"Automated configuration bump, release for firefox 3.0.19build1"

git-svn-id: svn://10.0.0.236/branches/release@259954 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/camino/config/version.txt

@@ -1 +0,0 @@
-2.0.4

mozilla/js/src/jsmath.c

@@ -1,532 +0,0 @@
-/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
- *
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Communicator client code, released
- * March 31, 1998.
- *
- * The Initial Developer of the Original Code is
- * Netscape Communications Corporation.
- * Portions created by the Initial Developer are Copyright (C) 1998
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either of the GNU General Public License Version 2 or later (the "GPL"),
- * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-/*
- * JS math package.
- */
-#include "jsstddef.h"
-#include "jslibmath.h"
-#include <stdlib.h>
-#include "jstypes.h"
-#include "jslong.h"
-#include "prmjtime.h"
-#include "jsapi.h"
-#include "jsatom.h"
-#include "jscntxt.h"
-#include "jsconfig.h"
-#include "jslock.h"
-#include "jsmath.h"
-#include "jsnum.h"
-#include "jsobj.h"
-
-#ifndef M_E
-#define M_E             2.7182818284590452354
-#endif
-#ifndef M_LOG2E
-#define M_LOG2E         1.4426950408889634074
-#endif
-#ifndef M_LOG10E
-#define M_LOG10E        0.43429448190325182765
-#endif
-#ifndef M_LN2
-#define M_LN2           0.69314718055994530942
-#endif
-#ifndef M_LN10
-#define M_LN10          2.30258509299404568402
-#endif
-#ifndef M_PI
-#define M_PI            3.14159265358979323846
-#endif
-#ifndef M_SQRT2
-#define M_SQRT2         1.41421356237309504880
-#endif
-#ifndef M_SQRT1_2
-#define M_SQRT1_2       0.70710678118654752440
-#endif
-
-static JSConstDoubleSpec math_constants[] = {
-    {M_E,       "E",            0, {0,0,0}},
-    {M_LOG2E,   "LOG2E",        0, {0,0,0}},
-    {M_LOG10E,  "LOG10E",       0, {0,0,0}},
-    {M_LN2,     "LN2",          0, {0,0,0}},
-    {M_LN10,    "LN10",         0, {0,0,0}},
-    {M_PI,      "PI",           0, {0,0,0}},
-    {M_SQRT2,   "SQRT2",        0, {0,0,0}},
-    {M_SQRT1_2, "SQRT1_2",      0, {0,0,0}},
-    {0,0,0,{0,0,0}}
-};
-
-JSClass js_MathClass = {
-    js_Math_str,
-    JSCLASS_HAS_CACHED_PROTO(JSProto_Math),
-    JS_PropertyStub,  JS_PropertyStub,  JS_PropertyStub,  JS_PropertyStub,
-    JS_EnumerateStub, JS_ResolveStub,   JS_ConvertStub,   JS_FinalizeStub,
-    JSCLASS_NO_OPTIONAL_MEMBERS
-};
-
-static JSBool
-math_abs(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_fabs(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_acos(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-#if !JS_USE_FDLIBM_MATH && defined(SOLARIS) && defined(__GNUC__)
-    if (x < -1 || 1 < x) {
-        *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNaN);
-        return JS_TRUE;
-    }
-#endif
-    z = fd_acos(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_asin(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-#if !JS_USE_FDLIBM_MATH && defined(SOLARIS) && defined(__GNUC__)
-    if (x < -1 || 1 < x) {
-        *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNaN);
-        return JS_TRUE;
-    }
-#endif
-    z = fd_asin(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_atan(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_atan(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_atan2(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, y, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    y = js_ValueToNumber(cx, &vp[3]);
-    if (JSVAL_IS_NULL(vp[3]))
-        return JS_FALSE;
-#if !JS_USE_FDLIBM_MATH && defined(_MSC_VER)
-    /*
-     * MSVC's atan2 does not yield the result demanded by ECMA when both x
-     * and y are infinite.
-     * - The result is a multiple of pi/4.
-     * - The sign of x determines the sign of the result.
-     * - The sign of y determines the multiplicator, 1 or 3.
-     */
-    if (JSDOUBLE_IS_INFINITE(x) && JSDOUBLE_IS_INFINITE(y)) {
-        z = fd_copysign(M_PI / 4, x);
-        if (y < 0)
-            z *= 3;
-        return js_NewDoubleInRootedValue(cx, z, vp);
-    }
-#endif
-
-#if !JS_USE_FDLIBM_MATH && defined(SOLARIS) && defined(__GNUC__)
-    if (x == 0) {
-        if (JSDOUBLE_IS_NEGZERO(y)) {
-            z = fd_copysign(M_PI, x);
-            return js_NewDoubleInRootedValue(cx, z, vp);
-        }
-        if (y == 0) {
-            z = x;
-            return js_NewDoubleInRootedValue(cx, z, vp);
-        }
-    }
-#endif
-    z = fd_atan2(x, y);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_ceil(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_ceil(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_cos(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_cos(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_exp(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-#ifdef _WIN32
-    if (!JSDOUBLE_IS_NaN(x)) {
-        if (x == *cx->runtime->jsPositiveInfinity) {
-            *vp = DOUBLE_TO_JSVAL(cx->runtime->jsPositiveInfinity);
-            return JS_TRUE;
-        }
-        if (x == *cx->runtime->jsNegativeInfinity) {
-            *vp = JSVAL_ZERO;
-            return JS_TRUE;
-        }
-    }
-#endif
-    z = fd_exp(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_floor(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_floor(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_log(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-#if !JS_USE_FDLIBM_MATH && defined(SOLARIS) && defined(__GNUC__)
-    if (x < 0) {
-        *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNaN);
-        return JS_TRUE;
-    }
-#endif
-    z = fd_log(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_max(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z = *cx->runtime->jsNegativeInfinity;
-    jsval *argv;
-    uintN i;
-
-    if (argc == 0) {
-        *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNegativeInfinity);
-        return JS_TRUE;
-    }
-    argv = vp + 2;
-    for (i = 0; i < argc; i++) {
-        x = js_ValueToNumber(cx, &argv[i]);
-        if (JSVAL_IS_NULL(argv[i]))
-            return JS_FALSE;
-        if (JSDOUBLE_IS_NaN(x)) {
-            *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNaN);
-            return JS_TRUE;
-        }
-        if (x == 0 && x == z && fd_copysign(1.0, z) == -1)
-            z = x;
-        else
-            z = (x > z) ? x : z;
-    }
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_min(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z = *cx->runtime->jsPositiveInfinity;
-    jsval *argv;
-    uintN i;
-
-    if (argc == 0) {
-        *vp = DOUBLE_TO_JSVAL(cx->runtime->jsPositiveInfinity);
-        return JS_TRUE;
-    }
-    argv = vp + 2;
-    for (i = 0; i < argc; i++) {
-        x = js_ValueToNumber(cx, &argv[i]);
-        if (JSVAL_IS_NULL(argv[i]))
-            return JS_FALSE;
-        if (JSDOUBLE_IS_NaN(x)) {
-            *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNaN);
-            return JS_TRUE;
-        }
-        if (x == 0 && x == z && fd_copysign(1.0,x) == -1)
-            z = x;
-        else
-            z = (x < z) ? x : z;
-    }
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_pow(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, y, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    y = js_ValueToNumber(cx, &vp[3]);
-    if (JSVAL_IS_NULL(vp[3]))
-        return JS_FALSE;
-#if !JS_USE_FDLIBM_MATH
-    /*
-     * Because C99 and ECMA specify different behavior for pow(),
-     * we need to wrap the libm call to make it ECMA compliant.
-     */
-    if (!JSDOUBLE_IS_FINITE(y) && (x == 1.0 || x == -1.0)) {
-        *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNaN);
-        return JS_TRUE;
-    }
-    /* pow(x, +-0) is always 1, even for x = NaN. */
-    if (y == 0) {
-        *vp = JSVAL_ONE;
-        return JS_TRUE;
-    }
-#endif
-    z = fd_pow(x, y);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static const int64 RNG_MULTIPLIER = 0x5DEECE66DLL;
-static const int64 RNG_ADDEND = 0xBLL;
-static const int64 RNG_MASK = (1LL << 48) - 1;
-static const jsdouble RNG_DSCALE = (1LL << 53);
-
-/*
- * Math.random() support, lifted from java.util.Random.java.
- */
-static inline void
-random_setSeed(JSContext *cx, int64 seed)
-{
-    cx->rngSeed = (seed ^ RNG_MULTIPLIER) & RNG_MASK;
-}
-
-void
-js_InitRandom(JSContext *cx)
-{
-    /*
-     * Set the seed from current time. Since we have a RNG per context and we often bring
-     * up several contexts at the same time, we xor in some additional values, namely
-     * the context and its successor. We don't just use the context because it might be
-     * possible to reverse engineer the context pointer if one guesses the time right.
-     */
-    random_setSeed(cx,
-                   (PRMJ_Now() / 1000) ^
-                   (int64)(cx) ^
-                   (int64)(cx->links.next));
-}
-
-static inline uint64
-random_next(JSContext *cx, int bits)
-{
-    uint64 nextseed = cx->rngSeed * RNG_MULTIPLIER;
-    nextseed += RNG_ADDEND;
-    nextseed &= RNG_MASK;
-    cx->rngSeed = nextseed;
-    return nextseed >> (48 - bits);
-}
-
-static inline jsdouble
-random_nextDouble(JSContext *cx)
-{
-    return (jsdouble)((random_next(cx, 26) << 27) + random_next(cx, 27)) / RNG_DSCALE;
-}
-
-static JSBool
-math_random(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble z = random_nextDouble(cx);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-#if defined _WIN32 && !defined WINCE && _MSC_VER < 1400
-/* Try to work around apparent _copysign bustage in VC6 and VC7. */
-double
-js_copysign(double x, double y)
-{
-    jsdpun xu, yu;
-
-    xu.d = x;
-    yu.d = y;
-    xu.s.hi &= ~JSDOUBLE_HI32_SIGNBIT;
-    xu.s.hi |= yu.s.hi & JSDOUBLE_HI32_SIGNBIT;
-    return xu.d;
-}
-#endif
-
-static JSBool
-math_round(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_copysign(fd_floor(x + 0.5), x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_sin(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_sin(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_sqrt(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_sqrt(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_tan(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_tan(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-#if JS_HAS_TOSOURCE
-static JSBool
-math_toSource(JSContext *cx, uintN argc, jsval *vp)
-{
-    *vp = ATOM_KEY(CLASS_ATOM(cx, Math));
-    return JS_TRUE;
-}
-#endif
-
-static JSFunctionSpec math_static_methods[] = {
-#if JS_HAS_TOSOURCE
-    JS_FN(js_toSource_str,  math_toSource,      0, 0, 0),
-#endif
-    JS_FN("abs",            math_abs,           1, 1, 0),
-    JS_FN("acos",           math_acos,          1, 1, 0),
-    JS_FN("asin",           math_asin,          1, 1, 0),
-    JS_FN("atan",           math_atan,          1, 1, 0),
-    JS_FN("atan2",          math_atan2,         2, 2, 0),
-    JS_FN("ceil",           math_ceil,          1, 1, 0),
-    JS_FN("cos",            math_cos,           1, 1, 0),
-    JS_FN("exp",            math_exp,           1, 1, 0),
-    JS_FN("floor",          math_floor,         1, 1, 0),
-    JS_FN("log",            math_log,           1, 1, 0),
-    JS_FN("max",            math_max,           0, 2, 0),
-    JS_FN("min",            math_min,           0, 2, 0),
-    JS_FN("pow",            math_pow,           2, 2, 0),
-    JS_FN("random",         math_random,        0, 0, 0),
-    JS_FN("round",          math_round,         1, 1, 0),
-    JS_FN("sin",            math_sin,           1, 1, 0),
-    JS_FN("sqrt",           math_sqrt,          1, 1, 0),
-    JS_FN("tan",            math_tan,           1, 1, 0),
-    JS_FS_END
-};
-
-JSObject *
-js_InitMathClass(JSContext *cx, JSObject *obj)
-{
-    JSObject *Math;
-
-    Math = JS_DefineObject(cx, obj, js_Math_str, &js_MathClass, NULL, 0);
-    if (!Math)
-        return NULL;
-    if (!JS_DefineFunctions(cx, Math, math_static_methods))
-        return NULL;
-    if (!JS_DefineConstDoubles(cx, Math, math_constants))
-        return NULL;
-    return Math;
-}

