Set tag to SEAMONKEY_1_0b_RELEASE for SeaMonkey 1.0 beta

git-svn-id: svn://10.0.0.236/branches/SEAMONKEY_1_0b_MINIBRANCH@186256 18797224-902f-48f8-a5cc-f745e15eee43
This commit was manufactured by cvs2svn to create branch
2005-12-19 15:26:51 +00:00 · 2005-10-14 02:57:31 +00:00 · 2005-10-14 02:57:22 +00:00 · 2005-10-14 02:57:21 +00:00 · 2005-10-14 02:57:20 +00:00 · 2005-10-14 02:29:45 +00:00
10 changed files with 821 additions and 881 deletions
--- a/mozilla/client.mk
+++ b/mozilla/client.mk
@@ -0,0 +1,821 @@
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is
+# Netscape Communications Corporation.
+# Portions created by the Initial Developer are Copyright (C) 1998
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#   Stephen Lamm
+#   Benjamin Smedberg <bsmedberg@covad.net>
+#   Chase Phillips <chase@mozilla.org>
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either the GNU General Public License Version 2 or later (the "GPL"), or
+# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+# Build a mozilla application.
+#
+# To checkout and build a tree,
+#    1. cvs co mozilla/client.mk
+#    2. cd mozilla
+#    3. create your .mozconfig file with
+#       mk_add_options MOZ_CO_PROJECT=suite,browser,mail,minimo,xulrunner
+#    4. gmake -f client.mk 
+#
+# This script will pick up the CVSROOT from the CVS/Root file. If you wish
+# to use a different CVSROOT, you must set CVSROOT in your environment:
+#
+#   export CVSROOT=:pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
+#   export CVSROOT=:pserver:username%somedomain.org@cvs.mozilla.org:/cvsroot
+# 
+# You must specify which products/modules you wish to checkout, with
+#   MOZ_CO_PROJECT, MOZ_CO_MODULE, and BUILD_MODULES variables.
+#
+#   MOZ_CO_PROJECT possibilities include the following:
+#     suite (Seamonkey suite)
+#     browser (aka Firefox)
+#     mail (aka Thunderbird)
+#     minimo (small browser for devices)
+#     composer (standalone composer, aka NVU)
+#     calendar (aka Sunbird, use this to build the calendar extensions also)
+#     xulrunner
+#     macbrowser (aka Camino)
+#
+# Other common MOZ_CO_MODULE options include the following:
+#   mozilla/other-licenses/libart_lgpl
+#   mozilla/other-licenses/bsdiff
+#   mozilla/tools/codesighs
+#
+# Other targets (gmake -f client.mk [targets...]),
+#    checkout
+#    build
+#    clean (realclean is now the same as clean)
+#    distclean
+#
+# See http://www.mozilla.org/build/ for more information.
+#
+# Options:
+#   MOZ_OBJDIR           - Destination object directory
+#   MOZ_CO_DATE          - Date tag to use for checkout (default: none)
+#   MOZ_CO_LOCALES_DATE  - Date tag to use for locale checkout
+#                          (default: MOZ_CO_DATE)
+#   MOZ_CO_MODULE        - Module to checkout
+#   MOZ_CVS_FLAGS        - Flags to pass cvs (default: -q -z3)
+#   MOZ_CO_FLAGS         - Flags to pass after 'cvs co' (default: -P)
+#   MOZ_MAKE_FLAGS       - Flags to pass to $(MAKE)
+#   MOZ_CO_LOCALES       - localizations to pull (MOZ_CO_LOCALES="de-DE,pt-BR")
+#   MOZ_LOCALE_DIRS      - directories which contain localizations
+#   LOCALES_CVSROOT      - CVSROOT to use to pull localizations
+#
+
+AVAILABLE_PROJECTS = \
+  all \
+  suite \
+  toolkit \
+  browser \
+  mail \
+  minimo \
+  composer \
+  calendar \
+  xulrunner \
+  macbrowser \
+  $(NULL)
+
+MODULES_core :=                                 \
+  SeaMonkeyAll                                  \
+  mozilla/browser/config/version.txt            \
+  mozilla/mail/config/version.txt               \
+  mozilla/ipc/ipcd                              \
+  mozilla/modules/libpr0n                       \
+  mozilla/modules/libmar                        \
+  mozilla/modules/libbz2                        \
+  mozilla/accessible                            \
+  mozilla/security/manager                      \
+  mozilla/toolkit                               \
+  mozilla/storage                               \
+  mozilla/db/sqlite3                            \
+  $(NULL)
+
+LOCALES_core :=                                 \
+  netwerk                                       \
+  dom                                           \
+  $(NULL)
+
+MODULES_toolkit :=                              \
+  $(MODULES_core)                               \
+  mozilla/chrome                                \
+  $(NULL)
+
+LOCALES_toolkit :=                              \
+  $(LOCALES_core)                               \
+  toolkit                                       \
+  security/manager                              \
+  $(NULL)
+
+MODULES_suite :=                                \
+  $(MODULES_core)                               \
+  mozilla/suite                                 \
+  $(NULL)
+
+LOCALES_suite :=                                \
+  $(LOCALES_core)                               \
+  $(NULL)
+
+MODULES_browser :=                              \
+  $(MODULES_toolkit)                            \
+  mozilla/browser                               \
+  mozilla/other-licenses/branding/firefox       \
+  mozilla/other-licenses/7zstub/firefox         \
+  $(NULL)
+
+LOCALES_browser :=                              \
+  $(LOCALES_toolkit)                            \
+  browser                                       \
+  other-licenses/branding/firefox               \
+  $(NULL)
+
+BOOTSTRAP_browser := mozilla/browser/config/mozconfig
+
+MODULES_minimo :=                               \
+  $(MODULES_toolkit)                            \
+  mozilla/minimo                                \
+  $(NULL)
+
+MODULES_mail :=                                 \
+  $(MODULES_toolkit)                            \
+  mozilla/mail                                  \
+  mozilla/other-licenses/branding/thunderbird   \
+  mozilla/other-licenses/7zstub/thunderbird     \
+  $(NULL)
+
+LOCALES_mail :=                                 \
+  $(LOCALES_toolkit)                            \
+  mail                                          \
+  other-licenses/branding/thunderbird           \
+  editor/ui                                     \
+  $(NULL)
+
+BOOTSTRAP_mail := mozilla/mail/config/mozconfig
+
+MODULES_composer :=                             \
+  $(MODULES_toolkit)                            \
+  mozilla/composer                              \
+  $(NULL)
+
+MODULES_calendar :=                             \
+  $(MODULES_toolkit)                            \
+  mozilla/storage                               \
+  mozilla/db/sqlite3                            \
+  mozilla/calendar                              \
+  $(NULL)
+
+BOOTSTRAP_calendar := mozilla/calendar/sunbird/config/mozconfig
+
+MODULES_xulrunner :=                            \
+  $(MODULES_toolkit)                            \
+  mozilla/xulrunner                             \
+  $(NULL)
+
+LOCALES_xulrunner :=                            \
+  $(LOCALES_toolkit)                            \
+  $(NULL)
+
+BOOTSTRAP_xulrunner := mozilla/xulrunner/config/mozconfig
+
+MODULES_macbrowser :=                           \
+  $(MODULES_core)                               \
+  mozilla/camino                                \
+  $(NULL)
+
+BOOTSTRAP_macbrowser := mozilla/camino/config/mozconfig
+
+MODULES_all :=                                  \
+  mozilla/other-licenses/bsdiff                 \
+  mozilla/other-licenses/libart_lgpl            \
+  mozilla/tools/trace-malloc                    \
+  mozilla/tools/jprof                           \
+  mozilla/tools/codesighs                       \
+  mozilla/tools/update-packaging                \
+  mozilla/other-licenses/branding               \
+  mozilla/other-licenses/7zstub                 \
+  $(NULL)
+
+#######################################################################
+# Checkout Tags
+#
+# For branches, uncomment the MOZ_CO_TAG line with the proper tag,
+# and commit this file on that tag.
