Bug 391296 – Need an update helper for Shared Databases

r=nelson.


git-svn-id: svn://10.0.0.236/branches/BOB_NOT_REVIEWED@247495 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/security/nss/lib/softoken/sftkdbti.h

@@ -0,0 +1,88 @@
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape security libraries.
+ *
+ * The Initial Developer of the Original Code is
+ * Red Hat Inc.
+ * Portions created by the Initial Developer are Copyright (C) 2007
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#ifndef SFTKDBTI_H
+#define SFTKDBTI_H 1
+
+/*
+ * private defines
+ */
+struct SFTKDBHandleStr {
+    SDB   *db;
+    PRInt32 ref;
+    CK_OBJECT_HANDLE  type;
+    SECItem passwordKey;
+    SECItem *newKey;
+    PZLock *passwordLock;
+    SFTKDBHandle *peerDB;
+    SDB   *update;
+};
+
+#define SFTK_KEYDB_TYPE 0x40000000
+#define SFTK_CERTDB_TYPE 0x00000000
+#define SFTK_OBJ_TYPE_MASK 0xc0000000
+#define SFTK_OBJ_ID_MASK (~SFTK_OBJ_TYPE_MASK)
+#define SFTK_TOKEN_TYPE 0x80000000
+
+/* the following is the number of id's to handle on the stack at a time,
+ * it's not an upper limit of IDS that can be stored in the database */
+#define SFTK_MAX_IDS 10
+
+#define SFTK_GET_SDB(handle) \
+	((handle)->update ? (handle)->update : (handle)->db)
+
+SECStatus sftkdb_DecryptAttribute(SECItem *passKey, SECItem *cipherText,
+			SECItem **plainText);
+SECStatus sftkdb_EncryptAttribute(PLArenaPool *arena, SECItem *passKey,
+			SECItem *plainText, SECItem **cipherText);
+SECStatus sftkdb_SignAttribute(PLArenaPool *arena, SECItem *passKey,
+			CK_OBJECT_HANDLE objectID,
+			CK_ATTRIBUTE_TYPE attrType,
+			SECItem *plainText, SECItem **sigText);
+SECStatus sftkdb_VerifyAttribute(SECItem *passKey,
+			CK_OBJECT_HANDLE objectID,
+			CK_ATTRIBUTE_TYPE attrType,
+			SECItem *plainText, SECItem *sigText);
+
+void sftk_ULong2SDBULong(unsigned char *data, CK_ULONG value);
+CK_RV sftkdb_Update(SFTKDBHandle *handle, SECItem *key);
+CK_RV sftkdb_PutAttributeSignature(SFTKDBHandle *handle, 
+		SDB *keyTarget, CK_OBJECT_HANDLE objectID, 
+		CK_ATTRIBUTE_TYPE type, SECItem *signText);
+
+
+
+#endif

mozilla/tools/tinderbox-configs/firefox/macosx/CLOBBER

@@ -1,6 +0,0 @@
-# List clobbering rationale in this file. Please include bug numbers whenever possible.
-- 20070619: and now libxul is back on again
-- 20070618: clobbering for bug 345517 (enable libxul), after it was backed out for Mac
-- 20070612: clobbering for bug 345517 (enable libxul). Again, after fixing mozconfig
-- 20070612: clobbering for bug 345517 (enable libxul)
-- 20070529: CLOBBER to get symbols uploaded for the first time

mozilla/tools/tinderbox-configs/firefox/macosx/mozconfig

@@ -1,26 +0,0 @@
-#
-## hostname: bm-xservex11.build.mozilla.org
-## uname: Darwin bm-xserve11.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
-#
-
-. $topsrcdir/build/macosx/universal/mozconfig
-
-mk_add_options MOZ_MAKE_FLAGS="-j4"
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging mozilla/tools/codesighs"
-mk_add_options MOZ_CO_PROJECT="browser"
-mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/../build/universal
-mk_add_options MOZ_MAKE_FLAGS="MOZ_ENABLE_NEW_TEXT_FRAME=1"
-
-ac_add_options --enable-application=browser
-ac_add_options --enable-update-channel=nightly
-ac_add_options --enable-optimize="-O2 -g"
-ac_add_options --disable-debug
-ac_add_options --disable-tests
-ac_add_options --enable-update-packaging
-
-# ac_add_options --enable-official-branding
-ac_add_app_options ppc --enable-prebinding
-ac_add_options --enable-svg
-ac_add_options --enable-canvas
-
-ac_add_options --enable-codesighs