mozilla/js/src/jsmath.h

@@ -1,60 +0,0 @@
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Communicator client code, released
- * March 31, 1998.
- *
- * The Initial Developer of the Original Code is
- * Netscape Communications Corporation.
- * Portions created by the Initial Developer are Copyright (C) 1998-1999
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either of the GNU General Public License Version 2 or later (the "GPL"),
- * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-/* -*- Mode: C; tab-width: 8 -*-
- * Copyright (C) 1998-1999 Netscape Communications Corporation, All Rights Reserved.
- */
-
-#ifndef jsmath_h___
-#define jsmath_h___
-/*
- * JS math functions.
- */
-
-JS_BEGIN_EXTERN_C
-
-extern JSClass js_MathClass;
-
-extern JSObject *
-js_InitMathClass(JSContext *cx, JSObject *obj);
-
-extern void
-js_InitRandom(JSContext *cx);
-
-JS_END_EXTERN_C
-
-#endif /* jsmath_h___ */

mozilla/tools/tinderbox-configs/firefox/linux/mozconfig

@@ -0,0 +1,26 @@
+#
+## hostname: fx-linux-tbox
+## uname: Linux fx-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
+#
+
+export CFLAGS="-gstabs+"
+export CXXFLAGS="-gstabs+"
+
+mk_add_options MOZ_CO_PROJECT=browser
+mk_add_options PROFILE_GEN_SCRIPT=@TOPSRCDIR@/build/profile_pageloader.pl
+mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
+mk_add_options MOZ_MAKE_FLAGS="-j1"
+
+ac_add_options --enable-application=browser
+ac_add_options --enable-update-channel=release
+ac_add_options --enable-update-packaging
+
+# Don't add explicit optimize flags here, set them in configure.in, see bug 407794.
+ac_add_options --enable-optimize
+ac_add_options --disable-debug
+ac_add_options --disable-tests
+
+ac_add_options --enable-official-branding
+
+CC=/tools/gcc/bin/gcc
+CXX=/tools/gcc/bin/g++

mozilla/tools/tinderbox-configs/firefox/linux/tinder-config.pl

@@ -0,0 +1,268 @@
+#
+## hostname: fx-linux-tbox
+## uname: Linux fx-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$ENV{CVS_RSH} = "ssh";
+$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
+
+# To ensure Talkback client builds properly on some Linux boxen where LANG
+# is set to "en_US.UTF-8" by default, override that setting here by setting
+# it to "en_US.iso885915" (the setting on ocean).  Proper fix is to update
+# where xrestool is called in the build system so that 'LANG=C' in its
+# environment, according to bryner.
+$ENV{LANG} = "en_US.iso885915";
+
+# $ENV{MOZ_PACKAGE_MSI}
+#-----------------------------------------------------------------------------
+#  Default: 0
+#   Values: 0 | 1
+#  Purpose: Controls whether a MSI package is made.
+# Requires: Windows and a local MakeMSI installation.
+#$ENV{MOZ_PACKAGE_MSI} = 0;
+
+# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
+#-----------------------------------------------------------------------------
+#  Default: scp
+#   Values: scp | rsync
+#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
+# Requires: The selected type requires the command be available both locally
+#           and on the Talkback server.
+#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+$BuildAdministrator = 'build@mozilla.org';
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+
+#- You'll need to change these to suit your machine's needs
+$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+#$BuildDepend       = 1;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+#$BuildLocales      = 0;      # Do l10n packaging?
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = "Firefox";
+$VendorName               = 'Mozilla';
+
+$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
+$RegxpcomTest             = 1;
+$AliveTest                = 1;
+#$JavaTest                 = 0;
+#$ViewerTest               = 0;
+#$BloatTest                = 0;  # warren memory bloat test
+#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+#$DomToTextConversionTest  = 0;  
+#$XpcomGlueTest            = 0;
+$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+#$MailBloatTest            = 0;
+#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+$LayoutPerformanceTest    = 0;  # Tp
+$DHTMLPerformanceTest     = 0;  # Tdhtml
+#$QATest                   = 0;  
+#$XULWindowOpenTest        = 0;  # Txul
+$StartupPerformanceTest   = 0;  # Ts
+
+$TestsPhoneHome           = 0;  # Should test report back to server?
+$GraphNameOverride        = 'fx-linux-tbox';
+
+# $results_server
+#----------------------------------------------------------------------------
+# Server on which test results will be accessible.  This was originally tegu,
+# then became axolotl.  Once we moved services from axolotl, it was time
+# to give this service its own hostname to make future transitions easier.
+# - cmp@mozilla.org
+#$results_server           = "build-graphs.mozilla.org";
+
+#$pageload_server          = "spider";  # localhost
+$pageload_server      = "pageload.build.mozilla.org";
+
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 120;
+
+#$AliveTestTimeout                 = 45;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
+#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 15;    # seconds
+#$XULWindowOpenTestTimeout	      = 150;   # seconds
+
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+#$Make          = 'gmake';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+#$blat           = 'c:/nstools/bin/blat';
+#$use_blat       = 0;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+#$moz_cvsroot   = $ENV{CVSROOT};
+# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
+$moz_cvsroot   = 'cltbld@cvs.mozilla.org:/cvsroot';
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+$ObjDir = 'obj-fx-trunk';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'Release';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+# CONFIG: $BuildTree  = '%buildTree%';
+$BuildTree  = 'MozillaRelease';
+
+#$BuildName = '';
+# CONFIG: $BuildTag = '%productTag%_RELEASE';
+$BuildTag = 'FIREFOX_3_0_19_RELEASE';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'firefox-bin';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# Release build options
+$ReleaseBuild  = 1;
+$shiptalkback  = 0;
+$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
+$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
+$build_hour    = 4;
+$package_creation_path = "/browser/installer";
+# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
+$ssh_version   = "2";
+# CONFIG: $ssh_user      = "%sshUser%";
+$ssh_user      = "cltbld";
+# CONFIG: $ssh_server    = "%sshServer%";
+$ssh_server    = "stage-old.mozilla.org";
+$ftp_path      = "/home/ftp/pub/firefox/nightly";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly";
+$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
+$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
+# CONFIG: $milestone     = "firefox%version%";
+$milestone     = "firefox3.0.19";
+$notify_list   = 'build-announce@mozilla.org';
+$stub_installer = 0;
+$sea_installer = 0;
+$archive       = 1;
+$push_raw_xpis = 0;
+$update_pushinfo = 0;
+$update_package = 1;
+$update_product = "Firefox";
+$update_version = "trunk";
+$update_platform = "Linux_x86-gcc3";
+$update_hash = "sha1";
+$update_filehost = 'ftp.mozilla.org';
+$update_ver_file = 'browser/config/version.txt';
+$crashreporter_buildsymbols = 1;
+$crashreporter_pushsymbols = 1;
+# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
+$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
+# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
+$ENV{'SYMBOL_SERVER_USER'}    = 'ffxbld';
+# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
+$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_ffx';
+# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
+$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/home/cltbld/.ssh/ffxbld_dsa';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = '';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = '';
+
+# Prevent Extension Manager from spawning child processes during tests
+# - processes that tbox scripts cannot kill. 
+#$ENV{NO_EM_RESTART} = '1';
+
+# Do not build XForms
+$BuildXForms = 0;