+MOZ_CO_TAG           = SEAMONKEY_1_0b_RELEASE
+NSPR_CO_TAG          = SEAMONKEY_1_0b_RELEASE
+NSS_CO_TAG           = SEAMONKEY_1_0b_RELEASE
+LDAPCSDK_CO_TAG      = SEAMONKEY_1_0b_RELEASE
+LOCALES_CO_TAG       = SEAMONKEY_1_0b_RELEASE
+
+BUILD_MODULES = all
+
+#######################################################################
+# Defines
+#
+CVS = cvs
+comma := ,
+
+CWD := $(shell pwd)
+
+ifeq "$(CWD)" "/"
+CWD   := /.
+endif
+
+ifneq (, $(wildcard client.mk))
+# Ran from mozilla directory
+ROOTDIR   := $(shell dirname $(CWD))
+TOPSRCDIR := $(CWD)
+else
+# Ran from mozilla/.. directory (?)
+ROOTDIR   := $(CWD)
+TOPSRCDIR := $(CWD)/mozilla
+endif
+
+# on os2, TOPSRCDIR may have two forward slashes in a row, which doesn't
+#  work;  replace first instance with one forward slash
+TOPSRCDIR := $(shell echo "$(TOPSRCDIR)" | sed -e 's%//%/%')
+
+ifndef TOPSRCDIR_MOZ
+TOPSRCDIR_MOZ=$(TOPSRCDIR)
+endif
+
+# if ROOTDIR equals only drive letter (i.e. "C:"), set to "/"
+DIRNAME := $(shell echo "$(ROOTDIR)" | sed -e 's/^.://')
+ifeq ($(DIRNAME),)
+ROOTDIR := /.
+endif
+
+AUTOCONF := autoconf
+MKDIR := mkdir
+SH := /bin/sh
+ifndef MAKE
+MAKE := gmake
+endif
+
+CONFIG_GUESS_SCRIPT := $(wildcard $(TOPSRCDIR)/build/autoconf/config.guess)
+ifdef CONFIG_GUESS_SCRIPT
+  CONFIG_GUESS = $(shell $(CONFIG_GUESS_SCRIPT))
+else
+  _IS_FIRST_CHECKOUT := 1
+endif
+
+####################################
+# CVS
+
+# Add the CVS root to CVS_FLAGS if needed
+CVS_ROOT_IN_TREE := $(shell cat $(TOPSRCDIR)/CVS/Root 2>/dev/null)
+ifneq ($(CVS_ROOT_IN_TREE),)
+ifneq ($(CVS_ROOT_IN_TREE),$(CVSROOT))
+  CVS_FLAGS := -d $(CVS_ROOT_IN_TREE)
+endif
+endif
+
+CVS_CO_DATE_FLAGS = $(if $(MOZ_CO_DATE),-D "$(MOZ_CO_DATE)")
+CVS_CO_LOCALES_DATE_FLAGS = $(if $(MOZ_CO_LOCALES_DATE),-D "$(MOZ_CO_LOCALES_DATE)")
+CVSCO = $(CVS) $(CVS_FLAGS) co $(MOZ_CO_FLAGS) $(if $(MOZ_CO_TAG),-r $(MOZ_CO_TAG)) $(CVS_CO_DATE_FLAGS)
+
+MOZ_CO_LOCALES_DATE ?= $(MOZ_CO_DATE)
+
+CVSCO_LOGFILE := $(ROOTDIR)/cvsco.log
+CVSCO_LOGFILE := $(shell echo $(CVSCO_LOGFILE) | sed s%//%/%)
+
+# if LOCALES_CVSROOT is not specified, set it here
+# (and let mozconfig override it)
+LOCALES_CVSROOT ?= :pserver:anonymous@cvs-mirror.mozilla.org:/l10n
+
+####################################
+# Load mozconfig Options
+
+# See build pages, http://www.mozilla.org/build/ for how to set up mozconfig.
+
+MOZCONFIG_LOADER := mozilla/build/autoconf/mozconfig2client-mk
+MOZCONFIG_FINDER := mozilla/build/autoconf/mozconfig-find 
+MOZCONFIG_MODULES := mozilla/build/unix/modules.mk mozilla/build/unix/uniq.pl
+run_for_side_effects := \
+  $(shell cd $(ROOTDIR); \
+     if test "$(_IS_FIRST_CHECKOUT)"; then \
+        $(CVSCO) $(MOZCONFIG_FINDER) $(MOZCONFIG_LOADER) $(MOZCONFIG_MODULES); \
+     else true; \
+     fi; \
+     $(MOZCONFIG_LOADER) $(TOPSRCDIR) mozilla/.mozconfig.mk > mozilla/.mozconfig.out)
+include $(TOPSRCDIR)/.mozconfig.mk
+include $(TOPSRCDIR)/build/unix/modules.mk
+
+####################################
+# Options that may come from mozconfig
+
+MOZ_PROJECT_LIST := $(subst $(comma), ,$(MOZ_CO_PROJECT))
+
+ifneq (,$(filter-out $(AVAILABLE_PROJECTS),$(MOZ_PROJECT_LIST)))
+$(error MOZ_CO_PROJECT contains an unrecognized project.)
+endif
+
+ifeq (all,$(filter all,$(MOZ_PROJECT_LIST)))
+  MOZ_PROJECT_LIST := $(AVAILABLE_PROJECTS)
+endif
+
+MOZ_MODULE_LIST := $(subst $(comma), ,$(MOZ_CO_MODULE)) $(foreach project,$(MOZ_PROJECT_LIST),$(MODULES_$(project)))
+LOCALE_DIRS := $(MOZ_LOCALE_DIRS) $(foreach project,$(MOZ_PROJECT_LIST),$(LOCALES_$(project)))
+
+MOZCONFIG_MODULES += $(foreach project,$(MOZ_PROJECT_LIST),$(BOOTSTRAP_$(project)))
+
+# Using $(sort) here because it also removes duplicate entries.
