Bug 391056 - "Swap to SQLite-based pageload server (take three)" [p=reed r=BuildTeam]

git-svn-id: svn://10.0.0.236/branches/feature_textframe@231635 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/camino/config/version.txt

@@ -1 +0,0 @@
-2.0.5

mozilla/content/events/src/nsQueryContentEventHandler.cpp

@@ -1,577 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
-/* vim: set ts=2 sw=2 et tw=80: */
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is
- * Mozilla Japan.
- * Portions created by the Initial Developer are Copyright (C) 2008
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *   Masayuki Nakano <masayuki@d-toybox.com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either of the GNU General Public License Version 2 or later (the "GPL"),
- * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-#include "nsQueryContentEventHandler.h"
-#include "nsCOMPtr.h"
-#include "nsPresContext.h"
-#include "nsIPresShell.h"
-#include "nsISelection.h"
-#include "nsIDOMText.h"
-#include "nsIDOMRange.h"
-#include "nsRange.h"
-#include "nsGUIEvent.h"
-#include "nsICaret.h"
-#include "nsFrameSelection.h"
-#include "nsIFrame.h"
-#include "nsIView.h"
-#include "nsIContentIterator.h"
-#include "nsTextFragment.h"
-#include "nsTextFrame.h"
-
-nsresult NS_NewContentIterator(nsIContentIterator** aInstancePtrResult);
-
-/******************************************************************/
-/* nsQueryContentEventHandler                                     */
-/******************************************************************/
-
-nsQueryContentEventHandler::nsQueryContentEventHandler(
-                              nsPresContext* aPresContext) :
-  mPresContext(aPresContext),
-  mPresShell(aPresContext->GetPresShell()), mSelection(nsnull),
-  mFirstSelectedRange(nsnull), mRootContent(nsnull)
-{
-}
-
-nsresult
-nsQueryContentEventHandler::Init(nsQueryContentEvent* aEvent)
-{
-  NS_ASSERTION(aEvent, "aEvent must not be null");
-
-  if (mSelection)
-    return NS_OK;
-
-  aEvent->mSucceeded = PR_FALSE;
-
-  if (!mPresShell)
-    return NS_ERROR_NOT_AVAILABLE;
-
-  nsresult rv = mPresShell->GetSelectionForCopy(getter_AddRefs(mSelection));
-  NS_ENSURE_SUCCESS(rv, rv);
-  NS_ASSERTION(mSelection,
-               "GetSelectionForCopy succeeded, but the result is null");
-
-  nsCOMPtr<nsIDOMRange> firstRange;
-  rv = mSelection->GetRangeAt(0, getter_AddRefs(firstRange));
-  // This shell doesn't support selection.
-  if (NS_FAILED(rv))
-    return NS_ERROR_NOT_AVAILABLE;
-  mFirstSelectedRange = do_QueryInterface(firstRange);
-  NS_ENSURE_TRUE(mFirstSelectedRange, NS_ERROR_FAILURE);
-
-  nsINode* startNode = mFirstSelectedRange->GetStartParent();
-  NS_ENSURE_TRUE(startNode, NS_ERROR_FAILURE);
-  mRootContent = startNode->GetSelectionRootContent(mPresShell);
-  NS_ENSURE_TRUE(mRootContent, NS_ERROR_FAILURE);
-
-  aEvent->mReply.mContentsRoot = mRootContent.get();
-
-  return NS_OK;
-}
-
-static void ConvertToNativeNewlines(nsAFlatString& aString)
-{
-#if defined(XP_MACOSX)
-  aString.ReplaceSubstring(NS_LITERAL_STRING("\n"), NS_LITERAL_STRING("\r"));
-#elif defined(XP_WIN)
-  aString.ReplaceSubstring(NS_LITERAL_STRING("\n"), NS_LITERAL_STRING("\r\n"));
-#endif
-}
-
-static void ConvertToXPNewlines(nsAFlatString& aString)
-{
-#if defined(XP_MACOSX)
-  aString.ReplaceSubstring(NS_LITERAL_STRING("\r"), NS_LITERAL_STRING("\n"));
-#elif defined(XP_WIN)
-  aString.ReplaceSubstring(NS_LITERAL_STRING("\r\n"), NS_LITERAL_STRING("\n"));
-#endif
-}
-
-static void AppendString(nsAString& aString, nsIContent* aContent)
-{
-  NS_ASSERTION(aContent->IsNodeOfType(nsINode::eTEXT),
-               "aContent is not a text node!");
-  const nsTextFragment* text = aContent->GetText();
-  if (!text)
-    return;
-  text->AppendTo(aString);
-}
-
-static void AppendSubString(nsAString& aString, nsIContent* aContent,
-                            PRUint32 aXPOffset, PRUint32 aXPLength)
-{
-  NS_ASSERTION(aContent->IsNodeOfType(nsINode::eTEXT),
-               "aContent is not a text node!");
-  const nsTextFragment* text = aContent->GetText();
-  if (!text)
-    return;
-  text->AppendTo(aString, PRInt32(aXPOffset), PRInt32(aXPLength));
-}
-
-static PRUint32 GetNativeTextLength(nsIContent* aContent)
-{
-  nsAutoString str;
-  if (aContent->IsNodeOfType(nsINode::eTEXT))
-    AppendString(str, aContent);
-  else if (aContent->IsNodeOfType(nsINode::eHTML) &&
-           aContent->Tag() == nsGkAtoms::br)
-    str.Assign(PRUnichar('\n'));
-  ConvertToNativeNewlines(str);
-  return str.Length();
-}
-
-static PRUint32 ConvertToXPOffset(nsIContent* aContent, PRUint32 aNativeOffset)
-{
-
-  nsAutoString str;
-  AppendString(str, aContent);
-  ConvertToNativeNewlines(str);
-  NS_ASSERTION(aNativeOffset <= str.Length(),
-               "aOffsetForNativeLF is too large!");
-  str.Truncate(aNativeOffset);
-  ConvertToXPNewlines(str);
-  return str.Length();
-}
-
-nsresult
-nsQueryContentEventHandler::GenerateFlatTextContent(nsIRange* aRange,
-                                                    nsAFlatString& aString)
-{
-  nsCOMPtr<nsIContentIterator> iter;
-  nsresult rv = NS_NewContentIterator(getter_AddRefs(iter));
-  NS_ENSURE_SUCCESS(rv, rv);
-  NS_ASSERTION(iter, "NS_NewContentIterator succeeded, but the result is null");
-  nsCOMPtr<nsIDOMRange> domRange(do_QueryInterface(aRange));
-  NS_ASSERTION(domRange, "aRange doesn't have nsIDOMRange!");
-  iter->Init(domRange);
-
-  NS_ASSERTION(aString.IsEmpty(), "aString must be empty string");
-
-  nsINode* startNode = aRange->GetStartParent();
-  NS_ENSURE_TRUE(startNode, NS_ERROR_FAILURE);
-  nsINode* endNode = aRange->GetEndParent();
-  NS_ENSURE_TRUE(endNode, NS_ERROR_FAILURE);
-
-  if (startNode == endNode && startNode->IsNodeOfType(nsINode::eTEXT)) {
-    nsIContent* content = static_cast<nsIContent*>(startNode);
-    AppendSubString(aString, content, aRange->StartOffset(),
-                    aRange->EndOffset() - aRange->StartOffset());
-    ConvertToNativeNewlines(aString);
-    return NS_OK;
-  }
-
-  nsAutoString tmpStr;
-  for (; !iter->IsDone(); iter->Next()) {
-    nsIContent* content = iter->GetCurrentNode();
-    if (!content)
-      continue;
-
-    if (content->IsNodeOfType(nsINode::eTEXT)) {
-      if (content == startNode)
-        AppendSubString(aString, content, aRange->StartOffset(),
-                        content->TextLength() - aRange->StartOffset());
-      else if (content == endNode)
-        AppendSubString(aString, content, 0, aRange->EndOffset());
