This commit was manufactured by cvs2svn to create tag 'NSS_C'.

git-svn-id: svn://10.0.0.236/tags/NSS_C@114609 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/security/coreconf/AIX.mk

@@ -0,0 +1,84 @@
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+# 
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+# 
+# The Original Code is the Netscape security libraries.
+# 
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are 
+# Copyright (C) 1994-2000 Netscape Communications Corporation.  All
+# Rights Reserved.
+# 
+# Contributor(s):
+# 
+# Alternatively, the contents of this file may be used under the
+# terms of the GNU General Public License Version 2 or later (the
+# "GPL"), in which case the provisions of the GPL are applicable 
+# instead of those above.  If you wish to allow use of your 
+# version of this file only under the terms of the GPL and not to
+# allow others to use your version of this file under the MPL,
+# indicate your decision by deleting the provisions above and
+# replace them with the notice and other provisions required by
+# the GPL.  If you do not delete the provisions above, a recipient
+# may use your version of this file under either the MPL or the
+# GPL.
+#
+# Config stuff for AIX.
+#
+include $(CORE_DEPTH)/coreconf/UNIX.mk
+
+#
+# There are two implementation strategies available on AIX:
+# pthreads, and pthreads-user.  The default is pthreads.
+# In both strategies, we need to use pthread_user.c, instead of
+# aix.c.  The fact that aix.c is never used is somewhat strange.
+# 
+# So we need to do the following:
+# - Default (PTHREADS_USER not defined in the environment or on
+#   the command line):
+#   Set PTHREADS_USER=1, USE_PTHREADS=1
+# - PTHREADS_USER=1 set in the environment or on the command line:
+#   Do nothing.
+#
+ifeq ($(PTHREADS_USER),1)
+	USE_PTHREADS =            # just to be safe
+	IMPL_STRATEGY = _PTH_USER
+else
+	USE_PTHREADS = 1
+	PTHREADS_USER = 1
+endif
+
+DEFAULT_COMPILER = xlC_r
+
+CC		= xlC_r
+CCC		= xlC_r
+
+CPU_ARCH	= rs6000
+
+RANLIB		= ranlib
+
+OS_CFLAGS	= -DAIX -DSYSV
+ifeq ($(CC),xlC_r)
+	OS_CFLAGS += -qarch=com
+endif
+
+AIX_WRAP	= $(DIST)/lib/aixwrap.o
+AIX_TMP		= $(OBJDIR)/_aix_tmp.o
+OS_LIBS		+= -lsvld
+ifdef MAPFILE
+EXPORT_RULES = -bexport:$(MAPFILE)
+endif
+PROCESS_MAP_FILE = grep -v ';+' $(LIBRARY_NAME).def | grep -v ';-' | \
+                sed -e 's; DATA ;;' -e 's,;;,,' -e 's,;.*,,' > $@
+
+ifdef BUILD_OPT
+        OPTIMIZER += -qmaxmem=-1
+endif
+

mozilla/security/coreconf/AIX3.2.mk

@@ -0,0 +1,35 @@
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+# 
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+# 
+# The Original Code is the Netscape security libraries.
+# 
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are 
+# Copyright (C) 1994-2000 Netscape Communications Corporation.  All
+# Rights Reserved.
+# 
+# Contributor(s):
+# 
+# Alternatively, the contents of this file may be used under the
+# terms of the GNU General Public License Version 2 or later (the
+# "GPL"), in which case the provisions of the GPL are applicable 
+# instead of those above.  If you wish to allow use of your 
+# version of this file only under the terms of the GPL and not to
+# allow others to use your version of this file under the MPL,
+# indicate your decision by deleting the provisions above and
+# replace them with the notice and other provisions required by
+# the GPL.  If you do not delete the provisions above, a recipient
+# may use your version of this file under either the MPL or the
+# GPL.
+#
+# Config stuff for AIX3.2.5
+#
+include $(CORE_DEPTH)/coreconf/AIX.mk

mozilla/security/coreconf/AIX4.1.mk

@@ -0,0 +1,55 @@
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+# 
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+# 
+# The Original Code is the Netscape security libraries.
+# 
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are 
+# Copyright (C) 1994-2000 Netscape Communications Corporation.  All
+# Rights Reserved.
+# 
+# Contributor(s):
+# 
+# Alternatively, the contents of this file may be used under the
+# terms of the GNU General Public License Version 2 or later (the
+# "GPL"), in which case the provisions of the GPL are applicable 
+# instead of those above.  If you wish to allow use of your 
+# version of this file only under the terms of the GPL and not to
+# allow others to use your version of this file under the MPL,
+# indicate your decision by deleting the provisions above and
+# replace them with the notice and other provisions required by
+# the GPL.  If you do not delete the provisions above, a recipient
+# may use your version of this file under either the MPL or the
+# GPL.
+#
+# Config stuff for AIX4.1
+#
+
+include $(CORE_DEPTH)/coreconf/AIX.mk
+
+
+AIX_LINK_OPTS  += -bnso -berok
+#AIX_LINK_OPTS += -bnso -berok -brename:.select,.wrap_select -brename:.poll,.wrap_poll -bI:/usr/lib/syscalls.exp
+
+# The AIX4.1 linker had a bug which always looked for a dynamic library
+# with an extension of .a.  AIX4.2 fixed this problem
+DLL_SUFFIX = a
+
+OS_LIBS		+= -lsvld
+
+# override default value set in suffix.mk, for AIX 4.1 only
+DYNAMIC_LIB_EXTENSION = _shr
+
+# override default value in ruleset.mk
+ifdef LIBRARY_NAME
+    SHARED_LIBRARY = $(OBJDIR)/lib$(LIBRARY_NAME)$(LIBRARY_VERSION)_shr$(JDK_DEBUG_SUFFIX).a
+endif
+

