Isolate just Rangan's changes.

git-svn-id: svn://10.0.0.236/branches/nss_dead_branch@123596 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/security/nss/lib/nss/nss.def

@@ -0,0 +1,689 @@
+;+#
+;+# The contents of this file are subject to the Mozilla Public
+;+# License Version 1.1 (the "License"); you may not use this file
+;+# except in compliance with the License. You may obtain a copy of
+;+# the License at http://www.mozilla.org/MPL/
+;+#
+;+# Software distributed under the License is distributed on an "AS
+;+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+;+# implied. See the License for the specific language governing
+;+# rights and limitations under the License.
+;+#
+;+# The Original Code is the Netscape security libraries.
+;+#
+;+# The Initial Developer of the Original Code is Netscape
+;+# Communications Corporation.  Portions created by Netscape are
+;+# Copyright (C) 2000 Netscape Communications Corporation.  All
+;+# Rights Reserved.
+;+#
+;+# Contributor(s): 
+;+#	Dr Stephen Henson <stephen.henson@gemplus.com>
+;+#
+;+# Alternatively, the contents of this file may be used under the
+;+# terms of the GNU General Public License Version 2 or later (the
+;+# "GPL"), in which case the provisions of the GPL are applicable
+;+# instead of those above.  If you wish to allow use of your
+;+# version of this file only under the terms of the GPL and not to
+;+# allow others to use your version of this file under the MPL,
+;+# indicate your decision by deleting the provisions above and
+;+# replace them with the notice and other provisions required by
+;+# the GPL.  If you do not delete the provisions above, a recipient
+;+# may use your version of this file under either the MPL or the
+;+# GPL.
+;+#
+;+#
+;+# OK, this file is meant to support SUN, LINUX, AIX and WINDOWS
+;+#   1. For all unix platforms, the string ";-"  means "remove this line"
+;+#   2. For all unix platforms, the string " DATA " will be removed from any 
+;+#	line on which it occurs.
+;+#   3. Lines containing ";+" will have ";+" removed on SUN and LINUX.
+;+#      On AIX, lines containing ";+" will be removed.  
+;+#   4. For all unix platforms, the string ";;" will thave the ";;" removed.
+;+#   5. For all unix platforms, after the above processing has taken place,
+;+#    all characters after the first ";" on the line will be removed.  
+;+#    And for AIX, the first ";" will also be removed.
+;+#  This file is passed directly to windows. Since ';' is a comment, all UNIX
+;+#   directives are hidden behind ";", ";+", and ";-"
+;+NSS_3.2 {       # NSS 3.2 release
+;+    global:
+LIBRARY nss3	;-
+EXPORTS		;-
+ATOB_AsciiToData;
+BTOA_ConvertItemToAscii;
+BTOA_DataToAscii;
+CERT_AsciiToName;
