initial mmx

git-svn-id: svn://10.0.0.236/branches/jpeg_linux_mmx@49814 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/extensions/psm-glue/Makefile.in

@@ -1,32 +0,0 @@
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-# 
-
-DEPTH		= ../..
-topsrcdir	= @top_srcdir@
-srcdir		= @srcdir@
-VPATH		= @srcdir@
-
-include $(DEPTH)/config/autoconf.mk
-
-DIRS		= public src res
-
-include $(topsrcdir)/config/rules.mk
-

mozilla/extensions/psm-glue/makefile.win

@@ -1,27 +0,0 @@
-#!nmake
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-
-DEPTH=..\..
-include <$(DEPTH)/config/config.mak>
-
-DIRS = public src res
-
-include <$(DEPTH)\config\rules.mak>

mozilla/extensions/psm-glue/public/MANIFEST

@@ -1,4 +0,0 @@
-nsIPSMComponent.idl
-nsIPSMUIHandler.idl
-nsISecureBrowserUI.idl
-nsISSLSocketProvider.idl

mozilla/extensions/psm-glue/public/Makefile.in

@@ -1,45 +0,0 @@
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#   Hubbie Shaw
-#   Doug Turner <dougt@netscape.com>
-#   Terry Hayes <thayes@netscape.com>
-# 
-
-MODULE = psmglue
-
-DEPTH		= ../../..
-topsrcdir	= @top_srcdir@
-srcdir		= @srcdir@
-VPATH		= @srcdir@
-
-include $(DEPTH)/config/autoconf.mk
-
-XPIDLSRCS = \
-	nsIPSMComponent.idl \
-	nsIPSMUIHandler.idl \
-	nsISecureBrowserUI.idl \
-    nsIPSMSocketInfo.idl \
-	nsISSLSocketProvider.idl \
-	nsISecretDecoderRing.idl \
-	$(NULL)
-
-PREF_JS_EXPORTS	= $(srcdir)/psm-glue.js
-
-include $(topsrcdir)/config/rules.mk

mozilla/extensions/psm-glue/public/makefile.win

@@ -1,53 +0,0 @@
-#!nmake
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is mozilla.org code.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):
-#   Hubbie Shaw
-#   Doug Turner <dougt@netscape.com>
-#   Terry Hayes <thayes@netscape.com>
-#
-
-MODULE = psmglue
-
-DEPTH=..\..\..
-IGNORE_MANIFEST=1
-
-DLLNAME       = psmglue
-PDBFILE       = $(DLLNAME).pdb
-MAPFILE       = $(DLLNAME).map
-DLL           = .\$(OBJDIR)\$(DLLNAME).dll
-MAKE_OBJ_TYPE = DLL
-
-include <$(DEPTH)/config/config.mak>
-
-XPIDL_INCLUDES=-I$(DEPTH)\..\mozilla\dist\idl
-
-XPIDLSRCS= \
-    .\nsIPSMComponent.idl \
-    .\nsIPSMUIHandler.idl \
-    .\nsISecureBrowserUI.idl \
-    .\nsISSLSocketProvider.idl \
-    .\nsIPSMSocketInfo.idl \
-    .\nsISecretDecoderRing.idl \
-    $(NULL)
-
-include <$(DEPTH)\config\rules.mak>
-
-install::
-    $(MAKE_INSTALL) .\psm-glue.js $(DIST)\bin\defaults\pref

mozilla/extensions/psm-glue/public/nsIPSMComponent.idl

@@ -1,58 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
- *   Mitch Stoltz <mstoltz@netscape.com>
-*/
-
-#include "nsISupports.idl"
-interface nsIPrincipal;
-
-%{C++
-#include "cmtcmn.h"
-%}
-
-[ptr] native nsCMTControlStar(CMT_CONTROL);
-
-[scriptable, uuid(9e482670-5412-11d3-bbc8-0000861d1237)]
-interface nsIPSMComponent : nsISupports 
-{
-
-  [noscript] nsCMTControlStar getControlConnection( );
-
-  /**
-   *  Display the Security Advisor.  PickledStatus and hostName can be null. 
-   *  If they are, the "Selected Info" dialog will be empty.
-   */
-
-  void displaySecurityAdvisor(in string pickledStatus, in string hostName);
-
-  /**
-   *  This will send PSM all preferences that we know about.
-   */
-  void passPrefs();
-};
-
-%{C++
-#define PSM_COMPONENT_PROGID "component://netscape/psm"
-#define PSM_COMPONENT_CLASSNAME "Mozilla PSM Component"
-%}
-

mozilla/extensions/psm-glue/public/nsIPSMSocketInfo.idl

@@ -1,50 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Doug Turner <dougt@netscape.com>
-*/
-
-#include "nsISupports.idl"
-
-%{C++
-#include "cmtcmn.h"
-#include "nsPSMShimLayer.h"
-%}
-
-[ptr] native psmtControlStar(CMT_CONTROL);
-[ptr] native cmSocketStar(CMSocket);
-[ptr] native nsFileDescStar(PRFileDesc);
-
-[noscript, uuid(deeb8dfc-fb7a-11d3-ac84-00c04fa0d26b)]
-interface nsIPSMSocketInfo : nsISupports {
-    
-    readonly attribute string           hostName;
-    readonly attribute PRInt32          hostPort;
-    
-    readonly attribute string           proxyName;
-    readonly attribute PRInt32          proxyPort;
-
-    readonly attribute psmtControlStar  controlPtr;
-    readonly attribute cmSocketStar     socketPtr;
-    readonly attribute nsFileDescStar   fileDescPtr;
-    
-    void getPickledStatus(out charPtr pickledStatus);
-};
-

mozilla/extensions/psm-glue/public/nsIPSMUIHandler.idl

@@ -1,36 +0,0 @@
-/* -*- Mode: IDL; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- * 
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- * 
- * The Original Code is the Mozilla browser.
- * 
- * The Initial Developer of the Original Code is Netscape
- * Communications, Inc.  Portions created by Netscape are
- * Copyright (C) 1999, Mozilla.  All Rights Reserved.
- * 
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
- */
-
-#include "nsISupports.idl"
-
-[scriptable, uuid(d92be9b0-601b-11d3-8c4a-000064657374)]
-interface nsIPSMUIHandler : nsISupports
-{
-    void DisplayURI(in long width, in long height, in PRBool modal, in string urlStr);
-    void PromptForFile(in wstring prompt, in string fileRegEx, in boolean shouldFileExist, out string outFile);
-};
-
-%{C++
-#define PSM_UI_HANLDER_PROGID "component://netscape/psm/ui"
-#define PSM_UI_HANLDER_CLASSNAME "Mozilla PSM UI Handler"
-%}

mozilla/extensions/psm-glue/public/nsISSLSocketProvider.idl

@@ -1,35 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
-*/
-
-#include "nsISocketProvider.idl"
-
-[noscript, uuid(856a93d0-5415-11d3-bbc8-0000861d1237)]
-interface nsISSLSocketProvider : nsISocketProvider {
-};
-
-%{C++
-#define NS_ISSLSOCKETPROVIDER_PROGID     NS_NETWORK_SOCKET_PROGID_PREFIX "ssl"
-#define NS_ISSLSOCKETPROVIDER_CLASSNAME  "Mozilla SSL Socket Provider Component"
-
-%}

mozilla/extensions/psm-glue/public/nsISecretDecoderRing.idl

@@ -1,63 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Netscape Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/NPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *  thayes@netscape.com
- *
- */
-
-#include "nsISupports.idl"
-
-/* Buffer type - for storing 8-bit octet values */
-[ptr] native buffer(unsigned char);
-
-[scriptable, uuid(0EC80360-075C-11d4-9FD4-00C04F1B83D8)]
-interface nsISecretDecoderRing: nsISupports {
-
-  /* Encrypt a buffer - callable only from C++ */
-  [noscript] long encrypt(in buffer data, in long dataLen, out buffer result);
-
-  /* Decrypt a buffer - callable only from C++ */
-  [noscript] long decrypt(in buffer data, in long dataLen, out buffer result);
-
-  /* Encrypt nul-terminated string to BASE64 output */
-  string encryptString(in string text);
-
-  /* Decrypt BASE64 input to nul-terminated string output */
-  /* There is no check for embedded nul values in the decrypted output */
-  string decryptString(in string crypt);
-
-  /* Prompt the user to change the password on the SDR key */
-  void changePassword();
-
-  /* Logout of the security device that protects the SDR key */
-  void logout();
-};
-
-/*
- * Configuration interface for the Secret Decoder Ring
- *  - this interface allows setting the window that will be
- *    used as parent for dialog windows (such as password prompts)
- */
-[scriptable, uuid(01D8C0F0-0CCC-11d4-9FDD-000064657374)]
-interface nsISecretDecoderRingConfig: nsISupports {
-  void setWindow(in nsISupports w);
-};
-
-

mozilla/extensions/psm-glue/public/nsISecureBrowserUI.idl

@@ -1,44 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
-*/
-
-#include "nsISupports.idl"
-
-interface nsIDOMWindow;
-interface nsIDOMElement;
-
-[scriptable, uuid(081e31e0-a144-11d3-8c7c-00609792278c)]
-interface nsSecureBrowserUI : nsISupports
-{
-	void init(in nsIDOMWindow window, in nsIDOMElement button);
-    void displayPageInfoUI();
-};
-
-%{C++
-#define NS_SECURE_BROWSER_UI_PROGID "component://netscape/secure_browser_ui"
-#define NS_SECURE_BROWSER_UI_CLASSNAME "Mozilla Secure Browser UI Handler"
-
-#define NS_SECURE_BROWSER_UI_CID \
-{ 0x10fe7ea0, 0xa10a, 0x11d3, {0x8c, 0x7c, 0x00, 0x60, 0x97, 0x92, 0x27, 0x8c}}
-
-%}

mozilla/extensions/psm-glue/public/psm-glue.js

@@ -1,11 +0,0 @@
-pref("general.useragent.security",       "U");
-
-pref("security.enable_ssl2",             true);
-pref("security.enable_ssl3",             true);
-pref("security.default_personal_cert",   "Select Automatically");
-pref("security.ask_for_password",        0);
-pref("security.password_lifetime",       30);
-pref("security.warn_entering_secure",    true);
-pref("security.warn_leaving_secure",     true);
-pref("security.warn_viewing_mixed",      true);
-pref("security.warn_submit_insecure",    true);

mozilla/extensions/psm-glue/res/Makefile.in

@@ -1,32 +0,0 @@
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-# 
-
-DEPTH		= ../../..
-topsrcdir	= @top_srcdir@
-srcdir		= @srcdir@
-VPATH		= @srcdir@
-
-include $(DEPTH)/config/autoconf.mk
-
-DIRS		= content locale
-
-include $(topsrcdir)/config/rules.mk
-

mozilla/extensions/psm-glue/res/content/MANIFEST

@@ -1,3 +0,0 @@
-securityOverlay.xul
-securityUI.js
-PSMTaskMenu.xul

mozilla/extensions/psm-glue/res/content/Makefile.in

@@ -1,38 +0,0 @@
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-# 
-
-DEPTH		= ../../../..
-topsrcdir	= @top_srcdir@
-srcdir		= @srcdir@
-VPATH		= @srcdir@
-
-include $(DEPTH)/config/autoconf.mk
-include $(topsrcdir)/config/rules.mk
-
-COMMUNICATOR_CONTENT_DIR = $(DIST)/bin/chrome/packages/core/communicator/content/
-COMMUNICATOR_EXPORT_CONTENT = \
-  $(srcdir)/securityOverlay.xul \
-  $(srcdir)/securityUI.js       \
-  $(srcdir)/PSMTaskMenu.xul \
-  $(NULL)
-
-install::
-	$(INSTALL) $(COMMUNICATOR_EXPORT_CONTENT) $(COMMUNICATOR_CONTENT_DIR)

mozilla/extensions/psm-glue/res/content/PSMTaskMenu.xul

@@ -1,22 +0,0 @@
-<?xml version="1.0"?>
-
-<!DOCTYPE window SYSTEM "chrome://communicator/locale/PSMTaskMenu.dtd" >
-
-<overlay id="psmTaskMenuID"
-         xmlns:html="http://www.w3.org/1999/xhtml"
-         xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul">
-
-  <script language="JavaScript">
-    function displaySecurityAdvisor()
-    {
-      var psm = Components.classes["component://netscape/psm"].getService();
-      psm = psm.QueryInterface(Components.interfaces.nsIPSMComponent);
-      psm.displaySecurityAdvisor( null, null );
-    }
-  </script>
-
-  <menupopup id="personalManagers">
-    <menuitem id="PSMMentItem" position="1" value="&PSMCmd.label;" oncommand="displaySecurityAdvisor()"/>
-  </menupopup>
-
-</overlay>

mozilla/extensions/psm-glue/res/content/makefile.win

@@ -1,35 +0,0 @@
-#!nmake
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-
-DEPTH=..\..\..\..
-include <$(DEPTH)/config/config.mak>
-include <$(DEPTH)\config\rules.mak>
-
-install:: $(DLL)
-    $(MAKE_INSTALL) securityOverlay.xul     $(DIST)\bin\chrome\packages\core\communicator\content
-    $(MAKE_INSTALL) securityUI.js           $(DIST)\bin\chrome\packages\core\communicator\content
-    $(MAKE_INSTALL) PSMTaskMenu.xul	$(DIST)\bin\chrome\packages\core\communicator\content
-    
-clobber::
-    $(RM) $(DIST)\bin\chrome\packages\core\communicator\content\securityOverlay.xul
-    $(RM) $(DIST)\bin\chrome\packages\core\communicator\content\securityUI.js
-    $(RM) $(DIST)\bin\chrome\packages\core\communicator\content\PSMTaskMenu.xul
-

mozilla/extensions/psm-glue/res/content/securityOverlay.xul

@@ -1,14 +0,0 @@
-<?xml version="1.0"?>
-<?xml-stylesheet href="chrome://communicator/skin/securityOverlay.css" type="text/css"?> 
-
-<!DOCTYPE window SYSTEM "chrome://communicator/locale/securityOverlay.dtd">
-
-<overlay id="NavSecurityOverlay"
-         xmlns:html="http://www.w3.org/TR/REC-html40"
-         xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul">
-
-  <script language="JavaScript" src="chrome://communicator/content/securityUI.js" />
-
-  <statusbarpanel id="security-button" onclick="displayPageInfo()" tooltip="aToolTip" tooltiptext="&lockIcon.label;"/>    
-      
-</overlay>

mozilla/extensions/psm-glue/res/content/securityUI.js

@@ -1,45 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
-*/
-
-window.addEventListener("load", SetSecurityButton, false);
-
-var securityUI;
-
-function SetSecurityButton()
-{
-    dump("in SetSecurityButton\n");
-
-    var ui = Components.classes["component://netscape/secure_browser_ui"].createInstance();
-    securityUI = ui.QueryInterface(Components.interfaces.nsSecureBrowserUI);
-
-    var button  = document.getElementById('security-button');
-	if (button && window.content)
-		securityUI.init(window.content, button);
-}
-
-function displayPageInfo()
-{
-   if (securityUI)
-     securityUI.displayPageInfoUI();
-}
-
-

mozilla/extensions/psm-glue/res/locale/Makefile.in

@@ -1,32 +0,0 @@
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#
-
-DEPTH		= ../../../..
-topsrcdir	= @top_srcdir@
-srcdir		= @srcdir@
-VPATH		= @srcdir@
-
-include $(DEPTH)/config/autoconf.mk
-
-DIRS		= en-US
-
-include $(topsrcdir)/config/rules.mk
-

mozilla/extensions/psm-glue/res/locale/en-US/MANIFEST

@@ -1,3 +0,0 @@
-PSMTaskMenu.dtd
-securityOverlay.dtd
-security.properties

mozilla/extensions/psm-glue/res/locale/en-US/Makefile.in

@@ -1,41 +0,0 @@
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#
-
-DEPTH		= ../../../../..
-topsrcdir	= @top_srcdir@
-srcdir		= @srcdir@
-VPATH		= @srcdir@
-
-include $(DEPTH)/config/autoconf.mk
-
-COMMUNICATOR_RESOURCE_CONTENT = \
-	$(srcdir)/PSMTaskMenu.dtd \
-	$(srcdir)/security.properties \
-	$(srcdir)/securityOverlay.dtd \
-	$(NULL)
-
-include $(topsrcdir)/config/rules.mk
-
-install:: 
-	$(INSTALL) $(COMMUNICATOR_RESOURCE_CONTENT) $(DIST)/bin/chrome/locales/en-US/communicator/locale
-
-
-

mozilla/extensions/psm-glue/res/locale/en-US/PSMTaskMenu.dtd

@@ -1 +0,0 @@
-<!ENTITY PSMCmd.label     "Security Manager">

mozilla/extensions/psm-glue/res/locale/en-US/makefile.win

@@ -1,37 +0,0 @@
-#!nmake
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-
-DEPTH=..\..\..\..\..
-
-include <$(DEPTH)\config\rules.mak>
-
-COMMUNICATOR_DIST=$(DIST)\bin\chrome\locales\en-US\communicator\locale
-
-
-install::
-	$(MAKE_INSTALL) PSMTaskMenu.dtd $(COMMUNICATOR_DIST)
-	$(MAKE_INSTALL) security.properties $(COMMUNICATOR_DIST)
-	$(MAKE_INSTALL) securityOverlay.dtd $(COMMUNICATOR_DIST)
-
-clobber::
-  $(RM) -f $(DIST)\bin\chrome\locales\en-US\communicator\locale\PSMTaskMenu.dtd
-  $(RM) -f $(DIST)\bin\chrome\locales\en-US\communicator\locale\security.properties
-  $(RM) -f $(DIST)\bin\chrome\locales\en-US\communicator\locale\securityOverlay.dtd

mozilla/extensions/psm-glue/res/locale/en-US/security.properties

@@ -1,29 +0,0 @@
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-# 
-
-Title=Security Warning
-MixedContentMessage=You have requested a secure document that contains some insecure information.
-LeaveSiteMessage=You have requested an insecure document. The document and any information you send back could be observed by a third party while in transit.
-EnterSiteMessage=You have requested a secure document. The document and any information you send back are encrypted for privacy while in transit.
-PostToInsecure=Warning! Although this document is secure, the information you have submitted is insecure and could be observed by a third party while in transit. If you are submitting passwords, credit card numbers, or other information you would like to keep private, it would be safer for you to cancel the submission.
-PostToInsecureFromInsecure=Any information you submit is insecure and could be observed by a third party while in transit. If you are submitting passwords, credit card numbers, or other information you would like to keep private, it would be safer for you to cancel the submission. 
-DontShowAgain=Show Me This Alert Next Time.
-FindText=Please find the Personal Security Manager application

mozilla/extensions/psm-glue/res/locale/en-US/securityOverlay.dtd

@@ -1,2 +0,0 @@
-
-<!ENTITY  lockIcon.label  "Show security information for this window">

mozilla/extensions/psm-glue/res/locale/makefile.win

@@ -1,27 +0,0 @@
-#!nmake
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-
-DEPTH=..\..\..\..
-
-DIRS=en-US
-
-include <$(DEPTH)\config\rules.mak>
-

mozilla/extensions/psm-glue/res/makefile.win

@@ -1,27 +0,0 @@
-#!nmake
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-
-DEPTH=..\..\..
-include <$(DEPTH)/config/config.mak>
-
-DIRS = content locale
-
-include <$(DEPTH)\config\rules.mak>

mozilla/extensions/psm-glue/src/Makefile.in

@@ -1,66 +0,0 @@
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#   Hubbie Shaw
-#   Doug Turner <dougt@netscape.com>
-# 
-
-DEPTH		= ../../..
-topsrcdir	= @top_srcdir@
-srcdir		= @srcdir@
-VPATH		= @srcdir@
-
-include $(DEPTH)/config/autoconf.mk
-
-MODULE = psmglue
-
-IS_COMPONENT	= 1
-LIBRARY_NAME	= psmglue
-
-
-CPPSRCS	= \
-	nsPSMComponent.cpp \
-	nsPSMUICallbacks.cpp \
-	nsSSLSocketProvider.cpp \
-	nsPSMModule.cpp \
-	nsSSLIOLayer.cpp \
-	nsSecureBrowserUIImpl.cpp \
-	nsSDR.cpp \
-	nsFSDR.cpp \
-	nsCrypto.cpp \
-	nsKeygenHandler.cpp \
-	$(NULL)
-
-CSRCS = \
-	nsPSMMutex.c	\
-	nsPSMShimLayer.c	\
-	$(NULL)
-
-EXTRA_DSO_LDOPTS = \
-	$(MOZ_COMPONENT_LIBS) \
-	-lcmt \
-	-lprotocol \
-	$(MOZ_JS_LIBS) \
-	$(NULL)
-
-include $(topsrcdir)/config/rules.mk
-
-INCLUDES	+= \
-		-I$(srcdir) \
-		$(NULL)

mozilla/extensions/psm-glue/src/makefile.win

@@ -1,72 +0,0 @@
-#!nmake
-#
-# The contents of this file are subject to the Mozilla Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/MPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is mozilla.org code.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):
-#   Hubbie Shaw
-#   Doug Turner <dougt@netscape.com>
-#
-
-MODULE = psmglue
-
-DEPTH=..\..\..
-IGNORE_MANIFEST=1
-
-DLLNAME       = psmglue
-PDBFILE       = $(DLLNAME).pdb
-MAPFILE       = $(DLLNAME).map
-DLL           = .\$(OBJDIR)\$(DLLNAME).dll
-MAKE_OBJ_TYPE = DLL
-
-include <$(DEPTH)/config/config.mak>
-
-LINCS = $(LINCS)     \
-    -I$(PUBLIC)      \
-    -I$(PUBLIC)/security \
-    $(NULL)
-
-LLIBS   = \
-    $(LIBNSPR) \
-    $(DIST)\lib\neckobase_s.lib \
-    $(DIST)\lib\xpcom.lib \
-    $(DIST)\lib\js3250.lib \
-    $(DIST)\lib\cmt.lib       \
-    $(DIST)\lib\protocol.lib  \
-    $(DIST)\lib\mozreg.lib       \
-    $(DIST)\lib\jsdom.lib \
-    $(NULL)
-
-OBJS = \
-    .\$(OBJDIR)\nsPSMMutex.obj \
-    .\$(OBJDIR)\nsPSMShimLayer.obj \
-    .\$(OBJDIR)\nsPSMComponent.obj \
-    .\$(OBJDIR)\nsPSMUICallbacks.obj \
-    .\$(OBJDIR)\nsPSMModule.obj \
-    .\$(OBJDIR)\nsSecureBrowserUIImpl.obj \
-    .\$(OBJDIR)\nsSSLIOLayer.obj \
-    .\$(OBJDIR)\nsSSLSocketProvider.obj \
-    .\$(OBJDIR)\nsSDR.obj \
-    .\$(OBJDIR)\nsFSDR.obj \
-    .\$(OBJDIR)\nsCrypto.obj \
-    .\$(OBJDIR)\nsKeygenHandler.obj \
-    $(NULL)
-
-include <$(DEPTH)\config\rules.mak>
-
-install:: $(DLL)
-    $(MAKE_INSTALL) .\$(OBJDIR)\$(DLLNAME).dll $(DIST)\bin\components

mozilla/extensions/psm-glue/src/nsCrypto.h

@@ -1,112 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Netscape Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/NPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- */
-#ifndef _nsCrypto_h_
-#define _nsCrypto_h_
-#include "nsIDOMCRMFObject.h"
-#include "nsIDOMCrypto.h"
-#include "nsIScriptObjectOwner.h"
-#include "nsIDOMPkcs11.h"
-
-#define NS_CRYPTO_CLASSNAME "Crypto JavaScript Class"
-#define NS_CRYPTO_CID \
-  {0x929d9320, 0x251e, 0x11d4, { 0x8a, 0x7c, 0x00, 0x60, 0x08, 0xc8, 0x44, 0xc3} }
-
-#define NS_PKCS11_CLASSNAME "Pkcs11 JavaScript Class"
-#define NS_PKCS11_CID \
-  {0x74b7a390, 0x3b41, 0x11d4, { 0x8a, 0x80, 0x00, 0x60, 0x08, 0xc8, 0x44, 0xc3} }
-
-class nsIPSMComponent;
-class nsIDOMScriptObjectFactory;
-
-
-class nsCRMFObject : public nsIDOMCRMFObject,
-                     public nsIScriptObjectOwner {
-public:
-  nsCRMFObject();
-  virtual ~nsCRMFObject();
-  NS_DECL_IDOMCRMFOBJECT
-  NS_DECL_ISUPPORTS
-
-  NS_IMETHOD GetScriptObject(nsIScriptContext *aContext, void** aScriptObject);
-  NS_IMETHOD SetScriptObject(void* aScriptObject);
-
-  nsresult init();
-
-  nsresult SetCRMFRequest(char *inRequest);
-private:
-
-  nsString mBase64Request;
-  void *mScriptObject;
-};
-
-
-class nsCrypto: public nsIDOMCrypto,
-                public nsIScriptObjectOwner {
-public:
-  nsCrypto();
-  virtual ~nsCrypto();
-  nsresult init();
-  
-  NS_IMETHOD GetScriptObject(nsIScriptContext *aContext, void** aScriptObject);
-  NS_IMETHOD SetScriptObject(void* aScriptObject);
-
-  NS_DECL_ISUPPORTS
-  NS_DECL_IDOMCRYPTO
-
-  static nsresult GetScriptObjectFactory(nsIDOMScriptObjectFactory **aResult);
-  static nsIDOMScriptObjectFactory *gScriptObjectFactory;
-  static nsIPrincipal* GetScriptPrincipal(JSContext *cx);
-  static const char *kPSMComponentProgID;
-
- private:
-
-  nsIPSMComponent *mPSM;
-  nsString         mVersionString;
-  PRBool           mVersionStringSet;
-  void            *mScriptObject;
-};
-
-class nsPkcs11 : public nsIDOMPkcs11,
-                 public nsIScriptObjectOwner {
-public:
-  nsPkcs11();
-  virtual ~nsPkcs11();
-
-  nsresult init();
-  NS_DECL_ISUPPORTS
-  NS_DECL_IDOMPKCS11
-  NS_IMETHOD GetScriptObject(nsIScriptContext *aContext, void** aScriptObject);
-  NS_IMETHOD SetScriptObject(void* aScriptObject);
-
-private:
-  nsIPSMComponent *mPSM;
-  void            *mScriptObject;
-};
-
-nsresult
-getPSMComponent(nsIPSMComponent ** retPSM);
-
-#endif //_nsCrypto_h_
-
-
-
-

mozilla/extensions/psm-glue/src/nsFSDR.h

@@ -1,60 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Terry Hayes <thayes@netscape.com>
- *   Steve Morse <morse@netscape.com>
- */
-
-#ifndef _NSFSDR_H_
-#define _NSFSDR_H_
-
-#include "nsISecretDecoderRing.h"
-
-// ===============================================
-// nsFSecretDecoderRing - "fake" implementation of nsISecretDecoderRing
-// ===============================================
-
-#define NS_FSDR_CLASSNAME "Fake Secret Decoder Ring"
-#define NS_FSDR_CID \
-  { 0x1ee28720, 0x2b93, 0x11d4, { 0xa0, 0xa4, 0x0, 0x0, 0x64, 0x65, 0x73, 0x74 } }
-
-#define NS_FSDR_PROGID "netscape.security.fsdr"
-
-class nsFSecretDecoderRing : public nsISecretDecoderRing
-{
-public:
-  NS_DECL_ISUPPORTS
-  NS_DECL_NSISECRETDECODERRING
-
-  nsFSecretDecoderRing();
-  virtual ~nsFSecretDecoderRing();
-
-  nsresult init();
-
-private:
-  nsIPSMComponent *mPSM;
-
-  static const char *kPSMComponentProgID;
-
-  nsresult encode(const unsigned char *data, PRInt32 dataLen, char **_retval);
-  nsresult decode(const char *data, unsigned char **result, PRInt32 * _retval);
-};
-
-#endif /* _NSFSDR_H_ */

mozilla/extensions/psm-glue/src/nsKeygenHandler.cpp

@@ -1,255 +0,0 @@
-//For some weird reason, nsProxiedService has to be the first file 
-//included.  Don't ask me, I'm just the messenger.
-#include "nsProxiedService.h"
-#include "nsKeygenHandler.h"
-#include "nsVoidArray.h"
-#include "nsSecureBrowserUIImpl.h"
-#include "nsIServiceManager.h"
-#include "nsIDOMHTMLSelectElement.h"
-#include "nsIContent.h"
-#include "nsIPSMComponent.h"
-#include "nsIPSMUIHandler.h"
-#include "nsPSMUICallbacks.h"
-#include "nsCrypto.h"
-#include "cmtcmn.h"
-#include "cmtjs.h"
-
-//These defines are taken from the PKCS#11 spec
-#define CKM_RSA_PKCS_KEY_PAIR_GEN     0x00000000
-#define CKM_DH_PKCS_KEY_PAIR_GEN      0x00000020
-#define CKM_DSA_KEY_PAIR_GEN          0x00000010
-
-static NS_DEFINE_IID(kFormProcessorIID,   NS_IFORMPROCESSOR_IID); 
-static NS_DEFINE_IID(kIDOMHTMLSelectElementIID, NS_IDOMHTMLSELECTELEMENT_IID);
-
-static const char *mozKeyGen = "-mozilla-keygen";
-
-NS_IMPL_ADDREF(nsKeygenFormProcessor); 
-NS_IMPL_RELEASE(nsKeygenFormProcessor); 
-NS_IMPL_QUERY_INTERFACE(nsKeygenFormProcessor, kFormProcessorIID); 
-
-nsKeygenFormProcessor::nsKeygenFormProcessor() 
-{ 
-   NS_INIT_REFCNT(); 
-   getPSMComponent(&mPSM);
-} 
-
-char *
-nsKeygenFormProcessor::ChooseToken(PCMT_CONTROL control, 
-				   CMKeyGenTagArg *psmarg,
-				   CMKeyGenTagReq *reason)
-{
-  CMUint32 resID;
-  CMTStatus crv;
-  CMTItem url;
-  char *keyString = nsnull;
-  nsresult rv = NS_OK;
-  NameList *tokenNames;
-  int i;
-
-  // In this case, PSM provided us with a list of potential tokens to choose
-  // from, but we're gonna make it use it's UI for now, so let's delte the
-  // memory associated with the structure it sent back.
-  tokenNames = (NameList*)psmarg->current;
-  for (i=0; i < tokenNames->numitems; i++) {
-    nsCRT::free(tokenNames->names[i]);
-  }
-  nsCRT::free((char*)tokenNames);
-  resID = psmarg->rid;
-  memset(&url, 0, sizeof(CMTItem));
-  NS_WITH_PROXIED_SERVICE(nsIPSMUIHandler, handler, nsPSMUIHandlerImpl::GetCID(), NS_UI_THREAD_EVENTQ, &rv);
-  crv = CMT_GetStringAttribute(control, resID, SSM_FID_CHOOSE_TOKEN_URL, &url);
-  if (crv != CMTSuccess) {
-    goto loser;
-  }
-  if (NS_SUCCEEDED(rv)) {
-    handler->DisplayURI(400, 300, PR_TRUE, (char*)url.data);
-  } else {
-    goto loser;
-  }
-  return CMT_GetGenKeyResponse(control, psmarg, reason);
- loser:
-  if (keyString)
-    nsCRT::free(keyString);
-  return nsnull;
-}
-
-char *
-nsKeygenFormProcessor::SetUserPassword(PCMT_CONTROL control, 
-				       CMKeyGenTagArg *psmarg,
-				       CMKeyGenTagReq *reason)
-{
-  nsresult rv;
-  CMTStatus crv;
-  CMTItem url;
-  char *keystring=nsnull;
-
-  // We need to delete the memory the PSM client API allocated for us since
-  // we're just gonna tell it to use it's own UI.
-  nsCRT::free((char*)psmarg->current);
-  NS_WITH_PROXIED_SERVICE(nsIPSMUIHandler, handler, nsPSMUIHandlerImpl::GetCID(), NS_UI_THREAD_EVENTQ, &rv);
-  memset (&url, 0, sizeof(CMTItem));
-  crv = CMT_GetStringAttribute(control,psmarg->rid, SSM_FID_INIT_DB_URL, &url);
-  if (crv != CMTSuccess || NS_FAILED(rv)){
-    goto loser;
-  }
-
-  handler->DisplayURI(500, 450, PR_TRUE, (char*)url.data);
-  
-  return CMT_GetGenKeyResponse(control, psmarg, reason);
- loser:
-  if (keystring)
-    nsCRT::free(keystring);
-  return nsnull;
-}
-
-nsresult
-nsKeygenFormProcessor::GetPublicKey(nsString& value, nsString& challenge, 
-				    nsString& keyType,
-				    nsString& outPublicKey, nsString& pqg)
-{
-    PCMT_CONTROL control;
-    nsresult rv;
-    CMKeyGenParams *params = nsnull;
-    CMKeyGenTagArg *psmarg = nsnull;
-    CMKeyGenTagReq reason;
-    char *emptyCString = "null";
-    char *keystring = nsnull;
-
-    rv = mPSM->GetControlConnection(&control);
-    if (NS_FAILED(rv)) {
-	goto loser;
-    }
-    params = new CMKeyGenParams;
-    if (params == nsnull) {
-      goto loser;
-    }
-    params->typeString = (keyType.IsEmpty()) ? emptyCString : 
-                                               keyType.ToNewCString();
-    params->challenge  = (challenge.IsEmpty()) ? emptyCString : 
-                                                 challenge.ToNewCString();
-    params->choiceString = value.ToNewCString();
-    params->pqgString = (pqg.IsEmpty()) ? emptyCString : pqg.ToNewCString();
-    psmarg = new CMKeyGenTagArg;
-    if (psmarg == nsnull) {
-      goto loser;
-    }
-    // ARGH, while this is going on, we need to lock the control
-    // connection so that the event loop doesn't drop our response on
-    // the floor.
-    CMT_LockConnection(control);
-    psmarg->op = CM_KEYGEN_START;
-    psmarg->rid = 0;
-    psmarg->tokenName = NULL;
-    psmarg->current = params;
-    keystring = CMT_GenKeyOldStyle(control, psmarg, &reason);
-    while (!keystring) {
-      psmarg->op = reason;
-      switch (psmarg->op) {
-      case CM_KEYGEN_PICK_TOKEN:
-	keystring = ChooseToken(control, psmarg, &reason);
-	break;
-      case CM_KEYGEN_SET_PASSWORD:
-	keystring = SetUserPassword(control, psmarg, &reason);
-	break;
-      case CM_KEYGEN_ERR:
-      default:
-	goto loser;
-      }
-    }
-    CMT_UnlockConnection(control);
-    outPublicKey.AssignWithConversion(keystring);
-    nsCRT::free(keystring);
-    return NS_OK;
- loser:
-    return NS_ERROR_FAILURE;
-}
-
-NS_METHOD 
-nsKeygenFormProcessor::ProcessValue(nsIDOMHTMLElement *aElement, 
-				    const nsString& aName, 
-				    nsString& aValue) 
-{ 
-#ifdef DEBUG_javi
-  char *name = aName.ToNewCString(); 
-  char *value = aValue.ToNewCString(); 
-  printf("ProcessValue: name %s value %s\n",  name, value); 
-  delete [] name; 
-  delete [] value; 
-#endif 
-  nsresult rv = NS_OK;
-  nsCOMPtr<nsIDOMHTMLSelectElement>selectElement;
-  nsresult res = aElement->QueryInterface(kIDOMHTMLSelectElementIID, 
-					  getter_AddRefs(selectElement));
-  if (NS_SUCCEEDED(res)) {
-    nsAutoString keygenvalue;
-    nsAutoString challengeValue;
-    nsString publicKey;
-    nsString mozillaKeygen;
-    nsString mozType;
-
-    mozType.AssignWithConversion("_moz-type");
-    mozillaKeygen.AssignWithConversion(mozKeyGen);
-    res = selectElement->GetAttribute(mozType, keygenvalue);
-
-    if (NS_CONTENT_ATTR_HAS_VALUE == res && keygenvalue.Equals(mozillaKeygen)) {
-      nsString challenge;
-      nsString keyType;
-      nsString keyTypeValue;
-      nsString pqg, pqgValue;
-
-      challenge.AssignWithConversion("challenge");
-      pqg.AssignWithConversion("pqg");
-      res = selectElement->GetAttribute(pqg, pqgValue);
-      keyType.AssignWithConversion("keytype");
-      res = selectElement->GetAttribute(keyType, keyTypeValue);
-      if (NS_FAILED(res) || keyTypeValue.IsEmpty()) {
-	// If this field is not present, we default to rsa.
-	keyTypeValue.AssignWithConversion("rsa");
-      }
-      res = selectElement->GetAttribute(challenge, challengeValue);
-      rv = GetPublicKey(aValue, challenge, keyTypeValue, 
-			publicKey, pqgValue);
-      aValue = publicKey;
-    }
-  }
-
-  return rv; 
-} 
-
-NS_METHOD nsKeygenFormProcessor::ProvideContent(const nsString& aFormType, 
-						nsVoidArray& aContent, 
-						nsString& aAttribute) 
-{ 
-  nsString selectString;
-  nsresult rv;
-  PCMT_CONTROL control;
-  PRUint32 i;
-
-  selectString.AssignWithConversion("SELECT");
-  if (aFormType.EqualsIgnoreCase(selectString)) {
-    nsString *selectString;
-    char **result;
-
-    rv = mPSM->GetControlConnection(&control);
-    if (NS_FAILED(rv)) {
-	goto loser;
-    }
-    result = CMT_GetKeyChoiceList(control, "rsa"/*Need to figure out if DSA*/,
-				  nsnull);
-    for (i=0; result[i] != nsnull; i++) {
-	selectString = new nsString;
-	selectString->AssignWithConversion(result[i]);
-	aContent.AppendElement(selectString);
-	delete []result[i];
-    }
-    delete []result;
-    aAttribute.AssignWithConversion(mozKeyGen);
-  }
-  return NS_OK;
- loser:
-  return NS_ERROR_FAILURE; 
-} 
-
-
-

mozilla/extensions/psm-glue/src/nsKeygenHandler.h

@@ -1,32 +0,0 @@
-#ifndef _NSKEYGENHANDLER_H_
-#define _NSKEYGENHANDLER_H_
-// Form Processor 
-#include "nsIFormProcessor.h" 
-#include "ssmdefs.h"
-#include "cmtcmn.h"
-
-class nsIPSMComponent;
-
-class nsKeygenFormProcessor : public nsIFormProcessor { 
-public: 
-  nsKeygenFormProcessor(); 
-  NS_IMETHOD ProcessValue(nsIDOMHTMLElement *aElement, 
-                          const nsString& aName, 
-                          nsString& aValue); 
-
-  NS_IMETHOD ProvideContent(const nsString& aFormType, 
-                            nsVoidArray& aContent, 
-                            nsString& aAttribute); 
-  NS_DECL_ISUPPORTS 
-protected:
-  nsresult GetPublicKey(nsString& value, nsString& challenge, 
-			nsString& keyType, nsString& outPublicKey,
-			nsString& pqg);
-  char * ChooseToken(PCMT_CONTROL control, CMKeyGenTagArg *psmarg,  
-		     CMKeyGenTagReq *reason);
-  char * SetUserPassword(PCMT_CONTROL control, CMKeyGenTagArg *psmarg,  
-		     CMKeyGenTagReq *reason);
-  nsIPSMComponent *mPSM;
-}; 
-
-#endif //_NSKEYGENHANDLER_H_

mozilla/extensions/psm-glue/src/nsPSMComponent.cpp

@@ -1,935 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
- *   Mitch Stoltz <mstoltz@netscape.com>
-*/
-
-#include "nsProxiedService.h"
-#include "nsPSMUICallbacks.h"
-#include "VerReg.h"
-
-#include "nspr.h"
-#include "nsPSMComponent.h"
-
-#include "nsCRT.h"
-
-#include "nsNetUtil.h"
-#include "nsIURI.h"
-#include "nsIChannel.h"
-#include "nsIInputStream.h"
-#include "nsIStreamListener.h"
-
-#include "nsIPref.h"
-#include "nsIProfile.h"
-#include "nsILocalFile.h"
-
-#include "nsDirectoryService.h"
-
-#include "rsrcids.h"
-
-#include "nsPSMMutex.h"
-#include "nsPSMShimLayer.h"
-#include "nsPSMUICallbacks.h"
-
-#include "nsISecureBrowserUI.h"
-#include "nsIDocumentLoaderObserver.h"
-#include "nsIScriptSecurityManager.h"
-#include "nsICertificatePrincipal.h"
-
-#include "nsIProtocolProxyService.h"
-
-#define PSM_VERSION_REG_KEY "/Netscape/Personal Security Manager"
-
-#ifdef WIN32
-#define PSM_FILE_NAME "psm.exe"
-#elif XP_UNIX
-#define PSM_FILE_NAME "start-psm"
-#else
-#define PSM_FILE_NAME "psm"
-#endif
-
-
-static NS_DEFINE_CID(kCStringBundleServiceCID,  NS_STRINGBUNDLESERVICE_CID);
-static NS_DEFINE_CID(kProfileCID, NS_PROFILE_CID);
-static NS_DEFINE_CID(kPrefCID, NS_PREF_CID);
-static NS_DEFINE_CID(kProtocolProxyServiceCID, NS_PROTOCOLPROXYSERVICE_CID);
-
-nsPSMComponent* nsPSMComponent::mInstance = nsnull;
-
-nsPSMComponent::nsPSMComponent()
-{
-    NS_INIT_REFCNT();
-    mControl = nsnull;
-}
-
-nsPSMComponent::~nsPSMComponent()
-{
-    if (mControl)
-    {
-        CMT_CloseControlConnection(mControl);
-        mControl = nsnull;
-    }
-}
-
-
-NS_IMETHODIMP      
-nsPSMComponent::CreatePSMComponent(nsISupports* aOuter, REFNSIID aIID, void **aResult)
-{                                                                  
-    if (!aResult) {                                                
-        return NS_ERROR_INVALID_POINTER;                           
-    }                                                              
-    if (aOuter) {                                                  
-        *aResult = nsnull;                                         
-        return NS_ERROR_NO_AGGREGATION;                              
-    }                                                                
-    
-    if (mInstance == nsnull) 
-    {
-        mInstance = new nsPSMComponent();
-    }
-
-    if (mInstance == nsnull)
-        return NS_ERROR_OUT_OF_MEMORY;
-    
-    nsresult rv = mInstance->QueryInterface(aIID, aResult);                        
-    if (NS_FAILED(rv)) 
-    {                                             
-        *aResult = nsnull;                                           
-    }                                                                
-    return rv;                                                       
-}
-
-/* nsISupports Implementation for the class */
-NS_IMPL_THREADSAFE_ISUPPORTS3(nsPSMComponent, 
-                              nsIPSMComponent, 
-                              nsIContentHandler,
-                              nsISignatureVerifier);
-
-#define INIT_NUM_PREFS 100
-/* preference types */
-#define STRING_PREF 0
-#define BOOL_PREF 1
-#define INT_PREF 2
-
-
-/* resizable list struct that contains pref items */
-typedef struct CMSetPrefList {
-    int n; /* number of filled items */
-    int capacity; /* allocated memory */
-    CMTSetPrefElement* list; /* actual list */
-} CMSetPrefList;
-
-static void get_pack_bool_pref(nsIPref *prefManager, char* key, CMTSetPrefElement* list, int* n)
-{
-    PRBool boolpref;
-
-    list[*n].key = nsCRT::strdup(key);
-    list[*n].type = BOOL_PREF;
-
-    if ((prefManager->GetBoolPref(key, &boolpref) != 0) || boolpref) 
-    {
-        list[*n].value = nsCRT::strdup("true");
-    }
-    else 
-    {
-        list[*n].value = nsCRT::strdup("false");
-    }
-
-    (*n)++;    /* increment the counter after done packing */
-
-    return;
-}
-
-static void SaveAllPrefs(int number, CMTSetPrefElement* list)
-{
-    nsCOMPtr<nsIPref> prefManager;
-
-    nsresult res = nsServiceManager::GetService(kPrefCID, 
-                                                nsIPref::GetIID(), 
-                                                getter_AddRefs(prefManager));
-    
-    if (NS_FAILED(res)  || !prefManager)
-    {
-        return;
-    }
-
-
-    int i;
-    int intval;
-
-    for (i = 0; i < number; i++) 
-    {
-        if (list[i].key == nsnull) 
-        {
-            /* misconfigured item: next */
-            continue;
-        }
-
-        switch (list[i].type) 
-        {
-             case 0:    /* string type */
-                 prefManager->SetCharPref(list[i].key, list[i].value);
-                 break;
-             case 1:    /* boolean type */
-                 if (strcmp(list[i].value, "true") == 0) {
-                  prefManager->SetBoolPref(list[i].key, (PRBool)1);
-                 }
-                 else if (strcmp(list[i].value, "false") == 0) {
-                  prefManager->SetBoolPref(list[i].key, (PRBool)0);
-                 }
-                 break;
-             case 2:
-                 intval = atoi(list[i].value);
-                 prefManager->SetIntPref(list[i].key, intval);
-                 break;
-             default:
-                 break;
-         }
-    }
-
-    return;
-}
-
-NS_IMETHODIMP
-nsPSMComponent::PassPrefs()
-{
-    // if we have not passed anything to psm yet, this function can just return.
-
-    if (!mControl)
-        return NS_OK;
-
-    int i;
-    nsresult rv = NS_ERROR_FAILURE;
-    char* strpref = NULL;
-    int intpref;
-    PRBool boolpref;
-    CMSetPrefList prefs = {0};
-    CMTSetPrefElement* list = NULL;
-
-    char* pickAuto = "Select Automatically";
-    char* alwaysAsk = "Ask Every Time";
-    
-    nsCOMPtr<nsIPref> prefManager;
-
-    nsresult res = nsServiceManager::GetService(kPrefCID, 
-                                                nsIPref::GetIID(), 
-                                                getter_AddRefs(prefManager));
-
-    if (NS_OK != res) 
-    {
-        return NS_ERROR_FAILURE;
-    }
-
-    /* allocate memory for list */
-    prefs.n = 0; /* counter */
-    prefs.capacity = INIT_NUM_PREFS;
-    prefs.list = (CMTSetPrefElement*) new char[(INIT_NUM_PREFS * sizeof(CMTSetPrefElement))];
-    
-    if (prefs.list == NULL) 
-    {
-         return rv;
-    }
-
-    /* shorthand */
-    list = prefs.list;
-
-    /* get preferences */
-    get_pack_bool_pref(prefManager, "security.enable_ssl2", (CMTSetPrefElement*)list, &(prefs.n));
-    get_pack_bool_pref(prefManager, "security.enable_ssl3", (CMTSetPrefElement*)list, &(prefs.n));
-
-    /* this pref is a boolean pref in nature but a string pref for 
-     * historical reason
-     */
-
-    list[prefs.n].key = nsCRT::strdup("security.default_personal_cert");
-    list[prefs.n].type = STRING_PREF;
-
-    if ((prefManager->CopyCharPref(list[prefs.n].key, &strpref) == 0) && (strcmp(strpref, pickAuto) == 0)) 
-    {
-         list[prefs.n].value = nsCRT::strdup(pickAuto);
-    }
-    else 
-    {
-         /* although one could choose a specific cert for client auth in
-          * Nova, that mode is deprecated with PSM and mapped to ASK
-          */
-         list[prefs.n].value = nsCRT::strdup(alwaysAsk);
-    }
-
-    prefs.n++;
-    if (strpref != NULL) 
-    {
-         nsCRT::free(strpref);
-    }
-
-    list[prefs.n].key = nsCRT::strdup("security.default_mail_cert");
-    list[prefs.n].type = STRING_PREF;
-    if (prefManager->CopyCharPref(list[prefs.n].key, &list[prefs.n].value) != 0) 
-    {
-         list[prefs.n].value = NULL;
-    }
-    prefs.n++;
-
-    list[prefs.n].key = nsCRT::strdup("security.ask_for_password");
-    list[prefs.n].type = INT_PREF;
-    if (prefManager->GetIntPref(list[prefs.n].key, &intpref) != 0) 
-    {
-         intpref = 0;    /* default */
-    }
-
-    list[prefs.n].value = PR_smprintf("%d", intpref);
-    prefs.n++;
-
-    list[prefs.n].key = nsCRT::strdup("security.password_lifetime");
-    list[prefs.n].type = INT_PREF;
-    if (prefManager->GetIntPref(list[prefs.n].key, &intpref) != 0) 
-    {
-         intpref = 30;    /* default */
-    }
-
-    list[prefs.n].value = PR_smprintf("%d", intpref);
-    prefs.n++;
-
-    /* OCSP preferences */
-    /* XXX since these are the new ones added by PSM, we will be more
-     *     error-tolerant in fetching them
-     */
-    if (prefManager->GetBoolPref("security.OCSP.enabled", &boolpref) == 0) 
-    {
-         if (boolpref) 
-        {
-             list[prefs.n].value = nsCRT::strdup("true");
-         }
-         else 
-        {
-             list[prefs.n].value = nsCRT::strdup("false");
-         }
-         list[prefs.n].key = nsCRT::strdup("security.OCSP.enabled");
-         list[prefs.n].type = BOOL_PREF;
-         prefs.n++;
-    }
-
-    if (prefManager->GetBoolPref("security.OCSP.useDefaultResponder", &boolpref) == 0) 
-    {
-         if (boolpref) 
-        {
-             list[prefs.n].value = nsCRT::strdup("true");
-         }
-         else 
-        {
-             list[prefs.n].value = nsCRT::strdup("false");
-         }
-         list[prefs.n].key = nsCRT::strdup("security.OCSP.useDefaultResponder");
-         list[prefs.n].type = BOOL_PREF;
-         prefs.n++;
-    }
-
-    if (prefManager->CopyCharPref("security.OCSP.URL", &strpref) == 0) 
-    {
-         list[prefs.n].value = strpref;
-         list[prefs.n].key = nsCRT::strdup("security.OCSP.URL");
-         list[prefs.n].type = STRING_PREF;
-         prefs.n++;
-    }
-
-    if (prefManager->CopyCharPref("security.OCSP.signingCA", &strpref) == 0) 
-    {
-         list[prefs.n].value = strpref;
-         list[prefs.n].key = nsCRT::strdup("security.OCSP.signingCA");
-         list[prefs.n].type = STRING_PREF;
-         prefs.n++;
-    }
-
-    /* now application-specific preferences */
-    /* get navigator preferences */
-    get_pack_bool_pref(prefManager, "security.warn_entering_secure", (CMTSetPrefElement*)list, &prefs.n);
-    get_pack_bool_pref(prefManager, "security.warn_leaving_secure",  (CMTSetPrefElement*)list, &prefs.n);
-    get_pack_bool_pref(prefManager, "security.warn_viewing_mixed",   (CMTSetPrefElement*)list, &prefs.n);
-    get_pack_bool_pref(prefManager, "security.warn_submit_insecure", (CMTSetPrefElement*)list, &prefs.n);
-
-    // Add any other prefs here such as ldap or mail/news.
-     
-     CMT_SetSavePrefsCallback(mControl, (savePrefsCallback_fn)SaveAllPrefs);
-
-    if (CMT_PassAllPrefs(mControl, prefs.n, (CMTSetPrefElement*)prefs.list) !=  CMTSuccess) 
-    {
-         goto loser;
-    }
-
-    rv = NS_OK; /* success */
-loser:
-    /* clean out memory for prefs */
-    for (i = 0; i < prefs.n; i++) 
-    {
-         if (prefs.list[i].key != NULL) 
-        {
-             nsCRT::free(prefs.list[i].key);
-         }
-         
-        if (prefs.list[i].value != NULL) 
-        {
-             nsCRT::free(prefs.list[i].value);
-         }
-    }
-
-    if (prefs.list != NULL) 
-    {
-         delete(prefs.list);
-    }
-    return rv;
-}
-
-#ifdef XP_MAC
-extern "C" {
-    void RunMacPSM(void* arg);
-    PRThread* SSM_CreateAndRegisterThread(PRThreadType type, void (*start)(void *arg),
-                                          void *arg, PRThreadPriority priority,
-                                          PRThreadScope scope, PRThreadState state,
-                                          PRUint32 stackSize);
-    void SSM_KillAllThreads(void);
-}
-#endif
-            
-NS_IMETHODIMP
-nsPSMComponent::GetControlConnection( CMT_CONTROL * *_retval )
-{
-     nsresult rv;
-     *_retval = nsnull;
-    if (mControl) 
-    {
-        *_retval = mControl;
-        return NS_OK;
-    }
-    else      /* initialize mutex, sock table, etc. */
-    {
-            
-        if (nsPSMMutexInit() != PR_SUCCESS)
-            return NS_ERROR_FAILURE;
-
-#ifdef XP_MAC
-        /* FIXME:  Really need better error handling in PSM, which simply exits on error. */
-        /* use a cached monitor to rendezvous with the PSM thread. */
-        PRMonitor* monitor = PR_CEnterMonitor(this);
-        if (monitor != nsnull) {
-            /* create the Cartman thread, and let it run awhile to get things going. */
-            PRThread* cartmanThread = SSM_CreateAndRegisterThread(PR_USER_THREAD, RunMacPSM, 
-							                                      this, PR_PRIORITY_NORMAL,
-							                                      PR_LOCAL_THREAD, PR_UNJOINABLE_THREAD, 0);
-            if (cartmanThread != nsnull) {
-                /* need a good way to rendezvouz with the Cartman thread. */
-                PR_CWait(this, PR_INTERVAL_NO_TIMEOUT);
-            }
-            
-            PR_CExitMonitor(this);
-        }
-#endif
-
-        // Try to see if it is open already
-        mControl = CMT_ControlConnect(&nsPSMMutexTbl, &nsPSMShimTbl);
-        
-        // Find the one in the bin directory
-        if (mControl == nsnull)
-        {
-            nsCOMPtr<nsILocalFile> psmAppFile;
-            NS_WITH_SERVICE(nsIProperties, directoryService, NS_DIRECTORY_SERVICE_PROGID, &rv);
-            if (NS_FAILED(rv)) return rv;
-
-            directoryService->Get("system.OS_CurrentProcessDirectory", 
-                                   NS_GET_IID(nsIFile), 
-                                   getter_AddRefs(psmAppFile));
-
-        
-            psmAppFile->Append("psm");
-            psmAppFile->Append(PSM_FILE_NAME);
-        
-            PRBool isExecutable, exists;
-            psmAppFile->Exists(&exists);
-            psmAppFile->IsExecutable(&isExecutable);
-            if (exists && isExecutable)
-            {
-                nsXPIDLCString path;
-                psmAppFile->GetPath(getter_Copies(path));
-                // FIX THIS.  using a file path is totally wrong here.  
-                mControl = CMT_EstablishControlConnection((char*)(const char*)path, &nsPSMShimTbl, &nsPSMMutexTbl);
-            }
-        }
-
-        // Get the one in the version registry           
-        if (mControl == nsnull)
-        {
-            //Try to find it.
-            int err;
-            char filepath[MAXREGPATHLEN];
-
-            err = VR_GetPath(PSM_VERSION_REG_KEY, sizeof(filepath), filepath);
-            if ( err == REGERR_OK )
-            {
-                nsFileSpec psmSpec(filepath);
-                psmSpec += PSM_FILE_NAME;
-		
-                if (psmSpec.Exists())
-                {
-                    mControl = CMT_EstablishControlConnection((char *)psmSpec.GetNativePathCString(), &nsPSMShimTbl, &nsPSMMutexTbl);
-                }
-            }
-         }
-
-        
-        if (!mControl || InitPSMUICallbacks(mControl) != PR_SUCCESS)
-            goto failure;
-
-        nsFileSpec profileSpec;
-        PRUnichar*      profileName;
-        
-        NS_WITH_SERVICE(nsIProfile, profile, kProfileCID, &rv);
-        if (NS_FAILED(rv)) goto failure;
-        
-        rv = profile->GetCurrentProfileDir(&profileSpec);
-        if (NS_FAILED(rv)) goto failure;;
-        
-#ifdef XP_MAC
-        profileSpec += "Security";
-        // make sure the dir exists
-        profileSpec.CreateDirectory();
-#endif
-        
-        rv = profile->GetCurrentProfile(&profileName);
-        if (NS_FAILED(rv)) goto failure;
-          
-        CMTStatus psmStatus;
-        nsCAutoString profilenameC;
-        profilenameC.AssignWithConversion(profileName);
-
-        psmStatus = CMT_Hello( mControl, 
-                               PROTOCOL_VERSION, 
-                               profilenameC, 
-                               (char*)profileSpec.GetNativePathCString());        
-        
-        if (psmStatus == CMTFailure)
-        {  
-            PR_FREEIF(profileName);       
-            goto failure;
-        }
-        
-        if (InitPSMEventLoop(mControl) != PR_SUCCESS)
-        {
-            PR_FREEIF(profileName);       
-            goto failure;
-        }
-            
-        if (NS_FAILED(PassPrefs()))
-        {  
-            PR_FREEIF(profileName);       
-            goto failure;
-        }
-
-        PR_FREEIF(profileName);
-        
-        nsCOMPtr<nsIProtocolProxyService> proxySvc = do_GetService(kProtocolProxyServiceCID, &rv);
-        if (NS_FAILED(rv)) return rv;
-        proxySvc->AddNoProxyFor("127.0.0.1", mControl->port);
-        
-        *_retval = mControl;
-        return NS_OK;
-    }
-
-failure:
-#ifdef DEBUG
-    printf("*** Failure setting up Cartman! \n");
-#endif
-
-    if (mControl)
-    {
-        CMT_CloseControlConnection(mControl);
-        mControl = NULL;
-    }
-
-    // TODO we need to unregister our UI callback BEFORE destroying our mutex.
-    // nsPSMMutexDestroy();
-
-    return NS_ERROR_FAILURE;
-}
-
-NS_IMETHODIMP
-nsPSMComponent::DisplaySecurityAdvisor(const char *pickledStatus, const char *hostName)
-{
-    CMT_CONTROL *controlConnection;
-    GetControlConnection( &controlConnection );
-    if (DisplayPSMUIDialog(controlConnection, pickledStatus, hostName) == PR_SUCCESS)
-        return NS_OK;
-    return NS_ERROR_FAILURE;
-}
-
-class CertDownloader : public nsIStreamListener
-{
-    public:
-        CertDownloader() {NS_ASSERTION(0, "don't use this constructor."); }
-        CertDownloader(PRInt32 type);
-        virtual ~CertDownloader();
-
-        NS_DECL_ISUPPORTS
-        NS_DECL_NSISTREAMOBSERVER
-        NS_DECL_NSISTREAMLISTENER
-    protected:
-        char* mByteData;
-        PRInt32 mBufferOffset;
-        PRInt32 mContentLength;
-        PRInt32 mType;
-};
-
-
-CertDownloader::CertDownloader(PRInt32 type)
-{
-    NS_INIT_REFCNT();
-    mByteData = nsnull;
-    mType = type;
-}
-
-CertDownloader::~CertDownloader()
-{
-    if (mByteData)
-        nsMemory::Free(mByteData);
-}
-
-NS_IMPL_ISUPPORTS(CertDownloader,NS_GET_IID(nsIStreamListener));
-
-
-NS_IMETHODIMP
-CertDownloader::OnStartRequest(nsIChannel* channel, nsISupports* context)
-{
-    channel->GetContentLength(&mContentLength);
-    if (mContentLength == -1)
-        return NS_ERROR_FAILURE;
-    
-    mBufferOffset = 0;
-    mByteData = (char*) nsMemory::Alloc(mContentLength);
-    if (!mByteData)
-        return NS_ERROR_OUT_OF_MEMORY;
-
-    return NS_OK;
-}
-
-
-NS_IMETHODIMP
-CertDownloader::OnDataAvailable(nsIChannel* channel, 
-                                nsISupports* context,
-                                nsIInputStream *aIStream, 
-                                PRUint32 aSourceOffset,
-                                PRUint32 aLength)
-{
-    if (!mByteData)
-        return NS_ERROR_OUT_OF_MEMORY;
-
-    PRUint32 amt;
-    nsresult err;
-
-    do 
-    {
-        err = aIStream->Read(mByteData+mBufferOffset, mContentLength-mBufferOffset, &amt);
-        if (amt == 0) break;
-        if (NS_FAILED(err))  return err;
-        
-        aLength -= amt;
-        mBufferOffset += amt;
-
-    } while (aLength > 0);
-    
-    return NS_OK;
-}
-
-
-NS_IMETHODIMP
-CertDownloader::OnStopRequest(nsIChannel* channel, 
-                              nsISupports* context,
-                              nsresult aStatus,
-                              const PRUnichar* aMsg)
-{
-
-    nsCOMPtr<nsIPSMComponent> psm = do_QueryInterface(context);
-
-    if (!psm) return NS_ERROR_FAILURE;
-
-    CMT_CONTROL *controlConnection;
-    psm->GetControlConnection( &controlConnection );
-    unsigned int certID;
-                    
-    certID = CMT_DecodeAndCreateTempCert(controlConnection, mByteData, mContentLength, mType);
-
-    if (certID)
-        CMT_DestroyResource(controlConnection, certID, SSM_RESTYPE_CERTIFICATE);
-
-  return NS_OK;
-}
-
-
-/* other mime types that we should handle sometime:
-
-application/x-pkcs7-crl
-application/x-pkcs7-mime
-application/pkcs7-signature
-application/pre-encrypted
-
-*/
-
-
-NS_IMETHODIMP 
-nsPSMComponent::HandleContent(const char * aContentType, 
-                              const char * aCommand, 
-                              const char * aWindowTarget, 
-                              nsISupports* aWindowContext, 
-                              nsIChannel * aChannel)
-{
-    // We were called via CI.  We better protect ourselves and addref.
-    NS_ADDREF_THIS();
-
-    nsresult rv = NS_OK;
-    if (!aChannel) return NS_ERROR_NULL_POINTER;
-    
-    CMUint32 type = -1;
-
-    if ( nsCRT::strcasecmp(aContentType, "application/x-x509-ca-cert") == 0)
-    {
-        type = 1;  //CA cert
-    }
-    else if (nsCRT::strcasecmp(aContentType, "application/x-x509-server-cert") == 0)
-    {
-        type =  2; //Server cert
-    }
-    else if (nsCRT::strcasecmp(aContentType, "application/x-x509-user-cert") == 0)
-    {
-        type =  3; //User cert
-    }
-    else if (nsCRT::strcasecmp(aContentType, "application/x-x509-email-cert") == 0)
-    {
-        type =  4; //Someone else's email cert
-    }
-    
-    if (type != -1)
-    {
-        // I can't directly open the passed channel cause it fails :-(
-
-        nsCOMPtr<nsIURI> uri;
-        rv = aChannel->GetURI(getter_AddRefs(uri));
-        if (NS_FAILED(rv)) return rv;
-
-        nsCOMPtr<nsIChannel> channel;
-        rv = NS_OpenURI(getter_AddRefs(channel), uri);
-        if (NS_FAILED(rv)) return rv;
-
-        return channel->AsyncRead(new CertDownloader(type), NS_STATIC_CAST(nsIPSMComponent*,this));
-    }
-
-    return NS_ERROR_NOT_IMPLEMENTED;
-}
-
-
-//---------------------------------------------
-// Functions Implenenting NSISignatureVerifier
-//---------------------------------------------
-NS_IMETHODIMP
-nsPSMComponent::HashBegin(PRUint32 alg, PRUint32* id)
-{
-  CMT_CONTROL *controlConnection;
-  if (NS_FAILED(GetControlConnection( &controlConnection )))
-    return NS_ERROR_FAILURE;
-
-  if(CMT_HashCreate(controlConnection, alg, (CMUint32*)id) != CMTSuccess)
-    return NS_ERROR_FAILURE;
-  if(CMT_HASH_Begin(controlConnection, *id) != CMTSuccess)
-    return NS_ERROR_FAILURE;
-
-  return NS_OK;  
-}
-
-NS_IMETHODIMP
-nsPSMComponent::HashUpdate(PRUint32 id, const char* buf, PRUint32 buflen)
-{
-  CMT_CONTROL *controlConnection;
-
-  if (NS_FAILED(GetControlConnection( &controlConnection )))
-    return NS_ERROR_FAILURE;
-  if (CMT_HASH_Update(controlConnection, id, 
-      (const unsigned char*)buf, buflen) != CMTSuccess)    
-    return NS_ERROR_FAILURE;
-    
-  return NS_OK;
-}
-
-NS_IMETHODIMP
-nsPSMComponent::HashEnd(PRUint32 id, unsigned char** hash, 
-                        PRUint32* hashLen, PRUint32 maxLen)
-{
-  if (!hash)
-    return NS_ERROR_ILLEGAL_VALUE;
-
-  CMT_CONTROL *controlConnection;
-  if (NS_FAILED(GetControlConnection( &controlConnection )))
-    return NS_ERROR_FAILURE;
- 
-  if(CMT_HASH_End(controlConnection, id, *hash,
-                        (CMUint32*)hashLen, maxLen) != CMTSuccess)
-    return NS_ERROR_FAILURE;
-  CMT_HASH_Destroy(controlConnection, id);
-  return NS_OK;
-}
-
-NS_IMETHODIMP
-nsPSMComponent::CreatePrincipalFromSignature(const char* aRSABuf, PRUint32 aRSABufLen,
-                                             nsIPrincipal** aPrincipal)
-{
-  PRInt32 errorCode;
-  return VerifySignature(aRSABuf, aRSABufLen, nsnull, 0, &errorCode, aPrincipal);
-}
-
-PR_STATIC_CALLBACK(void)
-UselessPK7DataSink(void* arg, const char* buf, CMUint32 len)
-{
-}
-
-NS_IMETHODIMP
-nsPSMComponent::VerifySignature(const char* aRSABuf, PRUint32 aRSABufLen, 
-                                const char* aPlaintext, PRUint32 aPlaintextLen,
-                                PRInt32* aErrorCode,
-                                nsIPrincipal** aPrincipal)
-{
-  if (!aPrincipal || !aErrorCode)
-    return NS_ERROR_NULL_POINTER;
-  *aErrorCode = 0;
-  *aPrincipal = nsnull;
-
-  CMT_CONTROL *controlConnection;
-  if (NS_FAILED(GetControlConnection( &controlConnection )))
-    return NS_ERROR_FAILURE;
-  
-  //-- Decode the signature stream
-  CMUint32 decoderID;
-  CMInt32* blah = nsnull;
-  CMTStatus result = CMT_PKCS7DecoderStart(controlConnection, nsnull,
-                                           &decoderID, blah,
-                                           UselessPK7DataSink, nsnull);
-  if (result != CMTSuccess) return NS_ERROR_FAILURE;
-  result = CMT_PKCS7DecoderUpdate(controlConnection, decoderID, aRSABuf, aRSABufLen);
-  if (result != CMTSuccess) return NS_ERROR_FAILURE;
-  CMUint32 contentInfo;
-  result = CMT_PKCS7DecoderFinish(controlConnection, 
-                                            decoderID, &contentInfo);
-  if (result != CMTSuccess) return NS_ERROR_FAILURE;
-
-  CMTItem hashItem;
-  hashItem.data = 0;
-  hashItem.len = 0;
-  //-- If a plaintext was provided, hash it.
-  if (aPlaintext)
-  {
-    CMUint32 hashId;
-    CMT_HashCreate(controlConnection, nsISignatureVerifier::SHA1, &hashId);
-    CMT_HASH_Begin(controlConnection, hashId);
-    CMTStatus result = CMT_HASH_Update(controlConnection, hashId, 
-                                       (const unsigned char*)aPlaintext, aPlaintextLen);
-    if (result != CMTSuccess) return NS_ERROR_FAILURE;
-    
-    unsigned char* hash = (unsigned char*)PR_MALLOC(nsISignatureVerifier::SHA1_LENGTH);
-    if (!hash) return NS_ERROR_OUT_OF_MEMORY;
-    CMUint32 hashLen;
-    result = CMT_HASH_End(controlConnection, hashId, hash,
-                          &hashLen, nsISignatureVerifier::SHA1_LENGTH);
-    if (result != CMTSuccess)
-    {
-      PR_FREEIF(hash);
-      return NS_ERROR_FAILURE;
-    }
-    NS_ASSERTION(hashLen == nsISignatureVerifier::SHA1_LENGTH,
-                 "PSMComponent: Hash too short.");
-    CMT_HASH_Destroy(controlConnection, hashId);
-    hashItem.data = hash;
-    hashItem.len = hashLen;
-  }
-
-  //-- Verify signature
-  // We need to call this function even if we're only creating a principal, not
-  // verifying, because PSM won't give us certificate information unless this
-  // function has been called.
-  result = CMT_PKCS7VerifyDetachedSignature(controlConnection, contentInfo,
-                                            6 /* =Object Signing Cert */,
-                                            3 /* =SHA1 algorithm (MD5=2)*/,
-                                            1,/* Save Certificate */
-                                            &hashItem, (CMInt32*)aErrorCode);
-
-  if (result != CMTSuccess) return NS_ERROR_FAILURE;
-  if (aPlaintext && *aErrorCode != 0) return NS_OK; // Verification failed.
-
-  CMUint32 certID;
-  result = CMT_GetRIDAttribute(controlConnection, contentInfo,
-                               SSM_FID_P7CINFO_SIGNER_CERT, &certID);
-  if ((result != CMTSuccess) || !certID) return NS_OK; // No signature present
-  
-  CMTItem fingerprint;
-  result = CMT_GetStringAttribute(controlConnection, certID,
-                                  SSM_FID_CERT_FINGERPRINT, &fingerprint);
-  if (result != CMTSuccess) return NS_ERROR_FAILURE;
-
-  //-- Get a principal
-  nsresult rv;
-  NS_WITH_SERVICE(nsIScriptSecurityManager, secMan,
-                  NS_SCRIPTSECURITYMANAGER_PROGID, &rv)
-    if (NS_FAILED(rv)) return NS_ERROR_FAILURE;
-  rv = secMan->GetCertificatePrincipal((char*)fingerprint.data,
-                                       aPrincipal);
-  if (NS_FAILED(rv)) return rv;
-
-  //-- Get common name and store it in the principal.
-  //   Using common name + organizational unit as the user-visible certificate name
-  nsCOMPtr<nsICertificatePrincipal> certificate = do_QueryInterface(*aPrincipal, &rv);
-  if (NS_FAILED(rv)) return NS_ERROR_FAILURE;
-
-  CMTItem common;
-  result = CMT_GetStringAttribute(controlConnection, certID,
-                                  SSM_FID_CERT_COMMON_NAME, &common);
-  if (result != CMTSuccess) return NS_ERROR_FAILURE;
-  CMTItem subject;
-  result = CMT_GetStringAttribute(controlConnection, certID,
-                                  SSM_FID_CERT_SUBJECT_NAME, &subject);
-  if (result != CMTSuccess) return NS_ERROR_FAILURE;
-
-  nsCAutoString commonName;
-  commonName = (char*)common.data;
-  static const char orgUnitTag[] = " OU=";
-  char* orgUnitPos = PL_strstr((char*)subject.data, orgUnitTag);
-  if (orgUnitPos)
-  {
-    orgUnitPos += sizeof(orgUnitTag)-1;
-    char* orgUnitEnd = PL_strchr(orgUnitPos, ',');
-    PRInt32 orgUnitLen;
-    if(orgUnitEnd)
-      orgUnitLen = orgUnitEnd - orgUnitPos;
-    else
-      orgUnitLen = PL_strlen(orgUnitPos);
-    commonName.Append(' ');
-    commonName.Append(orgUnitPos, orgUnitLen);
-  }
-  char* commonChar = commonName.ToNewCString();
-  if (!commonChar) return NS_ERROR_OUT_OF_MEMORY;
-  rv = certificate->SetCommonName(commonChar);
-  Recycle(commonChar);
-  return rv;
-}
-

mozilla/extensions/psm-glue/src/nsPSMComponent.h

@@ -1,60 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
-*/
-
-#include "nscore.h"
-#include "nsIPSMComponent.h"
-#include "nsISignatureVerifier.h"
-#include "nsIStringBundle.h"
-
-#include "nsIContentHandler.h"
-
-#define SECURITY_STRING_BUNDLE_URL "chrome://communicator/locale/security.properties"
-
-#define NS_PSMCOMPONENT_CID {0xddcae170, 0x5412, 0x11d3, {0xbb, 0xc8, 0x00, 0x00, 0x86, 0x1d, 0x12, 0x37}}
-
-// Implementation of the PSM component interface.
-class nsPSMComponent : public nsIPSMComponent, 
-                       public nsIContentHandler, 
-                       public nsISignatureVerifier
-{
-public:
-  NS_DEFINE_STATIC_CID_ACCESSOR( NS_PSMCOMPONENT_CID );
-
-  nsPSMComponent();
-  virtual ~nsPSMComponent();
-
-  NS_DECL_ISUPPORTS
-  NS_DECL_NSIPSMCOMPONENT
-  NS_DECL_NSICONTENTHANDLER
-  NS_DECL_NSISIGNATUREVERIFIER
-
-  static NS_METHOD CreatePSMComponent(nsISupports* aOuter, REFNSIID aIID, void **aResult);
-
-private:
-  
-  PCMT_CONTROL mControl;
-  
-  nsCOMPtr<nsISupports> mSecureBrowserIU;
-  static nsPSMComponent* mInstance;
-}; 

mozilla/extensions/psm-glue/src/nsPSMModule.cpp

@@ -1,178 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
-*/
-
-#include "nsIModule.h"
-#include "nsIGenericFactory.h"
-
-#include "nsPSMUICallbacks.h"
-#include "nsPSMComponent.h"
-
-#include "nsISecureBrowserUI.h"
-#include "nsSecureBrowserUIImpl.h"
-
-#include "nsSSLSocketProvider.h"
-
-#include "nsSDR.h"
-#include "nsFSDR.h"
-#include "nsCrypto.h"
-#include "nsKeygenHandler.h"
-//For the NS_CRYPTO_PROGID define
-#include "nsDOMCID.h"
-
-#include "nsCURILoader.h"
-#include "nsISupportsUtils.h"
-
-// Define SDR object constructor
-static NS_DEFINE_IID(kISupportsIID, NS_ISUPPORTS_IID);
-static NS_DEFINE_IID(kFormProcessorCID,   NS_IFORMPROCESSOR_CID); 
-
-NS_GENERIC_FACTORY_CONSTRUCTOR_INIT(nsSecretDecoderRing, init)
-NS_GENERIC_FACTORY_CONSTRUCTOR_INIT(nsFSecretDecoderRing, init)
-NS_GENERIC_FACTORY_CONSTRUCTOR_INIT(nsCrypto, init)
-NS_GENERIC_FACTORY_CONSTRUCTOR_INIT(nsPkcs11, init)
-
-static nsModuleComponentInfo components[] =
-{
-    { 
-        PSM_COMPONENT_CLASSNAME,  
-        NS_PSMCOMPONENT_CID, 
-        PSM_COMPONENT_PROGID,   
-        nsPSMComponent::CreatePSMComponent
-    },
-    
-    { 
-        "PSM Content Handler - application/x-x509-ca-cert",  
-        NS_PSMCOMPONENT_CID, 
-        NS_CONTENT_HANDLER_PROGID_PREFIX"application/x-x509-ca-cert",   
-        nsPSMComponent::CreatePSMComponent
-    },
-    
-    { 
-        "PSM Content Handler - application/x-x509-server-cert",  
-        NS_PSMCOMPONENT_CID, 
-        NS_CONTENT_HANDLER_PROGID_PREFIX"application/x-x509-server-cert",   
-        nsPSMComponent::CreatePSMComponent
-    },
-
-    { 
-        "PSM Content Handler - application/x-x509-user-cert",  
-        NS_PSMCOMPONENT_CID, 
-        NS_CONTENT_HANDLER_PROGID_PREFIX"application/x-x509-user-cert",   
-        nsPSMComponent::CreatePSMComponent
-    },
-    
-    { 
-        "PSM Content Handler - application/x-x509-email-cert",  
-        NS_PSMCOMPONENT_CID, 
-        NS_CONTENT_HANDLER_PROGID_PREFIX"application/x-x509-email-cert",   
-        nsPSMComponent::CreatePSMComponent
-    },
-
-
-    { 
-        PSM_UI_HANLDER_CLASSNAME, 
-        NS_PSMUIHANDLER_CID, 
-        PSM_UI_HANLDER_PROGID,  
-        nsPSMUIHandlerImpl::CreatePSMUIHandler
-    },
-
-    { 
-        NS_SECURE_BROWSER_UI_CLASSNAME, 
-        NS_SECURE_BROWSER_UI_CID, 
-        NS_SECURE_BROWSER_UI_PROGID, 
-        nsSecureBrowserUIImpl::Create 
-    },
-
-    { 
-        NS_SECURE_BROWSER_DOCOBSERVER_CLASSNAME, 
-        NS_SECURE_BROWSER_DOCOBSERVER_CID, 
-        NS_SECURE_BROWSER_DOCOBSERVER_PROGID, 
-        nsSecureBrowserUIImpl::Create
-    },
-
-    { 
-        NS_ISSLSOCKETPROVIDER_CLASSNAME,
-        NS_SSLSOCKETPROVIDER_CID,
-        NS_ISSLSOCKETPROVIDER_PROGID,
-        nsSSLSocketProvider::Create 
-    },
-
-    {
-        NS_SDR_CLASSNAME,
-        NS_SDR_CID,
-        NS_SDR_PROGID,
-        nsSecretDecoderRingConstructor
-    },
-
-    {
-        NS_FSDR_CLASSNAME,
-        NS_FSDR_CID,
-        NS_FSDR_PROGID,
-        nsFSecretDecoderRingConstructor
-    },
-    
-    {
-        NS_CRYPTO_CLASSNAME,
-        NS_CRYPTO_CID,
-        NS_CRYPTO_PROGID,
-        nsCryptoConstructor
-    },
-    {
-        NS_PKCS11_CLASSNAME,
-        NS_PKCS11_CID,
-        NS_PKCS11_PROGID,
-        nsPkcs11Constructor
-    }
-
-};
-
-#if 0
-NS_IMPL_NSGETMODULE("PSMComponent", components);
-#endif
-
-extern "C" NS_EXPORT nsresult NSGetModule(nsIComponentManager *servMgr,
-                                          nsIFile* location,
-                                          nsIModule** result)
-{
-  nsresult rv;
-  // Put in code to register KEYGEN form input handler.
-  rv= NS_NewGenericModule("PSMComponent",
-                          sizeof(components) / sizeof(components[0]),
-                          components, nsnull, result);
-  // Register a form processor. The form processor has the opportunity to 
-  // modify the value's passed during form submission. 
-  nsKeygenFormProcessor* testFormProcessor = new nsKeygenFormProcessor(); 
-  nsCOMPtr<nsISupports> formProcessor; 
-  rv = testFormProcessor->QueryInterface(kISupportsIID, 
-                                         getter_AddRefs(formProcessor)); 
-  if (NS_SUCCEEDED(rv) && formProcessor) { 
-    rv = nsServiceManager::RegisterService(kFormProcessorCID, formProcessor); 
-  } 
-  return rv;
-}
-
-
-
-
-

mozilla/extensions/psm-glue/src/nsPSMMutex.c

@@ -1,72 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
-*/
-
-#include "prmon.h"
-#include "prtypes.h"
-
-#include "nsPSMMutex.h"
-
-static PRMonitor *_nsPSMMutexVar;
-
-PRStatus
-nsPSMMutexInit()
-{
-  if (!_nsPSMMutexVar)
-      _nsPSMMutexVar = PR_NewMonitor();
-
-  return _nsPSMMutexVar ? PR_SUCCESS : PR_FAILURE;
-}
-
-PRStatus
-nsPSMMutexDestroy()
-{
-    if (!_nsPSMMutexVar)
-        return PR_FAILURE;
-    
-    PR_Wait(_nsPSMMutexVar, PR_INTERVAL_NO_TIMEOUT);
-
-    PR_DestroyMonitor(_nsPSMMutexVar);
-    return PR_SUCCESS;
-}
-
-static void
-nsPSMMutexLock(CMTMutexPointer *p)
-{
-  PR_EnterMonitor(*(PRMonitor **)p);
-  return;
-}
-
-static void
-nsPSMMutexUnlock(CMTMutexPointer *p)
-{
-  PR_ExitMonitor(*(PRMonitor **)p);
-  return;
-}
-
-CMT_MUTEX nsPSMMutexTbl = 
-{
-  &_nsPSMMutexVar,
-  (CMTMutexFunction)nsPSMMutexLock,
-  (CMTMutexFunction)nsPSMMutexUnlock
-};

