updating branch

git-svn-id: svn://10.0.0.236/branches/JUD_CATEGORY_MGR_BRANCH@88548 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/netwerk/build/nsNetModule.cpp

@@ -0,0 +1,824 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+#include "nsCOMPtr.h"
+#include "nsIModule.h"
+#include "nsIGenericFactory.h"
+#include "nsIComponentManager.h"
+#include "nsIServiceManager.h"
+#include "nsICategoryManager.h"
+#include "nsIOService.h"
+#include "nsNetModuleMgr.h"
+#include "nsFileTransportService.h"
+#include "nsSocketTransportService.h"
+#include "nsSocketProviderService.h"
+#include "nscore.h"
+#include "nsStdURLParser.h"
+#include "nsAuthURLParser.h"
+#include "nsNoAuthURLParser.h"
+#include "nsStdURL.h"
+#include "nsSimpleURI.h"
+#include "nsDnsService.h"
+#include "nsLoadGroup.h"
+#include "nsInputStreamChannel.h"
+#include "nsStreamLoader.h"
+#include "nsDownloader.h"
+#include "nsAsyncStreamListener.h"
+//#include "nsSyncStreamListener.h"
+#include "nsFileStreams.h"
+#include "nsBufferedStreams.h"
+#include "nsProtocolProxyService.h"
+#include "nsSOCKSSocketProvider.h"
+
+#include "nsNetCID.h"
+
+///////////////////////////////////////////////////////////////////////////////
+
+#include "nsStreamConverterService.h"
+
+///////////////////////////////////////////////////////////////////////////////
+
+#include "nsINetDataCache.h"
+#include "nsINetDataCacheManager.h"
+#include "nsMemCacheCID.h"
+#include "nsMemCache.h"
+#include "nsNetDiskCache.h"
+#include "nsNetDiskCacheCID.h"
+#include "nsCacheManager.h"
+
+// Factory method to create a new nsMemCache instance.  Used
+// by nsNetDataCacheModule
+NS_GENERIC_FACTORY_CONSTRUCTOR_INIT(nsMemCache, Init)
+NS_GENERIC_FACTORY_CONSTRUCTOR_INIT(nsNetDiskCache, Init)
+NS_GENERIC_FACTORY_CONSTRUCTOR_INIT(nsCacheManager, Init)
+
+///////////////////////////////////////////////////////////////////////////////
+
+#include "nsMIMEService.h"
+#include "nsXMLMIMEDataSource.h"
+#include "nsMIMEInfoImpl.h"
+
+NS_GENERIC_FACTORY_CONSTRUCTOR(nsMIMEInfoImpl)
+
+///////////////////////////////////////////////////////////////////////////////
+
+#include "nsStreamObserverProxy.h"
+#include "nsStreamListenerProxy.h"
+#include "nsStreamProviderProxy.h"
+#include "nsSimpleStreamListener.h"
+#include "nsSimpleStreamProvider.h"
+
+NS_GENERIC_FACTORY_CONSTRUCTOR(nsStreamObserverProxy)
+NS_GENERIC_FACTORY_CONSTRUCTOR(nsStreamListenerProxy)
+NS_GENERIC_FACTORY_CONSTRUCTOR(nsStreamProviderProxy)
+NS_GENERIC_FACTORY_CONSTRUCTOR(nsSimpleStreamListener)
+NS_GENERIC_FACTORY_CONSTRUCTOR(nsSimpleStreamProvider)
+
+///////////////////////////////////////////////////////////////////////////////
+
+#include "nsStorageTransport.h"
+
+NS_GENERIC_FACTORY_CONSTRUCTOR(nsStorageTransport)
+
+///////////////////////////////////////////////////////////////////////////////
+
+#include "nsIHTTPProtocolHandler.h"
+#include "nsHTTPHandler.h"
+#include "nsHTTPSHandler.h"
+#include "nsBasicAuth.h"
+
+NS_GENERIC_FACTORY_CONSTRUCTOR_INIT(nsHTTPHandler, Init);
+//NS_GENERIC_FACTORY_CONSTRUCTOR(nsHTTPSHandler);
+
+#define NS_HTTPS_HANDLER_FACTORY_CID { 0xd2771480, 0xcac4, 0x11d3, { 0x8c, 0xaf, 0x0, 0x0, 0x64, 0x65, 0x73, 0x74 } }
+
+NS_GENERIC_FACTORY_CONSTRUCTOR(nsBasicAuth);
+#define NS_BASICAUTH_CID { 0xd5c9bc48, 0x1dd1, 0x11b2, { 0x9a, 0x0b, 0xf7, 0x3f, 0x59, 0x53, 0x19, 0xae } }
+#define NS_BASICAUTH_CONTRACTID "@mozilla.org/network/http-basic-auth;1"
+
+/* XXX this should all be data-driven, via NS_IMPL_GETMODULE_WITH_CATEGORIES */
+static NS_METHOD
+RegisterBasicAuth(nsIComponentManager *aCompMgr, nsIFile *aPath,
+                  const char *registryLocation, const char *componentType)
+{
+    nsresult rv;
+    nsCOMPtr<nsICategoryManager> catman =
+        do_GetService(NS_CATEGORYMANAGER_CONTRACTID, &rv);
+    if (NS_FAILED(rv)) return rv;
+    nsXPIDLCString previous;
+    return catman->AddCategoryEntry("http-auth", "basic", NS_BASICAUTH_CONTRACTID,
+                                    PR_TRUE, PR_TRUE, getter_Copies(previous));
+}
+
+static NS_METHOD
+UnregisterBasicAuth(nsIComponentManager *aCompMgr, nsIFile *aPath,
+                    const char *registryLocation)
+{
+    nsresult rv;
+    nsCOMPtr<nsICategoryManager> catman =
+        do_GetService(NS_CATEGORYMANAGER_CONTRACTID, &rv);
+    if (NS_FAILED(rv)) return rv;
+    nsXPIDLCString basicAuth;
+    rv = catman->GetCategoryEntry("http-auth", "basic",
+                                  getter_Copies(basicAuth));
+    if (NS_FAILED(rv)) return rv;
+    
+    // only unregister if we're the current Basic-auth handler
+    if (!strcmp(basicAuth, NS_BASICAUTH_CONTRACTID))
+        return catman->DeleteCategoryEntry("http-auth", "basic", PR_TRUE,
+                                           getter_Copies(basicAuth));
+    return NS_OK;
+}
+///////////////////////////////////////////////////////////////////////////////
+
+#include "nsFileChannel.h"
+#include "nsFileProtocolHandler.h"
+#include "nsDataHandler.h"
+#include "nsJARProtocolHandler.h"
+#include "nsResProtocolHandler.h"
+
+#include "nsAboutProtocolHandler.h"
+#include "nsAboutBlank.h"
+#include "nsAboutBloat.h"
+#include "nsAboutCache.h"
+#include "nsAboutCredits.h"
+#include "nsAboutPlugins.h"
+#include "mzAboutMozilla.h"
+#include "nsKeywordProtocolHandler.h"
+
+///////////////////////////////////////////////////////////////////////////////
+
+#include "nsFTPDirListingConv.h"
+#include "nsMultiMixedConv.h"
+#include "nsHTTPChunkConv.h"
+#include "nsHTTPCompressConv.h"
+#include "mozTXTToHTMLConv.h"
+#include "nsUnknownDecoder.h"
+#include "nsTXTToHTMLConv.h"
+
+nsresult NS_NewFTPDirListingConv(nsFTPDirListingConv** result);
+nsresult NS_NewMultiMixedConv (nsMultiMixedConv** result);
+nsresult MOZ_NewTXTToHTMLConv (mozTXTToHTMLConv** result);
+nsresult NS_NewHTTPChunkConv  (nsHTTPChunkConv ** result);
+nsresult NS_NewHTTPCompressConv  (nsHTTPCompressConv ** result);
+nsresult NS_NewNSTXTToHTMLConv(nsTXTToHTMLConv** result);
+nsresult NS_NewStreamConv(nsStreamConverterService **aStreamConv);
+
+#define FTP_UNIX_TO_INDEX            "?from=text/ftp-dir-unix&to=application/http-index-format"
+#define FTP_NT_TO_INDEX              "?from=text/ftp-dir-nt&to=application/http-index-format"
+#define MULTI_MIXED_X                "?from=multipart/x-mixed-replace&to=*/*"
+#define MULTI_MIXED                  "?from=multipart/mixed&to=*/*"
+#define UNKNOWN_CONTENT              "?from=application/x-unknown-content-type&to=*/*"
+#define CHUNKED_TO_UNCHUNKED         "?from=chunked&to=unchunked"
+#define UNCHUNKED_TO_CHUNKED         "?from=unchunked&to=chunked"
+#define GZIP_TO_UNCOMPRESSED         "?from=gzip&to=uncompressed"
+#define XGZIP_TO_UNCOMPRESSED        "?from=x-gzip&to=uncompressed"
+#define COMPRESS_TO_UNCOMPRESSED     "?from=compress&to=uncompressed"
+#define XCOMPRESS_TO_UNCOMPRESSED    "?from=x-compress&to=uncompressed"
+#define DEFLATE_TO_UNCOMPRESSED      "?from=deflate&to=uncompressed"
+#define PLAIN_TO_HTML                "?from=text/plain&to=text/html"
+
+static PRUint32 g_StreamConverterCount = 13;
+
+static char *g_StreamConverterArray[] = {
+        FTP_UNIX_TO_INDEX,
+        FTP_NT_TO_INDEX,
+        MULTI_MIXED_X,
+        MULTI_MIXED,
+        UNKNOWN_CONTENT,
+        CHUNKED_TO_UNCHUNKED,
+        UNCHUNKED_TO_CHUNKED,
+        GZIP_TO_UNCOMPRESSED,
+        XGZIP_TO_UNCOMPRESSED,
+        COMPRESS_TO_UNCOMPRESSED,
+        XCOMPRESS_TO_UNCOMPRESSED,
+        DEFLATE_TO_UNCOMPRESSED,
+        PLAIN_TO_HTML
+    };
+
+// each stream converter must add its from/to key to the category manager
+// in RegisterStreamConverters(). This provides a string representation
+// of each registered converter, rooted in the NS_ISTREAMCONVERTER_KEY
+// category. These keys are then (when the stream converter service
+// needs to chain converters together) enumerated and parsed to build
+// a graph of converters for potential chaining.
+static NS_METHOD
+RegisterStreamConverters(nsIComponentManager *aCompMgr, nsIFile *aPath,
+                         const char *registryLocation, const char *componentType) {
+    nsresult rv;
+    nsCOMPtr<nsICategoryManager> catmgr =
+        do_GetService(NS_CATEGORYMANAGER_CONTRACTID, &rv);
+    if (NS_FAILED(rv)) return rv;
+    nsXPIDLCString previous;
+
+    PRUint32 count = 0;
+    while (count++ < g_StreamConverterCount) {
+        rv = catmgr->AddCategoryEntry(NS_ISTREAMCONVERTER_KEY, g_StreamConverterArray[count],
+                                      nsnull, PR_TRUE, PR_TRUE, getter_Copies(previous));
+        if (NS_FAILED(rv)) return rv;
+         NS_ASSERTION(!previous, "someone already registered this converter at startup");
+    }
+    
+    return rv;
+}
+
+// same as RegisterStreamConverters except the reverse.
+static NS_METHOD
+UnregisterStreamConverters(nsIComponentManager *aCompMgr, nsIFile *aPath,
+                           const char *registryLocation) {
+    nsresult rv;
+    nsCOMPtr<nsICategoryManager> catmgr =
+        do_GetService(NS_CATEGORYMANAGER_CONTRACTID, &rv);
+    if (NS_FAILED(rv)) return rv;
+
+    nsXPIDLCString entry;
+
+    PRUint32 count = 0;
+    while (count++ < g_StreamConverterCount) {
+        rv = catmgr->DeleteCategoryEntry(NS_ISTREAMCONVERTER_KEY, g_StreamConverterArray[count],
+                                         PR_TRUE, getter_Copies(entry));
+        if (NS_FAILED(rv)) return rv;
+        NS_ASSERTION(entry, "deleting an entry that doesn't exist");
+    }
+    return rv;
+}
+
+static NS_IMETHODIMP                 
+CreateNewStreamConvServiceFactory(nsISupports* aOuter, REFNSIID aIID, void **aResult) 
+{
+    if (!aResult) {                                                  
+        return NS_ERROR_INVALID_POINTER;                             
+    }
+    if (aOuter) {                                                    
+        *aResult = nsnull;                                           
+        return NS_ERROR_NO_AGGREGATION;                              
+    }   
+    nsStreamConverterService* inst = nsnull;
+    nsresult rv = NS_NewStreamConv(&inst);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+        return rv;                                                   
+    } 
+    rv = inst->QueryInterface(aIID, aResult);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+    }                                                                
+    NS_RELEASE(inst);             /* get rid of extra refcnt */      
+    return rv;              
+}
+
+static NS_IMETHODIMP                 
+CreateNewFTPDirListingConv(nsISupports* aOuter, REFNSIID aIID, void **aResult) 
+{
+    if (!aResult) {                                                  
+        return NS_ERROR_INVALID_POINTER;                             
+    }
+    if (aOuter) {                                                    
+        *aResult = nsnull;                                           
+        return NS_ERROR_NO_AGGREGATION;                              
+    }   
+    nsFTPDirListingConv* inst = nsnull;
+    nsresult rv = NS_NewFTPDirListingConv(&inst);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+        return rv;                                                   
+    } 
+    rv = inst->QueryInterface(aIID, aResult);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+    }                                                                
+    NS_RELEASE(inst);             /* get rid of extra refcnt */      
+    return rv;              
+}
+
+static NS_IMETHODIMP                 
+CreateNewMultiMixedConvFactory(nsISupports* aOuter, REFNSIID aIID, void **aResult) 
+{
+    if (!aResult) {                                                  
+        return NS_ERROR_INVALID_POINTER;                             
+    }
+    if (aOuter) {                                                    
+        *aResult = nsnull;                                           
+        return NS_ERROR_NO_AGGREGATION;                              
+    }   
+    nsMultiMixedConv* inst = nsnull;
+    nsresult rv = NS_NewMultiMixedConv(&inst);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+        return rv;                                                   
+    } 
+    rv = inst->QueryInterface(aIID, aResult);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+    }                                                                
+    NS_RELEASE(inst);             /* get rid of extra refcnt */      
+    return rv;              
+}
+
+static NS_IMETHODIMP                 
+CreateNewTXTToHTMLConvFactory(nsISupports* aOuter, REFNSIID aIID, void **aResult) 
+{
+    if (!aResult) {                                                  
+        return NS_ERROR_INVALID_POINTER;                             
+    }
+    if (aOuter) {                                                    
+        *aResult = nsnull;                                           
+        return NS_ERROR_NO_AGGREGATION;                              
+    }   
+    mozTXTToHTMLConv* inst = nsnull;
+    nsresult rv = MOZ_NewTXTToHTMLConv(&inst);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+        return rv;                                                   
+    } 
+    rv = inst->QueryInterface(aIID, aResult);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+    }                                                                
+    NS_RELEASE(inst);             /* get rid of extra refcnt */      
+    return rv;              
+}
+
+static NS_IMETHODIMP                 
+CreateNewHTTPChunkConvFactory (nsISupports* aOuter, REFNSIID aIID, void **aResult) 
+{
+    if (!aResult) {                                                  
+        return NS_ERROR_INVALID_POINTER;                             
+    }
+    if (aOuter) {                                                    
+        *aResult = nsnull;                                           
+        return NS_ERROR_NO_AGGREGATION;                              
+    }   
+    nsHTTPChunkConv* inst = nsnull;
+    nsresult rv = NS_NewHTTPChunkConv (&inst);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+        return rv;                                                   
+    } 
+    rv = inst->QueryInterface(aIID, aResult);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+    }                                                                
+    NS_RELEASE(inst);             /* get rid of extra refcnt */      
+    return rv;              
+}
+
+static NS_IMETHODIMP                 
+CreateNewHTTPCompressConvFactory (nsISupports* aOuter, REFNSIID aIID, void **aResult) 
+{
+    if (!aResult) {                                                  
+        return NS_ERROR_INVALID_POINTER;                             
+    }
+    if (aOuter) {                                                    
+        *aResult = nsnull;                                           
+        return NS_ERROR_NO_AGGREGATION;                              
+    }   
+    nsHTTPCompressConv* inst = nsnull;
+    nsresult rv = NS_NewHTTPCompressConv (&inst);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+        return rv;                                                   
+    } 
+    rv = inst->QueryInterface(aIID, aResult);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+    }                                                                
+    NS_RELEASE(inst);             /* get rid of extra refcnt */      
+    return rv;              
+}
+
+static NS_IMETHODIMP
+CreateNewUnknownDecoderFactory(nsISupports *aOuter, REFNSIID aIID, void **aResult)
+{
+  nsresult rv;
+
+  if (!aResult) {
+    return NS_ERROR_NULL_POINTER;
+  }
+  *aResult = nsnull;
+
+  if (aOuter) {
+    return NS_ERROR_NO_AGGREGATION;
+  }
+
+  nsUnknownDecoder *inst;
+  
+  inst = new nsUnknownDecoder();
+  if (!inst) {
+    return NS_ERROR_OUT_OF_MEMORY;
+  }
+  NS_ADDREF(inst);
+  rv = inst->QueryInterface(aIID, aResult);
+  NS_RELEASE(inst);
+
+  return rv;
+}
+
+static NS_IMETHODIMP
+CreateNewNSTXTToHTMLConvFactory(nsISupports *aOuter, REFNSIID aIID, void **aResult)
+{
+  nsresult rv;
+
+  if (!aResult) {
+    return NS_ERROR_NULL_POINTER;
+  }
+  *aResult = nsnull;
+
+  if (aOuter) {
+    return NS_ERROR_NO_AGGREGATION;
+  }
+
+  nsTXTToHTMLConv *inst;
+  
+  inst = new nsTXTToHTMLConv();
+  if (!inst) return NS_ERROR_OUT_OF_MEMORY;
+
+  NS_ADDREF(inst);
+  rv = inst->Init();
+  if (NS_FAILED(rv)) {
+    delete inst;
+    return rv;
+  }
+  rv = inst->QueryInterface(aIID, aResult);
+  NS_RELEASE(inst);
+
+  return rv;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// Module implementation for the net library
+
+// Necko module shutdown hook
+static void PR_CALLBACK nsNeckoShutdown(nsIModule *neckoModule)
+{
+    // Release the url parser that the stdurl is holding.
+    nsStdURL::ShutdownGlobalObjects();
+}
+
+static nsModuleComponentInfo gNetModuleInfo[] = {
+    { "I/O Service", 
+      NS_IOSERVICE_CID,
+      "@mozilla.org/network/io-service;1",
+      nsIOService::Create },
+    { "File Transport Service", 
+      NS_FILETRANSPORTSERVICE_CID,
+      "@mozilla.org/network/file-transport-service;1",
+      nsFileTransportService::Create },
+    { "Socket Transport Service", 
+      NS_SOCKETTRANSPORTSERVICE_CID,
+      "@mozilla.org/network/socket-transport-service;1", 
+      nsSocketTransportService::Create },
+    { "Socket Provider Service", 
+      NS_SOCKETPROVIDERSERVICE_CID,
+      "@mozilla.org/network/socket-provider-service;1",
+      nsSocketProviderService::Create },
+    { "DNS Service", 
+      NS_DNSSERVICE_CID,
+      "@mozilla.org/network/dns-service;1",
+      nsDNSService::Create },
+    { "Standard URL Implementation",
+      NS_STANDARDURL_CID,
+      "@mozilla.org/network/standard-url;1",
+      nsStdURL::Create },
+    { "Simple URI Implementation",
+      NS_SIMPLEURI_CID,
+      "@mozilla.org/network/simple-uri;1",
+      nsSimpleURI::Create },
+    { "External Module Manager", 
+      NS_NETMODULEMGR_CID,
+      "@mozilla.org/network/net-extern-mod;1",
+      nsNetModuleMgr::Create },
+    { NS_FILEIO_CLASSNAME,
+      NS_FILEIO_CID,
+      NS_FILEIO_CONTRACTID,
+      nsFileIO::Create },
+    { NS_INPUTSTREAMIO_CLASSNAME,
+      NS_INPUTSTREAMIO_CID,
+      NS_INPUTSTREAMIO_CONTRACTID,
+      nsInputStreamIO::Create },
+    { NS_STREAMIOCHANNEL_CLASSNAME,
+      NS_STREAMIOCHANNEL_CID,
+      NS_STREAMIOCHANNEL_CONTRACTID,
+      nsStreamIOChannel::Create },
+    { "Unichar Stream Loader", 
+      NS_STREAMLOADER_CID,
+      "@mozilla.org/network/stream-loader;1",
+      nsStreamLoader::Create },
+    { "Stream-As-File Downloader", 
+      NS_DOWNLOADER_CID,
+      "@mozilla.org/network/downloader;1",
+      nsDownloader::Create },
+    { NS_STREAMOBSERVERPROXY_CLASSNAME,
+      NS_STREAMOBSERVERPROXY_CID,
+      NS_STREAMOBSERVERPROXY_CONTRACTID,
+      nsStreamObserverProxyConstructor },
+    { NS_STREAMLISTENERPROXY_CLASSNAME,
+      NS_STREAMLISTENERPROXY_CID,
+      NS_STREAMLISTENERPROXY_CONTRACTID,
+      nsStreamListenerProxyConstructor },
+    { NS_STREAMPROVIDERPROXY_CLASSNAME,
+      NS_STREAMPROVIDERPROXY_CID,
+      NS_STREAMPROVIDERPROXY_CONTRACTID,
+      nsStreamProviderProxyConstructor },
+    { NS_SIMPLESTREAMLISTENER_CLASSNAME,
+      NS_SIMPLESTREAMLISTENER_CID,
+      NS_SIMPLESTREAMLISTENER_CONTRACTID,
+      nsSimpleStreamListenerConstructor },
+    { NS_SIMPLESTREAMPROVIDER_CLASSNAME,
+      NS_SIMPLESTREAMPROVIDER_CID,
+      NS_SIMPLESTREAMPROVIDER_CONTRACTID,
+      nsSimpleStreamProviderConstructor },
+    { "Async Stream Observer",
+      NS_ASYNCSTREAMOBSERVER_CID,
+      "@mozilla.org/network/async-stream-observer;1",
+      nsAsyncStreamObserver::Create },
+    { "Async Stream Listener",
+      NS_ASYNCSTREAMLISTENER_CID,
+      "@mozilla.org/network/async-stream-listener;1",
+      nsAsyncStreamListener::Create },
+    { NS_STORAGETRANSPORT_CLASSNAME,
+      NS_STORAGETRANSPORT_CID,
+      NS_STORAGETRANSPORT_CONTRACTID,
+      nsStorageTransportConstructor },
+      /*
+    { "Sync Stream Listener", 
+      NS_SYNCSTREAMLISTENER_CID,
+      "@mozilla.org/network/sync-stream-listener;1",
+      nsSyncStreamListener::Create },
+      */
+    { "Load Group", 
+      NS_LOADGROUP_CID,
+      "@mozilla.org/network/load-group;1",
+      nsLoadGroup::Create },
+    { NS_LOCALFILEINPUTSTREAM_CLASSNAME, 
+      NS_LOCALFILEINPUTSTREAM_CID,
+      NS_LOCALFILEINPUTSTREAM_CONTRACTID,
+      nsFileInputStream::Create },
+    { NS_LOCALFILEOUTPUTSTREAM_CLASSNAME, 
+      NS_LOCALFILEOUTPUTSTREAM_CID,
+      NS_LOCALFILEOUTPUTSTREAM_CONTRACTID,
+      nsFileOutputStream::Create },
+    { "StdURLParser", 
+      NS_STANDARDURLPARSER_CID,
+      "@mozilla.org/network/standard-urlparser;1",
+      nsStdURLParser::Create },
+    { "AuthURLParser", 
+      NS_AUTHORITYURLPARSER_CID,
+      "@mozilla.org/network/authority-urlparser;1",
+      nsAuthURLParser::Create },
+    { "NoAuthURLParser", 
+      NS_NOAUTHORITYURLPARSER_CID,
+      "@mozilla.org/network/no-authority-urlparser;1",
+      nsNoAuthURLParser::Create },
+    { NS_BUFFEREDINPUTSTREAM_CLASSNAME, 
+      NS_BUFFEREDINPUTSTREAM_CID,
+      NS_BUFFEREDINPUTSTREAM_CONTRACTID,
+      nsBufferedInputStream::Create },
+    { NS_BUFFEREDOUTPUTSTREAM_CLASSNAME, 
+      NS_BUFFEREDOUTPUTSTREAM_CID,
+      NS_BUFFEREDOUTPUTSTREAM_CONTRACTID,
+      nsBufferedOutputStream::Create },
+    { "Protocol Proxy Service",
+      NS_PROTOCOLPROXYSERVICE_CID,
+      "@mozilla.org/network/protocol-proxy-service;1",
+      nsProtocolProxyService::Create },
+
+    // from netwerk/streamconv:
+
+    // this converter is "always" part of a build.
+    // HACK-ALERT, register *all* converters
+    // in this converters component manager 
+    // registration. just piggy backing here until
+    // you can add registration functions to
+    // the generic module macro.
+    { "Stream Converter Service", 
+      NS_STREAMCONVERTERSERVICE_CID,
+      "@mozilla.org/streamConverters;1", 
+      CreateNewStreamConvServiceFactory,
+      RegisterStreamConverters,   // registers *all* converters
+      UnregisterStreamConverters  // unregisters *all* converters
+    },
+
+    // from netwerk/streamconv/converters:
+    { "FTPDirListingConverter", 
+      NS_FTPDIRLISTINGCONVERTER_CID, 
+      NS_ISTREAMCONVERTER_KEY FTP_UNIX_TO_INDEX, 
+      CreateNewFTPDirListingConv
+    },
+
+    { "FTPDirListingConverter", 
+      NS_FTPDIRLISTINGCONVERTER_CID,
+      NS_ISTREAMCONVERTER_KEY FTP_NT_TO_INDEX, 
+      CreateNewFTPDirListingConv
+    },
+    
+    { "MultiMixedConverter", 
+      NS_MULTIMIXEDCONVERTER_CID,
+      NS_ISTREAMCONVERTER_KEY MULTI_MIXED_X, 
+      CreateNewMultiMixedConvFactory
+    },
+
+    { "MultiMixedConverter2",
+      NS_MULTIMIXEDCONVERTER_CID,
+      NS_ISTREAMCONVERTER_KEY MULTI_MIXED,
+      CreateNewMultiMixedConvFactory
+    },
+    { "Unknown Content-Type Decoder",
+      NS_UNKNOWNDECODER_CID,
+      NS_ISTREAMCONVERTER_KEY UNKNOWN_CONTENT,
+      CreateNewUnknownDecoderFactory
+    },
+
+    { "HttpChunkConverter", 
+      NS_HTTPCHUNKCONVERTER_CID,
+      NS_ISTREAMCONVERTER_KEY CHUNKED_TO_UNCHUNKED,
+      CreateNewHTTPChunkConvFactory
+    },
+
+    { "HttpChunkConverter", 
+      NS_HTTPCHUNKCONVERTER_CID,
+      NS_ISTREAMCONVERTER_KEY UNCHUNKED_TO_CHUNKED,
+      CreateNewHTTPChunkConvFactory
+    },
+
+    { "HttpCompressConverter", 
+      NS_HTTPCOMPRESSCONVERTER_CID,
+      NS_ISTREAMCONVERTER_KEY GZIP_TO_UNCOMPRESSED,
+      CreateNewHTTPCompressConvFactory
+    },
+
+    { "HttpCompressConverter", 
+      NS_HTTPCOMPRESSCONVERTER_CID,
+      NS_ISTREAMCONVERTER_KEY XGZIP_TO_UNCOMPRESSED,
+      CreateNewHTTPCompressConvFactory
+    },
+    { "HttpCompressConverter", 
+      NS_HTTPCOMPRESSCONVERTER_CID,
+      NS_ISTREAMCONVERTER_KEY COMPRESS_TO_UNCOMPRESSED,
+      CreateNewHTTPCompressConvFactory
+    },
+    { "HttpCompressConverter", 
+      NS_HTTPCOMPRESSCONVERTER_CID,
+      NS_ISTREAMCONVERTER_KEY XCOMPRESS_TO_UNCOMPRESSED,
+      CreateNewHTTPCompressConvFactory
+    },
+    { "HttpCompressConverter", 
+      NS_HTTPCOMPRESSCONVERTER_CID,
+      NS_ISTREAMCONVERTER_KEY DEFLATE_TO_UNCOMPRESSED,
+      CreateNewHTTPCompressConvFactory
+    },
+    { "NSTXTToHTMLConverter",
+      NS_NSTXTTOHTMLCONVERTER_CID,
+      NS_ISTREAMCONVERTER_KEY PLAIN_TO_HTML,
+      CreateNewNSTXTToHTMLConvFactory
+	},
+	// This is not a real stream converter, it's just
+	// registering it's cid factory here.
+	{ "HACK-TXTToHTMLConverter", 
+  	  MOZITXTTOHTMLCONV_CID,
+	  NS_ISTREAMCONVERTER_KEY, 
+	  CreateNewTXTToHTMLConvFactory
+    },
+
+    // from netwerk/cache:
+    { "Memory Cache", NS_MEM_CACHE_FACTORY_CID, NS_NETWORK_MEMORY_CACHE_CONTRACTID, nsMemCacheConstructor },
+    { "File Cache",   NS_NETDISKCACHE_CID,      NS_NETWORK_FILE_CACHE_CONTRACTID,   nsNetDiskCacheConstructor },
+    { "Cache Manager",NS_CACHE_MANAGER_CID,     NS_NETWORK_CACHE_MANAGER_CONTRACTID,nsCacheManagerConstructor },
+
+    // from netwerk/mime:
+    { "The MIME mapping service", 
+      NS_MIMESERVICE_CID,
+      "@mozilla.org/mimeold;1",
+      nsMIMEService::Create
+    },
+    { "xml mime datasource", 
+      NS_XMLMIMEDATASOURCE_CID,
+      NS_XMLMIMEDATASOURCE_CONTRACTID,
+      nsXMLMIMEDataSource::Create
+    },
+    { "xml mime INFO", 
+      NS_MIMEINFO_CID,
+      NS_MIMEINFO_CONTRACTID,
+      nsMIMEInfoImplConstructor
+    },
+
+    // from netwerk/protocol/file:
+    { "File Protocol Handler", 
+      NS_FILEPROTOCOLHANDLER_CID,  
+      NS_NETWORK_PROTOCOL_CONTRACTID_PREFIX "file", 
+      nsFileProtocolHandler::Create
+    },
+    { NS_LOCALFILECHANNEL_CLASSNAME,
+      NS_LOCALFILECHANNEL_CID,  
+      NS_LOCALFILECHANNEL_CONTRACTID, 
+      nsFileChannel::Create
+    },
+    
+    // from netwerk/protocol/http:
+    { "HTTP Handler",
+      NS_IHTTPHANDLER_CID,
+      NS_NETWORK_PROTOCOL_CONTRACTID_PREFIX "http",
+      nsHTTPHandlerConstructor },
+    { "HTTPS Handler",
+      NS_HTTPS_HANDLER_FACTORY_CID,
+      NS_NETWORK_PROTOCOL_CONTRACTID_PREFIX "https",
+      nsHTTPSHandler::Create },
+    { "Basic Auth Encoder",
+      NS_BASICAUTH_CID,
+      NS_BASICAUTH_CONTRACTID,
+      nsBasicAuthConstructor,
+      RegisterBasicAuth,
+      UnregisterBasicAuth
+    },
+
+    // from netwerk/protocol/data:
+    { "Data Protocol Handler", 
+      NS_DATAHANDLER_CID,
+      NS_NETWORK_PROTOCOL_CONTRACTID_PREFIX "data", 
+      nsDataHandler::Create},
+
+    // from netwerk/protocol/jar:
+    { "JAR Protocol Handler", 
+       NS_JARPROTOCOLHANDLER_CID,
+       NS_NETWORK_PROTOCOL_CONTRACTID_PREFIX "jar", 
+       nsJARProtocolHandler::Create
+    },
+
+    // from netwerk/protocol/res:
+    { "The Resource Protocol Handler", 
+      NS_RESPROTOCOLHANDLER_CID,
+      NS_NETWORK_PROTOCOL_CONTRACTID_PREFIX "resource",
+      nsResProtocolHandler::Create
+    },
+
+    // from netwerk/protocol/about:
+    { "About Protocol Handler", 
+      NS_ABOUTPROTOCOLHANDLER_CID,
+      NS_NETWORK_PROTOCOL_CONTRACTID_PREFIX "about", 
+      nsAboutProtocolHandler::Create
+    },
+    { "about:blank", 
+      NS_ABOUT_BLANK_MODULE_CID,
+      NS_ABOUT_MODULE_CONTRACTID_PREFIX "blank", 
+      nsAboutBlank::Create
+    },
+    { "about:bloat", 
+      NS_ABOUT_BLOAT_MODULE_CID,
+      NS_ABOUT_MODULE_CONTRACTID_PREFIX "bloat", 
+      nsAboutBloat::Create
+    },
+    { "about:credits",
+      NS_ABOUT_CREDITS_MODULE_CID,
+      NS_ABOUT_MODULE_CONTRACTID_PREFIX "credits",
+      nsAboutCredits::Create
+    },
+    { "about:plugins",
+      NS_ABOUT_PLUGINS_MODULE_CID,
+      NS_ABOUT_MODULE_CONTRACTID_PREFIX "plugins",
+      nsAboutPlugins::Create
+    },
+    { "about:mozilla",
+      MZ_ABOUT_MOZILLA_MODULE_CID,
+      NS_ABOUT_MODULE_CONTRACTID_PREFIX "mozilla",
+      mzAboutMozilla::Create
+    },
+    { "about:cache", 
+      NS_ABOUT_CACHE_MODULE_CID,
+      NS_ABOUT_MODULE_CONTRACTID_PREFIX "cache", 
+      nsAboutCache::Create
+    },
+    // from netwerk/protocol/keyword:
+    { "The Keyword Protocol Handler", 
+      NS_KEYWORDPROTOCOLHANDLER_CID,
+      NS_NETWORK_PROTOCOL_CONTRACTID_PREFIX "keyword",
+      nsKeywordProtocolHandler::Create
+    },
+
+    {  NS_ISOCKSSOCKETPROVIDER_CLASSNAME,
+       NS_SOCKSSOCKETPROVIDER_CID,
+       NS_ISOCKSSOCKETPROVIDER_CONTRACTID,
+       nsSOCKSSocketProvider::Create
+    }
+
+};
+
+NS_IMPL_NSGETMODULE_WITH_DTOR("necko core and primary protocols", gNetModuleInfo,
+                              nsNeckoShutdown)

mozilla/netwerk/streamconv/Makefile.in

@@ -0,0 +1,36 @@
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#
+
+DEPTH		= ../..
+topsrcdir	= @top_srcdir@
+srcdir		= @srcdir@
+VPATH		= @srcdir@
+
+include $(DEPTH)/config/autoconf.mk
+
+DIRS		= public src converters
+
+ifdef ENABLE_TESTS
+DIRS		+= test
+endif
+
+include $(topsrcdir)/config/rules.mk
+

mozilla/netwerk/streamconv/converters/Makefile.in

@@ -0,0 +1,53 @@
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#
+
+DEPTH		= ../../..
+topsrcdir	= @top_srcdir@
+srcdir		= @srcdir@
+VPATH		= @srcdir@
+
+include $(DEPTH)/config/autoconf.mk
+
+MODULE		= necko
+LIBRARY_NAME	= nkcnvts_s
+REQUIRES	= xpcom string mime locale util pref js
+
+EXPORTS =                 \
+        nsHTTPChunkConv.h \
+        $(NULL)
+
+CPPSRCS		= \
+		nsMultiMixedConv.cpp \
+		nsFTPDirListingConv.cpp \
+		mozTXTToHTMLConv.cpp \
+		nsUnknownDecoder.cpp \
+		nsHTTPChunkConv.cpp \
+		nsHTTPCompressConv.cpp \
+		nsTXTToHTMLConv.cpp \
+		$(NULL)
+
+# we don't want the shared lib, but we want to force the creation of a
+# static lib.
+override NO_SHARED_LIB=1
+override NO_STATIC_LIB=
+
+include $(topsrcdir)/config/rules.mk
+

mozilla/netwerk/streamconv/converters/makefile.win

@@ -0,0 +1,50 @@
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+DEPTH = ..\..\..
+include <$(DEPTH)/config/config.mak>
+
+MODULE = necko
+
+LIBRARY_NAME=nkcnvts_s
+
+LCFLAGS = -DWIN32_LEAN_AND_MEAN -D_IMPL_NS_NET
+# Add this for performance TXT-HTML performance #'s: -DMOZ_PERF_METRICS
+
+EXPORTS =                 \
+        nsHTTPChunkConv.h \
+        $(NULL)
+
+CPP_OBJS =                                  \
+        .\$(OBJDIR)\nsMultiMixedConv.obj    \
+        .\$(OBJDIR)\nsFTPDirListingConv.obj \
+        .\$(OBJDIR)\mozTXTToHTMLConv.obj    \
+        .\$(OBJDIR)\nsHTTPChunkConv.obj     \
+        .\$(OBJDIR)\nsHTTPCompressConv.obj  \
+        .\$(OBJDIR)\nsUnknownDecoder.obj    \
+        .\$(OBJDIR)\nsTXTToHTMLConv.obj     \
+        $(NULL)
+
+include <$(DEPTH)\config\rules.mak>
+
+install:: $(LIBRARY)
+	$(MAKE_INSTALL) $(LIBRARY) $(DIST)\lib
+
+clobber::
+        $(RM) $(DIST)\lib\$(LIBRARY_NAME).lib

mozilla/netwerk/streamconv/converters/mozTXTToHTMLConv.h

@@ -0,0 +1,325 @@
+/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ * 
+ * The "License" shall be the Mozilla Public License Version 1.1, except
+ * Sections 6.2 and 11, but with the addition of the below defined Section 14.
+ * You may obtain a copy of the Mozilla Public License Version 1.1 at
+ * <http://www.mozilla.org/MPL/>. The contents of this file are subject to the
+ * License; you may not use this file except in compliance with the License.
+ * 
+ * Section 14: MISCELLANEOUS.
+ * This License represents the complete agreement concerning subject matter
+ * hereof. If any provision of this License is held to be unenforceable, such
+ * provision shall be reformed only to the extent necessary to make it
+ * enforceable. This License shall be governed by German law provisions. Any
+ * litigation relating to this License shall be subject to German jurisdiction.
+ * 
+ * Once Covered Code has been published under a particular version of the
+ * License, You may always continue to use it under the terms of that version.
+ + The Initial Developer and no one else has the right to modify the terms
+ * applicable to Covered Code created under this License.
+ * (End of Section 14)
+ * 
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
+ * License for the specific language governing rights and limitations
+ * under the License.
+ * 
+ * The Original Code is the Mozilla Text to HTML converter code.
+ * 
+ * The Initial Developer of the Original Code is Ben Bucksch
+ * <http://www.bucksch.org>. Portions created by Ben Bucksch are Copyright
+ * (C) 1999, 2000 Ben Bucksch. All Rights Reserved.
+ * 
+ * Contributor(s):
+ */
+
+/**
+  Description: Currently only functions to enhance plain text with HTML tags. See mozITXTToHTMLConv. Stream conversion is defunct.
+*/
+
+#ifndef _mozTXTToHTMLConv_h__
+#define _mozTXTToHTMLConv_h__
+
+#include "mozITXTToHTMLConv.h"
+#include "nsIIOService.h"
+#include "nsString.h"
+#include "nsTimer.h"
+#include "nsCOMPtr.h"
+
+static NS_DEFINE_CID(kTXTToHTMLConvCID, MOZITXTTOHTMLCONV_CID);
+
+class mozTXTToHTMLConv : public mozITXTToHTMLConv
+{
+
+
+//////////////////////////////////////////////////////////
+public:
+//////////////////////////////////////////////////////////
+
+  mozTXTToHTMLConv();
+  virtual ~mozTXTToHTMLConv();
+  NS_DECL_ISUPPORTS
+  static const nsIID& GetIID(void)
+       { static nsIID iid = MOZITXTTOHTMLCONV_IID; return iid; }
+
+  NS_DECL_MOZITXTTOHTMLCONV
+  NS_DECL_NSISTREAMOBSERVER
+  NS_DECL_NSISTREAMLISTENER
+  NS_DECL_NSISTREAMCONVERTER
+
+/**
+  see mozITXTToHTMLConv::ScanTXT
+ */
+  void ScanTXT(const PRUnichar * aInString, PRInt32 aInStringLength, PRUint32 whattodo, nsString& aOutString);
+
+/**
+  see mozITXTToHTMLConv::ScanHTML. We will modify aInString potentially...
+ */
+  void ScanHTML(nsString& aInString, PRUint32 whattodo, nsString &aOutString);
+
+/**
+  see mozITXTToHTMLConv::CiteLevelTXT
+ */
+  PRInt32 CiteLevelTXT(const PRUnichar * line,PRUint32& logLineStart);
+
+
+  // Timing!
+  MOZ_TIMER_DECLARE(mScanTXTTimer)
+  MOZ_TIMER_DECLARE(mGlyphHitTimer)
+  MOZ_TIMER_DECLARE(mTotalMimeTime)
+
+
+//////////////////////////////////////////////////////////
+protected:
+//////////////////////////////////////////////////////////
+  nsCOMPtr<nsIIOService> mIOService; // for performance reasons, cache the netwerk service...
+/**
+  Completes<ul>
+  <li>Case 1: mailto: "mozilla@bucksch.org" -> "mailto:mozilla@bucksch.org"
+  <li>Case 2: http:   "www.mozilla.org"     -> "http://www.mozilla.org"
+  <li>Case 3: ftp:    "ftp.mozilla.org"     -> "ftp://www.mozilla.org"
+  </ul>
+  It does no check, if the resulting URL is valid.
+  @param text (in): abbreviated URL
+  @param pos (in): position of "@" (case 1) or first "." (case 2 and 3)
+  @return Completed URL at success and empty string at failure
+ */
+  void CompleteAbbreviatedURL(const PRUnichar * aInString, PRInt32 aInLength, 
+                              const PRUint32 pos, nsString& aOutString);
+
+
+//////////////////////////////////////////////////////////
+private:
+//////////////////////////////////////////////////////////
+
+  enum LIMTYPE
+  {
+    LT_IGNORE,     // limitation not checked
+    LT_DELIMITER,  // not alphanumeric and not rep[0]. End of text is also ok.
+    LT_ALPHA,      // alpha char
+    LT_DIGIT
+  };
+
+/**
+  @param text (in): the string to search through.<p>
+         If before = IGNORE,<br>
+           rep is compared starting at 1. char of text (text[0]),<br>
+           else starting at 2. char of text (text[1]).
+         Chars after "after"-delimiter are ignored.
+  @param rep (in): the string to look for
+  @param aRepLen (in): the number of bytes in the string to look for
+  @param before (in): limitation before rep
+  @param after (in): limitation after rep
+  @return true, if rep is found and limitation spec is met or rep is empty
+*/
+  PRBool ItMatchesDelimited(const PRUnichar * aInString, PRInt32 aInLength,
+    const char* rep, PRInt32 aRepLen, LIMTYPE before, LIMTYPE after);
+
+/**
+  @param see ItMatchesDelimited
+  @return Number of ItMatchesDelimited in text
+*/
+  PRUint32 NumberOfMatches(const PRUnichar * aInString, PRInt32 aInStringLength,
+     const char* rep, PRInt32 aRepLen, LIMTYPE before, LIMTYPE after);
+
+/**
+  Currently only changes "<", ">" and "&". All others stay as they are.<p>
+  "Char" in function name to avoid side effects with nsString(ch)
+  constructors.
+  @param ch (in) 
+  @param aStringToAppendto (out) - the string to append the escaped
+                                   string to.
+*/
+  void EscapeChar(const PRUnichar ch, nsString& aStringToAppendto);
+
+/**
+  See EscapeChar. Escapes the string in place.
+*/
+  void EscapeStr(nsString& aInString);
+
+/**
+  Currently only reverts "<", ">" and "&". All others stay as they are.<p>
+  @param aInString (in) HTML string
+  @param aStartPos (in) start index into the buffer
+  @param aLength (in) length of the buffer
+  @param aOutString (out) unescaped buffer
+*/
+  void UnescapeStr(const PRUnichar * aInString, PRInt32 aStartPos, PRInt32 aLength, nsString& aOutString);
+
+/**
+  <em>Note</em>: I use different strategies to pass context between the
+  functions (full text and pos vs. cutted text and col0, glphyTextLen vs.
+  replaceBefore/-After). It makes some sense, but is hard to understand
+  (maintain) :-(.
+*/
+
+/**
+  <p><em>Note:</em> replaceBefore + replaceAfter + 1 (for char at pos) chars
+  in text should be replaced by outputHTML.</p>
+  <p><em>Note:</em> This function should be able to process a URL on multiple
+  lines, but currently, ScanForURLs is called for every line, so it can't.</p>
+  @param text (in): includes possibly a URL
+  @param pos (in): position in text, where either ":", "." or "@" are found
+  @param whathasbeendone (in): What the calling ScanTXT did/has to do with the
+              (not-linkified) text, i.e. usually the "whattodo" parameter.
+              (Needed to calculate replaceBefore.) NOT what will be done with
+              the content of the link.
+  @param outputHTML (out): URL with HTML-a tag
+  @param replaceBefore (out): Number of chars of URL before pos
+  @param replaceAfter (out): Number of chars of URL after pos
+  @return URL found
+*/
+  PRBool FindURL(const PRUnichar * aInString, PRInt32 aInLength, const PRUint32 pos,
+          const PRUint32 whathasbeendone,
+          nsString& outputHTML, PRInt32& replaceBefore, PRInt32& replaceAfter);
+
+  enum modetype {
+         unknown,
+         RFC1738,          /* Check, if RFC1738, APPENDIX compliant,
+                              like "<URL:http://www.mozilla.org>". */
+         RFC2396E,         /* RFC2396, APPENDIX E allows anglebrackets (like
+                              "<http://www.mozilla.org>") (without "URL:") or
+                              quotation marks(like ""http://www.mozilla.org"").
+                              Also allow email addresses without scheme,
+                              e.g. "<mozilla@bucksch.org>" */
+         freetext,         /* assume heading scheme
+                              with "[a-zA-Z][a-zA-Z0-9+\-\.]*:" like "news:"
+                              (see RFC2396, Section 3.1).
+                              Certain characters (see code) or any whitespace
+                              (including linebreaks) end the URL.
+                              Other certain (punctation) characters (see code)
+                              at the end are stripped off. */
+         abbreviated       /* Similar to freetext, but without scheme, e.g.
+	                      "www.mozilla.org", "ftp.mozilla.org" and
+                              "mozilla@bucksch.org". */
+      /* RFC1738 and RFC2396E type URLs may use multiple lines,
+         whitespace is stripped. Special characters like ")" stay intact.*/
+  };
+
+/**
+ * @param text (in), pos (in): see FindURL
+ * @param check (in): Start must be conform with this mode
+ * @param start (out): Position in text, where URL (including brackets or
+ *             similar) starts
+ * @return |check|-conform start has been found
+ */
+  PRBool FindURLStart(const PRUnichar * aInString, PRInt32 aInLength, const PRUint32 pos,
+            	               const modetype check, PRUint32& start);
+
+/**
+ * @param text (in), pos (in): see FindURL
+ * @param check (in): End must be conform with this mode
+ * @param start (in): see FindURLStart
+ * @param end (out): Similar to |start| param of FindURLStart
+ * @return |check|-conform end has been found
+ */
+  PRBool FindURLEnd(const PRUnichar * aInString, PRInt32 aInStringLength, const PRUint32 pos,
+           const modetype check, const PRUint32 start, PRUint32& end);
+
+/**
+ * @param text (in), pos (in), whathasbeendone (in): see FindURL
+ * @param check (in): Current mode
+ * @param start (in), end (in): see FindURLEnd
+ * @param txtURL (out): Guessed (raw) URL.
+ *             Without whitespace, but not completed.
+ * @param desc (out): Link as shown to the user, but already escaped.
+ *             Should be placed between the <a> and </a> tags.
+ * @param replaceBefore(out), replaceAfter (out): see FindURL
+ */
+  void CalculateURLBoundaries(const PRUnichar * aInString, PRInt32 aInStringLength, 
+     const PRUint32 pos, const PRUint32 whathasbeendone,
+     const modetype check, const PRUint32 start, const PRUint32 end,
+     nsString& txtURL, nsString& desc,
+     PRInt32& replaceBefore, PRInt32& replaceAfter);
+
+/**
+ * @param txtURL (in), desc (in): see CalculateURLBoundaries
+ * @param outputHTML (out): see FindURL
+ * @return A valid URL could be found (and creation of HTML successful)
+ */
+  PRBool CheckURLAndCreateHTML(
+       const nsString& txtURL, const nsString& desc, const modetype mode,
+       nsString& outputHTML);
+
+/**
+  @param text (in): line of text possibly with tagTXT.<p>
+              if col0 is true,
+                starting with tagTXT<br>
+              else
+                starting one char before tagTXT
+  @param col0 (in): tagTXT is on the beginning of the line (or paragraph).
+              open must be 0 then.
+  @param tagTXT (in): Tag in plaintext to search for, e.g. "*"
+  @param aTagTxtLen (in): length of tagTXT.
+  @param tagHTML (in): HTML-Tag to replace tagTXT with,
+              without "<" and ">", e.g. "strong"
+  @param attributeHTML (in): HTML-attribute to add to opening tagHTML,
+              e.g. "class=txt_star"
+  @param aOutString: string to APPEND the converted html into
+  @param open (in/out): Number of currently open tags of type tagHTML
+  @return Conversion succeeded
+*/
+  PRBool StructPhraseHit(const PRUnichar * aInString, PRInt32 aInStringLength, PRBool col0,
+     const char* tagTXT,
+     PRInt32 aTagTxtLen, 
+     const char* tagHTML, const char* attributeHTML,
+     nsString& aOutputString, PRUint32& openTags);
+
+/**
+  @param text (in), col0 (in): see GlyphHit
+  @param tagTXT (in): Smily, see also StructPhraseHit
+  @param aTagTxtLen (in): length of tagTXT
+  @param tagHTML (in): see StructPhraseHit
+  @param outputHTML (out): new string containing the html for the smily
+  @param glyphTextLen (out): see GlyphHit
+*/
+  PRBool SmilyHit(const PRUnichar * aInString, PRInt32 aLength, PRBool col0,
+         const char* tagTXT, PRInt32 aTagTxtLen, const char* tagHTML,
+         nsString& outputHTML, PRInt32& glyphTextLen);
+
+/**
+  Checks, if we can replace some chars at the start of line with prettier HTML
+  code.<p>
+  If success is reported, replace the first glyphTextLen chars with outputHTML
+
+  @param text (in): line of text possibly with Glyph.<p>
+              If col0 is true,
+                starting with Glyph <br><!-- (br not part of text) -->
+              else
+                starting one char before Glyph
+  @param col0 (in): text starts at the beginning of the line (or paragraph)
+  @param aOutString (out): APPENDS html for the glyph to this string
+  @param glyphTextLen (out): Length of original text to replace
+  @return see StructPhraseHit
+*/
+  PRBool GlyphHit(const PRUnichar * aInString, PRInt32 aInLength, PRBool col0,
+       nsString& aOutString, PRInt32& glyphTextLen);
+
+};
+
+// It's said, that Win32 and Mac don't like static const members
+const PRInt32 mozTXTToHTMLConv_lastMode = 4;
+	                        // Needed (only) by mozTXTToHTMLConv::FindURL
+const PRInt32 mozTXTToHTMLConv_numberOfModes = 4;  // dito; unknown not counted
+
+#endif

mozilla/netwerk/streamconv/converters/nsConvFactories.cpp

@@ -0,0 +1,237 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+
+#include "nsCOMPtr.h"
+#include "nsIModule.h"
+#include "nsIGenericFactory.h"
+#include "nsICategoryManager.h"
+
+#include "nsFTPDirListingConv.h"
+#include "nsMultiMixedConv.h"
+#include "nsHTTPChunkConv.h"
+#include "nsHTTPCompressConv.h"
+#include "mozTXTToHTMLConv.h"
+#include "nsUnknownDecoder.h"
+#include "nsTXTToHTMLConv.h"
+
+nsresult NS_NewFTPDirListingConv(nsFTPDirListingConv** result);
+nsresult NS_NewMultiMixedConv (nsMultiMixedConv** result);
+nsresult MOZ_NewTXTToHTMLConv (mozTXTToHTMLConv** result);
+nsresult NS_NewHTTPChunkConv  (nsHTTPChunkConv ** result);
+nsresult NS_NewHTTPCompressConv  (nsHTTPCompressConv ** result);
+nsresult NS_NewNSTXTToHTMLConv(nsTXTToHTMLConv** result);
+
+
+
+static NS_IMETHODIMP                 
+CreateNewFTPDirListingConv(nsISupports* aOuter, REFNSIID aIID, void **aResult) 
+{
+    if (!aResult) {                                                  
+        return NS_ERROR_INVALID_POINTER;                             
+    }
+    if (aOuter) {                                                    
+        *aResult = nsnull;                                           
+        return NS_ERROR_NO_AGGREGATION;                              
+    }   
+    nsFTPDirListingConv* inst = nsnull;
+    nsresult rv = NS_NewFTPDirListingConv(&inst);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+        return rv;                                                   
+    } 
+    rv = inst->QueryInterface(aIID, aResult);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+    }                                                                
+    NS_RELEASE(inst);             /* get rid of extra refcnt */      
+    return rv;              
+}
+
+static NS_IMETHODIMP                 
+CreateNewMultiMixedConvFactory(nsISupports* aOuter, REFNSIID aIID, void **aResult) 
+{
+    if (!aResult) {                                                  
+        return NS_ERROR_INVALID_POINTER;                             
+    }
+    if (aOuter) {                                                    
+        *aResult = nsnull;                                           
+        return NS_ERROR_NO_AGGREGATION;                              
+    }   
+    nsMultiMixedConv* inst = nsnull;
+    nsresult rv = NS_NewMultiMixedConv(&inst);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+        return rv;                                                   
+    } 
+    rv = inst->QueryInterface(aIID, aResult);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+    }                                                                
+    NS_RELEASE(inst);             /* get rid of extra refcnt */      
+    return rv;              
+}
+
+static NS_IMETHODIMP                 
+CreateNewTXTToHTMLConvFactory(nsISupports* aOuter, REFNSIID aIID, void **aResult) 
+{
+    if (!aResult) {                                                  
+        return NS_ERROR_INVALID_POINTER;                             
+    }
+    if (aOuter) {                                                    
+        *aResult = nsnull;                                           
+        return NS_ERROR_NO_AGGREGATION;                              
+    }   
+    mozTXTToHTMLConv* inst = nsnull;
+    nsresult rv = MOZ_NewTXTToHTMLConv(&inst);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+        return rv;                                                   
+    } 
+    rv = inst->QueryInterface(aIID, aResult);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+    }                                                                
+    NS_RELEASE(inst);             /* get rid of extra refcnt */      
+    return rv;              
+}
+
+static NS_IMETHODIMP                 
+CreateNewHTTPChunkConvFactory (nsISupports* aOuter, REFNSIID aIID, void **aResult) 
+{
+    if (!aResult) {                                                  
+        return NS_ERROR_INVALID_POINTER;                             
+    }
+    if (aOuter) {                                                    
+        *aResult = nsnull;                                           
+        return NS_ERROR_NO_AGGREGATION;                              
+    }   
+    nsHTTPChunkConv* inst = nsnull;
+    nsresult rv = NS_NewHTTPChunkConv (&inst);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+        return rv;                                                   
+    } 
+    rv = inst->QueryInterface(aIID, aResult);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+    }                                                                
+    NS_RELEASE(inst);             /* get rid of extra refcnt */      
+    return rv;              
+}
+
+static NS_IMETHODIMP                 
+CreateNewHTTPCompressConvFactory (nsISupports* aOuter, REFNSIID aIID, void **aResult) 
+{
+    if (!aResult) {                                                  
+        return NS_ERROR_INVALID_POINTER;                             
+    }
+    if (aOuter) {                                                    
+        *aResult = nsnull;                                           
+        return NS_ERROR_NO_AGGREGATION;                              
+    }   
+    nsHTTPCompressConv* inst = nsnull;
+    nsresult rv = NS_NewHTTPCompressConv (&inst);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+        return rv;                                                   
+    } 
+    rv = inst->QueryInterface(aIID, aResult);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+    }                                                                
+    NS_RELEASE(inst);             /* get rid of extra refcnt */      
+    return rv;              
+}
+
+static NS_IMETHODIMP
+CreateNewUnknownDecoderFactory(nsISupports *aOuter, REFNSIID aIID, void **aResult)
+{
+  nsresult rv;
+
+  if (!aResult) {
+    return NS_ERROR_NULL_POINTER;
+  }
+  *aResult = nsnull;
+
+  if (aOuter) {
+    return NS_ERROR_NO_AGGREGATION;
+  }
+
+  nsUnknownDecoder *inst;
+  
+  inst = new nsUnknownDecoder();
+  if (!inst) {
+    return NS_ERROR_OUT_OF_MEMORY;
+  }
+  NS_ADDREF(inst);
+  rv = inst->QueryInterface(aIID, aResult);
+  NS_RELEASE(inst);
+
+  return rv;
+}
+
+static NS_IMETHODIMP
+CreateNewNSTXTToHTMLConvFactory(nsISupports *aOuter, REFNSIID aIID, void **aResult)
+{
+  nsresult rv;
+
+  if (!aResult) {
+    return NS_ERROR_NULL_POINTER;
+  }
+  *aResult = nsnull;
+
+  if (aOuter) {
+    return NS_ERROR_NO_AGGREGATION;
+  }
+
+  nsTXTToHTMLConv *inst;
+  
+  inst = new nsTXTToHTMLConv();
+  if (!inst) return NS_ERROR_OUT_OF_MEMORY;
+
+  NS_ADDREF(inst);
+  rv = inst->Init();
+  if (NS_FAILED(rv)) {
+    delete inst;
+    return rv;
+  }
+  rv = inst->QueryInterface(aIID, aResult);
+  NS_RELEASE(inst);
+
+  return rv;
+}
+
+
+// The list of components we register
+static nsModuleComponentInfo components[] =
+{
+
+	// This is not a real stream converter, it's just
+	// registering it's cid factory here.
+	{ "HACK-TXTToHTMLConverter", 
+  	  MOZITXTTOHTMLCONV_CID,
+	  NS_ISTREAMCONVERTER_KEY, 
+	  CreateNewTXTToHTMLConvFactory
+    }
+};
+
+NS_IMPL_NSGETMODULE("nsConvModule", components);

mozilla/netwerk/streamconv/converters/nsFTPDirListingConv.h

@@ -0,0 +1,166 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+#ifndef __nsftpdirlistingdconv__h__
+#define __nsftpdirlistingdconv__h__
+
+#include "nsIStreamConverter.h"
+#include "nsIChannel.h"
+#include "nsIURI.h"
+#include "nsString.h"
+#include "nsILocale.h"
+#include "nsIDateTimeFormat.h"
+
+#include "nsIFactory.h"
+
+#define NS_FTPDIRLISTINGCONVERTER_CID                         \
+{ /* 14C0E880-623E-11d3-A178-0050041CAF44 */         \
+    0x14c0e880,                                      \
+    0x623e,                                          \
+    0x11d3,                                          \
+    {0xa1, 0x78, 0x00, 0x50, 0x04, 0x1c, 0xaf, 0x44}       \
+}
+static NS_DEFINE_CID(kFTPDirListingConverterCID, NS_FTPDIRLISTINGCONVERTER_CID);
+
+// The nsFTPDirListingConv stream converter converts a stream of type "text/ftp-dir-SERVER_TYPE"
+// (where SERVER_TYPE is one of the following):
+//
+// SERVER TYPES:
+// generic
+// unix
+// dcts
+// ncsa
+// peter_lewis
+// machten
+// cms
+// tcpc
+// vms
+// nt
+// eplf
+//
+// nsFTPDirListingConv converts the raw ascii text directory generated via a FTP
+// LIST or NLST command, to the application/http-index-format MIME-type.
+// For more info see: http://www.area.com/~roeber/file_format.html
+
+typedef enum _FTP_Server_Type {
+    GENERIC,
+    UNIX,
+    DCTS,
+    NCSA,
+    PETER_LEWIS,
+    MACHTEN,
+    CMS,
+    TCPC,
+    VMS,
+    NT,
+    EPLF
+} FTP_Server_Type;
+
+typedef enum _FTPentryType {
+    Dir,
+    File,
+    Link
+} FTPentryType;
+
+
+// indexEntry is the data structure used to maintain directory entry information.
+class indexEntry {
+public:
+    indexEntry() { mContentLen = 0; mType = File; mSupressSize = PR_FALSE; };
+
+    nsCString       mName;              // the file or dir name
+    FTPentryType    mType;              
+    PRInt32         mContentLen;        // length of the file
+    nsCString       mContentType;       // type of the file
+    PRExplodedTime  mMDTM;              // modified time
+    PRBool          mSupressSize;       // supress the size info from display
+};
+
+class nsFTPDirListingConv : public nsIStreamConverter {
+public:
+    // nsISupports methods
+    NS_DECL_ISUPPORTS
+
+    // nsIStreamConverter methods
+    NS_DECL_NSISTREAMCONVERTER
+
+    // nsIStreamListener methods
+    NS_DECL_NSISTREAMLISTENER
+
+    // nsIStreamObserver methods
+    NS_DECL_NSISTREAMOBSERVER
+
+    // nsFTPDirListingConv methods
+    nsFTPDirListingConv();
+    virtual ~nsFTPDirListingConv();
+    nsresult Init();
+
+    // For factory creation.
+    static NS_METHOD
+    Create(nsISupports *aOuter, REFNSIID aIID, void **aResult) {
+        nsresult rv;
+        if (aOuter)
+            return NS_ERROR_NO_AGGREGATION;
+
+        nsFTPDirListingConv* _s = new nsFTPDirListingConv();
+        if (_s == nsnull)
+            return NS_ERROR_OUT_OF_MEMORY;
+        NS_ADDREF(_s);
+        rv = _s->Init();
+        if (NS_FAILED(rv)) {
+            delete _s;
+            return rv;
+        }
+        rv = _s->QueryInterface(aIID, aResult);
+        NS_RELEASE(_s);
+        return rv;
+    }
+
+private:
+    // util parsing methods
+    PRInt8   MonthNumber(const char *aCStr);
+    PRBool   IsLSDate(char *aCStr);
+
+    // date conversion/parsing methods
+    PRBool   ConvertUNIXDate(char *aCStr, PRExplodedTime& outDate);
+    PRBool   ConvertDOSDate(char *aCStr, PRExplodedTime& outDate);
+
+    // line parsing methods
+    nsresult ParseLSLine(char *aLine, indexEntry *aEntry);
+    nsresult ParseVMSLine(char *aLine, indexEntry *aEntry);
+
+    void     InitPRExplodedTime(PRExplodedTime& aTime);
+    char*    DigestBufferLines(char *aBuffer, nsCAutoString &aString);
+
+    // member data
+    FTP_Server_Type     mServerType;        // what kind of server is the data coming from?
+    nsCAutoString       mBuffer;            // buffered data.
+    PRBool              mSentHeading;       // have we sent 100, 101, 200, and 300 lines yet?
+
+
+    nsIStreamListener   *mFinalListener; // this guy gets the converted data via his OnDataAvailable()
+    nsIChannel          *mPartChannel;  // the channel for the given part we're processing.
+                                        // one channel per part.
+    nsILocale           *mLocale;            // the application locale for date formating
+    nsIDateTimeFormat   *mDateTimeFormat;    // for the actual date time formatting.
+};
+
+#endif /* __nsftpdirlistingdconv__h__ */