mozilla/tools/tinderbox-configs/firefox/linux/mozconfig

@@ -1,26 +0,0 @@
-#
-## hostname: fx-linux-tbox
-## uname: Linux fx-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
-#
-
-export CFLAGS="-gstabs+"
-export CXXFLAGS="-gstabs+"
-
-mk_add_options MOZ_CO_PROJECT=browser
-mk_add_options PROFILE_GEN_SCRIPT=@TOPSRCDIR@/build/profile_pageloader.pl
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
-mk_add_options MOZ_MAKE_FLAGS="-j1"
-
-ac_add_options --enable-application=browser
-ac_add_options --enable-update-channel=release
-ac_add_options --enable-update-packaging
-
-# Don't add explicit optimize flags here, set them in configure.in, see bug 407794.
-ac_add_options --enable-optimize
-ac_add_options --disable-debug
-ac_add_options --disable-tests
-
-ac_add_options --enable-official-branding
-
-CC=/tools/gcc/bin/gcc
-CXX=/tools/gcc/bin/g++

mozilla/tools/tinderbox-configs/firefox/linux/tinder-config.pl

@@ -1,268 +0,0 @@
-#
-## hostname: fx-linux-tbox
-## uname: Linux fx-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{CVS_RSH} = "ssh";
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-
-# To ensure Talkback client builds properly on some Linux boxen where LANG
-# is set to "en_US.UTF-8" by default, override that setting here by setting
-# it to "en_US.iso885915" (the setting on ocean).  Proper fix is to update
-# where xrestool is called in the build system so that 'LANG=C' in its
-# environment, according to bryner.
-$ENV{LANG} = "en_US.iso885915";
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "Firefox";
-$VendorName               = 'Mozilla';
-
-$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
-$RegxpcomTest             = 1;
-$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-$LayoutPerformanceTest    = 0;  # Tp
-$DHTMLPerformanceTest     = 0;  # Tdhtml
-#$QATest                   = 0;  
-#$XULWindowOpenTest        = 0;  # Txul
-$StartupPerformanceTest   = 0;  # Ts
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-$GraphNameOverride        = 'fx-linux-tbox';
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-#$pageload_server          = "spider";  # localhost
-$pageload_server      = "pageload.build.mozilla.org";
-
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 45;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 15;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-#$Make          = 'gmake';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-#$blat           = 'c:/nstools/bin/blat';
-#$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-#$moz_cvsroot   = $ENV{CVSROOT};
-# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
-$moz_cvsroot   = 'cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = 'obj-fx-trunk';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Release';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaRelease';
-
-#$BuildName = '';
-# CONFIG: $BuildTag = '%productTag%_RELEASE';
-$BuildTag = 'FIREFOX_3_0_19_RELEASE';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'firefox-bin';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = 4;
-$package_creation_path = "/browser/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "cltbld";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-$ftp_path      = "/home/ftp/pub/firefox/nightly";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly";
-$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
-# CONFIG: $milestone     = "firefox%version%";
-$milestone     = "firefox3.0.19";
-$notify_list   = 'build-announce@mozilla.org';
-$stub_installer = 0;
-$sea_installer = 0;
-$archive       = 1;
-$push_raw_xpis = 0;
-$update_pushinfo = 0;
-$update_package = 1;
-$update_product = "Firefox";
-$update_version = "trunk";
-$update_platform = "Linux_x86-gcc3";
-$update_hash = "sha1";
-$update_filehost = 'ftp.mozilla.org';
-$update_ver_file = 'browser/config/version.txt';
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'ffxbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_ffx';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/home/cltbld/.ssh/ffxbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';
-
-# Do not build XForms
-$BuildXForms = 0;

mozilla/tools/tinderbox-configs/firefox/macosx/mozconfig

@@ -1,26 +0,0 @@
-#
-## hostname: bm-xserve08.build.mozilla.org
-## uname: Darwin bm-xserve08.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
-#
-
-# symbols for breakpad
-export CFLAGS="-g -gfull"
-export CXXFLAGS="-g -gfull"
-
-. $topsrcdir/build/macosx/universal/mozconfig
-
-mk_add_options MOZ_MAKE_FLAGS="-j1"
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
-mk_add_options MOZ_CO_PROJECT="browser"
-mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/../build/universal
-
-ac_add_options --enable-application=browser
-ac_add_options --enable-update-channel=release
-# Don't add explicit optimize flags here, set them in configure.in, see bug 407794.
-ac_add_options --enable-optimize
-ac_add_options --disable-debug
-ac_add_options --disable-tests
-ac_add_options --enable-update-packaging
-
-ac_add_options --enable-official-branding
-ac_add_app_options ppc --enable-prebinding

