diff --git a/mozilla/security/Makefile.in b/mozilla/security/Makefile.in
deleted file mode 100644
index 13d0700e4af..00000000000
--- a/mozilla/security/Makefile.in
+++ /dev/null
@@ -1,91 +0,0 @@
-#! gmake
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape security libraries.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are 
-# Copyright (C) 1994-2000 Netscape Communications Corporation.  All
-# Rights Reserved.
-# 
-# Contributor(s):
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU General Public License Version 2 or later (the
-# "GPL"), in which case the provisions of the GPL are applicable 
-# instead of those above.  If you wish to allow use of your 
-# version of this file only under the terms of the GPL and not to
-# allow others to use your version of this file under the MPL,
-# indicate your decision by deleting the provisions above and
-# replace them with the notice and other provisions required by
-# the GPL.  If you do not delete the provisions above, a recipient
-# may use your version of this file under either the MPL or the
-# GPL.
-#
-
-#######################################################################
-# (0) Initialize autoconf variables                                   #
-#######################################################################
-
-CORE_DEPTH	= .
-topsrcdir	= @top_srcdir@
-srcdir		= @srcdir@
-VPATH		= @srcdir@
-
-include $(CORE_DEPTH)/coreconf/autoconf.mk
-
-#######################################################################
-# (1) Include initial platform-independent assignments (MANDATORY).   #
-#######################################################################
-
-DIRS = coreconf nss
-
-#######################################################################
-# (2) Include "global" configuration information. (OPTIONAL)          #
-#######################################################################
-
-include $(topsrcdir)/coreconf/config.mk
-
-#######################################################################
-# (3) Include "component" configuration information. (OPTIONAL)       #
-#######################################################################
-
-
-
-#######################################################################
-# (4) Include "local" platform-dependent assignments (OPTIONAL).      #
-#######################################################################
-
-
-
-#######################################################################
-# (5) Execute "global" rules. (OPTIONAL)                              #
-#######################################################################
-
-include $(topsrcdir)/coreconf/rules.mk
-
-#######################################################################
-# (6) Execute "component" rules. (OPTIONAL)                           #
-#######################################################################
-
-
-
-#######################################################################
-# (7) Execute "local" rules. (OPTIONAL).                              #
-#######################################################################
-
-DIST_GARBAGE = config.cache config.log config.status \
-   coreconf/autoconf.mk unallmakefiles
-
-distclean::
-	cat unallmakefiles | $(XARGS) rm -f
-	rm -f unallmakefiles $(DIST_GARBAGE)
diff --git a/mozilla/security/aclocal.m4 b/mozilla/security/aclocal.m4
deleted file mode 100644
index 9a47303f568..00000000000
--- a/mozilla/security/aclocal.m4
+++ /dev/null
@@ -1 +0,0 @@
-builtin(include, build/autoconf/nspr.m4)dnl
diff --git a/mozilla/security/configure b/mozilla/security/configure
deleted file mode 100755
index d6c7d9df8e3..00000000000
--- a/mozilla/security/configure
+++ /dev/null
@@ -1,2967 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --with-dist-prefix=DIST_PREFIX
-                          place build files in DIST_PREFIX [dist]"
-ac_help="$ac_help
-  --with-dist-bindir=DIR  build execuatables in DIR [DIST_PREFIX/bin]"
-ac_help="$ac_help
-  --with-dist-includedir=DIR
-                          build include files in DIR [DIST_PREFIX/include]"
-ac_help="$ac_help
-  --with-dist-libdir=DIR  build library files in DIR [DIST_PREFIX/lib]"
-ac_help="$ac_help
-  --with-mozilla          Compile for Mozilla tree"
-ac_help="$ac_help
-  --enable-optimize       Enable code optimizations"
-ac_help="$ac_help
-  --disable-debug         Do not compile in debugging symbols"
-ac_help="$ac_help
-  --disable-cmd           Don't build command-line tools"
-ac_help="$ac_help
-  --with-nspr-prefix=PFX  Prefix where NSPR is installed"
-ac_help="$ac_help
-  --with-nspr-exec-prefix=PFX
-                          Exec prefix where NSPR is installed"
-ac_help="$ac_help
-  --disable-md            Do not use compiler-based dependencies "
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=coreconf/rules.mk
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in ${srcdir}/build/autoconf $srcdir/${srcdir}/build/autoconf; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ${srcdir}/build/autoconf $srcdir/${srcdir}/build/autoconf" 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:598: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:619: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:637: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
-cat >> confdefs.h <<\EOF
-#define USE_AUTOCONF 1
-EOF
-
-
-USE_PTHREADS=
-ENABLE_CMD=1
-MOZILLA_CLIENT=
-_OPTIMIZE_FLAGS=-O
-_DEBUG_FLAGS=-g
-MOZ_DEBUG=1
-MOZ_OPTIMIZE=
-
-CFLAGS="${CFLAGS=}"
-LDFLAGS="${LDFLAGS=}"
-HOST_CFLAGS="${HOST_CFLAGS=}"
-HOST_LDFLAGS="${HOST_LDFLAGS=}"
-
-dist_prefix='${MOD_DEPTH}/dist'
-dist_bindir='${dist_prefix}/bin'
-dist_includedir='${dist_prefix}/include'
-dist_libdir='${dist_prefix}/lib'
-
-# Check whether --with-dist-prefix or --without-dist-prefix was given.
-if test "${with_dist_prefix+set}" = set; then
-  withval="$with_dist_prefix"
-  dist_prefix=$withval
-fi
-
-
-# Check whether --with-dist-bindir or --without-dist-bindir was given.
-if test "${with_dist_bindir+set}" = set; then
-  withval="$with_dist_bindir"
-  dist_bindir=$withval
-fi
-
-
-# Check whether --with-dist-includedir or --without-dist-includedir was given.
-if test "${with_dist_includedir+set}" = set; then
-  withval="$with_dist_includedir"
-  dist_includedir=$withval
-fi
-
-
-# Check whether --with-dist-libdir or --without-dist-libdir was given.
-if test "${with_dist_libdir+set}" = set; then
-  withval="$with_dist_libdir"
-  dist_libdir=$withval
-fi
-
-
-
-
-
-
-
-# Check whether --with-mozilla or --without-mozilla was given.
-if test "${with_mozilla+set}" = set; then
-  withval="$with_mozilla"
-    if test "$withval" = "yes"; then
-           MOZILLA_CLIENT=1
-           else
-               MOZILLA_CLIENT=
-           fi
-fi
-
-
-# Check whether --enable-optimize or --disable-optimize was given.
-if test "${enable_optimize+set}" = set; then
-  enableval="$enable_optimize"
-  MOZ_OPTIMIZE=1
-fi
-
-
-# Check whether --enable-debug or --disable-debug was given.
-if test "${enable_debug+set}" = set; then
-  enableval="$enable_debug"
-  	if test "$enableval" = "no"; then
-    	    MOZ_DEBUG=
-	    fi
-fi
-
-
-
-
-# Check whether --enable-cmd or --disable-cmd was given.