mozilla/tools/tinderbox-configs/firefox/macosx/mozconfig

@@ -0,0 +1,26 @@
+#
+## hostname: bm-xserve08.build.mozilla.org
+## uname: Darwin bm-xserve08.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
+#
+
+# symbols for breakpad
+export CFLAGS="-g -gfull"
+export CXXFLAGS="-g -gfull"
+
+. $topsrcdir/build/macosx/universal/mozconfig
+
+mk_add_options MOZ_MAKE_FLAGS="-j1"
+mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
+mk_add_options MOZ_CO_PROJECT="browser"
+mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/../build/universal
+
+ac_add_options --enable-application=browser
+ac_add_options --enable-update-channel=release
+# Don't add explicit optimize flags here, set them in configure.in, see bug 407794.
+ac_add_options --enable-optimize
+ac_add_options --disable-debug
+ac_add_options --disable-tests
+ac_add_options --enable-update-packaging
+
+ac_add_options --enable-official-branding
+ac_add_app_options ppc --enable-prebinding

mozilla/tools/tinderbox-configs/firefox/macosx/tinder-config.pl

@@ -0,0 +1,267 @@
+#
+## hostname: bm-xserve08.build.mozilla.org
+## uname: Darwin bm-xserve08.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$ENV{NO_EM_RESTART} = "1";
+$ENV{DYLD_NO_FIX_PREBINDING} = "1";
+$ENV{LD_PREBIND_ALLOW_OVERLAP} = "1";
+$ENV{CVS_RSH} = "ssh";
+
+$MacUniversalBinary = 1;
+
+# $ENV{MOZ_PACKAGE_MSI}
+#-----------------------------------------------------------------------------
+#  Default: 0
+#   Values: 0 | 1
+#  Purpose: Controls whether a MSI package is made.
+# Requires: Windows and a local MakeMSI installation.
+#$ENV{MOZ_PACKAGE_MSI} = 0;
+
+# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
+#-----------------------------------------------------------------------------
+#  Default: scp
+#   Values: scp | rsync
+#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
+# Requires: The selected type requires the command be available both locally
+#           and on the Talkback server.
+#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+$BuildAdministrator = 'build@mozilla.org';
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+#$BuildDepend       = 1;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+#$BuildLocales      = 0;      # Do l10n packaging?
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = 'Firefox';
+$VendorName               = "Mozilla";
+
+$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
+$RegxpcomTest             = 1;
+$AliveTest                = 1;
+#$JavaTest                 = 0;
+#$ViewerTest               = 0;
+#$BloatTest                = 0;  # warren memory bloat test
+#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+#$DomToTextConversionTest  = 0;  
+#$XpcomGlueTest            = 0;
+$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+#$MailBloatTest            = 0;
+#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+$LayoutPerformanceTest    = 0;  # Tp
+$LayoutPerformanceLocalTest   = 0;  # Tp2
+$DHTMLPerformanceTest     = 0;  # Tdhtml
+#$QATest                   = 0;  
+$XULWindowOpenTest        = 0;  # Txul
+$StartupPerformanceTest   = 0;  # Ts
+
+$TestsPhoneHome           = 0;  # Should test report back to server?
+
+$GraphNameOverride        = 'xserve08.build.mozilla.org_Fx-Trunk';
+
+# $results_server
+#----------------------------------------------------------------------------
+# Server on which test results will be accessible.  This was originally tegu,
+# then became axolotl.  Once we moved services from axolotl, it was time
+# to give this service its own hostname to make future transitions easier.
+# - cmp@mozilla.org
+#$results_server           = "build-graphs.mozilla.org";
+
+#$pageload_server          = "spider";  # localhost
+$pageload_server          = "pageload.build.mozilla.org";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 120;
+
+$AliveTestTimeout                 = 10;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+$LayoutPerformanceTestTimeout     = 300;  # entire test, seconds
+$LayoutPerformanceLocalTestTimeout     = 180;  # entire test, seconds
+$DHTMLPerformanceTestTimeout      = 180;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 15;    # seconds
+#$XULWindowOpenTestTimeout	      = 150;   # seconds
+
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+#$Make          = 'gmake';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+#$blat           = 'c:/nstools/bin/blat';
+#$use_blat       = 0;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
+$moz_cvsroot   = 'cltbld@cvs.mozilla.org:/cvsroot';
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+$ObjDir = '../build/universal';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'Release';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+# CONFIG: $BuildTree  = '%buildTree%';
+$BuildTree  = 'MozillaRelease';
+
+#$BuildName = '';
+# CONFIG: $BuildTag = '%productTag%_RELEASE';
+$BuildTag = 'FIREFOX_3_0_19_RELEASE';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'firefox-bin';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# Release build options
+$ReleaseBuild  = 1;
+$shiptalkback  = 0;
+$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
+$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
+$build_hour    = "4";
+$package_creation_path = "/browser/installer";
+# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
+$mac_bundle_path = "/browser/app";
+$ssh_version   = "2";
+# CONFIG: $ssh_user      = "%sshUser%";
+$ssh_user      = "cltbld";
+# CONFIG: $ssh_server    = "%sshServer%";
+$ssh_server    = "stage-old.mozilla.org";
+$ftp_path      = "/home/ftp/pub/firefox/nightly";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly";
+$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
+$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
+# CONFIG: $milestone     = 'firefox%version%';
+$milestone     = 'firefox3.0.19';
+$notify_list   = "build-announce\@mozilla.org";
+$stub_installer = 0;
+$sea_installer = 0;
+$archive       = 1;
+$push_raw_xpis = 0;
+$update_package = 1;
+$update_product = "Firefox";
+$update_version = "trunk";
+$update_platform = "Darwin_Universal-gcc3";
+$update_hash = "sha1";
+$update_filehost = "ftp.mozilla.org";
+$update_ver_file = 'browser/config/version.txt';
+$update_pushinfo = 0;
+$crashreporter_buildsymbols = 1;
+$crashreporter_pushsymbols = 1;
+# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
+$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
+# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
+$ENV{'SYMBOL_SERVER_USER'}    = 'ffxbld';
+# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
+$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_ffx';
+# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
+$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/Users/cltbld/.ssh/ffxbld_dsa';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = '';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = '';
+
+# Prevent Extension Manager from spawning child processes during tests
+# - processes that tbox scripts cannot kill. 
+#$ENV{NO_EM_RESTART} = '1';
+
+# Do not build XForms
+$BuildXForms = 0;