-      else
-        AppendString(aString, content);
-    } else if (content->IsNodeOfType(nsINode::eHTML) &&
-               content->Tag() == nsGkAtoms::br)
-        aString.Append(PRUnichar('\n'));
-  }
-  ConvertToNativeNewlines(aString);
-  return NS_OK;
-}
-
-nsresult
-nsQueryContentEventHandler::ExpandToClusterBoundary(nsIContent* aContent,
-                                                    PRBool aForward,
-                                                    PRUint32* aXPOffset)
-{
-  NS_ASSERTION(*aXPOffset >= 0 && *aXPOffset <= aContent->TextLength(),
-               "offset is out of range.");
-
-  // XXX This method assumes that the frame boundaries must be cluster
-  // boundaries. It's false, but no problem now, maybe.
-  if (!aContent->IsNodeOfType(nsINode::eTEXT) ||
-      *aXPOffset == 0 || *aXPOffset == aContent->TextLength())
-    return NS_OK;
-  nsCOMPtr<nsFrameSelection> fs = mPresShell->FrameSelection();
-  PRInt32 offsetInFrame;
-  nsFrameSelection::HINT hint =
-    aForward ? nsFrameSelection::HINTLEFT : nsFrameSelection::HINTRIGHT;
-  nsIFrame* frame = fs->GetFrameForNodeOffset(aContent, PRInt32(*aXPOffset),
-                                              hint, &offsetInFrame);
-  if (!frame) {
-    // This content doesn't have any frames, we only can check surrogate pair...
-    const nsTextFragment* text = aContent->GetText();
-    NS_ENSURE_TRUE(text, NS_ERROR_FAILURE);
-    if (NS_IS_LOW_SURROGATE(text->CharAt(*aXPOffset)) &&
-        NS_IS_HIGH_SURROGATE(text->CharAt(*aXPOffset - 1)))
-      *aXPOffset += aForward ? 1 : -1;
-    return NS_OK;
-  }
-  PRInt32 startOffset, endOffset;
-  nsresult rv = frame->GetOffsets(startOffset, endOffset);
-  NS_ENSURE_SUCCESS(rv, rv);
-  if (*aXPOffset == PRUint32(startOffset) || *aXPOffset == PRUint32(endOffset))
-    return NS_OK;
-  if (frame->GetType() != nsGkAtoms::textFrame)
-    return NS_ERROR_FAILURE;
-  nsTextFrame* textFrame = static_cast<nsTextFrame*>(frame);
-  PRInt32 newOffsetInFrame = offsetInFrame;
-  newOffsetInFrame += aForward ? -1 : 1;
-  textFrame->PeekOffsetCharacter(aForward, &newOffsetInFrame);
-  *aXPOffset = startOffset + newOffsetInFrame;
-  return NS_OK;
-}
-
-nsresult
-nsQueryContentEventHandler::SetRangeFromFlatTextOffset(
-                              nsIRange* aRange,
-                              PRUint32 aNativeOffset,
-                              PRUint32 aNativeLength,
-                              PRBool aExpandToClusterBoundaries)
-{
-  nsCOMPtr<nsIContentIterator> iter;
-  nsresult rv = NS_NewContentIterator(getter_AddRefs(iter));
-  NS_ENSURE_SUCCESS(rv, rv);
-  NS_ASSERTION(iter, "NS_NewContentIterator succeeded, but the result is null");
-  rv = iter->Init(mRootContent);
-  NS_ENSURE_SUCCESS(rv, rv);
-  nsCOMPtr<nsIDOMRange> domRange(do_QueryInterface(aRange));
-  NS_ASSERTION(domRange, "aRange doesn't have nsIDOMRange!");
-
-  PRUint32 nativeOffset = 0;
-  PRUint32 nativeEndOffset = aNativeOffset + aNativeLength;
-  nsIContent* content = nsnull;
-  for (; !iter->IsDone(); iter->Next()) {
-    content = iter->GetCurrentNode();
-    if (!content)
-      continue;
-
-    PRUint32 nativeTextLength;
-    nativeTextLength = GetNativeTextLength(content);
-    if (nativeTextLength == 0)
-      continue;
-
-    if (nativeOffset <= aNativeOffset &&
-        aNativeOffset < nativeOffset + nativeTextLength) {
-      nsCOMPtr<nsIDOMNode> domNode(do_QueryInterface(content));
-      NS_ASSERTION(domNode, "aContent doesn't have nsIDOMNode!");
-
-      PRUint32 xpOffset =
-        content->IsNodeOfType(nsINode::eTEXT) ?
-          ConvertToXPOffset(content, aNativeOffset - nativeOffset) : 0;
-
-      if (aExpandToClusterBoundaries) {
-        rv = ExpandToClusterBoundary(content, PR_FALSE, &xpOffset);
-        NS_ENSURE_SUCCESS(rv, rv);
-      }
-
-      rv = domRange->SetStart(domNode, PRInt32(xpOffset));
-      NS_ENSURE_SUCCESS(rv, rv);
-      if (aNativeLength == 0) {
-        // Ensure that the end offset and the start offset are same.
-        rv = domRange->SetEnd(domNode, PRInt32(xpOffset));
-        NS_ENSURE_SUCCESS(rv, rv);
-        return NS_OK;
-      }
-    }
-    if (nativeEndOffset <= nativeOffset + nativeTextLength) {
-      nsCOMPtr<nsIDOMNode> domNode(do_QueryInterface(content));
-      NS_ASSERTION(domNode, "aContent doesn't have nsIDOMNode!");
-
-      PRUint32 xpOffset;
-      if (content->IsNodeOfType(nsINode::eTEXT)) {
-        xpOffset = ConvertToXPOffset(content, nativeEndOffset - nativeOffset);
-        if (aExpandToClusterBoundaries) {
-          rv = ExpandToClusterBoundary(content, PR_TRUE, &xpOffset);
-          NS_ENSURE_SUCCESS(rv, rv);
-        }
-      } else {
-        // Use first position of next node, because the end node is ignored
-        // by ContentIterator when the offset is zero.
-        xpOffset = 0;
-        iter->Next();
-        if (iter->IsDone())
-          break;
-        domNode = do_QueryInterface(iter->GetCurrentNode());
-      }
-
-      rv = domRange->SetEnd(domNode, PRInt32(xpOffset));
-      NS_ENSURE_SUCCESS(rv, rv);
-      return NS_OK;
-    }
-
-    nativeOffset += nativeTextLength;
-  }
-
-  if (nativeOffset < aNativeOffset)
-    return NS_ERROR_FAILURE;
-
-  nsCOMPtr<nsIDOMNode> domNode(do_QueryInterface(mRootContent));
-  NS_ASSERTION(domNode, "lastContent doesn't have nsIDOMNode!");
-  if (!content) {
-    rv = domRange->SetStart(domNode, 0);
-    NS_ENSURE_SUCCESS(rv, rv);
-  }
-  rv = domRange->SetEnd(domNode, PRInt32(mRootContent->GetChildCount()));
-  NS_ASSERTION(NS_SUCCEEDED(rv), "nsIDOMRange::SetEnd failed");
-  return rv;
-}
-
-nsresult
-nsQueryContentEventHandler::OnQuerySelectedText(nsQueryContentEvent* aEvent)
-{
-  nsresult rv = Init(aEvent);
-  if (NS_FAILED(rv))
-    return rv;
-
-  NS_ASSERTION(aEvent->mReply.mString.IsEmpty(),
-               "The reply string must be empty");
-
-  rv = GetFlatTextOffsetOfRange(mFirstSelectedRange, &aEvent->mReply.mOffset);
-  NS_ENSURE_SUCCESS(rv, rv);
-
-  PRBool isCollapsed;
-  rv = mSelection->GetIsCollapsed(&isCollapsed);
-  NS_ENSURE_SUCCESS(rv, rv);
-
-  if (!isCollapsed) {
-    nsCOMPtr<nsIDOMRange> domRange;
-    rv = mSelection->GetRangeAt(0, getter_AddRefs(domRange));
-    NS_ENSURE_SUCCESS(rv, rv);
-    NS_ASSERTION(domRange, "GetRangeAt succeeded, but the result is null");
-
-    nsCOMPtr<nsIRange> range(do_QueryInterface(domRange));
-    NS_ENSURE_TRUE(range, NS_ERROR_FAILURE);
-    rv = GenerateFlatTextContent(range, aEvent->mReply.mString);