+CERT_CertTimesValid;
+CERT_CheckCertValidTimes;
+CERT_CreateCertificateRequest;
+CERT_ChangeCertTrust;
+CERT_DecodeDERCrl;
+CERT_DestroyCertificateRequest;
+CERT_DestroyCertList;
+CERT_DestroyName;
+CERT_EnableOCSPChecking;
+CERT_FormatName;
+CERT_DestroyCertificate;
+CERT_DupCertificate;
+CERT_FreeDistNames;
+CERT_FreeNicknames;
+CERT_GetAVATag;
+CERT_GetCertEmailAddress;
+CERT_GetCertNicknames;
+CERT_GetCertIssuerAndSN;
+CERT_GetCertTrust;
+CERT_GetCertUid;
+CERT_GetCommonName;
+CERT_GetCountryName;
+CERT_GetDBContentVersion;
+CERT_GetDefaultCertDB;
+CERT_GetDomainComponentName;
+CERT_GetLocalityName;
+CERT_GetOrgName;
+CERT_GetOrgUnitName;
+CERT_GetSSLCACerts;
+CERT_GetSlopTime;
+CERT_GetStateName;
+CERT_ImportCAChain;
+CERT_NameToAscii;
+CERT_RFC1485_EscapeAndQuote;
+CERT_SetSlopTime;
+CERT_VerifyCertName;
+CERT_VerifyCertNow;
+DER_UTCDayToAscii;
+DER_UTCTimeToAscii;
+DER_GeneralizedTimeToTime;
+NSS_Init;
+NSS_Initialize;
+NSS_InitReadWrite;
+NSS_NoDB_Init;
+NSS_Shutdown;
+NSS_VersionCheck;
+PK11_Authenticate;
+PK11_ChangePW;
+PK11_CheckUserPassword;
+PK11_CipherOp;
+PK11_CloneContext;
+PK11_ConfigurePKCS11;
+PK11_CreateContextBySymKey;
+PK11_CreateDigestContext;
+PK11_DestroyContext;
+PK11_DestroyTokenObject;
+PK11_DigestBegin;
+PK11_DigestOp;
+PK11_DigestFinal;
+PK11_DoesMechanism;
+PK11_FindCertFromNickname;
+PK11_FindCertFromDERCert;
+PK11_FindCertByIssuerAndSN;
+PK11_FindKeyByAnyCert;
+PK11_FindKeyByDERCert;
+PK11_FindSlotByName;
+PK11_Finalize;
+PK11_FortezzaHasKEA;
+PK11_FreeSlot;
+PK11_FreeSlotList;
+PK11_FreeSymKey;
+PK11_GenerateKeyPair;
+PK11_GenerateRandom;
+PK11_GenerateNewParam;
+PK11_GetAllTokens;
+PK11_GetBlockSize;
+PK11_GetFirstSafe;
+PK11_GetInternalKeySlot;
+PK11_GetInternalSlot;
+PK11_GetSlotName;
+PK11_GetTokenName;
+PK11_HashBuf;
+PK11_IsFIPS;
+PK11_IsFriendly;
+PK11_IsInternal;
+PK11_IsHW;
+PK11_IsPresent;
+PK11_IsReadOnly;
+PK11_KeyGen;
+PK11_ListCerts;
+PK11_NeedLogin;
+PK11_RandomUpdate;
+PK11_SetPasswordFunc;
+PK11_SetSlotPWValues;
+PORT_Alloc;
+PORT_Free;
+PORT_GetError;
+PORT_SetError;
+PORT_SetUCS4_UTF8ConversionFunction;
+PORT_SetUCS2_UTF8ConversionFunction;
+PORT_SetUCS2_ASCIIConversionFunction;
+SECITEM_CopyItem;
+SECITEM_DupItem;
+SECITEM_FreeItem;
+SECITEM_ZfreeItem;
+SECKEY_ConvertToPublicKey;
+SECKEY_CopyPrivateKey;
+SECKEY_CreateSubjectPublicKeyInfo;
+SECKEY_DestroyPrivateKey;
+SECKEY_DestroySubjectPublicKeyInfo;
+SECMOD_IsModulePresent;
+SECOID_FindOIDTagDescription;
+SECOID_GetAlgorithmTag;
+SEC_DeletePermCertificate;
+SEC_DeletePermCRL;
+SEC_DerSignData;
+SEC_DestroyCrl;
+SEC_FindCrlByDERCert;
+SEC_FindCrlByName;
+SEC_LookupCrls;
+SEC_NewCrl;
+;+#
+;+# The following symbols are exported only to make libssl3.so work. 
+;+# These are still private!!!