-if test "${enable_cmd+set}" = set; then
-  enableval="$enable_cmd"
-    if test "$enableval" = "no"; then
-           ENABLE_CMD=
-           fi
-fi
-
-
-# Extract the first word of "whoami", so it can be a program name with args.
-set dummy whoami; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:757: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_WHOAMI'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$WHOAMI" in
-  /*)
-  ac_cv_path_WHOAMI="$WHOAMI" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_WHOAMI="$WHOAMI" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_WHOAMI="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_WHOAMI" && ac_cv_path_WHOAMI=":"
-  ;;
-esac
-fi
-WHOAMI="$ac_cv_path_WHOAMI"
-if test -n "$WHOAMI"; then
-  echo "$ac_t""$WHOAMI" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -n "$MOZ_DEBUG"; then
-    cat >> confdefs.h <<\EOF
-#define DEBUG 1
-EOF
-
-    cat >> confdefs.h <<EOF
-#define DEBUG_`$WHOAMI` 1
-EOF
-
-    DEFINES="$DEFINES -UNDEBUG"
-else
-    cat >> confdefs.h <<\EOF
-#define NDEBUG 1
-EOF
-
-    DEFINES="$DEFINES -UDEBUG"    
-fi
-
-
-if test "$target" != "$host"; then
-    echo "cross compiling from $host to $target"
-    cross_compiling=yes
-        
-    _SAVE_CC="$CC"
-    _SAVE_CFLAGS="$CFLAGS"   
-    _SAVE_LDFLAGS="$LDFLAGS"
-    
-    echo $ac_n "checking for $host compiler""... $ac_c" 1>&6
-echo "configure:818: checking for $host compiler" >&5
-    if test -z "$HOST_CC"; then
-            for ac_prog in gcc cc /usr/ucb/cc
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:825: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_HOST_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$HOST_CC"; then
-  ac_cv_prog_HOST_CC="$HOST_CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_HOST_CC="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-HOST_CC="$ac_cv_prog_HOST_CC"
-if test -n "$HOST_CC"; then
-  echo "$ac_t""$HOST_CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$HOST_CC" && break
-done
-test -n "$HOST_CC" || HOST_CC=""""
-
-            if test -z "$HOST_CC"; then
-                    { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-            fi
-    fi
-    echo "$ac_t""$HOST_CC" 1>&6
-    if test -z "$HOST_CFLAGS"; then
-            HOST_CFLAGS="$CFLAGS"
-    fi
-    if test -z "$HOST_LDFLAGS"; then
-            HOST_LDFLAGS="$LDFLAGS"
-    fi
-                
-    CC="$HOST_CC"
-    CFLAGS="$HOST_CFLAGS"
-    LDFLAGS="$HOST_LDFLAGS"
-    
-    echo $ac_n "checking whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:872: checking whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works" >&5
-    cat > conftest.$ac_ext <<EOF
-#line 874 "configure"
-#include "confdefs.h"
-
-int main() {
-return(0);
-; return 0; }
-EOF
-if { (eval echo configure:881: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_prog_host_cc_works=1 echo "$ac_t""yes" 1>&6
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  { echo "configure: error: installation or configuration problem: $host compiler $HOST_CC cannot create executables." 1>&2; exit 1; } 
-fi
-rm -f conftest*
-
-    CC=$_SAVE_CC
-    CFLAGS=$_SAVE_CFLAGS
-    LDFLAGS=$_SAVE_LDFLAGS
-
-    if test -z "$CC"; then
-            for ac_prog in "${target_alias}-gcc" "${target}-gcc"
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:902: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CC" && break
-done
-test -n "$CC" || CC=":"
-
-    fi
-    unset ac_cv_prog_CC
-    # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:937: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:967: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1018: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1050: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1061 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1066: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1092: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1097: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1106: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1125: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-   
-    if test -z "$CXX"; then
-            for ac_prog in "${target_alias}-g++" "${target}-g++"
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1162: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CXX"; then
-  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CXX="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CXX="$ac_cv_prog_CXX"
-if test -n "$CXX"; then
-  echo "$ac_t""$CXX" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CXX" && break
-done
-test -n "$CXX" || CXX=":"
-
-    fi
-    unset ac_cv_prog_CXX
-    for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1199: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CXX"; then
-  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CXX="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CXX="$ac_cv_prog_CXX"
-if test -n "$CXX"; then
-  echo "$ac_t""$CXX" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CXX" && break
-done
-test -n "$CXX" || CXX="gcc"
-
-
-echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1231: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
-
-ac_ext=C
-# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cxx_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1242 "configure"
-#include "confdefs.h"
-
-int main(){return(0);}
-EOF
-if { (eval echo configure:1247: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cxx_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cxx_cross=no
-  else
-    ac_cv_prog_cxx_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cxx_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
-if test $ac_cv_prog_cxx_works = no; then
-  { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1273: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
-cross_compiling=$ac_cv_prog_cxx_cross
-
-echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1278: checking whether we are using GNU C++" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.C <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1287: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gxx=yes
-else
-  ac_cv_prog_gxx=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gxx" 1>&6
-
-if test $ac_cv_prog_gxx = yes; then
-  GXX=yes
-else
-  GXX=
-fi
-
-ac_test_CXXFLAGS="${CXXFLAGS+set}"
-ac_save_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS=
-echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1306: checking whether ${CXX-g++} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.cc
-if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
-  ac_cv_prog_cxx_g=yes
-else
-  ac_cv_prog_cxx_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
-if test "$ac_test_CXXFLAGS" = set; then
-  CXXFLAGS="$ac_save_CXXFLAGS"
-elif test $ac_cv_prog_cxx_g = yes; then
-  if test "$GXX" = yes; then
-    CXXFLAGS="-g -O2"
-  else
-    CXXFLAGS="-g"
-  fi
-else
-  if test "$GXX" = yes; then
-    CXXFLAGS="-O2"
-  else
-    CXXFLAGS=
-  fi
-fi
-
-    if test -z "$RANLIB"; then
-            for ac_prog in "${target_alias}-ranlib" "${target}-ranlib"
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1343: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$RANLIB" && break
-done
-test -n "$RANLIB" || RANLIB=":"
-
-    fi
-    if test -z "$AR"; then
-            for ac_prog in "${target_alias}-ar" "${target}-ar"
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1380: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$AR" && break
-done
-test -n "$AR" || AR=":"
-
-    fi
-    if test -z "$AS"; then
-            for ac_prog in "${target_alias}-as" "${target}-as"
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1417: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$AS" && break
-done
-test -n "$AS" || AS=":"
-
-    fi
-    if test -z "$LD"; then
-            for ac_prog in "${target_alias}-ld" "${target}-ld"
