This completes flakerefs using the registry (e.g. 'nix<TAB>' => 'nix
nixpkgs') and flake output attributes by evaluating the flake
(e.g. 'dwarffs#nix<TAB>' => 'dwarffs#nixosModules').
- result list will be always empty if --json is passed
- for scripts an empty search result is not really an error,
we rather want to distinguish between evaluation errors and empty results
The raw stderr output isn't logged anymore so the build logs need to be
printed by the default logger in order for the old commands like
nix-build to still show build output.
For remote stores the log messages are already forwarded as structured
STDERR_RESULT messages so the old format is duplicate information. But
still included with -vvv since it could be useful for debugging
problems.
$ nix build -L /nix/store/nl71b2niws857ffiaggyrkjwgx9jjzc0-foo.drv --store ssh-ng://localhost
Hello World!
foo> Hello World!
[1/0/1 built] building foo
Fixes#3556
When used with `readFile`, we have a pretty good heuristic of the file
size, so `reserve` this in the `string`. This will save some allocation
/ copy when the string is growing.
This means you now get an error message *before* stuff gets built:
$ nix copy .#hydraJobs.vendoredCrates
error: you must pass '--from' and/or '--to'
Try 'nix --help' for more information.
The commit 3cc1125595 adds a `grantpt`
call on the builder pseudo terminal fd. This call is actually only
required for MacOS, but it however requires a RW access to /dev/pts
which is only RO bindmounted in the Bazel Linux sandbox. So, Nix can
not be actually run in the Bazel Linux sandbox for unneeded reasons.
This closes#3026 by allowing `builtins.readFile` to read a file with a
wrongly reported file size, for example, files in `/proc` may report a
file size of 0. Reading file in `/proc` is not a good enough motivation,
however I do think it just makes nix more robust by allowing more file
to be read. Especially, I do considerer the previous behavior to be
dangerous because nix was previously reading truncated files. Examples
of file system which incorrectly report file size may be network file
system or dynamic file system (for performance reason, a dynamic file
system such as FUSE may generate the content of the file on demand).
```
nix-repl> builtins.readFile "/proc/version"
""
```
With this commit:
```
nix-repl> builtins.readFile "/proc/version"
"Linux version 5.6.7 (nixbld@localhost) (gcc version 9.3.0 (GCC)) #1-NixOS SMP Thu Apr 23 08:38:27 UTC 2020\n"
```
Here is a summary of the behavior changes:
- If the reported size is smaller, previous implementation
was silently returning a truncated file content. The new implementation
is returning the correct file content.
- If a file had a bigger reported file size, previous implementation was
failing with an exception, but the new implementation is returning the
correct file content. This change of behavior is coherent with this pull
request.
Open questions
- The behavior is unchanged for correctly reported file size, however
performances may vary because it uses the more complex sink interface.
Considering that sink is used a lot, I don't think this impacts the
performance a lot.
- `builtins.readFile` on an infinite file, such as `/dev/random` may
fill the memory.
- it does not support adding file to store, such as `${/proc/version}`.
In particular, doing 'nix build /path/to/dir' now works if
/path/to/dir is not a Git tree (it only has to contain a flake.nix
file).
Also, 'nix flake init' no longer requires a Git tree (but it will do a
'git add flake.nix' if it's a Git tree)
Suppose I have a path /nix/store/[hash]-[name]/a/a/a/a/a/[...]/a,
long enough that everything after "/nix/store/" is longer than 4096
(MAX_PATH) bytes.
Nix will happily allow such a path to be inserted into the store,
because it doesn't look at all the nested structure. It just cares
about the /nix/store/[hash]-[name] part. But, when the path is deleted,
we encounter a problem. Nix will move the path to /nix/store/trash, but
then when it's trying to recursively delete the trash directory, it will
at some point try to unlink
/nix/store/trash/[hash]-[name]/a/a/a/a/a/[...]/a. This will fail,
because the path is too long. After this has failed, any store deletion
operation will never work again, because Nix needs to delete the trash
directory before recreating it to move new things to it. (I assume this
is because otherwise a path being deleted could already exist in the
trash, and then moving it would fail.)
This means that if I can trick somebody into just fetching a tarball
containing a path of the right length, they won't be able to delete
store paths or garbage collect ever again, until the offending path is
manually removed from /nix/store/trash. (And even fixing this manually
is quite difficult if you don't understand the issue, because the
absolute path that Nix says it failed to remove is also too long for
rm(1).)
This patch fixes the issue by making Nix's recursive delete operation
use unlinkat(2). This function takes a relative path and a directory
file descriptor. We ensure that the relative path is always just the
name of the directory entry, and therefore its length will never exceed
255 bytes. This means that it will never even come close to AX_PATH,
and Nix will therefore be able to handle removing arbitrarily deep
directory hierachies.
Since the directory file descriptor is used for recursion after being
used in readDirectory, I made a variant of readDirectory that takes an
already open directory stream, to avoid the directory being opened
multiple times. As we have seen from this issue, the less we have to
interact with paths, the better, and so it's good to reuse file
descriptors where possible.
I left _deletePath as succeeding even if the parent directory doesn't
exist, even though that feels wrong to me, because without that early
return, the linux-sandbox test failed.
Reported-by: Alyssa Ross <hi@alyssa.is>
Thanks-to: Puck Meerburg <puck@puckipedia.com>
Tested-by: Puck Meerburg <puck@puckipedia.com>
Reviewed-by: Puck Meerburg <puck@puckipedia.com>
Reduces the number of store queries it performs. Also prints a warning
if any of the selectors did not match any installed derivations.
UX Caveats:
- Will print a warning that nothing matched if a previous selector
already removed the path
- Will not do anything if no selectors were provided (no change from
before).
Fixes#3531
In particular, we store whether an attribute failed to evaluate (threw
an exception) or was an unsupported type. This is to ensure that a
repeated 'nix flake show' never has to evaluate anything, so it can
execute without fetching the flake.
With this, 'nix flake show nixpkgs/nixos-20.03 --legacy' executes in
0.6s (was 3.4s).
This speeds up the creation of the cache for the nixpkgs flake from
21.2s to 10.2s. Oddly, it also speeds up querying the cache
(i.e. running 'nix flake show nixpkgs/nixos-20.03 --legacy') from 4.2s
to 3.4s.
(For comparison, running with --no-eval-cache takes 9.5s, so the
overhead of building the SQLite cache is only 0.7s.)
In the fully cached case for the 'nixpkgs' flake, it went from 101s to
4.6s. Populating the cache went from 132s to 17.4s (which could
probably be improved further by combining INSERTs).
Usually this just writes to stdout, but for ProgressBar, we need to
clear the current line, write the line to stdout, and then redraw the
progress bar.
(cherry picked from commit 696c026006)
Usually this just writes to stdout, but for ProgressBar, we need to
clear the current line, write the line to stdout, and then redraw the
progress bar.
Motivation: maintain project-level configuration files.
Document the whole situation a bit better so that it corresponds to the
implementation, and add NIX_USER_CONF_FILES that allows overriding
which user files Nix will load during startup.
Previously the memory would occasionally be collected during eval since
the GC doesn't consider the member variable as alive / doesn't scan the
region of memory where the pointer lives.
By using the traceable_allocator<T> allocator provided by Boehm GC we
can ensure the memory isn't collected. It should be properly freed when
SourceExprCommand goes out of scope.
This doesn't just cause problems for nix-store --serve but also results
in certain build failures. Builds that use unix domain sockets in their
tests often fail because the /var/folders prefix already consumes more
than half of the maximum length of socket paths.
struct sockaddr_un {
sa_family_t sun_family; /* AF_UNIX */
char sun_path[108]; /* Pathname */
};
A test case for correct handling of temporary directory deletion that
was added to check.sh as part of PR #2689 was initially disabled for
Darwin because of a directory permission issue in PR #2688.
Now that the issue in PR #2688 is fixed, this commit enables the test
case for Darwin.
