diff --git a/mozilla/security/nss/cmd/SSLsample/NSPRerrs.h b/mozilla/security/nss/cmd/SSLsample/NSPRerrs.h deleted file mode 100644 index 8a6a49f6339..00000000000 --- a/mozilla/security/nss/cmd/SSLsample/NSPRerrs.h +++ /dev/null @@ -1,136 +0,0 @@ -/* ***** BEGIN LICENSE BLOCK ***** - * Version: MPL 1.1/GPL 2.0/LGPL 2.1 - * - * The contents of this file are subject to the Mozilla Public License Version - * 1.1 (the "License"); you may not use this file except in compliance with - * the License. You may obtain a copy of the License at - * http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" basis, - * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License - * for the specific language governing rights and limitations under the - * License. - * - * The Original Code is the Netscape security libraries. - * - * The Initial Developer of the Original Code is - * Netscape Communications Corporation. - * Portions created by the Initial Developer are Copyright (C) 1994-2000 - * the Initial Developer. All Rights Reserved. - * - * Contributor(s): - * - * Alternatively, the contents of this file may be used under the terms of - * either the GNU General Public License Version 2 or later (the "GPL"), or - * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), - * in which case the provisions of the GPL or the LGPL are applicable instead - * of those above. If you wish to allow use of your version of this file only - * under the terms of either the GPL or the LGPL, and not to allow others to - * use your version of this file under the terms of the MPL, indicate your - * decision by deleting the provisions above and replace them with the notice - * and other provisions required by the GPL or the LGPL. If you do not delete - * the provisions above, a recipient may use your version of this file under - * the terms of any one of the MPL, the GPL or the LGPL. - * - * ***** END LICENSE BLOCK ***** */ -/* General NSPR 2.0 errors */ -/* Caller must #include "prerror.h" */ - -ER2( PR_OUT_OF_MEMORY_ERROR, "Memory allocation attempt failed." ) -ER2( PR_BAD_DESCRIPTOR_ERROR, "Invalid file descriptor." ) -ER2( PR_WOULD_BLOCK_ERROR, "The operation would have blocked." ) -ER2( PR_ACCESS_FAULT_ERROR, "Invalid memory address argument." ) -ER2( PR_INVALID_METHOD_ERROR, "Invalid function for file type." ) -ER2( PR_ILLEGAL_ACCESS_ERROR, "Invalid memory address argument." ) -ER2( PR_UNKNOWN_ERROR, "Some unknown error has occurred." ) -ER2( PR_PENDING_INTERRUPT_ERROR,"Operation interrupted by another thread." ) -ER2( PR_NOT_IMPLEMENTED_ERROR, "function not implemented." ) -ER2( PR_IO_ERROR, "I/O function error." ) -ER2( PR_IO_TIMEOUT_ERROR, "I/O operation timed out." ) -ER2( PR_IO_PENDING_ERROR, "I/O operation on busy file descriptor." ) -ER2( PR_DIRECTORY_OPEN_ERROR, "The directory could not be opened." ) -ER2( PR_INVALID_ARGUMENT_ERROR, "Invalid function argument." ) -ER2( PR_ADDRESS_NOT_AVAILABLE_ERROR, "Network address not available (in use?)." ) -ER2( PR_ADDRESS_NOT_SUPPORTED_ERROR, "Network address type not supported." ) -ER2( PR_IS_CONNECTED_ERROR, "Already connected." ) -ER2( PR_BAD_ADDRESS_ERROR, "Network address is invalid." ) -ER2( PR_ADDRESS_IN_USE_ERROR, "Local Network address is in use." ) -ER2( PR_CONNECT_REFUSED_ERROR, "Connection refused by peer." ) -ER2( PR_NETWORK_UNREACHABLE_ERROR, "Network address is presently unreachable." ) -ER2( PR_CONNECT_TIMEOUT_ERROR, "Connection attempt timed out." ) -ER2( PR_NOT_CONNECTED_ERROR, "Network file descriptor is not connected." ) -ER2( PR_LOAD_LIBRARY_ERROR, "Failure to load dynamic library." ) -ER2( PR_UNLOAD_LIBRARY_ERROR, "Failure to unload dynamic library." ) -ER2( PR_FIND_SYMBOL_ERROR, -"Symbol not found in any of the loaded dynamic libraries." ) -ER2( PR_INSUFFICIENT_RESOURCES_ERROR, "Insufficient system resources." ) -ER2( PR_DIRECTORY_LOOKUP_ERROR, -"A directory lookup on a network address has failed." ) -ER2( PR_TPD_RANGE_ERROR, -"Attempt to access a TPD key that is out of range." ) -ER2( PR_PROC_DESC_TABLE_FULL_ERROR, "Process open FD table is full." ) -ER2( PR_SYS_DESC_TABLE_FULL_ERROR, "System open FD table is full." ) -ER2( PR_NOT_SOCKET_ERROR, -"Network operation attempted on non-network file descriptor." ) -ER2( PR_NOT_TCP_SOCKET_ERROR, -"TCP-specific function attempted on a non-TCP file descriptor." ) -ER2( PR_SOCKET_ADDRESS_IS_BOUND_ERROR, "TCP file descriptor is already bound." ) -ER2( PR_NO_ACCESS_RIGHTS_ERROR, "Access Denied." ) -ER2( PR_OPERATION_NOT_SUPPORTED_ERROR, -"The requested operation is not supported by the platform." ) -ER2( PR_PROTOCOL_NOT_SUPPORTED_ERROR, -"The host operating system does not support the protocol requested." ) -ER2( PR_REMOTE_FILE_ERROR, "Access to the remote file has been severed." ) -ER2( PR_BUFFER_OVERFLOW_ERROR, -"The value requested is too large to be stored in the data buffer provided." ) -ER2( PR_CONNECT_RESET_ERROR, "TCP connection reset by peer." ) -ER2( PR_RANGE_ERROR, "Unused." ) -ER2( PR_DEADLOCK_ERROR, "The operation would have deadlocked." ) -ER2( PR_FILE_IS_LOCKED_ERROR, "The file is already locked." ) -ER2( PR_FILE_TOO_BIG_ERROR, -"Write would result in file larger than the system