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1454: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$LD"; then
-  ac_cv_prog_LD="$LD" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_LD="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-LD="$ac_cv_prog_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$LD" && break
-done
-test -n "$LD" || LD=":"
-
-    fi
-
-else
-    # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1490: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1520: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1571: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1603: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1614 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:1619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1645: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1650: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1659: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1678: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-    for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1714: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CXX"; then
-  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CXX="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CXX="$ac_cv_prog_CXX"
-if test -n "$CXX"; then
-  echo "$ac_t""$CXX" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CXX" && break
-done
-test -n "$CXX" || CXX="gcc"
-
-
-echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1746: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
-
-ac_ext=C
-# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cxx_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1757 "configure"
-#include "confdefs.h"
-
-int main(){return(0);}
-EOF
-if { (eval echo configure:1762: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cxx_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cxx_cross=no
-  else
-    ac_cv_prog_cxx_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cxx_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
-if test $ac_cv_prog_cxx_works = no; then
-  { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1788: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
-cross_compiling=$ac_cv_prog_cxx_cross
-
-echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1793: checking whether we are using GNU C++" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.C <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1802: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gxx=yes
-else
-  ac_cv_prog_gxx=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gxx" 1>&6
-
-if test $ac_cv_prog_gxx = yes; then
-  GXX=yes
-else
-  GXX=
-fi
-
-ac_test_CXXFLAGS="${CXXFLAGS+set}"
-ac_save_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS=
-echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1821: checking whether ${CXX-g++} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.cc
-if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
-  ac_cv_prog_cxx_g=yes
-else
-  ac_cv_prog_cxx_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
-if test "$ac_test_CXXFLAGS" = set; then
-  CXXFLAGS="$ac_save_CXXFLAGS"
-elif test $ac_cv_prog_cxx_g = yes; then
-  if test "$GXX" = yes; then
-    CXXFLAGS="-g -O2"
-  else
-    CXXFLAGS="-g"
-  fi
-else
-  if test "$GXX" = yes; then
-    CXXFLAGS="-O2"
-  else
-    CXXFLAGS=
-  fi
-fi
-
-    # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1855: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-    for ac_prog in as
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1887: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$AS" in
-  /*)
-  ac_cv_path_AS="$AS" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_AS="$AS" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_AS="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-fi
-AS="$ac_cv_path_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$AS" && break
-done
-test -n "$AS" || AS="$CC"
-
-    for ac_prog in ar
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1928: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$AR" in
-  /*)
-  ac_cv_path_AR="$AR" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_AR="$AR" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_AR="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-fi
-AR="$ac_cv_path_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$AR" && break
-done
-test -n "$AR" || AR=":"
-
-    for ac_prog in ld
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1969: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$LD" in
-  /*)
-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_LD="$LD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_LD="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-fi
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$LD" && break
-done
-test -n "$LD" || LD=":"
-
-    if test -z "$HOST_CC"; then
-            HOST_CC="$CC"
-    fi
-    if test -z "$HOST_CFLAGS"; then
-            HOST_CFLAGS="$CFLAGS"
-    fi
-fi          
-
-GNU_CC=
-GNU_CXX=
-
-if test "$GCC" = "yes"; then
-    GNU_CC=1   
-fi
-if test "`echo | $AS -V 2>&1 | grep -c GNU`" != "0"; then
-    GNU_AS=1
-fi
-rm -f a.out
-
-if test "$cross_compiling"  = "yes"; then
-    CROSS_COMPILE=1
-else
-    CROSS_COMPILE=
-fi
-
-
-for ac_prog in gawk mawk nawk awk
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2036: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AWK"; then
-  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AWK="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AWK="$ac_cv_prog_AWK"
-if test -n "$AWK"; then
-  echo "$ac_t""$AWK" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$AWK" && break
-done
-
-for ac_prog in gmake make
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2070: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_MAKE'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$MAKE" in
-  /*)
-  ac_cv_path_MAKE="$MAKE" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_MAKE="$MAKE" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_MAKE="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-fi
-MAKE="$ac_cv_path_MAKE"
-if test -n "$MAKE"; then
-  echo "$ac_t""$MAKE" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$MAKE" && break
-done
-test -n "$MAKE" || MAKE=":"
-
-_make_try=`$MAKE --version 2>/dev/null`
-if test ! "$_make_try"
-then
-        echo
-        echo "*** $MAKE is not GNU Make.  You will not be able to build NSS without GNU Make."
-        echo
-        exit 1
-fi
-_make_vers=`$MAKE --version | grep Make | $AWK '{ print \$4 }' | sed 's/,//'`
-if test "$_make_vers" = "3.77"
-then
-        echo
-        echo "*** Found GNU Make 3.77.  This version is known to have problems with the"
-        echo "*** wildcard function in certain circumstances.  You may experience infinite"
-        echo "*** looping while building NSS with 3.77.  If this happens, you can"
-        echo "*** either downgrade to 3.76.1 or try configuring with --disable-md."
-        echo
-fi
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:2126: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-for ac_prog in perl5 perl
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2157: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$PERL" in
-  /*)
-  ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_PERL="$PERL" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_PERL="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-fi
-PERL="$ac_cv_path_PERL"
-if test -n "$PERL"; then
-  echo "$ac_t""$PERL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$PERL" && break
-done
-test -n "$PERL" || PERL=":"
-
-if test -z "$PERL" || test "$PERL" = ":"; then
-    { echo "configure: error: perl not found in \$PATH" 1>&2; exit 1; }
-fi
-
-# Extract the first word of "xargs", so it can be a program name with args.
