Removed mapi dependency from xpfe/bootstarp

Checking in for kkhandrika@netscape.com


git-svn-id: svn://10.0.0.236/branches/MAPI_TRUNK_LANDING@107016 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/mailnews/mapi/makefile.win

@@ -0,0 +1,28 @@
+# 
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+# 
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+# 
+# The Original Code is mozilla.org code.
+# 
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are 
+# Copyright (C) 2001 Netscape Communications Corporation.  All
+# Rights Reserved.
+# 
+# Contributor(s): 
+# Srilatha Moturi <srilatha@netscape.com>
+# Krishna Mohan Khandrika <kkhandrika@netscape.com>
+#
+
+DEPTH=..\..
+
+DIRS=mapihook resources mapiDll
+
+include <$(DEPTH)\config\rules.mak>

mozilla/mailnews/mapi/mapiDll/Mapi32.DEF

@@ -0,0 +1,54 @@
+; ***** BEGIN LICENSE BLOCK *****
+; Version: MPL 1.1/GPL 2.0/LGPL 2.1
+;
+; The contents of this file are subject to the Mozilla Public License Version
+; 1.1 (the "License"); you may not use this file except in compliance with
+; the License. You may obtain a copy of the License at
+; http://www.mozilla.org/MPL/
+;
+; Software distributed under the License is distributed on an "AS IS" basis,
+; WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+; for the specific language governing rights and limitations under the
+; License.
+;
+; The Original Code is Mozilla.
+;
+; The Initial Developer of the Original Code is
+; Netscape Communications Corp.
+; Portions created by the Initial Developer are Copyright (C) 2001
+; the Initial Developer. All Rights Reserved.
+;
+; Contributor(s):  Krishna Mohan Khandrika (kkhandrika@netscape.com)
+;
+; Alternatively, the contents of this file may be used under the terms of
+; either the GNU General Public License Version 2 or later (the "GPL"), or
+; the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+; in which case the provisions of the GPL or the LGPL are applicable instead
+; of those above. If you wish to allow use of your version of this file only
+; under the terms of either the GPL or the LGPL, and not to allow others to
+; use your version of this file under the terms of the MPL, indicate your
+; decision by deleting the provisions above and replace them with the notice
+; and other provisions required by the GPL or the LGPL. If you do not delete
+; the provisions above, a recipient may use your version of this file under
+; the terms of any one of the MPL, the GPL or the LGPL.
+;
+; ***** END LICENSE BLOCK ***** 
+
+LIBRARY         mozMapi32.dll
+DESCRIPTION     'Mozilla Simple MAPI Support'
+
+EXPORTS
+        MAPILogon
+        MAPILogoff
+	MAPISendMail
+	MAPISendDocuments
+        MAPIFindNext
+        MAPIReadMail
+        MAPISaveMail
+        MAPIDeleteMail
+        MAPIAddress
+        MAPIDetails
+        MAPIResolveName
+        MAPIFreeBuffer
+        GetMapiDllVersion
+

mozilla/mailnews/mapi/mapiDll/MapiDll.cpp

@@ -0,0 +1,335 @@
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is Mozilla
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corp.
+ * Portions created by the Initial Developer are Copyright (C) 2001
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s): Krishna Mohan Khandrika (kkhandrika@netscape.com)
+ * Contributor(s): Rajiv Dayal (rdayal@netscape.com)
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#include <windows.h>
+#include <tchar.h>
+#include <assert.h>
+#include <mapidefs.h>
+#include <mapi.h>
+#include "msgMapi.h"
+#include "msgMapiMain.h"
+
+#define MAX_RECIPS  100
+#define MAX_FILES   100
+
+const CLSID CLSID_nsMapiImp = {0x29f458be, 0x8866, 0x11d5,
+                              {0xa3, 0xdd, 0x0, 0xb0, 0xd0, 0xf3, 0xba, 0xa7}};
+const IID IID_nsIMapi = {0x6EDCD38E,0x8861,0x11d5,
+                        {0xA3,0xDD,0x00,0xB0,0xD0,0xF3,0xBA,0xA7}};
+
+DWORD tId = 0;
+
+BOOL WINAPI DllMain(HINSTANCE aInstance, DWORD aReason, LPVOID aReserved)
+{
+    switch (aReason)
+    {
+        case DLL_PROCESS_ATTACH : tId = TlsAlloc();
+                                  if (tId == 0xFFFFFFFF)
+                                      return FALSE;
+                                  break;
+
+        case DLL_PROCESS_DETACH : TlsFree(tId);
+                                  break;
+    }
+    return TRUE;
+}
+
+BOOL InitMozillaReference(nsIMapi **aRetValue)
+{
+    // Check wehther this thread has a valid Interface
+    // by looking into thread-specific-data variable
+
+    *aRetValue = (nsIMapi *)TlsGetValue(tId);
+
+    // Check whether the pointer actually resolves to
+    // a valid method call; otherwise mozilla is not running
+
+    if ((*aRetValue) && (*aRetValue)->IsValid() == S_OK)
+         return TRUE;
+
+    HRESULT hRes = CoInitialize(NULL);
+
+    hRes = ::CoCreateInstance(CLSID_nsMapiImp, NULL, CLSCTX_LOCAL_SERVER,
+                                         IID_nsIMapi, (LPVOID *)aRetValue);
+
+    if (hRes == S_OK && (*aRetValue)->Initialize() == S_OK)
+        if (TlsSetValue(tId, (LPVOID)(*aRetValue)))
+            return TRUE;
+
+    // Either CoCreate or TlsSetValue failed; so return FALSE
+
+    if ((*aRetValue))
+        (*aRetValue)->Release();
+
+            ::CoUninitialize();
+    return FALSE;
+}
+
+////////////////////////////////////////////////////////////////////////////////////////
+// The MAPILogon function begins a Simple MAPI session, loading the default message ////
+// store and address book providers                            ////
+////////////////////////////////////////////////////////////////////////////////////////
+
+ULONG FAR PASCAL MAPILogon(ULONG aUIParam, LPTSTR aProfileName,
+                            LPTSTR aPassword, FLAGS aFlags,
+                            ULONG aReserved, LPLHANDLE aSession)
+{
+    HRESULT hr = 0;
+    ULONG nSessionId = 0;
+    nsIMapi *pNsMapi = NULL;
+
+    if (!InitMozillaReference(&pNsMapi))
+        return MAPI_E_FAILURE;
+
+    if (!(aFlags & MAPI_UNICODE))
+    {
+        // Need to convert the parameters to Unicode.
+
+        char *pUserName = (char *) aProfileName;
+        char *pPassWord = (char *) aPassword;
+
+        TCHAR ProfileName[MAX_NAME_LEN] = {0};
+        TCHAR PassWord[MAX_PW_LEN] = {0};
+
+        if (pUserName != NULL)
+        {
+            if (!MultiByteToWideChar(CP_ACP, 0, pUserName, -1, ProfileName,
+                                                            MAX_NAME_LEN))
+                return MAPI_E_FAILURE;
+        }
+
+        if (pPassWord != NULL)
+        {
+            if (!MultiByteToWideChar(CP_ACP, 0, pPassWord, -1, PassWord,
+                                                            MAX_NAME_LEN))
+                return MAPI_E_FAILURE;
+        }
+
+        hr = pNsMapi->Login(aUIParam, ProfileName, PassWord, aFlags,
+                                                        &nSessionId);
+    }
+    else
+        hr = pNsMapi->Login(aUIParam, aProfileName, aPassword,
+                                                aFlags, &nSessionId);
+    if (hr == S_OK)
+        (*aSession) = (LHANDLE) nSessionId;
+    else
+        return nSessionId;
+
+    return SUCCESS_SUCCESS;
+}
+
+ULONG FAR PASCAL MAPILogoff (LHANDLE aSession, ULONG aUIParam,
+                                            FLAGS aFlags, ULONG aReserved)
+{
+    nsIMapi *pNsMapi = (nsIMapi *)TlsGetValue(tId);
+    if (pNsMapi != NULL)
+    {
+        if (pNsMapi->Logoff((ULONG) aSession) == S_OK)
+            pNsMapi->Release();
+        pNsMapi = NULL;
+    }
+
+    TlsSetValue(tId, NULL);
+
+    ::CoUninitialize();
+
+    return SUCCESS_SUCCESS;
+}
+
+ULONG FAR PASCAL MAPISendMail (LHANDLE lhSession, ULONG ulUIParam, lpnsMapiMessage lpMessage,
+                FLAGS flFlags, ULONG ulReserved )
+{
+    HRESULT hr = 0;
+    BOOL bTempSession = FALSE ;
+    nsIMapi *pNsMapi = NULL;
+
+    if (!InitMozillaReference(&pNsMapi))
+        return MAPI_E_FAILURE;
+
+    if (lpMessage->nRecipCount > MAX_RECIPS)
+        return MAPI_E_TOO_MANY_RECIPIENTS ;
+
+    if (lpMessage->nFileCount > MAX_FILES)
+        return MAPI_E_TOO_MANY_FILES ;
+
+    if ( (!(flFlags & MAPI_DIALOG)) && (lpMessage->lpRecips == NULL) )
+        return MAPI_E_UNKNOWN_RECIPIENT ;
+
+    if (!lhSession || pNsMapi->IsValidSession(lhSession) != S_OK)
+    {
+        FLAGS LoginFlag ;
+        if ( (flFlags & MAPI_LOGON_UI) && (flFlags & MAPI_NEW_SESSION) )
+            LoginFlag = MAPI_LOGON_UI | MAPI_NEW_SESSION ;
+        else if (flFlags & MAPI_LOGON_UI) 
+            LoginFlag = MAPI_LOGON_UI ;
+
+        hr = MAPILogon (ulUIParam, (LPTSTR) NULL, (LPTSTR) NULL, LoginFlag, 0, &lhSession) ;
+        if (hr != SUCCESS_SUCCESS)
+            return MAPI_E_LOGIN_FAILURE ;
+        bTempSession = TRUE ;
+    }
+
+    // we need to deal with null data passed in by MAPI clients, specially when MAPI_DIALOG is set.
+    // The MS COM type lib code generated by MIDL for the MS COM interfaces checks for these parameters
+    // to be non null, although null is a valid value for them here. 
+    nsMapiRecipDesc * lpRecips ;
+    nsMapiFileDesc * lpFiles ;
+
+    nsMapiMessage Message ;
+    memset (&Message, 0, sizeof (nsMapiMessage) ) ;
+    nsMapiRecipDesc Recipient ;
+    memset (&Recipient, 0, sizeof (nsMapiRecipDesc) );
+    nsMapiFileDesc Files ;
+    memset (&Files, 0, sizeof (nsMapiFileDesc) ) ;
+
+    if(!lpMessage)
+    {
+       lpMessage = &Message ;
+    }
+    if(!lpMessage->lpRecips)
+    {
+        lpRecips = &Recipient ;
+    }
+    else
+        lpRecips = lpMessage->lpRecips ;
+    if(!lpMessage->lpFiles)
+    {
+        lpFiles = &Files ;
+    }
+    else
+        lpFiles = lpMessage->lpFiles ;
+
+    hr = pNsMapi->SendMail (lhSession, lpMessage, 
+                            (short) lpMessage->nRecipCount, lpRecips,
+                            (short) lpMessage->nFileCount, lpFiles,
+                            flFlags, ulReserved);
+
+    if (bTempSession)
+        MAPILogoff (lhSession, ulUIParam, 0,0) ;
+
+    // we are seeing a problem when using Word, although we return success from the MAPI support
+    // MS COM interface in mozilla, we are getting this error here. This is a temporary hack !!
+    if (hr == 0x800703e6)
+        return SUCCESS_SUCCESS;
+    
+    return hr ; 
+}
+
+
+ULONG FAR PASCAL MAPISendDocuments(ULONG ulUIParam, LPTSTR lpszDelimChar, LPTSTR lpszFilePaths,
+                                LPTSTR lpszFileNames, ULONG ulReserved)
+{
+    LHANDLE lhSession ;
+    nsIMapi *pNsMapi = NULL;
+
+    if (!InitMozillaReference(&pNsMapi))
+        return MAPI_E_FAILURE;
+
+    unsigned long result = MAPILogon (ulUIParam, (LPTSTR) NULL, (LPTSTR) NULL, MAPI_LOGON_UI, 0, &lhSession) ;
+    if (result != SUCCESS_SUCCESS)
+        return MAPI_E_LOGIN_FAILURE ;
+
+    HRESULT hr;
+
+    hr = pNsMapi->SendDocuments(lhSession, (LPTSTR) lpszDelimChar, (LPTSTR) lpszFilePaths, 
+                                    (LPTSTR) lpszFileNames, ulReserved) ;
+
+    MAPILogoff (lhSession, ulUIParam, 0,0) ;
+
+    return hr ;
+}
+
+ULONG FAR PASCAL MAPIFindNext(LHANDLE lhSession, ULONG ulUIParam, LPTSTR lpszMessageType,
+                              LPTSTR lpszSeedMessageID, FLAGS flFlags, ULONG ulReserved,
+                              LPTSTR lpszMessageID)
+{
+    return MAPI_E_FAILURE;
+}
+
+ULONG FAR PASCAL MAPIReadMail(LHANDLE lhSession, ULONG ulUIParam, LPTSTR lpszMessageID,
+                              FLAGS flFlags, ULONG ulReserved, lpMapiMessage FAR *lppMessage)
+{
+    return MAPI_E_FAILURE;
+}
+
+ULONG FAR PASCAL MAPISaveMail(LHANDLE lhSession, ULONG ulUIParam, lpMapiMessage lpMessage,
+                              FLAGS flFlags, ULONG ulReserved, LPTSTR lpszMessageID)
+{
+    return MAPI_E_FAILURE;
+}
+
+ULONG FAR PASCAL MAPIDeleteMail(LHANDLE lhSession, ULONG ulUIParam, LPTSTR lpszMessageID,
+                                FLAGS flFlags, ULONG ulReserved)
+{
+    return MAPI_E_FAILURE;
+}
+
+ULONG FAR PASCAL MAPIAddress(LHANDLE lhSession, ULONG ulUIParam, LPTSTR lpszCaption,
+                             ULONG nEditFields, LPTSTR lpszLabels, ULONG nRecips,
+                             lpMapiRecipDesc lpRecips, FLAGS flFlags,
+                             ULONG ulReserved, LPULONG lpnNewRecips,
+                             lpMapiRecipDesc FAR *lppNewRecips)
+{
+    return MAPI_E_FAILURE;
+}
+
+ULONG FAR PASCAL MAPIDetails(LHANDLE lhSession, ULONG ulUIParam, lpMapiRecipDesc lpRecip,
+                             FLAGS flFlags, ULONG ulReserved)
+{
+    return MAPI_E_FAILURE;
+}
+
+ULONG FAR PASCAL MAPIResolveName(LHANDLE lhSession, ULONG ulUIParam, LPTSTR lpszName,
+                                 FLAGS flFlags, ULONG ulReserved, lpMapiRecipDesc FAR *lppRecip)
+{
+    return MAPI_E_FAILURE;
+}
+
+ULONG FAR PASCAL MAPIFreeBuffer(LPVOID pv)
+{
+    return MAPI_E_FAILURE;
+}
+
+ULONG FAR PASCAL GetMapiDllVersion()
+{
+    return 94;
+}
+
+
+
+

mozilla/mailnews/mapi/mapiDll/makefile.win

@@ -0,0 +1,61 @@
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is Mozilla.
+#
+# The Initial Developer of the Original Code is
+# Netscape Communications Corp.
+# Portions created by the Initial Developer are Copyright (C) 2001
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s): Krishna Mohan Khandrika (kkhandrika@netscape.com)
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either the GNU General Public License Version 2 or later (the "GPL"), or
+# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK ***** 
+
+DEPTH=..\..\..
+
+MODULE          = mozMapi32
+EXPORT_LIBRARY  = $(MODULE)
+LIBRARY_NAME    = $(MODULE)
+DEFFILE         = Mapi32.def
+
+REQUIRES	= MapiProxy \
+                  msgMapi \
+		  xpcom \
+		  string \
+		  $(NULL)
+
+include <$(DEPTH)\config\config.mak>
+###############################################################
+
+LCFLAGS=-DUNICODE -D_UNICODE
+
+
+OBJS= .\$(OBJDIR)\MapiDll.obj
+
+WIN_LIBS= ole32.lib
+
+include <$(DEPTH)\config\rules.mak>
+

mozilla/mailnews/mapi/mapihook/makefile.win

@@ -0,0 +1,26 @@
+#!nmake
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s):  kkhandrika@netscape.com
+
+DEPTH=..\..\..
+
+DIRS= build public src
+
+include <$(DEPTH)\config\rules.mak>

mozilla/mailnews/mapi/mapihook/public/nsIMapiSupport.idl

@@ -0,0 +1,64 @@
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 2001
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ * Krishna Mohan Khandrika <kkhandrika@netscape.com>
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#include "nsISupports.idl"
+
+/**
+ * This interface provides support for registering Mozilla as a COM component
+ * for extending the use of Mail/News through Simple MAPI.
+ * 
+ */
+
+[noscript, uuid(8967fed2-c8bb-11d5-a3e9-00b0d0f3baa7)]
+interface nsIMapiSupport : nsISupports {
+
+   /** Initiates MAPI support
+    */
+
+   void initializeMAPISupport();
+
+   /**  Shuts down the MAPI support
+    */
+
+   void shutdownMAPISupport();
+};
+
+%{C++
+#define NS_IMAPISUPPORT_CONTRACTID    "@mozilla.org/mapisupport;1"
+#define NS_IMAPISUPPORT_CLASSNAME "Mozilla MAPI Support"
+%}
+

mozilla/mailnews/mapi/mapihook/src/nsMapiSupport.cpp

@@ -0,0 +1,174 @@
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is Mozilla
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corp.
+ * Portions created by the Initial Developer are Copyright (C) 2001
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s): Krishna Mohan Khandrika (kkhandrika@netscape.com)
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#include "nsComPtr.h"
+#include "nsMapiSupport.h"
+#include "nsISupports.h"
+#include "nsMapiRegistry.h"
+#include "nsIGenericFactory.h"
+#include "nsIObserverService.h"
+#include "nsIAppStartupNotifier.h"
+#include "nsIServiceManager.h"
+#include "nsIComponentManager.h"
+#include "nsICategoryManager.h"
+
+const CLSID CLSID_nsMapiImp = {0x29f458be, 0x8866, 0x11d5, \
+                              {0xa3, 0xdd, 0x0, 0xb0, 0xd0, 0xf3, 0xba, 0xa7}};
+
+/** Implementation of the nsIMapiSupport interface.
+ *  Use standard implementation of nsISupports stuff.
+ */
+
+NS_IMPL_THREADSAFE_ISUPPORTS2(nsMapiSupport, nsIMapiSupport, nsIObserver);
+
+static NS_METHOD nsMapiRegistrationProc(nsIComponentManager *aCompMgr,
+                   nsIFile *aPath, const char *registryLocation, const char *componentType,
+                   const nsModuleComponentInfo *info)
+{
+  nsresult rv;
+
+  nsCOMPtr<nsICategoryManager> categoryManager(do_GetService(NS_CATEGORYMANAGER_CONTRACTID, &rv));
+  if (NS_SUCCEEDED(rv)) 
+      rv = categoryManager->AddCategoryEntry(APPSTARTUP_CATEGORY, "Mapi Support", 
+                  "service," NS_IMAPISUPPORT_CONTRACTID, PR_TRUE, PR_TRUE, nsnull);
+
+  return rv;
+}
+
+NS_IMETHODIMP
+nsMapiSupport::Observe(nsISupports *aSubject, const char *aTopic, const PRUnichar *aData)
+{
+    if (!nsCRT::strcmp(aTopic, "profile-after-change"))
+        return InitializeMAPISupport();
+
+    if (!nsCRT::strcmp(aTopic, NS_XPCOM_SHUTDOWN_OBSERVER_ID))
+        return ShutdownMAPISupport();
+
+    nsresult rv;
+
+    nsCOMPtr<nsIObserverService> observerService(do_GetService("@mozilla.org/observer-service;1", &rv));
+    if (NS_FAILED(rv)) return rv;
+
+    rv = observerService->AddObserver(this,"profile-after-change", PR_FALSE);
+    if (NS_FAILED(rv)) return rv;
+
+    rv = observerService->AddObserver(this, NS_XPCOM_SHUTDOWN_OBSERVER_ID, PR_FALSE);
+           
+    return rv;
+}
+
+nsMapiSupport::nsMapiSupport()
+: m_dwRegister(0),
+  m_nsMapiFactory(nsnull)
+{
+    NS_INIT_ISUPPORTS();
+}
+
+nsMapiSupport::~nsMapiSupport()
+{
+}
+
+NS_IMETHODIMP
+nsMapiSupport::InitializeMAPISupport()
+{
+    ::CoInitialize(nsnull);
+    if (m_nsMapiFactory == nsnull)    // No Registering if already done.  Sanity Check!!
+    {
+        m_nsMapiFactory = new nsMapiFactory();
+
+        if (m_nsMapiFactory != nsnull)
+        {
+            HRESULT hr = ::CoRegisterClassObject(CLSID_nsMapiImp, \
+                                                 m_nsMapiFactory, \
+                                                 CLSCTX_LOCAL_SERVER, \
+                                                 REGCLS_MULTIPLEUSE, \
+                                                 &m_dwRegister);
+
+            if (FAILED(hr))
+            {
+                m_nsMapiFactory->Release() ;
+                m_nsMapiFactory = nsnull;
+                return NS_ERROR_FAILURE;
+            }
+        }
+    }
+
+    return NS_OK;
+}
+
+NS_IMETHODIMP
+nsMapiSupport::ShutdownMAPISupport()
+{
+    if (m_dwRegister != 0)
+        ::CoRevokeClassObject(m_dwRegister);
+
+    if (m_nsMapiFactory != nsnull)
+    {
+        m_nsMapiFactory->Release();
+        m_nsMapiFactory = nsnull;
+    }
+
+    ::CoUninitialize();
+
+    return NS_OK;
+}
+
+
+NS_GENERIC_FACTORY_CONSTRUCTOR(nsMapiRegistry);
+NS_GENERIC_FACTORY_CONSTRUCTOR(nsMapiSupport);
+
+// The list of components we register
+static nsModuleComponentInfo components[] = 
+{
+  {
+    NS_IMAPIREGISTRY_CLASSNAME, 
+    NS_IMAPIREGISTRY_CID,
+    NS_IMAPIREGISTRY_CONTRACTID, 
+    nsMapiRegistryConstructor
+  },
+
+  {
+    NS_IMAPISUPPORT_CLASSNAME,
+    NS_IMAPISUPPORT_CID,
+    NS_IMAPISUPPORT_CONTRACTID,
+    nsMapiSupportConstructor,
+    nsMapiRegistrationProc,
+    nsnull
+  }
+};
+
+NS_IMPL_NSGETMODULE(msgMapiModule, components);
+

mozilla/mailnews/mapi/mapihook/src/nsMapiSupport.h

@@ -0,0 +1,67 @@
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is Mozilla
+ *
+ * The Initial Developer of the Original Code is 
+ # Netscape Communications Corp.
+ * Portions created by the Initial Developer are Copyright (C) 2001
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s): Krishna Mohan Khandrika (kkhandrika@netscape.com)
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#ifndef NS_MAPI_SUPPORT_H_
+#define NS_MAPI_SUPPORT_H_
+
+#include <nsIObserver.h>
+#include <nsIMapiSupport.h>
+#include "msgMapiFactory.h"
+
+
+#define NS_IMAPISUPPORT_CID \
+  {0x8967fed2, 0xc8bb, 0x11d5, \
+    { 0xa3, 0xe9, 0x00, 0xb0, 0xd0, 0xf3, 0xba, 0xa7 }}
+
+class nsMapiSupport : public nsIMapiSupport, public nsIObserver
+{
+    public :
+
+        nsMapiSupport();
+        ~nsMapiSupport();
+
+        // Declare all interface methods we must implement.
+        NS_DECL_ISUPPORTS
+        NS_DECL_NSIOBSERVER
+        NS_DECL_NSIMAPISUPPORT
+
+    private :
+
+        DWORD   m_dwRegister;
+        nsMapiFactory *m_nsMapiFactory;
+};
+
+#endif  // NS_MAPI_SUPPORT_H_

mozilla/mailnews/mapi/old/hook/makefile.win

@@ -0,0 +1,64 @@
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#
+
+DEPTH=..\..\..
+MODULE=mapiguts
+
+################################################################################
+## exports
+
+#EXPORTS =
+
+
+################################################################################
+## library
+
+LIBNAME = .\$(OBJDIR)\mapiguts
+
+!ifdef MOZ_STATIC_COMPONENT_LIBS
+LIB = $(LIBNAME).lib
+!else
+DLL = $(LIBNAME).dll
+!endif
+
+DEFINES= -NS_DEBUG
+
+OBJS=										\
+    .\$(OBJDIR)\mapihook.obj  \
+    .\$(OBJDIR)\mapimail.obj  \
+		$(NULL)
+
+LLIBS=										\
+			$(LLIBS)						\
+			$(LIBNSPR)						\
+			$(DIST)\lib\xppref32.lib		\
+			$(DIST)\lib\xpcom.lib       	\
+			$(DIST)\lib\mapiutils_s.lib  \
+			$(NULL)
+
+include <$(DEPTH)\config\rules.mak>
+
+!ifdef MOZ_STATIC_COMPONENT_LIBS
+install:: $(LIb)
+	$(MAKE_INSTALL)  $(LIBNAME).$(LIB_SUFFIX) $(DIST)\bin\components
+!else
+install:: $(DLL)
+	$(MAKE_INSTALL)  $(LIBNAME).$(DLL_SUFFIX) $(DIST)\bin\components
+!endif

mozilla/mailnews/mapi/old/hook/mapihook.h

@@ -0,0 +1,48 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+#ifndef _MAPI_HOOK_H_
+#define _MAPI_HOOK_H_
+
+#include <structs.h>    // for MWContext
+
+//
+// This is the entry point to the MAPI session manager that lives
+// inside of Communicator.
+// 
+LONG ProcessNetscapeMAPIHook(WPARAM wParam, LPARAM lParam);
+
+#endif // _MAPI_HOOK_H_

mozilla/mailnews/mapi/old/hook/mapimail.cpp

@@ -0,0 +1,853 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+//  More MAPI Hooks for Communicator
+//  Written by: Rich Pizzarro (rhp@netscape.com)
+//  November 1997
+//
+#include "windows.h"
+#include "template.h"
+#include "msgcom.h"
+#include "wfemsg.h"
+#include "compstd.h"
+#include "compbar.h"
+#include "compmisc.h"
+#include "compfrm.h"
+#include "prefapi.h"
+#include "intl_csi.h"
+#include "dlghtmrp.h"
+#include "dlghtmmq.h"
+
+// rhp - was breaking the optimized build!
+//#include "edt.h"
+//#include "edview.h"
+//#include "postal.h"
+//#include "apiaddr.h"
+//#include "mailmisc.h"
+
+extern "C" {
+#include "xpgetstr.h"
+extern int MK_MSG_MSG_COMPOSITION;
+};
+
+#include "mapimail.h"
+#include "nscpmapi.h"
+#include "mailpriv.h"
+#include "nsstrseq.h"
+
+MWContext             
+*GetUsableContext(void)
+{
+  CGenericFrame     *pFrame = (CGenericFrame * )FEU_GetLastActiveFrame();
+
+  ASSERT(pFrame != NULL);
+  if (pFrame == NULL)
+  {
+    return(NULL);
+  }
+
+  // Now return the context...
+  return((MWContext *) pFrame->GetMainContext());
+}
+
+//
+// This function will create a composition window and either do
+// a blind send or pop up the compose window for the user to 
+// complete the operation
+//
+// Return: appropriate MAPI return code...
+//
+// 
+extern "C" LONG
+DoFullMAPIMailOperation(MAPISendMailType      *sendMailPtr,
+											  const char            *pInitialText,
+                        BOOL                  winShowFlag)
+{   
+CGenericDoc             *pDocument;
+LPSTR                   subject;
+NSstringSeq             mailInfoSeq;
+DWORD                   stringCount = 6;
+DWORD                   i;
+CString                 csDefault;
+
+  // Get a context to use for this call...
+  MWContext *pOldContext = GetUsableContext();
+  if (!pOldContext)
+  {
+    return(MAPI_E_FAILURE);
+  }
+
+  // Don't allow a compose window to be created if the user hasn't 
+  // specified an email address
+  const char *real_addr = FE_UsersMailAddress();
+  if (MISC_ValidateReturnAddress(pOldContext, real_addr) < 0)
+  {
+    return(MAPI_E_FAILURE);
+  }
+
+  //
+  // Now, we must build the fields object...
+  //
+  mailInfoSeq = (NSstringSeq) &(sendMailPtr->dataBuf[0]);
+  subject = NSStrSeqGet(mailInfoSeq, 0);
+
+  // We should give it a subject to preven the prompt from coming
+  // up...
+  if ((!subject) || !(*subject))
+  {
+    csDefault.LoadString(IDS_COMPOSE_DEFAULTNOSUBJECT);
+    subject = csDefault.GetBuffer(2);
+  }
+
+  TRACE("MAPI: ProcessMAPISendMail() Subject   = [%s]\n", subject);
+  TRACE("MAPI: ProcessMAPISendMail() Text Size = [%d]\n", strlen((const char *)pInitialText));
+  TRACE("MAPI: ProcessMAPISendMail() # of Recipients  = [%d]\n", sendMailPtr->MSG_nRecipCount);
+
+
+  char  toString[1024] = "";
+  char  ccString[1024] = "";
+  char  bccString[1024] = "";
+
+  for (i=0; i<sendMailPtr->MSG_nRecipCount; i++)
+  {
+    LPSTR   ptr;
+    UCHAR   tempString[256];
+
+    ULONG addrType = atoi(NSStrSeqGet(mailInfoSeq, stringCount++));
+
+    // figure which type of address this is?
+    if (addrType == MAPI_CC)
+      ptr = ccString;
+    else if (addrType == MAPI_BCC)
+      ptr = bccString;
+    else
+      ptr = toString;
+      
+    LPSTR namePtr = (LPSTR) NSStrSeqGet(mailInfoSeq, stringCount++);
+    LPSTR emailPtr = (LPSTR) NSStrSeqGet(mailInfoSeq, stringCount++);
+    if ( (lstrlen(emailPtr) > 5) && (*(emailPtr + 4) == ':') )
+    {
+      emailPtr += 5;
+    }
+
+    // Now build the temp string to tack on in the format
+    // "Rich Pizzarro" <rhp@netscape.com>
+    wsprintf((LPSTR) tempString, "\"%s\" <%s>", namePtr, emailPtr);
+
+    // add a comma if not the first one
+    if (ptr[0] != '\0')
+      lstrcat(ptr, ",");
+
+    // tack on string!
+    lstrcat(ptr, (LPSTR) tempString);
+  }
+
+  BOOL    bEncrypt = FALSE;
+  BOOL    bSign    = FALSE;
+
+  PREF_GetBoolPref("mail.crypto_sign_outgoing_mail", &bSign);
+  PREF_GetBoolPref("mail.encrypt_outgoing_mail", &bEncrypt);
+  MSG_CompositionFields *fields =
+      MSG_CreateCompositionFields(real_addr, real_addr, 
+                  toString, 
+                  ccString, 
+                  bccString,
+									"", "", "",
+									"", subject, "",
+									"", "", "",
+									"", 
+                  bEncrypt,
+                  bSign);
+  if (!fields)
+  {
+    return(MAPI_E_FAILURE);
+  }
+
+  // RICHIE
+  // INTL_CharSetInfo csi = LO_GetDocumentCharacterSetInfo(pOldContext);
+  // int16 win_csid = INTL_GetCSIWinCSID(csi);
+  
+  pDocument = (CGenericDoc*)theApp.m_TextComposeTemplate->OpenDocumentFile(NULL, NULL, /*win_csid RICHIE*/ winShowFlag);
+  if ( !pDocument )
+  {
+    return(MAPI_E_FAILURE);
+  }
+  
+  CWinCX * pContext = (CWinCX*) pDocument->GetContext();
+  if ( !pContext ) 
+  {
+    return(MAPI_E_FAILURE);
+  }
+
+  MSG_CompositionPaneCallbacks Callbacks;
+  Callbacks.CreateRecipientsDialog = CreateRecipientsDialog;
+  Callbacks.CreateAskHTMLDialog = CreateAskHTMLDialog;
+
+  int16 doccsid;
+  MWContext *context = pContext->GetContext();
+  CComposeFrame *pCompose = (CComposeFrame *) pContext->GetFrame()->GetFrameWnd();
+
+  pCompose->SetComposeStuff(context, fields); // squirl away stuff for post-create
+
+  // This needs to be set TRUE if using the old non-HTML text frame
+  // to prevent dropping dragged URLs
+  pContext->m_bDragging = !pCompose->UseHtml();
+  if (!pCompose->UseHtml()) 
+  {
+    pCompose->SetMsgPane(
+      MSG_CreateCompositionPane(pContext->GetContext(), 
+                                context, 
+                                g_MsgPrefs.m_pMsgPrefs, 
+                                fields,
+                                WFE_MSGGetMaster())
+                        );
+  }
+
+  ASSERT(pCompose->GetMsgPane());
+  MSG_SetFEData(pCompose->GetMsgPane(),(void *)pCompose);  
+  pCompose->UpdateAttachmentInfo();
+
+  // Pass doccsid info to new context for MailToWin conversion
+  doccsid = INTL_GetCSIDocCSID(LO_GetDocumentCharacterSetInfo(context));
+  INTL_SetCSIDocCSID(LO_GetDocumentCharacterSetInfo(context), 
+    (doccsid ? doccsid : INTL_DefaultDocCharSetID(context)));
+
+  pCompose->DisplayHeaders(NULL);
+
+  CComposeBar * pBar = pCompose->GetComposeBar();
+  ASSERT(pBar);
+  LPADDRESSCONTROL pIAddressList = pBar->GetAddressWidgetInterface();
+
+  if (!pIAddressList->IsCreated()) 
+  {
+    pBar->CreateAddressingBlock();
+  }
+
+  // rhp - Deal with addressing the brute force way! This is a 
+  // "fix" for bad behavior when creating these windows and not
+  // showing them on the desktop.
+  if (!winShowFlag)      // Hack to fix the window not being mapped
+  {
+    pCompose->AppendAddress(MSG_TO_HEADER_MASK, "");
+    pCompose->AppendAddress(MSG_CC_HEADER_MASK, "");
+    pCompose->AppendAddress(MSG_BCC_HEADER_MASK, "");
+  }
+
+  // Always do plain text composition!
+  pCompose->CompleteComposeInitialization();
+
+  // Do this so we don't get popups on "empty" messages
+  if ( (!pInitialText) || (!(*pInitialText)) )
+    pInitialText = " ";
+
+  const char * pBody = pInitialText ? pInitialText : MSG_GetCompBody(pCompose->GetMsgPane());
+  if (pBody)
+  {
+    FE_InsertMessageCompositionText(context,pBody,TRUE);
+  }
+
+  // 
+  // Now set the message as being edited!    
+  //
+  pCompose->SetModified(TRUE);
+
+  //
+  // Finally deal with the attachments...
+  //
+  if (sendMailPtr->MSG_nFileCount > 0)
+  {
+    // Send this puppy when done with the attachments...
+    if (!winShowFlag)
+    {
+      pCompose->SetMAPISendMode(MAPI_SEND);
+    }
+
+    MSG_AttachmentData *pAttach = (MSG_AttachmentData *)
+                  XP_CALLOC((sendMailPtr->MSG_nFileCount + 1),
+                  sizeof(MSG_AttachmentData));
+    if (!pAttach)
+    {
+      return(MAPI_E_INSUFFICIENT_MEMORY);
+    }
+
+    memset(pAttach, 0, (sendMailPtr->MSG_nFileCount + 1) * 
+                                sizeof(MSG_AttachmentData));
+    for (i=0; i<sendMailPtr->MSG_nFileCount; i++)
+    {
+      CString cs;
+      // Create URL from filename...
+      WFE_ConvertFile2Url(cs, 
+          (const char *)NSStrSeqGet(mailInfoSeq, stringCount++));
+      pAttach[i].url = XP_STRDUP(cs);
+
+      // Now also include the "display" name...
+      StrAllocCopy(pAttach[i].real_name, NSStrSeqGet(mailInfoSeq, stringCount++));
+    }
+
+    // Set the list!
+    MSG_SetAttachmentList(pCompose->GetMsgPane(), pAttach);
+
+    // Now free everything...
+    for (i=0; i<sendMailPtr->MSG_nFileCount; i++)
+    {
+      if (pAttach[i].url)
+        XP_FREE(pAttach[i].url);
+
+      if (pAttach[i].real_name)
+        XP_FREE(pAttach[i].real_name);
+    }
+
+    XP_FREE(pAttach);
+  }
+
+  //
+  // Now, if we were supposed to do the blind send...do it, otherwise,
+  // just popup the window...
+  //
+  if (winShowFlag)      
+  {
+    // Post message to compose window to set the initial focus.
+    pCompose->PostMessage(WM_COMP_SET_INITIAL_FOCUS);
+  }
+  else if (sendMailPtr->MSG_nFileCount <= 0)  // Send NOW if no attachments!
+  {
+    pCompose->PostMessage(WM_COMMAND, IDM_SEND);
+  }
+
+  return(SUCCESS_SUCCESS);
+}
+
+//
+// This function will create a composition window and just attach
+// the attachments of interest and pop up the window...
+//
+// Return: appropriate MAPI return code...
+//
+//
+extern "C" LONG
+DoPartialMAPIMailOperation(MAPISendDocumentsType *sendDocPtr)
+{   
+CGenericDoc             *pDocument;
+
+  // Get a context to use for this call...
+  MWContext *pOldContext = GetUsableContext();
+  if (!pOldContext)
+  {
+    return(MAPI_E_FAILURE);
+  }
+
+  // Don't allow a compose window to be created if the user hasn't 
+  // specified an email address
+  const char *real_addr = FE_UsersMailAddress();
+  if (MISC_ValidateReturnAddress(pOldContext, real_addr) < 0)
+  {
+    return(MAPI_E_FAILURE);
+  }
+
+  //
+  // Now, build the fields object w/o much info...
+  //
+  BOOL    bEncrypt = FALSE;
+  BOOL    bSign    = FALSE;
+
+  PREF_GetBoolPref("mail.crypto_sign_outgoing_mail", &bSign);
+  PREF_GetBoolPref("mail.encrypt_outgoing_mail", &bEncrypt);
+
+  MSG_CompositionFields *fields =
+      MSG_CreateCompositionFields(real_addr, real_addr, NULL, 
+                  "", "",
+									"", "", "",
+									"", "", "",
+									"", "", "",
+									"", 
+                  bEncrypt,
+                  bSign);
+  if (!fields)
+  {
+    return(MAPI_E_FAILURE);
+  }
+
+  // RICHIE - INTL_CharSetInfo csi = LO_GetDocumentCharacterSetInfo(pOldContext);
+  // int16 win_csid = INTL_GetCSIWinCSID(csi);
+
+  pDocument = (CGenericDoc*)theApp.m_TextComposeTemplate->OpenDocumentFile(NULL, NULL, /*RICHIE win_csid,*/ TRUE);
+  if ( !pDocument )
+  {
+    // cleanup fields object
+    MSG_DestroyCompositionFields(fields);
+    return(MAPI_E_FAILURE);
+  }
+
+  CWinCX * pContext = (CWinCX*) pDocument->GetContext();
+  if ( !pContext ) 
+  {
+    return(MAPI_E_FAILURE);
+  }
+
+  MSG_CompositionPaneCallbacks Callbacks;
+  Callbacks.CreateRecipientsDialog = CreateRecipientsDialog;
+  Callbacks.CreateAskHTMLDialog = CreateAskHTMLDialog;
+
+  MWContext *context = pContext->GetContext();
+  CComposeFrame *pCompose = (CComposeFrame *) pContext->GetFrame()->GetFrameWnd();
+  pCompose->SetComposeStuff(context,fields); // squirl away stuff for post-create
+
+  // This needs to be set TRUE if using the old non-HTML text frame
+  // to prevent dropping dragged URLs
+  pContext->m_bDragging = !pCompose->UseHtml();
+  if (!pCompose->UseHtml()) 
+  {
+    pCompose->SetMsgPane(MSG_CreateCompositionPane(
+      pContext->GetContext(), 
+      context,
+      g_MsgPrefs.m_pMsgPrefs, fields,
+      WFE_MSGGetMaster()));
+  }
+
+  ASSERT(pCompose->GetMsgPane());
+  MSG_SetFEData(pCompose->GetMsgPane(),(void *)pCompose);
+
+  pCompose->UpdateAttachmentInfo();
+
+  // Pass doccsid info to new context for MailToWin conversion
+  /***
+  doccsid = INTL_GetCSIDocCSID(LO_GetDocumentCharacterSetInfo(pOldContext));
+
+  INTL_SetCSIDocCSID(LO_GetDocumentCharacterSetInfo(context), 
+    (doccsid ? doccsid : INTL_DefaultDocCharSetID(pOldContext)));
+  ****/
+
+  pCompose->DisplayHeaders(NULL);
+
+  CComposeBar * pBar = pCompose->GetComposeBar();
+  ASSERT(pBar);
+  LPADDRESSCONTROL pIAddressList = pBar->GetAddressWidgetInterface();
+
+  if (!pIAddressList->IsCreated()) 
+  {
+    pBar->CreateAddressingBlock();
+  }
+
+  // Always do plain text composition!
+  pCompose->CompleteComposeInitialization();
+
+  //
+  // Finally deal with the attachments...
+  //
+  NSstringSeq     mailInfoSeq = (NSstringSeq) &(sendDocPtr->dataBuf[0]);
+  DWORD           stringCount = 0;
+  DWORD           i;
+
+  TRACE("MAPI: ProcessMAPISendDocuments() # of Attachments = [%d]\n", sendDocPtr->nFileCount);
+
+  if (sendDocPtr->nFileCount > 0)
+  {
+      MSG_AttachmentData *pAttach = (MSG_AttachmentData *)
+                    XP_CALLOC((sendDocPtr->nFileCount + 1),
+                    sizeof(MSG_AttachmentData));
+      if (!pAttach)
+      {
+        return(MAPI_E_INSUFFICIENT_MEMORY);
+      }
+
+      memset(pAttach, 0, (sendDocPtr->nFileCount + 1) * 
+                                  sizeof(MSG_AttachmentData));
+      for (i=0; i<sendDocPtr->nFileCount; i++)
+      {
+        CString cs;
+        // Create URL from filename...
+        WFE_ConvertFile2Url(cs, 
+            (const char *)NSStrSeqGet(mailInfoSeq, stringCount++));
+        pAttach[i].url = XP_STRDUP(cs);
+
+        // Now also include the "display" name...
+        StrAllocCopy(pAttach[i].real_name, NSStrSeqGet(mailInfoSeq, stringCount++));
+      }
+
+      // Set the list!
+      MSG_SetAttachmentList(pCompose->GetMsgPane(), pAttach);
+
+      // Now free everything...
+      for (i=0; i<sendDocPtr->nFileCount; i++)
+      {
+        if (pAttach[i].url)
+          XP_FREE(pAttach[i].url);
+
+        if (pAttach[i].real_name)
+          XP_FREE(pAttach[i].real_name);
+      }
+
+      XP_FREE(pAttach);
+  }
+    
+  // 
+  // Now some checking for ... well I'm not sure...
+  //
+  if (MSG_GetAttachmentList(pCompose->GetMsgPane()))
+    pCompose->SetModified(TRUE);
+  else
+    pCompose->SetModified(FALSE);
+
+  // Post message to compose window to set the initial focus.
+  pCompose->PostMessage(WM_COMP_SET_INITIAL_FOCUS);
+
+  //
+  // Now, just popup the window...
+  //
+  pCompose->ShowWindow(TRUE);
+
+  // return pCompose->GetMsgPane(); rhp - used to return the MsgPane
+  return(SUCCESS_SUCCESS);
+}
+
+static void _GetMailCallback(HWND hwnd, MSG_Pane *pane, void *closure)
+{
+   if (pane != NULL)
+   {
+     ShowWindow(hwnd, SW_HIDE);
+     MSG_Command( pane, MSG_GetNewMail, NULL, 0 );
+   }
+}
+
+static void _GetMailDoneCallback(HWND hwnd, MSG_Pane *pane, void *closure)
+{
+	for(CGenericFrame * f = theApp.m_pFrameList; f; f = f->m_pNext)
+		f->PostMessage(WM_COMMAND, (WPARAM) ID_DONEGETTINGMAIL, (LPARAM) 0);
+}
+
+//
+// This will fire off a "get mail in background operation" in an
+// async. fashion.
+//
+extern "C" void
+MAPIGetNewMessagesInBackground(void)
+{
+CGenericFrame     *pFrame = (CGenericFrame * )FEU_GetLastActiveFrame();
+
+  // rhp - we should not hit the net if we are offline!
+  if (NET_IsOffline())
+    return;
+
+  if (!pFrame)
+    return;
+
+  MWContext *pOldContext = GetUsableContext();
+  if (!pOldContext)
+    return;
+
+  TRACE("MAPI: DOWNLOAD MAIL IN BACKGROUND\n");
+  new CProgressDialog(
+                pFrame->GetFrameWnd(), 
+                NULL, 
+                _GetMailCallback, NULL, NULL, 
+                _GetMailDoneCallback);
+}
+
+//
+// This function will save a message into the Communicator "Drafts"
+// folder with no UI showing.
+//
+// Return: appropriate MAPI return code...
+//
+//
+extern "C" LONG 
+DoMAPISaveMailOperation(MAPISendMailType      *sendMailPtr,
+											  const char            *pInitialText)
+{
+CGenericDoc             *pDocument;
+LPSTR                   subject;
+NSstringSeq             mailInfoSeq;
+DWORD                   stringCount = 6;
+DWORD                   i;
+BOOL                    winShowFlag = FALSE;
+
+  // Get a context to use for this call...
+  MWContext *pOldContext = GetUsableContext();
+  if (!pOldContext)
+  {
+    return(MAPI_E_FAILURE);
+  }
+
+  // Don't allow a compose window to be created if the user hasn't 
+  // specified an email address
+  const char *real_addr = FE_UsersMailAddress();
+  if (MISC_ValidateReturnAddress(pOldContext, real_addr) < 0)
+  {
+    return(MAPI_E_FAILURE);
+  }
+
+  //
+  // Now, we must build the fields object...
+  //
+  mailInfoSeq = (NSstringSeq) &(sendMailPtr->dataBuf[0]);
+  subject = NSStrSeqGet(mailInfoSeq, 0);
+
+  TRACE("MAPI: ProcessMAPISendMail() Subject   = [%s]\n", subject);
+  TRACE("MAPI: ProcessMAPISendMail() Text Size = [%d]\n", strlen((const char *)pInitialText));
+  TRACE("MAPI: ProcessMAPISendMail() # of Recipients  = [%d]\n", sendMailPtr->MSG_nRecipCount);
+
+
+  char  toString[1024] = "";
+  char  ccString[1024] = "";
+  char  bccString[1024] = "";
+
+  for (i=0; i<sendMailPtr->MSG_nRecipCount; i++)
+  {
+    LPSTR   ptr;
+    UCHAR   tempString[256];
+
+    ULONG addrType = atoi(NSStrSeqGet(mailInfoSeq, stringCount++));
+
+    // figure which type of address this is?
+    if (addrType == MAPI_CC)
+      ptr = ccString;
+    else if (addrType == MAPI_BCC)
+      ptr = bccString;
+    else
+      ptr = toString;
+
+    LPSTR namePtr = (LPSTR) NSStrSeqGet(mailInfoSeq, stringCount++);
+    LPSTR emailPtr = (LPSTR) NSStrSeqGet(mailInfoSeq, stringCount++);
+
+    if ( (!emailPtr) && (!namePtr))
+    {
+      return(MAPI_E_INVALID_RECIPS);
+    }
+
+    if (!emailPtr)
+      emailPtr = namePtr;
+
+    char *tptr = strchr(emailPtr, ':');
+    if (tptr != NULL)
+    {
+      if ( (*tptr != '\0') && (*(tptr+1) != '\0') )
+      {
+        emailPtr = (tptr + 1);
+      }
+    }
+/**
+    if ( (lstrlen(emailPtr) > 5) && (*(emailPtr + 4) == ':') )
+    {
+      emailPtr += 5;
+    }
+**/
+    // Now build the temp string to tack on in the format
+    // "Rich Pizzarro" <rhp@netscape.com>
+    wsprintf((LPSTR) tempString, "\"%s\" <%s>", namePtr, emailPtr);
+
+    // add a comma if not the first one
+    if (ptr[0] != '\0')
+      lstrcat(ptr, ",");
+
+    // tack on string!
+    lstrcat(ptr, (LPSTR) tempString);
+  }
+
+  BOOL    bEncrypt = FALSE;
+  BOOL    bSign    = FALSE;
+
+  PREF_GetBoolPref("mail.crypto_sign_outgoing_mail", &bSign);
+  PREF_GetBoolPref("mail.encrypt_outgoing_mail", &bEncrypt);
+  MSG_CompositionFields *fields =
+      MSG_CreateCompositionFields(real_addr, real_addr, 
+                  toString, 
+                  ccString, 
+                  bccString,
+									"", "", "",
+									"", subject, "",
+									"", "", "",
+									"", 
+                  bEncrypt,
+                  bSign);
+  if (!fields)
+  {
+    return(MAPI_E_FAILURE);
+  }
+
+  // RICHIE
+  // INTL_CharSetInfo csi = LO_GetDocumentCharacterSetInfo(pOldContext);
+  // int16 win_csid = INTL_GetCSIWinCSID(csi);
+  
+  pDocument = (CGenericDoc*)theApp.m_TextComposeTemplate->OpenDocumentFile(NULL, NULL, /*win_csid RICHIE*/ winShowFlag);
+  if ( !pDocument )
+  {
+    return(MAPI_E_FAILURE);
+  }
+  
+  CWinCX * pContext = (CWinCX*) pDocument->GetContext();
+  if ( !pContext ) 
+  {
+    return(MAPI_E_FAILURE);
+  }
+
+  MSG_CompositionPaneCallbacks Callbacks;
+  Callbacks.CreateRecipientsDialog = CreateRecipientsDialog;
+  Callbacks.CreateAskHTMLDialog = CreateAskHTMLDialog;
+
+  int16 doccsid;
+  MWContext *context = pContext->GetContext();
+  CComposeFrame *pCompose = (CComposeFrame *) pContext->GetFrame()->GetFrameWnd();
+
+  pCompose->SetComposeStuff(context, fields); // squirl away stuff for post-create
+
+  // This needs to be set TRUE if using the old non-HTML text frame
+  // to prevent dropping dragged URLs
+  pContext->m_bDragging = !pCompose->UseHtml();
+  if (!pCompose->UseHtml()) 
+  {
+    pCompose->SetMsgPane(
+      MSG_CreateCompositionPane(pContext->GetContext(), 
+                                context, 
+                                g_MsgPrefs.m_pMsgPrefs, 
+                                fields,
+                                WFE_MSGGetMaster())
+                        );
+  }
+
+  ASSERT(pCompose->GetMsgPane());
+  MSG_SetFEData(pCompose->GetMsgPane(),(void *)pCompose);  
+  pCompose->UpdateAttachmentInfo();
+
+  // Pass doccsid info to new context for MailToWin conversion
+  doccsid = INTL_GetCSIDocCSID(LO_GetDocumentCharacterSetInfo(context));
+  INTL_SetCSIDocCSID(LO_GetDocumentCharacterSetInfo(context), 
+    (doccsid ? doccsid : INTL_DefaultDocCharSetID(context)));
+
+  pCompose->DisplayHeaders(NULL);
+
+  CComposeBar * pBar = pCompose->GetComposeBar();
+  ASSERT(pBar);
+  LPADDRESSCONTROL pIAddressList = pBar->GetAddressWidgetInterface();
+
+  if (!pIAddressList->IsCreated()) 
+  {
+    pBar->CreateAddressingBlock();
+  }
+
+  // rhp - Deal with addressing the brute force way! This is a 
+  // "fix" for bad behavior when creating these windows and not
+  // showing them on the desktop.
+  if (!winShowFlag)      // Hack to fix the window not being mapped
+  {
+    pCompose->AppendAddress(MSG_TO_HEADER_MASK, "");
+    pCompose->AppendAddress(MSG_CC_HEADER_MASK, "");
+    pCompose->AppendAddress(MSG_BCC_HEADER_MASK, "");
+  }
+
+  // Always do plain text composition!
+  pCompose->CompleteComposeInitialization();
+
+  // Do this so we don't get popups on "empty" messages
+  if ( (!pInitialText) || (!(*pInitialText)) )
+    pInitialText = " ";
+
+  const char * pBody = pInitialText ? pInitialText : MSG_GetCompBody(pCompose->GetMsgPane());
+  if (pBody)
+  {
+    FE_InsertMessageCompositionText(context,pBody,TRUE);
+  }
+
+  // 
+  // Now set the message as being edited!    
+  //
+  pCompose->SetModified(TRUE);
+
+  //
+  // Finally deal with the attachments...
+  //
+  if (sendMailPtr->MSG_nFileCount > 0)
+  {
+    // Send this puppy when done with the attachments...
+    if (!winShowFlag)
+    {
+      pCompose->SetMAPISendMode(MAPI_SAVE);
+    }
+
+    MSG_AttachmentData *pAttach = (MSG_AttachmentData *)
+                  XP_CALLOC((sendMailPtr->MSG_nFileCount + 1),
+                  sizeof(MSG_AttachmentData));
+    if (!pAttach)
+    {
+      return(MAPI_E_INSUFFICIENT_MEMORY);
+    }
+
+    memset(pAttach, 0, (sendMailPtr->MSG_nFileCount + 1) * 
+                                sizeof(MSG_AttachmentData));
+    for (i=0; i<sendMailPtr->MSG_nFileCount; i++)
+    {
+      CString cs;
+      // Create URL from filename...
+      WFE_ConvertFile2Url(cs, 
+          (const char *)NSStrSeqGet(mailInfoSeq, stringCount++));
+      pAttach[i].url = XP_STRDUP(cs);
+
+      // Now also include the "display" name...
+      StrAllocCopy(pAttach[i].real_name, NSStrSeqGet(mailInfoSeq, stringCount++));
+    }
+
+    // Set the list!
+    MSG_SetAttachmentList(pCompose->GetMsgPane(), pAttach);
+
+    // Now free everything...
+    for (i=0; i<sendMailPtr->MSG_nFileCount; i++)
+    {
+      if (pAttach[i].url)
+        XP_FREE(pAttach[i].url);
+
+      if (pAttach[i].real_name)
+        XP_FREE(pAttach[i].real_name);
+    }
+
+    XP_FREE(pAttach);
+  }
+
+  //
+  // Now, if we were supposed to do the blind send...do it, otherwise,
+  // just popup the window...
+  //
+  if (winShowFlag)      
+  {
+    // Post message to compose window to set the initial focus.
+    pCompose->PostMessage(WM_COMP_SET_INITIAL_FOCUS);
+  }
+  else if (sendMailPtr->MSG_nFileCount <= 0)  // Send NOW if no attachments!
+  {
+    pCompose->PostMessage(WM_COMMAND, IDM_SAVEASDRAFT);
+  }
+
+  return(SUCCESS_SUCCESS);
+}

