From 48422bc2dcb07c7d62d6a6d29fd46f7fedc91fc0 Mon Sep 17 00:00:00 2001 From: Mikayla Date: Wed, 1 Mar 2023 12:51:09 -0500 Subject: [PATCH] Updated Quickstart (markdown) --- Quickstart.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Quickstart.md b/Quickstart.md index adb1455..fcaf7e7 100644 --- a/Quickstart.md +++ b/Quickstart.md @@ -4,7 +4,7 @@ Was the setup too long and you didn't want to read it? The installer can be downloaded using `wget https://raw.githubusercontent.com/MikaylaFischler/cc-mek-scada/main/ccmsi.lua` from GitHub and I will likely add a link for pastebin to the README or in the wiki. The installer help `ccmsi help` should give you the information you need to install the applications. -The config files are intended to be self-documenting, so you can probably figure them out. You still should probably check out the section on the [RTU config](https://github.com/MikaylaFischler/cc-mek-scada/wiki/System-Setup#rtu-configuration) though. +The config files are intended to be self-documenting, so you can likely figure them out. You still should probably check out the section on the [RTU config](https://github.com/MikaylaFischler/cc-mek-scada/wiki/System-Setup#rtu-configuration) though. Remember you can only have one coordinator and one supervisor in any given facility system, with a maximum of 4 reactor units (each with no more than 2 boilers and no more than 3 turbines).