allows." ) -ER2( PR_NO_DEVICE_SPACE_ERROR, "The device for storing the file is full." ) -ER2( PR_PIPE_ERROR, "Unused." ) -ER2( PR_NO_SEEK_DEVICE_ERROR, "Unused." ) -ER2( PR_IS_DIRECTORY_ERROR, -"Cannot perform a normal file operation on a directory." ) -ER2( PR_LOOP_ERROR, "Symbolic link loop." ) -ER2( PR_NAME_TOO_LONG_ERROR, "File name is too long." ) -ER2( PR_FILE_NOT_FOUND_ERROR, "File not found." ) -ER2( PR_NOT_DIRECTORY_ERROR, -"Cannot perform directory operation on a normal file." ) -ER2( PR_READ_ONLY_FILESYSTEM_ERROR, -"Cannot write to a read-only file system." ) -ER2( PR_DIRECTORY_NOT_EMPTY_ERROR, -"Cannot delete a directory that is not empty." ) -ER2( PR_FILESYSTEM_MOUNTED_ERROR, -"Cannot delete or rename a file object while the file system is busy." ) -ER2( PR_NOT_SAME_DEVICE_ERROR, -"Cannot rename a file to a file system on another device." ) -ER2( PR_DIRECTORY_CORRUPTED_ERROR, -"The directory object in the file system is corrupted." ) -ER2( PR_FILE_EXISTS_ERROR, -"Cannot create or rename a filename that already exists." ) -ER2( PR_MAX_DIRECTORY_ENTRIES_ERROR, -"Directory is full. No additional filenames may be added." ) -ER2( PR_INVALID_DEVICE_STATE_ERROR, -"The required device was in an invalid state." ) -ER2( PR_DEVICE_IS_LOCKED_ERROR, "The device is locked." ) -ER2( PR_NO_MORE_FILES_ERROR, "No more entries in the directory." ) -ER2( PR_END_OF_FILE_ERROR, "Encountered end of file." ) -ER2( PR_FILE_SEEK_ERROR, "Seek error." ) -ER2( PR_FILE_IS_BUSY_ERROR, "The file is busy." ) -ER2( PR_IN_PROGRESS_ERROR, -"Operation is still in progress (probably a non-blocking connect)." ) -ER2( PR_ALREADY_INITIATED_ERROR, -"Operation has already been initiated (probably a non-blocking connect)." ) - -#ifdef PR_GROUP_EMPTY_ERROR -ER2( PR_GROUP_EMPTY_ERROR, "The wait group is empty." ) -#endif - -#ifdef PR_INVALID_STATE_ERROR -ER2( PR_INVALID_STATE_ERROR, "Object state improper for request." ) -#endif - -ER2( PR_MAX_ERROR, "Placeholder for the end of the list" ) diff --git a/mozilla/security/nss/cmd/SSLsample/SECerrs.h b/mozilla/security/nss/cmd/SSLsample/SECerrs.h deleted file mode 100644 index 90f7a2e9f13..00000000000 --- a/mozilla/security/nss/cmd/SSLsample/SECerrs.h +++ /dev/null @@ -1,444 +0,0 @@ -/* ***** BEGIN LICENSE BLOCK ***** - * Version: MPL 1.1/GPL 2.0/LGPL 2.1 - * - * The contents of this file are subject to the Mozilla Public License Version - * 1.1 (the "License"); you may not use this file except in compliance with - * the License. You may obtain a copy of the License at - * http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" basis, - * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License - * for the specific language governing rights and limitations under the - * License. - * - * The Original Code is the Netscape security libraries. - * - * The Initial Developer of the Original Code is - * Netscape Communications Corporation. - * Portions created by the Initial Developer are Copyright (C) 1994-2000 - * the Initial Developer. All Rights Reserved. - * - * Contributor(s): - * - * Alternatively, the contents of this file may be used under the terms of - * either the GNU General Public License Version 2 or later (the "GPL"), or - * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), - * in which case the provisions of the GPL or the LGPL are applicable instead - * of those above. If you wish to allow use of your version of this file only - * under the terms of either the GPL or the LGPL, and not to allow others to - * use your version of this file under the terms of the MPL, indicate your - * decision by deleting the provisions above and replace them with the notice - * and other provisions required by the GPL or the LGPL. If you do not delete - * the provisions above, a recipient may use your version of this file under - * the terms of any one of the MPL, the GPL or the LGPL. - * - * ***** END LICENSE BLOCK ***** */ - -/* General security error codes */ -/* Caller must #include "secerr.h" */ - -ER3(SEC_ERROR_IO, SEC_ERROR_BASE + 0, -"An I/O error occurred during security authorization.") - -ER3(SEC_ERROR_LIBRARY_FAILURE, SEC_ERROR_BASE + 1, -"security library failure.") - -ER3(SEC_ERROR_BAD_DATA, SEC_ERROR_BASE + 2, -"security library: received bad data.") - -ER3(SEC_ERROR_OUTPUT_LEN, SEC_ERROR_BASE + 3, -"security library: output length error.") - -ER3(SEC_ERROR_INPUT_LEN, SEC_ERROR_BASE + 4, -"security library has experienced an input length error.") - -ER3(SEC_ERROR_INVALID_ARGS, SEC_ERROR_BASE + 5, -"security library: invalid arguments.") - -ER3(SEC_ERROR_INVALID_ALGORITHM, SEC_ERROR_BASE + 6, -"security library: invalid algorithm.") - -ER3(SEC_ERROR_INVALID_AVA, SEC_ERROR_BASE + 7, -"security library: invalid AVA.") - -ER3(SEC_ERROR_INVALID_TIME, SEC_ERROR_BASE + 8, -"Improperly formatted time string.") - -ER3(SEC_ERROR_BAD_DER, SEC_ERROR_BASE + 9, -"security library: improperly formatted DER-encoded message.") - -ER3(SEC_ERROR_BAD_SIGNATURE, SEC_ERROR_BASE + 10, -"Peer's certificate has an invalid signature.") - -ER3(SEC_ERROR_EXPIRED_CERTIFICATE, SEC_ERROR_BASE + 11, -"Peer's Certificate has expired.") - -ER3(SEC_ERROR_REVOKED_CERTIFICATE, SEC_ERROR_BASE + 12, -"Peer's Certificate