-    NS_ENSURE_SUCCESS(rv, rv);
-  }
-
-  aEvent->mSucceeded = PR_TRUE;
-  return NS_OK;
-}
-
-nsresult
-nsQueryContentEventHandler::OnQueryTextContent(nsQueryContentEvent* aEvent)
-{
-  nsresult rv = Init(aEvent);
-  if (NS_FAILED(rv))
-    return rv;
-
-  NS_ASSERTION(aEvent->mReply.mString.IsEmpty(),
-               "The reply string must be empty");
-
-  nsCOMPtr<nsIRange> range = new nsRange();
-  NS_ENSURE_TRUE(range, NS_ERROR_OUT_OF_MEMORY);
-  rv = SetRangeFromFlatTextOffset(range, aEvent->mInput.mOffset,
-                                  aEvent->mInput.mLength, PR_FALSE);
-  NS_ENSURE_SUCCESS(rv, rv);
-
-  rv = GenerateFlatTextContent(range, aEvent->mReply.mString);
-  NS_ENSURE_SUCCESS(rv, rv);
-
-  aEvent->mSucceeded = PR_TRUE;
-
-  return NS_OK;
-}
-
-nsresult
-nsQueryContentEventHandler::QueryRectFor(nsQueryContentEvent* aEvent,
-                                         nsIRange* aRange,
-                                         nsICaret* aCaret)
-{
-  PRInt32 offsetInFrame;
-  nsIFrame* frame;
-  nsresult rv = GetStartFrameAndOffset(aRange, &frame, &offsetInFrame);
-  NS_ENSURE_SUCCESS(rv, rv);
-
-  nsPoint posInFrame;
-  rv = frame->GetPointFromOffset(aRange->StartOffset(), &posInFrame);
-  NS_ENSURE_SUCCESS(rv, rv);
-
-  aEvent->mReply.mRect.y = posInFrame.y;
-  aEvent->mReply.mRect.height = frame->GetSize().height;
-
-  if (aEvent->message == NS_QUERY_CHARACTER_RECT) {
-    nsPoint nextPos;
-    rv = frame->GetPointFromOffset(aRange->EndOffset(), &nextPos);
-    NS_ENSURE_SUCCESS(rv, rv);
-    aEvent->mReply.mRect.x = PR_MIN(posInFrame.x, nextPos.x);
-    aEvent->mReply.mRect.width = PR_ABS(posInFrame.x - nextPos.x);
-  } else {
-    aEvent->mReply.mRect.x = posInFrame.x;
-    aEvent->mReply.mRect.width = aCaret->GetCaretRect().width;
-  }
-
-  // The coordinates are app units here, they will be converted to system
-  // coordinates by view manager.
-  rv = ConvertToRootViewRelativeOffset(frame, aEvent->mReply.mRect);
-  NS_ENSURE_SUCCESS(rv, rv);
-
-  aEvent->mSucceeded = PR_TRUE;
-  return NS_OK;
-}
-
-nsresult
-nsQueryContentEventHandler::OnQueryCharacterRect(nsQueryContentEvent* aEvent)
-{
-  nsresult rv = Init(aEvent);
-  if (NS_FAILED(rv))
-    return rv;
-
-  nsCOMPtr<nsIRange> range = new nsRange();
-  NS_ENSURE_TRUE(range, NS_ERROR_OUT_OF_MEMORY);
-  rv = SetRangeFromFlatTextOffset(range, aEvent->mInput.mOffset, 1, PR_TRUE);
-  NS_ENSURE_SUCCESS(rv, rv);
-
-  if (range->Collapsed()) {
-    // There is no character at the offset.
-    return NS_OK;
-  }
-
-  return QueryRectFor(aEvent, range, nsnull);
-}
-
-nsresult
-nsQueryContentEventHandler::OnQueryCaretRect(nsQueryContentEvent* aEvent)
-{
-  nsresult rv = Init(aEvent);
-  if (NS_FAILED(rv))
-    return rv;
-
-  nsCOMPtr<nsICaret> caret;
-  rv = mPresShell->GetCaret(getter_AddRefs(caret));
-  NS_ENSURE_SUCCESS(rv, rv);
-  NS_ASSERTION(caret, "GetCaret succeeded, but the result is null");
-
-  // When the selection is collapsed and the queried offset is current caret
-  // position, we should return the "real" caret rect.
-  PRBool selectionIsCollapsed;
-  rv = mSelection->GetIsCollapsed(&selectionIsCollapsed);
-  NS_ENSURE_SUCCESS(rv, rv);
-
-  if (selectionIsCollapsed) {
-    PRUint32 offset;
-    rv = GetFlatTextOffsetOfRange(mFirstSelectedRange, &offset);
-    NS_ENSURE_SUCCESS(rv, rv);
-    if (offset == aEvent->mInput.mOffset) {
-      PRBool isCollapsed;
-      rv = caret->GetCaretCoordinates(nsICaret::eTopLevelWindowCoordinates,
-                                      mSelection, &aEvent->mReply.mRect,
-                                      &isCollapsed, nsnull);
-      NS_ENSURE_SUCCESS(rv, rv);
-      aEvent->mSucceeded = PR_TRUE;
-      return NS_OK;
-    }
-  }
-
-  // Otherwise, we should set the guessed caret rect.
-  nsCOMPtr<nsIRange> range = new nsRange();
-  NS_ENSURE_TRUE(range, NS_ERROR_OUT_OF_MEMORY);
-  rv = SetRangeFromFlatTextOffset(range, aEvent->mInput.mOffset, 0, PR_TRUE);
-  NS_ENSURE_SUCCESS(rv, rv);
-
-  return QueryRectFor(aEvent, range, caret);
-}
-
-nsresult
-nsQueryContentEventHandler::GetFlatTextOffsetOfRange(nsIRange* aRange,
-                                                     PRUint32* aNativeOffset)
-{
-  NS_ASSERTION(aNativeOffset, "param is invalid");
-
-  nsCOMPtr<nsIRange> prev = new nsRange();
-  NS_ENSURE_TRUE(prev, NS_ERROR_OUT_OF_MEMORY);
-  nsCOMPtr<nsIDOMRange> domPrev(do_QueryInterface(prev));
-  NS_ASSERTION(domPrev, "nsRange doesn't have nsIDOMRange??");
-  nsCOMPtr<nsIDOMNode> rootDOMNode(do_QueryInterface(mRootContent));
-  domPrev->SetStart(rootDOMNode, 0);
-
-  nsINode* startNode = aRange->GetStartParent();
-  NS_ENSURE_TRUE(startNode, NS_ERROR_FAILURE);
-
-  PRInt32 startOffset = aRange->StartOffset();
-  nsCOMPtr<nsIDOMNode> startDOMNode(do_QueryInterface(startNode));
-  NS_ASSERTION(startDOMNode, "startNode doesn't have nsIDOMNode");
-  domPrev->SetEnd(startDOMNode, startOffset);
-
-  nsAutoString prevStr;
-  nsresult rv = GenerateFlatTextContent(prev, prevStr);
-  NS_ENSURE_SUCCESS(rv, rv);
-  *aNativeOffset = prevStr.Length();
-  return NS_OK;
-}
-
-nsresult
-nsQueryContentEventHandler::GetStartFrameAndOffset(nsIRange* aRange,
-                                                   nsIFrame** aFrame,
-                                                   PRInt32* aOffsetInFrame)
-{
-  NS_ASSERTION(aRange && aFrame && aOffsetInFrame, "params are invalid");
-
-  nsIContent* content = nsnull;
-  nsINode* node = aRange->GetStartParent();
-  if (node && node->IsNodeOfType(nsINode::eCONTENT))
-    content = static_cast<nsIContent*>(node);
-  NS_ASSERTION(content, "the start node doesn't have nsIContent!");
-
-  nsCOMPtr<nsFrameSelection> fs = mPresShell->FrameSelection();
-  *aFrame = fs->GetFrameForNodeOffset(content, aRange->StartOffset(),
-                                      fs->GetHint(), aOffsetInFrame);
-  NS_ENSURE_TRUE((*aFrame), NS_ERROR_FAILURE);
-  NS_ASSERTION((*aFrame)->GetType() == nsGkAtoms::textFrame,
-               "The frame is not textframe");
-  return NS_OK;
-}
-
-nsresult
-nsQueryContentEventHandler::ConvertToRootViewRelativeOffset(nsIFrame* aFrame,
-                                                            nsRect& aRect)
-{
-  NS_ASSERTION(aFrame, "aFrame must not be null");
-
-  nsIView* view = nsnull;
-  nsPoint posInView;
-  aFrame->GetOffsetFromView(posInView, &view);
-  if (!view)
-    return NS_ERROR_FAILURE;
-  aRect += posInView + view->GetOffsetTo(nsnull);
-  return NS_OK;
-}