-set dummy xargs; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2200: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_XARGS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$XARGS" in
-  /*)
-  ac_cv_path_XARGS="$XARGS" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_XARGS="$XARGS" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_XARGS="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-fi
-XARGS="$ac_cv_path_XARGS"
-if test -n "$XARGS"; then
-  echo "$ac_t""$XARGS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-OBJ_SUFFIX=o
-LIB_SUFFIX=a
-DLL_SUFFIX=so
-MKSHLIB='$(CC) -shared -Wl,-soname -Wl,$(notdir $@)'
-AR_FLAGS='cr $@'
-AS='$(CC)'
-
-OS_TARGET=`uname -s`
-OS_ARCH=`uname -s | sed -e 's|/|_|g'`
-OS_RELEASE=`uname -r | awk -F\. '{ print $1 "." $2 }'`
-OS_TEST=`uname -m`
-
-if test "${OS_ARCH}" = "IRIX64"; then
-    OS_ARCH=IRIX
-fi
-   
-if test "${OS_TARGET}" = "IRIX64"; then
-    OS_TARGET=IRIX
-fi
-
-
-HOST_CFLAGS="$HOST_CFLAGS -DXP_UNIX"
-HOST_CXXFLAGS="$HOST_CXXFLAGS -DXP_UNIX"
-
-case "$target" in
-
-*-linux*)
-    USE_PTHREADS=1
-    cat >> confdefs.h <<\EOF
-#define XP_UNIX 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define LINUX 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define linux 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define _POSIX_SOURCE 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define _BSD_SOURCE 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define HAVE_STRERROR 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define LINUX1_2 1
-EOF
-
-    CFLAGS="$CFLAGS -ansi -Wall -pipe"
-    CXXFLAGS="$CXXFLAGS -ansi -Wall -pipe -fno-rtti -fno-exceptions"
-    DSO_CFLAGS=-fPIC
-    DSO_LDOPTS=-shared
-    _OPTIMIZE_FLAGS=-O2
-
-    if test -n "$USE_PTHREADS"; then
-        cat >> confdefs.h <<\EOF
-#define _REENTRANT 1
-EOF
-
-        OS_LIBS="-lpthread $OS_LIBS"                
-    fi
-
-    OS_LIBS="$OS_LIBS -ldl -lc"
-
-    case "${target_cpu}" in
-    alpha)
-        cat >> confdefs.h <<\EOF
-#define _ALPHA_ 1
-EOF
-
-        cat >> confdefs.h <<\EOF
-#define _XOPEN_SOURCE 1
-EOF
-
-        CFLAGS="$CFLAGS -mieee"
-        CXXFLAGS="$CXXFLAGS -mieee"
-        CPU_ARCH=alpha
-        ;;
-    i?86)
-        cat >> confdefs.h <<\EOF
-#define i386 1
-EOF
-
-        cat >> confdefs.h <<\EOF
-#define _XOPEN_SOURCE 1
-EOF
-
-        CPU_ARCH=x86
-        ;;
-    ppc)
-        cat >> confdefs.h <<\EOF
-#define MACLINUX 1
-EOF
-
-        CPU_ARCH=ppc
-        ;;
-    *)
-        ;;
-    esac
-
-    case "$OS_RELEASE" in
-    2.0)
-        cat >> confdefs.h <<\EOF
-#define LINUX2_0 1
-EOF
-
-        ;;
-    2.1)
-        cat >> confdefs.h <<\EOF
-#define LINUX2_1 1
-EOF
-
-        ;;
-    2.2)
-        cat >> confdefs.h <<\EOF
-#define LINUX2_1 1
-EOF
-
-        ;;
-    2.4)
-        cat >> confdefs.h <<\EOF
-#define LINUX2_1 1
-EOF
-
-        ;;
-    esac
-    ;;
-
-*-solaris*)
-    USE_PTHREADS=
-    cat >> confdefs.h <<\EOF
-#define XP_UNIX 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define SVR4 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define SYSV 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define __svr4 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define __svr4__ 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define SOLARIS 1
-EOF
-
-    cat >> confdefs.h <<\EOF
-#define _REENTRANT 1
-EOF
-
-    DSO_LDOPTS=-G
-    if test -n "$GNU_CC"; then
-      DSO_CFLAGS=-fPIC
-      CXXFLAGS="$CXXFLAGS -fno-rtti -fno-exceptions"
-      ASFLAGS="$ASFLAGS -x assembler-with-cpp"
-    else
-      DSO_CFLAGS=-KPIC
-    fi
-    AS='$(CC)'
-    if test -z "$GNU_AS"; then
-      ASFLAGS="$ASFLAGS -Wa,-P"
-    fi
-    if test -n "$USE_64" && test -z "$GNU_CC"; then
-      CC="$CC -xarch=v9"
-      CXX="$CXX -xarch=v9"
-    fi
-    case "${target_cpu}" in
-    sparc)
-      CPU_ARCH=sparc
-      ;;
-    esac
-
-    case "${target_os}" in
-    solaris2.5*)
-      cat >> confdefs.h <<\EOF
-#define SOLARIS2_5 1
-EOF
-
-      ;;
-    solaris2.6*)
-      cat >> confdefs.h <<\EOF
-#define _SVID_GETTOD 1
-EOF
-
-      cat >> confdefs.h <<\EOF
-#define SOLARIS2_6 1
-EOF
-
-      ;;
-    solaris2.7*)
-      cat >> confdefs.h <<\EOF
-#define _SVID_GETTOD 1
-EOF
-
-      cat >> confdefs.h <<\EOF
-#define SOLARIS2_7 1
-EOF
-
-      ;;
-    solaris2.8*)
-      cat >> confdefs.h <<\EOF
-#define _SVID_GETTOD 1
-EOF
-
-      cat >> confdefs.h <<\EOF
-#define SOLARIS2_8 1
-EOF
-
-      ;;
-    *)
-      ;;
-    esac
-
-    CFLAGS="$CFLAGS -I/usr/dt/include -I/usr/openwin/include"
-    OS_LIBS="$OS_LIBS -lthread -lnsl -lsocket -lposix4 -ldl -lc"
-    ;;
-
-esac
-
-
-
-
-
-
-
-# Check whether --with-nspr-prefix or --without-nspr-prefix was given.
-if test "${with_nspr_prefix+set}" = set; then
-  withval="$with_nspr_prefix"
-  nspr_config_prefix="$withval"
-else
-  nspr_config_prefix=""
-fi
-
-
-# Check whether --with-nspr-exec-prefix or --without-nspr-exec-prefix was given.
-if test "${with_nspr_exec_prefix+set}" = set; then
-  withval="$with_nspr_exec_prefix"
-  nspr_config_exec_prefix="$withval"
-else
-  nspr_config_exec_prefix=""
-fi
-
-
-	if test -n "$nspr_config_exec_prefix"; then
-		nspr_config_args="$nspr_config_args --exec-prefix=$nspr_config_exec_prefix"
-		if test -z "$NSPR_CONFIG"; then
-			NSPR_CONFIG=$nspr_config_exec_prefix/bin/nspr-config
-		fi
-	fi
-	if test -n "$nspr_config_prefix"; then
-		nspr_config_args="$nspr_config_args --prefix=$nspr_config_prefix"
-		if test -z "$NSPR_CONFIG"; then
-			NSPR_CONFIG=$nspr_config_prefix/bin/nspr-config
-		fi
-	fi
-
-	unset ac_cv_path_NSPR_CONFIG
-	# Extract the first word of "nspr-config", so it can be a program name with args.