mozilla/mailnews/mapi/old/hook/mapimail.h

@@ -0,0 +1,89 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+#ifndef _MAPI_MAIL_H_
+#define _MAPI_MAIL_H_
+
+#include "nscpmapi.h"
+#include <structs.h>    // for MWContext
+
+//extern "C" {
+
+//
+// This function will create a composition window and either do
+// a blind send or pop up the compose window for the user to 
+// complete the operation
+//
+// Return: appropriate MAPI return code...
+//
+//
+extern "C" LONG
+DoFullMAPIMailOperation(MAPISendMailType      *sendMailPtr,
+											  const char            *pInitialText,
+                        BOOL                  winShowFlag);
+
+//
+// This function will create a composition window and just attach
+// the attachments of interest and pop up the window...
+//
+// Return: appropriate MAPI return code...
+//
+//
+extern "C" LONG
+DoPartialMAPIMailOperation(MAPISendDocumentsType *sendDocPtr);
+
+//
+// This function will save a message into the Communicator "Drafts"
+// folder with no UI showing.
+//
+// Return: appropriate MAPI return code...
+//
+//
+extern "C" LONG 
+DoMAPISaveMailOperation(MAPISendMailType      *sendMailPtr,
+											  const char            *pInitialText);
+
+//
+// This will fire off a "get mail in background operation" in an
+// async. fashion.
+//
+extern "C" void
+MAPIGetNewMessagesInBackground(void);
+
+
+// } // extern "C"
+
+#endif // _MAPI_MAIL_H_

mozilla/mailnews/mapi/old/lib/Makefile.win

@@ -0,0 +1,50 @@
+#!nmake
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+DEPTH=..\..\..
+MODULE=mapiutils
+
+include <$(DEPTH)\config\config.mak>
+
+################################################################################
+## exports
+
+EXPORTS=	mapismem.h	\
+    		nsstrseq.h	\
+			$(NULL)
+
+################################################################################
+## library
+
+LIBRARY_NAME=mapiutils_s
+
+
+CPP_OBJS=   .\$(OBJDIR)\mapismem.obj		\
+			.\$(OBJDIR)\nsstrseq.obj		\
+			$(NULL)
+
+include <$(DEPTH)\config\rules.mak>
+
+install:: $(LIBRARY)
+	$(MAKE_INSTALL) $(LIBRARY) $(DIST)\lib
+
+clobber::
+	rm -f $(DIST)\lib\$(LIBRARY_NAME).lib

mozilla/mailnews/mapi/old/lib/mapismem.cpp

@@ -0,0 +1,173 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+//  smem.cpp - This deals with all shared memory functions needed for 
+//  the MAPI component of Communicator
+//  Written by: Rich Pizzarro (rhp@netscape.com)
+//  November 1997
+//
+#include <windows.h>
+#include <windowsx.h>
+
+#include "mapismem.h"
+
+
+#ifndef ZeroMemory
+#include <memory.h>
+#define ZeroMemory(PTR, SIZE) memset(PTR, 0, SIZE)
+#endif // ZeroMemory
+
+// 
+// *create new* shared memory chunk 
+// once this is created, use the pointer
+// to the segment to to store data 
+// e.g.: 
+//     lpString = "string for communicator"; 
+//     lstrcpy((LPSTR)pData->m_buf[0], lpString); 
+//  
+CSharedMem *
+NSCreateSharedMemory(DWORD memSize, LPCTSTR memName, HANDLE *hSharedMemory)
+{
+#ifdef WIN32
+
+  BOOL bExistedBefore;
+  CSharedMem *pData;
+
+  LPCTSTR szObjectName = memName; 
+  DWORD dwSize = sizeof(CSharedMem) + memSize; 
+  *hSharedMemory = CreateFileMapping( 
+    (HANDLE)0xFFFFFFFF,0,PAGE_READWRITE,0,dwSize,szObjectName); 
+  if(*hSharedMemory == 0) 
+  { 
+    return NULL; 
+  } 
+  bExistedBefore = (GetLastError() == ERROR_ALREADY_EXISTS); 
+  if(bExistedBefore) 
+  { 
+  	return NULL;
+  } 
+
+  pData = (CSharedMem *)MapViewOfFile( 
+            *hSharedMemory, FILE_MAP_ALL_ACCESS, 0, 0, 0); 
+  if(pData == NULL) 
+  { 
+    return NULL; 
+  } 
+
+  ZeroMemory(pData, dwSize); 
+  pData->m_dwSize = memSize; 
+
+  return pData;
+#else
+  CSharedMem 	*sMemChunk = NULL;
+  DWORD dwSize = memSize = (sizeof(CSharedMem) + memSize); 
+
+  if (sMemChunk != NULL)
+	  return(sMemChunk);
+
+  sMemChunk = (CSharedMem *) GlobalAllocPtr(GMEM_MOVEABLE, dwSize);
+  ZeroMemory(sMemChunk, (size_t) dwSize);
+  sMemChunk->m_dwSize = dwSize;   // Missing in Communicator code!
+  return(sMemChunk);
+
+#endif // WIN32
+}
+
+// 
+// *open existing* shared memory chunk 
+// once you have the pointer to the new segment 
+// use this pointer to access data, e.g.: 
+// 
+CSharedMem *
+NSOpenExistingSharedMemory(LPCTSTR memName, HANDLE *hSharedMemory)
+{
+#ifdef WIN32
+  CSharedMem *pData;
+  DWORD dwSize;
+
+  LPCTSTR szObjectName = memName; 
+  *hSharedMemory = OpenFileMapping( 
+    FILE_MAP_WRITE,FALSE,szObjectName); 
+  if(*hSharedMemory == 0) 
+  { 
+    return NULL; 
+  } 
+
+  pData = (CSharedMem *)MapViewOfFile( 
+              *hSharedMemory,FILE_MAP_ALL_ACCESS,0,0,0); 
+  if(pData == NULL) 
+  { 
+    return NULL; 
+  } 
+  
+  dwSize = pData->m_dwSize; 
+  return pData;
+#else
+
+  return(NULL);   // In Win16, this is really meaningless...
+
+#endif
+}  
+
+// 
+// to close shared memory segment
+// 
+void
+NSCloseSharedMemory(CSharedMem *pData, HANDLE hSharedMemory)
+{
+#ifdef WIN32
+  if(pData != 0) 
+  { 
+    UnmapViewOfFile(pData); 
+    pData = 0; 
+  } 
+
+  if(hSharedMemory != 0) 
+  { 
+    CloseHandle(hSharedMemory); 
+    hSharedMemory = 0; 
+  } 
+#else
+
+	if (pData != NULL)
+	{
+		GlobalFreePtr(pData);
+		pData = NULL;
+	}
+
+#endif // WIN32
+}

mozilla/mailnews/mapi/old/lib/mapismem.h

@@ -0,0 +1,116 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+#ifndef __SMEM_HPP__
+#define __SMEM_HPP__
+
+//
+// Need this for Win16 since it is an undocumented message
+//
+#ifndef WIN32
+
+#define WM_COPYDATA                     0x004A
+
+/*
+ * lParam of WM_COPYDATA message points to...
+ */
+typedef struct tagCOPYDATASTRUCT {
+    DWORD         dwData;
+    DWORD         cbData;
+    LPVOID        lpData;
+} COPYDATASTRUCT, *PCOPYDATASTRUCT;
+
+# ifndef LPCTSTR
+#   define LPCTSTR LPCSTR
+# endif
+
+
+#endif // ifndef WIN32
+
+// The following structure will be stored in the shared memory 
+// and will be used to pass data back and forth 
+
+#pragma pack(4) 
+
+typedef struct  
+{ 
+  DWORD m_dwSize;       // size of the shared memory block 
+  BYTE  m_buf[1];       // this is the buffer of memory to be used
+} CSharedMem; 
+
+#pragma pack(4) 
+
+// ******************************************************
+// Public routines...
+// ******************************************************
+// 
+// 
+// *create new* shared memory chunk 
+// once this is created, use the pointer
+// to the segment to to store data 
+// e.g.: 
+//     lpString = "string for communicator"; 
+//     lstrcpy((LPSTR)pData->m_buf[0], lpString); 
+//     pData->m_dwBytesUsed = lstrlen(lpString) + 1; // count '\0' 
+//  
+CSharedMem *
+NSCreateSharedMemory(DWORD memSize, LPCTSTR memName, HANDLE *hSharedMemory);
+
+// 
+// *open existing* shared memory chunk 
+// once you have the pointer to the new segment 
+// use this pointer to access data, e.g.: 
+//
+// This will return the pointer to the memory chunk as well as
+// fill out the hSharedMemory argument that is needed for subsequent
+// operations.
+// 
+//  if(pData->m_dwBytesUsed > 0) 
+//  { 
+//    // use pData->m_buf here 
+//  } 
+//
+CSharedMem *
+NSOpenExistingSharedMemory(LPCTSTR memName, HANDLE *hSharedMemory);
+
+//
+// You must pass in the pointer to the memory chunk as well as
+// the hSharedMemory HANDLE to close shared memory segment
+// 
+void
+NSCloseSharedMemory(CSharedMem *pData, HANDLE hSharedMemory);
+
+#endif  // __SMEM_HPP__

mozilla/mailnews/mapi/old/lib/nsstrseq.cpp

@@ -0,0 +1,230 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+//  This is a string sequence handling routine to take complex
+//  structures and merge them into a chunk of memory.
+//
+//  Written by: Rich Pizzarro (rhp@netscape.com)
+//  November 1997
+//
+#include <string.h>
+#include <stdlib.h>
+#include <windows.h>
+#include <windowsx.h>
+
+#include "nsstrseq.h"
+
+#ifndef NULL
+#define NULL '\0'
+#endif
+
+#define MARKER '\377'
+
+//
+// Delete an existing string sequence
+//
+void NSStrSeqDelete(NSstringSeq seq)
+{
+  if (seq != NULL)
+    free(seq);
+  
+  seq = NULL;
+}
+
+//
+// Allocate a new sequence, copying the given strings into it. 
+//
+NSstringSeq NSStrSeqNew(LPSTR strings[])
+{
+  int size;
+  if (!strings)
+  {
+    return NULL;
+  }
+  
+  {
+    int i;
+    for (i=0,size=0; strings[i]; i++)
+    {
+      size+=strlen(strings[i])+1;
+      switch (strings[i][0])
+      {
+        // Need to pad "" or anything starting with 255 
+        // to allow for multiple blank strings in a row
+      case 0:
+      case MARKER:
+        size++;
+        break;
+        
+      default:
+        break;
+      }
+    }
+  }
+  
+  {
+    NSstringSeq s=(NSstringSeq)malloc(size+1);
+    if (!s)
+    {	return NULL;}
+    
+    {
+      int i,offset;
+      for (i=0,offset=0; strings[i]; i++)
+      {
+        switch (strings[i][0])
+        {
+          // Need to pad "" or anything starting with 255
+        case 0:
+        case MARKER:
+          s[offset++]=MARKER;
+          break;
+          
+        default:
+          break;
+        }
+        strcpy(s+offset,strings[i]);
+        offset+=strlen(strings[i])+1;
+      }
+      s[offset]=0;
+    }
+    
+    return s;
+  }
+}
+
+//
+// Get the # of bytes required for the sequence 
+//
+LONG NSStrSeqSize(NSstringSeq seq)
+{
+  const char* s;
+  if (!seq)
+    {
+      return -1;
+    }
+
+  for (s=seq+1; ((*s) || (*(s-1))); s++)
+    ;
+
+  // At this point, s points to the second 0 
+  // of the double 0 at the end 
+  return (s-seq)+1;
+}
+
+//
+// Get the # of strings in the sequence 
+//
+LONG NSStrSeqNumStrs(NSstringSeq seq)
+{
+  const char* s;
+  int N;
+  if (!seq)
+  {
+    return -1;
+  }
+  
+  for (s=seq+1,N=0; ((*s) || (*(s-1))); s++)
+  {
+    if (!(*s))
+      N++;
+  }
+  
+  return N;
+}
+
+static LPSTR correct(LPSTR s)
+{
+  if (s[0]==MARKER)
+    return s+1;
+  else  // Anup , 4/96
+    return s;
+}
+
+//
+// Extract the index'th string in the sequence
+//
+LPSTR NSStrSeqGet(NSstringSeq seq, LONG index)
+{
+  char* s;
+  int N;
+
+  if (!seq)
+  {
+    return NULL;
+  }
+  
+  if (index<0)
+  {
+    return NULL;
+  }
+  
+  if (!index)
+    return correct(seq);
+  
+  for (s=seq+1,N=0; ((*s) || (*(s-1))) && (N<index); s++)
+  {
+    if (!(*s))
+      N++;
+  }
+  
+  if (N==index)
+    return correct(s);
+  
+  return NULL;
+}
+
+LPSTR * NSStrSeqGetAll(NSstringSeq seq)
+{
+  LONG N=NSStrSeqNumStrs(seq);
+  if (N<0)
+    return NULL;
+  
+  {
+    char** res=(char**)malloc( (size_t) ((N+1)*sizeof(char*)) );
+    int i;
+    
+    if (!res)
+    {
+      return NULL;
+    }
+    for (i=0; i<N; i++)
+      res[i]=NSStrSeqGet(seq,i);
+    res[N]=NULL;
+    
+    return res;
+  }
+}

mozilla/mailnews/mapi/old/lib/nsstrseq.h

@@ -0,0 +1,68 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+#ifndef __SEQUENCES_OF_STRINGS_H_
+#define __SEQUENCES_OF_STRINGS_H	
+
+
+typedef LPSTR NSstringSeq;
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+void NSStrSeqDelete(NSstringSeq seq);
+NSstringSeq NSStrSeqNew(LPSTR strings[]);
+
+// Get the # of bytes required for the sequence 
+LONG NSStrSeqSize(NSstringSeq seq);
+
+// Get the # of strings in the sequence
+LONG NSStrSeqNumStrs(NSstringSeq seq);
+
+// Extract the index'th string in the sequence
+LPSTR NSStrSeqGet(NSstringSeq seq, LONG index);
+
+// Build an array of all the strings in the sequence
+LPSTR *NSStrSeqGetAll(NSstringSeq seq);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif // __sequences_of_strings_h_

mozilla/mailnews/mapi/old/makefile.win

@@ -0,0 +1,26 @@
+#!nmake
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+DEPTH=..\..
+
+DIRS=public lib mapi32 tests hook
+
+include <$(DEPTH)\config\rules.mak>

mozilla/mailnews/mapi/old/mapi32/maindll.cpp

@@ -0,0 +1,100 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+//  DLLMain to get a handle on an hInstance 
+//  Written by: Rich Pizzarro (rhp@netscape.com)
+//  November 1997
+#include <windows.h>
+
+//  
+// global variables
+//
+HINSTANCE hInstance;
+
+//
+// DLL entry
+//  
+#ifdef WIN32
+/****************************************************************************
+   FUNCTION: DllMain(HANDLE, DWORD, LPVOID)
+
+   PURPOSE:  DllMain is called by Windows when
+             the DLL is initialized, Thread Attached, and other times.
+             Refer to SDK documentation, as to the different ways this
+             may be called.
+             
+             The DllMain function should perform additional initialization
+             tasks required by the DLL.  In this example, no initialization
+             tasks are required.  DllMain should return a value of 1 if
+             the initialization is successful.
+           
+*******************************************************************************/
+BOOL APIENTRY DllMain(HANDLE hInstLocal, DWORD ul_reason_being_called, LPVOID lpReserved) 
+{
+  hInstance = (HINSTANCE)hInstLocal;
+
+  if (hInstance != NULL) 
+	  return 1;
+  else  
+	  return 0;
+}
+
+#else  // WIN16
+
+
+//--------------------------------------------------------------------
+// LibMain( hInstance, wDataSegment, wHeapSize, lpszCmdLine ) : WORD
+//
+//    hInstance      library instance handle
+//    wDataSegment   library data segment
+//    wHeapSize      default heap size
+//    lpszCmdLine    command line arguments
+//
+//--------------------------------------------------------------------
+
+int CALLBACK LibMain(HINSTANCE hInstLocal, WORD wDataSegment, WORD wHeapSize, LPSTR lpszCmdLine) 
+{
+  hInstance = hInstLocal;
+  /* return result 1 = success; 0 = fail */
+  if (hInstance != NULL) 
+	  return 1;
+  else
+	  return 0;
+}
+
+#endif // WIN16
+

mozilla/mailnews/mapi/old/mapi32/makefile.win

@@ -0,0 +1,70 @@
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#
+
+DEPTH=..\..\..
+MODULE=mapi32
+
+################################################################################
+## exports
+
+#EXPORTS =
+
+
+################################################################################
+## library
+
+LIBNAME = .\$(OBJDIR)\mapi32
+DEFINES= -NS_DEBUG
+DEFFILE=MAPI32.def
+
+!ifdef MOZ_STATIC_COMPONENT_LIBS
+LIB = $(LIBNAME).lib
+!else
+DLL = $(LIBNAME).dll
+!endif
+
+OBJS=										\
+    .\$(OBJDIR)\maindll.obj  \
+    .\$(OBJDIR)\mapi32.obj  \
+    .\$(OBJDIR)\mapiipc.obj  \
+    .\$(OBJDIR)\mapimem.obj  \
+    .\$(OBJDIR)\mapiutl.obj  \
+    .\$(OBJDIR)\smem.obj  \
+    .\$(OBJDIR)\trace.obj  \
+    .\$(OBJDIR)\xpapi.obj  \
+		$(NULL)
+
+LLIBS=										\
+			$(LLIBS)						\
+			$(LIBNSPR)						\
+			$(DIST)\lib\xppref32.lib		\
+			$(DIST)\lib\xpcom.lib       	\
+			$(DIST)\lib\mapiutils_s.lib  \
+			$(NULL)
+
+include <$(DEPTH)\config\rules.mak>
+
+!ifdef MOZ_STATIC_COMPONENT_LIBS
+install:: $(LIB)
+	$(MAKE_INSTALL)  $(LIBNAME).$(LIB_SUFFIX) $(DIST)\bin\components
+!else
+install:: $(DLL)
+	$(MAKE_INSTALL)  $(LIBNAME).$(DLL_SUFFIX) $(DIST)\bin\components
+!endif

mozilla/mailnews/mapi/old/mapi32/mapi32.def

@@ -0,0 +1,14 @@
+EXPORTS
+	MAPILogon
+	MAPILogoff
+	MAPISendMail
+	MAPISendDocuments
+	MAPIFreeBuffer
+	MAPIFindNext
+	MAPIReadMail
+	MAPISaveMail
+	MAPIDeleteMail
+	MAPIAddress
+	MAPIDetails
+	MAPIResolveName
+  MAPIGetNetscapeVersion

mozilla/mailnews/mapi/old/mapi32/mapi32.rc

@@ -0,0 +1,146 @@
+// Insert copyright and license here 1997
+//Microsoft Developer Studio generated resource script.
+//
+#include "resource.h"
+
+#define APSTUDIO_READONLY_SYMBOLS
+/////////////////////////////////////////////////////////////////////////////
+//
+// Generated from the TEXTINCLUDE 2 resource.
+//
+#include "afxres.h"
+
+/////////////////////////////////////////////////////////////////////////////
+#undef APSTUDIO_READONLY_SYMBOLS
+
+/////////////////////////////////////////////////////////////////////////////
+// English (U.S.) resources
+
+#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_ENU)
+#ifdef _WIN32
+LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
+#pragma code_page(1252)
+#endif //_WIN32
+
+/////////////////////////////////////////////////////////////////////////////
+//
+// Dialog
+//
+
+ID_DIALOG_MAPI DIALOGEX 0, 0, 186, 111
+STYLE DS_MODALFRAME | WS_POPUP | WS_CAPTION | WS_SYSMENU
+EXSTYLE WS_EX_TOOLWINDOW
+CAPTION "Netscape MAPI Support"
+FONT 8, "MS Sans Serif"
+BEGIN
+    DEFPUSHBUTTON   "OK",IDOK,41,95,50,14
+    PUSHBUTTON      "Cancel",IDCANCEL,104,95,50,14
+    GROUPBOX        "Diagnostic Information",IDC_STATIC,2,2,182,91
+    CTEXT           "This window will contain MAPI relative\ninformation for Netscape Communicator",
+                    IDC_STATIC,11,14,159,30
+END
+
+
+/////////////////////////////////////////////////////////////////////////////
+//
+// DESIGNINFO
+//
+
+#ifdef APSTUDIO_INVOKED
+GUIDELINES DESIGNINFO DISCARDABLE 
+BEGIN
+    ID_DIALOG_MAPI, DIALOG
+    BEGIN
+        LEFTMARGIN, 2
+        RIGHTMARGIN, 184
+        TOPMARGIN, 2
+        BOTTOMMARGIN, 109
+    END
+END
+#endif    // APSTUDIO_INVOKED
+
+
+#ifdef APSTUDIO_INVOKED
+/////////////////////////////////////////////////////////////////////////////
+//
+// TEXTINCLUDE
+//
+
+1 TEXTINCLUDE DISCARDABLE 
+BEGIN
+    "resource.h\0"
+END
+
+2 TEXTINCLUDE DISCARDABLE 
+BEGIN
+    "#include ""afxres.h""\r\n"
+    "\0"
+END
+
+3 TEXTINCLUDE DISCARDABLE 
+BEGIN
+    "\r\n"
+    "\0"
+END
+
+#endif    // APSTUDIO_INVOKED
+
+
+#ifndef _MAC
+/////////////////////////////////////////////////////////////////////////////
+//
+// Version
+//
+
+VS_VERSION_INFO VERSIONINFO
+ FILEVERSION 5,0,0,1
+ PRODUCTVERSION 5,0,0,1
+ FILEFLAGSMASK 0x3fL
+#ifdef _DEBUG
+ FILEFLAGS 0x1L
+#else
+ FILEFLAGS 0x0L
+#endif
+ FILEOS 0x40004L
+ FILETYPE 0x2L
+ FILESUBTYPE 0x0L
+BEGIN
+    BLOCK "StringFileInfo"
+    BEGIN
+        BLOCK "040904b0"
+        BEGIN
+            VALUE "Comments", "Simple MAPI DLL\0"
+            VALUE "CompanyName", "Netscape Communications Corporation\0"
+            VALUE "FileDescription", "mapi32\0"
+            VALUE "FileVersion", "5, 0, 0, 1\0"
+            VALUE "InternalName", "mapi32\0"
+            VALUE "LegalCopyright", "Copyright © 1997\0"
+            VALUE "LegalTrademarks", "Netscape and Netscape Navigator are registered trademarks of Netscape Communications Corporation.\0"
+            VALUE "OriginalFilename", "mapi32.dll\0"
+            VALUE "ProductName", "Netscape Communications Simple MAPI\0"
+            VALUE "ProductVersion", "5, 0, 0, 1\0"
+        END
+    END
+    BLOCK "VarFileInfo"
+    BEGIN
+        VALUE "Translation", 0x409, 1200
+    END
+END
+
+#endif    // !_MAC
+
+#endif    // English (U.S.) resources
+/////////////////////////////////////////////////////////////////////////////
+
+
+
+#ifndef APSTUDIO_INVOKED
+/////////////////////////////////////////////////////////////////////////////
+//
+// Generated from the TEXTINCLUDE 3 resource.
+//
+
+
+/////////////////////////////////////////////////////////////////////////////
+#endif    // not APSTUDIO_INVOKED
+

mozilla/mailnews/mapi/old/mapi32/mapiipc.cpp

@@ -0,0 +1,249 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+//  MAPI IPC Routines
+//  Written by: Rich Pizzarro (rhp@netscape.com)
+//  November 1997
+//
+#include <windows.h>
+#include <windowsx.h>
+#include <nscpmapi.h>   // Should live in Communicator
+
+#include "resource.h"
+#include "mapiipc.h"
+#include "mapismem.h"
+#include "trace.h"
+
+#ifndef WIN32
+#include <string.h>
+#endif 
+
+//
+// Necessary variables...
+//
+static LONG       instanceCount = 0;
+HWND				      hWndMAPI = NULL;
+char				      szClassName[] = "NetscapeMAPIClient";
+char              szWindowName[] = "NetscapeMAPI";
+
+//
+// External declares...
+//
+extern HINSTANCE  hInstance;
+
+void 
+ProcessCommand(HWND hWnd, int id, HWND hCtl, UINT codeNotify) 
+{ 
+	switch (id) 
+	{
+	case IDOK:   
+	case IDCANCEL:
+		{
+			ShowWindow(hWnd, SW_HIDE);
+		}
+		
+	default:
+		;
+	}
+}
+
+BOOL CALLBACK LOADDS 
+MyDlgProc(HWND hWndMain, UINT wMsg, WPARAM wParam, LPARAM lParam) 
+{
+  switch (wMsg) 
+  {
+  case WM_INITDIALOG: 
+    {
+      hWndMAPI = hWndMain;
+    }
+    break;
+    
+  case WM_CLOSE:
+//    DestroyWindow(hWndMain);
+    break;
+    
+  case WM_DESTROY:
+    hWndMain = NULL;
+    break;
+
+  case WM_COMMAND:
+	  HANDLE_WM_COMMAND(hWndMAPI, wParam, lParam, ProcessCommand);
+    break;
+
+  default:
+    return FALSE;
+  }
+
+  return TRUE;
+}
+
+BOOL 
+InitInstance(HINSTANCE hInstance)
+{
+  //
+  // Create a main window for this application instance.  
+  //
+  /* RICHIE - TRY SOME CHANGES!!!
+  hWndMAPI = CreateDialog((HINSTANCE) hInstance, 
+        MAKEINTRESOURCE(ID_DIALOG_QAHOOK),
+        (HWND) NULL, (DLGPROC) MyDlgProc);
+   ******/
+  hWndMAPI = CreateWindow(
+              szClassName,	// pointer to registered class name
+              szWindowName,	// pointer to window name
+              WS_CHILD,	    // window style
+              -10,          	// horizontal position of window
+              -10,	          // vertical position of window
+              1,	          // window width
+              1,	          // window height
+              GetDesktopWindow(),	// handle to parent or owner window
+              NULL,	        // handle to menu or child-window identifier
+              hInstance,	  // handle to application instance
+              NULL          // pointer to window-creation data
+              );
+  if (!hWndMAPI)
+    return FALSE;
+  else
+    return TRUE;
+}
+
+BOOL 
+InitApp(void)
+{
+#ifdef WIN32
+  WNDCLASS wc;
+  wc.style         = 0; 
+  wc.lpfnWndProc   = DefDlgProc; 
+  wc.cbClsExtra    = 0; 
+  wc.cbWndExtra    = DLGWINDOWEXTRA; 
+  wc.hInstance     = hInstance; 
+  wc.hIcon         = LoadIcon(hInstance, MAKEINTRESOURCE(ID_ICON_APP)); 
+  wc.hCursor       = LoadCursor(0, IDC_ARROW); 
+  wc.hbrBackground = (HBRUSH)(COLOR_BTNFACE + 1);
+  wc.lpszMenuName  = NULL; 
+  wc.lpszClassName = szClassName;
+  
+  if(!RegisterClass(&wc))
+    return FALSE;
+#endif
+  
+  return TRUE;
+} // end InitApp
+
+BOOL
+InitDLL(void)
+{
+  if (hWndMAPI != NULL)
+    return TRUE;
+
+  if (!InitApp()) 
+  { 
+    return FALSE;
+  }
+  
+  if (!InitInstance(hInstance)) 
+  {    
+    return FALSE;
+  }
+  
+//  ShowWindow(hWndMAPI, SW_SHOW);    Just for jollies
+  return(TRUE);
+}
+
+//*************************************************************
+//* Calls exposed for rest of DLL...
+//*************************************************************
+//
+// Purpose: Open the API
+// Return: 1 on success
+//         0 on failure
+//
+DWORD nsMAPI_OpenAPI(void)
+{
+  if (instanceCount > 0)
+  {
+    return(1);
+  }
+
+  ++instanceCount;
+  return(1);
+}
+
+//
+// Purpose: Close the API
+//
+void nsMAPI_CloseAPI(void)
+{
+  --instanceCount;
+  if (instanceCount <= 0)
+  {
+    instanceCount = 0;
+  }
+
+  return;
+}
+
+//
+// Send the actual request to Communicator
+//
+LRESULT
+SendMAPIRequest(HWND hWnd, 
+                DWORD mapiRequestID, 
+                MAPIIPCType *ipcInfo)
+{
+LRESULT         returnVal = 0;
+COPYDATASTRUCT  cds;
+
+  if (!InitDLL())
+  {
+    return 0;
+  }
+
+  cds.dwData = mapiRequestID;
+  cds.cbData = sizeof(MAPIIPCType);
+  cds.lpData = ipcInfo;
+
+  // Make the call into Communicator
+  returnVal = SendMessage(hWnd, WM_COPYDATA, (WPARAM) hWndMAPI, (LPARAM) &cds);
+
+  // Now kill the window...
+  DestroyWindow(hWndMAPI);
+  hWndMAPI = NULL;
+  UnregisterClass(szClassName, hInstance);
+  
+  return returnVal;
+}

mozilla/mailnews/mapi/old/mapi32/mapiipc.h

@@ -0,0 +1,63 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+#ifndef __MAPIIPC_HPP__
+#define __MAPIIPC_HPP__
+
+#include "port.h"
+#include <nscpmapi.h>
+
+//********************************************************
+// Open and close functions for API
+//********************************************************
+// Open the API
+// Return: 1 on success, 0 on failure
+//
+DWORD nsMAPI_OpenAPI(void);
+
+//
+// Purpose: Close the API
+//
+void  nsMAPI_CloseAPI(void);
+
+//
+// Send the actual request to Communicator
+//
+LRESULT   SendMAPIRequest(HWND hWnd, 
+                DWORD mapiRequestID, 
+                MAPIIPCType *ipcInfo);
+
+#endif // __MAPIIPC_HPP__

mozilla/mailnews/mapi/old/mapi32/mapimem.cpp

@@ -0,0 +1,363 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+//  mem.cpp
+//  Written by: Rich Pizzarro (rhp@netscape.com)
+//  November 1997
+//  This implements various memory management functions for use with
+//  MAPI features of Communicator
+//
+#include <windows.h>     
+#include <memory.h> 
+#include <malloc.h>
+#include "mapimem.h"
+#include <nscpmapi.h>   // lives in communicator winfe
+#include "nsstrseq.h"
+#include "trace.h"
+#include "mapiutl.h"
+#include "xpapi.h"
+
+LPSTR
+CheckNullString(LPSTR inStr)
+{
+  static UCHAR  str[1];
+
+  str[0] = '\0';
+  if (inStr == NULL)
+    return((LPSTR)str);
+  else
+    return(inStr);
+}
+
+void
+FreeMAPIFile(lpMapiFileDesc pv)
+{
+  if (!pv)
+    return;
+
+  if (pv->lpszPathName != NULL)   
+    free(pv->lpszPathName);
+
+  if (pv->lpszFileName != NULL)   
+    free(pv->lpszFileName);
+}
+
+void
+FreeMAPIMessage(lpMapiMessage pv)
+{
+  ULONG i;
+
+  if (!pv)
+    return;
+
+  if (pv->lpszSubject != NULL)
+    free(pv->lpszSubject);
+
+  if (pv->lpszNoteText)
+      free(pv->lpszNoteText);
+  
+  if (pv->lpszMessageType)
+    free(pv->lpszMessageType);
+  
+  if (pv->lpszDateReceived)
+    free(pv->lpszDateReceived);
+  
+  if (pv->lpszConversationID)
+    free(pv->lpszConversationID);
+  
+  if (pv->lpOriginator)
+    FreeMAPIRecipient(pv->lpOriginator);
+  
+  for (i=0; i<pv->nRecipCount; i++)
+  {
+    if (&(pv->lpRecips[i]) != NULL)
+    {
+      FreeMAPIRecipient(&(pv->lpRecips[i]));
+    }
+  }
+
+  if (pv->lpRecips != NULL)
+  {
+    free(pv->lpRecips);
+  }
+
+  for (i=0; i<pv->nFileCount; i++)
+  {
+    if (&(pv->lpFiles[i]) != NULL)
+    {
+      FreeMAPIFile(&(pv->lpFiles[i]));
+    }
+  }
+
+  if (pv->lpFiles != NULL)
+  {
+    free(pv->lpFiles);
+  }
+  
+  free(pv);
+  pv = NULL;
+}
+
+void
+FreeMAPIRecipient(lpMapiRecipDesc pv)
+{
+  if (!pv)
+    return;
+
+  if (pv->lpszName != NULL)   
+    free(pv->lpszName);
+
+  if (pv->lpszAddress != NULL)
+    free(pv->lpszAddress);
+
+  if (pv->lpEntryID != NULL)
+    free(pv->lpEntryID);  
+}
+
+//
+// This routine will take an lpMapiMessage structure and "flatten" it into
+// one contiguous chunk of memory that can be easily passed around. After this
+// is done, "extract" routines will be written to get complicated string routines
+// out of the chunk of memory at the end.
+// 
+LPVOID
+FlattenMAPIMessageStructure(lpMapiMessage msg, DWORD *totalSize)
+{
+  MAPISendMailType    *mailPtr;
+  LPSTR               *strArray;
+  DWORD               strCount = 0;
+  DWORD               currentString = 0;
+  DWORD               arrayBufSize = 0;
+  DWORD               i;
+
+  *totalSize = 0;
+  if (!msg)
+    return(NULL);
+
+  //
+  // Allocate the initial structure to hold all of the mail info.
+  //
+  *totalSize = sizeof(MAPISendMailType);
+  mailPtr = (MAPISendMailType *) malloc(sizeof(MAPISendMailType));
+  if (!mailPtr)
+    return(NULL);
+  memset(mailPtr, 0, sizeof(MAPISendMailType));
+
+  //
+  // First, assign all of the easy numeric values...
+  //
+  mailPtr->MSG_flFlags = msg->flFlags;          // unread,return receipt
+  mailPtr->MSG_nRecipCount = msg->nRecipCount;  // Number of recipients
+  mailPtr->MSG_nFileCount = msg->nFileCount;    // # of file attachments
+  if (msg->lpOriginator != NULL)
+  {
+    mailPtr->MSG_ORIG_ulRecipClass = msg->lpOriginator->ulRecipClass; //  Recipient class - MAPI_TO, MAPI_CC, MAPI_BCC, MAPI_ORIG
+  }
+
+  //
+  // Now, figure out how many string pointers we need...
+  //
+  strCount = 4;     // These are the 4 KNOWN strings up front for a message
+  strCount += 2;    // This is for the originator name and address
+
+  strCount += msg->nRecipCount * 3; // Name, address & class (cc, bcc) for each recipient
+  strCount += msg->nFileCount  * 2; // filename and display name for each attachment
+
+  // 
+  // Now allocate a new string sequence...add one entry for NULL at the end
+  //  
+  arrayBufSize = sizeof(LPSTR) * (strCount + 1);
+
+#ifdef WIN16    // Check for max mem allocation...
+  if ((sizeof(MAPISendMailType) + arrayBufSize) > 64000)
+  {
+    free(mailPtr);
+    return NULL;
+  }
+#endif
+
+  //
+  // Allocate a buffer for the string pointers and if this fails, 
+  // cleanup and return.
+  // 
+  strArray = (LPSTR *)malloc( (size_t) arrayBufSize);
+  if (!strArray)
+  {
+    free(mailPtr);
+    return NULL;
+  }
+
+  memset(strArray, 0, (size_t) arrayBufSize);  // Set the array to NULL
+  strArray[currentString++] = CheckNullString(msg->lpszSubject);        // Message Subject
+  strArray[currentString++] = CheckNullString(msg->lpszNoteText);       // Message Text  
+  strArray[currentString++] = CheckNullString(msg->lpszDateReceived);   // in YYYY/MM/DD HH:MM format
+  strArray[currentString++] = CheckNullString(msg->lpszConversationID); // conversation thread ID
+
+  if (msg->lpOriginator)
+  {
+    strArray[currentString++] = CheckNullString(msg->lpOriginator[0].lpszName);
+    strArray[currentString++] = CheckNullString(msg->lpOriginator[0].lpszAddress);
+  }
+  else
+  {
+    strArray[currentString++] = CheckNullString(NULL);
+    strArray[currentString++] = CheckNullString(NULL);
+  }
+
+  //
+  // Assign pointers for the Name and address of each recipient
+  //
+  LPSTR toString  = "1";
+  LPSTR ccString  = "2";
+  LPSTR bccString = "3";
+
+  for (i=0; i<msg->nRecipCount; i++)
+  {
+    // rhp - need message class
+    if (msg->lpRecips[i].ulRecipClass == MAPI_BCC)
+      strArray[currentString++] = CheckNullString(bccString);
+    else if (msg->lpRecips[i].ulRecipClass == MAPI_CC)
+      strArray[currentString++] = CheckNullString(ccString);
+    else
+      strArray[currentString++] = CheckNullString(toString);
+
+    strArray[currentString++] = CheckNullString(msg->lpRecips[i].lpszName);
+    strArray[currentString++] = CheckNullString(msg->lpRecips[i].lpszAddress);  
+  }
+
+  BYTE    szNewFileName[_MAX_PATH];
+
+  for (i=0; i<msg->nFileCount; i++)
+  {
+    char *namePtr;
+    // have to copy/create temp files here of office won't work...
+
+    if ( 
+          (msg->lpFiles[i].lpszFileName != NULL) &&
+          (*msg->lpFiles[i].lpszFileName != '\0') 
+       )
+    {
+      namePtr = (char *)msg->lpFiles[i].lpszFileName;
+    }
+    else
+    {
+      namePtr = (char *)msg->lpFiles[i].lpszPathName;
+    }
+
+    if (GetTempMailNameWithExtension((char *)szNewFileName, namePtr) == 0)
+    {
+      free(strArray);
+      free(mailPtr);
+      return NULL;
+    }
+    
+    if (!XP_CopyFile((char *)msg->lpFiles[i].lpszPathName, (char *)szNewFileName, TRUE))
+    {
+      free(strArray);
+      free(mailPtr);
+      return NULL;
+    }
+
+    strArray[currentString++] = CheckNullString((char *)szNewFileName);
+    strArray[currentString++] = CheckNullString(msg->lpFiles[i].lpszFileName);
+
+    AddTempFile((LPSTR) szNewFileName);
+//    strArray[currentString++] = CheckNullString(msg->lpFiles[i].lpszPathName);
+//    strArray[currentString++] = CheckNullString(msg->lpFiles[i].lpszFileName);
+  }
+
+  if (currentString != strCount)
+  {
+    TRACE("MAPI PROBLEM!!!!!! FlattenMAPIMessageStructure() currentString != strCount\n");
+  }
+
+  strArray[strCount] = NULL;    // terminate at the end
+  NSstringSeq strSeq = NSStrSeqNew(strArray);
+  if (!strSeq)
+  {
+    free(strArray);
+    free(mailPtr);
+    return NULL;
+  }
+  
+  //
+  // Now we need to copy the structure into a big, contiguous chunk of memory
+  //
+  LONG totalArraySize = NSStrSeqSize(strSeq);
+  LONG totalMemSize = sizeof(MAPISendMailType) + totalArraySize;
+
+#ifdef WIN16
+  if (totalMemSize > 64000)
+  {
+    free(strArray);
+    NSStrSeqDelete(strSeq);
+    free(mailPtr);
+    return NULL;
+  }
+#endif
+
+  MAPISendMailType *newMailPtr = (MAPISendMailType *)malloc((size_t)totalMemSize);
+  if (!newMailPtr)
+  {
+    free(strArray);
+    NSStrSeqDelete(strSeq);
+    free(mailPtr);
+    return NULL;
+  }
+
+  memset(newMailPtr, 0, (size_t) totalMemSize);
+  //
+  // Finally do the copy...
+  //
+  memcpy(newMailPtr, mailPtr, sizeof(MAPISendMailType));
+  memcpy(newMailPtr->dataBuf, strSeq, (size_t) totalArraySize);
+  *totalSize = totalMemSize;
+
+  //
+  // Cleanup and scram...
+  //
+  if (strArray)
+    free(strArray);
+
+  if (strSeq)
+    NSStrSeqDelete(strSeq);
+
+  if (mailPtr)
+    free(mailPtr);
+
+  return(newMailPtr);
+}

mozilla/mailnews/mapi/old/mapi32/mapimem.h

@@ -0,0 +1,76 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+#ifndef __MY_MEM_HPP__
+#define __MY_MEM_HPP__
+
+#ifndef MAPI_OLE	// Because MSFT doesn't do this for us :-(
+#include <mapi.h>                                                 
+#endif
+
+//
+// Needed for turning NULL's into ""'s for string sequence routines...
+//
+LPSTR     CheckNullString(LPSTR inStr);
+
+//
+// Memory allocation functions...
+//
+
+//
+// This will free an lpMapiMessage structure allocated by this DLL
+//
+void      FreeMAPIMessage(lpMapiMessage pv);
+
+//
+// This will free an lpMapiRecipDesc structure allocated by this DLL
+//
+void      FreeMAPIRecipient(lpMapiRecipDesc pv);
+
+//
+// Frees a mapi file object...
+//
+void      FreeMAPIFile(lpMapiFileDesc pv);
+
+//
+// This routine will take an lpMapiMessage structure and "flatten" it into
+// one contiguous chunk of memory that can be easily passed around. 
+// 
+LPVOID    FlattenMAPIMessageStructure(lpMapiMessage msg, DWORD *totalSize);
+
+
+
+#endif  // __MY_MEM_HPP__

mozilla/mailnews/mapi/old/mapi32/mapiutl.cpp

@@ -0,0 +1,899 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+//  Various utils needed for the MAPI functions
+//  Written by: Rich Pizzarro (rhp@netscape.com)
+//  November 1997
+//
+#include <windows.h> 
+#include <time.h> 
+#include <sys/stat.h>
+#include <io.h>
+#include "xpapi.h"
+#include "trace.h"
+#include "mapiipc.h"
+#include "mapiutl.h"
+
+//
+// Global variables
+//
+BOOL	  gLoggingEnabled = FALSE;
+
+void
+SetLoggingEnabled(BOOL val)
+{
+  gLoggingEnabled = val;
+}
+
+// Log File
+void 
+LogString(LPCSTR pStr1)
+{
+  // Off of the declaration line...
+  LPCSTR pStr2 = NULL;
+  BOOL useStr1 = TRUE;
+
+	if (gLoggingEnabled)
+	{
+		char tempPath[_MAX_PATH] = "";
+    if (getenv("TEMP"))
+    {
+      lstrcpy((LPSTR) tempPath, getenv("TEMP"));  // environmental variable
+    } 
+
+		int len = lstrlen(tempPath);
+		if ((len > 1) && tempPath[len - 1] != '\\')
+		{
+			lstrcat(tempPath, "\\");
+		}
+		lstrcat(tempPath, szMapiLog);
+		HFILE hFile = _lopen(tempPath, OF_WRITE);
+		if (hFile == HFILE_ERROR)
+		{
+			hFile = _lcreat(tempPath, 0);
+		}
+		if (hFile != HFILE_ERROR)
+		{
+			_llseek(hFile, 0, SEEK_END);		// seek to the end of the file
+			LPCSTR pTemp = useStr1 ? pStr1 : pStr2;
+			_lwrite(hFile, pTemp, lstrlen(pTemp));
+			_lclose(hFile);
+		}
+	}
+}
+
+//
+// Find Communicator and return an HWND, if not, start Communicator,
+// then find an HWND
+//
+HWND 
+GetCommunicatorIPCWindow(void)
+{
+  HWND  hWnd = NULL; 
+  DWORD timeCount = 0;
+  BOOL  launchTry = FALSE;
+
+  //
+  // This will wait for 10 seconds before giving up and failing
+  //
+  while ((hWnd == NULL) && (timeCount < 20))
+  {
+    if ((hWnd = FindWindow("AfxFrameOrView", NULL)) && !FindWindow("aHiddenFrameClass", NULL))
+      return(hWnd);
+    else if ((hWnd = FindWindow("aHiddenFrameClass", NULL)))
+      return(hWnd);
+
+    if (!launchTry)
+    {
+    char    szPath[_MAX_PATH] = "";
+		DWORD   nMAPIERROR; 
+
+      if ((nMAPIERROR = XP_GetInstallLocation(szPath, _MAX_PATH)) != SUCCESS_SUCCESS)
+      {
+        return(NULL); 
+      }
+		
+		  WORD nReturn = XP_CallProcess(szPath, " -MAPICLIENT");
+      launchTry = TRUE;
+    }
+
+    //
+    // Pause for 1/2 a second and try to connect again...
+    //
+#ifdef WIN32
+    Sleep(500);
+#else 
+    Yield();
+#endif        
+
+    timeCount++;
+  }
+
+	return(hWnd);
+}
+
+void
+BuildMemName(LPSTR name, ULONG winSeed)
+{
+  static DWORD    id = 0;
+
+  if (id == 0)
+  {
+    // Seed the random-number generator with current time so that
+    // the numbers will be different every time we run.
+    srand( (unsigned)time( NULL ) );
+    id = rand();
+  }
+
+  wsprintf(name, "MAPI_IPC_SMEM-%d", (winSeed + id++));
+  TRACE("Shared Memory Name = [%s]\n", name);
+}
+
+DWORD 
+ValidateFile(LPCSTR szFile) 
+{
+  	struct _stat buf;
+    int result;
+
+    result = _stat( szFile, &buf );
+    if (result != 0)
+      return(1);
+
+    if (!(buf.st_mode & S_IREAD))
+      return(2);
+
+    return(0);
+}
+
+//
+// return of zero is ok 
+// 1 = MAPI_E_ATTACHMENT_NOT_FOUND
+// 2 = MAPI_E_ATTACHMENT_OPEN_FAILURE
+//
+DWORD
+SanityCheckAttachmentFiles(lpMapiMessage lpMessage)
+{
+  ULONG i;
+  DWORD rc;
+
+  for (i=0; i<lpMessage->nFileCount; i++)
+  {
+    if ((rc = ValidateFile(lpMessage->lpFiles[i].lpszPathName)) != 0)
+    {
+      return(rc);
+    }
+  }
+
+  return(0);
+}
+
+DWORD 
+GetFileCount(LPSTR pFiles, LPSTR delimChar)
+{
+  DWORD   count = 1;
+	if ((!pFiles) || (!*pFiles))
+		return(0);
+
+  for (DWORD i=0; i<strlen(pFiles); i++)
+  {
+    if (pFiles[i] == delimChar[0])
+    {
+      ++count;
+    }
+  }
+
+  return(count);
+}
+
+//
+// Extract a filename from a string
+// Return TRUE if file found, else FALSE
+//
+BOOL
+ExtractFile(LPSTR pFiles, LPSTR delimChar, DWORD fIndex, LPSTR fName)
+{
+  LPSTR   ptr = pFiles;
+  DWORD   loc;
+  DWORD   count = 0;
+
+	if ((!pFiles) || (!*pFiles))
+		return(0);
+
+  // Get to the fIndex'th entry
+  for (loc=0; loc<strlen(pFiles); loc++)
+  {
+    if (count == fIndex)
+      break;
+    if (pFiles[loc] == delimChar[0])
+      count++;
+  }
+
+  if (loc >= strlen(pFiles))    // Got to the end of string!
+    return(FALSE);
+
+  lstrcpy(fName, (LPSTR)pFiles + loc);
+  //
+  // Truncate at 2nd delimiter
+  //
+  for (DWORD i=0; i<strlen(fName); i++)
+  {
+    if (fName[i] == delimChar[0])
+    {
+      fName[i] = '\0';
+      break;
+    }
+  }
+
+  return(TRUE);
+}
+
+ULONG
+GetFileSize(LPSTR fName)
+{
+  struct _stat buf;
+  int result;
+  
+  result = _stat( fName, &buf );
+  if (result != 0)
+    return(0);
+  
+  return(buf.st_size);
+}
+ 
+LPVOID
+LoadBlobToMemory(LPSTR fName)
+{
+  UCHAR     *ptr = NULL;
+  ULONG     bufSize = GetFileSize(fName);
+
+  if (bufSize == 0)
+  {
+    _unlink(fName);
+    return(NULL);
+  }
+
+  ptr = (UCHAR *)malloc( (size_t) bufSize);
+  if (!ptr)
+  {
+    _unlink(fName);
+    return(NULL);
+  }
+
+  HFILE hFile = _lopen(fName, OF_READ);
+  if (hFile == HFILE_ERROR)
+  {
+    _unlink(fName);
+    free(ptr);
+    return(NULL);
+  }
+
+  UINT numRead = _lread(hFile, ptr, (size_t) bufSize);
+  _lclose(hFile);
+
+  if (numRead != bufSize)
+  {
+    _unlink(fName);
+    free(ptr);
+    return(NULL);
+  }
+
+  _unlink(fName);
+	return(ptr);	
+}
+
+LONG
+WriteMemoryBufferToDisk(LPSTR fName, LONG bufSize, LPSTR buf)
+{
+  if (!buf)
+  {
+    return(-1);
+  }
+
+  HFILE hFile = _lcreat(fName, 0);
+  if (hFile == HFILE_ERROR)
+  {
+    return(-1);
+  }
+
+  LONG writeCount = _lwrite(hFile, buf, (size_t) bufSize);
+  _lclose(hFile);
+
+  if (writeCount != bufSize)
+  {
+    _unlink(fName);
+    return(-1);
+  }
+
+  return(0);
+}
+
+LPSTR
+GetTheTempDirectoryOnTheSystem(void)
+{
+ static UCHAR retPath[_MAX_PATH];
+  
+  if (getenv("TEMP"))
+  {
+    lstrcpy((LPSTR) retPath, getenv("TEMP"));  // environmental variable
+  } 
+  else if (getenv("TMP"))
+  {
+    lstrcpy((LPSTR) retPath, getenv("TMP"));  // How about this environmental variable?
+  }
+  else
+  {
+    GetWindowsDirectory((LPSTR) retPath, sizeof(retPath));
+  }
+
+  return((LPSTR) &(retPath[0]));
+}
+
+#ifdef WIN16
+int WINAPI EXPORT ISGetTempFileName(LPCSTR a_pDummyPath,  LPCSTR a_pPrefix, UINT a_uUnique, LPSTR a_pResultName)
+{
+#ifdef GetTempFileName	// we need the real thing comming up next...
+#undef GetTempFileName
+#endif
+	return GetTempFileName(0, a_pPrefix, a_uUnique, a_pResultName);
+}
+#endif
+
+LONG
+GetTempAttachmentName(LPSTR fName) 
+{
+  UINT        res;
+  static UINT uUnique = 1;
+
+  if (!fName)
+    return(-1);
+
+  LPSTR szTempPath = GetTheTempDirectoryOnTheSystem();
+
+TRYAGAIN:
+#ifdef WIN32
+  res = GetTempFileName(szTempPath, "MAPI", uUnique++, fName);
+#else
+  res = ISGetTempFileName(szTempPath, "MAPI", uUnique++, fName);
+#endif
+
+  if (ValidateFile(fName) != 1) 
+  {
+    if (uUnique < 32000)
+    {
+      goto TRYAGAIN;
+    }
+    else
+    {
+      return(-1);
+    }
+  }
+
+  return 0;
+}
+
+// RICHIE - strip all of the HTML stuff out of the message...
+int
+CheckForInlineHTML(char *noteBody, DWORD len, DWORD *curPos, char *newBody, DWORD *realLen)
+{
+  LPSTR   tags[] = {"&nbsp;", "&lt;", "&amp;", NULL};
+  UCHAR   tagsSubst[] = {' ', '<', '&', NULL};
+  int     x = 0;
+
+  while (tags[x])
+  {
+    // should we check for first tag
+    if ( (*curPos+strlen(tags[x])) < len)
+    {
+      if (strncmp(tags[x], noteBody, strlen(tags[x])) == 0)
+      {
+        *curPos += strlen(tags[x]) - 1;
+        newBody[*realLen] = tagsSubst[x];
+        *realLen += 1;
+        return(-1);
+      }
+    }
+
+    ++x;
+  }
+
+  return(0);
+}
+
+//
+// RICHIE - This is also temporary fix for now...
+//
+LPSTR
+StripSignedMessage(LPSTR noteText, DWORD totalCR) 
+{
+char    *newBuf;
+LPSTR   startTag = "<HTML>";
+LPSTR   endTag = "/HTML>";
+DWORD   i;
+DWORD   realLen = 0;
+DWORD   startPos = 0;
+DWORD   len = strlen(noteText);;
+
+  // create a new buffer...
+  newBuf = (char *) malloc((size_t)(len + totalCR));
+  if (!newBuf)
+    return(noteText);
+
+  newBuf[0] = '\0';
+
+  // First, find the start of the HTML for the message...
+  for (i=0; i<len; i++)
+  {
+    // should we check for first tag
+    if ( (i+strlen(startTag)) < len)
+    {
+      if (strncmp(startTag, (noteText + i), strlen(startTag)) == 0)
+      {
+        startPos = i + strlen(startTag);
+        break;
+      }
+    }
+  }
+
+  // Didn't find any HTML start tag
+  if (i == len)
+    return(noteText);
+
+  BOOL    inHTML = FALSE;
+  BOOL    firstChar = FALSE;
+
+  for (i=startPos; i<len; i++)
+  {
+    char  *ptr = (noteText + i);
+
+    if ( ((*ptr == 0x0D) || (*ptr == 0x20)) && (!firstChar) )
+      continue;
+    else
+      firstChar = TRUE;
+
+    // First, check for the end /HTML> tag
+    if ( (i+strlen(endTag)) < len)
+    {
+      if (strncmp(endTag, ptr, strlen(endTag)) == 0)
+      {
+        break;
+      }
+    }
+
+    // If we are in HTML, check for a ">"...
+    if (inHTML)
+    {
+      if (*ptr == '>')
+      {
+        inHTML = FALSE;
+      }
+      continue;
+    }
+
+    // Check for NEW HTML...
+    if (*ptr == '<')
+    {
+      inHTML = TRUE;
+      continue;
+    }
+
+    if (CheckForInlineHTML(ptr, len, &i, newBuf, &realLen))
+      continue;
+
+    newBuf[realLen++] = *ptr;
+    // Tack on a line feed if we hit a CR...
+    if ( *ptr == 0x0D )
+    {
+      newBuf[realLen++] = 0x0A;
+    }
+  }
+
+  // terminate the buffer - reallocate and move on...
+  newBuf[realLen++] = '\0';
+  newBuf = (LPSTR) realloc(newBuf, (size_t) realLen);
+
+  // check if the realloc worked and if so, free old memory and
+  // return...if not, just return the original buffer
+  if (!newBuf)
+  {
+    return(noteText);
+  }
+  else
+  {
+    free(noteText);
+    return(newBuf);
+  }
+}
+
+//
+// RICHIE - this is a temporary fix for now to get rid of
+// html stuff within the text of a message - if there was a
+// valid noteText buffer coming into this call, we need to 
+// free it on the way out.
+//
+LPSTR
+StripHTML(LPSTR noteText)
+{
+  char    *newBuf;
+  LPSTR   signTag = "This is a cryptographically signed message in MIME format.";
+  LPSTR   mimeTag = "This is a multi-part message in MIME format.";
+
+  DWORD   i;
+  DWORD   realLen = 0;
+  DWORD   totalCR = 0;
+
+  // do sanity checking...
+  if ((!noteText) || (!(*noteText)))
+    return(noteText);
+
+  // more sanity checking...
+  DWORD len = strlen(noteText) + 1;
+  if (len <= 0) 
+    return(noteText);
+
+  // Get the number of CR's in this message and add room for
+  // the LF's
+  for (i=0; i<len; i++)
+  {
+    if ( (*(noteText + i)) == 0x0D )
+      ++totalCR;
+  }
+
+  // This is a check for a signed message in the start of a message
+  // check for sign line...    
+  if ( strlen(signTag) < len)
+  {
+    if ( 
+        (strncmp(signTag, noteText, strlen(signTag)) == 0) ||
+        (strncmp(mimeTag, noteText, strlen(mimeTag)) == 0) 
+       )
+    {
+      return( StripSignedMessage(noteText, totalCR) );
+    }
+  }
+
+  // create a new buffer...
+  newBuf = (char *) malloc((size_t)(len + totalCR));
+  if (!newBuf)
+    return(noteText);
+
+  newBuf[0] = '\0';
+
+  BOOL    firstChar = FALSE;
+
+  // Now do the translation for the body of the note...
+  for (i=0; i<len; i++)
+  {
+    char  *ptr = (noteText + i);
+    
+    if ( ((*ptr == 0x0D) || (*ptr == 0x20)) && (!firstChar) )
+      continue;
+    else
+      firstChar = TRUE;
+
+    if (CheckForInlineHTML(ptr, len, &i, newBuf, &realLen))
+      continue;
+
+    newBuf[realLen++] = *ptr;
+    if ( *ptr == 0x0D )
+    {
+      newBuf[realLen++] = 0x0A;
+    }
+  }
+
+  // terminate the buffer - reallocate and move on...
+  newBuf[realLen++] = '\0';
+  newBuf = (LPSTR) realloc(newBuf, (size_t) realLen);
+
+  // check if the realloc worked and if so, free old memory and
+  // return...if not, just return the original buffer
+  if (!newBuf)
+  {
+    return(noteText);
+  }
+  else
+  {
+    free(noteText);
+    return(newBuf);
+  }
+}
+
+#ifdef WIN16
+
+void
+GetWin16TempName(LPSTR realFileName, LPSTR tempPath, 
+				 LPSTR szTempFileName, UINT uUnique)
+{
+  char	 *dotPtr = strrchr(realFileName, '.');
+  if (dotPtr != NULL)
+  {
+    *dotPtr = '\0';
+  }                
+  
+  int nameLen = lstrlen(realFileName); 
+  if (dotPtr != NULL)
+  {
+    *dotPtr = '.';
+  }
+  
+  if (nameLen <= 7)
+  {
+ 	wsprintf(szTempFileName, "%s\\%d%s", tempPath, uUnique, realFileName);
+  }
+  else
+  {
+  	wsprintf(szTempFileName, "%s\\%d%s", tempPath, uUnique, (realFileName + 1));
+  }
+}
+
+#endif
+
+#define MAXTRY  9999  // How many times do we try..
+
+UINT
+GetTempMailNameWithExtension(LPSTR szTempFileName, 
+                             LPSTR origName)
+{
+  UINT        res = 1;
+  UINT        uUnique = 0;
+  char        *szTempPath = GetTheTempDirectoryOnTheSystem();
+  char        *tmpPtr;
+  char        *realFileName = NULL;
+
+  if ( (origName != NULL) && (*origName != '\0') )
+  {
+    tmpPtr = origName;
+  }
+  else
+  {
+    tmpPtr = szTempFileName;
+  }
+
+  realFileName = strrchr(tmpPtr, '\\');
+  if (!realFileName)
+    realFileName = tmpPtr;
+  else
+    realFileName++;
+
+TRYAGAIN:
+
+#ifdef WIN32
+  if (uUnique == 0)
+  {
+    wsprintf(szTempFileName, "%s\\%s", szTempPath, realFileName);
+  }
+  else
+  {
+    wsprintf(szTempFileName, "%s\\%d_%s", 
+                szTempPath, uUnique, realFileName);
+  }
+#else // WIN16
+  if ( (uUnique == 0) && (strlen(realFileName) <= 12) )
+  {
+    wsprintf(szTempFileName, "%s\\%s", szTempPath, realFileName);
+  }
+  else
+  {              
+    if (uUnique < 10)
+    {
+      GetWin16TempName(realFileName, szTempPath, szTempFileName, uUnique);
+    }
+    else 
+    { 
+      res = ISGetTempFileName(szTempPath, "ns", uUnique++, szTempFileName);    
+    }
+
+    // Now add the correct extension...
+    char *origExt = strrchr(realFileName, '.');
+    if (origExt != NULL)
+    {
+      char *tmpExt = strrchr(szTempFileName, '.');
+      if (tmpExt != NULL)
+      {
+        origExt++;
+        tmpExt++;
+
+        while ( ((tmpExt) && (origExt)) && (*origExt != '\0') )
+        {
+          *tmpExt = *origExt;
+          tmpExt++;
+          origExt++;
+        }
+
+        *tmpExt = '\0';
+      }
+    }
+  }
+#endif
+
+  if ( (ValidateFile(szTempFileName) != 1) && (uUnique < MAXTRY) )
+  {
+    uUnique++;
+    if (uUnique >= MAXTRY)
+      return(1);
+    goto TRYAGAIN;
+  }
+
+  return res;
+}
+
+#define kMaxTempFiles   10
+#define kMaxListLength  (10 * _MAX_PATH)
+
+void GetTempFiles(LPSTR pBuf, int lenBuf)
+{
+  if (!GetConfigInfoStr(szMapiSection, szTempFiles, pBuf, lenBuf, HKEY_ROOT))
+  {
+    *pBuf = 0;
+  }
+}
+
+void WriteTempFiles(LPSTR pBuf)
+{
+  SetConfigInfoStr(szMapiSection, szTempFiles, pBuf, HKEY_ROOT);
+}
+
+void  AddTempFile(LPCSTR pFileName)
+{
+  if ( (!pFileName) || (pFileName[0] == '\0') )
+    return;
+
+  char *files = (char *)malloc(kMaxListLength);
+
+  if (!files)
+    return;
+
+  GetTempFiles(files, kMaxListLength);
+  if ((lstrlen(files) + lstrlen(pFileName) + 2) >= kMaxListLength)
+  {
+    free(files);
+    return;
+  }
+
+  if (lstrlen(files) != 0)
+  {
+          lstrcat(files, ";");
+  }
+
+  lstrcat(files, pFileName);
+  WriteTempFiles(files);
+  free(files);
+}
+
+void DeleteFirstTempFile(LPSTR pFiles)
+{
+  if (!*pFiles)
+    return;
+  LPSTR pTemp = strchr(pFiles, ';');
+  if (pTemp)
+  {
+    *pTemp = 0;
+  }
+ 
+//#ifndef _DEBUG  
+  _unlink(pFiles);
+//#endif
+
+  if (pTemp)
+  {
+    memmove(pFiles, pTemp + 1, lstrlen(pTemp + 1) + 1);
+  }
+  else
+  {
+    *pFiles = 0;
+  }
+}
+
+void 
+RemoveAllTempFiles(void)
+{
+  char *files = (char *)malloc(kMaxListLength);
+
+  if (!files)
+    return;
+
+  GetTempFiles(files, kMaxListLength);
+
+  while (*files)
+  {
+    DeleteFirstTempFile(files);
+  }
+
+  WriteTempFiles(files);
+  free(files);
+}
+
+void CheckAgeTempFiles(void)
+{
+  char *files = (char *)malloc(kMaxListLength);
+
+  if (!files)
+    return;
+
+  GetTempFiles(files, kMaxListLength);
+  int i = 0;
+  LPSTR pTemp = files;
+  while (TRUE)
+  {
+    pTemp = strchr(pTemp, ';');
+    if (!pTemp)
+      break;
+    ++pTemp;
+    ++i;
+  }
+
+  if (i >= 10)
+  {
+    DeleteFirstTempFile(files);
+    WriteTempFiles(files);
+  }
+
+  free(files);
+}
+
+void 
+CleanupMAPITempFiles(void)
+{
+  if (Is_16_OR_32_BIT_CommunitorRunning() == 0)
+  {
+    RemoveAllTempFiles();           // if Communicator not running, clean up all the temp files
+  }
+  else
+  {
+    CheckAgeTempFiles();
+  }
+}
+
+void *
+CleanMalloc(size_t mallocSize)
+{
+  void *ptr = malloc(mallocSize);
+  if (!ptr)
+    return(NULL);
+
+  memset(ptr, 0, mallocSize);
+  return(ptr);
+}
+
+void
+SafeFree(void *ptr)
+{
+  if (!ptr)
+    return;
+
+  free(ptr);
+  ptr = NULL;
+}

