From 9d2a6b53a7ef39d8dcc4194adddd9a4553c03fce Mon Sep 17 00:00:00 2001 From: Mikayla Date: Fri, 25 Aug 2023 09:49:52 -0400 Subject: [PATCH] Updated Quickstart (markdown) --- Quickstart.md | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Quickstart.md b/Quickstart.md index 6e6af74..bb6ea49 100644 --- a/Quickstart.md +++ b/Quickstart.md @@ -6,9 +6,11 @@ Was the setup too long and you didn't want to read it? 2. The config files are intended to be self-documenting, so you can likely figure them out. You still should probably check out the section on the [RTU config](https://github.com/MikaylaFischler/cc-mek-scada/wiki/System-Setup#rtu-configuration) though. -3. Remember you can only have one coordinator and one supervisor in any given facility system, with a maximum of 4 reactor units (each with no more than 2 boilers and no more than 3 turbines). +3. Once everything has been configured, the system can be started up and everything will connect if configured correctly. -I've made a basic setup/usage guide video for the beta software, which can be found here: +Remember you can only have one coordinator and one supervisor in any given facility system, with a maximum of 4 reactor units (each with no more than 2 boilers and no more than 3 turbines). + +I've made a basic setup/usage guide video for the beta software, which can be found linked below. Note, don't be dissuaded by the video length if you just want a quick setup, most of that is the usage part. [![Beta Setup Guide](https://img.youtube.com/vi/TaxsKxPHBao/0.jpg)](https://www.youtube.com/watch?v=TaxsKxPHBao)