Implement breakpointing a given line.

git-svn-id: svn://10.0.0.236/branches/EXP_DEBUGGER@76282 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/build/mac/IDE_Options.h

@@ -1,132 +0,0 @@
-/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: NPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Netscape Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License at
- * http://www.mozilla.org/NPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is 
- * Netscape Communications Corporation.
- * Portions created by the Initial Developer are Copyright (C) 1998
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the NPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the NPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-/*
-
-	This file overrides all option settings in the IDE.  It is an attempt to allow all builds
-	to have the same options.
-
-	Note: We can't use ConditionalMacros.h in this file because it will conflict with 
-	the PowerPlant precompiled headers.
-
-*/
-
-	/* warning pragmas */
-#pragma warn_hidevirtual 		on
-#pragma warn_emptydecl 			on
-#pragma warn_unusedvar 			on
-#pragma warn_extracomma 		on
-#pragma warn_illpragma 			on
-#pragma warn_possunwant 		on
-#pragma warn_unusedarg 			off		/* turned off to reduce warnings */
-
-#pragma check_header_flags 		on
-
-	/* Language features that must be the same across libraries... */
-#pragma enumsalwaysint			on
-#pragma unsigned_char			off
-#pragma exceptions				on
-#pragma bool 					on
-#pragma wchar_type              on
-#pragma RTTI                    on
-
-
-	/* Save as much space as possible with strings... */
-#pragma pool_strings				on
-#pragma dont_reuse_strings			off
-
-#pragma options align=native
-#pragma sym 						on				/* Takes no memory.  OK in non-debug. */
-
-
-
-#ifdef powerc /* ...generating PowerPC */
-	#pragma toc_data 				on
-	#pragma fp_contract 			on
-	#pragma readonly_strings 		on
-
-	#ifdef DEBUG
-		#pragma profile 		off							/* Turn this on to profile the application. */
-																				/* Look for more details about profiling in nsMacMessagePump.cpp.  */
-		#pragma traceback 			on
-		#pragma global_optimizer 	off
-		#pragma scheduling 			off
-		#pragma peephole 			off
-		#pragma optimize_for_size 	off
-	#else
-		
-		#if TARGET_CARBON
-			#pragma traceback		on					/* should always be ON for Carbon builds */
-		#else
-			#pragma traceback		off					/* leave on until the final release, so MacsBug logs are interpretable */
-		#endif
-		
-		#pragma global_optimizer 	on
-		#pragma optimization_level 	4
-		#pragma scheduling 			603
-		#pragma peephole 			on
-		#pragma optimize_for_size	on
-
-    #pragma opt_strength_reduction on
-    #pragma opt_propagation on
-    #pragma opt_loop_invariants on
-    #pragma opt_lifetimes on
-    #pragma opt_dead_code on
-    #pragma opt_dead_assignments on
-    #pragma opt_common_subs on
-	#endif
-
-#else /* ...generating 68k */
-	#pragma code68020 			on
-	#pragma code68881 			off
-
-		/* Far everything... */
-	#pragma far_code
-	#pragma far_data 			on
-	#pragma far_strings 		on
-	#pragma far_vtables 		on
-
-	#pragma fourbyteints		on	/* 4-byte ints */
-	#pragma IEEEdoubles			on	/* 8-byte doubles (as required by Java and NSPR) */
-
-	#ifdef DEBUG
-		#pragma macsbug 		on
-		#pragma oldstyle_symbols off
-	#else
-		#pragma macsbug 		off
-	#endif
-#endif

mozilla/build/mac/MANIFEST

@@ -1,5 +0,0 @@
-#
-# This is a list of local files which get copied to the mozilla:dist directory
-#
-
-IDE_Options.h

mozilla/build/mac/NSCrossProductDefines.h

@@ -1,59 +0,0 @@
-/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: NPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Netscape Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License at
- * http://www.mozilla.org/NPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is mozilla.org code.
- *
- * The Initial Developer of the Original Code is 
- * Netscape Communications Corporation.
- * Portions created by the Initial Developer are Copyright (C) 1998
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the NPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the NPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-#error "DonÕt use me!"
-
-#define OLDROUTINELOCATIONS 0
-#define XP_MAC 1
-#define NSPR20 1
-#define _NO_FAST_STRING_INLINES_ 1
-#define HAVE_BOOLEAN 1
-#define NETSCAPE 1
-#define OTUNIXERRORS 1		/* We want OpenTransport error codes */
-
-#define OJI 1
-
-/*
-	This compiles in heap dumping utilities and other good stuff
- for developers -- maybe we only want it in for a special SDK
- nspr/java runtime(?):
-*/
-#define DEVELOPER_DEBUG 1
-
-#define	MAX(_a,_b)	((_a) < (_b) ? (_b) : (_a))
-#define	MIN(_a,_b)	((_a) < (_b) ? (_a) : (_b))

mozilla/build/mac/build_scripts/BuildMozilla.pl

@@ -1,80 +0,0 @@
-#!perl
-
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#   Simon Fraser <sfraser@netscape.com>
-#
-
-require 5.004;
-
-use strict;
-
-use Cwd;
-use Moz::BuildUtils;
-use Moz::BuildCore;
-
-#-------------------------------------------------------------
-# Where have the build options gone?
-# 
-# The various build flags have been centralized into one place. 
-# The master list of options is in MozBuildFlags.txt. However, 
-# you should never need to edit that file, or this one.
-# 
-# To customize what gets built, or where to start the build, 
-# edit the $prefs_file_name file in
-# System Folder:Preferences:Mozilla build prefs:
-# Documentation is provided in that file.
-#-------------------------------------------------------------
-
-my($prefs_file_name) = "Mozilla opt build prefs";
-my($config_header_file_name) = ":mozilla:config:mac:DefinesOptions.h";
-
-#-------------------------------------------------------------
-# hashes to hold build options
-#-------------------------------------------------------------
-my(%build);
-my(%options);
-my(%filepaths);
-my(%optiondefines);
-
-# Hash of input files for this build. Eventually, there will be
-# input files for manifests, and projects too.
-my(%inputfiles) = (
-  "buildflags",     "MozillaBuildFlags.txt",
-  "checkoutdata",   "MozillaCheckoutList.txt",
-  "buildprogress",  "¥ Mozilla opt progress",
-  "buildmodule",    "MozillaBuildList.pm",
-  "checkouttime",   "Mozilla last checkout"
-);
-#-------------------------------------------------------------
-# end build hashes
-#-------------------------------------------------------------
-
-# set the build root directory, which is the the dir above mozilla
-SetupBuildRootDir(":mozilla:build:mac:build_scripts");
-
-# Set up all the flags on $main::, like DEBUG, CARBON etc.
-# Override the defaults using the preferences files.
-SetupDefaultBuildOptions(0, ":mozilla:dist:viewer:", $config_header_file_name);
-
-my($do_checkout)    = 0;
-my($do_build)       = 1;
-
-RunBuild($do_checkout, $do_build, \%inputfiles, $prefs_file_name);

mozilla/build/mac/build_scripts/BuildMozillaDebug.pl

@@ -1,80 +0,0 @@
-#!perl
-
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#   Simon Fraser <sfraser@netscape.com>
-#
-
-require 5.004;
-
-use strict;
-
-use Cwd;
-use Moz::BuildUtils;
-use Moz::BuildCore;
-
-#-------------------------------------------------------------
-# Where have the build options gone?
-# 
-# The various build flags have been centralized into one place. 
-# The master list of options is in MozBuildFlags.txt. However, 
-# you should never need to edit that file, or this one.
-# 
-# To customize what gets built, or where to start the build, 
-# edit the $prefs_file_name file in
-# System Folder:Preferences:Mozilla build prefs:
-# Documentation is provided in that file.
-#-------------------------------------------------------------
-
-my($prefs_file_name) = "Mozilla debug build prefs";
-my($config_header_file_name) = ":mozilla:config:mac:DefinesOptionsDebug.h";
-
-#-------------------------------------------------------------
-# hashes to hold build options
-#-------------------------------------------------------------
-my(%build);
-my(%options);
-my(%filepaths);
-my(%optiondefines);
-
-# Hash of input files for this build. Eventually, there will be
-# input files for manifests, and projects too.
-my(%inputfiles) = (
-  "buildflags",     "MozillaBuildFlags.txt",
-  "checkoutdata",   "MozillaCheckoutList.txt",
-  "buildprogress",  "¥ Mozilla debug progress",
-  "buildmodule",    "MozillaBuildList.pm",
-  "checkouttime",   "Mozilla last checkout"
-);
-#-------------------------------------------------------------
-# end build hashes
-#-------------------------------------------------------------
-
-# set the build root directory, which is the the dir above mozilla
-SetupBuildRootDir(":mozilla:build:mac:build_scripts");
-
-# Set up all the flags on $main::, like DEBUG, CARBON etc.
-# Override the defaults using the preferences files.
-SetupDefaultBuildOptions(1, ":mozilla:dist:viewer_debug:", $config_header_file_name);
-
-my($do_pull)        = 0;    # overridden by flags and prefs
-my($do_build)       = 1;
-
-RunBuild($do_pull, $do_build, \%inputfiles, $prefs_file_name);

mozilla/build/mac/build_scripts/Moz/BuildCore.pm

@@ -1,595 +0,0 @@
-#!perl -w
-package Moz::BuildCore;
-
-require 5.004;
-require Exporter;
-
-use strict;
-use vars qw( @ISA @EXPORT );
-
-# perl includes
-use Cwd;
-use POSIX;
-use Time::Local;
-use File::Basename;
-use LWP::Simple;
-
-# homegrown
-use Moz::Moz;
-use Moz::Jar;
-use Moz::BuildFlags;
-use Moz::BuildUtils;
-use Moz::CodeWarriorLib;
-
-# use MozillaBuildList;   # eventually, this should go away, and be replaced by data input
-
-
-@ISA        = qw(Exporter);
-@EXPORT     = qw(
-                    RunBuild
-                );
-
-
-#//--------------------------------------------------------------------------------------------------
-#// DoPrebuildCheck
-#//
-#// Check the build tools etc before running the build.
-#//--------------------------------------------------------------------------------------------------
-sub DoPrebuildCheck()
-{
-    SanityCheckBuildOptions();
-
-    # launch codewarrior and persist its location. Have to call this before first
-    # call to getCodeWarriorPath().
-    my($ide_path_file) = $main::filepaths{"idepath"};
-    $ide_path_file = full_path_to($ide_path_file);
-    LaunchCodeWarrior($ide_path_file);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// SanityCheckBuildOptions
-#//--------------------------------------------------------------------------------------------------
-sub SanityCheckBuildOptions()
-{
-    my($bad_options) = 0;
-
-    # Jar options
-    if (!$main::options{chrome_jars} && !$main::options{chrome_files})
-    {
-        print "Warning: Both \$options{chrome_jars} and \$options{chrome_files} are off. You won't get any chrome.\n";
-        $bad_options = 1;
-    }
-
-    if (!$main::options{chrome_jars} && $main::options{use_jars})
-    {
-        print "Warning: \$options{chrome_jars} is off but \$options{use_jars} is on. Your build won't run (expects jars, got files).\n";
-        $bad_options = 1;
-    }
-
-    if (!$main::options{chrome_files} && !$main::options{use_jars})
-    {
-        print "Warning: \$options{chrome_jars} is off but \$options{chrome_files} is on. Your build won't run (expects files, got jars).\n";
-        $bad_options = 1;
-    }
-
-    if ($main::options{ldap_experimental} && !$main::options{ldap})
-    {
-        print "Warning: \$options{ldap_experimental} is on but \$options{ldap} is off. LDAP experimental features will not be built.\n";
-        $bad_options = 1;
-    }
-
-    if ($main::options{wsp} && !$main::options{xmlextras})
-    {
-        print "Warning: \$options{wsp} is on but \$options{xmlextras} is off. wsp will not be built.\n";
-        $bad_options = 1;
-    }
-
-    if ($bad_options) {
-        print "Build will start in 5 seconds. Press command-. to stop\n";
-        
-        DelayFor(5);
-    }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// GenBuildSystemInfo
-#//--------------------------------------------------------------------------------------------------
-
-sub GenBuildSystemInfo()
-{
-    # always rebuild the configuration program.
-    BuildProjectClean(":mozilla:build:mac:tools:BuildSystemInfo:BuildSystemInfo.mcp", "BuildSystemInfo");
-
-    # delete the configuration file.
-    unlink(":mozilla:build:mac:BuildSystemInfo.pm");
-    
-    # run the program.
-    system(":mozilla:build:mac:BuildSystemInfo");
-
-    # wait for the file to be created.
-    while (!(-e ":mozilla:build:mac:BuildSystemInfo.pm")) { WaitNextEvent(); }
-    
-    # wait for BuildSystemInfo to finish, so that we see correct results.
-    while (IsProcessRunning("BuildSystemInfo")) { WaitNextEvent(); }
-
-    # now, evaluate the contents of the file.
-    open(F, ":mozilla:build:mac:BuildSystemInfo.pm");
-    while (<F>) { eval; }
-    close(F);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// Make library aliases
-#//--------------------------------------------------------------------------------------------------
-
-sub MakeLibAliases()
-{
-    my($dist_dir) = GetBinDirectory();
-
-    #// ProfilerLib
-    if ($main::PROFILE)
-    {
-        my($profilerlibpath) = Moz::CodeWarriorLib::getCodeWarriorPath("MacOS Support:Profiler:Profiler Common:ProfilerLib");
-        MakeAlias("$profilerlibpath", "$dist_dir"."Essential Files:");
-    }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// ConfigureBuildSystem
-#//
-#// defines some build-system configuration variables.
-#//--------------------------------------------------------------------------------------------------
-sub ConfigureBuildSystem()
-{
-    #// In the future, we may want to do configurations based on the actual build system itself.
-    #// GenBuildSystemInfo();
-        
-    #// For now, if we discover a newer header file than existed in Universal Interfaces 3.2,
-    #// we'll assume that 3.3 or later is in use.
-    my($universal_interfaces) = Moz::CodeWarriorLib::getCodeWarriorPath("MacOS Support:Universal:Interfaces:CIncludes:");
-    if (-e ($universal_interfaces . "ControlDefinitions.h")) {
-        $main::UNIVERSAL_INTERFACES_VERSION = 0x0330;
-    }
-
-    #// Rename IC SDK folder in the Mac OS Support folder
-    my($ic_sdk_folder) = Moz::CodeWarriorLib::getCodeWarriorPath("MacOS Support:ICProgKit2.0.2");
-    if( -e $ic_sdk_folder)
-    {
-        my($new_ic_folder_name) = Moz::CodeWarriorLib::getCodeWarriorPath("MacOS Support:(ICProgKit2.0.2)");
-        rename ($ic_sdk_folder, $new_ic_folder_name);
-        # note that CodeWarrior doesn't descend into folders with () the name
-        print "Mozilla no longer needs the Internet Config SDK to build:\n  Renaming the 'ICProgKit2.0.2' folder to '(ICProgKit2.0.2)'\n";
-    }
-
-    printf("UNIVERSAL_INTERFACES_VERSION = 0x%04X\n", $main::UNIVERSAL_INTERFACES_VERSION);
-
-    # alias required CodeWarrior libs into the Essential Files folder (only the Profiler lib now)
-    MakeLibAliases();
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// CheckOutModule. Takes variable number of args; first two are required
-#//--------------------------------------------------------------------------------------------------
-sub CheckOutModule($$$$)
-{
-    my($session, $module, $revision, $date) = @_;
-
-    my($result) = $session->checkout($module, $revision, $date);
-    
-    # result of 1 is success
-    if ($result) { return; }
-    
-    my($checkout_err) = $session->getLastError();
-    if ($checkout_err == 708) {
-        die "Error: Checkout was cancelled.\n";
-    } elsif ($checkout_err == 911) {
-        die "Error: CVS session settings are incorrect. Check your password, and the CVS root settings.\n";
-    } elsif ($checkout_err == 703) {
-        die "Error: CVS checkout failed. Unknown module, unknown tag, bad username, or other CVS error.\n";
-    } elsif ($checkout_err == 711) {
-        print "Checkout of '$module' failed.\n";
-    }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// getScriptFolder
-#//--------------------------------------------------------------------------------------------------
-sub getScriptFolder()
-{
-    return dirname($0);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getScriptFolder
-#//--------------------------------------------------------------------------------------------------
-sub get_url_contents($)
-{
-    my($url) = @_;
-
-    my($url_contents) = LWP::Simple::get($url);
-    $url_contents =~ s/\r\n/\n/g;     # normalize linebreaks
-    $url_contents =~ s/\r/\n/g;       # normalize linebreaks
-    return $url_contents;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// get_files_from_content
-#//--------------------------------------------------------------------------------------------------
-sub uniq
-{
-    my $lastval;
-    grep(($_ ne $lastval, $lastval = $_)[$[], @_);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// get_files_from_content
-#//--------------------------------------------------------------------------------------------------
-sub get_files_from_content($)
-{
-    my($content) = @_;
-  
-    my(@jscalls) = grep (/return js_file_menu[^{]*/, split(/\n/, $content));
-    my $i;
-  
-    for ($i = 0; $i < @jscalls ; $i++)
-    {
-        $jscalls[$i] =~ s/.*\(|\).*//g;
-        my(@callparams) = split(/,/, $jscalls[$i]);
-        my ($repos, $dir, $file, $rev) = grep(s/['\s]//g, @callparams);
-        $jscalls[$i] = "$dir/$file";
-    }
-
-  &uniq(sort(@jscalls));
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// getLastUpdateTime
-#// 
-#// Get the last time we updated. Return 0 on failure
-#//--------------------------------------------------------------------------------------------------
-sub getLastUpdateTime($)
-{
-    my($timestamp_file) = @_;
- 
-    my($time_string);
-    
-    local(*TIMESTAMP_FILE);  
-    unless (open(TIMESTAMP_FILE, "< $timestamp_file")) { return 0; }
-
-    while (<TIMESTAMP_FILE>)
-    {
-        my($line) = $_;
-        chomp($line);
-
-        # ignore comments and empty lines
-        if ($line =~ /^\#/ || $line =~ /^\s*$/) {
-            next;
-        }
-        
-        $time_string = $line;
-    }
-
-    # get the epoch seconds
-    my($last_update_secs) = $time_string;
-    $last_update_secs =~ s/\s#.+$//;
-    
-    print "FAST_UPDATE found that you last updated at ".localtime($last_update_secs)."\n";
-    
-    # how long ago was this, in hours?
-    my($gm_now) = time();
-    my($update_hours) = 1 + ceil(($gm_now - $last_update_secs) / (60 * 60));
-    
-    return $update_hours;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// saveCheckoutTimestamp
-#// 
-#// Create a file on disk containing the current time. Param is time(), which is an Epoch seconds
-#// (and therefore in GMT).
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub saveCheckoutTimestamp($$)
-{
-    my($gm_secs, $timestamp_file) = @_;
-        
-    local(*TIMESTAMP_FILE);
-    open(TIMESTAMP_FILE, ">$timestamp_file") || die "Failed to open $timestamp_file\n";
-    print(TIMESTAMP_FILE "# time of last checkout or update, in GMT. Used by FAST_UPDATE\n");
-    print(TIMESTAMP_FILE "$gm_secs \# around ".localtime()." local time\n");
-    close(TIMESTAMP_FILE);
-
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// FastUpdate
-#// 
-#// Use Bonsai url data to update only those dirs which have new files
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub FastUpdate($$)
-{
-    my($modules, $timestamp_file) = @_;          # list of modules to check out
-
-    my($num_hours) = getLastUpdateTime($timestamp_file);
-    if ($num_hours == 0 || $num_hours > 170) {
-        print "Can't fast_update; last update was too long ago, or never. Doing normal checkout.\n";
-        return 0;
-    }
-
-    print "Doing fast update, pulling files changed in the last $num_hours hours\n";
-
-    my($cvsfile) = AskAndPersistFile($main::filepaths{"sessionpath"});
-    my($session) = Moz::MacCVS->new( $cvsfile );
-    unless (defined($session)) { die "Error: Checkout aborted. Cannot create session file: $session" }
-
-    # activate MacCVS
-    ActivateApplication('Mcvs');
-    
-    my($checkout_start_time) = time();
-
-    #print "Time now is $checkout_start_time ($checkout_start_time + 0)\n";
-    
-    my($this_co);
-    foreach $this_co (@$modules)
-    {
-        my($module, $revision, $date) = ($this_co->[0], $this_co->[1], $this_co->[2]);        
-        
-        # assume that things pulled by date wont change
-        if ($date ne "") {
-            print "$module is pulled by date, so ignoring in FastUpdate.\n";
-            next;
-        }
-
-        my($search_type) = "hours";
-        my($min_date) = "";
-        my($max_date) = "";
-        my($url) = "http://bonsai.mozilla.org/cvsquery.cgi?treeid=default&module=${module}&branch=${revision}&branchtype=match&dir=&file=&filetype=match&who=&whotype=match&sortby=Date&hours=${num_hours}&date=${search_type}&mindate=${min_date}&maxdate=${max_date}&cvsroot=%2Fcvsroot";
-
-        if ($revision eq "") {
-            print "Getting list of checkins to $module from Bonsai...\n";
-        } else {
-            print "Getting list of checkins to $module on branch $revision from Bonsai...\n";
-        }
-        my(@files) = &get_files_from_content(&get_url_contents($url));
-
-        if ($#files > 0)
-        {
-           my(@cvs_co_list);
-        
-           my($co_file);
-           foreach $co_file (@files)
-           {
-               print "Updating $co_file\n";
-               push(@cvs_co_list, $co_file);
-           }
-
-            my($result) = $session->update($revision, \@cvs_co_list);
-            # result of 1 is success
-            if (!$result) { die "Error: Fast update failed\n"; }
-        } else {
-            print "No files in this module changed\n";        
-        }
-    }
-    
-    saveCheckoutTimestamp($checkout_start_time, $timestamp_file);
-    return 1;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// Checkout
-#//--------------------------------------------------------------------------------------------------
-sub CheckoutModules($$$)
-{
-    my($modules, $pull_date, $timestamp_file) = @_;          # list of modules to check out
-
-    my($start_time) = TimeStart();
-
-#    assertRightDirectory();
-    my($cvsfile) = AskAndPersistFile($main::filepaths{"sessionpath"});
-    my($session) = Moz::MacCVS->new( $cvsfile );
-    unless (defined($session)) { die "Error: Checkout aborted. Cannot create session file: $session" }
-
-    my($checkout_start_time) = time();
-    
-    # activate MacCVS
-    ActivateApplication('Mcvs');
-
-    my($this_co);
-    foreach $this_co (@$modules)
-    {
-        my($module, $revision, $date) = ($this_co->[0], $this_co->[1], $this_co->[2]);
-        if ($date eq "") {
-            $date = $pull_date;
-        }
-        CheckOutModule($session, $module, $revision, $date);
-        # print "Checking out $module with ref $revision, date $date\n";
-    }
-
-    saveCheckoutTimestamp($checkout_start_time, $timestamp_file);
-    TimeEnd($start_time, "Checkout");
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// ReadCheckoutModulesFile
-#//--------------------------------------------------------------------------------------------------
-sub ReadCheckoutModulesFile($$)
-{
-    my($modules_file, $co_list) = @_;
-
-    my($checkout_file) = getScriptFolder().":".$modules_file;
-    local(*CHECKOUT_FILE);  
-    open(CHECKOUT_FILE, "< $checkout_file") || die "Error: failed to open checkout list $checkout_file\n";
-    while (<CHECKOUT_FILE>)
-    {
-        my($line) = $_;
-        chomp($line);
-    
-        # ignore comments and empty lines
-        if ($line =~ /^\#/ || $line =~ /^\s*$/) {
-            next;
-        }
-    
-        my(@cvs_co) = ["", "", ""];
-        
-        my($module, $revision, $date) = (0, 1, 2);
-        
-        if ($line =~ /\s*([^#,\s]+)\s*\,\s*([^#,\s]+)\s*\,\s*([^#]+)/)
-        {
-            @cvs_co[$module] = $1;
-            @cvs_co[$revision] = $2;
-            @cvs_co[$date] = $3;
-        }
-        elsif ($line =~ /\s*([^#,\s]+)\s*\,\s*([^#,\s]+)\s*(#.+)?/)
-        {
-            @cvs_co[$module] = $1;
-            @cvs_co[$revision] = $2;
-        }
-        elsif ($line =~ /\s*([^#,\s]+)\s*\,\s*,\s*([^#,]+)/)       
-        {
-            @cvs_co[$module] = $1;
-            @cvs_co[$date] = $2;
-        }
-        elsif ($line =~ /\s*([^#,\s]+)/)
-        {
-            @cvs_co[$module] = $1;
-        }
-        else
-        {
-            die "Error: unrecognized line '$line' in $modules_file\n";
-        }
-        
-        # strip surrounding space from date
-        @cvs_co[$date] =~ s/^\s*|\s*$//g;
-        
-        # print "Going to check out '@cvs_co[$module]', '@cvs_co[$revision]', '@cvs_co[$date]'\n";
-        push(@$co_list, \@cvs_co);
-    }
-
-    close(CHECKOUT_FILE);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// PullFromCVS
-#//--------------------------------------------------------------------------------------------------
-sub PullFromCVS($$)
-{
-    unless ( $main::build{pull} ) { return; }
-    
-    my($modules_file, $timestamp_file) = @_;
-
-    StartBuildModule("pull");
-    
-    my(@cvs_co_list);
-    ReadCheckoutModulesFile($modules_file, \@cvs_co_list);
-
-    if ($main::FAST_UPDATE && $main::options{pull_by_date})
-    {
-        die "Error: you can't use FAST_UPDATE if you are pulling by date.\n";
-    }
-
-    my($did_fast_update) = $main::FAST_UPDATE && FastUpdate(\@cvs_co_list, $timestamp_file);
-    if (!$did_fast_update)
-    {
-        my($pull_date) = "";
-        if ($main::options{pull_by_date})
-        {
-            # acceptable CVS date formats are (in local time):
-            # ISO8601 (e.g. "1972-09-24 20:05") and Internet (e.g. "24 Sep 1972 20:05").
-            # Perl's localtime() string format also seems to work.
-            $pull_date = localtime().""; # force string interp.
-            print "Pulling by date $pull_date\n";
-        }
-
-        CheckoutModules(\@cvs_co_list, $pull_date, $timestamp_file);
-    }
-
-    EndBuildModule("pull");
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// RunBuild
-#//--------------------------------------------------------------------------------------------------
-sub RunBuild($$$$)
-{
-    my($do_pull, $do_build, $input_files, $build_prefs) = @_;
-
-    InitBuildProgress($input_files->{"buildprogress"});
-    
-    # if we are pulling, we probably want to do a full build, so clear the build progress
-    if ($do_pull) {
-        ClearBuildProgress();    
-    }
-    
-    # read local prefs, and the build progress file, and set flags to say what to build
-    SetupBuildParams(\%main::build,
-                     \%main::options,
-                     \%main::optiondefines,
-                     \%main::filepaths,
-                     $input_files->{"buildflags"},
-                     $build_prefs);
-    
-    # If we were told to pull, make sure we do, overriding prefs etc.
-    if ($do_pull)
-    {
-        $main::build{"pull"} = 1;
-    }
-    
-    # transfer this flag
-    $CodeWarriorLib::CLOSE_PROJECTS_FIRST = $main::CLOSE_PROJECTS_FIRST;
-    
-    # setup the build log
-    SetupBuildLog($main::filepaths{"buildlogfilepath"}, $main::USE_TIMESTAMPED_LOGS);
-    StopForErrors();
-    
-    if ($main::LOG_TO_FILE) {
-        RedirectOutputToFile($main::filepaths{"scriptlogfilepath"});
-    }
-        
-    # run a pre-build check to see that the tools etc are in order
-    DoPrebuildCheck();
-    
-    # do the pull
-    PullFromCVS($input_files->{"checkoutdata"}, $input_files->{"checkouttime"});
-    
-    unless ($do_build) { return; }
-
-    my($build_start) = TimeStart();
-
-    # check the build environment
-    ConfigureBuildSystem();
-
-    # here we load and call methods in the build module indirectly.
-    # we have to use indirection because the build module can be named
-    # differently for different builds.
-    chdir(dirname($0));     # change to the script dir
-    my($build_module) = $input_files->{"buildmodule"};
-    # load the build module
-    require $build_module;
-    {   # scope for no strict 'refs'
-        no strict 'refs';
-        
-        my($package_name) = $build_module;
-        $package_name =~ s/\.pm$//;
-        
-        chdir($main::MOZ_SRC);
-        &{$package_name."::BuildDist"}();
-        
-        chdir($main::MOZ_SRC);
-        &{$package_name."::BuildProjects"}();
-    }
-    
-    # the build finished, so clear the build progress state
-    ClearBuildProgress();
-    
-    TimeEnd($build_start, "Build");
-    print "Build complete\n";
-}
-
-1;

mozilla/build/mac/build_scripts/Moz/BuildFlags.pm

@@ -1,425 +0,0 @@
-#!perl -w
-package Moz::BuildFlags;
-
-require 5.004;
-require Exporter;
-
-# Package that attempts to read a file from the Preferences folder,
-# and get build settings out of it
-
-use strict;
-use Exporter;
-
-use Cwd;
-use File::Basename;
-
-use Moz::Moz;
-use Moz::Prefs;
-
-use vars qw(@ISA @EXPORT);
-
-@ISA      = qw(Exporter);
-@EXPORT   = qw(
-                SetupBuildParams
-                InitBuildProgress
-                WriteBuildProgress
-                ClearBuildProgress
-                ReadBuildProgress
-              );
-
-
-my(@build_flags);
-my(@options_flags);
-my(@filepath_flags);
-
-my(%arrays_list) = (
-  "build_flags",    \@build_flags,
-  "options_flags",  \@options_flags,
-  "filepath_flags", \@filepath_flags
-);
-
-my($progress_file) = "¥ÊBuild progress";
-
-#-------------------------------------------------------------------------------
-# appendArrayFlag
-# 
-# Set a flag in the array
-#-------------------------------------------------------------------------------
-sub appendArrayFlag(@)
-{
-  my($array_name) = shift;
-  my($setting) = shift;
-  my($value) = shift;
-  
-  my(@optional_values);
-  foreach (@_) {
-    push(@optional_values, $_);
-  }
-
-  my(@this_flag) = [$setting, $value, @optional_values];
-  my($flags_array) = $arrays_list{$array_name};
-  if ($flags_array)
-  {
-    push(@{$flags_array}, @this_flag) || die "Failed to append\n";
-  }
-  else
-  {
-    die "Error: unknown build flags array $array_name\n";
-  }
-}
-
-#-------------------------------------------------------------------------------
-# readFlagsFile
-# 
-# Read the file of build flags from disk. File path is relative to the
-# script directory.
-#-------------------------------------------------------------------------------
-sub readFlagsFile($)
-{
-  my($flags_file) = @_;
-
-  my($file_path) = $0;
-  $file_path =~ s/[^:]+$/$flags_file/;
-  
-  print "Reading build flags from '$file_path'\n";
-
-  local(*FLAGS_FILE);
-  open(FLAGS_FILE, "< $file_path") || die "Error: failed to open flags file $file_path\n";
-
-  my($cur_array) = "";
-  
-  while(<FLAGS_FILE>)
-  {
-      my($line) = $_;
-      chomp($line);
-      
-      # ignore comments and empty lines  
-      if ($line =~ /^\#/ || $line =~ /^\s*$/) {
-        next;
-      }
-
-      # 1-word line, probably array name
-      if ($line =~ /^([^#\s]+)\s*$/)
-      {
-        $cur_array = $1;
-        next;  
-      }
-      elsif ($line =~ /^([^#\s]+)\s+\"(.+)\"(\s+#.+)?$/)    # quoted option, possible comment
-      {
-        my($flag) = $1;
-        my($setting) = $2;
-        
-        appendArrayFlag($cur_array, $flag, $setting);
-      }
-      elsif ($line =~ /^([^#\s]+)((\s+[^#\s]+)+)(\s+#.+)?$/)  # multiple word line, possible comment
-      {
-        my($flag) = $1;
-        
-        appendArrayFlag($cur_array, $flag, split(' ', $2));
-      }
-      else
-      {
-        die "Error: unknown build flag at '$line'\n";
-      }
-  
-  }
-  
-  close(FLAGS_FILE);
-}
-
-
-
-#-------------------------------------------------------------------------------
-# flagsArrayToHash
-# 
-# Utility routine to migrate flag from a 2D array to a hash, where
-# item[n][0] is the hash entry name, and item[n][1] is the hash entry value.
-#-------------------------------------------------------------------------------
-
-sub flagsArrayToHash($$)
-{
-  my($src_array, $dest_hash) = @_;
-  
-  my($item);
-  foreach $item (@$src_array)
-  {
-    $dest_hash->{$item->[0]} = $item->[1];
-  }
-}
-
-#-----------------------------------------------
-# printHash
-#
-# Utility routine to print a hash
-#-----------------------------------------------
-sub printHash($)
-{
-  my($hash_ref) = @_;
- 
-  print "Printing hash:\n";
-  
-  my($key, $value);
-  
-  while (($key, $value) = each (%$hash_ref))
-  {
-    print "  $key $value\n";
-  }
-}
-
-
-#-----------------------------------------------
-# printBuildArray
-#
-# Utility routine to print a 2D array
-#-----------------------------------------------
-sub printBuildArray($)
-{
-  my($build_array) = @_;
-  
-  my($entry);
-  foreach $entry (@$build_array)
-  {  
-    print "$entry->[0] = $entry->[1]\n";
-  }
-
-}
-
-#-------------------------------------------------------------------------------
-# SetBuildFlags
-#-------------------------------------------------------------------------------
-sub SetBuildFlags($)
-{
-  my($build) = @_;
-
-  flagsArrayToHash(\@build_flags, $build);
-}
-
-#-------------------------------------------------------------------------------
-# SetBuildOptions
-#-------------------------------------------------------------------------------
-sub SetBuildOptions($)
-{
-  my($options) = @_;
-
-  flagsArrayToHash(\@options_flags, $options);
-}
-
-#-------------------------------------------------------------------------------
-# SetFilepathFlags
-#-------------------------------------------------------------------------------
-sub SetFilepathFlags($)
-{
-  my($filepath) = @_;
-
-  flagsArrayToHash(\@filepath_flags, $filepath);
-}
-
-#-------------------------------------------------------------------------------
-# SetOptionDefines
-#-------------------------------------------------------------------------------
-sub SetOptionDefines($)
-{
-  my($optiondefines) = @_;
-
-  foreach my $entry (@options_flags)
-  {
-    if (defined($entry->[2])) {
-      $optiondefines->{$entry->[0]}{$entry->[2]} = 1;
-    }
-  }
-}
-
-
-#-------------------------------------------------------------------------------
-# PropagateAllFlags
-#-------------------------------------------------------------------------------
-sub PropagateAllFlags($)
-{
-  my($build_array) = @_;
-  
-  # if "all" is set, set all the flags to 1
-  unless ($build_array->[0][0] eq "all") { die "Error: 'all' must come first in the flags array\n"; }
-  
-  if ($build_array->[0][1] == 1)
-  {
-    my($index);
-    foreach $index (@$build_array)
-    {
-      $index->[1] = 1;
-    }
-  }
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// _getBuildProgressFile
-#//--------------------------------------------------------------------------------------------------
-sub _getBuildProgressFile()
-{
-  return $progress_file;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// setBuildProgressStart
-#// 
-#// This automagically sets $build{"all"} to 0
-#//--------------------------------------------------------------------------------------------------
-sub setBuildProgressStart($$)
-{
-  my($build_array, $name) = @_;
-
-  my($index);
-  foreach $index (@$build_array)
-  {
-    $index->[1] = 0;
-    if ($index->[0] eq $name) {
-      last;
-    }    
-  }
-
-  print "Building from module after $name, as specified by build progress\n";
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// InitBuildProgress
-#//--------------------------------------------------------------------------------------------------
-sub InitBuildProgress($)
-{
-  my($prog_file) = @_;
-  if ($prog_file ne "") {
-    $progress_file = full_path_to($prog_file);
-    print "Writing build progress to $progress_file\n";
-  }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// WriteBuildProgress
-#//--------------------------------------------------------------------------------------------------
-sub WriteBuildProgress($)
-{
-  my($module_built) = @_;
-
-  my($progress_file) = _getBuildProgressFile();
-  
-  if ($progress_file ne "")
-  {
-    open(PROGRESS_FILE, ">>$progress_file") || die "Failed to open $progress_file\n";
-    print(PROGRESS_FILE "$module_built\n");
-    close(PROGRESS_FILE);
-  }
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// ClearBuildProgress
-#//--------------------------------------------------------------------------------------------------
-sub ClearBuildProgress()
-{
-  my($progress_file) = _getBuildProgressFile();
-  if ($progress_file ne "") {
-    unlink $progress_file;
-  }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// WipeBuildProgress
-#//--------------------------------------------------------------------------------------------------
-sub WipeBuildProgress()
-{
-  print "Ignoring build progress\n";
-  ClearBuildProgress();
-  $progress_file = "";
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// ReadBuildProgress
-#//--------------------------------------------------------------------------------------------------
-sub ReadBuildProgress($)
-{
-  my($build_array) = @_;
-  my($progress_file) = _getBuildProgressFile();
-
-  my($last_module);
-  
-  if (open(PROGRESS_FILE, "< $progress_file"))
-  {
-    print "Getting build progress from $progress_file\n";
-    
-    while (<PROGRESS_FILE>)
-    {
-      my($line) = $_;
-      chomp($line);
-      $last_module = $line;
-    }
-    
-    close(PROGRESS_FILE);
-  }
-  
-  if ($last_module)
-  {
-    setBuildProgressStart($build_array, $last_module);
-  }
-}
-
-#-------------------------------------------------------------------------------
-# clearOldBuildSettings
-#-------------------------------------------------------------------------------
-sub clearOldBuildSettings($$$$)
-{
-  my($build, $options, $optiondefines, $filepaths) = @_;
-
-  # empty the arrays in case we're being called twice
-  @build_flags = ();
-  @options_flags = ();
-  @filepath_flags = ();
-  
-  # and empty the hashes
-  %$build = ();
-  %$options = ();
-  %$optiondefines = ();
-  %$filepaths = ();
-}
-
-#-------------------------------------------------------------------------------
-# SetupBuildParams
-#-------------------------------------------------------------------------------
-sub SetupBuildParams($$$$$$)
-{
-  my($build, $options, $optiondefines, $filepaths, $flags_file, $prefs_file) = @_;
-  
-  # Empty the hashes and arrays, to wipe out any stale data.
-  # Needed because these structures persist across two build scripts
-  # called using 'do' from a parent script.
-  clearOldBuildSettings($build, $options, $optiondefines, $filepaths);
-  
-  # Read from the flags file, which sets up the various arrays
-  readFlagsFile($flags_file);
-  
-  # If 'all' is set in the build array, propagate that to all entries
-  PropagateAllFlags(\@build_flags);
-  
-  # read the user pref file, that can change values in the array
-  ReadMozUserPrefs($prefs_file, \@build_flags, \@options_flags, \@filepath_flags);
-
-  # If build progress exists, this clears flags in the array up to a certain point
-  if ($main::USE_BUILD_PROGRESS) {
-    ReadBuildProgress(\@build_flags);
-  } else {
-    WipeBuildProgress();
-  }
-  
-#  printBuildArray(\@build_flags);
-#  printBuildArray(\@options_flags);
-  
-  SetBuildFlags($build);
-  SetBuildOptions($options);
-  SetOptionDefines($optiondefines);
-  SetFilepathFlags($filepaths);
-  
-#  printHash($build);
-#  printHash($options);
-}
-
-
-1;

