Removed some remaining SelectVisible calls in favor of CanSeeBug

git-svn-id: svn://10.0.0.236/branches/Bugzilla_PgSQL_branch@121533 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/build/mac/IDE_Options.h

@@ -1,132 +0,0 @@
-/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: NPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Netscape Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License at
- * http://www.mozilla.org/NPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is 
- * Netscape Communications Corporation.
- * Portions created by the Initial Developer are Copyright (C) 1998
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the NPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the NPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-/*
-
-	This file overrides all option settings in the IDE.  It is an attempt to allow all builds
-	to have the same options.
-
-	Note: We can't use ConditionalMacros.h in this file because it will conflict with 
-	the PowerPlant precompiled headers.
-
-*/
-
-	/* warning pragmas */
-#pragma warn_hidevirtual 		on
-#pragma warn_emptydecl 			on
-#pragma warn_unusedvar 			on
-#pragma warn_extracomma 		on
-#pragma warn_illpragma 			on
-#pragma warn_possunwant 		on
-#pragma warn_unusedarg 			off		/* turned off to reduce warnings */
-
-#pragma check_header_flags 		on
-
-	/* Language features that must be the same across libraries... */
-#pragma enumsalwaysint			on
-#pragma unsigned_char			off
-#pragma exceptions				on
-#pragma bool 					on
-#pragma wchar_type              on
-#pragma RTTI                    on
-
-
-	/* Save as much space as possible with strings... */
-#pragma pool_strings				on
-#pragma dont_reuse_strings			off
-
-#pragma options align=native
-#pragma sym 						on				/* Takes no memory.  OK in non-debug. */
-
-
-
-#ifdef powerc /* ...generating PowerPC */
-	#pragma toc_data 				on
-	#pragma fp_contract 			on
-	#pragma readonly_strings 		on
-
-	#ifdef DEBUG
-		#pragma profile 		off							/* Turn this on to profile the application. */
-																				/* Look for more details about profiling in nsMacMessagePump.cpp.  */
-		#pragma traceback 			on
-		#pragma global_optimizer 	off
-		#pragma scheduling 			off
-		#pragma peephole 			off
-		#pragma optimize_for_size 	off
-	#else
-		
-		#if TARGET_CARBON
-			#pragma traceback		on					/* should always be ON for Carbon builds */
-		#else
-			#pragma traceback		off					/* leave on until the final release, so MacsBug logs are interpretable */
-		#endif
-		
-		#pragma global_optimizer 	on
-		#pragma optimization_level 	4
-		#pragma scheduling 			603
-		#pragma peephole 			on
-		#pragma optimize_for_size	on
-
-    #pragma opt_strength_reduction on
-    #pragma opt_propagation on
-    #pragma opt_loop_invariants on
-    #pragma opt_lifetimes on
-    #pragma opt_dead_code on
-    #pragma opt_dead_assignments on
-    #pragma opt_common_subs on
-	#endif
-
-#else /* ...generating 68k */
-	#pragma code68020 			on
-	#pragma code68881 			off
-
-		/* Far everything... */
-	#pragma far_code
-	#pragma far_data 			on
-	#pragma far_strings 		on
-	#pragma far_vtables 		on
-
-	#pragma fourbyteints		on	/* 4-byte ints */
-	#pragma IEEEdoubles			on	/* 8-byte doubles (as required by Java and NSPR) */
-
-	#ifdef DEBUG
-		#pragma macsbug 		on
-		#pragma oldstyle_symbols off
-	#else
-		#pragma macsbug 		off
-	#endif
-#endif

mozilla/build/mac/MANIFEST

@@ -1,5 +0,0 @@
-#
-# This is a list of local files which get copied to the mozilla:dist directory
-#
-
-IDE_Options.h

mozilla/build/mac/NSCrossProductDefines.h

@@ -1,59 +0,0 @@
-/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: NPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Netscape Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License at
- * http://www.mozilla.org/NPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is 
- * Netscape Communications Corporation.
- * Portions created by the Initial Developer are Copyright (C) 1998
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the NPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the NPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-#error "DonÕt use me!"
-
-#define OLDROUTINELOCATIONS 0
-#define XP_MAC 1
-#define NSPR20 1
-#define _NO_FAST_STRING_INLINES_ 1
-#define HAVE_BOOLEAN 1
-#define NETSCAPE 1
-#define OTUNIXERRORS 1		/* We want OpenTransport error codes */
-
-#define OJI 1
-
-/*
-	This compiles in heap dumping utilities and other good stuff
- for developers -- maybe we only want it in for a special SDK
- nspr/java runtime(?):
-*/
-#define DEVELOPER_DEBUG 1
-
-#define	MAX(_a,_b)	((_a) < (_b) ? (_b) : (_a))
-#define	MIN(_a,_b)	((_a) < (_b) ? (_a) : (_b))

mozilla/build/mac/build_scripts/BuildMozilla.pl

@@ -1,80 +0,0 @@
-#!perl
-
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#   Simon Fraser <sfraser@netscape.com>
-#
-
-require 5.004;
-
-use strict;
-
-use Cwd;
-use Moz::BuildUtils;
-use Moz::BuildCore;
-
-#-------------------------------------------------------------
-# Where have the build options gone?
-# 
-# The various build flags have been centralized into one place. 
-# The master list of options is in MozBuildFlags.txt. However, 
-# you should never need to edit that file, or this one.
-# 
-# To customize what gets built, or where to start the build, 
-# edit the $prefs_file_name file in
-# System Folder:Preferences:Mozilla build prefs:
-# Documentation is provided in that file.
-#-------------------------------------------------------------
-
-my($prefs_file_name) = "Mozilla opt build prefs";
-my($config_header_file_name) = ":mozilla:config:mac:DefinesOptions.h";
-
-#-------------------------------------------------------------
-# hashes to hold build options
-#-------------------------------------------------------------
-my(%build);
-my(%options);
-my(%filepaths);
-my(%optiondefines);
-
-# Hash of input files for this build. Eventually, there will be
-# input files for manifests, and projects too.
-my(%inputfiles) = (
-  "buildflags",     "MozillaBuildFlags.txt",
-  "checkoutdata",   "MozillaCheckoutList.txt",
-  "buildprogress",  "¥ Mozilla opt progress",
-  "buildmodule",    "MozillaBuildList.pm",
-  "checkouttime",   "Mozilla last checkout"
-);
-#-------------------------------------------------------------
-# end build hashes
-#-------------------------------------------------------------
-
-# set the build root directory, which is the the dir above mozilla
-SetupBuildRootDir(":mozilla:build:mac:build_scripts");
-
-# Set up all the flags on $main::, like DEBUG, CARBON etc.
-# Override the defaults using the preferences files.
-SetupDefaultBuildOptions(0, ":mozilla:dist:viewer:", $config_header_file_name);
-
-my($do_checkout)    = 0;
-my($do_build)       = 1;
-
-RunBuild($do_checkout, $do_build, \%inputfiles, $prefs_file_name);

mozilla/build/mac/build_scripts/BuildMozillaDebug.pl

@@ -1,80 +0,0 @@
-#!perl
-
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#   Simon Fraser <sfraser@netscape.com>
-#
-
-require 5.004;
-
-use strict;
-
-use Cwd;
-use Moz::BuildUtils;
-use Moz::BuildCore;
-
-#-------------------------------------------------------------
-# Where have the build options gone?
-# 
-# The various build flags have been centralized into one place. 
-# The master list of options is in MozBuildFlags.txt. However, 
-# you should never need to edit that file, or this one.
-# 
-# To customize what gets built, or where to start the build, 
-# edit the $prefs_file_name file in
-# System Folder:Preferences:Mozilla build prefs:
-# Documentation is provided in that file.
-#-------------------------------------------------------------
-
-my($prefs_file_name) = "Mozilla debug build prefs";
-my($config_header_file_name) = ":mozilla:config:mac:DefinesOptionsDebug.h";
-
-#-------------------------------------------------------------
-# hashes to hold build options
-#-------------------------------------------------------------
-my(%build);
-my(%options);
-my(%filepaths);
-my(%optiondefines);
-
-# Hash of input files for this build. Eventually, there will be
-# input files for manifests, and projects too.
-my(%inputfiles) = (
-  "buildflags",     "MozillaBuildFlags.txt",
-  "checkoutdata",   "MozillaCheckoutList.txt",
-  "buildprogress",  "¥ Mozilla debug progress",
-  "buildmodule",    "MozillaBuildList.pm",
-  "checkouttime",   "Mozilla last checkout"
-);
-#-------------------------------------------------------------
-# end build hashes
-#-------------------------------------------------------------
-
-# set the build root directory, which is the the dir above mozilla
-SetupBuildRootDir(":mozilla:build:mac:build_scripts");
-
-# Set up all the flags on $main::, like DEBUG, CARBON etc.
-# Override the defaults using the preferences files.
-SetupDefaultBuildOptions(1, ":mozilla:dist:viewer_debug:", $config_header_file_name);
-
-my($do_pull)        = 0;    # overridden by flags and prefs
-my($do_build)       = 1;
-
-RunBuild($do_pull, $do_build, \%inputfiles, $prefs_file_name);

mozilla/build/mac/build_scripts/Moz/BuildCore.pm

@@ -1,595 +0,0 @@
-#!perl -w
-package Moz::BuildCore;
-
-require 5.004;
-require Exporter;
-
-use strict;
-use vars qw( @ISA @EXPORT );
-
-# perl includes
-use Cwd;
-use POSIX;
-use Time::Local;
-use File::Basename;
-use LWP::Simple;
-
-# homegrown
-use Moz::Moz;
-use Moz::Jar;
-use Moz::BuildFlags;
-use Moz::BuildUtils;
-use Moz::CodeWarriorLib;
-
-# use MozillaBuildList;   # eventually, this should go away, and be replaced by data input
-
-
-@ISA        = qw(Exporter);
-@EXPORT     = qw(
-                    RunBuild
-                );
-
-
-#//--------------------------------------------------------------------------------------------------
-#// DoPrebuildCheck
-#//
-#// Check the build tools etc before running the build.
-#//--------------------------------------------------------------------------------------------------
-sub DoPrebuildCheck()
-{
-    SanityCheckBuildOptions();
-
-    # launch codewarrior and persist its location. Have to call this before first
-    # call to getCodeWarriorPath().
-    my($ide_path_file) = $main::filepaths{"idepath"};
-    $ide_path_file = full_path_to($ide_path_file);
-    LaunchCodeWarrior($ide_path_file);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// SanityCheckBuildOptions
-#//--------------------------------------------------------------------------------------------------
-sub SanityCheckBuildOptions()
-{
-    my($bad_options) = 0;
-
-    # Jar options
-    if (!$main::options{chrome_jars} && !$main::options{chrome_files})
-    {
-        print "Warning: Both \$options{chrome_jars} and \$options{chrome_files} are off. You won't get any chrome.\n";
-        $bad_options = 1;
-    }
-
-    if (!$main::options{chrome_jars} && $main::options{use_jars})
-    {
-        print "Warning: \$options{chrome_jars} is off but \$options{use_jars} is on. Your build won't run (expects jars, got files).\n";
-        $bad_options = 1;
-    }
-
-    if (!$main::options{chrome_files} && !$main::options{use_jars})
-    {
-        print "Warning: \$options{chrome_jars} is off but \$options{chrome_files} is on. Your build won't run (expects files, got jars).\n";
-        $bad_options = 1;
-    }
-
-    if ($main::options{ldap_experimental} && !$main::options{ldap})
-    {
-        print "Warning: \$options{ldap_experimental} is on but \$options{ldap} is off. LDAP experimental features will not be built.\n";
-        $bad_options = 1;
-    }
-
-    if ($main::options{wsp} && !$main::options{xmlextras})
-    {
-        print "Warning: \$options{wsp} is on but \$options{xmlextras} is off. wsp will not be built.\n";
-        $bad_options = 1;
-    }
-
-    if ($bad_options) {
-        print "Build will start in 5 seconds. Press command-. to stop\n";
-        
-        DelayFor(5);
-    }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// GenBuildSystemInfo
-#//--------------------------------------------------------------------------------------------------
-
-sub GenBuildSystemInfo()
-{
-    # always rebuild the configuration program.
-    BuildProjectClean(":mozilla:build:mac:tools:BuildSystemInfo:BuildSystemInfo.mcp", "BuildSystemInfo");
-
-    # delete the configuration file.
-    unlink(":mozilla:build:mac:BuildSystemInfo.pm");
-    
-    # run the program.
-    system(":mozilla:build:mac:BuildSystemInfo");
-
-    # wait for the file to be created.
-    while (!(-e ":mozilla:build:mac:BuildSystemInfo.pm")) { WaitNextEvent(); }
-    
-    # wait for BuildSystemInfo to finish, so that we see correct results.
-    while (IsProcessRunning("BuildSystemInfo")) { WaitNextEvent(); }
-
-    # now, evaluate the contents of the file.
-    open(F, ":mozilla:build:mac:BuildSystemInfo.pm");
-    while (<F>) { eval; }
-    close(F);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// Make library aliases
-#//--------------------------------------------------------------------------------------------------
-
-sub MakeLibAliases()
-{
-    my($dist_dir) = GetBinDirectory();
-
-    #// ProfilerLib
-    if ($main::PROFILE)
-    {
-        my($profilerlibpath) = Moz::CodeWarriorLib::getCodeWarriorPath("MacOS Support:Profiler:Profiler Common:ProfilerLib");
-        MakeAlias("$profilerlibpath", "$dist_dir"."Essential Files:");
-    }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// ConfigureBuildSystem
-#//
-#// defines some build-system configuration variables.
-#//--------------------------------------------------------------------------------------------------
-sub ConfigureBuildSystem()
-{
-    #// In the future, we may want to do configurations based on the actual build system itself.
-    #// GenBuildSystemInfo();
-        
-    #// For now, if we discover a newer header file than existed in Universal Interfaces 3.2,
-    #// we'll assume that 3.3 or later is in use.
-    my($universal_interfaces) = Moz::CodeWarriorLib::getCodeWarriorPath("MacOS Support:Universal:Interfaces:CIncludes:");
-    if (-e ($universal_interfaces . "ControlDefinitions.h")) {
-        $main::UNIVERSAL_INTERFACES_VERSION = 0x0330;
-    }
-
-    #// Rename IC SDK folder in the Mac OS Support folder
-    my($ic_sdk_folder) = Moz::CodeWarriorLib::getCodeWarriorPath("MacOS Support:ICProgKit2.0.2");
-    if( -e $ic_sdk_folder)
-    {
-        my($new_ic_folder_name) = Moz::CodeWarriorLib::getCodeWarriorPath("MacOS Support:(ICProgKit2.0.2)");
-        rename ($ic_sdk_folder, $new_ic_folder_name);
-        # note that CodeWarrior doesn't descend into folders with () the name
-        print "Mozilla no longer needs the Internet Config SDK to build:\n  Renaming the 'ICProgKit2.0.2' folder to '(ICProgKit2.0.2)'\n";
-    }
-
-    printf("UNIVERSAL_INTERFACES_VERSION = 0x%04X\n", $main::UNIVERSAL_INTERFACES_VERSION);
-
-    # alias required CodeWarrior libs into the Essential Files folder (only the Profiler lib now)
-    MakeLibAliases();
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// CheckOutModule. Takes variable number of args; first two are required
-#//--------------------------------------------------------------------------------------------------
-sub CheckOutModule($$$$)
-{
-    my($session, $module, $revision, $date) = @_;
-
-    my($result) = $session->checkout($module, $revision, $date);
-    
-    # result of 1 is success
-    if ($result) { return; }
-    
-    my($checkout_err) = $session->getLastError();
-    if ($checkout_err == 708) {
-        die "Error: Checkout was cancelled.\n";
-    } elsif ($checkout_err == 911) {
-        die "Error: CVS session settings are incorrect. Check your password, and the CVS root settings.\n";
-    } elsif ($checkout_err == 703) {
-        die "Error: CVS checkout failed. Unknown module, unknown tag, bad username, or other CVS error.\n";
-    } elsif ($checkout_err == 711) {
-        print "Checkout of '$module' failed.\n";
-    }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// getScriptFolder
-#//--------------------------------------------------------------------------------------------------
-sub getScriptFolder()
-{
-    return dirname($0);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getScriptFolder
-#//--------------------------------------------------------------------------------------------------
-sub get_url_contents($)
-{
-    my($url) = @_;
-
-    my($url_contents) = LWP::Simple::get($url);
-    $url_contents =~ s/\r\n/\n/g;     # normalize linebreaks
-    $url_contents =~ s/\r/\n/g;       # normalize linebreaks
-    return $url_contents;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// get_files_from_content
-#//--------------------------------------------------------------------------------------------------
-sub uniq
-{
-    my $lastval;
-    grep(($_ ne $lastval, $lastval = $_)[$[], @_);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// get_files_from_content
-#//--------------------------------------------------------------------------------------------------
-sub get_files_from_content($)
-{
-    my($content) = @_;
-  
-    my(@jscalls) = grep (/return js_file_menu[^{]*/, split(/\n/, $content));
-    my $i;
-  
-    for ($i = 0; $i < @jscalls ; $i++)
-    {
-        $jscalls[$i] =~ s/.*\(|\).*//g;
-        my(@callparams) = split(/,/, $jscalls[$i]);
-        my ($repos, $dir, $file, $rev) = grep(s/['\s]//g, @callparams);
-        $jscalls[$i] = "$dir/$file";
-    }
-
-  &uniq(sort(@jscalls));
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// getLastUpdateTime
-#// 
-#// Get the last time we updated. Return 0 on failure
-#//--------------------------------------------------------------------------------------------------
-sub getLastUpdateTime($)
-{
-    my($timestamp_file) = @_;
- 
-    my($time_string);
-    
-    local(*TIMESTAMP_FILE);  
-    unless (open(TIMESTAMP_FILE, "< $timestamp_file")) { return 0; }
-
-    while (<TIMESTAMP_FILE>)
-    {
-        my($line) = $_;
-        chomp($line);
-
-        # ignore comments and empty lines
-        if ($line =~ /^\#/ || $line =~ /^\s*$/) {
-            next;
-        }
-        
-        $time_string = $line;
-    }
-
-    # get the epoch seconds
-    my($last_update_secs) = $time_string;
-    $last_update_secs =~ s/\s#.+$//;
-    
-    print "FAST_UPDATE found that you last updated at ".localtime($last_update_secs)."\n";
-    
-    # how long ago was this, in hours?
-    my($gm_now) = time();
-    my($update_hours) = 1 + ceil(($gm_now - $last_update_secs) / (60 * 60));
-    
-    return $update_hours;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// saveCheckoutTimestamp
-#// 
-#// Create a file on disk containing the current time. Param is time(), which is an Epoch seconds
-#// (and therefore in GMT).
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub saveCheckoutTimestamp($$)
-{
-    my($gm_secs, $timestamp_file) = @_;
-        
-    local(*TIMESTAMP_FILE);
-    open(TIMESTAMP_FILE, ">$timestamp_file") || die "Failed to open $timestamp_file\n";
-    print(TIMESTAMP_FILE "# time of last checkout or update, in GMT. Used by FAST_UPDATE\n");
-    print(TIMESTAMP_FILE "$gm_secs \# around ".localtime()." local time\n");
-    close(TIMESTAMP_FILE);
-
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// FastUpdate
-#// 
-#// Use Bonsai url data to update only those dirs which have new files
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub FastUpdate($$)
-{
-    my($modules, $timestamp_file) = @_;          # list of modules to check out
-
-    my($num_hours) = getLastUpdateTime($timestamp_file);
-    if ($num_hours == 0 || $num_hours > 170) {
-        print "Can't fast_update; last update was too long ago, or never. Doing normal checkout.\n";
-        return 0;
-    }
-
-    print "Doing fast update, pulling files changed in the last $num_hours hours\n";
-
-    my($cvsfile) = AskAndPersistFile($main::filepaths{"sessionpath"});
-    my($session) = Moz::MacCVS->new( $cvsfile );
-    unless (defined($session)) { die "Error: Checkout aborted. Cannot create session file: $session" }
-
-    # activate MacCVS
-    ActivateApplication('Mcvs');
-    
-    my($checkout_start_time) = time();
-
-    #print "Time now is $checkout_start_time ($checkout_start_time + 0)\n";
-    
-    my($this_co);
-    foreach $this_co (@$modules)
-    {
-        my($module, $revision, $date) = ($this_co->[0], $this_co->[1], $this_co->[2]);        
-        
-        # assume that things pulled by date wont change
-        if ($date ne "") {
-            print "$module is pulled by date, so ignoring in FastUpdate.\n";
-            next;
-        }
-
-        my($search_type) = "hours";
-        my($min_date) = "";
-        my($max_date) = "";
-        my($url) = "http://bonsai.mozilla.org/cvsquery.cgi?treeid=default&module=${module}&branch=${revision}&branchtype=match&dir=&file=&filetype=match&who=&whotype=match&sortby=Date&hours=${num_hours}&date=${search_type}&mindate=${min_date}&maxdate=${max_date}&cvsroot=%2Fcvsroot";
-
-        if ($revision eq "") {
-            print "Getting list of checkins to $module from Bonsai...\n";
-        } else {
-            print "Getting list of checkins to $module on branch $revision from Bonsai...\n";
-        }
-        my(@files) = &get_files_from_content(&get_url_contents($url));
-
-        if ($#files > 0)
-        {
-           my(@cvs_co_list);
-        
-           my($co_file);
-           foreach $co_file (@files)
-           {
-               print "Updating $co_file\n";
-               push(@cvs_co_list, $co_file);
-           }
-
-            my($result) = $session->update($revision, \@cvs_co_list);
-            # result of 1 is success
-            if (!$result) { die "Error: Fast update failed\n"; }
-        } else {
-            print "No files in this module changed\n";        
-        }
-    }
-    
-    saveCheckoutTimestamp($checkout_start_time, $timestamp_file);
-    return 1;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// Checkout
-#//--------------------------------------------------------------------------------------------------
-sub CheckoutModules($$$)
-{
-    my($modules, $pull_date, $timestamp_file) = @_;          # list of modules to check out
-
-    my($start_time) = TimeStart();
-
-#    assertRightDirectory();
-    my($cvsfile) = AskAndPersistFile($main::filepaths{"sessionpath"});
-    my($session) = Moz::MacCVS->new( $cvsfile );
-    unless (defined($session)) { die "Error: Checkout aborted. Cannot create session file: $session" }
-
-    my($checkout_start_time) = time();
-    
-    # activate MacCVS
-    ActivateApplication('Mcvs');
-
-    my($this_co);
-    foreach $this_co (@$modules)
-    {
-        my($module, $revision, $date) = ($this_co->[0], $this_co->[1], $this_co->[2]);
-        if ($date eq "") {
-            $date = $pull_date;
-        }
-        CheckOutModule($session, $module, $revision, $date);
-        # print "Checking out $module with ref $revision, date $date\n";
-    }
-
-    saveCheckoutTimestamp($checkout_start_time, $timestamp_file);
-    TimeEnd($start_time, "Checkout");
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// ReadCheckoutModulesFile
-#//--------------------------------------------------------------------------------------------------
-sub ReadCheckoutModulesFile($$)
-{
-    my($modules_file, $co_list) = @_;
-
-    my($checkout_file) = getScriptFolder().":".$modules_file;
-    local(*CHECKOUT_FILE);  
-    open(CHECKOUT_FILE, "< $checkout_file") || die "Error: failed to open checkout list $checkout_file\n";
-    while (<CHECKOUT_FILE>)
-    {
-        my($line) = $_;
-        chomp($line);
-    
-        # ignore comments and empty lines
-        if ($line =~ /^\#/ || $line =~ /^\s*$/) {
-            next;
-        }
-    
-        my(@cvs_co) = ["", "", ""];
-        
-        my($module, $revision, $date) = (0, 1, 2);
-        
-        if ($line =~ /\s*([^#,\s]+)\s*\,\s*([^#,\s]+)\s*\,\s*([^#]+)/)
-        {
-            @cvs_co[$module] = $1;
-            @cvs_co[$revision] = $2;
-            @cvs_co[$date] = $3;
-        }
-        elsif ($line =~ /\s*([^#,\s]+)\s*\,\s*([^#,\s]+)\s*(#.+)?/)
-        {
-            @cvs_co[$module] = $1;
-            @cvs_co[$revision] = $2;
-        }
-        elsif ($line =~ /\s*([^#,\s]+)\s*\,\s*,\s*([^#,]+)/)       
-        {
-            @cvs_co[$module] = $1;
-            @cvs_co[$date] = $2;
-        }
-        elsif ($line =~ /\s*([^#,\s]+)/)
-        {
-            @cvs_co[$module] = $1;
-        }
-        else
-        {
-            die "Error: unrecognized line '$line' in $modules_file\n";
-        }
-        
-        # strip surrounding space from date
-        @cvs_co[$date] =~ s/^\s*|\s*$//g;
-        
-        # print "Going to check out '@cvs_co[$module]', '@cvs_co[$revision]', '@cvs_co[$date]'\n";
-        push(@$co_list, \@cvs_co);
-    }
-
-    close(CHECKOUT_FILE);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// PullFromCVS
-#//--------------------------------------------------------------------------------------------------
-sub PullFromCVS($$)
-{
-    unless ( $main::build{pull} ) { return; }
-    
-    my($modules_file, $timestamp_file) = @_;
-
-    StartBuildModule("pull");
-    
-    my(@cvs_co_list);
-    ReadCheckoutModulesFile($modules_file, \@cvs_co_list);
-
-    if ($main::FAST_UPDATE && $main::options{pull_by_date})
-    {
-        die "Error: you can't use FAST_UPDATE if you are pulling by date.\n";
-    }
-
-    my($did_fast_update) = $main::FAST_UPDATE && FastUpdate(\@cvs_co_list, $timestamp_file);
-    if (!$did_fast_update)
-    {
-        my($pull_date) = "";
-        if ($main::options{pull_by_date})
-        {
-            # acceptable CVS date formats are (in local time):
-            # ISO8601 (e.g. "1972-09-24 20:05") and Internet (e.g. "24 Sep 1972 20:05").
-            # Perl's localtime() string format also seems to work.
-            $pull_date = localtime().""; # force string interp.
-            print "Pulling by date $pull_date\n";
-        }
-
-        CheckoutModules(\@cvs_co_list, $pull_date, $timestamp_file);
-    }
-
-    EndBuildModule("pull");
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// RunBuild
-#//--------------------------------------------------------------------------------------------------
-sub RunBuild($$$$)
-{
-    my($do_pull, $do_build, $input_files, $build_prefs) = @_;
-
-    InitBuildProgress($input_files->{"buildprogress"});
-    
-    # if we are pulling, we probably want to do a full build, so clear the build progress
-    if ($do_pull) {
-        ClearBuildProgress();    
-    }
-    
-    # read local prefs, and the build progress file, and set flags to say what to build
-    SetupBuildParams(\%main::build,
-                     \%main::options,
-                     \%main::optiondefines,
-                     \%main::filepaths,
-                     $input_files->{"buildflags"},
-                     $build_prefs);
-    
-    # If we were told to pull, make sure we do, overriding prefs etc.
-    if ($do_pull)
-    {
-        $main::build{"pull"} = 1;
-    }
-    
-    # transfer this flag
-    $CodeWarriorLib::CLOSE_PROJECTS_FIRST = $main::CLOSE_PROJECTS_FIRST;
-    
-    # setup the build log
-    SetupBuildLog($main::filepaths{"buildlogfilepath"}, $main::USE_TIMESTAMPED_LOGS);
-    StopForErrors();
-    
-    if ($main::LOG_TO_FILE) {
-        RedirectOutputToFile($main::filepaths{"scriptlogfilepath"});
-    }
-        
-    # run a pre-build check to see that the tools etc are in order
-    DoPrebuildCheck();
-    
-    # do the pull
-    PullFromCVS($input_files->{"checkoutdata"}, $input_files->{"checkouttime"});
-    
-    unless ($do_build) { return; }
-
-    my($build_start) = TimeStart();
-
-    # check the build environment
-    ConfigureBuildSystem();
-
-    # here we load and call methods in the build module indirectly.
-    # we have to use indirection because the build module can be named
-    # differently for different builds.
-    chdir(dirname($0));     # change to the script dir
-    my($build_module) = $input_files->{"buildmodule"};
-    # load the build module
-    require $build_module;
-    {   # scope for no strict 'refs'
-        no strict 'refs';
-        
-        my($package_name) = $build_module;
-        $package_name =~ s/\.pm$//;
-        
-        chdir($main::MOZ_SRC);
-        &{$package_name."::BuildDist"}();
-        
-        chdir($main::MOZ_SRC);
-        &{$package_name."::BuildProjects"}();
-    }
-    
-    # the build finished, so clear the build progress state
-    ClearBuildProgress();
-    
-    TimeEnd($build_start, "Build");
-    print "Build complete\n";
-}
-
-1;

mozilla/build/mac/build_scripts/Moz/BuildFlags.pm

@@ -1,425 +0,0 @@
-#!perl -w
-package Moz::BuildFlags;
-
-require 5.004;
-require Exporter;
-
-# Package that attempts to read a file from the Preferences folder,
-# and get build settings out of it
-
-use strict;
-use Exporter;
-
-use Cwd;
-use File::Basename;
-
-use Moz::Moz;
-use Moz::Prefs;
-
-use vars qw(@ISA @EXPORT);
-
-@ISA      = qw(Exporter);
-@EXPORT   = qw(
-                SetupBuildParams
-                InitBuildProgress
-                WriteBuildProgress
-                ClearBuildProgress
-                ReadBuildProgress
-              );
-
-
-my(@build_flags);
-my(@options_flags);
-my(@filepath_flags);
-
-my(%arrays_list) = (
-  "build_flags",    \@build_flags,
-  "options_flags",  \@options_flags,
-  "filepath_flags", \@filepath_flags
-);
-
-my($progress_file) = "¥ÊBuild progress";
-
-#-------------------------------------------------------------------------------
-# appendArrayFlag
-# 
-# Set a flag in the array
-#-------------------------------------------------------------------------------
-sub appendArrayFlag(@)
-{
-  my($array_name) = shift;
-  my($setting) = shift;
-  my($value) = shift;
-  
-  my(@optional_values);
-  foreach (@_) {
-    push(@optional_values, $_);
-  }
-
-  my(@this_flag) = [$setting, $value, @optional_values];
-  my($flags_array) = $arrays_list{$array_name};
-  if ($flags_array)
-  {
-    push(@{$flags_array}, @this_flag) || die "Failed to append\n";
-  }
-  else
-  {
-    die "Error: unknown build flags array $array_name\n";
-  }
-}
-
-#-------------------------------------------------------------------------------
-# readFlagsFile
-# 
-# Read the file of build flags from disk. File path is relative to the
-# script directory.
-#-------------------------------------------------------------------------------
-sub readFlagsFile($)
-{
-  my($flags_file) = @_;
-
-  my($file_path) = $0;
-  $file_path =~ s/[^:]+$/$flags_file/;
-  
-  print "Reading build flags from '$file_path'\n";
-
-  local(*FLAGS_FILE);
-  open(FLAGS_FILE, "< $file_path") || die "Error: failed to open flags file $file_path\n";
-
-  my($cur_array) = "";
-  
-  while(<FLAGS_FILE>)
-  {
-      my($line) = $_;
-      chomp($line);
-      
-      # ignore comments and empty lines  
-      if ($line =~ /^\#/ || $line =~ /^\s*$/) {
-        next;
-      }
-
-      # 1-word line, probably array name
-      if ($line =~ /^([^#\s]+)\s*$/)
-      {
-        $cur_array = $1;
-        next;  
-      }
-      elsif ($line =~ /^([^#\s]+)\s+\"(.+)\"(\s+#.+)?$/)    # quoted option, possible comment
-      {
-        my($flag) = $1;
-        my($setting) = $2;
-        
-        appendArrayFlag($cur_array, $flag, $setting);
-      }
-      elsif ($line =~ /^([^#\s]+)((\s+[^#\s]+)+)(\s+#.+)?$/)  # multiple word line, possible comment
-      {
-        my($flag) = $1;
-        
-        appendArrayFlag($cur_array, $flag, split(' ', $2));
-      }
-      else
-      {
-        die "Error: unknown build flag at '$line'\n";
-      }
-  
-  }
-  
-  close(FLAGS_FILE);
-}
-
-
-
-#-------------------------------------------------------------------------------
-# flagsArrayToHash
-# 
-# Utility routine to migrate flag from a 2D array to a hash, where
-# item[n][0] is the hash entry name, and item[n][1] is the hash entry value.
-#-------------------------------------------------------------------------------
-
-sub flagsArrayToHash($$)
-{
-  my($src_array, $dest_hash) = @_;
-  
-  my($item);
-  foreach $item (@$src_array)
-  {
-    $dest_hash->{$item->[0]} = $item->[1];
-  }
-}
-
-#-----------------------------------------------
-# printHash
-#
-# Utility routine to print a hash
-#-----------------------------------------------
-sub printHash($)
-{
-  my($hash_ref) = @_;
- 
-  print "Printing hash:\n";
-  
-  my($key, $value);
-  
-  while (($key, $value) = each (%$hash_ref))
-  {
-    print "  $key $value\n";
-  }
-}
-
-
-#-----------------------------------------------
-# printBuildArray
-#
-# Utility routine to print a 2D array
-#-----------------------------------------------
-sub printBuildArray($)
-{
-  my($build_array) = @_;
-  
-  my($entry);
-  foreach $entry (@$build_array)
-  {  
-    print "$entry->[0] = $entry->[1]\n";
-  }
-
-}
-
-#-------------------------------------------------------------------------------
-# SetBuildFlags
-#-------------------------------------------------------------------------------
-sub SetBuildFlags($)
-{
-  my($build) = @_;
-
-  flagsArrayToHash(\@build_flags, $build);
-}
-
-#-------------------------------------------------------------------------------
-# SetBuildOptions
-#-------------------------------------------------------------------------------
-sub SetBuildOptions($)
-{
-  my($options) = @_;
-
-  flagsArrayToHash(\@options_flags, $options);
-}
-
-#-------------------------------------------------------------------------------
-# SetFilepathFlags
-#-------------------------------------------------------------------------------
-sub SetFilepathFlags($)
-{
-  my($filepath) = @_;
-
-  flagsArrayToHash(\@filepath_flags, $filepath);
-}
-
-#-------------------------------------------------------------------------------
-# SetOptionDefines
-#-------------------------------------------------------------------------------
-sub SetOptionDefines($)
-{
-  my($optiondefines) = @_;
-
-  foreach my $entry (@options_flags)
-  {
-    if (defined($entry->[2])) {
-      $optiondefines->{$entry->[0]}{$entry->[2]} = 1;
-    }
-  }
-}
-
-
-#-------------------------------------------------------------------------------
-# PropagateAllFlags
-#-------------------------------------------------------------------------------
-sub PropagateAllFlags($)
-{
-  my($build_array) = @_;
-  
-  # if "all" is set, set all the flags to 1
-  unless ($build_array->[0][0] eq "all") { die "Error: 'all' must come first in the flags array\n"; }
-  
-  if ($build_array->[0][1] == 1)
-  {
-    my($index);
-    foreach $index (@$build_array)
-    {
-      $index->[1] = 1;
-    }
-  }
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// _getBuildProgressFile
-#//--------------------------------------------------------------------------------------------------
-sub _getBuildProgressFile()
-{
-  return $progress_file;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// setBuildProgressStart
-#// 
-#// This automagically sets $build{"all"} to 0
-#//--------------------------------------------------------------------------------------------------
-sub setBuildProgressStart($$)
-{
-  my($build_array, $name) = @_;
-
-  my($index);
-  foreach $index (@$build_array)
-  {
-    $index->[1] = 0;
-    if ($index->[0] eq $name) {
-      last;
-    }    
-  }
-
-  print "Building from module after $name, as specified by build progress\n";
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// InitBuildProgress
-#//--------------------------------------------------------------------------------------------------
-sub InitBuildProgress($)
-{
-  my($prog_file) = @_;
-  if ($prog_file ne "") {
-    $progress_file = full_path_to($prog_file);
-    print "Writing build progress to $progress_file\n";
-  }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// WriteBuildProgress
-#//--------------------------------------------------------------------------------------------------
-sub WriteBuildProgress($)
-{
-  my($module_built) = @_;
-
-  my($progress_file) = _getBuildProgressFile();
-  
-  if ($progress_file ne "")
-  {
-    open(PROGRESS_FILE, ">>$progress_file") || die "Failed to open $progress_file\n";
-    print(PROGRESS_FILE "$module_built\n");
-    close(PROGRESS_FILE);
-  }
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// ClearBuildProgress
-#//--------------------------------------------------------------------------------------------------
-sub ClearBuildProgress()
-{
-  my($progress_file) = _getBuildProgressFile();
-  if ($progress_file ne "") {
-    unlink $progress_file;
-  }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// WipeBuildProgress
-#//--------------------------------------------------------------------------------------------------
-sub WipeBuildProgress()
-{
-  print "Ignoring build progress\n";
-  ClearBuildProgress();
-  $progress_file = "";
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// ReadBuildProgress
-#//--------------------------------------------------------------------------------------------------
-sub ReadBuildProgress($)
-{
-  my($build_array) = @_;
-  my($progress_file) = _getBuildProgressFile();
-
-  my($last_module);
-  
-  if (open(PROGRESS_FILE, "< $progress_file"))
-  {
-    print "Getting build progress from $progress_file\n";
-    
-    while (<PROGRESS_FILE>)
-    {
-      my($line) = $_;
-      chomp($line);
-      $last_module = $line;
-    }
-    
-    close(PROGRESS_FILE);
-  }
-  
-  if ($last_module)
-  {
-    setBuildProgressStart($build_array, $last_module);
-  }
-}
-
-#-------------------------------------------------------------------------------
-# clearOldBuildSettings
-#-------------------------------------------------------------------------------
-sub clearOldBuildSettings($$$$)
-{
-  my($build, $options, $optiondefines, $filepaths) = @_;
-
-  # empty the arrays in case we're being called twice
-  @build_flags = ();
-  @options_flags = ();
-  @filepath_flags = ();
-  
-  # and empty the hashes
-  %$build = ();
-  %$options = ();
-  %$optiondefines = ();
-  %$filepaths = ();
-}
-
-#-------------------------------------------------------------------------------
-# SetupBuildParams
-#-------------------------------------------------------------------------------
-sub SetupBuildParams($$$$$$)
-{
-  my($build, $options, $optiondefines, $filepaths, $flags_file, $prefs_file) = @_;
-  
-  # Empty the hashes and arrays, to wipe out any stale data.
-  # Needed because these structures persist across two build scripts
-  # called using 'do' from a parent script.
-  clearOldBuildSettings($build, $options, $optiondefines, $filepaths);
-  
-  # Read from the flags file, which sets up the various arrays
-  readFlagsFile($flags_file);
-  
-  # If 'all' is set in the build array, propagate that to all entries
-  PropagateAllFlags(\@build_flags);
-  
-  # read the user pref file, that can change values in the array
-  ReadMozUserPrefs($prefs_file, \@build_flags, \@options_flags, \@filepath_flags);
-
-  # If build progress exists, this clears flags in the array up to a certain point
-  if ($main::USE_BUILD_PROGRESS) {
-    ReadBuildProgress(\@build_flags);
-  } else {
-    WipeBuildProgress();
-  }
-  
-#  printBuildArray(\@build_flags);
-#  printBuildArray(\@options_flags);
-  
-  SetBuildFlags($build);
-  SetBuildOptions($options);
-  SetOptionDefines($optiondefines);
-  SetFilepathFlags($filepaths);
-  
-#  printHash($build);
-#  printHash($options);
-}
-
-
-1;

mozilla/build/mac/build_scripts/Moz/BuildUtils.pm

@@ -1,786 +0,0 @@
-
-package Moz::BuildUtils;
-
-require 5.004;
-require Exporter;
-
-# Package that contains build util functions specific to the Mozilla build
-# process.
-
-use strict;
-use Exporter;
-
-use Cwd;
-use File::Path;
-use File::Basename;
-
-use Mac::Events;
-use Mac::StandardFile;
-
-use Moz::Moz;
-use Moz::BuildFlags;
-use Moz::MacCVS;
-#use Moz::ProjectXML;  #optional; required for static build only
-
-use vars qw(@ISA @EXPORT);
-
-@ISA      = qw(Exporter);
-@EXPORT   = qw(
-                SetupDefaultBuildOptions
-                SetupBuildRootDir
-                StartBuildModule
-                EndBuildModule
-                GetBinDirectory
-                BuildOneProjectWithOutput
-                BuildOneProject
-                BuildProject
-                BuildProjectClean
-                BuildIDLProject
-                BuildFolderResourceAliases
-                AskAndPersistFile
-                DelayFor
-                TimeStart
-                TimeEnd
-                EmptyTree
-                SetupBuildLog
-                SetBuildNumber
-                SetTimeBomb
-                UpdateConfigHeader
-              );
-
-#//--------------------------------------------------------------------------------------------------
-#// SetupDefaultBuildOptions
-#//--------------------------------------------------------------------------------------------------
-sub SetupDefaultBuildOptions($$$)
-{
-    my($debug, $bin_dir, $config_header_file_name) = @_;
-
-    # Here we set up defaults for the various build flags.
-    # If you want to override any of these, it's best to do
-    # so via the relevant preferences file, which lives in
-    # System Folder:Preferences:Mozilla build prefs:{build prefs file}.
-    # For the name of the prefs file, see the .pl script that you
-    # run to start this build. The prefs files are created when
-    # you run the build, and contain some documentation.
-    
-    #-------------------------------------------------------------
-    # configuration variables that globally affect what is built
-    #-------------------------------------------------------------
-    $main::DEBUG                  = $debug;
-    $main::PROFILE                = 0;
-    $main::RUNTIME                = 0;    # turn on to just build runtime support and NSPR projects
-    $main::GC_LEAK_DETECTOR       = 0;    # turn on to use GC leak detection
-    $main::MOZILLA_OFFICIAL       = 0;    # generate build number
-    $main::LOG_TO_FILE            = 0;    # write perl output to a file
-    
-    #-------------------------------------------------------------
-    # configuration variables that affect the manner of building, 
-    # but possibly affecting the outcome.
-    #-------------------------------------------------------------    
-    $main::ALIAS_SYM_FILES        = $main::DEBUG;
-    $main::CLOBBER_LIBS           = 1;      # turn on to clobber existing libs and .xSYM files before
-                                            # building each project                         
-    # The following two options will delete all dist files (if you have $main::build{dist} turned on),
-    # but leave the directory structure intact.
-    $main::CLOBBER_DIST_ALL       = 1;    # turn on to clobber all aliases/files inside dist (headers/xsym/libs)
-    $main::CLOBBER_DIST_LIBS      = 0;    # turn on to clobber only aliases/files for libraries/sym files in dist
-    $main::CLOBBER_IDL_PROJECTS   = 0;    # turn on to clobber all IDL projects.
-    $main::CLOBBER_PROJECTS       = 0;    # turn on to remove object code from each project before building it
-    
-    $main::UNIVERSAL_INTERFACES_VERSION = 0x0320;
-    
-    #-------------------------------------------------------------
-    # configuration variables that are preferences for the build,
-    # style and do not affect what is built.
-    #-------------------------------------------------------------
-    $main::CLOSE_PROJECTS_FIRST   = 0;
-                                    # 1 = close then make (for development),
-                                    # 0 = make then close (for tinderbox).
-    $main::USE_TIMESTAMPED_LOGS   = 0;
-    $main::USE_BUILD_PROGRESS     = 1;    # track build progress for restartable builds
-    #-------------------------------------------------------------
-    # END OF CONFIG SWITCHES
-    #-------------------------------------------------------------
-    
-    $main::BIN_DIRECTORY = $bin_dir;
-    $main::DEFINESOPTIONS_FILE = $config_header_file_name;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// SetupBuildRootDir
-#//--------------------------------------------------------------------------------------------------
-sub SetupBuildRootDir($)
-{
-    my($rel_path_to_script) = @_;
-
-    my($cur_dir) = cwd();
-    $cur_dir =~ s/$rel_path_to_script$//;
-    chdir($cur_dir) || die "Error: failed to set build root directory to '$cur_dir'.\nYou probably need to put 'mozilla' one level down (in a folder).\n";
-    $main::MOZ_SRC = cwd();
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// StartBuildModule
-#//--------------------------------------------------------------------------------------------------
-sub StartBuildModule($)
-{
-    my($module) = @_;
-
-    print("---- Start of $module ----\n");
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// EndBuildModule
-#//--------------------------------------------------------------------------------------------------
-sub EndBuildModule($)
-{
-    my($module) = @_;
-    WriteBuildProgress($module);
-    print("---- End of $module ----\n");
-}
-
-#--------------------------------------------------------------------------------------------------
-# GetBinDirectory
-#--------------------------------------------------------------------------------------------------
-sub GetBinDirectory()
-{
-    if ($main::BIN_DIRECTORY eq "") { die "Dist directory not set\n"; }
-    return $main::BIN_DIRECTORY;
-}
-
-#--------------------------------------------------------------------------------------------------
-# AskAndPersistFile stores the information about the user pick inside
-# the file $session_storage
-#--------------------------------------------------------------------------------------------------
-sub AskAndPersistFile($)
-{
-    my ($sessionStorage) = @_;
-    my $cvsfile;
-
-    if (( -e $sessionStorage) &&
-        open( SESSIONFILE, $sessionStorage ))
-    {
-    # Read in the path if available
-        $cvsfile = <SESSIONFILE>;
-        chomp $cvsfile;
-        close SESSIONFILE;
-        if ( ! -e $cvsfile )
-        {
-            print STDERR "$cvsfile has disappeared\n";
-            undef $cvsfile;
-        }
-    }
-    unless (defined ($cvsfile))
-    {
-        # make sure that MacPerl is a front process
-        ActivateApplication('McPL');
-        MacPerl::Answer("Could not find your MacCVS session file. Please choose one", "OK");
-        
-        # prompt user for the file name, and store it
-        my $macFile = StandardGetFile( 0, "McvD");  
-        if ( $macFile->sfGood() )
-        {
-            $cvsfile = $macFile->sfFile();
-            # save the choice if we can
-            if ( open (SESSIONFILE, ">" . $sessionStorage))
-            {
-                printf SESSIONFILE $cvsfile, "\n";
-                close SESSIONFILE;
-            }
-            else
-            {
-                print STDERR "Could not open storage file $sessionStorage for saving $cvsfile\n";
-            }
-        }
-    }
-    return $cvsfile;
-}
-
-
-#--------------------------------------------------------------------------------------------------
-# BuildIDLProject
-#
-#--------------------------------------------------------------------------------------------------
-
-sub BuildIDLProject($$)
-{
-    my ($project_path, $module_name) = @_;
-
-    if ($main::CLOBBER_IDL_PROJECTS)
-    {
-        my (@suffix_list) = (".mcp", ".xml");
-        my ($project_name, $project_dir, $suffix) = fileparse($project_path, @suffix_list);
-        if ($suffix eq "") { die "Error: Project, $project_path must end in .xml or .mcp\n"; }
-
-        my($datafolder_path);
-        if ($suffix eq ".xml")
-        {
-            $datafolder_path = $project_dir . "_" . $project_name . " Data:";
-        }
-        else {
-            $datafolder_path = $project_dir . $project_name . " Data:";
-        }
-
-        print STDERR "Deleting IDL data folder: $datafolder_path\n";
-        EmptyTree($datafolder_path);
-    }
-
-    BuildOneProject($project_path,  "headers", 0, 0, 0);
-    BuildOneProject($project_path,  $module_name.".xpt", 1, 0, 1);
-}
-
-
-#--------------------------------------------------------------------------------------------------
-# CreateStaticLibTargets
-#
-#--------------------------------------------------------------------------------------------------
-sub CreateXMLStaticLibTargets($)
-{
-    my($xml_path) = @_;
-
-    my (@suffix_list) = (".xml");
-    my ($project_name, $project_dir, $suffix) = fileparse($xml_path, @suffix_list);
-    if ($suffix eq "") { die "XML munging: $xml_path must end in .xml\n"; }
-
-    #sniff the file to see if we need to fix up broken Pro5-exported XML
-    print "Parsing $xml_path\n";
-    
-    my $ide_version = Moz::ProjectXML::SniffProjectXMLIDEVersion($xml_path);
-    if ($ide_version eq "4.0")
-    {
-        my $new_file = $project_dir.$project_name."2.xml";
-        
-        print "Cleaning up Pro 5 xml to $new_file\n";
-        
-        Moz::ProjectXML::CleanupPro5XML($xml_path, $new_file);
-
-        unlink $xml_path;
-        rename ($new_file, $xml_path);
-    }
-    
-    my $doc = Moz::ProjectXML::ParseXMLDocument($xml_path);
-    my @target_list = Moz::ProjectXML::GetTargetsList($doc);
-    my $target;
-    
-    my %target_hash;    # for easy lookups below
-    foreach $target (@target_list) { $target_hash{$target} = 1; }
-    
-    foreach $target (@target_list)
-    {
-        if ($target =~ /(.+).shlb$/)        # if this is a shared lib target
-        {
-            my $target_base = $1;
-            my $static_target = $target_base.".o";
-            
-            # ensure that this does not exist already
-            if ($target_hash{$static_target}) {
-                print "Static target $static_target already exists in project. Not making\n";
-                next;
-            }
-            
-            print "Making static target '$static_target' from target '$target'\n";
-
-            Moz::ProjectXML::CloneTarget($doc, $target, $static_target);
-            Moz::ProjectXML::SetAsStaticLibraryTarget($doc, $static_target, $static_target);
-        }
-    }
-    
-    print "Writing XML file to $xml_path\n";
-    my $temp_path = $project_dir."_".$project_name.".xml";
-    Moz::ProjectXML::WriteXMLDocument($doc, $temp_path, $ide_version);
-    Moz::ProjectXML::DisposeXMLDocument($doc);
-    
-    if (-e $temp_path)
-    {
-        unlink $xml_path;
-        rename ($temp_path, $xml_path);
-    }
-    else
-    {
-        die "Error: Failed to add new targets to XML project\n";
-    }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// ProcessProjectXML
-#// 
-#// Helper routine to allow for XML pre-processing. This should read in the XML, process it,
-#// and replace the original file with the processed version.
-#//--------------------------------------------------------------------------------------------------
-sub ProcessProjectXML($)
-{
-    my($xml_path) = @_;
-  
-    # we need to manually load Moz::ProjectXML, becaues not everyone will have the
-    # required perl modules in their distro.
-    my($cur_dir) = cwd();
-    
-    chdir(dirname($0));     # change to the script dir
-    eval "require Moz::ProjectXML";
-    if ($@) { die "Error: could not do Project XML munging because you do not have the correct XML modules installed. Error is:\n################\n $@################"; }
-    
-    chdir($cur_dir);
-    
-    CreateXMLStaticLibTargets($xml_path);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// Build one project, and make the alias. Parameters are project path, target name, shared  library
-#// name, make shlb alias (boolean), make xSYM alias (boolean), and is component (boolean).
-#//--------------------------------------------------------------------------------------------------
-
-sub BuildOneProjectWithOutput($$$$$$)
-{
-    my ($project_path, $target_name, $output_name, $alias_lib, $alias_xSYM, $component) = @_;
-
-    unless ($project_path =~ m/^$main::BUILD_ROOT.+/) { return; }
-
-    my (@suffix_list) = (".mcp", ".xml");
-    my ($project_name, $project_dir, $suffix) = fileparse($project_path, @suffix_list);
-    if ($suffix eq "") { die "Error: Project, $project_path must end in .xml or .mcp\n"; }
-    
-    my($dist_dir) = GetBinDirectory();
-    
-    # Put libraries in "Essential Files" folder, Components in "Components" folder
-    my($output_dir)  = $component ? "Components:" : "Essential Files:";
-    my($output_path) = $dist_dir.$output_dir;
-
-    if ($main::options{static_build})
-    {      
-      if ($output_name =~ /\.o$/ || $output_name =~ /\.[Ll]ib$/)
-      {
-        $alias_xSYM = 0;
-        $alias_lib  = 1;
-        $output_path = $main::DEBUG ? ":mozilla:dist:static_libs_debug:" : ":mozilla:dist:static_libs:";
-      }
-    }
-
-    # if the flag is on to export projects to XML, export and munge them
-    if ($main::EXPORT_PROJECTS && !($project_path =~ /IDL\.mcp$/))
-    {
-        my $xml_out_path = $project_path;
-
-        $xml_out_path =~ s/\.mcp$/\.xml/;
-
-        # only do this if project is newer?
-        if (! -e $xml_out_path)
-        {
-          ExportProjectToXML(full_path_to($project_path), full_path_to($xml_out_path));
-          ProcessProjectXML($xml_out_path);
-        }
-    }
-        
-    # if the flag is set to use XML projects, default to XML if the file 
-    # is present.
-    if ($main::USE_XML_PROJECTS && !($project_path =~ /IDL\.mcp$/))
-    {
-      my $xml_project_path = $project_dir.$project_name.".xml";
-      if (-e $xml_project_path)
-      {
-        $project_path = $xml_project_path;
-        $suffix = ".xml";
-      }
-    }
-    
-    if ($suffix eq ".xml")
-    {
-        my($xml_path) = $project_path;
-        # Prepend an "_" onto the name of the generated project file so it doesn't conflict
-        $project_path = $project_dir . "_" . $project_name . ".mcp";
-        my($project_modtime) = (-e $project_path ? GetFileModDate($project_path) : 0);
-        my($xml_modtime) = (-e $xml_path ? GetFileModDate($xml_path) : 0);
-
-        if ($xml_modtime > $project_modtime)
-        {
-            print("Importing $project_path from $project_name.xml.\n");
-            unlink($project_path);
-            # Might want to delete the "xxx.mcp Data" dir ???
-            ImportXMLProject(full_path_to($xml_path), full_path_to($project_path));
-        }
-    }
-
-
-    if ($main::CLOBBER_LIBS)
-    {
-        unlink "$project_dir$output_name";              # it's OK if these fail
-        unlink "$project_dir$output_name.xSYM";
-    }
-    
-    DoBuildProject($project_path, $target_name, $main::CLOBBER_PROJECTS);
-    
-    $alias_lib  ? MakeAlias("$project_dir$output_name",      "$output_path") : 0;
-    $alias_xSYM ? MakeAlias("$project_dir$output_name.xSYM", "$output_path") : 0;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// For compatiblity with existing scripts, BuildOneProject now just calls
-#// BuildOneProjectWithOutput, with the output name and target name identical.
-#// Note that this routine assumes that the target name and the shared libary name
-#// are the same.
-#//--------------------------------------------------------------------------------------------------
-
-sub BuildOneProject($$$$$)
-{
-    my ($project_path, $target_name, $alias_lib, $alias_xSYM, $component) = @_;
-    
-	BuildOneProjectWithOutput($project_path, $target_name, $target_name,
-							  $alias_lib, $alias_xSYM, $component);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// For compatiblity with existing scripts, BuildProject now just calls
-#// BuildOneProjectWithOutput, with the output name and target name identical.
-#// Note that this routine assumes that the target name and the shared libary name
-#// are the same. No aliases of the output are made.
-#//--------------------------------------------------------------------------------------------------
-
-sub BuildProject($$)
-{
-    my ($project_path, $target_name) = @_;
-    
-	BuildOneProjectWithOutput($project_path, $target_name, $target_name, 0, 0, 0);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// Identical to BuildProject but clobbers the project before building it.
-#//--------------------------------------------------------------------------------------------------
-
-sub BuildProjectClean($$)
-{
-    my ($project_path, $target_name) = @_;
-    my ($save_clobber_flag) = $main::CLOBBER_PROJECTS;
-    $main::CLOBBER_PROJECTS = 1;
-	BuildOneProjectWithOutput($project_path, $target_name, $target_name, 0, 0, 0);
-	$main::CLOBBER_PROJECTS = $save_clobber_flag;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// Make resource aliases for one directory
-#//--------------------------------------------------------------------------------------------------
-
-sub BuildFolderResourceAliases($$)
-{
-    my($src_dir, $dest_dir) = @_;
-        
-    # get a list of all the resource files
-    opendir(SRCDIR, $src_dir) || die("can't open $src_dir");
-    my(@resource_files) = readdir(SRCDIR);
-    closedir(SRCDIR);
-    
-    # make aliases for each one into the dest directory
-    print("Placing aliases to all files from $src_dir in $dest_dir\n");
-    for ( @resource_files )
-    {
-        next if $_ eq "CVS";
-        #print("    Doing $_\n");
-        if (-l $src_dir.$_)
-        {
-            print("     $_ is an alias\n");
-            next;
-        }
-        my($file_name) = $src_dir . $_; 
-        MakeAlias($file_name, $dest_dir);
-    }
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// DelayFor
-#//
-#// Delay for the given number of seconds, allowing the script to be cancelled
-#//--------------------------------------------------------------------------------------------------
-
-sub DelayFor($)
-{
-  my($delay_secs) = @_;
-  
-  STDOUT->autoflush(1);
-  
-  my($end_time) = time() + $delay_secs;
-    
-  my($last_time) = 0;
-  my($cur_time) = time();
-  
-  while ($cur_time < $end_time)
-  {
-    $cur_time = time();
-    if ($cur_time > $last_time)
-    {
-      print ".";
-      $last_time = $cur_time;
-    }
-    
-    WaitNextEvent();
-  }
-
-  print "\n";
-  STDOUT->autoflush(0);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// TimeStart
-#//--------------------------------------------------------------------------------------------------
-sub TimeStart()
-{
-    return time();
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// TimeEnd
-#//--------------------------------------------------------------------------------------------------
-sub TimeEnd($$)
-{
-    use integer;
-    
-    my($start_time, $operation_name) = @_;
-    my($end_time) = time();
-    
-    my($tot_sec) = $end_time - $start_time;
-    
-    my($seconds) = $tot_sec;
-    
-    my($hours) = $seconds / (60 * 60);
-    $seconds -= $hours * (60 * 60);
-    
-    my($minutes) = $seconds / 60;
-    $seconds -= $minutes * 60;
-        
-    print "$operation_name took $hours hours $minutes minutes and $seconds seconds\n";
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// Remove all files from a tree, leaving directories intact (except "CVS").
-#//--------------------------------------------------------------------------------------------------
-
-sub EmptyTree($)
-{
-    my ($root) = @_; 
-    #print "EmptyTree($root)\n";
-    opendir(DIR, $root);
-    my $sub;
-    foreach $sub (readdir(DIR))
-    {
-        my $fullpathname = $root.$sub; # -f, -d only work on full paths
-
-        # Don't call empty tree for the alias of a directory.
-        # -d returns true for the alias of a directory, false for a broken alias)
-
-        if (-d $fullpathname)
-        {
-            if (-l $fullpathname)   # delete aliases
-            {
-                unlink $fullpathname;
-                next;
-            }
-            EmptyTree($fullpathname.":");
-            if ($sub eq "CVS")
-            {
-                #print "rmdir $fullpathname\n";
-                rmdir $fullpathname;
-            }
-        }
-        else
-        {
-            unless (unlink $fullpathname) { die "Failed to delete $fullpathname\n"; }
-        }
-    }
-    closedir(DIR);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// Recurse through a directory hierarchy, looking for MANIFEST files.
-#// Currently unused.
-#//--------------------------------------------------------------------------------------------------
-
-sub ScanForManifestFiles($$$$)
-{
-    my($dir, $theme_root, $theme_name, $dist_dir) = @_;
-
-    opendir(DIR, $dir) or die "Cannot open dir $dir\n";
-    my @files = readdir(DIR);
-    closedir DIR;
-
-    my $file;
-
-    foreach $file (@files)
-    {    
-        my $filepath = $dir.":".$file;
-
-        if (-d $filepath)
-        {
-            # print "Looking for MANIFEST files in $filepath\n";        
-            ScanForManifestFiles($filepath, $theme_root, $theme_name, $dist_dir);
-        }
-        elsif ($file eq "MANIFEST")
-        {
-            # print "Doing manifest file $filepath\n";
-
-            # Get the dest path from the first line of the file
-
-            open(MANIFEST, $filepath) || die "Could not open file $file";
-            # Read in the path if available
-            my($dest_line) = <MANIFEST>;
-            chomp $dest_line;
-            close MANIFEST;
-
-            $dest_line =~ s|^#!dest[\t ]+|| || die "No destination line found in $filepath\n";
-
-            my($dest_path) = $dist_dir."chrome:skins:$theme_name:$dest_line";
-            # print " Destination is $dest_path\n";
-
-            InstallResources($filepath, "$dest_path", 0);
-        }
-    }
-}
-
-
-#-----------------------------------------------
-# SetupBuildLog
-#-----------------------------------------------
-sub SetupBuildLog($$)
-{
-    my($logfile_path, $timestamped_log) = @_;
-    
-    my($logdir) = "";
-    my($logfile) = $logfile_path;
-    
-    if ($logfile_path =~ /(.+?:)([^:]+)$/)       # ? for non-greedy match
-    {
-        $logdir = $1;
-        $logfile = $2;
-        
-        mkpath($logdir);
-    }
-    
-    if ($timestamped_log)
-    {
-        #Use time-stamped names so that you don't clobber your previous log file!
-        my $now = localtime();
-        while ($now =~ s@:@.@) {} # replace all colons by periods
-        OpenErrorLog("${logdir}${now}");
-    }
-    else
-    {
-        OpenErrorLog("${logdir}${logfile}");
-    }
-}
-
-#-----------------------------------------------
-# SetBuildNumber
-#-----------------------------------------------
-sub SetBuildNumber($$)
-{
-    my($build_num_file, $files_to_touch) = @_;
-
-    # Make sure we add the config dir to search, to pick up mozBDate.pm
-    # Need to do this dynamically, because this module can be used before
-    # mozilla/config has been checked out.
-    
-    my ($inc_path) = $0;        # $0 is the path to the parent script
-    $inc_path =~ s/:build:mac:build_scripts:.+$/:config/;
-    push(@INC, $inc_path);
-
-    require mozBDate;
-    
-    mozBDate::UpdateBuildNumber($build_num_file, $main::MOZILLA_OFFICIAL);
-   
-    my($file);
-    foreach $file (@$files_to_touch)
-    {
-        print "Writing build number to $file from ${file}.in\n";
-        mozBDate::SubstituteBuildNumber($file, $build_num_file, "${file}.in");
-    }
-}
-
-#-----------------------------------------------
-# SetTimeBomb
-#-----------------------------------------------
-sub SetTimeBomb($$)		
-{
-  my ($warn_days, $bomb_days) = @_;
-  
-  system("perl :mozilla:config:mac-set-timebomb.pl $warn_days $bomb_days");
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// Regenerate a configuration header file if necessary
-#//--------------------------------------------------------------------------------------------------
-sub UpdateConfigHeader($)
-{
-    my($config_path) = @_;
-    
-    my($config, $oldconfig) = ("", "");
-    my($define, $definevalue, $defines);
-    my($k, $l,);
-
-    foreach $k (keys(%main::options))
-    {
-        if ($main::options{$k})
-        {
-            foreach $l (keys(%{$main::optiondefines{$k}}))
-            {
-                $my::defines{$l} = $main::optiondefines{$k}{$l};
-                print "Setting up my::defines{$l}\n";
-            }
-        }
-    }
-
-    my $config_headerfile = current_directory().$config_path;
-    if (-e $config_headerfile)
-    {
-        open(CONFIG_HEADER, "< $config_headerfile") || die "$config_headerfile: $!\n";
-        my($line);
-        while ($line = <CONFIG_HEADER>)
-        {
-            if ($line =~ m/#define\s+([^\s]*)\s+([^\s]*)\s*\n/)
-            {
-                $define = $1;
-                $definevalue = $2;
-                
-                #canonicalize so that whitespace changes are not significant
-                my $canon_value = "#define " . $define . " " . $definevalue . "\n";
-                $oldconfig .= $canon_value;
-                
-                if (exists ($my::defines{$define}) and ($my::defines{$define} == $definevalue))
-                {
-                    delete $my::defines{$define};
-                    $config .= $canon_value;
-                }
-            }
-        }
-        close(CONFIG_HEADER);
-    }
-
-    if (%my::defines)
-    {
-        foreach $k (keys(%my::defines))
-        {
-            $config .= "#define " . $k . " " . $my::defines{$k} . "\n";
-        }
-    }
-
-    my $file_name = basename($config_headerfile);
-    if (($config ne $oldconfig) || (!-e $config_headerfile))
-    {
-        printf("Writing new configuration header $file_name\n");
-        open(CONFIG_HEADER, "> $config_headerfile") || die "$config_headerfile: $!\n";
-        print(CONFIG_HEADER "/* This file is auto-generated based on build options. Do not edit. */\n");
-        print CONFIG_HEADER ($config);
-        close(CONFIG_HEADER);
-
-        MacPerl::SetFileInfo("CWIE", "TEXT", $config_headerfile);
-    }
-    else
-    {
-        printf("Configuration header $file_name is up-to-date\n");
-    }
-}
-
-
-1;
-