Temporarily add user-write permission to build directory so that it
can be moved out of the sandbox to the store with a .check suffix.
This is necessary because the build directory has already had its
permissions set read-only, but write permission is required
to update the directory's parent link to move it out of the sandbox.
Updated the related --check "derivation may not be deterministic"
messages to consistently use the real store paths.
Added test for non-root sandbox nix-build --check -K to demonstrate
issue and help prevent regressions.
Future editions of flakes or the Nix language can be supported by
renaming flake.nix (e.g. flake-v2.nix). This avoids a bootstrap
problem where we don't know which grammar to use to parse
flake*.nix. It also allows a project to support multiple flake
editions, in theory.
With --check and the --keep-failed (-K) flag, the temporary directory
was being retained regardless of whether the build was successful and
reproducible. This removes the temporary directory, as expected, on
a reproducible check build.
Added tests to verify that temporary build directories are not
retained unnecessarily, particularly when using --check with
--keep-failed.
This fetchers copies a plain directory (i.e. not a Git/Mercurial
repository) to the store (or does nothing if the path is already a
store path).
One use case is to pin the 'nixpkgs' flake used to build the current
NixOS system, and prevent it from being garbage-collected, via a
system registry entry like this:
{
"from": {
"id": "nixpkgs",
"type": "indirect"
},
"to": {
"type": "path",
"path": "/nix/store/rralhl3wj4rdwzjn16g7d93mibvlr521-source",
"lastModified": 1585388205,
"rev": "b0c285807d6a9f1b7562ec417c24fa1a30ecc31a"
},
"exact": true
}
Note the fake "lastModified" and "rev" attributes that ensure that the
flake gives the same evaluation results as the corresponding
Git/GitHub inputs.
(cherry picked from commit 12f9379123)
This provides a pluggable mechanism for defining new fetchers. It adds
a builtin function 'fetchTree' that generalizes existing fetchers like
'fetchGit', 'fetchMercurial' and 'fetchTarball'. 'fetchTree' takes a
set of attributes, e.g.
fetchTree {
type = "git";
url = "https://example.org/repo.git";
ref = "some-branch";
rev = "abcdef...";
}
The existing fetchers are just wrappers around this. Note that the
input attributes to fetchTree are the same as flake input
specifications and flake lock file entries.
All fetchers share a common cache stored in
~/.cache/nix/fetcher-cache-v1.sqlite. This replaces the ad hoc caching
mechanisms in fetchGit and download.cc (e.g. ~/.cache/nix/{tarballs,git-revs*}).
This also adds support for Git worktrees (c169ea5904).
This is useful for finding out what a registry lookup resolves to, e.g
$ nix flake info patchelf
Resolved URL: github:NixOS/patchelf
Locked URL: github:NixOS/patchelf/cd7955af31698c571c30b7a0f78e59fd624d0229
When encountering an unsupported protocol, there's no need to retry.
Chances are, it won't suddenly be supported between retry attempts;
error instead. Otherwise, you see something like the following:
$ nix-env -i -f git://git@github.com/foo/bar
warning: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1); retrying in 335 ms
warning: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1); retrying in 604 ms
warning: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1); retrying in 1340 ms
warning: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1); retrying in 2685 ms
With this change, you now see:
$ nix-env -i -f git://git@github.com/foo/bar
error: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1)
When we do something like 'nix flake update --override-input nixpkgs
...', the override is now kept on subsequent calls. (If you don't want
this behaviour, you can use --no-write-lock-file.)
This fetchers copies a plain directory (i.e. not a Git/Mercurial
repository) to the store (or does nothing if the path is already a
store path).
One use case is to pin the 'nixpkgs' flake used to build the current
NixOS system, and prevent it from being garbage-collected, via a
system registry entry like this:
{
"from": {
"id": "nixpkgs",
"type": "indirect"
},
"to": {
"type": "path",
"path": "/nix/store/rralhl3wj4rdwzjn16g7d93mibvlr521-source",
"lastModified": 1585388205,
"rev": "b0c285807d6a9f1b7562ec417c24fa1a30ecc31a"
},
"exact": true
}
Note the fake "lastModified" and "rev" attributes that ensure that the
flake gives the same evaluation results as the corresponding
Git/GitHub inputs.
This allows querying the location of function arguments. E.g.
builtins.unsafeGetAttrPos "x" (builtins.functionArgs ({ x }: null))
=> { column = 57; file = "/home/infinisil/src/nix/inst/test.nix"; line = 1; }
An example use is for pinning the "nixpkgs" entry the system-wide
registry to a particular store path. Inexact matches
(e.g. "nixpkgs/master") should still use the global registry.
One application for this is pinning the 'nixpkgs' flake to the exact
revision used to build the NixOS system, e.g.
{
"flakes": [
{
"from": {
"id": "nixpkgs",
"type": "indirect"
},
"to": {
"owner": "NixOS",
"repo": "nixpkgs",
"type": "github",
"rev": "b0c285807d6a9f1b7562ec417c24fa1a30ecc31a"
}
}
],
"version": 2
}
Using std::filesystem means also having to link with -lstdc++fs on
some platforms and it's hard to discover for what platforms this is
needed. As all the functionality is already implemented as utilities,
use those instead.
Due to fetchGit not checking if rev is an ancestor of ref (there is even
a FIXME comment about it in the code), the cache repo might not have the
ref even though it has the rev. This doesn't matter when submodule =
false, but the submodule = true code blows up because it tries to fetch
the (missing) ref from the cache repo.
Fix this in the simplest way possible: fetch all refs from the local
cache repo when submodules = true.
TODO: Add tests.
The .link file is used as a lock, so I think we should put the
"submodule" attribute in there since turning on submodules creates a new
.link file path.
This is now done in a single pass. Also fixes some issues when
updating flakes with circular dependencies. Finally, when using
'--recreate-lock-file --commit-lock-file', the commit message now
correctly shows the differences.
The install-multi-user script uses blue, green, and red colors, as
well as bold and underline, to add helpful formatting that helps
structure its rather voluminous output.
Unfortunately, the terminal escape sequences it uses are not quite
well-formed. The relevant information is all there, just obscured
by some extra noise, a leading parameter `38`. Empirically, the
result is:
* On macOS, in both Terminal.app and iTerm2, the spurious `38` is
ignored, the rest of the escape sequence is applied, and the colors
show up as intended.
* On Linux, in at least gnome-terminal and xterm, the spurious `38`
and the next parameter after it are ignored, and what's left is
applied. So in the sequence `38;4;32`, the 4 (underline) is
ignored but the 32 (green) takes effect; in a more typical sequence
like `38;34`, the 34 (blue) is ignored and nothing happens.
These codes are all unchanged since this script's origins as a
Darwin-only script -- so the fact that they work fine in common macOS
terminals goes some way to explain how the bug arose.
Happily, we can make the colors work as intended by just deleting the
extra `38;`. Tested in all four terminals mentioned above; the new
codes work correctly on all of them, and on the two macOS terminals
they work exactly the same as before.
---
In a bit more technical detail -- perhaps more than anyone, me
included, ever wanted to know, but now that I've gone and learned it
I'll write it down anyway :) -- here's what's happening in these codes:
An ECMA-48 "control sequence" begins with `\033[` aka "CSI", contains
any number of parameters as semicolon-separated decimal numbers (plus
sometimes other wrinkles), and ends with a byte from 0x40..0x7e. In
our case, with `m` aka "SGR", "Select Graphic Rendition".
An SGR control sequence `\033[...m` sets colors, fonts, text styles,
etc. In particular a parameter `31` means red, `32` green, `34` blue,
`4` underline, and `0` means reset to normal. Those are all we use.
There is also a `38`. This is used for setting colors too... but it
needs arguments. `38;5;nn` is color nn from a 256-color palette, and
`38;2;rr;gg;bb` has the given RGB values.