+;+#
+__CERT_NewTempCertificate;
+__PK11_CreateContextByRawKey;
+__PK11_GetKeyData;
+__nss_InitLock;
+CERT_CertChainFromCert;
+CERT_DestroyCertificateList;
+CERT_DupCertList;
+CERT_ExtractPublicKey;
+CERT_FindCertByName;
+DER_Lengths;
+DSAU_DecodeDerSig;
+DSAU_EncodeDerSig;
+HASH_GetHashObject;
+NSSRWLock_Destroy;
+NSSRWLock_HaveWriteLock;
+NSSRWLock_LockRead;
+NSSRWLock_LockWrite;
+NSSRWLock_New;
+NSSRWLock_UnlockRead;
+NSSRWLock_UnlockWrite;
+NSS_PutEnv;
+PK11_Derive;
+PK11_DeriveWithFlags;
+PK11_DigestKey;
+PK11_FindBestKEAMatch;
+PK11_FindFixedKey;
+PK11_GenerateFortezzaIV;
+PK11_GetBestKeyLength;
+PK11_GetBestSlot;
+PK11_GetBestSlotMultiple;
+PK11_GetBestWrapMechanism;
+PK11_GetCurrentWrapIndex;
+PK11_GetMechanism;
+PK11_GetModuleID;
+PK11_GetPrivateModulusLen;
+PK11_GetSlotFromKey;
+PK11_GetSlotFromPrivateKey;
+PK11_GetSlotID;
+PK11_GetSlotSeries;
+PK11_GetTokenInfo;
+PK11_GetWindow;
+PK11_GetWrapKey;
+PK11_IVFromParam;
+PK11_MakeKEAPubKey;
+PK11_ParamFromIV;
+PK11_PubDecryptRaw;
+PK11_PubDerive;
+PK11_PubEncryptRaw;
+PK11_PubUnwrapSymKey;
+PK11_PubWrapSymKey;
+PK11_ReferenceSymKey;
+PK11_RestoreContext;
+PK11_SaveContext;
+PK11_SetFortezzaHack;
+PK11_SetWrapKey;
+PK11_Sign;
+PK11_SignatureLen;
+PK11_SymKeyFromHandle;
+PK11_TokenExists;
+PK11_UnwrapSymKey;
+PK11_UnwrapSymKeyWithFlags;
+PK11_Verify;
+PK11_VerifyKeyOK;
+PK11_WrapSymKey;
+PORT_ArenaAlloc;
+PORT_ArenaZAlloc;
+PORT_FreeArena;
+PORT_NewArena;
+PORT_Realloc;
+PORT_ZAlloc;
+PORT_ZFree;
+RSA_FormatBlock;
+SECITEM_CompareItem;
+SECKEY_CreateRSAPrivateKey;
+SECKEY_DestroyPublicKey;
+SECKEY_PublicKeyStrength;
+SECKEY_UpdateCertPQG;
+SECMOD_LookupSlot;
+SGN_Begin;
+SGN_DestroyContext;
+SGN_End;
+SGN_NewContext;
+SGN_Update;
+VFY_Begin;
+VFY_CreateContext;
+VFY_DestroyContext;
+VFY_End;
+VFY_Update;
+;+#
+;+# The following symbols are exported only to make libsmime3.so work. 
+;+# These are still private!!!
+;+#
+__CERT_ClosePermCertDB;
+__CERT_DecodeDERCertificate;
+__CERT_TraversePermCertsForNickname;
+__CERT_TraversePermCertsForSubject;
+__PBE_CreateContext;
+__PBE_DestroyContext;
+__PBE_GenerateBits;
+ATOB_ConvertAsciiToItem;
+CERT_AddCertToListTail;
+CERT_CertListFromCert;
+CERT_DestroyCertArray;
+CERT_FindCertByDERCert;
+CERT_FindCertByIssuerAndSN;
+CERT_FindSMimeProfile;
+CERT_ImportCerts;
+CERT_NewCertList;
+CERT_OpenCertDBFilename;
+CERT_SaveSMimeProfile;
+CERT_VerifyCert;
+DER_GetInteger;
+DER_TimeToUTCTime;
+DER_UTCTimeToTime;
+PK11_AlgtagToMechanism;
+PK11_BlockData;