mozilla/tools/tinderbox-configs/firefox/macosx/tinder-config.pl

@@ -1,267 +0,0 @@
-#
-## hostname: bm-xserve08.build.mozilla.org
-## uname: Darwin bm-xserve08.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{NO_EM_RESTART} = "1";
-$ENV{DYLD_NO_FIX_PREBINDING} = "1";
-$ENV{LD_PREBIND_ALLOW_OVERLAP} = "1";
-$ENV{CVS_RSH} = "ssh";
-
-$MacUniversalBinary = 1;
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = 'Firefox';
-$VendorName               = "Mozilla";
-
-$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
-$RegxpcomTest             = 1;
-$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-$LayoutPerformanceTest    = 0;  # Tp
-$LayoutPerformanceLocalTest   = 0;  # Tp2
-$DHTMLPerformanceTest     = 0;  # Tdhtml
-#$QATest                   = 0;  
-$XULWindowOpenTest        = 0;  # Txul
-$StartupPerformanceTest   = 0;  # Ts
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-
-$GraphNameOverride        = 'xserve08.build.mozilla.org_Fx-Trunk';
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-#$pageload_server          = "spider";  # localhost
-$pageload_server          = "pageload.build.mozilla.org";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-$AliveTestTimeout                 = 10;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-$LayoutPerformanceTestTimeout     = 300;  # entire test, seconds
-$LayoutPerformanceLocalTestTimeout     = 180;  # entire test, seconds
-$DHTMLPerformanceTestTimeout      = 180;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 15;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-#$Make          = 'gmake';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-#$blat           = 'c:/nstools/bin/blat';
-#$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
-$moz_cvsroot   = 'cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = '../build/universal';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Release';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaRelease';
-
-#$BuildName = '';
-# CONFIG: $BuildTag = '%productTag%_RELEASE';
-$BuildTag = 'FIREFOX_3_0_19_RELEASE';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'firefox-bin';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = "4";
-$package_creation_path = "/browser/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "cltbld";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-$ftp_path      = "/home/ftp/pub/firefox/nightly";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly";
-$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
-# CONFIG: $milestone     = 'firefox%version%';
-$milestone     = 'firefox3.0.19';
-$notify_list   = "build-announce\@mozilla.org";
-$stub_installer = 0;
-$sea_installer = 0;
-$archive       = 1;
-$push_raw_xpis = 0;
-$update_package = 1;
-$update_product = "Firefox";
-$update_version = "trunk";
-$update_platform = "Darwin_Universal-gcc3";
-$update_hash = "sha1";
-$update_filehost = "ftp.mozilla.org";
-$update_ver_file = 'browser/config/version.txt';
-$update_pushinfo = 0;
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'ffxbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_ffx';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/Users/cltbld/.ssh/ffxbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';
-
-# Do not build XForms
-$BuildXForms = 0;

mozilla/tools/tinderbox-configs/firefox/win32/mozconfig

@@ -1,22 +0,0 @@
-#
-## hostname: fx-win32-tbox
-## uname: MINGW32_NT-5.2 FX-WIN32-TBOX 1.0.11(0.46/3/2) 2007-01-12 12:05 i686 Msys
-#
-export CFLAGS="-GL -wd4624 -wd4952"
-export CXXFLAGS="-GL -wd4624 -wd4952"
-export LDFLAGS="-LTCG"
-
-mk_add_options MOZ_CO_PROJECT=browser
-mk_add_options MOZ_MAKE_FLAGS="-j1"
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
-mk_add_options PROFILE_GEN_SCRIPT='$(PYTHON) $(MOZ_OBJDIR)/_profile/pgo/profileserver.py'
-
-ac_add_options --enable-application=browser
-ac_add_options --enable-update-channel=release
-ac_add_options --enable-optimize
-ac_add_options --disable-debug
-ac_add_options --disable-tests
-ac_add_options --enable-update-packaging
-ac_add_options --enable-official-branding
-ac_add_options --enable-jemalloc
-ac_add_options --with-crashreporter-enable-percent=10