mozilla/js/src/jsmath.c

@@ -1,532 +0,0 @@
-/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
- *
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Communicator client code, released
- * March 31, 1998.
- *
- * The Initial Developer of the Original Code is
- * Netscape Communications Corporation.
- * Portions created by the Initial Developer are Copyright (C) 1998
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either of the GNU General Public License Version 2 or later (the "GPL"),
- * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-/*
- * JS math package.
- */
-#include "jsstddef.h"
-#include "jslibmath.h"
-#include <stdlib.h>
-#include "jstypes.h"
-#include "jslong.h"
-#include "prmjtime.h"
-#include "jsapi.h"
-#include "jsatom.h"
-#include "jscntxt.h"
-#include "jsconfig.h"
-#include "jslock.h"
-#include "jsmath.h"
-#include "jsnum.h"
-#include "jsobj.h"
-
-#ifndef M_E
-#define M_E             2.7182818284590452354
-#endif
-#ifndef M_LOG2E
-#define M_LOG2E         1.4426950408889634074
-#endif
-#ifndef M_LOG10E
-#define M_LOG10E        0.43429448190325182765
-#endif
-#ifndef M_LN2
-#define M_LN2           0.69314718055994530942
-#endif
-#ifndef M_LN10
-#define M_LN10          2.30258509299404568402
-#endif
-#ifndef M_PI
-#define M_PI            3.14159265358979323846
-#endif
-#ifndef M_SQRT2
-#define M_SQRT2         1.41421356237309504880
-#endif
-#ifndef M_SQRT1_2
-#define M_SQRT1_2       0.70710678118654752440
-#endif
-
-static JSConstDoubleSpec math_constants[] = {
-    {M_E,       "E",            0, {0,0,0}},
-    {M_LOG2E,   "LOG2E",        0, {0,0,0}},
-    {M_LOG10E,  "LOG10E",       0, {0,0,0}},
-    {M_LN2,     "LN2",          0, {0,0,0}},
-    {M_LN10,    "LN10",         0, {0,0,0}},
-    {M_PI,      "PI",           0, {0,0,0}},
-    {M_SQRT2,   "SQRT2",        0, {0,0,0}},
-    {M_SQRT1_2, "SQRT1_2",      0, {0,0,0}},
-    {0,0,0,{0,0,0}}
-};
-
-JSClass js_MathClass = {
-    js_Math_str,
-    JSCLASS_HAS_CACHED_PROTO(JSProto_Math),
-    JS_PropertyStub,  JS_PropertyStub,  JS_PropertyStub,  JS_PropertyStub,
-    JS_EnumerateStub, JS_ResolveStub,   JS_ConvertStub,   JS_FinalizeStub,
-    JSCLASS_NO_OPTIONAL_MEMBERS
-};
-
-static JSBool
-math_abs(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_fabs(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_acos(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-#if !JS_USE_FDLIBM_MATH && defined(SOLARIS) && defined(__GNUC__)
-    if (x < -1 || 1 < x) {
-        *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNaN);
-        return JS_TRUE;
-    }
-#endif
-    z = fd_acos(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_asin(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-#if !JS_USE_FDLIBM_MATH && defined(SOLARIS) && defined(__GNUC__)
-    if (x < -1 || 1 < x) {
-        *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNaN);
-        return JS_TRUE;
-    }
-#endif
-    z = fd_asin(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_atan(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_atan(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_atan2(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, y, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    y = js_ValueToNumber(cx, &vp[3]);
-    if (JSVAL_IS_NULL(vp[3]))
-        return JS_FALSE;
-#if !JS_USE_FDLIBM_MATH && defined(_MSC_VER)
-    /*
-     * MSVC's atan2 does not yield the result demanded by ECMA when both x
-     * and y are infinite.
-     * - The result is a multiple of pi/4.
-     * - The sign of x determines the sign of the result.
-     * - The sign of y determines the multiplicator, 1 or 3.
-     */
-    if (JSDOUBLE_IS_INFINITE(x) && JSDOUBLE_IS_INFINITE(y)) {
-        z = fd_copysign(M_PI / 4, x);
-        if (y < 0)
-            z *= 3;
-        return js_NewDoubleInRootedValue(cx, z, vp);
-    }
-#endif
-
-#if !JS_USE_FDLIBM_MATH && defined(SOLARIS) && defined(__GNUC__)
-    if (x == 0) {
-        if (JSDOUBLE_IS_NEGZERO(y)) {
-            z = fd_copysign(M_PI, x);
-            return js_NewDoubleInRootedValue(cx, z, vp);
-        }
-        if (y == 0) {
-            z = x;
-            return js_NewDoubleInRootedValue(cx, z, vp);
-        }
-    }
-#endif
-    z = fd_atan2(x, y);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_ceil(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_ceil(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_cos(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_cos(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_exp(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-#ifdef _WIN32
-    if (!JSDOUBLE_IS_NaN(x)) {
-        if (x == *cx->runtime->jsPositiveInfinity) {
-            *vp = DOUBLE_TO_JSVAL(cx->runtime->jsPositiveInfinity);
-            return JS_TRUE;
-        }
-        if (x == *cx->runtime->jsNegativeInfinity) {
-            *vp = JSVAL_ZERO;
-            return JS_TRUE;
-        }
-    }
-#endif
-    z = fd_exp(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_floor(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_floor(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_log(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-#if !JS_USE_FDLIBM_MATH && defined(SOLARIS) && defined(__GNUC__)
-    if (x < 0) {
-        *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNaN);
-        return JS_TRUE;
-    }
-#endif
-    z = fd_log(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_max(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z = *cx->runtime->jsNegativeInfinity;
-    jsval *argv;
-    uintN i;
-
-    if (argc == 0) {
-        *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNegativeInfinity);
-        return JS_TRUE;
-    }
-    argv = vp + 2;
-    for (i = 0; i < argc; i++) {
-        x = js_ValueToNumber(cx, &argv[i]);
-        if (JSVAL_IS_NULL(argv[i]))
-            return JS_FALSE;
-        if (JSDOUBLE_IS_NaN(x)) {
-            *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNaN);