mozilla/extensions/psm-glue/src/nsPSMMutex.h

@@ -1,39 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
-*/
-
-#ifndef _NSPSMMUTEX_H
-#define _NSPSMMUTEX_H
-
-#include "cmtcmn.h"
-
-PR_BEGIN_EXTERN_C
-
-PR_EXTERN(CMT_MUTEX) nsPSMMutexTbl;
-
-PR_EXTERN(PRStatus) nsPSMMutexInit(void);
-PR_EXTERN(PRStatus) nsPSMMutexDestroy(void);
-
-PR_END_EXTERN_C
-
-#endif

mozilla/extensions/psm-glue/src/nsPSMShimLayer.c

@@ -1,293 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
-*/
-
-#include "nspr.h"
-#include "nsPSMShimLayer.h"
-
-#ifdef XP_UNIX
-#include <sys/stat.h>
-#include <unistd.h>
-#include "private/pprio.h"  /* for PR_Socket */
-#endif
-
-#define PSM_TIMEOUT_IN_SEC 300
-
-#define NSPSMSHIMMAXFD 50
-
-
-static PRIntervalTime gTimeout  = PR_INTERVAL_NO_TIMEOUT;
-
-CMT_SocketFuncs nsPSMShimTbl =
-{
-    nsPSMShimGetSocket,
-    nsPSMShimConnect,
-    nsPSMShimVerifyUnixSocket,
-    nsPSMShimSend,
-    nsPSMShimSelect,
-    nsPSMShimReceive,
-    nsPSMShimShutdown,
-    nsPSMShimClose
-};
-
-
-CMTSocket
-nsPSMShimGetSocket(int unixSock)
-{
-    PRStatus   rv;
-    PRFileDesc *fd;
-    CMSocket   *sock;
-    PRSocketOptionData sockopt;
-
-    /*
-    if (PR_INTERVAL_NO_WAIT == gTimeout) 
-    {
-        gTimeout  = PR_SecondsToInterval(PSM_TIMEOUT_IN_SEC);
-    }
-    */
-
-    if (unixSock)
-    {
-#ifndef XP_UNIX        
-        return NULL;
-#else
-        fd = PR_Socket(PR_AF_LOCAL, PR_SOCK_STREAM, 0);
-        PR_ASSERT(fd);
-#endif
-    }
-    else
-    {
-        fd = PR_NewTCPSocket();
-        PR_ASSERT(fd);
-
-        /* disable Nagle algorithm delay for control sockets */
-        sockopt.option = PR_SockOpt_NoDelay;
-        sockopt.value.no_delay = PR_TRUE;   
-        rv = PR_SetSocketOption(fd, &sockopt);
-        PR_ASSERT(PR_SUCCESS == rv);
-    }
-
-    sock = (CMSocket *)PR_Malloc(sizeof(CMSocket));
-
-    if (sock == NULL)
-      return sock;
-    
-    sock->fd     = fd;
-    sock->isUnix = unixSock;
-
-    memset(&sock->netAddr, 0, sizeof(PRNetAddr));
-    
-    return (CMTSocket)sock;
-}
-
-CMTStatus
-nsPSMShimConnect(CMTSocket sock, short port, char *path)
-{
-    CMTStatus   rv = CMTSuccess;
-    PRStatus    err;
-    PRErrorCode errcode;
-    PRSocketOptionData   sockopt;
-    PRBool      nonBlocking;
-    CMSocket    *cmSock = (CMSocket *)sock;
-    
-    if (!sock) return CMTFailure;
-
-    if (cmSock->isUnix)
-    {
-#ifndef XP_UNIX
-        return CMTFailure;
-#else
-        int pathLen;
-        if (!path)
-        {
-            return CMTFailure;
-        }
-
-        /* check buffer overrun */
-        pathLen = strlen(path)+1;
-        
-        pathLen = pathLen < sizeof(cmSock->netAddr.local.path)
-                ? pathLen : sizeof(cmSock->netAddr.local.path);
-  
-        memcpy(&cmSock->netAddr.local.path, path, pathLen);
-        cmSock->netAddr.local.family = PR_AF_LOCAL;
-#endif
-    }
-    else  /* cmSock->isUnix */
-    {
-        cmSock->netAddr.inet.family = PR_AF_INET;
-        cmSock->netAddr.inet.port   = PR_htons(port);
-        cmSock->netAddr.inet.ip     = PR_htonl(PR_INADDR_LOOPBACK);
-    }
-
-    /* Save non-blocking status */
-    sockopt.option = PR_SockOpt_Nonblocking;
-    err = PR_GetSocketOption(cmSock->fd, &sockopt);
-    PR_ASSERT(PR_SUCCESS == err);
-
-    nonBlocking = sockopt.value.non_blocking;
-
-    /* make connect blocking for now */
-    sockopt.option = PR_SockOpt_Nonblocking;
-    sockopt.value.non_blocking = PR_FALSE;   
-    err = PR_SetSocketOption(cmSock->fd, &sockopt);
-    PR_ASSERT(PR_SUCCESS == err);
-
-    err = PR_Connect( cmSock->fd, &cmSock->netAddr, PR_INTERVAL_MAX );
-    
-    if (err == PR_FAILURE)    
-    {
-        errcode = PR_GetError();
-        
-        if (PR_IS_CONNECTED_ERROR != errcode)
-            rv = CMTFailure;
-    }    
-    
-    /* restore nonblock status */
-    if (nonBlocking) {
-      sockopt.option = PR_SockOpt_Nonblocking;
-      sockopt.value.non_blocking = nonBlocking;  
-      err = PR_SetSocketOption(cmSock->fd, &sockopt);
-      PR_ASSERT(PR_SUCCESS == err);
-    }
-
-    return rv;
-}
-
-CMTStatus
-nsPSMShimVerifyUnixSocket(CMTSocket sock)
-{
-#ifndef XP_UNIX
-    return CMTFailure;
-#else
-
-    int  rv;
-    CMSocket  *cmSock;
-    struct stat statbuf;
-
-    cmSock = (CMSocket *)sock;
-        
-    if (!cmSock || !cmSock->isUnix) 
-        return CMTFailure;
- 
-    rv = stat(cmSock->netAddr.local.path, &statbuf);
-    if (rv < 0 || statbuf.st_uid != geteuid() )
-    {
-        PR_Close(cmSock->fd);
-        cmSock->fd = NULL;
-        PR_Free(cmSock);
-        return CMTFailure;
-    }
-    return CMTSuccess;   
-#endif
-}
-
-size_t
-nsPSMShimSend(CMTSocket sock, void *buffer, size_t length)
-{
-    CMSocket *cmSock = (CMSocket *)sock;
-
-    if (!sock) return CMTFailure;
-    
-   return PR_Send(cmSock->fd, buffer, length, 0, gTimeout);
-}
-
-size_t
-nsPSMShimReceive(CMTSocket sock, void *buffer, size_t bufSize)
-{
-    CMSocket *cmSock = (CMSocket *)sock;
-    
-    if (!sock) return CMTFailure;
-
-    return PR_Recv(cmSock->fd, buffer, bufSize, 0, gTimeout);
-}
-
-
-CMTSocket
-nsPSMShimSelect(CMTSocket *socks, int numsocks, int poll)
-{
-    CMSocket       **sockArr = (CMSocket **)socks;
-    PRPollDesc       readPDs[NSPSMSHIMMAXFD];
-    PRIntervalTime   timeout;
-    PRInt32          cnt;
-    int              i;
-
-    if (!socks) return NULL;
-
-    memset(readPDs, 0, sizeof(readPDs));
-
-    PR_ASSERT(NSPSMSHIMMAXFD >= numsocks);
-
-    for (i=0; i<numsocks; i++)
-    {
-        readPDs[i].fd       = sockArr[i]->fd;
-        readPDs[i].in_flags = PR_POLL_READ;
-    }
-
-    timeout = poll ? PR_INTERVAL_NO_WAIT : PR_INTERVAL_NO_TIMEOUT;
-
-    cnt = PR_Poll(readPDs, numsocks, timeout);
-
-    /* Figure out which socket was selected */
-    if (cnt > 0)
-    {
-        for (i=0; i<numsocks; i++)
-        {
-            if (readPDs[i].out_flags & PR_POLL_READ)
-            {
-            return (CMTSocket)sockArr[i];
-            }
-        }
-    }
-    return NULL;
-}
-
-
-CMTStatus
-nsPSMShimShutdown(CMTSocket sock)
-{
-    CMSocket *cmSock = (CMSocket*)sock;
-    PRStatus rv;
-
-    if (!sock) return CMTFailure;
-
-    rv = PR_Shutdown(cmSock->fd, PR_SHUTDOWN_SEND);
-    return (PR_SUCCESS == rv) ? CMTSuccess : CMTFailure;
-}
-
-CMTStatus
-nsPSMShimClose(CMTSocket sock)
-{
-    CMSocket *cmSock = (CMSocket*)sock;
-    PRStatus rv      = PR_SUCCESS;
-    PR_ASSERT(cmSock);
-
-    if (!sock) return CMTFailure;
-
-    rv = PR_Close(cmSock->fd);
-    cmSock->fd = NULL;
-
-    PR_Free(cmSock);
-
-    return (PR_SUCCESS == rv) ? CMTSuccess : CMTFailure;
-}

mozilla/extensions/psm-glue/src/nsPSMShimLayer.h

@@ -1,67 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
-*/
-
-#ifndef _NSPSMSHIMLAYER_H_
-#define _NSPSMSHIMLAYER_H_
-
-#include "cmtcmn.h"
-#include "prio.h"
-
-PR_BEGIN_EXTERN_C
-
-typedef struct CMSocket {
-    PRFileDesc *fd;
-    PRBool      isUnix;
-    PRNetAddr   netAddr;
-} CMSocket; 
-
-PR_EXTERN(CMT_SocketFuncs) nsPSMShimTbl;
-
-PR_EXTERN(CMTSocket)
-nsPSMShimGetSocket(int unixSock);
-
-PR_EXTERN(CMTStatus)
-nsPSMShimConnect(CMTSocket sock, short port, char *path);
-
-PR_EXTERN(CMTStatus)
-nsPSMShimVerifyUnixSocket(CMTSocket sock);
-
-PR_EXTERN(size_t)
-nsPSMShimSend(CMTSocket sock, void *buffer, size_t length);
-
-PR_EXTERN(CMTSocket)
-nsPSMShimSelect(CMTSocket *socks, int numsocks, int poll);
-
-PR_EXTERN(size_t)
-nsPSMShimReceive(CMTSocket sock, void *buffer, size_t bufSize);
-
-PR_EXTERN(CMTStatus)
-nsPSMShimShutdown(CMTSocket sock);
-
-PR_EXTERN(CMTStatus)
-nsPSMShimClose(CMTSocket sock);
-
-PR_END_EXTERN_C
-
-#endif /* _NSPSMSHIMLAYER_H_ */

mozilla/extensions/psm-glue/src/nsPSMUICallbacks.cpp

@@ -1,348 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
-*/
-
-#include "nsProxiedService.h"
-#include "nsIEventQueueService.h"
-#include "nsPSMUICallbacks.h"
-#include "nsINetSupportDialogService.h"
-#include "nsIFilePicker.h"
-
-#include "nsAppShellCIDs.h"
-#include "prprf.h"
-#include "prmem.h"
-
-#include "nsSSLIOLayer.h" // for SSMSTRING_PADDED_LENGTH
-#include "ssmdefs.h"
-#include "rsrcids.h"
-
-// Interfaces Needed
-#include "nsIAppShellService.h"
-#include "nsIDocShell.h"
-#include "nsIDOMWindow.h"
-#include "nsIInterfaceRequestor.h"
-#include "nsIPrompt.h"
-#include "nsIScriptGlobalObject.h"
-#include "nsIURL.h"
-#include "nsIXULWindow.h"
-
-static NS_DEFINE_IID(kAppShellServiceCID, NS_APPSHELL_SERVICE_CID);
-static NS_DEFINE_CID(kNetSupportDialogCID, NS_NETSUPPORTDIALOG_CID);
-
-
-// Happy callbacks
-static char * PromptUserCallback(void *arg, char *prompt, int isPasswd);
-static char * FilePathPromptCallback(void *arg, char *prompt, char *fileRegEx, CMUint32 shouldFileExist);
-static void   ApplicationFreeCallback(char *userInput);
-
-static void * CartmanUIHandler(uint32 resourceID, void* clientContext, uint32 width, uint32 height, 
-								CMBool isModal, char* urlStr, void *data);
-
-extern "C" void CARTMAN_UIEventLoop(void *data);
-
-
-/* nsISupports Implementation for the class */
-NS_IMPL_THREADSAFE_ISUPPORTS1(nsPSMUIHandlerImpl, nsIPSMUIHandler)
-
-NS_METHOD
-nsPSMUIHandlerImpl::DisplayURI(PRInt32 width, PRInt32 height, PRBool modal, const char *urlStr)
-{
-    nsresult rv;
-    nsCOMPtr<nsIDOMWindow> hiddenWindow;
-    JSContext *jsContext;
-
-    NS_WITH_SERVICE(nsIAppShellService, appShell, kAppShellServiceCID, &rv);
-	if (NS_SUCCEEDED(rv))
-	{
-		rv = appShell->GetHiddenWindowAndJSContext( getter_AddRefs( hiddenWindow ),
-                                                    &jsContext );
-
-	     if ( NS_SUCCEEDED( rv ) ) 
-         {
-            // Set up arguments for "window.open"
-            void *stackPtr;
-            char params[36];
-
-            if (modal)  // if you change this, remember to change the buffer size above.
-                strcpy(params, "menubar=no,height=%d,width=%d,modal");
-            else
-                strcpy(params, "menubar=no,height=%d,width=%d");
-
-            char buffer[256];
-            PR_snprintf(buffer,
-                        sizeof(buffer),
-                        params,
-                        height,
-                        width );
-
-            jsval	*argv = JS_PushArguments(jsContext, &stackPtr, "sss", urlStr, "_blank", buffer);
-            if (argv)
-            {
-	            // open the window
-	            nsIDOMWindow	*newWindow;
-	            hiddenWindow->Open(jsContext, argv, 3, &newWindow);
-                newWindow->ResizeTo(width, height);
-	            JS_PopArguments(jsContext, stackPtr);
-            }
-        }
-    }
-    return rv;
-}
-
-NS_IMETHODIMP
-nsPSMUIHandlerImpl::PromptForFile(const PRUnichar *prompt, const char *fileRegEx, PRBool shouldFileExist, char **outFile)
-{
-    NS_ENSURE_ARG_POINTER(outFile);
-    nsCOMPtr<nsIFilePicker> fp = do_CreateInstance("component://mozilla/filepicker");
-    
-    if (!fp)
-        return NS_ERROR_NULL_POINTER;
-
-
-    fp->Init(nsnull, prompt, nsIFilePicker::modeOpen);
-    fp->AppendFilter(NS_ConvertASCIItoUCS2(fileRegEx).GetUnicode(), NS_ConvertASCIItoUCS2(fileRegEx).GetUnicode());  
-    fp->AppendFilters(nsIFilePicker::filterAll);
-    PRInt16 mode;
-    nsresult rv = fp->Show(&mode);
-
-    if (NS_FAILED(rv) || (mode == nsIFilePicker::returnCancel))
-         return rv;
-
-    nsCOMPtr<nsILocalFile> file;
-    rv = fp->GetFile(getter_AddRefs(file));
-
-    if (file)
-      file->GetPath(outFile);
-
-    return rv;
-}
-
-NS_METHOD      
-nsPSMUIHandlerImpl::CreatePSMUIHandler(nsISupports* aOuter, REFNSIID aIID, void **aResult)
-{                                                                  
-    nsresult rv = NS_OK; 
-    if ( aResult ) 
-    { 
-        /* Allocate new find component object. */
-        nsPSMUIHandlerImpl *component = new nsPSMUIHandlerImpl(); 
-        if ( component ) 
-        { 
-            /* Allocated OK, do query interface to get proper */
-            /* pointer and increment refcount.                */
-            rv = component->QueryInterface( aIID, aResult ); 
-            if ( NS_FAILED( rv ) ) 
-            { 
-                /* refcount still at zero, delete it here. */
-                delete component; 
-            } 
-        } 
-        else 
-        { 
-            rv = NS_ERROR_OUT_OF_MEMORY; 
-        } 
-    } 
-    else 
-    { 
-        rv = NS_ERROR_NULL_POINTER; 
-    } 
-    return rv; 
-} 
-
-
-
-extern "C" void CARTMAN_UIEventLoop(void *data)
-{
-   CMT_EventLoop((PCMT_CONTROL)data);
-}
-
-PRStatus InitPSMEventLoop(PCMT_CONTROL control)
-{
-    PR_CreateThread(PR_USER_THREAD,
-                    CARTMAN_UIEventLoop,
-                    control, 
-                    PR_PRIORITY_NORMAL, 
-                    PR_GLOBAL_THREAD, 
-                    PR_UNJOINABLE_THREAD,
-                    0);  
-
-    return PR_SUCCESS;
-}
-
-PRStatus InitPSMUICallbacks(PCMT_CONTROL control)
-{
-    if (!control)
-        return PR_FAILURE;  
-    
-    CMT_SetPromptCallback(control, (promptCallback_fn)PromptUserCallback, nsnull);
-    CMT_SetAppFreeCallback(control, (applicationFreeCallback_fn) ApplicationFreeCallback);
-    CMT_SetFilePathPromptCallback(control, (filePathPromptCallback_fn) FilePathPromptCallback, nsnull);
-
-    if (CMT_SetUIHandlerCallback(control, (uiHandlerCallback_fn) CartmanUIHandler, NULL) != CMTSuccess) 
-            return PR_FAILURE;
-
-    return PR_SUCCESS;
-}
-
-PRStatus DisplayPSMUIDialog(PCMT_CONTROL control, const char *pickledStatus, const char *hostName)
-{
-    CMUint32 advRID = 0;
-    CMInt32 width = 0;
-    CMInt32 height = 0;
-    CMTItem urlItem = {0, NULL, 0};
-    CMTStatus rv = CMTSuccess;
-    CMTItem advisorContext = {0, NULL, 0};
-    void * pwin;
-
-    CMTSecurityAdvisorData data;
-    memset(&data, '\0', sizeof(CMTSecurityAdvisorData));
-    
-    if (hostName)
-    {
-        // if there is a hostName, than this request is about
-        // a webpage.  
-        data.hostname    = (char*) hostName;
-        data.infoContext = SSM_BROWSER;
-    
-        if (pickledStatus)
-        {
-            CMTItem pickledResource = {0, NULL, 0};
-            CMUint32 socketStatus = 0;
-    
-            pickledResource.len = *(int*)(pickledStatus);
-            pickledResource.data = (unsigned char*) PR_Malloc(SSMSTRING_PADDED_LENGTH(pickledResource.len));
-        
-            if (! pickledResource.data) return PR_FAILURE;
-
-            memcpy(pickledResource.data, pickledStatus+sizeof(int), pickledResource.len);
-        
-            /* Unpickle the SSL Socket Status */
-            if (CMT_UnpickleResource( control, 
-                                      SSM_RESTYPE_SSL_SOCKET_STATUS,
-                                      pickledResource, 
-                                      &socketStatus) == CMTSuccess)
-            {
-                data.infoContext = SSM_BROWSER;    
-                data.resID = socketStatus;
-            }
-
-            PR_FREEIF(pickledResource.data);
-        }
-    }
-
-    /* Create a Security Advisor context object. */
-    rv = CMT_SecurityAdvisor(control, &data, &advRID);
-
-    if (rv != CMTSuccess)
-        return PR_FAILURE;
-
-    /* Get the URL, width, height, etc. from the advisor context. */
-    rv = CMT_GetStringAttribute(control, 
-                                advRID, 
-                                SSM_FID_SECADVISOR_URL,
-                                &urlItem);
-
-    if ((rv != CMTSuccess) || (!urlItem.data))
-        return PR_FAILURE;
-
-    rv = CMT_GetNumericAttribute(control, 
-                                 advRID, 
-                                 SSM_FID_SECADVISOR_WIDTH,
-                                 &width);
-    if (rv != CMTSuccess)
-        return PR_FAILURE;
-
-    rv = CMT_GetNumericAttribute(control, 
-                                 advRID, 
-                                 SSM_FID_SECADVISOR_HEIGHT,
-                                 &height);
-    if (rv != CMTSuccess)
-        return PR_FAILURE;
-
-    /* Fire the URL up in a window of its own. */
-    pwin = CartmanUIHandler(advRID, nsnull, width, height, CM_FALSE, (char*)urlItem.data, NULL);
-    
-    //allocated by cmt, we can free with free:
-    free(urlItem.data);
-    
-    return PR_SUCCESS;
-}
-
-
-
-void* CartmanUIHandler(uint32 resourceID, void* clientContext, uint32 width, uint32 height, CMBool isModal, char* urlStr, void *data)
-{
-    nsresult rv = NS_OK;
-    
-    NS_WITH_PROXIED_SERVICE(nsIPSMUIHandler, handler, nsPSMUIHandlerImpl::GetCID(), NS_UI_THREAD_EVENTQ, &rv);
-    
-    if(NS_SUCCEEDED(rv))
-	    handler->DisplayURI(width, height, isModal, urlStr);
-
-    return nsnull;
-}
-
-    
-    
-char * PromptUserCallback(void *arg, char *prompt, int isPasswd)
-{
-
-    nsresult rv = NS_OK;
-    PRUnichar *password;
-    PRBool  value;
-
-    NS_WITH_PROXIED_SERVICE(nsIPrompt, dialog, kNetSupportDialogCID, NS_UI_THREAD_EVENTQ, &rv);
-    
-    if (NS_SUCCEEDED(rv)) {
-	    rv = dialog->PromptPassword(nsnull, NS_ConvertASCIItoUCS2(prompt).GetUnicode(),
-                                  NS_ConvertASCIItoUCS2(" ").GetUnicode(),      // hostname
-                                  PR_TRUE, &password, &value);
-
-        if (NS_SUCCEEDED(rv) && value) {
-            nsString a(password);
-            char* str = a.ToNewCString();
-            Recycle(password);
-            return str;
-        }
-    }
-
-    return nsnull;
-}
-
-void ApplicationFreeCallback(char *userInput)
-{
-    nsMemory::Free(userInput);
-}
-
-char * FilePathPromptCallback(void *arg, char *prompt, char *fileRegEx, CMUint32 shouldFileExist)
-{
-    nsresult rv = NS_OK;
-    
-    char* filePath = nsnull;
-    
-    NS_WITH_PROXIED_SERVICE(nsIPSMUIHandler, handler, nsPSMUIHandlerImpl::GetCID(), NS_UI_THREAD_EVENTQ, &rv);
-    
-    if(NS_SUCCEEDED(rv))
-	    handler->PromptForFile(NS_ConvertASCIItoUCS2(prompt).GetUnicode(), fileRegEx, (PRBool)shouldFileExist, &filePath);
-
-    return filePath;
-}

mozilla/extensions/psm-glue/src/nsPSMUICallbacks.h

@@ -1,56 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
-*/
-
-#ifndef _NSPSMUICALLBACKS_H
-#define _NSPSMUICALLBACKS_H
-
-#include "prtypes.h"
-#include "cmtcmn.h"
-
-#include "nsIPSMUIHandler.h"
-
-PRStatus InitPSMUICallbacks(PCMT_CONTROL gControl);
-PRStatus InitPSMEventLoop(PCMT_CONTROL gControl);
-PRStatus DisplayPSMUIDialog(PCMT_CONTROL control, const char* pickledStatus, const char *hostName);
-
-
-#define NS_PSMUIHANDLER_CID {0x15944e30, 0x601e, 0x11d3, {0x8c, 0x4a, 0x00, 0x00, 0x64, 0x65, 0x73, 0x74}}
-
-class nsPSMUIHandlerImpl : public nsIPSMUIHandler 
-{
-    public:
-
-        NS_DEFINE_STATIC_CID_ACCESSOR( NS_PSMUIHANDLER_CID );
-    
-        /* ctor/dtor */
-        nsPSMUIHandlerImpl() { NS_INIT_REFCNT(); }
-        virtual ~nsPSMUIHandlerImpl() { }
-
-        NS_DECL_ISUPPORTS
-        NS_DECL_NSIPSMUIHANDLER
-
-        static NS_METHOD CreatePSMUIHandler(nsISupports* aOuter, REFNSIID aIID, void **aResult);
-};
-
-#endif

mozilla/extensions/psm-glue/src/nsSDR.cpp

@@ -1,320 +0,0 @@
-/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
- *
- * The contents of this file are subject to the Netscape Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/NPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s): 
- *  thayes@netscape.com
- */
-
-#include "stdlib.h"
-#include "plstr.h"
-#include "nsMemory.h"
-#include "nsIServiceManager.h"
-
-#include "plbase64.h"
-
-#include "nsISecretDecoderRing.h"
-
-#include "cmtcmn.h"
-#include "nsIPSMComponent.h"
-
-#include "nsSDR.h"
-
-NS_IMPL_ISUPPORTS1(nsSecretDecoderRing, nsISecretDecoderRing)
-
-nsSecretDecoderRing::nsSecretDecoderRing()
-{
-  NS_INIT_ISUPPORTS();
-
-  mPSM = NULL;
-}
-
-nsSecretDecoderRing::~nsSecretDecoderRing()
-{
-  if (mPSM) mPSM->Release();
-}
-
-/* Init the new instance */
-nsresult nsSecretDecoderRing::
-init()
-{
-  nsresult rv;
-  nsISupports *psm;
-
-  rv = nsServiceManager::GetService(kPSMComponentProgID, NS_GET_IID(nsIPSMComponent),
-                                    &psm);
-  if (rv != NS_OK) goto loser;  /* Should promote error */
-
-  mPSM = (nsIPSMComponent *)psm;
-
-loser:
-  return rv;
-}
-
-/* [noscript] long encrypt (in buffer data, in long dataLen, out buffer result); */
-NS_IMETHODIMP nsSecretDecoderRing::
-Encrypt(unsigned char * data, PRInt32 dataLen, unsigned char * *result, PRInt32 *_retval)
-{
-    nsresult rv = NS_OK;
-    unsigned char *r = 0;
-    CMT_CONTROL *control;
-    CMTStatus status;
-    CMUint32 cLen;
-
-    if (data == nsnull || result == nsnull || _retval == nsnull) {
-       rv = NS_ERROR_INVALID_POINTER;
-       goto loser;
-    }
-
-    /* Check object initialization */
-    NS_ASSERTION(mPSM != nsnull, "SDR object not initialized");
-    if (mPSM == nsnull) { rv = NS_ERROR_NOT_INITIALIZED; goto loser; }
-
-    /* Get the control connect to use for the request */
-    rv = mPSM->GetControlConnection(&control);
-    if (rv != NS_OK) { rv = NS_ERROR_NOT_AVAILABLE; goto loser; }
-   
-    status = CMT_SDREncrypt(control, (void *)0, (const unsigned char *)0, 0, 
-               data, dataLen, result, &cLen);
-    if (status != CMTSuccess) { rv = NS_ERROR_FAILURE; goto loser; } /* XXX */
-
-    /* Copy returned data to nsMemory buffer ? */
-    *_retval = cLen;
-
-loser:
-    return rv;
-}
-
-/* [noscript] long decrypt (in buffer data, in long dataLen, out buffer result); */
-NS_IMETHODIMP nsSecretDecoderRing::
-Decrypt(unsigned char * data, PRInt32 dataLen, unsigned char * *result, PRInt32 *_retval)
-{
-    nsresult rv = NS_OK;
-    CMTStatus status;
-    CMT_CONTROL *control;
-    CMUint32 len;
-
-    if (data == nsnull || result == nsnull || _retval == nsnull) {
-       rv = NS_ERROR_INVALID_POINTER;
-       goto loser;
-    }
-
-    /* Check object initialization */
-    NS_ASSERTION(mPSM != nsnull, "SDR object not initialized");
-    if (mPSM == nsnull) { rv = NS_ERROR_NOT_INITIALIZED; goto loser; }
-
-    /* Get the control connection */
-    rv = mPSM->GetControlConnection(&control);
-    if (rv != NS_OK) { rv = NS_ERROR_NOT_AVAILABLE; goto loser; }
-    
-    /* Call PSM to decrypt the value */
-    status = CMT_SDRDecrypt(control, (void *)0, data, dataLen, result, &len);
-    if (status != CMTSuccess) { rv = NS_ERROR_FAILURE; goto loser; } /* Promote? */
-
-    /* Copy returned data to nsMemory buffer ? */
-    *_retval = len;
-
-loser:
-    return rv;
-}
-
-/* string encryptString (in string text); */
-NS_IMETHODIMP nsSecretDecoderRing::
-EncryptString(const char *text, char **_retval)
-{
-    nsresult rv = NS_OK;
-    unsigned char *encrypted = 0;
-    PRInt32 eLen;
-
-    if (text == nsnull || _retval == nsnull) {
-        rv = NS_ERROR_INVALID_POINTER;
-        goto loser;
-    }
-
-    rv = Encrypt((unsigned char *)text, PL_strlen(text), &encrypted, &eLen);
-    if (rv != NS_OK) { goto loser; }
-
-    rv = encode(encrypted, eLen, _retval);
-
-loser:
-    if (encrypted) nsMemory::Free(encrypted);
-
-    return rv;
-}
-
-/* string decryptString (in string crypt); */
-NS_IMETHODIMP nsSecretDecoderRing::
-DecryptString(const char *crypt, char **_retval)
-{
-    nsresult rv = NS_OK;
-    char *r = 0;
-    unsigned char *decoded = 0;
-    PRInt32 decodedLen;
-    unsigned char *decrypted = 0;
-    PRInt32 decryptedLen;
-
-    if (crypt == nsnull || _retval == nsnull) {
-      rv = NS_ERROR_INVALID_POINTER;
-      goto loser;
-    }
-
-    rv = decode(crypt, &decoded, &decodedLen);
-    if (rv != NS_OK) goto loser;
-
-    rv = Decrypt(decoded, decodedLen, &decrypted, &decryptedLen);
-    if (rv != NS_OK) goto loser;
-
-    // Convert to NUL-terminated string
-    r = (char *)nsMemory::Alloc(decryptedLen+1);
-    if (!r) { rv = NS_ERROR_OUT_OF_MEMORY; goto loser; }
-
-    memcpy(r, decrypted, decryptedLen);
-    r[decryptedLen] = 0;
-
-    *_retval = r;
-    r = 0;
-
-loser:
-    if (r) nsMemory::Free(r);
-    if (decrypted) nsMemory::Free(decrypted);
-    if (decoded) nsMemory::Free(decoded);
- 
-    return rv;
-}
-
-/* void changePassword(); */
-NS_IMETHODIMP nsSecretDecoderRing::
-ChangePassword()
-{
-  nsresult rv = NS_OK;
-  CMTStatus status;
-  CMT_CONTROL *control;
-
-  rv = mPSM->GetControlConnection(&control);
-  if (rv != NS_OK) { rv = NS_ERROR_NOT_AVAILABLE; goto loser; }
-
-  status = CMT_SDRChangePassword(control, (void*)0);
-
-loser:
-  return rv;
-}
-
-/* void logout(); */
-NS_IMETHODIMP nsSecretDecoderRing::
-Logout()
-{
-    nsresult rv = NS_OK;
-    CMTStatus status;
-    CMT_CONTROL *control;
-
-    /* Check object initialization */
-    NS_ASSERTION(mPSM != nsnull, "SDR object not initialized");
-    if (mPSM == nsnull) { rv = NS_ERROR_NOT_INITIALIZED; goto loser; }
-
-    /* Get the control connection */
-    rv = mPSM->GetControlConnection(&control);
-    if (rv != NS_OK) { rv = NS_ERROR_NOT_AVAILABLE; goto loser; }
-    
-    /* Call PSM to decrypt the value */
-    status = CMT_LogoutAllTokens(control);
-    if (status != CMTSuccess) { rv = NS_ERROR_FAILURE; goto loser; } /* Promote? */
-
-loser:
-    return rv;
-}
-
-
-// Support routines
-
-nsresult nsSecretDecoderRing::
-encode(const unsigned char *data, PRInt32 dataLen, char **_retval)
-{
-    nsresult rv = NS_OK;
-
-    *_retval = PL_Base64Encode((const char *)data, dataLen, NULL);
-    if (!*_retval) { rv = NS_ERROR_OUT_OF_MEMORY; goto loser; }
-
-loser:
-    return rv;
-
-#if 0
-    nsresult rv = NS_OK;
-    char *r = 0;
-
-    // Allocate space for encoded string (with NUL)
-    r = (char *)nsMemory::Alloc(dataLen+1);
-    if (!r) { rv = NS_ERROR_OUT_OF_MEMORY; goto loser; }
-
-    memcpy(r, data, dataLen);
-    r[dataLen] = 0;
-
-    *_retval = r;
-    r = 0;
-
-loser:
-    if (r) nsMemory::Free(r);
-
-    return rv;
-#endif
-}
-
-nsresult nsSecretDecoderRing::
-decode(const char *data, unsigned char **result, PRInt32 * _retval)
-{
-    nsresult rv = NS_OK;
-    PRUint32 len = PL_strlen(data);
-    int adjust = 0;
-
-    /* Compute length adjustment */
-    if (data[len-1] == '=') {
-      adjust++;
-      if (data[len-2] == '=') adjust++;
-    }
-
-    *result = (unsigned char *)PL_Base64Decode(data, len, NULL);
-    if (!*result) { rv = NS_ERROR_ILLEGAL_VALUE; goto loser; }
-
-    *_retval = (len*3)/4 - adjust;
-
-loser:
-    return rv;
-
-#if 0
-    nsresult rv = NS_OK;
-    unsigned char *r = 0;
-    PRInt32 rLen;
-
-    // Allocate space for decoded string (missing NUL)
-    rLen = PL_strlen(data);
-    r = (unsigned char *)nsMemory::Alloc(rLen);
-    if (!r) { rv = NS_ERROR_OUT_OF_MEMORY; goto loser; }
-
-    memcpy(r, data, rLen);
-
-    *result = r;
-    r = 0;
-    *_retval = rLen;
-
-loser:
-    if (r) nsMemory::Free(r);
-
-    return rv;
-#endif
-}
-
-const char * nsSecretDecoderRing::kPSMComponentProgID = PSM_COMPONENT_PROGID;

mozilla/extensions/psm-glue/src/nsSDR.h

@@ -1,58 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Terry Hayes <thayes@netscape.com>
- */
-
-#ifndef _NSSDR_H_
-#define _NSSDR_H_
-
-#include "nsISecretDecoderRing.h"
-
-// ===============================================
-// nsSecretDecoderRing - implementation of nsISecretDecoderRing
-// ===============================================
-
-#define NS_SDR_CLASSNAME "Secret Decoder Ring"
-#define NS_SDR_CID \
-  { 0xd9a0341, 0xce7, 0x11d4, { 0x9f, 0xdd, 0x0, 0x0, 0x64, 0x65, 0x73, 0x74 } }
-#define NS_SDR_PROGID "netscape.security.sdr"
-
-class nsSecretDecoderRing : public nsISecretDecoderRing
-{
-public:
-  NS_DECL_ISUPPORTS
-  NS_DECL_NSISECRETDECODERRING
-
-  nsSecretDecoderRing();
-  virtual ~nsSecretDecoderRing();
-
-  nsresult init();
-
-private:
-  nsIPSMComponent *mPSM;
-
-  static const char *kPSMComponentProgID;
-
-  nsresult encode(const unsigned char *data, PRInt32 dataLen, char **_retval);
-  nsresult decode(const char *data, unsigned char **result, PRInt32 * _retval);
-};
-
-#endif /* _NSSDR_H_ */

mozilla/extensions/psm-glue/src/nsSSLIOLayer.cpp

@@ -1,550 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
-*/
-
-#include "nspr.h"
-#include "nsString.h"
-#include "cmtcmn.h"
-
-#include "nsIPSMComponent.h"
-#include "nsIPSMSocketInfo.h"
-#include "nsIServiceManager.h"
-#include "nsPSMShimLayer.h"
-#include "nsSSLIOLayer.h"
-
-static PRDescIdentity  nsSSLIOLayerIdentity;
-static PRIOMethods     nsSSLIOLayerMethods;
-static nsIPSMComponent* gPSMService = nsnull;
-
-
-
-class nsPSMSocketInfo : public nsIPSMSocketInfo
-{
-public:
-    nsPSMSocketInfo();
-    virtual ~nsPSMSocketInfo();
-
-    NS_DECL_ISUPPORTS
-    NS_DECL_NSIPSMSOCKETINFO
-
-    // internal functions to psm-glue.
-    nsresult SetSocketPtr(CMSocket *socketPtr);
-    nsresult SetControlPtr(CMT_CONTROL *aControlPtr);
-    nsresult SetFileDescPtr(PRFileDesc *aControlPtr);
-    nsresult SetHostName(char *aHostName);
-    nsresult SetProxyName(char *aName);
-
-    nsresult SetHostPort(PRInt32 aPort);
-    nsresult SetProxyPort(PRInt32 aPort);
-    nsresult SetPickledStatus();
-
-protected:
-    CMT_CONTROL* mControl;
-    CMSocket*    mSocket;
-    PRFileDesc*  mFd;
-    
-    nsString     mHostName;
-    PRInt32      mHostPort;
-    
-    nsString     mProxyName;
-    PRInt32      mProxyPort;
-    
-    unsigned char* mPickledStatus;
-};
-
-
-static PRStatus PR_CALLBACK
-nsSSLIOLayerConnect(PRFileDesc *fd, const PRNetAddr *addr, PRIntervalTime timeout)
-{
-    nsresult                result;
-    PRStatus                rv = PR_SUCCESS;
-    CMTStatus               status = CMTFailure;
-    
-    /* Set the error in case of failure. */
-
-    PR_SetError(PR_UNKNOWN_ERROR, status);
-
-    if (!fd || !addr || !fd->secret || !gPSMService)
-        return PR_FAILURE;
-    
-    char ipBuffer[PR_NETDB_BUF_SIZE];
-    rv = PR_NetAddrToString(addr, (char*)&ipBuffer, PR_NETDB_BUF_SIZE);
-    if (rv != PR_SUCCESS)
-        return PR_FAILURE;
-    
-    if (addr->raw.family == PR_AF_INET6 && PR_IsNetAddrType(addr, PR_IpAddrV4Mapped)) 
-    {
-      /* Chop off the leading "::ffff:" */
-      strcpy(ipBuffer, ipBuffer + 7);
-    }
-
-    
-    CMT_CONTROL *control;
-    result = gPSMService->GetControlConnection(&control);
-    if (result != PR_SUCCESS)
-        return PR_FAILURE;
-    
-    CMSocket* cmsock = (CMSocket *)PR_Malloc(sizeof(CMSocket));
-    if (!cmsock)
-        return PR_FAILURE;
-    
-    memset(cmsock, 0, sizeof(CMSocket));
-    
-    cmsock->fd        = fd->lower;
-    cmsock->isUnix    = PR_FALSE;
-   
-    nsPSMSocketInfo *infoObject = (nsPSMSocketInfo *)fd->secret;
-    
-    infoObject->SetControlPtr(control);
-    infoObject->SetSocketPtr(cmsock);
-    
-    char* proxyName;
-    char* hostName;
-    infoObject->GetProxyName(&proxyName);
-    infoObject->GetHostName(&hostName);
-    
-    if (!proxyName)
-    {
-        // Direct connection
-        status = CMT_OpenSSLConnection(control,
-                                       cmsock,
-                                       SSM_REQUEST_SSL_DATA_SSL,
-                                       PR_ntohs(addr->inet.port),
-                                       ipBuffer,
-                                       (hostName ? hostName : ipBuffer),
-                                       CM_FALSE, 
-                                       nsnull);
-    
-    }
-    else
-    {
-        // not supported yet.
-
-        return PR_FAILURE;
-#if 0
-        PRInt32 destPort;
-        
-        infoObject->GetProxyPort(&destPort);
-
-        status = CMT_OpenSSLProxyConnection(control,
-                                            cmsock,
-                                            destPort, 
-                                            proxyName,  // wants IP
-                                            hostName);
-#endif
-    }
-
-    if (hostName)  Recycle(hostName);
-    if (proxyName) Recycle(proxyName);
-        
-    if (CMTSuccess == status)
-    {
-        // since our stuff can block, what we want to do is return PR_FAILURE,
-        // but set the nspr ERROR to BLOCK.  This will put us into a select
-        // q.
-        PR_SetError(PR_WOULD_BLOCK_ERROR, status);
-        return PR_FAILURE;
-    }
-
-    return PR_FAILURE;
-}
-
-  /* CMT_DestroyDataConnection(ctrl, sock); */
-  /*   need to strip our layer, pass result to DestroyDataConnection */
-  /*   which will clean up the CMT accounting of sock, then call our */
-  /*   shim layer to translate back to NSPR */
-
-static PRStatus PR_CALLBACK
-nsSSLIOLayerClose(PRFileDesc *fd)
-{
-  nsPSMSocketInfo *infoObject    = (nsPSMSocketInfo *)fd->secret;
-  PRDescIdentity          id     = PR_GetLayersIdentity(fd);
-   
-  if (infoObject && id == nsSSLIOLayerIdentity)
-  {
-    CMInt32 errorCode = PR_FAILURE;
-    CMT_CONTROL* control;
-    CMSocket*    socket;
-    
-    PR_Shutdown(fd, PR_SHUTDOWN_BOTH);
-
-    infoObject->GetControlPtr(&control);
-    infoObject->GetSocketPtr(&socket);
-    infoObject->SetPickledStatus();
-
-    CMT_GetSSLDataErrorCode(control, socket, &errorCode);
-    CMT_DestroyDataConnection(control, socket);
-    NS_RELEASE(infoObject);  // if someone is interested in us, the better have an addref.
-    fd->identity = PR_INVALID_IO_LAYER;
-    
-    return (PRStatus)errorCode;
-  }
-
-  return PR_FAILURE;
-}
- 
-static PRInt32 PR_CALLBACK
-nsSSLIOLayerRead( PRFileDesc *fd, void *buf, PRInt32 amount)
-{
-    if (!fd)
-        return PR_FAILURE;
-
-    PRInt32 result = PR_Recv(fd, buf, amount, 0, PR_INTERVAL_MIN);
-    
-    if (result > 0)
-        return result;
-    
-    if (result == -1)
-    {
-        PRErrorCode code = PR_GetError();
-
-        if (code == PR_IO_TIMEOUT_ERROR )
-            PR_SetError(PR_WOULD_BLOCK_ERROR, PR_WOULD_BLOCK_ERROR);
-        return PR_FAILURE;
-    }
-    
-    if (result == 0)
-    {
-        nsPSMSocketInfo *infoObject    = (nsPSMSocketInfo *)fd->secret;
-        PRDescIdentity          id     = PR_GetLayersIdentity(fd);
-
-        if (infoObject && id == nsSSLIOLayerIdentity)
-        {
-            CMInt32 errorCode = PR_FAILURE;
-            
-            CMT_CONTROL* control;
-            CMSocket*    socket;
-    
-            infoObject->GetControlPtr(&control);
-            infoObject->GetSocketPtr(&socket);
-
-            CMT_GetSSLDataErrorCode(control, socket, &errorCode);
-
-			if (errorCode == PR_IO_TIMEOUT_ERROR)
-			{
-				PR_SetError(PR_WOULD_BLOCK_ERROR, PR_WOULD_BLOCK_ERROR);
-				return PR_FAILURE;
-			}
-
-            PR_SetError(0, 0);
-            return errorCode;
-        }
-    }
-
-    return result;
-}
-
-static PRInt32 PR_CALLBACK
-nsSSLIOLayerWrite( PRFileDesc *fd, const void *buf, PRInt32 amount)
-{
-    if (!fd)
-        return PR_FAILURE;
-
-    PRInt32 result = PR_Send(fd, buf, amount, 0, PR_INTERVAL_MIN);
-    
-    if (result > 0)
-        return result;
-
-    if (result == -1)
-    {
-        PRErrorCode code = PR_GetError();
-
-        if (code == PR_IO_TIMEOUT_ERROR )
-            PR_SetError(PR_WOULD_BLOCK_ERROR, PR_WOULD_BLOCK_ERROR);
-        return PR_FAILURE;
-    }
-
-    if (result == 0)
-    {
-        nsPSMSocketInfo *infoObject    = (nsPSMSocketInfo *)fd->secret;
-        PRDescIdentity          id     = PR_GetLayersIdentity(fd);
-
-        if (infoObject && id == nsSSLIOLayerIdentity)
-        {
-            CMInt32 errorCode = PR_FAILURE;
-            CMT_CONTROL* control;
-            CMSocket*    socket;
-    
-            infoObject->GetControlPtr(&control);
-            infoObject->GetSocketPtr(&socket);
-
-            CMT_GetSSLDataErrorCode(control, socket, &errorCode);
-            PR_SetError(0, 0);
-            return errorCode;
-        }
-    }
-    return result;
-}
-
-
-
-nsPSMSocketInfo::nsPSMSocketInfo()
-{ 
-    NS_INIT_REFCNT(); 
-    mControl = nsnull; 
-    mSocket = nsnull;
-    mPickledStatus = nsnull;
-}
-
-nsPSMSocketInfo::~nsPSMSocketInfo()
-{
-    PR_FREEIF(mPickledStatus);    
-}
-
-NS_IMPL_THREADSAFE_ISUPPORTS1(nsPSMSocketInfo, nsIPSMSocketInfo);
-
-NS_IMETHODIMP
-nsPSMSocketInfo::GetControlPtr(CMT_CONTROL * *aControlPtr)
-{
-    *aControlPtr = mControl;
-    return NS_OK;
-}
-
-nsresult
-nsPSMSocketInfo::SetControlPtr(CMT_CONTROL *aControlPtr)
-{
-    mControl = aControlPtr;
-    return NS_OK;
-}
-
-NS_IMETHODIMP
-nsPSMSocketInfo::GetSocketPtr(CMSocket * *socketPtr)
-{
-    *socketPtr = mSocket;
-    return NS_OK;
-}
-
-nsresult
-nsPSMSocketInfo::SetSocketPtr(CMSocket *socketPtr)
-{
-    mSocket = socketPtr;
-    return NS_OK;
-}
-
-NS_IMETHODIMP
-nsPSMSocketInfo::GetFileDescPtr(PRFileDesc * *aFilePtr)
-{
-    *aFilePtr = mFd;
-    return NS_OK;
-}
-
-
-nsresult
-nsPSMSocketInfo::SetFileDescPtr(PRFileDesc *aFilePtr)
-{
-    mFd = aFilePtr;
-    return NS_OK;
-}
-
-NS_IMETHODIMP 
-nsPSMSocketInfo::GetHostName(char * *aHostName)
-{
-    if (mHostName.IsEmpty())
-        *aHostName = nsnull;
-    else
-        *aHostName = mHostName.ToNewCString();
-    return NS_OK;
-}
-
-
-nsresult 
-nsPSMSocketInfo::SetHostName(char *aHostName)
-{
-    mHostName.AssignWithConversion(aHostName);
-    return NS_OK;
-}
-
-NS_IMETHODIMP 
-nsPSMSocketInfo::GetHostPort(PRInt32 *aPort)
-{
-    *aPort = mHostPort;
-    return NS_OK;
-}
-
-nsresult 
-nsPSMSocketInfo::SetHostPort(PRInt32 aPort)
-{
-    mHostPort = aPort;
-    return NS_OK;
-}
-
-
-NS_IMETHODIMP 
-nsPSMSocketInfo::GetProxyName(char * *aName)
-{
-    if (mProxyName.IsEmpty())
-        *aName = nsnull;
-    else
-        *aName = mProxyName.ToNewCString();
-    return NS_OK;
-}
-
-
-nsresult 
-nsPSMSocketInfo::SetProxyName(char *aName)
-{
-    mProxyName.AssignWithConversion(aName);
-    return NS_OK;
-}
-
-
-NS_IMETHODIMP 
-nsPSMSocketInfo::GetProxyPort(PRInt32 *aPort)
-{
-    *aPort = mProxyPort;
-    return NS_OK;
-}
-
-nsresult 
-nsPSMSocketInfo::SetProxyPort(PRInt32 aPort)
-{
-    mProxyPort = aPort;
-    return NS_OK;
-}
-
-
-
-nsresult
-nsPSMSocketInfo::SetPickledStatus()
-{
-    PR_FREEIF(mPickledStatus);
-
-    long level;
-    CMTItem pickledStatus = {0, nsnull, 0};
-    unsigned char* ret    = nsnull;
-
-    if (CMT_GetSSLSocketStatus(mControl, mSocket, &pickledStatus, &level) != PR_FAILURE)
-    {        
-        ret = (unsigned char*) PR_Malloc( (SSMSTRING_PADDED_LENGTH(pickledStatus.len) + sizeof(int)) );
-        if (ret) 
-        {
-            *(int*)ret = pickledStatus.len;
-            memcpy(ret+sizeof(int), pickledStatus.data, *(int*)ret);
-        }
-
-        PR_FREEIF(pickledStatus.data);
-        mPickledStatus = ret;
-    }
-    return NS_OK;
-}
-
-
-NS_IMETHODIMP
-nsPSMSocketInfo::GetPickledStatus(char * *pickledStatusString)
-{
-    if (!mPickledStatus)
-        SetPickledStatus();
-
-    if (mPickledStatus)
-    {
-        PRInt32 len = *(int*)mPickledStatus;
-        char *out = (char *)nsMemory::Alloc(len);
-        memcpy(out, mPickledStatus, len);
-        *pickledStatusString = out;
-        return NS_OK;
-    }
-    *pickledStatusString = nsnull;
-    return NS_ERROR_FAILURE;
-}
-
-nsresult
-nsSSLIOLayerNewSocket( const char *host, 
-                       PRInt32 port, 
-                       const char *proxyHost, 
-                       PRInt32 proxyPort,
-                       PRFileDesc **fd, 
-                       nsISupports** info)
-{
-    static PRBool  firstTime = PR_TRUE;
-    if (firstTime)
-    {
-        nsSSLIOLayerIdentity        = PR_GetUniqueIdentity("Cartman layer");
-        nsSSLIOLayerMethods         = *PR_GetDefaultIOMethods();
-
-        nsSSLIOLayerMethods.connect = nsSSLIOLayerConnect;
-        nsSSLIOLayerMethods.close   = nsSSLIOLayerClose;
-        nsSSLIOLayerMethods.read    = nsSSLIOLayerRead;
-        nsSSLIOLayerMethods.write   = nsSSLIOLayerWrite;
-        
-        
-        nsresult result = nsServiceManager::GetService( PSM_COMPONENT_PROGID,
-                                                        NS_GET_IID(nsIPSMComponent), 
-                                                        (nsISupports**)&gPSMService);  
-        if (NS_FAILED(result))
-            return PR_FAILURE;
-    
-        firstTime                   = PR_FALSE;
-
-    }
-    
-
-    PRFileDesc *   sock;
-    PRFileDesc *   layer;
-    PRStatus       rv;
-
-    /* Get a normal NSPR socket */
-    sock = PR_NewTCPSocket();  
-    if (! sock) return NS_ERROR_OUT_OF_MEMORY;
-    
-    /* disable Nagle algorithm delay for control sockets */
-    PRSocketOptionData sockopt;
-    sockopt.option = PR_SockOpt_NoDelay;
-    sockopt.value.no_delay = PR_TRUE;   
-    rv = PR_SetSocketOption(sock, &sockopt);
-    PR_ASSERT(PR_SUCCESS == rv);
-
-
-    layer = PR_CreateIOLayerStub(nsSSLIOLayerIdentity, &nsSSLIOLayerMethods);
-    if (! layer)
-    {
-        PR_Close(sock);
-        return NS_ERROR_FAILURE;
-    }
-        
-    nsPSMSocketInfo *infoObject = new nsPSMSocketInfo();
-    if (!infoObject)
-    {
-        PR_Close(sock);
-        // clean up IOLayerStub.
-        return NS_ERROR_FAILURE;
-    }
-    
-    NS_ADDREF(infoObject);
-    
-    infoObject->SetHostName((char*)host);
-    infoObject->SetHostPort(port);
-    infoObject->SetProxyName((char*)proxyHost);
-    infoObject->SetProxyPort(proxyPort);
-
-    layer->secret = (PRFilePrivate*) infoObject;
-    rv = PR_PushIOLayer(sock, PR_GetLayersIdentity(sock), layer);
-    
-    if (rv == PR_SUCCESS)
-    {
-        *fd   = sock;
-        *info = infoObject;
-        NS_ADDREF(*info);
-        return NS_OK;
-    }
-    
-    PR_Close(sock);
-    return NS_ERROR_FAILURE;
-}

mozilla/extensions/psm-glue/src/nsSSLIOLayer.h

@@ -1,39 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
-*/
-
-#ifndef _NSSSLIOLAYER_H
-#define _NSSSLIOLAYER_H
-
-#include "prtypes.h"
-#include "prio.h"
-#include "nsIPSMSocketInfo.h"
-
-// define taken from 4.x cartman glue code.  
-#define SSMSTRING_PADDED_LENGTH(x) ((((x)+3)/4)*4)
-
-nsresult nsSSLIOLayerNewSocket(const char *host, 
-                               PRInt32 port, 
-                               const char *proxyHost, 
-                               PRInt32 proxyPort, 
-                               PRFileDesc **fd, 
-                               nsISupports **securityInfo);
-#endif /* _NSSSLIOLAYER_H */

mozilla/extensions/psm-glue/src/nsSSLSocketProvider.cpp

@@ -1,94 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
-*/
-
-#include "nsIComponentManager.h"
-#include "nsIServiceManager.h"
-#include "nsSSLSocketProvider.h"
-#include "nsSSLIOLayer.h"
-
-////////////////////////////////////////////////////////////////////////////////
-
-nsSSLSocketProvider::nsSSLSocketProvider()
-{
-  NS_INIT_REFCNT();
-}
-
-nsresult
-nsSSLSocketProvider::Init()
-{
-  nsresult rv = NS_OK;
-  return rv;
-}
-
-nsSSLSocketProvider::~nsSSLSocketProvider()
-{
-}
-
-NS_IMPL_THREADSAFE_ISUPPORTS2(nsSSLSocketProvider, nsISocketProvider, nsISSLSocketProvider);
-
-NS_METHOD
-nsSSLSocketProvider::Create(nsISupports *aOuter, REFNSIID aIID, void **aResult)
-{                                                                               
-    nsresult rv;                                                                
-                                                                                
-    nsSSLSocketProvider * inst;                                                      
-                                                                                
-    if (NULL == aResult) {                                                      
-        rv = NS_ERROR_NULL_POINTER;                                             
-        return rv;                                                              
-    }                                                                           
-    *aResult = NULL;                                                            
-    if (NULL != aOuter) {                                                       
-        rv = NS_ERROR_NO_AGGREGATION;                                           
-        return rv;                                                              
-    }                                                                           
-                                                                                
-    NS_NEWXPCOM(inst, nsSSLSocketProvider);                                          
-    if (NULL == inst) {                                                         
-        rv = NS_ERROR_OUT_OF_MEMORY;                                            
-        return rv;                                                              
-    }                                                                           
-    NS_ADDREF(inst);                                                            
-    rv = inst->QueryInterface(aIID, aResult);                                   
-    NS_RELEASE(inst);                                                           
-                                                                                
-    return rv;                                                                  
-}                                                                               
-
-
-NS_IMETHODIMP
-nsSSLSocketProvider::NewSocket(const char *host, 
-                               PRInt32 port, 
-                               const char *proxyHost, 
-                               PRInt32 proxyPort, 
-                               PRFileDesc **_result, 
-                               nsISupports **securityInfo)
-{
-  nsresult rv = nsSSLIOLayerNewSocket(host,
-                                      port,
-                                      proxyHost,
-                                      proxyPort,
-                                      _result, 
-                                      securityInfo);
-  
-  return (NS_FAILED(rv)) ? NS_ERROR_SOCKET_CREATE_FAILED : NS_OK;
-}

mozilla/extensions/psm-glue/src/nsSSLSocketProvider.h

@@ -1,54 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
-*/
-
-#ifndef _NSSSLSOCKETPROVIDER_H_
-#define _NSSSLSOCKETPROVIDER_H_
-
-#include "nsISSLSocketProvider.h"
-
-
-/* 274418d0-5437-11d3-bbc8-0000861d1237 */         
-#define NS_SSLSOCKETPROVIDER_CID   { 0x274418d0, 0x5437, 0x11d3, {0xbb, 0xc8, 0x00, 0x00, 0x86, 0x1d, 0x12, 0x37}}
-
-
-class nsSSLSocketProvider : public nsISSLSocketProvider
-{
-public:
-  NS_DECL_ISUPPORTS
-
-  NS_DECL_NSISOCKETPROVIDER
-
-  NS_DECL_NSISSLSOCKETPROVIDER
-
-  // nsSSLSocketProvider methods:
-  nsSSLSocketProvider();
-  virtual ~nsSSLSocketProvider();
-
-  static NS_METHOD
-  Create(nsISupports *aOuter, REFNSIID aIID, void **aResult);
-
-  nsresult Init();
-
-protected:
-};
-
-#endif /* _NSSSLSOCKETPROVIDER_H_ */

mozilla/extensions/psm-glue/src/nsSecureBrowserUIImpl.cpp

@@ -1,654 +0,0 @@
-/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998-2000 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
- *   Stuart Parmenter <pavlov@netscape.com>
-*/
-
-#include "nspr.h"
-#include "prlog.h"
-
-#include "nsISecureBrowserUI.h"
-#include "nsSecureBrowserUIImpl.h"
-#include "nsIPSMComponent.h"
-#include "nsPSMComponent.h"
-#include "nsCOMPtr.h"
-#include "nsIInterfaceRequestor.h"
-#include "nsIServiceManager.h"
-
-#include "nsIScriptGlobalObject.h"
-#include "nsIObserverService.h"
-#include "nsIDocumentLoader.h"
-#include "nsCURILoader.h"
-#include "nsIDocShell.h"
-#include "nsIDocumentViewer.h"
-#include "nsCURILoader.h"
-#include "nsIDocument.h"
-#include "nsIDOMHTMLDocument.h"
-#include "nsIDOMXULDocument.h"
-#include "nsIDOMElement.h"
-#include "nsIDOMWindow.h"
-#include "nsIContent.h"
-#include "nsIWebProgress.h"
-#include "nsIChannel.h"
-#include "nsIPSMSocketInfo.h"
-
-#include "nsIURI.h"
-
-#include "prmem.h"
-
-#include "nsINetSupportDialogService.h"
-#include "nsIPrompt.h"
-#include "nsICommonDialogs.h"
-#include "nsIPref.h"
-
-#include "nsIFormSubmitObserver.h"
-
-static NS_DEFINE_CID(kCStringBundleServiceCID,  NS_STRINGBUNDLESERVICE_CID);
-static NS_DEFINE_CID(kCommonDialogsCID,         NS_CommonDialog_CID );
-static NS_DEFINE_CID(kPrefCID, NS_PREF_CID);
-
-#define ENTER_SITE_PREF      "security.warn_entering_secure"
-#define LEAVE_SITE_PREF      "security.warn_leaving_secure"
-#define MIXEDCONTENT_PREF    "security.warn_viewing_mixed"
-#define INSECURE_SUBMIT_PREF "security.warn_submit_insecure"
-
-#if defined(PR_LOGGING)
-//
-// Log module for nsSecureBroswerUI logging...
-//
-// To enable logging (see prlog.h for full details):
-//
-//    set NSPR_LOG_MODULES=nsSecureBroswerUI:5
-//    set NSPR_LOG_FILE=nspr.log
-//
-// this enables PR_LOG_DEBUG level information and places all output in
-// the file nspr.log
-//
-PRLogModuleInfo* gSecureDocLog = nsnull;
-#endif /* PR_LOGGING */
-
- 
-NS_IMETHODIMP
-nsSecureBrowserUIImpl::Create(nsISupports *aOuter, REFNSIID aIID, void **aResult)
-{
-    nsresult rv;
-
-    nsSecureBrowserUIImpl * inst;
-
-    if (NULL == aResult) {
-        rv = NS_ERROR_NULL_POINTER;
-        return rv;
-    }
-    *aResult = NULL;
-    if (NULL != aOuter) {
-        rv = NS_ERROR_NO_AGGREGATION;
-        return rv;
-    }
-
-    NS_NEWXPCOM(inst, nsSecureBrowserUIImpl);
-    if (NULL == inst) {
-        rv = NS_ERROR_OUT_OF_MEMORY;
-        return rv;
-    }
-    NS_ADDREF(inst);
-    rv = inst->QueryInterface(aIID, aResult);
-    NS_RELEASE(inst);
-
-    return rv;
-}
-
-nsSecureBrowserUIImpl::nsSecureBrowserUIImpl()
-{
-    NS_INIT_REFCNT();
-    
-#if defined(PR_LOGGING)
-    if (nsnull == gSecureDocLog) {
-        gSecureDocLog = PR_NewLogModule("nsSecureBroswerUI");
-    }
-#endif /* PR_LOGGING */
-
-
-    mIsSecureDocument = mMixContentAlertShown = mIsDocumentBroken = PR_FALSE;
-    mLastPSMStatus    = nsnull;
-    mCurrentURI       = nsnull;
-    mSecurityButton   = nsnull;
-}
-
-nsSecureBrowserUIImpl::~nsSecureBrowserUIImpl()
-{
-    PR_FREEIF(mLastPSMStatus);
-}
-
-NS_IMPL_ISUPPORTS4(nsSecureBrowserUIImpl, 
-                   nsSecureBrowserUI, 
-                   nsIWebProgressListener, 
-                   nsIFormSubmitObserver,
-                   nsIObserver); 
-
-
-NS_IMETHODIMP
-nsSecureBrowserUIImpl::Init(nsIDOMWindow *window, nsIDOMElement *button)
-{
-    mSecurityButton = button;
-    mWindow         = window;
-
-    nsresult rv = nsServiceManager::GetService( kPrefCID, 
-                                                NS_GET_IID(nsIPref), 
-                                                getter_AddRefs(mPref));  
-    if (NS_FAILED(rv)) return rv;
-
-    NS_WITH_SERVICE(nsIStringBundleService, service, kCStringBundleServiceCID, &rv);
-    if (NS_FAILED(rv)) return rv;
-
-    nsILocale* locale = nsnull;
-    rv = service->CreateBundle(SECURITY_STRING_BUNDLE_URL, locale, getter_AddRefs(mStringBundle));
-    if (NS_FAILED(rv)) return rv;
-
-    // hook up to the form post notifications:
-    nsIObserverService *svc = 0;
-    rv = nsServiceManager::GetService(NS_OBSERVERSERVICE_PROGID, 
-                                      NS_GET_IID(nsIObserverService), 
-                                      (nsISupports**)&svc );
-    if (NS_SUCCEEDED(rv) && svc) {
-        nsString  topic; topic.AssignWithConversion(NS_FORMSUBMIT_SUBJECT);
-        rv = svc->AddObserver( this, topic.GetUnicode());
-        nsServiceManager::ReleaseService( NS_OBSERVERSERVICE_PROGID, svc );
-    }
-
-    // hook up to the webprogress notifications.
-    nsCOMPtr<nsIDocShell> docShell;
-
-    nsCOMPtr<nsIScriptGlobalObject> sgo = do_QueryInterface(window);
-    if (!sgo) return NS_ERROR_NULL_POINTER;
-
-    sgo->GetDocShell(getter_AddRefs(docShell));
-    if (!docShell) return NS_ERROR_NULL_POINTER;
-
-    nsCOMPtr<nsIWebProgress> wp = do_GetInterface(docShell);
-    if (!wp) return NS_ERROR_NULL_POINTER;
-
-    wp->AddProgressListener(NS_STATIC_CAST(nsIWebProgressListener*,this));
-
-    mInitByLocationChange = PR_TRUE;
-
-    return NS_OK;
-}
-
-NS_IMETHODIMP
-nsSecureBrowserUIImpl::DisplayPageInfoUI()
-{
-    nsresult res;
-    NS_WITH_SERVICE(nsIPSMComponent, psm, PSM_COMPONENT_PROGID, &res);
-    if (NS_FAILED(res)) 
-        return res;
-    
-    nsXPIDLCString host;
-    if (mCurrentURI)
-        mCurrentURI->GetHost(getter_Copies(host));
-    
-    return psm->DisplaySecurityAdvisor(mLastPSMStatus, host);
-}
-
-
-
-
-NS_IMETHODIMP 
-nsSecureBrowserUIImpl::Observe(nsISupports*, const PRUnichar*, const PRUnichar*) 
-{
-    return NS_ERROR_NOT_IMPLEMENTED;
-}
-
-
-static nsresult IsChildOfDomWindow(nsIDOMWindow *parent, nsIDOMWindow *child, PRBool* value)
-{
-    *value = PR_FALSE;
-
-    if (parent == child)
-    {
-        *value = PR_TRUE;
-        return NS_OK;
-    }
-
-    nsCOMPtr<nsIDOMWindow> childsParent;
-    child->GetParent(getter_AddRefs(childsParent));
-        
-    if (childsParent && childsParent.get() != child)
-        IsChildOfDomWindow(parent, childsParent, value);
-    
-    return NS_OK;
-}
-
-
-NS_IMETHODIMP 
-nsSecureBrowserUIImpl::Notify(nsIContent* formNode, nsIDOMWindow* window, nsIURI* actionURL)
-{
-    // Return NS_OK unless we want to prevent this form from submitting.
-
-    if (!window || !actionURL || !formNode) {
-        return NS_OK;
-    }
-    
-    nsCOMPtr<nsIDocument> document; 
-    formNode->GetDocument(*getter_AddRefs(document)); 
-    if (!document) return NS_OK; 
-
-    nsCOMPtr<nsIScriptGlobalObject> globalObject; 
-    document->GetScriptGlobalObject(getter_AddRefs(globalObject)); 
-    nsCOMPtr<nsIDOMWindow> postingWindow = do_QueryInterface(globalObject); 
-    
-    PRBool isChild;
-    IsChildOfDomWindow(mWindow, postingWindow, &isChild);
-
-    if (!isChild)
-        return NS_OK;
-
-    PRBool okayToPost;
-    nsresult res = CheckPost(actionURL, &okayToPost);
-
-    if (NS_SUCCEEDED(res) && okayToPost)
-        return NS_OK;
-    
-    return NS_ERROR_FAILURE;
-}
-
-//  nsIWebProgressListener
-NS_IMETHODIMP 
-nsSecureBrowserUIImpl::OnProgressChange(nsIWebProgress* aWebProgress,
-                                        nsIRequest* aRequest, 
-                                        PRInt32 aCurSelfProgress, 
-                                        PRInt32 aMaxSelfProgress, 
-                                        PRInt32 aCurTotalProgress, 
-                                        PRInt32 aMaxTotalProgress)
-{
-    return NS_OK;
-}
-
-NS_IMETHODIMP 
-nsSecureBrowserUIImpl::OnStateChange(nsIWebProgress* aWebProgress,
-                                     nsIRequest* aRequest, 
-                                     PRInt32 aProgressStateFlags,
-                                     nsresult aStatus)
-{
-    nsresult res = NS_OK;
-
-    if (aRequest == nsnull || !mSecurityButton || !mPref)
-        return NS_ERROR_NULL_POINTER;
-
-    // Get the channel from the request...
-    // If the request is not network based, then ignore it.    
-    nsCOMPtr<nsIChannel> channel;
-    channel = do_QueryInterface(aRequest, &res);
-    if (NS_FAILED(res))
-        return NS_OK;
-
-    nsCOMPtr<nsIURI> loadingURI;
-    channel->GetURI(getter_AddRefs(loadingURI));
-    
-#if defined(DEBUG)
-    nsXPIDLCString temp;
-    loadingURI->GetSpec(getter_Copies(temp));
-    PR_LOG(gSecureDocLog, PR_LOG_DEBUG, ("SecureUI:%p: OnStateChange: %x :%s\n", this, aProgressStateFlags,(const char*)temp));
-#endif
-
-    // A Document is starting to load...
-    if ((aProgressStateFlags & flag_start) && 
-        (aProgressStateFlags & flag_is_network))
-    {
-        // starting to load a webpage
-        PR_FREEIF(mLastPSMStatus); mLastPSMStatus = nsnull;
-
-        mIsSecureDocument = mMixContentAlertShown = mIsDocumentBroken = PR_FALSE;
-
-        res = CheckProtocolContextSwitch( loadingURI, mCurrentURI);    
-        return res;
-    } 
-
-    // A document has finished loading    
-    if ((aProgressStateFlags & flag_stop) &&
-        (aProgressStateFlags & flag_is_network) &&
-        mIsSecureDocument)
-    {
-        if (!mIsDocumentBroken) // and status is okay  FIX
-        {
-            // qi for the psm information about this channel load.
-            nsCOMPtr<nsISupports> info;
-            channel->GetSecurityInfo(getter_AddRefs(info));
-            nsCOMPtr<nsIPSMSocketInfo> psmInfo = do_QueryInterface(info);
-            if (psmInfo)
-            {
-                // Everything looks okay.  Lets stash the picked status.
-                PR_FREEIF(mLastPSMStatus);
-                res = psmInfo->GetPickledStatus(&mLastPSMStatus);
-
-                if (NS_SUCCEEDED(res)) {
-                    PR_LOG(gSecureDocLog, PR_LOG_DEBUG, ("SecureUI:%p: Icon set to lock\n", this));
-                    res = mSecurityButton->SetAttribute( NS_ConvertASCIItoUCS2("level"), NS_ConvertASCIItoUCS2("high") );
-                    return res;
-                }
-            }
-        }
-
-        PR_LOG(gSecureDocLog, PR_LOG_DEBUG, ("SecureUI:%p: Icon set to broken\n", this));
-        mIsDocumentBroken = PR_TRUE;
-        res = mSecurityButton->SetAttribute( NS_ConvertASCIItoUCS2("level"), NS_ConvertASCIItoUCS2("broken"));
-        return res;
-    }
-    
-    ///    if (aProgressStateFlags == nsIWebProgress::flag_net_redirecting)
-    ///    {
-    ///        // need to implmentent.
-    ///    }
-
-    // don't need to do anything more if the page is broken or not secure...
-
-    if (!mIsSecureDocument || mIsDocumentBroken)
-        return NS_OK;
-
-    // A URL is starting to load...
-    if ((aProgressStateFlags & flag_start) &&
-        (aProgressStateFlags & flag_is_request))
-    {   // check to see if we are going to mix content.
-        return CheckMixedContext(loadingURI);
-    }
-
-    // A URL has finished loading...    
-    if ((aProgressStateFlags & flag_stop) &&
-        (aProgressStateFlags & flag_is_request))
-    {
-        if (1)  // FIX status from the flag...
-        {
-            nsCOMPtr<nsISupports> info;
-            channel->GetSecurityInfo(getter_AddRefs(info));
-            nsCOMPtr<nsIPSMSocketInfo> psmInfo = do_QueryInterface(info, &res);
-
-                    // qi for the psm information about this channel load.
-            if (psmInfo) {
-                return NS_OK;    
-            }
-        }
-
-        PR_LOG(gSecureDocLog, PR_LOG_DEBUG, ("SecureUI:%p: OnStateChange - Icon set to broken\n", this));
-        mSecurityButton->SetAttribute( NS_ConvertASCIItoUCS2("level"), NS_ConvertASCIItoUCS2("broken") );
-        mIsDocumentBroken = PR_TRUE;
-    }    
-
-    return res;
-}
-
-
-NS_IMETHODIMP 
-nsSecureBrowserUIImpl::OnLocationChange(nsIURI* aLocation)
-{
-    mCurrentURI = aLocation;
-    
-    if (mInitByLocationChange)
-    {
-        IsURLHTTPS(mCurrentURI, &mIsSecureDocument);
-        mInitByLocationChange = PR_FALSE;
-    }
-
-    return NS_OK;
-}
-
-
-nsresult
-nsSecureBrowserUIImpl::IsURLHTTPS(nsIURI* aURL, PRBool* value)
-{
-	*value = PR_FALSE;
-
-	if (!aURL)
-		return NS_OK;
-
-    char* scheme;
-	aURL->GetScheme(&scheme);
-
-	if (scheme == nsnull)
-		return NS_ERROR_NULL_POINTER;
-
-    if ( PL_strncasecmp(scheme, "https",  5) == 0 )
-		*value = PR_TRUE;
-	
-	nsMemory::Free(scheme);
-	return NS_OK;
-}
-
-
-
-void nsSecureBrowserUIImpl::GetBundleString(const nsString& name, nsString &outString)
-{
-    if (mStringBundle && name.Length() > 0) {
-        PRUnichar *ptrv = nsnull;
-        if (NS_SUCCEEDED(mStringBundle->GetStringFromName(name.GetUnicode(), &ptrv)))
-            outString = ptrv;
-        else
-            outString.SetLength(0);;
-
-        nsMemory::Free(ptrv);
-
-    } else {
-        outString.SetLength(0);;
-    }
-}
-
-nsresult 
-nsSecureBrowserUIImpl::CheckProtocolContextSwitch( nsIURI* newURI, nsIURI* oldURI)
-{
-    nsresult res;
-    PRBool isNewSchemeSecure, isOldSchemeSecure, boolpref;
-
-    res = IsURLHTTPS(oldURI, &isOldSchemeSecure);
-    if (NS_FAILED(res)) 
-        return res;
-    res = IsURLHTTPS(newURI, &isNewSchemeSecure);
-    if (NS_FAILED(res)) 
-        return res;
-
-    // Check to see if we are going from a secure page to and insecure page
-    if ( !isNewSchemeSecure && isOldSchemeSecure)
-    {
-        mSecurityButton->RemoveAttribute( NS_ConvertASCIItoUCS2("level") );
-    
-        if ((mPref->GetBoolPref(LEAVE_SITE_PREF, &boolpref) != 0))
-            boolpref = PR_TRUE;
-        
-        if (boolpref) 
-        {
-            NS_WITH_SERVICE(nsICommonDialogs, dialog, kCommonDialogsCID, &res);
-            if (NS_FAILED(res)) 
-                return res;
-
-            nsAutoString windowTitle, message, dontShowAgain;
-
-            GetBundleString(NS_ConvertASCIItoUCS2("Title"), windowTitle);
-            GetBundleString(NS_ConvertASCIItoUCS2("LeaveSiteMessage"), message);
-            GetBundleString(NS_ConvertASCIItoUCS2("DontShowAgain"), dontShowAgain);
-
-            PRBool outCheckValue = PR_TRUE;
-            dialog->AlertCheck(mWindow, 
-                               windowTitle.GetUnicode(), 
-                               message.GetUnicode(), 
-                               dontShowAgain.GetUnicode(), 
-                               &outCheckValue);
-
-            if (!outCheckValue) {
-                mPref->SetBoolPref(LEAVE_SITE_PREF, PR_FALSE);
-                NS_WITH_SERVICE(nsIPSMComponent, psm, PSM_COMPONENT_PROGID, &res);
-                if (NS_FAILED(res)) 
-                    return res;
-                psm->PassPrefs();
-            }
-        }
-    }
-    // check to see if we are going from an insecure page to a secure one.
-    else if (isNewSchemeSecure && !isOldSchemeSecure)
-    {
-        if ((mPref->GetBoolPref(ENTER_SITE_PREF, &boolpref) != 0))
-            boolpref = PR_TRUE;
-        
-        if (boolpref) 
-        {
-            NS_WITH_SERVICE(nsICommonDialogs, dialog, kCommonDialogsCID, &res);
-            if (NS_FAILED(res)) 
-                return res;
-
-            nsAutoString windowTitle, message, dontShowAgain;
-
-            GetBundleString(NS_ConvertASCIItoUCS2("Title"), windowTitle);
-            GetBundleString(NS_ConvertASCIItoUCS2("EnterSiteMessage"), message);
-            GetBundleString(NS_ConvertASCIItoUCS2("DontShowAgain"), dontShowAgain);
-
-            PRBool outCheckValue = PR_TRUE;
-            dialog->AlertCheck(mWindow, 
-                               windowTitle.GetUnicode(), 
-                               message.GetUnicode(), 
-                               dontShowAgain.GetUnicode(), 
-                               &outCheckValue);
-
-            if (!outCheckValue)
-            {
-                mPref->SetBoolPref(ENTER_SITE_PREF, PR_FALSE);
-                NS_WITH_SERVICE(nsIPSMComponent, psm, PSM_COMPONENT_PROGID, &res);
-                if (NS_FAILED(res)) 
-                    return res;
-                psm->PassPrefs();
-            }
-        }
-    }
-
-    mIsSecureDocument = isNewSchemeSecure;
-    return NS_OK;
-}
-
-
-nsresult
-nsSecureBrowserUIImpl::CheckMixedContext(nsIURI* nextURI)
-{
-    PRBool secure;
-
-    nsresult rv = IsURLHTTPS(nextURI, &secure);
-    if (NS_FAILED(rv))
-        return rv;
-
-    if (!secure  && mIsSecureDocument)
-    {
-        mIsDocumentBroken = PR_TRUE;
-        mSecurityButton->SetAttribute( NS_ConvertASCIItoUCS2("level"), NS_ConvertASCIItoUCS2("broken") );
-
-        if (!mPref) return NS_ERROR_NULL_POINTER;
-
-        PRBool boolpref;
-        if ((mPref->GetBoolPref(MIXEDCONTENT_PREF, &boolpref) != 0))
-            boolpref = PR_TRUE;
-
-        if (boolpref && !mMixContentAlertShown) 
-        {
-            NS_WITH_SERVICE(nsICommonDialogs, dialog, kCommonDialogsCID, &rv);
-            if (NS_FAILED(rv)) 
-                return rv;
-
-            nsAutoString windowTitle, message, dontShowAgain;
-
-            GetBundleString(NS_ConvertASCIItoUCS2("Title"), windowTitle);
-            GetBundleString(NS_ConvertASCIItoUCS2("MixedContentMessage"), message);
-            GetBundleString(NS_ConvertASCIItoUCS2("DontShowAgain"), dontShowAgain);
-
-            PRBool outCheckValue = PR_TRUE;
-
-            dialog->AlertCheck(mWindow, 
-                               windowTitle.GetUnicode(), 
-                               message.GetUnicode(), 
-                               dontShowAgain.GetUnicode(), 
-                               &outCheckValue);
-
-            if (!outCheckValue) {
-                mPref->SetBoolPref(MIXEDCONTENT_PREF, PR_FALSE);
-                NS_WITH_SERVICE(nsIPSMComponent, psm, PSM_COMPONENT_PROGID, &rv);
-                if (NS_FAILED(rv)) 
-                    return rv;
-                psm->PassPrefs();
-            }
-
-            mMixContentAlertShown = PR_TRUE;
-        }
-    }
-
-  return NS_OK;
-}
-
-nsresult
-nsSecureBrowserUIImpl::CheckPost(nsIURI *actionURL, PRBool *okayToPost)
-{
-    PRBool secure;
-
-    nsresult rv = IsURLHTTPS(actionURL, &secure);
-    if (NS_FAILED(rv))
-        return rv;
-    
-    // if we are posting to a secure link from a secure page, all is okay.
-    if (secure  && mIsSecureDocument)
-        return NS_OK;
-
-
-    PRBool boolpref;    
-
-    // posting to a non https URL.
-    if ((mPref->GetBoolPref(INSECURE_SUBMIT_PREF, &boolpref) != 0))
-        boolpref = PR_TRUE;
-    
-    if (boolpref) {
-        NS_WITH_SERVICE(nsICommonDialogs, dialog, kCommonDialogsCID, &rv);
-        if (NS_FAILED(rv)) 
-            return rv;
-
-        nsAutoString windowTitle, message, dontShowAgain;
-        
-        GetBundleString(NS_ConvertASCIItoUCS2("Title"), windowTitle);
-        GetBundleString(NS_ConvertASCIItoUCS2("DontShowAgain"), dontShowAgain);
-
-        // posting to insecure webpage from a secure webpage.
-        if (!secure  && mIsSecureDocument && !mIsDocumentBroken) {
-            GetBundleString(NS_ConvertASCIItoUCS2("PostToInsecure"), message);
-        } else { // anything else, post generic warning
-            GetBundleString(NS_ConvertASCIItoUCS2("PostToInsecureFromInsecure"), message);
-        }
-
-        PRBool outCheckValue = PR_TRUE;
-        dialog->ConfirmCheck(mWindow, 
-                             windowTitle.GetUnicode(), 
-                             message.GetUnicode(), 
-                             dontShowAgain.GetUnicode(), 
-                             &outCheckValue, 
-                             okayToPost);
-
-        if (!outCheckValue) {
-            mPref->SetBoolPref(INSECURE_SUBMIT_PREF, PR_FALSE);
-            NS_WITH_SERVICE(nsIPSMComponent, psm, PSM_COMPONENT_PROGID, &rv);
-            if (NS_FAILED(rv)) 
-                return rv;
-            psm->PassPrefs();
-        }
-    } else {
-        *okayToPost = PR_TRUE;
-    }
-  
-    return NS_OK;
-}