mozilla/build/mac/build_scripts/Moz/CodeWarriorLib.pm

@@ -1,660 +0,0 @@
-#!perl
-package Moz::CodeWarriorLib;
-
-=pod
-
-=head1 NAME
-
-CodeWarriorLib - supply interface to CodeWarrior
-
-=head1 SYNOPSIS
-
-	#!perl
-	use CodeWarriorLib;
-	CodeWarriorLib::activate();
-	$had_errors = CodeWarriorLib::build_project(
-		$project_path, $target_name, $recent_errors_file, $clean_build
-	);
-
-=head1 DESCRIPTION
-
-Replaces the AppleScript library I<CodeWarriorLib>.
-
-=over 4
-
-=cut
-
-use strict;
-
-use Cwd;
-use File::Basename;
-
-use Mac::Types;
-use Mac::Events;
-use Mac::AppleEvents;
-use Mac::AppleEvents::Simple;
-use Mac::Processes;
-use Mac::MoreFiles;
-use Mac::StandardFile;
-
-
-use vars qw($VERSION);
-$VERSION = '1.02';
-
-my($app)  = 'CWIE';
-my($scriptDir) = cwd();         # could use $0 for this
-my($ide_loc_file) = "";
-
-# 0 == don't switch CWIE to front app in do_event(), 1 == do switch
-# note: activate() still switches when called
-$Mac::AppleEvents::Simple::SWITCH = 0;
-# $Mac::AppleEvents::Simple::WARN = 1;
-
-# supply your own path to the source here
-#_test('PowerPudgeIV:mozilla:mozilla:');
-
-# If you want to understand the gobbldeygook that's used to build Apple Events,
-# you should start by reading the AEGizmos documentation.
-
-=pod
-
-=item _get_project($full_path)
-
-A private routine returning a reference to the open project with the given name,
-or else the empty string (when that project is not open)
-
-full_path is a string identifying the project to be built and is of the form, 
-e.g., "HD:ProjectFolder:MyProject.mcp".  It must be supplied.
-
-=cut
-
-sub _get_project ($) {
-	my(
-		$full_path, $candidate_projects
-	) = @_;
-	$candidate_projects = _doc_named(basename($full_path, '*'));
-	if ($candidate_projects) {
-		my($cps) = _get_dobj($candidate_projects);
-		my($num) = AECountItems($cps);
-		if ($num) {  # is a list
-			foreach (1 .. AECountItems($cps)) {
-				my($cp) = AEGetNthDesc($cps, $_);
-				if (lc $full_path eq lc _full_path($cp)) {
-					return($cp);
-				}
-			}
-		} else {     # is only one, not a list
-			if (lc $full_path eq lc _full_path($cps)) {
-				return($cps);
-			}
-		}
-	}
-	return;
-}
-
-=pod
-
-=item build_project
-
-Build a selected target of a project, saving any errors to a file, if supplied.
-	
-full_path is a string identifying the project to be built and is of the form, 
-e.g., "HD:ProjectFolder:MyProject.mcp".  It must be supplied.
-
-If target_name is the empty string, the current target of the selected project 
-will be built, else, target_name should be a string matching a target name in 
-the selected project.
-	
-If error_path is the empty string, errors will not be saved to a file,
-else, error_path should be the full path of a file to save error messages into.
-
-=cut
-
-$CodeWarriorLib::CLOSE_PROJECTS_FIRST = 0; # If true we close then make. If false, make then close.
-my $last_project_built = "";
-my $last_project_was_closed = 0;
-
-sub build_project ($;$$$) {
-	my(
-		$full_path, $target_name, $error_path,
-		$remove_object, $p, $project_was_closed, $had_errors
-	) = @_;
-	_close_errors_window();
-
-	if ($CodeWarriorLib::CLOSE_PROJECTS_FIRST && ($last_project_built ne $full_path))
-	{
-		# If we're in "close first" mode, we don't close if the current project
-		# is the same as the previous one.
-		if ($last_project_was_closed) {
-			$p = _get_project($last_project_built);
-			_close($p);
-		}
-		$last_project_built = $full_path;
-		$last_project_was_closed = 0; # now refers to the new project
-	}
-	$project_was_closed = 0;
-	while (1) {
-		$p = _get_project($full_path);
-		if (!$p) {
-			if ($project_was_closed) {
-				print "### Error - request for project document failed after opening\n";
-				die "### possibly CW Pro 4 bug: be sure to close your Find window\n";
-			}
-			$project_was_closed = 1;
-			$last_project_was_closed = 1;
-			_open_file($full_path);
-		} else {
-			last;
-		}
-	}
-
-	$had_errors = 0;
-	if ($target_name eq '') {
-		if ($remove_object) {_remove_object($p)}
-		_build($p);
-	} else {
-		if ($remove_object) {_remove_object($p, $target_name)}
-		_build($p, $target_name);
-	}
-
-	if ($error_path ne '') {
-		_save_errors_window($error_path);
-	}
-	$had_errors = _close_errors_window();
-
-	if (!$CodeWarriorLib::CLOSE_PROJECTS_FIRST)
-	{
-		if ($project_was_closed) {
-			$p = _get_project($full_path);
-			_close($p);
-		}
-	}
-
-	return($had_errors);
-}
-
-=pod
-
-=item appIsRunning()
-
-=cut
-sub _appIsRunning($)
-{
-	my ($appSignature) = @_;
-	my ($psi);
-	my ($found) = 0;
-	my ($appPSN);
-
-	foreach $psi (values(%Process))
-	{
-		if ($psi->processSignature() eq $appSignature)
-		{
-			$appPSN = $psi->processNumber();
-			$found = 1;
-            last;
-		}
-	}
-	
-	return $found;
-}
-
-=pod
-
-=item appIsFrontmost()
-
-=cut
-sub _appIsFrontmost($)
-{
-	my ($appSignature) = @_;
-	my ($psi);
-	my ($found) = 0;
-	my ($appPSN);
-
-	foreach $psi (values(%Process))
-	{
-		if ($psi->processSignature() eq $appSignature)
-		{
-			$appPSN = $psi->processNumber();
-			$found = 1;
-            last;
-		}
-	}
-	
-	return (GetFrontProcess() == $appPSN);
-}
-
-
-=pod
-
-=item activate()
-
-Launches CodeWarrior and brings it to the front.
-
-Once found, path will be saved in $idepath_file for future reference.
-Edit or delete this file to change the location of the IDE.  If app is
-moved, C<activate()> will prompt for a new location.
-
-First looks for an open CodeWarrior app.  Second, tries to open previously
-saved location in ':idepath.txt'.  Third, tries to find it and allow user
-to choose it with Navigation Services (if present).  Fourth, uses good old
-GUSI routines built-in to MacPerl for a Choose Directory dialog box.
-
-=cut
-
-sub activate ($) {
-
-    $ide_loc_file = $_[0];     # save in global
-        
-	my($filepath, $appath, $psi) = ($ide_loc_file);
-
-	foreach $psi (values(%Process)) {
-		if ($psi->processSignature() eq $app) {
-			$appath = $psi->processAppSpec();
-			_save_appath($filepath, $appath);
-			last;
-		}
-	}
-
-	if (!$appath || !-x $appath) {
-		$appath = _read_appath($filepath);
-	}
-	
-	if (!$appath || ! -x $appath)
-	{
-		# make sure that MacPerl is a front process
-		#ActivateApplication('McPL');
-		MacPerl::Answer("Please locate the CodeWarrior application.", "OK");
-		
-		# prompt user for the file name, and store it
-		my $macFile = StandardGetFile( 0, "APPL");
-		if ( $macFile->sfGood() )
-		{
-			$appath = $macFile->sfFile();
-		}
-		else
-		{
-			die "Operation canceled\n";
-		}
-	
-#		if (eval {require Mac::Navigation}) {
-#			my($options, $nav);
-#			Mac::Navigation->import();
-#			$options = NavGetDefaultDialogOptions();
-#			$options->message('Where is CodeWarrior IDE?');
-#			$options->windowTitle('Find CodeWarrior IDE');
-#			$nav = NavChooseObject($Application{$app}, $options);
-#			die "CodeWarrior IDE not found.\n" if (!$nav || !$nav->file(1));
-#			$appath = $nav->file(1);
-#		} else {
-#			local(*D);
-#			my $cwd = `pwd`;
-#			$appath = _get_folder(
-#                               'Where is the CW IDE folder?',
-#				dirname($Application{$app})
-#			);
-#			die "CodeWarrior IDE not found.\n" if !$appath;
-#			opendir(D, $appath) or die $!;
-#			chdir($appath);
-#			foreach my $file (sort readdir (D)) {
-#				my(@app) = MacPerl::GetFileInfo($file);
-#				if ($app[0] && $app[1] &&
-#					$app[1] eq 'APPL' && $app[0] eq $app
-#				) {
-#					$appath .= $file;
-#					last;
-#				}
-#			}
-#			chomp($cwd);
-#			chdir($cwd);
-#		}
-		_save_appath($filepath, $appath);
-	}
-
-	my($lp) = LaunchParam->new(
-		launchAppSpec => $appath,
-		launchControlFlags => launchContinue() + launchNoFileFlags()
-	);
-	
-	unless (LaunchApplication($lp)) {
-		unlink($filepath);
-		die $^E;
-	}
-	
-	# wait for CodeWarrior to show up in the list of processes
-	while (!_appIsRunning('CWIE'))
-	{
-		WaitNextEvent();
-	}
-
-	# wait for CodeWarrior to come to the front
-	while (!_appIsFrontmost('CWIE'))
-	{
-		WaitNextEvent();
-	}
-}
-
-=pod
-
-=item getCodeWarriorPath()
-
-Returns a file path relative to the CodeWarrior folder
-
-=cut
-
-sub getCodeWarriorPath($)
-{
-    my($subfolder)=@_;
-    
-    my($app_path) = _read_appath($ide_loc_file);
-    if ($app_path eq "") { die "Error: Failed to get CodeWarrior IDE path\n"; }
-    
-    my($codewarrior_root) = $app_path;
-    $codewarrior_root =~ s/[^:]*$//;
-    return ($codewarrior_root . $subfolder);
-}
-
-
-=pod
-
-=item getCodeWarriorIDEName()
-
-Returns the name of the CodeWarrior application
-
-=cut
-
-sub getCodeWarriorIDEName()
-{
-    my($subfolder)=@_;
-
-    my($app_path) = _read_appath($ide_loc_file);
-    if ($app_path eq "") { die "Error: Failed to get CodeWarrior IDE path\n"; }
-
-    my(@codewarrior_path) = split(/:/, $app_path);
-    return pop(@codewarrior_path);
-}
-
-
-=pod
-
-=item quit()
-
-Quits CodeWarrior.
-
-=cut
-
-sub quit() {
-
-	$last_project_built = "";
-	$last_project_was_closed = 0;
-
-	my($evt) = do_event(qw/aevt quit/, $app);
-}
-
-
-sub _build ($;$) {
-	my($evt);
-	if ($_[1]) {
-		my($prm) =
-			q"'----':obj {form:name, want:type(TRGT), seld:TEXT(@), from:" .
-			AEPrint($_[0]) . '}';
-		$evt = do_event(qw/CWIE MAKE/, $app, $prm, $_[1]);
-	} else {
-		my($prm) = q"'----':" . AEPrint($_[0]);
-		$evt = do_event(qw/CWIE MAKE/, $app, $prm);
-	}
-}
-
-sub _remove_object ($;$) {
-	my($evt);
-	if ($_[1]) {
-		my($prm) =
-			q"'----':obj {form:name, want:type(TRGT), seld:TEXT(@), from:" .
-			AEPrint($_[0]) . '}';
-		$evt = do_event(qw/CWIE RMOB/, $app, $prm, $_[1]);
-	} else {
-		my($prm) = q"'----':" . AEPrint($_[0]);
-		$evt = do_event(qw/CWIE RMOB/, $app, $prm);
-	}
-}
-
-sub _open_file ($) {
-	my($prm) =
-		q"'----':obj {form:name, want:type(alis), " .
-		q"seld:TEXT(@), from:'null'()}";
-
-	do_event(qw/aevt odoc/, $app, $prm, $_[0]);
-}
-
-sub import_project ($$) {
-	my($xml_file, $project_path) = @_;
-	
-	my($prm) = "kocl:type(PRJD), rtyp:TEXT(@), data:TEXT(@), &subj:'null'()";
-	
-	my($evt) = do_event(qw/core crel/, $app, $prm, $project_path, $xml_file);    
-	my($result) = _get_event_result($evt);
-	
-	if ($result eq "") {
-		_close(_get_project($project_path));
-	}
-	return $result;
-}
-
-sub export_project ($$) {
-	my($project_path, $xml_out_path) = @_;
-	my($p, $project_was_closed);
-	
-	$project_was_closed = 0;
-	while (1) {
-		$p = _get_project($project_path);
-		if (!$p) {
-			if ($project_was_closed) {
-				print "### Error - request for project document failed after opening\n";
-				die "### possibly CW bug: be sure to close your Find window\n";
-}
-			$project_was_closed = 1;
-			_open_file($project_path);
-		} else {
-			last;
-		}
-	}
-
-    # avoid problems with the Project Messages window
-    _close_named_window("Project Messages");
-    
-	my($prm) =
-		q"'----':obj {form:indx, want:type(PRJD), " .
-		q"seld:1, from:'null'()}, kfil:TEXT(@)";
-
-	my($evt) = do_event(qw/CWIE EXPT/, $app, $prm, $xml_out_path);    
-	
-	if ($project_was_closed) {
-		$p = _get_project($project_path);
-		_close($p);
-	}
-	
-	return _get_event_result($evt);
-}
-
-sub _doc_named ($) {
-	my($prm) =
-		q"'----':obj {form:test, want:type(docu), from:'null'(), " .
-		q"seld:cmpd{relo:'=   ', 'obj1':obj {form:prop, want:type" .
-		q"(prop), seld:type(pnam), from:'exmn'()}, 'obj2':TEXT(@)}}";
-
-	my($evt) = do_event(qw/core getd/, $app, $prm, $_[0]);
-	return($evt->{REPLY} eq 'aevt\ansr{}' ? undef : $evt);
-}
-
-sub _full_path ($) {
-	my($obj) = $_[0];
-	my($prm) =
-		q"'----':obj {form:prop, want:type(prop), seld:type(FILE), " .
-		q"from:" . AEPrint($_[0]) . q"}, rtyp:type(TEXT)";
-	my($evt) = do_event(qw/core getd/, $app, $prm);
-
-	return MacPerl::MakePath(
-		MacUnpack('fss ', (
-			AEGetParamDesc($evt->{REP}, keyDirectObject()))->data()->get()
-		)
-	);
-}
-
-sub _save_errors_window ($) {
-	my($prm) = 
-		q"'----':obj {form:name, want:type(alis), seld:TEXT(@), from:'null'()}";
-	do_event(qw/MMPR SvMs/, $app, $prm, $_[0]);
-}
-
-
-sub _close_errors_window () {
-    return _close_named_window('Errors & Warnings');
-}
-
-
-sub _close_named_window ($) {
-    my($window_name) = @_;
-    
-	my($prm) =
-		q"'----':obj {form:name, want:type(cwin), " .
-		q"seld:TEXT(@), from:'null'()}";
-
-	my($evt) = do_event(qw/core clos/, $app, $prm, $window_name);
-	return($evt->{REPLY} eq 'aevt\ansr{}' ? 1 : 0);
-}
-
-sub _close () {
-	my($prm) = q"'----':" . AEPrint($_[0]);
-	do_event(qw/core clos/, $app, $prm);
-}
-
-sub _get_dobj ($) {
-	return(AEGetParamDesc($_[0]->{REP}, keyDirectObject()));
-}
-
-sub _get_folder ($$) {
-    require 'GUSI.ph';
-    my($prompt, $default) = @_;
-    MacPerl::Choose(
-        GUSI::AF_FILE(), 0, $prompt, '',
-        GUSI::CHOOSE_DIR() + ($default ? &GUSI::CHOOSE_DEFAULT : 0),
-        $default
-    );
-}
-
-sub _get_event_result ($)
-{
-    my($evt) = @_;
-
-    my($result) = $evt->{ERROR};
-    
-    if ( $result eq "" && $evt->{ERRNO} != 0 )
-    {
-        $result = "unknown error (".$evt->{ERRNO}.")";
-    }
-    
-    return $result;
-}
-
-
-sub _save_appath ($$) {
-
-	my($cwd) = cwd();	# remember the current working dir
-	chdir($scriptDir);	# change dir to the script dir
-
-	local(*F);
-	open(F, '>' . $_[0]) or die $!;
-	print F $_[1];
-	close(F);
-		
-	chdir($cwd);		# restore the cwd
-}
-
-sub _read_appath ($) {
-
-	my($filepath) = @_;
-
-	my($cwd) = cwd();	# remember the current working dir
-	chdir($scriptDir);	# change dir to the script dir
-	
-	if (! -e $filepath) {
-		return "";
-	}
-
-	local(*F);
-	open(F, $filepath);
-	my($appath) = <F>;
-	close(F);
-		
-	chdir($cwd);		# restore the cwd
-	return($appath);
-}
-
-
-sub _test ($) {
-	activate($ide_loc_file);
-	my($path) = $_[0];
-	build_project(
-	  "${path}modules:xml:macbuild:XML.mcp", '',
-	  "${path}build:mac:Mozilla.BuildLog.part"
-	);
-}
-
-1;
-
-=pod
-
-=back
-
-=head1 HISTORY
-
-=over 4
-
-=item v1.02, September 23, 1998
-
-Made fixes in finding and saving location of CodeWarrior IDE.
-
-=item v1.01, June 1, 1998
-
-Made fixes to C<chdir()> in C<activate()>, made C<activate()> more robust 
-in finding CodeWarrior IDE, added global variable to NOT switch to IDE
-for each sent event, a few other fixes.
-
-=item v1.00, May 30, 1998
-
-First shot
-
-=back
-
-
-=head1 AUTHORS
-
-Chris Nandor F<E<lt>pudge@pobox.comE<gt>>, and the author of the
-original I<CodeWarriorLib>, Scott Collins F<E<lt>scc@netscape.comE<gt>>.
-
-=head1 SEE ALSO
-
-BuildProject L<Moz>.
-
-=head1 COPYRIGHT
-
-The contents of this file are subject to the Netscape Public
-License Version 1.1 (the "License"); you may not use this file
-except in compliance with the License. You may obtain a copy of
-the License at http://www.mozilla.org/NPL/
-
-Software distributed under the License is distributed on an "AS
-IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-implied. See the License for the specific language governing
-rights and limitations under the License.
-
-The Original Code is Mozilla Communicator client code, released
-March 31, 1998.
-
-The Initial Developer of the Original Code is Netscape
-Communications Corporation. Portions created by Netscape are
-Copyright (C) 1998-1999 Netscape Communications Corporation. All
-Rights Reserved.
-
-Contributor(s): 
-
-=cut

mozilla/build/mac/build_scripts/Moz/Jar.pm

@@ -1,576 +0,0 @@
-#!perl -w
-package Moz::Jar;
-
-#
-# Module for creating jar files, either using a jar manifest, or
-# simply jarring up folders on disk.
-#
-
-require 5.004;
-require Exporter;
-
-use strict;
-use Archive::Zip;
-use File::Path;
-
-use Mac::Files;
-
-use Moz::Moz;
-
-use vars qw( @ISA @EXPORT );
-
-@ISA        = qw(Exporter);
-@EXPORT     = qw(
-                    CreateJarFileFromDirectory
-                    CreateJarFromManifest
-                    WriteOutJarFiles
-                    SanityCheckJarOptions
-                );
-
-
-#-------------------------------------------------------------------------------
-# Add the contents of a directory to the zip file
-#
-#-------------------------------------------------------------------------------
-sub _addDirToJar($$$$)
-{
-    my($dir, $jar_root, $zip, $compress) = @_;
-
-    opendir(DIR, $dir) or die "Error: Cannot open dir $dir\n";
-    my @files = readdir(DIR);
-    closedir DIR;
-    
-    my $unix_jar_root = $jar_root;
-    $unix_jar_root =~ s|:|/|g;       # colon to slash conversion
-    
-    my $file;
-    
-    foreach $file (@files)
-    {        
-        my $filepath = $dir.":".$file;
-        
-        if (-d $filepath)
-        {
-            print "Adding files to jar from $filepath\n";            
-            _addDirToJar($filepath, $jar_root, $zip, $compress);
-        }
-        else
-        {
-            my $member = Archive::Zip::Member->newFromFile($filepath);
-            die "Error: Failed to create zip file member $filepath\n" unless $member;
-            
-            my $unixName = $filepath;
-            $unixName =~ s|:|/|g;               # colon to slash conversion
-            $unixName =~ s|^$unix_jar_root||;   # relativise
-            
-            $member->fileName($unixName);
-            
-            # print "Adding $file as $unixName\n";
-            
-            if ($compress) {
-                $member->desiredCompressionMethod(Archive::Zip::COMPRESSION_DEFLATED);            
-            } else {
-                $member->desiredCompressionMethod(Archive::Zip::COMPRESSION_STORED);
-            }
-            
-            $zip->addMember($member);
-        }
-    }
-}
-
-#-------------------------------------------------------------------------------
-# Add the contents of a directory to the zip file
-#
-#-------------------------------------------------------------------------------
-
-sub CreateJarFileFromDirectory($$$)
-{
-    my($srcdir, $jarpath, $compress) = @_;
-
-    my $zip = Archive::Zip->new();
-
-    _addDirToJar($srcdir, $srcdir, $zip, $compress);
-
-    print "Saving zip file...\n";
-    my $status = $zip->writeToFileNamed($jarpath);
-    if ($status == 0) {
-        print "Zipping completed successfully\n";
-    } else {
-        print "Error saving zip file\n";
-    }
-    
-    # set the file type/creator to something reasonable
-    MacPerl::SetFileInfo("ZIP ", "ZIP ", $jarpath);
-}
-
-
-#-------------------------------------------------------------------------------
-# printZipContents
-# 
-#-------------------------------------------------------------------------------
-sub printZipContents($)
-{
-    my($zip) = @_;
-
-    my(@members) = $zip->memberNames();
-    
-    print "Zip contains:\n";
-    
-    my($member);
-    foreach $member (@members)
-    {
-        print "  $member\n";
-    }
-}
-
-
-#-------------------------------------------------------------------------------
-# safeSaveJarFile
-# 
-# Archive::Zip has a problem where you cannot save a zip file on top of
-# an existing zip file that it has open, because it holds references
-# into that zip. So we have to save to a temp file, then do a swap.
-# 
-# Note that the zip will become invalid after this operation.
-# If you want to do further operations on it, you'll have to reread it.
-#-------------------------------------------------------------------------------
-sub safeSaveJarFile($$)
-{
-    my($zip, $full_dest_path) = @_;
-    
-    my($temp_file_name) = $full_dest_path."_temp";
-
-    ($zip->writeToFileNamed($temp_file_name) == Archive::Zip::AZ_OK) || die "Error: died writing jar to temp file $temp_file_name\n";
-    
-    unlink $full_dest_path;
-    
-    (rename $temp_file_name, $full_dest_path) || die "Error: Failed to rename $temp_file_name\n";
-    
-    MacPerl::SetFileInfo("ZIP ", "ZIP ", $full_dest_path);
-}
-
-
-#-------------------------------------------------------------------------------
-# addToJarFile
-# 
-# Add a file to a jar file
-#
-# Parameters:
-#   1. Jar ID. Unix path of jar file inside chrome.
-#   2. Abs path to jar.mn file (i.e. source)    (mac breaks)
-#   3. File source, relative to jar.mn path     (mac breaks)
-#   4. Abs path to the resulting .jar file      (mac breaks)
-#   5. Relative file path within the jar        (unix breaks)
-#   6. Reference to hash of jar files
-#
-#-------------------------------------------------------------------------------
-
-sub addToJarFile($$$$$$$)
-{
-    my($jar_id, $jar_man_dir, $file_src, $jar_path, $file_jar_path, $override, $jars) = @_;
-
-    # print "addToJarFile with:\n  $jar_man_dir\n  $file_src\n  $jar_path\n  $file_jar_path\n";
-
-    unless ($jar_path =~ m/(.+:)([^:]+)$/) { die "Error: Bad jar path $jar_path\n"; }
-    
-    my($target_dir) = $1;
-    my($jar_name) = $2;
-
-    $target_dir =~ s/[^:]+$//;
-    
-    # print "¥ $target_dir $jar_name\n";
-
-    # find the source file
-    my($src) = $jar_man_dir.":".$file_src;
-    if ((!-e $src) && ($file_src =~ m/.+:([^:]+)$/))    # src does not exist. Fall back to looking for src in jar.mn dir
-    {
-        $file_src = $1;
-        $src = $jar_man_dir.":".$file_src;
-        
-        if (!-e $src) {
-            die "Error: Can't find chrome file $src\n";
-        }
-    }
-    
-    if ($main::options{chrome_jars})
-    {
-        my($zip) = $jars->{$jar_id};
-        unless ($zip) { die "Error: Can't find Zip entry for $jar_id\n"; }
-        
-        # print "Adding $file_src to jar file $jar_path at $file_jar_path\n";
-        my($member) = Archive::Zip::Member->newFromFile($src);
-        unless ($member) { die "Error: Failed to create zip file member $src\n"; }
-
-        $member->fileName($file_jar_path);    
-    
-        my($compress) = 1;
-        if ($compress) {
-            $member->desiredCompressionMethod(Archive::Zip::COMPRESSION_DEFLATED);            
-            $member->desiredCompressionLevel(Archive::Zip::COMPRESSION_LEVEL_DEFAULT);   # defaults to 6
-        } else {
-            $member->desiredCompressionMethod(Archive::Zip::COMPRESSION_STORED);
-        }
-
-        my($old_member) = $zip->memberNamed($file_jar_path);
-        
-        if ($override)
-        {
-            if ($old_member)
-            {
-                # print "Overriding $file_jar_path in jar file $jar_id\n";
-                # need to compare mod dates or use the + here
-                $zip->removeMember($old_member);
-            }
-        
-            $zip->addMember($member);
-        }
-        else
-        {
-            if ($old_member)
-            {
-                #compare dates here
-                my($member_moddate) = $old_member->lastModTime();
-                my($file_moddate) = GetFileModDate($src);
-            
-                if ($file_moddate > $member_moddate)
-                {
-                    print "Updating older file $file_jar_path in $jar_id\n";
-                    $zip->removeMember($old_member);
-                    $zip->addMember($member);
-                }
-                else
-                {
-                    print "File $file_jar_path in $jar_id is more recent. Not updating.\n";
-                }
-            }
-            else
-            {
-                $zip->addMember($member);
-            }
-        }
-    }
-    
-    if ($main::options{chrome_files})  # we install raw files too
-    {
-        my($rel_path) = $file_jar_path;
-        $rel_path =~ s|/|:|g;       # slash to colons
-        
-        my($dir_name) = $jar_name;
-        $dir_name =~ s/\.jar$//;
-        
-        my($dst) = $target_dir.$dir_name.":".$rel_path;
-                
-        # print "Aliassing $src\n to\n$dst\n";        
-        if ($override)
-        {
-            unlink $dst;
-        MakeAlias($src, $dst);      # don't check errors, otherwise we fail on replacement
-    }
-        else
-        {
-            if (-e $dst)
-            {
-                #compare dates here
-                my($dst_moddate) = GetFileModDate($dst);
-                my($file_moddate) = GetFileModDate($src);
-            
-                if ($file_moddate > $dst_moddate)
-                {
-                    print "Updating older file $rel_path in $dir_name\n";
-                    unlink $dst;
-                    MakeAlias($src, $dst);
-                }
-                else
-                {
-                    print "File $file_jar_path in $jar_id is more recent. Not updating.\n";
-                }
-            
-            }
-            else
-            {
-                MakeAlias($src, $dst);
-            }
-        }
-        
-    }
-}
-
-
-#-------------------------------------------------------------------------------
-# setupJarFile
-# 
-# setup a zip for writing
-#-------------------------------------------------------------------------------
-
-sub setupJarFile($$$)
-{
-    my($jar_id, $dest_path, $jar_hash) = @_;
-
-    # print "Creating jar file $jar_id at $jar_path\n";
-    
-    my($jar_file) = $jar_id;
-    $jar_file =~ s|/|:|g;           # slash to colons
-    my($full_jar_path) = full_path_to($dest_path.":".$jar_file);
-
-    if ($main::options{chrome_jars})
-    {
-        my($zip) = $jar_hash->{$jar_id};
-        if (!$zip)      # if we haven't made it already, do so
-        {
-	        my($zip) = Archive::Zip->new();
-	        $jar_hash->{$jar_id} = $zip;
-
-            # does the jar file exist already? If so, read it in
-            if (-e $full_jar_path)
-            {
-                print "Reading in jar file $jar_id\n";
-                if ($zip->read($full_jar_path) != Archive::Zip::AZ_OK) { die "Error: Failed to re-read $full_jar_path\n"; }
-                
-                # printZipContents($zip);
-            }
-
-        }
-    }
-    else
-    {
-        # installing files.
-        # nothing to do. MakeAlias creates dirs as needed.
-
-	    # add this jar to the list
-	    $jar_hash->{$jar_id} = 1;
-    }
-}
-
-
-#-------------------------------------------------------------------------------
-# closeJarFile
-# 
-# We're done with this jar file _for this jar.mn_. We may add more entries
-# to it later, so keep it open in the hash.
-#-------------------------------------------------------------------------------
-sub closeJarFile($$)
-{
-    my($jar_path, $jar_hash) = @_;
-
-    # print "Closing jar file $jar_path\n";
-
-    if ($main::options{chrome_jars})
-    {
-    
-    }
-    else
-    {
-        # installing files.
-        # nothing to do
-    }
-}
-
-
-#-------------------------------------------------------------------------------
-# WriteOutJarFiles
-# 
-# Now we dump out the jars
-#-------------------------------------------------------------------------------
-sub WriteOutJarFiles($$)
-{
-    my($chrome_dir, $jars) = @_;
-
-    unless ($main::options{chrome_jars}) { return; }
-    
-    my($full_chrome_path) = full_path_to($chrome_dir);
-
-    my($key);
-    foreach $key (keys %$jars)
-    {
-        my($zip) = $jars->{$key};
-        
-        my($rel_path) = $key;
-        $rel_path =~ s/\//:/g;
-        
-        my($output_path) = $full_chrome_path.":".$rel_path;
-        
-        print "Writing zip file $key to $output_path\n";
-
-        # ensure the target dirs exist
-        my($path) = $output_path;
-        $path =~ s/[^:]+$//;
-        mkpath($path);
-        
-        # unlink $output_path;        # remove any existing jar
-        safeSaveJarFile($zip, $output_path);
-        # $zip is invalid after this operation, so nuke it here
-        $jars->{$key} = 0;
-    }
-}
-
-
-#-------------------------------------------------------------------------------
-# registerChromePackage
-# 
-# Enter a chrome package into the installed-chrome.txt file
-#-------------------------------------------------------------------------------
-sub registerChromePackage($$$$$$)
-{
-    my($jar_file, $file_path, $chrome_dir, $jar_hash, $chrome_type, $pkg_name) = @_;
-
-    my($manifest_subdir) = $jar_file;
-    $manifest_subdir =~ s/:/\//g;
-    
-    if (index($manifest_subdir, "-unix") == -1 && index($manifest_subdir, "-win") == -1) {
-
-    my($chrome_entry);
-    
-    if ($main::options{use_jars}) {
-        $chrome_entry = "$chrome_type,install,url,jar:resource:/chrome/$manifest_subdir!/$chrome_type/$pkg_name";
-    } else {
-        $manifest_subdir =~ s/\.jar$//;
-        $chrome_entry = "$chrome_type,install,url,resource:/chrome/$manifest_subdir/$chrome_type/$pkg_name";
-    }
-
-    # print "Entering $chrome_entry in installed-chrome.txt\n";
-    
-    # ensure chrome_dir exists
-    mkpath($chrome_dir);
-    
-    my($inst_chrome) = ${chrome_dir}.":installed-chrome.txt";
-    
-    if (open(CHROMEFILE, "<$inst_chrome")) {
-        while (<CHROMEFILE>) {
-            chomp;
-            if ($_ eq $chrome_entry) {
-                # $chrome_entry already appears in installed-chrome.txt file
-                # just update the mod date
-                my $now = time;
-                utime($now, $now, $inst_chrome) || die "Error: Couldn't touch $inst_chrome";
-                print "+++ updating chrome $inst_chrome\n+++\t\t$chrome_entry\n";
-                close(CHROMEFILE) || die "Error: can't close $inst_chrome: $!";
-                return 0;
-            }
-        }
-        close(CHROMEFILE) || die "Error: can't close $inst_chrome: $!";
-    }
-    open(CHROMEFILE, ">>${inst_chrome}") || die "Error: Failed to open $inst_chrome\n";
-    print(CHROMEFILE "${chrome_entry}\n");
-    close(CHROMEFILE) || die "Error: Failed to close $inst_chrome\n";
-    print "+++ adding chrome $inst_chrome\n+++\t\t$chrome_entry\n";
-  }
-}
-
-#-------------------------------------------------------------------------------
-# Create or add to a jar file from a jar.mn file.
-# Both arguments are relative to the mozilla root dir.
-#
-#
-#-------------------------------------------------------------------------------
-sub CreateJarFromManifest($$$)
-{
-    my($jar_man_path, $dest_path, $jars) = @_;
-    
-    if ($main::options{chrome_jars}) {
-        print "Jarring from $jar_man_path\n";
-    }
-    if ($main::options{chrome_files}) {
-        print "Installing files from $jar_man_path\n";
-    }
-
-    $jar_man_path = full_path_to($jar_man_path);
-    $dest_path = full_path_to($dest_path);
-
-    # if the jars hash is empty, nuke installed-chrome.txt
-    if (! scalar(%$jars))
-    {
-        print "Nuking installed-chrome.txt\n";
-	    my($installed_chrome) = $dest_path.":installed-chrome.txt";
-	    # unlink $installed_chrome;
-    }
-    
-    my $jar_man_dir = "";
-    my $jar_man_file = "";
-    
-    if ($jar_man_path =~ /(.+):([^:]+)$/)
-    {
-        $jar_man_dir = $1;      # no trailing :
-        $jar_man_file = $2;
-    }
-
-    # Keep a hash of jar files, keyed on relative jar path (e.g. "packages/core.jar")
-    # Entries are open Archive::Zips (if zipping), and installed-chrome entries.
-    
-    my($jar_id) = "";       # Current foo/bar.jar from jar.mn file
-    my($jar_file) = "";     # relative path to jar file (from $dest_path), with mac separators
-    my($full_jar_path);
-    
-    open(FILE, "<$jar_man_path") || die "Error: could not open \"$jar_man_path\": $!";
-    while (<FILE>)
-    {
-        my($line) = $_;
-        chomp($line);
-        
-        # print "$line\n";
-        
-        if ($line =~ /^\s*\#.*$/) {     # skip comments
-            next;
-        }
-        
-        if ($line =~/^([\w\d.\-\_\\\/]+)\:\s*$/)                                  # line start jar file entries
-        {
-            $jar_id = $1;
-            $jar_file = $jar_id;
-            $jar_file =~ s|/|:|g;           # slash to colons
-            $full_jar_path = $dest_path.":".$jar_file;
-                        
-            setupJarFile($jar_id, $dest_path, $jars);
-
-        }
-        elsif ($line =~ /^(\+?)\s+([\w\d.\-\_\\\/]+)\s*(\([\w\d.\-\_\\\/]+\))?$\s*/)     # jar file entry
-        {
-            my($override) = ($1 eq "+");
-            my($file_dest) = $2;
-            my($file_src) = $3;
- 
-            if ($file_src) {  
-                $file_src = substr($file_src, 1, -1);      #strip the ()
-            } else {
-                $file_src = $file_dest;
-            }
-            
-            $file_src =~ s|/|:|g;
-            
-            if ($jar_file ne "")    # if jar is open, add to jar
-            {
-                if ($file_dest =~ /([\w\d.\-\_]+)\/([\w\d.\-\_\\\/]+)contents.rdf/)
-                {
-                    my $chrome_type = $1;
-                    my $pkg_name = $2;
-                    registerChromePackage($jar_file, $file_dest, $dest_path, $jars, $chrome_type, $pkg_name);
-                }
-                
-                addToJarFile($jar_id, $jar_man_dir, $file_src, $full_jar_path, $file_dest, $override, $jars);
-            }
-            else
-            {
-                die "Error: bad jar.mn format at $line\n";
-            }
-        }
-        elsif ($line =~ /^\s*$/ )                                               # blank line
-        {
-            if ($jar_file ne "")    #if a jar file is open, close it
-            {
-                closeJarFile($full_jar_path, $jars);
-                
-                $jar_file = "";
-                $full_jar_path = "";
-            }
-        }
-    }
-    
-    close(FILE);
-
-    if ($jar_file ne "")    #if a jar file is open, close it
-    {
-        closeJarFile($full_jar_path, $jars);
-    }
-
-}
-
-1;

mozilla/build/mac/build_scripts/Moz/MacCVS.pm

@@ -1,228 +0,0 @@
-#!perl -w
-package Moz::MacCVS;
-
-# package Mac::Apps::MacCVS; this should really be the name of the package
-# but due to our directory hierarchy in mozilla, I am not doing it
-
-require 5.004;
-require Exporter;
-
-use strict;
-use Exporter;
-
-use vars qw($VERSION @ISA @EXPORT);
-
-use Cwd;
-
-use File::Basename;
-
-use Mac::StandardFile;
-use Mac::AppleEvents;
-use Mac::AppleEvents::Simple;
-
-@ISA        = qw(Exporter);
-@EXPORT     = qw(new describe checkout update);
-$VERSION = "1.00";
-
-# If you want to understand the gobbldeygook that's used to build Apple Events,
-# you should start by reading the AEGizmos documentation.
-
-
-# Architecture:
-# cvs session object:
-# name - session name
-# session_file - session file
-# 
-# 
-
-my($last_error) = 0;
-my($gAppSig)    = 'Mcvs';   # MacCVS Pro
-
-#
-# utility routines
-#
-
-
-sub _checkForEventError($)
-{
-  my($evt) = @_;
-
-  if ($evt->{ERRNO} != 0)
-  {
-    print STDERR "Error. Script returned '$evt->{ERROR} (error $evt->{ERRNO})\n";
-    $last_error = $evt->{ERRNO};
-    return 0;
-  }
-  
-  return 1; # success
-}
-
-
-#
-# Session object methods
-#
-
-sub new
-{
-  my ( $proto, $session_file) = @_;
-  my $class = ref($proto) || $proto;
-  my $self = {};
-
-  if ( defined($session_file) && ( -e $session_file) )
-  {
-    $self->{"name"} = basename( $session_file );
-    $self->{"session_file"} = $session_file;
-    bless $self, $class;
-    return $self;
-  }
-  else
-  {
-    print STDERR "MacCVS->new cvs file < $session_file > does not exist\n";
-    return;
-  }
-}
-
-# makes sure that the session is open
-# assertSessionOpen()
-# returns 1 on success
-sub assertSessionOpen()
-{
-  my ($self) = shift;
-
-  $last_error = 0;
-
-  my($prm) =
-    q"'----':obj {form:name, want:type(alis), seld:TEXT(@), from:'null'()}";
-
-  my($evt) = do_event(qw/aevt odoc/, $gAppSig, $prm, $self->{session_file});
-  return _checkForEventError($evt);
-}
-
-# prints the cvs object, used mostly for debugging
-sub describe
-{
-  my($self) = shift;
-  $last_error = 0;
-  print "MacCVS:: name: ", $self->{name}, " session file: ", $self->{session_file}, "\n";
-}
-
-# checkout( self, module, revision, date)
-# MacCVS checkout command
-# returns 1 on success.
-sub checkout()
-{
-  my($self, $module, $revision, $date ) = @_;
-  unless( defined ($module) ) { $module = ""; } # get rid of the pesky undefined warnings
-  unless( defined ($revision) ) { $revision = ""; }
-  unless( defined ($date) ) { $date = ""; }
-
-  $last_error = 0;
-    
-  $self->assertSessionOpen() || die "Error: failed to open MacCVS session file at $self->{session_file}\n";
-  
-  my($revstring) = ($revision ne "") ? $revision : "(none)";
-  my($datestring) = ($date ne "") ? $date : "(none)";
-  
-  print "Checking out $module with revision $revstring, date $datestring\n";
-
-  my($prm) =
-    q"'----':obj {form:name, want:type(docu), seld:TEXT(@), from:'null'()}, ".
-    q"modl:'TEXT'(@), tagr:'TEXT'(@), tagd:'TEXT'(@) ";
-  
-  my($evt) = do_event(qw/MCvs cout/, $gAppSig, $prm, $self->{name}, $module, $revision, $date);
-  return _checkForEventError($evt);
-}
-
-
-# update( self, branch tag, list of paths)
-# MacCVS udate command
-# returns 1 on success.
-# NOTE: MacCVS Pro does not correctly support this stuff yet (as of version 2.7d5).
-sub update()
-{
-  my($self, $branch, $paths ) = @_;
-
-  $last_error = 0;
-    
-  $self->assertSessionOpen() || die "Error: failed to open MacCVS session file at $self->{session_file}\n";
-
-  if ($branch eq "HEAD") {
-    $branch = "";
-  }
-  
-  my($paths_list) = "";
-  
-  my($path);
-  foreach $path (@$paths)
-  {
-    if ($paths_list ne "") {
-      $paths_list = $paths_list.", ";
-    }
-    
-    $paths_list = $paths_list."Ò".$path."Ó";
-  }
-    
-  my($prm) =
-    q"'----':obj {form:name, want:type(docu), seld:TEXT(@), from:'null'()}, ".
-    q"tagr:'TEXT'(@), tFls:[";
-
-  $prm = $prm.$paths_list."]";
-    
-  my($evt) = do_event(qw/MCvs updt/, $gAppSig, $prm, $self->{name}, $branch);
-  return _checkForEventError($evt);
-};
-
-
-sub getLastError()
-{
-  return $last_error;
-}
-
-1;
-=pod
-
-=head1 NAME
-
-MacCVS - Interface to MacCVS
-
-=head1 SYNOPSIS
-
-  use MacCVS;
-  $session = MacCVS->new( <session_file_path>) || die "cannot create session";
-  $session->checkout([module] [revision] [date]) || die "Could not check out";
-    
-=head1 DESCRIPTION
-
-This is a MacCVS interface for talking to MacCVS Pro client.
-MacCVSSession is the class used to manipulate the session
-
-=item new
-  MacCVS->new( <cvs session file path>);
-  
-  Creates a new session. Returns undef on failure.
-
-=item checkout( <module> [revision] [date] )
-
-  cvs checkout command. Revision and date are optional
-  returns 0 on failure
-  
-=cut
-
-=head1 SEE ALSO
-
-=over
-
-=item MacCVS Home Page
-
-http://www.maccvs.org/
-
-=back 
-
-=head1 AUTHORS
-
-Aleks Totic atotic@netscape.com
-Simon Fraser sfraser@netscape.com
-
-=cut
-
-__END__

mozilla/build/mac/build_scripts/Moz/Moz.pm

@@ -1,603 +0,0 @@
-=head1 NAME
-
-B<Moz> - routines for automating CodeWarrior builds, and some extra-curricular
-activities related to building Mozilla
-
-=head1 SYNOPSIS
-
-    use Moz;
-
-    OpenErrorLog(":::BuildLog");
-    StopForErrors();
-
-		$Moz::QUIET = 1;
-		InstallFromManifest(":projects:MANIFEST", $dist_dir);
-
-    BuildProjectClean(":projects:SomeProject.mcp", "SomeTarget");
-    MakeAlias(":projects:SomeProject.shlb", $dist_dir);
-
-    DontStopForErrors();
-
-    BuildProject(":projects:SomeOtherProject.mcp", "SomeTarget");
-
-=head1 DESCRIPTION
-
-B<Moz> comprises the routines needed to slap CodeWarrior around, force it
-to build a sequence of projects, report the results, and a few other things.
-This module should only contain functions that are generic to any build,
-not just the Mozilla build.
-
-=cut
-
-
-package			Moz::Moz;
-require			Exporter;
-
-use Cwd;
-
-use File::Copy;
-use File::Path;
-use File::Basename;
-
-use Mac::Types;
-use Mac::Events;
-use Mac::Processes;
-
-use ExtUtils::Manifest 'maniread';
-
-use Moz::CodeWarriorLib;
-
-@ISA				= qw(Exporter);
-
-@EXPORT			= qw( LaunchCodeWarrior
-                  GetCodeWarriorRelativePath
-                  current_directory
-                  full_path_to
-                  DoBuildProject
-                  ImportXMLProject
-                  ExportProjectToXML
-                  OpenErrorLog
-                  MakeAlias
-                  GetFileModDate
-                  StopForErrors
-                  DontStopForErrors
-                  InstallFromManifest
-                  InstallResources
-                  RedirectOutputToFile
-                  Delay
-                  ActivateApplication
-                  IsProcessRunning);
-
-@EXPORT_OK	= qw(CloseErrorLog QUIET);
-
-
-sub current_directory()
-	{
-		my $current_directory = cwd();
-		chop($current_directory) if ( $current_directory =~ m/:$/ );
-		return $current_directory;
-	}
-
-sub full_path_to($)
-	{
-		my ($path) = @_;
-		if ( $path =~ m/^[^:]+$/ )
-			{
-				$path = ":" . $path;
-			}
-
-		if ( $path =~ m/^:/ )
-			{
-				$path = current_directory() . $path;
-			}
-
-		return $path;
-	}
-
-$logging								= 0;
-$recent_errors_file			= "";
-$stop_on_1st_error			= 1;
-$QUIET									= 0;
-
-
-
-=head2 Logging all the errors and warnings - C<OpenErrorLog($log_file)>, C<CloseErrorLog()>
-
-The warnings and errors generated in the course of building projects can be logged to a file.
-Tinderbox uses this facility to show why a remote build failed.
-
-Logging is off by default.
-  Start logging at any point in your build process with C<OpenErrorLog($log_file)>.
-  Stop with C<CloseErrorLog()>.
-  You never need to close the log explicitly, unless you want to just log a couple of projects in the middle of a big list.
-  C<CloseErrorLog()> is not exported by default. 
-
-=cut
-
-sub CloseErrorLog()
-	{
-		if ( $logging )
-			{
-				close(ERROR_LOG);
-				$logging = 0;
-				StopForErrors() if $stop_on_1st_error;
-			}
-	}
-
-
-
-sub OpenErrorLog($)
-	{
-		my ($log_file) = @_;
-
-		CloseErrorLog();
-		if ( $log_file )
-			{
-				$log_file = full_path_to($log_file);
- 
-				open(ERROR_LOG, ">$log_file") || die "Error: Can't open $log_file\n";
-				MacPerl::SetFileInfo("CWIE", "TEXT", $log_file);
-
-				$log_file =~ m/.+:(.+)/;
-				$recent_errors_file = full_path_to("$1.part");
-				$logging = 1;
-			}
-	}
-
-
-=head2 Stopping before it's too late - C<StopForErrors()>, C<DontStopForErrors()>
-
-When building a long list of projects, you decide whether to continue building subsequent projects when one fails.
-  By default, your build script will C<die> after the first project that generates an error while building.
-  Change this behavior with C<DontStopForErrors()>.
-  Re-enable it with C<StopForErrors()>.
-
-=cut
-
-sub StopForErrors()
-	{
-		$stop_on_1st_error = 1;
-		
-			# Can't stop for errors unless we notice them.
-			# Can't notice them unless we are logging.
-			# If the user didn't explicitly request logging, log to a temporary file.
-
-		if ( ! $recent_errors_file )
-			{
-				OpenErrorLog("${TMPDIR}BuildResults");
-			}
-	}
-
-sub DontStopForErrors()
-	{
-		$stop_on_1st_error = 0;		
-	}
-
-sub log_message($)
-	{
-		if ( $logging )
-			{
-				my ($message) = @_;
-				print ERROR_LOG $message;
-			}
-	}
-
-sub log_message_with_time($)
-	{
-		if ( $logging )
-			{
-				my ($message) = @_;
-				my $time_stamp = localtime();
-				log_message("$message ($time_stamp)\n");
-			}
-	}
-
-sub log_recent_errors($)
-	{
-		my ($project_name) = @_;
-		my $found_errors = 0;
-	
-		if ( $logging )
-			{
-				open(RECENT_ERRORS, "<$recent_errors_file");
-
-				while( <RECENT_ERRORS> )
-					{
-						if ( /^Error/ || /^CouldnÕt find project file/ || /^Link Error/ )
-							{
-#								if (!$found_errors)
-#									print $_;
-								$found_errors = 1;
-							}
-						print ERROR_LOG $_;
-					}
-
-				close(RECENT_ERRORS);
-				unlink("$recent_errors_file");
-			}
-		
-		if ( $stop_on_1st_error && $found_errors )
-			{
-				print ERROR_LOG "### Build failed.\n";
-				die "### Errors encountered building \"$project_name\".\n";
-			}
-	}
-	
-sub DoBuildProject($$$)
-	{
-		my ($project_path, $target_name, $clean_build) = @_;
-		$project_path = full_path_to($project_path);
-
-#		$project_path =~ m/.+:(.+)/;
-#		my $project_name = $1;
-
-		log_message_with_time("### Building \"$project_path\"");
-
-			# Check that the given project exists
-		if (! -e $project_path)
-			{
-				print ERROR_LOG "### Build failed.\n";
-				die "### Can't find project file \"$project_path\".\n";
-			}
-		
-		print "Building \"$project_path\[$target_name\]\"\n";
-		
-		$had_errors = Moz::CodeWarriorLib::build_project(
-			$project_path, $target_name, $recent_errors_file, $clean_build
-		);
-		WaitNextEvent();
-
-#		$had_errors =
-#MacPerl::DoAppleScript(<<END_OF_APPLESCRIPT);
-#	tell (load script file "$CodeWarriorLib") to BuildProject("$project_path", "$project_name", "$target_name", "$recent_errors_file", $clean_build)
-#END_OF_APPLESCRIPT
-
-			# Append any errors to the globally accumulated log file
-#		if ( $had_errors ) # Removed this test, because we want warnings, too.  -- jrm
-			{
-				log_recent_errors($project_path);
-			}
-	}
-
-
-sub ImportXMLProject($$)
-{
-    my ($xml_path, $project_path) = @_;
-
-#    my ($codewarrior_ide_name) = Moz::CodeWarriorLib::getCodeWarriorIDEName();
-#    my $ascript = <<EOS;
-#      tell application "$codewarrior_ide_name"
-#        make new (project document) as ("$project_path") with data ("$xml_path")
-#      end tell
-#EOS
-#    print $ascript."\n";
-#    my($result) = MacPerl::DoAppleScript($ascript);
-#    unless ($result) { die "Error: ImportXMLProject AppleScript failed $^E $result\n";  }
-#    
-
-    my($import_error) = Moz::CodeWarriorLib::import_project($xml_path, $project_path);
-    if ($import_error ne "") {
-      die "Error: ImportXMLProject failed with error $import_error\n";
-    }
-}
-
-sub ExportProjectToXML($$)
-{
-    my ($project_path, $xml_path) = @_;
-
-    my (@suffix_list) = (".mcp");
-    my ($project_name, $project_dir, $suffix) = fileparse($project_path, @suffix_list);
-    if ($suffix eq "") { die "Project: $project_path doesn't look like a project file.\n"; }
-    
-    if (-e $xml_path) {
-        print "$xml_path exists - not exporting $project_path\n";
-    }
-    else {
-        print "Exporting $project_path to $xml_path\n";
-        my($export_error) = Moz::CodeWarriorLib::export_project($project_path, $xml_path);
-        if ($export_error ne "") {
-            die "Error: export_project failed with error '$export_error'\n";
-        }
-        
-        if (! -e $xml_path) {
-          die "Error: XML export to $xml_path failed\n";
-        }
-    }
-}
-
-
-=head2 Miscellaneous
-
-C<MakeAlias($old_file, $new_file)> functions like C<symlink()>, except with better argument defaulting and more explicit error messages.
-
-=cut
-
-sub MakeAlias($$)
-	{
-		my ($old_file, $new_file) = @_;
-
-			# if the directory to hold $new_file doesn't exist, create it
-		if ( ($new_file =~ m/(.+:)/) && !-d $1 )
-			{
-				mkpath($1);
-			}
-
-			# if a leaf name wasn't specified for $new_file, use the leaf from $old_file
-		if ( ($new_file =~ m/:$/) && ($old_file =~ m/.+:(.+)/) )
-			{
-				$new_file .= $1;
-			}
-
-		my $message = "Can't create a Finder alias (at \"$new_file\")\n for \"$old_file\"; because ";
-
-		die "Error: $message \"$old_file\" doesn't exist.\n" unless -e $old_file;
-		die "Error: $message I won't replace an existing (non-alias) file with an alias.\n" if ( -e $new_file && ! -l $new_file );
-
-			# now: $old_file exists; $new_file doesn't (or else, is an alias already)
-
-		if ( -l $new_file )
-			{
-					# ...then see if it already points to $old_file
-				my $current_target	= full_path_to(readlink($new_file));
-				my $new_target			= full_path_to($old_file);
-
-				return if ( $current_target eq $new_target );
-					# if the desired alias already exists and points to the right thing, then we're done
-				
-				unlink $new_file;
-			}
-		
-		symlink($old_file, $new_file) || die "Error: $message symlink returned an unexpected error.\n";
-	}
-	
-	
-=pod
-
-C<InstallFromManifest()>
-
-=cut
-
-sub InstallFromManifest($;$$)
-	{
-		my ($manifest_file, $dest_dir, $flat) = @_;
-		
-		$flat = 0 unless defined($flat); # if $flat, all rel. paths in MANIFEST get aliased to the root of $dest_dir
-
-		$dest_dir ||= ":";
-
-		$manifest_file =~ m/(.+):/;
-		my $source_dir =  $1;
-
-		chop($dest_dir) if $dest_dir =~ m/:$/;
-
-		#Mac::Events->import();
-		WaitNextEvent();
-		if ($flat)
-		{
-			print "Doing manifest on \"$manifest_file\" FLAT\n" unless $QUIET;
-		}
-		else
-		{
-			print "Doing manifest on \"$manifest_file\"\n" unless $QUIET;
-		}
-		
-		my $read = maniread(full_path_to($manifest_file));
-		foreach $file (keys %$read)
-			{
-				next unless $file;
-
-				$subdir = ":";
-				if (!$flat && ($file =~ /:.+:/ ))
-					{
-						$subdir = $&;
-					}
-
-				$file = ":$file" unless $file =~ m/^:/;
-				MakeAlias("$source_dir$file", "$dest_dir$subdir");
-			}
-	}
-
-
-=pod
-
-C<InstallResources()>
-
-=cut
-
-# parameters are path to MANIFEST file, destination dir, true (to make copies) or false (to make aliases)
-sub InstallResources($;$;$)
-	{
-		my ($manifest_file, $dest_dir, $copy_files) = @_;
-
-		$dest_dir ||= ":";
-		mkpath($dest_dir) if !-d $dest_dir;
-
-		$manifest_file =~ m/(.+):/;
-		my $source_dir =  $1;
-
-		chop($dest_dir) if $dest_dir =~ m/:$/;
-
-		WaitNextEvent();
-		print "Installing resources from \"$manifest_file\"\n" unless $QUIET;
-		
-		my $read = maniread(full_path_to($manifest_file));
-		foreach $file (keys %$read)
-			{
-				next unless $file;
-				
-				if ($copy_files)
-					{
-						copy("$source_dir:$file", "$dest_dir:$file");
-					}
-				else
-					{
-						MakeAlias("$source_dir:$file", "$dest_dir:$file");
-					}
-			}
-	}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// Delay
-#//--------------------------------------------------------------------------------------------------
-sub Delay($)		
-{
-  my ($delay_seconds) = @_;
-
-  $now = time;
-  
-  $exit_time = $now + $delay_seconds;
-
-  while ($exit_time > $now) {
-     $now = time;
-  }
-	
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// GetFileModDate
-#//--------------------------------------------------------------------------------------------------
-sub GetFileModDate($)
-{
-    my($filePath)=@_;
-    my($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
-        $atime,$mtime,$ctime,$blksize,$blocks) = stat($filePath);
-    return $mtime;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// LaunchCodeWarrior
-#//--------------------------------------------------------------------------------------------------
-sub LaunchCodeWarrior($)
-{
-  my($idepath_file) = @_;   # full path to IDE location file
-  my($cur_dir) = cwd();
-  
-  # this both launches and writes the IDE path file
-  Moz::CodeWarriorLib::activate($idepath_file);
-  
-  chdir($cur_dir);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// GetCodeWarriorRelativePath
-#//--------------------------------------------------------------------------------------------------
-sub GetCodeWarriorRelativePath($)
-{
-  my($rel_path) = @_;
-  return Moz::CodeWarriorLib::getCodeWarriorPath($rel_path);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// RedirectOutputToFile
-#//--------------------------------------------------------------------------------------------------
-sub RedirectOutputToFile($)
-{
-    my($log_file) = @_;
-    
-    # ensure that folders in the path exist
-    my($logdir) = "";
-    my($logfile) = $log_file;
-    
-    if ($log_file =~ /(.+?:)([^:]+)$/)       # ? for non-greedy match
-    {
-        $logdir = $1;
-        $logfile = $2;
-        
-        mkpath($logdir);
-    }
-
-    print "Output is now being redirected to the file '$log_file'\n";
-    
-    open(STDOUT, "> $log_file") || die "Can't redirect stdout";
-    open(STDERR, ">&STDOUT") || die "Can't dup stdout";
-    select(STDERR); $| = 1;     # make unbuffered
-    select(STDOUT); $| = 1;     # make unbuffered
-    
-    MacPerl::SetFileInfo("CWIE", "TEXT", $log_file);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// ActivateApplication
-#//--------------------------------------------------------------------------------------------------
-
-sub ActivateApplication($)
-{
-	my ($appSignature) = @_;
-	my ($psi, $found);
-	my ($appPSN);
-	
-	$found = 0;
-		
-	foreach $psi (values(%Process))
-	{
-		if ($psi->processSignature() eq $appSignature)
-		{
-			$appPSN = $psi->processNumber();
-			$found = 1;
-            last;
-		}
-	}
-
-	if ($found == 0 || SameProcess($appPSN, GetFrontProcess()))
-	{
-		return;
-	}
-
-	SetFrontProcess($appPSN);
-
-	while (GetFrontProcess() != $appPSN)
-	{
-		WaitNextEvent();
-	}
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// IsProcessRunning
-#//--------------------------------------------------------------------------------------------------
-
-sub IsProcessRunning($)
-{
-    my($processName, $psn, $psi) = @_;
-    while ( ($psn, $psi) = each(%Process) ) {
-     if ($psi->processName eq $processName) { return 1; }
-    }
-    return 0;
-}
-
-
-1;
-
-=head1 AUTHORS
-
-Scott Collins <scc@netscape.com>, Simon Fraser <sfraser@netscape.com>, Chris Yeh <cyeh@netscape.com>
-
-=head1 SEE ALSO
-
-BuildMozillaDebug.pl (et al), BuildList.pm, CodeWarriorLib (an AppleScript library)
-
-=head1 COPYRIGHT
-
-The contents of this file are subject to the Netscape Public
-License Version 1.1 (the "License"); you may not use this file
-except in compliance with the License. You may obtain a copy of
-the License at http://www.mozilla.org/NPL/
-
-Software distributed under the License is distributed on an "AS
-IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-implied. See the License for the specific language governing
-rights and limitations under the License.
-
-The Original Code is Mozilla Communicator client code, released
-March 31, 1998.
-
-The Initial Developer of the Original Code is Netscape
-Communications Corporation. Portions created by Netscape are
-Copyright (C) 1998-1999 Netscape Communications Corporation. All
-Rights Reserved.
-
-Contributor(s): 
-
-=cut

mozilla/build/mac/build_scripts/Moz/Prefs.pm

@@ -1,272 +0,0 @@
-
-package Moz::Prefs;
-
-require 5.004;
-require Exporter;
-
-# Package that attempts to read a file from the Preferences folder,
-# and get build settings out of it
-
-use strict;
-
-use Exporter;
-use File::Path;
-
-use Mac::Files;
-
-use vars qw(@ISA @EXPORT);
-
-@ISA		  = qw(Exporter);
-@EXPORT 	= qw(ReadMozUserPrefs);
-
-
-#-------------------------------------------------------------------------------
-#
-# GetPrefsFolder
-#
-#-------------------------------------------------------------------------------
-
-sub GetPrefsFolder()
-{
-  my($prefs_folder) = FindFolder(kOnSystemDisk, kPreferencesFolderType, 1);
-  return $prefs_folder.":Mozilla build prefs";
-}
-
-
-#-------------------------------------------------------------------------------
-#
-# SetArrayValue
-#
-#-------------------------------------------------------------------------------
-sub SetArrayValue($$$)
-{
-  my($array_ref, $index1, $index2) = @_;
-
-  my($index);
-  foreach $index (@$array_ref)
-  {
-    if ($index->[0] eq $index1)
-    {
-      $index->[1] = $index2;
-      return 1;
-    }
-  }
-  
-  return 0;
-}
-
-
-#-------------------------------------------------------------------------------
-#
-# WriteDefaultPrefsFile
-#
-#-------------------------------------------------------------------------------
-
-sub WriteDefaultPrefsFile($)
-{
-  my($file_path) = @_;
-
-  my($file_contents);
-  $file_contents = <<'EOS';
-% You can use this file to customize the Mozilla build system.
-% The following kinds of lines are allowable:
-%   Comment lines, which start with a '%' in the first column
-%   Lines which modify the default build settings. For the list of flags,
-%   see MozBuildFlags.pm. Examples are:
-%
-%    build       pull            0                    % don't pull
-%    options     mng             1                    % turn mng on
-%   
-%   Line containing the special 'buildfrom' flag, which specifies
-%   where to start the build. Example:
-%   
-%    buildfrom   nglayout                % where to start the build
-%
-%   Lines which specify the location of the files used to store paths
-%   to the CodeWarrior IDE, and the MacCVS Pro session file. Note quoting
-%   of paths containing whitespace. Examples:
-%
-%    filepath   idepath         ::codewarrior.txt
-%    filepath   sessionpath     ":Some folder:MacCVS session path.txt"
-%
-%   Lines which modify the build settings like %main::DEBUG.
-%   Any lines which do not match either of the above are assumed
-%   to set variables on $main::. Examples:
-%   
-%    MOZILLA_OFFICIAL    1
-%
-EOS
-
-  $file_contents =~ s/%/#/g;
-   
-  local(*PREFS_FILE);
-
-  open(PREFS_FILE, "> $file_path") || die "Could not write default prefs file\n";
-  print PREFS_FILE ($file_contents);
-  close(PREFS_FILE);
-
-  MacPerl::SetFileInfo("McPL", "TEXT", $file_path);
-}
-
-
-#-------------------------------------------------------------------------------
-#
-# HandlePrefSet
-#
-#-------------------------------------------------------------------------------
-sub HandlePrefSet($$$$)
-{
-  my($flags, $name, $value, $desc) = @_;
-
-  if (SetArrayValue($flags, $name, $value)) {
-    print "Prefs set $desc flag '$name' to '$value'\n";
-  } else {
-    die "$desc setting '$name' is not a valid option\n";
-  }
-
-}
-
-
-#-------------------------------------------------------------------------------
-#
-# HandleBuildFromPref
-#
-#-------------------------------------------------------------------------------
-sub HandleBuildFromPref($$)
-{
-  my($build_array, $name) = @_;
-
-  my($setting) = 0;
-  my($index);
-  foreach $index (@$build_array)
-  {
-    if ($index->[0] eq $name) {
-      $setting = 1;
-    }
-    
-    $index->[1] = $setting;    
-  }
-
-  if ($setting == 1) {
-    print "Building from $name onwards, as specified by prefs\n";
-  } else {
-    printf "Failed to find buildfrom setting '$name'\n";
-  }
-}
-
-
-#-------------------------------------------------------------------------------
-#
-# ReadPrefsFile
-#
-#-------------------------------------------------------------------------------
-
-sub ReadPrefsFile($$$$$)
-{
-  my($file_path, $build_flags, $options_flags, $filepath_flags, $create_if_missing) = @_;
-  
-  local(*PREFS_FILE);
-  
-  if (open(PREFS_FILE, "< $file_path"))
-  {
-    print "Reading build prefs from '$file_path'\n";
-  
-    while (<PREFS_FILE>)
-    {
-      my($line) = $_;
-      chomp($line);
-      
-      if ($line =~ /^\#/ || $line =~ /^\s*$/) {    # ignore comments and empty lines
-        next;
-      }
-            
-      if (($line =~ /^\s*([^#\s]+)\s+([^#\s]+)\s+\"(.+)\"(\s+#.+)?/) ||
-          ($line =~ /^\s*([^#\s]+)\s+([^#\s]+)\s+\'(.+)\'(\s+#.+)?/) ||
-          ($line =~ /^\s*([^#\s]+)\s+([^#\s]+)\s+([^#\s]+)(\s+#.+)?/))
-      {
-        my($array_name) = $1;      
-        my($option_name) = $2;
-        my($option_value) = $3;      
-      
-        # print "Read '$array_name' '$option_name' '$option_value'\n";
-        
-        if ($array_name eq "build")
-        {
-          HandlePrefSet($build_flags, $option_name, $option_value, "Build");
-        }
-        elsif ($array_name eq "options")
-        {
-          HandlePrefSet($options_flags, $option_name, $option_value, "Options");
-        }
-        elsif ($array_name eq "filepath" && $option_name && $option_value)
-        {
-          HandlePrefSet($filepath_flags, $option_name, $option_value, "Filepath");
-        }
-        else
-        {
-          print "Unknown pref option at $line\n";
-        }
-      }
-      elsif ($line =~ /^\s*buildfrom\s+([^#\s]+)(\s+#.+)?/)
-      {
-        my($build_start) = $1;
-        HandleBuildFromPref($build_flags, $build_start);
-      }
-      elsif ($line =~ /^\s*([^#\s]+)\s+([^#\s]+)(\s+#.+)?/)
-      {
-        my($build_var) = $1;
-        my($var_setting) = $2;
-        
-        print "Setting \$main::$build_var to $var_setting\n";
-        eval "\$main::$build_var = \"$var_setting\"";
-      }
-      else
-      {
-        print "Unrecognized input line at $line\n";
-      }
-      
-    }
-    
-    close(PREFS_FILE);  
-  }
-  elsif ($create_if_missing)
-  {
-    print "No prefs file found at $file_path; using defaults\n";
-    
-    my($folder_path) = $file_path;
-    $folder_path =~ s/[^:]+$//;
-    mkpath($folder_path);
-    WriteDefaultPrefsFile($file_path);
-  }
-}
-
-
-#-------------------------------------------------------------------------------
-#
-# ReadMozUserPrefs
-#
-#-------------------------------------------------------------------------------
-
-sub ReadMozUserPrefs($$$$)
-{
-  my($prefs_file_name, $build_flags, $options_flags, $filepath_flags) = @_;
-  
-  if ($prefs_file_name eq "") { return; }
-  
-  # if local prefs exist, just use those. Othewise, look in the prefs folder
-  if (-e $prefs_file_name)
-  {
-    # read local prefs
-    ReadPrefsFile($prefs_file_name, $build_flags, $options_flags, $filepath_flags, 0);
-  }
-  else
-  {
-    # first read prefs folder prefs
-    my($prefs_path) = GetPrefsFolder();
-    $prefs_path .= ":$prefs_file_name";
-
-    ReadPrefsFile($prefs_path, $build_flags, $options_flags, $filepath_flags, 1);
-  }
-}
-
-1;