There is no meaning defined for `38;1` or `38;34` etc. On seeing a
parameter `38` followed by an unrecognized argument for it, apparently
some implementations (as seen on macOS) discard only the `38` and
others (as seen on Linux) discard the argument too before resuming.
This line has been this way since it was written, in 9e08f5efe
in 2006.
I think it was just a small mistake then; Eelco's thesis earlier
that year says the permission on each file is set to 0444 or 0555
in a derivation's output as part of the build process. In any
case I'm pretty sure that's the behavior now.
After installing Nix, I found that all the files and directories
initially copied into the store were writable, with mode 644 or 755:
drwxr-xr-x 9 root root 4096 Dec 31 1969 /nix/store/ddmmzn4ggz1f66lwxjy64n89864yj9w9-nix-2.3.3
The reason is that that's how they were in the unpacked tarball, and
the install-multi-user script used `rsync -p` without doing anything
else to affect the permissions.
The plain `install` script for a single-user install takes care to
do a `chmod -R a-w` on each store path copied. We could do the same
here with one more command; or we can pass `--chmod` to rsync, to
have it write the files with the desired modes in the first place.
Tested the new `rsync` command on both a Linux machine with a
reasonably-modern rsync (3.1.3) and a Mac with its default, ancient,
rsync 2.6.9, and it works as expected on both. Thankfully the latter
is just new enough to have `--chmod`, which dates to rsync 2.6.7.
Sadly 10.15 changed /bin/sh to a shim which executes bash, this means it
can't be used anymore without also opening up the sandbox to allow bash.
Failed to exec /bin/bash as variant for /bin/sh (1: Operation not permitted).
This is used to determine the dependency tree of impure libraries so nix
knows what paths to open in the sandbox. With the less restrictive
defaults it isn't needed anymore.
Running `nix-store --gc --delete` will, as of Nix 2.3.3, simply fail
because the --delete option conflicts with the --delete operation.
$ nix-store --gc --delete
error: only one operation may be specified
Try 'nix-store --help' for more information.
Furthermore, it has been broken since at least Nix 0.16 (which was
released sometime in 2010), which means that any scripts which depend
on it should have been broken at least nine years ago. This commit
simply formally removes the option. There should be no actual difference
in behaviour as far as the user is concerned: it errors with the exact
same error message. The manual has been edited to remove any references
to the (now gone) --delete option.
Other information:
* Path for Nix 0.16 used:
/nix/store/rp3sgmskn0p0pj1ia2qwd5al6f6pinz4-nix-0.16
If you do a fetchTree on a Git repository, whether the result contains
a revCount attribute should not depend on whether that repository
happens to be a shallow clone or not. That would complicate caching a
lot and would be semantically messy. So applying fetchTree/fetchGit to
a shallow repository is now an error unless you pass the attribute
'shallow = true'. If 'shallow = true', we don't return revCount, even
if the repository is not actually shallow.
Note that Nix itself is not doing shallow clones at the moment. But it
could do so as an optimisation if the user specifies 'shallow = true'.
Issue #2988.
Unless the 'tested' job in the Nixpkgs/NixOS jobsets, this job isn't
actually used for anything (e.g. we don't update a channel based on
whether 'release' succeeds).
Source tarballs are not very useful anymore. People who want to build
from source can also just build from the Git repository. Once upon a
time, the source tarball also saved users from needing a few
dependencies (e.g. bison and flex) but those are dwarfed by the other
dependencies, so it's no longer worth it.
Note: the release script should be updated to copy the vendoredCrates
tarball.
Currently the build fails with
warning: reject refs/heads/HEAD because shallow roots are not allowed to be updated
error: Could not read 0c2088d438
fatal: Failed to traverse parents of commit ea1803efdc
error: program 'git' failed with exit code 128
This file is licensed under the GPL. Originally, Nix was also
GPL-licensed so that was fine. However, we later changed the license
to the LGPL but missed the fact that style.css has an incompatible
license.
Since the Nix manual at nixos.org uses its own styling, we can remove
this file.
Fixes#3392.
In
nix-instantiate --dry-run '<nixpkgs/nixos/release-combined.nix>' -A nixos.tests.simple.x86_64-linux
this reduces time spent in unparse() from 9.15% to 4.31%. The main
culprit was appending characters one at a time to the destination
string. Even though the string has enough capacity, push_back() still
needs to check this on every call.
Note: like 'nix run', and unlike 'nix-shell', this takes an argv
vector rather than a shell command. So
nix dev-shell -c 'echo $PATH'
doesn't work. Instead you need to do
nix dev-shell -c bash -c 'echo $PATH'
The problem fixed: each nix-shell invocation creates a new temporary
directory (`/tmp/nix-shell-*`) and never cleans up.
And while I'm here, shellescape all variables inlined into the rcfile.
See what might happen without escaping:
$ export TZ="';echo pwned'"
$ nix-shell -p hello --run hello
pwned
Hello, world!
Worktrees[1] are a feature of git which allow you to check out a ref in
a different directory.
While playing around with flakes I realized that git repositories in a
worktree checkout break when trying to build a flake:
```
$ git worktree add ../nixpkgs-flakes nixpkgs-flakes
$ cd ../nixpkgs-flakes
$ nix build .#hello
error: opening directory '/home/ma27/Projects/nixpkgs-flakes/.git/refs/heads': Not a directory
```
This issue has been fixed by determining with `git rev-parse --git-common-dir`
where the actual `.git` directory is.
Please note that this issue only exists on the `flakes` branch, fetching
worktree checkouts with Nix master seems to work fine.
[1] https://git-scm.com/docs/git-worktree
The flag is `--pure-eval`, which can be found by looking at the test suite; it
should be in the notes describing the feature as well, since otherwise users may
assume this is referencing something like `nix-shell --pure`.
The ssh client is lazily started by the first worker thread, that
requires a ssh connection. To avoid the ssh client to be killed, when
the worker process is stopped, do not set PR_SET_PDEATHSIG.
This allows all supported fetchers to be used, e.g.
builtins.fetchTree {
type = "github";
owner = "NixOS";
repo = "nix";
rev = "d4df99a3349cf2228a8ee78dea320afef86eb3ba";
}
Brings the functionality of ssh-ng:// in sync with the legacy ssh://
implementation. Specifying the remote store uri enables various useful
things. eg.
$ nix copy --to ssh-ng://cache?remote-store=file://mnt/cache --all
This improves reproducibility and may be faster than fetching from the
original source (especially for git/hg inputs, but probably also for
github inputs - our binary cache is probably faster than GitHub's
dynamically generated tarballs).
Unfortunately this doesn't work for the top-level flake since even if
we know the NAR hash of the tree, we don't know the other tree
attributes such as revCount and lastModified.
Fixes#3253.
This copies a flake and all its inputs recursively to a store (e.g. a
binary cache). This is intended to enable long-term reproducibility
for flakes. However this will also require #3253.
Example:
$ nix flake archive --json --to file:///tmp/my-cache nixops
{"path":"/nix/store/272igzkgl1gdzmabsjvb2kb2zqbphb3p-source","inputs":{"nixops-aws":{"path":"/nix/store/ybcykw13gr7iq1pzg18iyibbcv8k9q1v-source","inputs":{}},"nixops-hetzner":{"path":"/nix/store/6yn0205x3nz55w8ms3335p2841javz2d-source","inputs":{}},"nixpkgs":{"path":"/nix/store/li3lkr2ajrzphqqz3jj2avndnyd3i5lc-source","inputs":{}}}}
$ ll /tmp/my-cache
total 16
-rw-r--r-- 1 eelco users 403 Jan 30 01:01 272igzkgl1gdzmabsjvb2kb2zqbphb3p.narinfo
-rw-r--r-- 1 eelco users 403 Jan 30 01:01 6yn0205x3nz55w8ms3335p2841javz2d.narinfo
-rw-r--r-- 1 eelco users 408 Jan 30 01:01 li3lkr2ajrzphqqz3jj2avndnyd3i5lc.narinfo
drwxr-xr-x 2 eelco users 6 Jan 30 01:01 nar
-rw-r--r-- 1 eelco users 21 Jan 30 01:01 nix-cache-info
-rw-r--r-- 1 eelco users 404 Jan 30 01:01 ybcykw13gr7iq1pzg18iyibbcv8k9q1v.narinfo
Fixes#3336.