mozilla/extensions/psm-glue/src/nsSecureBrowserUIImpl.h

@@ -1,108 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
- *
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation.  Portions created by Netscape are
- * Copyright (C) 1998 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):
- *   Hubbie Shaw
- *   Doug Turner <dougt@netscape.com>
-*/
-
-#ifndef nsSecureBrowserUIImpl_h_
-#define nsSecureBrowserUIImpl_h_
-
-#include "nsCOMPtr.h"
-#include "nsXPIDLString.h"
-#include "nsString.h"
-#include "nsIObserver.h"
-#include "nsIDocumentLoaderObserver.h"
-#include "nsIDOMElement.h"
-#include "nsIDOMWindow.h"
-#include "nsIStringBundle.h"
-#include "nsISecureBrowserUI.h"
-#include "nsIDocShell.h"
-#include "nsIPref.h"
-#include "nsIWebProgressListener.h"
-#include "nsIFormSubmitObserver.h"
-#include "nsIURI.h"
-
-#define NS_SECURE_BROWSER_DOCOBSERVER_CLASSNAME "Mozilla Secure Browser Doc Observer"
-
-#define NS_SECURE_BROWSER_DOCOBSERVER_CID \
-{0x97c06c30, 0xa145, 0x11d3, \
-{0x8c, 0x7c, 0x00, 0x60, 0x97, 0x92, 0x27, 0x8c}}
-
-#define NS_SECURE_BROWSER_DOCOBSERVER_PROGID "component://netscape/secure_browser_docobserver"
-
-
-class nsSecureBrowserUIImpl : public nsSecureBrowserUI, 
-                              public nsIWebProgressListener, 
-                              public nsIFormSubmitObserver,
-                              public nsIObserver
-{
-public:
-
-	nsSecureBrowserUIImpl();
-	virtual ~nsSecureBrowserUIImpl();
-    
-    static NS_METHOD Create(nsISupports *aOuter, REFNSIID aIID, void **aResult);
-
-	NS_DECL_ISUPPORTS    
-    NS_DECL_NSIWEBPROGRESSLISTENER
-    NS_DECL_NSSECUREBROWSERUI
-
-
-    // nsIObserver
-    NS_DECL_NSIOBSERVER
-    NS_IMETHOD Notify(nsIContent* formNode, nsIDOMWindow* window, nsIURI *actionURL);
-
-protected:
-
-	nsCOMPtr<nsIDOMWindow>              mWindow;
-    nsCOMPtr<nsIDOMElement>             mSecurityButton;
-	nsCOMPtr<nsIDocumentLoaderObserver> mOldWebShellObserver;
-    nsCOMPtr<nsIPref>                   mPref;
-    nsCOMPtr<nsIStringBundle>           mStringBundle;
-    
-    nsCOMPtr<nsIURI>                    mCurrentURI;
-
-	PRBool					mIsSecureDocument;  // is https loaded
-	PRBool					mIsDocumentBroken;  // 
-	PRBool					mMixContentAlertShown;
-    
-    PRBool                  mInitByLocationChange;
-
-    char*                   mLastPSMStatus;
-    
-
-    void GetBundleString(const nsString& name, nsString &outString);
-    nsresult LoadStringBundle();
-    
-    nsresult CheckProtocolContextSwitch( nsIURI* newURI, nsIURI* oldURI);
-    nsresult CheckMixedContext(nsIURI* nextURI);
-    nsresult CheckPost(nsIURI *actionURL, PRBool *okayToPost);
-    nsresult IsURLHTTPS(nsIURI* aURL, PRBool *value);
-};
-
-
-#endif /* nsSecureBrowserUIImpl_h_ */
-
-
-
-
-
-

mozilla/jpeg/MANIFEST

@@ -0,0 +1,11 @@
+#
+# This is a list of local files which get copied to the mozilla:dist directory
+#
+
+jconfig.h
+jerror.h
+jinclude.h
+jmorecfg.h
+jpeglib.h
+jpegint.h
+jconfig-mac-cw.h

mozilla/jpeg/Makefile.in

@@ -0,0 +1,110 @@
+#
+# The contents of this file are subject to the Netscape Public License
+# Version 1.0 (the "NPL"); you may not use this file except in
+# compliance with the NPL.  You may obtain a copy of the NPL at
+# http://www.mozilla.org/NPL/
+#
+# Software distributed under the NPL is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+# for the specific language governing rights and limitations under the
+# NPL.
+#
+# The Initial Developer of this code under the NPL is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+# Reserved.
+#
+
+DEPTH		= ..
+topsrcdir	= @top_srcdir@
+srcdir		= @srcdir@
+VPATH		= @srcdir@
+
+include $(DEPTH)/config/autoconf.mk
+
+MODULE		= jpeg
+LIBRARY_NAME	= jpeg
+
+REQUIRES	= java
+
+CSRCS		= \
+		jdapimin.c \
+		jdapistd.c \
+		jdatasrc.c \
+		jdatadst.c \
+		jdmaster.c \
+		jdinput.c \
+		jdmarker.c \
+		jdhuff.c \
+		jdphuff.c \
+		jdmainct.c \
+		jdcoefct.c \
+		jdpostct.c \
+		jddctmgr.c \
+		jidctfst.c \
+		jidctflt.c \
+		jidctint.c \
+		jdsample.c \
+		jdcolor.c \
+		jquant1.c \
+		jquant2.c \
+		jdmerge.c \
+		jcomapi.c \
+		jutils.c \
+		jerror.c \
+		jmemmgr.c \
+		jmemnobs.c \
+		jfdctflt.c \
+		jfdctfst.c \
+		jfdctint.c \
+		$(NULL)
+
+EXPORTS		= \
+		jconfig.h \
+		jerror.h \
+		jinclude.h \
+		jmorecfg.h \
+		jpeglib.h \
+		jpegint.h \
+		jwinfig.h \
+		jos2fig.h \
+		$(NULL)
+
+EXPORTS		:= $(addprefix $(srcdir)/, $(EXPORTS))
+
+ifeq ($(subst /,_,$(shell uname -s)),OS2)
+CSRCS		+= \
+		jcapimin.c \
+		jcparam.c \
+		jcapistd.c \
+		jcmarker.c \
+		jcinit.c \
+		jcmainct.c \
+		jchuff.c \
+		jcsample.c \
+		jcmaster.c \
+		jccoefct.c \
+		jccolor.c \
+		jcphuff.c \
+		jcdctmgr.c \
+		jcprepct.c \
+		$(NULL)
+
+OS2_IMPLIB	= 1
+LIBRARY		= $(LIBRARY_NAME)$(MOZ_BITS)$(VERSION_NUMBER).$(LIB_SUFFIX)
+DEF_FILE	= $(LIBRARY_NAME).def
+TARGETS		= $(LIBRARY)
+endif
+
+DEFINES += -DHAVE_MMX_INTEL_MNEMONICS
+# need static lib for some of the libimg componentry to link properly
+override NO_STATIC_LIB=
+
+jdapimin.s: jdapimin.c
+	$(CC) -S jdapimin.c $(LIBS_DIR) $(LIBS) $(OS_LIBS) $(DEFINES) $(INCLUDES)
+
+jdapimin.o: jdapimin.s
+	as jdapimin.s
+
+include $(topsrcdir)/config/rules.mk
+

mozilla/jpeg/README

@@ -0,0 +1,385 @@
+The Independent JPEG Group's JPEG software
+==========================================
+
+README for release 6b of 27-Mar-1998
+====================================
+
+This distribution contains the sixth public release of the Independent JPEG
+Group's free JPEG software.  You are welcome to redistribute this software and
+to use it for any purpose, subject to the conditions under LEGAL ISSUES, below.
+
+Serious users of this software (particularly those incorporating it into
+larger programs) should contact IJG at jpeg-info@uunet.uu.net to be added to
+our electronic mailing list.  Mailing list members are notified of updates
+and have a chance to participate in technical discussions, etc.
+
+This software is the work of Tom Lane, Philip Gladstone, Jim Boucher,
+Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi,
+Guido Vollbeding, Ge' Weijers, and other members of the Independent JPEG
+Group.
+
+IJG is not affiliated with the official ISO JPEG standards committee.
+
+
+DOCUMENTATION ROADMAP
+=====================
+
+This file contains the following sections:
+
+OVERVIEW            General description of JPEG and the IJG software.
+LEGAL ISSUES        Copyright, lack of warranty, terms of distribution.
+REFERENCES          Where to learn more about JPEG.
+ARCHIVE LOCATIONS   Where to find newer versions of this software.
+RELATED SOFTWARE    Other stuff you should get.
+FILE FORMAT WARS    Software *not* to get.
+TO DO               Plans for future IJG releases.
+
+Other documentation files in the distribution are:
+
+User documentation:
+  install.doc       How to configure and install the IJG software.
+  usage.doc         Usage instructions for cjpeg, djpeg, jpegtran,
+                    rdjpgcom, and wrjpgcom.
+  *.1               Unix-style man pages for programs (same info as usage.doc).
+  wizard.doc        Advanced usage instructions for JPEG wizards only.
+  change.log        Version-to-version change highlights.
+Programmer and internal documentation:
+  libjpeg.doc       How to use the JPEG library in your own programs.
+  example.c         Sample code for calling the JPEG library.
+  structure.doc     Overview of the JPEG library's internal structure.
+  filelist.doc      Road map of IJG files.
+  coderules.doc     Coding style rules --- please read if you contribute code.
+
+Please read at least the files install.doc and usage.doc.  Useful information
+can also be found in the JPEG FAQ (Frequently Asked Questions) article.  See
+ARCHIVE LOCATIONS below to find out where to obtain the FAQ article.
+
+If you want to understand how the JPEG code works, we suggest reading one or
+more of the REFERENCES, then looking at the documentation files (in roughly
+the order listed) before diving into the code.
+
+
+OVERVIEW
+========
+
+This package contains C software to implement JPEG image compression and
+decompression.  JPEG (pronounced "jay-peg") is a standardized compression
+method for full-color and gray-scale images.  JPEG is intended for compressing
+"real-world" scenes; line drawings, cartoons and other non-realistic images
+are not its strong suit.  JPEG is lossy, meaning that the output image is not
+exactly identical to the input image.  Hence you must not use JPEG if you
+have to have identical output bits.  However, on typical photographic images,
+very good compression levels can be obtained with no visible change, and
+remarkably high compression levels are possible if you can tolerate a
+low-quality image.  For more details, see the references, or just experiment
+with various compression settings.
+
+This software implements JPEG baseline, extended-sequential, and progressive
+compression processes.  Provision is made for supporting all variants of these
+processes, although some uncommon parameter settings aren't implemented yet.
+For legal reasons, we are not distributing code for the arithmetic-coding
+variants of JPEG; see LEGAL ISSUES.  We have made no provision for supporting
+the hierarchical or lossless processes defined in the standard.
+
+We provide a set of library routines for reading and writing JPEG image files,
+plus two sample applications "cjpeg" and "djpeg", which use the library to
+perform conversion between JPEG and some other popular image file formats.
+The library is intended to be reused in other applications.
+
+In order to support file conversion and viewing software, we have included
+considerable functionality beyond the bare JPEG coding/decoding capability;
+for example, the color quantization modules are not strictly part of JPEG
+decoding, but they are essential for output to colormapped file formats or
+colormapped displays.  These extra functions can be compiled out of the
+library if not required for a particular application.  We have also included
+"jpegtran", a utility for lossless transcoding between different JPEG
+processes, and "rdjpgcom" and "wrjpgcom", two simple applications for
+inserting and extracting textual comments in JFIF files.
+
+The emphasis in designing this software has been on achieving portability and
+flexibility, while also making it fast enough to be useful.  In particular,
+the software is not intended to be read as a tutorial on JPEG.  (See the
+REFERENCES section for introductory material.)  Rather, it is intended to
+be reliable, portable, industrial-strength code.  We do not claim to have
+achieved that goal in every aspect of the software, but we strive for it.
+
+We welcome the use of this software as a component of commercial products.
+No royalty is required, but we do ask for an acknowledgement in product
+documentation, as described under LEGAL ISSUES.
+
+
+LEGAL ISSUES
+============
+
+In plain English:
+
+1. We don't promise that this software works.  (But if you find any bugs,
+   please let us know!)
+2. You can use this software for whatever you want.  You don't have to pay us.
+3. You may not pretend that you wrote this software.  If you use it in a
+   program, you must acknowledge somewhere in your documentation that
+   you've used the IJG code.
+
+In legalese:
+
+The authors make NO WARRANTY or representation, either express or implied,
+with respect to this software, its quality, accuracy, merchantability, or
+fitness for a particular purpose.  This software is provided "AS IS", and you,
+its user, assume the entire risk as to its quality and accuracy.
+
+This software is copyright (C) 1991-1998, Thomas G. Lane.
+All Rights Reserved except as specified below.
+
+Permission is hereby granted to use, copy, modify, and distribute this
+software (or portions thereof) for any purpose, without fee, subject to these
+conditions:
+(1) If any part of the source code for this software is distributed, then this
+README file must be included, with this copyright and no-warranty notice
+unaltered; and any additions, deletions, or changes to the original files
+must be clearly indicated in accompanying documentation.
+(2) If only executable code is distributed, then the accompanying
+documentation must state that "this software is based in part on the work of
+the Independent JPEG Group".
+(3) Permission for use of this software is granted only if the user accepts
+full responsibility for any undesirable consequences; the authors accept
+NO LIABILITY for damages of any kind.
+
+These conditions apply to any software derived from or based on the IJG code,
+not just to the unmodified library.  If you use our work, you ought to
+acknowledge us.
+
+Permission is NOT granted for the use of any IJG author's name or company name
+in advertising or publicity relating to this software or products derived from
+it.  This software may be referred to only as "the Independent JPEG Group's
+software".
+
+We specifically permit and encourage the use of this software as the basis of
+commercial products, provided that all warranty or liability claims are
+assumed by the product vendor.
+
+
+ansi2knr.c is included in this distribution by permission of L. Peter Deutsch,
+sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA.
+ansi2knr.c is NOT covered by the above copyright and conditions, but instead
+by the usual distribution terms of the Free Software Foundation; principally,
+that you must include source code if you redistribute it.  (See the file
+ansi2knr.c for full details.)  However, since ansi2knr.c is not needed as part
+of any program generated from the IJG code, this does not limit you more than
+the foregoing paragraphs do.
+
+The Unix configuration script "configure" was produced with GNU Autoconf.
+It is copyright by the Free Software Foundation but is freely distributable.
+The same holds for its supporting scripts (config.guess, config.sub,
+ltconfig, ltmain.sh).  Another support script, install-sh, is copyright
+by M.I.T. but is also freely distributable.
+
+It appears that the arithmetic coding option of the JPEG spec is covered by
+patents owned by IBM, AT&T, and Mitsubishi.  Hence arithmetic coding cannot
+legally be used without obtaining one or more licenses.  For this reason,
+support for arithmetic coding has been removed from the free JPEG software.
+(Since arithmetic coding provides only a marginal gain over the unpatented
+Huffman mode, it is unlikely that very many implementations will support it.)
+So far as we are aware, there are no patent restrictions on the remaining
+code.
+
+The IJG distribution formerly included code to read and write GIF files.
+To avoid entanglement with the Unisys LZW patent, GIF reading support has
+been removed altogether, and the GIF writer has been simplified to produce
+"uncompressed GIFs".  This technique does not use the LZW algorithm; the
+resulting GIF files are larger than usual, but are readable by all standard
+GIF decoders.
+
+We are required to state that
+    "The Graphics Interchange Format(c) is the Copyright property of
+    CompuServe Incorporated.  GIF(sm) is a Service Mark property of
+    CompuServe Incorporated."
+
+
+REFERENCES
+==========
+
+We highly recommend reading one or more of these references before trying to
+understand the innards of the JPEG software.
+
+The best short technical introduction to the JPEG compression algorithm is
+	Wallace, Gregory K.  "The JPEG Still Picture Compression Standard",
+	Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.
+(Adjacent articles in that issue discuss MPEG motion picture compression,
+applications of JPEG, and related topics.)  If you don't have the CACM issue
+handy, a PostScript file containing a revised version of Wallace's article is
+available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz.  The file (actually
+a preprint for an article that appeared in IEEE Trans. Consumer Electronics)
+omits the sample images that appeared in CACM, but it includes corrections
+and some added material.  Note: the Wallace article is copyright ACM and IEEE,
+and it may not be used for commercial purposes.
+
+A somewhat less technical, more leisurely introduction to JPEG can be found in
+"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by
+M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1.  This book provides
+good explanations and example C code for a multitude of compression methods
+including JPEG.  It is an excellent source if you are comfortable reading C
+code but don't know much about data compression in general.  The book's JPEG
+sample code is far from industrial-strength, but when you are ready to look
+at a full implementation, you've got one here...
+
+The best full description of JPEG is the textbook "JPEG Still Image Data
+Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published
+by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1.  Price US$59.95, 638 pp.
+The book includes the complete text of the ISO JPEG standards (DIS 10918-1
+and draft DIS 10918-2).  This is by far the most complete exposition of JPEG
+in existence, and we highly recommend it.
+
+The JPEG standard itself is not available electronically; you must order a
+paper copy through ISO or ITU.  (Unless you feel a need to own a certified
+official copy, we recommend buying the Pennebaker and Mitchell book instead;
+it's much cheaper and includes a great deal of useful explanatory material.)
+In the USA, copies of the standard may be ordered from ANSI Sales at (212)
+642-4900, or from Global Engineering Documents at (800) 854-7179.  (ANSI
+doesn't take credit card orders, but Global does.)  It's not cheap: as of
+1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7%
+shipping/handling.  The standard is divided into two parts, Part 1 being the
+actual specification, while Part 2 covers compliance testing methods.  Part 1
+is titled "Digital Compression and Coding of Continuous-tone Still Images,
+Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS
+10918-1, ITU-T T.81.  Part 2 is titled "Digital Compression and Coding of
+Continuous-tone Still Images, Part 2: Compliance testing" and has document
+numbers ISO/IEC IS 10918-2, ITU-T T.83.
+
+Some extensions to the original JPEG standard are defined in JPEG Part 3,
+a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84.  IJG
+currently does not support any Part 3 extensions.
+
+The JPEG standard does not specify all details of an interchangeable file
+format.  For the omitted details we follow the "JFIF" conventions, revision
+1.02.  A copy of the JFIF spec is available from:
+	Literature Department
+	C-Cube Microsystems, Inc.
+	1778 McCarthy Blvd.
+	Milpitas, CA 95035
+	phone (408) 944-6300,  fax (408) 944-6314
+A PostScript version of this document is available by FTP at
+ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz.  There is also a plain text
+version at ftp://ftp.uu.net/graphics/jpeg/jfif.txt.gz, but it is missing
+the figures.
+
+The TIFF 6.0 file format specification can be obtained by FTP from
+ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz.  The JPEG incorporation scheme
+found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems.
+IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6).
+Instead, we recommend the JPEG design proposed by TIFF Technical Note #2
+(Compression tag 7).  Copies of this Note can be obtained from ftp.sgi.com or
+from ftp://ftp.uu.net/graphics/jpeg/.  It is expected that the next revision
+of the TIFF spec will replace the 6.0 JPEG design with the Note's design.
+Although IJG's own code does not support TIFF/JPEG, the free libtiff library
+uses our library to implement TIFF/JPEG per the Note.  libtiff is available
+from ftp://ftp.sgi.com/graphics/tiff/.
+
+
+ARCHIVE LOCATIONS
+=================
+
+The "official" archive site for this software is ftp.uu.net (Internet
+address 192.48.96.9).  The most recent released version can always be found
+there in directory graphics/jpeg.  This particular version will be archived
+as ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz.  If you don't have
+direct Internet access, UUNET's archives are also available via UUCP; contact
+help@uunet.uu.net for information on retrieving files that way.
+
+Numerous Internet sites maintain copies of the UUNET files.  However, only
+ftp.uu.net is guaranteed to have the latest official version.
+
+You can also obtain this software in DOS-compatible "zip" archive format from
+the SimTel archives (ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics/), or
+on CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library 12
+"JPEG Tools".  Again, these versions may sometimes lag behind the ftp.uu.net
+release.
+
+The JPEG FAQ (Frequently Asked Questions) article is a useful source of
+general information about JPEG.  It is updated constantly and therefore is
+not included in this distribution.  The FAQ is posted every two weeks to
+Usenet newsgroups comp.graphics.misc, news.answers, and other groups.
+It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/
+and other news.answers archive sites, including the official news.answers
+archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/.
+If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu
+with body
+	send usenet/news.answers/jpeg-faq/part1
+	send usenet/news.answers/jpeg-faq/part2
+
+
+RELATED SOFTWARE
+================
+
+Numerous viewing and image manipulation programs now support JPEG.  (Quite a
+few of them use this library to do so.)  The JPEG FAQ described above lists
+some of the more popular free and shareware viewers, and tells where to
+obtain them on Internet.
+
+If you are on a Unix machine, we highly recommend Jef Poskanzer's free
+PBMPLUS software, which provides many useful operations on PPM-format image
+files.  In particular, it can convert PPM images to and from a wide range of
+other formats, thus making cjpeg/djpeg considerably more useful.  The latest
+version is distributed by the NetPBM group, and is available from numerous
+sites, notably ftp://wuarchive.wustl.edu/graphics/graphics/packages/NetPBM/.
+Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software is;
+you are likely to have difficulty making it work on any non-Unix machine.
+
+A different free JPEG implementation, written by the PVRG group at Stanford,
+is available from ftp://havefun.stanford.edu/pub/jpeg/.  This program
+is designed for research and experimentation rather than production use;
+it is slower, harder to use, and less portable than the IJG code, but it
+is easier to read and modify.  Also, the PVRG code supports lossless JPEG,
+which we do not.  (On the other hand, it doesn't do progressive JPEG.)
+
+
+FILE FORMAT WARS
+================
+
+Some JPEG programs produce files that are not compatible with our library.
+The root of the problem is that the ISO JPEG committee failed to specify a
+concrete file format.  Some vendors "filled in the blanks" on their own,
+creating proprietary formats that no one else could read.  (For example, none
+of the early commercial JPEG implementations for the Macintosh were able to
+exchange compressed files.)
+
+The file format we have adopted is called JFIF (see REFERENCES).  This format
+has been agreed to by a number of major commercial JPEG vendors, and it has
+become the de facto standard.  JFIF is a minimal or "low end" representation.
+We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF
+Technical Note #2) for "high end" applications that need to record a lot of
+additional data about an image.  TIFF/JPEG is fairly new and not yet widely
+supported, unfortunately.
+
+The upcoming JPEG Part 3 standard defines a file format called SPIFF.
+SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should
+be able to read the most common variant of SPIFF.  SPIFF has some technical
+advantages over JFIF, but its major claim to fame is simply that it is an
+official standard rather than an informal one.  At this point it is unclear
+whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto
+standard.  IJG intends to support SPIFF once the standard is frozen, but we
+have not decided whether it should become our default output format or not.
+(In any case, our decoder will remain capable of reading JFIF indefinitely.)
+
+Various proprietary file formats incorporating JPEG compression also exist.
+We have little or no sympathy for the existence of these formats.  Indeed,
+one of the original reasons for developing this free software was to help
+force convergence on common, open format standards for JPEG files.  Don't
+use a proprietary file format!
+
+
+TO DO
+=====
+
+The major thrust for v7 will probably be improvement of visual quality.
+The current method for scaling the quantization tables is known not to be
+very good at low Q values.  We also intend to investigate block boundary
+smoothing, "poor man's variable quantization", and other means of improving
+quality-vs-file-size performance without sacrificing compatibility.
+
+In future versions, we are considering supporting some of the upcoming JPEG
+Part 3 extensions --- principally, variable quantization and the SPIFF file
+format.
+
+As always, speeding things up is of great interest.
+
+Please send bug reports, offers of help, etc. to jpeg-info@uunet.uu.net.

mozilla/jpeg/cderror.h

@@ -0,0 +1,132 @@
+/*
+ * cderror.h
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file defines the error and message codes for the cjpeg/djpeg
+ * applications.  These strings are not needed as part of the JPEG library
+ * proper.
+ * Edit this file to add new codes, or to translate the message strings to
+ * some other language.
+ */
+
+/*
+ * To define the enum list of message codes, include this file without
+ * defining macro JMESSAGE.  To create a message string table, include it
+ * again with a suitable JMESSAGE definition (see jerror.c for an example).
+ */
+#ifndef JMESSAGE
+#ifndef CDERROR_H
+#define CDERROR_H
+/* First time through, define the enum list */
+#define JMAKE_ENUM_LIST
+#else
+/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */
+#define JMESSAGE(code,string)
+#endif /* CDERROR_H */
+#endif /* JMESSAGE */
+
+#ifdef JMAKE_ENUM_LIST
+
+typedef enum {
+
+#define JMESSAGE(code,string)	code ,
+
+#endif /* JMAKE_ENUM_LIST */
+
+JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */
+
+#ifdef BMP_SUPPORTED
+JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format")
+JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported")
+JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length")
+JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1")
+JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB")
+JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported")
+JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM")
+JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image")
+JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image")
+JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image")
+JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image")
+#endif /* BMP_SUPPORTED */
+
+#ifdef GIF_SUPPORTED
+JMESSAGE(JERR_GIF_BUG, "GIF output got confused")
+JMESSAGE(JERR_GIF_CODESIZE, "Bogus GIF codesize %d")
+JMESSAGE(JERR_GIF_COLORSPACE, "GIF output must be grayscale or RGB")
+JMESSAGE(JERR_GIF_IMAGENOTFOUND, "Too few images in GIF file")
+JMESSAGE(JERR_GIF_NOT, "Not a GIF file")
+JMESSAGE(JTRC_GIF, "%ux%ux%d GIF image")
+JMESSAGE(JTRC_GIF_BADVERSION,
+	 "Warning: unexpected GIF version number '%c%c%c'")
+JMESSAGE(JTRC_GIF_EXTENSION, "Ignoring GIF extension block of type 0x%02x")
+JMESSAGE(JTRC_GIF_NONSQUARE, "Caution: nonsquare pixels in input")
+JMESSAGE(JWRN_GIF_BADDATA, "Corrupt data in GIF file")
+JMESSAGE(JWRN_GIF_CHAR, "Bogus char 0x%02x in GIF file, ignoring")
+JMESSAGE(JWRN_GIF_ENDCODE, "Premature end of GIF image")
+JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits")
+#endif /* GIF_SUPPORTED */
+
+#ifdef PPM_SUPPORTED
+JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB")
+JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file")
+JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file")
+JMESSAGE(JTRC_PGM, "%ux%u PGM image")
+JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image")
+JMESSAGE(JTRC_PPM, "%ux%u PPM image")
+JMESSAGE(JTRC_PPM_TEXT, "%ux%u text PPM image")
+#endif /* PPM_SUPPORTED */
+
+#ifdef RLE_SUPPORTED
+JMESSAGE(JERR_RLE_BADERROR, "Bogus error code from RLE library")
+JMESSAGE(JERR_RLE_COLORSPACE, "RLE output must be grayscale or RGB")
+JMESSAGE(JERR_RLE_DIMENSIONS, "Image dimensions (%ux%u) too large for RLE")
+JMESSAGE(JERR_RLE_EMPTY, "Empty RLE file")
+JMESSAGE(JERR_RLE_EOF, "Premature EOF in RLE header")
+JMESSAGE(JERR_RLE_MEM, "Insufficient memory for RLE header")
+JMESSAGE(JERR_RLE_NOT, "Not an RLE file")
+JMESSAGE(JERR_RLE_TOOMANYCHANNELS, "Cannot handle %d output channels for RLE")
+JMESSAGE(JERR_RLE_UNSUPPORTED, "Cannot handle this RLE setup")
+JMESSAGE(JTRC_RLE, "%ux%u full-color RLE file")
+JMESSAGE(JTRC_RLE_FULLMAP, "%ux%u full-color RLE file with map of length %d")
+JMESSAGE(JTRC_RLE_GRAY, "%ux%u grayscale RLE file")
+JMESSAGE(JTRC_RLE_MAPGRAY, "%ux%u grayscale RLE file with map of length %d")
+JMESSAGE(JTRC_RLE_MAPPED, "%ux%u colormapped RLE file with map of length %d")
+#endif /* RLE_SUPPORTED */
+
+#ifdef TARGA_SUPPORTED
+JMESSAGE(JERR_TGA_BADCMAP, "Unsupported Targa colormap format")
+JMESSAGE(JERR_TGA_BADPARMS, "Invalid or unsupported Targa file")
+JMESSAGE(JERR_TGA_COLORSPACE, "Targa output must be grayscale or RGB")
+JMESSAGE(JTRC_TGA, "%ux%u RGB Targa image")
+JMESSAGE(JTRC_TGA_GRAY, "%ux%u grayscale Targa image")
+JMESSAGE(JTRC_TGA_MAPPED, "%ux%u colormapped Targa image")
+#else
+JMESSAGE(JERR_TGA_NOTCOMP, "Targa support was not compiled")
+#endif /* TARGA_SUPPORTED */
+
+JMESSAGE(JERR_BAD_CMAP_FILE,
+	 "Color map file is invalid or of unsupported format")
+JMESSAGE(JERR_TOO_MANY_COLORS,
+	 "Output file format cannot handle %d colormap entries")
+JMESSAGE(JERR_UNGETC_FAILED, "ungetc failed")
+#ifdef TARGA_SUPPORTED
+JMESSAGE(JERR_UNKNOWN_FORMAT,
+	 "Unrecognized input file format --- perhaps you need -targa")
+#else
+JMESSAGE(JERR_UNKNOWN_FORMAT, "Unrecognized input file format")
+#endif
+JMESSAGE(JERR_UNSUPPORTED_FORMAT, "Unsupported output file format")
+
+#ifdef JMAKE_ENUM_LIST
+
+  JMSG_LASTADDONCODE
+} ADDON_MESSAGE_CODE;
+
+#undef JMAKE_ENUM_LIST
+#endif /* JMAKE_ENUM_LIST */
+
+/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */
+#undef JMESSAGE

mozilla/jpeg/cdjpeg.c

@@ -0,0 +1,181 @@
+/*
+ * cdjpeg.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains common support routines used by the IJG application
+ * programs (cjpeg, djpeg, jpegtran).
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include <ctype.h>		/* to declare isupper(), tolower() */
+#ifdef NEED_SIGNAL_CATCHER
+#include <signal.h>		/* to declare signal() */
+#endif
+#ifdef USE_SETMODE
+#include <fcntl.h>		/* to declare setmode()'s parameter macros */
+/* If you have setmode() but not <io.h>, just delete this line: */
+#include <io.h>			/* to declare setmode() */
+#endif
+
+
+/*
+ * Signal catcher to ensure that temporary files are removed before aborting.
+ * NB: for Amiga Manx C this is actually a global routine named _abort();
+ * we put "#define signal_catcher _abort" in jconfig.h.  Talk about bogus...
+ */
+
+#ifdef NEED_SIGNAL_CATCHER
+
+static j_common_ptr sig_cinfo;
+
+void				/* must be global for Manx C */
+signal_catcher (int signum)
+{
+  if (sig_cinfo != NULL) {
+    if (sig_cinfo->err != NULL) /* turn off trace output */
+      sig_cinfo->err->trace_level = 0;
+    jpeg_destroy(sig_cinfo);	/* clean up memory allocation & temp files */
+  }
+  exit(EXIT_FAILURE);
+}
+
+
+GLOBAL(void)
+enable_signal_catcher (j_common_ptr cinfo)
+{
+  sig_cinfo = cinfo;
+#ifdef SIGINT			/* not all systems have SIGINT */
+  signal(SIGINT, signal_catcher);
+#endif
+#ifdef SIGTERM			/* not all systems have SIGTERM */
+  signal(SIGTERM, signal_catcher);
+#endif
+}
+
+#endif
+
+
+/*
+ * Optional progress monitor: display a percent-done figure on stderr.
+ */
+
+#ifdef PROGRESS_REPORT
+
+METHODDEF(void)
+progress_monitor (j_common_ptr cinfo)
+{
+  cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress;
+  int total_passes = prog->pub.total_passes + prog->total_extra_passes;
+  int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit);
+
+  if (percent_done != prog->percent_done) {
+    prog->percent_done = percent_done;
+    if (total_passes > 1) {
+      fprintf(stderr, "\rPass %d/%d: %3d%% ",
+	      prog->pub.completed_passes + prog->completed_extra_passes + 1,
+	      total_passes, percent_done);
+    } else {
+      fprintf(stderr, "\r %3d%% ", percent_done);
+    }
+    fflush(stderr);
+  }
+}
+
+
+GLOBAL(void)
+start_progress_monitor (j_common_ptr cinfo, cd_progress_ptr progress)
+{
+  /* Enable progress display, unless trace output is on */
+  if (cinfo->err->trace_level == 0) {
+    progress->pub.progress_monitor = progress_monitor;
+    progress->completed_extra_passes = 0;
+    progress->total_extra_passes = 0;
+    progress->percent_done = -1;
+    cinfo->progress = &progress->pub;
+  }
+}
+
+
+GLOBAL(void)
+end_progress_monitor (j_common_ptr cinfo)
+{
+  /* Clear away progress display */
+  if (cinfo->err->trace_level == 0) {
+    fprintf(stderr, "\r                \r");
+    fflush(stderr);
+  }
+}
+
+#endif
+
+
+/*
+ * Case-insensitive matching of possibly-abbreviated keyword switches.
+ * keyword is the constant keyword (must be lower case already),
+ * minchars is length of minimum legal abbreviation.
+ */
+
+GLOBAL(boolean)
+keymatch (char * arg, const char * keyword, int minchars)
+{
+  register int ca, ck;
+  register int nmatched = 0;
+
+  while ((ca = *arg++) != '\0') {
+    if ((ck = *keyword++) == '\0')
+      return FALSE;		/* arg longer than keyword, no good */
+    if (isupper(ca))		/* force arg to lcase (assume ck is already) */
+      ca = tolower(ca);
+    if (ca != ck)
+      return FALSE;		/* no good */
+    nmatched++;			/* count matched characters */
+  }
+  /* reached end of argument; fail if it's too short for unique abbrev */
+  if (nmatched < minchars)
+    return FALSE;
+  return TRUE;			/* A-OK */
+}
+
+
+/*
+ * Routines to establish binary I/O mode for stdin and stdout.
+ * Non-Unix systems often require some hacking to get out of text mode.
+ */
+
+GLOBAL(FILE *)
+read_stdin (void)
+{
+  FILE * input_file = stdin;
+
+#ifdef USE_SETMODE		/* need to hack file mode? */
+  setmode(fileno(stdin), O_BINARY);
+#endif
+#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
+  if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
+    fprintf(stderr, "Cannot reopen stdin\n");
+    exit(EXIT_FAILURE);
+  }
+#endif
+  return input_file;
+}
+
+
+GLOBAL(FILE *)
+write_stdout (void)
+{
+  FILE * output_file = stdout;
+
+#ifdef USE_SETMODE		/* need to hack file mode? */
+  setmode(fileno(stdout), O_BINARY);
+#endif
+#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
+  if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) {
+    fprintf(stderr, "Cannot reopen stdout\n");
+    exit(EXIT_FAILURE);
+  }
+#endif
+  return output_file;
+}

mozilla/jpeg/cdjpeg.h

@@ -0,0 +1,184 @@
+/*
+ * cdjpeg.h
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains common declarations for the sample applications
+ * cjpeg and djpeg.  It is NOT used by the core JPEG library.
+ */
+
+#define JPEG_CJPEG_DJPEG	/* define proper options in jconfig.h */
+#define JPEG_INTERNAL_OPTIONS	/* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jerror.h"		/* get library error codes too */
+#include "cderror.h"		/* get application-specific error codes */
+
+
+/*
+ * Object interface for cjpeg's source file decoding modules
+ */
+
+typedef struct cjpeg_source_struct * cjpeg_source_ptr;
+
+struct cjpeg_source_struct {
+  JMETHOD(void, start_input, (j_compress_ptr cinfo,
+			      cjpeg_source_ptr sinfo));
+  JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo,
+				       cjpeg_source_ptr sinfo));
+  JMETHOD(void, finish_input, (j_compress_ptr cinfo,
+			       cjpeg_source_ptr sinfo));
+
+  FILE *input_file;
+
+  JSAMPARRAY buffer;
+  JDIMENSION buffer_height;
+};
+
+
+/*
+ * Object interface for djpeg's output file encoding modules
+ */
+
+typedef struct djpeg_dest_struct * djpeg_dest_ptr;
+
+struct djpeg_dest_struct {
+  /* start_output is called after jpeg_start_decompress finishes.
+   * The color map will be ready at this time, if one is needed.
+   */
+  JMETHOD(void, start_output, (j_decompress_ptr cinfo,
+			       djpeg_dest_ptr dinfo));
+  /* Emit the specified number of pixel rows from the buffer. */
+  JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo,
+				 djpeg_dest_ptr dinfo,
+				 JDIMENSION rows_supplied));
+  /* Finish up at the end of the image. */
+  JMETHOD(void, finish_output, (j_decompress_ptr cinfo,
+				djpeg_dest_ptr dinfo));
+
+  /* Target file spec; filled in by djpeg.c after object is created. */
+  FILE * output_file;
+
+  /* Output pixel-row buffer.  Created by module init or start_output.
+   * Width is cinfo->output_width * cinfo->output_components;
+   * height is buffer_height.
+   */
+  JSAMPARRAY buffer;
+  JDIMENSION buffer_height;
+};
+
+
+/*
+ * cjpeg/djpeg may need to perform extra passes to convert to or from
+ * the source/destination file format.  The JPEG library does not know
+ * about these passes, but we'd like them to be counted by the progress
+ * monitor.  We use an expanded progress monitor object to hold the
+ * additional pass count.
+ */
+
+struct cdjpeg_progress_mgr {
+  struct jpeg_progress_mgr pub;	/* fields known to JPEG library */
+  int completed_extra_passes;	/* extra passes completed */
+  int total_extra_passes;	/* total extra */
+  /* last printed percentage stored here to avoid multiple printouts */
+  int percent_done;
+};
+
+typedef struct cdjpeg_progress_mgr * cd_progress_ptr;
+
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jinit_read_bmp		jIRdBMP
+#define jinit_write_bmp		jIWrBMP
+#define jinit_read_gif		jIRdGIF
+#define jinit_write_gif		jIWrGIF
+#define jinit_read_ppm		jIRdPPM
+#define jinit_write_ppm		jIWrPPM
+#define jinit_read_rle		jIRdRLE
+#define jinit_write_rle		jIWrRLE
+#define jinit_read_targa	jIRdTarga
+#define jinit_write_targa	jIWrTarga
+#define read_quant_tables	RdQTables
+#define read_scan_script	RdScnScript
+#define set_quant_slots		SetQSlots
+#define set_sample_factors	SetSFacts
+#define read_color_map		RdCMap
+#define enable_signal_catcher	EnSigCatcher
+#define start_progress_monitor	StProgMon
+#define end_progress_monitor	EnProgMon
+#define read_stdin		RdStdin
+#define write_stdout		WrStdout
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+/* Module selection routines for I/O modules. */
+
+EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo,
+					    boolean is_os2));
+EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo));
+EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo));
+EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo));
+EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo));
+
+/* cjpeg support routines (in rdswitch.c) */
+
+EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename,
+				    int scale_factor, boolean force_baseline));
+EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename));
+EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg));
+EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg));
+
+/* djpeg support routines (in rdcolmap.c) */
+
+EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile));
+
+/* common support routines (in cdjpeg.c) */
+
+EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo));
+EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo,
+					 cd_progress_ptr progress));
+EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo));
+EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars));
+EXTERN(FILE *) read_stdin JPP((void));
+EXTERN(FILE *) write_stdout JPP((void));
+
+/* miscellaneous useful macros */
+
+#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
+#define READ_BINARY	"r"
+#define WRITE_BINARY	"w"
+#else
+#ifdef VMS			/* VMS is very nonstandard */
+#define READ_BINARY	"rb", "ctx=stm"
+#define WRITE_BINARY	"wb", "ctx=stm"
+#else				/* standard ANSI-compliant case */
+#define READ_BINARY	"rb"
+#define WRITE_BINARY	"wb"
+#endif
+#endif
+
+#ifndef EXIT_FAILURE		/* define exit() codes if not provided */
+#define EXIT_FAILURE  1
+#endif
+#ifndef EXIT_SUCCESS
+#ifdef VMS
+#define EXIT_SUCCESS  1		/* VMS is very nonstandard */
+#else
+#define EXIT_SUCCESS  0
+#endif
+#endif
+#ifndef EXIT_WARNING
+#ifdef VMS
+#define EXIT_WARNING  1		/* VMS is very nonstandard */
+#else
+#define EXIT_WARNING  2
+#endif
+#endif

mozilla/jpeg/change.log

@@ -0,0 +1,217 @@
+CHANGE LOG for Independent JPEG Group's JPEG software
+
+
+Version 6b  27-Mar-1998
+-----------------------
+
+jpegtran has new features for lossless image transformations (rotation
+and flipping) as well as "lossless" reduction to grayscale.
+
+jpegtran now copies comments by default; it has a -copy switch to enable
+copying all APPn blocks as well, or to suppress comments.  (Formerly it
+always suppressed comments and APPn blocks.)  jpegtran now also preserves
+JFIF version and resolution information.
+
+New decompressor library feature: COM and APPn markers found in the input
+file can be saved in memory for later use by the application.  (Before,
+you had to code this up yourself with a custom marker processor.)
+
+There is an unused field "void * client_data" now in compress and decompress
+parameter structs; this may be useful in some applications.
+
+JFIF version number information is now saved by the decoder and accepted by
+the encoder.  jpegtran uses this to copy the source file's version number,
+to ensure "jpegtran -copy all" won't create bogus files that contain JFXX
+extensions but claim to be version 1.01.  Applications that generate their
+own JFXX extension markers also (finally) have a supported way to cause the
+encoder to emit JFIF version number 1.02.
+
+djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather
+than as unknown APP0 markers.
+
+In -verbose mode, djpeg and rdjpgcom will try to print the contents of
+APP12 markers as text.  Some digital cameras store useful text information
+in APP12 markers.
+
+Handling of truncated data streams is more robust: blocks beyond the one in
+which the error occurs will be output as uniform gray, or left unchanged
+if decoding a progressive JPEG.  The appearance no longer depends on the
+Huffman tables being used.
+
+Huffman tables are checked for validity much more carefully than before.
+
+To avoid the Unisys LZW patent, djpeg's GIF output capability has been
+changed to produce "uncompressed GIFs", and cjpeg's GIF input capability
+has been removed altogether.  We're not happy about it either, but there
+seems to be no good alternative.
+
+The configure script now supports building libjpeg as a shared library
+on many flavors of Unix (all the ones that GNU libtool knows how to
+build shared libraries for).  Use "./configure --enable-shared" to
+try this out.
+
+New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio.
+Also, a jconfig file and a build script for Metrowerks CodeWarrior
+on Apple Macintosh.  makefile.dj has been updated for DJGPP v2, and there
+are miscellaneous other minor improvements in the makefiles.
+
+jmemmac.c now knows how to create temporary files following Mac System 7
+conventions.
+
+djpeg's -map switch is now able to read raw-format PPM files reliably.
+
+cjpeg -progressive -restart no longer generates any unnecessary DRI markers.
+
+Multiple calls to jpeg_simple_progression for a single JPEG object
+no longer leak memory.
+
+
+Version 6a  7-Feb-96
+--------------------
+
+Library initialization sequence modified to detect version mismatches
+and struct field packing mismatches between library and calling application.
+This change requires applications to be recompiled, but does not require
+any application source code change.
+
+All routine declarations changed to the style "GLOBAL(type) name ...",
+that is, GLOBAL, LOCAL, METHODDEF, EXTERN are now macros taking the
+routine's return type as an argument.  This makes it possible to add
+Microsoft-style linkage keywords to all the routines by changing just
+these macros.  Note that any application code that was using these macros
+will have to be changed.
+
+DCT coefficient quantization tables are now stored in normal array order
+rather than zigzag order.  Application code that calls jpeg_add_quant_table,
+or otherwise manipulates quantization tables directly, will need to be
+changed.  If you need to make such code work with either older or newer
+versions of the library, a test like "#if JPEG_LIB_VERSION >= 61" is
+recommended.
+
+djpeg's trace capability now dumps DQT tables in natural order, not zigzag
+order.  This allows the trace output to be made into a "-qtables" file
+more easily.
+
+New system-dependent memory manager module for use on Apple Macintosh.
+
+Fix bug in cjpeg's -smooth option: last one or two scanlines would be
+duplicates of the prior line unless the image height mod 16 was 1 or 2.
+
+Repair minor problems in VMS, BCC, MC6 makefiles.
+
+New configure script based on latest GNU Autoconf.
+
+Correct the list of include files needed by MetroWerks C for ccommand().
+
+Numerous small documentation updates.
+
+
+Version 6  2-Aug-95
+-------------------
+
+Progressive JPEG support: library can read and write full progressive JPEG
+files.  A "buffered image" mode supports incremental decoding for on-the-fly
+display of progressive images.  Simply recompiling an existing IJG-v5-based
+decoder with v6 should allow it to read progressive files, though of course
+without any special progressive display.
+
+New "jpegtran" application performs lossless transcoding between different
+JPEG formats; primarily, it can be used to convert baseline to progressive
+JPEG and vice versa.  In support of jpegtran, the library now allows lossless
+reading and writing of JPEG files as DCT coefficient arrays.  This ability
+may be of use in other applications.
+
+Notes for programmers:
+* We changed jpeg_start_decompress() to be able to suspend; this makes all
+decoding modes available to suspending-input applications.  However,
+existing applications that use suspending input will need to be changed
+to check the return value from jpeg_start_decompress().  You don't need to
+do anything if you don't use a suspending data source.
+* We changed the interface to the virtual array routines: access_virt_array
+routines now take a count of the number of rows to access this time.  The
+last parameter to request_virt_array routines is now interpreted as the
+maximum number of rows that may be accessed at once, but not necessarily
+the height of every access.
+
+
+Version 5b  15-Mar-95
+---------------------
+
+Correct bugs with grayscale images having v_samp_factor > 1.
+
+jpeg_write_raw_data() now supports output suspension.
+
+Correct bugs in "configure" script for case of compiling in
+a directory other than the one containing the source files.
+
+Repair bug in jquant1.c: sometimes didn't use as many colors as it could.
+
+Borland C makefile and jconfig file work under either MS-DOS or OS/2.
+
+Miscellaneous improvements to documentation.
+
+
+Version 5a  7-Dec-94
+--------------------
+
+Changed color conversion roundoff behavior so that grayscale values are
+represented exactly.  (This causes test image files to change.)
+
+Make ordered dither use 16x16 instead of 4x4 pattern for a small quality
+improvement.
+
+New configure script based on latest GNU Autoconf.
+Fix configure script to handle CFLAGS correctly.
+Rename *.auto files to *.cfg, so that configure script still works if
+file names have been truncated for DOS.
+
+Fix bug in rdbmp.c: didn't allow for extra data between header and image.
+
+Modify rdppm.c/wrppm.c to handle 2-byte raw PPM/PGM formats for 12-bit data.
+
+Fix several bugs in rdrle.c.
+
+NEED_SHORT_EXTERNAL_NAMES option was broken.
+
+Revise jerror.h/jerror.c for more flexibility in message table.
+
+Repair oversight in jmemname.c NO_MKTEMP case: file could be there
+but unreadable.
+
+
+Version 5  24-Sep-94
+--------------------
+
+Version 5 represents a nearly complete redesign and rewrite of the IJG
+software.  Major user-visible changes include:
+  * Automatic configuration simplifies installation for most Unix systems.
+  * A range of speed vs. image quality tradeoffs are supported.
+    This includes resizing of an image during decompression: scaling down
+    by a factor of 1/2, 1/4, or 1/8 is handled very efficiently.
+  * New programs rdjpgcom and wrjpgcom allow insertion and extraction
+    of text comments in a JPEG file.
+
+The application programmer's interface to the library has changed completely.
+Notable improvements include:
+  * We have eliminated the use of callback routines for handling the
+    uncompressed image data.  The application now sees the library as a
+    set of routines that it calls to read or write image data on a
+    scanline-by-scanline basis.
+  * The application image data is represented in a conventional interleaved-
+    pixel format, rather than as a separate array for each color channel.
+    This can save a copying step in many programs.
+  * The handling of compressed data has been cleaned up: the application can
+    supply routines to source or sink the compressed data.  It is possible to
+    suspend processing on source/sink buffer overrun, although this is not
+    supported in all operating modes.
+  * All static state has been eliminated from the library, so that multiple
+    instances of compression or decompression can be active concurrently.
+  * JPEG abbreviated datastream formats are supported, ie, quantization and
+    Huffman tables can be stored separately from the image data.
+  * And not only that, but the documentation of the library has improved
+    considerably!
+
+
+The last widely used release before the version 5 rewrite was version 4A of
+18-Feb-93.  Change logs before that point have been discarded, since they
+are not of much interest after the rewrite.

mozilla/jpeg/cjpeg.c

@@ -0,0 +1,606 @@
+/*
+ * cjpeg.c
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a command-line user interface for the JPEG compressor.
+ * It should work on any system with Unix- or MS-DOS-style command lines.
+ *
+ * Two different command line styles are permitted, depending on the
+ * compile-time switch TWO_FILE_COMMANDLINE:
+ *	cjpeg [options]  inputfile outputfile
+ *	cjpeg [options]  [inputfile]
+ * In the second style, output is always to standard output, which you'd
+ * normally redirect to a file or pipe to some other program.  Input is
+ * either from a named file or from standard input (typically redirected).
+ * The second style is convenient on Unix but is unhelpful on systems that
+ * don't support pipes.  Also, you MUST use the first style if your system
+ * doesn't do binary I/O to stdin/stdout.
+ * To simplify script writing, the "-outfile" switch is provided.  The syntax
+ *	cjpeg [options]  -outfile outputfile  inputfile
+ * works regardless of which command line style is used.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include "jversion.h"		/* for version message */
+
+#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
+#ifdef __MWERKS__
+#include <SIOUX.h>              /* Metrowerks needs this */
+#include <console.h>		/* ... and this */
+#endif
+#ifdef THINK_C
+#include <console.h>		/* Think declares it here */
+#endif
+#endif
+
+
+/* Create the add-on message string table. */
+
+#define JMESSAGE(code,string)	string ,
+
+static const char * const cdjpeg_message_table[] = {
+#include "cderror.h"
+  NULL
+};
+
+
+/*
+ * This routine determines what format the input file is,
+ * and selects the appropriate input-reading module.
+ *
+ * To determine which family of input formats the file belongs to,
+ * we may look only at the first byte of the file, since C does not
+ * guarantee that more than one character can be pushed back with ungetc.
+ * Looking at additional bytes would require one of these approaches:
+ *     1) assume we can fseek() the input file (fails for piped input);
+ *     2) assume we can push back more than one character (works in
+ *        some C implementations, but unportable);
+ *     3) provide our own buffering (breaks input readers that want to use
+ *        stdio directly, such as the RLE library);
+ * or  4) don't put back the data, and modify the input_init methods to assume
+ *        they start reading after the start of file (also breaks RLE library).
+ * #1 is attractive for MS-DOS but is untenable on Unix.
+ *
+ * The most portable solution for file types that can't be identified by their
+ * first byte is to make the user tell us what they are.  This is also the
+ * only approach for "raw" file types that contain only arbitrary values.
+ * We presently apply this method for Targa files.  Most of the time Targa
+ * files start with 0x00, so we recognize that case.  Potentially, however,
+ * a Targa file could start with any byte value (byte 0 is the length of the
+ * seldom-used ID field), so we provide a switch to force Targa input mode.
+ */
+
+static boolean is_targa;	/* records user -targa switch */
+
+
+LOCAL(cjpeg_source_ptr)
+select_file_type (j_compress_ptr cinfo, FILE * infile)
+{
+  int c;
+
+  if (is_targa) {
+#ifdef TARGA_SUPPORTED
+    return jinit_read_targa(cinfo);
+#else
+    ERREXIT(cinfo, JERR_TGA_NOTCOMP);
+#endif
+  }
+
+  if ((c = getc(infile)) == EOF)
+    ERREXIT(cinfo, JERR_INPUT_EMPTY);
+  if (ungetc(c, infile) == EOF)
+    ERREXIT(cinfo, JERR_UNGETC_FAILED);
+
+  switch (c) {
+#ifdef BMP_SUPPORTED
+  case 'B':
+    return jinit_read_bmp(cinfo);
+#endif
+#ifdef GIF_SUPPORTED
+  case 'G':
+    return jinit_read_gif(cinfo);
+#endif
+#ifdef PPM_SUPPORTED
+  case 'P':
+    return jinit_read_ppm(cinfo);
+#endif
+#ifdef RLE_SUPPORTED
+  case 'R':
+    return jinit_read_rle(cinfo);
+#endif
+#ifdef TARGA_SUPPORTED
+  case 0x00:
+    return jinit_read_targa(cinfo);
+#endif
+  default:
+    ERREXIT(cinfo, JERR_UNKNOWN_FORMAT);
+    break;
+  }
+
+  return NULL;			/* suppress compiler warnings */
+}
+
+
+/*
+ * Argument-parsing code.
+ * The switch parser is designed to be useful with DOS-style command line
+ * syntax, ie, intermixed switches and file names, where only the switches
+ * to the left of a given file name affect processing of that file.
+ * The main program in this file doesn't actually use this capability...
+ */
+
+
+static const char * progname;	/* program name for error messages */
+static char * outfilename;	/* for -outfile switch */
+
+
+LOCAL(void)
+usage (void)
+/* complain about bad command line */
+{
+  fprintf(stderr, "usage: %s [switches] ", progname);
+#ifdef TWO_FILE_COMMANDLINE
+  fprintf(stderr, "inputfile outputfile\n");
+#else
+  fprintf(stderr, "[inputfile]\n");
+#endif
+
+  fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -quality N     Compression quality (0..100; 5-95 is useful range)\n");
+  fprintf(stderr, "  -grayscale     Create monochrome JPEG file\n");
+#ifdef ENTROPY_OPT_SUPPORTED
+  fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
+#endif
+#ifdef C_PROGRESSIVE_SUPPORTED
+  fprintf(stderr, "  -progressive   Create progressive JPEG file\n");
+#endif
+#ifdef TARGA_SUPPORTED
+  fprintf(stderr, "  -targa         Input file is Targa format (usually not needed)\n");
+#endif
+  fprintf(stderr, "Switches for advanced users:\n");
+#ifdef DCT_ISLOW_SUPPORTED
+  fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  fprintf(stderr, "  -dct fast      Use fast integer DCT (less accurate)%s\n",
+	  (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  fprintf(stderr, "  -dct float     Use floating-point DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
+#endif
+  fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
+#ifdef INPUT_SMOOTHING_SUPPORTED
+  fprintf(stderr, "  -smooth N      Smooth dithered input (N=1..100 is strength)\n");
+#endif
+  fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
+  fprintf(stderr, "  -outfile name  Specify name for output file\n");
+  fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
+  fprintf(stderr, "Switches for wizards:\n");
+#ifdef C_ARITH_CODING_SUPPORTED
+  fprintf(stderr, "  -arithmetic    Use arithmetic coding\n");
+#endif
+  fprintf(stderr, "  -baseline      Force baseline quantization tables\n");
+  fprintf(stderr, "  -qtables file  Use quantization tables given in file\n");
+  fprintf(stderr, "  -qslots N[,...]    Set component quantization tables\n");
+  fprintf(stderr, "  -sample HxV[,...]  Set component sampling factors\n");
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+  fprintf(stderr, "  -scans file    Create multi-scan JPEG per script file\n");
+#endif
+  exit(EXIT_FAILURE);
+}
+
+
+LOCAL(int)
+parse_switches (j_compress_ptr cinfo, int argc, char **argv,
+		int last_file_arg_seen, boolean for_real)
+/* Parse optional switches.
+ * Returns argv[] index of first file-name argument (== argc if none).
+ * Any file names with indexes <= last_file_arg_seen are ignored;
+ * they have presumably been processed in a previous iteration.
+ * (Pass 0 for last_file_arg_seen on the first or only iteration.)
+ * for_real is FALSE on the first (dummy) pass; we may skip any expensive
+ * processing.
+ */
+{
+  int argn;
+  char * arg;
+  int quality;			/* -quality parameter */
+  int q_scale_factor;		/* scaling percentage for -qtables */
+  boolean force_baseline;
+  boolean simple_progressive;
+  char * qtablefile = NULL;	/* saves -qtables filename if any */
+  char * qslotsarg = NULL;	/* saves -qslots parm if any */
+  char * samplearg = NULL;	/* saves -sample parm if any */
+  char * scansarg = NULL;	/* saves -scans parm if any */
+
+  /* Set up default JPEG parameters. */
+  /* Note that default -quality level need not, and does not,
+   * match the default scaling for an explicit -qtables argument.
+   */
+  quality = 75;			/* default -quality value */
+  q_scale_factor = 100;		/* default to no scaling for -qtables */
+  force_baseline = FALSE;	/* by default, allow 16-bit quantizers */
+  simple_progressive = FALSE;
+  is_targa = FALSE;
+  outfilename = NULL;
+  cinfo->err->trace_level = 0;
+
+  /* Scan command line options, adjust parameters */
+
+  for (argn = 1; argn < argc; argn++) {
+    arg = argv[argn];
+    if (*arg != '-') {
+      /* Not a switch, must be a file name argument */
+      if (argn <= last_file_arg_seen) {
+	outfilename = NULL;	/* -outfile applies to just one input file */
+	continue;		/* ignore this name if previously processed */
+      }
+      break;			/* else done parsing switches */
+    }
+    arg++;			/* advance past switch marker character */
+
+    if (keymatch(arg, "arithmetic", 1)) {
+      /* Use arithmetic coding. */
+#ifdef C_ARITH_CODING_SUPPORTED
+      cinfo->arith_code = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, arithmetic coding not supported\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "baseline", 1)) {
+      /* Force baseline-compatible output (8-bit quantizer values). */
+      force_baseline = TRUE;
+
+    } else if (keymatch(arg, "dct", 2)) {
+      /* Select DCT algorithm. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "int", 1)) {
+	cinfo->dct_method = JDCT_ISLOW;
+      } else if (keymatch(argv[argn], "fast", 2)) {
+	cinfo->dct_method = JDCT_IFAST;
+      } else if (keymatch(argv[argn], "float", 2)) {
+	cinfo->dct_method = JDCT_FLOAT;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
+      /* Enable debug printouts. */
+      /* On first -d, print version identification */
+      static boolean printed_version = FALSE;
+
+      if (! printed_version) {
+	fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n",
+		JVERSION, JCOPYRIGHT);
+	printed_version = TRUE;
+      }
+      cinfo->err->trace_level++;
+
+    } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
+      /* Force a monochrome JPEG file to be generated. */
+      jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
+
+    } else if (keymatch(arg, "maxmemory", 3)) {
+      /* Maximum memory in Kb (or Mb with 'm'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (ch == 'm' || ch == 'M')
+	lval *= 1000L;
+      cinfo->mem->max_memory_to_use = lval * 1000L;
+
+    } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
+      /* Enable entropy parm optimization. */
+#ifdef ENTROPY_OPT_SUPPORTED
+      cinfo->optimize_coding = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "outfile", 4)) {
+      /* Set output file name. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      outfilename = argv[argn];	/* save it away for later use */
+
+    } else if (keymatch(arg, "progressive", 1)) {
+      /* Select simple progressive mode. */
+#ifdef C_PROGRESSIVE_SUPPORTED
+      simple_progressive = TRUE;
+      /* We must postpone execution until num_components is known. */
+#else
+      fprintf(stderr, "%s: sorry, progressive output was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "quality", 1)) {
+      /* Quality factor (quantization table scaling factor). */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &quality) != 1)
+	usage();
+      /* Change scale factor in case -qtables is present. */
+      q_scale_factor = jpeg_quality_scaling(quality);
+
+    } else if (keymatch(arg, "qslots", 2)) {
+      /* Quantization table slot numbers. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      qslotsarg = argv[argn];
+      /* Must delay setting qslots until after we have processed any
+       * colorspace-determining switches, since jpeg_set_colorspace sets
+       * default quant table numbers.
+       */
+
+    } else if (keymatch(arg, "qtables", 2)) {
+      /* Quantization tables fetched from file. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      qtablefile = argv[argn];
+      /* We postpone actually reading the file in case -quality comes later. */
+
+    } else if (keymatch(arg, "restart", 1)) {
+      /* Restart interval in MCU rows (or in MCUs with 'b'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (lval < 0 || lval > 65535L)
+	usage();
+      if (ch == 'b' || ch == 'B') {
+	cinfo->restart_interval = (unsigned int) lval;
+	cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
+      } else {
+	cinfo->restart_in_rows = (int) lval;
+	/* restart_interval will be computed during startup */
+      }
+
+    } else if (keymatch(arg, "sample", 2)) {
+      /* Set sampling factors. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      samplearg = argv[argn];
+      /* Must delay setting sample factors until after we have processed any
+       * colorspace-determining switches, since jpeg_set_colorspace sets
+       * default sampling factors.
+       */
+
+    } else if (keymatch(arg, "scans", 2)) {
+      /* Set scan script. */
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      scansarg = argv[argn];
+      /* We must postpone reading the file in case -progressive appears. */
+#else
+      fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "smooth", 2)) {
+      /* Set input smoothing factor. */
+      int val;
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &val) != 1)
+	usage();
+      if (val < 0 || val > 100)
+	usage();
+      cinfo->smoothing_factor = val;
+
+    } else if (keymatch(arg, "targa", 1)) {
+      /* Input file is Targa format. */
+      is_targa = TRUE;
+
+    } else {
+      usage();			/* bogus switch */
+    }
+  }
+
+  /* Post-switch-scanning cleanup */
+
+  if (for_real) {
+
+    /* Set quantization tables for selected quality. */
+    /* Some or all may be overridden if -qtables is present. */
+    jpeg_set_quality(cinfo, quality, force_baseline);
+
+    if (qtablefile != NULL)	/* process -qtables if it was present */
+      if (! read_quant_tables(cinfo, qtablefile,
+			      q_scale_factor, force_baseline))
+	usage();
+
+    if (qslotsarg != NULL)	/* process -qslots if it was present */
+      if (! set_quant_slots(cinfo, qslotsarg))
+	usage();
+
+    if (samplearg != NULL)	/* process -sample if it was present */
+      if (! set_sample_factors(cinfo, samplearg))
+	usage();
+
+#ifdef C_PROGRESSIVE_SUPPORTED
+    if (simple_progressive)	/* process -progressive; -scans can override */
+      jpeg_simple_progression(cinfo);
+#endif
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+    if (scansarg != NULL)	/* process -scans if it was present */
+      if (! read_scan_script(cinfo, scansarg))
+	usage();
+#endif
+  }
+
+  return argn;			/* return index of next arg (file name) */
+}
+
+
+/*
+ * The main program.
+ */
+
+int
+main (int argc, char **argv)
+{
+  struct jpeg_compress_struct cinfo;
+  struct jpeg_error_mgr jerr;
+#ifdef PROGRESS_REPORT
+  struct cdjpeg_progress_mgr progress;
+#endif
+  int file_index;
+  cjpeg_source_ptr src_mgr;
+  FILE * input_file;
+  FILE * output_file;
+  JDIMENSION num_scanlines;
+
+  /* On Mac, fetch a command line. */
+#ifdef USE_CCOMMAND
+  argc = ccommand(&argv);
+#endif
+
+  progname = argv[0];
+  if (progname == NULL || progname[0] == 0)
+    progname = "cjpeg";		/* in case C library doesn't provide it */
+
+  /* Initialize the JPEG compression object with default error handling. */
+  cinfo.err = jpeg_std_error(&jerr);
+  jpeg_create_compress(&cinfo);
+  /* Add some application-specific error messages (from cderror.h) */
+  jerr.addon_message_table = cdjpeg_message_table;
+  jerr.first_addon_message = JMSG_FIRSTADDONCODE;
+  jerr.last_addon_message = JMSG_LASTADDONCODE;
+
+  /* Now safe to enable signal catcher. */
+#ifdef NEED_SIGNAL_CATCHER
+  enable_signal_catcher((j_common_ptr) &cinfo);
+#endif
+
+  /* Initialize JPEG parameters.
+   * Much of this may be overridden later.
+   * In particular, we don't yet know the input file's color space,
+   * but we need to provide some value for jpeg_set_defaults() to work.
+   */
+
+  cinfo.in_color_space = JCS_RGB; /* arbitrary guess */
+  jpeg_set_defaults(&cinfo);
+
+  /* Scan command line to find file names.
+   * It is convenient to use just one switch-parsing routine, but the switch
+   * values read here are ignored; we will rescan the switches after opening
+   * the input file.
+   */
+
+  file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
+
+#ifdef TWO_FILE_COMMANDLINE
+  /* Must have either -outfile switch or explicit output file name */
+  if (outfilename == NULL) {
+    if (file_index != argc-2) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+    outfilename = argv[file_index+1];
+  } else {
+    if (file_index != argc-1) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+  }
+#else
+  /* Unix style: expect zero or one file name */
+  if (file_index < argc-1) {
+    fprintf(stderr, "%s: only one input file\n", progname);
+    usage();
+  }
+#endif /* TWO_FILE_COMMANDLINE */
+
+  /* Open the input file. */
+  if (file_index < argc) {
+    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default input file is stdin */
+    input_file = read_stdin();
+  }
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+    output_file = write_stdout();
+  }
+
+#ifdef PROGRESS_REPORT
+  start_progress_monitor((j_common_ptr) &cinfo, &progress);
+#endif
+
+  /* Figure out the input file format, and set up to read it. */
+  src_mgr = select_file_type(&cinfo, input_file);
+  src_mgr->input_file = input_file;
+
+  /* Read the input file header to obtain file size & colorspace. */
+  (*src_mgr->start_input) (&cinfo, src_mgr);
+
+  /* Now that we know input colorspace, fix colorspace-dependent defaults */
+  jpeg_default_colorspace(&cinfo);
+
+  /* Adjust default compression parameters by re-parsing the options */
+  file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
+
+  /* Specify data destination for compression */
+  jpeg_stdio_dest(&cinfo, output_file);
+
+  /* Start compressor */
+  jpeg_start_compress(&cinfo, TRUE);
+
+  /* Process data */
+  while (cinfo.next_scanline < cinfo.image_height) {
+    num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr);
+    (void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines);
+  }
+
+  /* Finish compression and release memory */
+  (*src_mgr->finish_input) (&cinfo, src_mgr);
+  jpeg_finish_compress(&cinfo);
+  jpeg_destroy_compress(&cinfo);
+
+  /* Close files, if we opened them */
+  if (input_file != stdin)
+    fclose(input_file);
+  if (output_file != stdout)
+    fclose(output_file);
+
+#ifdef PROGRESS_REPORT
+  end_progress_monitor((j_common_ptr) &cinfo);
+#endif
+
+  /* All done. */
+  exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
+  return 0;			/* suppress no-return-value warnings */
+}

mozilla/jpeg/ckconfig.c

@@ -0,0 +1,402 @@
+/*
+ * ckconfig.c
+ *
+ * Copyright (C) 1991-1994, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ */
+
+/*
+ * This program is intended to help you determine how to configure the JPEG
+ * software for installation on a particular system.  The idea is to try to
+ * compile and execute this program.  If your compiler fails to compile the
+ * program, make changes as indicated in the comments below.  Once you can
+ * compile the program, run it, and it will produce a "jconfig.h" file for
+ * your system.
+ *
+ * As a general rule, each time you try to compile this program,
+ * pay attention only to the *first* error message you get from the compiler.
+ * Many C compilers will issue lots of spurious error messages once they
+ * have gotten confused.  Go to the line indicated in the first error message,
+ * and read the comments preceding that line to see what to change.
+ *
+ * Almost all of the edits you may need to make to this program consist of
+ * changing a line that reads "#define SOME_SYMBOL" to "#undef SOME_SYMBOL",
+ * or vice versa.  This is called defining or undefining that symbol.
+ */
+
+
+/* First we must see if your system has the include files we need.
+ * We start out with the assumption that your system has all the ANSI-standard
+ * include files.  If you get any error trying to include one of these files,
+ * undefine the corresponding HAVE_xxx symbol.
+ */
+
+#define HAVE_STDDEF_H		/* replace 'define' by 'undef' if error here */
+#ifdef HAVE_STDDEF_H		/* next line will be skipped if you undef... */
+#include <stddef.h>
+#endif
+
+#define HAVE_STDLIB_H		/* same thing for stdlib.h */
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+
+#include <stdio.h>		/* If you ain't got this, you ain't got C. */
+
+/* We have to see if your string functions are defined by
+ * strings.h (old BSD convention) or string.h (everybody else).
+ * We try the non-BSD convention first; define NEED_BSD_STRINGS
+ * if the compiler says it can't find string.h.
+ */
+
+#undef NEED_BSD_STRINGS
+
+#ifdef NEED_BSD_STRINGS
+#include <strings.h>
+#else
+#include <string.h>
+#endif
+
+/* On some systems (especially older Unix machines), type size_t is
+ * defined only in the include file <sys/types.h>.  If you get a failure
+ * on the size_t test below, try defining NEED_SYS_TYPES_H.
+ */
+
+#undef NEED_SYS_TYPES_H		/* start by assuming we don't need it */
+#ifdef NEED_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+
+
+/* Usually type size_t is defined in one of the include files we've included
+ * above.  If not, you'll get an error on the "typedef size_t my_size_t;" line.
+ * In that case, first try defining NEED_SYS_TYPES_H just above.
+ * If that doesn't work, you'll have to search through your system library
+ * to figure out which include file defines "size_t".  Look for a line that
+ * says "typedef something-or-other size_t;".  Then, change the line below
+ * that says "#include <someincludefile.h>" to instead include the file
+ * you found size_t in, and define NEED_SPECIAL_INCLUDE.  If you can't find
+ * type size_t anywhere, try replacing "#include <someincludefile.h>" with
+ * "typedef unsigned int size_t;".
+ */
+
+#undef NEED_SPECIAL_INCLUDE	/* assume we DON'T need it, for starters */
+
+#ifdef NEED_SPECIAL_INCLUDE
+#include <someincludefile.h>
+#endif
+
+typedef size_t my_size_t;	/* The payoff: do we have size_t now? */
+
+
+/* The next question is whether your compiler supports ANSI-style function
+ * prototypes.  You need to know this in order to choose between using
+ * makefile.ansi and using makefile.unix.
+ * The #define line below is set to assume you have ANSI function prototypes.
+ * If you get an error in this group of lines, undefine HAVE_PROTOTYPES.
+ */
+
+#define HAVE_PROTOTYPES
+
+#ifdef HAVE_PROTOTYPES
+int testfunction (int arg1, int * arg2); /* check prototypes */
+
+struct methods_struct {		/* check method-pointer declarations */
+  int (*error_exit) (char *msgtext);
+  int (*trace_message) (char *msgtext);
+  int (*another_method) (void);
+};
+
+int testfunction (int arg1, int * arg2) /* check definitions */
+{
+  return arg2[arg1];
+}
+
+int test2function (void)	/* check void arg list */
+{
+  return 0;
+}
+#endif
+
+
+/* Now we want to find out if your compiler knows what "unsigned char" means.
+ * If you get an error on the "unsigned char un_char;" line,
+ * then undefine HAVE_UNSIGNED_CHAR.
+ */
+
+#define HAVE_UNSIGNED_CHAR
+
+#ifdef HAVE_UNSIGNED_CHAR
+unsigned char un_char;
+#endif
+
+
+/* Now we want to find out if your compiler knows what "unsigned short" means.
+ * If you get an error on the "unsigned short un_short;" line,
+ * then undefine HAVE_UNSIGNED_SHORT.
+ */
+
+#define HAVE_UNSIGNED_SHORT
+
+#ifdef HAVE_UNSIGNED_SHORT
+unsigned short un_short;
+#endif
+
+
+/* Now we want to find out if your compiler understands type "void".
+ * If you get an error anywhere in here, undefine HAVE_VOID.
+ */
+
+#define HAVE_VOID
+
+#ifdef HAVE_VOID
+/* Caution: a C++ compiler will insist on complete prototypes */
+typedef void * void_ptr;	/* check void * */
+#ifdef HAVE_PROTOTYPES		/* check ptr to function returning void */
+typedef void (*void_func) (int a, int b);
+#else
+typedef void (*void_func) ();
+#endif
+
+#ifdef HAVE_PROTOTYPES		/* check void function result */
+void test3function (void_ptr arg1, void_func arg2)
+#else
+void test3function (arg1, arg2)
+     void_ptr arg1;
+     void_func arg2;
+#endif
+{
+  char * locptr = (char *) arg1; /* check casting to and from void * */
+  arg1 = (void *) locptr;
+  (*arg2) (1, 2);		/* check call of fcn returning void */
+}
+#endif
+
+
+/* Now we want to find out if your compiler knows what "const" means.
+ * If you get an error here, undefine HAVE_CONST.
+ */
+
+#define HAVE_CONST
+
+#ifdef HAVE_CONST
+static const int carray[3] = {1, 2, 3};
+
+#ifdef HAVE_PROTOTYPES
+int test4function (const int arg1)
+#else
+int test4function (arg1)
+     const int arg1;
+#endif
+{
+  return carray[arg1];
+}
+#endif
+
+
+/* If you get an error or warning about this structure definition,
+ * define INCOMPLETE_TYPES_BROKEN.
+ */
+
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifndef INCOMPLETE_TYPES_BROKEN
+typedef struct undefined_structure * undef_struct_ptr;
+#endif
+
+
+/* If you get an error about duplicate names,
+ * define NEED_SHORT_EXTERNAL_NAMES.
+ */
+
+#undef NEED_SHORT_EXTERNAL_NAMES
+
+#ifndef NEED_SHORT_EXTERNAL_NAMES
+
+int possibly_duplicate_function ()
+{
+  return 0;
+}
+
+int possibly_dupli_function ()
+{
+  return 1;
+}
+
+#endif
+
+
+
+/************************************************************************
+ *  OK, that's it.  You should not have to change anything beyond this
+ *  point in order to compile and execute this program.  (You might get
+ *  some warnings, but you can ignore them.)
+ *  When you run the program, it will make a couple more tests that it
+ *  can do automatically, and then it will create jconfig.h and print out
+ *  any additional suggestions it has.
+ ************************************************************************
+ */
+
+
+#ifdef HAVE_PROTOTYPES
+int is_char_signed (int arg)
+#else
+int is_char_signed (arg)
+     int arg;
+#endif
+{
+  if (arg == 189) {		/* expected result for unsigned char */
+    return 0;			/* type char is unsigned */
+  }
+  else if (arg != -67) {	/* expected result for signed char */
+    printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
+    printf("I fear the JPEG software will not work at all.\n\n");
+  }
+  return 1;			/* assume char is signed otherwise */
+}
+
+
+#ifdef HAVE_PROTOTYPES
+int is_shifting_signed (long arg)
+#else
+int is_shifting_signed (arg)
+     long arg;
+#endif
+/* See whether right-shift on a long is signed or not. */
+{
+  long res = arg >> 4;
+
+  if (res == -0x7F7E80CL) {	/* expected result for signed shift */
+    return 1;			/* right shift is signed */
+  }
+  /* see if unsigned-shift hack will fix it. */
+  /* we can't just test exact value since it depends on width of long... */
+  res |= (~0L) << (32-4);
+  if (res == -0x7F7E80CL) {	/* expected result now? */
+    return 0;			/* right shift is unsigned */
+  }
+  printf("Right shift isn't acting as I expect it to.\n");
+  printf("I fear the JPEG software will not work at all.\n\n");
+  return 0;			/* try it with unsigned anyway */
+}
+
+
+#ifdef HAVE_PROTOTYPES
+int main (int argc, char ** argv)
+#else
+int main (argc, argv)
+     int argc;
+     char ** argv;
+#endif
+{
+  char signed_char_check = (char) (-67);
+  FILE *outfile;
+
+  /* Attempt to write jconfig.h */
+  if ((outfile = fopen("jconfig.h", "w")) == NULL) {
+    printf("Failed to write jconfig.h\n");
+    return 1;
+  }
+
+  /* Write out all the info */
+  fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n");
+  fprintf(outfile, "/* see jconfig.doc for explanations */\n\n");
+#ifdef HAVE_PROTOTYPES
+  fprintf(outfile, "#define HAVE_PROTOTYPES\n");
+#else
+  fprintf(outfile, "#undef HAVE_PROTOTYPES\n");
+#endif
+#ifdef HAVE_UNSIGNED_CHAR
+  fprintf(outfile, "#define HAVE_UNSIGNED_CHAR\n");
+#else
+  fprintf(outfile, "#undef HAVE_UNSIGNED_CHAR\n");
+#endif
+#ifdef HAVE_UNSIGNED_SHORT
+  fprintf(outfile, "#define HAVE_UNSIGNED_SHORT\n");
+#else
+  fprintf(outfile, "#undef HAVE_UNSIGNED_SHORT\n");
+#endif
+#ifdef HAVE_VOID
+  fprintf(outfile, "/* #define void char */\n");
+#else
+  fprintf(outfile, "#define void char\n");
+#endif
+#ifdef HAVE_CONST
+  fprintf(outfile, "/* #define const */\n");
+#else
+  fprintf(outfile, "#define const\n");
+#endif
+  if (is_char_signed((int) signed_char_check))
+    fprintf(outfile, "#undef CHAR_IS_UNSIGNED\n");
+  else
+    fprintf(outfile, "#define CHAR_IS_UNSIGNED\n");
+#ifdef HAVE_STDDEF_H
+  fprintf(outfile, "#define HAVE_STDDEF_H\n");
+#else
+  fprintf(outfile, "#undef HAVE_STDDEF_H\n");
+#endif
+#ifdef HAVE_STDLIB_H
+  fprintf(outfile, "#define HAVE_STDLIB_H\n");
+#else
+  fprintf(outfile, "#undef HAVE_STDLIB_H\n");
+#endif
+#ifdef NEED_BSD_STRINGS
+  fprintf(outfile, "#define NEED_BSD_STRINGS\n");
+#else
+  fprintf(outfile, "#undef NEED_BSD_STRINGS\n");
+#endif
+#ifdef NEED_SYS_TYPES_H
+  fprintf(outfile, "#define NEED_SYS_TYPES_H\n");
+#else
+  fprintf(outfile, "#undef NEED_SYS_TYPES_H\n");
+#endif
+  fprintf(outfile, "#undef NEED_FAR_POINTERS\n");
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+  fprintf(outfile, "#define NEED_SHORT_EXTERNAL_NAMES\n");
+#else
+  fprintf(outfile, "#undef NEED_SHORT_EXTERNAL_NAMES\n");
+#endif
+#ifdef INCOMPLETE_TYPES_BROKEN
+  fprintf(outfile, "#define INCOMPLETE_TYPES_BROKEN\n");
+#else
+  fprintf(outfile, "#undef INCOMPLETE_TYPES_BROKEN\n");
+#endif
+  fprintf(outfile, "\n#ifdef JPEG_INTERNALS\n\n");
+  if (is_shifting_signed(-0x7F7E80B1L))
+    fprintf(outfile, "#undef RIGHT_SHIFT_IS_UNSIGNED\n");
+  else
+    fprintf(outfile, "#define RIGHT_SHIFT_IS_UNSIGNED\n");
+  fprintf(outfile, "\n#endif /* JPEG_INTERNALS */\n");
+  fprintf(outfile, "\n#ifdef JPEG_CJPEG_DJPEG\n\n");
+  fprintf(outfile, "#define BMP_SUPPORTED		/* BMP image file format */\n");
+  fprintf(outfile, "#define GIF_SUPPORTED		/* GIF image file format */\n");
+  fprintf(outfile, "#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */\n");
+  fprintf(outfile, "#undef RLE_SUPPORTED		/* Utah RLE image file format */\n");
+  fprintf(outfile, "#define TARGA_SUPPORTED		/* Targa image file format */\n\n");
+  fprintf(outfile, "#undef TWO_FILE_COMMANDLINE	/* You may need this on non-Unix systems */\n");
+  fprintf(outfile, "#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */\n");
+  fprintf(outfile, "#undef DONT_USE_B_MODE\n");
+  fprintf(outfile, "/* #define PROGRESS_REPORT */	/* optional */\n");
+  fprintf(outfile, "\n#endif /* JPEG_CJPEG_DJPEG */\n");
+
+  /* Close the jconfig.h file */
+  fclose(outfile);
+
+  /* User report */
+  printf("Configuration check for Independent JPEG Group's software done.\n");
+  printf("\nI have written the jconfig.h file for you.\n\n");
+#ifdef HAVE_PROTOTYPES
+  printf("You should use makefile.ansi as the starting point for your Makefile.\n");
+#else
+  printf("You should use makefile.unix as the starting point for your Makefile.\n");
+#endif
+
+#ifdef NEED_SPECIAL_INCLUDE
+  printf("\nYou'll need to change jconfig.h to include the system include file\n");
+  printf("that you found type size_t in, or add a direct definition of type\n");
+  printf("size_t if that's what you used.  Just add it to the end.\n");
+#endif
+
+  return 0;
+}

mozilla/jpeg/coderules.doc

@@ -0,0 +1,118 @@
+IJG JPEG LIBRARY:  CODING RULES
+
+Copyright (C) 1991-1996, Thomas G. Lane.
+This file is part of the Independent JPEG Group's software.
+For conditions of distribution and use, see the accompanying README file.
+
+
+Since numerous people will be contributing code and bug fixes, it's important
+to establish a common coding style.  The goal of using similar coding styles
+is much more important than the details of just what that style is.
+
+In general we follow the recommendations of "Recommended C Style and Coding
+Standards" revision 6.1 (Cannon et al. as modified by Spencer, Keppel and
+Brader).  This document is available in the IJG FTP archive (see
+jpeg/doc/cstyle.ms.tbl.Z, or cstyle.txt.Z for those without nroff/tbl).
+
+Block comments should be laid out thusly:
+
+/*
+ *  Block comments in this style.
+ */
+
+We indent statements in K&R style, e.g.,
+	if (test) {
+	  then-part;
+	} else {
+	  else-part;
+	}
+with two spaces per indentation level.  (This indentation convention is
+handled automatically by GNU Emacs and many other text editors.)
+
+Multi-word names should be written in lower case with underscores, e.g.,
+multi_word_name (not multiWordName).  Preprocessor symbols and enum constants
+are similar but upper case (MULTI_WORD_NAME).  Names should be unique within
+the first fifteen characters.  (On some older systems, global names must be
+unique within six characters.  We accommodate this without cluttering the
+source code by using macros to substitute shorter names.)
+
+We use function prototypes everywhere; we rely on automatic source code
+transformation to feed prototype-less C compilers.  Transformation is done
+by the simple and portable tool 'ansi2knr.c' (courtesy of Ghostscript).
+ansi2knr is not very bright, so it imposes a format requirement on function
+declarations: the function name MUST BEGIN IN COLUMN 1.  Thus all functions
+should be written in the following style:
+
+LOCAL(int *)
+function_name (int a, char *b)
+{
+    code...
+}
+
+Note that each function definition must begin with GLOBAL(type), LOCAL(type),
+or METHODDEF(type).  These macros expand to "static type" or just "type" as
+appropriate.  They provide a readable indication of the routine's usage and
+can readily be changed for special needs.  (For instance, special linkage
+keywords can be inserted for use in Windows DLLs.)
+
+ansi2knr does not transform method declarations (function pointers in
+structs).  We handle these with a macro JMETHOD, defined as
+	#ifdef HAVE_PROTOTYPES
+	#define JMETHOD(type,methodname,arglist)  type (*methodname) arglist
+	#else
+	#define JMETHOD(type,methodname,arglist)  type (*methodname) ()
+	#endif
+which is used like this:
+	struct function_pointers {
+	  JMETHOD(void, init_entropy_encoder, (int somearg, jparms *jp));
+	  JMETHOD(void, term_entropy_encoder, (void));
+	};
+Note the set of parentheses surrounding the parameter list.
+
+A similar solution is used for forward and external function declarations
+(see the EXTERN and JPP macros).
+
+If the code is to work on non-ANSI compilers, we cannot rely on a prototype
+declaration to coerce actual parameters into the right types.  Therefore, use
+explicit casts on actual parameters whenever the actual parameter type is not
+identical to the formal parameter.  Beware of implicit conversions to "int".
+
+It seems there are some non-ANSI compilers in which the sizeof() operator
+is defined to return int, yet size_t is defined as long.  Needless to say,
+this is brain-damaged.  Always use the SIZEOF() macro in place of sizeof(),
+so that the result is guaranteed to be of type size_t.
+
+
+The JPEG library is intended to be used within larger programs.  Furthermore,
+we want it to be reentrant so that it can be used by applications that process
+multiple images concurrently.  The following rules support these requirements:
+
+1. Avoid direct use of file I/O, "malloc", error report printouts, etc;
+pass these through the common routines provided.
+
+2. Minimize global namespace pollution.  Functions should be declared static
+wherever possible.  (Note that our method-based calling conventions help this
+a lot: in many modules only the initialization function will ever need to be
+called directly, so only that function need be externally visible.)  All
+global function names should begin with "jpeg_", and should have an
+abbreviated name (unique in the first six characters) substituted by macro
+when NEED_SHORT_EXTERNAL_NAMES is set.
+
+3. Don't use global variables; anything that must be used in another module
+should be in the common data structures.
+
+4. Don't use static variables except for read-only constant tables.  Variables
+that should be private to a module can be placed into private structures (see
+the system architecture document, structure.doc).
+
+5. Source file names should begin with "j" for files that are part of the
+library proper; source files that are not part of the library, such as cjpeg.c
+and djpeg.c, do not begin with "j".  Keep source file names to eight
+characters (plus ".c" or ".h", etc) to make life easy for MS-DOSers.  Keep
+compression and decompression code in separate source files --- some
+applications may want only one half of the library.
+
+Note: these rules (particularly #4) are not followed religiously in the
+modules that are used in cjpeg/djpeg but are not part of the JPEG library
+proper.  Those modules are not really intended to be used in other
+applications.