-set dummy nspr-config; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2509: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_NSPR_CONFIG'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$NSPR_CONFIG" in
-  /*)
-  ac_cv_path_NSPR_CONFIG="$NSPR_CONFIG" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_NSPR_CONFIG="$NSPR_CONFIG" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_NSPR_CONFIG="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_NSPR_CONFIG" && ac_cv_path_NSPR_CONFIG="no"
-  ;;
-esac
-fi
-NSPR_CONFIG="$ac_cv_path_NSPR_CONFIG"
-if test -n "$NSPR_CONFIG"; then
-  echo "$ac_t""$NSPR_CONFIG" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-	min_nspr_version=4.0.0
-	echo $ac_n "checking for NSPR - version >= $min_nspr_version (skipping)""... $ac_c" 1>&6
-echo "configure:2544: checking for NSPR - version >= $min_nspr_version (skipping)" >&5
-
-	no_nspr=""
-	if test "$NSPR_CONFIG" = "no"; then
-		no_nspr="yes"
-	else
-		NSPR_CFLAGS=`$NSPR_CONFIG $nspr_config_args --cflags`
-		NSPR_LIBS=`$NSPR_CONFIG $nspr_config_args --libs`
-
-				nspr_config_major_version=`$NSPR_CONFIG $nspr_config_args --version | \
-			sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
-		nspr_config_minor_version=`$NSPR_CONFIG $nspr_config_args --version | \
-			sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
-		nspr_config_micro_version=`$NSPR_CONFIG $nspr_config_args --version | \
-			sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
-	fi
-
-	if test -z "$no_nspr"; then
-		echo "$ac_t""yes" 1>&6
-		MOZ_NATIVE_NSPR=1     
-	else
-		echo "$ac_t""no" 1>&6
-	fi
-
-
-	
-	
-
-
-
-if test -z "$MOZ_NATIVE_NSPR"; then
-    echo "configure: warning: nspr-config not found. building local copy of NSPR" 1>&2
-    NSPR_CFLAGS='`$(CORE_DEPTH)/../nsprpub/config/nspr-config --prefix=$(DIST) --cflags`'
-    case "$target" in
-    *-*-os2_vacpp)
-        NSPR_LIBS='$(DIST)/lib/nspr'$NSPR_VERSION'.lib $(DIST)/lib/plc'$NSPR_VERSION'.lib $(DIST)/lib/plds'$NSPR_VERSION'.lib '$_PTHREAD_LDFLAGS''
-        ;;
-    *)
-        NSPR_LIBS='`$(CORE_DEPTH)/../nsprpub/config/nspr-config --prefix=$(DIST) --libs`'
-        ;;
-    esac
-fi
-
-
-
-
-_cpp_md_flag=
-# Check whether --enable-md or --disable-md was given.
-if test "${enable_md+set}" = set; then
-  enableval="$enable_md"
-  :
-else
-        if test "$GNU_CC"; then
-     _cpp_md_flag=1
-   fi
-fi
-
-if test "$_cpp_md_flag"; then
-  COMPILER_DEPEND=1
-  MDDEPDIR='.deps'
-  _DEPEND_CFLAGS='$(filter-out %/.pp,-Wp,-MD,$(MDDEPDIR)/$(*F).pp)' 
-fi   
-
-if test -n "$MOZ_OPTIMIZE"; then
-    CFLAGS="$CFLAGS $_OPTIMIZE_FLAGS"
-fi
-
-if test -n "$MOZ_DEBUG"; then
-    CFLAGS="$CFLAGS $_DEBUG_FLAGS"
-fi
-
-CFLAGS=`echo \
-    $_DEPEND_CFLAGS \
-    $CFLAGS`
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-. ${srcdir}/secmakefiles.sh
-
-echo $MAKEFILES | $PERL $srcdir/build/autoconf/acoutput-fast.pl > conftest.sh
-. ./conftest.sh
-rm conftest.sh
-
-echo $MAKEFILES > unallmakefiles
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-
-trap 'rm -fr `echo "$MAKEFILES" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@dist_prefix@%$dist_prefix%g
-s%@dist_bindir@%$dist_bindir%g
-s%@dist_includedir@%$dist_includedir%g
-s%@dist_libdir@%$dist_libdir%g
-s%@WHOAMI@%$WHOAMI%g
-s%@HOST_CC@%$HOST_CC%g
-s%@CC@%$CC%g
-s%@CXX@%$CXX%g
-s%@RANLIB@%$RANLIB%g
-s%@AR@%$AR%g
-s%@AS@%$AS%g
-s%@LD@%$LD%g
-s%@AWK@%$AWK%g
-s%@MAKE@%$MAKE%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@PERL@%$PERL%g
-s%@XARGS@%$XARGS%g
-s%@NSPR_CONFIG@%$NSPR_CONFIG%g
-s%@NSPR_CFLAGS@%$NSPR_CFLAGS%g
-s%@NSPR_LIBS@%$NSPR_LIBS%g
-s%@MOZILLA_CLIENT@%$MOZILLA_CLIENT%g
-s%@ENABLE_CMD@%$ENABLE_CMD%g
-s%@HOST_CFLAGS@%$HOST_CFLAGS%g
-s%@COMPILER_DEPEND@%$COMPILER_DEPEND%g
-s%@MDDEPDIR@%$MDDEPDIR%g
-s%@ASFLAGS@%$ASFLAGS%g
-s%@DEFINES@%$DEFINES%g
-s%@MKSHLIB@%$MKSHLIB%g
-s%@DSO_CFLAGS@%$DSO_CFLAGS%g
-s%@DSO_LDOPTS@%$DSO_LDOPTS%g
-s%@AR_FLAGS@%$AR_FLAGS%g
-s%@OS_LIBS@%$OS_LIBS%g
-s%@USE_PTHREADS@%$USE_PTHREADS%g
-s%@OS_TARGET@%$OS_TARGET%g
-s%@OS_ARCH@%$OS_ARCH%g
-s%@OS_RELEASE@%$OS_RELEASE%g
-s%@OS_TEST@%$OS_TEST%g
-s%@CPU_ARCH@%$CPU_ARCH%g
-s%@LIB_SUFFIX@%$LIB_SUFFIX%g
-s%@DLL_SUFFIX@%$DLL_SUFFIX%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"$MAKEFILES"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-
diff --git a/mozilla/security/configure.in b/mozilla/security/configure.in
deleted file mode 100644
index 33b388192eb..00000000000
--- a/mozilla/security/configure.in
+++ /dev/null
@@ -1,554 +0,0 @@
-dnl -*- Mode: Autoconf; tab-width: 4; indent-tabs-mode: nil; -*-
-dnl The contents of this file are subject to the Mozilla Public
-dnl License Version 1.1 (the "License"); you may not use this file
-dnl except in compliance with the License. You may obtain a copy of
-dnl the License at http://www.mozilla.org/MPL/
-dnl
-dnl Software distributed under the License is distributed on an "AS
-dnl IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-dnl implied. See the License for the specific language governing
-dnl rights and limitations under the License.
-dnl
-dnl The Original Code is the configure.in script for NSS.
-dnl
-dnl The Initial Developer of the Original Code is Netscape
-dnl Communications. Portions created by Netscape Communications are
-dnl Copyright (C) 2000 Netscape Communications. All Rights Reserved.
-dnl
-dnl Contributor(s):
-dnl  Brian Ryner <bryner@netscape.com>
-dnl
-dnl Process this file with autoconf to produce a configure script.
-dnl
-AC_PREREQ(2.12)
-AC_INIT(coreconf/rules.mk)
-
-AC_CONFIG_AUX_DIR(${srcdir}/build/autoconf)
-AC_CANONICAL_SYSTEM
-
-dnl Set this define to make fixes w/o breaking anything else.