mozilla/netwerk/streamconv/converters/nsHTTPChunkConv.cpp

@@ -0,0 +1,442 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): ruslan
+ */
+
+#include "nsHTTPChunkConv.h"
+#include "nsMemory.h"
+#include "plstr.h"
+#include "prlog.h"
+#include "nsIChannel.h"
+#include "nsCOMPtr.h"
+#include "nsIByteArrayInputStream.h"
+#include "nsIStringStream.h"
+
+#include <ctype.h>
+
+// nsISupports implementation
+NS_IMPL_THREADSAFE_ISUPPORTS2 (nsHTTPChunkConv, nsIStreamConverter, nsIStreamListener);
+
+// nsFTPDirListingConv methods
+nsHTTPChunkConv::nsHTTPChunkConv()
+{
+    NS_INIT_ISUPPORTS ();
+    mListener    = nsnull;
+    mChunkBuffer = NULL;
+    mState = CHUNK_STATE_INIT;
+
+    mValueBufLen = 0;
+    mHeaderBufLen= 0;
+    mHeadersCount= mHeadersExpected = 0;
+
+    mChunkContext= NULL;
+}
+
+nsHTTPChunkConv::~nsHTTPChunkConv ()
+{
+    NS_IF_RELEASE(mListener);
+
+    if (mChunkBuffer != NULL)
+        nsMemory::Free (mChunkBuffer);
+}
+
+NS_IMETHODIMP
+nsHTTPChunkConv::AsyncConvertData (
+                            const PRUnichar *aFromType, 
+                            const PRUnichar *aToType, 
+                            nsIStreamListener *aListener, 
+                            nsISupports *aCtxt)
+{
+    nsString from (aFromType);
+    nsString to   ( aToType );
+
+    char * fromStr = from.ToNewCString ();
+    char *   toStr =   to.ToNewCString ();
+
+    if (!PL_strncasecmp (fromStr, HTTP_CHUNK_TYPE, strlen (HTTP_CHUNK_TYPE  ) )
+        &&
+        !PL_strncasecmp (toStr, HTTP_UNCHUNK_TYPE, strlen (HTTP_UNCHUNK_TYPE)))
+        mMode = DO_UNCHUNKING;
+    else
+        mMode = DO_CHUNKING;
+
+    nsMemory::Free (fromStr);
+    nsMemory::Free (  toStr);
+
+    // hook ourself up with the receiving listener. 
+    mListener = aListener;
+    NS_ADDREF (mListener);
+
+    mAsyncConvContext = (nsISupportsVoid *) aCtxt;
+    if (mAsyncConvContext)
+    {
+        const void *p;
+        mAsyncConvContext -> GetData (&p);
+        mChunkContext = (nsHTTPChunkConvContext *)p;
+    }
+
+    return NS_OK; 
+} 
+
+NS_IMETHODIMP
+nsHTTPChunkConv::OnStartRequest (nsIRequest* request, nsISupports *aContext)
+{
+    return mListener->OnStartRequest (request, aContext);
+} 
+
+NS_IMETHODIMP
+nsHTTPChunkConv::OnStopRequest(nsIRequest* request, nsISupports *aContext, 
+                               nsresult aStatus, const PRUnichar* aStatusArg)
+{
+    return mListener->OnStopRequest(request, aContext, aStatus, aStatusArg);
+} 
+
+NS_IMETHODIMP
+nsHTTPChunkConv::OnDataAvailable ( 
+                              nsIRequest* request, 
+                              nsISupports *aContext, 
+                              nsIInputStream *iStr, 
+                              PRUint32 aSourceOffset, 
+                              PRUint32 aCount)
+{
+    nsresult rv = NS_ERROR_FAILURE;
+    PRUint32 rl;
+    PRUint32 streamLen;
+    char c = 0;
+
+    rv = iStr -> Available (&streamLen);
+    if (NS_FAILED (rv))
+        return rv;
+
+    if (streamLen == 0)
+        return NS_OK;
+
+    if (mMode == DO_CHUNKING)
+    {
+        mChunkBuffer = (char * )nsMemory::Alloc (streamLen + 20);
+        mChunkBufferPos = sprintf (mChunkBuffer, "%x%c%c", streamLen, '\r', '\n');
+
+        rv = iStr -> Read (&mChunkBuffer[mChunkBufferPos], streamLen, &rl);
+        if (NS_FAILED (rv) || rl != streamLen)
+            return rv;
+
+        mChunkBufferPos += streamLen;
+        mChunkBuffer[mChunkBufferPos++] = '\r';
+        mChunkBuffer[mChunkBufferPos++] = '\n';
+        mChunkBuffer[mChunkBufferPos  ] = 0;
+
+        mChunkBufferLength = mChunkBufferPos;
+
+        nsIInputStream * convertedStream = nsnull; 
+        nsIByteArrayInputStream * convertedStreamSup = nsnull;
+
+        rv = NS_NewByteArrayInputStream (&convertedStreamSup, mChunkBuffer, mChunkBufferPos);
+        if (NS_FAILED (rv)) 
+            return rv;
+
+        mChunkBuffer = NULL;
+        mChunkBufferPos = 0;
+
+        rv = convertedStreamSup -> QueryInterface (NS_GET_IID (nsIInputStream), (void**)&convertedStream);
+        NS_RELEASE (convertedStreamSup);
+ 
+        if (NS_FAILED (rv)) 
+            return rv;
+
+        rv = mListener -> OnDataAvailable (request, aContext, convertedStream, aSourceOffset, mChunkBufferLength);
+        
+        if (NS_FAILED (rv))
+            return rv;
+    }
+    else
+    {
+        // DO_UNCHUNKING
+
+        while (mState != CHUNK_STATE_DONE)
+        {
+            switch (mState)
+            {
+                case CHUNK_STATE_INIT:
+                    
+                    if (mChunkBuffer != NULL)
+                    {
+                        nsMemory::Free (mChunkBuffer);
+                        mChunkBuffer = NULL;
+                    }
+
+                    mChunkBufferPos = mChunkBufferLength = 0;
+                    mLenBufCnt = 0;
+                    c = 0;
+
+                    mState = CHUNK_STATE_LENGTH;
+                    break;
+
+                case CHUNK_STATE_FINAL:
+                    // send data upstream
+
+                    {
+                        if (mChunkBufferLength > 0)
+                        {
+                            mState = CHUNK_STATE_INIT;
+
+                            nsCOMPtr<nsIByteArrayInputStream> convertedStreamSup;
+                            rv = NS_NewByteArrayInputStream (getter_AddRefs(convertedStreamSup), mChunkBuffer, mChunkBufferLength);
+                            if (NS_FAILED (rv)) 
+                                return rv;
+
+                            mChunkBuffer = NULL;
+
+                            nsCOMPtr<nsIInputStream> convertedStream = do_QueryInterface (convertedStreamSup, &rv);
+ 
+                            if (NS_FAILED (rv))
+                                return rv;
+
+                            rv = mListener -> OnDataAvailable (request, aContext, convertedStream, aSourceOffset, mChunkBufferLength);
+
+                            if (NS_FAILED (rv))
+                                return rv;
+                        }
+                        else
+                        {
+                            if (mChunkContext)
+                                mChunkContext -> SetEOF (PR_TRUE);
+                            
+                            mState = CHUNK_STATE_DONE;
+                        }
+                    
+                        if (mChunkBuffer != NULL)
+                        {
+                            nsMemory::Free (mChunkBuffer);
+                            mChunkBuffer = NULL;
+                        }
+                    }
+
+                    break;
+
+                case CHUNK_STATE_CR:
+                case CHUNK_STATE_CR_FINAL:
+
+                    if (!streamLen)
+                        return NS_OK;
+
+                    rv = iStr -> Read (&c, 1, &rl);
+                    if (NS_FAILED (rv))
+                        return rv;
+
+                    if (c != '\r' && c != '\n') // be really relaxed here cuz of numerous spec violations
+                        return NS_ERROR_FAILURE;
+                
+                    streamLen--;
+                    mState = mState == CHUNK_STATE_CR ? CHUNK_STATE_LF : CHUNK_STATE_LF_FINAL;
+                    break;
+
+                case CHUNK_STATE_LF:
+                case CHUNK_STATE_LF_FINAL:
+                    
+                    if (c != '\n')
+                    {
+                        if (!streamLen)
+                            return NS_OK;
+
+                        rv = iStr -> Read (&c, 1, &rl);
+                        if (NS_FAILED (rv))
+                            return rv;
+                    }
+
+                    if (c != '\n')
+                        return NS_ERROR_FAILURE;
+
+                    streamLen--;
+                    if (mState == CHUNK_STATE_LF)
+                    {
+                        if (mChunkBufferLength > 0)
+                        {
+                            mChunkBuffer = (char * )nsMemory::Alloc (mChunkBufferLength + 1);
+                            mState = CHUNK_STATE_DATA;
+                        }
+                        else
+                            mState = CHUNK_STATE_CR_FINAL;
+                    }
+                    else
+                        mState = CHUNK_STATE_TRAILER;
+                    
+                    c = 0;
+                    break;
+
+                case CHUNK_STATE_LENGTH:
+                
+                    if (mLenBufCnt >= sizeof (mLenBuf) - 1)
+                        return NS_ERROR_FAILURE;
+
+                    if (!streamLen)
+                        return NS_OK;
+
+                    rv = iStr -> Read (&c, 1, &rl);
+                    if (NS_FAILED (rv))
+                        return rv;
+
+                    streamLen--;
+                
+                    if (isxdigit (c))
+                    {
+                        mLenBuf[mLenBufCnt++] = c;
+                        c = 0;
+                    }
+                    else
+                    if (c == '\r' || c == '\n')
+                    {
+                        if (mLenBufCnt > 0)
+                        {
+                            // ruslan: have to add this due to a lot of spec violations
+                            //      similating what IE does here
+
+                            mLenBuf[mLenBufCnt] = 0;
+                            sscanf (mLenBuf, "%x", &mChunkBufferLength);
+
+                            mState = CHUNK_STATE_LF;
+                        }
+                    }
+                    break;
+            
+                case CHUNK_STATE_DATA:
+                    if (mChunkBufferLength - mChunkBufferPos <= streamLen)
+                    {
+                        // entire chunk
+                        if (!streamLen)
+                            return NS_OK;
+
+                        rv = iStr -> Read (&mChunkBuffer[mChunkBufferPos], mChunkBufferLength - mChunkBufferPos, &rl);
+                        if (NS_FAILED (rv))
+                            return rv;
+
+                        mChunkBufferPos += rl;
+                        mChunkBuffer[mChunkBufferPos++] = 0;
+                        streamLen -= rl;
+                        mState = CHUNK_STATE_CR_FINAL;
+                    }
+                    else
+                    {
+                        if (!streamLen)
+                            return NS_OK;
+
+                        rv = iStr -> Read (&mChunkBuffer[mChunkBufferPos], streamLen, &rl);
+                        if (NS_FAILED (rv))
+                            return rv;
+
+                        mChunkBufferPos += rl;
+                        streamLen -= rl;
+                    }
+                    break;
+                
+                case CHUNK_STATE_TRAILER:
+                    
+                    if (!mChunkContext || mHeadersCount == mChunkContext -> GetTrailerHeaderCount ())
+                        mState = CHUNK_STATE_FINAL;
+                    else
+                        mState = CHUNK_STATE_TRAILER_HEADER;
+
+                    break;
+
+                case CHUNK_STATE_TRAILER_HEADER:
+                    
+                    if (!streamLen)
+                        return NS_OK;
+
+                    rv = iStr -> Read (&c, 1, &rl);
+                    if (NS_FAILED (rv))
+                        return rv;
+
+                    streamLen--;
+                    if (isalnum (c) && mHeaderBufLen < sizeof (mHeaderBuf) - 1)
+                        mHeaderBuf[mHeaderBufLen++] = c;
+                    else
+                    if (c == ':')
+                    {
+                        mHeaderBuf[mHeaderBufLen] = 0;
+                        mState = CHUNK_STATE_TRAILER_VALUE;
+                    }
+                    break;
+                
+                case CHUNK_STATE_TRAILER_VALUE:
+
+                    if (!streamLen)
+                        return NS_OK;
+
+                    rv = iStr -> Read (&c, 1, &rl);
+                    if (NS_FAILED (rv))
+                        return rv;
+
+                    streamLen--;
+
+                    if (isspace (c) && mValueBufLen == 0 || c == '\r')
+                        break;
+                    else
+                    if (c == '\n')
+                    {
+                        mValueBuf[mValueBufLen] = 0;
+                        mHeadersCount++;
+
+                        mChunkContext -> SetResponseHeader (mHeaderBuf, mValueBuf);
+                        mHeaderBufLen = mValueBufLen = 0;
+                        mState = CHUNK_STATE_TRAILER;
+                    }
+                    else
+                    if (mValueBufLen < sizeof (mValueBuf) - 1)
+                        mValueBuf[mValueBufLen++] = c;
+
+                    break;
+            } /* switch */
+        } /* while */
+    } /* DO_UNCHUNKING */
+
+    return NS_OK;
+} /* OnDataAvailable */
+
+
+// XXX/ruslan: need to implement this too
+
+NS_IMETHODIMP
+nsHTTPChunkConv::Convert (
+                          nsIInputStream *aFromStream, 
+                          const PRUnichar *aFromType, 
+                          const PRUnichar *aToType, 
+                          nsISupports *aCtxt, 
+                          nsIInputStream **_retval)
+{ 
+    return NS_ERROR_NOT_IMPLEMENTED;
+} 
+
+nsresult
+NS_NewHTTPChunkConv (nsHTTPChunkConv ** aHTTPChunkConv)
+{
+    NS_PRECONDITION(aHTTPChunkConv != nsnull, "null ptr");
+
+    if (! aHTTPChunkConv)
+        return NS_ERROR_NULL_POINTER;
+
+    *aHTTPChunkConv = new nsHTTPChunkConv ();
+
+    if (! *aHTTPChunkConv)
+        return NS_ERROR_OUT_OF_MEMORY;
+
+    NS_ADDREF(*aHTTPChunkConv);
+    return NS_OK;
+}
+

mozilla/netwerk/streamconv/converters/nsHTTPChunkConv.h

@@ -0,0 +1,190 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+
+#if !defined (__nsHTTPChunkConv__h__)
+#define	__nsHTTPChunkConv__h__	1
+
+#include "nsIStreamConverter.h"
+#include "nsIFactory.h"
+#include "nsCOMPtr.h"
+#include "nsVoidArray.h"
+#include "nsHashtable.h"
+#include "nsString.h"
+
+#include "nsISupportsPrimitives.h"
+
+#define NS_HTTPCHUNKCONVERTER_CID					\
+{													\
+	/* 95ca98d9-2a96-48d6-a014-0dffa84834a1 */		\
+    0x95ca98d9,										\
+    0x2a96,											\
+    0x48d6,											\
+    {0xa0, 0x14, 0x0d, 0xff, 0xa8, 0x48, 0x34, 0xa1}\
+}
+
+static NS_DEFINE_CID(kHTTPChunkConverterCID, NS_HTTPCHUNKCONVERTER_CID);
+
+typedef	enum emum_ChunkMode
+		{
+			DO_CHUNKING, DO_UNCHUNKING
+		}	ChunkMode;
+
+typedef	enum enum_ChunkState
+		{
+			CHUNK_STATE_INIT,
+			CHUNK_STATE_CR,
+			CHUNK_STATE_LF,
+			CHUNK_STATE_LENGTH,
+			CHUNK_STATE_DATA,
+			CHUNK_STATE_CR_FINAL,
+			CHUNK_STATE_LF_FINAL,
+			CHUNK_STATE_FINAL,
+            CHUNK_STATE_TRAILER_HEADER,
+            CHUNK_STATE_TRAILER_VALUE,
+            CHUNK_STATE_TRAILER,
+            CHUNK_STATE_DONE
+		}	ChunkState;
+
+#define	HTTP_CHUNK_TYPE		"chunked"
+#define	HTTP_UNCHUNK_TYPE	"unchunked"
+
+class nsHTTPChunkConvContext;
+
+class nsHTTPChunkConv	: public nsIStreamConverter	{
+public:
+    // nsISupports methods
+    NS_DECL_ISUPPORTS
+
+	NS_DECL_NSISTREAMOBSERVER
+    NS_DECL_NSISTREAMLISTENER
+
+    // nsIStreamConverter methods
+    NS_DECL_NSISTREAMCONVERTER
+
+
+    nsHTTPChunkConv ();
+    virtual ~nsHTTPChunkConv ();
+
+private:
+
+    nsIStreamListener   *mListener; // this guy gets the converted data via his OnDataAvailable ()
+	ChunkState	mState;
+	ChunkMode	 mMode;
+	char *mChunkBuffer;
+	PRUint32	mChunkBufferLength;
+	PRUint32	mChunkBufferPos;
+	
+	char mLenBuf[20];
+	PRUint32	mLenBufCnt;
+    
+    nsCOMPtr<nsISupportsVoid> mAsyncConvContext;
+
+    char        mValueBuf [4096];
+    PRUint32    mValueBufLen;
+
+    char        mHeaderBuf [400];
+    PRUint32    mHeaderBufLen;
+
+    PRUint32    mHeadersCount;
+    PRUint32    mHeadersExpected;
+
+    nsHTTPChunkConvContext  *mChunkContext;
+};
+
+class nsHTTPChunkConvHeaderEntry {
+public:
+
+    nsHTTPChunkConvHeaderEntry (const char *aName, const char* aValue)
+    {
+        mName  = aName;
+        mValue = aValue;
+    }
+
+    ~nsHTTPChunkConvHeaderEntry()
+    {
+    }
+
+    nsCString   mName;
+    nsCString   mValue;
+};
+
+class nsHTTPChunkConvContext    {
+public:
+
+    nsHTTPChunkConvContext ()
+            : mEof (PR_FALSE), mHeadersCount (0)
+    {
+    }
+
+    ~nsHTTPChunkConvContext ()
+    {
+        PRInt32 i = mHeaders.Count ();
+
+        while (i > 0)
+        {
+            nsHTTPChunkConvHeaderEntry *e = (nsHTTPChunkConvHeaderEntry *)mHeaders.RemoveElementAt (i - 1);
+            delete e;
+        }
+    }
+
+    void SetEOF (PRBool eof)
+    {
+        mEof = eof;
+    }
+
+    PRBool  GetEOF ()   {   return mEof;    }
+
+    nsVoidArray * GetAllHeaders ()
+    {
+        return &mHeaders;
+    }
+
+    PRUint32 GetTrailerHeaderCount ()
+    {
+        return mHeadersCount;
+    }
+    
+    void AddTrailerHeader (const char *header)
+    {
+        nsCStringKey key (header);
+        mTrailer.Put (&key, (void *) 1);
+
+        mHeadersCount++;
+    }
+
+    void SetResponseHeader (const char *header, const char *value)
+    {
+        nsHTTPChunkConvHeaderEntry *e = new nsHTTPChunkConvHeaderEntry (header, value);
+        mHeaders.AppendElement (e);
+    }
+
+private:
+
+    PRBool  mEof;
+    nsVoidArray mHeaders;
+    nsHashtable mTrailer;
+
+    PRUint32    mHeadersCount;
+};
+
+
+#endif

mozilla/netwerk/streamconv/converters/nsHTTPCompressConv.cpp

@@ -0,0 +1,471 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): ruslan
+ */
+
+#include "nsHTTPCompressConv.h"
+#include "nsMemory.h"
+#include "plstr.h"
+#include "prlog.h"
+#include "nsIChannel.h"
+#include "nsCOMPtr.h"
+#include "nsIByteArrayInputStream.h"
+#include "nsIStringStream.h"
+
+// nsISupports implementation
+NS_IMPL_THREADSAFE_ISUPPORTS2 (nsHTTPCompressConv, nsIStreamConverter, nsIStreamListener);
+
+// nsFTPDirListingConv methods
+nsHTTPCompressConv::nsHTTPCompressConv ()
+    :   mListener (nsnull),
+        mMode (HTTP_COMPRESS_IDENTITY),
+        mOutBuffer  (NULL), mInpBuffer  (NULL),
+	mOutBufferLen (0),  mInpBufferLen (0),
+        mCheckHeaderDone (PR_FALSE),
+        mGzipStreamEnded (PR_FALSE), mGzipStreamInitialized (PR_FALSE),
+        mLen (0), hMode (0), mSkipCount (0), mFlags (0)
+{
+    NS_INIT_ISUPPORTS ();
+}
+
+nsHTTPCompressConv::~nsHTTPCompressConv ()
+{
+    NS_IF_RELEASE(mListener);
+
+	if (mInpBuffer != NULL)
+		nsMemory::Free (mInpBuffer);
+
+    if (mOutBuffer != NULL)
+		nsMemory::Free (mOutBuffer);
+}
+
+NS_IMETHODIMP
+nsHTTPCompressConv::AsyncConvertData (
+							const PRUnichar *aFromType, 
+							const PRUnichar *aToType, 
+							nsIStreamListener *aListener, 
+							nsISupports *aCtxt)
+{
+	nsString from (aFromType);
+	nsString to   ( aToType );
+
+	char * fromStr = from.ToNewCString ();
+	char *   toStr =   to.ToNewCString ();
+
+	if (!PL_strncasecmp (fromStr, HTTP_COMPRESS_TYPE  , strlen (HTTP_COMPRESS_TYPE  ))
+        ||
+        !PL_strncasecmp (fromStr, HTTP_X_COMPRESS_TYPE, strlen (HTTP_X_COMPRESS_TYPE)))
+        mMode = HTTP_COMPRESS_COMPRESS;
+    else
+	if (!PL_strncasecmp (fromStr, HTTP_GZIP_TYPE   , strlen (HTTP_COMPRESS_TYPE))
+        ||
+        !PL_strncasecmp (fromStr, HTTP_X_GZIP_TYPE , strlen (HTTP_X_GZIP_TYPE)))
+        mMode = HTTP_COMPRESS_GZIP;
+    else
+	if (!PL_strncasecmp (fromStr, HTTP_DEFLATE_TYPE, strlen (HTTP_DEFLATE_TYPE)))
+        mMode = HTTP_COMPRESS_DEFLATE;
+
+	nsMemory::Free (fromStr);
+	nsMemory::Free (  toStr);
+
+    // hook ourself up with the receiving listener. 
+    mListener = aListener;
+    NS_ADDREF (mListener);
+
+    mAsyncConvContext = aCtxt;
+	
+    return NS_OK; 
+} 
+
+NS_IMETHODIMP
+nsHTTPCompressConv::OnStartRequest (nsIRequest* request, nsISupports *aContext)
+{
+    return mListener->OnStartRequest (request, aContext);
+} 
+
+NS_IMETHODIMP
+nsHTTPCompressConv::OnStopRequest(nsIRequest* request, nsISupports *aContext, 
+                                  nsresult aStatus, const PRUnichar* aStatusArg)
+{
+    return mListener->OnStopRequest(request, aContext, aStatus, aStatusArg);
+} 
+
+NS_IMETHODIMP
+nsHTTPCompressConv::OnDataAvailable ( 
+							  nsIRequest* request, 
+							  nsISupports *aContext, 
+							  nsIInputStream *iStr, 
+							  PRUint32 aSourceOffset, 
+							  PRUint32 aCount)
+{
+    nsresult rv = NS_ERROR_FAILURE;
+	PRUint32 streamLen;
+
+    rv = iStr->Available (&streamLen);
+    if (NS_FAILED (rv))
+		return rv;
+
+	if (streamLen == 0 || mGzipStreamEnded)
+		return NS_OK;
+
+    switch (mMode)
+    {
+        case HTTP_COMPRESS_GZIP    :
+            streamLen = check_header (iStr, streamLen, &rv);
+
+            if (rv != NS_OK)
+                return rv;
+
+            if (streamLen == 0)
+                return NS_OK;
+
+        case HTTP_COMPRESS_COMPRESS:
+        case HTTP_COMPRESS_DEFLATE :
+
+            if (mInpBuffer != NULL && streamLen > mInpBufferLen)
+            {
+                mInpBuffer = (unsigned char *) nsMemory::Realloc (mInpBuffer, mInpBufferLen = streamLen);
+               
+                if (mOutBufferLen < streamLen * 2)
+                    mOutBuffer = (unsigned char *) nsMemory::Realloc (mOutBuffer, mOutBufferLen = streamLen * 3);
+
+                if (mInpBuffer == NULL || mOutBuffer == NULL)
+                    return NS_ERROR_OUT_OF_MEMORY;
+            }
+
+            if (mInpBuffer == NULL)
+                mInpBuffer = (unsigned char *) nsMemory::Alloc (mInpBufferLen = streamLen);
+
+            if (mOutBuffer == NULL)
+                mOutBuffer = (unsigned char *) nsMemory::Alloc (mOutBufferLen = streamLen * 3);
+
+            if (mInpBuffer == NULL || mOutBuffer == NULL)
+                return NS_ERROR_OUT_OF_MEMORY;
+
+            iStr->Read ((char *)mInpBuffer, streamLen, &rv);
+
+            if (NS_FAILED (rv))
+                return rv;
+
+            if (mMode == HTTP_COMPRESS_COMPRESS)
+            {
+                unsigned long uLen = mOutBufferLen;
+                int code = uncompress (mOutBuffer, &uLen, mInpBuffer, mInpBufferLen);
+                if (code == Z_BUF_ERROR)
+                {
+                    mOutBuffer = (unsigned char *) nsMemory::Realloc (mOutBuffer, mOutBufferLen *= 3);
+                    if (mOutBuffer == NULL)
+                        return NS_ERROR_OUT_OF_MEMORY;
+                    
+                    code = uncompress (mOutBuffer, &uLen, mInpBuffer, mInpBufferLen);
+                }
+                if (code != Z_OK)
+                    return NS_ERROR_FAILURE;
+
+                rv = do_OnDataAvailable (request, aContext, aSourceOffset, (char *)mOutBuffer, (PRUint32) uLen);
+                if (NS_FAILED (rv))
+                    return rv;
+
+            }
+            else
+            {
+                if (!mGzipStreamInitialized)
+                {
+                    memset (&d_stream, 0, sizeof (d_stream));
+                
+                    if (inflateInit2 (&d_stream, -MAX_WBITS) != Z_OK)
+                        return NS_ERROR_FAILURE;
+
+                    mGzipStreamInitialized = PR_TRUE;
+                }
+
+                d_stream.next_in  = mInpBuffer;
+                d_stream.avail_in = (uInt)streamLen;
+
+                for ( ; ; )
+                {
+                    d_stream.next_out  = mOutBuffer;
+                    d_stream.avail_out = (uInt)mOutBufferLen;
+ 
+                    int code = inflate  (&d_stream, Z_NO_FLUSH);
+                    unsigned bytesWritten = (uInt)mOutBufferLen - d_stream.avail_out;
+
+                    if (code == Z_STREAM_END)
+                    {
+                        if (bytesWritten)
+                        {
+                            rv = do_OnDataAvailable (request, aContext, aSourceOffset, (char *)mOutBuffer, bytesWritten);
+                            if (NS_FAILED (rv))
+                                return rv;
+                        }
+                        
+                        inflateEnd (&d_stream);
+                        mGzipStreamEnded = PR_TRUE;
+                        break;
+                    }
+                    else
+                    if (code == Z_OK)
+                    {
+                        if (bytesWritten)
+                        {
+                            rv = do_OnDataAvailable (request, aContext, aSourceOffset, (char *)mOutBuffer, bytesWritten);
+                            if (NS_FAILED (rv))
+                                return rv;
+                        }
+                    }
+                    else
+                    if (code == Z_BUF_ERROR)
+                    {
+                        if (bytesWritten)
+                        {
+                            rv = do_OnDataAvailable (request, aContext, aSourceOffset, (char *)mOutBuffer, bytesWritten);
+                            if (NS_FAILED (rv))
+                                return rv;
+                        }
+                        break;
+                    }
+                    else
+                        return NS_ERROR_FAILURE;
+                } /* for */
+            } /* gzip */
+            break;
+
+        default: 
+            rv = mListener->OnDataAvailable (request, aContext, iStr, aSourceOffset, aCount);
+			if (NS_FAILED (rv))
+			    return rv;
+    } /* switch */
+
+	return NS_OK;
+} /* OnDataAvailable */
+
+
+// XXX/ruslan: need to implement this too
+
+NS_IMETHODIMP
+nsHTTPCompressConv::Convert (
+						  nsIInputStream *aFromStream, 
+						  const PRUnichar *aFromType, 
+						  const PRUnichar *aToType, 
+						  nsISupports *aCtxt, 
+						  nsIInputStream **_retval)
+{ 
+    return NS_ERROR_NOT_IMPLEMENTED;
+} 
+
+nsresult
+nsHTTPCompressConv::do_OnDataAvailable (nsIRequest* request, nsISupports *aContext, PRUint32 aSourceOffset, char *buffer, PRUint32 aCount)
+{
+	nsresult rv;
+
+	nsCOMPtr<nsIByteArrayInputStream> convertedStreamSup;
+
+	char * lBuf = (char *) nsMemory::Alloc (aCount);
+	if (lBuf == NULL)
+		return NS_ERROR_OUT_OF_MEMORY;
+
+	memcpy (lBuf, buffer, aCount);
+
+	rv = NS_NewByteArrayInputStream (getter_AddRefs(convertedStreamSup), lBuf, aCount);
+	if (NS_FAILED (rv))
+	    return rv;
+
+	nsCOMPtr<nsIInputStream> convertedStream = do_QueryInterface (convertedStreamSup, &rv);
+	if (NS_FAILED (rv))
+	    return rv;
+
+	rv = mListener->OnDataAvailable (request, aContext, convertedStream, aSourceOffset, aCount);
+
+	return rv;
+}
+
+#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
+#define HEAD_CRC     0x02 /* bit 1 set: header CRC present */
+#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
+#define COMMENT      0x10 /* bit 4 set: file comment present */
+#define RESERVED     0xE0 /* bits 5..7: reserved */
+
+static unsigned gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */
+
+PRUint32
+nsHTTPCompressConv::check_header (nsIInputStream *iStr, PRUint32 streamLen, nsresult *rs)
+{
+    nsresult rv;
+    enum  { GZIP_INIT = 0, GZIP_OS, GZIP_EXTRA0, GZIP_EXTRA1, GZIP_EXTRA2, GZIP_ORIG, GZIP_COMMENT, GZIP_CRC };
+    char c;
+
+    *rs = NS_OK;
+
+    if (mCheckHeaderDone)
+        return streamLen;
+
+    while (streamLen)
+    {
+        switch (hMode)
+        {
+            case GZIP_INIT:
+                iStr->Read (&c, 1, &rv);
+                streamLen--;
+                
+                if (mSkipCount == 0 && ((unsigned)c & 0377) != gz_magic[0])
+                {
+                    *rs = NS_ERROR_FAILURE;
+                    return 0;
+                }
+
+                if (mSkipCount == 1 && ((unsigned)c & 0377) != gz_magic[1])
+                {
+                    *rs = NS_ERROR_FAILURE;
+                    return 0;
+                }
+
+                if (mSkipCount == 2 && ((unsigned)c & 0377) != Z_DEFLATED)
+                {
+                    *rs = NS_ERROR_FAILURE;
+                    return 0;
+                }
+
+                mSkipCount++;
+                if (mSkipCount == 4)
+                {
+                    mFlags = (unsigned) c & 0377;
+                    if (mFlags & RESERVED)
+                    {
+                        *rs = NS_ERROR_FAILURE;
+                        return 0;
+                    }
+                    hMode = GZIP_OS;
+                    mSkipCount = 0;
+                }
+                break;
+
+            case GZIP_OS  :
+                iStr->Read (&c, 1, &rv);
+                streamLen--;
+                mSkipCount++;
+
+                if (mSkipCount == 6)
+                    hMode = GZIP_EXTRA0;
+                break;
+        
+            case GZIP_EXTRA0:
+                if (mFlags & EXTRA_FIELD)
+                {
+                    iStr->Read (&c, 1, &rv);
+                    streamLen--;
+                    mLen = (uInt) c & 0377;
+                    hMode = GZIP_EXTRA1;
+                }
+                else
+                    hMode = GZIP_ORIG;
+                break;
+
+            case GZIP_EXTRA1:
+                iStr->Read (&c, 1, &rv);
+                streamLen--;
+                mLen = ((uInt) c & 0377) << 8;
+                mSkipCount = 0;
+                hMode = GZIP_EXTRA2;
+                break;
+
+            case GZIP_EXTRA2:
+                if (mSkipCount == mLen)
+                    hMode = GZIP_ORIG;
+                else
+                {
+                    iStr->Read (&c, 1, &rv);
+                    streamLen--;
+                    mSkipCount++;
+                }
+                break;
+
+            case GZIP_ORIG:
+                if (mFlags & ORIG_NAME)
+                {
+                    iStr->Read (&c, 1, &rv);
+                    streamLen--;
+                    if (c == 0)
+                        hMode = GZIP_COMMENT;
+                }
+                else
+                    hMode = GZIP_COMMENT;
+                break;
+
+            case GZIP_COMMENT:
+                if (mFlags & GZIP_COMMENT)
+                {
+                    iStr->Read (&c, 1, &rv);
+                    streamLen--;
+                    if (c == 0)
+                    {
+                        hMode = GZIP_CRC;
+                        mSkipCount = 0;
+                    }
+                }
+                else
+                {
+                    hMode = GZIP_CRC;
+                    mSkipCount = 0;
+                }
+                break;
+
+           case GZIP_CRC:
+                if (mFlags & HEAD_CRC)
+                {
+                    iStr->Read (&c, 1, &rv);
+                    streamLen--;
+                    mSkipCount++;
+                    if (mSkipCount == 2)
+                    {
+                        mCheckHeaderDone = PR_TRUE;
+                        return streamLen;
+                    }
+                }
+                else
+                {
+                    mCheckHeaderDone = PR_TRUE;
+                    return streamLen;
+                }
+            break;
+        }
+    }
+    return streamLen;
+}
+
+
+nsresult
+NS_NewHTTPCompressConv (nsHTTPCompressConv ** aHTTPCompressConv)
+{
+    NS_PRECONDITION(aHTTPCompressConv != nsnull, "null ptr");
+
+    if (! aHTTPCompressConv)
+        return NS_ERROR_NULL_POINTER;
+
+    *aHTTPCompressConv = new nsHTTPCompressConv ();
+
+    if (! *aHTTPCompressConv)
+        return NS_ERROR_OUT_OF_MEMORY;
+
+    NS_ADDREF(*aHTTPCompressConv);
+    return NS_OK;
+}
+
+

mozilla/netwerk/streamconv/converters/nsHTTPCompressConv.h

@@ -0,0 +1,99 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+
+#if !defined (__nsHTTPCompressConv__h__)
+#define	__nsHTTPCompressConv__h__	1
+
+#include "nsIStreamConverter.h"
+#include "nsIFactory.h"
+#include "nsCOMPtr.h"
+
+#include "zlib.h"
+
+#define NS_HTTPCOMPRESSCONVERTER_CID                \
+{                                                   \
+    /* 66230b2b-17fa-4bd3-abf4-07986151022d */      \
+    0x66230b2b,                                     \
+    0x17fa,                                         \
+    0x4bd3,                                         \
+    {0xab, 0xf4, 0x07, 0x98, 0x61, 0x51, 0x02, 0x2d}\
+}
+
+static NS_DEFINE_CID(kHTTPCompressConverterCID, NS_HTTPCOMPRESSCONVERTER_CID);
+
+#define	HTTP_DEFLATE_TYPE		"deflate"
+#define	HTTP_GZIP_TYPE	        "gzip"
+#define	HTTP_X_GZIP_TYPE	    "x-gzip"
+#define	HTTP_COMPRESS_TYPE	    "compress"
+#define	HTTP_X_COMPRESS_TYPE	"x-compress"
+#define	HTTP_IDENTITY_TYPE	    "identity"
+#define	HTTP_UNCOMPRESSED_TYPE	"uncompressed"
+
+typedef enum    {
+        HTTP_COMPRESS_GZIP,
+        HTTP_COMPRESS_DEFLATE,
+        HTTP_COMPRESS_COMPRESS,
+        HTTP_COMPRESS_IDENTITY
+    }   CompressMode;
+
+class nsHTTPCompressConv	: public nsIStreamConverter	{
+public:
+    // nsISupports methods
+    NS_DECL_ISUPPORTS
+
+	NS_DECL_NSISTREAMOBSERVER
+    NS_DECL_NSISTREAMLISTENER
+
+    // nsIStreamConverter methods
+    NS_DECL_NSISTREAMCONVERTER
+
+
+    nsHTTPCompressConv ();
+    virtual ~nsHTTPCompressConv ();
+
+private:
+
+    nsIStreamListener   *mListener; // this guy gets the converted data via his OnDataAvailable ()
+	CompressMode        mMode;
+
+    unsigned char *mOutBuffer;
+    unsigned char *mInpBuffer;
+
+    PRUint32	mOutBufferLen;
+    PRUint32	mInpBufferLen;
+	
+    nsCOMPtr<nsISupports>   mAsyncConvContext;
+
+    nsresult do_OnDataAvailable (nsIRequest *request, nsISupports *aContext, PRUint32 aSourceOffset, char *buffer, PRUint32 aCount);
+
+    PRBool      mCheckHeaderDone;
+    PRBool      mGzipStreamEnded;
+    PRBool      mGzipStreamInitialized;
+
+    z_stream d_stream;
+    unsigned mLen, hMode, mSkipCount, mFlags;
+
+    PRUint32 check_header (nsIInputStream *iStr, PRUint32 streamLen, nsresult *rv);
+};
+
+
+#endif

mozilla/netwerk/streamconv/converters/nsMultiMixedConv.cpp

@@ -0,0 +1,573 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+
+#include "nsMultiMixedConv.h"
+#include "nsMemory.h"
+#include "plstr.h"
+#include "nsIHTTPChannel.h"
+#include "nsIAtom.h"
+#include "nsIServiceManager.h"
+#include "nsNetUtil.h"
+#include "nsMimeTypes.h"
+#include "nsIByteArrayInputStream.h"
+
+// nsISupports implementation
+NS_IMPL_THREADSAFE_ISUPPORTS3(nsMultiMixedConv,
+                              nsIStreamConverter, 
+							  nsIStreamListener,
+                              nsIStreamObserver);
+
+
+// nsIStreamConverter implementation
+
+// No syncronous conversion at this time.
+NS_IMETHODIMP
+nsMultiMixedConv::Convert(nsIInputStream *aFromStream,
+                          const PRUnichar *aFromType,
+                          const PRUnichar *aToType,
+                          nsISupports *aCtxt, nsIInputStream **_retval) {
+    return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+// Stream converter service calls this to initialize the actual stream converter (us).
+NS_IMETHODIMP
+nsMultiMixedConv::AsyncConvertData(const PRUnichar *aFromType, const PRUnichar *aToType,
+                                   nsIStreamListener *aListener, nsISupports *aCtxt) {
+    NS_ASSERTION(aListener && aFromType && aToType, "null pointer passed into multi mixed converter");
+
+    // hook up our final listener. this guy gets the various On*() calls we want to throw
+    // at him.
+    //
+    // WARNING: this listener must be able to handle multiple OnStartRequest, OnDataAvail()
+    //  and OnStopRequest() call combinations. We call of series of these for each sub-part
+    //  in the raw stream.
+    mFinalListener = aListener;
+    return NS_OK;
+}
+
+#define ERR_OUT { nsMemory::Free(buffer); return rv; }
+
+// nsIStreamListener implementation
+NS_IMETHODIMP
+nsMultiMixedConv::OnDataAvailable(nsIRequest *request, nsISupports *context,
+                                  nsIInputStream *inStr, PRUint32 sourceOffset, PRUint32 count) {
+    nsresult rv = NS_OK;
+    char *buffer = nsnull;
+    PRUint32 bufLen = count, read;
+
+    NS_ASSERTION(request, "multimixed converter needs a request");
+
+    nsCOMPtr<nsIChannel> channel = do_QueryInterface(request, &rv);
+    if (NS_FAILED(rv)) return rv;
+    
+    buffer = (char*)nsMemory::Alloc(bufLen);
+    if (!buffer) return NS_ERROR_OUT_OF_MEMORY;
+
+    rv = inStr->Read(buffer, bufLen, &read);
+    if (NS_FAILED(rv) || read == 0) return rv;
+    NS_ASSERTION(read == bufLen, "poor data size assumption");
+
+    if (mBufLen) {
+		// incorporate any buffered data into the parsing
+        char *tmp = (char*)nsMemory::Alloc(mBufLen + bufLen);
+        if (!tmp) {
+            nsMemory::Free(buffer);
+            return NS_ERROR_OUT_OF_MEMORY;
+        }
+        nsCRT::memcpy(tmp, mBuffer, mBufLen);
+        nsMemory::Free(mBuffer);
+        mBuffer = nsnull;
+        nsCRT::memcpy(tmp+mBufLen, buffer, bufLen);
+        nsMemory::Free(buffer);
+        buffer = tmp;
+        bufLen += mBufLen;
+        mBufLen = 0;
+    }
+
+    if (mFirstOnData) {
+        // this is the first OnData() for this request. some servers
+        // don't bother sending a token in the first "part." This is
+        // illegal, but we'll handle the case anyway by shoving the
+        // boundary token in for the server.
+        mFirstOnData = PR_FALSE;
+        NS_ASSERTION(!mBufLen, "this is our first time through, we can't have buffered data");
+        const char * token = mToken;
+
+        if (bufLen < mTokenLen+2) {
+            // we don't have enough data yet to make this comparison.
+            // skip this check, and try again the next time OnData()
+            // is called.
+            mFirstOnData = PR_TRUE;
+        } else if (!PL_strnstr(buffer, token, mTokenLen+2)) {
+            bufLen = read + mTokenLen + 1;
+            char *tmp = (char*)nsMemory::Alloc(bufLen);
+            if (!tmp) {
+                nsMemory::Free(buffer);
+                return NS_ERROR_OUT_OF_MEMORY;
+            }
+            nsCRT::memcpy(tmp, token, mTokenLen);
+            nsCRT::memcpy(tmp+mTokenLen, "\n", 1);
+            nsCRT::memcpy(tmp+mTokenLen+1, buffer, read);
+            nsMemory::Free(buffer);
+            buffer = tmp;
+        }
+    }
+
+    char *cursor = buffer, *token = nsnull;
+
+    if (mProcessingHeaders) {
+        // we were not able to process all the headers
+        // for this "part" given the previous buffer given to 
+        // us in the previous OnDataAvailable callback.
+        PRBool done = PR_FALSE;
+		rv = ParseHeaders(channel, cursor, bufLen, &done);
+		if (NS_FAILED(rv)) ERR_OUT
+
+        if (done) {
+            mProcessingHeaders = PR_FALSE;
+            rv = SendStart(channel);
+            if (NS_FAILED(rv)) ERR_OUT
+        }
+    }
+
+    PRInt8 tokenLinefeed = 1;
+    while ( (token = FindToken(cursor, bufLen)) ) {
+
+        if (*(token+mTokenLen+1) == '-') {
+			// This was the last delimiter so we can stop processing
+            bufLen = token - cursor;
+            rv = SendData(cursor, bufLen);
+            nsMemory::Free(buffer);
+            if (NS_FAILED(rv)) return rv;
+            buffer = nsnull;
+            bufLen = 0;
+            return SendStop(NS_OK, nsnull);
+        }
+
+        if (!mNewPart && token > cursor) {
+			// headers are processed, we're pushing data now.
+			NS_ASSERTION(!mProcessingHeaders, "we should be pushing raw data");
+            rv = SendData(cursor, token - cursor);
+            bufLen -= token - cursor;
+            if (NS_FAILED(rv)) ERR_OUT
+        }
+        token += mTokenLen;
+        bufLen -= mTokenLen;
+        tokenLinefeed = PushOverLine(token, bufLen);
+
+        if (mNewPart) {
+            // parse headers
+            mNewPart = PR_FALSE;
+            cursor = token;
+            PRBool done = PR_FALSE; 
+            rv = ParseHeaders(channel, cursor, bufLen, &done);
+            if (NS_FAILED(rv)) ERR_OUT
+            if (done) {
+                rv = SendStart(channel);
+                if (NS_FAILED(rv)) ERR_OUT
+            } else {
+                // we haven't finished processing header info.
+                // we'll break out and try to process later.
+                mProcessingHeaders = PR_TRUE;
+                break;
+            }
+        } else {
+            mNewPart = PR_TRUE;
+            rv = SendStop(NS_OK, nsnull);
+            if (NS_FAILED(rv)) ERR_OUT
+            // reset to the token to front.
+            // this allows us to treat the token
+            // as a starting token.
+            token -= mTokenLen + tokenLinefeed;
+            bufLen += mTokenLen + tokenLinefeed;
+            cursor = token;
+        }
+    }
+
+    // at this point, we want to buffer up whatever amount (bufLen)
+    // we have leftover. However, we *always* want to ensure that
+    // we buffer enough data to handle a broken token.
+
+    // carry over
+    PRUint32 bufAmt = 0;
+    if (mProcessingHeaders) {
+        bufAmt = bufLen;
+    } else {
+        // if the data ends in a linefeed, we
+        // know the token can't cross it, thus
+        // we know there's no token left - don't buffer
+        if (!(cursor[bufLen-1] == LF))
+            bufAmt = PR_MIN(mTokenLen - 1, bufLen);
+    }
+
+    if (bufAmt) {
+        rv = BufferData(cursor + (bufLen - bufAmt), bufAmt);
+        if (NS_FAILED(rv)) ERR_OUT
+        bufLen -= bufAmt;
+    }
+
+    if (bufLen) {
+        rv = SendData(cursor, bufLen);
+        if (NS_FAILED(rv)) ERR_OUT
+    }
+
+    nsMemory::Free(buffer);
+
+    return rv;
+}
+
+
+// nsIStreamObserver implementation
+NS_IMETHODIMP
+nsMultiMixedConv::OnStartRequest(nsIRequest *request, nsISupports *ctxt) {
+	// we're assuming the content-type is available at this stage
+	NS_ASSERTION(!mToken, "a second on start???");
+    char *bndry = nsnull;
+    nsXPIDLCString delimiter;
+    nsresult rv = NS_OK;
+    mContext = ctxt;
+
+    mFirstOnData = PR_TRUE;
+
+    nsCOMPtr<nsIChannel> channel = do_QueryInterface(request, &rv);
+    if (NS_FAILED(rv)) return rv;
+    
+    // ask the HTTP channel for the content-type and extract the boundary from it.
+    nsCOMPtr<nsIHTTPChannel> httpChannel = do_QueryInterface(channel, &rv);
+    if (NS_SUCCEEDED(rv)) {
+        nsCOMPtr<nsIAtom> header = NS_NewAtom("content-type");
+        if (!header) return NS_ERROR_OUT_OF_MEMORY;
+        rv = httpChannel->GetResponseHeader(header, getter_Copies(delimiter));
+        if (NS_FAILED(rv)) return rv;
+    } else {
+        // try asking the channel directly
+        rv = channel->GetContentType(getter_Copies(delimiter));
+        if (!delimiter || NS_FAILED(rv)) return NS_ERROR_FAILURE;
+    }
+
+    if (!delimiter) return NS_ERROR_FAILURE;
+    bndry = PL_strstr(delimiter, "boundary");
+    if (!bndry) return NS_ERROR_FAILURE;
+
+    bndry = PL_strchr(bndry, '=');
+    if (!bndry) return NS_ERROR_FAILURE;
+
+    bndry++; // move past the equals sign
+
+    char *attrib = PL_strchr(bndry, ';');
+    if (attrib) *attrib = '\0';
+
+    nsCAutoString boundaryString(bndry);
+    if (attrib) *attrib = ';';
+
+    boundaryString.Trim(" \"");
+
+    mToken = boundaryString.get();
+    if (!mToken) return NS_ERROR_OUT_OF_MEMORY;
+    mTokenLen = boundaryString.Length();
+    return NS_OK;
+}
+
+NS_IMETHODIMP
+nsMultiMixedConv::OnStopRequest(nsIRequest *request, nsISupports *ctxt,
+                                nsresult aStatus, const PRUnichar* aStatusArg) {
+    if (mPartChannel) {
+        // we've already called SendStart() (which sets up the mPartChannel,
+        // and fires an OnStart()) send any data left over, and then fire the stop.
+        if (mBufLen > 0 && mBuffer) {
+            (void) SendData(mBuffer, mBufLen);
+            // don't bother checking the return value here, if the send failed
+            // we're done anyway as we're in the OnStop() callback.
+            nsMemory::Free(mBuffer);
+            mBuffer = nsnull;
+            mBufLen = 0;
+        }
+        (void) SendStop(aStatus, aStatusArg);
+    } else if (NS_FAILED(aStatus)) {
+        // underlying data production problem. we should not be in
+        // the middle of sending data. if we were, mPartChannel,
+        // above, would have been true.
+        (void) mFinalListener->OnStartRequest(request, ctxt);
+        (void) mFinalListener->OnStopRequest(request, ctxt, aStatus, aStatusArg);
+    }
+
+    return NS_OK;
+}
+
+
+// nsMultiMixedConv methods
+nsMultiMixedConv::nsMultiMixedConv() {
+    NS_INIT_ISUPPORTS();
+    mTokenLen           = 0;
+    mNewPart            = PR_TRUE;
+    mContentLength      = -1;
+    mBuffer             = nsnull;
+    mBufLen             = 0;
+    mProcessingHeaders  = PR_FALSE;
+}
+
+nsMultiMixedConv::~nsMultiMixedConv() {
+    NS_ASSERTION(!mBuffer, "all buffered data should be gone");
+}
+
+nsresult
+nsMultiMixedConv::BufferData(char *aData, PRUint32 aLen) {
+    NS_ASSERTION(!mBuffer, "trying to over-write buffer");
+
+    char *buffer = (char*)nsMemory::Alloc(aLen);
+    if (!buffer) return NS_ERROR_OUT_OF_MEMORY;
+
+    nsCRT::memcpy(buffer, aData, aLen);
+    mBuffer = buffer;
+    mBufLen = aLen;
+    return NS_OK;
+}
+
+
+nsresult
+nsMultiMixedConv::SendStart(nsIChannel *aChannel) {
+	nsresult rv = NS_OK;
+
+    // First build up a dummy uri.
+    nsCOMPtr<nsIURI> partURI;
+    rv = aChannel->GetURI(getter_AddRefs(partURI));
+    if (NS_FAILED(rv)) return rv;
+
+    if (mContentType.IsEmpty())
+        mContentType = UNKNOWN_CONTENT_TYPE;
+
+    // if we already have an mPartChannel, that means we never sent a Stop()
+    // before starting up another "part." that would be bad.
+    NS_ASSERTION(!mPartChannel, "tisk tisk, shouldn't be overwriting a channel");
+
+    rv = NS_NewInputStreamChannel(getter_AddRefs(mPartChannel), 
+                                                 partURI, 
+                                                 nsnull,       // inStr
+                                                 mContentType.get(), 
+                                                 mContentLength);
+    if (NS_FAILED(rv)) return rv;
+
+    nsLoadFlags loadFlags = 0;
+    mPartChannel->GetLoadAttributes(&loadFlags);
+    loadFlags |= nsIChannel::LOAD_REPLACE;
+    mPartChannel->SetLoadAttributes(loadFlags);
+
+	nsCOMPtr<nsILoadGroup> loadGroup;
+    (void)aChannel->GetLoadGroup(getter_AddRefs(loadGroup));
+    // Add the new channel to the load group (if any)
+    if (loadGroup) {
+        rv = mPartChannel->SetLoadGroup(loadGroup);
+        if (NS_FAILED(rv)) return rv;
+        rv = loadGroup->AddRequest(mPartChannel, nsnull);
+        if (NS_FAILED(rv)) return rv;
+    }
+
+    // Let's start off the load. NOTE: we don't forward on the channel passed
+    // into our OnDataAvailable() as it's the root channel for the raw stream.
+    return mFinalListener->OnStartRequest(mPartChannel, mContext);
+}
+
+
+nsresult
+nsMultiMixedConv::SendStop(nsresult aStatus, const PRUnichar* aStatusArg) {
+    
+    nsresult rv = NS_OK;
+    if (mPartChannel) {
+        rv = mFinalListener->OnStopRequest(mPartChannel, mContext, aStatus, aStatusArg);
+        // don't check for failure here, we need to remove the channel from 
+        // the loadgroup.
+
+        // Remove the channel from its load group (if any)
+        nsCOMPtr<nsILoadGroup> loadGroup;
+        (void) mPartChannel->GetLoadGroup(getter_AddRefs(loadGroup));
+        if (loadGroup) 
+            (void) loadGroup->RemoveRequest(mPartChannel, mContext, aStatus, aStatusArg);
+    }
+
+    mPartChannel = 0;
+    return rv;
+}
+
+nsresult
+nsMultiMixedConv::SendData(char *aBuffer, PRUint32 aLen) {
+
+    nsresult rv = NS_OK;
+    
+    if (!mPartChannel) return NS_ERROR_FAILURE; // something went wrong w/ processing
+
+    char *tmp = (char*)nsMemory::Alloc(aLen); // byteArray stream owns this mem
+    if (!tmp) return NS_ERROR_OUT_OF_MEMORY;
+    
+    nsCRT::memcpy(tmp, aBuffer, aLen);
+    
+    nsCOMPtr<nsIByteArrayInputStream> byteArrayStream;
+    
+    rv = NS_NewByteArrayInputStream(getter_AddRefs(byteArrayStream), tmp, aLen);
+    if (NS_FAILED(rv)) {
+        nsMemory::Free(tmp);
+        return rv;
+    }
+
+    nsCOMPtr<nsIInputStream> inStream = do_QueryInterface(byteArrayStream, &rv);
+    if (NS_FAILED(rv)) return rv;
+
+    PRUint32 len;
+    rv = inStream->Available(&len);
+    if (NS_FAILED(rv)) return rv;
+
+    return mFinalListener->OnDataAvailable(mPartChannel, mContext, inStream, 0, len);
+}
+
+PRInt8 
+nsMultiMixedConv::PushOverLine(char *&aPtr, PRUint32 &aLen) {
+    PRInt8 chars = 0;
+    if (*aPtr == CR || *aPtr == LF) {
+        if (aPtr[1] == LF)
+            chars++;
+        chars++;
+    }
+    aPtr += chars;
+    aLen -= chars;
+    return chars;
+}
+
+nsresult
+nsMultiMixedConv::ParseHeaders(nsIChannel *aChannel, char *&aPtr, 
+                               PRUint32 &aLen, PRBool *_retval) {
+    // NOTE: this data must be ascii.
+	nsresult rv = NS_OK;
+    char *cursor = aPtr, *newLine = nsnull;
+    PRUint32 cursorLen = aLen;
+    PRBool done = PR_FALSE;
+    PRUint8 lineFeedIncrement = 1;
+
+    while ( (cursorLen > 0) 
+            && (newLine = PL_strchr(cursor, LF)) ) {
+        // adjust for linefeeds
+        if ( (newLine > cursor) && (newLine[-1] == CR) ) { // CRLF
+             lineFeedIncrement = 2;
+             newLine--;
+        }
+
+        if (newLine == cursor) {
+            // move the newLine beyond the double linefeed marker
+            if ( (newLine - cursor) < ((PRInt32)cursorLen - lineFeedIncrement) ) {
+                newLine += lineFeedIncrement;
+            }
+            cursorLen -= (newLine - cursor);
+            cursor = newLine;
+
+            done = PR_TRUE;
+            break;
+        }
+
+        char tmpChar = *newLine;
+        *newLine = '\0';
+        char *colon = PL_strchr(cursor, ':');
+        if (colon) {
+            *colon = '\0';
+            nsCAutoString headerStr(cursor);
+            headerStr.CompressWhitespace();
+            headerStr.ToLowerCase();
+            nsCOMPtr<nsIAtom> header = NS_NewAtom(headerStr.get());
+            if (!header) return NS_ERROR_OUT_OF_MEMORY;
+            *colon = ':';
+
+            nsCAutoString headerVal(colon + 1);
+            headerVal.CompressWhitespace();
+
+            // examine header
+            if (headerStr.Equals("content-type")) {
+                mContentType = headerVal;
+            } else if (headerStr.Equals("content-length")) {
+                mContentLength = atoi(headerVal.get());
+            } else if (headerStr.Equals("set-cookie")) {
+                // setting headers on the HTTP channel
+                // causes HTTP to notify, again if necessary,
+                // it's header observers.
+                nsCOMPtr<nsIHTTPChannel> httpChannel = do_QueryInterface(aChannel);
+                if (httpChannel) {
+                    rv = httpChannel->SetResponseHeader(header, headerVal);
+                    if (NS_FAILED(rv)) return rv;
+                }
+            }
+        }
+        *newLine = tmpChar;
+        newLine += lineFeedIncrement;
+        cursorLen -= (newLine - cursor);
+        cursor = newLine;
+    } // end while (newLine)
+
+    aPtr = cursor;
+    aLen = cursorLen;
+
+	*_retval = done;
+    return rv;
+}
+
+char *
+nsMultiMixedConv::FindToken(char *aCursor, PRUint32 aLen) {
+    // strnstr without looking for null termination
+    const char *token = mToken;
+    char *cur = aCursor;
+
+	NS_ASSERTION(token && aCursor && *token, "bad data");
+
+    if( mTokenLen > aLen ) return nsnull;
+
+    for( ; aLen >= mTokenLen; aCursor++, aLen-- )
+        if( *token == *aCursor)
+            if(!memcmp(aCursor, token, mTokenLen) ) {
+                if ( (aCursor - cur) >= 2) {
+                    // back the cursor up over a double dash for backwards compat.
+                    if ( (*(aCursor-1) == '-') && (*(aCursor-2) == '-') ) {
+                        aCursor -= 2;
+                        aLen += 2;
+
+                        // we're playing w/ double dash tokens, adjust.
+                        nsCString newToken("--");
+                        newToken.Append(mToken);
+                        mToken = newToken.get();
+                        mTokenLen += 2;
+                    }
+                }
+                return aCursor;
+            }
+
+    return nsnull;
+}
+
+nsresult
+NS_NewMultiMixedConv(nsMultiMixedConv** aMultiMixedConv)
+{
+    NS_PRECONDITION(aMultiMixedConv != nsnull, "null ptr");
+    if (! aMultiMixedConv)
+        return NS_ERROR_NULL_POINTER;
+
+    *aMultiMixedConv = new nsMultiMixedConv();
+    if (! *aMultiMixedConv)
+        return NS_ERROR_OUT_OF_MEMORY;
+
+    NS_ADDREF(*aMultiMixedConv);
+    return NS_OK;
+}
+

mozilla/netwerk/streamconv/converters/nsMultiMixedConv.h

@@ -0,0 +1,117 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+#ifndef __nsmultimixedconv__h__
+#define __nsmultimixedconv__h__
+
+#include "nsIStreamConverter.h"
+#include "nsIChannel.h"
+#include "nsIURI.h"
+#include "nsString.h"
+#include "nsXPIDLString.h"
+#include "nsCOMPtr.h"
+
+#define NS_MULTIMIXEDCONVERTER_CID                         \
+{ /* 7584CE90-5B25-11d3-A175-0050041CAF44 */         \
+    0x7584ce90,                                      \
+    0x5b25,                                          \
+    0x11d3,                                          \
+    {0xa1, 0x75, 0x0, 0x50, 0x4, 0x1c, 0xaf, 0x44}       \
+}
+static NS_DEFINE_CID(kMultiMixedConverterCID,          NS_MULTIMIXEDCONVERTER_CID);
+
+// The nsMultiMixedConv stream converter converts a stream of type "multipart/x-mixed-replace"
+// to it's subparts. There was some debate as to whether or not the functionality desired
+// when HTTP confronted this type required a stream converter. After all, this type really
+// prompts various viewer related actions rather than stream conversion. There simply needs
+// to be a piece in place that can strip out the multiple parts of a stream of this type, and 
+// "display" them accordingly.
+//
+// With that said, this "stream converter" spends more time packaging up the sub parts of the
+// main stream and sending them off the destination stream listener, than doing any real
+// stream parsing/converting.
+//
+// WARNING: This converter requires that it's destination stream listener be able to handle
+//   multiple OnStartRequest(), OnDataAvailable(), and OnStopRequest() call combinations.
+//   Each series represents the beginning, data production, and ending phase of each sub-
+//   part of the original stream.
+//
+// NOTE: this MIME-type is used by HTTP, *not* SMTP, or IMAP.
+//
+// NOTE: For reference, a general description of how this MIME type should be handled via
+//   HTTP, see http://home.netscape.com/assist/net_sites/pushpull.html . Note that
+//   real world server content deviates considerably from this overview.
+//
+// Implementation assumptions:
+//  Assumed structue:
+//  --BoundaryToken[\r]\n
+//  content-type: foo/bar[\r]\n
+//  ... (other headers if any)
+//  [\r]\n (second line feed to delimit end of headers)
+//  data
+//  --BoundaryToken-- (end delimited by final "--")
+//
+// linebreaks can be either CRLF or LFLF. linebreaks preceeding
+// boundary tokens are considered part of the data. BoundaryToken
+// is any opaque string.
+//  
+//
+
+class nsMultiMixedConv : public nsIStreamConverter {
+public:
+    NS_DECL_ISUPPORTS
+    NS_DECL_NSISTREAMCONVERTER
+    NS_DECL_NSISTREAMLISTENER
+    NS_DECL_NSISTREAMOBSERVER
+
+    nsMultiMixedConv();
+    virtual ~nsMultiMixedConv();
+
+protected:
+    nsresult SendStart(nsIChannel *aChannel);
+    nsresult SendStop(nsresult aStatus, const PRUnichar *aStatusMsg);
+    nsresult SendData(char *aBuffer, PRUint32 aLen);
+    nsresult ParseHeaders(nsIChannel *aChannel, char *&aPtr,
+                          PRUint32 &aLen, PRBool *_retval);
+    PRInt8 PushOverLine(char *&aPtr, PRUint32 &aLen);
+    char *FindToken(char *aCursor, PRUint32 aLen);
+    nsresult BufferData(char *aData, PRUint32 aLen);
+
+    // member data
+    PRBool              mNewPart;        // Are we processing the beginning of a part?
+	PRBool				mProcessingHeaders;
+    nsCOMPtr<nsIStreamListener> mFinalListener; // this guy gets the converted data via his OnDataAvailable()
+
+	nsXPIDLCString		mToken;
+    PRUint32            mTokenLen;
+
+    nsCOMPtr<nsIChannel>mPartChannel;   // the channel for the given part we're processing.
+                                        // one channel per part.
+    nsCOMPtr<nsISupports> mContext;
+    nsCString           mContentType;
+    PRInt32             mContentLength;
+    
+    char                *mBuffer;
+    PRUint32            mBufLen;
+    PRBool              mFirstOnData;   // used to determine if we're in our first OnData callback.
+};
+
+#endif /* __nsmultimixedconv__h__ */

mozilla/netwerk/streamconv/converters/nsTXTToHTMLConv.cpp

@@ -0,0 +1,279 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+
+#include "nsTXTToHTMLConv.h"
+#include "nsNetUtil.h"
+#include "nsIStringStream.h"
+
+#define TOKEN_DELIMITERS "\t\r\n "
+
+// nsISupports methods
+NS_IMPL_THREADSAFE_ISUPPORTS4(nsTXTToHTMLConv,
+                              nsIStreamConverter,
+                              nsITXTToHTMLConv,
+                              nsIStreamObserver,
+                              nsIStreamListener);
+
+
+// nsIStreamConverter methods
+NS_IMETHODIMP
+nsTXTToHTMLConv::Convert(nsIInputStream *aFromStream,
+                         const PRUnichar *aFromType, const PRUnichar *aToType,
+                         nsISupports *aCtxt, nsIInputStream * *_retval) {
+    return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP
+nsTXTToHTMLConv::AsyncConvertData(const PRUnichar *aFromType,
+                                  const PRUnichar *aToType,
+                                  nsIStreamListener *aListener,
+                                  nsISupports *aCtxt) {
+    NS_ASSERTION(aListener, "null pointer");
+    mListener = aListener;
+    return NS_OK;
+}
+
+
+// nsIStreamObserver methods
+NS_IMETHODIMP
+nsTXTToHTMLConv::OnStartRequest(nsIRequest* request, nsISupports *aContext) {
+    mBuffer.AssignWithConversion("<html>\n<head><title>");
+    mBuffer.Append(mPageTitle);
+    mBuffer.AppendWithConversion("</title></head>\n<body>\n");
+    if (mPreFormatHTML) {     // Use <pre> tags
+      mBuffer.AppendWithConversion("<pre>\n");
+    }
+
+    // Push mBuffer to the listener now, so the initial HTML will not
+    // be parsed in OnDataAvailable().
+
+    nsresult rv = mListener->OnStartRequest(request, aContext);
+    if (NS_FAILED(rv)) return rv;
+
+    nsCOMPtr<nsIInputStream> inputData;
+    nsCOMPtr<nsISupports>    inputDataSup;
+    rv = NS_NewStringInputStream(getter_AddRefs(inputDataSup), mBuffer);
+    if (NS_FAILED(rv)) return rv;
+
+    inputData = do_QueryInterface(inputDataSup);
+    rv = mListener->OnDataAvailable(request, aContext,
+                                    inputData, 0, mBuffer.Length());
+    if (NS_FAILED(rv)) return rv;
+    mBuffer.AssignWithConversion("");
+    return rv;
+}
+
+NS_IMETHODIMP
+nsTXTToHTMLConv::OnStopRequest(nsIRequest* request, nsISupports *aContext,
+                               nsresult aStatus, const PRUnichar* aStatusArg) {
+    nsresult rv = NS_OK;
+    if (mToken) {
+        // we still have an outstanding token
+        PRInt32 back = mBuffer.FindCharInSet(TOKEN_DELIMITERS);
+        if (back == -1) back = mBuffer.Length();
+        (void)CatHTML(0, mBuffer.Length());
+    }
+    if (mPreFormatHTML) {
+      mBuffer.AppendWithConversion("</pre>\n");
+    }
+    mBuffer.AppendWithConversion("\n</body></html>");    
+    
+    nsCOMPtr<nsIInputStream> inputData;
+    nsCOMPtr<nsISupports>    inputDataSup;
+
+    rv = NS_NewStringInputStream(getter_AddRefs(inputDataSup), mBuffer);
+    if (NS_FAILED(rv)) return rv;
+
+    inputData = do_QueryInterface(inputDataSup);
+
+    rv = mListener->OnDataAvailable(request, aContext,
+                                    inputData, 0, mBuffer.Length());
+    if (NS_FAILED(rv)) return rv;
+
+    return mListener->OnStopRequest(request, aContext, aStatus, aStatusArg);
+}
+
+// nsITXTToHTMLConv methods
+NS_IMETHODIMP
+nsTXTToHTMLConv::SetTitle(const PRUnichar *aTitle) {
+  mPageTitle.Assign(aTitle);
+  return NS_OK;
+}
+
+NS_IMETHODIMP
+nsTXTToHTMLConv::PreFormatHTML(PRBool value) {
+  mPreFormatHTML = value;
+  return NS_OK;
+}
+
+// nsIStreamListener method
+NS_IMETHODIMP
+nsTXTToHTMLConv::OnDataAvailable(nsIRequest* request, nsISupports *aContext,
+                                 nsIInputStream *aInStream,
+                                 PRUint32 aOffset, PRUint32 aCount) {
+    nsresult rv = NS_OK;
+    nsString pushBuffer;
+    PRUint32 amtRead = 0;
+    char *buffer = (char*)nsMemory::Alloc(aCount+1);
+    if (!buffer) return NS_ERROR_OUT_OF_MEMORY;
+    
+    do {
+        PRUint32 read = 0;
+        rv = aInStream->Read(buffer, aCount-amtRead, &read);
+        if (NS_FAILED(rv)) return rv;
+
+        buffer[read] = '\0';
+        mBuffer.AppendWithConversion(buffer);
+        amtRead += read;
+
+        PRInt32 front = -1, back = -1, tokenLoc = -1, cursor = 0; 
+
+        while ( (tokenLoc = FindToken(cursor, &mToken)) > -1) {
+            front = mBuffer.RFindCharInSet(TOKEN_DELIMITERS, tokenLoc);
+            front++;
+    
+            back = mBuffer.FindCharInSet(TOKEN_DELIMITERS, tokenLoc);
+            if (back == -1) {
+                // didn't find an ending, buffer up.
+                mBuffer.Left(pushBuffer, front);
+                cursor = front;
+                break;
+            } else {
+                // found the end of the token.
+                cursor = CatHTML(front, back);
+            }
+        }
+
+        PRInt32 end = mBuffer.RFind(TOKEN_DELIMITERS, 
+                                    PR_FALSE, mBuffer.Length());
+        mBuffer.Left(pushBuffer, PR_MAX(cursor, end));
+        mBuffer.Cut(0, PR_MAX(cursor, end));
+        cursor = 0;
+
+        if (!pushBuffer.IsEmpty()) {
+            nsCOMPtr<nsIInputStream> inputData;
+            nsCOMPtr<nsISupports>    inputDataSup;
+            rv = NS_NewStringInputStream(getter_AddRefs(inputDataSup), pushBuffer);
+            if (NS_FAILED(rv)) {
+                nsMemory::Free(buffer);
+                return rv;
+            }
+
+            inputData = do_QueryInterface(inputDataSup);
+
+            rv = mListener->OnDataAvailable(request, aContext,
+                                            inputData, 0, pushBuffer.Length());
+            if (NS_FAILED(rv)) {
+                nsMemory::Free(buffer);
+                return rv;
+            }
+        }
+    } while (amtRead < aCount);
+
+    nsMemory::Free(buffer);
+    return rv; 
+} 
+// nsTXTToHTMLConv methods
+nsTXTToHTMLConv::nsTXTToHTMLConv() {
+    NS_INIT_REFCNT();
+    mToken = nsnull;
+    mPreFormatHTML = PR_FALSE;
+}
+
+static PRBool CleanupTokens(void *aElement, void *aData) {
+    if (aElement) delete (convToken*)aElement;
+    return PR_TRUE;
+}
+
+nsTXTToHTMLConv::~nsTXTToHTMLConv() {
+    mTokens.EnumerateForwards((nsVoidArrayEnumFunc)CleanupTokens, nsnull);
+}
+
+nsresult
+nsTXTToHTMLConv::Init() {
+    nsresult rv = NS_OK;
+
+    // build up the list of tokens to handle
+    convToken *token = new convToken;
+    if (!token) return NS_ERROR_OUT_OF_MEMORY;
+    token->prepend = PR_TRUE;
+    token->token.AssignWithConversion("http://"); // XXX need to iterate through all protos
+    mTokens.AppendElement(token);
+
+    token = new convToken;
+    if (!token) return NS_ERROR_OUT_OF_MEMORY;
+    token->prepend = PR_TRUE;
+    token->token.AssignWithConversion('@');
+    token->modText.AssignWithConversion("mailto:");
+    mTokens.AppendElement(token);
+  
+    return rv;
+}
+
+PRInt32
+nsTXTToHTMLConv::FindToken(PRInt32 cursor, convToken* *_retval) {
+    PRInt32 loc = -1, firstToken = mBuffer.Length();
+    PRInt8 token = -1;
+    for (PRInt8 i=0; i < mTokens.Count(); i++) {
+        loc = mBuffer.Find(((convToken*)mTokens[i])->token, PR_FALSE, cursor);
+        if (loc != -1)
+            if (loc < firstToken) {
+                firstToken = loc;
+                token = i;
+            }
+    }
+    if (token != -1) {
+        *_retval = (convToken*)mTokens[token];   
+        return firstToken;
+    } else {
+        return -1;
+    }
+}
+
+PRInt32
+nsTXTToHTMLConv::CatHTML(PRInt32 front, PRInt32 back) {
+    PRInt32 cursor = 0;
+    if (!mToken->prepend) {
+        // replace the entire token (from delimiter to delimiter)
+        mBuffer.Cut(front, back);
+        mBuffer.Insert(mToken->modText, front);
+    } else {
+        nsString linkText;
+        // href is implied
+        PRInt32 modLen = mToken->modText.Length();
+        mBuffer.Mid(linkText, front, back-front);
+        mBuffer.InsertWithConversion("<a href=\"", front);
+        cursor += front+9;
+        if (modLen)
+            mBuffer.Insert(mToken->modText, cursor);
+        cursor += modLen-front+back;
+        mBuffer.InsertWithConversion("\">", cursor);
+        cursor += 2;
+        mBuffer.Insert(linkText, cursor);
+        cursor += linkText.Length();
+        mBuffer.InsertWithConversion("</a>", cursor);
+        cursor += 4;
+    }
+    mToken = nsnull; // indicates completeness
+    return cursor;
+}
+