mozilla/jpeg/djpeg.c

@@ -0,0 +1,616 @@
+/*
+ * djpeg.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a command-line user interface for the JPEG decompressor.
+ * It should work on any system with Unix- or MS-DOS-style command lines.
+ *
+ * Two different command line styles are permitted, depending on the
+ * compile-time switch TWO_FILE_COMMANDLINE:
+ *	djpeg [options]  inputfile outputfile
+ *	djpeg [options]  [inputfile]
+ * In the second style, output is always to standard output, which you'd
+ * normally redirect to a file or pipe to some other program.  Input is
+ * either from a named file or from standard input (typically redirected).
+ * The second style is convenient on Unix but is unhelpful on systems that
+ * don't support pipes.  Also, you MUST use the first style if your system
+ * doesn't do binary I/O to stdin/stdout.
+ * To simplify script writing, the "-outfile" switch is provided.  The syntax
+ *	djpeg [options]  -outfile outputfile  inputfile
+ * works regardless of which command line style is used.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include "jversion.h"		/* for version message */
+
+#include <ctype.h>		/* to declare isprint() */
+
+#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
+#ifdef __MWERKS__
+#include <SIOUX.h>              /* Metrowerks needs this */
+#include <console.h>		/* ... and this */
+#endif
+#ifdef THINK_C
+#include <console.h>		/* Think declares it here */
+#endif
+#endif
+
+
+/* Create the add-on message string table. */
+
+#define JMESSAGE(code,string)	string ,
+
+static const char * const cdjpeg_message_table[] = {
+#include "cderror.h"
+  NULL
+};
+
+
+/*
+ * This list defines the known output image formats
+ * (not all of which need be supported by a given version).
+ * You can change the default output format by defining DEFAULT_FMT;
+ * indeed, you had better do so if you undefine PPM_SUPPORTED.
+ */
+
+typedef enum {
+	FMT_BMP,		/* BMP format (Windows flavor) */
+	FMT_GIF,		/* GIF format */
+	FMT_OS2,		/* BMP format (OS/2 flavor) */
+	FMT_PPM,		/* PPM/PGM (PBMPLUS formats) */
+	FMT_RLE,		/* RLE format */
+	FMT_TARGA,		/* Targa format */
+	FMT_TIFF		/* TIFF format */
+} IMAGE_FORMATS;
+
+#ifndef DEFAULT_FMT		/* so can override from CFLAGS in Makefile */
+#define DEFAULT_FMT	FMT_PPM
+#endif
+
+static IMAGE_FORMATS requested_fmt;
+
+
+/*
+ * Argument-parsing code.
+ * The switch parser is designed to be useful with DOS-style command line
+ * syntax, ie, intermixed switches and file names, where only the switches
+ * to the left of a given file name affect processing of that file.
+ * The main program in this file doesn't actually use this capability...
+ */
+
+
+static const char * progname;	/* program name for error messages */
+static char * outfilename;	/* for -outfile switch */
+
+
+LOCAL(void)
+usage (void)
+/* complain about bad command line */
+{
+  fprintf(stderr, "usage: %s [switches] ", progname);
+#ifdef TWO_FILE_COMMANDLINE
+  fprintf(stderr, "inputfile outputfile\n");
+#else
+  fprintf(stderr, "[inputfile]\n");
+#endif
+
+  fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -colors N      Reduce image to no more than N colors\n");
+  fprintf(stderr, "  -fast          Fast, low-quality processing\n");
+  fprintf(stderr, "  -grayscale     Force grayscale output\n");
+#ifdef IDCT_SCALING_SUPPORTED
+  fprintf(stderr, "  -scale M/N     Scale output image by fraction M/N, eg, 1/8\n");
+#endif
+#ifdef BMP_SUPPORTED
+  fprintf(stderr, "  -bmp           Select BMP output format (Windows style)%s\n",
+	  (DEFAULT_FMT == FMT_BMP ? " (default)" : ""));
+#endif
+#ifdef GIF_SUPPORTED
+  fprintf(stderr, "  -gif           Select GIF output format%s\n",
+	  (DEFAULT_FMT == FMT_GIF ? " (default)" : ""));
+#endif
+#ifdef BMP_SUPPORTED
+  fprintf(stderr, "  -os2           Select BMP output format (OS/2 style)%s\n",
+	  (DEFAULT_FMT == FMT_OS2 ? " (default)" : ""));
+#endif
+#ifdef PPM_SUPPORTED
+  fprintf(stderr, "  -pnm           Select PBMPLUS (PPM/PGM) output format%s\n",
+	  (DEFAULT_FMT == FMT_PPM ? " (default)" : ""));
+#endif
+#ifdef RLE_SUPPORTED
+  fprintf(stderr, "  -rle           Select Utah RLE output format%s\n",
+	  (DEFAULT_FMT == FMT_RLE ? " (default)" : ""));
+#endif
+#ifdef TARGA_SUPPORTED
+  fprintf(stderr, "  -targa         Select Targa output format%s\n",
+	  (DEFAULT_FMT == FMT_TARGA ? " (default)" : ""));
+#endif
+  fprintf(stderr, "Switches for advanced users:\n");
+#ifdef DCT_ISLOW_SUPPORTED
+  fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  fprintf(stderr, "  -dct fast      Use fast integer DCT (less accurate)%s\n",
+	  (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  fprintf(stderr, "  -dct float     Use floating-point DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
+#endif
+  fprintf(stderr, "  -dither fs     Use F-S dithering (default)\n");
+  fprintf(stderr, "  -dither none   Don't use dithering in quantization\n");
+  fprintf(stderr, "  -dither ordered  Use ordered dither (medium speed, quality)\n");
+#ifdef QUANT_2PASS_SUPPORTED
+  fprintf(stderr, "  -map FILE      Map to colors used in named image file\n");
+#endif
+  fprintf(stderr, "  -nosmooth      Don't use high-quality upsampling\n");
+#ifdef QUANT_1PASS_SUPPORTED
+  fprintf(stderr, "  -onepass       Use 1-pass quantization (fast, low quality)\n");
+#endif
+  fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
+  fprintf(stderr, "  -outfile name  Specify name for output file\n");
+  fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
+  exit(EXIT_FAILURE);
+}
+
+
+LOCAL(int)
+parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
+		int last_file_arg_seen, boolean for_real)
+/* Parse optional switches.
+ * Returns argv[] index of first file-name argument (== argc if none).
+ * Any file names with indexes <= last_file_arg_seen are ignored;
+ * they have presumably been processed in a previous iteration.
+ * (Pass 0 for last_file_arg_seen on the first or only iteration.)
+ * for_real is FALSE on the first (dummy) pass; we may skip any expensive
+ * processing.
+ */
+{
+  int argn;
+  char * arg;
+
+  /* Set up default JPEG parameters. */
+  requested_fmt = DEFAULT_FMT;	/* set default output file format */
+  outfilename = NULL;
+  cinfo->err->trace_level = 0;
+
+  /* Scan command line options, adjust parameters */
+
+  for (argn = 1; argn < argc; argn++) {
+    arg = argv[argn];
+    if (*arg != '-') {
+      /* Not a switch, must be a file name argument */
+      if (argn <= last_file_arg_seen) {
+	outfilename = NULL;	/* -outfile applies to just one input file */
+	continue;		/* ignore this name if previously processed */
+      }
+      break;			/* else done parsing switches */
+    }
+    arg++;			/* advance past switch marker character */
+
+    if (keymatch(arg, "bmp", 1)) {
+      /* BMP output format. */
+      requested_fmt = FMT_BMP;
+
+    } else if (keymatch(arg, "colors", 1) || keymatch(arg, "colours", 1) ||
+	       keymatch(arg, "quantize", 1) || keymatch(arg, "quantise", 1)) {
+      /* Do color quantization. */
+      int val;
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &val) != 1)
+	usage();
+      cinfo->desired_number_of_colors = val;
+      cinfo->quantize_colors = TRUE;
+
+    } else if (keymatch(arg, "dct", 2)) {
+      /* Select IDCT algorithm. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "int", 1)) {
+	cinfo->dct_method = JDCT_ISLOW;
+      } else if (keymatch(argv[argn], "fast", 2)) {
+	cinfo->dct_method = JDCT_IFAST;
+      } else if (keymatch(argv[argn], "float", 2)) {
+	cinfo->dct_method = JDCT_FLOAT;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "dither", 2)) {
+      /* Select dithering algorithm. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "fs", 2)) {
+	cinfo->dither_mode = JDITHER_FS;
+      } else if (keymatch(argv[argn], "none", 2)) {
+	cinfo->dither_mode = JDITHER_NONE;
+      } else if (keymatch(argv[argn], "ordered", 2)) {
+	cinfo->dither_mode = JDITHER_ORDERED;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
+      /* Enable debug printouts. */
+      /* On first -d, print version identification */
+      static boolean printed_version = FALSE;
+
+      if (! printed_version) {
+	fprintf(stderr, "Independent JPEG Group's DJPEG, version %s\n%s\n",
+		JVERSION, JCOPYRIGHT);
+	printed_version = TRUE;
+      }
+      cinfo->err->trace_level++;
+
+    } else if (keymatch(arg, "fast", 1)) {
+      /* Select recommended processing options for quick-and-dirty output. */
+      cinfo->two_pass_quantize = FALSE;
+      cinfo->dither_mode = JDITHER_ORDERED;
+      if (! cinfo->quantize_colors) /* don't override an earlier -colors */
+	cinfo->desired_number_of_colors = 216;
+      cinfo->dct_method = JDCT_FASTEST;
+      cinfo->do_fancy_upsampling = FALSE;
+
+    } else if (keymatch(arg, "gif", 1)) {
+      /* GIF output format. */
+      requested_fmt = FMT_GIF;
+
+    } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
+      /* Force monochrome output. */
+      cinfo->out_color_space = JCS_GRAYSCALE;
+
+    } else if (keymatch(arg, "map", 3)) {
+      /* Quantize to a color map taken from an input file. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (for_real) {		/* too expensive to do twice! */
+#ifdef QUANT_2PASS_SUPPORTED	/* otherwise can't quantize to supplied map */
+	FILE * mapfile;
+
+	if ((mapfile = fopen(argv[argn], READ_BINARY)) == NULL) {
+	  fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
+	  exit(EXIT_FAILURE);
+	}
+	read_color_map(cinfo, mapfile);
+	fclose(mapfile);
+	cinfo->quantize_colors = TRUE;
+#else
+	ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+      }
+
+    } else if (keymatch(arg, "maxmemory", 3)) {
+      /* Maximum memory in Kb (or Mb with 'm'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (ch == 'm' || ch == 'M')
+	lval *= 1000L;
+      cinfo->mem->max_memory_to_use = lval * 1000L;
+
+    } else if (keymatch(arg, "nosmooth", 3)) {
+      /* Suppress fancy upsampling */
+      cinfo->do_fancy_upsampling = FALSE;
+
+    } else if (keymatch(arg, "onepass", 3)) {
+      /* Use fast one-pass quantization. */
+      cinfo->two_pass_quantize = FALSE;
+
+    } else if (keymatch(arg, "os2", 3)) {
+      /* BMP output format (OS/2 flavor). */
+      requested_fmt = FMT_OS2;
+
+    } else if (keymatch(arg, "outfile", 4)) {
+      /* Set output file name. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      outfilename = argv[argn];	/* save it away for later use */
+
+    } else if (keymatch(arg, "pnm", 1) || keymatch(arg, "ppm", 1)) {
+      /* PPM/PGM output format. */
+      requested_fmt = FMT_PPM;
+
+    } else if (keymatch(arg, "rle", 1)) {
+      /* RLE output format. */
+      requested_fmt = FMT_RLE;
+
+    } else if (keymatch(arg, "scale", 1)) {
+      /* Scale the output image by a fraction M/N. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d/%d",
+		 &cinfo->scale_num, &cinfo->scale_denom) != 2)
+	usage();
+
+    } else if (keymatch(arg, "targa", 1)) {
+      /* Targa output format. */
+      requested_fmt = FMT_TARGA;
+
+    } else {
+      usage();			/* bogus switch */
+    }
+  }
+
+  return argn;			/* return index of next arg (file name) */
+}
+
+
+/*
+ * Marker processor for COM and interesting APPn markers.
+ * This replaces the library's built-in processor, which just skips the marker.
+ * We want to print out the marker as text, to the extent possible.
+ * Note this code relies on a non-suspending data source.
+ */
+
+LOCAL(unsigned int)
+jpeg_getc (j_decompress_ptr cinfo)
+/* Read next byte */
+{
+  struct jpeg_source_mgr * datasrc = cinfo->src;
+
+  if (datasrc->bytes_in_buffer == 0) {
+    if (! (*datasrc->fill_input_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+  }
+  datasrc->bytes_in_buffer--;
+  return GETJOCTET(*datasrc->next_input_byte++);
+}
+
+
+METHODDEF(boolean)
+print_text_marker (j_decompress_ptr cinfo)
+{
+  boolean traceit = (cinfo->err->trace_level >= 1);
+  INT32 length;
+  unsigned int ch;
+  unsigned int lastch = 0;
+
+  length = jpeg_getc(cinfo) << 8;
+  length += jpeg_getc(cinfo);
+  length -= 2;			/* discount the length word itself */
+
+  if (traceit) {
+    if (cinfo->unread_marker == JPEG_COM)
+      fprintf(stderr, "Comment, length %ld:\n", (long) length);
+    else			/* assume it is an APPn otherwise */
+      fprintf(stderr, "APP%d, length %ld:\n",
+	      cinfo->unread_marker - JPEG_APP0, (long) length);
+  }
+
+  while (--length >= 0) {
+    ch = jpeg_getc(cinfo);
+    if (traceit) {
+      /* Emit the character in a readable form.
+       * Nonprintables are converted to \nnn form,
+       * while \ is converted to \\.
+       * Newlines in CR, CR/LF, or LF form will be printed as one newline.
+       */
+      if (ch == '\r') {
+	fprintf(stderr, "\n");
+      } else if (ch == '\n') {
+	if (lastch != '\r')
+	  fprintf(stderr, "\n");
+      } else if (ch == '\\') {
+	fprintf(stderr, "\\\\");
+      } else if (isprint(ch)) {
+	putc(ch, stderr);
+      } else {
+	fprintf(stderr, "\\%03o", ch);
+      }
+      lastch = ch;
+    }
+  }
+
+  if (traceit)
+    fprintf(stderr, "\n");
+
+  return TRUE;
+}
+
+
+/*
+ * The main program.
+ */
+
+int
+main (int argc, char **argv)
+{
+  struct jpeg_decompress_struct cinfo;
+  struct jpeg_error_mgr jerr;
+#ifdef PROGRESS_REPORT
+  struct cdjpeg_progress_mgr progress;
+#endif
+  int file_index;
+  djpeg_dest_ptr dest_mgr = NULL;
+  FILE * input_file;
+  FILE * output_file;
+  JDIMENSION num_scanlines;
+
+  /* On Mac, fetch a command line. */
+#ifdef USE_CCOMMAND
+  argc = ccommand(&argv);
+#endif
+
+  progname = argv[0];
+  if (progname == NULL || progname[0] == 0)
+    progname = "djpeg";		/* in case C library doesn't provide it */
+
+  /* Initialize the JPEG decompression object with default error handling. */
+  cinfo.err = jpeg_std_error(&jerr);
+  jpeg_create_decompress(&cinfo);
+  /* Add some application-specific error messages (from cderror.h) */
+  jerr.addon_message_table = cdjpeg_message_table;
+  jerr.first_addon_message = JMSG_FIRSTADDONCODE;
+  jerr.last_addon_message = JMSG_LASTADDONCODE;
+
+  /* Insert custom marker processor for COM and APP12.
+   * APP12 is used by some digital camera makers for textual info,
+   * so we provide the ability to display it as text.
+   * If you like, additional APPn marker types can be selected for display,
+   * but don't try to override APP0 or APP14 this way (see libjpeg.doc).
+   */
+  jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker);
+  jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker);
+
+  /* Now safe to enable signal catcher. */
+#ifdef NEED_SIGNAL_CATCHER
+  enable_signal_catcher((j_common_ptr) &cinfo);
+#endif
+
+  /* Scan command line to find file names. */
+  /* It is convenient to use just one switch-parsing routine, but the switch
+   * values read here are ignored; we will rescan the switches after opening
+   * the input file.
+   * (Exception: tracing level set here controls verbosity for COM markers
+   * found during jpeg_read_header...)
+   */
+
+  file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
+
+#ifdef TWO_FILE_COMMANDLINE
+  /* Must have either -outfile switch or explicit output file name */
+  if (outfilename == NULL) {
+    if (file_index != argc-2) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+    outfilename = argv[file_index+1];
+  } else {
+    if (file_index != argc-1) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+  }
+#else
+  /* Unix style: expect zero or one file name */
+  if (file_index < argc-1) {
+    fprintf(stderr, "%s: only one input file\n", progname);
+    usage();
+  }
+#endif /* TWO_FILE_COMMANDLINE */
+
+  /* Open the input file. */
+  if (file_index < argc) {
+    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default input file is stdin */
+    input_file = read_stdin();
+  }
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+    output_file = write_stdout();
+  }
+
+#ifdef PROGRESS_REPORT
+  start_progress_monitor((j_common_ptr) &cinfo, &progress);
+#endif
+
+  /* Specify data source for decompression */
+  jpeg_stdio_src(&cinfo, input_file);
+
+  /* Read file header, set default decompression parameters */
+  (void) jpeg_read_header(&cinfo, TRUE);
+
+  /* Adjust default decompression parameters by re-parsing the options */
+  file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
+
+  /* Initialize the output module now to let it override any crucial
+   * option settings (for instance, GIF wants to force color quantization).
+   */
+  switch (requested_fmt) {
+#ifdef BMP_SUPPORTED
+  case FMT_BMP:
+    dest_mgr = jinit_write_bmp(&cinfo, FALSE);
+    break;
+  case FMT_OS2:
+    dest_mgr = jinit_write_bmp(&cinfo, TRUE);
+    break;
+#endif
+#ifdef GIF_SUPPORTED
+  case FMT_GIF:
+    dest_mgr = jinit_write_gif(&cinfo);
+    break;
+#endif
+#ifdef PPM_SUPPORTED
+  case FMT_PPM:
+    dest_mgr = jinit_write_ppm(&cinfo);
+    break;
+#endif
+#ifdef RLE_SUPPORTED
+  case FMT_RLE:
+    dest_mgr = jinit_write_rle(&cinfo);
+    break;
+#endif
+#ifdef TARGA_SUPPORTED
+  case FMT_TARGA:
+    dest_mgr = jinit_write_targa(&cinfo);
+    break;
+#endif
+  default:
+    ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT);
+    break;
+  }
+  dest_mgr->output_file = output_file;
+
+  /* Start decompressor */
+  (void) jpeg_start_decompress(&cinfo);
+
+  /* Write output file header */
+  (*dest_mgr->start_output) (&cinfo, dest_mgr);
+
+  /* Process data */
+  while (cinfo.output_scanline < cinfo.output_height) {
+    num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
+					dest_mgr->buffer_height);
+    (*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
+  }
+
+#ifdef PROGRESS_REPORT
+  /* Hack: count final pass as done in case finish_output does an extra pass.
+   * The library won't have updated completed_passes.
+   */
+  progress.pub.completed_passes = progress.pub.total_passes;
+#endif
+
+  /* Finish decompression and release memory.
+   * I must do it in this order because output module has allocated memory
+   * of lifespan JPOOL_IMAGE; it needs to finish before releasing memory.
+   */
+  (*dest_mgr->finish_output) (&cinfo, dest_mgr);
+  (void) jpeg_finish_decompress(&cinfo);
+  jpeg_destroy_decompress(&cinfo);
+
+  /* Close files, if we opened them */
+  if (input_file != stdin)
+    fclose(input_file);
+  if (output_file != stdout)
+    fclose(output_file);
+
+#ifdef PROGRESS_REPORT
+  end_progress_monitor((j_common_ptr) &cinfo);
+#endif
+
+  /* All done. */
+  exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
+  return 0;			/* suppress no-return-value warnings */
+}

mozilla/jpeg/example.c

@@ -0,0 +1,433 @@
+/*
+ * example.c
+ *
+ * This file illustrates how to use the IJG code as a subroutine library
+ * to read or write JPEG image files.  You should look at this code in
+ * conjunction with the documentation file libjpeg.doc.
+ *
+ * This code will not do anything useful as-is, but it may be helpful as a
+ * skeleton for constructing routines that call the JPEG library.  
+ *
+ * We present these routines in the same coding style used in the JPEG code
+ * (ANSI function definitions, etc); but you are of course free to code your
+ * routines in a different style if you prefer.
+ */
+
+#include <stdio.h>
+
+/*
+ * Include file for users of JPEG library.
+ * You will need to have included system headers that define at least
+ * the typedefs FILE and size_t before you can include jpeglib.h.
+ * (stdio.h is sufficient on ANSI-conforming systems.)
+ * You may also wish to include "jerror.h".
+ */
+
+#include "jpeglib.h"
+
+/*
+ * <setjmp.h> is used for the optional error recovery mechanism shown in
+ * the second part of the example.
+ */
+
+#include <setjmp.h>
+
+
+
+/******************** JPEG COMPRESSION SAMPLE INTERFACE *******************/
+
+/* This half of the example shows how to feed data into the JPEG compressor.
+ * We present a minimal version that does not worry about refinements such
+ * as error recovery (the JPEG code will just exit() if it gets an error).
+ */
+
+
+/*
+ * IMAGE DATA FORMATS:
+ *
+ * The standard input image format is a rectangular array of pixels, with
+ * each pixel having the same number of "component" values (color channels).
+ * Each pixel row is an array of JSAMPLEs (which typically are unsigned chars).
+ * If you are working with color data, then the color values for each pixel
+ * must be adjacent in the row; for example, R,G,B,R,G,B,R,G,B,... for 24-bit
+ * RGB color.
+ *
+ * For this example, we'll assume that this data structure matches the way
+ * our application has stored the image in memory, so we can just pass a
+ * pointer to our image buffer.  In particular, let's say that the image is
+ * RGB color and is described by:
+ */
+
+extern JSAMPLE * image_buffer;	/* Points to large array of R,G,B-order data */
+extern int image_height;	/* Number of rows in image */
+extern int image_width;		/* Number of columns in image */
+
+
+/*
+ * Sample routine for JPEG compression.  We assume that the target file name
+ * and a compression quality factor are passed in.
+ */
+
+GLOBAL(void)
+write_JPEG_file (char * filename, int quality)
+{
+  /* This struct contains the JPEG compression parameters and pointers to
+   * working space (which is allocated as needed by the JPEG library).
+   * It is possible to have several such structures, representing multiple
+   * compression/decompression processes, in existence at once.  We refer
+   * to any one struct (and its associated working data) as a "JPEG object".
+   */
+  struct jpeg_compress_struct cinfo;
+  /* This struct represents a JPEG error handler.  It is declared separately
+   * because applications often want to supply a specialized error handler
+   * (see the second half of this file for an example).  But here we just
+   * take the easy way out and use the standard error handler, which will
+   * print a message on stderr and call exit() if compression fails.
+   * Note that this struct must live as long as the main JPEG parameter
+   * struct, to avoid dangling-pointer problems.
+   */
+  struct jpeg_error_mgr jerr;
+  /* More stuff */
+  FILE * outfile;		/* target file */
+  JSAMPROW row_pointer[1];	/* pointer to JSAMPLE row[s] */
+  int row_stride;		/* physical row width in image buffer */
+
+  /* Step 1: allocate and initialize JPEG compression object */
+
+  /* We have to set up the error handler first, in case the initialization
+   * step fails.  (Unlikely, but it could happen if you are out of memory.)
+   * This routine fills in the contents of struct jerr, and returns jerr's
+   * address which we place into the link field in cinfo.
+   */
+  cinfo.err = jpeg_std_error(&jerr);
+  /* Now we can initialize the JPEG compression object. */
+  jpeg_create_compress(&cinfo);
+
+  /* Step 2: specify data destination (eg, a file) */
+  /* Note: steps 2 and 3 can be done in either order. */
+
+  /* Here we use the library-supplied code to send compressed data to a
+   * stdio stream.  You can also write your own code to do something else.
+   * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
+   * requires it in order to write binary files.
+   */
+  if ((outfile = fopen(filename, "wb")) == NULL) {
+    fprintf(stderr, "can't open %s\n", filename);
+    exit(1);
+  }
+  jpeg_stdio_dest(&cinfo, outfile);
+
+  /* Step 3: set parameters for compression */
+
+  /* First we supply a description of the input image.
+   * Four fields of the cinfo struct must be filled in:
+   */
+  cinfo.image_width = image_width; 	/* image width and height, in pixels */
+  cinfo.image_height = image_height;
+  cinfo.input_components = 3;		/* # of color components per pixel */
+  cinfo.in_color_space = JCS_RGB; 	/* colorspace of input image */
+  /* Now use the library's routine to set default compression parameters.
+   * (You must set at least cinfo.in_color_space before calling this,
+   * since the defaults depend on the source color space.)
+   */
+  jpeg_set_defaults(&cinfo);
+  /* Now you can set any non-default parameters you wish to.
+   * Here we just illustrate the use of quality (quantization table) scaling:
+   */
+  jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */);
+
+  /* Step 4: Start compressor */
+
+  /* TRUE ensures that we will write a complete interchange-JPEG file.
+   * Pass TRUE unless you are very sure of what you're doing.
+   */
+  jpeg_start_compress(&cinfo, TRUE);
+
+  /* Step 5: while (scan lines remain to be written) */
+  /*           jpeg_write_scanlines(...); */
+
+  /* Here we use the library's state variable cinfo.next_scanline as the
+   * loop counter, so that we don't have to keep track ourselves.
+   * To keep things simple, we pass one scanline per call; you can pass
+   * more if you wish, though.
+   */
+  row_stride = image_width * 3;	/* JSAMPLEs per row in image_buffer */
+
+  while (cinfo.next_scanline < cinfo.image_height) {
+    /* jpeg_write_scanlines expects an array of pointers to scanlines.
+     * Here the array is only one element long, but you could pass
+     * more than one scanline at a time if that's more convenient.
+     */
+    row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride];
+    (void) jpeg_write_scanlines(&cinfo, row_pointer, 1);
+  }
+
+  /* Step 6: Finish compression */
+
+  jpeg_finish_compress(&cinfo);
+  /* After finish_compress, we can close the output file. */
+  fclose(outfile);
+
+  /* Step 7: release JPEG compression object */
+
+  /* This is an important step since it will release a good deal of memory. */
+  jpeg_destroy_compress(&cinfo);
+
+  /* And we're done! */
+}
+
+
+/*
+ * SOME FINE POINTS:
+ *
+ * In the above loop, we ignored the return value of jpeg_write_scanlines,
+ * which is the number of scanlines actually written.  We could get away
+ * with this because we were only relying on the value of cinfo.next_scanline,
+ * which will be incremented correctly.  If you maintain additional loop
+ * variables then you should be careful to increment them properly.
+ * Actually, for output to a stdio stream you needn't worry, because
+ * then jpeg_write_scanlines will write all the lines passed (or else exit
+ * with a fatal error).  Partial writes can only occur if you use a data
+ * destination module that can demand suspension of the compressor.
+ * (If you don't know what that's for, you don't need it.)
+ *
+ * If the compressor requires full-image buffers (for entropy-coding
+ * optimization or a multi-scan JPEG file), it will create temporary
+ * files for anything that doesn't fit within the maximum-memory setting.
+ * (Note that temp files are NOT needed if you use the default parameters.)
+ * On some systems you may need to set up a signal handler to ensure that
+ * temporary files are deleted if the program is interrupted.  See libjpeg.doc.
+ *
+ * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG
+ * files to be compatible with everyone else's.  If you cannot readily read
+ * your data in that order, you'll need an intermediate array to hold the
+ * image.  See rdtarga.c or rdbmp.c for examples of handling bottom-to-top
+ * source data using the JPEG code's internal virtual-array mechanisms.
+ */
+
+
+
+/******************** JPEG DECOMPRESSION SAMPLE INTERFACE *******************/
+
+/* This half of the example shows how to read data from the JPEG decompressor.
+ * It's a bit more refined than the above, in that we show:
+ *   (a) how to modify the JPEG library's standard error-reporting behavior;
+ *   (b) how to allocate workspace using the library's memory manager.
+ *
+ * Just to make this example a little different from the first one, we'll
+ * assume that we do not intend to put the whole image into an in-memory
+ * buffer, but to send it line-by-line someplace else.  We need a one-
+ * scanline-high JSAMPLE array as a work buffer, and we will let the JPEG
+ * memory manager allocate it for us.  This approach is actually quite useful
+ * because we don't need to remember to deallocate the buffer separately: it
+ * will go away automatically when the JPEG object is cleaned up.
+ */
+
+
+/*
+ * ERROR HANDLING:
+ *
+ * The JPEG library's standard error handler (jerror.c) is divided into
+ * several "methods" which you can override individually.  This lets you
+ * adjust the behavior without duplicating a lot of code, which you might
+ * have to update with each future release.
+ *
+ * Our example here shows how to override the "error_exit" method so that
+ * control is returned to the library's caller when a fatal error occurs,
+ * rather than calling exit() as the standard error_exit method does.
+ *
+ * We use C's setjmp/longjmp facility to return control.  This means that the
+ * routine which calls the JPEG library must first execute a setjmp() call to
+ * establish the return point.  We want the replacement error_exit to do a
+ * longjmp().  But we need to make the setjmp buffer accessible to the
+ * error_exit routine.  To do this, we make a private extension of the
+ * standard JPEG error handler object.  (If we were using C++, we'd say we
+ * were making a subclass of the regular error handler.)
+ *
+ * Here's the extended error handler struct:
+ */
+
+struct my_error_mgr {
+  struct jpeg_error_mgr pub;	/* "public" fields */
+
+  jmp_buf setjmp_buffer;	/* for return to caller */
+};
+
+typedef struct my_error_mgr * my_error_ptr;
+
+/*
+ * Here's the routine that will replace the standard error_exit method:
+ */
+
+METHODDEF(void)
+my_error_exit (j_common_ptr cinfo)
+{
+  /* cinfo->err really points to a my_error_mgr struct, so coerce pointer */
+  my_error_ptr myerr = (my_error_ptr) cinfo->err;
+
+  /* Always display the message. */
+  /* We could postpone this until after returning, if we chose. */
+  (*cinfo->err->output_message) (cinfo);
+
+  /* Return control to the setjmp point */
+  longjmp(myerr->setjmp_buffer, 1);
+}
+
+
+/*
+ * Sample routine for JPEG decompression.  We assume that the source file name
+ * is passed in.  We want to return 1 on success, 0 on error.
+ */
+
+
+GLOBAL(int)
+read_JPEG_file (char * filename)
+{
+  /* This struct contains the JPEG decompression parameters and pointers to
+   * working space (which is allocated as needed by the JPEG library).
+   */
+  struct jpeg_decompress_struct cinfo;
+  /* We use our private extension JPEG error handler.
+   * Note that this struct must live as long as the main JPEG parameter
+   * struct, to avoid dangling-pointer problems.
+   */
+  struct my_error_mgr jerr;
+  /* More stuff */
+  FILE * infile;		/* source file */
+  JSAMPARRAY buffer;		/* Output row buffer */
+  int row_stride;		/* physical row width in output buffer */
+
+  /* In this example we want to open the input file before doing anything else,
+   * so that the setjmp() error recovery below can assume the file is open.
+   * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
+   * requires it in order to read binary files.
+   */
+
+  if ((infile = fopen(filename, "rb")) == NULL) {
+    fprintf(stderr, "can't open %s\n", filename);
+    return 0;
+  }
+
+  /* Step 1: allocate and initialize JPEG decompression object */
+
+  /* We set up the normal JPEG error routines, then override error_exit. */
+  cinfo.err = jpeg_std_error(&jerr.pub);
+  jerr.pub.error_exit = my_error_exit;
+  /* Establish the setjmp return context for my_error_exit to use. */
+  if (setjmp(jerr.setjmp_buffer)) {
+    /* If we get here, the JPEG code has signaled an error.
+     * We need to clean up the JPEG object, close the input file, and return.
+     */
+    jpeg_destroy_decompress(&cinfo);
+    fclose(infile);
+    return 0;
+  }
+  /* Now we can initialize the JPEG decompression object. */
+  jpeg_create_decompress(&cinfo);
+
+  /* Step 2: specify data source (eg, a file) */
+
+  jpeg_stdio_src(&cinfo, infile);
+
+  /* Step 3: read file parameters with jpeg_read_header() */
+
+  (void) jpeg_read_header(&cinfo, TRUE);
+  /* We can ignore the return value from jpeg_read_header since
+   *   (a) suspension is not possible with the stdio data source, and
+   *   (b) we passed TRUE to reject a tables-only JPEG file as an error.
+   * See libjpeg.doc for more info.
+   */
+
+  /* Step 4: set parameters for decompression */
+
+  /* In this example, we don't need to change any of the defaults set by
+   * jpeg_read_header(), so we do nothing here.
+   */
+
+  /* Step 5: Start decompressor */
+
+  (void) jpeg_start_decompress(&cinfo);
+  /* We can ignore the return value since suspension is not possible
+   * with the stdio data source.
+   */
+
+  /* We may need to do some setup of our own at this point before reading
+   * the data.  After jpeg_start_decompress() we have the correct scaled
+   * output image dimensions available, as well as the output colormap
+   * if we asked for color quantization.
+   * In this example, we need to make an output work buffer of the right size.
+   */ 
+  /* JSAMPLEs per row in output buffer */
+  row_stride = cinfo.output_width * cinfo.output_components;
+  /* Make a one-row-high sample array that will go away when done with image */
+  buffer = (*cinfo.mem->alloc_sarray)
+		((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1);
+
+  /* Step 6: while (scan lines remain to be read) */
+  /*           jpeg_read_scanlines(...); */
+
+  /* Here we use the library's state variable cinfo.output_scanline as the
+   * loop counter, so that we don't have to keep track ourselves.
+   */
+  while (cinfo.output_scanline < cinfo.output_height) {
+    /* jpeg_read_scanlines expects an array of pointers to scanlines.
+     * Here the array is only one element long, but you could ask for
+     * more than one scanline at a time if that's more convenient.
+     */
+    (void) jpeg_read_scanlines(&cinfo, buffer, 1);
+    /* Assume put_scanline_someplace wants a pointer and sample count. */
+    put_scanline_someplace(buffer[0], row_stride);
+  }
+
+  /* Step 7: Finish decompression */
+
+  (void) jpeg_finish_decompress(&cinfo);
+  /* We can ignore the return value since suspension is not possible
+   * with the stdio data source.
+   */
+
+  /* Step 8: Release JPEG decompression object */
+
+  /* This is an important step since it will release a good deal of memory. */
+  jpeg_destroy_decompress(&cinfo);
+
+  /* After finish_decompress, we can close the input file.
+   * Here we postpone it until after no more JPEG errors are possible,
+   * so as to simplify the setjmp error logic above.  (Actually, I don't
+   * think that jpeg_destroy can do an error exit, but why assume anything...)
+   */
+  fclose(infile);
+
+  /* At this point you may want to check to see whether any corrupt-data
+   * warnings occurred (test whether jerr.pub.num_warnings is nonzero).
+   */
+
+  /* And we're done! */
+  return 1;
+}
+
+
+/*
+ * SOME FINE POINTS:
+ *
+ * In the above code, we ignored the return value of jpeg_read_scanlines,
+ * which is the number of scanlines actually read.  We could get away with
+ * this because we asked for only one line at a time and we weren't using
+ * a suspending data source.  See libjpeg.doc for more info.
+ *
+ * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress();
+ * we should have done it beforehand to ensure that the space would be
+ * counted against the JPEG max_memory setting.  In some systems the above
+ * code would risk an out-of-memory error.  However, in general we don't
+ * know the output image dimensions before jpeg_start_decompress(), unless we
+ * call jpeg_calc_output_dimensions().  See libjpeg.doc for more about this.
+ *
+ * Scanlines are returned in the same order as they appear in the JPEG file,
+ * which is standardly top-to-bottom.  If you must emit data bottom-to-top,
+ * you can use one of the virtual arrays provided by the JPEG memory manager
+ * to invert the data.  See wrbmp.c for an example.
+ *
+ * As with compression, some operating modes may require temporary files.
+ * On some systems you may need to set up a signal handler to ensure that
+ * temporary files are deleted if the program is interrupted.  See libjpeg.doc.
+ */

mozilla/jpeg/filelist.doc

@@ -0,0 +1,210 @@
+IJG JPEG LIBRARY:  FILE LIST
+
+Copyright (C) 1994-1998, Thomas G. Lane.
+This file is part of the Independent JPEG Group's software.
+For conditions of distribution and use, see the accompanying README file.
+
+
+Here is a road map to the files in the IJG JPEG distribution.  The
+distribution includes the JPEG library proper, plus two application
+programs ("cjpeg" and "djpeg") which use the library to convert JPEG
+files to and from some other popular image formats.  A third application
+"jpegtran" uses the library to do lossless conversion between different
+variants of JPEG.  There are also two stand-alone applications,
+"rdjpgcom" and "wrjpgcom".
+
+
+THE JPEG LIBRARY
+================
+
+Include files:
+
+jpeglib.h	JPEG library's exported data and function declarations.
+jconfig.h	Configuration declarations.  Note: this file is not present
+		in the distribution; it is generated during installation.
+jmorecfg.h	Additional configuration declarations; need not be changed
+		for a standard installation.
+jerror.h	Declares JPEG library's error and trace message codes.
+jinclude.h	Central include file used by all IJG .c files to reference
+		system include files.
+jpegint.h	JPEG library's internal data structures.
+jchuff.h	Private declarations for Huffman encoder modules.
+jdhuff.h	Private declarations for Huffman decoder modules.
+jdct.h		Private declarations for forward & reverse DCT subsystems.
+jmemsys.h	Private declarations for memory management subsystem.
+jversion.h	Version information.
+
+Applications using the library should include jpeglib.h (which in turn
+includes jconfig.h and jmorecfg.h).  Optionally, jerror.h may be included
+if the application needs to reference individual JPEG error codes.  The
+other include files are intended for internal use and would not normally
+be included by an application program.  (cjpeg/djpeg/etc do use jinclude.h,
+since its function is to improve portability of the whole IJG distribution.
+Most other applications will directly include the system include files they
+want, and hence won't need jinclude.h.)
+
+
+C source code files:
+
+These files contain most of the functions intended to be called directly by
+an application program:
+
+jcapimin.c	Application program interface: core routines for compression.
+jcapistd.c	Application program interface: standard compression.
+jdapimin.c	Application program interface: core routines for decompression.
+jdapistd.c	Application program interface: standard decompression.
+jcomapi.c	Application program interface routines common to compression
+		and decompression.
+jcparam.c	Compression parameter setting helper routines.
+jctrans.c	API and library routines for transcoding compression.
+jdtrans.c	API and library routines for transcoding decompression.
+
+Compression side of the library:
+
+jcinit.c	Initialization: determines which other modules to use.
+jcmaster.c	Master control: setup and inter-pass sequencing logic.
+jcmainct.c	Main buffer controller (preprocessor => JPEG compressor).
+jcprepct.c	Preprocessor buffer controller.
+jccoefct.c	Buffer controller for DCT coefficient buffer.
+jccolor.c	Color space conversion.
+jcsample.c	Downsampling.
+jcdctmgr.c	DCT manager (DCT implementation selection & control).
+jfdctint.c	Forward DCT using slow-but-accurate integer method.
+jfdctfst.c	Forward DCT using faster, less accurate integer method.
+jfdctflt.c	Forward DCT using floating-point arithmetic.
+jchuff.c	Huffman entropy coding for sequential JPEG.
+jcphuff.c	Huffman entropy coding for progressive JPEG.
+jcmarker.c	JPEG marker writing.
+jdatadst.c	Data destination manager for stdio output.
+
+Decompression side of the library:
+
+jdmaster.c	Master control: determines which other modules to use.
+jdinput.c	Input controller: controls input processing modules.
+jdmainct.c	Main buffer controller (JPEG decompressor => postprocessor).
+jdcoefct.c	Buffer controller for DCT coefficient buffer.
+jdpostct.c	Postprocessor buffer controller.
+jdmarker.c	JPEG marker reading.
+jdhuff.c	Huffman entropy decoding for sequential JPEG.
+jdphuff.c	Huffman entropy decoding for progressive JPEG.
+jddctmgr.c	IDCT manager (IDCT implementation selection & control).
+jidctint.c	Inverse DCT using slow-but-accurate integer method.
+jidctfst.c	Inverse DCT using faster, less accurate integer method.
+jidctflt.c	Inverse DCT using floating-point arithmetic.
+jidctred.c	Inverse DCTs with reduced-size outputs.
+jdsample.c	Upsampling.
+jdcolor.c	Color space conversion.
+jdmerge.c	Merged upsampling/color conversion (faster, lower quality).
+jquant1.c	One-pass color quantization using a fixed-spacing colormap.
+jquant2.c	Two-pass color quantization using a custom-generated colormap.
+		Also handles one-pass quantization to an externally given map.
+jdatasrc.c	Data source manager for stdio input.
+
+Support files for both compression and decompression:
+
+jerror.c	Standard error handling routines (application replaceable).
+jmemmgr.c	System-independent (more or less) memory management code.
+jutils.c	Miscellaneous utility routines.
+
+jmemmgr.c relies on a system-dependent memory management module.  The IJG
+distribution includes the following implementations of the system-dependent
+module:
+
+jmemnobs.c	"No backing store": assumes adequate virtual memory exists.
+jmemansi.c	Makes temporary files with ANSI-standard routine tmpfile().
+jmemname.c	Makes temporary files with program-generated file names.
+jmemdos.c	Custom implementation for MS-DOS (16-bit environment only):
+		can use extended and expanded memory as well as temp files.
+jmemmac.c	Custom implementation for Apple Macintosh.
+
+Exactly one of the system-dependent modules should be configured into an
+installed JPEG library (see install.doc for hints about which one to use).
+On unusual systems you may find it worthwhile to make a special
+system-dependent memory manager.
+
+
+Non-C source code files:
+
+jmemdosa.asm	80x86 assembly code support for jmemdos.c; used only in
+		MS-DOS-specific configurations of the JPEG library.
+
+
+CJPEG/DJPEG/JPEGTRAN
+====================
+
+Include files:
+
+cdjpeg.h	Declarations shared by cjpeg/djpeg/jpegtran modules.
+cderror.h	Additional error and trace message codes for cjpeg et al.
+transupp.h	Declarations for jpegtran support routines in transupp.c.
+
+C source code files:
+
+cjpeg.c		Main program for cjpeg.
+djpeg.c		Main program for djpeg.
+jpegtran.c	Main program for jpegtran.
+cdjpeg.c	Utility routines used by all three programs.
+rdcolmap.c	Code to read a colormap file for djpeg's "-map" switch.
+rdswitch.c	Code to process some of cjpeg's more complex switches.
+		Also used by jpegtran.
+transupp.c	Support code for jpegtran: lossless image manipulations.
+
+Image file reader modules for cjpeg:
+
+rdbmp.c		BMP file input.
+rdgif.c		GIF file input (now just a stub).
+rdppm.c		PPM/PGM file input.
+rdrle.c		Utah RLE file input.
+rdtarga.c	Targa file input.
+
+Image file writer modules for djpeg:
+
+wrbmp.c		BMP file output.
+wrgif.c		GIF file output (a mere shadow of its former self).
+wrppm.c		PPM/PGM file output.
+wrrle.c		Utah RLE file output.
+wrtarga.c	Targa file output.
+
+
+RDJPGCOM/WRJPGCOM
+=================
+
+C source code files:
+
+rdjpgcom.c	Stand-alone rdjpgcom application.
+wrjpgcom.c	Stand-alone wrjpgcom application.
+
+These programs do not depend on the IJG library.  They do use
+jconfig.h and jinclude.h, only to improve portability.
+
+
+ADDITIONAL FILES
+================
+
+Documentation (see README for a guide to the documentation files):
+
+README		Master documentation file.
+*.doc		Other documentation files.
+*.1		Documentation in Unix man page format.
+change.log	Version-to-version change highlights.
+example.c	Sample code for calling JPEG library.
+
+Configuration/installation files and programs (see install.doc for more info):
+
+configure	Unix shell script to perform automatic configuration.
+ltconfig	Support scripts for configure (from GNU libtool).
+ltmain.sh
+config.guess
+config.sub
+install-sh	Install shell script for those Unix systems lacking one.
+ckconfig.c	Program to generate jconfig.h on non-Unix systems.
+jconfig.doc	Template for making jconfig.h by hand.
+makefile.*	Sample makefiles for particular systems.
+jconfig.*	Sample jconfig.h for particular systems.
+ansi2knr.c	De-ANSIfier for pre-ANSI C compilers (courtesy of
+		L. Peter Deutsch and Aladdin Enterprises).
+
+Test files (see install.doc for test procedure):
+
+test*.*		Source and comparison files for confidence test.
+		These are binary image files, NOT text files.

mozilla/jpeg/jcapimin.c

@@ -0,0 +1,280 @@
+/*
+ * jcapimin.c
+ *
+ * Copyright (C) 1994-1998, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains application interface code for the compression half
+ * of the JPEG library.  These are the "minimum" API routines that may be
+ * needed in either the normal full-compression case or the transcoding-only
+ * case.
+ *
+ * Most of the routines intended to be called directly by an application
+ * are in this file or in jcapistd.c.  But also see jcparam.c for
+ * parameter-setup helper routines, jcomapi.c for routines shared by
+ * compression and decompression, and jctrans.c for the transcoding case.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * Initialization of a JPEG compression object.
+ * The error manager must already be set up (in case memory manager fails).
+ */
+
+GLOBAL(void)
+jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize)
+{
+  int i;
+
+  /* Guard against version mismatches between library and caller. */
+  cinfo->mem = NULL;		/* so jpeg_destroy knows mem mgr not called */
+  if (version != JPEG_LIB_VERSION)
+    ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version);
+  if (structsize != SIZEOF(struct jpeg_compress_struct))
+    ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, 
+	     (int) SIZEOF(struct jpeg_compress_struct), (int) structsize);
+
+  /* For debugging purposes, we zero the whole master structure.
+   * But the application has already set the err pointer, and may have set
+   * client_data, so we have to save and restore those fields.
+   * Note: if application hasn't set client_data, tools like Purify may
+   * complain here.
+   */
+  {
+    struct jpeg_error_mgr * err = cinfo->err;
+    void * client_data = cinfo->client_data; /* ignore Purify complaint here */
+    MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct));
+    cinfo->err = err;
+    cinfo->client_data = client_data;
+  }
+  cinfo->is_decompressor = FALSE;
+
+  /* Initialize a memory manager instance for this object */
+  jinit_memory_mgr((j_common_ptr) cinfo);
+
+  /* Zero out pointers to permanent structures. */
+  cinfo->progress = NULL;
+  cinfo->dest = NULL;
+
+  cinfo->comp_info = NULL;
+
+  for (i = 0; i < NUM_QUANT_TBLS; i++)
+    cinfo->quant_tbl_ptrs[i] = NULL;
+
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    cinfo->dc_huff_tbl_ptrs[i] = NULL;
+    cinfo->ac_huff_tbl_ptrs[i] = NULL;
+  }
+
+  cinfo->script_space = NULL;
+
+  cinfo->input_gamma = 1.0;	/* in case application forgets */
+
+  /* OK, I'm ready */
+  cinfo->global_state = CSTATE_START;
+}
+
+
+/*
+ * Destruction of a JPEG compression object
+ */
+
+GLOBAL(void)
+jpeg_destroy_compress (j_compress_ptr cinfo)
+{
+  jpeg_destroy((j_common_ptr) cinfo); /* use common routine */
+}
+
+
+/*
+ * Abort processing of a JPEG compression operation,
+ * but don't destroy the object itself.
+ */
+
+GLOBAL(void)
+jpeg_abort_compress (j_compress_ptr cinfo)
+{
+  jpeg_abort((j_common_ptr) cinfo); /* use common routine */
+}
+
+
+/*
+ * Forcibly suppress or un-suppress all quantization and Huffman tables.
+ * Marks all currently defined tables as already written (if suppress)
+ * or not written (if !suppress).  This will control whether they get emitted
+ * by a subsequent jpeg_start_compress call.
+ *
+ * This routine is exported for use by applications that want to produce
+ * abbreviated JPEG datastreams.  It logically belongs in jcparam.c, but
+ * since it is called by jpeg_start_compress, we put it here --- otherwise
+ * jcparam.o would be linked whether the application used it or not.
+ */
+
+GLOBAL(void)
+jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress)
+{
+  int i;
+  JQUANT_TBL * qtbl;
+  JHUFF_TBL * htbl;
+
+  for (i = 0; i < NUM_QUANT_TBLS; i++) {
+    if ((qtbl = cinfo->quant_tbl_ptrs[i]) != NULL)
+      qtbl->sent_table = suppress;
+  }
+
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    if ((htbl = cinfo->dc_huff_tbl_ptrs[i]) != NULL)
+      htbl->sent_table = suppress;
+    if ((htbl = cinfo->ac_huff_tbl_ptrs[i]) != NULL)
+      htbl->sent_table = suppress;
+  }
+}
+
+
+/*
+ * Finish JPEG compression.
+ *
+ * If a multipass operating mode was selected, this may do a great deal of
+ * work including most of the actual output.
+ */
+
+GLOBAL(void)
+jpeg_finish_compress (j_compress_ptr cinfo)
+{
+  JDIMENSION iMCU_row;
+
+  if (cinfo->global_state == CSTATE_SCANNING ||
+      cinfo->global_state == CSTATE_RAW_OK) {
+    /* Terminate first pass */
+    if (cinfo->next_scanline < cinfo->image_height)
+      ERREXIT(cinfo, JERR_TOO_LITTLE_DATA);
+    (*cinfo->master->finish_pass) (cinfo);
+  } else if (cinfo->global_state != CSTATE_WRCOEFS)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  /* Perform any remaining passes */
+  while (! cinfo->master->is_last_pass) {
+    (*cinfo->master->prepare_for_pass) (cinfo);
+    for (iMCU_row = 0; iMCU_row < cinfo->total_iMCU_rows; iMCU_row++) {
+      if (cinfo->progress != NULL) {
+	cinfo->progress->pass_counter = (long) iMCU_row;
+	cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows;
+	(*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+      }
+      /* We bypass the main controller and invoke coef controller directly;
+       * all work is being done from the coefficient buffer.
+       */
+      if (! (*cinfo->coef->compress_data) (cinfo, (JSAMPIMAGE) NULL))
+	ERREXIT(cinfo, JERR_CANT_SUSPEND);
+    }
+    (*cinfo->master->finish_pass) (cinfo);
+  }
+  /* Write EOI, do final cleanup */
+  (*cinfo->marker->write_file_trailer) (cinfo);
+  (*cinfo->dest->term_destination) (cinfo);
+  /* We can use jpeg_abort to release memory and reset global_state */
+  jpeg_abort((j_common_ptr) cinfo);
+}
+
+
+/*
+ * Write a special marker.
+ * This is only recommended for writing COM or APPn markers.
+ * Must be called after jpeg_start_compress() and before
+ * first call to jpeg_write_scanlines() or jpeg_write_raw_data().
+ */
+
+GLOBAL(void)
+jpeg_write_marker (j_compress_ptr cinfo, int marker,
+		   const JOCTET *dataptr, unsigned int datalen)
+{
+  JMETHOD(void, write_marker_byte, (j_compress_ptr info, int val));
+
+  if (cinfo->next_scanline != 0 ||
+      (cinfo->global_state != CSTATE_SCANNING &&
+       cinfo->global_state != CSTATE_RAW_OK &&
+       cinfo->global_state != CSTATE_WRCOEFS))
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  (*cinfo->marker->write_marker_header) (cinfo, marker, datalen);
+  write_marker_byte = cinfo->marker->write_marker_byte;	/* copy for speed */
+  while (datalen--) {
+    (*write_marker_byte) (cinfo, *dataptr);
+    dataptr++;
+  }
+}
+
+/* Same, but piecemeal. */
+
+GLOBAL(void)
+jpeg_write_m_header (j_compress_ptr cinfo, int marker, unsigned int datalen)
+{
+  if (cinfo->next_scanline != 0 ||
+      (cinfo->global_state != CSTATE_SCANNING &&
+       cinfo->global_state != CSTATE_RAW_OK &&
+       cinfo->global_state != CSTATE_WRCOEFS))
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  (*cinfo->marker->write_marker_header) (cinfo, marker, datalen);
+}
+
+GLOBAL(void)
+jpeg_write_m_byte (j_compress_ptr cinfo, int val)
+{
+  (*cinfo->marker->write_marker_byte) (cinfo, val);
+}
+
+
+/*
+ * Alternate compression function: just write an abbreviated table file.
+ * Before calling this, all parameters and a data destination must be set up.
+ *
+ * To produce a pair of files containing abbreviated tables and abbreviated
+ * image data, one would proceed as follows:
+ *
+ *		initialize JPEG object
+ *		set JPEG parameters
+ *		set destination to table file
+ *		jpeg_write_tables(cinfo);
+ *		set destination to image file
+ *		jpeg_start_compress(cinfo, FALSE);
+ *		write data...
+ *		jpeg_finish_compress(cinfo);
+ *
+ * jpeg_write_tables has the side effect of marking all tables written
+ * (same as jpeg_suppress_tables(..., TRUE)).  Thus a subsequent start_compress
+ * will not re-emit the tables unless it is passed write_all_tables=TRUE.
+ */
+
+GLOBAL(void)
+jpeg_write_tables (j_compress_ptr cinfo)
+{
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  /* (Re)initialize error mgr and destination modules */
+  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
+  (*cinfo->dest->init_destination) (cinfo);
+  /* Initialize the marker writer ... bit of a crock to do it here. */
+  jinit_marker_writer(cinfo);
+  /* Write them tables! */
+  (*cinfo->marker->write_tables_only) (cinfo);
+  /* And clean up. */
+  (*cinfo->dest->term_destination) (cinfo);
+  /*
+   * In library releases up through v6a, we called jpeg_abort() here to free
+   * any working memory allocated by the destination manager and marker
+   * writer.  Some applications had a problem with that: they allocated space
+   * of their own from the library memory manager, and didn't want it to go
+   * away during write_tables.  So now we do nothing.  This will cause a
+   * memory leak if an app calls write_tables repeatedly without doing a full
+   * compression cycle or otherwise resetting the JPEG object.  However, that
+   * seems less bad than unexpectedly freeing memory in the normal case.
+   * An app that prefers the old behavior can call jpeg_abort for itself after
+   * each call to jpeg_write_tables().
+   */
+}

mozilla/jpeg/jcapistd.c

@@ -0,0 +1,161 @@
+/*
+ * jcapistd.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains application interface code for the compression half
+ * of the JPEG library.  These are the "standard" API routines that are
+ * used in the normal full-compression case.  They are not used by a
+ * transcoding-only application.  Note that if an application links in
+ * jpeg_start_compress, it will end up linking in the entire compressor.
+ * We thus must separate this file from jcapimin.c to avoid linking the
+ * whole compression library into a transcoder.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * Compression initialization.
+ * Before calling this, all parameters and a data destination must be set up.
+ *
+ * We require a write_all_tables parameter as a failsafe check when writing
+ * multiple datastreams from the same compression object.  Since prior runs
+ * will have left all the tables marked sent_table=TRUE, a subsequent run
+ * would emit an abbreviated stream (no tables) by default.  This may be what
+ * is wanted, but for safety's sake it should not be the default behavior:
+ * programmers should have to make a deliberate choice to emit abbreviated
+ * images.  Therefore the documentation and examples should encourage people
+ * to pass write_all_tables=TRUE; then it will take active thought to do the
+ * wrong thing.
+ */
+
+GLOBAL(void)
+jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables)
+{
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  if (write_all_tables)
+    jpeg_suppress_tables(cinfo, FALSE);	/* mark all tables to be written */
+
+  /* (Re)initialize error mgr and destination modules */
+  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
+  (*cinfo->dest->init_destination) (cinfo);
+  /* Perform master selection of active modules */
+  jinit_compress_master(cinfo);
+  /* Set up for the first pass */
+  (*cinfo->master->prepare_for_pass) (cinfo);
+  /* Ready for application to drive first pass through jpeg_write_scanlines
+   * or jpeg_write_raw_data.
+   */
+  cinfo->next_scanline = 0;
+  cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING);
+}
+
+
+/*
+ * Write some scanlines of data to the JPEG compressor.
+ *
+ * The return value will be the number of lines actually written.
+ * This should be less than the supplied num_lines only in case that
+ * the data destination module has requested suspension of the compressor,
+ * or if more than image_height scanlines are passed in.
+ *
+ * Note: we warn about excess calls to jpeg_write_scanlines() since
+ * this likely signals an application programmer error.  However,
+ * excess scanlines passed in the last valid call are *silently* ignored,
+ * so that the application need not adjust num_lines for end-of-image
+ * when using a multiple-scanline buffer.
+ */
+
+GLOBAL(JDIMENSION)
+jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines,
+		      JDIMENSION num_lines)
+{
+  JDIMENSION row_ctr, rows_left;
+
+  if (cinfo->global_state != CSTATE_SCANNING)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  if (cinfo->next_scanline >= cinfo->image_height)
+    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
+
+  /* Call progress monitor hook if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->pass_counter = (long) cinfo->next_scanline;
+    cinfo->progress->pass_limit = (long) cinfo->image_height;
+    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+  }
+
+  /* Give master control module another chance if this is first call to
+   * jpeg_write_scanlines.  This lets output of the frame/scan headers be
+   * delayed so that application can write COM, etc, markers between
+   * jpeg_start_compress and jpeg_write_scanlines.
+   */
+  if (cinfo->master->call_pass_startup)
+    (*cinfo->master->pass_startup) (cinfo);
+
+  /* Ignore any extra scanlines at bottom of image. */
+  rows_left = cinfo->image_height - cinfo->next_scanline;
+  if (num_lines > rows_left)
+    num_lines = rows_left;
+
+  row_ctr = 0;
+  (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines);
+  cinfo->next_scanline += row_ctr;
+  return row_ctr;
+}
+
+
+/*
+ * Alternate entry point to write raw data.
+ * Processes exactly one iMCU row per call, unless suspended.
+ */
+
+GLOBAL(JDIMENSION)
+jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data,
+		     JDIMENSION num_lines)
+{
+  JDIMENSION lines_per_iMCU_row;
+
+  if (cinfo->global_state != CSTATE_RAW_OK)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  if (cinfo->next_scanline >= cinfo->image_height) {
+    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
+    return 0;
+  }
+
+  /* Call progress monitor hook if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->pass_counter = (long) cinfo->next_scanline;
+    cinfo->progress->pass_limit = (long) cinfo->image_height;
+    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+  }
+
+  /* Give master control module another chance if this is first call to
+   * jpeg_write_raw_data.  This lets output of the frame/scan headers be
+   * delayed so that application can write COM, etc, markers between
+   * jpeg_start_compress and jpeg_write_raw_data.
+   */
+  if (cinfo->master->call_pass_startup)
+    (*cinfo->master->pass_startup) (cinfo);
+
+  /* Verify that at least one iMCU row has been passed. */
+  lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
+  if (num_lines < lines_per_iMCU_row)
+    ERREXIT(cinfo, JERR_BUFFER_SIZE);
+
+  /* Directly compress the row. */
+  if (! (*cinfo->coef->compress_data) (cinfo, data)) {
+    /* If compressor did not consume the whole row, suspend processing. */
+    return 0;
+  }
+
+  /* OK, we processed one iMCU row. */
+  cinfo->next_scanline += lines_per_iMCU_row;
+  return lines_per_iMCU_row;
+}

mozilla/jpeg/jccoefct.c

@@ -0,0 +1,449 @@
+/*
+ * jccoefct.c
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the coefficient buffer controller for compression.
+ * This controller is the top level of the JPEG compressor proper.
+ * The coefficient buffer lies between forward-DCT and entropy encoding steps.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* We use a full-image coefficient buffer when doing Huffman optimization,
+ * and also for writing multiple-scan JPEG files.  In all cases, the DCT
+ * step is run during the first pass, and subsequent passes need only read
+ * the buffered coefficients.
+ */
+#ifdef ENTROPY_OPT_SUPPORTED
+#define FULL_COEF_BUFFER_SUPPORTED
+#else
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+#define FULL_COEF_BUFFER_SUPPORTED
+#endif
+#endif
+
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_c_coef_controller pub; /* public fields */
+
+  JDIMENSION iMCU_row_num;	/* iMCU row # within image */
+  JDIMENSION mcu_ctr;		/* counts MCUs processed in current row */
+  int MCU_vert_offset;		/* counts MCU rows within iMCU row */
+  int MCU_rows_per_iMCU_row;	/* number of such rows needed */
+
+  /* For single-pass compression, it's sufficient to buffer just one MCU
+   * (although this may prove a bit slow in practice).  We allocate a
+   * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each
+   * MCU constructed and sent.  (On 80x86, the workspace is FAR even though
+   * it's not really very big; this is to keep the module interfaces unchanged
+   * when a large coefficient buffer is necessary.)
+   * In multi-pass modes, this array points to the current MCU's blocks
+   * within the virtual arrays.
+   */
+  JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU];
+
+  /* In multi-pass modes, we need a virtual block array for each component. */
+  jvirt_barray_ptr whole_image[MAX_COMPONENTS];
+} my_coef_controller;
+
+typedef my_coef_controller * my_coef_ptr;
+
+
+/* Forward declarations */
+METHODDEF(boolean) compress_data
+    JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
+#ifdef FULL_COEF_BUFFER_SUPPORTED
+METHODDEF(boolean) compress_first_pass
+    JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
+METHODDEF(boolean) compress_output
+    JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
+#endif
+
+
+LOCAL(void)
+start_iMCU_row (j_compress_ptr cinfo)
+/* Reset within-iMCU-row counters for a new row */
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+
+  /* In an interleaved scan, an MCU row is the same as an iMCU row.
+   * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
+   * But at the bottom of the image, process only what's left.
+   */
+  if (cinfo->comps_in_scan > 1) {
+    coef->MCU_rows_per_iMCU_row = 1;
+  } else {
+    if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1))
+      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
+    else
+      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
+  }
+
+  coef->mcu_ctr = 0;
+  coef->MCU_vert_offset = 0;
+}
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF(void)
+start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+
+  coef->iMCU_row_num = 0;
+  start_iMCU_row(cinfo);
+
+  switch (pass_mode) {
+  case JBUF_PASS_THRU:
+    if (coef->whole_image[0] != NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    coef->pub.compress_data = compress_data;
+    break;
+#ifdef FULL_COEF_BUFFER_SUPPORTED
+  case JBUF_SAVE_AND_PASS:
+    if (coef->whole_image[0] == NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    coef->pub.compress_data = compress_first_pass;
+    break;
+  case JBUF_CRANK_DEST:
+    if (coef->whole_image[0] == NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    coef->pub.compress_data = compress_output;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    break;
+  }
+}
+
+
+/*
+ * Process some data in the single-pass case.
+ * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
+ * per call, ie, v_samp_factor block rows for each component in the image.
+ * Returns TRUE if the iMCU row is completed, FALSE if suspended.
+ *
+ * NB: input_buf contains a plane for each component in image,
+ * which we index according to the component's SOF position.
+ */
+
+METHODDEF(boolean)
+compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION MCU_col_num;	/* index of current MCU within row */
+  JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  int blkn, bi, ci, yindex, yoffset, blockcnt;
+  JDIMENSION ypos, xpos;
+  jpeg_component_info *compptr;
+
+  /* Loop to write as much as one whole iMCU row */
+  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
+       yoffset++) {
+    for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col;
+	 MCU_col_num++) {
+      /* Determine where data comes from in input_buf and do the DCT thing.
+       * Each call on forward_DCT processes a horizontal row of DCT blocks
+       * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks
+       * sequentially.  Dummy blocks at the right or bottom edge are filled in
+       * specially.  The data in them does not matter for image reconstruction,
+       * so we fill them with values that will encode to the smallest amount of
+       * data, viz: all zeroes in the AC entries, DC entries equal to previous
+       * block's DC value.  (Thanks to Thomas Kinsman for this idea.)
+       */
+      blkn = 0;
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+	compptr = cinfo->cur_comp_info[ci];
+	blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
+						: compptr->last_col_width;
+	xpos = MCU_col_num * compptr->MCU_sample_width;
+	ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */
+	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+	  if (coef->iMCU_row_num < last_iMCU_row ||
+	      yoffset+yindex < compptr->last_row_height) {
+	    (*cinfo->fdct->forward_DCT) (cinfo, compptr,
+					 input_buf[compptr->component_index],
+					 coef->MCU_buffer[blkn],
+					 ypos, xpos, (JDIMENSION) blockcnt);
+	    if (blockcnt < compptr->MCU_width) {
+	      /* Create some dummy blocks at the right edge of the image. */
+	      jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt],
+			(compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK));
+	      for (bi = blockcnt; bi < compptr->MCU_width; bi++) {
+		coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0];
+	      }
+	    }
+	  } else {
+	    /* Create a row of dummy blocks at the bottom of the image. */
+	    jzero_far((void FAR *) coef->MCU_buffer[blkn],
+		      compptr->MCU_width * SIZEOF(JBLOCK));
+	    for (bi = 0; bi < compptr->MCU_width; bi++) {
+	      coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0];
+	    }
+	  }
+	  blkn += compptr->MCU_width;
+	  ypos += DCTSIZE;
+	}
+      }
+      /* Try to write the MCU.  In event of a suspension failure, we will
+       * re-DCT the MCU on restart (a bit inefficient, could be fixed...)
+       */
+      if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) {
+	/* Suspension forced; update state counters and exit */
+	coef->MCU_vert_offset = yoffset;
+	coef->mcu_ctr = MCU_col_num;
+	return FALSE;
+      }
+    }
+    /* Completed an MCU row, but perhaps not an iMCU row */
+    coef->mcu_ctr = 0;
+  }
+  /* Completed the iMCU row, advance counters for next one */
+  coef->iMCU_row_num++;
+  start_iMCU_row(cinfo);
+  return TRUE;
+}
+
+
+#ifdef FULL_COEF_BUFFER_SUPPORTED
+
+/*
+ * Process some data in the first pass of a multi-pass case.
+ * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
+ * per call, ie, v_samp_factor block rows for each component in the image.
+ * This amount of data is read from the source buffer, DCT'd and quantized,
+ * and saved into the virtual arrays.  We also generate suitable dummy blocks
+ * as needed at the right and lower edges.  (The dummy blocks are constructed
+ * in the virtual arrays, which have been padded appropriately.)  This makes
+ * it possible for subsequent passes not to worry about real vs. dummy blocks.
+ *
+ * We must also emit the data to the entropy encoder.  This is conveniently
+ * done by calling compress_output() after we've loaded the current strip
+ * of the virtual arrays.
+ *
+ * NB: input_buf contains a plane for each component in image.  All
+ * components are DCT'd and loaded into the virtual arrays in this pass.
+ * However, it may be that only a subset of the components are emitted to
+ * the entropy encoder during this first pass; be careful about looking
+ * at the scan-dependent variables (MCU dimensions, etc).
+ */
+
+METHODDEF(boolean)
+compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  JDIMENSION blocks_across, MCUs_across, MCUindex;
+  int bi, ci, h_samp_factor, block_row, block_rows, ndummy;
+  JCOEF lastDC;
+  jpeg_component_info *compptr;
+  JBLOCKARRAY buffer;
+  JBLOCKROW thisblockrow, lastblockrow;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Align the virtual buffer for this component. */
+    buffer = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr) cinfo, coef->whole_image[ci],
+       coef->iMCU_row_num * compptr->v_samp_factor,
+       (JDIMENSION) compptr->v_samp_factor, TRUE);
+    /* Count non-dummy DCT block rows in this iMCU row. */
+    if (coef->iMCU_row_num < last_iMCU_row)
+      block_rows = compptr->v_samp_factor;
+    else {
+      /* NB: can't use last_row_height here, since may not be set! */
+      block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
+      if (block_rows == 0) block_rows = compptr->v_samp_factor;
+    }
+    blocks_across = compptr->width_in_blocks;
+    h_samp_factor = compptr->h_samp_factor;
+    /* Count number of dummy blocks to be added at the right margin. */
+    ndummy = (int) (blocks_across % h_samp_factor);
+    if (ndummy > 0)
+      ndummy = h_samp_factor - ndummy;
+    /* Perform DCT for all non-dummy blocks in this iMCU row.  Each call
+     * on forward_DCT processes a complete horizontal row of DCT blocks.
+     */
+    for (block_row = 0; block_row < block_rows; block_row++) {
+      thisblockrow = buffer[block_row];
+      (*cinfo->fdct->forward_DCT) (cinfo, compptr,
+				   input_buf[ci], thisblockrow,
+				   (JDIMENSION) (block_row * DCTSIZE),
+				   (JDIMENSION) 0, blocks_across);
+      if (ndummy > 0) {
+	/* Create dummy blocks at the right edge of the image. */
+	thisblockrow += blocks_across; /* => first dummy block */
+	jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK));
+	lastDC = thisblockrow[-1][0];
+	for (bi = 0; bi < ndummy; bi++) {
+	  thisblockrow[bi][0] = lastDC;
+	}
+      }
+    }
+    /* If at end of image, create dummy block rows as needed.
+     * The tricky part here is that within each MCU, we want the DC values
+     * of the dummy blocks to match the last real block's DC value.
+     * This squeezes a few more bytes out of the resulting file...
+     */
+    if (coef->iMCU_row_num == last_iMCU_row) {
+      blocks_across += ndummy;	/* include lower right corner */
+      MCUs_across = blocks_across / h_samp_factor;
+      for (block_row = block_rows; block_row < compptr->v_samp_factor;
+	   block_row++) {
+	thisblockrow = buffer[block_row];
+	lastblockrow = buffer[block_row-1];
+	jzero_far((void FAR *) thisblockrow,
+		  (size_t) (blocks_across * SIZEOF(JBLOCK)));
+	for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) {
+	  lastDC = lastblockrow[h_samp_factor-1][0];
+	  for (bi = 0; bi < h_samp_factor; bi++) {
+	    thisblockrow[bi][0] = lastDC;
+	  }
+	  thisblockrow += h_samp_factor; /* advance to next MCU in row */
+	  lastblockrow += h_samp_factor;
+	}
+      }
+    }
+  }
+  /* NB: compress_output will increment iMCU_row_num if successful.
+   * A suspension return will result in redoing all the work above next time.
+   */
+
+  /* Emit data to the entropy encoder, sharing code with subsequent passes */
+  return compress_output(cinfo, input_buf);
+}
+
+
+/*
+ * Process some data in subsequent passes of a multi-pass case.
+ * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
+ * per call, ie, v_samp_factor block rows for each component in the scan.
+ * The data is obtained from the virtual arrays and fed to the entropy coder.
+ * Returns TRUE if the iMCU row is completed, FALSE if suspended.
+ *
+ * NB: input_buf is ignored; it is likely to be a NULL pointer.
+ */
+
+METHODDEF(boolean)
+compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION MCU_col_num;	/* index of current MCU within row */
+  int blkn, ci, xindex, yindex, yoffset;
+  JDIMENSION start_col;
+  JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
+  JBLOCKROW buffer_ptr;
+  jpeg_component_info *compptr;
+
+  /* Align the virtual buffers for the components used in this scan.
+   * NB: during first pass, this is safe only because the buffers will
+   * already be aligned properly, so jmemmgr.c won't need to do any I/O.
+   */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    buffer[ci] = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
+       coef->iMCU_row_num * compptr->v_samp_factor,
+       (JDIMENSION) compptr->v_samp_factor, FALSE);
+  }
+
+  /* Loop to process one whole iMCU row */
+  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
+       yoffset++) {
+    for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row;
+	 MCU_col_num++) {
+      /* Construct list of pointers to DCT blocks belonging to this MCU */
+      blkn = 0;			/* index of current DCT block within MCU */
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+	compptr = cinfo->cur_comp_info[ci];
+	start_col = MCU_col_num * compptr->MCU_width;
+	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+	  buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
+	  for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
+	    coef->MCU_buffer[blkn++] = buffer_ptr++;
+	  }
+	}
+      }
+      /* Try to write the MCU. */
+      if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) {
+	/* Suspension forced; update state counters and exit */
+	coef->MCU_vert_offset = yoffset;
+	coef->mcu_ctr = MCU_col_num;
+	return FALSE;
+      }
+    }
+    /* Completed an MCU row, but perhaps not an iMCU row */
+    coef->mcu_ctr = 0;
+  }
+  /* Completed the iMCU row, advance counters for next one */
+  coef->iMCU_row_num++;
+  start_iMCU_row(cinfo);
+  return TRUE;
+}
+
+#endif /* FULL_COEF_BUFFER_SUPPORTED */
+
+
+/*
+ * Initialize coefficient buffer controller.
+ */
+
+GLOBAL(void)
+jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer)
+{
+  my_coef_ptr coef;
+
+  coef = (my_coef_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_coef_controller));
+  cinfo->coef = (struct jpeg_c_coef_controller *) coef;
+  coef->pub.start_pass = start_pass_coef;
+
+  /* Create the coefficient buffer. */
+  if (need_full_buffer) {
+#ifdef FULL_COEF_BUFFER_SUPPORTED
+    /* Allocate a full-image virtual array for each component, */
+    /* padded to a multiple of samp_factor DCT blocks in each direction. */
+    int ci;
+    jpeg_component_info *compptr;
+
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      coef->whole_image[ci] = (*cinfo->mem->request_virt_barray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+	 (JDIMENSION) jround_up((long) compptr->width_in_blocks,
+				(long) compptr->h_samp_factor),
+	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
+				(long) compptr->v_samp_factor),
+	 (JDIMENSION) compptr->v_samp_factor);
+    }
+#else
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+#endif
+  } else {
+    /* We only need a single-MCU buffer. */
+    JBLOCKROW buffer;
+    int i;
+
+    buffer = (JBLOCKROW)
+      (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
+    for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) {
+      coef->MCU_buffer[i] = buffer + i;
+    }
+    coef->whole_image[0] = NULL; /* flag for no virtual arrays */
+  }
+}