+MOZ_MODULE_LIST := $(sort $(MOZ_MODULE_LIST))
+LOCALE_DIRS := $(sort $(LOCALE_DIRS))
+MOZCONFIG_MODULES := $(sort $(MOZCONFIG_MODULES))
+
+# Change CVS flags if anonymous root is requested
+ifdef MOZ_CO_USE_MIRROR
+  CVS_FLAGS := -d :pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
+endif
+
+# MOZ_CVS_FLAGS - Basic CVS flags
+ifeq "$(origin MOZ_CVS_FLAGS)" "undefined"
+  CVS_FLAGS := $(CVS_FLAGS) -q -z 3 
+else
+  CVS_FLAGS := $(MOZ_CVS_FLAGS)
+endif
+
+ifdef MOZ_OBJDIR
+  OBJDIR := $(MOZ_OBJDIR)
+  MOZ_MAKE := $(MAKE) $(MOZ_MAKE_FLAGS) -C $(OBJDIR)
+else
+  OBJDIR := $(TOPSRCDIR)
+  MOZ_MAKE := $(MAKE) $(MOZ_MAKE_FLAGS)
+endif
+
+####################################
+# CVS defines for NSS
+#
+NSS_CO_MODULE =               \
+		mozilla/security/nss      \
+		mozilla/security/coreconf \
+		$(NULL)
+
+NSS_CO_FLAGS := -P
+ifdef MOZ_CO_FLAGS
+  NSS_CO_FLAGS := $(MOZ_CO_FLAGS)
+endif
+NSS_CO_FLAGS := $(NSS_CO_FLAGS) $(if $(NSS_CO_TAG),-r $(NSS_CO_TAG),-A)
+
+# Cannot pull static tags by date
+ifeq ($(NSS_CO_TAG),NSS_CLIENT_TAG)
+CVSCO_NSS = $(CVS) $(CVS_FLAGS) co $(NSS_CO_FLAGS) $(NSS_CO_MODULE)
+else
+CVSCO_NSS = $(CVS) $(CVS_FLAGS) co $(NSS_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(NSS_CO_MODULE)
+endif
+
+####################################
+# CVS defines for NSPR
+#
+NSPR_CO_MODULE = mozilla/nsprpub
+NSPR_CO_FLAGS := -P
+ifdef MOZ_CO_FLAGS
+  NSPR_CO_FLAGS := $(MOZ_CO_FLAGS)
+endif
+NSPR_CO_FLAGS := $(NSPR_CO_FLAGS) $(if $(NSPR_CO_TAG),-r $(NSPR_CO_TAG),-A)
+
+# Cannot pull static tags by date
+ifeq ($(NSPR_CO_TAG),NSPRPUB_CLIENT_TAG)
+CVSCO_NSPR = $(CVS) $(CVS_FLAGS) co $(NSPR_CO_FLAGS) $(NSPR_CO_MODULE)
+else
+CVSCO_NSPR = $(CVS) $(CVS_FLAGS) co $(NSPR_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(NSPR_CO_MODULE)
+endif
+
+####################################
+# CVS defines for the C LDAP SDK
+#
+LDAPCSDK_CO_MODULE = mozilla/directory/c-sdk
+LDAPCSDK_CO_FLAGS := -P
+ifdef MOZ_CO_FLAGS
+  LDAPCSDK_CO_FLAGS := $(MOZ_CO_FLAGS)
+endif
+LDAPCSDK_CO_FLAGS := $(LDAPCSDK_CO_FLAGS) $(if $(LDAPCSDK_CO_TAG),-r $(LDAPCSDK_CO_TAG),-A)
+CVSCO_LDAPCSDK = $(CVS) $(CVS_FLAGS) co $(LDAPCSDK_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(LDAPCSDK_CO_MODULE)
+
+####################################
+# CVS defines for standalone modules
+#
+ifeq ($(BUILD_MODULES),all)
+  CHECKOUT_STANDALONE := true
+  CHECKOUT_STANDALONE_NOSUBDIRS := true
+else
+  STANDALONE_CO_MODULE := $(filter-out $(NSPRPUB_DIR) security directory/c-sdk, $(BUILD_MODULE_CVS))
+  STANDALONE_CO_MODULE += allmakefiles.sh client.mk aclocal.m4 configure configure.in
+  STANDALONE_CO_MODULE += Makefile.in
+
+	MOZ_MODULE_LIST += $(addprefix mozilla/,$(STANDALONE_CO_MODULE))
+  NOSUBDIRS_MODULE := $(addprefix mozilla/,$(BUILD_MODULE_CVS_NS))
+
+ifeq (,$(filter $(NSPRPUB_DIR), $(BUILD_MODULE_CVS))$(MOZ_CO_PROJECT))
+  CVSCO_NSPR :=
+endif
+ifeq (,$(filter security security/manager, $(BUILD_MODULE_CVS))$(MOZ_CO_PROJECT))
+  CVSCO_NSS :=
+endif
+ifeq (,$(filter directory/c-sdk, $(BUILD_MODULE_CVS))$(MOZ_CO_PROJECT))
+  CVSCO_LDAPCSDK :=
+endif
+endif
+
+####################################
+# Error on obsolete variables.
+#
+
+ifdef MOZ_MAPINFO
+$(warning MOZ_MAPINFO is obsolete, use MOZ_CO_MODULE=mozilla/tools/codesighs instead.)
+MOZ_MODULE_LIST += mozilla/tools/codesighs
+endif
+ifdef MOZ_INTERNAL_LIBART_LGPL
+$(error MOZ_INTERNAL_LIBART_LGPL is obsolete, use MOZ_CO_MODULE=mozilla/other-licenses/libart_lgpl instead.)
+endif
+ifdef MOZ_PHOENIX
+$(warning MOZ_PHOENIX is obsolete.)
+MOZ_MODULE_LIST += $(MODULES_browser)
+# $(error MOZ_PHOENIX is obsolete, use MOZ_CO_PROJECT=browser and --enable-application=browser)
+endif
+ifdef MOZ_THUNDERBIRD
+$(warning MOZ_THUNDERBIRD is obsolete.)
+MOZ_MODULE_LIST += $(MODULES_mail)
+# $(error MOZ_THUNDERBIRD is obsolete, use MOZ_CO_PROJECT=mail and --enable-application=mail)
+endif
+
+###################################
+# Checkout main modules
+#
+
+# sort is used to remove duplicates.  SeaMonkeyAll is special-cased to
+# checkout last, because if you check it out first, there is a sticky
+# tag left over from checking out the LDAP SDK, which causes files in
+# the root directory to be missed.
+MOZ_MODULE_LIST := $(sort $(filter-out SeaMonkeyAll,$(MOZ_MODULE_LIST))) $(firstword $(filter SeaMonkeyAll,$(MOZ_MODULE_LIST)))
+
+MODULES_CO_FLAGS := -P
+ifdef MOZ_CO_FLAGS
+  MODULES_CO_FLAGS := $(MOZ_CO_FLAGS)
+endif
+MODULES_CO_FLAGS := $(MODULES_CO_FLAGS) $(if $(MOZ_CO_TAG),-r $(MOZ_CO_TAG),-A)
+
+CVSCO_MODULES_NS = $(CVS) $(CVS_FLAGS) co $(MODULES_CO_FLAGS) $(CVS_CO_DATE_FLAGS) -l $(NOSUBDIRS_MODULE)
+
+ifeq (,$(strip $(MOZ_MODULE_LIST)))
+FASTUPDATE_MODULES = $(error No modules or projects were specified. Use MOZ_CO_PROJECT to specify a project for checkout.)
+CHECKOUT_MODULES   = $(error No modules or projects were specified. Use MOZ_CO_PROJECT to specify a project for checkout.)
