mini branch for NETSCAPE_7_0_PR1_RELEASE - ycalonje checking in as cltbld

git-svn-id: svn://10.0.0.236/branches/NETSCAPE_7_0_PR1_RELEASE_MINI_BRANCH@122028 18797224-902f-48f8-a5cc-f745e15eee43

CVSROOT/FilesToNotExport

@@ -1 +0,0 @@
-CVSROOT/history

CVSROOT/README

@@ -1,4 +0,0 @@
-If you change the modules file, you *MUST* run:
- check-modules.pl modules
-
-*before* cvs committing the new modules file.

CVSROOT/check-modules.pl

@@ -1,257 +0,0 @@
-#!/usr/bin/env perl
-
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is this file as it was released upon February 25, 1999.
-#
-# The Initial Developer of the Original Code is Netscape Communications
-# Corporation. Portions created by Netscape are
-# Copyright (C) 1999 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-
-#
-# check-modules.pl - Check cvs modules file for duplicates and syntax errors.
-#
-# TODO:
-#  - Parse output of 'cvs co -c' command in addition to the raw file.
-#
-# Send comments, improvements, bugs to Steve Lamm (slamm@netscape.com).
-
-# $Id: check-modules.pl,v 1.1 2000-06-01 11:03:22 leaf%mozilla.org Exp $
-
-require 5.004;
-
-use Getopt::Std;
-
-sub usage
-{
-  my ($progname) = $0 =~ /([^\/]+)$/;
-  die "Usage: $progname [options] [<module_file>]
-   Reads from stdin if no file is given.
-   Options:
-      -v    Verbose. Print the modules and what they include.
-      -h    Print this usage message.
-";
-}
-
-&usage if !getopts('hv');
-&usage if defined($opt_h);
-
-######################################################################
-# begin main
-
-
-# The subroutine &parse_input creates the globals @module_names,
-#    %module_tree, and %line_number (described below).
-&parse_input;
-
-foreach $module (@module_names)
-{
-  &check_module($module);
-}
-
-# end main
-######################################################################
-# begin subroutines
-
-sub parse_input
-{
-  # Globals created:
-  #      @module_names - List of module names in the order they are seen.
-  #      %module_tree - Hash table of lists.  Keys are module names. 
-  #                     Values are lists of module names and diretories.
-  #      %line_number - Hash indexed by module name and module item.  
-  #                     Values are line numbers.
-
-  @module_names = ();
-  %module_tree = ();
-  %line_number = ();
-
-  while (<>) 
-  {
-    next if /^\#/ || /^\s*$/;
-
-    # Check for a module definition
-    if (/^([_a-zA-Z0-9]+)\s+(?:-l\s+)?-a\s*(.*)$/) 
-    {
-      my ($module_name) = $1;
-      my (@sub_items) = ();
-      my ($line) = $2;
-
-      push @module_names, $module_name;
-
-      # Read line continuations (i.e. lines with '\' on the end).
-      while ($line =~ /\\$/)
-      {
-	chomp $line;
-	$line =~ s/^\s*(.*?)\s*\\$/$1/;
-        if (length($line) > 0)
-        {
-          my (@line_items) = split(/\s+/, $line);
-          push @sub_items, @line_items;
-          &save_line_numbers($module_name, $., @line_items);
-        }
-	$line = <>;
-      }
-      chomp $line;
-      $line =~ s/^\s*(.*?)\s*$/$1/;
-      my (@line_items) = split(/\s+/, $line);
-      push @sub_items, @line_items;
-      &save_line_numbers($module_name, $., @line_items);
-
-      $module_tree{$module_name} = \@sub_items;
-    }
-    else
-    {
-      die "Unexpected input: line $.: $_\n";
-    }
-  }
-}
-
-sub check_module
-{
-  my ($module) = $_[0];
-  my ($sub_module, $sub_dir, $prev_module);
-
-  # Globals created:
-  #      %have_checked - List of modules already checked. 
-  #      %full_list    - All the directories for a module.
-  #                      Indexed by module and sub directory.
-  #                      Values are the module that added the directory.
-
-  return if defined($have_checked{$module});
-
-  $full_list{$module} = {};
-
-  foreach $sub_module ( &get_modules($module) )
-  {
-    &check_module($sub_module);
-
-    # Add the directories of the sub_module to this module
-    while (($sub_dir, $prev_module) = each %{$full_list{$sub_module}})
-    {
-      $full_list{$module}{$sub_dir} = $prev_module;
-    }
-  }
-  foreach $sub_dir ( &get_directories($module) )
-  {
-    if (defined($full_list{$module}{$sub_dir}))
-    {
-      my ($previous_module) = $full_list{$module}{$sub_dir};
-      
-      &warn_multiple($sub_dir, $module, $previous_module);
-    }
-    else
-    {
-      $full_list{$module}{$sub_dir} = $module;
-
-      # Check if parent or child of directory was previously added
-      #
-      &check_inclusion($sub_dir, $module);
-    }
-  }
-  if (defined($opt_v))
-  {
-    print "$module\n";
-    while (($sub_dir, $prev_module) = each %{$full_list{$module}})
-    {
-      print "  $sub_dir, $prev_module\n";
-    }
-  }
-  $have_checked{$module} = 1;
-}
-
-sub get_modules
-{
-  my ($module) = $_[0];
-  my (@output) = ();
-  my ($sub_item);
-
-  foreach $sub_item ( @{ $module_tree{$module} } )
-  {
-    push @output, $sub_item if defined($module_tree{$sub_item});
-  }
-  return @output;
-}
-
-sub get_directories
-{
-  my ($module) = $_[0];
-  my (@output) = ();
-  my ($sub_item);
-
-  foreach $sub_item ( @{ $module_tree{$module} } )
-  {
-    push @output, $sub_item unless defined($module_tree{$sub_item});
-  }
-  return @output;
-}
-
-sub save_line_numbers
-{
-  my ($module, $line_num, @sub_items) = @_;
-  my ($sub_item);
-  
-  foreach $sub_item (@sub_items)
-  {
-    if (defined($line_number{$module}{$sub_item}))
-    {
-      $line_number{$module}{$sub_item} = 
-        "$line_number{$module}{$sub_item}, $line_num";
-    }
-    else
-    {
-      $line_number{$module}{$sub_item} = $line_num;
-    }
-  }
-}
-
-sub warn_multiple
-{
-  my ($sub_item, $module, $previous_module) = @_;
-  my ($line_txt) = '';
-
-  my (@lines) = split(', ', $line_number{$module}{$sub_item});
-  
-  push(@lines, split(', ', $line_number{$previous_module}{$sub_item}))
-    unless $previous_module eq $module;
-
-  $line_txt = "lines ".join(', ', sort { $a <=> $b } @lines);
-
-  warn "Error: Multiple listing: $line_txt: $sub_item.\n";
-}
-
-sub check_inclusion
-{
-  my ($sub_dir, $module) = @_;
-  my ($dir);
-
-  foreach $dir (keys %{$full_list{$module}})
-  {
-    next if $dir eq $sub_dir;
-    if (length($dir) < length($sub_dir))
-    {
-      my ($temp) = $sub_dir;
-      $sub_dir = $dir;
-      $dir = $temp;
-    }
-    if ($dir =~ /^$sub_dir\//)
-    {
-      warn "Warning: $dir (line "
-      .$line_number{$full_list{$module}{$dir}}{$dir}
-      .") pulled by $sub_dir (line "
-      .$line_number{$full_list{$module}{$sub_dir}}{$sub_dir}
-      .")\n";
-    }
-  }
-}

CVSROOT/checkoutlist

@@ -1,20 +0,0 @@
-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-#	[<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'
-passwd
-readers
-commitcheck.pl
-dolog.pl
-FilesToNotExport
-cvsmailfilter.pl
-sendnotification.pl

CVSROOT/commitcheck.pl

@@ -1,485 +0,0 @@
-#!/tools/ns/bin/perl5.004 --
-# DO NOT EDIT THIS FILE!  You must instead go to http://despot.mozilla.org/, and
-# tweak things from there.
-
-$mode{'95'} = 'Open';
-$branch{'95'} = 'HEAD';
-$fullname{'95'} = '2-D Graphics';
-$mode{'52'} = 'Open';
-$branch{'52'} = 'HEAD';
-$fullname{'52'} = 'Aurora/RDF BE';
-$mode{'53'} = 'Open';
-$branch{'53'} = 'HEAD';
-$fullname{'53'} = 'Berkeley DB';
-$mode{'55'} = 'Open';
-$branch{'55'} = 'HEAD';
-$fullname{'55'} = 'Build Config';
-$mode{'146'} = 'Restricted';
-$branch{'146'} = 'NSPRPUB_PRE_4_2_CLIENT_BRANCH';
-$fullname{'146'} = 'Client NSPR';
-$blessed{'146'} = ['sfraser%netscape.com','sdagley%netscape.com','gordon%netscape.com','beard%netscape.com',];
-$super{'146'} = ['wtc%netscape.com','seawood%netscape.com','leaf%mozilla.org',];
-$mode{'96'} = 'Open';
-$branch{'96'} = 'HEAD';
-$fullname{'96'} = 'Clipping and Compositing';
-$mode{'56'} = 'Open';
-$branch{'56'} = 'HEAD';
-$fullname{'56'} = 'Composer';
-$mode{'4'} = 'Open';
-$branch{'4'} = 'HEAD';
-$fullname{'4'} = 'default';
-$defaultid = '4';
-$mode{'3'} = 'Closed';
-$branch{'3'} = 'HEAD';
-$fullname{'3'} = 'despotaccess';
-$blessed{'3'} = [];
-$super{'3'} = ['despotdaemon%netscape.com',];
-$mode{'59'} = 'Closed';
-$branch{'59'} = 'HEAD';
-$fullname{'59'} = 'Directory SDK';
-$blessed{'59'} = [];
-$super{'59'} = ['leif%ogre.com','dmose%netscape.com','mhein%sun.com','mcs%netscape.com',];
-$mode{'103'} = 'Open';
-$branch{'103'} = 'HEAD';
-$fullname{'103'} = 'Document Object Model';
-$mode{'46'} = 'Open';
-$branch{'46'} = 'HEAD';
-$fullname{'46'} = 'ef';
-$mode{'101'} = 'Open';
-$branch{'101'} = 'HEAD';
-$fullname{'101'} = 'Embeddable Web Browser';
-$mode{'49'} = 'Open';
-$branch{'49'} = 'HEAD';
-$fullname{'49'} = 'GTK';
-$mode{'144'} = 'Open';
-$branch{'144'} = 'HEAD';
-$fullname{'144'} = 'GTK Embedding Widget';
-$mode{'62'} = 'Open';
-$branch{'62'} = 'HEAD';
-$fullname{'62'} = 'HTML to Text/PostScript Translation';
-$mode{'67'} = 'Open';
-$branch{'67'} = 'HEAD';
-$fullname{'67'} = 'I18N Library';
-$mode{'64'} = 'Open';
-$branch{'64'} = 'HEAD';
-$fullname{'64'} = 'Image Handling: JPEG';
-$mode{'155'} = 'Open';
-$branch{'155'} = 'HEAD';
-$fullname{'155'} = 'Image Handling: MNG';
-$mode{'65'} = 'Open';
-$branch{'65'} = 'HEAD';
-$fullname{'65'} = 'Image Handling: PNG';
-$mode{'63'} = 'Open';
-$branch{'63'} = 'HEAD';
-$fullname{'63'} = 'ImageLib';
-$mode{'69'} = 'Open';
-$branch{'69'} = 'HEAD';
-$fullname{'69'} = 'Java and JS Capability-Based Security';
-$mode{'130'} = 'Open';
-$branch{'130'} = 'HEAD';
-$fullname{'130'} = 'Java APIs for DOM';
-$mode{'127'} = 'Open';
-$branch{'127'} = 'HEAD';
-$fullname{'127'} = 'Java APIs to WebShell';
-$mode{'68'} = 'Open';
-$branch{'68'} = 'HEAD';
-$fullname{'68'} = 'Java Stubs';
-$mode{'128'} = 'Open';
-$branch{'128'} = 'HEAD';
-$fullname{'128'} = 'Java to XPCOM Bridge';
-$mode{'133'} = 'Open';
-$branch{'133'} = 'HEAD';
-$fullname{'133'} = 'Java Utility Classes';
-$mode{'129'} = 'Open';
-$branch{'129'} = 'HEAD';
-$fullname{'129'} = 'Java-Implemented Plugins';
-$mode{'70'} = 'Open';
-$branch{'70'} = 'HEAD';
-$fullname{'70'} = 'JavaScript';
-$mode{'71'} = 'Open';
-$branch{'71'} = 'HEAD';
-$fullname{'71'} = 'JavaScript Debugger';
-$mode{'114'} = 'Open';
-$branch{'114'} = 'HEAD';
-$fullname{'114'} = 'js-tests';
-$mode{'72'} = 'Open';
-$branch{'72'} = 'HEAD';
-$fullname{'72'} = 'LiveConnect';
-$mode{'136'} = 'Closed';
-$branch{'136'} = 'HEAD';
-$fullname{'136'} = 'Locked-Content';
-$blessed{'136'} = [];
-$super{'136'} = ['hyatt%netscape.com',];
-$mode{'123'} = 'Open';
-$branch{'123'} = 'HEAD';
-$fullname{'123'} = 'Mail/News';
-$mode{'124'} = 'Open';
-$branch{'124'} = 'HEAD';
-$fullname{'124'} = 'MIME';
-$mode{'157'} = 'Open';
-$branch{'157'} = 'HEAD';
-$fullname{'157'} = 'Movemail';
-$mode{'112'} = 'Open';
-$branch{'112'} = 'HEAD';
-$fullname{'112'} = 'Mozilla Tools';
-$mode{'19'} = 'Open';
-$branch{'19'} = 'HEAD';
-$fullname{'19'} = 'mozilla-toplevel';
-$mode{'147'} = 'Open';
-$branch{'147'} = 'HEAD';
-$fullname{'147'} = 'Mstone';
-$mode{'77'} = 'Open';
-$branch{'77'} = 'HEAD';
-$fullname{'77'} = 'NetLib';
-$mode{'102'} = 'Open';
-$branch{'102'} = 'HEAD';
-$fullname{'102'} = 'New HTML Parser';
-$mode{'100'} = 'Open';
-$branch{'100'} = 'HEAD';
-$fullname{'100'} = 'New HTML Style System';
-$mode{'98'} = 'Open';
-$branch{'98'} = 'HEAD';
-$fullname{'98'} = 'New Layout Engine';
-$mode{'122'} = 'Open';
-$branch{'122'} = 'HEAD';
-$fullname{'122'} = 'News';
-$mode{'78'} = 'Restricted';
-$branch{'78'} = 'HEAD';
-$fullname{'78'} = 'NSPR';
-$blessed{'78'} = ['sfraser%netscape.com','sdagley%netscape.com','gordon%netscape.com','beard%netscape.com',];
-$super{'78'} = ['srinivas%netscape.com','seawood%netscape.com','wtc%netscape.com',];
-$mode{'163'} = 'Restricted';
-$branch{'163'} = 'NSS_3_3_BRANCH';
-$fullname{'163'} = 'NSS Stable Release Branch';
-$blessed{'163'} = [];
-$super{'163'} = ['wtc%netscape.com','relyea%netscape.com','ddrinan%netscape.com','glen.beasley%sun.com','ian.mcgreer%sun.com','javi%netscape.com','jpierre%netscape.com','kirk.erickson%sun.com','nelsonb%netscape.com','nicolson%netscape.com','sonja.mirtitsch%sun.com','tfox%netscape.com',];
-$mode{'159'} = 'Open';
-$branch{'159'} = 'HEAD';
-$fullname{'159'} = 'NSS Trunk';
-$mode{'162'} = 'Open';
-$branch{'162'} = 'HEAD';
-$fullname{'162'} = 'P3P';
-$mode{'111'} = 'Open';
-$branch{'111'} = 'HEAD';
-$fullname{'111'} = 'PerlConnect';
-$mode{'113'} = 'Open';
-$branch{'113'} = 'HEAD';
-$fullname{'113'} = 'Photon';
-$mode{'81'} = 'Open';
-$branch{'81'} = 'HEAD';
-$fullname{'81'} = 'Plugins';
-$mode{'82'} = 'Open';
-$branch{'82'} = 'HEAD';
-$fullname{'82'} = 'Preferences';
-$mode{'120'} = 'Open';
-$branch{'120'} = 'HEAD';
-$fullname{'120'} = 'Profile Manager';
-$mode{'83'} = 'Open';
-$branch{'83'} = 'HEAD';
-$fullname{'83'} = 'Progress Window';
-$mode{'161'} = 'Open';
-$branch{'161'} = 'HEAD';
-$fullname{'161'} = 'Qt-based gfx and widget';
-$mode{'84'} = 'Open';
-$branch{'84'} = 'HEAD';
-$fullname{'84'} = 'Registry';
-$mode{'143'} = 'Open';
-$branch{'143'} = 'HEAD';
-$fullname{'143'} = 'Remote XPCOM';
-$mode{'138'} = 'Open';
-$branch{'138'} = 'HEAD';
-$fullname{'138'} = 'Rhino';
-$mode{'145'} = 'Restricted';
-$branch{'145'} = 'HEAD';
-$fullname{'145'} = 'security';
-$blessed{'145'} = ['scc%mozilla.org','jgmyers%netscape.com','jaggernaut%netscape.com','cotter%netscape.com','cls%seawood.org','bryner%netscape.com','alecf%netscape.com',];
-$super{'145'} = ['wtc%netscape.com','tfox%netscape.com','sonja.mirtitsch%sun.com','rangansen%netscape.com','nicolson%netscape.com','nelsonb%netscape.com','kirk.erickson%sun.com','kaie%netscape.com','jpierre%netscape.com','javi%netscape.com','ian.mcgreer%sun.com','glen.beasley%sun.com','chrisk%netscape.com','thayes%netscape.com','relyea%netscape.com','ddrinan%netscape.com',];
-$mode{'151'} = 'Open';
-$branch{'151'} = 'HEAD';
-$fullname{'151'} = 'Security - Mozilla PSM Glue';
-$mode{'86'} = 'Open';
-$branch{'86'} = 'HEAD';
-$fullname{'86'} = 'Security Stubs';
-$mode{'110'} = 'Open';
-$branch{'110'} = 'HEAD';
-$fullname{'110'} = 'Silent Download';
-$mode{'115'} = 'Open';
-$branch{'115'} = 'HEAD';
-$fullname{'115'} = 'small-devices';
-$mode{'87'} = 'Open';
-$branch{'87'} = 'HEAD';
-$fullname{'87'} = 'SmartUpdate';
-$mode{'160'} = 'Open';
-$branch{'160'} = 'HEAD';
-$fullname{'160'} = 'String';
-$mode{'154'} = 'Open';
-$branch{'154'} = 'HEAD';
-$fullname{'154'} = 'tools';
-$mode{'158'} = 'Open';
-$branch{'158'} = 'HEAD';
-$fullname{'158'} = 'URI Loader';
-$mode{'156'} = 'Open';
-$branch{'156'} = 'HEAD';
-$fullname{'156'} = 'ViXEn';
-$mode{'134'} = 'Open';
-$branch{'134'} = 'HEAD';
-$fullname{'134'} = 'Widgets';
-$mode{'121'} = 'Open';
-$branch{'121'} = 'HEAD';
-$fullname{'121'} = 'Xlib-based gfx + widget';
-$mode{'88'} = 'Open';
-$branch{'88'} = 'HEAD';
-$fullname{'88'} = 'XML';
-$mode{'141'} = 'Open';
-$branch{'141'} = 'HEAD';
-$fullname{'141'} = 'xmlterm';
-$mode{'90'} = 'Open';
-$branch{'90'} = 'HEAD';
-$fullname{'90'} = 'XP File Handling';
-$mode{'137'} = 'Open';
-$branch{'137'} = 'HEAD';
-$fullname{'137'} = 'XPApps';
-$mode{'89'} = 'Open';
-$branch{'89'} = 'HEAD';
-$fullname{'89'} = 'XPCOM';
-$mode{'118'} = 'Open';
-$branch{'118'} = 'HEAD';
-$fullname{'118'} = 'XPConnect';
-$mode{'117'} = 'Open';
-$branch{'117'} = 'HEAD';
-$fullname{'117'} = 'XPIDL';
-$mode{'150'} = 'Open';
-$branch{'150'} = 'HEAD';
-$fullname{'150'} = 'XPInstall';
-$mode{'106'} = 'Open';
-$branch{'106'} = 'HEAD';
-$fullname{'106'} = 'XPToolkit';
-$mode{'140'} = 'Open';
-$branch{'140'} = 'HEAD';
-$fullname{'140'} = 'XSLT Processor';
-$mode{'135'} = 'Open';
-$branch{'135'} = 'HEAD';
-$fullname{'135'} = 'xul.css';
-$mode{'93'} = 'Open';
-$branch{'93'} = 'HEAD';
-$fullname{'93'} = 'Zlib';
-sub GetT {
-($b,$_) = (@_);
-if ($b eq 'HEAD') {
-if (m:^CVSROOT/commitcheck\.pl$:) {return '3';}
-if (m:^CVSROOT/passwd$:) {return '3';}
-if (m:^mozilla/security/coreconf/.*$:) {return '145';}
-if (m:^mozilla/security/jss/.*$:) {return '145';}
-if (m:^mozilla/security/nss/.*$:) {return '145';}
-if (m:^mozilla/[^/]*$:) {return '19';}
-if (m:^mozilla/gfx/src/xlib/.*$:) {return '121';}
-if (m:^mozilla/widget/src/xlib/.*$:) {return '121';}
-if (m:^mozilla/ef/.*$:) {return '46';}
-if (m:^mozilla/gfx/src/gtk/.*$:) {return '49';}
-if (m:^mozilla/widget/src/gtk/.*$:) {return '49';}
-if (m:^mozilla/widget/timer/src/unix/gtk$:) {return '49';}
-if (m:^mozilla/rdf/.*$:) {return '52';}
-if (m:^mozilla/dbm/.*$:) {return '53';}
-if (m:^mozilla/build/.*$:) {return '55';}
-if (m:^mozilla/config/.*$:) {return '55';}
-if (m:^mozilla/l10n/.*$:) {return '55';}
-if (m:^mozilla/editor$:) {return '56';}
-if (m:^mozilla/directory/buildsdk\.txt$:) {return '59';}
-if (m:^mozilla/directory/c-sdk/.*$:) {return '59';}
-if (m:^mozilla/directory/ldapsdk\.mak$:) {return '59';}
-if (m:^mozilla/directory/ldapsdk\.mk$:) {return '59';}
-if (m:^mozilla/directory/Makefile$:) {return '59';}
-if (m:^gfx/src/ps/.*$:) {return '62';}
-if (m:^mozilla/modules/libimg/.*$:) {return '63';}
-if (m:^mozilla/modules/libutil/.*$:) {return '63';}
-if (m:^mozilla/intl/.*$:) {return '67';}
-if (m:^mozilla/modules/oji/.*$:) {return '68';}
-if (m:^mozilla/nav-java/.*$:) {return '68';}
-if (m:^mozilla/sun-java/.*$:) {return '68';}
-if (m:^mozilla/caps/.*$:) {return '69';}
-if (m:^js/src/*\.c$:) {return '70';}
-if (m:^js/src/*\.h$:) {return '70';}
-if (m:^mozilla/extensions/jsd/.*$:) {return '71';}
-if (m:^mozilla/js/jsd/.*$:) {return '71';}
-if (m:^js/src/liveconnect/.*$:) {return '72';}
-if (m:^mozilla/netwerk/.*$:) {return '77';}
-if (m:^mozilla/nsprpub/.*$:) {return '78';}
-if (m:^mozilla/modules/plugin/.*$:) {return '81';}
-if (m:^mozilla/modules/libpref/.*$:) {return '82';}
-if (m:^mozilla/modules/progress/.*$:) {return '83';}
-if (m:^mozilla/modules/libreg/.*$:) {return '84';}
-if (m:^mozilla/modules/security/.*$:) {return '86';}
-if (m:^mozilla/modules/softupdt/.*$:) {return '87';}
-if (m:^mozilla/content/xml/.*$:) {return '88';}
-if (m:^mozilla/expat/.*$:) {return '88';}
-if (m:^mozilla/extensions/xmlextras/.*$:) {return '88';}
-if (m:^mozilla/xpcom/.*$:) {return '89';}
-if (m:^xpcom/io$:) {return '90';}
-if (m:^mozilla/modules/zlib/.*$:) {return '93';}
-if (m:^mozilla/gfx/public/.*$:) {return '95';}
-if (m:^mozilla/gfx/src/windows/.*$:) {return '95';}
-if (m:^mozilla/view/.*$:) {return '96';}
-if (m:^mozilla/layout/.*$:) {return '98';}
-if (m:^modules/libimg/mng/.*$:) {return '155';}
-if (m:^modules/libimg/mngcom/.*$:) {return '155';}
-if (m:^mozilla/embedding/.*$:) {return '101';}
-if (m:^mozilla/webshell/.*$:) {return '101';}
-if (m:^mozilla/htmlparser/.*$:) {return '102';}
-if (m:^mozilla/dom/.*$:) {return '103';}
-if (m:^mozilla/js/rhino/.*$:) {return '138';}
-if (m:^mozilla/xpfe$:) {return '137';}
-if (m:^mozilla/js/tests$:) {return '114';}
-if (m:^js/src/perlconnect$:) {return '111';}
-if (m:^mozilla/silentdl/.*$:) {return '110';}
-if (m:^mozilla/extensions/transformiix/.*$:) {return '140';}
-if (m:^base/src/photon/.*$:) {return '113';}
-if (m:^gfx/src/photon/.*$:) {return '113';}
-if (m:^widget/src/photon/.*$:) {return '113';}
-if (m:^mozilla/widget/public/.*$:) {return '134';}
-if (m:^mozilla/profile$:) {return '120';}
-if (m:^mozilla/tools/.*$:) {return '112';}
-if (m:^xpcom/typelib$:) {return '117';}
-if (m:^js/src/xpconnect$:) {return '118';}
-if (m:^xpcom/reflect/xptcall$:) {return '118';}
-if (m:^xpcom/reflect/xptinfo$:) {return '118';}
-if (m:^mozilla/mailnews/news/.*$:) {return '122';}
-if (m:^mozilla/mailnews/[^/]*$:) {return '123';}
-if (m:^mozilla/mailnews/mime/[^/]*$:) {return '124';}
-if (m:^mozilla/java/xpcom/.*$:) {return '128';}
-if (m:^mozilla/java/plugins/.*$:) {return '129';}
-if (m:^mozilla/java/webclient/.*$:) {return '127';}
-if (m:^mozilla/java/dom/.*$:) {return '130';}
-if (m:^mozilla/java/util/.*$:) {return '133';}
-if (m:^mozilla/extensions/xmlterm/.*$:) {return '141';}
-if (m:^xpcom/remote$:) {return '143';}
-if (m:^embedding/browser/gtk$:) {return '144';}
-if (m:^mozilla/mstone/.*$:) {return '147';}
-if (m:^mozilla/xpinstall/.*$:) {return '150';}
-if (m:^mozilla/extensions/psm-glue/.*$:) {return '151';}
-if (m:^mozilla/extensions/vixen/.*$:) {return '156';}
-if (m:^mozilla/mailnews/movemail$:) {return '157';}
-if (m:^mozilla/uriloader/.*$:) {return '158';}
-if (m:^mozilla/string/.*$:) {return '160';}
-if (m:^mozilla/gfx/src/qt/.*$:) {return '161';}
-if (m:^mozilla/widget/src/qt/.*$:) {return '161';}
-if (m:^mozilla/extensions/p3p/.*$:) {return '162';}
-}
-if ($b eq 'NSPRPUB_PRE_4_2_CLIENT_BRANCH') {
-if (m:^mozilla/nsprpub/.*$:) {return '146';}
-}
-if ($b eq 'NSS_3_3_BRANCH') {
-if (m:^mozilla/security/coreconf/.*$:) {return '163';}
-if (m:^mozilla/security/nss/.*$:) {return '163';}
-}
-return '';
-}
-
-
-
-
-
-$debug = 0;
-
-$origrepository = shift(@ARGV);
-@files = @ARGV;
-
-
-$envcvsroot = $ENV{'CVSROOT'};
-open( REP, "<CVS/Repository");
-$repository = <REP>;
-chop($repository);
-close(REP);
-$repository =~ s:^$envcvsroot/::;
-
-
-$doit = 0;
-
-$| = 1;
-
-
-if( $debug){
-    print STDERR "----------------------------------------------\n";
-    print STDERR "files: @files\n";
-    print STDERR "origrepository: $origrepository\n";
-    print STDERR "    repository: $repository\n";
-    print STDERR "----------------------------------------------\n";
-}
-
-open(ENT, "<CVS/Entries" );
-while( <ENT> ){
-    chop;
-    ($d,$fn,$rev,$mod_time,$sticky,$tag) = split(/\//);
-    if ($tag =~ /^T(.*)$/) {
-	$fbranch{$fn} = $1;
-    }
-}
-close ENT;
-
-foreach $f (@files) {
-    $b = "";
-    if (defined $fbranch{$f}) {$b = $fbranch{$f};}
-    if ($b eq "") {$b = "HEAD";}
-    $t = GetT($b, "$repository/$f");
-    if ($debug) {
-        print STDERR "GetT returned '$t' for '$repository/$f' branch '$b'\n";
-    }
-    if ($t eq "") {
-        $t = $defaultid;
-    }
-    if (!defined $mode{$t} || $mode{$t} eq "Open") {
-        next;
-    }
-    if ($debug) {
-        print STDERR "Checking twig $t\n";
-    }
-    # OK, we have a match.  See if we're allowed to checkin here.
-    if ($username eq "") {
-        $username = $ENV{"CVS_USER"} || getlogin || (getpwuid($<))[0] || "nobody";
-        if ($debug) {
-            print STDERR "Username is $username\n";
-            print STDERR "getlogin returns " . getlogin . "\n";
-            print STDERR '(getpwuid($<))[0] returns ' . (getpwuid($<))[0] . "\n";
-            print STDERR "Environment:\n";
-            foreach $key (sort(keys %ENV)) {
-                print STDERR $key, '=', $ENV{$key}, "\n";
-            }
-        }
-    }
-    $ok = 0;
-    $s = $super{$t};
-    foreach $u (@$s) {
-        if ($debug) {
-            print STDERR "Checking against super $u\n";
-        }
-        if ($u eq $username) {
-            $ok = 1;
-            break;
-        }
-    }
-    if ($mode{$t} eq "Restricted") {
-        my $b = $blessed{$t};
-        foreach $u (@$b) {
-            if ($debug) {
-                print STDERR "Checking against blessed $u\n";
-            }
-            if ($u eq $username) {
-                $ok = 1;
-                break;
-            }
-        }
-    }
-    if (!$ok) {
-        print STDERR "You may not check into partition $fullname{$t}\n";
-	print STDERR "the file $repository/$f on branch $b\n";
-        print STDERR "If you think you should be allowed to, send mail to\n";
-        print STDERR "one of the below people:\n";
-        $s = $super{$t};
-        foreach $u (@$s) {
-            $u =~ s/%/@/;
-            print STDERR "  $u\n";
-        }
-        exit 1;
-    }
-}
-
-exit 0;

CVSROOT/commitinfo

@@ -1,16 +0,0 @@
-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list 
-# of files to check.  A non-zero exit of the filter program will 
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
-ALL		$CVSROOT/CVSROOT/commitcheck.pl

CVSROOT/config

@@ -1,6 +0,0 @@
-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Set `PreservePermissions' to `yes' to save file status information
-# in the repository.
-#PreservePermissions=no

CVSROOT/cvsignore

@@ -1,36 +0,0 @@
-.gdbinit
-.HSancillary
-.Makedepend
-.makedepend
-.MCC_Cache_FAT
-.MCC_Global_History
-.md
-.pure
-made
-make.log
-make.dep
-nuke
-_jmc
-*.class
-.depends
-.deps
-.d
-*.dylib
-__.SYMDEF*
-manifest.mnw
-_gen
-_stubs
-*_DBG.OBJ
-*_DBG_EDT.OBJ
-*_OPT.OBJ
-*_OPT_EDT.OBJ
-*_DBG.OBJD
-so_locations
-*.flc
-*.map
-depend.mk
-_xpidlgen
-ti_files
-*.rpo
-.*.timestamp
-

CVSROOT/cvsmailfilter

@@ -1,24 +0,0 @@
-#!/bin/sh
-PATH=/bin:/usr/bin:/sbin:/usr/sbin;export PATH
-
-(
-URL="subdir=`dirname $1`&files=`basename $1`"
-
-
-
-echo "Subject: $1"
-echo 'Content-Type: text/html; charset=us-ascii'
-echo 'Content-Transfer-Encoding: 7bit'
-echo 'Content-Disposition: inline'
-
-TMP=/tmp/cvsmf.$$
-trap "rm -f $TMP" 0 1 2 15
-cat > $TMP
-BRANCH=`sed -n 's@^Revision/Branch: \(.*\)@\1@p' $TMP`
-if test -n "$BRANCH"; then
-    URL="$URL&branch=$BRANCH"
-fi
-
-echo '<A HREF="http://warp.netscape.com/webtools/bonsai/cvsview2.cgi?'$URL'&command=DIRECTORY">View differences</A><BR>\n'
-
-) | mail $2

CVSROOT/cvsmailfilter.pl

@@ -1,163 +0,0 @@
-#! /tools/ns/bin/perl5.004
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-
-# Arguments:
-#
-# -a Only send checkin messages which contain added files.  All other checkin
-#    messages will be ignored. 
-# -u <url>   Base URL for the Bonsai directory; "/cvsview2.cgi" will get 
-#     appended to this with appropriate args.
-# -h <hostname>    Host whose SMTP server we will contact to send mail.
-# -s <string>	 String specifying dir and filenames.  As generated by "%s"
-#     in a CVSROOT/loginfo file
-# -f <file>	A regexp.  If present, then only checkins to files whose
-#     name (without the directory) matches the regexp will generate mail.
-#
-# The remaining args are email addresses of people who should get notified.
-
-use Socket;
-
-sub get_response_code {
-    my ($expecting) = @_;
-#     if ($flag_debug) {
-# 	print STDERR "SMTP: Waiting for code $expecting\n";
-#     }
-    while (1) {
-	my $line = <S>;
-# 	if ($flag_debug) {
-# 	    print STDERR "SMTP: $line";
-# 	}
-	if ($line =~ /^[0-9]*-/) {
-	    next;
-	}
-	if ($line =~ /(^[0-9]*) /) {
-	    my $code = $1;
-	    if ($code == $expecting) {
-# 		if ($flag_debug) {
-# 		    print STDERR "SMTP: got it.\n";
-# 		}
-		return;
-	    }
-	    die "Bad response from SMTP -- $line";
-	}
-    }
-}
-
-
-
-my $debug = 0;
-my $addsonly = 0;
-
-my $mailhost = "127.0.0.1";
-my $urlbase = "";
-my $cvsargs = "";
-my $cvsroot = "";
-my @mailto;
-my $fileregexp = "";
-
-
-while (@ARGV) {
-    my $arg = shift @ARGV;
-
-    if ($arg eq '-d') {
-        $debug = 1;
-        print STDERR "Debug turned on...\n";
-    } elsif ($arg eq '-r') {
-        $cvsroot = shift @ARGV;
-    } elsif ($arg eq '-h') {
-        $mailhost = shift @ARGV;
-    } elsif ($arg eq '-u') {
-        $urlbase = shift @ARGV;
-    } elsif ($arg eq '-s') {
-        $cvsargs = shift @ARGV;
-    } elsif ($arg eq '-f') {
-        $fileregexp = shift @ARGV;
-    } elsif ($arg eq '-a') {
-        $addsonly = 1;
-    } else {
-        push(@mailto, $arg);
-    }
-}
-
-
-my $url = "";
-if ($urlbase ne "" && $cvsargs ne "") {
-    my @list = split(/ /, $cvsargs);
-    my $dir = shift @list;
-    if ($fileregexp ne "") {
-        if (grep(m/$fileregexp/, @list) <= 0) {
-            exit;
-        }
-    }
-    $url = $urlbase . "/cvsview2.cgi?command=DIRECTORY&subdir=$dir&files=" .
-        join('%2B', @list);
-}
-
-my $message = "";
-my $filesadded = 0;
-while (<>) {
-    my $line = $_;
-    if ($line =~ m@^Revision/Branch: (.*)$@) {
-        if ($url ne "") {
-            $url .= "&branch=$1";
-        }
-    }
-    # if we see that files have been added on this checkin, remember that fact
-    #
-    if ($line =~ m@^Added Files:@) {
-        $filesadded = 1;
-    }
-
-    $message .= $line;
-}
-
-# bail out if this is an adds-only run and no files have been added
-#
-if ($addsonly == 1 && $filesadded == 0 ) {
-    exit 0;
-}
-
-if ($url ne "") {
-    if ($cvsroot ne "") {
-        $url .= "&root=$cvsroot";
-    }
-    $message = "Diffs: $url\n\n" . $message;
-}
-                
-
-
-chop(my $hostname = `/bin/hostname`);
-
-my ($remote,$port, $iaddr, $paddr, $proto, $line);
-
-$remote = $mailhost;
-$port    = 25;
-if ($port =~ /\D/) { $port = getservbyname($port, 'tcp') }
-die "No port" unless $port;
-$iaddr   = inet_aton($remote)               || die "no host: $remote";
-$paddr   = sockaddr_in($port, $iaddr);
-
-$proto   = getprotobyname('tcp');
-socket(S, PF_INET, SOCK_STREAM, $proto)  || die "socket: $!";
-connect(S, $paddr)    || die "connect: $!";
-select(S); $| = 1; select(STDOUT);
-
-get_response_code(220);
-print S "EHLO $hostname\n";
-get_response_code(250);
-print S "MAIL FROM: cvsmailfilter\@$hostname\n";
-get_response_code(250);
-foreach $i (@mailto) {
-    print S "RCPT TO: $i\n";
-    get_response_code(250);
-}
-print S "DATA\n";
-get_response_code(354);
-print S "Subject:  $cvsargs\n";
-print S "\n";
-
-print S $message . "\n";
-print S ".\n";
-get_response_code(250);
-print S "QUIT\n";
-close(S);

CVSROOT/cvswrappers

@@ -1,23 +0,0 @@
-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-#  wildcard	[option value][option value]...
-#
-#  where option is one of
-#  -f		from cvs filter		value: path to filter
-#  -t		to cvs filter		value: path to filter
-#  -m		update methodology	value: MERGE or COPY
-#  -k		expansion mode		value: b, o, kkv, &c
-#
-#  and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'

CVSROOT/dolog.pl

@@ -1,270 +0,0 @@
-#! /tools/ns/bin/perl5
-
-use Socket;
-
-$username = $ENV{"CVS_USER"} || getlogin || (getpwuid($<))[0] || "nobody";
-$envcvsroot = $ENV{'CVSROOT'};
-$cvsroot = $envcvsroot;
-$flag_debug = 0;
-$flag_tagcmd = 0;
-$repository = '';
-$repository_tag = '';
-$mailhost = 'localhost';
-
-@mailto=();
-@changed_files = ();
-@added_files = ();
-@removed_files = ();
-@log_lines = ();
-@outlist = ();
-
-$STATE_NONE    = 0;
-$STATE_CHANGED = 1;
-$STATE_ADDED   = 2;
-$STATE_REMOVED = 3;
-$STATE_LOG     = 4;
-
-&process_args;
-
-if ($flag_debug ){
-    print STDERR "----------------------------------------------\n";
-    print STDERR "LOGINFO:\n";
-    print STDERR " pwd:" . `pwd` . "\n";
-    print STDERR " Args @ARGV\n";
-    print STDERR " CVSROOT: $cvsroot\n";                      
-    print STDERR " who: $username\n";                      
-    print STDERR " Repository: $repository\n";                      
-    print STDERR " mailto: @mailto\n";
-    print STDERR "----------------------------------------------\n";
-}
-
-if ($flag_tagcmd) {
-    &process_tag_command;
-} else {
-    &get_loginfo;
-    &process_cvs_info;
-}
-
-if( $flag_debug){
-    print STDERR "----------------------------------------------\n";
-    print STDERR @outlist;
-    print STDERR "----------------------------------------------\n";
-}
-
-&mail_notification;
-
-0;
-
-sub process_args {
-    while (@ARGV) {
-        $arg = shift @ARGV;
-
-        if ($arg eq '-d') {
-            $flag_debug = 1;
-            print STDERR "Debug turned on...\n";
-	} elsif ($arg eq '-r') {
-	    $cvsroot = shift @ARGV;
-        } elsif ($arg eq '-t') {
-	    $flag_tagcmd = 1;
-	    last;		# Keep the rest in ARGV; they're handled later.
-	} elsif ($arg eq '-h') {
-	    $mailhost = shift @ARGV;
-	} else {
-            push(@mailto, $arg);
-        }
-    }
-    if( $repository eq '' ){
-	open( REP, "<CVS/Repository");
-	$repository = <REP>;
-	chop($repository);
-	close(REP);
-    }
-    $repository =~ s:^$cvsroot/::;
-    $repository =~ s:^$envcvsroot/::;
-    
-    if (!$flag_tagcmd) {
-	if( open( REP, "<CVS/Tag") ) {
-	    $repository_tag = <REP>;
-	    chop($repository_tag);
-	    close(REP);
-	}
-    }
-}
-
-sub get_loginfo {
-
-    if( $flag_debug){
-        print STDERR "----------------------------------------------\n";
-    }
-
-    # Iterate over the body of the message collecting information.
-    #
-    while (<STDIN>) {
-        chop;			# Drop the newline
-
-        if( $flag_debug){
-            print STDERR "$_\n";
-        }
-
-        if (/^In directory/) {
-            next;
-        }
-
-        if (/^Modified Files/) { $state = $STATE_CHANGED; next; }
-        if (/^Added Files/)    { $state = $STATE_ADDED;   next; }
-        if (/^Removed Files/)  { $state = $STATE_REMOVED; next; }
-        if (/^Log Message/)    { $state = $STATE_LOG;     next; }
-
-        s/^[ \t\n]+//;		# delete leading whitespace
-        s/[ \t\n]+$//;		# delete trailing whitespace
-        
-        if ($state == $STATE_CHANGED) { push(@changed_files, split); }
-        if ($state == $STATE_ADDED)   { push(@added_files,   split); }
-        if ($state == $STATE_REMOVED) { push(@removed_files, split); }
-        if ($state == $STATE_LOG)     { push(@log_lines,     $_); }
-    }
-    
-    if( $flag_debug){
-        print STDERR "----------------------------------------------\n"
-                     . "changed files: @changed_files\n"
-                     . "added files: @added_files\n"
-                     . "removed files: @removed_files\n";
-        print STDERR "----------------------------------------------\n";
-    }
-
-}
-
-sub process_cvs_info {
-    local($d,$fn,$rev,$mod_time,$sticky,$tag,$stat,@d,$l,$rcsfile);
-    if (!open(ENT, "<CVS/Entries.Log" )) {
-	open(ENT, "<CVS/Entries");
-    }
-    $time = time;
-    while( <ENT> ){
-        chop;
-        ($d,$fn,$rev,$mod_time,$sticky,$tag) = split(/\//);
-        $stat = 'C';
-        for $i (@changed_files, "BEATME.NOW", @added_files ) {
-            if( $i eq "BEATME.NOW" ){ $stat = 'A'; }
-            if($i eq $fn ){
-                $rcsfile = "$envcvsroot/$repository/$fn,v";
-                if( ! -r $rcsfile ){
-                    $rcsfile = "$envcvsroot/$repository/Attic/$fn,v";
-                }
-                open(LOG, "/tools/ns/bin/rlog -N -r$rev $rcsfile |") 
-                        || print STDERR "dolog.pl: Couldn't run rlog\n";
-                while(<LOG>){
-                    if (/^date:.* author: ([^;]*);.*/) {
-                        $username = $1;
-                        if (/lines: \+([0-9]*) -([0-9]*)/) {
-                            $lines_added = $1;
-                            $lines_removed = $2;
-                        }
-                    }
-                }
-                close( LOG );
-                push(@outlist, ("$stat|$time|$username|$cvsroot|$repository|$fn|$rev|$sticky|$tag|$lines_added|$lines_removed\n"));
-            }
-        }
-    }
-    close(ENT);
-
-    for $i (@removed_files) {
-        push( @outlist, ("R|$time|$username|$cvsroot|$repository|$i|||$repository_tag\n"));
-    }
-
-    push (@outlist, "LOGCOMMENT\n");
-    push (@outlist, join("\n",@log_lines));
-    push (@outlist, "\n:ENDLOGCOMMENT\n");
-}
-
-
-sub process_tag_command {
-    local($str,$part,$time);
-    $time = time;
-    $str = "Tag|$cvsroot|$time";
-    while (@ARGV) {
-	$part = shift @ARGV;
-	$str .= "|" . $part;
-    }
-    push (@outlist, ("$str\n"));
-}
-	
-
-
-sub do_commitinfo {
-}
-
-
-
-
-sub get_response_code {
-    my ($expecting) = @_;
-#     if ($flag_debug) {
-# 	print STDERR "SMTP: Waiting for code $expecting\n";
-#     }
-    while (1) {
-	my $line = <S>;
-# 	if ($flag_debug) {
-# 	    print STDERR "SMTP: $line";
-# 	}
-	if ($line =~ /^[0-9]*-/) {
-	    next;
-	}
-	if ($line =~ /(^[0-9]*) /) {
-	    my $code = $1;
-	    if ($code == $expecting) {
-# 		if ($flag_debug) {
-# 		    print STDERR "SMTP: got it.\n";
-# 		}
-		return;
-	    }
-	    die "Bad response from SMTP -- $line";
-	}
-    }
-}
-	    
-    
-
-
-sub mail_notification {
-    chop(my $hostname = `/bin/hostname`);
-
-    my ($remote,$port, $iaddr, $paddr, $proto, $line);
-
-    $remote  = $mailhost;
-    $port    = 25;
-    if ($port =~ /\D/) { $port = getservbyname($port, 'tcp') }
-    die "No port" unless $port;
-    $iaddr   = inet_aton($remote)               || die "no host: $remote";
-    $paddr   = sockaddr_in($port, $iaddr);
-
-    $proto   = getprotobyname('tcp');
-    socket(S, PF_INET, SOCK_STREAM, $proto)  || die "socket: $!";
-    connect(S, $paddr)    || die "connect: $!";
-    select(S); $| = 1; select(STDOUT);
-
-    get_response_code(220);
-    print S "EHLO $hostname\n";
-    get_response_code(250);
-    print S "MAIL FROM: bonsai-daemon\@$hostname\n";
-    get_response_code(250);
-    foreach $i (@mailto) {
-	print S "RCPT TO: $i\n";
-	get_response_code(250);
-    }
-    print S "DATA\n";
-    get_response_code(354);
-    # Get one line starting with "354 ".
-    if ($flag_tagcmd) {
-	print S "Subject:  cvs tag in $repository\n";
-    } else {
-	print S "Subject:  cvs commit to $repository\n";
-    }
-    print S "\n";
-    print S @outlist, "\n";
-    print S ".\n";
-    get_response_code(250);
-    print S "QUIT\n";
-    close(S);
-}

CVSROOT/editinfo

@@ -1,21 +0,0 @@
-# The "editinfo" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

CVSROOT/loginfo

@@ -1,32 +0,0 @@
-# The "loginfo" file controls where "cvs commit" log information
-# is sent.  The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT.  If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter.  The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators.  The format
-# characters are:
-#
-#   s = file name
-#   V = old version number (pre-checkin)
-#   v = new version number (post-checkin)
-#
-ALL			$CVSROOT/CVSROOT/dolog.pl -h 127.0.0.1 -r /cvsroot bonsai-new-checkin-daemon@lounge.mozilla.org 
-ALL			$CVSROOT/CVSROOT/cvsmailfilter.pl -a -u http://bonsai.mozilla.org -r /cvsroot -s %s cvs-adds@mozilla.org
-mozilla/security	$CVSROOT/CVSROOT/cvsmailfilter.pl -u http://bonsai.mozilla.org -r /cvsroot -s %s mozilla-crypto-checkins@mozilla.org
-mozilla/extensions/psm-glue	$CVSROOT/CVSROOT/cvsmailfilter.pl -u http://bonsai.mozilla.org -r /cvsroot -s %s mozilla-crypto-checkins@mozilla.org
-mozilla/netwerk/security	$CVSROOT/CVSROOT/cvsmailfilter.pl -u http://bonsai.mozilla.org -r /cvsroot -s %s mozilla-crypto-checkins@mozilla.org
-mozilla/netwerk/protocol/http/src	$CVSROOT/CVSROOT/cvsmailfilter.pl -u http://bonsai.mozilla.org -r /cvsroot -s %s mozilla-crypto-checkins@mozilla.org
-mozilla/netwerk/socket/ssl	$CVSROOT/CVSROOT/cvsmailfilter.pl -u http://bonsai.mozilla.org -r /cvsroot -s %s mozilla-crypto-checkins@mozilla.org
-mozilla/netwerk/socket/tests	$CVSROOT/CVSROOT/cvsmailfilter.pl -u http://bonsai.mozilla.org -r /cvsroot -s %s mozilla-crypto-checkins@mozilla.org
-mozilla/webtools	$CVSROOT/CVSROOT/cvsmailfilter.pl -u http://bonsai.mozilla.org -r /cvsroot -s %s webtools-changed@warp.mcom.com
-CVSROOT		$CVSROOT/CVSROOT/cvsmailfilter.pl -u http://bonsai.mozilla.org -r /cvsroot -s %s -f modules cyeh@netscape.com leaf@netscape.com 

CVSROOT/modules

@@ -1,730 +0,0 @@
-# Three different line formats are valid:
-#	key	-a    aliases...
-#	key [options] directory
-#	key [options] directory files...
-#
-# Where "options" are composed of:
-#	-i prog		Run "prog" on "cvs commit" from top-level of module.
-#	-o prog		Run "prog" on "cvs checkout" of module.
-#	-e prog		Run "prog" on "cvs export" of module.
-#	-t prog		Run "prog" on "cvs rtag" of module.
-#	-u prog		Run "prog" on "cvs update" of module.
-#	-d dir		Place module in directory "dir" instead of module name.
-#	-l		Top-level directory only -- do not recurse.
-#
-# NOTE:  If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias.  An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module.  This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.
-
-######################################################################
-#
-# Module that contains the LEGAL and the LICENSE file. This should be
-# a part of every logical source pull for a component. Care should
-# be given so that this module is not specified twice for a given
-# source pull.
-#
-
-MozillaLicense -a \
-	mozilla/LEGAL \
-	mozilla/LICENSE
-
-Grendel -a \
-	MozillaLicense \
-	mozilla/grendel
-
-######################################################################
-#
-# Modules for the MozillaClassic Browser, based on the original 
-# layout engine. If you wish to develop on the Mozilla Classic
-# codebase, pull using these modules and using the branch tag
-# MozillaSourceClassic_19981026_BRANCH.
-# These modules should be considered obsolete.
-#
-
-MozillaSource -a \
-	MozillaSourceWin \
-	MozillaSourceMac \
-	MozillaSourceUnix
-
-MozillaSourceWin -a \
-	MozillaSourceCommon \
-	MozillaSourceWinOnly
-
-MozillaSourceMac -a \
-	MozillaSourceCommon \
-	MozillaSourceMacOnly
-
-MozillaSourceUnix -a \
-	MozillaSourceCommon \
-	MozillaSourceUnixOnly \
-	mozilla/cmd/xfe \
-	mozilla/cmd/gnomefe \
-	mozilla/cmd/qtfe \
-	mozilla/cmd/ybfe
-
-MozillaSourceMotif -a \
-	MozillaSourceCommon \
-	mozilla/cmd/xfe \
-	MozillaSourceUnixOnly
-
-MozillaSourceQtfe -a \
-	MozillaSourceCommon \
-	mozilla/cmd/qtfe \
-	MozillaSourceUnixOnly
-
-MozillaSourceGnomefe -a \
-	MozillaSourceCommon \
-	mozilla/cmd/gnomefe \
-	MozillaSourceUnixOnly
-
-MozillaSourceYbfe -a \
-	MozillaSourceCommon \
-	mozilla/cmd/ybfe \
-	MozillaSourceUnixOnly
-
-MozillaSourceCommon -a \
-	mozilla/LEGAL \
-	mozilla/LICENSE \
-	mozilla/base \
-	mozilla/build \
-	!mozilla/build/mac/client.mac \
-	mozilla/include \
-	mozilla/caps \
-	mozilla/jpeg \
-	mozilla/js \
-	mozilla/lib/htmldlgs \
-	mozilla/lib/layout \
-	mozilla/lib/libcnv \
-	mozilla/lib/libdom \
-	mozilla/lib/libi18n \
-	mozilla/lib/liblayer \
-	mozilla/lib/libmisc \
-	mozilla/lib/libmime \
-	mozilla/lib/libmocha \
-	mozilla/lib/libnet \
-	mozilla/lib/libparse \
-	mozilla/lib/libpics \
-	mozilla/lib/libpwcac \
-	mozilla/lib/libstyle \
-	mozilla/lib/mailto \
-	mozilla/lib/plugin \
-	mozilla/lib/xlate \
-	mozilla/lib/xp \
-	mozilla/modules/calendar \
-	mozilla/modules/edtplug/classes \
-	mozilla/modules/edtplug/src \
-	mozilla/modules/edtplug/include \
-	mozilla/modules/libfont/classes \
-	mozilla/modules/libfont/public \
-	mozilla/modules/libfont/src \
-	mozilla/modules/libhook \
-	mozilla/modules/libimg \
-	mozilla/modules/libnls \
-	mozilla/modules/libpref \
-	mozilla/modules/libreg \
-	mozilla/modules/libutil \
-	mozilla/modules/oji \
-	mozilla/modules/plugin \
-	mozilla/modules/progress/src \
-	mozilla/modules/rdf \
-	mozilla/modules/schedulr \
-	mozilla/modules/security/freenav \
-	mozilla/modules/softupdt/classes \
-	mozilla/modules/softupdt/include \
-	mozilla/modules/softupdt/src \
-	mozilla/modules/xml \
-	mozilla/modules/zlib/src \
-	mozilla/nav-java/stubs \
-	mozilla/network \
-	mozilla/nsprpub \
-	mozilla/privacy \
-	mozilla/xpcom \
-	mozilla/l10n \
-	mozilla/dbm \
-	mozilla/README
-
-MozillaSourceWinOnly -a \
-	mozilla/client.mak \
-	mozilla/cmd/makefile.win \
-	mozilla/cmd/wincom \
-	mozilla/cmd/winfe \
-	mozilla/config \
-	mozilla/lib/makefile.win \
-	mozilla/modules/coreincl \
-	mozilla/modules/edtplug/makefile.win \
-	mozilla/makefile.win \
-	mozilla/modules/libfont/jmcgen \
-	mozilla/modules/libfont/makefile.win \
-	mozilla/modules/libfont/producers/makefile.win \
-	mozilla/modules/libfont/producers/win \
-	mozilla/modules/libfont/producers/win/classes \
-	mozilla/modules/libfont/producers/win/classes/netscape \
-	mozilla/modules/libfont/producers/win/classes/netscape/fonts \
-	mozilla/modules/libfont/producers/win/src \
-	mozilla/modules/makefile.win \
-	mozilla/modules/progress/makefile.win \
-	mozilla/modules/progress/public \
-	mozilla/modules/security/makefile.win \
-	mozilla/modules/softupdt/makefile.win \
-	mozilla/modules/zlib/makefile.win \
-	mozilla/nav-java/makefile.win \
-	JavaStubWin
-
-MozillaSourceUnixOnly -a \
-	mozilla/.cvsignore \
-	mozilla/Makefile \
-	mozilla/Makefile.in \
-	mozilla/configure \
-	mozilla/configure.in \
-	mozilla/allmakefiles.sh \
-	mozilla/cmd/Makefile \
-	mozilla/cmd/Makefile.in \
-	mozilla/cmd/stubfe \
-	mozilla/cmd/unixfe \
-	mozilla/config/.cvsignore \
-	mozilla/config/AIX.mk \
-	mozilla/config/BSD_OS.mk \
-	mozilla/config/DGUX.mk \
-	mozilla/config/FreeBSD.mk \
-	mozilla/config/HP-UX.mk \
-	mozilla/config/IRIX.mk \
-	mozilla/config/Linux.mk \
-	mozilla/config/NCR.mk \
-	mozilla/config/NEC.mk \
-	mozilla/config/NEWS-OS.mk \
-	mozilla/config/NEXTSTEP.mk \
-	mozilla/config/NetBSD.mk \
-	mozilla/config/OSF1.mk \
-	mozilla/config/OpenBSD.mk \
-	mozilla/config/QNX.mk \
-	mozilla/config/Rhapsody.mk \
-	mozilla/config/SCOOS.mk \
-	mozilla/config/SINIX.mk \
-	mozilla/config/SunOS.mk \
-	mozilla/config/SunOS4.mk \
-	mozilla/config/SunOS5.mk \
-	mozilla/config/UNIXWARE.mk \
-	mozilla/config/common.mk \
-	mozilla/config/config.mk \
-	mozilla/config/coreconf.mk \
-	mozilla/config/rules.mk \
-	mozilla/config/Makefile \
-	mozilla/config/Makefile.in \
-	mozilla/config/autoconf.mk.in \
-	mozilla/config/bdate.c \
-	mozilla/config/bdate.pl \
-	mozilla/config/aboutime.pl \
-	mozilla/config/bsdecho.c \
-	mozilla/config/clobber_miss.pl \
-	mozilla/config/config.guess \
-	mozilla/config/cvsco.pl \
-	mozilla/config/fastcwd.pl \
-	mozilla/config/gtscc.c \
-	mozilla/config/makecopy.c \
-	mozilla/config/mangle.c \
-	mozilla/config/mantomak.c \
-	mozilla/config/mkdepend \
-	mozilla/config/mkdetect \
-	mozilla/config/nfspwd.pl \
-	mozilla/config/nodl.pl \
-	mozilla/config/nsinstall.c \
-	mozilla/config/outofdate.pl \
-	mozilla/config/pathsub.c \
-	mozilla/config/pathsub.h \
-	mozilla/config/pkg2dpth.pl \
-	mozilla/config/ports \
-	mozilla/config/revdepth.pl \
-	mozilla/config/set-timebomb.pl \
-	mozilla/config/sj.pl \
-	mozilla/lib/Makefile \
-	mozilla/lib/Makefile.in \
-	mozilla/modules/edtplug/Makefile \
-	mozilla/modules/edtplug/Makefile.in \
-	mozilla/modules/libfont/jmcgen \
-	mozilla/modules/libfont/Makefile \
-	mozilla/modules/libfont/Makefile.in \
-	mozilla/modules/libfont/producers/Makefile \
-	mozilla/modules/libfont/producers/Makefile.in \
-	mozilla/modules/Makefile \
-	mozilla/modules/Makefile.in \
-	mozilla/modules/progress/Makefile \
-	mozilla/modules/progress/Makefile.in \
-	mozilla/modules/progress/public \
-	mozilla/modules/security/Makefile \
-	mozilla/modules/security/Makefile.in \
-	mozilla/modules/softupdt/Makefile \
-	mozilla/modules/softupdt/Makefile.in \
-	mozilla/modules/zlib/Makefile \
-	mozilla/modules/zlib/Makefile.in \
-	mozilla/nav-java/Makefile \
-	mozilla/nav-java/Makefile.in \
-	mozilla/lib/mariner \
-	JavaStubUnix
-
-MozillaSourceMacOnly -a \
-	mozilla/config/mac \
-	mozilla/config/bdate.pl \
-	mozilla/config/aboutime.pl \
-	mozilla/config/mac-set-timebomb.pl \
-	mozilla/cmd/macfe \
-	mozilla/lib/mac/AutoAdmin \
-	mozilla/lib/mac/Includes \
-	mozilla/lib/mac/MacMemoryAllocator \
-	mozilla/lib/mac/Misc \
-	mozilla/lib/mac/MoreFiles \
-	mozilla/lib/mac/NSRuntime \
-	mozilla/lib/mac/NSStdLib \
-	mozilla/lib/mac/patches \
-	mozilla/lib/mac/PowerPlant \
-	mozilla/lib/mac/UserInterface \
-	mozilla/modules/coreincl \
-	mozilla/modules/edtplug/macbuild \
-	mozilla/modules/libfont \
-	mozilla/modules/progress/macbuild \
-	mozilla/modules/progress/public \
-	mozilla/modules/softupdt/macbuild \
-	mozilla/modules/zlib/macbuild \
-	mozilla/lib/mariner \
-	JavaStubMac
-
-JavaStubAll -a \
-	JavaStubWin \
-	JavaStubMac \
-	JavaStubUnix
-
-JavaStubCore -a \
-	mozilla/sun-java/stubs/include \
-	mozilla/sun-java/stubs/src
-
-JavaStubMac -a \
-	JavaStubCore \
-	mozilla/sun-java/stubs/macbuild \
-	mozilla/sun-java/stubs/macjri
-
-JavaStubUnix -a \
-	JavaStubCore \
-	mozilla/sun-java/Makefile \
-	mozilla/sun-java/Makefile.in \
-	mozilla/sun-java/stubs/jri \
-	mozilla/sun-java/stubs/Makefile \
-	mozilla/sun-java/stubs/Makefile.in
-
-JavaStubWin -a \
-	JavaStubCore \
-	mozilla/sun-java/makefile.win \
-	mozilla/sun-java/stubs/jri \
-	mozilla/sun-java/stubs/makefile.win
-
-######################################################################
-#
-# Modules for the raptor layout effort. Note that raptor dist is temporary
-# until raptor is integrated into the mainline build.
-#
-
-RaptorDoc -a \
-	mozilla/LICENSE \
-	mozilla/LEGAL \
-	mozilla/README/nglayout
-
-RaptorDist -a \
-	mozilla/configure.in \
-	mozilla/allmakefiles.sh \
-	mozilla/Makefile.in \
-	mozilla/makefile.win \
-	mozilla/build \
-	!mozilla/build/mac/client.mac \
-	mozilla/caps \
-	mozilla/config \
-	mozilla/dbm \
-	mozilla/editor \
-	mozilla/include \
-	mozilla/intl \
-	mozilla/jpeg \
-	JSClient \
-	mozilla/lib/liblayer \
-	mozilla/lib/libpwcac \
-	mozilla/lib/xp \
-	mozilla/modules/libimg \
-	mozilla/modules/libjar \
-	mozilla/modules/libpref \
-	mozilla/modules/libreg \
-	mozilla/modules/libutil \
-	mozilla/modules/oji \
-	mozilla/modules/plugin \
-	mozilla/modules/security/freenav \
-	mozilla/modules/zlib \
-	mozilla/nav-java \
-	mozilla/network \
-	mozilla/nsprpub \
-	mozilla/rdf \
-	mozilla/silentdl \
-	mozilla/sun-java \
-	mozilla/xpcom
-
-RaptorLayout -a \
-	mozilla/base \
-	mozilla/dom \
-	mozilla/gfx \
-	mozilla/expat \
-	mozilla/htmlparser \
-	mozilla/layout \
-	mozilla/view \
-	mozilla/webshell \
-	mozilla/widget
-
-Raptor -a \
-	RaptorDoc \
-	RaptorDist \
-	RaptorLayout
-
-RaptorWin -a \
-	Raptor
-
-RaptorUnix -a \
-	Raptor \
-	mozilla/aclocal.m4 \
-	mozilla/nglayout.mk
-
-RaptorMac -a \
-	Raptor \
-	mozilla/build/mac \
-	mozilla/cmd/macfe/applevnt \
-	mozilla/cmd/macfe/central \
-	mozilla/cmd/macfe/gui \
-	mozilla/cmd/macfe/include \
-	mozilla/cmd/macfe/pch \
-	mozilla/cmd/macfe/projects \
-	mozilla/cmd/macfe/utility \
-	mozilla/lib/mac/MacMemoryAllocator \
-	mozilla/lib/mac/Misc \
-	mozilla/lib/mac/MoreFiles \
-	mozilla/lib/mac/NSRuntime \
-	mozilla/lib/mac/NSStdLib \
-	mozilla/lib/mac/PowerPlant
-
-#####################
-# An all inclusive modules for tinderbox to use
-#####################
-
-RaptorAll -a \
-	RaptorWin \
-	RaptorUnix \
-	RaptorMac
-
-#####################
-# Transformiix module (xslt processor)
-#####################
-
-TransformiixStandalone -a \
-	mozilla/config \
-	mozilla/expat \
-	mozilla/extensions/transformiix
-
-#######################################################################
-# Modules for the Directory SDK.  There are two users of the libldap
-# Mozilla and the DirectorySDK. Maintained by Chuck Boatwright 
-# cboatwri@netscape.com
-#
-
-DirectorySDKSource -a \
-	DirectorySDKSourceCommon \
-	DirectorySDKSourceBuild
-
-DirectorySDKSourceC -a \
-	mozilla/directory/ldapsdk.mak \
-	mozilla/directory/ldapsdk.mk \
-	mozilla/directory/buildsdk.txt \
-	mozilla/directory/Makefile \
-	mozilla/directory/c-sdk
-
-DirectorySDKSourceJava -a \
-	mozilla/directory/buildjsdk.txt \
-	mozilla/directory/java-sdk
-
-DirectorySDKSourceCommon -a \
-	DirectorySDKSourceC \
-	DirectorySDKSourceJava
-
-DirectorySDKSourceBuild -a \
-	mozilla/config \
-	mozilla/nsprpub
-
-PerLDAP -a \
-	mozilla/directory/perldap
-
-#######################################################################
-# Modules for the Messenging Server SDK. Code maintained by Prasad Yendluri
-# (prasad@netscape.com)
-#
-
-MessagingSDK -a \
-	mozilla/msgsdk
-
-#######################################################################
-# Modules for Calendar client.
-# (spider@netscape.com)
-#
-
-CalendarClient -a \
-	mozilla/calendar \
-	mozilla/modules/calendar \
-	mozilla/htmlparser \
-	mozilla/gconfig \
-	mozilla/gfx \
-	mozilla/widget \
-	mozilla/xpfc \
-	mozilla/view
-
-#######################################################################
-# Modules for the JavaScript
-# (fur@netscape.com)
-#
-
-JSRef -a \
-	mozilla/js/src
-
-#
-# Can't pull all of js/src, because the server-style config filenames
-# are illegal on some operating systems.
-#
-JSClient -a \
-	mozilla/js/Makefile.in \
-	mozilla/js/makefile.win \
-	mozilla/js/macbuild \
-	mozilla/js/src \
-	mozilla/js/.cvsignore \
-	!mozilla/js/src/config \
-	!mozilla/js/src/editline \
-	!mozilla/js/src/liveconnect/config \
-	!mozilla/js/src/mininspr \
-	!mozilla/js/src/os \
-	!mozilla/js/src/perlconnect \
-	!mozilla/js/src/sh \
-	!mozilla/js/src/xpcom
-
-#######################################################################
-# Modules for SeaMonkey 
-# (5.0 Browser and 5.0 Mail/News based on nglayout)
-#
-# Initial wild ass guess: cyeh@netscape.com
-# Second guess: mcafee@netscape.com
-#
-# We might want to do the platform-specific stuff like:
-#   SeaMonkeyCoreFoo = SeaMonkeyCore + <stuff for platform Foo>
-# and so on, for each module.
-#
-
-NSPR -a \
-	mozilla/nsprpub
-
-SeaMonkeyCore -a \
-	mozilla/.cvsignore \
-	mozilla/README \
-	mozilla/client.mk \
-	mozilla/client.mak \
-	mozilla/configure \
-	mozilla/configure.in \
-	mozilla/allmakefiles.sh \
-	mozilla/Makefile.in \
-	mozilla/makefile.win \
-	mozilla/aclocal.m4 \
-	mozilla/build \
-	!mozilla/build/mac/client.mac \
-	mozilla/caps \
-	mozilla/config \
-	mozilla/dbm \
-	mozilla/db/.cvsignore \
-	mozilla/db/Makefile.in \
-	mozilla/db/makefile.win \
-	mozilla/db/mork \
-	mozilla/db/mdb \
-	mozilla/docshell \
-	mozilla/embedding \
-	mozilla/gc/boehm \
-	mozilla/include \
-	mozilla/intl \
-	mozilla/jpeg \
-	mozilla/js/jsd \
-	!mozilla/js/jsd/jsdb \
-	!mozilla/js/jsd/classes \
-	!mozilla/js/jsd/corba \
-	!mozilla/js/jsd/java \
-	!mozilla/js/jsd/javawrap \
-	JSClient \
-	mozilla/lib/mac/MacMemoryAllocator \
-	mozilla/lib/mac/Misc \
-	mozilla/lib/mac/MoreFiles \
-	mozilla/lib/mac/NSRuntime \
-	mozilla/lib/mac/NSStdLib \
-	mozilla/lib/mac/NSStartup \
-	mozilla/lib/mac/PowerPlant \
-	mozilla/lib/mac/InterfaceLib \
-	mozilla/lib/mac/embedding \
-	mozilla/modules/appfilelocprovider \
-	mozilla/modules/libimg \
-	mozilla/modules/libjar \
-	mozilla/modules/libpref \
-	mozilla/modules/libreg \
-	mozilla/modules/libutil \
-	mozilla/modules/mpfilelocprovider \
-	mozilla/modules/oji \
-	mozilla/modules/plugin \
-	mozilla/modules/security/freenav \
-	mozilla/modules/staticmod \
-	mozilla/modules/zlib \
-	mozilla/nav-java \
-	mozilla/network \
-	mozilla/netwerk \
-	mozilla/nglayout.mk \
-	mozilla/plugin/oji/MRJ \
-	mozilla/profile \
-	mozilla/rdf \
-	mozilla/string \
-	mozilla/sun-java \
-	mozilla/tools/leaky \
-	mozilla/tools/preloader \
-	mozilla/tools/elf-dynstr-gc \
-	mozilla/uriloader \
-	mozilla/xpcom \
-	mozilla/xpinstall \
-	MozillaLicense
-
-SeaMonkeyLayout -a \
-	SeaMonkeyCore \
-	mozilla/content \
-	mozilla/dom \
-	mozilla/gfx \
-	mozilla/htmlparser \
-	mozilla/layout \
-	mozilla/view \
-	mozilla/webshell \
-	mozilla/widget \
-	mozilla/expat
-
-SeaMonkeyXPToolKit -a \
-	SeaMonkeyLayout \
-	mozilla/themes \
-	mozilla/xpfe
-
-SeaMonkeyBrowser -a \
-	mozilla/directory/xpcom \
-	mozilla/editor/Makefile.in \
-	mozilla/editor/public \
-	mozilla/extensions \
-	SeaMonkeyXPToolKit
-
-# This needs work!
-SeaMonkeyMailNews -a \
-	SeaMonkeyLayout \
-	mozilla/mailnews \
-	!mozilla/mailnews/db/mdb \
-	!mozilla/mailnews/db/mork \
-
-SeaMonkeyEditor -a \
-	SeaMonkeyBrowser \
-	mozilla/editor \
-	mozilla/mailnews
-
-SeaMonkeyL10n -a \
-	mozilla/l10n/makefile.win \
-	mozilla/l10n/makefiles.all \
-	mozilla/l10n/Makefile.in \
-	mozilla/l10n/langpacks/makefile.win \
-	mozilla/l10n/langpacks/Makefile.in \
-	mozilla/l10n/langpacks/en-DE \
-	mozilla/l10n/langpacks/en-GB
-
-#############################################################
-# This module is the whole banana, and this
-# is the module that tinderbox and bonsai should 
-# track. 
-#
-# Right now Editor pulls Browser which pulls XPToolKit
-# which pulls Layout which pulls Core. But eventually,
-# there will be more differentiation and uniqueness so
-# All will need to contain more than Editor. Perhaps it 
-# will contain SeaMonkeyUnix, SeaMonkeyMac, SeaMonkeyWin
-# et cetera, et cetera, et cetera. But that is in the 
-# future. --sarah
-# 
-
-SeaMonkeyAll -a \
-	SeaMonkeyEditor \
-	SeaMonkeyL10n
-
-Blackwood -a \
-	mozilla/java
-
-SeaMonkeyBlackwood -a \
-	SeaMonkeyAll \
-	Blackwood
-
-#############################################################
-#
-# Alexander Larsson's GTK+ widget for embedding mozilla into
-# gtk applications.
-#
-#############################################################
-GtkMozilla -a \
-	mozilla/webshell/embed/gtk
-
-#############################################################
-#
-# Modules For Webtools
-#
-#############################################################
-Bugzilla -a \
-	mozilla/webtools/bugzilla
-Bonsai -a \
-	mozilla/webtools/bonsai
-LXR -a \
-	mozilla/webtools/lxr
-Tinderbox -a \
-	mozilla/webtools/tinderbox
-Webtools -a \
-	Bugzilla \
-	Bonsai \
-	LXR \
-	Tinderbox
-
-#############################################################
-#
-# Module for iPlanet Network Security Services
-#
-#############################################################
-NSS -a \
-	mozilla/security/nss \
-	mozilla/security/coreconf
-
-
-#############################################################
-#
-# Module for Mozilla Tinderbox
-#
-#############################################################
-MozillaTinderboxAll -a \
-	SeaMonkeyAll \
-        mozilla/security/psm \
-        mozilla/accessible \
-        mozilla/gfx2 \
-        mozilla/modules/libpr0n
-# commenting out NSS because the client uses a static tag so watching
-# checkins as they happen is of no use to us
-#	NSS \
-# commenting out NSPR because tinderbox is broken in such a way that
-# checkins to the branch (which we care about) do not show up but 
-# checkins do the tip (which we don't care about) do. Getting rid of
-# this so its not 100% false positives.
-#	NSPR \
-# same with ldap
-#	mozilla/directory/c-sdk
-

CVSROOT/notify

@@ -1,14 +0,0 @@
-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT.  If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"
-
-ALL	$CVSROOT/CVSROOT/sendnotification.pl %s