mozilla/jpeg/jccolor.c

@@ -0,0 +1,459 @@
+/*
+ * jccolor.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains input colorspace conversion routines.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Private subobject */
+
+typedef struct {
+  struct jpeg_color_converter pub; /* public fields */
+
+  /* Private state for RGB->YCC conversion */
+  INT32 * rgb_ycc_tab;		/* => table for RGB to YCbCr conversion */
+} my_color_converter;
+
+typedef my_color_converter * my_cconvert_ptr;
+
+
+/**************** RGB -> YCbCr conversion: most common case **************/
+
+/*
+ * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
+ * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
+ * The conversion equations to be implemented are therefore
+ *	Y  =  0.29900 * R + 0.58700 * G + 0.11400 * B
+ *	Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B  + CENTERJSAMPLE
+ *	Cr =  0.50000 * R - 0.41869 * G - 0.08131 * B  + CENTERJSAMPLE
+ * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
+ * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2,
+ * rather than CENTERJSAMPLE, for Cb and Cr.  This gave equal positive and
+ * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0)
+ * were not represented exactly.  Now we sacrifice exact representation of
+ * maximum red and maximum blue in order to get exact grayscales.
+ *
+ * To avoid floating-point arithmetic, we represent the fractional constants
+ * as integers scaled up by 2^16 (about 4 digits precision); we have to divide
+ * the products by 2^16, with appropriate rounding, to get the correct answer.
+ *
+ * For even more speed, we avoid doing any multiplications in the inner loop
+ * by precalculating the constants times R,G,B for all possible values.
+ * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
+ * for 12-bit samples it is still acceptable.  It's not very reasonable for
+ * 16-bit samples, but if you want lossless storage you shouldn't be changing
+ * colorspace anyway.
+ * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included
+ * in the tables to save adding them separately in the inner loop.
+ */
+
+#define SCALEBITS	16	/* speediest right-shift on some machines */
+#define CBCR_OFFSET	((INT32) CENTERJSAMPLE << SCALEBITS)
+#define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
+#define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
+
+/* We allocate one big table and divide it up into eight parts, instead of
+ * doing eight alloc_small requests.  This lets us use a single table base
+ * address, which can be held in a register in the inner loops on many
+ * machines (more than can hold all eight addresses, anyway).
+ */
+
+#define R_Y_OFF		0			/* offset to R => Y section */
+#define G_Y_OFF		(1*(MAXJSAMPLE+1))	/* offset to G => Y section */
+#define B_Y_OFF		(2*(MAXJSAMPLE+1))	/* etc. */
+#define R_CB_OFF	(3*(MAXJSAMPLE+1))
+#define G_CB_OFF	(4*(MAXJSAMPLE+1))
+#define B_CB_OFF	(5*(MAXJSAMPLE+1))
+#define R_CR_OFF	B_CB_OFF		/* B=>Cb, R=>Cr are the same */
+#define G_CR_OFF	(6*(MAXJSAMPLE+1))
+#define B_CR_OFF	(7*(MAXJSAMPLE+1))
+#define TABLE_SIZE	(8*(MAXJSAMPLE+1))
+
+
+/*
+ * Initialize for RGB->YCC colorspace conversion.
+ */
+
+METHODDEF(void)
+rgb_ycc_start (j_compress_ptr cinfo)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  INT32 * rgb_ycc_tab;
+  INT32 i;
+
+  /* Allocate and fill in the conversion tables. */
+  cconvert->rgb_ycc_tab = rgb_ycc_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(TABLE_SIZE * SIZEOF(INT32)));
+
+  for (i = 0; i <= MAXJSAMPLE; i++) {
+    rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i;
+    rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i;
+    rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i     + ONE_HALF;
+    rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i;
+    rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i;
+    /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr.
+     * This ensures that the maximum output will round to MAXJSAMPLE
+     * not MAXJSAMPLE+1, and thus that we don't have to range-limit.
+     */
+    rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i    + CBCR_OFFSET + ONE_HALF-1;
+/*  B=>Cb and R=>Cr tables are the same
+    rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i    + CBCR_OFFSET + ONE_HALF-1;
+*/
+    rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i;
+    rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i;
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ *
+ * Note that we change from the application's interleaved-pixel format
+ * to our internal noninterleaved, one-plane-per-component format.
+ * The input buffer is therefore three times as wide as the output buffer.
+ *
+ * A starting row offset is provided only for the output buffer.  The caller
+ * can easily adjust the passed input_buf value to accommodate any row
+ * offset required on that side.
+ */
+
+METHODDEF(void)
+rgb_ycc_convert (j_compress_ptr cinfo,
+		 JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+		 JDIMENSION output_row, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register int r, g, b;
+  register INT32 * ctab = cconvert->rgb_ycc_tab;
+  register JSAMPROW inptr;
+  register JSAMPROW outptr0, outptr1, outptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr0 = output_buf[0][output_row];
+    outptr1 = output_buf[1][output_row];
+    outptr2 = output_buf[2][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr[RGB_RED]);
+      g = GETJSAMPLE(inptr[RGB_GREEN]);
+      b = GETJSAMPLE(inptr[RGB_BLUE]);
+      inptr += RGB_PIXELSIZE;
+      /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
+       * must be too; we do not need an explicit range-limiting operation.
+       * Hence the value being shifted is never negative, and we don't
+       * need the general RIGHT_SHIFT macro.
+       */
+      /* Y */
+      outptr0[col] = (JSAMPLE)
+		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
+		 >> SCALEBITS);
+      /* Cb */
+      outptr1[col] = (JSAMPLE)
+		((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF])
+		 >> SCALEBITS);
+      /* Cr */
+      outptr2[col] = (JSAMPLE)
+		((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
+		 >> SCALEBITS);
+    }
+  }
+}
+
+
+/**************** Cases other than RGB -> YCbCr **************/
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * This version handles RGB->grayscale conversion, which is the same
+ * as the RGB->Y portion of RGB->YCbCr.
+ * We assume rgb_ycc_start has been called (we only use the Y tables).
+ */
+
+METHODDEF(void)
+rgb_gray_convert (j_compress_ptr cinfo,
+		  JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+		  JDIMENSION output_row, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register int r, g, b;
+  register INT32 * ctab = cconvert->rgb_ycc_tab;
+  register JSAMPROW inptr;
+  register JSAMPROW outptr;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr = output_buf[0][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr[RGB_RED]);
+      g = GETJSAMPLE(inptr[RGB_GREEN]);
+      b = GETJSAMPLE(inptr[RGB_BLUE]);
+      inptr += RGB_PIXELSIZE;
+      /* Y */
+      outptr[col] = (JSAMPLE)
+		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
+		 >> SCALEBITS);
+    }
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * This version handles Adobe-style CMYK->YCCK conversion,
+ * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same
+ * conversion as above, while passing K (black) unchanged.
+ * We assume rgb_ycc_start has been called.
+ */
+
+METHODDEF(void)
+cmyk_ycck_convert (j_compress_ptr cinfo,
+		   JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+		   JDIMENSION output_row, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register int r, g, b;
+  register INT32 * ctab = cconvert->rgb_ycc_tab;
+  register JSAMPROW inptr;
+  register JSAMPROW outptr0, outptr1, outptr2, outptr3;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr0 = output_buf[0][output_row];
+    outptr1 = output_buf[1][output_row];
+    outptr2 = output_buf[2][output_row];
+    outptr3 = output_buf[3][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      r = MAXJSAMPLE - GETJSAMPLE(inptr[0]);
+      g = MAXJSAMPLE - GETJSAMPLE(inptr[1]);
+      b = MAXJSAMPLE - GETJSAMPLE(inptr[2]);
+      /* K passes through as-is */
+      outptr3[col] = inptr[3];	/* don't need GETJSAMPLE here */
+      inptr += 4;
+      /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
+       * must be too; we do not need an explicit range-limiting operation.
+       * Hence the value being shifted is never negative, and we don't
+       * need the general RIGHT_SHIFT macro.
+       */
+      /* Y */
+      outptr0[col] = (JSAMPLE)
+		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
+		 >> SCALEBITS);
+      /* Cb */
+      outptr1[col] = (JSAMPLE)
+		((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF])
+		 >> SCALEBITS);
+      /* Cr */
+      outptr2[col] = (JSAMPLE)
+		((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
+		 >> SCALEBITS);
+    }
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * This version handles grayscale output with no conversion.
+ * The source can be either plain grayscale or YCbCr (since Y == gray).
+ */
+
+METHODDEF(void)
+grayscale_convert (j_compress_ptr cinfo,
+		   JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+		   JDIMENSION output_row, int num_rows)
+{
+  register JSAMPROW inptr;
+  register JSAMPROW outptr;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+  int instride = cinfo->input_components;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr = output_buf[0][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      outptr[col] = inptr[0];	/* don't need GETJSAMPLE() here */
+      inptr += instride;
+    }
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * This version handles multi-component colorspaces without conversion.
+ * We assume input_components == num_components.
+ */
+
+METHODDEF(void)
+null_convert (j_compress_ptr cinfo,
+	      JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+	      JDIMENSION output_row, int num_rows)
+{
+  register JSAMPROW inptr;
+  register JSAMPROW outptr;
+  register JDIMENSION col;
+  register int ci;
+  int nc = cinfo->num_components;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    /* It seems fastest to make a separate pass for each component. */
+    for (ci = 0; ci < nc; ci++) {
+      inptr = *input_buf;
+      outptr = output_buf[ci][output_row];
+      for (col = 0; col < num_cols; col++) {
+	outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */
+	inptr += nc;
+      }
+    }
+    input_buf++;
+    output_row++;
+  }
+}
+
+
+/*
+ * Empty method for start_pass.
+ */
+
+METHODDEF(void)
+null_method (j_compress_ptr cinfo)
+{
+  /* no work needed */
+}
+
+
+/*
+ * Module initialization routine for input colorspace conversion.
+ */
+
+GLOBAL(void)
+jinit_color_converter (j_compress_ptr cinfo)
+{
+  my_cconvert_ptr cconvert;
+
+  cconvert = (my_cconvert_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_color_converter));
+  cinfo->cconvert = (struct jpeg_color_converter *) cconvert;
+  /* set start_pass to null method until we find out differently */
+  cconvert->pub.start_pass = null_method;
+
+  /* Make sure input_components agrees with in_color_space */
+  switch (cinfo->in_color_space) {
+  case JCS_GRAYSCALE:
+    if (cinfo->input_components != 1)
+      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
+    break;
+
+  case JCS_RGB:
+#if RGB_PIXELSIZE != 3
+    if (cinfo->input_components != RGB_PIXELSIZE)
+      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
+    break;
+#endif /* else share code with YCbCr */
+
+  case JCS_YCbCr:
+    if (cinfo->input_components != 3)
+      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
+    break;
+
+  case JCS_CMYK:
+  case JCS_YCCK:
+    if (cinfo->input_components != 4)
+      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
+    break;
+
+  default:			/* JCS_UNKNOWN can be anything */
+    if (cinfo->input_components < 1)
+      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
+    break;
+  }
+
+  /* Check num_components, set conversion method based on requested space */
+  switch (cinfo->jpeg_color_space) {
+  case JCS_GRAYSCALE:
+    if (cinfo->num_components != 1)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    if (cinfo->in_color_space == JCS_GRAYSCALE)
+      cconvert->pub.color_convert = grayscale_convert;
+    else if (cinfo->in_color_space == JCS_RGB) {
+      cconvert->pub.start_pass = rgb_ycc_start;
+      cconvert->pub.color_convert = rgb_gray_convert;
+    } else if (cinfo->in_color_space == JCS_YCbCr)
+      cconvert->pub.color_convert = grayscale_convert;
+    else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  case JCS_RGB:
+    if (cinfo->num_components != 3)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    if (cinfo->in_color_space == JCS_RGB && RGB_PIXELSIZE == 3)
+      cconvert->pub.color_convert = null_convert;
+    else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  case JCS_YCbCr:
+    if (cinfo->num_components != 3)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    if (cinfo->in_color_space == JCS_RGB) {
+      cconvert->pub.start_pass = rgb_ycc_start;
+      cconvert->pub.color_convert = rgb_ycc_convert;
+    } else if (cinfo->in_color_space == JCS_YCbCr)
+      cconvert->pub.color_convert = null_convert;
+    else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  case JCS_CMYK:
+    if (cinfo->num_components != 4)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    if (cinfo->in_color_space == JCS_CMYK)
+      cconvert->pub.color_convert = null_convert;
+    else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  case JCS_YCCK:
+    if (cinfo->num_components != 4)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    if (cinfo->in_color_space == JCS_CMYK) {
+      cconvert->pub.start_pass = rgb_ycc_start;
+      cconvert->pub.color_convert = cmyk_ycck_convert;
+    } else if (cinfo->in_color_space == JCS_YCCK)
+      cconvert->pub.color_convert = null_convert;
+    else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  default:			/* allow null conversion of JCS_UNKNOWN */
+    if (cinfo->jpeg_color_space != cinfo->in_color_space ||
+	cinfo->num_components != cinfo->input_components)
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    cconvert->pub.color_convert = null_convert;
+    break;
+  }
+}

mozilla/jpeg/jcdctmgr.c

@@ -0,0 +1,387 @@
+/*
+ * jcdctmgr.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the forward-DCT management logic.
+ * This code selects a particular DCT implementation to be used,
+ * and it performs related housekeeping chores including coefficient
+ * quantization.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+
+/* Private subobject for this module */
+
+typedef struct {
+  struct jpeg_forward_dct pub;	/* public fields */
+
+  /* Pointer to the DCT routine actually in use */
+  forward_DCT_method_ptr do_dct;
+
+  /* The actual post-DCT divisors --- not identical to the quant table
+   * entries, because of scaling (especially for an unnormalized DCT).
+   * Each table is given in normal array order.
+   */
+  DCTELEM * divisors[NUM_QUANT_TBLS];
+
+#ifdef DCT_FLOAT_SUPPORTED
+  /* Same as above for the floating-point case. */
+  float_DCT_method_ptr do_float_dct;
+  FAST_FLOAT * float_divisors[NUM_QUANT_TBLS];
+#endif
+} my_fdct_controller;
+
+typedef my_fdct_controller * my_fdct_ptr;
+
+
+/*
+ * Initialize for a processing pass.
+ * Verify that all referenced Q-tables are present, and set up
+ * the divisor table for each one.
+ * In the current implementation, DCT of all components is done during
+ * the first pass, even if only some components will be output in the
+ * first scan.  Hence all components should be examined here.
+ */
+
+METHODDEF(void)
+start_pass_fdctmgr (j_compress_ptr cinfo)
+{
+  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
+  int ci, qtblno, i;
+  jpeg_component_info *compptr;
+  JQUANT_TBL * qtbl;
+  DCTELEM * dtbl;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    qtblno = compptr->quant_tbl_no;
+    /* Make sure specified quantization table is present */
+    if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
+	cinfo->quant_tbl_ptrs[qtblno] == NULL)
+      ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
+    qtbl = cinfo->quant_tbl_ptrs[qtblno];
+    /* Compute divisors for this quant table */
+    /* We may do this more than once for same table, but it's not a big deal */
+    switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+    case JDCT_ISLOW:
+      /* For LL&M IDCT method, divisors are equal to raw quantization
+       * coefficients multiplied by 8 (to counteract scaling).
+       */
+      if (fdct->divisors[qtblno] == NULL) {
+	fdct->divisors[qtblno] = (DCTELEM *)
+	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				      DCTSIZE2 * SIZEOF(DCTELEM));
+      }
+      dtbl = fdct->divisors[qtblno];
+      for (i = 0; i < DCTSIZE2; i++) {
+	dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3;
+      }
+      break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+    case JDCT_IFAST:
+      {
+	/* For AA&N IDCT method, divisors are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * We apply a further scale factor of 8.
+	 */
+#define CONST_BITS 14
+	static const INT16 aanscales[DCTSIZE2] = {
+	  /* precomputed values scaled up by 14 bits */
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
+	  21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
+	  19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
+	   8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
+	   4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
+	};
+	SHIFT_TEMPS
+
+	if (fdct->divisors[qtblno] == NULL) {
+	  fdct->divisors[qtblno] = (DCTELEM *)
+	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+					DCTSIZE2 * SIZEOF(DCTELEM));
+	}
+	dtbl = fdct->divisors[qtblno];
+	for (i = 0; i < DCTSIZE2; i++) {
+	  dtbl[i] = (DCTELEM)
+	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
+				  (INT32) aanscales[i]),
+		    CONST_BITS-3);
+	}
+      }
+      break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+    case JDCT_FLOAT:
+      {
+	/* For float AA&N IDCT method, divisors are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * We apply a further scale factor of 8.
+	 * What's actually stored is 1/divisor so that the inner loop can
+	 * use a multiplication rather than a division.
+	 */
+	FAST_FLOAT * fdtbl;
+	int row, col;
+	static const double aanscalefactor[DCTSIZE] = {
+	  1.0, 1.387039845, 1.306562965, 1.175875602,
+	  1.0, 0.785694958, 0.541196100, 0.275899379
+	};
+
+	if (fdct->float_divisors[qtblno] == NULL) {
+	  fdct->float_divisors[qtblno] = (FAST_FLOAT *)
+	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+					DCTSIZE2 * SIZEOF(FAST_FLOAT));
+	}
+	fdtbl = fdct->float_divisors[qtblno];
+	i = 0;
+	for (row = 0; row < DCTSIZE; row++) {
+	  for (col = 0; col < DCTSIZE; col++) {
+	    fdtbl[i] = (FAST_FLOAT)
+	      (1.0 / (((double) qtbl->quantval[i] *
+		       aanscalefactor[row] * aanscalefactor[col] * 8.0)));
+	    i++;
+	  }
+	}
+      }
+      break;
+#endif
+    default:
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+      break;
+    }
+  }
+}
+
+
+/*
+ * Perform forward DCT on one or more blocks of a component.
+ *
+ * The input samples are taken from the sample_data[] array starting at
+ * position start_row/start_col, and moving to the right for any additional
+ * blocks. The quantized coefficients are returned in coef_blocks[].
+ */
+
+METHODDEF(void)
+forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr,
+	     JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
+	     JDIMENSION start_row, JDIMENSION start_col,
+	     JDIMENSION num_blocks)
+/* This version is used for integer DCT implementations. */
+{
+  /* This routine is heavily used, so it's worth coding it tightly. */
+  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
+  forward_DCT_method_ptr do_dct = fdct->do_dct;
+  DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no];
+  DCTELEM workspace[DCTSIZE2];	/* work area for FDCT subroutine */
+  JDIMENSION bi;
+
+  sample_data += start_row;	/* fold in the vertical offset once */
+
+  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
+    /* Load data into workspace, applying unsigned->signed conversion */
+    { register DCTELEM *workspaceptr;
+      register JSAMPROW elemptr;
+      register int elemr;
+
+      workspaceptr = workspace;
+      for (elemr = 0; elemr < DCTSIZE; elemr++) {
+	elemptr = sample_data[elemr] + start_col;
+#if DCTSIZE == 8		/* unroll the inner loop */
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+#else
+	{ register int elemc;
+	  for (elemc = DCTSIZE; elemc > 0; elemc--) {
+	    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	  }
+	}
+#endif
+      }
+    }
+
+    /* Perform the DCT */
+    (*do_dct) (workspace);
+
+    /* Quantize/descale the coefficients, and store into coef_blocks[] */
+    { register DCTELEM temp, qval;
+      register int i;
+      register JCOEFPTR output_ptr = coef_blocks[bi];
+
+      for (i = 0; i < DCTSIZE2; i++) {
+	qval = divisors[i];
+	temp = workspace[i];
+	/* Divide the coefficient value by qval, ensuring proper rounding.
+	 * Since C does not specify the direction of rounding for negative
+	 * quotients, we have to force the dividend positive for portability.
+	 *
+	 * In most files, at least half of the output values will be zero
+	 * (at default quantization settings, more like three-quarters...)
+	 * so we should ensure that this case is fast.  On many machines,
+	 * a comparison is enough cheaper than a divide to make a special test
+	 * a win.  Since both inputs will be nonnegative, we need only test
+	 * for a < b to discover whether a/b is 0.
+	 * If your machine's division is fast enough, define FAST_DIVIDE.
+	 */
+#ifdef FAST_DIVIDE
+#define DIVIDE_BY(a,b)	a /= b
+#else
+#define DIVIDE_BY(a,b)	if (a >= b) a /= b; else a = 0
+#endif
+	if (temp < 0) {
+	  temp = -temp;
+	  temp += qval>>1;	/* for rounding */
+	  DIVIDE_BY(temp, qval);
+	  temp = -temp;
+	} else {
+	  temp += qval>>1;	/* for rounding */
+	  DIVIDE_BY(temp, qval);
+	}
+	output_ptr[i] = (JCOEF) temp;
+      }
+    }
+  }
+}
+
+
+#ifdef DCT_FLOAT_SUPPORTED
+
+METHODDEF(void)
+forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
+		   JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
+		   JDIMENSION start_row, JDIMENSION start_col,
+		   JDIMENSION num_blocks)
+/* This version is used for floating-point DCT implementations. */
+{
+  /* This routine is heavily used, so it's worth coding it tightly. */
+  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
+  float_DCT_method_ptr do_dct = fdct->do_float_dct;
+  FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no];
+  FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */
+  JDIMENSION bi;
+
+  sample_data += start_row;	/* fold in the vertical offset once */
+
+  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
+    /* Load data into workspace, applying unsigned->signed conversion */
+    { register FAST_FLOAT *workspaceptr;
+      register JSAMPROW elemptr;
+      register int elemr;
+
+      workspaceptr = workspace;
+      for (elemr = 0; elemr < DCTSIZE; elemr++) {
+	elemptr = sample_data[elemr] + start_col;
+#if DCTSIZE == 8		/* unroll the inner loop */
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+#else
+	{ register int elemc;
+	  for (elemc = DCTSIZE; elemc > 0; elemc--) {
+	    *workspaceptr++ = (FAST_FLOAT)
+	      (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	  }
+	}
+#endif
+      }
+    }
+
+    /* Perform the DCT */
+    (*do_dct) (workspace);
+
+    /* Quantize/descale the coefficients, and store into coef_blocks[] */
+    { register FAST_FLOAT temp;
+      register int i;
+      register JCOEFPTR output_ptr = coef_blocks[bi];
+
+      for (i = 0; i < DCTSIZE2; i++) {
+	/* Apply the quantization and scaling factor */
+	temp = workspace[i] * divisors[i];
+	/* Round to nearest integer.
+	 * Since C does not specify the direction of rounding for negative
+	 * quotients, we have to force the dividend positive for portability.
+	 * The maximum coefficient size is +-16K (for 12-bit data), so this
+	 * code should work for either 16-bit or 32-bit ints.
+	 */
+	output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384);
+      }
+    }
+  }
+}
+
+#endif /* DCT_FLOAT_SUPPORTED */
+
+
+/*
+ * Initialize FDCT manager.
+ */
+
+GLOBAL(void)
+jinit_forward_dct (j_compress_ptr cinfo)
+{
+  my_fdct_ptr fdct;
+  int i;
+
+  fdct = (my_fdct_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_fdct_controller));
+  cinfo->fdct = (struct jpeg_forward_dct *) fdct;
+  fdct->pub.start_pass = start_pass_fdctmgr;
+
+  switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+  case JDCT_ISLOW:
+    fdct->pub.forward_DCT = forward_DCT;
+    fdct->do_dct = jpeg_fdct_islow;
+    break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  case JDCT_IFAST:
+    fdct->pub.forward_DCT = forward_DCT;
+    fdct->do_dct = jpeg_fdct_ifast;
+    break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  case JDCT_FLOAT:
+    fdct->pub.forward_DCT = forward_DCT_float;
+    fdct->do_float_dct = jpeg_fdct_float;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+    break;
+  }
+
+  /* Mark divisor tables unallocated */
+  for (i = 0; i < NUM_QUANT_TBLS; i++) {
+    fdct->divisors[i] = NULL;
+#ifdef DCT_FLOAT_SUPPORTED
+    fdct->float_divisors[i] = NULL;
+#endif
+  }
+}

mozilla/jpeg/jchuff.c

@@ -0,0 +1,909 @@
+/*
+ * jchuff.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains Huffman entropy encoding routines.
+ *
+ * Much of the complexity here has to do with supporting output suspension.
+ * If the data destination module demands suspension, we want to be able to
+ * back up to the start of the current MCU.  To do this, we copy state
+ * variables into local working storage, and update them back to the
+ * permanent JPEG objects only upon successful completion of an MCU.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jchuff.h"		/* Declarations shared with jcphuff.c */
+
+
+/* Expanded entropy encoder object for Huffman encoding.
+ *
+ * The savable_state subrecord contains fields that change within an MCU,
+ * but must not be updated permanently until we complete the MCU.
+ */
+
+typedef struct {
+  INT32 put_buffer;		/* current bit-accumulation buffer */
+  int put_bits;			/* # of bits now in it */
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+} savable_state;
+
+/* This macro is to work around compilers with missing or broken
+ * structure assignment.  You'll need to fix this code if you have
+ * such a compiler and you change MAX_COMPS_IN_SCAN.
+ */
+
+#ifndef NO_STRUCT_ASSIGN
+#define ASSIGN_STATE(dest,src)  ((dest) = (src))
+#else
+#if MAX_COMPS_IN_SCAN == 4
+#define ASSIGN_STATE(dest,src)  \
+	((dest).put_buffer = (src).put_buffer, \
+	 (dest).put_bits = (src).put_bits, \
+	 (dest).last_dc_val[0] = (src).last_dc_val[0], \
+	 (dest).last_dc_val[1] = (src).last_dc_val[1], \
+	 (dest).last_dc_val[2] = (src).last_dc_val[2], \
+	 (dest).last_dc_val[3] = (src).last_dc_val[3])
+#endif
+#endif
+
+
+typedef struct {
+  struct jpeg_entropy_encoder pub; /* public fields */
+
+  savable_state saved;		/* Bit buffer & DC state at start of MCU */
+
+  /* These fields are NOT loaded into local working state. */
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+  int next_restart_num;		/* next restart number to write (0-7) */
+
+  /* Pointers to derived tables (these workspaces have image lifespan) */
+  c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS];
+  c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS];
+
+#ifdef ENTROPY_OPT_SUPPORTED	/* Statistics tables for optimization */
+  long * dc_count_ptrs[NUM_HUFF_TBLS];
+  long * ac_count_ptrs[NUM_HUFF_TBLS];
+#endif
+} huff_entropy_encoder;
+
+typedef huff_entropy_encoder * huff_entropy_ptr;
+
+/* Working state while writing an MCU.
+ * This struct contains all the fields that are needed by subroutines.
+ */
+
+typedef struct {
+  JOCTET * next_output_byte;	/* => next byte to write in buffer */
+  size_t free_in_buffer;	/* # of byte spaces remaining in buffer */
+  savable_state cur;		/* Current bit buffer & DC state */
+  j_compress_ptr cinfo;		/* dump_buffer needs access to this */
+} working_state;
+
+
+/* Forward declarations */
+METHODDEF(boolean) encode_mcu_huff JPP((j_compress_ptr cinfo,
+					JBLOCKROW *MCU_data));
+METHODDEF(void) finish_pass_huff JPP((j_compress_ptr cinfo));
+#ifdef ENTROPY_OPT_SUPPORTED
+METHODDEF(boolean) encode_mcu_gather JPP((j_compress_ptr cinfo,
+					  JBLOCKROW *MCU_data));
+METHODDEF(void) finish_pass_gather JPP((j_compress_ptr cinfo));
+#endif
+
+
+/*
+ * Initialize for a Huffman-compressed scan.
+ * If gather_statistics is TRUE, we do not output anything during the scan,
+ * just count the Huffman symbols used and generate Huffman code tables.
+ */
+
+METHODDEF(void)
+start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int ci, dctbl, actbl;
+  jpeg_component_info * compptr;
+
+  if (gather_statistics) {
+#ifdef ENTROPY_OPT_SUPPORTED
+    entropy->pub.encode_mcu = encode_mcu_gather;
+    entropy->pub.finish_pass = finish_pass_gather;
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+  } else {
+    entropy->pub.encode_mcu = encode_mcu_huff;
+    entropy->pub.finish_pass = finish_pass_huff;
+  }
+
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    dctbl = compptr->dc_tbl_no;
+    actbl = compptr->ac_tbl_no;
+    if (gather_statistics) {
+#ifdef ENTROPY_OPT_SUPPORTED
+      /* Check for invalid table indexes */
+      /* (make_c_derived_tbl does this in the other path) */
+      if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS)
+	ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl);
+      if (actbl < 0 || actbl >= NUM_HUFF_TBLS)
+	ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl);
+      /* Allocate and zero the statistics tables */
+      /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
+      if (entropy->dc_count_ptrs[dctbl] == NULL)
+	entropy->dc_count_ptrs[dctbl] = (long *)
+	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				      257 * SIZEOF(long));
+      MEMZERO(entropy->dc_count_ptrs[dctbl], 257 * SIZEOF(long));
+      if (entropy->ac_count_ptrs[actbl] == NULL)
+	entropy->ac_count_ptrs[actbl] = (long *)
+	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				      257 * SIZEOF(long));
+      MEMZERO(entropy->ac_count_ptrs[actbl], 257 * SIZEOF(long));
+#endif
+    } else {
+      /* Compute derived values for Huffman tables */
+      /* We may do this more than once for a table, but it's not expensive */
+      jpeg_make_c_derived_tbl(cinfo, TRUE, dctbl,
+			      & entropy->dc_derived_tbls[dctbl]);
+      jpeg_make_c_derived_tbl(cinfo, FALSE, actbl,
+			      & entropy->ac_derived_tbls[actbl]);
+    }
+    /* Initialize DC predictions to 0 */
+    entropy->saved.last_dc_val[ci] = 0;
+  }
+
+  /* Initialize bit buffer to empty */
+  entropy->saved.put_buffer = 0;
+  entropy->saved.put_bits = 0;
+
+  /* Initialize restart stuff */
+  entropy->restarts_to_go = cinfo->restart_interval;
+  entropy->next_restart_num = 0;
+}
+
+
+/*
+ * Compute the derived values for a Huffman table.
+ * This routine also performs some validation checks on the table.
+ *
+ * Note this is also used by jcphuff.c.
+ */
+
+GLOBAL(void)
+jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno,
+			 c_derived_tbl ** pdtbl)
+{
+  JHUFF_TBL *htbl;
+  c_derived_tbl *dtbl;
+  int p, i, l, lastp, si, maxsymbol;
+  char huffsize[257];
+  unsigned int huffcode[257];
+  unsigned int code;
+
+  /* Note that huffsize[] and huffcode[] are filled in code-length order,
+   * paralleling the order of the symbols themselves in htbl->huffval[].
+   */
+
+  /* Find the input Huffman table */
+  if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+  htbl =
+    isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
+  if (htbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+
+  /* Allocate a workspace if we haven't already done so. */
+  if (*pdtbl == NULL)
+    *pdtbl = (c_derived_tbl *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(c_derived_tbl));
+  dtbl = *pdtbl;
+  
+  /* Figure C.1: make table of Huffman code length for each symbol */
+
+  p = 0;
+  for (l = 1; l <= 16; l++) {
+    i = (int) htbl->bits[l];
+    if (i < 0 || p + i > 256)	/* protect against table overrun */
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    while (i--)
+      huffsize[p++] = (char) l;
+  }
+  huffsize[p] = 0;
+  lastp = p;
+  
+  /* Figure C.2: generate the codes themselves */
+  /* We also validate that the counts represent a legal Huffman code tree. */
+
+  code = 0;
+  si = huffsize[0];
+  p = 0;
+  while (huffsize[p]) {
+    while (((int) huffsize[p]) == si) {
+      huffcode[p++] = code;
+      code++;
+    }
+    /* code is now 1 more than the last code used for codelength si; but
+     * it must still fit in si bits, since no code is allowed to be all ones.
+     */
+    if (((INT32) code) >= (((INT32) 1) << si))
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    code <<= 1;
+    si++;
+  }
+  
+  /* Figure C.3: generate encoding tables */
+  /* These are code and size indexed by symbol value */
+
+  /* Set all codeless symbols to have code length 0;
+   * this lets us detect duplicate VAL entries here, and later
+   * allows emit_bits to detect any attempt to emit such symbols.
+   */
+  MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi));
+
+  /* This is also a convenient place to check for out-of-range
+   * and duplicated VAL entries.  We allow 0..255 for AC symbols
+   * but only 0..15 for DC.  (We could constrain them further
+   * based on data depth and mode, but this seems enough.)
+   */
+  maxsymbol = isDC ? 15 : 255;
+
+  for (p = 0; p < lastp; p++) {
+    i = htbl->huffval[p];
+    if (i < 0 || i > maxsymbol || dtbl->ehufsi[i])
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    dtbl->ehufco[i] = huffcode[p];
+    dtbl->ehufsi[i] = huffsize[p];
+  }
+}
+
+
+/* Outputting bytes to the file */
+
+/* Emit a byte, taking 'action' if must suspend. */
+#define emit_byte(state,val,action)  \
+	{ *(state)->next_output_byte++ = (JOCTET) (val);  \
+	  if (--(state)->free_in_buffer == 0)  \
+	    if (! dump_buffer(state))  \
+	      { action; } }
+
+
+LOCAL(boolean)
+dump_buffer (working_state * state)
+/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */
+{
+  struct jpeg_destination_mgr * dest = state->cinfo->dest;
+
+  if (! (*dest->empty_output_buffer) (state->cinfo))
+    return FALSE;
+  /* After a successful buffer dump, must reset buffer pointers */
+  state->next_output_byte = dest->next_output_byte;
+  state->free_in_buffer = dest->free_in_buffer;
+  return TRUE;
+}
+
+
+/* Outputting bits to the file */
+
+/* Only the right 24 bits of put_buffer are used; the valid bits are
+ * left-justified in this part.  At most 16 bits can be passed to emit_bits
+ * in one call, and we never retain more than 7 bits in put_buffer
+ * between calls, so 24 bits are sufficient.
+ */
+
+INLINE
+LOCAL(boolean)
+emit_bits (working_state * state, unsigned int code, int size)
+/* Emit some bits; return TRUE if successful, FALSE if must suspend */
+{
+  /* This routine is heavily used, so it's worth coding tightly. */
+  register INT32 put_buffer = (INT32) code;
+  register int put_bits = state->cur.put_bits;
+
+  /* if size is 0, caller used an invalid Huffman table entry */
+  if (size == 0)
+    ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE);
+
+  put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
+  
+  put_bits += size;		/* new number of bits in buffer */
+  
+  put_buffer <<= 24 - put_bits; /* align incoming bits */
+
+  put_buffer |= state->cur.put_buffer; /* and merge with old buffer contents */
+  
+  while (put_bits >= 8) {
+    int c = (int) ((put_buffer >> 16) & 0xFF);
+    
+    emit_byte(state, c, return FALSE);
+    if (c == 0xFF) {		/* need to stuff a zero byte? */
+      emit_byte(state, 0, return FALSE);
+    }
+    put_buffer <<= 8;
+    put_bits -= 8;
+  }
+
+  state->cur.put_buffer = put_buffer; /* update state variables */
+  state->cur.put_bits = put_bits;
+
+  return TRUE;
+}
+
+
+LOCAL(boolean)
+flush_bits (working_state * state)
+{
+  if (! emit_bits(state, 0x7F, 7)) /* fill any partial byte with ones */
+    return FALSE;
+  state->cur.put_buffer = 0;	/* and reset bit-buffer to empty */
+  state->cur.put_bits = 0;
+  return TRUE;
+}
+
+
+/* Encode a single block's worth of coefficients */
+
+LOCAL(boolean)
+encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val,
+		  c_derived_tbl *dctbl, c_derived_tbl *actbl)
+{
+  register int temp, temp2;
+  register int nbits;
+  register int k, r, i;
+  
+  /* Encode the DC coefficient difference per section F.1.2.1 */
+  
+  temp = temp2 = block[0] - last_dc_val;
+
+  if (temp < 0) {
+    temp = -temp;		/* temp is abs value of input */
+    /* For a negative input, want temp2 = bitwise complement of abs(input) */
+    /* This code assumes we are on a two's complement machine */
+    temp2--;
+  }
+  
+  /* Find the number of bits needed for the magnitude of the coefficient */
+  nbits = 0;
+  while (temp) {
+    nbits++;
+    temp >>= 1;
+  }
+  /* Check for out-of-range coefficient values.
+   * Since we're encoding a difference, the range limit is twice as much.
+   */
+  if (nbits > MAX_COEF_BITS+1)
+    ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
+  
+  /* Emit the Huffman-coded symbol for the number of bits */
+  if (! emit_bits(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits]))
+    return FALSE;
+
+  /* Emit that number of bits of the value, if positive, */
+  /* or the complement of its magnitude, if negative. */
+  if (nbits)			/* emit_bits rejects calls with size 0 */
+    if (! emit_bits(state, (unsigned int) temp2, nbits))
+      return FALSE;
+
+  /* Encode the AC coefficients per section F.1.2.2 */
+  
+  r = 0;			/* r = run length of zeros */
+  
+  for (k = 1; k < DCTSIZE2; k++) {
+    if ((temp = block[jpeg_natural_order[k]]) == 0) {
+      r++;
+    } else {
+      /* if run length > 15, must emit special run-length-16 codes (0xF0) */
+      while (r > 15) {
+	if (! emit_bits(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0]))
+	  return FALSE;
+	r -= 16;
+      }
+
+      temp2 = temp;
+      if (temp < 0) {
+	temp = -temp;		/* temp is abs value of input */
+	/* This code assumes we are on a two's complement machine */
+	temp2--;
+      }
+      
+      /* Find the number of bits needed for the magnitude of the coefficient */
+      nbits = 1;		/* there must be at least one 1 bit */
+      while ((temp >>= 1))
+	nbits++;
+      /* Check for out-of-range coefficient values */
+      if (nbits > MAX_COEF_BITS)
+	ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
+      
+      /* Emit Huffman symbol for run length / number of bits */
+      i = (r << 4) + nbits;
+      if (! emit_bits(state, actbl->ehufco[i], actbl->ehufsi[i]))
+	return FALSE;
+
+      /* Emit that number of bits of the value, if positive, */
+      /* or the complement of its magnitude, if negative. */
+      if (! emit_bits(state, (unsigned int) temp2, nbits))
+	return FALSE;
+      
+      r = 0;
+    }
+  }
+
+  /* If the last coef(s) were zero, emit an end-of-block code */
+  if (r > 0)
+    if (! emit_bits(state, actbl->ehufco[0], actbl->ehufsi[0]))
+      return FALSE;
+
+  return TRUE;
+}
+
+
+/*
+ * Emit a restart marker & resynchronize predictions.
+ */
+
+LOCAL(boolean)
+emit_restart (working_state * state, int restart_num)
+{
+  int ci;
+
+  if (! flush_bits(state))
+    return FALSE;
+
+  emit_byte(state, 0xFF, return FALSE);
+  emit_byte(state, JPEG_RST0 + restart_num, return FALSE);
+
+  /* Re-initialize DC predictions to 0 */
+  for (ci = 0; ci < state->cinfo->comps_in_scan; ci++)
+    state->cur.last_dc_val[ci] = 0;
+
+  /* The restart counter is not updated until we successfully write the MCU. */
+
+  return TRUE;
+}
+
+
+/*
+ * Encode and output one MCU's worth of Huffman-compressed coefficients.
+ */
+
+METHODDEF(boolean)
+encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  working_state state;
+  int blkn, ci;
+  jpeg_component_info * compptr;
+
+  /* Load up working state */
+  state.next_output_byte = cinfo->dest->next_output_byte;
+  state.free_in_buffer = cinfo->dest->free_in_buffer;
+  ASSIGN_STATE(state.cur, entropy->saved);
+  state.cinfo = cinfo;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (! emit_restart(&state, entropy->next_restart_num))
+	return FALSE;
+  }
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+    if (! encode_one_block(&state,
+			   MCU_data[blkn][0], state.cur.last_dc_val[ci],
+			   entropy->dc_derived_tbls[compptr->dc_tbl_no],
+			   entropy->ac_derived_tbls[compptr->ac_tbl_no]))
+      return FALSE;
+    /* Update last_dc_val */
+    state.cur.last_dc_val[ci] = MCU_data[blkn][0][0];
+  }
+
+  /* Completed MCU, so update state */
+  cinfo->dest->next_output_byte = state.next_output_byte;
+  cinfo->dest->free_in_buffer = state.free_in_buffer;
+  ASSIGN_STATE(entropy->saved, state.cur);
+
+  /* Update restart-interval state too */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Finish up at the end of a Huffman-compressed scan.
+ */
+
+METHODDEF(void)
+finish_pass_huff (j_compress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  working_state state;
+
+  /* Load up working state ... flush_bits needs it */
+  state.next_output_byte = cinfo->dest->next_output_byte;
+  state.free_in_buffer = cinfo->dest->free_in_buffer;
+  ASSIGN_STATE(state.cur, entropy->saved);
+  state.cinfo = cinfo;
+
+  /* Flush out the last data */
+  if (! flush_bits(&state))
+    ERREXIT(cinfo, JERR_CANT_SUSPEND);
+
+  /* Update state */
+  cinfo->dest->next_output_byte = state.next_output_byte;
+  cinfo->dest->free_in_buffer = state.free_in_buffer;
+  ASSIGN_STATE(entropy->saved, state.cur);
+}
+
+
+/*
+ * Huffman coding optimization.
+ *
+ * We first scan the supplied data and count the number of uses of each symbol
+ * that is to be Huffman-coded. (This process MUST agree with the code above.)
+ * Then we build a Huffman coding tree for the observed counts.
+ * Symbols which are not needed at all for the particular image are not
+ * assigned any code, which saves space in the DHT marker as well as in
+ * the compressed data.
+ */
+
+#ifdef ENTROPY_OPT_SUPPORTED
+
+
+/* Process a single block's worth of coefficients */
+
+LOCAL(void)
+htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
+		 long dc_counts[], long ac_counts[])
+{
+  register int temp;
+  register int nbits;
+  register int k, r;
+  
+  /* Encode the DC coefficient difference per section F.1.2.1 */
+  
+  temp = block[0] - last_dc_val;
+  if (temp < 0)
+    temp = -temp;
+  
+  /* Find the number of bits needed for the magnitude of the coefficient */
+  nbits = 0;
+  while (temp) {
+    nbits++;
+    temp >>= 1;
+  }
+  /* Check for out-of-range coefficient values.
+   * Since we're encoding a difference, the range limit is twice as much.
+   */
+  if (nbits > MAX_COEF_BITS+1)
+    ERREXIT(cinfo, JERR_BAD_DCT_COEF);
+
+  /* Count the Huffman symbol for the number of bits */
+  dc_counts[nbits]++;
+  
+  /* Encode the AC coefficients per section F.1.2.2 */
+  
+  r = 0;			/* r = run length of zeros */
+  
+  for (k = 1; k < DCTSIZE2; k++) {
+    if ((temp = block[jpeg_natural_order[k]]) == 0) {
+      r++;
+    } else {
+      /* if run length > 15, must emit special run-length-16 codes (0xF0) */
+      while (r > 15) {
+	ac_counts[0xF0]++;
+	r -= 16;
+      }
+      
+      /* Find the number of bits needed for the magnitude of the coefficient */
+      if (temp < 0)
+	temp = -temp;
+      
+      /* Find the number of bits needed for the magnitude of the coefficient */
+      nbits = 1;		/* there must be at least one 1 bit */
+      while ((temp >>= 1))
+	nbits++;
+      /* Check for out-of-range coefficient values */
+      if (nbits > MAX_COEF_BITS)
+	ERREXIT(cinfo, JERR_BAD_DCT_COEF);
+      
+      /* Count Huffman symbol for run length / number of bits */
+      ac_counts[(r << 4) + nbits]++;
+      
+      r = 0;
+    }
+  }
+
+  /* If the last coef(s) were zero, emit an end-of-block code */
+  if (r > 0)
+    ac_counts[0]++;
+}
+
+
+/*
+ * Trial-encode one MCU's worth of Huffman-compressed coefficients.
+ * No data is actually output, so no suspension return is possible.
+ */
+
+METHODDEF(boolean)
+encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int blkn, ci;
+  jpeg_component_info * compptr;
+
+  /* Take care of restart intervals if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      /* Re-initialize DC predictions to 0 */
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++)
+	entropy->saved.last_dc_val[ci] = 0;
+      /* Update restart state */
+      entropy->restarts_to_go = cinfo->restart_interval;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+    htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci],
+		    entropy->dc_count_ptrs[compptr->dc_tbl_no],
+		    entropy->ac_count_ptrs[compptr->ac_tbl_no]);
+    entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0];
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Generate the best Huffman code table for the given counts, fill htbl.
+ * Note this is also used by jcphuff.c.
+ *
+ * The JPEG standard requires that no symbol be assigned a codeword of all
+ * one bits (so that padding bits added at the end of a compressed segment
+ * can't look like a valid code).  Because of the canonical ordering of
+ * codewords, this just means that there must be an unused slot in the
+ * longest codeword length category.  Section K.2 of the JPEG spec suggests
+ * reserving such a slot by pretending that symbol 256 is a valid symbol
+ * with count 1.  In theory that's not optimal; giving it count zero but
+ * including it in the symbol set anyway should give a better Huffman code.
+ * But the theoretically better code actually seems to come out worse in
+ * practice, because it produces more all-ones bytes (which incur stuffed
+ * zero bytes in the final file).  In any case the difference is tiny.
+ *
+ * The JPEG standard requires Huffman codes to be no more than 16 bits long.
+ * If some symbols have a very small but nonzero probability, the Huffman tree
+ * must be adjusted to meet the code length restriction.  We currently use
+ * the adjustment method suggested in JPEG section K.2.  This method is *not*
+ * optimal; it may not choose the best possible limited-length code.  But
+ * typically only very-low-frequency symbols will be given less-than-optimal
+ * lengths, so the code is almost optimal.  Experimental comparisons against
+ * an optimal limited-length-code algorithm indicate that the difference is
+ * microscopic --- usually less than a hundredth of a percent of total size.
+ * So the extra complexity of an optimal algorithm doesn't seem worthwhile.
+ */
+
+GLOBAL(void)
+jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[])
+{
+#define MAX_CLEN 32		/* assumed maximum initial code length */
+  UINT8 bits[MAX_CLEN+1];	/* bits[k] = # of symbols with code length k */
+  int codesize[257];		/* codesize[k] = code length of symbol k */
+  int others[257];		/* next symbol in current branch of tree */
+  int c1, c2;
+  int p, i, j;
+  long v;
+
+  /* This algorithm is explained in section K.2 of the JPEG standard */
+
+  MEMZERO(bits, SIZEOF(bits));
+  MEMZERO(codesize, SIZEOF(codesize));
+  for (i = 0; i < 257; i++)
+    others[i] = -1;		/* init links to empty */
+  
+  freq[256] = 1;		/* make sure 256 has a nonzero count */
+  /* Including the pseudo-symbol 256 in the Huffman procedure guarantees
+   * that no real symbol is given code-value of all ones, because 256
+   * will be placed last in the largest codeword category.
+   */
+
+  /* Huffman's basic algorithm to assign optimal code lengths to symbols */
+
+  for (;;) {
+    /* Find the smallest nonzero frequency, set c1 = its symbol */
+    /* In case of ties, take the larger symbol number */
+    c1 = -1;
+    v = 1000000000L;
+    for (i = 0; i <= 256; i++) {
+      if (freq[i] && freq[i] <= v) {
+	v = freq[i];
+	c1 = i;
+      }
+    }
+
+    /* Find the next smallest nonzero frequency, set c2 = its symbol */
+    /* In case of ties, take the larger symbol number */
+    c2 = -1;
+    v = 1000000000L;
+    for (i = 0; i <= 256; i++) {
+      if (freq[i] && freq[i] <= v && i != c1) {
+	v = freq[i];
+	c2 = i;
+      }
+    }
+
+    /* Done if we've merged everything into one frequency */
+    if (c2 < 0)
+      break;
+    
+    /* Else merge the two counts/trees */
+    freq[c1] += freq[c2];
+    freq[c2] = 0;
+
+    /* Increment the codesize of everything in c1's tree branch */
+    codesize[c1]++;
+    while (others[c1] >= 0) {
+      c1 = others[c1];
+      codesize[c1]++;
+    }
+    
+    others[c1] = c2;		/* chain c2 onto c1's tree branch */
+    
+    /* Increment the codesize of everything in c2's tree branch */
+    codesize[c2]++;
+    while (others[c2] >= 0) {
+      c2 = others[c2];
+      codesize[c2]++;
+    }
+  }
+
+  /* Now count the number of symbols of each code length */
+  for (i = 0; i <= 256; i++) {
+    if (codesize[i]) {
+      /* The JPEG standard seems to think that this can't happen, */
+      /* but I'm paranoid... */
+      if (codesize[i] > MAX_CLEN)
+	ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW);
+
+      bits[codesize[i]]++;
+    }
+  }
+
+  /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure
+   * Huffman procedure assigned any such lengths, we must adjust the coding.
+   * Here is what the JPEG spec says about how this next bit works:
+   * Since symbols are paired for the longest Huffman code, the symbols are
+   * removed from this length category two at a time.  The prefix for the pair
+   * (which is one bit shorter) is allocated to one of the pair; then,
+   * skipping the BITS entry for that prefix length, a code word from the next
+   * shortest nonzero BITS entry is converted into a prefix for two code words
+   * one bit longer.
+   */
+  
+  for (i = MAX_CLEN; i > 16; i--) {
+    while (bits[i] > 0) {
+      j = i - 2;		/* find length of new prefix to be used */
+      while (bits[j] == 0)
+	j--;
+      
+      bits[i] -= 2;		/* remove two symbols */
+      bits[i-1]++;		/* one goes in this length */
+      bits[j+1] += 2;		/* two new symbols in this length */
+      bits[j]--;		/* symbol of this length is now a prefix */
+    }
+  }
+
+  /* Remove the count for the pseudo-symbol 256 from the largest codelength */
+  while (bits[i] == 0)		/* find largest codelength still in use */
+    i--;
+  bits[i]--;
+  
+  /* Return final symbol counts (only for lengths 0..16) */
+  MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits));
+  
+  /* Return a list of the symbols sorted by code length */
+  /* It's not real clear to me why we don't need to consider the codelength
+   * changes made above, but the JPEG spec seems to think this works.
+   */
+  p = 0;
+  for (i = 1; i <= MAX_CLEN; i++) {
+    for (j = 0; j <= 255; j++) {
+      if (codesize[j] == i) {
+	htbl->huffval[p] = (UINT8) j;
+	p++;
+      }
+    }
+  }
+
+  /* Set sent_table FALSE so updated table will be written to JPEG file. */
+  htbl->sent_table = FALSE;
+}
+
+
+/*
+ * Finish up a statistics-gathering pass and create the new Huffman tables.
+ */
+
+METHODDEF(void)
+finish_pass_gather (j_compress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int ci, dctbl, actbl;
+  jpeg_component_info * compptr;
+  JHUFF_TBL **htblptr;
+  boolean did_dc[NUM_HUFF_TBLS];
+  boolean did_ac[NUM_HUFF_TBLS];
+
+  /* It's important not to apply jpeg_gen_optimal_table more than once
+   * per table, because it clobbers the input frequency counts!
+   */
+  MEMZERO(did_dc, SIZEOF(did_dc));
+  MEMZERO(did_ac, SIZEOF(did_ac));
+
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    dctbl = compptr->dc_tbl_no;
+    actbl = compptr->ac_tbl_no;
+    if (! did_dc[dctbl]) {
+      htblptr = & cinfo->dc_huff_tbl_ptrs[dctbl];
+      if (*htblptr == NULL)
+	*htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
+      jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[dctbl]);
+      did_dc[dctbl] = TRUE;
+    }
+    if (! did_ac[actbl]) {
+      htblptr = & cinfo->ac_huff_tbl_ptrs[actbl];
+      if (*htblptr == NULL)
+	*htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
+      jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[actbl]);
+      did_ac[actbl] = TRUE;
+    }
+  }
+}
+
+
+#endif /* ENTROPY_OPT_SUPPORTED */
+
+
+/*
+ * Module initialization routine for Huffman entropy encoding.
+ */
+
+GLOBAL(void)
+jinit_huff_encoder (j_compress_ptr cinfo)
+{
+  huff_entropy_ptr entropy;
+  int i;
+
+  entropy = (huff_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(huff_entropy_encoder));
+  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
+  entropy->pub.start_pass = start_pass_huff;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL;
+#ifdef ENTROPY_OPT_SUPPORTED
+    entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL;
+#endif
+  }
+}

mozilla/jpeg/jchuff.h

@@ -0,0 +1,47 @@
+/*
+ * jchuff.h
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains declarations for Huffman entropy encoding routines
+ * that are shared between the sequential encoder (jchuff.c) and the
+ * progressive encoder (jcphuff.c).  No other modules need to see these.
+ */
+
+/* The legal range of a DCT coefficient is
+ *  -1024 .. +1023  for 8-bit data;
+ * -16384 .. +16383 for 12-bit data.
+ * Hence the magnitude should always fit in 10 or 14 bits respectively.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+#define MAX_COEF_BITS 10
+#else
+#define MAX_COEF_BITS 14
+#endif
+
+/* Derived data constructed for each Huffman table */
+
+typedef struct {
+  unsigned int ehufco[256];	/* code for each symbol */
+  char ehufsi[256];		/* length of code for each symbol */
+  /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */
+} c_derived_tbl;
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jpeg_make_c_derived_tbl	jMkCDerived
+#define jpeg_gen_optimal_table	jGenOptTbl
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+/* Expand a Huffman table definition into the derived format */
+EXTERN(void) jpeg_make_c_derived_tbl
+	JPP((j_compress_ptr cinfo, boolean isDC, int tblno,
+	     c_derived_tbl ** pdtbl));
+
+/* Generate an optimal table definition given the specified counts */
+EXTERN(void) jpeg_gen_optimal_table
+	JPP((j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]));

mozilla/jpeg/jcinit.c

@@ -0,0 +1,72 @@
+/*
+ * jcinit.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains initialization logic for the JPEG compressor.
+ * This routine is in charge of selecting the modules to be executed and
+ * making an initialization call to each one.
+ *
+ * Logically, this code belongs in jcmaster.c.  It's split out because
+ * linking this routine implies linking the entire compression library.
+ * For a transcoding-only application, we want to be able to use jcmaster.c
+ * without linking in the whole library.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * Master selection of compression modules.
+ * This is done once at the start of processing an image.  We determine
+ * which modules will be used and give them appropriate initialization calls.
+ */
+
+GLOBAL(void)
+jinit_compress_master (j_compress_ptr cinfo)
+{
+  /* Initialize master control (includes parameter checking/processing) */
+  jinit_c_master_control(cinfo, FALSE /* full compression */);
+
+  /* Preprocessing */
+  if (! cinfo->raw_data_in) {
+    jinit_color_converter(cinfo);
+    jinit_downsampler(cinfo);
+    jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */);
+  }
+  /* Forward DCT */
+  jinit_forward_dct(cinfo);
+  /* Entropy encoding: either Huffman or arithmetic coding. */
+  if (cinfo->arith_code) {
+    ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
+  } else {
+    if (cinfo->progressive_mode) {
+#ifdef C_PROGRESSIVE_SUPPORTED
+      jinit_phuff_encoder(cinfo);
+#else
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+    } else
+      jinit_huff_encoder(cinfo);
+  }
+
+  /* Need a full-image coefficient buffer in any multi-pass mode. */
+  jinit_c_coef_controller(cinfo,
+		(boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding));
+  jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */);
+
+  jinit_marker_writer(cinfo);
+
+  /* We can now tell the memory manager to allocate virtual arrays. */
+  (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
+
+  /* Write the datastream header (SOI) immediately.
+   * Frame and scan headers are postponed till later.
+   * This lets application insert special markers after the SOI.
+   */
+  (*cinfo->marker->write_file_header) (cinfo);
+}

mozilla/jpeg/jcmainct.c

@@ -0,0 +1,293 @@
+/*
+ * jcmainct.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the main buffer controller for compression.
+ * The main buffer lies between the pre-processor and the JPEG
+ * compressor proper; it holds downsampled data in the JPEG colorspace.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Note: currently, there is no operating mode in which a full-image buffer
+ * is needed at this step.  If there were, that mode could not be used with
+ * "raw data" input, since this module is bypassed in that case.  However,
+ * we've left the code here for possible use in special applications.
+ */
+#undef FULL_MAIN_BUFFER_SUPPORTED
+
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_c_main_controller pub; /* public fields */
+
+  JDIMENSION cur_iMCU_row;	/* number of current iMCU row */
+  JDIMENSION rowgroup_ctr;	/* counts row groups received in iMCU row */
+  boolean suspended;		/* remember if we suspended output */
+  J_BUF_MODE pass_mode;		/* current operating mode */
+
+  /* If using just a strip buffer, this points to the entire set of buffers
+   * (we allocate one for each component).  In the full-image case, this
+   * points to the currently accessible strips of the virtual arrays.
+   */
+  JSAMPARRAY buffer[MAX_COMPONENTS];
+
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+  /* If using full-image storage, this array holds pointers to virtual-array
+   * control blocks for each component.  Unused if not full-image storage.
+   */
+  jvirt_sarray_ptr whole_image[MAX_COMPONENTS];
+#endif
+} my_main_controller;
+
+typedef my_main_controller * my_main_ptr;
+
+
+/* Forward declarations */
+METHODDEF(void) process_data_simple_main
+	JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf,
+	     JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail));
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+METHODDEF(void) process_data_buffer_main
+	JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf,
+	     JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail));
+#endif
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF(void)
+start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+
+  /* Do nothing in raw-data mode. */
+  if (cinfo->raw_data_in)
+    return;
+
+  main->cur_iMCU_row = 0;	/* initialize counters */
+  main->rowgroup_ctr = 0;
+  main->suspended = FALSE;
+  main->pass_mode = pass_mode;	/* save mode for use by process_data */
+
+  switch (pass_mode) {
+  case JBUF_PASS_THRU:
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+    if (main->whole_image[0] != NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+#endif
+    main->pub.process_data = process_data_simple_main;
+    break;
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+  case JBUF_SAVE_SOURCE:
+  case JBUF_CRANK_DEST:
+  case JBUF_SAVE_AND_PASS:
+    if (main->whole_image[0] == NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    main->pub.process_data = process_data_buffer_main;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    break;
+  }
+}
+
+
+/*
+ * Process some data.
+ * This routine handles the simple pass-through mode,
+ * where we have only a strip buffer.
+ */
+
+METHODDEF(void)
+process_data_simple_main (j_compress_ptr cinfo,
+			  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+			  JDIMENSION in_rows_avail)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+
+  while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
+    /* Read input data if we haven't filled the main buffer yet */
+    if (main->rowgroup_ctr < DCTSIZE)
+      (*cinfo->prep->pre_process_data) (cinfo,
+					input_buf, in_row_ctr, in_rows_avail,
+					main->buffer, &main->rowgroup_ctr,
+					(JDIMENSION) DCTSIZE);
+
+    /* If we don't have a full iMCU row buffered, return to application for
+     * more data.  Note that preprocessor will always pad to fill the iMCU row
+     * at the bottom of the image.
+     */
+    if (main->rowgroup_ctr != DCTSIZE)
+      return;
+
+    /* Send the completed row to the compressor */
+    if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
+      /* If compressor did not consume the whole row, then we must need to
+       * suspend processing and return to the application.  In this situation
+       * we pretend we didn't yet consume the last input row; otherwise, if
+       * it happened to be the last row of the image, the application would
+       * think we were done.
+       */
+      if (! main->suspended) {
+	(*in_row_ctr)--;
+	main->suspended = TRUE;
+      }
+      return;
+    }
+    /* We did finish the row.  Undo our little suspension hack if a previous
+     * call suspended; then mark the main buffer empty.
+     */
+    if (main->suspended) {
+      (*in_row_ctr)++;
+      main->suspended = FALSE;
+    }
+    main->rowgroup_ctr = 0;
+    main->cur_iMCU_row++;
+  }
+}
+
+
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+
+/*
+ * Process some data.
+ * This routine handles all of the modes that use a full-size buffer.
+ */
+
+METHODDEF(void)
+process_data_buffer_main (j_compress_ptr cinfo,
+			  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+			  JDIMENSION in_rows_avail)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  int ci;
+  jpeg_component_info *compptr;
+  boolean writing = (main->pass_mode != JBUF_CRANK_DEST);
+
+  while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
+    /* Realign the virtual buffers if at the start of an iMCU row. */
+    if (main->rowgroup_ctr == 0) {
+      for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	   ci++, compptr++) {
+	main->buffer[ci] = (*cinfo->mem->access_virt_sarray)
+	  ((j_common_ptr) cinfo, main->whole_image[ci],
+	   main->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE),
+	   (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing);
+      }
+      /* In a read pass, pretend we just read some source data. */
+      if (! writing) {
+	*in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE;
+	main->rowgroup_ctr = DCTSIZE;
+      }
+    }
+
+    /* If a write pass, read input data until the current iMCU row is full. */
+    /* Note: preprocessor will pad if necessary to fill the last iMCU row. */
+    if (writing) {
+      (*cinfo->prep->pre_process_data) (cinfo,
+					input_buf, in_row_ctr, in_rows_avail,
+					main->buffer, &main->rowgroup_ctr,
+					(JDIMENSION) DCTSIZE);
+      /* Return to application if we need more data to fill the iMCU row. */
+      if (main->rowgroup_ctr < DCTSIZE)
+	return;
+    }
+
+    /* Emit data, unless this is a sink-only pass. */
+    if (main->pass_mode != JBUF_SAVE_SOURCE) {
+      if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
+	/* If compressor did not consume the whole row, then we must need to
+	 * suspend processing and return to the application.  In this situation
+	 * we pretend we didn't yet consume the last input row; otherwise, if
+	 * it happened to be the last row of the image, the application would
+	 * think we were done.
+	 */
+	if (! main->suspended) {
+	  (*in_row_ctr)--;
+	  main->suspended = TRUE;
+	}
+	return;
+      }
+      /* We did finish the row.  Undo our little suspension hack if a previous
+       * call suspended; then mark the main buffer empty.
+       */
+      if (main->suspended) {
+	(*in_row_ctr)++;
+	main->suspended = FALSE;
+      }
+    }
+
+    /* If get here, we are done with this iMCU row.  Mark buffer empty. */
+    main->rowgroup_ctr = 0;
+    main->cur_iMCU_row++;
+  }
+}
+
+#endif /* FULL_MAIN_BUFFER_SUPPORTED */
+
+
+/*
+ * Initialize main buffer controller.
+ */
+
+GLOBAL(void)
+jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer)
+{
+  my_main_ptr main;
+  int ci;
+  jpeg_component_info *compptr;
+
+  main = (my_main_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_main_controller));
+  cinfo->main = (struct jpeg_c_main_controller *) main;
+  main->pub.start_pass = start_pass_main;
+
+  /* We don't need to create a buffer in raw-data mode. */
+  if (cinfo->raw_data_in)
+    return;
+
+  /* Create the buffer.  It holds downsampled data, so each component
+   * may be of a different size.
+   */
+  if (need_full_buffer) {
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+    /* Allocate a full-image virtual array for each component */
+    /* Note we pad the bottom to a multiple of the iMCU height */
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      main->whole_image[ci] = (*cinfo->mem->request_virt_sarray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+	 compptr->width_in_blocks * DCTSIZE,
+	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
+				(long) compptr->v_samp_factor) * DCTSIZE,
+	 (JDIMENSION) (compptr->v_samp_factor * DCTSIZE));
+    }
+#else
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+#endif
+  } else {
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+    main->whole_image[0] = NULL; /* flag for no virtual arrays */
+#endif
+    /* Allocate a strip buffer for each component */
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      main->buffer[ci] = (*cinfo->mem->alloc_sarray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE,
+	 compptr->width_in_blocks * DCTSIZE,
+	 (JDIMENSION) (compptr->v_samp_factor * DCTSIZE));
+    }
+  }
+}

mozilla/jpeg/jcmarker.c

@@ -0,0 +1,662 @@
+/*
+ * jcmarker.c
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to write JPEG datastream markers.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+typedef enum {			/* JPEG marker codes */
+  M_SOF0  = 0xc0,
+  M_SOF1  = 0xc1,
+  M_SOF2  = 0xc2,
+  M_SOF3  = 0xc3,
+  
+  M_SOF5  = 0xc5,
+  M_SOF6  = 0xc6,
+  M_SOF7  = 0xc7,
+  
+  M_JPG   = 0xc8,
+  M_SOF9  = 0xc9,
+  M_SOF10 = 0xca,
+  M_SOF11 = 0xcb,
+  
+  M_SOF13 = 0xcd,
+  M_SOF14 = 0xce,
+  M_SOF15 = 0xcf,
+  
+  M_DHT   = 0xc4,
+  
+  M_DAC   = 0xcc,
+  
+  M_RST0  = 0xd0,
+  M_RST1  = 0xd1,
+  M_RST2  = 0xd2,
+  M_RST3  = 0xd3,
+  M_RST4  = 0xd4,
+  M_RST5  = 0xd5,
+  M_RST6  = 0xd6,
+  M_RST7  = 0xd7,
+  
+  M_SOI   = 0xd8,
+  M_EOI   = 0xd9,
+  M_SOS   = 0xda,
+  M_DQT   = 0xdb,
+  M_DNL   = 0xdc,
+  M_DRI   = 0xdd,
+  M_DHP   = 0xde,
+  M_EXP   = 0xdf,
+  
+  M_APP0  = 0xe0,
+  M_APP1  = 0xe1,
+  M_APP2  = 0xe2,
+  M_APP3  = 0xe3,
+  M_APP4  = 0xe4,
+  M_APP5  = 0xe5,
+  M_APP6  = 0xe6,
+  M_APP7  = 0xe7,
+  M_APP8  = 0xe8,
+  M_APP9  = 0xe9,
+  M_APP10 = 0xea,
+  M_APP11 = 0xeb,
+  M_APP12 = 0xec,
+  M_APP13 = 0xed,
+  M_APP14 = 0xee,
+  M_APP15 = 0xef,
+  
+  M_JPG0  = 0xf0,
+  M_JPG13 = 0xfd,
+  M_COM   = 0xfe,
+  
+  M_TEM   = 0x01
+} JPEG_MARKER;
+
+
+/* Private state */
+
+typedef struct {
+  struct jpeg_marker_writer pub; /* public fields */
+
+  unsigned int last_restart_interval; /* last DRI value emitted; 0 after SOI */
+} my_marker_writer;
+
+typedef my_marker_writer * my_marker_ptr;
+
+
+/*
+ * Basic output routines.
+ *
+ * Note that we do not support suspension while writing a marker.
+ * Therefore, an application using suspension must ensure that there is
+ * enough buffer space for the initial markers (typ. 600-700 bytes) before
+ * calling jpeg_start_compress, and enough space to write the trailing EOI
+ * (a few bytes) before calling jpeg_finish_compress.  Multipass compression
+ * modes are not supported at all with suspension, so those two are the only
+ * points where markers will be written.
+ */
+
+LOCAL(void)
+emit_byte (j_compress_ptr cinfo, int16 val)
+/* Emit a byte */
+{
+  struct jpeg_destination_mgr * dest = cinfo->dest;
+
+  *(dest->next_output_byte)++ = (JOCTET) val;
+  if (--dest->free_in_buffer == 0) {
+    if (! (*dest->empty_output_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+  }
+}
+
+
+LOCAL(void)
+emit_marker (j_compress_ptr cinfo, JPEG_MARKER mark)
+/* Emit a marker code */
+{
+  emit_byte(cinfo, 0xFF);
+  emit_byte(cinfo, (int16) mark);
+}
+
+
+LOCAL(void)
+emit_2bytes (j_compress_ptr cinfo, int16 value)
+/* Emit a 2-byte integer; these are always MSB first in JPEG files */
+{
+  emit_byte(cinfo, (value >> 8) & 0xFF);
+  emit_byte(cinfo, value & 0xFF);
+}
+
+
+/*
+ * Routines to write specific marker types.
+ */
+
+LOCAL(int16)
+emit_dqt (j_compress_ptr cinfo, int16 index)
+/* Emit a DQT marker */
+/* Returns the precision used (0 = 8bits, 1 = 16bits) for baseline checking */
+{
+  JQUANT_TBL * qtbl = cinfo->quant_tbl_ptrs[index];
+  int16 prec;
+  int16 i;
+
+  if (qtbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index);
+
+  prec = 0;
+  for (i = 0; i < DCTSIZE2; i++) {
+    if (qtbl->quantval[i] > 255)
+      prec = 1;
+  }
+
+  if (! qtbl->sent_table) {
+    emit_marker(cinfo, M_DQT);
+
+    emit_2bytes(cinfo, prec ? DCTSIZE2*2 + 1 + 2 : DCTSIZE2 + 1 + 2);
+
+    emit_byte(cinfo, index + (prec<<4));
+
+    for (i = 0; i < DCTSIZE2; i++) {
+      /* The table entries must be emitted in zigzag order. */
+      unsigned int qval = qtbl->quantval[jpeg_natural_order[i]];
+      if (prec)
+	emit_byte(cinfo, (int16) (qval >> 8));
+      emit_byte(cinfo, (int16) (qval & 0xFF));
+    }
+
+    qtbl->sent_table = TRUE;
+  }
+
+  return prec;
+}
+
+
+LOCAL(void)
+emit_dht (j_compress_ptr cinfo, int16 index, boolean is_ac)
+/* Emit a DHT marker */
+{
+  JHUFF_TBL * htbl;
+  int16 length, i;
+  
+  if (is_ac) {
+    htbl = cinfo->ac_huff_tbl_ptrs[index];
+    index += 0x10;		/* output index has AC bit set */
+  } else {
+    htbl = cinfo->dc_huff_tbl_ptrs[index];
+  }
+
+  if (htbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, index);
+  
+  if (! htbl->sent_table) {
+    emit_marker(cinfo, M_DHT);
+    
+    length = 0;
+    for (i = 1; i <= 16; i++)
+      length += htbl->bits[i];
+    
+    emit_2bytes(cinfo, length + 2 + 1 + 16);
+    emit_byte(cinfo, index);
+    
+    for (i = 1; i <= 16; i++)
+      emit_byte(cinfo, htbl->bits[i]);
+    
+    for (i = 0; i < length; i++)
+      emit_byte(cinfo, htbl->huffval[i]);
+    
+    htbl->sent_table = TRUE;
+  }
+}
+
+
+LOCAL(void)
+emit_dac (j_compress_ptr cinfo)
+/* Emit a DAC marker */
+/* Since the useful info is so small, we want to emit all the tables in */
+/* one DAC marker.  Therefore this routine does its own scan of the table. */
+{
+#ifdef C_ARITH_CODING_SUPPORTED
+  char dc_in_use[NUM_ARITH_TBLS];
+  char ac_in_use[NUM_ARITH_TBLS];
+  int16 length, i;
+  jpeg_component_info *compptr;
+  
+  for (i = 0; i < NUM_ARITH_TBLS; i++)
+    dc_in_use[i] = ac_in_use[i] = 0;
+  
+  for (i = 0; i < cinfo->comps_in_scan; i++) {
+    compptr = cinfo->cur_comp_info[i];
+    dc_in_use[compptr->dc_tbl_no] = 1;
+    ac_in_use[compptr->ac_tbl_no] = 1;
+  }
+  
+  length = 0;
+  for (i = 0; i < NUM_ARITH_TBLS; i++)
+    length += dc_in_use[i] + ac_in_use[i];
+  
+  emit_marker(cinfo, M_DAC);
+  
+  emit_2bytes(cinfo, length*2 + 2);
+  
+  for (i = 0; i < NUM_ARITH_TBLS; i++) {
+    if (dc_in_use[i]) {
+      emit_byte(cinfo, i);
+      emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4));
+    }
+    if (ac_in_use[i]) {
+      emit_byte(cinfo, i + 0x10);
+      emit_byte(cinfo, cinfo->arith_ac_K[i]);
+    }
+  }
+#endif /* C_ARITH_CODING_SUPPORTED */
+}
+
+
+LOCAL(void)
+emit_dri (j_compress_ptr cinfo)
+/* Emit a DRI marker */
+{
+  emit_marker(cinfo, M_DRI);
+  
+  emit_2bytes(cinfo, 4);	/* fixed length */
+
+  emit_2bytes(cinfo, (int16) cinfo->restart_interval);
+}
+
+
+LOCAL(void)
+emit_sof (j_compress_ptr cinfo, JPEG_MARKER code)
+/* Emit a SOF marker */
+{
+  int16 ci;
+  jpeg_component_info *compptr;
+  
+  emit_marker(cinfo, code);
+  
+  emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */
+
+  /* Make sure image isn't bigger than SOF field can handle */
+  if ((long) cinfo->image_height > 65535L ||
+      (long) cinfo->image_width > 65535L)
+    ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535);
+
+  emit_byte(cinfo, cinfo->data_precision);
+  emit_2bytes(cinfo, (int16) cinfo->image_height);
+  emit_2bytes(cinfo, (int16) cinfo->image_width);
+
+  emit_byte(cinfo, cinfo->num_components);
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    emit_byte(cinfo, compptr->component_id);
+    emit_byte(cinfo, (compptr->h_samp_factor << 4) + compptr->v_samp_factor);
+    emit_byte(cinfo, compptr->quant_tbl_no);
+  }
+}
+
+
+LOCAL(void)
+emit_sos (j_compress_ptr cinfo)
+/* Emit a SOS marker */
+{
+  int16 i, td, ta;
+  jpeg_component_info *compptr;
+  
+  emit_marker(cinfo, M_SOS);
+  
+  emit_2bytes(cinfo, 2 * cinfo->comps_in_scan + 2 + 1 + 3); /* length */
+  
+  emit_byte(cinfo, cinfo->comps_in_scan);
+  
+  for (i = 0; i < cinfo->comps_in_scan; i++) {
+    compptr = cinfo->cur_comp_info[i];
+    emit_byte(cinfo, compptr->component_id);
+    td = compptr->dc_tbl_no;
+    ta = compptr->ac_tbl_no;
+    if (cinfo->progressive_mode) {
+      /* Progressive mode: only DC or only AC tables are used in one scan;
+       * furthermore, Huffman coding of DC refinement uses no table at all.
+       * We emit 0 for unused field(s); this is recommended by the P&M text
+       * but does not seem to be specified in the standard.
+       */
+      if (cinfo->Ss == 0) {
+	ta = 0;			/* DC scan */
+	if (cinfo->Ah != 0 && !cinfo->arith_code)
+	  td = 0;		/* no DC table either */
+      } else {
+	td = 0;			/* AC scan */
+      }
+    }
+    emit_byte(cinfo, (td << 4) + ta);
+  }
+
+  emit_byte(cinfo, cinfo->Ss);
+  emit_byte(cinfo, cinfo->Se);
+  emit_byte(cinfo, (cinfo->Ah << 4) + cinfo->Al);
+}
+
+
+LOCAL(void)
+emit_jfif_app0 (j_compress_ptr cinfo)
+/* Emit a JFIF-compliant APP0 marker */
+{
+  /*
+   * Length of APP0 block	(2 bytes)
+   * Block ID			(4 bytes - ASCII "JFIF")
+   * Zero byte			(1 byte to terminate the ID string)
+   * Version Major, Minor	(2 bytes - major first)
+   * Units			(1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm)
+   * Xdpu			(2 bytes - dots per unit horizontal)
+   * Ydpu			(2 bytes - dots per unit vertical)
+   * Thumbnail X size		(1 byte)
+   * Thumbnail Y size		(1 byte)
+   */
+  
+  emit_marker(cinfo, M_APP0);
+  
+  emit_2bytes(cinfo, 2 + 4 + 1 + 2 + 1 + 2 + 2 + 1 + 1); /* length */
+
+  emit_byte(cinfo, 0x4A);	/* Identifier: ASCII "JFIF" */
+  emit_byte(cinfo, 0x46);
+  emit_byte(cinfo, 0x49);
+  emit_byte(cinfo, 0x46);
+  emit_byte(cinfo, 0);
+  emit_byte(cinfo, cinfo->JFIF_major_version); /* Version fields */
+  emit_byte(cinfo, cinfo->JFIF_minor_version);
+  emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */
+  emit_2bytes(cinfo, (int16) cinfo->X_density);
+  emit_2bytes(cinfo, (int16) cinfo->Y_density);
+  emit_byte(cinfo, 0);		/* No thumbnail image */
+  emit_byte(cinfo, 0);
+}
+
+
+LOCAL(void)
+emit_adobe_app14 (j_compress_ptr cinfo)
+/* Emit an Adobe APP14 marker */
+{
+  /*
+   * Length of APP14 block	(2 bytes)
+   * Block ID			(5 bytes - ASCII "Adobe")
+   * Version Number		(2 bytes - currently 100)
+   * Flags0			(2 bytes - currently 0)
+   * Flags1			(2 bytes - currently 0)
+   * Color transform		(1 byte)
+   *
+   * Although Adobe TN 5116 mentions Version = 101, all the Adobe files
+   * now in circulation seem to use Version = 100, so that's what we write.
+   *
+   * We write the color transform byte as 1 if the JPEG color space is
+   * YCbCr, 2 if it's YCCK, 0 otherwise.  Adobe's definition has to do with
+   * whether the encoder performed a transformation, which is pretty useless.
+   */
+  
+  emit_marker(cinfo, M_APP14);
+  
+  emit_2bytes(cinfo, 2 + 5 + 2 + 2 + 2 + 1); /* length */
+
+  emit_byte(cinfo, 0x41);	/* Identifier: ASCII "Adobe" */
+  emit_byte(cinfo, 0x64);
+  emit_byte(cinfo, 0x6F);
+  emit_byte(cinfo, 0x62);
+  emit_byte(cinfo, 0x65);
+  emit_2bytes(cinfo, 100);	/* Version */
+  emit_2bytes(cinfo, 0);	/* Flags0 */
+  emit_2bytes(cinfo, 0);	/* Flags1 */
+  switch (cinfo->jpeg_color_space) {
+  case JCS_YCbCr:
+    emit_byte(cinfo, 1);	/* Color transform = 1 */
+    break;
+  case JCS_YCCK:
+    emit_byte(cinfo, 2);	/* Color transform = 2 */
+    break;
+  default:
+    emit_byte(cinfo, 0);	/* Color transform = 0 */
+    break;
+  }
+}
+
+
+/*
+ * These routines allow writing an arbitrary marker with parameters.
+ * The only intended use is to emit COM or APPn markers after calling
+ * write_file_header and before calling write_frame_header.
+ * Other uses are not guaranteed to produce desirable results.
+ * Counting the parameter bytes properly is the caller's responsibility.
+ */
+
+METHODDEF(void)
+write_marker_header (j_compress_ptr cinfo, int16 marker, unsigned int datalen)
+/* Emit an arbitrary marker header */
+{
+  if (datalen > (unsigned int) 65533)		/* safety check */
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
+  emit_marker(cinfo, (JPEG_MARKER) marker);
+
+  emit_2bytes(cinfo, (int16) (datalen + 2));	/* total length */
+}
+
+METHODDEF(void)
+write_marker_byte (j_compress_ptr cinfo, int16 val)
+/* Emit one byte of marker parameters following write_marker_header */
+{
+  emit_byte(cinfo, val);
+}
+
+
+/*
+ * Write datastream header.
+ * This consists of an SOI and optional APPn markers.
+ * We recommend use of the JFIF marker, but not the Adobe marker,
+ * when using YCbCr or grayscale data.  The JFIF marker should NOT
+ * be used for any other JPEG colorspace.  The Adobe marker is helpful
+ * to distinguish RGB, CMYK, and YCCK colorspaces.
+ * Note that an application can write additional header markers after
+ * jpeg_start_compress returns.
+ */
+
+METHODDEF(void)
+write_file_header (j_compress_ptr cinfo)
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+
+  emit_marker(cinfo, M_SOI);	/* first the SOI */
+
+  /* SOI is defined to reset restart interval to 0 */
+  marker->last_restart_interval = 0;
+
+  if (cinfo->write_JFIF_header)	/* next an optional JFIF APP0 */
+    emit_jfif_app0(cinfo);
+  if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */
+    emit_adobe_app14(cinfo);
+}
+
+
+/*
+ * Write frame header.
+ * This consists of DQT and SOFn markers.
+ * Note that we do not emit the SOF until we have emitted the DQT(s).
+ * This avoids compatibility problems with incorrect implementations that
+ * try to error-check the quant table numbers as soon as they see the SOF.
+ */
+
+METHODDEF(void)
+write_frame_header (j_compress_ptr cinfo)
+{
+  int16 ci, prec;
+  boolean is_baseline;
+  jpeg_component_info *compptr;
+  
+  /* Emit DQT for each quantization table.
+   * Note that emit_dqt() suppresses any duplicate tables.
+   */
+  prec = 0;
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    prec += emit_dqt(cinfo, compptr->quant_tbl_no);
+  }
+  /* now prec is nonzero iff there are any 16-bit quant tables. */
+
+  /* Check for a non-baseline specification.
+   * Note we assume that Huffman table numbers won't be changed later.
+   */
+  if (cinfo->arith_code || cinfo->progressive_mode ||
+      cinfo->data_precision != 8) {
+    is_baseline = FALSE;
+  } else {
+    is_baseline = TRUE;
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      if (compptr->dc_tbl_no > 1 || compptr->ac_tbl_no > 1)
+	is_baseline = FALSE;
+    }
+    if (prec && is_baseline) {
+      is_baseline = FALSE;
+      /* If it's baseline except for quantizer size, warn the user */
+      TRACEMS(cinfo, 0, JTRC_16BIT_TABLES);
+    }
+  }
+
+  /* Emit the proper SOF marker */
+  if (cinfo->arith_code) {
+    emit_sof(cinfo, M_SOF9);	/* SOF code for arithmetic coding */
+  } else {
+    if (cinfo->progressive_mode)
+      emit_sof(cinfo, M_SOF2);	/* SOF code for progressive Huffman */
+    else if (is_baseline)
+      emit_sof(cinfo, M_SOF0);	/* SOF code for baseline implementation */
+    else
+      emit_sof(cinfo, M_SOF1);	/* SOF code for non-baseline Huffman file */
+  }
+}
+
+
+/*
+ * Write scan header.
+ * This consists of DHT or DAC markers, optional DRI, and SOS.
+ * Compressed data will be written following the SOS.
+ */
+
+METHODDEF(void)
+write_scan_header (j_compress_ptr cinfo)
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+  int16 i;
+  jpeg_component_info *compptr;
+
+  if (cinfo->arith_code) {
+    /* Emit arith conditioning info.  We may have some duplication
+     * if the file has multiple scans, but it's so small it's hardly
+     * worth worrying about.
+     */
+    emit_dac(cinfo);
+  } else {
+    /* Emit Huffman tables.
+     * Note that emit_dht() suppresses any duplicate tables.
+     */
+    for (i = 0; i < cinfo->comps_in_scan; i++) {
+      compptr = cinfo->cur_comp_info[i];
+      if (cinfo->progressive_mode) {
+	/* Progressive mode: only DC or only AC tables are used in one scan */
+	if (cinfo->Ss == 0) {
+	  if (cinfo->Ah == 0)	/* DC needs no table for refinement scan */
+	    emit_dht(cinfo, compptr->dc_tbl_no, FALSE);
+	} else {
+	  emit_dht(cinfo, compptr->ac_tbl_no, TRUE);
+	}
+      } else {
+	/* Sequential mode: need both DC and AC tables */
+	emit_dht(cinfo, compptr->dc_tbl_no, FALSE);
+	emit_dht(cinfo, compptr->ac_tbl_no, TRUE);
+      }
+    }
+  }
+
+  /* Emit DRI if required --- note that DRI value could change for each scan.
+   * We avoid wasting space with unnecessary DRIs, however.
+   */
+  if (cinfo->restart_interval != marker->last_restart_interval) {
+    emit_dri(cinfo);
+    marker->last_restart_interval = cinfo->restart_interval;
+  }
+
+  emit_sos(cinfo);
+}
+
+
+/*
+ * Write datastream trailer.
+ */
+
+METHODDEF(void)
+write_file_trailer (j_compress_ptr cinfo)
+{
+  emit_marker(cinfo, M_EOI);
+}
+
+
+/*
+ * Write an abbreviated table-specification datastream.
+ * This consists of SOI, DQT and DHT tables, and EOI.
+ * Any table that is defined and not marked sent_table = TRUE will be
+ * emitted.  Note that all tables will be marked sent_table = TRUE at exit.
+ */
+
+METHODDEF(void)
+write_tables_only (j_compress_ptr cinfo)
+{
+  int16 i;
+
+  emit_marker(cinfo, M_SOI);
+
+  for (i = 0; i < NUM_QUANT_TBLS; i++) {
+    if (cinfo->quant_tbl_ptrs[i] != NULL)
+      (void) emit_dqt(cinfo, i);
+  }
+
+  if (! cinfo->arith_code) {
+    for (i = 0; i < NUM_HUFF_TBLS; i++) {
+      if (cinfo->dc_huff_tbl_ptrs[i] != NULL)
+	emit_dht(cinfo, i, FALSE);
+      if (cinfo->ac_huff_tbl_ptrs[i] != NULL)
+	emit_dht(cinfo, i, TRUE);
+    }
+  }
+
+  emit_marker(cinfo, M_EOI);
+}
+
+
+/*
+ * Initialize the marker writer module.
+ */
+
+GLOBAL(void)
+jinit_marker_writer (j_compress_ptr cinfo)
+{
+  my_marker_ptr marker;
+
+  /* Create the subobject */
+  marker = (my_marker_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_marker_writer));
+  cinfo->marker = (struct jpeg_marker_writer *) marker;
+  /* Initialize method pointers */
+  marker->pub.write_file_header = write_file_header;
+  marker->pub.write_frame_header = write_frame_header;
+  marker->pub.write_scan_header = write_scan_header;
+  marker->pub.write_file_trailer = write_file_trailer;
+  marker->pub.write_tables_only = write_tables_only;
+  marker->pub.write_marker_header = write_marker_header;
+  marker->pub.write_marker_byte = write_marker_byte;
+  /* Initialize private state */
+  marker->last_restart_interval = 0;
+}