mozilla/build/mac/build_scripts/Moz/BuildUtils.pm

@@ -1,786 +0,0 @@
-
-package Moz::BuildUtils;
-
-require 5.004;
-require Exporter;
-
-# Package that contains build util functions specific to the Mozilla build
-# process.
-
-use strict;
-use Exporter;
-
-use Cwd;
-use File::Path;
-use File::Basename;
-
-use Mac::Events;
-use Mac::StandardFile;
-
-use Moz::Moz;
-use Moz::BuildFlags;
-use Moz::MacCVS;
-#use Moz::ProjectXML;  #optional; required for static build only
-
-use vars qw(@ISA @EXPORT);
-
-@ISA      = qw(Exporter);
-@EXPORT   = qw(
-                SetupDefaultBuildOptions
-                SetupBuildRootDir
-                StartBuildModule
-                EndBuildModule
-                GetBinDirectory
-                BuildOneProjectWithOutput
-                BuildOneProject
-                BuildProject
-                BuildProjectClean
-                BuildIDLProject
-                BuildFolderResourceAliases
-                AskAndPersistFile
-                DelayFor
-                TimeStart
-                TimeEnd
-                EmptyTree
-                SetupBuildLog
-                SetBuildNumber
-                SetTimeBomb
-                UpdateConfigHeader
-              );
-
-#//--------------------------------------------------------------------------------------------------
-#// SetupDefaultBuildOptions
-#//--------------------------------------------------------------------------------------------------
-sub SetupDefaultBuildOptions($$$)
-{
-    my($debug, $bin_dir, $config_header_file_name) = @_;
-
-    # Here we set up defaults for the various build flags.
-    # If you want to override any of these, it's best to do
-    # so via the relevant preferences file, which lives in
-    # System Folder:Preferences:Mozilla build prefs:{build prefs file}.
-    # For the name of the prefs file, see the .pl script that you
-    # run to start this build. The prefs files are created when
-    # you run the build, and contain some documentation.
-    
-    #-------------------------------------------------------------
-    # configuration variables that globally affect what is built
-    #-------------------------------------------------------------
-    $main::DEBUG                  = $debug;
-    $main::PROFILE                = 0;
-    $main::RUNTIME                = 0;    # turn on to just build runtime support and NSPR projects
-    $main::GC_LEAK_DETECTOR       = 0;    # turn on to use GC leak detection
-    $main::MOZILLA_OFFICIAL       = 0;    # generate build number
-    $main::LOG_TO_FILE            = 0;    # write perl output to a file
-    
-    #-------------------------------------------------------------
-    # configuration variables that affect the manner of building, 
-    # but possibly affecting the outcome.
-    #-------------------------------------------------------------    
-    $main::ALIAS_SYM_FILES        = $main::DEBUG;
-    $main::CLOBBER_LIBS           = 1;      # turn on to clobber existing libs and .xSYM files before
-                                            # building each project                         
-    # The following two options will delete all dist files (if you have $main::build{dist} turned on),
-    # but leave the directory structure intact.
-    $main::CLOBBER_DIST_ALL       = 1;    # turn on to clobber all aliases/files inside dist (headers/xsym/libs)
-    $main::CLOBBER_DIST_LIBS      = 0;    # turn on to clobber only aliases/files for libraries/sym files in dist
-    $main::CLOBBER_IDL_PROJECTS   = 0;    # turn on to clobber all IDL projects.
-    $main::CLOBBER_PROJECTS       = 0;    # turn on to remove object code from each project before building it
-    
-    $main::UNIVERSAL_INTERFACES_VERSION = 0x0320;
-    
-    #-------------------------------------------------------------
-    # configuration variables that are preferences for the build,
-    # style and do not affect what is built.
-    #-------------------------------------------------------------
-    $main::CLOSE_PROJECTS_FIRST   = 0;
-                                    # 1 = close then make (for development),
-                                    # 0 = make then close (for tinderbox).
-    $main::USE_TIMESTAMPED_LOGS   = 0;
-    $main::USE_BUILD_PROGRESS     = 1;    # track build progress for restartable builds
-    #-------------------------------------------------------------
-    # END OF CONFIG SWITCHES
-    #-------------------------------------------------------------
-    
-    $main::BIN_DIRECTORY = $bin_dir;
-    $main::DEFINESOPTIONS_FILE = $config_header_file_name;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// SetupBuildRootDir
-#//--------------------------------------------------------------------------------------------------
-sub SetupBuildRootDir($)
-{
-    my($rel_path_to_script) = @_;
-
-    my($cur_dir) = cwd();
-    $cur_dir =~ s/$rel_path_to_script$//;
-    chdir($cur_dir) || die "Error: failed to set build root directory to '$cur_dir'.\nYou probably need to put 'mozilla' one level down (in a folder).\n";
-    $main::MOZ_SRC = cwd();
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// StartBuildModule
-#//--------------------------------------------------------------------------------------------------
-sub StartBuildModule($)
-{
-    my($module) = @_;
-
-    print("---- Start of $module ----\n");
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// EndBuildModule
-#//--------------------------------------------------------------------------------------------------
-sub EndBuildModule($)
-{
-    my($module) = @_;
-    WriteBuildProgress($module);
-    print("---- End of $module ----\n");
-}
-
-#--------------------------------------------------------------------------------------------------
-# GetBinDirectory
-#--------------------------------------------------------------------------------------------------
-sub GetBinDirectory()
-{
-    if ($main::BIN_DIRECTORY eq "") { die "Dist directory not set\n"; }
-    return $main::BIN_DIRECTORY;
-}
-
-#--------------------------------------------------------------------------------------------------
-# AskAndPersistFile stores the information about the user pick inside
-# the file $session_storage
-#--------------------------------------------------------------------------------------------------
-sub AskAndPersistFile($)
-{
-    my ($sessionStorage) = @_;
-    my $cvsfile;
-
-    if (( -e $sessionStorage) &&
-        open( SESSIONFILE, $sessionStorage ))
-    {
-    # Read in the path if available
-        $cvsfile = <SESSIONFILE>;
-        chomp $cvsfile;
-        close SESSIONFILE;
-        if ( ! -e $cvsfile )
-        {
-            print STDERR "$cvsfile has disappeared\n";
-            undef $cvsfile;
-        }
-    }
-    unless (defined ($cvsfile))
-    {
-        # make sure that MacPerl is a front process
-        ActivateApplication('McPL');
-        MacPerl::Answer("Could not find your MacCVS session file. Please choose one", "OK");
-        
-        # prompt user for the file name, and store it
-        my $macFile = StandardGetFile( 0, "McvD");  
-        if ( $macFile->sfGood() )
-        {
-            $cvsfile = $macFile->sfFile();
-            # save the choice if we can
-            if ( open (SESSIONFILE, ">" . $sessionStorage))
-            {
-                printf SESSIONFILE $cvsfile, "\n";
-                close SESSIONFILE;
-            }
-            else
-            {
-                print STDERR "Could not open storage file $sessionStorage for saving $cvsfile\n";
-            }
-        }
-    }
-    return $cvsfile;
-}
-
-
-#--------------------------------------------------------------------------------------------------
-# BuildIDLProject
-#
-#--------------------------------------------------------------------------------------------------
-
-sub BuildIDLProject($$)
-{
-    my ($project_path, $module_name) = @_;
-
-    if ($main::CLOBBER_IDL_PROJECTS)
-    {
-        my (@suffix_list) = (".mcp", ".xml");
-        my ($project_name, $project_dir, $suffix) = fileparse($project_path, @suffix_list);
-        if ($suffix eq "") { die "Error: Project, $project_path must end in .xml or .mcp\n"; }
-
-        my($datafolder_path);
-        if ($suffix eq ".xml")
-        {
-            $datafolder_path = $project_dir . "_" . $project_name . " Data:";
-        }
-        else {
-            $datafolder_path = $project_dir . $project_name . " Data:";
-        }
-
-        print STDERR "Deleting IDL data folder: $datafolder_path\n";
-        EmptyTree($datafolder_path);
-    }
-
-    BuildOneProject($project_path,  "headers", 0, 0, 0);
-    BuildOneProject($project_path,  $module_name.".xpt", 1, 0, 1);
-}
-
-
-#--------------------------------------------------------------------------------------------------
-# CreateStaticLibTargets
-#
-#--------------------------------------------------------------------------------------------------
-sub CreateXMLStaticLibTargets($)
-{
-    my($xml_path) = @_;
-
-    my (@suffix_list) = (".xml");
-    my ($project_name, $project_dir, $suffix) = fileparse($xml_path, @suffix_list);
-    if ($suffix eq "") { die "XML munging: $xml_path must end in .xml\n"; }
-
-    #sniff the file to see if we need to fix up broken Pro5-exported XML
-    print "Parsing $xml_path\n";
-    
-    my $ide_version = Moz::ProjectXML::SniffProjectXMLIDEVersion($xml_path);
-    if ($ide_version eq "4.0")
-    {
-        my $new_file = $project_dir.$project_name."2.xml";
-        
-        print "Cleaning up Pro 5 xml to $new_file\n";
-        
-        Moz::ProjectXML::CleanupPro5XML($xml_path, $new_file);
-
-        unlink $xml_path;
-        rename ($new_file, $xml_path);
-    }
-    
-    my $doc = Moz::ProjectXML::ParseXMLDocument($xml_path);
-    my @target_list = Moz::ProjectXML::GetTargetsList($doc);
-    my $target;
-    
-    my %target_hash;    # for easy lookups below
-    foreach $target (@target_list) { $target_hash{$target} = 1; }
-    
-    foreach $target (@target_list)
-    {
-        if ($target =~ /(.+).shlb$/)        # if this is a shared lib target
-        {
-            my $target_base = $1;
-            my $static_target = $target_base.".o";
-            
-            # ensure that this does not exist already
-            if ($target_hash{$static_target}) {
-                print "Static target $static_target already exists in project. Not making\n";
-                next;
-            }
-            
-            print "Making static target '$static_target' from target '$target'\n";
-
-            Moz::ProjectXML::CloneTarget($doc, $target, $static_target);
-            Moz::ProjectXML::SetAsStaticLibraryTarget($doc, $static_target, $static_target);
-        }
-    }
-    
-    print "Writing XML file to $xml_path\n";
-    my $temp_path = $project_dir."_".$project_name.".xml";
-    Moz::ProjectXML::WriteXMLDocument($doc, $temp_path, $ide_version);
-    Moz::ProjectXML::DisposeXMLDocument($doc);
-    
-    if (-e $temp_path)
-    {
-        unlink $xml_path;
-        rename ($temp_path, $xml_path);
-    }
-    else
-    {
-        die "Error: Failed to add new targets to XML project\n";
-    }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// ProcessProjectXML
-#// 
-#// Helper routine to allow for XML pre-processing. This should read in the XML, process it,
-#// and replace the original file with the processed version.
-#//--------------------------------------------------------------------------------------------------
-sub ProcessProjectXML($)
-{
-    my($xml_path) = @_;
-  
-    # we need to manually load Moz::ProjectXML, becaues not everyone will have the
-    # required perl modules in their distro.
-    my($cur_dir) = cwd();
-    
-    chdir(dirname($0));     # change to the script dir
-    eval "require Moz::ProjectXML";
-    if ($@) { die "Error: could not do Project XML munging because you do not have the correct XML modules installed. Error is:\n################\n $@################"; }
-    
-    chdir($cur_dir);
-    
-    CreateXMLStaticLibTargets($xml_path);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// Build one project, and make the alias. Parameters are project path, target name, shared  library
-#// name, make shlb alias (boolean), make xSYM alias (boolean), and is component (boolean).
-#//--------------------------------------------------------------------------------------------------
-
-sub BuildOneProjectWithOutput($$$$$$)
-{
-    my ($project_path, $target_name, $output_name, $alias_lib, $alias_xSYM, $component) = @_;
-
-    unless ($project_path =~ m/^$main::BUILD_ROOT.+/) { return; }
-
-    my (@suffix_list) = (".mcp", ".xml");
-    my ($project_name, $project_dir, $suffix) = fileparse($project_path, @suffix_list);
-    if ($suffix eq "") { die "Error: Project, $project_path must end in .xml or .mcp\n"; }
-    
-    my($dist_dir) = GetBinDirectory();
-    
-    # Put libraries in "Essential Files" folder, Components in "Components" folder
-    my($output_dir)  = $component ? "Components:" : "Essential Files:";
-    my($output_path) = $dist_dir.$output_dir;
-
-    if ($main::options{static_build})
-    {      
-      if ($output_name =~ /\.o$/ || $output_name =~ /\.[Ll]ib$/)
-      {
-        $alias_xSYM = 0;
-        $alias_lib  = 1;
-        $output_path = $main::DEBUG ? ":mozilla:dist:static_libs_debug:" : ":mozilla:dist:static_libs:";
-      }
-    }
-
-    # if the flag is on to export projects to XML, export and munge them
-    if ($main::EXPORT_PROJECTS && !($project_path =~ /IDL\.mcp$/))
-    {
-        my $xml_out_path = $project_path;
-
-        $xml_out_path =~ s/\.mcp$/\.xml/;
-
-        # only do this if project is newer?
-        if (! -e $xml_out_path)
-        {
-          ExportProjectToXML(full_path_to($project_path), full_path_to($xml_out_path));
-          ProcessProjectXML($xml_out_path);
-        }
-    }
-        
-    # if the flag is set to use XML projects, default to XML if the file 
-    # is present.
-    if ($main::USE_XML_PROJECTS && !($project_path =~ /IDL\.mcp$/))
-    {
-      my $xml_project_path = $project_dir.$project_name.".xml";
-      if (-e $xml_project_path)
-      {
-        $project_path = $xml_project_path;
-        $suffix = ".xml";
-      }
-    }
-    
-    if ($suffix eq ".xml")
-    {
-        my($xml_path) = $project_path;
-        # Prepend an "_" onto the name of the generated project file so it doesn't conflict
-        $project_path = $project_dir . "_" . $project_name . ".mcp";
-        my($project_modtime) = (-e $project_path ? GetFileModDate($project_path) : 0);
-        my($xml_modtime) = (-e $xml_path ? GetFileModDate($xml_path) : 0);
-
-        if ($xml_modtime > $project_modtime)
-        {
-            print("Importing $project_path from $project_name.xml.\n");
-            unlink($project_path);
-            # Might want to delete the "xxx.mcp Data" dir ???
-            ImportXMLProject(full_path_to($xml_path), full_path_to($project_path));
-        }
-    }
-
-
-    if ($main::CLOBBER_LIBS)
-    {
-        unlink "$project_dir$output_name";              # it's OK if these fail
-        unlink "$project_dir$output_name.xSYM";
-    }
-    
-    DoBuildProject($project_path, $target_name, $main::CLOBBER_PROJECTS);
-    
-    $alias_lib  ? MakeAlias("$project_dir$output_name",      "$output_path") : 0;
-    $alias_xSYM ? MakeAlias("$project_dir$output_name.xSYM", "$output_path") : 0;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// For compatiblity with existing scripts, BuildOneProject now just calls
-#// BuildOneProjectWithOutput, with the output name and target name identical.
-#// Note that this routine assumes that the target name and the shared libary name
-#// are the same.
-#//--------------------------------------------------------------------------------------------------
-
-sub BuildOneProject($$$$$)
-{
-    my ($project_path, $target_name, $alias_lib, $alias_xSYM, $component) = @_;
-    
-	BuildOneProjectWithOutput($project_path, $target_name, $target_name,
-							  $alias_lib, $alias_xSYM, $component);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// For compatiblity with existing scripts, BuildProject now just calls
-#// BuildOneProjectWithOutput, with the output name and target name identical.
-#// Note that this routine assumes that the target name and the shared libary name
-#// are the same. No aliases of the output are made.
-#//--------------------------------------------------------------------------------------------------
-
-sub BuildProject($$)
-{
-    my ($project_path, $target_name) = @_;
-    
-	BuildOneProjectWithOutput($project_path, $target_name, $target_name, 0, 0, 0);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// Identical to BuildProject but clobbers the project before building it.
-#//--------------------------------------------------------------------------------------------------
-
-sub BuildProjectClean($$)
-{
-    my ($project_path, $target_name) = @_;
-    my ($save_clobber_flag) = $main::CLOBBER_PROJECTS;
-    $main::CLOBBER_PROJECTS = 1;
-	BuildOneProjectWithOutput($project_path, $target_name, $target_name, 0, 0, 0);
-	$main::CLOBBER_PROJECTS = $save_clobber_flag;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// Make resource aliases for one directory
-#//--------------------------------------------------------------------------------------------------
-
-sub BuildFolderResourceAliases($$)
-{
-    my($src_dir, $dest_dir) = @_;
-        
-    # get a list of all the resource files
-    opendir(SRCDIR, $src_dir) || die("can't open $src_dir");
-    my(@resource_files) = readdir(SRCDIR);
-    closedir(SRCDIR);
-    
-    # make aliases for each one into the dest directory
-    print("Placing aliases to all files from $src_dir in $dest_dir\n");
-    for ( @resource_files )
-    {
-        next if $_ eq "CVS";
-        #print("    Doing $_\n");
-        if (-l $src_dir.$_)
-        {
-            print("     $_ is an alias\n");
-            next;
-        }
-        my($file_name) = $src_dir . $_; 
-        MakeAlias($file_name, $dest_dir);
-    }
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// DelayFor
-#//
-#// Delay for the given number of seconds, allowing the script to be cancelled
-#//--------------------------------------------------------------------------------------------------
-
-sub DelayFor($)
-{
-  my($delay_secs) = @_;
-  
-  STDOUT->autoflush(1);
-  
-  my($end_time) = time() + $delay_secs;
-    
-  my($last_time) = 0;
-  my($cur_time) = time();
-  
-  while ($cur_time < $end_time)
-  {
-    $cur_time = time();
-    if ($cur_time > $last_time)
-    {
-      print ".";
-      $last_time = $cur_time;
-    }
-    
-    WaitNextEvent();
-  }
-
-  print "\n";
-  STDOUT->autoflush(0);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// TimeStart
-#//--------------------------------------------------------------------------------------------------
-sub TimeStart()
-{
-    return time();
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// TimeEnd
-#//--------------------------------------------------------------------------------------------------
-sub TimeEnd($$)
-{
-    use integer;
-    
-    my($start_time, $operation_name) = @_;
-    my($end_time) = time();
-    
-    my($tot_sec) = $end_time - $start_time;
-    
-    my($seconds) = $tot_sec;
-    
-    my($hours) = $seconds / (60 * 60);
-    $seconds -= $hours * (60 * 60);
-    
-    my($minutes) = $seconds / 60;
-    $seconds -= $minutes * 60;
-        
-    print "$operation_name took $hours hours $minutes minutes and $seconds seconds\n";
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// Remove all files from a tree, leaving directories intact (except "CVS").
-#//--------------------------------------------------------------------------------------------------
-
-sub EmptyTree($)
-{
-    my ($root) = @_; 
-    #print "EmptyTree($root)\n";
-    opendir(DIR, $root);
-    my $sub;
-    foreach $sub (readdir(DIR))
-    {
-        my $fullpathname = $root.$sub; # -f, -d only work on full paths
-
-        # Don't call empty tree for the alias of a directory.
-        # -d returns true for the alias of a directory, false for a broken alias)
-
-        if (-d $fullpathname)
-        {
-            if (-l $fullpathname)   # delete aliases
-            {
-                unlink $fullpathname;
-                next;
-            }
-            EmptyTree($fullpathname.":");
-            if ($sub eq "CVS")
-            {
-                #print "rmdir $fullpathname\n";
-                rmdir $fullpathname;
-            }
-        }
-        else
-        {
-            unless (unlink $fullpathname) { die "Failed to delete $fullpathname\n"; }
-        }
-    }
-    closedir(DIR);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// Recurse through a directory hierarchy, looking for MANIFEST files.
-#// Currently unused.
-#//--------------------------------------------------------------------------------------------------
-
-sub ScanForManifestFiles($$$$)
-{
-    my($dir, $theme_root, $theme_name, $dist_dir) = @_;
-
-    opendir(DIR, $dir) or die "Cannot open dir $dir\n";
-    my @files = readdir(DIR);
-    closedir DIR;
-
-    my $file;
-
-    foreach $file (@files)
-    {    
-        my $filepath = $dir.":".$file;
-
-        if (-d $filepath)
-        {
-            # print "Looking for MANIFEST files in $filepath\n";        
-            ScanForManifestFiles($filepath, $theme_root, $theme_name, $dist_dir);
-        }
-        elsif ($file eq "MANIFEST")
-        {
-            # print "Doing manifest file $filepath\n";
-
-            # Get the dest path from the first line of the file
-
-            open(MANIFEST, $filepath) || die "Could not open file $file";
-            # Read in the path if available
-            my($dest_line) = <MANIFEST>;
-            chomp $dest_line;
-            close MANIFEST;
-
-            $dest_line =~ s|^#!dest[\t ]+|| || die "No destination line found in $filepath\n";
-
-            my($dest_path) = $dist_dir."chrome:skins:$theme_name:$dest_line";
-            # print " Destination is $dest_path\n";
-
-            InstallResources($filepath, "$dest_path", 0);
-        }
-    }
-}
-
-
-#-----------------------------------------------
-# SetupBuildLog
-#-----------------------------------------------
-sub SetupBuildLog($$)
-{
-    my($logfile_path, $timestamped_log) = @_;
-    
-    my($logdir) = "";
-    my($logfile) = $logfile_path;
-    
-    if ($logfile_path =~ /(.+?:)([^:]+)$/)       # ? for non-greedy match
-    {
-        $logdir = $1;
-        $logfile = $2;
-        
-        mkpath($logdir);
-    }
-    
-    if ($timestamped_log)
-    {
-        #Use time-stamped names so that you don't clobber your previous log file!
-        my $now = localtime();
-        while ($now =~ s@:@.@) {} # replace all colons by periods
-        OpenErrorLog("${logdir}${now}");
-    }
-    else
-    {
-        OpenErrorLog("${logdir}${logfile}");
-    }
-}
-
-#-----------------------------------------------
-# SetBuildNumber
-#-----------------------------------------------
-sub SetBuildNumber($$)
-{
-    my($build_num_file, $files_to_touch) = @_;
-
-    # Make sure we add the config dir to search, to pick up mozBDate.pm
-    # Need to do this dynamically, because this module can be used before
-    # mozilla/config has been checked out.
-    
-    my ($inc_path) = $0;        # $0 is the path to the parent script
-    $inc_path =~ s/:build:mac:build_scripts:.+$/:config/;
-    push(@INC, $inc_path);
-
-    require mozBDate;
-    
-    mozBDate::UpdateBuildNumber($build_num_file, $main::MOZILLA_OFFICIAL);
-   
-    my($file);
-    foreach $file (@$files_to_touch)
-    {
-        print "Writing build number to $file from ${file}.in\n";
-        mozBDate::SubstituteBuildNumber($file, $build_num_file, "${file}.in");
-    }
-}
-
-#-----------------------------------------------
-# SetTimeBomb
-#-----------------------------------------------
-sub SetTimeBomb($$)		
-{
-  my ($warn_days, $bomb_days) = @_;
-  
-  system("perl :mozilla:config:mac-set-timebomb.pl $warn_days $bomb_days");
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// Regenerate a configuration header file if necessary
-#//--------------------------------------------------------------------------------------------------
-sub UpdateConfigHeader($)
-{
-    my($config_path) = @_;
-    
-    my($config, $oldconfig) = ("", "");
-    my($define, $definevalue, $defines);
-    my($k, $l,);
-
-    foreach $k (keys(%main::options))
-    {
-        if ($main::options{$k})
-        {
-            foreach $l (keys(%{$main::optiondefines{$k}}))
-            {
-                $my::defines{$l} = $main::optiondefines{$k}{$l};
-                print "Setting up my::defines{$l}\n";
-            }
-        }
-    }
-
-    my $config_headerfile = current_directory().$config_path;
-    if (-e $config_headerfile)
-    {
-        open(CONFIG_HEADER, "< $config_headerfile") || die "$config_headerfile: $!\n";
-        my($line);
-        while ($line = <CONFIG_HEADER>)
-        {
-            if ($line =~ m/#define\s+([^\s]*)\s+([^\s]*)\s*\n/)
-            {
-                $define = $1;
-                $definevalue = $2;
-                
-                #canonicalize so that whitespace changes are not significant
-                my $canon_value = "#define " . $define . " " . $definevalue . "\n";
-                $oldconfig .= $canon_value;
-                
-                if (exists ($my::defines{$define}) and ($my::defines{$define} == $definevalue))
-                {
-                    delete $my::defines{$define};
-                    $config .= $canon_value;
-                }
-            }
-        }
-        close(CONFIG_HEADER);
-    }
-
-    if (%my::defines)
-    {
-        foreach $k (keys(%my::defines))
-        {
-            $config .= "#define " . $k . " " . $my::defines{$k} . "\n";
-        }
-    }
-
-    my $file_name = basename($config_headerfile);
-    if (($config ne $oldconfig) || (!-e $config_headerfile))
-    {
-        printf("Writing new configuration header $file_name\n");
-        open(CONFIG_HEADER, "> $config_headerfile") || die "$config_headerfile: $!\n";
-        print(CONFIG_HEADER "/* This file is auto-generated based on build options. Do not edit. */\n");
-        print CONFIG_HEADER ($config);
-        close(CONFIG_HEADER);
-
-        MacPerl::SetFileInfo("CWIE", "TEXT", $config_headerfile);
-    }
-    else
-    {
-        printf("Configuration header $file_name is up-to-date\n");
-    }
-}
-
-
-1;
-