mozilla/tools/tinderbox-configs/firefox/win32/tinder-config.pl

@@ -1,267 +0,0 @@
-#
-## hostname: fx-win32-tbox
-## uname: MINGW32_NT-5.2 FX-WIN32-TBOX 1.0.11(0.46/3/2) 2007-01-12 12:05 i686 Msys
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{NO_EM_RESTART} = '1';
-$ENV{CVS_RSH} = "ssh";
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-# Both these two variables are for source server support
-$ENV{PDBSTR_PATH} = 'C:\\Program Files\\Debugging Tools for Windows\\sdk\\srcsrv\\pdbstr.exe';
-$ENV{SRCSRV_ROOT} = ':pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot';
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "Firefox";
-$VendorName               = "Mozilla";
-
-$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
-$RegxpcomTest             = 1;
-$AliveTest                = 1;
-$JavaTest                 = 0;
-$ViewerTest               = 0;
-$BloatTest                = 0;  # warren memory bloat test
-$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-$DomToTextConversionTest  = 0;  
-$XpcomGlueTest            = 0;
-$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-$MailBloatTest            = 0;
-$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-$LayoutPerformanceTest    = 0;  # Tp
-$DHTMLPerformanceTest     = 0;  # Tdhtml
-$QATest                   = 0;  
-$XULWindowOpenTest        = 0;  # Txul
-$StartupPerformanceTest   = 0;  # Ts
-$NeckoUnitTest            = 0;
-$RenderPerformanceTest    = 0;  # Tgfx
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-$GraphNameOverride        = 'fx-win32-tbox';
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-$pageload_server          = "pageload.build.mozilla.org";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 30;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-$LayoutPerformanceTestTimeout     = 800;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 20;    # seconds
-#$XULWindowOpenTestTimeout	      = 90;   # seconds
-#$NeckoUnitTestTimeout             = 30;    # seconds
-$RenderPerformanceTestTimeout     = 1800;  # seconds
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-$Make          = 'make';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-$blat           = '/d/mozilla-build/blat261/full/blat';
-#$use_blat       = 1;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-# CONFIG: $moz_cvsroot = '%mozillaCvsroot%';
-$moz_cvsroot = 'cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = 'obj-fx-trunk';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Release';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-#$BuildTree  = 'MozillaTest';
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaRelease';
-
-#$BuildName = '';
-# CONFIG: $BuildTag = '%productTag%_RELEASE';
-$BuildTag = 'FIREFOX_3_0_19_RELEASE';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'firefox.exe';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-$ProfiledBuild = 1;
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = "4";
-$package_creation_path = "/browser/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "cltbld";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-$ftp_path      = "/home/ftp/pub/firefox/nightly";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly";
-$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
-# CONFIG: $milestone     = 'firefox%version%';
-$milestone     = 'firefox3.0.19';
-$notify_list   = 'build-announce@mozilla.org';
-$stub_installer = 0;
-$sea_installer = 1;
-$archive       = 1;
-$push_raw_xpis = 0;
-$update_package = 1;
-$update_product = "Firefox";
-$update_version = "trunk";
-$update_platform = "WINNT_x86-msvc";
-$update_hash = "sha1";
-$update_filehost = "ftp.mozilla.org";
-$update_ver_file = 'browser/config/version.txt';
-$update_pushinfo = 0;
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'ffxbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_ffx';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/c/Documents and Settings/cltbld/.ssh/ffxbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';
-
-# Do not build XForms
-$BuildXForms = 0;

mozilla/tools/tinderbox-configs/thunderbird/linux/CLOBBER

@@ -1 +0,0 @@
-Clobbering to force nightly due to nightly bustage from bug 428672.

mozilla/tools/tinderbox-configs/thunderbird/linux/mozconfig

@@ -1,25 +0,0 @@
-#
-## hostname: tb-linux-tbox
-## uname: Linux tb-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 athlon i386 GNU/Linux
-#
-
-# symbols for breakpad
-export CFLAGS="-gstabs+"
-export CXXFLAGS="-gstabs+"
-
-mk_add_options MOZ_CO_PROJECT=mail
-mk_add_options MOZ_MAKE_FLAGS=-j1
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
-
-ac_add_options --enable-application=mail
-ac_add_options --enable-update-channel=beta
-ac_add_options --disable-debug
-ac_add_options --enable-update-packaging
-# Add explicit optimize flags in configure.in, not here - see bug 407794
-ac_add_options --enable-optimize
-ac_add_options --disable-tests
-ac_add_options --disable-shared
-ac_add_options --enable-static
-
-CC=/tools/gcc-4.1.1/bin/gcc
-CXX=/tools/gcc-4.1.1/bin/g++

mozilla/tools/tinderbox-configs/thunderbird/linux/tinder-config.pl

@@ -1,225 +0,0 @@
-#
-## hostname: tb-linux-tbox
-## uname: Linux tbnewref-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 athlon i386 GNU/Linux
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{CVS_RSH} = "ssh";
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-$BuildDepend       = 0;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "Thunderbird";
-#$VendorName               = "";
-
-$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
-#$RegxpcomTest             = 1;
-#$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-#$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-#$LayoutPerformanceTest    = 0;  # Tp
-#$QATest                   = 0;  
-#$XULWindowOpenTest        = 0;  # Txul
-#$StartupPerformanceTest   = 0;  # Ts
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-#$results_server           = "axolotl.mozilla.org"; # was tegu
-#$pageload_server          = "spider";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 15;
-
-#$AliveTestTimeout                 = 45;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 60;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-#$Make          = 'gmake';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-#$blat           = 'c:/nstools/bin/blat';
-#$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
-$moz_cvsroot   = 'cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = 'obj-tb-trunk';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Release';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaRelease';
-
-#$BuildName = '';
-# CONFIG: $BuildTag = '%productTag%_RELEASE';
-$BuildTag = 'THUNDERBIRD_3_0a2_RELEASE';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'thunderbird-bin';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# allow override of timezone value (for win32 POSIX::strftime)
-#$Timezone = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$shiptalkback  = 0;
-$build_hour    = "3";
-$package_creation_path = "/mail/installer";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "cltbld";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-#$ReleaseGroup  = "thunderbird";
-$ftp_path      = "/home/ftp/pub/thunderbird/nightly";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/nightly";
-$tbox_ftp_path = "/home/ftp/pub/thunderbird/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/tinderbox-builds";
-# CONFIG: $milestone     = 'thunderbird%version%';
-$milestone     = 'thunderbird3.0a2';
-$notify_list   = "build-announce\@mozilla.org";
-$stub_installer = 0;
-$sea_installer = 0;
-$archive       = 1;
-$update_package = 1;
-$update_product = "Thunderbird";
-$update_version = "trunk";
-$update_platform = "Linux_x86-gcc3";
-$update_hash = "sha1";
-$update_filehost = "ftp.mozilla.org";
-$update_ver_file = "mail/config/version.txt";
-$update_pushinfo = 0;
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'tbirdbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_tbrd';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/home/cltbld/.ssh/tbirdbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = 'bzip2';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = 'base64';
-
-

mozilla/tools/tinderbox-configs/thunderbird/macosx/CLOBBER

@@ -1 +0,0 @@
-Clobbering to force nightly due to nightly bustage from bug 428672.