CVSROOT/passwd

@@ -1,373 +0,0 @@
-# DO NOT EDIT THIS FILE!  You must instead go to http://warp/mozilla.org, and
-# tweak things from there.
-aaronl%netscape.com:S0MUPohMWfaMo:cvsuser
-adu%sparc.spb.su:BVxm4vb76PPt6:cvsuser
-agulbra%troll.no:lETTiVluCyWos:cvsuser
-akhil.arora%sun.com:tG7tQfICukUNg:cvsuser
-akkana%netscape.com:/6KEK8AoMvE26:cvsuser
-alecf%netscape.com:xY/EzwiSEg43U:cvsuser
-alex.fritze%crocodile-clips.com:.qnz.iJA.rUaQ:cvsuser
-alexsavulov%netscape.com:NL.2.L.pOoEE.:cvsuser
-alla%lysator.liu.se:PfaCJJD7S/Vyc:cvsuser
-amardare%qnx.com:p3TTBfjz3CQ1A:cvsuser
-amusil%netscape.com:WOEqI48Qb5sRw:cvsuser
-anatoliya%netscape.com:gzzdCC45etLpk:cvsuser
-andreas.otte%debitel.net:kydQ2aAIGwhkA:cvsuser
-andrew%redhat.com:Q5vhhvO.ksq/E:cvsuser
-andreww%netscape.com:VDb/gyVOKB8gg:cvsuser
-ann.adamcik%sun.com:McRIlR2v7WMXQ:cvsuser
-ann.sunhachawee%eng.sun.com:acFpiClWrngnU:cvsuser
-anthonyd%netscape.com:3cZ8Ug3ggdAfE:cvsuser
-aoki%netscape.com:eU12jN9/L2XPw:cvsuser
-arielb%rice.edu:18fBUQf4tjW/Y:cvsuser
-arik%netscape.com:45a5ceCCif2A6:cvsuser
-arougthopher%lizardland.net:A/x64t5yyAkWE:cvsuser
-arshad%netscape.com:FdntM58EL9wNI:cvsuser
-asa%mozilla.org:KwQFH5YHrDGVw:cvsuser
-ashishbhatt%netscape.com:hAtS/UPSRHvCg:cvsuser
-ashuk%eng.sun.com:QrgopBbFpT10Y:cvsuser
-attinasi%netscape.com:KQdxTI4aFdReA:cvsuser
-av%netscape.com:GZ3mu2MifoZiU:cvsuser
-axel%pike.org:mbSWqS64YZTQw:cvsuser
-badami%netscape.com:QOtHQUuVx8I/g:cvsuser
-bae%sparc.spb.su:Q2qzYOL6zE5.I:cvsuser
-bbaetz%student.usyd.edu.au:JhmLaLDTsT/h2:cvsuser
-beard%netscape.com:2Eed7KIBNPtL6:cvsuser
-ben%netscape.com:7l9euazKDQhxk:cvsuser
-bernd.mielke%snafu.de:diOpGSeH3syIs:cvsuser
-bhart00%yahoo.com:I8ZZbYIQL/1O2:cvsuser
-bienvenu%netscape.com:dzcEj09V1HQLg:cvsuser
-bishakhabanerjee%netscape.com:bLgNOlaDbR.lc:cvsuser
-bjorn%netscape.com:AXNpUjWR2SG7w:cvsuser
-blakeross%telocity.com:iecsxCayirMQw:cvsuser
-blizzard%redhat.com:W86ZbnavsJzxk:cvsuser
-blythe%netscape.com:UXnssIXpwUtBU:cvsuser
-bmartin%netscape.com:VDvmT5ew0s2Uk:cvsuser
-bnesse%netscape.com:.a3I0OvXR0BaQ:cvsuser
-bobj%netscape.com:7.JSRfZiKATA2:cvsuser
-braddr%puremagic.com:Tzs8cIqrzzC/I:cvsuser
-brade%netscape.com:ouetdVzWLzsWs:cvsuser
-bratell%lysator.liu.se:GLG2cm83vaqBk:cvsuser
-brendan%mozilla.org:q5aR3MqARGBMA:cvsuser
-briane%qnx.com:pKLtqULcssSZo:cvsuser
-bruce%cubik.org:.VcS8pxE3d5rQ:cvsuser
-bryner%netscape.com:gy5stVpStoVNw:cvsuser
-bsharma%netscape.com:vjlb1xJC7MsAk:cvsuser
-bstell%ix.netcom.com:/ZdK7gz9SA/RU:cvsuser
-bzbarsky%mit.edu:5I5AsEAEWysaE:cvsuser
-carl.wong%intel.com:60H5NoMHeEpvI:cvsuser
-cathleen%netscape.com:g4oBIcfbxZzt.:cvsuser
-cavin%netscape.com:.z6/IPC/6uaFo:cvsuser
-cbiesinger%web.de:SmMxtOg6tGNJg:cvsuser
-ccarlen%netscape.com:KYg00rzfYX4vs:cvsuser
-chak%netscape.com:muP/8gmdIYQgM:cvsuser
-chofmann%netscape.com:cz7t9v10f9566:cvsuser
-Chris.Yeh%nokia.com:98WX9EeAZIt/6:cvsadm
-chrisk%netscape.com:iAECHtKFagLSw:cvsuser
-chuang%netscape.com:fLaH9mJOJ5IE.:cvsuser
-claudius%netscape.com:gJezy23y0r4wI:cvsuser
-cls%seawood.org:YLAr7ajnaXezg:cvsuser
-cltbld%netscape.com:mla4CZgCloBSU:cvsuser
-cmanske%netscape.com:wZ2fFz6Y4JIkk:cvsuser
-colin%theblakes.com:1fbT0DKTKXTsk:cvsuser
-colinp%oeone.com:o4A5a8g5U/tO2:cvsuser
-cotter%netscape.com:JZ1rqINZKa.Ig:cvsuser
-curt%netscape.com:qV4ICuSHeRnOw:cvsuser
-dac%x.cx:xZwzT4et.TSYY:cvsuser
-Dale.Stansberry%Nexwarecorp.com:iFmg8YUyFSpA.:cvsuser
-danm%netscape.com:3h6FdkzmMqnyA:cvsuser
-darin%netscape.com:BFlqb/kSuCdKo:cvsuser
-dbaron%fas.harvard.edu:z3R2dyupEH6yk:cvsuser
-dbradley%netscape.com:EOOl4wp9MNcU6:cvsuser
-dbragg%netscape.com:k34vc.FRrLRYI:cvsuser
-dcone%netscape.com:dWcV1sBlGlAHU:cvsuser
-ddrinan%netscape.com:4vs6JokcLeYkQ:cvsuser
-dean.jackson%cmis.csiro.au:CP7hJzztTs3Es:cvsuser
-dean_tessman%hotmail.com:AM2BZ7M0nDhlM:cvsuser
-depstein%netscape.com:nMGeNsPMko07s:cvsuser
-despotdaemon%netscape.com:zJJgZOGMRo/FE:cvsadm
-dianesun%netscape.com:xSYSoEpExmrLU:cvsuser
-dinglis%qnx.com:ox85zqaZiiSk6:cvsuser
-dkl%redhat.com:Jb37f1UZbg4g2:cvsuser
-dmose%mozilla.org:sTIo1zYddteQc:cvsadm
-dmose%netscape.com:kskyAAnpkNv6c:cvsadm
-don%netscape.com:WNOsUIYwq8aSw:cvsuser
-donley%tekka.wwa.com:ZdWwac/UPNyG.:cvsuser
-donm%bluemartini.com:bKHsN8gBK/fp2:cvsuser
-dougt%netscape.com:6Dpld8jLb0Mcg:cvsuser
-dp%netscape.com:jt.S0eDMnQVDo:cvsuser
-dprice%netscape.com:rGU08EfoiqRFk:cvsuser
-dr%sleepy.at:vG1uOW9SKYi0o:cvsuser
-drapeau%eng.sun.com:c3eJX2LEODkpI:cvsuser
-drepper%cygnus.com:p/CH9PcK4BRCs:cvsuser
-driehuis%playbeing.org:BbR6IahGk6yGc:cvsuser
-dsirnapalli%netscape.com:hbQy6f/ZU4m7o:cvsuser
-ducarroz%netscape.com:B9ih04P7FDhrg:cvsuser
-duncan%be.com:Y6cnDOpZS9W0.:cvsuser
-dveditz%netscape.com:S1X7iuOVZr0tI:cvsuser
-dwhoward%earthling.net:Fll3t.CIpLlCU:cvsuser
-edburns%acm.org:z7zqfOtPH9oic:cvsuser
-eddyk%netscape.com:dwAKpPCedFZos:cvsuser
-edwin%woudt.nl:8dZB6Qv1GFw4E:cvsuser
-endico%mozilla.org:yXO.M/SUdhzAc:cvsadm
-eric%droidlogic.com:G0SdDP5pMwVew:cvsuser
-ericb%neoplanet.com:D63L651L6w.a2:cvsuser
-erik%netscape.com:.yO3dSzx4Ixf.:cvsuser
-exv%randomc.com:TuqUP2cz/Q0gU:cvsuser
-eyork%netscape.com:VrUopS3iDoSJc:cvsuser
-friedman%splode.com:mZ5UQ4/qb5h3E:cvsadm
-ftang%netscape.com:cjA4Oe7qangyQ:cvsuser
-gagan%netscape.com:aJDYc91m7tmpI:cvsuser
-gayatrib%netscape.com:ELHSlB.ndtTwI:cvsuser
-german%netscape.com:vDZXBxE0m3/5w:cvsuser
-gerv%gerv.net:/3awrKKpfLPvQ:cvsuser
-girish.manwani%eng.sun.com:0Nm63TloVl5Rw:cvsuser
-glazman%netscape.com:voZRrCYpgF9AU:cvsuser
-glen.beasley%sun.com:Bg3n.ccr13OvI:cvsuser
-gordon%netscape.com:MCComT.xg8/GM:cvsuser
-grail%cafebabe.org:KsBL5nzVbWFC6:cvsuser
-granrose%netscape.com:xndKEgLhYUUUY:cvsuser
-guru%startrek.com:FeXuLzEvXT132:cvsuser
-hangas%netscape.com:jKdYm.LiDEW2c:cvsuser
-harish%netscape.com:6NzUiwHrF2piQ:cvsuser
-harishd%netscape.com:A0zdbDQ36sqs.:cvsuser
-heikki%netscape.com:52AbDkgxmkRfY:cvsuser
-hewitt%netscape.com:pE1RTplEofSd2:cvsuser
-hong.lu%eng.sun.com:ub28mE.N622oQ:cvsuser
-hwaara%chello.se:74eCB7AZi/Bm2:cvsuser
-hyatt%netscape.com:/Sepj5wnpvupA:cvsuser
-ian.mcgreer%sun.com:86YhVbbpm8aZ2:cvsuser
-ian%hixie.ch:nibu2mA5/kgco:cvsuser
-idk%eng.sun.com:hGFoMfxrF7eCM:cvsuser
-igor%mir2.org:MM9XCaPQ9hSyA:cvsuser
-inaky.gonzalez%intel.com:S7JSies.2wToc:cvsuser
-inn%sparc.spb.su:YAofF66Hjffik:cvsuser
-jab%atdot.org:EQ0cIL6giNkWw:cvsuser
-jaggernaut%netscape.com:JfxrrkZerNZv.:cvsuser
-jake%acutex.net:mjldF4ES.KxbI:cvsuser
-janc%netscape.com:Cv4z.zALqxr1M:cvsuser
-jar%netscape.com:kgQFLFiUh0hoc:cvsuser
-jat%princeton.edu:0P0EK1s5q3OCk:cvsuser
-javi%netscape.com:WkJc6UpXUyLVw:cvsuser
-jayashri.visvanathan%sun.com:7fdqZHWKclkck:cvsuser
-jband%netscape.com:jc1KB4qvBDWxE:cvsuser
-jcgriggs%sympatico.ca:hQ/ITeFfitEvw:cvsuser
-jdunn%netscape.com:nwle/bqcCtTMA:cvsuser
-jeff.dyer%compilercompany.com:O.dwVxqCyvmqQ:cvsuser
-jelwell%netscape.com:phAeFbVmVsIFg:cvsuser
-Jerry.Kirk%Nexwarecorp.com:iSvw9A.T6nH6w:cvsuser
-jfrancis%netscape.com:n8gH7es/9NB6U:cvsuser
-jg%meer.net:gimPrIwXcAep2:cvsuser
-jgaunt%netscape.com:bwZbPN1gYEnPo:cvsuser
-jglick%netscape.com:MW7f8SLLptnEw:cvsuser
-jgmyers%netscape.com:tj/q7ALULIlLM:cvsuser
-jhuntley%julian.uwo.ca:0Kp/QUcK6Vb26:cvsuser
-jimmylee%netscape.com:QRGr4KRc3Bjvc:cvsuser
-jim_nance%yahoo.com:MW2pItooimXQc:cvsuser
-jj%netscape.com:Slemj8mwbIPao:cvsadm
-jkeiser%netscape.com:7BrSo3.f8G5Gw:cvsuser
-jmas%softcatala.org:PmaWVAdMzkM7A:cvsuser
-joe.chou%sun.com:peT1nWrch0xGo:cvsuser
-John.Wilson%Nexwarecorp.com:hfzTdvMI7KleY:cvsuser
-joki%netscape.com:MnZq0Nx3SCImc:cvsuser
-jonas.utterstrom%vittran.norrnod.se:Yq1pP.nR9EEcY:cvsuser
-jpierre%netscape.com:2ebjC0cACURyU:cvsuser
-jrgm%netscape.com:3ix9Y5PU9Qruw:cvsuser
-jruderman%hmc.edu:g7P13IEb8ACms:cvsuser
-jshin%mailaps.org:j6/TcPcy/KYgg:cvsuser
-jst%netscape.com:ry1WSdsxrYVhg:cvsuser
-jsun%netscape.com:coq.3Xx7ARTjs:cvsuser
-justdave%syndicomm.com:gH/q.1W.wLBGQ:cvsuser
-jwz%mozilla.org:OdVBvbcKAZC5c:cvsuser
-kaie%netscape.com:.hgVIsvtes.Fw:cvsuser
-karnaze%netscape.com:C.H2iRqFy7CnY:cvsuser
-katakai%japan.sun.com:qJPfrx26UNm2.:cvsuser
-kbaker%eb.com:jQBbk4NHGcX0I:cvsuser
-kestes%walrus.com:5Ld0f8MhzQggw:cvsuser
-kevin%perldap.org:OR9AnICPijq1g:cvsuser
-khanson%netscape.com:WVNkDvKD8Fx/Q:cvsuser
-kin%netscape.com:RexUJ7MbhHOeE:cvsuser
-kirk.erickson%sun.com:2ju/p7xptfkFQ:cvsuser
-kmcclusk%netscape.com:KiXYwpHlCP1nE:cvsuser
-koehler%mythrium.com:0vfTLcKn6XhV6:cvsuser
-kvisco%ziplink.net:7u.twuUBsFGJA:cvsuser
-laa%sparc.spb.su:xaXKTqerGGoxE:cvsuser
-law%netscape.com:QQU7Gc4FME9Ek:cvsuser
-leaf%mozilla.org:u8bmgbEVjQQ6k:cvsadm
-leaf%netscape.com:mpuxvp6/BLA02:cvsuser
-leif%ogre.com:T8QO0FEdoLHd2:cvsuser
-leila.garin%eng.sun.com:Cz4LcsTHYzTwk:cvsuser
-loadrunner%betak.net:IUk5X6IaJ5fTM:cvsuser
-locka%iol.ie:Odt22ztoqh7Pc:cvsuser
-lordpixel%mac.com:5d2.szagWZ00M:cvsuser
-louis.martin%eng.sun.com:QsJ91Lm0/Y/0Y:cvsuser
-lpham%netscape.com:E06CUoNSPOyqg:cvsuser
-lsv%sparc.spb.su:owGMQKmCe2l1M:cvsuser
-malini%eng.sun.com:V9F6kZpJe8HNc:cvsuser
-mang%subcarrier.org:VuSc/CvF/y94A:cvsuser
-manpreet.singh%sun.com:BWz7bfdfwrbEI:cvsuser
-maolson%earthlink.net:k1eI.1dDx/fkI:cvsuser
-margaret.chan%sun.com:W3v8XaNRwpmZY:cvsuser
-martinl%netscape.com:AeYccd2rbGj7.:cvsuser
-matt%netscape.com:HV1zrCvpyT7Mk:cvsuser
-matthias%sorted.org:OzME313V9XMNo:cvsuser
-matty%chariot.net.au:c/z7/vNQ/Vv1I:cvsuser
-mbarnson%sisna.com:hRMbA3bW5q6Ak:cvsuser
-mcafee%netscape.com:Y/0zK7Dff2W8.:cvsadm
-mcs%netscape.com:1K9aYq1ivwd6s:cvsuser
-mhammond%skippinet.com.au:T1kpFNZuhvQ0I:cvsuser
-mhein%sun.com:zDB.Gdg/nMOq6:cvsuser
-Michael.Kedl%Nexwarecorp.com:/vumJNxEIWQnk:cvsuser
-michael.lowe%bigfoot.com:SUFJXqQg3gpwo:cvsuser
-michaelp%meer.net:jB2yR8pV9vSN2:cvsuser
-mike+mozilla%meer.net:3rKv1ZMBpeR36:cvsuser
-mike%neoplanet.com:BXgJNsh4IWFgQ:cvsuser
-mike%wynholds.com:P8iDbiX0p6xzQ:cvsuser
-mikep%oeone.com:fxxKFOIsaxlQs:cvsuser
-miodrag%netscape.com:6t6mBrr0.woK6:cvsuser
-mitchf%netscape.com:SpJhZNzzTZL5E:cvsuser
-mitesh%netscape.com:i.sMzCUWtOLIA:cvsuser
-mj%digicool.com:.QcUkkqXQe9kE:cvsuser
-mjudge%netscape.com:jBw1nVC8B7WBc:cvsuser
-mkaply%us.ibm.com:7AlaMZqXustsg:cvsuser
-momoi%netscape.com:cTHpmapFPYprI:cvsuser
-morse%netscape.com:1f8Ob4wB7JJ5I:cvsuser
-mostafah%oeone.com:DaYs.xDcUaa72:cvsuser
-mozilla.BenB%bucksch.org:7/oOTh8e41HmY:cvsuser
-msanz%netscape.com:llz7R0dXZuYhg:cvsuser
-mscott%netscape.com:dHLGTClZyMWG6:cvsuser
-mstoltz%netscape.com:4Ddf36CZMroWw:cvsuser
-msw%gimp.org:KB4CGqyGWzK5w:cvsuser
-mwyner%ogre.com:YTb.PSMPtP7Sw:cvsuser
-myk%mozilla.org:18.V6xy5IQ3Fc:cvsadm
-m_kato%ga2.so-net.ne.jp:FoloD5kECUuTo:cvsuser
-namachi%netscape.com:zKBxsBBzgM18s:cvsuser
-naving%netscape.com:TqK9Ipga8KNA6:cvsuser
-nboyd%atg.com:hbKSEw6zIzn8A:cvsuser
-neeti%netscape.com:q2ekT3ZhwHrKg:cvsuser
-nelsonb%netscape.com:AVyk3HXWf.ujs:cvsuser
-newt%pobox.com:OZl987F6kbJt2:cvsuser
-nhotta%netscape.com:7PCA6ZeTK24HQ:cvsuser
-nicolson%netscape.com:NbXo/Njwl3DYE:cvsuser
-nis%sparc.spb.su:qaN5w8ws/GMOI:cvsuser
-nisheeth%netscape.com:e69IbM7hbpN1c:cvsuser
-nitinp%netscape.com:k5DQngWmCXDCs:cvsuser
-nsaini%netscape.com:odh8juPJDmNHY:cvsuser
-oeschger%netscape.com:VbgM7ZeTrBdQc:cvsuser
-pavel%gingerall.cz:m.6fruuSee/fA:cvsuser
-pavlov%netscape.com:Wm/3gCaQhXNLo:cvsuser
-paw%netscape.com:ICTEEvGvrow86:cvsuser
-pchen%netscape.com:KtnZrWgBfSi/Y:cvsuser
-pete%alphanumerica.com:8I2QCUKNKooqA:cvsuser
-peterb%oeone.com:TxT4Q17V0YIp6:cvsuser
-peterl%netscape.com:8x3YXhSeI77Sc:cvsuser
-peterlubczynski%netscape.com:kSPTyFx/Yg.0M:cvsuser
-peterv%netscape.com:tknmYRfnctNHY:cvsuser
-petitta%netscape.com:4cZ7bPpdZU2Mo:cvsuser
-pierre%netscape.com:/6xa.CBcV07tE:cvsuser
-pinkerton%netscape.com:SXjRJmDJDtb1U:cvsuser
-pnunn%netscape.com:VjAEnG0V6mLLY:cvsuser
-pp%ludusdesign.com:G0MYIuYvwPznk:cvsuser
-prass%netscape.com:FR60OL5/QxDWQ:cvsuser
-pschwan%cmu.edu:UDRUgnwe0.8YM:cvsuser
-pschwartau%netscape.com:MEim3s/EIZWs6:cvsuser
-putterman%netscape.com:CRfRGZi9Nrtg6:cvsuser
-quy%igelaus.com.au:x9H1aMz3jpYUA:cvsuser
-racham%netscape.com:G3oNVDE5uCV0o:cvsuser
-radha%netscape.com:E8m/i8B0sIO5k:cvsuser
-ramiro%eazel.com:04T/4Hcs1Yr/c:cvsadm
-rangansen%netscape.com:cLfMytTA8Q.aY:cvsuser
-rayw%netscape.com:tnMNnv234muWY:cvsuser
-rbs%maths.uq.edu.au:2urVlBcTziPaA:cvsuser
-rcassin%supernova.org:LN6o5SKL3Eh3E:cvsuser
-rchen%netscape.com:aur8LEiFViHB2:cvsuser
-rdayal%netscape.com:wS397S9STmKn6:cvsuser
-realpeterv%mac.com:03s6xSCMxEKx.:cvsuser
-relyea%netscape.com:SnAaVLpexLWKw:cvsuser
-rginda%netscape.com:TRTBrAIOV/zck:cvsuser
-rhess%engr.sgi.com:ARe9YxMtWywa2:cvsuser
-rich.burridge%sun.com:ZNt/CGSk1djmE:cvsuser
-rjc%netscape.com:RVRRe0F5Be03c:cvsuser
-rjesup%wgate.com:5Ccmc2hO67zAk:cvsuser
-rko%netscape.com:erIlm8Cr.fpeM:cvsadm
-robinf%netscape.com:qsizhSBd/KLxw:cvsuser
-roc+%cs.cmu.edu:T9D7Sx1LV49k6:cvsuser
-rods%netscape.com:0IcCge9UaI6V6:cvsuser
-rogc%netscape.com:ggq89u2RGdGyc:cvsuser
-rogerl%netscape.com:EOrmrYUfmdcOk:cvsuser
-rpotts%netscape.com:S0L.1Z15bd0qA:cvsuser
-rth%cygnus.com:PgrJbhkbkSaXM:cvsuser
-ruslan%netscape.com:D.VKkgUzl9qmo:cvsuser
-rusty.lynch%intel.com:DhYR6Z5RXyqSk:cvsuser
-rweltman%netscape.com:sXP4ymRl/iKBg:cvsuser
-saari%netscape.com:8QO4pF72fYVFo:cvsuser
-samuel%sieb.net:UyA4IG.2.LceA:cvsuser
-scc%mozilla.org:rSANuSFML82vc:cvsuser
-scosta%julian.uwo.ca:S.NZiK1hVwS.Q:cvsuser
-sdagley%netscape.com:PvYFZiRMRKuG.:cvsuser
-sdv%sparc.spb.su:o7qyUidRy0Ixw:cvsuser
-sean%beatnik.com:PUH1uLgUkOHK6:cvsuser
-seawood%netscape.com:NoNERGlI7IujM:cvsuser
-selmer%netscape.com:0a0Zn2Mtb9RMM:cvsuser
-sep%sparc.spb.su:VkGBO1LZNqmcE:cvsuser
-serge%netscape.com:.fjhetVN42Gtc:cvsuser
-seth%cs.brandeis.edu:NZh2SXUWQwca2:cvsuser
-sford3%swbell.net:qiBgt92c4q9VE:cvsuser
-sfraser%netscape.com:2mFWUaEqjN7lE:cvsuser
-sgehani%netscape.com:6GHPo3hAIJqxg:cvsuser
-shanjian%netscape.com:QB8g/ScTxKRkI:cvsuser
-shannond%netscape.com:oMNCZEJ1DPSKc:cvsuser
-shaver%mozilla.org:I4.grysVnENVM:cvsadm
-shawnp%earthling.net:Nkv1/z1WuxbSc:cvsuser
-sherry.shen%sun.com:NsxfPnTNAkIiA:cvsuser
-shliang%netscape.com:KO.gzVLb9PrLU:cvsuser
-shrutiv%netscape.com:3Ve5mvMx.Ze1M:cvsuser
-sicking%bigfoot.com:HmAX9bYyCA47k:cvsuser
-sman%netscape.com:gHR2VdSKyaV0Q:cvsuser
-smeredith%netscape.com:y4A/cyjrQKlq6:cvsuser
-smontagu%netscape.com:GR7KUGsPjdY/6:cvsuser
-sonja.mirtitsch%sun.com:wchMbWjVfFXxM:cvsuser
-srilatha%netscape.com:vn.P0HO0ippg2:cvsuser
-srinivas%netscape.com:S7u05VkFOtTeQ:cvsuser
-sspitzer%netscape.com:JlQHq8F/C8kV6:cvsuser
-ssu%netscape.com:cfNlpxCKVXQtQ:cvsuser
-stephend%netscape.com:MPo74xU9kvo/M:cvsuser
-stever%netscape.com:veCWvWkeusc5o:cvsuser
-subbarao%computer.org:7JjQ.DwpYmX5U:cvsuser
-suresh%netscape.com:XUIUMLGJA3RZ2:cvsuser
-svn%xmlterm.org:jJ1wJYK5mkg5M:cvsuser
-syd%netscape.com:CUkm3PbBnrIsk:cvsuser
-taek%netscape.com:7oZpC0ix52epo:cvsuser
-tajima%eng.sun.com:/sI8qG0LRP1mk:cvsuser
-taka%netscape.com:jPPzAmrbNd1wg:cvsuser
-talisman%anamorphic.com:KB7aseh1Ssuyg:cvsuser
-tao%netscape.com:gM5BUf7j12EIc:cvsuser
-tara%tequilarista.org:tVcSLekcNJsk2:cvsuser
-tcrowe%netscape.com:mq7wUMii.8yag:cvsuser
-terry%mozilla.org:sYyehWIbexkrI:cvsadm
-tfox%netscape.com:tQPZKESPZltZ2:cvsuser
-tgl%sss.pgh.pa.us:rr7pe1GPkjIw6:cvsuser
-thayes%netscape.com:CLgsFPZnRpuhM:cvsuser
-thesteve%netscape.com:35.Khy1IDl2VE:cvsuser
-timeless%mac.com:oJ1sqLvoXLp7I:cvsuser
-tingley%sundell.net:dJuhpDRtS9J..:cvsuser
-tonyr%fbdesigns.com:B1mFZmEmKdg4E:cvsuser
-tor%cs.brown.edu:.GLVprG/lOpjM:cvsuser
-toshok%hungry.com:45BYKXpLObZ..:cvsuser
-troy%netscape.com:Vr9m0vnQR52kY:cvsuser
-trudelle%netscape.com:kguEx2XoA/qOQ:cvsuser
-val4%cornell.edu:.MA49sSDjYK66:cvsuser
-valeski%netscape.com:UQIy1R23X0tnc:cvsuser
-varada%netscape.com:/PHzlvLt1d/Pk:cvsuser
-varga%utcru.sk:itS5ZJXFiEJC2:cvsuser
-vidur%netscape.com:QSvSExpE4HwEE:cvsuser
-waldemar%netscape.com:hrfmZUyM.cQqw:cvsuser
-warren%zodiacnetworks.com:b0lSiwRxkyoKE:cvsuser
-waterson%netscape.com:UMOoIwsZgkNEM:cvsuser
-wtc%netscape.com:qv4XOpmSQjJG2:cvsuser
-Xiaobin.Lu%eng.Sun.com:MrrYDdtVNWvV6:cvsuser
-yixiong.zou%intel.com:O30ptkPuaOOrY:cvsuser
-yokoyama%netscape.com:zC32qkz2JNuTc:cvsuser
-yueheng.xu%intel.com:oRvjQhWXcyCIU:cvsuser
-zach%zachlipton.com:GLozolSujiqSo:cvsuser
-zuperdee%yahoo.com:ltcWrFvUEUYTY:cvsuser

CVSROOT/rcsinfo

@@ -1,13 +0,0 @@
-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/sendnotification.pl

@@ -1,78 +0,0 @@
-#! /tools/ns/bin/perl5
-
-use Socket;
-
-sub get_response_code {
-    my ($expecting) = @_;
-#     if ($flag_debug) {
-# 	print STDERR "SMTP: Waiting for code $expecting\n";
-#     }
-    while (1) {
-	my $line = <S>;
-# 	if ($flag_debug) {
-# 	    print STDERR "SMTP: $line";
-# 	}
-	if ($line =~ /^[0-9]*-/) {
-	    next;
-	}
-	if ($line =~ /(^[0-9]*) /) {
-	    my $code = $1;
-	    if ($code == $expecting) {
-# 		if ($flag_debug) {
-# 		    print STDERR "SMTP: got it.\n";
-# 		}
-		return;
-	    }
-	    die "Bad response from SMTP -- $line";
-	}
-    }
-}
-
-my @mailto;
-my $i;
-foreach $i (@ARGV) {
-    # Deal with our "%" encoding of email addresses.
-    if ($i !~ /\@/) {
-	$i =~ s/%/\@/;
-    }
-    push(@mailto, $i);
-}
-    
-chop(my $hostname = `/bin/hostname`);
-
-my ($remote,$port, $iaddr, $paddr, $proto, $line);
-
-$remote  = $mailhost;
-$port    = 25;
-if ($port =~ /\D/) { $port = getservbyname($port, 'tcp') }
-die "No port" unless $port;
-$iaddr   = inet_aton($remote)               || die "no host: $remote";
-$paddr   = sockaddr_in($port, $iaddr);
-
-$proto   = getprotobyname('tcp');
-socket(S, PF_INET, SOCK_STREAM, $proto)  || die "socket: $!";
-connect(S, $paddr)    || die "connect: $!";
-select(S); $| = 1; select(STDOUT);
-
-get_response_code(220);
-print S "EHLO $hostname\n";
-get_response_code(250);
-print S "MAIL FROM: cvs-notify-daemon\@$hostname\n";
-get_response_code(250);
-foreach $i (@mailto) {
-    print S "RCPT TO: $i\n";
-    get_response_code(250);
-}
-print S "DATA\n";
-get_response_code(354);
-# Get one line starting with "354 ".
-print S "Subject: CVS notification\n";
-print S "To: " . join(',', @mailto) . "\n";
-print S "\n";
-while (<STDIN>) {
-    print S $_;
-}
-print S ".\n";
-get_response_code(250);
-print S "QUIT\n";
-close(S);

CVSROOT/taginfo

@@ -1,20 +0,0 @@
-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4->  file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/verifymsg

@@ -1,21 +0,0 @@
-# The "verifymsg" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

buildtools/os2/source/nsinstall/nsinstall.c

@@ -1,727 +0,0 @@
-/*
- * The nsinstall command for OS/2
- *
- * Our gmake makefiles use the nsinstall command to create the
- * object directories or installing headers and libs to ns/dist.
- * The shmsdos shell has nsinstall as a built-in command.  However,
- * if we use another shell like MKS toolkit's sh, we need to have
- * the nsinstall command separately.
- *
- * This file was generated by modifying the Windows nsinstall.c.
- *
- * To build, say
- *     icc nsinstall.c
- */
-
-#include <direct.h>
-#include <stdio.h>
-#include <string.h>
-#include <assert.h>
-#define INCL_DOSFILEMGR
-#define INCL_DOSERRORS
-#include <os2.h>
-#pragma hdrstop
-
-/*
- * sh_FileFcn --
- *
- * A function that operates on a file.  The pathname is either
- * absolute or relative to the current directory, and contains
- * no wildcard characters such as * and ?.   Additional arguments
- * can be passed to the function via the arg pointer.
- */
-
-typedef BOOL (*sh_FileFcn)(
-        char *pathName,
-        FILEFINDBUF3 *fileData,
-        void *arg);
-
-static int shellCp (char **pArgv); 
-static int shellNsinstall (char **pArgv);
-static int shellMkdir (char **pArgv); 
-static BOOL sh_EnumerateFiles(const char *pattern, const char *where,
-        sh_FileFcn fileFcn, void *arg, int *nFiles);
-static const char *sh_GetLastErrorMessage(void);
-static BOOL sh_DoCopy(char *srcFileName, ULONG srcFileAttributes,
-        char *dstFileName, ULONG dstFileAttributes,
-        int force, int recursive);
-
-static ULONG GetFileAttributes(PSZ pszFileName);
-static APIRET SetFileAttributes(PSZ pszFileName, ULONG ulFileAttributes);
-
-/* changes all forward slashes in token to back slashes */
-void changeForwardSlashesTpBackSlashes ( char *arg )
-{
-	if ( arg == NULL )
-		return;
-
-	while ( *arg ) {
-		if ( *arg == '/' )
-			*arg = '\\';
-		arg++;			
-	}
-}
-
-int main(int argc, char *argv[ ])
-{
-	return shellNsinstall ( argv + 1 );
-}
-
-static int
-shellNsinstall (char **pArgv)
-{
-	int retVal = 0;		/* exit status */
-	int dirOnly = 0;	/* 1 if and only if -D is specified */
-	char **pSrc;
-	char **pDst;
-
-	/*
-	 * Process the command-line options.  We ignore the
-	 * options except for -D.  Some options, such as -m,
-	 * are followed by an argument.  We need to skip the
-	 * argument too.
-	 */
-	while ( *pArgv && **pArgv == '-' ) {
-		char c = (*pArgv)[1];  /* The char after '-' */
-
-		if ( c == 'D' ) {
-			dirOnly = 1;
-		} else if ( c == 'm' ) {
-			pArgv++;  /* skip the next argument */
-		}
-		pArgv++;
-	}
-
-	if ( !dirOnly ) {
-		/* There are files to install.  Get source files */
-		if ( *pArgv ) {
-			pSrc = pArgv++;
-		} else {
-			fprintf( stderr, "nsinstall: not enough arguments\n");
-			return 3;
-		}
-	}
-
-	/* Get to last token to find destination directory */
-	if ( *pArgv ) {
-		pDst = pArgv++;
-		if ( dirOnly && *pArgv ) {
-			fprintf( stderr, "nsinstall: too many arguments with -D\n");
-			return 3;
-		}
-	} else {
-		fprintf( stderr, "nsinstall: not enough arguments\n");
-		return 3;
-	}
-	while ( *pArgv ) 
-		pDst = pArgv++;
-
-  	retVal = shellMkdir ( pDst );
-	if ( retVal )
-		return retVal;
-	if ( !dirOnly )
-		retVal = shellCp ( pSrc );
-	return retVal;
-}
-
-static int
-shellMkdir (char **pArgv) 
-{
-	int retVal = 0;			/* assume valid return */
-	char *arg;
-	char *pArg;
-	char path[CCHMAXPATH];
-	char tmpPath[CCHMAXPATH];
-	char *pTmpPath = tmpPath;
-
-	/* All the options are simply ignored in this implementation */
-	while ( *pArgv && **pArgv == '-' ) {
-		if ( (*pArgv)[1] == 'm' ) {
-			pArgv++;  /* skip the next argument (mode) */
-		}
-		pArgv++;
-	}
-
-	while ( *pArgv ) {
-		arg = *pArgv;
-		changeForwardSlashesTpBackSlashes ( arg );
-		pArg = arg;
-		pTmpPath = tmpPath;
-		while ( 1 ) {
-			/* create part of path */
-			while ( *pArg ) {
-				*pTmpPath++ = *pArg++;
-				if ( *pArg == '\\' )
-					break;
-			}
-			*pTmpPath = '\0';
-
-			/* check if directory alreay exists */
-			_getcwd ( path, sizeof (path) );
-			if (( _chdir ( tmpPath ) != -1 ) || ((tmpPath[1] == ':') && (tmpPath[2] == '\0'))) {
-				_chdir ( path );
-			} else {
-				if ( _mkdir ( tmpPath ) == -1 ) {
-//				while ( waitForDebug );
-					printf ( "%s: ", tmpPath );
-					perror ( "Could not create the directory" );
-					retVal = 3;
-					break;
-				}
-			}
-			if ( *pArg == '\0' )	/* complete path? */
-				break;
-			/* loop for next directory */
-		}
-
-		pArgv++;
-	}
-	return retVal;
-}
-
-static const char *
-sh_GetLastErrorMessage()
-{
-    static char buf[128];
-
-#ifdef OLDCODE
-    FormatMessage(
-            FORMAT_MESSAGE_FROM_SYSTEM,
-            NULL,
-            GetLastError(),
-            MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT),  /* default language */
-            buf,
-            sizeof(buf),
-            NULL
-    );
-#endif
-    return buf;
-}
-
-/*
- * struct sh_FileData --
- *
- * A pointer to the sh_FileData structure is passed into sh_RecordFileData,
- * which will fill in the fields.
- */
-
-struct sh_FileData {
-    char pathName[CCHMAXPATH];
-    ULONG attrFile;
-};
-
-/*
- * sh_RecordFileData --
- *
- * Record the pathname and attributes of the file in
- * the sh_FileData structure pointed to by arg.
- *
- * Always return TRUE (successful completion).
- *
- * This function is intended to be passed into sh_EnumerateFiles
- * to see if a certain pattern expands to exactly one file/directory,
- * and if so, record its pathname and attributes.
- */
-
-static BOOL
-sh_RecordFileData(char *pathName, FILEFINDBUF3 *findData, void *arg)
-{
-    struct sh_FileData *fData = (struct sh_FileData *) arg;
-
-    strcpy(fData->pathName, pathName);
-    fData->attrFile = findData->attrFile;
-    return TRUE;
-}
-
-static BOOL
-sh_DoCopy(char *srcFileName,
-          ULONG srcFileAttributes,
-          char *dstFileName,
-          ULONG dstFileAttributes,
-          int force,
-          int recursive
-)
-{
-    if (dstFileAttributes != 0xFFFFFFFF) {
-        if ((dstFileAttributes & FILE_READONLY) && force) {
-            dstFileAttributes &= ~FILE_READONLY;
-            SetFileAttributes(dstFileName, dstFileAttributes);
-        }
-    }
-
-    if (srcFileAttributes & FILE_DIRECTORY) {
-        fprintf(stderr, "nsinstall: %s is a directory\n",
-                srcFileName);
-        return FALSE;
-    } else {
-        if (DosCopy(srcFileName, dstFileName, DCPY_EXISTING) != NO_ERROR) {
-            fprintf(stderr, "nsinstall: cannot copy %s to %s: %s\n",
-                    srcFileName, dstFileName, sh_GetLastErrorMessage());
-            return FALSE;
-        }
-    }
-    return TRUE;
-}
-
-/*
- * struct sh_CpCmdArg --
- *
- * A pointer to the sh_CpCmdArg structure is passed into sh_CpFileCmd.
- * The sh_CpCmdArg contains information about the cp command, and
- * provide a buffer for constructing the destination file name.
- */
-
-struct sh_CpCmdArg {
-    int force;                /* -f option, ok to overwrite an existing
-                               * read-only destination file */
-    int recursive;            /* -r or -R option, recursively copy
-                               * directories. Note: this field is not used
-                               * by nsinstall and should always be 0. */
-    char *dstFileName;        /* a buffer for constructing the destination
-                               * file name */
-    char *dstFileNameMarker;  /* points to where in the dstFileName buffer
-                               * we should write the file component of the
-                               * destination file */
-};
-
-/*
- * sh_CpFileCmd --
- *
- * Copy a file to the destination directory
- * 
- * This function is intended to be passed into sh_EnumerateFiles to
- * copy all the files specified by the pattern to the destination
- * directory.
- *
- * Return TRUE if the file is successfully copied, and FALSE otherwise.
- */
-
-static BOOL
-sh_CpFileCmd(char *pathName, FILEFINDBUF3 *findData, void *cpArg)
-{
-    BOOL retVal = TRUE;
-    struct sh_CpCmdArg *arg = (struct sh_CpCmdArg *) cpArg;
-
-    strcpy(arg->dstFileNameMarker, findData->achName);
-    return sh_DoCopy(pathName, findData->attrFile,
-            arg->dstFileName, GetFileAttributes(arg->dstFileName),
-            arg->force, arg->recursive);
-}
-
-static int
-shellCp (char **pArgv) 
-{
-    int retVal = 0;
-    char **pSrc;
-    char **pDst;
-    struct sh_CpCmdArg arg;
-    struct sh_FileData dstData;
-    int dstIsDir = 0;
-    int n;
-
-    arg.force = 0;
-    arg.recursive = 0;
-    arg.dstFileName = dstData.pathName;
-    arg.dstFileNameMarker = 0;
-
-    while (*pArgv && **pArgv == '-') {
-        char *p = *pArgv;
-
-        while (*(++p)) {
-            if (*p == 'f') {
-                arg.force = 1;
-            }
-        }
-        pArgv++;
-    }
-
-    /* the first source file */
-    if (*pArgv) {
-        pSrc = pArgv++;
-    } else {
-        fprintf(stderr, "nsinstall: not enough arguments\n");
-        return 3;
-    }
-
-    /* get to the last token to find destination */
-    if (*pArgv) {
-        pDst = pArgv++;
-    } else {
-        fprintf(stderr, "nsinstall: not enough arguments\n");
-        return 3;
-    }
-    while (*pArgv) {
-        pDst = pArgv++;
-    }
-
-    /*
-     * The destination pattern must unambiguously expand to exactly
-     * one file or directory.
-     */
-
-    changeForwardSlashesTpBackSlashes(*pDst);
-    sh_EnumerateFiles(*pDst, *pDst, sh_RecordFileData, &dstData, &n);
-    assert(n >= 0);
-    if (n == 1) {
-        /*
-         * Is the destination a file or directory?
-         */
-
-        if (dstData.attrFile & FILE_DIRECTORY) {
-            dstIsDir = 1;
-        }
-    } else if (n > 1) {
-        fprintf(stderr, "nsinstall: %s: ambiguous destination file "
-                "or directory\n", *pDst);
-        return 3;
-    } else {
-        /*
-         * n == 0, meaning that destination file or directory does
-         * not exist.  In this case the destination file directory
-         * name must be fully specified.
-         */
-
-        char *p;
-
-        for (p = *pDst; *p; p++) {
-            if (*p == '*' || *p == '?') {
-                fprintf(stderr, "nsinstall: %s: No such file or directory\n",
-                        *pDst);
-                return 3;
-            }
-        }
-
-        /*
-         * Do not include the trailing \, if any, unless it is a root
-         * directory (\ or X:\).
-         */
-
-        if (p > *pDst && p[-1] == '\\' && p != *pDst + 1 && p[-2] != ':') {
-            p[-1] = '\0';
-        }
-        strcpy(dstData.pathName, *pDst);
-        dstData.attrFile = 0xFFFFFFFF;
-    }
-
-    /*
-     * If there are two or more source files, the destination has
-     * to be a directory.
-     */
-
-    if (pDst - pSrc > 1 && !dstIsDir) {
-        fprintf(stderr, "nsinstall: cannot copy more than"
-                " one file to the same destination file\n");
-        return 3;
-    }
-
-    if (dstIsDir) {
-        arg.dstFileNameMarker = arg.dstFileName + strlen(arg.dstFileName);
-
-        /*
-         * Now arg.dstFileNameMarker is pointing to the null byte at the
-         * end of string.  We want to make sure that there is a \ at the
-         * end of string, and arg.dstFileNameMarker should point right
-         * after that \. 
-         */
-
-        if (arg.dstFileNameMarker[-1] != '\\') {
-            *(arg.dstFileNameMarker++) = '\\';
-        }
-    }
-	
-    if (!dstIsDir) {
-        struct sh_FileData srcData;
-
-        assert(pDst - pSrc == 1);
-        changeForwardSlashesTpBackSlashes(*pSrc);
-        sh_EnumerateFiles(*pSrc, *pSrc, sh_RecordFileData, &srcData, &n);
-        if (n == 0) {
-            fprintf(stderr, "nsinstall: %s: No such file or directory\n",
-                    *pSrc);
-            retVal = 3;
-        } else if (n > 1) {
-            fprintf(stderr, "nsinstall: cannot copy more than one file or "
-                    "directory to the same destination\n");
-            retVal = 3;
-        } else {
-            assert(n == 1);
-            if (sh_DoCopy(srcData.pathName, srcData.attrFile,
-                    dstData.pathName, dstData.attrFile,
-                    arg.force, arg.recursive) == FALSE) {
-                retVal = 3;
-            }
-        }
-        return retVal;
-    }
-
-    for ( ; *pSrc != *pDst; pSrc++) {
-        BOOL rv;
-
-        changeForwardSlashesTpBackSlashes(*pSrc);
-        rv = sh_EnumerateFiles(*pSrc, *pSrc, sh_CpFileCmd, &arg, &n);
-        if (rv == FALSE) {
-            retVal = 3;
-        } else {
-            if (n == 0) {
-                fprintf(stderr, "nsinstall: %s: No such file or directory\n",
-                        *pSrc);
-                retVal = 3;
-            }
-        }
-    }
-
-    return retVal;
-}
-
-/*
- * sh_EnumerateFiles --
- *
- * Enumerate all the files in the specified pattern, which is a pathname
- * containing possibly wildcard characters such as * and ?.  fileFcn
- * is called on each file, passing the expanded file name, a pointer
- * to the file's FILEFINDBUF3, and the arg pointer.
- * 
- * It is assumed that there are no wildcard characters before the
- * character pointed to by 'where'.
- *
- * On return, *nFiles stores the number of files enumerated.  *nFiles is
- * set to this number whether sh_EnumerateFiles or 'fileFcn' succeeds
- * or not.
- *
- * Return TRUE if the files are successfully enumerated and all
- * 'fileFcn' invocations succeeded.  Return FALSE if something went
- * wrong.
- */
-
-static BOOL sh_EnumerateFiles(
-        const char *pattern,
-        const char *where,
-        sh_FileFcn fileFcn,
-        void *arg,
-        int *nFiles
-        )
-{
-    FILEFINDBUF3 fileData = {0};
-    HDIR hSearch;
-    APIRET ulrc;
-    ULONG ulFindCount = 1;
-    const char *src;
-    char *dst;
-    char fileName[CCHMAXPATH];
-    char *fileNameMarker = fileName;
-    char *oldFileNameMarker;
-    BOOL hasWildcard = FALSE;
-    BOOL retVal = TRUE;
-    BOOL patternEndsInDotStar = FALSE;
-    BOOL patternEndsInDot = FALSE;  /* a special case of
-                                     * patternEndsInDotStar */
-    int numDotsInPattern;
-    int len;
-    
-    /*
-     * Windows expands patterns ending in ".", ".*", ".**", etc.
-     * differently from the glob expansion on Unix.  For example,
-     * both "foo." and "foo.*" match "foo", and "*.*" matches
-     * everything, including filenames with no dots.  So we need
-     * to throw away extra files returned by the FindNextFile()
-     * function.  We require that a matched filename have at least
-     * the number of dots in the pattern.
-     */
-    len = strlen(pattern);
-    if (len >= 2) {
-        /* Start from the end of pattern and go backward */
-        const char *p = &pattern[len - 1];
-
-        /* We can have zero or more *'s */
-        while (p >= pattern && *p == '*') {
-            p--;
-        }
-        if (p >= pattern && *p == '.') {
-            patternEndsInDotStar = TRUE;
-            if (p == &pattern[len - 1]) {
-                patternEndsInDot = TRUE;
-            }
-            p--;
-            numDotsInPattern = 1;
-            while (p >= pattern && *p != '\\') {
-                if (*p == '.') {
-                    numDotsInPattern++;
-                }
-                p--;
-            }
-        }
-    }
-
-    *nFiles = 0;
-
-    /*
-     * Copy pattern to fileName, but only up to and not including
-     * the first \ after the first wildcard letter.
-     *
-     * Make fileNameMarker point to one of the following:
-     * - the start of fileName, if fileName does not contain any \.
-     * - right after the \ before the first wildcard letter, if there is
-     *   a wildcard character.
-     * - right after the last \, if there is no wildcard character.
-     */
-
-    dst = fileName;
-    src = pattern;
-    while (src < where) {
-        if (*src == '\\') {
-            oldFileNameMarker = fileNameMarker;
-            fileNameMarker = dst + 1;
-        }
-        *(dst++) = *(src++);
-    }
-
-    while (*src && *src != '*' && *src != '?') {
-        if (*src == '\\') {
-            oldFileNameMarker = fileNameMarker;
-            fileNameMarker = dst + 1;
-        }
-        *(dst++) = *(src++);
-    }
-
-    if (*src) {
-        /*
-         * Must have seen the first wildcard letter
-         */
-
-        hasWildcard = TRUE;
-        while (*src && *src != '\\') {
-            *(dst++) = *(src++);
-        }
-    }
-    
-    /* Now src points to either null or \ */
-
-    assert(*src == '\0' || *src == '\\');
-    assert(hasWildcard || *src == '\0');
-    *dst = '\0';
-
-    /*
-     * If the pattern does not contain any wildcard characters, then
-     * we don't need to go the FindFirstFile route.
-     */
-
-    if (!hasWildcard) {
-        /*
-         * See if it is the root directory, \, or X:\.
-         */
-
-        assert(!strcmp(fileName, pattern));
-        assert(strlen(fileName) >= 1);
-        if (dst[-1] == '\\' && (dst == fileName + 1 || dst[-2] == ':')) {
-            fileData.achName[0] = '\0';
-        } else {
-            /*
-             * Do not include the trailing \, if any
-             */
-
-            if (dst[-1] == '\\') {
-                assert(*fileNameMarker == '\0');
-                dst[-1] = '\0';
-                fileNameMarker = oldFileNameMarker;
-            } 
-            strcpy(fileData.achName, fileNameMarker);
-        }
-        fileData.attrFile = GetFileAttributes(fileName);
-        if (fileData.attrFile == 0xFFFFFFFF) {
-            return TRUE;
-        }
-        *nFiles = 1;
-        return (*fileFcn)(fileName, &fileData, arg);
-    }
-
-    hSearch = HDIR_CREATE;
-    ulrc = DosFindFirst(fileName, &hSearch, FILE_NORMAL, &fileData, sizeof(fileData),
-                        &ulFindCount, FIL_STANDARD);
-    if (ulrc == ERROR_INVALID_HANDLE) {
-        return retVal;
-    }
-
-    do {
-        if (!strcmp(fileData.achName, ".")
-                || !strcmp(fileData.achName, "..")) {
-            /* 
-             * Skip over . and ..
-             */
-
-            continue;
-        }
-
-        if (patternEndsInDotStar) {
-            int nDots = 0;
-            char *p = fileData.achName;
-            while (*p) {
-                if (*p == '.') {
-                    nDots++;
-                }
-                p++;
-            }
-            /* Now p points to the null byte at the end of file name */
-            if (patternEndsInDot && (p == fileData.achName
-                    || p[-1] != '.')) {
-                /*
-                 * File name does not end in dot.  Skip this file.
-                 * Note: windows file name probably cannot end in dot,
-                 * but we do this check anyway.
-                 */
-                continue;
-            }
-            if (nDots < numDotsInPattern) {
-                /*
-                 * Not enough dots in file name.  Must be an extra
-                 * file in matching .* pattern.  Skip this file.
-                 */
-                continue;
-            }
-        }
-
-        strcpy(fileNameMarker, fileData.achName);
-        if (*src && *(src + 1)) {
-            /*
-             * More to go.  Recurse.
-             */
-
-            int n;
-
-            assert(*src == '\\');
-            where = fileName + strlen(fileName);
-            strcat(fileName, src);
-            sh_EnumerateFiles(fileName, where, fileFcn, arg, &n);
-            *nFiles += n;
-        } else {
-            assert(strchr(fileName, '*') == NULL);
-            assert(strchr(fileName, '?') == NULL);
-            (*nFiles)++;
-            if ((*fileFcn)(fileName, &fileData, arg) == FALSE) {
-                retVal = FALSE;
-            }
-        }
-    } while (DosFindNext(hSearch, &fileData, sizeof(fileData), &ulFindCount) == NO_ERROR);
-
-    DosFindClose(hSearch);
-    return retVal;
-}
-
-static ULONG GetFileAttributes(PSZ pszFileName)
-{
-  FILESTATUS3  fsts3;
-  APIRET       rc;
- 
-  rc = DosQueryPathInfo(pszFileName,
-                        FIL_STANDARD,
-                        &fsts3,
-                        sizeof(FILESTATUS3));
-  if (rc != NO_ERROR) {
-     return -1;
-  } /* endif */
-  return fsts3.attrFile;
-}
-
-static APIRET SetFileAttributes(PSZ pszFileName, ULONG ulFileAttributes)
-{
-}
-

buildtools/windows/batch/MOZENV.BAT

@@ -1,74 +0,0 @@
-@echo off
-
-rem * To set up your local build read and customize this batch file.
-rem * You shouldn't have to touch anything but "set" statements
-rem * Batch file contributed by Lucas Gonze (lucas@gonze.com) and
-rem * Rick Ekle (rele@iconect.net)
-
-rem * This stuff forces us to not reset the environment variables more
-rem * than once.  It would cause some vars to get longer than 127 chars
-rem * (the longest possible batch line) to run this stuff more than once.
-if "%1%" == "-force" goto skiptest
-if "%MOZBUILD%" == "ALREADYDONE" goto alldone
-:skiptest
-echo setting up environment...
-set MOZBUILD=ALREADYDONE
-
-rem * if this isn't set properly your build will get
-rem * "file './config/WIN' not found"
-set MOZ_BITS=32
-
-set MOZ_GOLD=1
-set MOZ_MEDIUM=1
-set NO_SECURITY=1
-set NSPR20=1
-
-rem * don't set this if you want to make an optimized release build
-set MOZ_DEBUG=1
-
-rem * set if running NT 3.51, don't set otherwise
-rem * set MOZ_NT=351
-
-rem * location of resulting executable and totally optional.
-rem * If you don't set this, mozilla.exe will be generated into
-rem * mozilla\cmd\winfe\mkfiles32\x86dbg (or x86rel for optimized builds)
-rem * set MOZ_OUT=d:\bin
-
-rem * top of your tree, drive letter and path, i.e. set d:\mozilla_src.
-rem * The topmost directory under this should be mozilla
-rem * so if you extracted zip file to z:\foo, this should be z:\foo
-set MOZ_SRC=d:\moz\
-
-rem * location of the bin directory containing your GNU tools. The build
-
-rem * looks for MOZ_TOOLS\bin\gmake.exe, so after you download and unpack
-rem * wintools.zip, make some directory called "bin", put your new
-rem * uname.exe, shmsdos.exe, and gmake.exe in it, and set MOZ_TOOLS to
-rem * the place where you put it.
-set MOZ_TOOLS=d:
-
-rem * where to find cp.exe and rm.exe, aka gnu tools for windows
-set gnuTools=D:\CDK\H-I386~1\bin
-
-rem * the important thing is that your new moz tools should be first
-SET PATH=%MOZ_TOOLS%\bin;%gnuTools%;%PATH%
-
-rem * if you are running VC++ 5.0 or higher, this will prevent the build
-
-rem * from trying to pick up uuid2.lib, which only exists in previous
-rem * versions of vc++.
-set _MSC_VER=1100
-
-rem * vcvars32.bat is created by visual c++ install to
-rem * enable command line builds
-echo setting up visual c++ environment...
-call d:\bin\vcvars32.bat
-
-:alldone
-@echo environment set up, building mozilla...
-
-rem * uncomment these to make the script build as well
-
-rem cd %MOZ_SRC%
-rem cd mozilla
-rem nmake -f client.mak

buildtools/windows/bin/README

@@ -1,26 +0,0 @@
-Building NSPR on Windows NT Using Netscape's gmake and Other Tools
-
-This directory contains the following tools:
-- gmake.exe: GNU make 3.74, modified to use shmsdos.exe as the shell
-- shmsdos.exe: a lightweight shell developed by Netscape programmers.
-      It has most of the file manipulation operations (such as cp,
-      rm, mkdir as well as Netscape's own nsinstall) as built-in
-      commands, so even if you have these
-      file utilities installed on your NT machine, they won't be invoked
-      by gmake and shmsdos.  Also, since shmsdos is not a full-blown
-      shell and its built-in file commands are not fully compatible
-      with the true Unix file utilities, our makefiles have had to
-      avoid some features of sh and work around the incompatibilities
-      on Windows NT.
-- uname.exe: this uname.exe returns the OS as "WINNT", which is what
-      our makefiles assume.  Do not use a uname.exe that returns other
-      strings, such as "Windows_NT".
-
-Binaries for the x86 processors can be found in the 'x86' subdirectory.
-Binaries for the alpha processors can be found in the 'alpha'
-subdirectory.
-
-INSTALLATION:
-
-Install gmake.exe, shmsdos.exe, and uname.exe in any directory.
-Add that directory to your Path environment variable.

buildtools/windows/include/acconfig.h

@@ -1,107 +0,0 @@
-/* GLIB - Library of useful routines for C programming
- * Copyright (C) 1995-1997  Peter Mattis, Spencer Kimball and Josh MacDonald
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Library General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Library General Public License for more details.
- *
- * You should have received a copy of the GNU Library General Public
- * License along with this library; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 02111-1307, USA.
- */
-/* acconfig.h
-   This file is in the public domain.
-
-   Descriptive text for the C preprocessor macros that
-   the distributed Autoconf macros can define.
-   No software package will use all of them; autoheader copies the ones
-   your configure.in uses into your configuration header file templates.
-
-   The entries are in sort -df order: alphabetical, case insensitive,
-   ignoring punctuation (such as underscores).  Although this order
-   can split up related entries, it makes it easier to check whether
-   a given entry is in the file.
-
-   Leave the following blank line there!!  Autoheader needs it.  */
-
-
-/* Other stuff */
-
-#undef ENABLE_MEM_CHECK
-#undef ENABLE_MEM_PROFILE
-
-#undef G_COMPILED_WITH_DEBUGGING
-#undef G_THREADS_ENABLED
-
-#undef GLIB_SIZEOF_GMUTEX
-#undef GLIB_BYTE_CONTENTS_GMUTEX
-
-#undef HAVE_BROKEN_WCTYPE
-#undef HAVE_DOPRNT
-#undef HAVE_FLOAT_H
-#undef HAVE_GETPWUID_R
-#undef HAVE_GETPWUID_R_POSIX
-#undef HAVE_LIMITS_H
-#undef HAVE_LONG_DOUBLE
-#undef HAVE_POLL
-#undef HAVE_PTHREAD_GETSPECIFIC_POSIX
-#undef HAVE_PWD_H
-#undef HAVE_SYS_PARAM_H
-#undef HAVE_SYS_POLL_H
-#undef HAVE_SYS_SELECT_H
-#undef HAVE_SYS_TIME_H
-#undef HAVE_SYS_TIMES_H
-#undef HAVE_STRERROR
-#undef HAVE_STRSIGNAL
-#undef HAVE_UNISTD_H
-#undef HAVE_VALUES_H
-#undef HAVE_WCHAR_H
-#undef HAVE_WCTYPE_H
-
-#undef NO_FD_SET
-#undef NO_SYS_ERRLIST
-#undef NO_SYS_SIGLIST
-#undef NO_SYS_SIGLIST_DECL
-
-#undef WITH_SYMBOL_UNDERSCORE
-
-#undef SIZEOF_CHAR
-#undef SIZEOF_SHORT
-#undef SIZEOF_LONG
-#undef SIZEOF_INT
-#undef SIZEOF_VOID_P
-
-#undef G_VA_COPY
-#undef G_VA_COPY_AS_ARRAY
-#undef G_HAVE___INLINE
-#undef G_HAVE___INLINE__
-#undef G_HAVE_INLINE
-
-#undef GLIB_MAJOR_VERSION
-#undef GLIB_MINOR_VERSION
-#undef GLIB_MICRO_VERSION
-#undef GLIB_INTERFACE_AGE
-#undef GLIB_BINARY_AGE
-
-#undef WIN32
-#undef NATIVE_WIN32
-
-#undef G_THREAD_SOURCE
-
-/* #undef PACKAGE */
-/* #undef VERSION */
-
-
-
-
-/* Leave that blank line there!!  Autoheader needs it.
-   If you're adding to this file, keep in mind:
-   The entries are in sort -df order: alphabetical, case insensitive,
-   ignoring punctuation (such as underscores).  */

buildtools/windows/include/config.h

@@ -1,138 +0,0 @@
-/* config.h.win32. Handcrafted for Microsoft C */
-
-/* Define to empty if the keyword does not work.  */
-/* #undef const */
-
-/* Define if you don't have vprintf but do have _doprnt.  */
-/* #undef HAVE_DOPRNT */
-
-/* Define if you have <unistd.h>.  */
-/* #undef HAVE_UNISTD_H */
-
-/* Define if you have the vprintf function.  */
-#define HAVE_VPRINTF 1
-
-/* Define if you have the ANSI C header files.  */
-#define STDC_HEADERS 1
-
-/* Define if your processor stores words with the most significant
-   byte first (like Motorola and SPARC, unlike Intel and VAX).  */
-/* #undef WORDS_BIGENDIAN */
-
-/* #undef ENABLE_MEM_CHECK */
-/* #undef ENABLE_MEM_PROFILE */
-
-#define G_COMPILED_WITH_DEBUGGING "minimum"
-
-/* #undef HAVE_BROKEN_WCTYPE */
-/* #undef HAVE_DOPRNT */
-#define HAVE_FLOAT_H 1
-#define HAVE_LIMITS_H 1
-/* #undef HAVE_LOCALTIME_R */
-/* #undef HAVE_LONG_DOUBLE */
-/* #undef HAVE_POLL */
-/* #undef HAVE_PWD_H */
-/* #undef HAVE_SYS_PARAM_H */
-/* #undef HAVE_SYS_POLL_H */
-/* #undef HAVE_SYS_SELECT_H */
-/* #undef HAVE_SYS_TIME_H */
-/* #undef HAVE_SYS_TIMES_H */
-#define HAVE_STRERROR 1
-/* #undef HAVE_STRSIGNAL */
-/* #undef HAVE_UNISTD_H */
-/* #undef HAVE_VSNPRINTF */
-/* #undef HAVE_VALUES_H */
-#define HAVE_VPRINTF 1
-#define HAVE_WCHAR_H 1
-#define HAVE_WCTYPE_H 1
-
-/* #undef NO_FD_SET */
-/* #undef NO_SYS_ERRLIST */
-#define NO_SYS_SIGLIST 1
-
-/* #undef G_VA_COPY */
-/* #undef G_VA_COPY_AS_ARRAY */
-#define G_HAVE___INLINE 1
-
-#define GLIB_MAJOR_VERSION 1
-#define GLIB_MINOR_VERSION 2
-#define GLIB_MICRO_VERSION 0
-#define GLIB_INTERFACE_AGE 0
-#define GLIB_BINARY_AGE 0
-
-#define G_THREAD_SOURCE "gthread-posix.c"
-#define G_THREADS_IMPL_POSIX
-#define HAVE_PTHREAD_GETSPECIFIC_POSIX 1
-
-/* The number of bytes in a char.  */
-#define SIZEOF_CHAR 1
-
-/* The number of bytes in a int.  */
-#define SIZEOF_INT 4
-
-/* The number of bytes in a long.  */
-#define SIZEOF_LONG 4
-
-/* The number of bytes in a long long.  */
-#define SIZEOF_LONG_LONG 8
-
-/* The number of bytes in a short.  */
-#define SIZEOF_SHORT 2
-
-/* The number of bytes in a void *.  */
-#define SIZEOF_VOID_P 4
-
-/* Define if you have the atexit function.  */
-#define HAVE_ATEXIT 1
-
-/* Define if you have the lstat function.  */
-/* #undef HAVE_LSTAT */
-
-/* Define if you have the memmove function.  */
-#define HAVE_MEMMOVE 1
-
-/* Define if you have the on_exit function.  */
-/* #undef HAVE_ON_EXIT */
-
-/* Define if you have the strcasecmp function.  */
-/* #undef HAVE_STRCASECMP ^*/
-
-/* Define if you have the strerror function.  */
-#define HAVE_STRERROR 1
-
-/* Define if you have the strsignal function.  */
-/* #undef HAVE_STRSIGNAL */
-
-/* Define if you have the vsnprintf function.  */
-/* #undef HAVE_VSNPRINTF */
-
-/* Define if you have the <float.h> header file.  */
-#define HAVE_FLOAT_H 1
-
-/* Define if you have the <limits.h> header file.  */
-#define HAVE_LIMITS_H 1
-
-/* Define if you have the <pwd.h> header file.  */
-/* #undef HAVE_PWD_H */
-
-/* Define if you have the <sys/param.h> header file.  */
-/* #undef HAVE_SYS_PARAM_H */
-
-/* Define if you have the <sys/select.h> header file.  */
-/* #undef HAVE_SYS_SELECT_H */
-
-/* Define if you have the <sys/time.h> header file.  */
-/* #undef HAVE_SYS_TIME_H */
-
-/* Define if you have the <sys/times.h> header file.  */
-/* #undef HAVE_SYS_TIMES_H */
-
-/* Define if you have the <unistd.h> header file.  */
-/* #undef HAVE_UNISTD_H */
-
-/* Define if you have the <values.h> header file.  */
-/* #undef HAVE_VALUES_H */
-
-/* Define if you have the w library (-lw).  */
-/* #undef HAVE_LIBW */
-

buildtools/windows/include/glibconfig.h

@@ -1,173 +0,0 @@
-/* glibconfig.h.win32 */
-/* Handcrafted for Microsoft C. */
-
-#ifndef GLIBCONFIG_H
-#define GLIBCONFIG_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-#ifdef _MSC_VER
-/* Make MSVC more pedantic, this is a recommended pragma list
- * from _Win32_Programming_ by Rector and Newcomer.
- */
-#pragma warning(error:4002)
-#pragma warning(error:4003)
-#pragma warning(1:4010)
-#pragma warning(error:4013)
-#pragma warning(1:4016)
-#pragma warning(error:4020)
-#pragma warning(error:4021)
-#pragma warning(error:4027)
-#pragma warning(error:4029)
-#pragma warning(error:4033)
-#pragma warning(error:4035)
-#pragma warning(error:4045)
-#pragma warning(error:4047)
-#pragma warning(error:4049)
-#pragma warning(error:4053)
-#pragma warning(error:4071)
-#pragma warning(disable:4101)
-#pragma warning(error:4150)
-
-#pragma warning(disable:4244)	/* No possible loss of data warnings */
-#pragma warning(disable:4305)   /* No truncation from int to char warnings */
-#endif /* _MSC_VER */
-
-#include <limits.h>
-#include <float.h>
-
-#define G_MINFLOAT	FLT_MIN
-#define G_MAXFLOAT	FLT_MAX
-#define G_MINDOUBLE	DBL_MIN
-#define G_MAXDOUBLE	DBL_MAX
-#define G_MINSHORT	SHRT_MIN
-#define G_MAXSHORT	SHRT_MAX
-#define G_MININT	INT_MIN
-#define G_MAXINT	INT_MAX
-#define G_MINLONG	LONG_MIN
-#define G_MAXLONG	LONG_MAX
-
-typedef signed char gint8;
-typedef unsigned char guint8;
-typedef signed short gint16;
-typedef unsigned short guint16;
-typedef signed int gint32;
-typedef unsigned int guint32;
-
-#define G_HAVE_GINT64 1
-
-typedef __int64 gint64;
-typedef unsigned __int64 guint64;
-
-#define G_GINT64_CONSTANT(val)	(val##i64)
-
-#define GPOINTER_TO_INT(p)	((gint)(p))
-#define GPOINTER_TO_UINT(p)	((guint)(p))
-
-#define GINT_TO_POINTER(i)	((gpointer)(i))
-#define GUINT_TO_POINTER(u)	((gpointer)(u))
-
-#define g_ATEXIT(proc)	(atexit (proc))
-
-#define g_memmove(d,s,n) G_STMT_START { memmove ((d), (s), (n)); } G_STMT_END
-
-#define G_HAVE_ALLOCA 1
-#define alloca _alloca
-
-#define GLIB_MAJOR_VERSION 1
-#define GLIB_MINOR_VERSION 2
-#define GLIB_MICRO_VERSION 0
-
-#ifdef	__cplusplus
-#define	G_HAVE_INLINE	1
-#else	/* !__cplusplus */
-#define G_HAVE___INLINE 1
-#endif
-
-#define G_THREADS_ENABLED
-/*
- * The following program can be used to determine the magic values below:
- * #include <stdio.h>
- * #include <pthread.h>
- * main(int argc, char **argv)
- * {
- *   int i;
- *   pthread_mutex_t m = PTHREAD_MUTEX_INITIALIZER;
- *   printf ("sizeof (pthread_mutex_t) = %d\n", sizeof (pthread_mutex_t));
- *   printf ("PTHREAD_MUTEX_INITIALIZER = ");
- *   for (i = 0; i < sizeof (pthread_mutex_t); i++)
- *     printf ("%u, ", (unsigned) ((char *) &m)[i]);
- *   printf ("\n");
- *   exit(0);
- * }
- */
-
-typedef struct _GStaticMutex GStaticMutex;
-struct _GStaticMutex
-{
-  struct _GMutex *runtime_mutex;
-  union {
-    /* The size of the pad array should be sizeof (pthread_mutext_t) */
-    /* This value corresponds to the 1999-01-24 version of pthreads-win32 */
-    char   pad[36];
-    double dummy_double;
-    void  *dummy_pointer;
-    long   dummy_long;
-  } aligned_pad_u;
-};
-/* This should be NULL followed by the bytes in PTHREAD_MUTEX_INITIALIZER */
-#define	G_STATIC_MUTEX_INIT	{ NULL, { { 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } } }
-#define	g_static_mutex_get_mutex(mutex) \
-  (g_thread_use_default_impl ? ((GMutex*) &((mutex)->aligned_pad_u)) : \
-   g_static_mutex_get_mutex_impl (&((mutex)->runtime_mutex)))
-
-#define G_BYTE_ORDER G_LITTLE_ENDIAN
-
-#define GINT16_TO_LE(val)	((gint16) (val))
-#define GUINT16_TO_LE(val)	((guint16) (val))
-#define GINT16_TO_BE(val)	((gint16) GUINT16_SWAP_LE_BE (val))
-#define GUINT16_TO_BE(val)	(GUINT16_SWAP_LE_BE (val))
-
-#define GINT32_TO_LE(val)	((gint32) (val))
-#define GUINT32_TO_LE(val)	((guint32) (val))
-#define GINT32_TO_BE(val)	((gint32) GUINT32_SWAP_LE_BE (val))
-#define GUINT32_TO_BE(val)	(GUINT32_SWAP_LE_BE (val))
-
-#define GINT64_TO_LE(val)	((gint64) (val))
-#define GUINT64_TO_LE(val)	((guint64) (val))
-#define GINT64_TO_BE(val)	((gint64) GUINT64_SWAP_LE_BE (val))
-#define GUINT64_TO_BE(val)	(GUINT64_SWAP_LE_BE (val))
-
-#define GLONG_TO_LE(val)	((glong) GINT32_TO_LE (val))
-#define GULONG_TO_LE(val)	((gulong) GUINT32_TO_LE (val))
-#define GLONG_TO_BE(val)	((glong) GINT32_TO_BE (val))
-#define GULONG_TO_BE(val)	((gulong) GUINT32_TO_BE (val))
-
-#define GINT_TO_LE(val)		((gint) GINT32_TO_LE (val))
-#define GUINT_TO_LE(val)	((guint) GUINT32_TO_LE (val))
-#define GINT_TO_BE(val)		((gint) GINT32_TO_BE (val))
-#define GUINT_TO_BE(val)	((guint) GUINT32_TO_BE (val))
-
-#define GLIB_SYSDEF_POLLIN	= 1
-#define GLIB_SYSDEF_POLLOUT	= 4
-#define GLIB_SYSDEF_POLLPRI	= 2
-#define GLIB_SYSDEF_POLLERR	= 8
-#define GLIB_SYSDEF_POLLHUP	= 16
-#define GLIB_SYSDEF_POLLNVAL	= 32
-
-#define G_HAVE_WCHAR_H 1
-#define G_HAVE_WCTYPE_H 1
-
-/* Define if this is Win32, possibly using the Cygwin emulation layer. */
-#define WIN32 1
-
-/* Define if this is Win32 without Cygwin.  */
-#define NATIVE_WIN32 1
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* GLIBCONFIG_H */