mozilla/mailnews/mapi/old/mapi32/mapiutl.h

@@ -0,0 +1,89 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+#ifndef __UTILS_
+#define __UTILS_
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#ifndef MAPI_OLE	// Because MSFT doesn't do this for us :-(
+#include <mapi.h>
+#endif
+
+//
+// Utility functions...
+//
+void    SetLoggingEnabled(BOOL val);    // Set a logging enabled flag
+void    LogString(LPCSTR pStr1);        // Log a string to a file...
+void    BuildMemName(LPSTR name, ULONG winSeed);  // Shared memory name
+HWND    GetCommunicatorIPCWindow(void);    // Get the IPC window we will use...
+DWORD   SanityCheckAttachmentFiles(lpMapiMessage lpMessage); // Check attachments
+DWORD   ValidateFile(LPCSTR szFile);       // Is this a valid file - 0=Yes 1 = NOT_FOUND 2 = OPEN_FAILURE
+
+DWORD   GetFileCount(LPSTR pFiles, LPSTR delimChar); // Get File count from string of file1;file2, etc..
+BOOL    ExtractFile(LPSTR pFiles, LPSTR delimChar, DWORD fIndex, LPSTR fName); // Extract a filename from a string
+
+LPVOID  LoadBlobToMemory(LPSTR fName);  // Load the blob into memory!
+LONG    GetTempAttachmentName(LPSTR fName); // Get a temp file name and put it in fName
+
+UINT    GetTempMailNameWithExtension(LPSTR szTempFileName, LPSTR origName);
+void    CleanupMAPITempFiles(void);
+void  AddTempFile(LPCSTR pFileName);
+
+void    *CleanMalloc(size_t mallocSize);
+void    SafeFree(void *ptr);
+
+//
+// RICHIE - this is a temporary fix for now to get rid of
+// html stuff within the text of a message - if there was a
+// valid noteText buffer coming into this call, we need to 
+// free it on the way out.
+//
+LPSTR   StripHTML(LPSTR noteText);
+
+//
+// Write a buffer to disk
+// Return 0 on success -1 on failure
+//
+LONG    WriteMemoryBufferToDisk(LPSTR fName, LONG bufSize, LPSTR buf); 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __UTILS_

mozilla/mailnews/mapi/old/mapi32/port.h

@@ -0,0 +1,303 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+
+#ifndef PORT_H
+#define PORT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*****************************************************************\
+ *                                                               *
+ *  PORT.H                                                       *
+ *                                                               *
+ *  Win16/Win32 portability stuff                                *
+ *                                                               *
+ *  A.Sokolsky                                                   *
+ *      3.10.94 distilled into this header                       *
+ *                                                               *
+\*****************************************************************/
+
+/*
+ * calling conventions
+ */
+#include <assert.h>
+                                                      
+                                                      
+#ifndef CDECL
+#define CDECL __cdecl
+#endif  // CDECL
+
+#ifndef PASCAL
+#define PASCAL __pascal
+#endif  // PASCAL
+
+#ifdef FASTCALL
+#error FASTCALL defined
+#endif // FASTCALL
+
+
+#ifdef NDEBUG
+#define FASTCALL __fastcall
+#else
+#define FASTCALL PASCAL
+#endif // NDEBUG   
+
+
+
+#ifndef HWND2DWORD
+#  ifdef WIN32
+#    define HWND2DWORD(X_hWnd) ( (DWORD)(X_hWnd) )
+#  else // WIN16
+#    define HWND2DWORD(X_hWnd) ( (DWORD)MAKELONG(((WORD)(X_hWnd)), 0) )
+#  endif
+#endif // HWND2DWORD
+
+
+/*
+ * WIN16 - WIN32 compatibility stuff
+ */
+
+#ifdef WIN32
+
+# define DLLEXPORT    __declspec( dllexport )
+# define EXPORT
+# define LOADDS
+# define HUGE
+# ifndef FAR
+#  define FAR
+# endif // FAR
+# ifndef NEAR
+#  define NEAR
+# endif // NEAR 
+# ifdef UNICODE
+#  define SIZEOF(x)   (sizeof(x)/sizeof(WCHAR))
+# else
+#  define SIZEOF(x)   sizeof(x)
+# endif
+
+#else  // !WIN32 == WIN16
+
+# define DLLEXPORT    
+# define EXPORT       __export
+# define LOADDS       __loadds
+# define HUGE         __huge
+# ifndef FAR
+#   define FAR        __far
+#   define NEAR       __near
+# endif  // FAR
+# define CONST const
+# define SIZEOF(x)    sizeof(x)
+# define CHAR char
+# define TCHAR char
+# define WCHAR char
+# ifndef LPTSTR
+#   define LPTSTR LPSTR
+# endif
+# ifndef LPCTSTR 
+#   define LPCTSTR LPCSTR
+# endif
+# define UNREFERENCED_PARAMETER(x) x;
+# ifndef TEXT
+#   define TEXT(x) x
+# endif
+# define GetWindowTextW GetWindowText
+# define lstrcpyW lstrcpy   
+
+# define BN_DBLCLK BN_DOUBLECLICKED // ~~MRJ needed for custom control.
+// ~~MRJ begin Win95 backward compat section
+# define LPWSTR LPSTR
+# define LPCWSTR LPCSTR
+
+// button check state for WIN16
+#ifndef BST_UNCHECKED
+#define BST_UNCHECKED      0x0000
+#endif
+
+#ifndef BST_CHECKED
+#define BST_CHECKED        0x0001
+#endif
+
+
+#ifndef WIN95_COMPAT
+#  define WIN95_COMPAT
+#endif
+
+// ~~MRJ end Win95 compat section.
+
+// critical section API stubs
+typedef DWORD CRITICAL_SECTION;
+typedef CRITICAL_SECTION FAR * LPCRITICAL_SECTION; 
+#ifdef __cplusplus
+inline void InitializeCriticalSection(LPCRITICAL_SECTION lpSection) {}
+inline void DeleteCriticalSection(LPCRITICAL_SECTION lpSection) {}
+inline void EnterCriticalSection(LPCRITICAL_SECTION lpSection) {}
+inline void LeaveCriticalSection(LPCRITICAL_SECTION lpSection) {} 
+#endif // __cplusplus 
+
+// Added for nssock16 ---Neeti
+#ifndef ZeroMemory
+#include <memory.h>
+#define ZeroMemory(PTR, SIZE) memset(PTR, 0, SIZE)
+#endif // ZeroMemory
+
+#endif // WIN16
+
+/*
+ * unix - windows compatibility stuff
+ */
+typedef DWORD u_int32;
+typedef WORD  u_int16;
+typedef BYTE  u_int8;
+#ifdef WIN32
+typedef short int Bool16;
+#else  // WIN16
+typedef BOOL  Bool16;
+#endif // WIN16
+
+/*
+ * Cross Platform Compatibility
+ */
+#ifndef UNALIGNED
+# ifdef _M_ALPHA
+#  define UNALIGNED __unaligned
+# else  // !_M_ALPHA
+#  define UNALIGNED
+# endif // !_M_ALPHA
+#endif  // UNALIGNED
+
+//
+// RICHIE - for the Alpha port
+//
+#ifdef _M_ALPHA
+# undef pascal
+# undef PASCAL
+# if (_MSC_VER >= 800) || defined(_STDCALL_SUPPORTED)
+#  define pascal __stdcall
+#  define PASCAL __stdcall
+# else
+#  define PASCAL
+# endif
+#endif
+
+
+/*
+ * Useful Types
+ */
+typedef char HUGE *HPSTR;
+typedef const char HUGE *HPCSTR;
+typedef unsigned char HUGE *HPBYTE;
+typedef WORD HUGE *HPWORD;
+typedef UINT FAR *LPUINT;
+typedef BOOL (CALLBACK *USERABORTPROC)();
+typedef BOOL (CALLBACK *PROGRESSPROC)(UINT uPos, UINT uRange);
+typedef int INT;   // ~~MRJ a function needed this defined.
+typedef MINMAXINFO FAR *LPMINMAXINFO; // ~~MRJ 
+
+//
+// stuff missing from windows.h
+//
+#ifndef MAKEWORD
+#define MAKEWORD(low, high)    ((WORD)(((BYTE)(low)) | (((WORD)((BYTE)(high))) << 8)))
+#endif // MAKEWORD
+
+#ifdef WIN32
+# ifndef hmemcpy
+#  define hmemcpy memcpy
+# endif // !defined(hmemcpy)
+# define _fmemset memset
+
+# include <malloc.h>
+
+#ifdef __cplusplus
+
+inline BOOL IsGDIObject(HGDIOBJ hObj) { return (hObj != 0); }
+inline void *_halloc(long num, unsigned int size) { return malloc(num * size); }
+inline void _hfree( void *memblock ) { free(memblock); } 
+/*
+inline BOOL IsInstance(HINSTANCE hInst) {
+# ifdef WIN32
+    return (hInst != 0);
+# else // WIN16
+    return (hInst > HINSTANCE_ERROR);
+# endif  
+}  
+*/
+
+#endif // __cplusplus
+
+  WINUSERAPI HANDLE WINAPI LoadImageA(HINSTANCE, LPCSTR, UINT, int, int, UINT);
+
+#endif // WIN32
+
+#ifdef __cplusplus 
+inline BOOL IsInstance(HINSTANCE hInst) {
+# ifdef WIN32
+    return (hInst != 0);
+# else // WIN16
+    return (hInst > HINSTANCE_ERROR);
+# endif  
+} 
+inline void SetWindowSmallIcon(HINSTANCE hInst, HWND hWnd, UINT uIconResourceId) {
+#ifdef WIN32
+# ifndef WM_SETICON
+#   define WM_SETICON 0x0080
+# endif  // WM_SETICON
+# ifndef IMAGE_ICON
+#   define IMAGE_ICON 1
+# endif
+  assert(IsWindow(hWnd));
+  HICON hIcon = (HICON)LoadImageA(hInst, MAKEINTRESOURCE(uIconResourceId), IMAGE_ICON,
+    16, 16, 0);
+  if(NULL != hIcon) {
+    SendMessage(hWnd, WM_SETICON, FALSE, (LPARAM)hIcon);
+  } else {
+    HICON hIcon = LoadIcon(hInst, MAKEINTRESOURCE(uIconResourceId));
+    assert(hIcon != 0);
+    SendMessage(hWnd, WM_SETICON, FALSE, (LPARAM)hIcon);
+  }
+#endif // WIN32
+}
+#endif // __cplusplus
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* PORT_H */

mozilla/mailnews/mapi/old/mapi32/resource.h

@@ -0,0 +1,54 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//{{NO_DEPENDENCIES}}
+// Microsoft Developer Studio generated include file.
+// Used by mapi32.rc
+//
+#define ID_DIALOG_QAHOOK                101
+#define ID_DIALOG_MAPI                  101
+#define ID_ICON_APP                     102
+
+// Next default values for new objects
+// 
+#ifdef APSTUDIO_INVOKED
+#ifndef APSTUDIO_READONLY_SYMBOLS
+#define _APS_NEXT_RESOURCE_VALUE        103
+#define _APS_NEXT_COMMAND_VALUE         40001
+#define _APS_NEXT_CONTROL_VALUE         1000
+#define _APS_NEXT_SYMED_VALUE           101
+#endif
+#endif

mozilla/mailnews/mapi/old/mapi32/smem.cpp

@@ -0,0 +1,172 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+//  smem.cpp - This deals with all shared memory functions needed for 
+//  the MAPI component of Communicator
+//  Written by: Rich Pizzarro (rhp@netscape.com)
+//  November 1997
+//
+#include <windows.h>
+#include <windowsx.h>
+
+#include "mapismem.h"
+
+#ifndef ZeroMemory
+#include <memory.h>
+#define ZeroMemory(PTR, SIZE) memset(PTR, 0, SIZE)
+#endif // ZeroMemory
+
+// 
+// *create new* shared memory chunk 
+// once this is created, use the pointer
+// to the segment to to store data 
+// e.g.: 
+//     lpString = "string for communicator"; 
+//     lstrcpy((LPSTR)pData->m_buf[0], lpString); 
+//  
+CSharedMem *
+NSCreateSharedMemory(DWORD memSize, LPCTSTR memName, HANDLE *hSharedMemory)
+{
+#ifdef WIN32
+
+  BOOL bExistedBefore;
+  CSharedMem *pData;
+
+  LPCTSTR szObjectName = memName; 
+  DWORD dwSize = sizeof(CSharedMem) + memSize; 
+  *hSharedMemory = CreateFileMapping( 
+    (HANDLE)0xFFFFFFFF,0,PAGE_READWRITE,0,dwSize,szObjectName); 
+  if(*hSharedMemory == 0) 
+  { 
+    return NULL; 
+  } 
+  bExistedBefore = (GetLastError() == ERROR_ALREADY_EXISTS); 
+  if(bExistedBefore) 
+  { 
+  	return NULL;
+  } 
+
+  pData = (CSharedMem *)MapViewOfFile( 
+            *hSharedMemory, FILE_MAP_ALL_ACCESS, 0, 0, 0); 
+  if(pData == NULL) 
+  { 
+    return NULL; 
+  } 
+
+  ZeroMemory(pData, dwSize); 
+  pData->m_dwSize = memSize; 
+
+  return pData;
+#else
+  CSharedMem 	*sMemChunk = NULL;
+  DWORD dwSize = memSize = (sizeof(CSharedMem) + memSize); 
+
+  if (sMemChunk != NULL)
+	  return(sMemChunk);
+
+  sMemChunk = (CSharedMem *) GlobalAllocPtr(GMEM_MOVEABLE, dwSize);
+  ZeroMemory(sMemChunk, (size_t) dwSize);
+  sMemChunk->m_dwSize = dwSize;   // Missing in Communicator code!
+  return(sMemChunk);
+
+#endif // WIN32
+}
+
+// 
+// *open existing* shared memory chunk 
+// once you have the pointer to the new segment 
+// use this pointer to access data, e.g.: 
+// 
+CSharedMem *
+NSOpenExistingSharedMemory(LPCTSTR memName, HANDLE *hSharedMemory)
+{
+#ifdef WIN32
+  CSharedMem *pData;
+  DWORD dwSize;
+
+  LPCTSTR szObjectName = memName; 
+  *hSharedMemory = OpenFileMapping( 
+    PAGE_READWRITE,FALSE,szObjectName); 
+  if(*hSharedMemory == 0) 
+  { 
+    return NULL; 
+  } 
+
+  pData = (CSharedMem *)MapViewOfFile( 
+              *hSharedMemory,FILE_MAP_ALL_ACCESS,0,0,0); 
+  if(pData == NULL) 
+  { 
+    return NULL; 
+  } 
+  
+  dwSize = pData->m_dwSize; 
+  return pData;
+#else
+
+  return(NULL);   // In Win16, this is really meaningless...
+
+#endif
+}  
+
+// 
+// to close shared memory segment
+// 
+void
+NSCloseSharedMemory(CSharedMem *pData, HANDLE hSharedMemory)
+{
+#ifdef WIN32
+  if(pData != 0) 
+  { 
+    UnmapViewOfFile(pData); 
+    pData = 0; 
+  } 
+
+  if(hSharedMemory != 0) 
+  { 
+    CloseHandle(hSharedMemory); 
+    hSharedMemory = 0; 
+  } 
+#else
+
+	if (pData != NULL)
+	{
+		GlobalFreePtr(pData);
+		pData = NULL;
+	}
+
+#endif // WIN32
+}

mozilla/mailnews/mapi/old/mapi32/trace.cpp

@@ -0,0 +1,68 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+#include <windows.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include <tchar.h>
+#include "trace.h"
+
+#ifdef _DEBUG 
+
+#ifndef WIN16
+void CDECL AfxTrace(LPCTSTR lpszFormat, ...)
+#else                                       
+void CDECL AfxTrace(LPCSTR lpszFormat, ...)
+#endif
+{
+  va_list args;
+	va_start(args, lpszFormat);
+
+	int nBuf;
+	TCHAR szBuffer[512];
+
+	nBuf = _vstprintf(szBuffer, lpszFormat, args);
+	va_end(args);
+  OutputDebugString(szBuffer); 
+  return;
+}
+
+BOOL AfxAssertFailedLine(LPCSTR lpszFileName, int nLine)
+{    
+	return TRUE;
+}
+
+#endif

mozilla/mailnews/mapi/old/mapi32/trace.h

@@ -0,0 +1,81 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+#include <windows.h>
+
+#ifdef _DEBUG
+BOOL AfxAssertFailedLine(LPCSTR lpszFileName, int nLine);
+
+#ifndef WIN16
+void CDECL AfxTrace(LPCTSTR lpszFormat, ...);
+#else
+void CDECL AfxTrace(LPCSTR lpszFormat, ...);
+#endif
+
+#define TRACE              ::AfxTrace
+#define THIS_FILE          __FILE__
+#define ASSERT(f) \
+	do \
+	{ \
+	if (!(f) && AfxAssertFailedLine(THIS_FILE, __LINE__)) \
+		AfxDebugBreak(); \
+	} while (0) \
+
+#define VERIFY(f)          ASSERT(f)
+#define TRACE_FN(name) LogFn __logFn(name)
+class LogFn
+{
+public:
+	LogFn(LPCSTR pFnName) {m_pFnName = pFnName; TRACE("--%s: In--\n", pFnName);}
+	~LogFn() {TRACE("--%s: Out--\n", m_pFnName);}
+private:
+	LPCSTR m_pFnName;
+};
+#else
+// NDEBUG
+#define ASSERT(f)          ((void)0)
+#define VERIFY(f)          ((void)(f))
+#define ASSERT_VALID(pOb)  ((void)0)
+#define DEBUG_ONLY(f)      ((void)0)   
+#ifdef WIN32
+inline void CDECL AfxTrace(LPCTSTR, ...) { }
+#else
+inline void CDECL AfxTrace(LPCSTR, ...) { }
+#endif
+#define TRACE              1 ? (void)0 : ::AfxTrace
+#define TRACE_FN(name)
+#endif // _DEBUG
+

mozilla/mailnews/mapi/old/mapi32/xpapi.cpp

@@ -0,0 +1,347 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+//  XPAPI.CPP
+//  API implementation file for mapi16.dll and mapi32.dll
+//  Written by: Rich Pizzarro (rhp@netscape.com)
+//  November 1997
+//
+#include <windows.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include "xpapi.h"
+#include "mapiutl.h"
+
+WORD LOAD_DS XP_CallProcess(LPCSTR pPath, LPCSTR pCmdLine)
+{            
+	WORD wReturn = 0;
+#ifndef WIN16
+	STARTUPINFO startupInfo;
+	PROCESS_INFORMATION processInfo;
+
+	memset(&startupInfo, 0, sizeof(startupInfo));
+	startupInfo.cb = sizeof(startupInfo);
+	if (wReturn = CreateProcess(pPath, (LPTSTR)pCmdLine, NULL, NULL, FALSE, CREATE_DEFAULT_ERROR_MODE | CREATE_NEW_PROCESS_GROUP, NULL, NULL, &startupInfo, &processInfo))
+	{
+		WaitForInputIdle(processInfo.hProcess, 120000);
+	}
+#else       
+	// char szMsg[80];	
+	char szExecute[512];
+	lstrcpy(szExecute, pPath);
+	lstrcat(szExecute, " ");
+	lstrcat(szExecute, pCmdLine);
+	wReturn = WinExec(szExecute,SW_SHOW);
+	
+	if (wReturn < 32) 
+	{
+	    wReturn = 0;
+	}
+#endif
+	return wReturn;
+}
+
+HKEY LOAD_DS RegOpenParent(LPCSTR pSection, HKEY hRootKey, REGSAM access)
+{
+	HKEY hKey;
+#ifndef WIN16
+	if (RegOpenKeyEx(hRootKey, pSection, 0, access, &hKey) != ERROR_SUCCESS)
+	{
+		return(NULL);
+	}        
+#else
+    if (RegOpenKey(hRootKey, pSection, &hKey) != ERROR_SUCCESS)
+    {
+    	return(NULL);
+    }
+#endif
+	return(hKey);
+}
+
+HKEY LOAD_DS RegCreateParent(LPCSTR pSection, HKEY hMasterKey)
+{
+	HKEY hKey;
+	if (RegCreateKey(hMasterKey, pSection, &hKey) != ERROR_SUCCESS)
+	{
+		return(NULL);
+	}        
+	return(hKey);
+}
+
+BOOL LOAD_DS GetConfigInfoStr(LPCSTR pSection, LPCSTR pKey, LPSTR pBuf, int lenBuf, HKEY hMasterKey)
+{
+	HKEY hKey;
+	hKey = RegOpenParent(pSection, hMasterKey, KEY_QUERY_VALUE);
+	if (!hKey)
+	{
+		return(FALSE);
+	}
+
+	DWORD len = (DWORD)lenBuf;
+#ifndef WIN16
+	BOOL retVal = (RegQueryValueEx(hKey, pKey, NULL, NULL, (LPBYTE)pBuf, &len) == ERROR_SUCCESS);
+#else
+	BOOL retVal = (RegQueryValue(hKey, pKey, pBuf, (long far*)&len) == ERROR_SUCCESS);
+#endif
+	RegCloseKey(hKey);
+	return(retVal);
+}
+
+BOOL LOAD_DS GetConfigInfoNum(LPCSTR pSection, LPCSTR pKey, DWORD* pVal, HKEY hMasterKey)
+{
+	HKEY hKey;
+	hKey = RegOpenParent(pSection, hMasterKey, KEY_QUERY_VALUE);
+	if (!hKey)
+	{
+		return(FALSE);
+	}
+
+	DWORD len = sizeof(DWORD);
+#ifndef WIN16
+	BOOL retVal = (RegQueryValueEx(hKey, pKey, NULL, NULL, (LPBYTE)pVal, &len) == ERROR_SUCCESS);
+#else
+	BOOL retVal = (RegQueryValue(hKey, pKey, (char far*)pVal, (long far*)&len) == ERROR_SUCCESS);
+#endif
+	RegCloseKey(hKey);
+	return(retVal);
+}
+
+BOOL LOAD_DS SetConfigInfoStr(LPCSTR pSection, LPCSTR pKey, LPSTR pStr, HKEY hMasterKey)
+{
+	HKEY hKey;
+	hKey = RegCreateParent(pSection, hMasterKey);
+	if (!hKey)
+	{
+		return(FALSE);
+	}
+#ifndef WIN16
+	BOOL retVal = (RegSetValueEx(hKey, pKey, 0, REG_SZ, (LPBYTE)pStr, lstrlen(pStr) + 1) == ERROR_SUCCESS);
+#else
+	BOOL retVal = (RegSetValue(hKey, pKey, REG_SZ, pStr, lstrlen(pStr) + 1) == ERROR_SUCCESS);
+#endif
+	RegCloseKey(hKey);
+	return(retVal);
+}
+
+
+BOOL LOAD_DS XP_GetInstallDirectory(LPCSTR pcurVersionSection, LPCSTR pInstallDirKey, LPSTR path, UINT nSize, HKEY hKey)
+{   
+#ifdef WIN32   
+	if (!GetConfigInfoStr(pcurVersionSection, pInstallDirKey, path, nSize, hKey))
+	{  
+		return FALSE;
+	}
+	else
+	{
+		return TRUE;
+	}       
+#else
+	if ( 0 < GetPrivateProfileString(pcurVersionSection, pInstallDirKey,"ERROR", path, nSize, szNetscapeINI))
+	{
+		return TRUE;
+	}
+	else
+	{
+		return FALSE;
+	}
+#endif
+}
+
+
+BOOL LOAD_DS XP_GetVersionInfoString(LPCSTR pNavigatorSection, LPCSTR pCurrentVersionKey, LPSTR pcurVersionStr, UINT nSize, HKEY hKey)
+{ 
+#ifdef WIN32
+	if (!GetConfigInfoStr(pNavigatorSection, pCurrentVersionKey, pcurVersionStr, nSize, HKEY_LOCAL_MACHINE))
+	{
+		return FALSE;
+	}               
+	else
+	{
+		return TRUE;
+	}
+#else 
+	if ( 0 < GetPrivateProfileString(pNavigatorSection, pCurrentVersionKey,"ERROR", pcurVersionStr, nSize, szNetscapeINI))
+	{
+		return TRUE;
+	}
+	else
+	{
+		return FALSE;
+	}
+#endif
+
+}   
+
+DWORD LOAD_DS XP_GetInstallLocation(LPSTR pPath, UINT nSize)
+{           
+char curVersionStr[256]; 
+char curVersionSection[256];
+
+  if (!pPath) 
+    return  MAPI_E_LOGON_FAILURE;
+  
+#ifdef WIN32
+  if (!XP_GetVersionInfoString(szNavigatorSection, szCurrentVersionKey, curVersionStr, 
+    sizeof(curVersionStr), HKEY_LOCAL_MACHINE))
+  {
+    return (MAPI_E_LOGON_FAILURE);
+  }
+  
+  wsprintf(curVersionSection, szNavigatorCurVersionSection, curVersionStr);
+		
+  if (!XP_GetInstallDirectory(curVersionSection, szInstallDirKey, pPath, 
+    nSize, HKEY_LOCAL_MACHINE))
+  {
+    return (MAPI_E_ACCESS_DENIED);
+    
+  }
+  
+  lstrcat(pPath, "\\");
+  lstrcat(pPath, "Program\\netscape.exe");
+  
+  return SUCCESS_SUCCESS;
+#else
+  if (32 == Is_16_OR_32_BIT_CommunitorRunning())
+  {   
+    if (!GetConfigInfoStr("snews\\shell\\open", "command", curVersionStr, sizeof(curVersionStr), HKEY_CLASSES_ROOT))
+    {
+      return (MAPI_E_ACCESS_DENIED);
+    }
+    else
+    {	
+      char *pFind = strstr(curVersionStr,"-h");
+      
+      if (pFind)
+      {
+        *pFind=0;
+        lstrcpy(pPath,curVersionStr);
+      }
+      else
+      {
+        return (MAPI_E_ACCESS_DENIED);
+      }
+    }
+    
+    return SUCCESS_SUCCESS;
+  }
+  else //setup up to start navstart since we are a sixteen bit DLL.
+  {
+    if (!XP_GetVersionInfoString(szNavigatorSection, szCurrentVersionKey, curVersionStr, sizeof(curVersionStr), HKEY_LOCAL_MACHINE))
+    {
+      return (MAPI_E_LOGON_FAILURE);
+    }
+    
+    wsprintf(curVersionSection, szNavigatorCurVersionSection, curVersionStr);
+    
+    if (!XP_GetInstallDirectory(curVersionSection, szInstallDirKey, pPath,nSize, HKEY_LOCAL_MACHINE))
+    {
+      return (MAPI_E_ACCESS_DENIED);		
+    }
+    
+    lstrcat(pPath, "\\");
+    lstrcat(pPath, "NAVSTART.EXE");
+    return SUCCESS_SUCCESS;	
+  }
+#endif
+}
+
+int LOAD_DS Is_16_OR_32_BIT_CommunitorRunning()
+{
+  if (FindWindow("AfxFrameOrView", NULL) && !FindWindow("aHiddenFrameClass", NULL))
+		return(16);
+	else if (FindWindow("aHiddenFrameClass", NULL))
+		return(32);
+	else 
+		return 0;
+}
+
+// size of buffer to use for copying files.
+#define COPYBUFSIZE 1024
+
+#ifdef WIN16
+     
+BOOL Win16CopyFile(LPCSTR a_Src, LPCSTR a_Dest, BOOL a_bOverwrite)
+{
+	OFSTRUCT ofSrc, ofDest;
+	HFILE hSrc, hDest;
+	BOOL bResult;
+	
+	ofDest.cBytes = ofSrc.cBytes = sizeof(OFSTRUCT);
+	hDest = OpenFile(a_Dest, &ofDest, OF_EXIST);
+	if (hDest != HFILE_ERROR && !a_bOverwrite)
+		bResult = FALSE;	// file exists but caller doesn't want file overwritten
+	else { // file either doesn't exist, or caller wants it overwritten.
+		hSrc = OpenFile(a_Src, &ofSrc, OF_READ);
+		hDest = OpenFile(a_Dest, &ofDest, OF_WRITE | OF_CREATE);
+		if (hSrc != HFILE_ERROR && hDest != HFILE_ERROR) {
+			unsigned char buf[COPYBUFSIZE];
+			UINT bufsize =  COPYBUFSIZE;
+			UINT bytesread;
+			
+			bResult = TRUE;			
+			while (0 != (bytesread = _lread(hSrc, (LPVOID)buf, bufsize))) {
+				if ((bytesread == HFILE_ERROR) || 	// check for read error...
+											// and write error
+					(bytesread != _lwrite(hDest, (LPVOID)buf, bytesread))) {
+					bResult = FALSE; // could be out of diskspace
+					break;
+				}
+			}
+		}
+		else
+			bResult = FALSE;
+
+		if (hSrc != HFILE_ERROR)
+			_lclose(hSrc);
+		if (hDest != HFILE_ERROR)
+			_lclose(hDest);
+	}
+			
+	return bResult;
+}
+
+#endif  // WIN16
+
+BOOL LOAD_DS 
+XP_CopyFile(LPCSTR lpExistingFile, LPCSTR lpNewFile, BOOL bFailifExist)
+{                                                  
+#ifdef WIN32
+  return	CopyFile(lpExistingFile, lpNewFile, bFailifExist);
+#else                                                             
+  return    Win16CopyFile(lpExistingFile, lpNewFile, TRUE);
+#endif
+}    

mozilla/mailnews/mapi/old/mapi32/xpapi.h

@@ -0,0 +1,138 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+//  Various routines for MAPI functions.
+//  Written by: Rich Pizzarro (rhp@netscape.com)
+//  November 1997
+//
+#ifndef __XPAPI_H
+#define __XPAPI_H
+
+#ifdef WIN16
+
+#include <string.h>
+#include <direct.h>
+#include <shellapi.h>
+#include <stdlib.h>
+#else
+#include <winreg.h>
+#endif 
+ 
+#ifdef WIN16
+extern "C" {
+#ifndef MAPI_OLE	// Because MSFT doesn't do this for us :-(
+#include <mapi.h>
+#endif 
+}           
+#else
+//#include <mapi.h>
+#endif
+
+
+#ifdef WIN32
+#define MAPI_IMPLEMENT(param) param PASCAL 
+#define LOAD_DS
+#else        
+#define LOAD_DS 	__loadds
+#define MAPI_IMPLEMENT(param) extern "C" param FAR PASCAL
+ 
+#endif   
+
+#ifdef WIN16
+#define _MAX_PATH 				260  /* max. length of full pathname*/
+#define MAPI_E_LOGON_FAILURE  	3 
+#define MAPI_E_ACCESS_DENIED	6  
+#define INVALID_HANDLE_VALUE 	(HANDLE)-1  
+#define KEY_QUERY_VALUE 		0x0001  
+#define HKEY_LOCAL_MACHINE 		((HKEY)0x80000002)
+#define HKEY_ROOT				HKEY_CLASSES_ROOT
+#else 
+#define HKEY_ROOT				((HKEY)0x80000002)
+#endif
+
+//
+// registry keys
+//
+#ifdef WIN32
+static char szNavigatorSection[] = "Software\\Netscape\\Netscape Navigator";
+static char szNavigatorCurVersionSection[] = "Software\\Netscape\\Netscape Navigator\\%s\\Main";
+static char szCurrentVersionKey[] = "CurrentVersion";
+static char szInstallDirKey[] = "Install Directory";
+static char szMapiSection[] = "Software\\Netscape\\Netscape Navigator\\MAPI";
+static char szTempFiles[] = "TempFiles";  
+static char szMapiLog[] = "NSMAPI32.LOG";
+#else 
+//32 bit key strings for trying to read the 32bit registry
+static char szNavigatorSection32[] = "Software\\Netscape\\Netscape Navigator";
+static char szNavigatorCurVersionSection32[] = "Software\\Netscape\\Netscape Navigator\\%s\\Main";
+static char szMapiSection32[] = "Software\\Netscape\\Netscape Navigator\\MAPI";
+
+// ini section and key strings 
+static char szNetscapeINI[] = "nscp.ini";
+static char szNavigatorSection[] = "Netscape Navigator";
+static char szNavigatorCurVersionSection[] = "Netscape Navigator-%s";
+static char szCurrentVersionKey[] = "CurrentVersion";
+static char szInstallDirKey[] = "Install Directory";
+static char szMapiSection[] = "MAPI";
+static char szTempFiles[] = "TempFiles";
+static char szExeName[] = "NAVSTART.EXE";
+static char szMapiLog[] = "NSMAPI16.LOG";
+#endif                                   
+
+//Since REGSAM is just an ACCESS_MASK which is just a DWORD and it's not 
+//declared in win16 we'll make one hear for the purpose of keeping parameters
+//the same even though the access rights don't get used for win16.
+
+typedef DWORD REGSAM;
+
+
+// XP declarations
+
+int 	LOAD_DS Is_16_OR_32_BIT_CommunitorRunning();
+WORD 	LOAD_DS XP_CallProcess(LPCSTR pPath, LPCSTR pCmdLine);
+HKEY LOAD_DS RegOpenParent(LPCSTR pSection, HKEY hRootKey, REGSAM access);
+HKEY LOAD_DS RegCreateParent(LPCSTR pSection, HKEY hMasterKey);
+BOOL LOAD_DS GetConfigInfoStr(LPCSTR pSection, LPCSTR pKey, LPSTR pBuf, int lenBuf, HKEY hMasterKey);
+BOOL LOAD_DS GetConfigInfoNum(LPCSTR pSection, LPCSTR pKey, DWORD* pVal, HKEY hMasterKey);
+BOOL LOAD_DS SetConfigInfoStr(LPCSTR pSection, LPCSTR pKey, LPSTR pStr, HKEY hMasterKey); 
+
+BOOL  LOAD_DS XP_GetInstallDirectory(LPCSTR pcurVersionSection, LPCSTR pInstallDirKey, LPSTR path, UINT nSize, HKEY hKey); 
+BOOL  LOAD_DS XP_GetVersionInfoString(LPCSTR pNavigatorSection, LPCSTR pCurrentVersionKey, LPSTR pcurVersionStr, UINT nSize, HKEY hKey);
+DWORD LOAD_DS XP_GetInstallLocation(LPSTR pPath, UINT nSize);
+BOOL LOAD_DS  XP_CopyFile(LPCSTR lpExistingFile, LPCSTR lpNewFile, BOOL bFailifExist);
+
+#endif    // __XPAPI_H

mozilla/mailnews/mapi/old/public/makefile.win

@@ -0,0 +1,31 @@
+#!nmake
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+DEPTH=..\..\..
+MODULE=mime
+
+EXPORTS =							\
+	nscpmapi.h		\
+    $(NULL)
+
+
+include <$(DEPTH)\config\rules.mak>
+

mozilla/mailnews/mapi/old/public/nscpmapi.h

@@ -0,0 +1,351 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+// This is a header file for the MAPI support within 
+// Communicator. 
+//
+// Written by: Rich Pizzarro (rhp@netscape.com)
+//
+#ifndef _NSCPMAPI
+#define _NSCPMAPI
+
+#ifndef MAPI_OLE	// Because MSFT doesn't do this for us :-(
+#include <mapi.h>     // for MAPI specific types...        
+#endif 
+
+#ifdef WIN16
+typedef unsigned char	UCHAR;
+#endif 
+
+
+#define           MAX_NAME_LEN    256
+#define           MAX_PW_LEN      256
+#define           MAX_MSGINFO_LEN 512
+#define           MAX_CON         4     // Maximum MAPI session supported
+#define           MAX_POINTERS    32
+
+//
+// The MAPI class that will act as the internal mechanism for 
+// Communicator to control multiple MAPI sessions.
+//
+class CMAPIConnection 
+{
+protected:
+  LONG        m_ID;
+  BOOL        m_defaultConnection;  
+  LONG        m_sessionCount;
+  LONG        m_messageIndex;
+  LPVOID      m_cookie;
+  UCHAR       m_messageFindInfo[MAX_MSGINFO_LEN];
+  UCHAR       m_profileName[MAX_NAME_LEN];
+  UCHAR       m_password[MAX_PW_LEN];
+
+  // Methods
+
+public:
+  CMAPIConnection  ( LONG, LPSTR, LPSTR );
+  ~CMAPIConnection ( );
+
+  // ID related methods
+  LONG   GetID( ) { return m_ID; } ;
+
+  // Dealing with the default session...
+  BOOL    IsDefault( ) { return m_defaultConnection; } ;
+  void    SetDefault( BOOL flag ) { m_defaultConnection = flag; } ;
+
+  // For handling multiple sessions on a profile name...
+  LONG    GetSessionCount( ) { return m_sessionCount; } ;
+  void    IncrementSessionCount() { ++m_sessionCount; } ;
+  void    DecrementSessionCount() { --m_sessionCount; } ;
+
+  // Information retrieval stuff...
+  LPSTR   GetProfileName( ) { return (LPSTR) m_profileName; };
+  LPSTR   GetPassword( ) { return (LPSTR) m_password; };
+
+  // Dealing with message information...
+  void    SetMessageIndex( LONG mIndex ) { m_messageIndex = mIndex; } ;
+  LONG    GetMessageIndex( ) { return m_messageIndex; };
+
+  void    SetMessageFindInfo( LPSTR info ) { lstrcpy((LPSTR)m_messageFindInfo, info); } ;
+  LPSTR   GetMessageFindInfo( ) { return (LPSTR) m_messageFindInfo; };
+
+  // For enumerating Messages...
+  void    SetMapiListContext( LPVOID cookie) { m_cookie = cookie; } ;
+  LPVOID  GetMapiListContext( ) { return m_cookie; };
+};
+
+//
+// Defines needed for requests being made with the WM_COPYDATA call...
+//
+typedef enum {
+    NSCP_MAPIStartRequestID = 0,
+    NSCP_MAPILogon,
+    NSCP_MAPILogoff,
+    NSCP_MAPIFree,
+    NSCP_MAPISendMail,
+    NSCP_MAPISendDocuments, 
+    NSCP_MAPIFindNext,
+    NSCP_MAPIReadMail,
+    NSCP_MAPISaveMail,
+    NSCP_MAPIDeleteMail,
+    NSCP_MAPIAddress,
+    NSCP_MAPIDetails,
+    NSCP_MAPIResolveName,
+    NSCP_MAPIEndRequestID       // Note: this is a marker for MAPI IPC requests
+} NSCP_IPC_REQUEST;
+
+//
+// This is to keep track of the pointers allocated in the MAPI DLL
+// and deal with them correctly.
+//
+#define   MAPI_MESSAGE_TYPE     0
+#define   MAPI_RECIPIENT_TYPE   1
+ 
+typedef struct {
+  LPVOID    lpMem;
+  UCHAR     memType;
+} memTrackerType;
+
+//
+// This is the generic message that WM_COPYDATA will send to the
+// Communicator product to allow it to attach to shared memory.
+// NOTE: On Win16, this will simply reference a pointer.
+//
+typedef struct {
+  UCHAR   smemName[64]; // Name of shared memory
+  DWORD   smemSize;     // Size of shared memory
+  LPVOID  lpsmem;       // Will be really used in Win16 only
+} MAPIIPCType;
+
+//
+// These are message specific structures that will be used for 
+// the various MAPI operations.
+//
+typedef struct {
+  ULONG     ulUIParam;
+  FLAGS     flFlags;
+  LHANDLE   lhSession;
+  DWORD     ipcWorked;      // Necessary for IPC check with Communicator
+// LPSTR     strSequence,  // LPSTR lpszProfileName, LPSTR lpszPassword
+// This is here to document the fact there will be a string sequence at 
+// this location
+} MAPILogonType;
+
+typedef struct {
+  LHANDLE   lhSession;
+  ULONG     ulUIParam;
+  FLAGS     flFlags;
+  DWORD     ipcWorked;      // Necessary for IPC check with Communicator
+} MAPILogoffType;
+
+typedef struct {
+  LHANDLE   lhSession;
+  ULONG     ulUIParam;
+  FLAGS     flFlags;
+  DWORD     ipcWorked;      // Necessary for IPC check with Communicator
+  // The following is the "FLAT" representation of the (lpMapiMessage lpMessage) 
+  // argument of this structure 
+  FLAGS     MSG_flFlags;          // unread,return receipt                  
+  ULONG     MSG_nRecipCount;      // Number of recipients                   
+  ULONG     MSG_nFileCount;       // # of file attachments                  
+  ULONG     MSG_ORIG_ulRecipClass; //  Recipient class - MAPI_TO, MAPI_CC, MAPI_BCC, MAPI_ORIG
+  BYTE      dataBuf[1];           // For easy referencing
+  //
+  // This is where it gets CONFUSING...the following buffer of memory is a
+  // contiguous chunk of memory for various strings that are part of this
+  // multilevel structure. For any of the following structure, any numbers
+  // are represented by strings that will have to be converted back to numeric
+  // values with atoi() calls.
+
+  // String 0: LPSTR lpszSubject;            // Message Subject
+  // String 1: LPSTR lpszNoteText FILE NAME; // Message Text will be
+  //           stored into a temp file and this will be the pointer to that file.
+  // String 2: LPSTR lpszDateReceived;       // in YYYY/MM/DD HH:MM format
+  // String 3: LPSTR lpszConversationID;     // conversation thread ID
+  //
+  // The following are for the originator of the message. Only ONE of these.
+  //
+  // String 4: LPSTR lpszName;             // Originator name                           
+  // String 5: LPSTR lpszAddress;          // Originator address (optional)             
+  //
+  // The following strings are for the recipients for this message. There are
+  // MSG_nRecipCount of these in a row:
+  //
+  // for (i=0; i<MSG_nRecipCount; i++)
+  //      String x: LPSTR lpszRecipClass (ULONG) // Recipient class - MAPI_TO, MAPI_CC, MAPI_BCC, MAPI_ORIG        
+  //      String x: LPSTR lpszName;     // Recipient N name                           
+  //      String x: LPSTR lpszAddress;  // Recipient N address (optional)             
+  //
+  // Now, finally, add the attachments for this beast. There are MSG_nFileCount
+  // attachments so it would look like the following:
+  //
+  // for (i=0; i<MSG_nFileCount; i++)
+  //
+  //      String x: LPSTR lpszPathName // Fully qualified path of the attached file. 
+  //                                   // This path should include the disk drive letter and directory name.
+  //      String x: LPSTR lpszFileName // The display name for the attached file
+  //
+} MAPISendMailType;
+
+typedef struct {
+    ULONG     ulUIParam;
+    ULONG     nFileCount;
+    DWORD     ipcWorked;      // Necessary for IPC check with Communicator
+    BYTE      dataBuf[1];     // For easy referencing
+    //
+    // The sequence of strings to follow are groups of PathName/FileName couples.
+    // The strings will be parsed in MAPI[32].DLL and then put into this format:
+    //
+    // for (i=0; i<nFileCount; i++)
+    //
+    //      String x: LPSTR lpszPathName // Fully qualified path of the attached file. 
+    //                                   // This path should include the disk drive letter and directory name.
+    //      String x: LPSTR lpszFileName // The display name for the attached file
+} MAPISendDocumentsType;
+
+typedef struct {
+  LHANDLE     lhSession;
+  ULONG       ulUIParam;
+  FLAGS       flFlags;
+  DWORD       ipcWorked;      // Necessary for IPC check with Communicator
+  UCHAR       lpszSeedMessageID[MAX_MSGINFO_LEN];
+  UCHAR       lpszMessageID[MAX_MSGINFO_LEN];
+} MAPIFindNextType;
+
+typedef struct {
+  LHANDLE     lhSession;
+  ULONG       ulUIParam;
+  DWORD       ipcWorked;      // Necessary for IPC check with Communicator
+  UCHAR       lpszMessageID[MAX_MSGINFO_LEN];
+} MAPIDeleteMailType;
+
+typedef struct {
+  LHANDLE     lhSession;
+  ULONG       ulUIParam;
+  FLAGS       flFlags;
+  DWORD       ipcWorked;      // Necessary for IPC check with Communicator
+  UCHAR       lpszName[MAX_NAME_LEN];
+  // These are returned by Communicator
+  UCHAR       lpszABookID[MAX_NAME_LEN];         
+  UCHAR       lpszABookName[MAX_NAME_LEN];            
+  UCHAR       lpszABookAddress[MAX_NAME_LEN];         
+} MAPIResolveNameType;
+
+typedef struct {
+  LHANDLE     lhSession;
+  ULONG       ulUIParam;
+  FLAGS       flFlags;
+  DWORD       ipcWorked;      // Necessary for IPC check with Communicator
+  UCHAR       lpszABookID[MAX_NAME_LEN];
+} MAPIDetailsType;
+
+typedef struct {
+  LHANDLE     lhSession;
+  ULONG       ulUIParam;
+  FLAGS       flFlags;
+  DWORD       ipcWorked;      // Necessary for IPC check with Communicator
+  UCHAR       lpszMessageID[MAX_MSGINFO_LEN];
+  //
+  // The following is the "FLAT" representation of the (lpMapiMessage lpMessage) 
+  // argument of this structure 
+  //
+  FLAGS     MSG_flFlags;          // unread, return or receipt                  
+  ULONG     MSG_nRecipCount;      // Number of recipients                   
+  ULONG     MSG_nFileCount;       // # of file attachments                  
+  ULONG     MSG_ORIG_ulRecipClass; //  Recipient class - MAPI_TO, MAPI_CC, MAPI_BCC, MAPI_ORIG
+  //
+  // Output parameter for blob of information that will live on disk. 
+  //
+  UCHAR       lpszBlob[MAX_MSGINFO_LEN];    // file name on disk
+  //
+  // The format of this blob of information will be:
+  //
+  // String 0: LPSTR lpszSubject;            // Message Subject
+  // String 1: LPSTR lpszNoteText FILE NAME; // Message Text will be
+  //           stored into a temp file and this will be the pointer to that file.
+  // String 2: LPSTR lpszDateReceived;       // in YYYY/MM/DD HH:MM format
+  // String 3: LPSTR lpszConversationID;     // conversation thread ID
+  //
+  // The following are for the originator of the message. Only ONE of these.
+  //
+  // String 4: LPSTR lpszName;             // Originator name                           
+  // String 5: LPSTR lpszAddress;          // Originator address (optional)             
+  //
+  // The following strings are for the recipients for this message. There are
+  // MSG_nRecipCount of these in a row:
+  //
+  // for (i=0; i<MSG_nRecipCount; i++)
+  //      String x: LPSTR lpszName;             // Recipient N name                           
+  //      String x: LPSTR lpszAddress;          // Recipient N address (optional)             
+  //      String x: LPSTR lpszRecipClass        // recipient class - sprintf of ULONG
+  //
+  // Now, finally, add the attachments for this beast. There are MSG_nFileCount
+  // attachments so it would look like the following:
+  //
+  // for (i=0; i<MSG_nFileCount; i++)
+  //
+  //      String x: LPSTR lpszPathName // Fully qualified path of the attached file. 
+  //                                   // This path should include the disk drive letter and directory name.
+  //      String x: LPSTR lpszFileName // The display name for the attached file
+  //
+} MAPIReadMailType;
+
+typedef struct {
+  LHANDLE   lhSession;
+  ULONG     ulUIParam;
+  FLAGS     flFlags;
+  UCHAR     lpszCaption[MAX_MSGINFO_LEN];
+  DWORD     ipcWorked;      // Necessary for IPC check with Communicator
+  // The following is the "FLAT" representation of the (lpMapiRecipDesc lpRecips) 
+  // argument of this structure 
+  ULONG     nRecips;              // number of recips to start with...
+  ULONG     nNewRecips;           // number of recips returned...
+  UCHAR     lpszBlob[MAX_MSGINFO_LEN];    // file name for blob of information 
+                                          // that will live on disk. 
+  BYTE      dataBuf[1];           // For easy referencing
+  //
+  // The following contiguous chunk of memory is the buffer that holds 
+  // the recipients to load into the address picker...
+  //
+  // for (i=0; i<MSG_nRecipCount; i++)
+  //      String x: LPSTR lpszRecipClass (ULONG) // Recipient class - MAPI_TO, MAPI_CC, MAPI_BCC, MAPI_ORIG        
+  //      String x: LPSTR lpszName;     // Recipient N name                           
+  //      String x: LPSTR lpszAddress;  // Recipient N address (optional)             
+  //
+} MAPIAddressType;
+
+#endif    // _NSCPMAPI