mozilla/tools/tinderbox-configs/firefox/win32/mozconfig

@@ -0,0 +1,22 @@
+#
+## hostname: fx-win32-tbox
+## uname: MINGW32_NT-5.2 FX-WIN32-TBOX 1.0.11(0.46/3/2) 2007-01-12 12:05 i686 Msys
+#
+export CFLAGS="-GL -wd4624 -wd4952"
+export CXXFLAGS="-GL -wd4624 -wd4952"
+export LDFLAGS="-LTCG"
+
+mk_add_options MOZ_CO_PROJECT=browser
+mk_add_options MOZ_MAKE_FLAGS="-j1"
+mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
+mk_add_options PROFILE_GEN_SCRIPT='$(PYTHON) $(MOZ_OBJDIR)/_profile/pgo/profileserver.py'
+
+ac_add_options --enable-application=browser
+ac_add_options --enable-update-channel=release
+ac_add_options --enable-optimize
+ac_add_options --disable-debug
+ac_add_options --disable-tests
+ac_add_options --enable-update-packaging
+ac_add_options --enable-official-branding
+ac_add_options --enable-jemalloc
+ac_add_options --with-crashreporter-enable-percent=10

mozilla/tools/tinderbox-configs/firefox/win32/tinder-config.pl

@@ -0,0 +1,267 @@
+#
+## hostname: fx-win32-tbox
+## uname: MINGW32_NT-5.2 FX-WIN32-TBOX 1.0.11(0.46/3/2) 2007-01-12 12:05 i686 Msys
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$ENV{NO_EM_RESTART} = '1';
+$ENV{CVS_RSH} = "ssh";
+$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
+# Both these two variables are for source server support
+$ENV{PDBSTR_PATH} = 'C:\\Program Files\\Debugging Tools for Windows\\sdk\\srcsrv\\pdbstr.exe';
+$ENV{SRCSRV_ROOT} = ':pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot';
+
+# $ENV{MOZ_PACKAGE_MSI}
+#-----------------------------------------------------------------------------
+#  Default: 0
+#   Values: 0 | 1
+#  Purpose: Controls whether a MSI package is made.
+# Requires: Windows and a local MakeMSI installation.
+#$ENV{MOZ_PACKAGE_MSI} = 0;
+
+# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
+#-----------------------------------------------------------------------------
+#  Default: scp
+#   Values: scp | rsync
+#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
+# Requires: The selected type requires the command be available both locally
+#           and on the Talkback server.
+#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+$BuildAdministrator = 'build@mozilla.org';
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+#$BuildDepend       = 1;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+#$BuildLocales      = 0;      # Do l10n packaging?
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = "Firefox";
+$VendorName               = "Mozilla";
+
+$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
+$RegxpcomTest             = 1;
+$AliveTest                = 1;
+$JavaTest                 = 0;
+$ViewerTest               = 0;
+$BloatTest                = 0;  # warren memory bloat test
+$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+$DomToTextConversionTest  = 0;  
+$XpcomGlueTest            = 0;
+$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+$MailBloatTest            = 0;
+$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+$LayoutPerformanceTest    = 0;  # Tp
+$DHTMLPerformanceTest     = 0;  # Tdhtml
+$QATest                   = 0;  
+$XULWindowOpenTest        = 0;  # Txul
+$StartupPerformanceTest   = 0;  # Ts
+$NeckoUnitTest            = 0;
+$RenderPerformanceTest    = 0;  # Tgfx
+
+$TestsPhoneHome           = 0;  # Should test report back to server?
+$GraphNameOverride        = 'fx-win32-tbox';
+
+# $results_server
+#----------------------------------------------------------------------------
+# Server on which test results will be accessible.  This was originally tegu,
+# then became axolotl.  Once we moved services from axolotl, it was time
+# to give this service its own hostname to make future transitions easier.
+# - cmp@mozilla.org
+#$results_server           = "build-graphs.mozilla.org";
+
+$pageload_server          = "pageload.build.mozilla.org";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 120;
+
+#$AliveTestTimeout                 = 30;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+$LayoutPerformanceTestTimeout     = 800;  # entire test, seconds
+#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 20;    # seconds
+#$XULWindowOpenTestTimeout	      = 90;   # seconds
+#$NeckoUnitTestTimeout             = 30;    # seconds
+$RenderPerformanceTestTimeout     = 1800;  # seconds
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+$Make          = 'make';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+$blat           = '/d/mozilla-build/blat261/full/blat';
+#$use_blat       = 1;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+# CONFIG: $moz_cvsroot = '%mozillaCvsroot%';
+$moz_cvsroot = 'cltbld@cvs.mozilla.org:/cvsroot';
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+$ObjDir = 'obj-fx-trunk';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'Release';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+#$BuildTree  = 'MozillaTest';
+# CONFIG: $BuildTree  = '%buildTree%';
+$BuildTree  = 'MozillaRelease';
+
+#$BuildName = '';
+# CONFIG: $BuildTag = '%productTag%_RELEASE';
+$BuildTag = 'FIREFOX_3_0_19_RELEASE';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'firefox.exe';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+$ProfiledBuild = 1;
+# Release build options
+$ReleaseBuild  = 1;
+$shiptalkback  = 0;
+$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
+$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
+$build_hour    = "4";
+$package_creation_path = "/browser/installer";
+# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
+$ssh_version   = "2";
+# CONFIG: $ssh_user      = "%sshUser%";
+$ssh_user      = "cltbld";
+# CONFIG: $ssh_server    = "%sshServer%";
+$ssh_server    = "stage-old.mozilla.org";
+$ftp_path      = "/home/ftp/pub/firefox/nightly";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly";
+$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
+$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
+# CONFIG: $milestone     = 'firefox%version%';
+$milestone     = 'firefox3.0.19';
+$notify_list   = 'build-announce@mozilla.org';
+$stub_installer = 0;
+$sea_installer = 1;
+$archive       = 1;
+$push_raw_xpis = 0;
+$update_package = 1;
+$update_product = "Firefox";
+$update_version = "trunk";
+$update_platform = "WINNT_x86-msvc";
+$update_hash = "sha1";
+$update_filehost = "ftp.mozilla.org";
+$update_ver_file = 'browser/config/version.txt';
+$update_pushinfo = 0;
+$crashreporter_buildsymbols = 1;
+$crashreporter_pushsymbols = 1;
+# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
+$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
+# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
+$ENV{'SYMBOL_SERVER_USER'}    = 'ffxbld';
+# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
+$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_ffx';
+# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
+$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/c/Documents and Settings/cltbld/.ssh/ffxbld_dsa';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = '';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = '';
+
+# Prevent Extension Manager from spawning child processes during tests
+# - processes that tbox scripts cannot kill. 
+#$ENV{NO_EM_RESTART} = '1';
+
+# Do not build XForms
+$BuildXForms = 0;

mozilla/tools/tinderbox-configs/thunderbird/linux/CLOBBER

@@ -0,0 +1 @@
+Clobbering to force nightly due to nightly bustage from bug 428672.

mozilla/tools/tinderbox-configs/thunderbird/linux/mozconfig

@@ -0,0 +1,25 @@
+#
+## hostname: tb-linux-tbox
+## uname: Linux tb-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 athlon i386 GNU/Linux
+#
+
+# symbols for breakpad
+export CFLAGS="-gstabs+"
+export CXXFLAGS="-gstabs+"
+
+mk_add_options MOZ_CO_PROJECT=mail
+mk_add_options MOZ_MAKE_FLAGS=-j1
+mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
+
+ac_add_options --enable-application=mail
+ac_add_options --enable-update-channel=beta
+ac_add_options --disable-debug
+ac_add_options --enable-update-packaging
+# Add explicit optimize flags in configure.in, not here - see bug 407794
+ac_add_options --enable-optimize
+ac_add_options --disable-tests
+ac_add_options --disable-shared
+ac_add_options --enable-static
+
+CC=/tools/gcc-4.1.1/bin/gcc
+CXX=/tools/gcc-4.1.1/bin/g++