buildtools/windows/include/libIDL/IDL.h

@@ -1,827 +0,0 @@
-/**************************************************************************
-
-    IDL.h (IDL parse tree and namespace components)
-
-    Include wide character support before this, if necessary.
-
-    Copyright (C) 1998, 1999 Andrew T. Veliath
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Library General Public
-    License as published by the Free Software Foundation; either
-    version 2 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Library General Public License for more details.
-
-    You should have received a copy of the GNU Library General Public
-    License along with this library; if not, write to the Free
-    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-    $Id: IDL.h,v 1.1 1999-04-08 20:04:26 mccabe%netscape.com Exp $
-
-***************************************************************************/
-#ifndef __IDL_H
-#define __IDL_H
-
-#include <glib.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* version */
-#define LIBIDL_VERSION(a,b,c)		(((a) << 16) + ((b) << 8) + (c))
-#define LIBIDL_MAJOR_VERSION		0
-#define LIBIDL_MINOR_VERSION		6
-#define LIBIDL_MICRO_VERSION		3
-#define LIBIDL_VERSION_CODE		LIBIDL_VERSION(0,6,3)
-
-/* miscellaneous constants */
-#define IDL_SUCCESS			0
-#define IDL_ERROR			1
-#define IDL_WARNING1			2
-#define IDL_WARNING2			3
-#define IDL_WARNING3			4
-#define IDL_WARNINGMAX			IDL_WARNING3
-
-/* general parse flags */
-#define IDLF_VERBOSE			(1UL << 0)
-#define IDLF_NO_EVAL_CONST		(1UL << 1)
-#define IDLF_COMBINE_REOPENED_MODULES	(1UL << 2)
-#define IDLF_PREFIX_FILENAME		(1UL << 3)
-#define IDLF_IGNORE_FORWARDS		(1UL << 4)
-#define IDLF_PEDANTIC			(1UL << 5)
-
-/* syntax extension parse flags */
-#define IDLF_TYPECODES			(1UL << 16)
-#define IDLF_XPIDL			(1UL << 17)
-
-/* declaration specification flags */
-#define IDLF_DECLSPEC_EXIST		(1UL << 0)
-#define IDLF_DECLSPEC_INHIBIT		(1UL << 1)
-
-/* output flags */
-#define IDLF_OUTPUT_NO_NEWLINES		(1UL << 0)
-#define IDLF_OUTPUT_NO_QUALIFY_IDENTS	(1UL << 1)
-#define IDLF_OUTPUT_PROPERTIES		(1UL << 2)
-#define IDLF_OUTPUT_CODEFRAGS		(1UL << 3)
-
-#ifdef _WIN32
-#  define IDL_EXPORT			__declspec (dllexport)
-#  define IDL_IMPORT			__declspec (dllimport)
-#else
-#  define IDL_EXPORT			/* empty */
-#  define IDL_IMPORT			extern
-#endif
-
-/* type casting checks */
-#define IDL_check_cast_enable(boolean)	do {	\
-	IDL_IMPORT int __IDL_check_type_casts;	\
-	__IDL_check_type_casts = (boolean);	\
-} while (0)
-#define IDL_CHECK_CAST(tree, thetype, name)			\
-	(IDL_check_type_cast(tree, thetype,			\
-			    __FILE__, __LINE__,			\
-			    G_GNUC_PRETTY_FUNCTION)->u.name)
-
-#ifdef G_HAVE_GINT64
-#  if G_MAXLONG > 0xffffffffUL
-#    define IDL_LL			"l"
-#  else
-#    define IDL_LL			"ll"
-#  endif
-typedef gint64				IDL_longlong_t;
-typedef guint64				IDL_ulonglong_t;
-#else
-#  define IDL_LL			"l"
-typedef long				IDL_longlong_t;
-typedef unsigned long			IDL_ulonglong_t;
-#  warning 64-bit integer type not available, using 32-bit instead
-#endif /* G_HAVE_GINT64 */
-	
-typedef unsigned int			IDL_declspec_t;
-typedef struct _IDL_tree_node 		IDL_tree_node;
-typedef struct _IDL_tree_node *		IDL_tree;
-
-struct _IDL_LIST {
-	IDL_tree data;
-	IDL_tree prev;
-	IDL_tree next;
-	IDL_tree _tail;			/* Internal use, may not be valid */
-};
-  
-#define IDL_LIST(a)			IDL_CHECK_CAST(a, IDLN_LIST, idl_list)
-extern IDL_tree		IDL_list_new			(IDL_tree data);
-extern IDL_tree		IDL_list_concat			(IDL_tree orig,
-							 IDL_tree append);
-extern IDL_tree		IDL_list_remove			(IDL_tree list,
-							 IDL_tree p);
-extern int		IDL_list_length			(IDL_tree list);
-extern IDL_tree		IDL_list_nth			(IDL_tree list,
-							 int n);
-
-struct _IDL_GENTREE {
-	IDL_tree data;
-	GHashTable *siblings;
-	GHashTable *children;
-	GHashFunc hash_func;
-	GCompareFunc key_compare_func;
-	IDL_tree _import;		/* Internal use, do not recurse */
-	char *_cur_prefix;		/* Internal use */
-};
-#define IDL_GENTREE(a)			IDL_CHECK_CAST(a, IDLN_GENTREE, idl_gentree)
-extern IDL_tree		IDL_gentree_new			(GHashFunc hash_func,
-							 GCompareFunc key_compare_func,
-							 IDL_tree data);
-extern IDL_tree		IDL_gentree_new_sibling		(IDL_tree from,
-							 IDL_tree data);
-extern IDL_tree		IDL_gentree_chain_sibling	(IDL_tree from,
-							 IDL_tree data);
-extern IDL_tree		IDL_gentree_chain_child		(IDL_tree from,
-							 IDL_tree data);
-
-struct _IDL_INTEGER {
-	IDL_longlong_t value;
-};
-#define IDL_INTEGER(a)			IDL_CHECK_CAST(a, IDLN_INTEGER, idl_integer)
-extern IDL_tree		IDL_integer_new			(IDL_longlong_t value);
-
-struct _IDL_STRING {
-	char *value;
-};
-#define IDL_STRING(a)			IDL_CHECK_CAST(a, IDLN_STRING, idl_string)
-extern IDL_tree		IDL_string_new			(char *value);
-
-struct _IDL_WIDE_STRING {
-	wchar_t *value;
-};
-#define IDL_WIDE_STRING(a)		IDL_CHECK_CAST(a, IDLN_WIDE_STRING, idl_wide_string)
-extern IDL_tree		IDL_wide_string_new		(wchar_t *value);
-
-struct _IDL_CHAR {
-	char *value;
-};
-#define IDL_CHAR(a)			IDL_CHECK_CAST(a, IDLN_CHAR, idl_char)
-extern IDL_tree		IDL_char_new			(char *value);
-
-struct _IDL_WIDE_CHAR {
-	wchar_t *value;
-};
-#define IDL_WIDE_CHAR(a)		IDL_CHECK_CAST(a, IDLN_WIDE_CHAR, idl_wide_char)
-extern IDL_tree		IDL_wide_char_new		(wchar_t *value);
-
-struct _IDL_FIXED {
-	char *value;
-};
-#define IDL_FIXED(a)			IDL_CHECK_CAST(a, IDLN_FIXED, idl_fixed)
-extern IDL_tree		IDL_fixed_new			(char *value);
-
-struct _IDL_FLOAT {
-	double value;
-};
-#define IDL_FLOAT(a)			IDL_CHECK_CAST(a, IDLN_FLOAT, idl_float)
-extern IDL_tree		IDL_float_new			(double value);
-
-struct _IDL_BOOLEAN {
-	unsigned value;
-};
-#define IDL_BOOLEAN(a)			IDL_CHECK_CAST(a, IDLN_BOOLEAN, idl_boolean)
-extern IDL_tree		IDL_boolean_new			(unsigned value);
-
-struct _IDL_IDENT {
-	char *str;
-	char *repo_id;
-	GSList *comments;
-	IDL_tree _ns_ref;		/* Internal use, do not recurse */
-	unsigned _flags;		/* Internal use */
-#define IDLF_IDENT_CASE_MISMATCH_HIT	(1UL << 0)
-};
-#define IDL_IDENT(a)			IDL_CHECK_CAST(a, IDLN_IDENT, idl_ident)
-#define IDL_IDENT_TO_NS(a)		IDL_CHECK_CAST(a, IDLN_IDENT, idl_ident._ns_ref)
-#define IDL_IDENT_REPO_ID(a)		IDL_CHECK_CAST(a, IDLN_IDENT, idl_ident.repo_id)
-extern IDL_tree		IDL_ident_new			(char *str);
-extern void		IDL_queue_new_ident_comment	(const char *str);
-	
-enum IDL_float_type {
-	IDL_FLOAT_TYPE_FLOAT,
-	IDL_FLOAT_TYPE_DOUBLE,
-	IDL_FLOAT_TYPE_LONGDOUBLE
-};
-	
-struct _IDL_TYPE_FLOAT {
-	enum IDL_float_type f_type;
-};
-#define IDL_TYPE_FLOAT(a)		IDL_CHECK_CAST(a, IDLN_TYPE_FLOAT, idl_type_float)
-extern IDL_tree		IDL_type_float_new		(enum IDL_float_type f_type);
-
-struct _IDL_TYPE_FIXED {
-	IDL_tree positive_int_const;
-	IDL_tree integer_lit;
-};
-#define IDL_TYPE_FIXED(a)		IDL_CHECK_CAST(a, IDLN_TYPE_FIXED, idl_type_fixed)
-extern IDL_tree		IDL_type_fixed_new		(IDL_tree positive_int_const,
-							 IDL_tree integer_lit);
-
-enum IDL_integer_type {
-	IDL_INTEGER_TYPE_SHORT,
-	IDL_INTEGER_TYPE_LONG,
-	IDL_INTEGER_TYPE_LONGLONG
-};
-
-struct _IDL_TYPE_INTEGER {
-	unsigned f_signed		: 1;
-	enum IDL_integer_type f_type;
-};
-#define IDL_TYPE_INTEGER(a)		IDL_CHECK_CAST(a, IDLN_TYPE_INTEGER, idl_type_integer)
-extern IDL_tree		IDL_type_integer_new		(unsigned f_signed,
-							 enum IDL_integer_type f_type);
-
-extern IDL_tree		IDL_type_char_new		(void);
-extern IDL_tree		IDL_type_wide_char_new		(void);
-extern IDL_tree		IDL_type_boolean_new		(void);
-extern IDL_tree		IDL_type_octet_new		(void);
-extern IDL_tree		IDL_type_any_new		(void);
-extern IDL_tree		IDL_type_object_new		(void);
-extern IDL_tree		IDL_type_typecode_new		(void);
-
-struct _IDL_TYPE_STRING {
-	IDL_tree positive_int_const;
-};
-#define IDL_TYPE_STRING(a)		IDL_CHECK_CAST(a, IDLN_TYPE_STRING, idl_type_string)
-extern IDL_tree		IDL_type_string_new		(IDL_tree positive_int_const);
-
-struct _IDL_TYPE_WIDE_STRING {
-	IDL_tree positive_int_const;
-};
-#define IDL_TYPE_WIDE_STRING(a)		IDL_CHECK_CAST(a, IDLN_TYPE_WIDE_STRING, idl_type_wide_string)
-extern IDL_tree		IDL_type_wide_string_new	(IDL_tree positive_int_const);
-
-struct _IDL_TYPE_ENUM {
-	IDL_tree ident;
-	IDL_tree enumerator_list;
-};
-#define IDL_TYPE_ENUM(a)		IDL_CHECK_CAST(a, IDLN_TYPE_ENUM, idl_type_enum)
-extern IDL_tree		IDL_type_enum_new		(IDL_tree ident,
-							 IDL_tree enumerator_list);
-
-struct _IDL_TYPE_ARRAY {
-	IDL_tree ident;
-	IDL_tree size_list;
-};
-#define IDL_TYPE_ARRAY(a)		IDL_CHECK_CAST(a, IDLN_TYPE_ARRAY, idl_type_array)
-extern IDL_tree		IDL_type_array_new		(IDL_tree ident,
-							 IDL_tree size_list);
-
-struct _IDL_TYPE_SEQUENCE {
-	IDL_tree simple_type_spec;
-	IDL_tree positive_int_const;
-};
-#define IDL_TYPE_SEQUENCE(a)		IDL_CHECK_CAST(a, IDLN_TYPE_SEQUENCE, idl_type_sequence)
-extern IDL_tree		IDL_type_sequence_new		(IDL_tree simple_type_spec,
-							 IDL_tree positive_int_const);
-
-struct _IDL_TYPE_STRUCT {
-	IDL_tree ident;
-	IDL_tree member_list;
-};
-#define IDL_TYPE_STRUCT(a)		IDL_CHECK_CAST(a, IDLN_TYPE_STRUCT, idl_type_struct)
-extern IDL_tree		IDL_type_struct_new		(IDL_tree ident,
-							 IDL_tree member_list);
-
-struct _IDL_TYPE_UNION {
-	IDL_tree ident;
-	IDL_tree switch_type_spec;
-	IDL_tree switch_body;
-};
-#define IDL_TYPE_UNION(a)		IDL_CHECK_CAST(a, IDLN_TYPE_UNION, idl_type_union)
-extern IDL_tree		IDL_type_union_new		(IDL_tree ident,
-							 IDL_tree switch_type_spec,
-							 IDL_tree switch_body);
-struct _IDL_MEMBER {
-	IDL_tree type_spec;
-	IDL_tree dcls;
-};
-#define IDL_MEMBER(a)			IDL_CHECK_CAST(a, IDLN_MEMBER, idl_member)
-extern IDL_tree		IDL_member_new			(IDL_tree type_spec,
-							 IDL_tree dcls);
-
-struct _IDL_NATIVE {
-	IDL_tree ident;
-	char *user_type;		/* XPIDL extension */
-};
-#define IDL_NATIVE(a)			IDL_CHECK_CAST(a, IDLN_NATIVE, idl_native)
-extern IDL_tree		IDL_native_new			(IDL_tree ident);
-
-
-struct _IDL_TYPE_DCL {
-	IDL_tree type_spec;
-	IDL_tree dcls;
-};
-#define IDL_TYPE_DCL(a)			IDL_CHECK_CAST(a, IDLN_TYPE_DCL, idl_type_dcl)
-extern IDL_tree		IDL_type_dcl_new		(IDL_tree type_spec,
-							 IDL_tree dcls);
-
-struct _IDL_CONST_DCL {
-	IDL_tree const_type;
-	IDL_tree ident;
-	IDL_tree const_exp;
-};
-#define IDL_CONST_DCL(a)		IDL_CHECK_CAST(a, IDLN_CONST_DCL, idl_const_dcl)
-extern IDL_tree		IDL_const_dcl_new		(IDL_tree const_type,
-							 IDL_tree ident,
-							 IDL_tree const_exp);
-
-struct _IDL_EXCEPT_DCL {
-	IDL_tree ident;
-	IDL_tree members;
-};
-#define IDL_EXCEPT_DCL(a)		IDL_CHECK_CAST(a, IDLN_EXCEPT_DCL, idl_except_dcl)
-extern IDL_tree		IDL_except_dcl_new		(IDL_tree ident,
-							 IDL_tree members);
-
-struct _IDL_ATTR_DCL {
-	unsigned f_readonly		: 1;
-	IDL_tree param_type_spec;
-	IDL_tree simple_declarations;
-};
-#define IDL_ATTR_DCL(a)			IDL_CHECK_CAST(a, IDLN_ATTR_DCL, idl_attr_dcl)
-extern IDL_tree		IDL_attr_dcl_new		(unsigned f_readonly,
-							 IDL_tree param_type_spec,
-							 IDL_tree simple_declarations);
-
-struct _IDL_OP_DCL {
-	unsigned f_noscript		: 1;
-	unsigned f_oneway		: 1;
-	/* XPIDL extension (varags) */
-	unsigned f_varargs		: 1;
-	IDL_tree op_type_spec;
-	IDL_tree ident;
-	IDL_tree parameter_dcls;
-	IDL_tree raises_expr;
-	IDL_tree context_expr;
-};
-#define IDL_OP_DCL(a)			IDL_CHECK_CAST(a, IDLN_OP_DCL, idl_op_dcl)
-extern IDL_tree		IDL_op_dcl_new			(unsigned f_oneway,
-							 IDL_tree op_type_spec,
-							 IDL_tree ident,
-							 IDL_tree parameter_dcls,
-							 IDL_tree raises_expr,
-							 IDL_tree context_expr);
-
-enum IDL_param_attr {
-	IDL_PARAM_IN,
-	IDL_PARAM_OUT,
-	IDL_PARAM_INOUT
-};
-
-struct _IDL_PARAM_DCL {
-	enum IDL_param_attr attr;
-	IDL_tree param_type_spec;
-	IDL_tree simple_declarator;
-};
-#define IDL_PARAM_DCL(a)		IDL_CHECK_CAST(a, IDLN_PARAM_DCL, idl_param_dcl)
-extern IDL_tree		IDL_param_dcl_new		(enum IDL_param_attr attr,
-							 IDL_tree param_type_spec,
-							 IDL_tree simple_declarator);
-
-struct _IDL_CASE_STMT {
-	IDL_tree labels;
-	IDL_tree element_spec;
-};
-#define IDL_CASE_STMT(a)		IDL_CHECK_CAST(a, IDLN_CASE_STMT, idl_case_stmt)
-extern IDL_tree		IDL_case_stmt_new		(IDL_tree labels,
-							 IDL_tree element_spec);
-
-struct _IDL_INTERFACE {
-	IDL_tree ident;
-	IDL_tree inheritance_spec;
-	IDL_tree body;
-};
-#define IDL_INTERFACE(a)		IDL_CHECK_CAST(a, IDLN_INTERFACE, idl_interface)
-extern IDL_tree		IDL_interface_new		(IDL_tree ident,
-							 IDL_tree inheritance_spec,
-							 IDL_tree body);
-
-struct _IDL_FORWARD_DCL {
-	IDL_tree ident;
-};
-#define IDL_FORWARD_DCL(a)		IDL_CHECK_CAST(a, IDLN_FORWARD_DCL, idl_forward_dcl)
-extern IDL_tree		IDL_forward_dcl_new		(IDL_tree ident);
-
-struct _IDL_MODULE {
-	IDL_tree ident;
-	IDL_tree definition_list;
-};
-#define IDL_MODULE(a)			IDL_CHECK_CAST(a, IDLN_MODULE, idl_module)
-extern IDL_tree		IDL_module_new			(IDL_tree ident,
-							 IDL_tree definition_list);
-
-enum IDL_binop {
-	IDL_BINOP_OR,
-	IDL_BINOP_XOR,
-	IDL_BINOP_AND,
-	IDL_BINOP_SHR,
-	IDL_BINOP_SHL,
-	IDL_BINOP_ADD,
-	IDL_BINOP_SUB,
-	IDL_BINOP_MULT,
-	IDL_BINOP_DIV,
-	IDL_BINOP_MOD
-};
-
-struct _IDL_BINOP {
-	enum IDL_binop op;
-	IDL_tree left, right;
-};
-#define IDL_BINOP(a)			IDL_CHECK_CAST(a, IDLN_BINOP, idl_binop)
-extern IDL_tree		IDL_binop_new			(enum IDL_binop op,
-							 IDL_tree left,
-							 IDL_tree right);
-
-enum IDL_unaryop {
-	IDL_UNARYOP_PLUS,
-	IDL_UNARYOP_MINUS,
-	IDL_UNARYOP_COMPLEMENT
-};
-
-struct _IDL_UNARYOP {
-	enum IDL_unaryop op;
-	IDL_tree operand;
-};
-#define IDL_UNARYOP(a)			IDL_CHECK_CAST(a, IDLN_UNARYOP, idl_unaryop)
-extern IDL_tree		IDL_unaryop_new			(enum IDL_unaryop op,
-							 IDL_tree operand);
-
-/* XPIDL code fragments extension. */
-struct _IDL_CODEFRAG {
-	char *desc;
-	GSList *lines;
-};
-#define IDL_CODEFRAG(a)			IDL_CHECK_CAST(a, IDLN_CODEFRAG, idl_codefrag)
-extern IDL_tree		IDL_codefrag_new		(char *desc,
-							 GSList *lines);
-
-/*
- * IDL_tree_type - Enumerations of node types
- *
- * Note this enumerator list is subject to change in the future. A program should not need
- * more than a recompilation to adjust for a change in this list, so instead of using a
- * statically initialized jumptable, allocate an array of size IDLN_LAST and assign the
- * elements manually.
- */
-typedef enum {
-	IDLN_NONE,
-	IDLN_ANY,
-
-	IDLN_LIST,
-	IDLN_GENTREE,
-	IDLN_INTEGER,
-	IDLN_STRING,
-	IDLN_WIDE_STRING,
-	IDLN_CHAR,
-	IDLN_WIDE_CHAR,
-	IDLN_FIXED,
-	IDLN_FLOAT,
-	IDLN_BOOLEAN,
-	IDLN_IDENT,
-	IDLN_TYPE_DCL,
-	IDLN_CONST_DCL,
-	IDLN_EXCEPT_DCL,
-	IDLN_ATTR_DCL,
-	IDLN_OP_DCL,
-	IDLN_PARAM_DCL,
-	IDLN_FORWARD_DCL,
-	IDLN_TYPE_INTEGER,
-	IDLN_TYPE_FLOAT,
-	IDLN_TYPE_FIXED,
-	IDLN_TYPE_CHAR,
-	IDLN_TYPE_WIDE_CHAR,
-	IDLN_TYPE_STRING,
-	IDLN_TYPE_WIDE_STRING,
-	IDLN_TYPE_BOOLEAN,
-	IDLN_TYPE_OCTET,
-	IDLN_TYPE_ANY,
-	IDLN_TYPE_OBJECT,
-	IDLN_TYPE_TYPECODE,
-	IDLN_TYPE_ENUM,
-	IDLN_TYPE_SEQUENCE,
-	IDLN_TYPE_ARRAY,
-	IDLN_TYPE_STRUCT,
-	IDLN_TYPE_UNION,
-	IDLN_MEMBER,
-	IDLN_NATIVE,
-	IDLN_CASE_STMT,
-	IDLN_INTERFACE,
-	IDLN_MODULE,
-	IDLN_BINOP,
-	IDLN_UNARYOP,
-	IDLN_CODEFRAG,
-	
-	IDLN_LAST
-} IDL_tree_type;
-IDL_IMPORT const char *			IDL_tree_type_names[];
-
-struct _IDL_tree_node {
-	IDL_tree_type _type;
-	IDL_tree up;			/* Do not recurse */
-	IDL_declspec_t declspec;
-	/* properties is an XPIDL extension.  It is a hash table of
-	 * case-insensitive string keys to string values. */
-	GHashTable *properties;
-	int refs;
-	char *_file;			/* Internal use */
-	int _line;			/* Internal use */
-	union {
-		struct _IDL_LIST idl_list;
-		struct _IDL_GENTREE idl_gentree;
-		struct _IDL_INTEGER idl_integer;
-		struct _IDL_STRING idl_string;
-		struct _IDL_WIDE_STRING idl_wide_string;
-		struct _IDL_CHAR idl_char;
-		struct _IDL_WIDE_CHAR idl_wide_char;
-		struct _IDL_FIXED idl_fixed;
-		struct _IDL_FLOAT idl_float;
-		struct _IDL_BOOLEAN idl_boolean;
-		struct _IDL_IDENT idl_ident;
-		struct _IDL_TYPE_DCL idl_type_dcl;
-		struct _IDL_CONST_DCL idl_const_dcl;
-		struct _IDL_EXCEPT_DCL idl_except_dcl;
-		struct _IDL_ATTR_DCL idl_attr_dcl;
-		struct _IDL_OP_DCL idl_op_dcl;
-		struct _IDL_PARAM_DCL idl_param_dcl;
-		struct _IDL_FORWARD_DCL idl_forward_dcl;
-		struct _IDL_TYPE_FLOAT idl_type_float;
-		struct _IDL_TYPE_FIXED idl_type_fixed;
-		struct _IDL_TYPE_INTEGER idl_type_integer;
-		struct _IDL_TYPE_ENUM idl_type_enum;
-		struct _IDL_TYPE_STRING idl_type_string;
-		struct _IDL_TYPE_WIDE_STRING idl_type_wide_string;
-		struct _IDL_TYPE_SEQUENCE idl_type_sequence;
-		struct _IDL_TYPE_ARRAY idl_type_array;
-		struct _IDL_TYPE_STRUCT idl_type_struct;
-		struct _IDL_TYPE_UNION idl_type_union;
-		struct _IDL_MEMBER idl_member;
-		struct _IDL_NATIVE idl_native;
-		struct _IDL_CASE_STMT idl_case_stmt;
-		struct _IDL_INTERFACE idl_interface;
-		struct _IDL_MODULE idl_module;
-		struct _IDL_BINOP idl_binop;
-		struct _IDL_UNARYOP idl_unaryop;
-		struct _IDL_CODEFRAG idl_codefrag;
-	} u;
-};
-#define IDL_NODE_TYPE(a)		((a)->_type)
-#define IDL_NODE_TYPE_NAME(a)		((a)?IDL_tree_type_names[IDL_NODE_TYPE(a)]:"NULL")
-#define IDL_NODE_UP(a)			((a)->up)
-#define IDL_NODE_PROPERTIES(a)		((a)->properties)
-#define IDL_NODE_DECLSPEC(a)		((a)->declspec)
-#define IDL_NODE_REFS(a)		((a)->refs)
-#define IDL_NODE_IS_LITERAL(a)				\
-	(IDL_NODE_TYPE(a) == IDLN_INTEGER ||		\
-	 IDL_NODE_TYPE(a) == IDLN_STRING ||		\
-	 IDL_NODE_TYPE(a) == IDLN_WIDE_STRING ||	\
-	 IDL_NODE_TYPE(a) == IDLN_CHAR ||		\
-	 IDL_NODE_TYPE(a) == IDLN_WIDE_CHAR ||		\
-	 IDL_NODE_TYPE(a) == IDLN_FIXED ||		\
-	 IDL_NODE_TYPE(a) == IDLN_FLOAT ||		\
-	 IDL_NODE_TYPE(a) == IDLN_BOOLEAN)
-#define IDL_NODE_IS_TYPE(a)				\
-	(IDL_NODE_TYPE(a) == IDLN_TYPE_INTEGER ||	\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_STRING ||	\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_WIDE_STRING ||	\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_CHAR ||		\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_WIDE_CHAR ||	\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_FIXED ||		\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_FLOAT ||		\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_BOOLEAN ||	\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_OCTET ||		\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_ANY ||		\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_OBJECT ||	\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_TYPECODE ||	\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_ENUM ||		\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_ARRAY ||		\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_SEQUENCE ||	\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_STRUCT ||	\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_UNION)
-#define IDL_NODE_IS_SCOPED(a)				\
-	(IDL_NODE_TYPE(a) == IDLN_IDENT ||		\
-	 IDL_NODE_TYPE(a) == IDLN_INTERFACE ||		\
-	 IDL_NODE_TYPE(a) == IDLN_MODULE ||		\
-	 IDL_NODE_TYPE(a) == IDLN_EXCEPT_DCL ||		\
-	 IDL_NODE_TYPE(a) == IDLN_OP_DCL ||		\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_ENUM ||		\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_STRUCT ||	\
-	 IDL_NODE_TYPE(a) == IDLN_TYPE_UNION)
-	
-typedef struct _IDL_ns *		IDL_ns;
-
-struct _IDL_ns {
-	IDL_tree global;
-	IDL_tree file;
-	IDL_tree current;
-	GHashTable *inhibits;
-	GHashTable *filename_hash;
-};
-#define IDL_NS(a)			(*(a))
-
-typedef enum {
-	IDL_INPUT_REASON_INIT,
-	IDL_INPUT_REASON_FILL,
-	IDL_INPUT_REASON_ABORT,
-	IDL_INPUT_REASON_FINISH
-} IDL_input_reason;
-
-union IDL_input_data {
-	struct {
-		const char *filename;
-	} init;
-	struct {
-		char *buffer;
-		size_t max_size;
-	} fill;
-};
-
-typedef int		(*IDL_input_callback)		(IDL_input_reason reason,
-							 union IDL_input_data *data,
-							 gpointer user_data);
-
-typedef int		(*IDL_msg_callback)		(int level,
-							 int num,
-							 int line,
-							 const char *filename,
-							 const char *message);
-
-typedef struct _IDL_tree_func_state	IDL_tree_func_state;
-typedef struct _IDL_tree_func_data	IDL_tree_func_data;
-
-/* Traversal state data.  Recursive walks chain states. */
-struct _IDL_tree_func_state {
-	IDL_tree_func_state *up;
-	IDL_tree start;
-	IDL_tree_func_data *bottom;
-};
-
-/* This holds a list of the up hierarchy traversed, beginning from traversal.  This is
- * useful since nodes referenced after initial definition will have a different traversal
- * path than the actual up path. */
-struct _IDL_tree_func_data {
-	IDL_tree_func_state *state;
-	IDL_tree_func_data *up;
-	IDL_tree tree;
-};
-
-typedef gboolean	(*IDL_tree_func)		(IDL_tree_func_data *tnfd,
-							 gpointer user_data);
-
-extern IDL_tree		IDL_check_type_cast		(const IDL_tree var,
-							 IDL_tree_type type,
-							 const char *file,
-							 int line,
-							 const char *function);
-	
-extern const char *	IDL_get_libver_string		(void);
-
-extern const char *	IDL_get_IDLver_string		(void);
-
-extern int		IDL_parse_filename		(const char *filename,
-							 const char *cpp_args,
-							 IDL_msg_callback msg_cb,
-							 IDL_tree *tree, IDL_ns *ns,
-							 unsigned long parse_flags,
-							 int max_msg_level);
-
-extern int		IDL_parse_filename_with_input	(const char *filename,
-							 IDL_input_callback input_cb,
-							 gpointer input_cb_user_data,
-							 IDL_msg_callback msg_cb,
-							 IDL_tree *tree, IDL_ns *ns,
-							 unsigned long parse_flags,
-							 int max_msg_level);
-
-extern int		IDL_ns_prefix			(IDL_ns ns,
-							 const char *s);
-
-extern void		IDL_ns_ID			(IDL_ns ns,
-							 const char *s);
-	
-extern void		IDL_ns_version			(IDL_ns ns,
-							 const char *s);
-
-extern int		IDL_inhibit_get			(void);
-
-extern void		IDL_inhibit_push		(void);
-
-extern void		IDL_inhibit_pop			(void);
-
-extern void		IDL_file_set			(const char *filename,
-							 int line);
-
-extern void		IDL_file_get			(const char **filename,
-							 int *line);
-
-extern IDL_tree		IDL_get_parent_node		(IDL_tree p,
-							 IDL_tree_type type,
-							 int *scope_levels);
-
-extern IDL_tree		IDL_tree_get_scope		(IDL_tree p);
-
-extern int		IDL_tree_get_node_info		(IDL_tree tree,
-							 char **who,
-							 char **what);
-
-extern void		IDL_tree_error			(IDL_tree p,
-							 const char *fmt,
-							 ...);
-
-extern void		IDL_tree_warning		(IDL_tree p,
-							 int level,
-							 const char *fmt,
-							 ...);
-
-extern const char *	IDL_tree_property_get		(IDL_tree tree,
-							 const char *key);
-
-extern void		IDL_tree_property_set		(IDL_tree tree,
-							 const char *key,
-							 const char *value);
-
-extern gboolean		IDL_tree_property_remove	(IDL_tree tree,
-							 const char *key);
-
-extern void		IDL_tree_properties_copy	(IDL_tree from_tree,
-							 IDL_tree to_tree);
-
-extern void		IDL_tree_walk			(IDL_tree p,
-							 IDL_tree_func_data *current,
-							 IDL_tree_func pre_tree_func,
-							 IDL_tree_func post_tree_func,
-							 gpointer user_data);
-
-extern void		IDL_tree_walk_in_order		(IDL_tree p,
-							 IDL_tree_func tree_func,
-							 gpointer user_data);
-
-extern void		IDL_tree_free			(IDL_tree root);
-
-extern void		IDL_tree_to_IDL			(IDL_tree p,
-							 IDL_ns ns,
-							 FILE *output,
-							 unsigned long output_flags);
-
-extern char *		IDL_do_escapes			(const char *s);
-
-extern IDL_tree		IDL_resolve_const_exp		(IDL_tree p,
-							 IDL_tree_type type);
-	
-extern IDL_ns		IDL_ns_new			(void);
-
-extern void		IDL_ns_free			(IDL_ns ns);
-
-extern IDL_tree		IDL_ns_resolve_this_scope_ident	(IDL_ns ns,
-							 IDL_tree scope,
-							 IDL_tree ident);
-
-extern IDL_tree		IDL_ns_resolve_ident		(IDL_ns ns,
-							 IDL_tree ident);
-
-extern IDL_tree		IDL_ns_lookup_this_scope	(IDL_ns ns,
-							 IDL_tree scope,
-							 IDL_tree ident,
-							 gboolean *conflict);
-
-extern IDL_tree		IDL_ns_lookup_cur_scope		(IDL_ns ns,
-							 IDL_tree ident,
-							 gboolean *conflict);
-
-extern IDL_tree		IDL_ns_place_new		(IDL_ns ns,
-							 IDL_tree ident);
-
-extern void		IDL_ns_push_scope		(IDL_ns ns,
-							 IDL_tree ident);
-
-extern void		IDL_ns_pop_scope		(IDL_ns ns);
-
-extern IDL_tree		IDL_ns_qualified_ident_new	(IDL_tree nsid);
-
-extern char *		IDL_ns_ident_to_qstring		(IDL_tree ns_ident,
-							 const char *join,
-							 int scope_levels);
-
-extern int		IDL_ns_scope_levels_from_here	(IDL_ns ns,
-							 IDL_tree ident,
-							 IDL_tree parent);
-
-extern char *		IDL_ns_ident_make_repo_id	(IDL_ns ns,
-							 IDL_tree p,
-							 const char *p_prefix,
-							 int *major,
-							 int *minor);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __IDL_H */

buildtools/windows/install.bat

@@ -1,50 +0,0 @@
-@echo off
-if "%MOZ_TOOLS%" == "" goto no_moz_tools
-
-echo.
-echo MOZ_TOOLS is set to %MOZ_TOOLS%
-echo.
-
-echo copying exes and dlls to %MOZ_TOOLS%\bin
-if not exist %MOZ_TOOLS%\bin\NUL mkdir %MOZ_TOOLS%\bin >NUL
-copy bin\x86\* %MOZ_TOOLS%\bin >NUL
-
-echo copying include files to %MOZ_TOOLS%\include
-if not exist %MOZ_TOOLS%\include\NUL mkdir %MOZ_TOOLS%\include >NUL
-copy include\* %MOZ_TOOLS%\include >NUL
-
-echo copying include files to %MOZ_TOOLS%\include\libIDL
-if not exist %MOZ_TOOLS%\include\libIDL\NUL mkdir %MOZ_TOOLS%\include\libIDL >NUL
-copy include\libIDL\* %MOZ_TOOLS%\include\libIDL  >NUL
-
-echo copying lib files to %MOZ_TOOLS%\lib
-if not exist %MOZ_TOOLS%\lib\NUL mkdir %MOZ_TOOLS%\lib >NUL
-copy lib\* %MOZ_TOOLS%\lib >NUL
-
-echo.
-echo done copying
-echo.
-echo make sure that MOZ_TOOLS\bin is on your path
-echo.
-goto done
-
-:no_moz_tools
-echo.
-echo. ERROR!
-echo.
-echo You need to set MOZ_TOOLS in your environment.
-echo MOZ_TOOLS should be the name of a directory that 
-echo you create to hold these tools. 
-echo.
-echo. e.g.
-echo.   mkdir c:\moz_tools
-echo.   set MOZ_TOOLS=c:\moz_tools
-echo.
-echo MOZ_TOOLS should be set permanently so that it is 
-echo available to the build system whenever mozilla is building.
-echo.
-echo.
-echo Please set MOZ_TOOLS and run install.bat again
-echo.
-
-:done

buildtools/windows/source/glib/README

@@ -1,12 +0,0 @@
-Sources for glib are available from gnome.org via cvs.  See cvs
-checkout instructions at http://www.gnome.org - or use
-
-export CVSROOT=:pserver:anonymous@anoncvs.gnome.org:/cvs/gnome
-cvs login (no password)
-cvs -z3 checkout glib
-
-or grap a package of the sources we're currently using from
-ftp://ftp.mozilla.org/pub/mozilla/libraries/source/
-
-These sources correspond to the GLIB_1_2_0 tag on the gnome cvs
-server.

buildtools/windows/source/libIDL/README

@@ -1,14 +0,0 @@
-Sources for libIDL are available from gnome.org via cvs.  See cvs
-checkout instructions at http://www.gnome.org - or use
-
-export CVSROOT=:pserver:anonymous@anoncvs.gnome.org:/cvs/gnome
-cvs login (no password)
-cvs -z3 checkout ORBit
-
-(libIDL files are in ORBit/libIDL)
-
-or grap a package of the sources we're currently using from
-ftp://ftp.mozilla.org/pub/mozilla/libraries/source/
-
-These sources correspond to the LIBIDL_V0_6_3 tag on the gnome cvs
-server.

buildtools/windows/source/make-3.79.1/ABOUT-NLS

@@ -1,226 +0,0 @@
-Notes on the Free Translation Project
-*************************************
-
-   Free software is going international!  The Free Translation Project
-is a way to get maintainers of free software, translators, and users all
-together, so that will gradually become able to speak many languages.
-A few packages already provide translations for their messages.
-
-   If you found this `ABOUT-NLS' file inside a distribution, you may
-assume that the distributed package does use GNU `gettext' internally,
-itself available at your nearest GNU archive site.  But you do *not*
-need to install GNU `gettext' prior to configuring, installing or using
-this package with messages translated.
-
-   Installers will find here some useful hints.  These notes also
-explain how users should proceed for getting the programs to use the
-available translations.  They tell how people wanting to contribute and
-work at translations should contact the appropriate team.
-
-   When reporting bugs in the `intl/' directory or bugs which may be
-related to internationalization, you should tell about the version of
-`gettext' which is used.  The information can be found in the
-`intl/VERSION' file, in internationalized packages.
-
-One advise in advance
-=====================
-
-   If you want to exploit the full power of internationalization, you
-should configure it using
-
-     ./configure --with-included-gettext
-
-to force usage of internationalizing routines provided within this
-package, despite the existence of internationalizing capabilities in the
-operating system where this package is being installed.  So far, only
-the `gettext' implementation in the GNU C library version 2 provides as
-many features (such as locale alias or message inheritance) as the
-implementation here.  It is also not possible to offer this additional
-functionality on top of a `catgets' implementation.  Future versions of
-GNU `gettext' will very likely convey even more functionality.  So it
-might be a good idea to change to GNU `gettext' as soon as possible.
-
-   So you need not provide this option if you are using GNU libc 2 or
-you have installed a recent copy of the GNU gettext package with the
-included `libintl'.
-
-INSTALL Matters
-===============
-
-   Some packages are "localizable" when properly installed; the
-programs they contain can be made to speak your own native language.
-Most such packages use GNU `gettext'.  Other packages have their own
-ways to internationalization, predating GNU `gettext'.
-
-   By default, this package will be installed to allow translation of
-messages.  It will automatically detect whether the system provides
-usable `catgets' (if using this is selected by the installer) or
-`gettext' functions.  If neither is available, the GNU `gettext' own
-library will be used.  This library is wholly contained within this
-package, usually in the `intl/' subdirectory, so prior installation of
-the GNU `gettext' package is *not* required.  Installers may use
-special options at configuration time for changing the default
-behaviour.  The commands:
-
-     ./configure --with-included-gettext
-     ./configure --with-catgets
-     ./configure --disable-nls
-
-will respectively bypass any pre-existing `catgets' or `gettext' to use
-the internationalizing routines provided within this package, enable
-the use of the `catgets' functions (if found on the locale system), or
-else, *totally* disable translation of messages.
-
-   When you already have GNU `gettext' installed on your system and run
-configure without an option for your new package, `configure' will
-probably detect the previously built and installed `libintl.a' file and
-will decide to use this.  This might be not what is desirable.  You
-should use the more recent version of the GNU `gettext' library.  I.e.
-if the file `intl/VERSION' shows that the library which comes with this
-package is more recent, you should use
-
-     ./configure --with-included-gettext
-
-to prevent auto-detection.
-
-   By default the configuration process will not test for the `catgets'
-function and therefore they will not be used.  The reasons are already
-given above: the emulation on top of `catgets' cannot provide all the
-extensions provided by the GNU `gettext' library.  If you nevertheless
-want to use the `catgets' functions use
-
-     ./configure --with-catgets
-
-to enable the test for `catgets' (this causes no harm if `catgets' is
-not available on your system).  If you really select this option we
-would like to hear about the reasons because we cannot think of any
-good one ourself.
-
-   Internationalized packages have usually many `po/LL.po' files, where
-LL gives an ISO 639 two-letter code identifying the language.  Unless
-translations have been forbidden at `configure' time by using the
-`--disable-nls' switch, all available translations are installed
-together with the package.  However, the environment variable `LINGUAS'
-may be set, prior to configuration, to limit the installed set.
-`LINGUAS' should then contain a space separated list of two-letter
-codes, stating which languages are allowed.
-
-Using This Package
-==================
-
-   As a user, if your language has been installed for this package, you
-only have to set the `LANG' environment variable to the appropriate
-ISO 639 `LL' two-letter code prior to using the programs in the
-package.  For example, let's suppose that you speak German.  At the
-shell prompt, merely execute `setenv LANG de' (in `csh'),
-`export LANG; LANG=de' (in `sh') or `export LANG=de' (in `bash').  This
-can be done from your `.login' or `.profile' file, once and for all.
-
-   An operating system might already offer message localization for
-many of its programs, while other programs have been installed locally
-with the full capabilities of GNU `gettext'.  Just using `gettext'
-extended syntax for `LANG' would break proper localization of already
-available operating system programs.  In this case, users should set
-both `LANGUAGE' and `LANG' variables in their environment, as programs
-using GNU `gettext' give preference to `LANGUAGE'.  For example, some
-Swedish users would rather read translations in German than English for
-when Swedish is not available.  This is easily accomplished by setting
-`LANGUAGE' to `sv:de' while leaving `LANG' to `sv'.
-
-Translating Teams
-=================
-
-   For the Free Translation Project to be a success, we need interested
-people who like their own language and write it well, and who are also
-able to synergize with other translators speaking the same language.
-Each translation team has its own mailing list, courtesy of Linux
-International.  You may reach your translation team at the address
-`LL@li.org', replacing LL by the two-letter ISO 639 code for your
-language.  Language codes are *not* the same as the country codes given
-in ISO 3166.  The following translation teams exist, as of December
-1997:
-
-     Chinese `zh', Czech `cs', Danish `da', Dutch `nl', English `en',
-     Esperanto `eo', Finnish `fi', French `fr', German `de', Hungarian
-     `hu', Irish `ga', Italian `it', Indonesian `id', Japanese `ja',
-     Korean `ko', Latin `la', Norwegian `no', Persian `fa', Polish
-     `pl', Portuguese `pt', Russian `ru', Slovenian `sl', Spanish `es',
-     Swedish `sv', and Turkish `tr'.
-
-For example, you may reach the Chinese translation team by writing to
-`zh@li.org'.
-
-   If you'd like to volunteer to *work* at translating messages, you
-should become a member of the translating team for your own language.
-The subscribing address is *not* the same as the list itself, it has
-`-request' appended.  For example, speakers of Swedish can send a
-message to `sv-request@li.org', having this message body:
-
-     subscribe
-
-   Keep in mind that team members are expected to participate
-*actively* in translations, or at solving translational difficulties,
-rather than merely lurking around.  If your team does not exist yet and
-you want to start one, or if you are unsure about what to do or how to
-get started, please write to `translation@iro.umontreal.ca' to reach the
-coordinator for all translator teams.
-
-   The English team is special.  It works at improving and uniformizing
-the terminology in use.  Proven linguistic skill are praised more than
-programming skill, here.
-
-Available Packages
-==================
-
-   Languages are not equally supported in all packages.  The following
-matrix shows the current state of internationalization, as of December
-1997.  The matrix shows, in regard of each package, for which languages
-PO files have been submitted to translation coordination.
-
-     Ready PO files    cs da de en es fi fr it ja ko nl no pl pt ru sl sv
-                     .----------------------------------------------------.
-     bash            |       []          []          []                   |  3
-     bison           |       []          []          []                   |  3
-     clisp           |       [] [] []    []                               |  4
-     cpio            |       []    []    []       [] []    []             |  6
-     diffutils       |       []    []    []                []          [] |  5
-     enscript        |       []    [] [] []          []             []    |  6
-     fileutils       | []    []    []    []       [] []    [] []    [] [] | 10
-     findutils       |       []    []    [] []    [] []    []    []    [] |  9
-     flex            |             []    []       []                   [] |  4
-     gcal            |       []          []          []    []          [] |  5
-     gettext         |    [] []    []    []       [] [] [] [] []    [] [] | 12
-     grep            |       []    []    []       [] [] [] []    [] [] [] | 10
-     hello           |    [] []    []    []       [] [] [] [] []    [] [] | 11
-     id-utils        |       []          []                []             |  3
-     indent          |    [] []                   []       []    []       |  5
-     libc            |       []    []    []       [] []    []          [] |  7
-     m4              |       []          []    []    []          []    [] |  6
-     make            |       []    []    []       [] []    []             |  6
-     music           |                   []                []             |  2
-     ptx             |       []    []    []          [] [] [] []       [] |  8
-     recode          |    [] []    []    []          []    [] []    [] [] |  9
-     sh-utils        |       []    []    []          [] [] [] []       [] |  8
-     sharutils       | []    []    []    []          []                [] |  6
-     tar             | []    []          [] []    [] [] [] [] []    [] [] | 11
-     texinfo         | []    []          []                               |  3
-     textutils       | []    []    []    []       [] [] [] []          [] |  9
-     wdiff           | []    []    []    []          [] [] []          [] |  8
-                     `----------------------------------------------------'
-       17 languages    cs da de en es fi fr it ja ko nl no pl pt ru sl sv
-       27 packages      6  4 25  1 18  1 26  2  1 12 20  9 19  7  4  7 17  179
-
-   Some counters in the preceding matrix are higher than the number of
-visible blocks let us expect.  This is because a few extra PO files are
-used for implementing regional variants of languages, or language
-dialects.
-
-   For a PO file in the matrix above to be effective, the package to
-which it applies should also have been internationalized and
-distributed as such by its maintainer.  There might be an observable
-lag between the mere existence a PO file and its wide availability in a
-distribution.
-
-   If December 1997 seems to be old, you may fetch a more recent copy
-of this `ABOUT-NLS' file on most GNU archive sites.
-

buildtools/windows/source/make-3.79.1/AUTHORS

@@ -1,56 +0,0 @@
------------------------------------
-
-GNU make development up to version 3.75 by:
-    Roland McGrath <roland@gnu.org>
-
-
-Development starting with GNU make 3.76 by:
-    Paul D. Smith <psmith@gnu.org>
-
-
-GNU Make User's Manual
-  Written by:
-    Richard M. Stallman <rms@gnu.org>
-
-  Edited by:
-    Roland McGrath <roland@gnu.org>
-    Bob Chassell <bob@gnu.org>
-    Melissa Weisshaus <melissa@gnu.org>
-    Paul D. Smith <psmith@gnu.org>
-
------------------------------------
-GNU make porting efforts:
-
-  Port to VMS by:
-      Klaus Kaempf <kkaempf@progis.de>
-      Archive support/Bug fixes by:
-        John W. Eaton <jwe@bevo.che.wisc.edu>
-        Martin Zinser <zinser@decus.decus.de>
-
-  Port to Amiga by:
-      Aaron Digulla <digulla@fh-konstanz.de>
-
-
-  Port to MS-DOS (DJGPP) and MS-Windows 95/NT by:
-      DJ Delorie <dj@delorie.com>
-      Rob Tulloh <rob_tulloh@tivoli.com>
-      Eli Zaretskii <eliz@is.elta.co.il>
-
------------------------------------
-Other contributors:
-
-  Janet Carson <janet_carson@tivoli.com>
-  Howard Chu <hyc@highlandsun.com>
-  Paul Eggert <eggert@twinsun.com>
-  Klaus Heinz <kamar@ease.rhein-main.de>
-  Michael Joosten
-  Jim Kelton <jim_kelton@tivoli.com>
-  David Lubbren <uhay@rz.uni-karlsruhe.de>
-  Tim Magill <tim.magill@telops.gte.com>
-  Han-Wen Nienhuys <hanwen@cs.uu.nl>
-  Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-  Carl Staelin (Princeton University)
-  Ian Stewartson (Data Logic Limited)
-
-With suggestions/comments/bug reports from a cast of ... well ...
-hundreds, anyway :)

buildtools/windows/source/make-3.79.1/COPYING

@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                          59 Temple Place - Suite 330, Boston, MA
-                          02111-1307, USA.
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	Appendix: How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) 19yy name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.

buildtools/windows/source/make-3.79.1/INSTALL

@@ -1,187 +0,0 @@
-Basic Installation
-==================
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
-   The file `configure.in' is used to create `configure' by a program
-called `autoconf'.  You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-     If you're building GNU make on a system which does not already have
-     a `make', you can use the build.sh shell script to compile.  Run
-     `sh ./build.sh'.  This should compile the program in the current
-     directory.  Then you will have a Make program that you can use for
-     `make install', or whatever else.
-
-  3. Optionally, type `./make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
-initial values for variables by setting them in the environment.  Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory.  After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on.  Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
-     CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
-   If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
-
-`--help'
-     Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--version'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
-

buildtools/windows/source/make-3.79.1/Makefile.DOS

@@ -1,586 +0,0 @@
-# -*-Makefile-*- template for DJGPP
-# Makefile.in generated automatically by automake 1.2 from Makefile.am
-
-# Copyright (C) 1994, 1995-1998, 1999 Free Software Foundation, Inc.
-# This Makefile.DOS is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-
-SHELL = /bin/sh
-
-srcdir = .
-VPATH = $(srcdir)
-# $DJDIR is defined automatically by DJGPP to point
-# to the root of the DJGPP installation tree.
-prefix = /dev/env/DJDIR
-exec_prefix = ${prefix}
-
-bindir = /bin
-datadir = /share
-libdir = /lib
-infodir = /info
-mandir = /man
-includedir = /include
-oldincludedir = c:/djgpp/include
-
-DESTDIR = /dev/env/DJDIR
-
-pkgdatadir = $(datadir)/make
-pkglibdir = $(libdir)/make
-pkgincludedir = $(includedir)/make
-localedir = $(datadir)/locale
-
-INSTALL = ${exec_prefix}/bin/ginstall -c
-INSTALL_PROGRAM = ${exec_prefix}/bin/ginstall -c
-INSTALL_DATA = ${exec_prefix}/bin/ginstall -c -m 644
-INSTALL_SCRIPT = ${exec_prefix}/bin/ginstall -c
-transform = s,x,x,
-
-# This will fail even if they don't have a Unix-like shell (stock DOS
-# shell doesn't know about `false').  The only difference is that they
-# get "Error -1" instead of "Error 1".
-EXIT_FAIL = false
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-AR = ar
-CC = gcc
-CPP = gcc -E
-LIBOBJS =
-MAKEINFO = ${exec_prefix}/bin/makeinfo
-PACKAGE = make
-PERL = perl
-RANLIB = ranlib
-REMOTE = stub
-VERSION = 3.79.1
-
-AUTOMAKE_OPTIONS = 1.2
-
-bin_PROGRAMS =	make
-
-make_SOURCES =	ar.c arscan.c commands.c dir.c expand.c file.c function.c getopt.c implicit.c job.c main.c misc.c read.c remake.c rule.c signame.c variable.c vpath.c default.c version.c getopt1.c remote-$(REMOTE).c
-# This should include the glob/ prefix
-libglob_a_SOURCES =	glob/fnmatch.c glob/glob.c glob/fnmatch.h glob/glob.h
-make_LDADD =	  glob/libglob.a
-
-info_TEXINFOS =	make.texinfo
-man_MANS =	make.1
-
-INCLUDES =	-I$(srcdir)/glob -DLIBDIR=\"c:/djgpp/lib\" -DINCLUDEDIR=\"c:/djgpp/include\" -DLOCALEDIR=\"$(localedir)\"
-
-BUILT_SOURCES =	README build.sh-in
-
-EXTRA_DIST = 	$(BUILT_SOURCES) $(man_MANS) README.customs remote-cstms.c  make-stds.texi texinfo.tex SCOPTIONS SMakefile  Makefile.ami README.Amiga config.ami amiga.c amiga.h  NMakefile README.DOS configh.dos configure.bat makefile.com  README.W32 build_w32.bat config.h-W32 subproc.bat make.lnk  config.h-vms makefile.vms readme.vms vmsdir.h vmsfunctions.c  vmsify.c
-
-SUBDIRS =	glob
-mkinstalldirs = ${exec_prefix}/bin/gmkdir -p
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =  build.sh
-PROGRAMS =  $(bin_PROGRAMS)
-
-MAKE_HOST = i386-pc-msdosdjgpp
-
-
-DEFS =  -I. -I$(srcdir) -I.
-CPPFLAGS = -DHAVE_CONFIG_H
-LDFLAGS =
-LIBS =
-make_OBJECTS =  ar.o arscan.o commands.o dir.o expand.o file.o function.o getopt.o implicit.o job.o main.o misc.o read.o remake.o rule.o signame.o variable.o vpath.o default.o version.o getopt1.o remote-$(REMOTE).o
-make_DEPENDENCIES =    glob/libglob.a
-make_LDFLAGS =
-libglob_a_LIBADD =
-libglob_a_OBJECTS =  fnmatch.o glob.o
-noinst_LIBRARIES =	glob/libglob.a
-CFLAGS = -O2 -g
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
-LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
-TEXI2DVI = texi2dvi
-TEXINFO_TEX = $(srcdir)/texinfo.tex
-INFO_DEPS = make.info
-DVIS = make.dvi
-TEXINFOS = make.texinfo
-man1dir = $(mandir)/man1
-MANS = $(man_MANS)
-
-NROFF = nroff
-DIST_COMMON =  README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL Makefile.am  Makefile.in NEWS acconfig.h aclocal.m4 alloca.c build.sh.in config.h.in  configure configure.in getloadavg.c gettext.c install-sh missing mkinstalldirs  stamp-h.in texinfo.tex
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP = --best
-SOURCES = $(make_SOURCES)
-OBJECTS = $(make_OBJECTS)
-HEADERS = $(wildcard $(srcdir)/*.h)
-
-default: all
-
-.SUFFIXES:
-.SUFFIXES: .S .c .dvi .info .o .ps .s .texi .texinfo .txi
-
-mostlyclean-hdr:
-
-clean-hdr:
-
-distclean-hdr:
-	-rm -f config.h
-
-maintainer-clean-hdr:
-
-mostlyclean-binPROGRAMS:
-
-clean-binPROGRAMS:
-	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-
-distclean-binPROGRAMS:
-
-maintainer-clean-binPROGRAMS:
-
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(bindir)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do    if test -f $$p; then      echo "  $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p | sed '$(transform)'`";       $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p | sed '$(transform)'`;    else :; fi;  done
-
-uninstall-binPROGRAMS:
-	$(NORMAL_UNINSTALL)
-	list='$(bin_PROGRAMS)'; for p in $$list; do    rm -f $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`.exe;  done
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-mostlyclean-compile:
-	-rm -f *.o *.exe make.new core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c *_tab.c
-
-maintainer-clean-compile:
-
-make: $(make_OBJECTS) $(make_DEPENDENCIES)
-	@command.com /c if exist make del make
-	@command.com /c if exist make.exe del make.exe
-	$(LINK) $(make_LDFLAGS) $(make_OBJECTS) $(make_LDADD) $(LIBS)
-
-make.info: make.texinfo
-make.dvi: make.texinfo
-
-
-DVIPS = dvips
-
-.texi.info:
-	$(MAKEINFO) $(srcdir)/$< -o ./$@
-
-.texi.dvi:
-	TEXINPUTS="$(srcdir);$$TEXINPUTS"    MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.texi:
-	$(MAKEINFO) $(srcdir)/$< -o ./$@
-
-.texinfo.info:
-	$(MAKEINFO) $(srcdir)/$< -o ./$@
-
-.texinfo:
-	$(MAKEINFO) $(srcdir)/$< -o ./$@
-
-.texinfo.dvi:
-	TEXINPUTS="$(srcdir);$$TEXINPUTS"    MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi.info:
-	$(MAKEINFO) $(srcdir)/$< -o ./$@
-
-.txi.dvi:
-	TEXINPUTS="$(srcdir);$$TEXINPUTS"    MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.dvi.ps:
-	$(DVIPS) $< -o $@
-
-install-info-am: $(INFO_DEPS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(infodir)
-	@for file in $(INFO_DEPS) make.i; do    d=$(srcdir);    for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9] $$file[0-9] $$file[0-9][0-9]`; do      if test -f $$d/$$ifile; then        echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; else : ; fi;    done;  done
-	@$(POST_INSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then    for file in $(INFO_DEPS); do      echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";     install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;   done;  else : ; fi
-
-uninstall-info:
-	$(PRE_UNINSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then    ii=yes;  else ii=; fi;  for file in $(INFO_DEPS); do    test -z $ii || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file;  done
-	$(NORMAL_UNINSTALL)
-	for file in $(INFO_DEPS) make.i; do    (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9] $$file[0-9] $$file[0-9][0-9]);  done
-
-dist-info: $(INFO_DEPS)
-	for base in $(INFO_DEPS); do    d=$(srcdir);    for file in `cd $$d && eval echo $$base*`; do      test -f $(distdir)/$$file      || ln $$d/$$file $(distdir)/$$file 2> /dev/null      || cp -p $$d/$$file $(distdir)/$$file;    done;  done
-
-mostlyclean-aminfo:
-	-rm -f make.aux make.cp make.cps make.dvi make.fn make.fns make.ky \
-	  make.kys make.ps make.log make.pg make.toc make.tp make.tps \
-	  make.vr make.vrs make.op make.tr make.cv make.cn
-
-clean-aminfo:
-
-distclean-aminfo:
-
-maintainer-clean-aminfo:
-	for i in $(INFO_DEPS) make.i; do rm -f `eval echo $$i*`; done
-
-install-man1:
-	$(mkinstalldirs) $(DESTDIR)$(man1dir)
-	@list='$(man1_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
-	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
-	done
-
-uninstall-man1:
-	@list='$(man1_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
-	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
-	done
-install-man: $(MANS)
-	@$(NORMAL_INSTALL)
-	$(MAKE) install-man1
-uninstall-man:
-	@$(NORMAL_UNINSTALL)
-	$(MAKE) uninstall-man1
-
-# Assume that the only thing to do in glob is to build libglob.a,
-# but do a sanity check: if $SUBDIRS will ever have more than
-# a single directory, yell bloody murder.
-all-recursive:
-ifeq ($(words $(SUBDIRS)), 1)
-	@command.com /c if not exist glob\\nul md glob
-	@echo Making all in $(SUBDIRS)
-	$(MAKE) -C $(SUBDIRS) -f ../Makefile INCLUDES='-I$(srcdir) -I$(srcdir)/glob' DEFS='-I.. -I$(srcdir)' VPATH=$(srcdir)/glob libglob.a
-else
-	@echo FATAL: There is more than one directory in "($(SUBDIRS))"
-	@$(EXIT_FAIL)
-endif
-
-$(SUBDIRS):
-	command.com /c md $@
-
-libglob.a: $(libglob_a_OBJECTS)
-	command.com /c if exist libglob.a del libglob.a
-	$(AR) cru libglob.a $(libglob_a_OBJECTS) $(libglob_a_LIBADD)
-	$(RANLIB) libglob.a
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive check-recursive:
-ifeq ($(words $(SUBDIRS)), 1)
-	@echo Making $(shell echo $@ | sed s/-recursive//) in $(SUBDIRS)
-	$(MAKE) -C $(SUBDIRS) -f ../Makefile $(shell echo $@ | sed s/-recursive//)-am
-else
-	@echo FATAL: There is more than one directory in "($(SUBDIRS))"
-	@$(EXIT_FAIL)
-endif
-
-tags-in-glob: $(libglob_a_SOURCES)
-	etags $(addprefix $(srcdir)/,$^) -o ./glob/TAGS
-
-tags-recursive:
-ifeq ($(words $(SUBDIRS)), 1)
-	$(MAKE) tags-in-glob
-else
-	@echo FATAL: There is more than one directory in "($(SUBDIRS))"
-	@$(EXIT_FAIL)
-endif
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES)
-	mkid $(srcdir)/$(SOURCES) $(srcdir)/$(libglob_a_SOURCES) ./config.h $(HEADERS)
-
-TAGS: tags-recursive $(HEADERS) $(srcdir)/$(SOURCES) config.h $(TAGS_DEPENDENCIES)
-	etags -i ./glob/TAGS $(ETAGS_ARGS) $(srcdir)/$(SOURCES) ./config.h $(HEADERS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	rm -rf $(distdir)
-	GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`;  cd $(distdir)/=build    && ../configure --srcdir=.. --prefix=$$dc_install_base    && $(MAKE)    && $(MAKE) dvi    && $(MAKE) check    && $(MAKE) install    && $(MAKE) installcheck    && $(MAKE) dist
-	rm -rf $(distdir)
-	@echo "========================";  echo "$(distdir).tar.gz is ready for distribution";  echo "========================"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	rm -rf $(distdir)
-distdir: $(DISTFILES)
-	rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do d=$(srcdir); test -f $(distdir)/$$file || ln $$d/$$file $(distdir)/$$file 2> /dev/null || cp -p $$d/$$file $(distdir)/$$file; done; for subdir in $(SUBDIRS); do test -d $(distdir)/$$subdir || mkdir $(distdir)/$$subdir || exit 1; chmod 777 $(distdir)/$$subdir; (cd $$subdir && $(MAKE) top_distdir=../$(top_distdir)/$$subdir distdir=../$(distdir)/$$subdir distdir) || exit 1; done
-	$(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
-	$(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
-
-info: $(INFO_DEPS) info-recursive
-dvi: $(DVIS) dvi-recursive
-check: all-am check-recursive check-local
-	@:
-installcheck: installcheck-recursive
-all-recursive-am: config.h
-	$(MAKE) all-recursive
-
-all-am: Makefile $(INFO_DEPS) $(PROGRAMS) config.h
-
-install-exec-am: install-binPROGRAMS
-
-install-data-am: install-info-am
-
-uninstall-am: uninstall-binPROGRAMS uninstall-info
-
-install-exec: install-exec-recursive install-exec-am
-	@$(NORMAL_INSTALL)
-
-install-data: install-data-recursive install-data-am
-	@$(NORMAL_INSTALL)
-
-install-recursive uninstall-recursive:
-	@:
-
-install: install-recursive install-exec-am install-data-am
-	@:
-
-uninstall: uninstall-recursive uninstall-am
-
-all: all-recursive-am all-am
-
-install-strip:
-	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
-installdirs: installdirs-recursive
-	$(mkinstalldirs)  $(bindir) $(infodir)
-
-
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(DISTCLEANFILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-mostlyclean-am:  mostlyclean-hdr mostlyclean-binPROGRAMS  mostlyclean-compile mostlyclean-aminfo mostlyclean-tags  mostlyclean-generic
-
-clean-am:  clean-hdr clean-binPROGRAMS clean-compile clean-aminfo  clean-tags clean-generic mostlyclean-am
-
-distclean-am:  distclean-hdr distclean-binPROGRAMS distclean-compile  distclean-aminfo distclean-tags distclean-generic  clean-am
-
-maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-binPROGRAMS  maintainer-clean-compile maintainer-clean-aminfo  maintainer-clean-tags maintainer-clean-generic  distclean-am
-
-mostlyclean:  mostlyclean-recursive mostlyclean-am
-
-clean: clean-noinstLIBRARIES clean-recursive clean-am
-
-distclean:  distclean-recursive distclean-am
-	rm -f config.status
-
-maintainer-clean:  maintainer-clean-recursive maintainer-clean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	rm -f config.status
-
-.PHONY: default mostlyclean-hdr distclean-hdr clean-hdr \
-maintainer-clean-hdr mostlyclean-binPROGRAMS distclean-binPROGRAMS \
-clean-binPROGRAMS maintainer-clean-binPROGRAMS uninstall-binPROGRAMS \
-install-binPROGRAMS mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile install-info-am uninstall-info \
-mostlyclean-aminfo distclean-aminfo clean-aminfo \
-maintainer-clean-aminfo install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive check-am \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir \
-mostlyclean-depend distclean-depend clean-depend \
-maintainer-clean-depend info dvi check-local installcheck \
-all-recursive-am all-am install-exec-am install-data-am uninstall-am \
-install-exec install-data install uninstall all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# --------------- Local DIST Section
-
-# Install the w32 subdirectory
-#
-dist-hook:
-	(cd $(srcdir); \
-	 w32=`find w32 -follow \( -name CVS -prune \) -o -type f -print`; \
-	 tar chf - $$w32) \
-	| (cd $(distdir); tar xfBp -)
-
-# --------------- Local CHECK Section
-
-# Note: check-loadavg is NOT a prerequisite of check-local, since
-# there's no uptime utility, and the test it does doesn't make sense
-# on MSDOS anyway.
-check-local: check-shell check-regression
-	@banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built with $(CC) "; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"; \
-	echo
-
-.PHONY: check-loadavg check-shell check-regression
-
-# > check-shell
-#
-# check-shell is designed to fail if they don't have a Unixy shell
-# installed.  The test suite requires such a shell.
-check-shell:
-	@echo If Make says Error -1, you do not have Unix-style shell installed
-	@foo=bar.exe :
-
-# > check-loadavg
-#
-loadavg: loadavg.c config.h
-	@rm -f loadavg
-	$(LINK) -DTEST $(make_LDFLAGS) loadavg.c $(LIBS)
-# We copy getloadavg.c into a different file rather than compiling it
-# directly because some compilers clobber getloadavg.o in the process.
-loadavg.c: getloadavg.c
-	ln $(srcdir)/getloadavg.c loadavg.c || \
-	cp $(srcdir)/getloadavg.c loadavg.c
-check-loadavg: loadavg
-	@echo The system uptime program believes the load average to be:
-	-uptime
-	@echo The GNU load average checking code believes:
-	-./loadavg
-
-# > check-regression
-#
-# Look for the make test suite, and run it if found.  Look in MAKE_TEST if
-# specified, or else in the srcdir or the distdir, their parents, and _their_
-# parents.
-#
-check-regression:
-	@if test -f "$(srcdir)/tests/run_make_tests"; then \
-	  if $(PERL) -v >/dev/null 2>&1; then \
-	    case `cd $(srcdir); pwd` in `pwd`) : ;; \
-	      *) test -d tests || mkdir tests; \
-		 for f in run_make_tests run_make_tests.pl test_driver.pl scripts; do \
-		   rm -rf tests/$$f; cp -pr $(srcdir)/tests/$$f tests; \
-		 done ;; \
-	    esac; \
-	    echo "cd tests && $(PERL) ./run_make_tests.pl -make ../make.exe $(MAKETESTFLAGS)"; \
-	    cd tests && $(PERL) ./run_make_tests.pl -make ../make.exe $(MAKETESTFLAGS); \
-	  else \
-	    echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \
-	  fi; \
-	 else \
-	  echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \
-	 fi
-
-# --------------- Maintainer's Section
-
-# Note this requires GNU make.  Not to worry, since it will only be included
-# in the Makefile if we're in the maintainer's environment.
-#include $(srcdir)/maintMakefile
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
-
-# --------------- DEPENDENCIES
-#
-alloca.o: alloca.c config.h
-ar.o: ar.c make.h config.h gettext.h filedef.h dep.h glob/fnmatch.h
-arscan.o: arscan.c make.h config.h gettext.h
-commands.o: commands.c make.h config.h gettext.h dep.h filedef.h \
-	variable.h job.h commands.h
-default.o: default.c make.h config.h gettext.h rule.h dep.h filedef.h \
-	job.h commands.h variable.h
-dir.o: dir.c make.h config.h gettext.h glob/glob.h
-expand.o: expand.c make.h config.h gettext.h filedef.h job.h commands.h \
-	variable.h rule.h
-file.o: file.c make.h config.h gettext.h dep.h filedef.h job.h \
-	commands.h variable.h
-function.o: function.c make.h config.h gettext.h filedef.h variable.h \
-	dep.h job.h commands.h debug.h
-getloadavg.o: getloadavg.c config.h
-getopt.o: getopt.c config.h gettext.h getopt.h
-getopt1.o: getopt1.c config.h getopt.h
-gettext.o: gettext.c config.h gettext.h
-implicit.o: implicit.c make.h config.h gettext.h rule.h dep.h filedef.h \
-	debug.h
-job.o: job.c make.h config.h gettext.h job.h debug.h filedef.h \
-	commands.h variable.h
-main.o: main.c make.h config.h gettext.h dep.h filedef.h variable.h \
-	job.h commands.h rule.h debug.h getopt.h
-misc.o: misc.c make.h config.h gettext.h dep.h debug.h
-read.o: read.c make.h config.h gettext.h glob/glob.h dep.h filedef.h \
-	job.h commands.h variable.h rule.h debug.h
-remake.o: remake.c make.h config.h gettext.h filedef.h job.h commands.h \
-	dep.h variable.h debug.h
-remote-stub.o: remote-stub.c make.h config.h gettext.h filedef.h job.h \
-	commands.h
-rule.o: rule.c make.h config.h gettext.h dep.h filedef.h job.h \
-	commands.h variable.h rule.h
-signame.o: signame.c make.h config.h gettext.h signame.h
-variable.o: variable.c make.h config.h gettext.h dep.h filedef.h job.h \
-	commands.h variable.h rule.h
-version.o: version.c config.h
-vpath.o: vpath.c make.h config.h gettext.h filedef.h variable.h
-

buildtools/windows/source/make-3.79.1/Makefile.am

@@ -1,170 +0,0 @@
-# This is a -*-Makefile-*-, or close enough
-
-AUTOMAKE_OPTIONS = 1.4
-
-SUBDIRS =	$(GLOBDIR) i18n
-
-bin_PROGRAMS =	make
-
-# These source files also have gettext references
-SRCS	     =  ar.c arscan.c commands.c dir.c expand.c file.c function.c \
-		getopt.c implicit.c job.c main.c misc.c read.c remake.c \
-		rule.c signame.c variable.c vpath.c
-
-make_SOURCES =	$(SRCS) default.c remote-$(REMOTE).c version.c \
-		getopt1.c
-
-noinst_HEADERS = commands.h dep.h filedef.h job.h make.h rule.h variable.h \
-		debug.h signame.h getopt.h gettext.h
-
-make_LDADD =	$(LIBOBJS) @ALLOCA@ $(GLOBLIB)
-
-man_MANS =	make.1
-info_TEXINFOS =	make.texinfo
-
-DEFS =		-DALIASPATH=\"$(aliaspath)\" -DLOCALEDIR=\"$(localedir)\" -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\" @DEFS@
-
-INCLUDES =	-I. -I$(srcdir) $(GLOBINC)
-
-EXTRA_DIST = 	README build.sh.in $(man_MANS) README.customs remote-cstms.c\
-		make-stds.texi SCOPTIONS SMakefile\
-		README.Amiga Makefile.ami config.ami make.lnk amiga.c amiga.h\
-		README.DOS Makefile.DOS configure.bat dosbuild.bat configh.dos\
-		README.W32 NMakefile config.h.W32 build_w32.bat subproc.bat\
-		readme.vms makefile.vms makefile.com config.h-vms vmsdir.h\
-		vmsfunctions.c vmsify.c\
-		gettext.c\
-		glob/COPYING.LIB glob/ChangeLog glob/Makefile.am\
-		glob/Makefile.ami glob/Makefile.in glob/SCOPTIONS\
-		glob/SMakefile glob/configure.bat glob/fnmatch.c\
-		glob/fnmatch.h glob/glob.c glob/glob.h
-
-MOSTLYCLEANFILES = loadavg.c
-CLEANFILES =	loadavg
-
-MAKE_HOST =	@MAKE_HOST@
-
-
-# --------------- Internationalization Section
-
-POTFILES     =	$(SRCS) remote-cstms.c vmsfunctions.c
-
-localedir    =	$(prefix)/share/locale
-aliaspath    =	$(localedir):.
-
-all-local: $(srcdir)/stamp-pot
-
-$(srcdir)/stamp-pot: $(POTFILES)
-	@echo "$(POTFILES)" > $@
-
-
-# --------------- Local INSTALL Section
-
-# If necessary, change the gid of the app and turn on the setgid flag.
-#
-
-# Whether or not make needs to be installed setgid.
-# The value should be either `true' or `false'.
-# On many systems, the getloadavg function (used to implement the `-l'
-# switch) will not work unless make is installed setgid kmem.
-#
-inst_setgid = @NEED_SETGID@
-
-# Install make setgid to this group so it can get the load average.
-#
-inst_group = @KMEM_GROUP@
-
-install-exec-local:
-	@if $(inst_setgid); then \
-	   app=$(DESTDIR)$(bindir)/`echo $(bin_PROGRAMS)|sed '$(transform)'`; \
-	   if chgrp $(inst_group) $$app && chmod g+s $$app; then \
-	     echo "chgrp $(inst_group) $$app && chmod g+s $$app"; \
-	   else \
-	     echo "$$app needs to be owned by group $(inst_group) and setgid;"; \
-	     echo "otherwise the \`-l' option will probably not work."; \
-	     echo "You may need special privileges to complete the installation"; \
-	     echo "of $$app."; \
-	   fi; \
-	 else true; fi
-
-# --------------- Local DIST Section
-
-# Install the w32 and tests subdirectories
-#
-dist-hook:
-	(cd $(srcdir); \
-	 sub=`find w32 tests -follow \( -name CVS -prune -o -name work -prune \) -o \( -name \*.orig -o -name \*.rej -o -name \*~ -prune \) -o -type f -print`; \
-	 tar chf - $$sub) \
-	| (cd $(distdir); tar xfBp -)
-
-
-# --------------- Local CHECK Section
-
-check-local: check-regression check-loadavg
-	@banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built with $(CC) "; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"; \
-	echo
-
-.PHONY: check-loadavg check-regression
-
-# > check-loadavg
-#
-loadavg: loadavg.c config.h
-	@rm -f loadavg
-	$(LINK) -DTEST $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(make_LDFLAGS) loadavg.c $(LIBS)
-
-# We copy getloadavg.c into a different file rather than compiling it
-# directly because some compilers clobber getloadavg.o in the process.
-#
-loadavg.c: getloadavg.c
-	ln $(srcdir)/getloadavg.c loadavg.c || \
-	  cp $(srcdir)/getloadavg.c loadavg.c
-
-check-loadavg: loadavg
-	@echo The system uptime program believes the load average to be:
-	-uptime
-	@echo The GNU load average checking code believes:
-	-./loadavg
-
-# > check-regression
-#
-# Look for the make test suite, and run it if found and we can find perl.
-# If we're building outside the tree, we use symlinks to make a local copy of
-# the test suite.  Unfortunately the test suite itself isn't localizable yet.
-#
-MAKETESTFLAGS =
-
-check-regression:
-	@if test -f "$(srcdir)/tests/run_make_tests"; then \
-	  if $(PERL) -v >/dev/null 2>&1; then \
-	    case `cd $(srcdir); pwd` in `pwd`) : ;; \
-	      *) test -d tests || mkdir tests; \
-		 rm -f srctests; \
-		 if ln -s "$(srcdir)/tests" srctests; then \
-		   for f in run_make_tests run_make_tests.pl test_driver.pl scripts; do \
-		     rm -f tests/$$f; ln -s ../srctests/$$f tests; \
-		   done; fi ;; \
-	    esac; \
-	    echo "cd tests && $(PERL) ./run_make_tests.pl -make ../make $(MAKETESTFLAGS)"; \
-	    cd tests && $(PERL) ./run_make_tests.pl -make ../make $(MAKETESTFLAGS); \
-	  else \
-	    echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \
-	  fi; \
-	 else \
-	  echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \
-	 fi
-
-
-# --------------- Local CLEAN section
-
-maintainer-clean-local:
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-
-
-# --------------- Maintainer's Section
-
-@MAINT_MAKEFILE@