mozilla/tools/tinderbox-configs/thunderbird/macosx/mozconfig

@@ -1,28 +0,0 @@
-#
-## hostname: bm-xserve07.build.mozilla.org
-## uname: Darwin bm-xserve07.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
-#
-
-# symbols for breakpad
-export CFLAGS="-g -gfull"
-export CXXFLAGS="-g -gfull"
-
-. $topsrcdir/build/macosx/universal/mozconfig
-
-# Make flags
-mk_add_options MOZ_CO_PROJECT=mail
-mk_add_options MOZ_MAKE_FLAGS="-j1"
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
-mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/../build/universal
-
-# Configure flags
-ac_add_options --enable-application=mail
-ac_add_options --enable-update-channel=beta
-# Add explicit optimize flags in configure.in, not here - see bug 407794
-ac_add_options --enable-optimize
-ac_add_options --disable-debug
-ac_add_options --disable-tests
-ac_add_options --enable-static
-ac_add_options --disable-shared
-
-ac_add_options --enable-update-packaging

mozilla/tools/tinderbox-configs/thunderbird/macosx/tinder-config.pl

@@ -1,262 +0,0 @@
-#
-## hostname: bm-xserve07.build.mozilla.org
-## uname: Darwin bm-xserve07.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-# $ENV{NO_EM_RESTART} = "1";
-# $ENV{DYLD_NO_FIX_PREBINDING} = "1";
-# $ENV{LD_PREBIND_ALLOW_OVERLAP} = "1";
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-
-$MacUniversalBinary = 1;
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "Thunderbird";
-#$VendorName               = 'Mozilla';
-
-$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
-$RegxpcomTest             = 1;
-$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-#$LayoutPerformanceTest    = 0;  # Tp
-#$DHTMLPerformanceTest     = 0;  # Tdhtml
-#$QATest                   = 0;  
-#$XULWindowOpenTest        = 0;  # Txul
-#$StartupPerformanceTest   = 0;  # Ts
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-#$pageload_server          = "spider";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 45;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 15;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-#$Make          = 'gmake';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-#$blat           = 'c:/nstools/bin/blat';
-#$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-#$moz_cvsroot   = $ENV{CVSROOT};
-# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
-$moz_cvsroot   = 'cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = '../build/universal';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Release';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-#$BuildTree  = 'MozillaTest';
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaRelease';
-
-#$BuildName = '';
-# CONFIG: $BuildTag = '%productTag%_RELEASE';
-$BuildTag = 'THUNDERBIRD_3_0a2_RELEASE';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'thunderbird-bin';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = "3";
-$package_creation_path = "/mail/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$mac_bundle_path = "/mail/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "cltbld";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-#$ReleaseGroup  = "thunderbird";
-$ftp_path      = "/home/ftp/pub/thunderbird/nightly";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/nightly";
-$tbox_ftp_path = "/home/ftp/pub/thunderbird/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/tinderbox-builds";
-# CONFIG: $milestone     = 'thunderbird%version%';
-$milestone     = 'thunderbird3.0a2';
-$notify_list   = "build-announce\@mozilla.org";
-$stub_installer = 0;
-$sea_installer = 0;
-$archive       = 1;
-$push_raw_xpis = 0;
-$update_package = 1;
-$update_product = "Thunderbird";
-$update_version = "trunk";
-$update_platform = "Darwin_Universal-gcc3";
-$update_hash = "sha1";
-$update_filehost = "ftp.mozilla.org";
-$update_ver_file = "mail/config/version.txt";
-$update_pushinfo = 0;
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'tbirdbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_tbrd';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/Users/cltbld/.ssh/tbirdbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/thunderbird/win32/CLOBBER

@@ -1 +0,0 @@
-Clobbering to force nightly due to nightly bustage from bug 428672.

mozilla/tools/tinderbox-configs/thunderbird/win32/mozconfig

@@ -1,22 +0,0 @@
-#
-## hostname: tbnewref-win32-tbox
-## MINGW32_NT-5.2 TBNEWREF-WIN32- 1.0.11(0.46/3/2) 2007-01-12 12:05 i686 Msys
-#
-
-mk_add_options MOZ_CO_PROJECT=mail
-mk_add_options MOZ_DEBUG_SYMBOLS=1
-mk_add_options MOZ_MAKE_FLAGS=-j1
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
-
-ac_add_options --enable-application=mail
-ac_add_options --enable-update-channel=beta
-ac_add_options --disable-debug
-# Add explicit optimize flags in configure.in, not here - see bug 407794
-ac_add_options --enable-optimize
-ac_add_options --disable-tests
-ac_add_options --disable-shared
-ac_add_options --enable-static
-ac_add_options --enable-update-packaging
-
-export WIN32_REDIST_DIR="/d/msvs8/VC/redist/x86/Microsoft.VC80.CRT"
-