mozilla/tools/tinderbox-configs/thunderbird/linux/tinder-config.pl

@@ -0,0 +1,225 @@
+#
+## hostname: tb-linux-tbox
+## uname: Linux tbnewref-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 athlon i386 GNU/Linux
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$ENV{CVS_RSH} = "ssh";
+$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+$BuildDepend       = 0;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = "Thunderbird";
+#$VendorName               = "";
+
+$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
+#$RegxpcomTest             = 1;
+#$AliveTest                = 1;
+#$JavaTest                 = 0;
+#$ViewerTest               = 0;
+#$BloatTest                = 0;  # warren memory bloat test
+#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+#$DomToTextConversionTest  = 0;  
+#$XpcomGlueTest            = 0;
+$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+#$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+#$MailBloatTest            = 0;
+#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+#$LayoutPerformanceTest    = 0;  # Tp
+#$QATest                   = 0;  
+#$XULWindowOpenTest        = 0;  # Txul
+#$StartupPerformanceTest   = 0;  # Ts
+
+$TestsPhoneHome           = 0;  # Should test report back to server?
+#$results_server           = "axolotl.mozilla.org"; # was tegu
+#$pageload_server          = "spider";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 15;
+
+#$AliveTestTimeout                 = 45;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 60;    # seconds
+#$XULWindowOpenTestTimeout	      = 150;   # seconds
+
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+#$Make          = 'gmake';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+#$blat           = 'c:/nstools/bin/blat';
+#$use_blat       = 0;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
+$moz_cvsroot   = 'cltbld@cvs.mozilla.org:/cvsroot';
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+$ObjDir = 'obj-tb-trunk';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'Release';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+# CONFIG: $BuildTree  = '%buildTree%';
+$BuildTree  = 'MozillaRelease';
+
+#$BuildName = '';
+# CONFIG: $BuildTag = '%productTag%_RELEASE';
+$BuildTag = 'THUNDERBIRD_3_0a2_RELEASE';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'thunderbird-bin';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# allow override of timezone value (for win32 POSIX::strftime)
+#$Timezone = '';
+
+# Release build options
+$ReleaseBuild  = 1;
+$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
+$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
+$shiptalkback  = 0;
+$build_hour    = "3";
+$package_creation_path = "/mail/installer";
+$ssh_version   = "2";
+# CONFIG: $ssh_user      = "%sshUser%";
+$ssh_user      = "cltbld";
+# CONFIG: $ssh_server    = "%sshServer%";
+$ssh_server    = "stage-old.mozilla.org";
+#$ReleaseGroup  = "thunderbird";
+$ftp_path      = "/home/ftp/pub/thunderbird/nightly";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/nightly";
+$tbox_ftp_path = "/home/ftp/pub/thunderbird/tinderbox-builds";
+$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/tinderbox-builds";
+# CONFIG: $milestone     = 'thunderbird%version%';
+$milestone     = 'thunderbird3.0a2';
+$notify_list   = "build-announce\@mozilla.org";
+$stub_installer = 0;
+$sea_installer = 0;
+$archive       = 1;
+$update_package = 1;
+$update_product = "Thunderbird";
+$update_version = "trunk";
+$update_platform = "Linux_x86-gcc3";
+$update_hash = "sha1";
+$update_filehost = "ftp.mozilla.org";
+$update_ver_file = "mail/config/version.txt";
+$update_pushinfo = 0;
+$crashreporter_buildsymbols = 1;
+$crashreporter_pushsymbols = 1;
+# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
+$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
+# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
+$ENV{'SYMBOL_SERVER_USER'}    = 'tbirdbld';
+# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
+$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_tbrd';
+# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
+$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/home/cltbld/.ssh/tbirdbld_dsa';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = 'bzip2';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = 'base64';
+
+

mozilla/tools/tinderbox-configs/thunderbird/macosx/CLOBBER

@@ -0,0 +1 @@
+Clobbering to force nightly due to nightly bustage from bug 428672.

mozilla/tools/tinderbox-configs/thunderbird/macosx/mozconfig

@@ -0,0 +1,28 @@
+#
+## hostname: bm-xserve07.build.mozilla.org
+## uname: Darwin bm-xserve07.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
+#
+
+# symbols for breakpad
+export CFLAGS="-g -gfull"
+export CXXFLAGS="-g -gfull"
+
+. $topsrcdir/build/macosx/universal/mozconfig
+
+# Make flags
+mk_add_options MOZ_CO_PROJECT=mail
+mk_add_options MOZ_MAKE_FLAGS="-j1"
+mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
+mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/../build/universal
+
+# Configure flags
+ac_add_options --enable-application=mail
+ac_add_options --enable-update-channel=beta
+# Add explicit optimize flags in configure.in, not here - see bug 407794
+ac_add_options --enable-optimize
+ac_add_options --disable-debug
+ac_add_options --disable-tests
+ac_add_options --enable-static
+ac_add_options --disable-shared
+
+ac_add_options --enable-update-packaging

mozilla/tools/tinderbox-configs/thunderbird/macosx/tinder-config.pl

@@ -0,0 +1,262 @@
+#
+## hostname: bm-xserve07.build.mozilla.org
+## uname: Darwin bm-xserve07.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+# $ENV{NO_EM_RESTART} = "1";
+# $ENV{DYLD_NO_FIX_PREBINDING} = "1";
+# $ENV{LD_PREBIND_ALLOW_OVERLAP} = "1";
+$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
+
+$MacUniversalBinary = 1;
+
+# $ENV{MOZ_PACKAGE_MSI}
+#-----------------------------------------------------------------------------
+#  Default: 0
+#   Values: 0 | 1
+#  Purpose: Controls whether a MSI package is made.
+# Requires: Windows and a local MakeMSI installation.
+#$ENV{MOZ_PACKAGE_MSI} = 0;
+
+# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
+#-----------------------------------------------------------------------------
+#  Default: scp
+#   Values: scp | rsync
+#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
+# Requires: The selected type requires the command be available both locally
+#           and on the Talkback server.
+#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+$BuildAdministrator = 'build@mozilla.org';
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+#$BuildDepend       = 1;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+#$BuildLocales      = 0;      # Do l10n packaging?
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = "Thunderbird";
+#$VendorName               = 'Mozilla';
+
+$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
+$RegxpcomTest             = 1;
+$AliveTest                = 1;
+#$JavaTest                 = 0;
+#$ViewerTest               = 0;
+#$BloatTest                = 0;  # warren memory bloat test
+#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+#$DomToTextConversionTest  = 0;  
+#$XpcomGlueTest            = 0;
+$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+#$MailBloatTest            = 0;
+#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+#$LayoutPerformanceTest    = 0;  # Tp
+#$DHTMLPerformanceTest     = 0;  # Tdhtml
+#$QATest                   = 0;  
+#$XULWindowOpenTest        = 0;  # Txul
+#$StartupPerformanceTest   = 0;  # Ts
+
+$TestsPhoneHome           = 0;  # Should test report back to server?
+
+# $results_server
+#----------------------------------------------------------------------------
+# Server on which test results will be accessible.  This was originally tegu,
+# then became axolotl.  Once we moved services from axolotl, it was time
+# to give this service its own hostname to make future transitions easier.
+# - cmp@mozilla.org
+#$results_server           = "build-graphs.mozilla.org";
+
+#$pageload_server          = "spider";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 120;
+
+#$AliveTestTimeout                 = 45;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
+#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 15;    # seconds
+#$XULWindowOpenTestTimeout	      = 150;   # seconds
+
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+#$Make          = 'gmake';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+#$blat           = 'c:/nstools/bin/blat';
+#$use_blat       = 0;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+#$moz_cvsroot   = $ENV{CVSROOT};
+# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
+$moz_cvsroot   = 'cltbld@cvs.mozilla.org:/cvsroot';
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+$ObjDir = '../build/universal';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'Release';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+#$BuildTree  = 'MozillaTest';
+# CONFIG: $BuildTree  = '%buildTree%';
+$BuildTree  = 'MozillaRelease';
+
+#$BuildName = '';
+# CONFIG: $BuildTag = '%productTag%_RELEASE';
+$BuildTag = 'THUNDERBIRD_3_0a2_RELEASE';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'thunderbird-bin';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# Release build options
+$ReleaseBuild  = 1;
+$shiptalkback  = 0;
+$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
+$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
+$build_hour    = "3";
+$package_creation_path = "/mail/installer";
+# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
+$mac_bundle_path = "/mail/app";
+$ssh_version   = "2";
+# CONFIG: $ssh_user      = "%sshUser%";
+$ssh_user      = "cltbld";
+# CONFIG: $ssh_server    = "%sshServer%";
+$ssh_server    = "stage-old.mozilla.org";
+#$ReleaseGroup  = "thunderbird";
+$ftp_path      = "/home/ftp/pub/thunderbird/nightly";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/nightly";
+$tbox_ftp_path = "/home/ftp/pub/thunderbird/tinderbox-builds";
+$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/tinderbox-builds";
+# CONFIG: $milestone     = 'thunderbird%version%';
+$milestone     = 'thunderbird3.0a2';
+$notify_list   = "build-announce\@mozilla.org";
+$stub_installer = 0;
+$sea_installer = 0;
+$archive       = 1;
+$push_raw_xpis = 0;
+$update_package = 1;
+$update_product = "Thunderbird";
+$update_version = "trunk";
+$update_platform = "Darwin_Universal-gcc3";
+$update_hash = "sha1";
+$update_filehost = "ftp.mozilla.org";
+$update_ver_file = "mail/config/version.txt";
+$update_pushinfo = 0;
+$crashreporter_buildsymbols = 1;
+$crashreporter_pushsymbols = 1;
+# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
+$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
+# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
+$ENV{'SYMBOL_SERVER_USER'}    = 'tbirdbld';
+# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
+$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_tbrd';
+# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
+$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/Users/cltbld/.ssh/tbirdbld_dsa';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = '';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = '';
+
+# Prevent Extension Manager from spawning child processes during tests
+# - processes that tbox scripts cannot kill. 
+#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/thunderbird/win32/CLOBBER