mozilla/build/mac/build_scripts/Moz/CodeWarriorLib.pm

@@ -1,660 +0,0 @@
-#!perl
-package Moz::CodeWarriorLib;
-
-=pod
-
-=head1 NAME
-
-CodeWarriorLib - supply interface to CodeWarrior
-
-=head1 SYNOPSIS
-
-	#!perl
-	use CodeWarriorLib;
-	CodeWarriorLib::activate();
-	$had_errors = CodeWarriorLib::build_project(
-		$project_path, $target_name, $recent_errors_file, $clean_build
-	);
-
-=head1 DESCRIPTION
-
-Replaces the AppleScript library I<CodeWarriorLib>.
-
-=over 4
-
-=cut
-
-use strict;
-
-use Cwd;
-use File::Basename;
-
-use Mac::Types;
-use Mac::Events;
-use Mac::AppleEvents;
-use Mac::AppleEvents::Simple;
-use Mac::Processes;
-use Mac::MoreFiles;
-use Mac::StandardFile;
-
-
-use vars qw($VERSION);
-$VERSION = '1.02';
-
-my($app)  = 'CWIE';
-my($scriptDir) = cwd();         # could use $0 for this
-my($ide_loc_file) = "";
-
-# 0 == don't switch CWIE to front app in do_event(), 1 == do switch
-# note: activate() still switches when called
-$Mac::AppleEvents::Simple::SWITCH = 0;
-# $Mac::AppleEvents::Simple::WARN = 1;
-
-# supply your own path to the source here
-#_test('PowerPudgeIV:mozilla:mozilla:');
-
-# If you want to understand the gobbldeygook that's used to build Apple Events,
-# you should start by reading the AEGizmos documentation.
-
-=pod
-
-=item _get_project($full_path)
-
-A private routine returning a reference to the open project with the given name,
-or else the empty string (when that project is not open)
-
-full_path is a string identifying the project to be built and is of the form, 
-e.g., "HD:ProjectFolder:MyProject.mcp".  It must be supplied.
-
-=cut
-
-sub _get_project ($) {
-	my(
-		$full_path, $candidate_projects
-	) = @_;
-	$candidate_projects = _doc_named(basename($full_path, '*'));
-	if ($candidate_projects) {
-		my($cps) = _get_dobj($candidate_projects);
-		my($num) = AECountItems($cps);
-		if ($num) {  # is a list
-			foreach (1 .. AECountItems($cps)) {
-				my($cp) = AEGetNthDesc($cps, $_);
-				if (lc $full_path eq lc _full_path($cp)) {
-					return($cp);
-				}
-			}
-		} else {     # is only one, not a list
-			if (lc $full_path eq lc _full_path($cps)) {
-				return($cps);
-			}
-		}
-	}
-	return;
-}
-
-=pod
-
-=item build_project
-
-Build a selected target of a project, saving any errors to a file, if supplied.
-	
-full_path is a string identifying the project to be built and is of the form, 
-e.g., "HD:ProjectFolder:MyProject.mcp".  It must be supplied.
-
-If target_name is the empty string, the current target of the selected project 
-will be built, else, target_name should be a string matching a target name in 
-the selected project.
-	
-If error_path is the empty string, errors will not be saved to a file,
-else, error_path should be the full path of a file to save error messages into.
-
-=cut
-
-$CodeWarriorLib::CLOSE_PROJECTS_FIRST = 0; # If true we close then make. If false, make then close.
-my $last_project_built = "";
-my $last_project_was_closed = 0;
-
-sub build_project ($;$$$) {
-	my(
-		$full_path, $target_name, $error_path,
-		$remove_object, $p, $project_was_closed, $had_errors
-	) = @_;
-	_close_errors_window();
-
-	if ($CodeWarriorLib::CLOSE_PROJECTS_FIRST && ($last_project_built ne $full_path))
-	{
-		# If we're in "close first" mode, we don't close if the current project
-		# is the same as the previous one.
-		if ($last_project_was_closed) {
-			$p = _get_project($last_project_built);
-			_close($p);
-		}
-		$last_project_built = $full_path;
-		$last_project_was_closed = 0; # now refers to the new project
-	}
-	$project_was_closed = 0;
-	while (1) {
-		$p = _get_project($full_path);
-		if (!$p) {
-			if ($project_was_closed) {
-				print "### Error - request for project document failed after opening\n";
-				die "### possibly CW Pro 4 bug: be sure to close your Find window\n";
-			}
-			$project_was_closed = 1;
-			$last_project_was_closed = 1;
-			_open_file($full_path);
-		} else {
-			last;
-		}
-	}
-
-	$had_errors = 0;
-	if ($target_name eq '') {
-		if ($remove_object) {_remove_object($p)}
-		_build($p);
-	} else {
-		if ($remove_object) {_remove_object($p, $target_name)}
-		_build($p, $target_name);
-	}
-
-	if ($error_path ne '') {
-		_save_errors_window($error_path);
-	}
-	$had_errors = _close_errors_window();
-
-	if (!$CodeWarriorLib::CLOSE_PROJECTS_FIRST)
-	{
-		if ($project_was_closed) {
-			$p = _get_project($full_path);
-			_close($p);
-		}
-	}
-
-	return($had_errors);
-}
-
-=pod
-
-=item appIsRunning()
-
-=cut
-sub _appIsRunning($)
-{
-	my ($appSignature) = @_;
-	my ($psi);
-	my ($found) = 0;
-	my ($appPSN);
-
-	foreach $psi (values(%Process))
-	{
-		if ($psi->processSignature() eq $appSignature)
-		{
-			$appPSN = $psi->processNumber();
-			$found = 1;
-            last;
-		}
-	}
-	
-	return $found;
-}
-
-=pod
-
-=item appIsFrontmost()
-
-=cut
-sub _appIsFrontmost($)
-{
-	my ($appSignature) = @_;
-	my ($psi);
-	my ($found) = 0;
-	my ($appPSN);
-
-	foreach $psi (values(%Process))
-	{
-		if ($psi->processSignature() eq $appSignature)
-		{
-			$appPSN = $psi->processNumber();
-			$found = 1;
-            last;
-		}
-	}
-	
-	return (GetFrontProcess() == $appPSN);
-}
-
-
-=pod
-
-=item activate()
-
-Launches CodeWarrior and brings it to the front.
-
-Once found, path will be saved in $idepath_file for future reference.
-Edit or delete this file to change the location of the IDE.  If app is
-moved, C<activate()> will prompt for a new location.
-
-First looks for an open CodeWarrior app.  Second, tries to open previously
-saved location in ':idepath.txt'.  Third, tries to find it and allow user
-to choose it with Navigation Services (if present).  Fourth, uses good old
-GUSI routines built-in to MacPerl for a Choose Directory dialog box.
-
-=cut
-
-sub activate ($) {
-
-    $ide_loc_file = $_[0];     # save in global
-        
-	my($filepath, $appath, $psi) = ($ide_loc_file);
-
-	foreach $psi (values(%Process)) {
-		if ($psi->processSignature() eq $app) {
-			$appath = $psi->processAppSpec();
-			_save_appath($filepath, $appath);
-			last;
-		}
-	}
-
-	if (!$appath || !-x $appath) {
-		$appath = _read_appath($filepath);
-	}
-	
-	if (!$appath || ! -x $appath)
-	{
-		# make sure that MacPerl is a front process
-		#ActivateApplication('McPL');
-		MacPerl::Answer("Please locate the CodeWarrior application.", "OK");
-		
-		# prompt user for the file name, and store it
-		my $macFile = StandardGetFile( 0, "APPL");
-		if ( $macFile->sfGood() )
-		{
-			$appath = $macFile->sfFile();
-		}
-		else
-		{
-			die "Operation canceled\n";
-		}
-	
-#		if (eval {require Mac::Navigation}) {
-#			my($options, $nav);
-#			Mac::Navigation->import();
-#			$options = NavGetDefaultDialogOptions();
-#			$options->message('Where is CodeWarrior IDE?');
-#			$options->windowTitle('Find CodeWarrior IDE');
-#			$nav = NavChooseObject($Application{$app}, $options);
-#			die "CodeWarrior IDE not found.\n" if (!$nav || !$nav->file(1));
-#			$appath = $nav->file(1);
-#		} else {
-#			local(*D);
-#			my $cwd = `pwd`;
-#			$appath = _get_folder(
-#                               'Where is the CW IDE folder?',
-#				dirname($Application{$app})
-#			);
-#			die "CodeWarrior IDE not found.\n" if !$appath;
-#			opendir(D, $appath) or die $!;
-#			chdir($appath);
-#			foreach my $file (sort readdir (D)) {
-#				my(@app) = MacPerl::GetFileInfo($file);
-#				if ($app[0] && $app[1] &&
-#					$app[1] eq 'APPL' && $app[0] eq $app
-#				) {
-#					$appath .= $file;
-#					last;
-#				}
-#			}
-#			chomp($cwd);
-#			chdir($cwd);
-#		}
-		_save_appath($filepath, $appath);
-	}
-
-	my($lp) = LaunchParam->new(
-		launchAppSpec => $appath,
-		launchControlFlags => launchContinue() + launchNoFileFlags()
-	);
-	
-	unless (LaunchApplication($lp)) {
-		unlink($filepath);
-		die $^E;
-	}
-	
-	# wait for CodeWarrior to show up in the list of processes
-	while (!_appIsRunning('CWIE'))
-	{
-		WaitNextEvent();
-	}
-
-	# wait for CodeWarrior to come to the front
-	while (!_appIsFrontmost('CWIE'))
-	{
-		WaitNextEvent();
-	}
-}
-
-=pod
-
-=item getCodeWarriorPath()
-
-Returns a file path relative to the CodeWarrior folder
-
-=cut
-
-sub getCodeWarriorPath($)
-{
-    my($subfolder)=@_;
-    
-    my($app_path) = _read_appath($ide_loc_file);
-    if ($app_path eq "") { die "Error: Failed to get CodeWarrior IDE path\n"; }
-    
-    my($codewarrior_root) = $app_path;
-    $codewarrior_root =~ s/[^:]*$//;
-    return ($codewarrior_root . $subfolder);
-}
-
-
-=pod
-
-=item getCodeWarriorIDEName()
-
-Returns the name of the CodeWarrior application
-
-=cut
-
-sub getCodeWarriorIDEName()
-{
-    my($subfolder)=@_;
-
-    my($app_path) = _read_appath($ide_loc_file);
-    if ($app_path eq "") { die "Error: Failed to get CodeWarrior IDE path\n"; }
-
-    my(@codewarrior_path) = split(/:/, $app_path);
-    return pop(@codewarrior_path);
-}
-
-
-=pod
-
-=item quit()
-
-Quits CodeWarrior.
-
-=cut
-
-sub quit() {
-
-	$last_project_built = "";
-	$last_project_was_closed = 0;
-
-	my($evt) = do_event(qw/aevt quit/, $app);
-}
-
-
-sub _build ($;$) {
-	my($evt);
-	if ($_[1]) {
-		my($prm) =
-			q"'----':obj {form:name, want:type(TRGT), seld:TEXT(@), from:" .
-			AEPrint($_[0]) . '}';
-		$evt = do_event(qw/CWIE MAKE/, $app, $prm, $_[1]);
-	} else {
-		my($prm) = q"'----':" . AEPrint($_[0]);
-		$evt = do_event(qw/CWIE MAKE/, $app, $prm);
-	}
-}
-
-sub _remove_object ($;$) {
-	my($evt);
-	if ($_[1]) {
-		my($prm) =
-			q"'----':obj {form:name, want:type(TRGT), seld:TEXT(@), from:" .
-			AEPrint($_[0]) . '}';
-		$evt = do_event(qw/CWIE RMOB/, $app, $prm, $_[1]);
-	} else {
-		my($prm) = q"'----':" . AEPrint($_[0]);
-		$evt = do_event(qw/CWIE RMOB/, $app, $prm);
-	}
-}
-
-sub _open_file ($) {
-	my($prm) =
-		q"'----':obj {form:name, want:type(alis), " .
-		q"seld:TEXT(@), from:'null'()}";
-
-	do_event(qw/aevt odoc/, $app, $prm, $_[0]);
-}
-
-sub import_project ($$) {
-	my($xml_file, $project_path) = @_;
-	
-	my($prm) = "kocl:type(PRJD), rtyp:TEXT(@), data:TEXT(@), &subj:'null'()";
-	
-	my($evt) = do_event(qw/core crel/, $app, $prm, $project_path, $xml_file);    
-	my($result) = _get_event_result($evt);
-	
-	if ($result eq "") {
-		_close(_get_project($project_path));
-	}
-	return $result;
-}
-
-sub export_project ($$) {
-	my($project_path, $xml_out_path) = @_;
-	my($p, $project_was_closed);
-	
-	$project_was_closed = 0;
-	while (1) {
-		$p = _get_project($project_path);
-		if (!$p) {
-			if ($project_was_closed) {
-				print "### Error - request for project document failed after opening\n";
-				die "### possibly CW bug: be sure to close your Find window\n";
-}
-			$project_was_closed = 1;
-			_open_file($project_path);
-		} else {
-			last;
-		}
-	}
-
-    # avoid problems with the Project Messages window
-    _close_named_window("Project Messages");
-    
-	my($prm) =
-		q"'----':obj {form:indx, want:type(PRJD), " .
-		q"seld:1, from:'null'()}, kfil:TEXT(@)";
-
-	my($evt) = do_event(qw/CWIE EXPT/, $app, $prm, $xml_out_path);    
-	
-	if ($project_was_closed) {
-		$p = _get_project($project_path);
-		_close($p);
-	}
-	
-	return _get_event_result($evt);
-}
-
-sub _doc_named ($) {
-	my($prm) =
-		q"'----':obj {form:test, want:type(docu), from:'null'(), " .
-		q"seld:cmpd{relo:'=   ', 'obj1':obj {form:prop, want:type" .
-		q"(prop), seld:type(pnam), from:'exmn'()}, 'obj2':TEXT(@)}}";
-
-	my($evt) = do_event(qw/core getd/, $app, $prm, $_[0]);
-	return($evt->{REPLY} eq 'aevt\ansr{}' ? undef : $evt);
-}
-
-sub _full_path ($) {
-	my($obj) = $_[0];
-	my($prm) =
-		q"'----':obj {form:prop, want:type(prop), seld:type(FILE), " .
-		q"from:" . AEPrint($_[0]) . q"}, rtyp:type(TEXT)";
-	my($evt) = do_event(qw/core getd/, $app, $prm);
-
-	return MacPerl::MakePath(
-		MacUnpack('fss ', (
-			AEGetParamDesc($evt->{REP}, keyDirectObject()))->data()->get()
-		)
-	);
-}
-
-sub _save_errors_window ($) {
-	my($prm) = 
-		q"'----':obj {form:name, want:type(alis), seld:TEXT(@), from:'null'()}";
-	do_event(qw/MMPR SvMs/, $app, $prm, $_[0]);
-}
-
-
-sub _close_errors_window () {
-    return _close_named_window('Errors & Warnings');
-}
-
-
-sub _close_named_window ($) {
-    my($window_name) = @_;
-    
-	my($prm) =
-		q"'----':obj {form:name, want:type(cwin), " .
-		q"seld:TEXT(@), from:'null'()}";
-
-	my($evt) = do_event(qw/core clos/, $app, $prm, $window_name);
-	return($evt->{REPLY} eq 'aevt\ansr{}' ? 1 : 0);
-}
-
-sub _close () {
-	my($prm) = q"'----':" . AEPrint($_[0]);
-	do_event(qw/core clos/, $app, $prm);
-}
-
-sub _get_dobj ($) {
-	return(AEGetParamDesc($_[0]->{REP}, keyDirectObject()));
-}
-
-sub _get_folder ($$) {
-    require 'GUSI.ph';
-    my($prompt, $default) = @_;
-    MacPerl::Choose(
-        GUSI::AF_FILE(), 0, $prompt, '',
-        GUSI::CHOOSE_DIR() + ($default ? &GUSI::CHOOSE_DEFAULT : 0),
-        $default
-    );
-}
-
-sub _get_event_result ($)
-{
-    my($evt) = @_;
-
-    my($result) = $evt->{ERROR};
-    
-    if ( $result eq "" && $evt->{ERRNO} != 0 )
-    {
-        $result = "unknown error (".$evt->{ERRNO}.")";
-    }
-    
-    return $result;
-}
-
-
-sub _save_appath ($$) {
-
-	my($cwd) = cwd();	# remember the current working dir
-	chdir($scriptDir);	# change dir to the script dir
-
-	local(*F);
-	open(F, '>' . $_[0]) or die $!;
-	print F $_[1];
-	close(F);
-		
-	chdir($cwd);		# restore the cwd
-}
-
-sub _read_appath ($) {
-
-	my($filepath) = @_;
-
-	my($cwd) = cwd();	# remember the current working dir
-	chdir($scriptDir);	# change dir to the script dir
-	
-	if (! -e $filepath) {
-		return "";
-	}
-
-	local(*F);
-	open(F, $filepath);
-	my($appath) = <F>;
-	close(F);
-		
-	chdir($cwd);		# restore the cwd
-	return($appath);
-}
-
-
-sub _test ($) {
-	activate($ide_loc_file);
-	my($path) = $_[0];
-	build_project(
-	  "${path}modules:xml:macbuild:XML.mcp", '',
-	  "${path}build:mac:Mozilla.BuildLog.part"
-	);
-}
-
-1;
-
-=pod
-
-=back
-
-=head1 HISTORY
-
-=over 4
-
-=item v1.02, September 23, 1998
-
-Made fixes in finding and saving location of CodeWarrior IDE.
-
-=item v1.01, June 1, 1998
-
-Made fixes to C<chdir()> in C<activate()>, made C<activate()> more robust 
-in finding CodeWarrior IDE, added global variable to NOT switch to IDE
-for each sent event, a few other fixes.
-
-=item v1.00, May 30, 1998
-
-First shot
-
-=back
-
-
-=head1 AUTHORS
-
-Chris Nandor F<E<lt>pudge@pobox.comE<gt>>, and the author of the
-original I<CodeWarriorLib>, Scott Collins F<E<lt>scc@netscape.comE<gt>>.
-
-=head1 SEE ALSO
-
-BuildProject L<Moz>.
-
-=head1 COPYRIGHT
-
-The contents of this file are subject to the Netscape Public
-License Version 1.1 (the "License"); you may not use this file
-except in compliance with the License. You may obtain a copy of
-the License at http://www.mozilla.org/NPL/
-
-Software distributed under the License is distributed on an "AS
-IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-implied. See the License for the specific language governing
-rights and limitations under the License.
-
-The Original Code is Mozilla Communicator client code, released
-March 31, 1998.
-
-The Initial Developer of the Original Code is Netscape
-Communications Corporation. Portions created by Netscape are
-Copyright (C) 1998-1999 Netscape Communications Corporation. All
-Rights Reserved.
-
-Contributor(s): 
-
-=cut

mozilla/build/mac/build_scripts/Moz/Jar.pm

@@ -1,576 +0,0 @@
-#!perl -w
-package Moz::Jar;
-
-#
-# Module for creating jar files, either using a jar manifest, or
-# simply jarring up folders on disk.
-#
-
-require 5.004;
-require Exporter;
-
-use strict;
-use Archive::Zip;
-use File::Path;
-
-use Mac::Files;
-
-use Moz::Moz;
-
-use vars qw( @ISA @EXPORT );
-
-@ISA        = qw(Exporter);
-@EXPORT     = qw(
-                    CreateJarFileFromDirectory
-                    CreateJarFromManifest
-                    WriteOutJarFiles
-                    SanityCheckJarOptions
-                );
-
-
-#-------------------------------------------------------------------------------
-# Add the contents of a directory to the zip file
-#
-#-------------------------------------------------------------------------------
-sub _addDirToJar($$$$)
-{
-    my($dir, $jar_root, $zip, $compress) = @_;
-
-    opendir(DIR, $dir) or die "Error: Cannot open dir $dir\n";
-    my @files = readdir(DIR);
-    closedir DIR;
-    
-    my $unix_jar_root = $jar_root;
-    $unix_jar_root =~ s|:|/|g;       # colon to slash conversion
-    
-    my $file;
-    
-    foreach $file (@files)
-    {        
-        my $filepath = $dir.":".$file;
-        
-        if (-d $filepath)
-        {
-            print "Adding files to jar from $filepath\n";            
-            _addDirToJar($filepath, $jar_root, $zip, $compress);
-        }
-        else
-        {
-            my $member = Archive::Zip::Member->newFromFile($filepath);
-            die "Error: Failed to create zip file member $filepath\n" unless $member;
-            
-            my $unixName = $filepath;
-            $unixName =~ s|:|/|g;               # colon to slash conversion
-            $unixName =~ s|^$unix_jar_root||;   # relativise
-            
-            $member->fileName($unixName);
-            
-            # print "Adding $file as $unixName\n";
-            
-            if ($compress) {
-                $member->desiredCompressionMethod(Archive::Zip::COMPRESSION_DEFLATED);            
-            } else {
-                $member->desiredCompressionMethod(Archive::Zip::COMPRESSION_STORED);
-            }
-            
-            $zip->addMember($member);
-        }
-    }
-}
-
-#-------------------------------------------------------------------------------
-# Add the contents of a directory to the zip file
-#
-#-------------------------------------------------------------------------------
-
-sub CreateJarFileFromDirectory($$$)
-{
-    my($srcdir, $jarpath, $compress) = @_;
-
-    my $zip = Archive::Zip->new();
-
-    _addDirToJar($srcdir, $srcdir, $zip, $compress);
-
-    print "Saving zip file...\n";
-    my $status = $zip->writeToFileNamed($jarpath);
-    if ($status == 0) {
-        print "Zipping completed successfully\n";
-    } else {
-        print "Error saving zip file\n";
-    }
-    
-    # set the file type/creator to something reasonable
-    MacPerl::SetFileInfo("ZIP ", "ZIP ", $jarpath);
-}
-
-
-#-------------------------------------------------------------------------------
-# printZipContents
-# 
-#-------------------------------------------------------------------------------
-sub printZipContents($)
-{
-    my($zip) = @_;
-
-    my(@members) = $zip->memberNames();
-    
-    print "Zip contains:\n";
-    
-    my($member);
-    foreach $member (@members)
-    {
-        print "  $member\n";
-    }
-}
-
-
-#-------------------------------------------------------------------------------
-# safeSaveJarFile
-# 
-# Archive::Zip has a problem where you cannot save a zip file on top of
-# an existing zip file that it has open, because it holds references
-# into that zip. So we have to save to a temp file, then do a swap.
-# 
-# Note that the zip will become invalid after this operation.
-# If you want to do further operations on it, you'll have to reread it.
-#-------------------------------------------------------------------------------
-sub safeSaveJarFile($$)
-{
-    my($zip, $full_dest_path) = @_;
-    
-    my($temp_file_name) = $full_dest_path."_temp";
-
-    ($zip->writeToFileNamed($temp_file_name) == Archive::Zip::AZ_OK) || die "Error: died writing jar to temp file $temp_file_name\n";
-    
-    unlink $full_dest_path;
-    
-    (rename $temp_file_name, $full_dest_path) || die "Error: Failed to rename $temp_file_name\n";
-    
-    MacPerl::SetFileInfo("ZIP ", "ZIP ", $full_dest_path);
-}
-
-
-#-------------------------------------------------------------------------------
-# addToJarFile
-# 
-# Add a file to a jar file
-#
-# Parameters:
-#   1. Jar ID. Unix path of jar file inside chrome.
-#   2. Abs path to jar.mn file (i.e. source)    (mac breaks)
-#   3. File source, relative to jar.mn path     (mac breaks)
-#   4. Abs path to the resulting .jar file      (mac breaks)
-#   5. Relative file path within the jar        (unix breaks)
-#   6. Reference to hash of jar files
-#
-#-------------------------------------------------------------------------------
-
-sub addToJarFile($$$$$$$)
-{
-    my($jar_id, $jar_man_dir, $file_src, $jar_path, $file_jar_path, $override, $jars) = @_;
-
-    # print "addToJarFile with:\n  $jar_man_dir\n  $file_src\n  $jar_path\n  $file_jar_path\n";
-
-    unless ($jar_path =~ m/(.+:)([^:]+)$/) { die "Error: Bad jar path $jar_path\n"; }
-    
-    my($target_dir) = $1;
-    my($jar_name) = $2;
-
-    $target_dir =~ s/[^:]+$//;
-    
-    # print "¥ $target_dir $jar_name\n";
-
-    # find the source file
-    my($src) = $jar_man_dir.":".$file_src;
-    if ((!-e $src) && ($file_src =~ m/.+:([^:]+)$/))    # src does not exist. Fall back to looking for src in jar.mn dir
-    {
-        $file_src = $1;
-        $src = $jar_man_dir.":".$file_src;
-        
-        if (!-e $src) {
-            die "Error: Can't find chrome file $src\n";
-        }
-    }
-    
-    if ($main::options{chrome_jars})
-    {
-        my($zip) = $jars->{$jar_id};
-        unless ($zip) { die "Error: Can't find Zip entry for $jar_id\n"; }
-        
-        # print "Adding $file_src to jar file $jar_path at $file_jar_path\n";
-        my($member) = Archive::Zip::Member->newFromFile($src);
-        unless ($member) { die "Error: Failed to create zip file member $src\n"; }
-
-        $member->fileName($file_jar_path);    
-    
-        my($compress) = 1;
-        if ($compress) {
-            $member->desiredCompressionMethod(Archive::Zip::COMPRESSION_DEFLATED);            
-            $member->desiredCompressionLevel(Archive::Zip::COMPRESSION_LEVEL_DEFAULT);   # defaults to 6
-        } else {
-            $member->desiredCompressionMethod(Archive::Zip::COMPRESSION_STORED);
-        }
-
-        my($old_member) = $zip->memberNamed($file_jar_path);
-        
-        if ($override)
-        {
-            if ($old_member)
-            {
-                # print "Overriding $file_jar_path in jar file $jar_id\n";
-                # need to compare mod dates or use the + here
-                $zip->removeMember($old_member);
-            }
-        
-            $zip->addMember($member);
-        }
-        else
-        {
-            if ($old_member)
-            {
-                #compare dates here
-                my($member_moddate) = $old_member->lastModTime();
-                my($file_moddate) = GetFileModDate($src);
-            
-                if ($file_moddate > $member_moddate)
-                {
-                    print "Updating older file $file_jar_path in $jar_id\n";
-                    $zip->removeMember($old_member);
-                    $zip->addMember($member);
-                }
-                else
-                {
-                    print "File $file_jar_path in $jar_id is more recent. Not updating.\n";
-                }
-            }
-            else
-            {
-                $zip->addMember($member);
-            }
-        }
-    }
-    
-    if ($main::options{chrome_files})  # we install raw files too
-    {
-        my($rel_path) = $file_jar_path;
-        $rel_path =~ s|/|:|g;       # slash to colons
-        
-        my($dir_name) = $jar_name;
-        $dir_name =~ s/\.jar$//;
-        
-        my($dst) = $target_dir.$dir_name.":".$rel_path;
-                
-        # print "Aliassing $src\n to\n$dst\n";        
-        if ($override)
-        {
-            unlink $dst;
-        MakeAlias($src, $dst);      # don't check errors, otherwise we fail on replacement
-    }
-        else
-        {
-            if (-e $dst)
-            {
-                #compare dates here
-                my($dst_moddate) = GetFileModDate($dst);
-                my($file_moddate) = GetFileModDate($src);
-            
-                if ($file_moddate > $dst_moddate)
-                {
-                    print "Updating older file $rel_path in $dir_name\n";
-                    unlink $dst;
-                    MakeAlias($src, $dst);
-                }
-                else
-                {
-                    print "File $file_jar_path in $jar_id is more recent. Not updating.\n";
-                }
-            
-            }
-            else
-            {
-                MakeAlias($src, $dst);
-            }
-        }
-        
-    }
-}
-
-
-#-------------------------------------------------------------------------------
-# setupJarFile
-# 
-# setup a zip for writing
-#-------------------------------------------------------------------------------
-
-sub setupJarFile($$$)
-{
-    my($jar_id, $dest_path, $jar_hash) = @_;
-
-    # print "Creating jar file $jar_id at $jar_path\n";
-    
-    my($jar_file) = $jar_id;
-    $jar_file =~ s|/|:|g;           # slash to colons
-    my($full_jar_path) = full_path_to($dest_path.":".$jar_file);
-
-    if ($main::options{chrome_jars})
-    {
-        my($zip) = $jar_hash->{$jar_id};
-        if (!$zip)      # if we haven't made it already, do so
-        {
-	        my($zip) = Archive::Zip->new();
-	        $jar_hash->{$jar_id} = $zip;
-
-            # does the jar file exist already? If so, read it in
-            if (-e $full_jar_path)
-            {
-                print "Reading in jar file $jar_id\n";
-                if ($zip->read($full_jar_path) != Archive::Zip::AZ_OK) { die "Error: Failed to re-read $full_jar_path\n"; }
-                
-                # printZipContents($zip);
-            }
-
-        }
-    }
-    else
-    {
-        # installing files.
-        # nothing to do. MakeAlias creates dirs as needed.
-
-	    # add this jar to the list
-	    $jar_hash->{$jar_id} = 1;
-    }
-}
-
-
-#-------------------------------------------------------------------------------
-# closeJarFile
-# 
-# We're done with this jar file _for this jar.mn_. We may add more entries
-# to it later, so keep it open in the hash.
-#-------------------------------------------------------------------------------
-sub closeJarFile($$)
-{
-    my($jar_path, $jar_hash) = @_;
-
-    # print "Closing jar file $jar_path\n";
-
-    if ($main::options{chrome_jars})
-    {
-    
-    }
-    else
-    {
-        # installing files.
-        # nothing to do
-    }
-}
-
-
-#-------------------------------------------------------------------------------
-# WriteOutJarFiles
-# 
-# Now we dump out the jars
-#-------------------------------------------------------------------------------
-sub WriteOutJarFiles($$)
-{
-    my($chrome_dir, $jars) = @_;
-
-    unless ($main::options{chrome_jars}) { return; }
-    
-    my($full_chrome_path) = full_path_to($chrome_dir);
-
-    my($key);
-    foreach $key (keys %$jars)
-    {
-        my($zip) = $jars->{$key};
-        
-        my($rel_path) = $key;
-        $rel_path =~ s/\//:/g;
-        
-        my($output_path) = $full_chrome_path.":".$rel_path;
-        
-        print "Writing zip file $key to $output_path\n";
-
-        # ensure the target dirs exist
-        my($path) = $output_path;
-        $path =~ s/[^:]+$//;
-        mkpath($path);
-        
-        # unlink $output_path;        # remove any existing jar
-        safeSaveJarFile($zip, $output_path);
-        # $zip is invalid after this operation, so nuke it here
-        $jars->{$key} = 0;
-    }
-}
-
-
-#-------------------------------------------------------------------------------
-# registerChromePackage
-# 
-# Enter a chrome package into the installed-chrome.txt file
-#-------------------------------------------------------------------------------
-sub registerChromePackage($$$$$$)
-{
-    my($jar_file, $file_path, $chrome_dir, $jar_hash, $chrome_type, $pkg_name) = @_;
-
-    my($manifest_subdir) = $jar_file;
-    $manifest_subdir =~ s/:/\//g;
-    
-    if (index($manifest_subdir, "-unix") == -1 && index($manifest_subdir, "-win") == -1) {
-
-    my($chrome_entry);
-    
-    if ($main::options{use_jars}) {
-        $chrome_entry = "$chrome_type,install,url,jar:resource:/chrome/$manifest_subdir!/$chrome_type/$pkg_name";
-    } else {
-        $manifest_subdir =~ s/\.jar$//;
-        $chrome_entry = "$chrome_type,install,url,resource:/chrome/$manifest_subdir/$chrome_type/$pkg_name";
-    }
-
-    # print "Entering $chrome_entry in installed-chrome.txt\n";
-    
-    # ensure chrome_dir exists
-    mkpath($chrome_dir);
-    
-    my($inst_chrome) = ${chrome_dir}.":installed-chrome.txt";
-    
-    if (open(CHROMEFILE, "<$inst_chrome")) {
-        while (<CHROMEFILE>) {
-            chomp;
-            if ($_ eq $chrome_entry) {
-                # $chrome_entry already appears in installed-chrome.txt file
-                # just update the mod date
-                my $now = time;
-                utime($now, $now, $inst_chrome) || die "Error: Couldn't touch $inst_chrome";
-                print "+++ updating chrome $inst_chrome\n+++\t\t$chrome_entry\n";
-                close(CHROMEFILE) || die "Error: can't close $inst_chrome: $!";
-                return 0;
-            }
-        }
-        close(CHROMEFILE) || die "Error: can't close $inst_chrome: $!";
-    }
-    open(CHROMEFILE, ">>${inst_chrome}") || die "Error: Failed to open $inst_chrome\n";
-    print(CHROMEFILE "${chrome_entry}\n");
-    close(CHROMEFILE) || die "Error: Failed to close $inst_chrome\n";
-    print "+++ adding chrome $inst_chrome\n+++\t\t$chrome_entry\n";
-  }
-}
-
-#-------------------------------------------------------------------------------
-# Create or add to a jar file from a jar.mn file.
-# Both arguments are relative to the mozilla root dir.
-#
-#
-#-------------------------------------------------------------------------------
-sub CreateJarFromManifest($$$)
-{
-    my($jar_man_path, $dest_path, $jars) = @_;
-    
-    if ($main::options{chrome_jars}) {
-        print "Jarring from $jar_man_path\n";
-    }
-    if ($main::options{chrome_files}) {
-        print "Installing files from $jar_man_path\n";
-    }
-
-    $jar_man_path = full_path_to($jar_man_path);
-    $dest_path = full_path_to($dest_path);
-
-    # if the jars hash is empty, nuke installed-chrome.txt
-    if (! scalar(%$jars))
-    {
-        print "Nuking installed-chrome.txt\n";
-	    my($installed_chrome) = $dest_path.":installed-chrome.txt";
-	    # unlink $installed_chrome;
-    }
-    
-    my $jar_man_dir = "";
-    my $jar_man_file = "";
-    
-    if ($jar_man_path =~ /(.+):([^:]+)$/)
-    {
-        $jar_man_dir = $1;      # no trailing :
-        $jar_man_file = $2;
-    }
-
-    # Keep a hash of jar files, keyed on relative jar path (e.g. "packages/core.jar")
-    # Entries are open Archive::Zips (if zipping), and installed-chrome entries.
-    
-    my($jar_id) = "";       # Current foo/bar.jar from jar.mn file
-    my($jar_file) = "";     # relative path to jar file (from $dest_path), with mac separators
-    my($full_jar_path);
-    
-    open(FILE, "<$jar_man_path") || die "Error: could not open \"$jar_man_path\": $!";
-    while (<FILE>)
-    {
-        my($line) = $_;
-        chomp($line);
-        
-        # print "$line\n";
-        
-        if ($line =~ /^\s*\#.*$/) {     # skip comments
-            next;
-        }
-        
-        if ($line =~/^([\w\d.\-\_\\\/]+)\:\s*$/)                                  # line start jar file entries
-        {
-            $jar_id = $1;
-            $jar_file = $jar_id;
-            $jar_file =~ s|/|:|g;           # slash to colons
-            $full_jar_path = $dest_path.":".$jar_file;
-                        
-            setupJarFile($jar_id, $dest_path, $jars);
-
-        }
-        elsif ($line =~ /^(\+?)\s+([\w\d.\-\_\\\/]+)\s*(\([\w\d.\-\_\\\/]+\))?$\s*/)     # jar file entry
-        {
-            my($override) = ($1 eq "+");
-            my($file_dest) = $2;
-            my($file_src) = $3;
- 
-            if ($file_src) {  
-                $file_src = substr($file_src, 1, -1);      #strip the ()
-            } else {
-                $file_src = $file_dest;
-            }
-            
-            $file_src =~ s|/|:|g;
-            
-            if ($jar_file ne "")    # if jar is open, add to jar
-            {
-                if ($file_dest =~ /([\w\d.\-\_]+)\/([\w\d.\-\_\\\/]+)contents.rdf/)
-                {
-                    my $chrome_type = $1;
-                    my $pkg_name = $2;
-                    registerChromePackage($jar_file, $file_dest, $dest_path, $jars, $chrome_type, $pkg_name);
-                }
-                
-                addToJarFile($jar_id, $jar_man_dir, $file_src, $full_jar_path, $file_dest, $override, $jars);
-            }
-            else
-            {
-                die "Error: bad jar.mn format at $line\n";
-            }
-        }
-        elsif ($line =~ /^\s*$/ )                                               # blank line
-        {
-            if ($jar_file ne "")    #if a jar file is open, close it
-            {
-                closeJarFile($full_jar_path, $jars);
-                
-                $jar_file = "";
-                $full_jar_path = "";
-            }
-        }
-    }
-    
-    close(FILE);
-
-    if ($jar_file ne "")    #if a jar file is open, close it
-    {
-        closeJarFile($full_jar_path, $jars);
-    }
-
-}
-
-1;

mozilla/build/mac/build_scripts/Moz/MacCVS.pm

@@ -1,228 +0,0 @@
-#!perl -w
-package Moz::MacCVS;
-
-# package Mac::Apps::MacCVS; this should really be the name of the package
-# but due to our directory hierarchy in mozilla, I am not doing it
-
-require 5.004;
-require Exporter;
-
-use strict;
-use Exporter;
-
-use vars qw($VERSION @ISA @EXPORT);
-
-use Cwd;
-
-use File::Basename;
-
-use Mac::StandardFile;
-use Mac::AppleEvents;
-use Mac::AppleEvents::Simple;
-
-@ISA        = qw(Exporter);
-@EXPORT     = qw(new describe checkout update);
-$VERSION = "1.00";
-
-# If you want to understand the gobbldeygook that's used to build Apple Events,
-# you should start by reading the AEGizmos documentation.
-
-
-# Architecture:
-# cvs session object:
-# name - session name
-# session_file - session file
-# 
-# 
-
-my($last_error) = 0;
-my($gAppSig)    = 'Mcvs';   # MacCVS Pro
-
-#
-# utility routines
-#
-
-
-sub _checkForEventError($)
-{
-  my($evt) = @_;
-
-  if ($evt->{ERRNO} != 0)
-  {
-    print STDERR "Error. Script returned '$evt->{ERROR} (error $evt->{ERRNO})\n";
-    $last_error = $evt->{ERRNO};
-    return 0;
-  }
-  
-  return 1; # success
-}
-
-
-#
-# Session object methods
-#
-
-sub new
-{
-  my ( $proto, $session_file) = @_;
-  my $class = ref($proto) || $proto;
-  my $self = {};
-
-  if ( defined($session_file) && ( -e $session_file) )
-  {
-    $self->{"name"} = basename( $session_file );
-    $self->{"session_file"} = $session_file;
-    bless $self, $class;
-    return $self;
-  }
-  else
-  {
-    print STDERR "MacCVS->new cvs file < $session_file > does not exist\n";
-    return;
-  }
-}
-
-# makes sure that the session is open
-# assertSessionOpen()
-# returns 1 on success
-sub assertSessionOpen()
-{
-  my ($self) = shift;
-
-  $last_error = 0;
-
-  my($prm) =
-    q"'----':obj {form:name, want:type(alis), seld:TEXT(@), from:'null'()}";
-
-  my($evt) = do_event(qw/aevt odoc/, $gAppSig, $prm, $self->{session_file});
-  return _checkForEventError($evt);
-}
-
-# prints the cvs object, used mostly for debugging
-sub describe
-{
-  my($self) = shift;
-  $last_error = 0;
-  print "MacCVS:: name: ", $self->{name}, " session file: ", $self->{session_file}, "\n";
-}
-
-# checkout( self, module, revision, date)
-# MacCVS checkout command
-# returns 1 on success.
-sub checkout()
-{
-  my($self, $module, $revision, $date ) = @_;
-  unless( defined ($module) ) { $module = ""; } # get rid of the pesky undefined warnings
-  unless( defined ($revision) ) { $revision = ""; }
-  unless( defined ($date) ) { $date = ""; }
-
-  $last_error = 0;
-    
-  $self->assertSessionOpen() || die "Error: failed to open MacCVS session file at $self->{session_file}\n";
-  
-  my($revstring) = ($revision ne "") ? $revision : "(none)";
-  my($datestring) = ($date ne "") ? $date : "(none)";
-  
-  print "Checking out $module with revision $revstring, date $datestring\n";
-
-  my($prm) =
-    q"'----':obj {form:name, want:type(docu), seld:TEXT(@), from:'null'()}, ".
-    q"modl:'TEXT'(@), tagr:'TEXT'(@), tagd:'TEXT'(@) ";
-  
-  my($evt) = do_event(qw/MCvs cout/, $gAppSig, $prm, $self->{name}, $module, $revision, $date);
-  return _checkForEventError($evt);
-}
-
-
-# update( self, branch tag, list of paths)
-# MacCVS udate command
-# returns 1 on success.
-# NOTE: MacCVS Pro does not correctly support this stuff yet (as of version 2.7d5).
-sub update()
-{
-  my($self, $branch, $paths ) = @_;
-
-  $last_error = 0;
-    
-  $self->assertSessionOpen() || die "Error: failed to open MacCVS session file at $self->{session_file}\n";
-
-  if ($branch eq "HEAD") {
-    $branch = "";
-  }
-  
-  my($paths_list) = "";
-  
-  my($path);
-  foreach $path (@$paths)
-  {
-    if ($paths_list ne "") {
-      $paths_list = $paths_list.", ";
-    }
-    
-    $paths_list = $paths_list."Ò".$path."Ó";
-  }
-    
-  my($prm) =
-    q"'----':obj {form:name, want:type(docu), seld:TEXT(@), from:'null'()}, ".
-    q"tagr:'TEXT'(@), tFls:[";
-
-  $prm = $prm.$paths_list."]";
-    
-  my($evt) = do_event(qw/MCvs updt/, $gAppSig, $prm, $self->{name}, $branch);
-  return _checkForEventError($evt);
-};
-
-
-sub getLastError()
-{
-  return $last_error;
-}
-
-1;
-=pod
-
-=head1 NAME
-
-MacCVS - Interface to MacCVS
-
-=head1 SYNOPSIS
-
-  use MacCVS;
-  $session = MacCVS->new( <session_file_path>) || die "cannot create session";
-  $session->checkout([module] [revision] [date]) || die "Could not check out";
-    
-=head1 DESCRIPTION
-
-This is a MacCVS interface for talking to MacCVS Pro client.
-MacCVSSession is the class used to manipulate the session
-
-=item new
-  MacCVS->new( <cvs session file path>);
-  
-  Creates a new session. Returns undef on failure.
-
-=item checkout( <module> [revision] [date] )
-
-  cvs checkout command. Revision and date are optional
-  returns 0 on failure
-  
-=cut
-
-=head1 SEE ALSO
-
-=over
-
-=item MacCVS Home Page
-
-http://www.maccvs.org/
-
-=back 
-
-=head1 AUTHORS
-
-Aleks Totic atotic@netscape.com
-Simon Fraser sfraser@netscape.com
-
-=cut
-
-__END__