mozilla/jpeg/jcmaster.c

@@ -0,0 +1,590 @@
+/*
+ * jcmaster.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains master control logic for the JPEG compressor.
+ * These routines are concerned with parameter validation, initial setup,
+ * and inter-pass control (determining the number of passes and the work 
+ * to be done in each pass).
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Private state */
+
+typedef enum {
+	main_pass,		/* input data, also do first output step */
+	huff_opt_pass,		/* Huffman code optimization pass */
+	output_pass		/* data output pass */
+} c_pass_type;
+
+typedef struct {
+  struct jpeg_comp_master pub;	/* public fields */
+
+  c_pass_type pass_type;	/* the type of the current pass */
+
+  int pass_number;		/* # of passes completed */
+  int total_passes;		/* total # of passes needed */
+
+  int scan_number;		/* current index in scan_info[] */
+} my_comp_master;
+
+typedef my_comp_master * my_master_ptr;
+
+
+/*
+ * Support routines that do various essential calculations.
+ */
+
+LOCAL(void)
+initial_setup (j_compress_ptr cinfo)
+/* Do computations that are needed before master selection phase */
+{
+  int ci;
+  jpeg_component_info *compptr;
+  long samplesperrow;
+  JDIMENSION jd_samplesperrow;
+
+  /* Sanity check on image dimensions */
+  if (cinfo->image_height <= 0 || cinfo->image_width <= 0
+      || cinfo->num_components <= 0 || cinfo->input_components <= 0)
+    ERREXIT(cinfo, JERR_EMPTY_IMAGE);
+
+  /* Make sure image isn't bigger than I can handle */
+  if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION ||
+      (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
+    ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
+
+  /* Width of an input scanline must be representable as JDIMENSION. */
+  samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components;
+  jd_samplesperrow = (JDIMENSION) samplesperrow;
+  if ((long) jd_samplesperrow != samplesperrow)
+    ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
+
+  /* For now, precision must match compiled-in value... */
+  if (cinfo->data_precision != BITS_IN_JSAMPLE)
+    ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
+
+  /* Check that number of components won't exceed internal array sizes */
+  if (cinfo->num_components > MAX_COMPONENTS)
+    ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+	     MAX_COMPONENTS);
+
+  /* Compute maximum sampling factors; check factor validity */
+  cinfo->max_h_samp_factor = 1;
+  cinfo->max_v_samp_factor = 1;
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR ||
+	compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR)
+      ERREXIT(cinfo, JERR_BAD_SAMPLING);
+    cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor,
+				   compptr->h_samp_factor);
+    cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor,
+				   compptr->v_samp_factor);
+  }
+
+  /* Compute dimensions of components */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Fill in the correct component_index value; don't rely on application */
+    compptr->component_index = ci;
+    /* For compression, we never do DCT scaling. */
+    compptr->DCT_scaled_size = DCTSIZE;
+    /* Size in DCT blocks */
+    compptr->width_in_blocks = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
+		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
+    compptr->height_in_blocks = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
+		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
+    /* Size in samples */
+    compptr->downsampled_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
+		    (long) cinfo->max_h_samp_factor);
+    compptr->downsampled_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
+		    (long) cinfo->max_v_samp_factor);
+    /* Mark component needed (this flag isn't actually used for compression) */
+    compptr->component_needed = TRUE;
+  }
+
+  /* Compute number of fully interleaved MCU rows (number of times that
+   * main controller will call coefficient controller).
+   */
+  cinfo->total_iMCU_rows = (JDIMENSION)
+    jdiv_round_up((long) cinfo->image_height,
+		  (long) (cinfo->max_v_samp_factor*DCTSIZE));
+}
+
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+
+LOCAL(void)
+validate_script (j_compress_ptr cinfo)
+/* Verify that the scan script in cinfo->scan_info[] is valid; also
+ * determine whether it uses progressive JPEG, and set cinfo->progressive_mode.
+ */
+{
+  const jpeg_scan_info * scanptr;
+  int scanno, ncomps, ci, coefi, thisi;
+  int Ss, Se, Ah, Al;
+  boolean component_sent[MAX_COMPONENTS];
+#ifdef C_PROGRESSIVE_SUPPORTED
+  int * last_bitpos_ptr;
+  int last_bitpos[MAX_COMPONENTS][DCTSIZE2];
+  /* -1 until that coefficient has been seen; then last Al for it */
+#endif
+
+  if (cinfo->num_scans <= 0)
+    ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0);
+
+  /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1;
+   * for progressive JPEG, no scan can have this.
+   */
+  scanptr = cinfo->scan_info;
+  if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) {
+#ifdef C_PROGRESSIVE_SUPPORTED
+    cinfo->progressive_mode = TRUE;
+    last_bitpos_ptr = & last_bitpos[0][0];
+    for (ci = 0; ci < cinfo->num_components; ci++) 
+      for (coefi = 0; coefi < DCTSIZE2; coefi++)
+	*last_bitpos_ptr++ = -1;
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+  } else {
+    cinfo->progressive_mode = FALSE;
+    for (ci = 0; ci < cinfo->num_components; ci++) 
+      component_sent[ci] = FALSE;
+  }
+
+  for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) {
+    /* Validate component indexes */
+    ncomps = scanptr->comps_in_scan;
+    if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN)
+      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN);
+    for (ci = 0; ci < ncomps; ci++) {
+      thisi = scanptr->component_index[ci];
+      if (thisi < 0 || thisi >= cinfo->num_components)
+	ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
+      /* Components must appear in SOF order within each scan */
+      if (ci > 0 && thisi <= scanptr->component_index[ci-1])
+	ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
+    }
+    /* Validate progression parameters */
+    Ss = scanptr->Ss;
+    Se = scanptr->Se;
+    Ah = scanptr->Ah;
+    Al = scanptr->Al;
+    if (cinfo->progressive_mode) {
+#ifdef C_PROGRESSIVE_SUPPORTED
+      /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that
+       * seems wrong: the upper bound ought to depend on data precision.
+       * Perhaps they really meant 0..N+1 for N-bit precision.
+       * Here we allow 0..10 for 8-bit data; Al larger than 10 results in
+       * out-of-range reconstructed DC values during the first DC scan,
+       * which might cause problems for some decoders.
+       */
+#if BITS_IN_JSAMPLE == 8
+#define MAX_AH_AL 10
+#else
+#define MAX_AH_AL 13
+#endif
+      if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 ||
+	  Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL)
+	ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+      if (Ss == 0) {
+	if (Se != 0)		/* DC and AC together not OK */
+	  ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+      } else {
+	if (ncomps != 1)	/* AC scans must be for only one component */
+	  ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+      }
+      for (ci = 0; ci < ncomps; ci++) {
+	last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0];
+	if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */
+	  ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+	for (coefi = Ss; coefi <= Se; coefi++) {
+	  if (last_bitpos_ptr[coefi] < 0) {
+	    /* first scan of this coefficient */
+	    if (Ah != 0)
+	      ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+	  } else {
+	    /* not first scan */
+	    if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1)
+	      ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+	  }
+	  last_bitpos_ptr[coefi] = Al;
+	}
+      }
+#endif
+    } else {
+      /* For sequential JPEG, all progression parameters must be these: */
+      if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0)
+	ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+      /* Make sure components are not sent twice */
+      for (ci = 0; ci < ncomps; ci++) {
+	thisi = scanptr->component_index[ci];
+	if (component_sent[thisi])
+	  ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
+	component_sent[thisi] = TRUE;
+      }
+    }
+  }
+
+  /* Now verify that everything got sent. */
+  if (cinfo->progressive_mode) {
+#ifdef C_PROGRESSIVE_SUPPORTED
+    /* For progressive mode, we only check that at least some DC data
+     * got sent for each component; the spec does not require that all bits
+     * of all coefficients be transmitted.  Would it be wiser to enforce
+     * transmission of all coefficient bits??
+     */
+    for (ci = 0; ci < cinfo->num_components; ci++) {
+      if (last_bitpos[ci][0] < 0)
+	ERREXIT(cinfo, JERR_MISSING_DATA);
+    }
+#endif
+  } else {
+    for (ci = 0; ci < cinfo->num_components; ci++) {
+      if (! component_sent[ci])
+	ERREXIT(cinfo, JERR_MISSING_DATA);
+    }
+  }
+}
+
+#endif /* C_MULTISCAN_FILES_SUPPORTED */
+
+
+LOCAL(void)
+select_scan_parameters (j_compress_ptr cinfo)
+/* Set up the scan parameters for the current scan */
+{
+  int ci;
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+  if (cinfo->scan_info != NULL) {
+    /* Prepare for current scan --- the script is already validated */
+    my_master_ptr master = (my_master_ptr) cinfo->master;
+    const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number;
+
+    cinfo->comps_in_scan = scanptr->comps_in_scan;
+    for (ci = 0; ci < scanptr->comps_in_scan; ci++) {
+      cinfo->cur_comp_info[ci] =
+	&cinfo->comp_info[scanptr->component_index[ci]];
+    }
+    cinfo->Ss = scanptr->Ss;
+    cinfo->Se = scanptr->Se;
+    cinfo->Ah = scanptr->Ah;
+    cinfo->Al = scanptr->Al;
+  }
+  else
+#endif
+  {
+    /* Prepare for single sequential-JPEG scan containing all components */
+    if (cinfo->num_components > MAX_COMPS_IN_SCAN)
+      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+	       MAX_COMPS_IN_SCAN);
+    cinfo->comps_in_scan = cinfo->num_components;
+    for (ci = 0; ci < cinfo->num_components; ci++) {
+      cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci];
+    }
+    cinfo->Ss = 0;
+    cinfo->Se = DCTSIZE2-1;
+    cinfo->Ah = 0;
+    cinfo->Al = 0;
+  }
+}
+
+
+LOCAL(void)
+per_scan_setup (j_compress_ptr cinfo)
+/* Do computations that are needed before processing a JPEG scan */
+/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */
+{
+  int ci, mcublks, tmp;
+  jpeg_component_info *compptr;
+  
+  if (cinfo->comps_in_scan == 1) {
+    
+    /* Noninterleaved (single-component) scan */
+    compptr = cinfo->cur_comp_info[0];
+    
+    /* Overall image size in MCUs */
+    cinfo->MCUs_per_row = compptr->width_in_blocks;
+    cinfo->MCU_rows_in_scan = compptr->height_in_blocks;
+    
+    /* For noninterleaved scan, always one block per MCU */
+    compptr->MCU_width = 1;
+    compptr->MCU_height = 1;
+    compptr->MCU_blocks = 1;
+    compptr->MCU_sample_width = DCTSIZE;
+    compptr->last_col_width = 1;
+    /* For noninterleaved scans, it is convenient to define last_row_height
+     * as the number of block rows present in the last iMCU row.
+     */
+    tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
+    if (tmp == 0) tmp = compptr->v_samp_factor;
+    compptr->last_row_height = tmp;
+    
+    /* Prepare array describing MCU composition */
+    cinfo->blocks_in_MCU = 1;
+    cinfo->MCU_membership[0] = 0;
+    
+  } else {
+    
+    /* Interleaved (multi-component) scan */
+    if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN)
+      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan,
+	       MAX_COMPS_IN_SCAN);
+    
+    /* Overall image size in MCUs */
+    cinfo->MCUs_per_row = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width,
+		    (long) (cinfo->max_h_samp_factor*DCTSIZE));
+    cinfo->MCU_rows_in_scan = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height,
+		    (long) (cinfo->max_v_samp_factor*DCTSIZE));
+    
+    cinfo->blocks_in_MCU = 0;
+    
+    for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+      compptr = cinfo->cur_comp_info[ci];
+      /* Sampling factors give # of blocks of component in each MCU */
+      compptr->MCU_width = compptr->h_samp_factor;
+      compptr->MCU_height = compptr->v_samp_factor;
+      compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
+      compptr->MCU_sample_width = compptr->MCU_width * DCTSIZE;
+      /* Figure number of non-dummy blocks in last MCU column & row */
+      tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
+      if (tmp == 0) tmp = compptr->MCU_width;
+      compptr->last_col_width = tmp;
+      tmp = (int) (compptr->height_in_blocks % compptr->MCU_height);
+      if (tmp == 0) tmp = compptr->MCU_height;
+      compptr->last_row_height = tmp;
+      /* Prepare array describing MCU composition */
+      mcublks = compptr->MCU_blocks;
+      if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU)
+	ERREXIT(cinfo, JERR_BAD_MCU_SIZE);
+      while (mcublks-- > 0) {
+	cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci;
+      }
+    }
+    
+  }
+
+  /* Convert restart specified in rows to actual MCU count. */
+  /* Note that count must fit in 16 bits, so we provide limiting. */
+  if (cinfo->restart_in_rows > 0) {
+    long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row;
+    cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L);
+  }
+}
+
+
+/*
+ * Per-pass setup.
+ * This is called at the beginning of each pass.  We determine which modules
+ * will be active during this pass and give them appropriate start_pass calls.
+ * We also set is_last_pass to indicate whether any more passes will be
+ * required.
+ */
+
+METHODDEF(void)
+prepare_for_pass (j_compress_ptr cinfo)
+{
+  my_master_ptr master = (my_master_ptr) cinfo->master;
+
+  switch (master->pass_type) {
+  case main_pass:
+    /* Initial pass: will collect input data, and do either Huffman
+     * optimization or data output for the first scan.
+     */
+    select_scan_parameters(cinfo);
+    per_scan_setup(cinfo);
+    if (! cinfo->raw_data_in) {
+      (*cinfo->cconvert->start_pass) (cinfo);
+      (*cinfo->downsample->start_pass) (cinfo);
+      (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU);
+    }
+    (*cinfo->fdct->start_pass) (cinfo);
+    (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding);
+    (*cinfo->coef->start_pass) (cinfo,
+				(master->total_passes > 1 ?
+				 JBUF_SAVE_AND_PASS : JBUF_PASS_THRU));
+    (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU);
+    if (cinfo->optimize_coding) {
+      /* No immediate data output; postpone writing frame/scan headers */
+      master->pub.call_pass_startup = FALSE;
+    } else {
+      /* Will write frame/scan headers at first jpeg_write_scanlines call */
+      master->pub.call_pass_startup = TRUE;
+    }
+    break;
+#ifdef ENTROPY_OPT_SUPPORTED
+  case huff_opt_pass:
+    /* Do Huffman optimization for a scan after the first one. */
+    select_scan_parameters(cinfo);
+    per_scan_setup(cinfo);
+    if (cinfo->Ss != 0 || cinfo->Ah == 0 || cinfo->arith_code) {
+      (*cinfo->entropy->start_pass) (cinfo, TRUE);
+      (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
+      master->pub.call_pass_startup = FALSE;
+      break;
+    }
+    /* Special case: Huffman DC refinement scans need no Huffman table
+     * and therefore we can skip the optimization pass for them.
+     */
+    master->pass_type = output_pass;
+    master->pass_number++;
+    /*FALLTHROUGH*/
+#endif
+  case output_pass:
+    /* Do a data-output pass. */
+    /* We need not repeat per-scan setup if prior optimization pass did it. */
+    if (! cinfo->optimize_coding) {
+      select_scan_parameters(cinfo);
+      per_scan_setup(cinfo);
+    }
+    (*cinfo->entropy->start_pass) (cinfo, FALSE);
+    (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
+    /* We emit frame/scan headers now */
+    if (master->scan_number == 0)
+      (*cinfo->marker->write_frame_header) (cinfo);
+    (*cinfo->marker->write_scan_header) (cinfo);
+    master->pub.call_pass_startup = FALSE;
+    break;
+  default:
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+  }
+
+  master->pub.is_last_pass = (master->pass_number == master->total_passes-1);
+
+  /* Set up progress monitor's pass info if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->completed_passes = master->pass_number;
+    cinfo->progress->total_passes = master->total_passes;
+  }
+}
+
+
+/*
+ * Special start-of-pass hook.
+ * This is called by jpeg_write_scanlines if call_pass_startup is TRUE.
+ * In single-pass processing, we need this hook because we don't want to
+ * write frame/scan headers during jpeg_start_compress; we want to let the
+ * application write COM markers etc. between jpeg_start_compress and the
+ * jpeg_write_scanlines loop.
+ * In multi-pass processing, this routine is not used.
+ */
+
+METHODDEF(void)
+pass_startup (j_compress_ptr cinfo)
+{
+  cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */
+
+  (*cinfo->marker->write_frame_header) (cinfo);
+  (*cinfo->marker->write_scan_header) (cinfo);
+}
+
+
+/*
+ * Finish up at end of pass.
+ */
+
+METHODDEF(void)
+finish_pass_master (j_compress_ptr cinfo)
+{
+  my_master_ptr master = (my_master_ptr) cinfo->master;
+
+  /* The entropy coder always needs an end-of-pass call,
+   * either to analyze statistics or to flush its output buffer.
+   */
+  (*cinfo->entropy->finish_pass) (cinfo);
+
+  /* Update state for next pass */
+  switch (master->pass_type) {
+  case main_pass:
+    /* next pass is either output of scan 0 (after optimization)
+     * or output of scan 1 (if no optimization).
+     */
+    master->pass_type = output_pass;
+    if (! cinfo->optimize_coding)
+      master->scan_number++;
+    break;
+  case huff_opt_pass:
+    /* next pass is always output of current scan */
+    master->pass_type = output_pass;
+    break;
+  case output_pass:
+    /* next pass is either optimization or output of next scan */
+    if (cinfo->optimize_coding)
+      master->pass_type = huff_opt_pass;
+    master->scan_number++;
+    break;
+  }
+
+  master->pass_number++;
+}
+
+
+/*
+ * Initialize master compression control.
+ */
+
+GLOBAL(void)
+jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
+{
+  my_master_ptr master;
+
+  master = (my_master_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(my_comp_master));
+  cinfo->master = (struct jpeg_comp_master *) master;
+  master->pub.prepare_for_pass = prepare_for_pass;
+  master->pub.pass_startup = pass_startup;
+  master->pub.finish_pass = finish_pass_master;
+  master->pub.is_last_pass = FALSE;
+
+  /* Validate parameters, determine derived values */
+  initial_setup(cinfo);
+
+  if (cinfo->scan_info != NULL) {
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+    validate_script(cinfo);
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+  } else {
+    cinfo->progressive_mode = FALSE;
+    cinfo->num_scans = 1;
+  }
+
+  if (cinfo->progressive_mode)	/*  TEMPORARY HACK ??? */
+    cinfo->optimize_coding = TRUE; /* assume default tables no good for progressive mode */
+
+  /* Initialize my private state */
+  if (transcode_only) {
+    /* no main pass in transcoding */
+    if (cinfo->optimize_coding)
+      master->pass_type = huff_opt_pass;
+    else
+      master->pass_type = output_pass;
+  } else {
+    /* for normal compression, first pass is always this type: */
+    master->pass_type = main_pass;
+  }
+  master->scan_number = 0;
+  master->pass_number = 0;
+  if (cinfo->optimize_coding)
+    master->total_passes = cinfo->num_scans * 2;
+  else
+    master->total_passes = cinfo->num_scans;
+}

mozilla/jpeg/jcomapi.c

@@ -0,0 +1,106 @@
+/*
+ * jcomapi.c
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains application interface routines that are used for both
+ * compression and decompression.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * Abort processing of a JPEG compression or decompression operation,
+ * but don't destroy the object itself.
+ *
+ * For this, we merely clean up all the nonpermanent memory pools.
+ * Note that temp files (virtual arrays) are not allowed to belong to
+ * the permanent pool, so we will be able to close all temp files here.
+ * Closing a data source or destination, if necessary, is the application's
+ * responsibility.
+ */
+
+GLOBAL(void)
+jpeg_abort (j_common_ptr cinfo)
+{
+  int pool;
+
+  /* Do nothing if called on a not-initialized or destroyed JPEG object. */
+  if (cinfo->mem == NULL)
+    return;
+
+  /* Releasing pools in reverse order might help avoid fragmentation
+   * with some (brain-damaged) malloc libraries.
+   */
+  for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) {
+    (*cinfo->mem->free_pool) (cinfo, pool);
+  }
+
+  /* Reset overall state for possible reuse of object */
+  if (cinfo->is_decompressor) {
+    cinfo->global_state = DSTATE_START;
+    /* Try to keep application from accessing now-deleted marker list.
+     * A bit kludgy to do it here, but this is the most central place.
+     */
+    ((j_decompress_ptr) cinfo)->marker_list = NULL;
+  } else {
+    cinfo->global_state = CSTATE_START;
+  }
+}
+
+
+/*
+ * Destruction of a JPEG object.
+ *
+ * Everything gets deallocated except the master jpeg_compress_struct itself
+ * and the error manager struct.  Both of these are supplied by the application
+ * and must be freed, if necessary, by the application.  (Often they are on
+ * the stack and so don't need to be freed anyway.)
+ * Closing a data source or destination, if necessary, is the application's
+ * responsibility.
+ */
+
+GLOBAL(void)
+jpeg_destroy (j_common_ptr cinfo)
+{
+  /* We need only tell the memory manager to release everything. */
+  /* NB: mem pointer is NULL if memory mgr failed to initialize. */
+  if (cinfo->mem != NULL)
+    (*cinfo->mem->self_destruct) (cinfo);
+  cinfo->mem = NULL;		/* be safe if jpeg_destroy is called twice */
+  cinfo->global_state = 0;	/* mark it destroyed */
+}
+
+
+/*
+ * Convenience routines for allocating quantization and Huffman tables.
+ * (Would jutils.c be a more reasonable place to put these?)
+ */
+
+GLOBAL(JQUANT_TBL *)
+jpeg_alloc_quant_table (j_common_ptr cinfo)
+{
+  JQUANT_TBL *tbl;
+
+  tbl = (JQUANT_TBL *)
+    (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL));
+  tbl->sent_table = FALSE;	/* make sure this is false in any new table */
+  return tbl;
+}
+
+
+GLOBAL(JHUFF_TBL *)
+jpeg_alloc_huff_table (j_common_ptr cinfo)
+{
+  JHUFF_TBL *tbl;
+
+  tbl = (JHUFF_TBL *)
+    (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL));
+  tbl->sent_table = FALSE;	/* make sure this is false in any new table */
+  return tbl;
+}

mozilla/jpeg/jconfig-mac-cw.h

@@ -0,0 +1,43 @@
+/* jconfig.h --- generated by ckconfig.c */
+/* see jconfig.doc for explanations */
+
+#define ALIGN_TYPE long /* memory alignment */
+#define NO_GETENV /* we do have the function, but it's dead */
+#ifdef __cplusplus
+#define INLINE inline /* we have them in C++ */
+#endif
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#undef TWO_FILE_COMMANDLINE	/* You may need this on non-Unix systems */
+#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */
+#undef DONT_USE_B_MODE
+/* #define PROGRESS_REPORT */	/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

mozilla/jpeg/jconfig.doc

@@ -0,0 +1,155 @@
+/*
+ * jconfig.doc
+ *
+ * Copyright (C) 1991-1994, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file documents the configuration options that are required to
+ * customize the JPEG software for a particular system.
+ *
+ * The actual configuration options for a particular installation are stored
+ * in jconfig.h.  On many machines, jconfig.h can be generated automatically
+ * or copied from one of the "canned" jconfig files that we supply.  But if
+ * you need to generate a jconfig.h file by hand, this file tells you how.
+ *
+ * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING.
+ * EDIT A COPY NAMED JCONFIG.H.
+ */
+
+
+/*
+ * These symbols indicate the properties of your machine or compiler.
+ * #define the symbol if yes, #undef it if no.
+ */
+
+/* Does your compiler support function prototypes?
+ * (If not, you also need to use ansi2knr, see install.doc)
+ */
+#define HAVE_PROTOTYPES
+
+/* Does your compiler support the declaration "unsigned char" ?
+ * How about "unsigned short" ?
+ */
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+
+/* Define "void" as "char" if your compiler doesn't know about type void.
+ * NOTE: be sure to define void such that "void *" represents the most general
+ * pointer type, e.g., that returned by malloc().
+ */
+/* #define void char */
+
+/* Define "const" as empty if your compiler doesn't know the "const" keyword.
+ */
+/* #define const */
+
+/* Define this if an ordinary "char" type is unsigned.
+ * If you're not sure, leaving it undefined will work at some cost in speed.
+ * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal.
+ */
+#undef CHAR_IS_UNSIGNED
+
+/* Define this if your system has an ANSI-conforming <stddef.h> file.
+ */
+#define HAVE_STDDEF_H
+
+/* Define this if your system has an ANSI-conforming <stdlib.h> file.
+ */
+#define HAVE_STDLIB_H
+
+/* Define this if your system does not have an ANSI/SysV <string.h>,
+ * but does have a BSD-style <strings.h>.
+ */
+#undef NEED_BSD_STRINGS
+
+/* Define this if your system does not provide typedef size_t in any of the
+ * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in
+ * <sys/types.h> instead.
+ */
+#undef NEED_SYS_TYPES_H
+
+/* For 80x86 machines, you need to define NEED_FAR_POINTERS,
+ * unless you are using a large-data memory model or 80386 flat-memory mode.
+ * On less brain-damaged CPUs this symbol must not be defined.
+ * (Defining this symbol causes large data structures to be referenced through
+ * "far" pointers and to be allocated with a special version of malloc.)
+ */
+#undef NEED_FAR_POINTERS
+
+/* Define this if your linker needs global names to be unique in less
+ * than the first 15 characters.
+ */
+#undef NEED_SHORT_EXTERNAL_NAMES
+
+/* Although a real ANSI C compiler can deal perfectly well with pointers to
+ * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI
+ * and pseudo-ANSI compilers get confused.  To keep one of these bozos happy,
+ * define INCOMPLETE_TYPES_BROKEN.  This is not recommended unless you
+ * actually get "missing structure definition" warnings or errors while
+ * compiling the JPEG code.
+ */
+#undef INCOMPLETE_TYPES_BROKEN
+
+
+/*
+ * The following options affect code selection within the JPEG library,
+ * but they don't need to be visible to applications using the library.
+ * To minimize application namespace pollution, the symbols won't be
+ * defined unless JPEG_INTERNALS has been defined.
+ */
+
+#ifdef JPEG_INTERNALS
+
+/* Define this if your compiler implements ">>" on signed values as a logical
+ * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift,
+ * which is the normal and rational definition.
+ */
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+
+#endif /* JPEG_INTERNALS */
+
+
+/*
+ * The remaining options do not affect the JPEG library proper,
+ * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c).
+ * Other applications can ignore these.
+ */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+/* These defines indicate which image (non-JPEG) file formats are allowed. */
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+/* Define this if you want to name both input and output files on the command
+ * line, rather than using stdout and optionally stdin.  You MUST do this if
+ * your system can't cope with binary I/O to stdin/stdout.  See comments at
+ * head of cjpeg.c or djpeg.c.
+ */
+#undef TWO_FILE_COMMANDLINE
+
+/* Define this if your system needs explicit cleanup of temporary files.
+ * This is crucial under MS-DOS, where the temporary "files" may be areas
+ * of extended memory; on most other systems it's not as important.
+ */
+#undef NEED_SIGNAL_CATCHER
+
+/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb").
+ * This is necessary on systems that distinguish text files from binary files,
+ * and is harmless on most systems that don't.  If you have one of the rare
+ * systems that complains about the "b" spec, define this symbol.
+ */
+#undef DONT_USE_B_MODE
+
+/* Define this if you want percent-done progress reports from cjpeg/djpeg.
+ */
+#undef PROGRESS_REPORT
+
+
+#endif /* JPEG_CJPEG_DJPEG */

mozilla/jpeg/jconfig.h

@@ -0,0 +1,94 @@
+/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+/*
+ * jconfig.h to configure the IJG JPEG library for the Mozilla/Netscape
+ * environment.  Note that there are also Mozilla mods in jmorecfg.h.
+ */
+
+#include "xp_core.h"            /* get XP_ symbols */
+
+
+/* We assume an ANSI C or C++ compilation environment */
+#define HAVE_PROTOTYPES 
+#define HAVE_UNSIGNED_CHAR 
+#define HAVE_UNSIGNED_SHORT 
+/* #define void char */
+/* #define const */
+#ifndef HAVE_STDDEF_H 
+#define HAVE_STDDEF_H 
+#endif /* HAVE_STDDEF_H */
+#ifndef HAVE_STDLIB_H
+#define HAVE_STDLIB_H 
+#endif /* HAVE_STDLIB_H */
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+/* Define this if you get warnings about undefined structures. */
+#undef INCOMPLETE_TYPES_BROKEN
+
+/* With this setting, the IJG code will work regardless of whether
+ * type "char" is signed or unsigned.
+ */
+#undef CHAR_IS_UNSIGNED
+
+
+/* defines that need not be visible to callers of the IJG library */
+
+#ifdef JPEG_INTERNALS
+
+/* If right shift of "long" quantities is unsigned on your machine,
+ * you'll have to define this.  Fortunately few people should need it.
+ */
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#ifdef XP_WIN                   /* MS Windows */
+
+/* In case we are using a compiler that only has 16-bit size_t: */
+#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
+
+#endif /* XP_WIN */
+
+#ifdef XP_MAC                   /* Macintosh */
+
+#define ALIGN_TYPE long         /* for sane memory alignment */
+#define NO_GETENV               /* we do have the function, but it's dead */
+
+#endif /* XP_MAC */
+
+#endif /* JPEG_INTERNALS */
+
+
+/* these defines are not interesting for building just the IJG library,
+ * but we leave 'em here anyway.
+ */
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#undef TWO_FILE_COMMANDLINE
+#undef NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT
+
+#endif /* JPEG_CJPEG_DJPEG */

mozilla/jpeg/jconfig.wat

@@ -0,0 +1,38 @@
+/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */
+/* see jconfig.doc for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#define CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS	/* Watcom uses flat 32-bit addressing */
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#undef TWO_FILE_COMMANDLINE	/* optional */
+#define USE_SETMODE		/* Needed to make one-file style work in Watcom */
+#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

mozilla/jpeg/jcparam.c

@@ -0,0 +1,610 @@
+/*
+ * jcparam.c
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains optional default-setting code for the JPEG compressor.
+ * Applications do not have to use this file, but those that don't use it
+ * must know a lot more about the innards of the JPEG code.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * Quantization table setup routines
+ */
+
+GLOBAL(void)
+jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
+		      const unsigned int *basic_table,
+		      int scale_factor, boolean force_baseline)
+/* Define a quantization table equal to the basic_table times
+ * a scale factor (given as a percentage).
+ * If force_baseline is TRUE, the computed quantization table entries
+ * are limited to 1..255 for JPEG baseline compatibility.
+ */
+{
+  JQUANT_TBL ** qtblptr;
+  int i;
+  long temp;
+
+  /* Safety check to ensure start_compress not called yet. */
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS)
+    ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl);
+
+  qtblptr = & cinfo->quant_tbl_ptrs[which_tbl];
+
+  if (*qtblptr == NULL)
+    *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo);
+
+  for (i = 0; i < DCTSIZE2; i++) {
+    temp = ((long) basic_table[i] * scale_factor + 50L) / 100L;
+    /* limit the values to the valid range */
+    if (temp <= 0L) temp = 1L;
+    if (temp > 32767L) temp = 32767L; /* max quantizer needed for 12 bits */
+    if (force_baseline && temp > 255L)
+      temp = 255L;		/* limit to baseline range if requested */
+    (*qtblptr)->quantval[i] = (UINT16) temp;
+  }
+
+  /* Initialize sent_table FALSE so table will be written to JPEG file. */
+  (*qtblptr)->sent_table = FALSE;
+}
+
+
+GLOBAL(void)
+jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
+			 boolean force_baseline)
+/* Set or change the 'quality' (quantization) setting, using default tables
+ * and a straight percentage-scaling quality scale.  In most cases it's better
+ * to use jpeg_set_quality (below); this entry point is provided for
+ * applications that insist on a linear percentage scaling.
+ */
+{
+  /* These are the sample quantization tables given in JPEG spec section K.1.
+   * The spec says that the values given produce "good" quality, and
+   * when divided by 2, "very good" quality.
+   */
+  static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = {
+    16,  11,  10,  16,  24,  40,  51,  61,
+    12,  12,  14,  19,  26,  58,  60,  55,
+    14,  13,  16,  24,  40,  57,  69,  56,
+    14,  17,  22,  29,  51,  87,  80,  62,
+    18,  22,  37,  56,  68, 109, 103,  77,
+    24,  35,  55,  64,  81, 104, 113,  92,
+    49,  64,  78,  87, 103, 121, 120, 101,
+    72,  92,  95,  98, 112, 100, 103,  99
+  };
+  static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = {
+    17,  18,  24,  47,  99,  99,  99,  99,
+    18,  21,  26,  66,  99,  99,  99,  99,
+    24,  26,  56,  99,  99,  99,  99,  99,
+    47,  66,  99,  99,  99,  99,  99,  99,
+    99,  99,  99,  99,  99,  99,  99,  99,
+    99,  99,  99,  99,  99,  99,  99,  99,
+    99,  99,  99,  99,  99,  99,  99,  99,
+    99,  99,  99,  99,  99,  99,  99,  99
+  };
+
+  /* Set up two quantization tables using the specified scaling */
+  jpeg_add_quant_table(cinfo, 0, (const unsigned int *)std_luminance_quant_tbl,
+		       scale_factor, force_baseline);
+  jpeg_add_quant_table(cinfo, 1, (const unsigned int *)std_chrominance_quant_tbl,
+		       scale_factor, force_baseline);
+}
+
+
+GLOBAL(int)
+jpeg_quality_scaling (int quality)
+/* Convert a user-specified quality rating to a percentage scaling factor
+ * for an underlying quantization table, using our recommended scaling curve.
+ * The input 'quality' factor should be 0 (terrible) to 100 (very good).
+ */
+{
+  /* Safety limit on quality factor.  Convert 0 to 1 to avoid zero divide. */
+  if (quality <= 0) quality = 1;
+  if (quality > 100) quality = 100;
+
+  /* The basic table is used as-is (scaling 100) for a quality of 50.
+   * Qualities 50..100 are converted to scaling percentage 200 - 2*Q;
+   * note that at Q=100 the scaling is 0, which will cause jpeg_add_quant_table
+   * to make all the table entries 1 (hence, minimum quantization loss).
+   * Qualities 1..50 are converted to scaling percentage 5000/Q.
+   */
+  if (quality < 50)
+    quality = 5000 / quality;
+  else
+    quality = 200 - quality*2;
+
+  return quality;
+}
+
+
+GLOBAL(void)
+jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline)
+/* Set or change the 'quality' (quantization) setting, using default tables.
+ * This is the standard quality-adjusting entry point for typical user
+ * interfaces; only those who want detailed control over quantization tables
+ * would use the preceding three routines directly.
+ */
+{
+  /* Convert user 0-100 rating to percentage scaling */
+  quality = jpeg_quality_scaling(quality);
+
+  /* Set up standard quality tables */
+  jpeg_set_linear_quality(cinfo, quality, force_baseline);
+}
+
+
+/*
+ * Huffman table setup routines
+ */
+
+LOCAL(void)
+add_huff_table (j_compress_ptr cinfo,
+		JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val)
+/* Define a Huffman table */
+{
+  int nsymbols, len;
+
+  if (*htblptr == NULL)
+    *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
+
+  /* Copy the number-of-symbols-of-each-code-length counts */
+  MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits));
+
+  /* Validate the counts.  We do this here mainly so we can copy the right
+   * number of symbols from the val[] array, without risking marching off
+   * the end of memory.  jchuff.c will do a more thorough test later.
+   */
+  nsymbols = 0;
+  for (len = 1; len <= 16; len++)
+    nsymbols += bits[len];
+  if (nsymbols < 1 || nsymbols > 256)
+    ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+
+  MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8));
+
+  /* Initialize sent_table FALSE so table will be written to JPEG file. */
+  (*htblptr)->sent_table = FALSE;
+}
+
+
+LOCAL(void)
+std_huff_tables (j_compress_ptr cinfo)
+/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */
+/* IMPORTANT: these are only valid for 8-bit data precision! */
+{
+  static const UINT8 bits_dc_luminance[17] =
+    { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 };
+  static const UINT8 val_dc_luminance[] =
+    { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 };
+  
+  static const UINT8 bits_dc_chrominance[17] =
+    { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 };
+  static const UINT8 val_dc_chrominance[] =
+    { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 };
+  
+  static const UINT8 bits_ac_luminance[17] =
+    { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d };
+  static const UINT8 val_ac_luminance[] =
+    { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12,
+      0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07,
+      0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08,
+      0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0,
+      0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16,
+      0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28,
+      0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39,
+      0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49,
+      0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59,
+      0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69,
+      0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79,
+      0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89,
+      0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98,
+      0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7,
+      0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6,
+      0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5,
+      0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4,
+      0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2,
+      0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea,
+      0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
+      0xf9, 0xfa };
+  
+  static const UINT8 bits_ac_chrominance[17] =
+    { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 };
+  static const UINT8 val_ac_chrominance[] =
+    { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21,
+      0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71,
+      0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91,
+      0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0,
+      0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34,
+      0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26,
+      0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38,
+      0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48,
+      0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58,
+      0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68,
+      0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
+      0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
+      0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96,
+      0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5,
+      0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4,
+      0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3,
+      0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2,
+      0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda,
+      0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9,
+      0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
+      0xf9, 0xfa };
+  
+  add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0],
+		 bits_dc_luminance, val_dc_luminance);
+  add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0],
+		 bits_ac_luminance, val_ac_luminance);
+  add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1],
+		 bits_dc_chrominance, val_dc_chrominance);
+  add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1],
+		 bits_ac_chrominance, val_ac_chrominance);
+}
+
+
+/*
+ * Default parameter setup for compression.
+ *
+ * Applications that don't choose to use this routine must do their
+ * own setup of all these parameters.  Alternately, you can call this
+ * to establish defaults and then alter parameters selectively.  This
+ * is the recommended approach since, if we add any new parameters,
+ * your code will still work (they'll be set to reasonable defaults).
+ */
+
+GLOBAL(void)
+jpeg_set_defaults (j_compress_ptr cinfo)
+{
+  int i;
+
+  /* Safety check to ensure start_compress not called yet. */
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  /* Allocate comp_info array large enough for maximum component count.
+   * Array is made permanent in case application wants to compress
+   * multiple images at same param settings.
+   */
+  if (cinfo->comp_info == NULL)
+    cinfo->comp_info = (jpeg_component_info *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  MAX_COMPONENTS * SIZEOF(jpeg_component_info));
+
+  /* Initialize everything not dependent on the color space */
+
+  cinfo->data_precision = BITS_IN_JSAMPLE;
+  /* Set up two quantization tables using default quality of 75 */
+  jpeg_set_quality(cinfo, 75, TRUE);
+  /* Set up two Huffman tables */
+  std_huff_tables(cinfo);
+
+  /* Initialize default arithmetic coding conditioning */
+  for (i = 0; i < NUM_ARITH_TBLS; i++) {
+    cinfo->arith_dc_L[i] = 0;
+    cinfo->arith_dc_U[i] = 1;
+    cinfo->arith_ac_K[i] = 5;
+  }
+
+  /* Default is no multiple-scan output */
+  cinfo->scan_info = NULL;
+  cinfo->num_scans = 0;
+
+  /* Expect normal source image, not raw downsampled data */
+  cinfo->raw_data_in = FALSE;
+
+  /* Use Huffman coding, not arithmetic coding, by default */
+  cinfo->arith_code = FALSE;
+
+  /* By default, don't do extra passes to optimize entropy coding */
+  cinfo->optimize_coding = FALSE;
+  /* The standard Huffman tables are only valid for 8-bit data precision.
+   * If the precision is higher, force optimization on so that usable
+   * tables will be computed.  This test can be removed if default tables
+   * are supplied that are valid for the desired precision.
+   */
+  if (cinfo->data_precision > 8)
+    cinfo->optimize_coding = TRUE;
+
+  /* By default, use the simpler non-cosited sampling alignment */
+  cinfo->CCIR601_sampling = FALSE;
+
+  /* No input smoothing */
+  cinfo->smoothing_factor = 0;
+
+  /* DCT algorithm preference */
+  cinfo->dct_method = JDCT_DEFAULT;
+
+  /* No restart markers */
+  cinfo->restart_interval = 0;
+  cinfo->restart_in_rows = 0;
+
+  /* Fill in default JFIF marker parameters.  Note that whether the marker
+   * will actually be written is determined by jpeg_set_colorspace.
+   *
+   * By default, the library emits JFIF version code 1.01.
+   * An application that wants to emit JFIF 1.02 extension markers should set
+   * JFIF_minor_version to 2.  We could probably get away with just defaulting
+   * to 1.02, but there may still be some decoders in use that will complain
+   * about that; saying 1.01 should minimize compatibility problems.
+   */
+  cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */
+  cinfo->JFIF_minor_version = 1;
+  cinfo->density_unit = 0;	/* Pixel size is unknown by default */
+  cinfo->X_density = 1;		/* Pixel aspect ratio is square by default */
+  cinfo->Y_density = 1;
+
+  /* Choose JPEG colorspace based on input space, set defaults accordingly */
+
+  jpeg_default_colorspace(cinfo);
+}
+
+
+/*
+ * Select an appropriate JPEG colorspace for in_color_space.
+ */
+
+GLOBAL(void)
+jpeg_default_colorspace (j_compress_ptr cinfo)
+{
+  switch (cinfo->in_color_space) {
+  case JCS_GRAYSCALE:
+    jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
+    break;
+  case JCS_RGB:
+    jpeg_set_colorspace(cinfo, JCS_YCbCr);
+    break;
+  case JCS_YCbCr:
+    jpeg_set_colorspace(cinfo, JCS_YCbCr);
+    break;
+  case JCS_CMYK:
+    jpeg_set_colorspace(cinfo, JCS_CMYK); /* By default, no translation */
+    break;
+  case JCS_YCCK:
+    jpeg_set_colorspace(cinfo, JCS_YCCK);
+    break;
+  case JCS_UNKNOWN:
+    jpeg_set_colorspace(cinfo, JCS_UNKNOWN);
+    break;
+  default:
+    ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
+  }
+}
+
+
+/*
+ * Set the JPEG colorspace, and choose colorspace-dependent default values.
+ */
+
+GLOBAL(void)
+jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
+{
+  jpeg_component_info * compptr;
+  int ci;
+
+#define SET_COMP(index,id,hsamp,vsamp,quant,dctbl,actbl)  \
+  (compptr = &cinfo->comp_info[index], \
+   compptr->component_id = (id), \
+   compptr->h_samp_factor = (hsamp), \
+   compptr->v_samp_factor = (vsamp), \
+   compptr->quant_tbl_no = (quant), \
+   compptr->dc_tbl_no = (dctbl), \
+   compptr->ac_tbl_no = (actbl) )
+
+  /* Safety check to ensure start_compress not called yet. */
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  /* For all colorspaces, we use Q and Huff tables 0 for luminance components,
+   * tables 1 for chrominance components.
+   */
+
+  cinfo->jpeg_color_space = colorspace;
+
+  cinfo->write_JFIF_header = FALSE; /* No marker for non-JFIF colorspaces */
+  cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */
+
+  switch (colorspace) {
+  case JCS_GRAYSCALE:
+    cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
+    cinfo->num_components = 1;
+    /* JFIF specifies component ID 1 */
+    SET_COMP(0, 1, 1,1, 0, 0,0);
+    break;
+  case JCS_RGB:
+    cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */
+    cinfo->num_components = 3;
+    SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0);
+    SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0);
+    SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0);
+    break;
+  case JCS_YCbCr:
+    cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
+    cinfo->num_components = 3;
+    /* JFIF specifies component IDs 1,2,3 */
+    /* We default to 2x2 subsamples of chrominance */
+    SET_COMP(0, 1, 2,2, 0, 0,0);
+    SET_COMP(1, 2, 1,1, 1, 1,1);
+    SET_COMP(2, 3, 1,1, 1, 1,1);
+    break;
+  case JCS_CMYK:
+    cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */
+    cinfo->num_components = 4;
+    SET_COMP(0, 0x43 /* 'C' */, 1,1, 0, 0,0);
+    SET_COMP(1, 0x4D /* 'M' */, 1,1, 0, 0,0);
+    SET_COMP(2, 0x59 /* 'Y' */, 1,1, 0, 0,0);
+    SET_COMP(3, 0x4B /* 'K' */, 1,1, 0, 0,0);
+    break;
+  case JCS_YCCK:
+    cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */
+    cinfo->num_components = 4;
+    SET_COMP(0, 1, 2,2, 0, 0,0);
+    SET_COMP(1, 2, 1,1, 1, 1,1);
+    SET_COMP(2, 3, 1,1, 1, 1,1);
+    SET_COMP(3, 4, 2,2, 0, 0,0);
+    break;
+  case JCS_UNKNOWN:
+    cinfo->num_components = cinfo->input_components;
+    if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS)
+      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+	       MAX_COMPONENTS);
+    for (ci = 0; ci < cinfo->num_components; ci++) {
+      SET_COMP(ci, ci, 1,1, 0, 0,0);
+    }
+    break;
+  default:
+    ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+  }
+}
+
+
+#ifdef C_PROGRESSIVE_SUPPORTED
+
+LOCAL(jpeg_scan_info *)
+fill_a_scan (jpeg_scan_info * scanptr, int ci,
+	     int Ss, int Se, int Ah, int Al)
+/* Support routine: generate one scan for specified component */
+{
+  scanptr->comps_in_scan = 1;
+  scanptr->component_index[0] = ci;
+  scanptr->Ss = Ss;
+  scanptr->Se = Se;
+  scanptr->Ah = Ah;
+  scanptr->Al = Al;
+  scanptr++;
+  return scanptr;
+}
+
+LOCAL(jpeg_scan_info *)
+fill_scans (jpeg_scan_info * scanptr, int ncomps,
+	    int Ss, int Se, int Ah, int Al)
+/* Support routine: generate one scan for each component */
+{
+  int ci;
+
+  for (ci = 0; ci < ncomps; ci++) {
+    scanptr->comps_in_scan = 1;
+    scanptr->component_index[0] = ci;
+    scanptr->Ss = Ss;
+    scanptr->Se = Se;
+    scanptr->Ah = Ah;
+    scanptr->Al = Al;
+    scanptr++;
+  }
+  return scanptr;
+}
+
+LOCAL(jpeg_scan_info *)
+fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al)
+/* Support routine: generate interleaved DC scan if possible, else N scans */
+{
+  int ci;
+
+  if (ncomps <= MAX_COMPS_IN_SCAN) {
+    /* Single interleaved DC scan */
+    scanptr->comps_in_scan = ncomps;
+    for (ci = 0; ci < ncomps; ci++)
+      scanptr->component_index[ci] = ci;
+    scanptr->Ss = scanptr->Se = 0;
+    scanptr->Ah = Ah;
+    scanptr->Al = Al;
+    scanptr++;
+  } else {
+    /* Noninterleaved DC scan for each component */
+    scanptr = fill_scans(scanptr, ncomps, 0, 0, Ah, Al);
+  }
+  return scanptr;
+}
+
+
+/*
+ * Create a recommended progressive-JPEG script.
+ * cinfo->num_components and cinfo->jpeg_color_space must be correct.
+ */
+
+GLOBAL(void)
+jpeg_simple_progression (j_compress_ptr cinfo)
+{
+  int ncomps = cinfo->num_components;
+  int nscans;
+  jpeg_scan_info * scanptr;
+
+  /* Safety check to ensure start_compress not called yet. */
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  /* Figure space needed for script.  Calculation must match code below! */
+  if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) {
+    /* Custom script for YCbCr color images. */
+    nscans = 10;
+  } else {
+    /* All-purpose script for other color spaces. */
+    if (ncomps > MAX_COMPS_IN_SCAN)
+      nscans = 6 * ncomps;	/* 2 DC + 4 AC scans per component */
+    else
+      nscans = 2 + 4 * ncomps;	/* 2 DC scans; 4 AC scans per component */
+  }
+
+  /* Allocate space for script.
+   * We need to put it in the permanent pool in case the application performs
+   * multiple compressions without changing the settings.  To avoid a memory
+   * leak if jpeg_simple_progression is called repeatedly for the same JPEG
+   * object, we try to re-use previously allocated space, and we allocate
+   * enough space to handle YCbCr even if initially asked for grayscale.
+   */
+  if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) {
+    cinfo->script_space_size = MAX(nscans, 10);
+    cinfo->script_space = (jpeg_scan_info *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+			cinfo->script_space_size * SIZEOF(jpeg_scan_info));
+  }
+  scanptr = cinfo->script_space;
+  cinfo->scan_info = scanptr;
+  cinfo->num_scans = nscans;
+
+  if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) {
+    /* Custom script for YCbCr color images. */
+    /* Initial DC scan */
+    scanptr = fill_dc_scans(scanptr, ncomps, 0, 1);
+    /* Initial AC scan: get some luma data out in a hurry */
+    scanptr = fill_a_scan(scanptr, 0, 1, 5, 0, 2);
+    /* Chroma data is too small to be worth expending many scans on */
+    scanptr = fill_a_scan(scanptr, 2, 1, 63, 0, 1);
+    scanptr = fill_a_scan(scanptr, 1, 1, 63, 0, 1);
+    /* Complete spectral selection for luma AC */
+    scanptr = fill_a_scan(scanptr, 0, 6, 63, 0, 2);
+    /* Refine next bit of luma AC */
+    scanptr = fill_a_scan(scanptr, 0, 1, 63, 2, 1);
+    /* Finish DC successive approximation */
+    scanptr = fill_dc_scans(scanptr, ncomps, 1, 0);
+    /* Finish AC successive approximation */
+    scanptr = fill_a_scan(scanptr, 2, 1, 63, 1, 0);
+    scanptr = fill_a_scan(scanptr, 1, 1, 63, 1, 0);
+    /* Luma bottom bit comes last since it's usually largest scan */
+    scanptr = fill_a_scan(scanptr, 0, 1, 63, 1, 0);
+  } else {
+    /* All-purpose script for other color spaces. */
+    /* Successive approximation first pass */
+    scanptr = fill_dc_scans(scanptr, ncomps, 0, 1);
+    scanptr = fill_scans(scanptr, ncomps, 1, 5, 0, 2);
+    scanptr = fill_scans(scanptr, ncomps, 6, 63, 0, 2);
+    /* Successive approximation second pass */
+    scanptr = fill_scans(scanptr, ncomps, 1, 63, 2, 1);
+    /* Successive approximation final pass */
+    scanptr = fill_dc_scans(scanptr, ncomps, 1, 0);
+    scanptr = fill_scans(scanptr, ncomps, 1, 63, 1, 0);
+  }
+}
+
+#endif /* C_PROGRESSIVE_SUPPORTED */

mozilla/jpeg/jcphuff.c

@@ -0,0 +1,833 @@
+/*
+ * jcphuff.c
+ *
+ * Copyright (C) 1995-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains Huffman entropy encoding routines for progressive JPEG.
+ *
+ * We do not support output suspension in this module, since the library
+ * currently does not allow multiple-scan files to be written with output
+ * suspension.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jchuff.h"		/* Declarations shared with jchuff.c */
+
+#ifdef C_PROGRESSIVE_SUPPORTED
+
+/* Expanded entropy encoder object for progressive Huffman encoding. */
+
+typedef struct {
+  struct jpeg_entropy_encoder pub; /* public fields */
+
+  /* Mode flag: TRUE for optimization, FALSE for actual data output */
+  boolean gather_statistics;
+
+  /* Bit-level coding status.
+   * next_output_byte/free_in_buffer are local copies of cinfo->dest fields.
+   */
+  JOCTET * next_output_byte;	/* => next byte to write in buffer */
+  size_t free_in_buffer;	/* # of byte spaces remaining in buffer */
+  INT32 put_buffer;		/* current bit-accumulation buffer */
+  int put_bits;			/* # of bits now in it */
+  j_compress_ptr cinfo;		/* link to cinfo (needed for dump_buffer) */
+
+  /* Coding status for DC components */
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+
+  /* Coding status for AC components */
+  int ac_tbl_no;		/* the table number of the single component */
+  unsigned int EOBRUN;		/* run length of EOBs */
+  unsigned int BE;		/* # of buffered correction bits before MCU */
+  char * bit_buffer;		/* buffer for correction bits (1 per char) */
+  /* packing correction bits tightly would save some space but cost time... */
+
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+  int next_restart_num;		/* next restart number to write (0-7) */
+
+  /* Pointers to derived tables (these workspaces have image lifespan).
+   * Since any one scan codes only DC or only AC, we only need one set
+   * of tables, not one for DC and one for AC.
+   */
+  c_derived_tbl * derived_tbls[NUM_HUFF_TBLS];
+
+  /* Statistics tables for optimization; again, one set is enough */
+  long * count_ptrs[NUM_HUFF_TBLS];
+} phuff_entropy_encoder;
+
+typedef phuff_entropy_encoder * phuff_entropy_ptr;
+
+/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit
+ * buffer can hold.  Larger sizes may slightly improve compression, but
+ * 1000 is already well into the realm of overkill.
+ * The minimum safe size is 64 bits.
+ */
+
+#define MAX_CORR_BITS  1000	/* Max # of correction bits I can buffer */
+
+/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32.
+ * We assume that int right shift is unsigned if INT32 right shift is,
+ * which should be safe.
+ */
+
+#ifdef RIGHT_SHIFT_IS_UNSIGNED
+#define ISHIFT_TEMPS	int ishift_temp;
+#define IRIGHT_SHIFT(x,shft)  \
+	((ishift_temp = (x)) < 0 ? \
+	 (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \
+	 (ishift_temp >> (shft)))
+#else
+#define ISHIFT_TEMPS
+#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
+#endif
+
+/* Forward declarations */
+METHODDEF(boolean) encode_mcu_DC_first JPP((j_compress_ptr cinfo,
+					    JBLOCKROW *MCU_data));
+METHODDEF(boolean) encode_mcu_AC_first JPP((j_compress_ptr cinfo,
+					    JBLOCKROW *MCU_data));
+METHODDEF(boolean) encode_mcu_DC_refine JPP((j_compress_ptr cinfo,
+					     JBLOCKROW *MCU_data));
+METHODDEF(boolean) encode_mcu_AC_refine JPP((j_compress_ptr cinfo,
+					     JBLOCKROW *MCU_data));
+METHODDEF(void) finish_pass_phuff JPP((j_compress_ptr cinfo));
+METHODDEF(void) finish_pass_gather_phuff JPP((j_compress_ptr cinfo));
+
+
+/*
+ * Initialize for a Huffman-compressed scan using progressive JPEG.
+ */
+
+METHODDEF(void)
+start_pass_phuff (j_compress_ptr cinfo, boolean gather_statistics)
+{  
+  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
+  boolean is_DC_band;
+  int ci, tbl;
+  jpeg_component_info * compptr;
+
+  entropy->cinfo = cinfo;
+  entropy->gather_statistics = gather_statistics;
+
+  is_DC_band = (cinfo->Ss == 0);
+
+  /* We assume jcmaster.c already validated the scan parameters. */
+
+  /* Select execution routines */
+  if (cinfo->Ah == 0) {
+    if (is_DC_band)
+      entropy->pub.encode_mcu = encode_mcu_DC_first;
+    else
+      entropy->pub.encode_mcu = encode_mcu_AC_first;
+  } else {
+    if (is_DC_band)
+      entropy->pub.encode_mcu = encode_mcu_DC_refine;
+    else {
+      entropy->pub.encode_mcu = encode_mcu_AC_refine;
+      /* AC refinement needs a correction bit buffer */
+      if (entropy->bit_buffer == NULL)
+	entropy->bit_buffer = (char *)
+	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				      MAX_CORR_BITS * SIZEOF(char));
+    }
+  }
+  if (gather_statistics)
+    entropy->pub.finish_pass = finish_pass_gather_phuff;
+  else
+    entropy->pub.finish_pass = finish_pass_phuff;
+
+  /* Only DC coefficients may be interleaved, so cinfo->comps_in_scan = 1
+   * for AC coefficients.
+   */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* Initialize DC predictions to 0 */
+    entropy->last_dc_val[ci] = 0;
+    /* Get table index */
+    if (is_DC_band) {
+      if (cinfo->Ah != 0)	/* DC refinement needs no table */
+	continue;
+      tbl = compptr->dc_tbl_no;
+    } else {
+      entropy->ac_tbl_no = tbl = compptr->ac_tbl_no;
+    }
+    if (gather_statistics) {
+      /* Check for invalid table index */
+      /* (make_c_derived_tbl does this in the other path) */
+      if (tbl < 0 || tbl >= NUM_HUFF_TBLS)
+        ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl);
+      /* Allocate and zero the statistics tables */
+      /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
+      if (entropy->count_ptrs[tbl] == NULL)
+	entropy->count_ptrs[tbl] = (long *)
+	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				      257 * SIZEOF(long));
+      MEMZERO(entropy->count_ptrs[tbl], 257 * SIZEOF(long));
+    } else {
+      /* Compute derived values for Huffman table */
+      /* We may do this more than once for a table, but it's not expensive */
+      jpeg_make_c_derived_tbl(cinfo, is_DC_band, tbl,
+			      & entropy->derived_tbls[tbl]);
+    }
+  }
+
+  /* Initialize AC stuff */
+  entropy->EOBRUN = 0;
+  entropy->BE = 0;
+
+  /* Initialize bit buffer to empty */
+  entropy->put_buffer = 0;
+  entropy->put_bits = 0;
+
+  /* Initialize restart stuff */
+  entropy->restarts_to_go = cinfo->restart_interval;
+  entropy->next_restart_num = 0;
+}
+
+
+/* Outputting bytes to the file.
+ * NB: these must be called only when actually outputting,
+ * that is, entropy->gather_statistics == FALSE.
+ */
+
+/* Emit a byte */
+#define emit_byte(entropy,val)  \
+	{ *(entropy)->next_output_byte++ = (JOCTET) (val);  \
+	  if (--(entropy)->free_in_buffer == 0)  \
+	    dump_buffer(entropy); }
+
+
+LOCAL(void)
+dump_buffer (phuff_entropy_ptr entropy)
+/* Empty the output buffer; we do not support suspension in this module. */
+{
+  struct jpeg_destination_mgr * dest = entropy->cinfo->dest;
+
+  if (! (*dest->empty_output_buffer) (entropy->cinfo))
+    ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND);
+  /* After a successful buffer dump, must reset buffer pointers */
+  entropy->next_output_byte = dest->next_output_byte;
+  entropy->free_in_buffer = dest->free_in_buffer;
+}
+
+
+/* Outputting bits to the file */
+
+/* Only the right 24 bits of put_buffer are used; the valid bits are
+ * left-justified in this part.  At most 16 bits can be passed to emit_bits
+ * in one call, and we never retain more than 7 bits in put_buffer
+ * between calls, so 24 bits are sufficient.
+ */
+
+INLINE
+LOCAL(void)
+emit_bits (phuff_entropy_ptr entropy, unsigned int code, int size)
+/* Emit some bits, unless we are in gather mode */
+{
+  /* This routine is heavily used, so it's worth coding tightly. */
+  register INT32 put_buffer = (INT32) code;
+  register int put_bits = entropy->put_bits;
+
+  /* if size is 0, caller used an invalid Huffman table entry */
+  if (size == 0)
+    ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE);
+
+  if (entropy->gather_statistics)
+    return;			/* do nothing if we're only getting stats */
+
+  put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
+  
+  put_bits += size;		/* new number of bits in buffer */
+  
+  put_buffer <<= 24 - put_bits; /* align incoming bits */
+
+  put_buffer |= entropy->put_buffer; /* and merge with old buffer contents */
+
+  while (put_bits >= 8) {
+    int c = (int) ((put_buffer >> 16) & 0xFF);
+    
+    emit_byte(entropy, c);
+    if (c == 0xFF) {		/* need to stuff a zero byte? */
+      emit_byte(entropy, 0);
+    }
+    put_buffer <<= 8;
+    put_bits -= 8;
+  }
+
+  entropy->put_buffer = put_buffer; /* update variables */
+  entropy->put_bits = put_bits;
+}
+
+
+LOCAL(void)
+flush_bits (phuff_entropy_ptr entropy)
+{
+  emit_bits(entropy, 0x7F, 7); /* fill any partial byte with ones */
+  entropy->put_buffer = 0;     /* and reset bit-buffer to empty */
+  entropy->put_bits = 0;
+}
+
+
+/*
+ * Emit (or just count) a Huffman symbol.
+ */
+
+INLINE
+LOCAL(void)
+emit_symbol (phuff_entropy_ptr entropy, int tbl_no, int symbol)
+{
+  if (entropy->gather_statistics)
+    entropy->count_ptrs[tbl_no][symbol]++;
+  else {
+    c_derived_tbl * tbl = entropy->derived_tbls[tbl_no];
+    emit_bits(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]);
+  }
+}
+
+
+/*
+ * Emit bits from a correction bit buffer.
+ */
+
+LOCAL(void)
+emit_buffered_bits (phuff_entropy_ptr entropy, char * bufstart,
+		    unsigned int nbits)
+{
+  if (entropy->gather_statistics)
+    return;			/* no real work */
+
+  while (nbits > 0) {
+    emit_bits(entropy, (unsigned int) (*bufstart), 1);
+    bufstart++;
+    nbits--;
+  }
+}
+
+
+/*
+ * Emit any pending EOBRUN symbol.
+ */
+
+LOCAL(void)
+emit_eobrun (phuff_entropy_ptr entropy)
+{
+  register int temp, nbits;
+
+  if (entropy->EOBRUN > 0) {	/* if there is any pending EOBRUN */
+    temp = entropy->EOBRUN;
+    nbits = 0;
+    while ((temp >>= 1))
+      nbits++;
+    /* safety check: shouldn't happen given limited correction-bit buffer */
+    if (nbits > 14)
+      ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE);
+
+    emit_symbol(entropy, entropy->ac_tbl_no, nbits << 4);
+    if (nbits)
+      emit_bits(entropy, entropy->EOBRUN, nbits);
+
+    entropy->EOBRUN = 0;
+
+    /* Emit any buffered correction bits */
+    emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE);
+    entropy->BE = 0;
+  }
+}
+
+
+/*
+ * Emit a restart marker & resynchronize predictions.
+ */
+
+LOCAL(void)
+emit_restart (phuff_entropy_ptr entropy, int restart_num)
+{
+  int ci;
+
+  emit_eobrun(entropy);
+
+  if (! entropy->gather_statistics) {
+    flush_bits(entropy);
+    emit_byte(entropy, 0xFF);
+    emit_byte(entropy, JPEG_RST0 + restart_num);
+  }
+
+  if (entropy->cinfo->Ss == 0) {
+    /* Re-initialize DC predictions to 0 */
+    for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++)
+      entropy->last_dc_val[ci] = 0;
+  } else {
+    /* Re-initialize all AC-related fields to 0 */
+    entropy->EOBRUN = 0;
+    entropy->BE = 0;
+  }
+}
+
+
+/*
+ * MCU encoding for DC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
+  register int temp, temp2;
+  register int nbits;
+  int blkn, ci;
+  int Al = cinfo->Al;
+  JBLOCKROW block;
+  jpeg_component_info * compptr;
+  ISHIFT_TEMPS
+
+  entropy->next_output_byte = cinfo->dest->next_output_byte;
+  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval)
+    if (entropy->restarts_to_go == 0)
+      emit_restart(entropy, entropy->next_restart_num);
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+
+    /* Compute the DC value after the required point transform by Al.
+     * This is simply an arithmetic right shift.
+     */
+    temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al);
+
+    /* DC differences are figured on the point-transformed values. */
+    temp = temp2 - entropy->last_dc_val[ci];
+    entropy->last_dc_val[ci] = temp2;
+
+    /* Encode the DC coefficient difference per section G.1.2.1 */
+    temp2 = temp;
+    if (temp < 0) {
+      temp = -temp;		/* temp is abs value of input */
+      /* For a negative input, want temp2 = bitwise complement of abs(input) */
+      /* This code assumes we are on a two's complement machine */
+      temp2--;
+    }
+    
+    /* Find the number of bits needed for the magnitude of the coefficient */
+    nbits = 0;
+    while (temp) {
+      nbits++;
+      temp >>= 1;
+    }
+    /* Check for out-of-range coefficient values.
+     * Since we're encoding a difference, the range limit is twice as much.
+     */
+    if (nbits > MAX_COEF_BITS+1)
+      ERREXIT(cinfo, JERR_BAD_DCT_COEF);
+    
+    /* Count/emit the Huffman-coded symbol for the number of bits */
+    emit_symbol(entropy, compptr->dc_tbl_no, nbits);
+    
+    /* Emit that number of bits of the value, if positive, */
+    /* or the complement of its magnitude, if negative. */
+    if (nbits)			/* emit_bits rejects calls with size 0 */
+      emit_bits(entropy, (unsigned int) temp2, nbits);
+  }
+
+  cinfo->dest->next_output_byte = entropy->next_output_byte;
+  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
+
+  /* Update restart-interval state too */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for AC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
+  register int temp, temp2;
+  register int nbits;
+  register int r, k;
+  int Se = cinfo->Se;
+  int Al = cinfo->Al;
+  JBLOCKROW block;
+
+  entropy->next_output_byte = cinfo->dest->next_output_byte;
+  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval)
+    if (entropy->restarts_to_go == 0)
+      emit_restart(entropy, entropy->next_restart_num);
+
+  /* Encode the MCU data block */
+  block = MCU_data[0];
+
+  /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */
+  
+  r = 0;			/* r = run length of zeros */
+   
+  for (k = cinfo->Ss; k <= Se; k++) {
+    if ((temp = (*block)[jpeg_natural_order[k]]) == 0) {
+      r++;
+      continue;
+    }
+    /* We must apply the point transform by Al.  For AC coefficients this
+     * is an integer division with rounding towards 0.  To do this portably
+     * in C, we shift after obtaining the absolute value; so the code is
+     * interwoven with finding the abs value (temp) and output bits (temp2).
+     */
+    if (temp < 0) {
+      temp = -temp;		/* temp is abs value of input */
+      temp >>= Al;		/* apply the point transform */
+      /* For a negative coef, want temp2 = bitwise complement of abs(coef) */
+      temp2 = ~temp;
+    } else {
+      temp >>= Al;		/* apply the point transform */
+      temp2 = temp;
+    }
+    /* Watch out for case that nonzero coef is zero after point transform */
+    if (temp == 0) {
+      r++;
+      continue;
+    }
+
+    /* Emit any pending EOBRUN */
+    if (entropy->EOBRUN > 0)
+      emit_eobrun(entropy);
+    /* if run length > 15, must emit special run-length-16 codes (0xF0) */
+    while (r > 15) {
+      emit_symbol(entropy, entropy->ac_tbl_no, 0xF0);
+      r -= 16;
+    }
+
+    /* Find the number of bits needed for the magnitude of the coefficient */
+    nbits = 1;			/* there must be at least one 1 bit */
+    while ((temp >>= 1))
+      nbits++;
+    /* Check for out-of-range coefficient values */
+    if (nbits > MAX_COEF_BITS)
+      ERREXIT(cinfo, JERR_BAD_DCT_COEF);
+
+    /* Count/emit Huffman symbol for run length / number of bits */
+    emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits);
+
+    /* Emit that number of bits of the value, if positive, */
+    /* or the complement of its magnitude, if negative. */
+    emit_bits(entropy, (unsigned int) temp2, nbits);
+
+    r = 0;			/* reset zero run length */
+  }
+
+  if (r > 0) {			/* If there are trailing zeroes, */
+    entropy->EOBRUN++;		/* count an EOB */
+    if (entropy->EOBRUN == 0x7FFF)
+      emit_eobrun(entropy);	/* force it out to avoid overflow */
+  }
+
+  cinfo->dest->next_output_byte = entropy->next_output_byte;
+  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
+
+  /* Update restart-interval state too */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for DC successive approximation refinement scan.
+ * Note: we assume such scans can be multi-component, although the spec
+ * is not very clear on the point.
+ */
+
+METHODDEF(boolean)
+encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
+  register int temp;
+  int blkn;
+  int Al = cinfo->Al;
+  JBLOCKROW block;
+
+  entropy->next_output_byte = cinfo->dest->next_output_byte;
+  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval)
+    if (entropy->restarts_to_go == 0)
+      emit_restart(entropy, entropy->next_restart_num);
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+
+    /* We simply emit the Al'th bit of the DC coefficient value. */
+    temp = (*block)[0];
+    emit_bits(entropy, (unsigned int) (temp >> Al), 1);
+  }
+
+  cinfo->dest->next_output_byte = entropy->next_output_byte;
+  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
+
+  /* Update restart-interval state too */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for AC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
+  register int temp;
+  register int r, k;
+  int EOB;
+  char *BR_buffer;
+  unsigned int BR;
+  int Se = cinfo->Se;
+  int Al = cinfo->Al;
+  JBLOCKROW block;
+  int absvalues[DCTSIZE2];
+
+  entropy->next_output_byte = cinfo->dest->next_output_byte;
+  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval)
+    if (entropy->restarts_to_go == 0)
+      emit_restart(entropy, entropy->next_restart_num);
+
+  /* Encode the MCU data block */
+  block = MCU_data[0];
+
+  /* It is convenient to make a pre-pass to determine the transformed
+   * coefficients' absolute values and the EOB position.
+   */
+  EOB = 0;
+  for (k = cinfo->Ss; k <= Se; k++) {
+    temp = (*block)[jpeg_natural_order[k]];
+    /* We must apply the point transform by Al.  For AC coefficients this
+     * is an integer division with rounding towards 0.  To do this portably
+     * in C, we shift after obtaining the absolute value.
+     */
+    if (temp < 0)
+      temp = -temp;		/* temp is abs value of input */
+    temp >>= Al;		/* apply the point transform */
+    absvalues[k] = temp;	/* save abs value for main pass */
+    if (temp == 1)
+      EOB = k;			/* EOB = index of last newly-nonzero coef */
+  }
+
+  /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */
+  
+  r = 0;			/* r = run length of zeros */
+  BR = 0;			/* BR = count of buffered bits added now */
+  BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */
+
+  for (k = cinfo->Ss; k <= Se; k++) {
+    if ((temp = absvalues[k]) == 0) {
+      r++;
+      continue;
+    }
+
+    /* Emit any required ZRLs, but not if they can be folded into EOB */
+    while (r > 15 && k <= EOB) {
+      /* emit any pending EOBRUN and the BE correction bits */
+      emit_eobrun(entropy);
+      /* Emit ZRL */
+      emit_symbol(entropy, entropy->ac_tbl_no, 0xF0);
+      r -= 16;
+      /* Emit buffered correction bits that must be associated with ZRL */
+      emit_buffered_bits(entropy, BR_buffer, BR);
+      BR_buffer = entropy->bit_buffer; /* BE bits are gone now */
+      BR = 0;
+    }
+
+    /* If the coef was previously nonzero, it only needs a correction bit.
+     * NOTE: a straight translation of the spec's figure G.7 would suggest
+     * that we also need to test r > 15.  But if r > 15, we can only get here
+     * if k > EOB, which implies that this coefficient is not 1.
+     */
+    if (temp > 1) {
+      /* The correction bit is the next bit of the absolute value. */
+      BR_buffer[BR++] = (char) (temp & 1);
+      continue;
+    }
+
+    /* Emit any pending EOBRUN and the BE correction bits */
+    emit_eobrun(entropy);
+
+    /* Count/emit Huffman symbol for run length / number of bits */
+    emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1);
+
+    /* Emit output bit for newly-nonzero coef */
+    temp = ((*block)[jpeg_natural_order[k]] < 0) ? 0 : 1;
+    emit_bits(entropy, (unsigned int) temp, 1);
+
+    /* Emit buffered correction bits that must be associated with this code */
+    emit_buffered_bits(entropy, BR_buffer, BR);
+    BR_buffer = entropy->bit_buffer; /* BE bits are gone now */
+    BR = 0;
+    r = 0;			/* reset zero run length */
+  }
+
+  if (r > 0 || BR > 0) {	/* If there are trailing zeroes, */
+    entropy->EOBRUN++;		/* count an EOB */
+    entropy->BE += BR;		/* concat my correction bits to older ones */
+    /* We force out the EOB if we risk either:
+     * 1. overflow of the EOB counter;
+     * 2. overflow of the correction bit buffer during the next MCU.
+     */
+    if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1))
+      emit_eobrun(entropy);
+  }
+
+  cinfo->dest->next_output_byte = entropy->next_output_byte;
+  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
+
+  /* Update restart-interval state too */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Finish up at the end of a Huffman-compressed progressive scan.
+ */
+
+METHODDEF(void)
+finish_pass_phuff (j_compress_ptr cinfo)
+{   
+  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
+
+  entropy->next_output_byte = cinfo->dest->next_output_byte;
+  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
+
+  /* Flush out any buffered data */
+  emit_eobrun(entropy);
+  flush_bits(entropy);
+
+  cinfo->dest->next_output_byte = entropy->next_output_byte;
+  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
+}
+
+
+/*
+ * Finish up a statistics-gathering pass and create the new Huffman tables.
+ */
+
+METHODDEF(void)
+finish_pass_gather_phuff (j_compress_ptr cinfo)
+{
+  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
+  boolean is_DC_band;
+  int ci, tbl;
+  jpeg_component_info * compptr;
+  JHUFF_TBL **htblptr;
+  boolean did[NUM_HUFF_TBLS];
+
+  /* Flush out buffered data (all we care about is counting the EOB symbol) */
+  emit_eobrun(entropy);
+
+  is_DC_band = (cinfo->Ss == 0);
+
+  /* It's important not to apply jpeg_gen_optimal_table more than once
+   * per table, because it clobbers the input frequency counts!
+   */
+  MEMZERO(did, SIZEOF(did));
+
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    if (is_DC_band) {
+      if (cinfo->Ah != 0)	/* DC refinement needs no table */
+	continue;
+      tbl = compptr->dc_tbl_no;
+    } else {
+      tbl = compptr->ac_tbl_no;
+    }
+    if (! did[tbl]) {
+      if (is_DC_band)
+        htblptr = & cinfo->dc_huff_tbl_ptrs[tbl];
+      else
+        htblptr = & cinfo->ac_huff_tbl_ptrs[tbl];
+      if (*htblptr == NULL)
+        *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
+      jpeg_gen_optimal_table(cinfo, *htblptr, entropy->count_ptrs[tbl]);
+      did[tbl] = TRUE;
+    }
+  }
+}
+
+
+/*
+ * Module initialization routine for progressive Huffman entropy encoding.
+ */
+
+GLOBAL(void)
+jinit_phuff_encoder (j_compress_ptr cinfo)
+{
+  phuff_entropy_ptr entropy;
+  int i;
+
+  entropy = (phuff_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(phuff_entropy_encoder));
+  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
+  entropy->pub.start_pass = start_pass_phuff;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    entropy->derived_tbls[i] = NULL;
+    entropy->count_ptrs[i] = NULL;
+  }
+  entropy->bit_buffer = NULL;	/* needed only in AC refinement scan */
+}
+
+#endif /* C_PROGRESSIVE_SUPPORTED */

