TheHomecraft/cc-mek-scada
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

#403 spelling fixes

Browse Source
This commit is contained in:
Mikayla 2025-09-02 14:17:43 +00:00
parent 2cee1ea895
commit 4bc5af46ab
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
pocket/ui/docs.lua
View File

@ -150,7 +150,7 @@ doc("ReactorSCRAM", "Reactor SCRAM", "On if the reactor protection system is hol
doc("ManualReactorSCRAM", "Manual Reactor SCRAM", "On if the operator (you) initiated a SCRAM.")
doc("AutoReactorSCRAM", "Auto Reactor SCRAM", "On if the automatic control system initiated a SCRAM. The main view screen annunciator will have an indication as to why.")
doc("RadiationWarning", "Radiation Warning", "On if radiation levels are above normal. There is likely a leak somewhere, so that should be identified and fixed. Hazmat suit recommended.")
doc("RCPTrip", "RCP Trip", "Reactor coolant pump tripped. This is a technical concept not directly mapping to Mekansim. Here, it indicates if there is either high heated coolant or low cooled coolant that caused an RPS trip. Check the coolant system if this occurs.")
doc("RCPTrip", "RCP Trip", "Reactor coolant pump tripped. This is a technical concept not directly mapping to Mekanism. Here, it indicates if there is either high heated coolant or low cooled coolant that caused an RPS trip. Check the coolant system if this occurs.")
doc("RCSFlowLow", "RCS Flow Low", "Indicates if the reactor coolant system flow is low. This is observed when the cooled coolant level in the reactor is dropping. This can occur while a turbine spins up, but if it persists, check that the cooling system is operating properly. This can occur with smaller boilers or when using pipes and not having enough.")
doc("CoolantLevelLow", "Coolant Level Low", "On if the reactor coolant level is lower than it should be. Check the coolant system.")
doc("ReactorTempHigh", "Reactor Temp. High", "On if the reactor temperature is above expected maximum operating temperature. This is not yet damaging, but should be attended to. Check coolant system.")
@ -230,7 +230,7 @@ sect("Automatic Control")
text("This interface is used for managing automatic facility control, which only applies to units set via the unit display to be under auto control. This includes setpoints, status, configuration, and control.")
doc("ui_fac_auto_bt", "Burn Target", "When set to Combined Burn Rate mode, assigned units will ramp up to meet this combined target.")
doc("ui_fac_auto_ct", "Charge Target", "When set to Charge Level mode, assigned units will run to reach and maintain this induction matrix charge level.")
doc("ui_fac_auto_gt", "Gen. Target", "When set to Generation Rate mode, assigned units will run to reach and maintain this continous power output, using the induction matrix input rate.")
doc("ui_fac_auto_gt", "Gen. Target", "When set to Generation Rate mode, assigned units will run to reach and maintain this continuous power output, using the induction matrix input rate.")
doc("ui_fac_save", "SAVE", "This saves your configuration without starting control.")
doc("ui_fac_start", "START", "This starts the configured automatic control.")
tip("START also includes the SAVE operation.")
@ -271,10 +271,10 @@ doc("ui_flow_prv", "PRVs", "Pressure Relief Valves (PRVs) are used to show the t
list(DOC_LIST_TYPE.LED, { "Not Dumping", "Dumping Excess", "Dumping" }, { colors.gray, colors.yellow, colors.red })
sect("SNAs")
text("Solar Neutron Activators are shown on the flow diagram as a combined block due to the large variable count supported.")
tip("SNAs consume 10x the waste as they procuce in antimatter, so take that into account before connecting too many SNAs.")
tip("SNAs consume 10x the waste as they produce in antimatter, so take that into account before connecting too many SNAs.")
doc("ui_flow_sna_act", "ACTIVE", "The SNAs have a non-zero total flow.")
doc("ui_flow_sna_cnt", "CNT", "The count of SNAs assigned to the unit.")
doc("ui_flow_sna_peak_o", "PEAK\x1a", "The combined theoretical peak output the SNAs can achive under full sunlight.")
doc("ui_flow_sna_peak_o", "PEAK\x1a", "The combined theoretical peak output the SNAs can achieve under full sunlight.")
doc("ui_flow_sna_max_o", "MAX \x1a", "The current combined maximum output rate of the SNAs (based on current sunlight).")
doc("ui_flow_sna_max_i", "\x1aMAX", "The computed combined maximum input rate (10x the output rate).")
doc("ui_flow_sna_in", "\x1aIN", "The current input rate into the SNAs.")