Typical usage:
$ nix flake update ~/Misc/eelco-configurations/hagbard --update-input nixpkgs
to update the 'nixpkgs' input of a flake while leaving every other
input unchanged.
The argument is an input path, so you can do e.g. '--update-input
dwarffs/nixpkgs' to update an input of an input.
Fixes#2928.
Added a flag --no-update-lock-file to barf if the lock file needs any
changes. This is useful for CI systems if you're building a
checkout. Fixes#2947.
Renamed --no-save-lock-file to --no-write-lock-file. It is now a fatal
error if the lock file needs changes but --no-write-lock-file is not
given.
E.g.
$ nix flake update ~/Misc/eelco-configurations/hagbard \
--override-input 'dwarffs/nixpkgs' ../my-nixpkgs
overrides the 'nixpkgs' input of the 'dwarffs' input of the top-level
flake.
Fixes#2837.
When computing a lock file, we now respect the lock files of flake
inputs. This is important for usability / reproducibility. For
example, the 'nixops' flake depends on the 'nixops-aws' and
'nixops-hetzner' repositories. So when the 'nixops' flake is used in
another flake, we want the versions of 'nixops-aws' and
'nixops-hetzner' locked by the the 'nixops' flake because those
presumably have been tested.
This can lead to a proliferation of versions of flakes like 'nixpkgs'
(since every flake's lock file could depend on a different version of
'nixpkgs'). This is not a major issue when using Nixpkgs overlays or
NixOS modules, since then the top-level flake composes those
overlays/modules into *its* version of Nixpkgs and all other versions
are ignored. Lock file computation has been made a bit more lazy so it
won't try to fetch all those versions of 'nixpkgs'.
However, in case it's necessary to minimize flake versions, there now
are two input attributes that allow this. First, you can copy an input
from another flake, as follows:
inputs.nixpkgs.follows = "dwarffs/nixpkgs";
This states that the calling flake's 'nixpkgs' input shall be the same
as the 'nixpkgs' input of the 'dwarffs' input.
Second, you can override inputs of inputs:
inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
inputs.nixops.inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
or equivalently, using 'follows':
inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
inputs.nixops.inputs.nixpkgs.follows = "nixpkgs";
This states that the 'nixpkgs' input of the 'nixops' input shall be
the same as the calling flake's 'nixpkgs' input.
Finally, at '-v' Nix now prints the changes to the lock file, e.g.
$ nix flake update ~/Misc/eelco-configurations/hagbard
inputs of flake 'git+file:///home/eelco/Misc/eelco-configurations?subdir=hagbard' changed:
updated 'nixpkgs': 'github:edolstra/nixpkgs/7845bf5f4b3013df1cf036e9c9c3a55a30331db9' -> 'github:edolstra/nixpkgs/03f3def66a104a221aac8b751eeb7075374848fd'
removed 'nixops'
removed 'nixops/nixops-aws'
removed 'nixops/nixops-hetzner'
removed 'nixops/nixpkgs'
On a systemd-based Linux distribution: If the user has previously had multi-user Nix installed on the system, removed it and then reinstalled multi-user Nix again the old nix-daemon.service will still be running when `scripts/install-systemd-multi-user.sh` tries to start it which results in nothing being done and the old daemon continuing its run.
When a normal user then tries to use Nix through the daemon the nix binary will fail to connect to the nix-daemon as it does not belong to the currently installed Nix system. See below for steps to reproduce the issue that motivated this change.
$ sh <(curl https://nixos.org/nix/install) --daemon
$ sudo rm -rf /etc/nix /nix /root/.nix-profile /root/.nix-defexpr /root/.nix-channels /home/nix-installer/.nix-profile /home/nix-installer/.nix-defexpr /home/nix-installer/.nix-channels ~/.nix-channels ~/.nix-defexpr/ ~/.nix-profile /etc/profile.d/nix.sh.backup-before-nix /etc/profile.d/nix.sh; sed -i '/added by Nix installer$/d' ~/.bash_profile
$ unset NIX_REMOTE
$ sh <(curl https://nixos.org/nix/install) --daemon
└$ export NIX_REMOTE=daemon
└$ nix-env -iA nixpkgs.hello
installing 'hello-2.10'
error: cannot connect to daemon at '/nix/var/nix/daemon-socket/socket': No such file or directory
(use '--show-trace' to show detailed location information)
└$ sudo systemctl restart nix-daemon.service
└$ nix-env -iA nixpkgs.hello
installing 'hello-2.10'
these paths will be fetched (6.09 MiB download, 27.04 MiB unpacked):
/nix/store/2g75chlbpxlrqn15zlby2dfh8hr9qwbk-hello-2.10
/nix/store/aag9d1y4wcddzzrpfmfp9lcmc7skd7jk-glibc-2.27
copying path '/nix/store/aag9d1y4wcddzzrpfmfp9lcmc7skd7jk-glibc-2.27' from 'https://cache.nixos.org'...
copying path '/nix/store/2g75chlbpxlrqn15zlby2dfh8hr9qwbk-hello-2.10' from 'https://cache.nixos.org'...
building '/nix/store/w9adagg6vlikr799nkkqc9la5hbbpgmi-user-environment.drv'...
created 2 symlinks in user environment
Fixes
error: derivation '/nix/store/klivma7r7h5lndb99f7xxmlh5whyayvg-zlib-1.2.11.drv' has incorrect output '/nix/store/fv98nnx5ykgbq8sqabilkgkbc4169q05-zlib-1.2.11-dev', should be '/nix/store/adm7pilzlj3z5k249s8b4wv3scprhzi1-zlib-1.2.11-dev'
- At the top of the release notes, we announce sandboxing is now enabled by default,
then at the bottom it says it's now disabled when missing kernel support. These
can be merged into one point for clarity.
- The point about `max-jobs` defaulting to 1 appears unrelated to sandboxing.
Includes the expression of the condition in the assertion message if
the assertion failed, making assertions much easier to debug. eg.
error: assertion (withPython -> (python2Packages != null)) failed at pkgs/tools/security/nmap/default.nix:11:1
As fromTOML supports \u and \U escapes, bring fromJSON on par. As JSON defaults
to UTF-8 encoding (every JSON parser must support UTF-8), this change parses the
`\u hex hex hex hex` sequence (\u followed by 4 hexadecimal digits) into an
UTF-8 representation.
Add a test to verify correct parsing, using all escape sequences from json.org.
This prevents them from being inlined. On gcc 9, this reduces the
stack size needed for
nix-instantiate '<nixpkgs>' -A texlive.combined.scheme-full --dry-run
from 12.9 MiB to 4.8 MiB.
Having a colon in the path may cause issues, and having the hash
function indicated isn't actually necessary. We now verify the path
format in the tests to prevent regressions.
