Compare commits

..

2 Commits

Author SHA1 Message Date
fur%netscape.com
1c43d4984f This is a copy of regalloc_code2_BRANCH from Netscape's private repository,
as it existed in January of 1998.


git-svn-id: svn://10.0.0.236/branches/regalloc_code2_BRANCH@22571 18797224-902f-48f8-a5cc-f745e15eee43
1999-03-02 16:12:08 +00:00
(no author)
cfe021ff88 This commit was manufactured by cvs2svn to create branch
'regalloc_code2_BRANCH'.

git-svn-id: svn://10.0.0.236/branches/regalloc_code2_BRANCH@22567 18797224-902f-48f8-a5cc-f745e15eee43
1999-03-02 15:57:58 +00:00
38 changed files with 5324 additions and 498 deletions

View File

@@ -0,0 +1,134 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "Fundamentals.h"
#include "BitSet.h"
// Return the next bit after index set to true or -1 if none.
//
Int32 BitSet::nextOne(Int32 pos) const
{
++pos;
if (pos < 0 || Uint32(pos) >= universeSize)
return -1;
Uint32 offset = getWordOffset(pos);
Uint8 index = getBitOffset(pos);
Word* ptr = &word[offset];
Word currentWord = *ptr++ >> index;
if (currentWord != Word(0)) {
while ((currentWord & Word(1)) == 0) {
++index;
currentWord >>= 1;
}
return (offset << nBitsInWordLog2) + index;
}
Word* limit = &word[getSizeInWords(universeSize)];
while (ptr < limit) {
++offset;
currentWord = *ptr++;
if (currentWord != Word(0)) {
index = 0;
while ((currentWord & Word(1)) == 0) {
++index;
currentWord >>= 1;
}
return (offset << nBitsInWordLog2) + index;
}
}
return -1;
}
// Return the next bit after index set to false or -1 if none.
//
Int32 BitSet::nextZero(Int32 pos) const
{
++pos;
if (pos < 0 || Uint32(pos) >= universeSize)
return -1;
Uint32 offset = getWordOffset(pos);
Uint8 index = getBitOffset(pos);
Word* ptr = &word[offset];
Word currentWord = *ptr++ >> index;
if (currentWord != Word(~0)) {
for (; index < nBitsInWord; ++index) {
if ((currentWord & Word(1)) == 0) {
Int32 ret = (offset << nBitsInWordLog2) + index;
return (Uint32(ret) < universeSize) ? ret : -1;
}
currentWord >>= 1;
}
}
Word* limit = &word[getSizeInWords(universeSize)];
while (ptr < limit) {
++offset;
currentWord = *ptr++;
if (currentWord != Word(~0)) {
for (index = 0; index < nBitsInWord; ++index) {
if ((currentWord & Word(1)) == 0) {
Int32 ret = (offset << nBitsInWordLog2) + index;
return (Uint32(ret) < universeSize) ? ret : -1;
}
currentWord >>= 1;
}
}
}
return -1;
}
#ifdef DEBUG_LOG
// Print the set.
//
void BitSet::printPretty(LogModuleObject log)
{
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("[ "));
for (Int32 i = firstOne(); i != -1; i = nextOne(i)) {
Int32 currentBit = i;
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("%d", currentBit));
Int32 nextBit = nextOne(currentBit);
if (nextBit != currentBit + 1) {
UT_OBJECTLOG(log, PR_LOG_ALWAYS, (" "));
continue;
}
while ((nextBit != -1) && (nextBit == (currentBit + 1))) {
currentBit = nextBit;
nextBit = nextOne(nextBit);
}
if (currentBit > (i+1))
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("-%d ", currentBit));
else
UT_OBJECTLOG(log, PR_LOG_ALWAYS, (" %d ", currentBit));
i = currentBit;
}
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("]\n"));
}
#endif // DEBUG_LOG

View File

@@ -0,0 +1,195 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _BITSET_H_
#define _BITSET_H_
#include "Fundamentals.h"
#include "LogModule.h"
#include "Pool.h"
#include <string.h>
//------------------------------------------------------------------------------
// BitSet -
class BitSet
{
private:
#if (PR_BITS_PER_WORD == 64)
typedef Uint64 Word;
#elif (PR_BITS_PER_WORD == 32)
typedef Uint32 Word;
#endif
static const nBitsInWord = PR_BITS_PER_WORD;
static const nBytesInWord = PR_BYTES_PER_WORD;
static const nBitsInWordLog2 = PR_BITS_PER_WORD_LOG2;
static const nBytesInWordLog2 = PR_BYTES_PER_WORD_LOG2;
// Return the number of Word need to store the universe.
static Uint32 getSizeInWords(Uint32 sizeOfUniverse) {return (sizeOfUniverse + (nBitsInWord - 1)) >> nBitsInWordLog2;}
// Return the given element offset in its containing Word.
static Uint32 getBitOffset(Uint32 element) {return element & (nBitsInWord - 1);}
// Return the Word offset for the given element int the universe.
static Uint32 getWordOffset(Uint32 element) {return element >> nBitsInWordLog2;}
// Return the mask for the given bit index.
static Word getMask(Uint8 index) {return Word(1) << index;}
private:
Uint32 universeSize; // Size of the universe
Word* word; // universe memory.
private:
// No copy constructor.
BitSet(const BitSet&);
// Check if the given set's universe is of the same size than this universe.
void checkUniverseCompatibility(const BitSet& set) const {assert(set.universeSize == universeSize);}
// Check if pos is valid for this set's universe.
void checkMember(Int32 pos) const {assert(pos >=0 && Uint32(pos) < universeSize);}
public:
// Create a bitset of universeSize bits.
BitSet(Pool& pool, Uint32 universeSize) : universeSize(universeSize) {word = new(pool) Word[getSizeInWords(universeSize)]; clear();}
// Return the size of this bitset.
Uint32 getSize() const {return universeSize;}
// Clear the bitset.
void clear() {memset(word, 0x00, getSizeInWords(universeSize) << nBytesInWordLog2);}
// Clear the bit at index.
void clear(Uint32 index) {checkMember(index); word[getWordOffset(index)] &= ~getMask(index);}
// Set the bitset.
void set() {memset(word, 0xFF, getSizeInWords(universeSize) << nBytesInWordLog2);}
// Set the bit at index.
void set(Uint32 index) {checkMember(index); word[getWordOffset(index)] |= getMask(index);}
// Return true if the bit at index is set.
bool test(Uint32 index) const {checkMember(index); return (word[getWordOffset(index)] & getMask(index)) != 0;}
// Union with the given bitset.
inline void or(const BitSet& set);
// Intersection with the given bitset.
inline void and(const BitSet& set);
// Difference with the given bitset.
inline void difference(const BitSet& set);
// Copy set.
inline BitSet& operator = (const BitSet& set);
// Return true if the bitset are identical.
friend bool operator == (const BitSet& set1, const BitSet& set2);
// Return true if the bitset are different.
friend bool operator != (const BitSet& set1, const BitSet& set2);
// Logical operators.
BitSet& operator |= (const BitSet& set) {or(set); return *this;}
BitSet& operator &= (const BitSet& set) {and(set); return *this;}
BitSet& operator -= (const BitSet& set) {difference(set); return *this;}
// Return the first bit at set to true or -1 if none.
Int32 firstOne() const {return nextOne(-1);}
// Return the next bit after index set to true or -1 if none.
Int32 nextOne(Int32 pos) const;
// Return the first bit at set to false or -1 if none.
Int32 firstZero() const {return nextZero(-1);}
// Return the next bit after index set to false or -1 if none.
Int32 nextZero(Int32 pos) const;
// Iterator to conform with the set API.
typedef Int32 iterator;
// Return true if the walk is ordered.
static bool isOrdered() {return true;}
// Return the iterator for the first element of this set.
iterator begin() const {return firstOne();}
// Return the next iterator.
iterator advance(iterator pos) const {return nextOne(pos);}
// Return true if the iterator is at the end of the set.
bool done(iterator pos) const {return pos == -1;}
// Return the element corresponding to the given iterator.
Uint32 get(iterator pos) const {return pos;}
#ifdef DEBUG_LOG
// Print the set.
void printPretty(LogModuleObject log);
#endif // DEBUG_LOG
};
// Union with the given bitset.
//
inline void BitSet::or(const BitSet& set)
{
checkUniverseCompatibility(set);
Word* src = set.word;
Word* dst = word;
Word* limit = &src[getSizeInWords(universeSize)];
while (src < limit)
*dst++ |= *src++;
}
// Intersection with the given bitset.
//
inline void BitSet::and(const BitSet& set)
{
checkUniverseCompatibility(set);
Word* src = set.word;
Word* dst = word;
Word* limit = &src[getSizeInWords(universeSize)];
while (src < limit)
*dst++ &= *src++;
}
// Difference with the given bitset.
//
inline void BitSet::difference(const BitSet& set)
{
checkUniverseCompatibility(set);
Word* src = set.word;
Word* dst = word;
Word* limit = &src[getSizeInWords(universeSize)];
while (src < limit)
*dst++ &= ~*src++;
}
// Copy the given set into this set.
//
inline BitSet& BitSet::operator = (const BitSet& set)
{
checkUniverseCompatibility(set);
if (this != &set)
memcpy(word, set.word, getSizeInWords(universeSize) << nBytesInWordLog2);
return *this;
}
// Return true if the given set is identical to this set.
inline bool operator == (const BitSet& set1, const BitSet& set2)
{
set1.checkUniverseCompatibility(set2);
if (&set1 == &set2)
return true;
return memcmp(set1.word, set2.word, BitSet::getSizeInWords(set1.universeSize) << BitSet::nBytesInWordLog2) == 0;
}
inline bool operator != (const BitSet& set1, const BitSet& set2) {return !(set1 == set2);}
#endif // _BITSET_H

View File

@@ -0,0 +1,159 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _COALESCING_H_
#define _COALESCING_H_
#include "Fundamentals.h"
#include "Pool.h"
#include "RegisterPressure.h"
#include "InterferenceGraph.h"
#include "ControlGraph.h"
#include "ControlNodes.h"
#include "Instruction.h"
#include "SparseSet.h"
#include "RegisterAllocator.h"
#include "RegisterAllocatorTools.h"
#if 1
// Performing an ultra conservative coalescing meens that when we look at
// candidates (source,destination) for coalescing we need to make sure
// that the combined interference of the source and destination register
// will not exceed the total number of register available for the register
// class.
#define ULTRA_CONSERVATIVE_COALESCING
#else
// If we are not doing an ultra conservative coalescing we have to make sure
// that the total number of neighbor whose degree is greater than the total
// number of register is not greater than the total number of register.
#undef ULTRA_CONSERVATIVE_COALESCING
#endif
template <class RegisterPressure>
struct Coalescing
{
static bool coalesce(RegisterAllocator& registerAllocator);
};
template <class RegisterPressure>
bool Coalescing<RegisterPressure>::coalesce(RegisterAllocator& registerAllocator)
{
Pool& pool = registerAllocator.pool;
// Initialize the lookup table
//
Uint32 rangeCount = registerAllocator.rangeCount;
RegisterName* newRange = new RegisterName[2 * rangeCount];
RegisterName* coalescedRange = &newRange[rangeCount];
RegisterName* name2range = registerAllocator.name2range;
init(coalescedRange, rangeCount);
SparseSet interferences(pool, rangeCount);
InterferenceGraph<RegisterPressure>& iGraph = registerAllocator.iGraph;
bool removedInstructions = false;
ControlGraph& controlGraph = registerAllocator.controlGraph;
ControlNode** nodes = controlGraph.lndList;
Uint32 nNodes = controlGraph.nNodes;
// Walk the nodes in the loop nesting depth list.
for (Int32 n = nNodes - 1; n >= 0; n--) {
InstructionList& instructions = nodes[n]->getInstructions();
InstructionList::iterator it = instructions.begin();
while (!instructions.done(it)) {
Instruction& instruction = instructions.get(it);
it = instructions.advance(it);
if ((instruction.getFlags() & ifCopy) != 0) {
assert(instruction.getInstructionUseBegin() != instruction.getInstructionUseEnd() && instruction.getInstructionUseBegin()[0].isRegister());
assert(instruction.getInstructionDefineBegin() != instruction.getInstructionDefineEnd() && instruction.getInstructionDefineBegin()[0].isRegister());
RegisterName source = findRoot(name2range[instruction.getInstructionUseBegin()[0].getRegisterName()], coalescedRange);
RegisterName destination = findRoot(name2range[instruction.getInstructionDefineBegin()[0].getRegisterName()], coalescedRange);
if (source == destination) {
instruction.remove();
} else if (!iGraph.interfere(source, destination)) {
InterferenceVector* sourceVector = iGraph.getInterferenceVector(source);
InterferenceVector* destinationVector = iGraph.getInterferenceVector(destination);
#ifdef ULTRA_CONSERVATIVE_COALESCING
interferences.clear();
InterferenceVector* vector;
for (vector = sourceVector; vector != NULL; vector = vector->next) {
RegisterName* neighbors = vector->neighbors;
for (Uint32 i = 0; i < vector->count; i++)
interferences.set(findRoot(neighbors[i], coalescedRange));
}
for (vector = destinationVector; vector != NULL; vector = vector->next) {
RegisterName* neighbors = vector->neighbors;
for (Uint32 i = 0; i < vector->count; i++)
interferences.set(findRoot(neighbors[i], coalescedRange));
}
Uint32 count = interferences.getSize();
#else // ULTRA_CONSERVATIVE_COALESCING
trespass("not implemented");
Uint32 count = 0;
#endif // ULTRA_CONSERVATIVE_COALESCING
if (count < 6 /* FIX: should get the number from the class */) {
// Update the interferences vector.
if (sourceVector == NULL) {
iGraph.setInterferenceVector(source, destinationVector);
sourceVector = destinationVector;
} else if (destinationVector == NULL)
iGraph.setInterferenceVector(destination, sourceVector);
else {
InterferenceVector* last = NULL;
for (InterferenceVector* v = sourceVector; v != NULL; v = v->next)
last = v;
assert(last);
last->next = destinationVector;
iGraph.setInterferenceVector(destination, sourceVector);
}
// Update the interference matrix.
for (InterferenceVector* v = sourceVector; v != NULL; v = v->next) {
RegisterName* neighbors = v->neighbors;
for (Uint32 i = 0; i < v->count; i++) {
RegisterName neighbor = findRoot(neighbors[i], coalescedRange);
iGraph.setInterference(neighbor, source);
iGraph.setInterference(neighbor, destination);
}
}
instruction.remove();
coalescedRange[source] = destination;
removedInstructions = true;
}
}
}
}
}
registerAllocator.rangeCount = compress(registerAllocator.name2range, coalescedRange, registerAllocator.nameCount, rangeCount);
delete newRange;
return removedInstructions;
}
#endif // _COALESCING_H_

View File

@@ -0,0 +1,283 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef NEW_LAURENTM_CODE
#include "Coloring.h"
#include "VirtualRegister.h"
#include "FastBitSet.h"
#include "FastBitMatrix.h"
#include "CpuInfo.h"
bool Coloring::
assignRegisters(FastBitMatrix& interferenceMatrix)
{
PRUint32 *stackPtr = new(pool) PRUint32[vRegManager.count()];
return select(interferenceMatrix, stackPtr, simplify(interferenceMatrix, stackPtr));
}
PRInt32 Coloring::
getLowestSpillCostRegister(FastBitSet& bitset)
{
PRInt32 lowest = bitset.firstOne();
if (lowest != -1)
{
Flt32 cost = vRegManager.getVirtualRegister(lowest).spillInfo.spillCost;
for (PRInt32 r = bitset.nextOne(lowest); r != -1; r = bitset.nextOne(r))
{
VirtualRegister& vReg = vRegManager.getVirtualRegister(r);
if (!vReg.spillInfo.infiniteSpillCost && (vReg.spillInfo.spillCost < cost))
{
cost = vReg.spillInfo.spillCost;
lowest = r;
}
}
}
return lowest;
}
PRUint32* Coloring::
simplify(FastBitMatrix interferenceMatrix, PRUint32* stackPtr)
{
// first we construct the sets low and high. low contains all nodes of degree
// inferior to the number of register available on the processor. All the
// nodes with an high degree and a finite spill cost are placed in high.
// Nodes of high degree and infinite spill cost are not included in either sets.
PRUint32 nRegisters = vRegManager.count();
FastBitSet low(pool, nRegisters);
FastBitSet high(pool, nRegisters);
FastBitSet stack(pool, nRegisters);
for (VirtualRegisterManager::iterator i = vRegManager.begin(); !vRegManager.done(i); i = vRegManager.advance(i))
{
VirtualRegister& vReg = vRegManager.getVirtualRegister(i);
if (vReg.getClass() == vrcStackSlot)
{
stack.set(i);
vReg.colorRegister(nRegisters);
}
else
{
if (vReg.colorInfo.interferenceDegree < NUMBER_OF_REGISTERS)
low.set(i);
else // if (!vReg.spillInfo.infiniteSpillCost)
high.set(i);
// Set coloring info.
vReg.spillInfo.willSpill = false;
switch(vReg.getClass())
{
case vrcInteger:
vReg.colorRegister(LAST_GREGISTER + 1);
break;
case vrcFloatingPoint:
case vrcFixedPoint:
vReg.colorRegister(LAST_FPREGISTER + 1);
break;
default:
PR_ASSERT(false); // Cannot happen.
}
}
}
// push the stack registers
PRInt32 j;
for (j = stack.firstOne(); j != -1; j = stack.nextOne(j))
*stackPtr++ = j;
// simplify
while (true)
{
PRInt32 r;
while ((r = getLowestSpillCostRegister(low)) != -1)
{
VirtualRegister& vReg = vRegManager.getVirtualRegister(r);
/* update low and high */
FastBitSet inter(interferenceMatrix.getRow(r), nRegisters);
for (j = inter.firstOne(); j != -1; j = inter.nextOne(j))
{
VirtualRegister& neighbor = vRegManager.getVirtualRegister(j);
// if the new interference degree of one of his neighbor becomes
// NUMBER_OF_REGISTERS - 1 then it is added to the set 'low'.
PRUint32 maxInterference = 0;
switch (neighbor.getClass())
{
case vrcInteger:
maxInterference = NUMBER_OF_GREGISTERS;
break;
case vrcFloatingPoint:
case vrcFixedPoint:
maxInterference = NUMBER_OF_FPREGISTERS;
break;
default:
PR_ASSERT(false);
}
if ((vRegManager.getVirtualRegister(j).colorInfo.interferenceDegree-- == maxInterference))
{
high.clear(j);
low.set(j);
}
vReg.colorInfo.interferenceDegree--;
interferenceMatrix.clear(r, j);
interferenceMatrix.clear(j, r);
}
low.clear(r);
// Push this register.
*stackPtr++ = r;
}
if ((r = getLowestSpillCostRegister(high)) != -1)
{
high.clear(r);
low.set(r);
}
else
break;
}
return stackPtr;
}
bool Coloring::
select(FastBitMatrix& interferenceMatrix, PRUint32* stackBase, PRUint32* stackPtr)
{
PRUint32 nRegisters = vRegManager.count();
FastBitSet usedRegisters(NUMBER_OF_REGISTERS + 1); // usedRegisters if used for both GR & FPR.
FastBitSet preColoredRegisters(NUMBER_OF_REGISTERS + 1);
FastBitSet usedStack(nRegisters + 1);
bool success = true;
Int32 lastUsedSSR = -1;
// select
while (stackPtr != stackBase)
{
// Pop one register.
PRUint32 r = *--stackPtr;
VirtualRegister& vReg = vRegManager.getVirtualRegister(r);
FastBitSet neighbors(interferenceMatrix.getRow(r), nRegisters);
if (vReg.getClass() == vrcStackSlot)
// Stack slots coloring.
{
usedStack.clear();
for (PRInt32 i = neighbors.firstOne(); i != -1; i = neighbors.nextOne(i))
usedStack.set(vRegManager.getVirtualRegister(i).getColor());
Int32 color = usedStack.firstZero();
vReg.colorRegister(color);
if (color > lastUsedSSR)
lastUsedSSR = color;
}
else
// Integer & Floating point register coloring.
{
usedRegisters.clear();
preColoredRegisters.clear();
for (PRInt32 i = neighbors.firstOne(); i != -1; i = neighbors.nextOne(i))
{
VirtualRegister& nvReg = vRegManager.getVirtualRegister(i);
usedRegisters.set(nvReg.getColor());
if (nvReg.isPreColored())
preColoredRegisters.set(nvReg.getPreColor());
}
if (vReg.hasSpecialInterference)
usedRegisters |= vReg.specialInterference;
PRInt8 c = -1;
PRInt8 maxColor = 0;
PRInt8 firstColor = 0;
switch (vReg.getClass())
{
case vrcInteger:
firstColor = FIRST_GREGISTER;
maxColor = LAST_GREGISTER;
break;
case vrcFloatingPoint:
case vrcFixedPoint:
firstColor = FIRST_FPREGISTER;
maxColor = LAST_FPREGISTER;
break;
default:
PR_ASSERT(false);
}
if (vReg.isPreColored())
{
c = vReg.getPreColor();
if (usedRegisters.test(c))
c = -1;
}
else
{
for (c = usedRegisters.nextZero(firstColor - 1); (c >= 0) && (c <= maxColor) && (preColoredRegisters.test(c));
c = usedRegisters.nextZero(c)) {}
}
if ((c >= 0) && (c <= maxColor))
{
vReg.colorRegister(c);
}
else
{
VirtualRegister& stackRegister = vRegManager.newVirtualRegister(vrcStackSlot);
vReg.equivalentRegister[vrcStackSlot] = &stackRegister;
vReg.spillInfo.willSpill = true;
success = false;
}
}
}
#ifdef DEBUG
if (success)
{
for (VirtualRegisterManager::iterator i = vRegManager.begin(); !vRegManager.done(i); i = vRegManager.advance(i))
{
VirtualRegister& vReg = vRegManager.getVirtualRegister(i);
switch (vReg.getClass())
{
case vrcInteger:
if (vReg.getColor() > LAST_GREGISTER)
PR_ASSERT(false);
break;
case vrcFloatingPoint:
case vrcFixedPoint:
#if NUMBER_OF_FPREGISTERS != 0
if (vReg.getColor() > LAST_FPREGISTER)
PR_ASSERT(false);
#endif
break;
default:
break;
}
}
}
#endif
vRegManager.nUsedStackSlots = lastUsedSSR + 1;
return success;
}
#endif // NEW_LAURENTM_CODE