has been revoked.") - -ER3(SEC_ERROR_UNKNOWN_ISSUER, SEC_ERROR_BASE + 13, -"Peer's Certificate issuer is not recognized.") - -ER3(SEC_ERROR_BAD_KEY, SEC_ERROR_BASE + 14, -"Peer's public key is invalid.") - -ER3(SEC_ERROR_BAD_PASSWORD, SEC_ERROR_BASE + 15, -"The security password entered is incorrect.") - -ER3(SEC_ERROR_RETRY_PASSWORD, SEC_ERROR_BASE + 16, -"New password entered incorrectly. Please try again.") - -ER3(SEC_ERROR_NO_NODELOCK, SEC_ERROR_BASE + 17, -"security library: no nodelock.") - -ER3(SEC_ERROR_BAD_DATABASE, SEC_ERROR_BASE + 18, -"security library: bad database.") - -ER3(SEC_ERROR_NO_MEMORY, SEC_ERROR_BASE + 19, -"security library: memory allocation failure.") - -ER3(SEC_ERROR_UNTRUSTED_ISSUER, SEC_ERROR_BASE + 20, -"Peer's certificate issuer has been marked as not trusted by the user.") - -ER3(SEC_ERROR_UNTRUSTED_CERT, SEC_ERROR_BASE + 21, -"Peer's certificate has been marked as not trusted by the user.") - -ER3(SEC_ERROR_DUPLICATE_CERT, (SEC_ERROR_BASE + 22), -"Certificate already exists in your database.") - -ER3(SEC_ERROR_DUPLICATE_CERT_NAME, (SEC_ERROR_BASE + 23), -"Downloaded certificate's name duplicates one already in your database.") - -ER3(SEC_ERROR_ADDING_CERT, (SEC_ERROR_BASE + 24), -"Error adding certificate to database.") - -ER3(SEC_ERROR_FILING_KEY, (SEC_ERROR_BASE + 25), -"Error refiling the key for this certificate.") - -ER3(SEC_ERROR_NO_KEY, (SEC_ERROR_BASE + 26), -"The private key for this certificate cannot be found in key database") - -ER3(SEC_ERROR_CERT_VALID, (SEC_ERROR_BASE + 27), -"This certificate is valid.") - -ER3(SEC_ERROR_CERT_NOT_VALID, (SEC_ERROR_BASE + 28), -"This certificate is not valid.") - -ER3(SEC_ERROR_CERT_NO_RESPONSE, (SEC_ERROR_BASE + 29), -"Cert Library: No Response") - -ER3(SEC_ERROR_EXPIRED_ISSUER_CERTIFICATE, (SEC_ERROR_BASE + 30), -"The certificate issuer's certificate has expired. Check your system date and time.") - -ER3(SEC_ERROR_CRL_EXPIRED, (SEC_ERROR_BASE + 31), -"The CRL for the certificate's issuer has expired. Update it or check your system data and time.") - -ER3(SEC_ERROR_CRL_BAD_SIGNATURE, (SEC_ERROR_BASE + 32), -"The CRL for the certificate's issuer has an invalid signature.") - -ER3(SEC_ERROR_CRL_INVALID, (SEC_ERROR_BASE + 33), -"New CRL has an invalid format.") - -ER3(SEC_ERROR_EXTENSION_VALUE_INVALID, (SEC_ERROR_BASE + 34), -"Certificate extension value is invalid.") - -ER3(SEC_ERROR_EXTENSION_NOT_FOUND, (SEC_ERROR_BASE + 35), -"Certificate extension not found.") - -ER3(SEC_ERROR_CA_CERT_INVALID, (SEC_ERROR_BASE + 36), -"Issuer certificate is invalid.") - -ER3(SEC_ERROR_PATH_LEN_CONSTRAINT_INVALID, (SEC_ERROR_BASE + 37), -"Certificate path length constraint is invalid.") - -ER3(SEC_ERROR_CERT_USAGES_INVALID, (SEC_ERROR_BASE + 38), -"Certificate usages field is invalid.") - -ER3(SEC_INTERNAL_ONLY, (SEC_ERROR_BASE + 39), -"**Internal ONLY module**") - -ER3(SEC_ERROR_INVALID_KEY, (SEC_ERROR_BASE + 40), -"The key does not support the requested operation.") - -ER3(SEC_ERROR_UNKNOWN_CRITICAL_EXTENSION, (SEC_ERROR_BASE + 41), -"Certificate contains unknown critical extension.") - -ER3(SEC_ERROR_OLD_CRL, (SEC_ERROR_BASE + 42), -"New CRL is not later than the current one.") - -ER3(SEC_ERROR_NO_EMAIL_CERT, (SEC_ERROR_BASE + 43), -"Not encrypted or signed: you do not yet have an email certificate.") - -ER3(SEC_ERROR_NO_RECIPIENT_CERTS_QUERY, (SEC_ERROR_BASE + 44), -"Not encrypted: you do not have certificates for each of the recipients.") - -ER3(SEC_ERROR_NOT_A_RECIPIENT, (SEC_ERROR_BASE + 45), -"Cannot decrypt: you are not a recipient, or matching certificate and \ -private key not found.") - -ER3(SEC_ERROR_PKCS7_KEYALG_MISMATCH, (SEC_ERROR_BASE + 46), -"Cannot decrypt: key encryption algorithm does not match your certificate.") - -ER3(SEC_ERROR_PKCS7_BAD_SIGNATURE, (SEC_ERROR_BASE + 47), -"Signature verification failed: no signer found, too many signers found, \ -or improper or corrupted data.") - -ER3(SEC_ERROR_UNSUPPORTED_KEYALG, (SEC_ERROR_BASE + 48), -"Unsupported or unknown key algorithm.") - -ER3(SEC_ERROR_DECRYPTION_DISALLOWED, (SEC_ERROR_BASE + 49), -"Cannot decrypt: encrypted using a disallowed algorithm or key size.") - - -/* Fortezza Alerts */ -ER3(XP_SEC_FORTEZZA_BAD_CARD, (SEC_ERROR_BASE + 50), -"Fortezza card has not been properly initialized. \ -Please remove it and return it to your issuer.") - -ER3(XP_SEC_FORTEZZA_NO_CARD, (SEC_ERROR_BASE + 51), -"No Fortezza cards Found") - -ER3(XP_SEC_FORTEZZA_NONE_SELECTED, (SEC_ERROR_BASE + 52), -"No Fortezza card selected") - -ER3(XP_SEC_FORTEZZA_MORE_INFO, (SEC_ERROR_BASE + 53), -"Please select a personality to get more info on") - -ER3(XP_SEC_FORTEZZA_PERSON_NOT_FOUND, (SEC_ERROR_BASE + 54), -"Personality not found") - -ER3(XP_SEC_FORTEZZA_NO_MORE_INFO, (SEC_ERROR_BASE + 55), -"No more information on that Personality") - -ER3(XP_SEC_FORTEZZA_BAD_PIN, (SEC_ERROR_BASE + 56), -"Invalid Pin") - -ER3(XP_SEC_FORTEZZA_PERSON_ERROR, (SEC_ERROR_BASE + 57), -"Couldn't initialize Fortezza personalities.") -/* end fortezza alerts. */ - -ER3(SEC_ERROR_NO_KRL, (SEC_ERROR_BASE + 58), -"No KRL for this site's certificate has been found.") - -ER3(SEC_ERROR_KRL_EXPIRED, (SEC_ERROR_BASE + 59), -"The KRL for this site's certificate has expired.") - -ER3(SEC_ERROR_KRL_BAD_SIGNATURE, (SEC_ERROR_BASE + 60), -"The KRL for this site's certificate has an invalid signature.") - -ER3(SEC_ERROR_REVOKED_KEY, (SEC_ERROR_BASE + 61), -"The key for this site's certificate has been revoked.") - -ER3(SEC_ERROR_KRL_INVALID, (SEC_ERROR_BASE + 62), -"New KRL has an invalid format.") - -ER3(SEC_ERROR_NEED_RANDOM, (SEC_ERROR_BASE + 63), -"security library: need random data.") - -ER3(SEC_ERROR_NO_MODULE, (SEC_ERROR_BASE + 64), -"security library: no security module can perform the requested operation.") - -ER3(SEC_ERROR_NO_TOKEN, (SEC_ERROR_BASE + 65), -"The security card or token does not exist, needs to be initialized, or has been removed.") - -ER3(SEC_ERROR_READ_ONLY, (SEC_ERROR_BASE + 66), -"security library: read-only database.") - -ER3(SEC_ERROR_NO_SLOT_SELECTED, (SEC_ERROR_BASE + 67), -"No slot or token was selected.") - -ER3(SEC_ERROR_CERT_NICKNAME_COLLISION, (SEC_ERROR_BASE + 68), -"A certificate with the same nickname already exists.") - -ER3(SEC_ERROR_KEY_NICKNAME_COLLISION, (SEC_ERROR_BASE + 69), -"A key with the same nickname already exists.") - -ER3(SEC_ERROR_SAFE_NOT_CREATED, (SEC_ERROR_BASE + 70), -"error while creating safe object") - -ER3(SEC_ERROR_BAGGAGE_NOT_CREATED, (SEC_ERROR_BASE + 71), -"error while creating baggage object") - -ER3(XP_JAVA_REMOVE_PRINCIPAL_ERROR, (SEC_ERROR_BASE + 72), -"Couldn't remove the principal") - -ER3(XP_JAVA_DELETE_PRIVILEGE_ERROR, (SEC_ERROR_BASE + 73), -"Couldn't delete the privilege") - -ER3(XP_JAVA_CERT_NOT_EXISTS_ERROR, (SEC_ERROR_BASE + 74), -"This principal doesn't have a certificate") - -ER3(SEC_ERROR_BAD_EXPORT_ALGORITHM, (SEC_ERROR_BASE + 75), -"Required algorithm is not allowed.") - -ER3(SEC_ERROR_EXPORTING_CERTIFICATES, (SEC_ERROR_BASE + 76), -"Error attempting to export certificates.") - -ER3(SEC_ERROR_IMPORTING_CERTIFICATES, (SEC_ERROR_BASE + 77), -"Error attempting to import certificates.") - -ER3(SEC_ERROR_PKCS12_DECODING_PFX, (SEC_ERROR_BASE + 78), -"Unable to import. Decoding error. File not valid.") - -ER3(SEC_ERROR_PKCS12_INVALID_MAC, (SEC_ERROR_BASE + 79), -"Unable to import. Invalid MAC. Incorrect password or corrupt file.") - -ER3(SEC_ERROR_PKCS12_UNSUPPORTED_MAC_ALGORITHM, (SEC_ERROR_BASE + 80), -"Unable to import. MAC algorithm not supported.") - -ER3(SEC_ERROR_PKCS12_UNSUPPORTED_TRANSPORT_MODE,(SEC_ERROR_BASE + 81), -"Unable to import. Only password integrity and privacy modes supported.") - -ER3(SEC_ERROR_PKCS12_CORRUPT_PFX_STRUCTURE, (SEC_ERROR_BASE + 82), -"Unable to import. File structure is corrupt.") - -ER3(SEC_ERROR_PKCS12_UNSUPPORTED_PBE_ALGORITHM, (SEC_ERROR_BASE + 83), -"Unable to import. Encryption algorithm not supported.") - -ER3(SEC_ERROR_PKCS12_UNSUPPORTED_VERSION, (SEC_ERROR_BASE + 84), -"Unable to import. File version not supported.") - -ER3(SEC_ERROR_PKCS12_PRIVACY_PASSWORD_INCORRECT,(SEC_ERROR_BASE + 85), -"Unable to import. Incorrect privacy password.") - -ER3(SEC_ERROR_PKCS12_CERT_COLLISION, (SEC_ERROR_BASE + 86), -"Unable to import. Same nickname already exists in database.") - -ER3(SEC_ERROR_USER_CANCELLED, (SEC_ERROR_BASE + 87), -"The user pressed cancel.") - -ER3(SEC_ERROR_PKCS12_DUPLICATE_DATA, (SEC_ERROR_BASE + 88), -"Not imported, already in database.") - -ER3(SEC_ERROR_MESSAGE_SEND_ABORTED, (SEC_ERROR_BASE + 89), -"Message not sent.") - -ER3(SEC_ERROR_INADEQUATE_KEY_USAGE, (SEC_ERROR_BASE + 90), -"Certificate key usage inadequate for attempted operation.") - -ER3(SEC_ERROR_INADEQUATE_CERT_TYPE, (SEC_ERROR_BASE + 91), -"Certificate type not approved for application.") - -ER3(SEC_ERROR_CERT_ADDR_MISMATCH, (SEC_ERROR_BASE + 92), -"Address in signing certificate does not match address in message headers.") - -ER3(SEC_ERROR_PKCS12_UNABLE_TO_IMPORT_KEY, (SEC_ERROR_BASE + 93), -"Unable to import. Error attempting to import private key.") - -ER3(SEC_ERROR_PKCS12_IMPORTING_CERT_CHAIN, (SEC_ERROR_BASE + 94), -"Unable to import. Error attempting to import certificate chain.") - -ER3(SEC_ERROR_PKCS12_UNABLE_TO_LOCATE_OBJECT_BY_NAME, (SEC_ERROR_BASE + 95), -"Unable to export. Unable to locate certificate or key by nickname.") - -ER3(SEC_ERROR_PKCS12_UNABLE_TO_EXPORT_KEY, (SEC_ERROR_BASE + 96), -"Unable to export. Private Key could not be located and exported.") - -ER3(SEC_ERROR_PKCS12_UNABLE_TO_WRITE, (SEC_ERROR_BASE + 97), -"Unable to export. Unable to write the export file.") - -ER3(SEC_ERROR_PKCS12_UNABLE_TO_READ, (SEC_ERROR_BASE + 98), -"Unable to import. Unable to read the import file.") - -ER3(SEC_ERROR_PKCS12_KEY_DATABASE_NOT_INITIALIZED, (SEC_ERROR_BASE + 99), -"Unable to export. Key database corrupt or deleted.") - -ER3(SEC_ERROR_KEYGEN_FAIL, (SEC_ERROR_BASE + 100), -"Unable to generate public/private key pair.") - -ER3(SEC_ERROR_INVALID_PASSWORD, (SEC_ERROR_BASE + 101), -"Password entered is invalid. Please pick a different one.") - -ER3(SEC_ERROR_RETRY_OLD_PASSWORD, (SEC_ERROR_BASE + 102), -"Old password entered incorrectly. Please try again.") - -ER3(SEC_ERROR_BAD_NICKNAME, (SEC_ERROR_BASE + 103), -"Certificate nickname already in use.") - -ER3(SEC_ERROR_NOT_FORTEZZA_ISSUER, (SEC_ERROR_BASE + 