mac needs to pull from the release static tags, too

git-svn-id: svn://10.0.0.236/branches/Netscape_PR3_BRANCH@80268 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/build/mac/PullNGlayout.pl

@@ -0,0 +1,54 @@
+#!perl
+
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#
+
+#
+# nglayout pull script 
+#
+use Mac::Processes;
+use NGLayoutBuildList;
+use Cwd;
+use Moz;
+
+# configuration variables
+$pull{all} = 1;
+$pull{moz} = 0;
+$pull{runtime} = 0;
+
+if ($pull{all})
+{
+    foreach $k (keys(%pull))
+    {
+        $pull{$k} = 1;
+    }
+}
+
+# you should not have to edit anything bellow
+
+chdir("::::");
+
+Moz::StopForErrors();
+#Moz::DontStopForErrors();
+
+OpenErrorLog("NGLayoutPullLog");
+
+Checkout();

mozilla/client.mak

@@ -0,0 +1,408 @@
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+DEPTH=.
+
+!if !defined(MOZ_TOP)
+#enable builds from changed top level directories
+MOZ_TOP=mozilla
+!endif
+
+#
+# Command macro defines
+#
+
+#//------------------------------------------------------------------------
+#// Figure out how to do the pull.
+#//------------------------------------------------------------------------
+# uncomment these, only pull release tag if you pulled client.mak from the
+# release tag
+MOZ_BRANCH=Netscape_PR3_RELEASE
+NSPR_CO_TAG=Netscape_PR3_RELEASE
+PSM_CO_TAG=Netscape_PR3_RELEASE
+LDAP_SDK_CO_TAG=Netscape_PR3_RELEASE
+
+!if "$(MOZ_BRANCH)" != ""
+CVS_BRANCH=-r $(MOZ_BRANCH)
+HAVE_BRANCH=1
+!else
+HAVE_BRANCH=0
+!endif
+
+!if "$(MOZ_DATE)" != ""
+CVS_BRANCH=-D "$(MOZ_DATE)"
+HAVE_DATE=1
+!else
+HAVE_DATE=0
+!endif
+
+!if $(HAVE_DATE) && $(HAVE_BRANCH)
+ERR_MESSAGE=$(ERR_MESSAGE)^
+Cannot specify both MOZ_BRANCH and MOZ_DATE
+!endif
+
+!if "$(MOZ_CVS_FLAGS)" != ""
+CVS_FLAGS=$(MOZ_CVS_FLAGS)
+!endif
+
+# let's be explicit about CVSROOT... some windows cvs clients
+# are too stupid to correctly work without the -d option 
+#
+#  if they are too stupid, they should fail.  I am
+#  commenting this out because this does not work
+#  under 4nt.  (%'s are evaluted differently)
+#
+#  If it breaks you, mail dougt@netscape.com
+#  and leaf@mozilla.org
+#
+!if 0
+!if defined(CVSROOT)
+CVS_FLAGS=$(CVS_FLAGS) -d "$(CVSROOT)"
+!endif
+!endif
+
+CVSCO = cvs -q $(CVS_FLAGS) co $(CVS_BRANCH) -P
+
+CVSCO_TAG = cvs -q co -P
+
+# Branch tags we use
+
+IMGLIB_BRANCH =
+PLUGIN_BRANCH =
+XPCOM_BRANCH =
+
+!if defined(MOZ_DATE)
+# CVS commands to pull the appropriate branch versions
+CVSCO_LIBPREF = $(CVSCO)
+CVSCO_PLUGIN = $(CVSCO)
+!else
+# CVS commands to pull the appropriate branch versions
+CVSCO_LIBPREF = $(CVSCO) -A
+CVSCO_PLUGIN = $(CVSCO) -A
+!endif
+
+CVSCO_XPCOM = $(CVSCO)
+CVSCO_IMGLIB = $(CVSCO)
+CVSCO_RAPTOR = $(CVSCO)
+CVSCO_LIZARD = $(CVSCO)
+CVSCO_NETWORK = $(CVSCO)
+
+#//------------------------------------------------------------------------
+#// Figure out how to pull NSPR.
+#// If no NSPR_CO_TAG is specified, use the default static tag
+#//------------------------------------------------------------------------
+
+
+!if "$(NSPR_CO_TAG)" != ""
+NSPR_CO_FLAGS=-r $(NSPR_CO_TAG)
+!else
+NSPR_CO_FLAGS=-r NSPRPUB_CLIENT_BRANCH
+!endif
+
+CVSCO_NSPR = cvs -q $(CVS_FLAGS) co $(NSPR_CO_FLAGS) -P
+
+#//------------------------------------------------------------------------
+#// Figure out how to pull PSM client libs.
+#// If no PSM_CO_TAG is specified, use the default static tag
+#//------------------------------------------------------------------------
+
+!if "$(PSM_CO_TAG)" != ""
+PSM_CO_FLAGS=-r $(PSM_CO_TAG)
+!else
+PSM_CO_FLAGS=-r SECURITY_CLIENT_BRANCH
+!endif
+
+CVSCO_PSM = cvs -q $(CVS_FLAGS) co $(PSM_CO_FLAGS) -P
+
+#//------------------------------------------------------------------------