mozilla/build/mac/build_scripts/Moz/ProjectXML.pm

@@ -1,932 +0,0 @@
-#!/usr/bin/perl
-
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#   Simon Fraser <sfraser@netscape.com>
-#
-
-package Moz::ProjectXML;
-
-require 5.004;
-require Exporter;
-
-use strict;
-use Exporter;
-
-use Cwd;
-use XML::DOM;
-
-use vars qw(@ISA @EXPORT);
-
-@ISA      = qw(Exporter);
-@EXPORT   = qw(
-                ParseXMLDocument
-                DisposeXMLDocument
-                WriteXMLDocument
-                CleanupPro5XML
-                GetTargetsList
-                CloneTarget
-                SetAsSharedLibraryTarget
-                SetAsStaticLibraryTarget
-                AddTarget
-                RemoveTarget
-                GetTargetSetting
-                SetTargetSetting
-                getChildElementTextContents
-              );
-
-
-#--------------------------------------------------------------------------------------------------
-# A module for reading, manipulating, and writing XML-format CodeWarrior project files.
-# 
-# Sample usage:
-# 
-# use ProjectXML;
-# 
-# my $doc = ProjectXML::ParseXMLDocument("Test.mcp.xml");
-# ProjectXML::CloneTarget($doc, "Test.shlb", "Test.lib");
-# ProjectXML::SetAsStaticLibraryTarget($doc, "Test.lib", "TestOutput.lib");
-# ProjectXML::WriteXMLDocument($doc, "Test_out.xml");
-# ProjectXML::DisposeXMLDocument($doc);
-# 
-#--------------------------------------------------------------------------------------------------
-
-
-#//--------------------------------------------------------------------------------------------------
-#// ParseXMLDocument
-#// Note that the caller must call DisposeXMLDocument on the returned doc
-#//--------------------------------------------------------------------------------------------------
-sub ParseXMLDocument($)
-{
-  my($doc_path) = @_;
-
-  my $parser = new XML::DOM::Parser(ErrorContext => 2);
-  my $doc = $parser->parsefile($doc_path);
-
-  return $doc;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// DisposeXMLDocument
-#// Needed to avoid memory leaks - cleanup circular references for garbage collection
-#//--------------------------------------------------------------------------------------------------
-sub DisposeXMLDocument($)
-{
-  my($doc) = @_;
-  
-  $doc->dispose();
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// WriteXMLDocument
-#//--------------------------------------------------------------------------------------------------
-
-sub _pro5_tag_compression($$)
-{
-   return 1;    # Pro 5 is broken and can't import XML with <foo/> style tags
-}
-
-sub _pro6plus_tag_compression($$)
-{
-   return 0;    # Pro 6 can deal with empty XML tags like <foo/>
-}
-
-sub WriteXMLDocument($$$)
-{
-  my($doc, $file_path, $ide_version) = @_;
-
-  if ($ide_version eq "4.0")
-  {
-    XML::DOM::setTagCompression(\&_pro5_tag_compression);
-  }
-  else
-  {
-    XML::DOM::setTagCompression(\&_pro6plus_tag_compression);
-  }
-
-  $doc->printToFile($file_path);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// CleanupPro5XML
-#// XML Projects exported by Pro 5 contain garbage data under the MWMerge_MacOS_skipResources
-#// setting. This routine cleans this up, saving the result to a new file
-#//--------------------------------------------------------------------------------------------------
-sub CleanupPro5XML($$)
-{
-  my($xml_path, $out_path) = @_;
-  
-  local(*XML_FILE);
-  open(XML_FILE, "< $xml_path") || die "Error: failed to open file $xml_path\n";
-  
-  local(*CLEANED_FILE);
-  open(CLEANED_FILE, "> $out_path") || die "Error: failed to open file $out_path for writing\n";
-  
-  my $in_skip_resources_settings = 0;
-  
-  while(<XML_FILE>)
-  {
-      my($line) = $_;
-
-      if ($line =~ /^<\?codewarrior/)    # is processing inst line
-      {
-        my $test_line = $line;
-        chomp($test_line);
-  
-        my $out_line = $test_line;
-        if ($test_line =~ /^<\?codewarrior\s+exportversion=\"(.+)\"\s+ideversion=\"(.+)\"\s*\?>$/)
-        {
-          my $export_version = $1;
-          my $ide_version    = $2;
-
-          $ide_version = "4.0_mozilla";   # pseudo IDE version so we know we touched it
-          $out_line = "<?codewarrior exportversion=\"".$export_version."\" ideversion=\"".$ide_version."\"?>";
-        }
-
-        print CLEANED_FILE "$out_line\n";
-        next;
-      }
-      
-      if ($line =~ /MWMerge_MacOS_skipResources/)
-      {
-        $in_skip_resources_settings = 1;
-        print CLEANED_FILE "$line";
-      }
-      elsif($in_skip_resources_settings && $line =~ /<!-- Settings for/)
-      {
-        # leaving bad settings lines. Write closing tag
-        print CLEANED_FILE "                    <!-- Corrupted setting entries removed by script -->\n";
-        print CLEANED_FILE "                </SETTING>\n\n";
-        
-        print CLEANED_FILE "$line";
-
-        $in_skip_resources_settings = 0;
-      }
-      elsif (!$in_skip_resources_settings)
-      {      
-        print CLEANED_FILE "$line";
-      }
-  }
-  
-  close(XML_FILE);
-  close(CLEANED_FILE);
-
-}
-
-#--------------------------------------------------------------------------------------------------
-# SniffProjectXMLIDEVersion
-#
-#--------------------------------------------------------------------------------------------------
-sub SniffProjectXMLIDEVersion($)
-{
-  my($xml_path) = @_;
-  
-  my $found_version = "";
-  
-  local(*XML_FILE);
-  open(XML_FILE, "< $xml_path") || die "Error: failed to open file $xml_path\n";
-  
-  while(<XML_FILE>)
-  {
-      my($line) = $_;
-      chomp($line);
-      
-      if ($line =~ /^<\?codewarrior/)    # is processing inst line
-      {
-        unless ($line =~ /^<\?codewarrior\s+exportversion=\"(.+)\"\s+ideversion=\"(.+)\"\s*\?>$/)
-        {
-          die "Error: Failed to find ideversion in $xml_path in line $line\n";
-        }
-        
-        my $export_version = $1;
-        my $ide_version    = $2;
-
-        $found_version = $ide_version;         
-        last;
-      }
-  }
-  
-  close(XML_FILE);
-
-  return $found_version;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// GetTargetsList
-#// Returns an array of target names
-#//--------------------------------------------------------------------------------------------------
-sub GetTargetsList($)
-{
-  my($doc) = @_;
-
-  my $nodes = $doc->getElementsByTagName("TARGET");
-  my $n = $nodes->getLength;
-  
-  my @target_names;
-  
-  for (my $i = 0; $i < $n; $i++)
-  {
-    my ($node) = $nodes->item($i);   
-   
-    my($target_name) = getChildElementTextContents($node, "NAME");
-    push(@target_names, $target_name);
-  }
-
-  return @target_names;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// CloneTarget
-#// Clone the named target, renaming it to 'new_name'
-#//--------------------------------------------------------------------------------------------------
-sub CloneTarget($$$)
-{
-  my($doc, $target_name, $new_name) = @_;
-
-  my $target_node   = getTargetNode($doc, $target_name);
-
-  # clone here
-  my $target_clone  = $target_node->cloneNode(1);   # deep clone
-  
-  # -- munge target settings --
-
-  # set the target name field
-  setChildElementTextContents($doc, $target_clone, "NAME", $new_name);
-  
-  # set the targetname pref
-  setTargetNodeSetting($doc, $target_clone, "Targetname", $new_name);
-
-  # -- insert new target subtree --
-  
-  my $target_list   = $target_node->getParentNode();
-  $target_list->appendChild($target_clone);
-  
-  # -- now add to targetorder --
-  my (@target_order_nodes) = getChildOfDocument($doc, "TARGETORDER");
-  
-  my $target_order = @target_order_nodes[0];
-  
-  my $new_order     = $doc->createElement("ORDEREDTARGET");
-  my $order_name    = $doc->createElement("NAME");
-  
-  $new_order->appendChild($order_name);
-
-  setChildElementTextContents($doc, $new_order, "NAME", $new_name);
-  $target_order->appendChild($new_order);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// SetAsSharedLibraryTarget
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub SetAsSharedLibraryTarget($$$)
-{
-  my($doc, $target_name, $output_name) = @_;
-
-  my $target_node = getTargetNode($doc, $target_name);
-
-  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_type", "SharedLibrary");
-  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_filetype", "1936223330"); #'shlb'
-  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_outfile", $output_name);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// AddFileToTarget
-#// 
-#// Add a file to the specified target(s).
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub AddFileToTarget($$$)
-{
-  my($doc, $target_list, $file_name) = @_;
-
-  # the file must be added in 3 places:
-  # 1. in <TARGET><FILELIST><FILE> (with linkage flags if necessary)
-  # 2. in <TARGET><LINKORDER><FILEREF>
-  # 3. in <GROUPLIST><GROUP><FILEREF>
-  die "Write me\n";
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// RemoveFileFromTarget
-#// 
-#// Remove a file from the specified target, removing it from the entire project
-#// if no other targets reference it.
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub RemoveFileFromTarget($$$)
-{
-  my($doc, $target_node, $file_name) = @_;
-  
-  # the file must be removed in 3 places:
-  # 1. in <TARGET><FILELIST><FILE>
-  # 2. in <TARGET><LINKORDER><FILEREF>
-  # 3. in <GROUPLIST><GROUP><FILEREF>
-  
-  # first, remove from <FILELIST>
-  my $filelist_node = getFirstChildElement($target_node, "FILELIST");
-  unless ($filelist_node) { die "Error: failed to find FILELIST node\n"; }
-  
-  my $file_node = getChildNodeByGrandchildContents($doc, $filelist_node, "FILE", "PATH", $file_name);
-  unless ($file_node) { return; }
-
-  $filelist_node->removeChild($file_node);
-  
-  # next, remove from <LINKORDER>
-  my $linkorder_node = getFirstChildElement($target_node, "LINKORDER");
-  unless ($linkorder_node) { die "Error: failed to find LINKORDER node\n"; }
-  
-  my $fileref_node = getChildNodeByGrandchildContents($doc, $linkorder_node, "FILEREF", "PATH", $file_name);
-  unless ($fileref_node) { die "Error: link order node for file $file_name not found\n"; }
-
-  $linkorder_node->removeChild($fileref_node);
-  
-  # last, remove from <GROUPLIST>
-  # <GROUPLIST> is cross-target, so we have to be careful here.
-  my $grouplist_node = getChildOfDocument($doc, "GROUPLIST");
-  unless ($grouplist_node) { die "Error: failed to find GROUPLIST node\n"; }
-
-  # if the file isn't in any other targets, remove it from the groups
-  if (!GetFileInUse($doc, $file_name))
-  {
-    print "File $file_name is in no other targest. Removing from project\n";
-
-    my @group_nodes;
-    getChildElementsOfType($doc, $grouplist_node, "GROUP", \@group_nodes);
-    my $group_node;
-    foreach $group_node (@group_nodes)
-    {
-      my @fileref_nodes;
-      getChildElementsOfType($doc, $group_node, "FILEREF", \@fileref_nodes);
-  
-      my $fileref_node;
-      foreach $fileref_node (@fileref_nodes)
-      {
-        my $path_name = getChildElementTextContents($fileref_node, "PATH");
-        if ($path_name eq $file_name)
-        {
-          print "Removing $file_name from project group list\n";
-          $group_node->removeChild($fileref_node);
-          last;
-        }
-      }
-      
-      # can a file appear in more than one group?
-    }
-  }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// SetAsStaticLibraryTarget
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub SetAsStaticLibraryTarget($$$)
-{
-  my($doc, $target_name, $output_name) = @_;
-
-  my $target_node = getTargetNode($doc, $target_name);
-
-  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_type", "Library");
-  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_filetype", "1061109567"); #'????'
-  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_outfile", $output_name);
-
-  # static targets don't need any library linkage, so we can remove linkage
-  # with all .shlb and .Lib files.
-  
-  my(@obsolete_files) = ("NSStdLibStubs", "InterfacesStubs", "InterfaceLib", "InternetConfigLib");
-
-  print " Removing libraries etc. from target\n";
-
-  # get all files in target
-  my @target_files = GetTargetFilesList($doc, $target_name);
-  my $target_file;
-  foreach $target_file (@target_files)
-  {
-    if ($target_file =~ /(\.shlb|\.lib|\.Lib|\.o|\.exp)$/)
-    {
-      RemoveFileFromTarget($doc, $target_node, $target_file);
-    }
-  }
-  
-  print " Removing stub libraries from target\n";
-  
-  # then remove files with known names
-  my $obs_file;
-  foreach $obs_file (@obsolete_files)
-  {
-    RemoveFileFromTarget($doc, $target_node, $obs_file);
-  }
-
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// AddTarget
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub AddTarget($$)
-{
-  my($doc, $target_name) = @_;
-
-  die "Write me\n";
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// RemoveTarget
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub RemoveTarget($$)
-{
-  my($doc, $target_name) = @_;
-
-  die "Write me\n";
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// GetTargetSetting
-#// Get the value for the specified setting in the specified target
-#//--------------------------------------------------------------------------------------------------
-sub GetTargetSetting($$$)
-{
-  my($doc, $target_name, $setting_name) = @_;
-
-  my $target_node   = getTargetNode($doc, $target_name);
-  return getTargetNodeSetting($target_node, "VALUE");
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// SetTargetSetting
-#// Set the value for the specified setting in the specified target
-#//--------------------------------------------------------------------------------------------------
-sub SetTargetSetting($$$$)
-{
-  my($doc, $target_name, $setting_name, $new_value) = @_;
-
-  my $target_node   = getTargetNode($doc, $target_name);
-  setTargetNodeSetting($doc, $target_node, "VALUE", $new_value);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// GetTargetFilesList
-#// Return an array of the files in the target (in filelist order)
-#//--------------------------------------------------------------------------------------------------
-sub GetTargetFilesList($$)
-{
-  my($doc, $target_name) = @_;
-
-  my $target_node = getTargetNode($doc, $target_name);
-
-  my @files_list;
-    
-  my $filelist_node = getFirstChildElement($target_node, "FILELIST");
-  unless ($filelist_node) { die "Error: failed to find FILELIST node\n"; }
-
-  my @file_nodes;
-  getChildElementsOfType($doc, $filelist_node, "FILE", \@file_nodes);
-  
-  my $node;
-  foreach $node (@file_nodes)
-  {
-    my $file_name = getChildElementTextContents($node, "PATH");
-    push(@files_list, $file_name);
-  }
-  
-  return @files_list;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// FileIsInTarget
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub FileIsInTarget($$$)
-{
-  my($doc, $file_name, $target_name) = @_;
-
-  my $target_node = getTargetNode($doc, $target_name);
-  unless ($target_node) { die "Error: no target found called $target_name\n"; }
-
-  my $file_node = GetTargetFileNode($doc, $target_node, $file_name);
-  if ($file_node) {
-    return 1;
-  }
-  
-  return 0;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// GetFileTargetsList
-#// Return an array of the targets that a file is in (expensive)
-#//--------------------------------------------------------------------------------------------------
-sub GetFileTargetsList($$)
-{
-  my ($doc, $file_name) = @_;
-
-  my @target_list;
-
-  my @targets = GetTargetsList($doc);
-  my $target;
-  
-  foreach $target (@targets)
-  {
-    if (FileIsInTarget($doc, $file_name, $target))
-    {
-      push(@target_list, $target);
-    }
-  }
-  
-  return @target_list;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// GetTargetFileNode
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub GetTargetFileNode($$$)
-{
-  my($doc, $target_node, $file_name) = @_;
-
-  my $filelist_node = getFirstChildElement($target_node, "FILELIST");
-  unless ($filelist_node) { die "Error: failed to find FILELIST node\n"; }
-  
-  my $file_node = getChildNodeByGrandchildContents($doc, $filelist_node, "FILE", "PATH", $file_name);
-
-  return $file_node;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// GetFileInUse
-#// Return true if the file is used by any target
-#//--------------------------------------------------------------------------------------------------
-sub GetFileInUse($$)
-{
-  my($doc, $file_name) = @_;
-
-  my $targetlist_node = getChildOfDocument($doc, "TARGETLIST");
-
-  my $target_node = $targetlist_node->getFirstChild();
- 
-  while ($target_node)
-  {
-    if ($target_node->getNodeTypeName eq "ELEMENT_NODE" &&
-        $target_node->getTagName() eq "TARGET")
-    {
-      # if this is a target node
-      my $file_node = GetTargetFileNode($doc, $target_node, $file_name);
-      if ($file_node) {
-        return 1;   # found it
-      }      
-    }
-
-    $target_node = $target_node->getNextSibling();
-  }
-  
-  # not found
-  return 0;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// getChildOfDocument
-#//--------------------------------------------------------------------------------------------------
-sub getChildOfDocument($$)
-{
-  my($doc, $child_type) = @_;
-
-  return getFirstChildElement($doc->getDocumentElement(), $child_type);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getFirstChildElement
-#//--------------------------------------------------------------------------------------------------
-sub getFirstChildElement($$)
-{
-  my($node, $element_name) = @_;
-
-  my $found_node;
-  
-  unless ($node) { die "getFirstChildElement called with empty node\n"; }
-  
-  #look for the first "element_name" child
-
-  my $child_node = $node->getFirstChild();
- 
-  while ($child_node)
-  {
-    if ($child_node->getNodeTypeName eq "ELEMENT_NODE" &&
-        $child_node->getTagName() eq $element_name)
-    {
-      $found_node = $child_node;
-      last;
-    }
-
-    $child_node = $child_node->getNextSibling();
-  }
-   
-  return $found_node;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getChildElementsOfType
-#// 
-#// Return an array of refs to child nodes of the given type
-#//--------------------------------------------------------------------------------------------------
-sub getChildElementsOfType($$$$)
-{
-  my($doc, $node, $child_type, $array_ref) = @_;
-
-  my $child_node = $node->getFirstChild();
- 
-  while ($child_node)
-  {
-    if ($child_node->getNodeTypeName eq "ELEMENT_NODE" &&
-        $child_node->getTagName() eq $child_type)
-    {
-      push(@$array_ref, $child_node);
-    }
-
-    $child_node = $child_node->getNextSibling();
-  }
-
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// getChildElementTextContents
-#//--------------------------------------------------------------------------------------------------
-#
-# Given <FOOPY><NERD>Hi!</NERD></FOOPY>, where $node is <FOOPY>,
-# returns "Hi!". If > 1 <NERD> node, returns the contents of the first.
-#
-sub getChildElementTextContents($$)
-{
-  my($node, $tag_name) = @_;
-
-  my $first_element = getFirstChildElement($node, $tag_name);  
-  my $text_node     = $first_element->getFirstChild();
-  
-  my $text_contents = "";
-  
-  # concat adjacent text nodes
-  while ($text_node)
-  {
-    if ($text_node->getNodeTypeName() ne "TEXT_NODE")
-    {
-      last;
-    }
-
-    $text_contents = $text_contents.$text_node->getData();
-    $text_node = $text_node->getNextSibling();
-  }
-
-  return $text_contents;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// setChildElementTextContents
-#//--------------------------------------------------------------------------------------------------
-sub setChildElementTextContents($$$$)
-{
-  my($doc, $node, $tag_name, $contents_text) = @_;
-  
-  my $first_element = getFirstChildElement($node, $tag_name);  
-  my $new_text_node = $doc->createTextNode($contents_text);
-  
-  # replace all child elements with a text element
-  removeAllChildren($first_element);
-  
-  $first_element->appendChild($new_text_node);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getChildNodeByContents
-#// 
-#// Consider <foo><bar><baz>Foopy</baz></bar><bar><baz>Loopy</baz></bar></foo>
-#// This function, when called with getChildNodeByContents($foonode, "bar", "baz", "Loopy")
-#// returns the second <bar> node.
-#//--------------------------------------------------------------------------------------------------
-sub getChildNodeByGrandchildContents($$$$$)
-{
-  my($doc, $node, $child_type, $gc_type, $gc_contents) = @_;    # gc = grandchild
-
-  my $found_node;
-  my $child_node = $node->getFirstChild();
-  while ($child_node)
-  {
-    if ($child_node->getNodeTypeName eq "ELEMENT_NODE" &&
-        $child_node->getTagName() eq $child_type)
-    {
-      # check for a child of this node of type 
-      my $child_contents = getChildElementTextContents($child_node, $gc_type);
-
-      if ($child_contents eq $gc_contents)
-      {
-        $found_node = $child_node;
-        last;
-      }
-    }
-
-    $child_node = $child_node->getNextSibling();
-  }
-
-  return $found_node;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getTargetNode
-#//--------------------------------------------------------------------------------------------------
-sub getTargetNode($$)
-{
-  my($doc, $target_name) = @_;
-
-  my $targetlist_node = getChildOfDocument($doc, "TARGETLIST");
-  return getChildNodeByGrandchildContents($doc, $targetlist_node, "TARGET", "NAME", $target_name);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getTargetNamedSettingNode
-#//--------------------------------------------------------------------------------------------------
-sub getTargetNamedSettingNode($$)
-{
-  my($target_node, $setting_name) = @_;
-
-  my $setting_node;
-
-  my $settinglist_node = getFirstChildElement($target_node, "SETTINGLIST");
-  my $child_node = $settinglist_node->getFirstChild();
- 
-  while ($child_node)
-  {
-    if ($child_node->getNodeTypeName ne "ELEMENT_NODE")
-    {
-      $child_node = $child_node->getNextSibling();
-      next;
-    }
-    
-    if ($child_node->getTagName() eq "SETTING")
-    {
-      my $set_name = getChildElementTextContents($child_node, "NAME");
-
-      if ($set_name eq $setting_name)
-      {
-        $setting_node = $child_node;
-        last;
-      }
-    }
-
-    $child_node = $child_node->getNextSibling();
-  }
-
-  return $setting_node;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getTargetNodeSetting
-#//--------------------------------------------------------------------------------------------------
-sub getTargetNodeSetting($$)
-{
-  my($target_node, $setting_name) = @_;
-  
-  my $setting_node  = getTargetNamedSettingNode($target_node, $setting_name);
-  return getChildElementTextContents($setting_node, "VALUE");
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// setTargetNodeSetting
-#//--------------------------------------------------------------------------------------------------
-sub setTargetNodeSetting($$$$)
-{
-  my($doc, $target_node, $setting_name, $new_value) = @_;
-
-  my $setting_node  = getTargetNamedSettingNode($target_node, $setting_name);
-
-  setChildElementTextContents($doc, $setting_node, "VALUE", $new_value);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// elementInArray
-#//--------------------------------------------------------------------------------------------------
-sub elementInArray($$)
-{
-  my($element, $array) = @_;
-  my $test;
-  foreach $test (@$array)
-  {
-    if ($test eq $element) {
-      return 1;
-    }
-  }
-  return 0;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// removeAllChildren
-#//--------------------------------------------------------------------------------------------------
-sub removeAllChildren($)
-{
-  my($node) = @_;
-  
-  my $child_node = $node->getFirstChild();
-  
-  while ($child_node)
-  {
-    $node->removeChild($child_node);
-    $child_node = $node->getFirstChild();
-  }
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// dumpNodeData
-#//--------------------------------------------------------------------------------------------------
-sub dumpNodeData($)
-{
-  my($node) = @_;
-  
-  unless ($node) { die "Null node passed to dumpNodeData\n"; }
-  
-  print "Dumping node $node\n";
-  
-  my($node_type) = $node->getNodeTypeName();
-  
-  if ($node_type eq "ELEMENT_NODE")
-  {
-    my($node_name) = $node->getTagName();
-    print "Element $node_name\n";
-  }
-  elsif ($node_type eq "TEXT_NODE")
-  {
-    my($node_data) = $node->getData;
-    # my(@node_vals) = unpack("C*", $node_data);
-    print "Text '$node_data'\n";    # may contain LF chars
-  }
-  else
-  {
-    print "Node $node_type\n";
-  }
-
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// dumpNodeTree
-#//--------------------------------------------------------------------------------------------------
-sub dumpNodeTree($)
-{
-  my($node) = @_;
-  
-  my($child_node) = $node->getFirstChild();
-  
-  unless ($child_node) { return; }
-
-  # recurse
-  dumpNodeData($child_node);
-  
-  # then go through child nodes
-  while ($child_node)
-  {
-    dumpNodeTree($child_node);
-  
-    $child_node = $child_node->getNextSibling();
-  }
-}
-
-
-
-
-1;
-

mozilla/build/mac/build_scripts/MozillaBuildFlags.txt

@@ -1,90 +0,0 @@
-#-------------------------------------------------------------------------------
-# These 3 lists are the 'master lists' to control what gets built.
-# 
-# Ordering in these arrays is important; it has to reflect the order in
-# which the build occurs.
-#
-# Setting containing spaces must be quoted with double quotes.
-#-------------------------------------------------------------------------------
-
-build_flags
-all             1
-pull            0
-dist            0
-config          0
-xpidl           0
-idl             0
-stubs           0
-runtime         0
-common          0
-imglib          0
-libimg2         0
-necko           0
-security        0
-browserutils    0
-intl            0
-nglayout        0
-accessiblity    0
-editor          0
-embedding       0
-viewer          0
-xpapp           0
-extensions      0
-plugins         0
-mailnews        0
-apprunner       0
-resources       0
-
-options_flags
-pull_by_date    0
-chrome_jars     1
-chrome_files    0
-use_jars        1
-transformiix    1
-mathml          0      MOZ_MATHML
-svg             0      MOZ_SVG
-# svg requires libart, which is an lgpl library. You need to pull it 
-# explicitly.
-libart_lgpl     0
-mng             1
-ldap            1      MOZ_LDAP_XPCOM
-ldap_experimental 0    MOZ_LDAP_XPCOM_EXPERIMENTAL
-xmlextras       1
-wsp             0      MOZ_WSP
-inspector       1
-mailextras      1
-xptlink         0
-psm             0      MOZ_PSM
-embedding_test  1
-embedding_chrome 0
-embedding_xulprefs 0
-embedding_xulsecurity 0
-carbon          0      TARGET_CARBON
-useimg2         1      USE_IMG2
-lowmem          0      MOZ_MAC_LOWMEM
-accessible      1      ACCESSIBILITY
-bidi            1      IBMBIDI
-p3p             0
-jsd             1
-venkman         1
-moz_logging     1      MOZ_LOGGING
-chatzilla       1
-content_packs   1
-xml_rpc         1
-cview           1
-help            1
-timeline        0      MOZ_TIMELINE
-static_build    0      MOZ_STATIC_COMPONENT_LIBS
-string_debug    0      DEBUG_STRING
-string_stats    0      DEBUG_STRING_STATS
-xpctools        0      XPC_TOOLS_SUPPORT
-smime           1
-mdn             1
-print_preview   1      NS_PRINT_PREVIEW
-moz_xul         1      MOZ_XUL
-
-filepath_flags
-idepath             ":CodeWarrior IDE Path.txt"
-sessionpath         ":Mozilla session path.txt"
-buildlogfilepath    ":Build Logs:Mozilla build log.txt"   # this is a path
-scriptlogfilepath   ":Build Logs:Mozilla script log.txt"

mozilla/build/mac/build_scripts/MozillaCheckoutList.txt

@@ -1,22 +0,0 @@
-# List of modules to check out. Format is
-#   module, (tag), (date)
-# where tag and date are optional (non-trailing commas are required)
-#
-# Examples:
-#   mozilla/nsprpub, NSPRPUB_CLIENT_TAG
-#   mozilla/gc, , 10/25/2000 12:00:00
-#
-
-mozilla/nsprpub,        	NETSCAPE_7_02_RELEASE
-mozilla/security/nss,   	NETSCAPE_7_02_RELEASE
-mozilla/security/manager,	NETSCAPE_7_02_RELEASE
-mozilla/accessible,			NETSCAPE_7_02_RELEASE
-mozilla/directory/c-sdk,	NETSCAPE_7_02_RELEASE
-mozilla/lib/mac/Instrumentation, 	NETSCAPE_7_02_RELEASE
-mozilla/gfx2, 				NETSCAPE_7_02_RELEASE
-mozilla/modules/libpr0n,	NETSCAPE_7_02_RELEASE
-SeaMonkeyAll, 				NETSCAPE_7_02_RELEASE
-
-## You need this if you want to be able to use SVG
-## Note that this library is under the LGPL, not the MPL
-#mozilla/other-licenses/libart_lgpl

mozilla/build/mac/build_scripts/PullMozilla.pl

@@ -1,79 +0,0 @@
-#!perl
-
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#   Simon Fraser <sfraser@netscape.com>
-#
-
-require 5.004;
-
-use strict;
-
-use Cwd;
-use Moz::BuildUtils;
-use Moz::BuildCore;
-
-#-------------------------------------------------------------
-# Where have the build options gone?
-# 
-# The various build flags have been centralized into one place. 
-# The master list of options is in MozBuildFlags.txt. However, 
-# you should never need to edit that file, or this one.
-# 
-# To customize what gets built, or where to start the build, 
-# edit the $prefs_file_name file in
-# System Folder:Preferences:Mozilla build prefs:
-# Documentation is provided in that file.
-#-------------------------------------------------------------
-
-my($prefs_file_name) = "Mozilla pull prefs";
-
-#-------------------------------------------------------------
-# hashes to hold build options
-#-------------------------------------------------------------
-my(%build);
-my(%options);
-my(%filepaths);
-my(%optiondefines);
-
-# Hash of input files for this build. Eventually, there will be
-# input files for manifests, and projects too.
-my(%inputfiles) = (
-  "buildflags",     "MozillaBuildFlags.txt",
-  "checkoutdata",   "MozillaCheckoutList.txt",
-  "buildprogress",  "",
-  "buildmodule",    "MozillaBuildList.pm",
-  "checkouttime",   "Mozilla last checkout"
-);
-#-------------------------------------------------------------
-# end build hashes
-#-------------------------------------------------------------
-
-# set the build root directory, which is the the dir above mozilla
-SetupBuildRootDir(":mozilla:build:mac:build_scripts");
-
-# Set up all the flags on $main::, like DEBUG, CARBON etc.
-# Override the defaults using the preferences files.
-SetupDefaultBuildOptions(0, ":mozilla:dist:viewer:", "");
-
-my($do_checkout)    = 1;
-my($do_build)       = 0;
-
-RunBuild($do_checkout, $do_build, \%inputfiles, $prefs_file_name);

mozilla/build/mac/test/README

@@ -1,4 +0,0 @@
-This directory is merely here to test the project editor server. It will go away after
-it is validated. For more information, see http://camelot.
-
-Testing watchers.

mozilla/build/mac/test/test1.cpp

@@ -1 +0,0 @@
-// test1.cpp

mozilla/build/mac/test/test2.cpp

@@ -1 +0,0 @@
-// test2.cpp

mozilla/build/mac/test/test3.cpp

@@ -1 +0,0 @@
-// test2.cpp

mozilla/build/mac/test/test5.cpp

@@ -1,4 +0,0 @@
-// test2.cpp
-
-as
-dfasdf

mozilla/build/mac/tools/BuildSystemInfo/BuildSystemInfo.cpp

@@ -1,12 +0,0 @@
-#include <stdio.h>
-
-#include <ConditionalMacros.h>
-
-int main(int argc, char* argv[])
-{
-    FILE* file = fopen("BuildSystemInfo.pm", "w");
-    if (file != NULL) {
-        fprintf(file, "$UNIVERSAL_INTERFACES_VERSION=0x%04X;\n", UNIVERSAL_INTERFACES_VERSION);
-        fclose(file);
-    }
-}

mozilla/client.mk

@@ -1,650 +0,0 @@
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Stephen Lamm
-
-# Build the Mozilla client.
-#
-# This needs CVSROOT set to work, e.g.,
-#   setenv CVSROOT :pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
-# or
-#   setenv CVSROOT :pserver:username%somedomain.org@cvs.mozilla.org:/cvsroot
-# 
-# To checkout and build a tree,
-#    1. cvs co mozilla/client.mk
-#    2. cd mozilla
-#    3. gmake -f client.mk
-#
-# Other targets (gmake -f client.mk [targets...]),
-#    checkout
-#    build
-#    clean (realclean is now the same as clean)
-#    distclean
-#
-# See http://www.mozilla.org/build/unix.html for more information.
-#
-# Options:
-#   MOZ_OBJDIR           - Destination object directory
-#   MOZ_CO_DATE          - Date tag to use for checkout (default: none)
-#   MOZ_CO_MODULE        - Module to checkout (default: SeaMonkeyAll)
-#   MOZ_CVS_FLAGS        - Flags to pass cvs (default: -q -z3)
-#   MOZ_CO_FLAGS         - Flags to pass after 'cvs co' (default: -P)
-#   MOZ_MAKE_FLAGS       - Flags to pass to $(MAKE)
-#   MOZ_CO_BRANCH        - Branch tag (Deprecated. Use MOZ_CO_TAG below.)
-#
-
-#######################################################################
-# Checkout Tags
-#
-# For branches, uncomment the MOZ_CO_TAG line with the proper tag,
-# and commit this file on that tag.
-MOZ_CO_TAG = NETSCAPE_7_02_RELEASE
-NSPR_CO_TAG = NETSCAPE_7_02_RELEASE
-PSM_CO_TAG = NETSCAPE_7_02_RELEASE
-NSS_CO_TAG = NETSCAPE_7_02_RELEASE
-LDAPCSDK_CO_TAG = NETSCAPE_7_02_RELEASE
-ACCESSIBLE_CO_TAG = NETSCAPE_7_02_RELEASE
-GFX2_CO_TAG = NETSCAPE_7_02_RELEASE
-IMGLIB2_CO_TAG = NETSCAPE_7_02_RELEASE
-BUILD_MODULES = all
-
-#######################################################################
-# Defines
-#
-CVS = cvs
-
-CWD := $(shell pwd)
-
-ifeq "$(CWD)" "/"
-CWD   := /.
-endif
-
-ifneq (, $(wildcard client.mk))
-# Ran from mozilla directory
-ROOTDIR   := $(shell dirname $(CWD))
-TOPSRCDIR := $(CWD)
-else
-# Ran from mozilla/.. directory (?)
-ROOTDIR   := $(CWD)
-TOPSRCDIR := $(CWD)/mozilla
-endif
-
-# on os2, TOPSRCDIR may have two forward slashes in a row, which doesn't
-#  work;  replace first instance with one forward slash
-TOPSRCDIR := $(shell echo "$(TOPSRCDIR)" | sed -e 's%//%/%')
-
-ifndef TOPSRCDIR_MOZ
-TOPSRCDIR_MOZ=$(TOPSRCDIR)
-endif
-
-# if ROOTDIR equals only drive letter (i.e. "C:"), set to "/"
-DIRNAME := $(shell echo "$(ROOTDIR)" | sed -e 's/^.://')
-ifeq ($(DIRNAME),)
-ROOTDIR := /.
-endif
-
-AUTOCONF := autoconf
-MKDIR := mkdir
-SH := /bin/sh
-ifndef MAKE
-MAKE := gmake
-endif
-
-CONFIG_GUESS_SCRIPT := $(wildcard $(TOPSRCDIR)/build/autoconf/config.guess)
-ifdef CONFIG_GUESS_SCRIPT
-  CONFIG_GUESS = $(shell $(CONFIG_GUESS_SCRIPT))
-else
-  _IS_FIRST_CHECKOUT := 1
-endif
-
-####################################
-# CVS
-
-# Add the CVS root to CVS_FLAGS if needed
-CVS_ROOT_IN_TREE := $(shell cat $(TOPSRCDIR)/CVS/Root 2>/dev/null)
-ifneq ($(CVS_ROOT_IN_TREE),)
-ifneq ($(CVS_ROOT_IN_TREE),$(CVSROOT))
-  CVS_FLAGS := -d $(CVS_ROOT_IN_TREE)
-endif
-endif
-
-CVSCO = $(strip $(CVS) $(CVS_FLAGS) co $(CVS_CO_FLAGS))
-CVSCO_LOGFILE := $(ROOTDIR)/cvsco.log
-CVSCO_LOGFILE := $(shell echo $(CVSCO_LOGFILE) | sed s%//%/%)
-
-ifdef MOZ_CO_TAG
-  CVS_CO_FLAGS := -r $(MOZ_CO_TAG)
-endif
-
-####################################
-# Load mozconfig Options
-
-# See build pages, http://www.mozilla.org/build/unix.html, 
-# for how to set up mozconfig.
-MOZCONFIG_LOADER := mozilla/build/autoconf/mozconfig2client-mk
-MOZCONFIG_FINDER := mozilla/build/autoconf/mozconfig-find 
-MOZCONFIG_MODULES := mozilla/build/unix/modules.mk
-run_for_side_effects := \
-  $(shell cd $(ROOTDIR); \
-     if test "$(_IS_FIRST_CHECKOUT)"; then \
-        $(CVSCO) $(MOZCONFIG_FINDER) $(MOZCONFIG_LOADER) $(MOZCONFIG_MODULES); \
-     else true; \
-     fi; \
-     $(MOZCONFIG_LOADER) $(TOPSRCDIR) mozilla/.mozconfig.mk > mozilla/.mozconfig.out)
-include $(TOPSRCDIR)/.mozconfig.mk
-include $(TOPSRCDIR)/build/unix/modules.mk
-
-####################################
-# Options that may come from mozconfig
-
-# Change CVS flags if anonymous root is requested
-ifdef MOZ_CO_USE_MIRROR
-  CVS_FLAGS := -d :pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
-endif
-
-# MOZ_CVS_FLAGS - Basic CVS flags
-ifeq "$(origin MOZ_CVS_FLAGS)" "undefined"
-  CVS_FLAGS := $(CVS_FLAGS) -q -z 3 
-else
-  CVS_FLAGS := $(MOZ_CVS_FLAGS)
-endif
-
-# This option is deprecated. The best way to have client.mk pull a tag
-# is to set MOZ_CO_TAG (see above) and commit that change on the tag.
-ifdef MOZ_CO_BRANCH
-  $(warning Use MOZ_CO_TAG instead of MOZ_CO_BRANCH)
-  CVS_CO_FLAGS := -r $(MOZ_CO_BRANCH)
-endif
-
-# MOZ_CO_FLAGS - Anything that we should use on all checkouts
-ifeq "$(origin MOZ_CO_FLAGS)" "undefined"
-  CVS_CO_FLAGS := $(CVS_CO_FLAGS) -P
-else
-  CVS_CO_FLAGS := $(CVS_CO_FLAGS) $(MOZ_CO_FLAGS)
-endif
-
-ifdef MOZ_CO_DATE
-  CVS_CO_DATE_FLAGS := -D "$(MOZ_CO_DATE)"
-endif
-
-ifdef MOZ_OBJDIR
-  OBJDIR := $(MOZ_OBJDIR)
-  MOZ_MAKE := $(MAKE) $(MOZ_MAKE_FLAGS) -C $(OBJDIR)
-else
-  OBJDIR := $(TOPSRCDIR)
-  MOZ_MAKE := $(MAKE) $(MOZ_MAKE_FLAGS)
-endif
-
-####################################
-# CVS defines for PSM
-#
-PSM_CO_MODULE= mozilla/security/manager
-PSM_CO_FLAGS := -P -A
-ifdef MOZ_CO_FLAGS
-  PSM_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef PSM_CO_TAG
-  PSM_CO_FLAGS := $(PSM_CO_FLAGS) -r $(PSM_CO_TAG)
-endif
-CVSCO_PSM = $(CVS) $(CVS_FLAGS) co $(PSM_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(PSM_CO_MODULE)
-
-####################################
-# CVS defines for NSS
-#
-NSS_CO_MODULE = mozilla/security/nss \
-		mozilla/security/coreconf \
-		$(NULL)
-
-NSS_CO_FLAGS := -P
-ifdef MOZ_CO_FLAGS
-  NSS_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef NSS_CO_TAG
-   NSS_CO_FLAGS := $(NSS_CO_FLAGS) -r $(NSS_CO_TAG)
-endif
-# Cannot pull static tags by date
-ifeq ($(NSS_CO_TAG),NSS_CLIENT_TAG)
-CVSCO_NSS = $(CVS) $(CVS_FLAGS) co $(NSS_CO_FLAGS) $(NSS_CO_MODULE)
-else
-CVSCO_NSS = $(CVS) $(CVS_FLAGS) co $(NSS_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(NSS_CO_MODULE)
-endif
-
-####################################
-# CVS defines for NSPR
-#
-NSPR_CO_MODULE = mozilla/nsprpub
-NSPR_CO_FLAGS := -P
-ifdef MOZ_CO_FLAGS
-  NSPR_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef NSPR_CO_TAG
-  NSPR_CO_FLAGS := $(NSPR_CO_FLAGS) -r $(NSPR_CO_TAG)
-endif
-# Cannot pull static tags by date
-ifeq ($(NSPR_CO_TAG),NSPRPUB_CLIENT_TAG)
-CVSCO_NSPR = $(CVS) $(CVS_FLAGS) co $(NSPR_CO_FLAGS) $(NSPR_CO_MODULE)
-else
-CVSCO_NSPR = $(CVS) $(CVS_FLAGS) co $(NSPR_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(NSPR_CO_MODULE)
-endif
-
-####################################
-# CVS defines for the C LDAP SDK
-#
-LDAPCSDK_CO_MODULE = mozilla/directory/c-sdk
-LDAPCSDK_CO_FLAGS := -P
-ifdef MOZ_CO_FLAGS
-  LDAPCSDK_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef LDAPCSDK_CO_TAG
-  LDAPCSDK_CO_FLAGS := $(LDAPCSDK_CO_FLAGS) -r $(LDAPCSDK_CO_TAG)
-endif
-CVSCO_LDAPCSDK = $(CVS) $(CVS_FLAGS) co $(LDAPCSDK_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(LDAPCSDK_CO_MODULE)
-
-####################################
-# CVS defines for the C LDAP SDK
-#
-ACCESSIBLE_CO_MODULE = mozilla/accessible
-ACCESSIBLE_CO_FLAGS := -P
-ifdef MOZ_CO_FLAGS
-  ACCESSIBLE_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef ACCESSIBLE_CO_TAG
-  ACCESSIBLE_CO_FLAGS := $(ACCESSIBLE_CO_FLAGS) -r $(ACCESSIBLE_CO_TAG)
-endif
-CVSCO_ACCESSIBLE = $(CVS) $(CVS_FLAGS) co $(ACCESSIBLE_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(ACCESSIBLE_CO_MODULE)
-
-####################################
-# CVS defines for gfx2
-#
-GFX2_CO_MODULE = mozilla/gfx2
-GFX2_CO_FLAGS := -P
-ifdef MOZ_CO_FLAGS
-  GFX2_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef GFX2_CO_TAG
-  GFX2_CO_FLAGS := $(GFX2_CO_FLAGS) -r $(GFX2_CO_TAG)
-endif
-CVSCO_GFX2 = $(CVS) $(CVS_FLAGS) co $(GFX2_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(GFX2_CO_MODULE)
-
-####################################
-# CVS defines for new image library
-#
-IMGLIB2_CO_MODULE = mozilla/modules/libpr0n
-IMGLIB2_CO_FLAGS := -P
-ifdef MOZ_CO_FLAGS
-  IMGLIB2_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef IMGLIB2_CO_TAG
-  IMGLIB2_CO_FLAGS := $(IMGLIB2_CO_FLAGS) -r $(IMGLIB2_CO_TAG)
-endif
-CVSCO_IMGLIB2 = $(CVS) $(CVS_FLAGS) co $(IMGLIB2_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(IMGLIB2_CO_MODULE)
-
-####################################
-# CVS defines for standalone modules
-#
-ifneq ($(BUILD_MODULES),all)
-  MOZ_CO_MODULE := $(filter-out $(NSPRPUB_DIR) security directory/c-sdk, $(BUILD_MODULE_CVS))
-  MOZ_CO_MODULE += allmakefiles.sh client.mk aclocal.m4 configure configure.in
-  MOZ_CO_MODULE += Makefile.in
-  MOZ_CO_MODULE := $(addprefix mozilla/, $(MOZ_CO_MODULE))
-
-  NOSUBDIRS_MODULE := $(addprefix mozilla/, $(BUILD_MODULE_CVS_NS))
-ifneq ($(NOSUBDIRS_MODULE),)
-  CVSCO_NOSUBDIRS := $(CVSCO) -l $(CVS_CO_DATE_FLAGS) $(NOSUBDIRS_MODULE)
-endif
-
-ifeq (,$(filter $(NSPRPUB_DIR), $(BUILD_MODULE_CVS)))
-  CVSCO_NSPR :=
-endif
-ifeq (,$(filter security security/manager, $(BUILD_MODULE_CVS)))
-  CVSCO_PSM :=
-  CVSCO_NSS :=
-endif
-ifeq (,$(filter directory/c-sdk, $(BUILD_MODULE_CVS)))
-  CVSCO_LDAPCSDK :=
-endif
-ifeq (,$(filter accessible, $(BUILD_MODULE_CVS)))
-  CVSCO_ACCESSIBLE :=
-endif
-ifeq (,$(filter gfx2, $(BUILD_MODULE_CVS)))
-  CVSCO_GFX2 :=
-endif
-ifeq (,$(filter modules/libpr0n, $(BUILD_MODULE_CVS)))
-  CVSCO_IMGLIB2 :=
-endif
-endif
-
-####################################
-# CVS defines for SeaMonkey
-#
-ifeq ($(MOZ_CO_MODULE),)
-  MOZ_CO_MODULE := SeaMonkeyAll
-endif
-CVSCO_SEAMONKEY := $(CVSCO) $(CVS_CO_DATE_FLAGS) $(MOZ_CO_MODULE)
-
-####################################
-# CVS defined for libart (pulled and built if MOZ_INTERNAL_LIBART_LGPL is set)
-#
-CVSCO_LIBART := $(CVSCO) $(CVS_CO_DATE_FLAGS) mozilla/other-licenses/libart_lgpl
-
-ifdef MOZ_INTERNAL_LIBART_LGPL
-FASTUPDATE_LIBART := fast_update $(CVSCO_LIBART)
-CHECKOUT_LIBART := cvs_co $(CVSCO_LIBART)
-else
-CHECKOUT_LIBART := true
-FASTUPDATE_LIBART := true
-endif
-
-####################################
-# CVS defines for Calendar (pulled and built if MOZ_CALENDAR is set)
-#
-CVSCO_CALENDAR := $(CVSCO) $(CVS_CO_DATE_FLAGS) mozilla/calendar
-
-ifdef MOZ_CALENDAR
-FASTUPDATE_CALENDAR := fast_update $(CVSCO_CALENDAR)
-CHECKOUT_CALENDAR := cvs_co $(CVSCO_CALENDAR)
-else
-CHECKOUT_CALENDAR := true
-FASTUPDATE_CALENDAR := true
-endif
-
-
-# because some cygwin tools can't handle native dos-drive paths & vice-versa
-# force configure to use a relative path for --srcdir
-# need a better check for win32
-# and we need to get OBJDIR earlier
-ifdef MOZ_TOOLS
-_tmpobjdir := $(shell cygpath -u $(OBJDIR))
-_abs2rel := $(shell cygpath -w $(TOPSRCDIR)/build/unix/abs2rel.pl | sed -e 's|\\|/|g')
-_OBJ2SRCPATH := $(shell $(_abs2rel) $(TOPSRCDIR) $(_tmpobjdir))
-endif 
-
-#######################################################################
-# Rules
-# 
-
-# Print out any options loaded from mozconfig.
-all build checkout clean depend distclean export libs install realclean::
-	@if test -f .mozconfig.out; then \
-	  cat .mozconfig.out; \
-	  rm -f .mozconfig.out; \
-	else true; \
-	fi
-
-ifdef _IS_FIRST_CHECKOUT
-all:: checkout build
-else
-all:: checkout alldep
-endif
-
-# Windows equivalents
-pull_all: checkout
-build_all: build
-build_all_dep: alldep
-build_all_depend: alldep
-clobber clobber_all: clean
-pull_and_build_all: checkout alldep
-
-# Do everything from scratch
-everything: checkout clean build
-
-####################################
-# CVS checkout
-#
-checkout::
-#	@: Backup the last checkout log.
-	@if test -f $(CVSCO_LOGFILE) ; then \
-	  mv $(CVSCO_LOGFILE) $(CVSCO_LOGFILE).old; \
-	else true; \
-	fi
-ifdef RUN_AUTOCONF_LOCALLY
-	@echo "Removing local configures" ; \
-	cd $(ROOTDIR) && \
-	$(RM) -f mozilla/configure mozilla/nsprpub/configure \
-		mozilla/directory/c-sdk/configure
-endif
-	@echo "checkout start: "`date` | tee $(CVSCO_LOGFILE)
-	@echo '$(CVSCO) mozilla/client.mk mozilla/build/unix/modules.mk'; \
-        cd $(ROOTDIR) && \
-	$(CVSCO) mozilla/client.mk mozilla/build/unix/modules.mk
-	@cd $(ROOTDIR) && $(MAKE) -f mozilla/client.mk real_checkout
-
-real_checkout:
-#	@: Start the checkout. Split the output to the tty and a log file. \
-#	 : If it fails, touch an error file because "tee" hides the error.
-	@failed=.cvs-failed.tmp; rm -f $$failed*; \
-	cvs_co() { echo "$$@" ; \
-	  ("$$@" || touch $$failed) 2>&1 | tee -a $(CVSCO_LOGFILE) && \
-	  if test -f $$failed; then false; else true; fi; }; \
-	cvs_co $(CVSCO_NSPR) && \
-	cvs_co $(CVSCO_NSS) && \
-	cvs_co $(CVSCO_PSM) && \
-        cvs_co $(CVSCO_LDAPCSDK) && \
-        cvs_co $(CVSCO_ACCESSIBLE) && \
-        cvs_co $(CVSCO_GFX2) && \
-        cvs_co $(CVSCO_IMGLIB2) && \
-	$(CHECKOUT_CALENDAR) && \
-	$(CHECKOUT_LIBART) && \
-	cvs_co $(CVSCO_SEAMONKEY) && \
-	cvs_co $(CVSCO_NOSUBDIRS)
-	@echo "checkout finish: "`date` | tee -a $(CVSCO_LOGFILE)
-#	@: Check the log for conflicts. ;
-	@conflicts=`egrep "^C " $(CVSCO_LOGFILE)` ;\
-	if test "$$conflicts" ; then \
-	  echo "$(MAKE): *** Conflicts during checkout." ;\
-	  echo "$$conflicts" ;\
-	  echo "$(MAKE): Refer to $(CVSCO_LOGFILE) for full log." ;\
-	  false; \
-	else true; \
-	fi
-ifdef RUN_AUTOCONF_LOCALLY
-	@echo Generating configures using $(AUTOCONF) ; \
-	cd $(TOPSRCDIR) && $(AUTOCONF) && \
-	cd $(TOPSRCDIR)/nsprpub && $(AUTOCONF) && \
-	cd $(TOPSRCDIR)/directory/c-sdk && $(AUTOCONF)
-endif
-
-fast-update:
-#	@: Backup the last checkout log.
-	@if test -f $(CVSCO_LOGFILE) ; then \
-	  mv $(CVSCO_LOGFILE) $(CVSCO_LOGFILE).old; \
-	else true; \
-	fi
-ifdef RUN_AUTOCONF_LOCALLY
-	@echo "Removing local configures" ; \
-	cd $(ROOTDIR) && \
-	$(RM) -f mozilla/configure mozilla/nsprpub/configure \
-		mozilla/directory/c-sdk/configure
-endif
-	@echo "checkout start: "`date` | tee $(CVSCO_LOGFILE)
-	@echo '$(CVSCO) mozilla/client.mk mozilla/build/unix/modules.mk'; \
-        cd $(ROOTDIR) && \
-	$(CVSCO) mozilla/client.mk mozilla/build/unix/modules.mk
-	@cd $(TOPSRCDIR) && \
-	$(MAKE) -f client.mk real_fast-update
-
-real_fast-update:
-#	@: Start the update. Split the output to the tty and a log file. \
-#	 : If it fails, touch an error file because "tee" hides the error.
-	@failed=.fast_update-failed.tmp; rm -f $$failed*; \
-	fast_update() { (config/cvsco-fast-update.pl $$@ || touch $$failed) 2>&1 | tee -a $(CVSCO_LOGFILE) && \
-	  if test -f $$failed; then false; else true; fi; }; \
-	cvs_co() { echo "$$@" ; \
-	  ("$$@" || touch $$failed) 2>&1 | tee -a $(CVSCO_LOGFILE) && \
-	  if test -f $$failed; then false; else true; fi; }; \
-	fast_update $(CVSCO_NSPR) && \
-	cd $(ROOTDIR) && \
-	failed=mozilla/.fast_update-failed.tmp && \
-	cvs_co $(CVSCO_NSS) && \
-	failed=.fast_update-failed.tmp && \
-	cd mozilla && \
-	fast_update $(CVSCO_PSM) && \
-	fast_update $(CVSCO_LDAPCSDK) && \
-	fast_update $(CVSCO_ACCESSIBLE) && \
-	fast_update $(CVSCO_GFX2) && \
-	fast_update $(CVSCO_IMGLIB2) && \
-	$(FASTUPDATE_CALENDAR) && \
-	$(FASTUPDATE_LIBART) && \
-	fast_update $(CVSCO_SEAMONKEY) && \
-	fast_update $(CVSCO_NOSUBDIRS)
-	@echo "fast_update finish: "`date` | tee -a $(CVSCO_LOGFILE)
-#	@: Check the log for conflicts. ;
-	@conflicts=`egrep "^C " $(CVSCO_LOGFILE)` ;\
-	if test "$$conflicts" ; then \
-	  echo "$(MAKE): *** Conflicts during fast-update." ;\
-	  echo "$$conflicts" ;\
-	  echo "$(MAKE): Refer to $(CVSCO_LOGFILE) for full log." ;\
-	  false; \
-	else true; \
-	fi
-ifdef RUN_AUTOCONF_LOCALLY
-	@echo Generating configures using $(AUTOCONF) ; \
-	cd $(TOPSRCDIR) && $(AUTOCONF) && \
-	cd $(TOPSRCDIR)/nsprpub && $(AUTOCONF) && \
-	cd $(TOPSRCDIR)/directory/c-sdk && $(AUTOCONF)
-endif
-
-####################################
-# Web configure
-
-WEBCONFIG_FILE  := $(HOME)/.mozconfig
-
-MOZCONFIG2CONFIGURATOR := build/autoconf/mozconfig2configurator
-webconfig:
-	@cd $(TOPSRCDIR); \
-	url=`$(MOZCONFIG2CONFIGURATOR) $(TOPSRCDIR)`; \
-	echo Running mozilla with the following url: ;\
-	echo ;\
-	echo $$url ;\
-	mozilla -remote "openURL($$url)" || \
-	netscape -remote "openURL($$url)" || \
-	mozilla $$url || \
-	netscape $$url ;\
-	echo ;\
-	echo   1. Fill out the form on the browser. ;\
-	echo   2. Save the results to $(WEBCONFIG_FILE)
-
-#####################################################
-# First Checkout
-
-ifdef _IS_FIRST_CHECKOUT
-# First time, do build target in a new process to pick up new files.
-build::
-	$(MAKE) -f $(TOPSRCDIR)/client.mk build
-else
-
-#####################################################
-# After First Checkout
-
-
-####################################
-# Configure
-
-CONFIG_STATUS := $(wildcard $(OBJDIR)/config.status)
-CONFIG_CACHE  := $(wildcard $(OBJDIR)/config.cache)
-
-ifdef RUN_AUTOCONF_LOCALLY
-EXTRA_CONFIG_DEPS := \
-	$(TOPSRCDIR)/aclocal.m4 \
-	$(wildcard $(TOPSRCDIR)/build/autoconf/*.m4) \
-	$(NULL)
-
-$(TOPSRCDIR)/configure: $(TOPSRCDIR)/configure.in $(EXTRA_CONFIG_DEPS)
-	@echo Generating $@ using autoconf
-	cd $(TOPSRCDIR); $(AUTOCONF)
-endif
-
-CONFIG_STATUS_DEPS_L10N := $(wildcard $(TOPSRCDIR)/l10n/makefiles.all)
-
-CONFIG_STATUS_DEPS := \
-	$(TOPSRCDIR)/configure \
-	$(TOPSRCDIR)/allmakefiles.sh \
-	$(TOPSRCDIR)/.mozconfig.mk \
-	$(wildcard $(TOPSRCDIR)/nsprpub/configure) \
-	$(wildcard $(TOPSRCDIR)/directory/c-sdk/configure) \
-	$(wildcard $(TOPSRCDIR)/mailnews/makefiles) \
-	$(CONFIG_STATUS_DEPS_L10N) \
-	$(wildcard $(TOPSRCDIR)/themes/makefiles) \
-	$(NULL)
-
-# configure uses the program name to determine @srcdir@. Calling it without
-#   $(TOPSRCDIR) will set @srcdir@ to "."; otherwise, it is set to the full
-#   path of $(TOPSRCDIR).
-ifeq ($(TOPSRCDIR),$(OBJDIR))
-  CONFIGURE := ./configure
-else
-  CONFIGURE := $(TOPSRCDIR)/configure
-endif
-
-ifdef _OBJ2SRCPATH
-CONFIGURE_ARGS := --srcdir=$(_OBJ2SRCPATH) $(CONFIGURE_ARGS)
-endif
-
-$(OBJDIR)/Makefile $(OBJDIR)/config.status: $(CONFIG_STATUS_DEPS)
-	@if test ! -d $(OBJDIR); then $(MKDIR) $(OBJDIR); else true; fi
-	@echo cd $(OBJDIR);
-	@echo $(CONFIGURE) $(CONFIGURE_ARGS)
-	@cd $(OBJDIR) && $(CONFIGURE_ENV_ARGS) $(CONFIGURE) $(CONFIGURE_ARGS) \
-	  || ( echo "*** Fix above errors and then restart with\
-               \"$(MAKE) -f client.mk build\"" && exit 1 )
-	@touch $(OBJDIR)/Makefile
-
-ifdef CONFIG_STATUS
-$(OBJDIR)/config/autoconf.mk: $(TOPSRCDIR)/config/autoconf.mk.in
-	cd $(OBJDIR); \
-	  CONFIG_FILES=config/autoconf.mk ./config.status
-endif
-
-
-####################################
-# Depend
-
-depend:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
-	$(MOZ_MAKE) export && $(MOZ_MAKE) depend
-
-####################################
-# Build it
-
-build::  $(OBJDIR)/Makefile $(OBJDIR)/config.status
-	$(MOZ_MAKE)
-
-####################################
-# Other targets
-
-# Pass these target onto the real build system
-install export libs clean realclean distclean alldep:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
-	$(MOZ_MAKE) $@
-
-cleansrcdir:
-	@cd $(TOPSRCDIR); \
-        if [ -f webshell/embed/gtk/Makefile ]; then \
-          $(MAKE) -C webshell/embed/gtk distclean; \
-        fi; \
-	if [ -f Makefile ]; then \
-	  $(MAKE) distclean ; \
-	else \
-	  echo "Removing object files from srcdir..."; \
-	  rm -fr `find . -type d \( -name .deps -print -o -name CVS \
-	          -o -exec test ! -d {}/CVS \; \) -prune \
-	          -o \( -name '*.[ao]' -o -name '*.so' \) -type f -print`; \
-	   build/autoconf/clean-config.sh; \
-	fi;
-
-# (! IS_FIRST_CHECKOUT)
-endif
-
-.PHONY: checkout real_checkout depend build export libs alldep install clean realclean distclean cleansrcdir pull_all build_all clobber clobber_all pull_and_build_all everything

mozilla/webtools/bugzilla/Attachment.pm

@@ -0,0 +1,97 @@
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Terry Weissman <terry@mozilla.org>
+#                 Myk Melez <myk@mozilla.org>
+
+############################################################################
+# Module Initialization
+############################################################################
+
+use diagnostics;
+use strict;
+
+package Attachment;
+
+# This module requires that its caller have said "require CGI.pl" to import
+# relevant functions from that script and its companion globals.pl.
+
+############################################################################
+# Functions
+############################################################################
+
+sub query
+{
+  # Retrieves and returns an array of attachment records for a given bug. 
+  # This data should be given to attachment/list.atml in an
+  # "attachments" variable.
+  my ($bugid) = @_;
+
+  my $in_editbugs = &::UserInGroup("editbugs");
+
+  # Retrieve a list of attachments for this bug and write them into an array
+  # of hashes in which each hash represents a single attachment.
+  &::SendSQL("
+              SELECT attach_id, creation_ts, mimetype, description, ispatch, 
+               isobsolete, submitter_id 
+              FROM attachments WHERE bug_id = $bugid ORDER BY attach_id
+            ");
+  my @attachments = ();
+  while (&::MoreSQLData()) {
+    my %a;
+    my $submitter_id;
+    ($a{'attachid'}, $a{'date'}, $a{'contenttype'}, $a{'description'},
+     $a{'ispatch'}, $a{'isobsolete'}, $submitter_id) = &::FetchSQLData();
+
+    # Format the attachment's creation/modification date into a standard
+    # format (YYYY-MM-DD HH:MM)
+    if ($a{'date'} =~ /^(\d\d\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)$/) {
+        $a{'date'} = "$1-$2-$3 $4:$5";
+    }
+
+    # Retrieve a list of status flags that have been set on the attachment.
+    &::PushGlobalSQLState();
+    &::SendSQL(" 
+                SELECT   name 
+                FROM     attachstatuses, attachstatusdefs 
+                WHERE    attach_id = $a{'attachid'} 
+                AND      attachstatuses.statusid = attachstatusdefs.id
+                ORDER BY sortkey
+              ");
+    my @statuses = ();
+    while (&::MoreSQLData()) { 
+      my ($status) = &::FetchSQLData(); 
+      push @statuses , $status;
+    }
+    $a{'statuses'} = \@statuses;
+    &::PopGlobalSQLState();
+
+    # We will display the edit link if the user can edit the attachment;
+    # ie the are the submitter, or they have canedit.
+    # Also show the link if the user is not logged in - in that cae,
+    # They'll be prompted later
+    $a{'canedit'} = ($::userid == 0 || $submitter_id == $::userid ||
+                     $in_editbugs);
+    push @attachments, \%a;
+  }
+  
+  return \@attachments;  
+}
+
+1;