mozilla/build/mac/build_scripts/Moz/Moz.pm

@@ -1,603 +0,0 @@
-=head1 NAME
-
-B<Moz> - routines for automating CodeWarrior builds, and some extra-curricular
-activities related to building Mozilla
-
-=head1 SYNOPSIS
-
-    use Moz;
-
-    OpenErrorLog(":::BuildLog");
-    StopForErrors();
-
-		$Moz::QUIET = 1;
-		InstallFromManifest(":projects:MANIFEST", $dist_dir);
-
-    BuildProjectClean(":projects:SomeProject.mcp", "SomeTarget");
-    MakeAlias(":projects:SomeProject.shlb", $dist_dir);
-
-    DontStopForErrors();
-
-    BuildProject(":projects:SomeOtherProject.mcp", "SomeTarget");
-
-=head1 DESCRIPTION
-
-B<Moz> comprises the routines needed to slap CodeWarrior around, force it
-to build a sequence of projects, report the results, and a few other things.
-This module should only contain functions that are generic to any build,
-not just the Mozilla build.
-
-=cut
-
-
-package			Moz::Moz;
-require			Exporter;
-
-use Cwd;
-
-use File::Copy;
-use File::Path;
-use File::Basename;
-
-use Mac::Types;
-use Mac::Events;
-use Mac::Processes;
-
-use ExtUtils::Manifest 'maniread';
-
-use Moz::CodeWarriorLib;
-
-@ISA				= qw(Exporter);
-
-@EXPORT			= qw( LaunchCodeWarrior
-                  GetCodeWarriorRelativePath
-                  current_directory
-                  full_path_to
-                  DoBuildProject
-                  ImportXMLProject
-                  ExportProjectToXML
-                  OpenErrorLog
-                  MakeAlias
-                  GetFileModDate
-                  StopForErrors
-                  DontStopForErrors
-                  InstallFromManifest
-                  InstallResources
-                  RedirectOutputToFile
-                  Delay
-                  ActivateApplication
-                  IsProcessRunning);
-
-@EXPORT_OK	= qw(CloseErrorLog QUIET);
-
-
-sub current_directory()
-	{
-		my $current_directory = cwd();
-		chop($current_directory) if ( $current_directory =~ m/:$/ );
-		return $current_directory;
-	}
-
-sub full_path_to($)
-	{
-		my ($path) = @_;
-		if ( $path =~ m/^[^:]+$/ )
-			{
-				$path = ":" . $path;
-			}
-
-		if ( $path =~ m/^:/ )
-			{
-				$path = current_directory() . $path;
-			}
-
-		return $path;
-	}
-
-$logging								= 0;
-$recent_errors_file			= "";
-$stop_on_1st_error			= 1;
-$QUIET									= 0;
-
-
-
-=head2 Logging all the errors and warnings - C<OpenErrorLog($log_file)>, C<CloseErrorLog()>
-
-The warnings and errors generated in the course of building projects can be logged to a file.
-Tinderbox uses this facility to show why a remote build failed.
-
-Logging is off by default.
-  Start logging at any point in your build process with C<OpenErrorLog($log_file)>.
-  Stop with C<CloseErrorLog()>.
-  You never need to close the log explicitly, unless you want to just log a couple of projects in the middle of a big list.
-  C<CloseErrorLog()> is not exported by default. 
-
-=cut
-
-sub CloseErrorLog()
-	{
-		if ( $logging )
-			{
-				close(ERROR_LOG);
-				$logging = 0;
-				StopForErrors() if $stop_on_1st_error;
-			}
-	}
-
-
-
-sub OpenErrorLog($)
-	{
-		my ($log_file) = @_;
-
-		CloseErrorLog();
-		if ( $log_file )
-			{
-				$log_file = full_path_to($log_file);
- 
-				open(ERROR_LOG, ">$log_file") || die "Error: Can't open $log_file\n";
-				MacPerl::SetFileInfo("CWIE", "TEXT", $log_file);
-
-				$log_file =~ m/.+:(.+)/;
-				$recent_errors_file = full_path_to("$1.part");
-				$logging = 1;
-			}
-	}
-
-
-=head2 Stopping before it's too late - C<StopForErrors()>, C<DontStopForErrors()>
-
-When building a long list of projects, you decide whether to continue building subsequent projects when one fails.
-  By default, your build script will C<die> after the first project that generates an error while building.
-  Change this behavior with C<DontStopForErrors()>.
-  Re-enable it with C<StopForErrors()>.
-
-=cut
-
-sub StopForErrors()
-	{
-		$stop_on_1st_error = 1;
-		
-			# Can't stop for errors unless we notice them.
-			# Can't notice them unless we are logging.
-			# If the user didn't explicitly request logging, log to a temporary file.
-
-		if ( ! $recent_errors_file )
-			{
-				OpenErrorLog("${TMPDIR}BuildResults");
-			}
-	}
-
-sub DontStopForErrors()
-	{
-		$stop_on_1st_error = 0;		
-	}
-
-sub log_message($)
-	{
-		if ( $logging )
-			{
-				my ($message) = @_;
-				print ERROR_LOG $message;
-			}
-	}
-
-sub log_message_with_time($)
-	{
-		if ( $logging )
-			{
-				my ($message) = @_;
-				my $time_stamp = localtime();
-				log_message("$message ($time_stamp)\n");
-			}
-	}
-
-sub log_recent_errors($)
-	{
-		my ($project_name) = @_;
-		my $found_errors = 0;
-	
-		if ( $logging )
-			{
-				open(RECENT_ERRORS, "<$recent_errors_file");
-
-				while( <RECENT_ERRORS> )
-					{
-						if ( /^Error/ || /^CouldnÕt find project file/ || /^Link Error/ )
-							{
-#								if (!$found_errors)
-#									print $_;
-								$found_errors = 1;
-							}
-						print ERROR_LOG $_;
-					}
-
-				close(RECENT_ERRORS);
-				unlink("$recent_errors_file");
-			}
-		
-		if ( $stop_on_1st_error && $found_errors )
-			{
-				print ERROR_LOG "### Build failed.\n";
-				die "### Errors encountered building \"$project_name\".\n";
-			}
-	}
-	
-sub DoBuildProject($$$)
-	{
-		my ($project_path, $target_name, $clean_build) = @_;
-		$project_path = full_path_to($project_path);
-
-#		$project_path =~ m/.+:(.+)/;
-#		my $project_name = $1;
-
-		log_message_with_time("### Building \"$project_path\"");
-
-			# Check that the given project exists
-		if (! -e $project_path)
-			{
-				print ERROR_LOG "### Build failed.\n";
-				die "### Can't find project file \"$project_path\".\n";
-			}
-		
-		print "Building \"$project_path\[$target_name\]\"\n";
-		
-		$had_errors = Moz::CodeWarriorLib::build_project(
-			$project_path, $target_name, $recent_errors_file, $clean_build
-		);
-		WaitNextEvent();
-
-#		$had_errors =
-#MacPerl::DoAppleScript(<<END_OF_APPLESCRIPT);
-#	tell (load script file "$CodeWarriorLib") to BuildProject("$project_path", "$project_name", "$target_name", "$recent_errors_file", $clean_build)
-#END_OF_APPLESCRIPT
-
-			# Append any errors to the globally accumulated log file
-#		if ( $had_errors ) # Removed this test, because we want warnings, too.  -- jrm
-			{
-				log_recent_errors($project_path);
-			}
-	}
-
-
-sub ImportXMLProject($$)
-{
-    my ($xml_path, $project_path) = @_;
-
-#    my ($codewarrior_ide_name) = Moz::CodeWarriorLib::getCodeWarriorIDEName();
-#    my $ascript = <<EOS;
-#      tell application "$codewarrior_ide_name"
-#        make new (project document) as ("$project_path") with data ("$xml_path")
-#      end tell
-#EOS
-#    print $ascript."\n";
-#    my($result) = MacPerl::DoAppleScript($ascript);
-#    unless ($result) { die "Error: ImportXMLProject AppleScript failed $^E $result\n";  }
-#    
-
-    my($import_error) = Moz::CodeWarriorLib::import_project($xml_path, $project_path);
-    if ($import_error ne "") {
-      die "Error: ImportXMLProject failed with error $import_error\n";
-    }
-}
-
-sub ExportProjectToXML($$)
-{
-    my ($project_path, $xml_path) = @_;
-
-    my (@suffix_list) = (".mcp");
-    my ($project_name, $project_dir, $suffix) = fileparse($project_path, @suffix_list);
-    if ($suffix eq "") { die "Project: $project_path doesn't look like a project file.\n"; }
-    
-    if (-e $xml_path) {
-        print "$xml_path exists - not exporting $project_path\n";
-    }
-    else {
-        print "Exporting $project_path to $xml_path\n";
-        my($export_error) = Moz::CodeWarriorLib::export_project($project_path, $xml_path);
-        if ($export_error ne "") {
-            die "Error: export_project failed with error '$export_error'\n";
-        }
-        
-        if (! -e $xml_path) {
-          die "Error: XML export to $xml_path failed\n";
-        }
-    }
-}
-
-
-=head2 Miscellaneous
-
-C<MakeAlias($old_file, $new_file)> functions like C<symlink()>, except with better argument defaulting and more explicit error messages.
-
-=cut
-
-sub MakeAlias($$)
-	{
-		my ($old_file, $new_file) = @_;
-
-			# if the directory to hold $new_file doesn't exist, create it
-		if ( ($new_file =~ m/(.+:)/) && !-d $1 )
-			{
-				mkpath($1);
-			}
-
-			# if a leaf name wasn't specified for $new_file, use the leaf from $old_file
-		if ( ($new_file =~ m/:$/) && ($old_file =~ m/.+:(.+)/) )
-			{
-				$new_file .= $1;
-			}
-
-		my $message = "Can't create a Finder alias (at \"$new_file\")\n for \"$old_file\"; because ";
-
-		die "Error: $message \"$old_file\" doesn't exist.\n" unless -e $old_file;
-		die "Error: $message I won't replace an existing (non-alias) file with an alias.\n" if ( -e $new_file && ! -l $new_file );
-
-			# now: $old_file exists; $new_file doesn't (or else, is an alias already)
-
-		if ( -l $new_file )
-			{
-					# ...then see if it already points to $old_file
-				my $current_target	= full_path_to(readlink($new_file));
-				my $new_target			= full_path_to($old_file);
-
-				return if ( $current_target eq $new_target );
-					# if the desired alias already exists and points to the right thing, then we're done
-				
-				unlink $new_file;
-			}
-		
-		symlink($old_file, $new_file) || die "Error: $message symlink returned an unexpected error.\n";
-	}
-	
-	
-=pod
-
-C<InstallFromManifest()>
-
-=cut
-
-sub InstallFromManifest($;$$)
-	{
-		my ($manifest_file, $dest_dir, $flat) = @_;
-		
-		$flat = 0 unless defined($flat); # if $flat, all rel. paths in MANIFEST get aliased to the root of $dest_dir
-
-		$dest_dir ||= ":";
-
-		$manifest_file =~ m/(.+):/;
-		my $source_dir =  $1;
-
-		chop($dest_dir) if $dest_dir =~ m/:$/;
-
-		#Mac::Events->import();
-		WaitNextEvent();
-		if ($flat)
-		{
-			print "Doing manifest on \"$manifest_file\" FLAT\n" unless $QUIET;
-		}
-		else
-		{
-			print "Doing manifest on \"$manifest_file\"\n" unless $QUIET;
-		}
-		
-		my $read = maniread(full_path_to($manifest_file));
-		foreach $file (keys %$read)
-			{
-				next unless $file;
-
-				$subdir = ":";
-				if (!$flat && ($file =~ /:.+:/ ))
-					{
-						$subdir = $&;
-					}
-
-				$file = ":$file" unless $file =~ m/^:/;
-				MakeAlias("$source_dir$file", "$dest_dir$subdir");
-			}
-	}
-
-
-=pod
-
-C<InstallResources()>
-
-=cut
-
-# parameters are path to MANIFEST file, destination dir, true (to make copies) or false (to make aliases)
-sub InstallResources($;$;$)
-	{
-		my ($manifest_file, $dest_dir, $copy_files) = @_;
-
-		$dest_dir ||= ":";
-		mkpath($dest_dir) if !-d $dest_dir;
-
-		$manifest_file =~ m/(.+):/;
-		my $source_dir =  $1;
-
-		chop($dest_dir) if $dest_dir =~ m/:$/;
-
-		WaitNextEvent();
-		print "Installing resources from \"$manifest_file\"\n" unless $QUIET;
-		
-		my $read = maniread(full_path_to($manifest_file));
-		foreach $file (keys %$read)
-			{
-				next unless $file;
-				
-				if ($copy_files)
-					{
-						copy("$source_dir:$file", "$dest_dir:$file");
-					}
-				else
-					{
-						MakeAlias("$source_dir:$file", "$dest_dir:$file");
-					}
-			}
-	}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// Delay
-#//--------------------------------------------------------------------------------------------------
-sub Delay($)		
-{
-  my ($delay_seconds) = @_;
-
-  $now = time;
-  
-  $exit_time = $now + $delay_seconds;
-
-  while ($exit_time > $now) {
-     $now = time;
-  }
-	
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// GetFileModDate
-#//--------------------------------------------------------------------------------------------------
-sub GetFileModDate($)
-{
-    my($filePath)=@_;
-    my($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
-        $atime,$mtime,$ctime,$blksize,$blocks) = stat($filePath);
-    return $mtime;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// LaunchCodeWarrior
-#//--------------------------------------------------------------------------------------------------
-sub LaunchCodeWarrior($)
-{
-  my($idepath_file) = @_;   # full path to IDE location file
-  my($cur_dir) = cwd();
-  
-  # this both launches and writes the IDE path file
-  Moz::CodeWarriorLib::activate($idepath_file);
-  
-  chdir($cur_dir);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// GetCodeWarriorRelativePath
-#//--------------------------------------------------------------------------------------------------
-sub GetCodeWarriorRelativePath($)
-{
-  my($rel_path) = @_;
-  return Moz::CodeWarriorLib::getCodeWarriorPath($rel_path);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// RedirectOutputToFile
-#//--------------------------------------------------------------------------------------------------
-sub RedirectOutputToFile($)
-{
-    my($log_file) = @_;
-    
-    # ensure that folders in the path exist
-    my($logdir) = "";
-    my($logfile) = $log_file;
-    
-    if ($log_file =~ /(.+?:)([^:]+)$/)       # ? for non-greedy match
-    {
-        $logdir = $1;
-        $logfile = $2;
-        
-        mkpath($logdir);
-    }
-
-    print "Output is now being redirected to the file '$log_file'\n";
-    
-    open(STDOUT, "> $log_file") || die "Can't redirect stdout";
-    open(STDERR, ">&STDOUT") || die "Can't dup stdout";
-    select(STDERR); $| = 1;     # make unbuffered
-    select(STDOUT); $| = 1;     # make unbuffered
-    
-    MacPerl::SetFileInfo("CWIE", "TEXT", $log_file);
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// ActivateApplication
-#//--------------------------------------------------------------------------------------------------
-
-sub ActivateApplication($)
-{
-	my ($appSignature) = @_;
-	my ($psi, $found);
-	my ($appPSN);
-	
-	$found = 0;
-		
-	foreach $psi (values(%Process))
-	{
-		if ($psi->processSignature() eq $appSignature)
-		{
-			$appPSN = $psi->processNumber();
-			$found = 1;
-            last;
-		}
-	}
-
-	if ($found == 0 || SameProcess($appPSN, GetFrontProcess()))
-	{
-		return;
-	}
-
-	SetFrontProcess($appPSN);
-
-	while (GetFrontProcess() != $appPSN)
-	{
-		WaitNextEvent();
-	}
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// IsProcessRunning
-#//--------------------------------------------------------------------------------------------------
-
-sub IsProcessRunning($)
-{
-    my($processName, $psn, $psi) = @_;
-    while ( ($psn, $psi) = each(%Process) ) {
-     if ($psi->processName eq $processName) { return 1; }
-    }
-    return 0;
-}
-
-
-1;
-
-=head1 AUTHORS
-
-Scott Collins <scc@netscape.com>, Simon Fraser <sfraser@netscape.com>, Chris Yeh <cyeh@netscape.com>
-
-=head1 SEE ALSO
-
-BuildMozillaDebug.pl (et al), BuildList.pm, CodeWarriorLib (an AppleScript library)
-
-=head1 COPYRIGHT
-
-The contents of this file are subject to the Netscape Public
-License Version 1.1 (the "License"); you may not use this file
-except in compliance with the License. You may obtain a copy of
-the License at http://www.mozilla.org/NPL/
-
-Software distributed under the License is distributed on an "AS
-IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-implied. See the License for the specific language governing
-rights and limitations under the License.
-
-The Original Code is Mozilla Communicator client code, released
-March 31, 1998.
-
-The Initial Developer of the Original Code is Netscape
-Communications Corporation. Portions created by Netscape are
-Copyright (C) 1998-1999 Netscape Communications Corporation. All
-Rights Reserved.
-
-Contributor(s): 
-
-=cut

mozilla/build/mac/build_scripts/Moz/Prefs.pm

@@ -1,272 +0,0 @@
-
-package Moz::Prefs;
-
-require 5.004;
-require Exporter;
-
-# Package that attempts to read a file from the Preferences folder,
-# and get build settings out of it
-
-use strict;
-
-use Exporter;
-use File::Path;
-
-use Mac::Files;
-
-use vars qw(@ISA @EXPORT);
-
-@ISA		  = qw(Exporter);
-@EXPORT 	= qw(ReadMozUserPrefs);
-
-
-#-------------------------------------------------------------------------------
-#
-# GetPrefsFolder
-#
-#-------------------------------------------------------------------------------
-
-sub GetPrefsFolder()
-{
-  my($prefs_folder) = FindFolder(kOnSystemDisk, kPreferencesFolderType, 1);
-  return $prefs_folder.":Mozilla build prefs";
-}
-
-
-#-------------------------------------------------------------------------------
-#
-# SetArrayValue
-#
-#-------------------------------------------------------------------------------
-sub SetArrayValue($$$)
-{
-  my($array_ref, $index1, $index2) = @_;
-
-  my($index);
-  foreach $index (@$array_ref)
-  {
-    if ($index->[0] eq $index1)
-    {
-      $index->[1] = $index2;
-      return 1;
-    }
-  }
-  
-  return 0;
-}
-
-
-#-------------------------------------------------------------------------------
-#
-# WriteDefaultPrefsFile
-#
-#-------------------------------------------------------------------------------
-
-sub WriteDefaultPrefsFile($)
-{
-  my($file_path) = @_;
-
-  my($file_contents);
-  $file_contents = <<'EOS';
-% You can use this file to customize the Mozilla build system.
-% The following kinds of lines are allowable:
-%   Comment lines, which start with a '%' in the first column
-%   Lines which modify the default build settings. For the list of flags,
-%   see MozBuildFlags.pm. Examples are:
-%
-%    build       pull            0                    % don't pull
-%    options     mng             1                    % turn mng on
-%   
-%   Line containing the special 'buildfrom' flag, which specifies
-%   where to start the build. Example:
-%   
-%    buildfrom   nglayout                % where to start the build
-%
-%   Lines which specify the location of the files used to store paths
-%   to the CodeWarrior IDE, and the MacCVS Pro session file. Note quoting
-%   of paths containing whitespace. Examples:
-%
-%    filepath   idepath         ::codewarrior.txt
-%    filepath   sessionpath     ":Some folder:MacCVS session path.txt"
-%
-%   Lines which modify the build settings like %main::DEBUG.
-%   Any lines which do not match either of the above are assumed
-%   to set variables on $main::. Examples:
-%   
-%    MOZILLA_OFFICIAL    1
-%
-EOS
-
-  $file_contents =~ s/%/#/g;
-   
-  local(*PREFS_FILE);
-
-  open(PREFS_FILE, "> $file_path") || die "Could not write default prefs file\n";
-  print PREFS_FILE ($file_contents);
-  close(PREFS_FILE);
-
-  MacPerl::SetFileInfo("McPL", "TEXT", $file_path);
-}
-
-
-#-------------------------------------------------------------------------------
-#
-# HandlePrefSet
-#
-#-------------------------------------------------------------------------------
-sub HandlePrefSet($$$$)
-{
-  my($flags, $name, $value, $desc) = @_;
-
-  if (SetArrayValue($flags, $name, $value)) {
-    print "Prefs set $desc flag '$name' to '$value'\n";
-  } else {
-    die "$desc setting '$name' is not a valid option\n";
-  }
-
-}
-
-
-#-------------------------------------------------------------------------------
-#
-# HandleBuildFromPref
-#
-#-------------------------------------------------------------------------------
-sub HandleBuildFromPref($$)
-{
-  my($build_array, $name) = @_;
-
-  my($setting) = 0;
-  my($index);
-  foreach $index (@$build_array)
-  {
-    if ($index->[0] eq $name) {
-      $setting = 1;
-    }
-    
-    $index->[1] = $setting;    
-  }
-
-  if ($setting == 1) {
-    print "Building from $name onwards, as specified by prefs\n";
-  } else {
-    printf "Failed to find buildfrom setting '$name'\n";
-  }
-}
-
-
-#-------------------------------------------------------------------------------
-#
-# ReadPrefsFile
-#
-#-------------------------------------------------------------------------------
-
-sub ReadPrefsFile($$$$$)
-{
-  my($file_path, $build_flags, $options_flags, $filepath_flags, $create_if_missing) = @_;
-  
-  local(*PREFS_FILE);
-  
-  if (open(PREFS_FILE, "< $file_path"))
-  {
-    print "Reading build prefs from '$file_path'\n";
-  
-    while (<PREFS_FILE>)
-    {
-      my($line) = $_;
-      chomp($line);
-      
-      if ($line =~ /^\#/ || $line =~ /^\s*$/) {    # ignore comments and empty lines
-        next;
-      }
-            
-      if (($line =~ /^\s*([^#\s]+)\s+([^#\s]+)\s+\"(.+)\"(\s+#.+)?/) ||
-          ($line =~ /^\s*([^#\s]+)\s+([^#\s]+)\s+\'(.+)\'(\s+#.+)?/) ||
-          ($line =~ /^\s*([^#\s]+)\s+([^#\s]+)\s+([^#\s]+)(\s+#.+)?/))
-      {
-        my($array_name) = $1;      
-        my($option_name) = $2;
-        my($option_value) = $3;      
-      
-        # print "Read '$array_name' '$option_name' '$option_value'\n";
-        
-        if ($array_name eq "build")
-        {
-          HandlePrefSet($build_flags, $option_name, $option_value, "Build");
-        }
-        elsif ($array_name eq "options")
-        {
-          HandlePrefSet($options_flags, $option_name, $option_value, "Options");
-        }
-        elsif ($array_name eq "filepath" && $option_name && $option_value)
-        {
-          HandlePrefSet($filepath_flags, $option_name, $option_value, "Filepath");
-        }
-        else
-        {
-          print "Unknown pref option at $line\n";
-        }
-      }
-      elsif ($line =~ /^\s*buildfrom\s+([^#\s]+)(\s+#.+)?/)
-      {
-        my($build_start) = $1;
-        HandleBuildFromPref($build_flags, $build_start);
-      }
-      elsif ($line =~ /^\s*([^#\s]+)\s+([^#\s]+)(\s+#.+)?/)
-      {
-        my($build_var) = $1;
-        my($var_setting) = $2;
-        
-        print "Setting \$main::$build_var to $var_setting\n";
-        eval "\$main::$build_var = \"$var_setting\"";
-      }
-      else
-      {
-        print "Unrecognized input line at $line\n";
-      }
-      
-    }
-    
-    close(PREFS_FILE);  
-  }
-  elsif ($create_if_missing)
-  {
-    print "No prefs file found at $file_path; using defaults\n";
-    
-    my($folder_path) = $file_path;
-    $folder_path =~ s/[^:]+$//;
-    mkpath($folder_path);
-    WriteDefaultPrefsFile($file_path);
-  }
-}
-
-
-#-------------------------------------------------------------------------------
-#
-# ReadMozUserPrefs
-#
-#-------------------------------------------------------------------------------
-
-sub ReadMozUserPrefs($$$$)
-{
-  my($prefs_file_name, $build_flags, $options_flags, $filepath_flags) = @_;
-  
-  if ($prefs_file_name eq "") { return; }
-  
-  # if local prefs exist, just use those. Othewise, look in the prefs folder
-  if (-e $prefs_file_name)
-  {
-    # read local prefs
-    ReadPrefsFile($prefs_file_name, $build_flags, $options_flags, $filepath_flags, 0);
-  }
-  else
-  {
-    # first read prefs folder prefs
-    my($prefs_path) = GetPrefsFolder();
-    $prefs_path .= ":$prefs_file_name";
-
-    ReadPrefsFile($prefs_path, $build_flags, $options_flags, $filepath_flags, 1);
-  }
-}
-
-1;