mozilla/mailnews/mapi/old/tests/makefile.win

@@ -0,0 +1,27 @@
+#!nmake
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+DEPTH=..\..\..
+
+
+DIRS=mapitest
+
+include <$(DEPTH)\config\rules.mak>

mozilla/mailnews/mapi/old/tests/mapitest/main.cpp

@@ -0,0 +1,239 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+#include <windows.h>
+#include <windowsx.h>
+#include <string.h>
+#include <stdlib.h>
+#ifndef MAPI_OLE	// Because MSFT doesn't do this for us :-(
+#include <mapi.h>
+#endif
+
+#include "port.h"
+#include "resource.h"
+
+#ifndef WM_PAINTICON
+#define WM_PAINTICON              0x26
+#endif // WM_PAINTICON
+
+/* 
+ * Forward Declarations...
+ */
+BOOL      InitInstance(HINSTANCE hInstance, int nCmdShow);
+BOOL CALLBACK LOADDS MyDlgProc(HWND hWnd, UINT wMsg, WPARAM wParam, LPARAM lParam);
+extern void ProcessCommand(HWND hWnd, int id, HWND hCtl, UINT codeNotify);
+BOOL      OpenMAPI(void);
+void      CloseMAPI(void);
+
+/*  
+ * Global variables
+ */
+HINSTANCE   hInst;
+HWND      hWnd;    
+
+#ifdef WIN16
+HICON	hIconApp;
+#endif
+
+char NEAR szAppName[] = "Netscape QA Helper";
+char NEAR szShortAppName[] = "QAHelper";
+char szClassName[] = "Netscape_QAHelper_Class_Name";
+
+void
+AppCleanup(void)
+{
+  extern void    DoMAPILogoff(HWND hWnd);
+  static BOOL isDone = FALSE;
+
+  if (isDone)
+    return;
+
+  extern LHANDLE    mapiSession;
+
+  if (mapiSession != 0)
+  {
+    DoMAPILogoff(hWnd);
+  }
+
+  CloseMAPI();
+  isDone = TRUE;
+}
+
+BOOL 
+InitInstance(HINSTANCE hInstance, int nCmdShow)
+{
+  /* Create a main window for this application instance.  */
+  hWnd = CreateDialog((HINSTANCE) hInstance, 
+            MAKEINTRESOURCE(ID_DIALOG),
+            (HWND) NULL, (DLGPROC) MyDlgProc);
+  
+  if (!hWnd)
+    return FALSE;
+  else
+    return TRUE;
+}
+
+BOOL InitApp(void)
+{
+#ifndef WIN16
+  WNDCLASS wc;
+  wc.style         = 0; 
+  wc.lpfnWndProc   = DefDlgProc; 
+  wc.cbClsExtra    = 0; 
+  wc.cbWndExtra    = DLGWINDOWEXTRA; 
+  wc.hInstance     = hInst; 
+  wc.hIcon         = LoadIcon(hInst, MAKEINTRESOURCE(ID_ICON_APP)); 
+  wc.hCursor       = LoadCursor(0, IDC_ARROW); 
+  wc.hbrBackground = (HBRUSH)(COLOR_BTNFACE + 1);
+  wc.lpszMenuName  = NULL; 
+  wc.lpszClassName = szClassName;
+  
+  if(!RegisterClass(&wc))
+    return FALSE;
+
+#else                
+  hIconApp = LoadIcon(hInst, MAKEINTRESOURCE(ID_ICON_APP));
+#endif
+  
+  return TRUE;
+} // end InitApp
+
+// Win Main 
+int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow)
+{
+  MSG     msg;
+  
+  hInst = hInstance;
+  
+  if (!InitApp()) 
+  { 
+    return FALSE;
+  }
+  
+  if (!InitInstance(hInstance, nCmdShow)) 
+  {    
+    return FALSE;
+  }
+
+  if (!OpenMAPI()) 
+  {    
+    return FALSE;
+  }
+
+  ShowWindow(hWnd, SW_SHOW);
+  
+  // Start the application
+  while ((GetMessage(&msg, (HWND) NULL, (UINT) NULL, (UINT) NULL)))
+  {
+    if(IsDialogMessage(hWnd, &msg))
+      continue;
+    
+    TranslateMessage(&msg);
+    DispatchMessage(&msg);
+  }
+
+  return(msg.wParam);
+}
+
+BOOL CALLBACK LOADDS 
+MyDlgProc(HWND hWndMain, UINT wMsg, WPARAM wParam, LPARAM lParam) 
+{
+  switch (wMsg) 
+  {
+  case WM_INITDIALOG: 
+    {
+      hWnd = hWndMain;
+	    SetDlgItemText(hWnd, ID_EDIT_ROW, "0");
+    }
+    break;
+    
+  case WM_CLOSE:
+    {
+      DestroyWindow(hWnd);
+      break;
+    }
+
+  case WM_DESTROY:
+    {
+      AppCleanup();
+
+#ifndef WIN16
+      UnregisterClass(szClassName, hInst);
+#else              
+      // Destroy the 16 bit windows icon
+      if(hIconApp != 0)
+        DestroyIcon(hIconApp);
+#endif
+      
+      PostQuitMessage(0);
+      break;
+    }
+  case WM_COMMAND:
+    HANDLE_WM_COMMAND(hWnd, wParam, lParam, ProcessCommand);
+    break;
+    
+  case WM_QUERYDRAGICON:     
+#ifdef WIN16
+    return (BOOL)hIconApp;
+#endif
+    
+  case WM_PAINTICON:
+#ifdef WIN16    
+    SetClassWord(hWnd, GCW_HICON, 0);
+    
+    // fall trough
+  case WM_PAINT: 
+    {
+      if(!IsIconic(hWnd))
+        return FALSE;
+      PAINTSTRUCT ps;
+      HDC hDC = BeginPaint(hWnd, &ps);
+      SetMapMode(hDC, MM_TEXT);
+      DrawIcon(hDC, 2, 2, hIconApp);
+      EndPaint(hWnd, &ps);
+      break;
+    } 
+#endif //WIN16
+    break;    // RICHIE - if this is not here NT 3.51 Pukes!!!!  
+
+  default:
+    return FALSE;
+  }
+  
+  //~~av  return (DefWindowProc(hWnd, wMsg, wParam, lParam));
+  return TRUE;
+}

mozilla/mailnews/mapi/old/tests/mapitest/makefile.win

@@ -0,0 +1,240 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on mapitest.dsp
+!IF "$(CFG)" == ""
+CFG=mapitest - Win32 Debug
+!MESSAGE No configuration specified. Defaulting to mapitest - Win32 Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "mapitest - Win32 Release" && "$(CFG)" != "mapitest - Win32 Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "mapitest.mak" CFG="mapitest - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "mapitest - Win32 Release" (based on "Win32 (x86) Application")
+!MESSAGE "mapitest - Win32 Debug" (based on "Win32 (x86) Application")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+!IF  "$(CFG)" == "mapitest - Win32 Release"
+
+OUTDIR=.\Release
+INTDIR=.\Release
+# Begin Custom Macros
+OutDir=.\Release
+# End Custom Macros
+
+ALL : "$(OUTDIR)\mapitest.exe"
+
+export :
+libs :
+install : 
+
+clobber_all : clobber
+
+clobber:
+	-@erase "$(INTDIR)\main.obj"
+	-@erase "$(INTDIR)\mapimail.obj"
+	-@erase "$(INTDIR)\mapiproc.obj"
+	-@erase "$(INTDIR)\mtest32.res"
+	-@erase "$(INTDIR)\readmail.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(OUTDIR)\mapitest.exe"
+	-@erase "$(OUTDIR)\mapitest.pch"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /Fp"$(INTDIR)\mapitest.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+MTL=midl.exe
+MTL_PROJ=/nologo /D "NDEBUG" /mktyplib203 /win32 
+RSC=rc.exe
+RSC_PROJ=/l 0x409 /fo"$(INTDIR)\mtest32.res" /d "NDEBUG" 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\mapitest.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /incremental:no /pdb:"$(OUTDIR)\mapitest.pdb" /machine:I386 /out:"$(OUTDIR)\mapitest.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\main.obj" \
+	"$(INTDIR)\mapimail.obj" \
+	"$(INTDIR)\mapiproc.obj" \
+	"$(INTDIR)\readmail.obj" \
+	"$(INTDIR)\mtest32.res"
+
+"$(OUTDIR)\mapitest.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+
+!ELSEIF  "$(CFG)" == "mapitest - Win32 Debug"
+
+OUTDIR=.\Debug
+INTDIR=.\Debug
+# Begin Custom Macros
+OutDir=.\Debug
+# End Custom Macros
+
+ALL : "$(OUTDIR)\mapitest.exe"
+
+export :
+libs :
+install : 
+
+clobber_all : clobber
+
+clobber :
+	-@erase "$(INTDIR)\main.obj"
+	-@erase "$(INTDIR)\mapimail.obj"
+	-@erase "$(INTDIR)\mapiproc.obj"
+	-@erase "$(INTDIR)\mtest32.res"
+	-@erase "$(INTDIR)\readmail.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\vc60.pdb"
+	-@erase "$(OUTDIR)\mapitest.exe"
+	-@erase "$(OUTDIR)\mapitest.ilk"
+	-@erase "$(OUTDIR)\mapitest.pdb"
+	-@erase "$(OUTDIR)\mapitest.pch"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /MLd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /Fp"$(INTDIR)\mapitest.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+MTL=midl.exe
+MTL_PROJ=/nologo /D "_DEBUG" /mktyplib203 /win32 
+RSC=rc.exe
+RSC_PROJ=/l 0x409 /fo"$(INTDIR)\mtest32.res" /d "_DEBUG" 
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\mapitest.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /incremental:yes /pdb:"$(OUTDIR)\mapitest.pdb" /debug /machine:I386 /out:"$(OUTDIR)\mapitest.exe" /pdbtype:sept 
+LINK32_OBJS= \
+	"$(INTDIR)\main.obj" \
+	"$(INTDIR)\mapimail.obj" \
+	"$(INTDIR)\mapiproc.obj" \
+	"$(INTDIR)\readmail.obj" \
+	"$(INTDIR)\mtest32.res"
+
+"$(OUTDIR)\mapitest.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+
+!ENDIF 
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("mapitest.dep")
+!INCLUDE "mapitest.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "mapitest.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "mapitest - Win32 Release" || "$(CFG)" == "mapitest - Win32 Debug"
+SOURCE=.\main.cpp
+
+"$(INTDIR)\main.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\mapimail.cpp
+
+"$(INTDIR)\mapimail.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\mapiproc.cpp
+
+"$(INTDIR)\mapiproc.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\mtest32.rc
+
+"$(INTDIR)\mtest32.res" : $(SOURCE) "$(INTDIR)"
+	$(RSC) $(RSC_PROJ) $(SOURCE)
+
+
+SOURCE=.\readmail.cpp
+
+"$(INTDIR)\readmail.obj" : $(SOURCE) "$(INTDIR)"
+
+
+
+!ENDIF 
+

mozilla/mailnews/mapi/old/tests/mapitest/mapimail.cpp

@@ -0,0 +1,772 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+#include <windows.h>
+#include <windowsx.h>   
+#include <string.h>
+#include <mapi.h>         
+#include <stdlib.h>
+
+#include "port.h"
+#include "resource.h"
+
+//
+// Variables...
+// 
+extern HINSTANCE   m_hInstMapi;
+extern LHANDLE     mapiSession;
+
+// 
+// Forward declarations...
+//
+void          DoMAPIFreeBuffer(HWND hWnd, LPVOID buf, BOOL alert);
+extern void   ShowMessage(HWND hWnd, LPSTR msg);
+void          DoMAPISendMail(HWND hWnd);
+void          DoMAPISendDocuments(HWND hWnd);
+void          DoMAPISaveMail(HWND hWnd);
+void          DoMAPIAddress(HWND hWnd);
+extern void   SetFooter(LPSTR msg);
+extern LPSTR  GetMAPIError(LONG errorCode);
+
+void 
+ProcessMailCommand(HWND hWnd, int id, HWND hCtl, UINT codeNotify) 
+{ 
+  switch (id) 
+  {
+  case IDCANCEL:
+    EndDialog(hWnd, 0);
+    break;
+
+  case ID_BUTTON_MAPISENDMAIL:
+    DoMAPISendMail(hWnd);
+    break;
+
+  case ID_BUTTON_MAPISENDDOCUMENTS:
+    DoMAPISendDocuments(hWnd);
+    break;
+
+  case ID_BUTTON_MAPISAVEMAIL:
+    DoMAPISaveMail(hWnd);
+    break;
+
+  case ID_BUTTON_MAPIADDRESS:
+    DoMAPIAddress(hWnd);
+    break;
+
+  default:
+    break;
+  }
+}
+
+BOOL CALLBACK LOADDS 
+MailDlgProc(HWND hWndMain, UINT wMsg, WPARAM wParam, LPARAM lParam) 
+{
+  switch (wMsg) 
+  {
+  case WM_INITDIALOG: 
+    break;
+
+  case WM_COMMAND:
+    HANDLE_WM_COMMAND(hWndMain, wParam, lParam, ProcessMailCommand);
+    break;
+
+  default:
+    return FALSE;
+  }
+  
+  return TRUE;
+}
+
+static LPSTR lpszDelimChar = ";";
+
+void
+TackItOn(LPSTR fileBuf, LPSTR nameBuf, LPSTR addOn)
+{
+  if (addOn[0] != '\0')
+  {
+    lstrcat(fileBuf, addOn);
+    lstrcat(fileBuf, lpszDelimChar);
+
+    lstrcat(nameBuf, "NAMEOF.FILE");
+    lstrcat(nameBuf, lpszDelimChar);
+  }
+}
+
+void
+DoMAPISendDocuments(HWND hWnd)
+{
+  ULONG (FAR PASCAL *lpfnMAPISendDocuments) (ULONG ulUIParam, 
+          LPTSTR lpszDelimChar, LPTSTR lpszFullPaths, 
+          LPTSTR lpszFileNames, ULONG ulReserved);
+
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPISendDocuments = GetProcAddress(m_hInstMapi, "MAPISENDDOCUMENTS"); 
+#else
+  (FARPROC&) lpfnMAPISendDocuments = GetProcAddress(m_hInstMapi, "MAPISendDocuments"); 
+#endif
+  
+  if (!lpfnMAPISendDocuments)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }
+
+  char  msg[1024];
+  char  tempFileName[_MAX_PATH] = "";
+  char  lpszFullPaths[(_MAX_PATH + 1) * 4] = "";
+  char  lpszFileNames[(_MAX_PATH + 1) * 4] = "";
+
+  // Now get the names of the files to attach...
+  GetDlgItemText(hWnd, ID_EDIT_ATTACH1, tempFileName, sizeof(tempFileName));
+  TackItOn(lpszFullPaths, lpszFileNames, tempFileName); 
+
+  GetDlgItemText(hWnd, ID_EDIT_ATTACH2, tempFileName, sizeof(tempFileName));
+  TackItOn(lpszFullPaths, lpszFileNames, tempFileName); 
+
+  GetDlgItemText(hWnd, ID_EDIT_ATTACH3, tempFileName, sizeof(tempFileName));
+  TackItOn(lpszFullPaths, lpszFileNames, tempFileName); 
+
+  GetDlgItemText(hWnd, ID_EDIT_ATTACH4, tempFileName, sizeof(tempFileName));
+  TackItOn(lpszFullPaths, lpszFileNames, tempFileName); 
+
+  LONG  rc = (*lpfnMAPISendDocuments)
+        ( (ULONG) hWnd,        
+          lpszDelimChar, 
+          lpszFullPaths, 
+          lpszFileNames, 
+          0);
+
+  if (rc == SUCCESS_SUCCESS)
+  {
+    ShowMessage(hWnd, "Success with MAPISendDocuments");
+    SetFooter("MAPISendDocuments success");
+  }
+  else
+  {
+    wsprintf(msg, "FAILURE: Return code %d from MAPISendDocuments\nError=[%s]", 
+                      rc, GetMAPIError(rc));
+    ShowMessage(hWnd, msg);
+    SetFooter("MAPISendDocuments failed");
+  }
+}
+
+void
+FreeMAPIFile(lpMapiFileDesc pv)
+{
+  if (!pv)
+    return;
+
+  if (pv->lpszPathName != NULL)   
+    free(pv->lpszPathName);
+
+  if (pv->lpszFileName != NULL)   
+    free(pv->lpszFileName);
+}
+
+void
+FreeMAPIRecipient(lpMapiRecipDesc pv)
+{
+  if (!pv)
+    return;
+
+  if (pv->lpszName != NULL)   
+    free(pv->lpszName);
+
+  if (pv->lpszAddress != NULL)
+    free(pv->lpszAddress);
+
+  if (pv->lpEntryID != NULL)
+    free(pv->lpEntryID);  
+}
+
+void
+FreeMAPIMessage(lpMapiMessage pv)
+{
+  ULONG i;
+
+  if (!pv)
+    return;
+
+  if (pv->lpszSubject != NULL)
+    free(pv->lpszSubject);
+
+  if (pv->lpszNoteText)
+      free(pv->lpszNoteText);
+  
+  if (pv->lpszMessageType)
+    free(pv->lpszMessageType);
+  
+  if (pv->lpszDateReceived)
+    free(pv->lpszDateReceived);
+  
+  if (pv->lpszConversationID)
+    free(pv->lpszConversationID);
+  
+  if (pv->lpOriginator)
+    FreeMAPIRecipient(pv->lpOriginator);
+  
+  for (i=0; i<pv->nRecipCount; i++)
+  {
+    if (&(pv->lpRecips[i]) != NULL)
+    {
+      FreeMAPIRecipient(&(pv->lpRecips[i]));
+    }
+  }
+
+  if (pv->lpRecips != NULL)
+  {
+    free(pv->lpRecips);
+  }
+
+  for (i=0; i<pv->nFileCount; i++)
+  {
+    if (&(pv->lpFiles[i]) != NULL)
+    {
+      FreeMAPIFile(&(pv->lpFiles[i]));
+    }
+  }
+
+  if (pv->lpFiles != NULL)
+  {
+    free(pv->lpFiles);
+  }
+  
+  free(pv);
+  pv = NULL;
+}
+
+void
+DoMAPISendMail(HWND hWnd)
+{
+  ULONG (FAR PASCAL *lpfnMAPISendMail) (LHANDLE lhSession, ULONG ulUIParam, 
+                  lpMapiMessage lpMessage, FLAGS flFlags, ULONG ulReserved);
+
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPISendMail = GetProcAddress(m_hInstMapi, "MAPISENDMAIL"); 
+#else
+  (FARPROC&) lpfnMAPISendMail = GetProcAddress(m_hInstMapi, "MAPISendMail"); 
+#endif
+  
+  if (!lpfnMAPISendMail)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }          
+
+  FLAGS   flFlags = 0;
+  char    msg[512];
+  char    file1[_MAX_PATH] = "";
+  char    file2[_MAX_PATH] = "";
+  char    file3[_MAX_PATH] = "";
+  char    file4[_MAX_PATH] = "";
+  char    toAddr[128];
+  char    ccAddr[128];
+  char    bccAddr[128];
+  char    subject[128];
+  char    noteText[4096];
+  char    dateReceived[128] = "N/A";
+  char    threadID[128] = "N/A";;
+  char    origName[128] = "N/A";;
+  char    origAddress[128] = "N/A";;
+
+  GetDlgItemText(hWnd, ID_EDIT_TOADDRESS, toAddr, sizeof(toAddr));
+  GetDlgItemText(hWnd, ID_EDIT_CCADDRESS, ccAddr, sizeof(ccAddr));
+  GetDlgItemText(hWnd, ID_EDIT_BCCADDRESS, bccAddr, sizeof(bccAddr));
+  GetDlgItemText(hWnd, ID_EDIT_SUBJECT, subject, sizeof(subject));
+  GetDlgItemText(hWnd, ID_EDIT_NOTETEXT, noteText, sizeof(noteText));
+
+  // Do the one flag we support for this call...
+  if (BST_CHECKED == Button_GetCheck(GetDlgItem(hWnd, ID_CHECK_SHOWDIALOG)))
+  {
+    flFlags |= MAPI_DIALOG;
+  }
+
+  // Build the message to send off...
+  lpMapiMessage  msgPtr = (MapiMessage *)malloc(sizeof(MapiMessage));
+  if (msgPtr == NULL)
+  {
+    return;
+  }
+  
+  memset(msgPtr, 0, sizeof(MapiMessage)); 
+
+  //
+  // At this point, we need to populate the structure of information
+  // we are passing in via the *lppMessage
+  //
+
+  // Set all of the general information first!
+  msgPtr->lpszSubject = strdup(subject);
+  msgPtr->lpszNoteText = strdup(noteText);
+  msgPtr->lpszDateReceived = strdup(dateReceived);
+  msgPtr->lpszConversationID = strdup(threadID);
+  msgPtr->flFlags = flFlags;
+
+  // Now deal with the recipients of this message
+  DWORD       realRecips = 0;
+  if (toAddr[0] != '\0')    ++realRecips;
+  if (ccAddr[0] != '\0')    ++realRecips;
+  if (bccAddr[0] != '\0')   ++realRecips;
+
+  msgPtr->lpRecips = (lpMapiRecipDesc) malloc((size_t) (sizeof(MapiRecipDesc) * realRecips));
+  if (!msgPtr->lpRecips)
+  {
+    FreeMAPIMessage(msgPtr);
+    return;
+  }
+
+  msgPtr->nRecipCount = realRecips;
+  memset(msgPtr->lpRecips, 0, (size_t) (sizeof(MapiRecipDesc) * msgPtr->nRecipCount));
+
+  DWORD       rCount = 0;
+  if (toAddr[0] != '\0')
+  {
+    msgPtr->lpRecips[rCount].lpszName = strdup(toAddr);
+    msgPtr->lpRecips[rCount].lpszAddress = strdup(toAddr);
+    msgPtr->lpRecips[rCount].ulRecipClass = MAPI_TO;
+    rCount++;
+  }
+
+  if (ccAddr[0] != '\0')
+  {
+    msgPtr->lpRecips[rCount].lpszName = strdup(ccAddr);
+    msgPtr->lpRecips[rCount].lpszAddress = strdup(ccAddr);
+    msgPtr->lpRecips[rCount].ulRecipClass = MAPI_CC;    
+    rCount++;
+  }
+
+  if (bccAddr[0] != '\0')
+  {
+    msgPtr->lpRecips[rCount].lpszName = strdup(bccAddr);
+    msgPtr->lpRecips[rCount].lpszAddress = strdup(bccAddr);
+    msgPtr->lpRecips[rCount].ulRecipClass = MAPI_BCC;
+    rCount++;
+  }
+
+  // Now get the names of the files to attach...
+  GetDlgItemText(hWnd, ID_EDIT_ATTACH1, file1, sizeof(file1));
+  GetDlgItemText(hWnd, ID_EDIT_ATTACH2, file2, sizeof(file2));
+  GetDlgItemText(hWnd, ID_EDIT_ATTACH3, file3, sizeof(file3));
+  GetDlgItemText(hWnd, ID_EDIT_ATTACH4, file4, sizeof(file4));
+
+  DWORD       realFiles = 0;
+  if (file1[0] != '\0')    ++realFiles;
+  if (file2[0] != '\0')    ++realFiles;
+  if (file3[0] != '\0')    ++realFiles;
+  if (file4[0] != '\0')    ++realFiles;
+
+  // Now deal with the list of attachments! Since the nFileCount should be set
+  // correctly, this loop will automagically be correct
+  //
+  msgPtr->nFileCount = realFiles;
+  if (realFiles > 0)
+  {
+    msgPtr->lpFiles = (lpMapiFileDesc) malloc((size_t) (sizeof(MapiFileDesc) * realFiles));
+    if (!msgPtr->lpFiles)
+    {
+      FreeMAPIMessage(msgPtr);
+      return;
+    }
+
+    memset(msgPtr->lpFiles, 0, (size_t) (sizeof(MapiFileDesc) * msgPtr->nFileCount));
+  }
+
+  rCount = 0;
+  if (file1[0] != '\0')
+  {
+    msgPtr->lpFiles[rCount].lpszPathName = strdup((LPSTR)file1);
+    msgPtr->lpFiles[rCount].lpszFileName = strdup((LPSTR)file1);
+    ++rCount;
+  }
+
+  if (file2[0] != '\0')
+  {
+    msgPtr->lpFiles[rCount].lpszPathName = strdup((LPSTR)file2);
+    msgPtr->lpFiles[rCount].lpszFileName = strdup((LPSTR)file2);
+    ++rCount;
+  }
+
+  if (file3[0] != '\0')
+  {
+    msgPtr->lpFiles[rCount].lpszPathName = strdup((LPSTR)file3);
+    msgPtr->lpFiles[rCount].lpszFileName = strdup((LPSTR)file3);
+    ++rCount;
+  }
+
+  if (file4[0] != '\0')
+  {
+    msgPtr->lpFiles[rCount].lpszPathName = strdup((LPSTR)file4);
+    msgPtr->lpFiles[rCount].lpszFileName = strdup((LPSTR)file4);
+    ++rCount;
+  }
+
+  // Finally, make the call...
+  LONG  rc = (*lpfnMAPISendMail)
+           (mapiSession, 
+           (ULONG) hWnd, 
+           msgPtr, 
+           flFlags, 
+           0);
+
+  if (rc == SUCCESS_SUCCESS)
+  {
+    ShowMessage(hWnd, "Success with MAPISendMail");
+    SetFooter("MAPISendMail success");
+  }
+  else
+  {
+    wsprintf(msg, "FAILURE: Return code %d from MAPISendMail\nError=[%s]", 
+                      rc, GetMAPIError(rc));
+    ShowMessage(hWnd, msg);
+    SetFooter("MAPISendMail failed");
+  }
+
+  // Now cleanup and move on...
+  FreeMAPIMessage(msgPtr);
+}
+
+void
+DoMAPISaveMail(HWND hWnd)
+{
+  ULONG (FAR PASCAL *lpfnMAPISaveMail) (LHANDLE lhSession, ULONG ulUIParam, 
+                  lpMapiMessage lpMessage, FLAGS flFlags, ULONG ulReserved,
+                  LPTSTR lpszMessageID);
+
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPISaveMail = GetProcAddress(m_hInstMapi, "MAPISAVEMAIL"); 
+#else
+  (FARPROC&) lpfnMAPISaveMail = GetProcAddress(m_hInstMapi, "MAPISaveMail"); 
+#endif
+  
+  if (!lpfnMAPISaveMail)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }          
+
+  FLAGS   flFlags = 0;
+  char    msg[512];
+  char    file1[_MAX_PATH] = "";
+  char    file2[_MAX_PATH] = "";
+  char    file3[_MAX_PATH] = "";
+  char    file4[_MAX_PATH] = "";
+  char    toAddr[128];
+  char    ccAddr[128];
+  char    bccAddr[128];
+  char    subject[128];
+  char    noteText[4096];
+  char    dateReceived[128] = "N/A";
+  char    threadID[128] = "N/A";;
+  char    origName[128] = "N/A";;
+  char    origAddress[128] = "N/A";;
+
+  GetDlgItemText(hWnd, ID_EDIT_TOADDRESS, toAddr, sizeof(toAddr));
+  GetDlgItemText(hWnd, ID_EDIT_CCADDRESS, ccAddr, sizeof(ccAddr));
+  GetDlgItemText(hWnd, ID_EDIT_BCCADDRESS, bccAddr, sizeof(bccAddr));
+  GetDlgItemText(hWnd, ID_EDIT_SUBJECT, subject, sizeof(subject));
+  GetDlgItemText(hWnd, ID_EDIT_NOTETEXT, noteText, sizeof(noteText));
+
+  // Build the message to send off...
+  lpMapiMessage  msgPtr = (MapiMessage *)malloc(sizeof(MapiMessage));
+  if (msgPtr == NULL)
+  {
+    return;
+  }
+  
+  memset(msgPtr, 0, sizeof(MapiMessage)); 
+
+  //
+  // At this point, we need to populate the structure of information
+  // we are passing in via the *lppMessage
+  //
+
+  // Set all of the general information first!
+  msgPtr->lpszSubject = strdup(subject);
+  msgPtr->lpszNoteText = strdup(noteText);
+  msgPtr->lpszDateReceived = strdup(dateReceived);
+  msgPtr->lpszConversationID = strdup(threadID);
+  msgPtr->flFlags = flFlags;
+
+  // Now deal with the recipients of this message
+  DWORD       realRecips = 0;
+  if (toAddr[0] != '\0')    ++realRecips;
+  if (ccAddr[0] != '\0')    ++realRecips;
+  if (bccAddr[0] != '\0')   ++realRecips;
+
+  msgPtr->lpRecips = (lpMapiRecipDesc) malloc((size_t) (sizeof(MapiRecipDesc) * realRecips));
+  if (!msgPtr->lpRecips)
+  {
+    FreeMAPIMessage(msgPtr);
+    return;
+  }
+
+  msgPtr->nRecipCount = realRecips;
+  memset(msgPtr->lpRecips, 0, (size_t) (sizeof(MapiRecipDesc) * msgPtr->nRecipCount));
+
+  DWORD       rCount = 0;
+  if (toAddr[0] != '\0')
+  {
+    msgPtr->lpRecips[rCount].lpszName = strdup(toAddr);
+    msgPtr->lpRecips[rCount].lpszAddress = strdup(toAddr);
+    msgPtr->lpRecips[rCount].ulRecipClass = MAPI_TO;
+    rCount++;
+  }
+
+  if (ccAddr[0] != '\0')
+  {
+    msgPtr->lpRecips[rCount].lpszName = strdup(ccAddr);
+    msgPtr->lpRecips[rCount].lpszAddress = strdup(ccAddr);
+    msgPtr->lpRecips[rCount].ulRecipClass = MAPI_CC;    
+    rCount++;
+  }
+
+  if (bccAddr[0] != '\0')
+  {
+    msgPtr->lpRecips[rCount].lpszName = strdup(bccAddr);
+    msgPtr->lpRecips[rCount].lpszAddress = strdup(bccAddr);
+    msgPtr->lpRecips[rCount].ulRecipClass = MAPI_BCC;
+    rCount++;
+  }
+
+  // Now get the names of the files to attach...
+  GetDlgItemText(hWnd, ID_EDIT_ATTACH1, file1, sizeof(file1));
+  GetDlgItemText(hWnd, ID_EDIT_ATTACH2, file2, sizeof(file2));
+  GetDlgItemText(hWnd, ID_EDIT_ATTACH3, file3, sizeof(file3));
+  GetDlgItemText(hWnd, ID_EDIT_ATTACH4, file4, sizeof(file4));
+
+  DWORD       realFiles = 0;
+  if (file1[0] != '\0')    ++realFiles;
+  if (file2[0] != '\0')    ++realFiles;
+  if (file3[0] != '\0')    ++realFiles;
+  if (file4[0] != '\0')    ++realFiles;
+
+  // Now deal with the list of attachments! Since the nFileCount should be set
+  // correctly, this loop will automagically be correct
+  //
+  msgPtr->nFileCount = realFiles;
+  if (realFiles > 0)
+  {
+    msgPtr->lpFiles = (lpMapiFileDesc) malloc((size_t) (sizeof(MapiFileDesc) * realFiles));
+    if (!msgPtr->lpFiles)
+    {
+      FreeMAPIMessage(msgPtr);
+      return;
+    }
+
+    memset(msgPtr->lpFiles, 0, (size_t) (sizeof(MapiFileDesc) * msgPtr->nFileCount));
+  }
+
+  rCount = 0;
+  if (file1[0] != '\0')
+  {
+    msgPtr->lpFiles[rCount].lpszPathName = strdup((LPSTR)file1);
+    msgPtr->lpFiles[rCount].lpszFileName = strdup((LPSTR)file1);
+    ++rCount;
+  }
+
+  if (file2[0] != '\0')
+  {
+    msgPtr->lpFiles[rCount].lpszPathName = strdup((LPSTR)file2);
+    msgPtr->lpFiles[rCount].lpszFileName = strdup((LPSTR)file2);
+    ++rCount;
+  }
+
+  if (file3[0] != '\0')
+  {
+    msgPtr->lpFiles[rCount].lpszPathName = strdup((LPSTR)file3);
+    msgPtr->lpFiles[rCount].lpszFileName = strdup((LPSTR)file3);
+    ++rCount;
+  }
+
+  if (file4[0] != '\0')
+  {
+    msgPtr->lpFiles[rCount].lpszPathName = strdup((LPSTR)file4);
+    msgPtr->lpFiles[rCount].lpszFileName = strdup((LPSTR)file4);
+    ++rCount;
+  }
+
+  // Finally, make the call...
+  LONG  rc = (*lpfnMAPISaveMail)
+           (mapiSession, 
+           (ULONG) hWnd, 
+           msgPtr, 
+           flFlags, 
+           0, NULL);
+
+  if (rc == SUCCESS_SUCCESS)
+  {
+    ShowMessage(hWnd, "Success with MAPISaveMail");
+    SetFooter("MAPISaveMail success");
+  }
+  else
+  {
+    wsprintf(msg, "FAILURE: Return code %d from MAPISaveMail\nError=[%s]", 
+                      rc, GetMAPIError(rc));
+    ShowMessage(hWnd, msg);
+    SetFooter("MAPISaveMail failed");
+  }
+
+  // Now cleanup and move on...
+  FreeMAPIMessage(msgPtr);
+}
+
+void          
+DoMAPIAddress(HWND hWnd)
+{
+  ULONG (FAR PASCAL *lpfnMAPIAddress) 
+                            (LHANDLE lhSession,
+                            ULONG ulUIParam,
+                            LPSTR lpszCaption,
+                            ULONG nEditFields,
+                            LPSTR lpszLabels,
+                            ULONG nRecips,
+                            lpMapiRecipDesc lpRecips,
+                            FLAGS flFlags,
+                            ULONG ulReserved,
+                            LPULONG lpnNewRecips,
+                            lpMapiRecipDesc FAR *lppNewRecips);
+
+
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPIAddress = GetProcAddress(m_hInstMapi, "MAPIADDRESS"); 
+#else
+  (FARPROC&) lpfnMAPIAddress = GetProcAddress(m_hInstMapi, "MAPIAddress"); 
+#endif
+  
+  if (!lpfnMAPIAddress)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }          
+
+  DWORD   i;
+  FLAGS   flFlags = 0;
+  DWORD   addrCount = 0;
+  char    msg[512];
+  char    toAddr[128];
+  char    ccAddr[128];
+  char    bccAddr[128];
+
+  GetDlgItemText(hWnd, ID_EDIT_TOADDRESS, toAddr, sizeof(toAddr));
+  GetDlgItemText(hWnd, ID_EDIT_CCADDRESS, ccAddr, sizeof(ccAddr));
+  GetDlgItemText(hWnd, ID_EDIT_BCCADDRESS, bccAddr, sizeof(bccAddr));
+
+  if (toAddr[0]) ++addrCount;
+  if (ccAddr[0]) ++addrCount;
+  if (bccAddr[0]) ++addrCount;
+
+  lpMapiRecipDesc lpRecips = (lpMapiRecipDesc) malloc((size_t) (sizeof(MapiRecipDesc) * addrCount));
+  if (!lpRecips)
+  {
+    return;
+  }
+
+  memset(lpRecips, 0, (size_t) (sizeof(MapiRecipDesc) * addrCount));
+
+  DWORD       rCount = 0;
+  if (toAddr[0] != '\0')
+  {
+    lpRecips[rCount].lpszName = strdup("To Address Name");
+    lpRecips[rCount].lpszAddress = strdup(toAddr);
+    lpRecips[rCount].ulRecipClass = MAPI_TO;
+    rCount++;
+  }
+
+  if (ccAddr[0] != '\0')
+  {
+    lpRecips[rCount].lpszName = strdup("CC Address Name");
+    lpRecips[rCount].lpszAddress = strdup(ccAddr);
+    lpRecips[rCount].ulRecipClass = MAPI_CC;    
+    rCount++;
+  }
+
+  if (bccAddr[0] != '\0')
+  {
+    lpRecips[rCount].lpszName = strdup("BCC Address Name");
+    lpRecips[rCount].lpszAddress = strdup(bccAddr);
+    lpRecips[rCount].ulRecipClass = MAPI_BCC;
+    rCount++;
+  }
+  
+  ULONG             newRecips;
+  lpMapiRecipDesc   lpNewRecips;
+
+  // Finally, make the call...
+  LONG  rc = (*lpfnMAPIAddress)
+                     (mapiSession,
+                      0,
+                      "MAPI Test Address Picker",
+                      0,
+                      NULL,
+                      rCount,
+                      lpRecips,
+                      0,
+                      0,
+                      &newRecips,
+                      &lpNewRecips);
+  if (rc == SUCCESS_SUCCESS)
+  {
+    for (i=0; i<newRecips; i++)
+    {
+      char  tMsg[512];
+
+      wsprintf(tMsg, "User %d\nName=[%s]\nEmail=[%s]\nType=[%d]", 
+            i, 
+            lpNewRecips[i].lpszName, 
+            lpNewRecips[i].lpszAddress, 
+            lpNewRecips[i].ulRecipClass);
+      ShowMessage(hWnd, tMsg);
+    }
+
+    SetFooter("MAPIAddress success");
+
+    DoMAPIFreeBuffer(hWnd, lpNewRecips, TRUE);
+  }
+  else
+  {
+    wsprintf(msg, "FAILURE: Return code %d from MAPIAddress\nError=[%s]", 
+                      rc, GetMAPIError(rc));
+    ShowMessage(hWnd, msg);
+    SetFooter("MAPIAddress failed");
+  }
+
+  // Now cleanup and move on...
+  for (i=0; i<rCount; i++)
+  {
+    FreeMAPIRecipient(&(lpRecips[i]));
+  }
+}

mozilla/mailnews/mapi/old/tests/mapitest/mapiproc.cpp

@@ -0,0 +1,832 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+#include <windows.h>
+#include <windowsx.h>      
+#include <string.h>
+
+#ifndef MAPI_OLE	// Because MSFT doesn't do this for us :-(
+#include <mapi.h>
+#endif
+
+#include "port.h"
+#include "resource.h"
+
+//
+// Variables...
+// 
+extern HINSTANCE  hInst;
+HINSTANCE         m_hInstMapi;
+LHANDLE           mapiSession = 0;
+
+// 
+// Forward declarations...
+//
+void    LoadNSCPVersionFunc(HWND hWnd);
+void    DoMAPILogon(HWND hWnd);
+void    DoMAPILogoff(HWND hWnd);
+void    DoMAPIFreeBuffer(HWND hWnd, LPVOID buf, BOOL alert);
+void    DoMAPISendMail(HWND hWnd);
+void    DoMAPISendDocuments(HWND hWnd);
+void    DoMAPIFindNext(HWND hWnd);
+void    DoMAPIReadMail(HWND hWnd);
+void    DoMAPIDeleteMail(HWND hWnd);
+void    DoMAPIDetails(HWND hWnd);
+void    DoMAPIResolveName(HWND hWnd);
+void    DoMAPIResolveNameFreeBuffer(HWND hWnd);
+void    SetFooter(LPSTR msg);
+void    DoMAPI_NSCP_Sync(HWND hWnd);
+LPSTR   GetMAPIError(LONG errorCode);
+extern void DisplayMAPIReadMail(HWND hWnd, lpMapiMessage msgPtr);
+lpMapiMessage   GetMessage(HWND hWnd, LPSTR id);
+
+void
+SetFooter(LPSTR msg)
+{
+  extern HWND   hWnd;
+
+  SetDlgItemText(hWnd, ID_STATIC_RESULT, msg);
+}
+
+char FAR *
+GetMAPIError(LONG errorCode)
+{
+  static char FAR msg[128];
+
+  switch (errorCode) {                            
+  case MAPI_E_FAILURE:
+    lstrcpy(msg, "General MAPI Failure");
+    break;
+
+  case MAPI_E_INSUFFICIENT_MEMORY:
+    strcpy(msg, "Insufficient Memory");
+    break;
+
+  case MAPI_E_LOGIN_FAILURE:
+    strcpy(msg, "Login Failure");
+    break;
+
+  case MAPI_E_TOO_MANY_SESSIONS:
+    strcpy(msg, "Too many MAPI sessions");
+    break;
+
+  case MAPI_E_INVALID_SESSION:
+    strcpy(msg, "Invalid Session!");
+    break;
+
+  case MAPI_E_INVALID_MESSAGE:
+    strcpy(msg, "Message identifier was bad!");
+    break;
+
+  case MAPI_E_NO_MESSAGES:
+    strcpy(msg, "No messages were found!");
+    break;
+
+  case MAPI_E_ATTACHMENT_WRITE_FAILURE:
+    strcpy(msg, "Attachment write failure!");
+    break;
+
+  case MAPI_E_DISK_FULL:
+    strcpy(msg, "Attachment write failure! DISK FULL");
+    break;
+
+  case MAPI_E_AMBIGUOUS_RECIPIENT:
+    strcpy(msg, "Recipient requested is not a unique address list entry.");
+    break;
+
+  case MAPI_E_UNKNOWN_RECIPIENT:
+    strcpy(msg, "Recipient requested does not exist.");
+    break;
+
+  case MAPI_E_NOT_SUPPORTED:
+    strcpy(msg, "Not supported by messaging system");
+    break;
+
+  case SUCCESS_SUCCESS:
+    strcpy(msg, "Success on MAPI operation");
+    break;
+
+  case MAPI_E_INVALID_RECIPS:
+    strcpy(msg, "Recipient specified in the lpRecip parameter was\nunknown. No dialog box was displayed.");
+    break;
+
+  case MAPI_E_ATTACHMENT_OPEN_FAILURE:
+    strcpy(msg, "One or more files could not be located. No message was sent.");    
+    break;
+
+  case MAPI_E_ATTACHMENT_NOT_FOUND:
+    strcpy(msg, "The specified attachment was not found. No message was sent.");
+    break;
+
+  case MAPI_E_BAD_RECIPTYPE:
+    strcpy(msg, "The type of a recipient was not MAPI_TO, MAPI_CC, or MAPI_BCC. No message was sent.");
+    break;
+
+  default:
+    strcpy(msg, "Unknown MAPI Return Code");
+    break;
+  }
+
+  return((LPSTR) &(msg[0]));
+}
+
+void
+ShowMessage(HWND hWnd, LPSTR msg)
+{
+  MessageBox(hWnd, msg, "Info Message", MB_ICONINFORMATION);
+}
+
+BOOL
+OpenMAPI(void)
+{
+#ifdef WIN16
+	m_hInstMapi = LoadLibrary("Y:\\ns\\cmd\\winfe\\mapi\\MAPI.DLL");	
+#else
+  m_hInstMapi = LoadLibrary(".\\COMPONENTS\\MAPI32.DLL");
+#endif
+
+  if (!m_hInstMapi)
+  {
+    ShowMessage(NULL, "Error Loading the MAPI DLL...Probably not found!");
+    return(FALSE);
+  }
+
+  return(TRUE);
+}
+
+void
+CloseMAPI(void)
+{
+  if(m_hInstMapi)
+  {
+    FreeLibrary(m_hInstMapi);
+  }
+}
+
+void 
+ProcessCommand(HWND hWnd, int id, HWND hCtl, UINT codeNotify) 
+{ 
+  switch (id) 
+  {
+  case ID_BUTTON_SYNC:
+    DoMAPI_NSCP_Sync(hWnd);
+    break;
+
+  case ID_BUTTON_NSCPVERSION:
+    LoadNSCPVersionFunc(hWnd);
+    break;
+
+  case ID_BUTTON_LOGON:
+    DoMAPILogon(hWnd);
+    break;
+
+  case ID_BUTTON_LOGOFF:
+    DoMAPILogoff(hWnd);
+    break;
+
+  case ID_BUTTON_FINDNEXT:
+  case ID_MENU_MAPIFINDNEXT:
+    DoMAPIFindNext(hWnd);
+    break;
+
+  case ID_BUTTON_READMAIL:
+  case ID_MENU_MAPIREADMAIL:
+    DoMAPIReadMail(hWnd);
+    break;
+
+  case ID_BUTTON_MAIL:
+    {
+    extern CALLBACK LOADDS 
+           MailDlgProc(HWND hWndMain, UINT wMsg, WPARAM wParam, LPARAM lParam);
+
+    DialogBox(hInst, MAKEINTRESOURCE(ID_DIALOG_MAIL), hWnd, 
+      (DLGPROC)MailDlgProc);
+    }
+    break;
+
+  case ID_BUTTON_DELETEMAIL:
+  case ID_MENU_MAPIDELETEMAIL:
+    DoMAPIDeleteMail(hWnd);
+    break;
+
+  case ID_MENU_MYEXIT:
+	  DestroyWindow(hWnd);
+	  break;
+
+  case ID_BUTTON_CLEAR:
+  case ID_MENU_CLEARRESULTS:
+    ListBox_ResetContent(GetDlgItem(hWnd, ID_LIST_RESULT));      
+	  break;
+
+  case ID_BUTTON_FREEBUFFER:
+    DoMAPIResolveNameFreeBuffer(hWnd);
+    break;
+
+  case ID_BUTTON_RESOLVENAME:
+    DoMAPIResolveName(hWnd);
+    break;
+
+  case ID_BUTTON_DETAILS:
+    DoMAPIDetails(hWnd);
+    break;
+
+  case ID_MENU_MYABOUT:
+	  MessageBox(hWnd,	
+			  "Netscape MAPI Test Harness\nWritten by: Rich Pizzarro (rhp@netscape.com)",	
+			  "About",
+			  MB_ICONINFORMATION);
+	  break;
+  
+  default:
+    break;
+  }
+}
+
+void
+DoMAPILogon(HWND hWnd)
+{
+  char  msg[1024];
+  char  user[128] = "";
+  char  pw[128] = "";
+
+  // Get Address of MAPI function...
+  ULONG (FAR PASCAL *lpfnMAPILogon)(ULONG, LPSTR, LPSTR, FLAGS, ULONG, LPLHANDLE);   
+  
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPILogon = GetProcAddress(m_hInstMapi, "MAPILOGON"); 
+#else
+  (FARPROC&) lpfnMAPILogon = GetProcAddress(m_hInstMapi, "MAPILogon"); 
+#endif
+  
+  if (!lpfnMAPILogon)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }
+
+  GetDlgItemText(hWnd, ID_EDIT_USERNAME, user, sizeof(user));
+  GetDlgItemText(hWnd, ID_EDIT_PW, pw, sizeof(pw));
+
+  LONG  rc = (*lpfnMAPILogon)((ULONG) hWnd, user, pw, 
+                  MAPI_FORCE_DOWNLOAD | MAPI_NEW_SESSION, 0, &mapiSession);
+  if (rc == SUCCESS_SUCCESS)
+  {
+    wsprintf(msg, "Success with session = %d", mapiSession);
+    ShowMessage(hWnd, msg);
+    SetFooter("Logon success");
+  }
+  else
+  {
+    wsprintf(msg, "FAILURE: Return code %d from Logon\nError=[%s]", 
+                      rc, GetMAPIError(rc));
+    ShowMessage(hWnd, msg);
+    SetFooter("Logon failed");
+  }
+}
+
+void
+DoMAPILogoff(HWND hWnd)
+{
+  ULONG (FAR PASCAL *lpfnMAPILogoff) ( LHANDLE lhSession, ULONG ulUIParam, 
+                                FLAGS flFlags, ULONG ulReserved);
+
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPILogoff = GetProcAddress(m_hInstMapi, "MAPILOGOFF"); 
+#else
+  (FARPROC&) lpfnMAPILogoff = GetProcAddress(m_hInstMapi, "MAPILogoff"); 
+#endif
+  
+  if (!lpfnMAPILogoff)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }
+
+  char  msg[1024];
+  LONG  rc = (*lpfnMAPILogoff)(mapiSession, (ULONG) hWnd, 0, 0);
+  if (rc == SUCCESS_SUCCESS)
+  {
+    wsprintf(msg, "Successful logoff");
+    ShowMessage(hWnd, msg);
+    SetFooter(msg);
+  }
+  else
+  {
+    wsprintf(msg, "FAILURE: Return code %d from Logoff\nError=[%s]", 
+                      rc, GetMAPIError(rc));
+
+    ShowMessage(hWnd, msg);
+    SetFooter("Logoff failed");
+  }
+
+  mapiSession = 0;
+}
+
+void
+DoMAPIFreeBuffer(HWND hWnd, LPVOID buf, BOOL alert)
+{
+  ULONG (FAR PASCAL *lpfnMAPIFreeBuffer) (LPVOID lpBuffer);
+
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPIFreeBuffer = GetProcAddress(m_hInstMapi, "MAPIFREEBUFFER"); 
+#else
+  (FARPROC&) lpfnMAPIFreeBuffer = GetProcAddress(m_hInstMapi, "MAPIFreeBuffer"); 
+#endif
+  
+  if (!lpfnMAPIFreeBuffer)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }
+
+  char  msg[1024];
+  LONG  rc = (*lpfnMAPIFreeBuffer)(buf);
+#ifdef WIN32
+  if (rc == S_OK)
+#else
+  if (rc == SUCCESS_SUCCESS)
+#endif
+  {
+    wsprintf(msg, "Successful Free Buffer Operation");
+    if (alert)
+      ShowMessage(hWnd, msg);
+  }
+  else
+  {
+    wsprintf(msg, "FAILURE: Return code %d from Logoff", rc);
+    ShowMessage(hWnd, msg);
+  }
+}
+
+void
+DoMAPIFindNext(HWND hWnd)
+{
+  ULONG (FAR PASCAL *lpfnMAPIFindNext) (LHANDLE lhSession, ULONG ulUIParam, 
+           LPTSTR lpszMessageType, LPTSTR lpszSeedMessageID, FLAGS flFlags, 
+           ULONG ulReserved, LPTSTR lpszMessageID);
+
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPIFindNext = GetProcAddress(m_hInstMapi, "MAPIFINDNEXT"); 
+#else
+  (FARPROC&) lpfnMAPIFindNext = GetProcAddress(m_hInstMapi, "MAPIFindNext"); 
+#endif
+
+  if (!lpfnMAPIFindNext)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }
+
+  // Clear the list before we start...
+  ListBox_ResetContent(GetDlgItem(hWnd, ID_LIST_RESULT));
+
+  char  msg[1024];
+  char  messageID[512];
+  LONG  rc;                                                               
+#ifdef WIN32
+  FLAGS	flags = MAPI_GUARANTEE_FIFO | MAPI_LONG_MSGID | MAPI_UNREAD_ONLY;
+#else                                                                     	
+  FLAGS	flags = MAPI_GUARANTEE_FIFO | MAPI_UNREAD_ONLY;
+#endif
+  
+  while ( (rc = (*lpfnMAPIFindNext) (mapiSession, 
+           (ULONG) hWnd, 
+           NULL, 
+           NULL, 
+		   flags,
+           0,
+           messageID)) == SUCCESS_SUCCESS)
+  {
+      // 
+
+      lpMapiMessage mapiMsg = GetMessage(hWnd, messageID);
+      if (mapiMsg != NULL)
+      {
+        wsprintf(msg, "%s: \"%s\" Sender: %s", 
+                  messageID, 
+                  mapiMsg->lpszSubject, 
+                  mapiMsg->lpOriginator->lpszName);
+        DoMAPIFreeBuffer(hWnd, mapiMsg, FALSE);
+      }
+      else
+      {
+        lstrcpy(msg, messageID);
+      }
+
+      ListBox_InsertString(GetDlgItem(hWnd, ID_LIST_RESULT), 0, msg);
+  }
+
+  wsprintf(msg, "Enumeration ended: Return code %d from MAPIFindNext\nCondition=[%s]", 
+                    rc, GetMAPIError(rc));
+  ShowMessage(hWnd, msg);
+  SetFooter("Enumeration ended");
+}
+
+void
+DoMAPIReadMail(HWND hWnd)
+{
+  ULONG (FAR PASCAL *lpfnMAPIReadMail) (LHANDLE lhSession, ULONG ulUIParam, 
+           LPTSTR lpszMessageID, FLAGS flFlags, ULONG ulReserved, 
+           lpMapiMessage FAR * lppMessage);
+
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPIReadMail = GetProcAddress(m_hInstMapi, "MAPIREADMAIL"); 
+#else
+  (FARPROC&) lpfnMAPIReadMail = GetProcAddress(m_hInstMapi, "MAPIReadMail"); 
+#endif
+  
+  if (!lpfnMAPIReadMail)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }
+
+  char            msg[1024];
+  char            lpszMessageID[512];
+  lpMapiMessage   lpMessage = NULL;
+  FLAGS           flFlags = 0;
+
+  DWORD selected = ListBox_GetCurSel(GetDlgItem(hWnd, ID_LIST_RESULT));
+  if (selected == LB_ERR)
+  {
+    ShowMessage(hWnd, "You need to select a valid message. Make sure\nyou have done a MAPIFindNext and selected\none of the resulting messages.");
+    return;
+  }
+
+  ListBox_GetText(GetDlgItem(hWnd, ID_LIST_RESULT), selected, lpszMessageID);
+
+  // Do the various flags for this call...
+  if (BST_CHECKED == Button_GetCheck(GetDlgItem(hWnd, IDC_CHECK_BODYASFILE)))
+  {
+    flFlags |= MAPI_BODY_AS_FILE;
+  }
+
+  if (BST_CHECKED == Button_GetCheck(GetDlgItem(hWnd, IDC_CHECK_ENVELOPEONLY)))
+  {
+    flFlags |= MAPI_ENVELOPE_ONLY;
+  }
+
+  if (BST_CHECKED == Button_GetCheck(GetDlgItem(hWnd, IDC_CHECK_PEEK)))
+  {
+    flFlags |= MAPI_PEEK;
+  }
+  
+  if (BST_CHECKED == Button_GetCheck(GetDlgItem(hWnd, IDC_CHECK_SUPPRESSATTACH)))
+  {
+    flFlags |= MAPI_SUPPRESS_ATTACH;
+  }
+
+  char *ptr = strchr( (const char *) lpszMessageID, ':');
+  if (ptr) *ptr = '\0';
+
+  LONG  rc = (*lpfnMAPIReadMail)
+          (mapiSession, 
+          (ULONG) hWnd, 
+          lpszMessageID,
+          flFlags,
+          0, 
+          &lpMessage);
+
+  // Deal with error up front and return if need be...
+  if (rc != SUCCESS_SUCCESS)
+  {
+    wsprintf(msg, "FAILURE: Return code %d from MAPIReadMail\nError=[%s]", 
+                      rc, GetMAPIError(rc));
+
+    ShowMessage(hWnd, msg);
+    SetFooter("ReadMail failed");
+    return;
+  }
+
+  // Now display the message and then return...
+  DisplayMAPIReadMail(hWnd, lpMessage);
+  DoMAPIFreeBuffer(hWnd, lpMessage, TRUE);
+}
+
+void
+DoMAPIDeleteMail(HWND hWnd)
+{
+  ULONG (FAR PASCAL *lpfnMAPIDeleteMail) (LHANDLE lhSession, ULONG ulUIParam, 
+            LPTSTR lpszMessageID, FLAGS flFlags, ULONG ulReserved);
+
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPIDeleteMail = GetProcAddress(m_hInstMapi, "MAPIDELETEMAIL"); 
+#else
+  (FARPROC&) lpfnMAPIDeleteMail = GetProcAddress(m_hInstMapi, "MAPIDeleteMail"); 
+#endif
+  
+  if (!lpfnMAPIDeleteMail)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }
+ 
+  char            msg[1024];
+  char            lpszMessageID[512];
+  lpMapiMessage   lpMessage = NULL;
+
+  DWORD selected = ListBox_GetCurSel(GetDlgItem(hWnd, ID_LIST_RESULT));
+  if (selected == LB_ERR)
+  {
+    ShowMessage(hWnd, "You need to select a valid message. Make sure\nyou have done a MAPIFindNext and selected\none of the resulting messages.");
+    return;
+  }
+
+  ListBox_GetText(GetDlgItem(hWnd, ID_LIST_RESULT), selected, lpszMessageID);
+
+  char *ptr = strchr( (const char *) lpszMessageID, ':');
+  if (ptr) *ptr = '\0';
+
+  LONG  rc = (*lpfnMAPIDeleteMail)
+          (mapiSession, 
+          (ULONG) hWnd,
+          lpszMessageID, 
+          0,
+          0);
+  
+  // Deal with the return code...
+  if (rc == SUCCESS_SUCCESS)
+  {
+    wsprintf(msg, "Successful deletion");
+    ShowMessage(hWnd, msg);
+    SetFooter(msg);  
+
+    // If it worked, refresh the list...
+    ShowMessage(hWnd, "The message list will now be refreshed\nsince one message was deleted.");
+    DoMAPIFindNext(hWnd);
+  }
+  else
+  {
+    wsprintf(msg, "FAILURE: Return code %d from MAPIDeleteMail\nError=[%s]", 
+                      rc, GetMAPIError(rc));
+
+    ShowMessage(hWnd, msg);
+    SetFooter("Logoff failed");
+  }
+}
+
+// This is for the name lookup stuff...
+lpMapiRecipDesc       lpRecip = NULL;
+
+void
+DoMAPIResolveName(HWND hWnd)
+{
+  ULONG (FAR PASCAL *lpfnMAPIResolveName) (LHANDLE lhSession, ULONG ulUIParam, 
+            LPTSTR lpszName, FLAGS flFlags, ULONG ulReserved, 
+            lpMapiRecipDesc FAR * lppRecip); 
+
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPIResolveName = GetProcAddress(m_hInstMapi, "MAPIRESOLVENAME"); 
+#else
+  (FARPROC&) lpfnMAPIResolveName = GetProcAddress(m_hInstMapi, "MAPIResolveName"); 
+#endif
+  
+  if (!lpfnMAPIResolveName)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }
+
+  if (lpRecip != NULL)
+  {
+    ShowMessage(hWnd, "We need to free memory from a previous call...");
+    DoMAPIFreeBuffer(hWnd, lpRecip, TRUE);
+    lpRecip = NULL;
+  }
+
+  char        userName[512];
+  char        msg[1024];
+  FLAGS       flFlags = 0;    // We support none...
+
+  GetDlgItemText(hWnd, IDC_EDIT_RESOLVENAME, userName, sizeof(userName));
+  LONG  rc = (*lpfnMAPIResolveName)
+                      (mapiSession, 
+                       (ULONG) hWnd, 
+                       userName,
+                       flFlags, 
+                       0, 
+                       &lpRecip);
+
+  // Deal with error up front and return if need be...
+  if (rc != SUCCESS_SUCCESS)
+  {
+    wsprintf(msg, "FAILURE: Return code %d from DoMAPIResolveName\nError=[%s]", 
+                      rc, GetMAPIError(rc));
+
+    ShowMessage(hWnd, msg);
+    SetFooter("DoMAPIResolveName failed");
+    return;
+  }
+
+  // If we get here, we should probably show the information that we
+  // got back
+  wsprintf(msg, "Received information for %s\nName=[%s]\nAddress=[%s]\nID=[%s]",
+    userName, lpRecip->lpszName, lpRecip->lpszAddress, (LPSTR) lpRecip->lpEntryID);
+  ShowMessage(hWnd, msg);
+}
+
+void    
+DoMAPIResolveNameFreeBuffer(HWND hWnd)
+{
+  if (lpRecip == NULL)
+  {
+    ShowMessage(hWnd, "There is no memory allocated from MAPIResolveName()\nto be freed. Request ignored.");
+  }
+  else
+  {
+    DoMAPIFreeBuffer(hWnd, lpRecip, TRUE);
+    lpRecip = NULL;
+  }
+}
+
+void
+DoMAPIDetails(HWND hWnd)
+{
+  ULONG (FAR PASCAL *lpfnMAPIDetails) (LHANDLE lhSession, ULONG ulUIParam, 
+            lpMapiRecipDesc lpRecip, FLAGS flFlags, ULONG ulReserved);
+
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPIDetails = GetProcAddress(m_hInstMapi, "MAPIDetails"); 
+#else
+  (FARPROC&) lpfnMAPIDetails = GetProcAddress(m_hInstMapi, "MAPIDetails"); 
+#endif
+  
+  if (!lpfnMAPIDetails)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }
+
+  char        msg[1024];
+  FLAGS       flFlags = 0;    // We really don't support these...
+
+  LONG  rc = (*lpfnMAPIDetails)
+              (mapiSession, 
+              (ULONG) hWnd,
+               lpRecip,
+               flFlags,
+               0);
+
+  if (rc == SUCCESS_SUCCESS)
+  {
+
+    wsprintf(msg, "MAPIDetails call succeeded");
+    ShowMessage(hWnd, msg);
+    SetFooter(msg);
+  }
+  else
+  {
+
+    wsprintf(msg, "FAILURE: Return code %d from MAPIDetails\nError=[%s]", 
+                      rc, GetMAPIError(rc));
+
+    if (lpRecip == NULL)
+    {
+      lstrcat(msg, "\nNOTE: There is no valid pointer from a MAPIResolveName()\ncall to show details about.");
+    }
+
+    ShowMessage(hWnd, msg);
+    SetFooter("MAPIDetails failed");
+  }
+}
+
+lpMapiMessage 
+GetMessage(HWND hWnd, LPSTR id)
+{
+  ULONG (FAR PASCAL *lpfnMAPIReadMail) (LHANDLE lhSession, ULONG ulUIParam, 
+           LPTSTR lpszMessageID, FLAGS flFlags, ULONG ulReserved, 
+           lpMapiMessage FAR * lppMessage);
+
+#ifdef WIN16		
+  (FARPROC&) lpfnMAPIReadMail = GetProcAddress(m_hInstMapi, "MAPIREADMAIL"); 
+#else
+  (FARPROC&) lpfnMAPIReadMail = GetProcAddress(m_hInstMapi, "MAPIReadMail"); 
+#endif
+  
+  if (!lpfnMAPIReadMail)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return NULL;
+  }
+
+  char            msg[1024];
+  lpMapiMessage   lpMessage = NULL;
+  FLAGS           flFlags = 0;
+
+  flFlags |= MAPI_ENVELOPE_ONLY;
+  LONG  rc = (*lpfnMAPIReadMail)
+          (mapiSession, 
+          (ULONG) hWnd, 
+          id,
+          flFlags,
+          0, 
+          &lpMessage);
+
+  // Deal with error up front and return if need be...
+  if (rc != SUCCESS_SUCCESS)
+  {
+    wsprintf(msg, "FAILURE: Return code %d from MAPIReadMail\nError=[%s]", 
+                      rc, GetMAPIError(rc));
+
+    ShowMessage(hWnd, msg);
+    SetFooter("ReadMail failed");
+    return NULL;
+  }
+
+  return(lpMessage);
+}
+
+void    
+LoadNSCPVersionFunc(HWND hWnd)
+{
+  ULONG (FAR PASCAL *lpfnLoadNSCPVersion) ( void );
+
+#ifdef WIN16		
+  (FARPROC&) lpfnLoadNSCPVersion = GetProcAddress(m_hInstMapi, "MAPIGETNERSCAPEVERSION"); 
+#else
+  (FARPROC&) lpfnLoadNSCPVersion = GetProcAddress(m_hInstMapi, "MAPIGetNetscapeVersion"); 
+#endif
+  
+  if (!lpfnLoadNSCPVersion)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPIGetNetscapeVersion() function.");
+  }
+  else
+  {
+    ShowMessage(hWnd, "MAPIGetNetscapeVersion() function was FOUND!");
+  }
+  return;
+}
+
+void    
+DoMAPI_NSCP_Sync(HWND hWnd)
+{
+ULONG (FAR PASCAL *lpfnNSCPSync) ( LHANDLE lhSession,
+                                          ULONG ulReserved );
+#ifdef WIN16		
+  (FARPROC&) lpfnNSCPSync = GetProcAddress(m_hInstMapi, "MAPI_NSCP_SYNCHRONIZECLIENT"); 
+#else
+  (FARPROC&) lpfnNSCPSync = GetProcAddress(m_hInstMapi, "MAPI_NSCP_SynchronizeClient"); 
+#endif
+
+  if (!lpfnNSCPSync)
+  {
+    ShowMessage(hWnd, "Unable to locate MAPI function.");
+    return;
+  }
+
+  LONG  rc = (*lpfnNSCPSync) (mapiSession, 0);
+
+  char    msg[256];
+
+  // Deal with error up front and return if need be...
+  if (rc != SUCCESS_SUCCESS)
+  {
+    wsprintf(msg, "FAILURE: Return code %d from MAPI_NSCP_SynchronizeClient\nError=[%s]", 
+                      rc, GetMAPIError(rc));
+
+    ShowMessage(hWnd, msg);
+    SetFooter("MAPI_NSCP_SynchronizeClient failed");
+    return;
+  }
+  else
+  {
+    wsprintf(msg, "Success for MAPI_NSCP_SynchronizeClient");    
+    ShowMessage(hWnd, msg);
+    SetFooter("MAPI_NSCP_SynchronizeClient success");
+  }
+}