+else
+FASTUPDATE_MODULES := fast_update $(CVS) $(CVS_FLAGS) co $(MODULES_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(MOZ_MODULE_LIST)
+CHECKOUT_MODULES   := $(foreach module,$(MOZ_MODULE_LIST),cvs_co $(CVS) $(CVS_FLAGS) co $(MODULES_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(module);)
+endif
+ifeq (,$(NOSUBDIRS_MODULE))
+FASTUPDATE_MODULES_NS := true
+CHECKOUT_MODULES_NS   := true
+else
+FASTUPDATE_MODULES_NS := fast_update $(CVSCO_MODULES_NS)
+CHECKOUT_MODULES_NS   := cvs_co      $(CVSCO_MODULES_NS)
+endif
+
+###################################
+# CVS defines for locales
+#
+
+LOCALES_CO_FLAGS := -P
+ifdef MOZ_CO_FLAGS
+  LOCALES_CO_FLAGS := $(MOZ_CO_FLAGS)
+endif
+LOCALES_CO_FLAGS := $(LOCALES_CO_FLAGS) $(if $(LOCALES_CO_TAG),-r $(LOCALES_CO_TAG),-A)
+
+ifndef MOZ_CO_LOCALES
+FASTUPDATE_LOCALES := true
+CHECKOUT_LOCALES := true
+else
+
+override MOZ_CO_LOCALES := $(subst $(comma), ,$(MOZ_CO_LOCALES))
+
+ifeq (all,$(MOZ_CO_LOCALES))
+MOZCONFIG_MODULES += $(foreach project,$(MOZ_PROJECT_LIST),mozilla/$(project)/locales/all-locales)
+
+LOCALE_CO_DIRS := $(sort $(foreach project,$(MOZ_PROJECT_LIST),$(foreach locale,$(shell cat mozilla/$(project)/locales/all-locales),$(foreach dir,$(LOCALES_$(project)),l10n/$(locale)/$(dir)))))
+else # MOZ_CO_LOCALES != all
+LOCALE_CO_DIRS = $(sort $(foreach locale,$(MOZ_CO_LOCALES),$(foreach dir,$(LOCALE_DIRS),l10n/$(locale)/$(dir))))
+endif
+
+CVSCO_LOCALES := $(CVS) $(CVS_FLAGS) -d $(LOCALES_CVSROOT) co $(LOCALES_CO_FLAGS) $(CVS_CO_LOCALES_DATE_FLAGS) $(LOCALE_CO_DIRS)
+
+FASTUPDATE_LOCALES := fast_update $(CVSCO_LOCALES)
+CHECKOUT_LOCALES := cvs_co $(CVSCO_LOCALES)
+endif #MOZ_CO_LOCALES
+
+#######################################################################
+# Rules
+# 
+
+# Print out any options loaded from mozconfig.
+all build checkout clean depend distclean export libs install realclean::
+	@if test -f .mozconfig.out; then \
+	  cat .mozconfig.out; \
+	  rm -f .mozconfig.out; \
+	else true; \
+	fi
+
+ifdef _IS_FIRST_CHECKOUT
+all:: checkout build
+else
+all:: checkout alldep
+endif
+
+# Windows equivalents
+pull_all: checkout
+build_all: build
+build_all_dep: alldep
+build_all_depend: alldep
+clobber clobber_all: clean
+pull_and_build_all: checkout alldep
+
+# Do everything from scratch
+everything: checkout clean build
+
+####################################
+# CVS checkout
+#
+checkout::
+#	@: Backup the last checkout log.
+	@if test -f $(CVSCO_LOGFILE) ; then \
+	  mv $(CVSCO_LOGFILE) $(CVSCO_LOGFILE).old; \
+	else true; \
+	fi
+ifdef RUN_AUTOCONF_LOCALLY
+	@echo "Removing local configures" ; \
+	cd $(ROOTDIR) && \
+	$(RM) -f mozilla/configure mozilla/nsprpub/configure \
+		mozilla/directory/c-sdk/configure
+endif
+	@echo "checkout start: "`date` | tee $(CVSCO_LOGFILE)
+	@echo '$(CVSCO) $(CVS_CO_DATE_FLAGS) mozilla/client.mk $(MOZCONFIG_MODULES)'; \
+        cd $(ROOTDIR) && \
+	$(CVSCO) $(CVS_CO_DATE_FLAGS) mozilla/client.mk $(MOZCONFIG_MODULES)
+	@cd $(ROOTDIR) && $(MAKE) -f mozilla/client.mk real_checkout
+
+#	Start the checkout. Split the output to the tty and a log file.
+
+real_checkout:
+	@set -e; \
+	cvs_co() { set -e; echo "$$@" ; \
+	  "$$@" 2>&1 | tee -a $(CVSCO_LOGFILE); }; \
+	cvs_co $(CVSCO_NSPR); \
+	cvs_co $(CVSCO_NSS); \
+	cvs_co $(CVSCO_LDAPCSDK); \
+	$(CHECKOUT_MODULES) \
+	$(CHECKOUT_MODULES_NS); \
+	$(CHECKOUT_LOCALES);
+	@echo "checkout finish: "`date` | tee -a $(CVSCO_LOGFILE)
+# update the NSS checkout timestamp
+	@if test `egrep -c '^(U|C) mozilla/security/(nss|coreconf)' $(CVSCO_LOGFILE) 2>/dev/null` != 0; then \
+		touch $(TOPSRCDIR)/security/manager/.nss.checkout; \
+	fi
+#	@: Check the log for conflicts. ;
+	@conflicts=`egrep "^C " $(CVSCO_LOGFILE)` ;\
+	if test "$$conflicts" ; then \
+	  echo "$(MAKE): *** Conflicts during checkout." ;\
+	  echo "$$conflicts" ;\
+	  echo "$(MAKE): Refer to $(CVSCO_LOGFILE) for full log." ;\
+	  false; \
+	else true; \
+	fi
+ifdef RUN_AUTOCONF_LOCALLY
+	@echo Generating configures using $(AUTOCONF) ; \
+	cd $(TOPSRCDIR) && $(AUTOCONF) && \
+	cd $(TOPSRCDIR)/nsprpub && $(AUTOCONF) && \
+	cd $(TOPSRCDIR)/directory/c-sdk && $(AUTOCONF)
+endif
+
+fast-update:
+#	@: Backup the last checkout log.
+	@if test -f $(CVSCO_LOGFILE) ; then \
+	  mv $(CVSCO_LOGFILE) $(CVSCO_LOGFILE).old; \
+	else true; \
+	fi
+ifdef RUN_AUTOCONF_LOCALLY
+	@echo "Removing local configures" ; \
+	cd $(ROOTDIR) && \
+	$(RM) -f mozilla/configure mozilla/nsprpub/configure \
+		mozilla/directory/c-sdk/configure
+endif
+	@echo "checkout start: "`date` | tee $(CVSCO_LOGFILE)
+	@echo '$(CVSCO) mozilla/client.mk $(MOZCONFIG_MODULES)'; \
+        cd $(ROOTDIR) && \
+	$(CVSCO) mozilla/client.mk $(MOZCONFIG_MODULES)
+	@cd $(TOPSRCDIR) && \
+	$(MAKE) -f client.mk real_fast-update
+
+# Start the update. Split the output to the tty and a log file.