+#// Figure out how to pull LDAP C SDK client libs.
+#// If no LDAPCSDK_CO_TAG is specified, use the default tag
+#//------------------------------------------------------------------------
+
+!if "$(LDAPCSDK_CO_TAG)" != ""
+LDAPCSDK_CO_FLAGS=-r $(LDAPSDK_CO_TAG)
+!else
+LDAPCSDK_CO_FLAGS=-r LDAPCSDK_40_BRANCH
+!endif
+
+CVSCO_LDAPCSDK = cvs -q $(CVS_FLAGS) co $(LDAPCSDK_CO_FLAGS) -P
+
+## The master target
+############################################################
+
+pull_and_build_all: pull_all depend build_all
+
+
+## Rules for pulling the source from the cvs repository
+############################################################
+
+pull_clobber_and_build_all: pull_all clobber_all build_all
+
+pull_all: pull_nspr pull_psm pull_ldapcsdk pull_seamonkey
+
+pull_nspr: pull_clientmak
+      cd $(MOZ_SRC)\.
+      $(CVSCO_NSPR) mozilla/nsprpub
+
+pull_psm:
+	cd $(MOZ_SRC)\.
+	$(CVSCO_PSM) mozilla/security
+
+pull_ldapcsdk:
+	cd $(MOZ_SRC)\.
+	$(CVSCO_LDAPCSDK) mozilla/directory/c-sdk
+
+pull_xpconnect:
+	cd $(MOZ_SRC)\.
+	$(CVSCO_NSPR) mozilla/nsprpub
+	$(CVSCO) mozilla/include
+	$(CVSCO) mozilla/config
+	$(CVSCO) -l mozilla/js
+	$(CVSCO) -l mozilla/js/src
+	$(CVSCO) mozilla/js/src/fdlibm
+	$(CVSCO) mozilla/js/src/xpconnect
+	$(CVSCO) mozilla/modules/libreg
+	$(CVSCO) mozilla/xpcom
+
+# pull either layout only or seamonkey the browser
+pull_layout:
+	cd $(MOZ_SRC)\.
+	$(CVSCO) RaptorWin
+
+pull_seamonkey: pull_clientmak
+	cd $(MOZ_SRC)\.
+	$(CVSCO) SeaMonkeyAll
+
+pull_clientmak:
+    cd $(MOZ_SRC)\.
+    $(CVSCO) mozilla/client.mak
+
+############################################################
+
+# nmake has to be hardcoded, or we have to depend on mozilla/config
+# being pulled already to figure out what $(NMAKE) should be.
+
+clobber_all: clobber_nspr clobber_psm clobber_seamonkey
+
+build_all: build_nspr build_seamonkey
+
+clobber_nspr:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\nsprpub
+	nmake -f makefile.win clobber_all
+
+clobber_psm:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\security
+	nmake -f makefile.win clobber_all
+
+clobber_xpconnect:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\.
+	-rd /s /q dist
+	set DIST_DIRS=1
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\nsprpub
+	nmake -f makefile.win clobber_all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\include
+	nmake -f makefile.win clobber_all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\modules\libreg
+	nmake -f makefile.win clobber_all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\xpcom
+	nmake -f makefile.win clobber_all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\js
+	nmake -f makefile.win clobber_all
+
+clobber_seamonkey:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\.
+	-rd /s /q dist
+	set DIST_DIRS=1
+	set LAYOUT_DIRS=1
+	set CLIENT_DIRS=1
+	nmake -f makefile.win clobber_all 
+
+depend:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\.
+	set DIST_DIRS=1
+	set LAYOUT_DIRS=1
+	set CLIENT_DIRS=1
+	nmake -f makefile.win depend 
+
+build_nspr:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\nsprpub
+	nmake -f makefile.win export
+
+build_psm:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\security
+	nmake -f makefile.win export
+
+build_xpconnect:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\nsprpub
+	nmake -f makefile.win all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\include
+	nmake -f makefile.win all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\modules\libreg
+	nmake -f makefile.win all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\xpcom