mozilla/build/mac/build_scripts/Moz/ProjectXML.pm

@@ -1,932 +0,0 @@
-#!/usr/bin/perl
-
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#   Simon Fraser <sfraser@netscape.com>
-#
-
-package Moz::ProjectXML;
-
-require 5.004;
-require Exporter;
-
-use strict;
-use Exporter;
-
-use Cwd;
-use XML::DOM;
-
-use vars qw(@ISA @EXPORT);
-
-@ISA      = qw(Exporter);
-@EXPORT   = qw(
-                ParseXMLDocument
-                DisposeXMLDocument
-                WriteXMLDocument
-                CleanupPro5XML
-                GetTargetsList
-                CloneTarget
-                SetAsSharedLibraryTarget
-                SetAsStaticLibraryTarget
-                AddTarget
-                RemoveTarget
-                GetTargetSetting
-                SetTargetSetting
-                getChildElementTextContents
-              );
-
-
-#--------------------------------------------------------------------------------------------------
-# A module for reading, manipulating, and writing XML-format CodeWarrior project files.
-# 
-# Sample usage:
-# 
-# use ProjectXML;
-# 
-# my $doc = ProjectXML::ParseXMLDocument("Test.mcp.xml");
-# ProjectXML::CloneTarget($doc, "Test.shlb", "Test.lib");
-# ProjectXML::SetAsStaticLibraryTarget($doc, "Test.lib", "TestOutput.lib");
-# ProjectXML::WriteXMLDocument($doc, "Test_out.xml");
-# ProjectXML::DisposeXMLDocument($doc);
-# 
-#--------------------------------------------------------------------------------------------------
-
-
-#//--------------------------------------------------------------------------------------------------
-#// ParseXMLDocument
-#// Note that the caller must call DisposeXMLDocument on the returned doc
-#//--------------------------------------------------------------------------------------------------
-sub ParseXMLDocument($)
-{
-  my($doc_path) = @_;
-
-  my $parser = new XML::DOM::Parser(ErrorContext => 2);
-  my $doc = $parser->parsefile($doc_path);
-
-  return $doc;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// DisposeXMLDocument
-#// Needed to avoid memory leaks - cleanup circular references for garbage collection
-#//--------------------------------------------------------------------------------------------------
-sub DisposeXMLDocument($)
-{
-  my($doc) = @_;
-  
-  $doc->dispose();
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// WriteXMLDocument
-#//--------------------------------------------------------------------------------------------------
-
-sub _pro5_tag_compression($$)
-{
-   return 1;    # Pro 5 is broken and can't import XML with <foo/> style tags
-}
-
-sub _pro6plus_tag_compression($$)
-{
-   return 0;    # Pro 6 can deal with empty XML tags like <foo/>
-}
-
-sub WriteXMLDocument($$$)
-{
-  my($doc, $file_path, $ide_version) = @_;
-
-  if ($ide_version eq "4.0")
-  {
-    XML::DOM::setTagCompression(\&_pro5_tag_compression);
-  }
-  else
-  {
-    XML::DOM::setTagCompression(\&_pro6plus_tag_compression);
-  }
-
-  $doc->printToFile($file_path);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// CleanupPro5XML
-#// XML Projects exported by Pro 5 contain garbage data under the MWMerge_MacOS_skipResources
-#// setting. This routine cleans this up, saving the result to a new file
-#//--------------------------------------------------------------------------------------------------
-sub CleanupPro5XML($$)
-{
-  my($xml_path, $out_path) = @_;
-  
-  local(*XML_FILE);
-  open(XML_FILE, "< $xml_path") || die "Error: failed to open file $xml_path\n";
-  
-  local(*CLEANED_FILE);
-  open(CLEANED_FILE, "> $out_path") || die "Error: failed to open file $out_path for writing\n";
-  
-  my $in_skip_resources_settings = 0;
-  
-  while(<XML_FILE>)
-  {
-      my($line) = $_;
-
-      if ($line =~ /^<\?codewarrior/)    # is processing inst line
-      {
-        my $test_line = $line;
-        chomp($test_line);
-  
-        my $out_line = $test_line;
-        if ($test_line =~ /^<\?codewarrior\s+exportversion=\"(.+)\"\s+ideversion=\"(.+)\"\s*\?>$/)
-        {
-          my $export_version = $1;
-          my $ide_version    = $2;
-
-          $ide_version = "4.0_mozilla";   # pseudo IDE version so we know we touched it
-          $out_line = "<?codewarrior exportversion=\"".$export_version."\" ideversion=\"".$ide_version."\"?>";
-        }
-
-        print CLEANED_FILE "$out_line\n";
-        next;
-      }
-      
-      if ($line =~ /MWMerge_MacOS_skipResources/)
-      {
-        $in_skip_resources_settings = 1;
-        print CLEANED_FILE "$line";
-      }
-      elsif($in_skip_resources_settings && $line =~ /<!-- Settings for/)
-      {
-        # leaving bad settings lines. Write closing tag
-        print CLEANED_FILE "                    <!-- Corrupted setting entries removed by script -->\n";
-        print CLEANED_FILE "                </SETTING>\n\n";
-        
-        print CLEANED_FILE "$line";
-
-        $in_skip_resources_settings = 0;
-      }
-      elsif (!$in_skip_resources_settings)
-      {      
-        print CLEANED_FILE "$line";
-      }
-  }
-  
-  close(XML_FILE);
-  close(CLEANED_FILE);
-
-}
-
-#--------------------------------------------------------------------------------------------------
-# SniffProjectXMLIDEVersion
-#
-#--------------------------------------------------------------------------------------------------
-sub SniffProjectXMLIDEVersion($)
-{
-  my($xml_path) = @_;
-  
-  my $found_version = "";
-  
-  local(*XML_FILE);
-  open(XML_FILE, "< $xml_path") || die "Error: failed to open file $xml_path\n";
-  
-  while(<XML_FILE>)
-  {
-      my($line) = $_;
-      chomp($line);
-      
-      if ($line =~ /^<\?codewarrior/)    # is processing inst line
-      {
-        unless ($line =~ /^<\?codewarrior\s+exportversion=\"(.+)\"\s+ideversion=\"(.+)\"\s*\?>$/)
-        {
-          die "Error: Failed to find ideversion in $xml_path in line $line\n";
-        }
-        
-        my $export_version = $1;
-        my $ide_version    = $2;
-
-        $found_version = $ide_version;         
-        last;
-      }
-  }
-  
-  close(XML_FILE);
-
-  return $found_version;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// GetTargetsList
-#// Returns an array of target names
-#//--------------------------------------------------------------------------------------------------
-sub GetTargetsList($)
-{
-  my($doc) = @_;
-
-  my $nodes = $doc->getElementsByTagName("TARGET");
-  my $n = $nodes->getLength;
-  
-  my @target_names;
-  
-  for (my $i = 0; $i < $n; $i++)
-  {
-    my ($node) = $nodes->item($i);   
-   
-    my($target_name) = getChildElementTextContents($node, "NAME");
-    push(@target_names, $target_name);
-  }
-
-  return @target_names;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// CloneTarget
-#// Clone the named target, renaming it to 'new_name'
-#//--------------------------------------------------------------------------------------------------
-sub CloneTarget($$$)
-{
-  my($doc, $target_name, $new_name) = @_;
-
-  my $target_node   = getTargetNode($doc, $target_name);
-
-  # clone here
-  my $target_clone  = $target_node->cloneNode(1);   # deep clone
-  
-  # -- munge target settings --
-
-  # set the target name field
-  setChildElementTextContents($doc, $target_clone, "NAME", $new_name);
-  
-  # set the targetname pref
-  setTargetNodeSetting($doc, $target_clone, "Targetname", $new_name);
-
-  # -- insert new target subtree --
-  
-  my $target_list   = $target_node->getParentNode();
-  $target_list->appendChild($target_clone);
-  
-  # -- now add to targetorder --
-  my (@target_order_nodes) = getChildOfDocument($doc, "TARGETORDER");
-  
-  my $target_order = @target_order_nodes[0];
-  
-  my $new_order     = $doc->createElement("ORDEREDTARGET");
-  my $order_name    = $doc->createElement("NAME");
-  
-  $new_order->appendChild($order_name);
-
-  setChildElementTextContents($doc, $new_order, "NAME", $new_name);
-  $target_order->appendChild($new_order);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// SetAsSharedLibraryTarget
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub SetAsSharedLibraryTarget($$$)
-{
-  my($doc, $target_name, $output_name) = @_;
-
-  my $target_node = getTargetNode($doc, $target_name);
-
-  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_type", "SharedLibrary");
-  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_filetype", "1936223330"); #'shlb'
-  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_outfile", $output_name);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// AddFileToTarget
-#// 
-#// Add a file to the specified target(s).
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub AddFileToTarget($$$)
-{
-  my($doc, $target_list, $file_name) = @_;
-
-  # the file must be added in 3 places:
-  # 1. in <TARGET><FILELIST><FILE> (with linkage flags if necessary)
-  # 2. in <TARGET><LINKORDER><FILEREF>
-  # 3. in <GROUPLIST><GROUP><FILEREF>
-  die "Write me\n";
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// RemoveFileFromTarget
-#// 
-#// Remove a file from the specified target, removing it from the entire project
-#// if no other targets reference it.
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub RemoveFileFromTarget($$$)
-{
-  my($doc, $target_node, $file_name) = @_;
-  
-  # the file must be removed in 3 places:
-  # 1. in <TARGET><FILELIST><FILE>
-  # 2. in <TARGET><LINKORDER><FILEREF>
-  # 3. in <GROUPLIST><GROUP><FILEREF>
-  
-  # first, remove from <FILELIST>
-  my $filelist_node = getFirstChildElement($target_node, "FILELIST");
-  unless ($filelist_node) { die "Error: failed to find FILELIST node\n"; }
-  
-  my $file_node = getChildNodeByGrandchildContents($doc, $filelist_node, "FILE", "PATH", $file_name);
-  unless ($file_node) { return; }
-
-  $filelist_node->removeChild($file_node);
-  
-  # next, remove from <LINKORDER>
-  my $linkorder_node = getFirstChildElement($target_node, "LINKORDER");
-  unless ($linkorder_node) { die "Error: failed to find LINKORDER node\n"; }
-  
-  my $fileref_node = getChildNodeByGrandchildContents($doc, $linkorder_node, "FILEREF", "PATH", $file_name);
-  unless ($fileref_node) { die "Error: link order node for file $file_name not found\n"; }
-
-  $linkorder_node->removeChild($fileref_node);
-  
-  # last, remove from <GROUPLIST>
-  # <GROUPLIST> is cross-target, so we have to be careful here.
-  my $grouplist_node = getChildOfDocument($doc, "GROUPLIST");
-  unless ($grouplist_node) { die "Error: failed to find GROUPLIST node\n"; }
-
-  # if the file isn't in any other targets, remove it from the groups
-  if (!GetFileInUse($doc, $file_name))
-  {
-    print "File $file_name is in no other targest. Removing from project\n";
-
-    my @group_nodes;
-    getChildElementsOfType($doc, $grouplist_node, "GROUP", \@group_nodes);
-    my $group_node;
-    foreach $group_node (@group_nodes)
-    {
-      my @fileref_nodes;
-      getChildElementsOfType($doc, $group_node, "FILEREF", \@fileref_nodes);
-  
-      my $fileref_node;
-      foreach $fileref_node (@fileref_nodes)
-      {
-        my $path_name = getChildElementTextContents($fileref_node, "PATH");
-        if ($path_name eq $file_name)
-        {
-          print "Removing $file_name from project group list\n";
-          $group_node->removeChild($fileref_node);
-          last;
-        }
-      }
-      
-      # can a file appear in more than one group?
-    }
-  }
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// SetAsStaticLibraryTarget
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub SetAsStaticLibraryTarget($$$)
-{
-  my($doc, $target_name, $output_name) = @_;
-
-  my $target_node = getTargetNode($doc, $target_name);
-
-  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_type", "Library");
-  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_filetype", "1061109567"); #'????'
-  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_outfile", $output_name);
-
-  # static targets don't need any library linkage, so we can remove linkage
-  # with all .shlb and .Lib files.
-  
-  my(@obsolete_files) = ("NSStdLibStubs", "InterfacesStubs", "InterfaceLib", "InternetConfigLib");
-
-  print " Removing libraries etc. from target\n";
-
-  # get all files in target
-  my @target_files = GetTargetFilesList($doc, $target_name);
-  my $target_file;
-  foreach $target_file (@target_files)
-  {
-    if ($target_file =~ /(\.shlb|\.lib|\.Lib|\.o|\.exp)$/)
-    {
-      RemoveFileFromTarget($doc, $target_node, $target_file);
-    }
-  }
-  
-  print " Removing stub libraries from target\n";
-  
-  # then remove files with known names
-  my $obs_file;
-  foreach $obs_file (@obsolete_files)
-  {
-    RemoveFileFromTarget($doc, $target_node, $obs_file);
-  }
-
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// AddTarget
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub AddTarget($$)
-{
-  my($doc, $target_name) = @_;
-
-  die "Write me\n";
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// RemoveTarget
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub RemoveTarget($$)
-{
-  my($doc, $target_name) = @_;
-
-  die "Write me\n";
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// GetTargetSetting
-#// Get the value for the specified setting in the specified target
-#//--------------------------------------------------------------------------------------------------
-sub GetTargetSetting($$$)
-{
-  my($doc, $target_name, $setting_name) = @_;
-
-  my $target_node   = getTargetNode($doc, $target_name);
-  return getTargetNodeSetting($target_node, "VALUE");
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// SetTargetSetting
-#// Set the value for the specified setting in the specified target
-#//--------------------------------------------------------------------------------------------------
-sub SetTargetSetting($$$$)
-{
-  my($doc, $target_name, $setting_name, $new_value) = @_;
-
-  my $target_node   = getTargetNode($doc, $target_name);
-  setTargetNodeSetting($doc, $target_node, "VALUE", $new_value);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// GetTargetFilesList
-#// Return an array of the files in the target (in filelist order)
-#//--------------------------------------------------------------------------------------------------
-sub GetTargetFilesList($$)
-{
-  my($doc, $target_name) = @_;
-
-  my $target_node = getTargetNode($doc, $target_name);
-
-  my @files_list;
-    
-  my $filelist_node = getFirstChildElement($target_node, "FILELIST");
-  unless ($filelist_node) { die "Error: failed to find FILELIST node\n"; }
-
-  my @file_nodes;
-  getChildElementsOfType($doc, $filelist_node, "FILE", \@file_nodes);
-  
-  my $node;
-  foreach $node (@file_nodes)
-  {
-    my $file_name = getChildElementTextContents($node, "PATH");
-    push(@files_list, $file_name);
-  }
-  
-  return @files_list;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// FileIsInTarget
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub FileIsInTarget($$$)
-{
-  my($doc, $file_name, $target_name) = @_;
-
-  my $target_node = getTargetNode($doc, $target_name);
-  unless ($target_node) { die "Error: no target found called $target_name\n"; }
-
-  my $file_node = GetTargetFileNode($doc, $target_node, $file_name);
-  if ($file_node) {
-    return 1;
-  }
-  
-  return 0;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// GetFileTargetsList
-#// Return an array of the targets that a file is in (expensive)
-#//--------------------------------------------------------------------------------------------------
-sub GetFileTargetsList($$)
-{
-  my ($doc, $file_name) = @_;
-
-  my @target_list;
-
-  my @targets = GetTargetsList($doc);
-  my $target;
-  
-  foreach $target (@targets)
-  {
-    if (FileIsInTarget($doc, $file_name, $target))
-    {
-      push(@target_list, $target);
-    }
-  }
-  
-  return @target_list;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// GetTargetFileNode
-#// 
-#//--------------------------------------------------------------------------------------------------
-sub GetTargetFileNode($$$)
-{
-  my($doc, $target_node, $file_name) = @_;
-
-  my $filelist_node = getFirstChildElement($target_node, "FILELIST");
-  unless ($filelist_node) { die "Error: failed to find FILELIST node\n"; }
-  
-  my $file_node = getChildNodeByGrandchildContents($doc, $filelist_node, "FILE", "PATH", $file_name);
-
-  return $file_node;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// GetFileInUse
-#// Return true if the file is used by any target
-#//--------------------------------------------------------------------------------------------------
-sub GetFileInUse($$)
-{
-  my($doc, $file_name) = @_;
-
-  my $targetlist_node = getChildOfDocument($doc, "TARGETLIST");
-
-  my $target_node = $targetlist_node->getFirstChild();
- 
-  while ($target_node)
-  {
-    if ($target_node->getNodeTypeName eq "ELEMENT_NODE" &&
-        $target_node->getTagName() eq "TARGET")
-    {
-      # if this is a target node
-      my $file_node = GetTargetFileNode($doc, $target_node, $file_name);
-      if ($file_node) {
-        return 1;   # found it
-      }      
-    }
-
-    $target_node = $target_node->getNextSibling();
-  }
-  
-  # not found
-  return 0;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// getChildOfDocument
-#//--------------------------------------------------------------------------------------------------
-sub getChildOfDocument($$)
-{
-  my($doc, $child_type) = @_;
-
-  return getFirstChildElement($doc->getDocumentElement(), $child_type);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getFirstChildElement
-#//--------------------------------------------------------------------------------------------------
-sub getFirstChildElement($$)
-{
-  my($node, $element_name) = @_;
-
-  my $found_node;
-  
-  unless ($node) { die "getFirstChildElement called with empty node\n"; }
-  
-  #look for the first "element_name" child
-
-  my $child_node = $node->getFirstChild();
- 
-  while ($child_node)
-  {
-    if ($child_node->getNodeTypeName eq "ELEMENT_NODE" &&
-        $child_node->getTagName() eq $element_name)
-    {
-      $found_node = $child_node;
-      last;
-    }
-
-    $child_node = $child_node->getNextSibling();
-  }
-   
-  return $found_node;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getChildElementsOfType
-#// 
-#// Return an array of refs to child nodes of the given type
-#//--------------------------------------------------------------------------------------------------
-sub getChildElementsOfType($$$$)
-{
-  my($doc, $node, $child_type, $array_ref) = @_;
-
-  my $child_node = $node->getFirstChild();
- 
-  while ($child_node)
-  {
-    if ($child_node->getNodeTypeName eq "ELEMENT_NODE" &&
-        $child_node->getTagName() eq $child_type)
-    {
-      push(@$array_ref, $child_node);
-    }
-
-    $child_node = $child_node->getNextSibling();
-  }
-
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// getChildElementTextContents
-#//--------------------------------------------------------------------------------------------------
-#
-# Given <FOOPY><NERD>Hi!</NERD></FOOPY>, where $node is <FOOPY>,
-# returns "Hi!". If > 1 <NERD> node, returns the contents of the first.
-#
-sub getChildElementTextContents($$)
-{
-  my($node, $tag_name) = @_;
-
-  my $first_element = getFirstChildElement($node, $tag_name);  
-  my $text_node     = $first_element->getFirstChild();
-  
-  my $text_contents = "";
-  
-  # concat adjacent text nodes
-  while ($text_node)
-  {
-    if ($text_node->getNodeTypeName() ne "TEXT_NODE")
-    {
-      last;
-    }
-
-    $text_contents = $text_contents.$text_node->getData();
-    $text_node = $text_node->getNextSibling();
-  }
-
-  return $text_contents;
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// setChildElementTextContents
-#//--------------------------------------------------------------------------------------------------
-sub setChildElementTextContents($$$$)
-{
-  my($doc, $node, $tag_name, $contents_text) = @_;
-  
-  my $first_element = getFirstChildElement($node, $tag_name);  
-  my $new_text_node = $doc->createTextNode($contents_text);
-  
-  # replace all child elements with a text element
-  removeAllChildren($first_element);
-  
-  $first_element->appendChild($new_text_node);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getChildNodeByContents
-#// 
-#// Consider <foo><bar><baz>Foopy</baz></bar><bar><baz>Loopy</baz></bar></foo>
-#// This function, when called with getChildNodeByContents($foonode, "bar", "baz", "Loopy")
-#// returns the second <bar> node.
-#//--------------------------------------------------------------------------------------------------
-sub getChildNodeByGrandchildContents($$$$$)
-{
-  my($doc, $node, $child_type, $gc_type, $gc_contents) = @_;    # gc = grandchild
-
-  my $found_node;
-  my $child_node = $node->getFirstChild();
-  while ($child_node)
-  {
-    if ($child_node->getNodeTypeName eq "ELEMENT_NODE" &&
-        $child_node->getTagName() eq $child_type)
-    {
-      # check for a child of this node of type 
-      my $child_contents = getChildElementTextContents($child_node, $gc_type);
-
-      if ($child_contents eq $gc_contents)
-      {
-        $found_node = $child_node;
-        last;
-      }
-    }
-
-    $child_node = $child_node->getNextSibling();
-  }
-
-  return $found_node;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getTargetNode
-#//--------------------------------------------------------------------------------------------------
-sub getTargetNode($$)
-{
-  my($doc, $target_name) = @_;
-
-  my $targetlist_node = getChildOfDocument($doc, "TARGETLIST");
-  return getChildNodeByGrandchildContents($doc, $targetlist_node, "TARGET", "NAME", $target_name);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getTargetNamedSettingNode
-#//--------------------------------------------------------------------------------------------------
-sub getTargetNamedSettingNode($$)
-{
-  my($target_node, $setting_name) = @_;
-
-  my $setting_node;
-
-  my $settinglist_node = getFirstChildElement($target_node, "SETTINGLIST");
-  my $child_node = $settinglist_node->getFirstChild();
- 
-  while ($child_node)
-  {
-    if ($child_node->getNodeTypeName ne "ELEMENT_NODE")
-    {
-      $child_node = $child_node->getNextSibling();
-      next;
-    }
-    
-    if ($child_node->getTagName() eq "SETTING")
-    {
-      my $set_name = getChildElementTextContents($child_node, "NAME");
-
-      if ($set_name eq $setting_name)
-      {
-        $setting_node = $child_node;
-        last;
-      }
-    }
-
-    $child_node = $child_node->getNextSibling();
-  }
-
-  return $setting_node;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// getTargetNodeSetting
-#//--------------------------------------------------------------------------------------------------
-sub getTargetNodeSetting($$)
-{
-  my($target_node, $setting_name) = @_;
-  
-  my $setting_node  = getTargetNamedSettingNode($target_node, $setting_name);
-  return getChildElementTextContents($setting_node, "VALUE");
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// setTargetNodeSetting
-#//--------------------------------------------------------------------------------------------------
-sub setTargetNodeSetting($$$$)
-{
-  my($doc, $target_node, $setting_name, $new_value) = @_;
-
-  my $setting_node  = getTargetNamedSettingNode($target_node, $setting_name);
-
-  setChildElementTextContents($doc, $setting_node, "VALUE", $new_value);
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// elementInArray
-#//--------------------------------------------------------------------------------------------------
-sub elementInArray($$)
-{
-  my($element, $array) = @_;
-  my $test;
-  foreach $test (@$array)
-  {
-    if ($test eq $element) {
-      return 1;
-    }
-  }
-  return 0;
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// removeAllChildren
-#//--------------------------------------------------------------------------------------------------
-sub removeAllChildren($)
-{
-  my($node) = @_;
-  
-  my $child_node = $node->getFirstChild();
-  
-  while ($child_node)
-  {
-    $node->removeChild($child_node);
-    $child_node = $node->getFirstChild();
-  }
-}
-
-
-#//--------------------------------------------------------------------------------------------------
-#// dumpNodeData
-#//--------------------------------------------------------------------------------------------------
-sub dumpNodeData($)
-{
-  my($node) = @_;
-  
-  unless ($node) { die "Null node passed to dumpNodeData\n"; }
-  
-  print "Dumping node $node\n";
-  
-  my($node_type) = $node->getNodeTypeName();
-  
-  if ($node_type eq "ELEMENT_NODE")
-  {
-    my($node_name) = $node->getTagName();
-    print "Element $node_name\n";
-  }
-  elsif ($node_type eq "TEXT_NODE")
-  {
-    my($node_data) = $node->getData;
-    # my(@node_vals) = unpack("C*", $node_data);
-    print "Text '$node_data'\n";    # may contain LF chars
-  }
-  else
-  {
-    print "Node $node_type\n";
-  }
-
-}
-
-#//--------------------------------------------------------------------------------------------------
-#// dumpNodeTree
-#//--------------------------------------------------------------------------------------------------
-sub dumpNodeTree($)
-{
-  my($node) = @_;
-  
-  my($child_node) = $node->getFirstChild();
-  
-  unless ($child_node) { return; }
-
-  # recurse
-  dumpNodeData($child_node);
-  
-  # then go through child nodes
-  while ($child_node)
-  {
-    dumpNodeTree($child_node);
-  
-    $child_node = $child_node->getNextSibling();
-  }
-}
-
-
-
-
-1;
-

mozilla/build/mac/build_scripts/MozillaBuildFlags.txt

@@ -1,90 +0,0 @@
-#-------------------------------------------------------------------------------
-# These 3 lists are the 'master lists' to control what gets built.
-# 
-# Ordering in these arrays is important; it has to reflect the order in
-# which the build occurs.
-#
-# Setting containing spaces must be quoted with double quotes.
-#-------------------------------------------------------------------------------
-
-build_flags
-all             1
-pull            0
-dist            0
-config          0
-xpidl           0
-idl             0
-stubs           0
-runtime         0
-common          0
-imglib          0
-libimg2         0
-necko           0
-security        0
-browserutils    0
-intl            0
-nglayout        0
-accessiblity    0
-editor          0
-embedding       0
-viewer          0
-xpapp           0
-extensions      0
-plugins         0
-mailnews        0
-apprunner       0
-resources       0
-
-options_flags
-pull_by_date    0
-chrome_jars     1
-chrome_files    0
-use_jars        1
-transformiix    1
-mathml          0      MOZ_MATHML
-svg             0      MOZ_SVG
-# svg requires libart, which is an lgpl library. You need to pull it 
-# explicitly.
-libart_lgpl     0
-mng             1
-ldap            1      MOZ_LDAP_XPCOM
-ldap_experimental 0    MOZ_LDAP_XPCOM_EXPERIMENTAL
-xmlextras       1
-wsp             0      MOZ_WSP
-inspector       1
-mailextras      1
-xptlink         0
-psm             0      MOZ_PSM
-embedding_test  1
-embedding_chrome 0
-embedding_xulprefs 0
-embedding_xulsecurity 0
-carbon          0      TARGET_CARBON
-useimg2         1      USE_IMG2
-lowmem          0      MOZ_MAC_LOWMEM
-accessible      1      ACCESSIBILITY
-bidi            1      IBMBIDI
-p3p             0
-jsd             1
-venkman         1
-moz_logging     1      MOZ_LOGGING
-chatzilla       1
-content_packs   1
-xml_rpc         1
-cview           1
-help            1
-timeline        0      MOZ_TIMELINE
-static_build    0      MOZ_STATIC_COMPONENT_LIBS
-string_debug    0      DEBUG_STRING
-string_stats    0      DEBUG_STRING_STATS
-xpctools        0      XPC_TOOLS_SUPPORT
-smime           1
-mdn             1
-print_preview   1      NS_PRINT_PREVIEW
-moz_xul         1      MOZ_XUL
-
-filepath_flags
-idepath             ":CodeWarrior IDE Path.txt"
-sessionpath         ":Mozilla session path.txt"
-buildlogfilepath    ":Build Logs:Mozilla build log.txt"   # this is a path
-scriptlogfilepath   ":Build Logs:Mozilla script log.txt"

mozilla/build/mac/build_scripts/MozillaCheckoutList.txt

@@ -1,22 +0,0 @@
-# List of modules to check out. Format is
-#   module, (tag), (date)
-# where tag and date are optional (non-trailing commas are required)
-#
-# Examples:
-#   mozilla/nsprpub, NSPRPUB_CLIENT_TAG
-#   mozilla/gc, , 10/25/2000 12:00:00
-#
-
-mozilla/nsprpub,        	NETSCAPE_7_02_RELEASE
-mozilla/security/nss,   	NETSCAPE_7_02_RELEASE
-mozilla/security/manager,	NETSCAPE_7_02_RELEASE
-mozilla/accessible,			NETSCAPE_7_02_RELEASE
-mozilla/directory/c-sdk,	NETSCAPE_7_02_RELEASE
-mozilla/lib/mac/Instrumentation, 	NETSCAPE_7_02_RELEASE
-mozilla/gfx2, 				NETSCAPE_7_02_RELEASE
-mozilla/modules/libpr0n,	NETSCAPE_7_02_RELEASE
-SeaMonkeyAll, 				NETSCAPE_7_02_RELEASE
-
-## You need this if you want to be able to use SVG
-## Note that this library is under the LGPL, not the MPL
-#mozilla/other-licenses/libart_lgpl

mozilla/build/mac/build_scripts/PullMozilla.pl

@@ -1,79 +0,0 @@
-#!perl
-
-#
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): 
-#   Simon Fraser <sfraser@netscape.com>
-#
-
-require 5.004;
-
-use strict;
-
-use Cwd;
-use Moz::BuildUtils;
-use Moz::BuildCore;
-
-#-------------------------------------------------------------
-# Where have the build options gone?
-# 
-# The various build flags have been centralized into one place. 
-# The master list of options is in MozBuildFlags.txt. However, 
-# you should never need to edit that file, or this one.
-# 
-# To customize what gets built, or where to start the build, 
-# edit the $prefs_file_name file in
-# System Folder:Preferences:Mozilla build prefs:
-# Documentation is provided in that file.
-#-------------------------------------------------------------
-
-my($prefs_file_name) = "Mozilla pull prefs";
-
-#-------------------------------------------------------------
-# hashes to hold build options
-#-------------------------------------------------------------
-my(%build);
-my(%options);
-my(%filepaths);
-my(%optiondefines);
-
-# Hash of input files for this build. Eventually, there will be
-# input files for manifests, and projects too.
-my(%inputfiles) = (
-  "buildflags",     "MozillaBuildFlags.txt",
-  "checkoutdata",   "MozillaCheckoutList.txt",
-  "buildprogress",  "",
-  "buildmodule",    "MozillaBuildList.pm",
-  "checkouttime",   "Mozilla last checkout"
-);
-#-------------------------------------------------------------
-# end build hashes
-#-------------------------------------------------------------
-
-# set the build root directory, which is the the dir above mozilla
-SetupBuildRootDir(":mozilla:build:mac:build_scripts");
-
-# Set up all the flags on $main::, like DEBUG, CARBON etc.
-# Override the defaults using the preferences files.
-SetupDefaultBuildOptions(0, ":mozilla:dist:viewer:", "");
-
-my($do_checkout)    = 1;
-my($do_build)       = 0;
-
-RunBuild($do_checkout, $do_build, \%inputfiles, $prefs_file_name);

mozilla/build/mac/test/README

@@ -1,4 +0,0 @@
-This directory is merely here to test the project editor server. It will go away after
-it is validated. For more information, see http://camelot.
-
-Testing watchers.

mozilla/build/mac/test/test1.cpp

@@ -1 +0,0 @@
-// test1.cpp

mozilla/build/mac/test/test2.cpp

@@ -1 +0,0 @@
-// test2.cpp

mozilla/build/mac/test/test3.cpp

@@ -1 +0,0 @@
-// test2.cpp

mozilla/build/mac/test/test5.cpp

@@ -1,4 +0,0 @@
-// test2.cpp
-
-as
-dfasdf

mozilla/build/mac/tools/BuildSystemInfo/BuildSystemInfo.cpp

@@ -1,12 +0,0 @@
-#include <stdio.h>
-
-#include <ConditionalMacros.h>
-
-int main(int argc, char* argv[])
-{
-    FILE* file = fopen("BuildSystemInfo.pm", "w");
-    if (file != NULL) {
-        fprintf(file, "$UNIVERSAL_INTERFACES_VERSION=0x%04X;\n", UNIVERSAL_INTERFACES_VERSION);
-        fclose(file);
-    }
-}

mozilla/client.mk

@@ -1,650 +0,0 @@
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-#
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-#
-# The Original Code is mozilla.org code.
-#
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation.  Portions created by Netscape are
-# Copyright (C) 1998 Netscape Communications Corporation. All
-# Rights Reserved.
-#
-# Contributor(s): Stephen Lamm
-
-# Build the Mozilla client.
-#
-# This needs CVSROOT set to work, e.g.,
-#   setenv CVSROOT :pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
-# or
-#   setenv CVSROOT :pserver:username%somedomain.org@cvs.mozilla.org:/cvsroot
-# 
-# To checkout and build a tree,
-#    1. cvs co mozilla/client.mk
-#    2. cd mozilla
-#    3. gmake -f client.mk
-#
-# Other targets (gmake -f client.mk [targets...]),
-#    checkout
-#    build
-#    clean (realclean is now the same as clean)
-#    distclean
-#
-# See http://www.mozilla.org/build/unix.html for more information.
-#
-# Options:
-#   MOZ_OBJDIR           - Destination object directory
-#   MOZ_CO_DATE          - Date tag to use for checkout (default: none)
-#   MOZ_CO_MODULE        - Module to checkout (default: SeaMonkeyAll)
-#   MOZ_CVS_FLAGS        - Flags to pass cvs (default: -q -z3)
-#   MOZ_CO_FLAGS         - Flags to pass after 'cvs co' (default: -P)
-#   MOZ_MAKE_FLAGS       - Flags to pass to $(MAKE)
-#   MOZ_CO_BRANCH        - Branch tag (Deprecated. Use MOZ_CO_TAG below.)
-#
-
-#######################################################################
-# Checkout Tags
-#
-# For branches, uncomment the MOZ_CO_TAG line with the proper tag,
-# and commit this file on that tag.
-MOZ_CO_TAG = NETSCAPE_7_02_RELEASE
-NSPR_CO_TAG = NETSCAPE_7_02_RELEASE
-PSM_CO_TAG = NETSCAPE_7_02_RELEASE
-NSS_CO_TAG = NETSCAPE_7_02_RELEASE
-LDAPCSDK_CO_TAG = NETSCAPE_7_02_RELEASE
-ACCESSIBLE_CO_TAG = NETSCAPE_7_02_RELEASE
-GFX2_CO_TAG = NETSCAPE_7_02_RELEASE
-IMGLIB2_CO_TAG = NETSCAPE_7_02_RELEASE
-BUILD_MODULES = all
-
-#######################################################################
-# Defines
-#
-CVS = cvs
-
-CWD := $(shell pwd)
-
-ifeq "$(CWD)" "/"
-CWD   := /.
-endif
-
-ifneq (, $(wildcard client.mk))
-# Ran from mozilla directory
-ROOTDIR   := $(shell dirname $(CWD))
-TOPSRCDIR := $(CWD)
-else
-# Ran from mozilla/.. directory (?)
-ROOTDIR   := $(CWD)
-TOPSRCDIR := $(CWD)/mozilla
-endif
-
-# on os2, TOPSRCDIR may have two forward slashes in a row, which doesn't
-#  work;  replace first instance with one forward slash
-TOPSRCDIR := $(shell echo "$(TOPSRCDIR)" | sed -e 's%//%/%')
-
-ifndef TOPSRCDIR_MOZ
-TOPSRCDIR_MOZ=$(TOPSRCDIR)
-endif
-
-# if ROOTDIR equals only drive letter (i.e. "C:"), set to "/"
-DIRNAME := $(shell echo "$(ROOTDIR)" | sed -e 's/^.://')
-ifeq ($(DIRNAME),)
-ROOTDIR := /.
-endif
-
-AUTOCONF := autoconf
-MKDIR := mkdir
-SH := /bin/sh
-ifndef MAKE
-MAKE := gmake
-endif
-
-CONFIG_GUESS_SCRIPT := $(wildcard $(TOPSRCDIR)/build/autoconf/config.guess)
-ifdef CONFIG_GUESS_SCRIPT
-  CONFIG_GUESS = $(shell $(CONFIG_GUESS_SCRIPT))
-else
-  _IS_FIRST_CHECKOUT := 1
-endif
-
-####################################
-# CVS
-
-# Add the CVS root to CVS_FLAGS if needed
-CVS_ROOT_IN_TREE := $(shell cat $(TOPSRCDIR)/CVS/Root 2>/dev/null)
-ifneq ($(CVS_ROOT_IN_TREE),)
-ifneq ($(CVS_ROOT_IN_TREE),$(CVSROOT))
-  CVS_FLAGS := -d $(CVS_ROOT_IN_TREE)
-endif
-endif
-
-CVSCO = $(strip $(CVS) $(CVS_FLAGS) co $(CVS_CO_FLAGS))
-CVSCO_LOGFILE := $(ROOTDIR)/cvsco.log
-CVSCO_LOGFILE := $(shell echo $(CVSCO_LOGFILE) | sed s%//%/%)
-
-ifdef MOZ_CO_TAG
-  CVS_CO_FLAGS := -r $(MOZ_CO_TAG)
-endif
-
-####################################
-# Load mozconfig Options
-
-# See build pages, http://www.mozilla.org/build/unix.html, 
-# for how to set up mozconfig.
-MOZCONFIG_LOADER := mozilla/build/autoconf/mozconfig2client-mk
-MOZCONFIG_FINDER := mozilla/build/autoconf/mozconfig-find 
-MOZCONFIG_MODULES := mozilla/build/unix/modules.mk
-run_for_side_effects := \
-  $(shell cd $(ROOTDIR); \
-     if test "$(_IS_FIRST_CHECKOUT)"; then \
-        $(CVSCO) $(MOZCONFIG_FINDER) $(MOZCONFIG_LOADER) $(MOZCONFIG_MODULES); \
-     else true; \
-     fi; \
-     $(MOZCONFIG_LOADER) $(TOPSRCDIR) mozilla/.mozconfig.mk > mozilla/.mozconfig.out)
-include $(TOPSRCDIR)/.mozconfig.mk
-include $(TOPSRCDIR)/build/unix/modules.mk
-
-####################################
-# Options that may come from mozconfig
-
-# Change CVS flags if anonymous root is requested
-ifdef MOZ_CO_USE_MIRROR
-  CVS_FLAGS := -d :pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
-endif
-
-# MOZ_CVS_FLAGS - Basic CVS flags
-ifeq "$(origin MOZ_CVS_FLAGS)" "undefined"
-  CVS_FLAGS := $(CVS_FLAGS) -q -z 3 
-else
-  CVS_FLAGS := $(MOZ_CVS_FLAGS)
-endif
-
-# This option is deprecated. The best way to have client.mk pull a tag
-# is to set MOZ_CO_TAG (see above) and commit that change on the tag.
-ifdef MOZ_CO_BRANCH
-  $(warning Use MOZ_CO_TAG instead of MOZ_CO_BRANCH)
-  CVS_CO_FLAGS := -r $(MOZ_CO_BRANCH)
-endif
-
-# MOZ_CO_FLAGS - Anything that we should use on all checkouts
-ifeq "$(origin MOZ_CO_FLAGS)" "undefined"
-  CVS_CO_FLAGS := $(CVS_CO_FLAGS) -P
-else
-  CVS_CO_FLAGS := $(CVS_CO_FLAGS) $(MOZ_CO_FLAGS)
-endif
-
-ifdef MOZ_CO_DATE
-  CVS_CO_DATE_FLAGS := -D "$(MOZ_CO_DATE)"
-endif
-
-ifdef MOZ_OBJDIR
-  OBJDIR := $(MOZ_OBJDIR)
-  MOZ_MAKE := $(MAKE) $(MOZ_MAKE_FLAGS) -C $(OBJDIR)
-else
-  OBJDIR := $(TOPSRCDIR)
-  MOZ_MAKE := $(MAKE) $(MOZ_MAKE_FLAGS)
-endif
-
-####################################
-# CVS defines for PSM
-#
-PSM_CO_MODULE= mozilla/security/manager
-PSM_CO_FLAGS := -P -A
-ifdef MOZ_CO_FLAGS
-  PSM_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef PSM_CO_TAG
-  PSM_CO_FLAGS := $(PSM_CO_FLAGS) -r $(PSM_CO_TAG)
-endif
-CVSCO_PSM = $(CVS) $(CVS_FLAGS) co $(PSM_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(PSM_CO_MODULE)
-
-####################################
-# CVS defines for NSS
-#
-NSS_CO_MODULE = mozilla/security/nss \
-		mozilla/security/coreconf \
-		$(NULL)
-
-NSS_CO_FLAGS := -P
-ifdef MOZ_CO_FLAGS
-  NSS_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef NSS_CO_TAG
-   NSS_CO_FLAGS := $(NSS_CO_FLAGS) -r $(NSS_CO_TAG)
-endif
-# Cannot pull static tags by date
-ifeq ($(NSS_CO_TAG),NSS_CLIENT_TAG)
-CVSCO_NSS = $(CVS) $(CVS_FLAGS) co $(NSS_CO_FLAGS) $(NSS_CO_MODULE)
-else
-CVSCO_NSS = $(CVS) $(CVS_FLAGS) co $(NSS_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(NSS_CO_MODULE)
-endif
-
-####################################
-# CVS defines for NSPR
-#
-NSPR_CO_MODULE = mozilla/nsprpub
-NSPR_CO_FLAGS := -P
-ifdef MOZ_CO_FLAGS
-  NSPR_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef NSPR_CO_TAG
-  NSPR_CO_FLAGS := $(NSPR_CO_FLAGS) -r $(NSPR_CO_TAG)
-endif
-# Cannot pull static tags by date
-ifeq ($(NSPR_CO_TAG),NSPRPUB_CLIENT_TAG)
-CVSCO_NSPR = $(CVS) $(CVS_FLAGS) co $(NSPR_CO_FLAGS) $(NSPR_CO_MODULE)
-else
-CVSCO_NSPR = $(CVS) $(CVS_FLAGS) co $(NSPR_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(NSPR_CO_MODULE)
-endif
-
-####################################
-# CVS defines for the C LDAP SDK
-#
-LDAPCSDK_CO_MODULE = mozilla/directory/c-sdk
-LDAPCSDK_CO_FLAGS := -P
-ifdef MOZ_CO_FLAGS
-  LDAPCSDK_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef LDAPCSDK_CO_TAG
-  LDAPCSDK_CO_FLAGS := $(LDAPCSDK_CO_FLAGS) -r $(LDAPCSDK_CO_TAG)
-endif
-CVSCO_LDAPCSDK = $(CVS) $(CVS_FLAGS) co $(LDAPCSDK_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(LDAPCSDK_CO_MODULE)
-
-####################################
-# CVS defines for the C LDAP SDK
-#
-ACCESSIBLE_CO_MODULE = mozilla/accessible
-ACCESSIBLE_CO_FLAGS := -P
-ifdef MOZ_CO_FLAGS
-  ACCESSIBLE_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef ACCESSIBLE_CO_TAG
-  ACCESSIBLE_CO_FLAGS := $(ACCESSIBLE_CO_FLAGS) -r $(ACCESSIBLE_CO_TAG)
-endif
-CVSCO_ACCESSIBLE = $(CVS) $(CVS_FLAGS) co $(ACCESSIBLE_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(ACCESSIBLE_CO_MODULE)
-
-####################################
-# CVS defines for gfx2
-#
-GFX2_CO_MODULE = mozilla/gfx2
-GFX2_CO_FLAGS := -P
-ifdef MOZ_CO_FLAGS
-  GFX2_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef GFX2_CO_TAG
-  GFX2_CO_FLAGS := $(GFX2_CO_FLAGS) -r $(GFX2_CO_TAG)
-endif
-CVSCO_GFX2 = $(CVS) $(CVS_FLAGS) co $(GFX2_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(GFX2_CO_MODULE)
-
-####################################
-# CVS defines for new image library
-#
-IMGLIB2_CO_MODULE = mozilla/modules/libpr0n
-IMGLIB2_CO_FLAGS := -P
-ifdef MOZ_CO_FLAGS
-  IMGLIB2_CO_FLAGS := $(MOZ_CO_FLAGS)
-endif
-ifdef IMGLIB2_CO_TAG
-  IMGLIB2_CO_FLAGS := $(IMGLIB2_CO_FLAGS) -r $(IMGLIB2_CO_TAG)
-endif
-CVSCO_IMGLIB2 = $(CVS) $(CVS_FLAGS) co $(IMGLIB2_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(IMGLIB2_CO_MODULE)
-
-####################################
-# CVS defines for standalone modules
-#
-ifneq ($(BUILD_MODULES),all)
-  MOZ_CO_MODULE := $(filter-out $(NSPRPUB_DIR) security directory/c-sdk, $(BUILD_MODULE_CVS))
-  MOZ_CO_MODULE += allmakefiles.sh client.mk aclocal.m4 configure configure.in
-  MOZ_CO_MODULE += Makefile.in
-  MOZ_CO_MODULE := $(addprefix mozilla/, $(MOZ_CO_MODULE))
-
-  NOSUBDIRS_MODULE := $(addprefix mozilla/, $(BUILD_MODULE_CVS_NS))
-ifneq ($(NOSUBDIRS_MODULE),)
-  CVSCO_NOSUBDIRS := $(CVSCO) -l $(CVS_CO_DATE_FLAGS) $(NOSUBDIRS_MODULE)
-endif
-
-ifeq (,$(filter $(NSPRPUB_DIR), $(BUILD_MODULE_CVS)))
-  CVSCO_NSPR :=
-endif
-ifeq (,$(filter security security/manager, $(BUILD_MODULE_CVS)))
-  CVSCO_PSM :=
-  CVSCO_NSS :=
-endif
-ifeq (,$(filter directory/c-sdk, $(BUILD_MODULE_CVS)))
-  CVSCO_LDAPCSDK :=
-endif
-ifeq (,$(filter accessible, $(BUILD_MODULE_CVS)))
-  CVSCO_ACCESSIBLE :=
-endif
-ifeq (,$(filter gfx2, $(BUILD_MODULE_CVS)))
-  CVSCO_GFX2 :=
-endif
-ifeq (,$(filter modules/libpr0n, $(BUILD_MODULE_CVS)))
-  CVSCO_IMGLIB2 :=
-endif
-endif
-
-####################################
-# CVS defines for SeaMonkey
-#
-ifeq ($(MOZ_CO_MODULE),)
-  MOZ_CO_MODULE := SeaMonkeyAll
-endif
-CVSCO_SEAMONKEY := $(CVSCO) $(CVS_CO_DATE_FLAGS) $(MOZ_CO_MODULE)
-
-####################################
-# CVS defined for libart (pulled and built if MOZ_INTERNAL_LIBART_LGPL is set)
-#
-CVSCO_LIBART := $(CVSCO) $(CVS_CO_DATE_FLAGS) mozilla/other-licenses/libart_lgpl
-
-ifdef MOZ_INTERNAL_LIBART_LGPL
-FASTUPDATE_LIBART := fast_update $(CVSCO_LIBART)
-CHECKOUT_LIBART := cvs_co $(CVSCO_LIBART)
-else
-CHECKOUT_LIBART := true
-FASTUPDATE_LIBART := true
-endif
-
-####################################
-# CVS defines for Calendar (pulled and built if MOZ_CALENDAR is set)
-#
-CVSCO_CALENDAR := $(CVSCO) $(CVS_CO_DATE_FLAGS) mozilla/calendar
-
-ifdef MOZ_CALENDAR
-FASTUPDATE_CALENDAR := fast_update $(CVSCO_CALENDAR)
-CHECKOUT_CALENDAR := cvs_co $(CVSCO_CALENDAR)
-else
-CHECKOUT_CALENDAR := true
-FASTUPDATE_CALENDAR := true
-endif
-
-
-# because some cygwin tools can't handle native dos-drive paths & vice-versa
-# force configure to use a relative path for --srcdir
-# need a better check for win32
-# and we need to get OBJDIR earlier
-ifdef MOZ_TOOLS
-_tmpobjdir := $(shell cygpath -u $(OBJDIR))
-_abs2rel := $(shell cygpath -w $(TOPSRCDIR)/build/unix/abs2rel.pl | sed -e 's|\\|/|g')
-_OBJ2SRCPATH := $(shell $(_abs2rel) $(TOPSRCDIR) $(_tmpobjdir))
-endif 
-
-#######################################################################
-# Rules
-# 
-
-# Print out any options loaded from mozconfig.
-all build checkout clean depend distclean export libs install realclean::
-	@if test -f .mozconfig.out; then \
-	  cat .mozconfig.out; \
-	  rm -f .mozconfig.out; \
-	else true; \
-	fi
-
-ifdef _IS_FIRST_CHECKOUT
-all:: checkout build
-else
-all:: checkout alldep
-endif
-
-# Windows equivalents
-pull_all: checkout
-build_all: build
-build_all_dep: alldep
-build_all_depend: alldep
-clobber clobber_all: clean
-pull_and_build_all: checkout alldep
-
-# Do everything from scratch
-everything: checkout clean build
-
-####################################
-# CVS checkout
-#
-checkout::
-#	@: Backup the last checkout log.
-	@if test -f $(CVSCO_LOGFILE) ; then \
-	  mv $(CVSCO_LOGFILE) $(CVSCO_LOGFILE).old; \
-	else true; \
-	fi
-ifdef RUN_AUTOCONF_LOCALLY
-	@echo "Removing local configures" ; \
-	cd $(ROOTDIR) && \
-	$(RM) -f mozilla/configure mozilla/nsprpub/configure \
-		mozilla/directory/c-sdk/configure
-endif
-	@echo "checkout start: "`date` | tee $(CVSCO_LOGFILE)
-	@echo '$(CVSCO) mozilla/client.mk mozilla/build/unix/modules.mk'; \
-        cd $(ROOTDIR) && \
-	$(CVSCO) mozilla/client.mk mozilla/build/unix/modules.mk
-	@cd $(ROOTDIR) && $(MAKE) -f mozilla/client.mk real_checkout
-
-real_checkout:
-#	@: Start the checkout. Split the output to the tty and a log file. \
-#	 : If it fails, touch an error file because "tee" hides the error.
-	@failed=.cvs-failed.tmp; rm -f $$failed*; \
-	cvs_co() { echo "$$@" ; \
-	  ("$$@" || touch $$failed) 2>&1 | tee -a $(CVSCO_LOGFILE) && \
-	  if test -f $$failed; then false; else true; fi; }; \
-	cvs_co $(CVSCO_NSPR) && \
-	cvs_co $(CVSCO_NSS) && \
-	cvs_co $(CVSCO_PSM) && \
-        cvs_co $(CVSCO_LDAPCSDK) && \
-        cvs_co $(CVSCO_ACCESSIBLE) && \
-        cvs_co $(CVSCO_GFX2) && \
-        cvs_co $(CVSCO_IMGLIB2) && \
-	$(CHECKOUT_CALENDAR) && \
-	$(CHECKOUT_LIBART) && \
-	cvs_co $(CVSCO_SEAMONKEY) && \
-	cvs_co $(CVSCO_NOSUBDIRS)
-	@echo "checkout finish: "`date` | tee -a $(CVSCO_LOGFILE)
-#	@: Check the log for conflicts. ;
-	@conflicts=`egrep "^C " $(CVSCO_LOGFILE)` ;\
-	if test "$$conflicts" ; then \
-	  echo "$(MAKE): *** Conflicts during checkout." ;\
-	  echo "$$conflicts" ;\
-	  echo "$(MAKE): Refer to $(CVSCO_LOGFILE) for full log." ;\
-	  false; \
-	else true; \
-	fi
-ifdef RUN_AUTOCONF_LOCALLY
-	@echo Generating configures using $(AUTOCONF) ; \
-	cd $(TOPSRCDIR) && $(AUTOCONF) && \
-	cd $(TOPSRCDIR)/nsprpub && $(AUTOCONF) && \
-	cd $(TOPSRCDIR)/directory/c-sdk && $(AUTOCONF)
-endif
-
-fast-update:
-#	@: Backup the last checkout log.
-	@if test -f $(CVSCO_LOGFILE) ; then \
-	  mv $(CVSCO_LOGFILE) $(CVSCO_LOGFILE).old; \
-	else true; \
-	fi
-ifdef RUN_AUTOCONF_LOCALLY
-	@echo "Removing local configures" ; \
-	cd $(ROOTDIR) && \
-	$(RM) -f mozilla/configure mozilla/nsprpub/configure \
-		mozilla/directory/c-sdk/configure
-endif
-	@echo "checkout start: "`date` | tee $(CVSCO_LOGFILE)
-	@echo '$(CVSCO) mozilla/client.mk mozilla/build/unix/modules.mk'; \
-        cd $(ROOTDIR) && \
-	$(CVSCO) mozilla/client.mk mozilla/build/unix/modules.mk
-	@cd $(TOPSRCDIR) && \
-	$(MAKE) -f client.mk real_fast-update
-
-real_fast-update:
-#	@: Start the update. Split the output to the tty and a log file. \
-#	 : If it fails, touch an error file because "tee" hides the error.
-	@failed=.fast_update-failed.tmp; rm -f $$failed*; \
-	fast_update() { (config/cvsco-fast-update.pl $$@ || touch $$failed) 2>&1 | tee -a $(CVSCO_LOGFILE) && \
-	  if test -f $$failed; then false; else true; fi; }; \
-	cvs_co() { echo "$$@" ; \
-	  ("$$@" || touch $$failed) 2>&1 | tee -a $(CVSCO_LOGFILE) && \
-	  if test -f $$failed; then false; else true; fi; }; \
-	fast_update $(CVSCO_NSPR) && \
-	cd $(ROOTDIR) && \
-	failed=mozilla/.fast_update-failed.tmp && \
-	cvs_co $(CVSCO_NSS) && \
-	failed=.fast_update-failed.tmp && \
-	cd mozilla && \
-	fast_update $(CVSCO_PSM) && \
-	fast_update $(CVSCO_LDAPCSDK) && \
-	fast_update $(CVSCO_ACCESSIBLE) && \
-	fast_update $(CVSCO_GFX2) && \
-	fast_update $(CVSCO_IMGLIB2) && \
-	$(FASTUPDATE_CALENDAR) && \
-	$(FASTUPDATE_LIBART) && \
-	fast_update $(CVSCO_SEAMONKEY) && \
-	fast_update $(CVSCO_NOSUBDIRS)
-	@echo "fast_update finish: "`date` | tee -a $(CVSCO_LOGFILE)
-#	@: Check the log for conflicts. ;
-	@conflicts=`egrep "^C " $(CVSCO_LOGFILE)` ;\
-	if test "$$conflicts" ; then \
-	  echo "$(MAKE): *** Conflicts during fast-update." ;\
-	  echo "$$conflicts" ;\
-	  echo "$(MAKE): Refer to $(CVSCO_LOGFILE) for full log." ;\
-	  false; \
-	else true; \
-	fi
-ifdef RUN_AUTOCONF_LOCALLY
-	@echo Generating configures using $(AUTOCONF) ; \
-	cd $(TOPSRCDIR) && $(AUTOCONF) && \
-	cd $(TOPSRCDIR)/nsprpub && $(AUTOCONF) && \
-	cd $(TOPSRCDIR)/directory/c-sdk && $(AUTOCONF)
-endif
-
-####################################
-# Web configure
-
-WEBCONFIG_FILE  := $(HOME)/.mozconfig
-
-MOZCONFIG2CONFIGURATOR := build/autoconf/mozconfig2configurator
-webconfig:
-	@cd $(TOPSRCDIR); \
-	url=`$(MOZCONFIG2CONFIGURATOR) $(TOPSRCDIR)`; \
-	echo Running mozilla with the following url: ;\
-	echo ;\
-	echo $$url ;\
-	mozilla -remote "openURL($$url)" || \
-	netscape -remote "openURL($$url)" || \
-	mozilla $$url || \
-	netscape $$url ;\
-	echo ;\
-	echo   1. Fill out the form on the browser. ;\
-	echo   2. Save the results to $(WEBCONFIG_FILE)
-
-#####################################################
-# First Checkout
-
-ifdef _IS_FIRST_CHECKOUT
-# First time, do build target in a new process to pick up new files.
-build::
-	$(MAKE) -f $(TOPSRCDIR)/client.mk build
-else
-
-#####################################################
-# After First Checkout
-
-
-####################################
-# Configure
-
-CONFIG_STATUS := $(wildcard $(OBJDIR)/config.status)
-CONFIG_CACHE  := $(wildcard $(OBJDIR)/config.cache)
-
-ifdef RUN_AUTOCONF_LOCALLY
-EXTRA_CONFIG_DEPS := \
-	$(TOPSRCDIR)/aclocal.m4 \
-	$(wildcard $(TOPSRCDIR)/build/autoconf/*.m4) \
-	$(NULL)
-
-$(TOPSRCDIR)/configure: $(TOPSRCDIR)/configure.in $(EXTRA_CONFIG_DEPS)
-	@echo Generating $@ using autoconf
-	cd $(TOPSRCDIR); $(AUTOCONF)
-endif
-
-CONFIG_STATUS_DEPS_L10N := $(wildcard $(TOPSRCDIR)/l10n/makefiles.all)
-
-CONFIG_STATUS_DEPS := \
-	$(TOPSRCDIR)/configure \
-	$(TOPSRCDIR)/allmakefiles.sh \
-	$(TOPSRCDIR)/.mozconfig.mk \
-	$(wildcard $(TOPSRCDIR)/nsprpub/configure) \
-	$(wildcard $(TOPSRCDIR)/directory/c-sdk/configure) \
-	$(wildcard $(TOPSRCDIR)/mailnews/makefiles) \
-	$(CONFIG_STATUS_DEPS_L10N) \
-	$(wildcard $(TOPSRCDIR)/themes/makefiles) \
-	$(NULL)
-
-# configure uses the program name to determine @srcdir@. Calling it without
-#   $(TOPSRCDIR) will set @srcdir@ to "."; otherwise, it is set to the full
-#   path of $(TOPSRCDIR).
-ifeq ($(TOPSRCDIR),$(OBJDIR))
-  CONFIGURE := ./configure
-else
-  CONFIGURE := $(TOPSRCDIR)/configure
-endif
-
-ifdef _OBJ2SRCPATH
-CONFIGURE_ARGS := --srcdir=$(_OBJ2SRCPATH) $(CONFIGURE_ARGS)
-endif
-
-$(OBJDIR)/Makefile $(OBJDIR)/config.status: $(CONFIG_STATUS_DEPS)
-	@if test ! -d $(OBJDIR); then $(MKDIR) $(OBJDIR); else true; fi
-	@echo cd $(OBJDIR);
-	@echo $(CONFIGURE) $(CONFIGURE_ARGS)
-	@cd $(OBJDIR) && $(CONFIGURE_ENV_ARGS) $(CONFIGURE) $(CONFIGURE_ARGS) \
-	  || ( echo "*** Fix above errors and then restart with\
-               \"$(MAKE) -f client.mk build\"" && exit 1 )
-	@touch $(OBJDIR)/Makefile
-
-ifdef CONFIG_STATUS
-$(OBJDIR)/config/autoconf.mk: $(TOPSRCDIR)/config/autoconf.mk.in
-	cd $(OBJDIR); \
-	  CONFIG_FILES=config/autoconf.mk ./config.status
-endif
-
-
-####################################
-# Depend
-
-depend:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
-	$(MOZ_MAKE) export && $(MOZ_MAKE) depend
-
-####################################
-# Build it
-
-build::  $(OBJDIR)/Makefile $(OBJDIR)/config.status
-	$(MOZ_MAKE)
-
-####################################
-# Other targets
-
-# Pass these target onto the real build system
-install export libs clean realclean distclean alldep:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
-	$(MOZ_MAKE) $@
-
-cleansrcdir:
-	@cd $(TOPSRCDIR); \
-        if [ -f webshell/embed/gtk/Makefile ]; then \
-          $(MAKE) -C webshell/embed/gtk distclean; \
-        fi; \
-	if [ -f Makefile ]; then \
-	  $(MAKE) distclean ; \
-	else \
-	  echo "Removing object files from srcdir..."; \
-	  rm -fr `find . -type d \( -name .deps -print -o -name CVS \
-	          -o -exec test ! -d {}/CVS \; \) -prune \
-	          -o \( -name '*.[ao]' -o -name '*.so' \) -type f -print`; \
-	   build/autoconf/clean-config.sh; \
-	fi;
-
-# (! IS_FIRST_CHECKOUT)
-endif
-
-.PHONY: checkout real_checkout depend build export libs alldep install clean realclean distclean cleansrcdir pull_all build_all clobber clobber_all pull_and_build_all everything