+PK11_CreatePBEAlgorithmID;
+PK11_DestroyObject;
+PK11_ExportEncryptedPrivateKeyInfo;
+PK11_ExportPrivateKeyInfo;
+PK11_FindCertAndKeyByRecipientList;
+PK11_FindCertAndKeyByRecipientListNew;
+PK11_FindCertInSlot;
+PK11_FindPrivateKeyFromCert;
+PK11_FortezzaMapSig;
+PK11_GetKeyLength;
+PK11_GetKeyStrength;
+PK11_ImportCertForKeyToSlot;
+PK11_ImportEncryptedPrivateKeyInfo;
+PK11_ImportPrivateKeyInfo;
+PK11_MapPBEMechanismToCryptoMechanism;
+PK11_PBEKeyGen;
+PK11_ParamFromAlgid;
+PK11_ParamToAlgid;
+PK11_TraverseCertsForNicknameInSlot;
+PK11_TraverseCertsForSubjectInSlot;
+PORT_ArenaGrow;
+PORT_ArenaMark;
+PORT_ArenaRelease;
+PORT_ArenaStrdup;
+PORT_ArenaUnmark;
+PORT_UCS2_ASCIIConversion;
+PORT_UCS2_UTF8Conversion;
+SECITEM_AllocItem;
+SECKEY_CopyEncryptedPrivateKeyInfo;
+SECKEY_CopyPrivateKeyInfo;
+SECKEY_DestroyEncryptedPrivateKeyInfo;
+SECKEY_DestroyPrivateKeyInfo;
+SECOID_CompareAlgorithmID;
+SECOID_CopyAlgorithmID;
+SECOID_DestroyAlgorithmID;
+SECOID_FindOID;
+SECOID_FindOIDByTag;
+SECOID_FindOIDTag;
+SECOID_SetAlgorithmID;
+SEC_ASN1DecodeInteger;
+SEC_ASN1DecodeItem;
+SEC_ASN1DecoderClearFilterProc;
+SEC_ASN1DecoderClearNotifyProc;
+SEC_ASN1DecoderFinish;
+SEC_ASN1DecoderSetFilterProc;
+SEC_ASN1DecoderSetNotifyProc;
+SEC_ASN1DecoderStart;
+SEC_ASN1DecoderUpdate;
+SEC_ASN1Encode;
+SEC_ASN1EncodeInteger;
+SEC_ASN1EncodeItem;
+SEC_ASN1EncoderClearNotifyProc;
+SEC_ASN1EncoderClearStreaming;
+SEC_ASN1EncoderClearTakeFromBuf;
+SEC_ASN1EncoderFinish;
+SEC_ASN1EncoderSetNotifyProc;
+SEC_ASN1EncoderSetStreaming;
+SEC_ASN1EncoderSetTakeFromBuf;
+SEC_ASN1EncoderStart;
+SEC_ASN1EncoderUpdate;
+SEC_ASN1LengthLength;
+SEC_PKCS5GetCryptoAlgorithm;
+SEC_PKCS5GetKeyLength;
+SEC_PKCS5GetPBEAlgorithm;
+SEC_PKCS5IsAlgorithmPBEAlg;
+SEC_SignData;
+SGN_CompareDigestInfo;
+SGN_CopyDigestInfo;
+SGN_CreateDigestInfo;
+SGN_DestroyDigestInfo;
+SGN_Digest;
+VFY_VerifyData;
+VFY_VerifyDigest;
+;+#
+;+# Data objects
+;+#
+;+# Don't export these DATA symbols on Windows because they don't work right.
+;;CERT_CrlTemplate DATA ;
+;;CERT_SignedDataTemplate DATA ;
+;;CERT_CertificateTemplate DATA ;
+;;CERT_CertificateRequestTemplate DATA ;
+;;CERT_IssuerAndSNTemplate DATA ;
+;;CERT_SetOfSignedCrlTemplate DATA ;
+;;SECKEY_DSAPublicKeyTemplate DATA ;
+;;SECKEY_EncryptedPrivateKeyInfoTemplate DATA ;
+;;SECKEY_PointerToEncryptedPrivateKeyInfoTemplate DATA ;
+;;SECKEY_PointerToPrivateKeyInfoTemplate DATA ;
+;;SECKEY_PrivateKeyInfoTemplate DATA ;
+;;SECKEY_RSAPublicKeyTemplate DATA ;