+	nmake -f makefile.win all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\js\src
+	nmake -f makefile.win all
+
+build_seamonkey:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\.
+	set DIST_DIRS=1
+	set LAYOUT_DIRS=1
+	set CLIENT_DIRS=1
+	nmake -f makefile.win all
+
+build_client:
+	@cd $(MOZ_SRC)\mozilla\.
+	set CLIENT_DIRS=1
+	nmake -f makefile.win all
+
+build_layout:
+	@cd $(MOZ_SRC)\mozilla\.
+	set LAYOUT_DIRS=1
+	nmake -f makefile.win all
+
+build_dist:
+	@cd $(MOZ_SRC)\mozilla\.
+	set DIST_DIRS=1
+	nmake -f makefile.win all
+
+install:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\.
+	set DIST_DIRS=1
+	set LAYOUT_DIRS=1
+	set CLIENT_DIRS=1
+	nmake -f makefile.win install
+
+export:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\nsprpub
+	nmake -f makefile.win export
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\security
+	nmake -f makefile.win export
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\.
+	set DIST_DIRS=1
+	set LAYOUT_DIRS=1
+	set CLIENT_DIRS=1
+	nmake -f makefile.win export
+
+clobber_dist:
+	@cd $(MOZ_SRC)\mozilla\.
+	set DIST_DIRS=1
+	nmake -f makefile.win clobber_all
+
+clobber_client:
+	@cd $(MOZ_SRC)\mozilla\.
+	set CLIENT_DIRS=1
+	nmake -f makefile.win clobber_all
+
+clobber_layout:
+	@cd $(MOZ_SRC)\mozilla\.
+	set LAYOUT_DIRS=1
+	nmake -f makefile.win clobber_all
+
+browse_info::
+	cd $(MOZ_SRC)\$(MOZ_TOP)
+	-dir /s /b *.sbr > sbrlist.tmp
+	-bscmake /Es /o mozilla.bsc @sbrlist.tmp
+	-rm sbrlist.tmp
+
+regchrome::
+	@cd $(MOZ_SRC)\mozilla\.
+	set DIST_DIRS=1
+	set LAYOUT_DIRS=1
+	set CLIENT_DIRS=1
+	nmake /f makefile.win regchrome
+
+deliver::
+	@cd $(MOZ_SRC)\mozilla\.
+	set DIST_DIRS=1
+	set LAYOUT_DIRS=1
+	set CLIENT_DIRS=1
+	nmake /f makefile.win splitsymbols
+
+#//------------------------------------------------------------------------
+#// Utility stuff...
+#//------------------------------------------------------------------------
+
+#//------------------------------------------------------------------------
+# Verify that MOZ_SRC is set correctly
+#//------------------------------------------------------------------------
+
+# Check to see if it is set at all
+!if "$(MOZ_SRC)"!=""
+
+#
+# create a temp file at the root and make sure it is visible from MOZ_SRC
+#
+!if [copy $(MAKEDIR)\client.mak $(MAKEDIR)\xyzzy.tmp > NUL] == 0
+!endif
+
+!if !EXIST( $(MOZ_SRC)\mozilla\xyzzy.tmp )
+ERR_MESSAGE=$(ERR_MESSAGE)^
+MOZ_SRC isn't set correctly: [$(MOZ_SRC)\mozilla]!=[$(MAKEDIR)]
+!endif
+
+!if [del $(MAKEDIR)\xyzzy.tmp]
+!endif
+
+!else
+# MOZ_SRC isn't set at all
+ERR_MESSAGE=$(ERR_MESSAGE)^
+Environment variable MOZ_SRC isn't set.
+!endif
+
+#//------------------------------------------------------------------------
+# Verify that MOZ_BITS is set
+#//------------------------------------------------------------------------
+!if !defined(MOZ_BITS)
+ERR_MESSAGE=$(ERR_MESSAGE)^
+Environment variable MOZ_BITS isn't set.
+!endif
+
+!if !defined(MOZ_TOOLS)
+ERR_MESSAGE=$(ERR_MESSAGE)^
+Environment variable MOZ_TOOLS isn't set.
+!endif
+
+
+#//------------------------------------------------------------------------
+#// Display error 
+#//------------------------------------------------------------------------
+
+!if "$(ERR_MESSAGE)" != ""
+ERR_MESSAGE = ^
+client.mak:  ^
+$(ERR_MESSAGE) ^
+^
+client.mak: usage^
+^
+nmake -f client.mak [MOZ_BRANCH=<cvs_branch_name>] ^
+		    [MOZ_DATE=<cvs_date>]^
+		    [pull_and_build_all]^
+		    [pull_all]^
+		    [build_all]^
+^
+Environment variables:^
+^
+MOZ_BITS    set to 32^
+MOZ_SRC     set to the directory above mozilla or "$(MAKEDIR)\.."^
+MOZ_TOOLS   set to the directory containing the needed tools ^
+
+!ERROR $(ERR_MESSAGE)
+
+!endif