View File

@@ -0,0 +1,284 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "Fundamentals.h"
#include "ControlGraph.h"
#include "ControlNodes.h"
#include "Instruction.h"
#include "RegisterAllocator.h"
#include "VirtualRegister.h"
#include "InterferenceGraph.h"
#include "SparseSet.h"
#include "Spilling.h"
#include "Splits.h"
UT_EXTERN_LOG_MODULE(RegAlloc);
template <class RegisterPressure>
class Coloring
{
private:
static RegisterName* simplify(RegisterAllocator& registerAllocator, RegisterName* coloringStack);
static bool select(RegisterAllocator& registerAllocator, RegisterName* coloringStack, RegisterName* coloringStackPtr);
public:
static bool color(RegisterAllocator& registerAllocator);
static void finalColoring(RegisterAllocator& registerAllocator);
};
template <class RegisterPressure>
void Coloring<RegisterPressure>::finalColoring(RegisterAllocator& registerAllocator)
{
RegisterName* color = registerAllocator.color;
RegisterName* name2range = registerAllocator.name2range;
ControlGraph& controlGraph = registerAllocator.controlGraph;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
for (Uint32 n = 0; n < nNodes; n++) {
InstructionList& instructions = nodes[n]->getInstructions();
for (InstructionList::iterator i = instructions.begin(); !instructions.done(i); i = instructions.advance(i)) {
Instruction& instruction = instructions.get(i);
InstructionUse* useEnd = instruction.getInstructionUseEnd();
for (InstructionUse* usePtr = instruction.getInstructionUseBegin(); usePtr < useEnd; usePtr++)
if (usePtr->isRegister()) {
usePtr->setRegisterName(color[name2range[usePtr->getRegisterName()]]);
#ifdef DEBUG
RegisterID rid = usePtr->getRegisterID();
setColoredRegister(rid);
usePtr->setRegisterID(rid);
#endif // DEBUG
}
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
for (InstructionDefine* definePtr = instruction.getInstructionDefineBegin(); definePtr < defineEnd; definePtr++)
if (definePtr->isRegister()) {
definePtr->setRegisterName(color[name2range[definePtr->getRegisterName()]]);
#ifdef DEBUG
RegisterID rid = definePtr->getRegisterID();
setColoredRegister(rid);
definePtr->setRegisterID(rid);
#endif // DEBUG
}
}
}
}
template <class RegisterPressure>
bool Coloring<RegisterPressure>::select(RegisterAllocator& registerAllocator, RegisterName* coloringStack, RegisterName* coloringStackPtr)
{
Uint32 rangeCount = registerAllocator.rangeCount;
RegisterName* color = new RegisterName[rangeCount];
registerAllocator.color = color;
for (Uint32 r = 1; r < rangeCount; r++)
color[r] = RegisterName(6); // FIX;
// Color the preColored registers.
//
VirtualRegisterManager& vrManager = registerAllocator.vrManager;
RegisterName* name2range = registerAllocator.name2range;
PreColoredRegister* machineEnd = vrManager.getMachineRegistersEnd();
for (PreColoredRegister* machinePtr = vrManager.getMachineRegistersBegin(); machinePtr < machineEnd; machinePtr++)
if (machinePtr->id != invalidID) {
color[name2range[getName(machinePtr->id)]] = machinePtr->color;
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("\twill preColor range %d as %d\n", name2range[getName(machinePtr->id)], machinePtr->color));
}
SpillCost* cost = registerAllocator.spillCost;
Pool& pool = registerAllocator.pool;
SparseSet& spill = *new(pool) SparseSet(pool, rangeCount);
registerAllocator.willSpill = &spill;
SparseSet neighborColors(pool, 6); // FIX
InterferenceGraph<RegisterPressure>& iGraph = registerAllocator.iGraph;
bool coloringFailed = false;
while (coloringStackPtr > coloringStack) {
RegisterName range = *--coloringStackPtr;
if (!cost[range].infinite && cost[range].cost < 0) {
coloringFailed = true;
spill.set(range);
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("\tfailed to color %d, will spill.\n", range));
} else {
neighborColors.clear();
for (InterferenceVector* vector = iGraph.getInterferenceVector(range); vector != NULL; vector = vector->next)
for (Int32 i = vector->count - 1; i >= 0; --i) {
RegisterName neighborColor = color[vector->neighbors[i]];
if (neighborColor < 6) // FIX
neighborColors.set(neighborColor);
}
if (neighborColors.getSize() == 6) { // FIX
coloringFailed = true;
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("\tfailed to color %d, ", range));
if (!Splits<RegisterPressure>::findSplit(registerAllocator, color, range)) {
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("will spill.\n"));
spill.set(range);
} else
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("will split.\n"));
} else {
for (Uint32 i = 0; i < 6; i++) // FIX
if (!neighborColors.test(i)) {
fprintf(stdout, "\twill color %d as %d\n", range, i);
color[range] = RegisterName(i);
break;
}
}
}
}
#ifdef DEBUG_LOG
if (coloringFailed) {
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("Coloring failed:\n"));
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("\twill spill: "));
spill.printPretty(UT_LOG_MODULE(RegAlloc));
} else {
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("Coloring succeeded:\n"));
for (Uint32 i = 1; i < rangeCount; i++)
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("\trange %d colored as %d\n", i, color[i]));
}
#endif
return !coloringFailed;
}
template <class RegisterPressure>
RegisterName* Coloring<RegisterPressure>::simplify(RegisterAllocator& registerAllocator, RegisterName* coloringStack)
{
InterferenceGraph<RegisterPressure>& iGraph = registerAllocator.iGraph;
SpillCost* spillCost = registerAllocator.spillCost;
Uint32 rangeCount = registerAllocator.rangeCount;
Uint32* degree = new Uint32[rangeCount];
for (RegisterName i = RegisterName(1); i < rangeCount; i = RegisterName(i + 1)) {
InterferenceVector* vector = iGraph.getInterferenceVector(i);
degree[i] = (vector != NULL) ? vector->count : 0;
}
Pool& pool = registerAllocator.pool;
SparseSet low(pool, rangeCount);
SparseSet high(pool, rangeCount);
SparseSet highInfinite(pool, rangeCount);
SparseSet preColored(pool, rangeCount);
// Get the precolored registers.
//
VirtualRegisterManager& vrManager = registerAllocator.vrManager;
RegisterName* name2range = registerAllocator.name2range;
PreColoredRegister* machineEnd = vrManager.getMachineRegistersEnd();
for (PreColoredRegister* machinePtr = vrManager.getMachineRegistersBegin(); machinePtr < machineEnd; machinePtr++)
if (machinePtr->id != invalidID)
preColored.set(name2range[getName(machinePtr->id)]);
// Insert the live ranges in the sets.
//
for (Uint32 range = 1; range < rangeCount; range++)
if (!preColored.test(range))
if (degree[range] < 6) // FIX
low.set(range);
else if (!spillCost[range].infinite)
high.set(range);
else
highInfinite.set(range);
#ifdef DEBUG_LOG
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("Coloring sets:\n\tlow = "));
low.printPretty(UT_LOG_MODULE(RegAlloc));
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("\thigh = "));
high.printPretty(UT_LOG_MODULE(RegAlloc));
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("\thighInfinite = "));
highInfinite.printPretty(UT_LOG_MODULE(RegAlloc));
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("\tpreColored = "));
preColored.printPretty(UT_LOG_MODULE(RegAlloc));
#endif // DEBUG_LOG
RegisterName* coloringStackPtr = coloringStack;
while (low.getSize() != 0 || high.getSize() != 0) {
while (low.getSize() != 0) {
RegisterName range = RegisterName(low.getOne());
low.clear(range);
*coloringStackPtr++ = range;
for (InterferenceVector* vector = iGraph.getInterferenceVector(range); vector != NULL; vector = vector->next)
for (Int32 i = (vector->count - 1); i >= 0; --i) {
RegisterName neighbor = vector->neighbors[i];
degree[neighbor]--;
if (degree[neighbor] < 6) // FIX
if (high.test(neighbor)) {
high.clear(neighbor);
low.set(neighbor);
} else if (highInfinite.test(neighbor)) {
highInfinite.clear(neighbor);
low.set(neighbor);
}
}
}
if (high.getSize() != 0) {
RegisterName best = RegisterName(high.getOne());
double bestCost = spillCost[best].cost;
double bestDegree = degree[best];
// Choose the next best candidate.
//
for (SparseSet::iterator i = high.begin(); !high.done(i); i = high.advance(i)) {
RegisterName range = RegisterName(high.get(i));
double thisCost = spillCost[range].cost;
double thisDegree = degree[range];
if (thisCost * bestDegree < bestCost * thisDegree) {
best = range;
bestCost = thisCost;
bestDegree = thisDegree;
}
}
high.clear(best);
low.set(best);
}
}
assert(highInfinite.getSize() == 0);
delete degree;
#ifdef DEBUG_LOG
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("Coloring stack:\n\t"));
for (RegisterName* sp = coloringStack; sp < coloringStackPtr; ++sp)
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("%d ", *sp));
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("\n"));
#endif // DEBUG_LOG
return coloringStackPtr;
}
template <class RegisterPressure>
bool Coloring<RegisterPressure>::color(RegisterAllocator& registerAllocator)
{
RegisterName* coloringStack = new RegisterName[registerAllocator.rangeCount];
return select(registerAllocator, coloringStack, simplify(registerAllocator, coloringStack));
}

View File

@@ -0,0 +1,212 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "Fundamentals.h"
#include <string.h>
#include "ControlGraph.h"
#include "ControlNodes.h"
#include "DominatorGraph.h"
DominatorGraph::DominatorGraph(ControlGraph& controlGraph) : controlGraph(controlGraph)
{
Uint32 nNodes = controlGraph.nNodes;
GtoV = new Uint32[nNodes + 1];
VtoG = new Uint32[nNodes + 1];
Uint32 v = 1;
for (Uint32 n = 0; n < nNodes; n++) {
VtoG[v] = n;
GtoV[n] = v++;
}
// Initialize all the 1-based arrays.
//
parent = new Uint32[v];
semi = new Uint32[v];
vertex = new Uint32[v];
label = new Uint32[v];
size = new Uint32[v];
ancestor = new Uint32[v];
child = new Uint32[v];
dom = new Uint32[v];
bucket = new DGLinkedList*[v];
memset(semi, '\0', v * sizeof(Uint32));
memset(bucket, '\0', v * sizeof(DGLinkedList*));
vCount = v;
build();
delete parent;
delete semi;
delete vertex;
delete label;
delete size;
delete ancestor;
delete child;
delete dom;
delete bucket;
}
Uint32 DominatorGraph::DFS(Uint32 vx, Uint32 n)
{
semi[vx] = ++n;
vertex[n] = label[vx] = vx;
ancestor[vx] = child[vx] = 0;
size[vx] = 1;
ControlNode& node = *controlGraph.dfsList[VtoG[vx]];
ControlEdge* successorEnd = node.getSuccessorsEnd();
for (ControlEdge* successorPtr = node.getSuccessorsBegin(); successorPtr < successorEnd; successorPtr++) {
Uint32 w = GtoV[successorPtr->getTarget().dfsNum];
if (semi[w] == 0) {
parent[w] = vx;
n = DFS(w, n);
}
}
return n;
}
void DominatorGraph::LINK(Uint32 vx, Uint32 w)
{
Uint32 s = w;
while (semi[label[w]] < semi[label[child[s]]]) {
if (size[s] + size[child[child[s]]] >= (size[child[s]] << 1)) {
ancestor[child[s]] = s;
child[s] = child[child[s]];
} else {
size[child[s]] = size[s];
s = ancestor[s] = child[s];
}
}
label[s] = label[w];
size[vx] += size[w];
if(size[vx] < (size[w] << 1)) {
Uint32 t = s;
s = child[vx];
child[vx] = t;
}
while( s != 0 ) {
ancestor[s] = vx;
s = child[s];
}
}
void DominatorGraph::COMPRESS(Uint32 vx)
{
if(ancestor[ancestor[vx]] != 0) {
COMPRESS(ancestor[vx]);
if(semi[label[ancestor[vx]]] < semi[label[vx]])
label[vx] = label[ancestor[vx]];
ancestor[vx] = ancestor[ancestor[vx]];
}
}
Uint32 DominatorGraph::EVAL(Uint32 vx)
{
if(ancestor[vx] == 0)
return label[vx];
COMPRESS(vx);
return (semi[label[ancestor[vx]]] >= semi[label[vx]]) ? label[vx] : label[ancestor[vx]];
}
void DominatorGraph::build()
{
Uint32 n = DFS(GtoV[0], 0);
size[0] = label[0] = semi[0];
for (Uint32 i = n; i >= 2; i--) {
Uint32 w = vertex[i];
ControlNode& node = *controlGraph.dfsList[VtoG[w]];
const DoublyLinkedList<ControlEdge>& predecessors = node.getPredecessors();
for (DoublyLinkedList<ControlEdge>::iterator p = predecessors.begin(); !predecessors.done(p); p = predecessors.advance(p)) {
Uint32 vx = GtoV[predecessors.get(p).getSource().dfsNum];
Uint32 u = EVAL(vx);
if(semi[u] < semi[w])
semi[w] = semi[u];
}
DGLinkedList* elem = new DGLinkedList();
elem->next = bucket[vertex[semi[w]]];
elem->index = w;
bucket[vertex[semi[w]]] = elem;
LINK(parent[w], w);
elem = bucket[parent[w]];
while(elem != NULL) {
Uint32 vx = elem->index;
Uint32 u = EVAL(vx);
dom[vx] = (semi[u] < semi[vx]) ? u : parent[w];
elem = elem->next;
}
}
memset(size, '\0', n * sizeof(Uint32));
Pool& pool = controlGraph.pool;
nodes = new(pool) DGNode[n];
for(Uint32 j = 2; j <= n; j++) {
Uint32 w = vertex[j];
Uint32 d = dom[w];
if(d != vertex[semi[w]]) {
d = dom[d];
dom[w] = d;
}
size[d]++;
}
dom[GtoV[0]] = 0;
for (Uint32 k = 1; k <= n; k++) {
DGNode& node = nodes[VtoG[k]];
Uint32 count = size[k];
node.successorsEnd = node.successorsBegin = (count) ? new(pool) Uint32[count] : (Uint32*) 0;
}
for (Uint32 l = 2; l <= n; l++)
*(nodes[VtoG[dom[l]]].successorsEnd)++ = VtoG[l];
}
#ifdef DEBUG_LOG
void DominatorGraph::printPretty(LogModuleObject log)
{
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("Dominator Graph:\n"));
Uint32 nNodes = controlGraph.nNodes;
for (Uint32 i = 0; i < nNodes; i++) {
DGNode& node = nodes[i];
if (node.successorsBegin != node.successorsEnd) {
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\tN%d dominates ", i));
for (Uint32* successorsPtr = node.successorsBegin; successorsPtr < node.successorsEnd; successorsPtr++)
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("N%d ", *successorsPtr));
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\n"));
}
}
}
#endif // DEBUG_LOG

View File

@@ -0,0 +1,80 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _DOMINATOR_GRAPH_H_
#define _DOMINATOR_GRAPH_H_
#include "LogModule.h"
class ControlGraph;
struct DGNode
{
Uint32* successorsBegin;
Uint32* successorsEnd;
};
struct DGLinkedList
{
DGLinkedList* next;
Uint32 index;
};
class DominatorGraph
{
private:
ControlGraph& controlGraph;
Uint32 vCount;
Uint32* VtoG;
Uint32* GtoV;
Uint32* parent;
Uint32* semi;
Uint32* vertex;
Uint32* label;
Uint32* size;
Uint32* ancestor;
Uint32* child;
Uint32* dom;
DGLinkedList** bucket;
DGNode* nodes;
private:
void build();
Uint32 DFS(Uint32 vx, Uint32 n);
void LINK(Uint32 vx, Uint32 w);
void COMPRESS(Uint32 vx);
Uint32 EVAL(Uint32 vx);
public:
DominatorGraph(ControlGraph& controlGraph);
Uint32* getSuccessorsBegin(Uint32 n) const {return nodes[n].successorsBegin;}
Uint32* getSuccessorsEnd(Uint32 n) const {return nodes[n].successorsEnd;}
#ifdef DEBUG_LOG
void printPretty(LogModuleObject log);
#endif // DEBUG_LOG
};
#endif // _DOMINATOR_GRAPH_H_

View File

@@ -0,0 +1,20 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "Fundamentals.h"
#include "HashSet.h"

View File

@@ -0,0 +1,97 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _HASH_SET_H_
#define _HASH_SET_H_
#include "Fundamentals.h"
#include "Pool.h"
#include <string.h>
struct HashSetElement
{
Uint32 index;
HashSetElement* next;
};
class HashSet
{
private:
static const hashSize = 64;
// Return the hash code for the given element index.
static Uint32 getHashCode(Uint32 index) {return index & (hashSize - 1);} // Could be better !
private:
Pool& allocationPool;
HashSetElement** bucket;
HashSetElement* free;
private:
// No copy constructor.
HashSet(const HashSet&);
// No copy operator.
void operator = (const HashSet&);
public:
// Create a new HashSet.
inline HashSet(Pool& pool, Uint32 universeSize);
// Clear the hashset.
void clear();
// Clear the element for the given index.
void clear(Uint32 index);
// Set the element for the given index.
void set(Uint32 index);
// Return true if the element at index is a member.
bool test(Uint32 index) const;
// Union with the given hashset.
inline void or(const HashSet& set);
// Intersection with the given hashset.
inline void and(const HashSet& set);
// Difference with the given hashset.
inline void difference(const HashSet& set);
// Logical operators.
HashSet& operator |= (const HashSet& set) {or(set); return *this;}
HashSet& operator &= (const HashSet& set) {and(set); return *this;}
HashSet& operator -= (const HashSet& set) {difference(set); return *this;}
// Iterator to conform with the set API.
typedef HashSetElement* iterator;
// Return the iterator for the first element of this set.
iterator begin() const;
// Return the next iterator.
iterator advance(iterator pos) const;
// Return true if the iterator is at the end of the set.
bool done(iterator pos) const {return pos == NULL;}
};
inline HashSet::HashSet(Pool& pool, Uint32 /*universeSize*/)
: allocationPool(pool), free(NULL)
{
bucket = new(pool) HashSetElement*[hashSize];
memset(bucket, '\0', sizeof(HashSetElement*));
}
#endif // _HASH_SET_H_

View File

@@ -0,0 +1,213 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _INDEXED_POOL_H_
#define _INDEXED_POOL_H_
#include "Fundamentals.h"
#include <string.h>
#include <stdlib.h>
//------------------------------------------------------------------------------
// IndexedPool<IndexedObjectSubclass> is an indexed pool of objects. The
// template parameter 'IndexedObjectSubclass' must be a subclass of the struct
// IndexedObject.
//
// When the indexed pool is ask to allocate and initialize a new object (using
// the operator new(anIndexedPool) it will zero the memory used to store the
// object and initialize the field 'index' of this object to its position in
// the pool.
//
// An object allocated by the indexed pool can be freed by calling the method
// IndexedPool::release(IndexedElement& objectIndex).
//
// example:
//
// IndexedPool<IndexedElement> elementPool;
//
// IndexedElement& element1 = *new(elementPool) IndexedElement();
// IndexedElement& element2 = *new(elementPool) IndexedElement();
//
// indexedPool.release(element1);
// IndexedElement& element3 = *new(elementPool) IndexedElement();
//
// At this point element1 is no longer a valid object, element2 is at
// index 2 and element3 is at index 1.
//
//------------------------------------------------------------------------------
// IndexedObject -
//
template<class Object>
struct IndexedObject
{
Uint32 index; // Index in the pool.
Object* next; // Used to link IndexedObject together.
Uint32 getIndex() {return index;}
};
//------------------------------------------------------------------------------
// IndexedPool<IndexedObject> -
//
template <class IndexedObject>
class IndexedPool
{
private:
static const blockSize = 4; // Size of one block.
Uint32 nBlocks; // Number of blocks in the pool.
IndexedObject** block; // Array of block pointers.
IndexedObject* freeObjects; // Chained list of free IndexedObjects.
Uint32 nextIndex; // Index of the next free object in the last block.
private:
void allocateAnotherBlock();
IndexedObject& newObject();
public:
IndexedPool() : nBlocks(0), block(NULL), freeObjects(NULL), nextIndex(1) {}
~IndexedPool();
IndexedObject& get(Uint32 index) const;
void release(IndexedObject& object);
void setSize(Uint32 size) {assert(size < nextIndex); nextIndex = size;}
// Return the universe size.
Uint32 getSize() {return nextIndex;}
friend void* operator new(size_t, IndexedPool<IndexedObject>& pool); // Needs to call newObject().
};
// Free all the memory allocated for this object.
//
template <class IndexedObject>
IndexedPool<IndexedObject>::~IndexedPool()
{
for (Uint32 n = 0; n < nBlocks; n++)
free(&((IndexedObject **) &block[n][n*blockSize])[-(n + 1)]);
}
// Release the given. This object will be iserted in the chained
// list of free IndexedObjects. To minimize the fragmentation the chained list
// is ordered by ascending indexes.
//
template <class IndexedObject>
void IndexedPool<IndexedObject>::release(IndexedObject& object)
{
Uint32 index = object.index;
IndexedObject* list = freeObjects;
assert(&object == &get(index)); // Make sure that object is owned by this pool.
if (list == NULL) { // The list is empty.
freeObjects = &object;
object.next = NULL;
} else { // The list contains at least 1 element.
if (index < list->index) { // insert as first element.
freeObjects = &object;
object.next = list;
} else { // Find this object's place.
while ((list->next) != NULL && (list->next->index < index))
list = list->next;
object.next = list->next;
list->next = &object;
}
}
#ifdef DEBUG
// Sanity check to be sure that the list is correctly ordered.
for (IndexedObject* obj = freeObjects; obj != NULL; obj = obj->next)
if (obj->next != NULL)
assert(obj->index < obj->next->index);
#endif
}
// Create a new block of IndexedObjects. We will allocate the memory to
// store IndexedPool::blockSize IndexedObject and the new Array of block
// pointers.
// The newly created IndexedObjects will not be initialized.
//
template <class IndexedObject>
void IndexedPool<IndexedObject>::allocateAnotherBlock()
{
void* memory = (void *) malloc((nBlocks + 1) * sizeof(Uint32) + blockSize * sizeof(IndexedObject));
memcpy(memory, block, nBlocks * sizeof(Uint32));
block = (IndexedObject **) memory;
IndexedObject* objects = (IndexedObject *) &block[nBlocks + 1];
block[nBlocks] = &objects[-(nBlocks * blockSize)];
nBlocks++;
}
// Return the IndexedObject at the position 'index' in the pool.
//
template <class IndexedObject>
IndexedObject& IndexedPool<IndexedObject>::get(Uint32 index) const
{
Uint32 blockIndex = index / blockSize;
assert(blockIndex < nBlocks);
return block[blockIndex][index];
}
// Return the reference of an unused object in the pool.
//
template <class IndexedObject>
IndexedObject& IndexedPool<IndexedObject>::newObject()
{
if (freeObjects != NULL) {
IndexedObject& newObject = *freeObjects;
freeObjects = newObject.next;
return newObject;
}
Uint32 nextIndex = this->nextIndex++;
Uint32 blockIndex = nextIndex / blockSize;
while (blockIndex >= nBlocks)
allocateAnotherBlock();
IndexedObject& newObject = block[blockIndex][nextIndex];
newObject.index = nextIndex;
return newObject;
}
// Return the address of the next unsused object in the given
// indexed pool. The field index of the newly allocated object
// will be initialized to the corresponding index of this object
// in the pool.
//
template <class IndexedObject>
void* operator new(size_t size, IndexedPool<IndexedObject>& pool)
{
assert(size == sizeof(IndexedObject));
return (void *) &pool.newObject();
}
#endif // _INDEXED_POOL_H_