Before, we would get:
[deploy@bastion:~]$ nix-store -r /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
these derivations will be built:
/nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv
/nix/store/ssxwmll7v21did1c8j027q0m8w6pg41i-unit-prometheus-alertmanager-irc-notifier.service.drv
/nix/store/mvyvkj46ay7pp7b1znqbkck2mq98k0qd-unit-script-network-local-commands-start.drv
/nix/store/vsl1y9mz38qfk6pyirjwnfzfggz5akg6-unit-network-local-commands.service.drv
/nix/store/wi5ighfwwb83fdmav6z6n2fw6npm9ffl-unit-prometheus-hydra-exporter.service.drv
/nix/store/x0qkv535n75pbl3xn6nn1w7qkrg9wwyg-unit-prometheus-packet-sd.service.drv
/nix/store/lv491znsjxdf51xnfxh9ld7r1zg14d52-unit-script-packet-sd-env-key-pre-start.drv
/nix/store/nw4nzlca49agsajvpibx7zg5b873gk9f-unit-script-packet-sd-env-key-start.drv
/nix/store/x674wwabdwjrkhnykair4c8mpxa9532w-unit-packet-sd-env-key.service.drv
/nix/store/ywivz64ilb1ywlv652pkixw3vxzfvgv8-unit-wireguard-wg0.service.drv
/nix/store/v3b648293g3zl8pnn0m1345nvmyd8dwb-unit-script-acme-selfsigned-status.nixos.org-start.drv
/nix/store/zci5d3zvr6fgdicz6k7jjka6lmx0v3g4-unit-acme-selfsigned-status.nixos.org.service.drv
/nix/store/f6pwvnm63d0kw5df0v7sipd1rkhqxk5g-system-units.drv
/nix/store/iax8071knxk9c7krpm9jqg0lcrawf4lc-etc.drv
/nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
error: invalid file name 'closure-init-0' in 'exportReferencesGraph'
This was tough to debug, I didn't figure out which one was broken until I did:
nix-store -r /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv 2>&1 | grep nix/store | xargs -n1 nix-store -r
and then looking at the remaining build graph:
$ nix-store -r /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
these derivations will be built:
/nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv
/nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
error: invalid file name 'closure-init-0' in 'exportReferencesGraph'
and knowing the initrd build is before the system, then:
$ nix show-derivation /nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv
{
"/nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv": {
[...]
"exportReferencesGraph": "closure-init-0 /nix/store/...-stage-1-init.sh closure-mdadm.conf-1 /nix/store/...-mdadm.conf closure-ubuntu.conf-2 ...",
[...]
}
}
I then searched the repo for "in 'exportReferencesGraph'", found this
recently updated regex, and realized it was missing a "-".
Before:
$ nix-channel --update
unpacking channels...
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
After:
$ inst/bin/nix-channel --update
unpacking channels...
created 1 symlinks in user environment
I've seen complaints that "sandbox" caused problems under WSL but I'm
having no problems. I think recent changes could have fixed the issue.
This allows overriding the priority of substituters, e.g.
$ nix-store --store ~/my-nix/ -r /nix/store/df3m4da96d84ljzxx4mygfshm1p0r2n3-geeqie-1.4 \
--substituters 'http://cache.nixos.org?priority=100 daemon?priority=10'
Fixes#3264.
There is no termination condition for evaluation of cyclical
expression paths which can lead to infinite loops. This addresses
one spot in the parser in a similar fashion as utils.cc/canonPath
does.
This issue can be reproduced by something like:
```
ln -s a b
ln -s b a
nix-instantiate -E 'import ./a'
```
If the `throw` is reached, this means that execvp into `ssh` wasn’t
successful. We can hint at a usual problem, which is a missing `ssh`
executable.
Test with:
```
env PATH= ./result/bin/nix-copy-closure --builders '' unusedhost
```
and the bash version with
```
env PATH= ./result/bin/nix-copy-closure --builders '' localhost
```
Most functions now take a StorePath argument rather than a Path (which
is just an alias for std::string). The StorePath constructor ensures
that the path is syntactically correct (i.e. it looks like
<store-dir>/<base32-hash>-<name>). Similarly, functions like
buildPaths() now take a StorePathWithOutputs, rather than abusing Path
by adding a '!<outputs>' suffix.
Note that the StorePath type is implemented in Rust. This involves
some hackery to allow Rust values to be used directly in C++, via a
helper type whose destructor calls the Rust type's drop()
function. The main issue is the dynamic nature of C++ move semantics:
after we have moved a Rust value, we should not call the drop function
on the original value. So when we move a value, we set the original
value to bitwise zero, and the destructor only calls drop() if the
value is not bitwise zero. This should be sufficient for most types.
Also lots of minor cleanups to the C++ API to make it more modern
(e.g. using std::optional and std::string_view in some places).
The FunctionCallTrace object consumes a few hundred bytes of stack
space, even when tracing is disabled. This was causing stack overflows:
$ nix-instantiate '<nixpkgs> -A texlive.combined.scheme-full --dry-run
error: stack overflow (possible infinite recursion)
This is with the default stack size of 8 MiB.
Putting the object on the heap reduces stack usage to < 5 MiB.
This is a hack to fix the build on macOS, which was failing because
libnixrust.a contains compiler builtins that clash with
libclang_rt.osx.a. There's probably a better solution...
https://hydra.nixos.org/build/107473280
https://hydra.nixos.org/build/107467517
Seems that on i686-linux, gcc and rustc disagree on how to return
1-word structs: gcc has the caller pass a pointer to the result, while
rustc has the callee return the result in a register. Work around this
by using a bare pointer.
This replaces the '(...)' installable syntax, which is not very
discoverable. The downside is that you can't have multiple expressions
or mix expressions and other installables.
Also, fetchGit now runs in O(1) memory since we pipe the output of
'git archive' directly into unpackTarball() (rather than first reading
it all into memory).
We can now convert Rust Errors to C++ exceptions. At the Rust->C++ FFI
boundary, Result<T, Error> will cause Error to be converted to and
thrown as a C++ exception.
E.g.
$ nix-build '<nixpkgs>' -A hello --experimental-features no-url-literals
error: URL literals are disabled, at /nix/store/vsjamkzh15r3c779q2711az826hqgvzr-nixpkgs-20.03pre194957.bef773ed53f/nixpkgs/pkgs/top-level/all-packages.nix:1236:11
Helps with implementing https://github.com/NixOS/rfcs/pull/45.
A corrupt entry in .links prevents adding a fixed version of that file
to the store in any path. The user experience is that corruption
present in the store 'spreads' to new paths added to the store:
(With store optimisation enabled)
1. A file in the store gets corrupted somehow (eg: filesystem bug).
2. The user tries to add a thing to the store which contains a good copy
of the corrupted file.
3. The file being added to the store is hashed, found to match the bad
.links entry, and is replaced by a link to the bad .links entry.
(The .links entry's hash is not verified during add -- this would
impose a substantial performance burden.)
4. The user observes that the thing in the store that is supposed to be
a copy of what they were trying to add is not a correct copy -- some
files have different contents! Running "nix-store --verify
--check-contents --repair" does not fix the problem.
This change makes "nix-store --verify --check-contents --repair" fix
this problem. Bad .links entries are simply removed, allowing future
attempts to insert a good copy of the file to succeed.
This doesn't work anymore since `packages` was removed from the
`nixpkgs`-fork with flake support[1], now it's only possible to refer to
pkgs via `legacyPackages`.
[1] 49c9b71e4c
This documents the outcome of the change in
https://github.com/NixOS/nix/issues/454:
> We can also automatically add parentheses in the generated
> `buildInputs`, so you can type `nix-shell -p "expr"`
> instead of `"(expr").
The store path is not enough. For example, when we build a dirty tree,
commit, and build the clean tree, a re-evaluation is necessary because
the flake may depend on the lastModified or revCount attributes.
Derivations that want to use recursion should now set
requiredSystemFeatures = [ "recursive-nix" ];
to make the daemon socket appear.
Also, Nix should be configured with "experimental-features =
recursive-nix".
This allows Nix builders to call Nix to build derivations, with some
limitations.
Example:
let nixpkgs = fetchTarball channel:nixos-18.03; in
with import <nixpkgs> {};
runCommand "foo"
{
buildInputs = [ nix jq ];
NIX_PATH = "nixpkgs=${nixpkgs}";
}
''
hello=$(nix-build -E '(import <nixpkgs> {}).hello.overrideDerivation (args: { name = "hello-3.5"; })')
$hello/bin/hello
mkdir -p $out/bin
ln -s $hello/bin/hello $out/bin/hello
nix path-info -r --json $hello | jq .