buildtools/windows/source/make-3.79.1/Makefile.ami

@@ -1,305 +0,0 @@
-# NOTE: If you have no `make' program at all to process this makefile, run
-# `build.sh' instead.
-#
-# Copyright (C) 1988, 89, 91, 92, 93, 94, 1995 Free Software Foundation, Inc.
-# This file is part of GNU Make.
-#
-# GNU Make is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# GNU Make is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Make; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-#
-#	Makefile for GNU Make
-#
-
-CC = sc
-RM = delete
-
-CFLAGS =
-CPPFLAGS =
-LDFLAGS =
-
-# Define these for your system as follows:
-#	-DNO_ARCHIVES		To disable `ar' archive support.
-#	-DNO_FLOAT		To avoid using floating-point numbers.
-#	-DENUM_BITFIELDS	If the compiler isn't GCC but groks enum foo:2.
-#				Some compilers apparently accept this
-#				without complaint but produce losing code,
-#				so beware.
-# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
-# See also `config.h'.
-defines =
-
-# Which flavor of remote job execution support to use.
-# The code is found in `remote-$(REMOTE).c'.
-REMOTE = stub
-
-# If you are using the GNU C library, or have the GNU getopt functions in
-# your C library, you can comment these out.
-GETOPT = getopt.o getopt1.o
-GETOPT_SRC = $(srcdir)getopt.c $(srcdir)getopt1.c $(srcdir)getopt.h
-
-# If you are using the GNU C library, or have the GNU glob functions in
-# your C library, you can comment this out.  GNU make uses special hooks
-# into the glob functions to be more efficient (by using make's directory
-# cache for globbing), so you must use the GNU functions even if your
-# system's C library has the 1003.2 glob functions already.  Also, the glob
-# functions in the AIX and HPUX C libraries are said to be buggy.
-GLOB = glob/glob.lib
-
-# If your system doesn't have alloca, or the one provided is bad, define this.
-ALLOCA = alloca.o
-ALLOCA_SRC = $(srcdir)alloca.c
-
-# If your system needs extra libraries loaded in, define them here.
-# System V probably need -lPW for alloca.  HP-UX 7.0's alloca in
-# libPW.a is broken on HP9000s300 and HP9000s400 machines.  Use
-# alloca.c instead on those machines.
-LOADLIBES =
-
-# Any extra object files your system needs.
-extras = amiga.o
-
-# Common prefix for machine-independent installed files.
-prefix =
-# Common prefix for machine-dependent installed files.
-exec_prefix =
-
-# Directory to install `make' in.
-bindir = sc:c
-# Directory to find libraries in for `-lXXX'.
-libdir = lib:
-# Directory to search by default for included makefiles.
-includedir = include:
-# Directory to install the Info files in.
-infodir = doc:
-# Directory to install the man page in.
-mandir = t:
-# Number to put on the man page filename.
-manext = 1
-# Prefix to put on installed `make' binary file name.
-binprefix =
-# Prefix to put on installed `make' man page file name.
-manprefix = $(binprefix)
-
-# Whether or not make needs to be installed setgid.
-# The value should be either `true' or `false'.
-# On many systems, the getloadavg function (used to implement the `-l'
-# switch) will not work unless make is installed setgid kmem.
-install_setgid = false
-# Install make setgid to this group so it can read /dev/kmem.
-group = sys
-
-# Program to install `make'.
-INSTALL_PROGRAM = copy
-# Program to install the man page.
-INSTALL_DATA = copy
-# Generic install program.
-INSTALL = copy
-
-# Program to format Texinfo source into Info files.
-MAKEINFO = makeinfo
-# Program to format Texinfo source into DVI files.
-TEXI2DVI = texi2dvi
-
-# Programs to make tags files.
-ETAGS = etags -w
-CTAGS = ctags -w
-
-objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o	\
-       rule.o implicit.o default.o variable.o expand.o function.o	\
-       vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o     \
-       $(GETOPT) $(ALLOCA) $(extras)
-srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c             \
-       $(srcdir)file.c $(srcdir)getloadavg.c $(srcdir)misc.c         \
-       $(srcdir)main.c $(srcdir)read.c $(srcdir)remake.c             \
-       $(srcdir)rule.c $(srcdir)implicit.c $(srcdir)default.c        \
-       $(srcdir)variable.c $(srcdir)expand.c $(srcdir)function.c     \
-       $(srcdir)vpath.c $(srcdir)version.c                            \
-       $(srcdir)remote-$(REMOTE).c                                     \
-       $(srcdir)ar.c $(srcdir)arscan.c                                \
-       $(srcdir)signame.c $(srcdir)signame.h $(GETOPT_SRC)            \
-       $(srcdir)commands.h $(srcdir)dep.h $(srcdir)filedep.h            \
-       $(srcdir)job.h $(srcdir)make.h $(srcdir)rule.h                \
-       $(srcdir)variable.h $(ALLOCA_SRC) $(srcdir)config.h.in
-
-
-.SUFFIXES:
-.SUFFIXES: .o .c .h .ps .dvi .info .texinfo
-
-all: make
-info: make.info
-dvi: make.dvi
-# Some makes apparently use .PHONY as the default goal if it is before `all'.
-.PHONY: all check info dvi
-
-make.info: make.texinfo
-	$(MAKEINFO) -I$(srcdir) $(srcdir)make.texinfo -o make.info
-
-make.dvi: make.texinfo
-	$(TEXI2DVI) $(srcdir)make.texinfo
-
-make.ps: make.dvi
-	dvi2ps make.dvi > make.ps
-
-make: $(objs) $(GLOB)
-	$(CC) Link $(LDFLAGS) $(objs) Lib $(GLOB) $(LOADLIBES) To make.new
-	-delete make
-	rename make.new make
-
-TMPFILE = t:Make$$
-
-$(GLOB):
-	cd glob @@\
-	$(MAKE) -$(MAKEFLAGS) -f Makefile
-
-# -I. is needed to find config.h in the build directory.
-OUTPUT_OPTION =
-.c.o:
-	$(CC) $(defines) IDir "" IDir glob \
-	      $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
-
-# For some losing Unix makes.
-SHELL = /bin/sh
-#@SET_MAKE@
-
-glob/libglob.a: FORCE config.h
-	cd glob; $(MAKE) libglob.a
-FORCE:
-
-tagsrcs = $(srcs) $(srcdir)remote-*.c
-
-.PHONY: install installdirs
-install: installdirs \
-	 $(bindir)$(binprefix)make $(infodir)make.info \
-	 $(mandir)$(manprefix)make.$(manext)
-
-installdirs:
-	$(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir)
-
-$(bindir)$(binprefix)make: make
-	$(INSTALL_PROGRAM) make $@.new
-	@if $(install_setgid); then \
-	   if chgrp $(group) $@.new && chmod g+s $@.new; then \
-	     echo "chgrp $(group) $@.new && chmod g+s $@.new"; \
-	   else \
-	     echo "$@ needs to be owned by group $(group) and setgid;"; \
-	     echo "otherwise the \`-l' option will probably not work."; \
-	     echo "You may need special privileges to install $@."; \
-	   fi; \
-	 else true; fi
-# Some systems can't deal with renaming onto a running binary.
-	-$(RM) $@.old
-	-mv $@ $@.old
-	mv $@.new $@
-
-$(infodir)make.info: make.info
-	if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
-	for file in $${dir}/make.info*; do \
-	  name="`basename $$file`"; \
-	  $(INSTALL_DATA) $$file \
-	    `echo $@ | sed "s,make.info\$$,$$name,"`; \
-	done
-# Run install-info only if it exists.
-# Use `if' instead of just prepending `-' to the
-# line so we notice real errors from install-info.
-# We use `$(SHELL) -c' because some shells do not
-# fail gracefully when there is an unknown command.
-	if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
-	  if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
-	  install-info --infodir=$(infodir) $$dir/make.info; \
-	else true; fi
-
-$(mandir)$(manprefix)make.$(manext): make.man
-	$(INSTALL_DATA) $(srcdir)make.man $@
-
-
-loadavg: loadavg.c config.h
-	$(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
-	      loadavg.c $(LOADLIBES) -o $@
-# We copy getloadavg.c into a different file rather than compiling it
-# directly because some compilers clobber getloadavg.o in the process.
-loadavg.c: getloadavg.c
-	ln $(srcdir)getloadavg.c loadavg.c || \
-	cp $(srcdir)getloadavg.c loadavg.c
-check-loadavg: loadavg
-	@echo The system uptime program believes the load average to be:
-	-uptime
-	@echo The GNU load average checking code believes:
-	./loadavg
-check: check-loadavg
-
-
-.PHONY: clean realclean distclean mostlyclean
-clean: glob-clean
-	-$(RM) make loadavg "#?.o" core make.dvi
-
-distclean: clean glob-realclean
-	-$(RM) Makefile config.h config.status build.sh
-	-$(RM) config.log config.cache
-	-$(RM) TAGS tags
-	-$(RM) make.?? make.??s make.log make.toc make.*aux
-	-$(RM) loadavg.c
-
-realclean: distclean
-	-$(RM) make.info*
-mostlyclean: clean
-
-.PHONY: glob-clean glob-realclean
-glob-clean glob-realclean:
-	cd glob @@\
-	$(MAKE) $@
-
-# This tells versions [3.59,3.63) of GNU make not to export all variables.
-.NOEXPORT:
-
-# The automatically generated dependencies below may omit config.h
-# because it is included with ``#include <config.h>'' rather than
-# ``#include "config.h"''.  So we add the explicit dependency to make sure.
-$(objs): config.h
-
-# Automatically generated dependencies will be put at the end of the file.
-
-# Automatically generated dependencies.
-commands.o: commands.c make.h dep.h filedef.h variable.h job.h \
- commands.h
-job.o: job.c make.h job.h filedef.h commands.h variable.h
-dir.o: dir.c make.h
-file.o: file.c make.h dep.h filedef.h job.h commands.h variable.h
-misc.o: misc.c make.h dep.h
-main.o: main.c make.h dep.h filedef.h variable.h job.h commands.h \
- getopt.h
-read.o: read.c make.h dep.h filedef.h job.h commands.h variable.h \
- glob/glob.h
-remake.o: remake.c make.h filedef.h job.h commands.h dep.h
-rule.o: rule.c make.h dep.h filedef.h job.h commands.h variable.h \
- rule.h
-implicit.o: implicit.c make.h rule.h dep.h filedef.h
-default.o: default.c make.h rule.h dep.h filedef.h job.h commands.h \
- variable.h
-variable.o: variable.c make.h dep.h filedef.h job.h commands.h \
- variable.h
-expand.o: expand.c make.h filedef.h job.h commands.h variable.h
-function.o: function.c make.h filedef.h variable.h dep.h job.h \
- commands.h amiga.h
-vpath.o: vpath.c make.h filedef.h variable.h
-version.o: version.c
-ar.o: ar.c make.h filedef.h dep.h
-arscan.o: arscan.c make.h
-signame.o: signame.c signame.h
-remote-stub.o: remote-stub.c make.h filedef.h job.h commands.h
-getopt.o: getopt.c
-getopt1.o : getopt1.c getopt.h
-getloadavg.o: getloadavg.c
-amiga.o: amiga.c make.h variable.h amiga.h

buildtools/windows/source/make-3.79.1/Makefile.in

@@ -1,815 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# This is a -*-Makefile-*-, or close enough
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_alias = @host_alias@
-host_triplet = @host@
-ALL_LINGUAS = @ALL_LINGUAS@
-ALL_MOFILES = @ALL_MOFILES@
-ALL_POFILES = @ALL_POFILES@
-AR = @AR@
-CC = @CC@
-CPP = @CPP@
-GETCONF = @GETCONF@
-GLOBDIR = @GLOBDIR@
-GLOBINC = @GLOBINC@
-GLOBLIB = @GLOBLIB@
-LIBOBJS = @LIBOBJS@
-MAKEINFO = @MAKEINFO@
-MOFILES = @MOFILES@
-PACKAGE = @PACKAGE@
-PERL = @PERL@
-RANLIB = @RANLIB@
-REMOTE = @REMOTE@
-VERSION = @VERSION@
-
-AUTOMAKE_OPTIONS = 1.4
-
-SUBDIRS = $(GLOBDIR) i18n
-
-bin_PROGRAMS = make
-
-# These source files also have gettext references
-SRCS = ar.c arscan.c commands.c dir.c expand.c file.c function.c 		getopt.c implicit.c job.c main.c misc.c read.c remake.c 		rule.c signame.c variable.c vpath.c
-
-
-make_SOURCES = $(SRCS) default.c remote-$(REMOTE).c version.c 		getopt1.c
-
-
-noinst_HEADERS = commands.h dep.h filedef.h job.h make.h rule.h variable.h 		debug.h signame.h getopt.h gettext.h
-
-
-make_LDADD = $(LIBOBJS) @ALLOCA@ $(GLOBLIB)
-
-man_MANS = make.1
-info_TEXINFOS = make.texinfo
-
-DEFS = -DALIASPATH=\"$(aliaspath)\" -DLOCALEDIR=\"$(localedir)\" -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\" @DEFS@
-
-INCLUDES = -I. -I$(srcdir) $(GLOBINC)
-
-EXTRA_DIST = README build.sh.in $(man_MANS) README.customs remote-cstms.c 		make-stds.texi SCOPTIONS SMakefile 		README.Amiga Makefile.ami config.ami make.lnk amiga.c amiga.h 		README.DOS Makefile.DOS configure.bat dosbuild.bat configh.dos 		README.W32 NMakefile config.h.W32 build_w32.bat subproc.bat 		readme.vms makefile.vms makefile.com config.h-vms vmsdir.h 		vmsfunctions.c vmsify.c 		gettext.c 		glob/COPYING.LIB glob/ChangeLog glob/Makefile.am 		glob/Makefile.ami glob/Makefile.in glob/SCOPTIONS 		glob/SMakefile glob/configure.bat glob/fnmatch.c 		glob/fnmatch.h glob/glob.c glob/glob.h
-
-
-MOSTLYCLEANFILES = loadavg.c
-CLEANFILES = loadavg
-
-MAKE_HOST = @MAKE_HOST@
-
-# --------------- Internationalization Section
-
-POTFILES = $(SRCS) remote-cstms.c vmsfunctions.c
-
-localedir = $(prefix)/share/locale
-aliaspath = $(localedir):.
-
-# --------------- Local INSTALL Section
-
-# If necessary, change the gid of the app and turn on the setgid flag.
-#
-
-# Whether or not make needs to be installed setgid.
-# The value should be either `true' or `false'.
-# On many systems, the getloadavg function (used to implement the `-l'
-# switch) will not work unless make is installed setgid kmem.
-#
-inst_setgid = @NEED_SETGID@
-
-# Install make setgid to this group so it can get the load average.
-#
-inst_group = @KMEM_GROUP@
-
-# > check-regression
-#
-# Look for the make test suite, and run it if found and we can find perl.
-# If we're building outside the tree, we use symlinks to make a local copy of
-# the test suite.  Unfortunately the test suite itself isn't localizable yet.
-#
-MAKETESTFLAGS = 
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =  build.sh
-PROGRAMS =  $(bin_PROGRAMS)
-
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-make_OBJECTS =  ar.o arscan.o commands.o dir.o expand.o file.o \
-function.o getopt.o implicit.o job.o main.o misc.o read.o remake.o \
-rule.o signame.o variable.o vpath.o default.o remote-$(REMOTE).o \
-version.o getopt1.o
-make_DEPENDENCIES =  @LIBOBJS@ @ALLOCA@
-make_LDFLAGS = 
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-TEXI2DVI = texi2dvi
-INFO_DEPS = make.info
-DVIS = make.dvi
-TEXINFOS = make.texinfo
-man1dir = $(mandir)/man1
-MANS = $(man_MANS)
-
-NROFF = nroff
-HEADERS =  $(noinst_HEADERS)
-
-DIST_COMMON =  README ./stamp-h.in ABOUT-NLS AUTHORS COPYING ChangeLog \
-INSTALL Makefile.am Makefile.in NEWS acconfig.h acinclude.m4 aclocal.m4 \
-alloca.c build.sh.in config.guess config.h.in config.sub configure \
-configure.in getloadavg.c gettext.c install-sh missing mkinstalldirs \
-texinfo.tex
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-SOURCES = $(make_SOURCES)
-OBJECTS = $(make_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .dvi .info .o .ps .s .texi .texinfo .txi
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4):  configure.in  acinclude.m4
-	cd $(srcdir) && $(ACLOCAL)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-config.h: stamp-h
-	@if test ! -f $@; then \
-		rm -f stamp-h; \
-		$(MAKE) stamp-h; \
-	else :; fi
-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
-	     $(SHELL) ./config.status
-	@echo timestamp > stamp-h 2> /dev/null
-$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
-	@if test ! -f $@; then \
-		rm -f $(srcdir)/stamp-h.in; \
-		$(MAKE) $(srcdir)/stamp-h.in; \
-	else :; fi
-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
-	cd $(top_srcdir) && $(AUTOHEADER)
-	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
-
-mostlyclean-hdr:
-
-clean-hdr:
-
-distclean-hdr:
-	-rm -f config.h
-
-maintainer-clean-hdr:
-build.sh: $(top_builddir)/config.status build.sh.in
-	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-mostlyclean-binPROGRAMS:
-
-clean-binPROGRAMS:
-	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-
-distclean-binPROGRAMS:
-
-maintainer-clean-binPROGRAMS:
-
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(bindir)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo "  $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
-	     $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
-	  else :; fi; \
-	done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
-	done
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-make: $(make_OBJECTS) $(make_DEPENDENCIES)
-	@rm -f make
-	$(LINK) $(make_LDFLAGS) $(make_OBJECTS) $(make_LDADD) $(LIBS)
-
-make.info: make.texinfo
-make.dvi: make.texinfo
-
-
-DVIPS = dvips
-
-.texi.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texi.dvi:
-	TEXINPUTS=.:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.texi:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo.dvi:
-	TEXINPUTS=.:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.txi.dvi:
-	TEXINPUTS=.:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-.dvi.ps:
-	$(DVIPS) $< -o $@
-
-install-info-am: $(INFO_DEPS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(infodir)
-	@list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  d=$(srcdir); \
-	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
-	    if test -f $$d/$$ifile; then \
-	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
-	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
-	    else : ; fi; \
-	  done; \
-	done
-	@$(POST_INSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  list='$(INFO_DEPS)'; \
-	  for file in $$list; do \
-	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
-	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
-	  done; \
-	else : ; fi
-
-uninstall-info:
-	$(PRE_UNINSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  ii=yes; \
-	else ii=; fi; \
-	list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  test -z "$ii" \
-	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
-	done
-	@$(NORMAL_UNINSTALL)
-	list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
-	done
-
-dist-info: $(INFO_DEPS)
-	list='$(INFO_DEPS)'; \
-	for base in $$list; do \
-	  d=$(srcdir); \
-	  for file in `cd $$d && eval echo $$base*`; do \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file; \
-	  done; \
-	done
-
-mostlyclean-aminfo:
-	-rm -f make.aux make.cp make.cps make.dvi make.fn make.fns make.ky \
-	  make.kys make.ps make.log make.pg make.toc make.tp make.tps \
-	  make.vr make.vrs make.op make.tr make.cv make.cn
-
-clean-aminfo:
-
-distclean-aminfo:
-
-maintainer-clean-aminfo:
-	cd $(srcdir) && for i in $(INFO_DEPS); do \
-	  rm -f $$i; \
-	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
-	    rm -f $$i-[0-9]*; \
-	  fi; \
-	done
-
-install-man1:
-	$(mkinstalldirs) $(DESTDIR)$(man1dir)
-	@list='$(man1_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
-	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
-	done
-
-uninstall-man1:
-	@list='$(man1_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
-	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
-	done
-install-man: $(MANS)
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-man1
-uninstall-man:
-	@$(NORMAL_UNINSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) uninstall-man1
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive  \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" = "." && dot_seen=yes; \
-	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	$(mkinstalldirs) $(distdir)/glob
-	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
-	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
-alloca.o: alloca.c config.h
-ar.o: ar.c make.h config.h gettext.h filedef.h dep.h glob/fnmatch.h
-arscan.o: arscan.c make.h config.h gettext.h
-commands.o: commands.c make.h config.h gettext.h dep.h filedef.h \
-	variable.h job.h commands.h
-default.o: default.c make.h config.h gettext.h rule.h dep.h filedef.h \
-	job.h commands.h variable.h
-dir.o: dir.c make.h config.h gettext.h glob/glob.h
-expand.o: expand.c make.h config.h gettext.h filedef.h job.h commands.h \
-	variable.h rule.h
-file.o: file.c make.h config.h gettext.h dep.h filedef.h job.h \
-	commands.h variable.h
-function.o: function.c make.h config.h gettext.h filedef.h variable.h \
-	dep.h job.h commands.h debug.h
-getloadavg.o: getloadavg.c config.h
-getopt.o: getopt.c config.h gettext.h getopt.h
-getopt1.o: getopt1.c config.h getopt.h
-gettext.o: gettext.c config.h gettext.h
-implicit.o: implicit.c make.h config.h gettext.h rule.h dep.h filedef.h \
-	debug.h
-job.o: job.c make.h config.h gettext.h job.h debug.h filedef.h \
-	commands.h variable.h
-main.o: main.c make.h config.h gettext.h dep.h filedef.h variable.h \
-	job.h commands.h rule.h debug.h getopt.h
-misc.o: misc.c make.h config.h gettext.h dep.h debug.h
-read.o: read.c make.h config.h gettext.h glob/glob.h dep.h filedef.h \
-	job.h commands.h variable.h rule.h debug.h
-remake.o: remake.c make.h config.h gettext.h filedef.h job.h commands.h \
-	dep.h variable.h debug.h
-remote-stub.o: remote-stub.c make.h config.h gettext.h filedef.h job.h \
-	commands.h
-rule.o: rule.c make.h config.h gettext.h dep.h filedef.h job.h \
-	commands.h variable.h rule.h
-signame.o: signame.c make.h config.h gettext.h signame.h
-variable.o: variable.c make.h config.h gettext.h dep.h filedef.h job.h \
-	commands.h variable.h rule.h
-version.o: version.c config.h
-vpath.o: vpath.c make.h config.h gettext.h filedef.h variable.h
-
-info-am: $(INFO_DEPS)
-info: info-recursive
-dvi-am: $(DVIS)
-dvi: dvi-recursive
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-local
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-all-recursive-am: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-install-exec-am: install-binPROGRAMS install-exec-local
-install-exec: install-exec-recursive
-
-install-data-am: install-info-am install-man
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am: uninstall-binPROGRAMS uninstall-info uninstall-man
-uninstall: uninstall-recursive
-all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(MANS) $(HEADERS) config.h \
-		all-local
-all-redirect: all-recursive-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-	$(mkinstalldirs)  $(DESTDIR)$(bindir) $(DESTDIR)$(infodir) \
-		$(DESTDIR)$(mandir)/man1
-
-
-mostlyclean-generic:
-	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-hdr mostlyclean-binPROGRAMS \
-		mostlyclean-compile mostlyclean-aminfo mostlyclean-tags \
-		mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am:  clean-hdr clean-binPROGRAMS clean-compile clean-aminfo \
-		clean-tags clean-generic mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am:  distclean-hdr distclean-binPROGRAMS distclean-compile \
-		distclean-aminfo distclean-tags distclean-generic \
-		clean-am
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-binPROGRAMS \
-		maintainer-clean-compile maintainer-clean-aminfo \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am maintainer-clean-local
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
-maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile install-info-am uninstall-info \
-mostlyclean-aminfo distclean-aminfo clean-aminfo \
-maintainer-clean-aminfo install-man1 uninstall-man1 install-man \
-uninstall-man install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check-local check check-am installcheck-am installcheck \
-all-recursive-am install-exec-local install-exec-am install-exec \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-local all-redirect all-am all installdirs-am installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-all-local: $(srcdir)/stamp-pot
-
-$(srcdir)/stamp-pot: $(POTFILES)
-	@echo "$(POTFILES)" > $@
-
-install-exec-local:
-	@if $(inst_setgid); then \
-	   app=$(DESTDIR)$(bindir)/`echo $(bin_PROGRAMS)|sed '$(transform)'`; \
-	   if chgrp $(inst_group) $$app && chmod g+s $$app; then \
-	     echo "chgrp $(inst_group) $$app && chmod g+s $$app"; \
-	   else \
-	     echo "$$app needs to be owned by group $(inst_group) and setgid;"; \
-	     echo "otherwise the \`-l' option will probably not work."; \
-	     echo "You may need special privileges to complete the installation"; \
-	     echo "of $$app."; \
-	   fi; \
-	 else true; fi
-
-# --------------- Local DIST Section
-
-# Install the w32 and tests subdirectories
-#
-dist-hook:
-	(cd $(srcdir); \
-	 sub=`find w32 tests -follow \( -name CVS -prune -o -name work -prune \) -o \( -name \*.orig -o -name \*.rej -o -name \*~ -prune \) -o -type f -print`; \
-	 tar chf - $$sub) \
-	| (cd $(distdir); tar xfBp -)
-
-# --------------- Local CHECK Section
-
-check-local: check-regression check-loadavg
-	@banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built with $(CC) "; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"; \
-	echo
-
-.PHONY: check-loadavg check-regression
-
-# > check-loadavg
-#
-loadavg: loadavg.c config.h
-	@rm -f loadavg
-	$(LINK) -DTEST $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(make_LDFLAGS) loadavg.c $(LIBS)
-
-# We copy getloadavg.c into a different file rather than compiling it
-# directly because some compilers clobber getloadavg.o in the process.
-#
-loadavg.c: getloadavg.c
-	ln $(srcdir)/getloadavg.c loadavg.c || \
-	  cp $(srcdir)/getloadavg.c loadavg.c
-
-check-loadavg: loadavg
-	@echo The system uptime program believes the load average to be:
-	-uptime
-	@echo The GNU load average checking code believes:
-	-./loadavg
-
-check-regression:
-	@if test -f "$(srcdir)/tests/run_make_tests"; then \
-	  if $(PERL) -v >/dev/null 2>&1; then \
-	    case `cd $(srcdir); pwd` in `pwd`) : ;; \
-	      *) test -d tests || mkdir tests; \
-		 rm -f srctests; \
-		 if ln -s "$(srcdir)/tests" srctests; then \
-		   for f in run_make_tests run_make_tests.pl test_driver.pl scripts; do \
-		     rm -f tests/$$f; ln -s ../srctests/$$f tests; \
-		   done; fi ;; \
-	    esac; \
-	    echo "cd tests && $(PERL) ./run_make_tests.pl -make ../make $(MAKETESTFLAGS)"; \
-	    cd tests && $(PERL) ./run_make_tests.pl -make ../make $(MAKETESTFLAGS); \
-	  else \
-	    echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \
-	  fi; \
-	 else \
-	  echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \
-	 fi
-
-# --------------- Local CLEAN section
-
-maintainer-clean-local:
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-
-# --------------- Maintainer's Section
-
-@MAINT_MAKEFILE@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

buildtools/windows/source/make-3.79.1/NEWS

@@ -1,785 +0,0 @@
-GNU make NEWS                                               -*-indented-text-*-
-  History of user-visible changes.
-  23 Jun 2000
-
-Copyright (C) 1992,93,94,95,96,97,98,99,2000 Free Software Foundation, Inc.
-See the end for copying conditions.
-
-All changes mentioned here are more fully described in the GNU make
-manual, which is contained in this distribution as the file make.texinfo.
-
-Please send GNU make bug reports to <bug-make@gnu.org>.
-See the README file and the GNU make manual for details on sending bug
-reports.
-
-Version 3.79.1
-
-* .SECONDARY with no prerequisites now prevents any target from being
-  removed because make thinks it's an intermediate file, not just those
-  listed in the makefile.
-
-* New configure option --disable-nsec-timestamps will keep make from
-  using sub-second timestamps on systems which support it.  If your
-  build process depends on proper timestamp-preserving behavior of tools
-  like "cp -p" you might need this option, since "cp -p" (right now)
-  doesn't preserve the sub-second portion of the timestamp.
-
-Version 3.79
-
-* GNU make optionally supports internationalization and locales via the
-  GNU gettext (or local gettext if suitable) package.  See the ABOUT-NLS
-  file for more information on configuring GNU make for NLS.
-
-* Previously, GNU make quoted variables such as MAKEFLAGS and
-  MAKEOVERRIDES for proper parsing by the shell.  This allowed them to
-  be used within make build scripts.  However, using them there is not
-  proper behavior: they are meant to be passed to subshells via the
-  environment.  Unfortunately the values were not quoted properly to be
-  passed through the environment.  This meant that make didn't properly
-  pass some types of command line values to submakes.
-
-  With this version we change that behavior: now these variables are
-  quoted properly for passing through the environment, which is the
-  correct way to do it.  If you previously used these variables
-  explicitly within a make rule you may need to re-examine your use for
-  correctness given this change.
-
-* A new psuedo-target .NOTPARALLEL is available.  If defined, the
-  current makefile is run serially regardless of the value of -j.
-  However, submakes are still eligible for parallel execution.
-
-* The --debug option has changed: it now allows optional flags
-  controlling the amount and type of debugging output.  By default only
-  a minimal amount information is generated, displaying the names of
-  "normal" targets (not makefiles) that were deemed out of date and in
-  need of being rebuilt.
-
-  Note that the -d option behaves as before: it takes no arguments and
-  all debugging information is generated.
-
-* The `-p' (print database) output now includes filename and linenumber
-  information for variable definitions, to aid debugging.
-
-* The wordlist function no longer reverses its arguments if the "start"
-  value is greater than the "end" value.  If that's true, nothing is
-  returned.
-
-* Hartmut Becker provided many updates for the VMS port of GNU make.
-  See the readme.vms file for more details.
-
-Version 3.78
-
-* Two new functions, $(error ...) and $(warning ...) are available.  The
-  former will cause make to fail and exit immediately upon expansion of
-  the function, with the text provided as the error message.  The latter
-  causes the text provided to be printed as a warning message, but make
-  proceeds normally.
-
-* A new function $(call ...) is available.  This allows users to create
-  their own parameterized macros and invoke them later.  Original
-  implementation of this function was provided by Han-Wen Nienhuys
-  <hanwen@cs.uu.nl>.
-
-* A new function $(if ...) is available.  It provides if-then-else
-  capabilities in a builtin function.  Original implementation of this
-  function was provided by Han-Wen Nienhuys <hanwen@cs.uu.nl>.
-
-* Make defines a new variable, .LIBPATTERNS.  This variable controls how
-  library dependency expansion (dependencies like ``-lfoo'') is performed.
-
-* Make accepts CRLF sequences as well as traditional LF, for
-  compatibility with makefiles created on other operating systems.
-
-* Make accepts a new option: -R, or --no-builtin-variables.  This option
-  disables the definition of the rule-specific builtin variables (CC,
-  LD, AR, etc.).  Specifying this option forces -r (--no-builtin-rules)
-  as well.
-
-* A "job server" feature, suggested by Howard Chu <hyc@highlandsun.com>.
-
-  On systems that support POSIX pipe(2) semantics, GNU make can now pass
-  -jN options to submakes rather than forcing them all to use -j1.  The
-  top make and all its sub-make processes use a pipe to communicate with
-  each other to ensure that no more than N jobs are started across all
-  makes.  To get the old behavior of -j back, you can configure make
-  with the --disable-job-server option.
-
-* The confusing term "dependency" has been replaced by the more accurate
-  and standard term "prerequisite", both in the manual and in all GNU make
-  output.
-
-* GNU make supports the "big archive" library format introduced in AIX 4.3.
-
-* GNU make supports large files on AIX, HP-UX, and IRIX.  These changes
-  were provided by Paul Eggert <eggert@twinsun.com>.  (Large file
-  support for Solaris and Linux was introduced in 3.77, but the
-  configuration had issues: these have also been resolved).
-
-* The Windows 95/98/NT (W32) version of GNU make now has native support
-  for the Cygnus Cygwin release B20.1 shell (bash).
-
-* The GNU make regression test suite, long available separately "under
-  the table", has been integrated into the release.  You can invoke it
-  by running "make check" in the distribution.  Note that it requires
-  Perl (either Perl 4 or Perl 5) to run.
-
-Version 3.77
-
-* Implement BSD make's "?=" variable assignment operator.  The variable
-  is assigned the specified value only if that variable is not already
-  defined.
-
-* Make defines a new variable, "CURDIR", to contain the current working
-  directory (after the -C option, if any, has been processed).
-  Modifying this variable has no effect on the operation of make.
-
-* Make defines a new default RCS rule, for new-style master file
-  storage: ``% :: RCS/%'' (note no ``,v'' suffix).
-
-  Make defines new default rules for DOS-style C++ file naming
-  conventions, with ``.cpp'' suffixes.  All the same rules as for
-  ``.cc'' and ``.C'' suffixes are provided, along with LINK.cpp and
-  COMPILE.cpp macros (which default to the same value as LINK.cc and
-  COMPILE.cc).  Note CPPFLAGS is still C preprocessor flags!  You should
-  use CXXFLAGS to change C++ compiler flags.
-
-* A new feature, "target-specific variable values", has been added.
-  This is a large change so please see the appropriate sections of the
-  manual for full details.  Briefly, syntax like this:
-
-    TARGET: VARIABLE = VALUE
-
-  defines VARIABLE as VALUE within the context of TARGET.  This is
-  similar to SunOS make's "TARGET := VARIABLE = VALUE" feature.  Note
-  that the assignment may be of any type, not just recursive, and that
-  the override keyword is available.
-
-  COMPATIBILITY: This new syntax means that if you have any rules where
-  the first or second dependency has an equal sign (=) in its name,
-  you'll have to escape them with a backslash: "foo : bar\=baz".
-  Further, if you have any dependencies which already contain "\=",
-  you'll have to escape both of them: "foo : bar\\\=baz".
-
-* A new appendix listing the most common error and warning messages
-  generated by GNU make, with some explanation, has been added to the
-  GNU make User's Manual.
-
-* Updates to the GNU make Customs library support (see README.customs).
-
-* Updates to the Windows 95/NT port from Rob Tulloh (see README.W32),
-  and to the DOS port from Eli Zaretski (see README.DOS).
-
-Version 3.76.1
-
-* Small (but serious) bug fix.  Quick rollout to get into the GNU source CD.
-
-Version 3.76
-
-* GNU make now uses automake to control Makefile.in generation.  This
-  should make it more consistent with the GNU standards.
-
-* VPATH functionality has been changed to incorporate the VPATH+ patch,
-  previously maintained by Paul Smith <psmith@baynetworks.com>.  See the
-  manual.
-
-* Make defines a new variable, `MAKECMDGOALS', to contain the goals that
-  were specified on the command line, if any.  Modifying this variable
-  has no effect on the operation of make.
-
-* A new function, `$(wordlist S,E,TEXT)', is available: it returns a
-  list of words from number S to number E (inclusive) of TEXT.
-
-* Instead of an error, detection of future modification times gives a
-  warning and continues.  The warning is repeated just before GNU make
-  exits, so it is less likely to be lost.
-
-* Fix the $(basename) and $(suffix) functions so they only operate on
-  the last filename, not the entire string:
-
-      Command              Old Result             New Result
-      -------              ----------             ----------
-    $(basename a.b)        a                      a
-    $(basename a.b/c)      a                      a.b/c
-    $(suffix a.b)          b                      b
-    $(suffix a.b/c)        b/c                    <empty>
-
-* The $(strip) function now removes newlines as well as TABs and spaces.
-
-* The $(shell) function now changes CRLF (\r\n) pairs to a space as well
-  as newlines (\n).
-
-* Updates to the Windows 95/NT port from Rob Tulloh (see README.W32).
-
-* Eli Zaretskii has updated the port to 32-bit protected mode on MSDOS
-  and MS-Windows, building with the DJGPP v2 port of GNU C/C++ compiler
-  and utilities.  See README.DOS for details, and direct all questions
-  concerning this port to Eli Zaretskii <eliz@is.elta.co.il> or DJ
-  Delorie <dj@delorie.com>.
-
-* John W. Eaton has updated the VMS port to support libraries and VPATH.
-
-Version 3.75
-
-* The directory messages printed by `-w' and implicitly in sub-makes,
-  are now omitted if Make runs no commands and has no other messages to print.
-
-* Make now detects files that for whatever reason have modification times
-  in the future and gives an error.  Files with such impossible timestamps
-  can result from unsynchronized clocks, or archived distributions
-  containing bogus timestamps; they confuse Make's dependency engine
-  thoroughly.
-
-* The new directive `sinclude' is now recognized as another name for
-  `-include', for compatibility with some other Makes.
-
-* Aaron Digulla has contributed a port to AmigaDOS.  See README.Amiga for
-  details, and direct all Amiga-related questions to <digulla@fh-konstanz.de>.
-
-* Rob Tulloh of Tivoli Systems has contributed a port to Windows NT or 95.
-  See README.W32 for details, and direct all Windows-related questions to
-  <rob_tulloh@tivoli.com>.
-
-Version 3.73
-
-* Converted to use Autoconf version 2, so `configure' has some new options.
-  See INSTALL for details.
-
-* You can now send a SIGUSR1 signal to Make to toggle printing of debugging
-  output enabled by -d, at any time during the run.
-
-Version 3.72
-
-* DJ Delorie has ported Make to MS-DOS using the GO32 extender.
-  He is maintaining the DOS port, not the GNU Make maintainer;
-  please direct bugs and questions for DOS to <djgpp@sun.soe.clarkson.edu>.
-  MS-DOS binaries are available for FTP from ftp.simtel.net in
-  /pub/simtelnet/gnu/djgpp/.
-
-* The `MAKEFLAGS' variable (in the environment or in a makefile) can now
-  contain variable definitions itself; these are treated just like
-  command-line variable definitions.  Make will automatically insert any
-  variable definitions from the environment value of `MAKEFLAGS' or from
-  the command line, into the `MAKEFLAGS' value exported to children.  The
-  `MAKEOVERRIDES' variable previously included in the value of `$(MAKE)'
-  for sub-makes is now included in `MAKEFLAGS' instead.  As before, you can
-  reset `MAKEOVERRIDES' in your makefile to avoid putting all the variables
-  in the environment when its size is limited.
-
-* If `.DELETE_ON_ERROR' appears as a target, Make will delete the target of
-  a rule if it has changed when its commands exit with a nonzero status,
-  just as when the commands get a signal.
-
-* The automatic variable `$+' is new.  It lists all the dependencies like
-  `$^', but preserves duplicates listed in the makefile.  This is useful
-  for linking rules, where library files sometimes need to be listed twice
-  in the link order.
-
-* You can now specify the `.IGNORE' and `.SILENT' special targets with
-  dependencies to limit their effects to those files.  If a file appears as
-  a dependency of `.IGNORE', then errors will be ignored while running the
-  commands to update that file.  Likewise if a file appears as a dependency
-  of `.SILENT', then the commands to update that file will not be printed
-  before they are run.  (This change was made to conform to POSIX.2.)
-
-Version 3.71
-
-* The automatic variables `$(@D)', `$(%D)', `$(*D)', `$(<D)', `$(?D)', and
-  `$(^D)' now omit the trailing slash from the directory name.  (This change
-  was made to comply with POSIX.2.)
-
-* The source distribution now includes the Info files for the Make manual.
-  There is no longer a separate distribution containing Info and DVI files.
-
-* You can now set the variables `binprefix' and/or `manprefix' in
-  Makefile.in (or on the command line when installing) to install GNU make
-  under a name other than `make' (i.e., ``make binprefix=g install''
-  installs GNU make as `gmake').
-
-* The built-in Texinfo rules use the new variables `TEXI2DVI_FLAGS' for
-  flags to the `texi2dvi' script, and `MAKEINFO_FLAGS' for flags to the
-  Makeinfo program.
-
-* The exit status of Make when it runs into errors is now 2 instead of 1.
-  The exit status is 1 only when using -q and some target is not up to date.
-  (This change was made to comply with POSIX.2.)
-
-Version 3.70
-
-* It is no longer a fatal error to have a NUL character in a makefile.
-  You should never put a NUL in a makefile because it can have strange
-  results, but otherwise empty lines full of NULs (such as produced by
-  the `xmkmf' program) will always work fine.
-
-* The error messages for nonexistent included makefiles now refer to the
-  makefile name and line number where the `include' appeared, so Emacs's
-  C-x ` command takes you there (in case it's a typo you need to fix).
-
-Version 3.69
-
-* Implicit rule search for archive member references is now done in the
-  opposite order from previous versions: the whole target name `LIB(MEM)'
-  first, and just the member name and parentheses `(MEM)' second.
-
-* Make now gives an error for an unterminated variable or function reference.
-  For example, `$(foo' with no matching `)' or `${bar' with no matching `}'.
-
-* The new default variable `MAKE_VERSION' gives the version number of
-  Make, and a string describing the remote job support compiled in (if any).
-  Thus the value (in this release) is something like `3.69' or `3.69-Customs'.
-
-* Commands in an invocation of the `shell' function are no longer run with
-  a modified environment like target commands are.  As in versions before
-  3.68, they now run with the environment that `make' started with.  We
-  have reversed the change made in version 3.68 because it turned out to
-  cause a paradoxical situation in cases like:
-
-	export variable = $(shell echo value)
-
-  When Make attempted to put this variable in the environment for a target
-  command, it would try expand the value by running the shell command
-  `echo value'.  In version 3.68, because it constructed an environment
-  for that shell command in the same way, Make would begin to go into an
-  infinite loop and then get a fatal error when it detected the loop.
-
-* The commands given for `.DEFAULT' are now used for phony targets with no
-  commands.
-
-Version 3.68
-
-* You can list several archive member names inside parenthesis:
-  `lib(mem1 mem2 mem3)' is equivalent to `lib(mem1) lib(mem2) lib(mem3)'.
-
-* You can use wildcards inside archive member references.  For example,
-  `lib(*.o)' expands to all existing members of `lib' whose names end in
-  `.o' (e.g. `lib(a.o) lib(b.o)'); `*.a(*.o)' expands to all such members
-  of all existing files whose names end in `.a' (e.g. `foo.a(a.o)
-  foo.a(b.o) bar.a(c.o) bar.a(d.o)'.
-
-* A suffix rule `.X.a' now produces two pattern rules:
-	(%.o): %.X	# Previous versions produced only this.
-	%.a: %.X	# Now produces this as well, just like other suffixes.
-
-* The new flag `--warn-undefined-variables' says to issue a warning message
-  whenever Make expands a reference to an undefined variable.
-
-* The new `-include' directive is just like `include' except that there is
-  no error (not even a warning) for a nonexistent makefile.
-
-* Commands in an invocation of the `shell' function are now run with a
-  modified environment like target commands are, so you can use `export' et
-  al to set up variables for them.  They used to run with the environment
-  that `make' started with.
-
-Version 3.66
-
-* `make --version' (or `make -v') now exits immediately after printing
-  the version number.
-
-Version 3.65
-
-* Make now supports long-named members in `ar' archive files.
-
-Version 3.64
-
-* Make now supports the `+=' syntax for a variable definition which appends
-  to the variable's previous value.  See the section `Appending More Text
-  to Variables' in the manual for full details.
-
-* The new option `--no-print-directory' inhibits the `-w' or
-  `--print-directory' feature.  Make turns on `--print-directory'
-  automatically if you use `-C' or `--directory', and in sub-makes; some
-  users have found this behavior undesirable.
-
-* The built-in implicit rules now support the alternative extension
-  `.txinfo' for Texinfo files, just like `.texinfo' and `.texi'.
-
-Version 3.63
-
-* Make now uses a standard GNU `configure' script.  See the new file
-  INSTALL for the new (and much simpler) installation procedure.
-
-* There is now a shell script to build Make the first time, if you have no
-  other `make' program.  `build.sh' is created by `configure'; see README.
-
-* GNU Make now completely conforms to the POSIX.2 specification for `make'.
-
-* Elements of the `$^' and `$?' automatic variables that are archive
-  member references now list only the member name, as in Unix and POSIX.2.
-
-* You should no longer ever need to specify the `-w' switch, which prints
-  the current directory before and after Make runs.  The `-C' switch to
-  change directory, and recursive use of Make, now set `-w' automatically.
-
-* Multiple double-colon rules for the same target will no longer have their
-  commands run simultaneously under -j, as this could result in the two
-  commands trying to change the file at the same time and interfering with
-  one another.
-
-* The `SHELL' variable is now never taken from the environment.
-  Each makefile that wants a shell other than the default (/bin/sh) must
-  set SHELL itself.  SHELL is always exported to child processes.
-  This change was made for compatibility with POSIX.2.
-
-* Make now accepts long options.  There is now an informative usage message
-  that tells you what all the options are and what they do.  Try `make --help'.
-
-* There are two new directives: `export' and `unexport'.  All variables are
-  no longer automatically put into the environments of the commands that
-  Make runs.  Instead, only variables specified on the command line or in
-  the environment are exported by default.  To export others, use:
-	export VARIABLE
-  or you can define variables with:
-	export VARIABLE = VALUE
-  or:
-	export VARIABLE := VALUE
-  You can use just:
-	export
-  or:
-	.EXPORT_ALL_VARIABLES:
-  to get the old behavior.  See the node `Variables/Recursion' in the manual
-  for a full description.
-
-* The commands from the `.DEFAULT' special target are only applied to
-  targets which have no rules at all, not all targets with no commands.
-  This change was made for compatibility with Unix make.
-
-* All fatal error messages now contain `***', so they are easy to find in
-  compilation logs.
-
-* Dependency file names like `-lNAME' are now replaced with the actual file
-  name found, as with files found by normal directory search (VPATH).
-  The library file `libNAME.a' may now be found in the current directory,
-  which is checked before VPATH; the standard set of directories (/lib,
-  /usr/lib, /usr/local/lib) is now checked last.
-  See the node `Libraries/Search' in the manual for full details.
-
-* A single `include' directive can now specify more than one makefile to
-  include, like this:
-	include file1 file2
-  You can also use shell file name patterns in an `include' directive:
-	include *.mk
-
-* The default directories to search for included makefiles, and for
-  libraries specified with `-lNAME', are now set by configuration.
-
-* You can now use blanks as well as colons to separate the directories in a
-  search path for the `vpath' directive or the `VPATH' variable.
-
-* You can now use variables and functions in the left hand side of a
-  variable assignment, as in "$(foo)bar = value".
-
-* The `MAKE' variable is always defined as `$(MAKE_COMMAND) $(MAKEOVERRIDES)'.
-  The `MAKE_COMMAND' variable is now defined to the name with which make
-  was invoked.
-
-* The built-in rules for C++ compilation now use the variables `$(CXX)' and
-  `$(CXXFLAGS)' instead of `$(C++)' and `$(C++FLAGS)'.  The old names had
-  problems with shells that cannot have `+' in environment variable names.
-
-* The value of a recursively expanded variable is now expanded when putting
-  it into the environment for child processes.  This change was made for
-  compatibility with Unix make.
-
-* A rule with no targets before the `:' is now accepted and ignored.
-  This change was made for compatibility with SunOS 4 make.
-  We do not recommend that you write your makefiles to take advantage of this.
-
-* The `-I' switch can now be used in MAKEFLAGS, and are put there
-  automatically just like other switches.
-
-Version 3.61
-
-* Built-in rules for C++ source files with the `.C' suffix.
-  We still recommend that you use `.cc' instead.
-
-* If commands are given too many times for a single target,
-  the last set given is used, and a warning message is printed.
-
-* Error messages about makefiles are in standard GNU error format,
-  so C-x ` in Emacs works on them.
-
-* Dependencies of pattern rules which contain no % need not actually exist
-  if they can be created (just like dependencies which do have a %).
-
-Version 3.60
-
-* A message is always printed when Make decides there is nothing to be done.
-  It used to be that no message was printed for top-level phony targets
-  (because "`phony' is up to date" isn't quite right).  Now a different
-  message "Nothing to be done for `phony'" is printed in that case.
-
-* Archives on AIX now supposedly work.
-
-* When the commands specified for .DEFAULT are used to update a target,
-  the $< automatic variable is given the same value as $@ for that target.
-  This is how Unix make behaves, and this behavior is mandated by POSIX.2.
-
-Version 3.59
-
-* The -n, -q, and -t options are not put in the `MAKEFLAGS' and `MFLAG'
-  variables while remaking makefiles, so recursive makes done while remaking
-  makefiles will behave properly.
-
-* If the special target `.NOEXPORT' is specified in a makefile,
-  only variables that came from the environment and variables
-  defined on the command line are exported.
-
-Version 3.58
-
-* Suffix rules may have dependencies (which are ignored).
-
-Version 3.57
-
-* Dependencies of the form `-lLIB' are searched for as /usr/local/lib/libLIB.a
-  as well as libLIB.a in /usr/lib, /lib, the current directory, and VPATH.
-
-Version 3.55
-
-* There is now a Unix man page for GNU Make.  It is certainly not a replacement
-for the Texinfo manual, but it documents the basic functionality and the
-switches.  For full documentation, you should still read the Texinfo manual.
-Thanks to Dennis Morse of Stanford University for contributing the initial
-version of this.
-
-* Variables which are defined by default (e.g., `CC') will no longer be put
-into the environment for child processes.  (If these variables are reset by the
-environment, makefiles, or the command line, they will still go into the
-environment.)
-
-* Makefiles which have commands but no dependencies (and thus are always
-  considered out of date and in need of remaking), will not be remade (if they
-  were being remade only because they were makefiles).  This means that GNU
-  Make will no longer go into an infinite loop when fed the makefiles that
-  `imake' (necessary to build X Windows) produces.
-
-* There is no longer a warning for using the `vpath' directive with an explicit
-pathname (instead of a `%' pattern).
-
-Version 3.51
-
-* When removing intermediate files, only one `rm' command line is printed,
-listing all file names.
-
-* There are now automatic variables `$(^D)', `$(^F)', `$(?D)', and `$(?F)'.
-These are the directory-only and file-only versions of `$^' and `$?'.
-
-* Library dependencies given as `-lNAME' will use "libNAME.a" in the current
-directory if it exists.
-
-* The automatic variable `$($/)' is no longer defined.
-
-* Leading `+' characters on a command line make that line be executed even
-under -n, -t, or -q (as if the line contained `$(MAKE)').
-
-* For command lines containing `$(MAKE)', `${MAKE}', or leading `+' characters,
-only those lines are executed, not their entire rules.
-(This is how Unix make behaves for lines containing `$(MAKE)' or `${MAKE}'.)
-
-Version 3.50
-
-* Filenames in rules will now have ~ and ~USER expanded.
-
-* The `-p' output has been changed so it can be used as a makefile.
-(All information that isn't specified by makefiles is prefaced with comment
-characters.)
-
-Version 3.49
-
-* The % character can be quoted with backslash in implicit pattern rules,
-static pattern rules, `vpath' directives, and `patsubst', `filter', and
-`filter-out' functions.  A warning is issued if a `vpath' directive's
-pattern contains no %.
-
-* The `wildcard' variable expansion function now expands ~ and ~USER.
-
-* Messages indicating failed commands now contain the target name:
-	make: *** [target] Error 1
-
-* The `-p' output format has been changed somewhat to look more like
-makefile rules and to give all information that Make has about files.
-
-Version 3.48
-
-Version 3.47
-
-* The `-l' switch with no argument removes any previous load-average limit.
-
-* When the `-w' switch is in effect, and Make has updated makefiles,
-it will write a `Leaving directory' messagfe before re-executing itself.
-This makes the `directory change tracking' changes to Emacs's compilation
-commands work properly.
-
-Version 3.46
-
-* The automatic variable `$*' is now defined for explicit rules,
-as it is in Unix make.
-
-Version 3.45
-
-* The `-j' switch is now put in the MAKEFLAGS and MFLAGS variables when
-specified without an argument (indicating infinite jobs).
-The `-l' switch is not always put in the MAKEFLAGS and MFLAGS variables.
-
-* Make no longer checks hashed directories after running commands.
-The behavior implemented in 3.41 caused too much slowdown.
-
-Version 3.44
-
-* A dependency is NOT considered newer than its dependent if
-they have the same modification time.  The behavior implemented
-in 3.43 conflicts with RCS.
-
-Version 3.43
-
-* Dependency loops are no longer fatal errors.
-
-* A dependency is considered newer than its dependent if
-they have the same modification time.
-
-Version 3.42
-
-* The variables F77 and F77FLAGS are now set by default to $(FC) and
-$(FFLAGS).  Makefiles designed for System V make may use these variables in
-explicit rules and expect them to be set.  Unfortunately, there is no way to
-make setting these affect the Fortran implicit rules unless FC and FFLAGS
-are not used (and these are used by BSD make).
-
-Version 3.41
-
-* Make now checks to see if its hashed directories are changed by commands.
-Other makes that hash directories (Sun, 4.3 BSD) don't do this.
-
-Version 3.39
-
-* The `shell' function no longer captures standard error output.
-
-Version 3.32
-
-* A file beginning with a dot can be the default target if it also contains
-a slash (e.g., `../bin/foo').  (Unix make allows this as well.)
-
-Version 3.31
-
-* Archive member names are truncated to 15 characters.
-
-* Yet more USG stuff.
-
-* Minimal support for Microport System V (a 16-bit machine and a
-brain-damaged compiler).  This has even lower priority than other USG
-support, so if it gets beyond trivial, I will take it out completely.
-
-* Revamped default implicit rules (not much visible change).
-
-* The -d and -p options can come from the environment.
-
-Version 3.30
-
-* Improved support for USG and HPUX (hopefully).
-
-* A variable reference like `$(foo:a=b)', if `a' contains a `%', is
-equivalent to `$(patsubst a,b,$(foo))'.
-
-* Defining .DEFAULT with no deps or commands clears its commands.
-
-* New default implicit rules for .S (cpp, then as), and .sh (copy and make
-executable).  All default implicit rules that use cpp (even indirectly), use
-$(CPPFLAGS).
-
-Version 3.29
-
-* Giving the -j option with no arguments gives you infinite jobs.
-
-Version 3.28
-
-* New option: "-l LOAD" says not to start any new jobs while others are
-running if the load average is not below LOAD (a floating-point number).
-
-* There is support in place for implementations of remote command execution
-in Make.  See the file remote.c.
-
-Version 3.26
-
-* No more than 10 directories will be kept open at once.
-(This number can be changed by redefining MAX_OPEN_DIRECTORIES in dir.c.)
-
-Version 3.25
-
-* Archive files will have their modification times recorded before doing
-anything that might change their modification times by updating an archive
-member.
-
-Version 3.20
-
-* The `MAKELEVEL' variable is defined for use by makefiles.
-
-Version 3.19
-
-* The recursion level indications in error messages are much shorter than
-they were in version 3.14.
-
-Version 3.18
-
-* Leading spaces before directives are ignored (as documented).
-
-* Included makefiles can determine the default goal target.
-(System V Make does it this way, so we are being compatible).
-
-Version 3.14.
-
-* Variables that are defaults built into Make will not be put in the
-environment for children.  This just saves some environment space and,
-except under -e, will be transparent to sub-makes.
-
-* Error messages from sub-makes will indicate the level of recursion.
-
-* Hopefully some speed-up for large directories due to a change in the
-directory hashing scheme.
-
-* One child will always get a standard input that is usable.
-
-* Default makefiles that don't exist will be remade and read in.
-
-Version 3.13.
-
-* Count parentheses inside expansion function calls so you can
-have nested calls: `$(sort $(foreach x,a b,$(x)))'.
-
-Version 3.12.
-
-* Several bug fixes, including USG and Sun386i support.
-
-* `shell' function to expand shell commands a la `
-
-* If the `-d' flag is given, version information will be printed.
-
-* The `-c' option has been renamed to `-C' for compatibility with tar.
-
-* The `-p' option no longer inhibits other normal operation.
-
-* Makefiles will be updated and re-read if necessary.
-
-* Can now run several commands at once (parallelism), -j option.
-
-* Error messages will contain the level of Make recursion, if any.
-
-* The `MAKEFLAGS' and `MFLAGS' variables will be scanned for options after
-makefiles are read.
-
-* A double-colon rule with no dependencies will always have its commands run.
-(This is how both the BSD and System V versions of Make do it.)
-
-Version 3.05
-
-(Changes from versions 1 through 3.05 were never recorded.  Sorry.)
-
-----------------------------------------------------------------------
-Copyright information:
-
-   Permission is granted to anyone to make or distribute verbatim copies
-   of this document as received, in any medium, provided that the
-   copyright notice and this permission notice are preserved, thus
-   giving the recipient permission to redistribute in turn.
-
-   Permission is granted to distribute modified versions of this
-   document, or of portions of it, under the above conditions, provided
-   also that they carry prominent notices stating who last changed them.

buildtools/windows/source/make-3.79.1/NMakefile

@@ -1,165 +0,0 @@
-# NOTE: If you have no `make' program at all to process this makefile, run
-# `build_w32.bat' instead.
-#
-# Copyright (C) 1988,89,91,92,93,94,95,96,97 Free Software Foundation, Inc.
-# This file is part of GNU Make.
-#
-# GNU Make is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# GNU Make is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Make; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-#
-#       NMakefile for GNU Make
-#
-
-LINK = link
-CC = cl
-
-OUTDIR=.
-MAKEFILE=NMakefile
-SUBPROC_MAKEFILE=NMakefile
-
-CFLAGS_any = /nologo /MT /W3 /GX /Zi /YX /I . /I glob /I w32/include /D WIN32 /D WINDOWS32 /D _CONSOLE /D HAVE_CONFIG_H /D MOZILLA
-CFLAGS_debug = $(CFLAGS_any) /Od /D DEBUG /D _DEBUG /FR.\WinDebug/ /Fp.\WinDebug/make.pch /Fo.\WinDebug/ /Fd.\WinDebug/make.pdb
-CFLAGS_release = $(CFLAGS_any) /O2 /D NDEBUG /FR.\WinRel/ /Fp.\WinRel/make.pch /Fo.\WinRel/
-
-LDFLAGS_debug = w32\subproc\WinDebug\subproc.lib /NOLOGO /SUBSYSTEM:console\
-	/INCREMENTAL:no /PDB:WinDebug/make.pdb /MACHINE:I386 \
-	/OUT:WinDebug/make.exe /DEBUG
-LDFLAGS_release = w32\subproc\WinRel\subproc.lib /NOLOGO /SUBSYSTEM:console\
-	/INCREMENTAL:no /MACHINE:I386 /OUT:WinRel/make.exe
-
-all: config.h subproc Release Debug
-
-#
-# Make sure we build the subproc library first. It has it's own
-# makefile. To be portable to Windows 95, we put the instructions
-# on how to build the library into a batch file. On NT, we could
-# simply have done foo && bar && dog, but this doesn't port.
-#
-subproc: w32/subproc/WinDebug/subproc.lib w32/subproc/WinRel/subproc.lib
-
-w32/subproc/WinDebug/subproc.lib w32/subproc/WinRel/subproc.lib: w32/subproc/misc.c w32/subproc/sub_proc.c w32/subproc/w32err.c
-	subproc.bat $(SUBPROC_MAKEFILE) $(MAKE)
-	if exist WinDebug\make.exe erase WinDebug\make.exe
-	if exist WinRel\make.exe erase WinRel\make.exe
-
-config.h: config.h.W32
-	copy $? $@
-
-Release:
-	$(MAKE) /f $(MAKEFILE) LDFLAGS="$(LDFLAGS_release)" CFLAGS="$(CFLAGS_release)" OUTDIR=WinRel WinRel/make.exe
-Debug:
-	$(MAKE) /f $(MAKEFILE) LDFLAGS="$(LDFLAGS_debug)" CFLAGS="$(CFLAGS_debug)" OUTDIR=WinDebug WinDebug/make.exe
-
-clean:
-	if exist WinDebug\nul rmdir /s /q WinDebug
-	if exist WinRel\nul rmdir /s /q WinRel
-	if exist w32\subproc\WinDebug\nul rmdir /s /q w32\subproc\WinDebug
-	if exist w32\subproc\WinRel\nul rmdir /s /q w32\subproc\WinRel
-	if exist config.h erase config.h
-	erase *.pdb
-
-$(OUTDIR):
-	if not exist .\$@\nul mkdir .\$@
-
-LIBS = kernel32.lib user32.lib advapi32.lib
-
-OBJS = \
-	$(OUTDIR)/ar.obj \
-	$(OUTDIR)/arscan.obj \
-	$(OUTDIR)/commands.obj \
-	$(OUTDIR)/default.obj \
-	$(OUTDIR)/dir.obj \
-	$(OUTDIR)/expand.obj \
-	$(OUTDIR)/file.obj \
-	$(OUTDIR)/function.obj \
-	$(OUTDIR)/getloadavg.obj \
-	$(OUTDIR)/getopt.obj \
-	$(OUTDIR)/getopt1.obj \
-	$(OUTDIR)/implicit.obj \
-	$(OUTDIR)/job.obj \
-	$(OUTDIR)/main.obj \
-	$(OUTDIR)/misc.obj \
-	$(OUTDIR)/read.obj \
-	$(OUTDIR)/remake.obj \
-	$(OUTDIR)/remote-stub.obj \
-	$(OUTDIR)/rule.obj \
-	$(OUTDIR)/signame.obj \
-	$(OUTDIR)/variable.obj \
-	$(OUTDIR)/version.obj \
-	$(OUTDIR)/vpath.obj \
-	$(OUTDIR)/glob.obj \
-	$(OUTDIR)/fnmatch.obj \
-	$(OUTDIR)/dirent.obj \
-	$(OUTDIR)/pathstuff.obj
-
-$(OUTDIR)/make.exe: $(OUTDIR) $(OBJS)
-	$(LINK) @<<
-		$(LDFLAGS) $(LIBS) $(OBJS)
-<<
-
-.c{$(OUTDIR)}.obj:
-	$(CC) $(CFLAGS) /c $<
-
-$(OUTDIR)/glob.obj : glob/glob.c
-	$(CC) $(CFLAGS) /c $?
-$(OUTDIR)/fnmatch.obj : glob/fnmatch.c
-	$(CC) $(CFLAGS) /c $?
-$(OUTDIR)/dirent.obj : w32/compat/dirent.c
-	$(CC) $(CFLAGS) /c $?
-$(OUTDIR)/pathstuff.obj : w32/pathstuff.c
-	$(CC) $(CFLAGS) /c $?
-
-# --------------- DEPENDENCIES
-#
-$(OUTDIR)/alloca.obj: alloca.c config.h
-$(OUTDIR)/ar.obj: ar.c make.h config.h gettext.h filedef.h dep.h glob/fnmatch.h
-$(OUTDIR)/arscan.obj: arscan.c make.h config.h gettext.h
-$(OUTDIR)/commands.obj: commands.c make.h config.h gettext.h dep.h filedef.h \
-	variable.h job.h commands.h
-$(OUTDIR)/default.obj: default.c make.h config.h gettext.h rule.h dep.h filedef.h \
-	job.h commands.h variable.h
-$(OUTDIR)/dir.obj: dir.c make.h config.h gettext.h glob/glob.h
-$(OUTDIR)/expand.obj: expand.c make.h config.h gettext.h filedef.h job.h commands.h \
-	variable.h rule.h
-$(OUTDIR)/file.obj: file.c make.h config.h gettext.h dep.h filedef.h job.h \
-	commands.h variable.h
-$(OUTDIR)/function.obj: function.c make.h config.h gettext.h filedef.h variable.h \
-	dep.h job.h commands.h debug.h
-$(OUTDIR)/getloadavg.obj: getloadavg.c config.h
-$(OUTDIR)/getopt.obj: getopt.c config.h gettext.h getopt.h
-$(OUTDIR)/getopt1.obj: getopt1.c config.h getopt.h
-$(OUTDIR)/gettext.obj: gettext.c config.h gettext.h
-$(OUTDIR)/implicit.obj: implicit.c make.h config.h gettext.h rule.h dep.h filedef.h \
-	debug.h
-$(OUTDIR)/job.obj: job.c make.h config.h gettext.h job.h debug.h filedef.h \
-	commands.h variable.h
-$(OUTDIR)/main.obj: main.c make.h config.h gettext.h dep.h filedef.h variable.h \
-	job.h commands.h rule.h debug.h getopt.h
-$(OUTDIR)/misc.obj: misc.c make.h config.h gettext.h dep.h debug.h
-$(OUTDIR)/read.obj: read.c make.h config.h gettext.h glob/glob.h dep.h filedef.h \
-	job.h commands.h variable.h rule.h debug.h
-$(OUTDIR)/remake.obj: remake.c make.h config.h gettext.h filedef.h job.h commands.h \
-	dep.h variable.h debug.h
-$(OUTDIR)/remote-stub.obj: remote-stub.c make.h config.h gettext.h filedef.h job.h \
-	commands.h
-$(OUTDIR)/rule.obj: rule.c make.h config.h gettext.h dep.h filedef.h job.h \
-	commands.h variable.h rule.h
-$(OUTDIR)/signame.obj: signame.c make.h config.h gettext.h signame.h
-$(OUTDIR)/variable.obj: variable.c make.h config.h gettext.h dep.h filedef.h job.h \
-	commands.h variable.h rule.h
-$(OUTDIR)/version.obj: version.c config.h
-$(OUTDIR)/vpath.obj: vpath.c make.h config.h gettext.h filedef.h variable.h
-

buildtools/windows/source/make-3.79.1/README

@@ -1,134 +0,0 @@
-This directory contains the 3.79.1 release of GNU Make.
-
-See the file NEWS for the user-visible changes from previous releases.
-In addition, there have been bugs fixed.
-
-Please check the system-specific notes below for any caveats related to
-your operating system.
-
-For general building and installation instructions, see the file INSTALL.
-
-If you need to build GNU Make and have no other `make' program to use,
-you can use the shell script `build.sh' instead.  To do this, first run
-`configure' as described in INSTALL.  Then, instead of typing `make' to
-build the program, type `sh build.sh'.  This should compile the program
-in the current directory.  Then you will have a Make program that you can
-use for `./make install', or whatever else.
-
-Some systems' Make programs are broken and cannot process the Makefile for
-GNU Make.  If you get errors from your system's Make when building GNU
-Make, try using `build.sh' instead.
-
-
-GNU Make is free software.  See the file COPYING for copying conditions.
-
-
-Documentation
--------------
-
-GNU make is fully documented in the GNU Make manual, which is contained
-in this distribution as the file make.texinfo.  You can also find
-on-line and preformatted (PostScript and DVI) versions at the FSF's web
-site.  There is information there about ordering hardcopy documentation.
-
-  http://www.gnu.org/
-  http://www.gnu.org/doc/doc.html
-  http://www.gnu.org/manual/manual.html
-
-You can also find the latest versions of GNU Make from there.
-
-
-Bug Reporting
--------------
-
-You can send GNU make bug reports to <bug-make@gnu.org>.  Please see the
-section of the GNU make manual entitled `Problems and Bugs' for
-information on submitting useful and complete bug reports.
-
-You can also use the FSF's online bug tracking system to submit new
-problem reports or search for existing ones.  A web interface is
-available here:
-
-  http://www-gnats.gnu.org:8080/cgi-bin/wwwgnats.pl
-
-Use the Category "make".
-
-If you need help using GNU make, try these forums:
-
-  help-make@gnu.org
-  help-utils@gnu.org
-  news:gnu.utils.help
-  news:gnu.utils.bug
-
-
-CVS Access
-----------
-
-The GNU make source repository is available via anonymous CVS from the
-GNU Subversions CVS server; look here for details:
-
-  http://www.gnu.org/software/devel.html
-
-Please note: you won't be able to build GNU make from CVS without
-installing appropriate maintainer's tools, such as automake, autoconf,
-GNU make, and GCC.  There are no instructions on this included with the
-tree, so you must be familiar with the installation and use of these
-tools.  We make no guarantees about the contents or quality of the
-latest code in the CVS repository: it is not unheard of for code that is
-known to be broken to be checked in.  Use at your own risk.
-
-
-Ports
------
-
-  - See README.customs for details on integrating GNU make with the
-    Customs distributed build environment from the Pmake distribution.
-
-  - See readme.vms for details about GNU Make on OpenVMS.
-
-  - See README.Amiga for details about GNU Make on AmigaDOS.
-
-  - See README.W32 for details about GNU Make on Windows NT, 95, or 98.
-
-  - See README.DOS for compilation instructions on MS-DOS and MS-Windows
-    using DJGPP tools.
-
-    A precompiled binary of the MSDOS port of GNU Make is available as part
-    of DJGPP; see the WWW page http://www.delorie.com/djgpp/ for more
-    information.
-
-Please note there are two _separate_ ports of GNU make for Microsoft
-systems: a native Windows tool built with (for example) MSVC or Cygwin,
-and a DOS-based tool built with DJGPP.  Please be sure you are looking
-at the right README!
-
-
-System-specific Notes
----------------------
-
-It has been reported that the XLC 1.2 compiler on AIX 3.2 is buggy such
-that if you compile make with `cc -O' on AIX 3.2, it will not work correctly.
-It is said that using `cc' without `-O' does work.
-
-One area that is often a problem in configuration and porting is the code
-to check the system's current load average.  To make it easier to test and
-debug this code, you can do `make check-loadavg' to see if it works
-properly on your system.  (You must run `configure' beforehand, but you
-need not build Make itself to run this test.)
-
-Another potential source of porting problems is the support for large
-files (LFS) in configure for those operating systems that provide it.
-Please report any bugs that you find in this area.  If you run into
-difficulties, then as a workaround you should be able to disable LFS by
-adding the `--disable-largefile' option to the `configure' script.
-
-On systems that support micro- and nano-second timestamp values and
-where stat(2) provides this information, GNU make will use it when
-comparing timestamps to get the most accurate possible result.  However,
-at the moment there is no system call (that I'm aware of) that will
-allow you to *set* a timestamp to a micro- or nano-second granularity.
-This means that "cp -p" and other similar tools (tar, etc.) cannot
-exactly duplicate timestamps with micro- and nano-second granularity.
-If your build system contains rules that depend on proper behavior of
-tools like "cp -p", you should configure make to not use micro- and
-nano-second timestamps with the --disable-nsec-timestamps flag.