@@ -0,0 +1 @@
+Clobbering to force nightly due to nightly bustage from bug 428672.

mozilla/tools/tinderbox-configs/thunderbird/win32/mozconfig

@@ -0,0 +1,22 @@
+#
+## hostname: tbnewref-win32-tbox
+## MINGW32_NT-5.2 TBNEWREF-WIN32- 1.0.11(0.46/3/2) 2007-01-12 12:05 i686 Msys
+#
+
+mk_add_options MOZ_CO_PROJECT=mail
+mk_add_options MOZ_DEBUG_SYMBOLS=1
+mk_add_options MOZ_MAKE_FLAGS=-j1
+mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
+
+ac_add_options --enable-application=mail
+ac_add_options --enable-update-channel=beta
+ac_add_options --disable-debug
+# Add explicit optimize flags in configure.in, not here - see bug 407794
+ac_add_options --enable-optimize
+ac_add_options --disable-tests
+ac_add_options --disable-shared
+ac_add_options --enable-static
+ac_add_options --enable-update-packaging
+
+export WIN32_REDIST_DIR="/d/msvs8/VC/redist/x86/Microsoft.VC80.CRT"
+

mozilla/tools/tinderbox-configs/thunderbird/win32/tinder-config.pl

@@ -0,0 +1,235 @@
+#
+## hostname: tbnewref-win32-tbox
+## MINGW32_NT-5.2 TBNEWREF-WIN32- 1.0.11(0.46/3/2) 2007-01-12 12:05 i686 Msys
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$ENV{CVSROOT}=":ext:tbirdbld\@cvs.mozilla.org:/cvsroot";
+$ENV{MOZ_INSTALLER_USE_7ZIP}="1";
+$ENV{MOZ_PACKAGE_MSI} = 0;
+$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
+# Both these two variables are for source server support
+$ENV{PDBSTR_PATH} = 'C:\\Program Files\\Debugging Tools for Windows\\sdk\\srcsrv\\pdbstr.exe';
+$ENV{SRCSRV_ROOT} = ':pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot';
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+$BuildDepend       = 0;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+#$BuildLocales      = 0;      # Do l10n packaging?
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = "Thunderbird";
+#$VendorName               = '';
+
+$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
+#$RegxpcomTest             = 1;
+#$AliveTest                = 1;
+#$JavaTest                 = 0;
+#$ViewerTest               = 0;
+#$BloatTest                = 0;  # warren memory bloat test
+#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+#$DomToTextConversionTest  = 0;  
+#$XpcomGlueTest            = 0;
+#$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+#$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+#$MailBloatTest            = 0;
+#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+#$LayoutPerformanceTest    = 0;  # Tp
+#$DHTMLPerformanceTest     = 0;  # Tdhtml
+#$QATest                   = 0;  
+#$XULWindowOpenTest        = 0;  # Txul
+#$StartupPerformanceTest   = 0;  # Ts
+
+$TestsPhoneHome           = 0;  # Should test report back to server?
+#$results_server           = "axolotl.mozilla.org"; # was tegu
+#$pageload_server          = "spider";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 120;
+
+#$AliveTestTimeout                 = 45;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
+#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 15;    # seconds
+#$XULWindowOpenTestTimeout	      = 150;   # seconds
+
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+$Make          = 'make';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+$blat           = '/d/mozilla-build/blat261/full/blat';
+$use_blat       = 0;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+# CONFIG: $moz_cvsroot = '%mozillaCvsroot%';
+$moz_cvsroot = 'cltbld@cvs.mozilla.org:/cvsroot';
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+$ObjDir = 'obj-tb-trunk';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'Release';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+# CONFIG: $BuildTree  = '%buildTree%';
+$BuildTree  = 'MozillaRelease';
+
+#$BuildName = '';
+# CONFIG: $BuildTag = '%productTag%_RELEASE';
+$BuildTag = 'THUNDERBIRD_3_0a2_RELEASE';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'thunderbird.exe';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# Release build options
+$ReleaseBuild  = 1;
+$shiptalkback  = 0;
+$ReleaseToLatest = 0;
+$ReleaseToDated = 1;
+$build_hour    = "3";
+$package_creation_path = "/mail/installer";
+# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
+$ssh_version   = "2";
+# CONFIG: $ssh_user      = "%sshUser%";
+$ssh_user      = "cltbld";
+# CONFIG: $ssh_server    = "%sshServer%";
+$ssh_server    = "stage-old.mozilla.org";
+#$ReleaseGroup  = "thunderbird";
+$ftp_path      = "/home/ftp/pub/thunderbird/nightly";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/nightly";
+$tbox_ftp_path      = "/home/ftp/pub/thunderbird/tinderbox-builds";
+$tbox_url_path      = "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/tinderbox-builds";
+# CONFIG: $milestone     = 'thunderbird%version%';
+$milestone     = 'thunderbird3.0a2';
+$notify_list   = "build-announce\@mozilla.org";
+$stub_installer = 0;
+$sea_installer = 1;
+$archive       = 1;
+$push_raw_xpis = 1;
+
+$update_package = 1;
+$update_product = "Thunderbird";
+$update_version = "trunk";
+$update_ver_file = "mail/config/version.txt";
+$update_platform = "WINNT_x86-msvc";
+$update_hash = "sha1";
+$update_filehost = "ftp.mozilla.org";
+$update_pushinfo = 0;
+$crashreporter_buildsymbols = 1;
+$crashreporter_pushsymbols = 1;
+# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
+$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
+# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
+$ENV{'SYMBOL_SERVER_USER'}    = 'tbirdbld';
+# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
+$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_tbrd';
+# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
+$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/c/Documents and Settings/cltbld/.ssh/tbirdbld_dsa';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = '';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = '';
+
+# Prevent Extension Manager from spawning child processes during tests
+# - processes that tbox scripts cannot kill. 
+#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/xulrunner/linux/CLOBBER

@@ -0,0 +1 @@
+Clobbering to fix up checkout issues

mozilla/tools/tinderbox-configs/xulrunner/linux/mozconfig

@@ -0,0 +1,17 @@
+#
+## hostname: xr-linux-tbox
+## uname: Linux xr-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
+#
+
+export MOZILLA_OFFICIAL=1
+export JAVA_HOME=/tools/jdk
+mk_add_options MOZILLA_OFFICIAL=1
+
+mk_add_options MOZ_CO_PROJECT=xulrunner
+mk_add_options MOZ_MAKE_FLAGS="-j3"
+
+ac_add_options --enable-application=xulrunner
+ac_add_options --disable-tests
+
+CC=/tools/gcc-4.1.1/bin/gcc
+CXX=/tools/gcc-4.1.1/bin/g++