mozilla/js/rhino/Makefile

@@ -0,0 +1,214 @@
+#! gmake
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is Rhino code, released
+# May 6, 1998.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1999 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#
+# Alternatively, the contents of this file may be used under the
+# terms of the GNU Public License (the "GPL"), in which case the
+# provisions of the GPL are applicable instead of those above.
+# If you wish to allow use of your version of this file only
+# under the terms of the GPL and not to allow others to use your
+# version of this file under the NPL, indicate your decision by
+# deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL.  If you do not delete
+# the provisions above, a recipient may use your version of this
+# file under either the NPL or the GPL.
+
+#
+# Makefile for javascript in java.
+#
+
+# This makefile is intended for packaging releases, and probably isn't
+# suitable for production use - it doesn't attempt to do understand
+# java dependencies beyond the package level.
+#
+# The makefiles for the subdirectories included in this package are
+# intended to be called by this makefile with the proper CLASSDIR,
+# PATH_PREFIX etc. variables.  Makefiles in subdirectories are
+# actually executed in the toplevel directory, with the PATH_PREFIX
+# variable set to the subdirectory where the makefile is located.
+#
+# Initial version courtesy Mike Ang.
+# Next version by Mike McCabe
+
+# Don't include SHELL define (per GNU manual recommendation) because it
+# breaks WinNT (with GNU make) builds.
+# SHELL = /bin/sh
+
+# Some things we might want to tweek.
+
+CLASSDIR = classes
+
+PACKAGE_NAME = org.mozilla.javascript
+PACKAGE_PATH = org/mozilla/javascript
+
+# jar filenames and the directories that build them.
+JS_JAR = js.jar
+JS_DIR = $(PACKAGE_PATH)
+JSTOOLS_JAR = jstools.jar
+JSTOOLS_DIR = $(PACKAGE_PATH)/tools
+
+JARS = $(JS_JAR) $(JSTOOLS_JAR)
+
+# It's not polite to store toplevel files in a tarball or zip files.
+# What is the name of the toplevel directory to store files in?
+# XXX we should probably add versioning to this.
+DIST_DIR = jsjava
+
+# XXX test this with sj
+JAVAC = javac
+
+# We don't define JFLAGS but we do export it to child
+# builds in case it's defined by the environment.
+# To build optimized (with javac) say 'make JFLAGS=-O'
+
+GZIP = gzip
+ZIP = zip
+UNZIP = unzip
+
+# Shouldn't need to change anything below here.
+
+# For Windows NT builds (under GNU make).
+ifeq ($(OS_TARGET), WINNT)
+CLASSPATHSEP = '\\;'
+else
+CLASSPATHSEP = :
+endif
+
+# Make compatibility - use these instead of gmake 'export VARIABLE'
+EXPORTS = CLASSDIR=$(CLASSDIR) JAVAC=$(JAVAC) JFLAGS=$(JFLAGS) SHELL=$(SHELL) \
+	PACKAGE_PATH=$(PACKAGE_PATH) PACKAGE_NAME=$(PACKAGE_NAME)
+
+helpmessage : FORCE
+	@echo 'Targets include:'
+	@echo '  all - make jars, examples'
+	@echo '  jars - make js.jar, jstools.jar'
+	@echo '  fast - quick-and-dirty "make jars", for development'
+	@echo '  examples - build the .class files in the examples directory'
+	@echo '  check - perform checks on the source.'
+	@echo '  clean - remove intermediate files'
+	@echo '  clobber - make clean, and remove .jar files'
+	@echo '  zip - make a distribution .zip file'
+	@echo '  zip-source - make a distribution .zip file, with source'
+	@echo '  tar - make a distribution .tar.gz file'
+	@echo '  tar-source - make a distribution .tar.gz, with source'
+	@echo
+	@echo 'Define OS_TARGET to "WINNT" to build on Windows NT with GNU make.'
+	@echo
+
+all : jars examples
+
+jars : $(JARS)
+
+fast : fast_$(JS_JAR) $(JSTOOLS_JAR)
+
+# Always call the sub-Makefile - which may decide that the jar is up to date.
+$(JS_JAR) : FORCE
+	$(MAKE) -f $(JS_DIR)/Makefile JAR=$(@) $(EXPORTS) \
+		PATH_PREFIX=$(JS_DIR) \
+		CLASSPATH=.
+
+fast_$(JS_JAR) :
+	$(MAKE) -f $(JS_DIR)/Makefile JAR=$(JS_JAR) $(EXPORTS) \
+		PATH_PREFIX=$(JS_DIR) \
+		CLASSPATH=. \
+		fast
+
+$(JSTOOLS_JAR) : $(JS_JAR) FORCE
+	$(MAKE) -f $(JSTOOLS_DIR)/Makefile JAR=$(@) $(EXPORTS) \
+		PATH_PREFIX=$(JSTOOLS_DIR) \
+		CLASSPATH=./$(JS_JAR)$(CLASSPATHSEP).
+
+examples : $(JS_JAR) FORCE
+	$(MAKE) -f examples/Makefile $(EXPORTS) \
+		PATH_PREFIX=examples \
+		CLASSPATH=./$(JS_JAR)
+
+# We ask the subdirs to update their MANIFESTs
+MANIFEST : FORCE
+	$(MAKE) -f $(JS_DIR)/Makefile JAR=$(JS_JAR) $(EXPORTS) \
+		PATH_PREFIX=$(JS_DIR) $(JS_DIR)/MANIFEST
+	$(MAKE) -f $(JSTOOLS_DIR)/Makefile JAR=$(JSTOOLS_JAR) $(EXPORTS) \
+		PATH_PREFIX=$(JSTOOLS_DIR) $(JSTOOLS_DIR)/MANIFEST
+	$(MAKE) -f examples/Makefile $(EXPORTS) \
+		PATH_PREFIX=examples examples/MANIFEST
+# so ls below always has something to work on
+	touch MANIFEST
+# examples/Makefile doesn't get included in the
+# MANIFEST file, (which is used to create the non-source distribution) so
+# we include it here.
+	cat examples/MANIFEST $(JS_DIR)/MANIFEST \
+		$(JSTOOLS_DIR)/MANIFEST \
+		| xargs ls MANIFEST README.html \
+		  $(JARS) \
+		  Makefile examples/Makefile \
+		    > $(@)
+
+# Make a MANIFEST file containing only the binaries and documentation.
+# This could be abstracted further...
+MANIFEST_binonly : MANIFEST
+	cat examples/MANIFEST \
+	| xargs ls $(JARS) README.html MANIFEST > MANIFEST
+
+# A subroutine - not intended to be called from outside the makefile.
+do_zip : 
+# Make sure we get a fresh one
+	- rm -r $(DIST_DIR)
+	- mkdir $(DIST_DIR)
+	- rm    $(DIST_DIR).zip
+	cat MANIFEST | xargs $(ZIP) -0 -q $(DIST_DIR).zip
+	mv $(DIST_DIR).zip $(DIST_DIR)
+	cd $(DIST_DIR) ; \
+		$(UNZIP) -q $(DIST_DIR).zip ; \
+		rm $(DIST_DIR).zip
+	$(ZIP) -r -9 -q $(DIST_DIR).zip $(DIST_DIR)
+	- rm -r $(DIST_DIR)
+
+zip : check jars examples MANIFEST_binonly do_zip
+
+zip-source : check jars examples MANIFEST do_zip
+
+# A subroutine - not intended to be called from outside the makefile.
+do_tar :
+	- rm -r $(DIST_DIR)
+	- mkdir $(DIST_DIR)
+	- rm $(DIST_DIR).tar $(DIST_DIR).tar.gz
+	cat MANIFEST | xargs tar cf $(DIST_DIR).tar
+	mv $(DIST_DIR).tar $(DIST_DIR)
+	cd $(DIST_DIR) ; \
+		tar xf $(DIST_DIR).tar ; \
+		rm $(DIST_DIR).tar
+	tar cf $(DIST_DIR).tar $(DIST_DIR)
+	- rm -r $(DIST_DIR)
+	$(GZIP) -9 $(DIST_DIR).tar
+
+tar: check jars examples MANIFEST_binonly do_tar
+
+tar-source : check jars examples MANIFEST do_tar
+
+# These commands just get passed to the respective sub-Makefiles.
+clean clobber check:
+	$(MAKE) -f $(JS_DIR)/Makefile $(EXPORTS) JAR=$(JS_JAR) \
+		PATH_PREFIX=$(JS_DIR) $(@)
+	$(MAKE) -f $(JSTOOLS_DIR)/Makefile $(EXPORTS) JAR=$(JSTOOLS_JAR) \
+		PATH_PREFIX=$(JSTOOLS_DIR) $(@)
+	$(MAKE) -f examples/Makefile $(EXPORTS) PATH_PREFIX=examples $(@)
+
+#emulate .PHONY
+FORCE :

mozilla/js/rhino/README.html

@@ -0,0 +1,46 @@
+<html>
+<!-- 
+   - The contents of this file are subject to the Netscape Public
+   - License Version 1.1 (the "License"); you may not use this file
+   - except in compliance with the License. You may obtain a copy of
+   - the License at http://www.mozilla.org/NPL/
+   - 
+   - Software distributed under the License is distributed on an "AS
+   - IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+   - implied. See the License for the specific language governing
+   - rights and limitations under the License.
+   - 
+   - The Original Code is Rhino code, released
+   - May 6, 1999.
+   - 
+   - The Initial Developer of the Original Code is Netscape
+   - Communications Corporation. Portions created by Netscape are
+   - Copyright (C) 1998-1999 Netscape Communications Corporation. All
+   - Rights Reserved.
+   - 
+   - Contributor(s):
+   - Norris Boyd
+   - 
+   - Alternatively, the contents of this file may be used under the
+   - terms of the GNU Public License (the "GPL"), in which case the
+   - provisions of the GPL are applicable instead of those above.
+   - If you wish to allow use of your version of this file only
+   - under the terms of the GPL and not to allow others to use your
+   - version of this file under the NPL, indicate your decision by
+   - deleting the provisions above and replace them with the notice
+   - and other provisions required by the GPL.  If you do not delete
+   - the provisions above, a recipient may use your version of this
+   - file under either the NPL or the GPL.
+  -->
+<body>
+<h1>
+<span CLASS=LXRSHORTDESC>
+Rhino: JavaScript in Java<p>
+</span>
+</h1>
+<span CLASS=LXRLONGDESC>
+Rhino is an implementation of JavaScript in Java. Documentation can be found 
+<a href="http://www.mozilla.org/js/rhino/rhino.html">here</a>.
+</span>
+</body>
+</html>

mozilla/js/rhino/examples/Control.java

@@ -0,0 +1,105 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1998.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+import org.mozilla.javascript.*;
+
+/**
+ * Example of controlling the JavaScript execution engine.
+ *
+ * We evaluate a script and then manipulate the result.
+ * 
+ */
+public class Control {
+
+    /**
+     * Main entry point.
+     *
+     * Process arguments as would a normal Java program. Also
+     * create a new Context and associate it with the current thread.
+     * Then set up the execution environment and begin to
+     * execute scripts.
+     */
+    public static void main(String[] args) {
+        Context cx = Context.enter();
+
+        // Set version to JavaScript1.2 so that we get object-literal style
+        // printing instead of "[object Object]"
+        cx.setLanguageVersion(Context.VERSION_1_2);
+
+        // Initialize the standard objects (Object, Function, etc.)
+        // This must be done before scripts can be executed.
+        Scriptable scope = cx.initStandardObjects(null);
+
+        // Now we can evaluate a script. Let's create a new object
+        // using the object literal notation.
+        Object result = null;
+        try {
+            result = cx.evaluateString(scope, "obj = {a:1, b:['x','y']}",
+                                              "MySource", 1, null);
+        }
+        catch (JavaScriptException jse) {
+            // ignore
+        }
+
+        Scriptable obj = (Scriptable) scope.get("obj", scope);
+
+        // Should print "obj == result" (Since the result of an assignment
+        // expression is the value that was assigned)
+        System.out.println("obj " + (obj == result ? "==" : "!=") +
+                           " result");
+
+        // Should print "obj.a == 1"
+        System.out.println("obj.a == " + obj.get("a", obj));
+
+        Scriptable b = (Scriptable) obj.get("b", obj);
+
+        // Should print "obj.b[0] == x"
+        System.out.println("obj.b[0] == " + b.get(0, b));
+
+        // Should print "obj.b[1] == y"
+        System.out.println("obj.b[1] == " + b.get(1, b));
+
+        try {
+            // Should print {a:1, b:["x", "y"]}
+            Function fn = (Function) ScriptableObject.getProperty(obj, "toString");
+            System.out.println(fn.call(cx, scope, obj, new Object[0]));
+        } catch (JavaScriptException e) {
+            // ignore
+        } 
+
+        cx.exit();
+    }
+
+}
+

mozilla/js/rhino/examples/Counter.java

@@ -0,0 +1,55 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1998.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+import org.mozilla.javascript.*;
+
+public class Counter extends ScriptableObject {
+    // The zero-argument constructor used by Rhino runtime to create instances
+    public Counter() { }
+
+    // Method jsConstructor defines the JavaScript constructor 
+    public void jsConstructor(int a) { count = a; }
+
+    // The class name is defined by the getClassName method
+    public String getClassName() { return "Counter"; }
+
+    // The method jsGet_count defines the count property. 
+    public int jsGet_count() { return count++; }
+
+    // Methods can be defined using the jsFunction_ prefix. Here we define 
+    //  resetCount for JavaScript. 
+    public void jsFunction_resetCount() { count = 0; }
+
+    private int count;
+}

mozilla/js/rhino/examples/DynamicScopes.java

@@ -0,0 +1,178 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1998.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-2000 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+import org.mozilla.javascript.*;
+
+/**
+ * Example of controlling the JavaScript with multiple scopes and threads.
+ */
+public class DynamicScopes {
+
+    /**
+     * Main entry point.
+     *
+     * Set up the shared scope and then spawn new threads that execute
+     * relative to that shared scope. Try compiling functions with and 
+     * without dynamic scope to see the effect.
+     * 
+     * The expected output is
+     * <pre>
+     * sharedScope
+     * sharedScope
+     * sharedScope
+     * thread0
+     * thread1
+     * thread2
+     * </pre>
+     * The final three lines may be permuted in any order depending on
+     * thread scheduling.
+     */
+    public static void main(String[] args) 
+        throws JavaScriptException
+    {
+        Context cx = Context.enter();
+        try {
+            cx.setCompileFunctionsWithDynamicScope(false);
+            runScripts(cx);
+            cx.setCompileFunctionsWithDynamicScope(true);
+            runScripts(cx);
+        } finally {
+            cx.exit();
+        }
+    }
+    
+    static void runScripts(Context cx) 
+        throws JavaScriptException
+    {
+        // Initialize the standard objects (Object, Function, etc.)
+        // This must be done before scripts can be executed. The call
+        // returns a new scope that we will share.
+        Scriptable scope = cx.initStandardObjects(null);
+
+        // Now we can evaluate a script and functions will be compiled to
+        // use dynamic scope if the Context is so initialized.
+        String source = "var x = 'sharedScope';" +
+                        "function f() { return x; }";
+        cx.evaluateString(scope, source, "MySource", 1, null);
+
+        // Now we spawn some threads that execute a script that calls the 
+        // function 'f'. The scope chain looks like this:
+        // <pre>
+        //            ------------------
+        //           |   shared scope   |
+        //            ------------------
+        //                    ^
+        //                    |
+        //            ------------------
+        //           | per-thread scope |
+        //            ------------------
+        //                    ^
+        //                    |
+        //            ------------------
+        //           | f's activation   |
+        //            ------------------
+        // </pre>
+        // Both the shared scope and the per-thread scope have variables 'x'
+        // defined in them. If 'f' is compiled with dynamic scope enabled, 
+        // the 'x' from the per-thread scope will be used. Otherwise, the 'x'
+        // from the shared scope will be used. The 'x' defined in 'g' (which
+        // calls 'f') should not be seen by 'f'.
+        final int threadCount = 3;
+        Thread[] t = new Thread[threadCount];
+        for (int i=0; i < threadCount; i++) {
+            String script = "function g() { var x = 'local'; return f(); }" +
+                            "java.lang.System.out.println(g());";
+            t[i] = new Thread(new PerThread(scope, script, 
+                                            "thread" + i));
+        }
+        for (int i=0; i < threadCount; i++)
+            t[i].start();
+        // Don't return in this thread until all the spawned threads have 
+        // completed.
+        for (int i=0; i < threadCount; i++) {
+            try {
+                t[i].join();
+            } catch (InterruptedException e) {
+            }
+        }
+    }
+    
+    static class PerThread implements Runnable {
+    
+        PerThread(Scriptable scope, String script, String x) {
+            this.scope = scope;
+            this.script = script;
+            this.x = x;
+        }   
+        
+        public void run() {
+            // We need a new Context for this thread.
+            Context cx = Context.enter();
+            try {
+                // We can share the scope.
+                Scriptable threadScope = cx.newObject(scope);
+                threadScope.setPrototype(scope);
+                
+                // We want "threadScope" to be a new top-level 
+                // scope, so set its parent scope to null. This 
+                // means that any variables created by assignments
+                // will be properties of "threadScope".
+                threadScope.setParentScope(null);
+                
+                // Create a JavaScript property of the thread scope named
+                // 'x' and save a value for it.
+                threadScope.put("x", threadScope, x);
+                cx.evaluateString(threadScope, script, "threadScript", 1, null);
+            }
+            catch (NotAFunctionException jse) {
+                // ignore
+            }
+            catch (PropertyException jse) {
+                // ignore
+            }
+            catch (JavaScriptException jse) {
+                // ignore
+            }
+            finally {
+                Context.exit();
+            }
+        }
+        private Scriptable scope;
+        private String script;
+        private String x;
+    }
+
+}
+

mozilla/js/rhino/examples/File.java

@@ -0,0 +1,356 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1998.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-2000 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s):
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+import org.mozilla.javascript.*;
+import java.io.*;
+import java.util.Vector;
+
+/**
+ * Define a simple JavaScript File object.
+ *
+ * This isn't intended to be any sort of definitive attempt at a
+ * standard File object for JavaScript, but instead is an example
+ * of a more involved definition of a host object.
+ *
+ * Example of use of the File object:
+ * <pre>
+ * js> defineClass("File")
+ * js> file = new File("myfile.txt");
+ * [object File]
+ * js> file.writeLine("one");                       <i>only now is file actually opened</i>
+ * js> file.writeLine("two");
+ * js> file.writeLine("thr", "ee");
+ * js> file.close();                                <i>must close file before we can reopen for reading</i>
+ * js> var a = file.readLines();                    <i>creates and fills an array with the contents of the file</i>
+ * js> a;
+ * one,two,three
+ * js>
+ * </pre>
+ *
+ *
+ * File errors or end-of-file signaled by thrown Java exceptions will
+ * be wrapped as JavaScript exceptions when called from JavaScript,
+ * and may be caught within JavaScript.
+ *
+ * @author Norris Boyd 
+ */
+public class File extends ScriptableObject {
+
+    /**
+     * The zero-parameter constructor.
+     *
+     * When Context.defineClass is called with this class, it will
+     * construct File.prototype using this constructor.
+     */
+    public File() {
+    }
+
+    /**
+     * The Java method defining the JavaScript File constructor.
+     *
+     * If the constructor has one or more arguments, and the
+     * first argument is not undefined, the argument is converted
+     * to a string as used as the filename.<p>
+     *
+     * Otherwise System.in or System.out is assumed as appropriate
+     * to the use.
+     */
+    public static Scriptable jsConstructor(Context cx, Object[] args,
+                                           Function ctorObj, 
+                                           boolean inNewExpr)
+    {
+        File result = new File();
+        if (args.length == 0 || args[0] == Context.getUndefinedValue()) {
+            result.name = "";
+            result.file = null;
+        } else {
+            result.name = Context.toString(args[0]);
+            result.file = new java.io.File(result.name);
+        }
+        return result;
+    }
+
+    /**
+     * Returns the name of this JavaScript class, "File".
+     */
+    public String getClassName() {
+        return "File";
+    }
+
+    /**
+     * Get the name of the file.
+     *
+     * Used to define the "name" property.
+     */
+    public String jsGet_name() {
+        return name;
+    }
+
+    /**
+     * Read the remaining lines in the file and return them in an array.
+     *
+     * Implements a JavaScript function.<p>
+     *
+     * This is a good example of creating a new array and setting
+     * elements in that array.
+     *
+     * @exception IOException if an error occurred while accessing the file
+     *            associated with this object
+     * @exception JavaScriptException if a JavaScript exception occurred
+     *            while creating the result array
+     */
+    public Object jsFunction_readLines()
+        throws IOException, JavaScriptException
+    {
+        Vector v = new Vector();
+        String s;
+        while ((s = jsFunction_readLine()) != null) {
+            v.addElement(s);
+        }
+        Object[] lines = new Object[v.size()];
+        v.copyInto(lines);
+
+        Scriptable scope = ScriptableObject.getTopLevelScope(this);
+        Scriptable result;
+        try {
+            Context cx = Context.getCurrentContext();
+            result = cx.newObject(scope, "Array", lines);
+        } catch (PropertyException e) {
+            throw Context.reportRuntimeError(e.getMessage());
+        } catch (NotAFunctionException e) {
+            throw Context.reportRuntimeError(e.getMessage());
+        }
+
+        return result;
+    }
+
+    /**
+     * Read a line.
+     *
+     * Implements a JavaScript function.
+     * @exception IOException if an error occurred while accessing the file
+     *            associated with this object, or EOFException if the object
+     *            reached the end of the file
+     */
+    public String jsFunction_readLine() throws IOException {
+        return getReader().readLine();
+    }
+
+    /**
+     * Read a character.
+     *
+     * @exception IOException if an error occurred while accessing the file
+     *            associated with this object, or EOFException if the object
+     *            reached the end of the file
+     */
+    public String jsFunction_readChar() throws IOException {
+        int i = getReader().read();
+        if (i == -1)
+            return null;
+        char[] charArray = { (char) i };
+        return new String(charArray);
+    }
+
+    /**
+     * Write strings.
+     *
+     * Implements a JavaScript function. <p>
+     *
+     * This function takes a variable number of arguments, converts
+     * each argument to a string, and writes that string to the file.
+     * @exception IOException if an error occurred while accessing the file
+     *            associated with this object
+     */
+    public static void jsFunction_write(Context cx, Scriptable thisObj,
+                                        Object[] args, Function funObj)
+        throws IOException
+    {
+        write0(thisObj, args, false);
+    }
+
+    /**
+     * Write strings and a newline.
+     *
+     * Implements a JavaScript function.
+     * @exception IOException if an error occurred while accessing the file
+     *            associated with this object
+     *
+     */
+    public static void jsFunction_writeLine(Context cx, Scriptable thisObj,
+                                            Object[] args, Function funObj)
+        throws IOException
+    {
+        write0(thisObj, args, true);
+    }
+
+    public int jsGet_lineNumber()
+        throws FileNotFoundException
+    {
+        return getReader().getLineNumber();
+    }
+
+    /**
+     * Close the file. It may be reopened.
+     *
+     * Implements a JavaScript function.
+     * @exception IOException if an error occurred while accessing the file
+     *            associated with this object
+     */
+    public void jsFunction_close() throws IOException {
+        if (reader != null) {
+            reader.close();
+            reader = null;
+        } else if (writer != null) {
+            writer.close();
+            writer = null;
+        }
+    }
+
+    /**
+     * Finalizer.
+     *
+     * Close the file when this object is collected.
+     */
+    public void finalize() {
+        try {
+            jsFunction_close();
+        }
+        catch (IOException e) {
+        }
+    }
+
+    /**
+     * Get the Java reader.
+     */
+    public Object jsFunction_getReader() {
+        if (reader == null)
+            return null;
+        // Here we use toObject() to "wrap" the BufferedReader object
+        // in a Scriptable object so that it can be manipulated by
+        // JavaScript.
+        Scriptable parent = ScriptableObject.getTopLevelScope(this);
+        return Context.toObject(reader, parent);
+    }
+
+    /**
+     * Get the Java writer.
+     *
+     * @see File#jsFunction_getReader
+     *
+     */
+    public Object jsFunction_getWriter() {
+        if (writer == null)
+            return null;
+        Scriptable parent = ScriptableObject.getTopLevelScope(this);
+        return Context.toObject(writer, parent);
+    }
+
+    /**
+     * Get the reader, checking that we're not already writing this file.
+     */
+    private LineNumberReader getReader() throws FileNotFoundException {
+        if (writer != null) {
+            throw Context.reportRuntimeError("already writing file \""
+                                             + name
+                                             + "\"");
+        }
+        if (reader == null)
+            reader = new LineNumberReader(file == null
+                                        ? new InputStreamReader(System.in)
+                                        : new FileReader(file));
+        return reader;
+    }
+
+    /**
+     * Perform the guts of write and writeLine.
+     *
+     * Since the two functions differ only in whether they write a
+     * newline character, move the code into a common subroutine.
+     *
+     */
+    private static void write0(Scriptable thisObj, Object[] args, boolean eol)
+        throws IOException
+    {
+        File thisFile = checkInstance(thisObj);
+        if (thisFile.reader != null) {
+            throw Context.reportRuntimeError("already writing file \""
+                                             + thisFile.name
+                                             + "\"");
+        }
+        if (thisFile.writer == null)
+            thisFile.writer = new BufferedWriter(
+                thisFile.file == null ? new OutputStreamWriter(System.out)
+                                      : new FileWriter(thisFile.file));
+        for (int i=0; i < args.length; i++) {
+            String s = Context.toString(args[i]);
+            thisFile.writer.write(s, 0, s.length());
+        }
+        if (eol)
+            thisFile.writer.newLine();
+    }
+
+    /**
+     * Perform the instanceof check and return the downcasted File object.
+     *
+     * This is necessary since methods may reside in the File.prototype
+     * object and scripts can dynamically alter prototype chains. For example:
+     * <pre>
+     * js> defineClass("File");
+     * js> o = {};
+     * [object Object]
+     * js> o.__proto__ = File.prototype;
+     * [object File]
+     * js> o.write("hi");
+     * js: called on incompatible object
+     * </pre>
+     * The runtime will take care of such checks when non-static Java methods
+     * are defined as JavaScript functions.
+     */
+    private static File checkInstance(Scriptable obj) {
+        if (obj == null || !(obj instanceof File)) {
+            throw Context.reportRuntimeError("called on incompatible object");
+        }
+        return (File) obj;
+    }
+
+    /**
+     * Some private data for this class.
+     */
+    private String name;
+    private java.io.File file;  // may be null, meaning to use System.out or .in
+    private LineNumberReader reader;
+    private BufferedWriter writer;
+}
+