mozilla/netwerk/streamconv/converters/nsTXTToHTMLConv.h

@@ -0,0 +1,98 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+
+#ifndef ____nstxttohtmlconv___h___
+#define ____nstxttohtmlconv___h___
+
+#include "nsITXTToHTMLConv.h"
+#include "nsCOMPtr.h"
+#include "nsVoidArray.h"
+#include "nsIFactory.h"
+#include "nsString.h"
+
+#define NS_NSTXTTOHTMLCONVERTER_CID                         \
+{ /* 9ef9fa14-1dd1-11b2-9d65-d72d6d1f025e */ \
+    0x9ef9fa14, \
+    0x1dd1, \
+    0x11b2, \
+    {0x9d, 0x65, 0xd7, 0x2d, 0x6d, 0x1f, 0x02, 0x5e} \
+}
+
+// Internal representation of a "token"
+typedef struct convToken {
+    nsString token;     // the actual string (i.e. "http://")
+    nsString modText;   // replacement text or href prepend text.
+    PRBool   prepend;   // flag indicating how the modText should be used.
+} convToken;
+    
+class nsTXTToHTMLConv : public nsITXTToHTMLConv {
+public:
+    NS_DECL_ISUPPORTS
+    NS_DECL_NSISTREAMCONVERTER
+    NS_DECL_NSITXTTOHTMLCONV
+    NS_DECL_NSISTREAMOBSERVER
+    NS_DECL_NSISTREAMLISTENER
+
+    nsTXTToHTMLConv();
+    virtual ~nsTXTToHTMLConv();
+    nsresult Init();
+
+    // For factory creation.
+    static NS_METHOD
+    Create(nsISupports *aOuter, REFNSIID aIID, void **aResult) {
+        nsresult rv;
+        if (aOuter)
+            return NS_ERROR_NO_AGGREGATION;
+
+        nsTXTToHTMLConv* _s = new nsTXTToHTMLConv();
+        if (_s == nsnull)
+            return NS_ERROR_OUT_OF_MEMORY;
+        NS_ADDREF(_s);
+        rv = _s->Init();
+        if (NS_FAILED(rv)) {
+            delete _s;
+            return rv;
+        }
+        rv = _s->QueryInterface(aIID, aResult);
+        NS_RELEASE(_s);
+        return rv;
+    }
+
+
+protected:
+    // return the token and it's location in the underlying buffer.
+    PRInt32 FindToken(PRInt32 cursor, convToken* *_retval);
+
+    // return the cursor location after munging HTML into the 
+    // underlying buffer.
+    PRInt32 CatHTML(PRInt32 front, PRInt32 back);
+
+    nsCOMPtr<nsIStreamListener>     mListener; // final listener (consumer)
+    nsString                        mBuffer;   // any carry over data
+    nsVoidArray                     mTokens;   // list of tokens to search for
+    convToken                       *mToken;   // current token (if any)
+    nsString                        mPageTitle; // Page title
+    PRBool                          mPreFormatHTML; // Whether to use <pre> tags
+};
+
+#endif // ____nstxttohtmlconv___h___
+

mozilla/netwerk/streamconv/converters/nsUnknownDecoder.cpp

@@ -0,0 +1,376 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+
+#include "nsUnknownDecoder.h"
+#include "nsIServiceManager.h"
+#include "nsIStreamConverterService.h"
+
+#include "nsIPipe.h"
+#include "nsIInputStream.h"
+#include "nsIOutputStream.h"
+#include "nsMimeTypes.h"
+#include "netCore.h"
+#include "nsXPIDLString.h"
+#include "nsIPref.h"
+
+#define MAX_BUFFER_SIZE 1024
+
+static NS_DEFINE_CID(kStreamConverterServiceCID, NS_STREAMCONVERTERSERVICE_CID);
+static NS_DEFINE_IID(kPrefServiceCID, NS_PREF_CID);
+
+
+nsUnknownDecoder::nsUnknownDecoder()
+{
+  NS_INIT_ISUPPORTS();
+
+  mBuffer = nsnull;
+  mBufferLen = 0;
+  mRequireHTMLsuffix = PR_FALSE;
+
+  nsresult rv;
+  nsCOMPtr<nsIPref> pPrefService = do_GetService(kPrefServiceCID, &rv);
+  if (NS_SUCCEEDED(rv)) {
+    rv = pPrefService->GetBoolPref("security.requireHTMLsuffix", &mRequireHTMLsuffix);
+  }
+
+
+}
+
+nsUnknownDecoder::~nsUnknownDecoder()
+{
+  if (mBuffer) {
+    delete [] mBuffer;
+    mBuffer = nsnull;
+  }
+}
+
+// ----
+//
+// nsISupports implementation...
+//
+// ----
+
+NS_IMPL_ADDREF(nsUnknownDecoder);
+NS_IMPL_RELEASE(nsUnknownDecoder);
+
+NS_INTERFACE_MAP_BEGIN(nsUnknownDecoder)
+   NS_INTERFACE_MAP_ENTRY(nsIStreamConverter)
+   NS_INTERFACE_MAP_ENTRY(nsIStreamListener)
+   NS_INTERFACE_MAP_ENTRY(nsIStreamObserver)
+   NS_INTERFACE_MAP_ENTRY(nsISupports)
+NS_INTERFACE_MAP_END
+
+
+// ----
+//
+// nsIStreamConverter methods...
+//
+// ----
+
+NS_IMETHODIMP
+nsUnknownDecoder::Convert(nsIInputStream *aFromStream,
+                          const PRUnichar *aFromType,
+                          const PRUnichar *aToType,
+                          nsISupports *aCtxt, 
+                          nsIInputStream **aResultStream) 
+{
+  return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP
+nsUnknownDecoder::AsyncConvertData(const PRUnichar *aFromType, 
+                                   const PRUnichar *aToType,
+                                   nsIStreamListener *aListener, 
+                                   nsISupports *aCtxt)
+{
+  NS_ASSERTION(aListener && aFromType && aToType, 
+               "null pointer passed into multi mixed converter");
+
+  // hook up our final listener. this guy gets the various On*() calls we want to throw
+  // at him.
+  //
+  mNextListener = aListener;
+  return (aListener) ? NS_OK : NS_ERROR_FAILURE;
+}
+
+// ----
+//
+// nsIStreamListener methods...
+//
+// ----
+
+NS_IMETHODIMP
+nsUnknownDecoder::OnDataAvailable(nsIRequest* request, 
+                                  nsISupports *aCtxt,
+                                  nsIInputStream *aStream, 
+                                  PRUint32 aSourceOffset, 
+                                  PRUint32 aCount)
+{
+  nsresult rv = NS_OK;
+
+  if (!mNextListener) return NS_ERROR_FAILURE;
+
+  if (mContentType.IsEmpty()) {
+    PRUint32 count, len;
+
+    // If the buffer has not been allocated by now, just fail...
+    if (!mBuffer) return NS_ERROR_OUT_OF_MEMORY;
+
+    //
+    // Determine how much of the stream should be read to fill up the
+    // sniffer buffer...
+    //
+    if (mBufferLen + aCount >= MAX_BUFFER_SIZE) {
+      count = MAX_BUFFER_SIZE-mBufferLen;
+    } else {
+      count = aCount;
+    }
+
+    // Read the data into the buffer...
+    rv = aStream->Read((mBuffer+mBufferLen), count, &len);
+    if (NS_FAILED(rv)) return rv;
+
+    mBufferLen += len;
+    aCount     -= len;
+
+    if (aCount) {
+      //
+      // Adjust the source offset...  The call to FireListenerNotifications(...)
+      // will make the first OnDataAvailable(...) call with an offset of 0.
+      // So, this offset needs to be adjusted to reflect that...
+      //
+      aSourceOffset += mBufferLen;
+
+      DetermineContentType(request);
+
+      NS_ASSERTION(!mContentType.IsEmpty(), 
+                   "Content type should be known by now.");
+      rv = FireListenerNotifications(request, aCtxt);
+    }
+  }
+
+  if (aCount) {
+    NS_ASSERTION(!mContentType.IsEmpty(), 
+                 "Content type should be known by now.");
+
+    rv = mNextListener->OnDataAvailable(request, aCtxt, aStream, 
+                                        aSourceOffset, aCount);
+  }
+
+  return rv;
+}
+
+// ----
+//
+// nsIStreamObserver methods...
+//
+// ----
+
+NS_IMETHODIMP
+nsUnknownDecoder::OnStartRequest(nsIRequest* request, nsISupports *aCtxt) 
+{
+  nsresult rv = NS_OK;
+
+  if (!mNextListener) return NS_ERROR_FAILURE;
+
+  // Allocate the sniffer buffer...
+  if (NS_SUCCEEDED(rv) && !mBuffer) {
+    mBuffer = new char[MAX_BUFFER_SIZE];
+
+    if (!mBuffer) {
+      rv = NS_ERROR_OUT_OF_MEMORY;
+    }
+  }
+
+  // Do not pass the OnStartRequest on to the next listener (yet)...
+  return rv;
+}
+
+NS_IMETHODIMP
+nsUnknownDecoder::OnStopRequest(nsIRequest* request, nsISupports *aCtxt,
+                                nsresult aStatus, const PRUnichar* aStatusArg)
+{
+  nsresult rv = NS_OK;
+
+  if (!mNextListener) return NS_ERROR_FAILURE;
+
+  //
+  // The total amount of data is less than the size of the sniffer buffer.
+  // Analyze the buffer now...
+  //
+  if (mContentType.IsEmpty()) {
+    DetermineContentType(request);
+
+    NS_ASSERTION(!mContentType.IsEmpty(), 
+                 "Content type should be known by now.");
+    rv = FireListenerNotifications(request, aCtxt);
+
+    if (NS_FAILED(rv)) {
+      aStatus = rv;
+    }
+  }
+
+  rv = mNextListener->OnStopRequest(request, aCtxt, aStatus, aStatusArg);
+  mNextListener = 0;
+
+  return rv;
+}
+
+
+void nsUnknownDecoder::DetermineContentType(nsIRequest* request)
+{
+  PRUint32 i;
+
+  NS_ASSERTION(mContentType.IsEmpty(), "Content type is already known.");
+  if (!mContentType.IsEmpty()) return;
+
+  CBufDescriptor bufDesc((const char*)mBuffer, PR_TRUE, mBufferLen, mBufferLen);
+  nsCAutoString str(bufDesc);
+
+  //
+  // If the buffer begins with "#!" or "%!" then it is a script of some
+  // sort...
+  //
+  // This false match happened all the time...  For example, CGI scripts
+  // written in sh or perl that emit HTML.
+  //
+  if (str.EqualsWithConversion("#!", PR_FALSE, 2) || 
+      str.EqualsWithConversion("%!", PR_FALSE, 2)) {
+    mContentType = TEXT_PLAIN;
+  }
+  //
+  // If the buffer begins with a mailbox delimiter then it is not HTML
+  //
+  else if (str.EqualsWithConversion("From ", PR_TRUE, 5) || 
+           str.EqualsWithConversion(">From ", PR_TRUE, 6)) {
+    mContentType = TEXT_PLAIN;
+  }
+  //
+  // If the buffer contains "common" HTML tags then lets call it HTML :-)
+  //
+  else {
+
+    /*
+     * To prevent a possible attack, we will not consider this to be html 
+     * content if it comes from the local file system
+     */
+
+    PRBool isLocalFile = PR_FALSE;
+    if (request) {
+      nsCOMPtr<nsIChannel> aChannel = do_QueryInterface(request);
+      if (!request) { NS_WARNING("QI failed"); return; }
+
+      nsCOMPtr<nsIURI> pURL;
+      if (NS_SUCCEEDED(aChannel->GetURI(getter_AddRefs(pURL))))
+          pURL->SchemeIs(nsIURI::FILE, &isLocalFile);
+    }
+
+    if (!mRequireHTMLsuffix || !isLocalFile) {
+      PRInt32 offset;
+
+      offset = str.Find("<HTML", PR_TRUE);
+      if (offset < 0) {
+        offset = str.Find("<TITLE", PR_TRUE);
+        if (offset < 0) {
+          offset = str.Find("<FRAMESET", PR_TRUE);
+          if (offset < 0) {
+            offset = str.Find("<SCRIPT", PR_TRUE);
+            if (offset < 0) {
+              offset = str.Find("<BODY", PR_TRUE);
+            }
+          }
+        }
+      }
+
+      if (offset >= 0) {
+        mContentType = TEXT_HTML;
+      }
+    }
+  }
+
+  //
+  // See if the buffer has any embedded nulls.  If not, then lets just
+  // call it text/plain...
+  //
+  if (mContentType.IsEmpty()) {
+    for (i=0; i<mBufferLen && mBuffer[i]; i++);
+    if (i == mBufferLen) {
+      mContentType = TEXT_PLAIN;
+    }
+  }
+
+  //
+  // If the buffer is not text, then just call it application/octet-stream
+  //
+  if (mContentType.IsEmpty()) {
+    mContentType = APPLICATION_OCTET_STREAM;
+  }
+}
+
+nsresult nsUnknownDecoder::FireListenerNotifications(nsIRequest* request,
+                                                     nsISupports *aCtxt)
+{
+  nsresult rv = NS_OK;
+
+  if (!mNextListener) return NS_ERROR_FAILURE;
+
+  if (!mBuffer) return NS_ERROR_OUT_OF_MEMORY;
+
+  nsCOMPtr<nsIChannel> channel = do_QueryInterface(request, &rv);
+  if (NS_FAILED(rv)) return rv;
+
+  // Set the new content type on the channel...
+  channel->SetContentType(mContentType);
+
+  // Fire the OnStartRequest(...)
+  rv = mNextListener->OnStartRequest(request, aCtxt);
+
+  // Fire the first OnDataAvailable for the data that was read from the
+  // stream into the sniffer buffer...
+  if (NS_SUCCEEDED(rv)) {
+    PRUint32 len = 0;
+    nsCOMPtr<nsIInputStream> in;
+    nsCOMPtr<nsIOutputStream> out;
+
+    // Create a pipe and fill it with the data from the sniffer buffer.
+    rv = NS_NewPipe(getter_AddRefs(in), getter_AddRefs(out),
+                    MAX_BUFFER_SIZE, MAX_BUFFER_SIZE);
+
+    if (NS_SUCCEEDED(rv)) {
+      rv = out->Write(mBuffer, mBufferLen, &len);
+      if (NS_SUCCEEDED(rv)) {
+        if (len == mBufferLen) {
+          rv = mNextListener->OnDataAvailable(request, aCtxt, in, 0, len);
+        } else {
+          NS_ASSERTION(0, "Unable to write all the data into the pipe.");
+          rv = NS_ERROR_FAILURE;
+        }
+      }
+    }
+  }
+
+  delete [] mBuffer;
+  mBuffer = nsnull;
+  mBufferLen = 0;
+
+  return rv;
+}

mozilla/netwerk/streamconv/converters/nsUnknownDecoder.h

@@ -0,0 +1,76 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+
+#ifndef nsUnknownDecoder_h__
+#define nsUnknownDecoder_h__
+
+#include "nsIStreamConverter.h"
+#include "nsIChannel.h"
+
+#include "nsCOMPtr.h"
+#include "nsString.h"
+
+#define NS_UNKNOWNDECODER_CID                        \
+{ /* 7d7008a0-c49a-11d3-9b22-0080c7cb1080 */         \
+    0x7d7008a0,                                      \
+    0xc49a,                                          \
+    0x11d3,                                          \
+    {0x9b, 0x22, 0x00, 0x80, 0xc7, 0xcb, 0x10, 0x80}       \
+}
+
+
+class nsUnknownDecoder : public nsIStreamConverter
+{
+public:
+  // nsISupports methods
+  NS_DECL_ISUPPORTS
+
+  // nsIStreamConverter methods
+  NS_DECL_NSISTREAMCONVERTER
+
+  // nsIStreamListener methods
+  NS_DECL_NSISTREAMLISTENER
+
+  // nsIStreamObserver methods
+  NS_DECL_NSISTREAMOBSERVER
+
+  nsUnknownDecoder();
+
+protected:
+  virtual ~nsUnknownDecoder();
+
+  void DetermineContentType(nsIRequest* request);
+  nsresult FireListenerNotifications(nsIRequest* request, nsISupports *aCtxt);
+
+protected:
+  nsCOMPtr<nsIStreamListener> mNextListener;
+
+  char *mBuffer;
+  PRUint32 mBufferLen;
+  PRBool mRequireHTMLsuffix;
+
+  nsCString mContentType;
+};
+
+
+#endif /* nsUnknownDecoder_h__ */
+

mozilla/netwerk/streamconv/makefile.win

@@ -0,0 +1,35 @@
+#!gmake
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+DEPTH = ..\..
+
+MODULE = streamconv
+
+DIRS=          \
+    public \
+    src    \
+    converters \
+!if !defined(DISABLE_TESTS)
+    test \
+!endif
+    $(NULL)
+
+include <$(DEPTH)\config\rules.mak>

mozilla/netwerk/streamconv/public/Makefile.in

@@ -0,0 +1,40 @@
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#
+
+DEPTH		= ../../..
+topsrcdir	= @top_srcdir@
+srcdir		= @srcdir@
+VPATH		= @srcdir@
+
+include $(DEPTH)/config/autoconf.mk
+
+MODULE		= necko
+XPIDL_MODULE	= necko_strconv
+
+XPIDLSRCS	= \
+		nsIStreamConverter.idl \
+		nsIStreamConverterService.idl \
+		mozITXTToHTMLConv.idl \
+		nsITXTToHTMLConv.idl \
+		$(NULL)
+
+include $(topsrcdir)/config/rules.mk
+

mozilla/netwerk/streamconv/public/makefile.win

@@ -0,0 +1,40 @@
+#!gmake
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+MODULE = necko
+
+XPIDL_MODULE = necko_strconv
+
+DEPTH = ..\..\..
+
+XPIDLSRCS =                        \
+        .\nsIStreamConverter.idl   \
+        .\nsIStreamConverterService.idl \
+        .\mozITXTToHTMLConv.idl \
+        .\nsITXTToHTMLConv.idl \
+        $(NULL)
+
+include <$(DEPTH)/config/rules.mak>
+
+$(DEPTH)\netwerk\dist\include: 
+        -mkdir $(DEPTH)\netwerk\dist
+        -mkdir $(DEPTH)\netwerk\dist\include
+

mozilla/netwerk/streamconv/public/mozITXTToHTMLConv.idl

@@ -0,0 +1,104 @@
+/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ * 
+ * The "License" shall be the Mozilla Public License Version 1.1, except
+ * Sections 6.2 and 11, but with the addition of the below defined Section 14.
+ * You may obtain a copy of the Mozilla Public License Version 1.1 at
+ * <http://www.mozilla.org/MPL/>. The contents of this file are subject to the
+ * License; you may not use this file except in compliance with the License.
+ * 
+ * Section 14: MISCELLANEOUS.
+ * This License represents the complete agreement concerning subject matter
+ * hereof. If any provision of this License is held to be unenforceable, such
+ * provision shall be reformed only to the extent necessary to make it
+ * enforceable. This License shall be governed by German law provisions. Any
+ * litigation relating to this License shall be subject to German jurisdiction.
+ * 
+ * Once Covered Code has been published under a particular version of the
+ * License, You may always continue to use it under the terms of that version.
+ + The Initial Developer and no one else has the right to modify the terms
+ * applicable to Covered Code created under this License.
+ * (End of Section 14)
+ * 
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
+ * License for the specific language governing rights and limitations
+ * under the License.
+ * 
+ * The Original Code is the Text to HTML converter code.
+ * 
+ * The Initial Developer of the Original Code is Ben Bucksch
+ * <http://www.bucksch.org>. Portions created by Ben Bucksch are Copyright
+ * (C) 1999, 2000 Ben Bucksch. All Rights Reserved.
+ * 
+ * Contributor(s):
+ */
+
+/**
+  Description: Currently only functions to enhance plain text with HTML tags.
+  <p>
+  Wrapper class for various parsing routines, that convert plain text to HTML.
+  They try to recognize cites, URLs, plain text formattting like *bold* etc.
+  See <http://www.bucksch.org/1/projects/mozilla/16507/> for a description.
+ */
+
+#include "nsIStreamConverter.idl"
+#include "nsrootidl.idl"
+
+%{C++
+// {77c0e42a-1dd2-11b2-8ebf-edc6606f2f4b}
+#define MOZITXTTOHTMLCONV_CID \
+    { 0x77c0e42a, 0x1dd2, 0x11b2, \
+    { 0x8e, 0xbf, 0xed, 0xc6, 0x60, 0x6f, 0x2f, 0x4b } }
+%}
+
+[scriptable, uuid(77c0e42a-1dd2-11b2-8ebf-edc6606f2f4b)]
+interface mozITXTToHTMLConv : nsIStreamConverter {
+
+  const unsigned long kURLs = 1 << 1;
+  const unsigned long kGlyphSubstitution = 1 << 2;  // Smilies, &reg; etc.
+  const unsigned long kStructPhrase = 1 << 3;       // E.g. *bold* -> <strong>
+
+/**
+  @param text: plain text to scan. May be a line, paragraph (recommended)
+               or just a substring.<p>
+               Must be non-escaped, pure unicode.<p>
+               <em>Note:</em> ScanTXT(a, o) + ScanTXT(b, o) may be !=
+               Scan(a + b, o)
+  @param whattodo: Bitfield describing the modes of operation
+  @result      "<", ">" and "&" are escaped and HTML tags are inserted where
+               appropriate.
+ */
+  wstring   scanTXT([const] in wstring text, in unsigned long whattodo);
+
+/**
+  Adds additional formatting to user edited text, that the user was too lazy
+  or "unknowledged" (DELETEME: is that a word?) to make.
+  <p>
+  <em>Note:</em> Don't use kGlyphSubstitution with this function. This option
+  generates tags, that are unuseable for UAs other than Mozilla. This would
+  be a data loss bug.
+
+  @param text: HTML source to scan. May be a line, paragraph (recommended)
+               or just a substring.<p>
+               Must be correct HTML. "<", ">" and "&" must be escaped,
+               other chars must be pure unicode.<p>
+               <em>Note:</em> ScanTXT(a, o) + ScanTXT(b, o) may be !=
+               Scan(a + b, o)
+  @param whattodo: Bitfield describing the modes of operation
+  @result      Additional HTML tags are inserted where appropriate.
+ */
+  wstring   scanHTML([const] in wstring text, in unsigned long whattodo);
+
+/**
+  @param line: line in original msg, possibly starting starting with
+               txt quote tags like ">"
+  @param logLineStart: pos in line, where the real content (logical line)
+               begins, i.e. pos after all txt quote tags.
+               E.g. position of "t" in "> > text".
+               Initial value must be 0, unless line is not real line.
+  @return      Cite Level, i.e. number of txt quote tags found, i.e. number of
+               nested quotes.
+ */
+  unsigned long   citeLevelTXT([const] in wstring line,
+                               out unsigned long logLineStart);
+};

mozilla/netwerk/streamconv/public/nsIStreamConverter.idl

@@ -0,0 +1,118 @@
+/* -*- Mode: IDL; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): Jud Valeski
+ */
+
+#include "nsIStreamListener.idl"
+#include "nsIInputStream.idl"
+#include "nsIURI.idl"
+
+/**
+ * nsIStreamConverter provides an interface to implement when you have code
+ * that converts data from one type to another.
+ *
+ * Suppose you had code that converted plain text into HTML. You could implement
+ * this interface to allow everyone else to use your conversion logic using a 
+ * standard api.
+ * <p>
+ * <b>STREAM CONVERTER USERS</b>
+ *
+ * There are currently two ways to use a stream converter:
+ * <ol>
+ * <li> <b>SYNCHRONOUS</b> Stream to Stream
+ *    You can supply the service with a stream of type X
+ *    and it will convert it to your desired output type and return
+ *    a converted (blocking) stream to you.</li>
+ *
+ * <li> <b>ASYNCHRONOUS</b> nsIStreamListener to nsIStreamListener
+ *    You can supply data directly to the converter by calling it's
+ *    nsIStreamListener::OnDataAvailable() method. It will then
+ *    convert that data from type X to your desired output type and
+ *    return converted data to you via the nsIStreamListener you passed
+ *    in by calling its OnDataAvailable() method.</li>
+ * </ol>
+ * <p>
+ *
+ * <b>STREAM CONVERTER SUPPLIERS</b>
+ *
+ * Registering a stream converter:
+ * Stream converter registration is a two step process. First of all the stream
+ * converter implementation must register itself with the component manager using
+ * a contractid in the format below. Second, the stream converter must add the contractid
+ * to the registry.
+ *
+ * Stream converter contractid format (the stream converter root key is defined in this
+ * file):
+ *
+ * <pre>Software/Netscape/streamconv/?from=FROM_MIME_TYPE&to=TO_MIME_TYPE</pre>
+ *
+ * @author Jud Valeski
+ * @see nsIStreamConverterService
+ */
+
+[scriptable, uuid(46484B30-3BD2-11d3-A16C-0050041CAF44)]
+interface nsIStreamConverter : nsIStreamListener {
+
+    /**
+     * <b>SYNCRONOUS VERSION</b>
+     * Converts a stream of one type, to a stream of another type.
+     *
+     * Use this method when you have a stream you want to convert.
+     *
+     * @param aFromStream   The stream representing the original/raw data.
+     * @param aFromType     The MIME type of aFromStream.
+     * @param aToType       The MIME type of the returned stream.
+     * @param aCtxt         Either an opaque context, or a converter specific context
+     *                      (implementation specific).
+     * @return              The converted stream. NOTE: The returned stream may not
+     *                      already be converted. An efficient stream converter
+     *                      implementation will converter data on demand rather than
+     *                      buffering the converted data until it is used.
+     */
+	
+    nsIInputStream Convert(in nsIInputStream aFromStream,
+						   in wstring aFromType,
+						   in wstring aToType,
+                           in nsISupports aCtxt);
+
+    /**
+     * <b>ASYNCRONOUS VERSION</b>
+     * Converts data arriving via the converter's nsIStreamListener::OnDataAvailable() 
+     * method from one type to another, pushing the converted data out to the caller 
+     * via aListener::OnDataAvailable().
+     *
+     * Use this method when you want to proxy (and convert) nsIStreamListener callbacks
+     * asynchronously.
+     *
+     * @param aFromType     The MIME type of the original/raw data.
+     * @param aToType       The MIME type of the converted data.
+     * @param aListener     The listener who receives the converted data.
+     * @param aCtxt         Either an opaque context, or a converter specific context
+     *                      (implementation specific).
+     */
+	void AsyncConvertData(in wstring aFromType,
+				 in wstring aToType,
+				 in nsIStreamListener aListener,
+                 in nsISupports aCtxt);
+};
+
+%{C++
+#define NS_ISTREAMCONVERTER_KEY         "@mozilla.org/streamconv;1"
+%}

mozilla/netwerk/streamconv/public/nsIStreamConverterService.idl

@@ -0,0 +1,94 @@
+/* -*- Mode: IDL; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): Jud Valeski
+ */
+
+#include "nsIInputStream.idl"
+#include "nsIStreamListener.idl"
+
+/**
+ * The nsIStreamConverterService is a higher level stream converter factory
+ * responsible for locating and creating stream converters (nsIStreamConverter).
+ *
+ * This service retrieves an interface that can convert data from a particular MIME
+ * type, to a particular MIME type. It is responsible for any intermediary
+ * conversion required in order to get from X to Z, assuming direct conversion is not
+ * possible.
+ *
+ * @author Jud Valeski
+ * @see nsIStreamConverter
+ */
+
+%{C++
+#define NS_STREAMCONVERTERSERVICE_CID                \
+{ /* 892FFEB0-3F80-11d3-A16C-0050041CAF44 */         \
+    0x892ffeb0,                                      \
+    0x3f80,                                          \
+    0x11d3,                                          \
+    {0xa1, 0x6c, 0x00, 0x50, 0x04, 0x1c, 0xaf, 0x44} \
+}
+#define NS_ISTREAMCONVERTER_KEY         "@mozilla.org/streamconv;1"
+%}
+
+[scriptable, uuid(00362090-3B97-11d3-A16C-0050041CAF44)]
+interface nsIStreamConverterService : nsISupports {
+
+    /**
+     * <b>SYNCRONOUS VERSION</b>
+     * Converts a stream of one type, to a stream of another type.
+     *
+     * Use this method when you have a stream you want to convert.
+     *
+     * @param aFromStream   The stream representing the original/raw data.
+     * @param aFromType     The MIME type of aFromStream.
+     * @param aToType       The MIME type of the returned stream.
+     * @param aContext      Either an opaque context, or a converter specific context
+     *                      (implementation specific).
+     * @return              The converted stream. NOTE: The returned stream may not
+     *                      already be converted. An efficient stream converter
+     *                      implementation will converter data on demand rather than
+     *                      buffering the converted data until it is used.
+     */
+    nsIInputStream Convert(in nsIInputStream aFromStream,
+						   in wstring aFromType,
+						   in wstring aToType,
+                           in nsISupports aContext);
+
+    /**
+     * <b>ASYNCRONOUS VERSION</b>
+     * Retrieves a nsIStreamListener that receives the original/raw data via its
+     * nsIStreamListener::OnDataAvailable() callback, then converts and pushes 
+     * the data to aListener.
+     *
+     * Use this method when you want to proxy (and convert) nsIStreamListener callbacks
+     * asynchronously.
+     *
+     * @param aFromType     The MIME type of the original/raw data.
+     * @param aToType       The MIME type of the converted data.
+     * @param aListener     The listener who receives the converted data.
+     * @param aCtxt         Either an opaque context, or a converter specific context
+     *                      (implementation specific).
+     * @return              A nsIStreamListener that receives data via its OnDataAvailable() method.
+     */
+    nsIStreamListener AsyncConvertData(in wstring aFromType, 
+                                       in wstring aToType, 
+                                       in nsIStreamListener aListener,
+                                       in nsISupports aContext);
+};

mozilla/netwerk/streamconv/public/nsITXTToHTMLConv.idl

@@ -0,0 +1,42 @@
+/* -*- Mode: IDL; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): Brian Ryner
+ */
+
+#include "nsIStreamConverter.idl"
+#include "nsrootidl.idl"
+
+[scriptable, uuid(933355f6-1dd2-11b2-a9b0-d335b9e35983)]
+interface nsITXTToHTMLConv : nsIStreamConverter {
+
+/**
+  @param text: Title to set for the HTML document.  Only applicable if PreFormatHTML(true)
+               is called.
+  @result      The given title will be used to form an HTML document from the plain text document.
+ */
+  void      SetTitle([const] in wstring text);
+
+/**
+  @param value: true to use an HTML header and footer on the document, false to omit it.
+  @result       The document will use a header and footer if vale = true.
+ */
+  void      PreFormatHTML(in boolean value);
+
+};

mozilla/netwerk/streamconv/src/Makefile.in

@@ -0,0 +1,43 @@
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#
+
+DEPTH		= ../../..
+topsrcdir	= @top_srcdir@
+srcdir		= @srcdir@
+VPATH		= @srcdir@
+
+include $(DEPTH)/config/autoconf.mk
+
+MODULE		= necko
+LIBRARY_NAME	= nkconv_s
+REQUIRES	= xpcom string
+
+CPPSRCS		= \
+		nsStreamConverterService.cpp \
+		$(NULL)
+
+# we don't want the shared lib, but we want to force the creation of a
+# static lib.
+override NO_SHARED_LIB=1
+override NO_STATIC_LIB=
+
+include $(topsrcdir)/config/rules.mk
+

mozilla/netwerk/streamconv/src/makefile.win

@@ -0,0 +1,40 @@
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+DEPTH = ..\..\..
+include <$(DEPTH)/config/config.mak>
+
+MODULE = necko
+
+LIBRARY_NAME=nkconv_s
+
+LCFLAGS = -DWIN32_LEAN_AND_MEAN -D_IMPL_NS_NET
+
+CPP_OBJS =                                       \
+        .\$(OBJDIR)\nsStreamConverterService.obj \
+        $(NULL)
+
+include <$(DEPTH)\config\rules.mak>
+
+install:: $(LIBRARY)
+    $(MAKE_INSTALL) $(LIBRARY) $(DIST)\lib
+
+clobber::
+        rm -f $(DIST)\lib\$(LIBRARY_NAME).lib
+

mozilla/netwerk/streamconv/src/nsStreamConvServiceFactory.cpp

@@ -0,0 +1,92 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+
+#include "nsCOMPtr.h"
+#include "nsIModule.h"
+#include "nsIGenericFactory.h"
+#include "nsIStreamConverterService.h"
+#include "nsStreamConverterService.h"
+
+static NS_DEFINE_CID(kStreamConvServiceCID,      NS_STREAMCONVERTERSERVICE_CID);
+
+nsresult NS_NewStreamConv(nsStreamConverterService** aStreamConv);
+
+// Module implementation
+class nsStreamConvModule : public nsIModule
+{
+public:
+    nsStreamConvModule();
+    virtual ~nsStreamConvModule();
+
+    NS_DECL_ISUPPORTS
+
+    NS_DECL_NSIMODULE
+
+protected:
+    nsresult Initialize();
+
+    void Shutdown();
+
+    PRBool mInitialized;
+    nsCOMPtr<nsIGenericFactory> mStreamConvFactory;
+};
+
+//----------------------------------------------------------------------
+
+// Functions used to create new instances of a given object by the
+// generic factory.
+
+static NS_IMETHODIMP                 
+CreateNewStreamConv(nsISupports* aOuter, REFNSIID aIID, void **aResult) 
+{
+    if (!aResult) {                                                  
+        return NS_ERROR_INVALID_POINTER;                             
+    }
+    if (aOuter) {                                                    
+        *aResult = nsnull;                                           
+        return NS_ERROR_NO_AGGREGATION;                              
+    }   
+    nsStreamConverterService* inst = nsnull;
+    nsresult rv = NS_NewStreamConv(&inst);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+        return rv;                                                   
+    } 
+    rv = inst->QueryInterface(aIID, aResult);
+    if (NS_FAILED(rv)) {                                             
+        *aResult = nsnull;                                           
+    }                                                                
+    NS_RELEASE(inst);             /* get rid of extra refcnt */      
+    return rv;              
+}
+
+
+static nsModuleComponentInfo components[] = 
+{
+    { "Stream Converter Service", 
+      NS_STREAMCONVERTERSERVICE_CID,
+      "@mozilla.org/streamConverters;1", 
+      CreateNewStreamConv
+    },
+};
+
+NS_IMPL_NSGETMODULE("nsStreamConvModule", components);

mozilla/netwerk/streamconv/src/nsStreamConverterService.cpp

@@ -0,0 +1,655 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ *
+ *
+ * This Original Code has been modified by IBM Corporation.
+ * Modifications made by IBM described herein are
+ * Copyright (c) International Business Machines
+ * Corporation, 2000
+ *
+ * Modifications to Mozilla code or documentation
+ * identified per MPL Section 3.3
+ *
+ * Date         Modified by     Description of modification
+ * 03/27/2000   IBM Corp.       Added PR_CALLBACK for Optlink
+ *                               use in OS2
+ */
+
+#include "nsStreamConverterService.h"
+#include "nsIServiceManager.h"
+#include "nsIComponentManager.h"
+#include "nsString2.h"
+#include "nsIAtom.h"
+#include "nsDeque.h"
+#include "nsIInputStream.h"
+#include "nsIOutputStream.h"
+#include "nsIStreamConverter.h"
+#include "nsICategoryManager.h"
+#include "nsISupportsPrimitives.h"
+#include "nsXPIDLString.h"
+#include "nsCOMPtr.h"
+
+////////////////////////////////////////////////////////////
+// nsISupports methods
+NS_IMPL_THREADSAFE_ISUPPORTS1(nsStreamConverterService, nsIStreamConverterService);
+
+
+////////////////////////////////////////////////////////////
+// nsIStreamConverterService methods
+
+////////////////////////////////////////////////////////////
+// nsStreamConverterService methods
+nsStreamConverterService::nsStreamConverterService() {
+    NS_INIT_ISUPPORTS();
+    mAdjacencyList = nsnull;
+}
+
+// Delete all the entries in the adjacency list
+static PRBool PR_CALLBACK DeleteAdjacencyEntry(nsHashKey *aKey, void *aData, void* closure) {
+    SCTableData *entry = (SCTableData*)aData;
+    NS_ASSERTION(entry->key && entry->data, "malformed adjacency list entry");
+    delete entry->key;
+
+    // clear out the edges
+    nsVoidArray *edges = (nsVoidArray*)entry->data;
+    nsIAtom *vertex;
+    while ( (vertex = (nsIAtom*)edges->ElementAt(0)) ) {
+        NS_RELEASE(vertex);
+        edges->RemoveElementAt(0);
+    }
+    delete (nsVoidArray *)entry->data;
+    delete entry;
+    return PR_TRUE;   
+};
+
+nsStreamConverterService::~nsStreamConverterService() {
+    // Clean up the adjacency list table.
+    mAdjacencyList->Reset(DeleteAdjacencyEntry, nsnull);
+    delete mAdjacencyList;
+}
+
+nsresult
+nsStreamConverterService::Init() {
+    mAdjacencyList = new nsHashtable();
+    if (!mAdjacencyList) return NS_ERROR_OUT_OF_MEMORY;
+    return NS_OK;
+}
+
+// Builds the graph represented as an adjacency list (and built up in 
+// memory using an nsHashtable and nsVoidArray combination).
+//
+// :BuildGraph() consults the category manager for all stream converter 
+// CONTRACTIDS then fills the adjacency list with edges.
+// An edge in this case is comprised of a FROM and TO MIME type combination.
+// 
+// CONTRACTID format:
+// @mozilla.org/streamconv;1?from=text/html&to=text/plain
+// XXX curently we only handle a single from and to combo, we should repeat the 
+// XXX registration process for any series of from-to combos.
+// XXX can use nsTokenizer for this.
+//
+
+nsresult
+nsStreamConverterService::BuildGraph() {
+
+    nsresult rv;
+
+    nsCOMPtr<nsICategoryManager> catmgr(do_GetService(NS_CATEGORYMANAGER_CONTRACTID, &rv));
+    if (NS_FAILED(rv)) return rv;
+
+    nsCOMPtr<nsISimpleEnumerator> entries;
+    rv = catmgr->EnumerateCategory(NS_ISTREAMCONVERTER_KEY, getter_AddRefs(entries));
+    if (NS_FAILED(rv)) return rv;
+
+    // go through each entry to build the graph
+    nsCOMPtr<nsISupportsString> entry;
+    rv = entries->GetNext(getter_AddRefs(entry));
+    while (NS_SUCCEEDED(rv)) {
+
+        // get the entry string
+        nsXPIDLCString entryString;
+        rv = entry->GetData(getter_Copies(entryString));
+        if (NS_FAILED(rv)) return rv;
+        
+        // cobble the entry string w/ the converter key to produce a full contractID.
+        nsCString contractID(NS_ISTREAMCONVERTER_KEY);
+        contractID.Append((const char *)entryString);
+
+        // now we've got the CONTRACTID, let's parse it up.
+        rv = AddAdjacency(contractID.get());
+        if (NS_FAILED(rv)) return rv;
+
+        rv = entries->GetNext(getter_AddRefs(entry));
+    }
+
+    return NS_OK;
+}
+
+
+// XXX currently you can not add the same adjacency (i.e. you can't have multiple
+// XXX stream converters registering to handle the same from-to combination. It's
+// XXX not programatically prohibited, it's just that results are un-predictable
+// XXX right now.
+nsresult
+nsStreamConverterService::AddAdjacency(const char *aContractID) {
+    nsresult rv;
+    // first parse out the FROM and TO MIME-types.
+
+    nsCString fromStr, toStr;
+    rv = ParseFromTo(aContractID, fromStr, toStr);
+    if (NS_FAILED(rv)) return rv;
+
+    // Each MIME-type is a vertex in the graph, so first lets make sure
+    // each MIME-type is represented as a key in our hashtable.
+
+    nsCStringKey *fromKey = new nsCStringKey(fromStr.get(), -1, nsCStringKey::OWN);
+    if (!fromKey) return NS_ERROR_OUT_OF_MEMORY;
+
+    SCTableData *edges = (SCTableData*)mAdjacencyList->Get(fromKey);
+    if (!edges) {
+        // There is no fromStr vertex, create one.
+        SCTableData *data = new SCTableData;
+        if (!data) {
+            delete fromKey;
+            return NS_ERROR_OUT_OF_MEMORY;
+        }
+
+        data->key = fromKey;
+        data->data = new nsVoidArray();
+        if (!data->data) {
+            delete fromKey;
+            delete data;
+            return NS_ERROR_OUT_OF_MEMORY;
+        }
+        mAdjacencyList->Put(fromKey, data);
+    } else {
+        delete fromKey;
+    }
+
+    nsCStringKey *toKey = new nsCStringKey(toStr.get(), -1, nsCStringKey::OWN);
+    if (!toKey) return NS_ERROR_OUT_OF_MEMORY;
+
+    edges = (SCTableData*)mAdjacencyList->Get(toKey);
+    if (!edges) {
+        // There is no toStr vertex, create one.
+        SCTableData *data = new SCTableData;
+        if (!data) {
+            delete toKey;
+            return NS_ERROR_OUT_OF_MEMORY;
+        }
+
+        data->key = toKey;
+        data->data = new nsVoidArray();
+        if (!data->data) {
+            delete toKey;
+            delete data;
+            return NS_ERROR_OUT_OF_MEMORY;
+        }
+        mAdjacencyList->Put(toKey, data);
+    } else {
+        delete toKey;
+    }
+    
+    // Now we know the FROM and TO types are represented as keys in the hashtable.
+    // Let's "connect" the verticies, making an edge.
+
+    edges = (SCTableData*)mAdjacencyList->Get(fromKey);
+    NS_ASSERTION(edges, "something wrong in adjacency list construction");
+    const char *toCStr = toStr.get();
+    nsIAtom *vertex = NS_NewAtom(toCStr); 
+    if (!vertex) return NS_ERROR_OUT_OF_MEMORY;
+    nsVoidArray *adjacencyList = (nsVoidArray*)edges->data;
+    rv = adjacencyList->AppendElement(vertex) ? NS_OK : NS_ERROR_FAILURE;  // XXX this method incorrectly returns a bool
+    return rv;
+}
+
+nsresult
+nsStreamConverterService::ParseFromTo(const char *aContractID, nsCString &aFromRes, nsCString &aToRes) {
+
+    nsCString ContractIDStr(aContractID);
+
+    PRInt32 fromLoc = ContractIDStr.Find("from=") + 5;
+    PRInt32 toLoc   = ContractIDStr.Find("to=") + 3;
+    if (-1 == fromLoc || -1 == toLoc ) return NS_ERROR_FAILURE;
+
+    nsCString fromStr, toStr;
+
+    ContractIDStr.Mid(fromStr, fromLoc, toLoc - 4 - fromLoc);
+    ContractIDStr.Mid(toStr, toLoc, ContractIDStr.Length() - toLoc);
+
+    aFromRes.Assign(fromStr);
+    aToRes.Assign(toStr);
+
+    return NS_OK;
+}
+
+// nsHashtable enumerator functions.
+
+// Initializes the BFS state table.
+static PRBool PR_CALLBACK InitBFSTable(nsHashKey *aKey, void *aData, void* closure) {
+    nsHashtable *BFSTable = (nsHashtable*)closure;
+    if (!BFSTable) return PR_FALSE;
+
+    BFSState *state = new BFSState;
+    if (!state) return NS_ERROR_OUT_OF_MEMORY;
+
+    state->color = white;
+    state->distance = -1;
+    state->predecessor = nsnull;
+
+    SCTableData *data = new SCTableData;
+    if (!data) return NS_ERROR_OUT_OF_MEMORY;
+    data->key = (nsCStringKey*)aKey->Clone();
+
+    SCTableData *origData = (SCTableData*)aData;
+    NS_ASSERTION(origData, "no data in the table enumeration");
+    data->data = state;
+
+    BFSTable->Put(aKey, data);
+    return PR_TRUE;   
+};
+
+// cleans up the BFS state table
+static PRBool PR_CALLBACK DeleteBFSEntry(nsHashKey *aKey, void *aData, void *closure) {
+    SCTableData *data = (SCTableData*)aData;
+    delete data->key;
+    BFSState *state = (BFSState*)data->data;
+    if (state->predecessor) // there might not be a predecessor depending on the graph
+        delete state->predecessor;
+    delete state;
+    delete data;
+    return PR_TRUE;
+}
+
+// walks the graph using a breadth-first-search algorithm which generates a discovered
+// verticies tree. This tree is then walked up (from destination vertex, to origin vertex)
+// and each link in the chain is added to an nsStringArray. A direct lookup for the given
+// CONTRACTID should be made prior to calling this method in an attempt to find a direct
+// converter rather than walking the graph.
+nsresult
+nsStreamConverterService::FindConverter(const char *aContractID, nsCStringArray **aEdgeList) {
+    nsresult rv;
+    if (!aEdgeList) return NS_ERROR_NULL_POINTER;
+
+    // walk the graph in search of the appropriate converter.
+
+    PRInt32 vertexCount = mAdjacencyList->Count();
+    if (0 >= vertexCount) return NS_ERROR_FAILURE;
+
+    // Create a corresponding color table for each vertex in the graph.
+    nsHashtable lBFSTable;
+    mAdjacencyList->Enumerate(InitBFSTable, &lBFSTable);
+
+    NS_ASSERTION(lBFSTable.Count() == vertexCount, "strmconv BFS table init problem");
+
+    // This is our source vertex; our starting point.
+    nsCString fromC, toC;
+    rv = ParseFromTo(aContractID, fromC, toC);
+    if (NS_FAILED(rv)) return rv;
+
+    nsCStringKey source(fromC.get());
+
+    SCTableData *data = (SCTableData*)lBFSTable.Get(&source);
+    if (!data) return NS_ERROR_FAILURE;
+
+    BFSState *state = (BFSState*)data->data;
+
+    state->color = gray;
+    state->distance = 0;
+    nsDeque grayQ(0);
+
+    // Now generate the shortest path tree.
+    grayQ.Push(&source);
+    while (0 < grayQ.GetSize()) {
+        nsHashKey *currentHead = (nsHashKey*)grayQ.PeekFront();
+        SCTableData *data2 = (SCTableData*)mAdjacencyList->Get(currentHead);
+        if (!data2) return NS_ERROR_FAILURE;
+        nsVoidArray *edges = (nsVoidArray*)data2->data;
+        NS_ASSERTION(edges, "something went wrong with BFS strmconv algorithm");
+
+        // Get the state of the current head to calculate the distance of each
+        // reachable vertex in the loop.
+        data2 = (SCTableData*)lBFSTable.Get(currentHead);
+        BFSState *headVertexState = (BFSState*)data2->data;
+        NS_ASSERTION(headVertexState, "problem with the BFS strmconv algorithm");
+
+        PRInt32 edgeCount = edges->Count();
+        for (int i = 0; i < edgeCount; i++) {
+            
+            nsIAtom *curVertexAtom = (nsIAtom*)edges->ElementAt(i);
+            nsAutoString curVertexStr;
+            curVertexAtom->ToString(curVertexStr);
+            nsCStringKey *curVertex = new nsCStringKey(curVertexStr.GetBuffer(), -1, nsCStringKey::OWN);
+
+            SCTableData *data3 = (SCTableData*)lBFSTable.Get(curVertex);
+            BFSState *curVertexState = (BFSState*)data3->data;
+            NS_ASSERTION(curVertexState, "something went wrong with the BFS strmconv algorithm");
+            if (white == curVertexState->color) {
+                curVertexState->color = gray;
+                curVertexState->distance = headVertexState->distance + 1;
+                curVertexState->predecessor = currentHead->Clone();
+                grayQ.Push(curVertex);
+            } else {
+                delete curVertex; // if this vertex has already been discovered, we don't want
+                                  // to leak it. (non-discovered vertex's get cleaned up when
+                                  // they're popped).
+            }
+        }
+        headVertexState->color = black;
+        nsCStringKey *cur = (nsCStringKey*)grayQ.PopFront();
+        delete cur;
+        cur = nsnull;
+    }
+    // The shortest path (if any) has been generated and is represetned by the chain of 
+    // BFSState->predecessor keys. Start at the bottom and work our way up.
+
+    // first parse out the FROM and TO MIME-types being registered.
+
+    nsCString fromStr, toStr;
+    rv = ParseFromTo(aContractID, fromStr, toStr);
+    if (NS_FAILED(rv)) return rv;
+
+    // get the root CONTRACTID
+    nsCString ContractIDPrefix(NS_ISTREAMCONVERTER_KEY);
+    nsCStringArray *shortestPath = new nsCStringArray();
+    nsCStringKey toMIMEType(toStr);
+    data = (SCTableData*)lBFSTable.Get(&toMIMEType);
+
+    if (!data) {
+        // If this vertex isn't in the BFSTable, then no-one has registered for it,
+        // therefore we can't do the conversion.
+        *aEdgeList = nsnull;
+        return NS_ERROR_FAILURE;
+    }
+
+    while (data) {
+        BFSState *curState = (BFSState*)data->data;
+
+        nsCStringKey *key = (nsCStringKey*)data->key;
+        
+        if (fromStr.Equals(key->GetString())) {
+            // found it. We're done here.
+            *aEdgeList = shortestPath;
+            lBFSTable.Reset(DeleteBFSEntry, nsnull);
+            return NS_OK;
+        }
+
+        // reconstruct the CONTRACTID.
+        // Get the predecessor.
+        SCTableData *predecessorData = (SCTableData*)lBFSTable.Get(curState->predecessor);
+        if (!predecessorData) break; // no predecessor, chain doesn't exist.
+
+        // build out the CONTRACTID.
+        nsCString *newContractID = new nsCString(ContractIDPrefix);
+        newContractID->Append("?from=");
+
+        nsCStringKey *predecessoryKey = (nsCStringKey*)predecessorData->key;
+        newContractID->Append(key->GetString());
+
+        newContractID->Append("&to=");
+        newContractID->Append(key->GetString());
+    
+        // Add this CONTRACTID to the chain.
+        rv = shortestPath->AppendCString(*newContractID) ? NS_OK : NS_ERROR_FAILURE;  // XXX this method incorrectly returns a bool
+        NS_ASSERTION(NS_SUCCEEDED(rv), "AppendElement failed");
+
+        // move up the tree.
+        data = predecessorData;
+    }
+
+    lBFSTable.Reset(DeleteBFSEntry, nsnull);
+    *aEdgeList = nsnull;
+    return NS_ERROR_FAILURE; // couldn't find a stream converter or chain.
+
+}
+
+
+/////////////////////////////////////////////////////
+// nsIStreamConverter methods
+NS_IMETHODIMP
+nsStreamConverterService::Convert(nsIInputStream *aFromStream,
+                                  const PRUnichar *aFromType, 
+                                  const PRUnichar *aToType,
+                                  nsISupports *aContext,
+                                  nsIInputStream **_retval) {
+    if (!aFromStream || !aFromType || !aToType || !_retval) return NS_ERROR_NULL_POINTER;
+    nsresult rv;
+
+    // first determine whether we can even handle this covnversion
+    // build a CONTRACTID
+    nsCString contractID(NS_ISTREAMCONVERTER_KEY);
+    contractID.Append("?from=");
+    contractID.AppendWithConversion(aFromType);
+    contractID.Append("&to=");
+    contractID.AppendWithConversion(aToType);
+    const char *cContractID = contractID.get();
+
+    nsIComponentManager *comMgr;
+    rv = NS_GetGlobalComponentManager(&comMgr);
+    if (NS_FAILED(rv)) return rv;
+
+    nsCOMPtr<nsIStreamConverter> converter(do_CreateInstance(cContractID, &rv));
+    if (NS_FAILED(rv)) {
+        // couldn't go direct, let's try walking the graph of converters.
+        rv = BuildGraph();
+        if (NS_FAILED(rv)) return rv;
+
+        nsCStringArray *converterChain = nsnull;
+
+        rv = FindConverter(cContractID, &converterChain);
+        if (NS_FAILED(rv)) {
+            // can't make this conversion.
+            // XXX should have a more descriptive error code.
+            return NS_ERROR_FAILURE;
+        }
+
+        PRInt32 edgeCount = converterChain->Count();
+        NS_ASSERTION(edgeCount > 0, "findConverter should have failed");
+
+
+        // convert the stream using each edge of the graph as a step.
+        // this is our stream conversion traversal.
+        nsCOMPtr<nsIInputStream> dataToConvert = aFromStream;
+        nsCOMPtr<nsIInputStream> convertedData;
+
+        for (PRInt32 i = edgeCount-1; i >= 0; i--) {
+            nsCString *contractIDStr = converterChain->CStringAt(i);
+            if (!contractIDStr) {
+                delete converterChain;
+                return NS_ERROR_FAILURE;
+            }
+            const char *lContractID = contractIDStr->get();
+
+            converter = do_CreateInstance(lContractID, &rv);
+
+            if (NS_FAILED(rv)) {
+                delete converterChain;                
+                return rv;
+            }
+
+            nsCString fromStr, toStr;
+            rv = ParseFromTo(lContractID, fromStr, toStr);
+            if (NS_FAILED(rv)) {
+                delete converterChain;
+                return rv;
+            }
+
+            PRUnichar *fromUni = fromStr.ToNewUnicode();
+            if (!fromUni) {
+                delete converterChain;
+                return NS_ERROR_OUT_OF_MEMORY;
+            }
+            PRUnichar *toUni   = toStr.ToNewUnicode();
+            if (!toUni) {
+                delete fromUni;
+                delete converterChain;
+                return NS_ERROR_OUT_OF_MEMORY;
+            }
+            rv = converter->Convert(dataToConvert, fromUni, toUni, aContext, getter_AddRefs(convertedData));
+            nsMemory::Free(fromUni);
+            nsMemory::Free(toUni);
+            dataToConvert = convertedData;
+            if (NS_FAILED(rv)) {
+                delete converterChain;
+                return rv;
+            }
+        }
+
+        delete converterChain;
+        *_retval = convertedData;
+        NS_ADDREF(*_retval);
+
+    } else {
+        // we're going direct.
+        rv = converter->Convert(aFromStream, aFromType, aToType, aContext, _retval);
+    }
+    
+    return rv;
+}
+
+
+NS_IMETHODIMP
+nsStreamConverterService::AsyncConvertData(const PRUnichar *aFromType, 
+                                           const PRUnichar *aToType, 
+                                           nsIStreamListener *aListener,
+                                           nsISupports *aContext,
+                                           nsIStreamListener **_retval) {
+    if (!aFromType || !aToType || !aListener || !_retval) return NS_ERROR_NULL_POINTER;
+
+    nsresult rv;
+
+    // first determine whether we can even handle this covnversion
+    // build a CONTRACTID
+    nsCString contractID(NS_ISTREAMCONVERTER_KEY);
+    contractID.Append("?from=");
+    contractID.AppendWithConversion(aFromType);
+    contractID.Append("&to=");
+    contractID.AppendWithConversion(aToType);
+    const char *cContractID = contractID.get();
+
+    nsIComponentManager *comMgr;
+    rv = NS_GetGlobalComponentManager(&comMgr);
+    if (NS_FAILED(rv)) return rv;
+
+    nsCOMPtr<nsIStreamConverter> listener(do_CreateInstance(cContractID, &rv));
+    if (NS_FAILED(rv)) {
+        // couldn't go direct, let's try walking the graph of converters.
+        rv = BuildGraph();
+        if (NS_FAILED(rv)) return rv;
+
+        nsCStringArray *converterChain = nsnull;
+
+        rv = FindConverter(cContractID, &converterChain);
+        if (NS_FAILED(rv)) {
+            // can't make this conversion.
+            // XXX should have a more descriptive error code.
+            return NS_ERROR_FAILURE;
+        }
+
+        PRInt32 edgeCount = converterChain->Count();
+        NS_ASSERTION(edgeCount > 0, "findConverter should have failed");
+
+        // convert the stream using each edge of the graph as a step.
+        // this is our stream conversion traversal.
+
+        nsCOMPtr<nsIStreamListener> forwardListener = aListener;
+        nsCOMPtr<nsIStreamListener> fromListener;
+
+        for (int i = 0; i < edgeCount; i++) {
+            nsCString *contractIDStr = converterChain->CStringAt(i);
+            if (!contractIDStr) {
+                delete converterChain;
+                return NS_ERROR_FAILURE;
+            }
+            const char *lContractID = contractIDStr->get();
+
+            nsCOMPtr<nsIStreamConverter> converter(do_CreateInstance(lContractID, &rv));
+            NS_ASSERTION(NS_SUCCEEDED(rv), "graph construction problem, built a contractid that wasn't registered");
+
+            nsCString fromStr, toStr;
+            rv = ParseFromTo(lContractID, fromStr, toStr);
+            if (NS_FAILED(rv)) {
+                delete converterChain;
+                return rv;
+            }
+
+            PRUnichar *fromStrUni = fromStr.ToNewUnicode();
+            if (!fromStrUni) {
+                delete converterChain;
+                return NS_ERROR_OUT_OF_MEMORY;
+            }
+
+            PRUnichar *toStrUni   = toStr.ToNewUnicode();
+            if (!toStrUni) {
+                delete fromStrUni;
+                delete converterChain;
+                return NS_ERROR_OUT_OF_MEMORY;
+            }
+
+            rv = converter->AsyncConvertData(fromStrUni, toStrUni, forwardListener, aContext);
+            nsMemory::Free(fromStrUni);
+            nsMemory::Free(toStrUni);
+            if (NS_FAILED(rv)) {
+                delete converterChain;
+                return rv;
+            }
+
+            nsCOMPtr<nsIStreamListener> chainListener(do_QueryInterface(converter, &rv));
+            if (NS_FAILED(rv)) {
+                delete converterChain;
+                return rv;
+            }
+
+            // store the listener of the first converter in the chain.
+            if (!fromListener)
+                fromListener = chainListener;
+
+            forwardListener = chainListener;
+        }
+        delete converterChain;
+        // return the first listener in the chain.
+        *_retval = fromListener;
+        NS_ADDREF(*_retval);
+
+    } else {
+        // we're going direct.
+        *_retval = listener;
+        NS_ADDREF(*_retval);
+
+        rv = listener->AsyncConvertData(aFromType, aToType, aListener, aContext);
+    }
+    
+    return rv;
+
+}
+
+nsresult
+NS_NewStreamConv(nsStreamConverterService** aStreamConv)
+{
+    NS_PRECONDITION(aStreamConv != nsnull, "null ptr");
+    if (!aStreamConv) return NS_ERROR_NULL_POINTER;
+
+    *aStreamConv = new nsStreamConverterService();
+    if (!*aStreamConv) return NS_ERROR_OUT_OF_MEMORY;
+
+    NS_ADDREF(*aStreamConv);
+    return (*aStreamConv)->Init();
+}

mozilla/netwerk/streamconv/src/nsStreamConverterService.h

@@ -0,0 +1,79 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/*
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+
+#ifndef __nsstreamconverterservice__h___
+#define __nsstreamconverterservice__h___
+
+#include "nsIStreamConverterService.h"
+#include "nsIStreamListener.h"
+#include "nsHashtable.h"
+#include "nsVoidArray.h"
+
+class nsStreamConverterService : public nsIStreamConverterService {
+public:    
+    /////////////////////////////////////////////////////
+    // nsISupports methods
+    NS_DECL_ISUPPORTS
+
+
+    /////////////////////////////////////////////////////
+    // nsIStreamConverterService methods
+    NS_DECL_NSISTREAMCONVERTERSERVICE
+
+    /////////////////////////////////////////////////////
+    // nsStreamConverterService methods
+    nsStreamConverterService();
+    virtual ~nsStreamConverterService();
+
+    // Initialization routine. Must be called after this object is constructed.
+    nsresult Init();
+
+private:
+    // Responsible for finding a converter for the given MIME-type.
+    nsresult FindConverter(const char *aContractID, nsCStringArray **aEdgeList);
+    nsresult BuildGraph(void);
+    nsresult AddAdjacency(const char *aContractID);
+    nsresult ParseFromTo(const char *aContractID, nsCString &aFromRes, nsCString &aToRes);
+
+    // member variables
+    nsHashtable              *mAdjacencyList;
+};
+
+///////////////////////////////////////////////////////////////////
+// Breadth-First-Search (BFS) algorithm state classes and types.
+
+// adjacency list and BFS hashtable data class.
+typedef struct _tableData {
+    nsCStringKey *key;
+    void      *data;
+} SCTableData;
+
+// used  to establish discovered vertecies.
+enum BFScolors {white, gray, black};
+
+typedef struct _BFSState {
+    BFScolors   color;
+    PRInt32     distance;
+    nsHashKey  *predecessor;
+} BFSState;
+
+#endif // __nsstreamconverterservice__h___

