Bug 391056 - "Swap to SQLite-based pageload server (take three)" [p=reed r=BuildTeam]

git-svn-id: svn://10.0.0.236/branches/feature_textframe@231635 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/security/nss/lib/softoken/sftkdbti.h

@@ -1,88 +0,0 @@
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is the Netscape security libraries.
- *
- * The Initial Developer of the Original Code is
- * Red Hat Inc.
- * Portions created by the Initial Developer are Copyright (C) 2007
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-#ifndef SFTKDBTI_H
-#define SFTKDBTI_H 1
-
-/*
- * private defines
- */
-struct SFTKDBHandleStr {
-    SDB   *db;
-    PRInt32 ref;
-    CK_OBJECT_HANDLE  type;
-    SECItem passwordKey;
-    SECItem *newKey;
-    PZLock *passwordLock;
-    SFTKDBHandle *peerDB;
-    SDB   *update;
-};
-
-#define SFTK_KEYDB_TYPE 0x40000000
-#define SFTK_CERTDB_TYPE 0x00000000
-#define SFTK_OBJ_TYPE_MASK 0xc0000000
-#define SFTK_OBJ_ID_MASK (~SFTK_OBJ_TYPE_MASK)
-#define SFTK_TOKEN_TYPE 0x80000000
-
-/* the following is the number of id's to handle on the stack at a time,
- * it's not an upper limit of IDS that can be stored in the database */
-#define SFTK_MAX_IDS 10
-
-#define SFTK_GET_SDB(handle) \
-	((handle)->update ? (handle)->update : (handle)->db)
-
-SECStatus sftkdb_DecryptAttribute(SECItem *passKey, SECItem *cipherText,
-			SECItem **plainText);
-SECStatus sftkdb_EncryptAttribute(PLArenaPool *arena, SECItem *passKey,
-			SECItem *plainText, SECItem **cipherText);
-SECStatus sftkdb_SignAttribute(PLArenaPool *arena, SECItem *passKey,
-			CK_OBJECT_HANDLE objectID,
-			CK_ATTRIBUTE_TYPE attrType,
-			SECItem *plainText, SECItem **sigText);
-SECStatus sftkdb_VerifyAttribute(SECItem *passKey,
-			CK_OBJECT_HANDLE objectID,
-			CK_ATTRIBUTE_TYPE attrType,
-			SECItem *plainText, SECItem *sigText);
-
-void sftk_ULong2SDBULong(unsigned char *data, CK_ULONG value);
-CK_RV sftkdb_Update(SFTKDBHandle *handle, SECItem *key);
-CK_RV sftkdb_PutAttributeSignature(SFTKDBHandle *handle, 
-		SDB *keyTarget, CK_OBJECT_HANDLE objectID, 
-		CK_ATTRIBUTE_TYPE type, SECItem *signText);
-
-
-
-#endif

mozilla/tools/tinderbox-configs/firefox/macosx/CLOBBER

@@ -0,0 +1,6 @@
+# List clobbering rationale in this file. Please include bug numbers whenever possible.
+- 20070619: and now libxul is back on again
+- 20070618: clobbering for bug 345517 (enable libxul), after it was backed out for Mac
+- 20070612: clobbering for bug 345517 (enable libxul). Again, after fixing mozconfig
+- 20070612: clobbering for bug 345517 (enable libxul)
+- 20070529: CLOBBER to get symbols uploaded for the first time

mozilla/tools/tinderbox-configs/firefox/macosx/mozconfig

@@ -0,0 +1,26 @@
+#
+## hostname: bm-xservex11.build.mozilla.org
+## uname: Darwin bm-xserve11.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
+#
+
+. $topsrcdir/build/macosx/universal/mozconfig
+
+mk_add_options MOZ_MAKE_FLAGS="-j4"
+mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging mozilla/tools/codesighs"
+mk_add_options MOZ_CO_PROJECT="browser"
+mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/../build/universal
+mk_add_options MOZ_MAKE_FLAGS="MOZ_ENABLE_NEW_TEXT_FRAME=1"
+
+ac_add_options --enable-application=browser
+ac_add_options --enable-update-channel=nightly
+ac_add_options --enable-optimize="-O2 -g"
+ac_add_options --disable-debug
+ac_add_options --disable-tests
+ac_add_options --enable-update-packaging
+
+# ac_add_options --enable-official-branding
+ac_add_app_options ppc --enable-prebinding
+ac_add_options --enable-svg
+ac_add_options --enable-canvas
+
+ac_add_options --enable-codesighs