buildtools/windows/source/make-3.79.1/README.Amiga

@@ -1,61 +0,0 @@
-Short: Port of GNU make with SAS/C (no ixemul.library required)
-Author: GNU, Amiga port by Aaron "Optimizer" Digulla
-Uploader: Aaron "Optimizer" Digulla (digulla@fh-konstanz.de)
-Type: dev/c
-
-This is a pure Amiga port of GNU make. It needs no extra libraries or
-anything. It has the following features (in addition to any features of
-GNU make):
-
-- Runs Amiga-Commands with SystemTags() (Execute)
-- Can run multi-line statements
-- Allows to use Device-Names in targets:
-
-	c:make : make.o
-
-    is ok. To distinguish between device-names and target : or ::, MAKE
-    looks for spaces. If there are any around :, it's taken as a target
-    delimiter, if there are none, it's taken as the name of a device. Note
-    that "make:make.o" tries to create "make.o" on the device "make:".
-- Replaces @@ by a newline in any command line:
-
-	if exists make @@\
-	    delete make.bak quiet @@\
-	    rename make make.bak @@\
-	endif @@\
-	$(CC) Link Make.o To make
-
-    works. Note that the @@ must stand alone (ie. "make@@\" is illegal).
-    Also be carefull that there is a space after the "\" (ie, at the
-    beginning of the next line).
-- Can be made resident to save space and time
-- Amiga specific wildcards can be used in $(wildcard ...)
-
-BUGS:
-- The line
-
-    dummy.h : src/*.c
-
-tries to make dummy.h from "src/*.c" (ie. no wildcard-expansion takes
-place). You have to use "$(wildcard src/*.c)" instead.
-
-COMPILING FROM SCRATCH
-----------------------
-
-To recompile, you need SAS/C 6.51. make itself is not neccessary, there
-is an smakefile.
-
-1. Copy config.ami to config.h
-2. If you use make to compie, copy Makefile.ami to Makefile and
-    glob/Makefile.ami to glob/Makefile. Copy make into the current
-    directory.
-
-3. Run smake/make
-
-INSTALLATION
-
-Copy make somewhere in your search path (eg. sc:c or sc:bin).
-If you plan to use recursive makes, install make resident:
-
-    Resident make Add
-

buildtools/windows/source/make-3.79.1/README.DOS

@@ -1,323 +0,0 @@
-Port of GNU Make to 32-bit protected mode on MSDOS and MS-Windows.
-
-Builds with DJGPP v2 port of GNU C/C++ compiler and utilities.
-
-
-New (since 3.74) DOS-specific features:
-
-   1. Supports long filenames when run from DOS box on Windows 9x.
-
-   2. Supports both stock DOS COMMAND.COM and Unix-style shells
-      (details in ``Notes'' below).
-
-   3. Supports DOS drive letters in dependencies and pattern rules.
-
-   4. Better support for DOS-style backslashes in pathnames (but see
-      ``Notes'' below).
-
-   5. The $(shell) built-in can run arbitrary complex commands,
-      including pipes and redirection, even when COMMAND.COM is your
-      shell.
-
-   6. Can be built without floating-point code (see below).
-
-   7. Supports signals in child programs and restores the original
-      directory if the child was interrupted.
-
-   8. Can be built without (a previous version of) Make.
-
-   9. The build process requires only standard tools.  (Optional
-      targets like "install:" and "clean:" still need additional
-      programs, though, see below.)
-
-  10. Beginning with v3.78, the test suite works in the DJGPP
-      environment (requires Perl and auxiliary tools; see below).
-
-
-To install a binary distribution:
-
-   Simply unzip the makNNNb.zip file (where NNN is the version number)
-   preserving the directory structure (-d switch if you use PKUNZIP).
-   If you are installing Make on Windows 9X or Windows 2000, use an
-   unzip program that supports long filenames in zip files.  After
-   unzipping, make sure the directory with make.exe is on your PATH,
-   and that's all you need to use Make.
-
-
-To build from sources:
-
-   1. Unzip the archive, preserving the directory structure (-d switch
-      if you use PKUNZIP).  If you build Make on Windows 9X or Windows
-      2000, use an unzip program that supports long filenames in zip
-      files.
-
-      If you are unpacking an official GNU source distribution, use
-      either DJTAR (which is part of the DJGPP development
-      environment), or the DJGPP port of GNU Tar.
-
-   2. Invoke the `configure.bat' batch file.
-
-      If you are building Make in-place, i.e. in the same directory
-      where its sources are kept, just type "configure.bat" and press
-      [Enter].  Otherwise, you need to supply the path to the source
-      directory as an argument to the batch file, like this:
-
-	c:\djgpp\gnu\make-3.79.1\configure.bat c:/djgpp/gnu/make-3.79.1
-
-      Note the forward slashes in the source path argument: you MUST
-      use them here.
-
-   3. If configure.bat doesn't find a working Make, it will suggest to
-      use the `dosbuild.bat' batch file to build Make.  Either do as it
-      suggests or install another Make program (a pre-compiled binary
-      should be available from the usual DJGPP sites) and rerun
-      configure.bat.
-
-   4. If you will need to run Make on machines without an FPU, you
-      might consider building a version of Make which doesn't issue
-      floating-point instructions (they don't help much on MSDOS
-      anyway).  To this end, edit the Makefile created by
-      configure.bat and add -DNO_FLOAT to the value of CPPFLAGS.
-
-   5. Invoke Make.
-
-      If you are building from outside of the source directory, you
-      need to tell Make where the sources are, like this:
-
-	        make srcdir=c:/djgpp/gnu/make-3.79.1
-
-      (configure.bat will tell you this when it finishes).  You MUST
-      use a full, not relative, name of the source directory here, or
-      else Make might fail.
-
-   6. After Make finishes, if you have a Unix-style shell installed,
-      you can use the `install' target to install the package.  You
-      will also need GNU Fileutils and GNU Sed for this (they should
-      be available from the DJGPP sites).
-
-      By default, GNU make will install into your DJGPP installation
-      area.  If you wish to use a different directory, override the
-      DESTDIR variable when invoking "make install", like this:
-
-		make install DESTDIR=c:/other/dir
-
-      This causes the make executable to be placed in c:/other/dir/bin,
-      the man pages in c:/other/dir/man, etc.
-
-      Without a Unix-style shell, you will have to install programs
-      and the docs manually.  Copy make.exe to a directory on your
-      PATH, make.i* info files to your Info directory, and update the
-      file `dir' in your Info directory by adding the following item
-      to the main menu:
-
-	* Make: (make.info).           The GNU make utility.
-
-      If you have the `install-info' program (from the GNU Texinfo
-      package), it will do that for you if you invoke it like this:
-
-	install-info --info-dir=c:/djgpp/info c:/djgpp/info/make.info
-
-      (If your Info directory is other than C:\DJGPP\INFO, change this
-      command accordingly.)
-
-   7. The `clean' targets also require Unix-style shell, and GNU Sed
-      and `rm' programs (the latter from Fileutils).
-
-   8. To run the test suite, type "make check".  This requires a Unix
-      shell (I used the DJGPP port of Bash 2.03), Perl, Sed, Fileutils
-      and Sh-utils.
-
-
-Notes:
------
-
-   1. The shell issue.
-
-      This is probably the most significant improvement, first
-      introduced in the port of GNU Make 3.75.
-
-      The original behavior of GNU Make is to invoke commands
-      directly, as long as they don't include characters special to
-      the shell or internal shell commands, because that is faster.
-      When shell features like redirection or filename wildcards are
-      involved, Make calls the shell.
-
-      This port supports both DOS shells (the stock COMMAND.COM and its
-      4DOS/NDOS replacements), and Unix-style shells (tested with the
-      venerable Stewartson's `ms_sh' 2.3 and the DJGPP port of `bash' by
-      Daisuke Aoyama <jack@st.rim.or.jp>).
-
-      When the $SHELL variable points to a Unix-style shell, Make
-      works just like you'd expect on Unix, calling the shell for any
-      command that involves characters special to the shell or
-      internal shell commands.  The only difference is that, since
-      there is no standard way to pass command lines longer than the
-      infamous DOS 126-character limit, this port of Make writes the
-      command line to a temporary disk file and then invokes the shell
-      on that file.
-
-      If $SHELL points to a DOS-style shell, however, Make will not
-      call it automatically, as it does with Unix shells.  Stock
-      COMMAND.COM is too dumb and would unnecessarily limit the
-      functionality of Make.  For example, you would not be able to
-      use long command lines in commands that use redirection or
-      pipes.  Therefore, when presented with a DOS shell, this port of
-      Make will emulate most of the shell functionality, like
-      redirection and pipes, and shall only call the shell when a
-      batch file or a command internal to the shell is invoked.  (Even
-      when a command is an internal shell command, Make will first
-      search the $PATH for it, so that if a Makefile calls `mkdir',
-      you can install, say, a port of GNU `mkdir' and have it called
-      in that case.)
-
-      The key to all this is the extended functionality of `spawn' and
-      `system' functions from the DJGPP library; this port just calls
-      `system' where it would invoke the shell on Unix.  The most
-      important aspect of these functions is that they use a special
-      mechanism to pass long (up to 16KB) command lines to DJGPP
-      programs.  In addition, `system' emulates some internal
-      commands, like `cd' (so that you can now use forward slashes
-      with it, and can also change the drive if the directory is on
-      another drive).  Another aspect worth mentioning is that you can
-      call Unix shell scripts directly, provided that the shell whose
-      name is mentioned on the first line of the script is installed
-      anywhere along the $PATH.  It is impossible to tell here
-      everything about these functions; refer to the DJGPP library
-      reference for more details.
-
-      The $(shell) built-in is implemented in this port by calling
-      `popen'.  Since `popen' calls `system', the above considerations
-      are valid for $(shell) as well.  In particular, you can put
-      arbitrary complex commands, including pipes and redirection,
-      inside $(shell), which is in many cases a valid substitute for
-      the Unix-style command substitution (`command`) feature.
-
-
-   2. "SHELL=/bin/sh" -- or is it?
-
-      Many Unix Makefiles include a line which sets the SHELL, for
-      those versions of Make which don't have this as the default.
-      Since many DOS systems don't have `sh' installed (in fact, most
-      of them don't even have a `/bin' directory), this port takes
-      such directives with a grain of salt.  It will only honor such a
-      directive if the basename of the shell name (like `sh' in the
-      above example) can indeed be found in the directory that is
-      mentioned in the SHELL= line (`/bin' in the above example), or
-      in the current working directory, or anywhere on the $PATH (in
-      that order).  If the basename doesn't include a filename
-      extension, Make will look for any known extension that indicates
-      an executable file (.exe, .com, .bat, .btm, .sh, and even .sed
-      and .pl).  If any such file is found, then $SHELL will be
-      defined to the exact pathname of that file, and that shell will
-      hence be used for the rest of processing.  But if the named
-      shell is *not* found, the line which sets it will be effectively
-      ignored, leaving the value of $SHELL as it was before.  Since a
-      lot of decisions that this port makes depend on the gender of
-      the shell, I feel it doesn't make any sense to tailor Make's
-      behavior to a shell which is nowhere to be found.
-
-      Note that the above special handling of "SHELL=" only happens
-      for Makefiles; if you set $SHELL in the environment or on the
-      Make command line, you are expected to give the complete
-      pathname of the shell, including the filename extension.
-
-      The default value of $SHELL is computed as on Unix (see the Make
-      manual for details), except that if $SHELL is not defined in the
-      environment, $COMSPEC is used.  Also, if an environment variable
-      named $MAKESHELL is defined, it takes precedence over both
-      $COMSPEC and $SHELL.  Note that, unlike Unix, $SHELL in the
-      environment *is* used to set the shell (since on MSDOS, it's
-      unlikely that the interactive shell will not be suitable for
-      Makefile processing).
-
-      The bottom line is that you can now write Makefiles where some
-      of the targets require a real (i.e. Unix-like) shell, which will
-      nevertheless work when such shell is not available (provided, of
-      course, that the commands which should always work, don't
-      require such a shell).  More important, you can convert Unix
-      Makefiles to MSDOS and leave the line which sets the shell
-      intact, so that people who do have Unixy shell could use it for
-      targets which aren't converted to DOS (like `install' and
-      `uninstall', for example).
-
-
-   3. Default directories.
-
-      GNU Make knows about standard directories where it searches for
-      library and include files mentioned in the Makefile.  Since
-      MSDOS machines don't have standard places for these, this port
-      will search ${DJDIR}/lib and ${DJDIR}/include respectively.
-      $DJDIR is defined automatically by the DJGPP startup code as the
-      root of the DJGPP installation tree (unless you've tampered with
-      the DJGPP.ENV file).  This should provide reasonable default
-      values, unless you moved parts of DJGPP to other directories.
-
-
-   4. Letter-case in filenames.
-
-      If you run Make on Windows 9x, you should be aware of the
-      letter-case issue.  Make is internally case-sensitive, but all
-      file operations are case-insensitive on Windows 9x, so
-      e.g. files `FAQ', `faq' and `Faq' all refer to the same file, as
-      far as Windows is concerned.  The underlying DJGPP C library
-      functions honor the letter-case of the filenames they get from
-      the OS, except that by default, they down-case 8+3 DOS filenames
-      which are stored in upper case in the directory and would break
-      many Makefiles otherwise.  (The details of which filenames are
-      converted to lower case are explained in the DJGPP libc docs,
-      under the `_preserve_fncase' and `_lfn_gen_short_fname'
-      functions, but as a thumb rule, any filename that is stored in
-      upper case in the directory, is a valid DOS 8+3 filename and
-      doesn't include characters invalid on MSDOS FAT filesystems,
-      will be automatically down-cased.)  User reports that I have
-      indicate that this default behavior is generally what you'd
-      expect; however, your input is most welcome.
-
-      In any case, if you hit a situation where you must force Make to
-      get the 8+3 DOS filenames in upper case, set FNCASE=y in the
-      environment or in the Makefile.
-
-
-   5. DOS-style pathnames.
-
-      There are a lot of places throughout the program sources which
-      make implicit assumptions about the pathname syntax.  In
-      particular, the directories are assumed to be separated by `/',
-      and any pathname which doesn't begin with a `/' is assumed to be
-      relative to the current directory.  This port attempts to
-      support DOS-style pathnames which might include the drive letter
-      and use backslashes instead of forward slashes.  However, this
-      support is not complete; I feel that pursuing this support too
-      far might break some more important features, particularly if
-      you use a Unix-style shell (where a backslash is a quote
-      character).  I only consider support of backslashes desirable
-      because some Makefiles invoke non-DJGPP programs which don't
-      understand forward slashes.  A notable example of such programs
-      is the standard programs which come with MSDOS.  Otherwise, you
-      are advised to stay away from backslashes whenever possible.  In
-      particular, filename globbing won't work on pathnames with
-      backslashes, because the GNU `glob' library doesn't support them
-      (backslash is special in filename wildcards, and I didn't want
-      to break that).
-
-      One feature which *does* work with backslashes is the filename-
-      related built-in functions such as $(dir), $(notdir), etc.
-      Drive letters in pathnames are also fully supported.
-
-
-
-Bug reports:
------------
-
-   Bugs that are clearly related to the MSDOS/DJGPP port should be
-   reported first on the comp.os.msdos.djgpp news group (if you cannot
-   post to Usenet groups, write to the DJGPP mailing list,
-   <djgpp@delorie.com>, which is an email gateway into the above news
-   group).  For other bugs, please follow the procedure explained in
-   the "Bugs" chapter of the Info docs.  If you don't have an Info
-   reader, look up that chapter in the `make.i1' file with any text
-   browser/editor.
-
-
-   Enjoy,
-			Eli Zaretskii <eliz@is.elta.co.il>

buildtools/windows/source/make-3.79.1/README.MOZILLA

@@ -1,16 +0,0 @@
-This directory contains the source files for the GNU make
-that is used to build some components (e.g., NSPR) on Win32.
-
-This GNU make is based on version 3.79.1. Its default shell
-is shmsdos.exe, a lightweight shell written by Netscape engineers.
-
-To build it, you need Microsoft Visual C++ and nmake.  If
-you want to change the build number, which is displayed by
-the '-v' command line option, you can edit the value of the
-macro BUILD_NUMBER in main.c.  Then, issue the command:
-    nmake /f NMakefile
-The outputs are WinDebug\make.exe and WinRel\make.exe.
-Assuming you want to use the optmized executable file,
-copy WinRel\make.exe to a directory on your Path and
-rename it gmake.exe.
-

buildtools/windows/source/make-3.79.1/README.W32

@@ -1,241 +0,0 @@
-Port of GNU make to Windows NT and Windows 95
-Builds natively with MSVC 2.x or MSVC 4.x compilers.
-Should also build fine with MSVC 5.x and 6.x (though not confirmed).
-
-This Windows 32-bit port of GNU make is maintained primarily by Rob
-Tulloh, who is also the author of this README.
-
-To build with nmake on Windows NT, Windows 95, or Windows 98:
-
-	1. Make sure cl.exe is in your %Path%. Example:
-
-		set Path=%Path%;c:/msdev/bin
-
-	2. Make sure %include% is set to msvc include directory. Example:
-
-		set include=c:/msdev/include
-
-	3. Make sure %lib% is set to msvc lib directory. Example:
-
-		set lib=c:/msdev/lib
-
-	4. nmake /f NMakefile
-
-
-    A short cut to steps 1, 2, and 3 is to run VCVARS32.bat before
-    invoking namke. For example:
-
-        c:
-        cd \msdev\bin
-        VCVARS32.bat
-	cd \path\to\make-3.79.1
-	nmake /f NMakefile
-
-There is a bat file (build_w32.bat) for folks who have fear of nmake.
-
-Outputs:
-
-	WinDebug/make.exe
-	WinRel/make.exe
-
-
--- Notes/Caveats --
-
-GNU make on Windows 32-bit platforms:
-
-	This version of make is ported natively to Windows32 platforms
-	(Windows NT 3.51, Windows NT 4.0, Windows 95, and Windows 98). It
-	does not rely on any 3rd party software or add-on packages for
-	building. The only thing needed is a version of Visual C++,
-	which is the predominant compiler used on Windows32 platforms.
-
-	Do not confuse this port of GNU make with other Windows32 projects
-	which provide a GNU make binary. These are separate projects
-	and are not connected to this port effort.
-
-GNU make and sh.exe:
-
-	This port prefers you have a working sh.exe somewhere on your
-	system. If you don't have sh.exe, the port falls back to
-	MSDOS mode for launching programs (via a batch file).
-	The MSDOS mode style execution has not been tested that
-	carefully though (The author uses GNU bash as sh.exe).
-
-	There are very few true ports of Bourne shell for NT right now.
-	There is a version of GNU bash available from Cygnus "Cygwin"
-	porting effort (http://sourceware.cygnus.com/cygwin).
-	Other possibilities are the MKS version of sh.exe, or building
-        your own with a package like NutCracker (DataFocus) or Portage
-        (Consensys).
-
-GNU make and brain-dead shells (BATCH_MODE_ONLY_SHELL):
-
-	Some versions of Bourne shell does not behave well when invoked
-	as 'sh -c' from CreateProcess().  The main problem is they seem
-	to have a hard time handling quoted strings correctly. This can
-	be circumvented by writing commands to be executed to a batch
-	file and then executing the command by calling 'sh file'.
-
-	To work around this difficulty, this version of make supports
-	a batch mode.  When BATCH_MODE_ONLY_SHELL is defined at compile
-	time, make forces all command lines to be executed via script
-	files instead of by command line.
-
-	A native Windows32 system with no Bourne shell will also run
-	in batch mode.  All command lines will be put into batch files
-	and executed via $(COMSPEC) (%COMSPEC%).
-
-GNU make and Cygnus GNU Windows32 tools:
-
-	Good news! Make now has native support for Cygwin sh. To enable,
-	define the HAVE_CYGWIN_SHELL in config.h and rebuild make
-	from scratch. This version of make tested with B20.1 of Cygwin.
-	Do not define BATCH_MODE_ONLY_SHELL if you use HAVE_CYGWIN_SHELL.
-
-GNU make and the MKS shell:
-
-	There is now semi-official support for the MKS shell. To turn this
-	support on, define HAVE_MKS_SHELL in the config.h.W32 before you
-	build make.  Do not define BATCH_MODE_ONLY_SHELL if you turn
-	on HAVE_MKS_SHELL.
-
-GNU make handling of drive letters in pathnames (PATH, vpath, VPATH):
-
-	There is a caveat that should be noted with respect to handling
-	single character pathnames on Windows systems.	When colon is
-	used in PATH variables, make tries to be smart about knowing when
-	you are using colon as a separator versus colon as a drive
-	letter.	 Unfortunately, something as simple as the string 'x:/'
-	could be interpreted 2 ways: (x and /) or (x:/).
-
-	Make chooses to interpret a letter plus colon (e.g. x:/) as a
-	drive letter pathname.	If it is necessary to use single
-	character directories in paths (VPATH, vpath, Path, PATH), the
-	user must do one of two things:
-
-	 a. Use semicolon as the separator to disambiguate colon. For
-	    example use 'x;/' if you want to say 'x' and '/' are
-	    separate components.
-
-	 b. Qualify the directory name so that there is more than
-	    one character in the path(s) used. For example, none
-	    of these settings are ambiguous:
-
-	      ./x:./y
-	      /some/path/x:/some/path/y
-	      x:/some/path/x:x:/some/path/y
-
-	Please note that you are free to mix colon and semi-colon in the
-	specification of paths.	 Make is able to figure out the intended
-	result and convert the paths internally to the format needed
-	when interacting with the operating system.
-
-	You are encouraged to use colon as the separator character.
-	This should ease the pain of deciding how to handle various path
-	problems which exist between platforms.	 If colon is used on
-	both Unix and Windows systems, then no ifdef'ing will be
-	necessary in the makefile source.
-
-GNU make test suite:
-
-	I verified all functionality with a slightly modified version
-	of make-test-3.79.1 (modifications to get test suite to run
-	on Windows NT). All tests pass in an environment that includes
-	sh.exe.  Tests were performed on both Windows NT and Windows 95.
-
-Building GNU make on Windows NT and Windows 95/98 with Microsoft Visual C:
-
-	I did not provide a Visual C project file with this port as
-	the project file would not be considered freely distributable
-	(or so I think). It is easy enough to create one, though, if
-	you know how to use Visual C.
-
-	I build the program statically to avoid problems locating DLL's
-	on machines that may not have MSVC runtime installed. If you
-	prefer, you can change make to build with shared libraries by
-	changing /MT to /MD in the NMakefile (or in build_w32.bat).
-
-	The program has not been built for non-Intel architectures (yet).
-
-	I have not tried to build with any other compilers than MSVC. I
-	have heard that this is possible though so don't be afraid to
-	notify me of your successes!
-
-Pathnames and white space:
-
-	Unlike Unix, Windows 95/NT systems encourage pathnames which
-	contain white space (e.g. C:\Program Files\). These sorts of pathnames
-	are legal under Unix too, but are never encouraged. There is
-	at least one place in make (VPATH/vpath handling) where paths
-	containing white space will simply not work. There may be others
-	too. I chose to not try and port make in such a way so that
-	these sorts of paths could be handled. I offer these suggestions
-	as workarounds:
-
-		1. Use 8.3 notation
-		2. Rename the directory so it does not contain white space.
-
-	If you are unhappy with this choice, this is free software
-	and you are free to take a crack at making this work. The code
-	in w32/pathstuff.c and vpath.c would be the places to start.
-
-Pathnames and Case insensitivity:
-
-	Unlike Unix, Windows 95/NT systems are case insensitive but case
-	preserving.  For example if you tell the file system to create a
-	file named "Target", it will preserve the case.  Subsequent access to
-	the file with other case permutations will succeed (i.e. opening a
-	file named "target" or "TARGET" will open the file "Target").
-
-	By default, GNU make retains its case sensitivity when comparing
-	target names and existing files or directories.  It can be
-	configured, however, into a case preserving and case insensitive
-	mode by adding a define for HAVE_CASE_INSENSITIVE_FS to
-	config.h.W32.
-
-	For example, the following makefile will create a file named
-	Target in the directory subdir which will subsequently be used
-	to satisfy the dependency of SUBDIR/DepTarget on SubDir/TARGET.
-	Without HAVE_CASE_INSENSITIVE_FS configured, the dependency link
-	will not be made:
-
-	subdir/Target:
-		touch $@
-
-	SUBDIR/DepTarget: SubDir/TARGET
-		cp $^ $@
-
-	Reliance on this behavior also eliminates the ability of GNU make
-	to use case in comparison of matching rules.  For example, it is
-	not possible to set up a C++ rule using %.C that is different
-	than a C rule using %.c.  GNU make will consider these to be the
-	same rule and will issue a warning.
-
-SAMBA/NTFS/VFAT:
-
-	I have not had any success building the debug version of this
-	package using SAMBA as my file server. The reason seems to be
-	related to the way VC++ 4.0 changes the case name of the pdb
-	filename it is passed on the command line. It seems to change
-	the name always to to lower case. I contend that
-	the VC++ compiler should not change the casename of files that
-	are passed as arguments on the command line. I don't think this
-	was a problem in MSVC 2.x, but I know it is a problem in MSVC 4.x.
-
-	The package builds fine on VFAT and NTFS filesystems.
-
-	Most all of the development I have done to date has been using
-	NTFS and long file names. I have not done any considerable work
-	under VFAT. VFAT users may wish to be aware that this port
-	of make does respect case sensitivity.
-
-FAT:
-
-	Version 3.76 added support for FAT filesystems. Make
-	works around some difficulties with stat'ing of
-	files and caching of filenames and directories internally.
-
-Bug reports:
-
-	Please submit bugs via the normal bug reporting mechanism which
-	is described in the GNU make manual and the base README.

buildtools/windows/source/make-3.79.1/README.customs

@@ -1,95 +0,0 @@
-                                                            -*-indented-text-*-
-
-GNU make can utilize the Customs library, distributed with Pmake, to
-provide builds distributed across multiple hosts.
-
-In order to utilize this capability, you must first download and build
-the Customs library.  It is contained in the Pmake distribution, which
-can be obtained at:
-
-  ftp://ftp.icsi.berkeley.edu/pub/ai/stolcke/software/
-
-This integration was tested (superficially) with Pmake 2.1.33.
-
-
-BUILDING CUSTOMS
-----------------
-
-First, build pmake and Customs.  You need to build pmake first, because
-Customs require pmake to build.  Unfortunately, this is not trivial;
-please see the pmake and Customs documentation for details.  The best
-place to look for instructions is in the pmake-2.1.33/INSTALL file.
-
-Note that the 2.1.33 Pmake distribution comes with a set of patches to
-GNU make, distributed in the pmake-2.1.33/etc/gnumake/ directory.  These
-patches are based on GNU make 3.75 (there are patches for earlier
-versions of GNU make, also).  The parts of this patchfile which relate
-directly to Customs support have already been incorporated into this
-version of GNU make, so you should _NOT_ apply the patch file.
-
-However, there are a few non-Customs specific (as far as I could tell)
-changes here which are not incorporated (for example, the modification
-to try expanding -lfoo to libfoo.so).  If you rely on these changes
-you'll need to re-apply them by hand.
-
-Install the Customs library and header files according to the
-documentation.  You should also install the man pages (contrary to
-comments in the documentation, they weren't installed automatically for
-me; I had to cd to the ``pmake-2.1.33/doc'' directory and run ``pmake
-install'' there directly).
-
-
-BUILDING GNU MAKE
------------------
-
-Once you've installed Customs, you can build GNU make to use it.  When
-configuring GNU make, merely use the ``--with-customs=DIR'' option.
-Provide the directory containing the ``lib'' and ``include/customs''
-subdirectories as DIR.  For example, if you installed the customs
-library in /usr/local/lib and the headers in /usr/local/include/customs,
-then you'd pass ``--with-customs=/usr/local'' as an option to configure.
-
-Run make (or use build.sh) normally to build GNU make as described in
-the INSTALL file.
-
-See the documentation for Customs for information on starting and
-configuring Customs.
-
-
-INVOKING CUSTOMS-IZED GNU MAKE
------------------------------
-
-One thing you should be aware of is that the default build environment
-for Customs requires root permissions.  Practically, this means that GNU
-make must be installed setuid root to use Customs.
-
-If you don't want to do this, you can build Customs such that root
-permissions are not necessary.  Andreas Stolcke <stolcke@speech.sri.com>
-writes:
-
- > pmake, gnumake or any other customs client program is not required to
- > be suid root if customs was compiled WITHOUT the USE_RESERVED_PORTS
- > option in customs/config.h.  Make sure the "customs" service in
- > /etc/services is defined accordingly (port 8231 instead of 1001).
-
- > Not using USE_RESERVED_PORTS means that a user with programming
- > skills could impersonate another user by writing a fake customs
- > client that pretends to be someone other than himself.  See the
- > discussion in etc/SECURITY.
-
-
-PROBLEMS
---------
-
-SunOS 4.1.x:
-  The customs/sprite.h header file #includes the <malloc.h> header
-  files; this conflicts with GNU make's configuration so you'll get a
-  compile error if you use GCC (or any other ANSI-capable C compiler).
-
-  I commented out the #include in sprite.h:107:
-
-    #if defined(sun) || defined(ultrix) || defined(hpux) || defined(sgi)
-    /* #include <malloc.h> */
-    #else
-
-  YMMV.

buildtools/windows/source/make-3.79.1/SCOPTIONS

@@ -1,13 +0,0 @@
-ERRORREXX
-OPTIMIZE
-NOVERSION
-OPTIMIZERTIME
-OPTIMIZERALIAS
-DEFINE INCLUDEDIR="include:"
-DEFINE LIBDIR="lib:"
-DEFINE NO_ALLOCA
-DEFINE NO_FLOAT
-DEFINE NO_ARCHIVES
-IGNORE=161
-IGNORE=100
-STARTUP=cres

buildtools/windows/source/make-3.79.1/SMakefile

@@ -1,255 +0,0 @@
-# NOTE: If you have no `make' program at all to process this makefile, run
-# `build.sh' instead.
-#
-# Copyright (C) 1988, 89, 91, 92, 93, 94, 1995 Free Software Foundation, Inc.
-# This file is part of GNU Make.
-#
-# GNU Make is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# GNU Make is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Make; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-#
-#	Makefile for GNU Make
-#
-
-# Ultrix 2.2 make doesn't expand the value of VPATH.
-VPATH = /make-3.79.1/
-# This must repeat the value, because configure will remove `VPATH = .'.
-srcdir = /make-3.79.1/
-
-CC = sc
-RM = delete
-MAKE = smake
-
-CFLAGS =
-CPPFLAGS =
-LDFLAGS =
-
-# Define these for your system as follows:
-#	-DNO_ARCHIVES		To disable `ar' archive support.
-#	-DNO_FLOAT		To avoid using floating-point numbers.
-#	-DENUM_BITFIELDS	If the compiler isn't GCC but groks enum foo:2.
-#				Some compilers apparently accept this
-#				without complaint but produce losing code,
-#				so beware.
-# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
-# See also `config.h'.
-defines =
-
-# Which flavor of remote job execution support to use.
-# The code is found in `remote-$(REMOTE).c'.
-REMOTE = stub
-
-# If you are using the GNU C library, or have the GNU getopt functions in
-# your C library, you can comment these out.
-GETOPT = getopt.o getopt1.o
-GETOPT_SRC = $(srcdir)getopt.c $(srcdir)getopt1.c $(srcdir)getopt.h
-
-# If you are using the GNU C library, or have the GNU glob functions in
-# your C library, you can comment this out.  GNU make uses special hooks
-# into the glob functions to be more efficient (by using make's directory
-# cache for globbing), so you must use the GNU functions even if your
-# system's C library has the 1003.2 glob functions already.  Also, the glob
-# functions in the AIX and HPUX C libraries are said to be buggy.
-GLOB = Lib glob/glob.lib
-
-# If your system doesn't have alloca, or the one provided is bad, define this.
-ALLOCA = alloca.o
-ALLOCA_SRC = $(srcdir)alloca.c
-
-# If your system needs extra libraries loaded in, define them here.
-# System V probably need -lPW for alloca.  HP-UX 7.0's alloca in
-# libPW.a is broken on HP9000s300 and HP9000s400 machines.  Use
-# alloca.c instead on those machines.
-LOADLIBES =
-
-# Any extra object files your system needs.
-extras = amiga.o
-
-# Common prefix for machine-independent installed files.
-prefix =
-# Common prefix for machine-dependent installed files.
-exec_prefix =
-
-# Directory to install `make' in.
-bindir = sc:c
-# Directory to find libraries in for `-lXXX'.
-libdir = lib:
-# Directory to search by default for included makefiles.
-includedir = include:
-# Directory to install the Info files in.
-infodir = doc:
-# Directory to install the man page in.
-mandir = t:
-# Number to put on the man page filename.
-manext = 1
-# Prefix to put on installed `make' binary file name.
-binprefix =
-# Prefix to put on installed `make' man page file name.
-manprefix = $(binprefix)
-
-# Whether or not make needs to be installed setgid.
-# The value should be either `true' or `false'.
-# On many systems, the getloadavg function (used to implement the `-l'
-# switch) will not work unless make is installed setgid kmem.
-install_setgid = false
-# Install make setgid to this group so it can read /dev/kmem.
-group = sys
-
-# Program to install `make'.
-INSTALL_PROGRAM = copy
-# Program to install the man page.
-INSTALL_DATA = copy
-# Generic install program.
-INSTALL = copy
-
-# Program to format Texinfo source into Info files.
-MAKEINFO = makeinfo
-# Program to format Texinfo source into DVI files.
-TEXI2DVI = texi2dvi
-
-# Programs to make tags files.
-ETAGS = etags -w
-CTAGS = ctags -w
-
-objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o	\
-       rule.o implicit.o default.o variable.o expand.o function.o	\
-       vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o     \
-       $(GLOB) $(GETOPT) $(ALLOCA) $(extras)
-srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c             \
-       $(srcdir)file.c $(srcdir)getloadavg.c $(srcdir)misc.c         \
-       $(srcdir)main.c $(srcdir)read.c $(srcdir)remake.c             \
-       $(srcdir)rule.c $(srcdir)implicit.c $(srcdir)default.c        \
-       $(srcdir)variable.c $(srcdir)expand.c $(srcdir)function.c     \
-       $(srcdir)vpath.c $(srcdir)version.c                            \
-       $(srcdir)remote-$(REMOTE).c                                     \
-       $(srcdir)ar.c $(srcdir)arscan.c                                \
-       $(srcdir)signame.c $(srcdir)signame.h $(GETOPT_SRC)            \
-       $(srcdir)commands.h $(srcdir)dep.h $(srcdir)file.h            \
-       $(srcdir)job.h $(srcdir)make.h $(srcdir)rule.h                \
-       $(srcdir)variable.h $(ALLOCA_SRC) $(srcdir)config.h.in
-
-
-.SUFFIXES:
-.SUFFIXES: .o .c .h .ps .dvi .info .texinfo
-
-all: make
-info: make.info
-dvi: make.dvi
-# Some makes apparently use .PHONY as the default goal if it is before `all'.
-.PHONY: all check info dvi
-
-make.info: make.texinfo
-	$(MAKEINFO) -I$(srcdir) $(srcdir)make.texinfo -o make.info
-
-make.dvi: make.texinfo
-	$(TEXI2DVI) $(srcdir)make.texinfo
-
-make.ps: make.dvi
-	dvi2ps make.dvi > make.ps
-
-make: $(objs) glob/glob.lib
-	$(CC) Link $(LDFLAGS) $(objs) $(LOADLIBES) To make.new
-	-delete quiet make
-	rename make.new make
-
-# -I. is needed to find config.h in the build directory.
-.c.o:
-	$(CC) $(defines) IDir "" IDir $(srcdir)glob \
-	      $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
-
-glob/glob.lib:
-	execute <<
-	    cd glob
-	    smake
-<
-
-tagsrcs = $(srcs) $(srcdir)remote-*.c
-TAGS: $(tagsrcs)
-	$(ETAGS) $(tagsrcs)
-tags: $(tagsrcs)
-	$(CTAGS) $(tagsrcs)
-
-.PHONY: install installdirs
-install:
-	copy make sc:c
-
-loadavg: loadavg.c config.h
-	$(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
-	      loadavg.c $(LOADLIBES) -o $@
-
-clean: glob-clean
-	-$(RM) -f make loadavg *.o core make.dvi
-
-distclean: clean glob-realclean
-	-$(RM) -f Makefile config.h config.status build.sh
-	-$(RM) -f config.log config.cache
-	-$(RM) -f TAGS tags
-	-$(RM) -f make.?? make.??s make.log make.toc make.*aux
-	-$(RM) -f loadavg.c
-
-realclean: distclean
-	-$(RM) -f make.info*
-
-mostlyclean: clean
-
-.PHONY: glob-clean glob-realclean
-
-glob-clean glob-realclean:
-	execute <<
-	cd glob
-	smake $@
-<
-
-# --------------- DEPENDENCIES
-#
-alloca.o: alloca.c config.h
-ar.o: ar.c make.h config.h gettext.h filedef.h dep.h glob/fnmatch.h
-arscan.o: arscan.c make.h config.h gettext.h
-commands.o: commands.c make.h config.h gettext.h dep.h filedef.h \
-	variable.h job.h commands.h
-default.o: default.c make.h config.h gettext.h rule.h dep.h filedef.h \
-	job.h commands.h variable.h
-dir.o: dir.c make.h config.h gettext.h glob/glob.h
-expand.o: expand.c make.h config.h gettext.h filedef.h job.h commands.h \
-	variable.h rule.h
-file.o: file.c make.h config.h gettext.h dep.h filedef.h job.h \
-	commands.h variable.h
-function.o: function.c make.h config.h gettext.h filedef.h variable.h \
-	dep.h job.h commands.h debug.h
-getloadavg.o: getloadavg.c config.h
-getopt.o: getopt.c config.h gettext.h getopt.h
-getopt1.o: getopt1.c config.h getopt.h
-gettext.o: gettext.c config.h gettext.h
-implicit.o: implicit.c make.h config.h gettext.h rule.h dep.h filedef.h \
-	debug.h
-job.o: job.c make.h config.h gettext.h job.h debug.h filedef.h \
-	commands.h variable.h
-main.o: main.c make.h config.h gettext.h dep.h filedef.h variable.h \
-	job.h commands.h rule.h debug.h getopt.h
-misc.o: misc.c make.h config.h gettext.h dep.h debug.h
-read.o: read.c make.h config.h gettext.h glob/glob.h dep.h filedef.h \
-	job.h commands.h variable.h rule.h debug.h
-remake.o: remake.c make.h config.h gettext.h filedef.h job.h commands.h \
-	dep.h variable.h debug.h
-remote-stub.o: remote-stub.c make.h config.h gettext.h filedef.h job.h \
-	commands.h
-rule.o: rule.c make.h config.h gettext.h dep.h filedef.h job.h \
-	commands.h variable.h rule.h
-signame.o: signame.c make.h config.h gettext.h signame.h
-variable.o: variable.c make.h config.h gettext.h dep.h filedef.h job.h \
-	commands.h variable.h rule.h
-version.o: version.c config.h
-vpath.o: vpath.c make.h config.h gettext.h filedef.h variable.h
-

buildtools/windows/source/make-3.79.1/acconfig.h

@@ -1,28 +0,0 @@
-/* Name of this package (needed by automake) */
-#undef PACKAGE
-
-/* Version of this package (needed by automake) */
-#undef VERSION
-
-/* Define if your locale.h file contains LC_MESSAGES.  */
-#undef HAVE_LC_MESSAGES
-
-/* Define to the installation directory for locales.  */
-#undef LOCALEDIR
-
-/* Define to the name of the SCCS `get' command.  */
-#undef SCCS_GET
-
-/* Define to be the nanoseconds member of struct stat's st_mtim,
-   if it exists.  */
-#undef ST_MTIM_NSEC
-
-/* Define this if the C library defines the variable `sys_siglist'.  */
-#undef HAVE_SYS_SIGLIST
-
-/* Define this if the C library defines the variable `_sys_siglist'.  */
-#undef HAVE__SYS_SIGLIST
-
-/* Define to `unsigned long' or `unsigned long long'
-   if <inttypes.h> doesn't define.  */
-#undef uintmax_t

buildtools/windows/source/make-3.79.1/acinclude.m4

@@ -1,536 +0,0 @@
-dnl acinclude.m4 -- Extra macros needed for GNU make.
-dnl
-dnl Automake will incorporate this into its generated aclocal.m4.
-
-dnl ---------------------------------------------------------------------------
-dnl Got this from the lynx 2.8 distribution.
-dnl by T.E.Dickey <dickey@clark.net>
-dnl and Jim Spath <jspath@mail.bcpl.lib.md.us>
-dnl and Philippe De Muyter <phdm@macqel.be>
-dnl
-dnl Created: 1997/1/28
-dnl Updated: 1997/12/23
-dnl ---------------------------------------------------------------------------
-dnl After checking for functions in the default $LIBS, make a further check
-dnl for the functions that are netlib-related (these aren't always in the
-dnl libc, etc., and have to be handled specially because there are conflicting
-dnl and broken implementations.
-dnl Common library requirements (in order):
-dnl	-lresolv -lsocket -lnsl
-dnl	-lnsl -lsocket
-dnl	-lsocket
-dnl	-lbsd
-AC_DEFUN([CF_NETLIBS],[
-cf_test_netlibs=no
-AC_MSG_CHECKING(for network libraries)
-AC_CACHE_VAL(cf_cv_netlibs,[
-AC_MSG_RESULT(working...)
-cf_cv_netlibs=""
-cf_test_netlibs=yes
-AC_CHECK_FUNCS(gethostname,,[
-	CF_RECHECK_FUNC(gethostname,nsl,cf_cv_netlibs,[
-		CF_RECHECK_FUNC(gethostname,socket,cf_cv_netlibs)])])
-#
-# FIXME:  sequent needs this library (i.e., -lsocket -linet -lnsl), but
-# I don't know the entrypoints - 97/7/22 TD
-AC_CHECK_LIB(inet,main,cf_cv_netlibs="-linet $cf_cv_netlibs")
-#
-if test "$ac_cv_func_lsocket" != no ; then
-AC_CHECK_FUNCS(socket,,[
-	CF_RECHECK_FUNC(socket,socket,cf_cv_netlibs,[
-		CF_RECHECK_FUNC(socket,bsd,cf_cv_netlibs)])])
-fi
-#
-AC_CHECK_FUNCS(gethostbyname,,[
-	CF_RECHECK_FUNC(gethostbyname,nsl,cf_cv_netlibs)])
-#
-AC_CHECK_FUNCS(strcasecmp,,[
-	CF_RECHECK_FUNC(strcasecmp,resolv,cf_cv_netlibs)])
-])
-LIBS="$LIBS $cf_cv_netlibs"
-test $cf_test_netlibs = no && echo "$cf_cv_netlibs" >&AC_FD_MSG
-])dnl
-dnl ---------------------------------------------------------------------------
-dnl Re-check on a function to see if we can pick it up by adding a library.
-dnl	$1 = function to check
-dnl	$2 = library to check in
-dnl	$3 = environment to update (e.g., $LIBS)
-dnl	$4 = what to do if this fails
-dnl
-dnl This uses 'unset' if the shell happens to support it, but leaves the
-dnl configuration variable set to 'unknown' if not.  This is a little better
-dnl than the normal autoconf test, which gives misleading results if a test
-dnl for the function is made (e.g., with AC_CHECK_FUNC) after this macro is
-dnl used (autoconf does not distinguish between a null token and one that is
-dnl set to 'no').
-AC_DEFUN([CF_RECHECK_FUNC],[
-AC_CHECK_LIB($2,$1,[
-	CF_UPPER(cf_tr_func,$1)
-	AC_DEFINE_UNQUOTED(HAVE_$cf_tr_func)
-	ac_cv_func_$1=yes
-	$3="-l$2 [$]$3"],[
-	ac_cv_func_$1=unknown
-	unset ac_cv_func_$1 2>/dev/null
-	$4],
-	[[$]$3])
-])dnl
-dnl ---------------------------------------------------------------------------
-dnl Make an uppercase version of a variable
-dnl $1=uppercase($2)
-AC_DEFUN([CF_UPPER],
-[
-changequote(,)dnl
-$1=`echo $2 | tr '[a-z]' '[A-Z]'`
-changequote([,])dnl
-])dnl
-
-dnl ---------------------------------------------------------------------------
-dnl Got this from the GNU tar 1.13.11 distribution
-dnl by Paul Eggert <eggert@twinsun.com>
-dnl ---------------------------------------------------------------------------
-
-dnl By default, many hosts won't let programs access large files;
-dnl one must use special compiler options to get large-file access to work.
-dnl For more details about this brain damage please see:
-dnl http://www.sas.com/standards/large.file/x_open.20Mar96.html
-
-dnl Written by Paul Eggert <eggert@twinsun.com>.
-
-dnl Internal subroutine of AC_SYS_LARGEFILE.
-dnl AC_SYS_LARGEFILE_FLAGS(FLAGSNAME)
-AC_DEFUN(AC_SYS_LARGEFILE_FLAGS,
-  [AC_CACHE_CHECK([for $1 value to request large file support],
-     ac_cv_sys_largefile_$1,
-     [if ($GETCONF LFS_$1) >conftest.1 2>conftest.2 && test ! -s conftest.2
-      then
-        ac_cv_sys_largefile_$1=`cat conftest.1`
-      else
-	ac_cv_sys_largefile_$1=no
-	ifelse($1, CFLAGS,
-	  [case "$host_os" in
-	   # HP-UX 10.20 requires -D__STDC_EXT__ with gcc 2.95.1.
-changequote(, )dnl
-	   hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
-changequote([, ])dnl
-	     if test "$GCC" = yes; then
-	       ac_cv_sys_largefile_CFLAGS=-D__STDC_EXT__
-	     fi
-	     ;;
-	   # IRIX 6.2 and later require cc -n32.
-changequote(, )dnl
-	   irix6.[2-9]* | irix6.1[0-9]* | irix[7-9].* | irix[1-9][0-9]*)
-changequote([, ])dnl
-	     if test "$GCC" != yes; then
-	       ac_cv_sys_largefile_CFLAGS=-n32
-	     fi
-	   esac
-	   if test "$ac_cv_sys_largefile_CFLAGS" != no; then
-	     ac_save_CC="$CC"
-	     CC="$CC $ac_cv_sys_largefile_CFLAGS"
-	     AC_TRY_LINK(, , , ac_cv_sys_largefile_CFLAGS=no)
-	     CC="$ac_save_CC"
-	   fi])
-      fi
-      rm -f conftest*])])
-
-dnl Internal subroutine of AC_SYS_LARGEFILE.
-dnl AC_SYS_LARGEFILE_SPACE_APPEND(VAR, VAL)
-AC_DEFUN(AC_SYS_LARGEFILE_SPACE_APPEND,
-  [case $2 in
-   no) ;;
-   ?*)
-     case "[$]$1" in
-     '') $1=$2 ;;
-     *) $1=[$]$1' '$2 ;;
-     esac ;;
-   esac])
-
-dnl Internal subroutine of AC_SYS_LARGEFILE.
-dnl AC_SYS_LARGEFILE_MACRO_VALUE(C-MACRO, CACHE-VAR, COMMENT, CODE-TO-SET-DEFAULT)
-AC_DEFUN(AC_SYS_LARGEFILE_MACRO_VALUE,
-  [AC_CACHE_CHECK([for $1], $2,
-     [$2=no
-changequote(, )dnl
-      $4
-      for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
-	case "$ac_flag" in
-	-D$1)
-	  $2=1 ;;
-	-D$1=*)
-	  $2=`expr " $ac_flag" : '[^=]*=\(.*\)'` ;;
-	esac
-      done
-changequote([, ])dnl
-      ])
-   if test "[$]$2" != no; then
-     AC_DEFINE_UNQUOTED([$1], [$]$2, [$3])
-   fi])
-
-AC_DEFUN(AC_SYS_LARGEFILE,
-  [AC_REQUIRE([AC_CANONICAL_HOST])
-   AC_ARG_ENABLE(largefile,
-     [  --disable-largefile     omit support for large files])
-   if test "$enable_largefile" != no; then
-     AC_CHECK_TOOL(GETCONF, getconf)
-     AC_SYS_LARGEFILE_FLAGS(CFLAGS)
-     AC_SYS_LARGEFILE_FLAGS(LDFLAGS)
-     AC_SYS_LARGEFILE_FLAGS(LIBS)
-
-     for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
-       case "$ac_flag" in
-       no) ;;
-       -D_FILE_OFFSET_BITS=*) ;;
-       -D_LARGEFILE_SOURCE | -D_LARGEFILE_SOURCE=*) ;;
-       -D_LARGE_FILES | -D_LARGE_FILES=*) ;;
-       -D?* | -I?*)
-	 AC_SYS_LARGEFILE_SPACE_APPEND(CPPFLAGS, "$ac_flag") ;;
-       *)
-	 AC_SYS_LARGEFILE_SPACE_APPEND(CFLAGS, "$ac_flag") ;;
-       esac
-     done
-     AC_SYS_LARGEFILE_SPACE_APPEND(LDFLAGS, "$ac_cv_sys_largefile_LDFLAGS")
-     AC_SYS_LARGEFILE_SPACE_APPEND(LIBS, "$ac_cv_sys_largefile_LIBS")
-     AC_SYS_LARGEFILE_MACRO_VALUE(_FILE_OFFSET_BITS,
-       ac_cv_sys_file_offset_bits,
-       [Number of bits in a file offset, on hosts where this is settable.],
-       [case "$host_os" in
-	# HP-UX 10.20 and later
-	hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
-	  ac_cv_sys_file_offset_bits=64 ;;
-	esac])
-     AC_SYS_LARGEFILE_MACRO_VALUE(_LARGEFILE_SOURCE,
-       ac_cv_sys_largefile_source,
-       [Define to make fseeko etc. visible, on some hosts.],
-       [case "$host_os" in
-	# HP-UX 10.20 and later
-	hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
-	  ac_cv_sys_largefile_source=1 ;;
-	esac])
-     AC_SYS_LARGEFILE_MACRO_VALUE(_LARGE_FILES,
-       ac_cv_sys_large_files,
-       [Define for large files, on AIX-style hosts.],
-       [case "$host_os" in
-	# AIX 4.2 and later
-	aix4.[2-9]* | aix4.1[0-9]* | aix[5-9].* | aix[1-9][0-9]*)
-	  ac_cv_sys_large_files=1 ;;
-	esac])
-   fi
-  ])
-
-
-dnl ---------------------------------------------------------------------------
-dnl From Paul Eggert <eggert@twinsun.com>
-
-dnl Define HAVE_INTTYPES_H if <inttypes.h> exists,
-dnl doesn't clash with <sys/types.h>, and declares uintmax_t.
-
-AC_DEFUN(jm_AC_HEADER_INTTYPES_H,
-[
-  if test x = y; then
-    dnl This code is deliberately never run via ./configure.
-    dnl FIXME: this is a gross hack to make autoheader put an entry
-    dnl for `HAVE_INTTYPES_H' in config.h.in.
-    AC_CHECK_FUNCS(INTTYPES_H)
-  fi
-  AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
-  [AC_TRY_COMPILE(
-    [#include <sys/types.h>
-#include <inttypes.h>],
-    [uintmax_t i = (uintmax_t) -1;],
-    jm_ac_cv_header_inttypes_h=yes,
-    jm_ac_cv_header_inttypes_h=no)])
-  if test $jm_ac_cv_header_inttypes_h = yes; then
-    ac_kludge=HAVE_INTTYPES_H
-    AC_DEFINE_UNQUOTED($ac_kludge)
-  fi
-])
-
-
-dnl ---------------------------------------------------------------------------
-dnl From Paul Eggert <eggert@twinsun.com>
-
-AC_DEFUN(AC_STRUCT_ST_MTIM_NSEC,
- [AC_CACHE_CHECK([for nanoseconds member of struct stat.st_mtim],
-   ac_cv_struct_st_mtim_nsec,
-   [ac_save_CPPFLAGS="$CPPFLAGS"
-    ac_cv_struct_st_mtim_nsec=no
-    # tv_nsec -- the usual case
-    # _tv_nsec -- Solaris 2.6, if
-    #	(defined _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED == 1
-    #	 && !defined __EXTENSIONS__)
-    # st__tim.tv_nsec -- UnixWare 2.1.2
-    for ac_val in tv_nsec _tv_nsec st__tim.tv_nsec; do
-      CPPFLAGS="$ac_save_CPPFLAGS -DST_MTIM_NSEC=$ac_val"
-      AC_TRY_COMPILE([#include <sys/types.h>
-#include <sys/stat.h>], [struct stat s; s.st_mtim.ST_MTIM_NSEC;],
-        [ac_cv_struct_st_mtim_nsec=$ac_val; break])
-    done
-    CPPFLAGS="$ac_save_CPPFLAGS"])
-
-  if test $ac_cv_struct_st_mtim_nsec != no; then
-    AC_DEFINE_UNQUOTED(ST_MTIM_NSEC, $ac_cv_struct_st_mtim_nsec)
-  fi
- ]
-)
-
-dnl ---------------------------------------------------------------------------
-dnl From Paul Eggert <eggert@twinsun.com>
-
-dnl Define uintmax_t to `unsigned long' or `unsigned long long'
-dnl if <inttypes.h> does not exist.
-
-AC_DEFUN(jm_AC_TYPE_UINTMAX_T,
-[
-  AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
-  if test $jm_ac_cv_header_inttypes_h = no; then
-    AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long,
-    [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;],
-      [unsigned long long ullmax = (unsigned long long) -1;
-       return ull << i | ull >> i | ullmax / ull | ullmax % ull;],
-      ac_cv_type_unsigned_long_long=yes,
-      ac_cv_type_unsigned_long_long=no)])
-    if test $ac_cv_type_unsigned_long_long = yes; then
-      AC_DEFINE(uintmax_t, unsigned long long)
-    else
-      AC_DEFINE(uintmax_t, unsigned long)
-    fi
-  fi
-])
-
-
-# The following is taken from automake 1.4,
-# except that it prefers the compiler option -Ae to "-Aa -D_HPUX_SOURCE"
-# because only the former supports 64-bit integral types on HP-UX 10.20.
-
-## ----------------------------------------- ##
-## ANSIfy the C compiler whenever possible.  ##
-## From Franc,ois Pinard                     ##
-## ----------------------------------------- ##
-
-# serial 2
-
-# @defmac AC_PROG_CC_STDC
-# @maindex PROG_CC_STDC
-# @ovindex CC
-# If the C compiler in not in ANSI C mode by default, try to add an option
-# to output variable @code{CC} to make it so.  This macro tries various
-# options that select ANSI C on some system or another.  It considers the
-# compiler to be in ANSI C mode if it handles function prototypes correctly.
-#
-# If you use this macro, you should check after calling it whether the C
-# compiler has been set to accept ANSI C; if not, the shell variable
-# @code{am_cv_prog_cc_stdc} is set to @samp{no}.  If you wrote your source
-# code in ANSI C, you can make an un-ANSIfied copy of it by using the
-# program @code{ansi2knr}, which comes with Ghostscript.
-# @end defmac
-
-AC_DEFUN(AM_PROG_CC_STDC,
-[AC_REQUIRE([AC_PROG_CC])
-AC_BEFORE([$0], [AC_C_INLINE])
-AC_BEFORE([$0], [AC_C_CONST])
-dnl Force this before AC_PROG_CPP.  Some cpp's, eg on HPUX, require
-dnl a magic option to avoid problems with ANSI preprocessor commands
-dnl like #elif.
-dnl FIXME: can't do this because then AC_AIX won't work due to a
-dnl circular dependency.
-dnl AC_BEFORE([$0], [AC_PROG_CPP])
-AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C)
-AC_CACHE_VAL(am_cv_prog_cc_stdc,
-[am_cv_prog_cc_stdc=no
-ac_save_CC="$CC"
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX			-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  AC_TRY_COMPILE(
-[#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-], [
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-],
-[am_cv_prog_cc_stdc="$ac_arg"; break])
-done
-CC="$ac_save_CC"
-])
-if test -z "$am_cv_prog_cc_stdc"; then
-  AC_MSG_RESULT([none needed])
-else
-  AC_MSG_RESULT($am_cv_prog_cc_stdc)
-fi
-case "x$am_cv_prog_cc_stdc" in
-  x|xno) ;;
-  *) CC="$CC $am_cv_prog_cc_stdc" ;;
-esac
-])
-
-dnl ---------------------------------------------------------------------------
-dnl Enable internationalization support for GNU make.
-dnl Original obtained from the libit 0.7 distribution
-dnl Rewritten by Paul D. Smith <psmith@gnu.org>
-dnl This version is much more straightforward than the original (I think);
-dnl If the user doesn't disable NLS, check whether she asked for the
-dnl included gettext.  If so, we use that.  If not, test to see if the
-dnl system gettext is GNU.  If not, use the included gettext.  If so,
-dnl use the system gettext.  We are very strict about testing for GNU
-dnl gettext; not only must the library be GNU gettext, but the libintl.h
-dnl file must also be GNU.
-dnl
-AC_DEFUN(pds_CHECK_SYSTEM_GETTEXT, [
-
-  # OK.  What we're going to do is see if the system gettext is really
-  # GNU gettext, and we're going to make _sure_ (as we can) that if
-  # it's not we'll use the included gettext.
-
-  pds_keep_LIBS="$LIBS"
-
-  # Look around for gettext() and libintl.h on the system
-  AC_CHECK_HEADERS(locale.h)
-  AC_SEARCH_LIBS(gettext, intl)
-  if test "$ac_cv_search_gettext" = no; then
-    with_included_gettext=yes
-
-  else
-    # We only want to deal with GNU's gettext; if we don't have that
-    # we'll just use our own, thanks very much.
-    AC_CACHE_CHECK([whether the system has GNU gettext],
-                   pds_cv_system_gnu_gettext, [
-      AC_TRY_LINK([
-#include <libintl.h>
-#ifdef HAVE_LOCALE_H
-#include <locale.h>
-#endif
-], [
-#if __USE_GNU_GETTEXT
-  extern int _nl_msg_cat_cntr;
-  return _nl_msg_cat_cntr;
-#else
-not GNU gettext
-#endif
-],
-	pds_cv_system_gnu_gettext=yes, pds_cv_system_gnu_gettext=no)])
-
-    if test "x$pds_cv_system_gnu_gettext" = xyes; then
-      with_included_gettext=no
-      AC_DEFINE(HAVE_LIBINTL_H, 1, [Define if you have <libintl.h>.])
-    else
-      with_included_gettext=yes
-      LIBS="$pds_keep_LIBS"
-    fi
-  fi
-])
-
-
-AC_DEFUN(pds_WITH_GETTEXT, [
-
-  AC_MSG_CHECKING(whether NLS is wanted)
-  AC_ARG_ENABLE(nls,
-    [  --disable-nls           disallow Native Language Support],
-    enable_nls=$enableval, enable_nls=yes)
-  AC_MSG_RESULT($enable_nls)
-  use_nls=$enable_nls
-  AM_CONDITIONAL(USE_NLS, test $use_nls = yes)
-
-  if test $enable_nls = yes; then
-    AC_DEFINE(ENABLE_NLS, 1, [Define if NLS is requested.])
-
-    # We don't support catgets at all
-    if test "x$with_catgets" != x; then
-      AC_MSG_WARN([catgets not supported; --with-catgets ignored])
-    fi
-
-    # Find out what the user wants.
-
-    AC_ARG_WITH(included-gettext,
-      [  --with-included-gettext use the GNU gettext library included here],
-      with_included_gettext=yes,
-      with_included_gettext=maybe)
-
-    if test "x$with_included_gettext" != xyes; then
-      pds_CHECK_SYSTEM_GETTEXT
-    fi
-
-    AC_MSG_CHECKING([whether to use included gettext])
-    AC_MSG_RESULT($with_included_gettext)
-
-    if test "$with_included_gettext" = yes; then
-      LIBOBJS="$LIBOBJS gettext.o"
-    fi
-
-    AC_DEFINE(HAVE_GETTEXT, 1, [Define if you have the gettext function.])
-    AC_DEFINE(HAVE_DCGETTEXT, 1, [Define if you have the dcgettext function.])
-
-    AC_CHECK_FUNCS(getcwd setlocale stpcpy)
-    AM_LC_MESSAGES
-
-    if test -z "$ALL_LINGUAS"; then
-      AC_MSG_WARN(This package does not install translations yet.)
-    else
-      ac_items="$ALL_LINGUAS"
-      for ac_item in $ac_items; do
-	ALL_POFILES="$ALL_POFILES $ac_item.po"
-	ALL_MOFILES="$ALL_MOFILES $ac_item.mo"
-      done
-    fi
-    AC_SUBST(ALL_LINGUAS)
-    AC_SUBST(ALL_POFILES)
-    AC_SUBST(ALL_MOFILES)
-
-    AC_MSG_CHECKING(which translations to install)
-    if test -z "$LINGUAS"; then
-      ac_print="$ALL_LINGUAS"
-      MOFILES="$ALL_MOFILES"
-    else
-      ac_items="$LINGUAS"
-      for ac_item in $ac_items; do
-	case "$ALL_LINGUAS" in
-	  *$ac_item*)
-	    ac_print="$ac_print $ac_item"
-	    MOFILES="$MOFILES $ac_item.mo"
-	    ;;
-	esac
-      done
-    fi
-    AC_SUBST(MOFILES)
-    if test -z "$ac_print"; then
-      AC_MSG_RESULT(none)
-    else
-      AC_MSG_RESULT($ac_print)
-    fi
-
-    if test "x$prefix" = xNONE; then
-      AC_DEFINE_UNQUOTED(LOCALEDIR, "$ac_default_prefix/share/locale")
-    else
-      AC_DEFINE_UNQUOTED(LOCALEDIR, "$prefix/share/locale")
-    fi
-  fi])

buildtools/windows/source/make-3.79.1/aclocal.m4

@@ -1,693 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl acinclude.m4 -- Extra macros needed for GNU make.
-dnl
-dnl Automake will incorporate this into its generated aclocal.m4.
-
-dnl ---------------------------------------------------------------------------
-dnl Got this from the lynx 2.8 distribution.
-dnl by T.E.Dickey <dickey@clark.net>
-dnl and Jim Spath <jspath@mail.bcpl.lib.md.us>
-dnl and Philippe De Muyter <phdm@macqel.be>
-dnl
-dnl Created: 1997/1/28
-dnl Updated: 1997/12/23
-dnl ---------------------------------------------------------------------------
-dnl After checking for functions in the default $LIBS, make a further check
-dnl for the functions that are netlib-related (these aren't always in the
-dnl libc, etc., and have to be handled specially because there are conflicting
-dnl and broken implementations.
-dnl Common library requirements (in order):
-dnl	-lresolv -lsocket -lnsl
-dnl	-lnsl -lsocket
-dnl	-lsocket
-dnl	-lbsd
-AC_DEFUN([CF_NETLIBS],[
-cf_test_netlibs=no
-AC_MSG_CHECKING(for network libraries)
-AC_CACHE_VAL(cf_cv_netlibs,[
-AC_MSG_RESULT(working...)
-cf_cv_netlibs=""
-cf_test_netlibs=yes
-AC_CHECK_FUNCS(gethostname,,[
-	CF_RECHECK_FUNC(gethostname,nsl,cf_cv_netlibs,[
-		CF_RECHECK_FUNC(gethostname,socket,cf_cv_netlibs)])])
-#
-# FIXME:  sequent needs this library (i.e., -lsocket -linet -lnsl), but
-# I don't know the entrypoints - 97/7/22 TD
-AC_CHECK_LIB(inet,main,cf_cv_netlibs="-linet $cf_cv_netlibs")
-#
-if test "$ac_cv_func_lsocket" != no ; then
-AC_CHECK_FUNCS(socket,,[
-	CF_RECHECK_FUNC(socket,socket,cf_cv_netlibs,[
-		CF_RECHECK_FUNC(socket,bsd,cf_cv_netlibs)])])
-fi
-#
-AC_CHECK_FUNCS(gethostbyname,,[
-	CF_RECHECK_FUNC(gethostbyname,nsl,cf_cv_netlibs)])
-#
-AC_CHECK_FUNCS(strcasecmp,,[
-	CF_RECHECK_FUNC(strcasecmp,resolv,cf_cv_netlibs)])
-])
-LIBS="$LIBS $cf_cv_netlibs"
-test $cf_test_netlibs = no && echo "$cf_cv_netlibs" >&AC_FD_MSG
-])dnl
-dnl ---------------------------------------------------------------------------
-dnl Re-check on a function to see if we can pick it up by adding a library.
-dnl	$1 = function to check
-dnl	$2 = library to check in
-dnl	$3 = environment to update (e.g., $LIBS)
-dnl	$4 = what to do if this fails
-dnl
-dnl This uses 'unset' if the shell happens to support it, but leaves the
-dnl configuration variable set to 'unknown' if not.  This is a little better
-dnl than the normal autoconf test, which gives misleading results if a test
-dnl for the function is made (e.g., with AC_CHECK_FUNC) after this macro is
-dnl used (autoconf does not distinguish between a null token and one that is
-dnl set to 'no').
-AC_DEFUN([CF_RECHECK_FUNC],[
-AC_CHECK_LIB($2,$1,[
-	CF_UPPER(cf_tr_func,$1)
-	AC_DEFINE_UNQUOTED(HAVE_$cf_tr_func)
-	ac_cv_func_$1=yes
-	$3="-l$2 [$]$3"],[
-	ac_cv_func_$1=unknown
-	unset ac_cv_func_$1 2>/dev/null
-	$4],
-	[[$]$3])
-])dnl
-dnl ---------------------------------------------------------------------------
-dnl Make an uppercase version of a variable
-dnl $1=uppercase($2)
-AC_DEFUN([CF_UPPER],
-[
-changequote(,)dnl
-$1=`echo $2 | tr '[a-z]' '[A-Z]'`
-changequote([,])dnl
-])dnl
-
-dnl ---------------------------------------------------------------------------
-dnl Got this from the GNU tar 1.13.11 distribution
-dnl by Paul Eggert <eggert@twinsun.com>
-dnl ---------------------------------------------------------------------------
-
-dnl By default, many hosts won't let programs access large files;
-dnl one must use special compiler options to get large-file access to work.
-dnl For more details about this brain damage please see:
-dnl http://www.sas.com/standards/large.file/x_open.20Mar96.html
-
-dnl Written by Paul Eggert <eggert@twinsun.com>.
-
-dnl Internal subroutine of AC_SYS_LARGEFILE.
-dnl AC_SYS_LARGEFILE_FLAGS(FLAGSNAME)
-AC_DEFUN(AC_SYS_LARGEFILE_FLAGS,
-  [AC_CACHE_CHECK([for $1 value to request large file support],
-     ac_cv_sys_largefile_$1,
-     [if ($GETCONF LFS_$1) >conftest.1 2>conftest.2 && test ! -s conftest.2
-      then
-        ac_cv_sys_largefile_$1=`cat conftest.1`
-      else
-	ac_cv_sys_largefile_$1=no
-	ifelse($1, CFLAGS,
-	  [case "$host_os" in
-	   # HP-UX 10.20 requires -D__STDC_EXT__ with gcc 2.95.1.
-changequote(, )dnl
-	   hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
-changequote([, ])dnl
-	     if test "$GCC" = yes; then
-	       ac_cv_sys_largefile_CFLAGS=-D__STDC_EXT__
-	     fi
-	     ;;
-	   # IRIX 6.2 and later require cc -n32.
-changequote(, )dnl
-	   irix6.[2-9]* | irix6.1[0-9]* | irix[7-9].* | irix[1-9][0-9]*)
-changequote([, ])dnl
-	     if test "$GCC" != yes; then
-	       ac_cv_sys_largefile_CFLAGS=-n32
-	     fi
-	   esac
-	   if test "$ac_cv_sys_largefile_CFLAGS" != no; then
-	     ac_save_CC="$CC"
-	     CC="$CC $ac_cv_sys_largefile_CFLAGS"
-	     AC_TRY_LINK(, , , ac_cv_sys_largefile_CFLAGS=no)
-	     CC="$ac_save_CC"
-	   fi])
-      fi
-      rm -f conftest*])])
-
-dnl Internal subroutine of AC_SYS_LARGEFILE.
-dnl AC_SYS_LARGEFILE_SPACE_APPEND(VAR, VAL)
-AC_DEFUN(AC_SYS_LARGEFILE_SPACE_APPEND,
-  [case $2 in
-   no) ;;
-   ?*)
-     case "[$]$1" in
-     '') $1=$2 ;;
-     *) $1=[$]$1' '$2 ;;
-     esac ;;
-   esac])
-
-dnl Internal subroutine of AC_SYS_LARGEFILE.
-dnl AC_SYS_LARGEFILE_MACRO_VALUE(C-MACRO, CACHE-VAR, COMMENT, CODE-TO-SET-DEFAULT)
-AC_DEFUN(AC_SYS_LARGEFILE_MACRO_VALUE,
-  [AC_CACHE_CHECK([for $1], $2,
-     [$2=no
-changequote(, )dnl
-      $4
-      for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
-	case "$ac_flag" in
-	-D$1)
-	  $2=1 ;;
-	-D$1=*)
-	  $2=`expr " $ac_flag" : '[^=]*=\(.*\)'` ;;
-	esac
-      done
-changequote([, ])dnl
-      ])
-   if test "[$]$2" != no; then
-     AC_DEFINE_UNQUOTED([$1], [$]$2, [$3])
-   fi])
-
-AC_DEFUN(AC_SYS_LARGEFILE,
-  [AC_REQUIRE([AC_CANONICAL_HOST])
-   AC_ARG_ENABLE(largefile,
-     [  --disable-largefile     omit support for large files])
-   if test "$enable_largefile" != no; then
-     AC_CHECK_TOOL(GETCONF, getconf)
-     AC_SYS_LARGEFILE_FLAGS(CFLAGS)
-     AC_SYS_LARGEFILE_FLAGS(LDFLAGS)
-     AC_SYS_LARGEFILE_FLAGS(LIBS)
-
-     for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
-       case "$ac_flag" in
-       no) ;;
-       -D_FILE_OFFSET_BITS=*) ;;
-       -D_LARGEFILE_SOURCE | -D_LARGEFILE_SOURCE=*) ;;
-       -D_LARGE_FILES | -D_LARGE_FILES=*) ;;
-       -D?* | -I?*)
-	 AC_SYS_LARGEFILE_SPACE_APPEND(CPPFLAGS, "$ac_flag") ;;
-       *)
-	 AC_SYS_LARGEFILE_SPACE_APPEND(CFLAGS, "$ac_flag") ;;
-       esac
-     done
-     AC_SYS_LARGEFILE_SPACE_APPEND(LDFLAGS, "$ac_cv_sys_largefile_LDFLAGS")
-     AC_SYS_LARGEFILE_SPACE_APPEND(LIBS, "$ac_cv_sys_largefile_LIBS")
-     AC_SYS_LARGEFILE_MACRO_VALUE(_FILE_OFFSET_BITS,
-       ac_cv_sys_file_offset_bits,
-       [Number of bits in a file offset, on hosts where this is settable.],
-       [case "$host_os" in
-	# HP-UX 10.20 and later
-	hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
-	  ac_cv_sys_file_offset_bits=64 ;;
-	esac])
-     AC_SYS_LARGEFILE_MACRO_VALUE(_LARGEFILE_SOURCE,
-       ac_cv_sys_largefile_source,
-       [Define to make fseeko etc. visible, on some hosts.],
-       [case "$host_os" in
-	# HP-UX 10.20 and later
-	hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
-	  ac_cv_sys_largefile_source=1 ;;
-	esac])
-     AC_SYS_LARGEFILE_MACRO_VALUE(_LARGE_FILES,
-       ac_cv_sys_large_files,
-       [Define for large files, on AIX-style hosts.],
-       [case "$host_os" in
-	# AIX 4.2 and later
-	aix4.[2-9]* | aix4.1[0-9]* | aix[5-9].* | aix[1-9][0-9]*)
-	  ac_cv_sys_large_files=1 ;;
-	esac])
-   fi
-  ])
-
-
-dnl ---------------------------------------------------------------------------
-dnl From Paul Eggert <eggert@twinsun.com>
-
-dnl Define HAVE_INTTYPES_H if <inttypes.h> exists,
-dnl doesn't clash with <sys/types.h>, and declares uintmax_t.
-
-AC_DEFUN(jm_AC_HEADER_INTTYPES_H,
-[
-  if test x = y; then
-    dnl This code is deliberately never run via ./configure.
-    dnl FIXME: this is a gross hack to make autoheader put an entry
-    dnl for `HAVE_INTTYPES_H' in config.h.in.
-    AC_CHECK_FUNCS(INTTYPES_H)
-  fi
-  AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
-  [AC_TRY_COMPILE(
-    [#include <sys/types.h>
-#include <inttypes.h>],
-    [uintmax_t i = (uintmax_t) -1;],
-    jm_ac_cv_header_inttypes_h=yes,
-    jm_ac_cv_header_inttypes_h=no)])
-  if test $jm_ac_cv_header_inttypes_h = yes; then
-    ac_kludge=HAVE_INTTYPES_H
-    AC_DEFINE_UNQUOTED($ac_kludge)
-  fi
-])
-
-
-dnl ---------------------------------------------------------------------------
-dnl From Paul Eggert <eggert@twinsun.com>
-
-AC_DEFUN(AC_STRUCT_ST_MTIM_NSEC,
- [AC_CACHE_CHECK([for nanoseconds member of struct stat.st_mtim],
-   ac_cv_struct_st_mtim_nsec,
-   [ac_save_CPPFLAGS="$CPPFLAGS"
-    ac_cv_struct_st_mtim_nsec=no
-    # tv_nsec -- the usual case
-    # _tv_nsec -- Solaris 2.6, if
-    #	(defined _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED == 1
-    #	 && !defined __EXTENSIONS__)
-    # st__tim.tv_nsec -- UnixWare 2.1.2
-    for ac_val in tv_nsec _tv_nsec st__tim.tv_nsec; do
-      CPPFLAGS="$ac_save_CPPFLAGS -DST_MTIM_NSEC=$ac_val"
-      AC_TRY_COMPILE([#include <sys/types.h>
-#include <sys/stat.h>], [struct stat s; s.st_mtim.ST_MTIM_NSEC;],
-        [ac_cv_struct_st_mtim_nsec=$ac_val; break])
-    done
-    CPPFLAGS="$ac_save_CPPFLAGS"])
-
-  if test $ac_cv_struct_st_mtim_nsec != no; then
-    AC_DEFINE_UNQUOTED(ST_MTIM_NSEC, $ac_cv_struct_st_mtim_nsec)
-  fi
- ]
-)
-
-dnl ---------------------------------------------------------------------------
-dnl From Paul Eggert <eggert@twinsun.com>
-
-dnl Define uintmax_t to `unsigned long' or `unsigned long long'
-dnl if <inttypes.h> does not exist.
-
-AC_DEFUN(jm_AC_TYPE_UINTMAX_T,
-[
-  AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
-  if test $jm_ac_cv_header_inttypes_h = no; then
-    AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long,
-    [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;],
-      [unsigned long long ullmax = (unsigned long long) -1;
-       return ull << i | ull >> i | ullmax / ull | ullmax % ull;],
-      ac_cv_type_unsigned_long_long=yes,
-      ac_cv_type_unsigned_long_long=no)])
-    if test $ac_cv_type_unsigned_long_long = yes; then
-      AC_DEFINE(uintmax_t, unsigned long long)
-    else
-      AC_DEFINE(uintmax_t, unsigned long)
-    fi
-  fi
-])
-
-
-# The following is taken from automake 1.4,
-# except that it prefers the compiler option -Ae to "-Aa -D_HPUX_SOURCE"
-# because only the former supports 64-bit integral types on HP-UX 10.20.
-
-
-# serial 2
-
-# @defmac AC_PROG_CC_STDC
-# @maindex PROG_CC_STDC
-# @ovindex CC
-# If the C compiler in not in ANSI C mode by default, try to add an option
-# to output variable @code{CC} to make it so.  This macro tries various
-# options that select ANSI C on some system or another.  It considers the
-# compiler to be in ANSI C mode if it handles function prototypes correctly.
-#
-# If you use this macro, you should check after calling it whether the C
-# compiler has been set to accept ANSI C; if not, the shell variable
-# @code{am_cv_prog_cc_stdc} is set to @samp{no}.  If you wrote your source
-# code in ANSI C, you can make an un-ANSIfied copy of it by using the
-# program @code{ansi2knr}, which comes with Ghostscript.
-# @end defmac
-
-AC_DEFUN(AM_PROG_CC_STDC,
-[AC_REQUIRE([AC_PROG_CC])
-AC_BEFORE([$0], [AC_C_INLINE])
-AC_BEFORE([$0], [AC_C_CONST])
-dnl Force this before AC_PROG_CPP.  Some cpp's, eg on HPUX, require
-dnl a magic option to avoid problems with ANSI preprocessor commands
-dnl like #elif.
-dnl FIXME: can't do this because then AC_AIX won't work due to a
-dnl circular dependency.
-dnl AC_BEFORE([$0], [AC_PROG_CPP])
-AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C)
-AC_CACHE_VAL(am_cv_prog_cc_stdc,
-[am_cv_prog_cc_stdc=no
-ac_save_CC="$CC"
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX			-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  AC_TRY_COMPILE(
-[#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-], [
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-],
-[am_cv_prog_cc_stdc="$ac_arg"; break])
-done
-CC="$ac_save_CC"
-])
-if test -z "$am_cv_prog_cc_stdc"; then
-  AC_MSG_RESULT([none needed])
-else
-  AC_MSG_RESULT($am_cv_prog_cc_stdc)
-fi
-case "x$am_cv_prog_cc_stdc" in
-  x|xno) ;;
-  *) CC="$CC $am_cv_prog_cc_stdc" ;;
-esac
-])
-
-dnl ---------------------------------------------------------------------------
-dnl Enable internationalization support for GNU make.
-dnl Original obtained from the libit 0.7 distribution
-dnl Rewritten by Paul D. Smith <psmith@gnu.org>
-dnl This version is much more straightforward than the original (I think);
-dnl If the user doesn't disable NLS, check whether she asked for the
-dnl included gettext.  If so, we use that.  If not, test to see if the
-dnl system gettext is GNU.  If not, use the included gettext.  If so,
-dnl use the system gettext.  We are very strict about testing for GNU
-dnl gettext; not only must the library be GNU gettext, but the libintl.h
-dnl file must also be GNU.
-dnl
-AC_DEFUN(pds_CHECK_SYSTEM_GETTEXT, [
-
-  # OK.  What we're going to do is see if the system gettext is really
-  # GNU gettext, and we're going to make _sure_ (as we can) that if
-  # it's not we'll use the included gettext.
-
-  pds_keep_LIBS="$LIBS"
-
-  # Look around for gettext() and libintl.h on the system
-  AC_CHECK_HEADERS(locale.h)
-  AC_SEARCH_LIBS(gettext, intl)
-  if test "$ac_cv_search_gettext" = no; then
-    with_included_gettext=yes
-
-  else
-    # We only want to deal with GNU's gettext; if we don't have that
-    # we'll just use our own, thanks very much.
-    AC_CACHE_CHECK([whether the system has GNU gettext],
-                   pds_cv_system_gnu_gettext, [
-      AC_TRY_LINK([
-#include <libintl.h>
-#ifdef HAVE_LOCALE_H
-#include <locale.h>
-#endif
-], [
-#if __USE_GNU_GETTEXT
-  extern int _nl_msg_cat_cntr;
-  return _nl_msg_cat_cntr;
-#else
-not GNU gettext
-#endif
-],
-	pds_cv_system_gnu_gettext=yes, pds_cv_system_gnu_gettext=no)])
-
-    if test "x$pds_cv_system_gnu_gettext" = xyes; then
-      with_included_gettext=no
-      AC_DEFINE(HAVE_LIBINTL_H, 1, [Define if you have <libintl.h>.])
-    else
-      with_included_gettext=yes
-      LIBS="$pds_keep_LIBS"
-    fi
-  fi
-])
-
-
-AC_DEFUN(pds_WITH_GETTEXT, [
-
-  AC_MSG_CHECKING(whether NLS is wanted)
-  AC_ARG_ENABLE(nls,
-    [  --disable-nls           disallow Native Language Support],
-    enable_nls=$enableval, enable_nls=yes)
-  AC_MSG_RESULT($enable_nls)
-  use_nls=$enable_nls
-  AM_CONDITIONAL(USE_NLS, test $use_nls = yes)
-
-  if test $enable_nls = yes; then
-    AC_DEFINE(ENABLE_NLS, 1, [Define if NLS is requested.])
-
-    # We don't support catgets at all
-    if test "x$with_catgets" != x; then
-      AC_MSG_WARN([catgets not supported; --with-catgets ignored])
-    fi
-
-    # Find out what the user wants.
-
-    AC_ARG_WITH(included-gettext,
-      [  --with-included-gettext use the GNU gettext library included here],
-      with_included_gettext=yes,
-      with_included_gettext=maybe)
-
-    if test "x$with_included_gettext" != xyes; then
-      pds_CHECK_SYSTEM_GETTEXT
-    fi
-
-    AC_MSG_CHECKING([whether to use included gettext])
-    AC_MSG_RESULT($with_included_gettext)
-
-    if test "$with_included_gettext" = yes; then
-      LIBOBJS="$LIBOBJS gettext.o"
-    fi
-
-    AC_DEFINE(HAVE_GETTEXT, 1, [Define if you have the gettext function.])
-    AC_DEFINE(HAVE_DCGETTEXT, 1, [Define if you have the dcgettext function.])
-
-    AC_CHECK_FUNCS(getcwd setlocale stpcpy)
-    AM_LC_MESSAGES
-
-    if test -z "$ALL_LINGUAS"; then
-      AC_MSG_WARN(This package does not install translations yet.)
-    else
-      ac_items="$ALL_LINGUAS"
-      for ac_item in $ac_items; do
-	ALL_POFILES="$ALL_POFILES $ac_item.po"
-	ALL_MOFILES="$ALL_MOFILES $ac_item.mo"
-      done
-    fi
-    AC_SUBST(ALL_LINGUAS)
-    AC_SUBST(ALL_POFILES)
-    AC_SUBST(ALL_MOFILES)
-
-    AC_MSG_CHECKING(which translations to install)
-    if test -z "$LINGUAS"; then
-      ac_print="$ALL_LINGUAS"
-      MOFILES="$ALL_MOFILES"
-    else
-      ac_items="$LINGUAS"
-      for ac_item in $ac_items; do
-	case "$ALL_LINGUAS" in
-	  *$ac_item*)
-	    ac_print="$ac_print $ac_item"
-	    MOFILES="$MOFILES $ac_item.mo"
-	    ;;
-	esac
-      done
-    fi
-    AC_SUBST(MOFILES)
-    if test -z "$ac_print"; then
-      AC_MSG_RESULT(none)
-    else
-      AC_MSG_RESULT($ac_print)
-    fi
-
-    if test "x$prefix" = xNONE; then
-      AC_DEFINE_UNQUOTED(LOCALEDIR, "$ac_default_prefix/share/locale")
-    else
-      AC_DEFINE_UNQUOTED(LOCALEDIR, "$prefix/share/locale")
-    fi
-  fi])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi])
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-AC_DEFUN(AM_LC_MESSAGES,
-  [if test $ac_cv_header_locale_h = yes; then
-    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
-      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
-       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
-    if test $am_cv_val_LC_MESSAGES = yes; then
-      AC_DEFINE(HAVE_LC_MESSAGES)
-    fi
-  fi])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Like AC_CONFIG_HEADER, but automatically create stamp file.
-
-AC_DEFUN(AM_CONFIG_HEADER,
-[AC_PREREQ([2.12])
-AC_CONFIG_HEADER([$1])
-dnl When config.status generates a header, we must update the stamp-h file.
-dnl This file resides in the same directory as the config header
-dnl that is generated.  We must strip everything past the first ":",
-dnl and everything past the last "/".
-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
-<<am_indx=1
-for am_file in <<$1>>; do
-  case " <<$>>CONFIG_HEADERS " in
-  *" <<$>>am_file "*<<)>>
-    echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
-    ;;
-  esac
-  am_indx=`expr "<<$>>am_indx" + 1`
-done<<>>dnl>>)
-changequote([,]))])
-