mozilla/mailnews/mapi/old/tests/mapitest/mapitest.dep

@@ -0,0 +1,25 @@
+# Microsoft Developer Studio Generated Dependency File, included by mapitest.mak
+
+.\main.cpp : \
+	".\port.h"\
+	"c:\program files\msdev\vc98\include\basetsd.h"\
+	
+
+.\mapimail.cpp : \
+	".\port.h"\
+	"c:\program files\msdev\vc98\include\basetsd.h"\
+	
+
+.\mapiproc.cpp : \
+	".\port.h"\
+	"c:\program files\msdev\vc98\include\basetsd.h"\
+	
+
+.\mtest32.rc : \
+	".\nscicon.ico"\
+	
+
+.\readmail.cpp : \
+	".\port.h"\
+	"c:\program files\msdev\vc98\include\basetsd.h"\
+	

mozilla/mailnews/mapi/old/tests/mapitest/mapitest.dsp

@@ -0,0 +1,121 @@
+# Microsoft Developer Studio Project File - Name="mapitest" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Application" 0x0101
+
+CFG=mapitest - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "mapitest.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "mapitest.mak" CFG="mapitest - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "mapitest - Win32 Release" (based on "Win32 (x86) Application")
+!MESSAGE "mapitest - Win32 Debug" (based on "Win32 (x86) Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+MTL=midl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "mapitest - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /YX /FD /c
+# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /YX /FD /c
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /machine:I386
+
+!ELSEIF  "$(CFG)" == "mapitest - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /YX /FD /GZ /c
+# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /YX /FD /GZ /c
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
+
+!ENDIF 
+
+# Begin Target
+
+# Name "mapitest - Win32 Release"
+# Name "mapitest - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=.\main.cpp
+# End Source File
+# Begin Source File
+
+SOURCE=.\mapimail.cpp
+# End Source File
+# Begin Source File
+
+SOURCE=.\mapiproc.cpp
+# End Source File
+# Begin Source File
+
+SOURCE=.\mtest32.rc
+# End Source File
+# Begin Source File
+
+SOURCE=.\readmail.cpp
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

mozilla/mailnews/mapi/old/tests/mapitest/mapitest.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "mapitest"=.\mapitest.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

mozilla/mailnews/mapi/old/tests/mapitest/mapitest.plg

@@ -0,0 +1,44 @@
+<html>
+<body>
+<pre>
+<h1>Build Log</h1>
+<h3>
+--------------------Configuration: mapitest - Win32 Debug--------------------
+</h3>
+<h3>Command Lines</h3>
+Creating command line "rc.exe /l 0x409 /fo"Debug/mtest32.res" /d "_DEBUG" "Y:\mozilla\mailnews\mapi\tests\mapitest\mtest32.rc"" 
+Creating temporary file "C:\TEMP\RSP38A.tmp" with contents
+[
+/nologo /MLd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /Fp"Debug/mapitest.pch" /YX /Fo"Debug/" /Fd"Debug/" /FD /GZ /c 
+"Y:\mozilla\mailnews\mapi\tests\mapitest\readmail.cpp"
+"Y:\mozilla\mailnews\mapi\tests\mapitest\mapimail.cpp"
+"Y:\mozilla\mailnews\mapi\tests\mapitest\mapiproc.cpp"
+"Y:\mozilla\mailnews\mapi\tests\mapitest\main.cpp"
+]
+Creating command line "cl.exe @C:\TEMP\RSP38A.tmp" 
+Creating temporary file "C:\TEMP\RSP38B.tmp" with contents
+[
+kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /incremental:yes /pdb:"Debug/mapitest.pdb" /debug /machine:I386 /out:"Debug/mapitest.exe" /pdbtype:sept 
+.\Debug\readmail.obj
+.\Debug\mapimail.obj
+.\Debug\mapiproc.obj
+.\Debug\mtest32.res
+.\Debug\main.obj
+]
+Creating command line "link.exe @C:\TEMP\RSP38B.tmp"
+<h3>Output Window</h3>
+Compiling resources...
+Compiling...
+readmail.cpp
+mapimail.cpp
+mapiproc.cpp
+main.cpp
+Linking...
+
+
+
+<h3>Results</h3>
+mapitest.exe - 0 error(s), 0 warning(s)
+</pre>
+</body>
+</html>

mozilla/mailnews/mapi/old/tests/mapitest/mtest32.rc

@@ -0,0 +1,245 @@
+//Microsoft Developer Studio generated resource script.
+//
+#include "resource.h"
+
+#define APSTUDIO_READONLY_SYMBOLS
+/////////////////////////////////////////////////////////////////////////////
+//
+// Generated from the TEXTINCLUDE 2 resource.
+//
+#include "afxres.h"
+
+/////////////////////////////////////////////////////////////////////////////
+#undef APSTUDIO_READONLY_SYMBOLS
+
+/////////////////////////////////////////////////////////////////////////////
+// English (U.S.) resources
+
+#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_ENU)
+#ifdef _WIN32
+LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
+#pragma code_page(1252)
+#endif //_WIN32
+
+/////////////////////////////////////////////////////////////////////////////
+//
+// Dialog
+//
+
+ID_DIALOG DIALOG DISCARDABLE  0, 0, 344, 229
+STYLE DS_MODALFRAME | WS_MINIMIZEBOX | WS_POPUP | WS_CAPTION | WS_SYSMENU
+CAPTION "Netscape MAPI Test Harness"
+MENU ID_MENU
+FONT 8, "MS Sans Serif"
+BEGIN
+    GROUPBOX        "Open/Close",IDC_STATIC,4,4,336,27
+    LTEXT           "User:",IDC_STATIC,9,17,18,11
+    EDITTEXT        ID_EDIT_USERNAME,28,15,41,12,ES_AUTOHSCROLL
+    LTEXT           "Password:",IDC_STATIC,74,17,38,11
+    EDITTEXT        ID_EDIT_PW,112,15,41,12,ES_PASSWORD | ES_AUTOHSCROLL
+    PUSHBUTTON      "MAPILogon",ID_BUTTON_LOGON,157,13,46,14
+    PUSHBUTTON      "MAPILogoff",ID_BUTTON_LOGOFF,209,13,46,14
+    GROUPBOX        "Mail Operations",IDC_STATIC,4,36,336,142
+    PUSHBUTTON      "MAPIFindNext",ID_BUTTON_FINDNEXT,17,50,57,14
+    PUSHBUTTON      "MAPIDeleteMail",ID_BUTTON_DELETEMAIL,80,50,57,14
+    PUSHBUTTON      "Clear Results",ID_BUTTON_CLEAR,143,50,57,14
+    PUSHBUTTON      "Send Mail",ID_BUTTON_MAIL,206,50,57,14
+    LISTBOX         ID_LIST_RESULT,9,66,325,56,LBS_SORT | 
+                    LBS_NOINTEGRALHEIGHT | WS_VSCROLL | WS_HSCROLL | 
+                    WS_TABSTOP
+    GROUPBOX        "User Information",IDC_STATIC,4,181,336,28
+    PUSHBUTTON      "MAPIResolveName",ID_BUTTON_RESOLVENAME,9,192,68,14
+    EDITTEXT        IDC_EDIT_RESOLVENAME,82,192,130,14,ES_AUTOHSCROLL
+    PUSHBUTTON      "MAPIDetails",ID_BUTTON_DETAILS,219,192,48,14
+    LTEXT           "",ID_STATIC_RESULT,4,214,336,13,SS_SUNKEN
+    PUSHBUTTON      "MAPIReadMail",ID_BUTTON_READMAIL,34,142,57,14
+    CONTROL         "MAPI_BODY_AS_FILE - Body as attachment",
+                    IDC_CHECK_BODYASFILE,"Button",BS_AUTOCHECKBOX | 
+                    WS_TABSTOP,121,125,188,9
+    CONTROL         "MAPI_ENVELOPE_ONLY - Header information only",
+                    IDC_CHECK_ENVELOPEONLY,"Button",BS_AUTOCHECKBOX | 
+                    WS_TABSTOP,121,138,188,9
+    CONTROL         "MAPI_PEEK - Don't mark message as read",IDC_CHECK_PEEK,
+                    "Button",BS_AUTOCHECKBOX | WS_TABSTOP,121,151,188,9
+    CONTROL         "MAPI_SUPPRESS_ATTACH - Suppress attachments",
+                    IDC_CHECK_SUPPRESSATTACH,"Button",BS_AUTOCHECKBOX | 
+                    WS_TABSTOP,121,164,188,9
+    PUSHBUTTON      "<- MAPIFreeBuffer",ID_BUTTON_FREEBUFFER,272,192,63,14
+    PUSHBUTTON      "MAPIGetNSCPVersion",ID_BUTTON_NSCPVERSION,261,13,76,14
+    PUSHBUTTON      "Synchronize",ID_BUTTON_SYNC,269,50,57,14
+END
+
+ID_DIALOG_MAIL DIALOG DISCARDABLE  0, 0, 285, 246
+STYLE DS_MODALFRAME | WS_POPUP | WS_CAPTION | WS_SYSMENU
+CAPTION "Composition"
+FONT 8, "MS Sans Serif"
+BEGIN
+    GROUPBOX        "Address Information",IDC_STATIC,4,4,275,55
+    LTEXT           "To:",IDC_STATIC,21,19,12,8
+    EDITTEXT        ID_EDIT_TOADDRESS,36,16,239,13,ES_AUTOHSCROLL
+    EDITTEXT        ID_EDIT_CCADDRESS,36,30,239,13,ES_AUTOHSCROLL
+    EDITTEXT        ID_EDIT_BCCADDRESS,36,44,239,13,ES_AUTOHSCROLL
+    LTEXT           "Subject:",IDC_STATIC,5,65,29,9
+    EDITTEXT        ID_EDIT_SUBJECT,36,63,239,13,ES_AUTOHSCROLL
+    EDITTEXT        ID_EDIT_NOTETEXT,4,78,271,72,ES_MULTILINE | 
+                    ES_AUTOHSCROLL
+    GROUPBOX        "Attachments",IDC_STATIC,4,153,275,39
+    EDITTEXT        ID_EDIT_ATTACH1,16,162,122,13,ES_AUTOHSCROLL
+    EDITTEXT        ID_EDIT_ATTACH2,16,176,122,13,ES_AUTOHSCROLL
+    EDITTEXT        ID_EDIT_ATTACH3,147,162,122,13,ES_AUTOHSCROLL
+    EDITTEXT        ID_EDIT_ATTACH4,147,175,122,13,ES_AUTOHSCROLL
+    PUSHBUTTON      "MAPISendMail",ID_BUTTON_MAPISENDMAIL,70,204,58,14
+    PUSHBUTTON      "Cancel",IDCANCEL,50,225,84,14
+    PUSHBUTTON      "MAPISendDocuments",ID_BUTTON_MAPISENDDOCUMENTS,132,204,
+                    79,14
+    CONTROL         "Show Dialog",ID_CHECK_SHOWDIALOG,"Button",
+                    BS_AUTOCHECKBOX | WS_TABSTOP,8,207,55,9
+    LTEXT           "cc:",IDC_STATIC,22,32,12,8
+    LTEXT           "bcc:",IDC_STATIC,18,47,15,8
+    GROUPBOX        "Send Operations",IDC_STATIC,4,196,275,26
+    PUSHBUTTON      "MAPISaveMail",ID_BUTTON_MAPISAVEMAIL,215,204,57,14
+    PUSHBUTTON      "MAPIAddress",ID_BUTTON_MAPIADDRESS,150,225,84,14
+END
+
+ID_DIALOG_READMAIL DIALOG DISCARDABLE  0, 0, 269, 266
+STYLE DS_MODALFRAME | WS_POPUP | WS_CAPTION | WS_SYSMENU
+CAPTION "Mail Message"
+FONT 8, "MS Sans Serif"
+BEGIN
+    LTEXT           "Subject:",IDC_STATIC,5,71,27,9
+    EDITTEXT        IDC_EDIT_SUBJECT,36,69,229,12,ES_AUTOHSCROLL | 
+                    ES_READONLY
+    LISTBOX         IDC_LIST_ATTACHMENTS,4,211,261,37,LBS_SORT | 
+                    LBS_NOINTEGRALHEIGHT | WS_VSCROLL | WS_TABSTOP
+    EDITTEXT        IDC_EDIT_BODYTEXT,4,113,261,85,ES_MULTILINE | 
+                    ES_AUTOVSCROLL | ES_AUTOHSCROLL | ES_READONLY | 
+                    ES_WANTRETURN
+    LISTBOX         IDC_LIST_RECIPIENTS,4,29,261,36,LBS_SORT | 
+                    LBS_NOINTEGRALHEIGHT | WS_VSCROLL | WS_TABSTOP
+    LTEXT           "Recipients:",IDC_STATIC,4,19,43,9
+    LTEXT           "Attachments:",IDC_STATIC,4,202,43,9
+    EDITTEXT        IDC_EDIT_DATETIME,36,83,229,12,ES_AUTOHSCROLL | 
+                    ES_READONLY
+    LTEXT           "Date:",IDC_STATIC,13,84,19,9
+    PUSHBUTTON      "OK",ID_OK,114,249,42,13
+    EDITTEXT        IDC_EDIT_THREAD,36,97,229,12,ES_AUTOHSCROLL | 
+                    ES_READONLY
+    LTEXT           "Thread:",IDC_STATIC,6,99,25,9
+    LTEXT           "From:",IDC_STATIC,4,6,19,9
+    EDITTEXT        IDC_EDIT_FROM,27,4,238,12,ES_AUTOHSCROLL | ES_READONLY
+END
+
+
+/////////////////////////////////////////////////////////////////////////////
+//
+// DESIGNINFO
+//
+
+#ifdef APSTUDIO_INVOKED
+GUIDELINES DESIGNINFO DISCARDABLE 
+BEGIN
+    ID_DIALOG, DIALOG
+    BEGIN
+        LEFTMARGIN, 4
+        RIGHTMARGIN, 340
+        VERTGUIDE, 9
+        VERTGUIDE, 309
+        TOPMARGIN, 4
+        BOTTOMMARGIN, 227
+        HORZGUIDE, 206
+    END
+
+    ID_DIALOG_MAIL, DIALOG
+    BEGIN
+        LEFTMARGIN, 4
+        RIGHTMARGIN, 281
+        TOPMARGIN, 4
+        BOTTOMMARGIN, 239
+    END
+
+    ID_DIALOG_READMAIL, DIALOG
+    BEGIN
+        LEFTMARGIN, 4
+        RIGHTMARGIN, 265
+        TOPMARGIN, 4
+        BOTTOMMARGIN, 262
+    END
+END
+#endif    // APSTUDIO_INVOKED
+
+
+#ifdef APSTUDIO_INVOKED
+/////////////////////////////////////////////////////////////////////////////
+//
+// TEXTINCLUDE
+//
+
+1 TEXTINCLUDE DISCARDABLE 
+BEGIN
+    "resource.h\0"
+END
+
+2 TEXTINCLUDE DISCARDABLE 
+BEGIN
+    "#include ""afxres.h""\r\n"
+    "\0"
+END
+
+3 TEXTINCLUDE DISCARDABLE 
+BEGIN
+    "\r\n"
+    "\0"
+END
+
+#endif    // APSTUDIO_INVOKED
+
+
+/////////////////////////////////////////////////////////////////////////////
+//
+// Icon
+//
+
+// Icon with lowest ID value placed first to ensure application icon
+// remains consistent on all systems.
+ID_ICON_APP             ICON    DISCARDABLE     "nscicon.ico"
+
+/////////////////////////////////////////////////////////////////////////////
+//
+// Menu
+//
+
+ID_MENU MENU DISCARDABLE 
+BEGIN
+    POPUP "&File"
+    BEGIN
+        MENUITEM "MAPI&FindNext",               ID_MENU_MAPIFINDNEXT
+        MENUITEM "MAPI&ReadMail",               ID_MENU_MAPIREADMAIL
+        MENUITEM SEPARATOR
+        MENUITEM "E&xit",                       ID_MENU_MYEXIT
+    END
+    POPUP "&Edit"
+    BEGIN
+        MENUITEM "MAPI&DeleteMail",             ID_MENU_MAPIDELETEMAIL
+        MENUITEM "&Clear Results",              ID_MENU_CLEARRESULTS
+    END
+    POPUP "&Help"
+    BEGIN
+        MENUITEM "&About...",                   ID_MENU_MYABOUT
+    END
+END
+
+#endif    // English (U.S.) resources
+/////////////////////////////////////////////////////////////////////////////
+
+
+
+#ifndef APSTUDIO_INVOKED
+/////////////////////////////////////////////////////////////////////////////
+//
+// Generated from the TEXTINCLUDE 3 resource.
+//
+
+
+/////////////////////////////////////////////////////////////////////////////
+#endif    // not APSTUDIO_INVOKED
+

mozilla/mailnews/mapi/old/tests/mapitest/port.h

@@ -0,0 +1,303 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+
+#ifndef PORT_H
+#define PORT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*****************************************************************\
+ *                                                               *
+ *  PORT.H                                                       *
+ *                                                               *
+ *  Win16/Win32 portability stuff                                *
+ *                                                               *
+ *  A.Sokolsky                                                   *
+ *      3.10.94 distilled into this header                       *
+ *                                                               *
+\*****************************************************************/
+
+/*
+ * calling conventions
+ */
+#include <assert.h>
+                                                      
+                                                      
+#ifndef CDECL
+#define CDECL __cdecl
+#endif  // CDECL
+
+#ifndef PASCAL
+#define PASCAL __pascal
+#endif  // PASCAL
+
+#ifdef FASTCALL
+#error FASTCALL defined
+#endif // FASTCALL
+
+
+#ifdef NDEBUG
+#define FASTCALL __fastcall
+#else
+#define FASTCALL PASCAL
+#endif // NDEBUG   
+
+
+
+#ifndef HWND2DWORD
+#  ifdef WIN32
+#    define HWND2DWORD(X_hWnd) ( (DWORD)(X_hWnd) )
+#  else // WIN16
+#    define HWND2DWORD(X_hWnd) ( (DWORD)MAKELONG(((WORD)(X_hWnd)), 0) )
+#  endif
+#endif // HWND2DWORD
+
+
+/*
+ * WIN16 - WIN32 compatibility stuff
+ */
+
+#ifdef WIN32
+
+# define DLLEXPORT    __declspec( dllexport )
+# define EXPORT
+# define LOADDS
+# define HUGE
+# ifndef FAR
+#  define FAR
+# endif // FAR
+# ifndef NEAR
+#  define NEAR
+# endif // NEAR 
+# ifdef UNICODE
+#  define SIZEOF(x)   (sizeof(x)/sizeof(WCHAR))
+# else
+#  define SIZEOF(x)   sizeof(x)
+# endif
+
+#else  // !WIN32 == WIN16
+
+# define DLLEXPORT    
+# define EXPORT       __export
+# define LOADDS       __loadds
+# define HUGE         __huge
+# ifndef FAR
+#   define FAR        __far
+#   define NEAR       __near
+# endif  // FAR
+# define CONST const
+# define SIZEOF(x)    sizeof(x)
+# define CHAR char
+# define TCHAR char
+# define WCHAR char
+# ifndef LPTSTR
+#   define LPTSTR LPSTR
+# endif
+# ifndef LPCTSTR 
+#   define LPCTSTR LPCSTR
+# endif
+# define UNREFERENCED_PARAMETER(x) x;
+# ifndef TEXT
+#   define TEXT(x) x
+# endif
+# define GetWindowTextW GetWindowText
+# define lstrcpyW lstrcpy   
+
+# define BN_DBLCLK BN_DOUBLECLICKED // ~~MRJ needed for custom control.
+// ~~MRJ begin Win95 backward compat section
+# define LPWSTR LPSTR
+# define LPCWSTR LPCSTR
+
+// button check state for WIN16
+#ifndef BST_UNCHECKED
+#define BST_UNCHECKED      0x0000
+#endif
+
+#ifndef BST_CHECKED
+#define BST_CHECKED        0x0001
+#endif
+
+
+#ifndef WIN95_COMPAT
+#  define WIN95_COMPAT
+#endif
+
+// ~~MRJ end Win95 compat section.
+
+// critical section API stubs
+typedef DWORD CRITICAL_SECTION;
+typedef CRITICAL_SECTION FAR * LPCRITICAL_SECTION; 
+#ifdef __cplusplus
+inline void InitializeCriticalSection(LPCRITICAL_SECTION lpSection) {}
+inline void DeleteCriticalSection(LPCRITICAL_SECTION lpSection) {}
+inline void EnterCriticalSection(LPCRITICAL_SECTION lpSection) {}
+inline void LeaveCriticalSection(LPCRITICAL_SECTION lpSection) {} 
+#endif // __cplusplus 
+
+// Added for nssock16 ---Neeti
+#ifndef ZeroMemory
+#include <memory.h>
+#define ZeroMemory(PTR, SIZE) memset(PTR, 0, SIZE)
+#endif // ZeroMemory
+
+#endif // WIN16
+
+/*
+ * unix - windows compatibility stuff
+ */
+typedef DWORD u_int32;
+typedef WORD  u_int16;
+typedef BYTE  u_int8;
+#ifdef WIN32
+typedef short int Bool16;
+#else  // WIN16
+typedef BOOL  Bool16;
+#endif // WIN16
+
+/*
+ * Cross Platform Compatibility
+ */
+#ifndef UNALIGNED
+# ifdef _M_ALPHA
+#  define UNALIGNED __unaligned
+# else  // !_M_ALPHA
+#  define UNALIGNED
+# endif // !_M_ALPHA
+#endif  // UNALIGNED
+
+//
+// RICHIE - for the Alpha port
+//
+#ifdef _M_ALPHA
+# undef pascal
+# undef PASCAL
+# if (_MSC_VER >= 800) || defined(_STDCALL_SUPPORTED)
+#  define pascal __stdcall
+#  define PASCAL __stdcall
+# else
+#  define PASCAL
+# endif
+#endif
+
+
+/*
+ * Useful Types
+ */
+typedef char HUGE *HPSTR;
+typedef const char HUGE *HPCSTR;
+typedef unsigned char HUGE *HPBYTE;
+typedef WORD HUGE *HPWORD;
+typedef UINT FAR *LPUINT;
+typedef BOOL (CALLBACK *USERABORTPROC)();
+typedef BOOL (CALLBACK *PROGRESSPROC)(UINT uPos, UINT uRange);
+typedef int INT;   // ~~MRJ a function needed this defined.
+typedef MINMAXINFO FAR *LPMINMAXINFO; // ~~MRJ 
+
+//
+// stuff missing from windows.h
+//
+#ifndef MAKEWORD
+#define MAKEWORD(low, high)    ((WORD)(((BYTE)(low)) | (((WORD)((BYTE)(high))) << 8)))
+#endif // MAKEWORD
+
+#ifdef WIN32
+# ifndef hmemcpy
+#  define hmemcpy memcpy
+# endif // !defined(hmemcpy)
+# define _fmemset memset
+
+# include <malloc.h>
+
+#ifdef __cplusplus
+
+inline BOOL IsGDIObject(HGDIOBJ hObj) { return (hObj != 0); }
+inline void *_halloc(long num, unsigned int size) { return malloc(num * size); }
+inline void _hfree( void *memblock ) { free(memblock); } 
+/*
+inline BOOL IsInstance(HINSTANCE hInst) {
+# ifdef WIN32
+    return (hInst != 0);
+# else // WIN16
+    return (hInst > HINSTANCE_ERROR);
+# endif  
+}  
+*/
+
+#endif // __cplusplus
+
+  WINUSERAPI HANDLE WINAPI LoadImageA(HINSTANCE, LPCSTR, UINT, int, int, UINT);
+
+#endif // WIN32
+
+#ifdef __cplusplus 
+inline BOOL IsInstance(HINSTANCE hInst) {
+# ifdef WIN32
+    return (hInst != 0);
+# else // WIN16
+    return (hInst > HINSTANCE_ERROR);
+# endif  
+} 
+inline void SetWindowSmallIcon(HINSTANCE hInst, HWND hWnd, UINT uIconResourceId) {
+#ifdef WIN32
+# ifndef WM_SETICON
+#   define WM_SETICON 0x0080
+# endif  // WM_SETICON
+# ifndef IMAGE_ICON
+#   define IMAGE_ICON 1
+# endif
+  assert(IsWindow(hWnd));
+  HICON hIcon = (HICON)LoadImageA(hInst, MAKEINTRESOURCE(uIconResourceId), IMAGE_ICON,
+    16, 16, 0);
+  if(NULL != hIcon) {
+    SendMessage(hWnd, WM_SETICON, FALSE, (LPARAM)hIcon);
+  } else {
+    HICON hIcon = LoadIcon(hInst, MAKEINTRESOURCE(uIconResourceId));
+    assert(hIcon != 0);
+    SendMessage(hWnd, WM_SETICON, FALSE, (LPARAM)hIcon);
+  }
+#endif // WIN32
+}
+#endif // __cplusplus
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* PORT_H */

mozilla/mailnews/mapi/old/tests/mapitest/readmail.cpp

@@ -0,0 +1,137 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: NPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is 
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or 
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the NPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the NPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+//
+#include <windows.h>
+#include <windowsx.h>
+
+#ifndef MAPI_OLE	// Because MSFT doesn't do this for us :-(
+#include <mapi.h>
+#endif
+
+#include "port.h"
+#include "resource.h"
+
+//
+// Variables...
+// 
+extern HINSTANCE   hInst;
+extern HINSTANCE   m_hInstMapi;
+extern LHANDLE     mapiSession;
+
+// 
+// Forward declarations...
+//
+extern void   ShowMessage(HWND hWnd, LPSTR msg);
+extern void   SetFooter(LPSTR msg);
+extern LPSTR  GetMAPIError(LONG errorCode);
+lpMapiMessage mailPtr = NULL;
+
+void 
+ProcessReadMailCommand(HWND hWnd, int id, HWND hCtl, UINT codeNotify) 
+{ 
+  switch (id) 
+  {
+  case ID_OK:
+  case IDCANCEL:
+    EndDialog(hWnd, 0);
+    break;
+
+  default:
+    break;
+  }
+}
+
+BOOL CALLBACK LOADDS 
+ReadMailDlgProc(HWND hWndMail, UINT wMsg, WPARAM wParam, LPARAM lParam) 
+{
+  switch (wMsg) 
+  {
+  case WM_INITDIALOG: 
+    {
+      DWORD i;
+      // Do everything we need to display the message pointed to by
+      // mailPtr
+      if (!mailPtr)
+        break;
+
+      // Start with the basics...
+      SetDlgItemText(hWndMail, IDC_EDIT_SUBJECT, mailPtr->lpszSubject);
+      SetDlgItemText(hWndMail, IDC_EDIT_DATETIME, mailPtr->lpszDateReceived);
+      SetDlgItemText(hWndMail, IDC_EDIT_THREAD, mailPtr->lpszConversationID);
+      SetDlgItemText(hWndMail, IDC_EDIT_BODYTEXT, mailPtr->lpszNoteText);
+
+      char    buf[1024];
+      wsprintf(buf, "%s (%s)", mailPtr->lpOriginator->lpszName, 
+                              mailPtr->lpOriginator->lpszAddress);
+      SetDlgItemText(hWndMail, IDC_EDIT_FROM, buf);
+
+      for (i=0; i<mailPtr->nRecipCount; i++)
+      {
+          wsprintf(buf, "%s (%s)", mailPtr->lpRecips[i].lpszName, 
+                                   mailPtr->lpRecips[i].lpszAddress);
+          ListBox_InsertString(GetDlgItem(hWndMail, IDC_LIST_RECIPIENTS), 
+                  ListBox_GetCount(GetDlgItem(hWndMail, IDC_LIST_RECIPIENTS)), 
+                  buf);
+      }
+
+      for (i=0; i<mailPtr->nFileCount; i++)
+      {
+          ListBox_InsertString(GetDlgItem(hWndMail, IDC_LIST_ATTACHMENTS), 
+                ListBox_GetCount(GetDlgItem(hWndMail, IDC_LIST_ATTACHMENTS)), 
+                mailPtr->lpFiles[i].lpszPathName);
+      }
+    }
+    break;
+
+  case WM_COMMAND:
+    HANDLE_WM_COMMAND(hWndMail, wParam, lParam, ProcessReadMailCommand);
+    break;
+
+  default:
+    return FALSE;
+  }
+  
+  return TRUE;
+}
+
+void
+DisplayMAPIReadMail(HWND hWnd, lpMapiMessage msgPtr)
+{
+  mailPtr = msgPtr;
+  DialogBox(hInst, MAKEINTRESOURCE(ID_DIALOG_READMAIL), hWnd, 
+                (DLGPROC)ReadMailDlgProc);
+}

mozilla/mailnews/mapi/old/tests/mapitest/resource.h

@@ -0,0 +1,108 @@
+//{{NO_DEPENDENCIES}}
+// Microsoft Developer Studio generated include file.
+// Used by mtest32.rc
+//
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+#define ID_GUI_MESSAGE1                 1
+#define ID_BUTTON_MAPIADDRESS           3
+#define ID_DIALOG                       101
+#define ID_ICON_APP                     102
+#define ID_MENU                         104
+#define ID_DIALOG_MAIL                  105
+#define ID_DIALOG_READMAIL              106
+#define ID_SETFROMEDIT                  1000
+#define ID_SETTEXT                      1001
+#define ID_GETROWS                      1001
+#define ID_EDIT                         1002
+#define ID_EDIT_HWND                    1002
+#define ID_RESOURCETEXT                 1003
+#define ID_GETTEXT                      1003
+#define ID_STATIC_RESULT                1004
+#define ID_GETVISROWS                   1005
+#define ID_GETWINID                     1006
+#define ID_SETROWFOCUS                  1007
+#define ID_GETROWFOCUS                  1008
+#define ID_EDIT_ROW                     1009
+#define ID_LIST_RESULT                  1010
+#define ID_GETCOLCOUNT                  1011
+#define ID_BUTTON_LOGON                 1011
+#define ID_SETROWINVIEW                 1012
+#define ID_BUTTON_LOGOFF                1012
+#define ID_GETNUMCHILDREN               1013
+#define ID_EDIT_USERNAME                1013
+#define ID_CLEARRESULTS                 1014
+#define ID_EDIT_PW                      1014
+#define ID_BUTTON_FINDNEXT              1015
+#define ID_BUTTON_CLEAR                 1016
+#define ID_BUTTON_READMAIL              1017
+#define ID_BUTTON_DELETEMAIL            1018
+#define IDC_EDIT_RESOLVENAME            1019
+#define ID_BUTTON_MAPISENDMAIL          1020
+#define ID_BUTTON_NSCPVERSION           1020
+#define ID_BUTTON_RESOLVENAME           1021
+#define ID_BUTTON_MAPISENDDOCUMENTS     1021
+#define ID_EDIT_TOADDRESS               1022
+#define ID_EDIT_CCADDRESS               1023
+#define ID_BUTTON_DETAILS               1024
+#define ID_EDIT_BCCADDRESS              1024
+#define ID_EDIT_SUBJECT                 1025
+#define ID_BUTTON_MAIL                  1025
+#define ID_BUTTON_FREEBUFFER            1026
+#define ID_EDIT_NOTETEXT                1026
+#define ID_EDIT_ATTACH1                 1027
+#define ID_BUTTON_SYNC                  1027
+#define ID_EDIT_ATTACH2                 1028
+#define IDC_CHECK_BODYASFILE            1028
+#define ID_EDIT_ATTACH3                 1029
+#define IDC_CHECK_ENVELOPEONLY          1029
+#define IDC_LIST_ATTACHMENTS            1029
+#define ID_EDIT_ATTACH4                 1030
+#define IDC_CHECK_PEEK                  1030
+#define IDC_EDIT_BODYTEXT               1030
+#define IDC_CHECK_SUPPRESSATTACH        1031
+#define IDC_LIST_RECIPIENTS             1031
+#define ID_BUTTON_MAPISAVEMAIL          1031
+#define IDC_EDIT_SUBJECT                1032
+#define IDC_EDIT_DATETIME               1033
+#define ID_OK                           1034
+#define IDC_EDIT_THREAD                 1035
+#define ID_CHECK_SHOWDIALOG             1035
+#define IDC_EDIT_FROM                   1036
+#define ID_MENU_MYEXIT                  30001
+#define ID_MENU_CLEAR                   30002
+#define ID_MENU_MYABOUT                 30003
+#define ID_MENU_CLEARRESULTS            30004
+#define ID_MENU_MAPIDELETEMAIL          30005
+#define ID_MENU_MAPIFINDNEXT            30006
+#define ID_MENU_MAPIREADMAIL            30007
+
+// Next default values for new objects
+// 
+#ifdef APSTUDIO_INVOKED
+#ifndef APSTUDIO_READONLY_SYMBOLS
+#define _APS_NEXT_RESOURCE_VALUE        107
+#define _APS_NEXT_COMMAND_VALUE         30008
+#define _APS_NEXT_CONTROL_VALUE         1036
+#define _APS_NEXT_SYMED_VALUE           101
+#endif
+#endif

mozilla/mailnews/mapi/resources/content/contents.rdf

@@ -0,0 +1,117 @@
+<?xml version="1.0"?>
+
+<!-- If you modify this file, please also update the following files -->
+<!-- mailnews/mapi/resources/content/contents.rdf in the ns tree -->
+
+<RDF:RDF xmlns:RDF="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+         xmlns:chrome="http://www.mozilla.org/rdf/chrome#">
+
+  <!-- list all the packages being supplied by this jar -->
+  <RDF:Seq about="urn:mozilla:package:root">
+    <RDF:li resource="urn:mozilla:package:messenger"/>
+  </RDF:Seq>
+
+  <!-- package information -->
+  <RDF:Description about="urn:mozilla:package:messenger"
+        chrome:displayName="Messenger"
+        chrome:author="mozilla.org"
+        chrome:name="messenger"
+	chrome:localeVersion="0.9.4"
+		chrome:skinVersion="0.9.4">
+  </RDF:Description>
+
+  <!-- overlay information -->
+  <RDF:Seq about="urn:mozilla:overlays">
+    <RDF:li resource="chrome://communicator/content/pref/preftree.xul"/>
+    <RDF:li resource="chrome://communicator/content/pref/pref-appearance.xul"/>
+    <RDF:li resource="chrome://communicator/content/pref/pref-advanced.xul"/>
+    <RDF:li resource="chrome://communicator/content/tasksOverlay.xul"/>
+    <RDF:li resource="chrome://navigator/content/navigatorOverlay.xul"/>
+    <RDF:li resource="chrome://communicator/content/history/history.xul"/>
+    <RDF:li resource="chrome://communicator/content/bookmarks/bookmarks.xul"/>
+    <RDF:li resource="chrome://communicator/content/bookmarks/bm-find.xul"/>
+    <RDF:li resource="chrome://messenger/content/messenger.xul"/>
+    <RDF:li resource="chrome://messenger/content/mail3PaneWindowVertLayout.xul"/>
+    <RDF:li resource="chrome://messenger/content/messengercompose/messengercompose.xul"/>
+    <RDF:li resource="chrome://messenger/content/addressbook/addressbook.xul"/>
+    <RDF:li resource="chrome://messenger/content/addressbook/abSelectAddressesDialog.xul"/>
+    <RDF:li resource="chrome://editor/content/editor.xul"/>
+    <RDF:li resource="chrome://messenger/content/pref-mailnews.xul"/>
+  </RDF:Seq>
+
+
+  <!-- messenger preferences branches -->
+  <RDF:Seq about="chrome://communicator/content/pref/preftree.xul">
+    <RDF:li>chrome://messenger/content/mailPrefsOverlay.xul</RDF:li>
+  </RDF:Seq>
+
+  <!-- messenger startup pref -->
+  <RDF:Seq about="chrome://communicator/content/pref/pref-appearance.xul">
+    <RDF:li>chrome://messenger/content/mailPrefsOverlay.xul</RDF:li>
+  </RDF:Seq>
+
+  <!-- messenger js toggle pref -->
+  <RDF:Seq about="chrome://communicator/content/pref/pref-advanced.xul">
+    <RDF:li>chrome://messenger/content/mailPrefsOverlay.xul</RDF:li>
+  </RDF:Seq>
+
+  <!-- messenger taskbar/tasks menu items -->
+  <RDF:Seq about="chrome://communicator/content/tasksOverlay.xul">
+    <RDF:li>chrome://messenger/content/mailTasksOverlay.xul</RDF:li>
+  </RDF:Seq>
+
+  <!-- messenger items for History -->
+  <RDF:Seq about="chrome://communicator/content/history/history.xul">
+    <RDF:li>chrome://messenger/content/mailNavigatorOverlay.xul</RDF:li>
+  </RDF:Seq>
+
+  <!-- messenger items for Bookmarks -->
+  <RDF:Seq about="chrome://communicator/content/bookmarks/bookmarks.xul">
+    <RDF:li>chrome://messenger/content/mailNavigatorOverlay.xul</RDF:li>
+  </RDF:Seq>
+
+  <!-- messenger items for History -->
+  <RDF:Seq about="chrome://communicator/content/bookmarks/bm-find.xul">
+    <RDF:li>chrome://messenger/content/mailNavigatorOverlay.xul</RDF:li>
+  </RDF:Seq>
+
+  <!-- messenger items for Navigator -->
+  <RDF:Seq about="chrome://navigator/content/navigatorOverlay.xul">
+    <RDF:li>chrome://messenger/content/mailNavigatorOverlay.xul</RDF:li>
+  </RDF:Seq>
+
+  <!-- messenger items for Messenger -->
+  <RDF:Seq about="chrome://messenger/content/messenger.xul">
+    <RDF:li>chrome://messenger/content/mailMessengerOverlay.xul</RDF:li>
+  </RDF:Seq>
+  <RDF:Seq about="chrome://messenger/content/mail3PaneWindowVertLayout.xul">
+    <RDF:li>chrome://messenger/content/mailMessengerOverlay.xul</RDF:li>
+  </RDF:Seq>
+
+  <!-- messenger items for Mail Compose -->
+  <RDF:Seq about="chrome://messenger/content/messengercompose/messengercompose.xul">
+    <RDF:li>chrome://messenger/content/mailMessengerComposeOverlay.xul</RDF:li>
+  </RDF:Seq>
+  
+  <!-- messenger items for Addressbook -->
+  <RDF:Seq about="chrome://messenger/content/addressbook/addressbook.xul">
+    <RDF:li>chrome://messenger/content/mailABOverlay.xul</RDF:li>
+  </RDF:Seq>
+  
+  <!-- messenger items for Select Addresses dialog -->
+  <RDF:Seq about="chrome://messenger/content/addressbook/abSelectAddressesDialog.xul">
+    <RDF:li>chrome://messenger/content/mailOverlay.xul</RDF:li>
+  </RDF:Seq>
+
+
+  <!-- messenger items for Composer -->
+  <RDF:Seq about="chrome://editor/content/editor.xul">
+    <RDF:li>chrome://messenger/content/mailEditorOverlay.xul</RDF:li>
+  </RDF:Seq>
+  
+  <!-- mapi items for Mail And Newsgroups preferences pane -->
+  <RDF:Seq about="chrome://messenger/content/pref-mailnews.xul">
+    <RDF:li>chrome://messenger/content/pref-mailnewsOverlay.xul</RDF:li>
+  </RDF:Seq>
+
+</RDF:RDF>

mozilla/mailnews/mapi/resources/content/jar.mn

@@ -0,0 +1,4 @@
+messenger.jar:
+     content/messenger/pref-mailnewsOverlay.xul
++    content/messenger/contents.rdf 
+     content/messenger/pref-mailnewsOverlay.js

mozilla/mailnews/mapi/resources/content/makefile.win

@@ -0,0 +1,26 @@
+#!nmake
+# 
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+# 
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+# 
+# The Original Code is mozilla.org code.
+# 
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are 
+# Copyright (C) 2001 Netscape Communications Corporation.  All
+# Rights Reserved.
+# 
+# Contributor(s): 
+# Srilatha Moturi <srilatha@netscape.com>
+#
+
+DEPTH=..\..\..\..
+
+include <$(DEPTH)\config\rules.mak>

mozilla/mailnews/mapi/resources/content/overlays.rdf

@@ -0,0 +1,14 @@
+<?xml version="1.0"?>
+<RDF:RDF xmlns:chrome="http://www.mozilla.org/rdf/chrome#"
+         xmlns:RDF="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
+
+   <!-- mapi items for mailnews preferences -->
+   <RDF:Seq about="urn:mozilla:overlays">
+     <RDF:li resource="chrome://messenger/content/pref-mailnews.xul"/>
+   </RDF:Seq>
+
+   <RDF:Seq about="chrome://messenger/content/pref-mailnews.xul">
+     <RDF:li>chrome://messenger/content/pref-mailnewsOverlay.xul</RDF:li>
+   </RDF:Seq>
+
+</RDF:RDF>

mozilla/mailnews/mapi/resources/content/pref-mailnewsOverlay.js

@@ -0,0 +1,104 @@
+/* 
+ * The contents of this file are subject to the Mozilla Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/MPL/
+ * 
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ * 
+ * The Original Code is mozilla.org code.
+ * 
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are 
+ * Copyright (C) 2001 Netscape Communications Corporation.  All
+ * Rights Reserved.
+ * 
+ * Contributor(s): 
+ * Srilatha Moturi <srilatha@netscape.com>
+ */
+
+function mailnewsOverlayStartup() {
+    mailnewsOverlayInit();
+    parent.hPrefWindow.registerOKCallbackFunc(onOK);
+    if (!("mapiPref" in parent)) {
+        parent.mapiPref = new Object;
+        parent.mapiPref.isDefaultMailClient = 
+               document.getElementById("mailnewsEnableMapi").checked;
+    }
+    else { 
+        // when we switch between different panes
+        // set the checkbox based on the saved state
+        var mailnewsEnableMapi = document.getElementById("mailnewsEnableMapi");
+        if (parent.mapiPref.isDefaultMailClient)
+            mailnewsEnableMapi.setAttribute("checked", "true");
+        else
+            mailnewsEnableMapi.setAttribute("checked", "false");
+    }
+}
+
+function mailnewsOverlayInit() {
+    try {
+        var mapiRegistry = Components.classes[ "@mozilla.org/mapiregistry;1" ].
+                   getService( Components.interfaces.nsIMapiRegistry );
+    }
+    catch(ex){
+        mapiRegistry = null;
+    }
+
+    const prefbase = "system.windows.lock_ui.";
+    var mailnewsEnableMapi = document.getElementById("mailnewsEnableMapi");
+    if (mapiRegistry) {
+    // initialise preference component.
+    // While the data is coming from the system registry, we use a set
+    // of parallel preferences to indicate if the ui should be locked.
+        try { 
+            var prefService = Components.classes["@mozilla.org/preferences-service;1"]
+                          .getService()
+                          .QueryInterface(Components.interfaces.nsIPrefService);
+            var prefBranch = prefService.getBranch(prefbase);
+            if (prefBranch && prefBranch.prefIsLocked("default_mail_client")) {
+                if (prefBranch.getBoolPref("default_mail_client"))
+                    mapiRegistry.setDefaultMailClient();
+                else
+                    mapiRegistry.unsetDefaultMailClient();
+                mailnewsEnableMapi.setAttribute("disabled", "true");
+           }
+        }
+        catch(ex) {}
+        if (mapiRegistry.isDefaultMailClient)
+            mailnewsEnableMapi.setAttribute("checked", "true");
+        else
+            mailnewsEnableMapi.setAttribute("checked", "false");
+    }
+    else
+        mailnewsEnableMapi.setAttribute("disabled", "true");
+}
+
+function onEnableMapi() {
+    // save the state of the checkbox
+    if ("mapiPref" in parent)
+        parent.mapiPref.isDefaultMailClient = 
+               document.getElementById("mailnewsEnableMapi").checked;
+}
+
+function onOK()
+{
+    try {
+        var mapiRegistry = Components.classes[ "@mozilla.org/mapiregistry;1" ].
+                   getService( Components.interfaces.nsIMapiRegistry );
+    }
+    catch(ex){
+        mapiRegistry = null;
+    }
+    if (mapiRegistry &&
+        ("mapiPref" in parent) && 
+        (mapiRegistry.isDefaultMailClient != parent.mapiPref.isDefaultMailClient)) { 
+        if (parent.mapiPref.isDefaultMailClient)
+            mapiRegistry.setDefaultMailClient();
+        else
+            mapiRegistry.unsetDefaultMailClient();
+    }
+}

mozilla/mailnews/mapi/resources/content/pref-mailnewsOverlay.xul

@@ -0,0 +1,44 @@
+<?xml version="1.0"?>
+<!-- 
+The contents of this file are subject to the Mozilla Public
+License Version 1.1 (the "License"); you may not use this file
+except in compliance with the License. You may obtain a copy of
+the License at http://www.mozilla.org/MPL/
+
+oftware distributed under the License is distributed on an "AS
+IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+implied. See the License for the specific language governing
+rights and limitations under the License.
+
+The Original Code is mozilla.org code.
+The Initial Developer of the Original Code is Netscape
+Communications Corporation.  Portions created by Netscape are 
+Copyright (C) 2001 Netscape Communications Corporation.  All
+Rights Reserved.
+ 
+Contributor(s): 
+  Srilatha Moturi <srilatha@netscape.com>
+-->
+
+<!DOCTYPE window [
+<!ENTITY % brandDTD SYSTEM "chrome://global/locale/brand.dtd" >
+%brandDTD;
+<!ENTITY % prefMailnewsOverlayDTD SYSTEM "chrome://messenger/locale/pref-mailnewsOverlay.dtd" >
+%prefMailnewsOverlayDTD;
+]>
+<overlay id="prefMailnewsOverlay"
+         xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul">
+
+<script type="application/x-javascript">
+  <![CDATA[
+      _elementIDs.push("mailnewsEnableMapi");
+  ]]>
+</script>         
+<script type="application/x-javascript" src="chrome://messenger/content/pref-mailnewsOverlay.js"/>
+<hbox autostretch="never" id="mapi">
+  <checkbox id="mailnewsEnableMapi" label="&enableMapi.label;"
+            accesskey="&enableMapi.accesskey;"
+            oncommand="onEnableMapi();"
+            startFunc="mailnewsOverlayStartup();"/>
+</hbox>
+</overlay> 

mozilla/mailnews/mapi/resources/locale/en-US/jar.mn

@@ -0,0 +1,3 @@
+en-US.jar:
+     locale/en-US/messenger/pref-mailnewsOverlay.dtd
+     locale/en-US/messenger/mapi.properties

mozilla/mailnews/mapi/resources/locale/en-US/makefile.win

@@ -0,0 +1,26 @@
+#!nmake
+# 
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+# 
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+# 
+# The Original Code is mozilla.org code.
+# 
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are 
+# Copyright (C) 2001 Netscape Communications Corporation.  All
+# Rights Reserved.
+# 
+# Contributor(s): 
+# Srilatha Moturi <srilatha@netscape.com>
+# 
+
+DEPTH=..\..\..\..\..
+
+include <$(DEPTH)\config\rules.mak>