mozilla/tools/tinderbox-configs/firefox/macosx/tinder-config.pl

@@ -0,0 +1,257 @@
+#
+## hostname: bm-xservex11.build.mozilla.org
+## uname: Darwin bm-xserve11.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$ENV{NO_EM_RESTART} = "1";
+$ENV{DYLD_NO_FIX_PREBINDING} = "1";
+$ENV{LD_PREBIND_ALLOW_OVERLAP} = "1";
+$ENV{CVS_RSH} = "ssh";
+
+$MacUniversalBinary = 1;
+
+# $ENV{MOZ_PACKAGE_MSI}
+#-----------------------------------------------------------------------------
+#  Default: 0
+#   Values: 0 | 1
+#  Purpose: Controls whether a MSI package is made.
+# Requires: Windows and a local MakeMSI installation.
+#$ENV{MOZ_PACKAGE_MSI} = 0;
+
+# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
+#-----------------------------------------------------------------------------
+#  Default: scp
+#   Values: scp | rsync
+#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
+# Requires: The selected type requires the command be available both locally
+#           and on the Talkback server.
+#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+$BuildAdministrator = 'build@mozilla.org';
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+#$BuildDepend       = 1;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+#$BuildLocales      = 0;      # Do l10n packaging?
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = 'Minefield';
+$VendorName               = "";
+
+$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
+$RegxpcomTest             = 1;
+$AliveTest                = 1;
+#$JavaTest                 = 0;
+#$ViewerTest               = 0;
+#$BloatTest                = 0;  # warren memory bloat test
+#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+#$DomToTextConversionTest  = 0;  
+#$XpcomGlueTest            = 0;
+$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+#$MailBloatTest            = 0;
+#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+$LayoutPerformanceTest    = 1;  # Tp
+$LayoutPerformanceLocalTest   = 0;  # Tp2
+$DHTMLPerformanceTest     = 1;  # Tdhtml
+#$QATest                   = 0;  
+$XULWindowOpenTest        = 1;  # Txul
+$StartupPerformanceTest   = 1;  # Ts
+
+$TestsPhoneHome           = 1;  # Should test report back to server?
+
+$GraphNameOverride        = 'xserve11.build.mozilla.org_TextFrame';
+
+# $results_server
+#----------------------------------------------------------------------------
+# Server on which test results will be accessible.  This was originally tegu,
+# then became axolotl.  Once we moved services from axolotl, it was time
+# to give this service its own hostname to make future transitions easier.
+# - cmp@mozilla.org
+#$results_server           = "build-graphs.mozilla.org";
+
+#$pageload_server          = "spider";  # localhost
+$pageload_server          = "pageload.build.mozilla.org";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 120;
+
+$AliveTestTimeout                 = 10;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
+#$LayoutPerformanceLocalTestTimeout     = 1200;  # entire test, seconds
+#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 15;    # seconds
+#$XULWindowOpenTestTimeout	      = 150;   # seconds
+
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+#$Make          = 'gmake';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+#$blat           = 'c:/nstools/bin/blat';
+#$use_blat       = 0;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+#$moz_cvsroot   = $ENV{CVSROOT};
+$moz_cvsroot   = ":ext:cltbld\@cvs.mozilla.org:/cvsroot";
+#$moz_cvsroot   = "/builds/cvs.hourly/cvsroot";
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+$ObjDir = '../build/universal';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'TextFrame';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+$BuildTree  = 'MozillaExperimental';
+
+#$BuildName = '';
+#$BuildTag = '';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'firefox-bin';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# Release build options
+$ReleaseBuild  = 1;
+$shiptalkback  = 0;
+#$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
+#$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
+$build_hour    = "4";
+$package_creation_path = "/browser/installer";
+# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
+$mac_bundle_path = "/browser/app";
+$ssh_version   = "2";
+#$ssh_user      = "cltbld";
+#$ssh_server    = "stage.mozilla.org";
+$ftp_path      = "/home/ftp/pub/firefox/nightly/experimental/textframe";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/experimental/textframe";
+$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
+$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
+$milestone     = "trunk";
+$notify_list   = "build-announce\@mozilla.org";
+$stub_installer = 0;
+$sea_installer = 0;
+$archive       = 1;
+#$push_raw_xpis = 1;
+$update_package = 1;
+$update_product = "Firefox";
+$update_version = "trunk";
+$update_platform = "Darwin_Universal-gcc3";
+$update_hash = "md5";
+$update_filehost = "ftp.mozilla.org";
+$update_ver_file = 'browser/config/version.txt';
+$update_pushinfo = 0;
+$crashreporter_buildsymbols = 0;
+$crashreporter_pushsymbols = 0;
+$ENV{SYMBOL_SERVER_HOST} = 'stage.mozilla.org';
+$ENV{SYMBOL_SERVER_USER}   = 'ffxbld';
+$ENV{SYMBOL_SERVER_PATH}   = '/mnt/netapp/breakpad/symbols_ffx/';
+$ENV{SYMBOL_SERVER_SSH_KEY}   = "$ENV{HOME}/.ssh/ffxbld_dsa";
+$ENV{MOZ_SYMBOLS_EXTRA_BUILDID} = 'textframe';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = '';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = '';
+
+# Prevent Extension Manager from spawning child processes during tests
+# - processes that tbox scripts cannot kill. 
+#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/firefox/win32/CLOBBER