+real_fast-update:
+	@set -e; \
+	fast_update() { set -e; config/cvsco-fast-update.pl $$@ 2>&1 | tee -a $(CVSCO_LOGFILE); }; \
+	cvs_co() { set -e; echo "$$@" ; \
+	  "$$@" 2>&1 | tee -a $(CVSCO_LOGFILE); }; \
+	fast_update $(CVSCO_NSPR); \
+	cd $(ROOTDIR); \
+	cvs_co $(CVSCO_NSS); \
+	cd mozilla; \
+	fast_update $(CVSCO_LDAPCSDK); \
+	$(FASTUPDATE_MODULES); \
+	$(FASTUPDATE_MODULES_NS); \
+	$(FASTUPDATE_LOCALES);
+	@echo "fast_update finish: "`date` | tee -a $(CVSCO_LOGFILE)
+# update the NSS checkout timestamp
+	@if test `egrep -c '^(U|C) mozilla/security/(nss|coreconf)' $(CVSCO_LOGFILE) 2>/dev/null` != 0; then \
+		touch $(TOPSRCDIR)/security/manager/.nss.checkout; \
+	fi
+#	@: Check the log for conflicts. ;
+	@conflicts=`egrep "^C " $(CVSCO_LOGFILE)` ;\
+	if test "$$conflicts" ; then \
+	  echo "$(MAKE): *** Conflicts during fast-update." ;\
+	  echo "$$conflicts" ;\
+	  echo "$(MAKE): Refer to $(CVSCO_LOGFILE) for full log." ;\
+	  false; \
+	else true; \
+	fi
+ifdef RUN_AUTOCONF_LOCALLY
+	@echo Generating configures using $(AUTOCONF) ; \
+	cd $(TOPSRCDIR) && $(AUTOCONF) && \
+	cd $(TOPSRCDIR)/nsprpub && $(AUTOCONF) && \
+	cd $(TOPSRCDIR)/directory/c-sdk && $(AUTOCONF)
+endif
+
+####################################
+# Web configure
+
+WEBCONFIG_FILE  := $(HOME)/.mozconfig
+
+MOZCONFIG2CONFIGURATOR := build/autoconf/mozconfig2configurator
+webconfig:
+	@cd $(TOPSRCDIR); \
+	url=`$(MOZCONFIG2CONFIGURATOR) $(TOPSRCDIR)`; \
+	echo Running mozilla with the following url: ;\
+	echo ;\
+	echo $$url ;\
+	mozilla -remote "openURL($$url)" || \
+	netscape -remote "openURL($$url)" || \
+	mozilla $$url || \
+	netscape $$url ;\
+	echo ;\
+	echo   1. Fill out the form on the browser. ;\
+	echo   2. Save the results to $(WEBCONFIG_FILE)
+
+#####################################################
+# First Checkout
+
+ifdef _IS_FIRST_CHECKOUT
+# First time, do build target in a new process to pick up new files.
+build::
+	$(MAKE) -f $(TOPSRCDIR)/client.mk build
+else
+
+#####################################################
+# After First Checkout
+
+
+####################################
+# Configure
+
+CONFIG_STATUS := $(wildcard $(OBJDIR)/config.status)
+CONFIG_CACHE  := $(wildcard $(OBJDIR)/config.cache)
+
+ifdef RUN_AUTOCONF_LOCALLY
+EXTRA_CONFIG_DEPS := \
+	$(TOPSRCDIR)/aclocal.m4 \
+	$(wildcard $(TOPSRCDIR)/build/autoconf/*.m4) \
+	$(NULL)
+
+$(TOPSRCDIR)/configure: $(TOPSRCDIR)/configure.in $(EXTRA_CONFIG_DEPS)
+	@echo Generating $@ using autoconf
+	cd $(TOPSRCDIR); $(AUTOCONF)
+endif
+
+CONFIG_STATUS_DEPS := \
+	$(TOPSRCDIR)/configure \
+	$(TOPSRCDIR)/allmakefiles.sh \
+	$(TOPSRCDIR)/.mozconfig.mk \
+	$(wildcard $(TOPSRCDIR)/nsprpub/configure) \
+	$(wildcard $(TOPSRCDIR)/directory/c-sdk/configure) \
+	$(wildcard $(TOPSRCDIR)/mailnews/makefiles) \
+	$(wildcard $(TOPSRCDIR)/themes/makefiles) \
+	$(wildcard $(TOPSRCDIR)/config/milestone.txt) \
+	$(wildcard $(TOPSRCDIR)/config/chrome-versions.sh) \
+	$(NULL)
+
+# configure uses the program name to determine @srcdir@. Calling it without
+#   $(TOPSRCDIR) will set @srcdir@ to "."; otherwise, it is set to the full
+#   path of $(TOPSRCDIR).
+ifeq ($(TOPSRCDIR),$(OBJDIR))
+  CONFIGURE := ./configure
+else
+  CONFIGURE := $(TOPSRCDIR)/configure
+endif
+
+ifdef MOZ_TOOLS
+  CONFIGURE := $(TOPSRCDIR)/configure
+endif
+
+configure:
+	@if test ! -d $(OBJDIR); then $(MKDIR) $(OBJDIR); else true; fi
+	@echo cd $(OBJDIR);
+	@echo $(CONFIGURE) $(CONFIGURE_ARGS)
+	@cd $(OBJDIR) && $(CONFIGURE_ENV_ARGS) $(CONFIGURE) $(CONFIGURE_ARGS) \
+	  || ( echo "*** Fix above errors and then restart with\
+               \"$(MAKE) -f client.mk build\"" && exit 1 )
+	@touch $(OBJDIR)/Makefile
+
+$(OBJDIR)/Makefile $(OBJDIR)/config.status: $(CONFIG_STATUS_DEPS)
+	@$(MAKE) -f $(TOPSRCDIR)/client.mk configure
+
+ifdef CONFIG_STATUS
+$(OBJDIR)/config/autoconf.mk: $(TOPSRCDIR)/config/autoconf.mk.in
+	cd $(OBJDIR); \
+	  CONFIG_FILES=config/autoconf.mk ./config.status
+endif
+
+
+####################################
+# Depend
+
+depend:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
+	$(MOZ_MAKE) export && $(MOZ_MAKE) depend
+
+####################################
+# Build it
+
+build::  $(OBJDIR)/Makefile $(OBJDIR)/config.status
+	$(MOZ_MAKE)
+
+####################################
+# Profile-feedback build (gcc only)
+#  To use this, you should set the following variables in your mozconfig
+#    mk_add_options PROFILE_GEN_SCRIPT=/path/to/profile-script
+#
+#  The profile script should exercise the functionality to be included
+#  in the profile feedback.
+
+profiledbuild:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
+	$(MOZ_MAKE) MOZ_PROFILE_GENERATE=1
+	OBJDIR=${OBJDIR} $(PROFILE_GEN_SCRIPT)
+	$(MOZ_MAKE) clobber_all
+	$(MOZ_MAKE) MOZ_PROFILE_USE=1
+	find $(OBJDIR) -name "*.da" -exec rm {} \;
+
+####################################
+# Other targets
+
+# Pass these target onto the real build system
+install export libs clean realclean distclean alldep:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
+	$(MOZ_MAKE) $@
+
+cleansrcdir:
+	@cd $(TOPSRCDIR); \
+        if [ -f webshell/embed/gtk/Makefile ]; then \
+          $(MAKE) -C webshell/embed/gtk distclean; \
+        fi; \
+	if [ -f Makefile ]; then \
+	  $(MAKE) distclean ; \
+	else \
+	  echo "Removing object files from srcdir..."; \
+	  rm -fr `find . -type d \( -name .deps -print -o -name CVS \
+	          -o -exec test ! -d {}/CVS \; \) -prune \
+	          -o \( -name '*.[ao]' -o -name '*.so' \) -type f -print`; \
+	   build/autoconf/clean-config.sh; \
+	fi;
+
+# (! IS_FIRST_CHECKOUT)
+endif
+
+echo_objdir:
+	@echo $(OBJDIR)
+
+.PHONY: checkout real_checkout depend build export libs alldep install clean realclean distclean cleansrcdir pull_all build_all clobber clobber_all pull_and_build_all everything configure
--- a/mozilla/tools/tinderbox-configs/firefox/linux/CLOBBER
+++ b/mozilla/tools/tinderbox-configs/firefox/linux/CLOBBER
@@ -1,2 +0,0 @@
-Clobbering to pick up changes from bug 409803.