mozilla/webtools/bugzilla/Bug.pm

@@ -0,0 +1,547 @@
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Dawn Endico    <endico@mozilla.org>
+#                 Terry Weissman <terry@mozilla.org>
+#                 Chris Yeh      <cyeh@bluemartini.com>
+
+use diagnostics;
+use strict;
+
+use DBI;
+use RelationSet;
+use vars qw($unconfirmedstate $legal_keywords);
+require "globals.pl";
+require "CGI.pl";
+package Bug;
+use CGI::Carp qw(fatalsToBrowser);
+my %ok_field;
+
+for my $key (qw (bug_id product version rep_platform op_sys bug_status 
+                resolution priority bug_severity component assigned_to
+                reporter bug_file_loc short_desc target_milestone 
+                qa_contact status_whiteboard creation_ts groupset 
+                delta_ts votes whoid usergroupset comment query error) ){
+    $ok_field{$key}++;
+    }
+
+# create a new empty bug
+#
+sub new {
+  my $type = shift();
+  my %bug;
+
+  # create a ref to an empty hash and bless it
+  #
+  my $self = {%bug};
+  bless $self, $type;
+
+  # construct from a hash containing a bug's info
+  #
+  if ($#_ == 1) {
+    $self->initBug(@_);
+  } else {
+    confess("invalid number of arguments \($#_\)($_)");
+  }
+
+  # bless as a Bug
+  #
+  return $self;
+}
+
+
+
+# dump info about bug into hash unless user doesn't have permission
+# user_id 0 is used when person is not logged in.
+#
+sub initBug  {
+  my $self = shift();
+  my ($bug_id, $user_id) = (@_);
+
+  my $old_bug_id = $bug_id;
+  if ((! defined $bug_id) || (!$bug_id) || (!&::detaint_natural($bug_id))) {
+      # no bug number given
+      $self->{'bug_id'} = $old_bug_id;
+      $self->{'error'} = "InvalidBugId";
+      return $self;
+  }
+
+# default userid 0, or get DBID if you used an email address
+  unless (defined $user_id) {
+    $user_id = 0;
+  }
+  else {
+     if ($user_id =~ /^\@/) {
+        $user_id = &::DBname_to_id($user_id); 
+     }
+  }
+     
+
+  &::ConnectToDatabase();
+  &::GetVersionTable();
+
+  # this verification should already have been done by caller
+  # my $loginok = quietly_check_login();
+
+
+  $self->{'whoid'} = $user_id;
+  &::SendSQL("SELECT groupset FROM profiles WHERE userid=$self->{'whoid'}");
+  my $usergroupset = &::FetchOneColumn();
+  if (!$usergroupset) { $usergroupset = '0' }
+  $self->{'usergroupset'} = $usergroupset;
+
+  # Check to see if we can see this bug
+  if (!&::CanSeeBug($bug_id, $user_id, $usergroupset)) {
+      # Permission denied to see bug 
+      $self->{'bug_id'} = $old_bug_id;
+      $self->{'error'} = "PermissionDenied";
+      return $self;
+  }
+
+    my $query = "";
+    if ($::driver eq 'mysql') {
+        $query = "
+    select
+      bugs.bug_id, product, version, rep_platform, op_sys, bug_status,
+      resolution, priority, bug_severity, component, assigned_to, reporter,
+      bug_file_loc, short_desc, target_milestone, qa_contact,
+      status_whiteboard, date_format(creation_ts,'%Y-%m-%d %H:%i'),
+      groupset, delta_ts, sum(votes.count)
+    from bugs left join votes using(bug_id)
+    where bugs.bug_id = $bug_id
+    group by bugs.bug_id";
+    } elsif ($::driver eq 'Pg') {
+        $query = "
+    select
+      bugs.bug_id, product, version, rep_platform, op_sys, bug_status,
+      resolution, priority, bug_severity, component, assigned_to, reporter,
+      bug_file_loc, short_desc, target_milestone, qa_contact,
+      status_whiteboard, creation_ts,
+      groupset, delta_ts, sum(votes.count)
+    from bugs left join votes using(bug_id)
+    where bugs.bug_id = $bug_id
+    and (bugs.groupset & int8($usergroupset)) = bugs.groupset
+    group by bugs.bug_id, product, version, rep_platform, op_sys, bug_status,
+         resolution, priority, bug_severity, component, assigned_to, reporter,
+         bug_file_loc, short_desc, target_milestone, qa_contact, status_whiteboard,
+         creation_ts, groupset, delta_ts";
+    }
+
+  &::SendSQL($query);
+  my @row;
+
+  if (@row = &::FetchSQLData()) {
+    my $count = 0;
+    my %fields;
+    foreach my $field ("bug_id", "product", "version", "rep_platform",
+                       "op_sys", "bug_status", "resolution", "priority",
+                       "bug_severity", "component", "assigned_to", "reporter",
+                       "bug_file_loc", "short_desc", "target_milestone",
+                       "qa_contact", "status_whiteboard", "creation_ts",
+                       "groupset", "delta_ts", "votes") {
+        $fields{$field} = shift @row;
+        if ($fields{$field}) {
+            $self->{$field} = $fields{$field};
+        }
+        $count++;
+    }
+  } else {
+    &::SendSQL("select groupset from bugs where bug_id = $bug_id");
+    if (@row = &::FetchSQLData()) {
+      $self->{'bug_id'} = $bug_id;
+      $self->{'error'} = "NotPermitted";
+      return $self;
+    } else {
+      $self->{'bug_id'} = $bug_id;
+      $self->{'error'} = "NotFound";
+      return $self;
+    }
+  }
+
+  $self->{'assigned_to'} = &::DBID_to_name($self->{'assigned_to'});
+  $self->{'reporter'} = &::DBID_to_name($self->{'reporter'});
+
+  my $ccSet = new RelationSet;
+  $ccSet->mergeFromDB("select who from cc where bug_id=$bug_id");
+  my @cc = $ccSet->toArrayOfStrings();
+  if (@cc) {
+    $self->{'cc'} = \@cc;
+  }
+
+  if (&::Param("useqacontact") && (defined $self->{'qa_contact'}) ) {
+    my $name = $self->{'qa_contact'} > 0 ? &::DBID_to_name($self->{'qa_contact'}) :"";
+    if ($name) {
+      $self->{'qa_contact'} = $name;
+    }
+  }
+
+  if (@::legal_keywords) {
+    &::SendSQL("SELECT keyworddefs.name 
+              FROM keyworddefs, keywords
+             WHERE keywords.bug_id = $bug_id 
+               AND keyworddefs.id = keywords.keywordid
+          ORDER BY keyworddefs.name");
+    my @list;
+    while (&::MoreSQLData()) {
+        push(@list, &::FetchOneColumn());
+    }
+    if (@list) {
+      $self->{'keywords'} = join(', ', @list);
+    }
+  }
+
+  &::SendSQL("select attach_id, creation_ts, description 
+           from attachments 
+           where bug_id = $bug_id");
+  my @attachments;
+  while (&::MoreSQLData()) {
+    my ($attachid, $date, $desc) = (&::FetchSQLData());
+    if ($date =~ /^(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)$/) {
+        $date = "$3/$4/$2 $5:$6";
+      my %attach;
+      $attach{'attachid'} = $attachid;
+      $attach{'date'} = $date;
+      $attach{'desc'} = $desc;
+      push @attachments, \%attach;
+    }
+  }
+  if (@attachments) {
+    $self->{'attachments'} = \@attachments;
+  }
+
+  &::SendSQL("select bug_id, who, bug_when, thetext 
+           from longdescs 
+           where bug_id = $bug_id");
+  my @longdescs;
+  while (&::MoreSQLData()) {
+    my ($bug_id, $who, $bug_when, $thetext) = (&::FetchSQLData());
+    my %longdesc;
+    $longdesc{'who'} = $who;
+    $longdesc{'bug_when'} = $bug_when;
+    $longdesc{'thetext'} = $thetext;
+    push @longdescs, \%longdesc;
+  }
+  if (@longdescs) {
+    $self->{'longdescs'} = \@longdescs;
+  }
+
+  if (&::Param("usedependencies")) {
+    my @depends = EmitDependList("blocked", "dependson", $bug_id);
+    if ( @depends ) {
+      $self->{'dependson'} = \@depends;
+    }
+    my @blocks = EmitDependList("dependson", "blocked", $bug_id);
+    if ( @blocks ) {
+      $self->{'blocks'} = \@blocks;
+    }
+  }
+
+  return $self;
+}
+
+
+
+# given a bug hash, emit xml for it. with file header provided by caller
+#
+sub emitXML {
+  ( $#_ == 0 ) || confess("invalid number of arguments");
+  my $self = shift();
+  my $xml;
+
+
+  if (exists $self->{'error'}) {
+    $xml .= "<bug error=\"$self->{'error'}\">\n";
+    $xml .= "  <bug_id>$self->{'bug_id'}</bug_id>\n";
+    $xml .= "</bug>\n";
+    return $xml;
+  }
+
+  $xml .= "<bug>\n";
+
+  foreach my $field ("bug_id", "bug_status", "product",
+      "priority", "version", "rep_platform", "assigned_to", "delta_ts", 
+      "component", "reporter", "target_milestone", "bug_severity", 
+      "creation_ts", "qa_contact", "op_sys", "resolution", "bug_file_loc",
+      "short_desc", "keywords", "status_whiteboard") {
+    if ($self->{$field}) {
+      $xml .= "  <$field>" . QuoteXMLChars($self->{$field}) . "</$field>\n";
+    }
+  }
+
+  foreach my $field ("dependson", "blocks", "cc") {
+    if (defined $self->{$field}) {
+      for (my $i=0 ; $i < @{$self->{$field}} ; $i++) {
+        $xml .= "  <$field>" . $self->{$field}[$i] . "</$field>\n";
+      }
+    }
+  }
+
+  if (defined $self->{'longdescs'}) {
+    for (my $i=0 ; $i < @{$self->{'longdescs'}} ; $i++) {
+      $xml .= "  <long_desc>\n"; 
+      $xml .= "   <who>" . &::DBID_to_name($self->{'longdescs'}[$i]->{'who'}) 
+                         . "</who>\n"; 
+      $xml .= "   <bug_when>" . $self->{'longdescs'}[$i]->{'bug_when'} 
+                              . "</bug_when>\n"; 
+      $xml .= "   <thetext>" . QuoteXMLChars($self->{'longdescs'}[$i]->{'thetext'})
+                             . "</thetext>\n"; 
+      $xml .= "  </long_desc>\n"; 
+    }
+  }
+
+  if (defined $self->{'attachments'}) {
+    for (my $i=0 ; $i < @{$self->{'attachments'}} ; $i++) {
+      $xml .= "  <attachment>\n"; 
+      $xml .= "    <attachid>" . $self->{'attachments'}[$i]->{'attachid'}
+                              . "</attachid>\n"; 
+      $xml .= "    <date>" . $self->{'attachments'}[$i]->{'date'} . "</date>\n"; 
+      $xml .= "    <desc>" . QuoteXMLChars($self->{'attachments'}[$i]->{'desc'}) . "</desc>\n"; 
+    # $xml .= "    <type>" . $self->{'attachments'}[$i]->{'type'} . "</type>\n"; 
+    # $xml .= "    <data>" . $self->{'attachments'}[$i]->{'data'} . "</data>\n"; 
+      $xml .= "  </attachment>\n"; 
+    }
+  }
+
+  $xml .= "</bug>\n";
+  return $xml;
+}
+
+sub EmitDependList {
+  my ($myfield, $targetfield, $bug_id) = (@_);
+  my @list;
+  &::SendSQL("select dependencies.$targetfield, bugs.bug_status
+           from dependencies, bugs
+           where dependencies.$myfield = $bug_id
+             and bugs.bug_id = dependencies.$targetfield
+           order by dependencies.$targetfield");
+  while (&::MoreSQLData()) {
+    my ($i, $stat) = (&::FetchSQLData());
+    push @list, $i;
+  }
+  return @list;
+}
+
+sub QuoteXMLChars {
+  $_[0] =~ s/&/&amp;/g;
+  $_[0] =~ s/</&lt;/g;
+  $_[0] =~ s/>/&gt;/g;
+  $_[0] =~ s/'/&apos;/g;
+  $_[0] =~ s/"/&quot;/g;
+# $_[0] =~ s/([\x80-\xFF])/&XmlUtf8Encode(ord($1))/ge;
+  return($_[0]);
+}
+
+sub XML_Header {
+  my ($urlbase, $version, $maintainer, $exporter) = (@_);
+
+  my $xml;
+  $xml = "<?xml version=\"1.0\" standalone=\"yes\"?>\n";
+  $xml .= "<!DOCTYPE bugzilla SYSTEM \"$urlbase";
+  if (! ($urlbase =~ /.+\/$/)) {
+    $xml .= "/";
+  }
+  $xml .= "bugzilla.dtd\">\n";
+  $xml .= "<bugzilla";
+  if (defined $exporter) {
+    $xml .= " exporter=\"$exporter\"";
+  }
+  $xml .= " version=\"$version\"";
+  $xml .= " urlbase=\"$urlbase\"";
+  $xml .= " maintainer=\"$maintainer\">\n";
+  return ($xml);
+}
+
+
+sub XML_Footer {
+  return ("</bugzilla>\n");
+}
+
+sub UserInGroup {
+    my $self = shift();
+    my ($groupname) = (@_);
+    if ($self->{'usergroupset'} eq "0") {
+        return 0;
+    }
+    &::ConnectToDatabase();
+    &::SendSQL("select (group_bit & int8($self->{'usergroupset'})) != 0 from groups where name = " 
+           . &::SqlQuote($groupname));
+    my $bit = &::FetchOneColumn();
+    if ($bit) {
+        return 1;
+    }
+    return 0;
+}
+
+sub CanChangeField {
+   my $self = shift();
+   my ($f, $oldvalue, $newvalue) = (@_);
+   my $UserInEditGroupSet = -1;
+   my $UserInCanConfirmGroupSet = -1;
+   my $ownerid;
+   my $reporterid;
+   my $qacontactid;
+
+    if ($f eq "assigned_to" || $f eq "reporter" || $f eq "qa_contact") {
+        if ($oldvalue =~ /^\d+$/) {
+            if ($oldvalue == 0) {
+                $oldvalue = "";
+            } else {
+                $oldvalue = &::DBID_to_name($oldvalue);
+            }
+        }
+    }
+    if ($oldvalue eq $newvalue) {
+        return 1;
+    }
+    if (&::trim($oldvalue) eq &::trim($newvalue)) {
+        return 1;
+    }
+    if ($f =~ /^longdesc/) {
+        return 1;
+    }
+    if ($UserInEditGroupSet < 0) {
+        $UserInEditGroupSet = UserInGroup($self, "editbugs");
+    }
+    if ($UserInEditGroupSet) {
+        return 1;
+    }
+    &::SendSQL("SELECT reporter, assigned_to, qa_contact FROM bugs " .
+                "WHERE bug_id = $self->{'bug_id'}");
+    ($reporterid, $ownerid, $qacontactid) = (&::FetchSQLData());
+
+    # Let reporter change bug status, even if they can't edit bugs.
+    # If reporter can't re-open their bug they will just file a duplicate.
+    # While we're at it, let them close their own bugs as well.
+    if ( ($f eq "bug_status") && ($self->{'whoid'} eq $reporterid) ) {
+        return 1;
+    }
+    if ($f eq "bug_status" && $newvalue ne $::unconfirmedstate &&
+        &::IsOpenedState($newvalue)) {
+
+        # Hmm.  They are trying to set this bug to some opened state
+        # that isn't the UNCONFIRMED state.  Are they in the right
+        # group?  Or, has it ever been confirmed?  If not, then this
+        # isn't legal.
+
+        if ($UserInCanConfirmGroupSet < 0) {
+            $UserInCanConfirmGroupSet = &::UserInGroup("canconfirm");
+        }
+        if ($UserInCanConfirmGroupSet) {
+            return 1;
+        }
+        &::SendSQL("SELECT everconfirmed FROM bugs WHERE bug_id = $self->{'bug_id'}");
+        my $everconfirmed = FetchOneColumn();
+        if ($everconfirmed) {
+            return 1;
+        }
+    } elsif ($reporterid eq $self->{'whoid'} || $ownerid eq $self->{'whoid'} ||
+             $qacontactid eq $self->{'whoid'}) {
+        return 1;
+    }
+    $self->{'error'} = "
+Only the owner or submitter of the bug, or a sufficiently
+empowered user, may make that change to the $f field."
+}
+
+sub Collision {
+    my $self = shift();
+    my $write = "WRITE";        # Might want to make a param to control
+                                # whether we do LOW_PRIORITY ...
+    if ($::driver eq 'mysql') {
+        &::SendSQL("LOCK TABLES bugs $write, bugs_activity $write, cc $write, " .
+                "cc AS selectVisible_cc $write, " .
+                "profiles $write, dependencies $write, votes $write, " .
+                "keywords $write, longdescs $write, fielddefs $write, " .
+                "keyworddefs READ, groups READ, attachments READ, products READ");
+    } 
+    &::SendSQL("SELECT delta_ts FROM bugs where bug_id=$self->{'bug_id'}");
+    my $delta_ts = &::FetchOneColumn();
+    if ($::driver eq 'mysql') {
+        &::SendSQL("unlock tables");
+    }
+    if ($self->{'delta_ts'} ne $delta_ts) {
+       return 1;
+    }
+    else {
+       return 0;
+    }
+}
+
+sub AppendComment  {
+    my $self = shift();
+    my ($comment) = (@_);
+    $comment =~ s/\r\n/\n/g;     # Get rid of windows-style line endings.
+    $comment =~ s/\r/\n/g;       # Get rid of mac-style line endings.
+    if ($comment =~ /^\s*$/) {  # Nothin' but whitespace.
+        return;
+    }
+
+    &::SendSQL("INSERT INTO longdescs (bug_id, who, bug_when, thetext) " .
+            "VALUES($self->{'bug_id'}, $self->{'whoid'}, now(), " . &::SqlQuote($comment) . ")");
+
+    &::SendSQL("UPDATE bugs SET delta_ts = now() WHERE bug_id = $self->{'bug_id'}");
+}
+
+
+#from o'reilley's Programming Perl
+sub display {
+    my $self = shift;
+    my @keys;
+    if (@_ == 0) {                  # no further arguments
+        @keys = sort keys(%$self);
+    }  else {
+        @keys = @_;                 # use the ones given
+    }
+    foreach my $key (@keys) {
+        print "\t$key => $self->{$key}\n";
+    }
+}
+
+sub CommitChanges {
+
+#snapshot bug
+#snapshot dependencies
+#check can change fields
+#check collision
+#lock and change fields
+#notify through mail
+
+}
+
+sub AUTOLOAD {
+  use vars qw($AUTOLOAD);
+  my $self = shift;
+  my $type = ref($self) || $self;
+  my $attr = $AUTOLOAD;
+
+  $attr =~ s/.*:://;
+  return unless $attr=~ /[^A-Z]/;
+  if (@_) {
+    $self->{$attr} = shift;
+    return;
+  }
+  confess ("invalid bug attribute $attr") unless $ok_field{$attr};
+  if (defined $self->{$attr}) {
+    return $self->{$attr};
+  } else {
+    return '';
+  }
+}
+
+1;

mozilla/webtools/bugzilla/README

@@ -0,0 +1,16 @@
+* This README is no longer used to house installation instructions.  Instead,
+it contains pointers to where you may find the information you need.
+
+* Installation instructions are now found in docs/, with a variety of document
+types available.  Please refer to these documents when installing, configuring,
+and maintaining your Bugzilla installation.  A helpful starting point is
+docs/txt/Bugzilla-Guide.txt, or with a web browser at docs/html/index.html.
+
+* Release notes for people upgrading to a new version of Bugzilla are
+available at docs/rel_notes.txt.
+
+* If you wish to contribute to the documentation, please read docs/README.docs.
+
+* The Bugzilla web site is at "http://www.mozilla.org/projects/bugzilla/".
+This site will contain the latest Bugzilla information, including how to
+report bugs and how to get help with Bugzilla.

mozilla/webtools/bugzilla/RelationSet.pm

@@ -0,0 +1,268 @@
+# 
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+# 
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+# 
+# The Original Code is the Bugzilla Bug Tracking System.
+# 
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 2000 Netscape Communications Corporation.  All
+# Rights Reserved.
+# 
+# Contributor(s): Dan Mosedale <dmose@mozilla.org>
+#                 Terry Weissman <terry@mozilla.org>
+#                 Dave Miller <justdave@syndicomm.com>
+
+# This object models a set of relations between one item and a group
+# of other items.  An example is the set of relations between one bug
+# and the users CCed on that bug.  Currently, the relation objects are
+# expected to be bugzilla userids.  However, this could and perhaps
+# should be generalized to work with non userid objects, such as
+# keywords associated with a bug.  That shouldn't be hard to do; it
+# might involve turning this into a virtual base class, and having
+# UserSet and KeywordSet types that inherit from it.
+
+use diagnostics;
+use strict;
+
+# Everything that uses RelationSet should already have globals.pl loaded
+# so we don't want to load it here.  Doing so causes a loop in Perl because
+# globals.pl turns around and does a 'use RelationSet'
+# See http://bugzilla.mozilla.org/show_bug.cgi?id=72862
+#require "globals.pl";
+
+package RelationSet;
+use CGI::Carp qw(fatalsToBrowser);
+
+# create a new empty RelationSet
+#
+sub new {
+  my $type = shift();
+
+  # create a ref to an empty hash and bless it
+  #
+  my $self = {};
+  bless $self, $type;
+
+  # construct from a comma-delimited string
+  # 
+  if ($#_ == 0) {
+    $self->mergeFromString($_[0]);
+  }
+  # unless this was a constructor for an empty list, somebody screwed up.
+  #
+  elsif ( $#_ != -1 ) {
+    confess("invalid number of arguments");
+  }
+
+  # bless as a RelationSet
+  #
+  return $self;
+}
+
+# Assumes that the set of relations "FROM $table WHERE $constantSql and 
+# $column = $value" is currently represented by $self, and this set should
+# be updated to look like $other.  
+#
+# Returns an array of two strings, one INSERT and one DELETE, which will
+# make this change.  Either or both strings may be the empty string,
+# meaning that no INSERT or DELETE or both (respectively) need to be done.
+#
+# THE CALLER IS RESPONSIBLE FOR ANY DESIRED LOCKING AND/OR CONSISTENCY 
+# CHECKS (not to mention doing the SendSQL() calls).
+#
+sub generateSqlDeltas {
+  ($#_ == 5) || confess("invalid number of arguments");
+  my ( $self, # instance ptr to set representing the existing state
+       $endState, # instance ptr to set representing the desired state
+       $table, # table where these relations are kept
+       $invariantName, # column held const for a RelationSet (often "bug_id")
+       $invariantValue, # what to hold the above column constant at
+       $columnName # the column which varies (often a userid)
+     ) = @_;
+
+  # construct the insert list by finding relations which exist in the
+  # end state but not the current state.
+  #
+  my @endStateRelations = keys(%$endState);
+  my @insertList = ();
+  foreach ( @endStateRelations ) {
+    push ( @insertList, $_ ) if ( ! exists $$self{"$_"} );
+  }
+
+  # we've built the list.  If it's non-null, add required sql chrome.
+  #
+  my $sqlInsert="";
+  if ( $#insertList > -1 ) {
+    $sqlInsert = "INSERT INTO $table ($invariantName, $columnName) VALUES " .
+      join (",", 
+            map ( "($invariantValue, $_)" , @insertList ) 
+           );
+  }
+     
+  # construct the delete list by seeing which relations exist in the
+  # current state but not the end state
+  #
+  my @selfRelations = keys(%$self);
+  my @deleteList = ();
+  foreach ( @selfRelations ) {
+    push (@deleteList, $_) if ( ! exists $$endState{"$_"} );
+  }
+
+  # we've built the list.  if it's non-empty, add required sql chrome.
+  #
+  my $sqlDelete = "";
+  if ( $#deleteList > -1 ) {
+    $sqlDelete = "DELETE FROM $table WHERE $invariantName = $invariantValue " .
+      "AND $columnName IN ( " . join (",", @deleteList) . " )";
+  } 
+
+  return ($sqlInsert, $sqlDelete);
+}
+
+# compare the current object with another.  
+#
+sub isEqual {
+  ($#_ == 1) || confess("invalid number of arguments");
+  my $self = shift();
+  my $other = shift();
+
+  # get arrays of the keys for faster processing
+  #
+  my @selfRelations = keys(%$self);
+  my @otherRelations = keys(%$other);
+ 
+  # make sure the arrays are the same size
+  #
+  return 0 if ( $#selfRelations != $#otherRelations );
+
+  # bail out if any of the elements are different
+  #
+  foreach my $relation ( @selfRelations ) {
+    return 0 if ( !exists $$other{$relation})
+  }
+
+  # we made it!
+  #
+  return 1;
+
+}
+
+# merge the results of a SQL command into this set
+#
+sub mergeFromDB {
+  ( $#_ == 1 ) || confess("invalid number of arguments");
+  my $self = shift();
+
+  &::SendSQL(shift());
+  while (my @row = &::FetchSQLData()) {
+    $$self{$row[0]} = 1;
+  }
+
+  return;
+}
+
+# merge a set in string form into this set
+#
+sub mergeFromString {
+  ($#_ == 1) || confess("invalid number of arguments");
+  my $self = shift();
+
+  # do the merge
+  #
+  foreach my $person (split(/[ ,]/, shift())) {
+    if ($person ne "") {
+      $$self{&::DBNameToIdAndCheck($person)} = 1;
+    }
+  }
+}
+
+# remove a set in string form from this set
+#
+sub removeItemsInString {
+  ($#_ == 1) || confess("invalid number of arguments");
+  my $self = shift();
+
+  # do the merge
+  #
+  foreach my $person (split(/[ ,]/, shift())) {
+    if ($person ne "") {
+      my $dbid = &::DBNameToIdAndCheck($person);
+      if (exists $$self{$dbid}) {
+        delete $$self{$dbid};
+      }
+    }
+  }
+}
+
+# remove a set in array form from this set
+#
+sub removeItemsInArray {
+  ($#_ > 0) || confess("invalid number of arguments");
+  my $self = shift();
+
+  # do the merge
+  #
+  while (my $person = shift()) {
+    if ($person ne "") {
+      my $dbid = &::DBNameToIdAndCheck($person);
+      if (exists $$self{$dbid}) {
+        delete $$self{$dbid};
+      }
+    }
+  }
+}
+
+# return the number of elements in this set
+#
+sub size {
+  my $self = shift();
+
+  my @k = keys(%$self);
+  return $#k++;
+}
+
+# return this set in array form
+#
+sub toArray {
+  my $self= shift();
+
+  return keys(%$self);
+}
+
+# return this set as an array of strings
+#
+sub toArrayOfStrings {
+  ($#_ == 0) || confess("invalid number of arguments");
+  my $self = shift();
+
+  my @result = ();
+  foreach my $i ( keys %$self ) {
+    push @result, &::DBID_to_name($i);
+  }
+
+  return sort { lc($a) cmp lc($b) } @result;
+}  
+
+# return this set in string form (comma-separated and sorted)
+#
+sub toString {
+  ($#_ == 0) || confess("invalid number of arguments");
+  my $self = shift();
+
+  my @result = ();
+  foreach my $i ( keys %$self ) {
+    push @result, &::DBID_to_name($i);
+  }
+
+  return join(',', sort(@result));
+}  
+
+1;

mozilla/webtools/bugzilla/Token.pm

@@ -0,0 +1,273 @@
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s):    Myk Melez <myk@mozilla.org>
+
+################################################################################
+# Module Initialization
+################################################################################
+
+# Make it harder for us to do dangerous things in Perl.
+use diagnostics;
+use strict;
+
+# Bundle the functions in this file together into the "Token" package.
+package Token;
+
+use Date::Format;
+
+# This module requires that its caller have said "require CGI.pl" to import
+# relevant functions from that script and its companion globals.pl.
+
+################################################################################
+# Constants
+################################################################################
+
+# The maximum number of days a token will remain valid.
+my $maxtokenage = 3;
+
+################################################################################
+# Functions
+################################################################################
+
+sub IssueEmailChangeToken {
+    my ($userid, $old_email, $new_email) = @_;
+
+    my $token_ts = time();
+    my $issuedate = time2str("%Y-%m-%d %H:%M", $token_ts);
+
+    # Generate a unique token and insert it into the tokens table.
+    # We have to lock the tokens table before generating the token, 
+    # since the database must be queried for token uniqueness.
+    &::SendSQL("LOCK TABLES tokens WRITE");
+    my $token = GenerateUniqueToken();
+    my $quotedtoken = &::SqlQuote($token);
+    my $quoted_emails = &::SqlQuote($old_email . ":" . $new_email);
+    &::SendSQL("INSERT INTO tokens ( userid , issuedate , token , 
+                                     tokentype , eventdata )
+                VALUES             ( $userid , '$issuedate' , $quotedtoken , 
+                                     'emailold' , $quoted_emails )");
+    my $newtoken = GenerateUniqueToken();
+    $quotedtoken = &::SqlQuote($newtoken);
+    &::SendSQL("INSERT INTO tokens ( userid , issuedate , token , 
+                                     tokentype , eventdata )
+                VALUES             ( $userid , '$issuedate' , $quotedtoken , 
+                                     'emailnew' , $quoted_emails )");
+    &::SendSQL("UNLOCK TABLES");
+
+    # Mail the user the token along with instructions for using it.
+
+    my $template = $::template;
+    my $vars = $::vars;
+
+    $vars->{'oldemailaddress'} = $old_email . &::Param('emailsuffix');
+    $vars->{'newemailaddress'} = $new_email . &::Param('emailsuffix');
+    
+    $vars->{'max_token_age'} = $maxtokenage;
+    $vars->{'token_ts'} = $token_ts;
+
+    $vars->{'token'} = $token;
+    $vars->{'emailaddress'} = $old_email . &::Param('emailsuffix');
+
+    my $message;
+    $template->process("account/email/change-old.txt.tmpl", $vars, \$message)
+      || &::ThrowTemplateError($template->error());
+
+    open SENDMAIL, "|/usr/lib/sendmail -t -i";
+    print SENDMAIL $message;
+    close SENDMAIL;
+
+    $vars->{'token'} = $newtoken;
+    $vars->{'emailaddress'} = $new_email . &::Param('emailsuffix');
+
+    $message = "";
+    $template->process("account/email/change-new.txt.tmpl", $vars, \$message)
+      || &::ThrowTemplateError($template->error());
+
+    open SENDMAIL, "|/usr/lib/sendmail -t -i";
+    print SENDMAIL $message;
+    close SENDMAIL;
+
+}
+
+sub IssuePasswordToken {
+    # Generates a random token, adds it to the tokens table, and sends it
+    # to the user with instructions for using it to change their password.
+
+    my ($loginname) = @_;
+
+    # Retrieve the user's ID from the database.
+    my $quotedloginname = &::SqlQuote($loginname);
+    &::SendSQL("SELECT userid FROM profiles WHERE login_name = $quotedloginname");
+    my ($userid) = &::FetchSQLData();
+
+    my $token_ts = time();
+    my $issuedate = time2str("%Y-%m-%d %H:%M", $token_ts);
+
+    # Generate a unique token and insert it into the tokens table.
+    # We have to lock the tokens table before generating the token, 
+    # since the database must be queried for token uniqueness.
+    &::SendSQL("LOCK TABLE tokens WRITE") if $::driver eq 'mysql';
+    my $token = GenerateUniqueToken();
+    my $quotedtoken = &::SqlQuote($token);
+    my $quotedipaddr = &::SqlQuote($::ENV{'REMOTE_ADDR'});
+    &::SendSQL("INSERT INTO tokens ( userid , issuedate , token , tokentype , eventdata )
+                VALUES      ( $userid , '$issuedate' , $quotedtoken , 'password' , $quotedipaddr )");
+    &::SendSQL("UNLOCK TABLES") if $::driver eq 'mysql';
+
+    # Mail the user the token along with instructions for using it.
+    
+    my $template = $::template;
+    my $vars = $::vars;
+
+    $vars->{'token'} = $token;
+    $vars->{'emailaddress'} = $loginname . &::Param('emailsuffix');
+
+    $vars->{'max_token_age'} = $maxtokenage;
+    $vars->{'token_ts'} = $token_ts;
+
+    my $message = "";
+    $template->process("account/password/forgotten-password.txt.tmpl", 
+                                                               $vars, \$message)
+      || &::ThrowTemplateError($template->error());
+
+    open SENDMAIL, "|/usr/lib/sendmail -t -i";
+    print SENDMAIL $message;
+    close SENDMAIL;
+
+}
+
+
+sub CleanTokenTable {
+    &::SendSQL("LOCK TABLES tokens WRITE") if $::driver eq 'mysql';
+    if ($::driver eq 'mysql') {
+        &::SendSQL("DELETE FROM tokens WHERE TO_DAYS(NOW()) - TO_DAYS(issuedate) >= " . $maxtokenage);
+    } elsif ($::driver eq 'Pg') {
+        &::SendSQL("DELETE FROM tokens WHERE now() - issuedate >= '$maxtokenage days'");
+    }
+    &::SendSQL("UNLOCK TABLES") if $::driver eq 'mysql';
+}
+
+
+sub GenerateUniqueToken {
+    # Generates a unique random token.  Uses &GenerateRandomPassword 
+    # for the tokens themselves and checks uniqueness by searching for
+    # the token in the "tokens" table.  Gives up if it can't come up
+    # with a token after about one hundred tries.
+
+    my $token;
+    my $duplicate = 1;
+    my $tries = 0;
+    while ($duplicate) {
+
+        ++$tries;
+        if ($tries > 100) {
+            &::DisplayError("Something is seriously wrong with the token generation system.");
+            exit;
+        }
+
+        $token = &::GenerateRandomPassword();
+        &::SendSQL("SELECT userid FROM tokens WHERE token = " . &::SqlQuote($token));
+        $duplicate = &::FetchSQLData();
+    }
+
+    return $token;
+
+}
+
+
+sub Cancel {
+    # Cancels a previously issued token and notifies the system administrator.
+    # This should only happen when the user accidentally makes a token request
+    # or when a malicious hacker makes a token request on behalf of a user.
+    
+    my ($token, $cancelaction) = @_;
+
+    # Quote the token for inclusion in SQL statements.
+    my $quotedtoken = &::SqlQuote($token);
+    
+    # Get information about the token being cancelled.
+    &::SendSQL("SELECT  issuedate , tokentype , eventdata , login_name , realname
+                FROM    tokens, profiles 
+                WHERE   tokens.userid = profiles.userid
+                AND     token = $quotedtoken");
+    my ($issuedate, $tokentype, $eventdata, $loginname, $realname) = &::FetchSQLData();
+
+    # Get the email address of the Bugzilla maintainer.
+    my $maintainer = &::Param('maintainer');
+
+    # Format the user's real name and email address into a single string.
+    my $username = $realname ? $realname . " <" . $loginname . ">" : $loginname;
+
+    my $template = $::template;
+    my $vars = $::vars;
+
+    $vars->{'emailaddress'} = $username;
+    $vars->{'maintainer'} = $maintainer;
+    $vars->{'remoteaddress'} = $::ENV{'REMOTE_ADDR'};
+    $vars->{'token'} = $token;
+    $vars->{'tokentype'} = $tokentype;
+    $vars->{'issuedate'} = $issuedate;
+    $vars->{'eventdata'} = $eventdata;
+    $vars->{'cancelaction'} = $cancelaction;
+
+    # Notify the user via email about the cancellation.
+
+    my $message;
+    $template->process("account/cancel-token.txt.tmpl", $vars, \$message)
+      || &::ThrowTemplateError($template->error());
+
+    open SENDMAIL, "|/usr/lib/sendmail -t -i";
+    print SENDMAIL $message;
+    close SENDMAIL;
+
+    # Delete the token from the database.
+    &::SendSQL("LOCK TABLE tokens WRITE") if $::driver eq 'mysql';
+    &::SendSQL("DELETE FROM tokens WHERE token = $quotedtoken");
+    &::SendSQL("UNLOCK TABLES") if $::driver eq 'mysql';
+}
+
+sub HasPasswordToken {
+    # Returns a password token if the user has one.
+    
+    my ($userid) = @_;
+    
+    &::SendSQL("SELECT token FROM tokens 
+                WHERE userid = $userid AND tokentype = 'password' LIMIT 1");
+    my ($token) = &::FetchSQLData();
+    
+    return $token;
+}
+
+sub HasEmailChangeToken {
+    # Returns an email change token if the user has one. 
+    
+    my ($userid) = @_;
+    
+    &::SendSQL("SELECT token FROM tokens 
+                 WHERE userid = $userid 
+                   AND tokentype = 'emailnew' 
+                    OR tokentype = 'emailold' LIMIT 1");
+    my ($token) = &::FetchSQLData();
+    
+    return $token;
+}
+
+
+1;

mozilla/webtools/bugzilla/UPGRADING

@@ -0,0 +1,3 @@
+Please consult The Bugzilla Guide for instructions on how to upgrade
+Bugzilla from an older version.  The Guide can be found with this
+distribution, in docs/html, docs/txt, and docs/sgml.

mozilla/webtools/bugzilla/UPGRADING-pre-2.8

@@ -0,0 +1,407 @@
+This file contains only important changes made to Bugzilla before release
+2.8.  If you are upgrading from version older than 2.8, please read this file.
+If you are upgrading from 2.8 or newer, please read the Installation and
+Upgrade instructions in The Bugzilla Guide, found with this distribution in
+docs/html, docs/txt, and docs/sgml.
+
+For a complete list of what changes, use Bonsai
+(http://cvs-mirror.mozilla.org/webtools/bonsai/cvsqueryform.cgi) to
+query the CVS tree.  For example,
+
+    http://cvs-mirror.mozilla.org/webtools/bonsai/cvsquery.cgi?module=all&branch=HEAD&branchtype=match&dir=mozilla%2Fwebtools%2Fbugzilla&file=&filetype=match&who=&whotype=match&sortby=Date&hours=2&date=week&mindate=&maxdate=&cvsroot=%2Fcvsroot 
+
+will tell you what has been changed in the last week.
+
+
+10/12/99 The CHANGES file is now obsolete!  There is a new file called
+checksetup.pl.  You should get in the habit of running that file every time
+you update your installation of Bugzilla.  That file will be constantly 
+updated to automatically update your installation to match any code changes.
+If you're curious as to what is going on, changes are commented in that file, 
+at the end.
+
+Many thanks to Holger Schurig <holgerschurig@nikocity.de> for writing this
+script!
+
+
+
+10/11/99 Restructured voting database to add a cached value in each
+bug recording how many total votes that bug has.  While I'm at it, I
+removed the unused "area" field from the bugs database.  It is
+distressing to realize that the bugs table has reached the maximum
+number of indices allowed by MySQL (16), which may make future
+enhancements awkward.
+
+You must feed the following to MySQL:
+
+	alter table bugs drop column area;
+	alter table bugs add column votes mediumint not null, add index (votes);
+
+You then *must* delete the data/versioncache file when you make this
+change, as it contains references to the "area" field.  Deleting it is safe,
+bugzilla will correctly regenerate it.
+
+If you have been using the voting feature at all, then you will then
+need to update the voting cache.  You can do this by visiting the
+sanitycheck.cgi page, and taking it up on its offer to rebuild the
+votes stuff.
+
+
+10/7/99 Added voting ability.  You must run the new script
+"makevotestable.sh".  You must also feed the following to mysql:
+
+	alter table products add column votesperuser smallint not null;
+
+
+
+9/15/99 Apparently, newer alphas of MySQL won't allow you to have
+"when" as a column name.  So, I have had to rename a column in the
+bugs_activity table.  You must feed the below to mysql or you won't
+work at all.
+
+	alter table bugs_activity change column when bug_when datetime not null;
+
+
+8/16/99 Added "OpenVMS" to the list of OS's. Feed this to mysql:
+
+	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "Mac System 8.6", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "FreeBSD", "OSF/1", "Solaris", "SunOS", "Neutrino", "OS/2", "BeOS", "OpenVMS", "other") not null;
+
+6/22/99 Added an entry to the attachments table to record who the submitter
+was.  Nothing uses this yet, but it still should be recorded.
+
+	alter table attachments add column submitter_id mediumint not null;
+
+You should also run this script to populate the new field:
+
+#!/usr/bonsaitools/bin/perl -w
+use diagnostics;
+use strict;
+require "globals.pl";
+$|=1;
+ConnectToDatabase();
+SendSQL("select bug_id, attach_id from attachments order by bug_id");
+my @list;
+while (MoreSQLData()) {
+    my @row = FetchSQLData();
+    push(@list, \@row);
+}
+foreach my $ref (@list) {
+    my ($bug, $attach) = (@$ref);
+    SendSQL("select long_desc from bugs where bug_id = $bug");
+    my $comment = FetchOneColumn() . "Created an attachment (id=$attach)";
+
+    if ($comment =~ m@-* Additional Comments From ([^ ]*)[- 0-9/:]*\nCreated an attachment \(id=$attach\)@) {
+	print "Found $1\n";
+	SendSQL("select userid from profiles where login_name=" .
+		SqlQuote($1));
+	my $userid = FetchOneColumn();
+	if (defined $userid && $userid > 0) {
+	    SendSQL("update attachments set submitter_id=$userid where attach_id = $attach");
+	}
+    } else {
+	print "Bug $bug can't find comment for attachment $attach\n";
+    }
+}
+
+
+
+
+
+
+6/14/99 Added "BeOS" to the list of OS's. Feed this to mysql:
+
+	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "Mac System 8.6", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "FreeBSD", "OSF/1", "Solaris", "SunOS", "Neutrino", "OS/2", "BeOS", "other") not null;
+
+
+5/27/99 Added support for dependency information.  You must run the new
+"makedependenciestable.sh" script.  You can turn off dependencies with the new
+"usedependencies" param, but it defaults to being on.  Also, read very
+carefully the description for the new "webdotbase" param; you will almost
+certainly need to tweak it.
+
+
+5/24/99 Added "Mac System 8.6" and "Neutrino" to the list of OS's.
+Feed this to mysql:
+
+	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "Mac System 8.6", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "FreeBSD", "OSF/1", "Solaris", "SunOS", "Neutrino", "OS/2", "other") not null;
+
+
+5/12/99 Added a pref to control how much email you get.  This needs a new
+column in the profiles table, so feed the following to mysql:
+
+	alter table profiles add column emailnotification enum("ExcludeSelfChanges", "CConly", "All") not null default "ExcludeSelfChanges";
+
+5/5/99 Added the ability to search by creation date.  To make this perform
+well, you ought to do the following:
+
+	alter table bugs change column creation_ts creation_ts datetime not null, add index (creation_ts);
+
+
+4/30/99 Added a new severity, "blocker".  To get this into your running
+Bugzilla, do the following:
+
+	alter table bugs change column bug_severity bug_severity enum("blocker", "critical", "major", "normal", "minor", "trivial", "enhancement") not null;
+
+
+4/22/99 There was a bug where the long descriptions of bugs had a variety of
+newline characters at the end, depending on the operating system of the browser
+that submitted the text.  This bug has been fixed, so that no further changes
+like that will happen.  But to fix problems that have already crept into your
+database, you can run the following perl script (which is slow and ugly, but
+does work:)
+#!/usr/bonsaitools/bin/perl -w
+use diagnostics;
+use strict;
+require "globals.pl";
+$|=1;
+ConnectToDatabase();
+SendSQL("select bug_id from bugs order by bug_id");
+my @list;
+while (MoreSQLData()) {
+    push(@list, FetchOneColumn());
+}
+foreach my $id (@list) {
+    if ($id % 50 == 0) {
+	print "\n$id ";
+    }
+    SendSQL("select long_desc from bugs where bug_id = $id");
+    my $comment = FetchOneColumn();
+    my $orig = $comment;
+    $comment =~ s/\r\n/\n/g;     # Get rid of windows-style line endings.
+    $comment =~ s/\r/\n/g;       # Get rid of mac-style line endings.
+    if ($comment ne $orig) {
+	SendSQL("update bugs set long_desc = " . SqlQuote($comment) .
+		" where bug_id = $id");
+	print ".";
+    } else {
+	print "-";
+    }
+}
+
+
+
+4/8/99 Added ability to store patches with bugs.  This requires a new table
+to store the data, so you will need to run the "makeattachmenttable.sh" script.
+
+3/25/99 Unfortunately, the HTML::FromText CPAN module had too many bugs, and
+so I had to roll my own.  We no longer use the HTML::FromText CPAN module.
+
+3/24/99 (This entry has been removed.  It used to say that we required the
+HTML::FromText CPAN module, but that's no longer true.)
+
+3/22/99 Added the ability to query by fields which have changed within a date
+range.  To make this perform a bit better, we need a new index:
+
+	alter table bugs_activity add index (field);
+
+3/10/99 Added 'groups' stuff, where we have different group bits that we can
+put on a person or on a bug.  Some of the group bits control access to bugzilla
+features.  And a person can't access a bug unless he has every group bit set
+that is also set on the bug.  See the comments in makegroupstable.sh for a bit
+more info.
+
+The 'maintainer' param is now used only as an email address for people to send
+complaints to.  The groups table is what is now used to determine permissions.
+
+You will need to run the new script "makegroupstable.sh".  And then you need to
+feed the following lines to MySQL (replace XXX with the login name of the
+maintainer, the person you wish to be all-powerful).
+
+	alter table bugs add column groupset bigint not null;
+	alter table profiles add column groupset bigint not null;
+	update profiles set groupset=0x7fffffffffffffff where login_name = XXX;
+
+
+
+3/8/99 Added params to control how priorities are set in a new bug.  You can
+now choose whether to let submitters of new bugs choose a priority, or whether
+they should just accept the default priority (which is now no longer hardcoded
+to "P2", but is instead a param.)  The default value of the params will cause
+the same behavior as before.
+
+3/3/99 Added a "disallownew" field to the products table.  If non-zero, then
+don't let people file new bugs against this product.  (This is for when a 
+product is retired, but you want to keep the bug reports around for posterity.)
+Feed this to MySQL:
+
+	alter table products add column disallownew tinyint not null;
+
+
+2/8/99 Added FreeBSD to the list of OS's.  Feed this to MySQL:
+
+	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "FreeBSD", "OSF/1", "Solaris", "SunOS", "OS/2", "other") not null;
+
+
+2/4/99 Added a new column "description" to the components table, and added 
+links to a new page which will use this to describe the components of a 
+given product.  Feed this to MySQL:
+
+	alter table components add column description mediumtext not null;
+
+
+2/3/99 Added a new column "initialqacontact" to the components table that gives
+an initial QA contact field.  It may be empty if you wish the initial qa
+contact to be empty.  If you're not using the QA contact field, you don't need
+to add this column, but you might as well be safe and add it anyway:
+
+	alter table components add column initialqacontact tinytext not null;
+
+
+2/2/99 Added a new column "milestoneurl" to the products table that gives a URL
+which is to describe the currently defined milestones for a product.  If you
+don't use target milestone, you might be able to get away without adding this
+column, but you might as well be safe and add it anyway:
+
+	alter table products add column milestoneurl tinytext not null;
+
+
+1/29/99 Whoops; had a misspelled op_sys.  It was "Mac System 7.1.6"; it should
+be "Mac System 7.6.1".  It turns out I had no bugs with this value set, so I
+could just do the below simple command.  If you have bugs with this value, you
+may need to do something more complicated.
+
+	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.6.1", "Mac System 8.0", "Mac System 8.5", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "OSF/1", "Solaris", "SunOS", "OS/2", "other") not null;
+
+
+
+1/20/99 Added new fields: Target Milestone, QA Contact, and Status Whiteboard.
+These fields are all optional in the UI; there are parameters to turn them on.
+However, whether or not you use them, the fields need to be in the DB.  There
+is some code that needs them, even if you don't.
+
+To update your DB to have these fields, send the following to MySQL:
+
+        alter table bugs add column target_milestone varchar(20) not null,
+                add column qa_contact mediumint not null,
+                add column status_whiteboard mediumtext not null,
+                add index (target_milestone), add index (qa_contact);
+
+
+
+1/18/99 You can now query by CC.  To make this perform reasonably, the CC table
+needs some indices.  The following MySQL does the necessary stuff:
+
+	alter table cc add index (bug_id), add index (who);
+
+
+1/15/99 The op_sys field can now be queried by (and more easily tweaked).
+To make this perform reasonably, it needs an index.  The following MySQL 
+command will create the necessary index:
+
+	alter table bugs add index (op_sys);
+
+
+12/2/98 The op_sys and rep_platform fields have been tweaked.  op_sys
+is now an enum, rather than having the legal values all hard-coded in
+perl.  rep_platform now no longer allows a value of "X-Windows".
+
+Here's how I ported to the new world.  This ought to work for you too.
+Actually, it's probably overkill.  I had a lot of illegal values for op_sys
+in my tables, from importing bugs from strange places.  If you haven't done 
+anything funky, then much of the below will be a no-op.
+
+First, send the following commands to MySQL to make sure all your values for
+rep_platform and op_sys are legal in the new world..
+
+	update bugs set rep_platform="Sun" where rep_platform="X-Windows" and op_sys like "Solaris%";
+	update bugs set rep_platform="SGI" where rep_platform="X-Windows" and op_sys = "IRIX";
+	update bugs set rep_platform="SGI" where rep_platform="X-Windows" and op_sys = "HP-UX";
+	update bugs set rep_platform="DEC" where rep_platform="X-Windows" and op_sys = "OSF/1";
+	update bugs set rep_platform="PC" where rep_platform="X-Windows" and op_sys = "Linux";
+	update bugs set rep_platform="other" where rep_platform="X-Windows";
+	update bugs set rep_platform="other" where rep_platform="";
+	update bugs set op_sys="Mac System 7" where op_sys="System 7";
+	update bugs set op_sys="Mac System 7.5" where op_sys="System 7.5";
+	update bugs set op_sys="Mac System 8.0" where op_sys="8.0";
+	update bugs set op_sys="OSF/1" where op_sys="Digital Unix 4.0";
+	update bugs set op_sys="IRIX" where op_sys like "IRIX %";
+	update bugs set op_sys="HP-UX" where op_sys like "HP-UX %";
+	update bugs set op_sys="Windows NT" where op_sys like "NT %";
+	update bugs set op_sys="OSF/1" where op_sys like "OSF/1 %";
+	update bugs set op_sys="Solaris" where op_sys like "Solaris %";
+	update bugs set op_sys="SunOS" where op_sys like "SunOS%";
+	update bugs set op_sys="other" where op_sys = "Motif";
+	update bugs set op_sys="other" where op_sys = "Other";
+
+Next, send the following commands to make sure you now have only legal
+entries in your table.  If either of the queries do not come up empty, then
+you have to do more stuff like the above.
+
+	select bug_id,op_sys,rep_platform from bugs where rep_platform not regexp "^(All|DEC|HP|Macintosh|PC|SGI|Sun|X-Windows|Other)$";
+	select bug_id,op_sys,rep_platform from bugs where op_sys not regexp "^(All|Windows 3.1|Windows 95|Windows 98|Windows NT|Mac System 7|Mac System 7.5|Mac System 7.1.6|Mac System 8.0|AIX|BSDI|HP-UX|IRIX|Linux|OSF/1|Solaris|SunOS|other)$";
+
+Finally, once that's all clear, alter the table to make enforce the new legal
+entries:
+
+	alter table bugs change column op_sys op_sys enum("All", "Windows 3.1", "Windows 95", "Windows 98", "Windows NT", "Mac System 7", "Mac System 7.5", "Mac System 7.1.6", "Mac System 8.0", "AIX", "BSDI", "HP-UX", "IRIX", "Linux", "OSF/1", "Solaris", "SunOS", "other") not null, change column rep_platform rep_platform enum("All", "DEC", "HP", "Macintosh", "PC", "SGI", "Sun", "Other");
+
+
+
+
+
+11/20/98 Added searching of CC field.  To better support this, added
+some indexes to the CC table.  You probably want to execute the following
+mysql commands:
+
+	alter table cc add index (bug_id);
+	alter table cc add index (who);
+
+
+10/27/98 security check for legal products in place. bug charts are not
+available as an option if collectstats.pl has never been run. all products 
+get daily stats collected now. README updated: Chart::Base is listed as
+a requirement, instructions for using collectstats.pl included as 
+an optional step. also got silly and added optional quips to bug
+reports. 
+
+10/17/98 modified README installation instructions slightly. 
+
+10/7/98 Added a new table called "products".  Right now, this is used
+only to have a description for each product, and that description is
+only used when initially adding a new bug.  Anyway, you *must* create
+the new table (which you can do by running the new makeproducttable.sh
+script).  If you just leave it empty, things will work much as they
+did before, or you can add descriptions for some or all of your
+products.
+
+
+9/15/98 Everything has been ported to Perl.  NO MORE TCL.  This
+transition should be relatively painless, except for the "params"
+file.  This is the file that contains parameters you've set up on the
+editparams.cgi page.  Before changing to Perl, this was a tcl-syntax
+file, stored in the same directory as the code; after the change to
+Perl, it becomes a perl-syntax file, stored in a subdirectory named
+"data".  See the README file for more details on what version of Perl
+you need.
+
+So, if updating from an older version of Bugzilla, you will need to
+edit data/param, change the email address listed for
+$::param{'maintainer'}, and then go revisit the editparams.cgi page
+and reset all the parameters to your taste.  Fortunately, your old
+params file will still be around, and so you ought to be able to
+cut&paste important bits from there.
+
+Also, note that the "whineatnews" script has changed name (it now has
+an extension of .pl instead of .tcl), so you'll need to change your
+cron job.
+
+And the "comments" file has been moved to the data directory.  Just do
+"cat comments >> data/comments" to restore any old comments that may
+have been lost.
+
+
+
+9/2/98 Changed the way password validation works.  We now keep a
+crypt'd version of the password in the database, and check against
+that.  (This is silly, because we're also keeping the plaintext
+version there, but I have plans...)  Stop passing the plaintext
+password around as a cookie; instead, we have a cookie that references
+a record in a new database table, logincookies.
+
+IMPORTANT: if updating from an older version of Bugzilla, you must run
+the following commands to keep things working:
+
+ ./makelogincookiestable.sh
+ echo "alter table profiles add column cryptpassword varchar(64);" | mysql bugs
+ echo "update profiles set cryptpassword = encrypt(password,substring(rand(),3, 4));" | mysql bugs
+