mozilla/mailnews/mapi/resources/locale/en-US/mapi.properties

@@ -0,0 +1,18 @@
+# Mail Integration Dialog
+dialogTitle=%S Mail
+dialogText=Do you want to use %S as the default mail application? 
+checkboxText=Do not display this dialog again
+
+# MAPI Messages
+loginText=Please enter your password for %S:
+loginTextwithName=Please enter your username and password 
+loginTitle=%S Mail
+PasswordTitle=%S Mail
+
+# MAPI Error Messages
+errorMessage=%S Mail could not be set as the default mail application because a registry key could not be updated. Verify with your system administrator that you have write access to your system registry, and then try again.
+errorMessageTitle=%S Mail
+
+# MAPI Security Messages
+mapiBlindSendWarning=Another application is attempting to send mail using your user profile. Are you sure you want to send mail?
+mapiBlindSendDontShowAgain=Warn me whenever other applications try to send mail from me

mozilla/mailnews/mapi/resources/locale/en-US/pref-mailnewsOverlay.dtd

@@ -0,0 +1,3 @@
+<!ENTITY enableMapiTitle.label        "When sending mail from other applications">
+<!ENTITY enableMapi.label             "Use &vendorShortName; Mail as the default mail application.">
+<!ENTITY enableMapi.accesskey         "u">

mozilla/mailnews/mapi/resources/locale/makefile.win

@@ -0,0 +1,28 @@
+#!nmake
+# 
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+# 
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+# 
+# The Original Code is mozilla.org code.
+# 
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are 
+# Copyright (C) 2001 Netscape Communications Corporation.  All
+# Rights Reserved.
+# 
+# Contributor(s): 
+# Srilatha Moturi <srilatha@netscape.com>
+#
+
+DEPTH=..\..\..\..
+
+DIRS=en-US
+
+include <$(DEPTH)\config\rules.mak>

mozilla/mailnews/mapi/resources/makefile.win

@@ -0,0 +1,27 @@
+# 
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+# 
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+# 
+# The Original Code is mozilla.org code.
+# 
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are 
+# Copyright (C) 2001 Netscape Communications Corporation.  All
+# Rights Reserved.
+# 
+# Contributor(s): 
+# Srilatha Moturi <srilatha@netscape.com>
+#
+
+DEPTH=..\..\..
+
+DIRS=content locale
+
+include <$(DEPTH)\config\rules.mak>

mozilla/webtools/bugzilla/Attachment.pm

@@ -1,97 +0,0 @@
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-#                 Myk Melez <myk@mozilla.org>
-
-############################################################################
-# Module Initialization
-############################################################################
-
-use diagnostics;
-use strict;
-
-package Attachment;
-
-# This module requires that its caller have said "require CGI.pl" to import
-# relevant functions from that script and its companion globals.pl.
-
-############################################################################
-# Functions
-############################################################################
-
-sub query
-{
-  # Retrieves and returns an array of attachment records for a given bug. 
-  # This data should be given to attachment/list.atml in an
-  # "attachments" variable.
-  my ($bugid) = @_;
-
-  my $in_editbugs = &::UserInGroup($::userid, "editbugs");
-
-  # Retrieve a list of attachments for this bug and write them into an array
-  # of hashes in which each hash represents a single attachment.
-  &::SendSQL("
-              SELECT attach_id, creation_ts, mimetype, description, ispatch, 
-               isobsolete, submitter_id 
-              FROM attachments WHERE bug_id = $bugid ORDER BY attach_id
-            ");
-  my @attachments = ();
-  while (&::MoreSQLData()) {
-    my %a;
-    my $submitter_id;
-    ($a{'attachid'}, $a{'date'}, $a{'contenttype'}, $a{'description'},
-     $a{'ispatch'}, $a{'isobsolete'}, $submitter_id) = &::FetchSQLData();
-
-    # Format the attachment's creation/modification date into a standard
-    # format (YYYY-MM-DD HH:MM)
-    if ($a{'date'} =~ /^(\d\d\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)$/) {
-        $a{'date'} = "$1-$2-$3 $4:$5";
-    }
-
-    # Retrieve a list of status flags that have been set on the attachment.
-    &::PushGlobalSQLState();
-    &::SendSQL(" 
-                SELECT   name 
-                FROM     attachstatuses, attachstatusdefs 
-                WHERE    attach_id = $a{'attachid'} 
-                AND      attachstatuses.statusid = attachstatusdefs.id
-                ORDER BY sortkey
-              ");
-    my @statuses = ();
-    while (&::MoreSQLData()) { 
-      my ($status) = &::FetchSQLData(); 
-      push @statuses , $status;
-    }
-    $a{'statuses'} = \@statuses;
-    &::PopGlobalSQLState();
-
-    # We will display the edit link if the user can edit the attachment;
-    # ie the are the submitter, or they have canedit.
-    # Also show the link if the user is not logged in - in that cae,
-    # They'll be prompted later
-    $a{'canedit'} = ($::userid == 0 || $submitter_id == $::userid ||
-                     $in_editbugs);
-    push @attachments, \%a;
-  }
-  
-  return \@attachments;  
-}
-
-1;

mozilla/webtools/bugzilla/Bug.pm

@@ -1,504 +0,0 @@
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Dawn Endico    <endico@mozilla.org>
-#                 Terry Weissman <terry@mozilla.org>
-#                 Chris Yeh      <cyeh@bluemartini.com>
-
-use diagnostics;
-use strict;
-
-use DBI;
-use RelationSet;
-use vars qw($unconfirmedstate $legal_keywords);
-require "globals.pl";
-require "CGI.pl";
-package Bug;
-use CGI::Carp qw(fatalsToBrowser);
-my %ok_field;
-
-for my $key (qw (bug_id product version rep_platform op_sys bug_status 
-                resolution priority bug_severity component assigned_to
-                reporter bug_file_loc short_desc target_milestone 
-                qa_contact status_whiteboard creation_ts 
-                delta_ts votes whoid comment query error) ){
-    $ok_field{$key}++;
-    }
-
-# create a new empty bug
-#
-sub new {
-  my $type = shift();
-  my %bug;
-
-  # create a ref to an empty hash and bless it
-  #
-  my $self = {%bug};
-  bless $self, $type;
-
-  # construct from a hash containing a bug's info
-  #
-  if ($#_ == 1) {
-    $self->initBug(@_);
-  } else {
-    confess("invalid number of arguments \($#_\)($_)");
-  }
-
-  # bless as a Bug
-  #
-  return $self;
-}
-
-
-
-# dump info about bug into hash unless user doesn't have permission
-# user_id 0 is used when person is not logged in.
-#
-sub initBug  {
-  my $self = shift();
-  my ($bug_id, $user_id) = (@_);
-
-  my $old_bug_id = $bug_id;
-  if ((! defined $bug_id) || (!$bug_id) || (!&::detaint_natural($bug_id))) {
-      # no bug number given
-      $self->{'bug_id'} = $old_bug_id;
-      $self->{'error'} = "InvalidBugId";
-      return $self;
-  }
-
-# default userid 0, or get DBID if you used an email address
-  unless (defined $user_id) {
-    $user_id = 0;
-  }
-  else {
-     if ($user_id =~ /^\@/) {
-        $user_id = &::DBname_to_id($user_id); 
-     }
-  }
-     
-
-  &::ConnectToDatabase();
-  &::GetVersionTable();
-
-  # this verification should already have been done by caller
-  # my $loginok = quietly_check_login();
-
-
-  $self->{'whoid'} = $user_id;
-
-  # First check that we can see it
-  if (!&::CanSeeBug($bug_id, $user_id)) {
-      # is it not there, or are we just forbidden to see it?
-      &::SendSQL("SELECT bug_id FROM bugs WHERE bug_id = $bug_id");
-      if (&::FetchSQLData()) {
-          $self->{'error'} = "NotPermitted";
-      } else {
-          $self->{'error'} = "NotFound";
-      }
-      $self->{'bug_id'} = $bug_id;
-      return $self;
-  }
-
-  my $query = "
-    select
-      bugs.bug_id, product, version, rep_platform, op_sys, bug_status,
-      resolution, priority, bug_severity, component, assigned_to, reporter,
-      bug_file_loc, short_desc, target_milestone, qa_contact,
-      status_whiteboard, date_format(creation_ts,'%Y-%m-%d %H:%i'),
-      delta_ts, sum(votes.count)
-    from bugs left join votes using(bug_id)
-    where bugs.bug_id = $bug_id
-    group by bugs.bug_id";
-
-  &::SendSQL($query);
-  my @row;
-
-  @row = &::FetchSQLData();
-  my $count = 0;
-  my %fields;
-  foreach my $field ("bug_id", "product", "version", "rep_platform",
-                     "op_sys", "bug_status", "resolution", "priority",
-                     "bug_severity", "component", "assigned_to", "reporter",
-                     "bug_file_loc", "short_desc", "target_milestone",
-                     "qa_contact", "status_whiteboard", "creation_ts",
-                     "delta_ts", "votes") {
-      $fields{$field} = shift @row;
-      if ($fields{$field}) {
-          $self->{$field} = $fields{$field};
-      }
-      $count++;
-  }
-
-  $self->{'assigned_to'} = &::DBID_to_name($self->{'assigned_to'});
-  $self->{'reporter'} = &::DBID_to_name($self->{'reporter'});
-
-  my $ccSet = new RelationSet;
-  $ccSet->mergeFromDB("select who from cc where bug_id=$bug_id");
-  my @cc = $ccSet->toArrayOfStrings();
-  if (@cc) {
-    $self->{'cc'} = \@cc;
-  }
-
-  if (&::Param("useqacontact") && (defined $self->{'qa_contact'}) ) {
-    my $name = $self->{'qa_contact'} > 0 ? &::DBID_to_name($self->{'qa_contact'}) :"";
-    if ($name) {
-      $self->{'qa_contact'} = $name;
-    }
-  }
-
-  if (@::legal_keywords) {
-    &::SendSQL("SELECT keyworddefs.name 
-              FROM keyworddefs, keywords
-             WHERE keywords.bug_id = $bug_id 
-               AND keyworddefs.id = keywords.keywordid
-          ORDER BY keyworddefs.name");
-    my @list;
-    while (&::MoreSQLData()) {
-        push(@list, &::FetchOneColumn());
-    }
-    if (@list) {
-      $self->{'keywords'} = join(', ', @list);
-    }
-  }
-
-  &::SendSQL("select attach_id, creation_ts, description 
-           from attachments 
-           where bug_id = $bug_id");
-  my @attachments;
-  while (&::MoreSQLData()) {
-    my ($attachid, $date, $desc) = (&::FetchSQLData());
-    if ($date =~ /^(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)$/) {
-        $date = "$3/$4/$2 $5:$6";
-      my %attach;
-      $attach{'attachid'} = $attachid;
-      $attach{'date'} = $date;
-      $attach{'desc'} = $desc;
-      push @attachments, \%attach;
-    }
-  }
-  if (@attachments) {
-    $self->{'attachments'} = \@attachments;
-  }
-
-  &::SendSQL("select bug_id, who, bug_when, thetext 
-           from longdescs 
-           where bug_id = $bug_id");
-  my @longdescs;
-  while (&::MoreSQLData()) {
-    my ($bug_id, $who, $bug_when, $thetext) = (&::FetchSQLData());
-    my %longdesc;
-    $longdesc{'who'} = $who;
-    $longdesc{'bug_when'} = $bug_when;
-    $longdesc{'thetext'} = $thetext;
-    push @longdescs, \%longdesc;
-  }
-  if (@longdescs) {
-    $self->{'longdescs'} = \@longdescs;
-  }
-
-  if (&::Param("usedependencies")) {
-    my @depends = EmitDependList("blocked", "dependson", $bug_id);
-    if ( @depends ) {
-      $self->{'dependson'} = \@depends;
-    }
-    my @blocks = EmitDependList("dependson", "blocked", $bug_id);
-    if ( @blocks ) {
-      $self->{'blocks'} = \@blocks;
-    }
-  }
-
-  return $self;
-}
-
-
-
-# given a bug hash, emit xml for it. with file header provided by caller
-#
-sub emitXML {
-  ( $#_ == 0 ) || confess("invalid number of arguments");
-  my $self = shift();
-  my $xml;
-
-
-  if (exists $self->{'error'}) {
-    $xml .= "<bug error=\"$self->{'error'}\">\n";
-    $xml .= "  <bug_id>$self->{'bug_id'}</bug_id>\n";
-    $xml .= "</bug>\n";
-    return $xml;
-  }
-
-  $xml .= "<bug>\n";
-
-  foreach my $field ("bug_id", "bug_status", "product",
-      "priority", "version", "rep_platform", "assigned_to", "delta_ts", 
-      "component", "reporter", "target_milestone", "bug_severity", 
-      "creation_ts", "qa_contact", "op_sys", "resolution", "bug_file_loc",
-      "short_desc", "keywords", "status_whiteboard") {
-    if ($self->{$field}) {
-      $xml .= "  <$field>" . QuoteXMLChars($self->{$field}) . "</$field>\n";
-    }
-  }
-
-  foreach my $field ("dependson", "blocks", "cc") {
-    if (defined $self->{$field}) {
-      for (my $i=0 ; $i < @{$self->{$field}} ; $i++) {
-        $xml .= "  <$field>" . $self->{$field}[$i] . "</$field>\n";
-      }
-    }
-  }
-
-  if (defined $self->{'longdescs'}) {
-    for (my $i=0 ; $i < @{$self->{'longdescs'}} ; $i++) {
-      $xml .= "  <long_desc>\n"; 
-      $xml .= "   <who>" . &::DBID_to_name($self->{'longdescs'}[$i]->{'who'}) 
-                         . "</who>\n"; 
-      $xml .= "   <bug_when>" . $self->{'longdescs'}[$i]->{'bug_when'} 
-                              . "</bug_when>\n"; 
-      $xml .= "   <thetext>" . QuoteXMLChars($self->{'longdescs'}[$i]->{'thetext'})
-                             . "</thetext>\n"; 
-      $xml .= "  </long_desc>\n"; 
-    }
-  }
-
-  if (defined $self->{'attachments'}) {
-    for (my $i=0 ; $i < @{$self->{'attachments'}} ; $i++) {
-      $xml .= "  <attachment>\n"; 
-      $xml .= "    <attachid>" . $self->{'attachments'}[$i]->{'attachid'}
-                              . "</attachid>\n"; 
-      $xml .= "    <date>" . $self->{'attachments'}[$i]->{'date'} . "</date>\n"; 
-      $xml .= "    <desc>" . QuoteXMLChars($self->{'attachments'}[$i]->{'desc'}) . "</desc>\n"; 
-    # $xml .= "    <type>" . $self->{'attachments'}[$i]->{'type'} . "</type>\n"; 
-    # $xml .= "    <data>" . $self->{'attachments'}[$i]->{'data'} . "</data>\n"; 
-      $xml .= "  </attachment>\n"; 
-    }
-  }
-
-  $xml .= "</bug>\n";
-  return $xml;
-}
-
-sub EmitDependList {
-  my ($myfield, $targetfield, $bug_id) = (@_);
-  my @list;
-  &::SendSQL("select dependencies.$targetfield, bugs.bug_status
-           from dependencies, bugs
-           where dependencies.$myfield = $bug_id
-             and bugs.bug_id = dependencies.$targetfield
-           order by dependencies.$targetfield");
-  while (&::MoreSQLData()) {
-    my ($i, $stat) = (&::FetchSQLData());
-    push @list, $i;
-  }
-  return @list;
-}
-
-sub QuoteXMLChars {
-  $_[0] =~ s/&/&amp;/g;
-  $_[0] =~ s/</&lt;/g;
-  $_[0] =~ s/>/&gt;/g;
-  $_[0] =~ s/'/&apos;/g;
-  $_[0] =~ s/"/&quot;/g;
-# $_[0] =~ s/([\x80-\xFF])/&XmlUtf8Encode(ord($1))/ge;
-  return($_[0]);
-}
-
-sub XML_Header {
-  my ($urlbase, $version, $maintainer, $exporter) = (@_);
-
-  my $xml;
-  $xml = "<?xml version=\"1.0\" standalone=\"yes\"?>\n";
-  $xml .= "<!DOCTYPE bugzilla SYSTEM \"$urlbase";
-  if (! ($urlbase =~ /.+\/$/)) {
-    $xml .= "/";
-  }
-  $xml .= "bugzilla.dtd\">\n";
-  $xml .= "<bugzilla";
-  if (defined $exporter) {
-    $xml .= " exporter=\"$exporter\"";
-  }
-  $xml .= " version=\"$version\"";
-  $xml .= " urlbase=\"$urlbase\"";
-  $xml .= " maintainer=\"$maintainer\">\n";
-  return ($xml);
-}
-
-
-sub XML_Footer {
-  return ("</bugzilla>\n");
-}
-
-sub UserInGroup {
-    my $self = shift();
-    my ($groupname) = (@_);
-    return &::UserInGroup($self->{'whoid'}, $groupname);
-}
-
-sub CanChangeField {
-   my $self = shift();
-   my ($f, $oldvalue, $newvalue) = (@_);
-   my $UserInEditGroup = -1;
-   my $UserInCanConfirmGroup = -1;
-   my $ownerid;
-   my $reporterid;
-   my $qacontactid;
-
-    if ($f eq "assigned_to" || $f eq "reporter" || $f eq "qa_contact") {
-        if ($oldvalue =~ /^\d+$/) {
-            if ($oldvalue == 0) {
-                $oldvalue = "";
-            } else {
-                $oldvalue = &::DBID_to_name($oldvalue);
-            }
-        }
-    }
-    if ($oldvalue eq $newvalue) {
-        return 1;
-    }
-    if (&::trim($oldvalue) eq &::trim($newvalue)) {
-        return 1;
-    }
-    if ($f =~ /^longdesc/) {
-        return 1;
-    }
-    if ($UserInEditGroup < 0) {
-        $UserInEditGroup = UserInGroup($self, "editbugs");
-    }
-    if ($UserInEditGroup) {
-        return 1;
-    }
-    &::SendSQL("SELECT reporter, assigned_to, qa_contact FROM bugs " .
-                "WHERE bug_id = $self->{'bug_id'}");
-    ($reporterid, $ownerid, $qacontactid) = (&::FetchSQLData());
-
-    # Let reporter change bug status, even if they can't edit bugs.
-    # If reporter can't re-open their bug they will just file a duplicate.
-    # While we're at it, let them close their own bugs as well.
-    if ( ($f eq "bug_status") && ($self->{'whoid'} eq $reporterid) ) {
-        return 1;
-    }
-    if ($f eq "bug_status" && $newvalue ne $::unconfirmedstate &&
-        &::IsOpenedState($newvalue)) {
-
-        # Hmm.  They are trying to set this bug to some opened state
-        # that isn't the UNCONFIRMED state.  Are they in the right
-        # group?  Or, has it ever been confirmed?  If not, then this
-        # isn't legal.
-
-        if ($UserInCanConfirmGroup < 0) {
-            $UserInCanConfirmGroup = &::UserInGroup($self->{'whoid'},"canconfirm");
-        }
-        if ($UserInCanConfirmGroup) {
-            return 1;
-        }
-        &::SendSQL("SELECT everconfirmed FROM bugs WHERE bug_id = $self->{'bug_id'}");
-        my $everconfirmed = FetchOneColumn();
-        if ($everconfirmed) {
-            return 1;
-        }
-    } elsif ($reporterid eq $self->{'whoid'} || $ownerid eq $self->{'whoid'} ||
-             $qacontactid eq $self->{'whoid'}) {
-        return 1;
-    }
-    $self->{'error'} = "
-Only the owner or submitter of the bug, or a sufficiently
-empowered user, may make that change to the $f field."
-}
-
-sub Collision {
-    my $self = shift();
-    my $write = "WRITE";        # Might want to make a param to control
-                                # whether we do LOW_PRIORITY ...
-    &::SendSQL("LOCK TABLES bugs $write, bugs_activity $write, cc $write, " .
-               "cc AS selectVisible_cc $write, " .
-            "profiles $write, dependencies $write, votes $write, " .
-            "keywords $write, longdescs $write, fielddefs $write, " .
-            "keyworddefs READ, groups READ, attachments READ, products READ");
-    &::SendSQL("SELECT delta_ts FROM bugs where bug_id=$self->{'bug_id'}");
-    my $delta_ts = &::FetchOneColumn();
-    &::SendSQL("unlock tables");
-    if ($self->{'delta_ts'} ne $delta_ts) {
-       return 1;
-    }
-    else {
-       return 0;
-    }
-}
-
-sub AppendComment  {
-    my $self = shift();
-    my ($comment) = (@_);
-    $comment =~ s/\r\n/\n/g;     # Get rid of windows-style line endings.
-    $comment =~ s/\r/\n/g;       # Get rid of mac-style line endings.
-    if ($comment =~ /^\s*$/) {  # Nothin' but whitespace.
-        return;
-    }
-
-    &::SendSQL("INSERT INTO longdescs (bug_id, who, bug_when, thetext) " .
-            "VALUES($self->{'bug_id'}, $self->{'whoid'}, now(), " . &::SqlQuote($comment) . ")");
-
-    &::SendSQL("UPDATE bugs SET delta_ts = now() WHERE bug_id = $self->{'bug_id'}");
-}
-
-
-#from o'reilley's Programming Perl
-sub display {
-    my $self = shift;
-    my @keys;
-    if (@_ == 0) {                  # no further arguments
-        @keys = sort keys(%$self);
-    }  else {
-        @keys = @_;                 # use the ones given
-    }
-    foreach my $key (@keys) {
-        print "\t$key => $self->{$key}\n";
-    }
-}
-
-sub CommitChanges {
-
-#snapshot bug
-#snapshot dependencies
-#check can change fields
-#check collision
-#lock and change fields
-#notify through mail
-
-}
-
-sub AUTOLOAD {
-  use vars qw($AUTOLOAD);
-  my $self = shift;
-  my $type = ref($self) || $self;
-  my $attr = $AUTOLOAD;
-
-  $attr =~ s/.*:://;
-  return unless $attr=~ /[^A-Z]/;
-  if (@_) {
-    $self->{$attr} = shift;
-    return;
-  }
-  confess ("invalid bug attribute $attr") unless $ok_field{$attr};
-  if (defined $self->{$attr}) {
-    return $self->{$attr};
-  } else {
-    return '';
-  }
-}
-
-1;

mozilla/webtools/bugzilla/README

@@ -1,16 +0,0 @@
-* This README is no longer used to house installation instructions.  Instead,
-it contains pointers to where you may find the information you need.
-
-* Installation instructions are now found in docs/, with a variety of document
-types available.  Please refer to these documents when installing, configuring,
-and maintaining your Bugzilla installation.  A helpful starting point is
-docs/txt/Bugzilla-Guide.txt, or with a web browser at docs/html/index.html.
-
-* Release notes for people upgrading to a new version of Bugzilla are
-available at docs/rel_notes.txt.
-
-* If you wish to contribute to the documentation, please read docs/README.docs.
-
-* The Bugzilla web site is at "http://www.mozilla.org/projects/bugzilla/".
-This site will contain the latest Bugzilla information, including how to
-report bugs and how to get help with Bugzilla.

mozilla/webtools/bugzilla/RelationSet.pm

@@ -1,268 +0,0 @@
-# 
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Bugzilla Bug Tracking System.
-# 
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 2000 Netscape Communications Corporation.  All
-# Rights Reserved.
-# 
-# Contributor(s): Dan Mosedale <dmose@mozilla.org>
-#                 Terry Weissman <terry@mozilla.org>
-#                 Dave Miller <justdave@syndicomm.com>
-
-# This object models a set of relations between one item and a group
-# of other items.  An example is the set of relations between one bug
-# and the users CCed on that bug.  Currently, the relation objects are
-# expected to be bugzilla userids.  However, this could and perhaps
-# should be generalized to work with non userid objects, such as
-# keywords associated with a bug.  That shouldn't be hard to do; it
-# might involve turning this into a virtual base class, and having
-# UserSet and KeywordSet types that inherit from it.
-
-use diagnostics;
-use strict;
-
-# Everything that uses RelationSet should already have globals.pl loaded
-# so we don't want to load it here.  Doing so causes a loop in Perl because
-# globals.pl turns around and does a 'use RelationSet'
-# See http://bugzilla.mozilla.org/show_bug.cgi?id=72862
-#require "globals.pl";
-
-package RelationSet;
-use CGI::Carp qw(fatalsToBrowser);
-
-# create a new empty RelationSet
-#
-sub new {
-  my $type = shift();
-
-  # create a ref to an empty hash and bless it
-  #
-  my $self = {};
-  bless $self, $type;
-
-  # construct from a comma-delimited string
-  # 
-  if ($#_ == 0) {
-    $self->mergeFromString($_[0]);
-  }
-  # unless this was a constructor for an empty list, somebody screwed up.
-  #
-  elsif ( $#_ != -1 ) {
-    confess("invalid number of arguments");
-  }
-
-  # bless as a RelationSet
-  #
-  return $self;
-}
-
-# Assumes that the set of relations "FROM $table WHERE $constantSql and 
-# $column = $value" is currently represented by $self, and this set should
-# be updated to look like $other.  
-#
-# Returns an array of two strings, one INSERT and one DELETE, which will
-# make this change.  Either or both strings may be the empty string,
-# meaning that no INSERT or DELETE or both (respectively) need to be done.
-#
-# THE CALLER IS RESPONSIBLE FOR ANY DESIRED LOCKING AND/OR CONSISTENCY 
-# CHECKS (not to mention doing the SendSQL() calls).
-#
-sub generateSqlDeltas {
-  ($#_ == 5) || confess("invalid number of arguments");
-  my ( $self, # instance ptr to set representing the existing state
-       $endState, # instance ptr to set representing the desired state
-       $table, # table where these relations are kept
-       $invariantName, # column held const for a RelationSet (often "bug_id")
-       $invariantValue, # what to hold the above column constant at
-       $columnName # the column which varies (often a userid)
-     ) = @_;
-
-  # construct the insert list by finding relations which exist in the
-  # end state but not the current state.
-  #
-  my @endStateRelations = keys(%$endState);
-  my @insertList = ();
-  foreach ( @endStateRelations ) {
-    push ( @insertList, $_ ) if ( ! exists $$self{"$_"} );
-  }
-
-  # we've built the list.  If it's non-null, add required sql chrome.
-  #
-  my $sqlInsert="";
-  if ( $#insertList > -1 ) {
-    $sqlInsert = "INSERT INTO $table ($invariantName, $columnName) VALUES " .
-      join (",", 
-            map ( "($invariantValue, $_)" , @insertList ) 
-           );
-  }
-     
-  # construct the delete list by seeing which relations exist in the
-  # current state but not the end state
-  #
-  my @selfRelations = keys(%$self);
-  my @deleteList = ();
-  foreach ( @selfRelations ) {
-    push (@deleteList, $_) if ( ! exists $$endState{"$_"} );
-  }
-
-  # we've built the list.  if it's non-empty, add required sql chrome.
-  #
-  my $sqlDelete = "";
-  if ( $#deleteList > -1 ) {
-    $sqlDelete = "DELETE FROM $table WHERE $invariantName = $invariantValue " .
-      "AND $columnName IN ( " . join (",", @deleteList) . " )";
-  } 
-
-  return ($sqlInsert, $sqlDelete);
-}
-
-# compare the current object with another.  
-#
-sub isEqual {
-  ($#_ == 1) || confess("invalid number of arguments");
-  my $self = shift();
-  my $other = shift();
-
-  # get arrays of the keys for faster processing
-  #
-  my @selfRelations = keys(%$self);
-  my @otherRelations = keys(%$other);
- 
-  # make sure the arrays are the same size
-  #
-  return 0 if ( $#selfRelations != $#otherRelations );
-
-  # bail out if any of the elements are different
-  #
-  foreach my $relation ( @selfRelations ) {
-    return 0 if ( !exists $$other{$relation})
-  }
-
-  # we made it!
-  #
-  return 1;
-
-}
-
-# merge the results of a SQL command into this set
-#
-sub mergeFromDB {
-  ( $#_ == 1 ) || confess("invalid number of arguments");
-  my $self = shift();
-
-  &::SendSQL(shift());
-  while (my @row = &::FetchSQLData()) {
-    $$self{$row[0]} = 1;
-  }
-
-  return;
-}
-
-# merge a set in string form into this set
-#
-sub mergeFromString {
-  ($#_ == 1) || confess("invalid number of arguments");
-  my $self = shift();
-
-  # do the merge
-  #
-  foreach my $person (split(/[ ,]/, shift())) {
-    if ($person ne "") {
-      $$self{&::DBNameToIdAndCheck($person)} = 1;
-    }
-  }
-}
-
-# remove a set in string form from this set
-#
-sub removeItemsInString {
-  ($#_ == 1) || confess("invalid number of arguments");
-  my $self = shift();
-
-  # do the merge
-  #
-  foreach my $person (split(/[ ,]/, shift())) {
-    if ($person ne "") {
-      my $dbid = &::DBNameToIdAndCheck($person);
-      if (exists $$self{$dbid}) {
-        delete $$self{$dbid};
-      }
-    }
-  }
-}
-
-# remove a set in array form from this set
-#
-sub removeItemsInArray {
-  ($#_ > 0) || confess("invalid number of arguments");
-  my $self = shift();
-
-  # do the merge
-  #
-  while (my $person = shift()) {
-    if ($person ne "") {
-      my $dbid = &::DBNameToIdAndCheck($person);
-      if (exists $$self{$dbid}) {
-        delete $$self{$dbid};
-      }
-    }
-  }
-}
-
-# return the number of elements in this set
-#
-sub size {
-  my $self = shift();
-
-  my @k = keys(%$self);
-  return $#k++;
-}
-
-# return this set in array form
-#
-sub toArray {
-  my $self= shift();
-
-  return keys(%$self);
-}
-
-# return this set as an array of strings
-#
-sub toArrayOfStrings {
-  ($#_ == 0) || confess("invalid number of arguments");
-  my $self = shift();
-
-  my @result = ();
-  foreach my $i ( keys %$self ) {
-    push @result, &::DBID_to_name($i);
-  }
-
-  return sort { lc($a) cmp lc($b) } @result;
-}  
-
-# return this set in string form (comma-separated and sorted)
-#
-sub toString {
-  ($#_ == 0) || confess("invalid number of arguments");
-  my $self = shift();
-
-  my @result = ();
-  foreach my $i ( keys %$self ) {
-    push @result, &::DBID_to_name($i);
-  }
-
-  return join(',', sort(@result));
-}  
-
-1;

mozilla/webtools/bugzilla/Token.pm

@@ -1,270 +0,0 @@
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s):    Myk Melez <myk@mozilla.org>
-
-################################################################################
-# Module Initialization
-################################################################################
-
-# Make it harder for us to do dangerous things in Perl.
-use diagnostics;
-use strict;
-
-# Bundle the functions in this file together into the "Token" package.
-package Token;
-
-use Date::Format;
-
-# This module requires that its caller have said "require CGI.pl" to import
-# relevant functions from that script and its companion globals.pl.
-
-################################################################################
-# Constants
-################################################################################
-
-# The maximum number of days a token will remain valid.
-my $maxtokenage = 3;
-
-################################################################################
-# Functions
-################################################################################
-
-sub IssueEmailChangeToken {
-    my ($userid, $old_email, $new_email) = @_;
-
-    my $token_ts = time();
-    my $issuedate = time2str("%Y-%m-%d %H:%M", $token_ts);
-
-    # Generate a unique token and insert it into the tokens table.
-    # We have to lock the tokens table before generating the token, 
-    # since the database must be queried for token uniqueness.
-    &::SendSQL("LOCK TABLES tokens WRITE");
-    my $token = GenerateUniqueToken();
-    my $quotedtoken = &::SqlQuote($token);
-    my $quoted_emails = &::SqlQuote($old_email . ":" . $new_email);
-    &::SendSQL("INSERT INTO tokens ( userid , issuedate , token , 
-                                     tokentype , eventdata )
-                VALUES             ( $userid , '$issuedate' , $quotedtoken , 
-                                     'emailold' , $quoted_emails )");
-    my $newtoken = GenerateUniqueToken();
-    $quotedtoken = &::SqlQuote($newtoken);
-    &::SendSQL("INSERT INTO tokens ( userid , issuedate , token , 
-                                     tokentype , eventdata )
-                VALUES             ( $userid , '$issuedate' , $quotedtoken , 
-                                     'emailnew' , $quoted_emails )");
-    &::SendSQL("UNLOCK TABLES");
-
-    # Mail the user the token along with instructions for using it.
-
-    my $template = $::template;
-    my $vars = $::vars;
-
-    $vars->{'oldemailaddress'} = $old_email . &::Param('emailsuffix');
-    $vars->{'newemailaddress'} = $new_email . &::Param('emailsuffix');
-    
-    $vars->{'max_token_age'} = $maxtokenage;
-    $vars->{'token_ts'} = $token_ts;
-
-    $vars->{'token'} = $token;
-    $vars->{'emailaddress'} = $old_email . &::Param('emailsuffix');
-
-    my $message;
-    $template->process("account/email/change-old.txt.tmpl", $vars, \$message)
-      || &::ThrowTemplateError($template->error());
-
-    open SENDMAIL, "|/usr/lib/sendmail -t -i";
-    print SENDMAIL $message;
-    close SENDMAIL;
-
-    $vars->{'token'} = $newtoken;
-    $vars->{'emailaddress'} = $new_email . &::Param('emailsuffix');
-
-    $message = "";
-    $template->process("account/email/change-new.txt.tmpl", $vars, \$message)
-      || &::ThrowTemplateError($template->error());
-
-    open SENDMAIL, "|/usr/lib/sendmail -t -i";
-    print SENDMAIL $message;
-    close SENDMAIL;
-
-}
-
-sub IssuePasswordToken {
-    # Generates a random token, adds it to the tokens table, and sends it
-    # to the user with instructions for using it to change their password.
-
-    my ($loginname) = @_;
-
-    # Retrieve the user's ID from the database.
-    my $quotedloginname = &::SqlQuote($loginname);
-    &::SendSQL("SELECT userid FROM profiles WHERE login_name = $quotedloginname");
-    my ($userid) = &::FetchSQLData();
-
-    my $token_ts = time();
-    my $issuedate = time2str("%Y-%m-%d %H:%M", $token_ts);
-
-    # Generate a unique token and insert it into the tokens table.
-    # We have to lock the tokens table before generating the token, 
-    # since the database must be queried for token uniqueness.
-    &::SendSQL("LOCK TABLES tokens WRITE");
-    my $token = GenerateUniqueToken();
-    my $quotedtoken = &::SqlQuote($token);
-    my $quotedipaddr = &::SqlQuote($::ENV{'REMOTE_ADDR'});
-    &::SendSQL("INSERT INTO tokens ( userid , issuedate , token , tokentype , eventdata )
-                VALUES      ( $userid , '$issuedate' , $quotedtoken , 'password' , $quotedipaddr )");
-    &::SendSQL("UNLOCK TABLES");
-
-    # Mail the user the token along with instructions for using it.
-    
-    my $template = $::template;
-    my $vars = $::vars;
-
-    $vars->{'token'} = $token;
-    $vars->{'emailaddress'} = $loginname . &::Param('emailsuffix');
-
-    $vars->{'max_token_age'} = $maxtokenage;
-    $vars->{'token_ts'} = $token_ts;
-
-    my $message = "";
-    $template->process("account/password/forgotten-password.txt.tmpl", 
-                                                               $vars, \$message)
-      || &::ThrowTemplateError($template->error());
-
-    open SENDMAIL, "|/usr/lib/sendmail -t -i";
-    print SENDMAIL $message;
-    close SENDMAIL;
-
-}
-
-
-sub CleanTokenTable {
-    &::SendSQL("LOCK TABLES tokens WRITE");
-    &::SendSQL("DELETE FROM tokens 
-                WHERE TO_DAYS(NOW()) - TO_DAYS(issuedate) >= " . $maxtokenage);
-    &::SendSQL("UNLOCK TABLES");
-}
-
-
-sub GenerateUniqueToken {
-    # Generates a unique random token.  Uses &GenerateRandomPassword 
-    # for the tokens themselves and checks uniqueness by searching for
-    # the token in the "tokens" table.  Gives up if it can't come up
-    # with a token after about one hundred tries.
-
-    my $token;
-    my $duplicate = 1;
-    my $tries = 0;
-    while ($duplicate) {
-
-        ++$tries;
-        if ($tries > 100) {
-            &::DisplayError("Something is seriously wrong with the token generation system.");
-            exit;
-        }
-
-        $token = &::GenerateRandomPassword();
-        &::SendSQL("SELECT userid FROM tokens WHERE token = " . &::SqlQuote($token));
-        $duplicate = &::FetchSQLData();
-    }
-
-    return $token;
-
-}
-
-
-sub Cancel {
-    # Cancels a previously issued token and notifies the system administrator.
-    # This should only happen when the user accidentally makes a token request
-    # or when a malicious hacker makes a token request on behalf of a user.
-    
-    my ($token, $cancelaction) = @_;
-
-    # Quote the token for inclusion in SQL statements.
-    my $quotedtoken = &::SqlQuote($token);
-    
-    # Get information about the token being cancelled.
-    &::SendSQL("SELECT  issuedate , tokentype , eventdata , login_name , realname
-                FROM    tokens, profiles 
-                WHERE   tokens.userid = profiles.userid
-                AND     token = $quotedtoken");
-    my ($issuedate, $tokentype, $eventdata, $loginname, $realname) = &::FetchSQLData();
-
-    # Get the email address of the Bugzilla maintainer.
-    my $maintainer = &::Param('maintainer');
-
-    # Format the user's real name and email address into a single string.
-    my $username = $realname ? $realname . " <" . $loginname . ">" : $loginname;
-
-    my $template = $::template;
-    my $vars = $::vars;
-
-    $vars->{'emailaddress'} = $username;
-    $vars->{'maintainer'} = $maintainer;
-    $vars->{'remoteaddress'} = $::ENV{'REMOTE_ADDR'};
-    $vars->{'token'} = $token;
-    $vars->{'tokentype'} = $tokentype;
-    $vars->{'issuedate'} = $issuedate;
-    $vars->{'eventdata'} = $eventdata;
-    $vars->{'cancelaction'} = $cancelaction;
-
-    # Notify the user via email about the cancellation.
-
-    my $message;
-    $template->process("account/cancel-token.txt.tmpl", $vars, \$message)
-      || &::ThrowTemplateError($template->error());
-
-    open SENDMAIL, "|/usr/lib/sendmail -t -i";
-    print SENDMAIL $message;
-    close SENDMAIL;
-
-    # Delete the token from the database.
-    &::SendSQL("LOCK TABLES tokens WRITE");
-    &::SendSQL("DELETE FROM tokens WHERE token = $quotedtoken");
-    &::SendSQL("UNLOCK TABLES");
-}
-
-sub HasPasswordToken {
-    # Returns a password token if the user has one.
-    
-    my ($userid) = @_;
-    
-    &::SendSQL("SELECT token FROM tokens 
-                WHERE userid = $userid AND tokentype = 'password' LIMIT 1");
-    my ($token) = &::FetchSQLData();
-    
-    return $token;
-}
-
-sub HasEmailChangeToken {
-    # Returns an email change token if the user has one. 
-    
-    my ($userid) = @_;
-    
-    &::SendSQL("SELECT token FROM tokens 
-                 WHERE userid = $userid 
-                   AND tokentype = 'emailnew' 
-                    OR tokentype = 'emailold' LIMIT 1");
-    my ($token) = &::FetchSQLData();
-    
-    return $token;
-}
-
-
-1;

mozilla/webtools/bugzilla/UPGRADING

@@ -1,3 +0,0 @@
-Please consult The Bugzilla Guide for instructions on how to upgrade
-Bugzilla from an older version.  The Guide can be found with this
-distribution, in docs/html, docs/txt, and docs/sgml.

mozilla/webtools/bugzilla/UPGRADING-pre-2.8

@@ -1,407 +0,0 @@
-This file contains only important changes made to Bugzilla before release
-2.8.  If you are upgrading from version older than 2.8, please read this file.
-If you are upgrading from 2.8 or newer, please read the Installation and
-Upgrade instructions in The Bugzilla Guide, found with this distribution in
-docs/html, docs/txt, and docs/sgml.
-
-For a complete list of what changes, use Bonsai
-(http://cvs-mirror.mozilla.org/webtools/bonsai/cvsqueryform.cgi) to
-query the CVS tree.  For example,
-
-    http://cvs-mirror.mozilla.org/webtools/bonsai/cvsquery.cgi?module=all&branch=HEAD&branchtype=match&dir=mozilla%2Fwebtools%2Fbugzilla&file=&filetype=match&who=&whotype=match&sortby=Date&hours=2&date=week&mindate=&maxdate=&cvsroot=%2Fcvsroot 
-
-will tell you what has been changed in the last week.
-
-
-10/12/99 The CHANGES file is now obsolete!  There is a new file called
-checksetup.pl.  You should get in the habit of running that file every time
-you update your installation of Bugzilla.  That file will be constantly 
-updated to automatically update your installation to match any code changes.
-If you're curious as to what is going on, changes are commented in that file, 
-at the end.
-
-Many thanks to Holger Schurig <holgerschurig@nikocity.de> for writing this
-script!
-
-
-
-10/11/99 Restructured voting database to add a cached value in each
-bug recording how many total votes that bug has.  While I'm at it, I
-removed the unused "area" field from the bugs database.  It is
-distressing to realize that the bugs table has reached the maximum
-number of indices allowed by MySQL (16), which may make future
-enhancements awkward.
-
-You must feed the following to MySQL:
-
-	alter table bugs drop column area;
-	alter table bugs add column votes mediumint not null, add index (votes);
-
-You then *must* delete the data/versioncache file when you make this
-change, as it contains references to the "area" field.  Deleting it is safe,
-bugzilla will correctly regenerate it.
-
-If you have been using the voting feature at all, then you will then
-need to update the voting cache.  You can do this by visiting the
-sanitycheck.cgi page, and taking it up on its offer to rebuild the
-votes stuff.
-
-
-10/7/99 Added voting ability.  You must run the new script
-"makevotestable.sh".  You must also feed the following to mysql:
-
-	alter table products add column votesperuser smallint not null;
-
-
-
-9/15/99 Apparently, newer alphas of MySQL won't allow you to have
-"when" as a column name.  So, I have had to rename a column in the
-bugs_activity table.  You must feed the below to mysql or you won't
-work at all.
-
-	alter table bugs_activity change column when bug_when datetime not null;
-
-
-8/16/99 Added "OpenVMS" to the list of OS's. Feed this to mysql:
-
-	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "Mac System 8.6", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "FreeBSD", "OSF/1", "Solaris", "SunOS", "Neutrino", "OS/2", "BeOS", "OpenVMS", "other") not null;
-
-6/22/99 Added an entry to the attachments table to record who the submitter
-was.  Nothing uses this yet, but it still should be recorded.
-
-	alter table attachments add column submitter_id mediumint not null;
-
-You should also run this script to populate the new field:
-
-#!/usr/bonsaitools/bin/perl -w
-use diagnostics;
-use strict;
-require "globals.pl";
-$|=1;
-ConnectToDatabase();
-SendSQL("select bug_id, attach_id from attachments order by bug_id");
-my @list;
-while (MoreSQLData()) {
-    my @row = FetchSQLData();
-    push(@list, \@row);
-}
-foreach my $ref (@list) {
-    my ($bug, $attach) = (@$ref);
-    SendSQL("select long_desc from bugs where bug_id = $bug");
-    my $comment = FetchOneColumn() . "Created an attachment (id=$attach)";
-
-    if ($comment =~ m@-* Additional Comments From ([^ ]*)[- 0-9/:]*\nCreated an attachment \(id=$attach\)@) {
-	print "Found $1\n";
-	SendSQL("select userid from profiles where login_name=" .
-		SqlQuote($1));
-	my $userid = FetchOneColumn();
-	if (defined $userid && $userid > 0) {
-	    SendSQL("update attachments set submitter_id=$userid where attach_id = $attach");
-	}
-    } else {
-	print "Bug $bug can't find comment for attachment $attach\n";
-    }
-}
-
-
-
-
-
-
-6/14/99 Added "BeOS" to the list of OS's. Feed this to mysql:
-
-	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "Mac System 8.6", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "FreeBSD", "OSF/1", "Solaris", "SunOS", "Neutrino", "OS/2", "BeOS", "other") not null;
-
-
-5/27/99 Added support for dependency information.  You must run the new
-"makedependenciestable.sh" script.  You can turn off dependencies with the new
-"usedependencies" param, but it defaults to being on.  Also, read very
-carefully the description for the new "webdotbase" param; you will almost
-certainly need to tweak it.
-
-
-5/24/99 Added "Mac System 8.6" and "Neutrino" to the list of OS's.
-Feed this to mysql:
-
-	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "Mac System 8.6", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "FreeBSD", "OSF/1", "Solaris", "SunOS", "Neutrino", "OS/2", "other") not null;
-
-
-5/12/99 Added a pref to control how much email you get.  This needs a new
-column in the profiles table, so feed the following to mysql:
-
-	alter table profiles add column emailnotification enum("ExcludeSelfChanges", "CConly", "All") not null default "ExcludeSelfChanges";
-
-5/5/99 Added the ability to search by creation date.  To make this perform
-well, you ought to do the following:
-
-	alter table bugs change column creation_ts creation_ts datetime not null, add index (creation_ts);
-
-
-4/30/99 Added a new severity, "blocker".  To get this into your running
-Bugzilla, do the following:
-
-	alter table bugs change column bug_severity bug_severity enum("blocker", "critical", "major", "normal", "minor", "trivial", "enhancement") not null;
-
-
-4/22/99 There was a bug where the long descriptions of bugs had a variety of
-newline characters at the end, depending on the operating system of the browser
-that submitted the text.  This bug has been fixed, so that no further changes
-like that will happen.  But to fix problems that have already crept into your
-database, you can run the following perl script (which is slow and ugly, but
-does work:)
-#!/usr/bonsaitools/bin/perl -w
-use diagnostics;
-use strict;
-require "globals.pl";
-$|=1;
-ConnectToDatabase();
-SendSQL("select bug_id from bugs order by bug_id");
-my @list;
-while (MoreSQLData()) {
-    push(@list, FetchOneColumn());
-}
-foreach my $id (@list) {
-    if ($id % 50 == 0) {
-	print "\n$id ";
-    }
-    SendSQL("select long_desc from bugs where bug_id = $id");
-    my $comment = FetchOneColumn();
-    my $orig = $comment;
-    $comment =~ s/\r\n/\n/g;     # Get rid of windows-style line endings.
-    $comment =~ s/\r/\n/g;       # Get rid of mac-style line endings.
-    if ($comment ne $orig) {
-	SendSQL("update bugs set long_desc = " . SqlQuote($comment) .
-		" where bug_id = $id");
-	print ".";
-    } else {
-	print "-";
-    }
-}
-
-
-
-4/8/99 Added ability to store patches with bugs.  This requires a new table
-to store the data, so you will need to run the "makeattachmenttable.sh" script.
-
-3/25/99 Unfortunately, the HTML::FromText CPAN module had too many bugs, and
-so I had to roll my own.  We no longer use the HTML::FromText CPAN module.
-
-3/24/99 (This entry has been removed.  It used to say that we required the
-HTML::FromText CPAN module, but that's no longer true.)
-
-3/22/99 Added the ability to query by fields which have changed within a date
-range.  To make this perform a bit better, we need a new index:
-
-	alter table bugs_activity add index (field);
-
-3/10/99 Added 'groups' stuff, where we have different group bits that we can
-put on a person or on a bug.  Some of the group bits control access to bugzilla
-features.  And a person can't access a bug unless he has every group bit set
-that is also set on the bug.  See the comments in makegroupstable.sh for a bit
-more info.
-
-The 'maintainer' param is now used only as an email address for people to send
-complaints to.  The groups table is what is now used to determine permissions.
-
-You will need to run the new script "makegroupstable.sh".  And then you need to
-feed the following lines to MySQL (replace XXX with the login name of the
-maintainer, the person you wish to be all-powerful).
-
-	alter table bugs add column groupset bigint not null;
-	alter table profiles add column groupset bigint not null;
-	update profiles set groupset=0x7fffffffffffffff where login_name = XXX;
-
-
-
-3/8/99 Added params to control how priorities are set in a new bug.  You can
-now choose whether to let submitters of new bugs choose a priority, or whether
-they should just accept the default priority (which is now no longer hardcoded
-to "P2", but is instead a param.)  The default value of the params will cause
-the same behavior as before.
-
-3/3/99 Added a "disallownew" field to the products table.  If non-zero, then
-don't let people file new bugs against this product.  (This is for when a 
-product is retired, but you want to keep the bug reports around for posterity.)
-Feed this to MySQL:
-
-	alter table products add column disallownew tinyint not null;
-
-
-2/8/99 Added FreeBSD to the list of OS's.  Feed this to MySQL:
-
-	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "FreeBSD", "OSF/1", "Solaris", "SunOS", "OS/2", "other") not null;
-
-
-2/4/99 Added a new column "description" to the components table, and added 
-links to a new page which will use this to describe the components of a 
-given product.  Feed this to MySQL:
-
-	alter table components add column description mediumtext not null;
-
-
-2/3/99 Added a new column "initialqacontact" to the components table that gives
-an initial QA contact field.  It may be empty if you wish the initial qa
-contact to be empty.  If you're not using the QA contact field, you don't need
-to add this column, but you might as well be safe and add it anyway:
-
-	alter table components add column initialqacontact tinytext not null;
-
-
-2/2/99 Added a new column "milestoneurl" to the products table that gives a URL
-which is to describe the currently defined milestones for a product.  If you
-don't use target milestone, you might be able to get away without adding this
-column, but you might as well be safe and add it anyway:
-
-	alter table products add column milestoneurl tinytext not null;
-
-
-1/29/99 Whoops; had a misspelled op_sys.  It was "Mac System 7.1.6"; it should
-be "Mac System 7.6.1".  It turns out I had no bugs with this value set, so I
-could just do the below simple command.  If you have bugs with this value, you
-may need to do something more complicated.
-
-	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "OSF/1", "Solaris", "SunOS", "OS/2", "other") not null;
-
-
-
-1/20/99 Added new fields: Target Milestone, QA Contact, and Status Whiteboard.
-These fields are all optional in the UI; there are parameters to turn them on.
-However, whether or not you use them, the fields need to be in the DB.  There
-is some code that needs them, even if you don't.
-
-To update your DB to have these fields, send the following to MySQL:
-
-        alter table bugs add column target_milestone varchar(20) not null,
-                add column qa_contact mediumint not null,
-                add column status_whiteboard mediumtext not null,
-                add index (target_milestone), add index (qa_contact);
-
-
-
-1/18/99 You can now query by CC.  To make this perform reasonably, the CC table
-needs some indices.  The following MySQL does the necessary stuff:
-
-	alter table cc add index (bug_id), add index (who);
-
-
-1/15/99 The op_sys field can now be queried by (and more easily tweaked).
-To make this perform reasonably, it needs an index.  The following MySQL 
-command will create the necessary index:
-
-	alter table bugs add index (op_sys);
-
-
-12/2/98 The op_sys and rep_platform fields have been tweaked.  op_sys
-is now an enum, rather than having the legal values all hard-coded in
-perl.  rep_platform now no longer allows a value of "X-Windows".
-
-Here's how I ported to the new world.  This ought to work for you too.
-Actually, it's probably overkill.  I had a lot of illegal values for op_sys
-in my tables, from importing bugs from strange places.  If you haven't done 
-anything funky, then much of the below will be a no-op.
-
-First, send the following commands to MySQL to make sure all your values for
-rep_platform and op_sys are legal in the new world..
-
-	update bugs set rep_platform="Sun" where rep_platform="X-Windows" and op_sys like "Solaris%";
-	update bugs set rep_platform="SGI" where rep_platform="X-Windows" and op_sys = "IRIX";
-	update bugs set rep_platform="SGI" where rep_platform="X-Windows" and op_sys = "HP-UX";
-	update bugs set rep_platform="DEC" where rep_platform="X-Windows" and op_sys = "OSF/1";
-	update bugs set rep_platform="PC" where rep_platform="X-Windows" and op_sys = "Linux";
-	update bugs set rep_platform="other" where rep_platform="X-Windows";
-	update bugs set rep_platform="other" where rep_platform="";
-	update bugs set op_sys="Mac System 7" where op_sys="System 7";
-	update bugs set op_sys="Mac System 7.5" where op_sys="System 7.5";
-	update bugs set op_sys="Mac System 8.0" where op_sys="8.0";
-	update bugs set op_sys="OSF/1" where op_sys="Digital Unix 4.0";
-	update bugs set op_sys="IRIX" where op_sys like "IRIX %";
-	update bugs set op_sys="HP-UX" where op_sys like "HP-UX %";
-	update bugs set op_sys="Windows NT" where op_sys like "NT %";
-	update bugs set op_sys="OSF/1" where op_sys like "OSF/1 %";
-	update bugs set op_sys="Solaris" where op_sys like "Solaris %";
-	update bugs set op_sys="SunOS" where op_sys like "SunOS%";
-	update bugs set op_sys="other" where op_sys = "Motif";
-	update bugs set op_sys="other" where op_sys = "Other";
-
-Next, send the following commands to make sure you now have only legal
-entries in your table.  If either of the queries do not come up empty, then
-you have to do more stuff like the above.
-
-	select bug_id,op_sys,rep_platform from bugs where rep_platform not regexp "^(All|DEC|HP|Macintosh|PC|SGI|Sun|X-Windows|Other)$";
-	select bug_id,op_sys,rep_platform from bugs where op_sys not regexp "^(All|Windows 3.1|Windows 95|Windows 98|Windows NT|Mac System 7|Mac System 7.5|Mac System 7.1.6|Mac System 8.0|AIX|BSDI|HP-UX|IRIX|Linux|OSF/1|Solaris|SunOS|other)$";
-
-Finally, once that's all clear, alter the table to make enforce the new legal
-entries:
-
-	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.1.6", "Mac System 8.0", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "OSF/1", "Solaris", "SunOS", "other") not null, change column rep_platform rep_platform enum("All", "DEC", "HP", "Macintosh", "PC", "SGI", "Sun", "Other");
-
-
-
-
-
-11/20/98 Added searching of CC field.  To better support this, added
-some indexes to the CC table.  You probably want to execute the following
-mysql commands:
-
-	alter table cc add index (bug_id);
-	alter table cc add index (who);
-
-
-10/27/98 security check for legal products in place. bug charts are not
-available as an option if collectstats.pl has never been run. all products 
-get daily stats collected now. README updated: Chart::Base is listed as
-a requirement, instructions for using collectstats.pl included as 
-an optional step. also got silly and added optional quips to bug
-reports. 
-
-10/17/98 modified README installation instructions slightly. 
-
-10/7/98 Added a new table called "products".  Right now, this is used
-only to have a description for each product, and that description is
-only used when initially adding a new bug.  Anyway, you *must* create
-the new table (which you can do by running the new makeproducttable.sh
-script).  If you just leave it empty, things will work much as they
-did before, or you can add descriptions for some or all of your
-products.
-
-
-9/15/98 Everything has been ported to Perl.  NO MORE TCL.  This
-transition should be relatively painless, except for the "params"
-file.  This is the file that contains parameters you've set up on the
-editparams.cgi page.  Before changing to Perl, this was a tcl-syntax
-file, stored in the same directory as the code; after the change to
-Perl, it becomes a perl-syntax file, stored in a subdirectory named
-"data".  See the README file for more details on what version of Perl
-you need.
-
-So, if updating from an older version of Bugzilla, you will need to
-edit data/param, change the email address listed for
-$::param{'maintainer'}, and then go revisit the editparams.cgi page
-and reset all the parameters to your taste.  Fortunately, your old
-params file will still be around, and so you ought to be able to
-cut&paste important bits from there.
-
-Also, note that the "whineatnews" script has changed name (it now has
-an extension of .pl instead of .tcl), so you'll need to change your
-cron job.
-
-And the "comments" file has been moved to the data directory.  Just do
-"cat comments >> data/comments" to restore any old comments that may
-have been lost.
-
-
-
-9/2/98 Changed the way password validation works.  We now keep a
-crypt'd version of the password in the database, and check against
-that.  (This is silly, because we're also keeping the plaintext
-version there, but I have plans...)  Stop passing the plaintext
-password around as a cookie; instead, we have a cookie that references
-a record in a new database table, logincookies.
-
-IMPORTANT: if updating from an older version of Bugzilla, you must run
-the following commands to keep things working:
-
- ./makelogincookiestable.sh
- echo "alter table profiles add column cryptpassword varchar(64);" | mysql bugs
- echo "update profiles set cryptpassword = encrypt(password,substring(rand(),3, 4));" | mysql bugs
-