mozilla/js/rhino/examples/Foo.java

@@ -0,0 +1,168 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1998.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+import org.mozilla.javascript.*;
+
+/**
+ * An example host object class.
+ *
+ * Here's a shell session showing the Foo object in action:
+ * <pre>
+ * js> defineClass("Foo")
+ * js> foo = new Foo();         <i>A constructor call, see <a href="#Foo">Foo</a> below.</i>
+ * [object Foo]                 <i>The "Foo" here comes from <a href"#getClassName">getClassName</a>.</i>
+ * js> foo.counter;             <i>The counter property is defined by the <code>defineProperty</code></i>
+ * 0                            <i>call below and implemented by the <a href="#getCounter">getCounter</a></i>
+ * js> foo.counter;             <i>method below.</i>
+ * 1
+ * js> foo.counter;
+ * 2
+ * js> foo.resetCounter();      <i>Results in a call to <a href="#resetCounter">resetCounter</a>.</i>
+ * js> foo.counter;             <i>Now the counter has been reset.</i>
+ * 0
+ * js> foo.counter;
+ * 1
+ * js> bar = new Foo(37);       <i>Create a new instance.</i>
+ * [object Foo]
+ * js> bar.counter;             <i>This instance's counter is distinct from</i>
+ * 37                           <i>the other instance's counter.</i>
+ * js> foo.varargs(3, "hi");    <i>Calls <a href="#varargs">varargs</a>.</i>
+ * this = [object Foo]; args = [3, hi]
+ * js> foo[7] = 34;             <i>Since we extended ScriptableObject, we get</i>
+ * 34                           <i>all the behavior of a JavaScript object</i>
+ * js> foo.a = 23;              <i>for free.</i>
+ * 23
+ * js> foo.a + foo[7];
+ * 57
+ * js>
+ * </pre>
+ *
+ * @see org.mozilla.javascript.Context
+ * @see org.mozilla.javascript.Scriptable
+ * @see org.mozilla.javascript.ScriptableObject
+ *
+ * @author Norris Boyd
+ */
+
+public class Foo extends ScriptableObject {
+
+    /**
+     * The zero-parameter constructor.
+     *
+     * When Context.defineClass is called with this class, it will
+     * construct Foo.prototype using this constructor.
+     */
+    public Foo() {
+    }
+
+    /**
+     * The Java method defining the JavaScript Foo constructor.
+     *
+     * Takes an initial value for the counter property.
+     * Note that in the example Shell session above, we didn't
+     * supply a argument to the Foo constructor. This means that
+     * the Undefined value is used as the value of the argument,
+     * and when the argument is converted to an integer, Undefined
+     * becomes 0.
+     */
+    public Foo(int counterStart) {
+        counter = counterStart;
+    }
+
+    /**
+     * Returns the name of this JavaScript class, "Foo".
+     */
+    public String getClassName() {
+        return "Foo";
+    }
+
+    /**
+     * The Java method defining the JavaScript resetCounter function.
+     *
+     * Resets the counter to 0.
+     */
+    public void jsFunction_resetCounter() {
+        counter = 0;
+    }
+
+    /**
+     * The Java method implementing the getter for the counter property.
+     * <p>
+     * If "setCounter" had been defined in this class, the runtime would
+     * call the setter when the property is assigned to.
+     */
+    public int jsGet_counter() {
+        return counter++;
+    }
+
+    /**
+     * An example of a variable-arguments method.
+     *
+     * All variable arguments methods must have the same number and
+     * types of parameters, and must be static. <p>
+     * @param cx the Context of the current thread
+     * @param thisObj the JavaScript 'this' value.
+     * @param args the array of arguments for this call
+     * @param funObj the function object of the invoked JavaScript function
+     *               This value is useful to compute a scope using
+     *               Context.getTopLevelScope().
+     * @return computes the string values and types of 'this' and
+     * of each of the supplied arguments and returns them in a string.
+     *
+     * @exception ThreadAssociationException if the current
+     *            thread is not associated with a Context
+     * @see org.mozilla.javascript.ScriptableObject#getTopLevelScope
+     */
+    public static Object jsFunction_varargs(Context cx, Scriptable thisObj,
+                                            Object[] args, Function funObj)
+    {
+        StringBuffer buf = new StringBuffer();
+        buf.append("this = ");
+        buf.append(Context.toString(thisObj));
+        buf.append("; args = [");
+        for (int i=0; i < args.length; i++) {
+            buf.append(Context.toString(args[i]));
+            if (i+1 != args.length)
+                buf.append(", ");
+        }
+        buf.append("]");
+        return buf.toString();
+    }
+
+    /**
+     * A piece of private data for this class.
+     */
+    private int counter;
+}
+

mozilla/js/rhino/examples/Makefile

@@ -0,0 +1,59 @@
+#! gmake
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is Rhino code, released
+# May 6, 1998.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1999 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#
+# Alternatively, the contents of this file may be used under the
+# terms of the GNU Public License (the "GPL"), in which case the
+# provisions of the GPL are applicable instead of those above.
+# If you wish to allow use of your version of this file only
+# under the terms of the GPL and not to allow others to use your
+# version of this file under the NPL, indicate your decision by
+# deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL.  If you do not delete
+# the provisions above, a recipient may use your version of this
+# file under either the NPL or the GPL.
+
+#
+# Makefile for the examples directory.
+#
+# This Makefile just calls $(JAVAC) on all the .java files.  This
+# Makefile is intended to be called from the toplevel Makefile.
+#
+
+JSFILES = $(PATH_PREFIX)/*.js
+SOURCES = $(PATH_PREFIX)/*.java
+CLASSES = $(PATH_PREFIX)/*.class
+
+$(CLASSES) : $(SOURCES)
+	$(JAVAC) $(JFLAGS) $(SOURCES)
+
+clean :
+	- rm $(CLASSES) $(PATH_PREFIX)/MANIFEST
+
+clobber : clean
+
+check :
+
+$(PATH_PREFIX)/MANIFEST : $(SOURCES) $(CLASSES) $(JSFILES)
+	ls $(SOURCES) $(CLASSES) $(JSFILES) \
+		> $(@)
+
+# Emulate .PHONY
+FORCE :

mozilla/js/rhino/examples/Matrix.java

@@ -0,0 +1,274 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1998.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+import org.mozilla.javascript.*;
+import java.util.Vector;
+
+/**
+ * Matrix: An example host object class that implements the Scriptable interface.
+ *
+ * Built-in JavaScript arrays don't handle multiple dimensions gracefully: the
+ * script writer must create every array in an array of arrays. The Matrix class
+ * takes care of that by automatically allocating arrays for every index that
+ * is accessed. What's more, the Matrix constructor takes a integer argument
+ * that specifies the dimension of the Matrix. If m is a Matrix with dimension 3,
+ * then m[0] will be a Matrix with dimension 1, and m[0][0] will be an Array.
+ *
+ * Here's a shell session showing the Matrix object in action:
+ * <pre>
+ * js> defineClass("Matrix")
+ * js> m = new Matrix(2);              <i>A constructor call, see <a href="#Matrix">Matrix</a> below.</i>
+ * [object Matrix]                     <i>The "Matrix" here comes from <a href"#getClassName">getClassName</a>.</i>
+ * js> version(120);                   <i>switch to JavaScript1.2 to see arrays better</i>
+ * 0
+ * js> m[0][0] = 3;
+ * 3
+ * js> m[0];                           <i>an array was created automatically!</i>
+ * [3]
+ * js> m[1];                           <i>array is created even if we don't set a value</i>
+ * []
+ * js> m.dim;                          <i>we can access the "dim" property</i>
+ * 2
+ * js> m.dim = 3;
+ * 3
+ * js> m.dim;                          <i>but not modify it</i>
+ * 2
+ * </pre>
+ *
+ * @see org.mozilla.javascript.Context
+ * @see org.mozilla.javascript.Scriptable
+ *
+ * @author Norris Boyd
+ */
+public class Matrix implements Scriptable {
+
+    /**
+     * The zero-parameter constructor.
+     *
+     * When Context.defineClass is called with this class, it will
+     * construct Matrix.prototype using this constructor.
+     */
+    public Matrix() {
+    }
+
+    /**
+     * The Java constructor, also used to define the JavaScript constructor.
+     */
+    public Matrix(int dimension) {
+        if (dimension <= 0) {
+            throw Context.reportRuntimeError(
+                  "Dimension of Matrix must be greater than zero");
+        }
+        dim = dimension;
+        v = new Vector();
+    }
+
+    /**
+     * Returns the name of this JavaScript class, "Matrix".
+     */
+    public String getClassName() {
+        return "Matrix";
+    }
+
+    /**
+     * Defines the "dim" property by returning true if name is
+     * equal to "dim".
+     * <p>
+     * Defines no other properties, i.e., returns false for
+     * all other names.
+     *
+     * @param name the name of the property
+     * @param start the object where lookup began
+     */
+    public boolean has(String name, Scriptable start) {
+        return name.equals("dim");
+    }
+
+    /**
+     * Defines all numeric properties by returning true.
+     *
+     * @param index the index of the property
+     * @param start the object where lookup began
+     */
+    public boolean has(int index, Scriptable start) {
+        return true;
+    }
+
+    /**
+     * Get the named property.
+     * <p>
+     * Handles the "dim" property and returns NOT_FOUND for all
+     * other names.
+     * @param name the property name
+     * @param start the object where the lookup began
+     */
+    public Object get(String name, Scriptable start) {
+        if (name.equals("dim"))
+            return new Integer(dim);
+
+        return NOT_FOUND;
+    }
+
+    /**
+     * Get the indexed property.
+     * <p>
+     * Look up the element in the associated vector and return
+     * it if it exists. If it doesn't exist, create it.<p>
+     * @param index the index of the integral property
+     * @param start the object where the lookup began
+     */
+    public Object get(int index, Scriptable start) {
+        if (index >= v.size())
+            v.setSize(index+1);
+        Object result = v.elementAt(index);
+        if (result != null)
+            return result;
+        if (dim > 2) {
+            Matrix m = new Matrix(dim-1);
+            m.setParentScope(getParentScope());
+            m.setPrototype(getPrototype());
+            result = m;
+        } else {
+            Context cx = Context.getCurrentContext();
+            Scriptable scope = ScriptableObject.getTopLevelScope(start);
+            result = cx.newArray(scope, 0);
+        }
+        v.setElementAt(result, index);
+        return result;
+    }
+
+    /**
+     * Set a named property.
+     *
+     * We do nothing here, so all properties are effectively read-only.
+     */
+    public void put(String name, Scriptable start, Object value) {
+    }
+
+    /**
+     * Set an indexed property.
+     *
+     * We do nothing here, so all properties are effectively read-only.
+     */
+    public void put(int index, Scriptable start, Object value) {
+    }
+
+    /**
+     * Remove a named property.
+     *
+     * This method shouldn't even be called since we define all properties
+     * as PERMANENT.
+     */
+    public void delete(String id) {
+    }
+
+    /**
+     * Remove an indexed property.
+     *
+     * This method shouldn't even be called since we define all properties
+     * as PERMANENT.
+     */
+    public void delete(int index) {
+    }
+
+    /**
+     * Get prototype.
+     */
+    public Scriptable getPrototype() {
+        return prototype;
+    }
+
+    /**
+     * Set prototype.
+     */
+    public void setPrototype(Scriptable prototype) {
+        this.prototype = prototype;
+    }
+
+    /**
+     * Get parent.
+     */
+    public Scriptable getParentScope() {
+        return parent;
+    }
+
+    /**
+     * Set parent.
+     */
+    public void setParentScope(Scriptable parent) {
+        this.parent = parent;
+    }
+
+    /**
+     * Get properties.
+     *
+     * We return an empty array since we define all properties to be DONTENUM.
+     */
+    public Object[] getIds() {
+        return new Object[0];
+    }
+
+    /**
+     * Default value.
+     *
+     * Use the convenience method from Context that takes care of calling
+     * toString, etc.
+     */
+    public Object getDefaultValue(Class typeHint) {
+        return "[object Matrix]";
+    }
+
+    /**
+     * instanceof operator.
+     *
+     * We mimick the normal JavaScript instanceof semantics, returning
+     * true if <code>this</code> appears in <code>value</code>'s prototype
+     * chain.
+     */
+    public boolean hasInstance(Scriptable value) {
+        Scriptable proto = value.getPrototype();
+        while (proto != null) {
+            if (proto.equals(this)) return true;
+        }
+
+        return false;
+    }
+
+    /**
+     * Some private data for this class.
+     */
+    private int dim;
+    private Vector v;
+    private Scriptable prototype, parent;
+}

mozilla/js/rhino/examples/NervousText.html

@@ -0,0 +1,7 @@
+<html>
+<body>
+This is the NervousText applet in javascript:
+<applet code=NervousText.class width=200 height=50 >
+</applet>
+</body>
+</html>

mozilla/js/rhino/examples/NervousText.js

@@ -0,0 +1,75 @@
+// The Java "NervousText" example ported to JavaScript.
+// Compile using java org.mozilla.tools.jsc.Main -extends java.applet.Applet -implements java.lang.Runnable NervousText.js
+/*  
+Adapted from Java code by
+    Daniel Wyszynski 
+    Center for Applied Large-Scale Computing (CALC) 
+    04-12-95 
+
+    Test of text animation.
+
+    kwalrath: Changed string; added thread suspension. 5-9-95
+*/
+var Font = java.awt.Font;
+var Thread = java.lang.Thread;
+var separated;
+var s = null;
+var killme = null;
+var i;
+var x_coord = 0, y_coord = 0;
+var num;
+var speed=35;
+var counter =0;
+var threadSuspended = false; //added by kwalrath
+
+function init() {
+        resize(150,50); 
+        setFont(new Font("TimesRoman",Font.BOLD,36));
+        s = getParameter("text");
+        if (s == null) {
+            s = "Rhino";
+        }
+        separated = s.split('');
+}
+
+function start() {
+        if(killme == null) 
+        {
+        killme = new java.lang.Thread(java.lang.Runnable(this));
+        killme.start();
+        }
+}
+
+function stop() {
+        killme = null;
+}
+
+function run() {
+        while (killme != null) {
+        try {Thread.sleep(100);} catch (e){}
+        repaint();
+        }
+        killme = null;
+}
+
+function paint(g) {
+        for(i=0;i<separated.length;i++)
+        {
+        x_coord = Math.random()*10+15*i;
+        y_coord = Math.random()*10+36;
+        g.drawChars(separated, i,1,x_coord,y_coord);
+        }
+}
+ 
+/* Added by kwalrath. */
+function mouseDown(evt, x, y) {
+        if (threadSuspended) {
+            killme.resume();
+        }
+        else {
+            killme.suspend();
+        }
+        threadSuspended = !threadSuspended;
+    return true;
+}
+

mozilla/js/rhino/examples/RunScript.java

@@ -0,0 +1,73 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1998.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+import org.mozilla.javascript.*;
+
+/**
+ * RunScript: simplest example of controlling execution of Rhino.
+ * 
+ * Collects its arguments from the command line, executes the 
+ * script, and prints the result.
+ * 
+ * @author Norris Boyd
+ */
+public class RunScript {
+    public static void main(String args[]) 
+        throws JavaScriptException 
+    {
+        // Creates and enters a Context. The Context stores information
+        // about the execution environment of a script.
+        Context cx = Context.enter();
+        
+        // Initialize the standard objects (Object, Function, etc.)
+        // This must be done before scripts can be executed. Returns
+        // a scope object that we use in later calls.
+        Scriptable scope = cx.initStandardObjects(null);
+        
+        // Collect the arguments into a single string.
+        String s = "";
+        for (int i=0; i < args.length; i++)
+            s += args[i];
+        
+        // Now evaluate the string we've colected.
+        Object result = cx.evaluateString(scope, s, "<cmd>", 1, null);
+        
+        // Convert the result to a string and print it.
+        System.err.println(cx.toString(result));
+        
+        // Exit from the context.
+        Context.exit();
+    }
+}
+

mozilla/js/rhino/examples/RunScript2.java

@@ -0,0 +1,63 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1998.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+import org.mozilla.javascript.*;
+
+/**
+ * RunScript2: Like RunScript, but reflects the System.out into JavaScript.
+ * 
+ * @author Norris Boyd
+ */
+public class RunScript2 {
+    public static void main(String args[]) 
+        throws JavaScriptException 
+    {
+        Context cx = Context.enter();
+        Scriptable scope = cx.initStandardObjects(null);
+
+        // Add a global variable "out" that is a JavaScript reflection
+        // of System.out
+        Scriptable jsArgs = Context.toObject(System.out, scope);
+        scope.put("out", scope, jsArgs);
+        
+        String s = "";
+        for (int i=0; i < args.length; i++)
+            s += args[i];
+        Object result = cx.evaluateString(scope, s, "<cmd>", 1, null);
+        System.err.println(cx.toString(result));
+        Context.exit();
+    }
+
+}
+

mozilla/js/rhino/examples/RunScript3.java

@@ -0,0 +1,63 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1998.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+import org.mozilla.javascript.*;
+
+/**
+ * RunScript3: Execute scripts in an environment that includes the
+ *             example Counter class.
+ * 
+ * @author Norris Boyd
+ */
+public class RunScript3 {
+    public static void main(String args[]) 
+        throws Exception 
+    {
+        Context cx = Context.enter();
+        Scriptable scope = cx.initStandardObjects(null);
+
+        // Use the Counter class to define a Counter constructor
+        // and prototype in JavaScript.
+        ScriptableObject.defineClass(scope, Counter.class);
+        
+        String s = "";
+        for (int i=0; i < args.length; i++)
+            s += args[i];
+        Object result = cx.evaluateString(scope, s, "<cmd>", 1, null);
+        System.err.println(cx.toString(result));
+        Context.exit();
+    }
+
+}
+

mozilla/js/rhino/examples/Shell.java

@@ -0,0 +1,352 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1998.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+import org.mozilla.javascript.*;
+import java.io.*;
+
+/**
+ * The shell program.
+ *
+ * Can execute scripts interactively or in batch mode at the command line.
+ * An example of controlling the JavaScript engine.
+ *
+ * @author Norris Boyd
+ */
+public class Shell extends ScriptableObject {
+
+    /**
+     * Main entry point.
+     *
+     * Process arguments as would a normal Java program. Also
+     * create a new Context and associate it with the current thread.
+     * Then set up the execution environment and begin to
+     * execute scripts.
+     */
+    public static void main(String args[]) {
+        // Associate a new Context with this thread
+        Context cx = Context.enter();
+
+        // A bit of shorthand: since Shell extends ScriptableObject,
+        // we can make it the global object.
+        global = new Shell();
+
+        // Initialize the standard objects (Object, Function, etc.)
+        // This must be done before scripts can be executed.
+        cx.initStandardObjects(global);
+
+        // Define some global functions particular to the shell. Note
+        // that these functions are not part of ECMA.
+        String[] names = { "print", "quit", "version", "load", "help" };
+        try {
+            global.defineFunctionProperties(names, Shell.class,
+                                            ScriptableObject.DONTENUM);
+        } catch (PropertyException e) {
+            throw new Error(e.getMessage());
+        }
+
+        args = processOptions(cx, args);
+
+        // Set up "arguments" in the global scope to contain the command
+        // line arguments after the name of the script to execute
+        Object[] array = args;
+        if (args.length > 0) {
+            int length = args.length - 1;
+            array = new Object[length];
+            System.arraycopy(args, 1, array, 0, length);
+        }
+        Scriptable argsObj = cx.newArray(global, array);
+        global.defineProperty("arguments", argsObj,
+                              ScriptableObject.DONTENUM);
+
+        processSource(cx, args.length == 0 ? null : args[0]);
+
+        cx.exit();
+    }
+
+    /**
+     * Parse arguments.
+     */
+    public static String[] processOptions(Context cx, String args[]) {
+        for (int i=0; i < args.length; i++) {
+            String arg = args[i];
+            if (!arg.startsWith("-")) {
+                String[] result = new String[args.length - i];
+                for (int j=i; j < args.length; j++)
+                    result[j-i] = args[j];
+                return result;
+            }
+            if (arg.equals("-version")) {
+                if (++i == args.length)
+                    usage(arg);
+                double d = cx.toNumber(args[i]);
+                if (d != d)
+                    usage(arg);
+                cx.setLanguageVersion((int) d);
+                continue;
+            }
+            usage(arg);
+        }
+        return new String[0];
+    }
+
+    /**
+     * Return name of this class, the global object.
+     *
+     * This method must be implemented in all concrete classes
+     * extending ScriptableObject.
+     *
+     * @see org.mozilla.javascript.Scriptable#getClassName
+     */
+    public String getClassName() {
+        return "global";
+    }
+
+    /**
+     * Print a usage message.
+     */
+    public static void usage(String s) {
+        p("Didn't understand \"" + s + "\".");
+        p("Valid arguments are:");
+        p("-version 100|110|120|130");
+        System.exit(1);
+    }
+
+    /**
+     * Print a help message.
+     *
+     * This method is defined as a JavaScript function.
+     */
+    public static void help(String s) {
+        p("");
+        p("Command                Description");
+        p("=======                ===========");
+        p("help()                 Display usage and help messages. ");
+        p("defineClass(className) Define an extension using the Java class");
+        p("                       named with the string argument. ");
+        p("                       Uses ScriptableObject.defineClass(). ");
+        p("load(['foo.js', ...])  Load JavaScript source files named by ");
+        p("                       string arguments. ");
+        p("loadClass(className)   Load a class named by a string argument.");
+        p("                       The class must be a script compiled to a");
+        p("                       class file. ");
+        p("print([expr ...])      Evaluate and print expressions. ");
+        p("quit()                 Quit the shell. ");
+        p("version([number])      Get or set the JavaScript version number.");
+        p("");
+    }
+
+    /**
+     * Print the string values of its arguments.
+     *
+     * This method is defined as a JavaScript function.
+     * Note that its arguments are of the "varargs" form, which
+     * allows it to handle an arbitrary number of arguments
+     * supplied to the JavaScript function.
+     *
+     */
+    public static void print(Context cx, Scriptable thisObj,
+                             Object[] args, Function funObj)
+    {
+        for (int i=0; i < args.length; i++) {
+            if (i > 0)
+                System.out.print(" ");
+
+            // Convert the arbitrary JavaScript value into a string form.
+            String s = Context.toString(args[i]);
+
+            System.out.print(s);
+        }
+        System.out.println();
+    }
+
+    /**
+     * Quit the shell.
+     *
+     * This only affects the interactive mode.
+     *
+     * This method is defined as a JavaScript function.
+     */
+    public static void quit() {
+        quitting = true;
+    }
+
+    /**
+     * Get and set the language version.
+     *
+     * This method is defined as a JavaScript function.
+     */
+    public static double version(Context cx, Scriptable thisObj,
+                                 Object[] args, Function funObj)
+    {
+        double result = (double) cx.getLanguageVersion();
+        if (args.length > 0) {
+            double d = cx.toNumber(args[0]);
+            cx.setLanguageVersion((int) d);
+        }
+        return result;
+    }
+
+    /**
+     * Load and execute a set of JavaScript source files.
+     *
+     * This method is defined as a JavaScript function.
+     *
+     */
+    public static void load(Context cx, Scriptable thisObj,
+                            Object[] args, Function funObj)
+    {
+        for (int i=0; i < args.length; i++) {
+            processSource(cx, cx.toString(args[i]));
+        }
+    }
+
+
+    /**
+     * Evaluate JavaScript source.
+     *
+     * @param cx the current context
+     * @param filename the name of the file to compile, or null
+     *                 for interactive mode.
+     */
+    public static void processSource(Context cx, String filename) {
+        if (filename == null) {
+            BufferedReader in = new BufferedReader
+                (new InputStreamReader(System.in));
+            String sourceName = "<stdin>";
+            int lineno = 1;
+            boolean hitEOF = false;
+            do {
+                int startline = lineno;
+                System.err.print("js> ");
+                System.err.flush();
+                try {
+                    String source = "";
+                    // Collect lines of source to compile.
+                    while(true) {
+                        String newline;
+                        newline = in.readLine();
+                        if (newline == null) {
+                            hitEOF = true;
+                            break;
+                        }
+                        source = source + newline + "\n";
+                        lineno++;
+                        // Continue collecting as long as more lines
+                        // are needed to complete the current
+                        // statement.  stringIsCompilableUnit is also
+                        // true if the source statement will result in
+                        // any error other than one that might be
+                        // resolved by appending more source.
+                        if (cx.stringIsCompilableUnit(source))
+                            break;
+                    }
+                    Object result = cx.evaluateString(global, source,
+                                                      sourceName, startline,
+                                                      null);
+                    if (result != cx.getUndefinedValue()) {
+                        System.err.println(cx.toString(result));
+                    }
+                }
+                catch (WrappedException we) {
+                    // Some form of exception was caught by JavaScript and
+                    // propagated up.
+                    System.err.println(we.getWrappedException().toString());
+                    we.printStackTrace();
+                }
+                catch (EvaluatorException ee) {
+                    // Some form of JavaScript error.
+                    System.err.println("js: " + ee.getMessage());
+                }
+                catch (JavaScriptException jse) {
+                    // Some form of JavaScript error.
+                    System.err.println("js: " + jse.getMessage());
+                }
+                catch (IOException ioe) {
+                    System.err.println(ioe.toString());
+                }
+                if (quitting) {
+                    // The user executed the quit() function.
+                    break;
+                }
+            } while (!hitEOF);
+            System.err.println();
+        } else {
+            FileReader in = null;
+            try {
+                in = new FileReader(filename);
+            }
+            catch (FileNotFoundException ex) {
+                Context.reportError("Couldn't open file \"" + filename + "\".");
+                return;
+            }
+
+            try {
+                // Here we evalute the entire contents of the file as
+                // a script. Text is printed only if the print() function
+                // is called.
+                cx.evaluateReader(global, in, filename, 1, null);
+            }
+            catch (WrappedException we) {
+                System.err.println(we.getWrappedException().toString());
+                we.printStackTrace();
+            }
+            catch (EvaluatorException ee) {
+                System.err.println("js: " + ee.getMessage());
+            }
+            catch (JavaScriptException jse) {
+                System.err.println("js: " + jse.getMessage());
+            }
+            catch (IOException ioe) {
+                System.err.println(ioe.toString());
+            }
+            finally {
+                try {
+                    in.close();
+                }
+                catch (IOException ioe) {
+                    System.err.println(ioe.toString());
+                }
+            }
+        }
+        System.gc();
+    }
+
+    private static void p(String s) {
+        System.out.println(s);
+    }
+
+    static Shell global;
+    static boolean quitting;
+}
+

mozilla/js/rhino/examples/checkParam.js

@@ -0,0 +1,134 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s):
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+/**
+ * checkParam.js
+ *
+ * The files given as arguments on the command line are assumed to be
+ * Java source code files. This program checks to see that the @param
+ * tags in the documentation comments match with the parameters for 
+ * the associated Java methods.
+ * <p>
+ * Any errors found are reported.
+ *
+ */
+defineClass("File")
+
+// Return true if "str" ends with "suffix".
+function stringEndsWith(str, suffix) {
+	return str.substring(str.length - suffix.length) == suffix;
+}
+
+/**
+ * Perform processing once the end of a documentation comment is seen.
+ *
+ * Look for a parameter list following the end of the comment and 
+ * collect the parameters and compare to the @param entries.
+ * Report any discrepancies.
+ * @param f the current file
+ * @param a an array of parameters from @param comments
+ * @param line the string containing the comment end (in case the 
+ *        parameters are on the same line)
+ */
+function processCommentEnd(f, a, line) {
+	while (line != null && !line.match(/\(/))
+		line = f.readLine();
+	while (line != null && !line.match(/\)/))
+		line += f.readLine();
+	if (line === null)
+		return;
+	var m = line.match(/\(([^\)]+)\)/);
+	var args = m ? m[1].split(",") : [];
+	if (a.length != args.length) {
+		print('"' + f.name + 
+		      '"; line ' + f.lineNumber +
+		      ' mismatch: had a different number' +
+		      ' of @param entries and parameters.');
+	} else {
+		for (var i=0; i < a.length; i++) {
+			if (!stringEndsWith(args[i], a[i])) {
+				print('"' + f.name + 
+				      '"; line ' + f.lineNumber +
+				      ' mismatch: had "' + a[i] +
+				      '" and "' + args[i] + '".');
+				break;
+			}
+		}
+	}
+}
+	
+/**
+ * Process the given file, looking for mismatched @param lists and 
+ * parameter lists.
+ * @param f the file to process
+ */
+function processFile(f) {
+	var line;
+	var m;
+	var i = 0;
+	var a = [];
+      outer:
+	while ((line = f.readLine()) != null) {
+		if (line.match(/@param/)) {
+			while (m = line.match(/@param[ 	]+([^ 	]+)/)) {
+				a[i++] = m[1];
+				line = f.readLine(); 
+				if (line == null)
+					break outer;
+			}
+		} 
+		if (i != 0 && line.match(/\*\//)) {
+			processCommentEnd(f, a, line);
+			i = 0;
+			a = [];
+		}
+	}
+	if (i != 0) {
+		print('"' + f.name + 
+		      '"; line ' + f.lineNumber +
+		      ' missing parameters at end of file.');
+	}
+}
+
+// main script: process each file in arguments list
+
+for (var i=0; i < arguments.length; i++) {
+	var filename = String(arguments[i]);
+	print("Checking " + filename + "...");
+	var f = new File(filename);
+	processFile(f);
+}
+print("done.");
+

mozilla/js/rhino/examples/enum.js

@@ -0,0 +1,70 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s):
+ * Patrick Beard
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+/*
+	enum.js
+	
+	Implementing the interface java.util.Enumeration using the new syntax.
+	Note that this syntax is experimental only, and hasn't been approved
+	by ECMA. 
+	The same functionality can be had without the new syntax using the
+	uglier syntax:
+
+		var elements = new JavaAdapter(java.util.Enumeration, {
+						index: 0, elements: array,
+						hasMoreElements: function ...
+						nextElement: function ...
+		});
+	
+	by Patrick C. Beard.
+ */
+
+// an array to enumerate.
+var array = [0, 1, 2];
+
+// create an array enumeration.
+var elements = new java.util.Enumeration() {
+	index: 0, elements: array,
+	hasMoreElements: function() {
+		return (this.index < this.elements.length);
+	},
+	nextElement: function() {
+		return this.elements[this.index++];
+	}
+};
+
+// now print out the array by enumerating through the Enumeration
+while (elements.hasMoreElements())
+	print(elements.nextElement());