mozilla/netwerk/streamconv/test/Converters.cpp

@@ -0,0 +1,165 @@
+#include "Converters.h"
+#include "nsIStringStream.h"
+
+//////////////////////////////////////////////////
+// TestConverter
+//////////////////////////////////////////////////
+
+NS_IMPL_ISUPPORTS2(TestConverter, nsIStreamConverter, nsIStreamListener);
+
+TestConverter::TestConverter() {
+    NS_INIT_ISUPPORTS();
+}
+
+// Convert aFromStream (of type aFromType), to _retval (nsIInputStream of type aToType).
+// This Convert method simply converts the stream byte-by-byte, to the first character
+// in the aToType "string".
+NS_IMETHODIMP
+TestConverter::Convert(nsIInputStream *aFromStream, 
+                       const PRUnichar *aFromType, 
+                       const PRUnichar *aToType, 
+                       nsISupports *ctxt, 
+                       nsIInputStream **_retval) {
+    char buf[1024];
+    PRUint32 read;
+    nsresult rv = aFromStream->Read(buf, 1024, &read);
+    if (NS_FAILED(rv) || read == 0) return rv;
+
+    // Get the first character 
+    nsString to(aToType);
+    char *toMIME = to.ToNewCString();
+    char toChar = *toMIME;
+    nsMemory::Free(toMIME);
+
+    for (PRUint32 i = 0; i < read; i++) 
+        buf[i] = toChar;
+
+    nsString convDataStr;
+    convDataStr.AssignWithConversion(buf);
+    nsIInputStream *inputData = nsnull;
+    nsISupports *inputDataSup = nsnull;
+
+    rv = NS_NewStringInputStream(&inputDataSup, convDataStr);
+    if (NS_FAILED(rv)) return rv;
+
+    rv = inputDataSup->QueryInterface(NS_GET_IID(nsIInputStream), (void**)&inputData);
+    NS_RELEASE(inputDataSup);
+    *_retval = inputData;
+    if (NS_FAILED(rv)) return rv;
+
+    return NS_OK; 
+}
+
+/* This method initializes any internal state before the stream converter
+ * begins asyncronous conversion */
+NS_IMETHODIMP
+TestConverter::AsyncConvertData(const PRUnichar *aFromType,
+                                const PRUnichar *aToType, 
+                                nsIStreamListener *aListener, 
+                                nsISupports *ctxt) {
+    NS_ASSERTION(aListener, "null listener");
+
+    mListener = aListener;
+    NS_ADDREF(mListener);
+
+    // based on these types, setup internal state to handle the appropriate conversion.
+    fromType = aFromType;
+    toType = aToType;
+
+    return NS_OK; 
+};
+
+// nsIStreamListener method
+/* This method handles asyncronous conversion of data. */
+NS_IMETHODIMP
+TestConverter::OnDataAvailable(nsIRequest* request,
+                               nsISupports *ctxt, 
+                               nsIInputStream *inStr, 
+                               PRUint32 sourceOffset, 
+                               PRUint32 count) {
+    nsresult rv;
+    nsIInputStream *convertedStream = nsnull;
+    // just make a syncronous call to the Convert() method.
+    // Anything can happen here, I just happen to be using the sync call to 
+    // do the actual conversion.
+    rv = Convert(inStr, fromType.GetUnicode(), toType.GetUnicode(), ctxt, &convertedStream);
+    if (NS_FAILED(rv)) return rv;
+
+    PRUint32 len;
+    convertedStream->Available(&len);
+    return mListener->OnDataAvailable(request, ctxt, convertedStream, sourceOffset, len);
+};
+
+// nsIStreamObserver methods
+/* These methods just pass through directly to the mListener */
+NS_IMETHODIMP
+TestConverter::OnStartRequest(nsIRequest* request, nsISupports *ctxt) {
+    return mListener->OnStartRequest(request, ctxt);
+};
+
+NS_IMETHODIMP
+TestConverter::OnStopRequest(nsIRequest* request, nsISupports *ctxt, 
+                             nsresult aStatus, const PRUnichar* aStatusArg) {
+    return mListener->OnStopRequest(request, ctxt, aStatus, aStatusArg);
+};
+
+
+////////////////////////////////////////////////////////////////////////
+// TestConverterFactory
+////////////////////////////////////////////////////////////////////////
+TestConverterFactory::TestConverterFactory(const nsCID &aClass, 
+                                   const char* className,
+                                   const char* contractID)
+    : mClassID(aClass), mClassName(className), mContractID(contractID)
+{
+    NS_INIT_ISUPPORTS();
+}
+
+TestConverterFactory::~TestConverterFactory()
+{
+}
+
+NS_IMPL_ISUPPORTS1(TestConverterFactory, nsIFactory)
+
+NS_IMETHODIMP
+TestConverterFactory::CreateInstance(nsISupports *aOuter,
+                                 const nsIID &aIID,
+                                 void **aResult)
+{
+    if (! aResult)
+        return NS_ERROR_NULL_POINTER;
+
+    if (aOuter)
+        return NS_ERROR_NO_AGGREGATION;
+
+    *aResult = nsnull;
+
+    nsresult rv = NS_OK;
+
+    nsISupports *inst = nsnull;
+    if (mClassID.Equals(kTestConverterCID)) {
+        TestConverter *conv = new TestConverter();
+        if (!conv) return NS_ERROR_OUT_OF_MEMORY;
+        conv->QueryInterface(NS_GET_IID(nsISupports), (void**)&inst);
+    }
+    else {
+        return NS_ERROR_NO_INTERFACE;
+    }
+
+    if (!inst)
+        return NS_ERROR_OUT_OF_MEMORY;
+    NS_ADDREF(inst);
+    *aResult = inst;
+    NS_RELEASE(inst);
+    return rv;
+}
+
+nsresult TestConverterFactory::LockFactory(PRBool aLock)
+{
+    // Not implemented in simplest case.
+    return NS_OK;
+}
+////////////////////////////////////////////////////////////////////////
+// TestConverterFactory END
+////////////////////////////////////////////////////////////////////////
+

mozilla/netwerk/streamconv/test/Converters.h

@@ -0,0 +1,68 @@
+#include "nsIStreamConverter.h"
+#include "nsString.h"
+#include "nsIFactory.h"
+
+/* This file defines stream converter components, and their accompanying factory class.
+ * These converters implement the nsIStreamConverter interface and support both
+ * asyncronous and syncronous stream conversion.
+ */
+
+///////////////////////////////////////////////
+// TestConverter
+#define NS_TESTCONVERTER_CID                         \
+{ /* B8A067B0-4450-11d3-A16E-0050041CAF44 */         \
+    0xb8a067b0,                                      \
+    0x4450,                                          \
+    0x11d3,                                          \
+    {0xa1, 0x6e, 0x00, 0x50, 0x04, 0x1c, 0xaf, 0x44} \
+}
+static NS_DEFINE_CID(kTestConverterCID,          NS_TESTCONVERTER_CID);
+
+class TestConverter : public nsIStreamConverter {
+public:
+    NS_DECL_ISUPPORTS
+    NS_DECL_NSISTREAMOBSERVER
+    NS_DECL_NSISTREAMLISTENER
+
+    TestConverter();
+    virtual ~TestConverter() {;};
+
+    // nsIStreamConverter methods
+    NS_IMETHOD Convert(nsIInputStream *aFromStream, const PRUnichar *aFromType, 
+                       const PRUnichar *aToType, nsISupports *ctxt, nsIInputStream **_retval);
+
+
+    NS_IMETHOD AsyncConvertData(const PRUnichar *aFromType, const PRUnichar *aToType, 
+                                nsIStreamListener *aListener, nsISupports *ctxt);
+
+    // member data
+    nsIStreamListener *mListener;
+    nsString fromType;
+    nsString toType;
+};
+
+//////////////////////////////////////////////////
+// FACTORY
+class TestConverterFactory : public nsIFactory
+{
+public:
+    TestConverterFactory(const nsCID &aClass, const char* className, const char* contractID);
+
+    // nsISupports methods
+    NS_DECL_ISUPPORTS
+
+    // nsIFactory methods
+    NS_IMETHOD CreateInstance(nsISupports *aOuter,
+                              const nsIID &aIID,
+                              void **aResult);
+
+    NS_IMETHOD LockFactory(PRBool aLock);
+
+protected:
+    virtual ~TestConverterFactory();
+
+protected:
+    nsCID       mClassID;
+    const char* mClassName;
+    const char* mContractID;
+};

mozilla/netwerk/streamconv/test/Makefile.in

@@ -0,0 +1,51 @@
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#
+
+DEPTH		= ../../..
+topsrcdir	= @top_srcdir@
+srcdir		= @srcdir@
+VPATH		= @srcdir@
+
+include $(DEPTH)/config/autoconf.mk
+
+MODULE		= TestStreamConv
+PROGRAM		= TestStreamConv$(BIN_SUFFIX)
+REQUIRES	= necko xpcom string
+
+CPPSRCS		= \
+		Converters.cpp \
+		TestStreamConv.cpp \
+		$(NULL)
+
+ifdef NO_LD_ARCHIVE_FLAGS
+LOST_SYM_LIBS	= -lxpcomds_s -lxptinfo -lmozreg_s
+endif
+
+LIBS		= \
+		$(XPCOM_LIBS) \
+		$(LOST_SYM_LIBS) \
+		$(NSPR_LIBS) \
+		$(NULL)
+
+include $(topsrcdir)/config/rules.mk
+
+DEFINES		+= -DUSE_NSREG
+

mozilla/netwerk/streamconv/test/TestStreamConv.cpp

@@ -0,0 +1,291 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ */
+
+#include "nsIServiceManager.h"
+#include "nsIComponentManager.h"
+#include "nsIStreamConverterService.h"
+#include "nsIStreamConverter.h"
+#include "nsICategoryManager.h"
+#include "nsIFactory.h"
+#include "nsIStringStream.h"
+#include "nsCOMPtr.h"
+#include "nsNetUtil.h"
+
+#include "nspr.h"
+
+#define ASYNC_TEST // undefine this if you want to test sycnronous conversion.
+
+/////////////////////////////////
+// Event pump setup
+/////////////////////////////////
+#include "nsIEventQueueService.h"
+#ifdef WIN32 
+#include <windows.h>
+#endif
+#ifdef XP_OS2
+#include <os2.h>
+#endif
+
+static int gKeepRunning = 0;
+static nsIEventQueue* gEventQ = nsnull;
+/////////////////////////////////
+// Event pump END
+/////////////////////////////////
+
+
+/////////////////////////////////
+// Test converters include
+/////////////////////////////////
+#include "Converters.h"
+
+// CID setup
+static NS_DEFINE_CID(kEventQueueServiceCID,      NS_EVENTQUEUESERVICE_CID);
+static NS_DEFINE_CID(kStreamConverterServiceCID, NS_STREAMCONVERTERSERVICE_CID);
+static NS_DEFINE_CID(kComponentManagerCID,       NS_COMPONENTMANAGER_CID);
+
+////////////////////////////////////////////////////////////////////////
+// EndListener - This listener is the final one in the chain. It
+//   receives the fully converted data, although it doesn't do anything with
+//   the data.
+////////////////////////////////////////////////////////////////////////
+class EndListener : public nsIStreamListener {
+public:
+    // nsISupports declaration
+    NS_DECL_ISUPPORTS
+
+    EndListener() {NS_INIT_ISUPPORTS();};
+
+    // nsIStreamListener method
+    NS_IMETHOD OnDataAvailable(nsIRequest* request, nsISupports *ctxt, nsIInputStream *inStr, 
+                               PRUint32 sourceOffset, PRUint32 count)
+    {
+        nsresult rv;
+        PRUint32 read, len;
+        rv = inStr->Available(&len);
+        if (NS_FAILED(rv)) return rv;
+
+        char *buffer = (char*)nsMemory::Alloc(len + 1);
+        if (!buffer) return NS_ERROR_OUT_OF_MEMORY;
+
+        rv = inStr->Read(buffer, len, &read);
+        buffer[len] = '\0';
+        if (NS_SUCCEEDED(rv)) {
+            printf("CONTEXT %p: Received %u bytes and the following data: \n %s\n\n", ctxt, read, buffer);
+        }
+        nsMemory::Free(buffer);
+
+        return NS_OK;
+    }
+
+    // nsIStreamObserver methods
+    NS_IMETHOD OnStartRequest(nsIRequest* request, nsISupports *ctxt) { return NS_OK; }
+
+    NS_IMETHOD OnStopRequest(nsIRequest* request, nsISupports *ctxt, 
+                             nsresult aStatus, const PRUnichar* aStatusArg) { return NS_OK; }
+};
+
+NS_IMPL_ISUPPORTS1(EndListener, nsIStreamListener);
+////////////////////////////////////////////////////////////////////////
+// EndListener END
+////////////////////////////////////////////////////////////////////////
+
+
+nsresult SendData(const char * aData, nsIStreamListener* aListener, nsIRequest* request) {
+    nsString data;
+    data.AssignWithConversion(aData);
+    nsCOMPtr<nsIInputStream> dataStream;
+    nsresult rv = NS_NewStringInputStream(getter_AddRefs(dataStream), data);
+    if (NS_FAILED(rv)) return rv;
+    return aListener->OnDataAvailable(request, nsnull, dataStream, 0, -1);
+}
+#define SEND_DATA(x) SendData(x, converterListener, request)
+
+int
+main(int argc, char* argv[])
+{
+    nsresult rv;
+
+    // Create the Event Queue for this thread...
+    NS_WITH_SERVICE(nsIEventQueueService, eventQService, kEventQueueServiceCID, &rv);
+    if (NS_FAILED(rv)) return rv;
+
+    rv = eventQService->CreateThreadEventQueue();
+    if (NS_FAILED(rv)) return rv;
+
+    eventQService->GetThreadEventQueue(NS_CURRENT_THREAD, &gEventQ);
+
+    rv = nsComponentManager::AutoRegister(nsIComponentManager::NS_Startup, NULL /* default */);
+    if (NS_FAILED(rv)) return rv;
+
+    nsCOMPtr<nsICategoryManager> catman =
+        do_GetService(NS_CATEGORYMANAGER_CONTRACTID, &rv);
+    if (NS_FAILED(rv)) return rv;
+    nsXPIDLCString previous;
+
+    ///////////////////////////////////////////
+    // BEGIN - Stream converter registration
+    //   All stream converters must register with the ComponentManager
+    ///////////////////////////////////////////
+
+    // these stream converters are just for testing. running this harness
+    // from the dist/bin dir will also pickup converters registered
+    // in other modules (necko converters for example).
+
+    char *converterList[] = {
+        "?from=a/foo&to=b/foo",
+        "?from=b/foo&to=c/foo",
+        "?from=b/foo&to=d/foo",
+        "?from=c/foo&to=d/foo",
+        "?from=d/foo&to=e/foo",
+        "?from=d/foo&to=f/foo",
+        "?from=t/foo&to=k/foo"
+    };
+
+    TestConverterFactory *convFactory = new TestConverterFactory(kTestConverterCID, "TestConverter", NS_ISTREAMCONVERTER_KEY);
+    nsCOMPtr<nsIFactory> convFactSup(do_QueryInterface(convFactory, &rv));
+    if (NS_FAILED(rv)) return rv;
+    rv = catman->AddCategoryEntry(NS_ISTREAMCONVERTER_KEY, "?from=a/foo&to=b/foo", "x",
+                                    PR_TRUE, PR_TRUE, getter_Copies(previous));
+    if (NS_FAILED(rv)) return rv;
+
+    PRUint32 count = 0;
+    while (count < sizeof(converterList)) {
+        // register the TestConverter with the component manager. One contractid registration
+        // per conversion pair (from - to pair).
+        nsCString contractID(NS_ISTREAMCONVERTER_KEY);
+        contractID.Append(converterList[count]);
+        rv = nsComponentManager::RegisterFactory(kTestConverterCID,
+                                                 "TestConverter",
+                                                 contractID.get(),
+                                                 convFactSup,
+                                                 PR_TRUE);
+        if (NS_FAILED(rv)) return rv;
+        rv = catman->AddCategoryEntry(NS_ISTREAMCONVERTER_KEY, converterList[count], nsnull,
+                                        PR_TRUE, PR_TRUE, getter_Copies(previous));
+        if (NS_FAILED(rv)) return rv;
+    }
+
+    NS_WITH_SERVICE(nsIStreamConverterService, StreamConvService, kStreamConverterServiceCID, &rv);
+    if (NS_FAILED(rv)) return rv;
+
+    // Define the *from* content type and *to* content-type for conversion.
+    nsString fromStr;
+    fromStr.AssignWithConversion("a/foo");
+    nsString toStr;
+    toStr.AssignWithConversion("c/foo");
+    
+#ifdef ASYNC_TEST
+    // ASYNCRONOUS conversion
+
+
+    // Build up a channel that represents the content we're
+    // starting the transaction with.
+    //
+    // sample multipart mixed content-type string:
+    // "multipart/x-mixed-replacE;boundary=thisrandomstring"
+    nsCOMPtr<nsIChannel> channel;
+    nsCOMPtr<nsIURI> dummyURI;
+    rv = NS_NewURI(getter_AddRefs(dummyURI), "http://meaningless");
+    if (NS_FAILED(rv)) return rv;
+
+    rv = NS_NewInputStreamChannel(getter_AddRefs(channel),
+                                  dummyURI,
+                                  nsnull,   // inStr
+                                  "text/plain", // content-type
+                                  -1);      // XXX fix contentLength
+    if (NS_FAILED(rv)) return rv;
+
+    nsCOMPtr<nsIRequest> request(do_QueryInterface(channel));
+
+    // setup a listener to receive the converted data. This guy is the end
+    // listener in the chain, he wants the fully converted (toType) data.
+    // An example of this listener in mozilla would be the DocLoader.
+    nsCOMPtr<nsIStreamListener> dataReceiver = new EndListener();
+
+    // setup a listener to push the data into. This listener sits inbetween the
+    // unconverted data of fromType, and the final listener in the chain (in this case
+    // the dataReceiver.
+    nsCOMPtr<nsIStreamListener> converterListener;
+    rv = StreamConvService->AsyncConvertData(fromStr.GetUnicode(), toStr.GetUnicode(), 
+                                             dataReceiver, nsnull, getter_AddRefs(converterListener));
+    if (NS_FAILED(rv)) return rv;
+
+    // at this point we have a stream listener to push data to, and the one
+    // that will receive the converted data. Let's mimic On*() calls and get the conversion
+    // going. Typically these On*() calls would be made inside their respective wrappers On*()
+    // methods.
+    rv = converterListener->OnStartRequest(request, nsnull);
+    if (NS_FAILED(rv)) return rv;
+
+
+    rv = SEND_DATA("aaa");
+    if (NS_FAILED(rv)) return rv;
+    
+    rv = SEND_DATA("aaa");
+    if (NS_FAILED(rv)) return rv;    
+
+    // Finish the request.
+    rv = converterListener->OnStopRequest(request, nsnull, rv, nsnull);
+    if (NS_FAILED(rv)) return rv;
+
+
+#else
+    // SYNCRONOUS conversion
+    nsCOMPtr<nsIInputStream> convertedData;
+    rv = StreamConvService->Convert(inputData, fromStr.GetUnicode(), toStr.GetUnicode(), 
+                                    nsnull, getter_AddRefs(convertedData));
+    if (NS_FAILED(rv)) return rv;
+#endif
+
+    // Enter the message pump to allow the URL load to proceed.
+    while ( gKeepRunning ) {
+#ifdef WIN32
+        MSG msg;
+
+        if (GetMessage(&msg, NULL, 0, 0)) {
+            TranslateMessage(&msg);
+            DispatchMessage(&msg);
+        } else {
+            gKeepRunning = 0;
+    }
+#else
+#ifdef XP_MAC
+    /* Mac stuff is missing here! */
+#else
+#ifdef XP_OS2
+    QMSG qmsg;
+
+    if (WinGetMsg(0, &qmsg, 0, 0, 0))
+      WinDispatchMsg(0, &qmsg);
+    else
+      gKeepRunning = FALSE;
+#else
+    PLEvent *gEvent;
+    rv = gEventQ->GetEvent(&gEvent);
+    rv = gEventQ->HandleEvent(gEvent);
+#endif /* XP_UNIX */
+#endif /* XP_OS2 */
+#endif /* !WIN32 */
+    }
+
+    return NS_ShutdownXPCOM(NULL);
+}

mozilla/netwerk/streamconv/test/makefile.win

@@ -0,0 +1,62 @@
+#!nmake
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+INCS = $(INCS)                  \
+        -I$(DEPTH)\dist\include \
+        $(NULL)
+
+LLIBS=                  \
+ $(DIST)\lib\xpcom.lib      \
+ $(LIBNSPR)             \
+ $(NULL)
+
+
+DEPTH=..\..\..
+
+include <$(DEPTH)/config/config.mak>
+
+
+MAKE_OBJ_TYPE   = EXE
+PROGRAM = .\$(OBJDIR)\TestStreamConv.exe
+
+OBJS =                                      \
+	.\$(OBJDIR)\Converters.obj     \
+	.\$(OBJDIR)\TestStreamConv.obj     \
+	$(NULL)
+
+LLFLAGS=-SUBSYSTEM:CONSOLE
+
+include <$(DEPTH)\config\rules.mak>
+
+!ifdef MOZ_NO_DEBUG_RTL
+OS_CFLAGS = $(OS_CFLAGS) -DMOZ_NO_DEBUG_RTL
+!endif
+
+!if defined(NGPREFS)
+OS_CFLAGS = $(OS_CFLAGS) -DNGPREFS
+!endif
+
+install:: $(PROGRAM)
+	$(MAKE_INSTALL) $(PROGRAM) $(DIST)\bin
+
+clobber::
+	rm -f $(DIST)\bin\TestStreamConv.exe
+

mozilla/webtools/bugzilla/Attachment.pm

@@ -1,97 +0,0 @@
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-#                 Myk Melez <myk@mozilla.org>
-
-############################################################################
-# Module Initialization
-############################################################################
-
-use diagnostics;
-use strict;
-
-package Attachment;
-
-# This module requires that its caller have said "require CGI.pl" to import
-# relevant functions from that script and its companion globals.pl.
-
-############################################################################
-# Functions
-############################################################################
-
-sub query
-{
-  # Retrieves and returns an array of attachment records for a given bug. 
-  # This data should be given to attachment/list.atml in an
-  # "attachments" variable.
-  my ($bugid) = @_;
-
-  my $in_editbugs = &::UserInGroup("editbugs");
-
-  # Retrieve a list of attachments for this bug and write them into an array
-  # of hashes in which each hash represents a single attachment.
-  &::SendSQL("
-              SELECT attach_id, creation_ts, mimetype, description, ispatch, 
-               isobsolete, submitter_id 
-              FROM attachments WHERE bug_id = $bugid ORDER BY attach_id
-            ");
-  my @attachments = ();
-  while (&::MoreSQLData()) {
-    my %a;
-    my $submitter_id;
-    ($a{'attachid'}, $a{'date'}, $a{'contenttype'}, $a{'description'},
-     $a{'ispatch'}, $a{'isobsolete'}, $submitter_id) = &::FetchSQLData();
-
-    # Format the attachment's creation/modification date into a standard
-    # format (YYYY-MM-DD HH:MM)
-    if ($a{'date'} =~ /^(\d\d\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)$/) {
-        $a{'date'} = "$1-$2-$3 $4:$5";
-    }
-
-    # Retrieve a list of status flags that have been set on the attachment.
-    &::PushGlobalSQLState();
-    &::SendSQL(" 
-                SELECT   name 
-                FROM     attachstatuses, attachstatusdefs 
-                WHERE    attach_id = $a{'attachid'} 
-                AND      attachstatuses.statusid = attachstatusdefs.id
-                ORDER BY sortkey
-              ");
-    my @statuses = ();
-    while (&::MoreSQLData()) { 
-      my ($status) = &::FetchSQLData(); 
-      push @statuses , $status;
-    }
-    $a{'statuses'} = \@statuses;
-    &::PopGlobalSQLState();
-
-    # We will display the edit link if the user can edit the attachment;
-    # ie the are the submitter, or they have canedit.
-    # Also show the link if the user is not logged in - in that cae,
-    # They'll be prompted later
-    $a{'canedit'} = ($::userid == 0 || $submitter_id == $::userid ||
-                     $in_editbugs);
-    push @attachments, \%a;
-  }
-  
-  return \@attachments;  
-}
-
-1;

mozilla/webtools/bugzilla/Bug.pm

@@ -1,547 +0,0 @@
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Dawn Endico    <endico@mozilla.org>
-#                 Terry Weissman <terry@mozilla.org>
-#                 Chris Yeh      <cyeh@bluemartini.com>
-
-use diagnostics;
-use strict;
-
-use DBI;
-use RelationSet;
-use vars qw($unconfirmedstate $legal_keywords);
-require "globals.pl";
-require "CGI.pl";
-package Bug;
-use CGI::Carp qw(fatalsToBrowser);
-my %ok_field;
-
-for my $key (qw (bug_id product version rep_platform op_sys bug_status 
-                resolution priority bug_severity component assigned_to
-                reporter bug_file_loc short_desc target_milestone 
-                qa_contact status_whiteboard creation_ts groupset 
-                delta_ts votes whoid usergroupset comment query error) ){
-    $ok_field{$key}++;
-    }
-
-# create a new empty bug
-#
-sub new {
-  my $type = shift();
-  my %bug;
-
-  # create a ref to an empty hash and bless it
-  #
-  my $self = {%bug};
-  bless $self, $type;
-
-  # construct from a hash containing a bug's info
-  #
-  if ($#_ == 1) {
-    $self->initBug(@_);
-  } else {
-    confess("invalid number of arguments \($#_\)($_)");
-  }
-
-  # bless as a Bug
-  #
-  return $self;
-}
-
-
-
-# dump info about bug into hash unless user doesn't have permission
-# user_id 0 is used when person is not logged in.
-#
-sub initBug  {
-  my $self = shift();
-  my ($bug_id, $user_id) = (@_);
-
-  my $old_bug_id = $bug_id;
-  if ((! defined $bug_id) || (!$bug_id) || (!&::detaint_natural($bug_id))) {
-      # no bug number given
-      $self->{'bug_id'} = $old_bug_id;
-      $self->{'error'} = "InvalidBugId";
-      return $self;
-  }
-
-# default userid 0, or get DBID if you used an email address
-  unless (defined $user_id) {
-    $user_id = 0;
-  }
-  else {
-     if ($user_id =~ /^\@/) {
-        $user_id = &::DBname_to_id($user_id); 
-     }
-  }
-     
-
-  &::ConnectToDatabase();
-  &::GetVersionTable();
-
-  # this verification should already have been done by caller
-  # my $loginok = quietly_check_login();
-
-
-  $self->{'whoid'} = $user_id;
-  &::SendSQL("SELECT groupset FROM profiles WHERE userid=$self->{'whoid'}");
-  my $usergroupset = &::FetchOneColumn();
-  if (!$usergroupset) { $usergroupset = '0' }
-  $self->{'usergroupset'} = $usergroupset;
-
-  # Check to see if we can see this bug
-  if (!&::CanSeeBug($bug_id, $user_id, $usergroupset)) {
-      # Permission denied to see bug 
-      $self->{'bug_id'} = $old_bug_id;
-      $self->{'error'} = "PermissionDenied";
-      return $self;
-  }
-
-    my $query = "";
-    if ($::driver eq 'mysql') {
-        $query = "
-    select
-      bugs.bug_id, product, version, rep_platform, op_sys, bug_status,
-      resolution, priority, bug_severity, component, assigned_to, reporter,
-      bug_file_loc, short_desc, target_milestone, qa_contact,
-      status_whiteboard, date_format(creation_ts,'%Y-%m-%d %H:%i'),
-      groupset, delta_ts, sum(votes.count)
-    from bugs left join votes using(bug_id)
-    where bugs.bug_id = $bug_id
-    group by bugs.bug_id";
-    } elsif ($::driver eq 'Pg') {
-        $query = "
-    select
-      bugs.bug_id, product, version, rep_platform, op_sys, bug_status,
-      resolution, priority, bug_severity, component, assigned_to, reporter,
-      bug_file_loc, short_desc, target_milestone, qa_contact,
-      status_whiteboard, creation_ts,
-      groupset, delta_ts, sum(votes.count)
-    from bugs left join votes using(bug_id)
-    where bugs.bug_id = $bug_id
-    and (bugs.groupset & int8($usergroupset)) = bugs.groupset
-    group by bugs.bug_id, product, version, rep_platform, op_sys, bug_status,
-         resolution, priority, bug_severity, component, assigned_to, reporter,
-         bug_file_loc, short_desc, target_milestone, qa_contact, status_whiteboard,
-         creation_ts, groupset, delta_ts";
-    }
-
-  &::SendSQL($query);
-  my @row;
-
-  if (@row = &::FetchSQLData()) {
-    my $count = 0;
-    my %fields;
-    foreach my $field ("bug_id", "product", "version", "rep_platform",
-                       "op_sys", "bug_status", "resolution", "priority",
-                       "bug_severity", "component", "assigned_to", "reporter",
-                       "bug_file_loc", "short_desc", "target_milestone",
-                       "qa_contact", "status_whiteboard", "creation_ts",
-                       "groupset", "delta_ts", "votes") {
-        $fields{$field} = shift @row;
-        if ($fields{$field}) {
-            $self->{$field} = $fields{$field};
-        }
-        $count++;
-    }
-  } else {
-    &::SendSQL("select groupset from bugs where bug_id = $bug_id");
-    if (@row = &::FetchSQLData()) {
-      $self->{'bug_id'} = $bug_id;
-      $self->{'error'} = "NotPermitted";
-      return $self;
-    } else {
-      $self->{'bug_id'} = $bug_id;
-      $self->{'error'} = "NotFound";
-      return $self;
-    }
-  }
-
-  $self->{'assigned_to'} = &::DBID_to_name($self->{'assigned_to'});
-  $self->{'reporter'} = &::DBID_to_name($self->{'reporter'});
-
-  my $ccSet = new RelationSet;
-  $ccSet->mergeFromDB("select who from cc where bug_id=$bug_id");
-  my @cc = $ccSet->toArrayOfStrings();
-  if (@cc) {
-    $self->{'cc'} = \@cc;
-  }
-
-  if (&::Param("useqacontact") && (defined $self->{'qa_contact'}) ) {
-    my $name = $self->{'qa_contact'} > 0 ? &::DBID_to_name($self->{'qa_contact'}) :"";
-    if ($name) {
-      $self->{'qa_contact'} = $name;
-    }
-  }
-
-  if (@::legal_keywords) {
-    &::SendSQL("SELECT keyworddefs.name 
-              FROM keyworddefs, keywords
-             WHERE keywords.bug_id = $bug_id 
-               AND keyworddefs.id = keywords.keywordid
-          ORDER BY keyworddefs.name");
-    my @list;
-    while (&::MoreSQLData()) {
-        push(@list, &::FetchOneColumn());
-    }
-    if (@list) {
-      $self->{'keywords'} = join(', ', @list);
-    }
-  }
-
-  &::SendSQL("select attach_id, creation_ts, description 
-           from attachments 
-           where bug_id = $bug_id");
-  my @attachments;
-  while (&::MoreSQLData()) {
-    my ($attachid, $date, $desc) = (&::FetchSQLData());
-    if ($date =~ /^(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)$/) {
-        $date = "$3/$4/$2 $5:$6";
-      my %attach;
-      $attach{'attachid'} = $attachid;
-      $attach{'date'} = $date;
-      $attach{'desc'} = $desc;
-      push @attachments, \%attach;
-    }
-  }
-  if (@attachments) {
-    $self->{'attachments'} = \@attachments;
-  }
-
-  &::SendSQL("select bug_id, who, bug_when, thetext 
-           from longdescs 
-           where bug_id = $bug_id");
-  my @longdescs;
-  while (&::MoreSQLData()) {
-    my ($bug_id, $who, $bug_when, $thetext) = (&::FetchSQLData());
-    my %longdesc;
-    $longdesc{'who'} = $who;
-    $longdesc{'bug_when'} = $bug_when;
-    $longdesc{'thetext'} = $thetext;
-    push @longdescs, \%longdesc;
-  }
-  if (@longdescs) {
-    $self->{'longdescs'} = \@longdescs;
-  }
-
-  if (&::Param("usedependencies")) {
-    my @depends = EmitDependList("blocked", "dependson", $bug_id);
-    if ( @depends ) {
-      $self->{'dependson'} = \@depends;
-    }
-    my @blocks = EmitDependList("dependson", "blocked", $bug_id);
-    if ( @blocks ) {
-      $self->{'blocks'} = \@blocks;
-    }
-  }
-
-  return $self;
-}
-
-
-
-# given a bug hash, emit xml for it. with file header provided by caller
-#
-sub emitXML {
-  ( $#_ == 0 ) || confess("invalid number of arguments");
-  my $self = shift();
-  my $xml;
-
-
-  if (exists $self->{'error'}) {
-    $xml .= "<bug error=\"$self->{'error'}\">\n";
-    $xml .= "  <bug_id>$self->{'bug_id'}</bug_id>\n";
-    $xml .= "</bug>\n";
-    return $xml;
-  }
-
-  $xml .= "<bug>\n";
-
-  foreach my $field ("bug_id", "bug_status", "product",
-      "priority", "version", "rep_platform", "assigned_to", "delta_ts", 
-      "component", "reporter", "target_milestone", "bug_severity", 
-      "creation_ts", "qa_contact", "op_sys", "resolution", "bug_file_loc",
-      "short_desc", "keywords", "status_whiteboard") {
-    if ($self->{$field}) {
-      $xml .= "  <$field>" . QuoteXMLChars($self->{$field}) . "</$field>\n";
-    }
-  }
-
-  foreach my $field ("dependson", "blocks", "cc") {
-    if (defined $self->{$field}) {
-      for (my $i=0 ; $i < @{$self->{$field}} ; $i++) {
-        $xml .= "  <$field>" . $self->{$field}[$i] . "</$field>\n";
-      }
-    }
-  }
-
-  if (defined $self->{'longdescs'}) {
-    for (my $i=0 ; $i < @{$self->{'longdescs'}} ; $i++) {
-      $xml .= "  <long_desc>\n"; 
-      $xml .= "   <who>" . &::DBID_to_name($self->{'longdescs'}[$i]->{'who'}) 
-                         . "</who>\n"; 
-      $xml .= "   <bug_when>" . $self->{'longdescs'}[$i]->{'bug_when'} 
-                              . "</bug_when>\n"; 
-      $xml .= "   <thetext>" . QuoteXMLChars($self->{'longdescs'}[$i]->{'thetext'})
-                             . "</thetext>\n"; 
-      $xml .= "  </long_desc>\n"; 
-    }
-  }
-
-  if (defined $self->{'attachments'}) {
-    for (my $i=0 ; $i < @{$self->{'attachments'}} ; $i++) {
-      $xml .= "  <attachment>\n"; 
-      $xml .= "    <attachid>" . $self->{'attachments'}[$i]->{'attachid'}
-                              . "</attachid>\n"; 
-      $xml .= "    <date>" . $self->{'attachments'}[$i]->{'date'} . "</date>\n"; 
-      $xml .= "    <desc>" . QuoteXMLChars($self->{'attachments'}[$i]->{'desc'}) . "</desc>\n"; 
-    # $xml .= "    <type>" . $self->{'attachments'}[$i]->{'type'} . "</type>\n"; 
-    # $xml .= "    <data>" . $self->{'attachments'}[$i]->{'data'} . "</data>\n"; 
-      $xml .= "  </attachment>\n"; 
-    }
-  }
-
-  $xml .= "</bug>\n";
-  return $xml;
-}
-
-sub EmitDependList {
-  my ($myfield, $targetfield, $bug_id) = (@_);
-  my @list;
-  &::SendSQL("select dependencies.$targetfield, bugs.bug_status
-           from dependencies, bugs
-           where dependencies.$myfield = $bug_id
-             and bugs.bug_id = dependencies.$targetfield
-           order by dependencies.$targetfield");
-  while (&::MoreSQLData()) {
-    my ($i, $stat) = (&::FetchSQLData());
-    push @list, $i;
-  }
-  return @list;
-}
-
-sub QuoteXMLChars {
-  $_[0] =~ s/&/&amp;/g;
-  $_[0] =~ s/</&lt;/g;
-  $_[0] =~ s/>/&gt;/g;
-  $_[0] =~ s/'/&apos;/g;
-  $_[0] =~ s/"/&quot;/g;
-# $_[0] =~ s/([\x80-\xFF])/&XmlUtf8Encode(ord($1))/ge;
-  return($_[0]);
-}
-
-sub XML_Header {
-  my ($urlbase, $version, $maintainer, $exporter) = (@_);
-
-  my $xml;
-  $xml = "<?xml version=\"1.0\" standalone=\"yes\"?>\n";
-  $xml .= "<!DOCTYPE bugzilla SYSTEM \"$urlbase";
-  if (! ($urlbase =~ /.+\/$/)) {
-    $xml .= "/";
-  }
-  $xml .= "bugzilla.dtd\">\n";
-  $xml .= "<bugzilla";
-  if (defined $exporter) {
-    $xml .= " exporter=\"$exporter\"";
-  }
-  $xml .= " version=\"$version\"";
-  $xml .= " urlbase=\"$urlbase\"";
-  $xml .= " maintainer=\"$maintainer\">\n";
-  return ($xml);
-}
-
-
-sub XML_Footer {
-  return ("</bugzilla>\n");
-}
-
-sub UserInGroup {
-    my $self = shift();
-    my ($groupname) = (@_);
-    if ($self->{'usergroupset'} eq "0") {
-        return 0;
-    }
-    &::ConnectToDatabase();
-    &::SendSQL("select (group_bit & int8($self->{'usergroupset'})) != 0 from groups where name = " 
-           . &::SqlQuote($groupname));
-    my $bit = &::FetchOneColumn();
-    if ($bit) {
-        return 1;
-    }
-    return 0;
-}
-
-sub CanChangeField {
-   my $self = shift();
-   my ($f, $oldvalue, $newvalue) = (@_);
-   my $UserInEditGroupSet = -1;
-   my $UserInCanConfirmGroupSet = -1;
-   my $ownerid;
-   my $reporterid;
-   my $qacontactid;
-
-    if ($f eq "assigned_to" || $f eq "reporter" || $f eq "qa_contact") {
-        if ($oldvalue =~ /^\d+$/) {
-            if ($oldvalue == 0) {
-                $oldvalue = "";
-            } else {
-                $oldvalue = &::DBID_to_name($oldvalue);
-            }
-        }
-    }
-    if ($oldvalue eq $newvalue) {
-        return 1;
-    }
-    if (&::trim($oldvalue) eq &::trim($newvalue)) {
-        return 1;
-    }
-    if ($f =~ /^longdesc/) {
-        return 1;
-    }
-    if ($UserInEditGroupSet < 0) {
-        $UserInEditGroupSet = UserInGroup($self, "editbugs");
-    }
-    if ($UserInEditGroupSet) {
-        return 1;
-    }
-    &::SendSQL("SELECT reporter, assigned_to, qa_contact FROM bugs " .
-                "WHERE bug_id = $self->{'bug_id'}");
-    ($reporterid, $ownerid, $qacontactid) = (&::FetchSQLData());
-
-    # Let reporter change bug status, even if they can't edit bugs.
-    # If reporter can't re-open their bug they will just file a duplicate.
-    # While we're at it, let them close their own bugs as well.
-    if ( ($f eq "bug_status") && ($self->{'whoid'} eq $reporterid) ) {
-        return 1;
-    }
-    if ($f eq "bug_status" && $newvalue ne $::unconfirmedstate &&
-        &::IsOpenedState($newvalue)) {
-
-        # Hmm.  They are trying to set this bug to some opened state
-        # that isn't the UNCONFIRMED state.  Are they in the right
-        # group?  Or, has it ever been confirmed?  If not, then this
-        # isn't legal.
-
-        if ($UserInCanConfirmGroupSet < 0) {
-            $UserInCanConfirmGroupSet = &::UserInGroup("canconfirm");
-        }
-        if ($UserInCanConfirmGroupSet) {
-            return 1;
-        }
-        &::SendSQL("SELECT everconfirmed FROM bugs WHERE bug_id = $self->{'bug_id'}");
-        my $everconfirmed = FetchOneColumn();
-        if ($everconfirmed) {
-            return 1;
-        }
-    } elsif ($reporterid eq $self->{'whoid'} || $ownerid eq $self->{'whoid'} ||
-             $qacontactid eq $self->{'whoid'}) {
-        return 1;
-    }
-    $self->{'error'} = "
-Only the owner or submitter of the bug, or a sufficiently
-empowered user, may make that change to the $f field."
-}
-
-sub Collision {
-    my $self = shift();
-    my $write = "WRITE";        # Might want to make a param to control
-                                # whether we do LOW_PRIORITY ...
-    if ($::driver eq 'mysql') {
-        &::SendSQL("LOCK TABLES bugs $write, bugs_activity $write, cc $write, " .
-                "cc AS selectVisible_cc $write, " .
-                "profiles $write, dependencies $write, votes $write, " .
-                "keywords $write, longdescs $write, fielddefs $write, " .
-                "keyworddefs READ, groups READ, attachments READ, products READ");
-    } 
-    &::SendSQL("SELECT delta_ts FROM bugs where bug_id=$self->{'bug_id'}");
-    my $delta_ts = &::FetchOneColumn();
-    if ($::driver eq 'mysql') {
-        &::SendSQL("unlock tables");
-    }
-    if ($self->{'delta_ts'} ne $delta_ts) {
-       return 1;
-    }
-    else {
-       return 0;
-    }
-}
-
-sub AppendComment  {
-    my $self = shift();
-    my ($comment) = (@_);
-    $comment =~ s/\r\n/\n/g;     # Get rid of windows-style line endings.
-    $comment =~ s/\r/\n/g;       # Get rid of mac-style line endings.
-    if ($comment =~ /^\s*$/) {  # Nothin' but whitespace.
-        return;
-    }
-
-    &::SendSQL("INSERT INTO longdescs (bug_id, who, bug_when, thetext) " .
-            "VALUES($self->{'bug_id'}, $self->{'whoid'}, now(), " . &::SqlQuote($comment) . ")");
-
-    &::SendSQL("UPDATE bugs SET delta_ts = now() WHERE bug_id = $self->{'bug_id'}");
-}
-
-
-#from o'reilley's Programming Perl
-sub display {
-    my $self = shift;
-    my @keys;
-    if (@_ == 0) {                  # no further arguments
-        @keys = sort keys(%$self);
-    }  else {
-        @keys = @_;                 # use the ones given
-    }
-    foreach my $key (@keys) {
-        print "\t$key => $self->{$key}\n";
-    }
-}
-
-sub CommitChanges {
-
-#snapshot bug
-#snapshot dependencies
-#check can change fields
-#check collision
-#lock and change fields
-#notify through mail
-
-}
-
-sub AUTOLOAD {
-  use vars qw($AUTOLOAD);
-  my $self = shift;
-  my $type = ref($self) || $self;
-  my $attr = $AUTOLOAD;
-
-  $attr =~ s/.*:://;
-  return unless $attr=~ /[^A-Z]/;
-  if (@_) {
-    $self->{$attr} = shift;
-    return;
-  }
-  confess ("invalid bug attribute $attr") unless $ok_field{$attr};
-  if (defined $self->{$attr}) {
-    return $self->{$attr};
-  } else {
-    return '';
-  }
-}
-
-1;

mozilla/webtools/bugzilla/README

@@ -1,16 +0,0 @@
-* This README is no longer used to house installation instructions.  Instead,
-it contains pointers to where you may find the information you need.
-
-* Installation instructions are now found in docs/, with a variety of document
-types available.  Please refer to these documents when installing, configuring,
-and maintaining your Bugzilla installation.  A helpful starting point is
-docs/txt/Bugzilla-Guide.txt, or with a web browser at docs/html/index.html.
-
-* Release notes for people upgrading to a new version of Bugzilla are
-available at docs/rel_notes.txt.
-
-* If you wish to contribute to the documentation, please read docs/README.docs.
-
-* The Bugzilla web site is at "http://www.mozilla.org/projects/bugzilla/".
-This site will contain the latest Bugzilla information, including how to
-report bugs and how to get help with Bugzilla.

mozilla/webtools/bugzilla/RelationSet.pm

@@ -1,268 +0,0 @@
-# 
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Bugzilla Bug Tracking System.
-# 
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 2000 Netscape Communications Corporation.  All
-# Rights Reserved.
-# 
-# Contributor(s): Dan Mosedale <dmose@mozilla.org>
-#                 Terry Weissman <terry@mozilla.org>
-#                 Dave Miller <justdave@syndicomm.com>
-
-# This object models a set of relations between one item and a group
-# of other items.  An example is the set of relations between one bug
-# and the users CCed on that bug.  Currently, the relation objects are
-# expected to be bugzilla userids.  However, this could and perhaps
-# should be generalized to work with non userid objects, such as
-# keywords associated with a bug.  That shouldn't be hard to do; it
-# might involve turning this into a virtual base class, and having
-# UserSet and KeywordSet types that inherit from it.
-
-use diagnostics;
-use strict;
-
-# Everything that uses RelationSet should already have globals.pl loaded
-# so we don't want to load it here.  Doing so causes a loop in Perl because
-# globals.pl turns around and does a 'use RelationSet'
-# See http://bugzilla.mozilla.org/show_bug.cgi?id=72862
-#require "globals.pl";
-
-package RelationSet;
-use CGI::Carp qw(fatalsToBrowser);
-
-# create a new empty RelationSet
-#
-sub new {
-  my $type = shift();
-
-  # create a ref to an empty hash and bless it
-  #
-  my $self = {};
-  bless $self, $type;
-
-  # construct from a comma-delimited string
-  # 
-  if ($#_ == 0) {
-    $self->mergeFromString($_[0]);
-  }
-  # unless this was a constructor for an empty list, somebody screwed up.
-  #
-  elsif ( $#_ != -1 ) {
-    confess("invalid number of arguments");
-  }
-
-  # bless as a RelationSet
-  #
-  return $self;
-}
-
-# Assumes that the set of relations "FROM $table WHERE $constantSql and 
-# $column = $value" is currently represented by $self, and this set should
-# be updated to look like $other.  
-#
-# Returns an array of two strings, one INSERT and one DELETE, which will
-# make this change.  Either or both strings may be the empty string,
-# meaning that no INSERT or DELETE or both (respectively) need to be done.
-#
-# THE CALLER IS RESPONSIBLE FOR ANY DESIRED LOCKING AND/OR CONSISTENCY 
-# CHECKS (not to mention doing the SendSQL() calls).
-#
-sub generateSqlDeltas {
-  ($#_ == 5) || confess("invalid number of arguments");
-  my ( $self, # instance ptr to set representing the existing state
-       $endState, # instance ptr to set representing the desired state
-       $table, # table where these relations are kept
-       $invariantName, # column held const for a RelationSet (often "bug_id")
-       $invariantValue, # what to hold the above column constant at
-       $columnName # the column which varies (often a userid)
-     ) = @_;
-
-  # construct the insert list by finding relations which exist in the
-  # end state but not the current state.
-  #
-  my @endStateRelations = keys(%$endState);
-  my @insertList = ();
-  foreach ( @endStateRelations ) {
-    push ( @insertList, $_ ) if ( ! exists $$self{"$_"} );
-  }
-
-  # we've built the list.  If it's non-null, add required sql chrome.
-  #
-  my $sqlInsert="";
-  if ( $#insertList > -1 ) {
-    $sqlInsert = "INSERT INTO $table ($invariantName, $columnName) VALUES " .
-      join (",", 
-            map ( "($invariantValue, $_)" , @insertList ) 
-           );
-  }
-     
-  # construct the delete list by seeing which relations exist in the
-  # current state but not the end state
-  #
-  my @selfRelations = keys(%$self);
-  my @deleteList = ();
-  foreach ( @selfRelations ) {
-    push (@deleteList, $_) if ( ! exists $$endState{"$_"} );
-  }
-
-  # we've built the list.  if it's non-empty, add required sql chrome.
-  #
-  my $sqlDelete = "";
-  if ( $#deleteList > -1 ) {
-    $sqlDelete = "DELETE FROM $table WHERE $invariantName = $invariantValue " .
-      "AND $columnName IN ( " . join (",", @deleteList) . " )";
-  } 
-
-  return ($sqlInsert, $sqlDelete);
-}
-
-# compare the current object with another.  
-#
-sub isEqual {
-  ($#_ == 1) || confess("invalid number of arguments");
-  my $self = shift();
-  my $other = shift();
-
-  # get arrays of the keys for faster processing
-  #
-  my @selfRelations = keys(%$self);
-  my @otherRelations = keys(%$other);
- 
-  # make sure the arrays are the same size
-  #
-  return 0 if ( $#selfRelations != $#otherRelations );
-
-  # bail out if any of the elements are different
-  #
-  foreach my $relation ( @selfRelations ) {
-    return 0 if ( !exists $$other{$relation})
-  }
-
-  # we made it!
-  #
-  return 1;
-
-}
-
-# merge the results of a SQL command into this set
-#
-sub mergeFromDB {
-  ( $#_ == 1 ) || confess("invalid number of arguments");
-  my $self = shift();
-
-  &::SendSQL(shift());
-  while (my @row = &::FetchSQLData()) {
-    $$self{$row[0]} = 1;
-  }
-
-  return;
-}
-
-# merge a set in string form into this set
-#
-sub mergeFromString {
-  ($#_ == 1) || confess("invalid number of arguments");
-  my $self = shift();
-
-  # do the merge
-  #
-  foreach my $person (split(/[ ,]/, shift())) {
-    if ($person ne "") {
-      $$self{&::DBNameToIdAndCheck($person)} = 1;
-    }
-  }
-}
-
-# remove a set in string form from this set
-#
-sub removeItemsInString {
-  ($#_ == 1) || confess("invalid number of arguments");
-  my $self = shift();
-
-  # do the merge
-  #
-  foreach my $person (split(/[ ,]/, shift())) {
-    if ($person ne "") {
-      my $dbid = &::DBNameToIdAndCheck($person);
-      if (exists $$self{$dbid}) {
-        delete $$self{$dbid};
-      }
-    }
-  }
-}
-
-# remove a set in array form from this set
-#
-sub removeItemsInArray {
-  ($#_ > 0) || confess("invalid number of arguments");
-  my $self = shift();
-
-  # do the merge
-  #
-  while (my $person = shift()) {
-    if ($person ne "") {
-      my $dbid = &::DBNameToIdAndCheck($person);
-      if (exists $$self{$dbid}) {
-        delete $$self{$dbid};
-      }
-    }
-  }
-}
-
-# return the number of elements in this set
-#
-sub size {
-  my $self = shift();
-
-  my @k = keys(%$self);
-  return $#k++;
-}
-
-# return this set in array form
-#
-sub toArray {
-  my $self= shift();
-
-  return keys(%$self);
-}
-
-# return this set as an array of strings
-#
-sub toArrayOfStrings {
-  ($#_ == 0) || confess("invalid number of arguments");
-  my $self = shift();
-
-  my @result = ();
-  foreach my $i ( keys %$self ) {
-    push @result, &::DBID_to_name($i);
-  }
-
-  return sort { lc($a) cmp lc($b) } @result;
-}  
-
-# return this set in string form (comma-separated and sorted)
-#
-sub toString {
-  ($#_ == 0) || confess("invalid number of arguments");
-  my $self = shift();
-
-  my @result = ();
-  foreach my $i ( keys %$self ) {
-    push @result, &::DBID_to_name($i);
-  }
-
-  return join(',', sort(@result));
-}  
-
-1;

mozilla/webtools/bugzilla/Token.pm

@@ -1,273 +0,0 @@
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s):    Myk Melez <myk@mozilla.org>
-
-################################################################################
-# Module Initialization
-################################################################################
-
-# Make it harder for us to do dangerous things in Perl.
-use diagnostics;
-use strict;
-
-# Bundle the functions in this file together into the "Token" package.
-package Token;
-
-use Date::Format;
-
-# This module requires that its caller have said "require CGI.pl" to import
-# relevant functions from that script and its companion globals.pl.
-
-################################################################################
-# Constants
-################################################################################
-
-# The maximum number of days a token will remain valid.
-my $maxtokenage = 3;
-
-################################################################################
-# Functions
-################################################################################
-
-sub IssueEmailChangeToken {
-    my ($userid, $old_email, $new_email) = @_;
-
-    my $token_ts = time();
-    my $issuedate = time2str("%Y-%m-%d %H:%M", $token_ts);
-
-    # Generate a unique token and insert it into the tokens table.
-    # We have to lock the tokens table before generating the token, 
-    # since the database must be queried for token uniqueness.
-    &::SendSQL("LOCK TABLES tokens WRITE");
-    my $token = GenerateUniqueToken();
-    my $quotedtoken = &::SqlQuote($token);
-    my $quoted_emails = &::SqlQuote($old_email . ":" . $new_email);
-    &::SendSQL("INSERT INTO tokens ( userid , issuedate , token , 
-                                     tokentype , eventdata )
-                VALUES             ( $userid , '$issuedate' , $quotedtoken , 
-                                     'emailold' , $quoted_emails )");
-    my $newtoken = GenerateUniqueToken();
-    $quotedtoken = &::SqlQuote($newtoken);
-    &::SendSQL("INSERT INTO tokens ( userid , issuedate , token , 
-                                     tokentype , eventdata )
-                VALUES             ( $userid , '$issuedate' , $quotedtoken , 
-                                     'emailnew' , $quoted_emails )");
-    &::SendSQL("UNLOCK TABLES");
-
-    # Mail the user the token along with instructions for using it.
-
-    my $template = $::template;
-    my $vars = $::vars;
-
-    $vars->{'oldemailaddress'} = $old_email . &::Param('emailsuffix');
-    $vars->{'newemailaddress'} = $new_email . &::Param('emailsuffix');
-    
-    $vars->{'max_token_age'} = $maxtokenage;
-    $vars->{'token_ts'} = $token_ts;
-
-    $vars->{'token'} = $token;
-    $vars->{'emailaddress'} = $old_email . &::Param('emailsuffix');
-
-    my $message;
-    $template->process("account/email/change-old.txt.tmpl", $vars, \$message)
-      || &::ThrowTemplateError($template->error());
-
-    open SENDMAIL, "|/usr/lib/sendmail -t -i";
-    print SENDMAIL $message;
-    close SENDMAIL;
-
-    $vars->{'token'} = $newtoken;
-    $vars->{'emailaddress'} = $new_email . &::Param('emailsuffix');
-
-    $message = "";
-    $template->process("account/email/change-new.txt.tmpl", $vars, \$message)
-      || &::ThrowTemplateError($template->error());
-
-    open SENDMAIL, "|/usr/lib/sendmail -t -i";
-    print SENDMAIL $message;
-    close SENDMAIL;
-
-}
-
-sub IssuePasswordToken {
-    # Generates a random token, adds it to the tokens table, and sends it
-    # to the user with instructions for using it to change their password.
-
-    my ($loginname) = @_;
-
-    # Retrieve the user's ID from the database.
-    my $quotedloginname = &::SqlQuote($loginname);
-    &::SendSQL("SELECT userid FROM profiles WHERE login_name = $quotedloginname");
-    my ($userid) = &::FetchSQLData();
-
-    my $token_ts = time();
-    my $issuedate = time2str("%Y-%m-%d %H:%M", $token_ts);
-
-    # Generate a unique token and insert it into the tokens table.
-    # We have to lock the tokens table before generating the token, 
-    # since the database must be queried for token uniqueness.
-    &::SendSQL("LOCK TABLE tokens WRITE") if $::driver eq 'mysql';
-    my $token = GenerateUniqueToken();
-    my $quotedtoken = &::SqlQuote($token);
-    my $quotedipaddr = &::SqlQuote($::ENV{'REMOTE_ADDR'});
-    &::SendSQL("INSERT INTO tokens ( userid , issuedate , token , tokentype , eventdata )
-                VALUES      ( $userid , '$issuedate' , $quotedtoken , 'password' , $quotedipaddr )");
-    &::SendSQL("UNLOCK TABLES") if $::driver eq 'mysql';
-
-    # Mail the user the token along with instructions for using it.
-    
-    my $template = $::template;
-    my $vars = $::vars;
-
-    $vars->{'token'} = $token;
-    $vars->{'emailaddress'} = $loginname . &::Param('emailsuffix');
-
-    $vars->{'max_token_age'} = $maxtokenage;
-    $vars->{'token_ts'} = $token_ts;
-
-    my $message = "";
-    $template->process("account/password/forgotten-password.txt.tmpl", 
-                                                               $vars, \$message)
-      || &::ThrowTemplateError($template->error());
-
-    open SENDMAIL, "|/usr/lib/sendmail -t -i";
-    print SENDMAIL $message;
-    close SENDMAIL;
-
-}
-
-
-sub CleanTokenTable {
-    &::SendSQL("LOCK TABLES tokens WRITE") if $::driver eq 'mysql';
-    if ($::driver eq 'mysql') {
-        &::SendSQL("DELETE FROM tokens WHERE TO_DAYS(NOW()) - TO_DAYS(issuedate) >= " . $maxtokenage);
-    } elsif ($::driver eq 'Pg') {
-        &::SendSQL("DELETE FROM tokens WHERE now() - issuedate >= '$maxtokenage days'");
-    }
-    &::SendSQL("UNLOCK TABLES") if $::driver eq 'mysql';
-}
-
-
-sub GenerateUniqueToken {
-    # Generates a unique random token.  Uses &GenerateRandomPassword 
-    # for the tokens themselves and checks uniqueness by searching for
-    # the token in the "tokens" table.  Gives up if it can't come up
-    # with a token after about one hundred tries.
-
-    my $token;
-    my $duplicate = 1;
-    my $tries = 0;
-    while ($duplicate) {
-
-        ++$tries;
-        if ($tries > 100) {
-            &::DisplayError("Something is seriously wrong with the token generation system.");
-            exit;
-        }
-
-        $token = &::GenerateRandomPassword();
-        &::SendSQL("SELECT userid FROM tokens WHERE token = " . &::SqlQuote($token));
-        $duplicate = &::FetchSQLData();
-    }
-
-    return $token;
-
-}
-
-
-sub Cancel {
-    # Cancels a previously issued token and notifies the system administrator.
-    # This should only happen when the user accidentally makes a token request
-    # or when a malicious hacker makes a token request on behalf of a user.
-    
-    my ($token, $cancelaction) = @_;
-
-    # Quote the token for inclusion in SQL statements.
-    my $quotedtoken = &::SqlQuote($token);
-    
-    # Get information about the token being cancelled.
-    &::SendSQL("SELECT  issuedate , tokentype , eventdata , login_name , realname
-                FROM    tokens, profiles 
-                WHERE   tokens.userid = profiles.userid
-                AND     token = $quotedtoken");
-    my ($issuedate, $tokentype, $eventdata, $loginname, $realname) = &::FetchSQLData();
-
-    # Get the email address of the Bugzilla maintainer.
-    my $maintainer = &::Param('maintainer');
-
-    # Format the user's real name and email address into a single string.
-    my $username = $realname ? $realname . " <" . $loginname . ">" : $loginname;
-
-    my $template = $::template;
-    my $vars = $::vars;
-
-    $vars->{'emailaddress'} = $username;
-    $vars->{'maintainer'} = $maintainer;
-    $vars->{'remoteaddress'} = $::ENV{'REMOTE_ADDR'};
-    $vars->{'token'} = $token;
-    $vars->{'tokentype'} = $tokentype;
-    $vars->{'issuedate'} = $issuedate;
-    $vars->{'eventdata'} = $eventdata;
-    $vars->{'cancelaction'} = $cancelaction;
-
-    # Notify the user via email about the cancellation.
-
-    my $message;
-    $template->process("account/cancel-token.txt.tmpl", $vars, \$message)
-      || &::ThrowTemplateError($template->error());
-
-    open SENDMAIL, "|/usr/lib/sendmail -t -i";
-    print SENDMAIL $message;
-    close SENDMAIL;
-
-    # Delete the token from the database.
-    &::SendSQL("LOCK TABLE tokens WRITE") if $::driver eq 'mysql';
-    &::SendSQL("DELETE FROM tokens WHERE token = $quotedtoken");
-    &::SendSQL("UNLOCK TABLES") if $::driver eq 'mysql';
-}
-
-sub HasPasswordToken {
-    # Returns a password token if the user has one.
-    
-    my ($userid) = @_;
-    
-    &::SendSQL("SELECT token FROM tokens 
-                WHERE userid = $userid AND tokentype = 'password' LIMIT 1");
-    my ($token) = &::FetchSQLData();
-    
-    return $token;
-}
-
-sub HasEmailChangeToken {
-    # Returns an email change token if the user has one. 
-    
-    my ($userid) = @_;
-    
-    &::SendSQL("SELECT token FROM tokens 
-                 WHERE userid = $userid 
-                   AND tokentype = 'emailnew' 
-                    OR tokentype = 'emailold' LIMIT 1");
-    my ($token) = &::FetchSQLData();
-    
-    return $token;
-}
-
-
-1;

mozilla/webtools/bugzilla/UPGRADING

@@ -1,3 +0,0 @@
-Please consult The Bugzilla Guide for instructions on how to upgrade
-Bugzilla from an older version.  The Guide can be found with this
-distribution, in docs/html, docs/txt, and docs/sgml.