mozilla/webtools/bugzilla/attachment.cgi

@@ -0,0 +1,792 @@
+#!/usr/bonsaitools/bin/perl -wT
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Terry Weissman <terry@mozilla.org>
+#                 Myk Melez <myk@mozilla.org>
+
+################################################################################
+# Script Initialization
+################################################################################
+
+# Make it harder for us to do dangerous things in Perl.
+use diagnostics;
+use strict;
+
+use lib qw(.);
+
+use vars qw(
+  $template
+  $vars
+);
+
+# Include the Bugzilla CGI and general utility library.
+require "CGI.pl";
+
+# Establish a connection to the database backend.
+ConnectToDatabase();
+
+# Check whether or not the user is logged in and, if so, set the $::userid 
+# and $::usergroupset variables.
+quietly_check_login();
+
+################################################################################
+# Main Body Execution
+################################################################################
+
+# All calls to this script should contain an "action" variable whose value
+# determines what the user wants to do.  The code below checks the value of
+# that variable and runs the appropriate code.
+
+# Determine whether to use the action specified by the user or the default.
+my $action = $::FORM{'action'} || 'view';
+
+if ($action eq "view")  
+{ 
+  validateID();
+  view(); 
+}
+elsif ($action eq "viewall") 
+{ 
+  ValidateBugID($::FORM{'bugid'});
+  viewall(); 
+}
+elsif ($action eq "enter") 
+{ 
+  confirm_login();
+  ValidateBugID($::FORM{'bugid'});
+  enter(); 
+}
+elsif ($action eq "insert")
+{
+  confirm_login();
+  ValidateBugID($::FORM{'bugid'});
+  ValidateComment($::FORM{'comment'});
+  validateFilename();
+  validateData();
+  validateDescription();
+  validateIsPatch();
+  validateContentType() unless $::FORM{'ispatch'};
+  validateObsolete() if $::FORM{'obsolete'};
+  insert();
+}
+elsif ($action eq "edit") 
+{ 
+  quietly_check_login();
+  validateID();
+  validateCanEdit($::FORM{'id'});
+  edit(); 
+}
+elsif ($action eq "update") 
+{ 
+  confirm_login();
+  ValidateComment($::FORM{'comment'});
+  validateID();
+  validateCanEdit($::FORM{'id'});
+  validateDescription();
+  validateIsPatch();
+  validateContentType() unless $::FORM{'ispatch'};
+  validateIsObsolete();
+  validateStatuses();
+  update();
+}
+else 
+{ 
+  DisplayError("I could not figure out what you wanted to do.")
+}
+
+exit;
+
+################################################################################
+# Data Validation / Security Authorization
+################################################################################
+
+sub validateID
+{
+  # Validate the value of the "id" form field, which must contain an
+  # integer that is the ID of an existing attachment.
+
+  detaint_natural($::FORM{'id'})
+    || DisplayError("You did not enter a valid attachment number.") 
+      && exit;
+  
+  # Make sure the attachment exists in the database.
+  SendSQL("SELECT bug_id FROM attachments WHERE attach_id = $::FORM{'id'}");
+  MoreSQLData()
+    || DisplayError("Attachment #$::FORM{'id'} does not exist.") 
+    && exit;
+
+  # Make sure the user is authorized to access this attachment's bug.
+  my ($bugid) = FetchSQLData();
+  ValidateBugID($bugid);
+}
+
+sub validateCanEdit
+{
+    my ($attach_id) = (@_);
+
+    # If the user is not logged in, claim that they can edit. This allows
+    # the edit scrren to be displayed to people who aren't logged in.
+    # People not logged in can't actually commit changes, because that code
+    # calls confirm_login, not quietly_check_login, before calling this sub
+    return if $::userid == 0;
+
+    # People in editbugs can edit all attachments
+    return if UserInGroup("editbugs");
+
+    # Bug 97729 - the submitter can edit their attachments
+    SendSQL("SELECT attach_id FROM attachments WHERE " .
+            "attach_id = $attach_id AND submitter_id = $::userid");
+
+    FetchSQLData()
+      || DisplayError("You are not authorised to edit attachment #$attach_id")
+      && exit;
+}
+
+sub validateDescription
+{
+  $::FORM{'description'}
+    || DisplayError("You must enter a description for the attachment.")
+      && exit;
+}
+
+sub validateIsPatch
+{
+  # Set the ispatch flag to zero if it is undefined, since the UI uses
+  # an HTML checkbox to represent this flag, and unchecked HTML checkboxes
+  # do not get sent in HTML requests.
+  $::FORM{'ispatch'} = $::FORM{'ispatch'} ? 1 : 0;
+
+  # Set the content type to text/plain if the attachment is a patch.
+  $::FORM{'contenttype'} = "text/plain" if $::FORM{'ispatch'};
+}
+
+sub validateContentType
+{
+  if (!$::FORM{'contenttypemethod'})
+  {
+    DisplayError("You must choose a method for determining the content type,
+      either <em>auto-detect</em>, <em>select from list</em>, or <em>enter 
+      manually</em>.");
+    exit;
+  }
+  elsif ($::FORM{'contenttypemethod'} eq 'autodetect')
+  {
+    # The user asked us to auto-detect the content type, so use the type
+    # specified in the HTTP request headers.
+    if ( !$::FILE{'data'}->{'contenttype'} )
+    {
+      DisplayError("You asked Bugzilla to auto-detect the content type, but
+        your browser did not specify a content type when uploading the file, 
+        so you must enter a content type manually.");
+      exit;
+    }
+    $::FORM{'contenttype'} = $::FILE{'data'}->{'contenttype'};
+  }
+  elsif ($::FORM{'contenttypemethod'} eq 'list')
+  {
+    # The user selected a content type from the list, so use their selection.
+    $::FORM{'contenttype'} = $::FORM{'contenttypeselection'};
+  }
+  elsif ($::FORM{'contenttypemethod'} eq 'manual')
+  {
+    # The user entered a content type manually, so use their entry.
+    $::FORM{'contenttype'} = $::FORM{'contenttypeentry'};
+  }
+  else
+  {
+    my $htmlcontenttypemethod = html_quote($::FORM{'contenttypemethod'});
+    DisplayError("Your form submission got corrupted somehow.  The <em>content
+      method</em> field, which specifies how the content type gets determined,
+      should have been either <em>autodetect</em>, <em>list</em>, 
+      or <em>manual</em>, but was instead <em>$htmlcontenttypemethod</em>.");
+    exit;
+  }
+
+  if ( $::FORM{'contenttype'} !~ /^(application|audio|image|message|model|multipart|text|video)\/.+$/ )
+  {
+    my $htmlcontenttype = html_quote($::FORM{'contenttype'});
+    DisplayError("The content type <em>$htmlcontenttype</em> is invalid.
+      Valid types must be of the form <em>foo/bar</em> where <em>foo</em> 
+      is either <em>application, audio, image, message, model, multipart, 
+      text,</em> or <em>video</em>.");
+    exit;
+  }
+}
+
+sub validateIsObsolete
+{
+  # Set the isobsolete flag to zero if it is undefined, since the UI uses
+  # an HTML checkbox to represent this flag, and unchecked HTML checkboxes
+  # do not get sent in HTML requests.
+  $::FORM{'isobsolete'} = $::FORM{'isobsolete'} ? 1 : 0;
+}
+
+sub validateStatuses
+{
+  # Get a list of attachment statuses that are valid for this attachment.
+  PushGlobalSQLState();
+  SendSQL("SELECT  attachstatusdefs.id
+           FROM    attachments, bugs, attachstatusdefs
+           WHERE   attachments.attach_id = $::FORM{'id'}
+           AND     attachments.bug_id = bugs.bug_id
+           AND     attachstatusdefs.product = bugs.product");
+  my @statusdefs;
+  push(@statusdefs, FetchSQLData()) while MoreSQLData();
+  PopGlobalSQLState();
+  
+  foreach my $status (@{$::MFORM{'status'}})
+  {
+    grep($_ == $status, @statusdefs)
+      || DisplayError("One of the statuses you entered is not a valid status
+                       for this attachment.")
+        && exit;
+    # We have tested that the status is valid, so it can be detainted
+    detaint_natural($status);
+  }
+}
+
+sub validateData
+{
+  $::FORM{'data'}
+    || DisplayError("The file you are trying to attach is empty!")
+      && exit;
+
+  my $len = length($::FORM{'data'});
+
+  my $maxpatchsize = Param('maxpatchsize');
+  my $maxattachmentsize = Param('maxattachmentsize');
+  
+  # Makes sure the attachment does not exceed either the "maxpatchsize" or 
+  # the "maxattachmentsize" parameter.
+  if ( $::FORM{'ispatch'} && $maxpatchsize && $len > $maxpatchsize*1024 )
+  {
+    my $lenkb = sprintf("%.0f", $len/1024);
+    DisplayError("The file you are trying to attach is ${lenkb} kilobytes (KB) in size.  
+                  Patches cannot be more than ${maxpatchsize}KB in size.
+                  Try breaking your patch into several pieces.");
+    exit;
+  } elsif ( !$::FORM{'ispatch'} && $maxattachmentsize && $len > $maxattachmentsize*1024 ) {
+    my $lenkb = sprintf("%.0f", $len/1024);
+    DisplayError("The file you are trying to attach is ${lenkb} kilobytes (KB) in size.  
+                  Non-patch attachments cannot be more than ${maxattachmentsize}KB.
+                  If your attachment is an image, try converting it to a compressable
+                  format like JPG or PNG, or put it elsewhere on the web and
+                  link to it from the bug's URL field or in a comment on the bug.");
+    exit;
+  }
+}
+
+sub validateFilename
+{
+  defined $::FILE{'data'}
+    || DisplayError("You did not specify a file to attach.")
+      && exit;
+}
+
+sub validateObsolete
+{
+  # Make sure the attachment id is valid and the user has permissions to view
+  # the bug to which it is attached.
+  foreach my $attachid (@{$::MFORM{'obsolete'}}) {
+    detaint_natural($attachid)
+      || DisplayError("The attachment number of one of the attachments 
+           you wanted to obsolete is invalid.") 
+        && exit;
+  
+    SendSQL("SELECT bug_id, isobsolete, description 
+             FROM attachments WHERE attach_id = $attachid");
+
+    # Make sure the attachment exists in the database.
+    MoreSQLData()
+      || DisplayError("Attachment #$attachid does not exist.") 
+        && exit;
+
+    my ($bugid, $isobsolete, $description) = FetchSQLData();
+
+    if ($bugid != $::FORM{'bugid'})
+    {
+      $description = html_quote($description);
+      DisplayError("Attachment #$attachid ($description) is attached 
+        to bug #$bugid, but you tried to flag it as obsolete while
+        creating a new attachment to bug #$::FORM{'bugid'}.");
+      exit;
+    }
+
+    if ( $isobsolete )
+    {
+      $description = html_quote($description);
+      DisplayError("Attachment #$attachid ($description) is already obsolete.");
+      exit;
+    }
+
+    # Check that the user can modify this attachment
+    validateCanEdit($attachid);
+  }
+
+}
+
+################################################################################
+# Functions
+################################################################################
+
+sub view
+{
+  # Display an attachment.
+
+  # Retrieve the attachment content and its content type from the database.
+  SendSQL("SELECT mimetype, thedata FROM attachments WHERE attach_id = $::FORM{'id'}");
+  my ($contenttype, $thedata) = FetchSQLData();
+    
+  # Return the appropriate HTTP response headers.
+  print "Content-Type: $contenttype\n\n";
+
+  print $thedata;
+}
+
+
+sub viewall
+{
+  # Display all attachments for a given bug in a series of IFRAMEs within one HTML page.
+
+  # Retrieve the attachments from the database and write them into an array
+  # of hashes where each hash represents one attachment.
+  SendSQL("SELECT attach_id, creation_ts, mimetype, description, ispatch, isobsolete 
+           FROM attachments WHERE bug_id = $::FORM{'bugid'} ORDER BY attach_id");
+  my @attachments; # the attachments array
+  while (MoreSQLData())
+  {
+    my %a; # the attachment hash
+    ($a{'attachid'}, $a{'date'}, $a{'contenttype'}, 
+     $a{'description'}, $a{'ispatch'}, $a{'isobsolete'}) = FetchSQLData();
+
+    # Format the attachment's creation/modification date into something readable.
+    if ($a{'date'} =~ /^(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)(\d\d)$/) {
+        $a{'date'} = "$3/$4/$2&nbsp;$5:$6";
+    }
+
+    # Flag attachments as to whether or not they can be viewed (as opposed to
+    # being downloaded).  Currently I decide they are viewable if their MIME type 
+    # is either text/*, image/*, or application/vnd.mozilla.*.
+    # !!! Yuck, what an ugly hack.  Fix it!
+    $a{'isviewable'} = ( $a{'contenttype'} =~ /^(text|image|application\/vnd\.mozilla\.)/ );
+
+    # Retrieve a list of status flags that have been set on the attachment.
+    PushGlobalSQLState();
+    SendSQL("SELECT    name 
+             FROM      attachstatuses, attachstatusdefs 
+             WHERE     attach_id = $a{'attachid'} 
+             AND       attachstatuses.statusid = attachstatusdefs.id
+             ORDER BY  sortkey");
+    my @statuses;
+    push(@statuses, FetchSQLData()) while MoreSQLData();
+    $a{'statuses'} = \@statuses;
+    PopGlobalSQLState();
+
+    # Add the hash representing the attachment to the array of attachments.
+    push @attachments, \%a;
+  }
+
+  # Retrieve the bug summary for displaying on screen.
+  SendSQL("SELECT short_desc FROM bugs WHERE bug_id = $::FORM{'bugid'}");
+  my ($bugsummary) = FetchSQLData();
+
+  # Define the variables and functions that will be passed to the UI template.
+  $vars->{'bugid'} = $::FORM{'bugid'};
+  $vars->{'bugsummary'} = $bugsummary;
+  $vars->{'attachments'} = \@attachments;
+
+  # Return the appropriate HTTP response headers.
+  print "Content-Type: text/html\n\n";
+
+  # Generate and return the UI (HTML page) from the appropriate template.
+  $template->process("attachment/show-multiple.html.tmpl", $vars)
+    || ThrowTemplateError($template->error());
+}
+
+
+sub enter
+{
+  # Display a form for entering a new attachment.
+
+  # Retrieve the attachments the user can edit from the database and write
+  # them into an array of hashes where each hash represents one attachment.
+  my $canEdit = "";
+  if (!UserInGroup("editbugs")) {
+      $canEdit = "AND submitter_id = $::userid";
+  }
+  SendSQL("SELECT attach_id, description 
+           FROM attachments
+           WHERE bug_id = $::FORM{'bugid'}
+           AND isobsolete = 0 $canEdit
+           ORDER BY attach_id");
+  my @attachments; # the attachments array
+  while ( MoreSQLData() ) {
+    my %a; # the attachment hash
+    ($a{'id'}, $a{'description'}) = FetchSQLData();
+
+    # Add the hash representing the attachment to the array of attachments.
+    push @attachments, \%a;
+  }
+
+  # Retrieve the bug summary for displaying on screen.
+  SendSQL("SELECT short_desc FROM bugs WHERE bug_id = $::FORM{'bugid'}");
+  my ($bugsummary) = FetchSQLData();
+
+  # Define the variables and functions that will be passed to the UI template.
+  $vars->{'bugid'} = $::FORM{'bugid'};
+  $vars->{'bugsummary'} = $bugsummary;
+  $vars->{'attachments'} = \@attachments;
+
+  # Return the appropriate HTTP response headers.
+  print "Content-Type: text/html\n\n";
+
+  # Generate and return the UI (HTML page) from the appropriate template.
+  $template->process("attachment/create.html.tmpl", $vars)
+    || ThrowTemplateError($template->error());
+}
+
+
+sub insert
+{
+  # Insert a new attachment into the database.
+
+  # Escape characters in strings that will be used in SQL statements.
+  my $filename = SqlQuote($::FILE{'data'}->{'filename'});
+  my $description = SqlQuote($::FORM{'description'});
+  my $contenttype = SqlQuote($::FORM{'contenttype'});
+  my $thedata = SqlQuote($::FORM{'data'});
+
+  # Insert the attachment into the database.
+  SendSQL("INSERT INTO attachments (bug_id, filename, description, mimetype, ispatch, submitter_id, thedata) 
+           VALUES ($::FORM{'bugid'}, $filename, $description, $contenttype, $::FORM{'ispatch'}, $::userid, $thedata)");
+
+  # Retrieve the ID of the newly created attachment record.
+  SendSQL("SELECT LAST_INSERT_ID()");
+  my $attachid = FetchOneColumn();
+
+  # Insert a comment about the new attachment into the database.
+  my $comment = "Created an attachment (id=$attachid)\n$::FORM{'description'}\n";
+  $comment .= ("\n" . $::FORM{'comment'}) if $::FORM{'comment'};
+
+  use Text::Wrap;
+  $Text::Wrap::columns = 80;
+  $Text::Wrap::huge = 'overflow';
+  $comment = Text::Wrap::wrap('', '', $comment);
+
+  AppendComment($::FORM{'bugid'}, 
+                $::COOKIE{"Bugzilla_login"},
+                $comment);
+
+  # Make existing attachments obsolete.
+  my $fieldid = GetFieldID('attachments.isobsolete');
+  foreach my $attachid (@{$::MFORM{'obsolete'}}) {
+    SendSQL("UPDATE attachments SET isobsolete = 1 WHERE attach_id = $attachid");
+    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
+             VALUES ($::FORM{'bugid'}, $attachid, $::userid, NOW(), $fieldid, '0', '1')");
+  }
+
+  # Send mail to let people know the attachment has been created.  Uses a 
+  # special syntax of the "open" and "exec" commands to capture the output of 
+  # "processmail", which "system" doesn't allow, without running the command 
+  # through a shell, which backticks (``) do.
+  #system ("./processmail", $bugid , $::userid);
+  #my $mailresults = `./processmail $bugid $::userid`;
+  my $mailresults = '';
+  open(PMAIL, "-|") or exec('./processmail', $::FORM{'bugid'}, $::COOKIE{'Bugzilla_login'});
+  $mailresults .= $_ while <PMAIL>;
+  close(PMAIL);
+ 
+  # Define the variables and functions that will be passed to the UI template.
+  $vars->{'bugid'} = $::FORM{'bugid'};
+  $vars->{'attachid'} = $attachid;
+  $vars->{'description'} = $description;
+  $vars->{'mailresults'} = $mailresults;
+  $vars->{'contenttypemethod'} = $::FORM{'contenttypemethod'};
+  $vars->{'contenttype'} = $::FORM{'contenttype'};
+
+  # Return the appropriate HTTP response headers.
+  print "Content-Type: text/html\n\n";
+
+  # Generate and return the UI (HTML page) from the appropriate template.
+  $template->process("attachment/created.html.tmpl", $vars)
+    || ThrowTemplateError($template->error());
+}
+
+
+sub edit
+{
+  # Edit an attachment record.  Users with "editbugs" privileges, (or the 
+  # original attachment's submitter) can edit the attachment's description,
+  # content type, ispatch and isobsolete flags, and statuses, and they can
+  # also submit a comment that appears in the bug.
+  # Users cannot edit the content of the attachment itself.
+
+  # Retrieve the attachment from the database.
+  SendSQL("SELECT description, mimetype, bug_id, ispatch, isobsolete 
+           FROM attachments WHERE attach_id = $::FORM{'id'}");
+  my ($description, $contenttype, $bugid, $ispatch, $isobsolete) = FetchSQLData();
+
+  # Flag attachment as to whether or not it can be viewed (as opposed to
+  # being downloaded).  Currently I decide it is viewable if its content
+  # type is either text/.* or application/vnd.mozilla.*.
+  # !!! Yuck, what an ugly hack.  Fix it!
+  my $isviewable = ( $contenttype =~ /^(text|image|application\/vnd\.mozilla\.)/ );
+
+  # Retrieve a list of status flags that have been set on the attachment.
+  my %statuses;
+  SendSQL("SELECT  id, name 
+           FROM    attachstatuses JOIN attachstatusdefs 
+           WHERE   attachstatuses.statusid = attachstatusdefs.id 
+           AND     attach_id = $::FORM{'id'}");
+  while ( my ($id, $name) = FetchSQLData() )
+  {
+    $statuses{$id} = $name;
+  }
+
+  # Retrieve a list of statuses for this bug's product, and build an array 
+  # of hashes in which each hash is a status flag record.
+  # ???: Move this into versioncache or its own routine?
+  my @statusdefs;
+  SendSQL("SELECT   id, name 
+           FROM     attachstatusdefs, bugs 
+           WHERE    bug_id = $bugid 
+           AND      attachstatusdefs.product = bugs.product 
+           ORDER BY sortkey");
+  while ( MoreSQLData() )
+  {
+    my ($id, $name) = FetchSQLData();
+    push @statusdefs, { 'id' => $id , 'name' => $name };
+  }
+
+  # Retrieve a list of attachments for this bug as well as a summary of the bug
+  # to use in a navigation bar across the top of the screen.
+  SendSQL("SELECT attach_id FROM attachments WHERE bug_id = $bugid ORDER BY attach_id");
+  my @bugattachments;
+  push(@bugattachments, FetchSQLData()) while (MoreSQLData());
+  SendSQL("SELECT short_desc FROM bugs WHERE bug_id = $bugid");
+  my ($bugsummary) = FetchSQLData();
+
+  # Define the variables and functions that will be passed to the UI template.
+  $vars->{'attachid'} = $::FORM{'id'}; 
+  $vars->{'description'} = $description; 
+  $vars->{'contenttype'} = $contenttype; 
+  $vars->{'bugid'} = $bugid; 
+  $vars->{'bugsummary'} = $bugsummary; 
+  $vars->{'ispatch'} = $ispatch; 
+  $vars->{'isobsolete'} = $isobsolete; 
+  $vars->{'isviewable'} = $isviewable; 
+  $vars->{'statuses'} = \%statuses; 
+  $vars->{'statusdefs'} = \@statusdefs; 
+  $vars->{'attachments'} = \@bugattachments; 
+
+  # Return the appropriate HTTP response headers.
+  print "Content-Type: text/html\n\n";
+
+  # Generate and return the UI (HTML page) from the appropriate template.
+  $template->process("attachment/edit.html.tmpl", $vars)
+    || ThrowTemplateError($template->error());
+}
+
+
+sub update 
+{
+  # Update an attachment record.
+
+  # Get the bug ID for the bug to which this attachment is attached.
+  SendSQL("SELECT bug_id FROM attachments WHERE attach_id = $::FORM{'id'}");
+  my $bugid = FetchSQLData() 
+    || DisplayError("Cannot figure out bug number.")
+    && exit;
+
+  # Lock database tables in preparation for updating the attachment.
+  if ($::driver eq 'mysql') {
+    SendSQL("LOCK TABLES attachments WRITE , attachstatuses WRITE , 
+             attachstatusdefs READ , fielddefs READ , bugs_activity WRITE");
+  }
+
+  # Get a copy of the attachment record before we make changes
+  # so we can record those changes in the activity table.
+  SendSQL("SELECT description, mimetype, ispatch, isobsolete 
+           FROM attachments WHERE attach_id = $::FORM{'id'}");
+  my ($olddescription, $oldcontenttype, $oldispatch, $oldisobsolete) = FetchSQLData();
+
+  # Get the list of old status flags.
+  SendSQL("SELECT    attachstatusdefs.name 
+           FROM      attachments, attachstatuses, attachstatusdefs
+           WHERE     attachments.attach_id = $::FORM{'id'}
+           AND       attachments.attach_id = attachstatuses.attach_id
+           AND       attachstatuses.statusid = attachstatusdefs.id
+           ORDER BY  attachstatusdefs.sortkey
+          ");
+  my @oldstatuses;
+  while (MoreSQLData()) {
+    push(@oldstatuses, FetchSQLData());
+  }
+  my $oldstatuslist = join(', ', @oldstatuses);
+
+  # Update the database with the new status flags.
+  SendSQL("DELETE FROM attachstatuses WHERE attach_id = $::FORM{'id'}");
+  foreach my $statusid (@{$::MFORM{'status'}}) 
+  {
+    SendSQL("INSERT INTO attachstatuses (attach_id, statusid) VALUES ($::FORM{'id'}, $statusid)");
+  }
+
+  # Get the list of new status flags.
+  SendSQL("SELECT    attachstatusdefs.name 
+           FROM      attachments, attachstatuses, attachstatusdefs
+           WHERE     attachments.attach_id = $::FORM{'id'}
+           AND       attachments.attach_id = attachstatuses.attach_id
+           AND       attachstatuses.statusid = attachstatusdefs.id
+           ORDER BY  attachstatusdefs.sortkey
+          ");
+  my @newstatuses;
+  while (MoreSQLData()) {
+    push(@newstatuses, FetchSQLData());
+  }
+  my $newstatuslist = join(', ', @newstatuses);
+
+  # Quote the description and content type for use in the SQL UPDATE statement.
+  my $quoteddescription = SqlQuote($::FORM{'description'});
+  my $quotedcontenttype = SqlQuote($::FORM{'contenttype'});
+
+  # Update the attachment record in the database.
+  # Sets the creation timestamp to itself to avoid it being updated automatically.
+  SendSQL("UPDATE  attachments 
+           SET     description = $quoteddescription , 
+                   mimetype = $quotedcontenttype , 
+                   ispatch = $::FORM{'ispatch'} , 
+                   isobsolete = $::FORM{'isobsolete'} , 
+                   creation_ts = creation_ts
+           WHERE   attach_id = $::FORM{'id'}
+         ");
+
+  # Record changes in the activity table.
+  if ($olddescription ne $::FORM{'description'}) {
+    my $quotedolddescription = SqlQuote($olddescription);
+    my $fieldid = GetFieldID('attachments.description');
+    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
+             VALUES ($bugid, $::FORM{'id'}, $::userid, NOW(), $fieldid, $quotedolddescription, $quoteddescription)");
+  }
+  if ($oldcontenttype ne $::FORM{'contenttype'}) {
+    my $quotedoldcontenttype = SqlQuote($oldcontenttype);
+    my $fieldid = GetFieldID('attachments.mimetype');
+    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
+             VALUES ($bugid, $::FORM{'id'}, $::userid, NOW(), $fieldid, $quotedoldcontenttype, $quotedcontenttype)");
+  }
+  if ($oldispatch ne $::FORM{'ispatch'}) {
+    my $fieldid = GetFieldID('attachments.ispatch');
+    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
+             VALUES ($bugid, $::FORM{'id'}, $::userid, NOW(), $fieldid, $oldispatch, $::FORM{'ispatch'})");
+  }
+  if ($oldisobsolete ne $::FORM{'isobsolete'}) {
+    my $fieldid = GetFieldID('attachments.isobsolete');
+    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
+             VALUES ($bugid, $::FORM{'id'}, $::userid, NOW(), $fieldid, $oldisobsolete, $::FORM{'isobsolete'})");
+  }
+  if ($oldstatuslist ne $newstatuslist) {
+    my ($removed, $added) = DiffStrings($oldstatuslist, $newstatuslist);
+    my $quotedremoved = SqlQuote($removed);
+    my $quotedadded = SqlQuote($added);
+    my $fieldid = GetFieldID('attachstatusdefs.name');
+    SendSQL("INSERT INTO bugs_activity (bug_id, attach_id, who, bug_when, fieldid, removed, added) 
+             VALUES ($bugid, $::FORM{'id'}, $::userid, NOW(), $fieldid, $quotedremoved, $quotedadded)");
+  }
+
+  # Unlock all database tables now that we are finished updating the database.
+  if ($::driver eq 'mysql') {
+    SendSQL("UNLOCK TABLES");
+  }
+
+  # If this installation has enabled the request manager, let the manager know
+  # an attachment was updated so it can check for requests on that attachment
+  # and fulfill them.  The request manager allows users to request database
+  # changes of other users and tracks the fulfillment of those requests.  When
+  # an attachment record is updated and the request manager is called, it will
+  # fulfill those requests that were requested of the user performing the update
+  # which are requests for the attachment being updated.
+  #my $requests;
+  #if (Param('userequestmanager'))
+  #{
+  #  use Request;
+  #  # Specify the fieldnames that have been updated.
+  #  my @fieldnames = ('description', 'mimetype', 'status', 'ispatch', 'isobsolete');
+  #  # Fulfill pending requests.
+  #  $requests = Request::fulfillRequest('attachment', $::FORM{'id'}, @fieldnames);
+  #  $vars->{'requests'} = $requests; 
+  #}
+
+  # If the user submitted a comment while editing the attachment, 
+  # add the comment to the bug.
+  if ( $::FORM{'comment'} )
+  {
+    use Text::Wrap;
+    $Text::Wrap::columns = 80;
+    $Text::Wrap::huge = 'wrap';
+
+    # Append a string to the comment to let users know that the comment came from
+    # the "edit attachment" screen.
+    my $comment = qq|(From update of attachment $::FORM{'id'})\n| . $::FORM{'comment'};
+
+    my $wrappedcomment = "";
+    foreach my $line (split(/\r\n|\r|\n/, $comment))
+    {
+      if ( $line =~ /^>/ )
+      {
+        $wrappedcomment .= $line . "\n";
+      }
+      else
+      {
+        $wrappedcomment .= wrap('', '', $line) . "\n";
+      }
+    }
+
+    # Get the user's login name since the AppendComment function needs it.
+    my $who = DBID_to_name($::userid);
+    # Mention $::userid again so Perl doesn't give me a warning about it.
+    my $neverused = $::userid;
+
+    # Append the comment to the list of comments in the database.
+    AppendComment($bugid, $who, $wrappedcomment);
+
+  }
+
+  # Send mail to let people know the bug has changed.  Uses a special syntax
+  # of the "open" and "exec" commands to capture the output of "processmail",
+  # which "system" doesn't allow, without running the command through a shell,
+  # which backticks (``) do.
+  #system ("./processmail", $bugid , $::userid);
+  #my $mailresults = `./processmail $bugid $::userid`;
+  my $mailresults = '';
+  open(PMAIL, "-|") or exec('./processmail', $bugid, DBID_to_name($::userid));
+  $mailresults .= $_ while <PMAIL>;
+  close(PMAIL);
+ 
+  # Define the variables and functions that will be passed to the UI template.
+  $vars->{'attachid'} = $::FORM{'id'}; 
+  $vars->{'bugid'} = $bugid; 
+  $vars->{'mailresults'} = $mailresults; 
+
+  # Return the appropriate HTTP response headers.
+  print "Content-Type: text/html\n\n";
+
+  # Generate and return the UI (HTML page) from the appropriate template.
+  $template->process("attachment/updated.html.tmpl", $vars)
+    || ThrowTemplateError($template->error());
+}

mozilla/webtools/bugzilla/bug_form.pl

@@ -0,0 +1,378 @@
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Terry Weissman <terry@mozilla.org>
+#                 Dave Miller <justdave@syndicomm.com>
+
+use diagnostics;
+use strict;
+
+use RelationSet;
+
+# Use the Attachment module to display attachments for the bug.
+use Attachment;
+
+sub show_bug {    
+    # Shut up misguided -w warnings about "used only once".  For some reason,
+    # "use vars" chokes on me when I try it here.
+    sub bug_form_pl_sillyness {
+        my $zz;
+        $zz = %::FORM;
+        $zz = %::proddesc;
+        $zz = %::prodmaxvotes;
+        $zz = @::enterable_products;                                            
+        $zz = @::settable_resolution;
+        $zz = $::unconfirmedstate;
+        $zz = $::milestoneurl;
+        $zz = $::template;
+        $zz = $::vars;
+        $zz = @::legal_priority;
+        $zz = @::legal_platform;
+        $zz = @::legal_severity;
+        $zz = @::legal_bug_status;
+        $zz = @::target_milestone;
+        $zz = @::components;
+        $zz = @::legal_keywords;
+        $zz = @::versions;
+        $zz = @::legal_opsys;
+    }
+
+    # Use templates
+    my $template = $::template;
+    my $vars = $::vars;
+    
+    $vars->{'GetBugLink'} = \&GetBugLink;
+    $vars->{'quoteUrls'} = \&quoteUrls,
+    $vars->{'lsearch'} = \&lsearch,
+    $vars->{'header_done'} = (@_),
+
+    quietly_check_login();
+
+    my $id = $::FORM{'id'};
+    
+    if (!defined($id)) {
+      $template->process("bug/choose.html.tmpl", $vars)
+        || ThrowTemplateError($template->error());
+      exit;
+    }
+    
+    my %user = %{$vars->{'user'}};
+    my %bug;
+
+    # Populate the bug hash with the info we get directly from the DB.
+    my $query = "
+SELECT
+    bugs.bug_id,
+    product,
+    version,
+    rep_platform,
+    op_sys,
+    bug_status,
+    resolution,
+    priority,
+    bug_severity,
+    component,
+    assigned_to,
+    reporter,
+    bug_file_loc,
+    short_desc,
+    target_milestone,
+    qa_contact,
+    status_whiteboard, ";
+
+    if ($::driver eq 'mysql') {
+        $query .= "
+    date_format(creation_ts, '%Y-%m-%d %H:%i'),
+    groupset,  
+    delta_ts, ";
+    } elsif ($::driver eq 'Pg') {
+        $query .= "
+    TO_CHAR(creation_ts, 'YYYY-MM-DD HH24:MI:SS'),
+    groupset,
+    TO_CHAR(delta_ts, 'YYYYMMDDHH24MISS'), ";
+    }
+
+    $query .= "
+    SUM(votes.count)
+FROM 
+    bugs LEFT JOIN votes USING(bug_id)
+WHERE 
+    bugs.bug_id = $id
+GROUP BY 
+    bugs.bug_id,
+    product,
+    version,
+    rep_platform,
+    op_sys,
+    bug_status,
+    resolution,
+    priority,
+    bug_severity,
+    component,
+    assigned_to,
+    reporter,
+    bug_file_loc,
+    short_desc,
+    target_milestone,
+    qa_contact,
+    status_whiteboard,
+    creation_ts,
+    groupset,
+    delta_ts ";
+
+    SendSQL($query);
+
+    my $value;
+    my @row = FetchSQLData();
+    foreach my $field ("bug_id", "product", "version", "rep_platform",
+                       "op_sys", "bug_status", "resolution", "priority",
+                       "bug_severity", "component", "assigned_to", "reporter",
+                       "bug_file_loc", "short_desc", "target_milestone",
+                       "qa_contact", "status_whiteboard", "creation_ts",
+                       "groupset", "delta_ts", "votes") 
+    {
+        $value = shift(@row);
+        $bug{$field} = defined($value) ? $value : "";
+    }
+
+    # General arrays of info about the database state
+    GetVersionTable();
+
+    # Fiddle the product list.
+    my $seen_curr_prod;
+    my @prodlist;
+    
+    foreach my $product (@::enterable_products) {
+        if ($product eq $bug{'product'}) {
+            # if it's the product the bug is already in, it's ALWAYS in
+            # the popup, period, whether the user can see it or not, and
+            # regardless of the disallownew setting.
+            $seen_curr_prod = 1;
+            push(@prodlist, $product);
+            next;
+        }
+
+        if (Param("usebuggroupsentry")
+          && GroupExists($product)
+          && !UserInGroup($product))
+        {
+            # If we're using bug groups to restrict entry on products, and
+            # this product has a bug group, and the user is not in that
+            # group, we don't want to include that product in this list.
+            next;
+        }
+
+        push(@prodlist, $product);
+    }
+
+    # The current product is part of the popup, even if new bugs are no longer
+    # allowed for that product
+    if (!$seen_curr_prod) {
+        push (@prodlist, $bug{'product'});
+        @prodlist = sort @prodlist;
+    }
+
+    $vars->{'product'} = \@prodlist;
+    $vars->{'rep_platform'} = \@::legal_platform;
+    $vars->{'priority'} = \@::legal_priority;
+    $vars->{'bug_severity'} = \@::legal_severity;
+    $vars->{'op_sys'} = \@::legal_opsys;
+    $vars->{'bug_status'} = \@::legal_bug_status;
+
+    # Hack - this array contains "" for some reason. See bug 106589.
+    shift @::settable_resolution; 
+    $vars->{'resolution'} = \@::settable_resolution;
+
+    $vars->{'component_'} = $::components{$bug{'product'}};
+    $vars->{'version'} = $::versions{$bug{'product'}};
+    $vars->{'target_milestone'} = $::target_milestone{$bug{'product'}};
+    $bug{'milestoneurl'} = $::milestoneurl{$bug{'product'}} || 
+                           "notargetmilestone.html";
+
+    $vars->{'use_votes'} = $::prodmaxvotes{$bug{'product'}};
+
+    # Add additional, calculated fields to the bug hash
+    if (@::legal_keywords) {
+        $vars->{'use_keywords'} = 1;
+
+        SendSQL("SELECT keyworddefs.name 
+                 FROM keyworddefs, keywords
+                 WHERE keywords.bug_id = $id 
+                 AND keyworddefs.id = keywords.keywordid
+                 ORDER BY keyworddefs.name");
+        my @keywords;
+        while (MoreSQLData()) {
+            push(@keywords, FetchOneColumn());
+        }
+
+        $bug{'keywords'} = \@keywords;
+    }    
+
+    # Attachments
+    $bug{'attachments'} = Attachment::query($id);
+
+    # Dependencies
+    my @list;
+    SendSQL("SELECT dependson FROM dependencies WHERE  
+             blocked = $id ORDER BY dependson");
+    while (MoreSQLData()) {
+        my ($i) = FetchSQLData();
+        push(@list, $i);
+    }
+
+    $bug{'dependson'} = \@list;
+
+    my @list2;
+    SendSQL("SELECT blocked FROM dependencies WHERE  
+             dependson = $id ORDER BY blocked");
+    while (MoreSQLData()) {
+        my ($i) = FetchSQLData();
+        push(@list2, $i);
+    }
+
+    $bug{'blocked'} = \@list2;
+
+    # Groups
+    my @groups;
+    if ($::usergroupset ne '0' || $bug{'groupset'} ne '0') {      
+        my $bug_groupset = $bug{'groupset'};
+    
+        if ($::driver eq 'mysql') {
+            SendSQL("select bit, name, description, (bit & $bug{'groupset'} != 0), " .
+                    "(bit & $::usergroupset != 0) from groups where isbuggroup != 0 " .
+                    # Include active groups as well as inactive groups to which
+                    # the bug already belongs.  This way the bug can be removed
+                    # from an inactive group but can only be added to active ones.
+                    "and ((isactive = 1 or (bit & $bug{'groupset'} != 0)) or " .
+                    "(bit & $bug{'groupset'} != 0)) " .
+                    "order by description");
+        } elsif ($::driver eq 'Pg') {
+            SendSQL("select group_bit, name, description, (group_bit & int8($bug{'groupset'}) != 0), " .
+                    "(group_bit & int8($::usergroupset) != 0) from groups where isbuggroup != 0 " .
+                    # Include active groups as well as inactive groups to which
+                    # the bug already belongs.  This way the bug can be removed
+                    # from an inactive group but can only be added to active ones.
+                    "and ((isactive = 1 or (group_bit & int8($bug{'groupset'}) != 0)) or " .
+                    "(group_bit & int8($bug{'groupset'}) != 0)) " .
+                    "order by description");
+        }
+
+        $user{'inallgroups'} = 1;
+
+        while (MoreSQLData()) {
+            my ($bit, $name, $description, $ison, $ingroup) = FetchSQLData();
+            # For product groups, we only want to display the checkbox if either
+            # (1) The bit is already set, or
+            # (2) The user is in the group, but either:
+            #     (a) The group is a product group for the current product, or
+            #     (b) The group name isn't a product name
+            # This means that all product groups will be skipped, but 
+            # non-product bug groups will still be displayed.
+            if($ison || 
+               ($ingroup && (($name eq $bug{'product'}) ||
+                             (!defined $::proddesc{$name}))))
+            {
+                $user{'inallgroups'} &= $ingroup;
+
+                push (@groups, { "bit" => $bit,
+                                 "ison" => $ison,
+                                 "ingroup" => $ingroup,
+                                 "description" => $description });            
+            }
+        }
+
+        # If the bug is restricted to a group, display checkboxes that allow
+        # the user to set whether or not the reporter 
+        # and cc list can see the bug even if they are not members of all 
+        # groups to which the bug is restricted.
+        if ($bug{'groupset'} != 0) {
+            $bug{'inagroup'} = 1;
+
+            # Determine whether or not the bug is always accessible by the
+            # reporter, QA contact, and/or users on the cc: list.
+            SendSQL("SELECT reporter_accessible, cclist_accessible
+                     FROM   bugs
+                     WHERE  bug_id = $id
+                    ");
+            ($bug{'reporter_accessible'}, 
+             $bug{'cclist_accessible'}) = FetchSQLData();        
+        }
+    }
+    $vars->{'groups'} = \@groups;
+
+    my $movers = Param("movers");
+    $user{'canmove'} = Param("move-enabled") 
+                       && (defined $::COOKIE{"Bugzilla_login"}) 
+                       && ($::COOKIE{"Bugzilla_login"} =~ /\Q$movers\E/);
+
+    # User permissions
+
+    # In the below, if the person hasn't logged in ($::userid == 0), then
+    # we treat them as if they can do anything.  That's because we don't
+    # know why they haven't logged in; it may just be because they don't
+    # use cookies.  Display everything as if they have all the permissions
+    # in the world; their permissions will get checked when they log in
+    # and actually try to make the change.
+    $user{'canedit'} = $::userid == 0
+                       || $::userid == $bug{'reporter'}
+                       || $::userid == $bug{'qa_contact'}
+                       || $::userid == $bug{'assigned_to'}
+                       || UserInGroup("editbugs");                   
+    $user{'canconfirm'} = ($::userid == 0) || UserInGroup("canconfirm");
+
+    # Bug states
+    $bug{'isunconfirmed'} = ($bug{'bug_status'} eq $::unconfirmedstate);
+    $bug{'isopened'} = IsOpenedState($bug{'bug_status'});
+
+    # People involved with the bug
+    $bug{'assigned_to_email'} = DBID_to_name($bug{'assigned_to'});
+    $bug{'assigned_to'} = DBID_to_real_or_loginname($bug{'assigned_to'});
+    $bug{'reporter'} = DBID_to_real_or_loginname($bug{'reporter'});
+    $bug{'qa_contact'} = $bug{'qa_contact'} > 0 ? 
+                                          DBID_to_name($bug{'qa_contact'}) : "";
+
+    my $ccset = new RelationSet;
+    $ccset->mergeFromDB("SELECT who FROM cc WHERE bug_id=$id");
+    
+    my @cc = $ccset->toArrayOfStrings();
+    $bug{'cc'} = \@cc if $cc[0];
+
+    # Next bug in list (if there is one)
+    my @bug_list;
+    if ($::COOKIE{"BUGLIST"} && $id) 
+    {
+        @bug_list = split(/:/, $::COOKIE{"BUGLIST"});
+    }
+    $vars->{'bug_list'} = \@bug_list;
+
+    $bug{'comments'} = GetComments($bug{'bug_id'});
+
+    # This is length in number of comments
+    $bug{'longdesclength'} = scalar(@{$bug{'comments'}});
+
+    # Add the bug and user hashes to the variables
+    $vars->{'bug'} = \%bug;
+    $vars->{'user'} = \%user;
+
+    # Generate and return the UI (HTML page) from the appropriate template.
+    $template->process("bug/edit.html.tmpl", $vars)
+      || ThrowTemplateError($template->error());
+}
+ 
+1;

mozilla/webtools/bugzilla/bug_status.html

@@ -0,0 +1,206 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<HTML>
+
+<!--
+     The contents of this file are subject to the Mozilla Public
+     License Version 1.1 (the "License"); you may not use this file
+     except in compliance with the License. You may obtain a copy of
+     the License at http://www.mozilla.org/MPL/
+    
+     Software distributed under the License is distributed on an "AS
+     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+     implied. See the License for the specific language governing
+     rights and limitations under the License.
+    
+     The Original Code is the Bugzilla Bug Tracking System.
+    
+     The Initial Developer of the Original Code is Netscape Communications
+     Corporation. Portions created by Netscape are
+     Copyright (C) 1998 Netscape Communications Corporation. All
+     Rights Reserved.
+    
+     Contributor(s): 
+
+     Contributor(s): Terry Weissman <terry@mozilla.org>
+-->
+
+<head>
+<TITLE>A Bug's Life Cycle</TITLE>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+</head>
+<body>
+
+<h1 ALIGN=CENTER>A Bug's Life Cycle</h1>
+
+The <B>status</B> and <B>resolution</B> field define and track the
+life cycle of a bug.
+
+<a name="status"></a>
+<p>
+<TABLE BORDER=1 CELLPADDING=4>
+
+<TR ALIGN=CENTER VALIGN=TOP>
+<TD WIDTH="50%"><H1>STATUS</H1> <TD><H1>RESOLUTION</H1>
+
+<TR VALIGN=TOP>
+<TD>The <B>status</B> field indicates the general health of a bug. Only
+certain status transitions are allowed.
+<TD>The <b>resolution</b> field indicates what happened to this bug.
+
+<TR VALIGN=TOP><TD>
+<DL><DT><B>
+<A HREF="confirmhelp.html">UNCONFIRMED</A></B> 
+<DD> This bug has recently been added to the database.  Nobody has
+     validated that this bug is true.  Users who have the "canconfirm"
+     permission set may confirm this bug, changing its state to NEW.
+     Or, it may be directly resolved and marked RESOLVED.
+<DT><B>NEW</B> 
+<DD> This bug has recently been added to the assignee's list of bugs
+     and must be processed. Bugs in this state may be accepted, and
+     become <B>ASSIGNED</B>, passed on to someone else, and remain
+     <B>NEW</B>, or resolved and marked <B>RESOLVED</B>.
+<DT><B>ASSIGNED</B> 
+<DD> This bug is not yet resolved, but is assigned to the proper
+     person. From here bugs can be given to another person and become
+     <B>NEW</B>, or resolved and become <B>RESOLVED</B>.
+<DT><B>REOPENED</B>
+<DD>This bug was once resolved, but the resolution was deemed
+     incorrect.  For example, a <B>WORKSFORME</B> bug is
+     <B>REOPENED</B> when more information shows up and the bug is now
+     reproducible.  From here bugs are either marked <B>ASSIGNED</B>
+     or <B>RESOLVED</B>.
+</DL>
+<TD>
+<DL>
+<DD> No resolution yet. All bugs which are in one of these "open" states
+     have the resolution set to blank. All other bugs
+     will be marked with one of the following resolutions.
+</DL>
+
+<TR VALIGN=TOP><TD>
+<DL>
+<DT><B>RESOLVED</B> 
+<DD> A resolution has been taken, and it is awaiting verification by
+     QA. From here bugs are either re-opened and become
+     <B>REOPENED</B>, are marked <B>VERIFIED</B>, or are closed for good
+     and marked <B>CLOSED</B>.
+<DT><B>VERIFIED</B>
+<DD> QA has looked at the bug and the resolution and agrees that the
+     appropriate resolution has been taken.  Bugs remain in this state
+     until the product they were reported against actually ships, at
+     which point they become <B>CLOSED</B>.
+<DT><B>CLOSED</B> 
+<DD> The bug is considered dead, the resolution is correct. Any zombie
+     bugs who choose to walk the earth again must do so by becoming
+     <B>REOPENED</B>.
+</DL>
+
+<TD>
+<DL>
+<DT><B>FIXED</B>
+<DD> A fix for this bug is checked into the tree and tested.
+<DT><B>INVALID</B>
+<DD> The problem described is not a bug 
+<DT><B>WONTFIX</B>
+<DD> The problem described is a bug which will never be fixed.
+<DT><B>LATER</B>
+<DD> The problem described is a bug which will not be fixed in this
+     version of the product.
+<DT><B>REMIND</B>
+<DD> The problem described is a bug which will probably not be fixed in this
+     version of the product, but might still be.
+<DT><B>DUPLICATE</B>
+<DD> The problem is a duplicate of an existing bug. Marking a bug
+     duplicate requires the bug# of the duplicating bug and will at
+     least put that bug number in the description field.
+<DT><B>WORKSFORME</B>
+<DD> All attempts at reproducing this bug were futile, reading the
+     code produces no clues as to why this behavior would occur. If
+     more information appears later, please re-assign the bug, for
+     now, file it.
+</DL>
+</TABLE>
+
+<H1>Other Fields</H1>
+
+<table border=1 cellpadding=4><tr><td>
+<h2><a name="severity">Severity</a></h2>
+
+This field describes the impact of a bug.
+
+<p>
+<p>
+ 
+<table>
+<tr><th>Blocker</th><td>Blocks development and/or testing work
+<tr><th>Critical</th><td>crashes, loss of data, severe memory leak 
+<tr><th>Major</th><td>major loss of function 
+<tr><th>Minor</th><td>minor loss of function, or other problem where easy workaround is present 
+<tr><th>Trivial</th><td>cosmetic problem like misspelled words or misaligned text 
+<tr><th>Enhancement</th><td>Request for enhancement
+</table> 
+
+</td><td>
+
+<h2><a name="priority">Priority</a></h2>
+
+This field describes the importance and order in which a bug should be
+fixed.  This field is utilized by the programmers/engineers to
+prioritize their work to be done.  The available priorities are:
+
+<p>
+<p>
+
+<table>
+<tr><th>P1</th><td>Most important
+<tr><th>P2</th><td>
+<tr><th>P3</th><td>
+<tr><th>P4</th><td>
+<tr><th>P5</th><td>Least important
+</table>
+</tr></table>
+
+<h2><a name="rep_platform">Platform</a></h2>
+This is the hardware platform against which the bug was reported.  Legal
+platforms include:
+
+<UL>
+<LI> All (happens on all platform; cross-platform bug)
+<LI> Macintosh
+<LI> PC
+<LI> Sun
+<LI> HP
+</UL>
+
+<b>Note:</b> Selecting the option "All" does not select bugs assigned against all platforms.  It
+merely selects bugs that <b>occur</b> on all platforms.
+
+<h2><a name="op_sys">Operating System</a></h2>
+This is the operating system against which the bug was reported.  Legal
+operating systems include:
+
+<UL>
+<LI> All (happens on all operating systems; cross-platform bug)
+<LI> Windows 95
+<LI> Mac System 8.0
+<LI> Linux
+</UL>
+
+Note that the operating system implies the platform, but not always.
+For example, Linux can run on PC and Macintosh and others.
+
+<h2><a name="assigned_to">Assigned To</a></h2>
+
+This is the person in charge of resolving the bug.  Every time this
+field changes, the status changes to <B>NEW</B> to make it easy to see
+which new bugs have appeared on a person's list.
+
+The default status for queries is set to NEW, ASSIGNED and REOPENED. When
+searching for bugs that have been resolved or verified, remember to set the
+status field appropriately. 
+
+<hr>
+<!-- hhmts start -->
+Last modified: Sun Apr 14 12:51:23 EST 2002
+<!-- hhmts end -->
+</body> </html>

mozilla/webtools/bugzilla/bugwritinghelp.html

@@ -0,0 +1,392 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
+<html>
+<head>
+<meta http-equiv="content-type" content="text/html; charset=iso-8859-1">
+<title>Bug Writing Guidelines</title>
+</head>
+<body>
+<center>
+<h1>Bug Writing Guidelines</h1>
+</center>
+
+<h3>Why You Should Read This</h3>
+
+<blockquote>
+<p>Simply put, the more effectively you report a bug, the more
+likely an engineer will actually fix it.</p>
+
+<p>These guidelines are a general
+tutorial to teach novice and intermediate bug reporters how to compose effective bug reports. Not every sentence may precisely apply to
+your software project.</p>
+</blockquote>
+
+<h3>How to Write a Useful Bug Report</h3>
+
+<blockquote>
+<p>Useful bug reports are ones that get bugs fixed. A useful bug
+report normally has two qualities:</p>
+
+<ol>
+<li><b>Reproducible.</b> If an engineer can't see the bug herself to prove that it exists, she'll probably stamp your bug report "WORKSFORME" or "INVALID" and move on to the next bug. Every detail you can provide helps.<br>
+<br>
+</li>
+
+<li><b>Specific.</b> The quicker the engineer can isolate the bug
+to a specific area, the more likely she'll expediently fix it. 
+(If a programmer or tester has to decypher a bug, they may spend
+more time cursing the submitter than solving the problem.)
+<br>
+<br>
+[ <a href="#tips" name="Anchor">Tell Me More</a> ]
+</li>
+</ol>
+
+<p>Let's say the application you're testing is a web browser. You
+crash at foo.com, and want to write up a bug report:</p>
+
+<blockquote>
+<p><b>BAD:</b> "My browser crashed. I think I was on www.foo.com. I play golf with Bill Gates, so you better fix this problem, or I'll report you to him. By the way, your Back icon looks like a squashed rodent. UGGGLY. And my grandmother's home page is all messed up in your browser. Thx 4 UR help."
+</p>
+
+<p>
+ <b>GOOD:</b> "I crashed each time I went to www.foo.com, using
+the 2002-02-25 build on a Windows 2000 system. I also
+rebooted into Linux, and reproduced this problem using the 2002-02-24
+Linux build.
+</p>
+
+<p>
+ It again crashed each time upon drawing the Foo banner at the top
+of the page. I broke apart the page, and discovered that the
+following image link will crash the application reproducibly,
+unless you remove the "border=0" attribute:
+</p>
+
+<p>
+ <tt>&lt;IMG SRC="http://www.foo.com/images/topics/topicfoos.gif"
+width="34" height="44" border="0" alt="News"&gt;</tt>
+</p>
+</blockquote>
+</blockquote>
+
+<h3>How to Enter your Useful Bug Report into Bugzilla:</h3>
+
+<blockquote>
+<p>Before you enter your bug, use Bugzilla's 
+<a href="query.cgi">search page</a> to determine whether the defect you've discovered is a known, already-reported bug. If your bug is the 37th duplicate of a known issue, you're more likely to annoy the engineer. (Annoyed
+engineers fix fewer bugs.)
+</p>
+
+<p>
+Next, be sure to reproduce your bug using a recent
+build. Engineers tend to be most interested in problems affecting
+the code base that they're actively working on. After all, the bug you're reporting
+may already be fixed.
+
+</p>
+
+<p>
+ If you've discovered a new bug using a current build, report it in
+Bugzilla:
+</p>
+
+<ol>
+<li>From your Bugzilla main page, choose 
+"<a href="enter_bug.cgi">Enter a new bug</a>".</li>
+
+<li>Select the product that you've found a bug in.</li>
+
+<li>Enter your e-mail address, password, and press the "Login"
+button. (If you don't yet have a password, leave the password field empty, 
+and press the "E-mail me a password" button instead.
+You'll quickly receive an e-mail message with your password.)</li>
+</ol>
+
+<p>Now, fill out the form. Here's what it all means:</p>
+
+<p><b>Where did you find the bug?</b></p>
+
+<blockquote>
+<p><b>Product: In which product did you find the bug?</b><br>
+ You just specified this on the last page, so you can't edit it here.</p>
+
+<p><b>Version: In which product version did you find the
+bug?</b><br>
+ (If applicable)</p>
+
+<p><b>Component: In which component does the bug exist?</b><br>
+Bugzilla requires that you select a component to enter a bug. (Not sure which to choose? 
+Click on the Component link. You'll see a description of each component, to help you make the best choice.)</p>
+
+<p><b>OS: On which Operating System (OS) did you find this bug?</b>
+(e.g. Linux, Windows 2000, Mac OS 9.)<br>
+ If you know the bug happens on all OSs, choose 'All'. Otherwise,
+select the OS that you found the bug on, or "Other" if your OS
+isn't listed.</p>
+</blockquote>
+
+<p><b>How important is the bug?</b></p>
+
+<blockquote>
+<p><b>Severity: How damaging is the bug?</b><br>
+ This item defaults to 'normal'. If you're not sure what severity your bug deserves, click on the Severity link.
+ You'll see a description of each severity rating. <br>
+</p>
+</blockquote>
+
+<p><b>Who will be following up on the bug?</b></p>
+
+<blockquote>
+<p><b>Assigned To: Which engineer should be responsible for fixing
+this bug?</b><br>
+ Bugzilla will automatically assign the bug to a default engineer
+upon submitting a bug report. If you'd prefer to directly assign the bug to
+someone else, enter their e-mail address into this field. (To see the list of
+default engineers for each component, click on the Component
+link.)</p>
+
+<p><b>Cc: Who else should receive e-mail updates on changes to this
+bug?</b><br>
+ List the full e-mail addresses of other individuals who should
+receive an e-mail update upon every change to the bug report. You
+can enter as many e-mail addresses as you'd like, separated by spaces or commas, as long as those
+people have Bugzilla accounts.</p>
+</blockquote>
+
+<p><b>What else can you tell the engineer about the bug?</b></p>
+
+<blockquote>
+
+<p><b>Summary:</b> <b>How would you describe the bug, in
+approximately 60 or fewer characters?</b><br>
+ A good summary should <b>quickly and uniquely identify a bug
+report</b>. Otherwise, an engineer cannot meaningfully identify
+your bug by its summary, and will often fail to pay attention to
+your bug report when skimming through a 10 page bug list.<br>
+<br>
+ A useful summary might be 
+ "<tt>PCMCIA install fails on Tosh Tecra 780DVD w/ 3c589C</tt>". 
+ "<tt>Software fails</tt>" or "<tt>install problem</tt>" would be
+examples of a bad summary.<br>
+<br>
+ [ <a href="#summary">Tell Me More</a> ]<br>
+<br>
+ <b>Description: </b><br>
+ Please provide a detailed problem report in this field.
+Your bug's recipients will most likely expect the following information:</p>
+
+<blockquote>
+<p><b>Overview Description:</b> More detailed expansion of
+summary.</p>
+
+<blockquote>
+<pre>
+Drag-selecting any page crashes Mac builds in NSGetFactory
+</pre>
+</blockquote>
+
+<p><b>Steps to Reproduce:</b> Minimized, easy-to-follow steps that will
+trigger the bug. Include any special setup steps.</p>
+
+<blockquote>
+<pre>
+1) View any web page. (I used the default sample page,
+resource:/res/samples/test0.html)
+                          
+2) Drag-select the page. (Specifically, while holding down 
+the mouse button, drag the mouse pointer downwards from any 
+point in the browser's content region to the bottom of the 
+browser's content region.)                   
+</pre>
+</blockquote>
+
+<p>
+ <b>Actual Results:</b> What the application did after performing
+the above steps. 
+</p>
+
+<blockquote>
+<pre>
+The application crashed. Stack crawl appended below from MacsBug.
+</pre>
+</blockquote>
+
+<p><b>Expected Results:</b> What the application should have done,
+were the bug not present.</p>
+
+<blockquote>
+<pre>
+The window should scroll downwards. Scrolled content should be selected. 
+(Or, at least, the application should not crash.)
+</pre>
+</blockquote>
+
+<p><b>Build Date &amp; Platform:</b> Date and platform of the build
+that you first encountered the bug in.</p>
+
+<blockquote>
+<pre>
+Build 2002-03-15 on Mac OS 9.0
+</pre>
+</blockquote>
+
+<p><b>Additional Builds and Platforms:</b> Whether or not the bug
+takes place on other platforms (or browsers, if applicable).</p>
+
+<blockquote>
+<pre>
+- Also Occurs On        
+    Mozilla (2002-03-15 build on Windows NT 4.0) 
+                                    
+- Doesn't Occur On        
+    Mozilla (2002-03-15 build on Red Hat Linux; feature not supported)        
+    Internet Explorer 5.0 (shipping build on Windows NT 4.0)        
+    Netscape Communicator 4.5 (shipping build on Mac OS 9.0)
+</pre>
+</blockquote>
+
+<p><b>Additional Information:</b> Any other debugging information.
+For crashing bugs:</p>
+
+<ul>
+<li><b>Win32:</b> if you receive a Dr. Watson error, please note
+the type of the crash, and the module that the application crashed
+in. (e.g. access violation in apprunner.exe)</li>
+
+<li><b>Mac OS:</b> if you're running MacsBug, please provide the
+results of a <b>how</b> and an <b>sc</b>:</li>
+</ul>
+
+<blockquote>
+<pre>
+*** MACSBUG STACK CRAWL OF CRASH (Mac OS)
+Calling chain using A6/R1 links 
+    Back chain  ISA  Caller 
+    00000000    PPC  0BA85E74   
+    03AEFD80    PPC  0B742248   
+    03AEFD30    PPC  0B50FDDC  NSGetFactory+027FC
+PowerPC unmapped memory exception at 0B512BD0 NSGetFactory+055F0
+</pre>
+</blockquote>
+</blockquote>
+</blockquote>
+
+<p>You're done!<br>
+<br>
+ After double-checking your entries for any possible errors, press
+the "Commit" button, and your bug report will now be in the
+Bugzilla database.<br>
+</p>
+</blockquote>
+
+<hr>
+<h3>More Information on Writing Good Bugs</h3>
+
+<blockquote>
+<p><b><a name="tips"></a> 1. General Tips for a Useful Bug
+Report</b>
+</p>
+
+<blockquote>
+<p>
+ <b>Use an explicit structure, so your bug reports are easy to
+skim.</b> Bug report users often need immediate access to specific
+sections of your bug. If your Bugzilla installation supports the
+Bugzilla Helper, use it.
+</p>
+
+<p>
+ <b>Avoid cuteness if it costs clarity.</b> Nobody will be laughing
+at your funny bug title at 3:00 AM when they can't remember how to
+find your bug.
+</p>
+
+<p>
+ <b>One bug per report.</b> Completely different people typically
+fix, verify, and prioritize different bugs. If you mix a handful of
+bugs into a single report, the right people probably won't discover
+your bugs in a timely fashion, or at all. Certain bugs are also
+more important than others. It's impossible to prioritize a bug
+report when it contains four different issues, all of differing
+importance.
+</p>
+
+<p>
+ <b>No bug is too trivial to report.</b> Unless you're reading the
+source code, you can't see actual software bugs, like a dangling
+pointer -- you'll see their visible manifestations, such as the
+segfault when the application finally crashes. Severe software
+problems can manifest themselves in superficially trivial ways.
+File them anyway.<br>
+</p>
+</blockquote>
+
+<p><b><a name="summary"></a>2. How and Why to Write Good Bug Summaries</b>
+</p>
+
+<blockquote>
+<p><b>You want to make a good first impression on the bug
+recipient.</b> Just like a New York Times headline guides readers
+towards a relevant article from dozens of choices, will your bug summary
+suggest that your bug report is worth reading from dozens or hundreds of
+choices?
+</p>
+
+<p>
+ Conversely, a vague bug summary like <tt>install problem</tt> forces anyone
+reviewing installation bugs to waste time opening up your bug to
+determine whether it matters.
+</p>
+
+<p>
+ <b>Your bug will often be searched by its summary.</b> Just as
+you'd find web pages with Google by searching by keywords through
+intuition, so will other people locate your bugs. Descriptive bug
+summaries are naturally keyword-rich, and easier to find.
+</p>
+
+<p>
+ For example, you'll find a bug titled "<tt>Dragging icons from List View to
+gnome-terminal doesn't paste path</tt>" if you search on "List",
+"terminal", or "path". Those search keywords wouldn't have found a
+bug titled "<tt>Dragging icons
+doesn't paste</tt>".
+</p>
+
+<p>
+ Ask yourself, "Would someone understand my bug from just this
+summary?" If so, you've written a fine summary.
+</p>
+
+<p><b>Don't write titles like these:</b></p>
+
+<ol>
+ <li>"Can't install" - Why can't you install? What happens when you
+try to install?</li>
+<li>"Severe Performance Problems" - ...and they occur when you do
+what?</li>
+<li>"back button does not work" - Ever? At all?</li>
+</ol>
+
+<p><b>Good bug titles:</b></p>
+<ol>
+<li>"1.0 upgrade installation fails if Mozilla M18 package present"
+- Explains problem and the context.</li>
+<li>"RPM 4 installer crashes if launched on Red Hat 6.2 (RPM 3)
+system" - Explains what happens, and the context.</li>
+</ol>
+
+
+
+</blockquote>
+</blockquote>
+
+<p>(Written and maintained by 
+<a href="http://www.prometheus-music.com/eli">Eli Goldberg</a>. Claudius
+Gayle, Gervase Markham, Peter Mock, Chris Pratt, Tom Schutter and Chris Yeh also
+contributed significant changes. Constructive 
+<a href="mailto:eli@prometheus-music.com">suggestions</a> welcome.)</p>
+
+</body>
+</html>
+

mozilla/webtools/bugzilla/bugzilla.dtd

@@ -0,0 +1,46 @@
+<!ELEMENT bugzilla (bug+)>
+<!ATTLIST bugzilla
+	version CDATA #REQUIRED
+	urlbase CDATA #REQUIRED
+	maintainer CDATA #REQUIRED
+	exporter CDATA #IMPLIED
+>
+<!ELEMENT bug (bug_id, (bug_status, product, priority, version, rep_platform, assigned_to, delta_ts, component, reporter, target_milestone?, bug_severity, creation_ts, qa_contact?, op_sys, resolution?, bug_file_loc?, short_desc?, keywords*, status_whiteboard?, dependson*, blocks*, cc*, long_desc*, attachment*)?)>
+<!ATTLIST bug
+	error (NotFound | NotPermitted | InvalidBugId) #IMPLIED
+>
+<!ELEMENT bug_id (#PCDATA)>
+<!ELEMENT exporter (#PCDATA)>
+<!ELEMENT urlbase (#PCDATA)>
+<!ELEMENT bug_status (#PCDATA)>
+<!ELEMENT product (#PCDATA)>
+<!ELEMENT priority (#PCDATA)>
+<!ELEMENT version (#PCDATA)>
+<!ELEMENT rep_platform (#PCDATA)>
+<!ELEMENT assigned_to (#PCDATA)>
+<!ELEMENT delta_ts (#PCDATA)>
+<!ELEMENT component (#PCDATA)>
+<!ELEMENT reporter (#PCDATA)>
+<!ELEMENT target_milestone (#PCDATA)>
+<!ELEMENT bug_severity (#PCDATA)>
+<!ELEMENT creation_ts (#PCDATA)>
+<!ELEMENT qa_contact (#PCDATA)>
+<!ELEMENT status_whiteboard (#PCDATA)>
+<!ELEMENT op_sys (#PCDATA)>
+<!ELEMENT resolution (#PCDATA)>
+<!ELEMENT bug_file_loc (#PCDATA)>
+<!ELEMENT short_desc (#PCDATA)>
+<!ELEMENT keywords (#PCDATA)>
+<!ELEMENT dependson (#PCDATA)>
+<!ELEMENT blocks (#PCDATA)>
+<!ELEMENT cc (#PCDATA)>
+<!ELEMENT long_desc (who, bug_when, thetext)>
+<!ELEMENT who (#PCDATA)>
+<!ELEMENT bug_when (#PCDATA)>
+<!ELEMENT thetext (#PCDATA)>
+<!ELEMENT attachment (attachid, date, desc, type?, data?)>
+<!ELEMENT attachid (#PCDATA)>
+<!ELEMENT date (#PCDATA)>
+<!ELEMENT desc (#PCDATA)>
+<!ELEMENT type (#PCDATA)>
+<!ELEMENT data (#PCDATA)>

mozilla/webtools/bugzilla/changepassword.cgi

@@ -0,0 +1,39 @@
+#!/usr/bonsaitools/bin/perl -wT
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Terry Weissman <terry@mozilla.org>
+
+use strict;
+
+print q{Content-type: text/html
+
+<HTML>
+<HEAD>
+<META HTTP-EQUIV="Refresh"
+  CONTENT="0; URL=userprefs.cgi">
+</HEAD>
+<BODY>
+This URL is obsolete.  Forwarding you to the correct one.
+<P>
+Going to <A HREF="userprefs.cgi">userprefs.cgi</A>
+<BR>
+</BODY>
+</HTML>
+}

mozilla/webtools/bugzilla/colchange.cgi

@@ -0,0 +1,124 @@
+#!/usr/bonsaitools/bin/perl -wT
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Terry Weissman <terry@mozilla.org>
+
+use diagnostics;
+use strict;
+
+use lib qw(.);
+
+use vars qw(
+  @legal_keywords
+  $buffer
+  $template
+  $vars
+);
+
+require "CGI.pl";
+
+print "Content-type: text/html\n";
+
+# The master list not only says what fields are possible, but what order
+# they get displayed in.
+
+ConnectToDatabase();
+GetVersionTable();
+
+my @masterlist = ("opendate", "changeddate", "severity", "priority",
+                  "platform", "owner", "reporter", "status", "resolution",
+                  "product", "component", "version", "os", "votes");
+
+if (Param("usetargetmilestone")) {
+    push(@masterlist, "target_milestone");
+}
+if (Param("useqacontact")) {
+    push(@masterlist, "qa_contact");
+}
+if (Param("usestatuswhiteboard")) {
+    push(@masterlist, "status_whiteboard");
+}
+if (@::legal_keywords) {
+    push(@masterlist, "keywords");
+}
+
+
+push(@masterlist, ("summary", "summaryfull"));
+
+$vars->{masterlist} = \@masterlist;
+
+my @collist;
+if (defined $::FORM{'rememberedquery'}) {
+    my $splitheader = 0;
+    if (defined $::FORM{'resetit'}) {
+        @collist = @::default_column_list;
+    } else {
+        foreach my $i (@masterlist) {
+            if (defined $::FORM{"column_$i"}) {
+                push @collist, $i;
+            }
+        }
+        if (exists $::FORM{'splitheader'}) {
+            $splitheader = $::FORM{'splitheader'};
+        }
+    }
+    my $list = join(" ", @collist);
+    my $urlbase = Param("urlbase");
+    my $cookiepath = Param("cookiepath");
+    print "Set-Cookie: COLUMNLIST=$list ; path=$cookiepath ; expires=Sun, 30-Jun-2029 00:00:00 GMT\n";
+    print "Set-Cookie: SPLITHEADER=$::FORM{'splitheader'} ; path=$cookiepath ; expires=Sun, 30-Jun-2029 00:00:00 GMT\n";
+    print "Refresh: 0; URL=buglist.cgi?$::FORM{'rememberedquery'}\n";
+    print "\n";
+    print "<META HTTP-EQUIV=Refresh CONTENT=\"1; URL=$urlbase"."buglist.cgi?$::FORM{'rememberedquery'}\">\n";
+    print "<TITLE>What a hack.</TITLE>\n";
+    PutHeader ("Change columns");
+    print "Resubmitting your query with new columns...\n";
+    exit;
+}
+
+if (defined $::COOKIE{'COLUMNLIST'}) {
+    @collist = split(/ /, $::COOKIE{'COLUMNLIST'});
+} else {
+    @collist = @::default_column_list;
+}
+
+$vars->{collist} = \@collist;
+
+$vars->{splitheader} = 0;
+if ($::COOKIE{'SPLITHEADER'}) {
+    $vars->{splitheader} = 1;
+}
+
+my %desc = ();
+foreach my $i (@masterlist) {
+    $desc{$i} = $i;
+}
+
+$desc{'summary'} = "Summary (first 60 characters)";
+$desc{'summaryfull'} = "Full Summary";
+
+$vars->{desc} = \%desc;
+$vars->{buffer} = $::buffer;
+
+# Generate and return the UI (HTML page) from the appropriate template.
+print "Content-type: text/html\n\n";
+$template->process("list/change-columns.html.tmpl", $vars)
+  || ThrowTemplateError($template->error());
+

mozilla/webtools/bugzilla/collectstats.pl

@@ -0,0 +1,202 @@
+#!/usr/bonsaitools/bin/perl -w
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Terry Weissman <terry@mozilla.org>,
+#                 Harrison Page <harrison@netscape.com>
+#         Gervase Markham <gerv@gerv.net>
+
+# Run me out of cron at midnight to collect Bugzilla statistics.
+
+
+use AnyDBM_File;
+use diagnostics;
+use strict;
+use vars @::legal_product;
+
+require "globals.pl";
+
+# tidy up after graphing module
+if (chdir("graphs")) {
+    unlink <./*.gif>;
+    unlink <./*.png>;
+    chdir("..");
+}
+
+ConnectToDatabase(1);
+GetVersionTable();
+
+my @myproducts;
+push( @myproducts, "-All-", @::legal_product );
+
+foreach (@myproducts) {
+    my $dir = "data/mining";
+
+    &check_data_dir ($dir);
+    &collect_stats ($dir, $_);
+}
+
+&calculate_dupes();
+
+sub check_data_dir {
+    my $dir = shift;
+
+    if (! -d) {
+        mkdir $dir, 0777;
+        chmod 0777, $dir;
+    }
+}
+
+sub collect_stats {
+    my $dir = shift;
+    my $product = shift;
+    my $when = localtime (time);
+
+    # NB: Need to mangle the product for the filename, but use the real
+    # product name in the query
+    my $file_product = $product;
+    $file_product =~ s/\//-/gs;
+    my $file = join '/', $dir, $file_product;
+    my $exists = -f $file;
+
+    if (open DATA, ">>$file") {
+        push my @row, &today;
+
+        foreach my $status ('NEW', 'ASSIGNED', 'REOPENED', 'UNCONFIRMED', 'RESOLVED', 'VERIFIED', 'CLOSED') {
+            if( $product eq "-All-" ) {
+                SendSQL("select count(bug_status) from bugs where bug_status='$status'");
+            } else {
+                SendSQL("select count(bug_status) from bugs where bug_status='$status' and product='$product'");
+            }
+
+            push @row, FetchOneColumn();
+        }
+
+        foreach my $resolution ('FIXED', 'INVALID', 'WONTFIX', 'LATER', 'REMIND', 'DUPLICATE', 'WORKSFORME', 'MOVED') {
+            if( $product eq "-All-" ) {
+                SendSQL("select count(resolution) from bugs where resolution='$resolution'");
+            } else {
+                SendSQL("select count(resolution) from bugs where resolution='$resolution' and product='$product'");
+            }
+
+            push @row, FetchOneColumn();
+        }
+
+        if (! $exists) {
+            print DATA <<FIN;
+# Bugzilla Daily Bug Stats
+#
+# Do not edit me! This file is generated.
+#
+# fields: DATE|NEW|ASSIGNED|REOPENED|UNCONFIRMED|RESOLVED|VERIFIED|CLOSED|FIXED|INVALID|WONTFIX|LATER|REMIND|DUPLICATE|WORKSFORME|MOVED
+# Product: $product
+# Created: $when
+FIN
+        }
+
+        print DATA (join '|', @row) . "\n";
+        close DATA;
+    } else {
+        print "$0: $file, $!";
+    }
+}
+
+sub calculate_dupes {
+    SendSQL("SELECT * FROM duplicates");
+
+    my %dupes;
+    my %count;
+    my @row;
+    my $key;
+    my $changed = 1;
+
+    my $today = &today_dash;
+
+    # Save % count here in a date-named file
+    # so we can read it back in to do changed counters
+    # First, delete it if it exists, so we don't add to the contents of an old file
+    if (my @files = <data/duplicates/dupes$today*>) {
+        unlink @files;
+    }
+   
+    dbmopen(%count, "data/duplicates/dupes$today", 0644) || die "Can't open DBM dupes file: $!";
+
+    # Create a hash with key "a bug number", value "bug which that bug is a
+    # direct dupe of" - straight from the duplicates table.
+    while (@row = FetchSQLData()) {
+        my $dupe_of = shift @row;
+        my $dupe = shift @row;
+        $dupes{$dupe} = $dupe_of;
+    }
+
+    # Total up the number of bugs which are dupes of a given bug
+    # count will then have key = "bug number", 
+    # value = "number of immediate dupes of that bug".
+    foreach $key (keys(%dupes)) 
+    {
+        my $dupe_of = $dupes{$key};
+
+        if (!defined($count{$dupe_of})) {
+            $count{$dupe_of} = 0;
+        }
+
+        $count{$dupe_of}++;
+    }   
+
+    # Now we collapse the dupe tree by iterating over %count until
+    # there is no further change.
+    while ($changed == 1)
+    {
+        $changed = 0;
+        foreach $key (keys(%count)) {
+            # if this bug is actually itself a dupe, and has a count...
+            if (defined($dupes{$key}) && $count{$key} > 0) {
+                # add that count onto the bug it is a dupe of,
+                # and zero the count; the check is to avoid
+                # loops
+                if ($count{$dupes{$key}} != 0) {
+                    $count{$dupes{$key}} += $count{$key};
+                    $count{$key} = 0;
+                    $changed = 1;
+                }
+            }
+        }
+    }
+
+    # Remove the values for which the count is zero
+    foreach $key (keys(%count))
+    {
+        if ($count{$key} == 0) {
+            delete $count{$key};
+        }
+    }
+   
+    dbmclose(%count);
+}
+
+sub today {
+    my ($dom, $mon, $year) = (localtime(time))[3, 4, 5];
+    return sprintf "%04d%02d%02d", 1900 + $year, ++$mon, $dom;
+}
+
+sub today_dash {
+    my ($dom, $mon, $year) = (localtime(time))[3, 4, 5];
+    return sprintf "%04d-%02d-%02d", 1900 + $year, ++$mon, $dom;
+}
+