-AC_DEFINE(USE_AUTOCONF)
-
-dnl ========================================================
-dnl = Defaults
-dnl ========================================================
-USE_PTHREADS=
-ENABLE_CMD=1
-MOZILLA_CLIENT=
-_OPTIMIZE_FLAGS=-O
-_DEBUG_FLAGS=-g
-MOZ_DEBUG=1
-MOZ_OPTIMIZE=
-
-dnl ========================================================
-dnl =
-dnl = Dont change the following lines.  Doing so breaks:
-dnl =
-dnl = CFLAGS="-foo" ./configure
-dnl =
-dnl ========================================================
-CFLAGS="${CFLAGS=}"
-LDFLAGS="${LDFLAGS=}"
-HOST_CFLAGS="${HOST_CFLAGS=}"
-HOST_LDFLAGS="${HOST_LDFLAGS=}"
-
-dnl ========================================================
-dnl =
-dnl = Check options that may affect the compiler
-dnl =
-dnl ========================================================
-dist_prefix='${MOD_DEPTH}/dist'
-dist_bindir='${dist_prefix}/bin'
-dist_includedir='${dist_prefix}/include'
-dist_libdir='${dist_prefix}/lib'
-
-AC_ARG_WITH(dist-prefix,
-    [  --with-dist-prefix=DIST_PREFIX
-                          place build files in DIST_PREFIX [dist]],
-    dist_prefix=$withval)
-
-AC_ARG_WITH(dist-bindir,
-    [  --with-dist-bindir=DIR  build execuatables in DIR [DIST_PREFIX/bin]],
-    dist_bindir=$withval)
-
-AC_ARG_WITH(dist-includedir,
-    [  --with-dist-includedir=DIR
-                          build include files in DIR [DIST_PREFIX/include]],
-    dist_includedir=$withval)
-
-AC_ARG_WITH(dist-libdir,
-    [  --with-dist-libdir=DIR  build library files in DIR [DIST_PREFIX/lib]],
-    dist_libdir=$withval)
-
-AC_SUBST(dist_prefix)
-AC_SUBST(dist_bindir)
-AC_SUBST(dist_includedir)
-AC_SUBST(dist_libdir)
-
-AC_ARG_WITH(mozilla,
-    [  --with-mozilla          Compile for Mozilla tree],
-    [  if test "$withval" = "yes"; then
-           MOZILLA_CLIENT=1
-           else
-               MOZILLA_CLIENT=
-           fi])
-
-AC_ARG_ENABLE(optimize,
-    [  --enable-optimize       Enable code optimizations],
-    MOZ_OPTIMIZE=1)
-
-AC_ARG_ENABLE(debug,
-    [  --disable-debug         Do not compile in debugging symbols],
-    [	if test "$enableval" = "no"; then
-    	    MOZ_DEBUG=
-	    fi])
-
-dnl AC_ARG_ENABLE(shared,
-dnl    [  --disable-shared        Do not compile into shared libraries])
-
-dnl AC_ARG_ENABLE(target,
-dnl    [  --enable-target=\$t      Turn on features for target \$t when build has multiple targets],
-dnl    MOZ_TARGET=`echo $enableval | tr a-z A-Z`,
-dnl    MOZ_TARGET=)
-
-AC_ARG_ENABLE(cmd,
-    [  --disable-cmd           Don't build command-line tools],
-    [  if test "$enableval" = "no"; then
-           ENABLE_CMD=
-           fi])
-
-AC_PATH_PROG(WHOAMI, whoami, :)
-if test -n "$MOZ_DEBUG"; then
-    AC_DEFINE(DEBUG)
-    AC_DEFINE_UNQUOTED(DEBUG_`$WHOAMI`)
-    DEFINES="$DEFINES -UNDEBUG"
-else
-    AC_DEFINE(NDEBUG)
-    DEFINES="$DEFINES -UDEBUG"    
-fi
-
-dnl ========================================================
-dnl Checks for compilers.
-dnl ========================================================
-
-if test "$target" != "$host"; then
-    echo "cross compiling from $host to $target"
-    cross_compiling=yes
-        
-    _SAVE_CC="$CC"
-    _SAVE_CFLAGS="$CFLAGS"   
-    _SAVE_LDFLAGS="$LDFLAGS"
-    
-    AC_MSG_CHECKING([for $host compiler])
-    if test -z "$HOST_CC"; then
-            AC_CHECK_PROGS(HOST_CC, gcc cc /usr/ucb/cc, "")
-            if test -z "$HOST_CC"; then
-                    AC_MSG_ERROR([no acceptable cc found in \$PATH])
-            fi
-    fi
-    AC_MSG_RESULT([$HOST_CC])
-    if test -z "$HOST_CFLAGS"; then
-            HOST_CFLAGS="$CFLAGS"
-    fi
-    if test -z "$HOST_LDFLAGS"; then
-            HOST_LDFLAGS="$LDFLAGS"
-    fi
-                
-    CC="$HOST_CC"
-    CFLAGS="$HOST_CFLAGS"
-    LDFLAGS="$HOST_LDFLAGS"
-    
-    AC_MSG_CHECKING([whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works])
-    AC_TRY_COMPILE([], [return(0);],
-        [ac_cv_prog_host_cc_works=1 AC_MSG_RESULT([yes])],
-        AC_MSG_ERROR([installation or configuration problem: $host compiler $HOST_CC cannot create executables.]) )
-
-    CC=$_SAVE_CC
-    CFLAGS=$_SAVE_CFLAGS
-    LDFLAGS=$_SAVE_LDFLAGS
-
-    if test -z "$CC"; then
-            AC_CHECK_PROGS(CC, "${target_alias}-gcc" "${target}-gcc", :)
-    fi
-    unset ac_cv_prog_CC
-    AC_PROG_CC   
-    if test -z "$CXX"; then
-            AC_CHECK_PROGS(CXX, "${target_alias}-g++" "${target}-g++", :)
-    fi
-    unset ac_cv_prog_CXX
-    AC_PROG_CXX
-    if test -z "$RANLIB"; then
-            AC_CHECK_PROGS(RANLIB, "${target_alias}-ranlib" "${target}-ranlib", :)
-    fi
-    if test -z "$AR"; then
-            AC_CHECK_PROGS(AR, "${target_alias}-ar" "${target}-ar", :)
-    fi
-    if test -z "$AS"; then
-            AC_CHECK_PROGS(AS, "${target_alias}-as" "${target}-as", :)
-    fi
-    if test -z "$LD"; then
-            AC_CHECK_PROGS(LD, "${target_alias}-ld" "${target}-ld", :)
-    fi
-dnl    if test -z "$STRIP"; then
-dnl            AC_CHECK_PROGS(STRIP, "${target_alias}-strip" "${target}-strip", :)
-dnl    fi
-dnl    if test -z "$DLLTOOL"; then
-dnl            AC_CHECK_PROGS(DLLTOOL, "${target_alias}-dlltool" "${target}-dlltool", :)
-dnl    fi
-dnl    if test -z "$WINDRES"; then
-dnl            AC_CHECK_PROGS(WINDRES, "${target_alias}-windres" "${target}-windres", :)
-dnl    fi
-
-else
-    AC_PROG_CC
-    AC_PROG_CXX
-    AC_PROG_RANLIB
-    AC_PATH_PROGS(AS, as, $CC)
-    AC_PATH_PROGS(AR, ar, :)
-    AC_PATH_PROGS(LD, ld, :)
-dnl    AC_PATH_PROGS(STRIP, strip, :)
-dnl    AC_PATH_PROGS(DLLTOOL, dlltool, :)
-dnl    AC_PATH_PROGS(WINDRES, windres, :)
-    if test -z "$HOST_CC"; then
-            HOST_CC="$CC"
-    fi
-    if test -z "$HOST_CFLAGS"; then
-            HOST_CFLAGS="$CFLAGS"
-    fi
-fi          
-
-GNU_CC=
-GNU_CXX=
-
-if test "$GCC" = "yes"; then
-    GNU_CC=1   
-fi
-if test "`echo | $AS -V 2>&1 | grep -c GNU`" != "0"; then
-    GNU_AS=1
-fi
-rm -f a.out
-
-if test "$cross_compiling"  = "yes"; then
-    CROSS_COMPILE=1
-else
-    CROSS_COMPILE=
-fi
-
-dnl ========================================================
-dnl Checks for programs.