mozilla/webtools/bugzilla/UPGRADING-pre-2.8

@@ -1,407 +0,0 @@
-This file contains only important changes made to Bugzilla before release
-2.8.  If you are upgrading from version older than 2.8, please read this file.
-If you are upgrading from 2.8 or newer, please read the Installation and
-Upgrade instructions in The Bugzilla Guide, found with this distribution in
-docs/html, docs/txt, and docs/sgml.
-
-For a complete list of what changes, use Bonsai
-(http://cvs-mirror.mozilla.org/webtools/bonsai/cvsqueryform.cgi) to
-query the CVS tree.  For example,
-
-    http://cvs-mirror.mozilla.org/webtools/bonsai/cvsquery.cgi?module=all&branch=HEAD&branchtype=match&dir=mozilla%2Fwebtools%2Fbugzilla&file=&filetype=match&who=&whotype=match&sortby=Date&hours=2&date=week&mindate=&maxdate=&cvsroot=%2Fcvsroot 
-
-will tell you what has been changed in the last week.
-
-
-10/12/99 The CHANGES file is now obsolete!  There is a new file called
-checksetup.pl.  You should get in the habit of running that file every time
-you update your installation of Bugzilla.  That file will be constantly 
-updated to automatically update your installation to match any code changes.
-If you're curious as to what is going on, changes are commented in that file, 
-at the end.
-
-Many thanks to Holger Schurig <holgerschurig@nikocity.de> for writing this
-script!
-
-
-
-10/11/99 Restructured voting database to add a cached value in each
-bug recording how many total votes that bug has.  While I'm at it, I
-removed the unused "area" field from the bugs database.  It is
-distressing to realize that the bugs table has reached the maximum
-number of indices allowed by MySQL (16), which may make future
-enhancements awkward.
-
-You must feed the following to MySQL:
-
-	alter table bugs drop column area;
-	alter table bugs add column votes mediumint not null, add index (votes);
-
-You then *must* delete the data/versioncache file when you make this
-change, as it contains references to the "area" field.  Deleting it is safe,
-bugzilla will correctly regenerate it.
-
-If you have been using the voting feature at all, then you will then
-need to update the voting cache.  You can do this by visiting the
-sanitycheck.cgi page, and taking it up on its offer to rebuild the
-votes stuff.
-
-
-10/7/99 Added voting ability.  You must run the new script
-"makevotestable.sh".  You must also feed the following to mysql:
-
-	alter table products add column votesperuser smallint not null;
-
-
-
-9/15/99 Apparently, newer alphas of MySQL won't allow you to have
-"when" as a column name.  So, I have had to rename a column in the
-bugs_activity table.  You must feed the below to mysql or you won't
-work at all.
-
-	alter table bugs_activity change column when bug_when datetime not null;
-
-
-8/16/99 Added "OpenVMS" to the list of OS's. Feed this to mysql:
-
-	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "Mac System 8.6", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "FreeBSD", "OSF/1", "Solaris", "SunOS", "Neutrino", "OS/2", "BeOS", "OpenVMS", "other") not null;
-
-6/22/99 Added an entry to the attachments table to record who the submitter
-was.  Nothing uses this yet, but it still should be recorded.
-
-	alter table attachments add column submitter_id mediumint not null;
-
-You should also run this script to populate the new field:
-
-#!/usr/bonsaitools/bin/perl -w
-use diagnostics;
-use strict;
-require "globals.pl";
-$|=1;
-ConnectToDatabase();
-SendSQL("select bug_id, attach_id from attachments order by bug_id");
-my @list;
-while (MoreSQLData()) {
-    my @row = FetchSQLData();
-    push(@list, \@row);
-}
-foreach my $ref (@list) {
-    my ($bug, $attach) = (@$ref);
-    SendSQL("select long_desc from bugs where bug_id = $bug");
-    my $comment = FetchOneColumn() . "Created an attachment (id=$attach)";
-
-    if ($comment =~ m@-* Additional Comments From ([^ ]*)[- 0-9/:]*\nCreated an attachment \(id=$attach\)@) {
-	print "Found $1\n";
-	SendSQL("select userid from profiles where login_name=" .
-		SqlQuote($1));
-	my $userid = FetchOneColumn();
-	if (defined $userid && $userid > 0) {
-	    SendSQL("update attachments set submitter_id=$userid where attach_id = $attach");
-	}
-    } else {
-	print "Bug $bug can't find comment for attachment $attach\n";
-    }
-}
-
-
-
-
-
-
-6/14/99 Added "BeOS" to the list of OS's. Feed this to mysql:
-
-	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "Mac System 8.6", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "FreeBSD", "OSF/1", "Solaris", "SunOS", "Neutrino", "OS/2", "BeOS", "other") not null;
-
-
-5/27/99 Added support for dependency information.  You must run the new
-"makedependenciestable.sh" script.  You can turn off dependencies with the new
-"usedependencies" param, but it defaults to being on.  Also, read very
-carefully the description for the new "webdotbase" param; you will almost
-certainly need to tweak it.
-
-
-5/24/99 Added "Mac System 8.6" and "Neutrino" to the list of OS's.
-Feed this to mysql:
-
-	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "Mac System 8.6", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "FreeBSD", "OSF/1", "Solaris", "SunOS", "Neutrino", "OS/2", "other") not null;
-
-
-5/12/99 Added a pref to control how much email you get.  This needs a new
-column in the profiles table, so feed the following to mysql:
-
-	alter table profiles add column emailnotification enum("ExcludeSelfChanges", "CConly", "All") not null default "ExcludeSelfChanges";
-
-5/5/99 Added the ability to search by creation date.  To make this perform
-well, you ought to do the following:
-
-	alter table bugs change column creation_ts creation_ts datetime not null, add index (creation_ts);
-
-
-4/30/99 Added a new severity, "blocker".  To get this into your running
-Bugzilla, do the following:
-
-	alter table bugs change column bug_severity bug_severity enum("blocker", "critical", "major", "normal", "minor", "trivial", "enhancement") not null;
-
-
-4/22/99 There was a bug where the long descriptions of bugs had a variety of
-newline characters at the end, depending on the operating system of the browser
-that submitted the text.  This bug has been fixed, so that no further changes
-like that will happen.  But to fix problems that have already crept into your
-database, you can run the following perl script (which is slow and ugly, but
-does work:)
-#!/usr/bonsaitools/bin/perl -w
-use diagnostics;
-use strict;
-require "globals.pl";
-$|=1;
-ConnectToDatabase();
-SendSQL("select bug_id from bugs order by bug_id");
-my @list;
-while (MoreSQLData()) {
-    push(@list, FetchOneColumn());
-}
-foreach my $id (@list) {
-    if ($id % 50 == 0) {
-	print "\n$id ";
-    }
-    SendSQL("select long_desc from bugs where bug_id = $id");
-    my $comment = FetchOneColumn();
-    my $orig = $comment;
-    $comment =~ s/\r\n/\n/g;     # Get rid of windows-style line endings.
-    $comment =~ s/\r/\n/g;       # Get rid of mac-style line endings.
-    if ($comment ne $orig) {
-	SendSQL("update bugs set long_desc = " . SqlQuote($comment) .
-		" where bug_id = $id");
-	print ".";
-    } else {
-	print "-";
-    }
-}
-
-
-
-4/8/99 Added ability to store patches with bugs.  This requires a new table
-to store the data, so you will need to run the "makeattachmenttable.sh" script.
-
-3/25/99 Unfortunately, the HTML::FromText CPAN module had too many bugs, and
-so I had to roll my own.  We no longer use the HTML::FromText CPAN module.
-
-3/24/99 (This entry has been removed.  It used to say that we required the
-HTML::FromText CPAN module, but that's no longer true.)
-
-3/22/99 Added the ability to query by fields which have changed within a date
-range.  To make this perform a bit better, we need a new index:
-
-	alter table bugs_activity add index (field);
-
-3/10/99 Added 'groups' stuff, where we have different group bits that we can
-put on a person or on a bug.  Some of the group bits control access to bugzilla
-features.  And a person can't access a bug unless he has every group bit set
-that is also set on the bug.  See the comments in makegroupstable.sh for a bit
-more info.
-
-The 'maintainer' param is now used only as an email address for people to send
-complaints to.  The groups table is what is now used to determine permissions.
-
-You will need to run the new script "makegroupstable.sh".  And then you need to
-feed the following lines to MySQL (replace XXX with the login name of the
-maintainer, the person you wish to be all-powerful).
-
-	alter table bugs add column groupset bigint not null;
-	alter table profiles add column groupset bigint not null;
-	update profiles set groupset=0x7fffffffffffffff where login_name = XXX;
-
-
-
-3/8/99 Added params to control how priorities are set in a new bug.  You can
-now choose whether to let submitters of new bugs choose a priority, or whether
-they should just accept the default priority (which is now no longer hardcoded
-to "P2", but is instead a param.)  The default value of the params will cause
-the same behavior as before.
-
-3/3/99 Added a "disallownew" field to the products table.  If non-zero, then
-don't let people file new bugs against this product.  (This is for when a 
-product is retired, but you want to keep the bug reports around for posterity.)
-Feed this to MySQL:
-
-	alter table products add column disallownew tinyint not null;
-
-
-2/8/99 Added FreeBSD to the list of OS's.  Feed this to MySQL:
-
-	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "FreeBSD", "OSF/1", "Solaris", "SunOS", "OS/2", "other") not null;
-
-
-2/4/99 Added a new column "description" to the components table, and added 
-links to a new page which will use this to describe the components of a 
-given product.  Feed this to MySQL:
-
-	alter table components add column description mediumtext not null;
-
-
-2/3/99 Added a new column "initialqacontact" to the components table that gives
-an initial QA contact field.  It may be empty if you wish the initial qa
-contact to be empty.  If you're not using the QA contact field, you don't need
-to add this column, but you might as well be safe and add it anyway:
-
-	alter table components add column initialqacontact tinytext not null;
-
-
-2/2/99 Added a new column "milestoneurl" to the products table that gives a URL
-which is to describe the currently defined milestones for a product.  If you
-don't use target milestone, you might be able to get away without adding this
-column, but you might as well be safe and add it anyway:
-
-	alter table products add column milestoneurl tinytext not null;
-
-
-1/29/99 Whoops; had a misspelled op_sys.  It was "Mac System 7.1.6"; it should
-be "Mac System 7.6.1".  It turns out I had no bugs with this value set, so I
-could just do the below simple command.  If you have bugs with this value, you
-may need to do something more complicated.
-
-	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "OSF/1", "Solaris", "SunOS", "OS/2", "other") not null;
-
-
-
-1/20/99 Added new fields: Target Milestone, QA Contact, and Status Whiteboard.
-These fields are all optional in the UI; there are parameters to turn them on.
-However, whether or not you use them, the fields need to be in the DB.  There
-is some code that needs them, even if you don't.
-
-To update your DB to have these fields, send the following to MySQL:
-
-        alter table bugs add column target_milestone varchar(20) not null,
-                add column qa_contact mediumint not null,
-                add column status_whiteboard mediumtext not null,
-                add index (target_milestone), add index (qa_contact);
-
-
-
-1/18/99 You can now query by CC.  To make this perform reasonably, the CC table
-needs some indices.  The following MySQL does the necessary stuff:
-
-	alter table cc add index (bug_id), add index (who);
-
-
-1/15/99 The op_sys field can now be queried by (and more easily tweaked).
-To make this perform reasonably, it needs an index.  The following MySQL 
-command will create the necessary index:
-
-	alter table bugs add index (op_sys);
-
-
-12/2/98 The op_sys and rep_platform fields have been tweaked.  op_sys
-is now an enum, rather than having the legal values all hard-coded in
-perl.  rep_platform now no longer allows a value of "X-Windows".
-
-Here's how I ported to the new world.  This ought to work for you too.
-Actually, it's probably overkill.  I had a lot of illegal values for op_sys
-in my tables, from importing bugs from strange places.  If you haven't done 
-anything funky, then much of the below will be a no-op.
-
-First, send the following commands to MySQL to make sure all your values for
-rep_platform and op_sys are legal in the new world..
-
-	update bugs set rep_platform="Sun" where rep_platform="X-Windows" and op_sys like "Solaris%";
-	update bugs set rep_platform="SGI" where rep_platform="X-Windows" and op_sys = "IRIX";
-	update bugs set rep_platform="SGI" where rep_platform="X-Windows" and op_sys = "HP-UX";
-	update bugs set rep_platform="DEC" where rep_platform="X-Windows" and op_sys = "OSF/1";
-	update bugs set rep_platform="PC" where rep_platform="X-Windows" and op_sys = "Linux";
-	update bugs set rep_platform="other" where rep_platform="X-Windows";
-	update bugs set rep_platform="other" where rep_platform="";
-	update bugs set op_sys="Mac System 7" where op_sys="System 7";
-	update bugs set op_sys="Mac System 7.5" where op_sys="System 7.5";
-	update bugs set op_sys="Mac System 8.0" where op_sys="8.0";
-	update bugs set op_sys="OSF/1" where op_sys="Digital Unix 4.0";
-	update bugs set op_sys="IRIX" where op_sys like "IRIX %";
-	update bugs set op_sys="HP-UX" where op_sys like "HP-UX %";
-	update bugs set op_sys="Windows NT" where op_sys like "NT %";
-	update bugs set op_sys="OSF/1" where op_sys like "OSF/1 %";
-	update bugs set op_sys="Solaris" where op_sys like "Solaris %";
-	update bugs set op_sys="SunOS" where op_sys like "SunOS%";
-	update bugs set op_sys="other" where op_sys = "Motif";
-	update bugs set op_sys="other" where op_sys = "Other";
-
-Next, send the following commands to make sure you now have only legal
-entries in your table.  If either of the queries do not come up empty, then
-you have to do more stuff like the above.
-
-	select bug_id,op_sys,rep_platform from bugs where rep_platform not regexp "^(All|DEC|HP|Macintosh|PC|SGI|Sun|X-Windows|Other)$";
-	select bug_id,op_sys,rep_platform from bugs where op_sys not regexp "^(All|Windows 3.1|Windows 95|Windows 98|Windows NT|Mac System 7|Mac System 7.5|Mac System 7.1.6|Mac System 8.0|AIX|BSDI|HP-UX|IRIX|Linux|OSF/1|Solaris|SunOS|other)$";
-
-Finally, once that's all clear, alter the table to make enforce the new legal
-entries:
-
-	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.1.6", "Mac System 8.0", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "OSF/1", "Solaris", "SunOS", "other") not null, change column rep_platform rep_platform enum("All", "DEC", "HP", "Macintosh", "PC", "SGI", "Sun", "Other");
-
-
-
-
-
-11/20/98 Added searching of CC field.  To better support this, added
-some indexes to the CC table.  You probably want to execute the following
-mysql commands:
-
-	alter table cc add index (bug_id);
-	alter table cc add index (who);
-
-
-10/27/98 security check for legal products in place. bug charts are not
-available as an option if collectstats.pl has never been run. all products 
-get daily stats collected now. README updated: Chart::Base is listed as
-a requirement, instructions for using collectstats.pl included as 
-an optional step. also got silly and added optional quips to bug
-reports. 
-
-10/17/98 modified README installation instructions slightly. 
-
-10/7/98 Added a new table called "products".  Right now, this is used
-only to have a description for each product, and that description is
-only used when initially adding a new bug.  Anyway, you *must* create
-the new table (which you can do by running the new makeproducttable.sh
-script).  If you just leave it empty, things will work much as they
-did before, or you can add descriptions for some or all of your
-products.
-
-
-9/15/98 Everything has been ported to Perl.  NO MORE TCL.  This
-transition should be relatively painless, except for the "params"
-file.  This is the file that contains parameters you've set up on the
-editparams.cgi page.  Before changing to Perl, this was a tcl-syntax
-file, stored in the same directory as the code; after the change to
-Perl, it becomes a perl-syntax file, stored in a subdirectory named
-"data".  See the README file for more details on what version of Perl
-you need.
-
-So, if updating from an older version of Bugzilla, you will need to
-edit data/param, change the email address listed for
-$::param{'maintainer'}, and then go revisit the editparams.cgi page
-and reset all the parameters to your taste.  Fortunately, your old
-params file will still be around, and so you ought to be able to
-cut&paste important bits from there.
-
-Also, note that the "whineatnews" script has changed name (it now has
-an extension of .pl instead of .tcl), so you'll need to change your
-cron job.
-
-And the "comments" file has been moved to the data directory.  Just do
-"cat comments >> data/comments" to restore any old comments that may
-have been lost.
-
-
-
-9/2/98 Changed the way password validation works.  We now keep a
-crypt'd version of the password in the database, and check against
-that.  (This is silly, because we're also keeping the plaintext
-version there, but I have plans...)  Stop passing the plaintext
-password around as a cookie; instead, we have a cookie that references
-a record in a new database table, logincookies.
-
-IMPORTANT: if updating from an older version of Bugzilla, you must run
-the following commands to keep things working:
-
- ./makelogincookiestable.sh
- echo "alter table profiles add column cryptpassword varchar(64);" | mysql bugs
- echo "update profiles set cryptpassword = encrypt(password,substring(rand(),3, 4));" | mysql bugs
-

mozilla/webtools/bugzilla/attachment.cgi

@@ -1,792 +0,0 @@
-#!/usr/bonsaitools/bin/perl -wT
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-#                 Myk Melez <myk@mozilla.org>
-
-################################################################################
-# Script Initialization
-################################################################################
-
-# Make it harder for us to do dangerous things in Perl.
-use diagnostics;
-use strict;
-
-use lib qw(.);
-
-use vars qw(
-  $template
-  $vars
-);
-
-# Include the Bugzilla CGI and general utility library.
-require "CGI.pl";
-
-# Establish a connection to the database backend.
-ConnectToDatabase();
-
-# Check whether or not the user is logged in and, if so, set the $::userid 
-# and $::usergroupset variables.
-quietly_check_login();
-
-################################################################################
-# Main Body Execution
-################################################################################
-
-# All calls to this script should contain an "action" variable whose value
-# determines what the user wants to do.  The code below checks the value of
-# that variable and runs the appropriate code.
-
-# Determine whether to use the action specified by the user or the default.
-my $action = $::FORM{'action'} || 'view';
-
-if ($action eq "view")  
-{ 
-  validateID();
-  view(); 
-}
-elsif ($action eq "viewall") 
-{ 
-  ValidateBugID($::FORM{'bugid'});
-  viewall(); 
-}
-elsif ($action eq "enter") 
-{ 
-  confirm_login();
-  ValidateBugID($::FORM{'bugid'});
-  enter(); 
-}
-elsif ($action eq "insert")
-{
-  confirm_login();
-  ValidateBugID($::FORM{'bugid'});
-  ValidateComment($::FORM{'comment'});
-  validateFilename();
-  validateData();
-  validateDescription();
-  validateIsPatch();
-  validateContentType() unless $::FORM{'ispatch'};
-  validateObsolete() if $::FORM{'obsolete'};
-  insert();
-}
-elsif ($action eq "edit") 
-{ 
-  quietly_check_login();
-  validateID();
-  validateCanEdit($::FORM{'id'});
-  edit(); 
-}
-elsif ($action eq "update") 
-{ 
-  confirm_login();
-  ValidateComment($::FORM{'comment'});
-  validateID();
-  validateCanEdit($::FORM{'id'});
-  validateDescription();
-  validateIsPatch();
-  validateContentType() unless $::FORM{'ispatch'};
-  validateIsObsolete();
-  validateStatuses();
-  update();
-}
-else 
-{ 
-  DisplayError("I could not figure out what you wanted to do.")
-}
-
-exit;
-
-################################################################################
-# Data Validation / Security Authorization
-################################################################################
-
-sub validateID
-{
-  # Validate the value of the "id" form field, which must contain an
-  # integer that is the ID of an existing attachment.
-
-  detaint_natural($::FORM{'id'})
-    || DisplayError("You did not enter a valid attachment number.") 
-      && exit;
-  
-  # Make sure the attachment exists in the database.
-  SendSQL("SELECT bug_id FROM attachments WHERE attach_id = $::FORM{'id'}");
-  MoreSQLData()
-    || DisplayError("Attachment #$::FORM{'id'} does not exist.") 
-    && exit;
-
-  # Make sure the user is authorized to access this attachment's bug.
-  my ($bugid) = FetchSQLData();
-  ValidateBugID($bugid);
-}
-
-sub validateCanEdit
-{
-    my ($attach_id) = (@_);
-
-    # If the user is not logged in, claim that they can edit. This allows
-    # the edit scrren to be displayed to people who aren't logged in.
-    # People not logged in can't actually commit changes, because that code
-    # calls confirm_login, not quietly_check_login, before calling this sub
-    return if $::userid == 0;
-
-    # People in editbugs can edit all attachments
-    return if UserInGroup("editbugs");
-
-    # Bug 97729 - the submitter can edit their attachments
-    SendSQL("SELECT attach_id FROM attachments WHERE " .
-            "attach_id = $attach_id AND submitter_id = $::userid");
-
-    FetchSQLData()
-      || DisplayError("You are not authorised to edit attachment #$attach_id")
-      && exit;
-}
-
-sub validateDescription
-{
-  $::FORM{'description'}
-    || DisplayError("You must enter a description for the attachment.")
-      && exit;
-}
-
-sub validateIsPatch
-{
-  # Set the ispatch flag to zero if it is undefined, since the UI uses
-  # an HTML checkbox to represent this flag, and unchecked HTML checkboxes
-  # do not get sent in HTML requests.
-  $::FORM{'ispatch'} = $::FORM{'ispatch'} ? 1 : 0;
-
-  # Set the content type to text/plain if the attachment is a patch.
-  $::FORM{'contenttype'} = "text/plain" if $::FORM{'ispatch'};
-}
-
-sub validateContentType
-{
-  if (!$::FORM{'contenttypemethod'})
-  {
-    DisplayError("You must choose a method for determining the content type,
-      either <em>auto-detect</em>, <em>select from list</em>, or <em>enter 
-      manually</em>.");
-    exit;
-  }
-  elsif ($::FORM{'contenttypemethod'} eq 'autodetect')
-  {
-    # The user asked us to auto-detect the content type, so use the type
-    # specified in the HTTP request headers.
-    if ( !$::FILE{'data'}->{'contenttype'} )
-    {
-      DisplayError("You asked Bugzilla to auto-detect the content type, but
-        your browser did not specify a content type when uploading the file, 
-        so you must enter a content type manually.");
-      exit;
-    }
-    $::FORM{'contenttype'} = $::FILE{'data'}->{'contenttype'};
-  }
-  elsif ($::FORM{'contenttypemethod'} eq 'list')
-  {
-    # The user selected a content type from the list, so use their selection.
-    $::FORM{'contenttype'} = $::FORM{'contenttypeselection'};
-  }
-  elsif ($::FORM{'contenttypemethod'} eq 'manual')
-  {
-    # The user entered a content type manually, so use their entry.
-    $::FORM{'contenttype'} = $::FORM{'contenttypeentry'};
-  }
-  else
-  {
-    my $htmlcontenttypemethod = html_quote($::FORM{'contenttypemethod'});
-    DisplayError("Your form submission got corrupted somehow.  The <em>content
-      method</em> field, which specifies how the content type gets determined,
-      should have been either <em>autodetect</em>, <em>list</em>, 
-      or <em>manual</em>, but was instead <em>$htmlcontenttypemethod</em>.");
-    exit;
-  }
-
-  if ( $::FORM{'contenttype'} !~ /^(application|audio|image|message|model|multipart|text|video)\/.+$/ )
-  {
-    my $htmlcontenttype = html_quote($::FORM{'contenttype'});
-    DisplayError("The content type <em>$htmlcontenttype</em> is invalid.
-      Valid types must be of the form <em>foo/bar</em> where <em>foo</em> 
-      is either <em>application, audio, image, message, model, multipart, 
-      text,</em> or <em>video</em>.");
-    exit;
-  }
-}
-
-sub validateIsObsolete
-{
-  # Set the isobsolete flag to zero if it is undefined, since the UI uses
-  # an HTML checkbox to represent this flag, and unchecked HTML checkboxes
-  # do not get sent in HTML requests.
-  $::FORM{'isobsolete'} = $::FORM{'isobsolete'} ? 1 : 0;
-}
-
-sub validateStatuses
-{
-  # Get a list of attachment statuses that are valid for this attachment.
-  PushGlobalSQLState();
-  SendSQL("SELECT  attachstatusdefs.id
-           FROM    attachments, bugs, attachstatusdefs
-           WHERE   attachments.attach_id = $::FORM{'id'}
-           AND     attachments.bug_id = bugs.bug_id
-           AND     attachstatusdefs.product = bugs.product");
-  my @statusdefs;
-  push(@statusdefs, FetchSQLData()) while MoreSQLData();
-  PopGlobalSQLState();
-  
-  foreach my $status (@{$::MFORM{'status'}})
-  {
-    grep($_ == $status, @statusdefs)
-      || DisplayError("One of the statuses you entered is not a valid status
-                       for this attachment.")
-        && exit;
-    # We have tested that the status is valid, so it can be detainted
-    detaint_natural($status);
-  }
-}
-
-sub validateData
-{
-  $::FORM{'data'}
-    || DisplayError("The file you are trying to attach is empty!")
-      && exit;
-
-  my $len = length($::FORM{'data'});
-
-  my $maxpatchsize = Param('maxpatchsize');
-  my $maxattachmentsize = Param('maxattachmentsize');
-  
-  # Makes sure the attachment does not exceed either the "maxpatchsize" or 
-  # the "maxattachmentsize" parameter.
-  if ( $::FORM{'ispatch'} && $maxpatchsize && $len > $maxpatchsize*1024 )
-  {
-    my $lenkb = sprintf("%.0f", $len/1024);
-    DisplayError("The file you are trying to attach is ${lenkb} kilobytes (KB) in size.  
-                  Patches cannot be more than ${maxpatchsize}KB in size.
-                  Try breaking your patch into several pieces.");
-    exit;
-  } elsif ( !$::FORM{'ispatch'} && $maxattachmentsize && $len > $maxattachmentsize*1024 ) {
-    my $lenkb = sprintf("%.0f", $len/1024);
-    DisplayError("The file you are trying to attach is ${lenkb} kilobytes (KB) in size.  
-                  Non-patch attachments cannot be more than ${maxattachmentsize}KB.
-                  If your attachment is an image, try converting it to a compressable
-                  format like JPG or PNG, or put it elsewhere on the web and
-                  link to it from the bug's URL field or in a comment on the bug.");
-    exit;
-  }
-}
-
-sub validateFilename
-{
-  defined $::FILE{'data'}
-    || DisplayError("You did not specify a file to attach.")
-      && exit;
-}
-
-sub validateObsolete
-{
-  # Make sure the attachment id is valid and the user has permissions to view
-  # the bug to which it is attached.
-  foreach my $attachid (@{$::MFORM{'obsolete'}}) {
-    detaint_natural($attachid)
-      || DisplayError("The attachment number of one of the attachments 
-           you wanted to obsolete is invalid.") 
-        && exit;
-  
-    SendSQL("SELECT bug_id, isobsolete, description 
-             FROM attachments WHERE attach_id = $attachid");
-
-    # Make sure the attachment exists in the database.
-    MoreSQLData()
-      || DisplayError("Attachment #$attachid does not exist.") 
-        && exit;
-
-    my ($bugid, $isobsolete, $description) = FetchSQLData();
-
-    if ($bugid != $::FORM{'bugid'})
-    {
-      $description = html_quote($description);
-      DisplayError("Attachment #$attachid ($description) is attached 
-        to bug #$bugid, but you tried to flag it as obsolete while
-        creating a new attachment to bug #$::FORM{'bugid'}.");
-      exit;
-    }
-
-    if ( $isobsolete )
-    {
-      $description = html_quote($description);
-      DisplayError("Attachment #$attachid ($description) is already obsolete.");
-      exit;
-    }
-
-    # Check that the user can modify this attachment
-    validateCanEdit($attachid);
-  }
-
-}
-
-################################################################################
-# Functions
-################################################################################
-
-sub view
-{
-  # Display an attachment.
-
-  # Retrieve the attachment content and its content type from the database.
-  SendSQL("SELECT mimetype, thedata FROM attachments WHERE attach_id = $::FORM{'id'}");
-  my ($contenttype, $thedata) = FetchSQLData();
-    
-  # Return the appropriate HTTP response headers.
-  print "Content-Type: $contenttype\n\n";
-
-  print $thedata;
-}
-
-
-sub viewall
-{
-  # Display all attachments for a given bug in a series of IFRAMEs within one HTML page.
-
-  # Retrieve the attachments from the database and write them into an array
-  # of hashes where each hash represents one attachment.
-  SendSQL("SELECT attach_id, creation_ts, mimetype, description, ispatch, isobsolete 
-           FROM attachments WHERE bug_id = $::FORM{'bugid'} ORDER BY attach_id");
-  my @attachments; # the attachments array
-  while (MoreSQLData())
-  {
-    my %a; # the attachment hash
-    ($a{'attachid'}, $a{'date'}, $a{'contenttype'}, 
-     $a{'description'}, $a{'ispatch'}, $a{'isobsolete'}) = FetchSQLData();
-
-    # Format the attachment's creation/modification date into something readable.
-    if ($a{'date'} =~ /^(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)$/) {
-        $a{'date'} = "$3/$4/$2&nbsp;$5:$6";
-    }
-
-    # Flag attachments as to whether or not they can be viewed (as opposed to
-    # being downloaded).  Currently I decide they are viewable if their MIME type 
-    # is either text/*, image/*, or application/vnd.mozilla.*.
-    # !!! Yuck, what an ugly hack.  Fix it!
-    $a{'isviewable'} = ( $a{'contenttype'} =~ /^(text|image|application\/vnd\.mozilla\.)/ );
-
-    # Retrieve a list of status flags that have been set on the attachment.
-    PushGlobalSQLState();
-    SendSQL("SELECT    name 
-             FROM      attachstatuses, attachstatusdefs 
-             WHERE     attach_id = $a{'attachid'} 
-             AND       attachstatuses.statusid = attachstatusdefs.id
-             ORDER BY  sortkey");
-    my @statuses;
-    push(@statuses, FetchSQLData()) while MoreSQLData();
-    $a{'statuses'} = \@statuses;
-    PopGlobalSQLState();
-
-    # Add the hash representing the attachment to the array of attachments.
-    push @attachments, \%a;
-  }
-
-  # Retrieve the bug summary for displaying on screen.
-  SendSQL("SELECT short_desc FROM bugs WHERE bug_id = $::FORM{'bugid'}");
-  my ($bugsummary) = FetchSQLData();
-
-  # Define the variables and functions that will be passed to the UI template.
-  $vars->{'bugid'} = $::FORM{'bugid'};
-  $vars->{'bugsummary'} = $bugsummary;
-  $vars->{'attachments'} = \@attachments;
-
-  # Return the appropriate HTTP response headers.
-  print "Content-Type: text/html\n\n";
-
-  # Generate and return the UI (HTML page) from the appropriate template.
-  $template->process("attachment/show-multiple.html.tmpl", $vars)
-    || ThrowTemplateError($template->error());
-}
-
-
-sub enter
-{
-  # Display a form for entering a new attachment.
-
-  # Retrieve the attachments the user can edit from the database and write
-  # them into an array of hashes where each hash represents one attachment.
-  my $canEdit = "";
-  if (!UserInGroup("editbugs")) {
-      $canEdit = "AND submitter_id = $::userid";
-  }
-  SendSQL("SELECT attach_id, description 
-           FROM attachments
-           WHERE bug_id = $::FORM{'bugid'}
-           AND isobsolete = 0 $canEdit
-           ORDER BY attach_id");
-  my @attachments; # the attachments array
-  while ( MoreSQLData() ) {
-    my %a; # the attachment hash
-    ($a{'id'}, $a{'description'}) = FetchSQLData();
-
-    # Add the hash representing the attachment to the array of attachments.
-    push @attachments, \%a;
-  }
-
-  # Retrieve the bug summary for displaying on screen.
-  SendSQL("SELECT short_desc FROM bugs WHERE bug_id = $::FORM{'bugid'}");
-  my ($bugsummary) = FetchSQLData();
-
-  # Define the variables and functions that will be passed to the UI template.
-  $vars->{'bugid'} = $::FORM{'bugid'};
-  $vars->{'bugsummary'} = $bugsummary;
-  $vars->{'attachments'} = \@attachments;
-
-  # Return the appropriate HTTP response headers.
-  print "Content-Type: text/html\n\n";
-
-  # Generate and return the UI (HTML page) from the appropriate template.
-  $template->process("attachment/create.html.tmpl", $vars)
-    || ThrowTemplateError($template->error());
-}
-
-
-sub insert
-{
-  # Insert a new attachment into the database.
-
-  # Escape characters in strings that will be used in SQL statements.
-  my $filename = SqlQuote($::FILE{'data'}->{'filename'});
-  my $description = SqlQuote($::FORM{'description'});
-  my $contenttype = SqlQuote($::FORM{'contenttype'});
-  my $thedata = SqlQuote($::FORM{'data'});
-
-  # Insert the attachment into the database.
-  SendSQL("INSERT INTO attachments (bug_id, filename, description, mimetype, ispatch, submitter_id, thedata) 
-           VALUES ($::FORM{'bugid'}, $filename, $description, $contenttype, $::FORM{'ispatch'}, $::userid, $thedata)");
-
-  # Retrieve the ID of the newly created attachment record.
-  SendSQL("SELECT LAST_INSERT_ID()");
-  my $attachid = FetchOneColumn();
-
-  # Insert a comment about the new attachment into the database.
-  my $comment = "Created an attachment (id=$attachid)\n$::FORM{'description'}\n";
-  $comment .= ("\n" . $::FORM{'comment'}) if $::FORM{'comment'};
-
-  use Text::Wrap;
-  $Text::Wrap::columns = 80;
-  $Text::Wrap::huge = 'overflow';
-  $comment = Text::Wrap::wrap('', '', $comment);
-
-  AppendComment($::FORM{'bugid'}, 
-                $::COOKIE{"Bugzilla_login"},
-                $comment);
-
-  # Make existing attachments obsolete.
-  my $fieldid = GetFieldID('attachments.isobsolete');
-  foreach my $attachid (@{$::MFORM{'obsolete'}}) {
-    SendSQL("UPDATE attachments SET isobsolete = 1 WHERE attach_id = $attachid");
-    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
-             VALUES ($::FORM{'bugid'}, $attachid, $::userid, NOW(), $fieldid, '0', '1')");
-  }
-
-  # Send mail to let people know the attachment has been created.  Uses a 
-  # special syntax of the "open" and "exec" commands to capture the output of 
-  # "processmail", which "system" doesn't allow, without running the command 
-  # through a shell, which backticks (``) do.
-  #system ("./processmail", $bugid , $::userid);
-  #my $mailresults = `./processmail $bugid $::userid`;
-  my $mailresults = '';
-  open(PMAIL, "-|") or exec('./processmail', $::FORM{'bugid'}, $::COOKIE{'Bugzilla_login'});
-  $mailresults .= $_ while <PMAIL>;
-  close(PMAIL);
- 
-  # Define the variables and functions that will be passed to the UI template.
-  $vars->{'bugid'} = $::FORM{'bugid'};
-  $vars->{'attachid'} = $attachid;
-  $vars->{'description'} = $description;
-  $vars->{'mailresults'} = $mailresults;
-  $vars->{'contenttypemethod'} = $::FORM{'contenttypemethod'};
-  $vars->{'contenttype'} = $::FORM{'contenttype'};
-
-  # Return the appropriate HTTP response headers.
-  print "Content-Type: text/html\n\n";
-
-  # Generate and return the UI (HTML page) from the appropriate template.
-  $template->process("attachment/created.html.tmpl", $vars)
-    || ThrowTemplateError($template->error());
-}
-
-
-sub edit
-{
-  # Edit an attachment record.  Users with "editbugs" privileges, (or the 
-  # original attachment's submitter) can edit the attachment's description,
-  # content type, ispatch and isobsolete flags, and statuses, and they can
-  # also submit a comment that appears in the bug.
-  # Users cannot edit the content of the attachment itself.
-
-  # Retrieve the attachment from the database.
-  SendSQL("SELECT description, mimetype, bug_id, ispatch, isobsolete 
-           FROM attachments WHERE attach_id = $::FORM{'id'}");
-  my ($description, $contenttype, $bugid, $ispatch, $isobsolete) = FetchSQLData();
-
-  # Flag attachment as to whether or not it can be viewed (as opposed to
-  # being downloaded).  Currently I decide it is viewable if its content
-  # type is either text/.* or application/vnd.mozilla.*.
-  # !!! Yuck, what an ugly hack.  Fix it!
-  my $isviewable = ( $contenttype =~ /^(text|image|application\/vnd\.mozilla\.)/ );
-
-  # Retrieve a list of status flags that have been set on the attachment.
-  my %statuses;
-  SendSQL("SELECT  id, name 
-           FROM    attachstatuses JOIN attachstatusdefs 
-           WHERE   attachstatuses.statusid = attachstatusdefs.id 
-           AND     attach_id = $::FORM{'id'}");
-  while ( my ($id, $name) = FetchSQLData() )
-  {
-    $statuses{$id} = $name;
-  }
-
-  # Retrieve a list of statuses for this bug's product, and build an array 
-  # of hashes in which each hash is a status flag record.
-  # ???: Move this into versioncache or its own routine?
-  my @statusdefs;
-  SendSQL("SELECT   id, name 
-           FROM     attachstatusdefs, bugs 
-           WHERE    bug_id = $bugid 
-           AND      attachstatusdefs.product = bugs.product 
-           ORDER BY sortkey");
-  while ( MoreSQLData() )
-  {
-    my ($id, $name) = FetchSQLData();
-    push @statusdefs, { 'id' => $id , 'name' => $name };
-  }
-
-  # Retrieve a list of attachments for this bug as well as a summary of the bug
-  # to use in a navigation bar across the top of the screen.
-  SendSQL("SELECT attach_id FROM attachments WHERE bug_id = $bugid ORDER BY attach_id");
-  my @bugattachments;
-  push(@bugattachments, FetchSQLData()) while (MoreSQLData());
-  SendSQL("SELECT short_desc FROM bugs WHERE bug_id = $bugid");
-  my ($bugsummary) = FetchSQLData();
-
-  # Define the variables and functions that will be passed to the UI template.
-  $vars->{'attachid'} = $::FORM{'id'}; 
-  $vars->{'description'} = $description; 
-  $vars->{'contenttype'} = $contenttype; 
-  $vars->{'bugid'} = $bugid; 
-  $vars->{'bugsummary'} = $bugsummary; 
-  $vars->{'ispatch'} = $ispatch; 
-  $vars->{'isobsolete'} = $isobsolete; 
-  $vars->{'isviewable'} = $isviewable; 
-  $vars->{'statuses'} = \%statuses; 
-  $vars->{'statusdefs'} = \@statusdefs; 
-  $vars->{'attachments'} = \@bugattachments; 
-
-  # Return the appropriate HTTP response headers.
-  print "Content-Type: text/html\n\n";
-
-  # Generate and return the UI (HTML page) from the appropriate template.
-  $template->process("attachment/edit.html.tmpl", $vars)
-    || ThrowTemplateError($template->error());
-}
-
-
-sub update 
-{
-  # Update an attachment record.
-
-  # Get the bug ID for the bug to which this attachment is attached.
-  SendSQL("SELECT bug_id FROM attachments WHERE attach_id = $::FORM{'id'}");
-  my $bugid = FetchSQLData() 
-    || DisplayError("Cannot figure out bug number.")
-    && exit;
-
-  # Lock database tables in preparation for updating the attachment.
-  if ($::driver eq 'mysql') {
-    SendSQL("LOCK TABLES attachments WRITE , attachstatuses WRITE , 
-             attachstatusdefs READ , fielddefs READ , bugs_activity WRITE");
-  }
-
-  # Get a copy of the attachment record before we make changes
-  # so we can record those changes in the activity table.
-  SendSQL("SELECT description, mimetype, ispatch, isobsolete 
-           FROM attachments WHERE attach_id = $::FORM{'id'}");
-  my ($olddescription, $oldcontenttype, $oldispatch, $oldisobsolete) = FetchSQLData();
-
-  # Get the list of old status flags.
-  SendSQL("SELECT    attachstatusdefs.name 
-           FROM      attachments, attachstatuses, attachstatusdefs
-           WHERE     attachments.attach_id = $::FORM{'id'}
-           AND       attachments.attach_id = attachstatuses.attach_id
-           AND       attachstatuses.statusid = attachstatusdefs.id
-           ORDER BY  attachstatusdefs.sortkey
-          ");
-  my @oldstatuses;
-  while (MoreSQLData()) {
-    push(@oldstatuses, FetchSQLData());
-  }
-  my $oldstatuslist = join(', ', @oldstatuses);
-
-  # Update the database with the new status flags.
-  SendSQL("DELETE FROM attachstatuses WHERE attach_id = $::FORM{'id'}");
-  foreach my $statusid (@{$::MFORM{'status'}}) 
-  {
-    SendSQL("INSERT INTO attachstatuses (attach_id, statusid) VALUES ($::FORM{'id'}, $statusid)");
-  }
-
-  # Get the list of new status flags.
-  SendSQL("SELECT    attachstatusdefs.name 
-           FROM      attachments, attachstatuses, attachstatusdefs
-           WHERE     attachments.attach_id = $::FORM{'id'}
-           AND       attachments.attach_id = attachstatuses.attach_id
-           AND       attachstatuses.statusid = attachstatusdefs.id
-           ORDER BY  attachstatusdefs.sortkey
-          ");
-  my @newstatuses;
-  while (MoreSQLData()) {
-    push(@newstatuses, FetchSQLData());
-  }
-  my $newstatuslist = join(', ', @newstatuses);
-
-  # Quote the description and content type for use in the SQL UPDATE statement.
-  my $quoteddescription = SqlQuote($::FORM{'description'});
-  my $quotedcontenttype = SqlQuote($::FORM{'contenttype'});
-
-  # Update the attachment record in the database.
-  # Sets the creation timestamp to itself to avoid it being updated automatically.
-  SendSQL("UPDATE  attachments 
-           SET     description = $quoteddescription , 
-                   mimetype = $quotedcontenttype , 
-                   ispatch = $::FORM{'ispatch'} , 
-                   isobsolete = $::FORM{'isobsolete'} , 
-                   creation_ts = creation_ts
-           WHERE   attach_id = $::FORM{'id'}
-         ");
-
-  # Record changes in the activity table.
-  if ($olddescription ne $::FORM{'description'}) {
-    my $quotedolddescription = SqlQuote($olddescription);
-    my $fieldid = GetFieldID('attachments.description');
-    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
-             VALUES ($bugid, $::FORM{'id'}, $::userid, NOW(), $fieldid, $quotedolddescription, $quoteddescription)");
-  }
-  if ($oldcontenttype ne $::FORM{'contenttype'}) {
-    my $quotedoldcontenttype = SqlQuote($oldcontenttype);
-    my $fieldid = GetFieldID('attachments.mimetype');
-    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
-             VALUES ($bugid, $::FORM{'id'}, $::userid, NOW(), $fieldid, $quotedoldcontenttype, $quotedcontenttype)");
-  }
-  if ($oldispatch ne $::FORM{'ispatch'}) {
-    my $fieldid = GetFieldID('attachments.ispatch');
-    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
-             VALUES ($bugid, $::FORM{'id'}, $::userid, NOW(), $fieldid, $oldispatch, $::FORM{'ispatch'})");
-  }
-  if ($oldisobsolete ne $::FORM{'isobsolete'}) {
-    my $fieldid = GetFieldID('attachments.isobsolete');
-    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
-             VALUES ($bugid, $::FORM{'id'}, $::userid, NOW(), $fieldid, $oldisobsolete, $::FORM{'isobsolete'})");
-  }
-  if ($oldstatuslist ne $newstatuslist) {
-    my ($removed, $added) = DiffStrings($oldstatuslist, $newstatuslist);
-    my $quotedremoved = SqlQuote($removed);
-    my $quotedadded = SqlQuote($added);
-    my $fieldid = GetFieldID('attachstatusdefs.name');
-    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
-             VALUES ($bugid, $::FORM{'id'}, $::userid, NOW(), $fieldid, $quotedremoved, $quotedadded)");
-  }
-
-  # Unlock all database tables now that we are finished updating the database.
-  if ($::driver eq 'mysql') {
-    SendSQL("UNLOCK TABLES");
-  }
-
-  # If this installation has enabled the request manager, let the manager know
-  # an attachment was updated so it can check for requests on that attachment
-  # and fulfill them.  The request manager allows users to request database
-  # changes of other users and tracks the fulfillment of those requests.  When
-  # an attachment record is updated and the request manager is called, it will
-  # fulfill those requests that were requested of the user performing the update
-  # which are requests for the attachment being updated.
-  #my $requests;
-  #if (Param('userequestmanager'))
-  #{
-  #  use Request;
-  #  # Specify the fieldnames that have been updated.
-  #  my @fieldnames = ('description', 'mimetype', 'status', 'ispatch', 'isobsolete');
-  #  # Fulfill pending requests.
-  #  $requests = Request::fulfillRequest('attachment', $::FORM{'id'}, @fieldnames);
-  #  $vars->{'requests'} = $requests; 
-  #}
-
-  # If the user submitted a comment while editing the attachment, 
-  # add the comment to the bug.
-  if ( $::FORM{'comment'} )
-  {
-    use Text::Wrap;
-    $Text::Wrap::columns = 80;
-    $Text::Wrap::huge = 'wrap';
-
-    # Append a string to the comment to let users know that the comment came from
-    # the "edit attachment" screen.
-    my $comment = qq|(From update of attachment $::FORM{'id'})\n| . $::FORM{'comment'};
-
-    my $wrappedcomment = "";
-    foreach my $line (split(/\r\n|\r|\n/, $comment))
-    {
-      if ( $line =~ /^>/ )
-      {
-        $wrappedcomment .= $line . "\n";
-      }
-      else
-      {
-        $wrappedcomment .= wrap('', '', $line) . "\n";
-      }
-    }
-
-    # Get the user's login name since the AppendComment function needs it.
-    my $who = DBID_to_name($::userid);
-    # Mention $::userid again so Perl doesn't give me a warning about it.
-    my $neverused = $::userid;
-
-    # Append the comment to the list of comments in the database.
-    AppendComment($bugid, $who, $wrappedcomment);
-
-  }
-
-  # Send mail to let people know the bug has changed.  Uses a special syntax
-  # of the "open" and "exec" commands to capture the output of "processmail",
-  # which "system" doesn't allow, without running the command through a shell,
-  # which backticks (``) do.
-  #system ("./processmail", $bugid , $::userid);
-  #my $mailresults = `./processmail $bugid $::userid`;
-  my $mailresults = '';
-  open(PMAIL, "-|") or exec('./processmail', $bugid, DBID_to_name($::userid));
-  $mailresults .= $_ while <PMAIL>;
-  close(PMAIL);
- 
-  # Define the variables and functions that will be passed to the UI template.
-  $vars->{'attachid'} = $::FORM{'id'}; 
-  $vars->{'bugid'} = $bugid; 
-  $vars->{'mailresults'} = $mailresults; 
-
-  # Return the appropriate HTTP response headers.
-  print "Content-Type: text/html\n\n";
-
-  # Generate and return the UI (HTML page) from the appropriate template.
-  $template->process("attachment/updated.html.tmpl", $vars)
-    || ThrowTemplateError($template->error());
-}

mozilla/webtools/bugzilla/bug_form.pl

@@ -1,378 +0,0 @@
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-#                 Dave Miller <justdave@syndicomm.com>
-
-use diagnostics;
-use strict;
-
-use RelationSet;
-
-# Use the Attachment module to display attachments for the bug.
-use Attachment;
-
-sub show_bug {    
-    # Shut up misguided -w warnings about "used only once".  For some reason,
-    # "use vars" chokes on me when I try it here.
-    sub bug_form_pl_sillyness {
-        my $zz;
-        $zz = %::FORM;
-        $zz = %::proddesc;
-        $zz = %::prodmaxvotes;
-        $zz = @::enterable_products;                                            
-        $zz = @::settable_resolution;
-        $zz = $::unconfirmedstate;
-        $zz = $::milestoneurl;
-        $zz = $::template;
-        $zz = $::vars;
-        $zz = @::legal_priority;
-        $zz = @::legal_platform;
-        $zz = @::legal_severity;
-        $zz = @::legal_bug_status;
-        $zz = @::target_milestone;
-        $zz = @::components;
-        $zz = @::legal_keywords;
-        $zz = @::versions;
-        $zz = @::legal_opsys;
-    }
-
-    # Use templates
-    my $template = $::template;
-    my $vars = $::vars;
-    
-    $vars->{'GetBugLink'} = \&GetBugLink;
-    $vars->{'quoteUrls'} = \&quoteUrls,
-    $vars->{'lsearch'} = \&lsearch,
-    $vars->{'header_done'} = (@_),
-
-    quietly_check_login();
-
-    my $id = $::FORM{'id'};
-    
-    if (!defined($id)) {
-      $template->process("bug/choose.html.tmpl", $vars)
-        || ThrowTemplateError($template->error());
-      exit;
-    }
-    
-    my %user = %{$vars->{'user'}};
-    my %bug;
-
-    # Populate the bug hash with the info we get directly from the DB.
-    my $query = "
-SELECT
-    bugs.bug_id,
-    product,
-    version,
-    rep_platform,
-    op_sys,
-    bug_status,
-    resolution,
-    priority,
-    bug_severity,
-    component,
-    assigned_to,
-    reporter,
-    bug_file_loc,
-    short_desc,
-    target_milestone,
-    qa_contact,
-    status_whiteboard, ";
-
-    if ($::driver eq 'mysql') {
-        $query .= "
-    date_format(creation_ts, '%Y-%m-%d %H:%i'),
-    groupset,  
-    delta_ts, ";
-    } elsif ($::driver eq 'Pg') {
-        $query .= "
-    TO_CHAR(creation_ts, 'YYYY-MM-DD HH24:MI:SS'),
-    groupset,
-    TO_CHAR(delta_ts, 'YYYYMMDDHH24MISS'), ";
-    }
-
-    $query .= "
-    SUM(votes.count)
-FROM 
-    bugs LEFT JOIN votes USING(bug_id)
-WHERE 
-    bugs.bug_id = $id
-GROUP BY 
-    bugs.bug_id,
-    product,
-    version,
-    rep_platform,
-    op_sys,
-    bug_status,
-    resolution,
-    priority,
-    bug_severity,
-    component,
-    assigned_to,
-    reporter,
-    bug_file_loc,
-    short_desc,
-    target_milestone,
-    qa_contact,
-    status_whiteboard,
-    creation_ts,
-    groupset,
-    delta_ts ";
-
-    SendSQL($query);
-
-    my $value;
-    my @row = FetchSQLData();
-    foreach my $field ("bug_id", "product", "version", "rep_platform",
-                       "op_sys", "bug_status", "resolution", "priority",
-                       "bug_severity", "component", "assigned_to", "reporter",
-                       "bug_file_loc", "short_desc", "target_milestone",
-                       "qa_contact", "status_whiteboard", "creation_ts",
-                       "groupset", "delta_ts", "votes") 
-    {
-        $value = shift(@row);
-        $bug{$field} = defined($value) ? $value : "";
-    }
-
-    # General arrays of info about the database state
-    GetVersionTable();
-
-    # Fiddle the product list.
-    my $seen_curr_prod;
-    my @prodlist;
-    
-    foreach my $product (@::enterable_products) {
-        if ($product eq $bug{'product'}) {
-            # if it's the product the bug is already in, it's ALWAYS in
-            # the popup, period, whether the user can see it or not, and
-            # regardless of the disallownew setting.
-            $seen_curr_prod = 1;
-            push(@prodlist, $product);
-            next;
-        }
-
-        if (Param("usebuggroupsentry")
-          && GroupExists($product)
-          && !UserInGroup($product))
-        {
-            # If we're using bug groups to restrict entry on products, and
-            # this product has a bug group, and the user is not in that
-            # group, we don't want to include that product in this list.
-            next;
-        }
-
-        push(@prodlist, $product);
-    }
-
-    # The current product is part of the popup, even if new bugs are no longer
-    # allowed for that product
-    if (!$seen_curr_prod) {
-        push (@prodlist, $bug{'product'});
-        @prodlist = sort @prodlist;
-    }
-
-    $vars->{'product'} = \@prodlist;
-    $vars->{'rep_platform'} = \@::legal_platform;
-    $vars->{'priority'} = \@::legal_priority;
-    $vars->{'bug_severity'} = \@::legal_severity;
-    $vars->{'op_sys'} = \@::legal_opsys;
-    $vars->{'bug_status'} = \@::legal_bug_status;
-
-    # Hack - this array contains "" for some reason. See bug 106589.
-    shift @::settable_resolution; 
-    $vars->{'resolution'} = \@::settable_resolution;
-
-    $vars->{'component_'} = $::components{$bug{'product'}};
-    $vars->{'version'} = $::versions{$bug{'product'}};
-    $vars->{'target_milestone'} = $::target_milestone{$bug{'product'}};
-    $bug{'milestoneurl'} = $::milestoneurl{$bug{'product'}} || 
-                           "notargetmilestone.html";
-
-    $vars->{'use_votes'} = $::prodmaxvotes{$bug{'product'}};
-
-    # Add additional, calculated fields to the bug hash
-    if (@::legal_keywords) {
-        $vars->{'use_keywords'} = 1;
-
-        SendSQL("SELECT keyworddefs.name 
-                 FROM keyworddefs, keywords
-                 WHERE keywords.bug_id = $id 
-                 AND keyworddefs.id = keywords.keywordid
-                 ORDER BY keyworddefs.name");
-        my @keywords;
-        while (MoreSQLData()) {
-            push(@keywords, FetchOneColumn());
-        }
-
-        $bug{'keywords'} = \@keywords;
-    }    
-
-    # Attachments
-    $bug{'attachments'} = Attachment::query($id);
-
-    # Dependencies
-    my @list;
-    SendSQL("SELECT dependson FROM dependencies WHERE  
-             blocked = $id ORDER BY dependson");
-    while (MoreSQLData()) {
-        my ($i) = FetchSQLData();
-        push(@list, $i);
-    }
-
-    $bug{'dependson'} = \@list;
-
-    my @list2;
-    SendSQL("SELECT blocked FROM dependencies WHERE  
-             dependson = $id ORDER BY blocked");
-    while (MoreSQLData()) {
-        my ($i) = FetchSQLData();
-        push(@list2, $i);
-    }
-
-    $bug{'blocked'} = \@list2;
-
-    # Groups
-    my @groups;
-    if ($::usergroupset ne '0' || $bug{'groupset'} ne '0') {      
-        my $bug_groupset = $bug{'groupset'};
-    
-        if ($::driver eq 'mysql') {
-            SendSQL("select bit, name, description, (bit & $bug{'groupset'} != 0), " .
-                    "(bit & $::usergroupset != 0) from groups where isbuggroup != 0 " .
-                    # Include active groups as well as inactive groups to which
-                    # the bug already belongs.  This way the bug can be removed
-                    # from an inactive group but can only be added to active ones.
-                    "and ((isactive = 1 or (bit & $bug{'groupset'} != 0)) or " .
-                    "(bit & $bug{'groupset'} != 0)) " .
-                    "order by description");
-        } elsif ($::driver eq 'Pg') {
-            SendSQL("select group_bit, name, description, (group_bit & int8($bug{'groupset'}) != 0), " .
-                    "(group_bit & int8($::usergroupset) != 0) from groups where isbuggroup != 0 " .
-                    # Include active groups as well as inactive groups to which
-                    # the bug already belongs.  This way the bug can be removed
-                    # from an inactive group but can only be added to active ones.
-                    "and ((isactive = 1 or (group_bit & int8($bug{'groupset'}) != 0)) or " .
-                    "(group_bit & int8($bug{'groupset'}) != 0)) " .
-                    "order by description");
-        }
-
-        $user{'inallgroups'} = 1;
-
-        while (MoreSQLData()) {
-            my ($bit, $name, $description, $ison, $ingroup) = FetchSQLData();
-            # For product groups, we only want to display the checkbox if either
-            # (1) The bit is already set, or
-            # (2) The user is in the group, but either:
-            #     (a) The group is a product group for the current product, or
-            #     (b) The group name isn't a product name
-            # This means that all product groups will be skipped, but 
-            # non-product bug groups will still be displayed.
-            if($ison || 
-               ($ingroup && (($name eq $bug{'product'}) ||
-                             (!defined $::proddesc{$name}))))
-            {
-                $user{'inallgroups'} &= $ingroup;
-
-                push (@groups, { "bit" => $bit,
-                                 "ison" => $ison,
-                                 "ingroup" => $ingroup,
-                                 "description" => $description });            
-            }
-        }
-
-        # If the bug is restricted to a group, display checkboxes that allow
-        # the user to set whether or not the reporter 
-        # and cc list can see the bug even if they are not members of all 
-        # groups to which the bug is restricted.
-        if ($bug{'groupset'} != 0) {
-            $bug{'inagroup'} = 1;
-
-            # Determine whether or not the bug is always accessible by the
-            # reporter, QA contact, and/or users on the cc: list.
-            SendSQL("SELECT reporter_accessible, cclist_accessible
-                     FROM   bugs
-                     WHERE  bug_id = $id
-                    ");
-            ($bug{'reporter_accessible'}, 
-             $bug{'cclist_accessible'}) = FetchSQLData();        
-        }
-    }
-    $vars->{'groups'} = \@groups;
-
-    my $movers = Param("movers");
-    $user{'canmove'} = Param("move-enabled") 
-                       && (defined $::COOKIE{"Bugzilla_login"}) 
-                       && ($::COOKIE{"Bugzilla_login"} =~ /\Q$movers\E/);
-
-    # User permissions
-
-    # In the below, if the person hasn't logged in ($::userid == 0), then
-    # we treat them as if they can do anything.  That's because we don't
-    # know why they haven't logged in; it may just be because they don't
-    # use cookies.  Display everything as if they have all the permissions
-    # in the world; their permissions will get checked when they log in
-    # and actually try to make the change.
-    $user{'canedit'} = $::userid == 0
-                       || $::userid == $bug{'reporter'}
-                       || $::userid == $bug{'qa_contact'}
-                       || $::userid == $bug{'assigned_to'}
-                       || UserInGroup("editbugs");                   
-    $user{'canconfirm'} = ($::userid == 0) || UserInGroup("canconfirm");
-
-    # Bug states
-    $bug{'isunconfirmed'} = ($bug{'bug_status'} eq $::unconfirmedstate);
-    $bug{'isopened'} = IsOpenedState($bug{'bug_status'});
-
-    # People involved with the bug
-    $bug{'assigned_to_email'} = DBID_to_name($bug{'assigned_to'});
-    $bug{'assigned_to'} = DBID_to_real_or_loginname($bug{'assigned_to'});
-    $bug{'reporter'} = DBID_to_real_or_loginname($bug{'reporter'});
-    $bug{'qa_contact'} = $bug{'qa_contact'} > 0 ? 
-                                          DBID_to_name($bug{'qa_contact'}) : "";
-
-    my $ccset = new RelationSet;
-    $ccset->mergeFromDB("SELECT who FROM cc WHERE bug_id=$id");
-    
-    my @cc = $ccset->toArrayOfStrings();
-    $bug{'cc'} = \@cc if $cc[0];
-
-    # Next bug in list (if there is one)
-    my @bug_list;
-    if ($::COOKIE{"BUGLIST"} && $id) 
-    {
-        @bug_list = split(/:/, $::COOKIE{"BUGLIST"});
-    }
-    $vars->{'bug_list'} = \@bug_list;
-
-    $bug{'comments'} = GetComments($bug{'bug_id'});
-
-    # This is length in number of comments
-    $bug{'longdesclength'} = scalar(@{$bug{'comments'}});
-
-    # Add the bug and user hashes to the variables
-    $vars->{'bug'} = \%bug;
-    $vars->{'user'} = \%user;
-
-    # Generate and return the UI (HTML page) from the appropriate template.
-    $template->process("bug/edit.html.tmpl", $vars)
-      || ThrowTemplateError($template->error());
-}
- 
-1;

mozilla/webtools/bugzilla/bug_status.html

@@ -1,206 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<HTML>
-
-<!--
-     The contents of this file are subject to the Mozilla Public
-     License Version 1.1 (the "License"); you may not use this file
-     except in compliance with the License. You may obtain a copy of
-     the License at http://www.mozilla.org/MPL/
-    
-     Software distributed under the License is distributed on an "AS
-     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-     implied. See the License for the specific language governing
-     rights and limitations under the License.
-    
-     The Original Code is the Bugzilla Bug Tracking System.
-    
-     The Initial Developer of the Original Code is Netscape Communications
-     Corporation. Portions created by Netscape are
-     Copyright (C) 1998 Netscape Communications Corporation. All
-     Rights Reserved.
-    
-     Contributor(s): 
-
-     Contributor(s): Terry Weissman <terry@mozilla.org>
--->
-
-<head>
-<TITLE>A Bug's Life Cycle</TITLE>
-<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-</head>
-<body>
-
-<h1 ALIGN=CENTER>A Bug's Life Cycle</h1>
-
-The <B>status</B> and <B>resolution</B> field define and track the
-life cycle of a bug.
-
-<a name="status"></a>
-<p>
-<TABLE BORDER=1 CELLPADDING=4>
-
-<TR ALIGN=CENTER VALIGN=TOP>
-<TD WIDTH="50%"><H1>STATUS</H1> <TD><H1>RESOLUTION</H1>
-
-<TR VALIGN=TOP>
-<TD>The <B>status</B> field indicates the general health of a bug. Only
-certain status transitions are allowed.
-<TD>The <b>resolution</b> field indicates what happened to this bug.
-
-<TR VALIGN=TOP><TD>
-<DL><DT><B>
-<A HREF="confirmhelp.html">UNCONFIRMED</A></B> 
-<DD> This bug has recently been added to the database.  Nobody has
-     validated that this bug is true.  Users who have the "canconfirm"
-     permission set may confirm this bug, changing its state to NEW.
-     Or, it may be directly resolved and marked RESOLVED.
-<DT><B>NEW</B> 
-<DD> This bug has recently been added to the assignee's list of bugs
-     and must be processed. Bugs in this state may be accepted, and
-     become <B>ASSIGNED</B>, passed on to someone else, and remain
-     <B>NEW</B>, or resolved and marked <B>RESOLVED</B>.
-<DT><B>ASSIGNED</B> 
-<DD> This bug is not yet resolved, but is assigned to the proper
-     person. From here bugs can be given to another person and become
-     <B>NEW</B>, or resolved and become <B>RESOLVED</B>.
-<DT><B>REOPENED</B>
-<DD>This bug was once resolved, but the resolution was deemed
-     incorrect.  For example, a <B>WORKSFORME</B> bug is
-     <B>REOPENED</B> when more information shows up and the bug is now
-     reproducible.  From here bugs are either marked <B>ASSIGNED</B>
-     or <B>RESOLVED</B>.
-</DL>
-<TD>
-<DL>
-<DD> No resolution yet. All bugs which are in one of these "open" states
-     have the resolution set to blank. All other bugs
-     will be marked with one of the following resolutions.
-</DL>
-
-<TR VALIGN=TOP><TD>
-<DL>
-<DT><B>RESOLVED</B> 
-<DD> A resolution has been taken, and it is awaiting verification by
-     QA. From here bugs are either re-opened and become
-     <B>REOPENED</B>, are marked <B>VERIFIED</B>, or are closed for good
-     and marked <B>CLOSED</B>.
-<DT><B>VERIFIED</B>
-<DD> QA has looked at the bug and the resolution and agrees that the
-     appropriate resolution has been taken.  Bugs remain in this state
-     until the product they were reported against actually ships, at
-     which point they become <B>CLOSED</B>.
-<DT><B>CLOSED</B> 
-<DD> The bug is considered dead, the resolution is correct. Any zombie
-     bugs who choose to walk the earth again must do so by becoming
-     <B>REOPENED</B>.
-</DL>
-
-<TD>
-<DL>
-<DT><B>FIXED</B>
-<DD> A fix for this bug is checked into the tree and tested.
-<DT><B>INVALID</B>
-<DD> The problem described is not a bug 
-<DT><B>WONTFIX</B>
-<DD> The problem described is a bug which will never be fixed.
-<DT><B>LATER</B>
-<DD> The problem described is a bug which will not be fixed in this
-     version of the product.
-<DT><B>REMIND</B>
-<DD> The problem described is a bug which will probably not be fixed in this
-     version of the product, but might still be.
-<DT><B>DUPLICATE</B>
-<DD> The problem is a duplicate of an existing bug. Marking a bug
-     duplicate requires the bug# of the duplicating bug and will at
-     least put that bug number in the description field.
-<DT><B>WORKSFORME</B>
-<DD> All attempts at reproducing this bug were futile, reading the
-     code produces no clues as to why this behavior would occur. If
-     more information appears later, please re-assign the bug, for
-     now, file it.
-</DL>
-</TABLE>
-
-<H1>Other Fields</H1>
-
-<table border=1 cellpadding=4><tr><td>
-<h2><a name="severity">Severity</a></h2>
-
-This field describes the impact of a bug.
-
-<p>
-<p>
- 
-<table>
-<tr><th>Blocker</th><td>Blocks development and/or testing work
-<tr><th>Critical</th><td>crashes, loss of data, severe memory leak 
-<tr><th>Major</th><td>major loss of function 
-<tr><th>Minor</th><td>minor loss of function, or other problem where easy workaround is present 
-<tr><th>Trivial</th><td>cosmetic problem like misspelled words or misaligned text 
-<tr><th>Enhancement</th><td>Request for enhancement
-</table> 
-
-</td><td>
-
-<h2><a name="priority">Priority</a></h2>
-
-This field describes the importance and order in which a bug should be
-fixed.  This field is utilized by the programmers/engineers to
-prioritize their work to be done.  The available priorities are:
-
-<p>
-<p>
-
-<table>
-<tr><th>P1</th><td>Most important
-<tr><th>P2</th><td>
-<tr><th>P3</th><td>
-<tr><th>P4</th><td>
-<tr><th>P5</th><td>Least important
-</table>
-</tr></table>
-
-<h2><a name="rep_platform">Platform</a></h2>
-This is the hardware platform against which the bug was reported.  Legal
-platforms include:
-
-<UL>
-<LI> All (happens on all platform; cross-platform bug)
-<LI> Macintosh
-<LI> PC
-<LI> Sun
-<LI> HP
-</UL>
-
-<b>Note:</b> Selecting the option "All" does not select bugs assigned against all platforms.  It
-merely selects bugs that <b>occur</b> on all platforms.
-
-<h2><a name="op_sys">Operating System</a></h2>
-This is the operating system against which the bug was reported.  Legal
-operating systems include:
-
-<UL>
-<LI> All (happens on all operating systems; cross-platform bug)
-<LI> Windows 95
-<LI> Mac System 8.0
-<LI> Linux
-</UL>
-
-Note that the operating system implies the platform, but not always.
-For example, Linux can run on PC and Macintosh and others.
-
-<h2><a name="assigned_to">Assigned To</a></h2>
-
-This is the person in charge of resolving the bug.  Every time this
-field changes, the status changes to <B>NEW</B> to make it easy to see
-which new bugs have appeared on a person's list.
-
-The default status for queries is set to NEW, ASSIGNED and REOPENED. When
-searching for bugs that have been resolved or verified, remember to set the
-status field appropriately. 
-
-<hr>
-<!-- hhmts start -->
-Last modified: Sun Apr 14 12:51:23 EST 2002
-<!-- hhmts end -->
-</body> </html>