View File

@@ -0,0 +1,258 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _INTERFERENCE_GRAPH_H_
#define _INTERFERENCE_GRAPH_H_
#include "Fundamentals.h"
#include "ControlGraph.h"
#include "Primitives.h"
#include "Instruction.h"
#include "VirtualRegister.h"
#include "RegisterPressure.h"
#include "SparseSet.h"
#include <string.h>
struct InterferenceVector
{
Uint32 count;
InterferenceVector* next;
RegisterName* neighbors;
InterferenceVector() : count(0), next(NULL) {}
};
class RegisterAllocator;
template <class RegisterPressure>
class InterferenceGraph
{
private:
RegisterAllocator& registerAllocator;
RegisterPressure::Set* interferences;
InterferenceVector** vector;
Uint32* offset;
Uint32 rangeCount;
private:
// No copy constructor.
InterferenceGraph(const InterferenceGraph&);
// No copy operator.
void operator = (const InterferenceGraph&);
// Check if reg is a member of the universe.
void checkMember(RegisterName name) {assert(name < rangeCount);}
// Return the edge index for the interference between name1 and name2.
Uint32 getEdgeIndex(RegisterName name1, RegisterName name2);
public:
InterferenceGraph(RegisterAllocator& registerAllocator) : registerAllocator(registerAllocator) {}
// Calculate the interferences.
void build();
// Return true if reg1 and reg2 interfere.
bool interfere(RegisterName name1, RegisterName name2);
// Return the interference vector for the given register or NULL if there is none.
InterferenceVector* getInterferenceVector(RegisterName name) {return vector[name];}
// Set the interference between name1 and name2.
void setInterference(RegisterName name1, RegisterName name2);
// Set the interference vector for the given register.
void setInterferenceVector(RegisterName name, InterferenceVector* v) {vector[name] = v;}
#ifdef DEBUG_LOG
// Print the interferences.
void printPretty(LogModuleObject log);
#endif // DEBUG_LOG
};
template <class RegisterPressure>
void InterferenceGraph<RegisterPressure>::build()
{
Pool& pool = registerAllocator.pool;
Uint32 rangeCount = registerAllocator.rangeCount;
this->rangeCount = rangeCount;
// Initialize the structures.
//
offset = new(pool) Uint32[rangeCount + 1];
vector = new(pool) InterferenceVector*[rangeCount];
memset(vector, '\0', sizeof(InterferenceVector*) * rangeCount);
Uint32 o = 0;
offset[0] = 0;
for (Uint32 i = 1; i <= rangeCount; ++i) {
offset[i] = o;
o += i;
}
interferences = new(pool) RegisterPressure::Set(pool, (rangeCount * rangeCount) / 2);
ControlGraph& controlGraph = registerAllocator.controlGraph;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
RegisterName* name2range = registerAllocator.name2range;
LivenessInfo<RegisterPressure> liveness = Liveness<RegisterPressure>::analysis(controlGraph, rangeCount, name2range);
registerAllocator.liveness = liveness;
SparseSet currentLive(pool, rangeCount);
for (Uint32 n = 0; n < nNodes; n++) {
ControlNode& node = *nodes[n];
currentLive = liveness.liveOut[n];
InstructionList& instructions = node.getInstructions();
for (InstructionList::iterator i = instructions.end(); !instructions.done(i); i = instructions.retreat(i)) {
Instruction& instruction = instructions.get(i);
InstructionUse* useBegin = instruction.getInstructionUseBegin();
InstructionUse* useEnd = instruction.getInstructionUseEnd();
InstructionUse* usePtr;
InstructionDefine* defineBegin = instruction.getInstructionDefineBegin();
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
InstructionDefine* definePtr;
// Handle the copy instruction to avoid unnecessary interference between the 2 registers.
if ((instruction.getFlags() & ifCopy) != 0) {
assert(useBegin != useEnd && useBegin[0].isRegister());
currentLive.clear(name2range[useBegin[0].getRegisterName()]);
}
// Create the interferences.
for (definePtr = defineBegin; definePtr < defineEnd; definePtr++)
if (definePtr->isRegister()) {
RegisterName define = name2range[definePtr->getRegisterName()];
for (SparseSet::iterator e = currentLive.begin(); !currentLive.done(e); e = currentLive.advance(e)) {
RegisterName live = RegisterName(currentLive.get(e));
if ((live != define) && !interfere(live, define) && registerAllocator.canInterfere(live, define)) {
if (vector[define] == NULL)
vector[define] = new(pool) InterferenceVector();
vector[define]->count++;
if (vector[live] == NULL)
vector[live] = new(pool) InterferenceVector();
vector[live]->count++;
setInterference(live, define);
}
}
}
// Now update the liveness.
//
for (definePtr = defineBegin; definePtr < defineEnd; definePtr++)
if (definePtr->isRegister())
currentLive.clear(name2range[definePtr->getRegisterName()]);
for (usePtr = useBegin; usePtr < useEnd; usePtr++)
if (usePtr->isRegister())
currentLive.set(name2range[usePtr->getRegisterName()]);
}
}
// Allocate the memory to store the interferences.
//
for (Uint32 e = 0; e < rangeCount; e++)
if (vector[e] != NULL) {
InterferenceVector& v = *vector[e];
v.neighbors = new(pool) RegisterName[v.count];
v.count = 0;
}
// Initialize the edges.
//
if (RegisterPressure::Set::isOrdered()) {
RegisterName name1 = RegisterName(0);
for (RegisterPressure::Set::iterator i = interferences->begin(); !interferences->done(i); i = interferences->advance(i)) {
Uint32 interferenceIndex = interferences->get(i);
while(interferenceIndex >= offset[name1 + 1])
name1 = RegisterName(name1 + 1);
assert((interferenceIndex >= offset[name1]) && (interferenceIndex < offset[name1 + 1]));
RegisterName name2 = RegisterName(interferenceIndex - offset[name1]);
assert(interfere(name1, name2));
InterferenceVector& vector1 = *vector[name1];
vector1.neighbors[vector1.count++] = name2;
InterferenceVector& vector2 = *vector[name2];
vector2.neighbors[vector2.count++] = name1;
}
} else {
trespass("not Implemented"); // FIX: need one more pass to initialize the vectors.
}
}
template <class RegisterPressure>
Uint32 InterferenceGraph<RegisterPressure>::getEdgeIndex(RegisterName name1, RegisterName name2)
{
checkMember(name1); checkMember(name2);
assert(name1 != name2); // This is not possible.
return (name1 < name2) ? offset[name2] + name1 : offset[name1] + name2;
}
template <class RegisterPressure>
void InterferenceGraph<RegisterPressure>::setInterference(RegisterName name1, RegisterName name2)
{
interferences->set(getEdgeIndex(name1, name2));
}
template <class RegisterPressure>
bool InterferenceGraph<RegisterPressure>::interfere(RegisterName name1, RegisterName name2)
{
return interferences->test(getEdgeIndex(name1, name2));
}
#ifdef DEBUG_LOG
template <class RegisterPressure>
void InterferenceGraph<RegisterPressure>::printPretty(LogModuleObject log)
{
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("Interference Vectors:\n"));
for (Uint32 i = 1; i < rangeCount; i++) {
if (vector[i] != NULL) {
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\tvr%d: (", i));
for (InterferenceVector* v = vector[i]; v != NULL; v = v->next)
for (Uint32 j = 0; j < v->count; j++) {
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("%d", v->neighbors[j]));
if (v->next != NULL || j != (v->count - 1))
UT_OBJECTLOG(log, PR_LOG_ALWAYS, (","));
}
UT_OBJECTLOG(log, PR_LOG_ALWAYS, (")\n"));
}
}
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("Interference Matrix:\n"));
for (RegisterName name1 = RegisterName(1); name1 < rangeCount; name1 = RegisterName(name1 + 1)) {
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\t%d:\t", name1));
for (RegisterName name2 = RegisterName(1); name2 < rangeCount; name2 = RegisterName(name2 + 1))
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("%c", ((name1 != name2) && interfere(name1, name2)) ? '1' : '0'));
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\n"));
}
}
#endif // DEBUG_LOG
#endif // _INTERFERENCE_GRAPH_H_

View File

@@ -0,0 +1,87 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _LIVE_RANGE_H_
#define _LIVE_RANGE_H_
#include "Fundamentals.h"
#include "ControlGraph.h"
#include "ControlNodes.h"
#include "Primitives.h"
#include "Instruction.h"
#include "RegisterAllocator.h"
#include "RegisterAllocatorTools.h"
template <class RegisterPressure>
struct LiveRange
{
static void build(RegisterAllocator& registerAllocator);
};
template <class RegisterPressure>
void LiveRange<RegisterPressure>::build(RegisterAllocator& registerAllocator)
{
// Intialize the lookup table.
//
Uint32 nameCount = registerAllocator.nameCount;
RegisterName* nameTable = new(registerAllocator.pool) RegisterName[2*nameCount];
RegisterName* rangeName = &nameTable[nameCount];
init(rangeName, nameCount);
// Walk the graph.
//
ControlGraph& controlGraph = registerAllocator.controlGraph;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
SparseSet destination(registerAllocator.pool, nameCount);
for (Uint32 n = 0; n < nNodes; n++) {
InstructionList& phiNodes = nodes[n]->getPhiNodeInstructions();
destination.clear();
for (InstructionList::iterator i = phiNodes.begin(); !phiNodes.done(i); i = phiNodes.advance(i)) {
Instruction& phiNode = phiNodes.get(i);
assert(phiNode.getInstructionDefineBegin() != phiNode.getInstructionDefineEnd() && phiNode.getInstructionDefineBegin()[0].isRegister());
destination.set(findRoot(phiNode.getInstructionDefineBegin()[0].getRegisterName(), rangeName));
}
for (InstructionList::iterator p = phiNodes.begin(); !phiNodes.done(p); p = phiNodes.advance(p)) {
Instruction& phiNode = phiNodes.get(p);
assert(phiNode.getInstructionDefineBegin() != phiNode.getInstructionDefineEnd() && phiNode.getInstructionDefineBegin()[0].isRegister());
RegisterName destinationName = phiNode.getInstructionDefineBegin()[0].getRegisterName();
RegisterName destinationRoot = findRoot(destinationName, rangeName);
InstructionUse* useEnd = phiNode.getInstructionUseEnd();
for (InstructionUse* usePtr = phiNode.getInstructionUseBegin(); usePtr < useEnd; usePtr++) {
assert(usePtr->isRegister());
RegisterName sourceName = usePtr->getRegisterName();
RegisterName sourceRoot = findRoot(sourceName, rangeName);
if (sourceRoot != destinationRoot && !destination.test(sourceRoot))
rangeName[sourceRoot] = destinationRoot;
}
}
}
registerAllocator.rangeCount = compress(registerAllocator.name2range, rangeName, nameCount, nameCount);
}
#endif // _LIVE_RANGE_H_

View File

@@ -0,0 +1,163 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _LIVE_RANGE_GRAPH_
#define _LIVE_RANGE_GRAPH_
#include "Fundamentals.h"
#include "Pool.h"
#include "ControlGraph.h"
#include "ControlNodes.h"
#include "Instruction.h"
#include "RegisterTypes.h"
class RegisterAllocator;
template <class RegisterPressure>
class LiveRangeGraph
{
private:
RegisterAllocator& registerAllocator;
RegisterPressure::Set* edges;
Uint32 rangeCount;
public:
//
//
LiveRangeGraph(RegisterAllocator& registerAllocator) : registerAllocator(registerAllocator) {}
//
//
void build();
//
//
void addEdge(RegisterName name1, RegisterName name2);
//
//
bool haveEdge(RegisterName name1, RegisterName name2);
#ifdef DEBUG_LOG
//
//
void printPretty(LogModuleObject log);
#endif // DEBUG_LOG
};
template <class RegisterPressure>
void LiveRangeGraph<RegisterPressure>::build()
{
Pool& pool = registerAllocator.pool;
Uint32 rangeCount = registerAllocator.rangeCount;
this->rangeCount = rangeCount;
edges = new(pool) RegisterPressure::Set(pool, rangeCount * rangeCount);
ControlGraph& controlGraph = registerAllocator.controlGraph;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
RegisterName* name2range = registerAllocator.name2range;
LivenessInfo<RegisterPressure>& liveness = registerAllocator.liveness;
SparseSet currentLive(pool, rangeCount);
for (Uint32 n = 0; n < nNodes; n++) {
ControlNode& node = *nodes[n];
currentLive = liveness.liveOut[n];
InstructionList& instructions = node.getInstructions();
for (InstructionList::iterator i = instructions.end(); !instructions.done(i); i = instructions.retreat(i)) {
Instruction& instruction = instructions.get(i);
InstructionUse* useBegin = instruction.getInstructionUseBegin();
InstructionUse* useEnd = instruction.getInstructionUseEnd();
InstructionUse* usePtr;
InstructionDefine* defineBegin = instruction.getInstructionDefineBegin();
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
InstructionDefine* definePtr;
if ((instruction.getFlags() & ifCopy) != 0) {
assert(useBegin != useEnd && useBegin[0].isRegister());
currentLive.clear(name2range[useBegin[0].getRegisterName()]);
}
for (definePtr = defineBegin; definePtr < defineEnd; definePtr++)
if (definePtr->isRegister()) {
RegisterName define = name2range[definePtr->getRegisterName()];
for (SparseSet::iterator l = currentLive.begin(); !currentLive.done(l); l = currentLive.advance(l)) {
RegisterName live = RegisterName(currentLive.get(l));
if (define != live && registerAllocator.canInterfere(define, live))
addEdge(define, live);
}
}
for (definePtr = defineBegin; definePtr < defineEnd; definePtr++)
if (definePtr->isRegister())
currentLive.clear(name2range[definePtr->getRegisterName()]);
for (usePtr = useBegin; usePtr < useEnd; usePtr++)
if (usePtr->isRegister())
currentLive.set(name2range[usePtr->getRegisterName()]);
for (usePtr = useBegin; usePtr < useEnd; usePtr++)
if (usePtr->isRegister()) {
RegisterName use = name2range[usePtr->getRegisterName()];
for (SparseSet::iterator l = currentLive.begin(); !currentLive.done(l); l = currentLive.advance(l)) {
RegisterName live = RegisterName(currentLive.get(l));
if (use != live && registerAllocator.canInterfere(use, live))
addEdge(use, live);
}
}
}
}
}
template <class RegisterPressure>
void LiveRangeGraph<RegisterPressure>::addEdge(RegisterName name1, RegisterName name2)
{
assert(name1 != name2);
edges->set(name1 * rangeCount + name2);
}
template <class RegisterPressure>
bool LiveRangeGraph<RegisterPressure>::haveEdge(RegisterName name1, RegisterName name2)
{
assert(name1 != name2);
return edges->test(name1 * rangeCount + name2);
}
#ifdef DEBUG_LOG
template <class RegisterPressure>
void LiveRangeGraph<RegisterPressure>::printPretty(LogModuleObject log)
{
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("Live ranges graph:\n"));
for (RegisterName name1 = RegisterName(1); name1 < rangeCount; name1 = RegisterName(name1 + 1)) {
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\t%d:\t", name1));
for (RegisterName name2 = RegisterName(1); name2 < rangeCount; name2 = RegisterName(name2 + 1))
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("%c", ((name1 != name2) && haveEdge(name1, name2)) ? '1' : '0'));
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\n"));
}
}
#endif // DEBUG_LOG
#endif // _LIVE_RANGE_GRAPH_

View File

@@ -0,0 +1,21 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "Fundamentals.h"
#include "Liveness.h"

