From 41ae9a4ac39a17866cc4ef1223b3b76423ce1f23 Mon Sep 17 00:00:00 2001 From: Mikayla Date: Wed, 1 Mar 2023 12:59:13 -0500 Subject: [PATCH] Updated Operating Procedure (markdown) --- Operating-Procedure.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Operating-Procedure.md b/Operating-Procedure.md index 49238df..7fa8ae9 100644 --- a/Operating-Procedure.md +++ b/Operating-Procedure.md @@ -10,10 +10,12 @@ There are 4 main button controls in addition to the burn rate spinbox control. T While the reactor auto control mode is set to "Manual", the burn rate can be changed via the up/down arrows. The rate is not set until the SET button is pressed. If this succeeds, you will see the "Commanded Burn Rate" show the new rate. If the reactor is active, the "Burn Rate" should also show this rate. -### Starting the Reactor +### Starting and Stopping the Reactor The RPS is tripped via either manual SCRAM with the SCRAM button or a detected safety issue. Before starting, the RPS needs to be reset using the red RESET button. If the hazard condition is still present, it will trip again. While it is tripped, the START button will be disabled. Once everything is all set and the reactor auto control mode is set to "Manual", then the START button will be enabled, turning blue. Once started, that button will again be disabled. +To stop the reactor manually, press the SCRAM button. This will trip the RPS, stopping reactor operation. The "Manual Operator SCRAM" indicator will light up on the reactor annunciator panel. + ## Alarm Panel image