mozilla/webtools/bugzilla/bugwritinghelp.html

@@ -1,392 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<html>
-<head>
-<meta http-equiv="content-type" content="text/html; charset=iso-8859-1">
-<title>Bug Writing Guidelines</title>
-</head>
-<body>
-<center>
-<h1>Bug Writing Guidelines</h1>
-</center>
-
-<h3>Why You Should Read This</h3>
-
-<blockquote>
-<p>Simply put, the more effectively you report a bug, the more
-likely an engineer will actually fix it.</p>
-
-<p>These guidelines are a general
-tutorial to teach novice and intermediate bug reporters how to compose effective bug reports. Not every sentence may precisely apply to
-your software project.</p>
-</blockquote>
-
-<h3>How to Write a Useful Bug Report</h3>
-
-<blockquote>
-<p>Useful bug reports are ones that get bugs fixed. A useful bug
-report normally has two qualities:</p>
-
-<ol>
-<li><b>Reproducible.</b> If an engineer can't see the bug herself to prove that it exists, she'll probably stamp your bug report "WORKSFORME" or "INVALID" and move on to the next bug. Every detail you can provide helps.<br>
-<br>
-</li>
-
-<li><b>Specific.</b> The quicker the engineer can isolate the bug
-to a specific area, the more likely she'll expediently fix it. 
-(If a programmer or tester has to decypher a bug, they may spend
-more time cursing the submitter than solving the problem.)
-<br>
-<br>
-[ <a href="#tips" name="Anchor">Tell Me More</a> ]
-</li>
-</ol>
-
-<p>Let's say the application you're testing is a web browser. You
-crash at foo.com, and want to write up a bug report:</p>
-
-<blockquote>
-<p><b>BAD:</b> "My browser crashed. I think I was on www.foo.com. I play golf with Bill Gates, so you better fix this problem, or I'll report you to him. By the way, your Back icon looks like a squashed rodent. UGGGLY. And my grandmother's home page is all messed up in your browser. Thx 4 UR help."
-</p>
-
-<p>
- <b>GOOD:</b> "I crashed each time I went to www.foo.com, using
-the 2002-02-25 build on a Windows 2000 system. I also
-rebooted into Linux, and reproduced this problem using the 2002-02-24
-Linux build.
-</p>
-
-<p>
- It again crashed each time upon drawing the Foo banner at the top
-of the page. I broke apart the page, and discovered that the
-following image link will crash the application reproducibly,
-unless you remove the "border=0" attribute:
-</p>
-
-<p>
- <tt>&lt;IMG SRC="http://www.foo.com/images/topics/topicfoos.gif"
-width="34" height="44" border="0" alt="News"&gt;</tt>
-</p>
-</blockquote>
-</blockquote>
-
-<h3>How to Enter your Useful Bug Report into Bugzilla:</h3>
-
-<blockquote>
-<p>Before you enter your bug, use Bugzilla's 
-<a href="query.cgi">search page</a> to determine whether the defect you've discovered is a known, already-reported bug. If your bug is the 37th duplicate of a known issue, you're more likely to annoy the engineer. (Annoyed
-engineers fix fewer bugs.)
-</p>
-
-<p>
-Next, be sure to reproduce your bug using a recent
-build. Engineers tend to be most interested in problems affecting
-the code base that they're actively working on. After all, the bug you're reporting
-may already be fixed.
-
-</p>
-
-<p>
- If you've discovered a new bug using a current build, report it in
-Bugzilla:
-</p>
-
-<ol>
-<li>From your Bugzilla main page, choose 
-"<a href="enter_bug.cgi">Enter a new bug</a>".</li>
-
-<li>Select the product that you've found a bug in.</li>
-
-<li>Enter your e-mail address, password, and press the "Login"
-button. (If you don't yet have a password, leave the password field empty, 
-and press the "E-mail me a password" button instead.
-You'll quickly receive an e-mail message with your password.)</li>
-</ol>
-
-<p>Now, fill out the form. Here's what it all means:</p>
-
-<p><b>Where did you find the bug?</b></p>
-
-<blockquote>
-<p><b>Product: In which product did you find the bug?</b><br>
- You just specified this on the last page, so you can't edit it here.</p>
-
-<p><b>Version: In which product version did you find the
-bug?</b><br>
- (If applicable)</p>
-
-<p><b>Component: In which component does the bug exist?</b><br>
-Bugzilla requires that you select a component to enter a bug. (Not sure which to choose? 
-Click on the Component link. You'll see a description of each component, to help you make the best choice.)</p>
-
-<p><b>OS: On which Operating System (OS) did you find this bug?</b>
-(e.g. Linux, Windows 2000, Mac OS 9.)<br>
- If you know the bug happens on all OSs, choose 'All'. Otherwise,
-select the OS that you found the bug on, or "Other" if your OS
-isn't listed.</p>
-</blockquote>
-
-<p><b>How important is the bug?</b></p>
-
-<blockquote>
-<p><b>Severity: How damaging is the bug?</b><br>
- This item defaults to 'normal'. If you're not sure what severity your bug deserves, click on the Severity link.
- You'll see a description of each severity rating. <br>
-</p>
-</blockquote>
-
-<p><b>Who will be following up on the bug?</b></p>
-
-<blockquote>
-<p><b>Assigned To: Which engineer should be responsible for fixing
-this bug?</b><br>
- Bugzilla will automatically assign the bug to a default engineer
-upon submitting a bug report. If you'd prefer to directly assign the bug to
-someone else, enter their e-mail address into this field. (To see the list of
-default engineers for each component, click on the Component
-link.)</p>
-
-<p><b>Cc: Who else should receive e-mail updates on changes to this
-bug?</b><br>
- List the full e-mail addresses of other individuals who should
-receive an e-mail update upon every change to the bug report. You
-can enter as many e-mail addresses as you'd like, separated by spaces or commas, as long as those
-people have Bugzilla accounts.</p>
-</blockquote>
-
-<p><b>What else can you tell the engineer about the bug?</b></p>
-
-<blockquote>
-
-<p><b>Summary:</b> <b>How would you describe the bug, in
-approximately 60 or fewer characters?</b><br>
- A good summary should <b>quickly and uniquely identify a bug
-report</b>. Otherwise, an engineer cannot meaningfully identify
-your bug by its summary, and will often fail to pay attention to
-your bug report when skimming through a 10 page bug list.<br>
-<br>
- A useful summary might be 
- "<tt>PCMCIA install fails on Tosh Tecra 780DVD w/ 3c589C</tt>". 
- "<tt>Software fails</tt>" or "<tt>install problem</tt>" would be
-examples of a bad summary.<br>
-<br>
- [ <a href="#summary">Tell Me More</a> ]<br>
-<br>
- <b>Description: </b><br>
- Please provide a detailed problem report in this field.
-Your bug's recipients will most likely expect the following information:</p>
-
-<blockquote>
-<p><b>Overview Description:</b> More detailed expansion of
-summary.</p>
-
-<blockquote>
-<pre>
-Drag-selecting any page crashes Mac builds in NSGetFactory
-</pre>
-</blockquote>
-
-<p><b>Steps to Reproduce:</b> Minimized, easy-to-follow steps that will
-trigger the bug. Include any special setup steps.</p>
-
-<blockquote>
-<pre>
-1) View any web page. (I used the default sample page,
-resource:/res/samples/test0.html)
-                          
-2) Drag-select the page. (Specifically, while holding down 
-the mouse button, drag the mouse pointer downwards from any 
-point in the browser's content region to the bottom of the 
-browser's content region.)                   
-</pre>
-</blockquote>
-
-<p>
- <b>Actual Results:</b> What the application did after performing
-the above steps. 
-</p>
-
-<blockquote>
-<pre>
-The application crashed. Stack crawl appended below from MacsBug.
-</pre>
-</blockquote>
-
-<p><b>Expected Results:</b> What the application should have done,
-were the bug not present.</p>
-
-<blockquote>
-<pre>
-The window should scroll downwards. Scrolled content should be selected. 
-(Or, at least, the application should not crash.)
-</pre>
-</blockquote>
-
-<p><b>Build Date &amp; Platform:</b> Date and platform of the build
-that you first encountered the bug in.</p>
-
-<blockquote>
-<pre>
-Build 2002-03-15 on Mac OS 9.0
-</pre>
-</blockquote>
-
-<p><b>Additional Builds and Platforms:</b> Whether or not the bug
-takes place on other platforms (or browsers, if applicable).</p>
-
-<blockquote>
-<pre>
-- Also Occurs On        
-    Mozilla (2002-03-15 build on Windows NT 4.0) 
-                                    
-- Doesn't Occur On        
-    Mozilla (2002-03-15 build on Red Hat Linux; feature not supported)        
-    Internet Explorer 5.0 (shipping build on Windows NT 4.0)        
-    Netscape Communicator 4.5 (shipping build on Mac OS 9.0)
-</pre>
-</blockquote>
-
-<p><b>Additional Information:</b> Any other debugging information.
-For crashing bugs:</p>
-
-<ul>
-<li><b>Win32:</b> if you receive a Dr. Watson error, please note
-the type of the crash, and the module that the application crashed
-in. (e.g. access violation in apprunner.exe)</li>
-
-<li><b>Mac OS:</b> if you're running MacsBug, please provide the
-results of a <b>how</b> and an <b>sc</b>:</li>
-</ul>
-
-<blockquote>
-<pre>
-*** MACSBUG STACK CRAWL OF CRASH (Mac OS)
-Calling chain using A6/R1 links 
-    Back chain  ISA  Caller 
-    00000000    PPC  0BA85E74   
-    03AEFD80    PPC  0B742248   
-    03AEFD30    PPC  0B50FDDC  NSGetFactory+027FC
-PowerPC unmapped memory exception at 0B512BD0 NSGetFactory+055F0
-</pre>
-</blockquote>
-</blockquote>
-</blockquote>
-
-<p>You're done!<br>
-<br>
- After double-checking your entries for any possible errors, press
-the "Commit" button, and your bug report will now be in the
-Bugzilla database.<br>
-</p>
-</blockquote>
-
-<hr>
-<h3>More Information on Writing Good Bugs</h3>
-
-<blockquote>
-<p><b><a name="tips"></a> 1. General Tips for a Useful Bug
-Report</b>
-</p>
-
-<blockquote>
-<p>
- <b>Use an explicit structure, so your bug reports are easy to
-skim.</b> Bug report users often need immediate access to specific
-sections of your bug. If your Bugzilla installation supports the
-Bugzilla Helper, use it.
-</p>
-
-<p>
- <b>Avoid cuteness if it costs clarity.</b> Nobody will be laughing
-at your funny bug title at 3:00 AM when they can't remember how to
-find your bug.
-</p>
-
-<p>
- <b>One bug per report.</b> Completely different people typically
-fix, verify, and prioritize different bugs. If you mix a handful of
-bugs into a single report, the right people probably won't discover
-your bugs in a timely fashion, or at all. Certain bugs are also
-more important than others. It's impossible to prioritize a bug
-report when it contains four different issues, all of differing
-importance.
-</p>
-
-<p>
- <b>No bug is too trivial to report.</b> Unless you're reading the
-source code, you can't see actual software bugs, like a dangling
-pointer -- you'll see their visible manifestations, such as the
-segfault when the application finally crashes. Severe software
-problems can manifest themselves in superficially trivial ways.
-File them anyway.<br>
-</p>
-</blockquote>
-
-<p><b><a name="summary"></a>2. How and Why to Write Good Bug Summaries</b>
-</p>
-
-<blockquote>
-<p><b>You want to make a good first impression on the bug
-recipient.</b> Just like a New York Times headline guides readers
-towards a relevant article from dozens of choices, will your bug summary
-suggest that your bug report is worth reading from dozens or hundreds of
-choices?
-</p>
-
-<p>
- Conversely, a vague bug summary like <tt>install problem</tt> forces anyone
-reviewing installation bugs to waste time opening up your bug to
-determine whether it matters.
-</p>
-
-<p>
- <b>Your bug will often be searched by its summary.</b> Just as
-you'd find web pages with Google by searching by keywords through
-intuition, so will other people locate your bugs. Descriptive bug
-summaries are naturally keyword-rich, and easier to find.
-</p>
-
-<p>
- For example, you'll find a bug titled "<tt>Dragging icons from List View to
-gnome-terminal doesn't paste path</tt>" if you search on "List",
-"terminal", or "path". Those search keywords wouldn't have found a
-bug titled "<tt>Dragging icons
-doesn't paste</tt>".
-</p>
-
-<p>
- Ask yourself, "Would someone understand my bug from just this
-summary?" If so, you've written a fine summary.
-</p>
-
-<p><b>Don't write titles like these:</b></p>
-
-<ol>
- <li>"Can't install" - Why can't you install? What happens when you
-try to install?</li>
-<li>"Severe Performance Problems" - ...and they occur when you do
-what?</li>
-<li>"back button does not work" - Ever? At all?</li>
-</ol>
-
-<p><b>Good bug titles:</b></p>
-<ol>
-<li>"1.0 upgrade installation fails if Mozilla M18 package present"
-- Explains problem and the context.</li>
-<li>"RPM 4 installer crashes if launched on Red Hat 6.2 (RPM 3)
-system" - Explains what happens, and the context.</li>
-</ol>
-
-
-
-</blockquote>
-</blockquote>
-
-<p>(Written and maintained by 
-<a href="http://www.prometheus-music.com/eli">Eli Goldberg</a>. Claudius
-Gayle, Gervase Markham, Peter Mock, Chris Pratt, Tom Schutter and Chris Yeh also
-contributed significant changes. Constructive 
-<a href="mailto:eli@prometheus-music.com">suggestions</a> welcome.)</p>
-
-</body>
-</html>
-

mozilla/webtools/bugzilla/bugzilla.dtd

@@ -1,46 +0,0 @@
-<!ELEMENT bugzilla (bug+)>
-<!ATTLIST bugzilla
-	version CDATA #REQUIRED
-	urlbase CDATA #REQUIRED
-	maintainer CDATA #REQUIRED
-	exporter CDATA #IMPLIED
->
-<!ELEMENT bug (bug_id, (bug_status, product, priority, version, rep_platform, assigned_to, delta_ts, component, reporter, target_milestone?, bug_severity, creation_ts, qa_contact?, op_sys, resolution?, bug_file_loc?, short_desc?, keywords*, status_whiteboard?, dependson*, blocks*, cc*, long_desc*, attachment*)?)>
-<!ATTLIST bug
-	error (NotFound | NotPermitted | InvalidBugId) #IMPLIED
->
-<!ELEMENT bug_id (#PCDATA)>
-<!ELEMENT exporter (#PCDATA)>
-<!ELEMENT urlbase (#PCDATA)>
-<!ELEMENT bug_status (#PCDATA)>
-<!ELEMENT product (#PCDATA)>
-<!ELEMENT priority (#PCDATA)>
-<!ELEMENT version (#PCDATA)>
-<!ELEMENT rep_platform (#PCDATA)>
-<!ELEMENT assigned_to (#PCDATA)>
-<!ELEMENT delta_ts (#PCDATA)>
-<!ELEMENT component (#PCDATA)>
-<!ELEMENT reporter (#PCDATA)>
-<!ELEMENT target_milestone (#PCDATA)>
-<!ELEMENT bug_severity (#PCDATA)>
-<!ELEMENT creation_ts (#PCDATA)>
-<!ELEMENT qa_contact (#PCDATA)>
-<!ELEMENT status_whiteboard (#PCDATA)>
-<!ELEMENT op_sys (#PCDATA)>
-<!ELEMENT resolution (#PCDATA)>
-<!ELEMENT bug_file_loc (#PCDATA)>
-<!ELEMENT short_desc (#PCDATA)>
-<!ELEMENT keywords (#PCDATA)>
-<!ELEMENT dependson (#PCDATA)>
-<!ELEMENT blocks (#PCDATA)>
-<!ELEMENT cc (#PCDATA)>
-<!ELEMENT long_desc (who, bug_when, thetext)>
-<!ELEMENT who (#PCDATA)>
-<!ELEMENT bug_when (#PCDATA)>
-<!ELEMENT thetext (#PCDATA)>
-<!ELEMENT attachment (attachid, date, desc, type?, data?)>
-<!ELEMENT attachid (#PCDATA)>
-<!ELEMENT date (#PCDATA)>
-<!ELEMENT desc (#PCDATA)>
-<!ELEMENT type (#PCDATA)>
-<!ELEMENT data (#PCDATA)>

mozilla/webtools/bugzilla/changepassword.cgi

@@ -1,39 +0,0 @@
-#!/usr/bonsaitools/bin/perl -wT
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-
-use strict;
-
-print q{Content-type: text/html
-
-<HTML>
-<HEAD>
-<META HTTP-EQUIV="Refresh"
-  CONTENT="0; URL=userprefs.cgi">
-</HEAD>
-<BODY>
-This URL is obsolete.  Forwarding you to the correct one.
-<P>
-Going to <A HREF="userprefs.cgi">userprefs.cgi</A>
-<BR>
-</BODY>
-</HTML>
-}

mozilla/webtools/bugzilla/colchange.cgi

@@ -1,124 +0,0 @@
-#!/usr/bonsaitools/bin/perl -wT
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-
-use diagnostics;
-use strict;
-
-use lib qw(.);
-
-use vars qw(
-  @legal_keywords
-  $buffer
-  $template
-  $vars
-);
-
-require "CGI.pl";
-
-print "Content-type: text/html\n";
-
-# The master list not only says what fields are possible, but what order
-# they get displayed in.
-
-ConnectToDatabase();
-GetVersionTable();
-
-my @masterlist = ("opendate", "changeddate", "severity", "priority",
-                  "platform", "owner", "reporter", "status", "resolution",
-                  "product", "component", "version", "os", "votes");
-
-if (Param("usetargetmilestone")) {
-    push(@masterlist, "target_milestone");
-}
-if (Param("useqacontact")) {
-    push(@masterlist, "qa_contact");
-}
-if (Param("usestatuswhiteboard")) {
-    push(@masterlist, "status_whiteboard");
-}
-if (@::legal_keywords) {
-    push(@masterlist, "keywords");
-}
-
-
-push(@masterlist, ("summary", "summaryfull"));
-
-$vars->{masterlist} = \@masterlist;
-
-my @collist;
-if (defined $::FORM{'rememberedquery'}) {
-    my $splitheader = 0;
-    if (defined $::FORM{'resetit'}) {
-        @collist = @::default_column_list;
-    } else {
-        foreach my $i (@masterlist) {
-            if (defined $::FORM{"column_$i"}) {
-                push @collist, $i;
-            }
-        }
-        if (exists $::FORM{'splitheader'}) {
-            $splitheader = $::FORM{'splitheader'};
-        }
-    }
-    my $list = join(" ", @collist);
-    my $urlbase = Param("urlbase");
-    my $cookiepath = Param("cookiepath");
-    print "Set-Cookie: COLUMNLIST=$list ; path=$cookiepath ; expires=Sun, 30-Jun-2029 00:00:00 GMT\n";
-    print "Set-Cookie: SPLITHEADER=$::FORM{'splitheader'} ; path=$cookiepath ; expires=Sun, 30-Jun-2029 00:00:00 GMT\n";
-    print "Refresh: 0; URL=buglist.cgi?$::FORM{'rememberedquery'}\n";
-    print "\n";
-    print "<META HTTP-EQUIV=Refresh CONTENT=\"1; URL=$urlbase"."buglist.cgi?$::FORM{'rememberedquery'}\">\n";
-    print "<TITLE>What a hack.</TITLE>\n";
-    PutHeader ("Change columns");
-    print "Resubmitting your query with new columns...\n";
-    exit;
-}
-
-if (defined $::COOKIE{'COLUMNLIST'}) {
-    @collist = split(/ /, $::COOKIE{'COLUMNLIST'});
-} else {
-    @collist = @::default_column_list;
-}
-
-$vars->{collist} = \@collist;
-
-$vars->{splitheader} = 0;
-if ($::COOKIE{'SPLITHEADER'}) {
-    $vars->{splitheader} = 1;
-}
-
-my %desc = ();
-foreach my $i (@masterlist) {
-    $desc{$i} = $i;
-}
-
-$desc{'summary'} = "Summary (first 60 characters)";
-$desc{'summaryfull'} = "Full Summary";
-
-$vars->{desc} = \%desc;
-$vars->{buffer} = $::buffer;
-
-# Generate and return the UI (HTML page) from the appropriate template.
-print "Content-type: text/html\n\n";
-$template->process("list/change-columns.html.tmpl", $vars)
-  || ThrowTemplateError($template->error());
-

mozilla/webtools/bugzilla/collectstats.pl

@@ -1,202 +0,0 @@
-#!/usr/bonsaitools/bin/perl -w
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>,
-#                 Harrison Page <harrison@netscape.com>
-#         Gervase Markham <gerv@gerv.net>
-
-# Run me out of cron at midnight to collect Bugzilla statistics.
-
-
-use AnyDBM_File;
-use diagnostics;
-use strict;
-use vars @::legal_product;
-
-require "globals.pl";
-
-# tidy up after graphing module
-if (chdir("graphs")) {
-    unlink <./*.gif>;
-    unlink <./*.png>;
-    chdir("..");
-}
-
-ConnectToDatabase(1);
-GetVersionTable();
-
-my @myproducts;
-push( @myproducts, "-All-", @::legal_product );
-
-foreach (@myproducts) {
-    my $dir = "data/mining";
-
-    &check_data_dir ($dir);
-    &collect_stats ($dir, $_);
-}
-
-&calculate_dupes();
-
-sub check_data_dir {
-    my $dir = shift;
-
-    if (! -d) {
-        mkdir $dir, 0777;
-        chmod 0777, $dir;
-    }
-}
-
-sub collect_stats {
-    my $dir = shift;
-    my $product = shift;
-    my $when = localtime (time);
-
-    # NB: Need to mangle the product for the filename, but use the real
-    # product name in the query
-    my $file_product = $product;
-    $file_product =~ s/\//-/gs;
-    my $file = join '/', $dir, $file_product;
-    my $exists = -f $file;
-
-    if (open DATA, ">>$file") {
-        push my @row, &today;
-
-        foreach my $status ('NEW', 'ASSIGNED', 'REOPENED', 'UNCONFIRMED', 'RESOLVED', 'VERIFIED', 'CLOSED') {
-            if( $product eq "-All-" ) {
-                SendSQL("select count(bug_status) from bugs where bug_status='$status'");
-            } else {
-                SendSQL("select count(bug_status) from bugs where bug_status='$status' and product='$product'");
-            }
-
-            push @row, FetchOneColumn();
-        }
-
-        foreach my $resolution ('FIXED', 'INVALID', 'WONTFIX', 'LATER', 'REMIND', 'DUPLICATE', 'WORKSFORME', 'MOVED') {
-            if( $product eq "-All-" ) {
-                SendSQL("select count(resolution) from bugs where resolution='$resolution'");
-            } else {
-                SendSQL("select count(resolution) from bugs where resolution='$resolution' and product='$product'");
-            }
-
-            push @row, FetchOneColumn();
-        }
-
-        if (! $exists) {
-            print DATA <<FIN;
-# Bugzilla Daily Bug Stats
-#
-# Do not edit me! This file is generated.
-#
-# fields: DATE|NEW|ASSIGNED|REOPENED|UNCONFIRMED|RESOLVED|VERIFIED|CLOSED|FIXED|INVALID|WONTFIX|LATER|REMIND|DUPLICATE|WORKSFORME|MOVED
-# Product: $product
-# Created: $when
-FIN
-        }
-
-        print DATA (join '|', @row) . "\n";
-        close DATA;
-    } else {
-        print "$0: $file, $!";
-    }
-}
-
-sub calculate_dupes {
-    SendSQL("SELECT * FROM duplicates");
-
-    my %dupes;
-    my %count;
-    my @row;
-    my $key;
-    my $changed = 1;
-
-    my $today = &today_dash;
-
-    # Save % count here in a date-named file
-    # so we can read it back in to do changed counters
-    # First, delete it if it exists, so we don't add to the contents of an old file
-    if (my @files = <data/duplicates/dupes$today*>) {
-        unlink @files;
-    }
-   
-    dbmopen(%count, "data/duplicates/dupes$today", 0644) || die "Can't open DBM dupes file: $!";
-
-    # Create a hash with key "a bug number", value "bug which that bug is a
-    # direct dupe of" - straight from the duplicates table.
-    while (@row = FetchSQLData()) {
-        my $dupe_of = shift @row;
-        my $dupe = shift @row;
-        $dupes{$dupe} = $dupe_of;
-    }
-
-    # Total up the number of bugs which are dupes of a given bug
-    # count will then have key = "bug number", 
-    # value = "number of immediate dupes of that bug".
-    foreach $key (keys(%dupes)) 
-    {
-        my $dupe_of = $dupes{$key};
-
-        if (!defined($count{$dupe_of})) {
-            $count{$dupe_of} = 0;
-        }
-
-        $count{$dupe_of}++;
-    }   
-
-    # Now we collapse the dupe tree by iterating over %count until
-    # there is no further change.
-    while ($changed == 1)
-    {
-        $changed = 0;
-        foreach $key (keys(%count)) {
-            # if this bug is actually itself a dupe, and has a count...
-            if (defined($dupes{$key}) && $count{$key} > 0) {
-                # add that count onto the bug it is a dupe of,
-                # and zero the count; the check is to avoid
-                # loops
-                if ($count{$dupes{$key}} != 0) {
-                    $count{$dupes{$key}} += $count{$key};
-                    $count{$key} = 0;
-                    $changed = 1;
-                }
-            }
-        }
-    }
-
-    # Remove the values for which the count is zero
-    foreach $key (keys(%count))
-    {
-        if ($count{$key} == 0) {
-            delete $count{$key};
-        }
-    }
-   
-    dbmclose(%count);
-}
-
-sub today {
-    my ($dom, $mon, $year) = (localtime(time))[3, 4, 5];
-    return sprintf "%04d%02d%02d", 1900 + $year, ++$mon, $dom;
-}
-
-sub today_dash {
-    my ($dom, $mon, $year) = (localtime(time))[3, 4, 5];
-    return sprintf "%04d-%02d-%02d", 1900 + $year, ++$mon, $dom;
-}
-

mozilla/webtools/bugzilla/confirmhelp.html

@@ -1,168 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
-<html><head>
-
-<!--
-     The contents of this file are subject to the Mozilla Public
-     License Version 1.1 (the "License"); you may not use this file
-     except in compliance with the License. You may obtain a copy of
-     the License at http://www.mozilla.org/MPL/
-    
-     Software distributed under the License is distributed on an "AS
-     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-     implied. See the License for the specific language governing
-     rights and limitations under the License.
-    
-     The Original Code is the Bugzilla Bug Tracking System.
-    
-     The Initial Developer of the Original Code is Netscape Communications
-     Corporation. Portions created by Netscape are
-     Copyright (C) 2000 Netscape Communications Corporation. All
-     Rights Reserved.
-    
-     Contributor(s): Terry Weissman <terry@mozilla.org>
--->
-
-<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-<title>Understanding the UNCONFIRMED state, and other recent changes</title>
-</head>
-
-<body>
-<h1>Understanding the UNCONFIRMED state, and other recent changes</h1>
-
-<p>
-[This document is aimed primarily at people who have used Bugzilla
-before the UNCONFIRMED state was implemented.  It might be helpful for
-newer users as well.]
-</p>
-
-<p>
-
-New bugs in some products will now show up in a new state,
-UNCONFIRMED.  This means that we have nobody has confirmed that the
-bug is real.  Very busy engineers will probably generally ignore
-UNCONFIRMED that have been assigned to them, until they have been
-confirmed in one way or another.  (Engineers with more time will
-hopefully glance over their UNCONFIRMED bugs regularly.)
-</p>
-
-<p>
-The <a href="bug_status.html">page describing bug fields</a> has been
-updated to include UNCONFIRMED.
-</p>
-
-<p>
-There are two basic ways that a bug can become confirmed (and enter
-the NEW) state.
-</p>
-
-<ul>
-  <li> A user with the appropriate permissions (see below for more on
-       permissions) decides that the bug is a valid one, and confirms
-       it.  We hope to gather a small army of responsible volunteers
-       to regularly go through bugs for us.</li>
-  <li> The bug gathers a certain number of votes. <b>Any</b> valid Bugzilla user may vote for 
-bugs (each user gets a certain number of bugs); any UNCONFIRMED bug which 
-gets enough votes becomes automatically confirmed, and enters the NEW state.</li>
-</ul>
-
-<p>
-One implication of this is that it is worth your time to search the
-bug system for duplicates of your bug to vote on them, before
-submitting your own bug.  If we can spread around knowledge of this
-fact, it ought to help cut down the number of duplicate bugs in the
-system. 
-</p>
-
-<h2>Permissions.</h2>
-
-<p>
-Users now have a certain set of permissions.  To see your permissions,
-check out the
-<a href="userprefs.cgi?bank=permissions">user preferences</a> page.
-</p>
-
-<p>
-If you have the "Can confirm a bug" permission, then you will be able
-to move UNCONFIRMED bugs into the NEW state.
-</p>
-
-<p>
-If you have the "Can edit all aspects of any bug" permission, then you
-can tweak anything about any bug.  If not, you may only edit those
-bugs that you have submitted, or that you have assigned to you (or
-qa-assigned to you).  However, anyone may add a comment to any bug.
-</p>
-
-<p>
-Some people (initially, the initial owners and initial qa-contacts for
-components in the system) have the ability to give the above two
-permissions to other people.  So, if you really feel that you ought to
-have one of these permissions, a good person to ask (via private
-email, please!) is the person who is assigned a relevant bug.
-</p>
-
-<h2>Other details.</h2>
-
-<p>
-An initial stab was taken to decide who would be given which of the
-above permissions.  This was determined by some simple heurstics of
-who was assigned bugs, and who the default owners of bugs were, and a
-look at people who seem to have submitted several bugs that appear to
-have been interesting and valid.  Inevitably, we have failed to give
-someone the permissions they deserve.  Please don't take it
-personally; just bear with us as we shake out the new system.
-</p>
-
-<p>
-People with one of the two bits above can easily confirm their own
-bugs, so bugs they submit will actually start out in the NEW state.
-They can override this when submitting a bug.
-</p>
-
-<p>
-People can ACCEPT or RESOLVE a bug assigned to them, even if they
-aren't allowed to confirm it.  However, the system remembers, and if
-the bug gets REOPENED or reassigned to someone else, it will revert
-back to the UNCONFIRMED state.  If the bug has ever been confirmed,
-then REOPENing or reassigning will cause it to go to the NEW or
-REOPENED state.
-</p>
-
-<p>
-Note that only some products support the UNCONFIRMED state.  In other
-products, all new bugs will automatically start in the NEW state.
-</p>
-
-<h2>Things still to be done.</h2>
-
-<p>
-There probably ought to be a way to get a bug back into the
-UNCONFIRMED state, but there isn't yet.
-</p>
-
-<p>
-If a person has submitted several bugs that get confirmed, then this
-is probably a person who understands the system well, and deserves the
-"Can confirm a bug" permission.  This kind of person should be
-detected and promoted automatically.
-</p>
-
-<p>
-There should also be a way to automatically promote people to get the
-"Can edit all aspects of any bug" permission.
-</p>
-
-<p>
-The "enter a new bug" page needs to be revamped with easy ways for new
-people to educate themselves on the benefit of searching for a bug
-like the one they're about to submit and voting on it, rather than
-adding a new useless duplicate.
-</p>
-
-<hr>
-<p>
-<!-- hhmts start -->
-Last modified: Sun Apr 14 12:55:14 EST 2002
-<!-- hhmts end -->
-</p>
-</body> </html>

mozilla/webtools/bugzilla/contrib/BugzillaEmail.pm

@@ -1,79 +0,0 @@
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# This code is based on code found in bug_email.pl from the bugzilla
-# email tracker.  Initial contributors are :: 
-#                 Terry Weissman <terry@mozilla.org>
-#                 Gregor Fischer <fischer@suse.de>
-#                 Klaas Freitag  <freitag@suse.de>
-#                 Seth Landsman  <seth@dworkin.net>
-
-# The purpose of this module is to abstract out a bunch of the code
-#  that is central to email interfaces to bugzilla and its database
-
-# Contributor : Seth Landsman <seth@dworkin.net>
-
-# Initial checkin : 03/15/00 (SML)
-#  findUser() function moved from bug_email.pl to here
-
-push @INC, "../."; # this script now lives in contrib
-
-require "globals.pl";
-
-use diagnostics;
-use strict;
-
-my $EMAIL_TRANSFORM_NONE = "email_transform_none";
-my $EMAIL_TRANSFORM_BASE_DOMAIN = "email_transform_base_domain";
-my $EMAIL_TRANSFORM_NAME_ONLY = "email_transform_name_only";
-
-# change to do incoming email address fuzzy matching
-my $email_transform = $EMAIL_TRANSFORM_NAME_ONLY;
-
-# findUser()
-# This function takes an email address and returns the user email.
-# matching is sloppy based on the $email_transform parameter
-sub findUser($) {
-  my ($address) = @_;
-  # if $email_transform is $EMAIL_TRANSFORM_NONE, return the address, otherwise, return undef
-  if ($email_transform eq $EMAIL_TRANSFORM_NONE) {
-    my $stmt = "SELECT login_name FROM profiles WHERE profiles.login_name = \'$address\';";
-    SendSQL($stmt);
-    my $found_address = FetchOneColumn();
-    return $found_address;
-  } elsif ($email_transform eq $EMAIL_TRANSFORM_BASE_DOMAIN) {
-    my ($username) = ($address =~ /(.+)@/);
-    my $stmt = "SELECT login_name FROM profiles WHERE profiles.login_name RLIKE \'$username\';";
-    SendSQL($stmt);
-
-    my $domain;
-    my $found = undef;
-    my $found_address;
-    my $new_address = undef;
-    while ((!$found) && ($found_address = FetchOneColumn())) {
-      ($domain) = ($found_address =~ /.+@(.+)/);
-      if ($address =~ /$domain/) {
-        $found = 1;
-        $new_address = $found_address;
-      }
-    }
-    return $new_address;
-  } elsif ($email_transform eq $EMAIL_TRANSFORM_NAME_ONLY) {
-    my ($username) = ($address =~ /(.+)@/);
-    my $stmt = "SELECT login_name FROM profiles WHERE profiles.login_name RLIKE \'$username\';";
-    SendSQL($stmt);
-    my $found_address = FetchOneColumn();
-    return $found_address;
-  }
-}
-
-1;

mozilla/webtools/bugzilla/contrib/README

@@ -1,22 +0,0 @@
-This directory contains contributed software related to Bugzilla.
-Things in here have not necessarily been tested or tried by anyone
-except the original contributor, so tred carefully.  But it may still
-be useful to you.
-
-This directory includes:
-
-  mysqld-watcher.pl --  This script can be installed as a frequent cron 
-                        job to clean up stalled/dead queries.
-        gnats2bz.pl --  A perl script to help import bugs from a GNATS 
-                        database into a Bugzilla database.  Contributed by
-                        Tom Schutter <tom@platte.com>
-
-       bug_email.pl --  A perl script that can receive email containing
-                        bug reports (email-interface). Contributed by
-                        Klaas Freitag <freitag@SuSE.de>
-	
-      README.Mailif --  Readme describing the mail interface.
-  bugmail_help.html --  User help page for the mail interface.
-
-       yp_nomail.sh --  Script you can run via cron that regularly updates
-                        the nomail file for terminated employees 

mozilla/webtools/bugzilla/contrib/README.Mailif

@@ -1,80 +0,0 @@
-
-The Bugzilla Mail interface
-===========================
-
-(UPDATE 03/14/00 to better reflect reality by SML)
-
-The Bugzilla Mail interface allows to submit bugs to Bugzilla by email.
-
-The Mail Interface Contribution consists of three files:
-README.Mailif - this readme.
-bug_email.pl  - the script
-bugmail_help.html - a user help html site
-
-Installation:
-
-Next is to add a user who receives the bugmails, e. g. bugmail. Create a 
-mail account and a home directory for the user. 
-
-The mailinterface script bug_email.pl needs to get the mail through stdin.
-I use procmail for that, with the following line in the .procmailrc:
-
-BUGZILLA_HOME=/usr/local/httpd/htdocs/bugzilla
-:0 c
-|(cd $BUGZILLA_HOME/contrib; ./bug_email.pl)
-
-This defines the Bugzilla directory as the variable BUGZILLA_HOME and passes
-all incoming mail to the script after cd'ing into the bugzilla home.
-
-In some cases, it is necessary to alter the headers of incoming email.  The 
-additional line to procmail :
-
-:0 fhw
-| formail -I "From " -a "From "
-
-fixes many problems.
-
-See bugzilla.procmailrc for a sample procmailrc that works for me (SML) and
-also deals with bugzilla_email_append.pl
-
-Customation:
-
-There are some values inside the script which need to be customized for your
-needs:
-
-1. In sub-routine Reply (search 'sub Reply':
-there is the line
-    print MAIL "From: Bugzilla Mailinterface<yourmail\@here.com>\n";
-                                            ^^^^^^^^^^^^^^^^^^^^
-Fill in your correct mail here. That will make it easy for people to reply
-to the mail.
-
-2. check, if your sendmail resides in /usr/sbin/sendmail, change the path if neccessary.
-Search the script after 'default' - you find some default-Settings for bug
-reports, which are used, if the sender did not send a field for it. The defaults
-should be checked and changed.
-
-Thats hopefully all, we will come up with any configuration file or something.
-
-
-If your mail works, your script will insert mails from now on.
-
-The mailinterface supports two commandline switches:
-
-There are two command line switches :
-
--t: Testmode
-    The mailinterface does not really insert the bug into the database, but
-    writes some debug output to stdout and writes the mail into the file
-    bug_email_test.log in the data-dir.
-
--r: restricted mode
-    All lines before the first line with a keyword character are skipped.
-    In not restricted, default mode, these lines are added to the long 
-    description of the bug.
-
-
-02/2000 - Klaas Freitag, SuSE GmbH <freitag@suse.de>
-03/2000 - Seth M. Landsman <seth@cs.brandeis.edu>
- bug_email.pl now lives out of bugzilla/contrib
- added line about formail

mozilla/webtools/bugzilla/contrib/bugmail_help.html

@@ -1,223 +0,0 @@
-<HTML>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
-<!--
-     The contents of this file are subject to the Mozilla Public
-     License Version 1.1 (the "License"); you may not use this file
-     except in compliance with the License. You may obtain a copy of
-     the License at http://www.mozilla.org/MPL/
-    
-     Software distributed under the License is distributed on an "AS
-     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-     implied. See the License for the specific language governing
-     rights and limitations under the License.
-    
-     The Original Code is the Bugzilla Bug Tracking System.
-    
-     Contributor(s): Klaas Freitag <Freitag@SuSE.de>
--->
-
-<HEAD> <TITLE>Bugzilla Mail Interface</TITLE> </HEAD>
-<BODY BGCOLOR="#FFFFFF">
-<CENTER><H1>The Bugzilla Mail Interface</H1>
-Contributor: <A HREF="mailto:freitag@suse.de">Klaas Freitag</A>, SuSE GmbH 
-</CENTER>
-<P>
-The bugzilla Mail interface allows the registered bugzilla users to submit bugs by 
-sending email with a bug description. This is usefull for people, who do not work 
-inhouse and want to submitt bugs to the bugzilla system.
-<p>
-
-
-I know, show me the <A HREF="#examplemail">example-mail !</A>
-
-
-<H2>What do you need to do to submitt a bug by mail ?</H2>
-You need to send a email in the described format to the bugmail-user of the 
-bugzilla-system. This is <A HREF="mailto:our_bugzilla@xyz.com">yourbugzilla@here.com</A>
-
-You receive a reply mail with the new bug-ID if your request was ok. 
-If not, you get a mail with 
-some help on the bugmail system and a specific analysis of your request.
-<P>
-Please dont refuse to send one or two wrong mails, you will get all the information 
-you need in the replies, and <I>only</I> in the mail replies. The information on this
-page, concerning available products, versions and so on, is not dynamicly generated and 
-may  be old therefore.
-
-<H1>The Mail Format</H1>
-The bugmail needs a special format , which consists of some keywords and suitable 
-values for them and a description text. Note that the keyword block needs to be
-above of the description text.
-
-<H2>Keywords</H2>
-You need to tell bugzilla some properties of the bugs. This is done by keywords, which
-start on a new line with a @, followed by the keyword and and equal-sign, followed by a
-hopefully valid value.
-
-
-<TABLE BORDER=4 FRAME=box CELLSPACING="5" width=95%> <COLGROUP> <col width="2*"> 
-<col width="5*"> <col width="1*"> </COLGROUP>
-	<TR>
-		<TH>Keyword</TH>
-		<TH>Value description</TH>
-		<TH>required and default value</TH>
-	</TR>
-	<TR>
-	        <TD>@product</TD>
-	        <TD>The product which has a bug</TD>
-	        <TD>yes. <br> This is the most important information. Many other
-		fields depend on the product.</TD>
-	</TR>
-	<TR>
-	        <TD>@component</TD>
-	        <TD>the desired component which is affected by the bug</TD>
-	        <TD>yes. <br> As the @product, this is a very important 
-		field.</TD>
-	</TR>
-	<TR>
-	        <TD>@version</TD>
-	        <TD>The version of the product</TD>
-	        <TD>yes. <br>See @product and @component</TD>
-	</TR>
-	<TR>
-	        <TD>@short_desc</TD>
-	        <TD>A summary of your bug report</TD>
-	        <TD>yes. <br>This summary of the error you want to report 
-		describes what happen. You may skip the long description,
-		but not this summary.<br>
-		<b>Note:</b>The short description may be given in the mail subject
-		instead of using the keyword !</TD>
-	</TR>
-	<TR>
-	        <TD>@rep_platform</TD>
-	        <TD>The desired platform</TD>
-	        <TD>no.<br>If you dont give a value, this field is set to <I>All</I>.</TD>
-	</TR>
-	<TR>
-	        <TD>@bug_severity</TD>
-	        <TD>The severity of the bug</TD>
-	        <TD>no. <br> If you dont give a value, this field is set to 
-		<I>normal</I></TD>
-	</TR>
-	<TR>
-	        <TD>@priority</TD>
-	        <TD>The priority of the bug</TD>
-	        <TD>no.<br>If you dont give a value, this field is set to <I>P3</I></TD>
-	</TR>
-	<TR>
-	        <TD>@op_sys</TD>
-	        <TD>The operating system</TD>
-	        <TD>no.<br>If you dont give a value, this field is set to <I>Linux</I>.</TD>
-	</TR>
-	<TR>
-	        <TD>@assigned_to</TD>
-	        <TD>The one to whom the bug is assigned to</TD>
-	        <TD>no. <br>There is an initial owner for every product/version/component.
-		He owns the bug by default. The initial owner can only be found if 
-		product, version and component are valid.</TD>
-	</TR>
-	<TR>
-	        <TD>@bug_file_loc</TD>
-	        <TD>?</TD>
-	        <TD>no.</TD>
-	</TR>
-	<TR>
-	        <TD>@status_whiteboard</TD>
-	        <TD>?</TD>
-	        <TD>no.</TD>
-	</TR>
-	<TR>
-	        <TD>@target_milestone</TD>
-	        <TD>?</TD>
-	        <TD>no.</TD>
-	</TR>
-	<TR>
-	        <TD>@groupset</TD>
-	        <TD>rules the visibility of the bug.</TD>
-	        <TD>no.<br>This value defaults to the smallest of the available groups,
-		which is <I>readInternal</I>.</TD>
-	</TR>
-	<TR>
-	        <TD>@qa_contact</TD>
-	        <TD>the quality manager for the product</TD>
-	        <TD>no.<br>This value can be retrieved from product, component and 
-		version</TD>
-	</TR>
-
-</TABLE>
-<H2>Valid values</H2>
-Give string values for the most keys above. Some keywords  require special values:<br>
-<ol>
-<li>E-Mail adresses: If you want to set the qa-contact, specify a email-adress for @qa_contact. The email must be known by bugzilla of course.</li>
-<li>Listvalues: Most of the values have to be one of a list of valid values. Try by sending
-a mail and read the reply. Skip fields if you dont get help for them unless you dont know
-which values you may choose.</li>
-<li>free Text: The descriptions may be free text. </li>
-<li>Special: The field groupset may be specified in different in three different kinds:
- <ol>
-    <li> A plain numeric way, which is one usually huge number, e. g. <I>65536</I></li>
-    <li> a string with added numbers e.g. <I>65536+131072</I></li>
-    <li> a string list, e.g. <I>ReadInternal, ReadBeta </I></li>
- </ol>
-</li>
-</ol>
-
-<p>
-
-But most of them need <b>valid</b> values.
-<p>
-Sorry, you will not find lists of valid products, components and the other stuff
-here. Send a mail to with any text, and you will get a list of valid keywords in the reply.
-
-<p>
-Some of the values must be choosen from a list:<br>
-<ol>
-  <li>bug_severity: blocker, critical, major, normal, minor, trivial, enhancement</li>
-  <li>op_sys: Linux </li>
-  <li>priority: P1, P2, P3, P4, P5</li>
-  <li>rep_platform: All, i386, AXP, i686, Other</li></ol>
-  
-
-<p>
-
-After you have specified the required keywords and maybe some other value, you may 
-describe your bug. You dont need  a keyword for starting your bug description. All 
-text which follows the keyword block is handled as long description of the bug.
-<p>
-
-The bugmail interface is able to find required information by itself. E.g. if you specify
-a product which has exactly one component, this component will be found by the interface
-automatically. 
-
-<H1>Attachments</H1>
-
-The mail interface is able to cope with MIME-attachments. 
-People could for example add a logfile as a mail attachment, and it will appear in 
-bugzilla as attachment. A comment for the attachment should be added, it will describe
-the attachment in bugzilla.
-
-<H1><A NAME="examplemail">Example Mail</A></H1>
-
-See the example of the mail <b>body</b> (Dont forget to specify the short description
-in the mail subject):<hr><pre>
-
-  @product      = Bugzilla
-  @component    = general
-  @version      = All
-  @groupset     = ReadWorld ReadPartners
-  @op_sys       = Linux
-  @priority     = P3
-  @rep_platform = i386
-
-
-  This is the description of the bug I found. It is not neccessary to start
-  it with a keyword. 
-
-  Note: The short_description is neccessary and may be given with the keyword
-  @short_description or will be retrieved from the mail subject.
-
-
-</pre><hr>
-
-</BODY>
-</HTML>

mozilla/webtools/bugzilla/contrib/bugzilla.procmailrc

@@ -1,30 +0,0 @@
-:0 fhw
-| formail -I "From " -a "From "
-
-BUGZILLA_HOME=/home/bugzilla/WEB/bugzilla/contrib
-
-:0
-* ^Subject: .*\[Bug .*\]
-RESULT=|(cd $BUGZILLA_HOME && ./bugzilla_email_append.pl)
-
-
-# Feed mail to stdin of bug_email.pl
-:0 Ec
-#* !^Subject: .*[Bug .*]
-RESULT=|(cd $BUGZILLA_HOME && ./bug_email.pl )
-
-# write result to a logfile
-:0 c
-|echo `date '+%d.%m.%y %H:%M:  '` $RESULT >> $HOME/bug_email.log
-
-
-:0 c
-|echo "----------------------------------" >> $HOME/bug_email.log
-
-:0 c
-$HOME/bug_email.log
- 
-# Move mail to the inbox
-:0
-$HOME/Mail/INBOX
-

mozilla/webtools/bugzilla/contrib/bugzilla_email_append.pl

@@ -1,189 +0,0 @@
-#!/usr/bin/perl -w
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-
-# The purpose of this script is to take an email message, which
-# specifies a bugid and append it to the bug as part of the longdesc
-# table
-
-# Contributor : Seth M. Landsman <seth@dworkin.net>
-
-# 03/15/00 : Initial version by SML
-# 03/15/00 : processmail gets called
-
-# Email subject must be of format :
-# .* Bug ### .*
-# replying to a typical bugzilla email should be valid
-
-# TODO : 
-# 1. better way to get the body text (I don't know what dump_entity() is 
-#   actually doing
-
-use diagnostics;
-use strict;
-use MIME::Parser;
-
-push @INC, "../."; # this script lives in contrib
-require "globals.pl";
-require "BugzillaEmail.pm";
-
-# Create a new MIME parser:
-my $parser = new MIME::Parser;
-
-my $Comment = "";
-
-# Create and set the output directory:
-# FIXME: There should be a $BUGZILLA_HOME variable (SML)
-(-d "../data/mimedump-tmp") or mkdir "../data/mimedump-tmp",0755 or die "mkdir: $!";
-(-w "../data/mimedump-tmp") or die "can't write to directory";
-
-$parser->output_dir("../data/mimedump-tmp");
-    
-# Read the MIME message:
-my $entity = $parser->read(\*STDIN) or die "couldn't parse MIME stream";
-$entity->remove_sig(10);          # Removes the signature in the last 10 lines
-
-# Getting values from parsed mail
-my $Sender = $entity->get( 'From' );
-$Sender ||=  $entity->get( 'Reply-To' );
-my $Message_ID = $entity->get( 'Message-Id' );
-
-die (" *** Cant find Sender-adress in sent mail ! ***\n" ) unless defined( $Sender );
-chomp( $Sender );
-chomp( $Message_ID );
-
-print "Dealing with the sender $Sender\n";
-
-ConnectToDatabase();
-
-my $SenderShort = $Sender;
-$SenderShort =~ s/^.*?([a-zA-Z0-9_.-]+?\@[a-zA-Z0-9_.-]+\.[a-zA-Z0-9_.-]+).*$/$1/;
-
-$SenderShort = findUser($SenderShort);
-
-print "SenderShort is $SenderShort\n";
-if (!defined($SenderShort)) {
-  $SenderShort = $Sender;
-  $SenderShort =~ s/^.*?([a-zA-Z0-9_.-]+?\@[a-zA-Z0-9_.-]+\.[a-zA-Z0-9_.-]+).*$/$1/;
-}
-print "The sendershort is now $SenderShort\n";
-
-if (!defined($SenderShort)) {
-  DealWithError("No such user $SenderShort exists.");
-}
-
-my $Subject = $entity->get('Subject');
-print "The subject is $Subject\n";
-
-my ($bugid) = ($Subject =~ /\[Bug ([\d]+)\]/);
-print "The bugid is $bugid\n";
-
-# make sure the bug exists
-
-SendSQL("SELECT bug_id FROM bugs WHERE bug_id = $bugid;");
-my $found_id = FetchOneColumn();
-print "Did we find the bug? $found_id-\n";
-if (!defined($found_id)) {
-  DealWithError("Bug $bugid does not exist");
-}
-
-# get the user id
-SendSQL("SELECT userid FROM profiles WHERE login_name = \'$SenderShort\';");
-my $userid = FetchOneColumn();
-if (!defined($userid)) {
-  DealWithError("Userid not found for $SenderShort");
-}
-
-# parse out the text of the message
-dump_entity($entity);
-
-# Get rid of the bug id
-$Subject =~ s/\[Bug [\d]+\]//;
-#my $Comment = "This is only a test ...";
-my $Body = "Subject: " . $Subject . "\n" . $Comment;
-
-# shove it in the table
-my $long_desc_query = "INSERT INTO longdescs SET bug_id=$found_id, who=$userid, bug_when=NOW(), thetext=" . SqlQuote($Body) . ";";
-SendSQL($long_desc_query);
-
-system("cd .. ; ./processmail $found_id '$SenderShort'");
-
-sub DealWithError {
-  my ($reason) = @_;
-  print $reason . "\n";
-}
-
-# Yanking this wholesale from bug_email, 'cause I know this works.  I'll
-#  figure out what it really does later
-#------------------------------
-#
-# dump_entity ENTITY, NAME
-#
-# Recursive routine for parsing a mime coded mail.
-# One mail may contain more than one mime blocks, which need to be
-# handled. Therefore, this function is called recursively.
-#
-# It gets the for bugzilla important information from the mailbody and 
-# stores them into the global attachment-list @attachments. The attachment-list
-# is needed in storeAttachments.
-#
-sub dump_entity {
-    my ($entity, $name) = @_;
-    defined($name) or $name = "'anonymous'";
-    my $IO;
-
-
-    # Output the body:
-    my @parts = $entity->parts;
-    if (@parts) {                     # multipart...
-	my $i;
-	foreach $i (0 .. $#parts) {       # dump each part...
-	    dump_entity($parts[$i], ("$name, part ".(1+$i)));
-	}
-    } else {                            # single part...	
-
-	# Get MIME type, and display accordingly...
-	my $msg_part = $entity->head->get( 'Content-Disposition' );
-	
-	$msg_part ||= ""; 
-
-	my ($type, $subtype) = split('/', $entity->head->mime_type);
-	my $body = $entity->bodyhandle;
-	my ($data, $on_disk );
-
-	if(  $msg_part =~ /^attachment/ ) {
-	    # Attached File
-	    my $des = $entity->head->get('Content-Description');
-	    $des ||= "";
-
-	    if( defined( $body->path )) { # Data is on disk
-		$on_disk = 1;
-		$data = $body->path;
-		
-	    } else {                      # Data is in core
-		$on_disk = 0;
-		$data = $body->as_string;
-	    }
-#	    push ( @attachments, [ $data, $entity->head->mime_type, $on_disk, $des ] );
-	} else {
-	    # Real Message
-	    if ($type =~ /^(text|message)$/) {     # text: display it...
-		if ($IO = $body->open("r")) {
-		    $Comment .=  $_ while (defined($_ = $IO->getline));
-		    $IO->close;
-		} else {       # d'oh!
-		    print "$0: couldn't find/open '$name': $!";
-		}
-	    } else { print "Oooops - no Body !\n"; }
-	}
-    }
-}

mozilla/webtools/bugzilla/contrib/cmdline/buglist

@@ -1,94 +0,0 @@
-#!/bin/sh
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is 
-# Andreas Franke <afranke@ags.uni-sb.de>.
-# Corporation. Portions created by Andreas Franke are
-# Copyright (C) 2001 Andreas Franke. All
-# Rights Reserved.
-#
-# Contributor(s): 
-
-conf="`dirname $0`/query.conf"
-
-query="http://bugzilla.mozilla.org/buglist.cgi?cmd=doit"
-defaultcolumnlist="severity priority platform status resolution target_milestone status_whiteboard keywords summaryfull"
-
-chart=0
-and=0
-while test "$1" != ""; do
-    arg=$1
-    arg_len=`expr length ${arg}`
-    if test `expr substr "${arg}" 1 2` == "--"; then
-        eq_pos=`expr match ${arg} '--.*='`
-        if test "${eq_pos}" == "0"; then
-            echo 'Missing value for long option '"${arg}"' ("=" not found)' 1>&2
-            exit 1;
-        fi
-        # extract option name
-        let name_len=${eq_pos}-3
-        name=`expr substr ${arg} 3 ${name_len}`
-        # extract option value
-        let val_start=${eq_pos}+1
-        let val_len=${arg_len}-${eq_pos}
-        val=`expr substr ${arg} ${val_start} ${val_len}`
-    elif test `expr substr ${arg} 1 1` == "-" &&
-         test "`expr substr ${arg} 2 1`" != ""; then
-        # extract
-        name=`expr substr ${arg} 2 1`
-        let val_len=${arg_len}-2
-        val=`expr substr ${arg} 3 ${val_len}`
-    else
-        name="default"
-        val="${arg}"
-        #echo "Unrecognized option ${arg}" 1>&2
-        #exit 1
-    fi
-
-    # find field and comparison type for option ${name}
-    field=`grep '"'${name}'"' ${conf} | awk '{printf $1}'`
-    type=`grep '"'${name}'"' ${conf} | awk '{printf $2}'`
-    if test "${field}" == ""  || test "${type}" == ""; then
-        echo "Field name & comparison type not found for option ${name}." 1>&2
-        exit 1;
-    fi
-
-    or=0
-    while test "${val}" != ""; do
-        comma_idx=`expr index ${val} ,`
-        if test ${comma_idx} == "0"; then
-            val1="${val}"
-            val=""
-        else
-            let val1_len=${comma_idx}-1
-            val1=`expr substr ${val} 1 ${val1_len}`
-            val_len=`expr length ${val}`
-            let rest_start=${comma_idx}+1
-            let rest_len=${val_len}-${comma_idx}
-            val=`expr substr ${val} ${rest_start} ${rest_len}`
-        fi
-        query="${query}&field${chart}-${and}-${or}=${field}"
-        query="${query}&type${chart}-${and}-${or}=${type}"
-        query="${query}&value${chart}-${and}-${or}=${val1}"
-        #echo "----- ${name} : ${field} : ${type} : ${val1} -----" 1>&2
-        let or=${or}+1
-    done
-    let chart=${chart}+1
-    shift
-done
-
-outputfile="/dev/stdout"
-#outputfile="buglist.html"
-#\rm -f ${outputfile}
-wget -q -O ${outputfile} --header="Cookie: COLUMNLIST=${COLUMNLIST-${defaultcolumnlist}}" "${query}"
-

mozilla/webtools/bugzilla/contrib/cmdline/bugs

@@ -1,31 +0,0 @@
-#!/bin/sh
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is 
-# Andreas Franke <afranke@ags.uni-sb.de>.
-# Corporation. Portions created by Andreas Franke are
-# Copyright (C) 2001 Andreas Franke. All
-# Rights Reserved.
-#
-# Contributor(s): 
-
-buglist="`dirname $0`/buglist"
-htmlfile="`dirname $0`/buglist.html"
-
-${buglist} "$@" 2>&1 1>${htmlfile}
-if test ${?} == "0"; then
-    echo `grep 'TR VALIGN=TOP ALIGN=LEFT CLASS=' ${htmlfile} | sed -e 's/<TR.*id=//' | sed -e 's/".*//'` | sed -e 's/ /\,/g'
-else
-    cat ${htmlfile} 1>&2
-    exit 1
-fi

mozilla/webtools/bugzilla/contrib/cmdline/query.conf

@@ -1,49 +0,0 @@
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is 
-# Andreas Franke <afranke@ags.uni-sb.de>.
-# Corporation. Portions created by Andreas Franke are
-# Copyright (C) 2001 Andreas Franke. All
-# Rights Reserved.
-#
-# Contributor(s): 
-
-#
-# This is `query.conf', the config file for `buglist'.
-#
-# Columns: 1: field_name, 2: comparison_type, 3: cmd-line options
-#
-bug_status              substring       "s","status"
-resolution              substring       "r","resolution"
-rep_platform            substring       "p","platform"
-op_sys                  substring       "o","os","opsys"
-priority                substring       "p","priority"
-bug_severity            substring       "S","severity"
-assigned_to             substring       "A","O","owner","assignedto"
-reporter                substring       "R","reporter"
-qa_contact              substring       "Q","qa","qacontact"
-cc                      substring       "C","cc"
-product                 substring       "product"
-version                 substring       "V","version"
-component               substring       "c","component"
-target_milestone        substring       "M","milestone"
-short_desc              substring       "default","summary"
-longdesc                substring       "d","description","longdesc"
-bug_file_loc            substring       "u","url"
-status_whiteboard       substring       "w","whiteboard"
-keywords                substring       "k","K","keywords"
-attachments.description substring       "attachdesc"
-attachments.thedata     substring       "attachdata"
-attachments.mimetype    substring       "attachmime"
-dependson               substring       # bug 30823
-blocked                 substring       # bug 30823

mozilla/webtools/bugzilla/contrib/cvs-update.sh

@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Dawn Endico <endico@mozilla.org>
-
-
-# Keep a record of all cvs updates made from a given directory.
-#
-# Later, if changes need to be backed out, look at the log file
-# and run the cvs command with the date that you want to back
-# out to. (Probably the second to last entry).
-
-#DATE=`date +%e/%m/%Y\ %k:%M:%S\ %Z`
-DATE=`date`
-COMMAND="cvs update -d -P -D" 
-echo $COMMAND \"$DATE\" >> cvs-update.log
-$COMMAND "$DATE"
-
-
-# sample log file
-#cvs update -P -D "11/04/2000 20:22:08 PDT"
-#cvs update -P -D "11/05/2000 20:22:22 PDT"
-#cvs update -P -D "11/07/2000 20:26:29 PDT"
-#cvs update -P -D "11/08/2000 20:27:10 PDT"

mozilla/webtools/bugzilla/contrib/jb2bz.py

@@ -1,303 +0,0 @@
-#!/usr/local/bin/python
-# -*- mode: python -*-
-
-"""
-jb2bz.py - a nonce script to import bugs from JitterBug to Bugzilla
-Written by Tom Emerson, tree@basistech.com
-
-This script is provided in the hopes that it will be useful.  No
-rights reserved. No guarantees expressed or implied. Use at your own
-risk. May be dangerous if swallowed. If it doesn't work for you, don't
-blame me. It did what I needed it to do.
-
-This code requires a recent version of Andy Dustman's MySQLdb interface,
-
-    http://sourceforge.net/projects/mysql-python
-
-Share and enjoy.
-"""
-
-import rfc822, mimetools, multifile, mimetypes
-import sys, re, glob, StringIO, os, stat, time
-import MySQLdb, getopt
-
-# mimetypes doesn't include everything we might encounter, yet.
-if not mimetypes.types_map.has_key('.doc'):
-    mimetypes.types_map['.doc'] = 'application/msword'
-
-if not mimetypes.encodings_map.has_key('.bz2'):
-    mimetypes.encodings_map['.bz2'] = "bzip2"
-
-bug_status='NEW'
-component="default"
-version=""
-product="" # this is required, the rest of these are defaulted as above
-
-"""
-Each bug in JitterBug is stored as a text file named by the bug number.
-Additions to the bug are indicated by suffixes to this:
-
-<bug>
-<bug>.followup.*
-<bug>.reply.*
-<bug>.notes
-
-The dates on the files represent the respective dates they were created/added.
-
-All <bug>s and <bug>.reply.*s include RFC 822 mail headers. These could include
-MIME file attachments as well that would need to be extracted.
-
-There are other additions to the file names, such as
-
-<bug>.notify
-
-which are ignored.
-
-Bugs in JitterBug are organized into directories. At Basis we used the following
-naming conventions:
-
-<product>-bugs         Open bugs
-<product>-requests     Open Feature Requests
-<product>-resolved     Bugs/Features marked fixed by engineering, but not verified
-<product>-verified     Resolved defects that have been verified by QA
-
-where <product> is either:
-
-<product-name>
-
-or
-
-<product-name>-<version>
-"""
-
-def process_notes_file(current, fname):
-    try:
-        new_note = {}
-        notes = open(fname, "r")
-        s = os.fstat(notes.fileno())
-
-        new_note['text']  = notes.read()
-        new_note['timestamp'] = time.gmtime(s[stat.ST_MTIME])
-
-        notes.close()
-
-        current['notes'].append(new_note)
-
-    except IOError:
-        pass
-
-def process_reply_file(current, fname):
-    new_note = {}
-    reply = open(fname, "r")
-    msg = rfc822.Message(reply)
-    new_note['text'] = "%s\n%s" % (msg['From'], msg.fp.read())
-    new_note['timestamp'] = rfc822.parsedate_tz(msg['Date'])
-    current["notes"].append(new_note)
-
-def add_notes(current):
-    """Add any notes that have been recorded for the current bug."""
-    process_notes_file(current, "%d.notes" % current['number'])
-
-    for f in glob.glob("%d.reply.*" % current['number']):
-        process_reply_file(current, f)
-
-    for f in glob.glob("%d.followup.*" % current['number']):
-        process_reply_file(current, f)
-
-def maybe_add_attachment(current, file, submsg):
-    """Adds the attachment to the current record"""
-    cd = submsg["Content-Disposition"]
-    m = re.search(r'filename="([^"]+)"', cd)
-    if m == None:
-        return
-    attachment_filename = m.group(1)
-    if (submsg.gettype() == 'application/octet-stream'):
-        # try get a more specific content-type for this attachment
-        type, encoding = mimetypes.guess_type(m.group(1))
-        if type == None:
-            type = submsg.gettype()
-    else:
-        type = submsg.gettype()
-
-    try:
-        data = StringIO.StringIO()
-        mimetools.decode(file, data, submsg.getencoding())
-    except:
-        return
-
-    current['attachments'].append( ( attachment_filename, type, data.getvalue() ) )
-
-def process_mime_body(current, file, submsg):
-    data = StringIO.StringIO()
-    mimetools.decode(file, data, submsg.getencoding())
-    current['description'] = data.getvalue()
-
-
-
-def process_text_plain(msg, current):
-    print "Processing: %d" % current['number']
-    current['description'] = msg.fp.read()
-
-def process_multi_part(file, msg, current):
-    print "Processing: %d" % current['number']
-    mf = multifile.MultiFile(file)
-    mf.push(msg.getparam("boundary"))
-    while mf.next():
-        submsg = mimetools.Message(file)
-        if submsg.has_key("Content-Disposition"):
-            maybe_add_attachment(current, mf, submsg)
-        else:
-            # This is the message body itself (always?), so process
-            # accordingly
-            process_mime_body(current, mf, submsg)
-
-def process_jitterbug(filename):
-    current = {}
-    current['number'] = int(filename)
-    current['notes'] = []
-    current['attachments'] = []
-    current['description'] = ''
-    current['date-reported'] = ()
-    current['short-description'] = ''
-    
-    file = open(filename, "r")
-    msg = mimetools.Message(file)
-
-    msgtype = msg.gettype()
-
-    add_notes(current)
-    current['date-reported'] = rfc822.parsedate_tz(msg['Date'])
-    current['short-description'] = msg['Subject']
-
-    if msgtype[:5] == 'text/':
-        process_text_plain(msg, current)
-    elif msgtype[:10] == "multipart/":
-        process_multi_part(file, msg, current)
-    else:
-        # Huh? This should never happen.
-        print "Unknown content-type: %s" % msgtype
-        sys.exit(1)
-
-    # At this point we have processed the message: we have all of the notes and
-    # attachments stored, so it's time to add things to the database.
-    # The schema for JitterBug 2.14 can be found at:
-    #
-    #    http://www.trilobyte.net/barnsons/html/dbschema.html
-    #
-    # The following fields need to be provided by the user:
-    #
-    # bug_status
-    # product
-    # version
-    # reporter
-    # component
-    # resolution
-
-    # change this to the user_id of the Bugzilla user who is blessed with the
-    # imported defects
-    reporter=6
-
-    # the resolution will need to be set manually
-    resolution=""
-
-    db = MySQLdb.connect(db='bugs',user='root',host='localhost')
-    cursor = db.cursor()
-
-    cursor.execute( "INSERT INTO bugs SET " \
-                    "bug_id=%s," \
-                    "bug_severity='normal',"  \
-                    "bug_status=%s," \
-                    "creation_ts=%s,"  \
-                    "short_desc=%s," \
-                    "product=%s," \
-                    "rep_platform='All'," \
-                    "assigned_to=%s,"
-                    "reporter=%s," \
-                    "version=%s,"  \
-                    "component=%s,"  \
-                    "resolution=%s",
-                    [ current['number'],
-                      bug_status,
-                      time.strftime("%Y-%m-%d %H:%M:%S", current['date-reported'][:9]),
-                      current['short-description'],
-                      product,
-                      reporter,
-                      reporter,
-                      version,
-                      component,
-                      resolution] )
-
-    # This is the initial long description associated with the bug report
-    cursor.execute( "INSERT INTO longdescs VALUES (%s,%s,%s,%s)",
-                    [ current['number'],
-                      reporter,
-                      time.strftime("%Y-%m-%d %H:%M:%S", current['date-reported'][:9]),
-                      current['description'] ] )
-
-    # Add whatever notes are associated with this defect
-    for n in current['notes']:
-        cursor.execute( "INSERT INTO longdescs VALUES (%s,%s,%s,%s)",
-                        [current['number'],
-                         reporter,
-                         time.strftime("%Y-%m-%d %H:%M:%S", n['timestamp'][:9]),
-                         n['text']])
-
-    # add attachments associated with this defect
-    for a in current['attachments']:
-        cursor.execute( "INSERT INTO attachments SET " \
-                        "bug_id=%s, creation_ts=%s, description='', mimetype=%s," \
-                        "filename=%s, thedata=%s, submitter_id=%s",
-                        [ current['number'],
-                          time.strftime("%Y-%m-%d %H:%M:%S", current['date-reported'][:9]),
-                          a[1], a[0], a[2], reporter ])
-
-    cursor.close()
-    db.close()
-
-def usage():
-    print """Usage: jb2bz.py [OPTIONS] Product
-
-Where OPTIONS are one or more of the following:
-
-  -h                This help information.
-  -s STATUS         One of UNCONFIRMED, NEW, ASSIGNED, REOPENED, RESOLVED, VERIFIED, CLOSED
-                    (default is NEW)
-  -c COMPONENT      The component to attach to each bug as it is important. This should be
-                    valid component for the Product.
-  -v VERSION        Version to assign to these defects.
-
-Product is the Product to assign these defects to.
-
-All of the JitterBugs in the current directory are imported, including replies, notes,
-attachments, and similar noise.
-"""
-    sys.exit(1)
-
-
-def main():
-    global bug_status, component, version, product
-    opts, args = getopt.getopt(sys.argv[1:], "hs:c:v:")
-
-    for o,a in opts:
-        if o == "-s":
-            if a in ('UNCONFIRMED','NEW','ASSIGNED','REOPENED','RESOLVED','VERIFIED','CLOSED'):
-                bug_status = a
-        elif o == '-c':
-            component = a
-        elif o == '-v':
-            version = a
-        elif o == '-h':
-            usage()
-
-    if len(args) != 1:
-        sys.stderr.write("Must specify the Product.\n")
-        sys.exit(1)
-
-    product = args[0]
-
-    for bug in filter(lambda x: re.match(r"\d+$", x), glob.glob("*")):
-        process_jitterbug(bug)
-        
-
-if __name__ == "__main__":
-    main()

mozilla/webtools/bugzilla/contrib/mysqld-watcher.pl

@@ -1,102 +0,0 @@
-#!/usr/bonsaitools/bin/perl -w
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Bugzilla Bug Tracking System.
-# 
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 2000 Netscape Communications Corporation.  All
-# Rights Reserved.
-# 
-# Contributor(s): Dan Mosedale <dmose@mozilla.org>
-#
-
-# mysqld-watcher.pl - a script that watches the running instance of
-# mysqld and kills off any long-running SELECTs against the shadow_db
-# 
-use diagnostics;
-use strict;
-
-require "globals.pl";
-
-# some configurables: 
-
-# length of time before a thread is eligible to be killed, in seconds
-#
-my $long_query_time = 600;
-#
-# the From header for any messages sent out
-#
-my $mail_from = "root\@lounge.mozilla.org";
-#
-# mail transfer agent.  this should probably really be converted to a Param().
-#
-my $mta_program = "/usr/lib/sendmail -t -ODeliveryMode=deferred";
-
-# and STDIN is where we get the info about running threads
-#
-close(STDIN);
-open(STDIN, "/usr/bonsaitools/bin/mysqladmin processlist |");
-
-# iterate through the running threads
-#
-my @LONGEST = (0,0,0,0,0,0,0,0,0);
-while ( <STDIN> ) { 
-    my @F = split(/\|/);
-
-    # if this line is not the correct number of fields, or if the thread-id
-    # field contains Id, skip this line.  both these cases indicate that this
-    # line contains pretty-printing gunk and not thread info.
-    #
-    next if ( $#F != 9 || $F[1] =~ /Id/); 
-
-    if ( $F[4] =~ /shadow_bugs/             # shadowbugs database in use
-         && $F[5] =~ /Query/                # this is actually a query
-         && $F[6] > $long_query_time        # this query has taken too long
-         && $F[8] =~ /(select|SELECT)/      # only kill a select
-         && $F[6] > $LONGEST[6] ) {         # the longest running query seen
-        @LONGEST = @F;
-    }
-}
-
-# send an email message
-#
-# should perhaps be moved to somewhere more global for use in bugzilla as a 
-# whole; should also do more error-checking
-#
-sub sendEmail($$$$) {
-    ($#_ == 3) || die("sendEmail: invalid number of arguments");
-    my ($from, $to, $subject, $body) = @_;
-
-    open(MTA, "|$mta_program");
-    print MTA "From: $from\n";
-    print MTA "To: $to\n";
-    print MTA "Subject: $subject\n";
-    print MTA "\n";
-    print MTA $body;
-    print MTA "\n";
-    close(MTA);
-   
-}
-
-# if we found anything, kill the database thread and send mail about it
-#
-if ($LONGEST[6] != 0) {
-
-    system ("/usr/bonsaitools/bin/mysqladmin", "kill", $LONGEST[1]);
-
-    # fire off an email telling the maintainer that we had to kill a thread
-    #
-    sendEmail($mail_from, Param("maintainer"), 
-	     "long running MySQL thread killed",
-	     join(" ", @LONGEST) . "\n");
-}