View File

@@ -0,0 +1,301 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _LIVENESS_H_
#define _LIVENESS_H_
#include "Fundamentals.h"
#include "ControlGraph.h"
#include "ControlNodes.h"
#include "Instruction.h"
#include "RegisterTypes.h"
// ----------------------------------------------------------------------------
// LivenessInfo -
template <class RegisterPressure>
struct LivenessInfo
{
RegisterPressure::Set* liveIn;
RegisterPressure::Set* liveOut;
DEBUG_LOG_ONLY(Uint32 size);
#ifdef DEBUG_LOG
void printPretty(LogModuleObject log);
#endif // DEBUG_LOG
};
// ----------------------------------------------------------------------------
// Liveness
//
// The liveness is defined by the following data-flow equations:
//
// LiveIn(n) = LocalLive(n) U (LiveOut(n) - Killed(n)).
// LiveOut(n) = U LiveIn(s) (s a successor of n).
//
// where LocalLive(n) is the set of used registers in the block n, Killed(n)
// is the set of defined registers in the block n, LiveIn(n) is the set of
// live registers at the begining of the block n and LiveOut(n) is the set
// of live registers at the end of the block n.
//
//
// We will compute the liveness analysis in two stages:
//
// 1- Build LocalLive(n) (wich is an approximation of LiveIn(n)) and Killed(n)
// for each block n.
// 2- Perform a backward data-flow analysis to propagate the liveness information
// through the entire control-flow graph.
//
template <class RegisterPressure>
struct Liveness
{
static LivenessInfo<RegisterPressure> analysis(ControlGraph& controlGraph, Uint32 rangeCount, const RegisterName* name2range);
static LivenessInfo<RegisterPressure> analysis(ControlGraph& controlGraph, Uint32 nameCount);
};
template <class RegisterPressure>
LivenessInfo<RegisterPressure> Liveness<RegisterPressure>::analysis(ControlGraph& controlGraph, Uint32 rangeCount, const RegisterName* name2range)
{
Pool& pool = controlGraph.pool;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
// Allocate the temporary sets.
RegisterPressure::Set* killed = new(pool) RegisterPressure::Set[nNodes](pool, rangeCount);
// Allocate the globals sets.
RegisterPressure::Set* liveIn = new(pool) RegisterPressure::Set[nNodes](pool, rangeCount);
RegisterPressure::Set* liveOut = new(pool) RegisterPressure::Set[nNodes](pool, rangeCount);
// First stage of the liveness analysis: Compute the sets LocalLive(stored in LiveIn) and Killed.
//
for (Uint32 n = 0; n < (nNodes - 1); n++) {
ControlNode& node = *nodes[n];
RegisterPressure::Set& currentLocalLive = liveIn[n];
RegisterPressure::Set& currentKilled = killed[n];
// Find the instructions contributions to the sets LocalLive and Killed.
//
InstructionList& instructions = node.getInstructions();
for (InstructionList::iterator i = instructions.begin(); !instructions.done(i); i = instructions.advance(i)) {
Instruction& instruction = instructions.get(i);
// If a VirtualRegister is 'used' before being 'defined' then we add it to set LocalLive.
InstructionUse* useEnd = instruction.getInstructionUseEnd();
for (InstructionUse* usePtr = instruction.getInstructionUseBegin(); usePtr < useEnd; usePtr++)
if (usePtr->isRegister()) {
Uint32 index = name2range[usePtr->getRegisterName()];
if (!currentKilled.test(index))
currentLocalLive.set(index);
}
// If a Virtualregister is 'defined' then we add it to the set Killed.
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
for (InstructionDefine* definePtr = instruction.getInstructionDefineBegin(); definePtr < defineEnd; definePtr++)
if (definePtr->isRegister())
currentKilled.set(name2range[definePtr->getRegisterName()]);
}
}
// Second stage of the liveness analysis: We propagate the LiveIn & LiveOut through the entire
// control-flow graph.
//
RegisterPressure::Set temp(pool, rangeCount);
bool changed;
do {
changed = false;
// For all nodes is this graph except the endNode.
for (Int32 n = (nNodes - 2); n >= 0; n--) {
ControlNode& node = *nodes[n];
RegisterPressure::Set& currentLiveIn = liveIn[n];
RegisterPressure::Set& currentLiveOut = liveOut[n];
// Compute temp = Union of LiveIn(s) (s a successor of this node) | usedByPhiNodes(n).
// temp will be the new LiveOut(n).
Uint32 nSuccessors = node.nSuccessors();
if (nSuccessors != 0) {
temp = liveIn[node.nthSuccessor(0).getTarget().dfsNum];
for (Uint32 s = 1; s < nSuccessors; s++)
temp |= liveIn[node.nthSuccessor(s).getTarget().dfsNum];
} else
temp.clear();
// If temp and LiveOut(n) differ then set LiveOut(n) = temp and recalculate the
// new LiveIn(n).
if (currentLiveOut != temp) {
currentLiveOut = temp;
temp -= killed[n]; // FIX: could be optimized with one call to unionDiff !
temp |= currentLiveIn;
if (currentLiveIn != temp) {
currentLiveIn = temp;
changed = true;
}
}
}
} while(changed);
LivenessInfo<RegisterPressure> liveness;
liveness.liveIn = liveIn;
liveness.liveOut = liveOut;
DEBUG_LOG_ONLY(liveness.size = nNodes);
return liveness;
}
template <class RegisterPressure>
LivenessInfo<RegisterPressure> Liveness<RegisterPressure>::analysis(ControlGraph& controlGraph, Uint32 nameCount)
{
Pool& pool = controlGraph.pool;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
// Allocate the temporary sets.
RegisterPressure::Set* killed = new(pool) RegisterPressure::Set[nNodes](pool, nameCount);
RegisterPressure::Set* usedByPhiNodes = NULL;
// Allocate the globals sets.
RegisterPressure::Set* liveIn = new(pool) RegisterPressure::Set[nNodes](pool, nameCount);
RegisterPressure::Set* liveOut = new(pool) RegisterPressure::Set[nNodes](pool, nameCount);
// First stage of the liveness analysis: Compute the sets LocalLive(stored in LiveIn) and Killed.
//
for (Uint32 n = 0; n < (nNodes - 1); n++) {
ControlNode& node = *nodes[n];
RegisterPressure::Set& currentLocalLive = liveIn[n];
RegisterPressure::Set& currentKilled = killed[n];
InstructionList& phiNodes = node.getPhiNodeInstructions();
if ((usedByPhiNodes == NULL) && !phiNodes.empty())
usedByPhiNodes = new(pool) RegisterPressure::Set[nNodes](pool, nameCount);
for (InstructionList::iterator p = phiNodes.begin(); !phiNodes.done(p); p = phiNodes.advance(p)) {
Instruction& phiNode = phiNodes.get(p);
InstructionDefine& define = phiNode.getInstructionDefineBegin()[0];
currentKilled.set(define.getRegisterName());
typedef DoublyLinkedList<ControlEdge> ControlEdgeList;
const ControlEdgeList& predecessors = node.getPredecessors();
ControlEdgeList::iterator p = predecessors.begin();
InstructionUse* useEnd = phiNode.getInstructionUseEnd();
for (InstructionUse* usePtr = phiNode.getInstructionUseBegin(); usePtr < useEnd; usePtr++, p = predecessors.advance(p))
if (usePtr->isRegister())
usedByPhiNodes[predecessors.get(p).getSource().dfsNum].set(usePtr->getRegisterName());
}
// Find the instructions contributions to the sets LocalLive and Killed.
//
InstructionList& instructions = node.getInstructions();
for (InstructionList::iterator i = instructions.begin(); !instructions.done(i); i = instructions.advance(i)) {
Instruction& instruction = instructions.get(i);
// If a VirtualRegister is 'used' before being 'defined' then we add it to set LocalLive.
InstructionUse* useEnd = instruction.getInstructionUseEnd();
for (InstructionUse* usePtr = instruction.getInstructionUseBegin(); usePtr < useEnd; usePtr++)
if (usePtr->isRegister()) {
Uint32 index = usePtr->getRegisterName();
if (!currentKilled.test(index))
currentLocalLive.set(index);
}
// If a Virtualregister is 'defined' then we add it to the set Killed.
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
for (InstructionDefine* definePtr = instruction.getInstructionDefineBegin(); definePtr < defineEnd; definePtr++)
if (definePtr->isRegister())
currentKilled.set(definePtr->getRegisterName());
}
}
// Second stage of the liveness analysis: We propagate the LiveIn & LiveOut through the entire
// control-flow graph.
//
RegisterPressure::Set temp(pool, nameCount);
bool changed;
do {
changed = false;
// For all nodes is this graph except the endNode.
for (Int32 n = (nNodes - 2); n >= 0; n--) {
ControlNode& node = *nodes[n];
RegisterPressure::Set& currentLiveIn = liveIn[n];
RegisterPressure::Set& currentLiveOut = liveOut[n];
// Compute temp = Union of LiveIn(s) (s a successor of this node) | usedByPhiNodes(n).
// temp will be the new LiveOut(n).
Uint32 nSuccessors = node.nSuccessors();
if (nSuccessors != 0) {
temp = liveIn[node.nthSuccessor(0).getTarget().dfsNum];
for (Uint32 s = 1; s < nSuccessors; s++)
temp |= liveIn[node.nthSuccessor(s).getTarget().dfsNum];
} else
temp.clear();
// Insert the phiNodes contribution.
if (usedByPhiNodes != NULL)
temp |= usedByPhiNodes[n];
// If temp and LiveOut(n) differ then set LiveOut(n) = temp and recalculate the
// new LiveIn(n).
if (currentLiveOut != temp) {
currentLiveOut = temp;
temp -= killed[n]; // FIX: could be optimized with one call to unionDiff !
temp |= currentLiveIn;
if (currentLiveIn != temp) {
currentLiveIn = temp;
changed = true;
}
}
}
} while(changed);
LivenessInfo<RegisterPressure> liveness;
liveness.liveIn = liveIn;
liveness.liveOut = liveOut;
DEBUG_LOG_ONLY(liveness.size = nNodes);
return liveness;
}
#ifdef DEBUG_LOG
template <class RegisterPressure>
void LivenessInfo<RegisterPressure>::printPretty(LogModuleObject log)
{
for (Uint32 n = 0; n < size; n++) {
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("Node N%d:\n\tliveIn = ", n));
liveIn[n].printPretty(log);
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\tliveOut = "));
liveOut[n].printPretty(log);
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\n"));
}
}
#endif // DEBUG_LOG
#endif // _LIVENESS_H_

View File

@@ -0,0 +1,40 @@
#! gmake
DEPTH = ../..
MODULE_NAME = RegisterAllocator
include $(DEPTH)/config/config.mk
INCLUDES += \
-I$(DEPTH)/Utilities/General \
-I$(DEPTH)/Utilities/zlib \
-I$(DEPTH)/Runtime/ClassReader \
-I$(DEPTH)/Runtime/NativeMethods \
-I$(DEPTH)/Runtime/System \
-I$(DEPTH)/Runtime/ClassInfo \
-I$(DEPTH)/Runtime/FileReader \
-I$(DEPTH)/Compiler/PrimitiveGraph \
-I$(DEPTH)/Compiler/FrontEnd \
-I$(DEPTH)/Compiler/Optimizer \
-I$(DEPTH)/Compiler/CodeGenerator \
-I$(DEPTH)/Compiler/CodeGenerator/md \
-I$(DEPTH)/Compiler/CodeGenerator/md/$(CPU_ARCH) \
-I$(DEPTH)/Compiler/RegisterAllocator \
-I$(DEPTH)/Driver/StandAloneJava \
-I$(DEPTH)/Debugger \
$(NULL)
CXXSRCS = \
RegisterAllocator.cpp \
RegisterAllocatorTools.cpp \
DominatorGraph.cpp \
VirtualRegister.cpp \
BitSet.cpp \
SparseSet.cpp \
$(NULL)
include $(DEPTH)/config/rules.mk
libs:: $(MODULE)

View File

@@ -0,0 +1,392 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _PHI_NODE_REMOVER_H_
#define _PHI_NODE_REMOVER_H_
#include "Fundamentals.h"
#include "Pool.h"
#include "ControlGraph.h"
#include "DominatorGraph.h"
#include "VirtualRegister.h"
#include "RegisterPressure.h"
#include "Liveness.h"
#include "Instruction.h"
#include "InstructionEmitter.h"
#include "SparseSet.h"
#include <string.h>
//------------------------------------------------------------------------------
// RegisterNameNode -
struct RegisterNameNode
{
RegisterNameNode* next;
RegisterName newName;
Uint32 nextPushed;
};
//------------------------------------------------------------------------------
// CopyData -
struct CopyData
{
RegisterName source;
RegisterClassKind classKind;
Uint32 useCount;
bool isLiveOut;
RegisterName sourceNameToUse;
RegisterName temporaryName;
RegisterNameNode* newName;
};
//------------------------------------------------------------------------------
// PhiNodeRemover<RegisterPressure> -
template <class RegisterPressure>
struct PhiNodeRemover
{
// Replace the phi nodes by copy instructions.
static void replacePhiNodes(ControlGraph& controlGraph, VirtualRegisterManager& vrManager, InstructionEmitter& emitter);
};
// Split some of the critical edges and return true if there are still some
// in the graph after that.
//
static bool splitCriticalEdges(ControlGraph& /*cg*/)
{
// FIX: not implemented.
return true;
}
inline void pushName(Pool& pool, RegisterNameNode** stack, SparseSet& pushed, Uint32* nodeListPointer, RegisterName oldName, RegisterName newName)
{
RegisterNameNode& newNode = *new(pool) RegisterNameNode();
if (pushed.test(oldName))
(*stack)->newName = newName;
else {
newNode.newName = newName;
newNode.nextPushed = *nodeListPointer;
*nodeListPointer = oldName;
newNode.next = *stack;
*stack = &newNode;
pushed.set(oldName);
}
}
template <class RegisterPressure>
void PhiNodeRemover<RegisterPressure>::replacePhiNodes(ControlGraph& controlGraph, VirtualRegisterManager& vrManager, InstructionEmitter& emitter)
{
Pool& pool = controlGraph.pool;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
// Initialize the local variables.
//
// When we insert the copies we will also need to create new VirtualRegisters for
// the insertion of temporaries. The maximum number of temporary register will not
// exceed the number of phiNodes in the primitive graph.
Uint32 nameCount = vrManager.getSize();
Uint32 maxNameCount = nameCount;
for (Uint32 n = 0; n < nNodes; n++)
maxNameCount += nodes[n]->getPhiNodes().length();
// If the CFG contains some critical edges (backward edge which source has more than one
// outgoing edge and destination has more than one incomimg edge) then we need the liveness
// information to be able to insert temporary copies.
RegisterPressure::Set* liveOut = NULL;
if (splitCriticalEdges(controlGraph))
liveOut = Liveness<LowRegisterPressure>::analysis(controlGraph, nameCount).liveOut;
DominatorGraph dGraph(controlGraph);
SparseSet pushed(pool, maxNameCount);
SparseSet destinationList(pool, maxNameCount);
SparseSet workList(pool, maxNameCount);
CopyData* copyStats = new(pool) CopyData[maxNameCount];
memset(copyStats, '\0', maxNameCount*sizeof(CopyData));
struct NodeStack {
Uint32* next;
Uint32* limit;
Uint32 pushedList;
};
// Allocate the node stack and initialize the node stack pointer.
NodeStack* nodeStack = new(pool) NodeStack[nNodes + 1];
NodeStack* nodeStackPtr = nodeStack;
// We start by the begin node.
Uint32 startNode = 0;
Uint32* next = &startNode;
Uint32* limit = &startNode + 1;
while (true) {
if (next == limit) {
// If there are no more node in the sibling, we have to pop the current
// frame from the stack and update the copyStats of the pushed nodes.
//
if (nodeStackPtr == nodeStack)
// We are at the bottom of the stack and there are no more nodes
// to look at. We are done !
break;
--nodeStackPtr;
// We are done with all the children of this node in the dominator tree.
// We need to update the copy information of all the new names pushed
// during the walk over this node.
Uint32 pushedList = nodeStackPtr->pushedList;
while (pushedList != 0) {
Uint32 nextName = copyStats[pushedList].newName->nextPushed;
copyStats[pushedList].newName = copyStats[pushedList].newName->next;
pushedList = nextName;
}
// restore the previous frame.
next = nodeStackPtr->next;
limit = nodeStackPtr->limit;
} else {
Uint32 currentNode = *next++;
Uint32 pushedList = 0;
// Initialize the sets.
pushed.clear();
destinationList.clear();
// STEP1:
// Walk the instruction list and to replace all the instruction uses with their new name.
// If the instruction is a phi node and its defined register is alive at the end of this
// block then we push the defined register into the stack.
//
ControlNode& node = *nodes[currentNode];
RegisterPressure::Set* currentLiveOut = (liveOut != NULL) ? &liveOut[currentNode] : (RegisterPressure::Set*) 0;
InstructionList& phiNodes = node.getPhiNodeInstructions();
for (InstructionList::iterator p = phiNodes.begin(); !phiNodes.done(p); p = phiNodes.advance(p)) {
Instruction& phiNode = phiNodes.get(p);
InstructionUse* useEnd = phiNode.getInstructionUseEnd();
for (InstructionUse* usePtr = phiNode.getInstructionUseBegin(); usePtr < useEnd; usePtr++) {
assert(usePtr->isRegister());
RegisterName name = usePtr->getRegisterName();
if (copyStats[name].newName != NULL && copyStats[name].newName->newName != name)
usePtr->setRegisterName(copyStats[name].newName->newName);
}
if (currentLiveOut != NULL) {
// This is a phi node and we have to push its defined name if it is live
// at the end of the node. We only need to do this if the CFG has critical edges.
assert(phiNode.getInstructionDefineBegin() != phiNode.getInstructionDefineEnd() && phiNode.getInstructionDefineBegin()[0].isRegister());
RegisterName name = phiNode.getInstructionDefineBegin()[0].getRegisterName();
if (currentLiveOut->test(name))
pushName(pool, &(copyStats[name].newName), pushed, &pushedList, name, name);
}
}
InstructionList& instructions = node.getInstructions();
for (InstructionList::iterator i = instructions.begin(); !instructions.done(i); i = instructions.advance(i)) {
Instruction& instruction = instructions.get(i);
InstructionUse* useEnd = instruction.getInstructionUseEnd();
for (InstructionUse* usePtr = instruction.getInstructionUseBegin(); usePtr < useEnd; usePtr++)
if (usePtr->isRegister()) {
RegisterName name = usePtr->getRegisterName();
if (copyStats[name].newName != NULL && copyStats[name].newName->newName != name)
usePtr->setRegisterName(copyStats[name].newName->newName);
}
}
// STEP2:
// Look at this node's successors' phiNodes. We keep track of the number of time
// a VR will be used by another copy instruction and insert each definition into the
// destinationList. This is the only pass over this node's successors as we will
// get all the information we need in the CopyData structures.
//
ControlEdge* successorEdgeEnd = node.getSuccessorsEnd();
for (ControlEdge* successorEdgePtr = node.getSuccessorsBegin(); successorEdgePtr < successorEdgeEnd; successorEdgePtr++) {
Uint32 useIndex = successorEdgePtr->getIndex();
ControlNode& successor = successorEdgePtr->getTarget();
// Look at its phi nodes. The phi nodes are at the top of the instruction list. We exit
// as soon as we find an instruction which is not a phi node
InstructionList& phiNodes = successor.getPhiNodeInstructions();
for (InstructionList::iterator p = phiNodes.begin(); !phiNodes.done(p); p = phiNodes.advance(p)) {
Instruction& phiNode = phiNodes.get(p);
assert((phiNode.getInstructionUseBegin() + useIndex) < phiNode.getInstructionUseEnd());
assert(phiNode.getInstructionDefineBegin() != phiNode.getInstructionDefineEnd());
InstructionUse& source = phiNode.getInstructionUseBegin()[useIndex];
InstructionDefine& destination = phiNode.getInstructionDefineBegin()[0];
assert(source.isRegister() && destination.isRegister());
RegisterName sourceName = source.getRegisterName();
RegisterName destinationName = destination.getRegisterName();
// Get the correct name for the source.
if (copyStats[sourceName].newName != NULL)
sourceName = copyStats[sourceName].newName->newName;
// Update the CopyData structures.
if ((sourceName != rnInvalid) && (sourceName != destinationName)) {
copyStats[destinationName].source = sourceName;
copyStats[destinationName].classKind = destination.getRegisterClass();
copyStats[destinationName].isLiveOut = (currentLiveOut != NULL) ? currentLiveOut->test(destinationName) : false;
copyStats[destinationName].sourceNameToUse = destinationName;
copyStats[sourceName].sourceNameToUse = sourceName;
copyStats[sourceName].useCount++;
destinationList.set(destinationName);
}
}
}
// STEP3:
// Insert into the worklist only the destination registers that will be not used in
// another copy instruction in this block.
//
assert(workList.getSize() == 0);
for (SparseSet::iterator d = destinationList.begin(); !destinationList.done(d); d = destinationList.advance(d)) {
Uint32 dest = destinationList.get(d);
if (copyStats[dest].useCount == 0)
workList.set(dest);
}
// STEP4:
// Insert the copy instructions.
//
Uint32 destinationListSize = destinationList.getSize();
InstructionList::iterator endOfTheNode = instructions.end();
// Find the right place to insert the copy instructions.
if (destinationListSize != 0)
while (instructions.get(endOfTheNode).getFlags() & ifControl)
endOfTheNode = instructions.retreat(endOfTheNode);
while (destinationListSize != 0) {
while(workList.getSize()) {
RegisterName destinationName = RegisterName(workList.getOne());
RegisterName sourceName = copyStats[destinationName].source;
workList.clear(destinationName);
if (copyStats[destinationName].isLiveOut && !copyStats[destinationName].temporaryName) {
// Lost copy problem.
copyStats[destinationName].isLiveOut = false;
RegisterName sourceName = destinationName;
RegisterClassKind classKind = copyStats[sourceName].classKind;
RegisterName destinationName = getName(vrManager.newVirtualRegister(classKind));
assert(destinationName < maxNameCount);
copyStats[destinationName].classKind = classKind;
copyStats[sourceName].useCount = 0;
// We need to insert a copy to a temporary register to keep the
// source register valid at the end of the node defining it.
// This copy will be inserted right after the phi node defining it.
RegisterName from = copyStats[sourceName].sourceNameToUse;
Instruction* definingPhiNode = vrManager.getVirtualRegister(from).getDefiningInstruction();
assert(definingPhiNode && (definingPhiNode->getFlags() & ifPhiNode) != 0);
RegisterID fromID = buildRegisterID(from, classKind);
RegisterID toID = buildRegisterID(destinationName, classKind);
Instruction& copy = emitter.newCopy(*definingPhiNode->getPrimitive(), fromID, toID);
vrManager.getVirtualRegister(destinationName).setDefiningInstruction(copy);
definingPhiNode->getPrimitive()->getContainer()->getInstructions().addFirst(copy);
copyStats[sourceName].temporaryName = destinationName;
copyStats[sourceName].sourceNameToUse = destinationName;
pushName(pool, &(copyStats[sourceName].newName), pushed, &pushedList, sourceName, destinationName);
}
// Insert the copy instruction at the end of the current node.
RegisterName from = copyStats[sourceName].sourceNameToUse;
RegisterClassKind classKind = copyStats[destinationName].classKind;
RegisterID fromID = buildRegisterID(from, classKind);
RegisterID toID = buildRegisterID(destinationName, classKind);
Instruction& copy = emitter.newCopy(*vrManager.getVirtualRegister(from).getDefiningInstruction()->getPrimitive(), fromID, toID);
instructions.insertAfter(copy, endOfTheNode);
endOfTheNode = instructions.advance(endOfTheNode);
copyStats[sourceName].useCount = 0;
if (destinationList.test(sourceName) && copyStats[sourceName].isLiveOut)
pushName(pool, &(copyStats[sourceName].newName), pushed, &pushedList, sourceName, destinationName);
copyStats[sourceName].isLiveOut = false;
copyStats[sourceName].sourceNameToUse = destinationName;
if (destinationList.test(sourceName))
workList.set(sourceName);
destinationList.clear(destinationName);
}
destinationListSize = destinationList.getSize();
if (destinationListSize != 0) {
RegisterName sourceName = RegisterName(destinationList.getOne());
RegisterName destinationName;
if (!copyStats[sourceName].temporaryName) {
// Cycle problem.
RegisterClassKind classKind = copyStats[sourceName].classKind;
destinationName = getName(vrManager.newVirtualRegister(classKind));
assert(destinationName < maxNameCount);
copyStats[destinationName].classKind = classKind;
copyStats[sourceName].temporaryName = destinationName;
// Insert the copy instruction at the end of the current node.
RegisterName from = copyStats[sourceName].sourceNameToUse;
RegisterID fromID = buildRegisterID(from, classKind);
RegisterID toID = buildRegisterID(destinationName, classKind);
Instruction& copy = emitter.newCopy(*vrManager.getVirtualRegister(from).getDefiningInstruction()->getPrimitive(), fromID, toID);
vrManager.getVirtualRegister(destinationName).setDefiningInstruction(copy);
instructions.insertAfter(copy, endOfTheNode);
endOfTheNode = instructions.advance(endOfTheNode);
} else
destinationName = copyStats[sourceName].temporaryName;
copyStats[sourceName].useCount = 0;
copyStats[sourceName].isLiveOut = false;
copyStats[sourceName].sourceNameToUse = destinationName;
pushName(pool, &(copyStats[sourceName].newName), pushed, &pushedList, sourceName, destinationName);
workList.set(sourceName);
}
}
nodeStackPtr->pushedList = pushedList;
nodeStackPtr->next = next;
nodeStackPtr->limit = limit;
++nodeStackPtr;
next = dGraph.getSuccessorsBegin(currentNode);
limit = dGraph.getSuccessorsEnd(currentNode);
}
}
}
#endif // _PHI_NODE_REMOVER_H_