104), -"Peer FORTEZZA chain has a non-FORTEZZA Certificate.") - -/* ER3(SEC_ERROR_UNKNOWN, (SEC_ERROR_BASE + 105), */ - -ER3(SEC_ERROR_JS_INVALID_MODULE_NAME, (SEC_ERROR_BASE + 106), -"Invalid module name.") - -ER3(SEC_ERROR_JS_INVALID_DLL, (SEC_ERROR_BASE + 107), -"Invalid module path/filename") - -ER3(SEC_ERROR_JS_ADD_MOD_FAILURE, (SEC_ERROR_BASE + 108), -"Unable to add module") - -ER3(SEC_ERROR_JS_DEL_MOD_FAILURE, (SEC_ERROR_BASE + 109), -"Unable to delete module") - -ER3(SEC_ERROR_OLD_KRL, (SEC_ERROR_BASE + 110), -"New KRL is not later than the current one.") - -ER3(SEC_ERROR_CKL_CONFLICT, (SEC_ERROR_BASE + 111), -"New CKL has different issuer than current CKL. Delete current CKL.") - -ER3(SEC_ERROR_CERT_NOT_IN_NAME_SPACE, (SEC_ERROR_BASE + 112), -"The Certifying Authority for this certificate is not permitted to issue a \ -certificate with this name.") - -ER3(SEC_ERROR_KRL_NOT_YET_VALID, (SEC_ERROR_BASE + 113), -"The key revocation list for this certificate is not yet valid.") - -ER3(SEC_ERROR_CRL_NOT_YET_VALID, (SEC_ERROR_BASE + 114), -"The certificate revocation list for this certificate is not yet valid.") - -ER3(SEC_ERROR_UNKNOWN_CERT, (SEC_ERROR_BASE + 115), -"The requested certificate could not be found.") - -ER3(SEC_ERROR_UNKNOWN_SIGNER, (SEC_ERROR_BASE + 116), -"The signer's certificate could not be found.") - -ER3(SEC_ERROR_CERT_BAD_ACCESS_LOCATION, (SEC_ERROR_BASE + 117), -"The location for the certificate status server has invalid format.") - -ER3(SEC_ERROR_OCSP_UNKNOWN_RESPONSE_TYPE, (SEC_ERROR_BASE + 118), -"The OCSP response cannot be fully decoded; it is of an unknown type.") - -ER3(SEC_ERROR_OCSP_BAD_HTTP_RESPONSE, (SEC_ERROR_BASE + 119), -"The OCSP server returned unexpected/invalid HTTP data.") - -ER3(SEC_ERROR_OCSP_MALFORMED_REQUEST, (SEC_ERROR_BASE + 120), -"The OCSP server found the request to be corrupted or improperly formed.") - -ER3(SEC_ERROR_OCSP_SERVER_ERROR, (SEC_ERROR_BASE + 121), -"The OCSP server experienced an internal error.") - -ER3(SEC_ERROR_OCSP_TRY_SERVER_LATER, (SEC_ERROR_BASE + 122), -"The OCSP server suggests trying again later.") - -ER3(SEC_ERROR_OCSP_REQUEST_NEEDS_SIG, (SEC_ERROR_BASE + 123), -"The OCSP server requires a signature on this request.") - -ER3(SEC_ERROR_OCSP_UNAUTHORIZED_REQUEST, (SEC_ERROR_BASE + 124), -"The OCSP server has refused this request as unauthorized.") - -ER3(SEC_ERROR_OCSP_UNKNOWN_RESPONSE_STATUS, (SEC_ERROR_BASE + 125), -"The OCSP server returned an unrecognizable status.") - -ER3(SEC_ERROR_OCSP_UNKNOWN_CERT, (SEC_ERROR_BASE + 126), -"The OCSP server has no status for the certificate.") - -ER3(SEC_ERROR_OCSP_NOT_ENABLED, (SEC_ERROR_BASE + 127), -"You must enable OCSP before performing this operation.") - -ER3(SEC_ERROR_OCSP_NO_DEFAULT_RESPONDER, (SEC_ERROR_BASE + 128), -"You must set the OCSP default responder before performing this operation.") - -ER3(SEC_ERROR_OCSP_MALFORMED_RESPONSE, (SEC_ERROR_BASE + 129), -"The response from the OCSP server was corrupted or improperly formed.") - -ER3(SEC_ERROR_OCSP_UNAUTHORIZED_RESPONSE, (SEC_ERROR_BASE + 130), -"The signer of the OCSP response is not authorized to give status for \ -this certificate.") - -ER3(SEC_ERROR_OCSP_FUTURE_RESPONSE, (SEC_ERROR_BASE + 131), -"The OCSP response is not yet valid (contains a date in the future).") - -ER3(SEC_ERROR_OCSP_OLD_RESPONSE, (SEC_ERROR_BASE + 132), -"The OCSP response contains out-of-date information.") diff --git a/mozilla/security/nss/cmd/SSLsample/SSLerrs.h b/mozilla/security/nss/cmd/SSLsample/SSLerrs.h deleted file mode 100644 index 85c8c9def4d..00000000000 --- a/mozilla/security/nss/cmd/SSLsample/SSLerrs.h +++ /dev/null @@ -1,386 +0,0 @@ -/* ***** BEGIN LICENSE BLOCK ***** - * Version: MPL 1.1/GPL 2.0/LGPL 2.1 - * - * The contents of this file are subject to the Mozilla Public License Version - * 1.1 (the "License"); you may not use this file except in compliance with - * the License. You may obtain a copy of the License at - * http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" basis, - * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License - * for the specific language governing rights and limitations under the - * License. - * - * The Original Code is the Netscape security libraries. - * - * The Initial Developer of the Original Code is - * Netscape Communications Corporation. - * Portions created by the Initial Developer are Copyright (C) 1994-2000 - * the Initial Developer. All Rights Reserved. - * - * Contributor(s): - * - * Alternatively, the contents of this file may be used under the terms of - * either the GNU General Public License Version 2 or later (the "GPL"), or - * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), - * in which case the provisions of the GPL or the LGPL are applicable instead - * of those above. If you wish to allow use of your version of this file only - * under the terms of either the GPL or the LGPL, and not to allow others to - * use your version of this file under the terms of the MPL, indicate your - * decision by deleting the provisions above and replace them with the notice - * and other provisions required by the GPL or the LGPL. If you do not delete - * the provisions above, a