mozilla/jpeg/jcprepct.c

@@ -0,0 +1,354 @@
+/*
+ * jcprepct.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the compression preprocessing controller.
+ * This controller manages the color conversion, downsampling,
+ * and edge expansion steps.
+ *
+ * Most of the complexity here is associated with buffering input rows
+ * as required by the downsampler.  See the comments at the head of
+ * jcsample.c for the downsampler's needs.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* At present, jcsample.c can request context rows only for smoothing.
+ * In the future, we might also need context rows for CCIR601 sampling
+ * or other more-complex downsampling procedures.  The code to support
+ * context rows should be compiled only if needed.
+ */
+#ifdef INPUT_SMOOTHING_SUPPORTED
+#define CONTEXT_ROWS_SUPPORTED
+#endif
+
+
+/*
+ * For the simple (no-context-row) case, we just need to buffer one
+ * row group's worth of pixels for the downsampling step.  At the bottom of
+ * the image, we pad to a full row group by replicating the last pixel row.
+ * The downsampler's last output row is then replicated if needed to pad
+ * out to a full iMCU row.
+ *
+ * When providing context rows, we must buffer three row groups' worth of
+ * pixels.  Three row groups are physically allocated, but the row pointer
+ * arrays are made five row groups high, with the extra pointers above and
+ * below "wrapping around" to point to the last and first real row groups.
+ * This allows the downsampler to access the proper context rows.
+ * At the top and bottom of the image, we create dummy context rows by
+ * copying the first or last real pixel row.  This copying could be avoided
+ * by pointer hacking as is done in jdmainct.c, but it doesn't seem worth the
+ * trouble on the compression side.
+ */
+
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_c_prep_controller pub; /* public fields */
+
+  /* Downsampling input buffer.  This buffer holds color-converted data
+   * until we have enough to do a downsample step.
+   */
+  JSAMPARRAY color_buf[MAX_COMPONENTS];
+
+  JDIMENSION rows_to_go;	/* counts rows remaining in source image */
+  int next_buf_row;		/* index of next row to store in color_buf */
+
+#ifdef CONTEXT_ROWS_SUPPORTED	/* only needed for context case */
+  int this_row_group;		/* starting row index of group to process */
+  int next_buf_stop;		/* downsample when we reach this index */
+#endif
+} my_prep_controller;
+
+typedef my_prep_controller * my_prep_ptr;
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF(void)
+start_pass_prep (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
+
+  if (pass_mode != JBUF_PASS_THRU)
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+
+  /* Initialize total-height counter for detecting bottom of image */
+  prep->rows_to_go = cinfo->image_height;
+  /* Mark the conversion buffer empty */
+  prep->next_buf_row = 0;
+#ifdef CONTEXT_ROWS_SUPPORTED
+  /* Preset additional state variables for context mode.
+   * These aren't used in non-context mode, so we needn't test which mode.
+   */
+  prep->this_row_group = 0;
+  /* Set next_buf_stop to stop after two row groups have been read in. */
+  prep->next_buf_stop = 2 * cinfo->max_v_samp_factor;
+#endif
+}
+
+
+/*
+ * Expand an image vertically from height input_rows to height output_rows,
+ * by duplicating the bottom row.
+ */
+
+LOCAL(void)
+expand_bottom_edge (JSAMPARRAY image_data, JDIMENSION num_cols,
+		    int input_rows, int output_rows)
+{
+  register int row;
+
+  for (row = input_rows; row < output_rows; row++) {
+    jcopy_sample_rows(image_data, input_rows-1, image_data, row,
+		      1, num_cols);
+  }
+}
+
+
+/*
+ * Process some data in the simple no-context case.
+ *
+ * Preprocessor output data is counted in "row groups".  A row group
+ * is defined to be v_samp_factor sample rows of each component.
+ * Downsampling will produce this much data from each max_v_samp_factor
+ * input rows.
+ */
+
+METHODDEF(void)
+pre_process_data (j_compress_ptr cinfo,
+		  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+		  JDIMENSION in_rows_avail,
+		  JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr,
+		  JDIMENSION out_row_groups_avail)
+{
+  my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
+  int numrows, ci;
+  JDIMENSION inrows;
+  jpeg_component_info * compptr;
+
+  while (*in_row_ctr < in_rows_avail &&
+	 *out_row_group_ctr < out_row_groups_avail) {
+    /* Do color conversion to fill the conversion buffer. */
+    inrows = in_rows_avail - *in_row_ctr;
+    numrows = cinfo->max_v_samp_factor - prep->next_buf_row;
+    numrows = (int) MIN((JDIMENSION) numrows, inrows);
+    (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr,
+				       prep->color_buf,
+				       (JDIMENSION) prep->next_buf_row,
+				       numrows);
+    *in_row_ctr += numrows;
+    prep->next_buf_row += numrows;
+    prep->rows_to_go -= numrows;
+    /* If at bottom of image, pad to fill the conversion buffer. */
+    if (prep->rows_to_go == 0 &&
+	prep->next_buf_row < cinfo->max_v_samp_factor) {
+      for (ci = 0; ci < cinfo->num_components; ci++) {
+	expand_bottom_edge(prep->color_buf[ci], cinfo->image_width,
+			   prep->next_buf_row, cinfo->max_v_samp_factor);
+      }
+      prep->next_buf_row = cinfo->max_v_samp_factor;
+    }
+    /* If we've filled the conversion buffer, empty it. */
+    if (prep->next_buf_row == cinfo->max_v_samp_factor) {
+      (*cinfo->downsample->downsample) (cinfo,
+					prep->color_buf, (JDIMENSION) 0,
+					output_buf, *out_row_group_ctr);
+      prep->next_buf_row = 0;
+      (*out_row_group_ctr)++;
+    }
+    /* If at bottom of image, pad the output to a full iMCU height.
+     * Note we assume the caller is providing a one-iMCU-height output buffer!
+     */
+    if (prep->rows_to_go == 0 &&
+	*out_row_group_ctr < out_row_groups_avail) {
+      for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	   ci++, compptr++) {
+	expand_bottom_edge(output_buf[ci],
+			   compptr->width_in_blocks * DCTSIZE,
+			   (int) (*out_row_group_ctr * compptr->v_samp_factor),
+			   (int) (out_row_groups_avail * compptr->v_samp_factor));
+      }
+      *out_row_group_ctr = out_row_groups_avail;
+      break;			/* can exit outer loop without test */
+    }
+  }
+}
+
+
+#ifdef CONTEXT_ROWS_SUPPORTED
+
+/*
+ * Process some data in the context case.
+ */
+
+METHODDEF(void)
+pre_process_context (j_compress_ptr cinfo,
+		     JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+		     JDIMENSION in_rows_avail,
+		     JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr,
+		     JDIMENSION out_row_groups_avail)
+{
+  my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
+  int numrows, ci;
+  int buf_height = cinfo->max_v_samp_factor * 3;
+  JDIMENSION inrows;
+
+  while (*out_row_group_ctr < out_row_groups_avail) {
+    if (*in_row_ctr < in_rows_avail) {
+      /* Do color conversion to fill the conversion buffer. */
+      inrows = in_rows_avail - *in_row_ctr;
+      numrows = prep->next_buf_stop - prep->next_buf_row;
+      numrows = (int) MIN((JDIMENSION) numrows, inrows);
+      (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr,
+					 prep->color_buf,
+					 (JDIMENSION) prep->next_buf_row,
+					 numrows);
+      /* Pad at top of image, if first time through */
+      if (prep->rows_to_go == cinfo->image_height) {
+	for (ci = 0; ci < cinfo->num_components; ci++) {
+	  int row;
+	  for (row = 1; row <= cinfo->max_v_samp_factor; row++) {
+	    jcopy_sample_rows(prep->color_buf[ci], 0,
+			      prep->color_buf[ci], -row,
+			      1, cinfo->image_width);
+	  }
+	}
+      }
+      *in_row_ctr += numrows;
+      prep->next_buf_row += numrows;
+      prep->rows_to_go -= numrows;
+    } else {
+      /* Return for more data, unless we are at the bottom of the image. */
+      if (prep->rows_to_go != 0)
+	break;
+      /* When at bottom of image, pad to fill the conversion buffer. */
+      if (prep->next_buf_row < prep->next_buf_stop) {
+	for (ci = 0; ci < cinfo->num_components; ci++) {
+	  expand_bottom_edge(prep->color_buf[ci], cinfo->image_width,
+			     prep->next_buf_row, prep->next_buf_stop);
+	}
+	prep->next_buf_row = prep->next_buf_stop;
+      }
+    }
+    /* If we've gotten enough data, downsample a row group. */
+    if (prep->next_buf_row == prep->next_buf_stop) {
+      (*cinfo->downsample->downsample) (cinfo,
+					prep->color_buf,
+					(JDIMENSION) prep->this_row_group,
+					output_buf, *out_row_group_ctr);
+      (*out_row_group_ctr)++;
+      /* Advance pointers with wraparound as necessary. */
+      prep->this_row_group += cinfo->max_v_samp_factor;
+      if (prep->this_row_group >= buf_height)
+	prep->this_row_group = 0;
+      if (prep->next_buf_row >= buf_height)
+	prep->next_buf_row = 0;
+      prep->next_buf_stop = prep->next_buf_row + cinfo->max_v_samp_factor;
+    }
+  }
+}
+
+
+/*
+ * Create the wrapped-around downsampling input buffer needed for context mode.
+ */
+
+LOCAL(void)
+create_context_buffer (j_compress_ptr cinfo)
+{
+  my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
+  int rgroup_height = cinfo->max_v_samp_factor;
+  int ci, i;
+  jpeg_component_info * compptr;
+  JSAMPARRAY true_buffer, fake_buffer;
+
+  /* Grab enough space for fake row pointers for all the components;
+   * we need five row groups' worth of pointers for each component.
+   */
+  fake_buffer = (JSAMPARRAY)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(cinfo->num_components * 5 * rgroup_height) *
+				SIZEOF(JSAMPROW));
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Allocate the actual buffer space (3 row groups) for this component.
+     * We make the buffer wide enough to allow the downsampler to edge-expand
+     * horizontally within the buffer, if it so chooses.
+     */
+    true_buffer = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE *
+		      cinfo->max_h_samp_factor) / compptr->h_samp_factor),
+       (JDIMENSION) (3 * rgroup_height));
+    /* Copy true buffer row pointers into the middle of the fake row array */
+    MEMCOPY(fake_buffer + rgroup_height, true_buffer,
+	    3 * rgroup_height * SIZEOF(JSAMPROW));
+    /* Fill in the above and below wraparound pointers */
+    for (i = 0; i < rgroup_height; i++) {
+      fake_buffer[i] = true_buffer[2 * rgroup_height + i];
+      fake_buffer[4 * rgroup_height + i] = true_buffer[i];
+    }
+    prep->color_buf[ci] = fake_buffer + rgroup_height;
+    fake_buffer += 5 * rgroup_height; /* point to space for next component */
+  }
+}
+
+#endif /* CONTEXT_ROWS_SUPPORTED */
+
+
+/*
+ * Initialize preprocessing controller.
+ */
+
+GLOBAL(void)
+jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer)
+{
+  my_prep_ptr prep;
+  int ci;
+  jpeg_component_info * compptr;
+
+  if (need_full_buffer)		/* safety check */
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+
+  prep = (my_prep_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_prep_controller));
+  cinfo->prep = (struct jpeg_c_prep_controller *) prep;
+  prep->pub.start_pass = start_pass_prep;
+
+  /* Allocate the color conversion buffer.
+   * We make the buffer wide enough to allow the downsampler to edge-expand
+   * horizontally within the buffer, if it so chooses.
+   */
+  if (cinfo->downsample->need_context_rows) {
+    /* Set up to provide context rows */
+#ifdef CONTEXT_ROWS_SUPPORTED
+    prep->pub.pre_process_data = pre_process_context;
+    create_context_buffer(cinfo);
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+  } else {
+    /* No context, just make it tall enough for one row group */
+    prep->pub.pre_process_data = pre_process_data;
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      prep->color_buf[ci] = (*cinfo->mem->alloc_sarray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE,
+	 (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE *
+			cinfo->max_h_samp_factor) / compptr->h_samp_factor),
+	 (JDIMENSION) cinfo->max_v_samp_factor);
+    }
+  }
+}

mozilla/jpeg/jcsample.c

@@ -0,0 +1,519 @@
+/*
+ * jcsample.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains downsampling routines.
+ *
+ * Downsampling input data is counted in "row groups".  A row group
+ * is defined to be max_v_samp_factor pixel rows of each component,
+ * from which the downsampler produces v_samp_factor sample rows.
+ * A single row group is processed in each call to the downsampler module.
+ *
+ * The downsampler is responsible for edge-expansion of its output data
+ * to fill an integral number of DCT blocks horizontally.  The source buffer
+ * may be modified if it is helpful for this purpose (the source buffer is
+ * allocated wide enough to correspond to the desired output width).
+ * The caller (the prep controller) is responsible for vertical padding.
+ *
+ * The downsampler may request "context rows" by setting need_context_rows
+ * during startup.  In this case, the input arrays will contain at least
+ * one row group's worth of pixels above and below the passed-in data;
+ * the caller will create dummy rows at image top and bottom by replicating
+ * the first or last real pixel row.
+ *
+ * An excellent reference for image resampling is
+ *   Digital Image Warping, George Wolberg, 1990.
+ *   Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7.
+ *
+ * The downsampling algorithm used here is a simple average of the source
+ * pixels covered by the output pixel.  The hi-falutin sampling literature
+ * refers to this as a "box filter".  In general the characteristics of a box
+ * filter are not very good, but for the specific cases we normally use (1:1
+ * and 2:1 ratios) the box is equivalent to a "triangle filter" which is not
+ * nearly so bad.  If you intend to use other sampling ratios, you'd be well
+ * advised to improve this code.
+ *
+ * A simple input-smoothing capability is provided.  This is mainly intended
+ * for cleaning up color-dithered GIF input files (if you find it inadequate,
+ * we suggest using an external filtering program such as pnmconvol).  When
+ * enabled, each input pixel P is replaced by a weighted sum of itself and its
+ * eight neighbors.  P's weight is 1-8*SF and each neighbor's weight is SF,
+ * where SF = (smoothing_factor / 1024).
+ * Currently, smoothing is only supported for 2h2v sampling factors.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Pointer to routine to downsample a single component */
+typedef JMETHOD(void, downsample1_ptr,
+		(j_compress_ptr cinfo, jpeg_component_info * compptr,
+		 JSAMPARRAY input_data, JSAMPARRAY output_data));
+
+/* Private subobject */
+
+typedef struct {
+  struct jpeg_downsampler pub;	/* public fields */
+
+  /* Downsampling method pointers, one per component */
+  downsample1_ptr methods[MAX_COMPONENTS];
+} my_downsampler;
+
+typedef my_downsampler * my_downsample_ptr;
+
+
+/*
+ * Initialize for a downsampling pass.
+ */
+
+METHODDEF(void)
+start_pass_downsample (j_compress_ptr cinfo)
+{
+  /* no work for now */
+}
+
+
+/*
+ * Expand a component horizontally from width input_cols to width output_cols,
+ * by duplicating the rightmost samples.
+ */
+
+LOCAL(void)
+expand_right_edge (JSAMPARRAY image_data, int num_rows,
+		   JDIMENSION input_cols, JDIMENSION output_cols)
+{
+  register JSAMPROW ptr;
+  register JSAMPLE pixval;
+  register int count;
+  int row;
+  int numcols = (int) (output_cols - input_cols);
+
+  if (numcols > 0) {
+    for (row = 0; row < num_rows; row++) {
+      ptr = image_data[row] + input_cols;
+      pixval = ptr[-1];		/* don't need GETJSAMPLE() here */
+      for (count = numcols; count > 0; count--)
+	*ptr++ = pixval;
+    }
+  }
+}
+
+
+/*
+ * Do downsampling for a whole row group (all components).
+ *
+ * In this version we simply downsample each component independently.
+ */
+
+METHODDEF(void)
+sep_downsample (j_compress_ptr cinfo,
+		JSAMPIMAGE input_buf, JDIMENSION in_row_index,
+		JSAMPIMAGE output_buf, JDIMENSION out_row_group_index)
+{
+  my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample;
+  int ci;
+  jpeg_component_info * compptr;
+  JSAMPARRAY in_ptr, out_ptr;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    in_ptr = input_buf[ci] + in_row_index;
+    out_ptr = output_buf[ci] + (out_row_group_index * compptr->v_samp_factor);
+    (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr);
+  }
+}
+
+
+/*
+ * Downsample pixel values of a single component.
+ * One row group is processed per call.
+ * This version handles arbitrary integral sampling ratios, without smoothing.
+ * Note that this version is not actually used for customary sampling ratios.
+ */
+
+METHODDEF(void)
+int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
+		JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+  int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v;
+  JDIMENSION outcol, outcol_h;	/* outcol_h == outcol*h_expand */
+  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  JSAMPROW inptr, outptr;
+  INT32 outvalue;
+
+  h_expand = cinfo->max_h_samp_factor / compptr->h_samp_factor;
+  v_expand = cinfo->max_v_samp_factor / compptr->v_samp_factor;
+  numpix = h_expand * v_expand;
+  numpix2 = numpix/2;
+
+  /* Expand input data enough to let all the output samples be generated
+   * by the standard loop.  Special-casing padded output would be more
+   * efficient.
+   */
+  expand_right_edge(input_data, cinfo->max_v_samp_factor,
+		    cinfo->image_width, output_cols * h_expand);
+
+  inrow = 0;
+  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
+    outptr = output_data[outrow];
+    for (outcol = 0, outcol_h = 0; outcol < output_cols;
+	 outcol++, outcol_h += h_expand) {
+      outvalue = 0;
+      for (v = 0; v < v_expand; v++) {
+	inptr = input_data[inrow+v] + outcol_h;
+	for (h = 0; h < h_expand; h++) {
+	  outvalue += (INT32) GETJSAMPLE(*inptr++);
+	}
+      }
+      *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix);
+    }
+    inrow += v_expand;
+  }
+}
+
+
+/*
+ * Downsample pixel values of a single component.
+ * This version handles the special case of a full-size component,
+ * without smoothing.
+ */
+
+METHODDEF(void)
+fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
+		     JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+  /* Copy the data */
+  jcopy_sample_rows(input_data, 0, output_data, 0,
+		    cinfo->max_v_samp_factor, cinfo->image_width);
+  /* Edge-expand */
+  expand_right_edge(output_data, cinfo->max_v_samp_factor,
+		    cinfo->image_width, compptr->width_in_blocks * DCTSIZE);
+}
+
+
+/*
+ * Downsample pixel values of a single component.
+ * This version handles the common case of 2:1 horizontal and 1:1 vertical,
+ * without smoothing.
+ *
+ * A note about the "bias" calculations: when rounding fractional values to
+ * integer, we do not want to always round 0.5 up to the next integer.
+ * If we did that, we'd introduce a noticeable bias towards larger values.
+ * Instead, this code is arranged so that 0.5 will be rounded up or down at
+ * alternate pixel locations (a simple ordered dither pattern).
+ */
+
+METHODDEF(void)
+h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
+		 JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+  int outrow;
+  JDIMENSION outcol;
+  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  register JSAMPROW inptr, outptr;
+  register int bias;
+
+  /* Expand input data enough to let all the output samples be generated
+   * by the standard loop.  Special-casing padded output would be more
+   * efficient.
+   */
+  expand_right_edge(input_data, cinfo->max_v_samp_factor,
+		    cinfo->image_width, output_cols * 2);
+
+  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
+    outptr = output_data[outrow];
+    inptr = input_data[outrow];
+    bias = 0;			/* bias = 0,1,0,1,... for successive samples */
+    for (outcol = 0; outcol < output_cols; outcol++) {
+      *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1])
+			      + bias) >> 1);
+      bias ^= 1;		/* 0=>1, 1=>0 */
+      inptr += 2;
+    }
+  }
+}
+
+
+/*
+ * Downsample pixel values of a single component.
+ * This version handles the standard case of 2:1 horizontal and 2:1 vertical,
+ * without smoothing.
+ */
+
+METHODDEF(void)
+h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
+		 JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+  int inrow, outrow;
+  JDIMENSION outcol;
+  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  register JSAMPROW inptr0, inptr1, outptr;
+  register int bias;
+
+  /* Expand input data enough to let all the output samples be generated
+   * by the standard loop.  Special-casing padded output would be more
+   * efficient.
+   */
+  expand_right_edge(input_data, cinfo->max_v_samp_factor,
+		    cinfo->image_width, output_cols * 2);
+
+  inrow = 0;
+  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
+    outptr = output_data[outrow];
+    inptr0 = input_data[inrow];
+    inptr1 = input_data[inrow+1];
+    bias = 1;			/* bias = 1,2,1,2,... for successive samples */
+    for (outcol = 0; outcol < output_cols; outcol++) {
+      *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
+			      GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1])
+			      + bias) >> 2);
+      bias ^= 3;		/* 1=>2, 2=>1 */
+      inptr0 += 2; inptr1 += 2;
+    }
+    inrow += 2;
+  }
+}
+
+
+#ifdef INPUT_SMOOTHING_SUPPORTED
+
+/*
+ * Downsample pixel values of a single component.
+ * This version handles the standard case of 2:1 horizontal and 2:1 vertical,
+ * with smoothing.  One row of context is required.
+ */
+
+METHODDEF(void)
+h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
+			JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+  int inrow, outrow;
+  JDIMENSION colctr;
+  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr;
+  INT32 membersum, neighsum, memberscale, neighscale;
+
+  /* Expand input data enough to let all the output samples be generated
+   * by the standard loop.  Special-casing padded output would be more
+   * efficient.
+   */
+  expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2,
+		    cinfo->image_width, output_cols * 2);
+
+  /* We don't bother to form the individual "smoothed" input pixel values;
+   * we can directly compute the output which is the average of the four
+   * smoothed values.  Each of the four member pixels contributes a fraction
+   * (1-8*SF) to its own smoothed image and a fraction SF to each of the three
+   * other smoothed pixels, therefore a total fraction (1-5*SF)/4 to the final
+   * output.  The four corner-adjacent neighbor pixels contribute a fraction
+   * SF to just one smoothed pixel, or SF/4 to the final output; while the
+   * eight edge-adjacent neighbors contribute SF to each of two smoothed
+   * pixels, or SF/2 overall.  In order to use integer arithmetic, these
+   * factors are scaled by 2^16 = 65536.
+   * Also recall that SF = smoothing_factor / 1024.
+   */
+
+  memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */
+  neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */
+
+  inrow = 0;
+  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
+    outptr = output_data[outrow];
+    inptr0 = input_data[inrow];
+    inptr1 = input_data[inrow+1];
+    above_ptr = input_data[inrow-1];
+    below_ptr = input_data[inrow+2];
+
+    /* Special case for first column: pretend column -1 is same as column 0 */
+    membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
+		GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]);
+    neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) +
+	       GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) +
+	       GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[2]) +
+	       GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[2]);
+    neighsum += neighsum;
+    neighsum += GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[2]) +
+		GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[2]);
+    membersum = membersum * memberscale + neighsum * neighscale;
+    *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
+    inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2;
+
+    for (colctr = output_cols - 2; colctr > 0; colctr--) {
+      /* sum of pixels directly mapped to this output element */
+      membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
+		  GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]);
+      /* sum of edge-neighbor pixels */
+      neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) +
+		 GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) +
+		 GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[2]) +
+		 GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[2]);
+      /* The edge-neighbors count twice as much as corner-neighbors */
+      neighsum += neighsum;
+      /* Add in the corner-neighbors */
+      neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[2]) +
+		  GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[2]);
+      /* form final output scaled up by 2^16 */
+      membersum = membersum * memberscale + neighsum * neighscale;
+      /* round, descale and output it */
+      *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
+      inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2;
+    }
+
+    /* Special case for last column */
+    membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
+		GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]);
+    neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) +
+	       GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) +
+	       GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[1]) +
+	       GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[1]);
+    neighsum += neighsum;
+    neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[1]) +
+		GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[1]);
+    membersum = membersum * memberscale + neighsum * neighscale;
+    *outptr = (JSAMPLE) ((membersum + 32768) >> 16);
+
+    inrow += 2;
+  }
+}
+
+
+/*
+ * Downsample pixel values of a single component.
+ * This version handles the special case of a full-size component,
+ * with smoothing.  One row of context is required.
+ */
+
+METHODDEF(void)
+fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr,
+			    JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+  int outrow;
+  JDIMENSION colctr;
+  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  register JSAMPROW inptr, above_ptr, below_ptr, outptr;
+  INT32 membersum, neighsum, memberscale, neighscale;
+  int colsum, lastcolsum, nextcolsum;
+
+  /* Expand input data enough to let all the output samples be generated
+   * by the standard loop.  Special-casing padded output would be more
+   * efficient.
+   */
+  expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2,
+		    cinfo->image_width, output_cols);
+
+  /* Each of the eight neighbor pixels contributes a fraction SF to the
+   * smoothed pixel, while the main pixel contributes (1-8*SF).  In order
+   * to use integer arithmetic, these factors are multiplied by 2^16 = 65536.
+   * Also recall that SF = smoothing_factor / 1024.
+   */
+
+  memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */
+  neighscale = cinfo->smoothing_factor * 64; /* scaled SF */
+
+  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
+    outptr = output_data[outrow];
+    inptr = input_data[outrow];
+    above_ptr = input_data[outrow-1];
+    below_ptr = input_data[outrow+1];
+
+    /* Special case for first column */
+    colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) +
+	     GETJSAMPLE(*inptr);
+    membersum = GETJSAMPLE(*inptr++);
+    nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) +
+		 GETJSAMPLE(*inptr);
+    neighsum = colsum + (colsum - membersum) + nextcolsum;
+    membersum = membersum * memberscale + neighsum * neighscale;
+    *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
+    lastcolsum = colsum; colsum = nextcolsum;
+
+    for (colctr = output_cols - 2; colctr > 0; colctr--) {
+      membersum = GETJSAMPLE(*inptr++);
+      above_ptr++; below_ptr++;
+      nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) +
+		   GETJSAMPLE(*inptr);
+      neighsum = lastcolsum + (colsum - membersum) + nextcolsum;
+      membersum = membersum * memberscale + neighsum * neighscale;
+      *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
+      lastcolsum = colsum; colsum = nextcolsum;
+    }
+
+    /* Special case for last column */
+    membersum = GETJSAMPLE(*inptr);
+    neighsum = lastcolsum + (colsum - membersum) + colsum;
+    membersum = membersum * memberscale + neighsum * neighscale;
+    *outptr = (JSAMPLE) ((membersum + 32768) >> 16);
+
+  }
+}
+
+#endif /* INPUT_SMOOTHING_SUPPORTED */
+
+
+/*
+ * Module initialization routine for downsampling.
+ * Note that we must select a routine for each component.
+ */
+
+GLOBAL(void)
+jinit_downsampler (j_compress_ptr cinfo)
+{
+  my_downsample_ptr downsample;
+  int ci;
+  jpeg_component_info * compptr;
+  boolean smoothok = TRUE;
+
+  downsample = (my_downsample_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_downsampler));
+  cinfo->downsample = (struct jpeg_downsampler *) downsample;
+  downsample->pub.start_pass = start_pass_downsample;
+  downsample->pub.downsample = sep_downsample;
+  downsample->pub.need_context_rows = FALSE;
+
+  if (cinfo->CCIR601_sampling)
+    ERREXIT(cinfo, JERR_CCIR601_NOTIMPL);
+
+  /* Verify we can handle the sampling factors, and set up method pointers */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    if (compptr->h_samp_factor == cinfo->max_h_samp_factor &&
+	compptr->v_samp_factor == cinfo->max_v_samp_factor) {
+#ifdef INPUT_SMOOTHING_SUPPORTED
+      if (cinfo->smoothing_factor) {
+	downsample->methods[ci] = fullsize_smooth_downsample;
+	downsample->pub.need_context_rows = TRUE;
+      } else
+#endif
+	downsample->methods[ci] = fullsize_downsample;
+    } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
+	       compptr->v_samp_factor == cinfo->max_v_samp_factor) {
+      smoothok = FALSE;
+      downsample->methods[ci] = h2v1_downsample;
+    } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
+	       compptr->v_samp_factor * 2 == cinfo->max_v_samp_factor) {
+#ifdef INPUT_SMOOTHING_SUPPORTED
+      if (cinfo->smoothing_factor) {
+	downsample->methods[ci] = h2v2_smooth_downsample;
+	downsample->pub.need_context_rows = TRUE;
+      } else
+#endif
+	downsample->methods[ci] = h2v2_downsample;
+    } else if ((cinfo->max_h_samp_factor % compptr->h_samp_factor) == 0 &&
+	       (cinfo->max_v_samp_factor % compptr->v_samp_factor) == 0) {
+      smoothok = FALSE;
+      downsample->methods[ci] = int_downsample;
+    } else
+      ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL);
+  }
+
+#ifdef INPUT_SMOOTHING_SUPPORTED
+  if (cinfo->smoothing_factor && !smoothok)
+    TRACEMS(cinfo, 0, JTRC_SMOOTH_NOTIMPL);
+#endif
+}

mozilla/jpeg/jdapimin.c

@@ -0,0 +1,512 @@
+/*
+ * jdapimin.c
+ *
+ * Copyright (C) 1994-1998, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains application interface code for the decompression half
+ * of the JPEG library.  These are the "minimum" API routines that may be
+ * needed in either the normal full-decompression case or the
+ * transcoding-only case.
+ *
+ * Most of the routines intended to be called directly by an application
+ * are in this file or in jdapistd.c.  But also see jcomapi.c for routines
+ * shared by compression and decompression, and jdtrans.c for the transcoding
+ * case.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+#include "xp_core.h"
+
+#ifdef HAVE_MMX_INTEL_MNEMONICS
+int MMXAvailable;
+int mmxsupport();
+#endif
+
+/*
+ * Initialization of a JPEG decompression object.
+ * The error manager must already be set up (in case memory manager fails).
+ */
+
+GLOBAL(void)
+jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize)
+{
+  int i;
+
+#ifdef HAVE_MMX_INTEL_MNEMONICS
+  static int cpuidDetected = 0;
+
+  if(!cpuidDetected)
+  {
+	MMXAvailable = mmxsupport();
+	cpuidDetected = 1;
+  }
+#endif
+
+  /* For debugging purposes, zero the whole master structure.
+   * But error manager pointer is already there, so save and restore it.
+   */
+
+  /* Guard against version mismatches between library and caller. */
+  cinfo->mem = NULL;		/* so jpeg_destroy knows mem mgr not called */
+  if (version != JPEG_LIB_VERSION)
+    ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version);
+  if (structsize != SIZEOF(struct jpeg_decompress_struct))
+    ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, 
+	     (int) SIZEOF(struct jpeg_decompress_struct), (int) structsize);
+
+  /* For debugging purposes, we zero the whole master structure.
+   * But the application has already set the err pointer, and may have set
+   * client_data, so we have to save and restore those fields.
+   * Note: if application hasn't set client_data, tools like Purify may
+   * complain here.
+   */
+  {
+    struct jpeg_error_mgr * err = cinfo->err;
+    void * client_data = cinfo->client_data; /* ignore Purify complaint here */
+    MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct));
+    cinfo->err = err;
+    cinfo->client_data = client_data;
+  }
+  cinfo->is_decompressor = TRUE;
+
+  /* Initialize a memory manager instance for this object */
+  jinit_memory_mgr((j_common_ptr) cinfo);
+
+  /* Zero out pointers to permanent structures. */
+  cinfo->progress = NULL;
+  cinfo->src = NULL;
+
+  for (i = 0; i < NUM_QUANT_TBLS; i++)
+    cinfo->quant_tbl_ptrs[i] = NULL;
+
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    cinfo->dc_huff_tbl_ptrs[i] = NULL;
+    cinfo->ac_huff_tbl_ptrs[i] = NULL;
+  }
+
+  /* Initialize marker processor so application can override methods
+   * for COM, APPn markers before calling jpeg_read_header.
+   */
+  cinfo->marker_list = NULL;
+  jinit_marker_reader(cinfo);
+
+  /* And initialize the overall input controller. */
+  jinit_input_controller(cinfo);
+
+  /* OK, I'm ready */
+  cinfo->global_state = DSTATE_START;
+}
+
+
+/*
+ * Destruction of a JPEG decompression object
+ */
+
+GLOBAL(void)
+jpeg_destroy_decompress (j_decompress_ptr cinfo)
+{
+  jpeg_destroy((j_common_ptr) cinfo); /* use common routine */
+}
+
+
+/*
+ * Abort processing of a JPEG decompression operation,
+ * but don't destroy the object itself.
+ */
+
+GLOBAL(void)
+jpeg_abort_decompress (j_decompress_ptr cinfo)
+{
+  jpeg_abort((j_common_ptr) cinfo); /* use common routine */
+}
+
+/*
+ * Set default decompression parameters.
+ */
+
+LOCAL(void)
+default_decompress_parms (j_decompress_ptr cinfo)
+{
+  /* Guess the input colorspace, and set output colorspace accordingly. */
+  /* (Wish JPEG committee had provided a real way to specify this...) */
+  /* Note application may override our guesses. */
+  switch (cinfo->num_components) {
+  case 1:
+    cinfo->jpeg_color_space = JCS_GRAYSCALE;
+    cinfo->out_color_space = JCS_GRAYSCALE;
+    break;
+    
+  case 3:
+    if (cinfo->saw_JFIF_marker) {
+      cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */
+    } else if (cinfo->saw_Adobe_marker) {
+      switch (cinfo->Adobe_transform) {
+      case 0:
+	cinfo->jpeg_color_space = JCS_RGB;
+	break;
+      case 1:
+	cinfo->jpeg_color_space = JCS_YCbCr;
+	break;
+      default:
+	WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
+	cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
+	break;
+      }
+    } else {
+      /* Saw no special markers, try to guess from the component IDs */
+      int cid0 = cinfo->comp_info[0].component_id;
+      int cid1 = cinfo->comp_info[1].component_id;
+      int cid2 = cinfo->comp_info[2].component_id;
+
+      if (cid0 == 1 && cid1 == 2 && cid2 == 3)
+	cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */
+      else if (cid0 == 82 && cid1 == 71 && cid2 == 66)
+	cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */
+      else {
+	TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2);
+	cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
+      }
+    }
+    /* Always guess RGB is proper output colorspace. */
+    cinfo->out_color_space = JCS_RGB;
+    break;
+    
+  case 4:
+    if (cinfo->saw_Adobe_marker) {
+      switch (cinfo->Adobe_transform) {
+      case 0:
+	cinfo->jpeg_color_space = JCS_CMYK;
+	break;
+      case 2:
+	cinfo->jpeg_color_space = JCS_YCCK;
+	break;
+      default:
+	WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
+	cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */
+	break;
+      }
+    } else {
+      /* No special markers, assume straight CMYK. */
+      cinfo->jpeg_color_space = JCS_CMYK;
+    }
+    cinfo->out_color_space = JCS_CMYK;
+    break;
+    
+  default:
+    cinfo->jpeg_color_space = JCS_UNKNOWN;
+    cinfo->out_color_space = JCS_UNKNOWN;
+    break;
+  }
+
+  /* Set defaults for other decompression parameters. */
+  cinfo->scale_num = 1;		/* 1:1 scaling */
+  cinfo->scale_denom = 1;
+  cinfo->output_gamma = 1.0;
+  cinfo->buffered_image = FALSE;
+  cinfo->raw_data_out = FALSE;
+  cinfo->dct_method = JDCT_DEFAULT;
+  cinfo->do_fancy_upsampling = TRUE;
+  cinfo->do_block_smoothing = TRUE;
+  cinfo->quantize_colors = FALSE;
+  /* We set these in case application only sets quantize_colors. */
+  cinfo->dither_mode = JDITHER_FS;
+#ifdef QUANT_2PASS_SUPPORTED
+  cinfo->two_pass_quantize = TRUE;
+#else
+  cinfo->two_pass_quantize = FALSE;
+#endif
+  cinfo->desired_number_of_colors = 256;
+  cinfo->colormap = NULL;
+  /* Initialize for no mode change in buffered-image mode. */
+  cinfo->enable_1pass_quant = FALSE;
+  cinfo->enable_external_quant = FALSE;
+  cinfo->enable_2pass_quant = FALSE;
+}
+
+
+/*
+ * Decompression startup: read start of JPEG datastream to see what's there.
+ * Need only initialize JPEG object and supply a data source before calling.
+ *
+ * This routine will read as far as the first SOS marker (ie, actual start of
+ * compressed data), and will save all tables and parameters in the JPEG
+ * object.  It will also initialize the decompression parameters to default
+ * values, and finally return JPEG_HEADER_OK.  On return, the application may
+ * adjust the decompression parameters and then call jpeg_start_decompress.
+ * (Or, if the application only wanted to determine the image parameters,
+ * the data need not be decompressed.  In that case, call jpeg_abort or
+ * jpeg_destroy to release any temporary space.)
+ * If an abbreviated (tables only) datastream is presented, the routine will
+ * return JPEG_HEADER_TABLES_ONLY upon reaching EOI.  The application may then
+ * re-use the JPEG object to read the abbreviated image datastream(s).
+ * It is unnecessary (but OK) to call jpeg_abort in this case.
+ * The JPEG_SUSPENDED return code only occurs if the data source module
+ * requests suspension of the decompressor.  In this case the application
+ * should load more source data and then re-call jpeg_read_header to resume
+ * processing.
+ * If a non-suspending data source is used and require_image is TRUE, then the
+ * return code need not be inspected since only JPEG_HEADER_OK is possible.
+ *
+ * This routine is now just a front end to jpeg_consume_input, with some
+ * extra error checking.
+ */
+
+GLOBAL(int)
+jpeg_read_header (j_decompress_ptr cinfo, boolean require_image)
+{
+  int retcode;
+
+  if (cinfo->global_state != DSTATE_START &&
+      cinfo->global_state != DSTATE_INHEADER)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  retcode = jpeg_consume_input(cinfo);
+
+  switch (retcode) {
+  case JPEG_REACHED_SOS:
+    retcode = JPEG_HEADER_OK;
+    break;
+  case JPEG_REACHED_EOI:
+    if (require_image)		/* Complain if application wanted an image */
+      ERREXIT(cinfo, JERR_NO_IMAGE);
+    /* Reset to start state; it would be safer to require the application to
+     * call jpeg_abort, but we can't change it now for compatibility reasons.
+     * A side effect is to free any temporary memory (there shouldn't be any).
+     */
+    jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */
+    retcode = JPEG_HEADER_TABLES_ONLY;
+    break;
+  case JPEG_SUSPENDED:
+    /* no work */
+    break;
+  }
+
+  return retcode;
+}
+
+
+/*
+ * Consume data in advance of what the decompressor requires.
+ * This can be called at any time once the decompressor object has
+ * been created and a data source has been set up.
+ *
+ * This routine is essentially a state machine that handles a couple
+ * of critical state-transition actions, namely initial setup and
+ * transition from header scanning to ready-for-start_decompress.
+ * All the actual input is done via the input controller's consume_input
+ * method.
+ */
+
+GLOBAL(int)
+jpeg_consume_input (j_decompress_ptr cinfo)
+{
+  int retcode = JPEG_SUSPENDED;
+
+  /* NB: every possible DSTATE value should be listed in this switch */
+  switch (cinfo->global_state) {
+  case DSTATE_START:
+    /* Start-of-datastream actions: reset appropriate modules */
+    (*cinfo->inputctl->reset_input_controller) (cinfo);
+    /* Initialize application's data source module */
+    (*cinfo->src->init_source) (cinfo);
+    cinfo->global_state = DSTATE_INHEADER;
+    /*FALLTHROUGH*/
+  case DSTATE_INHEADER:
+    retcode = (*cinfo->inputctl->consume_input) (cinfo);
+    if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */
+      /* Set up default parameters based on header data */
+      default_decompress_parms(cinfo);
+      /* Set global state: ready for start_decompress */
+      cinfo->global_state = DSTATE_READY;
+    }
+    break;
+  case DSTATE_READY:
+    /* Can't advance past first SOS until start_decompress is called */
+    retcode = JPEG_REACHED_SOS;
+    break;
+  case DSTATE_PRELOAD:
+  case DSTATE_PRESCAN:
+  case DSTATE_SCANNING:
+  case DSTATE_RAW_OK:
+  case DSTATE_BUFIMAGE:
+  case DSTATE_BUFPOST:
+  case DSTATE_STOPPING:
+    retcode = (*cinfo->inputctl->consume_input) (cinfo);
+    break;
+  default:
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  }
+  return retcode;
+}
+
+
+/*
+ * Have we finished reading the input file?
+ */
+
+GLOBAL(boolean)
+jpeg_input_complete (j_decompress_ptr cinfo)
+{
+  /* Check for valid jpeg object */
+  if (cinfo->global_state < DSTATE_START ||
+      cinfo->global_state > DSTATE_STOPPING)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  return cinfo->inputctl->eoi_reached;
+}
+
+
+/*
+ * Is there more than one scan?
+ */
+
+GLOBAL(boolean)
+jpeg_has_multiple_scans (j_decompress_ptr cinfo)
+{
+  /* Only valid after jpeg_read_header completes */
+  if (cinfo->global_state < DSTATE_READY ||
+      cinfo->global_state > DSTATE_STOPPING)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  return cinfo->inputctl->has_multiple_scans;
+}
+
+
+/*
+ * Finish JPEG decompression.
+ *
+ * This will normally just verify the file trailer and release temp storage.
+ *
+ * Returns FALSE if suspended.  The return value need be inspected only if
+ * a suspending data source is used.
+ */
+
+GLOBAL(boolean)
+jpeg_finish_decompress (j_decompress_ptr cinfo)
+{
+  if ((cinfo->global_state == DSTATE_SCANNING ||
+       cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) {
+    /* Terminate final pass of non-buffered mode */
+    if (cinfo->output_scanline < cinfo->output_height)
+      ERREXIT(cinfo, JERR_TOO_LITTLE_DATA);
+    (*cinfo->master->finish_output_pass) (cinfo);
+    cinfo->global_state = DSTATE_STOPPING;
+  } else if (cinfo->global_state == DSTATE_BUFIMAGE) {
+    /* Finishing after a buffered-image operation */
+    cinfo->global_state = DSTATE_STOPPING;
+  } else if (cinfo->global_state != DSTATE_STOPPING) {
+    /* STOPPING = repeat call after a suspension, anything else is error */
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  }
+  /* Read until EOI */
+  while (! cinfo->inputctl->eoi_reached) {
+    if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED)
+      return FALSE;		/* Suspend, come back later */
+  }
+  /* Do final cleanup */
+  (*cinfo->src->term_source) (cinfo);
+  /* We can use jpeg_abort to release memory and reset global_state */
+  jpeg_abort((j_common_ptr) cinfo);
+  return TRUE;
+}
+
+
+#ifdef HAVE_MMX_INTEL_MNEMONICS
+
+static int mmx_supported = 0;
+
+int mmxsupport()
+{
+
+#ifdef XP_UNIX
+    __asm__ __volatile__(
+       "pushf\n\t"
+       "pop %eax\n\n"
+       "mov %eax, %ecx\n\n"
+       "xor %eax, 0x200000\n\t"		//Toggle ID bit in Eflag [i.e. bit(21)] 
+       "push %eax\n\t"				//Save modified Eflag back to stack
+
+       "popf\n\t"					//Restored modified value back to Eflag reg 
+       "pushf\n\t"				//Save Eflag to stack
+       "pop %eax\n\t"				//Get Eflag from stack
+       "xor %ecx, %eax\n\t"		//Compare the new Eflag with the original Eflag
+       "jz NOT_SUPPORTED\n\t"		//If the same, CPUID instruction is not supported,
+								//skip following instructions and jump to
+								//NOT_SUPPORTED label
+
+       "xor %eax, %eax\n\t"			//Set eax to zero
+       "cpuid\n\t"
+       "cmp %eax, 1\n\t"				//make sure eax return non-zero value
+       "jl NOT_SUPPORTED\n\t"		//If eax is zero, mmx not supported
+
+       "xor %eax, %eax\n\t"			//set eax to zero
+       "inc %eax\n\t"					//Now increment eax to 1.  This instruction is 
+								//faster than the instruction "mov eax, 1"
+		
+       "cpuid\n\t"
+       "and $0x00800000, %edx\n\t"		//mask out all bits but mmx bit(24)
+       "cmp %edx, 0\n\t"				// 0 = mmx not supported
+       "jz	NOT_SUPPORTED\n\t"		// non-zero = Yes, mmx IS supported
+
+       "mov	1,$_mmx_supported\n\t"	//set return value to 1
+
+"NOT_SUPPORTED:\n\t"
+       "mov	%eax, $_mmx_supported\n\t"	//move return value to eax	
+);
+#endif
+
+#ifdef XP_WIN
+	_asm {
+		pushfd					//Save Eflag to stack
+		pop eax					//Get Eflag from stack into eax
+		mov ecx, eax			//Make another copy of Eflag in ecx
+		xor eax, 0x200000		//Toggle ID bit in Eflag [i.e. bit(21)] 
+		push eax				//Save modified Eflag back to stack
+
+		popfd					//Restored modified value back to Eflag reg 
+		pushfd					//Save Eflag to stack
+		pop eax					//Get Eflag from stack
+		xor eax, ecx			//Compare the new Eflag with the original Eflag
+		jz NOT_SUPPORTED		//If the same, CPUID instruction is not supported,
+								//skip following instructions and jump to
+								//NOT_SUPPORTED label
+
+		xor eax, eax			//Set eax to zero
+					
+		_asm _emit 0x0f			//CPUID instruction  (two bytes opcode)
+		_asm _emit 0xa2 
+		
+		cmp eax, 1				//make sure eax return non-zero value
+		jl NOT_SUPPORTED		//If eax is zero, mmx not supported
+
+		xor eax, eax			//set eax to zero
+		inc eax					//Now increment eax to 1.  This instruction is 
+								//faster than the instruction "mov eax, 1"
+		
+		_asm _emit 0x0f			//CPUID instruction
+		_asm _emit 0xa2 
+
+		and edx, 0x00800000		//mask out all bits but mmx bit(24)
+		cmp edx, 0				// 0 = mmx not supported
+		jz	NOT_SUPPORTED		// non-zero = Yes, mmx IS supported
+
+		mov	mmx_supported, 1	//set return value to 1
+
+NOT_SUPPORTED:
+		mov	eax, mmx_supported	//move return value to eax	
+
+	}
+#endif
+    
+	return mmx_supported;		
+}
+
+
+
+
+
+#endif
+

mozilla/jpeg/jdapistd.c

@@ -0,0 +1,275 @@
+/*
+ * jdapistd.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains application interface code for the decompression half
+ * of the JPEG library.  These are the "standard" API routines that are
+ * used in the normal full-decompression case.  They are not used by a
+ * transcoding-only application.  Note that if an application links in
+ * jpeg_start_decompress, it will end up linking in the entire decompressor.
+ * We thus must separate this file from jdapimin.c to avoid linking the
+ * whole decompression library into a transcoder.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Forward declarations */
+LOCAL(boolean) output_pass_setup JPP((j_decompress_ptr cinfo));
+
+
+/*
+ * Decompression initialization.
+ * jpeg_read_header must be completed before calling this.
+ *
+ * If a multipass operating mode was selected, this will do all but the
+ * last pass, and thus may take a great deal of time.
+ *
+ * Returns FALSE if suspended.  The return value need be inspected only if
+ * a suspending data source is used.
+ */
+
+GLOBAL(boolean)
+jpeg_start_decompress (j_decompress_ptr cinfo)
+{
+  if (cinfo->global_state == DSTATE_READY) {
+    /* First call: initialize master control, select active modules */
+    jinit_master_decompress(cinfo);
+    if (cinfo->buffered_image) {
+      /* No more work here; expecting jpeg_start_output next */
+      cinfo->global_state = DSTATE_BUFIMAGE;
+      return TRUE;
+    }
+    cinfo->global_state = DSTATE_PRELOAD;
+  }
+  if (cinfo->global_state == DSTATE_PRELOAD) {
+    /* If file has multiple scans, absorb them all into the coef buffer */
+    if (cinfo->inputctl->has_multiple_scans) {
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+      for (;;) {
+	int retcode;
+	/* Call progress monitor hook if present */
+	if (cinfo->progress != NULL)
+	  (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+	/* Absorb some more input */
+	retcode = (*cinfo->inputctl->consume_input) (cinfo);
+	if (retcode == JPEG_SUSPENDED)
+	  return FALSE;
+	if (retcode == JPEG_REACHED_EOI)
+	  break;
+	/* Advance progress counter if appropriate */
+	if (cinfo->progress != NULL &&
+	    (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
+	  if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
+	    /* jdmaster underestimated number of scans; ratchet up one scan */
+	    cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
+	  }
+	}
+      }
+#else
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif /* D_MULTISCAN_FILES_SUPPORTED */
+    }
+    cinfo->output_scan_number = cinfo->input_scan_number;
+  } else if (cinfo->global_state != DSTATE_PRESCAN)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  /* Perform any dummy output passes, and set up for the final pass */
+  return output_pass_setup(cinfo);
+}
+
+
+/*
+ * Set up for an output pass, and perform any dummy pass(es) needed.
+ * Common subroutine for jpeg_start_decompress and jpeg_start_output.
+ * Entry: global_state = DSTATE_PRESCAN only if previously suspended.
+ * Exit: If done, returns TRUE and sets global_state for proper output mode.
+ *       If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN.
+ */
+
+LOCAL(boolean)
+output_pass_setup (j_decompress_ptr cinfo)
+{
+  if (cinfo->global_state != DSTATE_PRESCAN) {
+    /* First call: do pass setup */
+    (*cinfo->master->prepare_for_output_pass) (cinfo);
+    cinfo->output_scanline = 0;
+    cinfo->global_state = DSTATE_PRESCAN;
+  }
+  /* Loop over any required dummy passes */
+  while (cinfo->master->is_dummy_pass) {
+#ifdef QUANT_2PASS_SUPPORTED
+    /* Crank through the dummy pass */
+    while (cinfo->output_scanline < cinfo->output_height) {
+      JDIMENSION last_scanline;
+      /* Call progress monitor hook if present */
+      if (cinfo->progress != NULL) {
+	cinfo->progress->pass_counter = (long) cinfo->output_scanline;
+	cinfo->progress->pass_limit = (long) cinfo->output_height;
+	(*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+      }
+      /* Process some data */
+      last_scanline = cinfo->output_scanline;
+      (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL,
+				    &cinfo->output_scanline, (JDIMENSION) 0);
+      if (cinfo->output_scanline == last_scanline)
+	return FALSE;		/* No progress made, must suspend */
+    }
+    /* Finish up dummy pass, and set up for another one */
+    (*cinfo->master->finish_output_pass) (cinfo);
+    (*cinfo->master->prepare_for_output_pass) (cinfo);
+    cinfo->output_scanline = 0;
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif /* QUANT_2PASS_SUPPORTED */
+  }
+  /* Ready for application to drive output pass through
+   * jpeg_read_scanlines or jpeg_read_raw_data.
+   */
+  cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING;
+  return TRUE;
+}
+
+
+/*
+ * Read some scanlines of data from the JPEG decompressor.
+ *
+ * The return value will be the number of lines actually read.
+ * This may be less than the number requested in several cases,
+ * including bottom of image, data source suspension, and operating
+ * modes that emit multiple scanlines at a time.
+ *
+ * Note: we warn about excess calls to jpeg_read_scanlines() since
+ * this likely signals an application programmer error.  However,
+ * an oversize buffer (max_lines > scanlines remaining) is not an error.
+ */
+
+GLOBAL(JDIMENSION)
+jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines,
+		     JDIMENSION max_lines)
+{
+  JDIMENSION row_ctr;
+
+  if (cinfo->global_state != DSTATE_SCANNING)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  if (cinfo->output_scanline >= cinfo->output_height) {
+    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
+    return 0;
+  }
+
+  /* Call progress monitor hook if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->pass_counter = (long) cinfo->output_scanline;
+    cinfo->progress->pass_limit = (long) cinfo->output_height;
+    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+  }
+
+  /* Process some data */
+  row_ctr = 0;
+  (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines);
+  cinfo->output_scanline += row_ctr;
+  return row_ctr;
+}
+
+
+/*
+ * Alternate entry point to read raw data.
+ * Processes exactly one iMCU row per call, unless suspended.
+ */
+
+GLOBAL(JDIMENSION)
+jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data,
+		    JDIMENSION max_lines)
+{
+  JDIMENSION lines_per_iMCU_row;
+
+  if (cinfo->global_state != DSTATE_RAW_OK)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  if (cinfo->output_scanline >= cinfo->output_height) {
+    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
+    return 0;
+  }
+
+  /* Call progress monitor hook if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->pass_counter = (long) cinfo->output_scanline;
+    cinfo->progress->pass_limit = (long) cinfo->output_height;
+    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+  }
+
+  /* Verify that at least one iMCU row can be returned. */
+  lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size;
+  if (max_lines < lines_per_iMCU_row)
+    ERREXIT(cinfo, JERR_BUFFER_SIZE);
+
+  /* Decompress directly into user's buffer. */
+  if (! (*cinfo->coef->decompress_data) (cinfo, data))
+    return 0;			/* suspension forced, can do nothing more */
+
+  /* OK, we processed one iMCU row. */
+  cinfo->output_scanline += lines_per_iMCU_row;
+  return lines_per_iMCU_row;
+}
+
+
+/* Additional entry points for buffered-image mode. */
+
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+
+/*
+ * Initialize for an output pass in buffered-image mode.
+ */
+
+GLOBAL(boolean)
+jpeg_start_output (j_decompress_ptr cinfo, int scan_number)
+{
+  if (cinfo->global_state != DSTATE_BUFIMAGE &&
+      cinfo->global_state != DSTATE_PRESCAN)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  /* Limit scan number to valid range */
+  if (scan_number <= 0)
+    scan_number = 1;
+  if (cinfo->inputctl->eoi_reached &&
+      scan_number > cinfo->input_scan_number)
+    scan_number = cinfo->input_scan_number;
+  cinfo->output_scan_number = scan_number;
+  /* Perform any dummy output passes, and set up for the real pass */
+  return output_pass_setup(cinfo);
+}
+
+
+/*
+ * Finish up after an output pass in buffered-image mode.
+ *
+ * Returns FALSE if suspended.  The return value need be inspected only if
+ * a suspending data source is used.
+ */
+
+GLOBAL(boolean)
+jpeg_finish_output (j_decompress_ptr cinfo)
+{
+  if ((cinfo->global_state == DSTATE_SCANNING ||
+       cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) {
+    /* Terminate this pass. */
+    /* We do not require the whole pass to have been completed. */
+    (*cinfo->master->finish_output_pass) (cinfo);
+    cinfo->global_state = DSTATE_BUFPOST;
+  } else if (cinfo->global_state != DSTATE_BUFPOST) {
+    /* BUFPOST = repeat call after a suspension, anything else is error */
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  }
+  /* Read markers looking for SOS or EOI */
+  while (cinfo->input_scan_number <= cinfo->output_scan_number &&
+	 ! cinfo->inputctl->eoi_reached) {
+    if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED)
+      return FALSE;		/* Suspend, come back later */
+  }
+  cinfo->global_state = DSTATE_BUFIMAGE;
+  return TRUE;
+}
+
+#endif /* D_MULTISCAN_FILES_SUPPORTED */

mozilla/jpeg/jdatadst.c

@@ -0,0 +1,230 @@
+/*
+ * jdatadst.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains compression data destination routines for the case of
+ * emitting JPEG data to a file (or any stdio stream).  While these routines
+ * are sufficient for most applications, some will want to use a different
+ * destination manager.
+ * IMPORTANT: we assume that fwrite() will correctly transcribe an array of
+ * JOCTETs into 8-bit-wide elements on external storage.  If char is wider
+ * than 8 bits on your machine, you may need to do some tweaking.
+ */
+
+/* this is not a core library module, so it doesn't define JPEG_INTERNALS */
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jerror.h"
+
+
+/* Expanded data destination object for stdio output */
+
+typedef struct {
+  struct jpeg_destination_mgr pub; /* public fields */
+
+  FILE * outfile;		/* target stream */
+  JOCTET * buffer;		/* start of buffer */
+} my_destination_mgr;
+
+typedef my_destination_mgr * my_dest_ptr;
+
+#define OUTPUT_BUF_SIZE  4096	/* choose an efficiently fwrite'able size */
+
+
+/*
+ * Initialize destination --- called by jpeg_start_compress
+ * before any data is actually written.
+ */
+
+METHODDEF(void)
+init_destination (j_compress_ptr cinfo)
+{
+  my_dest_ptr dest = (my_dest_ptr) cinfo->dest;
+
+  /* Allocate the output buffer --- it will be released when done with image */
+  dest->buffer = (JOCTET *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  OUTPUT_BUF_SIZE * SIZEOF(JOCTET));
+
+  dest->pub.next_output_byte = dest->buffer;
+  dest->pub.free_in_buffer = OUTPUT_BUF_SIZE;
+}
+
+
+/*
+ * Empty the output buffer --- called whenever buffer fills up.
+ *
+ * In typical applications, this should write the entire output buffer
+ * (ignoring the current state of next_output_byte & free_in_buffer),
+ * reset the pointer & count to the start of the buffer, and return TRUE
+ * indicating that the buffer has been dumped.
+ *
+ * In applications that need to be able to suspend compression due to output
+ * overrun, a FALSE return indicates that the buffer cannot be emptied now.
+ * In this situation, the compressor will return to its caller (possibly with
+ * an indication that it has not accepted all the supplied scanlines).  The
+ * application should resume compression after it has made more room in the
+ * output buffer.  Note that there are substantial restrictions on the use of
+ * suspension --- see the documentation.
+ *
+ * When suspending, the compressor will back up to a convenient restart point
+ * (typically the start of the current MCU). next_output_byte & free_in_buffer
+ * indicate where the restart point will be if the current call returns FALSE.
+ * Data beyond this point will be regenerated after resumption, so do not
+ * write it out when emptying the buffer externally.
+ */
+
+METHODDEF(boolean)
+empty_output_buffer (j_compress_ptr cinfo)
+{
+  my_dest_ptr dest = (my_dest_ptr) cinfo->dest;
+
+  if (JFWRITE(dest->outfile, dest->buffer, OUTPUT_BUF_SIZE) !=
+      (size_t) OUTPUT_BUF_SIZE)
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+
+  dest->pub.next_output_byte = dest->buffer;
+  dest->pub.free_in_buffer = OUTPUT_BUF_SIZE;
+
+  return TRUE;
+}
+
+
+/*
+ * Terminate destination --- called by jpeg_finish_compress
+ * after all data has been written.  Usually needs to flush buffer.
+ *
+ * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding
+ * application must deal with any cleanup that should happen even
+ * for error exit.
+ */
+
+METHODDEF(void)
+term_destination (j_compress_ptr cinfo)
+{
+  my_dest_ptr dest = (my_dest_ptr) cinfo->dest;
+  size_t datacount = OUTPUT_BUF_SIZE - dest->pub.free_in_buffer;
+
+  /* Write any data remaining in the buffer */
+  if (datacount > 0) {
+    if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount)
+      ERREXIT(cinfo, JERR_FILE_WRITE);
+  }
+  fflush(dest->outfile);
+  /* Make sure we wrote the output file OK */
+  if (ferror(dest->outfile))
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+
+/*
+ * Prepare for output to a stdio stream.
+ * The caller must have already opened the stream, and is responsible
+ * for closing it after finishing compression.
+ */
+
+GLOBAL(void)
+jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile)
+{
+  my_dest_ptr dest;
+
+  /* The destination object is made permanent so that multiple JPEG images
+   * can be written to the same file without re-executing jpeg_stdio_dest.
+   * This makes it dangerous to use this manager and a different destination
+   * manager serially with the same JPEG object, because their private object
+   * sizes may be different.  Caveat programmer.
+   */
+  if (cinfo->dest == NULL) {	/* first time for this JPEG object? */
+    cinfo->dest = (struct jpeg_destination_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(my_destination_mgr));
+  }
+
+  dest = (my_dest_ptr) cinfo->dest;
+  dest->pub.init_destination = init_destination;
+  dest->pub.empty_output_buffer = empty_output_buffer;
+  dest->pub.term_destination = term_destination;
+  dest->outfile = outfile;
+}
+
+/*
+ * term_destination_file_close --- called by jpeg_finish_compress
+ * after all data has been written.  Usually needs to flush buffer.
+ * also will need to close file
+ * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding
+ * application must deal with any cleanup that should happen even
+ * for error exit.
+ */
+
+METHODDEF(void)
+term_destination_file_close(j_compress_ptr cinfo)
+{
+  my_dest_ptr dest = (my_dest_ptr) cinfo->dest;
+  size_t datacount = OUTPUT_BUF_SIZE - dest->pub.free_in_buffer;
+
+  /* Write any data remaining in the buffer */
+  if (datacount > 0) {
+    if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount)
+      ERREXIT(cinfo, JERR_FILE_WRITE);
+  }
+  fflush(dest->outfile);
+  
+  /* Make sure we wrote the output file OK */
+  if (ferror(dest->outfile))
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+  else
+      fclose(dest->outfile);
+}
+
+
+
+
+
+/*
+ * Prepare for output to a file from a char *
+ * The caller is responsible
+ * for closing it after finishing compression.
+ */
+
+GLOBAL(void)
+jpeg_file_dest (j_compress_ptr cinfo, char * outfile)
+{
+  my_dest_ptr dest;
+
+  /* The destination object is made permanent so that multiple JPEG images
+   * can be written to the same file without re-executing jpeg_stdio_dest.
+   * This makes it dangerous to use this manager and a different destination
+   * manager serially with the same JPEG object, because their private object
+   * sizes may be different.  Caveat programmer.
+   */
+  if (cinfo->dest == NULL) {	/* first time for this JPEG object? */
+    cinfo->dest = (struct jpeg_destination_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(my_destination_mgr));
+  }
+
+  dest = (my_dest_ptr) cinfo->dest;
+  dest->pub.init_destination = init_destination;
+  dest->pub.empty_output_buffer = empty_output_buffer;
+  dest->pub.term_destination = term_destination_file_close;
+  dest->outfile = fopen(outfile,"wb");
+}
+
+
+
+/*
+API to close file in case of error. needed for win16. DLL that opens file must also close it.
+*/
+
+GLOBAL(void)
+jpeg_close_file(j_compress_ptr cinfo)
+{
+  my_dest_ptr dest = (my_dest_ptr) cinfo->dest;
+  fclose(dest->outfile);
+}
+
+
+

mozilla/jpeg/jdatasrc.c

@@ -0,0 +1,212 @@
+/*
+ * jdatasrc.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains decompression data source routines for the case of
+ * reading JPEG data from a file (or any stdio stream).  While these routines
+ * are sufficient for most applications, some will want to use a different
+ * source manager.
+ * IMPORTANT: we assume that fread() will correctly transcribe an array of
+ * JOCTETs from 8-bit-wide elements on external storage.  If char is wider
+ * than 8 bits on your machine, you may need to do some tweaking.
+ */
+
+/* this is not a core library module, so it doesn't define JPEG_INTERNALS */
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jerror.h"
+
+
+/* Expanded data source object for stdio input */
+
+typedef struct {
+  struct jpeg_source_mgr pub;	/* public fields */
+
+  FILE * infile;		/* source stream */
+  JOCTET * buffer;		/* start of buffer */
+  boolean start_of_file;	/* have we gotten any data yet? */
+} my_source_mgr;
+
+typedef my_source_mgr * my_src_ptr;
+
+#define INPUT_BUF_SIZE  4096	/* choose an efficiently fread'able size */
+
+
+/*
+ * Initialize source --- called by jpeg_read_header
+ * before any data is actually read.
+ */
+
+METHODDEF(void)
+init_source (j_decompress_ptr cinfo)
+{
+  my_src_ptr src = (my_src_ptr) cinfo->src;
+
+  /* We reset the empty-input-file flag for each image,
+   * but we don't clear the input buffer.
+   * This is correct behavior for reading a series of images from one source.
+   */
+  src->start_of_file = TRUE;
+}
+
+
+/*
+ * Fill the input buffer --- called whenever buffer is emptied.
+ *
+ * In typical applications, this should read fresh data into the buffer
+ * (ignoring the current state of next_input_byte & bytes_in_buffer),
+ * reset the pointer & count to the start of the buffer, and return TRUE
+ * indicating that the buffer has been reloaded.  It is not necessary to
+ * fill the buffer entirely, only to obtain at least one more byte.
+ *
+ * There is no such thing as an EOF return.  If the end of the file has been
+ * reached, the routine has a choice of ERREXIT() or inserting fake data into
+ * the buffer.  In most cases, generating a warning message and inserting a
+ * fake EOI marker is the best course of action --- this will allow the
+ * decompressor to output however much of the image is there.  However,
+ * the resulting error message is misleading if the real problem is an empty
+ * input file, so we handle that case specially.
+ *
+ * In applications that need to be able to suspend compression due to input
+ * not being available yet, a FALSE return indicates that no more data can be
+ * obtained right now, but more may be forthcoming later.  In this situation,
+ * the decompressor will return to its caller (with an indication of the
+ * number of scanlines it has read, if any).  The application should resume
+ * decompression after it has loaded more data into the input buffer.  Note
+ * that there are substantial restrictions on the use of suspension --- see
+ * the documentation.
+ *
+ * When suspending, the decompressor will back up to a convenient restart point
+ * (typically the start of the current MCU). next_input_byte & bytes_in_buffer
+ * indicate where the restart point will be if the current call returns FALSE.
+ * Data beyond this point must be rescanned after resumption, so move it to
+ * the front of the buffer rather than discarding it.
+ */
+
+METHODDEF(boolean)
+fill_input_buffer (j_decompress_ptr cinfo)
+{
+  my_src_ptr src = (my_src_ptr) cinfo->src;
+  size_t nbytes;
+
+  nbytes = JFREAD(src->infile, src->buffer, INPUT_BUF_SIZE);
+
+  if (nbytes <= 0) {
+    if (src->start_of_file)	/* Treat empty input file as fatal error */
+      ERREXIT(cinfo, JERR_INPUT_EMPTY);
+    WARNMS(cinfo, JWRN_JPEG_EOF);
+    /* Insert a fake EOI marker */
+    src->buffer[0] = (JOCTET) 0xFF;
+    src->buffer[1] = (JOCTET) JPEG_EOI;
+    nbytes = 2;
+  }
+
+  src->pub.next_input_byte = src->buffer;
+  src->pub.bytes_in_buffer = nbytes;
+  src->start_of_file = FALSE;
+
+  return TRUE;
+}
+
+
+/*
+ * Skip data --- used to skip over a potentially large amount of
+ * uninteresting data (such as an APPn marker).
+ *
+ * Writers of suspendable-input applications must note that skip_input_data
+ * is not granted the right to give a suspension return.  If the skip extends
+ * beyond the data currently in the buffer, the buffer can be marked empty so
+ * that the next read will cause a fill_input_buffer call that can suspend.
+ * Arranging for additional bytes to be discarded before reloading the input
+ * buffer is the application writer's problem.
+ */
+
+METHODDEF(void)
+skip_input_data (j_decompress_ptr cinfo, long num_bytes)
+{
+  my_src_ptr src = (my_src_ptr) cinfo->src;
+
+  /* Just a dumb implementation for now.  Could use fseek() except
+   * it doesn't work on pipes.  Not clear that being smart is worth
+   * any trouble anyway --- large skips are infrequent.
+   */
+  if (num_bytes > 0) {
+    while (num_bytes > (long) src->pub.bytes_in_buffer) {
+      num_bytes -= (long) src->pub.bytes_in_buffer;
+      (void) fill_input_buffer(cinfo);
+      /* note we assume that fill_input_buffer will never return FALSE,
+       * so suspension need not be handled.
+       */
+    }
+    src->pub.next_input_byte += (size_t) num_bytes;
+    src->pub.bytes_in_buffer -= (size_t) num_bytes;
+  }
+}
+
+
+/*
+ * An additional method that can be provided by data source modules is the
+ * resync_to_restart method for error recovery in the presence of RST markers.
+ * For the moment, this source module just uses the default resync method
+ * provided by the JPEG library.  That method assumes that no backtracking
+ * is possible.
+ */
+
+
+/*
+ * Terminate source --- called by jpeg_finish_decompress
+ * after all data has been read.  Often a no-op.
+ *
+ * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding
+ * application must deal with any cleanup that should happen even
+ * for error exit.
+ */
+
+METHODDEF(void)
+term_source (j_decompress_ptr cinfo)
+{
+  /* no work necessary here */
+}
+
+
+/*
+ * Prepare for input from a stdio stream.
+ * The caller must have already opened the stream, and is responsible
+ * for closing it after finishing decompression.
+ */
+
+GLOBAL(void)
+jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile)
+{
+  my_src_ptr src;
+
+  /* The source object and input buffer are made permanent so that a series
+   * of JPEG images can be read from the same file by calling jpeg_stdio_src
+   * only before the first one.  (If we discarded the buffer at the end of
+   * one image, we'd likely lose the start of the next one.)
+   * This makes it unsafe to use this manager and a different source
+   * manager serially with the same JPEG object.  Caveat programmer.
+   */
+  if (cinfo->src == NULL) {	/* first time for this JPEG object? */
+    cinfo->src = (struct jpeg_source_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(my_source_mgr));
+    src = (my_src_ptr) cinfo->src;
+    src->buffer = (JOCTET *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  INPUT_BUF_SIZE * SIZEOF(JOCTET));
+  }
+
+  src = (my_src_ptr) cinfo->src;
+  src->pub.init_source = init_source;
+  src->pub.fill_input_buffer = fill_input_buffer;
+  src->pub.skip_input_data = skip_input_data;
+  src->pub.resync_to_restart = jpeg_resync_to_restart; /* use default method */
+  src->pub.term_source = term_source;
+  src->infile = infile;
+  src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */
+  src->pub.next_input_byte = NULL; /* until buffer loaded */
+}