-dnl ========================================================
-
-AC_PROG_AWK
-dnl Be sure the make we use is GNU make.
-AC_PATH_PROGS(MAKE, gmake make, :)
-_make_try=`$MAKE --version 2>/dev/null`
-if test ! "$_make_try"
-then
-        echo
-        echo "*** $MAKE is not GNU Make.  You will not be able to build NSS without GNU Make."
-        echo
-        exit 1
-fi
-dnl Now warn about version 3.77 if we find it.
-_make_vers=`$MAKE --version | grep Make | $AWK '{ print \$4 }' | sed 's/,//'`
-if test "$_make_vers" = "3.77"
-then
-        echo
-        echo "*** Found GNU Make 3.77.  This version is known to have problems with the"
-        echo "*** wildcard function in certain circumstances.  You may experience infinite"
-        echo "*** looping while building NSS with 3.77.  If this happens, you can"
-        echo "*** either downgrade to 3.76.1 or try configuring with --disable-md."
-        echo
-fi
-
-AC_PROG_MAKE_SET
-AC_PATH_PROGS(PERL, perl5 perl, :)
-if test -z "$PERL" || test "$PERL" = ":"; then
-    AC_MSG_ERROR([perl not found in \$PATH])
-fi
-
-AC_PATH_PROG(XARGS, xargs)
-
-dnl ========================================================
-dnl Default platform specific options
-dnl ========================================================
-OBJ_SUFFIX=o
-LIB_SUFFIX=a
-DLL_SUFFIX=so
-MKSHLIB='$(CC) -shared -Wl,-soname -Wl,$(notdir $@)'
-AR_FLAGS='cr $@'
-AS='$(CC)'
-
-OS_TARGET=`uname -s`
-OS_ARCH=`uname -s | sed -e 's|/|_|g'`
-OS_RELEASE=`uname -r | awk -F\. '{ print $1 "." $2 }'`
-OS_TEST=`uname -m`
-
-if test "${OS_ARCH}" = "IRIX64"; then
-    OS_ARCH=IRIX
-fi
-   
-if test "${OS_TARGET}" = "IRIX64"; then
-    OS_TARGET=IRIX
-fi
-
-dnl ========================================================
-dnl Override of system specific host options
-dnl ========================================================
-
-HOST_CFLAGS="$HOST_CFLAGS -DXP_UNIX"
-HOST_CXXFLAGS="$HOST_CXXFLAGS -DXP_UNIX"
-
-dnl ========================================================
-dnl Override of system specific target options
-dnl ========================================================
-case "$target" in
-
-*-linux*)
-    USE_PTHREADS=1
-    AC_DEFINE(XP_UNIX)
-    AC_DEFINE(LINUX)
-    AC_DEFINE(linux)
-    AC_DEFINE(_POSIX_SOURCE)
-    AC_DEFINE(_BSD_SOURCE)
-    AC_DEFINE(HAVE_STRERROR)
-    AC_DEFINE(LINUX1_2)
-    CFLAGS="$CFLAGS -ansi -Wall -pipe"
-    CXXFLAGS="$CXXFLAGS -ansi -Wall -pipe -fno-rtti -fno-exceptions"
-    DSO_CFLAGS=-fPIC
-    DSO_LDOPTS=-shared
-    _OPTIMIZE_FLAGS=-O2
-
-    if test -n "$USE_PTHREADS"; then
-        AC_DEFINE(_REENTRANT)
-        OS_LIBS="-lpthread $OS_LIBS"                
-    fi
-
-    OS_LIBS="$OS_LIBS -ldl -lc"
-
-    case "${target_cpu}" in
-    alpha)
-        AC_DEFINE(_ALPHA_)
-        AC_DEFINE(_XOPEN_SOURCE)
-        CFLAGS="$CFLAGS -mieee"
-        CXXFLAGS="$CXXFLAGS -mieee"
-        CPU_ARCH=alpha
-        ;;
-    i?86)
-        AC_DEFINE(i386)
-        AC_DEFINE(_XOPEN_SOURCE)
-        CPU_ARCH=x86
-        ;;
-    ppc)
-        AC_DEFINE(MACLINUX)
-        CPU_ARCH=ppc
-        ;;
-    *)
-        ;;
-    esac
-
-    case "$OS_RELEASE" in
-    2.0)
-        AC_DEFINE(LINUX2_0)
-        ;;
-    2.1)
-        AC_DEFINE(LINUX2_1)
-        ;;
-    2.2)
-        AC_DEFINE(LINUX2_1)
-        ;;
-    2.4)
-        AC_DEFINE(LINUX2_1)
-        ;;
-    esac
-    ;;
-
-*-solaris*)
-    USE_PTHREADS=
-    AC_DEFINE(XP_UNIX)
-    AC_DEFINE(SVR4)
-    AC_DEFINE(SYSV)
-    AC_DEFINE(__svr4)
-    AC_DEFINE(__svr4__)
-    AC_DEFINE(SOLARIS)
-    AC_DEFINE(_REENTRANT)
-    DSO_LDOPTS=-G
-    if test -n "$GNU_CC"; then
-      DSO_CFLAGS=-fPIC
-      CXXFLAGS="$CXXFLAGS -fno-rtti -fno-exceptions"
-      ASFLAGS="$ASFLAGS -x assembler-with-cpp"
-    else
-      DSO_CFLAGS=-KPIC
-    fi
-    AS='$(CC)'
-    if test -z "$GNU_AS"; then
-      ASFLAGS="$ASFLAGS -Wa,-P"
-    fi
-    if test -n "$USE_64" && test -z "$GNU_CC"; then
-      CC="$CC -xarch=v9"
-      CXX="$CXX -xarch=v9"
-    fi
-    case "${target_cpu}" in
-    sparc)
-      CPU_ARCH=sparc
-      ;;
-    esac
-
-    case "${target_os}" in
-    solaris2.5*)
-      AC_DEFINE(SOLARIS2_5)
-      ;;
-    solaris2.6*)
-      AC_DEFINE(_SVID_GETTOD)
-      AC_DEFINE(SOLARIS2_6)
-      ;;
-    solaris2.7*)
-      AC_DEFINE(_SVID_GETTOD)
-      AC_DEFINE(SOLARIS2_7)
-      ;;
-    solaris2.8*)
-      AC_DEFINE(_SVID_GETTOD)
-      AC_DEFINE(SOLARIS2_8)
-      ;;
-    *)
-      ;;
-    esac
-
-    CFLAGS="$CFLAGS -I/usr/dt/include -I/usr/openwin/include"
-    OS_LIBS="$OS_LIBS -lthread -lnsl -lsocket -lposix4 -ldl -lc"
-    ;;
-
-esac
-
-dnl ========================================================
-dnl Check for system libraries
-dnl ========================================================
-
-dnl ========================================================
-dnl Check for system header files.
