- adding GTK1 configs to public CVS

git-svn-id: svn://10.0.0.236/branches/GTK1@214827 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/security/nss/lib/softoken/sftkdbti.h

@@ -1,88 +0,0 @@
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is the Netscape security libraries.
- *
- * The Initial Developer of the Original Code is
- * Red Hat Inc.
- * Portions created by the Initial Developer are Copyright (C) 2007
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-#ifndef SFTKDBTI_H
-#define SFTKDBTI_H 1
-
-/*
- * private defines
- */
-struct SFTKDBHandleStr {
-    SDB   *db;
-    PRInt32 ref;
-    CK_OBJECT_HANDLE  type;
-    SECItem passwordKey;
-    SECItem *newKey;
-    PZLock *passwordLock;
-    SFTKDBHandle *peerDB;
-    SDB   *update;
-};
-
-#define SFTK_KEYDB_TYPE 0x40000000
-#define SFTK_CERTDB_TYPE 0x00000000
-#define SFTK_OBJ_TYPE_MASK 0xc0000000
-#define SFTK_OBJ_ID_MASK (~SFTK_OBJ_TYPE_MASK)
-#define SFTK_TOKEN_TYPE 0x80000000
-
-/* the following is the number of id's to handle on the stack at a time,
- * it's not an upper limit of IDS that can be stored in the database */
-#define SFTK_MAX_IDS 10
-
-#define SFTK_GET_SDB(handle) \
-	((handle)->update ? (handle)->update : (handle)->db)
-
-SECStatus sftkdb_DecryptAttribute(SECItem *passKey, SECItem *cipherText,
-			SECItem **plainText);
-SECStatus sftkdb_EncryptAttribute(PLArenaPool *arena, SECItem *passKey,
-			SECItem *plainText, SECItem **cipherText);
-SECStatus sftkdb_SignAttribute(PLArenaPool *arena, SECItem *passKey,
-			CK_OBJECT_HANDLE objectID,
-			CK_ATTRIBUTE_TYPE attrType,
-			SECItem *plainText, SECItem **sigText);
-SECStatus sftkdb_VerifyAttribute(SECItem *passKey,
-			CK_OBJECT_HANDLE objectID,
-			CK_ATTRIBUTE_TYPE attrType,
-			SECItem *plainText, SECItem *sigText);
-
-void sftk_ULong2SDBULong(unsigned char *data, CK_ULONG value);
-CK_RV sftkdb_Update(SFTKDBHandle *handle, SECItem *key);
-CK_RV sftkdb_PutAttributeSignature(SFTKDBHandle *handle, 
-		SDB *keyTarget, CK_OBJECT_HANDLE objectID, 
-		CK_ATTRIBUTE_TYPE type, SECItem *signText);
-
-
-
-#endif

mozilla/tools/tinderbox-configs/firefox/linux/mozconfig

@@ -0,0 +1,25 @@
+# Commenting out sourcing browser/config/mozconfig in favor of add'l client.mk
+# features.
+# . $topsrcdir/browser/config/mozconfig
+
+mk_add_options MOZ_CO_PROJECT=browser
+mk_add_options MOZ_CO_MODULE="mozilla/tools/trace-malloc"
+
+ac_add_options --enable-application=browser
+# Yeah, I want this to be a debug build.
+ac_add_options --disable-optimize
+ac_add_options --enable-debug
+
+# I ought to do this, if this machine had the needed libraries...:
+# ac_add_options --enable-xft
+# ac_add_options --enable-default-toolkit=gtk2
+ac_add_options --enable-default-toolkit=gtk
+
+ac_add_options --enable-trace-malloc
+
+#ac_add_options --enable-places
+
+# Disable Cairo.
+ac_add_options --disable-canvas
+ac_add_options --disable-svg
+

mozilla/tools/tinderbox-configs/firefox/linux/tinder-config.pl

@@ -0,0 +1,176 @@
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$ENV{PATH} = "/usr/local/binutils-2.13.2.1/bin:/usr/local/gcc-3.4.3/bin:" . $ENV{PATH};
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+$BuildAdministrator = "dbaron\@dbaron.org";
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+#$BuildDepend       = 1;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName               = "Firefox";
+$VendorName                = "Mozilla";
+$ENV{NO_EM_RESTART}        = '1';
+$ENV{XPCOM_DEBUG_BREAK}    = 'abort';
+
+#$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
+#$RegxpcomTest             = 1;
+#$AliveTest                = 1;
+#$JavaTest                 = 0;
+#$ViewerTest               = 0;
+$BloatTest                = 1;  # warren memory bloat test
+$BloatTest2               = 1;  # dbaron memory bloat test, require tracemalloc
+#$DomToTextConversionTest  = 0;  
+#$XpcomGlueTest            = 0;
+#$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+#$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+#$MailBloatTest            = 0;
+#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+#$LayoutPerformanceTest    = 0;  # Tp
+#$QATest                   = 0;  
+#$XULWindowOpenTest        = 0;  # Txul
+#$StartupPerformanceTest   = 0;  # Ts
+
+$TestsPhoneHome           = 1;  # Should test report back to server?
+#$results_server           = "axolotl.mozilla.org"; # was tegu
+#$pageload_server          = "spider";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+
+#$CreateProfileTimeout             = 45;
+$RegxpcomTestTimeout              = 60;
+
+#$AliveTestTimeout                 = 45;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+$BloatTestTimeout                 = 240;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 60;    # seconds
+#$XULWindowOpenTestTimeout	      = 150;   # seconds
+
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+#$Make          = 'gmake';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+#$blat           = 'c:/nstools/bin/blat';
+#$use_blat       = 0;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+$moz_cvsroot   = ':ext:cltbld@cvs.mozilla.org:/cvsroot';
+#$moz_cvsroot   = ":pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot";
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+$ObjDir = 'obj';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'GTK1 (gcc 3.4)';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+$BuildTree  = 'Firefox';
+
+#$BuildName = '';
+#$BuildTag = '';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'firefox-bin';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# allow override of timezone value (for win32 POSIX::strftime)
+#$Timezone = '';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+$LogCompression = 'bzip2';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+$LogEncoding = 'uuencode';