mozilla/webtools/bugzilla/confirmhelp.html

@@ -0,0 +1,168 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html><head>
+
+<!--
+     The contents of this file are subject to the Mozilla Public
+     License Version 1.1 (the "License"); you may not use this file
+     except in compliance with the License. You may obtain a copy of
+     the License at http://www.mozilla.org/MPL/
+    
+     Software distributed under the License is distributed on an "AS
+     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+     implied. See the License for the specific language governing
+     rights and limitations under the License.
+    
+     The Original Code is the Bugzilla Bug Tracking System.
+    
+     The Initial Developer of the Original Code is Netscape Communications
+     Corporation. Portions created by Netscape are
+     Copyright (C) 2000 Netscape Communications Corporation. All
+     Rights Reserved.
+    
+     Contributor(s): Terry Weissman <terry@mozilla.org>
+-->
+
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<title>Understanding the UNCONFIRMED state, and other recent changes</title>
+</head>
+
+<body>
+<h1>Understanding the UNCONFIRMED state, and other recent changes</h1>
+
+<p>
+[This document is aimed primarily at people who have used Bugzilla
+before the UNCONFIRMED state was implemented.  It might be helpful for
+newer users as well.]
+</p>
+
+<p>
+
+New bugs in some products will now show up in a new state,
+UNCONFIRMED.  This means that we have nobody has confirmed that the
+bug is real.  Very busy engineers will probably generally ignore
+UNCONFIRMED that have been assigned to them, until they have been
+confirmed in one way or another.  (Engineers with more time will
+hopefully glance over their UNCONFIRMED bugs regularly.)
+</p>
+
+<p>
+The <a href="bug_status.html">page describing bug fields</a> has been
+updated to include UNCONFIRMED.
+</p>
+
+<p>
+There are two basic ways that a bug can become confirmed (and enter
+the NEW) state.
+</p>
+
+<ul>
+  <li> A user with the appropriate permissions (see below for more on
+       permissions) decides that the bug is a valid one, and confirms
+       it.  We hope to gather a small army of responsible volunteers
+       to regularly go through bugs for us.</li>
+  <li> The bug gathers a certain number of votes. <b>Any</b> valid Bugzilla user may vote for 
+bugs (each user gets a certain number of bugs); any UNCONFIRMED bug which 
+gets enough votes becomes automatically confirmed, and enters the NEW state.</li>
+</ul>
+
+<p>
+One implication of this is that it is worth your time to search the
+bug system for duplicates of your bug to vote on them, before
+submitting your own bug.  If we can spread around knowledge of this
+fact, it ought to help cut down the number of duplicate bugs in the
+system. 
+</p>
+
+<h2>Permissions.</h2>
+
+<p>
+Users now have a certain set of permissions.  To see your permissions,
+check out the
+<a href="userprefs.cgi?bank=permissions">user preferences</a> page.
+</p>
+
+<p>
+If you have the "Can confirm a bug" permission, then you will be able
+to move UNCONFIRMED bugs into the NEW state.
+</p>
+
+<p>
+If you have the "Can edit all aspects of any bug" permission, then you
+can tweak anything about any bug.  If not, you may only edit those
+bugs that you have submitted, or that you have assigned to you (or
+qa-assigned to you).  However, anyone may add a comment to any bug.
+</p>
+
+<p>
+Some people (initially, the initial owners and initial qa-contacts for
+components in the system) have the ability to give the above two
+permissions to other people.  So, if you really feel that you ought to
+have one of these permissions, a good person to ask (via private
+email, please!) is the person who is assigned a relevant bug.
+</p>
+
+<h2>Other details.</h2>
+
+<p>
+An initial stab was taken to decide who would be given which of the
+above permissions.  This was determined by some simple heurstics of
+who was assigned bugs, and who the default owners of bugs were, and a
+look at people who seem to have submitted several bugs that appear to
+have been interesting and valid.  Inevitably, we have failed to give
+someone the permissions they deserve.  Please don't take it
+personally; just bear with us as we shake out the new system.
+</p>
+
+<p>
+People with one of the two bits above can easily confirm their own
+bugs, so bugs they submit will actually start out in the NEW state.
+They can override this when submitting a bug.
+</p>
+
+<p>
+People can ACCEPT or RESOLVE a bug assigned to them, even if they
+aren't allowed to confirm it.  However, the system remembers, and if
+the bug gets REOPENED or reassigned to someone else, it will revert
+back to the UNCONFIRMED state.  If the bug has ever been confirmed,
+then REOPENing or reassigning will cause it to go to the NEW or
+REOPENED state.
+</p>
+
+<p>
+Note that only some products support the UNCONFIRMED state.  In other
+products, all new bugs will automatically start in the NEW state.
+</p>
+
+<h2>Things still to be done.</h2>
+
+<p>
+There probably ought to be a way to get a bug back into the
+UNCONFIRMED state, but there isn't yet.
+</p>
+
+<p>
+If a person has submitted several bugs that get confirmed, then this
+is probably a person who understands the system well, and deserves the
+"Can confirm a bug" permission.  This kind of person should be
+detected and promoted automatically.
+</p>
+
+<p>
+There should also be a way to automatically promote people to get the
+"Can edit all aspects of any bug" permission.
+</p>
+
+<p>
+The "enter a new bug" page needs to be revamped with easy ways for new
+people to educate themselves on the benefit of searching for a bug
+like the one they're about to submit and voting on it, rather than
+adding a new useless duplicate.
+</p>
+
+<hr>
+<p>
+<!-- hhmts start -->
+Last modified: Sun Apr 14 12:55:14 EST 2002
+<!-- hhmts end -->
+</p>
+</body> </html>

mozilla/webtools/bugzilla/contrib/BugzillaEmail.pm

@@ -0,0 +1,79 @@
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# This code is based on code found in bug_email.pl from the bugzilla
+# email tracker.  Initial contributors are :: 
+#                 Terry Weissman <terry@mozilla.org>
+#                 Gregor Fischer <fischer@suse.de>
+#                 Klaas Freitag  <freitag@suse.de>
+#                 Seth Landsman  <seth@dworkin.net>
+
+# The purpose of this module is to abstract out a bunch of the code
+#  that is central to email interfaces to bugzilla and its database
+
+# Contributor : Seth Landsman <seth@dworkin.net>
+
+# Initial checkin : 03/15/00 (SML)
+#  findUser() function moved from bug_email.pl to here
+
+push @INC, "../."; # this script now lives in contrib
+
+require "globals.pl";
+
+use diagnostics;
+use strict;
+
+my $EMAIL_TRANSFORM_NONE = "email_transform_none";
+my $EMAIL_TRANSFORM_BASE_DOMAIN = "email_transform_base_domain";
+my $EMAIL_TRANSFORM_NAME_ONLY = "email_transform_name_only";
+
+# change to do incoming email address fuzzy matching
+my $email_transform = $EMAIL_TRANSFORM_NAME_ONLY;
+
+# findUser()
+# This function takes an email address and returns the user email.
+# matching is sloppy based on the $email_transform parameter
+sub findUser($) {
+  my ($address) = @_;
+  # if $email_transform is $EMAIL_TRANSFORM_NONE, return the address, otherwise, return undef
+  if ($email_transform eq $EMAIL_TRANSFORM_NONE) {
+    my $stmt = "SELECT login_name FROM profiles WHERE profiles.login_name = \'$address\';";
+    SendSQL($stmt);
+    my $found_address = FetchOneColumn();
+    return $found_address;
+  } elsif ($email_transform eq $EMAIL_TRANSFORM_BASE_DOMAIN) {
+    my ($username) = ($address =~ /(.+)@/);
+    my $stmt = "SELECT login_name FROM profiles WHERE profiles.login_name RLIKE \'$username\';";
+    SendSQL($stmt);
+
+    my $domain;
+    my $found = undef;
+    my $found_address;
+    my $new_address = undef;
+    while ((!$found) && ($found_address = FetchOneColumn())) {
+      ($domain) = ($found_address =~ /.+@(.+)/);
+      if ($address =~ /$domain/) {
+        $found = 1;
+        $new_address = $found_address;
+      }
+    }
+    return $new_address;
+  } elsif ($email_transform eq $EMAIL_TRANSFORM_NAME_ONLY) {
+    my ($username) = ($address =~ /(.+)@/);
+    my $stmt = "SELECT login_name FROM profiles WHERE profiles.login_name RLIKE \'$username\';";
+    SendSQL($stmt);
+    my $found_address = FetchOneColumn();
+    return $found_address;
+  }
+}
+
+1;

mozilla/webtools/bugzilla/contrib/README

@@ -0,0 +1,22 @@
+This directory contains contributed software related to Bugzilla.
+Things in here have not necessarily been tested or tried by anyone
+except the original contributor, so tred carefully.  But it may still
+be useful to you.
+
+This directory includes:
+
+  mysqld-watcher.pl --  This script can be installed as a frequent cron 
+                        job to clean up stalled/dead queries.
+        gnats2bz.pl --  A perl script to help import bugs from a GNATS 
+                        database into a Bugzilla database.  Contributed by
+                        Tom Schutter <tom@platte.com>
+
+       bug_email.pl --  A perl script that can receive email containing
+                        bug reports (email-interface). Contributed by
+                        Klaas Freitag <freitag@SuSE.de>
+	
+      README.Mailif --  Readme describing the mail interface.
+  bugmail_help.html --  User help page for the mail interface.
+
+       yp_nomail.sh --  Script you can run via cron that regularly updates
+                        the nomail file for terminated employees 

mozilla/webtools/bugzilla/contrib/README.Mailif

@@ -0,0 +1,80 @@
+
+The Bugzilla Mail interface
+===========================
+
+(UPDATE 03/14/00 to better reflect reality by SML)
+
+The Bugzilla Mail interface allows to submit bugs to Bugzilla by email.
+
+The Mail Interface Contribution consists of three files:
+README.Mailif - this readme.
+bug_email.pl  - the script
+bugmail_help.html - a user help html site
+
+Installation:
+
+Next is to add a user who receives the bugmails, e. g. bugmail. Create a 
+mail account and a home directory for the user. 
+
+The mailinterface script bug_email.pl needs to get the mail through stdin.
+I use procmail for that, with the following line in the .procmailrc:
+
+BUGZILLA_HOME=/usr/local/httpd/htdocs/bugzilla
+:0 c
+|(cd $BUGZILLA_HOME/contrib; ./bug_email.pl)
+
+This defines the Bugzilla directory as the variable BUGZILLA_HOME and passes
+all incoming mail to the script after cd'ing into the bugzilla home.
+
+In some cases, it is necessary to alter the headers of incoming email.  The 
+additional line to procmail :
+
+:0 fhw
+| formail -I "From " -a "From "
+
+fixes many problems.
+
+See bugzilla.procmailrc for a sample procmailrc that works for me (SML) and
+also deals with bugzilla_email_append.pl
+
+Customation:
+
+There are some values inside the script which need to be customized for your
+needs:
+
+1. In sub-routine Reply (search 'sub Reply':
+there is the line
+    print MAIL "From: Bugzilla Mailinterface<yourmail\@here.com>\n";
+                                            ^^^^^^^^^^^^^^^^^^^^
+Fill in your correct mail here. That will make it easy for people to reply
+to the mail.
+
+2. check, if your sendmail resides in /usr/sbin/sendmail, change the path if neccessary.
+Search the script after 'default' - you find some default-Settings for bug
+reports, which are used, if the sender did not send a field for it. The defaults
+should be checked and changed.
+
+Thats hopefully all, we will come up with any configuration file or something.
+
+
+If your mail works, your script will insert mails from now on.
+
+The mailinterface supports two commandline switches:
+
+There are two command line switches :
+
+-t: Testmode
+    The mailinterface does not really insert the bug into the database, but
+    writes some debug output to stdout and writes the mail into the file
+    bug_email_test.log in the data-dir.
+
+-r: restricted mode
+    All lines before the first line with a keyword character are skipped.
+    In not restricted, default mode, these lines are added to the long 
+    description of the bug.
+
+
+02/2000 - Klaas Freitag, SuSE GmbH <freitag@suse.de>
+03/2000 - Seth M. Landsman <seth@cs.brandeis.edu>
+ bug_email.pl now lives out of bugzilla/contrib
+ added line about formail

mozilla/webtools/bugzilla/contrib/bugmail_help.html

@@ -0,0 +1,223 @@
+<HTML>
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
+<!--
+     The contents of this file are subject to the Mozilla Public
+     License Version 1.1 (the "License"); you may not use this file
+     except in compliance with the License. You may obtain a copy of
+     the License at http://www.mozilla.org/MPL/
+    
+     Software distributed under the License is distributed on an "AS
+     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+     implied. See the License for the specific language governing
+     rights and limitations under the License.
+    
+     The Original Code is the Bugzilla Bug Tracking System.
+    
+     Contributor(s): Klaas Freitag <Freitag@SuSE.de>
+-->
+
+<HEAD> <TITLE>Bugzilla Mail Interface</TITLE> </HEAD>
+<BODY BGCOLOR="#FFFFFF">
+<CENTER><H1>The Bugzilla Mail Interface</H1>
+Contributor: <A HREF="mailto:freitag@suse.de">Klaas Freitag</A>, SuSE GmbH 
+</CENTER>
+<P>
+The bugzilla Mail interface allows the registered bugzilla users to submit bugs by 
+sending email with a bug description. This is usefull for people, who do not work 
+inhouse and want to submitt bugs to the bugzilla system.
+<p>
+
+
+I know, show me the <A HREF="#examplemail">example-mail !</A>
+
+
+<H2>What do you need to do to submitt a bug by mail ?</H2>
+You need to send a email in the described format to the bugmail-user of the 
+bugzilla-system. This is <A HREF="mailto:our_bugzilla@xyz.com">yourbugzilla@here.com</A>
+
+You receive a reply mail with the new bug-ID if your request was ok. 
+If not, you get a mail with 
+some help on the bugmail system and a specific analysis of your request.
+<P>
+Please dont refuse to send one or two wrong mails, you will get all the information 
+you need in the replies, and <I>only</I> in the mail replies. The information on this
+page, concerning available products, versions and so on, is not dynamicly generated and 
+may  be old therefore.
+
+<H1>The Mail Format</H1>
+The bugmail needs a special format , which consists of some keywords and suitable 
+values for them and a description text. Note that the keyword block needs to be
+above of the description text.
+
+<H2>Keywords</H2>
+You need to tell bugzilla some properties of the bugs. This is done by keywords, which
+start on a new line with a @, followed by the keyword and and equal-sign, followed by a
+hopefully valid value.
+
+
+<TABLE BORDER=4 FRAME=box CELLSPACING="5" width=95%> <COLGROUP> <col width="2*"> 
+<col width="5*"> <col width="1*"> </COLGROUP>
+	<TR>
+		<TH>Keyword</TH>
+		<TH>Value description</TH>
+		<TH>required and default value</TH>
+	</TR>
+	<TR>
+	        <TD>@product</TD>
+	        <TD>The product which has a bug</TD>
+	        <TD>yes. <br> This is the most important information. Many other
+		fields depend on the product.</TD>
+	</TR>
+	<TR>
+	        <TD>@component</TD>
+	        <TD>the desired component which is affected by the bug</TD>
+	        <TD>yes. <br> As the @product, this is a very important 
+		field.</TD>
+	</TR>
+	<TR>
+	        <TD>@version</TD>
+	        <TD>The version of the product</TD>
+	        <TD>yes. <br>See @product and @component</TD>
+	</TR>
+	<TR>
+	        <TD>@short_desc</TD>
+	        <TD>A summary of your bug report</TD>
+	        <TD>yes. <br>This summary of the error you want to report 
+		describes what happen. You may skip the long description,
+		but not this summary.<br>
+		<b>Note:</b>The short description may be given in the mail subject
+		instead of using the keyword !</TD>
+	</TR>
+	<TR>
+	        <TD>@rep_platform</TD>
+	        <TD>The desired platform</TD>
+	        <TD>no.<br>If you dont give a value, this field is set to <I>All</I>.</TD>
+	</TR>
+	<TR>
+	        <TD>@bug_severity</TD>
+	        <TD>The severity of the bug</TD>
+	        <TD>no. <br> If you dont give a value, this field is set to 
+		<I>normal</I></TD>
+	</TR>
+	<TR>
+	        <TD>@priority</TD>
+	        <TD>The priority of the bug</TD>
+	        <TD>no.<br>If you dont give a value, this field is set to <I>P3</I></TD>
+	</TR>
+	<TR>
+	        <TD>@op_sys</TD>
+	        <TD>The operating system</TD>
+	        <TD>no.<br>If you dont give a value, this field is set to <I>Linux</I>.</TD>
+	</TR>
+	<TR>
+	        <TD>@assigned_to</TD>
+	        <TD>The one to whom the bug is assigned to</TD>
+	        <TD>no. <br>There is an initial owner for every product/version/component.
+		He owns the bug by default. The initial owner can only be found if 
+		product, version and component are valid.</TD>
+	</TR>
+	<TR>
+	        <TD>@bug_file_loc</TD>
+	        <TD>?</TD>
+	        <TD>no.</TD>
+	</TR>
+	<TR>
+	        <TD>@status_whiteboard</TD>
+	        <TD>?</TD>
+	        <TD>no.</TD>
+	</TR>
+	<TR>
+	        <TD>@target_milestone</TD>
+	        <TD>?</TD>
+	        <TD>no.</TD>
+	</TR>
+	<TR>
+	        <TD>@groupset</TD>
+	        <TD>rules the visibility of the bug.</TD>
+	        <TD>no.<br>This value defaults to the smallest of the available groups,
+		which is <I>readInternal</I>.</TD>
+	</TR>
+	<TR>
+	        <TD>@qa_contact</TD>
+	        <TD>the quality manager for the product</TD>
+	        <TD>no.<br>This value can be retrieved from product, component and 
+		version</TD>
+	</TR>
+
+</TABLE>
+<H2>Valid values</H2>
+Give string values for the most keys above. Some keywords  require special values:<br>
+<ol>
+<li>E-Mail adresses: If you want to set the qa-contact, specify a email-adress for @qa_contact. The email must be known by bugzilla of course.</li>
+<li>Listvalues: Most of the values have to be one of a list of valid values. Try by sending
+a mail and read the reply. Skip fields if you dont get help for them unless you dont know
+which values you may choose.</li>
+<li>free Text: The descriptions may be free text. </li>
+<li>Special: The field groupset may be specified in different in three different kinds:
+ <ol>
+    <li> A plain numeric way, which is one usually huge number, e. g. <I>65536</I></li>
+    <li> a string with added numbers e.g. <I>65536+131072</I></li>
+    <li> a string list, e.g. <I>ReadInternal, ReadBeta </I></li>
+ </ol>
+</li>
+</ol>
+
+<p>
+
+But most of them need <b>valid</b> values.
+<p>
+Sorry, you will not find lists of valid products, components and the other stuff
+here. Send a mail to with any text, and you will get a list of valid keywords in the reply.
+
+<p>
+Some of the values must be choosen from a list:<br>
+<ol>
+  <li>bug_severity: blocker, critical, major, normal, minor, trivial, enhancement</li>
+  <li>op_sys: Linux </li>
+  <li>priority: P1, P2, P3, P4, P5</li>
+  <li>rep_platform: All, i386, AXP, i686, Other</li></ol>
+  
+
+<p>
+
+After you have specified the required keywords and maybe some other value, you may 
+describe your bug. You dont need  a keyword for starting your bug description. All 
+text which follows the keyword block is handled as long description of the bug.
+<p>
+
+The bugmail interface is able to find required information by itself. E.g. if you specify
+a product which has exactly one component, this component will be found by the interface
+automatically. 
+
+<H1>Attachments</H1>
+
+The mail interface is able to cope with MIME-attachments. 
+People could for example add a logfile as a mail attachment, and it will appear in 
+bugzilla as attachment. A comment for the attachment should be added, it will describe
+the attachment in bugzilla.
+
+<H1><A NAME="examplemail">Example Mail</A></H1>
+
+See the example of the mail <b>body</b> (Dont forget to specify the short description
+in the mail subject):<hr><pre>
+
+  @product      = Bugzilla
+  @component    = general
+  @version      = All
+  @groupset     = ReadWorld ReadPartners
+  @op_sys       = Linux
+  @priority     = P3
+  @rep_platform = i386
+
+
+  This is the description of the bug I found. It is not neccessary to start
+  it with a keyword. 
+
+  Note: The short_description is neccessary and may be given with the keyword
+  @short_description or will be retrieved from the mail subject.
+
+
+</pre><hr>
+
+</BODY>
+</HTML>

mozilla/webtools/bugzilla/contrib/bugzilla.procmailrc

@@ -0,0 +1,30 @@
+:0 fhw
+| formail -I "From " -a "From "
+
+BUGZILLA_HOME=/home/bugzilla/WEB/bugzilla/contrib
+
+:0
+* ^Subject: .*\[Bug .*\]
+RESULT=|(cd $BUGZILLA_HOME && ./bugzilla_email_append.pl)
+
+
+# Feed mail to stdin of bug_email.pl
+:0 Ec
+#* !^Subject: .*[Bug .*]
+RESULT=|(cd $BUGZILLA_HOME && ./bug_email.pl )
+
+# write result to a logfile
+:0 c
+|echo `date '+%d.%m.%y %H:%M:  '` $RESULT >> $HOME/bug_email.log
+
+
+:0 c
+|echo "----------------------------------" >> $HOME/bug_email.log
+
+:0 c
+$HOME/bug_email.log
+ 
+# Move mail to the inbox
+:0
+$HOME/Mail/INBOX
+

mozilla/webtools/bugzilla/contrib/bugzilla_email_append.pl

@@ -0,0 +1,189 @@
+#!/usr/bin/perl -w
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+
+# The purpose of this script is to take an email message, which
+# specifies a bugid and append it to the bug as part of the longdesc
+# table
+
+# Contributor : Seth M. Landsman <seth@dworkin.net>
+
+# 03/15/00 : Initial version by SML
+# 03/15/00 : processmail gets called
+
+# Email subject must be of format :
+# .* Bug ### .*
+# replying to a typical bugzilla email should be valid
+
+# TODO : 
+# 1. better way to get the body text (I don't know what dump_entity() is 
+#   actually doing
+
+use diagnostics;
+use strict;
+use MIME::Parser;
+
+push @INC, "../."; # this script lives in contrib
+require "globals.pl";
+require "BugzillaEmail.pm";
+
+# Create a new MIME parser:
+my $parser = new MIME::Parser;
+
+my $Comment = "";
+
+# Create and set the output directory:
+# FIXME: There should be a $BUGZILLA_HOME variable (SML)
+(-d "../data/mimedump-tmp") or mkdir "../data/mimedump-tmp",0755 or die "mkdir: $!";
+(-w "../data/mimedump-tmp") or die "can't write to directory";
+
+$parser->output_dir("../data/mimedump-tmp");
+    
+# Read the MIME message:
+my $entity = $parser->read(\*STDIN) or die "couldn't parse MIME stream";
+$entity->remove_sig(10);          # Removes the signature in the last 10 lines
+
+# Getting values from parsed mail
+my $Sender = $entity->get( 'From' );
+$Sender ||=  $entity->get( 'Reply-To' );
+my $Message_ID = $entity->get( 'Message-Id' );
+
+die (" *** Cant find Sender-adress in sent mail ! ***\n" ) unless defined( $Sender );
+chomp( $Sender );
+chomp( $Message_ID );
+
+print "Dealing with the sender $Sender\n";
+
+ConnectToDatabase();
+
+my $SenderShort = $Sender;
+$SenderShort =~ s/^.*?([a-zA-Z0-9_.-]+?\@[a-zA-Z0-9_.-]+\.[a-zA-Z0-9_.-]+).*$/$1/;
+
+$SenderShort = findUser($SenderShort);
+
+print "SenderShort is $SenderShort\n";
+if (!defined($SenderShort)) {
+  $SenderShort = $Sender;
+  $SenderShort =~ s/^.*?([a-zA-Z0-9_.-]+?\@[a-zA-Z0-9_.-]+\.[a-zA-Z0-9_.-]+).*$/$1/;
+}
+print "The sendershort is now $SenderShort\n";
+
+if (!defined($SenderShort)) {
+  DealWithError("No such user $SenderShort exists.");
+}
+
+my $Subject = $entity->get('Subject');
+print "The subject is $Subject\n";
+
+my ($bugid) = ($Subject =~ /\[Bug ([\d]+)\]/);
+print "The bugid is $bugid\n";
+
+# make sure the bug exists
+
+SendSQL("SELECT bug_id FROM bugs WHERE bug_id = $bugid;");
+my $found_id = FetchOneColumn();
+print "Did we find the bug? $found_id-\n";
+if (!defined($found_id)) {
+  DealWithError("Bug $bugid does not exist");
+}
+
+# get the user id
+SendSQL("SELECT userid FROM profiles WHERE login_name = \'$SenderShort\';");
+my $userid = FetchOneColumn();
+if (!defined($userid)) {
+  DealWithError("Userid not found for $SenderShort");
+}
+
+# parse out the text of the message
+dump_entity($entity);
+
+# Get rid of the bug id
+$Subject =~ s/\[Bug [\d]+\]//;
+#my $Comment = "This is only a test ...";
+my $Body = "Subject: " . $Subject . "\n" . $Comment;
+
+# shove it in the table
+my $long_desc_query = "INSERT INTO longdescs SET bug_id=$found_id, who=$userid, bug_when=NOW(), thetext=" . SqlQuote($Body) . ";";
+SendSQL($long_desc_query);
+
+system("cd .. ; ./processmail $found_id '$SenderShort'");
+
+sub DealWithError {
+  my ($reason) = @_;
+  print $reason . "\n";
+}
+
+# Yanking this wholesale from bug_email, 'cause I know this works.  I'll
+#  figure out what it really does later
+#------------------------------
+#
+# dump_entity ENTITY, NAME
+#
+# Recursive routine for parsing a mime coded mail.
+# One mail may contain more than one mime blocks, which need to be
+# handled. Therefore, this function is called recursively.
+#
+# It gets the for bugzilla important information from the mailbody and 
+# stores them into the global attachment-list @attachments. The attachment-list
+# is needed in storeAttachments.
+#
+sub dump_entity {
+    my ($entity, $name) = @_;
+    defined($name) or $name = "'anonymous'";
+    my $IO;
+
+
+    # Output the body:
+    my @parts = $entity->parts;
+    if (@parts) {                     # multipart...
+	my $i;
+	foreach $i (0 .. $#parts) {       # dump each part...
+	    dump_entity($parts[$i], ("$name, part ".(1+$i)));
+	}
+    } else {                            # single part...	
+
+	# Get MIME type, and display accordingly...
+	my $msg_part = $entity->head->get( 'Content-Disposition' );
+	
+	$msg_part ||= ""; 
+
+	my ($type, $subtype) = split('/', $entity->head->mime_type);
+	my $body = $entity->bodyhandle;
+	my ($data, $on_disk );
+
+	if(  $msg_part =~ /^attachment/ ) {
+	    # Attached File
+	    my $des = $entity->head->get('Content-Description');
+	    $des ||= "";
+
+	    if( defined( $body->path )) { # Data is on disk
+		$on_disk = 1;
+		$data = $body->path;
+		
+	    } else {                      # Data is in core
+		$on_disk = 0;
+		$data = $body->as_string;
+	    }
+#	    push ( @attachments, [ $data, $entity->head->mime_type, $on_disk, $des ] );
+	} else {
+	    # Real Message
+	    if ($type =~ /^(text|message)$/) {     # text: display it...
+		if ($IO = $body->open("r")) {
+		    $Comment .=  $_ while (defined($_ = $IO->getline));
+		    $IO->close;
+		} else {       # d'oh!
+		    print "$0: couldn't find/open '$name': $!";
+		}
+	    } else { print "Oooops - no Body !\n"; }
+	}
+    }
+}

mozilla/webtools/bugzilla/contrib/cmdline/buglist

@@ -0,0 +1,94 @@
+#!/bin/sh
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is 
+# Andreas Franke <afranke@ags.uni-sb.de>.
+# Corporation. Portions created by Andreas Franke are
+# Copyright (C) 2001 Andreas Franke. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+conf="`dirname $0`/query.conf"
+
+query="http://bugzilla.mozilla.org/buglist.cgi?cmd=doit"
+defaultcolumnlist="severity priority platform status resolution target_milestone status_whiteboard keywords summaryfull"
+
+chart=0
+and=0
+while test "$1" != ""; do
+    arg=$1
+    arg_len=`expr length ${arg}`
+    if test `expr substr "${arg}" 1 2` == "--"; then
+        eq_pos=`expr match ${arg} '--.*='`
+        if test "${eq_pos}" == "0"; then
+            echo 'Missing value for long option '"${arg}"' ("=" not found)' 1>&2
+            exit 1;
+        fi
+        # extract option name
+        let name_len=${eq_pos}-3
+        name=`expr substr ${arg} 3 ${name_len}`
+        # extract option value
+        let val_start=${eq_pos}+1
+        let val_len=${arg_len}-${eq_pos}
+        val=`expr substr ${arg} ${val_start} ${val_len}`
+    elif test `expr substr ${arg} 1 1` == "-" &&
+         test "`expr substr ${arg} 2 1`" != ""; then
+        # extract
+        name=`expr substr ${arg} 2 1`
+        let val_len=${arg_len}-2
+        val=`expr substr ${arg} 3 ${val_len}`
+    else
+        name="default"
+        val="${arg}"
+        #echo "Unrecognized option ${arg}" 1>&2
+        #exit 1
+    fi
+
+    # find field and comparison type for option ${name}
+    field=`grep '"'${name}'"' ${conf} | awk '{printf $1}'`
+    type=`grep '"'${name}'"' ${conf} | awk '{printf $2}'`
+    if test "${field}" == ""  || test "${type}" == ""; then
+        echo "Field name & comparison type not found for option ${name}." 1>&2
+        exit 1;
+    fi
+
+    or=0
+    while test "${val}" != ""; do
+        comma_idx=`expr index ${val} ,`
+        if test ${comma_idx} == "0"; then
+            val1="${val}"
+            val=""
+        else
+            let val1_len=${comma_idx}-1
+            val1=`expr substr ${val} 1 ${val1_len}`
+            val_len=`expr length ${val}`
+            let rest_start=${comma_idx}+1
+            let rest_len=${val_len}-${comma_idx}
+            val=`expr substr ${val} ${rest_start} ${rest_len}`
+        fi
+        query="${query}&field${chart}-${and}-${or}=${field}"
+        query="${query}&type${chart}-${and}-${or}=${type}"
+        query="${query}&value${chart}-${and}-${or}=${val1}"
+        #echo "----- ${name} : ${field} : ${type} : ${val1} -----" 1>&2
+        let or=${or}+1
+    done
+    let chart=${chart}+1
+    shift
+done
+
+outputfile="/dev/stdout"
+#outputfile="buglist.html"
+#\rm -f ${outputfile}
+wget -q -O ${outputfile} --header="Cookie: COLUMNLIST=${COLUMNLIST-${defaultcolumnlist}}" "${query}"
+

mozilla/webtools/bugzilla/contrib/cmdline/bugs

@@ -0,0 +1,31 @@
+#!/bin/sh
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is 
+# Andreas Franke <afranke@ags.uni-sb.de>.
+# Corporation. Portions created by Andreas Franke are
+# Copyright (C) 2001 Andreas Franke. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+buglist="`dirname $0`/buglist"
+htmlfile="`dirname $0`/buglist.html"
+
+${buglist} "$@" 2>&1 1>${htmlfile}
+if test ${?} == "0"; then
+    echo `grep 'TR VALIGN=TOP ALIGN=LEFT CLASS=' ${htmlfile} | sed -e 's/<TR.*id=//' | sed -e 's/".*//'` | sed -e 's/ /\,/g'
+else
+    cat ${htmlfile} 1>&2
+    exit 1
+fi

mozilla/webtools/bugzilla/contrib/cmdline/query.conf

@@ -0,0 +1,49 @@
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is 
+# Andreas Franke <afranke@ags.uni-sb.de>.
+# Corporation. Portions created by Andreas Franke are
+# Copyright (C) 2001 Andreas Franke. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+#
+# This is `query.conf', the config file for `buglist'.
+#
+# Columns: 1: field_name, 2: comparison_type, 3: cmd-line options
+#
+bug_status              substring       "s","status"
+resolution              substring       "r","resolution"
+rep_platform            substring       "p","platform"
+op_sys                  substring       "o","os","opsys"
+priority                substring       "p","priority"
+bug_severity            substring       "S","severity"
+assigned_to             substring       "A","O","owner","assignedto"
+reporter                substring       "R","reporter"
+qa_contact              substring       "Q","qa","qacontact"
+cc                      substring       "C","cc"
+product                 substring       "product"
+version                 substring       "V","version"
+component               substring       "c","component"
+target_milestone        substring       "M","milestone"
+short_desc              substring       "default","summary"
+longdesc                substring       "d","description","longdesc"
+bug_file_loc            substring       "u","url"
+status_whiteboard       substring       "w","whiteboard"
+keywords                substring       "k","K","keywords"
+attachments.description substring       "attachdesc"
+attachments.thedata     substring       "attachdata"
+attachments.mimetype    substring       "attachmime"
+dependson               substring       # bug 30823
+blocked                 substring       # bug 30823

mozilla/webtools/bugzilla/contrib/cvs-update.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Dawn Endico <endico@mozilla.org>
+
+
+# Keep a record of all cvs updates made from a given directory.
+#
+# Later, if changes need to be backed out, look at the log file
+# and run the cvs command with the date that you want to back
+# out to. (Probably the second to last entry).
+
+#DATE=`date +%e/%m/%Y\ %k:%M:%S\ %Z`
+DATE=`date`
+COMMAND="cvs update -d -P -D" 
+echo $COMMAND \"$DATE\" >> cvs-update.log
+$COMMAND "$DATE"
+
+
+# sample log file
+#cvs update -P -D "11/04/2000 20:22:08 PDT"
+#cvs update -P -D "11/05/2000 20:22:22 PDT"
+#cvs update -P -D "11/07/2000 20:26:29 PDT"
+#cvs update -P -D "11/08/2000 20:27:10 PDT"

mozilla/webtools/bugzilla/contrib/jb2bz.py

@@ -0,0 +1,303 @@
+#!/usr/local/bin/python
+# -*- mode: python -*-
+
+"""
+jb2bz.py - a nonce script to import bugs from JitterBug to Bugzilla
+Written by Tom Emerson, tree@basistech.com
+
+This script is provided in the hopes that it will be useful.  No
+rights reserved. No guarantees expressed or implied. Use at your own
+risk. May be dangerous if swallowed. If it doesn't work for you, don't
+blame me. It did what I needed it to do.
+
+This code requires a recent version of Andy Dustman's MySQLdb interface,
+
+    http://sourceforge.net/projects/mysql-python
+
+Share and enjoy.
+"""
+
+import rfc822, mimetools, multifile, mimetypes
+import sys, re, glob, StringIO, os, stat, time
+import MySQLdb, getopt
+
+# mimetypes doesn't include everything we might encounter, yet.
+if not mimetypes.types_map.has_key('.doc'):
+    mimetypes.types_map['.doc'] = 'application/msword'
+
+if not mimetypes.encodings_map.has_key('.bz2'):
+    mimetypes.encodings_map['.bz2'] = "bzip2"
+
+bug_status='NEW'
+component="default"
+version=""
+product="" # this is required, the rest of these are defaulted as above
+
+"""
+Each bug in JitterBug is stored as a text file named by the bug number.
+Additions to the bug are indicated by suffixes to this:
+
+<bug>
+<bug>.followup.*
+<bug>.reply.*
+<bug>.notes
+
+The dates on the files represent the respective dates they were created/added.
+
+All <bug>s and <bug>.reply.*s include RFC 822 mail headers. These could include
+MIME file attachments as well that would need to be extracted.
+
+There are other additions to the file names, such as
+
+<bug>.notify
+
+which are ignored.
+
+Bugs in JitterBug are organized into directories. At Basis we used the following
+naming conventions:
+
+<product>-bugs         Open bugs
+<product>-requests     Open Feature Requests
+<product>-resolved     Bugs/Features marked fixed by engineering, but not verified
+<product>-verified     Resolved defects that have been verified by QA
+
+where <product> is either:
+
+<product-name>
+
+or
+
+<product-name>-<version>
+"""
+
+def process_notes_file(current, fname):
+    try:
+        new_note = {}
+        notes = open(fname, "r")
+        s = os.fstat(notes.fileno())
+
+        new_note['text']  = notes.read()
+        new_note['timestamp'] = time.gmtime(s[stat.ST_MTIME])
+
+        notes.close()
+
+        current['notes'].append(new_note)
+
+    except IOError:
+        pass
+
+def process_reply_file(current, fname):
+    new_note = {}
+    reply = open(fname, "r")
+    msg = rfc822.Message(reply)
+    new_note['text'] = "%s\n%s" % (msg['From'], msg.fp.read())
+    new_note['timestamp'] = rfc822.parsedate_tz(msg['Date'])
+    current["notes"].append(new_note)
+
+def add_notes(current):
+    """Add any notes that have been recorded for the current bug."""
+    process_notes_file(current, "%d.notes" % current['number'])
+
+    for f in glob.glob("%d.reply.*" % current['number']):
+        process_reply_file(current, f)
+
+    for f in glob.glob("%d.followup.*" % current['number']):
+        process_reply_file(current, f)
+
+def maybe_add_attachment(current, file, submsg):
+    """Adds the attachment to the current record"""
+    cd = submsg["Content-Disposition"]
+    m = re.search(r'filename="([^"]+)"', cd)
+    if m == None:
+        return
+    attachment_filename = m.group(1)
+    if (submsg.gettype() == 'application/octet-stream'):
+        # try get a more specific content-type for this attachment
+        type, encoding = mimetypes.guess_type(m.group(1))
+        if type == None:
+            type = submsg.gettype()
+    else:
+        type = submsg.gettype()
+
+    try:
+        data = StringIO.StringIO()
+        mimetools.decode(file, data, submsg.getencoding())
+    except:
+        return
+
+    current['attachments'].append( ( attachment_filename, type, data.getvalue() ) )
+
+def process_mime_body(current, file, submsg):
+    data = StringIO.StringIO()
+    mimetools.decode(file, data, submsg.getencoding())
+    current['description'] = data.getvalue()
+
+
+
+def process_text_plain(msg, current):
+    print "Processing: %d" % current['number']
+    current['description'] = msg.fp.read()
+
+def process_multi_part(file, msg, current):
+    print "Processing: %d" % current['number']
+    mf = multifile.MultiFile(file)
+    mf.push(msg.getparam("boundary"))
+    while mf.next():
+        submsg = mimetools.Message(file)
+        if submsg.has_key("Content-Disposition"):
+            maybe_add_attachment(current, mf, submsg)
+        else:
+            # This is the message body itself (always?), so process
+            # accordingly
+            process_mime_body(current, mf, submsg)
+
+def process_jitterbug(filename):
+    current = {}
+    current['number'] = int(filename)
+    current['notes'] = []
+    current['attachments'] = []
+    current['description'] = ''
+    current['date-reported'] = ()
+    current['short-description'] = ''
+    
+    file = open(filename, "r")
+    msg = mimetools.Message(file)
+
+    msgtype = msg.gettype()
+
+    add_notes(current)
+    current['date-reported'] = rfc822.parsedate_tz(msg['Date'])
+    current['short-description'] = msg['Subject']
+
+    if msgtype[:5] == 'text/':
+        process_text_plain(msg, current)
+    elif msgtype[:10] == "multipart/":
+        process_multi_part(file, msg, current)
+    else:
+        # Huh? This should never happen.
+        print "Unknown content-type: %s" % msgtype
+        sys.exit(1)
+
+    # At this point we have processed the message: we have all of the notes and
+    # attachments stored, so it's time to add things to the database.
+    # The schema for JitterBug 2.14 can be found at:
+    #
+    #    http://www.trilobyte.net/barnsons/html/dbschema.html
+    #
+    # The following fields need to be provided by the user:
+    #
+    # bug_status
+    # product
+    # version
+    # reporter
+    # component
+    # resolution
+
+    # change this to the user_id of the Bugzilla user who is blessed with the
+    # imported defects
+    reporter=6
+
+    # the resolution will need to be set manually
+    resolution=""
+
+    db = MySQLdb.connect(db='bugs',user='root',host='localhost')
+    cursor = db.cursor()
+
+    cursor.execute( "INSERT INTO bugs SET " \
+                    "bug_id=%s," \
+                    "bug_severity='normal',"  \
+                    "bug_status=%s," \
+                    "creation_ts=%s,"  \
+                    "short_desc=%s," \
+                    "product=%s," \
+                    "rep_platform='All'," \
+                    "assigned_to=%s,"
+                    "reporter=%s," \
+                    "version=%s,"  \
+                    "component=%s,"  \
+                    "resolution=%s",
+                    [ current['number'],
+                      bug_status,
+                      time.strftime("%Y-%m-%d %H:%M:%S", current['date-reported'][:9]),
+                      current['short-description'],
+                      product,
+                      reporter,
+                      reporter,
+                      version,
+                      component,
+                      resolution] )
+
+    # This is the initial long description associated with the bug report
+    cursor.execute( "INSERT INTO longdescs VALUES (%s,%s,%s,%s)",
+                    [ current['number'],
+                      reporter,
+                      time.strftime("%Y-%m-%d %H:%M:%S", current['date-reported'][:9]),
+                      current['description'] ] )
+
+    # Add whatever notes are associated with this defect
+    for n in current['notes']:
+        cursor.execute( "INSERT INTO longdescs VALUES (%s,%s,%s,%s)",
+                        [current['number'],
+                         reporter,
+                         time.strftime("%Y-%m-%d %H:%M:%S", n['timestamp'][:9]),
+                         n['text']])
+
+    # add attachments associated with this defect
+    for a in current['attachments']:
+        cursor.execute( "INSERT INTO attachments SET " \
+                        "bug_id=%s, creation_ts=%s, description='', mimetype=%s," \
+                        "filename=%s, thedata=%s, submitter_id=%s",
+                        [ current['number'],
+                          time.strftime("%Y-%m-%d %H:%M:%S", current['date-reported'][:9]),
+                          a[1], a[0], a[2], reporter ])
+
+    cursor.close()
+    db.close()
+
+def usage():
+    print """Usage: jb2bz.py [OPTIONS] Product
+
+Where OPTIONS are one or more of the following:
+
+  -h                This help information.
+  -s STATUS         One of UNCONFIRMED, NEW, ASSIGNED, REOPENED, RESOLVED, VERIFIED, CLOSED
+                    (default is NEW)
+  -c COMPONENT      The component to attach to each bug as it is important. This should be
+                    valid component for the Product.
+  -v VERSION        Version to assign to these defects.
+
+Product is the Product to assign these defects to.
+
+All of the JitterBugs in the current directory are imported, including replies, notes,
+attachments, and similar noise.
+"""
+    sys.exit(1)
+
+
+def main():
+    global bug_status, component, version, product
+    opts, args = getopt.getopt(sys.argv[1:], "hs:c:v:")
+
+    for o,a in opts:
+        if o == "-s":
+            if a in ('UNCONFIRMED','NEW','ASSIGNED','REOPENED','RESOLVED','VERIFIED','CLOSED'):
+                bug_status = a
+        elif o == '-c':
+            component = a
+        elif o == '-v':
+            version = a
+        elif o == '-h':
+            usage()
+
+    if len(args) != 1:
+        sys.stderr.write("Must specify the Product.\n")
+        sys.exit(1)
+
+    product = args[0]
+
+    for bug in filter(lambda x: re.match(r"\d+$", x), glob.glob("*")):
+        process_jitterbug(bug)
+        
+
+if __name__ == "__main__":
+    main()

mozilla/webtools/bugzilla/contrib/mysqld-watcher.pl

@@ -0,0 +1,102 @@
+#!/usr/bonsaitools/bin/perl -w
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+# 
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+# 
+# The Original Code is the Bugzilla Bug Tracking System.
+# 
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 2000 Netscape Communications Corporation.  All
+# Rights Reserved.
+# 
+# Contributor(s): Dan Mosedale <dmose@mozilla.org>
+#
+
+# mysqld-watcher.pl - a script that watches the running instance of
+# mysqld and kills off any long-running SELECTs against the shadow_db
+# 
+use diagnostics;
+use strict;
+
+require "globals.pl";
+
+# some configurables: 
+
+# length of time before a thread is eligible to be killed, in seconds
+#
+my $long_query_time = 600;
+#
+# the From header for any messages sent out
+#
+my $mail_from = "root\@lounge.mozilla.org";
+#
+# mail transfer agent.  this should probably really be converted to a Param().
+#
+my $mta_program = "/usr/lib/sendmail -t -ODeliveryMode=deferred";
+
+# and STDIN is where we get the info about running threads
+#
+close(STDIN);
+open(STDIN, "/usr/bonsaitools/bin/mysqladmin processlist |");
+
+# iterate through the running threads
+#
+my @LONGEST = (0,0,0,0,0,0,0,0,0);
+while ( <STDIN> ) { 
+    my @F = split(/\|/);
+
+    # if this line is not the correct number of fields, or if the thread-id
+    # field contains Id, skip this line.  both these cases indicate that this
+    # line contains pretty-printing gunk and not thread info.
+    #
+    next if ( $#F != 9 || $F[1] =~ /Id/); 
+
+    if ( $F[4] =~ /shadow_bugs/             # shadowbugs database in use
+         && $F[5] =~ /Query/                # this is actually a query
+         && $F[6] > $long_query_time        # this query has taken too long
+         && $F[8] =~ /(select|SELECT)/      # only kill a select
+         && $F[6] > $LONGEST[6] ) {         # the longest running query seen
+        @LONGEST = @F;
+    }
+}
+
+# send an email message
+#
+# should perhaps be moved to somewhere more global for use in bugzilla as a 
+# whole; should also do more error-checking
+#
+sub sendEmail($$$$) {
+    ($#_ == 3) || die("sendEmail: invalid number of arguments");
+    my ($from, $to, $subject, $body) = @_;
+
+    open(MTA, "|$mta_program");
+    print MTA "From: $from\n";
+    print MTA "To: $to\n";
+    print MTA "Subject: $subject\n";
+    print MTA "\n";
+    print MTA $body;
+    print MTA "\n";
+    close(MTA);
+   
+}
+
+# if we found anything, kill the database thread and send mail about it
+#
+if ($LONGEST[6] != 0) {
+
+    system ("/usr/bonsaitools/bin/mysqladmin", "kill", $LONGEST[1]);
+
+    # fire off an email telling the maintainer that we had to kill a thread
+    #
+    sendEmail($mail_from, Param("maintainer"), 
+	     "long running MySQL thread killed",
+	     join(" ", @LONGEST) . "\n");
+}

mozilla/webtools/bugzilla/contrib/yp_nomail.sh

@@ -0,0 +1,78 @@
+#!/bin/sh
+# -*- Mode: ksh -*-
+##############################################################################
+# $Id: yp_nomail.sh,v 1.1 2000-09-12 23:50:31 cyeh%bluemartini.com Exp $
+# yp_nomail
+#
+# Our mail admins got annoyed when bugzilla kept sending email
+# to people who'd had bugzilla entries and left the company.  They
+# were no longer in the list of valid email users so it'd bounce.
+# Maintaining the 'data/nomail' file was a pain.  Luckily, our UNIX
+# admins list all the users that ever were, but the people who've left
+# have a distinct marker in their password file. For example:
+#
+# fired:*LK*:2053:1010:You're Fired Dude:/home/loser:/bin/false
+#
+# This script takes advantage of the "*LK*" convention seen via 
+# ypcat passwd and dumps those people into the nomail file. Any
+# manual additions are kept in a "nomail.(domainname)" file and 
+# appended to the list of yp lockouts every night via Cron
+#
+# 58 23 * * * /export/bugzilla/contrib/yp_nomail.sh > /dev/null 2>&1
+#
+# Tak ( Mark Takacs ) 08/2000
+#
+# XXX: Maybe should crosscheck w/bugzilla users?
+##############################################################################
+
+####
+# Configure this section to suite yer installation
+####
+
+DOMAIN=`domainname`
+MOZILLA_HOME="/export/mozilla"
+BUGZILLA_HOME="${MOZILLA_HOME}/bugzilla"
+NOMAIL_DIR="${BUGZILLA_HOME}/data"
+NOMAIL="${NOMAIL_DIR}/nomail"
+NOMAIL_ETIME="${NOMAIL}.${DOMAIN}"
+NOMAIL_YP="${NOMAIL}.yp"
+FIRED_FLAG="\*LK\*"
+
+YPCAT="/usr/bin/ypcat"
+GREP="/usr/bin/grep"
+SORT="/usr/bin/sort"
+
+########################## no more config needed  #################
+
+# This dir comes w/Bugzilla. WAY too paranoid
+if [ ! -d ${NOMAIL_DIR} ] ; then
+    echo "Creating $date_dir"
+    mkdir -p ${NOMAIL_DIR}
+fi
+
+#
+# Do some (more) paranoid checking
+#
+touch ${NOMAIL}
+if [ ! -w ${NOMAIL} ] ; then
+    echo "Can't write nomail file: ${NOMAIL} -- exiting"
+    exit
+fi
+if [ ! -r ${NOMAIL_ETIME} ] ; then
+    echo "Can't access custom nomail file: ${NOMAIL_ETIME} -- skipping"
+    NOMAIL_ETIME=""
+fi
+
+#
+# add all the people with '*LK*' password to the nomail list
+# XXX: maybe I should customize the *LK* string. Doh.
+#
+
+LOCKOUT=`$YPCAT passwd | $GREP "${FIRED_FLAG}" | cut -d: -f1 | sort > ${NOMAIL_YP}`
+`cat ${NOMAIL_YP} ${NOMAIL_ETIME} > ${NOMAIL}`
+
+exit
+
+
+# end
+

mozilla/webtools/bugzilla/createaccount.cgi

@@ -0,0 +1,88 @@
+#!/usr/bonsaitools/bin/perl -wT
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Terry Weissman <terry@mozilla.org>
+#                 David Gardiner <david.gardiner@unisa.edu.au>
+#                 Joe Robins <jmrobins@tgix.com>
+#                 Christopher Aillon <christopher@aillon.com>
+#                 Gervase Markham <gerv@gerv.net>
+
+use diagnostics;
+use strict;
+
+use lib qw(.);
+
+require "CGI.pl";
+require "globals.pl";
+
+# Shut up misguided -w warnings about "used only once":
+use vars qw(
+  %FORM
+  $template
+  $vars
+);
+
+ConnectToDatabase();
+
+# If we're using LDAP for login, then we can't create a new account here.
+if(Param('useLDAP')) {
+  DisplayError("This site is using LDAP for authentication.  Please contact 
+                an LDAP administrator to get a new account created.",
+               "Can't create LDAP accounts");
+  PutFooter();
+  exit;
+}
+
+# Clear out the login cookies.  Make people log in again if they create an
+# account; otherwise, they'll probably get confused.
+my $cookiepath = Param("cookiepath");
+print "Set-Cookie: Bugzilla_login= ; path=$cookiepath; expires=Sun, 30-Jun-80 00:00:00 GMT
+Set-Cookie: Bugzilla_logincookie= ; path=$cookiepath; expires=Sun, 30-Jun-80 00:00:00 GMT\n";
+
+print "Content-Type: text/html\n\n";
+
+my $login = $::FORM{'login'};
+my $realname = trim($::FORM{'realname'});
+
+if (defined($login)) {
+    # We've been asked to create an account.
+    CheckEmailSyntax($login);
+    trick_taint($login);
+    $vars->{'login'} = $login;
+    
+    if (!ValidateNewUser($login)) {
+        # Account already exists        
+        $template->process("account/exists.html.tmpl", $vars)
+          || ThrowTemplateError($template->error());
+        exit;
+    }
+    
+    # Create account
+    my $password = InsertNewUser($login, $realname);
+    MailPassword($login, $password);
+    
+    $template->process("account/created.html.tmpl", $vars)
+      || ThrowTemplateError($template->error());
+    exit;
+}
+
+# Show the standard "would you like to create an account?" form.
+$template->process("account/create.html.tmpl", $vars)
+  || ThrowTemplateError($template->error());

mozilla/webtools/bugzilla/css/buglist.css

@@ -0,0 +1,38 @@
+/* The contents of this file are subject to the Mozilla Public
+  * License Version 1.1 (the "License"); you may not use this file
+  * except in compliance with the License. You may obtain a copy of
+  * the License at http://www.mozilla.org/MPL/
+  *
+  * Software distributed under the License is distributed on an "AS
+  * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+  * implied. See the License for the specific language governing
+  * rights and limitations under the License.
+  *
+  * The Original Code is the Bugzilla Bug Tracking System.
+  *
+  * The Initial Developer of the Original Code is Netscape Communications
+  * Corporation. Portions created by Netscape are
+  * Copyright (C) 1998 Netscape Communications Corporation. All
+  * Rights Reserved.
+  *
+  * Contributor(s): Myk Melez <myk@mozilla.org>
+  */
+
+/* Right align bug IDs. */
+.bz_id_column { text-align: right; }
+
+/* Style bug rows according to severity. */
+.bz_blocker { color: red; font-weight: bold; }
+.bz_critical { color: red; }
+.bz_enhancement { font-style: italic; }
+
+/* Style secure bugs if the installation is not using bug groups.
+ * Installations that *are* using bug groups are likely to be using
+ * them for almost all bugs, in which case special styling is not
+ * informative and generally a nuisance.
+ */
+.bz_secure { color: black; background-color: lightgrey; }
+
+/* Align columns in the "change multiple bugs" form to the right. */
+table#form tr th { text-align: right; }
+

mozilla/webtools/bugzilla/css/panel.css

@@ -0,0 +1,37 @@
+body
+  {
+    font-family:       sans-serif;
+    font-size:        10pt;
+    background-color:  white;
+  }
+
+ul
+  {
+    padding-left: 12px;
+  }
+
+radio
+  {
+    -moz-user-select: ignore;
+  }
+
+.text-link
+  {
+    margin-left:      3px;
+  }
+
+.text-link:hover
+  {
+    text-decoration:  underline;
+    cursor:           pointer;
+  }
+
+.descriptive-content
+  {
+    color:            #AAAAAA;
+  }
+
+.descriptive-content[focused=true]
+  {
+    color:            black;
+  }

mozilla/webtools/bugzilla/defparams.pl

@@ -0,0 +1,601 @@
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Terry Weissman <terry@mozilla.org>
+#                 Dawn Endico <endico@mozilla.org>
+#                 Dan Mosedale <dmose@mozilla.org>
+#                 Joe Robins <jmrobins@tgix.com>
+#                 Jake <jake@acutex.net>
+#
+
+# This file defines all the parameters that we have a GUI to edit within
+# Bugzilla.
+
+# ATTENTION!!!!   THIS FILE ONLY CONTAINS THE DEFAULTS.
+# You cannot change your live settings by editing this file.
+# Only adding new parameters is done here.  Once the parameter exists, you 
+# must use %baseurl%/editparams.cgi from the web to edit the settings.
+
+use diagnostics;
+use strict;
+
+# Shut up misguided -w warnings about "used only once".  For some reason,
+# "use vars" chokes on me when I try it here.
+
+sub defparams_pl_sillyness {
+    my $zz;
+    $zz = %::param_checker;
+    $zz = %::param_desc;
+    $zz = %::param_type;
+}
+
+sub WriteParams {
+    foreach my $i (@::param_list) {
+        if (!defined $::param{$i}) {
+            $::param{$i} = $::param_default{$i};
+            if (!defined $::param{$i}) {
+                die "No default parameter ever specified for $i";
+            }
+        }
+    }
+
+    my $tmpname = "data/params.$$";
+    open(FID, ">$tmpname") || die "Can't create $tmpname";
+    my $v = $::param{'version'};
+    delete $::param{'version'};  # Don't write the version number out to
+                                # the params file.
+    print FID GenerateCode('%::param');
+    $::param{'version'} = $v;
+    print FID "1;\n";
+    close FID;
+    rename $tmpname, "data/params" || die "Can't rename $tmpname to data/params";
+    ChmodDataFile('data/params', 0666);
+}
+    
+
+sub DefParam {
+    my ($id, $desc, $type, $default, $checker) = (@_);
+    push @::param_list, $id;
+    $::param_desc{$id} = $desc;
+    $::param_type{$id} = $type;
+    $::param_default{$id} = $default;
+    if (defined $checker) {
+        $::param_checker{$id} = $checker;
+    }
+}
+
+
+sub check_numeric {
+    my ($value) = (@_);
+    if ($value !~ /^[0-9]+$/) {
+        return "must be a numeric value";
+    }
+    return "";
+}
+    
+sub check_shadowdb {
+    my ($value) = (@_);
+    $value = trim($value);
+    if ($value eq "") {
+        return "";
+    }
+    SendSQL("SHOW DATABASES");
+    while (MoreSQLData()) {
+        my $n = FetchOneColumn();
+        if (lc($n) eq lc($value)) {
+            return "The $n database already exists.  If that's really the name you want to use for the backup, please CAREFULLY make the existing database go away somehow, and then try again.";
+        }
+    }
+    SendSQL("CREATE DATABASE $value");
+    SendSQL("INSERT INTO shadowlog (command) VALUES ('SYNCUP')", 1);
+    return "";
+}
+
+@::param_list = ();
+
+
+
+# OK, here are the definitions themselves.
+#
+# The type of parameters (the third parameter to DefParam) can be one
+# of the following:
+#
+# t -- A short text entry field (suitable for a single line)
+# l -- A long text field (suitable for many lines)
+# b -- A boolean value (either 1 or 0)
+
+DefParam("maintainer",
+         "The email address of the person who maintains this installation of Bugzilla.",
+         "t",
+         'THE MAINTAINER HAS NOT YET BEEN SET');
+
+DefParam("urlbase",
+         "The URL that is the common initial leading part of all Bugzilla URLs.",
+         "t",
+         "http://cvs-mirror.mozilla.org/webtools/bugzilla/",
+         \&check_urlbase);
+
+sub check_urlbase {
+    my ($url) = (@_);
+    if ($url !~ m:^http.*/$:) {
+        return "must be a legal URL, that starts with http and ends with a slash.";
+    }
+    return "";
+}
+
+DefParam("cookiepath", 
+  "Directory path under your document root that holds your Bugzilla installation. Make sure to begin with a /.",
+  "t",
+  "/");
+
+DefParam("usequip",
+        "If this is on, Bugzilla displays a silly quip at the beginning of buglists, and lets users add to the list of quips.",
+        "b",
+        1);
+
+# Added parameter - JMR, 2/16/00
+DefParam("usebuggroups",
+         "If this is on, Bugzilla will associate a bug group with each product in the database, and use it for querying bugs.",
+         "b",
+         0); 
+
+# Added parameter - JMR, 2/16/00
+DefParam("usebuggroupsentry",
+         "If this is on, Bugzilla will use product bug groups to restrict who can enter bugs.  Requires usebuggroups to be on as well.",
+         "b",
+         0); 
+
+DefParam("shadowdb",
+         "If non-empty, then this is the name of another database in which Bugzilla will keep a shadow read-only copy of everything.  This is done so that long slow read-only operations can be used against this db, and not lock up things for everyone else.  Turning on this parameter will create the given database; be careful not to use the name of an existing database with useful data in it!",
+         "t",
+         "",
+         \&check_shadowdb);
+
+DefParam("queryagainstshadowdb",
+         "If this is on, and the shadowdb is set, then queries will happen against the shadow database.",
+         "b",
+         0);
+         
+
+# Adding in four parameters for LDAP authentication.  -JMR, 7/28/00
+DefParam("useLDAP",
+         "Turn this on to use an LDAP directory for user authentication ".
+         "instead of the Bugzilla database.  (User profiles will still be ".
+         "stored in the database, and will match against the LDAP user by ".
+         "email address.)",
+         "b",
+         0);
+
+
+DefParam("LDAPserver",
+         "The name (and optionally port) of your LDAP server. (e.g. ldap.company.com, or ldap.company.com:portnum)",
+         "t",
+         "");
+
+
+DefParam("LDAPBaseDN",
+         "The BaseDN for authenticating users against. (e.g. \"ou=People,o=Company\")",
+         "t",
+         "");
+
+
+DefParam("LDAPmailattribute",
+         "The name of the attribute of a user in your directory that ".
+         "contains the email address.",
+         "t",
+         "mail");
+#End of LDAP parameters
+
+
+DefParam("mostfreqthreshold",
+         "The minimum number of duplicates a bug needs to show up on the <A HREF=\"duplicates.cgi\">most frequently reported bugs page</a>. If you have a large database and this page takes a long time to load, try increasing this number.",
+         "t",
+         "2");
+
+
+DefParam("mybugstemplate",
+         "This is the URL to use to bring up a simple 'all of my bugs' list for a user.  %userid% will get replaced with the login name of a user.",
+         "t",
+         "buglist.cgi?bug_status=NEW&amp;bug_status=ASSIGNED&amp;bug_status=REOPENED&amp;email1=%userid%&amp;emailtype1=exact&amp;emailassigned_to1=1&amp;emailreporter1=1");
+    
+
+DefParam("shutdownhtml",
+         "If this field is non-empty, then Bugzilla will be completely disabled and this text will be displayed instead of all the Bugzilla pages.",
+         "l",
+         "");
+
+DefParam("sendmailnow",
+         "If this is on, Bugzilla will tell sendmail to send any e-mail immediately. If you have a large number of users with a large amount of e-mail traffic, enabling this option may dramatically slow down Bugzilla. Best used for smaller installations of Bugzilla.",
+         "b",
+         0);
+
+DefParam("passwordmail",
+q{The email that gets sent to people to tell them their password.  Within
+this text, %mailaddress% gets replaced by the person's email address,
+%login% gets replaced by the person's login (usually the same thing), and
+%password% gets replaced by their password.  %<i>anythingelse</i>% gets
+replaced by the definition of that parameter (as defined on this page).},
+         "l",
+         q{From: bugzilla-daemon
+To: %mailaddress%
+Subject: Your Bugzilla password.
+
+To use the wonders of Bugzilla, you can use the following:
+
+ E-mail address: %login%
+       Password: %password%
+
+ To change your password, go to:
+ %urlbase%userprefs.cgi
+});
+
+
+DefParam("newchangedmail",
+q{The email that gets sent to people when a bug changes.  Within this
+text, %to% gets replaced with the e-mail address of the person recieving
+the mail.  %bugid% gets replaced by the bug number.  %diffs% gets
+replaced with what's changed.  %neworchanged% is "New:" if this mail is
+reporting a new bug or empty if changes were made to an existing one.
+%summary% gets replaced by the summary of this bug. %reasonsheader% 
+is replaced by an abbreviated list of reasons why the user is getting the email,
+suitable for use in an email header (such as X-Bugzilla-Reason).
+%reasonsbody% is replaced by text that explains why the user is getting the email 
+in more user friendly text than %reasonsheader%.
+%<i>anythingelse</i>% gets replaced by the definition of 
+that parameter (as defined on this
+page).},
+         "l",
+"From: bugzilla-daemon
+To: %to%
+Subject: [Bug %bugid%] %neworchanged%%summary%
+X-Bugzilla-Reason: %reasonsheader%
+
+%urlbase%show_bug.cgi?id=%bugid%
+
+%diffs%
+
+
+
+%reasonsbody%");
+
+
+
+DefParam("whinedays",
+         "The number of days that we'll let a bug sit untouched in a NEW state before our cronjob will whine at the owner.",
+         "t",
+         7,
+         \&check_numeric);
+
+
+DefParam("whinemail",
+         "The email that gets sent to anyone who has a NEW bug that hasn't been touched for more than <b>whinedays</b>.  Within this text, %email% gets replaced by the offender's email address.  %userid% gets replaced by the offender's bugzilla login (which, in most installations, is the same as the email address.)  %<i>anythingelse</i>% gets replaced by the definition of that parameter (as defined on this page).<p> It is a good idea to make sure this message has a valid From: address, so that if the mail bounces, a real person can know that there are bugs assigned to an invalid address.",
+         "l",
+         q{From: %maintainer%
+To: %email%
+Subject: Your Bugzilla buglist needs attention.
+
+[This e-mail has been automatically generated.]
+
+You have one or more bugs assigned to you in the Bugzilla 
+bugsystem (%urlbase%) that require
+attention.
+
+All of these bugs are in the NEW state, and have not been touched
+in %whinedays% days or more.  You need to take a look at them, and 
+decide on an initial action.
+
+Generally, this means one of three things:
+
+(1) You decide this bug is really quick to deal with (like, it's INVALID),
+    and so you get rid of it immediately.
+(2) You decide the bug doesn't belong to you, and you reassign it to someone
+    else.  (Hint: if you don't know who to reassign it to, make sure that
+    the Component field seems reasonable, and then use the "Reassign bug to
+    owner of selected component" option.)
+(3) You decide the bug belongs to you, but you can't solve it this moment.
+    Just use the "Accept bug" command.
+
+To get a list of all NEW bugs, you can use this URL (bookmark it if you like!):
+
+    %urlbase%buglist.cgi?bug_status=NEW&assigned_to=%userid%
+
+Or, you can use the general query page, at
+%urlbase%query.cgi.
+
+Appended below are the individual URLs to get to all of your NEW bugs that 
+haven't been touched for a week or more.
+
+You will get this message once a day until you've dealt with these bugs!
+
+});
+
+
+
+DefParam("defaultquery",
+          "This is the default query that initially comes up when you submit a bug.  It's in URL parameter format, which makes it hard to read.  Sorry!",
+         "t",
+         "bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&emailassigned_to1=1&emailassigned_to2=1&emailreporter2=1&emailcc2=1&emailqa_contact2=1&order=%22Importance%22");
+
+
+DefParam("letsubmitterchoosepriority",
+         "If this is on, then people submitting bugs can choose an initial priority for that bug.  If off, then all bugs initially have the default priority selected below.",
+         "b",
+         1);
+
+
+sub check_priority {
+    my ($value) = (@_);
+    GetVersionTable();
+    if (lsearch(\@::legal_priority, $value) < 0) {
+        return "Must be a legal priority value: one of " .
+            join(", ", @::legal_priority);
+    }
+    return "";
+}
+
+DefParam("defaultpriority",
+         "This is the priority that newly entered bugs are set to.",
+         "t",
+         "P2",
+         \&check_priority);
+
+
+DefParam("usetargetmilestone",
+         "Do you wish to use the Target Milestone field?",
+         "b",
+         0);
+
+DefParam("nummilestones",
+         "If using Target Milestone, how many milestones do you wish to
+          appear?",
+         "t",
+         10,
+         \&check_numeric);
+
+DefParam("curmilestone",
+         "If using Target Milestone, Which milestone are we working toward right now?",
+         "t",
+         1,
+         \&check_numeric);
+
+DefParam("musthavemilestoneonaccept",
+         "If you are using Target Milestone, do you want to require that the milestone be set in order for a user to ACCEPT a bug?",
+         "b",
+         0);
+
+DefParam("useqacontact",
+         "Do you wish to use the QA Contact field?",
+         "b",
+         0);
+
+DefParam("usestatuswhiteboard",
+         "Do you wish to use the Status Whiteboard field?",
+         "b",
+         0);
+
+DefParam("usebrowserinfo",
+         "Do you want bug reports to be assigned an OS & Platform based on the browser
+          the user makes the report from?",
+         "b",
+         1);
+
+DefParam("usedependencies",
+         "Do you wish to use dependencies (allowing you to mark which bugs depend on which other ones)?",
+         "b",
+         1);
+
+DefParam("webdotbase",
+         "It is possible to show graphs of dependent bugs. You may set this parameter to
+any of the following:
+<ul>
+<li>A complete file path to \'dot\' (part of <a
+href=\"http://www.graphviz.org\">GraphViz</a>) will generate the graphs
+locally.</li>
+<li>A URL prefix pointing to an installation of the <a
+href=\"http://www.research.att.com/~north/cgi-bin/webdot.cgi\">webdot
+package</a> will generate the graphs remotely.</li>
+<li>A blank value will disable dependency graphing.</li>
+</ul>
+The default value is a publically-accessible webdot server.",
+         "t",
+         "http://www.research.att.com/~north/cgi-bin/webdot.cgi/%urlbase%",
+         \&check_webdotbase);
+
+sub check_webdotbase {
+    my ($value) = (@_);
+    $value = trim($value);
+    if ($value eq "") {
+        return "";
+    }
+    if($value !~ /^https?:/) {
+        if(! -x $value) {
+            return "The file path \"$value\" is not a valid executable.  Please specify the complete file path to 'dot' if you intend to generate graphs locally.";
+        }
+        # Check .htaccess allows access to generated images
+        if(-e "data/webdot/.htaccess") {
+            open HTACCESS, "data/webdot/.htaccess";
+            if(! grep(/png/,<HTACCESS>)) {
+                print "Dependency graph images are not accessible.\nDelete data/webdot/.htaccess and re-run checksetup.pl to rectify.\n";
+            }
+            close HTACCESS;
+        }
+    }
+    return "";
+}
+
+DefParam("expectbigqueries",
+         "If this is on, then we will tell mysql to <tt>set option SQL_BIG_TABLES=1</tt> before doing queries on bugs.  This will be a little slower, but one will not get the error <tt>The table ### is full</tt> for big queries that require a big temporary table.",
+         "b",
+         0);
+
+DefParam("emailregexp",
+         'This defines the regexp to use for legal email addresses.  The default tries to match fully qualified email addresses.  Another popular value to put here is <tt>^[^@]+$</tt>, which means "local usernames, no @ allowed."',
+         "t",
+         q:^[^@]+@[^@]+\\.[^@]+$:);
+
+DefParam("emailregexpdesc",
+         "This describes in english words what kinds of legal addresses are allowed by the <tt>emailregexp</tt> param.",
+         "l",
+         "A legal address must contain exactly one '\@', and at least one '.' after the \@.");
+
+DefParam("emailsuffix",
+         "This is a string to append to any email addresses when actually sending mail to that address.  It is useful if you have changed the <tt>emailregexp</tt> param to only allow local usernames, but you want the mail to be delivered to username\@my.local.hostname.",
+         "t",
+         "");
+
+
+DefParam("voteremovedmail",
+q{This is a mail message to send to anyone who gets a vote removed from a bug for any reason.  %to% gets replaced by the person who used to be voting for this bug.  %bugid% gets replaced by the bug number.  %reason% gets replaced by a short reason describing why the vote(s) were removed.  %votesremoved%, %votesold% and %votesnew% is the number of votes removed, before and after respectively.  %votesremovedtext%, %votesoldtext% and %votesnewtext% are these as sentences, eg "You had 2 votes on this bug."  %count% is also supported for backwards compatibility.  %<i>anythingelse</i>% gets replaced by the definition of that parameter (as defined on this page).},
+         "l",
+"From: bugzilla-daemon
+To: %to%
+Subject: [Bug %bugid%] Some or all of your votes have been removed.
+
+Some or all of your votes have been removed from bug %bugid%.
+
+%votesoldtext%
+
+%votesnewtext%
+
+Reason: %reason%
+
+%urlbase%show_bug.cgi?id=%bugid%
+");
+         
+DefParam("allowbugdeletion",
+         q{The pages to edit products and components and versions can delete all associated bugs when you delete a product (or component or version).  Since that is a pretty scary idea, you have to turn on this option before any such deletions will ever happen.},
+         "b",
+         0);
+
+
+DefParam("allowemailchange",
+         q{Users can change their own email address through the preferences.  Note that the change is validated by emailing both addresses, so switching this option on will not let users use an invalid address.},
+         "b",
+         0);
+
+
+DefParam("allowuserdeletion",
+         q{The pages to edit users can also let you delete a user.  But there is no code that goes and cleans up any references to that user in other tables, so such deletions are kinda scary.  So, you have to turn on this option before any such deletions will ever happen.},
+         "b",
+         0);
+
+DefParam("browserbugmessage",
+         "If bugzilla gets unexpected data from the browser, in addition to displaying the cause of the problem, it will output this HTML as well.",
+         "l",
+         "this may indicate a bug in your browser.\n");
+
+#
+# Parameters to force users to comment their changes for different actions.
+DefParam("commentonaccept", 
+         "If this option is on, the user needs to enter a short comment if he accepts the bug",
+         "b", 0 );
+DefParam("commentonclearresolution", 
+         "If this option is on, the user needs to enter a short comment if the bugs resolution is cleared",
+         "b", 0 );
+DefParam("commentonconfirm", 
+         "If this option is on, the user needs to enter a short comment when confirming a bug",
+         "b", 0 );
+DefParam("commentonresolve", 
+         "If this option is on, the user needs to enter a short comment if the bug is resolved",
+         "b", 0 );
+DefParam("commentonreassign", 
+         "If this option is on, the user needs to enter a short comment if the bug is reassigned",
+         "b", 0 );
+DefParam("commentonreassignbycomponent", 
+         "If this option is on, the user needs to enter a short comment if the bug is reassigned by component",
+         "b", 0 );
+DefParam("commentonreopen", 
+         "If this option is on, the user needs to enter a short comment if the bug is reopened",
+         "b", 0 );
+DefParam("commentonverify", 
+         "If this option is on, the user needs to enter a short comment if the bug is verified",
+         "b", 0 );
+DefParam("commentonclose", 
+         "If this option is on, the user needs to enter a short comment if the bug is closed",
+         "b", 0 );
+DefParam("commentonduplicate",
+         "If this option is on, the user needs to enter a short comment if the bug is marked as duplicate",
+         "b", 0 );
+DefParam("supportwatchers",
+         "Support one user watching (ie getting copies of all related email" .
+         " about) another's bugs.  Useful for people going on vacation, and" .
+         " QA folks watching particular developers' bugs",
+         "b", 0 );
+
+
+DefParam("move-enabled",
+         "If this is on, Bugzilla will allow certain people to move bugs to the defined database.",
+         "b",
+         0);
+DefParam("move-button-text",
+         "The text written on the Move button. Explain where the bug is being moved to.",
+         "t",
+         'Move To Bugscape');
+DefParam("move-to-url",
+         "The URL of the database we allow some of our bugs to be moved to.",
+         "t",
+         '');
+DefParam("move-to-address",
+         "To move bugs, an email is sent to the target database. This is the email address that database
+          uses to listen for incoming bugs.",
+         "t",
+         'bugzilla-import');
+DefParam("moved-from-address",
+         "To move bugs, an email is sent to the target database. This is the email address from which
+          this mail, and error messages are sent.",
+         "t",
+         'bugzilla-admin');
+DefParam("movers",
+         "A list of people with permission to move bugs and reopen moved bugs (in case the move operation fails).",
+         "t",
+         '');
+DefParam("moved-default-product",
+         "Bugs moved from other databases to here are assigned to this product.",
+         "t",
+         '');
+DefParam("moved-default-component",
+         "Bugs moved from other databases to here are assigned to this component.",
+         "t",
+         '');
+
+# The maximum size (in bytes) for patches and non-patch attachments.
+# The default limit is 1000KB, which is 24KB less than mysql's default
+# maximum packet size (which determines how much data can be sent in a
+# single mysql packet and thus how much data can be inserted into the
+# database) to provide breathing space for the data in other fields of
+# the attachment record as well as any mysql packet overhead (I don't
+# know of any, but I suspect there may be some.)
+
+DefParam("maxpatchsize",
+         "The maximum size (in kilobytes) of patches.  Bugzilla will not 
+          accept patches greater than this number of kilobytes in size.
+          To accept patches of any size (subject to the limitations of 
+          your server software), set this value to zero." ,
+         "t",
+         '1000');
+
+DefParam("maxattachmentsize" , 
+         "The maximum size (in kilobytes) of non-patch attachments.  Bugzilla 
+          will not accept attachments greater than this number of kilobytes 
+          in size.  To accept attachments of any size (subject to the
+          limitations of your server software), set this value to zero." , 
+         "t" , 
+         '1000');
+
+1;