mozilla/webtools/bugzilla/contrib/yp_nomail.sh

@@ -1,78 +0,0 @@
-#!/bin/sh
-# -*- Mode: ksh -*-
-##############################################################################
-# $Id: yp_nomail.sh,v 1.1 2000-09-12 23:50:31 cyeh%bluemartini.com Exp $
-# yp_nomail
-#
-# Our mail admins got annoyed when bugzilla kept sending email
-# to people who'd had bugzilla entries and left the company.  They
-# were no longer in the list of valid email users so it'd bounce.
-# Maintaining the 'data/nomail' file was a pain.  Luckily, our UNIX
-# admins list all the users that ever were, but the people who've left
-# have a distinct marker in their password file. For example:
-#
-# fired:*LK*:2053:1010:You're Fired Dude:/home/loser:/bin/false
-#
-# This script takes advantage of the "*LK*" convention seen via 
-# ypcat passwd and dumps those people into the nomail file. Any
-# manual additions are kept in a "nomail.(domainname)" file and 
-# appended to the list of yp lockouts every night via Cron
-#
-# 58 23 * * * /export/bugzilla/contrib/yp_nomail.sh > /dev/null 2>&1
-#
-# Tak ( Mark Takacs ) 08/2000
-#
-# XXX: Maybe should crosscheck w/bugzilla users?
-##############################################################################
-
-####
-# Configure this section to suite yer installation
-####
-
-DOMAIN=`domainname`
-MOZILLA_HOME="/export/mozilla"
-BUGZILLA_HOME="${MOZILLA_HOME}/bugzilla"
-NOMAIL_DIR="${BUGZILLA_HOME}/data"
-NOMAIL="${NOMAIL_DIR}/nomail"
-NOMAIL_ETIME="${NOMAIL}.${DOMAIN}"
-NOMAIL_YP="${NOMAIL}.yp"
-FIRED_FLAG="\*LK\*"
-
-YPCAT="/usr/bin/ypcat"
-GREP="/usr/bin/grep"
-SORT="/usr/bin/sort"
-
-########################## no more config needed  #################
-
-# This dir comes w/Bugzilla. WAY too paranoid
-if [ ! -d ${NOMAIL_DIR} ] ; then
-    echo "Creating $date_dir"
-    mkdir -p ${NOMAIL_DIR}
-fi
-
-#
-# Do some (more) paranoid checking
-#
-touch ${NOMAIL}
-if [ ! -w ${NOMAIL} ] ; then
-    echo "Can't write nomail file: ${NOMAIL} -- exiting"
-    exit
-fi
-if [ ! -r ${NOMAIL_ETIME} ] ; then
-    echo "Can't access custom nomail file: ${NOMAIL_ETIME} -- skipping"
-    NOMAIL_ETIME=""
-fi
-
-#
-# add all the people with '*LK*' password to the nomail list
-# XXX: maybe I should customize the *LK* string. Doh.
-#
-
-LOCKOUT=`$YPCAT passwd | $GREP "${FIRED_FLAG}" | cut -d: -f1 | sort > ${NOMAIL_YP}`
-`cat ${NOMAIL_YP} ${NOMAIL_ETIME} > ${NOMAIL}`
-
-exit
-
-
-# end
-

mozilla/webtools/bugzilla/createaccount.cgi

@@ -1,88 +0,0 @@
-#!/usr/bonsaitools/bin/perl -wT
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-#                 David Gardiner <david.gardiner@unisa.edu.au>
-#                 Joe Robins <jmrobins@tgix.com>
-#                 Christopher Aillon <christopher@aillon.com>
-#                 Gervase Markham <gerv@gerv.net>
-
-use diagnostics;
-use strict;
-
-use lib qw(.);
-
-require "CGI.pl";
-require "globals.pl";
-
-# Shut up misguided -w warnings about "used only once":
-use vars qw(
-  %FORM
-  $template
-  $vars
-);
-
-ConnectToDatabase();
-
-# If we're using LDAP for login, then we can't create a new account here.
-if(Param('useLDAP')) {
-  DisplayError("This site is using LDAP for authentication.  Please contact 
-                an LDAP administrator to get a new account created.",
-               "Can't create LDAP accounts");
-  PutFooter();
-  exit;
-}
-
-# Clear out the login cookies.  Make people log in again if they create an
-# account; otherwise, they'll probably get confused.
-my $cookiepath = Param("cookiepath");
-print "Set-Cookie: Bugzilla_login= ; path=$cookiepath; expires=Sun, 30-Jun-80 00:00:00 GMT
-Set-Cookie: Bugzilla_logincookie= ; path=$cookiepath; expires=Sun, 30-Jun-80 00:00:00 GMT\n";
-
-print "Content-Type: text/html\n\n";
-
-my $login = $::FORM{'login'};
-my $realname = trim($::FORM{'realname'});
-
-if (defined($login)) {
-    # We've been asked to create an account.
-    CheckEmailSyntax($login);
-    trick_taint($login);
-    $vars->{'login'} = $login;
-    
-    if (!ValidateNewUser($login)) {
-        # Account already exists        
-        $template->process("account/exists.html.tmpl", $vars)
-          || ThrowTemplateError($template->error());
-        exit;
-    }
-    
-    # Create account
-    my $password = InsertNewUser($login, $realname);
-    MailPassword($login, $password);
-    
-    $template->process("account/created.html.tmpl", $vars)
-      || ThrowTemplateError($template->error());
-    exit;
-}
-
-# Show the standard "would you like to create an account?" form.
-$template->process("account/create.html.tmpl", $vars)
-  || ThrowTemplateError($template->error());

mozilla/webtools/bugzilla/css/buglist.css

@@ -1,38 +0,0 @@
-/* The contents of this file are subject to the Mozilla Public
-  * License Version 1.1 (the "License"); you may not use this file
-  * except in compliance with the License. You may obtain a copy of
-  * the License at http://www.mozilla.org/MPL/
-  *
-  * Software distributed under the License is distributed on an "AS
-  * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-  * implied. See the License for the specific language governing
-  * rights and limitations under the License.
-  *
-  * The Original Code is the Bugzilla Bug Tracking System.
-  *
-  * The Initial Developer of the Original Code is Netscape Communications
-  * Corporation. Portions created by Netscape are
-  * Copyright (C) 1998 Netscape Communications Corporation. All
-  * Rights Reserved.
-  *
-  * Contributor(s): Myk Melez <myk@mozilla.org>
-  */
-
-/* Right align bug IDs. */
-.bz_id_column { text-align: right; }
-
-/* Style bug rows according to severity. */
-.bz_blocker { color: red; font-weight: bold; }
-.bz_critical { color: red; }
-.bz_enhancement { font-style: italic; }
-
-/* Style secure bugs if the installation is not using bug groups.
- * Installations that *are* using bug groups are likely to be using
- * them for almost all bugs, in which case special styling is not
- * informative and generally a nuisance.
- */
-.bz_secure { color: black; background-color: lightgrey; }
-
-/* Align columns in the "change multiple bugs" form to the right. */
-table#form tr th { text-align: right; }
-

mozilla/webtools/bugzilla/css/panel.css

@@ -1,37 +0,0 @@
-body
-  {
-    font-family:       sans-serif;
-    font-size:        10pt;
-    background-color:  white;
-  }
-
-ul
-  {
-    padding-left: 12px;
-  }
-
-radio
-  {
-    -moz-user-select: ignore;
-  }
-
-.text-link
-  {
-    margin-left:      3px;
-  }
-
-.text-link:hover
-  {
-    text-decoration:  underline;
-    cursor:           pointer;
-  }
-
-.descriptive-content
-  {
-    color:            #AAAAAA;
-  }
-
-.descriptive-content[focused=true]
-  {
-    color:            black;
-  }

mozilla/webtools/bugzilla/defparams.pl

@@ -1,601 +0,0 @@
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-#                 Dawn Endico <endico@mozilla.org>
-#                 Dan Mosedale <dmose@mozilla.org>
-#                 Joe Robins <jmrobins@tgix.com>
-#                 Jake <jake@acutex.net>
-#
-
-# This file defines all the parameters that we have a GUI to edit within
-# Bugzilla.
-
-# ATTENTION!!!!   THIS FILE ONLY CONTAINS THE DEFAULTS.
-# You cannot change your live settings by editing this file.
-# Only adding new parameters is done here.  Once the parameter exists, you 
-# must use %baseurl%/editparams.cgi from the web to edit the settings.
-
-use diagnostics;
-use strict;
-
-# Shut up misguided -w warnings about "used only once".  For some reason,
-# "use vars" chokes on me when I try it here.
-
-sub defparams_pl_sillyness {
-    my $zz;
-    $zz = %::param_checker;
-    $zz = %::param_desc;
-    $zz = %::param_type;
-}
-
-sub WriteParams {
-    foreach my $i (@::param_list) {
-        if (!defined $::param{$i}) {
-            $::param{$i} = $::param_default{$i};
-            if (!defined $::param{$i}) {
-                die "No default parameter ever specified for $i";
-            }
-        }
-    }
-
-    my $tmpname = "data/params.$$";
-    open(FID, ">$tmpname") || die "Can't create $tmpname";
-    my $v = $::param{'version'};
-    delete $::param{'version'};  # Don't write the version number out to
-                                # the params file.
-    print FID GenerateCode('%::param');
-    $::param{'version'} = $v;
-    print FID "1;\n";
-    close FID;
-    rename $tmpname, "data/params" || die "Can't rename $tmpname to data/params";
-    ChmodDataFile('data/params', 0666);
-}
-    
-
-sub DefParam {
-    my ($id, $desc, $type, $default, $checker) = (@_);
-    push @::param_list, $id;
-    $::param_desc{$id} = $desc;
-    $::param_type{$id} = $type;
-    $::param_default{$id} = $default;
-    if (defined $checker) {
-        $::param_checker{$id} = $checker;
-    }
-}
-
-
-sub check_numeric {
-    my ($value) = (@_);
-    if ($value !~ /^[0-9]+$/) {
-        return "must be a numeric value";
-    }
-    return "";
-}
-    
-sub check_shadowdb {
-    my ($value) = (@_);
-    $value = trim($value);
-    if ($value eq "") {
-        return "";
-    }
-    SendSQL("SHOW DATABASES");
-    while (MoreSQLData()) {
-        my $n = FetchOneColumn();
-        if (lc($n) eq lc($value)) {
-            return "The $n database already exists.  If that's really the name you want to use for the backup, please CAREFULLY make the existing database go away somehow, and then try again.";
-        }
-    }
-    SendSQL("CREATE DATABASE $value");
-    SendSQL("INSERT INTO shadowlog (command) VALUES ('SYNCUP')", 1);
-    return "";
-}
-
-@::param_list = ();
-
-
-
-# OK, here are the definitions themselves.
-#
-# The type of parameters (the third parameter to DefParam) can be one
-# of the following:
-#
-# t -- A short text entry field (suitable for a single line)
-# l -- A long text field (suitable for many lines)
-# b -- A boolean value (either 1 or 0)
-
-DefParam("maintainer",
-         "The email address of the person who maintains this installation of Bugzilla.",
-         "t",
-         'THE MAINTAINER HAS NOT YET BEEN SET');
-
-DefParam("urlbase",
-         "The URL that is the common initial leading part of all Bugzilla URLs.",
-         "t",
-         "http://cvs-mirror.mozilla.org/webtools/bugzilla/",
-         \&check_urlbase);
-
-sub check_urlbase {
-    my ($url) = (@_);
-    if ($url !~ m:^http.*/$:) {
-        return "must be a legal URL, that starts with http and ends with a slash.";
-    }
-    return "";
-}
-
-DefParam("cookiepath", 
-  "Directory path under your document root that holds your Bugzilla installation. Make sure to begin with a /.",
-  "t",
-  "/");
-
-DefParam("usequip",
-        "If this is on, Bugzilla displays a silly quip at the beginning of buglists, and lets users add to the list of quips.",
-        "b",
-        1);
-
-# Added parameter - JMR, 2/16/00
-DefParam("usebuggroups",
-         "If this is on, Bugzilla will associate a bug group with each product in the database, and use it for querying bugs.",
-         "b",
-         0); 
-
-# Added parameter - JMR, 2/16/00
-DefParam("usebuggroupsentry",
-         "If this is on, Bugzilla will use product bug groups to restrict who can enter bugs.  Requires usebuggroups to be on as well.",
-         "b",
-         0); 
-
-DefParam("shadowdb",
-         "If non-empty, then this is the name of another database in which Bugzilla will keep a shadow read-only copy of everything.  This is done so that long slow read-only operations can be used against this db, and not lock up things for everyone else.  Turning on this parameter will create the given database; be careful not to use the name of an existing database with useful data in it!",
-         "t",
-         "",
-         \&check_shadowdb);
-
-DefParam("queryagainstshadowdb",
-         "If this is on, and the shadowdb is set, then queries will happen against the shadow database.",
-         "b",
-         0);
-         
-
-# Adding in four parameters for LDAP authentication.  -JMR, 7/28/00
-DefParam("useLDAP",
-         "Turn this on to use an LDAP directory for user authentication ".
-         "instead of the Bugzilla database.  (User profiles will still be ".
-         "stored in the database, and will match against the LDAP user by ".
-         "email address.)",
-         "b",
-         0);
-
-
-DefParam("LDAPserver",
-         "The name (and optionally port) of your LDAP server. (e.g. ldap.company.com, or ldap.company.com:portnum)",
-         "t",
-         "");
-
-
-DefParam("LDAPBaseDN",
-         "The BaseDN for authenticating users against. (e.g. \"ou=People,o=Company\")",
-         "t",
-         "");
-
-
-DefParam("LDAPmailattribute",
-         "The name of the attribute of a user in your directory that ".
-         "contains the email address.",
-         "t",
-         "mail");
-#End of LDAP parameters
-
-
-DefParam("mostfreqthreshold",
-         "The minimum number of duplicates a bug needs to show up on the <A HREF=\"duplicates.cgi\">most frequently reported bugs page</a>. If you have a large database and this page takes a long time to load, try increasing this number.",
-         "t",
-         "2");
-
-
-DefParam("mybugstemplate",
-         "This is the URL to use to bring up a simple 'all of my bugs' list for a user.  %userid% will get replaced with the login name of a user.",
-         "t",
-         "buglist.cgi?bug_status=NEW&amp;bug_status=ASSIGNED&amp;bug_status=REOPENED&amp;email1=%userid%&amp;emailtype1=exact&amp;emailassigned_to1=1&amp;emailreporter1=1");
-    
-
-DefParam("shutdownhtml",
-         "If this field is non-empty, then Bugzilla will be completely disabled and this text will be displayed instead of all the Bugzilla pages.",
-         "l",
-         "");
-
-DefParam("sendmailnow",
-         "If this is on, Bugzilla will tell sendmail to send any e-mail immediately. If you have a large number of users with a large amount of e-mail traffic, enabling this option may dramatically slow down Bugzilla. Best used for smaller installations of Bugzilla.",
-         "b",
-         0);
-
-DefParam("passwordmail",
-q{The email that gets sent to people to tell them their password.  Within
-this text, %mailaddress% gets replaced by the person's email address,
-%login% gets replaced by the person's login (usually the same thing), and
-%password% gets replaced by their password.  %<i>anythingelse</i>% gets
-replaced by the definition of that parameter (as defined on this page).},
-         "l",
-         q{From: bugzilla-daemon
-To: %mailaddress%
-Subject: Your Bugzilla password.
-
-To use the wonders of Bugzilla, you can use the following:
-
- E-mail address: %login%
-       Password: %password%
-
- To change your password, go to:
- %urlbase%userprefs.cgi
-});
-
-
-DefParam("newchangedmail",
-q{The email that gets sent to people when a bug changes.  Within this
-text, %to% gets replaced with the e-mail address of the person recieving
-the mail.  %bugid% gets replaced by the bug number.  %diffs% gets
-replaced with what's changed.  %neworchanged% is "New:" if this mail is
-reporting a new bug or empty if changes were made to an existing one.
-%summary% gets replaced by the summary of this bug. %reasonsheader% 
-is replaced by an abbreviated list of reasons why the user is getting the email,
-suitable for use in an email header (such as X-Bugzilla-Reason).
-%reasonsbody% is replaced by text that explains why the user is getting the email 
-in more user friendly text than %reasonsheader%.
-%<i>anythingelse</i>% gets replaced by the definition of 
-that parameter (as defined on this
-page).},
-         "l",
-"From: bugzilla-daemon
-To: %to%
-Subject: [Bug %bugid%] %neworchanged%%summary%
-X-Bugzilla-Reason: %reasonsheader%
-
-%urlbase%show_bug.cgi?id=%bugid%
-
-%diffs%
-
-
-
-%reasonsbody%");
-
-
-
-DefParam("whinedays",
-         "The number of days that we'll let a bug sit untouched in a NEW state before our cronjob will whine at the owner.",
-         "t",
-         7,
-         \&check_numeric);
-
-
-DefParam("whinemail",
-         "The email that gets sent to anyone who has a NEW bug that hasn't been touched for more than <b>whinedays</b>.  Within this text, %email% gets replaced by the offender's email address.  %userid% gets replaced by the offender's bugzilla login (which, in most installations, is the same as the email address.)  %<i>anythingelse</i>% gets replaced by the definition of that parameter (as defined on this page).<p> It is a good idea to make sure this message has a valid From: address, so that if the mail bounces, a real person can know that there are bugs assigned to an invalid address.",
-         "l",
-         q{From: %maintainer%
-To: %email%
-Subject: Your Bugzilla buglist needs attention.
-
-[This e-mail has been automatically generated.]
-
-You have one or more bugs assigned to you in the Bugzilla 
-bugsystem (%urlbase%) that require
-attention.
-
-All of these bugs are in the NEW state, and have not been touched
-in %whinedays% days or more.  You need to take a look at them, and 
-decide on an initial action.
-
-Generally, this means one of three things:
-
-(1) You decide this bug is really quick to deal with (like, it's INVALID),
-    and so you get rid of it immediately.
-(2) You decide the bug doesn't belong to you, and you reassign it to someone
-    else.  (Hint: if you don't know who to reassign it to, make sure that
-    the Component field seems reasonable, and then use the "Reassign bug to
-    owner of selected component" option.)
-(3) You decide the bug belongs to you, but you can't solve it this moment.
-    Just use the "Accept bug" command.
-
-To get a list of all NEW bugs, you can use this URL (bookmark it if you like!):
-
-    %urlbase%buglist.cgi?bug_status=NEW&assigned_to=%userid%
-
-Or, you can use the general query page, at
-%urlbase%query.cgi.
-
-Appended below are the individual URLs to get to all of your NEW bugs that 
-haven't been touched for a week or more.
-
-You will get this message once a day until you've dealt with these bugs!
-
-});
-
-
-
-DefParam("defaultquery",
-          "This is the default query that initially comes up when you submit a bug.  It's in URL parameter format, which makes it hard to read.  Sorry!",
-         "t",
-         "bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&emailassigned_to1=1&emailassigned_to2=1&emailreporter2=1&emailcc2=1&emailqa_contact2=1&order=%22Importance%22");
-
-
-DefParam("letsubmitterchoosepriority",
-         "If this is on, then people submitting bugs can choose an initial priority for that bug.  If off, then all bugs initially have the default priority selected below.",
-         "b",
-         1);
-
-
-sub check_priority {
-    my ($value) = (@_);
-    GetVersionTable();
-    if (lsearch(\@::legal_priority, $value) < 0) {
-        return "Must be a legal priority value: one of " .
-            join(", ", @::legal_priority);
-    }
-    return "";
-}
-
-DefParam("defaultpriority",
-         "This is the priority that newly entered bugs are set to.",
-         "t",
-         "P2",
-         \&check_priority);
-
-
-DefParam("usetargetmilestone",
-         "Do you wish to use the Target Milestone field?",
-         "b",
-         0);
-
-DefParam("nummilestones",
-         "If using Target Milestone, how many milestones do you wish to
-          appear?",
-         "t",
-         10,
-         \&check_numeric);
-
-DefParam("curmilestone",
-         "If using Target Milestone, Which milestone are we working toward right now?",
-         "t",
-         1,
-         \&check_numeric);
-
-DefParam("musthavemilestoneonaccept",
-         "If you are using Target Milestone, do you want to require that the milestone be set in order for a user to ACCEPT a bug?",
-         "b",
-         0);
-
-DefParam("useqacontact",
-         "Do you wish to use the QA Contact field?",
-         "b",
-         0);
-
-DefParam("usestatuswhiteboard",
-         "Do you wish to use the Status Whiteboard field?",
-         "b",
-         0);
-
-DefParam("usebrowserinfo",
-         "Do you want bug reports to be assigned an OS & Platform based on the browser
-          the user makes the report from?",
-         "b",
-         1);
-
-DefParam("usedependencies",
-         "Do you wish to use dependencies (allowing you to mark which bugs depend on which other ones)?",
-         "b",
-         1);
-
-DefParam("webdotbase",
-         "It is possible to show graphs of dependent bugs. You may set this parameter to
-any of the following:
-<ul>
-<li>A complete file path to \'dot\' (part of <a
-href=\"http://www.graphviz.org\">GraphViz</a>) will generate the graphs
-locally.</li>
-<li>A URL prefix pointing to an installation of the <a
-href=\"http://www.research.att.com/~north/cgi-bin/webdot.cgi\">webdot
-package</a> will generate the graphs remotely.</li>
-<li>A blank value will disable dependency graphing.</li>
-</ul>
-The default value is a publically-accessible webdot server.",
-         "t",
-         "http://www.research.att.com/~north/cgi-bin/webdot.cgi/%urlbase%",
-         \&check_webdotbase);
-
-sub check_webdotbase {
-    my ($value) = (@_);
-    $value = trim($value);
-    if ($value eq "") {
-        return "";
-    }
-    if($value !~ /^https?:/) {
-        if(! -x $value) {
-            return "The file path \"$value\" is not a valid executable.  Please specify the complete file path to 'dot' if you intend to generate graphs locally.";
-        }
-        # Check .htaccess allows access to generated images
-        if(-e "data/webdot/.htaccess") {
-            open HTACCESS, "data/webdot/.htaccess";
-            if(! grep(/png/,<HTACCESS>)) {
-                print "Dependency graph images are not accessible.\nDelete data/webdot/.htaccess and re-run checksetup.pl to rectify.\n";
-            }
-            close HTACCESS;
-        }
-    }
-    return "";
-}
-
-DefParam("expectbigqueries",
-         "If this is on, then we will tell mysql to <tt>set option SQL_BIG_TABLES=1</tt> before doing queries on bugs.  This will be a little slower, but one will not get the error <tt>The table ### is full</tt> for big queries that require a big temporary table.",
-         "b",
-         0);
-
-DefParam("emailregexp",
-         'This defines the regexp to use for legal email addresses.  The default tries to match fully qualified email addresses.  Another popular value to put here is <tt>^[^@]+$</tt>, which means "local usernames, no @ allowed."',
-         "t",
-         q:^[^@]+@[^@]+\\.[^@]+$:);
-
-DefParam("emailregexpdesc",
-         "This describes in english words what kinds of legal addresses are allowed by the <tt>emailregexp</tt> param.",
-         "l",
-         "A legal address must contain exactly one '\@', and at least one '.' after the \@.");
-
-DefParam("emailsuffix",
-         "This is a string to append to any email addresses when actually sending mail to that address.  It is useful if you have changed the <tt>emailregexp</tt> param to only allow local usernames, but you want the mail to be delivered to username\@my.local.hostname.",
-         "t",
-         "");
-
-
-DefParam("voteremovedmail",
-q{This is a mail message to send to anyone who gets a vote removed from a bug for any reason.  %to% gets replaced by the person who used to be voting for this bug.  %bugid% gets replaced by the bug number.  %reason% gets replaced by a short reason describing why the vote(s) were removed.  %votesremoved%, %votesold% and %votesnew% is the number of votes removed, before and after respectively.  %votesremovedtext%, %votesoldtext% and %votesnewtext% are these as sentences, eg "You had 2 votes on this bug."  %count% is also supported for backwards compatibility.  %<i>anythingelse</i>% gets replaced by the definition of that parameter (as defined on this page).},
-         "l",
-"From: bugzilla-daemon
-To: %to%
-Subject: [Bug %bugid%] Some or all of your votes have been removed.
-
-Some or all of your votes have been removed from bug %bugid%.
-
-%votesoldtext%
-
-%votesnewtext%
-
-Reason: %reason%
-
-%urlbase%show_bug.cgi?id=%bugid%
-");
-         
-DefParam("allowbugdeletion",
-         q{The pages to edit products and components and versions can delete all associated bugs when you delete a product (or component or version).  Since that is a pretty scary idea, you have to turn on this option before any such deletions will ever happen.},
-         "b",
-         0);
-
-
-DefParam("allowemailchange",
-         q{Users can change their own email address through the preferences.  Note that the change is validated by emailing both addresses, so switching this option on will not let users use an invalid address.},
-         "b",
-         0);
-
-
-DefParam("allowuserdeletion",
-         q{The pages to edit users can also let you delete a user.  But there is no code that goes and cleans up any references to that user in other tables, so such deletions are kinda scary.  So, you have to turn on this option before any such deletions will ever happen.},
-         "b",
-         0);
-
-DefParam("browserbugmessage",
-         "If bugzilla gets unexpected data from the browser, in addition to displaying the cause of the problem, it will output this HTML as well.",
-         "l",
-         "this may indicate a bug in your browser.\n");
-
-#
-# Parameters to force users to comment their changes for different actions.
-DefParam("commentonaccept", 
-         "If this option is on, the user needs to enter a short comment if he accepts the bug",
-         "b", 0 );
-DefParam("commentonclearresolution", 
-         "If this option is on, the user needs to enter a short comment if the bugs resolution is cleared",
-         "b", 0 );
-DefParam("commentonconfirm", 
-         "If this option is on, the user needs to enter a short comment when confirming a bug",
-         "b", 0 );
-DefParam("commentonresolve", 
-         "If this option is on, the user needs to enter a short comment if the bug is resolved",
-         "b", 0 );
-DefParam("commentonreassign", 
-         "If this option is on, the user needs to enter a short comment if the bug is reassigned",
-         "b", 0 );
-DefParam("commentonreassignbycomponent", 
-         "If this option is on, the user needs to enter a short comment if the bug is reassigned by component",
-         "b", 0 );
-DefParam("commentonreopen", 
-         "If this option is on, the user needs to enter a short comment if the bug is reopened",
-         "b", 0 );
-DefParam("commentonverify", 
-         "If this option is on, the user needs to enter a short comment if the bug is verified",
-         "b", 0 );
-DefParam("commentonclose", 
-         "If this option is on, the user needs to enter a short comment if the bug is closed",
-         "b", 0 );
-DefParam("commentonduplicate",
-         "If this option is on, the user needs to enter a short comment if the bug is marked as duplicate",
-         "b", 0 );
-DefParam("supportwatchers",
-         "Support one user watching (ie getting copies of all related email" .
-         " about) another's bugs.  Useful for people going on vacation, and" .
-         " QA folks watching particular developers' bugs",
-         "b", 0 );
-
-
-DefParam("move-enabled",
-         "If this is on, Bugzilla will allow certain people to move bugs to the defined database.",
-         "b",
-         0);
-DefParam("move-button-text",
-         "The text written on the Move button. Explain where the bug is being moved to.",
-         "t",
-         'Move To Bugscape');
-DefParam("move-to-url",
-         "The URL of the database we allow some of our bugs to be moved to.",
-         "t",
-         '');
-DefParam("move-to-address",
-         "To move bugs, an email is sent to the target database. This is the email address that database
-          uses to listen for incoming bugs.",
-         "t",
-         'bugzilla-import');
-DefParam("moved-from-address",
-         "To move bugs, an email is sent to the target database. This is the email address from which
-          this mail, and error messages are sent.",
-         "t",
-         'bugzilla-admin');
-DefParam("movers",
-         "A list of people with permission to move bugs and reopen moved bugs (in case the move operation fails).",
-         "t",
-         '');
-DefParam("moved-default-product",
-         "Bugs moved from other databases to here are assigned to this product.",
-         "t",
-         '');
-DefParam("moved-default-component",
-         "Bugs moved from other databases to here are assigned to this component.",
-         "t",
-         '');
-
-# The maximum size (in bytes) for patches and non-patch attachments.
-# The default limit is 1000KB, which is 24KB less than mysql's default
-# maximum packet size (which determines how much data can be sent in a
-# single mysql packet and thus how much data can be inserted into the
-# database) to provide breathing space for the data in other fields of
-# the attachment record as well as any mysql packet overhead (I don't
-# know of any, but I suspect there may be some.)
-
-DefParam("maxpatchsize",
-         "The maximum size (in kilobytes) of patches.  Bugzilla will not 
-          accept patches greater than this number of kilobytes in size.
-          To accept patches of any size (subject to the limitations of 
-          your server software), set this value to zero." ,
-         "t",
-         '1000');
-
-DefParam("maxattachmentsize" , 
-         "The maximum size (in kilobytes) of non-patch attachments.  Bugzilla 
-          will not accept attachments greater than this number of kilobytes 
-          in size.  To accept attachments of any size (subject to the
-          limitations of your server software), set this value to zero." , 
-         "t" , 
-         '1000');
-
-1;

mozilla/webtools/bugzilla/describecomponents.cgi

@@ -1,128 +0,0 @@
-#!/usr/bonsaitools/bin/perl -wT
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-#                 Bradley Baetz <bbaetz@student.usyd.edu.au>
-
-use vars qw(
-  %FORM
-  $userid
-);
-
-use diagnostics;
-use strict;
-
-use lib qw(.);
-
-require "CGI.pl";
-
-ConnectToDatabase();
-GetVersionTable();
-
-if (!defined $::FORM{'product'}) {
-    # Reference to a subset of %::proddesc, which the user is allowed to see
-    my %products;
-
-    if (Param("usebuggroups")) {
-        # OK, now only add products the user can see
-        confirm_login();
-        foreach my $p (@::legal_product) {
-            if (!GroupExists($p) || UserInGroup($p)) {
-                $products{$p} = $::proddesc{$p};
-            }
-        }
-    }
-    else {
-          %products = %::proddesc;
-    }
-
-    my $prodsize = scalar(keys %products);
-    if ($prodsize == 0) {
-        DisplayError("Either no products have been defined ".
-                     "or you have not been given access to any.\n");
-        exit;
-    }
-    elsif ($prodsize > 1) {
-        $::vars->{'proddesc'} = \%products;
-        $::vars->{'target'} = "describecomponents.cgi";
-        $::vars->{'title'} = "Bugzilla component description";
-        $::vars->{'h2'} = 
-          "Please specify the product whose components you want described.";
-
-        print "Content-type: text/html\n\n";
-        $::template->process("global/choose-product.html.tmpl", $::vars)
-          || ThrowTemplateError($::template->error());
-        exit;
-    }
-
-    $::FORM{'product'} = (keys %::proddesc)[0];
-}
-
-my $product = $::FORM{'product'};
-
-# Make sure the user specified a valid product name.  Note that
-# if the user specifies a valid product name but is not authorized
-# to access that product, they will receive a different error message
-# which could enable people guessing product names to determine
-# whether or not certain products exist in Bugzilla, even if they
-# cannot get any other information about that product.
-grep($product eq $_ , @::legal_product)
-  || DisplayError("The product name is invalid.")
-  && exit;
-
-# Make sure the user is authorized to access this product.
-if (Param("usebuggroups") && GroupExists($product) && !$::userid) {
-    confirm_login();
-    UserInGroup($product)
-      || DisplayError("You are not authorized to access that product.")
-        && exit;
-}
-
-######################################################################
-# End Data/Security Validation
-######################################################################
-
-my @components;
-SendSQL("SELECT value, initialowner, initialqacontact, description FROM " .
-        "components WHERE program = " . SqlQuote($product) . " ORDER BY " .
-        "value");
-while (MoreSQLData()) {
-    my ($name, $initialowner, $initialqacontact, $description) =
-      FetchSQLData();
-
-    my %component;
-
-    $component{'name'} = $name;
-    $component{'initialowner'} = $initialowner ?
-      DBID_to_name($initialowner) : '';
-    $component{'initialqacontact'} = $initialqacontact ?
-      DBID_to_name($initialqacontact) : '';
-    $component{'description'} = $description;
-
-    push @components, \%component;
-}
-
-$::vars->{'product'} = $product;
-$::vars->{'components'} = \@components;
-
-print "Content-type: text/html\n\n";
-$::template->process("reports/components.html.tmpl", $::vars)
-  || ThrowTemplateError($::template->error());
-

mozilla/webtools/bugzilla/describekeywords.cgi

@@ -1,58 +0,0 @@
-#!/usr/bonsaitools/bin/perl -wT
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is the Bugzilla Bug Tracking System.
-#
-# The Initial Developer of the Original Code is Terry Weissman.
-# Portions created by Terry Weissman are
-# Copyright (C) 2000 Terry Weissman. All
-# Rights Reserved.
-#
-# Contributor(s): Terry Weissman <terry@mozilla.org>
-# Contributor(s): Gervase Markham <gerv@gerv.net>
-
-use diagnostics;
-use strict;
-use lib ".";
-
-require "CGI.pl";
-
-# Use the global template variables. 
-use vars qw($vars $template);
-
-ConnectToDatabase();
-
-quietly_check_login();
-
-SendSQL("SELECT keyworddefs.name, keyworddefs.description, 
-                COUNT(keywords.bug_id)
-         FROM keyworddefs LEFT JOIN keywords ON keyworddefs.id=keywords.keywordid
-         GROUP BY keyworddefs.id, keyworddefs.name, keyworddefs.description, keywords.bug_id
-         ORDER BY keyworddefs.name");
-
-my @keywords;
-
-while (MoreSQLData()) {
-    my ($name, $description, $bugs) = FetchSQLData();
-   
-    push (@keywords, { name => $name, 
-                       description => $description,
-                       bugcount => $bugs });
-}
-   
-$vars->{'keywords'} = \@keywords;
-$vars->{'caneditkeywords'} = UserInGroup("editkeywords");
-
-print "Content-type: text/html\n\n";
-$template->process("reports/keywords.html.tmpl", $vars)
-  || ThrowTemplateError($template->error());

mozilla/webtools/bugzilla/docs/README.docs

@@ -1,149 +0,0 @@
-Welcome to the Bugzilla documentation project!
-You'll find these directories and files here:
-
-README.docs	# This README file
-html/		# The compiled HTML docs from SGML sources (do not edit)
-sgml/		# The original SGML doc sources (edit these)
-txt/		# The compiled text docs from SGML sources
-ps/		# The compiled PostScript docs from SGML sources
-pdf/		# The compiled Adobe PDF docs from SGML sources
-
-A note about SGML:
-  The documentation is written in DocBook 3.1/4.1 SGML, and attempts to adhere
-to the LinuxDoc standards everywhere applicable (http://www.linuxdoc.org).
-Please consult "The LDP Author Guide" at linuxdoc.org for details on how
-to set up your personal environment for compiling SGML files.
-  If you need to make corrections to typographical errors, or other minor
-editing duties, feel free to use any text editor to make the changes.  SGML
-is not rocket science -- simply make sure your text appears between 
-appropriate tags (like <para>This is a paragraph</para>) and we'll be fine.
-If you are making more extensive changes, please ensure you at least validate
-your SGML before checking it in with something like:
-	nsgmls -s Bugzilla-Guide.sgml
-
-  When you validate, please validate the master document (Bugzilla-Guide.sgml)
-as well as the document you edited to ensure there are no critical errors.
-The following errors are considered "normal" when validating with nsgmls:
-
- DTDDECL catalog entries are not supported
- "DOCTYPE" declaration not allowed in instance
-
-  The reason these occur is that free sgml validators do not yet support
-the DTDDECL catalog entries, and I've included DOCTYPE declarations in
-entities referenced from Bugzilla-Guide.sgml so these entities can compile
-individually, if necessary.  I suppose I ought to comment them out at some
-point, but for now they are convenient and don't hurt anything.
-
-  Thanks for taking the time to read these notes and consulting the
-documentation.  Please address comments and questions to the newsgroup:
-news://news.mozilla.org/netscape/public/mozilla/webtools .
-
-==========
-HOW TO SET UP YOUR OWN SGML EDITING ENVIRONMENT:
-==========
-
-Trying to set up an SGML/XML Docbook editing environment the 
-first time can be a daunting task.
-I use Linux-Mandrake, in part, because it has a fully-functional
-SGML/XML Docbook editing environment included as part of the
-distribution CD's.  If you have easier instructions for how to
-do this for a particular Linux distribution or platform, please
-let the team know at the mailing list: mozilla-webtools@mozilla.org.
-
-The following text is taken nearly verbatim from
-http://bugzilla.mozilla.org/show_bug.cgi?id=95970, where I gave
-these instructions to someone who wanted the greater manageability
-maintaining a document in Docbook brings:
-
-This is just off the top of my head, but here goes.  Note some of these may 
-NOT be necessary, but I don't think they hurt anything by being installed.
-
-rpms:
-
-openjade
-jadetex
-docbook-dtds
-docbook-style-dsssl
-docbook-style-dsssl-doc
-docbook-utils
-xemacs
-psgml
-sgml-tools
-sgml-common
-
-
-If you're getting these from RedHat, make sure you get the ones in the
-rawhide area.  The ones in the 7.2 distribution are too old and don't
-include the XML stuff.
-
-Download "ldp.dsl" from the Resources page on linuxdoc.org.  This is the 
-stylesheet I use to get the HTML and text output.  It works well, and has a 
-nice, consistent look with the rest of the linuxdoc documents.  You'll have to 
-adjust the paths in ldp.dsl at the top of the file to reflect the actual 
-locations of your docbook catalog files.  I created a directory, 
-/usr/share/sgml/docbook/ldp, and put the ldp.dsl file there.  I then edited 
-ldp.dsl and changed two lines near the top:
-<!ENTITY docbook.dsl SYSTEM "../dsssl-stylesheets/html/docbook.dsl" CDATA 
-dsssl>
-...and...
-<!ENTITY docbook.dsl SYSTEM "../dsssl-stylesheets/print/docbook.dsl" CDATA
-dsssl>
-
-Note the difference is the top one points to the HTML docbook stylesheet, 
-and the next one points to the PRINT docbook stylesheet.
-
-  You know, this sure looks awful involved.  Anyway, once you have this in
-place, add to your .bashrc:
-export SGML_CATALOG_FILES=/etc/sgml/catalog
-export LDP_HOME=/usr/share/sgml/docbook/ldp
-export JADE_PUB=/usr/share/doc/openjade-1.3.1/pubtext
-
-or in .tcshrc:
-setenv SGML_CATALOG_FILES /etc/sgml/catalog
-setenv LDP_HOME /usr/share/sgml/docbook/ldp
-setenv JADE_PUB /usr/share/doc/openjade-1.3.1/pubtext
-
-  If you have root access and want to set this up for anyone on your box,
-you can add those lines to /etc/profile for bash users and /etc/csh.login
-for tcsh users.
-
-  Make sure you edit the paths in the above environment variables if those
-folders are anywhere else on your system (for example, the openjade version
-might change if you get a new version at some point).
-
-  I suggest xemacs for editing your SGML/XML Docbook documents.  The darn
-thing just works, and generally includes PSGML mode by default.  Not to
-mention you can validate the SGML from right within it without having to
-remember the command-line syntax for nsgml (not that it's that hard
-anyway).  If not, you can download psgml at
-http://www.sourceforge.net/projects/psgml.
-
-==========
-NOTES:
-==========
-
-  Here are the commands I use to maintain this documentation.
-  You MUST have DocBook 4.1.2 set up correctly in order for this to work.
-
-To create HTML documentation:
-bash$ cd html
-bash$ jade -t sgml -i html -d $LDP_HOME/ldp.dsl\#html \
-$JADE_PUB/xml.dcl ../sgml/Bugzilla-Guide.sgml
-
-To create HTML documentation as a single big HTML file:
-bash$ cd html
-bash$ jade -V nochunks -t sgml -i html -d $LDP_HOME/ldp.dsl\#html \
-$JADE_PUB/xml.dcl ../sgml/Bugzilla-Guide.sgml >Bugzilla-Guide.html
-
-To create TXT documentation as a single big TXT file:
-bash$ cd txt
-bash$ lynx -dump -nolist ../html/Bugzilla-Guide.html >Bugzilla-Guide.txt
-
-
-Sincerely,
- Matthew P. Barnson
- The Bugzilla "Doc Knight"
- mbarnson@sisna.com
-
- with major edits by Dave Miller <justdave@syndicomm.com> based on
- experience setting this up on the Landfill test server.

mozilla/webtools/bugzilla/docs/html/about.html

@@ -1,178 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->About This Guide</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="NEXT"
-TITLE="Purpose and Scope of this Guide"
-HREF="aboutthisguide.html"></HEAD
-><BODY
-CLASS="chapter"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="index.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="aboutthisguide.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="chapter"
-><H1
-><A
-NAME="about">Chapter 1. About This Guide</H1
-><DIV
-CLASS="TOC"
-><DL
-><DT
-><B
->Table of Contents</B
-></DT
-><DT
->1.1. <A
-HREF="aboutthisguide.html"
->Purpose and Scope of this Guide</A
-></DT
-><DT
->1.2. <A
-HREF="copyright.html"
->Copyright Information</A
-></DT
-><DT
->1.3. <A
-HREF="disclaimer.html"
->Disclaimer</A
-></DT
-><DT
->1.4. <A
-HREF="newversions.html"
->New Versions</A
-></DT
-><DT
->1.5. <A
-HREF="credits.html"
->Credits</A
-></DT
-><DT
->1.6. <A
-HREF="translations.html"
->Translations</A
-></DT
-><DT
->1.7. <A
-HREF="conventions.html"
->Document Conventions</A
-></DT
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="aboutthisguide.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->The Bugzilla Guide</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Purpose and Scope of this Guide</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/aboutthisguide.html

@@ -1,184 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Purpose and Scope of this Guide</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="About This Guide"
-HREF="about.html"><LINK
-REL="PREVIOUS"
-TITLE="About This Guide"
-HREF="about.html"><LINK
-REL="NEXT"
-TITLE="Copyright Information"
-HREF="copyright.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="about.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Chapter 1. About This Guide</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="copyright.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="aboutthisguide">1.1. Purpose and Scope of this Guide</H1
-><P
->&#13;      Bugzilla is simply the best piece of bug-tracking software the
-      world has ever seen.  This document is intended to be the
-      comprehensive guide to  the installation, administration,
-      maintenance, and use of the Bugzilla bug-tracking system.
-    </P
-><P
->&#13;      This release of the Bugzilla Guide is the
-      <EM
->2.16</EM
-> release. It is so named that it
-      may match the current version of Bugzilla. The numbering
-      tradition stems from that used for many free software projects,
-      in which <EM
->even-numbered</EM
-> point releases (1.2,
-      1.14, etc.) are considered "stable releases", intended for
-      public consumption; on the other  hand,
-      <EM
->odd-numbered</EM
-> point releases (1.3, 2.09,
-      etc.) are considered unstable <EM
->development</EM
->
-      releases intended for advanced users, systems administrators,
-      developers, and those who enjoy a lot of pain. 
-    </P
-><P
->&#13;      Newer revisions of the Bugzilla Guide follow the numbering
-      conventions of the main-tree Bugzilla releases, available at
-      <A
-HREF="http://www.bugzilla.org/"
-TARGET="_top"
->http://www.bugzilla.org/</A
->.  Intermediate releases will have
-      a minor revision number following a period.  The current version
-      of Bugzilla, as of this writing (April 2nd, 2002) is 2.16; if
-      something were seriously wrong with that edition of the Guide,
-      subsequent releases would receive an additional dotted-decimal
-      digit to indicate the update (2.16.1, 2.16.2, etc.).
-      Got it?  Good.
-    </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="about.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="copyright.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->About This Guide</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="about.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Copyright Information</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/administration.html

@@ -1,233 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Administering Bugzilla</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Win32 Installation Notes"
-HREF="win32.html"><LINK
-REL="NEXT"
-TITLE="Post-Installation Checklist"
-HREF="postinstall-check.html"></HEAD
-><BODY
-CLASS="chapter"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="win32.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="postinstall-check.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="chapter"
-><H1
-><A
-NAME="administration">Chapter 4. Administering Bugzilla</H1
-><DIV
-CLASS="TOC"
-><DL
-><DT
-><B
->Table of Contents</B
-></DT
-><DT
->4.1. <A
-HREF="postinstall-check.html"
->Post-Installation Checklist</A
-></DT
-><DT
->4.2. <A
-HREF="useradmin.html"
->User Administration</A
-></DT
-><DD
-><DL
-><DT
->4.2.1. <A
-HREF="useradmin.html#defaultuser"
->Creating the Default User</A
-></DT
-><DT
->4.2.2. <A
-HREF="useradmin.html#manageusers"
->Managing Other Users</A
-></DT
-></DL
-></DD
-><DT
->4.3. <A
-HREF="programadmin.html"
->Product, Component, Milestone, and Version
-      Administration</A
-></DT
-><DD
-><DL
-><DT
->4.3.1. <A
-HREF="programadmin.html#products"
->Products</A
-></DT
-><DT
->4.3.2. <A
-HREF="programadmin.html#components"
->Components</A
-></DT
-><DT
->4.3.3. <A
-HREF="programadmin.html#versions"
->Versions</A
-></DT
-><DT
->4.3.4. <A
-HREF="programadmin.html#milestones"
->Milestones</A
-></DT
-><DT
->4.3.5. <A
-HREF="programadmin.html#voting"
->Voting</A
-></DT
-><DT
->4.3.6. <A
-HREF="programadmin.html#groups"
->Groups and Group Security</A
-></DT
-></DL
-></DD
-><DT
->4.4. <A
-HREF="security.html"
->Bugzilla Security</A
-></DT
-></DL
-></DIV
-><FONT
-COLOR="RED"
->&#13;    Or, I just got this cool thing installed.  Now what the heck do I
-    do with it?
-  </FONT
-><P
->&#13;    So you followed <SPAN
-CLASS="QUOTE"
->"<A
-HREF="installation.html"
->Bugzilla Installation</A
->"</SPAN
-> to the
-    letter, and logged into Bugzilla for the very first time with your
-    super-duper god account.  You sit, contentedly staring at the
-    Bugzilla Query Screen, the worst of the whole mad business of
-    installing this terrific program behind you. It seems, though, you
-    have nothing yet to query! Your first act of business should be to
-    setup the operating parameters for Bugzilla so you can get busy
-    getting data into your bug tracker.
-  </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="win32.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="postinstall-check.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Win32 Installation Notes</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Post-Installation Checklist</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/bonsai.html

@@ -1,160 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Bonsai</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="Integrating Bugzilla with Third-Party Tools"
-HREF="integration.html"><LINK
-REL="PREVIOUS"
-TITLE="Integrating Bugzilla with Third-Party Tools"
-HREF="integration.html"><LINK
-REL="NEXT"
-TITLE="CVS"
-HREF="cvs.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="integration.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Chapter 5. Integrating Bugzilla with Third-Party Tools</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="cvs.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="bonsai">5.1. Bonsai</H1
-><P
->Bonsai is a web-based tool for managing <A
-HREF="cvs.html"
->CVS, the Concurrent Versioning System</A
->
-      .  Using Bonsai, administrators can control open/closed status
-      of trees, query a fast relational database back-end for change,
-      branch, and comment information, and view changes made since the
-      last time the tree was closed.  These kinds of changes cause the
-      engineer responsible to be <SPAN
-CLASS="QUOTE"
->"on the hook"</SPAN
-> (include
-      cool URL link here for Hook policies at mozilla.org).  Bonsai
-      also includes gateways to <A
-HREF="tinderbox.html"
->Tinderbox, the Mozilla automated build management system</A
-> and Bugzilla </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="integration.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="cvs.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Integrating Bugzilla with Third-Party Tools</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="integration.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->CVS</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/bsdinstall.html

@@ -1,149 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->BSD Installation Notes</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="Installation"
-HREF="installation.html"><LINK
-REL="PREVIOUS"
-TITLE="Mac OS X Installation Notes"
-HREF="osx.html"><LINK
-REL="NEXT"
-TITLE="Installation General Notes"
-HREF="geninstall.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="osx.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Chapter 3. Installation</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="geninstall.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="bsdinstall">3.4. BSD Installation Notes</H1
-><P
->&#13;      For instructions on how to set up Bugzilla on FreeBSD, NetBSD, OpenBSD, BSDi, etc. please
-      consult <A
-HREF="osx.html"
->Section 3.3</A
->.
-    </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="osx.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="geninstall.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Mac OS X Installation Notes</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="installation.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Installation General Notes</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/bzhacking.html

@@ -1,492 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Hacking Bugzilla</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="Useful Patches and Utilities for Bugzilla"
-HREF="patches.html"><LINK
-REL="PREVIOUS"
-TITLE="The Quicksearch Utility"
-HREF="quicksearch.html"><LINK
-REL="NEXT"
-TITLE="GNU Free Documentation License"
-HREF="gfdl.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="quicksearch.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Appendix D. Useful Patches and Utilities for Bugzilla</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="gfdl.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="bzhacking">D.5. Hacking Bugzilla</H1
-><P
->&#13;      The following is a guide for reviewers when checking code into Bugzilla's
-      CVS repostory at mozilla.org.  If you wish to submit patches to Bugzilla,
-      you should follow the rules and style conventions below.  Any code that
-      does not adhere to these basic rules will not be added to Bugzilla's
-      codebase.
-    </P
-><DIV
-CLASS="section"
-><H2
-CLASS="section"
-><A
-NAME="AEN2436">D.5.1. Things that have caused problems and should be avoided</H2
-><P
-></P
-><OL
-TYPE="1"
-><LI
-><P
->&#13;            Usage of variables in Regular Expressions
-          </P
-><P
->&#13;            It is very important that you don't use a variable in a regular
-            expression unless that variable is supposed to contain an expression.
-            This especially applies when using grep.  You should use:
-          </P
-><P
->&#13;            <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><FONT
-COLOR="#000000"
-><PRE
-CLASS="programlisting"
->&#13;grep ($_ eq $value, @array);
-            </PRE
-></FONT
-></TD
-></TR
-></TABLE
->
-          </P
-><P
->&#13;            -- NOT THIS --
-          </P
-><P
->&#13;            <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><FONT
-COLOR="#000000"
-><PRE
-CLASS="programlisting"
->&#13;grep (/$value/, @array);
-            </PRE
-></FONT
-></TD
-></TR
-></TABLE
->
-          </P
-><DIV
-CLASS="note"
-><P
-></P
-><TABLE
-CLASS="note"
-WIDTH="100%"
-BORDER="0"
-><TR
-><TD
-WIDTH="25"
-ALIGN="CENTER"
-VALIGN="TOP"
-><IMG
-SRC="../images/note.gif"
-HSPACE="5"
-ALT="Note"></TD
-><TD
-ALIGN="LEFT"
-VALIGN="TOP"
-><P
->&#13;              If you need to use a non-expression variable inside of an expression, be
-              sure to quote it properly (using <TT
-CLASS="function"
->\Q..\E</TT
->).
-            </P
-></TD
-></TR
-></TABLE
-></DIV
-></LI
-></OL
-></DIV
-><DIV
-CLASS="section"
-><H2
-CLASS="section"
-><A
-NAME="AEN2450">D.5.2. Coding Style for Bugzilla</H2
-><P
->&#13;        While it's true that not all of the code currently in Bugzilla adheres to
-        this (or any) styleguide, it is something that is being worked toward.  Therefore,
-        we ask that all new code (submitted patches and new files) follow this guide
-        as closely as possible (if you're only changing 1 or 2 lines, you don't have
-        to reformat the entire file :).
-      </P
-><P
->&#13;        The Bugzilla development team has decided to adopt the perl style guide as
-        published by Larry Wall.  This giude can be found in <SPAN
-CLASS="QUOTE"
->"Programming
-        Perl"</SPAN
-> (the camel book) or by typing <B
-CLASS="command"
->man perlstyle</B
-> at
-        your favorite shell prompt.
-      </P
-><P
->&#13;        What appears below if a brief summary, please refer to the perl style
-        guide if you don't see your question covered here.  It is much better to submit
-	a patch which fails these criteria than no patch at all, but please try to meet
-	these minimum standards when submitting code to Bugzilla.
-      </P
-><P
-></P
-><UL
-><LI
-><P
->&#13;            Whitespace
-          </P
-><P
->&#13;            Bugzilla's preferred indentation is 4 spaces (no tabs, please).
-          </P
-></LI
-><LI
-><P
->&#13;            Curly braces.
-          </P
-><P
->&#13;            The opening brace of a block should be on the same line as the statement
-            that is causing the block and the closing brace should be at the same
-            indentation level as that statement, for example:
-          </P
-><P
->&#13;            <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><FONT
-COLOR="#000000"
-><PRE
-CLASS="programlisting"
->&#13;if ($var) {
-    print "The variable is true";
-}
-else {
-    print "Try again";
-}
-            </PRE
-></FONT
-></TD
-></TR
-></TABLE
->
-          </P
-><P
->&#13;            -- NOT THIS --
-          </P
-><P
->&#13;            <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><FONT
-COLOR="#000000"
-><PRE
-CLASS="programlisting"
->&#13;if ($var)
-{
-    print "The variable is true";
-}
-else
-{
-    print "Try again";
-}
-            </PRE
-></FONT
-></TD
-></TR
-></TABLE
->
-          </P
-></LI
-><LI
-><P
->&#13;	    Cookies
-	  </P
-><P
->&#13;	    Bugzilla uses cookies to ease the user experience, but no new patches
-	    should <EM
->require</EM
-> user-side cookies.
-	  </P
-></LI
-><LI
-><P
->&#13;            File Names
-          </P
-><P
->&#13;            File names for bugzilla code and support documention should be legal across
-            multiple platforms. <TT
-CLASS="computeroutput"
->\ / : * ? " &#60; &#62;</TT
->
-            and <TT
-CLASS="computeroutput"
->|</TT
-> are all illegal characters for filenames
-            on various platforms.  Also, file names should not have spaces in them as they
-            can cause confusion in CVS and other mozilla.org utilities.
-          </P
-></LI
-><LI
-><P
->&#13;	    Javascript dependencies
-	  </P
-><P
->&#13;	    While Bugzilla uses Javascript to make the user experience easier, no patch
-	    to Bugzilla should <EM
->require</EM
-> Javascript.
-	  </P
-></LI
-><LI
-><P
->&#13;	    Patch Format
-	  </P
-><P
->&#13;	    All patches submitted for inclusion into Bugzilla should be in the form of a
-	    <SPAN
-CLASS="QUOTE"
->"unified diff"</SPAN
->.  This comes from using <SPAN
-CLASS="QUOTE"
->"diff -u"</SPAN
->
-	    instead of simply <SPAN
-CLASS="QUOTE"
->"diff"</SPAN
-> when creating your patch.  This will
-	    result in quicker acceptance of the patch.
-	  </P
-></LI
-><LI
-><P
->&#13;	    Schema Changes
-	  </P
-><P
->&#13;	    If you make schema changes, you should modify <TT
-CLASS="filename"
->sanitycheck.cgi</TT
->
-	    to support the new schema.  All referential columns should be checked.
-	  </P
-></LI
-><LI
-><P
->&#13;	    Taint Mode
-	  </P
-><P
->&#13;	    All new cgis must run in Taint mode (Perl taint and DBI taint), and existing cgi's
-	    which run in taint mode must not have taint mode turned off.
-	  </P
-></LI
-><LI
-><P
->&#13;	    Templatization
-	  </P
-><P
->&#13;	    Patches to Bugzilla need to support templates so they do not force user interface choices
-	    on Bugzilla administrators.
-	  </P
-></LI
-><LI
-><P
->&#13;            Variable Names
-          </P
-><P
->&#13;            If a variable is scoped globally (<TT
-CLASS="computeroutput"
->$::variable</TT
->)
-            its name should be descriptive of what it contains.  Local variables can be named
-            a bit looser, provided the context makes their content obvious.  For example,
-            <TT
-CLASS="computeroutput"
->$ret</TT
-> could be used as a staging variable for a
-             routine's return value as the line <TT
-CLASS="computeroutput"
->return $ret;</TT
->
-             will make it blatantly obvious what the variable holds and most likely be shown
-             on the same screen as <TT
-CLASS="computeroutput"
->my $ret = "";</TT
->.
-          </P
-></LI
-><LI
-><P
->&#13;            Cross Database Compatability
-          </P
-><P
->&#13;            Bugzilla was originally written to work with MySQL and therefore took advantage
-            of some of its features that aren't contained in other RDBMS software.  These
-            should be avoided in all new code.  Examples of these features are enums and
-            <TT
-CLASS="function"
->encrypt()</TT
->.
-          </P
-></LI
-><LI
-><P
->&#13;            Cross Platform Compatability
-          </P
-><P
->&#13;            While Bugzilla was written to be used on Unix based systems (and Unix/Linux is
-            still the only officially supported platform) there are many who desire/need to
-            run Bugzilla on Microsoft Windows boxes.  Whenever possible, we should strive
-            not to make the lives of these people any more complicated and avoid doing things
-            that break Bugzilla's ability to run on multiple operating systems.
-          </P
-></LI
-></UL
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="quicksearch.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="gfdl.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->The Quicksearch Utility</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="patches.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->GNU Free Documentation License</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/cmdline.html

@@ -1,269 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Command-line Bugzilla Queries</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="Useful Patches and Utilities for Bugzilla"
-HREF="patches.html"><LINK
-REL="PREVIOUS"
-TITLE="The setperl.csh Utility"
-HREF="setperl.html"><LINK
-REL="NEXT"
-TITLE="The Quicksearch Utility"
-HREF="quicksearch.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="setperl.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Appendix D. Useful Patches and Utilities for Bugzilla</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="quicksearch.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="cmdline">D.3. Command-line Bugzilla Queries</H1
-><P
->&#13;      Users can query Bugzilla from the command line using this suite
-      of utilities.
-    </P
-><P
->&#13;      The query.conf file contains the mapping from options to field
-      names and comparison types.  Quoted option names are "grepped"
-      for, so it should be easy to edit this file.  Comments (#) have
-      no effect; you must make sure these lines do not contain any
-      quoted "option"
-    </P
-><P
->&#13;      buglist is a shell script which submits a Bugzilla query and
-      writes the resulting HTML page to stdout.  It supports both
-      short options, (such as "-Afoo" or "-Rbar") and long options
-      (such as "--assignedto=foo" or "--reporter=bar").  If the first
-      character of an option is not "-", it is treated as if it were
-      prefixed with "--default=".
-    </P
-><P
->&#13;      The columlist is taken from the COLUMNLIST environment variable.
-      This is equivalent to the "Change Columns" option when you list
-      bugs in buglist.cgi.  If you have already used Bugzilla, use
-      <B
-CLASS="command"
->grep COLUMLIST ~/.netscape/cookies</B
-> to see
-      your current COLUMNLIST setting.
-    </P
-><P
->&#13;      bugs is a simple shell script which calls buglist and extracts
-      the bug numbers from the output.  Adding the prefix
-      "http://bugzilla.mozilla.org/buglist.cgi?bug_id=" turns the bug
-      list into a working link if any bugs are found. Counting bugs is
-      easy.  Pipe the results through <B
-CLASS="command"
->sed -e 's/,/ /g' | wc |
-	awk '{printf $2 "\n"}'</B
->
-    </P
-><P
->&#13;      Akkana says she has good results piping buglist output through
-      <B
-CLASS="command"
->w3m -T text/html -dump</B
->
-    </P
-><DIV
-CLASS="procedure"
-><OL
-TYPE="1"
-><LI
-><P
->&#13;	  Download three files:
-	</P
-><OL
-CLASS="SUBSTEPS"
-TYPE="a"
-><LI
-><P
->&#13;	      <TT
-CLASS="computeroutput"
-> <TT
-CLASS="prompt"
->bash$</TT
-> <B
-CLASS="command"
->wget -O
-		  query.conf
-		  'http://bugzilla.mozilla.org/showattachment.cgi?attach_id=26157'</B
-> </TT
->
-	    </P
-></LI
-><LI
-><P
->&#13;	      <TT
-CLASS="computeroutput"
-> <TT
-CLASS="prompt"
->bash$</TT
-> <B
-CLASS="command"
->wget -O
-		  buglist
-		  'http://bugzilla.mozilla.org/showattachment.cgi?attach_id=26944'</B
-> </TT
->
-	    </P
-></LI
-><LI
-><P
->&#13;	      <TT
-CLASS="computeroutput"
-> <TT
-CLASS="prompt"
->bash#</TT
-> <B
-CLASS="command"
->wget -O
-		  bugs
-		  'http://bugzilla.mozilla.org/showattachment.cgi?attach_id=26215'</B
-> </TT
->
-	    </P
-></LI
-></OL
-></LI
-><LI
-><P
->&#13;	  Make your utilities executable:
-	  <TT
-CLASS="computeroutput"
->&#13;	    <TT
-CLASS="prompt"
->bash$</TT
->
-	    <B
-CLASS="command"
->chmod u+x buglist bugs</B
->
-	  </TT
->
-	</P
-></LI
-></OL
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="setperl.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="quicksearch.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->The setperl.csh Utility</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="patches.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->The Quicksearch Utility</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/contributors.html

@@ -1,150 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Contributors</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="About This Guide"
-HREF="about.html"><LINK
-REL="PREVIOUS"
-TITLE="Credits"
-HREF="credits.html"><LINK
-REL="NEXT"
-TITLE="Feedback"
-HREF="feedback.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="credits.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Chapter 1. About This Guide</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="feedback.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="contributors">1.6. Contributors</H1
-><P
->&#13;      Thanks go to these people for significant contributions to this
-      documentation (in no particular order):
-    </P
-><P
->&#13;      Andrew Pearson, Spencer Smith, Eric Hanson, Kevin Brannen, Ron
-      Teitelbaum, Jacob Steenhagen, Joe Robins
-    </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="credits.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="feedback.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Credits</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="about.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Feedback</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/conventions.html

@@ -1,462 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Document Conventions</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="About This Guide"
-HREF="about.html"><LINK
-REL="PREVIOUS"
-TITLE="Translations"
-HREF="translations.html"><LINK
-REL="NEXT"
-TITLE="Using Bugzilla"
-HREF="using.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="translations.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Chapter 1. About This Guide</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="using.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="conventions">1.7. Document Conventions</H1
-><P
->&#13;    This document uses the following conventions
-  </P
-><DIV
-CLASS="informaltable"
-><A
-NAME="AEN91"><P
-></P
-><TABLE
-BORDER="0"
-CLASS="CALSTABLE"
-><THEAD
-><TR
-><TH
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->Descriptions</TH
-><TH
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->Appearance</TH
-></TR
-></THEAD
-><TBODY
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->Warnings</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><DIV
-CLASS="caution"
-><P
-></P
-><TABLE
-CLASS="caution"
-WIDTH="100%"
-BORDER="0"
-><TR
-><TD
-WIDTH="25"
-ALIGN="CENTER"
-VALIGN="TOP"
-><IMG
-SRC="../images/caution.gif"
-HSPACE="5"
-ALT="Caution"></TD
-><TD
-ALIGN="LEFT"
-VALIGN="TOP"
-><P
->Don't run with scissors!</P
-></TD
-></TR
-></TABLE
-></DIV
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->Hint</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><DIV
-CLASS="tip"
-><P
-></P
-><TABLE
-CLASS="tip"
-WIDTH="100%"
-BORDER="0"
-><TR
-><TD
-WIDTH="25"
-ALIGN="CENTER"
-VALIGN="TOP"
-><IMG
-SRC="../images/tip.gif"
-HSPACE="5"
-ALT="Tip"></TD
-><TD
-ALIGN="LEFT"
-VALIGN="TOP"
-><P
->Warm jar lids under the hot tap to loosen them.</P
-></TD
-></TR
-></TABLE
-></DIV
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->Notes</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><DIV
-CLASS="note"
-><P
-></P
-><TABLE
-CLASS="note"
-WIDTH="100%"
-BORDER="0"
-><TR
-><TD
-WIDTH="25"
-ALIGN="CENTER"
-VALIGN="TOP"
-><IMG
-SRC="../images/note.gif"
-HSPACE="5"
-ALT="Note"></TD
-><TD
-ALIGN="LEFT"
-VALIGN="TOP"
-><P
->Dear John...</P
-></TD
-></TR
-></TABLE
-></DIV
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->Information requiring special attention</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><DIV
-CLASS="warning"
-><P
-></P
-><TABLE
-CLASS="warning"
-WIDTH="100%"
-BORDER="0"
-><TR
-><TD
-WIDTH="25"
-ALIGN="CENTER"
-VALIGN="TOP"
-><IMG
-SRC="../images/warning.gif"
-HSPACE="5"
-ALT="Warning"></TD
-><TD
-ALIGN="LEFT"
-VALIGN="TOP"
-><P
->Read this or the cat gets it.</P
-></TD
-></TR
-></TABLE
-></DIV
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->File Names</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><TT
-CLASS="filename"
->file.extension</TT
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->Directory Names</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><TT
-CLASS="filename"
->directory</TT
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->Commands to be typed</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><B
-CLASS="command"
->command</B
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->Applications Names</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><SPAN
-CLASS="application"
->application</SPAN
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><I
-CLASS="foreignphrase"
->Prompt</I
-> of users command under bash shell</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->bash$</TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><I
-CLASS="foreignphrase"
->Prompt</I
-> of root users command under bash shell</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->bash#</TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><I
-CLASS="foreignphrase"
->Prompt</I
-> of user command under tcsh shell</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->tcsh$</TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->Environment Variables</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><TT
-CLASS="envar"
->VARIABLE</TT
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->Emphasized word</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><EM
->word</EM
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
->Code Example</TD
-><TD
-ALIGN="LEFT"
-VALIGN="MIDDLE"
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><FONT
-COLOR="#000000"
-><PRE
-CLASS="programlisting"
-><TT
-CLASS="sgmltag"
->&#60;para&#62;</TT
->Beginning and end of paragraph<TT
-CLASS="sgmltag"
->&#60;/para&#62;</TT
-></PRE
-></FONT
-></TD
-></TR
-></TABLE
-></TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="translations.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="using.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Translations</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="about.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Using Bugzilla</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/copyright.html