mozilla/client.mk

@@ -0,0 +1,428 @@
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Stephen Lamm
+
+# Build the Mozilla client.
+#
+# This needs CVSROOT set to work, e.g.,
+#   setenv CVSROOT :pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
+# or
+#   setenv CVSROOT :pserver:username%somedomain.org@cvs.mozilla.org:/cvsroot
+# 
+# To checkout and build a tree,
+#    1. cvs co mozilla/client.mk
+#    2. cd mozilla
+#    3. gmake -f client.mk
+#
+# Other targets (gmake -f client.mk [targets...]),
+#    checkout
+#    build
+#    clean (realclean is now the same as clean)
+#    distclean
+#
+# See http://www.mozilla.org/build/unix.html for more information.
+#
+# Options:
+#   MOZ_OBJDIR           - Destination object directory
+#   MOZ_CO_DATE          - Date tag to use for checkout (default: none)
+#   MOZ_CO_MODULE        - Module to checkout (default: SeaMonkeyAll)
+#   MOZ_CVS_FLAGS        - Flags to pass cvs (default: -q -z3)
+#   MOZ_CO_FLAGS         - Flags to pass after 'cvs co' (default: -P)
+#   MOZ_MAKE_FLAGS       - Flags to pass to $(MAKE)
+#   MOZ_CO_BRANCH        - Branch tag (Depricated. Use MOZ_CO_TAG below.)
+#
+
+#######################################################################
+# Checkout Tags
+#
+# For branches, uncomment the MOZ_CO_TAG line with the proper tag,
+# and commit this file on that tag.
+MOZ_CO_TAG = Netscape_PR3_RELEASE
+NSPR_CO_TAG = Netscape_PR3_RELEASE
+PSM_CO_TAG = Netscape_PR3_RELEASE
+LDAPCSDK_CO_TAG = Netscape_PR3_RELEASE
+BUILD_MODULES = all
+
+#######################################################################
+# Defines
+#
+CWD := $(shell pwd)
+
+ifeq "$(CWD)" "/"
+CWD   := /.
+endif
+
+ifneq (, $(wildcard client.mk))
+# Ran from mozilla directory
+ROOTDIR   := $(shell dirname $(CWD))
+TOPSRCDIR := $(CWD)
+else
+# Ran from mozilla/.. directory (?)
+ROOTDIR   := $(CWD)
+TOPSRCDIR := $(CWD)/mozilla
+endif
+
+ifeq "$(ROOTDIR)" "/"
+ROOTDIR   := /.
+endif
+
+AUTOCONF := autoconf
+MKDIR := mkdir
+SH := /bin/sh
+ifndef MAKE
+MAKE := gmake
+endif
+
+CONFIG_GUESS_SCRIPT := $(wildcard $(TOPSRCDIR)/build/autoconf/config.guess)
+ifdef CONFIG_GUESS_SCRIPT
+  CONFIG_GUESS = $(shell $(CONFIG_GUESS_SCRIPT))
+else
+  _IS_FIRST_CHECKOUT := 1
+endif
+
+####################################
+# CVS
+
+# Add the CVS root to CVS_FLAGS if needed
+CVS_ROOT_IN_TREE := $(shell cat $(TOPSRCDIR)/CVS/Root 2>/dev/null)
+ifneq ($(CVS_ROOT_IN_TREE),)
+ifneq ($(CVS_ROOT_IN_TREE),$(CVSROOT))
+  CVS_FLAGS := -d $(CVS_ROOT_IN_TREE)
+endif
+endif
+
+CVSCO = $(strip cvs $(CVS_FLAGS) co $(CVS_CO_FLAGS))
+CVSCO_LOGFILE := $(ROOTDIR)/cvsco.log
+
+ifdef MOZ_CO_TAG
+  CVS_CO_FLAGS :=  -r $(MOZ_CO_TAG)
+endif
+
+####################################
+# Load mozconfig Options
+
+# See build pages, http://www.mozilla.org/build/unix.html, 
+# for how to set up mozconfig.
+MOZCONFIG_LOADER := mozilla/build/autoconf/mozconfig2client-mk
+MOZCONFIG_FINDER := mozilla/build/autoconf/mozconfig-find 
+MOZCONFIG_MODULES := mozilla/build/unix/modules.mk
+run_for_side_effects := \
+  $(shell cd $(ROOTDIR); \
+     if test "$(_IS_FIRST_CHECKOUT)"; then \
+        $(CVSCO) $(MOZCONFIG_FINDER) $(MOZCONFIG_LOADER) $(MOZCONFIG_MODULES); \
+     else true; \
+     fi; \
+     $(MOZCONFIG_LOADER) $(TOPSRCDIR) mozilla/.mozconfig.mk > mozilla/.mozconfig.out)
+include $(TOPSRCDIR)/.mozconfig.mk
+include $(TOPSRCDIR)/build/unix/modules.mk
+
+####################################
+# Options that may come from mozconfig
+
+# Change CVS flags if anonymous root is requested
+ifdef MOZ_CO_USE_MIRROR
+  CVS_FLAGS := -d :pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
+endif
+
+# MOZ_CVS_FLAGS - Basic CVS flags
+ifeq "$(origin MOZ_CVS_FLAGS)" "undefined"
+  CVS_FLAGS := $(CVS_FLAGS) -q -z 3
+else
+  CVS_FLAGS := $(MOZ_CVS_FLAGS)
+endif
+
+# This option is depricated. The best way to have client.mk pull a tag
+# is to set MOZ_CO_TAG (see above) and commit that change on the tag.
+ifdef MOZ_CO_BRANCH
+  CVS_CO_FLAGS :=  -r $(MOZ_CO_BRANCH)
+endif
+
+# MOZ_CO_FLAGS - Anything that we should use on all checkouts