mozilla/webtools/bugzilla/attachment.cgi

@@ -1,788 +0,0 @@
-#!/usr/bonsaitools/bin/perl -wT
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-#                 Myk Melez <myk@mozilla.org>
-
-################################################################################
-# Script Initialization
-################################################################################
-
-# Make it harder for us to do dangerous things in Perl.
-use diagnostics;
-use strict;
-
-use lib qw(.);
-
-use vars qw(
-  $template
-  $vars
-);
-
-# Include the Bugzilla CGI and general utility library.
-require "CGI.pl";
-
-# Establish a connection to the database backend.
-ConnectToDatabase();
-
-# Check whether or not the user is logged in and, if so, set the $userid 
-my $userid = quietly_check_login();
-
-################################################################################
-# Main Body Execution
-################################################################################
-
-# All calls to this script should contain an "action" variable whose value
-# determines what the user wants to do.  The code below checks the value of
-# that variable and runs the appropriate code.
-
-# Determine whether to use the action specified by the user or the default.
-my $action = $::FORM{'action'} || 'view';
-
-if ($action eq "view")  
-{ 
-  validateID();
-  view(); 
-}
-elsif ($action eq "viewall") 
-{ 
-  ValidateBugID($::FORM{'bugid'}, $userid);
-  viewall(); 
-}
-elsif ($action eq "enter") 
-{ 
-  my $userid = confirm_login();
-  ValidateBugID($::FORM{'bugid'}, $userid);
-  enter(); 
-}
-elsif ($action eq "insert")
-{
-  my $userid = confirm_login();
-  ValidateBugID($::FORM{'bugid'}, $userid);
-  ValidateComment($::FORM{'comment'});
-  validateFilename();
-  validateData();
-  validateDescription();
-  validateIsPatch();
-  validateContentType() unless $::FORM{'ispatch'};
-  validateObsolete() if $::FORM{'obsolete'};
-  insert();
-}
-elsif ($action eq "edit") 
-{ 
-  quietly_check_login();
-  validateID();
-  validateCanEdit($::FORM{'id'});
-  edit(); 
-}
-elsif ($action eq "update") 
-{ 
-  my $userid = confirm_login();
-  UserInGroup($userid, "editbugs")
-    || DisplayError("You are not authorized to edit attachments.")
-    && exit;
-  ValidateComment($::FORM{'comment'});
-  validateID();
-  validateCanEdit($::FORM{'id'});
-  validateDescription();
-  validateIsPatch();
-  validateContentType() unless $::FORM{'ispatch'};
-  validateIsObsolete();
-  validateStatuses();
-  update();
-}
-else 
-{ 
-  DisplayError("I could not figure out what you wanted to do.")
-}
-
-exit;
-
-################################################################################
-# Data Validation / Security Authorization
-################################################################################
-
-sub validateID
-{
-  # Validate the value of the "id" form field, which must contain an
-  # integer that is the ID of an existing attachment.
-
-  detaint_natural($::FORM{'id'})
-    || DisplayError("You did not enter a valid attachment number.") 
-      && exit;
-  
-  # Make sure the attachment exists in the database.
-  SendSQL("SELECT bug_id FROM attachments WHERE attach_id = $::FORM{'id'}");
-  MoreSQLData()
-    || DisplayError("Attachment #$::FORM{'id'} does not exist.") 
-    && exit;
-
-  # Make sure the user is authorized to access this attachment's bug.
-  my ($bugid) = FetchSQLData();
-  ValidateBugID($bugid, $userid);
-}
-
-sub validateCanEdit
-{
-    my ($attach_id) = (@_);
-
-    # If the user is not logged in, claim that they can edit. This allows
-    # the edit scrren to be displayed to people who aren't logged in.
-    # People not logged in can't actually commit changes, because that code
-    # calls confirm_login, not quietly_check_login, before calling this sub
-    return if $userid == 0;
-
-    # People in editbugs can edit all attachments
-    return if UserInGroup($userid, "editbugs");
-
-    # Bug 97729 - the submitter can edit their attachments
-    SendSQL("SELECT attach_id FROM attachments WHERE " .
-            "attach_id = $attach_id AND submitter_id = $userid");
-
-    FetchSQLData()
-      || DisplayError("You are not authorised to edit attachment #$attach_id")
-      && exit;
-}
-
-sub validateDescription
-{
-  $::FORM{'description'}
-    || DisplayError("You must enter a description for the attachment.")
-      && exit;
-}
-
-sub validateIsPatch
-{
-  # Set the ispatch flag to zero if it is undefined, since the UI uses
-  # an HTML checkbox to represent this flag, and unchecked HTML checkboxes
-  # do not get sent in HTML requests.
-  $::FORM{'ispatch'} = $::FORM{'ispatch'} ? 1 : 0;
-
-  # Set the content type to text/plain if the attachment is a patch.
-  $::FORM{'contenttype'} = "text/plain" if $::FORM{'ispatch'};
-}
-
-sub validateContentType
-{
-  if (!$::FORM{'contenttypemethod'})
-  {
-    DisplayError("You must choose a method for determining the content type,
-      either <em>auto-detect</em>, <em>select from list</em>, or <em>enter 
-      manually</em>.");
-    exit;
-  }
-  elsif ($::FORM{'contenttypemethod'} eq 'autodetect')
-  {
-    # The user asked us to auto-detect the content type, so use the type
-    # specified in the HTTP request headers.
-    if ( !$::FILE{'data'}->{'contenttype'} )
-    {
-      DisplayError("You asked Bugzilla to auto-detect the content type, but
-        your browser did not specify a content type when uploading the file, 
-        so you must enter a content type manually.");
-      exit;
-    }
-    $::FORM{'contenttype'} = $::FILE{'data'}->{'contenttype'};
-  }
-  elsif ($::FORM{'contenttypemethod'} eq 'list')
-  {
-    # The user selected a content type from the list, so use their selection.
-    $::FORM{'contenttype'} = $::FORM{'contenttypeselection'};
-  }
-  elsif ($::FORM{'contenttypemethod'} eq 'manual')
-  {
-    # The user entered a content type manually, so use their entry.
-    $::FORM{'contenttype'} = $::FORM{'contenttypeentry'};
-  }
-  else
-  {
-    my $htmlcontenttypemethod = html_quote($::FORM{'contenttypemethod'});
-    DisplayError("Your form submission got corrupted somehow.  The <em>content
-      method</em> field, which specifies how the content type gets determined,
-      should have been either <em>autodetect</em>, <em>list</em>, 
-      or <em>manual</em>, but was instead <em>$htmlcontenttypemethod</em>.");
-    exit;
-  }
-
-  if ( $::FORM{'contenttype'} !~ /^(application|audio|image|message|model|multipart|text|video)\/.+$/ )
-  {
-    my $htmlcontenttype = html_quote($::FORM{'contenttype'});
-    DisplayError("The content type <em>$htmlcontenttype</em> is invalid.
-      Valid types must be of the form <em>foo/bar</em> where <em>foo</em> 
-      is either <em>application, audio, image, message, model, multipart, 
-      text,</em> or <em>video</em>.");
-    exit;
-  }
-}
-
-sub validateIsObsolete
-{
-  # Set the isobsolete flag to zero if it is undefined, since the UI uses
-  # an HTML checkbox to represent this flag, and unchecked HTML checkboxes
-  # do not get sent in HTML requests.
-  $::FORM{'isobsolete'} = $::FORM{'isobsolete'} ? 1 : 0;
-}
-
-sub validateStatuses
-{
-  # Get a list of attachment statuses that are valid for this attachment.
-  PushGlobalSQLState();
-  SendSQL("SELECT  attachstatusdefs.id
-           FROM    attachments, bugs, attachstatusdefs
-           WHERE   attachments.attach_id = $::FORM{'id'}
-           AND     attachments.bug_id = bugs.bug_id
-           AND     attachstatusdefs.product = bugs.product");
-  my @statusdefs;
-  push(@statusdefs, FetchSQLData()) while MoreSQLData();
-  PopGlobalSQLState();
-  
-  foreach my $status (@{$::MFORM{'status'}})
-  {
-    grep($_ == $status, @statusdefs)
-      || DisplayError("One of the statuses you entered is not a valid status
-                       for this attachment.")
-        && exit;
-    # We have tested that the status is valid, so it can be detainted
-    detaint_natural($status);
-  }
-}
-
-sub validateData
-{
-  $::FORM{'data'}
-    || DisplayError("The file you are trying to attach is empty!")
-      && exit;
-
-  my $len = length($::FORM{'data'});
-
-  my $maxpatchsize = Param('maxpatchsize');
-  my $maxattachmentsize = Param('maxattachmentsize');
-  
-  # Makes sure the attachment does not exceed either the "maxpatchsize" or 
-  # the "maxattachmentsize" parameter.
-  if ( $::FORM{'ispatch'} && $maxpatchsize && $len > $maxpatchsize*1024 )
-  {
-    my $lenkb = sprintf("%.0f", $len/1024);
-    DisplayError("The file you are trying to attach is ${lenkb} kilobytes (KB) in size.  
-                  Patches cannot be more than ${maxpatchsize}KB in size.
-                  Try breaking your patch into several pieces.");
-    exit;
-  } elsif ( !$::FORM{'ispatch'} && $maxattachmentsize && $len > $maxattachmentsize*1024 ) {
-    my $lenkb = sprintf("%.0f", $len/1024);
-    DisplayError("The file you are trying to attach is ${lenkb} kilobytes (KB) in size.  
-                  Non-patch attachments cannot be more than ${maxattachmentsize}KB.
-                  If your attachment is an image, try converting it to a compressable
-                  format like JPG or PNG, or put it elsewhere on the web and
-                  link to it from the bug's URL field or in a comment on the bug.");
-    exit;
-  }
-}
-
-sub validateFilename
-{
-  defined $::FILE{'data'}
-    || DisplayError("You did not specify a file to attach.")
-      && exit;
-}
-
-sub validateObsolete
-{
-  # Make sure the attachment id is valid and the user has permissions to view
-  # the bug to which it is attached.
-  foreach my $attachid (@{$::MFORM{'obsolete'}}) {
-    detaint_natural($attachid)
-      || DisplayError("The attachment number of one of the attachments 
-           you wanted to obsolete is invalid.") 
-        && exit;
-  
-    SendSQL("SELECT bug_id, isobsolete, description 
-             FROM attachments WHERE attach_id = $attachid");
-
-    # Make sure the attachment exists in the database.
-    MoreSQLData()
-      || DisplayError("Attachment #$attachid does not exist.") 
-        && exit;
-
-    my ($bugid, $isobsolete, $description) = FetchSQLData();
-
-    if ($bugid != $::FORM{'bugid'})
-    {
-      $description = html_quote($description);
-      DisplayError("Attachment #$attachid ($description) is attached 
-        to bug #$bugid, but you tried to flag it as obsolete while
-        creating a new attachment to bug #$::FORM{'bugid'}.");
-      exit;
-    }
-
-    if ( $isobsolete )
-    {
-      $description = html_quote($description);
-      DisplayError("Attachment #$attachid ($description) is already obsolete.");
-      exit;
-    }
-
-    # Check that the user can modify this attachment
-    validateCanEdit($attachid);
-  }
-
-}
-
-################################################################################
-# Functions
-################################################################################
-
-sub view
-{
-  # Display an attachment.
-
-  # Retrieve the attachment content and its content type from the database.
-  SendSQL("SELECT mimetype, thedata FROM attachments WHERE attach_id = $::FORM{'id'}");
-  my ($contenttype, $thedata) = FetchSQLData();
-    
-  # Return the appropriate HTTP response headers.
-  print "Content-Type: $contenttype\n\n";
-
-  print $thedata;
-}
-
-
-sub viewall
-{
-  # Display all attachments for a given bug in a series of IFRAMEs within one HTML page.
-
-  # Retrieve the attachments from the database and write them into an array
-  # of hashes where each hash represents one attachment.
-  SendSQL("SELECT attach_id, creation_ts, mimetype, description, ispatch, isobsolete 
-           FROM attachments WHERE bug_id = $::FORM{'bugid'} ORDER BY attach_id");
-  my @attachments; # the attachments array
-  while (MoreSQLData())
-  {
-    my %a; # the attachment hash
-    ($a{'attachid'}, $a{'date'}, $a{'contenttype'}, 
-     $a{'description'}, $a{'ispatch'}, $a{'isobsolete'}) = FetchSQLData();
-
-    # Format the attachment's creation/modification date into something readable.
-    if ($a{'date'} =~ /^(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)$/) {
-        $a{'date'} = "$3/$4/$2&nbsp;$5:$6";
-    }
-
-    # Flag attachments as to whether or not they can be viewed (as opposed to
-    # being downloaded).  Currently I decide they are viewable if their MIME type 
-    # is either text/*, image/*, or application/vnd.mozilla.*.
-    # !!! Yuck, what an ugly hack.  Fix it!
-    $a{'isviewable'} = ( $a{'contenttype'} =~ /^(text|image|application\/vnd\.mozilla\.)/ );
-
-    # Retrieve a list of status flags that have been set on the attachment.
-    PushGlobalSQLState();
-    SendSQL("SELECT    name 
-             FROM      attachstatuses, attachstatusdefs 
-             WHERE     attach_id = $a{'attachid'} 
-             AND       attachstatuses.statusid = attachstatusdefs.id
-             ORDER BY  sortkey");
-    my @statuses;
-    push(@statuses, FetchSQLData()) while MoreSQLData();
-    $a{'statuses'} = \@statuses;
-    PopGlobalSQLState();
-
-    # Add the hash representing the attachment to the array of attachments.
-    push @attachments, \%a;
-  }
-
-  # Retrieve the bug summary for displaying on screen.
-  SendSQL("SELECT short_desc FROM bugs WHERE bug_id = $::FORM{'bugid'}");
-  my ($bugsummary) = FetchSQLData();
-
-  # Define the variables and functions that will be passed to the UI template.
-  $vars->{'bugid'} = $::FORM{'bugid'};
-  $vars->{'bugsummary'} = $bugsummary;
-  $vars->{'attachments'} = \@attachments;
-
-  # Return the appropriate HTTP response headers.
-  print "Content-Type: text/html\n\n";
-
-  # Generate and return the UI (HTML page) from the appropriate template.
-  $template->process("attachment/show-multiple.html.tmpl", $vars)
-    || ThrowTemplateError($template->error());
-}
-
-
-sub enter
-{
-  # Display a form for entering a new attachment.
-
-  # Retrieve the attachments the user can edit from the database and write
-  # them into an array of hashes where each hash represents one attachment.
-  my $canEdit = "";
-  if (!UserInGroup($userid, "editbugs")) {
-      $canEdit = "AND submitter_id = $userid";
-  }
-  SendSQL("SELECT attach_id, description 
-           FROM attachments
-           WHERE bug_id = $::FORM{'bugid'}
-           AND isobsolete = 0 $canEdit
-           ORDER BY attach_id");
-  my @attachments; # the attachments array
-  while ( MoreSQLData() ) {
-    my %a; # the attachment hash
-    ($a{'id'}, $a{'description'}) = FetchSQLData();
-
-    # Add the hash representing the attachment to the array of attachments.
-    push @attachments, \%a;
-  }
-
-  # Retrieve the bug summary for displaying on screen.
-  SendSQL("SELECT short_desc FROM bugs WHERE bug_id = $::FORM{'bugid'}");
-  my ($bugsummary) = FetchSQLData();
-
-  # Define the variables and functions that will be passed to the UI template.
-  $vars->{'bugid'} = $::FORM{'bugid'};
-  $vars->{'bugsummary'} = $bugsummary;
-  $vars->{'attachments'} = \@attachments;
-
-  # Return the appropriate HTTP response headers.
-  print "Content-Type: text/html\n\n";
-
-  # Generate and return the UI (HTML page) from the appropriate template.
-  $template->process("attachment/create.html.tmpl", $vars)
-    || ThrowTemplateError($template->error());
-}
-
-
-sub insert
-{
-  # Insert a new attachment into the database.
-
-  # Escape characters in strings that will be used in SQL statements.
-  my $filename = SqlQuote($::FILE{'data'}->{'filename'});
-  my $description = SqlQuote($::FORM{'description'});
-  my $contenttype = SqlQuote($::FORM{'contenttype'});
-  my $thedata = SqlQuote($::FORM{'data'});
-
-  # Insert the attachment into the database.
-  SendSQL("INSERT INTO attachments (bug_id, filename, description, mimetype, ispatch, submitter_id, thedata) 
-           VALUES ($::FORM{'bugid'}, $filename, $description, $contenttype, $::FORM{'ispatch'}, $userid, $thedata)");
-
-  # Retrieve the ID of the newly created attachment record.
-  SendSQL("SELECT LAST_INSERT_ID()");
-  my $attachid = FetchOneColumn();
-
-  # Insert a comment about the new attachment into the database.
-  my $comment = "Created an attachment (id=$attachid)\n$::FORM{'description'}\n";
-  $comment .= ("\n" . $::FORM{'comment'}) if $::FORM{'comment'};
-
-  use Text::Wrap;
-  $Text::Wrap::columns = 80;
-  $Text::Wrap::huge = 'overflow';
-  $comment = Text::Wrap::wrap('', '', $comment);
-
-  AppendComment($::FORM{'bugid'}, 
-                $::COOKIE{"Bugzilla_login"},
-                $comment);
-
-  # Make existing attachments obsolete.
-  my $fieldid = GetFieldID('attachments.isobsolete');
-  foreach my $attachid (@{$::MFORM{'obsolete'}}) {
-    SendSQL("UPDATE attachments SET isobsolete = 1 WHERE attach_id = $attachid");
-    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
-             VALUES ($::FORM{'bugid'}, $attachid, $userid, NOW(), $fieldid, '0', '1')");
-  }
-
-  # Send mail to let people know the attachment has been created.  Uses a 
-  # special syntax of the "open" and "exec" commands to capture the output of 
-  # "processmail", which "system" doesn't allow, without running the command 
-  # through a shell, which backticks (``) do.
-  #system ("./processmail", $bugid , $userid);
-  #my $mailresults = `./processmail $bugid $::userid`;
-  my $mailresults = '';
-  open(PMAIL, "-|") or exec('./processmail', $::FORM{'bugid'}, $::COOKIE{'Bugzilla_login'});
-  $mailresults .= $_ while <PMAIL>;
-  close(PMAIL);
- 
-  # Define the variables and functions that will be passed to the UI template.
-  $vars->{'bugid'} = $::FORM{'bugid'};
-  $vars->{'attachid'} = $attachid;
-  $vars->{'description'} = $description;
-  $vars->{'mailresults'} = $mailresults;
-  $vars->{'contenttypemethod'} = $::FORM{'contenttypemethod'};
-  $vars->{'contenttype'} = $::FORM{'contenttype'};
-
-  # Return the appropriate HTTP response headers.
-  print "Content-Type: text/html\n\n";
-
-  # Generate and return the UI (HTML page) from the appropriate template.
-  $template->process("attachment/created.html.tmpl", $vars)
-    || ThrowTemplateError($template->error());
-}
-
-
-sub edit
-{
-  # Edit an attachment record.  Users with "editbugs" privileges, (or the 
-  # original attachment's submitter) can edit the attachment's description,
-  # content type, ispatch and isobsolete flags, and statuses, and they can
-  # also submit a comment that appears in the bug.
-  # Users cannot edit the content of the attachment itself.
-
-  # Retrieve the attachment from the database.
-  SendSQL("SELECT description, mimetype, bug_id, ispatch, isobsolete 
-           FROM attachments WHERE attach_id = $::FORM{'id'}");
-  my ($description, $contenttype, $bugid, $ispatch, $isobsolete) = FetchSQLData();
-
-  # Flag attachment as to whether or not it can be viewed (as opposed to
-  # being downloaded).  Currently I decide it is viewable if its content
-  # type is either text/.* or application/vnd.mozilla.*.
-  # !!! Yuck, what an ugly hack.  Fix it!
-  my $isviewable = ( $contenttype =~ /^(text|image|application\/vnd\.mozilla\.)/ );
-
-  # Retrieve a list of status flags that have been set on the attachment.
-  my %statuses;
-  SendSQL("SELECT  id, name 
-           FROM    attachstatuses JOIN attachstatusdefs 
-           WHERE   attachstatuses.statusid = attachstatusdefs.id 
-           AND     attach_id = $::FORM{'id'}");
-  while ( my ($id, $name) = FetchSQLData() )
-  {
-    $statuses{$id} = $name;
-  }
-
-  # Retrieve a list of statuses for this bug's product, and build an array 
-  # of hashes in which each hash is a status flag record.
-  # ???: Move this into versioncache or its own routine?
-  my @statusdefs;
-  SendSQL("SELECT   id, name 
-           FROM     attachstatusdefs, bugs 
-           WHERE    bug_id = $bugid 
-           AND      attachstatusdefs.product = bugs.product 
-           ORDER BY sortkey");
-  while ( MoreSQLData() )
-  {
-    my ($id, $name) = FetchSQLData();
-    push @statusdefs, { 'id' => $id , 'name' => $name };
-  }
-
-  # Retrieve a list of attachments for this bug as well as a summary of the bug
-  # to use in a navigation bar across the top of the screen.
-  SendSQL("SELECT attach_id FROM attachments WHERE bug_id = $bugid ORDER BY attach_id");
-  my @bugattachments;
-  push(@bugattachments, FetchSQLData()) while (MoreSQLData());
-  SendSQL("SELECT short_desc FROM bugs WHERE bug_id = $bugid");
-  my ($bugsummary) = FetchSQLData();
-
-  # Define the variables and functions that will be passed to the UI template.
-  $vars->{'attachid'} = $::FORM{'id'}; 
-  $vars->{'description'} = $description; 
-  $vars->{'contenttype'} = $contenttype; 
-  $vars->{'bugid'} = $bugid; 
-  $vars->{'bugsummary'} = $bugsummary; 
-  $vars->{'ispatch'} = $ispatch; 
-  $vars->{'isobsolete'} = $isobsolete; 
-  $vars->{'isviewable'} = $isviewable; 
-  $vars->{'statuses'} = \%statuses; 
-  $vars->{'statusdefs'} = \@statusdefs; 
-  $vars->{'attachments'} = \@bugattachments; 
-
-  # Return the appropriate HTTP response headers.
-  print "Content-Type: text/html\n\n";
-
-  # Generate and return the UI (HTML page) from the appropriate template.
-  $template->process("attachment/edit.html.tmpl", $vars)
-    || ThrowTemplateError($template->error());
-}
-
-
-sub update
-{
-  # Update an attachment record.
-
-  # Get the bug ID for the bug to which this attachment is attached.
-  SendSQL("SELECT bug_id FROM attachments WHERE attach_id = $::FORM{'id'}");
-  my $bugid = FetchSQLData() 
-    || DisplayError("Cannot figure out bug number.")
-    && exit;
-
-  # Lock database tables in preparation for updating the attachment.
-  SendSQL("LOCK TABLES attachments WRITE , attachstatuses WRITE , 
-           attachstatusdefs READ , fielddefs READ , bugs_activity WRITE");
-
-  # Get a copy of the attachment record before we make changes
-  # so we can record those changes in the activity table.
-  SendSQL("SELECT description, mimetype, ispatch, isobsolete 
-           FROM attachments WHERE attach_id = $::FORM{'id'}");
-  my ($olddescription, $oldcontenttype, $oldispatch, $oldisobsolete) = FetchSQLData();
-
-  # Get the list of old status flags.
-  SendSQL("SELECT    attachstatusdefs.name 
-           FROM      attachments, attachstatuses, attachstatusdefs
-           WHERE     attachments.attach_id = $::FORM{'id'}
-           AND       attachments.attach_id = attachstatuses.attach_id
-           AND       attachstatuses.statusid = attachstatusdefs.id
-           ORDER BY  attachstatusdefs.sortkey
-          ");
-  my @oldstatuses;
-  while (MoreSQLData()) {
-    push(@oldstatuses, FetchSQLData());
-  }
-  my $oldstatuslist = join(', ', @oldstatuses);
-
-  # Update the database with the new status flags.
-  SendSQL("DELETE FROM attachstatuses WHERE attach_id = $::FORM{'id'}");
-  foreach my $statusid (@{$::MFORM{'status'}}) 
-  {
-    SendSQL("INSERT INTO attachstatuses (attach_id, statusid) VALUES ($::FORM{'id'}, $statusid)");
-  }
-
-  # Get the list of new status flags.
-  SendSQL("SELECT    attachstatusdefs.name 
-           FROM      attachments, attachstatuses, attachstatusdefs
-           WHERE     attachments.attach_id = $::FORM{'id'}
-           AND       attachments.attach_id = attachstatuses.attach_id
-           AND       attachstatuses.statusid = attachstatusdefs.id
-           ORDER BY  attachstatusdefs.sortkey
-          ");
-  my @newstatuses;
-  while (MoreSQLData()) {
-    push(@newstatuses, FetchSQLData());
-  }
-  my $newstatuslist = join(', ', @newstatuses);
-
-  # Quote the description and content type for use in the SQL UPDATE statement.
-  my $quoteddescription = SqlQuote($::FORM{'description'});
-  my $quotedcontenttype = SqlQuote($::FORM{'contenttype'});
-
-  # Update the attachment record in the database.
-  # Sets the creation timestamp to itself to avoid it being updated automatically.
-  SendSQL("UPDATE  attachments 
-           SET     description = $quoteddescription , 
-                   mimetype = $quotedcontenttype , 
-                   ispatch = $::FORM{'ispatch'} , 
-                   isobsolete = $::FORM{'isobsolete'} , 
-                   creation_ts = creation_ts
-           WHERE   attach_id = $::FORM{'id'}
-         ");
-
-  # Record changes in the activity table.
-  if ($olddescription ne $::FORM{'description'}) {
-    my $quotedolddescription = SqlQuote($olddescription);
-    my $fieldid = GetFieldID('attachments.description');
-    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
-             VALUES ($bugid, $::FORM{'id'}, $userid, NOW(), $fieldid, $quotedolddescription, $quoteddescription)");
-  }
-  if ($oldcontenttype ne $::FORM{'contenttype'}) {
-    my $quotedoldcontenttype = SqlQuote($oldcontenttype);
-    my $fieldid = GetFieldID('attachments.mimetype');
-    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
-             VALUES ($bugid, $::FORM{'id'}, $userid, NOW(), $fieldid, $quotedoldcontenttype, $quotedcontenttype)");
-  }
-  if ($oldispatch ne $::FORM{'ispatch'}) {
-    my $fieldid = GetFieldID('attachments.ispatch');
-    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
-             VALUES ($bugid, $::FORM{'id'}, $userid, NOW(), $fieldid, $oldispatch, $::FORM{'ispatch'})");
-  }
-  if ($oldisobsolete ne $::FORM{'isobsolete'}) {
-    my $fieldid = GetFieldID('attachments.isobsolete');
-    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
-             VALUES ($bugid, $::FORM{'id'}, $userid, NOW(), $fieldid, $oldisobsolete, $::FORM{'isobsolete'})");
-  }
-  if ($oldstatuslist ne $newstatuslist) {
-    my ($removed, $added) = DiffStrings($oldstatuslist, $newstatuslist);
-    my $quotedremoved = SqlQuote($removed);
-    my $quotedadded = SqlQuote($added);
-    my $fieldid = GetFieldID('attachstatusdefs.name');
-    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
-             VALUES ($bugid, $::FORM{'id'}, $userid, NOW(), $fieldid, $quotedremoved, $quotedadded)");
-  }
-
-  # Unlock all database tables now that we are finished updating the database.
-  SendSQL("UNLOCK TABLES");
-
-  # If this installation has enabled the request manager, let the manager know
-  # an attachment was updated so it can check for requests on that attachment
-  # and fulfill them.  The request manager allows users to request database
-  # changes of other users and tracks the fulfillment of those requests.  When
-  # an attachment record is updated and the request manager is called, it will
-  # fulfill those requests that were requested of the user performing the update
-  # which are requests for the attachment being updated.
-  #my $requests;
-  #if (Param('userequestmanager'))
-  #{
-  #  use Request;
-  #  # Specify the fieldnames that have been updated.
-  #  my @fieldnames = ('description', 'mimetype', 'status', 'ispatch', 'isobsolete');
-  #  # Fulfill pending requests.
-  #  $requests = Request::fulfillRequest('attachment', $::FORM{'id'}, @fieldnames);
-  #  $vars->{'requests'} = $requests; 
-  #}
-
-  # If the user submitted a comment while editing the attachment, 
-  # add the comment to the bug.
-  if ( $::FORM{'comment'} )
-  {
-    use Text::Wrap;
-    $Text::Wrap::columns = 80;
-    $Text::Wrap::huge = 'wrap';
-
-    # Append a string to the comment to let users know that the comment came from
-    # the "edit attachment" screen.
-    my $comment = qq|(From update of attachment $::FORM{'id'})\n| . $::FORM{'comment'};
-
-    my $wrappedcomment = "";
-    foreach my $line (split(/\r\n|\r|\n/, $comment))
-    {
-      if ( $line =~ /^>/ )
-      {
-        $wrappedcomment .= $line . "\n";
-      }
-      else
-      {
-        $wrappedcomment .= wrap('', '', $line) . "\n";
-      }
-    }
-
-    # Get the user's login name since the AppendComment function needs it.
-    my $who = DBID_to_name($userid);
-
-    # Append the comment to the list of comments in the database.
-    AppendComment($bugid, $who, $wrappedcomment);
-
-  }
-
-  # Send mail to let people know the bug has changed.  Uses a special syntax
-  # of the "open" and "exec" commands to capture the output of "processmail",
-  # which "system" doesn't allow, without running the command through a shell,
-  # which backticks (``) do.
-  #system ("./processmail", $bugid , $userid);
-  #my $mailresults = `./processmail $bugid $userid`;
-  my $mailresults = '';
-  open(PMAIL, "-|") or exec('./processmail', $bugid, DBID_to_name($userid));
-  $mailresults .= $_ while <PMAIL>;
-  close(PMAIL);
- 
-  # Define the variables and functions that will be passed to the UI template.
-  $vars->{'attachid'} = $::FORM{'id'}; 
-  $vars->{'bugid'} = $bugid; 
-  $vars->{'mailresults'} = $mailresults; 
-
-  # Return the appropriate HTTP response headers.
-  print "Content-Type: text/html\n\n";
-
-  # Generate and return the UI (HTML page) from the appropriate template.
-  $template->process("attachment/updated.html.tmpl", $vars)
-    || ThrowTemplateError($template->error());
-}

mozilla/webtools/bugzilla/bug_form.pl

@@ -1,329 +0,0 @@
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-#                 Dave Miller <justdave@syndicomm.com>
-
-use diagnostics;
-use strict;
-
-use RelationSet;
-
-# Use the Attachment module to display attachments for the bug.
-use Attachment;
-
-sub show_bug {    
-    # Shut up misguided -w warnings about "used only once".  For some reason,
-    # "use vars" chokes on me when I try it here.
-    sub bug_form_pl_sillyness {
-        my $zz;
-        $zz = %::FORM;
-        $zz = %::proddesc;
-        $zz = %::prodmaxvotes;
-        $zz = @::enterable_products;                                            
-        $zz = @::settable_resolution;
-        $zz = $::unconfirmedstate;
-        $zz = $::milestoneurl;
-        $zz = $::template;
-        $zz = $::vars;
-        $zz = @::legal_priority;
-        $zz = @::legal_platform;
-        $zz = @::legal_severity;
-        $zz = @::legal_bug_status;
-        $zz = @::target_milestone;
-        $zz = @::components;
-        $zz = @::legal_keywords;
-        $zz = @::versions;
-        $zz = @::legal_opsys;
-    }
-
-    # Use templates
-    my $template = $::template;
-    my $vars = $::vars;
-    
-    $vars->{'GetBugLink'} = \&GetBugLink;
-    $vars->{'quoteUrls'} = \&quoteUrls,
-    $vars->{'lsearch'} = \&lsearch,
-    $vars->{'header_done'} = (@_),
-
-    my $userid = quietly_check_login();
-
-    my $id = $::FORM{'id'};
-    
-    if (!defined($id)) {
-      $template->process("bug/choose.html.tmpl", $vars)
-        || ThrowTemplateError($template->error());
-      exit;
-    }
-    
-    my %user = %{$vars->{'user'}};
-    my %bug;
-
-    # Populate the bug hash with the info we get directly from the DB.
-    my $query = "
-    SELECT bugs.bug_id, product, version, rep_platform, 
-        op_sys, bug_status, resolution, priority, 
-        bug_severity, component, assigned_to, reporter, 
-        bug_file_loc, short_desc, target_milestone, 
-        qa_contact, status_whiteboard, 
-        date_format(creation_ts,'%Y-%m-%d %H:%i'),
-        delta_ts, sum(votes.count)
-    FROM bugs LEFT JOIN votes USING(bug_id)
-    WHERE bugs.bug_id = $id
-    GROUP BY bugs.bug_id";
-
-    SendSQL($query);
-
-    my $value;
-    my @row = FetchSQLData();
-    foreach my $field ("bug_id", "product", "version", "rep_platform",
-                       "op_sys", "bug_status", "resolution", "priority",
-                       "bug_severity", "component", "assigned_to", "reporter",
-                       "bug_file_loc", "short_desc", "target_milestone",
-                       "qa_contact", "status_whiteboard", "creation_ts",
-                       "delta_ts", "votes") 
-    {
-        $value = shift(@row);
-        $bug{$field} = defined($value) ? $value : "";
-    }
-
-    # General arrays of info about the database state
-    GetVersionTable();
-
-    # Fiddle the product list.
-    my $seen_curr_prod;
-    my @prodlist;
-    
-    foreach my $product (@::enterable_products) {
-        if ($product eq $bug{'product'}) {
-            # if it's the product the bug is already in, it's ALWAYS in
-            # the popup, period, whether the user can see it or not, and
-            # regardless of the disallownew setting.
-            $seen_curr_prod = 1;
-            push(@prodlist, $product);
-            next;
-        }
-
-        if (Param("usebuggroupsentry")
-          && GroupExists($product)
-          && !UserInGroup($userid, $product))
-        {
-            # If we're using bug groups to restrict entry on products, and
-            # this product has a bug group, and the user is not in that
-            # group, we don't want to include that product in this list.
-            next;
-        }
-
-        push(@prodlist, $product);
-    }
-
-    # The current product is part of the popup, even if new bugs are no longer
-    # allowed for that product
-    if (!$seen_curr_prod) {
-        push (@prodlist, $bug{'product'});
-        @prodlist = sort @prodlist;
-    }
-
-    $vars->{'product'} = \@prodlist;
-    $vars->{'rep_platform'} = \@::legal_platform;
-    $vars->{'priority'} = \@::legal_priority;
-    $vars->{'bug_severity'} = \@::legal_severity;
-    $vars->{'op_sys'} = \@::legal_opsys;
-    $vars->{'bug_status'} = \@::legal_bug_status;
-
-    # Hack - this array contains "" for some reason. See bug 106589.
-    shift @::settable_resolution; 
-    $vars->{'resolution'} = \@::settable_resolution;
-
-    $vars->{'component_'} = $::components{$bug{'product'}};
-    $vars->{'version'} = $::versions{$bug{'product'}};
-    $vars->{'target_milestone'} = $::target_milestone{$bug{'product'}};
-    $bug{'milestoneurl'} = $::milestoneurl{$bug{'product'}} || 
-                           "notargetmilestone.html";
-
-    $vars->{'use_votes'} = $::prodmaxvotes{$bug{'product'}};
-
-    # Add additional, calculated fields to the bug hash
-    if (@::legal_keywords) {
-        $vars->{'use_keywords'} = 1;
-
-        SendSQL("SELECT keyworddefs.name 
-                 FROM keyworddefs, keywords
-                 WHERE keywords.bug_id = $id 
-                 AND keyworddefs.id = keywords.keywordid
-                 ORDER BY keyworddefs.name");
-        my @keywords;
-        while (MoreSQLData()) {
-            push(@keywords, FetchOneColumn());
-        }
-
-        $bug{'keywords'} = \@keywords;
-    }    
-
-    # Attachments
-    $bug{'attachments'} = Attachment::query($id);
-
-    # Dependencies
-    my @list;
-    SendSQL("SELECT dependson FROM dependencies WHERE  
-             blocked = $id ORDER BY dependson");
-    while (MoreSQLData()) {
-        my ($i) = FetchSQLData();
-        push(@list, $i);
-    }
-
-    $bug{'dependson'} = \@list;
-
-    my @list2;
-    SendSQL("SELECT blocked FROM dependencies WHERE  
-             dependson = $id ORDER BY blocked");
-    while (MoreSQLData()) {
-        my ($i) = FetchSQLData();
-        push(@list2, $i);
-    }
-
-    $bug{'blocked'} = \@list2;
-
-    # Groups
-    my @groups;
-    my (%buggroups, %usergroups);
-
-    # Find out if this bug is private to any group
-    SendSQL("SELECT group_id FROM bug_group_map WHERE bug_id = $id");
-    while (my $group_id = FetchOneColumn()) {
-        $buggroups{$group_id} = 1;
-    }
-
-    # Get a list of active groups the user is in, subject to the above conditions
-    if ($userid) {
-        # NB - the number of groups is likely to be small - should we just select
-        # everything, and weed manually? OTOH, the number of products is likely
-        # to be small, too. This buggroup stuff needs to be rethought
-        SendSQL("SELECT groups.group_id, groups.isactive " .
-                "FROM user_group_map, " .
-                "groups LEFT JOIN products ON groups.name = products.product " .
-                "WHERE groups.group_id = user_group_map.group_id AND " .
-                "user_group_map.user_id = $userid AND groups.isbuggroup != 0 AND " .
-                "(groups.name = " . SqlQuote($bug{'product'}) . " OR " .
-                "products.product IS NULL)");
-        while (my $group_id = FetchOneColumn()) {
-            $usergroups{$group_id} = 1;
-        }
-
-        # Now get information about each group
-        SendSQL("SELECT group_id, name, description " .
-                "FROM groups " .
-                # "WHERE group_id IN (" . join(',', @groups) . ") " .
-                "ORDER BY description");
-        while (MoreSQLData()) {
-            my ($group_id, $name, $description) = FetchSQLData();
-            my ($ison, $ingroup);
-    
-            if ($buggroups{$group_id} || 
-                ($usergroups{$group_id} && (($name eq $bug{'product'}) || 
-                                (!defined $::proddesc{$name})))) 
-            {
-                $user{'inallgroups'} &= $ingroup;
-
-                push (@groups, { "bit" => $group_id,
-                                 "ison" => $buggroups{$group_id},
-                                 "ingroup" => $usergroups{$group_id},
-                                 "description" => $description });
-            }
-        }
-
-        # If the bug is restricted to a group, display checkboxes that allow
-        # the user to set whether or not the reporter 
-        # and cc list can see the bug even if they are not members of all 
-        # groups to which the bug is restricted.
-        if (%buggroups) {
-            $bug{'inagroup'} = 1;
-
-            # Determine whether or not the bug is always accessible by the
-            # reporter, QA contact, and/or users on the cc: list.
-            SendSQL("SELECT reporter_accessible, cclist_accessible
-                     FROM   bugs
-                     WHERE  bug_id = $id
-                    ");
-            ($bug{'reporter_accessible'}, 
-             $bug{'cclist_accessible'}) = FetchSQLData();        
-        }
-    }
-    $vars->{'groups'} = \@groups;
-
-    my $movers = Param("movers");
-    $user{'canmove'} = Param("move-enabled") 
-                       && (defined $::COOKIE{"Bugzilla_login"}) 
-                       && ($::COOKIE{"Bugzilla_login"} =~ /\Q$movers\E/);
-
-    # User permissions
-
-    # In the below, if the person hasn't logged in ($userid == 0), then
-    # we treat them as if they can do anything.  That's because we don't
-    # know why they haven't logged in; it may just be because they don't
-    # use cookies.  Display everything as if they have all the permissions
-    # in the world; their permissions will get checked when they log in
-    # and actually try to make the change.
-    $user{'canedit'} = $userid == 0
-                       || $userid == $bug{'reporter'}
-                       || $userid == $bug{'qa_contact'}
-                       || $userid == $bug{'assigned_to'}
-                       || UserInGroup("editbugs");                   
-    $user{'canconfirm'} = ($userid == 0) || UserInGroup($userid, "canconfirm");
-
-    # Bug states
-    $bug{'isunconfirmed'} = ($bug{'bug_status'} eq $::unconfirmedstate);
-    $bug{'isopened'} = IsOpenedState($bug{'bug_status'});
-
-    # People involved with the bug
-    $bug{'assigned_to_email'} = DBID_to_name($bug{'assigned_to'});
-    $bug{'assigned_to'} = DBID_to_real_or_loginname($bug{'assigned_to'});
-    $bug{'reporter'} = DBID_to_real_or_loginname($bug{'reporter'});
-    $bug{'qa_contact'} = $bug{'qa_contact'} > 0 ? 
-                                          DBID_to_name($bug{'qa_contact'}) : "";
-
-    my $ccset = new RelationSet;
-    $ccset->mergeFromDB("SELECT who FROM cc WHERE bug_id=$id");
-    
-    my @cc = $ccset->toArrayOfStrings();
-    $bug{'cc'} = \@cc if $cc[0];
-
-    # Next bug in list (if there is one)
-    my @bug_list;
-    if ($::COOKIE{"BUGLIST"} && $id) 
-    {
-        @bug_list = split(/:/, $::COOKIE{"BUGLIST"});
-    }
-    $vars->{'bug_list'} = \@bug_list;
-
-    $bug{'comments'} = GetComments($bug{'bug_id'});
-
-    # This is length in number of comments
-    $bug{'longdesclength'} = scalar(@{$bug{'comments'}});
-
-    # Add the bug and user hashes to the variables
-    $vars->{'bug'} = \%bug;
-    $vars->{'user'} = \%user;
-
-    # Generate and return the UI (HTML page) from the appropriate template.
-    $template->process("bug/edit.html.tmpl", $vars)
-      || ThrowTemplateError($template->error());
-}
- 
-1;

mozilla/webtools/bugzilla/bug_status.html

@@ -1,206 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<HTML>
-
-<!--
-     The contents of this file are subject to the Mozilla Public
-     License Version 1.1 (the "License"); you may not use this file
-     except in compliance with the License. You may obtain a copy of
-     the License at http://www.mozilla.org/MPL/
-    
-     Software distributed under the License is distributed on an "AS
-     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-     implied. See the License for the specific language governing
-     rights and limitations under the License.
-    
-     The Original Code is the Bugzilla Bug Tracking System.
-    
-     The Initial Developer of the Original Code is Netscape Communications
-     Corporation. Portions created by Netscape are
-     Copyright (C) 1998 Netscape Communications Corporation. All
-     Rights Reserved.
-    
-     Contributor(s): 
-
-     Contributor(s): Terry Weissman <terry@mozilla.org>
--->
-
-<head>
-<TITLE>A Bug's Life Cycle</TITLE>
-<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-</head>
-<body>
-
-<h1 ALIGN=CENTER>A Bug's Life Cycle</h1>
-
-The <B>status</B> and <B>resolution</B> field define and track the
-life cycle of a bug.
-
-<a name="status"></a>
-<p>
-<TABLE BORDER=1 CELLPADDING=4>
-
-<TR ALIGN=CENTER VALIGN=TOP>
-<TD WIDTH="50%"><H1>STATUS</H1> <TD><H1>RESOLUTION</H1>
-
-<TR VALIGN=TOP>
-<TD>The <B>status</B> field indicates the general health of a bug. Only
-certain status transitions are allowed.
-<TD>The <b>resolution</b> field indicates what happened to this bug.
-
-<TR VALIGN=TOP><TD>
-<DL><DT><B>
-<A HREF="confirmhelp.html">UNCONFIRMED</A></B> 
-<DD> This bug has recently been added to the database.  Nobody has
-     validated that this bug is true.  Users who have the "canconfirm"
-     permission set may confirm this bug, changing its state to NEW.
-     Or, it may be directly resolved and marked RESOLVED.
-<DT><B>NEW</B> 
-<DD> This bug has recently been added to the assignee's list of bugs
-     and must be processed. Bugs in this state may be accepted, and
-     become <B>ASSIGNED</B>, passed on to someone else, and remain
-     <B>NEW</B>, or resolved and marked <B>RESOLVED</B>.
-<DT><B>ASSIGNED</B> 
-<DD> This bug is not yet resolved, but is assigned to the proper
-     person. From here bugs can be given to another person and become
-     <B>NEW</B>, or resolved and become <B>RESOLVED</B>.
-<DT><B>REOPENED</B>
-<DD>This bug was once resolved, but the resolution was deemed
-     incorrect.  For example, a <B>WORKSFORME</B> bug is
-     <B>REOPENED</B> when more information shows up and the bug is now
-     reproducible.  From here bugs are either marked <B>ASSIGNED</B>
-     or <B>RESOLVED</B>.
-</DL>
-<TD>
-<DL>
-<DD> No resolution yet. All bugs which are in one of these "open" states
-     have the resolution set to blank. All other bugs
-     will be marked with one of the following resolutions.
-</DL>
-
-<TR VALIGN=TOP><TD>
-<DL>
-<DT><B>RESOLVED</B> 
-<DD> A resolution has been taken, and it is awaiting verification by
-     QA. From here bugs are either re-opened and become
-     <B>REOPENED</B>, are marked <B>VERIFIED</B>, or are closed for good
-     and marked <B>CLOSED</B>.
-<DT><B>VERIFIED</B>
-<DD> QA has looked at the bug and the resolution and agrees that the
-     appropriate resolution has been taken.  Bugs remain in this state
-     until the product they were reported against actually ships, at
-     which point they become <B>CLOSED</B>.
-<DT><B>CLOSED</B> 
-<DD> The bug is considered dead, the resolution is correct. Any zombie
-     bugs who choose to walk the earth again must do so by becoming
-     <B>REOPENED</B>.
-</DL>
-
-<TD>
-<DL>
-<DT><B>FIXED</B>
-<DD> A fix for this bug is checked into the tree and tested.
-<DT><B>INVALID</B>
-<DD> The problem described is not a bug 
-<DT><B>WONTFIX</B>
-<DD> The problem described is a bug which will never be fixed.
-<DT><B>LATER</B>
-<DD> The problem described is a bug which will not be fixed in this
-     version of the product.
-<DT><B>REMIND</B>
-<DD> The problem described is a bug which will probably not be fixed in this
-     version of the product, but might still be.
-<DT><B>DUPLICATE</B>
-<DD> The problem is a duplicate of an existing bug. Marking a bug
-     duplicate requires the bug# of the duplicating bug and will at
-     least put that bug number in the description field.
-<DT><B>WORKSFORME</B>
-<DD> All attempts at reproducing this bug were futile, reading the
-     code produces no clues as to why this behavior would occur. If
-     more information appears later, please re-assign the bug, for
-     now, file it.
-</DL>
-</TABLE>
-
-<H1>Other Fields</H1>
-
-<table border=1 cellpadding=4><tr><td>
-<h2><a name="severity">Severity</a></h2>
-
-This field describes the impact of a bug.
-
-<p>
-<p>
- 
-<table>
-<tr><th>Blocker</th><td>Blocks development and/or testing work
-<tr><th>Critical</th><td>crashes, loss of data, severe memory leak 
-<tr><th>Major</th><td>major loss of function 
-<tr><th>Minor</th><td>minor loss of function, or other problem where easy workaround is present 
-<tr><th>Trivial</th><td>cosmetic problem like misspelled words or misaligned text 
-<tr><th>Enhancement</th><td>Request for enhancement
-</table> 
-
-</td><td>
-
-<h2><a name="priority">Priority</a></h2>
-
-This field describes the importance and order in which a bug should be
-fixed.  This field is utilized by the programmers/engineers to
-prioritize their work to be done.  The available priorities are:
-
-<p>
-<p>
-
-<table>
-<tr><th>P1</th><td>Most important
-<tr><th>P2</th><td>
-<tr><th>P3</th><td>
-<tr><th>P4</th><td>
-<tr><th>P5</th><td>Least important
-</table>
-</tr></table>
-
-<h2><a name="rep_platform">Platform</a></h2>
-This is the hardware platform against which the bug was reported.  Legal
-platforms include:
-
-<UL>
-<LI> All (happens on all platform; cross-platform bug)
-<LI> Macintosh
-<LI> PC
-<LI> Sun
-<LI> HP
-</UL>
-
-<b>Note:</b> Selecting the option "All" does not select bugs assigned against all platforms.  It
-merely selects bugs that <b>occur</b> on all platforms.
-
-<h2><a name="op_sys">Operating System</a></h2>
-This is the operating system against which the bug was reported.  Legal
-operating systems include:
-
-<UL>
-<LI> All (happens on all operating systems; cross-platform bug)
-<LI> Windows 95
-<LI> Mac System 8.0
-<LI> Linux
-</UL>
-
-Note that the operating system implies the platform, but not always.
-For example, Linux can run on PC and Macintosh and others.
-
-<h2><a name="assigned_to">Assigned To</a></h2>
-
-This is the person in charge of resolving the bug.  Every time this
-field changes, the status changes to <B>NEW</B> to make it easy to see
-which new bugs have appeared on a person's list.
-
-The default status for queries is set to NEW, ASSIGNED and REOPENED. When
-searching for bugs that have been resolved or verified, remember to set the
-status field appropriately. 
-
-<hr>
-<!-- hhmts start -->
-Last modified: Sun Apr 14 12:51:23 EST 2002
-<!-- hhmts end -->
-</body> </html>