mozilla/tools/tinderbox-configs/firefox/macosx/tinder-config.pl

@@ -1,257 +0,0 @@
-#
-## hostname: bm-xservex11.build.mozilla.org
-## uname: Darwin bm-xserve11.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{NO_EM_RESTART} = "1";
-$ENV{DYLD_NO_FIX_PREBINDING} = "1";
-$ENV{LD_PREBIND_ALLOW_OVERLAP} = "1";
-$ENV{CVS_RSH} = "ssh";
-
-$MacUniversalBinary = 1;
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = 'Minefield';
-$VendorName               = "";
-
-$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
-$RegxpcomTest             = 1;
-$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-$LayoutPerformanceTest    = 1;  # Tp
-$LayoutPerformanceLocalTest   = 0;  # Tp2
-$DHTMLPerformanceTest     = 1;  # Tdhtml
-#$QATest                   = 0;  
-$XULWindowOpenTest        = 1;  # Txul
-$StartupPerformanceTest   = 1;  # Ts
-
-$TestsPhoneHome           = 1;  # Should test report back to server?
-
-$GraphNameOverride        = 'xserve11.build.mozilla.org_TextFrame';
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-#$pageload_server          = "spider";  # localhost
-$pageload_server          = "pageload.build.mozilla.org";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-$AliveTestTimeout                 = 10;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
-#$LayoutPerformanceLocalTestTimeout     = 1200;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 15;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-#$Make          = 'gmake';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-#$blat           = 'c:/nstools/bin/blat';
-#$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-#$moz_cvsroot   = $ENV{CVSROOT};
-$moz_cvsroot   = ":ext:cltbld\@cvs.mozilla.org:/cvsroot";
-#$moz_cvsroot   = "/builds/cvs.hourly/cvsroot";
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = '../build/universal';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'TextFrame';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-$BuildTree  = 'MozillaExperimental';
-
-#$BuildName = '';
-#$BuildTag = '';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'firefox-bin';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-#$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
-#$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = "4";
-$package_creation_path = "/browser/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-#$ssh_user      = "cltbld";
-#$ssh_server    = "stage.mozilla.org";
-$ftp_path      = "/home/ftp/pub/firefox/nightly/experimental/textframe";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/experimental/textframe";
-$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
-$milestone     = "trunk";
-$notify_list   = "build-announce\@mozilla.org";
-$stub_installer = 0;
-$sea_installer = 0;
-$archive       = 1;
-#$push_raw_xpis = 1;
-$update_package = 1;
-$update_product = "Firefox";
-$update_version = "trunk";
-$update_platform = "Darwin_Universal-gcc3";
-$update_hash = "md5";
-$update_filehost = "ftp.mozilla.org";
-$update_ver_file = 'browser/config/version.txt';
-$update_pushinfo = 0;
-$crashreporter_buildsymbols = 0;
-$crashreporter_pushsymbols = 0;
-$ENV{SYMBOL_SERVER_HOST} = 'stage.mozilla.org';
-$ENV{SYMBOL_SERVER_USER}   = 'ffxbld';
-$ENV{SYMBOL_SERVER_PATH}   = '/mnt/netapp/breakpad/symbols_ffx/';
-$ENV{SYMBOL_SERVER_SSH_KEY}   = "$ENV{HOME}/.ssh/ffxbld_dsa";
-$ENV{MOZ_SYMBOLS_EXTRA_BUILDID} = 'textframe';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/firefox/win32/CLOBBER

@@ -1,5 +0,0 @@
-# List clobbering rationale in this file. Please include bug numbers whenever possible.
-- 2007/06/12: clobbering for bug 345517 (enable libxul). Again, after fixing mozconfig
-- 2007/06/12: clobbering for bug 345517 (enable libxul)
-- 2007/05/28: clobbering for bug 382141 to get symbols uploaded
-- 2007/05/22: clobbering a win32 trunk build to test aus2 migration (see http://wiki.mozilla.org/WeeklyUpdates/2007-05-21#Build and http://weblogs.mozillazine.org/preed/2007/05/aus2s_a_movin_can_you_help_us.html)