+ifeq "$(origin MOZ_CO_FLAGS)" "undefined"
+  CVS_CO_FLAGS := $(CVS_CO_FLAGS) -P
+else
+  CVS_CO_FLAGS := $(CVS_CO_FLAGS) $(MOZ_CO_FLAGS)
+endif
+
+ifdef MOZ_CO_DATE
+  CVS_CO_DATE_FLAGS := -D "$(MOZ_CO_DATE)"
+endif
+
+ifeq "$(origin MOZ_MAKE_FLAGS)" "undefined"
+  MOZ_MAKE_ENV :=
+else
+  MOZ_MAKE_ENV := MAKE="$(MAKE) $(MOZ_MAKE_FLAGS)"
+endif
+
+ifdef MOZ_OBJDIR
+  OBJDIR := $(MOZ_OBJDIR)
+  MOZ_MAKE := $(MOZ_MAKE_ENV) $(MAKE) -C $(OBJDIR)
+else
+  OBJDIR := $(TOPSRCDIR)
+  MOZ_MAKE := $(MOZ_MAKE_ENV) $(MAKE)
+endif
+
+####################################
+# CVS defines for PSM
+#
+PSM_CO_MODULE= mozilla/security
+PSM_CO_FLAGS := -P
+ifdef PSM_CO_TAG
+  PSM_CO_FLAGS := $(PSM_CO_FLAGS) -r $(PSM_CO_TAG)
+endif
+CVSCO_PSM = cvs $(CVS_FLAGS) co $(PSM_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(PSM_CO_MODULE)
+
+####################################
+# CVS defines for NSPR
+#
+NSPR_CO_MODULE = mozilla/nsprpub
+NSPR_CO_FLAGS := -P
+ifdef NSPR_CO_TAG
+  NSPR_CO_FLAGS := $(NSPR_CO_FLAGS) -r $(NSPR_CO_TAG)
+endif
+CVSCO_NSPR = cvs $(CVS_FLAGS) co $(NSPR_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(NSPR_CO_MODULE)
+
+####################################
+# CVS defines for the C LDAP SDK
+#
+LDAPCSDK_CO_MODULE = mozilla/directory/c-sdk
+LDAPCSDK_CO_FLAGS := -P
+ifdef LDAPCSDK_CO_TAG
+  LDAPCSDK_CO_FLAGS := $(LDAPCSDK_CO_FLAGS) -r $(LDAPCSDK_CO_TAG)
+endif
+CVSCO_LDAPCSDK = cvs $(CVS_FLAGS) co $(LDAPCSDK_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(LDAPCSDK_CO_MODULE)
+
+####################################
+# CVS defines for standalone modules
+#
+ifneq ($(BUILD_MODULES),all)
+  MOZ_CO_MODULE := $(filter-out $(NSPRPUB_DIR) security directory/c-sdk, $(BUILD_MODULE_DIRS))
+  MOZ_CO_MODULE += allmakefiles.sh client.mk aclocal.m4 configure configure.in
+  MOZ_CO_MODULE += Makefile.in
+  MOZ_CO_MODULE := $(addprefix mozilla/, $(MOZ_CO_MODULE))
+ifeq (,$(filter $(NSPRPUB_DIR), $(BUILD_MODULE_DIRS)))
+  CVSCO_NSPR :=
+endif
+ifeq (,$(filter security, $(BUILD_MODULE_DIRS)))
+  CVSCO_PSM :=
+endif
+ifeq (,$(filter directory/c-sdk, $(BUILD_MODULE_DIRS)))
+  CVSCO_LDAPCSDK :=
+endif
+endif
+
+####################################
+# CVS defines for SeaMonkey
+#
+ifeq ($(MOZ_CO_MODULE),)
+  MOZ_CO_MODULE := SeaMonkeyAll
+endif
+CVSCO_SEAMONKEY := $(CVSCO) $(CVS_CO_DATE_FLAGS) $(MOZ_CO_MODULE)
+
+#######################################################################
+# Rules
+# 
+
+# Print out any options loaded from mozconfig.
+all build checkout clean depend distclean export install realclean::
+	@if test -f .mozconfig.out; then \
+	  cat .mozconfig.out; \
+	  rm -f .mozconfig.out; \
+	else true; \
+	fi
+
+ifdef _IS_FIRST_CHECKOUT
+all:: checkout build
+else
+all:: checkout depend build
+endif
+
+# Windows equivalents
+pull_all: checkout
+build_all: build
+clobber clobber_all: clean
+pull_and_build_all: checkout depend build
+
+# Do everything from scratch
+everything: checkout clean build
+
+####################################
+# CVS checkout
+#
+checkout::
+#	@: Backup the last checkout log.
+	@if test -f $(CVSCO_LOGFILE) ; then \
+	  mv $(CVSCO_LOGFILE) $(CVSCO_LOGFILE).old; \
+	else true; \
+	fi
+	@echo "checkout start: "`date` | tee $(CVSCO_LOGFILE)
+	@echo '$(CVSCO) mozilla/client.mk'; \
+        cd $(ROOTDIR); \
+	$(CVSCO) mozilla/client.mk && \
+	$(MAKE) -f mozilla/client.mk real_checkout
+
+real_checkout:
+#	@: Start the checkout. Split the output to the tty and a log file. \
+#	 : If it fails, touch an error file because "tee" hides the error.
+	@failed=.cvs-failed.tmp; rm -f $$failed*; \
+	cvs_co() { echo "$$@" ; \
+	  ("$$@" || touch $$failed) 2>&1 | tee -a $(CVSCO_LOGFILE) && \
+	  if test -f $$failed; then false; else true; fi; }; \
+	cvs_co $(CVSCO_NSPR) && \
+	cvs_co $(CVSCO_PSM) && \
+        cvs_co $(CVSCO_LDAPCSDK) && \
+	cvs_co $(CVSCO_SEAMONKEY)
+	@echo "checkout finish: "`date` | tee -a $(CVSCO_LOGFILE)
+#	@: Check the log for conflicts. ;
+	@conflicts=`egrep "^C " $(CVSCO_LOGFILE)` ;\
+	if test "$$conflicts" ; then \