buildtools/windows/source/make-3.79.1/alloca.c

@@ -1,504 +0,0 @@
-/* alloca.c -- allocate automatically reclaimed memory
-   (Mostly) portable public-domain implementation -- D A Gwyn
-
-   This implementation of the PWB library alloca function,
-   which is used to allocate space off the run-time stack so
-   that it is automatically reclaimed upon procedure exit,
-   was inspired by discussions with J. Q. Johnson of Cornell.
-   J.Otto Tennant <jot@cray.com> contributed the Cray support.
-
-   There are some preprocessor constants that can
-   be defined when compiling for your specific system, for
-   improved efficiency; however, the defaults should be okay.
-
-   The general concept of this implementation is to keep
-   track of all alloca-allocated blocks, and reclaim any
-   that are found to be deeper in the stack than the current
-   invocation.  This heuristic does not reclaim storage as
-   soon as it becomes invalid, but it will do so eventually.
-
-   As a special case, alloca(0) reclaims storage without
-   allocating any.  It is a good idea to use alloca(0) in
-   your main control loop, etc. to force garbage collection.  */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#ifdef HAVE_STRING_H
-#include <string.h>
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-
-#ifdef emacs
-#include "blockinput.h"
-#endif
-
-/* If compiling with GCC 2, this file's not needed.  */
-#if !defined (__GNUC__) || __GNUC__ < 2
-
-/* If someone has defined alloca as a macro,
-   there must be some other way alloca is supposed to work.  */
-#ifndef alloca
-
-#ifdef emacs
-#ifdef static
-/* actually, only want this if static is defined as ""
-   -- this is for usg, in which emacs must undefine static
-   in order to make unexec workable
-   */
-#ifndef STACK_DIRECTION
-you
-lose
--- must know STACK_DIRECTION at compile-time
-#endif /* STACK_DIRECTION undefined */
-#endif /* static */
-#endif /* emacs */
-
-/* If your stack is a linked list of frames, you have to
-   provide an "address metric" ADDRESS_FUNCTION macro.  */
-
-#if defined (CRAY) && defined (CRAY_STACKSEG_END)
-long i00afunc ();
-#define ADDRESS_FUNCTION(arg) (char *) i00afunc (&(arg))
-#else
-#define ADDRESS_FUNCTION(arg) &(arg)
-#endif
-
-#if __STDC__
-typedef void *pointer;
-#else
-typedef char *pointer;
-#endif
-
-#ifndef NULL
-#define	NULL	0
-#endif
-
-/* Different portions of Emacs need to call different versions of
-   malloc.  The Emacs executable needs alloca to call xmalloc, because
-   ordinary malloc isn't protected from input signals.  On the other
-   hand, the utilities in lib-src need alloca to call malloc; some of
-   them are very simple, and don't have an xmalloc routine.
-
-   Non-Emacs programs expect this to call use xmalloc.
-
-   Callers below should use malloc.  */
-
-#ifndef emacs
-#define malloc xmalloc
-#endif
-extern pointer malloc ();
-
-/* Define STACK_DIRECTION if you know the direction of stack
-   growth for your system; otherwise it will be automatically
-   deduced at run-time.
-
-   STACK_DIRECTION > 0 => grows toward higher addresses
-   STACK_DIRECTION < 0 => grows toward lower addresses
-   STACK_DIRECTION = 0 => direction of growth unknown  */
-
-#ifndef STACK_DIRECTION
-#define	STACK_DIRECTION	0	/* Direction unknown.  */
-#endif
-
-#if STACK_DIRECTION != 0
-
-#define	STACK_DIR	STACK_DIRECTION	/* Known at compile-time.  */
-
-#else /* STACK_DIRECTION == 0; need run-time code.  */
-
-static int stack_dir;		/* 1 or -1 once known.  */
-#define	STACK_DIR	stack_dir
-
-static void
-find_stack_direction ()
-{
-  static char *addr = NULL;	/* Address of first `dummy', once known.  */
-  auto char dummy;		/* To get stack address.  */
-
-  if (addr == NULL)
-    {				/* Initial entry.  */
-      addr = ADDRESS_FUNCTION (dummy);
-
-      find_stack_direction ();	/* Recurse once.  */
-    }
-  else
-    {
-      /* Second entry.  */
-      if (ADDRESS_FUNCTION (dummy) > addr)
-	stack_dir = 1;		/* Stack grew upward.  */
-      else
-	stack_dir = -1;		/* Stack grew downward.  */
-    }
-}
-
-#endif /* STACK_DIRECTION == 0 */
-
-/* An "alloca header" is used to:
-   (a) chain together all alloca'ed blocks;
-   (b) keep track of stack depth.
-
-   It is very important that sizeof(header) agree with malloc
-   alignment chunk size.  The following default should work okay.  */
-
-#ifndef	ALIGN_SIZE
-#define	ALIGN_SIZE	sizeof(double)
-#endif
-
-typedef union hdr
-{
-  char align[ALIGN_SIZE];	/* To force sizeof(header).  */
-  struct
-    {
-      union hdr *next;		/* For chaining headers.  */
-      char *deep;		/* For stack depth measure.  */
-    } h;
-} header;
-
-static header *last_alloca_header = NULL;	/* -> last alloca header.  */
-
-/* Return a pointer to at least SIZE bytes of storage,
-   which will be automatically reclaimed upon exit from
-   the procedure that called alloca.  Originally, this space
-   was supposed to be taken from the current stack frame of the
-   caller, but that method cannot be made to work for some
-   implementations of C, for example under Gould's UTX/32.  */
-
-pointer
-alloca (size)
-     unsigned size;
-{
-  auto char probe;		/* Probes stack depth: */
-  register char *depth = ADDRESS_FUNCTION (probe);
-
-#if STACK_DIRECTION == 0
-  if (STACK_DIR == 0)		/* Unknown growth direction.  */
-    find_stack_direction ();
-#endif
-
-  /* Reclaim garbage, defined as all alloca'd storage that
-     was allocated from deeper in the stack than currently.  */
-
-  {
-    register header *hp;	/* Traverses linked list.  */
-
-#ifdef emacs
-    BLOCK_INPUT;
-#endif
-
-    for (hp = last_alloca_header; hp != NULL;)
-      if ((STACK_DIR > 0 && hp->h.deep > depth)
-	  || (STACK_DIR < 0 && hp->h.deep < depth))
-	{
-	  register header *np = hp->h.next;
-
-	  free ((pointer) hp);	/* Collect garbage.  */
-
-	  hp = np;		/* -> next header.  */
-	}
-      else
-	break;			/* Rest are not deeper.  */
-
-    last_alloca_header = hp;	/* -> last valid storage.  */
-
-#ifdef emacs
-    UNBLOCK_INPUT;
-#endif
-  }
-
-  if (size == 0)
-    return NULL;		/* No allocation required.  */
-
-  /* Allocate combined header + user data storage.  */
-
-  {
-    register pointer new = malloc (sizeof (header) + size);
-    /* Address of header.  */
-
-    if (new == 0)
-      abort();
-
-    ((header *) new)->h.next = last_alloca_header;
-    ((header *) new)->h.deep = depth;
-
-    last_alloca_header = (header *) new;
-
-    /* User storage begins just after header.  */
-
-    return (pointer) ((char *) new + sizeof (header));
-  }
-}
-
-#if defined (CRAY) && defined (CRAY_STACKSEG_END)
-
-#ifdef DEBUG_I00AFUNC
-#include <stdio.h>
-#endif
-
-#ifndef CRAY_STACK
-#define CRAY_STACK
-#ifndef CRAY2
-/* Stack structures for CRAY-1, CRAY X-MP, and CRAY Y-MP */
-struct stack_control_header
-  {
-    long shgrow:32;		/* Number of times stack has grown.  */
-    long shaseg:32;		/* Size of increments to stack.  */
-    long shhwm:32;		/* High water mark of stack.  */
-    long shsize:32;		/* Current size of stack (all segments).  */
-  };
-
-/* The stack segment linkage control information occurs at
-   the high-address end of a stack segment.  (The stack
-   grows from low addresses to high addresses.)  The initial
-   part of the stack segment linkage control information is
-   0200 (octal) words.  This provides for register storage
-   for the routine which overflows the stack.  */
-
-struct stack_segment_linkage
-  {
-    long ss[0200];		/* 0200 overflow words.  */
-    long sssize:32;		/* Number of words in this segment.  */
-    long ssbase:32;		/* Offset to stack base.  */
-    long:32;
-    long sspseg:32;		/* Offset to linkage control of previous
-				   segment of stack.  */
-    long:32;
-    long sstcpt:32;		/* Pointer to task common address block.  */
-    long sscsnm;		/* Private control structure number for
-				   microtasking.  */
-    long ssusr1;		/* Reserved for user.  */
-    long ssusr2;		/* Reserved for user.  */
-    long sstpid;		/* Process ID for pid based multi-tasking.  */
-    long ssgvup;		/* Pointer to multitasking thread giveup.  */
-    long sscray[7];		/* Reserved for Cray Research.  */
-    long ssa0;
-    long ssa1;
-    long ssa2;
-    long ssa3;
-    long ssa4;
-    long ssa5;
-    long ssa6;
-    long ssa7;
-    long sss0;
-    long sss1;
-    long sss2;
-    long sss3;
-    long sss4;
-    long sss5;
-    long sss6;
-    long sss7;
-  };
-
-#else /* CRAY2 */
-/* The following structure defines the vector of words
-   returned by the STKSTAT library routine.  */
-struct stk_stat
-  {
-    long now;			/* Current total stack size.  */
-    long maxc;			/* Amount of contiguous space which would
-				   be required to satisfy the maximum
-				   stack demand to date.  */
-    long high_water;		/* Stack high-water mark.  */
-    long overflows;		/* Number of stack overflow ($STKOFEN) calls.  */
-    long hits;			/* Number of internal buffer hits.  */
-    long extends;		/* Number of block extensions.  */
-    long stko_mallocs;		/* Block allocations by $STKOFEN.  */
-    long underflows;		/* Number of stack underflow calls ($STKRETN).  */
-    long stko_free;		/* Number of deallocations by $STKRETN.  */
-    long stkm_free;		/* Number of deallocations by $STKMRET.  */
-    long segments;		/* Current number of stack segments.  */
-    long maxs;			/* Maximum number of stack segments so far.  */
-    long pad_size;		/* Stack pad size.  */
-    long current_address;	/* Current stack segment address.  */
-    long current_size;		/* Current stack segment size.  This
-				   number is actually corrupted by STKSTAT to
-				   include the fifteen word trailer area.  */
-    long initial_address;	/* Address of initial segment.  */
-    long initial_size;		/* Size of initial segment.  */
-  };
-
-/* The following structure describes the data structure which trails
-   any stack segment.  I think that the description in 'asdef' is
-   out of date.  I only describe the parts that I am sure about.  */
-
-struct stk_trailer
-  {
-    long this_address;		/* Address of this block.  */
-    long this_size;		/* Size of this block (does not include
-				   this trailer).  */
-    long unknown2;
-    long unknown3;
-    long link;			/* Address of trailer block of previous
-				   segment.  */
-    long unknown5;
-    long unknown6;
-    long unknown7;
-    long unknown8;
-    long unknown9;
-    long unknown10;
-    long unknown11;
-    long unknown12;
-    long unknown13;
-    long unknown14;
-  };
-
-#endif /* CRAY2 */
-#endif /* not CRAY_STACK */
-
-#ifdef CRAY2
-/* Determine a "stack measure" for an arbitrary ADDRESS.
-   I doubt that "lint" will like this much.  */
-
-static long
-i00afunc (long *address)
-{
-  struct stk_stat status;
-  struct stk_trailer *trailer;
-  long *block, size;
-  long result = 0;
-
-  /* We want to iterate through all of the segments.  The first
-     step is to get the stack status structure.  We could do this
-     more quickly and more directly, perhaps, by referencing the
-     $LM00 common block, but I know that this works.  */
-
-  STKSTAT (&status);
-
-  /* Set up the iteration.  */
-
-  trailer = (struct stk_trailer *) (status.current_address
-				    + status.current_size
-				    - 15);
-
-  /* There must be at least one stack segment.  Therefore it is
-     a fatal error if "trailer" is null.  */
-
-  if (trailer == 0)
-    abort ();
-
-  /* Discard segments that do not contain our argument address.  */
-
-  while (trailer != 0)
-    {
-      block = (long *) trailer->this_address;
-      size = trailer->this_size;
-      if (block == 0 || size == 0)
-	abort ();
-      trailer = (struct stk_trailer *) trailer->link;
-      if ((block <= address) && (address < (block + size)))
-	break;
-    }
-
-  /* Set the result to the offset in this segment and add the sizes
-     of all predecessor segments.  */
-
-  result = address - block;
-
-  if (trailer == 0)
-    {
-      return result;
-    }
-
-  do
-    {
-      if (trailer->this_size <= 0)
-	abort ();
-      result += trailer->this_size;
-      trailer = (struct stk_trailer *) trailer->link;
-    }
-  while (trailer != 0);
-
-  /* We are done.  Note that if you present a bogus address (one
-     not in any segment), you will get a different number back, formed
-     from subtracting the address of the first block.  This is probably
-     not what you want.  */
-
-  return (result);
-}
-
-#else /* not CRAY2 */
-/* Stack address function for a CRAY-1, CRAY X-MP, or CRAY Y-MP.
-   Determine the number of the cell within the stack,
-   given the address of the cell.  The purpose of this
-   routine is to linearize, in some sense, stack addresses
-   for alloca.  */
-
-static long
-i00afunc (long address)
-{
-  long stkl = 0;
-
-  long size, pseg, this_segment, stack;
-  long result = 0;
-
-  struct stack_segment_linkage *ssptr;
-
-  /* Register B67 contains the address of the end of the
-     current stack segment.  If you (as a subprogram) store
-     your registers on the stack and find that you are past
-     the contents of B67, you have overflowed the segment.
-
-     B67 also points to the stack segment linkage control
-     area, which is what we are really interested in.  */
-
-  stkl = CRAY_STACKSEG_END ();
-  ssptr = (struct stack_segment_linkage *) stkl;
-
-  /* If one subtracts 'size' from the end of the segment,
-     one has the address of the first word of the segment.
-
-     If this is not the first segment, 'pseg' will be
-     nonzero.  */
-
-  pseg = ssptr->sspseg;
-  size = ssptr->sssize;
-
-  this_segment = stkl - size;
-
-  /* It is possible that calling this routine itself caused
-     a stack overflow.  Discard stack segments which do not
-     contain the target address.  */
-
-  while (!(this_segment <= address && address <= stkl))
-    {
-#ifdef DEBUG_I00AFUNC
-      fprintf (stderr, "%011o %011o %011o\n", this_segment, address, stkl);
-#endif
-      if (pseg == 0)
-	break;
-      stkl = stkl - pseg;
-      ssptr = (struct stack_segment_linkage *) stkl;
-      size = ssptr->sssize;
-      pseg = ssptr->sspseg;
-      this_segment = stkl - size;
-    }
-
-  result = address - this_segment;
-
-  /* If you subtract pseg from the current end of the stack,
-     you get the address of the previous stack segment's end.
-     This seems a little convoluted to me, but I'll bet you save
-     a cycle somewhere.  */
-
-  while (pseg != 0)
-    {
-#ifdef DEBUG_I00AFUNC
-      fprintf (stderr, "%011o %011o\n", pseg, size);
-#endif
-      stkl = stkl - pseg;
-      ssptr = (struct stack_segment_linkage *) stkl;
-      size = ssptr->sssize;
-      pseg = ssptr->sspseg;
-      result += size;
-    }
-  return (result);
-}
-
-#endif /* not CRAY2 */
-#endif /* CRAY */
-
-#endif /* no alloca */
-#endif /* not GCC version 2 */

buildtools/windows/source/make-3.79.1/amiga.c

@@ -1,123 +0,0 @@
-/* Running commands on Amiga
-Copyright (C) 1995, 1996 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU Make is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
-MA 02111-1307, USA.  */
-
-#include "make.h"
-#include "variable.h"
-#include "amiga.h"
-#include <assert.h>
-#include <exec/memory.h>
-#include <dos/dostags.h>
-#include <proto/exec.h>
-#include <proto/dos.h>
-
-static const char Amiga_version[] = "$VER: Make 3.74.3 (12.05.96) \n"
-		    "Amiga Port by A. Digulla (digulla@home.lake.de)";
-
-int
-MyExecute (argv)
-char ** argv;
-{
-    char * buffer, * ptr;
-    char ** aptr;
-    int len = 0;
-    int status;
-
-    for (aptr=argv; *aptr; aptr++)
-    {
-	len += strlen (*aptr) + 4;
-    }
-
-    buffer = AllocMem (len, MEMF_ANY);
-
-    if (!buffer)
-      fatal (NILF, "MyExecute: Cannot allocate space for calling a command");
-
-    ptr = buffer;
-
-    for (aptr=argv; *aptr; aptr++)
-    {
-	if (((*aptr)[0] == ';' && !(*aptr)[1]))
-	{
-	    *ptr ++ = '"';
-	    strcpy (ptr, *aptr);
-	    ptr += strlen (ptr);
-	    *ptr ++ = '"';
-	}
-	else if ((*aptr)[0] == '@' && (*aptr)[1] == '@' && !(*aptr)[2])
-	{
-	    *ptr ++ = '\n';
-	    continue;
-	}
-	else
-	{
-	    strcpy (ptr, *aptr);
-	    ptr += strlen (ptr);
-	}
-	*ptr ++ = ' ';
-	*ptr = 0;
-    }
-
-    ptr[-1] = '\n';
-
-    status = SystemTags (buffer,
-	SYS_UserShell, TRUE,
-	TAG_END);
-
-    FreeMem (buffer, len);
-
-    if (SetSignal(0L,0L) & SIGBREAKF_CTRL_C)
-	status = 20;
-
-    /* Warnings don't count */
-    if (status == 5)
-	status = 0;
-
-    return status;
-}
-
-char *
-wildcard_expansion (wc, o)
-char * wc, * o;
-{
-#   define PATH_SIZE	1024
-    struct AnchorPath * apath;
-
-    if ( (apath = AllocMem (sizeof (struct AnchorPath) + PATH_SIZE,
-	    MEMF_CLEAR))
-	)
-    {
-	apath->ap_Strlen = PATH_SIZE;
-
-	if (MatchFirst (wc, apath) == 0)
-	{
-	    do
-	    {
-		o = variable_buffer_output (o, apath->ap_Buf,
-			strlen (apath->ap_Buf));
-		o = variable_buffer_output (o, " ",1);
-	    } while (MatchNext (apath) == 0);
-	}
-
-	MatchEnd (apath);
-	FreeMem (apath, sizeof (struct AnchorPath) + PATH_SIZE);
-    }
-
-    return o;
-}
-

buildtools/windows/source/make-3.79.1/amiga.h

@@ -1,22 +0,0 @@
-/* Definitions for amiga specific things
-Copyright (C) 1995, 1996 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU Make is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
-MA 02111-1307, USA.  */
-
-extern int MyExecute PARAMS ((char ** argv));
-extern char * wildcard_expansion PARAMS ((char * wc, char * o));
-

buildtools/windows/source/make-3.79.1/ar.c

@@ -1,323 +0,0 @@
-/* Interface to `ar' archives for GNU Make.
-Copyright (C) 1988,89,90,91,92,93,97 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU Make is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#include "make.h"
-
-#ifndef	NO_ARCHIVES
-
-#include "filedef.h"
-#include "dep.h"
-#include <fnmatch.h>
-
-/* Defined in arscan.c.  */
-extern long int ar_scan PARAMS ((char *archive, long int (*function) (), long int arg));
-extern int ar_name_equal PARAMS ((char *name, char *mem, int truncated));
-#ifndef VMS
-extern int ar_member_touch PARAMS ((char *arname, char *memname));
-#endif
-
-/* Return nonzero if NAME is an archive-member reference, zero if not.
-   An archive-member reference is a name like `lib(member)'.
-   If a name like `lib((entry))' is used, a fatal error is signaled at
-   the attempt to use this unsupported feature.  */
-
-int
-ar_name (name)
-     char *name;
-{
-  char *p = strchr (name, '('), *end = name + strlen (name) - 1;
-
-  if (p == 0 || p == name || *end != ')')
-    return 0;
-
-  if (p[1] == '(' && end[-1] == ')')
-    fatal (NILF, _("attempt to use unsupported feature: `%s'"), name);
-
-  return 1;
-}
-
-
-/* Parse the archive-member reference NAME into the archive and member names.
-   Put the malloc'd archive name in *ARNAME_P if ARNAME_P is non-nil;
-   put the malloc'd member name in *MEMNAME_P if MEMNAME_P is non-nil.  */
-
-void
-ar_parse_name (name, arname_p, memname_p)
-     char *name, **arname_p, **memname_p;
-{
-  char *p = strchr (name, '('), *end = name + strlen (name) - 1;
-
-  if (arname_p != 0)
-    *arname_p = savestring (name, p - name);
-
-  if (memname_p != 0)
-    *memname_p = savestring (p + 1, end - (p + 1));
-}
-
-static long int ar_member_date_1 PARAMS ((int desc, char *mem, int truncated, long int hdrpos,
-	long int datapos, long int size, long int date, int uid, int gid, int mode, char *name));
-
-/* Return the modtime of NAME.  */
-
-time_t
-ar_member_date (name)
-     char *name;
-{
-  char *arname;
-  int arname_used = 0;
-  char *memname;
-  long int val;
-
-  ar_parse_name (name, &arname, &memname);
-
-  /* Make sure we know the modtime of the archive itself because we are
-     likely to be called just before commands to remake a member are run,
-     and they will change the archive itself.
-
-     But we must be careful not to enter_file the archive itself if it does
-     not exist, because pattern_search assumes that files found in the data
-     base exist or can be made.  */
-  {
-    struct file *arfile;
-    arfile = lookup_file (arname);
-    if (arfile == 0 && file_exists_p (arname))
-      {
-	arfile = enter_file (arname);
-	arname_used = 1;
-      }
-
-    if (arfile != 0)
-      (void) f_mtime (arfile, 0);
-  }
-
-  val = ar_scan (arname, ar_member_date_1, (long int) memname);
-
-  if (!arname_used)
-    free (arname);
-  free (memname);
-
-  return (val <= 0 ? (time_t) -1 : (time_t) val);
-}
-
-/* This function is called by `ar_scan' to find which member to look at.  */
-
-/* ARGSUSED */
-static long int
-ar_member_date_1 (desc, mem, truncated,
-		  hdrpos, datapos, size, date, uid, gid, mode, name)
-     int desc;
-     char *mem;
-     int truncated;
-     long int hdrpos, datapos, size, date;
-     int uid, gid, mode;
-     char *name;
-{
-  return ar_name_equal (name, mem, truncated) ? date : 0;
-}
-
-/* Set the archive-member NAME's modtime to now.  */
-
-#ifdef VMS
-int
-ar_touch (name)
-     char *name;
-{
-  error (NILF, _("touch archive member is not available on VMS"));
-  return -1;
-}
-#else
-int
-ar_touch (name)
-     char *name;
-{
-  char *arname, *memname;
-  int arname_used = 0;
-  register int val;
-
-  ar_parse_name (name, &arname, &memname);
-
-  /* Make sure we know the modtime of the archive itself before we
-     touch the member, since this will change the archive itself.  */
-  {
-    struct file *arfile;
-    arfile = lookup_file (arname);
-    if (arfile == 0)
-      {
-	arfile = enter_file (arname);
-	arname_used = 1;
-      }
-
-    (void) f_mtime (arfile, 0);
-  }
-
-  val = 1;
-  switch (ar_member_touch (arname, memname))
-    {
-    case -1:
-      error (NILF, _("touch: Archive `%s' does not exist"), arname);
-      break;
-    case -2:
-      error (NILF, _("touch: `%s' is not a valid archive"), arname);
-      break;
-    case -3:
-      perror_with_name ("touch: ", arname);
-      break;
-    case 1:
-      error (NILF,
-             _("touch: Member `%s' does not exist in `%s'"), memname, arname);
-      break;
-    case 0:
-      val = 0;
-      break;
-    default:
-      error (NILF,
-             _("touch: Bad return code from ar_member_touch on `%s'"), name);
-    }
-
-  if (!arname_used)
-    free (arname);
-  free (memname);
-
-  return val;
-}
-#endif /* !VMS */
-
-/* State of an `ar_glob' run, passed to `ar_glob_match'.  */
-
-struct ar_glob_state
-  {
-    char *arname;
-    char *pattern;
-    unsigned int size;
-    struct nameseq *chain;
-    unsigned int n;
-  };
-
-/* This function is called by `ar_scan' to match one archive
-   element against the pattern in STATE.  */
-
-static long int
-ar_glob_match (desc, mem, truncated,
-	       hdrpos, datapos, size, date, uid, gid, mode,
-	       state)
-     int desc;
-     char *mem;
-     int truncated;
-     long int hdrpos, datapos, size, date;
-     int uid, gid, mode;
-     struct ar_glob_state *state;
-{
-  if (fnmatch (state->pattern, mem, FNM_PATHNAME|FNM_PERIOD) == 0)
-    {
-      /* We have a match.  Add it to the chain.  */
-      struct nameseq *new = (struct nameseq *) xmalloc (state->size);
-      new->name = concat (state->arname, mem, ")");
-      new->next = state->chain;
-      state->chain = new;
-      ++state->n;
-    }
-
-  return 0L;
-}
-
-/* Return nonzero if PATTERN contains any metacharacters.
-   Metacharacters can be quoted with backslashes if QUOTE is nonzero.  */
-static int
-glob_pattern_p (pattern, quote)
-     const char *pattern;
-     const int quote;
-{
-  register const char *p;
-  int open = 0;
-
-  for (p = pattern; *p != '\0'; ++p)
-    switch (*p)
-      {
-      case '?':
-      case '*':
-	return 1;
-
-      case '\\':
-	if (quote)
-	  ++p;
-	break;
-
-      case '[':
-	open = 1;
-	break;
-
-      case ']':
-	if (open)
-	  return 1;
-	break;
-      }
-
-  return 0;
-}
-
-/* Glob for MEMBER_PATTERN in archive ARNAME.
-   Return a malloc'd chain of matching elements (or nil if none).  */
-
-struct nameseq *
-ar_glob (arname, member_pattern, size)
-     char *arname, *member_pattern;
-     unsigned int size;
-{
-  struct ar_glob_state state;
-  char **names;
-  struct nameseq *n;
-  unsigned int i;
-
-  if (! glob_pattern_p (member_pattern, 1))
-    return 0;
-
-  /* Scan the archive for matches.
-     ar_glob_match will accumulate them in STATE.chain.  */
-  i = strlen (arname);
-  state.arname = (char *) alloca (i + 2);
-  bcopy (arname, state.arname, i);
-  state.arname[i] = '(';
-  state.arname[i + 1] = '\0';
-  state.pattern = member_pattern;
-  state.size = size;
-  state.chain = 0;
-  state.n = 0;
-  (void) ar_scan (arname, ar_glob_match, (long int) &state);
-
-  if (state.chain == 0)
-    return 0;
-
-  /* Now put the names into a vector for sorting.  */
-  names = (char **) alloca (state.n * sizeof (char *));
-  i = 0;
-  for (n = state.chain; n != 0; n = n->next)
-    names[i++] = n->name;
-
-  /* Sort them alphabetically.  */
-  qsort ((char *) names, i, sizeof (*names), alpha_compare);
-
-  /* Put them back into the chain in the sorted order.  */
-  i = 0;
-  for (n = state.chain; n != 0; n = n->next)
-    n->name = names[i++];
-
-  return state.chain;
-}
-
-#endif	/* Not NO_ARCHIVES.  */

buildtools/windows/source/make-3.79.1/arscan.c

@@ -1,857 +0,0 @@
-/* Library function for scanning an archive file.
-Copyright (C) 1987,89,91,92,93,94,95,97 Free Software Foundation, Inc.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-USA.  */
-
-#include "make.h"
-
-#ifdef HAVE_FCNTL_H
-#include <fcntl.h>
-#else
-#include <sys/file.h>
-#endif
-
-#ifndef	NO_ARCHIVES
-
-#ifdef VMS
-#include <lbrdef.h>
-#include <mhddef.h>
-#include <credef.h>
-#include <descrip.h>
-#include <ctype.h>
-#if __DECC
-#include <unixlib.h>
-#include <lbr$routines.h>
-#endif
-
-static void *VMS_lib_idx;
-
-static char *VMS_saved_memname;
-
-static time_t VMS_member_date;
-
-static long int (*VMS_function) ();
-
-static int
-VMS_get_member_info (module, rfa)
-     struct dsc$descriptor_s *module;
-     unsigned long *rfa;
-{
-  int status, i;
-  long int fnval;
-
-  time_t val;
-
-  static struct dsc$descriptor_s bufdesc =
-    { 0, DSC$K_DTYPE_T, DSC$K_CLASS_S, NULL };
-
-  struct mhddef *mhd;
-  char filename[128];
-
-  bufdesc.dsc$a_pointer = filename;
-  bufdesc.dsc$w_length = sizeof (filename);
-
-  status = lbr$set_module (&VMS_lib_idx, rfa, &bufdesc,
-			   &bufdesc.dsc$w_length, 0);
-  if (! status)
-    {
-      error (NILF, _("lbr$set_module failed to extract module info, status = %d"),
-	     status);
-
-      lbr$close (&VMS_lib_idx);
-
-      return 0;
-    }
-
-  mhd = (struct mhddef *) filename;
-
-#ifdef __DECC
-  val = decc$fix_time (&mhd->mhd$l_datim);
-#endif
-
-  for (i = 0; i < module->dsc$w_length; i++)
-    filename[i] = _tolower ((unsigned char)module->dsc$a_pointer[i]);
-
-  filename[i] = '\0';
-
-  VMS_member_date = (time_t) -1;
-
-  fnval =
-    (*VMS_function) (-1, filename, 0, 0, 0, 0, val, 0, 0, 0,
-		     VMS_saved_memname);
-
-  if (fnval)
-    {
-      VMS_member_date = fnval;
-      return 0;
-    }
-  else
-    return 1;
-}
-
-/* Takes three arguments ARCHIVE, FUNCTION and ARG.
-
-   Open the archive named ARCHIVE, find its members one by one,
-   and for each one call FUNCTION with the following arguments:
-     archive file descriptor for reading the data,
-     member name,
-     member name might be truncated flag,
-     member header position in file,
-     member data position in file,
-     member data size,
-     member date,
-     member uid,
-     member gid,
-     member protection mode,
-     ARG.
-
-   NOTE: on VMS systems, only name, date, and arg are meaningful!
-
-   The descriptor is poised to read the data of the member
-   when FUNCTION is called.  It does not matter how much
-   data FUNCTION reads.
-
-   If FUNCTION returns nonzero, we immediately return
-   what FUNCTION returned.
-
-   Returns -1 if archive does not exist,
-   Returns -2 if archive has invalid format.
-   Returns 0 if have scanned successfully.  */
-
-long int
-ar_scan (archive, function, arg)
-     char *archive;
-     long int (*function) ();
-     long int arg;
-{
-  char *p;
-
-  static struct dsc$descriptor_s libdesc =
-    { 0, DSC$K_DTYPE_T, DSC$K_CLASS_S, NULL };
-
-  unsigned long func = LBR$C_READ;
-  unsigned long type = LBR$C_TYP_UNK;
-  unsigned long index = 1;
-
-  int status;
-
-  status = lbr$ini_control (&VMS_lib_idx, &func, &type, 0);
-
-  if (! status)
-    {
-      error (NILF, _("lbr$ini_control failed with status = %d"),status);
-      return -2;
-    }
-
-  libdesc.dsc$a_pointer = archive;
-  libdesc.dsc$w_length = strlen (archive);
-
-  status = lbr$open (&VMS_lib_idx, &libdesc, 0, 0, 0, 0, 0);
-
-  if (! status)
-    {
-      error (NILF, _("unable to open library `%s' to lookup member `%s'"),
-	     archive, (char *)arg);
-      return -1;
-    }
-
-  VMS_saved_memname = (char *)arg;
-
-  /* For comparison, delete .obj from arg name.  */
-
-  p = strrchr (VMS_saved_memname, '.');
-  if (p)
-    *p = '\0';
-
-  VMS_function = function;
-
-  VMS_member_date = (time_t) -1;
-  lbr$get_index (&VMS_lib_idx, &index, VMS_get_member_info, 0);
-
-  /* Undo the damage.  */
-  if (p)
-    *p = '.';
-
-  lbr$close (&VMS_lib_idx);
-
-  return VMS_member_date > 0 ? VMS_member_date : 0;
-}
-
-#else /* !VMS */
-
-/* SCO Unix's compiler defines both of these.  */
-#ifdef	M_UNIX
-#undef	M_XENIX
-#endif
-
-/* On the sun386i and in System V rel 3, ar.h defines two different archive
-   formats depending upon whether you have defined PORTAR (normal) or PORT5AR
-   (System V Release 1).  There is no default, one or the other must be defined
-   to have a nonzero value.  */
-
-#if (!defined (PORTAR) || PORTAR == 0) && (!defined (PORT5AR) || PORT5AR == 0)
-#undef	PORTAR
-#ifdef M_XENIX
-/* According to Jim Sievert <jas1@rsvl.unisys.com>, for SCO XENIX defining
-   PORTAR to 1 gets the wrong archive format, and defining it to 0 gets the
-   right one.  */
-#define PORTAR 0
-#else
-#define PORTAR 1
-#endif
-#endif
-
-/* On AIX, define these symbols to be sure to get both archive formats.
-   AIX 4.3 introduced the "big" archive format to support 64-bit object
-   files, so on AIX 4.3 systems we need to support both the "normal" and
-   "big" archive formats.  An archive's format is indicated in the
-   "fl_magic" field of the "FL_HDR" structure.  For a normal archive,
-   this field will be the string defined by the AIAMAG symbol.  For a
-   "big" archive, it will be the string defined by the AIAMAGBIG symbol
-   (at least on AIX it works this way).
-
-   Note: we'll define these symbols regardless of which AIX version
-   we're compiling on, but this is okay since we'll use the new symbols
-   only if they're present.  */
-#ifdef _AIX
-# define __AR_SMALL__
-# define __AR_BIG__
-#endif
-
-#ifndef WINDOWS32
-# ifndef __BEOS__
-#  include <ar.h>
-# else
-   /* BeOS 5 doesn't have <ar.h> but has archives in the same format
-    * as many other Unices.  This was taken from GNU binutils for BeOS.
-    */
-#  define ARMAG	"!<arch>\n"	/* String that begins an archive file.  */
-#  define SARMAG 8		/* Size of that string.  */
-#  define ARFMAG "`\n"		/* String in ar_fmag at end of each header.  */
-struct ar_hdr
-  {
-    char ar_name[16];		/* Member file name, sometimes / terminated. */
-    char ar_date[12];		/* File date, decimal seconds since Epoch.  */
-    char ar_uid[6], ar_gid[6];	/* User and group IDs, in ASCII decimal.  */
-    char ar_mode[8];		/* File mode, in ASCII octal.  */
-    char ar_size[10];		/* File size, in ASCII decimal.  */
-    char ar_fmag[2];		/* Always contains ARFMAG.  */
-  };
-# endif
-#else
-/* These should allow us to read Windows (VC++) libraries (according to Frank
- * Libbrecht <frankl@abzx.belgium.hp.com>)
- */
-# include <windows.h>
-# include <windef.h>
-# include <io.h>
-# define ARMAG      IMAGE_ARCHIVE_START
-# define SARMAG     IMAGE_ARCHIVE_START_SIZE
-# define ar_hdr     _IMAGE_ARCHIVE_MEMBER_HEADER
-# define ar_name    Name
-# define ar_mode    Mode
-# define ar_size    Size
-# define ar_date    Date
-# define ar_uid     UserID
-# define ar_gid     GroupID
-#endif
-
-/* Cray's <ar.h> apparently defines this.  */
-#ifndef	AR_HDR_SIZE
-# define   AR_HDR_SIZE	(sizeof (struct ar_hdr))
-#endif
-
-/* Takes three arguments ARCHIVE, FUNCTION and ARG.
-
-   Open the archive named ARCHIVE, find its members one by one,
-   and for each one call FUNCTION with the following arguments:
-     archive file descriptor for reading the data,
-     member name,
-     member name might be truncated flag,
-     member header position in file,
-     member data position in file,
-     member data size,
-     member date,
-     member uid,
-     member gid,
-     member protection mode,
-     ARG.
-
-   The descriptor is poised to read the data of the member
-   when FUNCTION is called.  It does not matter how much
-   data FUNCTION reads.
-
-   If FUNCTION returns nonzero, we immediately return
-   what FUNCTION returned.
-
-   Returns -1 if archive does not exist,
-   Returns -2 if archive has invalid format.
-   Returns 0 if have scanned successfully.  */
-
-long int
-ar_scan (archive, function, arg)
-     char *archive;
-     long int (*function) ();
-     long int arg;
-{
-#ifdef AIAMAG
-  FL_HDR fl_header;
-#ifdef AIAMAGBIG
-  int big_archive = 0;
-  FL_HDR_BIG fl_header_big;
-#endif
-#else
-  int long_name = 0;
-#endif
-  char *namemap = 0;
-  register int desc = open (archive, O_RDONLY, 0);
-  if (desc < 0)
-    return -1;
-#ifdef SARMAG
-  {
-    char buf[SARMAG];
-    register int nread = read (desc, buf, SARMAG);
-    if (nread != SARMAG || bcmp (buf, ARMAG, SARMAG))
-      {
-	(void) close (desc);
-	return -2;
-      }
-  }
-#else
-#ifdef AIAMAG
-  {
-    register int nread = read (desc, (char *) &fl_header, FL_HSZ);
-
-    if (nread != FL_HSZ)
-      {
-	(void) close (desc);
-	return -2;
-      }
-#ifdef AIAMAGBIG
-    /* If this is a "big" archive, then set the flag and
-       re-read the header into the "big" structure. */
-    if (!bcmp (fl_header.fl_magic, AIAMAGBIG, SAIAMAG))
-      {
-	big_archive = 1;
-
-	/* seek back to beginning of archive */
-	if (lseek (desc, 0, 0) < 0)
-	  {
-	    (void) close (desc);
-	    return -2;
-	  }
-
-	/* re-read the header into the "big" structure */
-	nread = read (desc, (char *) &fl_header_big, FL_HSZ_BIG);
-	if (nread != FL_HSZ_BIG)
-	  {
-	    (void) close (desc);
-	    return -2;
-	  }
-      }
-    else
-#endif
-       /* Check to make sure this is a "normal" archive. */
-      if (bcmp (fl_header.fl_magic, AIAMAG, SAIAMAG))
-	{
-          (void) close (desc);
-          return -2;
-	}
-  }
-#else
-  {
-#ifndef M_XENIX
-    int buf;
-#else
-    unsigned short int buf;
-#endif
-    register int nread = read(desc, &buf, sizeof (buf));
-    if (nread != sizeof (buf) || buf != ARMAG)
-      {
-	(void) close (desc);
-	return -2;
-      }
-  }
-#endif
-#endif
-
-  /* Now find the members one by one.  */
-  {
-#ifdef SARMAG
-    register long int member_offset = SARMAG;
-#else
-#ifdef AIAMAG
-    long int member_offset;
-    long int last_member_offset;
-
-#ifdef AIAMAGBIG
-    if ( big_archive )
-      {
-	sscanf (fl_header_big.fl_fstmoff, "%20ld", &member_offset);
-	sscanf (fl_header_big.fl_lstmoff, "%20ld", &last_member_offset);
-      }
-    else
-#endif
-      {
-	sscanf (fl_header.fl_fstmoff, "%12ld", &member_offset);
-	sscanf (fl_header.fl_lstmoff, "%12ld", &last_member_offset);
-      }
-
-    if (member_offset == 0)
-      {
-	/* Empty archive.  */
-	close (desc);
-	return 0;
-      }
-#else
-#ifndef	M_XENIX
-    register long int member_offset = sizeof (int);
-#else	/* Xenix.  */
-    register long int member_offset = sizeof (unsigned short int);
-#endif	/* Not Xenix.  */
-#endif
-#endif
-
-    while (1)
-      {
-	register int nread;
-	struct ar_hdr member_header;
-#ifdef AIAMAGBIG
-	struct ar_hdr_big member_header_big;
-#endif
-#ifdef AIAMAG
-	char name[256];
-	int name_len;
-	long int dateval;
-	int uidval, gidval;
-	long int data_offset;
-#else
-	char namebuf[sizeof member_header.ar_name + 1];
-	char *name;
-	int is_namemap;		/* Nonzero if this entry maps long names.  */
-#endif
-	long int eltsize;
-	int eltmode;
-	long int fnval;
-
-	if (lseek (desc, member_offset, 0) < 0)
-	  {
-	    (void) close (desc);
-	    return -2;
-	  }
-
-#ifdef AIAMAG
-#define       AR_MEMHDR_SZ(x) (sizeof(x) - sizeof (x._ar_name))
-
-#ifdef AIAMAGBIG
-	if (big_archive)
-	  {
-	    nread = read (desc, (char *) &member_header_big,
-			  AR_MEMHDR_SZ(member_header_big) );
-
-	    if (nread != AR_MEMHDR_SZ(member_header_big))
-	      {
-		(void) close (desc);
-		return -2;
-	      }
-
-	    sscanf (member_header_big.ar_namlen, "%4d", &name_len);
-	    nread = read (desc, name, name_len);
-
-	    if (nread != name_len)
-	      {
-		(void) close (desc);
-		return -2;
-	      }
-
-	    name[name_len] = 0;
-
-	    sscanf (member_header_big.ar_date, "%12ld", &dateval);
-	    sscanf (member_header_big.ar_uid, "%12d", &uidval);
-	    sscanf (member_header_big.ar_gid, "%12d", &gidval);
-	    sscanf (member_header_big.ar_mode, "%12o", &eltmode);
-	    sscanf (member_header_big.ar_size, "%20ld", &eltsize);
-
-	    data_offset = (member_offset + AR_MEMHDR_SZ(member_header_big)
-			   + name_len + 2);
-	  }
-	else
-#endif
-	  {
-	    nread = read (desc, (char *) &member_header,
-			  AR_MEMHDR_SZ(member_header) );
-
-	    if (nread != AR_MEMHDR_SZ(member_header))
-	      {
-		(void) close (desc);
-		return -2;
-	      }
-
-	    sscanf (member_header.ar_namlen, "%4d", &name_len);
-	    nread = read (desc, name, name_len);
-
-	    if (nread != name_len)
-	      {
-		(void) close (desc);
-		return -2;
-	      }
-
-	    name[name_len] = 0;
-
-	    sscanf (member_header.ar_date, "%12ld", &dateval);
-	    sscanf (member_header.ar_uid, "%12d", &uidval);
-	    sscanf (member_header.ar_gid, "%12d", &gidval);
-	    sscanf (member_header.ar_mode, "%12o", &eltmode);
-	    sscanf (member_header.ar_size, "%12ld", &eltsize);
-
-	    data_offset = (member_offset + AR_MEMHDR_SZ(member_header)
-			   + name_len + 2);
-	  }
-	data_offset += data_offset % 2;
-
-	fnval =
-	  (*function) (desc, name, 0,
-		       member_offset, data_offset, eltsize,
-		       dateval, uidval, gidval,
-		       eltmode, arg);
-
-#else	/* Not AIAMAG.  */
-	nread = read (desc, (char *) &member_header, AR_HDR_SIZE);
-	if (nread == 0)
-	  /* No data left means end of file; that is OK.  */
-	  break;
-
-	if (nread != AR_HDR_SIZE
-#if defined(ARFMAG) || defined(ARFZMAG)
-	    || (
-# ifdef ARFMAG
-                bcmp (member_header.ar_fmag, ARFMAG, 2)
-# else
-                1
-# endif
-                &&
-# ifdef ARFZMAG
-                bcmp (member_header.ar_fmag, ARFZMAG, 2)
-# else
-                1
-# endif
-               )
-#endif
-	    )
-	  {
-	    (void) close (desc);
-	    return -2;
-	  }
-
-	name = namebuf;
-	bcopy (member_header.ar_name, name, sizeof member_header.ar_name);
-	{
-	  register char *p = name + sizeof member_header.ar_name;
-	  do
-	    *p = '\0';
-	  while (p > name && *--p == ' ');
-
-#ifndef AIAMAG
-	  /* If the member name is "//" or "ARFILENAMES/" this may be
-	     a list of file name mappings.  The maximum file name
- 	     length supported by the standard archive format is 14
- 	     characters.  This member will actually always be the
- 	     first or second entry in the archive, but we don't check
- 	     that.  */
- 	  is_namemap = (!strcmp (name, "//")
-			|| !strcmp (name, "ARFILENAMES/"));
-#endif	/* Not AIAMAG. */
-	  /* On some systems, there is a slash after each member name.  */
-	  if (*p == '/')
-	    *p = '\0';
-
-#ifndef AIAMAG
- 	  /* If the member name starts with a space or a slash, this
- 	     is an index into the file name mappings (used by GNU ar).
- 	     Otherwise if the member name looks like #1/NUMBER the
- 	     real member name appears in the element data (used by
- 	     4.4BSD).  */
- 	  if (! is_namemap
- 	      && (name[0] == ' ' || name[0] == '/')
- 	      && namemap != 0)
-	    {
-	      name = namemap + atoi (name + 1);
-	      long_name = 1;
-	    }
- 	  else if (name[0] == '#'
- 		   && name[1] == '1'
- 		   && name[2] == '/')
- 	    {
- 	      int namesize = atoi (name + 3);
-
- 	      name = (char *) alloca (namesize + 1);
- 	      nread = read (desc, name, namesize);
- 	      if (nread != namesize)
- 		{
- 		  close (desc);
- 		  return -2;
- 		}
- 	      name[namesize] = '\0';
-
-	      long_name = 1;
- 	    }
-#endif /* Not AIAMAG. */
-	}
-
-#ifndef	M_XENIX
-	sscanf (member_header.ar_mode, "%o", &eltmode);
-	eltsize = atol (member_header.ar_size);
-#else	/* Xenix.  */
-	eltmode = (unsigned short int) member_header.ar_mode;
-	eltsize = member_header.ar_size;
-#endif	/* Not Xenix.  */
-
-	fnval =
-	  (*function) (desc, name, ! long_name, member_offset,
-		       member_offset + AR_HDR_SIZE, eltsize,
-#ifndef	M_XENIX
-		       atol (member_header.ar_date),
-		       atoi (member_header.ar_uid),
-		       atoi (member_header.ar_gid),
-#else	/* Xenix.  */
-		       member_header.ar_date,
-		       member_header.ar_uid,
-		       member_header.ar_gid,
-#endif	/* Not Xenix.  */
-		       eltmode, arg);
-
-#endif  /* AIAMAG.  */
-
-	if (fnval)
-	  {
-	    (void) close (desc);
-	    return fnval;
-	  }
-
-#ifdef AIAMAG
-	if (member_offset == last_member_offset)
-	  /* End of the chain.  */
-	  break;
-
-#ifdef AIAMAGBIG
-	if (big_archive)
-          sscanf (member_header_big.ar_nxtmem, "%20ld", &member_offset);
-	else
-#endif
-	  sscanf (member_header.ar_nxtmem, "%12ld", &member_offset);
-
-	if (lseek (desc, member_offset, 0) != member_offset)
-	  {
-	    (void) close (desc);
-	    return -2;
-	  }
-#else
-
- 	/* If this member maps archive names, we must read it in.  The
- 	   name map will always precede any members whose names must
- 	   be mapped.  */
-	if (is_namemap)
- 	  {
- 	    char *clear;
- 	    char *limit;
-
- 	    namemap = (char *) alloca (eltsize);
- 	    nread = read (desc, namemap, eltsize);
- 	    if (nread != eltsize)
- 	      {
- 		(void) close (desc);
- 		return -2;
- 	      }
-
- 	    /* The names are separated by newlines.  Some formats have
- 	       a trailing slash.  Null terminate the strings for
- 	       convenience.  */
- 	    limit = namemap + eltsize;
- 	    for (clear = namemap; clear < limit; clear++)
- 	      {
- 		if (*clear == '\n')
- 		  {
- 		    *clear = '\0';
- 		    if (clear[-1] == '/')
- 		      clear[-1] = '\0';
- 		  }
- 	      }
-
-	    is_namemap = 0;
- 	  }
-
-	member_offset += AR_HDR_SIZE + eltsize;
-	if (member_offset % 2 != 0)
-	  member_offset++;
-#endif
-      }
-  }
-
-  close (desc);
-  return 0;
-}
-#endif /* !VMS */
-
-/* Return nonzero iff NAME matches MEM.
-   If TRUNCATED is nonzero, MEM may be truncated to
-   sizeof (struct ar_hdr.ar_name) - 1.  */
-
-int
-ar_name_equal (name, mem, truncated)
-     char *name, *mem;
-     int truncated;
-{
-  char *p;
-
-  p = strrchr (name, '/');
-  if (p != 0)
-    name = p + 1;
-
-#ifndef VMS
-  if (truncated)
-    {
-#ifdef AIAMAG
-      /* TRUNCATED should never be set on this system.  */
-      abort ();
-#else
-      struct ar_hdr hdr;
-#if !defined (__hpux) && !defined (cray)
-      return strneq (name, mem, sizeof(hdr.ar_name) - 1);
-#else
-      return strneq (name, mem, sizeof(hdr.ar_name) - 2);
-#endif /* !__hpux && !cray */
-#endif /* !AIAMAG */
-    }
-#endif /* !VMS */
-
-  return !strcmp (name, mem);
-}
-
-#ifndef VMS
-/* ARGSUSED */
-static long int
-ar_member_pos (desc, mem, truncated,
-	       hdrpos, datapos, size, date, uid, gid, mode, name)
-     int desc;
-     char *mem;
-     int truncated;
-     long int hdrpos, datapos, size, date;
-     int uid, gid, mode;
-     char *name;
-{
-  if (!ar_name_equal (name, mem, truncated))
-    return 0;
-  return hdrpos;
-}
-
-/* Set date of member MEMNAME in archive ARNAME to current time.
-   Returns 0 if successful,
-   -1 if file ARNAME does not exist,
-   -2 if not a valid archive,
-   -3 if other random system call error (including file read-only),
-   1 if valid but member MEMNAME does not exist.  */
-
-int
-ar_member_touch (arname, memname)
-     char *arname, *memname;
-{
-  register long int pos = ar_scan (arname, ar_member_pos, (long int) memname);
-  register int fd;
-  struct ar_hdr ar_hdr;
-  register int i;
-  struct stat statbuf;
-
-  if (pos < 0)
-    return (int) pos;
-  if (!pos)
-    return 1;
-
-  fd = open (arname, O_RDWR, 0666);
-  if (fd < 0)
-    return -3;
-  /* Read in this member's header */
-  if (lseek (fd, pos, 0) < 0)
-    goto lose;
-  if (AR_HDR_SIZE != read (fd, (char *) &ar_hdr, AR_HDR_SIZE))
-    goto lose;
-  /* Write back the header, thus touching the archive file.  */
-  if (lseek (fd, pos, 0) < 0)
-    goto lose;
-  if (AR_HDR_SIZE != write (fd, (char *) &ar_hdr, AR_HDR_SIZE))
-    goto lose;
-  /* The file's mtime is the time we we want.  */
-  while (fstat (fd, &statbuf) < 0 && EINTR_SET)
-    ;
-#if defined(ARFMAG) || defined(ARFZMAG) || defined(AIAMAG) || defined(WINDOWS32)
-  /* Advance member's time to that time */
-  for (i = 0; i < sizeof ar_hdr.ar_date; i++)
-    ar_hdr.ar_date[i] = ' ';
-  sprintf (ar_hdr.ar_date, "%ld", (long int) statbuf.st_mtime);
-#ifdef AIAMAG
-  ar_hdr.ar_date[strlen(ar_hdr.ar_date)] = ' ';
-#endif
-#else
-  ar_hdr.ar_date = statbuf.st_mtime;
-#endif
-  /* Write back this member's header */
-  if (lseek (fd, pos, 0) < 0)
-    goto lose;
-  if (AR_HDR_SIZE != write (fd, (char *) &ar_hdr, AR_HDR_SIZE))
-    goto lose;
-  close (fd);
-  return 0;
-
- lose:
-  i = errno;
-  close (fd);
-  errno = i;
-  return -3;
-}
-#endif
-
-#ifdef TEST
-
-long int
-describe_member (desc, name, truncated,
-		 hdrpos, datapos, size, date, uid, gid, mode)
-     int desc;
-     char *name;
-     int truncated;
-     long int hdrpos, datapos, size, date;
-     int uid, gid, mode;
-{
-  extern char *ctime ();
-
-  printf (_("Member `%s'%s: %ld bytes at %ld (%ld).\n"),
-	  name, truncated ? _(" (name might be truncated)") : "",
-	  size, hdrpos, datapos);
-  printf (_("  Date %s"), ctime (&date));
-  printf (_("  uid = %d, gid = %d, mode = 0%o.\n"), uid, gid, mode);
-
-  return 0;
-}
-
-main (argc, argv)
-     int argc;
-     char **argv;
-{
-  ar_scan (argv[1], describe_member);
-  return 0;
-}
-
-#endif	/* TEST.  */
-
-#endif	/* NO_ARCHIVES.  */

buildtools/windows/source/make-3.79.1/build.sh.in

@@ -1,80 +0,0 @@
-#!/bin/sh
-# Shell script to build GNU Make in the absence of any `make' program.
-# @configure_input@
-
-# Copyright (C) 1993, 1994, 1997 Free Software Foundation, Inc.
-# This file is part of GNU Make.
-#
-# GNU Make is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# GNU Make is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Make; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# See Makefile.in for comments describing these variables.
-
-srcdir='@srcdir@'
-CC='@CC@'
-CFLAGS='@CFLAGS@'
-CPPFLAGS='@CPPFLAGS@'
-LDFLAGS='@LDFLAGS@'
-ALLOCA='@ALLOCA@'
-LOADLIBES='@LIBS@'
-extras='@LIBOBJS@'
-REMOTE='@REMOTE@'
-GLOBLIB='@GLOBLIB@'
-
-# Common prefix for machine-independent installed files.
-prefix='@prefix@'
-# Common prefix for machine-dependent installed files.
-exec_prefix=`eval echo @exec_prefix@`
-# Directory to find libraries in for `-lXXX'.
-libdir=${exec_prefix}/lib
-# Directory to search by default for included makefiles.
-includedir=${prefix}/include
-
-localedir=${prefix}/share/locale
-aliaspath=${localedir}:.
-
-defines="-DALIASPATH=\"${aliaspath}\" -DLOCALEDIR=\"${localedir}\" -DLIBDIR=\"${libdir}\" -DINCLUDEDIR=\"${includedir}\""' @DEFS@'
-
-# Exit as soon as any command fails.
-set -e
-
-# These are all the objects we need to link together.
-objs="ar.o arscan.o commands.o dir.o expand.o file.o function.o getopt.o implicit.o job.o main.o misc.o read.o remake.o rule.o signame.o variable.o vpath.o default.o version.o getopt1.o remote-${REMOTE}.o ${extras} ${ALLOCA}"
-
-if [ x"$GLOBLIB" != x ]; then
-  objs="$objs glob/fnmatch.o glob/glob.o"
-  globinc=-I${srcdir}/glob
-fi
-
-# Compile the source files into those objects.
-for file in `echo ${objs} | sed 's/\.o/.c/g'`; do
-  echo compiling ${file}...
-  $CC $defines $CPPFLAGS $CFLAGS \
-      -c -I. -I${srcdir} ${globinc} ${srcdir}/$file
-done
-
-# The object files were actually all put in the current directory.
-# Remove the source directory names from the list.
-srcobjs="$objs"
-objs=
-for obj in $srcobjs; do
-  objs="$objs `basename $obj`"
-done
-
-# Link all the objects together.
-echo linking make...
-$CC $LDFLAGS $objs $LOADLIBES -o make.new
-echo done
-mv -f make.new make

buildtools/windows/source/make-3.79.1/build_w32.bat

@@ -1,137 +0,0 @@
-set make=gnumake
-cd w32\subproc
-echo "Creating the subproc library"
-%ComSpec% /c build.bat
-cd ..\..
-del link.dbg link.rel
-del config.h
-copy config.h.W32 config.h
-echo off
-echo "Creating GNU make for Windows 95/NT"
-echo on
-if not exist .\WinDebug\nul mkdir .\WinDebug
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D TIVOLI /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c variable.c
-echo WinDebug\variable.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c rule.c
-echo WinDebug\rule.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c remote-stub.c
-echo WinDebug\remote-stub.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c commands.c
-echo WinDebug\commands.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c file.c
-echo WinDebug\file.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c getloadavg.c
-echo WinDebug\getloadavg.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c default.c
-echo WinDebug\default.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c signame.c
-echo WinDebug\signame.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c expand.c
-echo WinDebug\expand.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c dir.c
-echo WinDebug\dir.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c main.c
-echo WinDebug\main.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c getopt1.c
-echo WinDebug\getopt1.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c job.c
-echo WinDebug\job.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c read.c
-echo WinDebug\read.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c version.c
-echo WinDebug\version.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c getopt.c
-echo WinDebug\getopt.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c arscan.c
-echo WinDebug\arscan.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c remake.c
-echo WinDebug\remake.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c misc.c
-echo WinDebug\misc.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c ar.c
-echo WinDebug\ar.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c function.c
-echo WinDebug\function.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c vpath.c
-echo WinDebug\vpath.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c implicit.c
-echo WinDebug\implicit.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\w32\compat\dirent.c
-echo WinDebug\dirent.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\glob\glob.c
-echo WinDebug\glob.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\glob\fnmatch.c
-echo WinDebug\fnmatch.obj >>link.dbg
-cl.exe /nologo /MT /W3 /GX /Zi /YX /Od /I . /I glob /I w32/include /D _DEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinDebug/ /Fp.\WinDebug/%make%.pch /Fo.\WinDebug/ /Fd.\WinDebug/%make%.pdb /c  .\w32\pathstuff.c
-echo WinDebug\pathstuff.obj >>link.dbg
-echo off
-echo "Linking WinDebug/%make%.exe"
-rem link.exe kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\windebug\subproc.lib /NOLOGO /SUBSYSTEM:console /INCREMENTAL:yes /PDB:.\WinDebug/%make%.pdb /DEBUG /MACHINE:I386 /OUT:.\WinDebug/%make%.exe .\WinDebug/variable.obj  .\WinDebug/rule.obj  .\WinDebug/remote-stub.obj  .\WinDebug/commands.obj  .\WinDebug/file.obj  .\WinDebug/getloadavg.obj  .\WinDebug/default.obj  .\WinDebug/signame.obj  .\WinDebug/expand.obj  .\WinDebug/dir.obj  .\WinDebug/main.obj  .\WinDebug/getopt1.obj  .\WinDebug/job.obj  .\WinDebug/read.obj  .\WinDebug/version.obj  .\WinDebug/getopt.obj  .\WinDebug/arscan.obj  .\WinDebug/remake.obj  .\WinDebug/misc.obj  .\WinDebug/ar.obj  .\WinDebug/function.obj  .\WinDebug/vpath.obj  .\WinDebug/implicit.obj  .\WinDebug/dirent.obj  .\WinDebug/glob.obj  .\WinDebug/fnmatch.obj  .\WinDebug/pathstuff.obj
-echo kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\windebug\subproc.lib >>link.dbg
-link.exe /NOLOGO /SUBSYSTEM:console /INCREMENTAL:yes /PDB:.\WinDebug/%make%.pdb /DEBUG /MACHINE:I386 /OUT:.\WinDebug/%make%.exe @link.dbg
-if not exist .\WinDebug/%make%.exe echo "WinDebug build failed"
-if exist .\WinDebug/%make%.exe echo "WinDebug build succeeded!"
-if not exist .\WinRel\nul mkdir .\WinRel
-echo on
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /D TIVOLI /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c variable.c
-echo WinRel\variable.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c rule.c
-echo WinRel\rule.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c remote-stub.c
-echo WinRel\remote-stub.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c commands.c
-echo WinRel\commands.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c file.c
-echo WinRel\file.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c getloadavg.c
-echo WinRel\getloadavg.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c default.c
-echo WinRel\default.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c signame.c
-echo WinRel\signame.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c expand.c
-echo WinRel\expand.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c dir.c
-echo WinRel\dir.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c main.c
-echo WinRel\main.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c getopt1.c
-echo WinRel\getopt1.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c job.c
-echo WinRel\job.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c read.c
-echo WinRel\read.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c version.c
-echo WinRel\version.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c getopt.c
-echo WinRel\getopt.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c arscan.c
-echo WinRel\arscan.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c remake.c
-echo WinRel\remake.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c misc.c
-echo WinRel\misc.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c ar.c
-echo WinRel\ar.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c function.c
-echo WinRel\function.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c vpath.c
-echo WinRel\vpath.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c implicit.c
-echo WinRel\implicit.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\w32\compat\dirent.c
-echo WinRel\dirent.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\glob\glob.c
-echo WinRel\glob.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\glob\fnmatch.c
-echo WinRel\fnmatch.obj >>link.rel
-cl.exe /nologo /MT /W3 /GX /YX /O2 /I . /I glob /I w32/include /D NDEBUG /D WINDOWS32 /D WIN32 /D _CONSOLE /D HAVE_CONFIG_H /FR.\WinRel/ /Fp.\WinRel/%make%.pch /Fo.\WinRel/ /c  .\w32\pathstuff.c
-echo WinRel\pathstuff.obj >>link.rel
-echo off
-echo "Linking WinRel/%make%.exe"
-rem link.exe kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\winrel\subproc.lib /NOLOGO /SUBSYSTEM:console /INCREMENTAL:no /PDB:.\WinRel/%make%.pdb /MACHINE:I386 /OUT:.\WinRel/%make%.exe .\WinRel/variable.obj  .\WinRel/rule.obj  .\WinRel/remote-stub.obj  .\WinRel/commands.obj  .\WinRel/file.obj  .\WinRel/getloadavg.obj  .\WinRel/default.obj  .\WinRel/signame.obj  .\WinRel/expand.obj  .\WinRel/dir.obj  .\WinRel/main.obj  .\WinRel/getopt1.obj  .\WinRel/job.obj  .\WinRel/read.obj  .\WinRel/version.obj  .\WinRel/getopt.obj  .\WinRel/arscan.obj  .\WinRel/remake.obj  .\WinRel/misc.obj  .\WinRel/ar.obj  .\WinRel/function.obj  .\WinRel/vpath.obj  .\WinRel/implicit.obj  .\WinRel/dirent.obj  .\WinRel/glob.obj  .\WinRel/fnmatch.obj  .\WinRel/pathstuff.obj
-echo kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib w32\subproc\winrel\subproc.lib >>link.rel
-link.exe /NOLOGO /SUBSYSTEM:console /INCREMENTAL:no /PDB:.\WinRel/%make%.pdb /MACHINE:I386 /OUT:.\WinRel/%make%.exe @link.rel
-if not exist .\WinRel/%make%.exe echo "WinRel build failed"
-if exist .\WinRel/%make%.exe echo "WinRel build succeeded!"
-echo on

buildtools/windows/source/make-3.79.1/commands.c

@@ -1,565 +0,0 @@
-/* Command processing for GNU Make.
-Copyright (C) 1988,89,91,92,93,94,95,96,97 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU Make is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#include "make.h"
-#include "dep.h"
-#include "filedef.h"
-#include "variable.h"
-#include "job.h"
-#include "commands.h"
-
-extern int remote_kill PARAMS ((int id, int sig));
-
-#ifndef	HAVE_UNISTD_H
-extern int getpid ();
-#endif
-
-/* Set FILE's automatic variables up.  */
-
-static void
-set_file_variables (file)
-     register struct file *file;
-{
-  register char *p;
-  char *at, *percent, *star, *less;
-
-#ifndef	NO_ARCHIVES
-  /* If the target is an archive member `lib(member)',
-     then $@ is `lib' and $% is `member'.  */
-
-  if (ar_name (file->name))
-    {
-      unsigned int len;
-      p = strchr (file->name, '(');
-      at = (char *) alloca (p - file->name + 1);
-      bcopy (file->name, at, p - file->name);
-      at[p - file->name] = '\0';
-      len = strlen (p + 1);
-      percent = (char *) alloca (len);
-      bcopy (p + 1, percent, len - 1);
-      percent[len - 1] = '\0';
-    }
-  else
-#endif	/* NO_ARCHIVES.  */
-    {
-      at = file->name;
-      percent = "";
-    }
-
-  /* $* is the stem from an implicit or static pattern rule.  */
-  if (file->stem == 0)
-    {
-      /* In Unix make, $* is set to the target name with
-	 any suffix in the .SUFFIXES list stripped off for
-	 explicit rules.  We store this in the `stem' member.  */
-      register struct dep *d;
-      char *name;
-      unsigned int len;
-
-#ifndef	NO_ARCHIVES
-      if (ar_name (file->name))
-	{
-	  name = strchr (file->name, '(') + 1;
-	  len = strlen (name) - 1;
-	}
-      else
-#endif
-	{
-	  name = file->name;
-	  len = strlen (name);
-	}
-
-      for (d = enter_file (".SUFFIXES")->deps; d != 0; d = d->next)
-	{
-	  unsigned int slen = strlen (dep_name (d));
-	  if (len > slen && strneq (dep_name (d), name + (len - slen), slen))
-	    {
-	      file->stem = savestring (name, len - slen);
-	      break;
-	    }
-	}
-      if (d == 0)
-	file->stem = "";
-    }
-  star = file->stem;
-
-  /* $< is the first dependency.  */
-  less = file->deps != 0 ? dep_name (file->deps) : "";
-
-  if (file->cmds == default_file->cmds)
-    /* This file got its commands from .DEFAULT.
-       In this case $< is the same as $@.  */
-    less = at;
-
-#define	DEFINE_VARIABLE(name, len, value) \
-  (void) define_variable_for_file (name,len,value,o_automatic,0,file)
-
-  /* Define the variables.  */
-
-  DEFINE_VARIABLE ("<", 1, less);
-  DEFINE_VARIABLE ("*", 1, star);
-  DEFINE_VARIABLE ("@", 1, at);
-  DEFINE_VARIABLE ("%", 1, percent);
-
-  /* Compute the values for $^, $+, and $?.  */
-
-  {
-    register unsigned int qmark_len, plus_len;
-    char *caret_value, *plus_value;
-    register char *cp;
-    char *qmark_value;
-    register char *qp;
-    register struct dep *d;
-    unsigned int len;
-
-    /* Compute first the value for $+, which is supposed to contain
-       duplicate dependencies as they were listed in the makefile.  */
-
-    plus_len = 0;
-    for (d = file->deps; d != 0; d = d->next)
-      plus_len += strlen (dep_name (d)) + 1;
-
-    len = plus_len == 0 ? 1 : plus_len;
-    cp = plus_value = (char *) alloca (len);
-
-    qmark_len = plus_len;	/* Will be this or less.  */
-    for (d = file->deps; d != 0; d = d->next)
-      {
-	char *c = dep_name (d);
-
-#ifndef	NO_ARCHIVES
-	if (ar_name (c))
-	  {
-	    c = strchr (c, '(') + 1;
-	    len = strlen (c) - 1;
-	  }
-	else
-#endif
-	  len = strlen (c);
-
-	bcopy (c, cp, len);
-	cp += len;
-#if VMS
-        *cp++ = ',';
-#else
-	*cp++ = ' ';
-#endif
-	if (! d->changed)
-	  qmark_len -= len + 1;	/* Don't space in $? for this one.  */
-      }
-
-    /* Kill the last space and define the variable.  */
-
-    cp[cp > plus_value ? -1 : 0] = '\0';
-    DEFINE_VARIABLE ("+", 1, plus_value);
-
-    /* Make sure that no dependencies are repeated.  This does not
-       really matter for the purpose of updating targets, but it
-       might make some names be listed twice for $^ and $?.  */
-
-    uniquize_deps (file->deps);
-
-    /* Compute the values for $^ and $?.  */
-
-    cp = caret_value = plus_value; /* Reuse the buffer; it's big enough.  */
-    len = qmark_len == 0 ? 1 : qmark_len;
-    qp = qmark_value = (char *) alloca (len);
-
-    for (d = file->deps; d != 0; d = d->next)
-      {
-	char *c = dep_name (d);
-
-#ifndef	NO_ARCHIVES
-	if (ar_name (c))
-	  {
-	    c = strchr (c, '(') + 1;
-	    len = strlen (c) - 1;
-	  }
-	else
-#endif
-	  len = strlen (c);
-
-	bcopy (c, cp, len);
-	cp += len;
-#if VMS
-	*cp++ = ',';
-#else
-	*cp++ = ' ';
-#endif
-	if (d->changed)
-	  {
-	    bcopy (c, qp, len);
-	    qp += len;
-#if VMS
-	    *qp++ = ',';
-#else
-	    *qp++ = ' ';
-#endif
-	  }
-      }
-
-    /* Kill the last spaces and define the variables.  */
-
-    cp[cp > caret_value ? -1 : 0] = '\0';
-    DEFINE_VARIABLE ("^", 1, caret_value);
-
-    qp[qp > qmark_value ? -1 : 0] = '\0';
-    DEFINE_VARIABLE ("?", 1, qmark_value);
-  }
-
-#undef	DEFINE_VARIABLE
-}
-
-/* Chop CMDS up into individual command lines if necessary.
-   Also set the `lines_flag' and `any_recurse' members.  */
-
-void
-chop_commands (cmds)
-     register struct commands *cmds;
-{
-  register char *p;
-  unsigned int nlines, idx;
-  char **lines;
-
-  /* If we don't have any commands,
-     or we already parsed them, never mind.  */
-
-  if (!cmds || cmds->command_lines != 0)
-    return;
-
-  /* Chop CMDS->commands up into lines in CMDS->command_lines.
-	 Also set the corresponding CMDS->lines_flags elements,
-	 and the CMDS->any_recurse flag.  */
-
-  nlines = 5;
-  lines = (char **) xmalloc (5 * sizeof (char *));
-  idx = 0;
-  p = cmds->commands;
-  while (*p != '\0')
-    {
-      char *end = p;
-    find_end:;
-      end = strchr (end, '\n');
-      if (end == 0)
-        end = p + strlen (p);
-      else if (end > p && end[-1] == '\\')
-        {
-          int backslash = 1;
-          register char *b;
-          for (b = end - 2; b >= p && *b == '\\'; --b)
-            backslash = !backslash;
-          if (backslash)
-            {
-              ++end;
-              goto find_end;
-            }
-        }
-
-      if (idx == nlines)
-        {
-          nlines += 2;
-          lines = (char **) xrealloc ((char *) lines,
-                                      nlines * sizeof (char *));
-        }
-      lines[idx++] = savestring (p, end - p);
-      p = end;
-      if (*p != '\0')
-        ++p;
-    }
-
-  if (idx != nlines)
-    {
-      nlines = idx;
-      lines = (char **) xrealloc ((char *) lines,
-                                  nlines * sizeof (char *));
-    }
-
-  cmds->ncommand_lines = nlines;
-  cmds->command_lines = lines;
-
-  cmds->any_recurse = 0;
-  cmds->lines_flags = (char *) xmalloc (nlines);
-  for (idx = 0; idx < nlines; ++idx)
-    {
-      int flags = 0;
-
-      for (p = lines[idx];
-           isblank ((unsigned char)*p) || *p == '-' || *p == '@' || *p == '+';
-           ++p)
-        switch (*p)
-          {
-          case '+':
-            flags |= COMMANDS_RECURSE;
-            break;
-          case '@':
-            flags |= COMMANDS_SILENT;
-            break;
-          case '-':
-            flags |= COMMANDS_NOERROR;
-            break;
-          }
-      if (!(flags & COMMANDS_RECURSE))
-        {
-          unsigned int len = strlen (p);
-          if (sindex (p, len, "$(MAKE)", 7) != 0
-              || sindex (p, len, "${MAKE}", 7) != 0)
-            flags |= COMMANDS_RECURSE;
-        }
-
-      cmds->lines_flags[idx] = flags;
-      cmds->any_recurse |= flags & COMMANDS_RECURSE;
-    }
-}
-
-/* Execute the commands to remake FILE.  If they are currently executing,
-   return or have already finished executing, just return.  Otherwise,
-   fork off a child process to run the first command line in the sequence.  */
-
-void
-execute_file_commands (file)
-     struct file *file;
-{
-  register char *p;
-
-  /* Don't go through all the preparations if
-     the commands are nothing but whitespace.  */
-
-  for (p = file->cmds->commands; *p != '\0'; ++p)
-    if (!isspace ((unsigned char)*p) && *p != '-' && *p != '@')
-      break;
-  if (*p == '\0')
-    {
-      /* If there are no commands, assume everything worked.  */
-      set_command_state (file, cs_running);
-      file->update_status = 0;
-      notice_finished_file (file);
-      return;
-    }
-
-  /* First set the automatic variables according to this file.  */
-
-  initialize_file_variables (file, 0);
-
-  set_file_variables (file);
-
-  /* Start the commands running.  */
-  new_job (file);
-}
-
-/* This is set while we are inside fatal_error_signal,
-   so things can avoid nonreentrant operations.  */
-
-int handling_fatal_signal = 0;
-
-/* Handle fatal signals.  */
-
-RETSIGTYPE
-fatal_error_signal (sig)
-     int sig;
-{
-#ifdef __MSDOS__
-  extern int dos_status, dos_command_running;
-
-  if (dos_command_running)
-    {
-      /* That was the child who got the signal, not us.  */
-      dos_status |= (sig << 8);
-      return;
-    }
-  remove_intermediates (1);
-  exit (EXIT_FAILURE);
-#else /* not __MSDOS__ */
-#ifdef _AMIGA
-  remove_intermediates (1);
-  if (sig == SIGINT)
-     fputs (_("*** Break.\n"), stderr);
-
-  exit (10);
-#else /* not Amiga */
-  handling_fatal_signal = 1;
-
-  /* Set the handling for this signal to the default.
-     It is blocked now while we run this handler.  */
-  signal (sig, SIG_DFL);
-
-  /* A termination signal won't be sent to the entire
-     process group, but it means we want to kill the children.  */
-
-  if (sig == SIGTERM)
-    {
-      register struct child *c;
-      for (c = children; c != 0; c = c->next)
-	if (!c->remote)
-	  (void) kill (c->pid, SIGTERM);
-    }
-
-  /* If we got a signal that means the user
-     wanted to kill make, remove pending targets.  */
-
-  if (sig == SIGTERM || sig == SIGINT
-#ifdef SIGHUP
-    || sig == SIGHUP
-#endif
-#ifdef SIGQUIT
-    || sig == SIGQUIT
-#endif
-    )
-    {
-      register struct child *c;
-
-      /* Remote children won't automatically get signals sent
-	 to the process group, so we must send them.  */
-      for (c = children; c != 0; c = c->next)
-	if (c->remote)
-	  (void) remote_kill (c->pid, sig);
-
-      for (c = children; c != 0; c = c->next)
-	delete_child_targets (c);
-
-      /* Clean up the children.  We don't just use the call below because
-	 we don't want to print the "Waiting for children" message.  */
-      while (job_slots_used > 0)
-	reap_children (1, 0);
-    }
-  else
-    /* Wait for our children to die.  */
-    while (job_slots_used > 0)
-      reap_children (1, 1);
-
-  /* Delete any non-precious intermediate files that were made.  */
-
-  remove_intermediates (1);
-
-#ifdef SIGQUIT
-  if (sig == SIGQUIT)
-    /* We don't want to send ourselves SIGQUIT, because it will
-       cause a core dump.  Just exit instead.  */
-    exit (EXIT_FAILURE);
-#endif
-
-  /* Signal the same code; this time it will really be fatal.  The signal
-     will be unblocked when we return and arrive then to kill us.  */
-  if (kill (getpid (), sig) < 0)
-    pfatal_with_name ("kill");
-#endif /* not Amiga */
-#endif /* not __MSDOS__  */
-}
-
-/* Delete FILE unless it's precious or not actually a file (phony),
-   and it has changed on disk since we last stat'd it.  */
-
-static void
-delete_target (file, on_behalf_of)
-     struct file *file;
-     char *on_behalf_of;
-{
-  struct stat st;
-
-  if (file->precious || file->phony)
-    return;
-
-#ifndef NO_ARCHIVES
-  if (ar_name (file->name))
-    {
-      time_t file_date = (file->last_mtime == NONEXISTENT_MTIME
-			  ? (time_t) -1
-			  : (time_t) FILE_TIMESTAMP_S (file->last_mtime));
-      if (ar_member_date (file->name) != file_date)
-	{
-	  if (on_behalf_of)
-	    error (NILF, _("*** [%s] Archive member `%s' may be bogus; not deleted"),
-		   on_behalf_of, file->name);
-	  else
-	    error (NILF, _("*** Archive member `%s' may be bogus; not deleted"),
-		   file->name);
-	}
-      return;
-    }
-#endif
-
-  if (stat (file->name, &st) == 0
-      && S_ISREG (st.st_mode)
-      && FILE_TIMESTAMP_STAT_MODTIME (file->name, st) != file->last_mtime)
-    {
-      if (on_behalf_of)
-	error (NILF, _("*** [%s] Deleting file `%s'"), on_behalf_of, file->name);
-      else
-	error (NILF, _("*** Deleting file `%s'"), file->name);
-      if (unlink (file->name) < 0
-	  && errno != ENOENT)	/* It disappeared; so what.  */
-	perror_with_name ("unlink: ", file->name);
-    }
-}
-
-
-/* Delete all non-precious targets of CHILD unless they were already deleted.
-   Set the flag in CHILD to say they've been deleted.  */
-
-void
-delete_child_targets (child)
-     struct child *child;
-{
-  struct dep *d;
-
-  if (child->deleted)
-    return;
-
-  /* Delete the target file if it changed.  */
-  delete_target (child->file, (char *) 0);
-
-  /* Also remove any non-precious targets listed in the `also_make' member.  */
-  for (d = child->file->also_make; d != 0; d = d->next)
-    delete_target (d->file, child->file->name);
-
-  child->deleted = 1;
-}
-
-/* Print out the commands in CMDS.  */
-
-void
-print_commands (cmds)
-     register struct commands *cmds;
-{
-  register char *s;
-
-  fputs (_("#  commands to execute"), stdout);
-
-  if (cmds->fileinfo.filenm == 0)
-    puts (_(" (built-in):"));
-  else
-    printf (_(" (from `%s', line %lu):\n"),
-            cmds->fileinfo.filenm, cmds->fileinfo.lineno);
-
-  s = cmds->commands;
-  while (*s != '\0')
-    {
-      char *end;
-
-      while (isspace ((unsigned char)*s))
-	++s;
-
-      end = strchr (s, '\n');
-      if (end == 0)
-	end = s + strlen (s);
-
-      printf ("\t%.*s\n", (int) (end - s), s);
-
-      s = end;
-    }
-}