mozilla/tools/tinderbox-configs/thunderbird/win32/tinder-config.pl

@@ -1,235 +0,0 @@
-#
-## hostname: tbnewref-win32-tbox
-## MINGW32_NT-5.2 TBNEWREF-WIN32- 1.0.11(0.46/3/2) 2007-01-12 12:05 i686 Msys
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{CVSROOT}=":ext:tbirdbld\@cvs.mozilla.org:/cvsroot";
-$ENV{MOZ_INSTALLER_USE_7ZIP}="1";
-$ENV{MOZ_PACKAGE_MSI} = 0;
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-# Both these two variables are for source server support
-$ENV{PDBSTR_PATH} = 'C:\\Program Files\\Debugging Tools for Windows\\sdk\\srcsrv\\pdbstr.exe';
-$ENV{SRCSRV_ROOT} = ':pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot';
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-$BuildDepend       = 0;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "Thunderbird";
-#$VendorName               = '';
-
-$RunMozillaTests          = 1;  # Allow turning off of all tests if needed.
-#$RegxpcomTest             = 1;
-#$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-#$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-#$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-#$LayoutPerformanceTest    = 0;  # Tp
-#$DHTMLPerformanceTest     = 0;  # Tdhtml
-#$QATest                   = 0;  
-#$XULWindowOpenTest        = 0;  # Txul
-#$StartupPerformanceTest   = 0;  # Ts
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-#$results_server           = "axolotl.mozilla.org"; # was tegu
-#$pageload_server          = "spider";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 45;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 15;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-$Make          = 'make';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-$blat           = '/d/mozilla-build/blat261/full/blat';
-$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-# CONFIG: $moz_cvsroot = '%mozillaCvsroot%';
-$moz_cvsroot = 'cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = 'obj-tb-trunk';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Release';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaRelease';
-
-#$BuildName = '';
-# CONFIG: $BuildTag = '%productTag%_RELEASE';
-$BuildTag = 'THUNDERBIRD_3_0a2_RELEASE';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'thunderbird.exe';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 0;
-$ReleaseToDated = 1;
-$build_hour    = "3";
-$package_creation_path = "/mail/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "cltbld";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-#$ReleaseGroup  = "thunderbird";
-$ftp_path      = "/home/ftp/pub/thunderbird/nightly";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/nightly";
-$tbox_ftp_path      = "/home/ftp/pub/thunderbird/tinderbox-builds";
-$tbox_url_path      = "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/tinderbox-builds";
-# CONFIG: $milestone     = 'thunderbird%version%';
-$milestone     = 'thunderbird3.0a2';
-$notify_list   = "build-announce\@mozilla.org";
-$stub_installer = 0;
-$sea_installer = 1;
-$archive       = 1;
-$push_raw_xpis = 1;
-
-$update_package = 1;
-$update_product = "Thunderbird";
-$update_version = "trunk";
-$update_ver_file = "mail/config/version.txt";
-$update_platform = "WINNT_x86-msvc";
-$update_hash = "sha1";
-$update_filehost = "ftp.mozilla.org";
-$update_pushinfo = 0;
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'tbirdbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_tbrd';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/c/Documents and Settings/cltbld/.ssh/tbirdbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/xulrunner/linux/CLOBBER

@@ -1 +0,0 @@
-Clobbering to fix up checkout issues

mozilla/tools/tinderbox-configs/xulrunner/linux/mozconfig

@@ -1,17 +0,0 @@
-#
-## hostname: xr-linux-tbox
-## uname: Linux xr-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
-#
-
-export MOZILLA_OFFICIAL=1
-export JAVA_HOME=/tools/jdk
-mk_add_options MOZILLA_OFFICIAL=1
-
-mk_add_options MOZ_CO_PROJECT=xulrunner
-mk_add_options MOZ_MAKE_FLAGS="-j3"
-
-ac_add_options --enable-application=xulrunner
-ac_add_options --disable-tests
-
-CC=/tools/gcc-4.1.1/bin/gcc
-CXX=/tools/gcc-4.1.1/bin/g++