+;;SECOID_AlgorithmIDTemplate DATA ;
+;;SEC_AnyTemplate DATA ;
+;;SEC_BMPStringTemplate DATA ;
+;;SEC_BitStringTemplate DATA ;
+;;SEC_GeneralizedTimeTemplate DATA ;
+;;SEC_IA5StringTemplate DATA ;
+;;SEC_IntegerTemplate DATA ;
+;;SEC_ObjectIDTemplate DATA ;
+;;SEC_OctetStringTemplate DATA ;
+;;SEC_PointerToAnyTemplate DATA ;
+;;SEC_PointerToOctetStringTemplate DATA ;
+;;SEC_SetOfAnyTemplate DATA ;
+;;SEC_UTCTimeTemplate DATA ;
+;;sgn_DigestInfoTemplate DATA ;
+NSS_Get_CERT_CrlTemplate;
+NSS_Get_CERT_SignedDataTemplate;
+NSS_Get_CERT_CertificateTemplate;
+NSS_Get_CERT_CertificateRequestTemplate;
+NSS_Get_CERT_IssuerAndSNTemplate;
+NSS_Get_CERT_SetOfSignedCrlTemplate;
+NSS_Get_SECKEY_DSAPublicKeyTemplate;
+NSS_Get_SECKEY_EncryptedPrivateKeyInfoTemplate;
+NSS_Get_SECKEY_PointerToEncryptedPrivateKeyInfoTemplate;
+NSS_Get_SECKEY_PointerToPrivateKeyInfoTemplate;
+NSS_Get_SECKEY_PrivateKeyInfoTemplate;
+NSS_Get_SECKEY_RSAPublicKeyTemplate;
+NSS_Get_SECOID_AlgorithmIDTemplate;
+NSS_Get_SEC_AnyTemplate;
+NSS_Get_SEC_BMPStringTemplate;
+NSS_Get_SEC_BitStringTemplate;
+NSS_Get_SEC_GeneralizedTimeTemplate;
+NSS_Get_SEC_IA5StringTemplate;
+NSS_Get_SEC_IntegerTemplate;
+NSS_Get_SEC_ObjectIDTemplate;
+NSS_Get_SEC_OctetStringTemplate;
+NSS_Get_SEC_PointerToAnyTemplate;
+NSS_Get_SEC_PointerToOctetStringTemplate;
+NSS_Get_SEC_SetOfAnyTemplate;
+NSS_Get_SEC_UTCTimeTemplate;
+NSS_Get_sgn_DigestInfoTemplate;
+;+# commands
+CERT_DecodeBasicConstraintValue;
+CERT_DecodeOidSequence;
+CERT_DecodeUserNotice;
+CERT_DecodeCertificatePoliciesExtension;
+CERT_DestroyCertificatePoliciesExtension;
+CERT_FindCertByNicknameOrEmailAddr;
+CERT_FindCertByNickname;
+CERT_GenTime2FormattedAscii;
+CERT_Hexify;
+CERT_CompareName;
+PK11SDR_Encrypt;
+PK11SDR_Decrypt;
+NSSBase64Decoder_Create;
+NSSBase64Decoder_Destroy;
+NSSBase64Decoder_Update;
+NSSBase64Encoder_Create;
+NSSBase64Encoder_Destroy;
+NSSBase64Encoder_Update;
+;+#PK11_DoPassword;
+;+#PK11_FindKeyByKeyID;
+PK11_InitPin;
+PK11_NeedUserInit;
+;+    local:
+;+       *;
+;+};
+;+NSS_3.2.1 {       # NSS 3.2.1 release
+;+    global:
+CERT_AddRDN;
+CERT_CreateRDN;
+CERT_CreateAVA;
+CERT_CreateName;
+;+    local:
+;+       *;
+;+};
+;+NSS_3.3 { 	# NSS 3.3. release
+;+    global:
+CERT_CheckCertUsage;
+CERT_FindCertIssuer;
+PK11_GetModule;
+SECKEY_CreateDHPrivateKey;
+SECKEY_GetPublicKeyType;
+SECMOD_AddNewModule;
+;+#
+;+# The following symbols are exported only to make JSS work.
+;+# These are still private!!!