buildtools/windows/source/make-3.79.1/commands.h

@@ -1,42 +0,0 @@
-/* Definition of data structures describing shell commands for GNU Make.
-Copyright (C) 1988, 1989, 1991, 1993 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU Make is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* Structure that gives the commands to make a file
-   and information about where these commands came from.  */
-
-struct commands
-  {
-    struct floc fileinfo;	/* Where commands were defined.  */
-    char *commands;		/* Commands text.  */
-    unsigned int ncommand_lines;/* Number of command lines.  */
-    char **command_lines;	/* Commands chopped up into lines.  */
-    char *lines_flags;		/* One set of flag bits for each line.  */
-    int any_recurse;		/* Nonzero if any `lines_recurse' elt has */
-				/* the COMMANDS_RECURSE bit set.  */
-  };
-
-/* Bits in `lines_flags'.  */
-#define	COMMANDS_RECURSE	1 /* Recurses: + or $(MAKE).  */
-#define	COMMANDS_SILENT		2 /* Silent: @.  */
-#define	COMMANDS_NOERROR	4 /* No errors: -.  */
-
-extern void execute_file_commands PARAMS ((struct file *file));
-extern void print_commands PARAMS ((struct commands *cmds));
-extern void delete_child_targets PARAMS ((struct child *child));
-extern void chop_commands PARAMS ((struct commands *cmds));

buildtools/windows/source/make-3.79.1/config.ami

@@ -1,317 +0,0 @@
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define if on AIX 3.
-   System headers sometimes define this.
-   We just want to avoid a redefinition error message.	*/
-#ifndef _ALL_SOURCE
-/* #undef _ALL_SOURCE */
-#endif
-
-/* Define if using alloca.c.  */
-#define C_ALLOCA
-
-/* Define if the closedir function returns void instead of int.  */
-/* #undef CLOSEDIR_VOID */
-
-/* Define to empty if the keyword does not work.  */
-/* #undef const */
-
-/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
-   This function is required for alloca.c support on those systems.  */
-/* #undef CRAY_STACKSEG_END */
-
-/* Define for DGUX with <sys/dg_sys_info.h>.  */
-/* #undef DGUX */
-
-/* Define if the `getloadavg' function needs to be run setuid or setgid.  */
-/* #undef GETLOADAVG_PRIVILEGED */
-
-/* Define to `unsigned long' or `unsigned long long'
-   if <inttypes.h> doesn't define.  */
-#define uintmax_t unsigned long
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#define gid_t int
-
-/* Define if you have alloca, as a function or macro.  */
-/* #undef HAVE_ALLOCA */
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
-/* #undef HAVE_ALLOCA_H */
-
-/* Define if you don't have vprintf but do have _doprnt.  */
-/* #undef HAVE_DOPRNT */
-
-/* Define if your system has a working fnmatch function.  */
-/* #undef HAVE_FNMATCH */
-
-/* Define if your system has its own `getloadavg' function.  */
-/* #undef HAVE_GETLOADAVG */
-
-/* Define if you have the getmntent function.  */
-/* #undef HAVE_GETMNTENT */
-
-/* Define if the `long double' type works.  */
-/* #undef HAVE_LONG_DOUBLE */
-
-/* Define if you support file names longer than 14 characters.	*/
-#define HAVE_LONG_FILE_NAMES 1
-
-/* Define if you have a working `mmap' system call.  */
-/* #undef HAVE_MMAP */
-
-/* Define if system calls automatically restart after interruption
-   by a signal.  */
-/* #undef HAVE_RESTARTABLE_SYSCALLS */
-
-/* Define if your struct stat has st_blksize.  */
-/* #undef HAVE_ST_BLKSIZE */
-
-/* Define if your struct stat has st_blocks.  */
-/* #undef HAVE_ST_BLOCKS */
-
-/* Define if you have the strcoll function and it is properly defined.	*/
-#define HAVE_STRCOLL 1
-
-/* Define if your struct stat has st_rdev.  */
-#define HAVE_ST_RDEV 1
-
-/* Define if you have the strftime function.  */
-#define HAVE_STRFTIME 1
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible.	*/
-/* #undef HAVE_SYS_WAIT_H */
-
-/* Define if your struct tm has tm_zone.  */
-/* #undef HAVE_TM_ZONE */
-
-/* Define if you don't have tm_zone but do have the external array
-   tzname.  */
-#define HAVE_TZNAME 1
-
-/* Define if you have <unistd.h>.  */
-#define HAVE_UNISTD_H 1
-
-/* Define if utime(file, NULL) sets file's timestamp to the present.  */
-/* #undef HAVE_UTIME_NULL */
-
-/* Define if you have <vfork.h>.  */
-/* #undef HAVE_VFORK_H */
-
-/* Define if you have the vprintf function.  */
-#define HAVE_VPRINTF 1
-
-/* Define if you have the wait3 system call.  */
-/* #undef HAVE_WAIT3 */
-
-/* Define if on MINIX.	*/
-/* #undef _MINIX */
-
-/* Define if your struct nlist has an n_un member.  */
-/* #undef NLIST_NAME_UNION */
-
-/* Define if you have <nlist.h>.  */
-/* #undef NLIST_STRUCT */
-
-/* Define if your C compiler doesn't accept -c and -o together.  */
-/* #undef NO_MINUS_C_MINUS_O */
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#define pid_t int
-
-/* Define if the system does not provide POSIX.1 features except
-   with this defined.  */
-/* #undef _POSIX_1_SOURCE */
-
-/* Define if you need to in order for stat and other things to work.  */
-/* #undef _POSIX_SOURCE */
-
-/* Define as the return type of signal handlers (int or void).  */
-#define RETSIGTYPE void
-
-/* Define if the setvbuf function takes the buffering type as its second
-   argument and the buffer pointer as the third, as on System V
-   before release 3.  */
-/* #undef SETVBUF_REVERSED */
-
-/* If using the C implementation of alloca, define if you know the
-   direction of stack growth for your system; otherwise it will be
-   automatically deduced at run-time.
-	STACK_DIRECTION > 0 => grows toward higher addresses
-	STACK_DIRECTION < 0 => grows toward lower addresses
-	STACK_DIRECTION = 0 => direction of growth unknown
- */
-#define STACK_DIRECTION -1
-
-/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
-/* #undef STAT_MACROS_BROKEN */
-
-/* Define if you have the ANSI C header files.	*/
-#define STDC_HEADERS
-
-/* Define on System V Release 4.  */
-/* #undef SVR4 */
-
-/* Define if `sys_siglist' is declared by <signal.h>.  */
-/* #undef SYS_SIGLIST_DECLARED */
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#define uid_t int
-
-/* Define for Encore UMAX.  */
-/* #undef UMAX */
-
-/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
-   instead of <sys/cpustats.h>.  */
-/* #undef UMAX4_3 */
-
-/* Define vfork as fork if vfork does not work.  */
-/* #undef vfork */
-
-/* Name of this package (needed by automake) */
-#define PACKAGE "make"
-
-/* Version of this package (needed by automake) */
-#define VERSION "3.79.1"
-
-/* Define to the name of the SCCS `get' command.  */
-#define SCCS_GET "get"
-
-/* Define this if the SCCS `get' command understands the `-G<file>' option.  */
-/* #undef SCCS_GET_MINUS_G */
-
-/* Define this to enable job server support in GNU make.  */
-/* #undef MAKE_JOBSERVER */
-
-/* Define to be the nanoseconds member of struct stat's st_mtim,
-   if it exists.  */
-/* #undef ST_MTIM_NSEC */
-
-/* Define this if the C library defines the variable `sys_siglist'.  */
-/* #undef HAVE_SYS_SIGLIST */
-
-/* Define this if the C library defines the variable `_sys_siglist'.  */
-/* #undef HAVE__SYS_SIGLIST */
-
-/* Define this if you have the `union wait' type in <sys/wait.h>.  */
-/* #undef HAVE_UNION_WAIT */
-
-/* Define if you have the dup2 function.  */
-/* #undef HAVE_DUP2 */
-
-/* Define if you have the getcwd function.  */
-#define HAVE_GETCWD 1
-
-/* Define if you have the getgroups function.  */
-/* #undef HAVE_GETGROUPS */
-
-/* Define if you have the gethostbyname function.  */
-/* #undef HAVE_GETHOSTBYNAME */
-
-/* Define if you have the gethostname function.  */
-/* #undef HAVE_GETHOSTNAME */
-
-/* Define if you have the memmove function.  */
-#define HAVE_MEMMOVE 1
-
-/* Define if you have the mktemp function.  */
-#define HAVE_MKTEMP 1
-
-/* Define if you have the psignal function.  */
-/* #undef HAVE_PSIGNAL */
-
-/* Define if you have the pstat_getdynamic function.  */
-/* #undef HAVE_PSTAT_GETDYNAMIC */
-
-/* Define if you have the setegid function.  */
-/* #undef HAVE_SETEGID */
-
-/* Define if you have the seteuid function.  */
-/* #undef HAVE_SETEUID */
-
-/* Define if you have the setlinebuf function.	*/
-/* #undef HAVE_SETLINEBUF */
-
-/* Define if you have the setregid function.  */
-/* #undef HAVE_SETREGID */
-
-/* Define if you have the setreuid function.  */
-/* #undef HAVE_SETREUID */
-
-/* Define if you have the sigsetmask function.	*/
-/* #undef HAVE_SIGSETMASK */
-
-/* Define if you have the socket function.  */
-/* #undef HAVE_SOCKET */
-
-/* Define if you have the strcasecmp function.  */
-/* #undef HAVE_STRCASECMP */
-
-/* Define if you have the strerror function.  */
-#define HAVE_STRERROR 1
-
-/* Define if you have the strsignal function.  */
-/* #undef HAVE_STRSIGNAL */
-
-/* Define if you have the wait3 function.  */
-/* #undef HAVE_WAIT3 */
-
-/* Define if you have the waitpid function.  */
-/* #undef HAVE_WAITPID */
-
-/* Define if you have the <dirent.h> header file.  */
-#define HAVE_DIRENT_H 1
-
-/* Define if you have the <fcntl.h> header file.  */
-#define HAVE_FCNTL_H 1
-
-/* Define if you have the <limits.h> header file.  */
-#define HAVE_LIMITS_H 1
-
-/* Define if you have the <mach/mach.h> header file.  */
-/* #undef HAVE_MACH_MACH_H */
-
-/* Define if you have the <memory.h> header file.  */
-/* #undef HAVE_MEMORY_H */
-
-/* Define if you have the <ndir.h> header file.  */
-/* #undef HAVE_NDIR_H */
-
-/* Define if you have the <stdlib.h> header file.  */
-/* #undef HAVE_STDLIB_H */
-
-/* Define if you have the <string.h> header file.  */
-#define HAVE_STRING_H 1
-
-/* Define if you have the <sys/dir.h> header file.  */
-#define HAVE_SYS_DIR_H 1
-
-/* Define if you have the <sys/ndir.h> header file.  */
-/* #undef HAVE_SYS_NDIR_H */
-
-/* Define if you have the <sys/param.h> header file.  */
-/* #undef HAVE_SYS_PARAM_H */
-
-/* Define if you have the <sys/timeb.h> header file.  */
-/* #undef HAVE_SYS_TIMEB_H */
-
-/* Define if you have the <sys/wait.h> header file.  */
-/* #undef HAVE_SYS_WAIT_H */
-
-/* Define if you have the <unistd.h> header file.  */
-#define HAVE_UNISTD_H 1
-
-/* Define if you have the dgc library (-ldgc).  */
-/* #undef HAVE_LIBDGC */
-
-/* Define if you have the kstat library (-lkstat).  */
-/* #undef HAVE_LIBKSTAT */
-
-/* Define if you have the sun library (-lsun).  */
-/* #undef HAVE_LIBSUN */
-
-/* Define for Case Insensitve behavior */
-#define HAVE_CASE_INSENSITIVE_FS
-
-/* Build host information. */
-#define MAKE_HOST "Amiga"

buildtools/windows/source/make-3.79.1/config.h-vms

@@ -1,400 +0,0 @@
-/* config.h-vms. Generated by hand by Klaus Kämpf <kkaempf@rmi.de> */
-/* config.h.  Generated automatically by configure.  */
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define if on AIX 3.
-   System headers sometimes define this.
-   We just want to avoid a redefinition error message.  */
-#ifndef _ALL_SOURCE
-/* #undef _ALL_SOURCE */
-#endif
-
-/* Define if using alloca.c.  */
-/* #undef C_ALLOCA */
-/* maybe this should be placed into make.h */
-#if	defined(__VAX) && defined(__DECC)
-#define alloca(n)	__ALLOCA(n)
-#endif
-
-/* Define to 1 if NLS is requested.  */
-/* #undef ENABLE_NLS */
-
-/* Define as 1 if you have dcgettext.  */
-/* #undef HAVE_DCGETTEXT */
-
-/* Define as 1 if you have gettext and don't want to use GNU gettext.  */
-/* #undef HAVE_GETTEXT */
-
-/* Define if your locale.h file contains LC_MESSAGES.  */
-/* #undef HAVE_LC_MESSAGES */
-
-/* Define to the installation directory for locales.  */
-#define LOCALEDIR ""
-
-/* Define as 1 if you have the stpcpy function.  */
-/* #undef HAVE_STPCPY */
-
-/* Define if the closedir function returns void instead of int.  */
-/* #undef CLOSEDIR_VOID */
-
-/* Define to empty if the keyword does not work.  */
-/* #undef const */
-
-/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
-   This function is required for alloca.c support on those systems.  */
-/* #undef CRAY_STACKSEG_END */
-
-/* Define for DGUX with <sys/dg_sys_info.h>.  */
-/* #undef DGUX */
-
-/* Define if the `getloadavg' function needs to be run setuid or setgid.  */
-/* #undef GETLOADAVG_PRIVILEGED */
-
-/* Define to `unsigned long' or `unsigned long long'
-   if <inttypes.h> doesn't define.  */
-#define uintmax_t unsigned long
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-/* #undef gid_t */
-
-/* Define if you have alloca, as a function or macro.  */
-#define HAVE_ALLOCA 1
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
-/* #undef HAVE_ALLOCA_H */
-
-/* Define if you don't have vprintf but do have _doprnt.  */
-/* #undef HAVE_DOPRNT */
-
-/* Define if your system has a working fnmatch function.  */
-/* #undef HAVE_FNMATCH */
-
-/* Define if your system has its own `getloadavg' function.  */
-/* #undef HAVE_GETLOADAVG */
-
-/* Define if you have the getmntent function.  */
-/* #undef HAVE_GETMNTENT */
-
-/* Define if the `long double' type works.  */
-/* #undef HAVE_LONG_DOUBLE */
-
-/* Define if you support file names longer than 14 characters.  */
-#define HAVE_LONG_FILE_NAMES 1
-
-/* Define if you have a working `mmap' system call.  */
-/* #undef HAVE_MMAP */
-
-/* Define if system calls automatically restart after interruption
-   by a signal.  */
-/* #undef HAVE_RESTARTABLE_SYSCALLS */
-
-/* Define if your struct stat has st_blksize.  */
-/* #undef HAVE_ST_BLKSIZE */
-
-/* Define if your struct stat has st_blocks.  */
-/* #undef HAVE_ST_BLOCKS */
-
-/* Define if you have the strcoll function and it is properly defined.  */
-/* #undef HAVE_STRCOLL */
-
-/* Define if your struct stat has st_rdev.  */
-/* #undef HAVE_ST_RDEV */
-
-/* Define if you have the strftime function.  */
-/* #undef HAVE_STRFTIME */
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
-/* #undef HAVE_SYS_WAIT_H */
-
-/* Define if your struct tm has tm_zone.  */
-/* #undef HAVE_TM_ZONE */
-
-/* Define if you don't have tm_zone but do have the external array
-   tzname.  */
-/* #undef HAVE_TZNAME */
-
-/* Define if you have <unistd.h>.  */
-#ifdef __DECC
-#define HAVE_UNISTD_H 1
-#endif
-
-/* Define if utime(file, NULL) sets file's timestamp to the present.  */
-/* #undef HAVE_UTIME_NULL */
-
-/* Define if you have <vfork.h>.  */
-/* #undef HAVE_VFORK_H */
-
-/* Define if you have the vprintf function.  */
-#define HAVE_VPRINTF 1
-
-/* Define if you have the wait3 system call.  */
-/* #undef HAVE_WAIT3 */
-
-/* Define if on MINIX.  */
-/* #undef _MINIX */
-
-/* Define if your struct nlist has an n_un member.  */
-/* #undef NLIST_NAME_UNION */
-
-/* Define if you have <nlist.h>.  */
-/* #undef NLIST_STRUCT */
-
-/* Define if your C compiler doesn't accept -c and -o together.  */
-/* #undef NO_MINUS_C_MINUS_O */
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-/* I assume types.h is available for all 5.0 cc/cxx compilers */
-#if __DECC_VER < 50090000
-#define pid_t int
-#endif
-
-/* Define if the system does not provide POSIX.1 features except
-   with this defined.  */
-/* #undef _POSIX_1_SOURCE */
-
-/* Define if you need to in order for stat and other things to work.  */
-/* #undef _POSIX_SOURCE */
-
-/* Define as the return type of signal handlers (int or void).  */
-#define RETSIGTYPE void
-
-/* Define if the setvbuf function takes the buffering type as its second
-   argument and the buffer pointer as the third, as on System V
-   before release 3.  */
-/* #undef SETVBUF_REVERSED */
-
-/* If using the C implementation of alloca, define if you know the
-   direction of stack growth for your system; otherwise it will be
-   automatically deduced at run-time.
-	STACK_DIRECTION > 0 => grows toward higher addresses
-	STACK_DIRECTION < 0 => grows toward lower addresses
-	STACK_DIRECTION = 0 => direction of growth unknown
- */
-/* #undef STACK_DIRECTION */
-
-/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
-/* #undef STAT_MACROS_BROKEN */
-
-/* Define if you have the ANSI C header files.  */
-/* #undef STDC_HEADERS */
-
-/* Define on System V Release 4.  */
-/* #undef SVR4 */
-
-/* Define if `sys_siglist' is declared by <signal.h>.  */
-/* #undef SYS_SIGLIST_DECLARED */
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#if __DECC_VER < 50090000
-#define uid_t int
-#endif
-
-/* Define for Encore UMAX.  */
-/* #undef UMAX */
-
-/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
-   instead of <sys/cpustats.h>.  */
-/* #undef UMAX4_3 */
-
-/* Define vfork as fork if vfork does not work.  */
-/* #undef vfork */
-
-/* Name of this package (needed by automake) */
-#define PACKAGE "make"
-
-/* Version of this package (needed by automake) */
-#define VERSION "3.79.1"
-
-/* Define to the name of the SCCS `get' command.  */
-/* #undef SCCS_GET */
-
-/* Define this if the SCCS `get' command understands the `-G<file>' option.  */
-/* #undef SCCS_GET_MINUS_G */
-
-/* Define this to enable job server support in GNU make.  */
-/* #undef MAKE_JOBSERVER */
-
-/* Define to be the nanoseconds member of struct stat's st_mtim,
-   if it exists.  */
-/* #undef ST_MTIM_NSEC */
-
-/* Define this if the C library defines the variable `sys_siglist'.  */
-/* #undefine HAVE_SYS_SIGLIST */
-
-/* Define this if the C library defines the variable `_sys_siglist'.  */
-/* #undef HAVE__SYS_SIGLIST */
-
-/* Define this if you have the `union wait' type in <sys/wait.h>.  */
-/* #undef HAVE_UNION_WAIT */
-
-/* Define if you have the dup2 function.  */
-#define HAVE_DUP2 1
-
-/* Define if you have the getcwd function.  */
-#define HAVE_GETCWD 1
-
-/* Define if you have the getgroups function.  */
-/* #undef HAVE_GETGROUPS */
-
-/* Define if you have the gethostbyname function.  */
-/* #undef HAVE_GETHOSTBYNAME */
-
-/* Define if you have the gethostname function.  */
-/* #undef HAVE_GETHOSTNAME */
-
-/* Define if you have the getloadavg function.  */
-/* #undef HAVE_GETLOADAVG */
-
-/* Define if you have the memmove function.  */
-#define HAVE_MEMMOVE 1
-
-/* Define if you have the mktemp function.  */
-#define HAVE_MKTEMP 1
-
-/* Define if you have the psignal function.  */
-/* #undef HAVE_PSIGNAL */
-
-/* Define if you have the pstat_getdynamic function.  */
-/* #undef HAVE_PSTAT_GETDYNAMIC */
-
-/* Define if you have the setegid function.  */
-/* #undef HAVE_SETEGID */
-
-/* Define if you have the seteuid function.  */
-/* #undef HAVE_SETEUID */
-
-/* Define if you have the setlinebuf function.  */
-/* #undef HAVE_SETLINEBUF */
-
-/* Define if you have the setregid function.  */
-/* #undefine HAVE_SETREGID */
-
-/* Define if you have the setreuid function.  */
-/* #define HAVE_SETREUID */
-
-/* Define if you have the sigsetmask function.  */
-#define HAVE_SIGSETMASK 1
-
-/* Define if you have the socket function.  */
-/* #undef HAVE_SOCKET */
-
-/* Define if you have the strcasecmp function.  */
-/* #undef HAVE_STRCASECMP */
-
-/* Define if you have the strerror function.  */
-#define HAVE_STRERROR 1
-
-/* Define if you have the strsignal function.  */
-/* #undef HAVE_STRSIGNAL */
-
-/* Define if you have the wait3 function.  */
-/* #undef HAVE_WAIT3 */
-
-/* Define if you have the waitpid function.  */
-/* #undef HAVE_WAITPID */
-
-/* Define if you have the <dirent.h> header file.  */
-#define HAVE_DIRENT_H 1
-
-/* Define if you have the <fcntl.h> header file.  */
-#ifdef __DECC
-#define HAVE_FCNTL_H 1
-#endif
-
-/* Define if you have the <limits.h> header file.  */
-#define HAVE_LIMITS_H 1
-
-/* Define if you have the <mach/mach.h> header file.  */
-/* #undef HAVE_MACH_MACH_H */
-
-/* Define if you have the <memory.h> header file.  */
-/* #undef HAVE_MEMORY_H */
-
-/* Define if you have the <ndir.h> header file.  */
-/* #undef HAVE_NDIR_H */
-
-/* Define if you have the <stdlib.h> header file.  */
-#define HAVE_STDLIB_H 1
-
-/* Define if you have the <string.h> header file.  */
-#define HAVE_STRING_H 1
-
-/* Define if you have the <sys/dir.h> header file.  */
-/* #undef HAVE_SYS_DIR_H */
-
-/* Define if you have the <sys/ndir.h> header file.  */
-/* #undef HAVE_SYS_NDIR_H */
-
-/* Define if you have the <sys/param.h> header file.  */
-/* #undef HAVE_SYS_PARAM_H */
-
-/* Define if you have the <sys/timeb.h> header file.  */
-#ifndef __GNUC__
-#define HAVE_SYS_TIMEB_H 1
-#endif
-
-/* Define if you have the <sys/wait.h> header file.  */
-/* #undef HAVE_SYS_WAIT_H */
-
-/* Define if you have the dgc library (-ldgc).  */
-/* #undef HAVE_LIBDGC */
-
-/* Define if you have the kstat library (-lkstat).  */
-/* #undef HAVE_LIBKSTAT *
-
-/* Define if you have the sun library (-lsun).  */
-/* #undef HAVE_LIBSUN */
-
-/* Define for case insensitve filenames */
-#define HAVE_CASE_INSENSITIVE_FS 1
-
-/* VMS specific, define it if you want to use case sensitve targets */
-/* #undef WANT_CASE_SENSITIVE_TARGETS */
-
-/* VMS specific, V7.0 has opendir() and friends, so it's undefined */
-/* If you want to use non-VMS code for opendir() etc. on V7.0 and greater
-   define the first or both macros AND change the compile command to get the
-   non-VMS versions linked: (prefix=(all,except=(opendir,...  */
-/* #undef HAVE_VMSDIR_H */
-/* #undef _DIRENT_HAVE_D_NAMLEN */
-
-/* On older systems without 7.0 backport of CRTL the first one is defined */
-#ifdef __CRTL_VER
-# if __CRTL_VER < 70000000
-#  define HAVE_VMSDIR_H 1
-# endif
-#else
-# if __VMS_VER < 70000000
-#  define HAVE_VMSDIR_H 1
-# endif
-#endif
-
-#if defined(HAVE_VMSDIR_H) && defined(HAVE_DIRENT_H)
-#undef HAVE_DIRENT_H
-#endif
-
-#define HAVE_STDLIB_H 1
-#define INCLUDEDIR "sys$sysroot:[syslib]"
-#define LIBDIR "sys$sysroot:[syslib]"
-
-/* Don't use RTL functions of OpenVMS */
-#ifdef __DECC
-#include <stdio.h>
-#include <unistd.h>
-#define getopt gnu_getopt
-#define optarg gnu_optarg
-#define optopt gnu_optopt
-#define optind gnu_optind
-#define opterr gnu_opterr
-#endif
-
-#if defined (__cplusplus) || (defined (__STDC__) && __STDC__)
-#undef  PARAMS
-#define PARAMS(protos)  protos
-#else /* Not C++ or ANSI C.  */
-#undef  PARAMS
-#define PARAMS(protos)  ()
-#endif /* C++ or ANSI C.  */
-
-/* Build host information. */
-#define MAKE_HOST "VMS"

buildtools/windows/source/make-3.79.1/config.h.W32

@@ -1,392 +0,0 @@
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define if on AIX 3.
-   System headers sometimes define this.
-   We just want to avoid a redefinition error message.  */
-#ifndef _ALL_SOURCE
-/* #undef _ALL_SOURCE */
-#endif
-
-/* Define if using alloca.c.  */
-/* #undef C_ALLOCA */
-
-/* Define if the closedir function returns void instead of int.  */
-/* #undef CLOSEDIR_VOID */
-
-/* Define to empty if the keyword does not work.  */
-/* #undef const */
-
-/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
-   This function is required for alloca.c support on those systems.  */
-/* #undef CRAY_STACKSEG_END */
-
-/* Define for DGUX with <sys/dg_sys_info.h>.  */
-/* #undef DGUX */
-
-/* Define if the `getloadavg' function needs to be run setuid or setgid.  */
-/* #undef GETLOADAVG_PRIVILEGED */
-
-/* Define to `unsigned long' or `unsigned long long'
-   if <inttypes.h> doesn't define.  */
-#define uintmax_t unsigned long
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef gid_t
-#define gid_t int
-
-/* Define if you have alloca, as a function or macro.  */
-#undef HAVE_ALLOCA
-#define HAVE_ALLOCA 1
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
-/* #undef HAVE_ALLOCA_H */
-
-/* Define if you don't have vprintf but do have _doprnt.  */
-/* #undef HAVE_DOPRNT */
-
-/* Define if your system has a working fnmatch function.  */
-/* #undef HAVE_FNMATCH */
-
-/* Define if your system has its own `getloadavg' function.  */
-/* #undef HAVE_GETLOADAVG */
-
-/* Define if you have the getmntent function.  */
-/* #undef HAVE_GETMNTENT */
-
-/* Define if the `long double' type works.  */
-/* #undef HAVE_LONG_DOUBLE */
-
-/* Define if you support file names longer than 14 characters.  */
-#undef HAVE_LONG_FILE_NAMES
-#define HAVE_LONG_FILE_NAMES 1
-
-/* Define if you have a working `mmap' system call.  */
-/* #undef HAVE_MMAP */
-
-/* Define if system calls automatically restart after interruption
-   by a signal.  */
-/* #undef HAVE_RESTARTABLE_SYSCALLS */
-
-/* Define if your struct stat has st_blksize.  */
-/* #undef HAVE_ST_BLKSIZE */
-
-/* Define if your struct stat has st_blocks.  */
-/* #undef HAVE_ST_BLOCKS */
-
-/* Define if you have the strcoll function and it is properly defined.  */
-#undef HAVE_STRCOLL
-#define HAVE_STRCOLL 1
-
-/* Define if your struct stat has st_rdev.  */
-#undef HAVE_ST_RDEV
-#define HAVE_ST_RDEV 1
-
-/* Define if you have the strftime function.  */
-#undef HAVE_STRFTIME
-#define HAVE_STRFTIME 1
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
-/* #undef HAVE_SYS_WAIT_H */
-
-/* Define if your struct tm has tm_zone.  */
-/* #undef HAVE_TM_ZONE */
-
-/* Define if you don't have tm_zone but do have the external array
-   tzname.  */
-#undef HAVE_TZNAME
-#define HAVE_TZNAME 1
-
-/* Define if you have <unistd.h>.  */
-/* #undef HAVE_UNISTD_H */
-
-/* Define if utime(file, NULL) sets file's timestamp to the present.  */
-#undef HAVE_UTIME_NULL
-#define HAVE_UTIME_NULL 1
-
-/* Define if you have <vfork.h>.  */
-/* #undef HAVE_VFORK_H */
-
-/* Define if you have the vprintf function.  */
-#undef HAVE_VPRINTF
-#define HAVE_VPRINTF 1
-
-/* Define if you have the wait3 system call.  */
-/* #undef HAVE_WAIT3 */
-
-/* Define if on MINIX.  */
-/* #undef _MINIX */
-
-/* Define if your struct nlist has an n_un member.  */
-/* #undef NLIST_NAME_UNION */
-
-/* Define if you have <nlist.h>.  */
-/* #undef NLIST_STRUCT */
-
-/* Define if your C compiler doesn't accept -c and -o together.  */
-/* #undef NO_MINUS_C_MINUS_O */
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef pid_t
-#define pid_t int
-
-/* Define if the system does not provide POSIX.1 features except
-   with this defined.  */
-/* #undef _POSIX_1_SOURCE */
-
-/* Define if you need to in order for stat and other things to work.  */
-#undef _POSIX_SOURCE
-#define _POSIX_SOURCE 1
-
-/* Define as the return type of signal handlers (int or void).  */
-#undef RETSIGTYPE
-#define RETSIGTYPE void
-
-/* Define if the setvbuf function takes the buffering type as its second
-   argument and the buffer pointer as the third, as on System V
-   before release 3.  */
-/* #undef SETVBUF_REVERSED */
-
-/* If using the C implementation of alloca, define if you know the
-   direction of stack growth for your system; otherwise it will be
-   automatically deduced at run-time.
-	STACK_DIRECTION > 0 => grows toward higher addresses
-	STACK_DIRECTION < 0 => grows toward lower addresses
-	STACK_DIRECTION = 0 => direction of growth unknown
- */
-/* #undef STACK_DIRECTION */
-
-/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
-/* #undef STAT_MACROS_BROKEN */
-
-/* Define if you have the ANSI C header files.  */
-#undef STDC_HEADERS
-#define STDC_HEADERS 1
-
-/* Define on System V Release 4.  */
-/* #undef SVR4 */
-
-/* Define if `sys_siglist' is declared by <signal.h>.  */
-/* #undef SYS_SIGLIST_DECLARED */
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef uid_t
-#define uid_t int
-
-/* Define for Encore UMAX.  */
-/* #undef UMAX */
-
-/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
-   instead of <sys/cpustats.h>.  */
-/* #undef UMAX4_3 */
-
-/* Define vfork as fork if vfork does not work.  */
-/* #undef vfork */
-
-/* Name of this package (needed by automake) */
-#define PACKAGE "make"
-
-/* Version of this package (needed by automake) */
-#define VERSION "3.79.1"
-
-/* Define to the name of the SCCS `get' command.  */
-#undef SCCS_GET
-#define SCCS_GET "echo no sccs get"
-
-/* Define to 1 if NLS is requested.  */
-/* #undef ENABLE_NLS */
-
-/* Define as 1 if you have dcgettext.  */
-/* #undef HAVE_DCGETTEXT */
-
-/* Define as 1 if you have gettext and don't want to use GNU gettext.  */
-/* #undef HAVE_GETTEXT */
-
-/* Define if your locale.h file contains LC_MESSAGES.  */
-/* #undef HAVE_LC_MESSAGES */
-
-/* Define to the installation directory for locales.  */
-#define LOCALEDIR ""
-
-/* Define this if the SCCS `get' command understands the `-G<file>' option.  */
-/* #undef SCCS_GET_MINUS_G */
-
-/* Define this to enable job server support in GNU make.  */
-/* #undef MAKE_JOBSERVER */
-
-/* Define to be the nanoseconds member of struct stat's st_mtim,
-   if it exists.  */
-/* #undef ST_MTIM_NSEC */
-
-/* Define this if the C library defines the variable `sys_siglist'.  */
-/* #undef HAVE_SYS_SIGLIST */
-
-/* Define this if the C library defines the variable `_sys_siglist'.  */
-/* #undef HAVE__SYS_SIGLIST */
-
-/* Define this if you have the `union wait' type in <sys/wait.h>.  */
-/* #undef HAVE_UNION_WAIT */
-
-/* Define if you have the dup2 function.  */
-#undef HAVE_DUP2
-#define HAVE_DUP2 1
-
-/* Define if you have the getcwd function.  */
-#undef HAVE_GETCWD
-#define HAVE_GETCWD 1
-
-/* Define if you have the getgroups function.  */
-/* #undef HAVE_GETGROUPS */
-
-/* Define if you have the gethostbyname function.  */
-/* #undef HAVE_GETHOSTBYNAME */
-
-/* Define if you have the gethostname function.  */
-/* #undef HAVE_GETHOSTNAME */
-
-/* Define if you have the getloadavg function.  */
-/* #undef HAVE_GETLOADAVG */
-
-/* Define if you have the memmove function.  */
-#undef HAVE_MEMMOVE
-#define HAVE_MEMMOVE 1
-
-/* Define if you have the mktemp function.  */
-#undef HAVE_MKTEMP
-#define HAVE_MKTEMP 1
-
-/* Define if you have the psignal function.  */
-/* #undef HAVE_PSIGNAL */
-
-/* Define if you have the pstat_getdynamic function.  */
-/* #undef HAVE_PSTAT_GETDYNAMIC */
-
-/* Define if you have the setegid function.  */
-/* #undef HAVE_SETEGID */
-
-/* Define if you have the seteuid function.  */
-/* #undef HAVE_SETEUID */
-
-/* Define if you have the setlinebuf function.  */
-/* #undef HAVE_SETLINEBUF */
-
-/* Define if you have the setregid function.  */
-/* #undef HAVE_SETREGID */
-
-/* Define if you have the setreuid function.  */
-/* #undef HAVE_SETREUID */
-
-/* Define if you have the sigsetmask function.  */
-/* #undef HAVE_SIGSETMASK */
-
-/* Define if you have the socket function.  */
-/* #undef HAVE_SOCKET */
-
-/* Define if you have the strcasecmp function.  */
-/* #undef HAVE_STRCASECMP */
-
-/* Define if you have the strerror function.  */
-#undef HAVE_STRERROR
-#define HAVE_STRERROR 1
-
-/* Define if you have the strsignal function.  */
-/* #undef HAVE_STRSIGNAL */
-
-/* Define if you have the wait3 function.  */
-/* #undef HAVE_WAIT3 */
-
-/* Define if you have the waitpid function.  */
-/* #undef HAVE_WAITPID */
-
-/* Define if you have the <dirent.h> header file.  */
-#undef HAVE_DIRENT_H
-#define HAVE_DIRENT_H 1
-
-/* Define if you have the <fcntl.h> header file.  */
-#undef HAVE_FCNTL_H
-#define HAVE_FCNTL_H 1
-
-/* Define if you have the <limits.h> header file.  */
-#undef HAVE_LIMITS_H
-#define HAVE_LIMITS_H 1
-
-/* Define if you have the <mach/mach.h> header file.  */
-/* #undef HAVE_MACH_MACH_H */
-
-/* Define if you have the <memory.h> header file.  */
-#undef HAVE_MEMORY_H
-#define HAVE_MEMORY_H 1
-
-/* Define if you have the <ndir.h> header file.  */
-/* #undef HAVE_NDIR_H */
-
-/* Define if you have the <string.h> header file.  */
-#undef HAVE_STRING_H
-#define HAVE_STRING_H 1
-
-/* Define if you have the <sys/dir.h> header file.  */
-/* #undef HAVE_SYS_DIR_H */
-
-/* Define if you have the <sys/ndir.h> header file.  */
-/* #undef HAVE_SYS_NDIR_H */
-
-/* Define if you have the <sys/param.h> header file.  */
-/* #undef HAVE_SYS_PARAM_H */
-
-/* Define if you have the <sys/timeb.h> header file.  */
-#undef HAVE_SYS_TIMEB_H
-#define HAVE_SYS_TIMEB_H 1
-
-/* Define if you have the <sys/wait.h> header file.  */
-/* #undef HAVE_SYS_WAIT_H */
-
-/* Define if you have the <unistd.h> header file.  */
-/* #undef HAVE_UNISTD_H */
-
-/* Define if you have the dgc library (-ldgc).  */
-/* #undef HAVE_LIBDGC */
-
-/* Define if you have the kstat library (-lkstat).  */
-/* #undef HAVE_LIBKSTAT */
-
-/* Define if you have the sun library (-lsun).  */
-/* #undef HAVE_LIBSUN */
-
-/* Build host information. */
-#define MAKE_HOST "Windows32"
-
-/*
- * Refer to README.W32 for info on the following settings
- */
-
-/*
- * If you have a shell that does not grok 'sh -c quoted-command-line'
- * correctly, you need this setting. Please see below for specific
- * shell support.
- */
-#undef BATCH_MODE_ONLY_SHELL
-
-/*
- * Define if you have the Cygnus "Cygwin" GNU Windows32 tool set.
- * Do NOT define BATCH_MODE_ONLY_SHELL if you define HAVE_CYGWIN_SHELL
- */
-#undef HAVE_CYGWIN_SHELL
-
-/*
- * Define if you have the MKS tool set or shell. Do NOT define
- * BATCH_MODE_ONLY_SHELL if you define HAVE_MKS_SHELL
- */
-#undef HAVE_MKS_SHELL
-
-/*
- * Enforce the mutual exclusivity restriction.
- */
-#ifdef HAVE_MKS_SHELL
-#undef BATCH_MODE_ONLY_SHELL
-#endif
-
-#ifdef HAVE_CYGWIN_SHELL
-#undef BATCH_MODE_ONLY_SHELL
-#endif
-
-/* Define if you prefer Case Insensitive behavior */
-#undef HAVE_CASE_INSENSITIVE_FS

buildtools/windows/source/make-3.79.1/config.h.in

@@ -1,399 +0,0 @@
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define if on AIX 3.
-   System headers sometimes define this.
-   We just want to avoid a redefinition error message.  */
-#ifndef _ALL_SOURCE
-#undef _ALL_SOURCE
-#endif
-
-/* Define if using alloca.c.  */
-#undef C_ALLOCA
-
-/* Define if the closedir function returns void instead of int.  */
-#undef CLOSEDIR_VOID
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
-   This function is required for alloca.c support on those systems.  */
-#undef CRAY_STACKSEG_END
-
-/* Define for DGUX with <sys/dg_sys_info.h>.  */
-#undef DGUX
-
-/* Define if the `getloadavg' function needs to be run setuid or setgid.  */
-#undef GETLOADAVG_PRIVILEGED
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef gid_t
-
-/* Define if you have alloca, as a function or macro.  */
-#undef HAVE_ALLOCA
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
-#undef HAVE_ALLOCA_H
-
-/* Define if you don't have vprintf but do have _doprnt.  */
-#undef HAVE_DOPRNT
-
-/* Define if your system has a working fnmatch function.  */
-#undef HAVE_FNMATCH
-
-/* Define if your system has its own `getloadavg' function.  */
-#undef HAVE_GETLOADAVG
-
-/* Define if you have the getmntent function.  */
-#undef HAVE_GETMNTENT
-
-/* Define if the `long double' type works.  */
-#undef HAVE_LONG_DOUBLE
-
-/* Define if you support file names longer than 14 characters.  */
-#undef HAVE_LONG_FILE_NAMES
-
-/* Define if you have a working `mmap' system call.  */
-#undef HAVE_MMAP
-
-/* Define if system calls automatically restart after interruption
-   by a signal.  */
-#undef HAVE_RESTARTABLE_SYSCALLS
-
-/* Define if your struct stat has st_blksize.  */
-#undef HAVE_ST_BLKSIZE
-
-/* Define if your struct stat has st_blocks.  */
-#undef HAVE_ST_BLOCKS
-
-/* Define if you have the strcoll function and it is properly defined.  */
-#undef HAVE_STRCOLL
-
-/* Define if your struct stat has st_rdev.  */
-#undef HAVE_ST_RDEV
-
-/* Define if you have the strftime function.  */
-#undef HAVE_STRFTIME
-
-/* Define if you have the ANSI # stringizing operator in cpp. */
-#undef HAVE_STRINGIZE
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
-#undef HAVE_SYS_WAIT_H
-
-/* Define if your struct tm has tm_zone.  */
-#undef HAVE_TM_ZONE
-
-/* Define if you don't have tm_zone but do have the external array
-   tzname.  */
-#undef HAVE_TZNAME
-
-/* Define if you have <unistd.h>.  */
-#undef HAVE_UNISTD_H
-
-/* Define if utime(file, NULL) sets file's timestamp to the present.  */
-#undef HAVE_UTIME_NULL
-
-/* Define if you have <vfork.h>.  */
-#undef HAVE_VFORK_H
-
-/* Define if you have the vprintf function.  */
-#undef HAVE_VPRINTF
-
-/* Define if you have the wait3 system call.  */
-#undef HAVE_WAIT3
-
-/* Define as __inline if that's what the C compiler calls it.  */
-#undef inline
-
-/* Define if on MINIX.  */
-#undef _MINIX
-
-/* Define if your struct nlist has an n_un member.  */
-#undef NLIST_NAME_UNION
-
-/* Define if you have <nlist.h>.  */
-#undef NLIST_STRUCT
-
-/* Define if your C compiler doesn't accept -c and -o together.  */
-#undef NO_MINUS_C_MINUS_O
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef pid_t
-
-/* Define if the system does not provide POSIX.1 features except
-   with this defined.  */
-#undef _POSIX_1_SOURCE
-
-/* Define if you need to in order for stat and other things to work.  */
-#undef _POSIX_SOURCE
-
-/* Define as the return type of signal handlers (int or void).  */
-#undef RETSIGTYPE
-
-/* Define if the setvbuf function takes the buffering type as its second
-   argument and the buffer pointer as the third, as on System V
-   before release 3.  */
-#undef SETVBUF_REVERSED
-
-/* If using the C implementation of alloca, define if you know the
-   direction of stack growth for your system; otherwise it will be
-   automatically deduced at run-time.
- STACK_DIRECTION > 0 => grows toward higher addresses
- STACK_DIRECTION < 0 => grows toward lower addresses
- STACK_DIRECTION = 0 => direction of growth unknown
- */
-#undef STACK_DIRECTION
-
-/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
-#undef STAT_MACROS_BROKEN
-
-/* Define if you have the ANSI C header files.  */
-#undef STDC_HEADERS
-
-/* Define on System V Release 4.  */
-#undef SVR4
-
-/* Define if `sys_siglist' is declared by <signal.h>.  */
-#undef SYS_SIGLIST_DECLARED
-
-/* Define if you can safely include both <sys/time.h> and <time.h>.  */
-#undef TIME_WITH_SYS_TIME
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef uid_t
-
-/* Define for Encore UMAX.  */
-#undef UMAX
-
-/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
-   instead of <sys/cpustats.h>.  */
-#undef UMAX4_3
-
-/* Define vfork as fork if vfork does not work.  */
-#undef vfork
-
-/* Define if your locale.h file contains LC_MESSAGES.  */
-#undef HAVE_LC_MESSAGES
-
-/* Define to the installation directory for locales.  */
-#undef LOCALEDIR
-
-/* Define to the name of the SCCS `get' command.  */
-#undef SCCS_GET
-
-/* Define to be the nanoseconds member of struct stat's st_mtim,
-   if it exists.  */
-#undef ST_MTIM_NSEC
-
-/* Define this if the C library defines the variable `sys_siglist'.  */
-#undef HAVE_SYS_SIGLIST
-
-/* Define this if the C library defines the variable `_sys_siglist'.  */
-#undef HAVE__SYS_SIGLIST
-
-/* Define to `unsigned long' or `unsigned long long'
-   if <inttypes.h> doesn't define.  */
-#undef uintmax_t
-
-/* Define if you have the INTTYPES_H function.  */
-#undef HAVE_INTTYPES_H
-
-/* Define if you have the dup2 function.  */
-#undef HAVE_DUP2
-
-/* Define if you have the fdopen function.  */
-#undef HAVE_FDOPEN
-
-/* Define if you have the getcwd function.  */
-#undef HAVE_GETCWD
-
-/* Define if you have the getgroups function.  */
-#undef HAVE_GETGROUPS
-
-/* Define if you have the gethostbyname function.  */
-#undef HAVE_GETHOSTBYNAME
-
-/* Define if you have the gethostname function.  */
-#undef HAVE_GETHOSTNAME
-
-/* Define if you have the getloadavg function.  */
-#undef HAVE_GETLOADAVG
-
-/* Define if you have the memcpy function.  */
-#undef HAVE_MEMCPY
-
-/* Define if you have the memmove function.  */
-#undef HAVE_MEMMOVE
-
-/* Define if you have the mkstemp function.  */
-#undef HAVE_MKSTEMP
-
-/* Define if you have the mktemp function.  */
-#undef HAVE_MKTEMP
-
-/* Define if you have the pipe function.  */
-#undef HAVE_PIPE
-
-/* Define if you have the psignal function.  */
-#undef HAVE_PSIGNAL
-
-/* Define if you have the pstat_getdynamic function.  */
-#undef HAVE_PSTAT_GETDYNAMIC
-
-/* Define if you have the setegid function.  */
-#undef HAVE_SETEGID
-
-/* Define if you have the seteuid function.  */
-#undef HAVE_SETEUID
-
-/* Define if you have the setlinebuf function.  */
-#undef HAVE_SETLINEBUF
-
-/* Define if you have the setlocale function.  */
-#undef HAVE_SETLOCALE
-
-/* Define if you have the setregid function.  */
-#undef HAVE_SETREGID
-
-/* Define if you have the setreuid function.  */
-#undef HAVE_SETREUID
-
-/* Define if you have the sigaction function.  */
-#undef HAVE_SIGACTION
-
-/* Define if you have the sigsetmask function.  */
-#undef HAVE_SIGSETMASK
-
-/* Define if you have the socket function.  */
-#undef HAVE_SOCKET
-
-/* Define if you have the stpcpy function.  */
-#undef HAVE_STPCPY
-
-/* Define if you have the strcasecmp function.  */
-#undef HAVE_STRCASECMP
-
-/* Define if you have the strchr function.  */
-#undef HAVE_STRCHR
-
-/* Define if you have the strdup function.  */
-#undef HAVE_STRDUP
-
-/* Define if you have the strerror function.  */
-#undef HAVE_STRERROR
-
-/* Define if you have the strsignal function.  */
-#undef HAVE_STRSIGNAL
-
-/* Define if you have the wait3 function.  */
-#undef HAVE_WAIT3
-
-/* Define if you have the waitpid function.  */
-#undef HAVE_WAITPID
-
-/* Define if you have the <dirent.h> header file.  */
-#undef HAVE_DIRENT_H
-
-/* Define if you have the <dmalloc.h> header file.  */
-#undef HAVE_DMALLOC_H
-
-/* Define if you have the <fcntl.h> header file.  */
-#undef HAVE_FCNTL_H
-
-/* Define if you have the <limits.h> header file.  */
-#undef HAVE_LIMITS_H
-
-/* Define if you have the <locale.h> header file.  */
-#undef HAVE_LOCALE_H
-
-/* Define if you have the <mach/mach.h> header file.  */
-#undef HAVE_MACH_MACH_H
-
-/* Define if you have the <memory.h> header file.  */
-#undef HAVE_MEMORY_H
-
-/* Define if you have the <ndir.h> header file.  */
-#undef HAVE_NDIR_H
-
-/* Define if you have the <stdlib.h> header file.  */
-#undef HAVE_STDLIB_H
-
-/* Define if you have the <string.h> header file.  */
-#undef HAVE_STRING_H
-
-/* Define if you have the <sys/dir.h> header file.  */
-#undef HAVE_SYS_DIR_H
-
-/* Define if you have the <sys/ndir.h> header file.  */
-#undef HAVE_SYS_NDIR_H
-
-/* Define if you have the <sys/param.h> header file.  */
-#undef HAVE_SYS_PARAM_H
-
-/* Define if you have the <sys/time.h> header file.  */
-#undef HAVE_SYS_TIME_H
-
-/* Define if you have the <sys/timeb.h> header file.  */
-#undef HAVE_SYS_TIMEB_H
-
-/* Define if you have the <sys/wait.h> header file.  */
-#undef HAVE_SYS_WAIT_H
-
-/* Define if you have the <unistd.h> header file.  */
-#undef HAVE_UNISTD_H
-
-/* Define if you have the dgc library (-ldgc).  */
-#undef HAVE_LIBDGC
-
-/* Define if you have the dmalloc library (-ldmalloc).  */
-#undef HAVE_LIBDMALLOC
-
-/* Define if you have the kstat library (-lkstat).  */
-#undef HAVE_LIBKSTAT
-
-/* Name of package */
-#undef PACKAGE
-
-/* Version number of package */
-#undef VERSION
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS
-
-/* Define to make fseeko etc. visible, on some hosts. */
-#undef _LARGEFILE_SOURCE
-
-/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES
-
-/* Define if NLS is requested. */
-#undef ENABLE_NLS
-
-/* Define if you have <libintl.h>. */
-#undef HAVE_LIBINTL_H
-
-/* Define if you have the gettext function. */
-#undef HAVE_GETTEXT
-
-/* Define if you have the dcgettext function. */
-#undef HAVE_DCGETTEXT
-
-/* Define if you have the clock_gettime function. */
-#undef HAVE_CLOCK_GETTIME
-
-/* Define if you have a standard gettimeofday function */
-#undef HAVE_GETTIMEOFDAY
-
-/* Define this if you have the `union wait' type in <sys/wait.h>. */
-#undef HAVE_UNION_WAIT
-
-/* Define this to enable job server support in GNU make. */
-#undef MAKE_JOBSERVER
-
-/* Define this if the SCCS `get' command understands the `-G<file>' option. */
-#undef SCCS_GET_MINUS_G
-
-/* Build host information. */
-#undef MAKE_HOST
-

buildtools/windows/source/make-3.79.1/configh.dos

@@ -1,58 +0,0 @@
-
-/* Many things are defined already by a system header.  */
-#include <sys/config.h>
-
-/* Name of this package (needed by automake) */
-#define PACKAGE "make"
-
-/* Version of this package (needed by automake) */
-#define VERSION "3.79.1"
-
-#if __DJGPP__ > 2 || __DJGPP_MINOR__ > 1
-
-/* Define if `sys_siglist' is declared by <signal.h>.  */
-# define SYS_SIGLIST_DECLARED 1
-
-/* Define this if the C library defines the variable `_sys_siglist'.  */
-# define HAVE_SYS_SIGLIST 1
-
-#else
-
-/* Define NSIG.  */
-# define NSIG SIGMAX
-
-#endif
-
-/* Define if you have the fdopen function.  */
-#define HAVE_FDOPEN 1
-
-/* Define if you have sigsetmask.  */
-#define HAVE_SIGSETMASK 1
-
-/* Define if you have the <memory.h> header file.  */
-#define HAVE_MEMORY_H 1
-
-/* Define if you have the memmove function.  */
-#define HAVE_MEMMOVE 1
-
-/* Define if you have the mkstemp function.  */
-#define HAVE_MKSTEMP 1
-
-#define SCCS_GET "get"
-
-/* Define to `unsigned long' or `unsigned long long'
-   if <inttypes.h> doesn't define.  */
-#define uintmax_t unsigned long long
-
-/* Define the type of the first arg to select().  */
-#define fd_set_size_t int
-
-/* Define if you have the select function.  */
-#define HAVE_SELECT 1
-
-/* Define if you have the vprintf library function.  */
-#undef HAVE_VPRINTF
-#define HAVE_VPRINTF 1
-
-/* Build host information. */
-#define MAKE_HOST "i386-pc-msdosdjgpp"

buildtools/windows/source/make-3.79.1/configure.bat

@@ -1,44 +0,0 @@
-@echo off
-echo Configuring MAKE for DJGPP
-
-rem The SmallEnv trick protects against too small environment block,
-rem in which case the values will be truncated and the whole thing
-rem goes awry.  COMMAND.COM will say "Out of environment space", but
-rem many people don't care, so we force them to care by refusing to go.
-
-rem Where is the srcdir?
-set XSRC=.
-if not "%XSRC%"=="." goto SmallEnv
-if "%1%"=="" goto SrcDone
-set XSRC=%1
-if not "%XSRC%"=="%1" goto SmallEnv
-
-:SrcDone
-
-update %XSRC%/configh.dos ./config.h
-
-rem Do they have Make?
-redir -o junk.$$$ -eo make -n -f NUL
-rem REDIR will return 1 if it cannot run Make.
-rem If it can run Make, it will usually return 2,
-rem but 0 is also OK with us.
-if errorlevel 2 goto MakeOk
-if not errorlevel 1 goto MakeOk
-if exist junk.$$$ del junk.$$$
-echo No Make program found--use DOSBUILD.BAT to build Make.
-goto End
-
-rem They do have Make.	Generate the Makefile.
-
-:MakeOk
-del junk.$$$
-update %XSRC%/Makefile.DOS ./Makefile
-echo Done.
-if not "%XSRC%"=="." echo Invoke Make thus: "make srcdir=%XSRC%"
-goto End
-
-:SmallEnv
-echo Your environment is too small.  Please enlarge it and run me again.
-
-:End
-set XRSC=

buildtools/windows/source/make-3.79.1/configure.in

@@ -1,320 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-AC_REVISION([$Id: configure.in,v 1.1 2001-01-21 08:05:38 bryner%uiuc.edu Exp $])
-AC_PREREQ(2.13)dnl		dnl Minimum Autoconf version required.
-AC_INIT(vpath.c)dnl		dnl A distinctive file to look for in srcdir.
-
-AM_INIT_AUTOMAKE(make, 3.79.1)
-AM_CONFIG_HEADER(config.h)
-
-dnl Regular configure stuff
-
-AC_CANONICAL_HOST
-AC_PROG_MAKE_SET
-AC_PROG_CC
-AC_PROG_INSTALL
-AC_CHECK_PROG(AR, ar, ar, ar)
-AC_PROG_RANLIB
-AC_PROG_CPP			dnl Later checks need this.
-AC_AIX
-AC_ISC_POSIX
-AC_MINIX
-
-AC_CHECK_PROG(PERL, perl, perl, perl)	dnl Needed for the test suite (only)
-
-dnl This test must come as early as possible after the compiler configuration
-dnl tests, because the choice of the file model can (in principle) affect
-dnl whether functions and headers are available, whether they work, etc.
-AC_SYS_LARGEFILE
-
-AC_HEADER_STDC
-AC_HEADER_DIRENT
-AC_TYPE_UID_T			dnl Also does gid_t.
-AC_TYPE_PID_T
-AC_TYPE_SIGNAL
-AC_CHECK_HEADERS(stdlib.h unistd.h limits.h sys/param.h fcntl.h string.h \
-		 memory.h sys/time.h sys/timeb.h)
-AC_PROG_CC_C_O
-AM_PROG_CC_STDC
-AC_C_CONST			dnl getopt needs this.
-AC_C_INLINE			dnl gettext needs this.
-AC_HEADER_STAT
-AC_HEADER_TIME
-
-dnl Handle internationalization
-
-ALL_LINGUAS="de es fr ja ko nl pl pt_BR ru"
-pds_WITH_GETTEXT
-
-
-dnl See if the user wants nsec timestamps
-
-AC_ARG_ENABLE(nsec-timestamps,
-  [  --disable-nsec-timestamps disable use of sub-second timestamps],
-  [make_cv_nsec_timestamps="$enableval"],
-  [make_cv_nsec_timestamps="yes"])
-
-if test "x$make_cv_nsec_timestamps" != xno; then
-  AC_STRUCT_ST_MTIM_NSEC
-fi
-jm_AC_TYPE_UINTMAX_T
-
-AC_SUBST(LIBOBJS)
-
-AC_DEFUN(AC_CHECK_SYMBOL, [dnl
-AC_MSG_CHECKING(for $1)
-AC_CACHE_VAL(ac_cv_check_symbol_$1, [dnl
-AC_TRY_LINK(, [extern char *sys_siglist[]; puts(*sys_siglist);],
-	    ac_cv_check_symbol_$1=yes, ac_cv_check_symbol_$1=no)])
-if test "$ac_cv_check_symbol_$1" = yes; then
-changequote(,)dnl
-  ac_tr_symbol=`echo $1 | tr '[a-z]' '[A-Z]'`
-changequote([,])dnl
-  AC_DEFINE_UNQUOTED(HAVE_${ac_tr_symbol})
-fi
-AC_MSG_RESULT($ac_cv_check_symbol_$1)])dnl
-
-# Solaris 2.5.1 needs -lposix4 to get the clock_gettime function.
-# Solaris 7 prefers the library name -lrt to the obsolescent name -lposix4.
-AC_SEARCH_LIBS(clock_gettime, [rt posix4])
-if test "$ac_cv_search_clock_gettime" != no; then
-  AC_DEFINE(HAVE_CLOCK_GETTIME, 1,
-            [Define if you have the clock_gettime function.])
-fi
-
-# See if we have a standard version of gettimeofday().  Since actual
-# implementations can differ, just make sure we have the most common
-# one.
-AC_CACHE_CHECK([for standard gettimeofday], ac_cv_func_gettimeofday,
-  [ac_cv_func_gettimeofday=no
-   AC_TRY_RUN([#include <sys/time.h>
-	       int main ()
-	       {
-		 struct timeval t; t.tv_sec = -1; t.tv_usec = -1;
-		 exit (gettimeofday (&t, 0) != 0
-		       || t.tv_sec < 0 || t.tv_usec < 0);
-	       }],
-	      ac_cv_func_gettimeofday=yes,
-	      ac_cv_func_gettimeofday=no,
-	      ac_cv_func_gettimeofday="no (cross-compiling)")])
-if test $ac_cv_func_gettimeofday = yes; then
-  AC_DEFINE(HAVE_GETTIMEOFDAY, 1,
-	    [Define if you have a standard gettimeofday function])
-fi
-
-AC_CHECK_FUNCS(	memmove memcpy strchr strdup psignal mkstemp mktemp fdopen \
-		dup2 getcwd sigsetmask sigaction getgroups setlinebuf \
-		seteuid setegid setreuid setregid pipe strerror strsignal)
-
-AC_CHECK_SYMBOL(sys_siglist)
-AC_FUNC_ALLOCA
-AC_FUNC_VFORK
-AC_FUNC_VPRINTF
-AC_FUNC_STRCOLL
-AC_FUNC_CLOSEDIR_VOID
-AC_FUNC_SETVBUF_REVERSED
-
-AC_CHECK_LIB(kstat, kstat_open) dnl _Must_ come before AC_FUNC_GETLOADAVG.
-AC_CHECK_FUNCS(pstat_getdynamic) dnl Supposedly in AC_FUNC_GETLOADAVG, but...?
-AC_FUNC_GETLOADAVG
-
-# Check out the wait reality.
-AC_CHECK_HEADERS(sys/wait.h)
-AC_CHECK_FUNCS(waitpid wait3)
-AC_MSG_CHECKING(for union wait)
-AC_CACHE_VAL(make_cv_union_wait, [dnl
-AC_TRY_LINK([#include <sys/types.h>
-#include <sys/wait.h>],
-	    [union wait status; int pid; pid = wait (&status);
-#ifdef WEXITSTATUS
-/* Some POSIXoid systems have both the new-style macros and the old
-   union wait type, and they do not work together.  If union wait
-   conflicts with WEXITSTATUS et al, we don't want to use it at all.  */
-if (WEXITSTATUS (status) != 0) pid = -1;
-#ifdef WTERMSIG
-/* If we have WEXITSTATUS and WTERMSIG, just use them on ints.  */
--- blow chunks here --
-#endif
-#endif
-#ifdef HAVE_WAITPID
-/* Make sure union wait works with waitpid.  */
-pid = waitpid (-1, &status, 0);
-#endif
-],
-	    [make_cv_union_wait=yes], [make_cv_union_wait=no])])
-if test "$make_cv_union_wait" = yes; then
-  AC_DEFINE(HAVE_UNION_WAIT, 1, [Define this if you have the \`union wait' type in <sys/wait.h>.])
-fi
-AC_MSG_RESULT($make_cv_union_wait)
-
-AC_DECL_SYS_SIGLIST
-
-# The presence of the following is not meant to imply
-# that make necessarily works on those systems.
-AC_SEARCH_LIBS(getpwnam, sun)
-
-AC_SUBST(REMOTE) REMOTE=stub
-make_try_customs=no
-AC_ARG_WITH(customs,
-[  --with-customs=DIR      Enable remote jobs via Customs--see README.customs],
-[case "$withval" in
-  n|no) ;;
-  *) make_cppflags="$CPPFLAGS"
-     case "$withval" in
-       y|ye|yes) ;;
-       *) CPPFLAGS="$CPPFLAGS -I$with_customs/include/customs"
-	  make_ldflags="$LDFLAGS -L$with_customs/lib" ;;
-     esac
-     CF_NETLIBS
-     AC_CHECK_HEADER(customs.h,
-	             REMOTE=cstms
-                       LIBS="$LIBS -lcustoms" LDFLAGS="$make_ldflags",
-		     with_customs=no
-                       CPPFLAGS="$make_cppflags" make_badcust=yes)
-     ;;
-esac])
-
-dnl See if we can handle the job server feature, and if the user wants it.
-
-AC_ARG_ENABLE(job-server,
-  [  --disable-job-server    Disallow recursive make communication during -jN],
-  [make_cv_job_server="$enableval" user_job_server="$enableval"],
-  [make_cv_job_server="yes"])
-
-has_wait_nohang=yes
-case "$ac_cv_func_waitpid/$ac_cv_func_wait3" in
-  no/no) has_wait_nohang=no ;;
-esac
-
-case "$ac_cv_func_pipe/$ac_cv_func_sigaction/$has_wait_nohang/$make_cv_job_server" in
-  yes/yes/yes/yes) AC_DEFINE(MAKE_JOBSERVER, 1,
-                     [Define this to enable job server support in GNU make.]);;
-esac
-
-dnl Allow building with dmalloc
-
-AC_ARG_ENABLE(dmalloc,
-  [  --enable-dmalloc        Enable support for the dmalloc debugging library],
-  [make_cv_dmalloc="$enableval"],
-  [make_cv_dmalloc="no"])
-
-case "$make_cv_dmalloc" in
-  yes) AC_CHECK_HEADERS(dmalloc.h)
-       AC_CHECK_LIB(dmalloc, dmalloc_shutdown)
-       CPPFLAGS="$CPPFLAGS -DDMALLOC_FUNC_CHECK" ;;
-esac
-
-AC_CACHE_CHECK(for location of SCCS get command, make_cv_path_sccs_get, [
-if test -f /usr/sccs/get; then
-  make_cv_path_sccs_get=/usr/sccs/get
-else
-  make_cv_path_sccs_get=get
-fi])
-AC_DEFINE_UNQUOTED(SCCS_GET,["$make_cv_path_sccs_get"])
-
-ac_clean_files="$ac_clean_files s.conftest conftoast" # Remove these later.
-if ( /usr/sccs/admin -n s.conftest || admin -n s.conftest ) >/dev/null 2>&1 &&
-   test -f s.conftest; then
-  # We successfully created an SCCS file.
-  AC_CACHE_CHECK(if SCCS get command understands -G, make_cv_sys_get_minus_G, [
-    if $make_cv_path_sccs_get -Gconftoast s.conftest >/dev/null 2>&1 &&
-       test -f conftoast; then
-       make_cv_sys_get_minus_G=yes
-    else
-       make_cv_sys_get_minus_G=no
-    fi])
-  case "$make_cv_sys_get_minus_G" in
-    yes) AC_DEFINE(SCCS_GET_MINUS_G, 1,
-           [Define this if the SCCS \`get' command understands the \`-G<file>' option.]);;
-  esac
-fi
-rm -f s.conftest conftoast
-
-AC_MSG_CHECKING(if system libc has GNU glob)
-AC_CACHE_VAL(make_cv_sys_gnu_glob, [
- AC_TRY_CPP([
-#include <features.h>
-#include <glob.h>
-#include <fnmatch.h>
-
-#define GLOB_INTERFACE_VERSION 1
-#if defined _LIBC || !defined __GNU_LIBRARY__ || __GNU_LIBRARY__ <= 1
-# error no gnu glob
-#else
-# include <gnu-versions.h>
-# if _GNU_GLOB_INTERFACE_VERSION != GLOB_INTERFACE_VERSION
-#  error no gnu glob
-# endif
-#endif
- ], make_cv_sys_gnu_glob=yes, make_cv_sys_gnu_glob=no)])
-case "$make_cv_sys_gnu_glob" in
-  yes) AC_MSG_RESULT(yes) ;;
-  no)  AC_MSG_RESULT([no; using local copy])
-       AC_SUBST(GLOBDIR) GLOBDIR=glob
-       AC_SUBST(GLOBINC) GLOBINC='-I$(srcdir)/glob'
-       AC_SUBST(GLOBLIB) GLOBLIB=glob/libglob.a
-       ;;
-esac
-
-AC_DEFINE_UNQUOTED(MAKE_HOST,"$host",[Build host information.])
-MAKE_HOST="$host"
-AC_SUBST(MAKE_HOST)
-
-MAINT_MAKEFILE=/dev/null
-if test -r "$srcdir/maintMakefile"; then
-  MAINT_MAKEFILE="$srcdir/maintMakefile"
-fi
-AC_SUBST_FILE(MAINT_MAKEFILE)
-
-AC_OUTPUT(build.sh Makefile glob/Makefile i18n/Makefile)
-
-dnl If we don't yet have build.sh.in, build.sh is a bogus 0-length file
-dnl so remove it.
-dnl Can't do this because then remote builds with build.sh don't work.
-dnl test -f build.sh.in || rm -f build.sh
-
-
-case "$make_badcust" in
-  yes) echo
-       echo "WARNING: --with-customs specified but no customs.h could be found;"
-       echo "         disabling Customs support."
-       echo ;;
-esac
-
-case "$with_customs" in
-  ""|n|no|y|ye|yes) ;;
-  *) if test -f "$with_customs/lib/libcustoms.a"; then
-       :
-     else
-       echo
-       echo "WARNING: \`$with_customs/lib' does not appear to contain the"
-       echo "         Customs library.  You must build and install Customs"
-       echo "         before compiling GNU make."
-       echo
-     fi ;;
-esac
-
-case "$has_wait_nohang" in
-  no) echo
-      echo "WARNING: Your system has neither waitpid() nor wait3()."
-      echo "         Without one of these, signal handling is unreliable."
-      echo "         You should be aware that running GNU make with -j"
-      echo "         could result in erratic behavior."
-      echo ;;
-esac
-
-case "$make_cv_job_server/$user_job_server" in
-  no/yes) echo
-	  echo "WARNING: Make job server requires a POSIX-ish system that"
-	  echo "         supports the pipe(), sigaction(), and either"
-          echo "         waitpid() or wait3() functions.  Your system doesn't"
-	  echo "         appear to provide one or more of those."
-	  echo "         Disabling job server support."
-          echo ;;
-esac
-
-dnl Local Variables:
-dnl comment-start: "dnl "
-dnl comment-end: ""
-dnl comment-start-skip: "\\bdnl\\b\\s *"
-dnl compile-command: "make configure config.h.in"
-dnl End:

buildtools/windows/source/make-3.79.1/debug.h

@@ -1,41 +0,0 @@
-/* Debugging macros and interface.
-Copyright (C) 1999 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU Make is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-
-#define DB_NONE         (0x000)
-#define DB_BASIC        (0x001)
-#define DB_VERBOSE      (0x002)
-#define DB_JOBS         (0x004)
-#define DB_IMPLICIT     (0x008)
-#define DB_MAKEFILES    (0x100)
-
-#define DB_ALL          (0xfff)
-
-extern int db_level;
-
-#define ISDB(_l)    ((_l)&db_level)
-
-#define DBS(_l,_x)  do{ if(ISDB(_l)) {print_spaces (depth); \
-                                      printf _x; fflush (stdout);} }while(0)
-
-#define DBF(_l,_x)  do{ if(ISDB(_l)) {print_spaces (depth); \
-                                      printf (_x, file->name); \
-                                      fflush (stdout);} }while(0)
-
-#define DB(_l,_x)   do{ if(ISDB(_l)) {printf _x; fflush (stdout);} }while(0)