-            return JS_TRUE;
-        }
-        if (x == 0 && x == z && fd_copysign(1.0, z) == -1)
-            z = x;
-        else
-            z = (x > z) ? x : z;
-    }
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_min(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z = *cx->runtime->jsPositiveInfinity;
-    jsval *argv;
-    uintN i;
-
-    if (argc == 0) {
-        *vp = DOUBLE_TO_JSVAL(cx->runtime->jsPositiveInfinity);
-        return JS_TRUE;
-    }
-    argv = vp + 2;
-    for (i = 0; i < argc; i++) {
-        x = js_ValueToNumber(cx, &argv[i]);
-        if (JSVAL_IS_NULL(argv[i]))
-            return JS_FALSE;
-        if (JSDOUBLE_IS_NaN(x)) {
-            *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNaN);
-            return JS_TRUE;
-        }
-        if (x == 0 && x == z && fd_copysign(1.0,x) == -1)
-            z = x;
-        else
-            z = (x < z) ? x : z;
-    }
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_pow(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, y, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    y = js_ValueToNumber(cx, &vp[3]);
-    if (JSVAL_IS_NULL(vp[3]))
-        return JS_FALSE;
-#if !JS_USE_FDLIBM_MATH
-    /*
-     * Because C99 and ECMA specify different behavior for pow(),
-     * we need to wrap the libm call to make it ECMA compliant.
-     */
-    if (!JSDOUBLE_IS_FINITE(y) && (x == 1.0 || x == -1.0)) {
-        *vp = DOUBLE_TO_JSVAL(cx->runtime->jsNaN);
-        return JS_TRUE;
-    }
-    /* pow(x, +-0) is always 1, even for x = NaN. */
-    if (y == 0) {
-        *vp = JSVAL_ONE;
-        return JS_TRUE;
-    }
-#endif
-    z = fd_pow(x, y);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static const int64 RNG_MULTIPLIER = 0x5DEECE66DLL;
-static const int64 RNG_ADDEND = 0xBLL;
-static const int64 RNG_MASK = (1LL << 48) - 1;
-static const jsdouble RNG_DSCALE = (1LL << 53);
-
-/*
- * Math.random() support, lifted from java.util.Random.java.
- */
-static inline void
-random_setSeed(JSContext *cx, int64 seed)
-{
-    cx->rngSeed = (seed ^ RNG_MULTIPLIER) & RNG_MASK;
-}
-
-void
-js_InitRandom(JSContext *cx)
-{
-    /*
-     * Set the seed from current time. Since we have a RNG per context and we often bring
-     * up several contexts at the same time, we xor in some additional values, namely
-     * the context and its successor. We don't just use the context because it might be
-     * possible to reverse engineer the context pointer if one guesses the time right.
-     */
-    random_setSeed(cx,
-                   (PRMJ_Now() / 1000) ^
-                   (int64)(cx) ^
-                   (int64)(cx->links.next));
-}
-
-static inline uint64
-random_next(JSContext *cx, int bits)
-{
-    uint64 nextseed = cx->rngSeed * RNG_MULTIPLIER;
-    nextseed += RNG_ADDEND;
-    nextseed &= RNG_MASK;
-    cx->rngSeed = nextseed;
-    return nextseed >> (48 - bits);
-}
-
-static inline jsdouble
-random_nextDouble(JSContext *cx)
-{
-    return (jsdouble)((random_next(cx, 26) << 27) + random_next(cx, 27)) / RNG_DSCALE;
-}
-
-static JSBool
-math_random(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble z = random_nextDouble(cx);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-#if defined _WIN32 && !defined WINCE && _MSC_VER < 1400
-/* Try to work around apparent _copysign bustage in VC6 and VC7. */
-double
-js_copysign(double x, double y)
-{
-    jsdpun xu, yu;
-
-    xu.d = x;
-    yu.d = y;
-    xu.s.hi &= ~JSDOUBLE_HI32_SIGNBIT;
-    xu.s.hi |= yu.s.hi & JSDOUBLE_HI32_SIGNBIT;
-    return xu.d;
-}
-#endif
-
-static JSBool
-math_round(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_copysign(fd_floor(x + 0.5), x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_sin(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_sin(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_sqrt(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_sqrt(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-static JSBool
-math_tan(JSContext *cx, uintN argc, jsval *vp)
-{
-    jsdouble x, z;
-
-    x = js_ValueToNumber(cx, &vp[2]);
-    if (JSVAL_IS_NULL(vp[2]))
-        return JS_FALSE;
-    z = fd_tan(x);
-    return js_NewNumberInRootedValue(cx, z, vp);
-}
-
-#if JS_HAS_TOSOURCE
-static JSBool
-math_toSource(JSContext *cx, uintN argc, jsval *vp)
-{
-    *vp = ATOM_KEY(CLASS_ATOM(cx, Math));
-    return JS_TRUE;
-}
-#endif
-
-static JSFunctionSpec math_static_methods[] = {
-#if JS_HAS_TOSOURCE
-    JS_FN(js_toSource_str,  math_toSource,      0, 0, 0),
-#endif
-    JS_FN("abs",            math_abs,           1, 1, 0),
-    JS_FN("acos",           math_acos,          1, 1, 0),
-    JS_FN("asin",           math_asin,          1, 1, 0),
-    JS_FN("atan",           math_atan,          1, 1, 0),
-    JS_FN("atan2",          math_atan2,         2, 2, 0),
-    JS_FN("ceil",           math_ceil,          1, 1, 0),
-    JS_FN("cos",            math_cos,           1, 1, 0),
-    JS_FN("exp",            math_exp,           1, 1, 0),
-    JS_FN("floor",          math_floor,         1, 1, 0),
-    JS_FN("log",            math_log,           1, 1, 0),
-    JS_FN("max",            math_max,           0, 2, 0),
-    JS_FN("min",            math_min,           0, 2, 0),
-    JS_FN("pow",            math_pow,           2, 2, 0),
-    JS_FN("random",         math_random,        0, 0, 0),
-    JS_FN("round",          math_round,         1, 1, 0),
-    JS_FN("sin",            math_sin,           1, 1, 0),
-    JS_FN("sqrt",           math_sqrt,          1, 1, 0),
-    JS_FN("tan",            math_tan,           1, 1, 0),
-    JS_FS_END
-};
-
-JSObject *
-js_InitMathClass(JSContext *cx, JSObject *obj)
-{
-    JSObject *Math;
-
-    Math = JS_DefineObject(cx, obj, js_Math_str, &js_MathClass, NULL, 0);
-    if (!Math)
-        return NULL;
-    if (!JS_DefineFunctions(cx, Math, math_static_methods))
-        return NULL;
-    if (!JS_DefineConstDoubles(cx, Math, math_constants))
-        return NULL;
-    return Math;
-}