View File

@@ -0,0 +1,155 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "Fundamentals.h"
#include "LogModule.h"
#include "RegisterAllocator.h"
#include "RegisterPressure.h"
#include "RegisterAllocatorTools.h"
#include "PhiNodeRemover.h"
#include "LiveRange.h"
#include "Liveness.h"
#include "InterferenceGraph.h"
#include "LiveRangeGraph.h"
#include "Coalescing.h"
#include "Spilling.h"
#include "Coloring.h"
#include "Splits.h"
class Pool;
class ControlGraph;
class VirtualRegisterManager;
class InstructionEmitter;
UT_DEFINE_LOG_MODULE(RegAlloc);
void RegisterAllocator::allocateRegisters(Pool& pool, ControlGraph& controlGraph, VirtualRegisterManager& vrManager, InstructionEmitter& emitter)
{
// Insert the phi node instructions. We want to do this to have a single defined register per instruction.
// If we keep the PhiNode (as a DataNode) and a PhiNode is of DoubleWordKind then we have to execute
// some special code for the high word annotation.
//
RegisterAllocatorTools::insertPhiNodeInstructions(controlGraph, emitter);
// Perform some tests on the instruction graph.
//
DEBUG_ONLY(RegisterAllocatorTools::testTheInstructionGraph(controlGraph, vrManager));
// Replace the phi node instructions by their equivalent copy instructions.
//
PhiNodeRemover<LowRegisterPressure>::replacePhiNodes(controlGraph, vrManager, emitter);
// Do the register allocation.
//
RegisterAllocator registerAllocator(pool, controlGraph, vrManager, emitter);
registerAllocator.doGraphColoring();
}
void RegisterAllocator::doGraphColoring()
{
// Initialize the liverange map.
//
initLiveRanges();
// Build the live ranges. We do this to compress the number of RegisterNames
// used in the insterference graph.
//
LiveRange<LowRegisterPressure>::build(*this);
// Remove unnecessary copies.
//
RegisterAllocatorTools::removeUnnecessaryCopies(*this);
for (Uint8 loop = 0; loop < 10; loop++) {
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("********* RegisterAllocator loop %d *********\n", loop));
while(true) {
// Build the interference graph.
//
iGraph.build();
// Coalesce the copy instructions.
//
if (!Coalescing<LowRegisterPressure>::coalesce(*this))
break;
}
// Print the interference graph.
//
DEBUG_LOG_ONLY(iGraph.printPretty(UT_LOG_MODULE(RegAlloc)));
// Calculate the spill costs.
//
Spilling<LowRegisterPressure>::calculateSpillCosts(*this);
DEBUG_LOG_ONLY(RegisterAllocatorTools::printSpillCosts(*this));
// Calculate the split costs.
//
Splits<LowRegisterPressure>::calculateSplitCosts(*this);
DEBUG_LOG_ONLY(RegisterAllocatorTools::printSplitCosts(*this));
// Build the live range graph.
//
lGraph.build();
DEBUG_LOG_ONLY(lGraph.printPretty(UT_LOG_MODULE(RegAlloc)));
// Color the graph. If it succeeds then we're done with the
// register allocation.
//
if (Coloring<LowRegisterPressure>::color(*this)) {
// Write the final colors in the instruction graph.
//
Coloring<LowRegisterPressure>::finalColoring(*this);
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("********** RegisterAllocator done **********\n"));
DEBUG_LOG_ONLY(RegisterAllocatorTools::printInstructions(*this));
return;
}
// We need to spill some registers.
//
Spilling<LowRegisterPressure>::insertSpillCode(*this);
// Insert the split instructions.
//
Splits<LowRegisterPressure>::insertSplitCode(*this);
// Update the live ranges.
//
// FIX
}
#ifdef DEBUG_LOG
RegisterAllocatorTools::updateInstructionGraph(*this);
RegisterAllocatorTools::printInstructions(*this);
#endif
fprintf(stderr, "!!! Coloring failed after 10 loops !!!\n");
abort();
}
void RegisterAllocator::initLiveRanges()
{
Uint32 count = this->nameCount;
RegisterName* name2range = new(pool) RegisterName[nameCount];
for (RegisterName r = RegisterName(1); r < count; r = RegisterName(r + 1))
name2range[r] = r;
this->name2range = name2range;
rangeCount = count;
}

View File

@@ -0,0 +1,88 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _REGISTER_ALLOCATOR_H_
#define _REGISTER_ALLOCATOR_H_
class Pool;
class ControlGraph;
class InstructionEmitter;
struct SpillCost;
struct SplitCost;
#include "Liveness.h"
#include "VirtualRegister.h"
#include "RegisterPressure.h" // This should included by Backend.cpp
#include "InterferenceGraph.h"
#include "LiveRangeGraph.h"
//template <class RegisterPressure>
class RegisterAllocator
{
public:
Pool& pool; //
ControlGraph& controlGraph; //
VirtualRegisterManager& vrManager; //
InstructionEmitter& emitter; //
RegisterName* name2range; //
RegisterName* color; //
SpillCost* spillCost; //
SparseSet* willSpill; //
SplitCost* splitCost; //
NameLinkedList** splitAround; //
InterferenceGraph<LowRegisterPressure> iGraph; //
LiveRangeGraph<LowRegisterPressure> lGraph; //
LivenessInfo<LowRegisterPressure> liveness; //
Uint32 nameCount; //
Uint32 rangeCount; //
bool splitFound; //
private:
//
//
void doGraphColoring();
public:
//
//
inline RegisterAllocator(Pool& pool, ControlGraph& controlGraph, VirtualRegisterManager& vrManager, InstructionEmitter& emitter);
//
//
bool canInterfere(RegisterName /*name1*/, RegisterName /*name2*/) const {return true;}
//
//
void initLiveRanges();
//
//
static void allocateRegisters(Pool& pool, ControlGraph& controlGraph, VirtualRegisterManager& vrManager, InstructionEmitter& emitter);
};
//
//
inline RegisterAllocator::RegisterAllocator(Pool& pool, ControlGraph& controlGraph, VirtualRegisterManager& vrManager, InstructionEmitter& emitter)
: pool(pool), controlGraph(controlGraph), vrManager(vrManager), emitter(emitter), iGraph(*this), lGraph(*this), nameCount(vrManager.getSize()) {}
#endif // _REGISTER_ALLOCATOR_H_

View File

@@ -0,0 +1,355 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "Fundamentals.h"
#include "LogModule.h"
#include "RegisterAllocatorTools.h"
#include "Pool.h"
#include "ControlGraph.h"
#include "ControlNodes.h"
#include "Primitives.h"
#include "InstructionEmitter.h"
#include "Instruction.h"
#include "RegisterAllocator.h"
#include "Spilling.h"
#include "Splits.h"
#include "BitSet.h"
UT_EXTERN_LOG_MODULE(RegAlloc);
#ifdef DEBUG
void RegisterAllocatorTools::testTheInstructionGraph(ControlGraph& controlGraph, VirtualRegisterManager& vrManager)
{
// Test the declared VirtualRegisters. The register allocator tries to condense the register universe.
// Any gap in the VirtualRegister names will be a loss of efficiency !!!!
Uint32 nameCount = vrManager.getSize();
BitSet registerSeen(controlGraph.pool, nameCount);
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
for (Uint32 n = 0; n < nNodes; n++) {
InstructionList& instructions = nodes[n]->getInstructions();
for (InstructionList::iterator i = instructions.begin(); !instructions.done(i); i = instructions.advance(i)) {
Instruction& instruction = instructions.get(i);
InstructionUse* useEnd = instruction.getInstructionUseEnd();
for (InstructionUse* usePtr = instruction.getInstructionUseBegin(); usePtr < useEnd; usePtr++)
if (usePtr->isRegister())
registerSeen.set(usePtr->getRegisterName());
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
for (InstructionDefine* definePtr = instruction.getInstructionDefineBegin(); definePtr < defineEnd; definePtr++)
if (definePtr->isRegister())
registerSeen.set(definePtr->getRegisterName());
}
InstructionList& phiNodes = nodes[n]->getPhiNodeInstructions();
for (InstructionList::iterator p = phiNodes.begin(); !phiNodes.done(p); p = phiNodes.advance(p)) {
Instruction& instruction = phiNodes.get(p);
InstructionUse* useEnd = instruction.getInstructionUseEnd();
for (InstructionUse* usePtr = instruction.getInstructionUseBegin(); usePtr < useEnd; usePtr++)
if (usePtr->isRegister())
registerSeen.set(usePtr->getRegisterName());
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
for (InstructionDefine* definePtr = instruction.getInstructionDefineBegin(); definePtr < defineEnd; definePtr++)
if (definePtr->isRegister())
registerSeen.set(definePtr->getRegisterName());
}
}
bool renameRegisters = false;
for (BitSet::iterator i = registerSeen.nextZero(0); !registerSeen.done(i); i = registerSeen.nextZero(i)) {
renameRegisters = true;
fprintf(stderr,
"WARNING: The VirtualRegister vr%d has been allocated during CodeGeneration but\n"
" is never used nor defined by any instruction in the instruction graph\n"
" PLEASE FIX \n",
i);
}
if (renameRegisters) {
Instruction** definingInstruction = new Instruction*[nameCount];
memset(definingInstruction, '\0', nameCount * sizeof(Instruction*));
RegisterName* newName = new RegisterName[nameCount];
memset(newName, '\0', nameCount * sizeof(RegisterName));
RegisterName nextName = RegisterName(1);
for (Uint32 n = 0; n < nNodes; n++) {
InstructionList& instructions = nodes[n]->getInstructions();
for (InstructionList::iterator i = instructions.begin(); !instructions.done(i); i = instructions.advance(i)) {
Instruction& instruction = instructions.get(i);
InstructionUse* useEnd = instruction.getInstructionUseEnd();
for (InstructionUse* usePtr = instruction.getInstructionUseBegin(); usePtr < useEnd; usePtr++)
if (usePtr->isRegister()) {
RegisterName name = usePtr->getRegisterName();
if (newName[name] == rnInvalid) {
newName[name] = nextName;
definingInstruction[nextName] = vrManager.getVirtualRegister(name).getDefiningInstruction();
nextName = RegisterName(nextName + 1);
}
usePtr->setRegisterName(newName[name]);
}
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
for (InstructionDefine* definePtr = instruction.getInstructionDefineBegin(); definePtr < defineEnd; definePtr++)
if (definePtr->isRegister()) {
RegisterName name = definePtr->getRegisterName();
if (newName[name] == rnInvalid) {
newName[name] = nextName;
definingInstruction[nextName] = vrManager.getVirtualRegister(name).getDefiningInstruction();
nextName = RegisterName(nextName + 1);
}
definePtr->setRegisterName(newName[name]);
}
}
InstructionList& phiNodes = nodes[n]->getPhiNodeInstructions();
for (InstructionList::iterator p = phiNodes.begin(); !phiNodes.done(p); p = phiNodes.advance(p)) {
Instruction& instruction = phiNodes.get(p);
InstructionUse* useEnd = instruction.getInstructionUseEnd();
for (InstructionUse* usePtr = instruction.getInstructionUseBegin(); usePtr < useEnd; usePtr++)
if (usePtr->isRegister()) {
RegisterName name = usePtr->getRegisterName();
if (newName[name] == rnInvalid) {
newName[name] = nextName;
definingInstruction[nextName] = vrManager.getVirtualRegister(name).getDefiningInstruction();
nextName = RegisterName(nextName + 1);
}
usePtr->setRegisterName(newName[name]);
}
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
for (InstructionDefine* definePtr = instruction.getInstructionDefineBegin(); definePtr < defineEnd; definePtr++)
if (definePtr->isRegister()) {
RegisterName name = definePtr->getRegisterName();
if (newName[name] == rnInvalid) {
newName[name] = nextName;
definingInstruction[nextName] = vrManager.getVirtualRegister(name).getDefiningInstruction();
nextName = RegisterName(nextName + 1);
}
definePtr->setRegisterName(newName[name]);
}
}
}
vrManager.setSize(nextName);
for (RegisterName r = RegisterName(1); r < nextName; r = RegisterName(r + 1))
vrManager.getVirtualRegister(r).definingInstruction = definingInstruction[r];
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("RegisterMap:\n"));
for (Uint32 i = 1; i < nameCount; i++)
if (newName[i] != 0)
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("\tvr%d becomes vr%d.\n", i, newName[i]));
else
UT_OBJECTLOG(UT_LOG_MODULE(RegAlloc), PR_LOG_ALWAYS, ("\tvr%d is dead.\n", i));
delete newName;
delete definingInstruction;
}
}
#endif // DEBUG
void RegisterAllocatorTools::removeUnnecessaryCopies(RegisterAllocator& registerAllocator)
{
ControlGraph& controlGraph = registerAllocator.controlGraph;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
RegisterName* name2range = registerAllocator.name2range;
for (Uint32 n = 0; n < nNodes; n++) {
InstructionList& instructions = nodes[n]->getInstructions();
for (InstructionList::iterator i = instructions.begin(); !instructions.done(i);) {
Instruction& instruction = instructions.get(i);
i = instructions.advance(i);
if (instruction.getFlags() & ifCopy) {
assert(instruction.getInstructionUseBegin() != instruction.getInstructionUseEnd() && instruction.getInstructionUseBegin()[0].isRegister());
assert(instruction.getInstructionDefineBegin() != instruction.getInstructionDefineEnd() && instruction.getInstructionDefineBegin()[0].isRegister());
RegisterName source = name2range[instruction.getInstructionUseBegin()[0].getRegisterName()];
RegisterName destination = name2range[instruction.getInstructionDefineBegin()[0].getRegisterName()];
if (source == destination)
instruction.remove();
}
}
}
}
void RegisterAllocatorTools::updateInstructionGraph(RegisterAllocator& registerAllocator)
{
ControlGraph& controlGraph = registerAllocator.controlGraph;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
RegisterName* name2range = registerAllocator.name2range;
for (Uint32 n = 0; n < nNodes; n++) {
InstructionList& instructions = nodes[n]->getInstructions();
for (InstructionList::iterator i = instructions.begin(); !instructions.done(i); i = instructions.advance(i)) {
Instruction& instruction = instructions.get(i);
InstructionUse* useEnd = instruction.getInstructionUseEnd();
for (InstructionUse* usePtr = instruction.getInstructionUseBegin(); usePtr < useEnd; usePtr++)
if (usePtr->isRegister())
usePtr->setRegisterName(name2range[usePtr->getRegisterName()]);
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
for (InstructionDefine* definePtr = instruction.getInstructionDefineBegin(); definePtr < defineEnd; definePtr++)
if (definePtr->isRegister())
definePtr->setRegisterName(name2range[definePtr->getRegisterName()]);
}
InstructionList& phiNodes = nodes[n]->getPhiNodeInstructions();
for (InstructionList::iterator p = phiNodes.begin(); !phiNodes.done(p); p = phiNodes.advance(p)) {
Instruction& instruction = phiNodes.get(p);
InstructionUse* useEnd = instruction.getInstructionUseEnd();
for (InstructionUse* usePtr = instruction.getInstructionUseBegin(); usePtr < useEnd; usePtr++)
if (usePtr->isRegister())
usePtr->setRegisterName(name2range[usePtr->getRegisterName()]);
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
for (InstructionDefine* definePtr = instruction.getInstructionDefineBegin(); definePtr < defineEnd; definePtr++)
if (definePtr->isRegister())
definePtr->setRegisterName(name2range[definePtr->getRegisterName()]);
}
}
}
void RegisterAllocatorTools::insertPhiNodeInstructions(ControlGraph& controlGraph, InstructionEmitter& emitter)
{
Pool& pool = controlGraph.pool;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
for (Uint32 n = 0; n < nNodes; n++) {
ControlNode& node = *nodes[n];
DoublyLinkedList<PhiNode>& phiNodes = node.getPhiNodes();
if (!phiNodes.empty()) {
// Set the index of the incoming edges.
Uint32 index = 0;
const DoublyLinkedList<ControlEdge>& predecessors = node.getPredecessors();
for (DoublyLinkedList<ControlEdge>::iterator p = predecessors.begin(); !predecessors.done(p); p = predecessors.advance(p))
predecessors.get(p).setIndex(index++);
// Insert the phi node instruction in the instruction list.
for (DoublyLinkedList<PhiNode>::iterator i = phiNodes.begin(); !phiNodes.done(i); i = phiNodes.advance(i)) {
PhiNode& phiNode = phiNodes.get(i);
ValueKind kind = phiNode.getKind();
if (!isStorableKind(kind))
continue;
RegisterClassKind classKind = rckGeneral; // FIX: get class kind from phi node kind.
Uint32 nInputs = phiNode.nInputs();
PhiNodeInstruction& phiNodeInstruction = *new(pool) PhiNodeInstruction(&phiNode, pool, nInputs);
emitter.defineProducer(phiNode, phiNodeInstruction, 0, classKind, drLow);
for (Uint32 whichInput = 0; whichInput < nInputs; whichInput++)
emitter.useProducer(phiNode.nthInputVariable(whichInput), phiNodeInstruction, whichInput, classKind, drLow);
node.addPhiNodeInstruction(phiNodeInstruction);
if (isDoublewordKind(kind)) {
PhiNodeInstruction& phiNodeInstruction = *new(pool) PhiNodeInstruction(&phiNode, pool, nInputs);
emitter.defineProducer(phiNode, phiNodeInstruction, 0, classKind, drHigh);
for (Uint32 whichInput = 0; whichInput < nInputs; whichInput++)
emitter.useProducer(phiNode.nthInputVariable(whichInput), phiNodeInstruction, whichInput, classKind, drHigh);
node.addPhiNodeInstruction(phiNodeInstruction);
}
}
}
}
}
#ifdef DEBUG_LOG
void RegisterAllocatorTools::printSpillCosts(RegisterAllocator& registerAllocator)
{
LogModuleObject log = UT_LOG_MODULE(RegAlloc);
Uint32 rangeCount = registerAllocator.rangeCount;
SpillCost* cost = registerAllocator.spillCost;
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("Spill costs:\n"));
for (Uint32 i = 1; i < rangeCount; i++) {
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\trange %d : ", i));
if (cost[i].infinite)
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("infinite\n"));
else
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("%f\n", cost[i].cost));
}
}
void RegisterAllocatorTools::printSplitCosts(RegisterAllocator& registerAllocator)
{
LogModuleObject log = UT_LOG_MODULE(RegAlloc);
Uint32 rangeCount = registerAllocator.rangeCount;
SplitCost* cost = registerAllocator.splitCost;
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("Split costs:\n"));
for (Uint32 i = 1; i < rangeCount; i++) {
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\trange %d : loads = %f stores = %f\n", i, cost[i].loads, cost[i].stores));
}
}
void RegisterAllocatorTools::printInstructions(RegisterAllocator& registerAllocator)
{
LogModuleObject log = UT_LOG_MODULE(RegAlloc);
ControlNode** nodes = registerAllocator.controlGraph.dfsList;
Uint32 nNodes = registerAllocator.controlGraph.nNodes;
for (Uint32 n = 0; n < nNodes; n++) {
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("N%d:\n", n));
InstructionList& phiNodes = nodes[n]->getPhiNodeInstructions();
InstructionList& instructions = nodes[n]->getInstructions();
if (!phiNodes.empty()) {
UT_OBJECTLOG(log, PR_LOG_ALWAYS, (" PhiNodes:\n", n));
for(InstructionList::iterator i = phiNodes.begin(); !phiNodes.done(i); i = phiNodes.advance(i)) {
phiNodes.get(i).printPretty(log);
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\n"));
}
if (!instructions.empty())
UT_OBJECTLOG(log, PR_LOG_ALWAYS, (" Instructions:\n", n));
}
for(InstructionList::iterator i = instructions.begin(); !instructions.done(i); i = instructions.advance(i)) {
instructions.get(i).printPretty(log);
UT_OBJECTLOG(log, PR_LOG_ALWAYS, ("\n"));
}
}
}
#endif // DEBUG_LOG