recipient may use your version of this file under - * the terms of any one of the MPL, the GPL or the LGPL. - * - * ***** END LICENSE BLOCK ***** */ - -/* SSL-specific security error codes */ -/* caller must include "sslerr.h" */ - -ER3(SSL_ERROR_EXPORT_ONLY_SERVER, SSL_ERROR_BASE + 0, -"Unable to communicate securely. Peer does not support high-grade encryption.") - -ER3(SSL_ERROR_US_ONLY_SERVER, SSL_ERROR_BASE + 1, -"Unable to communicate securely. Peer requires high-grade encryption which is not supported.") - -ER3(SSL_ERROR_NO_CYPHER_OVERLAP, SSL_ERROR_BASE + 2, -"Cannot communicate securely with peer: no common encryption algorithm(s).") - -ER3(SSL_ERROR_NO_CERTIFICATE, SSL_ERROR_BASE + 3, -"Unable to find the certificate or key necessary for authentication.") - -ER3(SSL_ERROR_BAD_CERTIFICATE, SSL_ERROR_BASE + 4, -"Unable to communicate securely with peer: peers's certificate was rejected.") - -/* unused (SSL_ERROR_BASE + 5),*/ - -ER3(SSL_ERROR_BAD_CLIENT, SSL_ERROR_BASE + 6, -"The server has encountered bad data from the client.") - -ER3(SSL_ERROR_BAD_SERVER, SSL_ERROR_BASE + 7, -"The client has encountered bad data from the server.") - -ER3(SSL_ERROR_UNSUPPORTED_CERTIFICATE_TYPE, SSL_ERROR_BASE + 8, -"Unsupported certificate type.") - -ER3(SSL_ERROR_UNSUPPORTED_VERSION, SSL_ERROR_BASE + 9, -"Peer using unsupported version of security protocol.") - -/* unused (SSL_ERROR_BASE + 10),*/ - -ER3(SSL_ERROR_WRONG_CERTIFICATE, SSL_ERROR_BASE + 11, -"Client authentication failed: private key in key database does not match public key in certificate database.") - -ER3(SSL_ERROR_BAD_CERT_DOMAIN, SSL_ERROR_BASE + 12, -"Unable to communicate securely with peer: requested domain name does not match the server's certificate.") - -/* SSL_ERROR_POST_WARNING (SSL_ERROR_BASE + 13), - defined in sslerr.h -*/ - -ER3(SSL_ERROR_SSL2_DISABLED, (SSL_ERROR_BASE + 14), -"Peer only supports SSL version 2, which is locally disabled.") - - -ER3(SSL_ERROR_BAD_MAC_READ, (SSL_ERROR_BASE + 15), -"SSL received a record with an incorrect Message Authentication Code.") - -ER3(SSL_ERROR_BAD_MAC_ALERT, (SSL_ERROR_BASE + 16), -"SSL peer reports incorrect Message Authentication Code.") - -ER3(SSL_ERROR_BAD_CERT_ALERT, (SSL_ERROR_BASE + 17), -"SSL peer cannot verify your certificate.") - -ER3(SSL_ERROR_REVOKED_CERT_ALERT, (SSL_ERROR_BASE + 18), -"SSL peer rejected your certificate as revoked.") - -ER3(SSL_ERROR_EXPIRED_CERT_ALERT, (SSL_ERROR_BASE + 19), -"SSL peer rejected your certificate as expired.") - -ER3(SSL_ERROR_SSL_DISABLED, (SSL_ERROR_BASE + 20), -"Cannot connect: SSL is disabled.") - -ER3(SSL_ERROR_FORTEZZA_PQG, (SSL_ERROR_BASE + 21), -"Cannot connect: SSL peer is in another FORTEZZA domain.") - - -ER3(SSL_ERROR_UNKNOWN_CIPHER_SUITE , (SSL_ERROR_BASE + 22), -"An unknown SSL cipher suite has been requested.") - -ER3(SSL_ERROR_NO_CIPHERS_SUPPORTED , (SSL_ERROR_BASE + 23), -"No cipher suites are present and enabled in this program.") - -ER3(SSL_ERROR_BAD_BLOCK_PADDING , (SSL_ERROR_BASE + 24), -"SSL received a record with bad block padding.") - -ER3(SSL_ERROR_RX_RECORD_TOO_LONG , (SSL_ERROR_BASE + 25), -"SSL received a record that exceeded the maximum permissible length.") - -ER3(SSL_ERROR_TX_RECORD_TOO_LONG , (SSL_ERROR_BASE + 26), -"SSL attempted to send a record that exceeded the maximum permissible length.") - -/* - * Received a malformed (too long or short or invalid content) SSL handshake. - */ -ER3(SSL_ERROR_RX_MALFORMED_HELLO_REQUEST , (SSL_ERROR_BASE + 27), -"SSL received a malformed Hello Request handshake message.") - -ER3(SSL_ERROR_RX_MALFORMED_CLIENT_HELLO , (SSL_ERROR_BASE + 28), -"SSL received a malformed Client Hello handshake message.") - -ER3(SSL_ERROR_RX_MALFORMED_SERVER_HELLO , (SSL_ERROR_BASE + 29), -"SSL received a malformed Server Hello handshake message.") - -ER3(SSL_ERROR_RX_MALFORMED_CERTIFICATE , (SSL_ERROR_BASE + 30), -"SSL received a malformed Certificate handshake message.") - -ER3(SSL_ERROR_RX_MALFORMED_SERVER_KEY_EXCH , (SSL_ERROR_BASE + 31), -"SSL received a malformed Server Key Exchange handshake message.") - -ER3(SSL_ERROR_RX_MALFORMED_CERT_REQUEST , (SSL_ERROR_BASE + 32), -"SSL received a malformed Certificate Request handshake message.") - -ER3(SSL_ERROR_RX_MALFORMED_HELLO_DONE , (SSL_ERROR_BASE + 33), -"SSL received a malformed Server Hello Done handshake message.") - -ER3(SSL_ERROR_RX_MALFORMED_CERT_VERIFY , (SSL_ERROR_BASE + 34), -"SSL received a malformed Certificate Verify handshake message.") - -ER3(SSL_ERROR_RX_MALFORMED_CLIENT_KEY_EXCH , (SSL_ERROR_BASE + 35), -"SSL received a malformed Client Key Exchange handshake message.") - -ER3(SSL_ERROR_RX_MALFORMED_FINISHED , (SSL_ERROR_BASE + 36), -"SSL received a malformed Finished handshake message.") - -/* - * Received a malformed (too long or short) SSL record. - */ -ER3(SSL_ERROR_RX_MALFORMED_CHANGE_CIPHER , (SSL_ERROR_BASE + 37), -"SSL received a malformed Change Cipher Spec record.") - -ER3(SSL_ERROR_RX_MALFORMED_ALERT , (SSL_ERROR_BASE + 38), -"SSL received a malformed Alert record.") - -ER3(SSL_ERROR_RX_MALFORMED_HANDSHAKE , (SSL_ERROR_BASE + 39), -"SSL received a malformed Handshake record.") - -ER3(SSL_ERROR_RX_MALFORMED_APPLICATION_DATA , (SSL_ERROR_BASE + 40), -"SSL received a malformed Application Data record.") - -/* - * Received an SSL handshake that was inappropriate for the state we're in. - * E.g. Server received message from server, or wrong state in state machine. - */ -ER3(SSL_ERROR_RX_UNEXPECTED_HELLO_REQUEST , (SSL_ERROR_BASE + 41), -"SSL received an unexpected Hello Request handshake message.") - -ER3(SSL_ERROR_RX_UNEXPECTED_CLIENT_HELLO , (SSL_ERROR_BASE + 42), -"SSL received an unexpected Client Hello handshake message.") - -ER3(SSL_ERROR_RX_UNEXPECTED_SERVER_HELLO , (SSL_ERROR_BASE + 43), -"SSL received an unexpected Server Hello handshake message.") - -ER3(SSL_ERROR_RX_UNEXPECTED_CERTIFICATE , (SSL_ERROR_BASE + 44), -"SSL received an unexpected Certificate handshake message.") - -ER3(SSL_ERROR_RX_UNEXPECTED_SERVER_KEY_EXCH , (SSL_ERROR_BASE + 45), -"SSL received an unexpected Server Key Exchange handshake message.") - -ER3(SSL_ERROR_RX_UNEXPECTED_CERT_REQUEST , (SSL_ERROR_BASE + 46), -"SSL received an unexpected Certificate Request handshake message.") - -ER3(SSL_ERROR_RX_UNEXPECTED_HELLO_DONE , (SSL_ERROR_BASE + 47), -"SSL received an unexpected Server Hello Done handshake message.") - -ER3(SSL_ERROR_RX_UNEXPECTED_CERT_VERIFY , (SSL_ERROR_BASE + 48), -"SSL received an unexpected Certificate Verify handshake message.") - -ER3(SSL_ERROR_RX_UNEXPECTED_CLIENT_KEY_EXCH , (SSL_ERROR_BASE + 49), -"SSL received an unexpected Cllient Key Exchange handshake message.") - -ER3(SSL_ERROR_RX_UNEXPECTED_FINISHED , (SSL_ERROR_BASE + 50), -"SSL received an unexpected Finished handshake message.") - -/* - * Received an SSL record that was inappropriate for the state we're in. - */ -ER3(SSL_ERROR_RX_UNEXPECTED_CHANGE_CIPHER , (SSL_ERROR_BASE + 51), -"SSL received an unexpected Change Cipher Spec record.") - -ER3(SSL_ERROR_RX_UNEXPECTED_ALERT , (SSL_ERROR_BASE + 52), -"SSL received an unexpected Alert record.") - -ER3(SSL_ERROR_RX_UNEXPECTED_HANDSHAKE , (SSL_ERROR_BASE + 53), -"SSL received an unexpected Handshake record.") - -ER3(SSL_ERROR_RX_UNEXPECTED_APPLICATION_DATA, (SSL_ERROR_BASE + 54), -"SSL received an unexpected Application Data record.") - -/* - * Received record/message with unknown discriminant. - */ -ER3(SSL_ERROR_RX_UNKNOWN_RECORD_TYPE , (SSL_ERROR_BASE + 55), -"SSL received a record with an unknown content type.") - -ER3(SSL_ERROR_RX_UNKNOWN_HANDSHAKE , (SSL_ERROR_BASE + 56), -"SSL received a handshake message with an unknown message type.") - -ER3(SSL_ERROR_RX_UNKNOWN_ALERT , (SSL_ERROR_BASE + 57), -"SSL received an alert record with an unknown alert description.") - -/* - * Received an alert reporting what we did wrong. (more alerts above) - */ -ER3(SSL_ERROR_CLOSE_NOTIFY_ALERT , (SSL_ERROR_BASE + 58), -"SSL peer has closed this connection.") - -ER3(SSL_ERROR_HANDSHAKE_UNEXPECTED_ALERT , (SSL_ERROR_BASE + 59), -"SSL peer was not expecting a handshake message it received.") - -ER3(SSL_ERROR_DECOMPRESSION_FAILURE_ALERT , (SSL_ERROR_BASE + 60), -"SSL peer was unable to succesfully decompress an SSL record it received.") - -ER3(SSL_ERROR_HANDSHAKE_FAILURE_ALERT , (SSL_ERROR_BASE + 61), -"SSL peer was unable to negotiate an acceptable set of security parameters.") - -ER3(SSL_ERROR_ILLEGAL_PARAMETER_ALERT , (SSL_ERROR_BASE + 62), -"SSL peer rejected a handshake message for unacceptable content.") - -ER3(SSL_ERROR_UNSUPPORTED_CERT_ALERT , (SSL_ERROR_BASE + 63), -"SSL peer does not support certificates of the type it received.") - -ER3(SSL_ERROR_CERTIFICATE_UNKNOWN_ALERT , (SSL_ERROR_BASE + 64), -"SSL peer had some unspecified issue with the certificate it received.") - - -ER3(SSL_ERROR_GENERATE_RANDOM_FAILURE , (SSL_ERROR_BASE + 65), -"SSL experienced a failure of its random number generator.") - -ER3(SSL_ERROR_SIGN_HASHES_FAILURE , (SSL_ERROR_BASE + 66), -"Unable to digitally sign data required to verify your certificate.") - -ER3(SSL_ERROR_EXTRACT_PUBLIC_KEY_FAILURE , (SSL_ERROR_BASE + 67), -"SSL was unable to extract the public key from the peer's certificate.") - -ER3(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE , (SSL_ERROR_BASE + 68), -"Unspecified failure while processing SSL Server Key Exchange handshake.") - -ER3(SSL_ERROR_CLIENT_KEY_EXCHANGE_FAILURE , (SSL_ERROR_BASE + 69), -"Unspecified failure while processing SSL Client Key Exchange handshake.") - -ER3(SSL_ERROR_ENCRYPTION_FAILURE , (SSL_ERROR_BASE + 70), -"Bulk data encryption algorithm failed in selected cipher suite.") - -ER3(SSL_ERROR_DECRYPTION_FAILURE , (SSL_ERROR_BASE + 71), -"Bulk data decryption algorithm failed in selected cipher suite.") - -ER3(SSL_ERROR_SOCKET_WRITE_FAILURE , (SSL_ERROR_BASE + 72), -"Attempt to write encrypted data to underlying socket failed.") - -ER3(SSL_ERROR_MD5_DIGEST_FAILURE , (SSL_ERROR_BASE + 73), -"MD5 digest function failed.") - -ER3(SSL_ERROR_SHA_DIGEST_FAILURE , (SSL_ERROR_BASE + 74), -"SHA-1 digest function failed.") - -ER3(SSL_ERROR_MAC_COMPUTATION_FAILURE , (SSL_ERROR_BASE + 75), -"MAC computation failed.") - -ER3(SSL_ERROR_SYM_KEY_CONTEXT_FAILURE , (SSL_ERROR_BASE + 76), -"Failure to create Symmetric Key context.") - -ER3(SSL_ERROR_SYM_KEY_UNWRAP_FAILURE , (SSL_ERROR_BASE + 77), -"Failure