+;+#
+CERT_DisableOCSPChecking;
+CERT_DisableOCSPDefaultResponder;
+CERT_EnableOCSPDefaultResponder;
+CERT_GetCertTimes;
+CERT_ImportCAChainTrusted;
+CERT_ImportCRL;
+CERT_IsCACert;
+CERT_IsCADERCert;
+CERT_SetOCSPDefaultResponder;
+PBE_CreateContext;
+PBE_DestroyContext;
+PBE_GenerateBits;
+PK11_CheckSSOPassword;
+PK11_CopySymKeyForSigning;
+PK11_DeleteTokenCertAndKey;
+PK11_DEREncodePublicKey;
+PK11_ExtractKeyValue;
+PK11_FindCertsFromNickname;
+PK11_FindKeyByKeyID;
+PK11_GetIVLength;
+PK11_GetKeyData;
+PK11_GetKeyType;
+PK11_GetLowLevelKeyIDForCert;
+PK11_GetLowLevelKeyIDForPrivateKey;
+PK11_GetSlotPWValues;
+PK11_ImportCertForKey;
+PK11_ImportDERCertForKey;
+PK11_ImportDERPrivateKeyInfo;
+PK11_ImportSymKey;
+PK11_IsLoggedIn;
+PK11_KeyForDERCertExists;
+PK11_KeyForCertExists;
+PK11_ListPrivateKeysInSlot;
+PK11_ListCertsInSlot;
+PK11_Logout;
+PK11_NeedPWInit;
+PK11_MakeIDFromPubKey;
+PK11_PQG_DestroyParams;
+PK11_PQG_DestroyVerify;
+PK11_PQG_GetBaseFromParams;
+PK11_PQG_GetCounterFromVerify;
+PK11_PQG_GetHFromVerify;
+PK11_PQG_GetPrimeFromParams;
+PK11_PQG_GetSeedFromVerify;
+PK11_PQG_GetSubPrimeFromParams;
+PK11_PQG_NewParams;
+PK11_PQG_NewVerify;
+PK11_PQG_ParamGen;
+PK11_PQG_ParamGenSeedLen;
+PK11_PQG_VerifyParams;
+PK11_ReferenceSlot;
+PK11_SeedRandom;
+PK11_UnwrapPrivKey;
+PK11_VerifyRecover;
+PK11_WrapPrivKey;
+SEC_CertNicknameConflict;
+SEC_PKCS5GetIV;
+SECMOD_DeleteInternalModule;
+SECMOD_DestroyModule;
+SECMOD_GetDefaultModuleList;
+SECMOD_GetDefaultModuleListLock;
+SECMOD_GetInternalModule;
+SECMOD_GetReadLock;
+SECMOD_ReferenceModule;
+SECMOD_ReleaseReadLock;
+SECKEY_AddPrivateKeyToListTail;
+SECKEY_EncodeDERSubjectPublicKeyInfo;
+SECKEY_ExtractPublicKey;
+SECKEY_DestroyPrivateKeyList;
+SECKEY_GetPrivateKeyType;
+SECKEY_HashPassword;
+SECKEY_ImportDERPublicKey;
+SECKEY_NewPrivateKeyList;
+SECKEY_RemovePrivateKeyListNode;
+VFY_EndWithSignature;
+;+    local:
+;+       *;
+;+};
+;+NSS_3.3.1 { 	# NSS 3.3.1 release
+;+    global:
+;+#
+;+# The following symbols are exported only to make libsmime3.so work. 
+;+# These are still private!!!
+;+#
+PK11_CreatePBEParams;
+PK11_DestroyPBEParams;
+;+    local:
+;+       *;
+;+};
+;+NSS_3.4 { 	# NSS 3.4 release
+;+    global:
+SECMOD_AddNewModuleEx;
+SECMOD_DeleteModule;
+SECMOD_FreeModuleSpecList;
+SECMOD_GetModuleSpecList;
+SECMOD_LoadModule;
+SECMOD_LoadUserModule;
+SECMOD_UnloadUserModule;
+SECMOD_UpdateModule;
+;+# for PKCS #12
+PK11_RawPBEKeyGen;
+;+# for PSM
+__CERT_AddTempCertToPerm;
+CERT_AddOKDomainName;
+CERT_CopyName;
+CERT_CreateSubjectCertList;
+CERT_DecodeAVAValue;
+;+#CERT_DecodeCertFromPackage;
+CERT_DecodeGeneralName;
+CERT_DecodeTrustString;
+CERT_DerNameToAscii;
+CERT_EncodeGeneralName;
+CERT_FilterCertListByCANames;
+CERT_FilterCertListByUsage;
+CERT_FindCertExtension;
+CERT_FindKeyUsageExtension;
+CERT_FindUserCertByUsage;
+CERT_FindUserCertsByUsage;
+CERT_GetCertChainFromCert;
+CERT_GetOCSPAuthorityInfoAccessLocation;
+CERT_KeyFromDERCrl;
+CERT_MakeCANickname;
+CERT_NicknameStringsFromCertList;
+CERT_VerifySignedData;
+DER_Encode;
+HASH_Begin;
+HASH_Create;
+HASH_Destroy;
+HASH_End;
+HASH_ResultLen;
+HASH_Update;
+NSSBase64_DecodeBuffer;   # from Stan
+NSSBase64_EncodeItem;   # from Stan