View File

@@ -0,0 +1,117 @@
// -*- mode:C++; tab-width:4; truncate-lines:t -*-
//
// CONFIDENTIAL AND PROPRIETARY SOURCE CODE OF
// NETSCAPE COMMUNICATIONS CORPORATION
// Copyright © 1996, 1997 Netscape Communications Corporation. All Rights
// Reserved. Use of this Source Code is subject to the terms of the
// applicable license agreement from Netscape Communications Corporation.
// The copyright notice(s) in this Source Code does not indicate actual or
// intended publication of this Source Code.
//
// $Id: RegisterAllocatorTools.h,v 1.1.2.1 1999-03-02 16:12:05 fur%netscape.com Exp $
//
#ifndef _REGISTER_ALLOCATOR_TOOLS_H_
#define _REGISTER_ALLOCATOR_TOOLS_H_
#include "LogModule.h"
#include "RegisterTypes.h"
#include <string.h>
class RegisterAllocator;
class ControlGraph;
class InstructionEmitter;
class VirtualRegisterManager;
struct RegisterAllocatorTools
{
//
//
static void insertPhiNodeInstructions(ControlGraph& controlGraph, InstructionEmitter& emitter);
//
//
static void updateInstructionGraph(RegisterAllocator& registerAllocator);
//
//
static void removeUnnecessaryCopies(RegisterAllocator& registerAllocator);
#ifdef DEBUG
//
//
static void testTheInstructionGraph(ControlGraph& controlGraph, VirtualRegisterManager& vrManager);
#endif // DEBUG
#ifdef DEBUG_LOG
//
//
static void printInstructions(RegisterAllocator& registerAllocator);
//
//
static void printSpillCosts(RegisterAllocator& registerAllocator);
//
//
static void printSplitCosts(RegisterAllocator& registerAllocator);
#endif // DEBUG_LOG
};
//
// FIX: this should go in a class (LookupTable ?)
//
inline RegisterName findRoot(RegisterName name, RegisterName* table)
{
RegisterName* stack = table;
RegisterName* stackPtr = stack;
RegisterName newName;
while((newName = table[name]) != name) {
*--stackPtr = name;
name = newName;
}
while (stackPtr != stack)
table[*stackPtr++] = name;
return name;
}
inline void init(RegisterName* table, Uint32 nameCount)
{
for (RegisterName r = RegisterName(0); r < nameCount; r = RegisterName(r + 1))
table[r] = r;
}
inline Uint32 compress(RegisterName* name2range, RegisterName* table, Uint32 nameCount, Uint32 tableSize)
{
RegisterName* liveRange = new RegisterName[tableSize];
memset(liveRange, '\0', tableSize * sizeof(RegisterName));
// Update the lookup table.
for (RegisterName r = RegisterName(1); r < tableSize; r = RegisterName(r + 1))
findRoot(r, table);
// Count the liveranges.
Uint32 liveRangeCount = 1;
for (RegisterName s = RegisterName(1); s < tableSize; s = RegisterName(s + 1))
if (table[s] == s)
liveRange[s] = RegisterName(liveRangeCount++);
for (RegisterName t = RegisterName(1); t < nameCount; t = RegisterName(t + 1))
name2range[t] = liveRange[table[name2range[t]]];
return liveRangeCount;
}
inline double doLog10(Uint32 power)
{
double log = 1.0;
while (power--)
log *= 10.0;
return log;
}
#endif // _REGISTER_ALLOCATOR_TOOLS_H_

View File

@@ -0,0 +1,38 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _REGISTER_ASSIGNER_H_
#define _REGISTER_ASSIGNER_H_
#include "Fundamentals.h"
#include "VirtualRegister.h"
class FastBitMatrix;
class RegisterAssigner
{
protected:
VirtualRegisterManager& vRegManager;
public:
RegisterAssigner(VirtualRegisterManager& vrMan) : vRegManager(vrMan) {}
virtual bool assignRegisters(FastBitMatrix& interferenceMatrix) = 0;
};
#endif /* _REGISTER_ASSIGNER_H_ */

View File

@@ -0,0 +1,25 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _REGISTER_CLASS_H_
#define _REGISTER_CLASS_H_
#include "Fundamentals.h"
#include "RegisterTypes.h"
#endif // _REGISTER_CLASS_H_

View File

@@ -0,0 +1,37 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _REGISTER_PRESSURE_H_
#define _REGISTER_PRESSURE_H_
#include "BitSet.h"
#include "HashSet.h"
struct LowRegisterPressure
{
typedef BitSet Set;
static const bool setIsOrdered = true;
};
struct HighRegisterPressure
{
typedef HashSet Set;
static const bool setIsOrdered = false;
};
#endif // _REGISTER_PRESSURE_H_

View File

@@ -0,0 +1,104 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _REGISTER_TYPES_H_
#define _REGISTER_TYPES_H_
#include "Fundamentals.h"
//------------------------------------------------------------------------------
// RegisterName -
//
enum RegisterName {
rnInvalid = 0,
};
//------------------------------------------------------------------------------
// RegisterClassKind -
//
enum RegisterClassKind {
rckInvalid = 0,
rckGeneral,
rckStackSlot,
nRegisterClassKind
};
//------------------------------------------------------------------------------
// RegisterID -
//
enum RegisterID {
invalidID = 0
};
//------------------------------------------------------------------------------
// RegisterKind -
//
enum RegisterKind {
rkCallerSave = 0,
rkCalleeSave,
};
struct NameLinkedList {
RegisterName name;
NameLinkedList* next;
};
#ifdef DEBUG
const registerNameMask = 0x03ffffff;
const coloredRegisterMask = 0x04000000;
const machineRegisterMask = 0x08000000;
const registerClassMask = 0xf0000000;
const registerNameShift = 0;
const coloredRegisterShift = 26;
const machineRegisterShift = 27;
const registerClassShift = 28;
#else // DEBUG
const registerNameMask = 0x0fffffff;
const registerClassMask = 0xf0000000;
const registerNameShift = 0;
const registerClassShift = 28;
#endif // DEBUG
inline RegisterClassKind getClass(RegisterID registerID) {return RegisterClassKind((registerID & registerClassMask) >> registerClassShift);}
inline RegisterName getName(RegisterID registerID) {return RegisterName((registerID & registerNameMask) >> registerNameShift);}
inline void setClass(RegisterID& registerID, RegisterClassKind classKind) {registerID = RegisterID((registerID & ~registerClassMask) | ((classKind << registerClassShift) & registerClassMask));}
inline void setName(RegisterID& registerID, RegisterName name) {assert((name & ~registerNameMask) == 0); registerID = RegisterID((registerID & ~registerNameMask) | ((name << registerNameShift) & registerNameMask));}
inline RegisterID buildRegisterID(RegisterName name, RegisterClassKind classKind) {return RegisterID(((classKind << registerClassShift) & registerClassMask) | ((name << registerNameShift) & registerNameMask));}
#ifdef DEBUG
inline bool isMachineRegister(RegisterID rid) {return (rid & machineRegisterMask) != 0;}
inline void setMachineRegister(RegisterID& rid) {rid = RegisterID(rid | machineRegisterMask);}
inline bool isColoredRegister(RegisterID rid) {return (rid & coloredRegisterMask) != 0;}
inline void setColoredRegister(RegisterID& rid) {rid = RegisterID(rid | coloredRegisterMask);}
#endif // DEBUG
#endif // _REGISTER_TYPES_H_

View File

@@ -0,0 +1,32 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "Fundamentals.h"
#include "SSATools.h"
#include "ControlGraph.h"
#include "VirtualRegister.h"
#include "Liveness.h"
void replacePhiNodes(ControlGraph& controlGraph, VirtualRegisterManager& vrManager)
{
if (!controlGraph.hasBackEdges)
return;
Liveness liveness(controlGraph.pool);
liveness.buildLivenessAnalysis(controlGraph, vrManager);
}

View File

@@ -0,0 +1,29 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _SSA_TOOLS_H_
#define _SSA_TOOLS_H_
#include "Fundamentals.h"
class ControlGraph;
class VirtualRegisterManager;
extern void replacePhiNodes(ControlGraph& controlGraph, VirtualRegisterManager& vrManager);
#endif // _SSA_TOOLS_H_

View File

@@ -0,0 +1,37 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "Fundamentals.h"
#include "SparseSet.h"
#include "BitSet.h"
#include "Pool.h"
#ifdef DEBUG_LOG
// Print the set.
//
void SparseSet::printPretty(LogModuleObject log)
{
Pool pool;
BitSet set(pool, universeSize);
for (Uint32 i = 0; i < count; i++)
set.set(node[i].element);
set.printPretty(log);
}
#endif // DEBUG_LOG

View File

@@ -0,0 +1,168 @@
// -*- mode:C++; tab-width:4; truncate-lines:t -*-
//
// CONFIDENTIAL AND PROPRIETARY SOURCE CODE OF
// NETSCAPE COMMUNICATIONS CORPORATION
// Copyright © 1996, 1997 Netscape Communications Corporation. All Rights
// Reserved. Use of this Source Code is subject to the terms of the
// applicable license agreement from Netscape Communications Corporation.
// The copyright notice(s) in this Source Code does not indicate actual or
// intended publication of this Source Code.
//
// $Id: SparseSet.h,v 1.1.2.1 1999-03-02 16:12:07 fur%netscape.com Exp $
//
#ifndef _SPARSE_SET_H_
#define _SPARSE_SET_H_
#include "Fundamentals.h"
#include "Pool.h"
#include "LogModule.h"
#include "BitSet.h"
class SparseSet
{
private:
struct Node {
Uint32 element;
Uint32 stackIndex;
};
Node* node;
Uint32 count;
Uint32 universeSize;
private:
// No copy constructor.
SparseSet(const SparseSet&);
// Check if the given set's universe is of the same size than this universe.
void checkUniverseCompatibility(const SparseSet& set) const {assert(set.universeSize == universeSize);}
// Check if pos is valid for this set's universe.
void checkMember(Int32 pos) const {assert(pos >=0 && Uint32(pos) < universeSize);}
public:
SparseSet(Pool& pool, Uint32 universeSize) : universeSize(universeSize) {node = new(pool) Node[universeSize]; clear();}
// Clear the sparse set.
void clear() {count = 0;}
// Clear the element at index.
inline void clear(Uint32 index);
// Set the element at index.
inline void set(Uint32 index);
// Return true if the element at index is set.
inline bool test(Uint32 index) const;
// Union with the given sparse set.
inline void or(const SparseSet& set);
// Intersection with the given sparse set.
inline void and(const SparseSet& set);
// Difference with the given sparse set.
inline void difference(const SparseSet& set);
// Copy set.
inline SparseSet& operator = (const SparseSet& set);
inline SparseSet& operator = (const BitSet& set);
// Return true if the sparse sets are identical.
friend bool operator == (const SparseSet& set1, const SparseSet& set2);
// Return true if the sparse sets are different.
friend bool operator != (const SparseSet& set1, const SparseSet& set2);
// Logical operators.
SparseSet& operator |= (const SparseSet& set) {or(set); return *this;}
SparseSet& operator &= (const SparseSet& set) {and(set); return *this;}
SparseSet& operator -= (const SparseSet& set) {difference(set); return *this;}
// Iterator to conform with the set API.
typedef Int32 iterator;
// Return the iterator for the first element of this set.
iterator begin() const {return count - 1;}
// Return the next iterator.
iterator advance(iterator pos) const {return --pos;}
// Return true if the iterator is at the end of the set.
bool done(iterator pos) const {return pos < 0;}
// Return the element for the given iterator;
Uint32 get(iterator pos) const {return node[pos].element;}
// Return one element of this set.
Uint32 getOne() const {assert(count > 0); return node[0].element;}
// Return the size of this set.
Uint32 getSize() const {return count;}
#ifdef DEBUG_LOG
// Print the set.
void printPretty(LogModuleObject log);
#endif // DEBUG_LOG
};
inline void SparseSet::clear(Uint32 element)
{
checkMember(element);
Uint32 count = this->count;
Node* node = this->node;
Uint32 stackIndex = node[element].stackIndex;
if ((stackIndex < count) && (node[stackIndex].element == element)) {
Uint32 stackTop = node[count - 1].element;
node[stackIndex].element = stackTop;
node[stackTop].stackIndex = stackIndex;
this->count = count - 1;
}
}
inline void SparseSet::set(Uint32 element)
{
checkMember(element);
Uint32 count = this->count;
Node* node = this->node;
Uint32 stackIndex = node[element].stackIndex;
if ((stackIndex >= count) || (node[stackIndex].element != element)) {
node[count].element = element;
node[element].stackIndex = count;
this->count = count + 1;
}
}
inline bool SparseSet::test(Uint32 element) const
{
checkMember(element);
Node* node = this->node;
Uint32 stackIndex = node[element].stackIndex;
return ((stackIndex < count) && (node[stackIndex].element == element));
}
inline SparseSet& SparseSet::operator = (const SparseSet& set)
{
checkUniverseCompatibility(set);
Uint32 sourceCount = set.getSize();
Node* node = this->node;
memcpy(node, set.node, sourceCount * sizeof(Node));
for (Uint32 i = 0; i < sourceCount; i++) {
Uint32 element = node[i].element;
node[element].stackIndex = i;
}
count = sourceCount;
return *this;
}
inline SparseSet& SparseSet::operator = (const BitSet& set)
{
// FIX: there's room for optimization here.
assert(universeSize == set.getSize());
clear();
for (Int32 i = set.firstOne(); i != -1; i = set.nextOne(i))
this->set(i);
return *this;
}
#endif // _SPARSE_SET_H_

View File

@@ -0,0 +1,270 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef NEW_LAURENTM_CODE
#define INCLUDE_EMITTER
#include "CpuInfo.h"
#include "Fundamentals.h"
#include "ControlNodes.h"
#include "Instruction.h"
#include "InstructionEmitter.h"
#include "Spilling.h"
void Spilling::
insertSpillCode(ControlNode** dfsList, Uint32 nNodes)
{
PRUint32 nVirtualRegisters = vRegManager.count();
FastBitSet currentLive(vRegManager.pool, nVirtualRegisters);
FastBitSet usedInThisInstruction(vRegManager.pool, nVirtualRegisters);
RegisterFifo grNeedLoad(nVirtualRegisters);
RegisterFifo fpNeedLoad(nVirtualRegisters);
for (PRInt32 n = nNodes - 1; n >= 0; n--)
{
PR_ASSERT(grNeedLoad.empty() & fpNeedLoad.empty());
ControlNode& node = *dfsList[n];
currentLive = node.liveAtEnd;
PRUint32 nGeneralAlive = 0;
PRUint32 nFloatingPointAlive = 0;
// Get the number of registers alive at the end of this node.
for (PRInt32 j = currentLive.firstOne(); j != -1; j = currentLive.nextOne(j))
{
VirtualRegister& vReg = vRegManager.getVirtualRegister(j);
if (vReg.spillInfo.willSpill)
{
currentLive.clear(j);
}
else
{
switch (vReg.getClass())
{
case vrcInteger:
nGeneralAlive++;
break;
case vrcFloatingPoint:
case vrcFixedPoint:
nFloatingPointAlive++;
break;
default:
break;
}
}
}
// if(node.dfsNum == 8) printf("\n________Begin Node %d________\n", node.dfsNum);
InstructionList& instructions = node.getInstructions();
for (InstructionList::iterator i = instructions.end(); !instructions.done(i); i = instructions.retreat(i))
{
Instruction& instruction = instructions.get(i);
InstructionUse* useBegin = instruction.getInstructionUseBegin();
InstructionUse* useEnd = instruction.getInstructionUseEnd();
InstructionUse* usePtr;
InstructionDefine* defBegin = instruction.getInstructionDefineBegin();
InstructionDefine* defEnd = instruction.getInstructionDefineEnd();
InstructionDefine* defPtr;
// if(node.dfsNum == 8) { printf("\n");
// instruction.printPretty(stdout);
// printf("\n"); }
// Handle definitions
for (defPtr = defBegin; defPtr < defEnd; defPtr++)
if (defPtr->isVirtualRegister())
{
VirtualRegister& vReg = defPtr->getVirtualRegister();
currentLive.clear(vReg.getRegisterIndex());
switch (vReg.getClass())
{
case vrcInteger:
nGeneralAlive--;
break;
case vrcFloatingPoint:
case vrcFixedPoint:
nFloatingPointAlive--;
break;
default:
break;
}
}
// Check for deaths
for (usePtr = useBegin; usePtr < useEnd; usePtr++)
if (usePtr->isVirtualRegister())
{
VirtualRegister& vReg = usePtr->getVirtualRegister();
if (!currentLive.test(vReg.getRegisterIndex()))
// This is the last use of this register.
{
currentLive.set(vReg.getRegisterIndex());
switch (vReg.getClass())
{
case vrcInteger:
nGeneralAlive++;
while (/*(nGeneralAlive > NUMBER_OF_GREGISTERS) &&*/ !grNeedLoad.empty())
{
PRUint32 toLoad = grNeedLoad.get();
currentLive.clear(toLoad);
nGeneralAlive--;
VirtualRegister& nReg = vRegManager.getVirtualRegister(toLoad);
Instruction& lastUsingInstruction = *nReg.spillInfo.lastUsingInstruction;
emitter.emitLoadAfter(*lastUsingInstruction.getPrimitive(), lastUsingInstruction.getLinks().prev,
nReg.getAlias(), *nReg.equivalentRegister[vrcStackSlot]);
nReg.releaseSelf();
}
break;
case vrcFloatingPoint:
case vrcFixedPoint:
nFloatingPointAlive++;
while (/*(nFloatingPointAlive > NUMBER_OF_FPREGISTERS) &&*/ !fpNeedLoad.empty())
{
PRUint32 toLoad = fpNeedLoad.get();
currentLive.clear(toLoad);
nFloatingPointAlive--;
VirtualRegister& nReg = vRegManager.getVirtualRegister(toLoad);
Instruction& lastUsingInstruction = *nReg.spillInfo.lastUsingInstruction;
emitter.emitLoadAfter(*lastUsingInstruction.getPrimitive(), lastUsingInstruction.getLinks().prev,
nReg.getAlias(), *nReg.equivalentRegister[vrcStackSlot]);
nReg.releaseSelf();
}
break;
default:
break;
}
}
}
// Handle uses
for (usePtr = useBegin; usePtr < useEnd; usePtr++)
if (usePtr->isVirtualRegister())
{
VirtualRegister& vReg = usePtr->getVirtualRegister();
PRUint32 registerIndex = vReg.getRegisterIndex();
if (vReg.spillInfo.willSpill) {
#if defined(GENERATE_FOR_X86)
if (!instruction.switchUseToSpill((usePtr - useBegin), *vReg.equivalentRegister[vrcStackSlot]))
#endif
{
switch (vReg.getClass())
{
case vrcInteger:
if (!grNeedLoad.test(registerIndex))
{
grNeedLoad.put(registerIndex);
VirtualRegister& alias = vRegManager.newVirtualRegister(vrcInteger);
if (vReg.isPreColored())
alias.preColorRegister(vReg.getPreColor());
/* if (vReg.hasSpecialInterference) {
alias.specialInterference.sizeTo(NUMBER_OF_REGISTERS);
alias.specialInterference = vReg.specialInterference;
alias.hasSpecialInterference = true;
} */
vReg.setAlias(alias);
vReg.retainSelf();
}
break;
case vrcFloatingPoint:
case vrcFixedPoint:
if (!fpNeedLoad.test(registerIndex))
{
fpNeedLoad.put(registerIndex);
VirtualRegister& alias = vRegManager.newVirtualRegister(vReg.getClass());
if (vReg.isPreColored())
alias.preColorRegister(vReg.getPreColor());
/*if (vReg.hasSpecialInterference) {
alias.specialInterference.sizeTo(NUMBER_OF_REGISTERS);
alias.specialInterference = vReg.specialInterference;
alias.hasSpecialInterference = true;
} */
vReg.setAlias(alias);
vReg.retainSelf();
}
break;
default:
break;
}
usePtr->getVirtualRegisterPtr().initialize(vReg.getAlias());
usedInThisInstruction.set(registerIndex);
vReg.spillInfo.lastUsingInstruction = &instruction;
}
currentLive.clear(registerIndex);
} else { // will not spill
currentLive.set(registerIndex);
}
}
// Handle definitions
for (defPtr = defBegin; defPtr < defEnd; defPtr++)
if (defPtr->isVirtualRegister())
{
VirtualRegister& vReg = defPtr->getVirtualRegister();
if (vReg.spillInfo.willSpill)
#if defined(GENERATE_FOR_X86)
if (!instruction.switchDefineToSpill((defPtr - defBegin), *vReg.equivalentRegister[vrcStackSlot]))
#endif
{
if (usedInThisInstruction.test(vReg.getRegisterIndex()))
// this virtualRegister was used in this instruction and is also defined. We need to move
// this virtual register to its alias first and then save it to memory.
{
emitter.emitStoreAfter(*instruction.getPrimitive(), &instruction.getLinks(),
vReg.getAlias(), *vReg.equivalentRegister[vrcStackSlot]);
defPtr->getVirtualRegisterPtr().initialize(vReg.getAlias());
}
else
{
emitter.emitStoreAfter(*instruction.getPrimitive(), &instruction.getLinks(),
vReg, *vReg.equivalentRegister[vrcStackSlot]);
}
}
}
}
while (!grNeedLoad.empty())
{
PRUint32 nl = grNeedLoad.get();
VirtualRegister& nlReg = vRegManager.getVirtualRegister(nl);
Instruction& lastUse = *nlReg.spillInfo.lastUsingInstruction;
emitter.emitLoadAfter(*lastUse.getPrimitive(), lastUse.getLinks().prev,
nlReg.getAlias(), *nlReg.equivalentRegister[vrcStackSlot]);
nlReg.releaseSelf();
}
while (!fpNeedLoad.empty())
{
PRUint32 nl = fpNeedLoad.get();
VirtualRegister& nlReg = vRegManager.getVirtualRegister(nl);
Instruction& lastUse = *nlReg.spillInfo.lastUsingInstruction;
emitter.emitLoadAfter(*lastUse.getPrimitive(), lastUse.getLinks().prev,
nlReg.getAlias(), *nlReg.equivalentRegister[vrcStackSlot]);
nlReg.releaseSelf();
}
// if(node.dfsNum == 8) printf("\n________End Node %d________\n", node.dfsNum);
}
}
#endif