to unwrap the Symmetric key in Client Key Exchange message.") - -ER3(SSL_ERROR_PUB_KEY_SIZE_LIMIT_EXCEEDED , (SSL_ERROR_BASE + 78), -"SSL Server attempted to use domestic-grade public key with export cipher suite.") - -ER3(SSL_ERROR_IV_PARAM_FAILURE , (SSL_ERROR_BASE + 79), -"PKCS11 code failed to translate an IV into a param.") - -ER3(SSL_ERROR_INIT_CIPHER_SUITE_FAILURE , (SSL_ERROR_BASE + 80), -"Failed to initialize the selected cipher suite.") - -ER3(SSL_ERROR_SESSION_KEY_GEN_FAILURE , (SSL_ERROR_BASE + 81), -"Client failed to generate session keys for SSL session.") - -ER3(SSL_ERROR_NO_SERVER_KEY_FOR_ALG , (SSL_ERROR_BASE + 82), -"Server has no key for the attempted key exchange algorithm.") - -ER3(SSL_ERROR_TOKEN_INSERTION_REMOVAL , (SSL_ERROR_BASE + 83), -"PKCS#11 token was inserted or removed while operation was in progress.") - -ER3(SSL_ERROR_TOKEN_SLOT_NOT_FOUND , (SSL_ERROR_BASE + 84), -"No PKCS#11 token could be found to do a required operation.") - -ER3(SSL_ERROR_NO_COMPRESSION_OVERLAP , (SSL_ERROR_BASE + 85), -"Cannot communicate securely with peer: no common compression algorithm(s).") - -ER3(SSL_ERROR_HANDSHAKE_NOT_COMPLETED , (SSL_ERROR_BASE + 86), -"Cannot initiate another SSL handshake until current handshake is complete.") - -ER3(SSL_ERROR_BAD_HANDSHAKE_HASH_VALUE , (SSL_ERROR_BASE + 87), -"Received incorrect handshakes hash values from peer.") - -ER3(SSL_ERROR_CERT_KEA_MISMATCH , (SSL_ERROR_BASE + 88), -"The certificate provided cannot be used with the selected key exchange algorithm.") - -ER3(SSL_ERROR_NO_TRUSTED_SSL_CLIENT_CA , (SSL_ERROR_BASE + 89), -"No certificate authority is trusted for SSL client authentication.") - -ER3(SSL_ERROR_SESSION_NOT_FOUND , (SSL_ERROR_BASE + 90), -"Client's SSL session ID not found in server's session cache.") - -ER3(SSL_ERROR_DECRYPTION_FAILED_ALERT , (SSL_ERROR_BASE + 91), -"Peer was unable to decrypt an SSL record it received.") - -ER3(SSL_ERROR_RECORD_OVERFLOW_ALERT , (SSL_ERROR_BASE + 92), -"Peer received an SSL record that was longer than is permitted.") - -ER3(SSL_ERROR_UNKNOWN_CA_ALERT , (SSL_ERROR_BASE + 93), -"Peer does not recognize and trust the CA that issued your certificate.") - -ER3(SSL_ERROR_ACCESS_DENIED_ALERT , (SSL_ERROR_BASE + 94), -"Peer received a valid certificate, but access was denied.") - -ER3(SSL_ERROR_DECODE_ERROR_ALERT , (SSL_ERROR_BASE + 95), -"Peer could not decode an SSL handshake message.") - -ER3(SSL_ERROR_DECRYPT_ERROR_ALERT , (SSL_ERROR_BASE + 96), -"Peer reports failure of signature verification or key exchange.") - -ER3(SSL_ERROR_EXPORT_RESTRICTION_ALERT , (SSL_ERROR_BASE + 97), -"Peer reports negotiation not in compliance with export regulations.") - -ER3(SSL_ERROR_PROTOCOL_VERSION_ALERT , (SSL_ERROR_BASE + 98), -"Peer reports incompatible or unsupported protocol version.") - -ER3(SSL_ERROR_INSUFFICIENT_SECURITY_ALERT , (SSL_ERROR_BASE + 99), -"Server requires ciphers more secure than those supported by client.") - -ER3(SSL_ERROR_INTERNAL_ERROR_ALERT , (SSL_ERROR_BASE + 100), -"Peer reports it experienced an internal error.") - -ER3(SSL_ERROR_USER_CANCELED_ALERT , (SSL_ERROR_BASE + 101), -"Peer user canceled handshake.") - -ER3(SSL_ERROR_NO_RENEGOTIATION_ALERT , (SSL_ERROR_BASE + 102), -"Peer does not permit renegotiation of SSL security parameters.") - -ER3(SSL_ERROR_SERVER_CACHE_NOT_CONFIGURED , (SSL_ERROR_BASE + 103), -"SSL server cache not configured and not disabled for this socket.") - -ER3(SSL_ERROR_UNSUPPORTED_EXTENSION_ALERT , (SSL_ERROR_BASE + 104), -"SSL peer does not support requested TLS hello extension.") - -ER3(SSL_ERROR_CERTIFICATE_UNOBTAINABLE_ALERT , (SSL_ERROR_BASE + 105), -"SSL peer could not obtain your certificate from the supplied URL.") - -ER3(SSL_ERROR_UNRECOGNIZED_NAME_ALERT , (SSL_ERROR_BASE + 106), -"SSL peer has no certificate for the requested DNS name.") - -ER3(SSL_ERROR_BAD_CERT_STATUS_RESPONSE_ALERT , (SSL_ERROR_BASE + 107), -"SSL peer was unable to get an OCSP response for its certificate.") - -ER3(SSL_ERROR_BAD_CERT_HASH_VALUE_ALERT , (SSL_ERROR_BASE + 108), -"SSL peer reported bad certificate hash value.") diff --git a/mozilla/security/nss/cmd/SSLsample/client.mn b/mozilla/security/nss/cmd/SSLsample/client.mn index 4ede63e2dc3..064b7750ffa 100644 --- a/mozilla/security/nss/cmd/SSLsample/client.mn +++ b/mozilla/security/nss/cmd/SSLsample/client.mn @@ -46,9 +46,5 @@ CSRCS = client.c \ PROGRAM = client -REQUIRES = dbm - IMPORTS = nss/lib/nss -DEFINES = -DNSPR20 - diff --git a/mozilla/security/nss/cmd/SSLsample/server.mn b/mozilla/security/nss/cmd/SSLsample/server.mn index 50ec860c7fd..2c29b587b20 100644 --- a/mozilla/security/nss/cmd/SSLsample/server.mn +++ b/mozilla/security/nss/cmd/SSLsample/server.mn @@ -46,7 +46,3 @@ CSRCS = server.c \ PROGRAM = server -REQUIRES = dbm - -DEFINES = -DNSPR20 - diff --git a/mozilla/security/nss/cmd/lib/manifest.mn b/mozilla/security/nss/cmd/lib/manifest.mn index 18086156b35..d9829c9776f 100644 --- a/mozilla/security/nss/cmd/lib/manifest.mn +++ b/mozilla/security/nss/cmd/lib/manifest.mn @@ -44,6 +44,9 @@ MODULE = nss DEFINES = -DNSPR20 PRIVATE_EXPORTS = secutil.h \ + NSPRerrs.h \ + SECerrs.h \ + SSLerrs.h \ $(NULL) CSRCS = secutil.c \