mozilla/tools/tinderbox-configs/xulrunner/linux/tinder-config.pl

@@ -1,262 +0,0 @@
-#
-## hostname: xr-linux-tbox
-## uname: Linux xr-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-$BuildAdministrator = "build\@mozilla.org";
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$ConfigureOnly     = 0;      # Configure, but do not build.
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-$BuildSDK           = 1;      # Build the SDK
-
-# Only used when $BuildLocales = 1
-%WGetFiles         = ();  # Pull files from the web, URL => Location
-#$WGetTimeout       = 360; # Wget timeout, in seconds
-#$BuildLocalesArgs  = "";  # Extra attributes to add to the makefile command
-                          # which builds the "installers-<locale>" target.
-                          # Typically used to set ZIP_IN and WIN32_INSTALLER_IN
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "XULRunner";
-$VendorName               = 'Mozilla';
-
-$RunMozillaTests          = 0;  # Allow turning off of all tests if needed.
-#$RegxpcomTest             = 1;
-#$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-#$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-#$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-#$LayoutPerformanceTest    = 0;  # Tp
-#$DHTMLPerformanceTest     = 0;  # Tdhtml
-#$QATest                   = 0;  
-#$XULWindowOpenTest        = 0;  # Txul
-#$StartupPerformanceTest   = 0;  # Ts
-#@CompareLocaleDirs        = (); # Run compare-locales test on these directories
-# ("network","dom","toolkit","security/manager");
-#$CompareLocalesAviary     = 0;  # Should the compare-locales commands use the
-                                # aviary directory structure?
-
-#$TestsPhoneHome           = 0;  # Should test report back to server?
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-#$pageload_server          = "spider";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 45;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 15;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-#$Make          = 'gmake';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-#$blat           = 'c:/nstools/bin/blat';
-#$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-#$moz_cvsroot   = $ENV{CVSROOT};
-# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
-$moz_cvsroot   = 'cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = 'obj-xulrunner';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Release';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaRelease';
-
-#$BuildName = '';
-# CONFIG: $BuildTag = '%productTag%_RELEASE';
-$BuildTag = 'FIREFOX_3_0_17_RELEASE';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'xulrunner-bin';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-#$LocaleProduct = "browser";
-$shiptalkback  = 0;
-$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-#$build_hour    = "8";
-$package_creation_path = "/xulrunner/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "cltbld";
-#$ssh_key       = "$ENV{HOME}/.ssh/xrbld_dsa";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-$ReleaseGroup  = "xulrunner";
-$ftp_path      = "/home/ftp/pub/xulrunner/nightly";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/xulrunner/nightly";
-$tbox_ftp_path = "/home/ftp/pub/xulrunner/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/xulrunner/tinderbox-builds";
-# CONFIG: $milestone     = "xulrunner%version%";
-$milestone     = "xulrunner1.9.0.17";
-$notify_list   = "build-announce\@mozilla.org";
-$stub_installer = 0;
-$sea_installer = 0;
-$archive       = 1;
-$push_raw_xpis = 0;
-$crashreporter_buildsymbols = 0;
-$crashreporter_pushsymbols = 0;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'stage-old.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'xrbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_xr';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/home/cltbld/.ssh/xrbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/xulrunner/macosx/CLOBBER

@@ -1 +0,0 @@
-CLOBBERing to disable zipwriter from bug 379633

mozilla/tools/tinderbox-configs/xulrunner/macosx/mozconfig

@@ -1,20 +0,0 @@
-#
-## hostname: bm-xserve09.build.mozilla.org
-## uname: Darwin bm-xserve09.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
-#
-
-. $topsrcdir/build/macosx/universal/mozconfig
-
-export MOZILLA_OFFICIAL=1
-export JAVA_HOME=/System/Library/Frameworks/JavaVM.framework/Home
-mk_add_options MOZILLA_OFFICIAL=1
-
-mk_add_options MOZ_CO_PROJECT=xulrunner
-mk_add_options MOZ_MAKE_FLAGS="-j8"
-mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/../build/universal
-
-ac_add_options --enable-application=xulrunner
-ac_add_options --disable-tests
-ac_add_options --enable-svg
-ac_add_options --enable-canvas
-ac_add_app_options ppc --enable-prebinding

mozilla/tools/tinderbox-configs/xulrunner/macosx/tinder-config.pl

@@ -1,268 +0,0 @@
-#
-## hostname: bm-xserve09.build.mozilla.org
-## uname: Darwin bm-xserve09.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$MacUniversalBinary = 1;
-
-$ENV{CHOWN_ROOT} = "/builds/tinderbox/bin/chown_root";
-$ENV{REVERT_ROOT} = "/builds/tinderbox/bin/revert_root";
-$ENV{CHOWN_REVERT} = $ENV{REVERT_ROOT};
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-$BuildAdministrator = "build\@mozilla.org";
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$ConfigureOnly     = 0;      # Configure, but do not build.
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-$BuildSDK           = 1;      # Build the SDK
-
-# Only used when $BuildLocales = 1
-%WGetFiles         = ();  # Pull files from the web, URL => Location
-#$WGetTimeout       = 360; # Wget timeout, in seconds
-#$BuildLocalesArgs  = "";  # Extra attributes to add to the makefile command
-                          # which builds the "installers-<locale>" target.
-                          # Typically used to set ZIP_IN and WIN32_INSTALLER_IN
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "XULRunner";
-$VendorName               = 'Mozilla';
-
-$RunMozillaTests          = 0;  # Allow turning off of all tests if needed.
-#$RegxpcomTest             = 1;
-#$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-#$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-#$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-#$LayoutPerformanceTest    = 0;  # Tp
-#$DHTMLPerformanceTest     = 0;  # Tdhtml
-#$QATest                   = 0;  
-#$XULWindowOpenTest        = 0;  # Txul
-#$StartupPerformanceTest   = 0;  # Ts
-#@CompareLocaleDirs        = (); # Run compare-locales test on these directories
-# ("network","dom","toolkit","security/manager");
-#$CompareLocalesAviary     = 0;  # Should the compare-locales commands use the
-                                # aviary directory structure?
-
-#$TestsPhoneHome           = 0;  # Should test report back to server?
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-#$pageload_server          = "spider";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 45;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 15;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-#$Make          = 'gmake';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-#$blat           = 'c:/nstools/bin/blat';
-#$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-# sharing bm-xserve09 with T'bird build, do all CVS pulls with that key
-# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
-$moz_cvsroot   = 'cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = '../build/universal';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Release';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaRelease';
-
-#$BuildName = '';
-# CONFIG: $BuildTag = '%productTag%_RELEASE';
-$BuildTag = 'FIREFOX_3_0_17_RELEASE';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'xulrunner-bin';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-#$LocaleProduct = "browser";
-$shiptalkback  = 0;
-$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-#$build_hour    = "8";
-$package_creation_path = "/xulrunner/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "cltbld";
-#$ssh_key       = "$ENV{HOME}/.ssh/xrbld_dsa";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-$ReleaseGroup  = "xulrunner";
-$ftp_path      = "/home/ftp/pub/xulrunner/nightly";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/xulrunner/nightly";
-$tbox_ftp_path = "/home/ftp/pub/xulrunner/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/xulrunner/tinderbox-builds";
-# CONFIG: $milestone     = 'xulrunner%version%';
-$milestone     = 'xulrunner1.9.0.17';
-$notify_list   = "build-announce\@mozilla.org";
-$stub_installer = 0;
-$sea_installer = 0;
-$archive       = 1;
-$push_raw_xpis = 0;
-$crashreporter_buildsymbols = 0;
-$crashreporter_pushsymbols = 0;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'stage-old.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'xrbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_xr';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/Users/cltbld/.ssh/xrbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/xulrunner/win32/CLOBBER