mozilla/webtools/bugzilla/describecomponents.cgi

@@ -0,0 +1,128 @@
+#!/usr/bonsaitools/bin/perl -wT
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Netscape Communications
+# Corporation. Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Terry Weissman <terry@mozilla.org>
+#                 Bradley Baetz <bbaetz@student.usyd.edu.au>
+
+use vars qw(
+  %FORM
+  $userid
+);
+
+use diagnostics;
+use strict;
+
+use lib qw(.);
+
+require "CGI.pl";
+
+ConnectToDatabase();
+GetVersionTable();
+
+if (!defined $::FORM{'product'}) {
+    # Reference to a subset of %::proddesc, which the user is allowed to see
+    my %products;
+
+    if (Param("usebuggroups")) {
+        # OK, now only add products the user can see
+        confirm_login();
+        foreach my $p (@::legal_product) {
+            if (!GroupExists($p) || UserInGroup($p)) {
+                $products{$p} = $::proddesc{$p};
+            }
+        }
+    }
+    else {
+          %products = %::proddesc;
+    }
+
+    my $prodsize = scalar(keys %products);
+    if ($prodsize == 0) {
+        DisplayError("Either no products have been defined ".
+                     "or you have not been given access to any.\n");
+        exit;
+    }
+    elsif ($prodsize > 1) {
+        $::vars->{'proddesc'} = \%products;
+        $::vars->{'target'} = "describecomponents.cgi";
+        $::vars->{'title'} = "Bugzilla component description";
+        $::vars->{'h2'} = 
+          "Please specify the product whose components you want described.";
+
+        print "Content-type: text/html\n\n";
+        $::template->process("global/choose-product.html.tmpl", $::vars)
+          || ThrowTemplateError($::template->error());
+        exit;
+    }
+
+    $::FORM{'product'} = (keys %::proddesc)[0];
+}
+
+my $product = $::FORM{'product'};
+
+# Make sure the user specified a valid product name.  Note that
+# if the user specifies a valid product name but is not authorized
+# to access that product, they will receive a different error message
+# which could enable people guessing product names to determine
+# whether or not certain products exist in Bugzilla, even if they
+# cannot get any other information about that product.
+grep($product eq $_ , @::legal_product)
+  || DisplayError("The product name is invalid.")
+  && exit;
+
+# Make sure the user is authorized to access this product.
+if (Param("usebuggroups") && GroupExists($product) && !$::userid) {
+    confirm_login();
+    UserInGroup($product)
+      || DisplayError("You are not authorized to access that product.")
+        && exit;
+}
+
+######################################################################
+# End Data/Security Validation
+######################################################################
+
+my @components;
+SendSQL("SELECT value, initialowner, initialqacontact, description FROM " .
+        "components WHERE program = " . SqlQuote($product) . " ORDER BY " .
+        "value");
+while (MoreSQLData()) {
+    my ($name, $initialowner, $initialqacontact, $description) =
+      FetchSQLData();
+
+    my %component;
+
+    $component{'name'} = $name;
+    $component{'initialowner'} = $initialowner ?
+      DBID_to_name($initialowner) : '';
+    $component{'initialqacontact'} = $initialqacontact ?
+      DBID_to_name($initialqacontact) : '';
+    $component{'description'} = $description;
+
+    push @components, \%component;
+}
+
+$::vars->{'product'} = $product;
+$::vars->{'components'} = \@components;
+
+print "Content-type: text/html\n\n";
+$::template->process("reports/components.html.tmpl", $::vars)
+  || ThrowTemplateError($::template->error());
+

mozilla/webtools/bugzilla/describekeywords.cgi

@@ -0,0 +1,58 @@
+#!/usr/bonsaitools/bin/perl -wT
+# -*- Mode: perl; indent-tabs-mode: nil -*-
+#
+# The contents of this file are subject to the Mozilla Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is the Bugzilla Bug Tracking System.
+#
+# The Initial Developer of the Original Code is Terry Weissman.
+# Portions created by Terry Weissman are
+# Copyright (C) 2000 Terry Weissman. All
+# Rights Reserved.
+#
+# Contributor(s): Terry Weissman <terry@mozilla.org>
+# Contributor(s): Gervase Markham <gerv@gerv.net>
+
+use diagnostics;
+use strict;
+use lib ".";
+
+require "CGI.pl";
+
+# Use the global template variables. 
+use vars qw($vars $template);
+
+ConnectToDatabase();
+
+quietly_check_login();
+
+SendSQL("SELECT keyworddefs.name, keyworddefs.description, 
+                COUNT(keywords.bug_id)
+         FROM keyworddefs LEFT JOIN keywords ON keyworddefs.id=keywords.keywordid
+         GROUP BY keyworddefs.id, keyworddefs.name, keyworddefs.description, keywords.bug_id
+         ORDER BY keyworddefs.name");
+
+my @keywords;
+
+while (MoreSQLData()) {
+    my ($name, $description, $bugs) = FetchSQLData();
+   
+    push (@keywords, { name => $name, 
+                       description => $description,
+                       bugcount => $bugs });
+}
+   
+$vars->{'keywords'} = \@keywords;
+$vars->{'caneditkeywords'} = UserInGroup("editkeywords");
+
+print "Content-type: text/html\n\n";
+$template->process("reports/keywords.html.tmpl", $vars)
+  || ThrowTemplateError($template->error());

mozilla/webtools/bugzilla/docs/README.docs

@@ -0,0 +1,149 @@
+Welcome to the Bugzilla documentation project!
+You'll find these directories and files here:
+
+README.docs	# This README file
+html/		# The compiled HTML docs from SGML sources (do not edit)
+sgml/		# The original SGML doc sources (edit these)
+txt/		# The compiled text docs from SGML sources
+ps/		# The compiled PostScript docs from SGML sources
+pdf/		# The compiled Adobe PDF docs from SGML sources
+
+A note about SGML:
+  The documentation is written in DocBook 3.1/4.1 SGML, and attempts to adhere
+to the LinuxDoc standards everywhere applicable (http://www.linuxdoc.org).
+Please consult "The LDP Author Guide" at linuxdoc.org for details on how
+to set up your personal environment for compiling SGML files.
+  If you need to make corrections to typographical errors, or other minor
+editing duties, feel free to use any text editor to make the changes.  SGML
+is not rocket science -- simply make sure your text appears between 
+appropriate tags (like <para>This is a paragraph</para>) and we'll be fine.
+If you are making more extensive changes, please ensure you at least validate
+your SGML before checking it in with something like:
+	nsgmls -s Bugzilla-Guide.sgml
+
+  When you validate, please validate the master document (Bugzilla-Guide.sgml)
+as well as the document you edited to ensure there are no critical errors.
+The following errors are considered "normal" when validating with nsgmls:
+
+ DTDDECL catalog entries are not supported
+ "DOCTYPE" declaration not allowed in instance
+
+  The reason these occur is that free sgml validators do not yet support
+the DTDDECL catalog entries, and I've included DOCTYPE declarations in
+entities referenced from Bugzilla-Guide.sgml so these entities can compile
+individually, if necessary.  I suppose I ought to comment them out at some
+point, but for now they are convenient and don't hurt anything.
+
+  Thanks for taking the time to read these notes and consulting the
+documentation.  Please address comments and questions to the newsgroup:
+news://news.mozilla.org/netscape/public/mozilla/webtools .
+
+==========
+HOW TO SET UP YOUR OWN SGML EDITING ENVIRONMENT:
+==========
+
+Trying to set up an SGML/XML Docbook editing environment the 
+first time can be a daunting task.
+I use Linux-Mandrake, in part, because it has a fully-functional
+SGML/XML Docbook editing environment included as part of the
+distribution CD's.  If you have easier instructions for how to
+do this for a particular Linux distribution or platform, please
+let the team know at the mailing list: mozilla-webtools@mozilla.org.
+
+The following text is taken nearly verbatim from
+http://bugzilla.mozilla.org/show_bug.cgi?id=95970, where I gave
+these instructions to someone who wanted the greater manageability
+maintaining a document in Docbook brings:
+
+This is just off the top of my head, but here goes.  Note some of these may 
+NOT be necessary, but I don't think they hurt anything by being installed.
+
+rpms:
+
+openjade
+jadetex
+docbook-dtds
+docbook-style-dsssl
+docbook-style-dsssl-doc
+docbook-utils
+xemacs
+psgml
+sgml-tools
+sgml-common
+
+
+If you're getting these from RedHat, make sure you get the ones in the
+rawhide area.  The ones in the 7.2 distribution are too old and don't
+include the XML stuff.
+
+Download "ldp.dsl" from the Resources page on linuxdoc.org.  This is the 
+stylesheet I use to get the HTML and text output.  It works well, and has a 
+nice, consistent look with the rest of the linuxdoc documents.  You'll have to 
+adjust the paths in ldp.dsl at the top of the file to reflect the actual 
+locations of your docbook catalog files.  I created a directory, 
+/usr/share/sgml/docbook/ldp, and put the ldp.dsl file there.  I then edited 
+ldp.dsl and changed two lines near the top:
+<!ENTITY docbook.dsl SYSTEM "../dsssl-stylesheets/html/docbook.dsl" CDATA 
+dsssl>
+...and...
+<!ENTITY docbook.dsl SYSTEM "../dsssl-stylesheets/print/docbook.dsl" CDATA
+dsssl>
+
+Note the difference is the top one points to the HTML docbook stylesheet, 
+and the next one points to the PRINT docbook stylesheet.
+
+  You know, this sure looks awful involved.  Anyway, once you have this in
+place, add to your .bashrc:
+export SGML_CATALOG_FILES=/etc/sgml/catalog
+export LDP_HOME=/usr/share/sgml/docbook/ldp
+export JADE_PUB=/usr/share/doc/openjade-1.3.1/pubtext
+
+or in .tcshrc:
+setenv SGML_CATALOG_FILES /etc/sgml/catalog
+setenv LDP_HOME /usr/share/sgml/docbook/ldp
+setenv JADE_PUB /usr/share/doc/openjade-1.3.1/pubtext
+
+  If you have root access and want to set this up for anyone on your box,
+you can add those lines to /etc/profile for bash users and /etc/csh.login
+for tcsh users.
+
+  Make sure you edit the paths in the above environment variables if those
+folders are anywhere else on your system (for example, the openjade version
+might change if you get a new version at some point).
+
+  I suggest xemacs for editing your SGML/XML Docbook documents.  The darn
+thing just works, and generally includes PSGML mode by default.  Not to
+mention you can validate the SGML from right within it without having to
+remember the command-line syntax for nsgml (not that it's that hard
+anyway).  If not, you can download psgml at
+http://www.sourceforge.net/projects/psgml.
+
+==========
+NOTES:
+==========
+
+  Here are the commands I use to maintain this documentation.
+  You MUST have DocBook 4.1.2 set up correctly in order for this to work.
+
+To create HTML documentation:
+bash$ cd html
+bash$ jade -t sgml -i html -d $LDP_HOME/ldp.dsl\#html \
+$JADE_PUB/xml.dcl ../sgml/Bugzilla-Guide.sgml
+
+To create HTML documentation as a single big HTML file:
+bash$ cd html
+bash$ jade -V nochunks -t sgml -i html -d $LDP_HOME/ldp.dsl\#html \
+$JADE_PUB/xml.dcl ../sgml/Bugzilla-Guide.sgml >Bugzilla-Guide.html
+
+To create TXT documentation as a single big TXT file:
+bash$ cd txt
+bash$ lynx -dump -nolist ../html/Bugzilla-Guide.html >Bugzilla-Guide.txt
+
+
+Sincerely,
+ Matthew P. Barnson
+ The Bugzilla "Doc Knight"
+ mbarnson@sisna.com
+
+ with major edits by Dave Miller <justdave@syndicomm.com> based on
+ experience setting this up on the Landfill test server.

mozilla/webtools/bugzilla/docs/html/about.html

@@ -0,0 +1,178 @@
+<HTML
+><HEAD
+><TITLE
+>About This Guide</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="PREVIOUS"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="NEXT"
+TITLE="Purpose and Scope of this Guide"
+HREF="aboutthisguide.html"></HEAD
+><BODY
+CLASS="chapter"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="index.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+></TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="aboutthisguide.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="chapter"
+><H1
+><A
+NAME="about">Chapter 1. About This Guide</H1
+><DIV
+CLASS="TOC"
+><DL
+><DT
+><B
+>Table of Contents</B
+></DT
+><DT
+>1.1. <A
+HREF="aboutthisguide.html"
+>Purpose and Scope of this Guide</A
+></DT
+><DT
+>1.2. <A
+HREF="copyright.html"
+>Copyright Information</A
+></DT
+><DT
+>1.3. <A
+HREF="disclaimer.html"
+>Disclaimer</A
+></DT
+><DT
+>1.4. <A
+HREF="newversions.html"
+>New Versions</A
+></DT
+><DT
+>1.5. <A
+HREF="credits.html"
+>Credits</A
+></DT
+><DT
+>1.6. <A
+HREF="translations.html"
+>Translations</A
+></DT
+><DT
+>1.7. <A
+HREF="conventions.html"
+>Document Conventions</A
+></DT
+></DL
+></DIV
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="aboutthisguide.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>The Bugzilla Guide</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+>&nbsp;</TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Purpose and Scope of this Guide</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/aboutthisguide.html

@@ -0,0 +1,184 @@
+<HTML
+><HEAD
+><TITLE
+>Purpose and Scope of this Guide</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="About This Guide"
+HREF="about.html"><LINK
+REL="PREVIOUS"
+TITLE="About This Guide"
+HREF="about.html"><LINK
+REL="NEXT"
+TITLE="Copyright Information"
+HREF="copyright.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="about.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 1. About This Guide</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="copyright.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="aboutthisguide">1.1. Purpose and Scope of this Guide</H1
+><P
+>&#13;      Bugzilla is simply the best piece of bug-tracking software the
+      world has ever seen.  This document is intended to be the
+      comprehensive guide to  the installation, administration,
+      maintenance, and use of the Bugzilla bug-tracking system.
+    </P
+><P
+>&#13;      This release of the Bugzilla Guide is the
+      <EM
+>2.16</EM
+> release. It is so named that it
+      may match the current version of Bugzilla. The numbering
+      tradition stems from that used for many free software projects,
+      in which <EM
+>even-numbered</EM
+> point releases (1.2,
+      1.14, etc.) are considered "stable releases", intended for
+      public consumption; on the other  hand,
+      <EM
+>odd-numbered</EM
+> point releases (1.3, 2.09,
+      etc.) are considered unstable <EM
+>development</EM
+>
+      releases intended for advanced users, systems administrators,
+      developers, and those who enjoy a lot of pain. 
+    </P
+><P
+>&#13;      Newer revisions of the Bugzilla Guide follow the numbering
+      conventions of the main-tree Bugzilla releases, available at
+      <A
+HREF="http://www.bugzilla.org/"
+TARGET="_top"
+>http://www.bugzilla.org/</A
+>.  Intermediate releases will have
+      a minor revision number following a period.  The current version
+      of Bugzilla, as of this writing (April 2nd, 2002) is 2.16; if
+      something were seriously wrong with that edition of the Guide,
+      subsequent releases would receive an additional dotted-decimal
+      digit to indicate the update (2.16.1, 2.16.2, etc.).
+      Got it?  Good.
+    </P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="about.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="copyright.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>About This Guide</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="about.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Copyright Information</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/administration.html

@@ -0,0 +1,233 @@
+<HTML
+><HEAD
+><TITLE
+>Administering Bugzilla</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="PREVIOUS"
+TITLE="Win32 Installation Notes"
+HREF="win32.html"><LINK
+REL="NEXT"
+TITLE="Post-Installation Checklist"
+HREF="postinstall-check.html"></HEAD
+><BODY
+CLASS="chapter"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="win32.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+></TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="postinstall-check.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="chapter"
+><H1
+><A
+NAME="administration">Chapter 4. Administering Bugzilla</H1
+><DIV
+CLASS="TOC"
+><DL
+><DT
+><B
+>Table of Contents</B
+></DT
+><DT
+>4.1. <A
+HREF="postinstall-check.html"
+>Post-Installation Checklist</A
+></DT
+><DT
+>4.2. <A
+HREF="useradmin.html"
+>User Administration</A
+></DT
+><DD
+><DL
+><DT
+>4.2.1. <A
+HREF="useradmin.html#defaultuser"
+>Creating the Default User</A
+></DT
+><DT
+>4.2.2. <A
+HREF="useradmin.html#manageusers"
+>Managing Other Users</A
+></DT
+></DL
+></DD
+><DT
+>4.3. <A
+HREF="programadmin.html"
+>Product, Component, Milestone, and Version
+      Administration</A
+></DT
+><DD
+><DL
+><DT
+>4.3.1. <A
+HREF="programadmin.html#products"
+>Products</A
+></DT
+><DT
+>4.3.2. <A
+HREF="programadmin.html#components"
+>Components</A
+></DT
+><DT
+>4.3.3. <A
+HREF="programadmin.html#versions"
+>Versions</A
+></DT
+><DT
+>4.3.4. <A
+HREF="programadmin.html#milestones"
+>Milestones</A
+></DT
+><DT
+>4.3.5. <A
+HREF="programadmin.html#voting"
+>Voting</A
+></DT
+><DT
+>4.3.6. <A
+HREF="programadmin.html#groups"
+>Groups and Group Security</A
+></DT
+></DL
+></DD
+><DT
+>4.4. <A
+HREF="security.html"
+>Bugzilla Security</A
+></DT
+></DL
+></DIV
+><FONT
+COLOR="RED"
+>&#13;    Or, I just got this cool thing installed.  Now what the heck do I
+    do with it?
+  </FONT
+><P
+>&#13;    So you followed <SPAN
+CLASS="QUOTE"
+>"<A
+HREF="installation.html"
+>Bugzilla Installation</A
+>"</SPAN
+> to the
+    letter, and logged into Bugzilla for the very first time with your
+    super-duper god account.  You sit, contentedly staring at the
+    Bugzilla Query Screen, the worst of the whole mad business of
+    installing this terrific program behind you. It seems, though, you
+    have nothing yet to query! Your first act of business should be to
+    setup the operating parameters for Bugzilla so you can get busy
+    getting data into your bug tracker.
+  </P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="win32.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="postinstall-check.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Win32 Installation Notes</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+>&nbsp;</TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Post-Installation Checklist</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/bonsai.html

@@ -0,0 +1,160 @@
+<HTML
+><HEAD
+><TITLE
+>Bonsai</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="Integrating Bugzilla with Third-Party Tools"
+HREF="integration.html"><LINK
+REL="PREVIOUS"
+TITLE="Integrating Bugzilla with Third-Party Tools"
+HREF="integration.html"><LINK
+REL="NEXT"
+TITLE="CVS"
+HREF="cvs.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="integration.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 5. Integrating Bugzilla with Third-Party Tools</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="cvs.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="bonsai">5.1. Bonsai</H1
+><P
+>Bonsai is a web-based tool for managing <A
+HREF="cvs.html"
+>CVS, the Concurrent Versioning System</A
+>
+      .  Using Bonsai, administrators can control open/closed status
+      of trees, query a fast relational database back-end for change,
+      branch, and comment information, and view changes made since the
+      last time the tree was closed.  These kinds of changes cause the
+      engineer responsible to be <SPAN
+CLASS="QUOTE"
+>"on the hook"</SPAN
+> (include
+      cool URL link here for Hook policies at mozilla.org).  Bonsai
+      also includes gateways to <A
+HREF="tinderbox.html"
+>Tinderbox, the Mozilla automated build management system</A
+> and Bugzilla </P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="integration.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="cvs.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Integrating Bugzilla with Third-Party Tools</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="integration.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>CVS</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/bsdinstall.html

@@ -0,0 +1,149 @@
+<HTML
+><HEAD
+><TITLE
+>BSD Installation Notes</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="Installation"
+HREF="installation.html"><LINK
+REL="PREVIOUS"
+TITLE="Mac OS X Installation Notes"
+HREF="osx.html"><LINK
+REL="NEXT"
+TITLE="Installation General Notes"
+HREF="geninstall.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="osx.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 3. Installation</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="geninstall.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="bsdinstall">3.4. BSD Installation Notes</H1
+><P
+>&#13;      For instructions on how to set up Bugzilla on FreeBSD, NetBSD, OpenBSD, BSDi, etc. please
+      consult <A
+HREF="osx.html"
+>Section 3.3</A
+>.
+    </P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="osx.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="geninstall.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Mac OS X Installation Notes</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="installation.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Installation General Notes</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/bzhacking.html

@@ -0,0 +1,492 @@
+<HTML
+><HEAD
+><TITLE
+>Hacking Bugzilla</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="Useful Patches and Utilities for Bugzilla"
+HREF="patches.html"><LINK
+REL="PREVIOUS"
+TITLE="The Quicksearch Utility"
+HREF="quicksearch.html"><LINK
+REL="NEXT"
+TITLE="GNU Free Documentation License"
+HREF="gfdl.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="quicksearch.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Appendix D. Useful Patches and Utilities for Bugzilla</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="gfdl.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="bzhacking">D.5. Hacking Bugzilla</H1
+><P
+>&#13;      The following is a guide for reviewers when checking code into Bugzilla's
+      CVS repostory at mozilla.org.  If you wish to submit patches to Bugzilla,
+      you should follow the rules and style conventions below.  Any code that
+      does not adhere to these basic rules will not be added to Bugzilla's
+      codebase.
+    </P
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="AEN2436">D.5.1. Things that have caused problems and should be avoided</H2
+><P
+></P
+><OL
+TYPE="1"
+><LI
+><P
+>&#13;            Usage of variables in Regular Expressions
+          </P
+><P
+>&#13;            It is very important that you don't use a variable in a regular
+            expression unless that variable is supposed to contain an expression.
+            This especially applies when using grep.  You should use:
+          </P
+><P
+>&#13;            <TABLE
+BORDER="0"
+BGCOLOR="#E0E0E0"
+WIDTH="100%"
+><TR
+><TD
+><FONT
+COLOR="#000000"
+><PRE
+CLASS="programlisting"
+>&#13;grep ($_ eq $value, @array);
+            </PRE
+></FONT
+></TD
+></TR
+></TABLE
+>
+          </P
+><P
+>&#13;            -- NOT THIS --
+          </P
+><P
+>&#13;            <TABLE
+BORDER="0"
+BGCOLOR="#E0E0E0"
+WIDTH="100%"
+><TR
+><TD
+><FONT
+COLOR="#000000"
+><PRE
+CLASS="programlisting"
+>&#13;grep (/$value/, @array);
+            </PRE
+></FONT
+></TD
+></TR
+></TABLE
+>
+          </P
+><DIV
+CLASS="note"
+><P
+></P
+><TABLE
+CLASS="note"
+WIDTH="100%"
+BORDER="0"
+><TR
+><TD
+WIDTH="25"
+ALIGN="CENTER"
+VALIGN="TOP"
+><IMG
+SRC="../images/note.gif"
+HSPACE="5"
+ALT="Note"></TD
+><TD
+ALIGN="LEFT"
+VALIGN="TOP"
+><P
+>&#13;              If you need to use a non-expression variable inside of an expression, be
+              sure to quote it properly (using <TT
+CLASS="function"
+>\Q..\E</TT
+>).
+            </P
+></TD
+></TR
+></TABLE
+></DIV
+></LI
+></OL
+></DIV
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="AEN2450">D.5.2. Coding Style for Bugzilla</H2
+><P
+>&#13;        While it's true that not all of the code currently in Bugzilla adheres to
+        this (or any) styleguide, it is something that is being worked toward.  Therefore,
+        we ask that all new code (submitted patches and new files) follow this guide
+        as closely as possible (if you're only changing 1 or 2 lines, you don't have
+        to reformat the entire file :).
+      </P
+><P
+>&#13;        The Bugzilla development team has decided to adopt the perl style guide as
+        published by Larry Wall.  This giude can be found in <SPAN
+CLASS="QUOTE"
+>"Programming
+        Perl"</SPAN
+> (the camel book) or by typing <B
+CLASS="command"
+>man perlstyle</B
+> at
+        your favorite shell prompt.
+      </P
+><P
+>&#13;        What appears below if a brief summary, please refer to the perl style
+        guide if you don't see your question covered here.  It is much better to submit
+	a patch which fails these criteria than no patch at all, but please try to meet
+	these minimum standards when submitting code to Bugzilla.
+      </P
+><P
+></P
+><UL
+><LI
+><P
+>&#13;            Whitespace
+          </P
+><P
+>&#13;            Bugzilla's preferred indentation is 4 spaces (no tabs, please).
+          </P
+></LI
+><LI
+><P
+>&#13;            Curly braces.
+          </P
+><P
+>&#13;            The opening brace of a block should be on the same line as the statement
+            that is causing the block and the closing brace should be at the same
+            indentation level as that statement, for example:
+          </P
+><P
+>&#13;            <TABLE
+BORDER="0"
+BGCOLOR="#E0E0E0"
+WIDTH="100%"
+><TR
+><TD
+><FONT
+COLOR="#000000"
+><PRE
+CLASS="programlisting"
+>&#13;if ($var) {
+    print "The variable is true";
+}
+else {
+    print "Try again";
+}
+            </PRE
+></FONT
+></TD
+></TR
+></TABLE
+>
+          </P
+><P
+>&#13;            -- NOT THIS --
+          </P
+><P
+>&#13;            <TABLE
+BORDER="0"
+BGCOLOR="#E0E0E0"
+WIDTH="100%"
+><TR
+><TD
+><FONT
+COLOR="#000000"
+><PRE
+CLASS="programlisting"
+>&#13;if ($var)
+{
+    print "The variable is true";
+}
+else
+{
+    print "Try again";
+}
+            </PRE
+></FONT
+></TD
+></TR
+></TABLE
+>
+          </P
+></LI
+><LI
+><P
+>&#13;	    Cookies
+	  </P
+><P
+>&#13;	    Bugzilla uses cookies to ease the user experience, but no new patches
+	    should <EM
+>require</EM
+> user-side cookies.
+	  </P
+></LI
+><LI
+><P
+>&#13;            File Names
+          </P
+><P
+>&#13;            File names for bugzilla code and support documention should be legal across
+            multiple platforms. <TT
+CLASS="computeroutput"
+>\ / : * ? " &#60; &#62;</TT
+>
+            and <TT
+CLASS="computeroutput"
+>|</TT
+> are all illegal characters for filenames
+            on various platforms.  Also, file names should not have spaces in them as they
+            can cause confusion in CVS and other mozilla.org utilities.
+          </P
+></LI
+><LI
+><P
+>&#13;	    Javascript dependencies
+	  </P
+><P
+>&#13;	    While Bugzilla uses Javascript to make the user experience easier, no patch
+	    to Bugzilla should <EM
+>require</EM
+> Javascript.
+	  </P
+></LI
+><LI
+><P
+>&#13;	    Patch Format
+	  </P
+><P
+>&#13;	    All patches submitted for inclusion into Bugzilla should be in the form of a
+	    <SPAN
+CLASS="QUOTE"
+>"unified diff"</SPAN
+>.  This comes from using <SPAN
+CLASS="QUOTE"
+>"diff -u"</SPAN
+>
+	    instead of simply <SPAN
+CLASS="QUOTE"
+>"diff"</SPAN
+> when creating your patch.  This will
+	    result in quicker acceptance of the patch.
+	  </P
+></LI
+><LI
+><P
+>&#13;	    Schema Changes
+	  </P
+><P
+>&#13;	    If you make schema changes, you should modify <TT
+CLASS="filename"
+>sanitycheck.cgi</TT
+>
+	    to support the new schema.  All referential columns should be checked.
+	  </P
+></LI
+><LI
+><P
+>&#13;	    Taint Mode
+	  </P
+><P
+>&#13;	    All new cgis must run in Taint mode (Perl taint and DBI taint), and existing cgi's
+	    which run in taint mode must not have taint mode turned off.
+	  </P
+></LI
+><LI
+><P
+>&#13;	    Templatization
+	  </P
+><P
+>&#13;	    Patches to Bugzilla need to support templates so they do not force user interface choices
+	    on Bugzilla administrators.
+	  </P
+></LI
+><LI
+><P
+>&#13;            Variable Names
+          </P
+><P
+>&#13;            If a variable is scoped globally (<TT
+CLASS="computeroutput"
+>$::variable</TT
+>)
+            its name should be descriptive of what it contains.  Local variables can be named
+            a bit looser, provided the context makes their content obvious.  For example,
+            <TT
+CLASS="computeroutput"
+>$ret</TT
+> could be used as a staging variable for a
+             routine's return value as the line <TT
+CLASS="computeroutput"
+>return $ret;</TT
+>
+             will make it blatantly obvious what the variable holds and most likely be shown
+             on the same screen as <TT
+CLASS="computeroutput"
+>my $ret = "";</TT
+>.
+          </P
+></LI
+><LI
+><P
+>&#13;            Cross Database Compatability
+          </P
+><P
+>&#13;            Bugzilla was originally written to work with MySQL and therefore took advantage
+            of some of its features that aren't contained in other RDBMS software.  These
+            should be avoided in all new code.  Examples of these features are enums and
+            <TT
+CLASS="function"
+>encrypt()</TT
+>.
+          </P
+></LI
+><LI
+><P
+>&#13;            Cross Platform Compatability
+          </P
+><P
+>&#13;            While Bugzilla was written to be used on Unix based systems (and Unix/Linux is
+            still the only officially supported platform) there are many who desire/need to
+            run Bugzilla on Microsoft Windows boxes.  Whenever possible, we should strive
+            not to make the lives of these people any more complicated and avoid doing things
+            that break Bugzilla's ability to run on multiple operating systems.
+          </P
+></LI
+></UL
+></DIV
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="quicksearch.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="gfdl.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>The Quicksearch Utility</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="patches.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>GNU Free Documentation License</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/cmdline.html

@@ -0,0 +1,269 @@
+<HTML
+><HEAD
+><TITLE
+>Command-line Bugzilla Queries</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="Useful Patches and Utilities for Bugzilla"
+HREF="patches.html"><LINK
+REL="PREVIOUS"
+TITLE="The setperl.csh Utility"
+HREF="setperl.html"><LINK
+REL="NEXT"
+TITLE="The Quicksearch Utility"
+HREF="quicksearch.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="setperl.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Appendix D. Useful Patches and Utilities for Bugzilla</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="quicksearch.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="cmdline">D.3. Command-line Bugzilla Queries</H1
+><P
+>&#13;      Users can query Bugzilla from the command line using this suite
+      of utilities.
+    </P
+><P
+>&#13;      The query.conf file contains the mapping from options to field
+      names and comparison types.  Quoted option names are "grepped"
+      for, so it should be easy to edit this file.  Comments (#) have
+      no effect; you must make sure these lines do not contain any
+      quoted "option"
+    </P
+><P
+>&#13;      buglist is a shell script which submits a Bugzilla query and
+      writes the resulting HTML page to stdout.  It supports both
+      short options, (such as "-Afoo" or "-Rbar") and long options
+      (such as "--assignedto=foo" or "--reporter=bar").  If the first
+      character of an option is not "-", it is treated as if it were
+      prefixed with "--default=".
+    </P
+><P
+>&#13;      The columlist is taken from the COLUMNLIST environment variable.
+      This is equivalent to the "Change Columns" option when you list
+      bugs in buglist.cgi.  If you have already used Bugzilla, use
+      <B
+CLASS="command"
+>grep COLUMLIST ~/.netscape/cookies</B
+> to see
+      your current COLUMNLIST setting.
+    </P
+><P
+>&#13;      bugs is a simple shell script which calls buglist and extracts
+      the bug numbers from the output.  Adding the prefix
+      "http://bugzilla.mozilla.org/buglist.cgi?bug_id=" turns the bug
+      list into a working link if any bugs are found. Counting bugs is
+      easy.  Pipe the results through <B
+CLASS="command"
+>sed -e 's/,/ /g' | wc |
+	awk '{printf $2 "\n"}'</B
+>
+    </P
+><P
+>&#13;      Akkana says she has good results piping buglist output through
+      <B
+CLASS="command"
+>w3m -T text/html -dump</B
+>
+    </P
+><DIV
+CLASS="procedure"
+><OL
+TYPE="1"
+><LI
+><P
+>&#13;	  Download three files:
+	</P
+><OL
+CLASS="SUBSTEPS"
+TYPE="a"
+><LI
+><P
+>&#13;	      <TT
+CLASS="computeroutput"
+> <TT
+CLASS="prompt"
+>bash$</TT
+> <B
+CLASS="command"
+>wget -O
+		  query.conf
+		  'http://bugzilla.mozilla.org/showattachment.cgi?attach_id=26157'</B
+> </TT
+>
+	    </P
+></LI
+><LI
+><P
+>&#13;	      <TT
+CLASS="computeroutput"
+> <TT
+CLASS="prompt"
+>bash$</TT
+> <B
+CLASS="command"
+>wget -O
+		  buglist
+		  'http://bugzilla.mozilla.org/showattachment.cgi?attach_id=26944'</B
+> </TT
+>
+	    </P
+></LI
+><LI
+><P
+>&#13;	      <TT
+CLASS="computeroutput"
+> <TT
+CLASS="prompt"
+>bash#</TT
+> <B
+CLASS="command"
+>wget -O
+		  bugs
+		  'http://bugzilla.mozilla.org/showattachment.cgi?attach_id=26215'</B
+> </TT
+>
+	    </P
+></LI
+></OL
+></LI
+><LI
+><P
+>&#13;	  Make your utilities executable:
+	  <TT
+CLASS="computeroutput"
+>&#13;	    <TT
+CLASS="prompt"
+>bash$</TT
+>
+	    <B
+CLASS="command"
+>chmod u+x buglist bugs</B
+>
+	  </TT
+>
+	</P
+></LI
+></OL
+></DIV
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="setperl.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="quicksearch.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>The setperl.csh Utility</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="patches.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>The Quicksearch Utility</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/contributors.html

@@ -0,0 +1,150 @@
+<HTML
+><HEAD
+><TITLE
+>Contributors</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="About This Guide"
+HREF="about.html"><LINK
+REL="PREVIOUS"
+TITLE="Credits"
+HREF="credits.html"><LINK
+REL="NEXT"
+TITLE="Feedback"
+HREF="feedback.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="credits.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 1. About This Guide</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="feedback.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="contributors">1.6. Contributors</H1
+><P
+>&#13;      Thanks go to these people for significant contributions to this
+      documentation (in no particular order):
+    </P
+><P
+>&#13;      Andrew Pearson, Spencer Smith, Eric Hanson, Kevin Brannen, Ron
+      Teitelbaum, Jacob Steenhagen, Joe Robins
+    </P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="credits.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="feedback.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Credits</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="about.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Feedback</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/conventions.html

@@ -0,0 +1,462 @@
+<HTML
+><HEAD
+><TITLE
+>Document Conventions</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="About This Guide"
+HREF="about.html"><LINK
+REL="PREVIOUS"
+TITLE="Translations"
+HREF="translations.html"><LINK
+REL="NEXT"
+TITLE="Using Bugzilla"
+HREF="using.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="translations.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 1. About This Guide</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="using.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="conventions">1.7. Document Conventions</H1
+><P
+>&#13;    This document uses the following conventions
+  </P
+><DIV
+CLASS="informaltable"
+><A
+NAME="AEN91"><P
+></P
+><TABLE
+BORDER="0"
+CLASS="CALSTABLE"
+><THEAD
+><TR
+><TH
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>Descriptions</TH
+><TH
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>Appearance</TH
+></TR
+></THEAD
+><TBODY
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>Warnings</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><DIV
+CLASS="caution"
+><P
+></P
+><TABLE
+CLASS="caution"
+WIDTH="100%"
+BORDER="0"
+><TR
+><TD
+WIDTH="25"
+ALIGN="CENTER"
+VALIGN="TOP"
+><IMG
+SRC="../images/caution.gif"
+HSPACE="5"
+ALT="Caution"></TD
+><TD
+ALIGN="LEFT"
+VALIGN="TOP"
+><P
+>Don't run with scissors!</P
+></TD
+></TR
+></TABLE
+></DIV
+></TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>Hint</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><DIV
+CLASS="tip"
+><P
+></P
+><TABLE
+CLASS="tip"
+WIDTH="100%"
+BORDER="0"
+><TR
+><TD
+WIDTH="25"
+ALIGN="CENTER"
+VALIGN="TOP"
+><IMG
+SRC="../images/tip.gif"
+HSPACE="5"
+ALT="Tip"></TD
+><TD
+ALIGN="LEFT"
+VALIGN="TOP"
+><P
+>Warm jar lids under the hot tap to loosen them.</P
+></TD
+></TR
+></TABLE
+></DIV
+></TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>Notes</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><DIV
+CLASS="note"
+><P
+></P
+><TABLE
+CLASS="note"
+WIDTH="100%"
+BORDER="0"
+><TR
+><TD
+WIDTH="25"
+ALIGN="CENTER"
+VALIGN="TOP"
+><IMG
+SRC="../images/note.gif"
+HSPACE="5"
+ALT="Note"></TD
+><TD
+ALIGN="LEFT"
+VALIGN="TOP"
+><P
+>Dear John...</P
+></TD
+></TR
+></TABLE
+></DIV
+></TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>Information requiring special attention</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><DIV
+CLASS="warning"
+><P
+></P
+><TABLE
+CLASS="warning"
+WIDTH="100%"
+BORDER="0"
+><TR
+><TD
+WIDTH="25"
+ALIGN="CENTER"
+VALIGN="TOP"
+><IMG
+SRC="../images/warning.gif"
+HSPACE="5"
+ALT="Warning"></TD
+><TD
+ALIGN="LEFT"
+VALIGN="TOP"
+><P
+>Read this or the cat gets it.</P
+></TD
+></TR
+></TABLE
+></DIV
+></TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>File Names</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><TT
+CLASS="filename"
+>file.extension</TT
+></TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>Directory Names</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><TT
+CLASS="filename"
+>directory</TT
+></TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>Commands to be typed</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><B
+CLASS="command"
+>command</B
+></TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>Applications Names</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><SPAN
+CLASS="application"
+>application</SPAN
+></TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><I
+CLASS="foreignphrase"
+>Prompt</I
+> of users command under bash shell</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>bash$</TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><I
+CLASS="foreignphrase"
+>Prompt</I
+> of root users command under bash shell</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>bash#</TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><I
+CLASS="foreignphrase"
+>Prompt</I
+> of user command under tcsh shell</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>tcsh$</TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>Environment Variables</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><TT
+CLASS="envar"
+>VARIABLE</TT
+></TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>Emphasized word</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><EM
+>word</EM
+></TD
+></TR
+><TR
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+>Code Example</TD
+><TD
+ALIGN="LEFT"
+VALIGN="MIDDLE"
+><TABLE
+BORDER="0"
+BGCOLOR="#E0E0E0"
+WIDTH="100%"
+><TR
+><TD
+><FONT
+COLOR="#000000"
+><PRE
+CLASS="programlisting"
+><TT
+CLASS="sgmltag"
+>&#60;para&#62;</TT
+>Beginning and end of paragraph<TT
+CLASS="sgmltag"
+>&#60;/para&#62;</TT
+></PRE
+></FONT
+></TD
+></TR
+></TABLE
+></TD
+></TR
+></TBODY
+></TABLE
+><P
+></P
+></DIV
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="translations.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="using.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Translations</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="about.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Using Bugzilla</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/copyright.html

@@ -0,0 +1,191 @@
+<HTML
+><HEAD
+><TITLE
+>Copyright Information</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="About This Guide"
+HREF="about.html"><LINK
+REL="PREVIOUS"
+TITLE="Purpose and Scope of this Guide"
+HREF="aboutthisguide.html"><LINK
+REL="NEXT"
+TITLE="Disclaimer"
+HREF="disclaimer.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="aboutthisguide.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 1. About This Guide</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="disclaimer.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="copyright">1.2. Copyright Information</H1
+><A
+NAME="AEN39"><TABLE
+BORDER="0"
+WIDTH="100%"
+CELLSPACING="0"
+CELLPADDING="0"
+CLASS="BLOCKQUOTE"
+><TR
+><TD
+WIDTH="10%"
+VALIGN="TOP"
+>&nbsp;</TD
+><TD
+WIDTH="80%"
+VALIGN="TOP"
+><P
+>&#13;	Permission is granted to copy, distribute and/or modify this
+	document under the terms of the GNU Free Documentation
+	License, Version 1.1 or any later version published  by the
+	Free Software Foundation; with no Invariant Sections, no
+	Front-Cover Texts, and  with no Back-Cover Texts.  A copy of
+	the license is included in the section entitled  "GNU Free
+	Documentation License".
+      </P
+></TD
+><TD
+WIDTH="10%"
+VALIGN="TOP"
+>&nbsp;</TD
+></TR
+><TR
+><TD
+COLSPAN="2"
+ALIGN="RIGHT"
+VALIGN="TOP"
+>--<SPAN
+CLASS="attribution"
+>Copyright (c) 2000-2002 Matthew P. Barnson and The Bugzilla Team</SPAN
+></TD
+><TD
+WIDTH="10%"
+>&nbsp;</TD
+></TR
+></TABLE
+><P
+>&#13;      If you have any questions regarding this document, its
+      copyright, or publishing this document in non-electronic form,
+      please contact The Bugzilla Team. 
+    </P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="aboutthisguide.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="disclaimer.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Purpose and Scope of this Guide</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="about.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Disclaimer</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/credits.html

@@ -0,0 +1,208 @@
+<HTML
+><HEAD
+><TITLE
+>Credits</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="About This Guide"
+HREF="about.html"><LINK
+REL="PREVIOUS"
+TITLE="New Versions"
+HREF="newversions.html"><LINK
+REL="NEXT"
+TITLE="Translations"
+HREF="translations.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="newversions.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 1. About This Guide</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="translations.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="credits">1.5. Credits</H1
+><P
+>&#13;      The people listed below have made enormous contributions to the
+      creation of this Guide, through their dedicated hacking efforts,
+      numerous e-mail and IRC support sessions, and overall excellent
+      contribution to the Bugzilla community:
+    </P
+><P
+>&#13;      <A
+HREF="mailto://mbarnson@sisna.com"
+TARGET="_top"
+>Matthew P. Barnson</A
+>
+      for pulling together the Bugzilla Guide and shepherding it to 2.14.
+    </P
+><P
+>&#13;      <A
+HREF="mailto://terry@mozilla.org"
+TARGET="_top"
+>Terry Weissman</A
+>
+      for initially writing Bugzilla and creating the
+      README upon which the UNIX installation documentation is largely based.
+    </P
+><P
+>&#13;      <A
+HREF="mailto://tara@tequilarista.org"
+TARGET="_top"
+>Tara
+	Hernandez</A
+>  for keeping Bugzilla development going
+      strong after Terry left Mozilla.org
+    </P
+><P
+>&#13;      <A
+HREF="mailto://dkl@redhat.com"
+TARGET="_top"
+>Dave Lawrence</A
+> for
+      providing insight into the key differences between Red Hat's
+      customized Bugzilla, and being largely responsible for the "Red
+      Hat Bugzilla" appendix
+    </P
+><P
+>&#13;      <A
+HREF="mailto://endico@mozilla.org"
+TARGET="_top"
+>Dawn Endico</A
+> for
+      being a hacker extraordinaire and putting up with my incessant
+      questions and arguments on irc.mozilla.org in #mozwebtools
+    </P
+><P
+>&#13;      Last but not least, all the members of the <A
+HREF="news://news.mozilla.org/netscape/public/mozilla/webtools"
+TARGET="_top"
+> netscape.public.mozilla.webtools</A
+> newsgroup.  Without your discussions, insight, suggestions, and patches, this could never have happened.
+    </P
+><P
+>&#13;      Thanks also go to the following people for significant contributions 
+      to this documentation (in no particular order):
+    </P
+><P
+>&#13;      Zach Liption, Andrew Pearson, Spencer Smith, Eric Hanson, Kevin Brannen,
+      Ron Teitelbaum, Jacob Steenhagen, Joe Robins.
+    </P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="newversions.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="translations.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>New Versions</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="about.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Translations</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/cust-templates.html

@@ -0,0 +1,306 @@
+<HTML
+><HEAD
+><TITLE
+>Template Customisation</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="Administering Bugzilla"
+HREF="administration.html"><LINK
+REL="PREVIOUS"
+TITLE="Bugzilla Security"
+HREF="security.html"><LINK
+REL="NEXT"
+TITLE="Integrating Bugzilla with Third-Party Tools"
+HREF="integration.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="security.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 5. Administering Bugzilla</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="integration.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="cust-templates">5.7. Template Customisation</H1
+><P
+>&#13;      One of the large changes for 2.16 was the templatisation of the
+      entire user-facing UI, using the 
+      <A
+HREF="http://www.template-toolkit.org"
+TARGET="_top"
+>Template Toolkit</A
+>.
+      Administrators can now configure the look and feel of Bugzilla without
+      having to edit Perl files or face the nightmare of massive merge
+      conflicts when they upgrade to a newer version in the future.
+    </P
+><P
+>&#13;      Templatisation also makes localised versions of Bugzilla possible, 
+      for the first time. In the future, a Bugzilla installation may
+      have templates installed for multiple localisations, and select
+      which ones to use based on the user's browser language setting.      
+    </P
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="AEN1611">5.7.1. What to Edit</H2
+><P
+>&#13;        There are several ways to take advantage of Bugzilla's templates,
+        and which you use depends on what you want to do. The Bugzilla
+        template directory structure is that there's a top level directory,
+        <TT
+CLASS="filename"
+>template</TT
+>, which contains a directory for
+        each installed localisation. The default English templates are
+        therefore in <TT
+CLASS="filename"
+>en</TT
+>. Underneath that, there
+        are two directories - <TT
+CLASS="filename"
+>default</TT
+> and 
+        <TT
+CLASS="filename"
+>custom</TT
+>. The <TT
+CLASS="filename"
+>default</TT
+>
+        directory contains all the templates shipped with Bugzilla.
+      </P
+><P
+>&#13;        One method of making customisations is to directly edit the templates
+        in <TT
+CLASS="filename"
+>template/en/default</TT
+>. This is probably the
+        best method for small changes, because if you then execute a
+        <B
+CLASS="command"
+>cvs update</B
+>, any template fixes will get
+        automagically merged into your modified versions.
+      </P
+><P
+>&#13;        The other method is to copy the templates into 
+        <TT
+CLASS="filename"
+>template/en/custom</TT
+>. This method is better if
+        you are going to make major changes, because it is guaranteed that
+        the contents of this directory will not be touched during an upgrade,
+        and you can then decide whether to continue using your own templates,
+        or make the effort to merge your changes into the new versions by
+        hand.
+      </P
+><P
+>&#13;        The syntax of the Template Toolkit language is beyond the scope of
+        this guide. It's reasonably easy to pick up by looking at the current 
+        templates; or, you can read the manual, available on the
+        <A
+HREF="http://www.template-toolkit.org"
+TARGET="_top"
+>Template Toolkit home
+        page </A
+>.
+      </P
+></DIV
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="AEN1626">5.7.2. Particular Templates</H2
+><P
+>&#13;        There are a few templates you may be particularly interested in
+        customising for your installation.
+      </P
+><P
+>&#13;        <B
+CLASS="command"
+>global/header.html.tmpl</B
+> and
+        <B
+CLASS="command"
+>global/footer.html.tmpl</B
+>:
+        These define the header and footer that go on all Bugzilla pages.
+        Editing these is a way to quickly get a distinctive look and
+        feel for your Bugzilla installation.
+      </P
+></DIV
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="AEN1632">5.7.3. Template Formats</H2
+><P
+>&#13;        Some CGIs have the ability to use more than one template. For
+        example, buglist.cgi can output bug lists as RDF or two
+        different forms of HTML (complex and simple). (Try this out
+        by appending <TT
+CLASS="filename"
+>&#38;format=simple</TT
+> to a buglist.cgi
+        URL on your Bugzilla installation.) This
+        mechanism, called template 'formats', is extensible.
+      </P
+><P
+>&#13;        To see if a CGI supports multiple output formats, grep the
+        CGI for "ValidateOutputFormat". If it's not present, adding
+        multiple format support isn't too hard - see how it's done in
+        other CGIs.
+      </P
+><P
+>&#13;        To make a new format template for a CGI which supports this, 
+        open a current template for
+        that CGI and take note of the INTERFACE comment (if present.) This 
+        comment defines what variables are passed into this template. If 
+        there isn't one, I'm afraid you'll have to read the template and
+        the code to find out what information you get. 
+      </P
+><P
+>&#13;        Write your template in whatever markup or text style is appropriate.
+      </P
+><P
+>&#13;        You now need to decide what content type you want your template
+        served as. Open up the localconfig file and find the $contenttypes
+        variable. If your content type is not there, add it. Remember
+        the three- or four-letter tag assigned to you content type. 
+        This tag will be part of the template filename.
+      </P
+><P
+>&#13;        Save the template as <TT
+CLASS="filename"
+>&#60;stubname&#62;-&#60;formatname&#62;.&#60;contenttypetag&#62;.tmpl</TT
+>. 
+        Try out the template by calling the CGI as 
+        <TT
+CLASS="filename"
+>&#60;cginame&#62;.cgi?format=&#60;formatname&#62;</TT
+> .
+      </P
+></DIV
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="security.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="integration.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Bugzilla Security</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="administration.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Integrating Bugzilla with Third-Party Tools</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/cvs.html

@@ -0,0 +1,174 @@
+<HTML
+><HEAD
+><TITLE
+>CVS</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="Integrating Bugzilla with Third-Party Tools"
+HREF="integration.html"><LINK
+REL="PREVIOUS"
+TITLE="Bonsai"
+HREF="bonsai.html"><LINK
+REL="NEXT"
+TITLE="Perforce SCM"
+HREF="scm.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="bonsai.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 5. Integrating Bugzilla with Third-Party Tools</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="scm.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="cvs">5.2. CVS</H1
+><P
+>CVS integration is best accomplished, at this point, using
+      the Bugzilla Email Gateway.  There have been some files
+      submitted to allow greater CVS integration, but we need to make
+      certain that Bugzilla is not tied into one particular software
+      management package.</P
+><P
+>&#13;      Follow the instructions in the FAQ for enabling Bugzilla e-mail
+      integration.  Ensure that your check-in script sends an email to
+      your Bugzilla e-mail gateway with the subject of <SPAN
+CLASS="QUOTE"
+>"[Bug
+	XXXX]"</SPAN
+>, and you can have CVS check-in comments append
+      to your Bugzilla bug.  If you have your check-in script include
+      an @resolution field, you can even change the Bugzilla bug
+      state.
+    </P
+><P
+>&#13;      There is also a project, based upon somewhat dated Bugzilla
+      code, to integrate CVS and Bugzilla through CVS' ability to
+      email.  Check it out at:
+      <A
+HREF="http://homepages.kcbbs.gen.nz/~tonyg/"
+TARGET="_top"
+>&#13;      http://homepages.kcbbs.gen.nz/~tonyg/</A
+>, under the
+      <SPAN
+CLASS="QUOTE"
+>"cvszilla"</SPAN
+> link.
+    </P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="bonsai.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="scm.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Bonsai</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="integration.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Perforce SCM</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/database.html

@@ -0,0 +1,185 @@
+<HTML
+><HEAD
+><TITLE
+>The Bugzilla Database</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="PREVIOUS"
+TITLE="Software Download Links"
+HREF="downloadlinks.html"><LINK
+REL="NEXT"
+TITLE="Database Schema Chart"
+HREF="dbschema.html"></HEAD
+><BODY
+CLASS="appendix"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="downloadlinks.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+></TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="dbschema.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="appendix"
+><H1
+><A
+NAME="database">Appendix C. The Bugzilla Database</H1
+><DIV
+CLASS="TOC"
+><DL
+><DT
+><B
+>Table of Contents</B
+></DT
+><DT
+>C.1. <A
+HREF="dbschema.html"
+>Database Schema Chart</A
+></DT
+><DT
+>C.2. <A
+HREF="dbdoc.html"
+>MySQL Bugzilla Database Introduction</A
+></DT
+><DT
+>C.3. <A
+HREF="granttables.html"
+>MySQL Permissions &#38; Grant Tables</A
+></DT
+></DL
+></DIV
+><DIV
+CLASS="note"
+><P
+></P
+><TABLE
+CLASS="note"
+WIDTH="100%"
+BORDER="0"
+><TR
+><TD
+WIDTH="25"
+ALIGN="CENTER"
+VALIGN="TOP"
+><IMG
+SRC="../images/note.gif"
+HSPACE="5"
+ALT="Note"></TD
+><TD
+ALIGN="LEFT"
+VALIGN="TOP"
+><P
+>&#13;      This document really needs to be updated with more fleshed out information about primary keys, interrelationships, and maybe some nifty tables to document dependencies.  Any takers?
+    </P
+></TD
+></TR
+></TABLE
+></DIV
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="downloadlinks.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="dbschema.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Software Download Links</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+>&nbsp;</TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Database Schema Chart</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/dbdoc.html