+PK11_GetKeyGen;
+PK11_GetMinimumPwdLength;
+PK11_GetNextSafe;
+PK11_GetPadMechanism;
+PK11_GetSlotInfo;
+PK11_HasRootCerts;
+PK11_IsDisabled;
+PK11_LoadPrivKey;
+PK11_LogoutAll;
+PK11_MechanismToAlgtag;
+PK11_ResetToken;
+PK11_TraverseSlotCerts;
+SEC_ASN1Decode;
+SECKEY_CopySubjectPublicKeyInfo;
+SECMOD_CreateModule;
+SECMOD_FindModule;
+SECMOD_FindSlot;
+SECMOD_PubCipherFlagstoInternal;
+SECMOD_PubMechFlagstoInternal;
+;;CERT_NameTemplate DATA ;
+;;CERT_SubjectPublicKeyInfoTemplate DATA ;
+;;SEC_BooleanTemplate DATA ;
+;;SEC_NullTemplate DATA ;
+;;SEC_SignedCertificateTemplate DATA ;
+;;SEC_UTF8StringTemplate DATA ;
+NSS_Get_CERT_NameTemplate;
+NSS_Get_CERT_SubjectPublicKeyInfoTemplate;
+NSS_Get_SEC_BooleanTemplate;
+NSS_Get_SEC_NullTemplate;
+NSS_Get_SEC_SignedCertificateTemplate;
+NSS_Get_SEC_UTF8StringTemplate;
+;+# for JSS
+PK11_DeleteTokenPrivateKey;
+PK11_DeleteTokenPublicKey;
+PK11_DeleteTokenSymKey;
+PK11_GetNextSymKey;
+PK11_GetPQGParamsFromPrivateKey;
+PK11_GetPrivateKeyNickname;
+PK11_GetPublicKeyNickname;
+PK11_GetSymKeyNickname;
+PK11_ImportDERPrivateKeyInfoAndReturnKey;
+PK11_ImportPrivateKeyInfoAndReturnKey;
+PK11_ImportPublicKey;
+PK11_ImportSymKeyWithFlags;
+PK11_ListFixedKeysInSlot;
+PK11_ListPrivKeysInSlot;
+PK11_ListPublicKeysInSlot;
+PK11_ProtectedAuthenticationPath;
+PK11_SetPrivateKeyNickname;
+PK11_SetPublicKeyNickname;
+PK11_SetSymKeyNickname;
+SECKEY_DecodeDERSubjectPublicKeyInfo;
+SECKEY_DestroyPublicKeyList;
+;+# for debugging
+nss_DumpCertificateCacheInfo;
+;+    local:
+;+       *;
+;+};
+;+NSS_3.5 { 	# cert creation APIs used by certutil
+;+    global:
+CERT_AddExtension;
+CERT_CopyRDN;
+CERT_CreateCertificate;
+CERT_CreateValidity;
+CERT_DestroyValidity;
+CERT_EncodeAndAddBitStrExtension;
+CERT_EncodeAuthKeyID;
+CERT_EncodeBasicConstraintValue;
+CERT_EncodeCRLDistributionPoints;
+CERT_FinishExtensions;
+CERT_StartCertExtensions;
+DER_AsciiToTime;
+PK11_ImportCert;
+PORT_Strdup;
+SECMOD_CanDeleteInternalModule;
+;+    local:
+;+       *;
+;+};
+;+NSS_3.6 { 	# cert creation APIs used by certutil
+;+    global:
+PK11_GetPBEIV;
+CERT_VerifyCertChain;
+;+    local:
+;+       *;
+;+};

mozilla/tools/tinderbox-configs/firefox/win32/CLOBBER

@@ -1 +0,0 @@
-Another clobber to see about the orange... :(

mozilla/tools/tinderbox-configs/firefox/win32/mozconfig

@@ -1,26 +0,0 @@
-#
-## hostname: gaius
-## uname: WINNT GAIUS 5.2 3790 xx I386
-#
-
-
-# . $topsrcdir/browser/config/mozconfig
-
-mk_add_options MOZ_CO_PROJECT=browser
-##mk_add_options MOZ_MAKE_FLAGS="-j8"
-#mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
-mk_add_options MOZ_PACKAGE_NSIS=1
-
-ac_add_options --enable-application=browser
-ac_add_options --enable-update-channel=nightly
-ac_add_options --enable-optimize
-ac_add_options --disable-debug
-# ac_add_options --enable-codesighs
-ac_add_options --enable-tests
-ac_add_options --disable-static
-# ac_add_options --disable-shared
-# ac_add_options --enable-official-branding
-ac_add_options --enable-svg
-ac_add_options --enable-canvas
-ac_add_options --enable-default-toolkit=cairo-windows
-#ac_add_options --enable-update-packaging

mozilla/tools/tinderbox-configs/firefox/win32/tinder-config.pl

@@ -1,254 +0,0 @@
-#
-## hostname: gaius