@@ -0,0 +1,5 @@
+# List clobbering rationale in this file. Please include bug numbers whenever possible.
+- 2007/06/12: clobbering for bug 345517 (enable libxul). Again, after fixing mozconfig
+- 2007/06/12: clobbering for bug 345517 (enable libxul)
+- 2007/05/28: clobbering for bug 382141 to get symbols uploaded
+- 2007/05/22: clobbering a win32 trunk build to test aus2 migration (see http://wiki.mozilla.org/WeeklyUpdates/2007-05-21#Build and http://weblogs.mozillazine.org/preed/2007/05/aus2s_a_movin_can_you_help_us.html)

mozilla/tools/tinderbox-configs/firefox/win32/mozconfig

@@ -0,0 +1,24 @@
+#
+## hostname: fxexp-win32-tbox
+## uname: CYGWIN_NT-5.2 fx-win32-tbox 1.5.19(0.150/4/2) 2006-01-20 13:28 i686 Cygwin
+#
+
+# . $topsrcdir/browser/config/mozconfig
+
+mk_add_options MOZ_CO_PROJECT=browser
+mk_add_options MOZ_MAKE_FLAGS="-j5"
+mk_add_options MOZ_MAKE_FLAGS="MOZ_ENABLE_NEW_TEXT_FRAME=1"
+mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
+mk_add_options MOZ_PACKAGE_NSIS=1
+
+ac_add_options --enable-application=browser
+ac_add_options --enable-update-channel=nightly
+ac_add_options --enable-optimize
+ac_add_options --disable-debug
+# ac_add_options --enable-codesighs
+ac_add_options --disable-tests
+# ac_add_options --enable-official-branding
+ac_add_options --enable-svg
+ac_add_options --enable-canvas
+ac_add_options --enable-default-toolkit=cairo-windows
+ac_add_options --enable-update-packaging