mozilla/jpeg/jdcoefct.c

@@ -0,0 +1,736 @@
+/*
+ * jdcoefct.c
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the coefficient buffer controller for decompression.
+ * This controller is the top level of the JPEG decompressor proper.
+ * The coefficient buffer lies between entropy decoding and inverse-DCT steps.
+ *
+ * In buffered-image mode, this controller is the interface between
+ * input-oriented processing and output-oriented processing.
+ * Also, the input side (only) is used when reading a file for transcoding.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+/* Block smoothing is only applicable for progressive JPEG, so: */
+#ifndef D_PROGRESSIVE_SUPPORTED
+#undef BLOCK_SMOOTHING_SUPPORTED
+#endif
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_d_coef_controller pub; /* public fields */
+
+  /* These variables keep track of the current location of the input side. */
+  /* cinfo->input_iMCU_row is also used for this. */
+  JDIMENSION MCU_ctr;		/* counts MCUs processed in current row */
+  int MCU_vert_offset;		/* counts MCU rows within iMCU row */
+  int MCU_rows_per_iMCU_row;	/* number of such rows needed */
+
+  /* The output side's location is represented by cinfo->output_iMCU_row. */
+
+  /* In single-pass modes, it's sufficient to buffer just one MCU.
+   * We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks,
+   * and let the entropy decoder write into that workspace each time.
+   * (On 80x86, the workspace is FAR even though it's not really very big;
+   * this is to keep the module interfaces unchanged when a large coefficient
+   * buffer is necessary.)
+   * In multi-pass modes, this array points to the current MCU's blocks
+   * within the virtual arrays; it is used only by the input side.
+   */
+  JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU];
+
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+  /* In multi-pass modes, we need a virtual block array for each component. */
+  jvirt_barray_ptr whole_image[MAX_COMPONENTS];
+#endif
+
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+  /* When doing block smoothing, we latch coefficient Al values here */
+  int * coef_bits_latch;
+#define SAVED_COEFS  6		/* we save coef_bits[0..5] */
+#endif
+} my_coef_controller;
+
+typedef my_coef_controller * my_coef_ptr;
+
+/* Forward declarations */
+METHODDEF(int) decompress_onepass
+	JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+METHODDEF(int) decompress_data
+	JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
+#endif
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+LOCAL(boolean) smoothing_ok JPP((j_decompress_ptr cinfo));
+METHODDEF(int) decompress_smooth_data
+	JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
+#endif
+
+
+LOCAL(void)
+start_iMCU_row (j_decompress_ptr cinfo)
+/* Reset within-iMCU-row counters for a new row (input side) */
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+
+  /* In an interleaved scan, an MCU row is the same as an iMCU row.
+   * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
+   * But at the bottom of the image, process only what's left.
+   */
+  if (cinfo->comps_in_scan > 1) {
+    coef->MCU_rows_per_iMCU_row = 1;
+  } else {
+    if (cinfo->input_iMCU_row < (cinfo->total_iMCU_rows-1))
+      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
+    else
+      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
+  }
+
+  coef->MCU_ctr = 0;
+  coef->MCU_vert_offset = 0;
+}
+
+
+/*
+ * Initialize for an input processing pass.
+ */
+
+METHODDEF(void)
+start_input_pass (j_decompress_ptr cinfo)
+{
+  cinfo->input_iMCU_row = 0;
+  start_iMCU_row(cinfo);
+}
+
+
+/*
+ * Initialize for an output processing pass.
+ */
+
+METHODDEF(void)
+start_output_pass (j_decompress_ptr cinfo)
+{
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+
+  /* If multipass, check to see whether to use block smoothing on this pass */
+  if (coef->pub.coef_arrays != NULL) {
+    if (cinfo->do_block_smoothing && smoothing_ok(cinfo))
+      coef->pub.decompress_data = decompress_smooth_data;
+    else
+      coef->pub.decompress_data = decompress_data;
+  }
+#endif
+  cinfo->output_iMCU_row = 0;
+}
+
+
+/*
+ * Decompress and return some data in the single-pass case.
+ * Always attempts to emit one fully interleaved MCU row ("iMCU" row).
+ * Input and output must run in lockstep since we have only a one-MCU buffer.
+ * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
+ *
+ * NB: output_buf contains a plane for each component in image,
+ * which we index according to the component's SOF position.
+ */
+
+METHODDEF(int)
+decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION MCU_col_num;	/* index of current MCU within row */
+  JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  int blkn, ci, xindex, yindex, yoffset, useful_width;
+  JSAMPARRAY output_ptr;
+  JDIMENSION start_col, output_col;
+  jpeg_component_info *compptr;
+  inverse_DCT_method_ptr inverse_DCT;
+
+  /* Loop to process as much as one whole iMCU row */
+  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
+       yoffset++) {
+    for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col;
+	 MCU_col_num++) {
+      /* Try to fetch an MCU.  Entropy decoder expects buffer to be zeroed. */
+      jzero_far((void FAR *) coef->MCU_buffer[0],
+		(size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK)));
+      if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
+	/* Suspension forced; update state counters and exit */
+	coef->MCU_vert_offset = yoffset;
+	coef->MCU_ctr = MCU_col_num;
+	return JPEG_SUSPENDED;
+      }
+      /* Determine where data should go in output_buf and do the IDCT thing.
+       * We skip dummy blocks at the right and bottom edges (but blkn gets
+       * incremented past them!).  Note the inner loop relies on having
+       * allocated the MCU_buffer[] blocks sequentially.
+       */
+      blkn = 0;			/* index of current DCT block within MCU */
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+	compptr = cinfo->cur_comp_info[ci];
+	/* Don't bother to IDCT an uninteresting component. */
+	if (! compptr->component_needed) {
+	  blkn += compptr->MCU_blocks;
+	  continue;
+	}
+	inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index];
+	useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
+						    : compptr->last_col_width;
+	output_ptr = output_buf[compptr->component_index] +
+	  yoffset * compptr->DCT_scaled_size;
+	start_col = MCU_col_num * compptr->MCU_sample_width;
+	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+	  if (cinfo->input_iMCU_row < last_iMCU_row ||
+	      yoffset+yindex < compptr->last_row_height) {
+	    output_col = start_col;
+	    for (xindex = 0; xindex < useful_width; xindex++) {
+	      (*inverse_DCT) (cinfo, compptr,
+			      (JCOEFPTR) coef->MCU_buffer[blkn+xindex],
+			      output_ptr, output_col);
+	      output_col += compptr->DCT_scaled_size;
+	    }
+	  }
+	  blkn += compptr->MCU_width;
+	  output_ptr += compptr->DCT_scaled_size;
+	}
+      }
+    }
+    /* Completed an MCU row, but perhaps not an iMCU row */
+    coef->MCU_ctr = 0;
+  }
+  /* Completed the iMCU row, advance counters for next one */
+  cinfo->output_iMCU_row++;
+  if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) {
+    start_iMCU_row(cinfo);
+    return JPEG_ROW_COMPLETED;
+  }
+  /* Completed the scan */
+  (*cinfo->inputctl->finish_input_pass) (cinfo);
+  return JPEG_SCAN_COMPLETED;
+}
+
+
+/*
+ * Dummy consume-input routine for single-pass operation.
+ */
+
+METHODDEF(int)
+dummy_consume_data (j_decompress_ptr cinfo)
+{
+  return JPEG_SUSPENDED;	/* Always indicate nothing was done */
+}
+
+
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+
+/*
+ * Consume input data and store it in the full-image coefficient buffer.
+ * We read as much as one fully interleaved MCU row ("iMCU" row) per call,
+ * ie, v_samp_factor block rows for each component in the scan.
+ * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
+ */
+
+METHODDEF(int)
+consume_data (j_decompress_ptr cinfo)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION MCU_col_num;	/* index of current MCU within row */
+  int blkn, ci, xindex, yindex, yoffset;
+  JDIMENSION start_col;
+  JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
+  JBLOCKROW buffer_ptr;
+  jpeg_component_info *compptr;
+
+  /* Align the virtual buffers for the components used in this scan. */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    buffer[ci] = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
+       cinfo->input_iMCU_row * compptr->v_samp_factor,
+       (JDIMENSION) compptr->v_samp_factor, TRUE);
+    /* Note: entropy decoder expects buffer to be zeroed,
+     * but this is handled automatically by the memory manager
+     * because we requested a pre-zeroed array.
+     */
+  }
+
+  /* Loop to process one whole iMCU row */
+  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
+       yoffset++) {
+    for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row;
+	 MCU_col_num++) {
+      /* Construct list of pointers to DCT blocks belonging to this MCU */
+      blkn = 0;			/* index of current DCT block within MCU */
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+	compptr = cinfo->cur_comp_info[ci];
+	start_col = MCU_col_num * compptr->MCU_width;
+	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+	  buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
+	  for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
+	    coef->MCU_buffer[blkn++] = buffer_ptr++;
+	  }
+	}
+      }
+      /* Try to fetch the MCU. */
+      if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
+	/* Suspension forced; update state counters and exit */
+	coef->MCU_vert_offset = yoffset;
+	coef->MCU_ctr = MCU_col_num;
+	return JPEG_SUSPENDED;
+      }
+    }
+    /* Completed an MCU row, but perhaps not an iMCU row */
+    coef->MCU_ctr = 0;
+  }
+  /* Completed the iMCU row, advance counters for next one */
+  if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) {
+    start_iMCU_row(cinfo);
+    return JPEG_ROW_COMPLETED;
+  }
+  /* Completed the scan */
+  (*cinfo->inputctl->finish_input_pass) (cinfo);
+  return JPEG_SCAN_COMPLETED;
+}
+
+
+/*
+ * Decompress and return some data in the multi-pass case.
+ * Always attempts to emit one fully interleaved MCU row ("iMCU" row).
+ * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
+ *
+ * NB: output_buf contains a plane for each component in image.
+ */
+
+METHODDEF(int)
+decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  JDIMENSION block_num;
+  int ci, block_row, block_rows;
+  JBLOCKARRAY buffer;
+  JBLOCKROW buffer_ptr;
+  JSAMPARRAY output_ptr;
+  JDIMENSION output_col;
+  jpeg_component_info *compptr;
+  inverse_DCT_method_ptr inverse_DCT;
+
+  /* Force some input to be done if we are getting ahead of the input. */
+  while (cinfo->input_scan_number < cinfo->output_scan_number ||
+	 (cinfo->input_scan_number == cinfo->output_scan_number &&
+	  cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) {
+    if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED)
+      return JPEG_SUSPENDED;
+  }
+
+  /* OK, output from the virtual arrays. */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Don't bother to IDCT an uninteresting component. */
+    if (! compptr->component_needed)
+      continue;
+    /* Align the virtual buffer for this component. */
+    buffer = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr) cinfo, coef->whole_image[ci],
+       cinfo->output_iMCU_row * compptr->v_samp_factor,
+       (JDIMENSION) compptr->v_samp_factor, FALSE);
+    /* Count non-dummy DCT block rows in this iMCU row. */
+    if (cinfo->output_iMCU_row < last_iMCU_row)
+      block_rows = compptr->v_samp_factor;
+    else {
+      /* NB: can't use last_row_height here; it is input-side-dependent! */
+      block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
+      if (block_rows == 0) block_rows = compptr->v_samp_factor;
+    }
+    inverse_DCT = cinfo->idct->inverse_DCT[ci];
+    output_ptr = output_buf[ci];
+    /* Loop over all DCT blocks to be processed. */
+    for (block_row = 0; block_row < block_rows; block_row++) {
+      buffer_ptr = buffer[block_row];
+      output_col = 0;
+      for (block_num = 0; block_num < compptr->width_in_blocks; block_num++) {
+	(*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr,
+			output_ptr, output_col);
+	buffer_ptr++;
+	output_col += compptr->DCT_scaled_size;
+      }
+      output_ptr += compptr->DCT_scaled_size;
+    }
+  }
+
+  if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows)
+    return JPEG_ROW_COMPLETED;
+  return JPEG_SCAN_COMPLETED;
+}
+
+#endif /* D_MULTISCAN_FILES_SUPPORTED */
+
+
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+
+/*
+ * This code applies interblock smoothing as described by section K.8
+ * of the JPEG standard: the first 5 AC coefficients are estimated from
+ * the DC values of a DCT block and its 8 neighboring blocks.
+ * We apply smoothing only for progressive JPEG decoding, and only if
+ * the coefficients it can estimate are not yet known to full precision.
+ */
+
+/* Natural-order array positions of the first 5 zigzag-order coefficients */
+#define Q01_POS  1
+#define Q10_POS  8
+#define Q20_POS  16
+#define Q11_POS  9
+#define Q02_POS  2
+
+/*
+ * Determine whether block smoothing is applicable and safe.
+ * We also latch the current states of the coef_bits[] entries for the
+ * AC coefficients; otherwise, if the input side of the decompressor
+ * advances into a new scan, we might think the coefficients are known
+ * more accurately than they really are.
+ */
+
+LOCAL(boolean)
+smoothing_ok (j_decompress_ptr cinfo)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  boolean smoothing_useful = FALSE;
+  int ci, coefi;
+  jpeg_component_info *compptr;
+  JQUANT_TBL * qtable;
+  int * coef_bits;
+  int * coef_bits_latch;
+
+  if (! cinfo->progressive_mode || cinfo->coef_bits == NULL)
+    return FALSE;
+
+  /* Allocate latch area if not already done */
+  if (coef->coef_bits_latch == NULL)
+    coef->coef_bits_latch = (int *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  cinfo->num_components *
+				  (SAVED_COEFS * SIZEOF(int)));
+  coef_bits_latch = coef->coef_bits_latch;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* All components' quantization values must already be latched. */
+    if ((qtable = compptr->quant_table) == NULL)
+      return FALSE;
+    /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */
+    if (qtable->quantval[0] == 0 ||
+	qtable->quantval[Q01_POS] == 0 ||
+	qtable->quantval[Q10_POS] == 0 ||
+	qtable->quantval[Q20_POS] == 0 ||
+	qtable->quantval[Q11_POS] == 0 ||
+	qtable->quantval[Q02_POS] == 0)
+      return FALSE;
+    /* DC values must be at least partly known for all components. */
+    coef_bits = cinfo->coef_bits[ci];
+    if (coef_bits[0] < 0)
+      return FALSE;
+    /* Block smoothing is helpful if some AC coefficients remain inaccurate. */
+    for (coefi = 1; coefi <= 5; coefi++) {
+      coef_bits_latch[coefi] = coef_bits[coefi];
+      if (coef_bits[coefi] != 0)
+	smoothing_useful = TRUE;
+    }
+    coef_bits_latch += SAVED_COEFS;
+  }
+
+  return smoothing_useful;
+}
+
+
+/*
+ * Variant of decompress_data for use when doing block smoothing.
+ */
+
+METHODDEF(int)
+decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  JDIMENSION block_num, last_block_column;
+  int ci, block_row, block_rows, access_rows;
+  JBLOCKARRAY buffer;
+  JBLOCKROW buffer_ptr, prev_block_row, next_block_row;
+  JSAMPARRAY output_ptr;
+  JDIMENSION output_col;
+  jpeg_component_info *compptr;
+  inverse_DCT_method_ptr inverse_DCT;
+  boolean first_row, last_row;
+  JBLOCK workspace;
+  int *coef_bits;
+  JQUANT_TBL *quanttbl;
+  INT32 Q00,Q01,Q02,Q10,Q11,Q20, num;
+  int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9;
+  int Al, pred;
+
+  /* Force some input to be done if we are getting ahead of the input. */
+  while (cinfo->input_scan_number <= cinfo->output_scan_number &&
+	 ! cinfo->inputctl->eoi_reached) {
+    if (cinfo->input_scan_number == cinfo->output_scan_number) {
+      /* If input is working on current scan, we ordinarily want it to
+       * have completed the current row.  But if input scan is DC,
+       * we want it to keep one row ahead so that next block row's DC
+       * values are up to date.
+       */
+      JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0;
+      if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta)
+	break;
+    }
+    if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED)
+      return JPEG_SUSPENDED;
+  }
+
+  /* OK, output from the virtual arrays. */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Don't bother to IDCT an uninteresting component. */
+    if (! compptr->component_needed)
+      continue;
+    /* Count non-dummy DCT block rows in this iMCU row. */
+    if (cinfo->output_iMCU_row < last_iMCU_row) {
+      block_rows = compptr->v_samp_factor;
+      access_rows = block_rows * 2; /* this and next iMCU row */
+      last_row = FALSE;
+    } else {
+      /* NB: can't use last_row_height here; it is input-side-dependent! */
+      block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
+      if (block_rows == 0) block_rows = compptr->v_samp_factor;
+      access_rows = block_rows; /* this iMCU row only */
+      last_row = TRUE;
+    }
+    /* Align the virtual buffer for this component. */
+    if (cinfo->output_iMCU_row > 0) {
+      access_rows += compptr->v_samp_factor; /* prior iMCU row too */
+      buffer = (*cinfo->mem->access_virt_barray)
+	((j_common_ptr) cinfo, coef->whole_image[ci],
+	 (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor,
+	 (JDIMENSION) access_rows, FALSE);
+      buffer += compptr->v_samp_factor;	/* point to current iMCU row */
+      first_row = FALSE;
+    } else {
+      buffer = (*cinfo->mem->access_virt_barray)
+	((j_common_ptr) cinfo, coef->whole_image[ci],
+	 (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE);
+      first_row = TRUE;
+    }
+    /* Fetch component-dependent info */
+    coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS);
+    quanttbl = compptr->quant_table;
+    Q00 = quanttbl->quantval[0];
+    Q01 = quanttbl->quantval[Q01_POS];
+    Q10 = quanttbl->quantval[Q10_POS];
+    Q20 = quanttbl->quantval[Q20_POS];
+    Q11 = quanttbl->quantval[Q11_POS];
+    Q02 = quanttbl->quantval[Q02_POS];
+    inverse_DCT = cinfo->idct->inverse_DCT[ci];
+    output_ptr = output_buf[ci];
+    /* Loop over all DCT blocks to be processed. */
+    for (block_row = 0; block_row < block_rows; block_row++) {
+      buffer_ptr = buffer[block_row];
+      if (first_row && block_row == 0)
+	prev_block_row = buffer_ptr;
+      else
+	prev_block_row = buffer[block_row-1];
+      if (last_row && block_row == block_rows-1)
+	next_block_row = buffer_ptr;
+      else
+	next_block_row = buffer[block_row+1];
+      /* We fetch the surrounding DC values using a sliding-register approach.
+       * Initialize all nine here so as to do the right thing on narrow pics.
+       */
+      DC1 = DC2 = DC3 = (int) prev_block_row[0][0];
+      DC4 = DC5 = DC6 = (int) buffer_ptr[0][0];
+      DC7 = DC8 = DC9 = (int) next_block_row[0][0];
+      output_col = 0;
+      last_block_column = compptr->width_in_blocks - 1;
+      for (block_num = 0; block_num <= last_block_column; block_num++) {
+	/* Fetch current DCT block into workspace so we can modify it. */
+	jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1);
+	/* Update DC values */
+	if (block_num < last_block_column) {
+	  DC3 = (int) prev_block_row[1][0];
+	  DC6 = (int) buffer_ptr[1][0];
+	  DC9 = (int) next_block_row[1][0];
+	}
+	/* Compute coefficient estimates per K.8.
+	 * An estimate is applied only if coefficient is still zero,
+	 * and is not known to be fully accurate.
+	 */
+	/* AC01 */
+	if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) {
+	  num = 36 * Q00 * (DC4 - DC6);
+	  if (num >= 0) {
+	    pred = (int) (((Q01<<7) + num) / (Q01<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	  } else {
+	    pred = (int) (((Q01<<7) - num) / (Q01<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	    pred = -pred;
+	  }
+	  workspace[1] = (JCOEF) pred;
+	}
+	/* AC10 */
+	if ((Al=coef_bits[2]) != 0 && workspace[8] == 0) {
+	  num = 36 * Q00 * (DC2 - DC8);
+	  if (num >= 0) {
+	    pred = (int) (((Q10<<7) + num) / (Q10<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	  } else {
+	    pred = (int) (((Q10<<7) - num) / (Q10<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	    pred = -pred;
+	  }
+	  workspace[8] = (JCOEF) pred;
+	}
+	/* AC20 */
+	if ((Al=coef_bits[3]) != 0 && workspace[16] == 0) {
+	  num = 9 * Q00 * (DC2 + DC8 - 2*DC5);
+	  if (num >= 0) {
+	    pred = (int) (((Q20<<7) + num) / (Q20<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	  } else {
+	    pred = (int) (((Q20<<7) - num) / (Q20<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	    pred = -pred;
+	  }
+	  workspace[16] = (JCOEF) pred;
+	}
+	/* AC11 */
+	if ((Al=coef_bits[4]) != 0 && workspace[9] == 0) {
+	  num = 5 * Q00 * (DC1 - DC3 - DC7 + DC9);
+	  if (num >= 0) {
+	    pred = (int) (((Q11<<7) + num) / (Q11<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	  } else {
+	    pred = (int) (((Q11<<7) - num) / (Q11<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	    pred = -pred;
+	  }
+	  workspace[9] = (JCOEF) pred;
+	}
+	/* AC02 */
+	if ((Al=coef_bits[5]) != 0 && workspace[2] == 0) {
+	  num = 9 * Q00 * (DC4 + DC6 - 2*DC5);
+	  if (num >= 0) {
+	    pred = (int) (((Q02<<7) + num) / (Q02<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	  } else {
+	    pred = (int) (((Q02<<7) - num) / (Q02<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	    pred = -pred;
+	  }
+	  workspace[2] = (JCOEF) pred;
+	}
+	/* OK, do the IDCT */
+	(*inverse_DCT) (cinfo, compptr, (JCOEFPTR) workspace,
+			output_ptr, output_col);
+	/* Advance for next column */
+	DC1 = DC2; DC2 = DC3;
+	DC4 = DC5; DC5 = DC6;
+	DC7 = DC8; DC8 = DC9;
+	buffer_ptr++, prev_block_row++, next_block_row++;
+	output_col += compptr->DCT_scaled_size;
+      }
+      output_ptr += compptr->DCT_scaled_size;
+    }
+  }
+
+  if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows)
+    return JPEG_ROW_COMPLETED;
+  return JPEG_SCAN_COMPLETED;
+}
+
+#endif /* BLOCK_SMOOTHING_SUPPORTED */
+
+
+/*
+ * Initialize coefficient buffer controller.
+ */
+
+GLOBAL(void)
+jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
+{
+  my_coef_ptr coef;
+
+  coef = (my_coef_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_coef_controller));
+  cinfo->coef = (struct jpeg_d_coef_controller *) coef;
+  coef->pub.start_input_pass = start_input_pass;
+  coef->pub.start_output_pass = start_output_pass;
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+  coef->coef_bits_latch = NULL;
+#endif
+
+  /* Create the coefficient buffer. */
+  if (need_full_buffer) {
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+    /* Allocate a full-image virtual array for each component, */
+    /* padded to a multiple of samp_factor DCT blocks in each direction. */
+    /* Note we ask for a pre-zeroed array. */
+    int ci, access_rows;
+    jpeg_component_info *compptr;
+
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      access_rows = compptr->v_samp_factor;
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+      /* If block smoothing could be used, need a bigger window */
+      if (cinfo->progressive_mode)
+	access_rows *= 3;
+#endif
+      coef->whole_image[ci] = (*cinfo->mem->request_virt_barray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE,
+	 (JDIMENSION) jround_up((long) compptr->width_in_blocks,
+				(long) compptr->h_samp_factor),
+	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
+				(long) compptr->v_samp_factor),
+	 (JDIMENSION) access_rows);
+    }
+    coef->pub.consume_data = consume_data;
+    coef->pub.decompress_data = decompress_data;
+    coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+  } else {
+    /* We only need a single-MCU buffer. */
+    JBLOCKROW buffer;
+    int i;
+
+    buffer = (JBLOCKROW)
+      (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
+    for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) {
+      coef->MCU_buffer[i] = buffer + i;
+    }
+    coef->pub.consume_data = dummy_consume_data;
+    coef->pub.decompress_data = decompress_onepass;
+    coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */
+  }
+}

mozilla/jpeg/jdcolor.c

@@ -0,0 +1,396 @@
+/*
+ * jdcolor.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains output colorspace conversion routines.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Private subobject */
+
+typedef struct {
+  struct jpeg_color_deconverter pub; /* public fields */
+
+  /* Private state for YCC->RGB conversion */
+  int * Cr_r_tab;		/* => table for Cr to R conversion */
+  int * Cb_b_tab;		/* => table for Cb to B conversion */
+  INT32 * Cr_g_tab;		/* => table for Cr to G conversion */
+  INT32 * Cb_g_tab;		/* => table for Cb to G conversion */
+} my_color_deconverter;
+
+typedef my_color_deconverter * my_cconvert_ptr;
+
+
+/**************** YCbCr -> RGB conversion: most common case **************/
+
+/*
+ * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
+ * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
+ * The conversion equations to be implemented are therefore
+ *	R = Y                + 1.40200 * Cr
+ *	G = Y - 0.34414 * Cb - 0.71414 * Cr
+ *	B = Y + 1.77200 * Cb
+ * where Cb and Cr represent the incoming values less CENTERJSAMPLE.
+ * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
+ *
+ * To avoid floating-point arithmetic, we represent the fractional constants
+ * as integers scaled up by 2^16 (about 4 digits precision); we have to divide
+ * the products by 2^16, with appropriate rounding, to get the correct answer.
+ * Notice that Y, being an integral input, does not contribute any fraction
+ * so it need not participate in the rounding.
+ *
+ * For even more speed, we avoid doing any multiplications in the inner loop
+ * by precalculating the constants times Cb and Cr for all possible values.
+ * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
+ * for 12-bit samples it is still acceptable.  It's not very reasonable for
+ * 16-bit samples, but if you want lossless storage you shouldn't be changing
+ * colorspace anyway.
+ * The Cr=>R and Cb=>B values can be rounded to integers in advance; the
+ * values for the G calculation are left scaled up, since we must add them
+ * together before rounding.
+ */
+
+#define SCALEBITS	16	/* speediest right-shift on some machines */
+#define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
+#define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
+
+
+/*
+ * Initialize tables for YCC->RGB colorspace conversion.
+ */
+
+LOCAL(void)
+build_ycc_rgb_table (j_decompress_ptr cinfo)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  int i;
+  INT32 x;
+  SHIFT_TEMPS
+
+  cconvert->Cr_r_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  cconvert->Cb_b_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  cconvert->Cr_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+  cconvert->Cb_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+
+  for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
+    /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
+    /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
+    /* Cr=>R value is nearest int to 1.40200 * x */
+    cconvert->Cr_r_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
+    /* Cb=>B value is nearest int to 1.77200 * x */
+    cconvert->Cb_b_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
+    /* Cr=>G value is scaled-up -0.71414 * x */
+    cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x;
+    /* Cb=>G value is scaled-up -0.34414 * x */
+    /* We also add in ONE_HALF so that need not do it in inner loop */
+    cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the output colorspace.
+ *
+ * Note that we change from noninterleaved, one-plane-per-component format
+ * to interleaved-pixel format.  The output buffer is therefore three times
+ * as wide as the input buffer.
+ * A starting row offset is provided only for the input buffer.  The caller
+ * can easily adjust the passed output_buf value to accommodate any row
+ * offset required on that side.
+ */
+
+METHODDEF(void)
+ycc_rgb_convert (j_decompress_ptr cinfo,
+		 JSAMPIMAGE input_buf, JDIMENSION input_row,
+		 JSAMPARRAY output_buf, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register int y, cb, cr;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+  /* copy these pointers into registers if possible */
+  register JSAMPLE * range_limit = cinfo->sample_range_limit;
+  register int * Crrtab = cconvert->Cr_r_tab;
+  register int * Cbbtab = cconvert->Cb_b_tab;
+  register INT32 * Crgtab = cconvert->Cr_g_tab;
+  register INT32 * Cbgtab = cconvert->Cb_g_tab;
+  SHIFT_TEMPS
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      y  = GETJSAMPLE(inptr0[col]);
+      cb = GETJSAMPLE(inptr1[col]);
+      cr = GETJSAMPLE(inptr2[col]);
+      /* Range-limiting is essential due to noise introduced by DCT losses. */
+      outptr[RGB_RED] =   range_limit[y + Crrtab[cr]];
+      outptr[RGB_GREEN] = range_limit[y +
+			      ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
+						 SCALEBITS))];
+      outptr[RGB_BLUE] =  range_limit[y + Cbbtab[cb]];
+      outptr += RGB_PIXELSIZE;
+    }
+  }
+}
+
+
+/**************** Cases other than YCbCr -> RGB **************/
+
+
+/*
+ * Color conversion for no colorspace change: just copy the data,
+ * converting from separate-planes to interleaved representation.
+ */
+
+METHODDEF(void)
+null_convert (j_decompress_ptr cinfo,
+	      JSAMPIMAGE input_buf, JDIMENSION input_row,
+	      JSAMPARRAY output_buf, int num_rows)
+{
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION count;
+  register int num_components = cinfo->num_components;
+  JDIMENSION num_cols = cinfo->output_width;
+  int ci;
+
+  while (--num_rows >= 0) {
+    for (ci = 0; ci < num_components; ci++) {
+      inptr = input_buf[ci][input_row];
+      outptr = output_buf[0] + ci;
+      for (count = num_cols; count > 0; count--) {
+	*outptr = *inptr++;	/* needn't bother with GETJSAMPLE() here */
+	outptr += num_components;
+      }
+    }
+    input_row++;
+    output_buf++;
+  }
+}
+
+
+/*
+ * Color conversion for grayscale: just copy the data.
+ * This also works for YCbCr -> grayscale conversion, in which
+ * we just copy the Y (luminance) component and ignore chrominance.
+ */
+
+METHODDEF(void)
+grayscale_convert (j_decompress_ptr cinfo,
+		   JSAMPIMAGE input_buf, JDIMENSION input_row,
+		   JSAMPARRAY output_buf, int num_rows)
+{
+  jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0,
+		    num_rows, cinfo->output_width);
+}
+
+
+/*
+ * Convert grayscale to RGB: just duplicate the graylevel three times.
+ * This is provided to support applications that don't want to cope
+ * with grayscale as a separate case.
+ */
+
+METHODDEF(void)
+gray_rgb_convert (j_decompress_ptr cinfo,
+		  JSAMPIMAGE input_buf, JDIMENSION input_row,
+		  JSAMPARRAY output_buf, int num_rows)
+{
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr = input_buf[0][input_row++];
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      /* We can dispense with GETJSAMPLE() here */
+      outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col];
+      outptr += RGB_PIXELSIZE;
+    }
+  }
+}
+
+
+/*
+ * Adobe-style YCCK->CMYK conversion.
+ * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same
+ * conversion as above, while passing K (black) unchanged.
+ * We assume build_ycc_rgb_table has been called.
+ */
+
+METHODDEF(void)
+ycck_cmyk_convert (j_decompress_ptr cinfo,
+		   JSAMPIMAGE input_buf, JDIMENSION input_row,
+		   JSAMPARRAY output_buf, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register int y, cb, cr;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2, inptr3;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+  /* copy these pointers into registers if possible */
+  register JSAMPLE * range_limit = cinfo->sample_range_limit;
+  register int * Crrtab = cconvert->Cr_r_tab;
+  register int * Cbbtab = cconvert->Cb_b_tab;
+  register INT32 * Crgtab = cconvert->Cr_g_tab;
+  register INT32 * Cbgtab = cconvert->Cb_g_tab;
+  SHIFT_TEMPS
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    inptr3 = input_buf[3][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      y  = GETJSAMPLE(inptr0[col]);
+      cb = GETJSAMPLE(inptr1[col]);
+      cr = GETJSAMPLE(inptr2[col]);
+      /* Range-limiting is essential due to noise introduced by DCT losses. */
+      outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])];	/* red */
+      outptr[1] = range_limit[MAXJSAMPLE - (y +			/* green */
+			      ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
+						 SCALEBITS)))];
+      outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])];	/* blue */
+      /* K passes through unchanged */
+      outptr[3] = inptr3[col];	/* don't need GETJSAMPLE here */
+      outptr += 4;
+    }
+  }
+}
+
+
+/*
+ * Empty method for start_pass.
+ */
+
+METHODDEF(void)
+start_pass_dcolor (j_decompress_ptr cinfo)
+{
+  /* no work needed */
+}
+
+
+/*
+ * Module initialization routine for output colorspace conversion.
+ */
+
+GLOBAL(void)
+jinit_color_deconverter (j_decompress_ptr cinfo)
+{
+  my_cconvert_ptr cconvert;
+  int ci;
+
+  cconvert = (my_cconvert_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_color_deconverter));
+  cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert;
+  cconvert->pub.start_pass = start_pass_dcolor;
+
+  /* Make sure num_components agrees with jpeg_color_space */
+  switch (cinfo->jpeg_color_space) {
+  case JCS_GRAYSCALE:
+    if (cinfo->num_components != 1)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    break;
+
+  case JCS_RGB:
+  case JCS_YCbCr:
+    if (cinfo->num_components != 3)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    break;
+
+  case JCS_CMYK:
+  case JCS_YCCK:
+    if (cinfo->num_components != 4)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    break;
+
+  default:			/* JCS_UNKNOWN can be anything */
+    if (cinfo->num_components < 1)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    break;
+  }
+
+  /* Set out_color_components and conversion method based on requested space.
+   * Also clear the component_needed flags for any unused components,
+   * so that earlier pipeline stages can avoid useless computation.
+   */
+
+  switch (cinfo->out_color_space) {
+  case JCS_GRAYSCALE:
+    cinfo->out_color_components = 1;
+    if (cinfo->jpeg_color_space == JCS_GRAYSCALE ||
+	cinfo->jpeg_color_space == JCS_YCbCr) {
+      cconvert->pub.color_convert = grayscale_convert;
+      /* For color->grayscale conversion, only the Y (0) component is needed */
+      for (ci = 1; ci < cinfo->num_components; ci++)
+	cinfo->comp_info[ci].component_needed = FALSE;
+    } else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  case JCS_RGB:
+    cinfo->out_color_components = RGB_PIXELSIZE;
+    if (cinfo->jpeg_color_space == JCS_YCbCr) {
+      cconvert->pub.color_convert = ycc_rgb_convert;
+      build_ycc_rgb_table(cinfo);
+    } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
+      cconvert->pub.color_convert = gray_rgb_convert;
+    } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) {
+      cconvert->pub.color_convert = null_convert;
+    } else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  case JCS_CMYK:
+    cinfo->out_color_components = 4;
+    if (cinfo->jpeg_color_space == JCS_YCCK) {
+      cconvert->pub.color_convert = ycck_cmyk_convert;
+      build_ycc_rgb_table(cinfo);
+    } else if (cinfo->jpeg_color_space == JCS_CMYK) {
+      cconvert->pub.color_convert = null_convert;
+    } else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  default:
+    /* Permit null conversion to same output space */
+    if (cinfo->out_color_space == cinfo->jpeg_color_space) {
+      cinfo->out_color_components = cinfo->num_components;
+      cconvert->pub.color_convert = null_convert;
+    } else			/* unsupported non-null conversion */
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+  }
+
+  if (cinfo->quantize_colors)
+    cinfo->output_components = 1; /* single colormapped output component */
+  else
+    cinfo->output_components = cinfo->out_color_components;
+}

mozilla/jpeg/jdct.h

@@ -0,0 +1,176 @@
+/*
+ * jdct.h
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This include file contains common declarations for the forward and
+ * inverse DCT modules.  These declarations are private to the DCT managers
+ * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms.
+ * The individual DCT algorithms are kept in separate files to ease 
+ * machine-dependent tuning (e.g., assembly coding).
+ */
+
+
+/*
+ * A forward DCT routine is given a pointer to a work area of type DCTELEM[];
+ * the DCT is to be performed in-place in that buffer.  Type DCTELEM is int
+ * for 8-bit samples, INT32 for 12-bit samples.  (NOTE: Floating-point DCT
+ * implementations use an array of type FAST_FLOAT, instead.)
+ * The DCT inputs are expected to be signed (range +-CENTERJSAMPLE).
+ * The DCT outputs are returned scaled up by a factor of 8; they therefore
+ * have a range of +-8K for 8-bit data, +-128K for 12-bit data.  This
+ * convention improves accuracy in integer implementations and saves some
+ * work in floating-point ones.
+ * Quantization of the output coefficients is done by jcdctmgr.c.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+typedef int DCTELEM;		/* 16 or 32 bits is fine */
+#else
+typedef INT32 DCTELEM;		/* must have 32 bits */
+#endif
+
+typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data));
+typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data));
+
+
+/*
+ * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer
+ * to an output sample array.  The routine must dequantize the input data as
+ * well as perform the IDCT; for dequantization, it uses the multiplier table
+ * pointed to by compptr->dct_table.  The output data is to be placed into the
+ * sample array starting at a specified column.  (Any row offset needed will
+ * be applied to the array pointer before it is passed to the IDCT code.)
+ * Note that the number of samples emitted by the IDCT routine is
+ * DCT_scaled_size * DCT_scaled_size.
+ */
+
+/* typedef inverse_DCT_method_ptr is declared in jpegint.h */
+
+/*
+ * Each IDCT routine has its own ideas about the best dct_table element type.
+ */
+
+typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */
+#if BITS_IN_JSAMPLE == 8
+typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */
+#define IFAST_SCALE_BITS  2	/* fractional bits in scale factors */
+#else
+typedef INT32 IFAST_MULT_TYPE;	/* need 32 bits for scaled quantizers */
+#define IFAST_SCALE_BITS  13	/* fractional bits in scale factors */
+#endif
+typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */
+
+
+/*
+ * Each IDCT routine is responsible for range-limiting its results and
+ * converting them to unsigned form (0..MAXJSAMPLE).  The raw outputs could
+ * be quite far out of range if the input data is corrupt, so a bulletproof
+ * range-limiting step is required.  We use a mask-and-table-lookup method
+ * to do the combined operations quickly.  See the comments with
+ * prepare_range_limit_table (in jdmaster.c) for more info.
+ */
+
+#define IDCT_range_limit(cinfo)  ((cinfo)->sample_range_limit + CENTERJSAMPLE)
+
+#define RANGE_MASK  (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */
+
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jpeg_fdct_islow		jFDislow
+#define jpeg_fdct_ifast		jFDifast
+#define jpeg_fdct_float		jFDfloat
+#define jpeg_idct_islow		jRDislow
+#define jpeg_idct_ifast		jRDifast
+#define jpeg_idct_float		jRDfloat
+#define jpeg_idct_4x4		jRD4x4
+#define jpeg_idct_2x2		jRD2x2
+#define jpeg_idct_1x1		jRD1x1
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+/* Extern declarations for the forward and inverse DCT routines. */
+
+EXTERN(void) jpeg_fdct_islow JPP((DCTELEM * data));
+EXTERN(void) jpeg_fdct_ifast JPP((DCTELEM * data));
+EXTERN(void) jpeg_fdct_float JPP((FAST_FLOAT * data));
+
+EXTERN(void) jpeg_idct_islow
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_ifast
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_float
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_4x4
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_2x2
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_1x1
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+
+
+/*
+ * Macros for handling fixed-point arithmetic; these are used by many
+ * but not all of the DCT/IDCT modules.
+ *
+ * All values are expected to be of type INT32.
+ * Fractional constants are scaled left by CONST_BITS bits.
+ * CONST_BITS is defined within each module using these macros,
+ * and may differ from one module to the next.
+ */
+
+#define ONE	((INT32) 1)
+#define CONST_SCALE (ONE << CONST_BITS)
+
+/* Convert a positive real constant to an integer scaled by CONST_SCALE.
+ * Caution: some C compilers fail to reduce "FIX(constant)" at compile time,
+ * thus causing a lot of useless floating-point operations at run time.
+ */
+
+#define FIX(x)	((INT32) ((x) * CONST_SCALE + 0.5))
+
+/* Descale and correctly round an INT32 value that's scaled by N bits.
+ * We assume RIGHT_SHIFT rounds towards minus infinity, so adding
+ * the fudge factor is correct for either sign of X.
+ */
+
+#define DESCALE(x,n)  RIGHT_SHIFT((x) + (ONE << ((n)-1)), n)
+
+/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result.
+ * This macro is used only when the two inputs will actually be no more than
+ * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a
+ * full 32x32 multiply.  This provides a useful speedup on many machines.
+ * Unfortunately there is no way to specify a 16x16->32 multiply portably
+ * in C, but some C compilers will do the right thing if you provide the
+ * correct combination of casts.
+ */
+
+#ifdef SHORTxSHORT_32		/* may work if 'int' is 32 bits */
+#define MULTIPLY16C16(var,const)  (((INT16) (var)) * ((INT16) (const)))
+#endif
+#ifdef SHORTxLCONST_32		/* known to work with Microsoft C 6.0 */
+#define MULTIPLY16C16(var,const)  (((INT16) (var)) * ((INT32) (const)))
+#endif
+
+#ifndef MULTIPLY16C16		/* default definition */
+#define MULTIPLY16C16(var,const)  ((var) * (const))
+#endif
+
+/* Same except both inputs are variables. */
+
+#ifdef SHORTxSHORT_32		/* may work if 'int' is 32 bits */
+#define MULTIPLY16V16(var1,var2)  (((INT16) (var1)) * ((INT16) (var2)))
+#endif
+
+#ifndef MULTIPLY16V16		/* default definition */
+#define MULTIPLY16V16(var1,var2)  ((var1) * (var2))
+#endif

mozilla/jpeg/jddctmgr.c

@@ -0,0 +1,269 @@
+/*
+ * jddctmgr.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the inverse-DCT management logic.
+ * This code selects a particular IDCT implementation to be used,
+ * and it performs related housekeeping chores.  No code in this file
+ * is executed per IDCT step, only during output pass setup.
+ *
+ * Note that the IDCT routines are responsible for performing coefficient
+ * dequantization as well as the IDCT proper.  This module sets up the
+ * dequantization multiplier table needed by the IDCT routine.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+
+/*
+ * The decompressor input side (jdinput.c) saves away the appropriate
+ * quantization table for each component at the start of the first scan
+ * involving that component.  (This is necessary in order to correctly
+ * decode files that reuse Q-table slots.)
+ * When we are ready to make an output pass, the saved Q-table is converted
+ * to a multiplier table that will actually be used by the IDCT routine.
+ * The multiplier table contents are IDCT-method-dependent.  To support
+ * application changes in IDCT method between scans, we can remake the
+ * multiplier tables if necessary.
+ * In buffered-image mode, the first output pass may occur before any data
+ * has been seen for some components, and thus before their Q-tables have
+ * been saved away.  To handle this case, multiplier tables are preset
+ * to zeroes; the result of the IDCT will be a neutral gray level.
+ */
+
+
+/* Private subobject for this module */
+
+typedef struct {
+  struct jpeg_inverse_dct pub;	/* public fields */
+
+  /* This array contains the IDCT method code that each multiplier table
+   * is currently set up for, or -1 if it's not yet set up.
+   * The actual multiplier tables are pointed to by dct_table in the
+   * per-component comp_info structures.
+   */
+  int cur_method[MAX_COMPONENTS];
+} my_idct_controller;
+
+typedef my_idct_controller * my_idct_ptr;
+
+
+/* Allocated multiplier tables: big enough for any supported variant */
+
+typedef union {
+  ISLOW_MULT_TYPE islow_array[DCTSIZE2];
+#ifdef DCT_IFAST_SUPPORTED
+  IFAST_MULT_TYPE ifast_array[DCTSIZE2];
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  FLOAT_MULT_TYPE float_array[DCTSIZE2];
+#endif
+} multiplier_table;
+
+
+/* The current scaled-IDCT routines require ISLOW-style multiplier tables,
+ * so be sure to compile that code if either ISLOW or SCALING is requested.
+ */
+#ifdef DCT_ISLOW_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#else
+#ifdef IDCT_SCALING_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#endif
+#endif
+
+
+/*
+ * Prepare for an output pass.
+ * Here we select the proper IDCT routine for each component and build
+ * a matching multiplier table.
+ */
+
+METHODDEF(void)
+start_pass (j_decompress_ptr cinfo)
+{
+  my_idct_ptr idct = (my_idct_ptr) cinfo->idct;
+  int ci, i;
+  jpeg_component_info *compptr;
+  int method = 0;
+  inverse_DCT_method_ptr method_ptr = NULL;
+  JQUANT_TBL * qtbl;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Select the proper IDCT routine for this component's scaling */
+    switch (compptr->DCT_scaled_size) {
+#ifdef IDCT_SCALING_SUPPORTED
+    case 1:
+      method_ptr = jpeg_idct_1x1;
+      method = JDCT_ISLOW;	/* jidctred uses islow-style table */
+      break;
+    case 2:
+      method_ptr = jpeg_idct_2x2;
+      method = JDCT_ISLOW;	/* jidctred uses islow-style table */
+      break;
+    case 4:
+      method_ptr = jpeg_idct_4x4;
+      method = JDCT_ISLOW;	/* jidctred uses islow-style table */
+      break;
+#endif
+    case DCTSIZE:
+      switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+      case JDCT_ISLOW:
+	method_ptr = jpeg_idct_islow;
+	method = JDCT_ISLOW;
+	break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+      case JDCT_IFAST:
+	method_ptr = jpeg_idct_ifast;
+	method = JDCT_IFAST;
+	break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+      case JDCT_FLOAT:
+	method_ptr = jpeg_idct_float;
+	method = JDCT_FLOAT;
+	break;
+#endif
+      default:
+	ERREXIT(cinfo, JERR_NOT_COMPILED);
+	break;
+      }
+      break;
+    default:
+      ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size);
+      break;
+    }
+    idct->pub.inverse_DCT[ci] = method_ptr;
+    /* Create multiplier table from quant table.
+     * However, we can skip this if the component is uninteresting
+     * or if we already built the table.  Also, if no quant table
+     * has yet been saved for the component, we leave the
+     * multiplier table all-zero; we'll be reading zeroes from the
+     * coefficient controller's buffer anyway.
+     */
+    if (! compptr->component_needed || idct->cur_method[ci] == method)
+      continue;
+    qtbl = compptr->quant_table;
+    if (qtbl == NULL)		/* happens if no data yet for component */
+      continue;
+    idct->cur_method[ci] = method;
+    switch (method) {
+#ifdef PROVIDE_ISLOW_TABLES
+    case JDCT_ISLOW:
+      {
+	/* For LL&M IDCT method, multipliers are equal to raw quantization
+	 * coefficients, but are stored as ints to ensure access efficiency.
+	 */
+	ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table;
+	for (i = 0; i < DCTSIZE2; i++) {
+	  ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i];
+	}
+      }
+      break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+    case JDCT_IFAST:
+      {
+	/* For AA&N IDCT method, multipliers are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * For integer operation, the multiplier table is to be scaled by
+	 * IFAST_SCALE_BITS.
+	 */
+	IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table;
+#define CONST_BITS 14
+	static const INT16 aanscales[DCTSIZE2] = {
+	  /* precomputed values scaled up by 14 bits */
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
+	  21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
+	  19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
+	   8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
+	   4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
+	};
+	SHIFT_TEMPS
+
+	for (i = 0; i < DCTSIZE2; i++) {
+	  ifmtbl[i] = (IFAST_MULT_TYPE)
+	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
+				  (INT32) aanscales[i]),
+		    CONST_BITS-IFAST_SCALE_BITS);
+	}
+      }
+      break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+    case JDCT_FLOAT:
+      {
+	/* For float AA&N IDCT method, multipliers are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 */
+	FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table;
+	int row, col;
+	static const double aanscalefactor[DCTSIZE] = {
+	  1.0, 1.387039845, 1.306562965, 1.175875602,
+	  1.0, 0.785694958, 0.541196100, 0.275899379
+	};
+
+	i = 0;
+	for (row = 0; row < DCTSIZE; row++) {
+	  for (col = 0; col < DCTSIZE; col++) {
+	    fmtbl[i] = (FLOAT_MULT_TYPE)
+	      ((double) qtbl->quantval[i] *
+	       aanscalefactor[row] * aanscalefactor[col]);
+	    i++;
+	  }
+	}
+      }
+      break;
+#endif
+    default:
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+      break;
+    }
+  }
+}
+
+
+/*
+ * Initialize IDCT manager.
+ */
+
+GLOBAL(void)
+jinit_inverse_dct (j_decompress_ptr cinfo)
+{
+  my_idct_ptr idct;
+  int ci;
+  jpeg_component_info *compptr;
+
+  idct = (my_idct_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_idct_controller));
+  cinfo->idct = (struct jpeg_inverse_dct *) idct;
+  idct->pub.start_pass = start_pass;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Allocate and pre-zero a multiplier table for each component */
+    compptr->dct_table =
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(multiplier_table));
+    MEMZERO(compptr->dct_table, SIZEOF(multiplier_table));
+    /* Mark multiplier table not yet set up for any method */
+    idct->cur_method[ci] = -1;
+  }
+}

mozilla/jpeg/jdhuff.c

@@ -0,0 +1,651 @@
+/*
+ * jdhuff.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains Huffman entropy decoding routines.
+ *
+ * Much of the complexity here has to do with supporting input suspension.
+ * If the data source module demands suspension, we want to be able to back
+ * up to the start of the current MCU.  To do this, we copy state variables
+ * into local working storage, and update them back to the permanent
+ * storage only upon successful completion of an MCU.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdhuff.h"		/* Declarations shared with jdphuff.c */
+
+
+/*
+ * Expanded entropy decoder object for Huffman decoding.
+ *
+ * The savable_state subrecord contains fields that change within an MCU,
+ * but must not be updated permanently until we complete the MCU.
+ */
+
+typedef struct {
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+} savable_state;
+
+/* This macro is to work around compilers with missing or broken
+ * structure assignment.  You'll need to fix this code if you have
+ * such a compiler and you change MAX_COMPS_IN_SCAN.
+ */
+
+#ifndef NO_STRUCT_ASSIGN
+#define ASSIGN_STATE(dest,src)  ((dest) = (src))
+#else
+#if MAX_COMPS_IN_SCAN == 4
+#define ASSIGN_STATE(dest,src)  \
+	((dest).last_dc_val[0] = (src).last_dc_val[0], \
+	 (dest).last_dc_val[1] = (src).last_dc_val[1], \
+	 (dest).last_dc_val[2] = (src).last_dc_val[2], \
+	 (dest).last_dc_val[3] = (src).last_dc_val[3])
+#endif
+#endif
+
+
+typedef struct {
+  struct jpeg_entropy_decoder pub; /* public fields */
+
+  /* These fields are loaded into local variables at start of each MCU.
+   * In case of suspension, we exit WITHOUT updating them.
+   */
+  bitread_perm_state bitstate;	/* Bit buffer at start of MCU */
+  savable_state saved;		/* Other state at start of MCU */
+
+  /* These fields are NOT loaded into local working state. */
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+
+  /* Pointers to derived tables (these workspaces have image lifespan) */
+  d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS];
+  d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS];
+
+  /* Precalculated info set up by start_pass for use in decode_mcu: */
+
+  /* Pointers to derived tables to be used for each block within an MCU */
+  d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU];
+  d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU];
+  /* Whether we care about the DC and AC coefficient values for each block */
+  boolean dc_needed[D_MAX_BLOCKS_IN_MCU];
+  boolean ac_needed[D_MAX_BLOCKS_IN_MCU];
+} huff_entropy_decoder;
+
+typedef huff_entropy_decoder * huff_entropy_ptr;
+
+
+/*
+ * Initialize for a Huffman-compressed scan.
+ */
+
+METHODDEF(void)
+start_pass_huff_decoder (j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int ci, blkn, dctbl, actbl;
+  jpeg_component_info * compptr;
+
+  /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG.
+   * This ought to be an error condition, but we make it a warning because
+   * there are some baseline files out there with all zeroes in these bytes.
+   */
+  if (cinfo->Ss != 0 || cinfo->Se != DCTSIZE2-1 ||
+      cinfo->Ah != 0 || cinfo->Al != 0)
+    WARNMS(cinfo, JWRN_NOT_SEQUENTIAL);
+
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    dctbl = compptr->dc_tbl_no;
+    actbl = compptr->ac_tbl_no;
+    /* Compute derived values for Huffman tables */
+    /* We may do this more than once for a table, but it's not expensive */
+    jpeg_make_d_derived_tbl(cinfo, TRUE, dctbl,
+			    & entropy->dc_derived_tbls[dctbl]);
+    jpeg_make_d_derived_tbl(cinfo, FALSE, actbl,
+			    & entropy->ac_derived_tbls[actbl]);
+    /* Initialize DC predictions to 0 */
+    entropy->saved.last_dc_val[ci] = 0;
+  }
+
+  /* Precalculate decoding info for each block in an MCU of this scan */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+    /* Precalculate which table to use for each block */
+    entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no];
+    entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no];
+    /* Decide whether we really care about the coefficient values */
+    if (compptr->component_needed) {
+      entropy->dc_needed[blkn] = TRUE;
+      /* we don't need the ACs if producing a 1/8th-size image */
+      entropy->ac_needed[blkn] = (compptr->DCT_scaled_size > 1);
+    } else {
+      entropy->dc_needed[blkn] = entropy->ac_needed[blkn] = FALSE;
+    }
+  }
+
+  /* Initialize bitread state variables */
+  entropy->bitstate.bits_left = 0;
+  entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
+  entropy->pub.insufficient_data = FALSE;
+
+  /* Initialize restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+}
+
+
+/*
+ * Compute the derived values for a Huffman table.
+ * This routine also performs some validation checks on the table.
+ *
+ * Note this is also used by jdphuff.c.
+ */
+
+GLOBAL(void)
+jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno,
+			 d_derived_tbl ** pdtbl)
+{
+  JHUFF_TBL *htbl;
+  d_derived_tbl *dtbl;
+  int p, i, l, si, numsymbols;
+  int lookbits, ctr;
+  char huffsize[257];
+  unsigned int huffcode[257];
+  unsigned int code;
+
+  /* Note that huffsize[] and huffcode[] are filled in code-length order,
+   * paralleling the order of the symbols themselves in htbl->huffval[].
+   */
+
+  /* Find the input Huffman table */
+  if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+  htbl =
+    isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
+  if (htbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+
+  /* Allocate a workspace if we haven't already done so. */
+  if (*pdtbl == NULL)
+    *pdtbl = (d_derived_tbl *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(d_derived_tbl));
+  dtbl = *pdtbl;
+  dtbl->pub = htbl;		/* fill in back link */
+  
+  /* Figure C.1: make table of Huffman code length for each symbol */
+
+  p = 0;
+  for (l = 1; l <= 16; l++) {
+    i = (int) htbl->bits[l];
+    if (i < 0 || p + i > 256)	/* protect against table overrun */
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    while (i--)
+      huffsize[p++] = (char) l;
+  }
+  huffsize[p] = 0;
+  numsymbols = p;
+  
+  /* Figure C.2: generate the codes themselves */
+  /* We also validate that the counts represent a legal Huffman code tree. */
+  
+  code = 0;
+  si = huffsize[0];
+  p = 0;
+  while (huffsize[p]) {
+    while (((int) huffsize[p]) == si) {
+      huffcode[p++] = code;
+      code++;
+    }
+    /* code is now 1 more than the last code used for codelength si; but
+     * it must still fit in si bits, since no code is allowed to be all ones.
+     */
+    if (((INT32) code) >= (((INT32) 1) << si))
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    code <<= 1;
+    si++;
+  }
+
+  /* Figure F.15: generate decoding tables for bit-sequential decoding */
+
+  p = 0;
+  for (l = 1; l <= 16; l++) {
+    if (htbl->bits[l]) {
+      /* valoffset[l] = huffval[] index of 1st symbol of code length l,
+       * minus the minimum code of length l
+       */
+      dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p];
+      p += htbl->bits[l];
+      dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */
+    } else {
+      dtbl->maxcode[l] = -1;	/* -1 if no codes of this length */
+    }
+  }
+  dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */
+
+  /* Compute lookahead tables to speed up decoding.
+   * First we set all the table entries to 0, indicating "too long";
+   * then we iterate through the Huffman codes that are short enough and
+   * fill in all the entries that correspond to bit sequences starting
+   * with that code.
+   */
+
+  MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits));
+
+  p = 0;
+  for (l = 1; l <= HUFF_LOOKAHEAD; l++) {
+    for (i = 1; i <= (int) htbl->bits[l]; i++, p++) {
+      /* l = current code's length, p = its index in huffcode[] & huffval[]. */
+      /* Generate left-justified code followed by all possible bit sequences */
+      lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l);
+      for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) {
+	dtbl->look_nbits[lookbits] = l;
+	dtbl->look_sym[lookbits] = htbl->huffval[p];
+	lookbits++;
+      }
+    }
+  }
+
+  /* Validate symbols as being reasonable.
+   * For AC tables, we make no check, but accept all byte values 0..255.
+   * For DC tables, we require the symbols to be in range 0..15.
+   * (Tighter bounds could be applied depending on the data depth and mode,
+   * but this is sufficient to ensure safe decoding.)
+   */
+  if (isDC) {
+    for (i = 0; i < numsymbols; i++) {
+      int sym = htbl->huffval[i];
+      if (sym < 0 || sym > 15)
+	ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    }
+  }
+}
+
+
+/*
+ * Out-of-line code for bit fetching (shared with jdphuff.c).
+ * See jdhuff.h for info about usage.
+ * Note: current values of get_buffer and bits_left are passed as parameters,
+ * but are returned in the corresponding fields of the state struct.
+ *
+ * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width
+ * of get_buffer to be used.  (On machines with wider words, an even larger
+ * buffer could be used.)  However, on some machines 32-bit shifts are
+ * quite slow and take time proportional to the number of places shifted.
+ * (This is true with most PC compilers, for instance.)  In this case it may
+ * be a win to set MIN_GET_BITS to the minimum value of 15.  This reduces the
+ * average shift distance at the cost of more calls to jpeg_fill_bit_buffer.
+ */
+
+#ifdef SLOW_SHIFT_32
+#define MIN_GET_BITS  15	/* minimum allowable value */
+#else
+#define MIN_GET_BITS  (BIT_BUF_SIZE-7)
+#endif
+
+
+GLOBAL(boolean)
+jpeg_fill_bit_buffer (bitread_working_state * state,
+		      register bit_buf_type get_buffer, register int bits_left,
+		      int nbits)
+/* Load up the bit buffer to a depth of at least nbits */
+{
+  /* Copy heavily used state fields into locals (hopefully registers) */
+  register const JOCTET * next_input_byte = state->next_input_byte;
+  register size_t bytes_in_buffer = state->bytes_in_buffer;
+  j_decompress_ptr cinfo = state->cinfo;
+
+  /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */
+  /* (It is assumed that no request will be for more than that many bits.) */
+  /* We fail to do so only if we hit a marker or are forced to suspend. */
+
+  if (cinfo->unread_marker == 0) {	/* cannot advance past a marker */
+    while (bits_left < MIN_GET_BITS) {
+      register int c;
+
+      /* Attempt to read a byte */
+      if (bytes_in_buffer == 0) {
+	if (! (*cinfo->src->fill_input_buffer) (cinfo))
+	  return FALSE;
+	next_input_byte = cinfo->src->next_input_byte;
+	bytes_in_buffer = cinfo->src->bytes_in_buffer;
+      }
+      bytes_in_buffer--;
+      c = GETJOCTET(*next_input_byte++);
+
+      /* If it's 0xFF, check and discard stuffed zero byte */
+      if (c == 0xFF) {
+	/* Loop here to discard any padding FF's on terminating marker,
+	 * so that we can save a valid unread_marker value.  NOTE: we will
+	 * accept multiple FF's followed by a 0 as meaning a single FF data
+	 * byte.  This data pattern is not valid according to the standard.
+	 */
+	do {
+	  if (bytes_in_buffer == 0) {
+	    if (! (*cinfo->src->fill_input_buffer) (cinfo))
+	      return FALSE;
+	    next_input_byte = cinfo->src->next_input_byte;
+	    bytes_in_buffer = cinfo->src->bytes_in_buffer;
+	  }
+	  bytes_in_buffer--;
+	  c = GETJOCTET(*next_input_byte++);
+	} while (c == 0xFF);
+
+	if (c == 0) {
+	  /* Found FF/00, which represents an FF data byte */
+	  c = 0xFF;
+	} else {
+	  /* Oops, it's actually a marker indicating end of compressed data.
+	   * Save the marker code for later use.
+	   * Fine point: it might appear that we should save the marker into
+	   * bitread working state, not straight into permanent state.  But
+	   * once we have hit a marker, we cannot need to suspend within the
+	   * current MCU, because we will read no more bytes from the data
+	   * source.  So it is OK to update permanent state right away.
+	   */
+	  cinfo->unread_marker = c;
+	  /* See if we need to insert some fake zero bits. */
+	  goto no_more_bytes;
+	}
+      }
+
+      /* OK, load c into get_buffer */
+      get_buffer = (get_buffer << 8) | c;
+      bits_left += 8;
+    } /* end while */
+  } else {
+  no_more_bytes:
+    /* We get here if we've read the marker that terminates the compressed
+     * data segment.  There should be enough bits in the buffer register
+     * to satisfy the request; if so, no problem.
+     */
+    if (nbits > bits_left) {
+      /* Uh-oh.  Report corrupted data to user and stuff zeroes into
+       * the data stream, so that we can produce some kind of image.
+       * We use a nonvolatile flag to ensure that only one warning message
+       * appears per data segment.
+       */
+      if (! cinfo->entropy->insufficient_data) {
+	WARNMS(cinfo, JWRN_HIT_MARKER);
+	cinfo->entropy->insufficient_data = TRUE;
+      }
+      /* Fill the buffer with zero bits */
+      get_buffer <<= MIN_GET_BITS - bits_left;
+      bits_left = MIN_GET_BITS;
+    }
+  }
+
+  /* Unload the local registers */
+  state->next_input_byte = next_input_byte;
+  state->bytes_in_buffer = bytes_in_buffer;
+  state->get_buffer = get_buffer;
+  state->bits_left = bits_left;
+
+  return TRUE;
+}
+
+
+/*
+ * Out-of-line code for Huffman code decoding.
+ * See jdhuff.h for info about usage.
+ */
+
+GLOBAL(int)
+jpeg_huff_decode (bitread_working_state * state,
+		  register bit_buf_type get_buffer, register int bits_left,
+		  d_derived_tbl * htbl, int min_bits)
+{
+  register int l = min_bits;
+  register INT32 code;
+
+  /* HUFF_DECODE has determined that the code is at least min_bits */
+  /* bits long, so fetch that many bits in one swoop. */
+
+  CHECK_BIT_BUFFER(*state, l, return -1);
+  code = GET_BITS(l);
+
+  /* Collect the rest of the Huffman code one bit at a time. */
+  /* This is per Figure F.16 in the JPEG spec. */
+
+  while (code > htbl->maxcode[l]) {
+    code <<= 1;
+    CHECK_BIT_BUFFER(*state, 1, return -1);
+    code |= GET_BITS(1);
+    l++;
+  }
+
+  /* Unload the local registers */
+  state->get_buffer = get_buffer;
+  state->bits_left = bits_left;
+
+  /* With garbage input we may reach the sentinel value l = 17. */
+
+  if (l > 16) {
+    WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE);
+    return 0;			/* fake a zero as the safest result */
+  }
+
+  return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ];
+}
+
+
+/*
+ * Figure F.12: extend sign bit.
+ * On some machines, a shift and add will be faster than a table lookup.
+ */
+
+#ifdef AVOID_TABLES
+
+#define HUFF_EXTEND(x,s)  ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x))
+
+#else
+
+#define HUFF_EXTEND(x,s)  ((x) < extend_test[s] ? (x) + extend_offset[s] : (x))
+
+static const int extend_test[16] =   /* entry n is 2**(n-1) */
+  { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
+    0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 };
+
+static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */
+  { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1,
+    ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1,
+    ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1,
+    ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 };
+
+#endif /* AVOID_TABLES */
+
+
+/*
+ * Check for a restart marker & resynchronize decoder.
+ * Returns FALSE if must suspend.
+ */
+
+LOCAL(boolean)
+process_restart (j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int ci;
+
+  /* Throw away any unused bits remaining in bit buffer; */
+  /* include any full bytes in next_marker's count of discarded bytes */
+  cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
+  entropy->bitstate.bits_left = 0;
+
+  /* Advance past the RSTn marker */
+  if (! (*cinfo->marker->read_restart_marker) (cinfo))
+    return FALSE;
+
+  /* Re-initialize DC predictions to 0 */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++)
+    entropy->saved.last_dc_val[ci] = 0;
+
+  /* Reset restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+
+  /* Reset out-of-data flag, unless read_restart_marker left us smack up
+   * against a marker.  In that case we will end up treating the next data
+   * segment as empty, and we can avoid producing bogus output pixels by
+   * leaving the flag set.
+   */
+  if (cinfo->unread_marker == 0)
+    entropy->pub.insufficient_data = FALSE;
+
+  return TRUE;
+}
+
+
+/*
+ * Decode and return one MCU's worth of Huffman-compressed coefficients.
+ * The coefficients are reordered from zigzag order into natural array order,
+ * but are not dequantized.
+ *
+ * The i'th block of the MCU is stored into the block pointed to by
+ * MCU_data[i].  WE ASSUME THIS AREA HAS BEEN ZEROED BY THE CALLER.
+ * (Wholesale zeroing is usually a little faster than retail...)
+ *
+ * Returns FALSE if data source requested suspension.  In that case no
+ * changes have been made to permanent state.  (Exception: some output
+ * coefficients may already have been assigned.  This is harmless for
+ * this module, since we'll just re-assign them on the next call.)
+ */
+
+METHODDEF(boolean)
+decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int blkn;
+  BITREAD_STATE_VARS;
+  savable_state state;
+
+  /* Process restart marker if needed; may have to suspend */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (! process_restart(cinfo))
+	return FALSE;
+  }
+
+  /* If we've run out of data, just leave the MCU set to zeroes.
+   * This way, we return uniform gray for the remainder of the segment.
+   */
+  if (! entropy->pub.insufficient_data) {
+
+    /* Load up working state */
+    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(state, entropy->saved);
+
+    /* Outer loop handles each block in the MCU */
+
+    for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+      JBLOCKROW block = MCU_data[blkn];
+      d_derived_tbl * dctbl = entropy->dc_cur_tbls[blkn];
+      d_derived_tbl * actbl = entropy->ac_cur_tbls[blkn];
+      register int s, k, r;
+
+      /* Decode a single block's worth of coefficients */
+
+      /* Section F.2.2.1: decode the DC coefficient difference */
+      HUFF_DECODE(s, br_state, dctbl, return FALSE, label1);
+      if (s) {
+	CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	r = GET_BITS(s);
+	s = HUFF_EXTEND(r, s);
+      }
+
+      if (entropy->dc_needed[blkn]) {
+	/* Convert DC difference to actual value, update last_dc_val */
+	int ci = cinfo->MCU_membership[blkn];
+	s += state.last_dc_val[ci];
+	state.last_dc_val[ci] = s;
+	/* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */
+	(*block)[0] = (JCOEF) s;
+      }
+
+      if (entropy->ac_needed[blkn]) {
+
+	/* Section F.2.2.2: decode the AC coefficients */
+	/* Since zeroes are skipped, output area must be cleared beforehand */
+	for (k = 1; k < DCTSIZE2; k++) {
+	  HUFF_DECODE(s, br_state, actbl, return FALSE, label2);
+      
+	  r = s >> 4;
+	  s &= 15;
+      
+	  if (s) {
+	    k += r;
+	    CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	    r = GET_BITS(s);
+	    s = HUFF_EXTEND(r, s);
+	    /* Output coefficient in natural (dezigzagged) order.
+	     * Note: the extra entries in jpeg_natural_order[] will save us
+	     * if k >= DCTSIZE2, which could happen if the data is corrupted.
+	     */
+	    (*block)[jpeg_natural_order[k]] = (JCOEF) s;
+	  } else {
+	    if (r != 15)
+	      break;
+	    k += 15;
+	  }
+	}
+
+      } else {
+
+	/* Section F.2.2.2: decode the AC coefficients */
+	/* In this path we just discard the values */
+	for (k = 1; k < DCTSIZE2; k++) {
+	  HUFF_DECODE(s, br_state, actbl, return FALSE, label3);
+      
+	  r = s >> 4;
+	  s &= 15;
+      
+	  if (s) {
+	    k += r;
+	    CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	    DROP_BITS(s);
+	  } else {
+	    if (r != 15)
+	      break;
+	    k += 15;
+	  }
+	}
+
+      }
+    }
+
+    /* Completed MCU, so update state */
+    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(entropy->saved, state);
+  }
+
+  /* Account for restart interval (no-op if not using restarts) */
+  entropy->restarts_to_go--;
+
+  return TRUE;
+}
+
+
+/*
+ * Module initialization routine for Huffman entropy decoding.
+ */
+
+GLOBAL(void)
+jinit_huff_decoder (j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy;
+  int i;
+
+  entropy = (huff_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(huff_entropy_decoder));
+  cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
+  entropy->pub.start_pass = start_pass_huff_decoder;
+  entropy->pub.decode_mcu = decode_mcu;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL;
+  }
+}

mozilla/jpeg/jdhuff.h

@@ -0,0 +1,201 @@
+/*
+ * jdhuff.h
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains declarations for Huffman entropy decoding routines
+ * that are shared between the sequential decoder (jdhuff.c) and the
+ * progressive decoder (jdphuff.c).  No other modules need to see these.
+ */
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jpeg_make_d_derived_tbl	jMkDDerived
+#define jpeg_fill_bit_buffer	jFilBitBuf
+#define jpeg_huff_decode	jHufDecode
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+
+/* Derived data constructed for each Huffman table */
+
+#define HUFF_LOOKAHEAD	8	/* # of bits of lookahead */
+
+typedef struct {
+  /* Basic tables: (element [0] of each array is unused) */
+  INT32 maxcode[18];		/* largest code of length k (-1 if none) */
+  /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */
+  INT32 valoffset[17];		/* huffval[] offset for codes of length k */
+  /* valoffset[k] = huffval[] index of 1st symbol of code length k, less
+   * the smallest code of length k; so given a code of length k, the
+   * corresponding symbol is huffval[code + valoffset[k]]
+   */
+
+  /* Link to public Huffman table (needed only in jpeg_huff_decode) */
+  JHUFF_TBL *pub;
+
+  /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of
+   * the input data stream.  If the next Huffman code is no more
+   * than HUFF_LOOKAHEAD bits long, we can obtain its length and
+   * the corresponding symbol directly from these tables.
+   */
+  int look_nbits[1<<HUFF_LOOKAHEAD]; /* # bits, or 0 if too long */
+  UINT8 look_sym[1<<HUFF_LOOKAHEAD]; /* symbol, or unused */
+} d_derived_tbl;
+
+/* Expand a Huffman table definition into the derived format */
+EXTERN(void) jpeg_make_d_derived_tbl
+	JPP((j_decompress_ptr cinfo, boolean isDC, int tblno,
+	     d_derived_tbl ** pdtbl));
+
+
+/*
+ * Fetching the next N bits from the input stream is a time-critical operation
+ * for the Huffman decoders.  We implement it with a combination of inline
+ * macros and out-of-line subroutines.  Note that N (the number of bits
+ * demanded at one time) never exceeds 15 for JPEG use.
+ *
+ * We read source bytes into get_buffer and dole out bits as needed.
+ * If get_buffer already contains enough bits, they are fetched in-line
+ * by the macros CHECK_BIT_BUFFER and GET_BITS.  When there aren't enough
+ * bits, jpeg_fill_bit_buffer is called; it will attempt to fill get_buffer
+ * as full as possible (not just to the number of bits needed; this
+ * prefetching reduces the overhead cost of calling jpeg_fill_bit_buffer).
+ * Note that jpeg_fill_bit_buffer may return FALSE to indicate suspension.
+ * On TRUE return, jpeg_fill_bit_buffer guarantees that get_buffer contains
+ * at least the requested number of bits --- dummy zeroes are inserted if
+ * necessary.
+ */
+
+typedef INT32 bit_buf_type;	/* type of bit-extraction buffer */
+#define BIT_BUF_SIZE  32	/* size of buffer in bits */
+
+/* If long is > 32 bits on your machine, and shifting/masking longs is
+ * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE
+ * appropriately should be a win.  Unfortunately we can't define the size
+ * with something like  #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8)
+ * because not all machines measure sizeof in 8-bit bytes.
+ */
+
+typedef struct {		/* Bitreading state saved across MCUs */
+  bit_buf_type get_buffer;	/* current bit-extraction buffer */
+  int bits_left;		/* # of unused bits in it */
+} bitread_perm_state;
+
+typedef struct {		/* Bitreading working state within an MCU */
+  /* Current data source location */
+  /* We need a copy, rather than munging the original, in case of suspension */
+  const JOCTET * next_input_byte; /* => next byte to read from source */
+  size_t bytes_in_buffer;	/* # of bytes remaining in source buffer */
+  /* Bit input buffer --- note these values are kept in register variables,
+   * not in this struct, inside the inner loops.
+   */
+  bit_buf_type get_buffer;	/* current bit-extraction buffer */
+  int bits_left;		/* # of unused bits in it */
+  /* Pointer needed by jpeg_fill_bit_buffer. */
+  j_decompress_ptr cinfo;	/* back link to decompress master record */
+} bitread_working_state;
+
+/* Macros to declare and load/save bitread local variables. */
+#define BITREAD_STATE_VARS  \
+	register bit_buf_type get_buffer;  \
+	register int bits_left;  \
+	bitread_working_state br_state
+
+#define BITREAD_LOAD_STATE(cinfop,permstate)  \
+	br_state.cinfo = cinfop; \
+	br_state.next_input_byte = cinfop->src->next_input_byte; \
+	br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \
+	get_buffer = permstate.get_buffer; \
+	bits_left = permstate.bits_left;
+
+#define BITREAD_SAVE_STATE(cinfop,permstate)  \
+	cinfop->src->next_input_byte = br_state.next_input_byte; \
+	cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \
+	permstate.get_buffer = get_buffer; \
+	permstate.bits_left = bits_left
+
+/*
+ * These macros provide the in-line portion of bit fetching.
+ * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer
+ * before using GET_BITS, PEEK_BITS, or DROP_BITS.
+ * The variables get_buffer and bits_left are assumed to be locals,
+ * but the state struct might not be (jpeg_huff_decode needs this).
+ *	CHECK_BIT_BUFFER(state,n,action);
+ *		Ensure there are N bits in get_buffer; if suspend, take action.
+ *      val = GET_BITS(n);
+ *		Fetch next N bits.
+ *      val = PEEK_BITS(n);
+ *		Fetch next N bits without removing them from the buffer.
+ *	DROP_BITS(n);
+ *		Discard next N bits.
+ * The value N should be a simple variable, not an expression, because it
+ * is evaluated multiple times.
+ */
+
+#define CHECK_BIT_BUFFER(state,nbits,action) \
+	{ if (bits_left < (nbits)) {  \
+	    if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits))  \
+	      { action; }  \
+	    get_buffer = (state).get_buffer; bits_left = (state).bits_left; } }
+
+#define GET_BITS(nbits) \
+	(((int) (get_buffer >> (bits_left -= (nbits)))) & ((1<<(nbits))-1))
+
+#define PEEK_BITS(nbits) \
+	(((int) (get_buffer >> (bits_left -  (nbits)))) & ((1<<(nbits))-1))
+
+#define DROP_BITS(nbits) \
+	(bits_left -= (nbits))
+
+/* Load up the bit buffer to a depth of at least nbits */
+EXTERN(boolean) jpeg_fill_bit_buffer
+	JPP((bitread_working_state * state, register bit_buf_type get_buffer,
+	     register int bits_left, int nbits));
+
+
+/*
+ * Code for extracting next Huffman-coded symbol from input bit stream.
+ * Again, this is time-critical and we make the main paths be macros.
+ *
+ * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits
+ * without looping.  Usually, more than 95% of the Huffman codes will be 8
+ * or fewer bits long.  The few overlength codes are handled with a loop,
+ * which need not be inline code.
+ *
+ * Notes about the HUFF_DECODE macro:
+ * 1. Near the end of the data segment, we may fail to get enough bits
+ *    for a lookahead.  In that case, we do it the hard way.
+ * 2. If the lookahead table contains no entry, the next code must be
+ *    more than HUFF_LOOKAHEAD bits long.
+ * 3. jpeg_huff_decode returns -1 if forced to suspend.
+ */
+
+#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \
+{ register int nb, look; \
+  if (bits_left < HUFF_LOOKAHEAD) { \
+    if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \
+    get_buffer = state.get_buffer; bits_left = state.bits_left; \
+    if (bits_left < HUFF_LOOKAHEAD) { \
+      nb = 1; goto slowlabel; \
+    } \
+  } \
+  look = PEEK_BITS(HUFF_LOOKAHEAD); \
+  if ((nb = htbl->look_nbits[look]) != 0) { \
+    DROP_BITS(nb); \
+    result = htbl->look_sym[look]; \
+  } else { \
+    nb = HUFF_LOOKAHEAD+1; \
+slowlabel: \
+    if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \
+	{ failaction; } \
+    get_buffer = state.get_buffer; bits_left = state.bits_left; \
+  } \
+}
+
+/* Out-of-line case for Huffman code fetching */
+EXTERN(int) jpeg_huff_decode
+	JPP((bitread_working_state * state, register bit_buf_type get_buffer,
+	     register int bits_left, d_derived_tbl * htbl, int min_bits));

mozilla/jpeg/jdinput.c

@@ -0,0 +1,381 @@
+/*
+ * jdinput.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains input control logic for the JPEG decompressor.
+ * These routines are concerned with controlling the decompressor's input
+ * processing (marker reading and coefficient decoding).  The actual input
+ * reading is done in jdmarker.c, jdhuff.c, and jdphuff.c.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Private state */
+
+typedef struct {
+  struct jpeg_input_controller pub; /* public fields */
+
+  boolean inheaders;		/* TRUE until first SOS is reached */
+} my_input_controller;
+
+typedef my_input_controller * my_inputctl_ptr;
+
+
+/* Forward declarations */
+METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo));
+
+
+/*
+ * Routines to calculate various quantities related to the size of the image.
+ */
+
+LOCAL(void)
+initial_setup (j_decompress_ptr cinfo)
+/* Called once, when first SOS marker is reached */
+{
+  int ci;
+  jpeg_component_info *compptr;
+
+  /* Make sure image isn't bigger than I can handle */
+  if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION ||
+      (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
+    ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
+
+  /* For now, precision must match compiled-in value... */
+  if (cinfo->data_precision != BITS_IN_JSAMPLE)
+    ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
+
+  /* Check that number of components won't exceed internal array sizes */
+  if (cinfo->num_components > MAX_COMPONENTS)
+    ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+	     MAX_COMPONENTS);
+
+  /* Compute maximum sampling factors; check factor validity */
+  cinfo->max_h_samp_factor = 1;
+  cinfo->max_v_samp_factor = 1;
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR ||
+	compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR)
+      ERREXIT(cinfo, JERR_BAD_SAMPLING);
+    cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor,
+				   compptr->h_samp_factor);
+    cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor,
+				   compptr->v_samp_factor);
+  }
+
+  /* We initialize DCT_scaled_size and min_DCT_scaled_size to DCTSIZE.
+   * In the full decompressor, this will be overridden by jdmaster.c;
+   * but in the transcoder, jdmaster.c is not used, so we must do it here.
+   */
+  cinfo->min_DCT_scaled_size = DCTSIZE;
+
+  /* Compute dimensions of components */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    compptr->DCT_scaled_size = DCTSIZE;
+    /* Size in DCT blocks */
+    compptr->width_in_blocks = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
+		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
+    compptr->height_in_blocks = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
+		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
+    /* downsampled_width and downsampled_height will also be overridden by
+     * jdmaster.c if we are doing full decompression.  The transcoder library
+     * doesn't use these values, but the calling application might.
+     */
+    /* Size in samples */
+    compptr->downsampled_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
+		    (long) cinfo->max_h_samp_factor);
+    compptr->downsampled_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
+		    (long) cinfo->max_v_samp_factor);
+    /* Mark component needed, until color conversion says otherwise */
+    compptr->component_needed = TRUE;
+    /* Mark no quantization table yet saved for component */
+    compptr->quant_table = NULL;
+  }
+
+  /* Compute number of fully interleaved MCU rows. */
+  cinfo->total_iMCU_rows = (JDIMENSION)
+    jdiv_round_up((long) cinfo->image_height,
+		  (long) (cinfo->max_v_samp_factor*DCTSIZE));
+
+  /* Decide whether file contains multiple scans */
+  if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode)
+    cinfo->inputctl->has_multiple_scans = TRUE;
+  else
+    cinfo->inputctl->has_multiple_scans = FALSE;
+}
+
+
+LOCAL(void)
+per_scan_setup (j_decompress_ptr cinfo)
+/* Do computations that are needed before processing a JPEG scan */
+/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */
+{
+  int ci, mcublks, tmp;
+  jpeg_component_info *compptr;
+  
+  if (cinfo->comps_in_scan == 1) {
+    
+    /* Noninterleaved (single-component) scan */
+    compptr = cinfo->cur_comp_info[0];
+    
+    /* Overall image size in MCUs */
+    cinfo->MCUs_per_row = compptr->width_in_blocks;
+    cinfo->MCU_rows_in_scan = compptr->height_in_blocks;
+    
+    /* For noninterleaved scan, always one block per MCU */
+    compptr->MCU_width = 1;
+    compptr->MCU_height = 1;
+    compptr->MCU_blocks = 1;
+    compptr->MCU_sample_width = compptr->DCT_scaled_size;
+    compptr->last_col_width = 1;
+    /* For noninterleaved scans, it is convenient to define last_row_height
+     * as the number of block rows present in the last iMCU row.
+     */
+    tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
+    if (tmp == 0) tmp = compptr->v_samp_factor;
+    compptr->last_row_height = tmp;
+    
+    /* Prepare array describing MCU composition */
+    cinfo->blocks_in_MCU = 1;
+    cinfo->MCU_membership[0] = 0;
+    
+  } else {
+    
+    /* Interleaved (multi-component) scan */
+    if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN)
+      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan,
+	       MAX_COMPS_IN_SCAN);
+    
+    /* Overall image size in MCUs */
+    cinfo->MCUs_per_row = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width,
+		    (long) (cinfo->max_h_samp_factor*DCTSIZE));
+    cinfo->MCU_rows_in_scan = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height,
+		    (long) (cinfo->max_v_samp_factor*DCTSIZE));
+    
+    cinfo->blocks_in_MCU = 0;
+    
+    for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+      compptr = cinfo->cur_comp_info[ci];
+      /* Sampling factors give # of blocks of component in each MCU */
+      compptr->MCU_width = compptr->h_samp_factor;
+      compptr->MCU_height = compptr->v_samp_factor;
+      compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
+      compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_scaled_size;
+      /* Figure number of non-dummy blocks in last MCU column & row */
+      tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
+      if (tmp == 0) tmp = compptr->MCU_width;
+      compptr->last_col_width = tmp;
+      tmp = (int) (compptr->height_in_blocks % compptr->MCU_height);
+      if (tmp == 0) tmp = compptr->MCU_height;
+      compptr->last_row_height = tmp;
+      /* Prepare array describing MCU composition */
+      mcublks = compptr->MCU_blocks;
+      if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU)
+	ERREXIT(cinfo, JERR_BAD_MCU_SIZE);
+      while (mcublks-- > 0) {
+	cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci;
+      }
+    }
+    
+  }
+}
+
+
+/*
+ * Save away a copy of the Q-table referenced by each component present
+ * in the current scan, unless already saved during a prior scan.
+ *
+ * In a multiple-scan JPEG file, the encoder could assign different components
+ * the same Q-table slot number, but change table definitions between scans
+ * so that each component uses a different Q-table.  (The IJG encoder is not
+ * currently capable of doing this, but other encoders might.)  Since we want
+ * to be able to dequantize all the components at the end of the file, this
+ * means that we have to save away the table actually used for each component.
+ * We do this by copying the table at the start of the first scan containing
+ * the component.
+ * The JPEG spec prohibits the encoder from changing the contents of a Q-table
+ * slot between scans of a component using that slot.  If the encoder does so
+ * anyway, this decoder will simply use the Q-table values that were current
+ * at the start of the first scan for the component.
+ *
+ * The decompressor output side looks only at the saved quant tables,
+ * not at the current Q-table slots.
+ */
+
+LOCAL(void)
+latch_quant_tables (j_decompress_ptr cinfo)
+{
+  int ci, qtblno;
+  jpeg_component_info *compptr;
+  JQUANT_TBL * qtbl;
+
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* No work if we already saved Q-table for this component */
+    if (compptr->quant_table != NULL)
+      continue;
+    /* Make sure specified quantization table is present */
+    qtblno = compptr->quant_tbl_no;
+    if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
+	cinfo->quant_tbl_ptrs[qtblno] == NULL)
+      ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
+    /* OK, save away the quantization table */
+    qtbl = (JQUANT_TBL *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(JQUANT_TBL));
+    MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL));
+    compptr->quant_table = qtbl;
+  }
+}
+
+
+/*
+ * Initialize the input modules to read a scan of compressed data.
+ * The first call to this is done by jdmaster.c after initializing
+ * the entire decompressor (during jpeg_start_decompress).
+ * Subsequent calls come from consume_markers, below.
+ */
+
+METHODDEF(void)
+start_input_pass (j_decompress_ptr cinfo)
+{
+  per_scan_setup(cinfo);
+  latch_quant_tables(cinfo);
+  (*cinfo->entropy->start_pass) (cinfo);
+  (*cinfo->coef->start_input_pass) (cinfo);
+  cinfo->inputctl->consume_input = cinfo->coef->consume_data;
+}
+
+
+/*
+ * Finish up after inputting a compressed-data scan.
+ * This is called by the coefficient controller after it's read all
+ * the expected data of the scan.
+ */
+
+METHODDEF(void)
+finish_input_pass (j_decompress_ptr cinfo)
+{
+  cinfo->inputctl->consume_input = consume_markers;
+}
+
+
+/*
+ * Read JPEG markers before, between, or after compressed-data scans.
+ * Change state as necessary when a new scan is reached.
+ * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
+ *
+ * The consume_input method pointer points either here or to the
+ * coefficient controller's consume_data routine, depending on whether
+ * we are reading a compressed data segment or inter-segment markers.
+ */
+
+METHODDEF(int)
+consume_markers (j_decompress_ptr cinfo)
+{
+  my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl;
+  int val;
+
+  if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */
+    return JPEG_REACHED_EOI;
+
+  val = (*cinfo->marker->read_markers) (cinfo);
+
+  switch (val) {
+  case JPEG_REACHED_SOS:	/* Found SOS */
+    if (inputctl->inheaders) {	/* 1st SOS */
+      initial_setup(cinfo);
+      inputctl->inheaders = FALSE;
+      /* Note: start_input_pass must be called by jdmaster.c
+       * before any more input can be consumed.  jdapimin.c is
+       * responsible for enforcing this sequencing.
+       */
+    } else {			/* 2nd or later SOS marker */
+      if (! inputctl->pub.has_multiple_scans)
+	ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */
+      start_input_pass(cinfo);
+    }
+    break;
+  case JPEG_REACHED_EOI:	/* Found EOI */
+    inputctl->pub.eoi_reached = TRUE;
+    if (inputctl->inheaders) {	/* Tables-only datastream, apparently */
+      if (cinfo->marker->saw_SOF)
+	ERREXIT(cinfo, JERR_SOF_NO_SOS);
+    } else {
+      /* Prevent infinite loop in coef ctlr's decompress_data routine
+       * if user set output_scan_number larger than number of scans.
+       */
+      if (cinfo->output_scan_number > cinfo->input_scan_number)
+	cinfo->output_scan_number = cinfo->input_scan_number;
+    }
+    break;
+  case JPEG_SUSPENDED:
+    break;
+  }
+
+  return val;
+}
+
+
+/*
+ * Reset state to begin a fresh datastream.
+ */
+
+METHODDEF(void)
+reset_input_controller (j_decompress_ptr cinfo)
+{
+  my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl;
+
+  inputctl->pub.consume_input = consume_markers;
+  inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */
+  inputctl->pub.eoi_reached = FALSE;
+  inputctl->inheaders = TRUE;
+  /* Reset other modules */
+  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
+  (*cinfo->marker->reset_marker_reader) (cinfo);
+  /* Reset progression state -- would be cleaner if entropy decoder did this */
+  cinfo->coef_bits = NULL;
+}
+
+
+/*
+ * Initialize the input controller module.
+ * This is called only once, when the decompression object is created.
+ */
+
+GLOBAL(void)
+jinit_input_controller (j_decompress_ptr cinfo)
+{
+  my_inputctl_ptr inputctl;
+
+  /* Create subobject in permanent pool */
+  inputctl = (my_inputctl_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				SIZEOF(my_input_controller));
+  cinfo->inputctl = (struct jpeg_input_controller *) inputctl;
+  /* Initialize method pointers */
+  inputctl->pub.consume_input = consume_markers;
+  inputctl->pub.reset_input_controller = reset_input_controller;
+  inputctl->pub.start_input_pass = start_input_pass;
+  inputctl->pub.finish_input_pass = finish_input_pass;
+  /* Initialize state: can't use reset_input_controller since we don't
+   * want to try to reset other modules yet.
+   */
+  inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */
+  inputctl->pub.eoi_reached = FALSE;
+  inputctl->inheaders = TRUE;
+}