buildtools/windows/source/make-3.79.1/default.c

@@ -1,585 +0,0 @@
-/* Data base of default implicit rules for GNU Make.
-Copyright (C) 1988,89,90,91,92,93,94,95,96 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU Make is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#include "make.h"
-#include "rule.h"
-#include "dep.h"
-#include "filedef.h"
-#include "job.h"
-#include "commands.h"
-#include "variable.h"
-
-/* Define GCC_IS_NATIVE if gcc is the native development environment on
-   your system (gcc/bison/flex vs cc/yacc/lex).  */
-#ifdef __MSDOS__
-#define GCC_IS_NATIVE
-#endif
-
-
-/* This is the default list of suffixes for suffix rules.
-   `.s' must come last, so that a `.o' file will be made from
-   a `.c' or `.p' or ... file rather than from a .s file.  */
-
-static char default_suffixes[]
-#ifdef VMS
-  = ".exe .olb .ln .obj .c .cxx .cc .pas .p .for .f .r .y .l .mar \
-.s .ss .i .ii .mod .sym .def .h .info .dvi .tex .texinfo .texi .txinfo \
-.w .ch .cweb .web .com .sh .elc .el";
-#else
-  = ".out .a .ln .o .c .cc .C .cpp .p .f .F .r .y .l .s .S \
-.mod .sym .def .h .info .dvi .tex .texinfo .texi .txinfo \
-.w .ch .web .sh .elc .el";
-#endif
-
-static struct pspec default_pattern_rules[] =
-  {
-    { "(%)", "%",
-	"$(AR) $(ARFLAGS) $@ $<" },
-
-    /* The X.out rules are only in BSD's default set because
-       BSD Make has no null-suffix rules, so `foo.out' and
-       `foo' are the same thing.  */
-#ifdef VMS
-    { "%.exe", "%",
-        "copy $< $@" },
-#else
-    { "%.out", "%",
-	"@rm -f $@ \n cp $< $@" },
-#endif
-    /* Syntax is "ctangle foo.w foo.ch foo.c".  */
-    { "%.c", "%.w %.ch",
-	"$(CTANGLE) $^ $@" },
-    { "%.tex", "%.w %.ch",
-	"$(CWEAVE) $^ $@" },
-
-    { 0, 0, 0 }
-  };
-
-static struct pspec default_terminal_rules[] =
-  {
-#ifdef VMS
-    /* RCS.  */
-    { "%", "%$$5lv", /* Multinet style */
-        "if f$$search($@) .nes. \"\" then +$(CHECKOUT,v)" },
-    { "%", "[.$$rcs]%$$5lv", /* Multinet style */
-        "if f$$search($@) .nes. \"\" then +$(CHECKOUT,v)" },
-    { "%", "%_v", /* Normal style */
-        "if f$$search($@) .nes. \"\" then +$(CHECKOUT,v)" },
-    { "%", "[.rcs]%_v", /* Normal style */
-        "if f$$search($@) .nes. \"\" then +$(CHECKOUT,v)" },
-
-    /* SCCS.  */
-	/* ain't no SCCS on vms */
-#else
-    /* RCS.  */
-    { "%", "%,v",
-	"$(CHECKOUT,v)" },
-    { "%", "RCS/%,v",
-	"$(CHECKOUT,v)" },
-    { "%", "RCS/%",
-	"$(CHECKOUT,v)" },
-
-    /* SCCS.  */
-    { "%", "s.%",
-	"$(GET) $(GFLAGS) $(SCCS_OUTPUT_OPTION) $<" },
-    { "%", "SCCS/s.%",
-	"$(GET) $(GFLAGS) $(SCCS_OUTPUT_OPTION) $<" },
-#endif /* !VMS */
-    { 0, 0, 0 }
-  };
-
-static char *default_suffix_rules[] =
-  {
-#ifdef VMS
-    ".obj.exe",
-    "$(LINK.obj) $^ $(LOADLIBES) $(LDLIBS) $(CRT0) /exe=$@",
-    ".mar.exe",
-    "$(COMPILE.mar) $^ \n $(LINK.obj) $(subst .mar,.obj,$^) $(LOADLIBES) $(LDLIBS) $(CRT0) /exe=$@",
-    ".s.exe",
-    "$(COMPILE.s) $^ \n $(LINK.obj) $(subst .s,.obj,$^) $(LOADLIBES) $(LDLIBS) $(CRT0) /exe=$@",
-    ".c.exe",
-    "$(COMPILE.c) $^ \n $(LINK.obj) $(subst .c,.obj,$^) $(LOADLIBES) $(LDLIBS) $(CRT0) /exe=$@",
-    ".cc.exe",
-#ifdef GCC_IS_NATIVE
-    "$(COMPILE.cc) $^ \n $(LINK.obj) $(CXXSTARTUP),sys$$disk:[]$(subst .cc,.obj,$^) $(LOADLIBES) $(LXLIBS) $(LDLIBS) $(CXXRT0) /exe=$@",
-#else
-    "$(COMPILE.cc) $^ \n $(CXXLINK.obj) $(subst .cc,.obj,$^) $(LOADLIBES) $(LXLIBS) $(LDLIBS) $(CXXRT0) /exe=$@",
-    ".cxx.exe",
-    "$(COMPILE.cxx) $^ \n $(CXXLINK.obj) $(subst .cxx,.obj,$^) $(LOADLIBES) $(LXLIBS) $(LDLIBS) $(CXXRT0) /exe=$@",
-#endif
-    ".for.exe",
-    "$(COMPILE.for) $^ \n $(LINK.obj) $(subst .for,.obj,$^) $(LOADLIBES) $(LDLIBS) /exe=$@",
-    ".pas.exe",
-    "$(COMPILE.pas) $^ \n $(LINK.obj) $(subst .pas,.obj,$^) $(LOADLIBES) $(LDLIBS) /exe=$@",
-
-    ".com",
-    "copy $< >$@",
-
-    ".mar.obj",
-    "$(COMPILE.mar) /obj=$@ $<",
-    ".s.obj",
-    "$(COMPILE.s) /obj=$@ $<",
-    ".ss.obj",
-    "$(COMPILE.s) /obj=$@ $<",
-    ".c.i",
-    "$(COMPILE.c)/prep /list=$@ $<",
-    ".c.s",
-    "$(COMPILE.c)/noobj/machine /list=$@ $<",
-    ".i.s",
-    "$(COMPILE.c)/noprep/noobj/machine /list=$@ $<",
-    ".c.obj",
-    "$(COMPILE.c) /obj=$@ $<",
-    ".cc.ii",
-    "$(COMPILE.cc)/prep /list=$@ $<",
-    ".cc.ss",
-    "$(COMPILE.cc)/noobj/machine /list=$@ $<",
-    ".ii.ss",
-    "$(COMPILE.cc)/noprep/noobj/machine /list=$@ $<",
-    ".cc.obj",
-    "$(COMPILE.cc) /obj=$@ $<",
-    ".for.obj",
-    "$(COMPILE.for) /obj=$@ $<",
-    ".pas.obj",
-    "$(COMPILE.pas) /obj=$@ $<",
-
-    ".y.c",
-    "$(YACC.y) $< \n rename y_tab.c $@",
-    ".l.c",
-    "$(LEX.l) $< \n rename lexyy.c $@",
-
-    ".texinfo.info",
-    "$(MAKEINFO) $<",
-
-    ".tex.dvi",
-    "$(TEX) $<",
-
-#else /* ! VMS */
-
-    ".o",
-    "$(LINK.o) $^ $(LOADLIBES) $(LDLIBS) -o $@",
-    ".s",
-    "$(LINK.s) $^ $(LOADLIBES) $(LDLIBS) -o $@",
-    ".S",
-    "$(LINK.S) $^ $(LOADLIBES) $(LDLIBS) -o $@",
-    ".c",
-    "$(LINK.c) $^ $(LOADLIBES) $(LDLIBS) -o $@",
-    ".cc",
-    "$(LINK.cc) $^ $(LOADLIBES) $(LDLIBS) -o $@",
-    ".C",
-    "$(LINK.C) $^ $(LOADLIBES) $(LDLIBS) -o $@",
-    ".cpp",
-    "$(LINK.cpp) $^ $(LOADLIBES) $(LDLIBS) -o $@",
-    ".f",
-    "$(LINK.f) $^ $(LOADLIBES) $(LDLIBS) -o $@",
-    ".p",
-    "$(LINK.p) $^ $(LOADLIBES) $(LDLIBS) -o $@",
-    ".F",
-    "$(LINK.F) $^ $(LOADLIBES) $(LDLIBS) -o $@",
-    ".r",
-    "$(LINK.r) $^ $(LOADLIBES) $(LDLIBS) -o $@",
-    ".mod",
-    "$(COMPILE.mod) -o $@ -e $@ $^",
-
-    ".def.sym",
-    "$(COMPILE.def) -o $@ $<",
-
-    ".sh",
-    "cat $< >$@ \n chmod a+x $@",
-
-    ".s.o",
-    "$(COMPILE.s) -o $@ $<",
-    ".S.o",
-    "$(COMPILE.S) -o $@ $<",
-    ".c.o",
-    "$(COMPILE.c) $(OUTPUT_OPTION) $<",
-    ".cc.o",
-    "$(COMPILE.cc) $(OUTPUT_OPTION) $<",
-    ".C.o",
-    "$(COMPILE.C) $(OUTPUT_OPTION) $<",
-    ".cpp.o",
-    "$(COMPILE.cpp) $(OUTPUT_OPTION) $<",
-    ".f.o",
-    "$(COMPILE.f) $(OUTPUT_OPTION) $<",
-    ".p.o",
-    "$(COMPILE.p) $(OUTPUT_OPTION) $<",
-    ".F.o",
-    "$(COMPILE.F) $(OUTPUT_OPTION) $<",
-    ".r.o",
-    "$(COMPILE.r) $(OUTPUT_OPTION) $<",
-    ".mod.o",
-    "$(COMPILE.mod) -o $@ $<",
-
-    ".c.ln",
-    "$(LINT.c) -C$* $<",
-    ".y.ln",
-#ifndef __MSDOS__
-    "$(YACC.y) $< \n $(LINT.c) -C$* y.tab.c \n $(RM) y.tab.c",
-#else
-    "$(YACC.y) $< \n $(LINT.c) -C$* y_tab.c \n $(RM) y_tab.c",
-#endif
-    ".l.ln",
-    "@$(RM) $*.c\n $(LEX.l) $< > $*.c\n$(LINT.c) -i $*.c -o $@\n $(RM) $*.c",
-
-    ".y.c",
-#ifndef __MSDOS__
-    "$(YACC.y) $< \n mv -f y.tab.c $@",
-#else
-    "$(YACC.y) $< \n mv -f y_tab.c $@",
-#endif
-    ".l.c",
-    "@$(RM) $@ \n $(LEX.l) $< > $@",
-
-    ".F.f",
-    "$(PREPROCESS.F) $(OUTPUT_OPTION) $<",
-    ".r.f",
-    "$(PREPROCESS.r) $(OUTPUT_OPTION) $<",
-
-    /* This might actually make lex.yy.c if there's no %R%
-       directive in $*.l, but in that case why were you
-       trying to make $*.r anyway?  */
-    ".l.r",
-    "$(LEX.l) $< > $@ \n mv -f lex.yy.r $@",
-
-    ".S.s",
-    "$(PREPROCESS.S) $< > $@",
-
-    ".texinfo.info",
-    "$(MAKEINFO) $(MAKEINFO_FLAGS) $< -o $@",
-
-    ".texi.info",
-    "$(MAKEINFO) $(MAKEINFO_FLAGS) $< -o $@",
-
-    ".txinfo.info",
-    "$(MAKEINFO) $(MAKEINFO_FLAGS) $< -o $@",
-
-    ".tex.dvi",
-    "$(TEX) $<",
-
-    ".texinfo.dvi",
-    "$(TEXI2DVI) $(TEXI2DVI_FLAGS) $<",
-
-    ".texi.dvi",
-    "$(TEXI2DVI) $(TEXI2DVI_FLAGS) $<",
-
-    ".txinfo.dvi",
-    "$(TEXI2DVI) $(TEXI2DVI_FLAGS) $<",
-
-    ".w.c",
-    "$(CTANGLE) $< - $@",	/* The `-' says there is no `.ch' file.  */
-
-    ".web.p",
-    "$(TANGLE) $<",
-
-    ".w.tex",
-    "$(CWEAVE) $< - $@",	/* The `-' says there is no `.ch' file.  */
-
-    ".web.tex",
-    "$(WEAVE) $<",
-
-#endif /* !VMS */
-
-    0, 0,
-  };
-
-static char *default_variables[] =
-  {
-#ifdef VMS
-#ifdef __ALPHA
-    "ARCH", "ALPHA",
-#else
-    "ARCH", "VAX",
-#endif
-    "AR", "library/obj",
-    "ARFLAGS", "/replace",
-    "AS", "macro",
-    "MACRO", "macro",
-#ifdef GCC_IS_NATIVE
-    "CC", "gcc",
-#else
-    "CC", "cc",
-#endif
-    "CD", "builtin_cd",
-    "MAKE", "make",
-    "ECHO", "write sys$$output \"",
-#ifdef GCC_IS_NATIVE
-    "C++", "gcc/plus",
-    "CXX", "gcc/plus",
-#else
-    "C++", "cxx",
-    "CXX", "cxx",
-    "CXXLD", "cxxlink",
-#endif
-    "CO", "co",
-    "CPP", "$(CC) /preprocess_only",
-    "FC", "fortran",
-    /* System V uses these, so explicit rules using them should work.
-       However, there is no way to make implicit rules use them and FC.  */
-    "F77", "$(FC)",
-    "F77FLAGS", "$(FFLAGS)",
-    "LD", "link",
-    "LEX", "lex",
-    "PC", "pascal",
-    "YACC", "bison/yacc",
-    "YFLAGS", "/Define/Verbose",
-    "BISON", "bison",
-    "MAKEINFO", "makeinfo",
-    "TEX", "tex",
-    "TEXINDEX", "texindex",
-
-    "RM", "delete/nolog",
-
-    "CSTARTUP", "",
-#ifdef GCC_IS_NATIVE
-    "CRT0", ",sys$$library:vaxcrtl.olb/lib,gnu_cc_library:crt0.obj",
-    "CXXSTARTUP", "gnu_cc_library:crtbegin.obj",
-    "CXXRT0", ",sys$$library:vaxcrtl.olb/lib,gnu_cc_library:crtend.obj,gnu_cc_library:gxx_main.obj",
-    "LXLIBS", ",gnu_cc_library:libstdcxx.olb/lib,gnu_cc_library:libgccplus.olb/lib",
-    "LDLIBS", ",gnu_cc_library:libgcc.olb/lib",
-#else
-    "CRT0", "",
-    "CXXSTARTUP", "",
-    "CXXRT0", "",
-    "LXLIBS", "",
-    "LDLIBS", "",
-#endif
-
-    "LINK.obj", "$(LD) $(LDFLAGS)",
-#ifndef GCC_IS_NATIVE
-    "CXXLINK.obj", "$(CXXLD) $(LDFLAGS)",
-    "COMPILE.cxx", "$(CXX) $(CXXFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
-#endif
-    "COMPILE.c", "$(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
-    "COMPILE.cc", "$(CXX) $(CXXFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
-    "YACC.y", "$(YACC) $(YFLAGS)",
-    "LEX.l", "$(LEX) $(LFLAGS)",
-    "COMPILE.for", "$(FC) $(FFLAGS) $(TARGET_ARCH)",
-    "COMPILE.pas", "$(PC) $(PFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
-    "COMPILE.mar", "$(MACRO) $(MACROFLAGS)",
-    "COMPILE.s", "$(AS) $(ASFLAGS) $(TARGET_MACH)",
-    "LINT.c", "$(LINT) $(LINTFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
-
-    "MV", "rename/new_version",
-    "CP", "copy",
-
-#else /* !VMS */
-
-    "AR", "ar",
-    "ARFLAGS", "rv",
-    "AS", "as",
-#ifdef GCC_IS_NATIVE
-    "CC", "gcc",
-# ifdef __MSDOS__
-    "CXX", "gpp",	/* g++ is an invalid name on MSDOS */
-# else
-    "CXX", "gcc",
-# endif /* __MSDOS__ */
-#else
-    "CC", "cc",
-    "CXX", "g++",
-#endif
-
-    /* This expands to $(CO) $(COFLAGS) $< $@ if $@ does not exist,
-       and to the empty string if $@ does exist.  */
-    "CHECKOUT,v", "+$(if $(wildcard $@),,$(CO) $(COFLAGS) $< $@)",
-    "CO", "co",
-    "COFLAGS", "",
-
-    "CPP", "$(CC) -E",
-#ifdef	CRAY
-    "CF77PPFLAGS", "-P",
-    "CF77PP", "/lib/cpp",
-    "CFT", "cft77",
-    "CF", "cf77",
-    "FC", "$(CF)",
-#else	/* Not CRAY.  */
-#ifdef	_IBMR2
-    "FC", "xlf",
-#else
-#ifdef	__convex__
-    "FC", "fc",
-#else
-    "FC", "f77",
-#endif /* __convex__ */
-#endif /* _IBMR2 */
-    /* System V uses these, so explicit rules using them should work.
-       However, there is no way to make implicit rules use them and FC.  */
-    "F77", "$(FC)",
-    "F77FLAGS", "$(FFLAGS)",
-#endif	/* Cray.  */
-    "GET", SCCS_GET,
-    "LD", "ld",
-#ifdef GCC_IS_NATIVE
-    "LEX", "flex",
-#else
-    "LEX", "lex",
-#endif
-    "LINT", "lint",
-    "M2C", "m2c",
-#ifdef	pyr
-    "PC", "pascal",
-#else
-#ifdef	CRAY
-    "PC", "PASCAL",
-    "SEGLDR", "segldr",
-#else
-    "PC", "pc",
-#endif	/* CRAY.  */
-#endif	/* pyr.  */
-#ifdef GCC_IS_NATIVE
-    "YACC", "bison -y",
-#else
-    "YACC", "yacc",	/* Or "bison -y"  */
-#endif
-    "MAKEINFO", "makeinfo",
-    "TEX", "tex",
-    "TEXI2DVI", "texi2dvi",
-    "WEAVE", "weave",
-    "CWEAVE", "cweave",
-    "TANGLE", "tangle",
-    "CTANGLE", "ctangle",
-
-    "RM", "rm -f",
-
-    "LINK.o", "$(CC) $(LDFLAGS) $(TARGET_ARCH)",
-    "COMPILE.c", "$(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c",
-    "LINK.c", "$(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
-    "COMPILE.cc", "$(CXX) $(CXXFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c",
-    "COMPILE.C", "$(COMPILE.cc)",
-    "COMPILE.cpp", "$(COMPILE.cc)",
-    "LINK.cc", "$(CXX) $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
-    "LINK.C", "$(LINK.cc)",
-    "LINK.cpp", "$(LINK.cc)",
-    "YACC.y", "$(YACC) $(YFLAGS)",
-    "LEX.l", "$(LEX) $(LFLAGS) -t",
-    "COMPILE.f", "$(FC) $(FFLAGS) $(TARGET_ARCH) -c",
-    "LINK.f", "$(FC) $(FFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
-    "COMPILE.F", "$(FC) $(FFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c",
-    "LINK.F", "$(FC) $(FFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
-    "COMPILE.r", "$(FC) $(FFLAGS) $(RFLAGS) $(TARGET_ARCH) -c",
-    "LINK.r", "$(FC) $(FFLAGS) $(RFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
-    "COMPILE.def", "$(M2C) $(M2FLAGS) $(DEFFLAGS) $(TARGET_ARCH)",
-    "COMPILE.mod", "$(M2C) $(M2FLAGS) $(MODFLAGS) $(TARGET_ARCH)",
-    "COMPILE.p", "$(PC) $(PFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c",
-    "LINK.p", "$(PC) $(PFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)",
-    "LINK.s", "$(CC) $(ASFLAGS) $(LDFLAGS) $(TARGET_MACH)",
-    "COMPILE.s", "$(AS) $(ASFLAGS) $(TARGET_MACH)",
-    "LINK.S", "$(CC) $(ASFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_MACH)",
-    "COMPILE.S", "$(CC) $(ASFLAGS) $(CPPFLAGS) $(TARGET_MACH) -c",
-    "PREPROCESS.S", "$(CC) -E $(CPPFLAGS)",
-    "PREPROCESS.F", "$(FC) $(FFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -F",
-    "PREPROCESS.r", "$(FC) $(FFLAGS) $(RFLAGS) $(TARGET_ARCH) -F",
-    "LINT.c", "$(LINT) $(LINTFLAGS) $(CPPFLAGS) $(TARGET_ARCH)",
-
-#ifndef	NO_MINUS_C_MINUS_O
-    "OUTPUT_OPTION", "-o $@",
-#endif
-
-#ifdef	SCCS_GET_MINUS_G
-    "SCCS_OUTPUT_OPTION", "-G$@",
-#endif
-
-#ifdef _AMIGA
-    ".LIBPATTERNS", "%.lib",
-#else
-#ifdef __MSDOS__
-    ".LIBPATTERNS", "lib%.a $(DJDIR)/lib/lib%.a",
-#else
-    ".LIBPATTERNS", "lib%.so lib%.a",
-#endif
-#endif
-
-#endif /* !VMS */
-    0, 0
-  };
-
-/* Set up the default .SUFFIXES list.  */
-
-void
-set_default_suffixes ()
-{
-  suffix_file = enter_file (".SUFFIXES");
-
-  if (no_builtin_rules_flag)
-    (void) define_variable ("SUFFIXES", 8, "", o_default, 0);
-  else
-    {
-      char *p = default_suffixes;
-      suffix_file->deps = (struct dep *)
-	multi_glob (parse_file_seq (&p, '\0', sizeof (struct dep), 1),
-		    sizeof (struct dep));
-      (void) define_variable ("SUFFIXES", 8, default_suffixes, o_default, 0);
-    }
-}
-
-/* Enter the default suffix rules as file rules.  This used to be done in
-   install_default_implicit_rules, but that loses because we want the
-   suffix rules installed before reading makefiles, and thee pattern rules
-   installed after.  */
-
-void
-install_default_suffix_rules ()
-{
-  register char **s;
-
-  if (no_builtin_rules_flag)
-    return;
-
- for (s = default_suffix_rules; *s != 0; s += 2)
-    {
-      register struct file *f = enter_file (s[0]);
-      /* Don't clobber cmds given in a makefile if there were any.  */
-      if (f->cmds == 0)
-	{
-	  f->cmds = (struct commands *) xmalloc (sizeof (struct commands));
-	  f->cmds->fileinfo.filenm = 0;
-	  f->cmds->commands = s[1];
-	  f->cmds->command_lines = 0;
-	}
-    }
-}
-
-
-/* Install the default pattern rules.  */
-
-void
-install_default_implicit_rules ()
-{
-  register struct pspec *p;
-
-  if (no_builtin_rules_flag)
-    return;
-
-  for (p = default_pattern_rules; p->target != 0; ++p)
-    install_pattern_rule (p, 0);
-
-  for (p = default_terminal_rules; p->target != 0; ++p)
-    install_pattern_rule (p, 1);
-}
-
-void
-define_default_variables ()
-{
-  register char **s;
-
-  if (no_builtin_variables_flag)
-    return;
-
-  for (s = default_variables; *s != 0; s += 2)
-    (void) define_variable (s[0], strlen (s[0]), s[1], o_default, 1);
-}

buildtools/windows/source/make-3.79.1/dep.h

@@ -1,76 +0,0 @@
-/* Definitions of dependency data structures for GNU Make.
-Copyright (C) 1988, 1989, 1991, 1992, 1993, 1996 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU Make is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* Flag bits for the second argument to `read_makefile'.
-   These flags are saved in the `changed' field of each
-   `struct dep' in the chain returned by `read_all_makefiles'.  */
-
-#define RM_NO_DEFAULT_GOAL	(1 << 0) /* Do not set default goal.  */
-#define RM_INCLUDED		(1 << 1) /* Search makefile search path.  */
-#define RM_DONTCARE		(1 << 2) /* No error if it doesn't exist.  */
-#define RM_NO_TILDE		(1 << 3) /* Don't expand ~ in file name.  */
-#define RM_NOFLAG		0
-
-/* Structure representing one dependency of a file.
-   Each struct file's `deps' points to a chain of these,
-   chained through the `next'.
-
-   Note that the first two words of this match a struct nameseq.  */
-
-struct dep
-  {
-    struct dep *next;
-    char *name;
-    struct file *file;
-    int changed;
-  };
-
-
-/* Structure used in chains of names, for parsing and globbing.  */
-
-struct nameseq
-  {
-    struct nameseq *next;
-    char *name;
-  };
-
-
-extern struct nameseq *multi_glob PARAMS ((struct nameseq *chain, unsigned int size));
-#ifdef VMS
-extern struct nameseq *parse_file_seq ();
-#else
-extern struct nameseq *parse_file_seq PARAMS ((char **stringp, int stopchar, unsigned int size, int strip));
-#endif
-extern char *tilde_expand PARAMS ((char *name));
-
-#ifndef NO_ARCHIVES
-extern struct nameseq *ar_glob PARAMS ((char *arname, char *member_pattern, unsigned int size));
-#endif
-
-#ifndef	iAPX286
-#define dep_name(d) ((d)->name == 0 ? (d)->file->name : (d)->name)
-#else
-/* Buggy compiler can't hack this.  */
-extern char *dep_name ();
-#endif
-
-extern struct dep *copy_dep_chain PARAMS ((struct dep *d));
-extern struct dep *read_all_makefiles PARAMS ((char **makefiles));
-extern int update_goal_chain PARAMS ((struct dep *goals, int makefiles));
-extern void uniquize_deps PARAMS ((struct dep *));

buildtools/windows/source/make-3.79.1/dosbuild.bat

@@ -1,42 +0,0 @@
-@echo Building Make for MSDOS
-@rem Echo ON so they will see what is going on.
-@echo on
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g commands.c -o commands.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g job.c -o job.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g dir.c -o dir.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g file.c -o file.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g misc.c -o misc.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g main.c -o main.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -DINCLUDEDIR=\"c:/djgpp/include\" -O2 -g read.c -o read.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -DLIBDIR=\"c:/djgpp/lib\" -O2 -g remake.c -o remake.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g rule.c -o rule.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g implicit.c -o implicit.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g default.c -o default.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g variable.c -o variable.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g expand.c -o expand.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g function.c -o function.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g vpath.c -o vpath.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g version.c -o version.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g ar.c -o ar.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g arscan.c -o arscan.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g signame.c -o signame.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g remote-stub.c -o remote-stub.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g getopt.c -o getopt.o
-gcc  -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g getopt1.c -o getopt1.o
-@cd glob
-@if exist libglob.a del libglob.a
-gcc -I. -c -DHAVE_CONFIG_H -I.. -O2 -g glob.c -o glob.o
-gcc -I. -c -DHAVE_CONFIG_H -I.. -O2 -g fnmatch.c -o fnmatch.o
-ar rv libglob.a glob.o fnmatch.o
-@echo off
-cd ..
-echo commands.o > respf.$$$
-for %%f in (job dir file misc main read remake rule implicit default variable) do echo %%f.o >> respf.$$$
-for %%f in (expand function vpath version ar arscan signame remote-stub getopt getopt1) do echo %%f.o >> respf.$$$
-echo glob/libglob.a >> respf.$$$
-@echo Linking...
-@echo on
-gcc -o make.new @respf.$$$
-@if exist make.exe echo Make.exe is now built!
-@if not exist make.exe echo Make.exe build failed...
-@if exist make.exe del respf.$$$

buildtools/windows/source/make-3.79.1/expand.c

@@ -1,546 +0,0 @@
-/* Variable expansion functions for GNU Make.
-Copyright (C) 1988, 89, 91, 92, 93, 95 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU Make is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#include "make.h"
-
-#include <assert.h>
-
-#include "filedef.h"
-#include "job.h"
-#include "commands.h"
-#include "variable.h"
-#include "rule.h"
-
-/* The next two describe the variable output buffer.
-   This buffer is used to hold the variable-expansion of a line of the
-   makefile.  It is made bigger with realloc whenever it is too small.
-   variable_buffer_length is the size currently allocated.
-   variable_buffer is the address of the buffer.
-
-   For efficiency, it's guaranteed that the buffer will always have
-   VARIABLE_BUFFER_ZONE extra bytes allocated.  This allows you to add a few
-   extra chars without having to call a function.  Note you should never use
-   these bytes unless you're _sure_ you have room (you know when the buffer
-   length was last checked.  */
-
-#define VARIABLE_BUFFER_ZONE    5
-
-static unsigned int variable_buffer_length;
-char *variable_buffer;
-
-/* Subroutine of variable_expand and friends:
-   The text to add is LENGTH chars starting at STRING to the variable_buffer.
-   The text is added to the buffer at PTR, and the updated pointer into
-   the buffer is returned as the value.  Thus, the value returned by
-   each call to variable_buffer_output should be the first argument to
-   the following call.  */
-
-char *
-variable_buffer_output (ptr, string, length)
-     char *ptr, *string;
-     unsigned int length;
-{
-  register unsigned int newlen = length + (ptr - variable_buffer);
-
-  if ((newlen + VARIABLE_BUFFER_ZONE) > variable_buffer_length)
-    {
-      unsigned int offset = ptr - variable_buffer;
-      variable_buffer_length = (newlen + 100 > 2 * variable_buffer_length
-				? newlen + 100
-				: 2 * variable_buffer_length);
-      variable_buffer = (char *) xrealloc (variable_buffer,
-					   variable_buffer_length);
-      ptr = variable_buffer + offset;
-    }
-
-  bcopy (string, ptr, length);
-  return ptr + length;
-}
-
-/* Return a pointer to the beginning of the variable buffer.  */
-
-static char *
-initialize_variable_output ()
-{
-  /* If we don't have a variable output buffer yet, get one.  */
-
-  if (variable_buffer == 0)
-    {
-      variable_buffer_length = 200;
-      variable_buffer = (char *) xmalloc (variable_buffer_length);
-      variable_buffer[0] = '\0';
-    }
-
-  return variable_buffer;
-}
-
-/* Recursively expand V.  The returned string is malloc'd.  */
-
-static char *allocated_variable_append PARAMS ((struct variable *v));
-
-char *
-recursively_expand (v)
-     register struct variable *v;
-{
-  char *value;
-
-  if (v->expanding)
-    /* Expanding V causes infinite recursion.  Lose.  */
-    fatal (reading_file,
-           _("Recursive variable `%s' references itself (eventually)"),
-           v->name);
-
-  v->expanding = 1;
-  if (v->append)
-    value = allocated_variable_append (v);
-  else
-    value = allocated_variable_expand (v->value);
-  v->expanding = 0;
-
-  return value;
-}
-
-/* Warn that NAME is an undefined variable.  */
-
-#ifdef __GNUC__
-__inline
-#endif
-static void
-warn_undefined (name, length)
-     char *name;
-     unsigned int length;
-{
-  if (warn_undefined_variables_flag)
-    error (reading_file,
-           _("warning: undefined variable `%.*s'"), (int)length, name);
-}
-
-/* Expand a simple reference to variable NAME, which is LENGTH chars long.  */
-
-#ifdef __GNUC__
-__inline
-#endif
-static char *
-reference_variable (o, name, length)
-     char *o;
-     char *name;
-     unsigned int length;
-{
-  register struct variable *v;
-  char *value;
-
-  v = lookup_variable (name, length);
-
-  if (v == 0)
-    warn_undefined (name, length);
-
-  if (v == 0 || *v->value == '\0')
-    return o;
-
-  value = (v->recursive ? recursively_expand (v) : v->value);
-
-  o = variable_buffer_output (o, value, strlen (value));
-
-  if (v->recursive)
-    free (value);
-
-  return o;
-}
-
-/* Scan STRING for variable references and expansion-function calls.  Only
-   LENGTH bytes of STRING are actually scanned.  If LENGTH is -1, scan until
-   a null byte is found.
-
-   Write the results to LINE, which must point into `variable_buffer'.  If
-   LINE is NULL, start at the beginning of the buffer.
-   Return a pointer to LINE, or to the beginning of the buffer if LINE is
-   NULL.  */
-
-char *
-variable_expand_string (line, string, length)
-     register char *line;
-     char *string;
-     long length;
-{
-  register struct variable *v;
-  register char *p, *o, *p1;
-  char save_char = '\0';
-  unsigned int line_offset;
-
-  if (!line)
-    line = initialize_variable_output();
-
-  p = string;
-  o = line;
-  line_offset = line - variable_buffer;
-
-  if (length >= 0)
-    {
-      save_char = string[length];
-      string[length] = '\0';
-    }
-
-  while (1)
-    {
-      /* Copy all following uninteresting chars all at once to the
-         variable output buffer, and skip them.  Uninteresting chars end
-	 at the next $ or the end of the input.  */
-
-      p1 = strchr (p, '$');
-
-      o = variable_buffer_output (o, p, p1 != 0 ? p1 - p : strlen (p) + 1);
-
-      if (p1 == 0)
-	break;
-      p = p1 + 1;
-
-      /* Dispatch on the char that follows the $.  */
-
-      switch (*p)
-	{
-	case '$':
-	  /* $$ seen means output one $ to the variable output buffer.  */
-	  o = variable_buffer_output (o, p, 1);
-	  break;
-
-	case '(':
-	case '{':
-	  /* $(...) or ${...} is the general case of substitution.  */
-	  {
-	    char openparen = *p;
-	    char closeparen = (openparen == '(') ? ')' : '}';
-	    register char *beg = p + 1;
-	    int free_beg = 0;
-	    char *op, *begp;
-	    char *end, *colon;
-
-	    op = o;
-	    begp = p;
-	    if (handle_function (&op, &begp))
-	      {
-		o = op;
-		p = begp;
-		break;
-	      }
-
-	    /* Is there a variable reference inside the parens or braces?
-	       If so, expand it before expanding the entire reference.  */
-
-	    end = strchr (beg, closeparen);
-	    if (end == 0)
-              /* Unterminated variable reference.  */
-              fatal (reading_file, _("unterminated variable reference"));
-	    p1 = lindex (beg, end, '$');
-	    if (p1 != 0)
-	      {
-		/* BEG now points past the opening paren or brace.
-		   Count parens or braces until it is matched.  */
-		int count = 0;
-		for (p = beg; *p != '\0'; ++p)
-		  {
-		    if (*p == openparen)
-		      ++count;
-		    else if (*p == closeparen && --count < 0)
-		      break;
-		  }
-		/* If COUNT is >= 0, there were unmatched opening parens
-		   or braces, so we go to the simple case of a variable name
-		   such as `$($(a)'.  */
-		if (count < 0)
-		  {
-		    beg = expand_argument (beg, p); /* Expand the name.  */
-		    free_beg = 1; /* Remember to free BEG when finished.  */
-		    end = strchr (beg, '\0');
-		  }
-	      }
-	    else
-	      /* Advance P to the end of this reference.  After we are
-                 finished expanding this one, P will be incremented to
-                 continue the scan.  */
-	      p = end;
-
-	    /* This is not a reference to a built-in function and
-	       any variable references inside are now expanded.
-	       Is the resultant text a substitution reference?  */
-
-	    colon = lindex (beg, end, ':');
-	    if (colon != 0)
-	      {
-		/* This looks like a substitution reference: $(FOO:A=B).  */
-		char *subst_beg, *subst_end, *replace_beg, *replace_end;
-
-		subst_beg = colon + 1;
-		subst_end = strchr (subst_beg, '=');
-		if (subst_end == 0)
-		  /* There is no = in sight.  Punt on the substitution
-		     reference and treat this as a variable name containing
-		     a colon, in the code below.  */
-		  colon = 0;
-		else
-		  {
-		    replace_beg = subst_end + 1;
-		    replace_end = end;
-
-		    /* Extract the variable name before the colon
-		       and look up that variable.  */
-		    v = lookup_variable (beg, colon - beg);
-		    if (v == 0)
-		      warn_undefined (beg, colon - beg);
-
-		    if (v != 0 && *v->value != '\0')
-		      {
-			char *value = (v->recursive ? recursively_expand (v)
-				       : v->value);
-			char *pattern, *percent;
-			if (free_beg)
-			  {
-			    *subst_end = '\0';
-			    pattern = subst_beg;
-			  }
-			else
-			  {
-			    pattern = (char *) alloca (subst_end - subst_beg
-						       + 1);
-			    bcopy (subst_beg, pattern, subst_end - subst_beg);
-			    pattern[subst_end - subst_beg] = '\0';
-			  }
-			percent = find_percent (pattern);
-			if (percent != 0)
-			  {
-			    char *replace;
-			    if (free_beg)
-			      {
-				*replace_end = '\0';
-				replace = replace_beg;
-			      }
-			    else
-			      {
-				replace = (char *) alloca (replace_end
-							   - replace_beg
-							   + 1);
-				bcopy (replace_beg, replace,
-				       replace_end - replace_beg);
-				replace[replace_end - replace_beg] = '\0';
-			      }
-
-			    o = patsubst_expand (o, value, pattern, replace,
-						 percent, (char *) 0);
-			  }
-			else
-			  o = subst_expand (o, value,
-					    pattern, replace_beg,
-					    strlen (pattern),
-					    end - replace_beg,
-					    0, 1);
-			if (v->recursive)
-			  free (value);
-		      }
-		  }
-	      }
-
-	    if (colon == 0)
-	      /* This is an ordinary variable reference.
-		 Look up the value of the variable.  */
-		o = reference_variable (o, beg, end - beg);
-
-	  if (free_beg)
-	    free (beg);
-	  }
-	  break;
-
-	case '\0':
-	  break;
-
-	default:
-	  if (isblank ((unsigned char)p[-1]))
-	    break;
-
-	  /* A $ followed by a random char is a variable reference:
-	     $a is equivalent to $(a).  */
-	  {
-	    /* We could do the expanding here, but this way
-	       avoids code repetition at a small performance cost.  */
-	    char name[5];
-	    name[0] = '$';
-	    name[1] = '(';
-	    name[2] = *p;
-	    name[3] = ')';
-	    name[4] = '\0';
-	    p1 = allocated_variable_expand (name);
-	    o = variable_buffer_output (o, p1, strlen (p1));
-	    free (p1);
-	  }
-
-	  break;
-	}
-
-      if (*p == '\0')
-	break;
-      else
-	++p;
-    }
-
-  if (save_char)
-    string[length] = save_char;
-
-  (void)variable_buffer_output (o, "", 1);
-  return (variable_buffer + line_offset);
-}
-
-/* Scan LINE for variable references and expansion-function calls.
-   Build in `variable_buffer' the result of expanding the references and calls.
-   Return the address of the resulting string, which is null-terminated
-   and is valid only until the next time this function is called.  */
-
-char *
-variable_expand (line)
-     char *line;
-{
-  return variable_expand_string(NULL, line, (long)-1);
-}
-
-/* Expand an argument for an expansion function.
-   The text starting at STR and ending at END is variable-expanded
-   into a null-terminated string that is returned as the value.
-   This is done without clobbering `variable_buffer' or the current
-   variable-expansion that is in progress.  */
-
-char *
-expand_argument (str, end)
-     char *str, *end;
-{
-  char *tmp;
-
-  if (str == end)
-    return xstrdup("");
-
-  if (!end || *end == '\0')
-    tmp = str;
-  else
-    {
-      tmp = (char *) alloca (end - str + 1);
-      bcopy (str, tmp, end - str);
-      tmp[end - str] = '\0';
-    }
-
-  return allocated_variable_expand (tmp);
-}
-
-/* Expand LINE for FILE.  Error messages refer to the file and line where
-   FILE's commands were found.  Expansion uses FILE's variable set list.  */
-
-static char *
-variable_expand_for_file (line, file)
-     char *line;
-     register struct file *file;
-{
-  char *result;
-  struct variable_set_list *save;
-
-  if (file == 0)
-    return variable_expand (line);
-
-  save = current_variable_set_list;
-  current_variable_set_list = file->variables;
-  if (file->cmds && file->cmds->fileinfo.filenm)
-    reading_file = &file->cmds->fileinfo;
-  else
-    reading_file = 0;
-  result = variable_expand (line);
-  current_variable_set_list = save;
-  reading_file = 0;
-
-  return result;
-}
-
-/* Like allocated_variable_expand, but we first expand this variable in the
-    context of the next variable set, then we append the expanded value.  */
-
-static char *
-allocated_variable_append (v)
-     struct variable *v;
-{
-  struct variable_set_list *save;
-  int len = strlen (v->name);
-  char *var = alloca (len + 4);
-  char *value;
-
-  char *obuf = variable_buffer;
-  unsigned int olen = variable_buffer_length;
-
-  variable_buffer = 0;
-
-  assert(current_variable_set_list->next != 0);
-  save = current_variable_set_list;
-  current_variable_set_list = current_variable_set_list->next;
-
-  var[0] = '$';
-  var[1] = '(';
-  strcpy (&var[2], v->name);
-  var[len+2] = ')';
-  var[len+3] = '\0';
-
-  value = variable_expand_for_file (var, 0);
-
-  current_variable_set_list = save;
-
-  value += strlen (value);
-  value = variable_buffer_output (value, " ", 1);
-  value = variable_expand_string (value, v->value, (long)-1);
-
-  value = variable_buffer;
-
-#if 0
-  /* Waste a little memory and save time.  */
-  value = xrealloc (value, strlen (value))
-#endif
-
-  variable_buffer = obuf;
-  variable_buffer_length = olen;
-
-  return value;
-}
-
-/* Like variable_expand_for_file, but the returned string is malloc'd.
-   This function is called a lot.  It wants to be efficient.  */
-
-char *
-allocated_variable_expand_for_file (line, file)
-     char *line;
-     struct file *file;
-{
-  char *value;
-
-  char *obuf = variable_buffer;
-  unsigned int olen = variable_buffer_length;
-
-  variable_buffer = 0;
-
-  value = variable_expand_for_file (line, file);
-
-#if 0
-  /* Waste a little memory and save time.  */
-  value = xrealloc (value, strlen (value))
-#endif
-
-  variable_buffer = obuf;
-  variable_buffer_length = olen;
-
-  return value;
-}

buildtools/windows/source/make-3.79.1/file.c

@@ -1,797 +0,0 @@
-/* Target file hash table management for GNU Make.
-Copyright (C) 1988,89,90,91,92,93,94,95,96,97 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU Make is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#include "make.h"
-
-#include <assert.h>
-
-#include "dep.h"
-#include "filedef.h"
-#include "job.h"
-#include "commands.h"
-#include "variable.h"
-
-
-/* Hash table of files the makefile knows how to make.  */
-
-#ifndef	FILE_BUCKETS
-#define FILE_BUCKETS	1007
-#endif
-static struct file *files[FILE_BUCKETS];
-
-/* Whether or not .SECONDARY with no prerequisites was given.  */
-static int all_secondary = 0;
-
-/* Access the hash table of all file records.
-   lookup_file  given a name, return the struct file * for that name,
-           or nil if there is none.
-   enter_file   similar, but create one if there is none.  */
-
-struct file *
-lookup_file (name)
-     char *name;
-{
-  register struct file *f;
-  register char *n;
-  register unsigned int hashval;
-#if defined(VMS) && !defined(WANT_CASE_SENSITIVE_TARGETS)
-  register char *lname, *ln;
-#endif
-
-  assert (*name != '\0');
-
-  /* This is also done in parse_file_seq, so this is redundant
-     for names read from makefiles.  It is here for names passed
-     on the command line.  */
-#ifdef VMS
-# ifndef WANT_CASE_SENSITIVE_TARGETS
-  lname = (char *)malloc(strlen(name) + 1);
-  for (n=name, ln=lname; *n != '\0'; ++n, ++ln)
-    *ln = isupper((unsigned char)*n) ? tolower((unsigned char)*n) : *n;
-  *ln = '\0';
-  name = lname;
-# endif
-
-  while (name[0] == '[' && name[1] == ']' && name[2] != '\0')
-      name += 2;
-#endif
-  while (name[0] == '.' && name[1] == '/' && name[2] != '\0')
-    {
-      name += 2;
-      while (*name == '/')
-	/* Skip following slashes: ".//foo" is "foo", not "/foo".  */
-	++name;
-    }
-
-  if (*name == '\0')
-    /* It was all slashes after a dot.  */
-#ifdef VMS
-    name = "[]";
-#else
-#ifdef _AMIGA
-    name = "";
-#else
-    name = "./";
-#endif /* AMIGA */
-#endif /* VMS */
-
-  hashval = 0;
-  for (n = name; *n != '\0'; ++n)
-    HASHI (hashval, *n);
-  hashval %= FILE_BUCKETS;
-
-  for (f = files[hashval]; f != 0; f = f->next)
-    {
-      if (strieq (f->hname, name))
-	{
-#if defined(VMS) && !defined(WANT_CASE_SENSITIVE_TARGETS)
-	  free (lname);
-#endif
-	  return f;
-	}
-    }
-#if defined(VMS) && !defined(WANT_CASE_SENSITIVE_TARGETS)
-  free (lname);
-#endif
-  return 0;
-}
-
-struct file *
-enter_file (name)
-     char *name;
-{
-  register struct file *f, *new;
-  register char *n;
-  register unsigned int hashval;
-#if defined(VMS) && !defined(WANT_CASE_SENSITIVE_TARGETS)
-  char *lname, *ln;
-#endif
-
-  assert (*name != '\0');
-
-#if defined(VMS) && !defined(WANT_CASE_SENSITIVE_TARGETS)
-  lname = (char *)malloc (strlen (name) + 1);
-  for (n = name, ln = lname; *n != '\0'; ++n, ++ln)
-    {
-      if (isupper((unsigned char)*n))
-	*ln = tolower((unsigned char)*n);
-      else
-	*ln = *n;
-    }
-  *ln = 0;
-  /* Creates a possible leak, old value of name is unreachable, but I
-     currently don't know how to fix it. */
-  name = lname;
-#endif
-
-  hashval = 0;
-  for (n = name; *n != '\0'; ++n)
-    HASHI (hashval, *n);
-  hashval %= FILE_BUCKETS;
-
-  for (f = files[hashval]; f != 0; f = f->next)
-    if (strieq (f->hname, name))
-      break;
-
-  if (f != 0 && !f->double_colon)
-    {
-#if defined(VMS) && !defined(WANT_CASE_SENSITIVE_TARGETS)
-      free(lname);
-#endif
-      return f;
-    }
-
-  new = (struct file *) xmalloc (sizeof (struct file));
-  bzero ((char *) new, sizeof (struct file));
-  new->name = new->hname = name;
-  new->update_status = -1;
-
-  if (f == 0)
-    {
-      /* This is a completely new file.  */
-      new->next = files[hashval];
-      files[hashval] = new;
-    }
-  else
-    {
-      /* There is already a double-colon entry for this file.  */
-      new->double_colon = f;
-      while (f->prev != 0)
-	f = f->prev;
-      f->prev = new;
-    }
-
-  return new;
-}
-
-/* Rehash FILE to NAME.  This is not as simple as resetting
-   the `hname' member, since it must be put in a new hash bucket,
-   and possibly merged with an existing file called NAME.  */
-
-void
-rehash_file (file, name)
-     register struct file *file;
-     char *name;
-{
-  char *oldname = file->hname;
-  register unsigned int oldhash;
-  register char *n;
-
-  while (file->renamed != 0)
-    file = file->renamed;
-
-  /* Find the hash values of the old and new names.  */
-
-  oldhash = 0;
-  for (n = oldname; *n != '\0'; ++n)
-    HASHI (oldhash, *n);
-
-  file_hash_enter (file, name, oldhash, file->name);
-}
-
-/* Rename FILE to NAME.  This is not as simple as resetting
-   the `name' member, since it must be put in a new hash bucket,
-   and possibly merged with an existing file called NAME.  */
-
-void
-rename_file (file, name)
-     register struct file *file;
-     char *name;
-{
-  rehash_file(file, name);
-  while (file)
-    {
-      file->name = file->hname;
-      file = file->prev;
-    }
-}
-
-void
-file_hash_enter (file, name, oldhash, oldname)
-     register struct file *file;
-     char *name;
-     unsigned int oldhash;
-     char *oldname;
-{
-  unsigned int oldbucket = oldhash % FILE_BUCKETS;
-  register unsigned int newhash, newbucket;
-  struct file *oldfile;
-  register char *n;
-  register struct file *f;
-
-  newhash = 0;
-  for (n = name; *n != '\0'; ++n)
-    HASHI (newhash, *n);
-  newbucket = newhash % FILE_BUCKETS;
-
-  /* Look for an existing file under the new name.  */
-
-  for (oldfile = files[newbucket]; oldfile != 0; oldfile = oldfile->next)
-    if (strieq (oldfile->hname, name))
-      break;
-
-  /* If the old file is the same as the new file, never mind.  */
-  if (oldfile == file)
-    return;
-
-  if (oldhash != 0 && (newbucket != oldbucket || oldfile != 0))
-    {
-      /* Remove FILE from its hash bucket.  */
-
-      struct file *lastf = 0;
-
-      for (f = files[oldbucket]; f != file; f = f->next)
-	lastf = f;
-
-      if (lastf == 0)
-	files[oldbucket] = f->next;
-      else
-	lastf->next = f->next;
-    }
-
-  /* Give FILE its new name.  */
-
-  file->hname = name;
-  for (f = file->double_colon; f != 0; f = f->prev)
-    f->hname = name;
-
-  if (oldfile == 0)
-    {
-      /* There is no existing file with the new name.  */
-
-      if (newbucket != oldbucket)
-	{
-	  /* Put FILE in its new hash bucket.  */
-	  file->next = files[newbucket];
-	  files[newbucket] = file;
-	}
-    }
-  else
-    {
-      /* There is an existing file with the new name.
-	 We must merge FILE into the existing file.  */
-
-      register struct dep *d;
-
-      if (file->cmds != 0)
-	{
-	  if (oldfile->cmds == 0)
-	    oldfile->cmds = file->cmds;
-	  else if (file->cmds != oldfile->cmds)
-	    {
-	      /* We have two sets of commands.  We will go with the
-		 one given in the rule explicitly mentioning this name,
-		 but give a message to let the user know what's going on.  */
-	      if (oldfile->cmds->fileinfo.filenm != 0)
-                error (&file->cmds->fileinfo,
-                                _("Commands were specified for \
-file `%s' at %s:%lu,"),
-                                oldname, oldfile->cmds->fileinfo.filenm,
-                                oldfile->cmds->fileinfo.lineno);
-	      else
-		error (&file->cmds->fileinfo,
-				_("Commands for file `%s' were found by \
-implicit rule search,"),
-				oldname);
-	      error (&file->cmds->fileinfo,
-			      _("but `%s' is now considered the same file \
-as `%s'."),
-			      oldname, name);
-	      error (&file->cmds->fileinfo,
-			      _("Commands for `%s' will be ignored \
-in favor of those for `%s'."),
-			      name, oldname);
-	    }
-	}
-
-      /* Merge the dependencies of the two files.  */
-
-      d = oldfile->deps;
-      if (d == 0)
-	oldfile->deps = file->deps;
-      else
-	{
-	  while (d->next != 0)
-	    d = d->next;
-	  d->next = file->deps;
-	}
-
-      merge_variable_set_lists (&oldfile->variables, file->variables);
-
-      if (oldfile->double_colon && file->is_target && !file->double_colon)
-	fatal (NILF, _("can't rename single-colon `%s' to double-colon `%s'"),
-	       oldname, name);
-      if (!oldfile->double_colon  && file->double_colon)
-	{
-	  if (oldfile->is_target)
-	    fatal (NILF, _("can't rename double-colon `%s' to single-colon `%s'"),
-		   oldname, name);
-	  else
-	    oldfile->double_colon = file->double_colon;
-	}
-
-      if (file->last_mtime > oldfile->last_mtime)
-	/* %%% Kludge so -W wins on a file that gets vpathized.  */
-	oldfile->last_mtime = file->last_mtime;
-
-      oldfile->mtime_before_update = file->mtime_before_update;
-
-#define MERGE(field) oldfile->field |= file->field
-      MERGE (precious);
-      MERGE (tried_implicit);
-      MERGE (updating);
-      MERGE (updated);
-      MERGE (is_target);
-      MERGE (cmd_target);
-      MERGE (phony);
-      MERGE (ignore_vpath);
-#undef MERGE
-
-      file->renamed = oldfile;
-    }
-}
-
-/* Remove all nonprecious intermediate files.
-   If SIG is nonzero, this was caused by a fatal signal,
-   meaning that a different message will be printed, and
-   the message will go to stderr rather than stdout.  */
-
-void
-remove_intermediates (sig)
-     int sig;
-{
-  register int i;
-  register struct file *f;
-  char doneany;
-
-  /* If there's no way we will ever remove anything anyway, punt early.  */
-  if (question_flag || touch_flag || all_secondary)
-    return;
-
-  if (sig && just_print_flag)
-    return;
-
-  doneany = 0;
-  for (i = 0; i < FILE_BUCKETS; ++i)
-    for (f = files[i]; f != 0; f = f->next)
-      if (f->intermediate && (f->dontcare || !f->precious)
-	  && !f->secondary && !f->cmd_target)
-	{
-	  int status;
-	  if (f->update_status == -1)
-	    /* If nothing would have created this file yet,
-	       don't print an "rm" command for it.  */
-            continue;
- 	  if (just_print_flag)
-  	    status = 0;
-	  else
-	    {
-	      status = unlink (f->name);
-	      if (status < 0 && errno == ENOENT)
-		continue;
-	    }
-	  if (!f->dontcare)
-	    {
-	      if (sig)
-		error (NILF, _("*** Deleting intermediate file `%s'"), f->name);
-	      else if (!silent_flag)
-		{
-		  if (! doneany)
-		    {
-		      fputs ("rm ", stdout);
-		      doneany = 1;
-		    }
-		  else
-		    putchar (' ');
-		  fputs (f->name, stdout);
-		  fflush (stdout);
-		}
-	      if (status < 0)
-		perror_with_name ("unlink: ", f->name);
-	    }
-	}
-
-  if (doneany && !sig)
-    {
-      putchar ('\n');
-      fflush (stdout);
-    }
-}
-
-/* For each dependency of each file, make the `struct dep' point
-   at the appropriate `struct file' (which may have to be created).
-
-   Also mark the files depended on by .PRECIOUS, .PHONY, .SILENT,
-   and various other special targets.  */
-
-void
-snap_deps ()
-{
-  register struct file *f, *f2;
-  register struct dep *d;
-  register int i;
-
-  /* Enter each dependency name as a file.  */
-  for (i = 0; i < FILE_BUCKETS; ++i)
-    for (f = files[i]; f != 0; f = f->next)
-      for (f2 = f; f2 != 0; f2 = f2->prev)
-	for (d = f2->deps; d != 0; d = d->next)
-	  if (d->name != 0)
-	    {
-	      d->file = lookup_file (d->name);
-	      if (d->file == 0)
-		d->file = enter_file (d->name);
-	      else
-		free (d->name);
-	      d->name = 0;
-	    }
-
-  for (f = lookup_file (".PRECIOUS"); f != 0; f = f->prev)
-    for (d = f->deps; d != 0; d = d->next)
-      for (f2 = d->file; f2 != 0; f2 = f2->prev)
-	f2->precious = 1;
-
-  for (f = lookup_file (".PHONY"); f != 0; f = f->prev)
-    for (d = f->deps; d != 0; d = d->next)
-      for (f2 = d->file; f2 != 0; f2 = f2->prev)
-	{
-	  /* Mark this file as phony and nonexistent.  */
-	  f2->phony = 1;
-	  f2->last_mtime = NONEXISTENT_MTIME;
-	  f2->mtime_before_update = NONEXISTENT_MTIME;
-	}
-
-  for (f = lookup_file (".INTERMEDIATE"); f != 0; f = f->prev)
-    {
-      /* .INTERMEDIATE with deps listed
-	 marks those deps as intermediate files.  */
-      for (d = f->deps; d != 0; d = d->next)
-	for (f2 = d->file; f2 != 0; f2 = f2->prev)
-	  f2->intermediate = 1;
-      /* .INTERMEDIATE with no deps does nothing.
-	 Marking all files as intermediates is useless
-	 since the goal targets would be deleted after they are built.  */
-    }
-
-  for (f = lookup_file (".SECONDARY"); f != 0; f = f->prev)
-    {
-      /* .SECONDARY with deps listed
-	 marks those deps as intermediate files
-	 in that they don't get rebuilt if not actually needed;
-	 but unlike real intermediate files,
-	 these are not deleted after make finishes.  */
-      if (f->deps)
-        for (d = f->deps; d != 0; d = d->next)
-          for (f2 = d->file; f2 != 0; f2 = f2->prev)
-            f2->intermediate = f2->secondary = 1;
-      /* .SECONDARY with no deps listed marks *all* files that way.  */
-      else
-        all_secondary = 1;
-    }
-
-  f = lookup_file (".EXPORT_ALL_VARIABLES");
-  if (f != 0 && f->is_target)
-    export_all_variables = 1;
-
-  f = lookup_file (".IGNORE");
-  if (f != 0 && f->is_target)
-    {
-      if (f->deps == 0)
-	ignore_errors_flag = 1;
-      else
-	for (d = f->deps; d != 0; d = d->next)
-	  for (f2 = d->file; f2 != 0; f2 = f2->prev)
-	    f2->command_flags |= COMMANDS_NOERROR;
-    }
-
-  f = lookup_file (".SILENT");
-  if (f != 0 && f->is_target)
-    {
-      if (f->deps == 0)
-	silent_flag = 1;
-      else
-	for (d = f->deps; d != 0; d = d->next)
-	  for (f2 = d->file; f2 != 0; f2 = f2->prev)
-	    f2->command_flags |= COMMANDS_SILENT;
-    }
-
-  f = lookup_file (".POSIX");
-  if (f != 0 && f->is_target)
-    posix_pedantic = 1;
-
-  f = lookup_file (".NOTPARALLEL");
-  if (f != 0 && f->is_target)
-    not_parallel = 1;
-}
-
-/* Set the `command_state' member of FILE and all its `also_make's.  */
-
-void
-set_command_state (file, state)
-     struct file *file;
-     int state;
-{
-  struct dep *d;
-
-  file->command_state = state;
-
-  for (d = file->also_make; d != 0; d = d->next)
-    d->file->command_state = state;
-}
-
-/* Convert an external file timestamp to internal form.  */
-
-FILE_TIMESTAMP
-file_timestamp_cons (fname, s, ns)
-     char const *fname;
-     time_t s;
-     int ns;
-{
-  int offset = ORDINARY_MTIME_MIN + (FILE_TIMESTAMP_HI_RES ? ns : 0);
-  FILE_TIMESTAMP product = (FILE_TIMESTAMP) s << FILE_TIMESTAMP_LO_BITS;
-  FILE_TIMESTAMP ts = product + offset;
-
-  if (! (s <= FILE_TIMESTAMP_S (ORDINARY_MTIME_MAX)
-	 && product <= ts && ts <= ORDINARY_MTIME_MAX))
-    {
-      char buf[FILE_TIMESTAMP_PRINT_LEN_BOUND + 1];
-      ts = s <= OLD_MTIME ? ORDINARY_MTIME_MIN : ORDINARY_MTIME_MAX;
-      file_timestamp_sprintf (buf, ts);
-      error (NILF, _("%s: Timestamp out of range; substituting %s"),
-	     fname ? fname : _("Current time"), buf);
-    }
-
-  return ts;
-}
-
-/* Get and print file timestamps.  */
-
-FILE_TIMESTAMP
-file_timestamp_now ()
-{
-  time_t s;
-  int ns;
-
-  /* Don't bother with high-resolution clocks if file timestamps have
-     only one-second resolution.  The code below should work, but it's
-     not worth the hassle of debugging it on hosts where it fails.  */
-  if (FILE_TIMESTAMP_HI_RES)
-    {
-#if HAVE_CLOCK_GETTIME && defined CLOCK_REALTIME
-      {
-	struct timespec timespec;
-	if (clock_gettime (CLOCK_REALTIME, &timespec) == 0)
-	  {
-	    s = timespec.tv_sec;
-	    ns = timespec.tv_nsec;
-	    goto got_time;
-	  }
-      }
-#endif
-#if HAVE_GETTIMEOFDAY
-      {
-	struct timeval timeval;
-	if (gettimeofday (&timeval, 0) == 0)
-	  {
-	    s = timeval.tv_sec;
-	    ns = timeval.tv_usec * 1000;
-	    goto got_time;
-	  }
-      }
-#endif
-    }
-
-  s = time ((time_t *) 0);
-  ns = 0;
-
- got_time:
-  return file_timestamp_cons (0, s, ns);
-}
-
-void
-file_timestamp_sprintf (p, ts)
-     char *p;
-     FILE_TIMESTAMP ts;
-{
-  time_t t = FILE_TIMESTAMP_S (ts);
-  struct tm *tm = localtime (&t);
-
-  if (tm)
-    sprintf (p, "%04d-%02d-%02d %02d:%02d:%02d",
-	     tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
-	     tm->tm_hour, tm->tm_min, tm->tm_sec);
-  else if (t < 0)
-    sprintf (p, "%ld", (long) t);
-  else
-    sprintf (p, "%lu", (unsigned long) t);
-  p += strlen (p);
-
-  /* Append nanoseconds as a fraction, but remove trailing zeros.
-     We don't know the actual timestamp resolution, since clock_getres
-     applies only to local times, whereas this timestamp might come
-     from a remote filesystem.  So removing trailing zeros is the
-     best guess that we can do.  */
-  sprintf (p, ".%09ld", (long) FILE_TIMESTAMP_NS (ts));
-  p += strlen (p) - 1;
-  while (*p == '0')
-    p--;
-  p += *p != '.';
-
-  *p = '\0';
-}
-
-/* Print the data base of files.  */
-
-static void
-print_file (f)
-     struct file *f;
-{
-  register struct dep *d;
-
-  putchar ('\n');
-  if (!f->is_target)
-    puts (_("# Not a target:"));
-  printf ("%s:%s", f->name, f->double_colon ? ":" : "");
-
-  for (d = f->deps; d != 0; d = d->next)
-    printf (" %s", dep_name (d));
-  putchar ('\n');
-
-  if (f->precious)
-    puts (_("#  Precious file (prerequisite of .PRECIOUS)."));
-  if (f->phony)
-    puts (_("#  Phony target (prerequisite of .PHONY)."));
-  if (f->cmd_target)
-    puts (_("#  Command-line target."));
-  if (f->dontcare)
-    puts (_("#  A default or MAKEFILES makefile."));
-  puts (f->tried_implicit
-        ? _("#  Implicit rule search has been done.")
-        : _("#  Implicit rule search has not been done."));
-  if (f->stem != 0)
-    printf (_("#  Implicit/static pattern stem: `%s'\n"), f->stem);
-  if (f->intermediate)
-    puts (_("#  File is an intermediate prerequisite."));
-  if (f->also_make != 0)
-    {
-      fputs (_("#  Also makes:"), stdout);
-      for (d = f->also_make; d != 0; d = d->next)
-	printf (" %s", dep_name (d));
-      putchar ('\n');
-    }
-  if (f->last_mtime == UNKNOWN_MTIME)
-    puts (_("#  Modification time never checked."));
-  else if (f->last_mtime == NONEXISTENT_MTIME)
-    puts (_("#  File does not exist."));
-  else if (f->last_mtime == OLD_MTIME)
-    puts (_("#  File is very old."));
-  else
-    {
-      char buf[FILE_TIMESTAMP_PRINT_LEN_BOUND + 1];
-      file_timestamp_sprintf (buf, f->last_mtime);
-      printf (_("#  Last modified %s\n"), buf);
-    }
-  puts (f->updated
-        ? _("#  File has been updated.") : _("#  File has not been updated."));
-  switch (f->command_state)
-    {
-    case cs_running:
-      puts (_("#  Commands currently running (THIS IS A BUG)."));
-      break;
-    case cs_deps_running:
-      puts (_("#  Dependencies commands running (THIS IS A BUG)."));
-      break;
-    case cs_not_started:
-    case cs_finished:
-      switch (f->update_status)
-	{
-	case -1:
-	  break;
-	case 0:
-	  puts (_("#  Successfully updated."));
-	  break;
-	case 1:
-	  assert (question_flag);
-	  puts (_("#  Needs to be updated (-q is set)."));
-	  break;
-	case 2:
-	  puts (_("#  Failed to be updated."));
-	  break;
-	default:
-	  puts (_("#  Invalid value in `update_status' member!"));
-	  fflush (stdout);
-	  fflush (stderr);
-	  abort ();
-	}
-      break;
-    default:
-      puts (_("#  Invalid value in `command_state' member!"));
-      fflush (stdout);
-      fflush (stderr);
-      abort ();
-    }
-
-  if (f->variables != 0)
-    print_file_variables (f);
-
-  if (f->cmds != 0)
-    print_commands (f->cmds);
-}
-
-void
-print_file_data_base ()
-{
-  register unsigned int i, nfiles, per_bucket;
-  register struct file *file;
-
-  puts (_("\n# Files"));
-
-  per_bucket = nfiles = 0;
-  for (i = 0; i < FILE_BUCKETS; ++i)
-    {
-      register unsigned int this_bucket = 0;
-
-      for (file = files[i]; file != 0; file = file->next)
-	{
-	  register struct file *f;
-
-	  ++this_bucket;
-
-	  for (f = file; f != 0; f = f->prev)
-	    print_file (f);
-	}
-
-      nfiles += this_bucket;
-      if (this_bucket > per_bucket)
-	per_bucket = this_bucket;
-    }
-
-  if (nfiles == 0)
-    puts (_("\n# No files."));
-  else
-    {
-      printf (_("\n# %u files in %u hash buckets.\n"), nfiles, FILE_BUCKETS);
-#ifndef	NO_FLOAT
-      printf (_("# average %.3f files per bucket, max %u files in one bucket.\n"),
-	      ((double) nfiles) / ((double) FILE_BUCKETS), per_bucket);
-#endif
-    }
-}
-
-/* EOF */

buildtools/windows/source/make-3.79.1/filedef.h

@@ -1,199 +0,0 @@
-/* Definition of target file data structures for GNU Make.
-Copyright (C) 1988,89,90,91,92,93,94,97 Free Software Foundation, Inc.
-This file is part of GNU Make.
-
-GNU Make is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU Make is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Make; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-
-/* Structure that represents the info on one file
-   that the makefile says how to make.
-   All of these are chained together through `next'.  */
-
-struct file
-  {
-    struct file *next;
-    char *name;
-    char *hname;                /* Hashed filename */
-    char *vpath;                /* VPATH/vpath pathname */
-    struct dep *deps;
-    struct commands *cmds;	/* Commands to execute for this target.  */
-    int command_flags;		/* Flags OR'd in for cmds; see commands.h.  */
-    char *stem;			/* Implicit stem, if an implicit
-    				   rule has been used */
-    struct dep *also_make;	/* Targets that are made by making this.  */
-    FILE_TIMESTAMP last_mtime;	/* File's modtime, if already known.  */
-    FILE_TIMESTAMP mtime_before_update;	/* File's modtime before any updating
-                                           has been performed.  */
-    struct file *prev;		/* Previous entry for same file name;
-				   used when there are multiple double-colon
-				   entries for the same file.  */
-
-    /* File that this file was renamed to.  After any time that a
-       file could be renamed, call `check_renamed' (below).  */
-    struct file *renamed;
-
-    /* List of variable sets used for this file.  */
-    struct variable_set_list *variables;
-
-    /* Pattern-specific variable reference for this target, or null if there
-       isn't one.  Also see the pat_searched flag, below.  */
-    struct variable_set_list *pat_variables;
-
-    /* Immediate dependent that caused this target to be remade,
-       or nil if there isn't one.  */
-    struct file *parent;
-
-    /* For a double-colon entry, this is the first double-colon entry for
-       the same file.  Otherwise this is null.  */
-    struct file *double_colon;
-
-    short int update_status;	/* Status of the last attempt to update,
-				   or -1 if none has been made.  */
-
-    enum			/* State of the commands.  */
-      {		/* Note: It is important that cs_not_started be zero.  */
-	cs_not_started,		/* Not yet started.  */
-	cs_deps_running,	/* Dep commands running.  */
-	cs_running,		/* Commands running.  */
-	cs_finished		/* Commands finished.  */
-      } command_state ENUM_BITFIELD (2);
-
-    unsigned int precious:1;	/* Non-0 means don't delete file on quit */
-    unsigned int tried_implicit:1; /* Nonzero if have searched
-				      for implicit rule for making
-				      this file; don't search again.  */
-    unsigned int updating:1;	/* Nonzero while updating deps of this file */
-    unsigned int updated:1;	/* Nonzero if this file has been remade.  */
-    unsigned int is_target:1;	/* Nonzero if file is described as target.  */
-    unsigned int cmd_target:1;	/* Nonzero if file was given on cmd line.  */
-    unsigned int phony:1;	/* Nonzero if this is a phony file
-				   i.e., a dependency of .PHONY.  */
-    unsigned int intermediate:1;/* Nonzero if this is an intermediate file.  */
-    /* Nonzero, for an intermediate file,
-       means remove_intermediates should not delete it.  */
-    unsigned int secondary:1;
-    unsigned int dontcare:1;	/* Nonzero if no complaint is to be made if
-				   this target cannot be remade.  */
-    unsigned int ignore_vpath:1;/* Nonzero if we threw out VPATH name.  */
-    unsigned int pat_searched:1;/* Nonzero if we already searched for
-                                   pattern-specific variables.  */
-    unsigned int considered:1;  /* equal to `considered' if file has been
-                                   considered on current scan of goal chain */
-  };
-
-
-extern struct file *default_goal_file, *suffix_file, *default_file;
-
-
-extern struct file *lookup_file PARAMS ((char *name));
-extern struct file *enter_file PARAMS ((char *name));
-extern void remove_intermediates PARAMS ((int sig));
-extern void snap_deps PARAMS ((void));
-extern void rename_file PARAMS ((struct file *file, char *name));
-extern void rehash_file PARAMS ((struct file *file, char *name));
-extern void file_hash_enter PARAMS ((struct file *file, char *name,
-                                     unsigned int oldhash, char *oldname));
-extern void set_command_state PARAMS ((struct file *file, int state));
-extern void notice_finished_file PARAMS ((struct file *file));
-
-
-#ifdef ST_MTIM_NSEC
-# define FILE_TIMESTAMP_HI_RES \
-    (2147483647 < INTEGER_TYPE_MAXIMUM (FILE_TIMESTAMP) >> 31)
-# define FILE_TIMESTAMP_STAT_MODTIME(fname, st) \
-    file_timestamp_cons (fname, (st).st_mtime, (st).st_mtim.ST_MTIM_NSEC)
-#else
-# define FILE_TIMESTAMP_HI_RES 0
-# define FILE_TIMESTAMP_STAT_MODTIME(fname, st) \
-    file_timestamp_cons (fname, (st).st_mtime, 0)
-#endif
-
-/* If FILE_TIMESTAMP is 64 bits (or more), use nanosecond resolution.
-   (Multiply by 2**30 instead of by 10**9 to save time at the cost of
-   slightly decreasing the number of available timestamps.)  With
-   64-bit FILE_TIMESTAMP, this stops working on 2514-05-30 01:53:04
-   UTC, but by then uintmax_t should be larger than 64 bits.  */
-#define FILE_TIMESTAMPS_PER_S (FILE_TIMESTAMP_HI_RES ? 1000000000 : 1)
-#define FILE_TIMESTAMP_LO_BITS (FILE_TIMESTAMP_HI_RES ? 30 : 0)
-
-#define FILE_TIMESTAMP_S(ts) (((ts) - ORDINARY_MTIME_MIN) \
-			      >> FILE_TIMESTAMP_LO_BITS)
-#define FILE_TIMESTAMP_NS(ts) (((ts) - ORDINARY_MTIME_MIN) \
-			       & ((1 << FILE_TIMESTAMP_LO_BITS) - 1))
-
-/* Upper bound on length of string "YYYY-MM-DD HH:MM:SS.NNNNNNNNN"
-   representing a file timestamp.  The upper bound is not necessarily 19,
-   since the year might be less than -999 or greater than 9999.
-
-   Subtract one for the sign bit if in case file timestamps can be negative;
-   subtract FLOOR_LOG2_SECONDS_PER_YEAR to yield an upper bound on how many
-   file timestamp bits might affect the year;
-   302 / 1000 is log10 (2) rounded up;
-   add one for integer division truncation;
-   add one more for a minus sign if file timestamps can be negative;
-   add 4 to allow for any 4-digit epoch year (e.g. 1970);
-   add 25 to allow for "-MM-DD HH:MM:SS.NNNNNNNNN".  */
-#define FLOOR_LOG2_SECONDS_PER_YEAR 24
-#define FILE_TIMESTAMP_PRINT_LEN_BOUND \
-  (((sizeof (FILE_TIMESTAMP) * CHAR_BIT - 1 - FLOOR_LOG2_SECONDS_PER_YEAR) \
-    * 302 / 1000) \
-   + 1 + 1 + 4 + 25)
-
-extern FILE_TIMESTAMP file_timestamp_cons PARAMS ((char const *,
-						   time_t, int));
-extern FILE_TIMESTAMP file_timestamp_now PARAMS ((void));
-extern void file_timestamp_sprintf PARAMS ((char *p, FILE_TIMESTAMP ts));
-
-/* Return the mtime of file F (a struct file *), caching it.
-   The value is NONEXISTENT_MTIME if the file does not exist.  */
-#define file_mtime(f) file_mtime_1 ((f), 1)
-/* Return the mtime of file F (a struct file *), caching it.
-   Don't search using vpath for the file--if it doesn't actually exist,
-   we don't find it.
-   The value is NONEXISTENT_MTIME if the file does not exist.  */
-#define file_mtime_no_search(f) file_mtime_1 ((f), 0)
-extern FILE_TIMESTAMP f_mtime PARAMS ((struct file *file, int search));
-#define file_mtime_1(f, v) \
-  ((f)->last_mtime == UNKNOWN_MTIME ? f_mtime ((f), v) : (f)->last_mtime)
-
-/* Special timestamp values.  */
-
-/* The file's timestamp is not yet known.  */
-#define UNKNOWN_MTIME 0
-
-/* The file does not exist.  */
-#define NONEXISTENT_MTIME 1
-
-/* The file does not exist, and we assume that it is older than any
-   actual file.  */
-#define OLD_MTIME 2
-
-/* The smallest and largest ordinary timestamps.  */
-#define ORDINARY_MTIME_MIN (OLD_MTIME + 1)
-#define ORDINARY_MTIME_MAX ((FILE_TIMESTAMP_S (NEW_MTIME) \
-			     << FILE_TIMESTAMP_LO_BITS) \
-			    + ORDINARY_MTIME_MIN + FILE_TIMESTAMPS_PER_S - 1)
-
-/* Modtime value to use for `infinitely new'.  We used to get the current time
-   from the system and use that whenever we wanted `new'.  But that causes
-   trouble when the machine running make and the machine holding a file have
-   different ideas about what time it is; and can also lose for `force'
-   targets, which need to be considered newer than anything that depends on
-   them, even if said dependents' modtimes are in the future.  */
-#define NEW_MTIME INTEGER_TYPE_MAXIMUM (FILE_TIMESTAMP)
-
-#define check_renamed(file) \
-  while ((file)->renamed != 0) (file) = (file)->renamed /* No ; here.  */