-dnl ========================================================
-
-dnl ========================================================
-dnl Check for typedefs and structs
-dnl ========================================================
-
-dnl ========================================================
-dnl Checks for library functions.
-dnl ========================================================
-
-dnl ========================================================
-dnl Check options
-dnl ========================================================
-dnl ========================================================
-dnl =
-dnl = If NSPR was not detected in the system, 
-dnl = use the one in the source tree (mozilla/nsprpub)
-dnl =
-dnl ========================================================
-
-AM_PATH_NSPR(4.0.0, [MOZ_NATIVE_NSPR=1], [MOZ_NATIVE_NSPR=])
-
-if test -z "$MOZ_NATIVE_NSPR"; then
-    AC_MSG_WARN(nspr-config not found. building local copy of NSPR)
-    NSPR_CFLAGS='`$(CORE_DEPTH)/../nsprpub/config/nspr-config --prefix=$(DIST) --cflags`'
-    case "$target" in
-    *-*-os2_vacpp)
-        NSPR_LIBS='$(DIST)/lib/nspr'$NSPR_VERSION'.lib $(DIST)/lib/plc'$NSPR_VERSION'.lib $(DIST)/lib/plds'$NSPR_VERSION'.lib '$_PTHREAD_LDFLAGS''
-        ;;
-    *)
-        NSPR_LIBS='`$(CORE_DEPTH)/../nsprpub/config/nspr-config --prefix=$(DIST) --libs`'
-        ;;
-    esac
-fi
-
-
-
-
-_cpp_md_flag=
-AC_ARG_ENABLE(md,
-[  --disable-md            Do not use compiler-based dependencies ],[],
-  [dnl Default is to turn on -MD if using GNU-compatible compilers
-   dnl XXX make this check GNU_CXX when that test is hooked up
-   if test "$GNU_CC"; then
-     _cpp_md_flag=1
-   fi])
-if test "$_cpp_md_flag"; then
-  COMPILER_DEPEND=1
-  MDDEPDIR='.deps'
-  _DEPEND_CFLAGS='$(filter-out %/.pp,-Wp,-MD,$(MDDEPDIR)/$(*F).pp)' 
-fi   
-
-if test -n "$MOZ_OPTIMIZE"; then
-    CFLAGS="$CFLAGS $_OPTIMIZE_FLAGS"
-fi
-
-if test -n "$MOZ_DEBUG"; then
-    CFLAGS="$CFLAGS $_DEBUG_FLAGS"
-fi
-
-CFLAGS=`echo \
-    $_DEPEND_CFLAGS \
-    $CFLAGS`
-
-dnl ========================================================
-dnl Substitution of found variables.
-dnl ========================================================
-
-dnl Build options
-AC_SUBST(MOZILLA_CLIENT)
-AC_SUBST(ENABLE_CMD)
-
-dnl Program locations
-AC_SUBST(HOST_CC)
-AC_SUBST(AS)
-AC_SUBST(AR)
-AC_SUBST(LD)
-
-dnl Compiler characteristics/flags
-AC_SUBST(CFLAGS)
-AC_SUBST(CXXFLAGS)
-AC_SUBST(HOST_CFLAGS)
-AC_SUBST(COMPILER_DEPEND)
-AC_SUBST(MDDEPDIR)
-AC_SUBST(ASFLAGS)
-AC_SUBST(DEFINES)
-AC_SUBST(DEFS)
-dnl AC_SUBST(GNU_CC)
-dnl AC_SUBST(GNU_CXX)
-
-dnl Linker characteristics/flags
-AC_SUBST(LDFLAGS)
-AC_SUBST(MKSHLIB)
-AC_SUBST(DSO_CFLAGS)
-AC_SUBST(DSO_LDOPTS)
-AC_SUBST(AR_FLAGS)
-AC_SUBST(OS_LIBS)
-dnl AC_SUBST(DLLTOOL)
-dnl AC_SUBST(WINDRES)
-
-dnl Implementation options
-AC_SUBST(USE_PTHREADS)
-
-dnl System characteristics
-AC_SUBST(OS_TARGET)
-AC_SUBST(OS_ARCH)
-AC_SUBST(OS_RELEASE)
-AC_SUBST(OS_TEST)
-AC_SUBST(CPU_ARCH)
-AC_SUBST(LIB_SUFFIX)
-AC_SUBST(DLL_SUFFIX)
-dnl AC_SUBST(OBJ_SUFFIX)
-
-dnl ========================================================
-dnl Generate output files.
-dnl ========================================================
-. ${srcdir}/secmakefiles.sh
-
-echo $MAKEFILES | $PERL $srcdir/build/autoconf/acoutput-fast.pl > conftest.sh
-. ./conftest.sh
-rm conftest.sh
-
-echo $MAKEFILES > unallmakefiles
-
-AC_OUTPUT($MAKEFILES)
-
diff --git a/mozilla/security/secmakefiles.sh b/mozilla/security/secmakefiles.sh
deleted file mode 100755
index d45ae149822..00000000000
--- a/mozilla/security/secmakefiles.sh
+++ /dev/null
@@ -1,59 +0,0 @@
-#! /bin/sh
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1999 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#
-
-# allmakefiles.sh - List of all makefiles. 
-#   Appends the list of makefiles to the variable, MAKEFILES.
-#   There is no need to rerun autoconf after adding makefiles.
-#   You only need to run configure.
-#
-#   Please keep the modules in this file in sync with those in
-#   mozilla/build/unix/modules.mk
-#
-
-MAKEFILES=""
-
-# add_makefiles - Shell function to add makefiles to MAKEFILES
-add_makefiles() {
-    MAKEFILES="$MAKEFILES $*"
-}
-
-if [ "$srcdir" = "" ]; then
-    srcdir=.
-fi
-
-#
-# Common makefiles used by everyone
-#
-
-add_makefiles "
-Makefile
-coreconf/autoconf.mk
-coreconf/Makefile
-coreconf/mkdepend/Makefile
-coreconf/nsinstall/Makefile
-"
-
-MAKEFILES_nss=`cat ${srcdir}/nss/makefiles`
-
-add_makefiles "
-$MAKEFILES_nss
-"