-
--- a/mozilla/tools/tinderbox-configs/firefox/linux/mozconfig
+++ b/mozilla/tools/tinderbox-configs/firefox/linux/mozconfig
@@ -1,27 +0,0 @@
-#
-## hostname: fx-linux-tbox
-## uname: Linux fx-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
-#
-
-export CFLAGS="-gstabs+"
-export CXXFLAGS="-gstabs+"
-
-mk_add_options MOZ_CO_PROJECT=browser
-mk_add_options PROFILE_GEN_SCRIPT=@TOPSRCDIR@/build/profile_pageloader.pl
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging mozilla/tools/codesighs"
-ac_add_options --enable-application=browser
-
-ac_add_options --enable-update-channel=nightly
-ac_add_options --enable-update-packaging
-
-# Don't add explicit optimize flags here, set them in configure.in, see bug 407794.
-ac_add_options --enable-optimize
-ac_add_options --disable-debug
-ac_add_options --disable-tests
-#not yet
-#ac_add_options --enable-glitz
-
-ac_add_options --enable-codesighs
-
-CC=/tools/gcc/bin/gcc
-CXX=/tools/gcc/bin/g++
--- a/mozilla/tools/tinderbox-configs/firefox/linux/tinder-config.pl
+++ b/mozilla/tools/tinderbox-configs/firefox/linux/tinder-config.pl
@@ -1,269 +0,0 @@
-#
-## hostname: fx-linux-tbox
-## uname: Linux fx-linux-tbox.build.mozilla.org 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{CVS_RSH} = "ssh";
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-
-# To ensure Talkback client builds properly on some Linux boxen where LANG
-# is set to "en_US.UTF-8" by default, override that setting here by setting
-# it to "en_US.iso885915" (the setting on ocean).  Proper fix is to update
-# where xrestool is called in the build system so that 'LANG=C' in its
-# environment, according to bryner.
-$ENV{LANG} = "en_US.iso885915";
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "Firefox";
-$VendorName               = 'Mozilla';
-
-# CONFIG: $RunMozillaTests          = %runMozillaTests%;
-$RunMozillaTests          = 1;
-$RegxpcomTest             = 1;
-$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-$CodesizeTest             = 1;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 1;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-$LayoutPerformanceTest    = 0;  # Tp
-$DHTMLPerformanceTest     = 0;  # Tdhtml
-#$QATest                   = 0;  
-#$XULWindowOpenTest        = 0;  # Txul
-$StartupPerformanceTest   = 0;  # Ts
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-$GraphNameOverride        = 'fx-linux-tbox';
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-#$pageload_server          = "spider";  # localhost
-$pageload_server      = "pageload.build.mozilla.org";
-
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 45;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-#$LayoutPerformanceTestTimeout     = 1200;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 15;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-#$Make          = 'gmake';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-#$blat           = 'c:/nstools/bin/blat';
-#$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-#$moz_cvsroot   = $ENV{CVSROOT};
-# CONFIG: $moz_cvsroot   = '%mozillaCvsroot%';
-$moz_cvsroot   = ':ext:cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = 'obj-fx-trunk';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Nightly';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaTest';
-
-#$BuildName = '';
-#$BuildTag = '';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'firefox-bin';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = 14;
-$package_creation_path = "/browser/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "ffxbld";
-$ssh_key       = "'$ENV{HOME}/.ssh/ffxbld_dsa'";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-$ReleaseGroup  = "firefox";
-$ftp_path      = "/home/ftp/pub/firefox/nightly/experimental";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/experimental";
-$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
-$milestone     = "trunk";
-$notify_list   = 'build-announce@mozilla.org';
-$stub_installer = 0;
-$sea_installer = 0;
-$archive       = 1;
-$push_raw_xpis = 0;
-# CONFIG: $update_aus_host = '%ausServer%';
-$update_aus_host = 'aus2-staging.mozilla.org';
-$update_pushinfo = 0;
-$update_package = 1;
-$update_product = "Firefox";
-$update_version = "trunk";
-$update_platform = "Linux_x86-gcc3";
-$update_hash = "sha1";
-# CONFIG: $update_filehost = '%ftpServer%';
-$update_filehost = 'ftp.mozilla.org';
-$update_ver_file = 'browser/config/version.txt';
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'ffxbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_ffx';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/home/cltbld/.ssh/ffxbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';
--- a/mozilla/tools/tinderbox-configs/firefox/macosx/CLOBBER
+++ b/mozilla/tools/tinderbox-configs/firefox/macosx/CLOBBER
@@ -1 +0,0 @@
-trigger a nightly to push the fix to bug 421841 to users
--- a/mozilla/tools/tinderbox-configs/firefox/macosx/mozconfig
+++ b/mozilla/tools/tinderbox-configs/firefox/macosx/mozconfig
@@ -1,28 +0,0 @@
-#
-## hostname: bm-xserve08.build.mozilla.org
-## uname: Darwin bm-xserve08.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
-#
-
-# symbols for breakpad
-export CFLAGS="-g -gfull"
-export CXXFLAGS="-g -gfull"
-
-. $topsrcdir/build/macosx/universal/mozconfig
-
-mk_add_options MOZ_MAKE_FLAGS="-j4"
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging mozilla/tools/codesighs"
-mk_add_options MOZ_CO_PROJECT="browser"
-mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/../build/universal
-
-ac_add_options --enable-application=browser
-ac_add_options --enable-update-channel=nightly
-# Don't add explicit optimize flags here, set them in configure.in, see bug 407794.
-ac_add_options --enable-optimize
-ac_add_options --disable-debug
-ac_add_options --disable-tests
-ac_add_options --enable-update-packaging
-
-# ac_add_options --enable-official-branding
-ac_add_app_options ppc --enable-prebinding
-
-ac_add_options --enable-codesighs
--- a/mozilla/tools/tinderbox-configs/firefox/macosx/tinder-config.pl
+++ b/mozilla/tools/tinderbox-configs/firefox/macosx/tinder-config.pl
@@ -1,269 +0,0 @@
-#
-## hostname: bm-xserve08.build.mozilla.org
-## uname: Darwin bm-xserve08.build.mozilla.org 8.8.4 Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386 i386 i386
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{NO_EM_RESTART} = "1";
-$ENV{DYLD_NO_FIX_PREBINDING} = "1";
-$ENV{LD_PREBIND_ALLOW_OVERLAP} = "1";
-$ENV{CVS_RSH} = "ssh";
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-
-$MacUniversalBinary = 1;
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = 'Minefield';
-$VendorName               = "";
-
-# CONFIG: $RunMozillaTests          = %runMozillaTests%;
-$RunMozillaTests          = 1;
-$RegxpcomTest             = 1;
-$AliveTest                = 1;
-#$JavaTest                 = 0;
-#$ViewerTest               = 0;
-#$BloatTest                = 0;  # warren memory bloat test
-#$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-#$DomToTextConversionTest  = 0;  
-#$XpcomGlueTest            = 0;
-$CodesizeTest             = 1;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-#$MailBloatTest            = 0;
-#$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-$LayoutPerformanceTest    = 0;  # Tp
-$LayoutPerformanceLocalTest   = 0;  # Tp2
-$DHTMLPerformanceTest     = 0;  # Tdhtml
-#$QATest                   = 0;  
-$XULWindowOpenTest        = 0;  # Txul
-$StartupPerformanceTest   = 0;  # Ts
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-
-$GraphNameOverride        = 'xserve08.build.mozilla.org_Fx-Trunk';
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-#$pageload_server          = "spider";  # localhost
-$pageload_server          = "pageload.build.mozilla.org";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-$AliveTestTimeout                 = 10;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-$LayoutPerformanceTestTimeout     = 300;  # entire test, seconds
-$LayoutPerformanceLocalTestTimeout     = 180;  # entire test, seconds
-$DHTMLPerformanceTestTimeout      = 180;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 15;    # seconds
-#$XULWindowOpenTestTimeout	      = 150;   # seconds
-
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-#$Make          = 'gmake';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-#$blat           = 'c:/nstools/bin/blat';
-#$use_blat       = 0;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-# CONFIG: $moz_cvsroot = '%mozillaCvsroot%';
-$moz_cvsroot = ':ext:cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = '../build/universal';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Universal Nightly';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaTest';
-
-#$BuildName = '';
-#$BuildTag = '';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'firefox-bin';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = "14";
-$package_creation_path = "/browser/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "ffxbld";
-$ssh_key       = "'$ENV{HOME}/.ssh/ffxbld_dsa'";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-$ReleaseGroup  = "firefox";
-$ftp_path      = "/home/ftp/pub/firefox/nightly/experimental";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/experimental";
-$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
-$milestone     = "trunk";
-$notify_list   = "build-announce\@mozilla.org";
-$stub_installer = 0;
-$sea_installer = 0;
-$archive       = 1;
-$push_raw_xpis = 0;
-# CONFIG: $update_aus_host = '%ausServer%';
-$update_aus_host = 'aus2-staging.mozilla.org';
-$update_package = 1;
-$update_product = "Firefox";
-$update_version = "trunk";
-$update_platform = "Darwin_Universal-gcc3";
-$update_hash = "sha1";
-# CONFIG: $update_filehost = '%ftpServer%';
-$update_filehost = 'ftp.mozilla.org';
-$update_ver_file = 'browser/config/version.txt';
-$update_pushinfo = 0;
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'ffxbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_ffx';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/Users/cltbld/.ssh/ffxbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';
--- a/mozilla/tools/tinderbox-configs/firefox/win32/CLOBBER
+++ b/mozilla/tools/tinderbox-configs/firefox/win32/CLOBBER
@@ -1 +0,0 @@
-Clobbering to pick up fixes from bug 419319.