mozilla/tools/tinderbox-configs/xulrunner/linux/tinder-config.pl

@@ -0,0 +1,262 @@
+#
+## hostname: xr-linux-tbox
+## uname: Linux xr-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
+
+# $ENV{MOZ_PACKAGE_MSI}
+#-----------------------------------------------------------------------------
+#  Default: 0
+#   Values: 0 | 1
+#  Purpose: Controls whether a MSI package is made.
+# Requires: Windows and a local MakeMSI installation.
+#$ENV{MOZ_PACKAGE_MSI} = 0;
+
+# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
+#-----------------------------------------------------------------------------
+#  Default: scp
+#   Values: scp | rsync
+#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
+# Requires: The selected type requires the command be available both locally
+#           and on the Talkback server.
+#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+$BuildAdministrator = "build\@mozilla.org";
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+#$BuildDepend       = 1;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$ConfigureOnly     = 0;      # Configure, but do not build.
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+#$BuildLocales      = 0;      # Do l10n packaging?
+$BuildSDK           = 1;      # Build the SDK
+
+# Only used when $BuildLocales = 1
+%WGetFiles         = ();  # Pull files from the web, URL => Location
+#$WGetTimeout       = 360; # Wget timeout, in seconds
+#$BuildLocalesArgs  = "";  # Extra attributes to add to the makefile command
+                          # which builds the "installers-<locale>" target.
+                          # Typically used to set ZIP_IN and WIN32_INSTALLER_IN
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = "XULRunner";
+$VendorName               = 'Mozilla';
+
+$RunMozillaTests          = 0;  # Allow turning off of all tests if needed.
+#$RegxpcomTest             = 1;
+#$AliveTest                = 1;
+#$JavaTest                 = 0;
+#$ViewerTest               = 0;
+#$BloatTest                = 0;  # warren memory bloat test
+#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+#$DomToTextConversionTest  = 0;  
+#$XpcomGlueTest            = 0;
+#$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+#$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+#$MailBloatTest            = 0;
+#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+#$LayoutPerformanceTest    = 0;  # Tp
+#$DHTMLPerformanceTest     = 0;  # Tdhtml
+#$QATest                   = 0;  
+#$XULWindowOpenTest        = 0;  # Txul
+#$StartupPerformanceTest   = 0;  # Ts
+#@CompareLocaleDirs        = (); # Run compare-locales test on these directories
+# ("network","dom","toolkit","security/manager");
+#$CompareLocalesAviary     = 0;  # Should the compare-locales commands use the
+                                # aviary directory structure?
+
+#$TestsPhoneHome           = 0;  # Should test report back to server?
+
+# $results_server
+#----------------------------------------------------------------------------
+# Server on which test results will be accessible.  This was originally tegu,
+# then became axolotl.  Once we moved services from axolotl, it was time
+# to give this service its own hostname to make future transitions easier.
+# - cmp@mozilla.org
+#$results_server           = "build-graphs.mozilla.org";
+
+#$pageload_server          = "spider";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 120;
+
+#$AliveTestTimeout                 = 45;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
+#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 15;    # seconds
+#$XULWindowOpenTestTimeout	      = 150;   # seconds
+
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+#$Make          = 'gmake';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+#$blat           = 'c:/nstools/bin/blat';
+#$use_blat       = 0;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+#$moz_cvsroot   = $ENV{CVSROOT};
+# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
+$moz_cvsroot   = 'cltbld@cvs.mozilla.org:/cvsroot';
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+$ObjDir = 'obj-xulrunner';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'Release';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+# CONFIG: $BuildTree  = '%buildTree%';
+$BuildTree  = 'MozillaRelease';
+
+#$BuildName = '';
+# CONFIG: $BuildTag = '%productTag%_RELEASE';
+$BuildTag = 'FIREFOX_3_0_17_RELEASE';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'xulrunner-bin';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# Release build options
+$ReleaseBuild  = 1;
+#$LocaleProduct = "browser";
+$shiptalkback  = 0;
+$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
+$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
+#$build_hour    = "8";
+$package_creation_path = "/xulrunner/installer";
+# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
+$ssh_version   = "2";
+# CONFIG: $ssh_user      = "%sshUser%";
+$ssh_user      = "cltbld";
+#$ssh_key       = "$ENV{HOME}/.ssh/xrbld_dsa";
+# CONFIG: $ssh_server    = "%sshServer%";
+$ssh_server    = "stage-old.mozilla.org";
+$ReleaseGroup  = "xulrunner";
+$ftp_path      = "/home/ftp/pub/xulrunner/nightly";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/xulrunner/nightly";
+$tbox_ftp_path = "/home/ftp/pub/xulrunner/tinderbox-builds";
+$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/xulrunner/tinderbox-builds";
+# CONFIG: $milestone     = "xulrunner%version%";
+$milestone     = "xulrunner1.9.0.17";
+$notify_list   = "build-announce\@mozilla.org";
+$stub_installer = 0;
+$sea_installer = 0;
+$archive       = 1;
+$push_raw_xpis = 0;
+$crashreporter_buildsymbols = 0;
+$crashreporter_pushsymbols = 0;
+# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
+$ENV{'SYMBOL_SERVER_HOST'}    = 'stage-old.mozilla.org';
+# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
+$ENV{'SYMBOL_SERVER_USER'}    = 'xrbld';
+# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
+$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_xr';
+# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
+$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/home/cltbld/.ssh/xrbld_dsa';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = '';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = '';
+
+# Prevent Extension Manager from spawning child processes during tests
+# - processes that tbox scripts cannot kill. 
+#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/xulrunner/macosx/CLOBBER

@@ -0,0 +1 @@
+CLOBBERing to disable zipwriter from bug 379633

mozilla/tools/tinderbox-configs/xulrunner/macosx/mozconfig

@@ -0,0 +1,20 @@
+#
+## hostname: bm-xserve09.build.mozilla.org
+## uname: Darwin bm-xserve09.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
+#
+
+. $topsrcdir/build/macosx/universal/mozconfig
+
+export MOZILLA_OFFICIAL=1
+export JAVA_HOME=/System/Library/Frameworks/JavaVM.framework/Home
+mk_add_options MOZILLA_OFFICIAL=1
+
+mk_add_options MOZ_CO_PROJECT=xulrunner
+mk_add_options MOZ_MAKE_FLAGS="-j8"
+mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/../build/universal
+
+ac_add_options --enable-application=xulrunner
+ac_add_options --disable-tests
+ac_add_options --enable-svg
+ac_add_options --enable-canvas
+ac_add_app_options ppc --enable-prebinding

mozilla/tools/tinderbox-configs/xulrunner/macosx/tinder-config.pl

@@ -0,0 +1,268 @@
+#
+## hostname: bm-xserve09.build.mozilla.org
+## uname: Darwin bm-xserve09.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$MacUniversalBinary = 1;
+
+$ENV{CHOWN_ROOT} = "/builds/tinderbox/bin/chown_root";
+$ENV{REVERT_ROOT} = "/builds/tinderbox/bin/revert_root";
+$ENV{CHOWN_REVERT} = $ENV{REVERT_ROOT};
+$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
+
+# $ENV{MOZ_PACKAGE_MSI}
+#-----------------------------------------------------------------------------
+#  Default: 0
+#   Values: 0 | 1
+#  Purpose: Controls whether a MSI package is made.
+# Requires: Windows and a local MakeMSI installation.
+#$ENV{MOZ_PACKAGE_MSI} = 0;
+
+# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
+#-----------------------------------------------------------------------------
+#  Default: scp
+#   Values: scp | rsync
+#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
+# Requires: The selected type requires the command be available both locally
+#           and on the Talkback server.
+#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+$BuildAdministrator = "build\@mozilla.org";
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+#$BuildDepend       = 1;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$ConfigureOnly     = 0;      # Configure, but do not build.
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+#$BuildLocales      = 0;      # Do l10n packaging?
+$BuildSDK           = 1;      # Build the SDK
+
+# Only used when $BuildLocales = 1
+%WGetFiles         = ();  # Pull files from the web, URL => Location
+#$WGetTimeout       = 360; # Wget timeout, in seconds
+#$BuildLocalesArgs  = "";  # Extra attributes to add to the makefile command
+                          # which builds the "installers-<locale>" target.
+                          # Typically used to set ZIP_IN and WIN32_INSTALLER_IN
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = "XULRunner";
+$VendorName               = 'Mozilla';
+
+$RunMozillaTests          = 0;  # Allow turning off of all tests if needed.
+#$RegxpcomTest             = 1;
+#$AliveTest                = 1;
+#$JavaTest                 = 0;
+#$ViewerTest               = 0;
+#$BloatTest                = 0;  # warren memory bloat test
+#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+#$DomToTextConversionTest  = 0;  
+#$XpcomGlueTest            = 0;
+#$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+#$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+#$MailBloatTest            = 0;
+#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+#$LayoutPerformanceTest    = 0;  # Tp
+#$DHTMLPerformanceTest     = 0;  # Tdhtml
+#$QATest                   = 0;  
+#$XULWindowOpenTest        = 0;  # Txul
+#$StartupPerformanceTest   = 0;  # Ts
+#@CompareLocaleDirs        = (); # Run compare-locales test on these directories
+# ("network","dom","toolkit","security/manager");
+#$CompareLocalesAviary     = 0;  # Should the compare-locales commands use the
+                                # aviary directory structure?
+
+#$TestsPhoneHome           = 0;  # Should test report back to server?
+
+# $results_server
+#----------------------------------------------------------------------------
+# Server on which test results will be accessible.  This was originally tegu,
+# then became axolotl.  Once we moved services from axolotl, it was time
+# to give this service its own hostname to make future transitions easier.
+# - cmp@mozilla.org
+#$results_server           = "build-graphs.mozilla.org";
+
+#$pageload_server          = "spider";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 120;
+
+#$AliveTestTimeout                 = 45;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
+#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 15;    # seconds
+#$XULWindowOpenTestTimeout	      = 150;   # seconds
+
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+#$Make          = 'gmake';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+#$blat           = 'c:/nstools/bin/blat';
+#$use_blat       = 0;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+# sharing bm-xserve09 with T'bird build, do all CVS pulls with that key
+# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
+$moz_cvsroot   = 'cltbld@cvs.mozilla.org:/cvsroot';
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+$ObjDir = '../build/universal';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'Release';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+# CONFIG: $BuildTree  = '%buildTree%';
+$BuildTree  = 'MozillaRelease';
+
+#$BuildName = '';
+# CONFIG: $BuildTag = '%productTag%_RELEASE';
+$BuildTag = 'FIREFOX_3_0_17_RELEASE';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'xulrunner-bin';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# Release build options
+$ReleaseBuild  = 1;
+#$LocaleProduct = "browser";
+$shiptalkback  = 0;
+$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
+$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
+#$build_hour    = "8";
+$package_creation_path = "/xulrunner/installer";
+# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
+$mac_bundle_path = "/browser/app";
+$ssh_version   = "2";
+# CONFIG: $ssh_user      = "%sshUser%";
+$ssh_user      = "cltbld";
+#$ssh_key       = "$ENV{HOME}/.ssh/xrbld_dsa";
+# CONFIG: $ssh_server    = "%sshServer%";
+$ssh_server    = "stage-old.mozilla.org";
+$ReleaseGroup  = "xulrunner";
+$ftp_path      = "/home/ftp/pub/xulrunner/nightly";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/xulrunner/nightly";
+$tbox_ftp_path = "/home/ftp/pub/xulrunner/tinderbox-builds";
+$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/xulrunner/tinderbox-builds";
+# CONFIG: $milestone     = 'xulrunner%version%';
+$milestone     = 'xulrunner1.9.0.17';
+$notify_list   = "build-announce\@mozilla.org";
+$stub_installer = 0;
+$sea_installer = 0;
+$archive       = 1;
+$push_raw_xpis = 0;
+$crashreporter_buildsymbols = 0;
+$crashreporter_pushsymbols = 0;
+# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
+$ENV{'SYMBOL_SERVER_HOST'}    = 'stage-old.mozilla.org';
+# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
+$ENV{'SYMBOL_SERVER_USER'}    = 'xrbld';
+# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
+$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_xr';
+# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
+$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/Users/cltbld/.ssh/xrbld_dsa';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = '';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = '';
+
+# Prevent Extension Manager from spawning child processes during tests
+# - processes that tbox scripts cannot kill. 
+#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/xulrunner/win32/CLOBBER