mozilla/js/src/jsmath.h

@@ -1,60 +0,0 @@
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Communicator client code, released
- * March 31, 1998.
- *
- * The Initial Developer of the Original Code is
- * Netscape Communications Corporation.
- * Portions created by the Initial Developer are Copyright (C) 1998-1999
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either of the GNU General Public License Version 2 or later (the "GPL"),
- * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-/* -*- Mode: C; tab-width: 8 -*-
- * Copyright (C) 1998-1999 Netscape Communications Corporation, All Rights Reserved.
- */
-
-#ifndef jsmath_h___
-#define jsmath_h___
-/*
- * JS math functions.
- */
-
-JS_BEGIN_EXTERN_C
-
-extern JSClass js_MathClass;
-
-extern JSObject *
-js_InitMathClass(JSContext *cx, JSObject *obj);
-
-extern void
-js_InitRandom(JSContext *cx);
-
-JS_END_EXTERN_C
-
-#endif /* jsmath_h___ */

mozilla/tools/tinderbox-configs/firefox/macosx/CLOBBER

@@ -0,0 +1,6 @@
+# List clobbering rationale in this file. Please include bug numbers whenever possible.
+- 20070619: and now libxul is back on again
+- 20070618: clobbering for bug 345517 (enable libxul), after it was backed out for Mac
+- 20070612: clobbering for bug 345517 (enable libxul). Again, after fixing mozconfig
+- 20070612: clobbering for bug 345517 (enable libxul)
+- 20070529: CLOBBER to get symbols uploaded for the first time

mozilla/tools/tinderbox-configs/firefox/macosx/mozconfig

@@ -0,0 +1,26 @@
+#
+## hostname: bm-xservex11.build.mozilla.org
+## uname: Darwin bm-xserve11.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
+#
+
+. $topsrcdir/build/macosx/universal/mozconfig
+
+mk_add_options MOZ_MAKE_FLAGS="-j4"
+mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging mozilla/tools/codesighs"
+mk_add_options MOZ_CO_PROJECT="browser"
+mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/../build/universal
+mk_add_options MOZ_MAKE_FLAGS="MOZ_ENABLE_NEW_TEXT_FRAME=1"
+
+ac_add_options --enable-application=browser
+ac_add_options --enable-update-channel=nightly
+ac_add_options --enable-optimize="-O2 -g"
+ac_add_options --disable-debug
+ac_add_options --disable-tests
+ac_add_options --enable-update-packaging
+
+# ac_add_options --enable-official-branding
+ac_add_app_options ppc --enable-prebinding
+ac_add_options --enable-svg
+ac_add_options --enable-canvas
+
+ac_add_options --enable-codesighs