@@ -1 +0,0 @@
-Preemptive clobber for /README.txt merge conflict.

mozilla/tools/tinderbox-configs/xulrunner/win32/mozconfig

@@ -1,18 +0,0 @@
-#
-# hostname: fxexp-win32-tbox
-# uname: CYGWIN_NT-5.2 fxexp-win32-tbox 1.5.19(0.150/4/2) 2006-01-20 13:28 i686 Cygwin
-#
-
-export MOZILLA_OFFICIAL
-export JAVA_HOME=/d/jdk1.5.0_10
-
-mk_add_options MOZILLA_OFFICIAL=1
-mk_add_options MOZ_CO_PROJECT=xulrunner
-mk_add_options MOZ_MAKE_FLAGS="-j2"
-
-ac_add_options --enable-application=xulrunner
-ac_add_options --enable-jemalloc
-ac_add_options --disable-tests
-ac_add_options --enable-svg
-ac_add_options --enable-canvas
-ac_add_options --disable-installer

mozilla/tools/tinderbox-configs/xulrunner/win32/tinder-config.pl

@@ -1,255 +0,0 @@
-#
-# hostname: fxexp-win32-tbox
-# uname: CYGWIN_NT-5.2 fxexp-win32-tbox 1.5.19(0.150/4/2) 2006-01-20 13:28 i686 Cygwin
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{NO_EM_RESTART} = "1";
-$ENV{MOZ_INSTALLER_USE_7ZIP} = "1";
-$ENV{CVS_RSH} = "ssh";
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-# Both these two variables are for source server support
-$ENV{PDBSTR_PATH} = 'C:\\Program Files\\Debugging Tools for Windows\\sdk\\srcsrv\\pdbstr.exe';
-$ENV{SRCSRV_ROOT} = ':pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot';
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-$BuildAdministrator = 'build@mozilla.org';
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-$UseTimeStamp      = 0;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-$BuildSDK           = 1;      # Build the SDK
-
-# Tests
-#$CleanProfile             = 0;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "XULRunner";
-$VendorName               = 'Mozilla';
-
-$RunMozillaTests          = 0;  # Allow turning off of all tests if needed.
-#$RegxpcomTest             = 1;
-#$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-#$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-#$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-#$LayoutPerformanceTest    = 0;  # Tp
-#$DHTMLPerformanceTest     = 0;  # Tdhtml
-#$QATest                   = 0;  
-#$XULWindowOpenTest        = 0;  # Txul
-#$StartupPerformanceTest   = 0;  # Ts
-
-#$TestsPhoneHome           = 0;  # Should test report back to server?
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-#$pageload_server          = "spider";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 45;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 15;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-$Make          = 'make';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-$blat           = '/d/mozilla-build/blat261/full/blat';
-$use_blat       = 1;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-#$moz_cvsroot   = $ENV{CVSROOT};
-# CONFIG: $moz_cvsroot = '%mozillaCvsroot%';
-$moz_cvsroot = 'cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = 'obj-xulrunner';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Release';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaRelease';
-
-#$BuildName = '';
-# CONFIG: $BuildTag = '%productTag%_RELEASE';
-$BuildTag = 'FIREFOX_3_0_17_RELEASE';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'xulrunner.exe';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 0; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-#$build_hour    = "8";
-$package_creation_path = "/xulrunner/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "cltbld";
-#$ssh_key       = "'$ENV{HOME}/.ssh/xrbld_dsa'";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-$ReleaseGroup  = "xulrunner";
-$ftp_path      = "/home/ftp/pub/xulrunner/nightly";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/xulrunner/nightly";
-$tbox_ftp_path = "/home/ftp/pub/xulrunner/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/xulrunner/tinderbox-builds";
-# CONFIG: $milestone     = 'xulrunner%version%';
-$milestone     = 'xulrunner1.9.0.17';
-$notify_list   = 'build-announce@mozilla.org';
-$stub_installer = 0;
-$sea_installer = 0;
-$archive       = 1;
-$push_raw_xpis = 0;
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'stage-old.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'xrbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_xr';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/c/Documents and Settings/cltbld/.ssh/xrbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';