@@ -0,0 +1 @@
+Preemptive clobber for /README.txt merge conflict.

mozilla/tools/tinderbox-configs/xulrunner/win32/mozconfig

@@ -0,0 +1,18 @@
+#
+# hostname: fxexp-win32-tbox
+# uname: CYGWIN_NT-5.2 fxexp-win32-tbox 1.5.19(0.150/4/2) 2006-01-20 13:28 i686 Cygwin
+#
+
+export MOZILLA_OFFICIAL
+export JAVA_HOME=/d/jdk1.5.0_10
+
+mk_add_options MOZILLA_OFFICIAL=1
+mk_add_options MOZ_CO_PROJECT=xulrunner
+mk_add_options MOZ_MAKE_FLAGS="-j2"
+
+ac_add_options --enable-application=xulrunner
+ac_add_options --enable-jemalloc
+ac_add_options --disable-tests
+ac_add_options --enable-svg
+ac_add_options --enable-canvas
+ac_add_options --disable-installer

mozilla/tools/tinderbox-configs/xulrunner/win32/tinder-config.pl

@@ -0,0 +1,255 @@
+#
+# hostname: fxexp-win32-tbox
+# uname: CYGWIN_NT-5.2 fxexp-win32-tbox 1.5.19(0.150/4/2) 2006-01-20 13:28 i686 Cygwin
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$ENV{NO_EM_RESTART} = "1";
+$ENV{MOZ_INSTALLER_USE_7ZIP} = "1";
+$ENV{CVS_RSH} = "ssh";
+$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
+# Both these two variables are for source server support
+$ENV{PDBSTR_PATH} = 'C:\\Program Files\\Debugging Tools for Windows\\sdk\\srcsrv\\pdbstr.exe';
+$ENV{SRCSRV_ROOT} = ':pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot';
+
+# $ENV{MOZ_PACKAGE_MSI}
+#-----------------------------------------------------------------------------
+#  Default: 0
+#   Values: 0 | 1
+#  Purpose: Controls whether a MSI package is made.
+# Requires: Windows and a local MakeMSI installation.
+#$ENV{MOZ_PACKAGE_MSI} = 0;
+
+# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
+#-----------------------------------------------------------------------------
+#  Default: scp
+#   Values: scp | rsync
+#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
+# Requires: The selected type requires the command be available both locally
+#           and on the Talkback server.
+#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+$BuildAdministrator = 'build@mozilla.org';
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+#$BuildDepend       = 1;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+#$BuildLocales      = 0;      # Do l10n packaging?
+$BuildSDK           = 1;      # Build the SDK
+
+# Tests
+#$CleanProfile             = 0;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = "XULRunner";
+$VendorName               = 'Mozilla';
+
+$RunMozillaTests          = 0;  # Allow turning off of all tests if needed.
+#$RegxpcomTest             = 1;
+#$AliveTest                = 1;
+#$JavaTest                 = 0;
+#$ViewerTest               = 0;
+#$BloatTest                = 0;  # warren memory bloat test
+#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+#$DomToTextConversionTest  = 0;  
+#$XpcomGlueTest            = 0;
+#$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+#$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+#$MailBloatTest            = 0;
+#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+#$LayoutPerformanceTest    = 0;  # Tp
+#$DHTMLPerformanceTest     = 0;  # Tdhtml
+#$QATest                   = 0;  
+#$XULWindowOpenTest        = 0;  # Txul
+#$StartupPerformanceTest   = 0;  # Ts
+
+#$TestsPhoneHome           = 0;  # Should test report back to server?
+
+# $results_server
+#----------------------------------------------------------------------------
+# Server on which test results will be accessible.  This was originally tegu,
+# then became axolotl.  Once we moved services from axolotl, it was time
+# to give this service its own hostname to make future transitions easier.
+# - cmp@mozilla.org
+#$results_server           = "build-graphs.mozilla.org";
+
+#$pageload_server          = "spider";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 120;
+
+#$AliveTestTimeout                 = 45;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
+#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 15;    # seconds
+#$XULWindowOpenTestTimeout	      = 150;   # seconds
+
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+$Make          = 'make';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+$blat           = '/d/mozilla-build/blat261/full/blat';
+$use_blat       = 1;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+#$moz_cvsroot   = $ENV{CVSROOT};
+# CONFIG: $moz_cvsroot = '%mozillaCvsroot%';
+$moz_cvsroot = 'cltbld@cvs.mozilla.org:/cvsroot';
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+$ObjDir = 'obj-xulrunner';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'Release';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+# CONFIG: $BuildTree  = '%buildTree%';
+$BuildTree  = 'MozillaRelease';
+
+#$BuildName = '';
+# CONFIG: $BuildTag = '%productTag%_RELEASE';
+$BuildTag = 'FIREFOX_3_0_17_RELEASE';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'xulrunner.exe';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# Release build options
+$ReleaseBuild  = 1;
+$shiptalkback  = 0;
+$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
+$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
+#$build_hour    = "8";
+$package_creation_path = "/xulrunner/installer";
+# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
+$ssh_version   = "2";
+# CONFIG: $ssh_user      = "%sshUser%";
+$ssh_user      = "cltbld";
+#$ssh_key       = "'$ENV{HOME}/.ssh/xrbld_dsa'";
+# CONFIG: $ssh_server    = "%sshServer%";
+$ssh_server    = "stage-old.mozilla.org";
+$ReleaseGroup  = "xulrunner";
+$ftp_path      = "/home/ftp/pub/xulrunner/nightly";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/xulrunner/nightly";
+$tbox_ftp_path = "/home/ftp/pub/xulrunner/tinderbox-builds";
+$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/xulrunner/tinderbox-builds";
+# CONFIG: $milestone     = 'xulrunner%version%';
+$milestone     = 'xulrunner1.9.0.17';
+$notify_list   = 'build-announce@mozilla.org';
+$stub_installer = 0;
+$sea_installer = 0;
+$archive       = 1;
+$push_raw_xpis = 0;
+$crashreporter_buildsymbols = 1;
+$crashreporter_pushsymbols = 1;
+# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
+$ENV{'SYMBOL_SERVER_HOST'}    = 'stage-old.mozilla.org';
+# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
+$ENV{'SYMBOL_SERVER_USER'}    = 'xrbld';
+# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
+$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_xr';
+# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
+$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/c/Documents and Settings/cltbld/.ssh/xrbld_dsa';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = '';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = '';
+
+# Prevent Extension Manager from spawning child processes during tests
+# - processes that tbox scripts cannot kill. 
+#$ENV{NO_EM_RESTART} = '1';