mozilla/webtools/bugzilla/bugwritinghelp.html

@@ -1,392 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<html>
-<head>
-<meta http-equiv="content-type" content="text/html; charset=iso-8859-1">
-<title>Bug Writing Guidelines</title>
-</head>
-<body>
-<center>
-<h1>Bug Writing Guidelines</h1>
-</center>
-
-<h3>Why You Should Read This</h3>
-
-<blockquote>
-<p>Simply put, the more effectively you report a bug, the more
-likely an engineer will actually fix it.</p>
-
-<p>These guidelines are a general
-tutorial to teach novice and intermediate bug reporters how to compose effective bug reports. Not every sentence may precisely apply to
-your software project.</p>
-</blockquote>
-
-<h3>How to Write a Useful Bug Report</h3>
-
-<blockquote>
-<p>Useful bug reports are ones that get bugs fixed. A useful bug
-report normally has two qualities:</p>
-
-<ol>
-<li><b>Reproducible.</b> If an engineer can't see the bug herself to prove that it exists, she'll probably stamp your bug report "WORKSFORME" or "INVALID" and move on to the next bug. Every detail you can provide helps.<br>
-<br>
-</li>
-
-<li><b>Specific.</b> The quicker the engineer can isolate the bug
-to a specific area, the more likely she'll expediently fix it. 
-(If a programmer or tester has to decypher a bug, they may spend
-more time cursing the submitter than solving the problem.)
-<br>
-<br>
-[ <a href="#tips" name="Anchor">Tell Me More</a> ]
-</li>
-</ol>
-
-<p>Let's say the application you're testing is a web browser. You
-crash at foo.com, and want to write up a bug report:</p>
-
-<blockquote>
-<p><b>BAD:</b> "My browser crashed. I think I was on www.foo.com. I play golf with Bill Gates, so you better fix this problem, or I'll report you to him. By the way, your Back icon looks like a squashed rodent. UGGGLY. And my grandmother's home page is all messed up in your browser. Thx 4 UR help."
-</p>
-
-<p>
- <b>GOOD:</b> "I crashed each time I went to www.foo.com, using
-the 2002-02-25 build on a Windows 2000 system. I also
-rebooted into Linux, and reproduced this problem using the 2002-02-24
-Linux build.
-</p>
-
-<p>
- It again crashed each time upon drawing the Foo banner at the top
-of the page. I broke apart the page, and discovered that the
-following image link will crash the application reproducibly,
-unless you remove the "border=0" attribute:
-</p>
-
-<p>
- <tt>&lt;IMG SRC="http://www.foo.com/images/topics/topicfoos.gif"
-width="34" height="44" border="0" alt="News"&gt;</tt>
-</p>
-</blockquote>
-</blockquote>
-
-<h3>How to Enter your Useful Bug Report into Bugzilla:</h3>
-
-<blockquote>
-<p>Before you enter your bug, use Bugzilla's 
-<a href="query.cgi">search page</a> to determine whether the defect you've discovered is a known, already-reported bug. If your bug is the 37th duplicate of a known issue, you're more likely to annoy the engineer. (Annoyed
-engineers fix fewer bugs.)
-</p>
-
-<p>
-Next, be sure to reproduce your bug using a recent
-build. Engineers tend to be most interested in problems affecting
-the code base that they're actively working on. After all, the bug you're reporting
-may already be fixed.
-
-</p>
-
-<p>
- If you've discovered a new bug using a current build, report it in
-Bugzilla:
-</p>
-
-<ol>
-<li>From your Bugzilla main page, choose 
-"<a href="enter_bug.cgi">Enter a new bug</a>".</li>
-
-<li>Select the product that you've found a bug in.</li>
-
-<li>Enter your e-mail address, password, and press the "Login"
-button. (If you don't yet have a password, leave the password field empty, 
-and press the "E-mail me a password" button instead.
-You'll quickly receive an e-mail message with your password.)</li>
-</ol>
-
-<p>Now, fill out the form. Here's what it all means:</p>
-
-<p><b>Where did you find the bug?</b></p>
-
-<blockquote>
-<p><b>Product: In which product did you find the bug?</b><br>
- You just specified this on the last page, so you can't edit it here.</p>
-
-<p><b>Version: In which product version did you find the
-bug?</b><br>
- (If applicable)</p>
-
-<p><b>Component: In which component does the bug exist?</b><br>
-Bugzilla requires that you select a component to enter a bug. (Not sure which to choose? 
-Click on the Component link. You'll see a description of each component, to help you make the best choice.)</p>
-
-<p><b>OS: On which Operating System (OS) did you find this bug?</b>
-(e.g. Linux, Windows 2000, Mac OS 9.)<br>
- If you know the bug happens on all OSs, choose 'All'. Otherwise,
-select the OS that you found the bug on, or "Other" if your OS
-isn't listed.</p>
-</blockquote>
-
-<p><b>How important is the bug?</b></p>
-
-<blockquote>
-<p><b>Severity: How damaging is the bug?</b><br>
- This item defaults to 'normal'. If you're not sure what severity your bug deserves, click on the Severity link.
- You'll see a description of each severity rating. <br>
-</p>
-</blockquote>
-
-<p><b>Who will be following up on the bug?</b></p>
-
-<blockquote>
-<p><b>Assigned To: Which engineer should be responsible for fixing
-this bug?</b><br>
- Bugzilla will automatically assign the bug to a default engineer
-upon submitting a bug report. If you'd prefer to directly assign the bug to
-someone else, enter their e-mail address into this field. (To see the list of
-default engineers for each component, click on the Component
-link.)</p>
-
-<p><b>Cc: Who else should receive e-mail updates on changes to this
-bug?</b><br>
- List the full e-mail addresses of other individuals who should
-receive an e-mail update upon every change to the bug report. You
-can enter as many e-mail addresses as you'd like, separated by spaces or commas, as long as those
-people have Bugzilla accounts.</p>
-</blockquote>
-
-<p><b>What else can you tell the engineer about the bug?</b></p>
-
-<blockquote>
-
-<p><b>Summary:</b> <b>How would you describe the bug, in
-approximately 60 or fewer characters?</b><br>
- A good summary should <b>quickly and uniquely identify a bug
-report</b>. Otherwise, an engineer cannot meaningfully identify
-your bug by its summary, and will often fail to pay attention to
-your bug report when skimming through a 10 page bug list.<br>
-<br>
- A useful summary might be 
- "<tt>PCMCIA install fails on Tosh Tecra 780DVD w/ 3c589C</tt>". 
- "<tt>Software fails</tt>" or "<tt>install problem</tt>" would be
-examples of a bad summary.<br>
-<br>
- [ <a href="#summary">Tell Me More</a> ]<br>
-<br>
- <b>Description: </b><br>
- Please provide a detailed problem report in this field.
-Your bug's recipients will most likely expect the following information:</p>
-
-<blockquote>
-<p><b>Overview Description:</b> More detailed expansion of
-summary.</p>
-
-<blockquote>
-<pre>
-Drag-selecting any page crashes Mac builds in NSGetFactory
-</pre>
-</blockquote>
-
-<p><b>Steps to Reproduce:</b> Minimized, easy-to-follow steps that will
-trigger the bug. Include any special setup steps.</p>
-
-<blockquote>
-<pre>
-1) View any web page. (I used the default sample page,
-resource:/res/samples/test0.html)
-                          
-2) Drag-select the page. (Specifically, while holding down 
-the mouse button, drag the mouse pointer downwards from any 
-point in the browser's content region to the bottom of the 
-browser's content region.)                   
-</pre>
-</blockquote>
-
-<p>
- <b>Actual Results:</b> What the application did after performing
-the above steps. 
-</p>
-
-<blockquote>
-<pre>
-The application crashed. Stack crawl appended below from MacsBug.
-</pre>
-</blockquote>
-
-<p><b>Expected Results:</b> What the application should have done,
-were the bug not present.</p>
-
-<blockquote>
-<pre>
-The window should scroll downwards. Scrolled content should be selected. 
-(Or, at least, the application should not crash.)
-</pre>
-</blockquote>
-
-<p><b>Build Date &amp; Platform:</b> Date and platform of the build
-that you first encountered the bug in.</p>
-
-<blockquote>
-<pre>
-Build 2002-03-15 on Mac OS 9.0
-</pre>
-</blockquote>
-
-<p><b>Additional Builds and Platforms:</b> Whether or not the bug
-takes place on other platforms (or browsers, if applicable).</p>
-
-<blockquote>
-<pre>
-- Also Occurs On        
-    Mozilla (2002-03-15 build on Windows NT 4.0) 
-                                    
-- Doesn't Occur On        
-    Mozilla (2002-03-15 build on Red Hat Linux; feature not supported)        
-    Internet Explorer 5.0 (shipping build on Windows NT 4.0)        
-    Netscape Communicator 4.5 (shipping build on Mac OS 9.0)
-</pre>
-</blockquote>
-
-<p><b>Additional Information:</b> Any other debugging information.
-For crashing bugs:</p>
-
-<ul>
-<li><b>Win32:</b> if you receive a Dr. Watson error, please note
-the type of the crash, and the module that the application crashed
-in. (e.g. access violation in apprunner.exe)</li>
-
-<li><b>Mac OS:</b> if you're running MacsBug, please provide the
-results of a <b>how</b> and an <b>sc</b>:</li>
-</ul>
-
-<blockquote>
-<pre>
-*** MACSBUG STACK CRAWL OF CRASH (Mac OS)
-Calling chain using A6/R1 links 
-    Back chain  ISA  Caller 
-    00000000    PPC  0BA85E74   
-    03AEFD80    PPC  0B742248   
-    03AEFD30    PPC  0B50FDDC  NSGetFactory+027FC
-PowerPC unmapped memory exception at 0B512BD0 NSGetFactory+055F0
-</pre>
-</blockquote>
-</blockquote>
-</blockquote>
-
-<p>You're done!<br>
-<br>
- After double-checking your entries for any possible errors, press
-the "Commit" button, and your bug report will now be in the
-Bugzilla database.<br>
-</p>
-</blockquote>
-
-<hr>
-<h3>More Information on Writing Good Bugs</h3>
-
-<blockquote>
-<p><b><a name="tips"></a> 1. General Tips for a Useful Bug
-Report</b>
-</p>
-
-<blockquote>
-<p>
- <b>Use an explicit structure, so your bug reports are easy to
-skim.</b> Bug report users often need immediate access to specific
-sections of your bug. If your Bugzilla installation supports the
-Bugzilla Helper, use it.
-</p>
-
-<p>
- <b>Avoid cuteness if it costs clarity.</b> Nobody will be laughing
-at your funny bug title at 3:00 AM when they can't remember how to
-find your bug.
-</p>
-
-<p>
- <b>One bug per report.</b> Completely different people typically
-fix, verify, and prioritize different bugs. If you mix a handful of
-bugs into a single report, the right people probably won't discover
-your bugs in a timely fashion, or at all. Certain bugs are also
-more important than others. It's impossible to prioritize a bug
-report when it contains four different issues, all of differing
-importance.
-</p>
-
-<p>
- <b>No bug is too trivial to report.</b> Unless you're reading the
-source code, you can't see actual software bugs, like a dangling
-pointer -- you'll see their visible manifestations, such as the
-segfault when the application finally crashes. Severe software
-problems can manifest themselves in superficially trivial ways.
-File them anyway.<br>
-</p>
-</blockquote>
-
-<p><b><a name="summary"></a>2. How and Why to Write Good Bug Summaries</b>
-</p>
-
-<blockquote>
-<p><b>You want to make a good first impression on the bug
-recipient.</b> Just like a New York Times headline guides readers
-towards a relevant article from dozens of choices, will your bug summary
-suggest that your bug report is worth reading from dozens or hundreds of
-choices?
-</p>
-
-<p>
- Conversely, a vague bug summary like <tt>install problem</tt> forces anyone
-reviewing installation bugs to waste time opening up your bug to
-determine whether it matters.
-</p>
-
-<p>
- <b>Your bug will often be searched by its summary.</b> Just as
-you'd find web pages with Google by searching by keywords through
-intuition, so will other people locate your bugs. Descriptive bug
-summaries are naturally keyword-rich, and easier to find.
-</p>
-
-<p>
- For example, you'll find a bug titled "<tt>Dragging icons from List View to
-gnome-terminal doesn't paste path</tt>" if you search on "List",
-"terminal", or "path". Those search keywords wouldn't have found a
-bug titled "<tt>Dragging icons
-doesn't paste</tt>".
-</p>
-
-<p>
- Ask yourself, "Would someone understand my bug from just this
-summary?" If so, you've written a fine summary.
-</p>
-
-<p><b>Don't write titles like these:</b></p>
-
-<ol>
- <li>"Can't install" - Why can't you install? What happens when you
-try to install?</li>
-<li>"Severe Performance Problems" - ...and they occur when you do
-what?</li>
-<li>"back button does not work" - Ever? At all?</li>
-</ol>
-
-<p><b>Good bug titles:</b></p>
-<ol>
-<li>"1.0 upgrade installation fails if Mozilla M18 package present"
-- Explains problem and the context.</li>
-<li>"RPM 4 installer crashes if launched on Red Hat 6.2 (RPM 3)
-system" - Explains what happens, and the context.</li>
-</ol>
-
-
-
-</blockquote>
-</blockquote>
-
-<p>(Written and maintained by 
-<a href="http://www.prometheus-music.com/eli">Eli Goldberg</a>. Claudius
-Gayle, Gervase Markham, Peter Mock, Chris Pratt, Tom Schutter and Chris Yeh also
-contributed significant changes. Constructive 
-<a href="mailto:eli@prometheus-music.com">suggestions</a> welcome.)</p>
-
-</body>
-</html>
-

mozilla/webtools/bugzilla/bugzilla.dtd

@@ -1,46 +0,0 @@
-<!ELEMENT bugzilla (bug+)>
-<!ATTLIST bugzilla
-	version CDATA #REQUIRED
-	urlbase CDATA #REQUIRED
-	maintainer CDATA #REQUIRED
-	exporter CDATA #IMPLIED
->
-<!ELEMENT bug (bug_id, (bug_status, product, priority, version, rep_platform, assigned_to, delta_ts, component, reporter, target_milestone?, bug_severity, creation_ts, qa_contact?, op_sys, resolution?, bug_file_loc?, short_desc?, keywords*, status_whiteboard?, dependson*, blocks*, cc*, long_desc*, attachment*)?)>
-<!ATTLIST bug
-	error (NotFound | NotPermitted | InvalidBugId) #IMPLIED
->
-<!ELEMENT bug_id (#PCDATA)>
-<!ELEMENT exporter (#PCDATA)>
-<!ELEMENT urlbase (#PCDATA)>
-<!ELEMENT bug_status (#PCDATA)>
-<!ELEMENT product (#PCDATA)>
-<!ELEMENT priority (#PCDATA)>
-<!ELEMENT version (#PCDATA)>
-<!ELEMENT rep_platform (#PCDATA)>
-<!ELEMENT assigned_to (#PCDATA)>
-<!ELEMENT delta_ts (#PCDATA)>
-<!ELEMENT component (#PCDATA)>
-<!ELEMENT reporter (#PCDATA)>
-<!ELEMENT target_milestone (#PCDATA)>
-<!ELEMENT bug_severity (#PCDATA)>
-<!ELEMENT creation_ts (#PCDATA)>
-<!ELEMENT qa_contact (#PCDATA)>
-<!ELEMENT status_whiteboard (#PCDATA)>
-<!ELEMENT op_sys (#PCDATA)>
-<!ELEMENT resolution (#PCDATA)>
-<!ELEMENT bug_file_loc (#PCDATA)>
-<!ELEMENT short_desc (#PCDATA)>
-<!ELEMENT keywords (#PCDATA)>
-<!ELEMENT dependson (#PCDATA)>
-<!ELEMENT blocks (#PCDATA)>
-<!ELEMENT cc (#PCDATA)>
-<!ELEMENT long_desc (who, bug_when, thetext)>
-<!ELEMENT who (#PCDATA)>
-<!ELEMENT bug_when (#PCDATA)>
-<!ELEMENT thetext (#PCDATA)>
-<!ELEMENT attachment (attachid, date, desc, type?, data?)>
-<!ELEMENT attachid (#PCDATA)>
-<!ELEMENT date (#PCDATA)>
-<!ELEMENT desc (#PCDATA)>
-<!ELEMENT type (#PCDATA)>
-<!ELEMENT data (#PCDATA)>

mozilla/webtools/bugzilla/changepassword.cgi

@@ -1,39 +0,0 @@
-#!/usr/bonsaitools/bin/perl -wT
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-
-use strict;
-
-print q{Content-type: text/html
-
-<HTML>
-<HEAD>
-<META HTTP-EQUIV="Refresh"
-  CONTENT="0; URL=userprefs.cgi">
-</HEAD>
-<BODY>
-This URL is obsolete.  Forwarding you to the correct one.
-<P>
-Going to <A HREF="userprefs.cgi">userprefs.cgi</A>
-<BR>
-</BODY>
-</HTML>
-}

mozilla/webtools/bugzilla/colchange.cgi

@@ -1,156 +0,0 @@
-#!/usr/bonsaitools/bin/perl -wT
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-
-use diagnostics;
-use strict;
-
-use lib qw(.);
-
-use vars qw(
-  @legal_keywords
-  $buffer
-  $template
-  $vars
-);
-
-require "CGI.pl";
-
-# Use the template toolkit (http://www.template-toolkit.org/) to generate
-# the user interface (HTML pages and mail messages) using templates in the
-# "template/" subdirectory.
-use Template;
-
-# Create the global template object that processes templates and specify
-# configuration parameters that apply to all templates processed in this script.
-my $template = Template->new(
-{
-    # Colon-separated list of directories containing templates.
-    INCLUDE_PATH => "template/custom:template/default",
-    # Allow templates to be specified with relative paths.
-    RELATIVE => 1,
-    PRE_CHOMP => 1,
-});
-
-# Define the global variables and functions that will be passed to the UI 
-# template.  Individual functions add their own values to this hash before
-# sending them to the templates they process.
-my $vars = 
-{
-    # Function for retrieving global parameters.
-    'Param' => \&Param, 
-
-    # Function for processing global parameters that contain references
-    # to other global parameters.
-    'PerformSubsts' => \&PerformSubsts,
-
-    # Function to search an array for a value   
-    'lsearch' => \&lsearch,
-};
-
-print "Content-type: text/html\n";
-
-# The master list not only says what fields are possible, but what order
-# they get displayed in.
-
-ConnectToDatabase();
-GetVersionTable();
-
-my @masterlist = ("opendate", "changeddate", "severity", "priority",
-                  "platform", "owner", "reporter", "status", "resolution",
-                  "product", "component", "version", "os", "votes");
-
-if (Param("usetargetmilestone")) {
-    push(@masterlist, "target_milestone");
-}
-if (Param("useqacontact")) {
-    push(@masterlist, "qa_contact");
-}
-if (Param("usestatuswhiteboard")) {
-    push(@masterlist, "status_whiteboard");
-}
-if (@::legal_keywords) {
-    push(@masterlist, "keywords");
-}
-
-
-push(@masterlist, ("summary", "summaryfull"));
-
-$vars->{masterlist} = \@masterlist;
-
-my @collist;
-if (defined $::FORM{'rememberedquery'}) {
-    my $splitheader = 0;
-    if (defined $::FORM{'resetit'}) {
-        @collist = @::default_column_list;
-    } else {
-        foreach my $i (@masterlist) {
-            if (defined $::FORM{"column_$i"}) {
-                push @collist, $i;
-            }
-        }
-        if (exists $::FORM{'splitheader'}) {
-            $splitheader = $::FORM{'splitheader'};
-        }
-    }
-    my $list = join(" ", @collist);
-    my $urlbase = Param("urlbase");
-    my $cookiepath = Param("cookiepath");
-    print "Set-Cookie: COLUMNLIST=$list ; path=$cookiepath ; expires=Sun, 30-Jun-2029 00:00:00 GMT\n";
-    print "Set-Cookie: SPLITHEADER=$::FORM{'splitheader'} ; path=$cookiepath ; expires=Sun, 30-Jun-2029 00:00:00 GMT\n";
-    print "Refresh: 0; URL=buglist.cgi?$::FORM{'rememberedquery'}\n";
-    print "\n";
-    print "<META HTTP-EQUIV=Refresh CONTENT=\"1; URL=$urlbase"."buglist.cgi?$::FORM{'rememberedquery'}\">\n";
-    print "<TITLE>What a hack.</TITLE>\n";
-    PutHeader ("Change columns");
-    print "Resubmitting your query with new columns...\n";
-    exit;
-}
-
-if (defined $::COOKIE{'COLUMNLIST'}) {
-    @collist = split(/ /, $::COOKIE{'COLUMNLIST'});
-} else {
-    @collist = @::default_column_list;
-}
-
-$vars->{collist} = \@collist;
-
-$vars->{splitheader} = 0;
-if ($::COOKIE{'SPLITHEADER'}) {
-    $vars->{splitheader} = 1;
-}
-
-my %desc = ();
-foreach my $i (@masterlist) {
-    $desc{$i} = $i;
-}
-
-$desc{'summary'} = "Summary (first 60 characters)";
-$desc{'summaryfull'} = "Full Summary";
-
-$vars->{desc} = \%desc;
-$vars->{buffer} = $::buffer;
-
-# Generate and return the UI (HTML page) from the appropriate template.
-print "Content-type: text/html\n\n";
-$template->process("list/change-columns.html.tmpl", $vars)
-  || ThrowTemplateError($template->error());
-

mozilla/webtools/bugzilla/collectstats.pl

@@ -1,202 +0,0 @@
-#!/usr/bonsaitools/bin/perl -w
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>,
-#                 Harrison Page <harrison@netscape.com>
-#         Gervase Markham <gerv@gerv.net>
-
-# Run me out of cron at midnight to collect Bugzilla statistics.
-
-
-use AnyDBM_File;
-use diagnostics;
-use strict;
-use vars @::legal_product;
-
-require "globals.pl";
-
-# tidy up after graphing module
-if (chdir("graphs")) {
-    unlink <./*.gif>;
-    unlink <./*.png>;
-    chdir("..");
-}
-
-ConnectToDatabase(1);
-GetVersionTable();
-
-my @myproducts;
-push( @myproducts, "-All-", @::legal_product );
-
-foreach (@myproducts) {
-    my $dir = "data/mining";
-
-    &check_data_dir ($dir);
-    &collect_stats ($dir, $_);
-}
-
-&calculate_dupes();
-
-sub check_data_dir {
-    my $dir = shift;
-
-    if (! -d) {
-        mkdir $dir, 0777;
-        chmod 0777, $dir;
-    }
-}
-
-sub collect_stats {
-    my $dir = shift;
-    my $product = shift;
-    my $when = localtime (time);
-
-    # NB: Need to mangle the product for the filename, but use the real
-    # product name in the query
-    my $file_product = $product;
-    $file_product =~ s/\//-/gs;
-    my $file = join '/', $dir, $file_product;
-    my $exists = -f $file;
-
-    if (open DATA, ">>$file") {
-        push my @row, &today;
-
-        foreach my $status ('NEW', 'ASSIGNED', 'REOPENED', 'UNCONFIRMED', 'RESOLVED', 'VERIFIED', 'CLOSED') {
-            if( $product eq "-All-" ) {
-                SendSQL("select count(bug_status) from bugs where bug_status='$status'");
-            } else {
-                SendSQL("select count(bug_status) from bugs where bug_status='$status' and product='$product'");
-            }
-
-            push @row, FetchOneColumn();
-        }
-
-        foreach my $resolution ('FIXED', 'INVALID', 'WONTFIX', 'LATER', 'REMIND', 'DUPLICATE', 'WORKSFORME', 'MOVED') {
-            if( $product eq "-All-" ) {
-                SendSQL("select count(resolution) from bugs where resolution='$resolution'");
-            } else {
-                SendSQL("select count(resolution) from bugs where resolution='$resolution' and product='$product'");
-            }
-
-            push @row, FetchOneColumn();
-        }
-
-        if (! $exists) {
-            print DATA <<FIN;
-# Bugzilla Daily Bug Stats
-#
-# Do not edit me! This file is generated.
-#
-# fields: DATE|NEW|ASSIGNED|REOPENED|UNCONFIRMED|RESOLVED|VERIFIED|CLOSED|FIXED|INVALID|WONTFIX|LATER|REMIND|DUPLICATE|WORKSFORME|MOVED
-# Product: $product
-# Created: $when
-FIN
-        }
-
-        print DATA (join '|', @row) . "\n";
-        close DATA;
-    } else {
-        print "$0: $file, $!";
-    }
-}
-
-sub calculate_dupes {
-    SendSQL("SELECT * FROM duplicates");
-
-    my %dupes;
-    my %count;
-    my @row;
-    my $key;
-    my $changed = 1;
-
-    my $today = &today_dash;
-
-    # Save % count here in a date-named file
-    # so we can read it back in to do changed counters
-    # First, delete it if it exists, so we don't add to the contents of an old file
-    if (my @files = <data/duplicates/dupes$today*>) {
-        unlink @files;
-    }
-   
-    dbmopen(%count, "data/duplicates/dupes$today", 0644) || die "Can't open DBM dupes file: $!";
-
-    # Create a hash with key "a bug number", value "bug which that bug is a
-    # direct dupe of" - straight from the duplicates table.
-    while (@row = FetchSQLData()) {
-        my $dupe_of = shift @row;
-        my $dupe = shift @row;
-        $dupes{$dupe} = $dupe_of;
-    }
-
-    # Total up the number of bugs which are dupes of a given bug
-    # count will then have key = "bug number", 
-    # value = "number of immediate dupes of that bug".
-    foreach $key (keys(%dupes)) 
-    {
-        my $dupe_of = $dupes{$key};
-
-        if (!defined($count{$dupe_of})) {
-            $count{$dupe_of} = 0;
-        }
-
-        $count{$dupe_of}++;
-    }   
-
-    # Now we collapse the dupe tree by iterating over %count until
-    # there is no further change.
-    while ($changed == 1)
-    {
-        $changed = 0;
-        foreach $key (keys(%count)) {
-            # if this bug is actually itself a dupe, and has a count...
-            if (defined($dupes{$key}) && $count{$key} > 0) {
-                # add that count onto the bug it is a dupe of,
-                # and zero the count; the check is to avoid
-                # loops
-                if ($count{$dupes{$key}} != 0) {
-                    $count{$dupes{$key}} += $count{$key};
-                    $count{$key} = 0;
-                    $changed = 1;
-                }
-            }
-        }
-    }
-
-    # Remove the values for which the count is zero
-    foreach $key (keys(%count))
-    {
-        if ($count{$key} == 0) {
-            delete $count{$key};
-        }
-    }
-   
-    dbmclose(%count);
-}
-
-sub today {
-    my ($dom, $mon, $year) = (localtime(time))[3, 4, 5];
-    return sprintf "%04d%02d%02d", 1900 + $year, ++$mon, $dom;
-}
-
-sub today_dash {
-    my ($dom, $mon, $year) = (localtime(time))[3, 4, 5];
-    return sprintf "%04d-%02d-%02d", 1900 + $year, ++$mon, $dom;
-}
-

mozilla/webtools/bugzilla/confirmhelp.html

@@ -1,168 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
-<html><head>
-
-<!--
-     The contents of this file are subject to the Mozilla Public
-     License Version 1.1 (the "License"); you may not use this file
-     except in compliance with the License. You may obtain a copy of
-     the License at http://www.mozilla.org/MPL/
-    
-     Software distributed under the License is distributed on an "AS
-     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-     implied. See the License for the specific language governing
-     rights and limitations under the License.
-    
-     The Original Code is the Bugzilla Bug Tracking System.
-    
-     The Initial Developer of the Original Code is Netscape Communications
-     Corporation. Portions created by Netscape are
-     Copyright (C) 2000 Netscape Communications Corporation. All
-     Rights Reserved.
-    
-     Contributor(s): Terry Weissman <terry@mozilla.org>
--->
-
-<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-<title>Understanding the UNCONFIRMED state, and other recent changes</title>
-</head>
-
-<body>
-<h1>Understanding the UNCONFIRMED state, and other recent changes</h1>
-
-<p>
-[This document is aimed primarily at people who have used Bugzilla
-before the UNCONFIRMED state was implemented.  It might be helpful for
-newer users as well.]
-</p>
-
-<p>
-
-New bugs in some products will now show up in a new state,
-UNCONFIRMED.  This means that we have nobody has confirmed that the
-bug is real.  Very busy engineers will probably generally ignore
-UNCONFIRMED that have been assigned to them, until they have been
-confirmed in one way or another.  (Engineers with more time will
-hopefully glance over their UNCONFIRMED bugs regularly.)
-</p>
-
-<p>
-The <a href="bug_status.html">page describing bug fields</a> has been
-updated to include UNCONFIRMED.
-</p>
-
-<p>
-There are two basic ways that a bug can become confirmed (and enter
-the NEW) state.
-</p>
-
-<ul>
-  <li> A user with the appropriate permissions (see below for more on
-       permissions) decides that the bug is a valid one, and confirms
-       it.  We hope to gather a small army of responsible volunteers
-       to regularly go through bugs for us.</li>
-  <li> The bug gathers a certain number of votes. <b>Any</b> valid Bugzilla user may vote for 
-bugs (each user gets a certain number of bugs); any UNCONFIRMED bug which 
-gets enough votes becomes automatically confirmed, and enters the NEW state.</li>
-</ul>
-
-<p>
-One implication of this is that it is worth your time to search the
-bug system for duplicates of your bug to vote on them, before
-submitting your own bug.  If we can spread around knowledge of this
-fact, it ought to help cut down the number of duplicate bugs in the
-system. 
-</p>
-
-<h2>Permissions.</h2>
-
-<p>
-Users now have a certain set of permissions.  To see your permissions,
-check out the
-<a href="userprefs.cgi?bank=permissions">user preferences</a> page.
-</p>
-
-<p>
-If you have the "Can confirm a bug" permission, then you will be able
-to move UNCONFIRMED bugs into the NEW state.
-</p>
-
-<p>
-If you have the "Can edit all aspects of any bug" permission, then you
-can tweak anything about any bug.  If not, you may only edit those
-bugs that you have submitted, or that you have assigned to you (or
-qa-assigned to you).  However, anyone may add a comment to any bug.
-</p>
-
-<p>
-Some people (initially, the initial owners and initial qa-contacts for
-components in the system) have the ability to give the above two
-permissions to other people.  So, if you really feel that you ought to
-have one of these permissions, a good person to ask (via private
-email, please!) is the person who is assigned a relevant bug.
-</p>
-
-<h2>Other details.</h2>
-
-<p>
-An initial stab was taken to decide who would be given which of the
-above permissions.  This was determined by some simple heurstics of
-who was assigned bugs, and who the default owners of bugs were, and a
-look at people who seem to have submitted several bugs that appear to
-have been interesting and valid.  Inevitably, we have failed to give
-someone the permissions they deserve.  Please don't take it
-personally; just bear with us as we shake out the new system.
-</p>
-
-<p>
-People with one of the two bits above can easily confirm their own
-bugs, so bugs they submit will actually start out in the NEW state.
-They can override this when submitting a bug.
-</p>
-
-<p>
-People can ACCEPT or RESOLVE a bug assigned to them, even if they
-aren't allowed to confirm it.  However, the system remembers, and if
-the bug gets REOPENED or reassigned to someone else, it will revert
-back to the UNCONFIRMED state.  If the bug has ever been confirmed,
-then REOPENing or reassigning will cause it to go to the NEW or
-REOPENED state.
-</p>
-
-<p>
-Note that only some products support the UNCONFIRMED state.  In other
-products, all new bugs will automatically start in the NEW state.
-</p>
-
-<h2>Things still to be done.</h2>
-
-<p>
-There probably ought to be a way to get a bug back into the
-UNCONFIRMED state, but there isn't yet.
-</p>
-
-<p>
-If a person has submitted several bugs that get confirmed, then this
-is probably a person who understands the system well, and deserves the
-"Can confirm a bug" permission.  This kind of person should be
-detected and promoted automatically.
-</p>
-
-<p>
-There should also be a way to automatically promote people to get the
-"Can edit all aspects of any bug" permission.
-</p>
-
-<p>
-The "enter a new bug" page needs to be revamped with easy ways for new
-people to educate themselves on the benefit of searching for a bug
-like the one they're about to submit and voting on it, rather than
-adding a new useless duplicate.
-</p>
-
-<hr>
-<p>
-<!-- hhmts start -->
-Last modified: Sun Apr 14 12:55:14 EST 2002
-<!-- hhmts end -->
-</p>
-</body> </html>

mozilla/webtools/bugzilla/contrib/BugzillaEmail.pm

@@ -1,79 +0,0 @@
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# This code is based on code found in bug_email.pl from the bugzilla
-# email tracker.  Initial contributors are :: 
-#                 Terry Weissman <terry@mozilla.org>
-#                 Gregor Fischer <fischer@suse.de>
-#                 Klaas Freitag  <freitag@suse.de>
-#                 Seth Landsman  <seth@dworkin.net>
-
-# The purpose of this module is to abstract out a bunch of the code
-#  that is central to email interfaces to bugzilla and its database
-
-# Contributor : Seth Landsman <seth@dworkin.net>
-
-# Initial checkin : 03/15/00 (SML)
-#  findUser() function moved from bug_email.pl to here
-
-push @INC, "../."; # this script now lives in contrib
-
-require "globals.pl";
-
-use diagnostics;
-use strict;
-
-my $EMAIL_TRANSFORM_NONE = "email_transform_none";
-my $EMAIL_TRANSFORM_BASE_DOMAIN = "email_transform_base_domain";
-my $EMAIL_TRANSFORM_NAME_ONLY = "email_transform_name_only";
-
-# change to do incoming email address fuzzy matching
-my $email_transform = $EMAIL_TRANSFORM_NAME_ONLY;
-
-# findUser()
-# This function takes an email address and returns the user email.
-# matching is sloppy based on the $email_transform parameter
-sub findUser($) {
-  my ($address) = @_;
-  # if $email_transform is $EMAIL_TRANSFORM_NONE, return the address, otherwise, return undef
-  if ($email_transform eq $EMAIL_TRANSFORM_NONE) {
-    my $stmt = "SELECT login_name FROM profiles WHERE profiles.login_name = \'$address\';";
-    SendSQL($stmt);
-    my $found_address = FetchOneColumn();
-    return $found_address;
-  } elsif ($email_transform eq $EMAIL_TRANSFORM_BASE_DOMAIN) {
-    my ($username) = ($address =~ /(.+)@/);
-    my $stmt = "SELECT login_name FROM profiles WHERE profiles.login_name RLIKE \'$username\';";
-    SendSQL($stmt);
-
-    my $domain;
-    my $found = undef;
-    my $found_address;
-    my $new_address = undef;
-    while ((!$found) && ($found_address = FetchOneColumn())) {
-      ($domain) = ($found_address =~ /.+@(.+)/);
-      if ($address =~ /$domain/) {
-        $found = 1;
-        $new_address = $found_address;
-      }
-    }
-    return $new_address;
-  } elsif ($email_transform eq $EMAIL_TRANSFORM_NAME_ONLY) {
-    my ($username) = ($address =~ /(.+)@/);
-    my $stmt = "SELECT login_name FROM profiles WHERE profiles.login_name RLIKE \'$username\';";
-    SendSQL($stmt);
-    my $found_address = FetchOneColumn();
-    return $found_address;
-  }
-}
-
-1;

mozilla/webtools/bugzilla/contrib/README

@@ -1,22 +0,0 @@
-This directory contains contributed software related to Bugzilla.
-Things in here have not necessarily been tested or tried by anyone
-except the original contributor, so tred carefully.  But it may still
-be useful to you.
-
-This directory includes:
-
-  mysqld-watcher.pl --  This script can be installed as a frequent cron 
-                        job to clean up stalled/dead queries.
-        gnats2bz.pl --  A perl script to help import bugs from a GNATS 
-                        database into a Bugzilla database.  Contributed by
-                        Tom Schutter <tom@platte.com>
-
-       bug_email.pl --  A perl script that can receive email containing
-                        bug reports (email-interface). Contributed by
-                        Klaas Freitag <freitag@SuSE.de>
-	
-      README.Mailif --  Readme describing the mail interface.
-  bugmail_help.html --  User help page for the mail interface.
-
-       yp_nomail.sh --  Script you can run via cron that regularly updates
-                        the nomail file for terminated employees 

mozilla/webtools/bugzilla/contrib/README.Mailif

@@ -1,80 +0,0 @@
-
-The Bugzilla Mail interface
-===========================
-
-(UPDATE 03/14/00 to better reflect reality by SML)
-
-The Bugzilla Mail interface allows to submit bugs to Bugzilla by email.
-
-The Mail Interface Contribution consists of three files:
-README.Mailif - this readme.
-bug_email.pl  - the script
-bugmail_help.html - a user help html site
-
-Installation:
-
-Next is to add a user who receives the bugmails, e. g. bugmail. Create a 
-mail account and a home directory for the user. 
-
-The mailinterface script bug_email.pl needs to get the mail through stdin.
-I use procmail for that, with the following line in the .procmailrc:
-
-BUGZILLA_HOME=/usr/local/httpd/htdocs/bugzilla
-:0 c
-|(cd $BUGZILLA_HOME/contrib; ./bug_email.pl)
-
-This defines the Bugzilla directory as the variable BUGZILLA_HOME and passes
-all incoming mail to the script after cd'ing into the bugzilla home.
-
-In some cases, it is necessary to alter the headers of incoming email.  The 
-additional line to procmail :
-
-:0 fhw
-| formail -I "From " -a "From "
-
-fixes many problems.
-
-See bugzilla.procmailrc for a sample procmailrc that works for me (SML) and
-also deals with bugzilla_email_append.pl
-
-Customation:
-
-There are some values inside the script which need to be customized for your
-needs:
-
-1. In sub-routine Reply (search 'sub Reply':
-there is the line
-    print MAIL "From: Bugzilla Mailinterface<yourmail\@here.com>\n";
-                                            ^^^^^^^^^^^^^^^^^^^^
-Fill in your correct mail here. That will make it easy for people to reply
-to the mail.
-
-2. check, if your sendmail resides in /usr/sbin/sendmail, change the path if neccessary.
-Search the script after 'default' - you find some default-Settings for bug
-reports, which are used, if the sender did not send a field for it. The defaults
-should be checked and changed.
-
-Thats hopefully all, we will come up with any configuration file or something.
-
-
-If your mail works, your script will insert mails from now on.
-
-The mailinterface supports two commandline switches:
-
-There are two command line switches :
-
--t: Testmode
-    The mailinterface does not really insert the bug into the database, but
-    writes some debug output to stdout and writes the mail into the file
-    bug_email_test.log in the data-dir.
-
--r: restricted mode
-    All lines before the first line with a keyword character are skipped.
-    In not restricted, default mode, these lines are added to the long 
-    description of the bug.
-
-
-02/2000 - Klaas Freitag, SuSE GmbH <freitag@suse.de>
-03/2000 - Seth M. Landsman <seth@cs.brandeis.edu>
- bug_email.pl now lives out of bugzilla/contrib
- added line about formail

mozilla/webtools/bugzilla/contrib/bugmail_help.html

@@ -1,223 +0,0 @@
-<HTML>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
-<!--
-     The contents of this file are subject to the Mozilla Public
-     License Version 1.1 (the "License"); you may not use this file
-     except in compliance with the License. You may obtain a copy of
-     the License at http://www.mozilla.org/MPL/
-    
-     Software distributed under the License is distributed on an "AS
-     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-     implied. See the License for the specific language governing
-     rights and limitations under the License.
-    
-     The Original Code is the Bugzilla Bug Tracking System.
-    
-     Contributor(s): Klaas Freitag <Freitag@SuSE.de>
--->
-
-<HEAD> <TITLE>Bugzilla Mail Interface</TITLE> </HEAD>
-<BODY BGCOLOR="#FFFFFF">
-<CENTER><H1>The Bugzilla Mail Interface</H1>
-Contributor: <A HREF="mailto:freitag@suse.de">Klaas Freitag</A>, SuSE GmbH 
-</CENTER>
-<P>
-The bugzilla Mail interface allows the registered bugzilla users to submit bugs by 
-sending email with a bug description. This is usefull for people, who do not work 
-inhouse and want to submitt bugs to the bugzilla system.
-<p>
-
-
-I know, show me the <A HREF="#examplemail">example-mail !</A>
-
-
-<H2>What do you need to do to submitt a bug by mail ?</H2>
-You need to send a email in the described format to the bugmail-user of the 
-bugzilla-system. This is <A HREF="mailto:our_bugzilla@xyz.com">yourbugzilla@here.com</A>
-
-You receive a reply mail with the new bug-ID if your request was ok. 
-If not, you get a mail with 
-some help on the bugmail system and a specific analysis of your request.
-<P>
-Please dont refuse to send one or two wrong mails, you will get all the information 
-you need in the replies, and <I>only</I> in the mail replies. The information on this
-page, concerning available products, versions and so on, is not dynamicly generated and 
-may  be old therefore.
-
-<H1>The Mail Format</H1>
-The bugmail needs a special format , which consists of some keywords and suitable 
-values for them and a description text. Note that the keyword block needs to be
-above of the description text.
-
-<H2>Keywords</H2>
-You need to tell bugzilla some properties of the bugs. This is done by keywords, which
-start on a new line with a @, followed by the keyword and and equal-sign, followed by a
-hopefully valid value.
-
-
-<TABLE BORDER=4 FRAME=box CELLSPACING="5" width=95%> <COLGROUP> <col width="2*"> 
-<col width="5*"> <col width="1*"> </COLGROUP>
-	<TR>
-		<TH>Keyword</TH>
-		<TH>Value description</TH>
-		<TH>required and default value</TH>
-	</TR>
-	<TR>
-	        <TD>@product</TD>
-	        <TD>The product which has a bug</TD>
-	        <TD>yes. <br> This is the most important information. Many other
-		fields depend on the product.</TD>
-	</TR>
-	<TR>
-	        <TD>@component</TD>
-	        <TD>the desired component which is affected by the bug</TD>
-	        <TD>yes. <br> As the @product, this is a very important 
-		field.</TD>
-	</TR>
-	<TR>
-	        <TD>@version</TD>
-	        <TD>The version of the product</TD>
-	        <TD>yes. <br>See @product and @component</TD>
-	</TR>
-	<TR>
-	        <TD>@short_desc</TD>
-	        <TD>A summary of your bug report</TD>
-	        <TD>yes. <br>This summary of the error you want to report 
-		describes what happen. You may skip the long description,
-		but not this summary.<br>
-		<b>Note:</b>The short description may be given in the mail subject
-		instead of using the keyword !</TD>
-	</TR>
-	<TR>
-	        <TD>@rep_platform</TD>
-	        <TD>The desired platform</TD>
-	        <TD>no.<br>If you dont give a value, this field is set to <I>All</I>.</TD>
-	</TR>
-	<TR>
-	        <TD>@bug_severity</TD>
-	        <TD>The severity of the bug</TD>
-	        <TD>no. <br> If you dont give a value, this field is set to 
-		<I>normal</I></TD>
-	</TR>
-	<TR>
-	        <TD>@priority</TD>
-	        <TD>The priority of the bug</TD>
-	        <TD>no.<br>If you dont give a value, this field is set to <I>P3</I></TD>
-	</TR>
-	<TR>
-	        <TD>@op_sys</TD>
-	        <TD>The operating system</TD>
-	        <TD>no.<br>If you dont give a value, this field is set to <I>Linux</I>.</TD>
-	</TR>
-	<TR>
-	        <TD>@assigned_to</TD>
-	        <TD>The one to whom the bug is assigned to</TD>
-	        <TD>no. <br>There is an initial owner for every product/version/component.
-		He owns the bug by default. The initial owner can only be found if 
-		product, version and component are valid.</TD>
-	</TR>
-	<TR>
-	        <TD>@bug_file_loc</TD>
-	        <TD>?</TD>
-	        <TD>no.</TD>
-	</TR>
-	<TR>
-	        <TD>@status_whiteboard</TD>
-	        <TD>?</TD>
-	        <TD>no.</TD>
-	</TR>
-	<TR>
-	        <TD>@target_milestone</TD>
-	        <TD>?</TD>
-	        <TD>no.</TD>
-	</TR>
-	<TR>
-	        <TD>@groupset</TD>
-	        <TD>rules the visibility of the bug.</TD>
-	        <TD>no.<br>This value defaults to the smallest of the available groups,
-		which is <I>readInternal</I>.</TD>
-	</TR>
-	<TR>
-	        <TD>@qa_contact</TD>
-	        <TD>the quality manager for the product</TD>
-	        <TD>no.<br>This value can be retrieved from product, component and 
-		version</TD>
-	</TR>
-
-</TABLE>
-<H2>Valid values</H2>
-Give string values for the most keys above. Some keywords  require special values:<br>
-<ol>
-<li>E-Mail adresses: If you want to set the qa-contact, specify a email-adress for @qa_contact. The email must be known by bugzilla of course.</li>
-<li>Listvalues: Most of the values have to be one of a list of valid values. Try by sending
-a mail and read the reply. Skip fields if you dont get help for them unless you dont know
-which values you may choose.</li>
-<li>free Text: The descriptions may be free text. </li>
-<li>Special: The field groupset may be specified in different in three different kinds:
- <ol>
-    <li> A plain numeric way, which is one usually huge number, e. g. <I>65536</I></li>
-    <li> a string with added numbers e.g. <I>65536+131072</I></li>
-    <li> a string list, e.g. <I>ReadInternal, ReadBeta </I></li>
- </ol>
-</li>
-</ol>
-
-<p>
-
-But most of them need <b>valid</b> values.
-<p>
-Sorry, you will not find lists of valid products, components and the other stuff
-here. Send a mail to with any text, and you will get a list of valid keywords in the reply.
-
-<p>
-Some of the values must be choosen from a list:<br>
-<ol>
-  <li>bug_severity: blocker, critical, major, normal, minor, trivial, enhancement</li>
-  <li>op_sys: Linux </li>
-  <li>priority: P1, P2, P3, P4, P5</li>
-  <li>rep_platform: All, i386, AXP, i686, Other</li></ol>
-  
-
-<p>
-
-After you have specified the required keywords and maybe some other value, you may 
-describe your bug. You dont need  a keyword for starting your bug description. All 
-text which follows the keyword block is handled as long description of the bug.
-<p>
-
-The bugmail interface is able to find required information by itself. E.g. if you specify
-a product which has exactly one component, this component will be found by the interface
-automatically. 
-
-<H1>Attachments</H1>
-
-The mail interface is able to cope with MIME-attachments. 
-People could for example add a logfile as a mail attachment, and it will appear in 
-bugzilla as attachment. A comment for the attachment should be added, it will describe
-the attachment in bugzilla.
-
-<H1><A NAME="examplemail">Example Mail</A></H1>
-
-See the example of the mail <b>body</b> (Dont forget to specify the short description
-in the mail subject):<hr><pre>
-
-  @product      = Bugzilla
-  @component    = general
-  @version      = All
-  @groupset     = ReadWorld ReadPartners
-  @op_sys       = Linux
-  @priority     = P3
-  @rep_platform = i386
-
-
-  This is the description of the bug I found. It is not neccessary to start
-  it with a keyword. 
-
-  Note: The short_description is neccessary and may be given with the keyword
-  @short_description or will be retrieved from the mail subject.
-
-
-</pre><hr>
-
-</BODY>
-</HTML>

mozilla/webtools/bugzilla/contrib/bugzilla.procmailrc

@@ -1,30 +0,0 @@
-:0 fhw
-| formail -I "From " -a "From "
-
-BUGZILLA_HOME=/home/bugzilla/WEB/bugzilla/contrib
-
-:0
-* ^Subject: .*\[Bug .*\]
-RESULT=|(cd $BUGZILLA_HOME && ./bugzilla_email_append.pl)
-
-
-# Feed mail to stdin of bug_email.pl
-:0 Ec
-#* !^Subject: .*[Bug .*]
-RESULT=|(cd $BUGZILLA_HOME && ./bug_email.pl )
-
-# write result to a logfile
-:0 c
-|echo `date '+%d.%m.%y %H:%M:  '` $RESULT >> $HOME/bug_email.log
-
-
-:0 c
-|echo "----------------------------------" >> $HOME/bug_email.log
-
-:0 c
-$HOME/bug_email.log
- 
-# Move mail to the inbox
-:0
-$HOME/Mail/INBOX
-

mozilla/webtools/bugzilla/contrib/bugzilla_email_append.pl

@@ -1,189 +0,0 @@
-#!/usr/bin/perl -w
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-
-# The purpose of this script is to take an email message, which
-# specifies a bugid and append it to the bug as part of the longdesc
-# table
-
-# Contributor : Seth M. Landsman <seth@dworkin.net>
-
-# 03/15/00 : Initial version by SML
-# 03/15/00 : processmail gets called
-
-# Email subject must be of format :
-# .* Bug ### .*
-# replying to a typical bugzilla email should be valid
-
-# TODO : 
-# 1. better way to get the body text (I don't know what dump_entity() is 
-#   actually doing
-
-use diagnostics;
-use strict;
-use MIME::Parser;
-
-push @INC, "../."; # this script lives in contrib
-require "globals.pl";
-require "BugzillaEmail.pm";
-
-# Create a new MIME parser:
-my $parser = new MIME::Parser;
-
-my $Comment = "";
-
-# Create and set the output directory:
-# FIXME: There should be a $BUGZILLA_HOME variable (SML)
-(-d "../data/mimedump-tmp") or mkdir "../data/mimedump-tmp",0755 or die "mkdir: $!";
-(-w "../data/mimedump-tmp") or die "can't write to directory";
-
-$parser->output_dir("../data/mimedump-tmp");
-    
-# Read the MIME message:
-my $entity = $parser->read(\*STDIN) or die "couldn't parse MIME stream";
-$entity->remove_sig(10);          # Removes the signature in the last 10 lines
-
-# Getting values from parsed mail
-my $Sender = $entity->get( 'From' );
-$Sender ||=  $entity->get( 'Reply-To' );
-my $Message_ID = $entity->get( 'Message-Id' );
-
-die (" *** Cant find Sender-adress in sent mail ! ***\n" ) unless defined( $Sender );
-chomp( $Sender );
-chomp( $Message_ID );
-
-print "Dealing with the sender $Sender\n";
-
-ConnectToDatabase();
-
-my $SenderShort = $Sender;
-$SenderShort =~ s/^.*?([a-zA-Z0-9_.-]+?\@[a-zA-Z0-9_.-]+\.[a-zA-Z0-9_.-]+).*$/$1/;
-
-$SenderShort = findUser($SenderShort);
-
-print "SenderShort is $SenderShort\n";
-if (!defined($SenderShort)) {
-  $SenderShort = $Sender;
-  $SenderShort =~ s/^.*?([a-zA-Z0-9_.-]+?\@[a-zA-Z0-9_.-]+\.[a-zA-Z0-9_.-]+).*$/$1/;
-}
-print "The sendershort is now $SenderShort\n";
-
-if (!defined($SenderShort)) {
-  DealWithError("No such user $SenderShort exists.");
-}
-
-my $Subject = $entity->get('Subject');
-print "The subject is $Subject\n";
-
-my ($bugid) = ($Subject =~ /\[Bug ([\d]+)\]/);
-print "The bugid is $bugid\n";
-
-# make sure the bug exists
-
-SendSQL("SELECT bug_id FROM bugs WHERE bug_id = $bugid;");
-my $found_id = FetchOneColumn();
-print "Did we find the bug? $found_id-\n";
-if (!defined($found_id)) {
-  DealWithError("Bug $bugid does not exist");
-}
-
-# get the user id
-SendSQL("SELECT userid FROM profiles WHERE login_name = \'$SenderShort\';");
-my $userid = FetchOneColumn();
-if (!defined($userid)) {
-  DealWithError("Userid not found for $SenderShort");
-}
-
-# parse out the text of the message
-dump_entity($entity);
-
-# Get rid of the bug id
-$Subject =~ s/\[Bug [\d]+\]//;
-#my $Comment = "This is only a test ...";
-my $Body = "Subject: " . $Subject . "\n" . $Comment;
-
-# shove it in the table
-my $long_desc_query = "INSERT INTO longdescs SET bug_id=$found_id, who=$userid, bug_when=NOW(), thetext=" . SqlQuote($Body) . ";";
-SendSQL($long_desc_query);
-
-system("cd .. ; ./processmail $found_id '$SenderShort'");
-
-sub DealWithError {
-  my ($reason) = @_;
-  print $reason . "\n";
-}
-
-# Yanking this wholesale from bug_email, 'cause I know this works.  I'll
-#  figure out what it really does later
-#------------------------------
-#
-# dump_entity ENTITY, NAME
-#
-# Recursive routine for parsing a mime coded mail.
-# One mail may contain more than one mime blocks, which need to be
-# handled. Therefore, this function is called recursively.
-#
-# It gets the for bugzilla important information from the mailbody and 
-# stores them into the global attachment-list @attachments. The attachment-list
-# is needed in storeAttachments.
-#
-sub dump_entity {
-    my ($entity, $name) = @_;
-    defined($name) or $name = "'anonymous'";
-    my $IO;
-
-
-    # Output the body:
-    my @parts = $entity->parts;
-    if (@parts) {                     # multipart...
-	my $i;
-	foreach $i (0 .. $#parts) {       # dump each part...
-	    dump_entity($parts[$i], ("$name, part ".(1+$i)));
-	}
-    } else {                            # single part...	
-
-	# Get MIME type, and display accordingly...
-	my $msg_part = $entity->head->get( 'Content-Disposition' );
-	
-	$msg_part ||= ""; 
-
-	my ($type, $subtype) = split('/', $entity->head->mime_type);
-	my $body = $entity->bodyhandle;
-	my ($data, $on_disk );
-
-	if(  $msg_part =~ /^attachment/ ) {
-	    # Attached File
-	    my $des = $entity->head->get('Content-Description');
-	    $des ||= "";
-
-	    if( defined( $body->path )) { # Data is on disk
-		$on_disk = 1;
-		$data = $body->path;
-		
-	    } else {                      # Data is in core
-		$on_disk = 0;
-		$data = $body->as_string;
-	    }
-#	    push ( @attachments, [ $data, $entity->head->mime_type, $on_disk, $des ] );
-	} else {
-	    # Real Message
-	    if ($type =~ /^(text|message)$/) {     # text: display it...
-		if ($IO = $body->open("r")) {
-		    $Comment .=  $_ while (defined($_ = $IO->getline));
-		    $IO->close;
-		} else {       # d'oh!
-		    print "$0: couldn't find/open '$name': $!";
-		}
-	    } else { print "Oooops - no Body !\n"; }
-	}
-    }
-}

mozilla/webtools/bugzilla/contrib/cmdline/buglist

@@ -1,94 +0,0 @@
-#!/bin/sh
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is 
-# Andreas Franke <afranke@ags.uni-sb.de>.
-# Corporation. Portions created by Andreas Franke are
-# Copyright (C) 2001 Andreas Franke. All
-# Rights Reserved.
-#
-# Contributor(s): 
-
-conf="`dirname $0`/query.conf"
-
-query="http://bugzilla.mozilla.org/buglist.cgi?cmd=doit"
-defaultcolumnlist="severity priority platform status resolution target_milestone status_whiteboard keywords summaryfull"
-
-chart=0
-and=0
-while test "$1" != ""; do
-    arg=$1
-    arg_len=`expr length ${arg}`
-    if test `expr substr "${arg}" 1 2` == "--"; then
-        eq_pos=`expr match ${arg} '--.*='`
-        if test "${eq_pos}" == "0"; then
-            echo 'Missing value for long option '"${arg}"' ("=" not found)' 1>&2
-            exit 1;
-        fi
-        # extract option name
-        let name_len=${eq_pos}-3
-        name=`expr substr ${arg} 3 ${name_len}`
-        # extract option value
-        let val_start=${eq_pos}+1
-        let val_len=${arg_len}-${eq_pos}
-        val=`expr substr ${arg} ${val_start} ${val_len}`
-    elif test `expr substr ${arg} 1 1` == "-" &&
-         test "`expr substr ${arg} 2 1`" != ""; then
-        # extract
-        name=`expr substr ${arg} 2 1`
-        let val_len=${arg_len}-2
-        val=`expr substr ${arg} 3 ${val_len}`
-    else
-        name="default"
-        val="${arg}"
-        #echo "Unrecognized option ${arg}" 1>&2
-        #exit 1
-    fi
-
-    # find field and comparison type for option ${name}
-    field=`grep '"'${name}'"' ${conf} | awk '{printf $1}'`
-    type=`grep '"'${name}'"' ${conf} | awk '{printf $2}'`
-    if test "${field}" == ""  || test "${type}" == ""; then
-        echo "Field name & comparison type not found for option ${name}." 1>&2
-        exit 1;
-    fi
-
-    or=0
-    while test "${val}" != ""; do
-        comma_idx=`expr index ${val} ,`
-        if test ${comma_idx} == "0"; then
-            val1="${val}"
-            val=""
-        else
-            let val1_len=${comma_idx}-1
-            val1=`expr substr ${val} 1 ${val1_len}`
-            val_len=`expr length ${val}`
-            let rest_start=${comma_idx}+1
-            let rest_len=${val_len}-${comma_idx}
-            val=`expr substr ${val} ${rest_start} ${rest_len}`
-        fi
-        query="${query}&field${chart}-${and}-${or}=${field}"
-        query="${query}&type${chart}-${and}-${or}=${type}"
-        query="${query}&value${chart}-${and}-${or}=${val1}"
-        #echo "----- ${name} : ${field} : ${type} : ${val1} -----" 1>&2
-        let or=${or}+1
-    done
-    let chart=${chart}+1
-    shift
-done
-
-outputfile="/dev/stdout"
-#outputfile="buglist.html"
-#\rm -f ${outputfile}
-wget -q -O ${outputfile} --header="Cookie: COLUMNLIST=${COLUMNLIST-${defaultcolumnlist}}" "${query}"
-

mozilla/webtools/bugzilla/contrib/cmdline/bugs

@@ -1,31 +0,0 @@
-#!/bin/sh
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is 
-# Andreas Franke <afranke@ags.uni-sb.de>.
-# Corporation. Portions created by Andreas Franke are
-# Copyright (C) 2001 Andreas Franke. All
-# Rights Reserved.
-#
-# Contributor(s): 
-
-buglist="`dirname $0`/buglist"
-htmlfile="`dirname $0`/buglist.html"
-
-${buglist} "$@" 2>&1 1>${htmlfile}
-if test ${?} == "0"; then
-    echo `grep 'TR VALIGN=TOP ALIGN=LEFT CLASS=' ${htmlfile} | sed -e 's/<TR.*id=//' | sed -e 's/".*//'` | sed -e 's/ /\,/g'
-else
-    cat ${htmlfile} 1>&2
-    exit 1
-fi

mozilla/webtools/bugzilla/contrib/cmdline/query.conf

@@ -1,49 +0,0 @@
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is 
-# Andreas Franke <afranke@ags.uni-sb.de>.
-# Corporation. Portions created by Andreas Franke are
-# Copyright (C) 2001 Andreas Franke. All
-# Rights Reserved.
-#
-# Contributor(s): 
-
-#
-# This is `query.conf', the config file for `buglist'.
-#
-# Columns: 1: field_name, 2: comparison_type, 3: cmd-line options
-#
-bug_status              substring       "s","status"
-resolution              substring       "r","resolution"
-rep_platform            substring       "p","platform"
-op_sys                  substring       "o","os","opsys"
-priority                substring       "p","priority"
-bug_severity            substring       "S","severity"
-assigned_to             substring       "A","O","owner","assignedto"
-reporter                substring       "R","reporter"
-qa_contact              substring       "Q","qa","qacontact"
-cc                      substring       "C","cc"
-product                 substring       "product"
-version                 substring       "V","version"
-component               substring       "c","component"
-target_milestone        substring       "M","milestone"
-short_desc              substring       "default","summary"
-longdesc                substring       "d","description","longdesc"
-bug_file_loc            substring       "u","url"
-status_whiteboard       substring       "w","whiteboard"
-keywords                substring       "k","K","keywords"
-attachments.description substring       "attachdesc"
-attachments.thedata     substring       "attachdata"
-attachments.mimetype    substring       "attachmime"
-dependson               substring       # bug 30823
-blocked                 substring       # bug 30823

mozilla/webtools/bugzilla/contrib/cvs-update.sh

@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Dawn Endico <endico@mozilla.org>
-
-
-# Keep a record of all cvs updates made from a given directory.
-#
-# Later, if changes need to be backed out, look at the log file
-# and run the cvs command with the date that you want to back
-# out to. (Probably the second to last entry).
-
-#DATE=`date +%e/%m/%Y\ %k:%M:%S\ %Z`
-DATE=`date`
-COMMAND="cvs update -d -P -D" 
-echo $COMMAND \"$DATE\" >> cvs-update.log
-$COMMAND "$DATE"
-
-
-# sample log file
-#cvs update -P -D "11/04/2000 20:22:08 PDT"
-#cvs update -P -D "11/05/2000 20:22:22 PDT"
-#cvs update -P -D "11/07/2000 20:26:29 PDT"
-#cvs update -P -D "11/08/2000 20:27:10 PDT"