@@ -1,191 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Copyright Information</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="About This Guide"
-HREF="about.html"><LINK
-REL="PREVIOUS"
-TITLE="Purpose and Scope of this Guide"
-HREF="aboutthisguide.html"><LINK
-REL="NEXT"
-TITLE="Disclaimer"
-HREF="disclaimer.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="aboutthisguide.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Chapter 1. About This Guide</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="disclaimer.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="copyright">1.2. Copyright Information</H1
-><A
-NAME="AEN39"><TABLE
-BORDER="0"
-WIDTH="100%"
-CELLSPACING="0"
-CELLPADDING="0"
-CLASS="BLOCKQUOTE"
-><TR
-><TD
-WIDTH="10%"
-VALIGN="TOP"
->&nbsp;</TD
-><TD
-WIDTH="80%"
-VALIGN="TOP"
-><P
->&#13;	Permission is granted to copy, distribute and/or modify this
-	document under the terms of the GNU Free Documentation
-	License, Version 1.1 or any later version published  by the
-	Free Software Foundation; with no Invariant Sections, no
-	Front-Cover Texts, and  with no Back-Cover Texts.  A copy of
-	the license is included in the section entitled  "GNU Free
-	Documentation License".
-      </P
-></TD
-><TD
-WIDTH="10%"
-VALIGN="TOP"
->&nbsp;</TD
-></TR
-><TR
-><TD
-COLSPAN="2"
-ALIGN="RIGHT"
-VALIGN="TOP"
->--<SPAN
-CLASS="attribution"
->Copyright (c) 2000-2002 Matthew P. Barnson and The Bugzilla Team</SPAN
-></TD
-><TD
-WIDTH="10%"
->&nbsp;</TD
-></TR
-></TABLE
-><P
->&#13;      If you have any questions regarding this document, its
-      copyright, or publishing this document in non-electronic form,
-      please contact The Bugzilla Team. 
-    </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="aboutthisguide.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="disclaimer.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Purpose and Scope of this Guide</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="about.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Disclaimer</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/credits.html

@@ -1,208 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Credits</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="About This Guide"
-HREF="about.html"><LINK
-REL="PREVIOUS"
-TITLE="New Versions"
-HREF="newversions.html"><LINK
-REL="NEXT"
-TITLE="Translations"
-HREF="translations.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="newversions.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Chapter 1. About This Guide</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="translations.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="credits">1.5. Credits</H1
-><P
->&#13;      The people listed below have made enormous contributions to the
-      creation of this Guide, through their dedicated hacking efforts,
-      numerous e-mail and IRC support sessions, and overall excellent
-      contribution to the Bugzilla community:
-    </P
-><P
->&#13;      <A
-HREF="mailto://mbarnson@sisna.com"
-TARGET="_top"
->Matthew P. Barnson</A
->
-      for pulling together the Bugzilla Guide and shepherding it to 2.14.
-    </P
-><P
->&#13;      <A
-HREF="mailto://terry@mozilla.org"
-TARGET="_top"
->Terry Weissman</A
->
-      for initially writing Bugzilla and creating the
-      README upon which the UNIX installation documentation is largely based.
-    </P
-><P
->&#13;      <A
-HREF="mailto://tara@tequilarista.org"
-TARGET="_top"
->Tara
-	Hernandez</A
->  for keeping Bugzilla development going
-      strong after Terry left Mozilla.org
-    </P
-><P
->&#13;      <A
-HREF="mailto://dkl@redhat.com"
-TARGET="_top"
->Dave Lawrence</A
-> for
-      providing insight into the key differences between Red Hat's
-      customized Bugzilla, and being largely responsible for the "Red
-      Hat Bugzilla" appendix
-    </P
-><P
->&#13;      <A
-HREF="mailto://endico@mozilla.org"
-TARGET="_top"
->Dawn Endico</A
-> for
-      being a hacker extraordinaire and putting up with my incessant
-      questions and arguments on irc.mozilla.org in #mozwebtools
-    </P
-><P
->&#13;      Last but not least, all the members of the <A
-HREF="news://news.mozilla.org/netscape/public/mozilla/webtools"
-TARGET="_top"
-> netscape.public.mozilla.webtools</A
-> newsgroup.  Without your discussions, insight, suggestions, and patches, this could never have happened.
-    </P
-><P
->&#13;      Thanks also go to the following people for significant contributions 
-      to this documentation (in no particular order):
-    </P
-><P
->&#13;      Zach Liption, Andrew Pearson, Spencer Smith, Eric Hanson, Kevin Brannen,
-      Ron Teitelbaum, Jacob Steenhagen, Joe Robins.
-    </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="newversions.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="translations.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->New Versions</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="about.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Translations</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/cust-templates.html

@@ -1,306 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Template Customisation</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="Administering Bugzilla"
-HREF="administration.html"><LINK
-REL="PREVIOUS"
-TITLE="Bugzilla Security"
-HREF="security.html"><LINK
-REL="NEXT"
-TITLE="Integrating Bugzilla with Third-Party Tools"
-HREF="integration.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="security.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Chapter 5. Administering Bugzilla</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="integration.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="cust-templates">5.7. Template Customisation</H1
-><P
->&#13;      One of the large changes for 2.16 was the templatisation of the
-      entire user-facing UI, using the 
-      <A
-HREF="http://www.template-toolkit.org"
-TARGET="_top"
->Template Toolkit</A
->.
-      Administrators can now configure the look and feel of Bugzilla without
-      having to edit Perl files or face the nightmare of massive merge
-      conflicts when they upgrade to a newer version in the future.
-    </P
-><P
->&#13;      Templatisation also makes localised versions of Bugzilla possible, 
-      for the first time. In the future, a Bugzilla installation may
-      have templates installed for multiple localisations, and select
-      which ones to use based on the user's browser language setting.      
-    </P
-><DIV
-CLASS="section"
-><H2
-CLASS="section"
-><A
-NAME="AEN1611">5.7.1. What to Edit</H2
-><P
->&#13;        There are several ways to take advantage of Bugzilla's templates,
-        and which you use depends on what you want to do. The Bugzilla
-        template directory structure is that there's a top level directory,
-        <TT
-CLASS="filename"
->template</TT
->, which contains a directory for
-        each installed localisation. The default English templates are
-        therefore in <TT
-CLASS="filename"
->en</TT
->. Underneath that, there
-        are two directories - <TT
-CLASS="filename"
->default</TT
-> and 
-        <TT
-CLASS="filename"
->custom</TT
->. The <TT
-CLASS="filename"
->default</TT
->
-        directory contains all the templates shipped with Bugzilla.
-      </P
-><P
->&#13;        One method of making customisations is to directly edit the templates
-        in <TT
-CLASS="filename"
->template/en/default</TT
->. This is probably the
-        best method for small changes, because if you then execute a
-        <B
-CLASS="command"
->cvs update</B
->, any template fixes will get
-        automagically merged into your modified versions.
-      </P
-><P
->&#13;        The other method is to copy the templates into 
-        <TT
-CLASS="filename"
->template/en/custom</TT
->. This method is better if
-        you are going to make major changes, because it is guaranteed that
-        the contents of this directory will not be touched during an upgrade,
-        and you can then decide whether to continue using your own templates,
-        or make the effort to merge your changes into the new versions by
-        hand.
-      </P
-><P
->&#13;        The syntax of the Template Toolkit language is beyond the scope of
-        this guide. It's reasonably easy to pick up by looking at the current 
-        templates; or, you can read the manual, available on the
-        <A
-HREF="http://www.template-toolkit.org"
-TARGET="_top"
->Template Toolkit home
-        page </A
->.
-      </P
-></DIV
-><DIV
-CLASS="section"
-><H2
-CLASS="section"
-><A
-NAME="AEN1626">5.7.2. Particular Templates</H2
-><P
->&#13;        There are a few templates you may be particularly interested in
-        customising for your installation.
-      </P
-><P
->&#13;        <B
-CLASS="command"
->global/header.html.tmpl</B
-> and
-        <B
-CLASS="command"
->global/footer.html.tmpl</B
->:
-        These define the header and footer that go on all Bugzilla pages.
-        Editing these is a way to quickly get a distinctive look and
-        feel for your Bugzilla installation.
-      </P
-></DIV
-><DIV
-CLASS="section"
-><H2
-CLASS="section"
-><A
-NAME="AEN1632">5.7.3. Template Formats</H2
-><P
->&#13;        Some CGIs have the ability to use more than one template. For
-        example, buglist.cgi can output bug lists as RDF or two
-        different forms of HTML (complex and simple). (Try this out
-        by appending <TT
-CLASS="filename"
->&#38;format=simple</TT
-> to a buglist.cgi
-        URL on your Bugzilla installation.) This
-        mechanism, called template 'formats', is extensible.
-      </P
-><P
->&#13;        To see if a CGI supports multiple output formats, grep the
-        CGI for "ValidateOutputFormat". If it's not present, adding
-        multiple format support isn't too hard - see how it's done in
-        other CGIs.
-      </P
-><P
->&#13;        To make a new format template for a CGI which supports this, 
-        open a current template for
-        that CGI and take note of the INTERFACE comment (if present.) This 
-        comment defines what variables are passed into this template. If 
-        there isn't one, I'm afraid you'll have to read the template and
-        the code to find out what information you get. 
-      </P
-><P
->&#13;        Write your template in whatever markup or text style is appropriate.
-      </P
-><P
->&#13;        You now need to decide what content type you want your template
-        served as. Open up the localconfig file and find the $contenttypes
-        variable. If your content type is not there, add it. Remember
-        the three- or four-letter tag assigned to you content type. 
-        This tag will be part of the template filename.
-      </P
-><P
->&#13;        Save the template as <TT
-CLASS="filename"
->&#60;stubname&#62;-&#60;formatname&#62;.&#60;contenttypetag&#62;.tmpl</TT
->. 
-        Try out the template by calling the CGI as 
-        <TT
-CLASS="filename"
->&#60;cginame&#62;.cgi?format=&#60;formatname&#62;</TT
-> .
-      </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="security.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="integration.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Bugzilla Security</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="administration.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Integrating Bugzilla with Third-Party Tools</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/cvs.html

@@ -1,174 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->CVS</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="Integrating Bugzilla with Third-Party Tools"
-HREF="integration.html"><LINK
-REL="PREVIOUS"
-TITLE="Bonsai"
-HREF="bonsai.html"><LINK
-REL="NEXT"
-TITLE="Perforce SCM"
-HREF="scm.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="bonsai.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Chapter 5. Integrating Bugzilla with Third-Party Tools</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="scm.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="cvs">5.2. CVS</H1
-><P
->CVS integration is best accomplished, at this point, using
-      the Bugzilla Email Gateway.  There have been some files
-      submitted to allow greater CVS integration, but we need to make
-      certain that Bugzilla is not tied into one particular software
-      management package.</P
-><P
->&#13;      Follow the instructions in the FAQ for enabling Bugzilla e-mail
-      integration.  Ensure that your check-in script sends an email to
-      your Bugzilla e-mail gateway with the subject of <SPAN
-CLASS="QUOTE"
->"[Bug
-	XXXX]"</SPAN
->, and you can have CVS check-in comments append
-      to your Bugzilla bug.  If you have your check-in script include
-      an @resolution field, you can even change the Bugzilla bug
-      state.
-    </P
-><P
->&#13;      There is also a project, based upon somewhat dated Bugzilla
-      code, to integrate CVS and Bugzilla through CVS' ability to
-      email.  Check it out at:
-      <A
-HREF="http://homepages.kcbbs.gen.nz/~tonyg/"
-TARGET="_top"
->&#13;      http://homepages.kcbbs.gen.nz/~tonyg/</A
->, under the
-      <SPAN
-CLASS="QUOTE"
->"cvszilla"</SPAN
-> link.
-    </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="bonsai.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="scm.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Bonsai</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="integration.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Perforce SCM</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/database.html

@@ -1,185 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->The Bugzilla Database</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Software Download Links"
-HREF="downloadlinks.html"><LINK
-REL="NEXT"
-TITLE="Database Schema Chart"
-HREF="dbschema.html"></HEAD
-><BODY
-CLASS="appendix"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="downloadlinks.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="dbschema.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="appendix"
-><H1
-><A
-NAME="database">Appendix C. The Bugzilla Database</H1
-><DIV
-CLASS="TOC"
-><DL
-><DT
-><B
->Table of Contents</B
-></DT
-><DT
->C.1. <A
-HREF="dbschema.html"
->Database Schema Chart</A
-></DT
-><DT
->C.2. <A
-HREF="dbdoc.html"
->MySQL Bugzilla Database Introduction</A
-></DT
-><DT
->C.3. <A
-HREF="granttables.html"
->MySQL Permissions &#38; Grant Tables</A
-></DT
-></DL
-></DIV
-><DIV
-CLASS="note"
-><P
-></P
-><TABLE
-CLASS="note"
-WIDTH="100%"
-BORDER="0"
-><TR
-><TD
-WIDTH="25"
-ALIGN="CENTER"
-VALIGN="TOP"
-><IMG
-SRC="../images/note.gif"
-HSPACE="5"
-ALT="Note"></TD
-><TD
-ALIGN="LEFT"
-VALIGN="TOP"
-><P
->&#13;      This document really needs to be updated with more fleshed out information about primary keys, interrelationships, and maybe some nifty tables to document dependencies.  Any takers?
-    </P
-></TD
-></TR
-></TABLE
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="downloadlinks.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="dbschema.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Software Download Links</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Database Schema Chart</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/dbdoc.html

@@ -1,576 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->MySQL Bugzilla Database Introduction</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="The Bugzilla Database"
-HREF="database.html"><LINK
-REL="PREVIOUS"
-TITLE="Database Schema Chart"
-HREF="dbschema.html"><LINK
-REL="NEXT"
-TITLE="MySQL Permissions & Grant Tables"
-HREF="granttables.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="dbschema.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Appendix C. The Bugzilla Database</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="granttables.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="dbdoc">C.2. MySQL Bugzilla Database Introduction</H1
-><P
->&#13;      This information comes straight from my life.  I was forced to learn how
-      Bugzilla organizes database because of nitpicky requests from users for tiny
-      changes in wording, rather than having people re-educate themselves or
-      figure out how to work our procedures around the tool.  It sucks, but it can
-      and will happen to you, so learn how the schema works and deal with it when it
-      comes.
-    </P
-><P
->&#13;      So, here you are with your brand-new installation of Bugzilla.  You've got
-      MySQL set up, Apache working right, Perl DBI and DBD talking to the database
-      flawlessly.  Maybe you've even entered a few test bugs to make sure email's
-      working; people seem to be notified of new bugs and changes, and you can
-      enter and edit bugs to your heart's content.  Perhaps you've gone through the
-      trouble of setting up a gateway for people to submit bugs to your database via
-      email, have had a few people test it, and received rave reviews from your beta
-      testers.
-    </P
-><P
->&#13;      What's the next thing you do?  Outline a training strategy for your
-      development team, of course, and bring them up to speed on the new tool you've
-      labored over for hours.
-    </P
-><P
->&#13;      Your first training session starts off very well!  You have a captive
-      audience which seems enraptured by the efficiency embodied in this thing called
-      "Bugzilla".  You are caught up describing the nifty features, how people can
-      save favorite queries in the database, set them up as headers and footers on
-      their pages, customize their layouts, generate reports, track status with
-      greater efficiency than ever before, leap tall buildings with a single bound
-      and rescue Jane from the clutches of Certain Death!
-    </P
-><P
->&#13;      But Certain Death speaks up -- a tiny voice, from the dark corners of the
-      conference room.  "I have a concern," the voice hisses from the darkness,
-      "about the use of the word 'verified'.
-    </P
-><P
->&#13;      The room, previously filled with happy chatter, lapses into reverential
-      silence as Certain Death (better known as the Vice President of Software
-      Engineering) continues.  "You see, for two years we've used the word 'verified'
-      to indicate that a developer or quality assurance engineer has confirmed that,
-      in fact, a bug is valid. I don't want to lose two years of training to a
-      new software product.  You need to change the bug status of 'verified' to
-      'approved' as soon as possible. To avoid confusion, of course."
-    </P
-><P
->&#13;      Oh no!  Terror strikes your heart, as you find yourself mumbling "yes, yes, I
-      don't think that would be a problem," You review the changes with Certain
-      Death, and continue to jabber on, "no, it's not too big a change. I mean, we
-      have the source code, right? You know, 'Use the Source, Luke' and all that...
-      no problem," All the while you quiver inside like a beached jellyfish bubbling,
-      burbling, and boiling on a hot Jamaican sand dune...
-    </P
-><P
->&#13;      Thus begins your adventure into the heart of Bugzilla.  You've been forced
-      to learn about non-portable enum() fields, varchar columns, and tinyint
-      definitions. The Adventure Awaits You!
-    </P
-><DIV
-CLASS="section"
-><H2
-CLASS="section"
-><A
-NAME="AEN2272">C.2.1. Bugzilla Database Basics</H2
-><P
->&#13;	If you were like me, at this point you're totally clueless
-	about the internals of MySQL, and if it weren't for this
-	executive order from the Vice President you couldn't care less
-	about the difference between a <SPAN
-CLASS="QUOTE"
->"bigint"</SPAN
-> and a
-	<SPAN
-CLASS="QUOTE"
->"tinyint"</SPAN
-> entry in MySQL.   I recommend you refer
-	to the MySQL documentation, available at <A
-HREF="http://www.mysql.com/doc.html"
-TARGET="_top"
->MySQL.com</A
->.  Below are the basics you need to know about the Bugzilla database.  Check the chart above for more details.
-      </P
-><P
-><P
-></P
-><OL
-TYPE="1"
-><LI
-><P
->&#13;	      To connect to your database:
-	    </P
-><P
->&#13;	      <TT
-CLASS="prompt"
->bash#</TT
-><B
-CLASS="command"
->mysql</B
-><TT
-CLASS="parameter"
-><I
->-u root</I
-></TT
->
-	    </P
-><P
->&#13;	      If this works without asking you for a password,
-	      <EM
->shame on you</EM
->!  You should have
-	      locked your security down like the installation
-	      instructions told you to.  You can find details on
-	      locking down your database in the Bugzilla FAQ in this
-	      directory (under "Security"), or more robust security
-	      generalities in the MySQL searchable documentation at
-	      http://www.mysql.com/php/manual.php3?section=Privilege_system .
-	    </P
-></LI
-><LI
-><P
->You should now be at a prompt that looks like
-	      this:</P
-><P
-><TT
-CLASS="prompt"
->mysql&#62;</TT
-></P
-><P
->At the prompt, if <SPAN
-CLASS="QUOTE"
->"bugs"</SPAN
-> is the name
-	      you chose in the<TT
-CLASS="filename"
->localconfig</TT
-> file
-	      for your Bugzilla database, type:</P
-><P
-><TT
-CLASS="prompt"
->mysql</TT
-><B
-CLASS="command"
->use bugs;</B
-></P
-><DIV
-CLASS="note"
-><P
-></P
-><TABLE
-CLASS="note"
-WIDTH="100%"
-BORDER="0"
-><TR
-><TD
-WIDTH="25"
-ALIGN="CENTER"
-VALIGN="TOP"
-><IMG
-SRC="../images/note.gif"
-HSPACE="5"
-ALT="Note"></TD
-><TD
-ALIGN="LEFT"
-VALIGN="TOP"
-><P
->Don't forget the <SPAN
-CLASS="QUOTE"
->";"</SPAN
-> at the end of
-		each line, or you'll be kicking yourself later.</P
-></TD
-></TR
-></TABLE
-></DIV
-></LI
-></OL
->
-      </P
-><DIV
-CLASS="section"
-><H3
-CLASS="section"
-><A
-NAME="AEN2301">C.2.1.1. Bugzilla Database Tables</H3
-><P
->  Imagine your MySQL database as a series of
-	  spreadsheets, and you won't be too far off.  If you use this
-	  command:</P
-><P
-><TT
-CLASS="prompt"
->mysql&#62;</TT
-><B
-CLASS="command"
->show tables from bugs;</B
-></P
-><P
->you'll be able to see all the
-	  <SPAN
-CLASS="QUOTE"
->"spreadsheets"</SPAN
-> (tables) in your database.  It
-	  is similar to a file system, only faster and more robust for
-	  certain types of operations.</P
-><P
->From the command issued above, ou should have some
-	  output that looks like this:
-	  <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><FONT
-COLOR="#000000"
-><PRE
-CLASS="programlisting"
->&#13;+-------------------+
-| Tables in bugs    |
-+-------------------+
-| attachments       |
-| bugs              |
-| bugs_activity     |
-| cc                |
-| components        |
-| dependencies      |
-| fielddefs         |
-| groups            |
-| keyworddefs       |
-| keywords          |
-| logincookies      |
-| longdescs         |
-| milestones        |
-| namedqueries      |
-| products          |
-| profiles          |
-| profiles_activity |
-| shadowlog         |
-| tokens            |
-| versions          |
-| votes             |
-| watch             |
-+-------------------+
-	  </PRE
-></FONT
-></TD
-></TR
-></TABLE
-></P
-><P
-CLASS="literallayout"
-><br>
-<br>
-&nbsp;&nbsp;Here's&nbsp;an&nbsp;overview&nbsp;of&nbsp;what&nbsp;each&nbsp;table&nbsp;does.&nbsp;&nbsp;Most&nbsp;columns&nbsp;in&nbsp;each&nbsp;table&nbsp;have<br>
-descriptive&nbsp;names&nbsp;that&nbsp;make&nbsp;it&nbsp;fairly&nbsp;trivial&nbsp;to&nbsp;figure&nbsp;out&nbsp;their&nbsp;jobs.<br>
-<br>
-attachments:&nbsp;This&nbsp;table&nbsp;stores&nbsp;all&nbsp;attachments&nbsp;to&nbsp;bugs.&nbsp;&nbsp;It&nbsp;tends&nbsp;to&nbsp;be&nbsp;your<br>
-largest&nbsp;table,&nbsp;yet&nbsp;also&nbsp;generally&nbsp;has&nbsp;the&nbsp;fewest&nbsp;entries&nbsp;because&nbsp;file<br>
-attachments&nbsp;are&nbsp;so&nbsp;(relatively)&nbsp;large.<br>
-<br>
-bugs:&nbsp;&nbsp;This&nbsp;is&nbsp;the&nbsp;core&nbsp;of&nbsp;your&nbsp;system.&nbsp;&nbsp;The&nbsp;bugs&nbsp;table&nbsp;stores&nbsp;most&nbsp;of&nbsp;the<br>
-current&nbsp;information&nbsp;about&nbsp;a&nbsp;bug,&nbsp;with&nbsp;the&nbsp;exception&nbsp;of&nbsp;the&nbsp;info&nbsp;stored&nbsp;in&nbsp;the<br>
-other&nbsp;tables.<br>
-<br>
-bugs_activity:&nbsp;&nbsp;This&nbsp;stores&nbsp;information&nbsp;regarding&nbsp;what&nbsp;changes&nbsp;are&nbsp;made&nbsp;to&nbsp;bugs<br>
-when&nbsp;--&nbsp;a&nbsp;history&nbsp;file.<br>
-<br>
-cc:&nbsp;&nbsp;This&nbsp;tiny&nbsp;table&nbsp;simply&nbsp;stores&nbsp;all&nbsp;the&nbsp;CC&nbsp;information&nbsp;for&nbsp;any&nbsp;bug&nbsp;which&nbsp;has<br>
-any&nbsp;entries&nbsp;in&nbsp;the&nbsp;CC&nbsp;field&nbsp;of&nbsp;the&nbsp;bug.&nbsp;&nbsp;Note&nbsp;that,&nbsp;like&nbsp;most&nbsp;other&nbsp;tables&nbsp;in<br>
-Bugzilla,&nbsp;it&nbsp;does&nbsp;not&nbsp;refer&nbsp;to&nbsp;users&nbsp;by&nbsp;their&nbsp;user&nbsp;names,&nbsp;but&nbsp;by&nbsp;their&nbsp;unique<br>
-userid,&nbsp;stored&nbsp;as&nbsp;a&nbsp;primary&nbsp;key&nbsp;in&nbsp;the&nbsp;profiles&nbsp;table.<br>
-<br>
-components:&nbsp;This&nbsp;stores&nbsp;the&nbsp;programs&nbsp;and&nbsp;components&nbsp;(or&nbsp;products&nbsp;and<br>
-components,&nbsp;in&nbsp;newer&nbsp;Bugzilla&nbsp;parlance)&nbsp;for&nbsp;Bugzilla.&nbsp;&nbsp;Curiously,&nbsp;the&nbsp;"program"<br>
-(product)&nbsp;field&nbsp;is&nbsp;the&nbsp;full&nbsp;name&nbsp;of&nbsp;the&nbsp;product,&nbsp;rather&nbsp;than&nbsp;some&nbsp;other&nbsp;unique<br>
-identifier,&nbsp;like&nbsp;bug_id&nbsp;and&nbsp;user_id&nbsp;are&nbsp;elsewhere&nbsp;in&nbsp;the&nbsp;database.<br>
-<br>
-dependencies:&nbsp;Stores&nbsp;data&nbsp;about&nbsp;those&nbsp;cool&nbsp;dependency&nbsp;trees.<br>
-<br>
-fielddefs:&nbsp;&nbsp;A&nbsp;nifty&nbsp;table&nbsp;that&nbsp;defines&nbsp;other&nbsp;tables.&nbsp;&nbsp;For&nbsp;instance,&nbsp;when&nbsp;you<br>
-submit&nbsp;a&nbsp;form&nbsp;that&nbsp;changes&nbsp;the&nbsp;value&nbsp;of&nbsp;"AssignedTo"&nbsp;this&nbsp;table&nbsp;allows<br>
-translation&nbsp;to&nbsp;the&nbsp;actual&nbsp;field&nbsp;name&nbsp;"assigned_to"&nbsp;for&nbsp;entry&nbsp;into&nbsp;MySQL.<br>
-<br>
-groups:&nbsp;&nbsp;defines&nbsp;bitmasks&nbsp;for&nbsp;groups.&nbsp;&nbsp;A&nbsp;bitmask&nbsp;is&nbsp;a&nbsp;number&nbsp;that&nbsp;can&nbsp;uniquely<br>
-identify&nbsp;group&nbsp;memberships.&nbsp;&nbsp;For&nbsp;instance,&nbsp;say&nbsp;the&nbsp;group&nbsp;that&nbsp;is&nbsp;allowed&nbsp;to<br>
-tweak&nbsp;parameters&nbsp;is&nbsp;assigned&nbsp;a&nbsp;value&nbsp;of&nbsp;"1",&nbsp;the&nbsp;group&nbsp;that&nbsp;is&nbsp;allowed&nbsp;to&nbsp;edit<br>
-users&nbsp;is&nbsp;assigned&nbsp;a&nbsp;"2",&nbsp;and&nbsp;the&nbsp;group&nbsp;that&nbsp;is&nbsp;allowed&nbsp;to&nbsp;create&nbsp;new&nbsp;groups&nbsp;is<br>
-assigned&nbsp;the&nbsp;bitmask&nbsp;of&nbsp;"4".&nbsp;&nbsp;By&nbsp;uniquely&nbsp;combining&nbsp;the&nbsp;group&nbsp;bitmasks&nbsp;(much<br>
-like&nbsp;the&nbsp;chmod&nbsp;command&nbsp;in&nbsp;UNIX,)&nbsp;you&nbsp;can&nbsp;identify&nbsp;a&nbsp;user&nbsp;is&nbsp;allowed&nbsp;to&nbsp;tweak<br>
-parameters&nbsp;and&nbsp;create&nbsp;groups,&nbsp;but&nbsp;not&nbsp;edit&nbsp;users,&nbsp;by&nbsp;giving&nbsp;him&nbsp;a&nbsp;bitmask&nbsp;of<br>
-"5",&nbsp;or&nbsp;a&nbsp;user&nbsp;allowed&nbsp;to&nbsp;edit&nbsp;users&nbsp;and&nbsp;create&nbsp;groups,&nbsp;but&nbsp;not&nbsp;tweak<br>
-parameters,&nbsp;by&nbsp;giving&nbsp;him&nbsp;a&nbsp;bitmask&nbsp;of&nbsp;"6"&nbsp;Simple,&nbsp;huh?<br>
-&nbsp;&nbsp;If&nbsp;this&nbsp;makes&nbsp;no&nbsp;sense&nbsp;to&nbsp;you,&nbsp;try&nbsp;this&nbsp;at&nbsp;the&nbsp;mysql&nbsp;prompt:<br>
-mysql&#62;&nbsp;select&nbsp;*&nbsp;from&nbsp;groups;<br>
-&nbsp;&nbsp;You'll&nbsp;see&nbsp;the&nbsp;list,&nbsp;it&nbsp;makes&nbsp;much&nbsp;more&nbsp;sense&nbsp;that&nbsp;way.<br>
-<br>
-keyworddefs:&nbsp;&nbsp;Definitions&nbsp;of&nbsp;keywords&nbsp;to&nbsp;be&nbsp;used<br>
-<br>
-keywords:&nbsp;Unlike&nbsp;what&nbsp;you'd&nbsp;think,&nbsp;this&nbsp;table&nbsp;holds&nbsp;which&nbsp;keywords&nbsp;are<br>
-associated&nbsp;with&nbsp;which&nbsp;bug&nbsp;id's.<br>
-<br>
-logincookies:&nbsp;This&nbsp;stores&nbsp;every&nbsp;login&nbsp;cookie&nbsp;ever&nbsp;assigned&nbsp;to&nbsp;you&nbsp;for&nbsp;every<br>
-machine&nbsp;you've&nbsp;ever&nbsp;logged&nbsp;into&nbsp;Bugzilla&nbsp;from.&nbsp;&nbsp;Curiously,&nbsp;it&nbsp;never&nbsp;does&nbsp;any<br>
-housecleaning&nbsp;--&nbsp;I&nbsp;see&nbsp;cookies&nbsp;in&nbsp;this&nbsp;file&nbsp;I've&nbsp;not&nbsp;used&nbsp;for&nbsp;months.&nbsp;&nbsp;However,<br>
-since&nbsp;Bugzilla&nbsp;never&nbsp;expires&nbsp;your&nbsp;cookie&nbsp;(for&nbsp;convenience'&nbsp;sake),&nbsp;it&nbsp;makes<br>
-sense.<br>
-<br>
-longdescs:&nbsp;&nbsp;The&nbsp;meat&nbsp;of&nbsp;bugzilla&nbsp;--&nbsp;here&nbsp;is&nbsp;where&nbsp;all&nbsp;user&nbsp;comments&nbsp;are&nbsp;stored!<br>
-You've&nbsp;only&nbsp;got&nbsp;2^24&nbsp;bytes&nbsp;per&nbsp;comment&nbsp;(it's&nbsp;a&nbsp;mediumtext&nbsp;field),&nbsp;so&nbsp;speak<br>
-sparingly&nbsp;--&nbsp;that's&nbsp;only&nbsp;the&nbsp;amount&nbsp;of&nbsp;space&nbsp;the&nbsp;Old&nbsp;Testament&nbsp;from&nbsp;the&nbsp;Bible<br>
-would&nbsp;take&nbsp;(uncompressed,&nbsp;16&nbsp;megabytes).&nbsp;&nbsp;Each&nbsp;comment&nbsp;is&nbsp;keyed&nbsp;to&nbsp;the<br>
-bug_id&nbsp;to&nbsp;which&nbsp;it's&nbsp;attached,&nbsp;so&nbsp;the&nbsp;order&nbsp;is&nbsp;necessarily&nbsp;chronological,&nbsp;for<br>
-comments&nbsp;are&nbsp;played&nbsp;back&nbsp;in&nbsp;the&nbsp;order&nbsp;in&nbsp;which&nbsp;they&nbsp;are&nbsp;received.<br>
-<br>
-milestones:&nbsp;&nbsp;Interesting&nbsp;that&nbsp;milestones&nbsp;are&nbsp;associated&nbsp;with&nbsp;a&nbsp;specific&nbsp;product<br>
-in&nbsp;this&nbsp;table,&nbsp;but&nbsp;Bugzilla&nbsp;does&nbsp;not&nbsp;yet&nbsp;support&nbsp;differing&nbsp;milestones&nbsp;by<br>
-product&nbsp;through&nbsp;the&nbsp;standard&nbsp;configuration&nbsp;interfaces.<br>
-<br>
-namedqueries:&nbsp;&nbsp;This&nbsp;is&nbsp;where&nbsp;everybody&nbsp;stores&nbsp;their&nbsp;"custom&nbsp;queries".&nbsp;&nbsp;Very<br>
-cool&nbsp;feature;&nbsp;it&nbsp;beats&nbsp;the&nbsp;tar&nbsp;out&nbsp;of&nbsp;having&nbsp;to&nbsp;bookmark&nbsp;each&nbsp;cool&nbsp;query&nbsp;you<br>
-construct.<br>
-<br>
-products:&nbsp;&nbsp;What&nbsp;products&nbsp;you&nbsp;have,&nbsp;whether&nbsp;new&nbsp;bug&nbsp;entries&nbsp;are&nbsp;allowed&nbsp;for&nbsp;the<br>
-product,&nbsp;what&nbsp;milestone&nbsp;you're&nbsp;working&nbsp;toward&nbsp;on&nbsp;that&nbsp;product,&nbsp;votes,&nbsp;etc.&nbsp;&nbsp;It<br>
-will&nbsp;be&nbsp;nice&nbsp;when&nbsp;the&nbsp;components&nbsp;table&nbsp;supports&nbsp;these&nbsp;same&nbsp;features,&nbsp;so&nbsp;you<br>
-could&nbsp;close&nbsp;a&nbsp;particular&nbsp;component&nbsp;for&nbsp;bug&nbsp;entry&nbsp;without&nbsp;having&nbsp;to&nbsp;close&nbsp;an<br>
-entire&nbsp;product...<br>
-<br>
-profiles:&nbsp;&nbsp;Ahh,&nbsp;so&nbsp;you&nbsp;were&nbsp;wondering&nbsp;where&nbsp;your&nbsp;precious&nbsp;user&nbsp;information&nbsp;was<br>
-stored?&nbsp;&nbsp;Here&nbsp;it&nbsp;is!&nbsp;&nbsp;With&nbsp;the&nbsp;passwords&nbsp;in&nbsp;plain&nbsp;text&nbsp;for&nbsp;all&nbsp;to&nbsp;see!&nbsp;(but<br>
-sshh...&nbsp;don't&nbsp;tell&nbsp;your&nbsp;users!)<br>
-<br>
-profiles_activity:&nbsp;&nbsp;Need&nbsp;to&nbsp;know&nbsp;who&nbsp;did&nbsp;what&nbsp;when&nbsp;to&nbsp;who's&nbsp;profile?&nbsp;&nbsp;This'll<br>
-tell&nbsp;you,&nbsp;it's&nbsp;a&nbsp;pretty&nbsp;complete&nbsp;history.<br>
-<br>
-shadowlog:&nbsp;&nbsp;I&nbsp;could&nbsp;be&nbsp;mistaken&nbsp;here,&nbsp;but&nbsp;I&nbsp;believe&nbsp;this&nbsp;table&nbsp;tells&nbsp;you&nbsp;when<br>
-your&nbsp;shadow&nbsp;database&nbsp;is&nbsp;updated&nbsp;and&nbsp;what&nbsp;commands&nbsp;were&nbsp;used&nbsp;to&nbsp;update&nbsp;it.&nbsp;&nbsp;We<br>
-don't&nbsp;use&nbsp;a&nbsp;shadow&nbsp;database&nbsp;at&nbsp;our&nbsp;site&nbsp;yet,&nbsp;so&nbsp;it's&nbsp;pretty&nbsp;empty&nbsp;for&nbsp;us.<br>
-<br>
-versions:&nbsp;&nbsp;Version&nbsp;information&nbsp;for&nbsp;every&nbsp;product<br>
-<br>
-votes:&nbsp;&nbsp;Who&nbsp;voted&nbsp;for&nbsp;what&nbsp;when<br>
-<br>
-watch:&nbsp;&nbsp;Who&nbsp;(according&nbsp;to&nbsp;userid)&nbsp;is&nbsp;watching&nbsp;who's&nbsp;bugs&nbsp;(according&nbsp;to&nbsp;their<br>
-userid).<br>
-<br>
-<br>
-===<br>
-THE&nbsp;DETAILS<br>
-===<br>
-<br>
-&nbsp;&nbsp;Ahh,&nbsp;so&nbsp;you're&nbsp;wondering&nbsp;just&nbsp;what&nbsp;to&nbsp;do&nbsp;with&nbsp;the&nbsp;information&nbsp;above?&nbsp;&nbsp;At&nbsp;the<br>
-mysql&nbsp;prompt,&nbsp;you&nbsp;can&nbsp;view&nbsp;any&nbsp;information&nbsp;about&nbsp;the&nbsp;columns&nbsp;in&nbsp;a&nbsp;table&nbsp;with<br>
-this&nbsp;command&nbsp;(where&nbsp;"table"&nbsp;is&nbsp;the&nbsp;name&nbsp;of&nbsp;the&nbsp;table&nbsp;you&nbsp;wish&nbsp;to&nbsp;view):<br>
-<br>
-mysql&#62;&nbsp;show&nbsp;columns&nbsp;from&nbsp;table;<br>
-<br>
-&nbsp;&nbsp;You&nbsp;can&nbsp;also&nbsp;view&nbsp;all&nbsp;the&nbsp;data&nbsp;in&nbsp;a&nbsp;table&nbsp;with&nbsp;this&nbsp;command:<br>
-<br>
-mysql&#62;&nbsp;select&nbsp;*&nbsp;from&nbsp;table;<br>
-<br>
-&nbsp;&nbsp;--&nbsp;note:&nbsp;this&nbsp;is&nbsp;a&nbsp;very&nbsp;bad&nbsp;idea&nbsp;to&nbsp;do&nbsp;on,&nbsp;for&nbsp;instance,&nbsp;the&nbsp;"bugs"&nbsp;table&nbsp;if<br>
-you&nbsp;have&nbsp;50,000&nbsp;bugs.&nbsp;&nbsp;You'll&nbsp;be&nbsp;sitting&nbsp;there&nbsp;a&nbsp;while&nbsp;until&nbsp;you&nbsp;ctrl-c&nbsp;or<br>
-50,000&nbsp;bugs&nbsp;play&nbsp;across&nbsp;your&nbsp;screen.<br>
-<br>
-&nbsp;&nbsp;You&nbsp;can&nbsp;limit&nbsp;the&nbsp;display&nbsp;from&nbsp;above&nbsp;a&nbsp;little&nbsp;with&nbsp;the&nbsp;command,&nbsp;where<br>
-"column"&nbsp;is&nbsp;the&nbsp;name&nbsp;of&nbsp;the&nbsp;column&nbsp;for&nbsp;which&nbsp;you&nbsp;wish&nbsp;to&nbsp;restrict&nbsp;information:<br>
-<br>
-mysql&#62;&nbsp;select&nbsp;*&nbsp;from&nbsp;table&nbsp;where&nbsp;(column&nbsp;=&nbsp;"some&nbsp;info");<br>
-<br>
-&nbsp;&nbsp;--&nbsp;or&nbsp;the&nbsp;reverse&nbsp;of&nbsp;this<br>
-<br>
-mysql&#62;&nbsp;select&nbsp;*&nbsp;from&nbsp;table&nbsp;where&nbsp;(column&nbsp;!=&nbsp;"some&nbsp;info");<br>
-<br>
-&nbsp;&nbsp;Let's&nbsp;take&nbsp;our&nbsp;example&nbsp;from&nbsp;the&nbsp;introduction,&nbsp;and&nbsp;assume&nbsp;you&nbsp;need&nbsp;to&nbsp;change<br>
-the&nbsp;word&nbsp;"verified"&nbsp;to&nbsp;"approved"&nbsp;in&nbsp;the&nbsp;resolution&nbsp;field.&nbsp;&nbsp;We&nbsp;know&nbsp;from&nbsp;the<br>
-above&nbsp;information&nbsp;that&nbsp;the&nbsp;resolution&nbsp;is&nbsp;likely&nbsp;to&nbsp;be&nbsp;stored&nbsp;in&nbsp;the&nbsp;"bugs"<br>
-table.&nbsp;Note&nbsp;we'll&nbsp;need&nbsp;to&nbsp;change&nbsp;a&nbsp;little&nbsp;perl&nbsp;code&nbsp;as&nbsp;well&nbsp;as&nbsp;this&nbsp;database<br>
-change,&nbsp;but&nbsp;I&nbsp;won't&nbsp;plunge&nbsp;into&nbsp;that&nbsp;in&nbsp;this&nbsp;document.&nbsp;Let's&nbsp;verify&nbsp;the<br>
-information&nbsp;is&nbsp;stored&nbsp;in&nbsp;the&nbsp;"bugs"&nbsp;table:<br>
-<br>
-mysql&#62;&nbsp;show&nbsp;columns&nbsp;from&nbsp;bugs<br>
-<br>
-&nbsp;&nbsp;(exceedingly&nbsp;long&nbsp;output&nbsp;truncated&nbsp;here)<br>
-|&nbsp;bug_status|&nbsp;enum('UNCONFIRMED','NEW','ASSIGNED','REOPENED','RESOLVED','VERIFIED','CLOSED')||MUL&nbsp;|&nbsp;UNCONFIRMED||<br>
-<br>
-&nbsp;&nbsp;Sorry&nbsp;about&nbsp;that&nbsp;long&nbsp;line.&nbsp;&nbsp;We&nbsp;see&nbsp;from&nbsp;this&nbsp;that&nbsp;the&nbsp;"bug&nbsp;status"&nbsp;column&nbsp;is<br>
-an&nbsp;"enum&nbsp;field",&nbsp;which&nbsp;is&nbsp;a&nbsp;MySQL&nbsp;peculiarity&nbsp;where&nbsp;a&nbsp;string&nbsp;type&nbsp;field&nbsp;can<br>
-only&nbsp;have&nbsp;certain&nbsp;types&nbsp;of&nbsp;entries.&nbsp;&nbsp;While&nbsp;I&nbsp;think&nbsp;this&nbsp;is&nbsp;very&nbsp;cool,&nbsp;it's&nbsp;not<br>
-standard&nbsp;SQL.&nbsp;&nbsp;Anyway,&nbsp;we&nbsp;need&nbsp;to&nbsp;add&nbsp;the&nbsp;possible&nbsp;enum&nbsp;field&nbsp;entry<br>
-'APPROVED'&nbsp;by&nbsp;altering&nbsp;the&nbsp;"bugs"&nbsp;table.<br>
-<br>
-mysql&#62;&nbsp;ALTER&nbsp;table&nbsp;bugs&nbsp;CHANGE&nbsp;bug_status&nbsp;bug_status<br>
-&nbsp;&nbsp;&nbsp;&nbsp;-&#62;&nbsp;enum("UNCONFIRMED",&nbsp;"NEW",&nbsp;"ASSIGNED",&nbsp;"REOPENED",&nbsp;"RESOLVED",<br>
-&nbsp;&nbsp;&nbsp;&nbsp;-&#62;&nbsp;"VERIFIED",&nbsp;"APPROVED",&nbsp;"CLOSED")&nbsp;not&nbsp;null;<br>
-<br>
-&nbsp;&nbsp;&nbsp;&nbsp;(note&nbsp;we&nbsp;can&nbsp;take&nbsp;three&nbsp;lines&nbsp;or&nbsp;more&nbsp;--&nbsp;whatever&nbsp;you&nbsp;put&nbsp;in&nbsp;before&nbsp;the<br>
-semicolon&nbsp;is&nbsp;evaluated&nbsp;as&nbsp;a&nbsp;single&nbsp;expression)<br>
-<br>
-Now&nbsp;if&nbsp;you&nbsp;do&nbsp;this:<br>
-<br>
-mysql&#62;&nbsp;show&nbsp;columns&nbsp;from&nbsp;bugs;<br>
-<br>
-&nbsp;&nbsp;you'll&nbsp;see&nbsp;that&nbsp;the&nbsp;bug_status&nbsp;field&nbsp;has&nbsp;an&nbsp;extra&nbsp;"APPROVED"&nbsp;enum&nbsp;that's<br>
-available!&nbsp;&nbsp;Cool&nbsp;thing,&nbsp;too,&nbsp;is&nbsp;that&nbsp;this&nbsp;is&nbsp;reflected&nbsp;on&nbsp;your&nbsp;query&nbsp;page&nbsp;as<br>
-well&nbsp;--&nbsp;you&nbsp;can&nbsp;query&nbsp;by&nbsp;the&nbsp;new&nbsp;status.&nbsp;&nbsp;But&nbsp;how's&nbsp;it&nbsp;fit&nbsp;into&nbsp;the&nbsp;existing<br>
-scheme&nbsp;of&nbsp;things?<br>
-&nbsp;&nbsp;Looks&nbsp;like&nbsp;you&nbsp;need&nbsp;to&nbsp;go&nbsp;back&nbsp;and&nbsp;look&nbsp;for&nbsp;instances&nbsp;of&nbsp;the&nbsp;word&nbsp;"verified"<br>
-in&nbsp;the&nbsp;perl&nbsp;code&nbsp;for&nbsp;Bugzilla&nbsp;--&nbsp;wherever&nbsp;you&nbsp;find&nbsp;"verified",&nbsp;change&nbsp;it&nbsp;to<br>
-"approved"&nbsp;and&nbsp;you're&nbsp;in&nbsp;business&nbsp;(make&nbsp;sure&nbsp;that's&nbsp;a&nbsp;case-insensitive&nbsp;search).<br>
-Although&nbsp;you&nbsp;can&nbsp;query&nbsp;by&nbsp;the&nbsp;enum&nbsp;field,&nbsp;you&nbsp;can't&nbsp;give&nbsp;something&nbsp;a&nbsp;status<br>
-of&nbsp;"APPROVED"&nbsp;until&nbsp;you&nbsp;make&nbsp;the&nbsp;perl&nbsp;changes.&nbsp;&nbsp;&nbsp;Note&nbsp;that&nbsp;this&nbsp;change&nbsp;I<br>
-mentioned&nbsp;can&nbsp;also&nbsp;be&nbsp;done&nbsp;by&nbsp;editing&nbsp;checksetup.pl,&nbsp;which&nbsp;automates&nbsp;a&nbsp;lot&nbsp;of<br>
-this.&nbsp;&nbsp;But&nbsp;you&nbsp;need&nbsp;to&nbsp;know&nbsp;this&nbsp;stuff&nbsp;anyway,&nbsp;right?<br>
-<br>
-&nbsp;&nbsp;I&nbsp;hope&nbsp;this&nbsp;database&nbsp;tutorial&nbsp;has&nbsp;been&nbsp;useful&nbsp;for&nbsp;you.&nbsp;&nbsp;If&nbsp;you&nbsp;have&nbsp;comments<br>
-to&nbsp;add,&nbsp;questions,&nbsp;concerns,&nbsp;etc.&nbsp;please&nbsp;direct&nbsp;them&nbsp;to<br>
-mbarnson@excitehome.net.&nbsp;&nbsp;Please&nbsp;direct&nbsp;flames&nbsp;to&nbsp;/dev/null&nbsp;:)&nbsp;&nbsp;Have&nbsp;a&nbsp;nice<br>
-day!<br>
-<br>
-<br>
-<br>
-===<br>
-LINKS<br>
-===<br>
-<br>
-Great&nbsp;MySQL&nbsp;tutorial&nbsp;site:<br>
-http://www.devshed.com/Server_Side/MySQL/<br>
-<br>
-	</P
-></DIV
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="dbschema.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="granttables.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Database Schema Chart</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="database.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->MySQL Permissions &#38; Grant Tables</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/dbschema.html

@@ -1,156 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Database Schema Chart</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="The Bugzilla Database"
-HREF="database.html"><LINK
-REL="PREVIOUS"
-TITLE="The Bugzilla Database"
-HREF="database.html"><LINK
-REL="NEXT"
-TITLE="MySQL Bugzilla Database Introduction"
-HREF="dbdoc.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="database.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Appendix C. The Bugzilla Database</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="dbdoc.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="dbschema">C.1. Database Schema Chart</H1
-><P
->&#13;      <DIV
-CLASS="mediaobject"
-><P
-><IMG
-SRC="../images/dbschema.jpg"><DIV
-CLASS="caption"
-><P
->Bugzilla database relationships chart</P
-></DIV
-></P
-></DIV
->
-    </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="database.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="dbdoc.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->The Bugzilla Database</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="database.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->MySQL Bugzilla Database Introduction</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/disclaimer.html

@@ -1,184 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Disclaimer</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="About This Guide"
-HREF="about.html"><LINK
-REL="PREVIOUS"
-TITLE="Copyright Information"
-HREF="copyright.html"><LINK
-REL="NEXT"
-TITLE="New Versions"
-HREF="newversions.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="copyright.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Chapter 1. About This Guide</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="newversions.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="disclaimer">1.3. Disclaimer</H1
-><P
->&#13;      No liability for the contents of this document can be accepted.
-      Use the concepts, examples, and other content at your own risk.
-      As this is a new edition of this document, there may be errors
-      and inaccuracies that may damage your system.  Use of this
-      document may cause your girlfriend to leave you, your cats to
-      pee on your furniture and clothing, your computer to cease
-      functioning, your boss to fire you, and global thermonuclear
-      war.  Proceed with caution.
-    </P
-><P
->&#13;      All copyrights are held by their respective owners, unless
-      specifically noted otherwise.  Use of a term in this document
-      should not be regarded as affecting the validity of any
-      trademark or service mark.
-    </P
-><P
->&#13;      Naming of particular products or brands should not be seen as
-      endorsements, with the exception of the term "GNU/Linux".  We
-      wholeheartedly endorse the use of GNU/Linux in every situation
-      where it is appropriate.  It is an extremely versatile, stable,
-      and robust operating system that offers an ideal operating
-      environment for Bugzilla.
-    </P
-><P
->&#13;      You are strongly recommended to make a backup of your system
-      before installing Bugzilla and at regular intervals thereafter.
-      If you implement any suggestion in this Guide, implement this one!
-    </P
-><P
->&#13;      Although the Bugzilla development team has taken great care to
-      ensure that all easily-exploitable bugs or options are
-      documented or fixed in the code, security holes surely exist.
-      Great care should be taken both in the installation and usage of
-      this software. Carefully consider the implications of installing
-      other network services with Bugzilla.  The Bugzilla development
-      team members, Netscape Communications, America Online Inc., and
-      any affiliated developers or sponsors assume no liability for
-      your use of this product.  You have the source code to this
-      product, and are responsible for auditing it yourself to insure
-      your security needs are met.
-    </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="copyright.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="newversions.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Copyright Information</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="about.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->New Versions</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/downloadlinks.html

@@ -1,237 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Software Download Links</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="The Bugzilla FAQ"
-HREF="faq.html"><LINK
-REL="NEXT"
-TITLE="The Bugzilla Database"
-HREF="database.html"></HEAD
-><BODY
-CLASS="appendix"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="faq.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="database.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="appendix"
-><H1
-><A
-NAME="downloadlinks">Appendix B. Software Download Links</H1
-><P
->&#13;    All of these sites are current as of April, 2001.  Hopefully
-    they'll stay current for a while.
-  </P
-><P
->&#13;    Apache Web Server: <A
-HREF="http://www.apache.org/"
-TARGET="_top"
->http://www.apache.org</A
->
-    Optional web server for Bugzilla, but recommended because of broad user base and support.
-  </P
-><P
->&#13;    Bugzilla: <A
-HREF="http://www.mozilla.org/projects/bugzilla/"
-TARGET="_top"
->&#13;      http://www.mozilla.org/projects/bugzilla/</A
->
-  </P
-><P
->&#13;    MySQL: <A
-HREF="http://www.mysql.com/"
-TARGET="_top"
->http://www.mysql.com/</A
->
-  </P
-><P
->&#13;    Perl: <A
-HREF="http://www.perl.org"
-TARGET="_top"
->http://www.perl.org/</A
->
-  </P
-><P
->&#13;    CPAN: <A
-HREF="http://www.cpan.org/"
-TARGET="_top"
->http://www.cpan.org/</A
->
-  </P
-><P
->&#13;    DBI Perl module: 
-    <A
-HREF="http://www.cpan.org/modules/by-module/DBI/"
-TARGET="_top"
->&#13;      http://www.cpan.org/modules/by-module/DBI/</A
->
-  </P
-><P
->&#13;    Data::Dumper module: 
-    <A
-HREF="http://www.cpan.org/modules/by-module/Data/"
-TARGET="_top"
->&#13;      http://www.cpan.org/modules/by-module/Data/</A
->
-  </P
-><P
->&#13;    MySQL related Perl modules:
-    <A
-HREF="http://www.cpan.org/modules/by-module/Mysql/"
-TARGET="_top"
->&#13;      http://www.cpan.org/modules/by-module/Mysql/</A
->
-  </P
-><P
->&#13;    TimeDate Perl module collection:
-    <A
-HREF="http://www.cpan.org/modules/by-module/Date/"
-TARGET="_top"
->&#13;      http://www.cpan.org/modules/by-module/Date/</A
->
-  </P
-><P
->&#13;    GD Perl module:
-    <A
-HREF="http://www.cpan.org/modules/by-module/GD/"
-TARGET="_top"
->&#13;      http://www.cpan.org/modules/by-module/GD/</A
->
-    Alternately, you should be able to find the latest version of
-    GD at <A
-HREF="http://www.boutell.com/gd/"
-TARGET="_top"
->http://www.boutell.com/gd/</A
->
-  </P
-><P
->&#13;    Chart::Base module:
-    <A
-HREF="http://www.cpan.org/modules/by-module/Chart/"
-TARGET="_top"
->&#13;    http://www.cpan.org/modules/by-module/Chart/</A
->
-  </P
-><P
->&#13;    LinuxDoc Software: 
-    <A
-HREF="http://www.linuxdoc.org/"
-TARGET="_top"
->http://www.linuxdoc.org/</A
->
-    (for documentation maintenance)
-  </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="faq.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="database.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->The Bugzilla FAQ</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->The Bugzilla Database</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/errata.html

@@ -1,279 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->ERRATA</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="Installation"
-HREF="installation.html"><LINK
-REL="PREVIOUS"
-TITLE="Installation"
-HREF="installation.html"><LINK
-REL="NEXT"
-TITLE="Step-by-step Install"
-HREF="stepbystep.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="installation.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Chapter 3. Installation</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="stepbystep.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="errata">3.1. ERRATA</H1
-><P
->Here are some miscellaneous notes about possible issues you
-      main run into when you begin your Bugzilla installation.
-      Reference platforms for Bugzilla installation are Redhat Linux
-      7.2, Linux-Mandrake 8.0, and Solaris 8.</P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->&#13;	If you are installing Bugzilla on S.u.S.e. Linux, or some
-	other distributions with <SPAN
-CLASS="QUOTE"
->"paranoid"</SPAN
-> security
-	options, it is possible that the checksetup.pl script may fail
-	with the error: <SPAN
-CLASS="errorname"
->cannot chdir(/var/spool/mqueue):
-	  Permission denied</SPAN
-> This is because your
-	<TT
-CLASS="filename"
->/var/spool/mqueue</TT
-> directory has a mode of
-	<SPAN
-CLASS="QUOTE"
->"drwx------"</SPAN
->.  Type <B
-CLASS="command"
->chmod 755
-	  <TT
-CLASS="filename"
->/var/spool/mqueue</TT
-></B
-> as root to
-	fix this problem.
-      </TD
-></TR
-><TR
-><TD
->&#13;	Bugzilla may be installed on Macintosh OS X (10), which is a
-	unix-based (BSD)  operating system. Everything required for
-	Bugzilla on OS X will install cleanly, but the optional GD
-	perl module which is used for bug charting requires some
-	additional setup for installation. Please see the  Mac OS X
-	installation section below for details
-      </TD
-></TR
-><TR
-><TD
->&#13;	Release Notes for Bugzilla 2.16 are available at
-	<TT
-CLASS="filename"
->docs/rel_notes.txt</TT
-> in your Bugzilla
-	source distribution.
-      </TD
-></TR
-><TR
-><TD
->&#13;	  The preferred documentation for Bugzilla is available in
-	docs/, with a variety of document types available.  Please
-	refer to these documents when  installing, configuring, and
-	maintaining your Bugzilla installation.
-      </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-><DIV
-CLASS="warning"
-><P
-></P
-><TABLE
-CLASS="warning"
-WIDTH="100%"
-BORDER="0"
-><TR
-><TD
-WIDTH="25"
-ALIGN="CENTER"
-VALIGN="TOP"
-><IMG
-SRC="../images/warning.gif"
-HSPACE="5"
-ALT="Warning"></TD
-><TD
-ALIGN="LEFT"
-VALIGN="TOP"
-><P
->&#13;	Bugzilla is not a package where you can just plop it in a directory,
-	twiddle a few things, and you're off.  Installing Bugzilla assumes you
-	know your variant of UNIX or Microsoft Windows well, are familiar with the
-	command line, and are comfortable compiling and installing a plethora
-	of third-party utilities.  To install Bugzilla on Win32 requires
-	fair Perl proficiency, and if you use a webserver other than Apache you
-	should be intimately familiar with the security mechanisms and CGI
-	environment thereof.
-      </P
-></TD
-></TR
-></TABLE
-></DIV
-><DIV
-CLASS="warning"
-><P
-></P
-><TABLE
-CLASS="warning"
-WIDTH="100%"
-BORDER="0"
-><TR
-><TD
-WIDTH="25"
-ALIGN="CENTER"
-VALIGN="TOP"
-><IMG
-SRC="../images/warning.gif"
-HSPACE="5"
-ALT="Warning"></TD
-><TD
-ALIGN="LEFT"
-VALIGN="TOP"
-><P
->&#13;	Bugzilla has not undergone a complete security review. Security holes
-	may exist in the code.  Great care should be taken both in the installation
-	and usage of this software.  Carefully consider the implications of
-	installing other network services with Bugzilla.
-      </P
-></TD
-></TR
-></TABLE
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="installation.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="stepbystep.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Installation</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="installation.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Step-by-step Install</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->

mozilla/webtools/bugzilla/docs/html/extraconfig.html

@@ -1,390 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Optional Additional Configuration</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
-"><LINK
-REL="HOME"
-TITLE="The Bugzilla Guide"
-HREF="index.html"><LINK
-REL="UP"
-TITLE="Installation"
-HREF="installation.html"><LINK
-REL="PREVIOUS"
-TITLE="Step-by-step Install"
-HREF="stepbystep.html"><LINK
-REL="NEXT"
-TITLE="Win32 Installation Notes"
-HREF="win32.html"></HEAD
-><BODY
-CLASS="section"
-BGCOLOR="#FFFFFF"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->The Bugzilla Guide</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="stepbystep.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
->Chapter 4. Installation</TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="win32.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="section"
-><H1
-CLASS="section"
-><A
-NAME="extraconfig">4.2. Optional Additional Configuration</H1
-><DIV
-CLASS="section"
-><H2
-CLASS="section"
-><A
-NAME="AEN836">4.2.1. Dependency Charts</H2
-><P
->As well as the text-based dependency graphs, Bugzilla also
-      supports dependency graphing, using a package called 'dot'.
-      Exactly how this works is controlled by the 'webdotbase' parameter.
-      </P
-><P
->(To be written...</P
-></DIV
-><DIV
-CLASS="section"
-><H2
-CLASS="section"
-><A
-NAME="AEN840">4.2.2. Bug Graphs</H2
-><P
->As long as you installed the GD and Graph::Base Perl modules you
-      might as well turn on the nifty Bugzilla bug reporting graphs.</P
-><P
->Add a cron entry like this to run 
-      <TT
-CLASS="filename"
->collectstats.pl</TT
-> 
-      daily at 5 after midnight: 
-      <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->&#13;          <TT
-CLASS="computeroutput"
->&#13;            <TT
-CLASS="prompt"
->bash#</TT
->
-
-            <B
-CLASS="command"
->crontab -e</B
->
-          </TT
->
-        </TD
-></TR
-><TR
-><TD
->&#13;          <TT
-CLASS="computeroutput"
->5 0 * * * cd &#60;your-bugzilla-directory&#62; ;
-          ./collectstats.pl</TT
->
-        </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
-      </P
-><P
->After two days have passed you'll be able to view bug graphs from
-      the Bug Reports page.</P
-></DIV
-><DIV
-CLASS="section"
-><H2
-CLASS="section"
-><A
-NAME="AEN853">4.2.3. The Whining Cron</H2
-><P
->By now you have a fully functional Bugzilla, but what good are
-      bugs if they're not annoying? To help make those bugs more annoying you
-      can set up Bugzilla's automatic whining system to complain at engineers
-      which leave their bugs in the NEW state without triaging them.
-      </P
-><P
->&#13;      This can be done by
-      adding the following command as a daily crontab entry (for help on that
-      see that crontab man page): 
-      <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->&#13;          <TT
-CLASS="computeroutput"
->&#13;            <B
-CLASS="command"
->cd &#60;your-bugzilla-directory&#62; ;
-            ./whineatnews.pl</B
->
-          </TT
->
-        </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
-      </P
-><DIV
-CLASS="tip"
-><P
-></P
-><TABLE
-CLASS="tip"
-WIDTH="100%"
-BORDER="0"
-><TR
-><TD
-WIDTH="25"
-ALIGN="CENTER"
-VALIGN="TOP"
-><IMG
-SRC="../images/tip.gif"
-HSPACE="5"
-ALT="Tip"></TD
-><TD
-ALIGN="LEFT"
-VALIGN="TOP"
-><P
->Depending on your system, crontab may have several manpages.
-        The following command should lead you to the most useful page for
-        this purpose: 
-        <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><FONT
-COLOR="#000000"
-><PRE
-CLASS="programlisting"
->man 5 crontab</PRE
-></FONT
-></TD
-></TR
-></TABLE
->
-        </P
-></TD
-></TR
-></TABLE
-></DIV
-></DIV
-><DIV
-CLASS="section"
-><H2
-CLASS="section"
-><A
-NAME="bzldap">4.2.4. LDAP Authentication</H2
-><P
->&#13;        <DIV
-CLASS="warning"
-><P
-></P
-><TABLE
-CLASS="warning"
-WIDTH="100%"
-BORDER="0"
-><TR
-><TD
-WIDTH="25"
-ALIGN="CENTER"
-VALIGN="TOP"
-><IMG
-SRC="../images/warning.gif"
-HSPACE="5"
-ALT="Warning"></TD
-><TD
-ALIGN="LEFT"
-VALIGN="TOP"
-><P
->This information on using the LDAP
-            authentication options with Bugzilla is old, and the authors do
-            not know of anyone who has tested it. Approach with caution.
-          </P
-></TD
-></TR
-></TABLE
-></DIV
->
-      </P
-><P
->&#13;      The existing authentication
-      scheme for Bugzilla uses email addresses as the primary user ID, and a
-      password to authenticate that user. All places within Bugzilla where
-      you need to deal with user ID (e.g assigning a bug) use the email
-      address. The LDAP authentication builds on top of this scheme, rather
-      than replacing it. The initial log in is done with a username and
-      password for the LDAP directory. This then fetches the email address
-      from LDAP and authenticates seamlessly in the standard Bugzilla
-      authentication scheme using this email address. If an account for this
-      address already exists in your Bugzilla system, it will log in to that
-      account. If no account for that email address exists, one is created at
-      the time of login. (In this case, Bugzilla will attempt to use the
-      "displayName" or "cn" attribute to determine the user's full name.)
-      After authentication, all other user-related tasks are still handled by
-      email address, not LDAP username. You still assign bugs by email
-      address, query on users by email address, etc.
-      </P
-><P
->Using LDAP for Bugzilla authentication requires the 
-      Mozilla::LDAP (aka PerLDAP) Perl module. The
-      Mozilla::LDAP module in turn requires Netscape's Directory SDK for C.
-      After you have installed the SDK, then install the PerLDAP module.
-      Mozilla::LDAP and the Directory SDK for C are both 
-      <A
-HREF="http://www.mozilla.org/directory/"
-TARGET="_top"
->available for
-      download</A
-> from mozilla.org. 
-      </P
-><P
->&#13;      Set the Param 'useLDAP' to "On" **only** if you will be using an LDAP
-      directory for
-      authentication. Be very careful when setting up this parameter; if you
-      set LDAP authentication, but do not have a valid LDAP directory set up,
-      you will not be able to log back in to Bugzilla once you log out. (If
-      this happens, you can get back in by manually editing the data/params
-      file, and setting useLDAP back to 0.)
-      </P
-><P
->If using LDAP, you must set the
-      three additional parameters: Set LDAPserver to the name (and optionally
-      port) of your LDAP server. If no port is specified, it defaults to the
-      default port of 389. (e.g "ldap.mycompany.com" or
-      "ldap.mycompany.com:1234") Set LDAPBaseDN to the base DN for searching
-      for users in your LDAP directory. (e.g. "ou=People,o=MyCompany") uids
-      must be unique under the DN specified here. Set LDAPmailattribute to
-      the name of the attribute in your LDAP directory which contains the
-      primary email address. On most directory servers available, this is
-      "mail", but you may need to change this.
-      </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="stepbystep.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="win32.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Step-by-step Install</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="installation.html"
-ACCESSKEY="U"
->Up</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Win32 Installation Notes</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->