mozilla/tools/tinderbox-configs/firefox/win32/tinder-config.pl

@@ -0,0 +1,253 @@
+#
+## hostname: fx-win32-tbox
+## uname: CYGWIN_NT-5.2 fx-win32-tbox 1.5.19(0.150/4/2) 2006-01-20 13:28 i686 Cygwin
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$ENV{MOZ_INSTALLER_USE_7ZIP} = '1';
+$ENV{NO_EM_RESTART} = '1';
+$ENV{MOZ_PACKAGE_NSIS} = '1';
+
+# $ENV{MOZ_PACKAGE_MSI}
+#-----------------------------------------------------------------------------
+#  Default: 0
+#   Values: 0 | 1
+#  Purpose: Controls whether a MSI package is made.
+# Requires: Windows and a local MakeMSI installation.
+#$ENV{MOZ_PACKAGE_MSI} = 0;
+
+# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
+#-----------------------------------------------------------------------------
+#  Default: scp
+#   Values: scp | rsync
+#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
+# Requires: The selected type requires the command be available both locally
+#           and on the Talkback server.
+#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+$BuildAdministrator = 'build@mozilla.org';
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+#$BuildDepend       = 1;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+#$BuildLocales      = 0;      # Do l10n packaging?
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = "Firefox";
+$VendorName               = "Mozilla";
+
+$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
+$RegxpcomTest             = 1;
+$AliveTest                = 1;
+$JavaTest                 = 0;
+$ViewerTest               = 0;
+$BloatTest                = 0;  # warren memory bloat test
+$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+$DomToTextConversionTest  = 0;  
+$XpcomGlueTest            = 0;
+$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+$MailBloatTest            = 0;
+$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+$LayoutPerformanceTest    = 0;  # Tp
+$DHTMLPerformanceTest     = 0;  # Tdhtml
+$QATest                   = 0;  
+$XULWindowOpenTest        = 0;  # Txul
+$StartupPerformanceTest   = 0;  # Ts
+$NeckoUnitTest            = 0;
+$RenderPerformanceTest    = 0;  # Tgfx
+
+$TestsPhoneHome           = 0;  # Should test report back to server?
+$GraphNameOverride        = 'fx-win32-tbox';
+
+# $results_server
+#----------------------------------------------------------------------------
+# Server on which test results will be accessible.  This was originally tegu,
+# then became axolotl.  Once we moved services from axolotl, it was time
+# to give this service its own hostname to make future transitions easier.
+# - cmp@mozilla.org
+#$results_server           = "build-graphs.mozilla.org";
+
+$pageload_server          = "pageload.build.mozilla.org";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 120;
+
+#$AliveTestTimeout                 = 30;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+$LayoutPerformanceTestTimeout     = 800;  # entire test, seconds
+#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 20;    # seconds
+#$XULWindowOpenTestTimeout	      = 90;   # seconds
+#$NeckoUnitTestTimeout             = 30;    # seconds
+$RenderPerformanceTestTimeout     = 1800;  # seconds
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+$Make          = 'make';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+$blat           = 'd:/moztools/bin/blat';
+$use_blat       = 0;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+#$moz_cvsroot   = $ENV{CVSROOT};
+$moz_cvsroot = ':ext:cltbld@cvs.mozilla.org:/cvsroot';
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+#XXX: this breaks talkback currently
+#$ObjDir = 'fx-trunk';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'TextFrame';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+#$BuildTree  = 'MozillaTest';
+$BuildTree  = 'MozillaExperimental';
+
+#$BuildName = '';
+#$BuildTag = '';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'firefox.exe';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# Release build options
+$ReleaseBuild  = 1;
+$shiptalkback  = 0;
+$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
+$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
+$build_hour    = "7";
+$package_creation_path = "/browser/installer";
+# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
+$ssh_version   = "2";
+#$ssh_user      = "cltbld";
+#$ssh_server    = "stage.mozilla.org";
+$ftp_path      = "/home/ftp/pub/firefox/nightly/experimental/textframe";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/experimental/textframe";
+$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
+$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
+$milestone     = "trunk";
+$notify_list   = 'build-announce@mozilla.org';
+$stub_installer = 0;
+$sea_installer = 1;
+$archive       = 1;
+$push_raw_xpis = 1;
+$update_package = 1;
+$update_product = "Firefox";
+$update_version = "trunk";
+$update_platform = "WINNT_x86-msvc";
+$update_hash = "sha1";
+$update_filehost = "ftp.mozilla.org";
+$update_ver_file = 'browser/config/version.txt';
+$update_pushinfo = 0;
+$crashreporter_buildsymbols = 0;
+$crashreporter_pushsymbols = 0;
+$ENV{SYMBOL_SERVER_HOST} = 'stage.mozilla.org';
+$ENV{SYMBOL_SERVER_USER}   = 'ffxbld';
+$ENV{SYMBOL_SERVER_PATH}   = '/mnt/netapp/breakpad/symbols_ffx/';
+$ENV{SYMBOL_SERVER_SSH_KEY}   = "$ENV{HOME}/.ssh/ffxbld_dsa";
+$ENV{MOZ_SYMBOLS_EXTRA_BUILDID} = 'textframe';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = '';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = '';
+
+# Prevent Extension Manager from spawning child processes during tests
+# - processes that tbox scripts cannot kill. 
+#$ENV{NO_EM_RESTART} = '1';