mozilla/tools/tinderbox-configs/firefox/macosx/tinder-config.pl

@@ -0,0 +1,257 @@
+#
+## hostname: bm-xservex11.build.mozilla.org
+## uname: Darwin bm-xserve11.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$ENV{NO_EM_RESTART} = "1";
+$ENV{DYLD_NO_FIX_PREBINDING} = "1";
+$ENV{LD_PREBIND_ALLOW_OVERLAP} = "1";
+$ENV{CVS_RSH} = "ssh";
+
+$MacUniversalBinary = 1;
+
+# $ENV{MOZ_PACKAGE_MSI}
+#-----------------------------------------------------------------------------
+#  Default: 0
+#   Values: 0 | 1
+#  Purpose: Controls whether a MSI package is made.
+# Requires: Windows and a local MakeMSI installation.
+#$ENV{MOZ_PACKAGE_MSI} = 0;
+
+# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
+#-----------------------------------------------------------------------------
+#  Default: scp
+#   Values: scp | rsync
+#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
+# Requires: The selected type requires the command be available both locally
+#           and on the Talkback server.
+#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+$BuildAdministrator = 'build@mozilla.org';
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+#$BuildDepend       = 1;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+#$BuildLocales      = 0;      # Do l10n packaging?
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = 'Minefield';
+$VendorName               = "";
+
+$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
+$RegxpcomTest             = 1;
+$AliveTest                = 1;
+#$JavaTest                 = 0;
+#$ViewerTest               = 0;
+#$BloatTest                = 0;  # warren memory bloat test
+#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+#$DomToTextConversionTest  = 0;  
+#$XpcomGlueTest            = 0;
+$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+#$MailBloatTest            = 0;
+#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+$LayoutPerformanceTest    = 1;  # Tp
+$LayoutPerformanceLocalTest   = 0;  # Tp2
+$DHTMLPerformanceTest     = 1;  # Tdhtml
+#$QATest                   = 0;  
+$XULWindowOpenTest        = 1;  # Txul
+$StartupPerformanceTest   = 1;  # Ts
+
+$TestsPhoneHome           = 1;  # Should test report back to server?
+
+$GraphNameOverride        = 'xserve11.build.mozilla.org_TextFrame';
+
+# $results_server
+#----------------------------------------------------------------------------
+# Server on which test results will be accessible.  This was originally tegu,
+# then became axolotl.  Once we moved services from axolotl, it was time
+# to give this service its own hostname to make future transitions easier.
+# - cmp@mozilla.org
+#$results_server           = "build-graphs.mozilla.org";
+
+#$pageload_server          = "spider";  # localhost
+$pageload_server          = "pageload.build.mozilla.org";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 120;
+
+$AliveTestTimeout                 = 10;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
+#$LayoutPerformanceLocalTestTimeout     = 1200;  # entire test, seconds
+#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 15;    # seconds
+#$XULWindowOpenTestTimeout	      = 150;   # seconds
+
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+#$Make          = 'gmake';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+#$blat           = 'c:/nstools/bin/blat';
+#$use_blat       = 0;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+#$moz_cvsroot   = $ENV{CVSROOT};
+$moz_cvsroot   = ":ext:cltbld\@cvs.mozilla.org:/cvsroot";
+#$moz_cvsroot   = "/builds/cvs.hourly/cvsroot";
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+$ObjDir = '../build/universal';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'TextFrame';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+$BuildTree  = 'MozillaExperimental';
+
+#$BuildName = '';
+#$BuildTag = '';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'firefox-bin';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# Release build options
+$ReleaseBuild  = 1;
+$shiptalkback  = 0;
+#$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
+#$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
+$build_hour    = "4";
+$package_creation_path = "/browser/installer";
+# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
+$mac_bundle_path = "/browser/app";
+$ssh_version   = "2";
+#$ssh_user      = "cltbld";
+#$ssh_server    = "stage.mozilla.org";
+$ftp_path      = "/home/ftp/pub/firefox/nightly/experimental/textframe";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/experimental/textframe";
+$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
+$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
+$milestone     = "trunk";
+$notify_list   = "build-announce\@mozilla.org";
+$stub_installer = 0;
+$sea_installer = 0;
+$archive       = 1;
+#$push_raw_xpis = 1;
+$update_package = 1;
+$update_product = "Firefox";
+$update_version = "trunk";
+$update_platform = "Darwin_Universal-gcc3";
+$update_hash = "md5";
+$update_filehost = "ftp.mozilla.org";
+$update_ver_file = 'browser/config/version.txt';
+$update_pushinfo = 0;
+$crashreporter_buildsymbols = 0;
+$crashreporter_pushsymbols = 0;
+$ENV{SYMBOL_SERVER_HOST} = 'stage.mozilla.org';
+$ENV{SYMBOL_SERVER_USER}   = 'ffxbld';
+$ENV{SYMBOL_SERVER_PATH}   = '/mnt/netapp/breakpad/symbols_ffx/';
+$ENV{SYMBOL_SERVER_SSH_KEY}   = "$ENV{HOME}/.ssh/ffxbld_dsa";
+$ENV{MOZ_SYMBOLS_EXTRA_BUILDID} = 'textframe';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = '';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = '';
+
+# Prevent Extension Manager from spawning child processes during tests
+# - processes that tbox scripts cannot kill. 
+#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/firefox/win32/CLOBBER

@@ -0,0 +1,5 @@
+# List clobbering rationale in this file. Please include bug numbers whenever possible.
+- 2007/06/12: clobbering for bug 345517 (enable libxul). Again, after fixing mozconfig
+- 2007/06/12: clobbering for bug 345517 (enable libxul)
+- 2007/05/28: clobbering for bug 382141 to get symbols uploaded
+- 2007/05/22: clobbering a win32 trunk build to test aus2 migration (see http://wiki.mozilla.org/WeeklyUpdates/2007-05-21#Build and http://weblogs.mozillazine.org/preed/2007/05/aus2s_a_movin_can_you_help_us.html)

mozilla/tools/tinderbox-configs/firefox/win32/mozconfig

@@ -0,0 +1,24 @@
+#
+## hostname: fxexp-win32-tbox
+## uname: CYGWIN_NT-5.2 fx-win32-tbox 1.5.19(0.150/4/2) 2006-01-20 13:28 i686 Cygwin
+#
+
+# . $topsrcdir/browser/config/mozconfig
+
+mk_add_options MOZ_CO_PROJECT=browser
+mk_add_options MOZ_MAKE_FLAGS="-j5"
+mk_add_options MOZ_MAKE_FLAGS="MOZ_ENABLE_NEW_TEXT_FRAME=1"
+mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
+mk_add_options MOZ_PACKAGE_NSIS=1
+
+ac_add_options --enable-application=browser
+ac_add_options --enable-update-channel=nightly
+ac_add_options --enable-optimize
+ac_add_options --disable-debug
+# ac_add_options --enable-codesighs
+ac_add_options --disable-tests
+# ac_add_options --enable-official-branding
+ac_add_options --enable-svg
+ac_add_options --enable-canvas
+ac_add_options --enable-default-toolkit=cairo-windows
+ac_add_options --enable-update-packaging