View File

@@ -0,0 +1,269 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _SPILLING_H_
#define _SPILLING_H_
#include "Fundamentals.h"
#include <string.h>
#include "RegisterAllocator.h"
#include "RegisterAllocatorTools.h"
#include "ControlGraph.h"
#include "ControlNodes.h"
#include "Instruction.h"
#include "SparseSet.h"
template <class RegisterPressure>
class Spilling
{
private:
static void insertStoreAfter(Instruction& instruction, RegisterName name);
static void insertLoadBefore(Instruction& instruction, RegisterName name);
public:
static void calculateSpillCosts(RegisterAllocator& registerAllocator);
static void insertSpillCode(RegisterAllocator& registerAllocator);
};
struct SpillCost
{
double loads;
double stores;
double copies;
double cost;
bool infinite;
};
template <class RegisterPressure>
void Spilling<RegisterPressure>::insertSpillCode(RegisterAllocator& registerAllocator)
{
Uint32 rangeCount = registerAllocator.rangeCount;
RegisterName* name2range = registerAllocator.name2range;
Pool& pool = registerAllocator.pool;
SparseSet currentLive(pool, rangeCount);
SparseSet needLoad(pool, rangeCount);
SparseSet mustSpill(pool, rangeCount);
SparseSet& willSpill = *registerAllocator.willSpill;
ControlGraph& controlGraph = registerAllocator.controlGraph;
RegisterPressure::Set* liveOut = registerAllocator.liveness.liveOut;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
for (Uint32 n = 0; n < nNodes; n++) {
needLoad.clear();
currentLive = liveOut[n];
mustSpill = currentLive;
InstructionList& instructions = nodes[n]->getInstructions();
for (InstructionList::iterator i = instructions.end(); !instructions.done(i);) {
Instruction& instruction = instructions.get(i);
i = instructions.retreat(i);
InstructionUse* useBegin = instruction.getInstructionUseBegin();
InstructionUse* useEnd = instruction.getInstructionUseEnd();
InstructionUse* usePtr;
InstructionDefine* defineBegin = instruction.getInstructionDefineBegin();
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
InstructionDefine* definePtr;
bool foundLiveDefine = false;
for (definePtr = defineBegin; definePtr < defineEnd; definePtr++)
if (definePtr->isRegister()) {
if (currentLive.test(name2range[definePtr->getRegisterName()])) {
foundLiveDefine = true;
break;
}
} else {
foundLiveDefine = true;
break;
}
if (defineBegin != defineEnd && !foundLiveDefine) {
fprintf(stderr, "!!! Removed instruction because it was only defining unused registers !!!\n");
instruction.remove();
}
for (definePtr = defineBegin; definePtr < defineEnd; definePtr++)
if (definePtr->isRegister()) {
RegisterName range = name2range[definePtr->getRegisterName()];
#ifdef DEBUG
if (needLoad.test(range))
if (!mustSpill.test(range) && registerAllocator.spillCost[range].infinite && willSpill.test(range)) {
fprintf(stderr, "Tried to spill a register with infinite spill cost\n");
abort();
}
#endif // DEBUG
if (willSpill.test(range))
insertStoreAfter(instruction, range);
needLoad.clear(range);
}
if (instruction.getFlags() & ifCopy)
for (usePtr = useBegin; usePtr < useEnd; usePtr++)
if (usePtr->isRegister()) {
RegisterName range = name2range[usePtr->getRegisterName()];
if (!currentLive.test(range))
for (SparseSet::iterator r = needLoad.begin(); !needLoad.done(r); r = needLoad.advance(r)) {
RegisterName load = RegisterName(needLoad.get(r));
if (willSpill.test(load))
insertLoadBefore(instruction, load);
mustSpill.set(load);
}
needLoad.clear();
}
for (definePtr = defineBegin; definePtr < defineEnd; definePtr++)
if (definePtr->isRegister())
currentLive.clear(name2range[definePtr->getRegisterName()]);
for (usePtr = useBegin; usePtr < useEnd; usePtr++)
if (usePtr->isRegister()) {
RegisterName range = name2range[usePtr->getRegisterName()];
currentLive.set(range);
needLoad.set(range);
}
}
for (SparseSet::iterator l = needLoad.begin(); !needLoad.done(l); l = needLoad.advance(l)) {
RegisterName load = RegisterName(needLoad.get(l));
if (willSpill.test(load))
insertLoadBefore(instructions.first(), load);
}
}
}
template <class RegisterPressure>
void Spilling<RegisterPressure>::insertLoadBefore(Instruction& /*instruction*/, RegisterName name)
{
fprintf(stdout, "will insert load for range %d\n", name);
}
template <class RegisterPressure>
void Spilling<RegisterPressure>::insertStoreAfter(Instruction& /*instruction*/, RegisterName name)
{
fprintf(stdout, "will insert store for range %d\n", name);
}
template <class RegisterPressure>
void Spilling<RegisterPressure>::calculateSpillCosts(RegisterAllocator& registerAllocator)
{
Uint32 rangeCount = registerAllocator.rangeCount;
RegisterName* name2range = registerAllocator.name2range;
Pool& pool = registerAllocator.pool;
SparseSet live(pool, rangeCount);
SparseSet needLoad(pool, rangeCount);
SparseSet mustSpill(pool, rangeCount);
SparseSet alreadyStored(pool, rangeCount); // FIX: should get this from previous spilling.
SpillCost* cost = new SpillCost[rangeCount];
memset(cost, '\0', rangeCount * sizeof(SpillCost));
ControlGraph& controlGraph = registerAllocator.controlGraph;
RegisterPressure::Set* liveOut = registerAllocator.liveness.liveOut;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
for (Uint32 n = 0; n < nNodes; n++) {
ControlNode& node = *nodes[n];
double weight = doLog10(node.loopDepth);
needLoad.clear();
live = liveOut[n];
mustSpill = live;
InstructionList& instructions = nodes[n]->getInstructions();
for (InstructionList::iterator i = instructions.end(); !instructions.done(i); i = instructions.retreat(i)) {
Instruction& instruction = instructions.get(i);
InstructionUse* useBegin = instruction.getInstructionUseBegin();
InstructionUse* useEnd = instruction.getInstructionUseEnd();
InstructionUse* usePtr;
InstructionDefine* defineBegin = instruction.getInstructionDefineBegin();
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
InstructionDefine* definePtr;
for (definePtr = defineBegin; definePtr < defineEnd; definePtr++)
if (definePtr->isRegister()) {
RegisterName range = name2range[definePtr->getRegisterName()];
if (needLoad.test(range))
if (!mustSpill.test(range))
cost[range].infinite = true;
if ((false /* !rematerializable(range) */ || !needLoad.test(range)) && !alreadyStored.test(range))
cost[range].stores += weight;
needLoad.clear(range);
}
if (instruction.getFlags() & ifCopy)
for (usePtr = useBegin; usePtr < useEnd; usePtr++)
if (usePtr->isRegister())
if (!live.test(name2range[usePtr->getRegisterName()])) {
for (SparseSet::iterator l = needLoad.begin(); !needLoad.done(l); l = needLoad.advance(l)) {
Uint32 range = needLoad.get(l);
cost[range].loads += weight;
mustSpill.set(range);
}
needLoad.clear();
}
for (definePtr = defineBegin; definePtr < defineEnd; definePtr++)
if (definePtr->isRegister())
live.clear(name2range[definePtr->getRegisterName()]);
for (usePtr = useBegin; usePtr < useEnd; usePtr++)
if (usePtr->isRegister()) {
RegisterName range = name2range[usePtr->getRegisterName()];
live.set(range);
needLoad.set(range);
}
if (instruction.getFlags() & ifCopy) {
assert(useBegin != useEnd && useBegin[0].isRegister());
assert(defineBegin != defineEnd && defineBegin[0].isRegister());
RegisterName source = name2range[useBegin[0].getRegisterName()];
RegisterName destination = name2range[defineBegin[0].getRegisterName()];
cost[source].copies += weight;
cost[destination].copies += weight;
}
}
for (SparseSet::iterator s = needLoad.begin(); !needLoad.done(s); s = needLoad.advance(s))
cost[needLoad.get(s)].loads += weight;
}
for (Uint32 r = 0; r < rangeCount; r++) {
SpillCost& c = cost[r];
c.cost = 2 * (c.loads + c.stores) - c.copies;
}
registerAllocator.spillCost = cost;
}
#endif // _SPILLING_H_

View File

@@ -0,0 +1,239 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _SPLITS_H_
#define _SPLITS_H_
#include "Fundamentals.h"
#include <string.h>
#include "Pool.h"
#include "ControlGraph.h"
#include "ControlNodes.h"
#include "Instruction.h"
#include "RegisterAllocator.h"
#include "RegisterAllocatorTools.h"
UT_EXTERN_LOG_MODULE(RegAlloc);
template <class RegisterPressure>
struct Splits
{
static void calculateSplitCosts(RegisterAllocator& registerAllocator);
static bool findSplit(RegisterAllocator& registerAllocator, RegisterName* color, RegisterName range);
static void insertSplitCode(RegisterAllocator& registerAllocator);
};
struct SplitCost
{
double loads;
double stores;
};
template <class RegisterPressure>
void Splits<RegisterPressure>::insertSplitCode(RegisterAllocator& /*registerAllocator*/)
{
// FIX
}
template <class RegisterPressure>
bool Splits<RegisterPressure>::findSplit(RegisterAllocator& registerAllocator, RegisterName* color, RegisterName range)
{
Pool& pool = registerAllocator.pool;
NameLinkedList** neighborsWithColor = new(pool) NameLinkedList*[6]; // FIX
memset(neighborsWithColor, '\0', 6 * sizeof(NameLinkedList*));
InterferenceGraph<RegisterPressure>& iGraph = registerAllocator.iGraph;
for (InterferenceVector* vector = iGraph.getInterferenceVector(range); vector != NULL; vector = vector->next)
for (Int32 i = vector->count - 1; i >=0; --i) {
RegisterName neighbor = vector->neighbors[i];
RegisterName c = color[neighbor];
if (c < 6) { // FIX
NameLinkedList* node = new(pool) NameLinkedList();
node->name = neighbor;
node->next = neighborsWithColor[c];
neighborsWithColor[c] = node;
}
}
bool splitAroundName = true;
LiveRangeGraph<RegisterPressure>& lGraph = registerAllocator.lGraph;
RegisterName bestColor = RegisterName(6); // FIX
double bestCost = registerAllocator.spillCost[range].cost;
SplitCost* splitCost = registerAllocator.splitCost;
for (RegisterName i = RegisterName(0); i < 6; i = RegisterName(i + 1)) { // FIX
double splitAroundNameCost = 0.0;
bool canSplitAroundName = true;
SplitCost& sCost = splitCost[range];
double addedCost = 2.0 * (sCost.stores + sCost.loads);
for (NameLinkedList* node = neighborsWithColor[i]; node != NULL; node = node->next) {
RegisterName neighbor = node->name;
if (lGraph.haveEdge(neighbor, range)) {
canSplitAroundName = false;
break;
} else
splitAroundNameCost += addedCost;
}
if (canSplitAroundName && splitAroundNameCost < bestCost) {
bestCost = splitAroundNameCost;
bestColor = i;
splitAroundName = true;
}
double splitAroundColorCost = 0.0;
bool canSplitAroundColor = true;
for (NameLinkedList* node = neighborsWithColor[i]; node != NULL; node = node->next) {
RegisterName neighbor = node->name;
if (lGraph.haveEdge(range, neighbor)) {
canSplitAroundColor = false;
break;
} else {
SplitCost& sCost = splitCost[neighbor];
double addedCost = 2.0 * (sCost.stores + sCost.loads);
splitAroundColorCost += addedCost;
}
}
if (canSplitAroundColor && splitAroundColorCost < bestCost) {
bestCost = splitAroundColorCost;
bestColor = i;
splitAroundName = false;
}
}
if (bestColor < RegisterName(6)) {
color[range] = bestColor;
registerAllocator.splitFound = true;
NameLinkedList** splitAround = registerAllocator.splitAround;
if (splitAroundName)
for (NameLinkedList* node = neighborsWithColor[bestColor]; node != NULL; node = node->next) {
NameLinkedList* newNode = new(pool) NameLinkedList();
newNode->name = node->name;
newNode->next = splitAround[range];
splitAround[range] = newNode;
}
else
for (NameLinkedList* node = neighborsWithColor[bestColor]; node != NULL; node = node->next) {
NameLinkedList* newNode = new(pool) NameLinkedList();
RegisterName neighbor = node->name;
newNode->name = range;
newNode->next = splitAround[neighbor];
splitAround[neighbor] = newNode;
}
trespass("Found a split");
return true;
}
return false;
}
template <class RegisterPressure>
void Splits<RegisterPressure>::calculateSplitCosts(RegisterAllocator& registerAllocator)
{
Pool& pool = registerAllocator.pool;
Uint32 rangeCount = registerAllocator.rangeCount;
RegisterName* name2range = registerAllocator.name2range;
SplitCost* splitCost = new(pool) SplitCost[rangeCount];
memset(splitCost, '\0', rangeCount * sizeof(SplitCost));
SparseSet live(pool, rangeCount);
RegisterPressure::Set* liveIn = registerAllocator.liveness.liveIn;
RegisterPressure::Set* liveOut = registerAllocator.liveness.liveOut;
ControlGraph& controlGraph = registerAllocator.controlGraph;
ControlNode** nodes = controlGraph.dfsList;
Uint32 nNodes = controlGraph.nNodes;
for (Uint32 n = 0; n < nNodes; n++) {
ControlNode& node = *nodes[n];
double weight = doLog10(node.loopDepth);
live = liveOut[n];
ControlEdge* successorsEnd = node.getSuccessorsEnd();
for (ControlEdge* successorsPtr = node.getSuccessorsBegin(); successorsPtr < successorsEnd; successorsPtr++) {
ControlNode& successor = successorsPtr->getTarget();
if (successor.getControlKind() != ckEnd) {
RegisterPressure::Set& successorLiveIn = liveIn[successor.dfsNum];
for (SparseSet::iterator i = live.begin(); !live.done(i); i = live.advance(i)) {
RegisterName name = RegisterName(live.get(i));
if (!successorLiveIn.test(name))
splitCost[name].loads += doLog10(successor.loopDepth);
}
}
}
InstructionList& instructions = node.getInstructions();
for (InstructionList::iterator i = instructions.end(); !instructions.done(i); i = instructions.retreat(i)) {
Instruction& instruction = instructions.get(i);
InstructionUse* useBegin = instruction.getInstructionUseBegin();
InstructionUse* useEnd = instruction.getInstructionUseEnd();
InstructionUse* usePtr;
InstructionDefine* defineBegin = instruction.getInstructionDefineBegin();
InstructionDefine* defineEnd = instruction.getInstructionDefineEnd();
InstructionDefine* definePtr;
for (definePtr = defineBegin; definePtr < defineEnd; definePtr++)
if (definePtr->isRegister())
splitCost[name2range[definePtr->getRegisterName()]].stores += weight;
for (usePtr = useBegin; usePtr < useEnd; usePtr++)
if (usePtr->isRegister()) {
RegisterName range = name2range[usePtr->getRegisterName()];
if (!live.test(range)) {
if (&instruction != &instructions.last())
splitCost[range].loads += weight;
else {
ControlEdge* successorsEnd = node.getSuccessorsEnd();
for (ControlEdge* successorsPtr = node.getSuccessorsBegin(); successorsPtr < successorsEnd; successorsPtr++)
splitCost[range].loads += doLog10(successorsPtr->getTarget().loopDepth);
}
}
}
for (definePtr = defineBegin; definePtr < defineEnd; definePtr++)
if (definePtr->isRegister())
live.clear(name2range[definePtr->getRegisterName()]);
for (usePtr = useBegin; usePtr < useEnd; usePtr++)
if (usePtr->isRegister())
live.set(name2range[usePtr->getRegisterName()]);
}
}
NameLinkedList** splitAround = new(pool) NameLinkedList*[rangeCount];
memset(splitAround, '\0', rangeCount * sizeof(NameLinkedList*));
registerAllocator.splitAround = splitAround;
registerAllocator.splitCost = splitCost;
registerAllocator.splitFound = false;
}
#endif // _SPLITS_H_

View File

@@ -0,0 +1,186 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "Fundamentals.h"
#include "HashTable.h"
#include "Timer.h"
#include "Pool.h"
static Pool pool; // Pool for the Timer class.
static HashTable<TimerEntry*> timerEntries(pool); // Timers hashtable.
const nTimersInABlock = 128; // Number of timers in a block.
static PRTime *timers = new(pool) PRTime[nTimersInABlock]; // A block of timers.
static Uint8 nextTimer = 0; // nextAvailableTimer.
//
// Calibrate the call to PR_Now().
//
static PRTime calibrate()
{
PRTime t = PR_Now();
PRTime& a = *new(pool) PRTime();
// Call 10 times the PR_Now() function.
a = PR_Now(); a = PR_Now(); a = PR_Now(); a = PR_Now(); a = PR_Now(); a = PR_Now();
a = PR_Now(); a = PR_Now(); a = PR_Now(); a = PR_Now(); a = PR_Now(); a = PR_Now();
t = (PR_Now() - t + 9) / 10;
return t;
}
static PRTime adjust = calibrate();
//
// Return the named timer..
//
TimerEntry& Timer::getTimerEntry(const char* name)
{
if (!timerEntries.exists(name)) {
TimerEntry* newEntry = new(pool) TimerEntry();
newEntry->accumulator = 0;
newEntry->running = false;
timerEntries.add(name, newEntry);
}
return *timerEntries[name];
}
//
// Return a reference to a new timer.
//
PRTime& Timer::getNewTimer()
{
if (nextTimer >= nTimersInABlock) {
timers = new(pool) PRTime[nTimersInABlock];
nextTimer = 0;
}
return timers[nextTimer++];
}
static Uint32 timersAreFrozen = 0;
//
// Start the named timer.
//
void Timer::start(const char* name)
{
if (timersAreFrozen)
return;
freezeTimers();
TimerEntry& timer = getTimerEntry(name);
PR_ASSERT(!timer.running);
timer.accumulator = 0;
timer.running = true;
timer.done = false;
unfreezeTimers();
}
//
// Stop the named timer.
//
void Timer::stop(const char* name)
{
if (timersAreFrozen)
return;
freezeTimers();
TimerEntry& timer = getTimerEntry(name);
PR_ASSERT(timer.running);
timer.running = false;
timer.done = true;
unfreezeTimers();
}
//
// Freeze all the running timers.
//
void Timer::freezeTimers()
{
PRTime when = PR_Now() - adjust;
if (timersAreFrozen == 0) {
Vector<TimerEntry*> entries = timerEntries;
Uint32 count = entries.size();
for (Uint32 i = 0; i < count; i++) {
TimerEntry& entry = *entries[i];
if (entry.running) {
entry.accumulator += (when - *entry.startTime);
}
}
}
timersAreFrozen++;
}
//
// Unfreeze all the running timers.
//
void Timer::unfreezeTimers()
{
PR_ASSERT(timersAreFrozen != 0);
timersAreFrozen--;
if (timersAreFrozen == 0) {
Vector<TimerEntry *> entries = timerEntries;
Uint32 count = entries.size();
PRTime& newStart = getNewTimer();
for (Uint32 i = 0; i < count; i++) {
TimerEntry& entry = *entries[i];
if (entry.running) {
entry.startTime = &newStart;
}
}
newStart = PR_Now();
}
}
//
// Print the named timer in the file f.
//
void Timer::print(FILE* f, const char *name)
{
if (timersAreFrozen)
return;
freezeTimers();
TimerEntry& timer = getTimerEntry(name);
PR_ASSERT(timer.done);
PRTime elapsed = timer.accumulator;
if (elapsed >> 32) {
fprintf(f, "[timer %s out of range]\n", name);
} else {
fprintf(f, "[%dus in %s]\n", Uint32(elapsed), name);
}
fflush(f);
unfreezeTimers();
}

View File

@@ -0,0 +1,80 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _TIMER_H_
#define _TIMER_H_
#include "Fundamentals.h"
#include "HashTable.h"
#include "prtime.h"
//
// Naming convention:
// As the class Timer contains only static methods, the timer's name should start with the
// module name. Otherwise starting 2 timers with the same name will assert.
//
#ifndef NO_TIMER
struct TimerEntry
{
PRTime *startTime; // Current time when we start the timer.
PRTime accumulator; // Time spent in this timer.
bool running; // True if the timer is running.
bool done; // True if the timer was running and was stopped.
};
class Timer
{
private:
// Return the named timer.
static TimerEntry& getTimerEntry(const char* name);
// Return a reference to a new Timer.
static PRTime& getNewTimer();
public:
// Start the timer.
static void start(const char* name);
// Stop the timer.
static void stop(const char* name);
// Freeze all the running timers.
static void freezeTimers();
// Unfreeze all the running timers.
static void unfreezeTimers();
// Print the timer.
static void print(FILE* f, const char *name);
};
inline void startTimer(const char* name) {Timer::start(name);}
inline void stopTimer(const char* name) {Timer::stop(name); Timer::print(stdout, name);}
#define START_TIMER_SAFE Timer::freezeTimers();
#define END_TIMER_SAFE Timer::unfreezeTimers();
#define TIMER_SAFE(x) START_TIMER_SAFE x; END_TIMER_SAFE
#else /* NO_TIMER */
inline void startTimer(const char* /*name*/) {}
inline void stopTimer(const char* /*name*/) {}
#define START_TIMER_SAFE
#define END_TIMER_SAFE
#define TIMER_SAFE(x) x;
#endif /* NO_TIMER */
#endif /* _TIMER_H_ */

View File

@@ -0,0 +1,40 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "Fundamentals.h"
#include "VirtualRegister.h"
#include "Instruction.h"
//------------------------------------------------------------------------------
// VirtualRegister -
#ifdef MANUAL_TEMPLATES
template class IndexedPool<VirtualRegister>;
#endif
// Set the defining instruction.
//
void VirtualRegister::setDefiningInstruction(Instruction& instruction)
{
if (definingInstruction != NULL) {
if ((instruction.getFlags() & ifCopy) && (definingInstruction->getFlags() & ifPhiNode))
return;
}
definingInstruction = &instruction;
}