''
This derivation makes a recursive Nix call to build GNU Hello and
symlinks it from its $out, i.e.
# ll ./result/bin/
lrwxrwxrwx 1 root root 63 Jan 1 1970 hello -> /nix/store/s0awxrs71gickhaqdwxl506hzccb30y5-hello-3.5/bin/hello
# nix-store -qR ./result
/nix/store/hwwqshlmazzjzj7yhrkyjydxamvvkfd3-glibc-2.26-131
/nix/store/s0awxrs71gickhaqdwxl506hzccb30y5-hello-3.5
/nix/store/sgmvvyw8vhfqdqb619bxkcpfn9lvd8ss-foo
This is implemented as follows:
* Before running the outer builder, Nix creates a Unix domain socket
'.nix-socket' in the builder's temporary directory and sets
$NIX_REMOTE to point to it. It starts a thread to process
connections to this socket. (Thus you don't need to have nix-daemon
running.)
* The daemon thread uses a wrapper store (RestrictedStore) to keep
track of paths added through recursive Nix calls, to implement some
restrictions (see below), and to do some censorship (e.g. for
purity, queryPathInfo() won't return impure information such as
signatures and timestamps).
* After the build finishes, the output paths are scanned for
references to the paths added through recursive Nix calls (in
addition to the inputs closure). Thus, in the example above, $out
has a reference to $hello.
The main restriction on recursive Nix calls is that they cannot do
arbitrary substitutions. For example, doing
nix-store -r /nix/store/kmwd1hq55akdb9sc7l3finr175dajlby-hello-2.10
is forbidden unless /nix/store/kmwd... is in the inputs closure or
previously built by a recursive Nix call. This is to prevent
irreproducible derivations that have hidden dependencies on
substituters or the current store contents. Building a derivation is
fine, however, and Nix will use substitutes if available. In other
words, the builder has to present proof that it knows how to build a
desired store path from scratch by constructing a derivation graph for
that path.
Probably we should also disallow instantiating/building fixed-output
derivations (specifically, those that access the network, but
currently we have no way to mark fixed-output derivations that don't
access the network). Otherwise sandboxed derivations can bypass
sandbox restrictions and access the network.
When sandboxing is enabled, we make paths appear in the sandbox of the
builder by entering the mount namespace of the builder and
bind-mounting each path. This is tricky because we do a pivot_root()
in the builder to change the root directory of its mount namespace,
and thus the host /nix/store is not visible in the mount namespace of
the builder. To get around this, just before doing pivot_root(), we
branch a second mount namespace that shares its /nix/store mountpoint
with the parent.
Recursive Nix currently doesn't work on macOS in sandboxed mode
(because we can't change the sandbox policy of a running build) and in
non-root mode (because setns() barfs).
The intent of the code was that if the window size cannot be determined,
it would be treated as having the maximum possible size. Because of a
missing assignment, it was actually treated as having a width of 0.
The reason the width could not be determined was because it was obtained
from stdout, not stderr, even though the printing was done to stderr.
This commit addresses both issues.
The `post-build-hook` text currently appears in the index, but not on the actual title line of the section, this follows the pattern used in a previous section to get a reference into a title.
Add missing docstring on InstallableCommand. Also, some of these were wrapped
when they're right next to a line longer than the unwrapped line, so we can just
unwrap them to save vertical space.
Fixes the following warning and the indicate potential issue:
src/libstore/worker-protocol.hh:66:1: warning: class 'Source' was previously declared as a struct; this is valid, but may result in linker errors
under the Microsoft C++ ABI [-Wmismatched-tags]
(cherry picked from commit 6e1bb04870b1b723282d32182af286646f13bf3c)
git show seems to print the entire tag message when being called on a tag
instead of a commit. git log instead always prints the correct timestamp
in my tests.
The error nix prints is: `error: stoull`.
This is an alternative to the IN_NIX_SHELL environment variable,
allowing the expression to adapt itself to nix-shell without
triggering those adaptations when used as a dependency of another
shell.
Closes#3147
This allows to have a repl-centric workflow to working on nixpkgs.
Usage:
:edit <package> - heuristic that find the package file path
:edit <path> - just open the editor on the file path
Once invoked, `nix repl` will open $EDITOR on that file path. Once the
editor exits, `nix repl` will automatically reload itself.
This adds a command 'nix make-content-addressable' that rewrites the
specified store paths into content-addressable paths. The advantage of
such paths is that 1) they can be imported without signatures; 2) they
can enable deduplication in cases where derivation changes do not
cause output changes (apart from store path hashes).
For example,
$ nix make-content-addressable -r nixpkgs.cowsay
rewrote '/nix/store/g1g31ah55xdia1jdqabv1imf6mcw0nb1-glibc-2.25-49' to '/nix/store/48jfj7bg78a8n4f2nhg269rgw1936vj4-glibc-2.25-49'
...
rewrote '/nix/store/qbi6rzpk0bxjw8lw6azn2mc7ynnn455q-cowsay-3.03+dfsg1-16' to '/nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16'
We can then copy the resulting closure to another store without
signatures:
$ nix copy --trusted-public-keys '' ---to ~/my-nix /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16
In order to support self-references in content-addressable paths,
these paths are hashed "modulo" self-references, meaning that
self-references are zeroed out during hashing. Somewhat annoyingly,
this means that the NAR hash stored in the Nix database is no longer
necessarily equal to the output of "nix hash-path"; for
content-addressable paths, you need to pass the --modulo flag:
$ nix path-info --json /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16 | jq -r .[].narHash
sha256:0ri611gdilz2c9rsibqhsipbfs9vwcqvs811a52i2bnkhv7w9mgw
$ nix hash-path --type sha256 --base32 /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16
1ggznh07khq0hz6id09pqws3a8q9pn03ya3c03nwck1kwq8rclzs
$ nix hash-path --type sha256 --base32 /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16 --modulo iq6g2x4q62xp7y7493bibx0qn5w7xz67
0ri611gdilz2c9rsibqhsipbfs9vwcqvs811a52i2bnkhv7w9mgw
Fixes
error: the content hash of flake '/home/eelco/Dev/nixpkgs-flake?ref=HEAD&rev=0000000000000000000000000000000000000000' doesn't match the hash recorded in the referring lockfile
Experimental features are now opt-in. There is currently one
experimental feature: "nix-command" (which enables the "nix"
command. This will allow us to merge experimental features more
quickly, without committing to supporting them indefinitely.
Typical usage:
$ nix build --experimental-features 'nix-command flakes' nixpkgs#hello
(cherry picked from commit 8e478c2341,
without the "flakes" feature)
Experimental features are now opt-in. There are currently two
experimental features: "nix-command" (which enables the "nix"
command), and "flakes" (which enables support for flakes). This will
allow us to merge experimental features more quickly, without
committing to supporting them indefinitely.
Typical usage:
$ nix build --experimental-features 'nix-command flakes' nixpkgs#hello
In particular, when building a flake lock file, inputs like 'nixpkgs'
are now downloaded only once. Previously, it would fetch
https://api.github.com/repos/<owner>/<repo>/tarball/<ref> and then
later https://api.github.com/repos/<owner>/<repo>/tarball/<rev>, even
though they produce the same result.
Git and GitHub now also share a cache that maps revs to a store path
and other info.
A command like
$ nix run nixpkgs#hello
will now build the attribute 'packages.${system}.hello' rather than
'packages.hello'. Note that this does mean that the flake needs to
export an attribute for every system type it supports, and you can't
build on unsupported systems. So 'packages' typically looks like this:
packages = nixpkgs.lib.genAttrs ["x86_64-linux" "i686-linux"] (system: {
hello = ...;
});
The 'checks', 'defaultPackage', 'devShell', 'apps' and 'defaultApp'
outputs similarly are now attrsets that map system types to
derivations/apps. 'nix flake check' checks that the derivations for
all platforms evaluate correctly, but only builds the derivations in
'checks.${system}'.