@@ -0,0 +1,576 @@
+<HTML
+><HEAD
+><TITLE
+>MySQL Bugzilla Database Introduction</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="The Bugzilla Database"
+HREF="database.html"><LINK
+REL="PREVIOUS"
+TITLE="Database Schema Chart"
+HREF="dbschema.html"><LINK
+REL="NEXT"
+TITLE="MySQL Permissions & Grant Tables"
+HREF="granttables.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="dbschema.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Appendix C. The Bugzilla Database</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="granttables.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="dbdoc">C.2. MySQL Bugzilla Database Introduction</H1
+><P
+>&#13;      This information comes straight from my life.  I was forced to learn how
+      Bugzilla organizes database because of nitpicky requests from users for tiny
+      changes in wording, rather than having people re-educate themselves or
+      figure out how to work our procedures around the tool.  It sucks, but it can
+      and will happen to you, so learn how the schema works and deal with it when it
+      comes.
+    </P
+><P
+>&#13;      So, here you are with your brand-new installation of Bugzilla.  You've got
+      MySQL set up, Apache working right, Perl DBI and DBD talking to the database
+      flawlessly.  Maybe you've even entered a few test bugs to make sure email's
+      working; people seem to be notified of new bugs and changes, and you can
+      enter and edit bugs to your heart's content.  Perhaps you've gone through the
+      trouble of setting up a gateway for people to submit bugs to your database via
+      email, have had a few people test it, and received rave reviews from your beta
+      testers.
+    </P
+><P
+>&#13;      What's the next thing you do?  Outline a training strategy for your
+      development team, of course, and bring them up to speed on the new tool you've
+      labored over for hours.
+    </P
+><P
+>&#13;      Your first training session starts off very well!  You have a captive
+      audience which seems enraptured by the efficiency embodied in this thing called
+      "Bugzilla".  You are caught up describing the nifty features, how people can
+      save favorite queries in the database, set them up as headers and footers on
+      their pages, customize their layouts, generate reports, track status with
+      greater efficiency than ever before, leap tall buildings with a single bound
+      and rescue Jane from the clutches of Certain Death!
+    </P
+><P
+>&#13;      But Certain Death speaks up -- a tiny voice, from the dark corners of the
+      conference room.  "I have a concern," the voice hisses from the darkness,
+      "about the use of the word 'verified'.
+    </P
+><P
+>&#13;      The room, previously filled with happy chatter, lapses into reverential
+      silence as Certain Death (better known as the Vice President of Software
+      Engineering) continues.  "You see, for two years we've used the word 'verified'
+      to indicate that a developer or quality assurance engineer has confirmed that,
+      in fact, a bug is valid. I don't want to lose two years of training to a
+      new software product.  You need to change the bug status of 'verified' to
+      'approved' as soon as possible. To avoid confusion, of course."
+    </P
+><P
+>&#13;      Oh no!  Terror strikes your heart, as you find yourself mumbling "yes, yes, I
+      don't think that would be a problem," You review the changes with Certain
+      Death, and continue to jabber on, "no, it's not too big a change. I mean, we
+      have the source code, right? You know, 'Use the Source, Luke' and all that...
+      no problem," All the while you quiver inside like a beached jellyfish bubbling,
+      burbling, and boiling on a hot Jamaican sand dune...
+    </P
+><P
+>&#13;      Thus begins your adventure into the heart of Bugzilla.  You've been forced
+      to learn about non-portable enum() fields, varchar columns, and tinyint
+      definitions. The Adventure Awaits You!
+    </P
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="AEN2272">C.2.1. Bugzilla Database Basics</H2
+><P
+>&#13;	If you were like me, at this point you're totally clueless
+	about the internals of MySQL, and if it weren't for this
+	executive order from the Vice President you couldn't care less
+	about the difference between a <SPAN
+CLASS="QUOTE"
+>"bigint"</SPAN
+> and a
+	<SPAN
+CLASS="QUOTE"
+>"tinyint"</SPAN
+> entry in MySQL.   I recommend you refer
+	to the MySQL documentation, available at <A
+HREF="http://www.mysql.com/doc.html"
+TARGET="_top"
+>MySQL.com</A
+>.  Below are the basics you need to know about the Bugzilla database.  Check the chart above for more details.
+      </P
+><P
+><P
+></P
+><OL
+TYPE="1"
+><LI
+><P
+>&#13;	      To connect to your database:
+	    </P
+><P
+>&#13;	      <TT
+CLASS="prompt"
+>bash#</TT
+><B
+CLASS="command"
+>mysql</B
+><TT
+CLASS="parameter"
+><I
+>-u root</I
+></TT
+>
+	    </P
+><P
+>&#13;	      If this works without asking you for a password,
+	      <EM
+>shame on you</EM
+>!  You should have
+	      locked your security down like the installation
+	      instructions told you to.  You can find details on
+	      locking down your database in the Bugzilla FAQ in this
+	      directory (under "Security"), or more robust security
+	      generalities in the MySQL searchable documentation at
+	      http://www.mysql.com/php/manual.php3?section=Privilege_system .
+	    </P
+></LI
+><LI
+><P
+>You should now be at a prompt that looks like
+	      this:</P
+><P
+><TT
+CLASS="prompt"
+>mysql&#62;</TT
+></P
+><P
+>At the prompt, if <SPAN
+CLASS="QUOTE"
+>"bugs"</SPAN
+> is the name
+	      you chose in the<TT
+CLASS="filename"
+>localconfig</TT
+> file
+	      for your Bugzilla database, type:</P
+><P
+><TT
+CLASS="prompt"
+>mysql</TT
+><B
+CLASS="command"
+>use bugs;</B
+></P
+><DIV
+CLASS="note"
+><P
+></P
+><TABLE
+CLASS="note"
+WIDTH="100%"
+BORDER="0"
+><TR
+><TD
+WIDTH="25"
+ALIGN="CENTER"
+VALIGN="TOP"
+><IMG
+SRC="../images/note.gif"
+HSPACE="5"
+ALT="Note"></TD
+><TD
+ALIGN="LEFT"
+VALIGN="TOP"
+><P
+>Don't forget the <SPAN
+CLASS="QUOTE"
+>";"</SPAN
+> at the end of
+		each line, or you'll be kicking yourself later.</P
+></TD
+></TR
+></TABLE
+></DIV
+></LI
+></OL
+>
+      </P
+><DIV
+CLASS="section"
+><H3
+CLASS="section"
+><A
+NAME="AEN2301">C.2.1.1. Bugzilla Database Tables</H3
+><P
+>  Imagine your MySQL database as a series of
+	  spreadsheets, and you won't be too far off.  If you use this
+	  command:</P
+><P
+><TT
+CLASS="prompt"
+>mysql&#62;</TT
+><B
+CLASS="command"
+>show tables from bugs;</B
+></P
+><P
+>you'll be able to see all the
+	  <SPAN
+CLASS="QUOTE"
+>"spreadsheets"</SPAN
+> (tables) in your database.  It
+	  is similar to a file system, only faster and more robust for
+	  certain types of operations.</P
+><P
+>From the command issued above, ou should have some
+	  output that looks like this:
+	  <TABLE
+BORDER="0"
+BGCOLOR="#E0E0E0"
+WIDTH="100%"
+><TR
+><TD
+><FONT
+COLOR="#000000"
+><PRE
+CLASS="programlisting"
+>&#13;+-------------------+
+| Tables in bugs    |
++-------------------+
+| attachments       |
+| bugs              |
+| bugs_activity     |
+| cc                |
+| components        |
+| dependencies      |
+| fielddefs         |
+| groups            |
+| keyworddefs       |
+| keywords          |
+| logincookies      |
+| longdescs         |
+| milestones        |
+| namedqueries      |
+| products          |
+| profiles          |
+| profiles_activity |
+| shadowlog         |
+| tokens            |
+| versions          |
+| votes             |
+| watch             |
++-------------------+
+	  </PRE
+></FONT
+></TD
+></TR
+></TABLE
+></P
+><P
+CLASS="literallayout"
+><br>
+<br>
+&nbsp;&nbsp;Here's&nbsp;an&nbsp;overview&nbsp;of&nbsp;what&nbsp;each&nbsp;table&nbsp;does.&nbsp;&nbsp;Most&nbsp;columns&nbsp;in&nbsp;each&nbsp;table&nbsp;have<br>
+descriptive&nbsp;names&nbsp;that&nbsp;make&nbsp;it&nbsp;fairly&nbsp;trivial&nbsp;to&nbsp;figure&nbsp;out&nbsp;their&nbsp;jobs.<br>
+<br>
+attachments:&nbsp;This&nbsp;table&nbsp;stores&nbsp;all&nbsp;attachments&nbsp;to&nbsp;bugs.&nbsp;&nbsp;It&nbsp;tends&nbsp;to&nbsp;be&nbsp;your<br>
+largest&nbsp;table,&nbsp;yet&nbsp;also&nbsp;generally&nbsp;has&nbsp;the&nbsp;fewest&nbsp;entries&nbsp;because&nbsp;file<br>
+attachments&nbsp;are&nbsp;so&nbsp;(relatively)&nbsp;large.<br>
+<br>
+bugs:&nbsp;&nbsp;This&nbsp;is&nbsp;the&nbsp;core&nbsp;of&nbsp;your&nbsp;system.&nbsp;&nbsp;The&nbsp;bugs&nbsp;table&nbsp;stores&nbsp;most&nbsp;of&nbsp;the<br>
+current&nbsp;information&nbsp;about&nbsp;a&nbsp;bug,&nbsp;with&nbsp;the&nbsp;exception&nbsp;of&nbsp;the&nbsp;info&nbsp;stored&nbsp;in&nbsp;the<br>
+other&nbsp;tables.<br>
+<br>
+bugs_activity:&nbsp;&nbsp;This&nbsp;stores&nbsp;information&nbsp;regarding&nbsp;what&nbsp;changes&nbsp;are&nbsp;made&nbsp;to&nbsp;bugs<br>
+when&nbsp;--&nbsp;a&nbsp;history&nbsp;file.<br>
+<br>
+cc:&nbsp;&nbsp;This&nbsp;tiny&nbsp;table&nbsp;simply&nbsp;stores&nbsp;all&nbsp;the&nbsp;CC&nbsp;information&nbsp;for&nbsp;any&nbsp;bug&nbsp;which&nbsp;has<br>
+any&nbsp;entries&nbsp;in&nbsp;the&nbsp;CC&nbsp;field&nbsp;of&nbsp;the&nbsp;bug.&nbsp;&nbsp;Note&nbsp;that,&nbsp;like&nbsp;most&nbsp;other&nbsp;tables&nbsp;in<br>
+Bugzilla,&nbsp;it&nbsp;does&nbsp;not&nbsp;refer&nbsp;to&nbsp;users&nbsp;by&nbsp;their&nbsp;user&nbsp;names,&nbsp;but&nbsp;by&nbsp;their&nbsp;unique<br>
+userid,&nbsp;stored&nbsp;as&nbsp;a&nbsp;primary&nbsp;key&nbsp;in&nbsp;the&nbsp;profiles&nbsp;table.<br>
+<br>
+components:&nbsp;This&nbsp;stores&nbsp;the&nbsp;programs&nbsp;and&nbsp;components&nbsp;(or&nbsp;products&nbsp;and<br>
+components,&nbsp;in&nbsp;newer&nbsp;Bugzilla&nbsp;parlance)&nbsp;for&nbsp;Bugzilla.&nbsp;&nbsp;Curiously,&nbsp;the&nbsp;"program"<br>
+(product)&nbsp;field&nbsp;is&nbsp;the&nbsp;full&nbsp;name&nbsp;of&nbsp;the&nbsp;product,&nbsp;rather&nbsp;than&nbsp;some&nbsp;other&nbsp;unique<br>
+identifier,&nbsp;like&nbsp;bug_id&nbsp;and&nbsp;user_id&nbsp;are&nbsp;elsewhere&nbsp;in&nbsp;the&nbsp;database.<br>
+<br>
+dependencies:&nbsp;Stores&nbsp;data&nbsp;about&nbsp;those&nbsp;cool&nbsp;dependency&nbsp;trees.<br>
+<br>
+fielddefs:&nbsp;&nbsp;A&nbsp;nifty&nbsp;table&nbsp;that&nbsp;defines&nbsp;other&nbsp;tables.&nbsp;&nbsp;For&nbsp;instance,&nbsp;when&nbsp;you<br>
+submit&nbsp;a&nbsp;form&nbsp;that&nbsp;changes&nbsp;the&nbsp;value&nbsp;of&nbsp;"AssignedTo"&nbsp;this&nbsp;table&nbsp;allows<br>
+translation&nbsp;to&nbsp;the&nbsp;actual&nbsp;field&nbsp;name&nbsp;"assigned_to"&nbsp;for&nbsp;entry&nbsp;into&nbsp;MySQL.<br>
+<br>
+groups:&nbsp;&nbsp;defines&nbsp;bitmasks&nbsp;for&nbsp;groups.&nbsp;&nbsp;A&nbsp;bitmask&nbsp;is&nbsp;a&nbsp;number&nbsp;that&nbsp;can&nbsp;uniquely<br>
+identify&nbsp;group&nbsp;memberships.&nbsp;&nbsp;For&nbsp;instance,&nbsp;say&nbsp;the&nbsp;group&nbsp;that&nbsp;is&nbsp;allowed&nbsp;to<br>
+tweak&nbsp;parameters&nbsp;is&nbsp;assigned&nbsp;a&nbsp;value&nbsp;of&nbsp;"1",&nbsp;the&nbsp;group&nbsp;that&nbsp;is&nbsp;allowed&nbsp;to&nbsp;edit<br>
+users&nbsp;is&nbsp;assigned&nbsp;a&nbsp;"2",&nbsp;and&nbsp;the&nbsp;group&nbsp;that&nbsp;is&nbsp;allowed&nbsp;to&nbsp;create&nbsp;new&nbsp;groups&nbsp;is<br>
+assigned&nbsp;the&nbsp;bitmask&nbsp;of&nbsp;"4".&nbsp;&nbsp;By&nbsp;uniquely&nbsp;combining&nbsp;the&nbsp;group&nbsp;bitmasks&nbsp;(much<br>
+like&nbsp;the&nbsp;chmod&nbsp;command&nbsp;in&nbsp;UNIX,)&nbsp;you&nbsp;can&nbsp;identify&nbsp;a&nbsp;user&nbsp;is&nbsp;allowed&nbsp;to&nbsp;tweak<br>
+parameters&nbsp;and&nbsp;create&nbsp;groups,&nbsp;but&nbsp;not&nbsp;edit&nbsp;users,&nbsp;by&nbsp;giving&nbsp;him&nbsp;a&nbsp;bitmask&nbsp;of<br>
+"5",&nbsp;or&nbsp;a&nbsp;user&nbsp;allowed&nbsp;to&nbsp;edit&nbsp;users&nbsp;and&nbsp;create&nbsp;groups,&nbsp;but&nbsp;not&nbsp;tweak<br>
+parameters,&nbsp;by&nbsp;giving&nbsp;him&nbsp;a&nbsp;bitmask&nbsp;of&nbsp;"6"&nbsp;Simple,&nbsp;huh?<br>
+&nbsp;&nbsp;If&nbsp;this&nbsp;makes&nbsp;no&nbsp;sense&nbsp;to&nbsp;you,&nbsp;try&nbsp;this&nbsp;at&nbsp;the&nbsp;mysql&nbsp;prompt:<br>
+mysql&#62;&nbsp;select&nbsp;*&nbsp;from&nbsp;groups;<br>
+&nbsp;&nbsp;You'll&nbsp;see&nbsp;the&nbsp;list,&nbsp;it&nbsp;makes&nbsp;much&nbsp;more&nbsp;sense&nbsp;that&nbsp;way.<br>
+<br>
+keyworddefs:&nbsp;&nbsp;Definitions&nbsp;of&nbsp;keywords&nbsp;to&nbsp;be&nbsp;used<br>
+<br>
+keywords:&nbsp;Unlike&nbsp;what&nbsp;you'd&nbsp;think,&nbsp;this&nbsp;table&nbsp;holds&nbsp;which&nbsp;keywords&nbsp;are<br>
+associated&nbsp;with&nbsp;which&nbsp;bug&nbsp;id's.<br>
+<br>
+logincookies:&nbsp;This&nbsp;stores&nbsp;every&nbsp;login&nbsp;cookie&nbsp;ever&nbsp;assigned&nbsp;to&nbsp;you&nbsp;for&nbsp;every<br>
+machine&nbsp;you've&nbsp;ever&nbsp;logged&nbsp;into&nbsp;Bugzilla&nbsp;from.&nbsp;&nbsp;Curiously,&nbsp;it&nbsp;never&nbsp;does&nbsp;any<br>
+housecleaning&nbsp;--&nbsp;I&nbsp;see&nbsp;cookies&nbsp;in&nbsp;this&nbsp;file&nbsp;I've&nbsp;not&nbsp;used&nbsp;for&nbsp;months.&nbsp;&nbsp;However,<br>
+since&nbsp;Bugzilla&nbsp;never&nbsp;expires&nbsp;your&nbsp;cookie&nbsp;(for&nbsp;convenience'&nbsp;sake),&nbsp;it&nbsp;makes<br>
+sense.<br>
+<br>
+longdescs:&nbsp;&nbsp;The&nbsp;meat&nbsp;of&nbsp;bugzilla&nbsp;--&nbsp;here&nbsp;is&nbsp;where&nbsp;all&nbsp;user&nbsp;comments&nbsp;are&nbsp;stored!<br>
+You've&nbsp;only&nbsp;got&nbsp;2^24&nbsp;bytes&nbsp;per&nbsp;comment&nbsp;(it's&nbsp;a&nbsp;mediumtext&nbsp;field),&nbsp;so&nbsp;speak<br>
+sparingly&nbsp;--&nbsp;that's&nbsp;only&nbsp;the&nbsp;amount&nbsp;of&nbsp;space&nbsp;the&nbsp;Old&nbsp;Testament&nbsp;from&nbsp;the&nbsp;Bible<br>
+would&nbsp;take&nbsp;(uncompressed,&nbsp;16&nbsp;megabytes).&nbsp;&nbsp;Each&nbsp;comment&nbsp;is&nbsp;keyed&nbsp;to&nbsp;the<br>
+bug_id&nbsp;to&nbsp;which&nbsp;it's&nbsp;attached,&nbsp;so&nbsp;the&nbsp;order&nbsp;is&nbsp;necessarily&nbsp;chronological,&nbsp;for<br>
+comments&nbsp;are&nbsp;played&nbsp;back&nbsp;in&nbsp;the&nbsp;order&nbsp;in&nbsp;which&nbsp;they&nbsp;are&nbsp;received.<br>
+<br>
+milestones:&nbsp;&nbsp;Interesting&nbsp;that&nbsp;milestones&nbsp;are&nbsp;associated&nbsp;with&nbsp;a&nbsp;specific&nbsp;product<br>
+in&nbsp;this&nbsp;table,&nbsp;but&nbsp;Bugzilla&nbsp;does&nbsp;not&nbsp;yet&nbsp;support&nbsp;differing&nbsp;milestones&nbsp;by<br>
+product&nbsp;through&nbsp;the&nbsp;standard&nbsp;configuration&nbsp;interfaces.<br>
+<br>
+namedqueries:&nbsp;&nbsp;This&nbsp;is&nbsp;where&nbsp;everybody&nbsp;stores&nbsp;their&nbsp;"custom&nbsp;queries".&nbsp;&nbsp;Very<br>
+cool&nbsp;feature;&nbsp;it&nbsp;beats&nbsp;the&nbsp;tar&nbsp;out&nbsp;of&nbsp;having&nbsp;to&nbsp;bookmark&nbsp;each&nbsp;cool&nbsp;query&nbsp;you<br>
+construct.<br>
+<br>
+products:&nbsp;&nbsp;What&nbsp;products&nbsp;you&nbsp;have,&nbsp;whether&nbsp;new&nbsp;bug&nbsp;entries&nbsp;are&nbsp;allowed&nbsp;for&nbsp;the<br>
+product,&nbsp;what&nbsp;milestone&nbsp;you're&nbsp;working&nbsp;toward&nbsp;on&nbsp;that&nbsp;product,&nbsp;votes,&nbsp;etc.&nbsp;&nbsp;It<br>
+will&nbsp;be&nbsp;nice&nbsp;when&nbsp;the&nbsp;components&nbsp;table&nbsp;supports&nbsp;these&nbsp;same&nbsp;features,&nbsp;so&nbsp;you<br>
+could&nbsp;close&nbsp;a&nbsp;particular&nbsp;component&nbsp;for&nbsp;bug&nbsp;entry&nbsp;without&nbsp;having&nbsp;to&nbsp;close&nbsp;an<br>
+entire&nbsp;product...<br>
+<br>
+profiles:&nbsp;&nbsp;Ahh,&nbsp;so&nbsp;you&nbsp;were&nbsp;wondering&nbsp;where&nbsp;your&nbsp;precious&nbsp;user&nbsp;information&nbsp;was<br>
+stored?&nbsp;&nbsp;Here&nbsp;it&nbsp;is!&nbsp;&nbsp;With&nbsp;the&nbsp;passwords&nbsp;in&nbsp;plain&nbsp;text&nbsp;for&nbsp;all&nbsp;to&nbsp;see!&nbsp;(but<br>
+sshh...&nbsp;don't&nbsp;tell&nbsp;your&nbsp;users!)<br>
+<br>
+profiles_activity:&nbsp;&nbsp;Need&nbsp;to&nbsp;know&nbsp;who&nbsp;did&nbsp;what&nbsp;when&nbsp;to&nbsp;who's&nbsp;profile?&nbsp;&nbsp;This'll<br>
+tell&nbsp;you,&nbsp;it's&nbsp;a&nbsp;pretty&nbsp;complete&nbsp;history.<br>
+<br>
+shadowlog:&nbsp;&nbsp;I&nbsp;could&nbsp;be&nbsp;mistaken&nbsp;here,&nbsp;but&nbsp;I&nbsp;believe&nbsp;this&nbsp;table&nbsp;tells&nbsp;you&nbsp;when<br>
+your&nbsp;shadow&nbsp;database&nbsp;is&nbsp;updated&nbsp;and&nbsp;what&nbsp;commands&nbsp;were&nbsp;used&nbsp;to&nbsp;update&nbsp;it.&nbsp;&nbsp;We<br>
+don't&nbsp;use&nbsp;a&nbsp;shadow&nbsp;database&nbsp;at&nbsp;our&nbsp;site&nbsp;yet,&nbsp;so&nbsp;it's&nbsp;pretty&nbsp;empty&nbsp;for&nbsp;us.<br>
+<br>
+versions:&nbsp;&nbsp;Version&nbsp;information&nbsp;for&nbsp;every&nbsp;product<br>
+<br>
+votes:&nbsp;&nbsp;Who&nbsp;voted&nbsp;for&nbsp;what&nbsp;when<br>
+<br>
+watch:&nbsp;&nbsp;Who&nbsp;(according&nbsp;to&nbsp;userid)&nbsp;is&nbsp;watching&nbsp;who's&nbsp;bugs&nbsp;(according&nbsp;to&nbsp;their<br>
+userid).<br>
+<br>
+<br>
+===<br>
+THE&nbsp;DETAILS<br>
+===<br>
+<br>
+&nbsp;&nbsp;Ahh,&nbsp;so&nbsp;you're&nbsp;wondering&nbsp;just&nbsp;what&nbsp;to&nbsp;do&nbsp;with&nbsp;the&nbsp;information&nbsp;above?&nbsp;&nbsp;At&nbsp;the<br>
+mysql&nbsp;prompt,&nbsp;you&nbsp;can&nbsp;view&nbsp;any&nbsp;information&nbsp;about&nbsp;the&nbsp;columns&nbsp;in&nbsp;a&nbsp;table&nbsp;with<br>
+this&nbsp;command&nbsp;(where&nbsp;"table"&nbsp;is&nbsp;the&nbsp;name&nbsp;of&nbsp;the&nbsp;table&nbsp;you&nbsp;wish&nbsp;to&nbsp;view):<br>
+<br>
+mysql&#62;&nbsp;show&nbsp;columns&nbsp;from&nbsp;table;<br>
+<br>
+&nbsp;&nbsp;You&nbsp;can&nbsp;also&nbsp;view&nbsp;all&nbsp;the&nbsp;data&nbsp;in&nbsp;a&nbsp;table&nbsp;with&nbsp;this&nbsp;command:<br>
+<br>
+mysql&#62;&nbsp;select&nbsp;*&nbsp;from&nbsp;table;<br>
+<br>
+&nbsp;&nbsp;--&nbsp;note:&nbsp;this&nbsp;is&nbsp;a&nbsp;very&nbsp;bad&nbsp;idea&nbsp;to&nbsp;do&nbsp;on,&nbsp;for&nbsp;instance,&nbsp;the&nbsp;"bugs"&nbsp;table&nbsp;if<br>
+you&nbsp;have&nbsp;50,000&nbsp;bugs.&nbsp;&nbsp;You'll&nbsp;be&nbsp;sitting&nbsp;there&nbsp;a&nbsp;while&nbsp;until&nbsp;you&nbsp;ctrl-c&nbsp;or<br>
+50,000&nbsp;bugs&nbsp;play&nbsp;across&nbsp;your&nbsp;screen.<br>
+<br>
+&nbsp;&nbsp;You&nbsp;can&nbsp;limit&nbsp;the&nbsp;display&nbsp;from&nbsp;above&nbsp;a&nbsp;little&nbsp;with&nbsp;the&nbsp;command,&nbsp;where<br>
+"column"&nbsp;is&nbsp;the&nbsp;name&nbsp;of&nbsp;the&nbsp;column&nbsp;for&nbsp;which&nbsp;you&nbsp;wish&nbsp;to&nbsp;restrict&nbsp;information:<br>
+<br>
+mysql&#62;&nbsp;select&nbsp;*&nbsp;from&nbsp;table&nbsp;where&nbsp;(column&nbsp;=&nbsp;"some&nbsp;info");<br>
+<br>
+&nbsp;&nbsp;--&nbsp;or&nbsp;the&nbsp;reverse&nbsp;of&nbsp;this<br>
+<br>
+mysql&#62;&nbsp;select&nbsp;*&nbsp;from&nbsp;table&nbsp;where&nbsp;(column&nbsp;!=&nbsp;"some&nbsp;info");<br>
+<br>
+&nbsp;&nbsp;Let's&nbsp;take&nbsp;our&nbsp;example&nbsp;from&nbsp;the&nbsp;introduction,&nbsp;and&nbsp;assume&nbsp;you&nbsp;need&nbsp;to&nbsp;change<br>
+the&nbsp;word&nbsp;"verified"&nbsp;to&nbsp;"approved"&nbsp;in&nbsp;the&nbsp;resolution&nbsp;field.&nbsp;&nbsp;We&nbsp;know&nbsp;from&nbsp;the<br>
+above&nbsp;information&nbsp;that&nbsp;the&nbsp;resolution&nbsp;is&nbsp;likely&nbsp;to&nbsp;be&nbsp;stored&nbsp;in&nbsp;the&nbsp;"bugs"<br>
+table.&nbsp;Note&nbsp;we'll&nbsp;need&nbsp;to&nbsp;change&nbsp;a&nbsp;little&nbsp;perl&nbsp;code&nbsp;as&nbsp;well&nbsp;as&nbsp;this&nbsp;database<br>
+change,&nbsp;but&nbsp;I&nbsp;won't&nbsp;plunge&nbsp;into&nbsp;that&nbsp;in&nbsp;this&nbsp;document.&nbsp;Let's&nbsp;verify&nbsp;the<br>
+information&nbsp;is&nbsp;stored&nbsp;in&nbsp;the&nbsp;"bugs"&nbsp;table:<br>
+<br>
+mysql&#62;&nbsp;show&nbsp;columns&nbsp;from&nbsp;bugs<br>
+<br>
+&nbsp;&nbsp;(exceedingly&nbsp;long&nbsp;output&nbsp;truncated&nbsp;here)<br>
+|&nbsp;bug_status|&nbsp;enum('UNCONFIRMED','NEW','ASSIGNED','REOPENED','RESOLVED','VERIFIED','CLOSED')||MUL&nbsp;|&nbsp;UNCONFIRMED||<br>
+<br>
+&nbsp;&nbsp;Sorry&nbsp;about&nbsp;that&nbsp;long&nbsp;line.&nbsp;&nbsp;We&nbsp;see&nbsp;from&nbsp;this&nbsp;that&nbsp;the&nbsp;"bug&nbsp;status"&nbsp;column&nbsp;is<br>
+an&nbsp;"enum&nbsp;field",&nbsp;which&nbsp;is&nbsp;a&nbsp;MySQL&nbsp;peculiarity&nbsp;where&nbsp;a&nbsp;string&nbsp;type&nbsp;field&nbsp;can<br>
+only&nbsp;have&nbsp;certain&nbsp;types&nbsp;of&nbsp;entries.&nbsp;&nbsp;While&nbsp;I&nbsp;think&nbsp;this&nbsp;is&nbsp;very&nbsp;cool,&nbsp;it's&nbsp;not<br>
+standard&nbsp;SQL.&nbsp;&nbsp;Anyway,&nbsp;we&nbsp;need&nbsp;to&nbsp;add&nbsp;the&nbsp;possible&nbsp;enum&nbsp;field&nbsp;entry<br>
+'APPROVED'&nbsp;by&nbsp;altering&nbsp;the&nbsp;"bugs"&nbsp;table.<br>
+<br>
+mysql&#62;&nbsp;ALTER&nbsp;table&nbsp;bugs&nbsp;CHANGE&nbsp;bug_status&nbsp;bug_status<br>
+&nbsp;&nbsp;&nbsp;&nbsp;-&#62;&nbsp;enum("UNCONFIRMED",&nbsp;"NEW",&nbsp;"ASSIGNED",&nbsp;"REOPENED",&nbsp;"RESOLVED",<br>
+&nbsp;&nbsp;&nbsp;&nbsp;-&#62;&nbsp;"VERIFIED",&nbsp;"APPROVED",&nbsp;"CLOSED")&nbsp;not&nbsp;null;<br>
+<br>
+&nbsp;&nbsp;&nbsp;&nbsp;(note&nbsp;we&nbsp;can&nbsp;take&nbsp;three&nbsp;lines&nbsp;or&nbsp;more&nbsp;--&nbsp;whatever&nbsp;you&nbsp;put&nbsp;in&nbsp;before&nbsp;the<br>
+semicolon&nbsp;is&nbsp;evaluated&nbsp;as&nbsp;a&nbsp;single&nbsp;expression)<br>
+<br>
+Now&nbsp;if&nbsp;you&nbsp;do&nbsp;this:<br>
+<br>
+mysql&#62;&nbsp;show&nbsp;columns&nbsp;from&nbsp;bugs;<br>
+<br>
+&nbsp;&nbsp;you'll&nbsp;see&nbsp;that&nbsp;the&nbsp;bug_status&nbsp;field&nbsp;has&nbsp;an&nbsp;extra&nbsp;"APPROVED"&nbsp;enum&nbsp;that's<br>
+available!&nbsp;&nbsp;Cool&nbsp;thing,&nbsp;too,&nbsp;is&nbsp;that&nbsp;this&nbsp;is&nbsp;reflected&nbsp;on&nbsp;your&nbsp;query&nbsp;page&nbsp;as<br>
+well&nbsp;--&nbsp;you&nbsp;can&nbsp;query&nbsp;by&nbsp;the&nbsp;new&nbsp;status.&nbsp;&nbsp;But&nbsp;how's&nbsp;it&nbsp;fit&nbsp;into&nbsp;the&nbsp;existing<br>
+scheme&nbsp;of&nbsp;things?<br>
+&nbsp;&nbsp;Looks&nbsp;like&nbsp;you&nbsp;need&nbsp;to&nbsp;go&nbsp;back&nbsp;and&nbsp;look&nbsp;for&nbsp;instances&nbsp;of&nbsp;the&nbsp;word&nbsp;"verified"<br>
+in&nbsp;the&nbsp;perl&nbsp;code&nbsp;for&nbsp;Bugzilla&nbsp;--&nbsp;wherever&nbsp;you&nbsp;find&nbsp;"verified",&nbsp;change&nbsp;it&nbsp;to<br>
+"approved"&nbsp;and&nbsp;you're&nbsp;in&nbsp;business&nbsp;(make&nbsp;sure&nbsp;that's&nbsp;a&nbsp;case-insensitive&nbsp;search).<br>
+Although&nbsp;you&nbsp;can&nbsp;query&nbsp;by&nbsp;the&nbsp;enum&nbsp;field,&nbsp;you&nbsp;can't&nbsp;give&nbsp;something&nbsp;a&nbsp;status<br>
+of&nbsp;"APPROVED"&nbsp;until&nbsp;you&nbsp;make&nbsp;the&nbsp;perl&nbsp;changes.&nbsp;&nbsp;&nbsp;Note&nbsp;that&nbsp;this&nbsp;change&nbsp;I<br>
+mentioned&nbsp;can&nbsp;also&nbsp;be&nbsp;done&nbsp;by&nbsp;editing&nbsp;checksetup.pl,&nbsp;which&nbsp;automates&nbsp;a&nbsp;lot&nbsp;of<br>
+this.&nbsp;&nbsp;But&nbsp;you&nbsp;need&nbsp;to&nbsp;know&nbsp;this&nbsp;stuff&nbsp;anyway,&nbsp;right?<br>
+<br>
+&nbsp;&nbsp;I&nbsp;hope&nbsp;this&nbsp;database&nbsp;tutorial&nbsp;has&nbsp;been&nbsp;useful&nbsp;for&nbsp;you.&nbsp;&nbsp;If&nbsp;you&nbsp;have&nbsp;comments<br>
+to&nbsp;add,&nbsp;questions,&nbsp;concerns,&nbsp;etc.&nbsp;please&nbsp;direct&nbsp;them&nbsp;to<br>
+mbarnson@excitehome.net.&nbsp;&nbsp;Please&nbsp;direct&nbsp;flames&nbsp;to&nbsp;/dev/null&nbsp;:)&nbsp;&nbsp;Have&nbsp;a&nbsp;nice<br>
+day!<br>
+<br>
+<br>
+<br>
+===<br>
+LINKS<br>
+===<br>
+<br>
+Great&nbsp;MySQL&nbsp;tutorial&nbsp;site:<br>
+http://www.devshed.com/Server_Side/MySQL/<br>
+<br>
+	</P
+></DIV
+></DIV
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="dbschema.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="granttables.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Database Schema Chart</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="database.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>MySQL Permissions &#38; Grant Tables</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/dbschema.html

@@ -0,0 +1,156 @@
+<HTML
+><HEAD
+><TITLE
+>Database Schema Chart</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="The Bugzilla Database"
+HREF="database.html"><LINK
+REL="PREVIOUS"
+TITLE="The Bugzilla Database"
+HREF="database.html"><LINK
+REL="NEXT"
+TITLE="MySQL Bugzilla Database Introduction"
+HREF="dbdoc.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="database.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Appendix C. The Bugzilla Database</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="dbdoc.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="dbschema">C.1. Database Schema Chart</H1
+><P
+>&#13;      <DIV
+CLASS="mediaobject"
+><P
+><IMG
+SRC="../images/dbschema.jpg"><DIV
+CLASS="caption"
+><P
+>Bugzilla database relationships chart</P
+></DIV
+></P
+></DIV
+>
+    </P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="database.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="dbdoc.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>The Bugzilla Database</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="database.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>MySQL Bugzilla Database Introduction</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/disclaimer.html

@@ -0,0 +1,184 @@
+<HTML
+><HEAD
+><TITLE
+>Disclaimer</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="About This Guide"
+HREF="about.html"><LINK
+REL="PREVIOUS"
+TITLE="Copyright Information"
+HREF="copyright.html"><LINK
+REL="NEXT"
+TITLE="New Versions"
+HREF="newversions.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="copyright.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 1. About This Guide</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="newversions.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="disclaimer">1.3. Disclaimer</H1
+><P
+>&#13;      No liability for the contents of this document can be accepted.
+      Use the concepts, examples, and other content at your own risk.
+      As this is a new edition of this document, there may be errors
+      and inaccuracies that may damage your system.  Use of this
+      document may cause your girlfriend to leave you, your cats to
+      pee on your furniture and clothing, your computer to cease
+      functioning, your boss to fire you, and global thermonuclear
+      war.  Proceed with caution.
+    </P
+><P
+>&#13;      All copyrights are held by their respective owners, unless
+      specifically noted otherwise.  Use of a term in this document
+      should not be regarded as affecting the validity of any
+      trademark or service mark.
+    </P
+><P
+>&#13;      Naming of particular products or brands should not be seen as
+      endorsements, with the exception of the term "GNU/Linux".  We
+      wholeheartedly endorse the use of GNU/Linux in every situation
+      where it is appropriate.  It is an extremely versatile, stable,
+      and robust operating system that offers an ideal operating
+      environment for Bugzilla.
+    </P
+><P
+>&#13;      You are strongly recommended to make a backup of your system
+      before installing Bugzilla and at regular intervals thereafter.
+      If you implement any suggestion in this Guide, implement this one!
+    </P
+><P
+>&#13;      Although the Bugzilla development team has taken great care to
+      ensure that all easily-exploitable bugs or options are
+      documented or fixed in the code, security holes surely exist.
+      Great care should be taken both in the installation and usage of
+      this software. Carefully consider the implications of installing
+      other network services with Bugzilla.  The Bugzilla development
+      team members, Netscape Communications, America Online Inc., and
+      any affiliated developers or sponsors assume no liability for
+      your use of this product.  You have the source code to this
+      product, and are responsible for auditing it yourself to insure
+      your security needs are met.
+    </P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="copyright.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="newversions.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Copyright Information</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="about.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>New Versions</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/downloadlinks.html

@@ -0,0 +1,237 @@
+<HTML
+><HEAD
+><TITLE
+>Software Download Links</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="PREVIOUS"
+TITLE="The Bugzilla FAQ"
+HREF="faq.html"><LINK
+REL="NEXT"
+TITLE="The Bugzilla Database"
+HREF="database.html"></HEAD
+><BODY
+CLASS="appendix"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="faq.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+></TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="database.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="appendix"
+><H1
+><A
+NAME="downloadlinks">Appendix B. Software Download Links</H1
+><P
+>&#13;    All of these sites are current as of April, 2001.  Hopefully
+    they'll stay current for a while.
+  </P
+><P
+>&#13;    Apache Web Server: <A
+HREF="http://www.apache.org/"
+TARGET="_top"
+>http://www.apache.org</A
+>
+    Optional web server for Bugzilla, but recommended because of broad user base and support.
+  </P
+><P
+>&#13;    Bugzilla: <A
+HREF="http://www.mozilla.org/projects/bugzilla/"
+TARGET="_top"
+>&#13;      http://www.mozilla.org/projects/bugzilla/</A
+>
+  </P
+><P
+>&#13;    MySQL: <A
+HREF="http://www.mysql.com/"
+TARGET="_top"
+>http://www.mysql.com/</A
+>
+  </P
+><P
+>&#13;    Perl: <A
+HREF="http://www.perl.org"
+TARGET="_top"
+>http://www.perl.org/</A
+>
+  </P
+><P
+>&#13;    CPAN: <A
+HREF="http://www.cpan.org/"
+TARGET="_top"
+>http://www.cpan.org/</A
+>
+  </P
+><P
+>&#13;    DBI Perl module: 
+    <A
+HREF="http://www.cpan.org/modules/by-module/DBI/"
+TARGET="_top"
+>&#13;      http://www.cpan.org/modules/by-module/DBI/</A
+>
+  </P
+><P
+>&#13;    Data::Dumper module: 
+    <A
+HREF="http://www.cpan.org/modules/by-module/Data/"
+TARGET="_top"
+>&#13;      http://www.cpan.org/modules/by-module/Data/</A
+>
+  </P
+><P
+>&#13;    MySQL related Perl modules:
+    <A
+HREF="http://www.cpan.org/modules/by-module/Mysql/"
+TARGET="_top"
+>&#13;      http://www.cpan.org/modules/by-module/Mysql/</A
+>
+  </P
+><P
+>&#13;    TimeDate Perl module collection:
+    <A
+HREF="http://www.cpan.org/modules/by-module/Date/"
+TARGET="_top"
+>&#13;      http://www.cpan.org/modules/by-module/Date/</A
+>
+  </P
+><P
+>&#13;    GD Perl module:
+    <A
+HREF="http://www.cpan.org/modules/by-module/GD/"
+TARGET="_top"
+>&#13;      http://www.cpan.org/modules/by-module/GD/</A
+>
+    Alternately, you should be able to find the latest version of
+    GD at <A
+HREF="http://www.boutell.com/gd/"
+TARGET="_top"
+>http://www.boutell.com/gd/</A
+>
+  </P
+><P
+>&#13;    Chart::Base module:
+    <A
+HREF="http://www.cpan.org/modules/by-module/Chart/"
+TARGET="_top"
+>&#13;    http://www.cpan.org/modules/by-module/Chart/</A
+>
+  </P
+><P
+>&#13;    LinuxDoc Software: 
+    <A
+HREF="http://www.linuxdoc.org/"
+TARGET="_top"
+>http://www.linuxdoc.org/</A
+>
+    (for documentation maintenance)
+  </P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="faq.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="database.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>The Bugzilla FAQ</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+>&nbsp;</TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>The Bugzilla Database</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/errata.html

@@ -0,0 +1,279 @@
+<HTML
+><HEAD
+><TITLE
+>ERRATA</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="Installation"
+HREF="installation.html"><LINK
+REL="PREVIOUS"
+TITLE="Installation"
+HREF="installation.html"><LINK
+REL="NEXT"
+TITLE="Step-by-step Install"
+HREF="stepbystep.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="installation.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 3. Installation</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="stepbystep.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="errata">3.1. ERRATA</H1
+><P
+>Here are some miscellaneous notes about possible issues you
+      main run into when you begin your Bugzilla installation.
+      Reference platforms for Bugzilla installation are Redhat Linux
+      7.2, Linux-Mandrake 8.0, and Solaris 8.</P
+><P
+></P
+><TABLE
+BORDER="0"
+><TBODY
+><TR
+><TD
+>&#13;	If you are installing Bugzilla on S.u.S.e. Linux, or some
+	other distributions with <SPAN
+CLASS="QUOTE"
+>"paranoid"</SPAN
+> security
+	options, it is possible that the checksetup.pl script may fail
+	with the error: <SPAN
+CLASS="errorname"
+>cannot chdir(/var/spool/mqueue):
+	  Permission denied</SPAN
+> This is because your
+	<TT
+CLASS="filename"
+>/var/spool/mqueue</TT
+> directory has a mode of
+	<SPAN
+CLASS="QUOTE"
+>"drwx------"</SPAN
+>.  Type <B
+CLASS="command"
+>chmod 755
+	  <TT
+CLASS="filename"
+>/var/spool/mqueue</TT
+></B
+> as root to
+	fix this problem.
+      </TD
+></TR
+><TR
+><TD
+>&#13;	Bugzilla may be installed on Macintosh OS X (10), which is a
+	unix-based (BSD)  operating system. Everything required for
+	Bugzilla on OS X will install cleanly, but the optional GD
+	perl module which is used for bug charting requires some
+	additional setup for installation. Please see the  Mac OS X
+	installation section below for details
+      </TD
+></TR
+><TR
+><TD
+>&#13;	Release Notes for Bugzilla 2.16 are available at
+	<TT
+CLASS="filename"
+>docs/rel_notes.txt</TT
+> in your Bugzilla
+	source distribution.
+      </TD
+></TR
+><TR
+><TD
+>&#13;	  The preferred documentation for Bugzilla is available in
+	docs/, with a variety of document types available.  Please
+	refer to these documents when  installing, configuring, and
+	maintaining your Bugzilla installation.
+      </TD
+></TR
+></TBODY
+></TABLE
+><P
+></P
+><DIV
+CLASS="warning"
+><P
+></P
+><TABLE
+CLASS="warning"
+WIDTH="100%"
+BORDER="0"
+><TR
+><TD
+WIDTH="25"
+ALIGN="CENTER"
+VALIGN="TOP"
+><IMG
+SRC="../images/warning.gif"
+HSPACE="5"
+ALT="Warning"></TD
+><TD
+ALIGN="LEFT"
+VALIGN="TOP"
+><P
+>&#13;	Bugzilla is not a package where you can just plop it in a directory,
+	twiddle a few things, and you're off.  Installing Bugzilla assumes you
+	know your variant of UNIX or Microsoft Windows well, are familiar with the
+	command line, and are comfortable compiling and installing a plethora
+	of third-party utilities.  To install Bugzilla on Win32 requires
+	fair Perl proficiency, and if you use a webserver other than Apache you
+	should be intimately familiar with the security mechanisms and CGI
+	environment thereof.
+      </P
+></TD
+></TR
+></TABLE
+></DIV
+><DIV
+CLASS="warning"
+><P
+></P
+><TABLE
+CLASS="warning"
+WIDTH="100%"
+BORDER="0"
+><TR
+><TD
+WIDTH="25"
+ALIGN="CENTER"
+VALIGN="TOP"
+><IMG
+SRC="../images/warning.gif"
+HSPACE="5"
+ALT="Warning"></TD
+><TD
+ALIGN="LEFT"
+VALIGN="TOP"
+><P
+>&#13;	Bugzilla has not undergone a complete security review. Security holes
+	may exist in the code.  Great care should be taken both in the installation
+	and usage of this software.  Carefully consider the implications of
+	installing other network services with Bugzilla.
+      </P
+></TD
+></TR
+></TABLE
+></DIV
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="installation.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="stepbystep.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Installation</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="installation.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Step-by-step Install</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/extraconfig.html

@@ -0,0 +1,390 @@
+<HTML
+><HEAD
+><TITLE
+>Optional Additional Configuration</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="Installation"
+HREF="installation.html"><LINK
+REL="PREVIOUS"
+TITLE="Step-by-step Install"
+HREF="stepbystep.html"><LINK
+REL="NEXT"
+TITLE="Win32 Installation Notes"
+HREF="win32.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="stepbystep.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 4. Installation</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="win32.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="extraconfig">4.2. Optional Additional Configuration</H1
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="AEN836">4.2.1. Dependency Charts</H2
+><P
+>As well as the text-based dependency graphs, Bugzilla also
+      supports dependency graphing, using a package called 'dot'.
+      Exactly how this works is controlled by the 'webdotbase' parameter.
+      </P
+><P
+>(To be written...</P
+></DIV
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="AEN840">4.2.2. Bug Graphs</H2
+><P
+>As long as you installed the GD and Graph::Base Perl modules you
+      might as well turn on the nifty Bugzilla bug reporting graphs.</P
+><P
+>Add a cron entry like this to run 
+      <TT
+CLASS="filename"
+>collectstats.pl</TT
+> 
+      daily at 5 after midnight: 
+      <P
+></P
+><TABLE
+BORDER="0"
+><TBODY
+><TR
+><TD
+>&#13;          <TT
+CLASS="computeroutput"
+>&#13;            <TT
+CLASS="prompt"
+>bash#</TT
+>
+
+            <B
+CLASS="command"
+>crontab -e</B
+>
+          </TT
+>
+        </TD
+></TR
+><TR
+><TD
+>&#13;          <TT
+CLASS="computeroutput"
+>5 0 * * * cd &#60;your-bugzilla-directory&#62; ;
+          ./collectstats.pl</TT
+>
+        </TD
+></TR
+></TBODY
+></TABLE
+><P
+></P
+>
+      </P
+><P
+>After two days have passed you'll be able to view bug graphs from
+      the Bug Reports page.</P
+></DIV
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="AEN853">4.2.3. The Whining Cron</H2
+><P
+>By now you have a fully functional Bugzilla, but what good are
+      bugs if they're not annoying? To help make those bugs more annoying you
+      can set up Bugzilla's automatic whining system to complain at engineers
+      which leave their bugs in the NEW state without triaging them.
+      </P
+><P
+>&#13;      This can be done by
+      adding the following command as a daily crontab entry (for help on that
+      see that crontab man page): 
+      <P
+></P
+><TABLE
+BORDER="0"
+><TBODY
+><TR
+><TD
+>&#13;          <TT
+CLASS="computeroutput"
+>&#13;            <B
+CLASS="command"
+>cd &#60;your-bugzilla-directory&#62; ;
+            ./whineatnews.pl</B
+>
+          </TT
+>
+        </TD
+></TR
+></TBODY
+></TABLE
+><P
+></P
+>
+      </P
+><DIV
+CLASS="tip"
+><P
+></P
+><TABLE
+CLASS="tip"
+WIDTH="100%"
+BORDER="0"
+><TR
+><TD
+WIDTH="25"
+ALIGN="CENTER"
+VALIGN="TOP"
+><IMG
+SRC="../images/tip.gif"
+HSPACE="5"
+ALT="Tip"></TD
+><TD
+ALIGN="LEFT"
+VALIGN="TOP"
+><P
+>Depending on your system, crontab may have several manpages.
+        The following command should lead you to the most useful page for
+        this purpose: 
+        <TABLE
+BORDER="0"
+BGCOLOR="#E0E0E0"
+WIDTH="100%"
+><TR
+><TD
+><FONT
+COLOR="#000000"
+><PRE
+CLASS="programlisting"
+>man 5 crontab</PRE
+></FONT
+></TD
+></TR
+></TABLE
+>
+        </P
+></TD
+></TR
+></TABLE
+></DIV
+></DIV
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="bzldap">4.2.4. LDAP Authentication</H2
+><P
+>&#13;        <DIV
+CLASS="warning"
+><P
+></P
+><TABLE
+CLASS="warning"
+WIDTH="100%"
+BORDER="0"
+><TR
+><TD
+WIDTH="25"
+ALIGN="CENTER"
+VALIGN="TOP"
+><IMG
+SRC="../images/warning.gif"
+HSPACE="5"
+ALT="Warning"></TD
+><TD
+ALIGN="LEFT"
+VALIGN="TOP"
+><P
+>This information on using the LDAP
+            authentication options with Bugzilla is old, and the authors do
+            not know of anyone who has tested it. Approach with caution.
+          </P
+></TD
+></TR
+></TABLE
+></DIV
+>
+      </P
+><P
+>&#13;      The existing authentication
+      scheme for Bugzilla uses email addresses as the primary user ID, and a
+      password to authenticate that user. All places within Bugzilla where
+      you need to deal with user ID (e.g assigning a bug) use the email
+      address. The LDAP authentication builds on top of this scheme, rather
+      than replacing it. The initial log in is done with a username and
+      password for the LDAP directory. This then fetches the email address
+      from LDAP and authenticates seamlessly in the standard Bugzilla
+      authentication scheme using this email address. If an account for this
+      address already exists in your Bugzilla system, it will log in to that
+      account. If no account for that email address exists, one is created at
+      the time of login. (In this case, Bugzilla will attempt to use the
+      "displayName" or "cn" attribute to determine the user's full name.)
+      After authentication, all other user-related tasks are still handled by
+      email address, not LDAP username. You still assign bugs by email
+      address, query on users by email address, etc.
+      </P
+><P
+>Using LDAP for Bugzilla authentication requires the 
+      Mozilla::LDAP (aka PerLDAP) Perl module. The
+      Mozilla::LDAP module in turn requires Netscape's Directory SDK for C.
+      After you have installed the SDK, then install the PerLDAP module.
+      Mozilla::LDAP and the Directory SDK for C are both 
+      <A
+HREF="http://www.mozilla.org/directory/"
+TARGET="_top"
+>available for
+      download</A
+> from mozilla.org. 
+      </P
+><P
+>&#13;      Set the Param 'useLDAP' to "On" **only** if you will be using an LDAP
+      directory for
+      authentication. Be very careful when setting up this parameter; if you
+      set LDAP authentication, but do not have a valid LDAP directory set up,
+      you will not be able to log back in to Bugzilla once you log out. (If
+      this happens, you can get back in by manually editing the data/params
+      file, and setting useLDAP back to 0.)
+      </P
+><P
+>If using LDAP, you must set the
+      three additional parameters: Set LDAPserver to the name (and optionally
+      port) of your LDAP server. If no port is specified, it defaults to the
+      default port of 389. (e.g "ldap.mycompany.com" or
+      "ldap.mycompany.com:1234") Set LDAPBaseDN to the base DN for searching
+      for users in your LDAP directory. (e.g. "ou=People,o=MyCompany") uids
+      must be unique under the DN specified here. Set LDAPmailattribute to
+      the name of the attribute in your LDAP directory which contains the
+      primary email address. On most directory servers available, this is
+      "mail", but you may need to change this.
+      </P
+></DIV
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="stepbystep.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="win32.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Step-by-step Install</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="installation.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Win32 Installation Notes</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/feedback.html

@@ -0,0 +1,161 @@
+<HTML
+><HEAD
+><TITLE
+>Feedback</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="About This Guide"
+HREF="about.html"><LINK
+REL="PREVIOUS"
+TITLE="Contributors"
+HREF="contributors.html"><LINK
+REL="NEXT"
+TITLE="Translations"
+HREF="translations.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="contributors.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 1. About This Guide</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="translations.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="feedback">1.7. Feedback</H1
+><P
+>&#13;      I welcome feedback on this document.  Without your submissions
+      and input, this Guide cannot continue to exist.  Please mail
+      additions, comments, criticisms, etc. to
+      <TT
+CLASS="email"
+>&#60;<A
+HREF="mailto:barnboy@trilobyte.net"
+>barnboy@trilobyte.net</A
+>&#62;</TT
+>.  Please send flames to
+      <TT
+CLASS="email"
+>&#60;<A
+HREF="mailto:devnull@localhost"
+>devnull@localhost</A
+>&#62;</TT
+>
+    </P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="contributors.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="translations.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>Contributors</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="about.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Translations</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/geninstall.html

@@ -0,0 +1,489 @@
+<HTML
+><HEAD
+><TITLE
+>Installation General Notes</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="Installation"
+HREF="installation.html"><LINK
+REL="PREVIOUS"
+TITLE="BSD Installation Notes"
+HREF="bsdinstall.html"><LINK
+REL="NEXT"
+TITLE="Win32 Installation Notes"
+HREF="win32.html"></HEAD
+><BODY
+CLASS="section"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="bsdinstall.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Chapter 3. Installation</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="win32.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="section"
+><H1
+CLASS="section"
+><A
+NAME="geninstall">3.5. Installation General Notes</H1
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="AEN874">3.5.1. Modifying Your Running System</H2
+><P
+>&#13;	Bugzilla optimizes database lookups by storing all relatively static
+	information in the versioncache file, located in the data/ subdirectory
+	under your installation directory.
+      </P
+><P
+>&#13;	If you make a change to the structural data in your database
+	(the versions table for example), or to the
+	<SPAN
+CLASS="QUOTE"
+>"constants"</SPAN
+> encoded in defparams.pl, you will
+	need to remove the cached content from the data directory
+	(by doing a <SPAN
+CLASS="QUOTE"
+>"rm data/versioncache"</SPAN
+>), or your
+	changes won't show up.
+      </P
+><P
+>&#13;	That file gets automatically regenerated whenever it's more than an
+	hour old, so Bugzilla will eventually notice your changes by itself, but
+	generally you want it to notice right away, so that you can test things.
+      </P
+></DIV
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="AEN881">3.5.2. Upgrading From Previous Versions</H2
+><P
+>&#13;  A plain Bugzilla is fairly easy to upgrade from one version to a newer one.
+  However, things get a bit more complicated if you've made changes to 
+  Bugzilla's code. In this case, you may have to re-make or reapply those
+  changes.
+  It is recommended that you take a backup of your database and your entire
+  Bugzilla installation before attempting an upgrade. You can upgrade a 'clean'
+  installation by untarring a new tarball over the old installation. If you
+  are upgrading from 2.12 or later, you can type <TT
+CLASS="filename"
+>cvs -z3 
+  update</TT
+>, and resolve conflicts if there are any.   
+      </P
+><P
+>&#13;	Because the developers of Bugzilla are constantly adding new tables, columns
+  and fields, you'll probably get SQL errors if you just update the code and
+  attempt to use Bugzilla. Always run the checksetup.pl script whenever
+	you upgrade your installation. 
+      </P
+><P
+>&#13;	If you are running Bugzilla version 2.8 or lower, and wish to upgrade to
+	the latest version, please consult the file, "UPGRADING-pre-2.8" in the
+	Bugzilla root directory after untarring the archive.
+      </P
+></DIV
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="htaccess">3.5.3. <TT
+CLASS="filename"
+>.htaccess</TT
+> files and security</H2
+><P
+>&#13;	To enhance the security of your Bugzilla installation,
+	Bugzilla  will generate
+	<I
+CLASS="glossterm"
+><TT
+CLASS="filename"
+>.htaccess</TT
+></I
+> files
+	which the Apache webserver can use to restrict  access to
+	the bugzilla data files. The checksetup script  will
+	generate the <TT
+CLASS="filename"
+>.htaccess</TT
+> files. These .htaccess files
+  will not work with Apache 1.2.x - but this has security holes, so you
+  shouldn't be using it anyway.
+	
+	<DIV
+CLASS="note"
+><P
+></P
+><TABLE
+CLASS="note"
+WIDTH="100%"
+BORDER="0"
+><TR
+><TD
+WIDTH="25"
+ALIGN="CENTER"
+VALIGN="TOP"
+><IMG
+SRC="../images/note.gif"
+HSPACE="5"
+ALT="Note"></TD
+><TD
+ALIGN="LEFT"
+VALIGN="TOP"
+><P
+>&#13;	    If you are using an alternate provider of
+	    <SPAN
+CLASS="productname"
+>webdot</SPAN
+> services for graphing
+	    (as described when viewing
+	    <TT
+CLASS="filename"
+>editparams.cgi</TT
+> in your web
+	    browser), you will need to change  the ip address in
+	    <TT
+CLASS="filename"
+>data/webdot/.htaccess</TT
+> to the ip
+	    address of the webdot server that  you are using. 
+	  </P
+></TD
+></TR
+></TABLE
+></DIV
+>
+	
+      </P
+><P
+>&#13;	The default .htaccess file may not provide adequate access
+	restrictions, depending on your web server configuration.
+	Be sure to check the &#60;Directory&#62; entries for your
+	Bugzilla directory so that the <TT
+CLASS="filename"
+>.htaccess</TT
+>
+	file is allowed to override web server defaults.  For instance,
+	let's assume your installation of Bugzilla is installed to 
+	<TT
+CLASS="filename"
+>/usr/local/bugzilla</TT
+>.  You should have
+	this &#60;Directory&#62; entry in your <TT
+CLASS="filename"
+>httpd.conf</TT
+>
+	file:
+      </P
+><P
+>&#13;	<TABLE
+BORDER="0"
+BGCOLOR="#E0E0E0"
+WIDTH="100%"
+><TR
+><TD
+><FONT
+COLOR="#000000"
+><PRE
+CLASS="programlisting"
+>&#13;
+&#60;Directory /usr/local/bugzilla/&#62;
+  Options +FollowSymLinks +Indexes +Includes +ExecCGI
+  AllowOverride All
+&#60;/Directory&#62;
+
+	</PRE
+></FONT
+></TD
+></TR
+></TABLE
+>
+      </P
+><P
+>&#13;	The important part above is <SPAN
+CLASS="QUOTE"
+>"AllowOverride All"</SPAN
+>.
+	Without that, the <TT
+CLASS="filename"
+>.htaccess</TT
+> file created by 
+	<TT
+CLASS="filename"
+>checksetup.pl</TT
+> will not have sufficient
+	permissions to protect your Bugzilla installation.
+      </P
+><P
+>&#13;	If you are using Internet Information Server or other web
+	server which does not observe <TT
+CLASS="filename"
+>.htaccess</TT
+>
+	conventions, you can disable their creation by editing
+	<TT
+CLASS="filename"
+>localconfig</TT
+> and setting the
+	<TT
+CLASS="varname"
+>$create_htaccess</TT
+> variable to
+	<TT
+CLASS="parameter"
+><I
+>0</I
+></TT
+>.
+      </P
+></DIV
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="mod-throttle">3.5.4. <TT
+CLASS="filename"
+>mod_throttle</TT
+> and Security</H2
+><P
+>&#13;	It is possible for a user, by mistake or on purpose, to access
+	the database many times in a row which can result in very slow
+	access speeds for other users.  If your Bugzilla installation
+	is experiencing this problem , you may install  the Apache
+	module <TT
+CLASS="filename"
+>mod_throttle</TT
+> which can limit
+	connections by ip-address. You may download this module at
+	<A
+HREF="http://www.snert.com/Software/Throttle/"
+TARGET="_top"
+>http://www.snert.com/Software/Throttle/</A
+>. Follow the instructions to install into your Apache install.  <EM
+>This module only functions with the Apache web server!</EM
+>. You may use the <B
+CLASS="command"
+>ThrottleClientIP</B
+> command provided by this module  to accomplish this goal. See the <A
+HREF="http://www.snert.com/Software/Throttle/"
+TARGET="_top"
+>Module Instructions</A
+> for more  information. </P
+></DIV
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="content-type">3.5.5. Preventing untrusted Bugzilla content from executing malicious Javascript code</H2
+><P
+>It is possible for a Bugzilla to execute malicious
+	Javascript code.  Due to internationalization concerns, we are
+	unable to incorporate the code changes necessary to fulfill
+	the CERT advisory requirements mentioned in <A
+HREF="http://www.cet.org/tech_tips/malicious_code_mitigation.html/#3"
+TARGET="_top"
+>http://www.cet.org/tech_tips/malicious_code_mitigation.html/#3</A
+>.  Executing the following code snippet from a UNIX command shell will rectify the problem if your Bugzilla installation is intended for an English-speaking audience.  As always, be sure your Bugzilla installation has a good backup before making changes, and I recommend you understand what the script is doing before executing it. </P
+><P
+><TABLE
+BORDER="0"
+BGCOLOR="#E0E0E0"
+WIDTH="100%"
+><TR
+><TD
+><FONT
+COLOR="#000000"
+><PRE
+CLASS="programlisting"
+>&#13;bash# cd $BUGZILLA_HOME; for i in `ls *.cgi`; \
+	  do cat $i | sed 's/Content-type\: text\/html/Content-Type: text\/html\; charset=ISO-8859-1/' &#62;$i.tmp; \
+	  mv $i.tmp $i; done
+	</PRE
+></FONT
+></TD
+></TR
+></TABLE
+></P
+><P
+>&#13;	All this one-liner command does is search for all instances of
+	<SPAN
+CLASS="QUOTE"
+>"Content-type: text/html"</SPAN
+> and replaces it with
+	<SPAN
+CLASS="QUOTE"
+>"Content-Type: text/html; charset=ISO-8859-1"</SPAN
+>.
+	This specification prevents possible Javascript attacks on the
+	browser, and is suggested for all English-speaking sites.  For
+	non-english-speaking Bugzilla sites, I suggest changing
+	<SPAN
+CLASS="QUOTE"
+>"ISO-8859-1"</SPAN
+>, above, to <SPAN
+CLASS="QUOTE"
+>"UTF-8"</SPAN
+>.
+      </P
+></DIV
+><DIV
+CLASS="section"
+><H2
+CLASS="section"
+><A
+NAME="unixhistory">3.5.6. UNIX Installation Instructions History</H2
+><P
+>&#13;	This document was originally adapted from the Bonsai
+	installation instructions by Terry Weissman
+	&#60;terry@mozilla.org&#62;.
+      </P
+><P
+>&#13;	The February 25, 1999 re-write of this page was done by Ry4an
+	Brase &#60;ry4an@ry4an.org&#62;, with some edits by Terry
+	Weissman, Bryce Nesbitt, Martin Pool, &#38; Dan Mosedale (But
+	don't send bug reports to them; report them using bugzilla, at <A
+HREF="http://bugzilla.mozilla.org/enter_bug.cgi?product=Bugzilla"
+TARGET="_top"
+>http://bugzilla.mozilla.org/enter_bug.cgi?product=Bugzilla</A
+> ).
+      </P
+><P
+>&#13;	This document was heavily modified again Wednesday, March 07
+	2001 to reflect changes for Bugzilla 2.12 release by Matthew
+	P. Barnson.  The securing MySQL section should be changed to
+	become standard procedure for Bugzilla installations.
+      </P
+><P
+>&#13;	Finally, the README in its entirety was marked up in SGML and
+	included into the Guide on April 24, 2001 by Matt Barnson.
+	Since that time, it's undergone extensive modification as
+	Bugzilla grew.
+      </P
+><P
+>&#13;	Comments from people using this Guide for the first time are
+	particularly welcome.
+      </P
+></DIV
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="bsdinstall.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="win32.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>BSD Installation Notes</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="installation.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>Win32 Installation Notes</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>

mozilla/webtools/bugzilla/docs/html/gfdl-0.html

@@ -0,0 +1,165 @@
+<HTML
+><HEAD
+><TITLE
+>PREAMBLE</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
+"><LINK
+REL="HOME"
+TITLE="The Bugzilla Guide"
+HREF="index.html"><LINK
+REL="UP"
+TITLE="GNU Free Documentation License"
+HREF="gfdl.html"><LINK
+REL="PREVIOUS"
+TITLE="GNU Free Documentation License"
+HREF="gfdl.html"><LINK
+REL="NEXT"
+TITLE="APPLICABILITY AND DEFINITIONS"
+HREF="gfdl-1.html"></HEAD
+><BODY
+CLASS="sect1"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><DIV
+CLASS="NAVHEADER"
+><TABLE
+SUMMARY="Header navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TH
+COLSPAN="3"
+ALIGN="center"
+>The Bugzilla Guide</TH
+></TR
+><TR
+><TD
+WIDTH="10%"
+ALIGN="left"
+VALIGN="bottom"
+><A
+HREF="gfdl.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="80%"
+ALIGN="center"
+VALIGN="bottom"
+>Appendix E. GNU Free Documentation License</TD
+><TD
+WIDTH="10%"
+ALIGN="right"
+VALIGN="bottom"
+><A
+HREF="gfdl-1.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+></TABLE
+><HR
+ALIGN="LEFT"
+WIDTH="100%"></DIV
+><DIV
+CLASS="sect1"
+><H1
+CLASS="sect1"
+><A
+NAME="gfdl-0">0. PREAMBLE</H1
+><P
+>The purpose of this License is to make a manual, textbook,
+    or other written document "free" in the sense of freedom: to
+    assure everyone the effective freedom to copy and redistribute it,
+    with or without modifying it, either commercially or
+    noncommercially.  Secondarily, this License preserves for the
+    author and publisher a way to get credit for their work, while not
+    being considered responsible for modifications made by
+    others.</P
+><P
+>This License is a kind of "copyleft", which means that
+    derivative works of the document must themselves be free in the
+    same sense.  It complements the GNU General Public License, which
+    is a copyleft license designed for free software.</P
+><P
+>We have designed this License in order to use it for manuals
+    for free software, because free software needs free documentation:
+    a free program should come with manuals providing the same
+    freedoms that the software does.  But this License is not limited
+    to software manuals; it can be used for any textual work,
+    regardless of subject matter or whether it is published as a
+    printed book.  We recommend this License principally for works
+    whose purpose is instruction or reference.</P
+></DIV
+><DIV
+CLASS="NAVFOOTER"
+><HR
+ALIGN="LEFT"
+WIDTH="100%"><TABLE
+SUMMARY="Footer navigation table"
+WIDTH="100%"
+BORDER="0"
+CELLPADDING="0"
+CELLSPACING="0"
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+><A
+HREF="gfdl.html"
+ACCESSKEY="P"
+>Prev</A
+></TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="index.html"
+ACCESSKEY="H"
+>Home</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+><A
+HREF="gfdl-1.html"
+ACCESSKEY="N"
+>Next</A
+></TD
+></TR
+><TR
+><TD
+WIDTH="33%"
+ALIGN="left"
+VALIGN="top"
+>GNU Free Documentation License</TD
+><TD
+WIDTH="34%"
+ALIGN="center"
+VALIGN="top"
+><A
+HREF="gfdl.html"
+ACCESSKEY="U"
+>Up</A
+></TD
+><TD
+WIDTH="33%"
+ALIGN="right"
+VALIGN="top"
+>APPLICABILITY AND DEFINITIONS</TD
+></TR
+></TABLE
+></DIV
+></BODY
+></HTML
+>