mozilla/tools/tinderbox-configs/firefox/win32/mozconfig

@@ -1,24 +0,0 @@
-#
-## hostname: fxexp-win32-tbox
-## uname: CYGWIN_NT-5.2 fx-win32-tbox 1.5.19(0.150/4/2) 2006-01-20 13:28 i686 Cygwin
-#
-
-# . $topsrcdir/browser/config/mozconfig
-
-mk_add_options MOZ_CO_PROJECT=browser
-mk_add_options MOZ_MAKE_FLAGS="-j5"
-mk_add_options MOZ_MAKE_FLAGS="MOZ_ENABLE_NEW_TEXT_FRAME=1"
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
-mk_add_options MOZ_PACKAGE_NSIS=1
-
-ac_add_options --enable-application=browser
-ac_add_options --enable-update-channel=nightly
-ac_add_options --enable-optimize
-ac_add_options --disable-debug
-# ac_add_options --enable-codesighs
-ac_add_options --disable-tests
-# ac_add_options --enable-official-branding
-ac_add_options --enable-svg
-ac_add_options --enable-canvas
-ac_add_options --enable-default-toolkit=cairo-windows
-ac_add_options --enable-update-packaging

mozilla/tools/tinderbox-configs/firefox/win32/tinder-config.pl

@@ -1,253 +0,0 @@
-#
-## hostname: fx-win32-tbox
-## uname: CYGWIN_NT-5.2 fx-win32-tbox 1.5.19(0.150/4/2) 2006-01-20 13:28 i686 Cygwin
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{MOZ_INSTALLER_USE_7ZIP} = '1';
-$ENV{NO_EM_RESTART} = '1';
-$ENV{MOZ_PACKAGE_NSIS} = '1';
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "Firefox";
-$VendorName               = "Mozilla";
-
-$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
-$RegxpcomTest             = 1;
-$AliveTest                = 1;
-$JavaTest                 = 0;
-$ViewerTest               = 0;
-$BloatTest                = 0;  # warren memory bloat test
-$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-$DomToTextConversionTest  = 0;  
-$XpcomGlueTest            = 0;
-$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-$MailBloatTest            = 0;
-$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-$LayoutPerformanceTest    = 0;  # Tp
-$DHTMLPerformanceTest     = 0;  # Tdhtml
-$QATest                   = 0;  
-$XULWindowOpenTest        = 0;  # Txul
-$StartupPerformanceTest   = 0;  # Ts
-$NeckoUnitTest            = 0;
-$RenderPerformanceTest    = 0;  # Tgfx
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-$GraphNameOverride        = 'fx-win32-tbox';
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-$pageload_server          = "pageload.build.mozilla.org";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 30;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-$LayoutPerformanceTestTimeout     = 800;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 20;    # seconds
-#$XULWindowOpenTestTimeout	      = 90;   # seconds
-#$NeckoUnitTestTimeout             = 30;    # seconds
-$RenderPerformanceTestTimeout     = 1800;  # seconds
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-$Make          = 'make';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-$blat           = 'd:/moztools/bin/blat';
-$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-#$moz_cvsroot   = $ENV{CVSROOT};
-$moz_cvsroot = ':ext:cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-#XXX: this breaks talkback currently
-#$ObjDir = 'fx-trunk';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'TextFrame';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-#$BuildTree  = 'MozillaTest';
-$BuildTree  = 'MozillaExperimental';
-
-#$BuildName = '';
-#$BuildTag = '';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'firefox.exe';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = "7";
-$package_creation_path = "/browser/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-#$ssh_user      = "cltbld";
-#$ssh_server    = "stage.mozilla.org";
-$ftp_path      = "/home/ftp/pub/firefox/nightly/experimental/textframe";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/experimental/textframe";
-$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
-$milestone     = "trunk";
-$notify_list   = 'build-announce@mozilla.org';
-$stub_installer = 0;
-$sea_installer = 1;
-$archive       = 1;
-$push_raw_xpis = 1;
-$update_package = 1;
-$update_product = "Firefox";
-$update_version = "trunk";
-$update_platform = "WINNT_x86-msvc";
-$update_hash = "sha1";
-$update_filehost = "ftp.mozilla.org";
-$update_ver_file = 'browser/config/version.txt';
-$update_pushinfo = 0;
-$crashreporter_buildsymbols = 0;
-$crashreporter_pushsymbols = 0;
-$ENV{SYMBOL_SERVER_HOST} = 'stage.mozilla.org';
-$ENV{SYMBOL_SERVER_USER}   = 'ffxbld';
-$ENV{SYMBOL_SERVER_PATH}   = '/mnt/netapp/breakpad/symbols_ffx/';
-$ENV{SYMBOL_SERVER_SSH_KEY}   = "$ENV{HOME}/.ssh/ffxbld_dsa";
-$ENV{MOZ_SYMBOLS_EXTRA_BUILDID} = 'textframe';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';