+	  echo "$(MAKE): *** Conflicts during checkout." ;\
+	  echo "$$conflicts" ;\
+	  echo "$(MAKE): Refer to $(CVSCO_LOGFILE) for full log." ;\
+	  false; \
+	else true; \
+	fi
+
+
+####################################
+# Web configure
+
+WEBCONFIG_FILE  := $(HOME)/.mozconfig
+
+MOZCONFIG2CONFIGURATOR := build/autoconf/mozconfig2configurator
+webconfig:
+	@cd $(TOPSRCDIR); \
+	url=`$(MOZCONFIG2CONFIGURATOR) $(TOPSRCDIR)`; \
+	echo Running netscape with the following url: ;\
+	echo ;\
+	echo $$url ;\
+	netscape -remote "openURL($$url)" || netscape $$url ;\
+	echo ;\
+	echo   1. Fill out the form on the browser. ;\
+	echo   2. Save the results to $(WEBCONFIG_FILE)
+
+#####################################################
+# First Checkout
+
+ifdef _IS_FIRST_CHECKOUT
+# First time, do build target in a new process to pick up new files.
+build::
+	$(MAKE) -f $(TOPSRCDIR)/client.mk build
+else
+
+#####################################################
+# After First Checkout
+
+
+####################################
+# Configure
+
+CONFIG_STATUS := $(wildcard $(OBJDIR)/config.status)
+CONFIG_CACHE  := $(wildcard $(OBJDIR)/config.cache)
+
+ifdef RUN_AUTOCONF_LOCALLY
+EXTRA_CONFIG_DEPS := \
+	$(TOPSRCDIR)/aclocal.m4 \
+	$(TOPSRCDIR)/build/autoconf/gtk.m4 \
+	$(TOPSRCDIR)/build/autoconf/altoptions.m4 \
+	$(NULL)
+
+$(TOPSRCDIR)/configure: $(TOPSRCDIR)/configure.in $(EXTRA_CONFIG_DEPS)
+	@echo Generating $@ using autoconf
+	cd $(TOPSRCDIR); $(AUTOCONF)
+endif
+
+CONFIG_STATUS_DEPS_L10N := $(wildcard $(TOPSRCDIR)/l10n/makefiles.all)
+
+CONFIG_STATUS_DEPS := \
+	$(TOPSRCDIR)/configure \
+	$(TOPSRCDIR)/allmakefiles.sh \
+	$(TOPSRCDIR)/.mozconfig.mk \
+	$(wildcard $(TOPSRCDIR)/nsprpub/configure) \
+	$(wildcard $(TOPSRCDIR)/directory/c-sdk/ldap/configure) \
+	$(wildcard $(TOPSRCDIR)/mailnews/makefiles) \
+	$(CONFIG_STATUS_DEPS_L10N) \
+	$(wildcard $(TOPSRCDIR)/themes/makefiles) \
+	$(NULL)
+
+# configure uses the program name to determine @srcdir@. Calling it without
+#   $(TOPSRCDIR) will set @srcdir@ to "."; otherwise, it is set to the full
+#   path of $(TOPSRCDIR).
+ifeq ($(TOPSRCDIR),$(OBJDIR))
+  CONFIGURE := ./configure
+else
+  CONFIGURE := $(TOPSRCDIR)/configure
+endif
+
+$(OBJDIR)/Makefile $(OBJDIR)/config.status: $(CONFIG_STATUS_DEPS)
+	@if test ! -d $(OBJDIR); then $(MKDIR) $(OBJDIR); else true; fi
+	@echo cd $(OBJDIR);
+	@echo $(CONFIGURE)
+	@cd $(OBJDIR) && $(CONFIGURE_ENV_ARGS) $(CONFIGURE) \
+	  || ( echo "*** Fix above errors and then restart with\
+               \"$(MAKE) -f client.mk build\"" && exit 1 )
+	@touch $(OBJDIR)/Makefile
+
+ifdef CONFIG_STATUS
+$(OBJDIR)/config/autoconf.mk: $(TOPSRCDIR)/config/autoconf.mk.in
+	cd $(OBJDIR); \
+	  CONFIG_FILES=config/autoconf.mk ./config.status
+endif
+
+
+####################################
+# Depend
+
+depend:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
+	$(MOZ_MAKE) $@;
+
+####################################
+# Build it
+
+build::  $(OBJDIR)/Makefile $(OBJDIR)/config.status
+	$(MOZ_MAKE) export && $(MOZ_MAKE) install
+
+####################################
+# Other targets
+
+# Pass these target onto the real build system
+install export clean realclean distclean:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
+	$(MOZ_MAKE) $@
+
+cleansrcdir:
+	@cd $(TOPSRCDIR); \
+	if [ -f Makefile ]; then \
+	  $(MAKE) realclean && _skip_find=1; \
+	fi; \
+        if [ -f webshell/embed/gtk/Makefile ]; then \
+          $(MAKE) -C webshell/embed/gtk distclean; \
+        fi; \
+	if [ ! "$$_skip_find" ]; then \
+	  echo "Removing object files from srcdir..."; \
+	  rm -fr `find . -type d \( -name .deps -print -o -name CVS \
+	          -o -exec test ! -d {}/CVS \; \) -prune \
+	          -o \( -name '*.[ao]' -o -name '*.so' \) -type f -print`; \
+	fi; \
+	echo "Removing files generated by configure..."; \
+	build/autoconf/clean-config.sh;
+
+
+# (! IS_FIRST_CHECKOUT)
+endif
+
+.PHONY: checkout real_checkout depend build export install clean realclean distclean cleansrcdir pull_all build_all clobber clobber_all pull_and_build_all everything