--- a/mozilla/tools/tinderbox-configs/firefox/win32/mozconfig
+++ b/mozilla/tools/tinderbox-configs/firefox/win32/mozconfig
@@ -1,20 +0,0 @@
-#
-## hostname: fx-win32-tbox
-## uname: MINGW32_NT-5.2 FX-WIN32-TBOX 1.0.11(0.46/3/2) 2007-01-12 12:05 i686 Msys
-#
-export CFLAGS="-GL -wd4624 -wd4952"
-export CXXFLAGS="-GL -wd4624 -wd4952"
-export LDFLAGS="-LTCG"
-
-mk_add_options MOZ_CO_PROJECT=browser
-mk_add_options MOZ_MAKE_FLAGS="-j5"
-mk_add_options MOZ_CO_MODULE="mozilla/tools/update-packaging"
-mk_add_options PROFILE_GEN_SCRIPT='$(PYTHON) $(MOZ_OBJDIR)/_profile/pgo/profileserver.py'
-
-ac_add_options --enable-application=browser
-ac_add_options --enable-update-channel=nightly
-ac_add_options --enable-optimize
-ac_add_options --disable-debug
-ac_add_options --disable-tests
-ac_add_options --enable-update-packaging
-ac_add_options --enable-jemalloc
--- a/mozilla/tools/tinderbox-configs/firefox/win32/tinder-config.pl
+++ b/mozilla/tools/tinderbox-configs/firefox/win32/tinder-config.pl
@@ -1,264 +0,0 @@
-#
-## hostname: fx-win32-tbox
-## uname: MINGW32_NT-5.2 FX-WIN32-TBOX 1.0.11(0.46/3/2) 2007-01-12 12:05 i686 Msys
-#
-
-#- tinder-config.pl - Tinderbox configuration file.
-#-    Uncomment the variables you need to set.
-#-    The default values are the same as the commented variables.
-
-$ENV{NO_EM_RESTART} = '1';
-$ENV{CVS_RSH} = "ssh";
-$ENV{MOZ_CRASHREPORTER_NO_REPORT} = '1';
-
-# $ENV{MOZ_PACKAGE_MSI}
-#-----------------------------------------------------------------------------
-#  Default: 0
-#   Values: 0 | 1
-#  Purpose: Controls whether a MSI package is made.
-# Requires: Windows and a local MakeMSI installation.
-#$ENV{MOZ_PACKAGE_MSI} = 0;
-
-# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
-#-----------------------------------------------------------------------------
-#  Default: scp
-#   Values: scp | rsync
-#  Purpose: Use scp or rsync to transfer symbols to the Talkback server.
-# Requires: The selected type requires the command be available both locally
-#           and on the Talkback server.
-#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
-
-#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
-$BuildAdministrator = 'build@mozilla.org';
-#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
-#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
-
-#- You'll need to change these to suit your machine's needs
-#$DisplayServer = ':0.0';
-
-#- Default values of command-line opts
-#-
-#$BuildDepend       = 1;      # Depend or Clobber
-#$BuildDebug        = 0;      # Debug or Opt (Darwin)
-#$ReportStatus      = 1;      # Send results to server, or not
-#$ReportFinalStatus = 1;      # Finer control over $ReportStatus.
-#$UseTimeStamp      = 1;      # Use the CVS 'pull-by-timestamp' option, or not
-#$BuildOnce         = 0;      # Build once, don't send results to server
-#$TestOnly          = 0;      # Only run tests, don't pull/build
-#$BuildEmbed        = 0;      # After building seamonkey, go build embed app.
-#$SkipMozilla       = 0;      # Use to debug post-mozilla.pl scripts.
-#$BuildLocales      = 0;      # Do l10n packaging?
-
-# Tests
-$CleanProfile             = 1;
-#$ResetHomeDirForTests     = 1;
-$ProductName              = "Firefox";
-$VendorName               = "Mozilla";
-
-# CONFIG: $RunMozillaTests          = %runMozillaTests%;
-$RunMozillaTests          = 1;
-$RegxpcomTest             = 1;
-$AliveTest                = 1;
-$JavaTest                 = 0;
-$ViewerTest               = 0;
-$BloatTest                = 0;  # warren memory bloat test
-$BloatTest2               = 0;  # dbaron memory bloat test, require tracemalloc
-$DomToTextConversionTest  = 0;  
-$XpcomGlueTest            = 0;
-$CodesizeTest             = 0;  # Z,  require mozilla/tools/codesighs
-$EmbedCodesizeTest        = 0;  # mZ, require mozilla/tools/codesigns
-$MailBloatTest            = 0;
-$EmbedTest                = 0;  # Assumes you wanted $BuildEmbed=1
-$LayoutPerformanceTest    = 0;  # Tp
-$DHTMLPerformanceTest     = 0;  # Tdhtml
-$QATest                   = 0;  
-$XULWindowOpenTest        = 0;  # Txul
-$StartupPerformanceTest   = 0;  # Ts
-$NeckoUnitTest            = 0;
-$RenderPerformanceTest    = 0;  # Tgfx
-
-$TestsPhoneHome           = 0;  # Should test report back to server?
-$GraphNameOverride        = 'fx-win32-tbox';
-
-# $results_server
-#----------------------------------------------------------------------------
-# Server on which test results will be accessible.  This was originally tegu,
-# then became axolotl.  Once we moved services from axolotl, it was time
-# to give this service its own hostname to make future transitions easier.
-# - cmp@mozilla.org
-#$results_server           = "build-graphs.mozilla.org";
-
-$pageload_server          = "pageload.build.mozilla.org";  # localhost
-
-#
-# Timeouts, values are in seconds.