mozilla/tools/tinderbox-configs/firefox/win32/tinder-config.pl

@@ -0,0 +1,253 @@
+#
+## hostname: fx-win32-tbox
+## uname: CYGWIN_NT-5.2 fx-win32-tbox 1.5.19(0.150/4/2) 2006-01-20 13:28 i686 Cygwin
+#
+
+#- tinder-config.pl - Tinderbox configuration file.
+#-    Uncomment the variables you need to set.
+#-    The default values are the same as the commented variables.
+
+$ENV{MOZ_INSTALLER_USE_7ZIP} = '1';
+$ENV{NO_EM_RESTART} = '1';
+$ENV{MOZ_PACKAGE_NSIS} = '1';
+
+# $ENV{MOZ_PACKAGE_MSI}
+#-----------------------------------------------------------------------------
+#  Default: 0
+#   Values: 0 | 1
+#  Purpose: Controls whether a MSI package is made.
+# Requires: Windows and a local MakeMSI installation.
+#$ENV{MOZ_PACKAGE_MSI} = 0;
+
+# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
+#-----------------------------------------------------------------------------
+#  Default: scp
+#   Values: scp | rsync
+#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
+# Requires: The selected type requires the command be available both locally
+#           and on the Talkback server.
+#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
+
+#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
+$BuildAdministrator = 'build@mozilla.org';
+#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
+#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
+
+#- You'll need to change these to suit your machine's needs
+#$DisplayServer = ':0.0';
+
+#- Default values of command-line opts
+#-
+#$BuildDepend       = 1;      # Depend or Clobber
+#$BuildDebug        = 0;      # Debug or Opt (Darwin)
+#$ReportStatus      = 1;      # Send results to server, or not
+#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
+#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
+#$BuildOnce         = 0;      # Build once, don't send results to server
+#$TestOnly          = 0;      # Only run tests, don't pull/build
+#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
+#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
+#$BuildLocales      = 0;      # Do l10n packaging?
+
+# Tests
+$CleanProfile             = 1;
+#$ResetHomeDirForTests     = 1;
+$ProductName              = "Firefox";
+$VendorName               = "Mozilla";
+
+$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
+$RegxpcomTest             = 1;
+$AliveTest                = 1;
+$JavaTest                 = 0;
+$ViewerTest               = 0;
+$BloatTest                = 0;  # warren memory bloat test
+$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
+$DomToTextConversionTest  = 0;  
+$XpcomGlueTest            = 0;
+$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
+$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
+$MailBloatTest            = 0;
+$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
+$LayoutPerformanceTest    = 0;  # Tp
+$DHTMLPerformanceTest     = 0;  # Tdhtml
+$QATest                   = 0;  
+$XULWindowOpenTest        = 0;  # Txul
+$StartupPerformanceTest   = 0;  # Ts
+$NeckoUnitTest            = 0;
+$RenderPerformanceTest    = 0;  # Tgfx
+
+$TestsPhoneHome           = 0;  # Should test report back to server?
+$GraphNameOverride        = 'fx-win32-tbox';
+
+# $results_server
+#----------------------------------------------------------------------------
+# Server on which test results will be accessible.  This was originally tegu,
+# then became axolotl.  Once we moved services from axolotl, it was time
+# to give this service its own hostname to make future transitions easier.
+# - cmp@mozilla.org
+#$results_server           = "build-graphs.mozilla.org";
+
+$pageload_server          = "pageload.build.mozilla.org";  # localhost
+
+#
+# Timeouts, values are in seconds.
+#
+#$CVSCheckoutTimeout               = 3600;
+#$CreateProfileTimeout             = 45;
+#$RegxpcomTestTimeout              = 120;
+
+#$AliveTestTimeout                 = 30;
+#$ViewerTestTimeout                = 45;
+#$EmbedTestTimeout                 = 45;
+#$BloatTestTimeout                 = 120;   # seconds
+#$MailBloatTestTimeout             = 120;   # seconds
+#$JavaTestTimeout                  = 45;
+#$DomTestTimeout	                  = 45;    # seconds
+#$XpcomGlueTestTimeout             = 15;
+#$CodesizeTestTimeout              = 900;     # seconds
+#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
+$LayoutPerformanceTestTimeout     = 800;  # entire test, seconds
+#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
+#$QATestTimeout                    = 1200;   # entire test, seconds
+#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
+#$StartupPerformanceTestTimeout    = 20;    # seconds
+#$XULWindowOpenTestTimeout	      = 90;   # seconds
+#$NeckoUnitTestTimeout             = 30;    # seconds
+$RenderPerformanceTestTimeout     = 1800;  # seconds
+
+#$MozConfigFileName = 'mozconfig';
+
+#$UseMozillaProfile = 1;
+#$MozProfileName = 'default';
+
+#- Set these to what makes sense for your system
+$Make          = 'make';       # Must be GNU make
+#$MakeOverrides = '';
+#$mail          = '/bin/mail';
+#$CVS           = 'cvs -q';
+#$CVSCO         = 'checkout -P';
+
+# win32 usually doesn't have /bin/mail
+$blat           = 'd:/moztools/bin/blat';
+$use_blat       = 0;
+
+# Set moz_cvsroot to something like:
+# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
+# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
+#
+# Note that win32 may not need \@, depends on ' or ".
+# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
+
+#$moz_cvsroot   = $ENV{CVSROOT};
+$moz_cvsroot = ':ext:cltbld@cvs.mozilla.org:/cvsroot';
+
+#- Set these proper values for your tinderbox server
+#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
+
+# Allow for non-client builds, e.g. camino.
+#$moz_client_mk = 'client.mk';
+
+#- Set if you want to build in a separate object tree
+#XXX: this breaks talkback currently
+#$ObjDir = 'fx-trunk';
+
+# Extra build name, if needed.
+$BuildNameExtra = 'TextFrame';
+
+# User comment, eg. ip address for dhcp builds.
+# ex: $UserComment = "ip = 208.12.36.108";
+#$UserComment = 0;
+
+#-
+#- The rest should not need to be changed
+#-
+
+#- Minimum wait period from start of build to start of next build in minutes.
+#$BuildSleep = 10;
+
+#- Until you get the script working. When it works,
+#- change to the tree you're actually building
+#$BuildTree  = 'MozillaTest';
+$BuildTree  = 'MozillaExperimental';
+
+#$BuildName = '';
+#$BuildTag = '';
+#$BuildConfigDir = 'mozilla/config';
+#$Topsrcdir = 'mozilla';
+
+$BinaryName = 'firefox.exe';
+
+#
+# For embedding app, use:
+#$EmbedBinaryName = 'TestGtkEmbed';
+#$EmbedDistDir    = 'dist/bin'
+
+
+#$ShellOverride = ''; # Only used if the default shell is too stupid
+#$ConfigureArgs = '';
+#$ConfigureEnvArgs = '';
+#$Compiler = 'gcc';
+#$NSPRArgs = '';
+#$ShellOverride = '';
+
+# Release build options
+$ReleaseBuild  = 1;
+$shiptalkback  = 0;
+$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
+$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
+$build_hour    = "7";
+$package_creation_path = "/browser/installer";
+# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
+$ssh_version   = "2";
+#$ssh_user      = "cltbld";
+#$ssh_server    = "stage.mozilla.org";
+$ftp_path      = "/home/ftp/pub/firefox/nightly/experimental/textframe";
+$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/experimental/textframe";
+$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
+$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
+$milestone     = "trunk";
+$notify_list   = 'build-announce@mozilla.org';
+$stub_installer = 0;
+$sea_installer = 1;
+$archive       = 1;
+$push_raw_xpis = 1;
+$update_package = 1;
+$update_product = "Firefox";
+$update_version = "trunk";
+$update_platform = "WINNT_x86-msvc";
+$update_hash = "sha1";
+$update_filehost = "ftp.mozilla.org";
+$update_ver_file = 'browser/config/version.txt';
+$update_pushinfo = 0;
+$crashreporter_buildsymbols = 0;
+$crashreporter_pushsymbols = 0;
+$ENV{SYMBOL_SERVER_HOST} = 'stage.mozilla.org';
+$ENV{SYMBOL_SERVER_USER}   = 'ffxbld';
+$ENV{SYMBOL_SERVER_PATH}   = '/mnt/netapp/breakpad/symbols_ffx/';
+$ENV{SYMBOL_SERVER_SSH_KEY}   = "$ENV{HOME}/.ssh/ffxbld_dsa";
+$ENV{MOZ_SYMBOLS_EXTRA_BUILDID} = 'textframe';
+
+# Reboot the OS at the end of build-and-test cycle. This is primarily
+# intended for Win9x, which can't last more than a few cycles before
+# locking up (and testing would be suspect even after a couple of cycles).
+# Right now, there is only code to force the reboot for Win9x, so even
+# setting this to 1, will not have an effect on other platforms. Setting
+# up win9x to automatically logon and begin running tinderbox is left 
+# as an exercise to the reader. 
+#$RebootSystem = 0;
+
+# LogCompression specifies the type of compression used on the log file.
+# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
+# for 'gzip' or 'bzip2' are in the user's path before setting this
+# option.
+#$LogCompression = '';
+
+# LogEncoding specifies the encoding format used for the logs. Valid
+# options are 'base64', and 'uuencode'. If $LogCompression is set above,
+# this needs to be set to 'base64' or 'uuencode' to ensure that the
+# binary data is transferred properly.
+#$LogEncoding = '';
+
+# Prevent Extension Manager from spawning child processes during tests
+# - processes that tbox scripts cannot kill. 
+#$ENV{NO_EM_RESTART} = '1';