-## uname: WINNT GAIUS 5.2 3790 xx I386
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{MOZ_INSTALLER_USE_7ZIP} = '1';
-$ENV{NO_EM_RESTART} = '1';
-$ENV{MOZ_PACKAGE_NSIS} = '1';
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-$BuildXForms = 1;
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "Firefox";
-$VendorName               = "Mozilla";
-
-$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
-$RegxpcomTest             = 0;
-$AliveTest                = 0;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-$LayoutPerformanceTest    = 0;  # Tp
-#$DHTMLPerformanceTest     = 0;  # Tdhtml
-#$QATest                   = 0;  
-$XULWindowOpenTest        = 0;  # Txul
-#$StartupPerformanceTest   = 1;  # Ts
-#$NeckoUnitTest            = 0;
-$RenderPerformanceTest     = 0;  # Tgfx
-
-$RunUnitTests = 1;
-
-$TestsPhoneHome           = 1;  # Should test report back to server?
-$GraphNameOverride        = 'fxexp-win32-tbox';
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-$pageload_server          = "pageload.build.mozilla.org";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 30;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-$LayoutPerformanceTestTimeout     = 800;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 20;    # seconds
-#$XULWindowOpenTestTimeout	      = 90;   # seconds
-#$NeckoUnitTestTimeout             = 30;    # seconds
-$RenderPerformanceTestTimeout     = 1800;  # seconds
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-$Make          = 'make';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-$blat           = 'd:/moztools/bin/blat.exe';
-$use_blat       = 1;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-#$moz_cvsroot   = $ENV{CVSROOT};
-$moz_cvsroot = ':ext:cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-#$ObjDir = 'fx-trunk-cairo';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Unit Testing';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-#$BuildTree  = 'MozillaTest';
-#$BuildTree  = 'Firefox-Cairo';
-$BuildTree  = 'MozillaExperimental';
-
-#$BuildName = '';
-#$BuildTag = '';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'firefox.exe';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 0;
-$shiptalkback  = 0;
-$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
-$ReleaseToDated = 0; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = "4";
-$package_creation_path = "/browser/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-#$ssh_user      = "cltbld";
-#$ssh_server    = "stage.mozilla.org";
-$ftp_path      = "/home/ftp/pub/firefox/nightly";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly";
-$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
-$milestone     = "trunk";
-$notify_list   = 'build-announce@mozilla.org';
-#$stub_installer = 0;
-#$sea_installer = 1;
-#$archive       = 1;
-#$push_raw_xpis = 1;
-#$update_package = 1;
-#$update_product = "Firefox";
-#$update_version = "trunk";
-#$update_platform = "WINNT_x86-msvc";
-#$update_hash = "sha1";
-#$update_filehost = "ftp.mozilla.org";
-#$update_appv = "3.0a1";
-#$update_extv = "3.0a1";
-#$update_pushinfo = 0;
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';
-
-# Build XForms
-$BuildXForms = 1;