mozilla/tools/tinderbox-configs/firefox/linux/CLOBBER

@@ -1,2 +0,0 @@
-Clobbering to pick up changes from bug 409803.
-

mozilla/tools/tinderbox-configs/firefox/linux/mozconfig

@@ -1,27 +0,0 @@
-#
-## hostname: fx-linux-tbox
-## uname: Linux fx-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
-#
-
-export CFLAGS="-gstabs+"
-export CXXFLAGS="-gstabs+"
-
-mk_add_options MOZ_CO_PROJECT=browser
-mk_add_options PROFILE_GEN_SCRIPT=@TOPSRCDIR@/build/profile_pageloader.pl
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging mozilla/tools/codesighs"
-ac_add_options --enable-application=browser
-
-ac_add_options --enable-update-channel=nightly
-ac_add_options --enable-update-packaging
-
-# Don't add explicit optimize flags here, set them in configure.in, see bug 407794.
-ac_add_options --enable-optimize
-ac_add_options --disable-debug
-ac_add_options --disable-tests
-#not yet
-#ac_add_options --enable-glitz
-
-ac_add_options --enable-codesighs
-
-CC=/tools/gcc/bin/gcc
-CXX=/tools/gcc/bin/g++

mozilla/tools/tinderbox-configs/firefox/linux/tinder-config.pl

@@ -1,269 +0,0 @@
-#
-## hostname: fx-linux-tbox
-## uname: Linux fx-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{CVS_RSH} = "ssh";
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-
-# To ensure Talkback client builds properly on some Linux boxen where LANG
-# is set to "en_US.UTF-8" by default, override that setting here by setting
-# it to "en_US.iso885915" (the setting on ocean).  Proper fix is to update
-# where xrestool is called in the build system so that 'LANG=C' in its
-# environment, according to bryner.
-$ENV{LANG} = "en_US.iso885915";
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "Firefox";
-$VendorName               = 'Mozilla';
-
-# CONFIG: $RunMozillaTests          = %runMozillaTests%;
-$RunMozillaTests          = 1;
-$RegxpcomTest             = 1;
-$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-$CodesizeTest             = 1;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 1;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-$LayoutPerformanceTest    = 0;  # Tp
-$DHTMLPerformanceTest     = 0;  # Tdhtml
-#$QATest                   = 0;  
-#$XULWindowOpenTest        = 0;  # Txul
-$StartupPerformanceTest   = 0;  # Ts
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-$GraphNameOverride        = 'fx-linux-tbox';
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-#$pageload_server          = "spider";  # localhost
-$pageload_server      = "pageload.build.mozilla.org";
-
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 45;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 15;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-#$Make          = 'gmake';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-#$blat           = 'c:/nstools/bin/blat';
-#$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-#$moz_cvsroot   = $ENV{CVSROOT};
-# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
-$moz_cvsroot   = ':ext:cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = 'obj-fx-trunk';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Nightly';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaTest';
-
-#$BuildName = '';
-#$BuildTag = '';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'firefox-bin';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = 14;
-$package_creation_path = "/browser/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "ffxbld";
-$ssh_key       = "'$ENV{HOME}/.ssh/ffxbld_dsa'";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-$ReleaseGroup  = "firefox";
-$ftp_path      = "/home/ftp/pub/firefox/nightly/experimental";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/experimental";
-$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
-$milestone     = "trunk";
-$notify_list   = 'build-announce@mozilla.org';
-$stub_installer = 0;
-$sea_installer = 0;
-$archive       = 1;
-$push_raw_xpis = 0;
-# CONFIG: $update_aus_host = '%ausServer%';
-$update_aus_host = 'aus2-staging.mozilla.org';
-$update_pushinfo = 0;
-$update_package = 1;
-$update_product = "Firefox";
-$update_version = "trunk";
-$update_platform = "Linux_x86-gcc3";
-$update_hash = "sha1";
-# CONFIG: $update_filehost = '%ftpServer%';
-$update_filehost = 'ftp.mozilla.org';
-$update_ver_file = 'browser/config/version.txt';
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'ffxbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_ffx';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/home/cltbld/.ssh/ffxbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/firefox/macosx/CLOBBER

@@ -1 +0,0 @@
-trigger a nightly to push the fix to bug 421841 to users

mozilla/tools/tinderbox-configs/firefox/macosx/mozconfig

@@ -1,28 +0,0 @@
-#
-## hostname: bm-xserve08.build.mozilla.org
-## uname: Darwin bm-xserve08.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
-#
-
-# symbols for breakpad
-export CFLAGS="-g -gfull"
-export CXXFLAGS="-g -gfull"
-
-. $topsrcdir/build/macosx/universal/mozconfig
-
-mk_add_options MOZ_MAKE_FLAGS="-j4"
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging mozilla/tools/codesighs"
-mk_add_options MOZ_CO_PROJECT="browser"
-mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/../build/universal
-
-ac_add_options --enable-application=browser
-ac_add_options --enable-update-channel=nightly
-# Don't add explicit optimize flags here, set them in configure.in, see bug 407794.
-ac_add_options --enable-optimize
-ac_add_options --disable-debug
-ac_add_options --disable-tests
-ac_add_options --enable-update-packaging
-
-# ac_add_options --enable-official-branding
-ac_add_app_options ppc --enable-prebinding
-
-ac_add_options --enable-codesighs

mozilla/tools/tinderbox-configs/firefox/macosx/tinder-config.pl

@@ -1,269 +0,0 @@
-#
-## hostname: bm-xserve08.build.mozilla.org
-## uname: Darwin bm-xserve08.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{NO_EM_RESTART} = "1";
-$ENV{DYLD_NO_FIX_PREBINDING} = "1";
-$ENV{LD_PREBIND_ALLOW_OVERLAP} = "1";
-$ENV{CVS_RSH} = "ssh";
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-
-$MacUniversalBinary = 1;
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = 'Minefield';
-$VendorName               = "";
-
-# CONFIG: $RunMozillaTests          = %runMozillaTests%;
-$RunMozillaTests          = 1;
-$RegxpcomTest             = 1;
-$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-$CodesizeTest             = 1;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-$LayoutPerformanceTest    = 0;  # Tp
-$LayoutPerformanceLocalTest   = 0;  # Tp2
-$DHTMLPerformanceTest     = 0;  # Tdhtml
-#$QATest                   = 0;  
-$XULWindowOpenTest        = 0;  # Txul
-$StartupPerformanceTest   = 0;  # Ts
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-
-$GraphNameOverride        = 'xserve08.build.mozilla.org_Fx-Trunk';
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-#$pageload_server          = "spider";  # localhost
-$pageload_server          = "pageload.build.mozilla.org";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-$AliveTestTimeout                 = 10;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-$LayoutPerformanceTestTimeout     = 300;  # entire test, seconds
-$LayoutPerformanceLocalTestTimeout     = 180;  # entire test, seconds
-$DHTMLPerformanceTestTimeout      = 180;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 15;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-#$Make          = 'gmake';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-#$blat           = 'c:/nstools/bin/blat';
-#$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-# CONFIG: $moz_cvsroot = '%mozillaCvsroot%';
-$moz_cvsroot = ':ext:cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = '../build/universal';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Universal Nightly';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaTest';
-
-#$BuildName = '';
-#$BuildTag = '';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'firefox-bin';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = "14";
-$package_creation_path = "/browser/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "ffxbld";
-$ssh_key       = "'$ENV{HOME}/.ssh/ffxbld_dsa'";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-$ReleaseGroup  = "firefox";
-$ftp_path      = "/home/ftp/pub/firefox/nightly/experimental";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/experimental";
-$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
-$milestone     = "trunk";
-$notify_list   = "build-announce\@mozilla.org";
-$stub_installer = 0;
-$sea_installer = 0;
-$archive       = 1;
-$push_raw_xpis = 0;
-# CONFIG: $update_aus_host = '%ausServer%';
-$update_aus_host = 'aus2-staging.mozilla.org';
-$update_package = 1;
-$update_product = "Firefox";
-$update_version = "trunk";
-$update_platform = "Darwin_Universal-gcc3";
-$update_hash = "sha1";
-# CONFIG: $update_filehost = '%ftpServer%';
-$update_filehost = 'ftp.mozilla.org';
-$update_ver_file = 'browser/config/version.txt';
-$update_pushinfo = 0;
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'ffxbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_ffx';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/Users/cltbld/.ssh/ffxbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';