Fixes#2861. (That issue also talks about access to ~/.config/nixpkgs
and --arg, but I think it's reasonable to say that flakes shouldn't
support those.)
The alternative to attribute selection is to pass the system type as
an argument to the flake's 'outputs' function, e.g. 'outputs = { self,
nixpkgs, system }: ...'. However, that approach would be at odds with
hermetic evaluation and make it impossible to enumerate the packages
provided by a flake.
The tmpDirInSandbox is different when in sandboxed vs. non-sandboxed.
Since we don’t know ahead of time here whether sandboxing is enabled,
we need to reset all of the env vars we’ve set previously. This fixes
the issue encountered in https://github.com/NixOS/nixpkgs/issues/70856.
We're calling `wait4path` on the full, resolved `@bindir@/nix-daemon` path.
That means we're hardcoding something like:
/bin/wait4path /nix/store/zs9c5xhp3zv9p23qnjxp87nl5injsi1i-nix-2.3/bin/nix-daemon && /nix/var/nix/profiles/default/bin/nix-daemon
That seems unnecessarily fragile.
It might be better to wait4path on the path we intend to call.
Previously, SANDBOX_SHELL was set to empty when unavailable. This
caused issues when actually generating the sandbox. Instead, just set
SANDBOX_SHELL when --with-sandbox-shell= is non-empty. Alternative
implementation to https://github.com/NixOS/nix/pull/3038.
Pure mode should not try to source the user’s bashrc file. These may
have many impurities that the user does not expect to get into their
shell.
Fixes#3090
In the multi-user install script, we originally made sure no previous
references to Nix existed. This prevented any previous installs from
contaminating the new install. However, some users need the ability to
repair their existing Nix installation without uninstalling all
references to Nix. This change allows users with existing Nix
installations to use the installer, while still outputing a warning
message on the dangers of this. As a result, the multi-user install
script work much more like the single-user install script has worked
in the past.
This is a requirement for macOS Catalina users now that
/Library/LaunchDaemons/org.nixos.nix-daemon.plisg is not managed by
the Nix store. If there is ever a change to the .plist, all users will
need to rerun this install script to get the new changes. Otherwise,
changes to the launch daemon will require manual interventions.
On Catalina, the /nix filesystem might not be mounted at start time.
To avoid this service not starting, we need to keep the launch agent
outside of the Nix store. A wait4pid will hold for our /nix dir to be
mounted.
Fixes#3125.
Fixes
$ nix build
fatal: bad revision 'HEAD'
error: program 'git' failed with exit code 128
on a new flake. It is now detected as a dirty tree with revCount = 0.
This is to ensure that references like 'nix.dev' in dwarffs work
regardless of whether we're using the 'nix' package from this overlay
or from Nixpkgs.
When running nix doctor on a healthy system, it just prints the store URI and
nothing else. This makes it unclear whether the system is in a good state and
what check(s) it actually ran, since some of the checks are optional depending
on the store type.
This commit updates nix doctor to print an colored log message for every check
that it does, and explicitly state whether that check was a PASS or FAIL to make
it clear to the user whether the system passed its checkup with the doctor.
Fixes#3084
Only variables that were marked as exported are exported in the dev
shell. Also, we no longer try to parse the function section of the env
file, fixing
$ nix dev-shell
error: shell environment '/nix/store/h7ama3kahb8lypf4nvjx34z06g9ncw4h-nixops-1.7pre20190926.4c7acbb-env' has unexpected line '/^[a-z]?"""/ {'
For example, if the top-level flake depends on
"nixpkgs/release-19.03", and one of its dependencies depends on
"nixpkgs", then the latter will be mapped to "nixpkgs/release-19.03",
rather than whatever the default branch of "nixpkgs" is. Thus you get
only one "nixpkgs" dependency rather than two.
This currently only works in a breadth-first way, so the other way
around (i.e. if the top-level flake depends on "nixpkgs", and a
dependency depends on "nixpkgs/release-19.03") still results in two
"nixpkgs" dependencies.
If 'input.<name>.uri' changes, then the entry in the lockfile for
input <name> should be considered stale.
Also print some messages when lock file entries are added/updated.
With the merge of #2582, the syntax "tags/1.9" for refs does not work
anymore.
However, the new syntax "refs/tags/1.9" seems to support annotated tags,
such as "refs/tags/2.0".
Closes#2385.
This integrates the functionality of the index-debuginfo program in
nixos-channel-scripts to maintain an index of DWARF debuginfo files in
a format usable by dwarffs. Thus the debug info index is updated by
Hydra rather than by the channel mirroring script.
Example usage:
$ nix copy --to 'file:///tmp/binary-cache?index-debug-info=true' /nix/store/vr9mhcch3fljzzkjld3kvkggvpq38cva-nix-2.2.2-debug
$ cat /tmp/binary-cache/debuginfo/036b210b03bad75ab2d8fc80b7a146f98e7f1ecf.debug
{"archive":"../nar/0313h2kdhk4v73xna9ysiksp2v8xrsk5xsw79mmwr3rg7byb4ka8.nar.xz","member":"lib/debug/.build-id/03/6b210b03bad75ab2d8fc80b7a146f98e7f1ecf.debug"}
Fixes#3083.
So you now get
$ nix build
error: path '.' is not a flake (because it does not reference a Git repository)
rather than
$ nix build
error: unsupported argument '.'
Instead of a list, inputs are now an attrset like
inputs = {
nixpkgs.uri = github:NixOS/nixpkgs;
};
If 'uri' is omitted, than the flake is a lookup in the flake registry, e.g.
inputs = {
nixpkgs = {};
};
but in that case, you can also just omit the input altogether and
specify it as an argument to the 'outputs' function, as in
outputs = { self, nixpkgs }: ...
This also gets rid of 'nonFlakeInputs', which are now just a special
kind of input that have a 'flake = false' attribute, e.g.
inputs = {
someRepo = {
uri = github:example/repo;
flake = false;
};
};
This ensures that stdenv / setup hooks take $IN_NIX_SHELL into
account. For example, stdenv only sets
NIX_SSL_CERT_FILE=/no-cert-file.crt if we're not in a shell.
This replaces 'nix-env --set'. For example:
$ nix build --profile /nix/var/nix/profiles/system \
~/Misc/eelco-configurations:nixosConfigurations.vyr.config.system.build.toplevel
updates the NixOS system profile from a flake.
This could have been a separate command (e.g. 'nix set-profile') but
1) '--profile' is pretty similar to '--out-link'; and 2) '--profile'
could be useful for other command (like 'nix dev-shell').
Once we've started writing data to a Sink, we can't restart a download
request, because then we end up writing duplicate data to the
Sink. Therefore we shouldn't handle retries in Downloader but at a
higher level (in particular, in copyStorePath()).
Fixes#2952.
--no-net causes tarballTtl to be set to the largest 32-bit integer,
which causes comparison like 'time + tarballTtl < other_time' to
fail on 32-bit systems. So cast them to 64-bit first.
https://hydra.nixos.org/build/95076624
This flag
* Disables substituters.
* Sets the tarball-ttl to infinity (ensuring e.g. that the flake
registry and any downloaded flakes are considered current).
* Disables retrying downloads and sets the connection timeout to the
minimum. (So it doesn't completely disable downloads at the moment.)
This exploits the hermetic nature of flake evaluation to speed up
repeated evaluations of a flake output attribute.
For example (doing 'nix build' on an already present package):
$ time nix build nixpkgs:firefox
real 0m1.497s
user 0m1.160s
sys 0m0.139s
$ time nix build nixpkgs:firefox
real 0m0.052s
user 0m0.038s
sys 0m0.007s
The cache is ~/.cache/nix/eval-cache-v1.sqlite, which has entries like
INSERT INTO Attributes VALUES(
X'92a907d4efe933af2a46959b082cdff176aa5bfeb47a98fabd234809a67ab195',
'packages.firefox',
1,
'/nix/store/pbalzf8x19hckr8cwdv62rd6g0lqgc38-firefox-67.0.drv /nix/store/g6q0gx0v6xvdnizp8lrcw7c4gdkzana0-firefox-67.0 out');
where the hash 92a9... is a fingerprint over the flake store path and
the contents of the lockfile. Because flakes are evaluated in pure
mode, this uniquely identifies the evaluation result.