-#
-#$CVSCheckoutTimeout               = 3600;
-#$CreateProfileTimeout             = 45;
-#$RegxpcomTestTimeout              = 120;
-
-#$AliveTestTimeout                 = 30;
-#$ViewerTestTimeout                = 45;
-#$EmbedTestTimeout                 = 45;
-#$BloatTestTimeout                 = 120;   # seconds
-#$MailBloatTestTimeout             = 120;   # seconds
-#$JavaTestTimeout                  = 45;
-#$DomTestTimeout	                  = 45;    # seconds
-#$XpcomGlueTestTimeout             = 15;
-#$CodesizeTestTimeout              = 900;     # seconds
-#$CodesizeTestType                 = "auto";  # {"auto"|"base"}
-$LayoutPerformanceTestTimeout     = 800;  # entire test, seconds
-#$DHTMLPerformanceTestTimeout      = 1200;  # entire test, seconds
-#$QATestTimeout                    = 1200;   # entire test, seconds
-#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
-#$StartupPerformanceTestTimeout    = 20;    # seconds
-#$XULWindowOpenTestTimeout	      = 90;   # seconds
-#$NeckoUnitTestTimeout             = 30;    # seconds
-$RenderPerformanceTestTimeout     = 1800;  # seconds
-
-#$MozConfigFileName = 'mozconfig';
-
-#$UseMozillaProfile = 1;
-#$MozProfileName = 'default';
-
-#- Set these to what makes sense for your system
-$Make          = 'make';       # Must be GNU make
-#$MakeOverrides = '';
-#$mail          = '/bin/mail';
-#$CVS           = 'cvs -q';
-#$CVSCO         = 'checkout -P';
-
-# win32 usually doesn't have /bin/mail
-$blat           = '/d/mozilla-build/blat261/full/blat';
-#$use_blat       = 1;
-
-# Set moz_cvsroot to something like:
-# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
-# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
-#
-# Note that win32 may not need \@, depends on ' or ".
-# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
-
-# CONFIG: $moz_cvsroot = '%mozillaCvsroot%';
-$moz_cvsroot = ':ext:cltbld@cvs.mozilla.org:/cvsroot';
-
-#- Set these proper values for your tinderbox server
-#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
-
-# Allow for non-client builds, e.g. camino.
-#$moz_client_mk = 'client.mk';
-
-#- Set if you want to build in a separate object tree
-$ObjDir = 'obj-fx-trunk';
-
-# Extra build name, if needed.
-$BuildNameExtra = 'Nightly';
-
-# User comment, eg. ip address for dhcp builds.
-# ex: $UserComment = "ip = 208.12.36.108";
-#$UserComment = 0;
-
-#-
-#- The rest should not need to be changed
-#-
-
-#- Minimum wait period from start of build to start of next build in minutes.
-#$BuildSleep = 10;
-
-#- Until you get the script working. When it works,
-#- change to the tree you're actually building
-# CONFIG: $BuildTree  = '%buildTree%';
-$BuildTree  = 'MozillaTest';
-
-#$BuildName = '';
-#$BuildTag = '';
-#$BuildConfigDir = 'mozilla/config';
-#$Topsrcdir = 'mozilla';
-
-$BinaryName = 'firefox.exe';
-
-#
-# For embedding app, use:
-#$EmbedBinaryName = 'TestGtkEmbed';
-#$EmbedDistDir    = 'dist/bin'
-
-
-#$ShellOverride = ''; # Only used if the default shell is too stupid
-#$ConfigureArgs = '';
-#$ConfigureEnvArgs = '';
-#$Compiler = 'gcc';
-#$NSPRArgs = '';
-#$ShellOverride = '';
-
-$ProfiledBuild = 1;
-# Release build options
-$ReleaseBuild  = 1;
-$shiptalkback  = 0;
-$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
-$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
-$build_hour    = "14";
-$package_creation_path = "/browser/installer";
-# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
-$ssh_version   = "2";
-# CONFIG: $ssh_user      = "%sshUser%";
-$ssh_user      = "ffxbld";
-$ssh_key       = "'$ENV{HOME}/.ssh/ffxbld_dsa'";
-# CONFIG: $ssh_server    = "%sshServer%";
-$ssh_server    = "stage-old.mozilla.org";
-$ReleaseGroup  = "firefox";
-$ftp_path      = "/home/ftp/pub/firefox/nightly/experimental";
-$url_path      = "http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/experimental";
-$tbox_ftp_path = "/home/ftp/pub/firefox/tinderbox-builds";
-$tbox_url_path = "http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds";
-$milestone     = "trunk";
-$notify_list   = 'build-announce@mozilla.org';
-$stub_installer = 0;
-$sea_installer = 1;
-$archive       = 1;
-$push_raw_xpis = 0;
-# CONFIG: $update_aus_host = '%ausServer%';
-$update_aus_host = 'aus2-staging.mozilla.org';
-$update_package = 1;
-$update_product = "Firefox";
-$update_version = "trunk";
-$update_platform = "WINNT_x86-msvc";
-$update_hash = "sha1";
-# CONFIG: $update_filehost = '%ftpServer%';
-$update_filehost = 'ftp.mozilla.org';
-$update_ver_file = 'browser/config/version.txt';
-$update_pushinfo = 0;
-$crashreporter_buildsymbols = 1;
-$crashreporter_pushsymbols = 1;
-# CONFIG: $ENV{'SYMBOL_SERVER_HOST'}    = '%symbolServer%';
-$ENV{'SYMBOL_SERVER_HOST'}    = 'dm-symbolpush01.mozilla.org';
-# CONFIG: $ENV{'SYMBOL_SERVER_USER'}    = '%symbolServerUser%';
-$ENV{'SYMBOL_SERVER_USER'}    = 'ffxbld';
-# CONFIG: $ENV{'SYMBOL_SERVER_PATH'}    = '%symbolServerPath%';
-$ENV{'SYMBOL_SERVER_PATH'}    = '/mnt/netapp/breakpad/symbols_ffx';
-# CONFIG: $ENV{'SYMBOL_SERVER_SSH_KEY'} = '%symbolServerKey%';
-$ENV{'SYMBOL_SERVER_SSH_KEY'} = '/c/Documents and Settings/cltbld/.ssh/ffxbld_dsa';
-
-# Reboot the OS at the end of build-and-test cycle. This is primarily
-# intended for Win9x, which can't last more than a few cycles before
-# locking up (and testing would be suspect even after a couple of cycles).
-# Right now, there is only code to force the reboot for Win9x, so even
-# setting this to 1, will not have an effect on other platforms. Setting
-# up win9x to automatically logon and begin running tinderbox is left 
-# as an exercise to the reader. 
-#$RebootSystem = 0;
-
-# LogCompression specifies the type of compression used on the log file.
-# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
-# for 'gzip' or 'bzip2' are in the user's path before setting this
-# option.
-#$LogCompression = '';
-
-# LogEncoding specifies the encoding format used for the logs. Valid
-# options are 'base64', and 'uuencode'. If $LogCompression is set above,
-# this needs to be set to 'base64' or 'uuencode' to ensure that the
-# binary data is transferred properly.
-#$LogEncoding = '';
-
-# Prevent Extension Manager from spawning child processes during tests
-# - processes that tbox scripts cannot kill. 
-#$ENV{NO_EM_RESTART} = '1';
				`@@ -1,2 +0,0 @@`
				`Clobbering to pick up changes from bug 409803.`
				`@@ -1 +0,0 @@`
				`trigger a nightly to push the fix to bug 421841 to users`
				`@@ -1 +0,0 @@`
				`Clobbering to pick up fixes from bug 419319.`