mozilla/tools/tinderbox-configs/firefox/win32/CLOBBER

@@ -1 +0,0 @@
-Clobbering to pick up fixes from bug 419319.

mozilla/tools/tinderbox-configs/firefox/win32/mozconfig

@@ -1,20 +0,0 @@
-#
-## hostname: fx-win32-tbox
-## uname: MINGW32_NT-5.2 FX-WIN32-TBOX 1.0.11(0.46/3/2) 2007-01-12 12:05 i686 Msys
-#
-export CFLAGS="-GL -wd4624 -wd4952"
-export CXXFLAGS="-GL -wd4624 -wd4952"
-export LDFLAGS="-LTCG"
-
-mk_add_options MOZ_CO_PROJECT=browser
-mk_add_options MOZ_MAKE_FLAGS="-j5"
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
-mk_add_options PROFILE_GEN_SCRIPT='$(PYTHON) $(MOZ_OBJDIR)/_profile/pgo/profileserver.py'
-
-ac_add_options --enable-application=browser
-ac_add_options --enable-update-channel=nightly
-ac_add_options --enable-optimize
-ac_add_options --disable-debug
-ac_add_options --disable-tests
-ac_add_options --enable-update-packaging
-ac_add_options --enable-jemalloc

mozilla/tools/tinderbox-configs/firefox/win32/tinder-config.pl

@@ -1,264 +0,0 @@
-#
-## hostname: fx-win32-tbox
-## uname: MINGW32_NT-5.2 FX-WIN32-TBOX 1.0.11(0.46/3/2) 2007-01-12 12:05 i686 Msys
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{NO_EM_RESTART} = '1';
-$ENV{CVS_RSH} = "ssh";
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "Firefox";
-$VendorName               = "Mozilla";
-
-# CONFIG: $RunMozillaTests          = %runMozillaTests%;
-$RunMozillaTests          = 1;
-$RegxpcomTest             = 1;
-$AliveTest                = 1;
-$JavaTest                 = 0;
-$ViewerTest               = 0;
-$BloatTest                = 0;  # warren memory bloat test
-$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-$DomToTextConversionTest  = 0;  
-$XpcomGlueTest            = 0;
-$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-$MailBloatTest            = 0;
-$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-$LayoutPerformanceTest    = 0;  # Tp
-$DHTMLPerformanceTest     = 0;  # Tdhtml
-$QATest                   = 0;  
-$XULWindowOpenTest        = 0;  # Txul
-$StartupPerformanceTest   = 0;  # Ts
-$NeckoUnitTest            = 0;
-$RenderPerformanceTest    = 0;  # Tgfx
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-$GraphNameOverride        = 'fx-win32-tbox';
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-$pageload_server          = "pageload.build.mozilla.org";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 30;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-$LayoutPerformanceTestTimeout     = 800;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 20;    # seconds
-#$XULWindowOpenTestTimeout	      = 90;   # seconds
-#$NeckoUnitTestTimeout             = 30;    # seconds
-$RenderPerformanceTestTimeout     = 1800;  # seconds
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-$Make          = 'make';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-$blat           = '/d/mozilla-build/blat261/full/blat';
-#$use_blat       = 1;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-# CONFIG: $moz_cvsroot = '%mozillaCvsroot%';
-$moz_cvsroot = ':ext:cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = 'obj-fx-trunk';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Nightly';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaTest';
-
-#$BuildName = '';
-#$BuildTag = '';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'firefox.exe';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-$ProfiledBuild = 1;
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = "14";
-$package_creation_path = "/browser/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "ffxbld";
-$ssh_key       = "'$ENV{HOME}/.ssh/ffxbld_dsa'";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-$ReleaseGroup  = "firefox";
-$ftp_path      = "/home/ftp/pub/firefox/nightly/experimental";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/experimental";
-$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
-$milestone     = "trunk";
-$notify_list   = 'build-announce@mozilla.org';
-$stub_installer = 0;
-$sea_installer = 1;
-$archive       = 1;
-$push_raw_xpis = 0;
-# CONFIG: $update_aus_host = '%ausServer%';
-$update_aus_host = 'aus2-staging.mozilla.org';
-$update_package = 1;
-$update_product = "Firefox";
-$update_version = "trunk";
-$update_platform = "WINNT_x86-msvc";
-$update_hash = "sha1";
-# CONFIG: $update_filehost = '%ftpServer%';
-$update_filehost = 'ftp.mozilla.org';
-$update_ver_file = 'browser/config/version.txt';
-$update_pushinfo = 0;
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'ffxbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_ffx';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/c/Documents and Settings/cltbld/.ssh/ffxbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';