As long as the flake input is locked, it is now only fetched when it
is evaluated (e.g. "nixpkgs" is fetched when
"inputs.nixpkgs.<something>" is evaluated).
This required adding an "id" attribute to the members of "inputs" in
lockfiles, e.g.
"inputs": {
"nixpkgs/release-19.03": {
"id": "nixpkgs",
"inputs": {},
"narHash": "sha256-eYtxncIMFVmOHaHBtTdPGcs/AnJqKqA6tHCm0UmPYQU=",
"nonFlakeInputs": {},
"uri": "github:edolstra/nixpkgs/e9d5882bb861dc48f8d46960e7c820efdbe8f9c1"
}
}
because the flake ID needs to be known beforehand to construct the
"inputs" attrset.
Fixes#2913.
This is like 'nix run', except that the command to execute is defined
in a flake output, e.g.
defaultApp = {
type = "app";
program = "${packages.blender_2_80}/bin/blender";
};
Thus you can do
$ nix app blender-bin
to start Blender from the 'blender-bin' flake.
In the future, we can extend this with sandboxing. (For example we
would want to be able to specify that Blender should not have network
access by default and should only have access to certain paths in the
user's home directory.)
This is primarily useful for version string generation, where we need
a monotonically increasing number. The revcount is the preferred thing
to use, but isn't available for GitHub flakes (since it requires
fetching the entire history). The last commit timestamp OTOH can be
extracted from GitHub tarballs.
This ensures that flakes don't get garbage-collected, which is
important to get nix-channel-like behaviour.
For example, running
$ nix build hydra:
will create a GC root
~/.cache/nix/flake-closures/hydra -> /nix/store/xarfiqcwa4w8r4qpz1a769xxs8c3phgn-flake-closure
where the contents/references of the linked file in the store are the
flake source trees used by the 'hydra' flake:
/nix/store/n6d5f5lkpfjbmkyby0nlg8y1wbkmbc7i-source
/nix/store/vbkg4zy1qd29fnhflsv9k2j9jnbqd5m2-source
/nix/store/z46xni7d47s5wk694359mq9ay353ar94-source
Note that this in itself is not enough to allow offline use; the
fetcher for the flakeref (e.g. fetchGit or downloadCached) must not
fail if it cannot fetch the latest version of the file, so long as it
knows a cached version.
Issue #2868.
It was getting confused between logical and real store paths.
Also, make fetchGit and fetchMercurial update allowedPaths properly.
(Maybe the evaluator, rather than the caller of the evaluator, should
apply toRealPath(), but that's a bigger change.)
This PR was not intended to be merged until those tests were actually
passing. So disable them for now to unbreak the flakes branch.
https://hydra.nixos.org/eval/1519271
I.e. flake3 depends on flake2 which depends on flake1. Currently this
fails with
error: indirect flake reference 'flake1' is not allowed
because we're not propagating lockfiles downwards properly.
Thus
$ nix dev-shell
will now build the 'provides.devShell' attribute from the flake in the
current directory. If it doesn't exist, it falls back to
'provides.defaultPackage'.
'nix dev-shell' is intended to replace nix-shell. It supports flakes,
e.g.
$ nix dev-shell nixpkgs:hello
starts a bash shell providing an environment for building 'hello'.
Like Lorri (and unlike nix-shell), it computes the build environment
by building a modified top-level derivation that writes the
environment after running $stdenv/setup to $out and exits. This
provides some caching, so it's faster than nix-shell in some cases
(especially for packages with lots of dependencies, where the setup
script takes a long time).
There also is a command 'nix print-dev-env' that prints out shell code
for setting up the build environment in an existing shell, e.g.
$ . <(nix print-dev-env nixpkgs:hello)
https://github.com/tweag/nix/issues/21
Example:
$ nix flake info dwarffs
ID: dwarffs
URI: github:edolstra/dwarffs/a83d182fe3fe528ed6366a5cec3458bcb1a5f6e1
Description: A filesystem that fetches DWARF debug info from the Internet on demand
Revision: a83d182fe3fe528ed6366a5cec3458bcb1a5f6e1
Path: /nix/store/grgd14kxxk8q4n503j87mpz48gcqpqw7-source
This ensures that the lock file is updated *before* evaluating it, and
that it gets updated for any nix command, not just 'nix build'.
Also, while computing the lock file, allow arbitrary registry lookups,
not just at top-level.
Also, improve some error messages slightly.
Also allow "." as an installable to refer to the flake in the current
directory. E.g.
$ nix build .
will build 'provides.defaultPackage' in the flake in the current
directory.
Unlike file://<path>, this allows the path to be a dirty Git tree, so
nix build /path/to/flake:attr
is a convenient way to test building a local flake.
The general syntax for an installable is now
<flakeref>:<attrpath>. The attrpath is relative to the flake's
'provides.packages' or 'provides' if the former doesn't yield a
result. E.g.
$ nix build nixpkgs:hello
is equivalent to
$ nix build nixpkgs:packages.hello
Also, '<flakeref>:' can be omitted, in which case it defaults to
'nixpkgs', e.g.
$ nix build hello
This allows using an arbitrary "provides" attribute from the specified
flake. For example:
nix build --flake nixpkgs packages.hello
(Maybe provides.packages should be used for consistency...)
We want to encourage a brave new world of hermetic evaluation for
source-level reproducibility, so flakes should not poke around in the
filesystem outside of their explicit dependencies.
Note that the default installation source remains impure in that it
can refer to mutable flakes, so "nix build nixpkgs.hello" still works
(and fetches the latest nixpkgs, unless it has been pinned by the
user).
A problem with pure evaluation is that builtins.currentSystem is
unavailable. For the moment, I've hard-coded "x86_64-linux" in the
nixpkgs flake. Eventually, "system" should be a flake function
argument.
For example, github:edolstra/dwarffs is more-or-less equivalent to
https://github.com/edolstra/dwarffs.git. It's a much faster way to get
GitHub repositories: it fetches tarballs rather than entire Git
repositories. It also allows fetching specific revisions by hash
without specifying a ref (e.g. a branch name):
github:edolstra/dwarffs/41c0c1bf292ea3ac3858ff393b49ca1123dbd553
*WAIT* Are you sure you're filing your issue in the right repository?
We appreciate you taking the time to tell us about issues you encounter, but routing the issue to the right place will get you help sooner and save everyone time.
This is the Nix repository, and issues here should be about Nix the build and package management *_tool_*.
If you have a problem with a specific package on NixOS or when using Nix, you probably want to file an issue with _nixpkgs_, whose issue tracker is over at https://github.com/NixOS/nixpkgs/issues.
Examples of _Nix_ issues:
- Nix segfaults when I run `nix-build -A blahblah`
- The Nix language needs a new builtin: `builtins.foobar`
- Regression in the behavior of `nix-env` in Nix 2.0
Examples of _nixpkgs_ issues:
- glibc is b0rked on aarch64
- chromium in NixOS doesn't support U2F but google-chrome does!
- The OpenJDK package on macOS is missing a key component
Chances are if you're a newcomer to the Nix world, you'll probably want the [nixpkgs tracker](https://github.com/NixOS/nixpkgs/issues). It also gets a lot more eyeball traffic so you'll probably get a response a lot more quickly.
"Emit log messages for each function entry and exit at the 'vomit' log level (-vvvv)"};
"Emit log messages for each function entry and exit at the 'vomit' log level (-vvvv)."};
};
externEvalSettingsevalSettings;
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