View File

@@ -0,0 +1,116 @@
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#ifndef _VIRTUAL_REGISTER_H_
#define _VIRTUAL_REGISTER_H_
#include "Fundamentals.h"
#include "IndexedPool.h"
#include <string.h>
#include "RegisterTypes.h"
#include "RegisterClass.h"
//------------------------------------------------------------------------------
// VirtualRegister - 24b
class Instruction;
class VirtualRegister : public IndexedObject<VirtualRegister>
{
public:
Instruction* definingInstruction; // Instruction defining this VR.
// Initialize a VR of the given classKind.
VirtualRegister(RegisterClassKind /*classKind*/) : definingInstruction(NULL) {}
// Return the defining instruction for this VR.
Instruction* getDefiningInstruction() const {return definingInstruction;}
// Set the defining instruction.
void setDefiningInstruction(Instruction& insn);
};
// Return true if the VirtualRegisters are equals. The only way 2 VRs can be equal is if
// they have the same index. If they have the same index then they are at the same
// address in the indexed pool.
//
inline bool operator == (const VirtualRegister& regA, const VirtualRegister& regB) {return &regA == &regB;}
//------------------------------------------------------------------------------
// VirtualRegisterManager -
struct PreColoredRegister
{
RegisterID id;
RegisterName color;
};
class VirtualRegisterManager
{
private:
IndexedPool<VirtualRegister> registerPool;
PreColoredRegister machineRegister[6];
public:
VirtualRegisterManager()
{
for (Uint32 i = 0; i < 6; i++)
machineRegister[i].id = invalidID;
}
// Return the VirtualRegister at the given index.
VirtualRegister& getVirtualRegister(RegisterName name) const {return registerPool.get(name);}
// Return a new VirtualRegister.
RegisterID newVirtualRegister(RegisterClassKind classKind)
{
VirtualRegister& vReg = *new(registerPool) VirtualRegister(classKind);
RegisterID rid;
setName(rid, RegisterName(vReg.getIndex()));
setClass(rid, classKind);
return rid;
}
RegisterID newMachineRegister(RegisterName name, RegisterClassKind classKind)
{
RegisterID rid = machineRegister[name].id;
if (rid == invalidID) {
rid = newVirtualRegister(classKind);
DEBUG_ONLY(setMachineRegister(rid));
machineRegister[name].id = rid;
machineRegister[name].color = name;
}
return rid;
}
PreColoredRegister* getMachineRegistersBegin() const {return (PreColoredRegister*) machineRegister;} // FIX
PreColoredRegister* getMachineRegistersEnd() const {return (PreColoredRegister*) &machineRegister[6];} // FIX
// Return the VirtualRegister universe size.
Uint32 getSize() {return registerPool.getSize();}
void setSize(Uint32 size) {registerPool.setSize(size);}
};
#endif // _VIRTUAL_REGISTER_H_

View File

@@ -1,248 +0,0 @@
#
### hostname: bl-bldlnx03.office.mozilla.org
### uname: Linux bl-bldlnx03.office.mozilla.org 2.6.18-1.2798.fc6 #1 SMP Mon Oct 16 14:54:20 EDT 2006 i686 i686 i386 GNU/Linux
##
#
#- tinder-config.pl - Tinderbox configuration file.
#- Uncomment the variables you need to set.
#- The default values are the same as the commented variables.
# $ENV{XPCOM_CC_DO_NOTHING}
#-----------------------------------------------------------------------------
# Default: 0
# Values: 0 | 1
# Purpose: Turn graydon's cycle collector on/off
#$ENV{XPCOM_CC_DO_NOTHING} = 0;
# $ENV{MOZ_PACKAGE_MSI}
#-----------------------------------------------------------------------------
# Default: 0
# Values: 0 | 1
# Purpose: Controls whether a MSI package is made.
# Requires: Windows and a local MakeMSI installation.
#$ENV{MOZ_PACKAGE_MSI} = 0;
# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
#-----------------------------------------------------------------------------
# Default: scp
# Values: scp | rsync
# Purpose: Use scp or rsync to transfer symbols to the Talkback server.
# Requires: The selected type requires the command be available both locally
# and on the Talkback server.
#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
#- You'll need to change these to suit your machine's needs
#$DisplayServer = ':0.0';
#- Default values of command-line opts
#-
#$BuildDepend = 1; # Depend or Clobber
#$BuildDebug = 0; # Debug or Opt (Darwin)
#$ReportStatus = 1; # Send results to server, or not
#$ReportFinalStatus = 1; # Finer control over $ReportStatus.
#$UseTimeStamp = 1; # Use the CVS 'pull-by-timestamp' option, or not
#$BuildOnce = 0; # Build once, don't send results to server
$TestOnly = 1; # Only run tests, don't pull/build
#$BuildEmbed = 0; # After building seamonkey, go build embed app.
#$SkipMozilla = 0; # Use to debug post-mozilla.pl scripts.
#$SkipCheckout = 0; # Use to debug build process without checking out new source.
#$BuildLocales = 0; # Do l10n packaging?
# Tests
$CleanProfile = 1;
#$ResetHomeDirForTests = 1;
#$ProductName = "Mozilla";
$VendorName = 'mozilla';
#$RunMozillaTests = 1; # Allow turning off of all tests if needed.
$RegxpcomTest = 1;
$AliveTest = 1;
#$JavaTest = 0;
#$ViewerTest = 0;
#$BloatTest = 0; # warren memory bloat test
#$BloatTest2 = 0; # dbaron memory bloat test, require tracemalloc
#$DomToTextConversionTest = 0;
#$XpcomGlueTest = 0;
$CodesizeTest = 0; # Z, require mozilla/tools/codesighs
$EmbedCodesizeTest = 0; # mZ, require mozilla/tools/codesigns
#$MailBloatTest = 0;
#$EmbedTest = 0; # Assumes you wanted $BuildEmbed=1
$LayoutPerformanceTest = 1; # Tp
$LayoutPerformanceLocalTest = 1; # Tp
$DHTMLPerformanceTest = 1; # Tdhtml
#$QATest = 0;
$XULWindowOpenTest = 1; # Txul
$StartupPerformanceTest = 1; # Ts
$TestsPhoneHome = 1; # Should test report back to server?
$TestOnlyTinderbox = 1;
$DownloadBuildFile = 'firefox-3.0a7pre.en-US.linux-i686.tar.bz2';
$DownloadBuildURL = 'http://stage.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds/fx-linux-tbox-trunk';
$DownloadBuildDir = 'firefox';
# If TestOnlyTinderbox is enabled, fetch the latest build info from tinderbox in a
# parseable format
$TinderboxServerURL = 'http://tinderbox.mozilla.org/showbuilds.cgi?tree=Firefox&quickparse=1';
$MatchBuildname = 'Linux fx-linux-tbox Depend Nightly';
$GraphNameOverride = "bl-bldlnx03_fx-linux-tbox-HEAD"; # Override name built from ::hostname() and $BuildTag
# $results_server
#----------------------------------------------------------------------------
# Server on which test results will be accessible. This was originally tegu,
# then became axolotl. Once we moved services from axolotl, it was time
# to give this service its own hostname to make future transitions easier.
# - cmp@mozilla.org
#$results_server = "build-graphs.mozilla.org";
$pageload_server = "spider.office.mozilla.org";
#
# Timeouts, values are in seconds.
#
#$CVSCheckoutTimeout = 3600;
#$CreateProfileTimeout = 45;
#$RegxpcomTestTimeout = 120;
$AliveTestTimeout = 5;
#$ViewerTestTimeout = 45;
#$EmbedTestTimeout = 45;
#$BloatTestTimeout = 120; # seconds
#$MailBloatTestTimeout = 120; # seconds
#$JavaTestTimeout = 45;
#$DomTestTimeout = 45; # seconds
#$XpcomGlueTestTimeout = 15;
#$CodesizeTestTimeout = 900; # seconds
#$CodesizeTestType = "auto"; # {"auto"|"base"}
#$LayoutPerformanceTestTimeout = 1200; # entire test, seconds
#$LayoutPerformanceLocalTestTimeout = 1200; # entire test, seconds
#$DHTMLPerformanceTestTimeout = 1200; # entire test, seconds
#$QATestTimeout = 1200; # entire test, seconds
#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
#$StartupPerformanceTestTimeout = 15; # seconds
#$XULWindowOpenTestTimeout = 150; # seconds
#$MozConfigFileName = 'mozconfig';
#$UseMozillaProfile = 1;
#$MozProfileName = 'default';
#- Set these to what makes sense for your system
#$Make = 'gmake'; # Must be GNU make
#$MakeOverrides = '';
#$mail = '/bin/mail';
#$CVS = 'cvs -q';
#$CVSCO = 'checkout -P';
# win32 usually doesn't have /bin/mail
#$blat = 'c:/nstools/bin/blat';
#$use_blat = 0;
# Set moz_cvsroot to something like:
# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
#
# Note that win32 may not need \@, depends on ' or ".
# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
#$moz_cvsroot = $ENV{CVSROOT};
#- Set these proper values for your tinderbox server
#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
# Allow for non-client builds, e.g. camino.
#$moz_client_mk = 'client.mk';
#- Set if you want to build in a separate object tree
#$ObjDir = '';
# Extra build name, if needed.
$BuildNameExtra = "fx-linux-tbox perf test";
# User comment, eg. ip address for dhcp builds.
# ex: $UserComment = "ip = 208.12.36.108";
#$UserComment = 0;
#-
#- The rest should not need to be changed
#-
#- Minimum wait period from start of build to start of next build in minutes.
$BuildSleep = 1;
#- Until you get the script working. When it works,
#- change to the tree you're actually building
$BuildTree = 'MozillaExperimental';
$BuildTag = 'HEAD';
#$BuildConfigDir = 'mozilla/config';
#$Topsrcdir = 'mozilla';
$BinaryName = 'firefox-bin';
#
# For embedding app, use:
#$EmbedBinaryName = 'TestGtkEmbed';
#$EmbedDistDir = 'dist/bin'
#$ShellOverride = ''; # Only used if the default shell is too stupid
#$ConfigureArgs = '';
#$ConfigureEnvArgs = '';
#$Compiler = 'gcc';
#$NSPRArgs = '';
#$ShellOverride = '';
# Release build options
#$ReleaseBuild = 1;
#$clean_objdir = 1; # remove objdir when starting release cycle?
#$clean_srcdir = 1; # remove srcdir when starting release cycle?
#$shiptalkback = 1;
#$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
#$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
#$ReleaseGroup = ''; # group to set uploaded files to
#$build_hour = "8";
#$package_creation_path = "/xpinstall/packager";
# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
#$ssh_version = "2";
#$ssh_user = "cltbld";
#$ssh_server = "stage.mozilla.org";
#$ftp_path = "/home/ftp/pub/mozilla/nightly/experimental";
#$url_path = "http://ftp.mozilla.org/pub/mozilla.org/mozilla/nightly/experimental";
#$tbox_ftp_path = $ftp_path;
#$tbox_url_path = $url_path;
#$milestone = "trunk";
#$notify_list = "cmp\@mozilla.org";
#$stub_installer = 1;
#$sea_installer = 1;
#$archive = 0;
#$push_raw_xpis = 1;
# Reboot the OS at the end of build-and-test cycle. This is primarily
# intended for Win9x, which can't last more than a few cycles before
# locking up (and testing would be suspect even after a couple of cycles).
# Right now, there is only code to force the reboot for Win9x, so even
# setting this to 1, will not have an effect on other platforms. Setting
# up win9x to automatically logon and begin running tinderbox is left
# as an exercise to the reader.
#$RebootSystem = 0;
# LogCompression specifies the type of compression used on the log file.
# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
# for 'gzip' or 'bzip2' are in the user's path before setting this
# option.
#$LogCompression = '';
# LogEncoding specifies the encoding format used for the logs. Valid
# options are 'base64', and 'uuencode'. If $LogCompression is set above,
# this needs to be set to 'base64' or 'uuencode' to ensure that the
# binary data is transferred properly.
#$LogEncoding = '';
# Prevent Extension Manager from spawning child processes during tests
# - processes that tbox scripts cannot kill.
#$ENV{NO_EM_RESTART} = '1';

View File

@@ -1,250 +0,0 @@
#
#### hostname: bl-bldxp01.office.mozilla.org
#### uname: CYGWIN_NT-5.1 bl-bldxp01 1.5.19(0.150/4/2) 2006-01-20 13:28 i686 Cygwin
###
#
#- tinder-config.pl - Tinderbox configuration file.
#- Uncomment the variables you need to set.
#- The default values are the same as the commented variables.
# $ENV{XPCOM_CC_DO_NOTHING}
#-----------------------------------------------------------------------------
# Default: 0
# Values: 0 | 1
# Purpose: Turn graydon's cycle collector on/off
#$ENV{XPCOM_CC_DO_NOTHING} = 0;
# $ENV{MOZ_PACKAGE_MSI}
#-----------------------------------------------------------------------------
# Default: 0
# Values: 0 | 1
# Purpose: Controls whether a MSI package is made.
# Requires: Windows and a local MakeMSI installation.
#$ENV{MOZ_PACKAGE_MSI} = 0;
# $ENV{MOZ_SYMBOLS_TRANSFER_TYPE}
#-----------------------------------------------------------------------------
# Default: scp
# Values: scp | rsync
# Purpose: Use scp or rsync to transfer symbols to the Talkback server.
# Requires: The selected type requires the command be available both locally
# and on the Talkback server.
#$ENV{MOZ_SYMBOLS_TRANSFER_TYPE} = "scp";
#- PLEASE FILL THIS IN WITH YOUR PROPER EMAIL ADDRESS
#$BuildAdministrator = "$ENV{USER}\@$ENV{HOST}";
#$BuildAdministrator = ($ENV{USER} || "cltbld") . "\@" . ($ENV{HOST} || "dhcp");
#- You'll need to change these to suit your machine's needs
#$DisplayServer = ':0.0';
#- Default values of command-line opts
#-
#$BuildDepend = 1; # Depend or Clobber
#$BuildDebug = 0; # Debug or Opt (Darwin)
#$ReportStatus = 1; # Send results to server, or not
#$ReportFinalStatus = 1; # Finer control over $ReportStatus.
#$UseTimeStamp = 1; # Use the CVS 'pull-by-timestamp' option, or not
#$BuildOnce = 0; # Build once, don't send results to server
$TestOnly = 1; # Only run tests, don't pull/build
#$BuildEmbed = 0; # After building seamonkey, go build embed app.
#$SkipMozilla = 0; # Use to debug post-mozilla.pl scripts.
#$SkipCheckout = 0; # Use to debug build process without checking out new source.
#$BuildLocales = 0; # Do l10n packaging?
# Tests
$CleanProfile = 1;
#$ResetHomeDirForTests = 1;
#$ProductName = "Mozilla";
$VendorName = 'mozilla';
#$RunMozillaTests = 1; # Allow turning off of all tests if needed.
$RegxpcomTest = 0;
$AliveTest = 1;
#$JavaTest = 0;
#$ViewerTest = 0;
#$BloatTest = 0; # warren memory bloat test
#$BloatTest2 = 0; # dbaron memory bloat test, require tracemalloc
#$DomToTextConversionTest = 0;
#$XpcomGlueTest = 0;
$CodesizeTest = 0; # Z, require mozilla/tools/codesighs
$EmbedCodesizeTest = 0; # mZ, require mozilla/tools/codesigns
#$MailBloatTest = 0;
#$EmbedTest = 0; # Assumes you wanted $BuildEmbed=1
$LayoutPerformanceTest = 1; # Tp
$LayoutPerformanceLocalTest = 1; # Tp2
$DHTMLPerformanceTest = 1; # Tdhtml
#$QATest = 0;
$XULWindowOpenTest = 1; # Txul
$StartupPerformanceTest = 1; # Ts
$TestsPhoneHome = 1; # Should test report back to server?
# If TestOnlyTinderbox is enabled, fetch the latest build info from tinderbox in a
# parseable format
$TinderboxServerURL = 'http://tinderbox.mozilla.org/showbuilds.cgi?tree=MozillaExperimental&quickparse=1';
$MatchBuildname = 'WINNT 5.2 fxnewref-win32- Depend Fx-Newref';
#$GraphNameOverride = 'Fx-Trunk-win32-test1'; # Override name built from ::hostname() and $BuildTag
# $results_server
#----------------------------------------------------------------------------
# Server on which test results will be accessible. This was originally tegu,
# then became axolotl. Once we moved services from axolotl, it was time
# to give this service its own hostname to make future transitions easier.
# - cmp@mozilla.org
#$results_server = "build-graphs.mozilla.org";
$pageload_server = "spider.office.mozilla.org";
#
# Timeouts, values are in seconds.
#
#$CVSCheckoutTimeout = 3600;
#$CreateProfileTimeout = 45;
#$RegxpcomTestTimeout = 120;
$AliveTestTimeout = 45;
#$ViewerTestTimeout = 45;
#$EmbedTestTimeout = 45;
#$BloatTestTimeout = 120; # seconds
#$MailBloatTestTimeout = 120; # seconds
#$JavaTestTimeout = 45;
#$DomTestTimeout = 45; # seconds
#$XpcomGlueTestTimeout = 15;
#$CodesizeTestTimeout = 900; # seconds
#$CodesizeTestType = "auto"; # {"auto"|"base"}
#$LayoutPerformanceTestTimeout = 1200; # entire test, seconds
#$LayoutPerformanceLocalTestTimeout = 1200; # entire test, seconds
#$DHTMLPerformanceTestTimeout = 1200; # entire test, seconds
#$QATestTimeout = 1200; # entire test, seconds
#$LayoutPerformanceTestPageTimeout = 30000; # each page, ms
#$StartupPerformanceTestTimeout = 15; # seconds
#$XULWindowOpenTestTimeout = 150; # seconds
#$MozConfigFileName = 'mozconfig';
#$UseMozillaProfile = 1;
#$MozProfileName = 'default';
#- Set these to what makes sense for your system
#$Make = 'gmake'; # Must be GNU make
#$MakeOverrides = '';
#$mail = '/bin/mail';
#$CVS = 'cvs -q';
#$CVSCO = 'checkout -P';
# win32 usually doesn't have /bin/mail
#$blat = 'c:/nstools/bin/blat';
#$use_blat = 0;
# Set moz_cvsroot to something like:
# :pserver:$ENV{USER}%netscape.com\@cvs.mozilla.org:/cvsroot
# :pserver:anonymous\@cvs-mirror.mozilla.org:/cvsroot
#
# Note that win32 may not need \@, depends on ' or ".
# :pserver:$ENV{USER}%netscape.com@cvs.mozilla.org:/cvsroot
#$moz_cvsroot = $ENV{CVSROOT};
#- Set these proper values for your tinderbox server
#$Tinderbox_server = 'tinderbox-daemon@tinderbox.mozilla.org';
# Allow for non-client builds, e.g. camino.
#$moz_client_mk = 'client.mk';
#- Set if you want to build in a separate object tree
#$ObjDir = '';
# Extra build name, if needed.
$BuildNameExtra = 'fxnewref-win32-tbox perf test';
# User comment, eg. ip address for dhcp builds.
# ex: $UserComment = "ip = 208.12.36.108";
#$UserComment = 0;
#-
#- The rest should not need to be changed
#-
#- Minimum wait period from start of build to start of next build in minutes.
#$BuildSleep = 10;
#- Until you get the script working. When it works,
#- change to the tree you're actually building
$BuildTree = 'Firefox';
$BuildTag = 'HEAD';
#$BuildConfigDir = 'mozilla/config';
#$Topsrcdir = 'mozilla';
$BinaryName = 'firefox.exe';
#
# For embedding app, use:
#$EmbedBinaryName = 'TestGtkEmbed';
#$EmbedDistDir = 'dist/bin'
#$ShellOverride = ''; # Only used if the default shell is too stupid
#$ConfigureArgs = '';
#$ConfigureEnvArgs = '';
#$Compiler = 'gcc';
#$NSPRArgs = '';
#$ShellOverride = '';
# Release build options
#$ReleaseBuild = 1;
#$clean_objdir = 1; # remove objdir when starting release cycle?
#$clean_srcdir = 1; # remove srcdir when starting release cycle?
#$shiptalkback = 1;
#$ReleaseToLatest = 1; # Push the release to latest-<milestone>?
#$ReleaseToDated = 1; # Push the release to YYYY-MM-DD-HH-<milestone>?
#$ReleaseGroup = ''; # group to set uploaded files to
#$build_hour = "8";
#$package_creation_path = "/xpinstall/packager";
# needs setting for mac + talkback: $mac_bundle_path = "/browser/app";
#$ssh_version = "2";
#$ssh_user = "cltbld";
#$ssh_server = "stage.mozilla.org";
#$ftp_path = "/home/ftp/pub/mozilla/nightly/experimental";
#$url_path = "http://ftp.mozilla.org/pub/mozilla.org/mozilla/nightly/experimental";
#$tbox_ftp_path = $ftp_path;
#$tbox_url_path = $url_path;
#$milestone = "trunk";
#$notify_list = "cmp\@mozilla.org";
#$stub_installer = 1;
#$sea_installer = 1;
#$archive = 0;
#$push_raw_xpis = 1;
# Reboot the OS at the end of build-and-test cycle. This is primarily
# intended for Win9x, which can't last more than a few cycles before
# locking up (and testing would be suspect even after a couple of cycles).
# Right now, there is only code to force the reboot for Win9x, so even
# setting this to 1, will not have an effect on other platforms. Setting
# up win9x to automatically logon and begin running tinderbox is left
# as an exercise to the reader.
#$RebootSystem = 0;
# LogCompression specifies the type of compression used on the log file.
# Valid options are 'gzip', and 'bzip2'. Please make sure the binaries
# for 'gzip' or 'bzip2' are in the user's path before setting this
# option.
#$LogCompression = '';
# LogEncoding specifies the encoding format used for the logs. Valid
# options are 'base64', and 'uuencode'. If $LogCompression is set above,
# this needs to be set to 'base64' or 'uuencode' to ensure that the
# binary data is transferred properly.
#$LogEncoding = '';
# Prevent Extension Manager from spawning child processes during tests
# - processes that tbox scripts cannot kill.
#$ENV{NO_EM_RESTART} = '1';
# If tinderbox is running in a test-only mode, it needs to be able to download
# the latest build and unpack it rather than building it.
$TestOnlyTinderbox = 1;
$DownloadBuildFile = 'firefox-3.0a8pre.en-US.win32.zip';
$DownloadBuildURL = 'http://stage.mozilla.org/pub/mozilla.org/firefox/nightly/experimental/win32-newref/hourly-builds/latest-trunk';
$DownloadBuildDir = 'firefox';