mozilla/js/rhino/examples/jsdoc.js

@@ -0,0 +1,508 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s):
+ * Norris Boyd
+ * Roland Pennings
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+/**
+ * Process a JavaScript source file and process special comments
+ * to produce an HTML file of documentation, similar to javadoc.
+ * @author Norris Boyd
+ * @see rhinotip.jar
+ * @lastmodified xx
+ * @version 1.2 Roland Pennings: Allow multiple files for a function. 
+ * @version 1.3 Roland Pennings: Removes ../.. from the input directory name
+ */
+defineClass("File")
+
+var functionDocArray = [];
+var inputDirName = "";
+var indexFileArray = [];
+var indexFile = "";
+var indexFileName = "index_files";
+var indexFunctionArray = [];
+var indexFunction = "";
+var indexFunctionName = "index_functions";
+var FileList = [];
+var DirList = [];
+var outputdir = null;
+var debug = 0;
+
+
+
+/**
+ * Process JavaScript source file <code>f</code>, writing jsdoc to 
+ * file <code>out</code>.
+ * @param f input file
+ * @param fname name of the input file (without the path)
+ * @param inputdir directory of the input file
+ * @param out output file
+ */
+function processFile(f, fname, inputdir, out) {
+	var s;
+	var firstLine = true;
+	indexFileArray[fname] = "";
+	
+    // write the header of the output file
+	out.writeLine('<HTML><HEADER><TITLE>' + fname + '</TITLE><BODY>');
+	if (inputdir != null) {
+	  outstr = '<a name=\"_top_\"></a><pre><a href=\"' + indexFile + '\">Index Files</a> '; 
+	  outstr += '<a href=\"' + indexFunction + '\">Index Functions</a></pre><hr>';
+      out.writeLine(outstr);
+	}
+
+    // process the input file
+	var comment = "";
+	while ((s = f.readLine()) != null) {
+      var m = s.match(/\/\*\*(.*)/);
+	  if (m != null) {
+		  // Found a comment start.
+		  s = "*" + m[1];
+		  do {
+			m = s.match(/(.*)\*\//);
+			if (m != null) {
+			  // Found end of comment.
+			  comment += m[1];
+			  break;
+			}
+			// Strip leading whitespace and "*".
+			comment += s.replace(/^\s*\*/, "");
+			s = f.readLine();
+		  } while (s != null);	
+
+    	  if (debug)
+          print("Found comment " + comment);
+
+		  if (firstLine) {
+			// We have a comment for the whole file.
+			out.writeLine('<H1>File ' + fname + '</H1>');
+			out.writeLine(processComment(comment,firstLine,fname));
+			out.writeLine('<HR>');
+			firstLine = false;
+			comment = "";
+			continue;
+		  }
+	  }
+	  // match the beginning of the function
+	  // NB we also match functions without a comment!
+	  // if we have two comments one after another only the last one will be taken
+	  m = s.match(/^\s*function\s+((\w+)|(\w+)(\s+))\(([^)]*)\)/);
+	  if (m != null)
+	  {
+        // Found a function start
+		var htmlText = processFunction(m[1], m[2], comment);
+
+		// Save the text in a global variable, so we
+		// can write out a table of contents first.
+		functionDocArray[functionDocArray.length] = 
+				{name:m[1], text:htmlText};
+			
+		// Store the function also in the indexFunctionArray 
+		// so we can have a seperate file with the function table of contents
+		if (indexFunctionArray[m[1]]) {
+ 			//  print("ERROR: function: " + m[1] + " is defined more than once!");
+			// Allow multiple files for a function
+			  with (indexFunctionArray[m[1]]) {
+			    filename = filename + "|" + fname;
+				// print("filename = " + filename);
+			  }
+		} else {
+			  indexFunctionArray[m[1]] = 
+					{filename:fname};
+        }
+		//reset comment 
+		comment = "";
+      }  
+	  firstLine = false;
+	}
+
+	// Write table of contents.
+	for (var i=0; i < functionDocArray.length; i++) {
+		with (functionDocArray[i]) {
+			out.writeLine('function <A HREF=#' + name +
+				      '>' + name + '</A><BR>');
+		}
+	}
+	out.writeLine('<HR>');
+
+	// Now write the saved function documentation.
+	for (i=0; i < functionDocArray.length; i++) {
+		with (functionDocArray[i]) {
+			out.writeLine('<A NAME=' + name + '>');
+			out.writeLine(text);
+		}
+	}
+	out.writeLine('</BODY></HTML>');
+
+	// Now clean up the doc array
+	functionDocArray = [];  
+}
+
+/**
+ * Process function and associated comment.
+ * @param name the name of the function
+ * @param args the args of the function as a single string
+ * @param comment the text of the comment
+ * @return a string for the HTML text of the documentation
+ */
+function processFunction(name, args, comment) {
+   if (debug)
+    print("Processing " + name + " " + args + " " + comment);
+	return "<H2>Function " + name + "</H2>" +
+		"<PRE>" +
+		"function " + name + "(" + args + ")" +
+		"</PRE>" +
+		processComment(comment,0,name) +
+		"<P><BR><BR>";
+}
+
+
+
+
+/**
+ * Process comment.
+ * @param comment the text of the comment
+ * @param firstLine shows if comment is at the beginning of the file
+ * @param fname name of the file (without path)
+ * @return a string for the HTML text of the documentation
+ */
+function processComment(comment,firstLine,fname) {
+	var tags = {};
+	// Use the "lambda" form of regular expression replace,
+	// where the replacement object is a function rather 
+	// than a string. The function is called with the 
+	// matched text and any parenthetical matches as
+	// arguments, and the result of the function used as the
+	// replacement text. 
+	// Here we use the function to build up the "tags" object,
+	// which has a property for each "@" tag that is the name
+	// of the tag, and whose value is an array of the
+	// text following that tag.
+	comment = comment.replace(/@(\w+)\s+([^@]*)/g,
+				  function (s, name, text) {
+					var a = tags[name] || [];
+					a.push(text);
+					tags[name] = a;
+					return "";
+				  });
+				  
+	// if we have a comment at the beginning of a file
+	// store the comment for the index file 			  
+	if (firstLine) {
+	  indexFileArray[fname] = comment;
+	}
+
+	var out = comment + '<P>';
+	if (tags["param"]) {
+		// Create a table of parameters and their descriptions.
+		var array = tags["param"];
+		var params = "";
+		for (var i=0; i < array.length; i++) {
+			var m = array[i].match(/(\w+)\s+(.*)/);
+			params += '<TR><TD><I>'+m[1]+'</I></TD>' + 
+			          '<TD>'+m[2]+'</TD></TR>';
+		}
+		out += '<TABLE WIDTH="90%" BORDER=1>';
+		out += '<TR BGCOLOR=0xdddddddd>';
+		out += '<TD><B>Parameter</B></TD>';
+		out += '<TD><B>Description</B></TD></TR>';
+		out += params;
+		out += '</TABLE><P>';
+	}
+	if (tags["return"]) {
+		out += "<DT><B>Returns:</B><DD>";
+		out += tags["return"][0] + "</DL><P>";
+	}
+	if (tags["author"]) {
+		// List the authors together, separated by commas.
+		out += '<DT><B>Author:</B><DD>';
+		var array = tags["author"];
+		for (var i=0; i < array.length; i++) {
+			out += array[i];
+			if (i+1 < array.length)
+				out += ", ";
+		}
+		out += '</DL><P>';
+	}
+	if (tags["version"]) {
+	    // Show the version.
+	    out += '<DT><B>Version:</B><DD>';
+	    var array = tags["version"];
+	    for (var i=0; i < array.length; i++) {
+		   out += array[i];
+		   if (i+1 < array.length)
+			   out += "<BR><DD>";
+		}
+		out += '</DL><P>';
+	}
+	if (tags["see"]) {
+	    // List the see modules together, separated by <BR>.
+	    out += '<DT><B>Dependencies:</B><DD>';
+	    var array = tags["see"];
+	    for (var i=0; i < array.length; i++) {
+		   out += array[i];
+		   if (i+1 < array.length)
+			   out += "<BR><DD>";
+		}
+		out += '</DL><P>';
+	}
+	if (tags["lastmodified"]) {
+	    // Shows a last modified description with client-side js.
+	    out += '<DT><B>Last modified:</B><DD>';
+		out += '<script><!--\n';
+		out += 'document.writeln(document.lastModified);\n';
+		out += '// ---></script>\n';		
+		out += '</DL><P>';
+	}
+
+	// additional tags can be added here (i.e., "if (tags["see"])...")
+	return out;
+}
+
+/**
+ * Create an html output file
+ * @param outputdir directory to put the file
+ * @param htmlfile name of the file
+*/ 
+function CreateOutputFile(outputdir,htmlfile)
+{ 	 
+  if (outputdir==null)
+  {
+    var outname = htmlfile;
+  }
+  else
+  {
+    var separator = Packages.java.io.File.separator;
+    var outname = outputdir + separator + htmlfile.substring(htmlfile.lastIndexOf(separator),htmlfile.length);
+  }
+  print("output file: " + outname);
+  return new File(outname);
+}
+
+/**
+ * Process a javascript file. Puts the generated HTML file in the outdir  
+ * @param filename name of the javascript file
+ * @inputdir input directory of the file (default null)
+ */
+function processJSFile(filename,inputdir) 
+{
+  if (debug) print("filename = " + filename + " inputdir = " + inputdir);
+
+  if (!filename.match(/\.js$/)) { 
+	print("Expected filename to end in '.js'; had instead " + 
+	  filename + ". I don't treat the file.");
+  } else { 
+    if (inputdir==null)
+	{
+	  var inname = filename;
+    }
+	else
+	{
+      var separator = Packages.java.io.File.separator;
+      var inname = inputdir + separator + filename;
+    }
+    print("Processing file " + inname);
+
+	var f = new File(inname);
+ 	 
+    // create the output file
+    var htmlfile = filename.replace(/\.js$/, ".html");
+
+	var out = CreateOutputFile(outputdir,htmlfile);
+	
+    processFile(f, filename, inputdir, out);
+	out.close();
+  }
+}
+
+/**
+ * Generate index files containing links to the processed javascript files
+ * and the generated functions
+ */
+function GenerateIndex(dirname)
+{
+  // construct the files index file
+  var out = CreateOutputFile(outputdir,indexFile);
+  
+  // write the beginning of the file
+  out.writeLine('<HTML><HEADER><TITLE>File Index - directory: ' + dirname + '</TITLE><BODY>');
+  out.writeLine('<H1>File Index - directory: ' + dirname + '</H1>\n');
+  out.writeLine('<TABLE WIDTH="90%" BORDER=1>');
+  out.writeLine('<TR BGCOLOR=0xdddddddd>');
+  out.writeLine('<TD><B>File</B></TD>');
+  out.writeLine('<TD><B>Description</B></TD></TR>');
+
+  var separator = Packages.java.io.File.separator;
+
+  // sort the index file array
+  var SortedFileArray = [];
+  for (var fname in indexFileArray)
+    SortedFileArray.push(fname);  
+  SortedFileArray.sort();
+
+  for (var i=0; i < SortedFileArray.length; i++) {
+    var fname = SortedFileArray[i];
+  	var htmlfile = fname.replace(/\.js$/, ".html");
+    out.writeLine('<TR><TD><A HREF=\"' + htmlfile + '\">' + fname + '</A></TD></TD><TD>');
+	if (indexFileArray[fname])
+	  out.writeLine(indexFileArray[fname]);
+	else
+	  out.writeLine('No comments');
+	out.writeLine('</TD></TR>\n');
+  }
+  out.writeLine('</TABLE></BODY></HTML>');
+  out.close();
+  
+  // construct the functions index file
+  var out = CreateOutputFile(outputdir,indexFunction);
+    
+  // write the beginning of the file
+  out.writeLine('<HTML><HEADER><TITLE>Function Index - directory: ' + dirname + '</TITLE><BODY>');
+  out.writeLine('<H1>Function Index - directory: ' + dirname + '</H1>\n');
+  out.writeLine('<TABLE WIDTH="90%" BORDER=1>');
+  out.writeLine('<TR BGCOLOR=0xdddddddd>');
+  out.writeLine('<TD><B>Function</B></TD>');
+  out.writeLine('<TD><B>Files</B></TD></TR>');
+  
+  // sort the function array
+  var SortedFunctionArray = [];
+  for (var functionname in indexFunctionArray)
+    SortedFunctionArray.push(functionname);  
+  SortedFunctionArray.sort();
+
+  for (var j=0; j < SortedFunctionArray.length; j++) {
+    var funcname = SortedFunctionArray[j];
+    with (indexFunctionArray[funcname]) {
+	 var outstr = '<TR><TD>' + funcname + '</TD><TD>';
+	 var filelst = filename.split("|");
+	 for (var i in filelst) {
+	   var htmlfile = filelst[i].replace(/\.js$/, ".html");
+	   outstr += '<A HREF=\"' + htmlfile + '#' + funcname + '\">' + filelst[i] + '</A>&nbsp;';
+	 }
+	 outstr += '</TD></TR>';
+	 out.writeLine(outstr);
+    }
+  }
+  out.writeLine('</TABLE></BODY></HTML>');
+  out.close();
+}
+
+
+/**
+ * prints the options for JSDoc
+*/
+function PrintOptions()
+{
+  print("You can use the following options:\n");
+  print("-d: specify an output directory for the generated html files\n");
+  print("-i: processes all files in an input directory (you can specify several directories)\n");
+  quit();
+}
+
+
+// Main Script
+// first read the arguments 
+if (! arguments)
+  PrintOptions();
+  
+for (var i=0; i < arguments.length; i++) {
+  if (debug) print("argument: + \'" + arguments[i] + "\'");
+  if (arguments[i].match(/^\-/)) {
+   if (String(arguments[i])=="-d"){
+    // output directory for the generated html files
+
+    outputdir = String(arguments[i+1]);
+	if (debug) print("outputdir: + \'" + outputdir + "\'");
+
+    i++;  
+   }
+   else if (String(arguments[i])=="-i"){
+    // process all files in an input directory
+
+    DirList.push(String(arguments[i+1]));
+if (debug) print("inputdir: + \'" + arguments[i+1] + "\'");
+     i++;
+   }
+   else {
+    print("Unknown option: " + arguments[i] + "\n");
+	PrintOptions();
+   }
+  }
+  else
+  {
+    // we have a single file
+	if (debug) print("file: + \'" + arguments[i] + "\'");
+
+	FileList.push(String(arguments[i]));
+  }
+}  
+	
+// first handle the single files
+for (var i in FileList) 
+  processJSFile(FileList[i],null);
+
+// then handle the input directories
+for (var j in DirList) {
+  var inputdir = String(DirList[j]);
+  
+  print("Process input directory: " + inputdir);
+
+  // clean up index arrays
+  var indexFileArray = [];
+  var indexFunctionArray = [];
+
+  // for the directory name get rid of ../../ or ..\..\
+  inputDirName = inputdir.replace(/\.\.\/|\.\.\\/g,"");
+  
+  indexFile = indexFileName + "_" + inputDirName + ".html";
+  indexFunction = indexFunctionName + "_" + inputDirName + ".html";
+  
+print("indexFile = " + indexFile);
+print("indexFunction = " + indexFunction);
+	
+  // read the files in the directory
+  var DirFile = new java.io.File(inputdir);
+  var lst = DirFile.list();
+  var separator = Packages.java.io.File.separator;
+
+  for (var i=0; i < lst.length; i++)
+  {
+    processJSFile(String(lst[i]),inputdir);
+  }  
+
+  // generate the index files for the input directory
+  GenerateIndex(inputDirName);
+}
+
+
+

mozilla/js/rhino/examples/liveConnect.js

@@ -0,0 +1,54 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s):
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+/**
+ * liveConnect.js: a simple demonstration of JavaScript-to-Java connectivity
+ */
+
+// Create a new StringBuffer. Note that the class name must be fully qualified
+// by its package. Packages other than "java" must start with "Packages", i.e., 
+// "Packages.javax.servlet...".
+var sb = new java.lang.StringBuffer();
+
+// Now add some stuff to the buffer.
+sb.append("hi, mom");
+sb.append(3);	// this will add "3.0" to the buffer since all JS numbers
+		// are doubles by default
+sb.append(true);
+
+// Now print it out. (The toString() method of sb is automatically called
+// to convert the buffer to a string.)
+// Should print "hi, mom3.0true".
+print(sb);	

mozilla/js/rhino/examples/unique.js

@@ -0,0 +1,53 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s):
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+// unique.js: read the contents of a file and print out the unique lines
+
+defineClass("File")
+
+// "arguments[0]" refers to the first argument at the command line to the 
+// script, if present. If not present, "arguments[0]" will be undefined,
+// which will cause f to read from System.in.
+var f = new File(arguments[0]);
+var o = {}
+var line;
+while ((line = f.readLine()) != null) {
+	// Use JavaScript objects' inherent nature as an associative
+	// array to provide uniqueness
+	o[line] = true;
+}
+for (i in o) {
+	print(i);
+} 

mozilla/js/rhino/manifest

@@ -0,0 +1,2 @@
+Manifest-Version: 1.0
+Main-Class: org.mozilla.javascript.tools.shell.Main

mozilla/js/rhino/org/mozilla/javascript/Arguments.java

@@ -0,0 +1,130 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+/**
+ * This class implements the "arguments" object.
+ *
+ * See ECMA 10.1.8
+ *
+ * @see org.mozilla.javascript.NativeCall
+ * @author Norris Boyd
+ */
+class Arguments extends ScriptableObject {
+
+    public Arguments(NativeCall activation) {
+        this.activation = activation;
+
+        Scriptable parent = activation.getParentScope();
+        setParentScope(parent);
+        setPrototype(ScriptableObject.getObjectPrototype(parent));
+
+        args = activation.getOriginalArguments();
+        int length = args.length;
+        Object callee = activation.funObj;
+
+        defineProperty("length", new Integer(length),
+                       ScriptableObject.DONTENUM);
+        defineProperty("callee", callee, ScriptableObject.DONTENUM);
+
+        hasCaller = (activation.funObj.version <= Context.VERSION_1_3 &&
+                     activation.funObj.version != Context.VERSION_DEFAULT);
+    }
+
+    public String getClassName() {
+        return "Arguments";
+    }
+
+    public boolean has(String name, Scriptable start) {
+        return (hasCaller && name.equals("caller")) || super.has(name, start);
+    }
+
+    public boolean has(int index, Scriptable start) {
+        Object[] args = activation.getOriginalArguments();
+        return (0 <= index && index < args.length) || super.has(index, start);
+    }
+
+    public Object get(String name, Scriptable start) {
+        if (hasCaller && name.equals("caller")) {
+            NativeCall caller = activation.caller;
+            if (caller == null || caller.originalArgs == null)
+                return null;
+            return caller.get("arguments", caller);
+        }
+        return super.get(name, start);
+    }
+
+    public Object get(int index, Scriptable start) {
+        if (0 <= index && index < args.length) {
+            NativeFunction f = activation.funObj;
+            if (index < f.argCount)
+                return activation.get(f.names[index+1], activation);
+            return args[index];
+        }
+        return super.get(index, start);
+    }
+
+    public void put(String name, Scriptable start, Object value) {
+        if (name.equals("caller")) {
+            // Set "hasCaller" to false so that we won't look up a  
+            // computed value.
+            hasCaller = false;
+        }
+        super.put(name, start, value);
+    }
+
+    public void put(int index, Scriptable start, Object value) {
+        if (0 <= index && index < args.length) {
+            NativeFunction f = activation.funObj;
+            if (index < f.argCount)
+                activation.put(f.names[index+1], activation, value);
+            else
+                args[index] = value;
+            return;
+        }
+        super.put(index, start, value);
+    }
+
+    public void delete(String name) {
+        if (name.equals("caller"))
+            hasCaller = false;
+        super.delete(name);
+    }
+
+    private NativeCall activation;
+    private Object[] args;
+    private boolean hasCaller;
+}

mozilla/js/rhino/org/mozilla/javascript/BinaryDigitReader.java

@@ -0,0 +1,75 @@
+
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Waldemar Horwat
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+package org.mozilla.javascript;
+
+final class BinaryDigitReader {
+    int lgBase;			// Logarithm of base of number
+    int digit;			// Current digit value in radix given by base
+    int digitPos;		// Bit position of last bit extracted from digit
+    String digits;		// String containing the digits
+    int start;			// Index of the first remaining digit
+    int end;			// Index past the last remaining digit
+
+    BinaryDigitReader(int base, String digits, int start, int end) {
+        lgBase = 0;
+        while (base != 1) {
+            lgBase++;
+            base >>= 1;
+        }
+        digitPos = 0;
+        this.digits = digits;
+        this.start = start;
+        this.end = end;
+    }
+
+    /* Return the next binary digit from the number or -1 if done */
+    int getNextBinaryDigit()
+    {
+        if (digitPos == 0) {
+            if (start == end)
+                return -1;
+    
+            char c = digits.charAt(start++);
+            if ('0' <= c && c <= '9')
+                digit = c - '0';
+            else if ('a' <= c && c <= 'z')
+                digit = c - 'a' + 10;
+            else digit = c - 'A' + 10;
+            digitPos = lgBase;
+        }
+        return digit >> --digitPos & 1;
+    }
+}

mozilla/js/rhino/org/mozilla/javascript/ClassDefinitionException.java

@@ -0,0 +1,48 @@
+
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+// API class
+
+package org.mozilla.javascript;
+
+/**
+ * Thrown if errors are detected while attempting to define a host object
+ * from a Java class.
+ */
+public class ClassDefinitionException extends Exception {
+
+    public ClassDefinitionException(String detail) {
+        super(detail);
+    }
+}

mozilla/js/rhino/org/mozilla/javascript/ClassNameHelper.java

@@ -0,0 +1,61 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s):
+ * Norris Boyd
+ * Roger Lawrence
+ * Andi Vajda
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+public interface ClassNameHelper {
+
+    public String getTargetClassFileName();
+
+    public void setTargetClassFileName(String classFileName);
+
+    public String getTargetPackage();
+
+    public void setTargetPackage(String targetPackage);
+
+    public String getTargetClassFileName(String className);
+    
+    public String getGeneratingDirectory();
+    
+    public void setTargetExtends(Class extendsClass);
+    
+    public void setTargetImplements(Class[] implementsClasses);
+
+    public ClassOutput getClassOutput();
+
+    public void setClassOutput(ClassOutput classOutput);
+}

mozilla/js/rhino/org/mozilla/javascript/ClassOutput.java

@@ -0,0 +1,56 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-2000 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Andi Vajda
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+package org.mozilla.javascript;
+
+// API class
+
+import java.io.*;
+
+/**
+ * This interface is implemented by classes interested in the bytecode
+ * generated by the rhino compiler for script objects.
+ *
+ * @see Context
+ * @author Andi Vajda
+ */
+public interface ClassOutput {
+  
+    /**
+     * @param className the name of the class for which bytecode is ready.
+     * @return a stream into which to write bytecode.
+     * @since 1.5 Release 2
+     */
+    public OutputStream getOutputStream(String className)
+        throws IOException;

mozilla/js/rhino/org/mozilla/javascript/DefaultErrorReporter.java

@@ -0,0 +1,63 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+/**
+ * This is the default error reporter for JavaScript.
+ *
+ * @author Norris Boyd
+ */
+class DefaultErrorReporter implements ErrorReporter {
+
+    public void warning(String message, String sourceName, int line,
+                        String lineSource, int lineOffset)
+    {
+        // do nothing
+    }
+
+    public void error(String message, String sourceName, int line,
+                      String lineSource, int lineOffset)
+    {
+        throw new EvaluatorException(message);
+    }
+
+    public EvaluatorException runtimeError(String message, String sourceName,
+                                           int line, String lineSource, 
+                                           int lineOffset)
+    {
+        return new EvaluatorException(message);
+    }
+}

mozilla/js/rhino/org/mozilla/javascript/EcmaError.java

@@ -0,0 +1,152 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Roger Lawrence
+ * 
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+// API class
+
+package org.mozilla.javascript;
+
+/**
+ * The class of exceptions raised by the engine as described in 
+ * ECMA edition 3. See section 15.11.6 in particular.
+ */
+public class EcmaError extends RuntimeException {
+
+    /**
+     * Create an exception with the specified detail message.
+     *
+     * Errors internal to the JavaScript engine will simply throw a
+     * RuntimeException.
+     *
+     * @param nativeError the NativeError object constructed for this error
+     * @param sourceName the name of the source reponsible for the error
+     * @param lineNumber the line number of the source
+     * @param columnNumber the columnNumber of the source (may be zero if
+     *                     unknown)
+     * @param lineSource the source of the line containing the error (may be 
+     *                   null if unknown)
+     */
+    public EcmaError(NativeError nativeError, String sourceName, 
+                     int lineNumber, int columnNumber, String lineSource) 
+    {
+        super("EcmaError");
+        errorObject = nativeError;
+        this.sourceName = sourceName;
+        this.lineNumber = lineNumber;
+        this.columnNumber = columnNumber;
+        this.lineSource = lineSource;
+    }
+    
+    /**
+     * Return a string representation of the error, which currently consists 
+     * of the name of the error together with the message.
+     */
+    public String toString() {
+        if (sourceName != null && lineNumber > 0)
+            return errorObject.toString() + " (" + sourceName + 
+               "; line " + lineNumber + ")";
+        else
+            return errorObject.toString();
+    }
+    
+    /**
+     * Gets the name of the error.
+     * 
+     * ECMA edition 3 defines the following
+     * errors: EvalError, RangeError, ReferenceError, 
+     * SyntaxError, TypeError, and URIError. Additional error names
+     * may be added in the future.
+     * 
+     * See ECMA edition 3, 15.11.7.9.
+     * 
+     * @return the name of the error. 
+     */
+    public String getName() {
+        return errorObject.getName();
+    }
+    
+    /**
+     * Gets the message corresponding to the error.
+     * 
+     * See ECMA edition 3, 15.11.7.10.
+     * 
+     * @return an implemenation-defined string describing the error.
+     */
+    public String getMessage() {
+        return errorObject.getMessage();
+    }
+    
+    /**
+     * Get the name of the source containing the error, or null
+     * if that information is not available.
+     */
+    public String getSourceName() {
+        return sourceName;
+    }
+    
+    /**
+     * Returns the line number of the statement causing the error,
+     * or zero if not available.
+     */
+    public int getLineNumber() {
+        return lineNumber;
+    }
+    
+    /**
+     * Get the error object corresponding to this exception.
+     */
+    public Scriptable getErrorObject() {
+        return errorObject;
+    }
+    
+    /**
+     * The column number of the location of the error, or zero if unknown.
+     */
+    public int getColumnNumber() {
+        return columnNumber;
+    }
+    
+    /**
+     * The source of the line causing the error, or zero if unknown.
+     */
+    public String getLineSource() {
+        return lineSource;
+    }
+    
+    private NativeError errorObject;
+    private String sourceName;
+    private int lineNumber;
+    private int columnNumber;
+    private String lineSource;
+}

mozilla/js/rhino/org/mozilla/javascript/ErrorReporter.java

@@ -0,0 +1,103 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+// API class
+
+package org.mozilla.javascript;
+
+/**
+ * This is interface defines a protocol for the reporting of
+ * errors during JavaScript translation or execution.
+ *
+ * @author Norris Boyd
+ */
+
+public interface ErrorReporter {
+
+    /**
+     * Report a warning.
+     *
+     * The implementing class may choose to ignore the warning
+     * if it desires.
+     *
+     * @param message a String describing the warning
+     * @param sourceName a String describing the JavaScript source
+     * where the warning occured; typically a filename or URL
+     * @param line the line number associated with the warning
+     * @param lineSource the text of the line (may be null)
+     * @param lineOffset the offset into lineSource where problem was detected
+     */
+    void warning(String message, String sourceName, int line,
+                 String lineSource, int lineOffset);
+
+    /**
+     * Report an error.
+     *
+     * The implementing class is free to throw an exception if
+     * it desires.
+     *
+     * If execution has not yet begun, the JavaScript engine is
+     * free to find additional errors rather than terminating
+     * the translation. It will not execute a script that had
+     * errors, however.
+     *
+     * @param message a String describing the error
+     * @param sourceName a String describing the JavaScript source
+     * where the error occured; typically a filename or URL
+     * @param line the line number associated with the error
+     * @param lineSource the text of the line (may be null)
+     * @param lineOffset the offset into lineSource where problem was detected
+     */
+    void error(String message, String sourceName, int line,
+               String lineSource, int lineOffset);
+
+    /**
+     * Creates an EvaluatorException that may be thrown.
+     *
+     * runtimeErrors, unlike errors, will always terminate the
+     * current script.
+     *
+     * @param message a String describing the error
+     * @param sourceName a String describing the JavaScript source
+     * where the error occured; typically a filename or URL
+     * @param line the line number associated with the error
+     * @param lineSource the text of the line (may be null)
+     * @param lineOffset the offset into lineSource where problem was detected
+     * @return an EvaluatorException that will be thrown.
+     */
+    EvaluatorException runtimeError(String message, String sourceName, 
+                                    int line, String lineSource, 
+                                    int lineOffset);
+}

mozilla/js/rhino/org/mozilla/javascript/EvaluatorException.java

@@ -0,0 +1,56 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+
+package org.mozilla.javascript;
+
+/**
+ * The class of exceptions thrown by the JavaScript engine.
+ */
+public class EvaluatorException extends RuntimeException {
+
+    /**
+     * Create an exception with the specified detail message.
+     *
+     * Errors internal to the JavaScript engine will simply throw a
+     * RuntimeException.
+     *
+     * @param detail a message with detail about the exception
+     */
+    public EvaluatorException(String detail) {
+        super(detail);
+    }
+
+}

mozilla/js/rhino/org/mozilla/javascript/FlattenedObject.java

@@ -0,0 +1,342 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ * Roger Lawrence
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+import java.util.Hashtable;
+import java.util.Enumeration;
+
+/**
+ * Manipulate a Scriptable object as if its prototype chain were flattened.
+ * <p>
+ * This class has been deprecated in favor of the static methods 
+ * <code>getProperty</code>, <code>putProperty</code>, and 
+ * <code>deleteProperty</code>. Those methods provide the
+ * same functionality without the confusing and inefficient need to construct
+ * a new object instance.
+ *
+ * @see org.mozilla.javascript.ScriptableObject
+ *
+ * @author Norris Boyd
+ */
+
+public class FlattenedObject {
+
+    /**
+     * Construct a new FlattenedObject.
+     *
+     * @param object the object to be viewed with flattened properties
+     * @deprecated
+     */
+    public FlattenedObject(Scriptable object) {
+        this.obj = object;
+    }
+
+    /**
+     * Get the associated Scriptable object.
+     * @deprecated
+     */
+    public Scriptable getObject() {
+        return obj;
+    }
+
+    /**
+     * Determine if a property exists in an object.
+     *
+     * This is a more convenient (and less efficient) form than
+     * <code>Scriptable.has()</code>.
+     * It returns true if and only if the property
+     * exists in this object or any of the objects in its prototype
+     * chain.
+     *
+     * @param id the property index, which may be either a String or a
+     *           Number
+     * @return true if and only if the property exists in the prototype
+     *         chain
+     * @see org.mozilla.javascript.Scriptable#has
+     * @deprecated As of 1.5R2, replaced by ScriptableObject.getProperty
+     */
+    public boolean hasProperty(Object id) {
+        String stringId = ScriptRuntime.toString(id);
+        String s = ScriptRuntime.getStringId(stringId);
+        if (s == null)
+            return getBase(obj, ScriptRuntime.getIntId(stringId)) != null;
+        return getBase(obj, s) != null;
+    }
+
+    /**
+     * Get a property of an object.
+     * <p>
+     * This is a more convenient (and less efficient) form than
+     * <code>Scriptable.get()</code>. It corresponds exactly to the
+     * expression <code>obj[id]</code> in JavaScript. This method
+     * will traverse the prototype chain of an object to find the
+     * property.<p>
+     *
+     * If the property does not exist in the object or its prototype
+     * chain, the undefined value will be returned.
+     *
+     * @param id the property index; can be a String or a Number; the
+     *           String may contain characters representing a number
+     * @return the value of the property or the undefined value
+     * @see org.mozilla.javascript.Scriptable#get
+     * @see org.mozilla.javascript.Context#getUndefinedValue
+     * @deprecated As of 1.5R2, replaced by ScriptableObject.getProperty
+     */
+    public Object getProperty(Object id) {
+        String s = ScriptRuntime.getStringId(id);
+        int index = s == null ? ScriptRuntime.getIntId(id) : 0;
+        Scriptable m = obj;
+        Object result;
+        for(;;) {
+            result = s == null ? m.get(index, obj) : m.get(s, obj);
+            if (result != Scriptable.NOT_FOUND)
+                break;
+            m = m.getPrototype();
+            if (m == null)
+                return Undefined.instance;
+        }
+        if (result instanceof Scriptable)
+            return new FlattenedObject((Scriptable) result);
+        return result;
+    }
+
+    /**
+     * Set a property of an object.
+     *
+     * This is a more convenient (and less efficient) form than that
+     * provided in Scriptable. It corresponds exactly to the
+     * expression <code>obj[id] = val</code> in JavaScript.<p>
+     *
+     * @param id the property index, which may be either a String or
+     *           a Number
+     * @param value the value of the property
+     * @see org.mozilla.javascript.Scriptable#put
+     * @deprecated As of 1.5R2, replaced by ScriptableObject.putProperty
+     */
+    public void putProperty(Object id, Object value) {
+        String s = ScriptRuntime.getStringId(id);
+        if (value instanceof FlattenedObject)
+            value = ((FlattenedObject) value).getObject();
+        Scriptable x;
+        if (s == null) {
+            int index = ScriptRuntime.getIntId(id);
+            x = getBase(obj, index);
+            if (x == null)
+                x = obj;
+            x.put(index, obj, value);
+            return;
+        }
+        x = getBase(obj, s);
+        if (x == null)
+            x = obj;
+        x.put(s, obj, value);
+    }
+
+    /**
+     * Remove a property.
+     *
+     * This method provides the functionality of the <code>delete</code>
+     * operator in JavaScript.
+     *
+     * @param id the property index, which may be either a String or
+     *           a Number
+     * @return true if the property didn't exist, or existed and was removed
+     * @see org.mozilla.javascript.Scriptable#delete
+     * @deprecated as of 1.5R2, replaced by ScriptableObject.deleteProperty
+     */
+    public boolean deleteProperty(Object id) {
+        String s = ScriptRuntime.getStringId(id);
+        if (s == null) {
+            int index = ScriptRuntime.getIntId(id);
+            Scriptable base = getBase(obj, index);
+            if (base == null)
+                return true;
+            base.delete(index);
+            return !base.has(index, base);
+        }
+        Scriptable base = getBase(obj, s);
+        if (base == null)
+            return true;
+        base.delete(s);
+        return !base.has(s, base);
+    }
+
+    /**
+     * Return an array that contains the ids of the properties.
+     *
+     * <p>This method will walk the prototype chain and collect the
+     * ids of all objects in the prototype chain.<p>
+     *
+     * If an id appears in more than one object in the prototype chain,
+     * it will only be in the array once. (So all the entries in the
+     * array will be unique respective to equals().)
+     *
+     * @see org.mozilla.javascript.Scriptable#getIds
+     * @deprecated
+     */
+    public Object[] getIds() {
+        Hashtable h = new Hashtable(11);
+        Scriptable m = obj;
+        while (m != null) {
+            Object[] e = m.getIds();
+            for (int i=0; i < e.length; i++) {
+                h.put(e[i], Boolean.TRUE);
+            }
+            m = m.getPrototype();
+        }
+        Enumeration keys = h.keys();
+        Object elem;
+        Object[] result = new Object[h.size()];
+        int index = 0;
+        while (keys.hasMoreElements()) {
+            elem = keys.nextElement();
+            result[index++] = elem;
+        }
+        return result;
+    }
+
+    /**
+     * Consider this object to be a function, and call it.
+     *
+     * @param cx the current Context for this thread
+     * @param thisObj the JavaScript 'this' for the call
+     * @param args the arguments for the call
+     * @return the result of the JavaScript function call
+     * @exception NotAFunctionException if this object is not a function
+     * @exception JavaScriptException if an uncaught JavaScript exception
+     *            occurred while executing the function
+     * @see org.mozilla.javascript.Function#call
+     * @deprecated
+     */
+    public Object call(Context cx, Scriptable thisObj, Object[] args)
+        throws NotAFunctionException,
+               JavaScriptException
+    {
+        if (!(obj instanceof Function)) {
+            throw new NotAFunctionException();
+        }
+        return ScriptRuntime.call(cx, obj, thisObj, args, (Function) obj);
+    }
+
+    /**
+     * Consider this object to be a function, and invoke it as a
+     * constructor call.
+     *
+     * @param cx the current Context for this thread
+     * @param args the arguments for the constructor call
+     * @return the allocated object
+     * @exception NotAFunctionException if this object is not a function
+     * @exception JavaScriptException if an uncaught JavaScript exception
+     *            occurred while executing the constructor
+     * @see org.mozilla.javascript.Function#construct
+     * @deprecated
+     */
+    public Scriptable construct(Context cx, Object[] args)
+        throws NotAFunctionException,
+               JavaScriptException
+    {
+        if (!(obj instanceof Function)) {
+            throw new NotAFunctionException();
+        }
+        return ScriptRuntime.newObject(cx, obj, args, null);
+    }
+
+    /**
+     * Get the property indicated by the id, and invoke it with the
+     * specified arguments.
+     * <p>
+     * For example, for a FlattenedObject <code>obj</code>,
+     * and a Java array <code>a</code> consisting of a single string
+     * <code>"hi"</code>, the call <pre>
+     * obj.callMethod("m", a)</pre>
+     * is equivalent to the JavaScript code <code>obj.m("hi")</code>.<p>
+     *
+     * If the property is not found or is not a function, an
+     * exception will be thrown.
+     *
+     * @param id the Number or String to use to find the function property
+     *           to call
+     * @param args the arguments for the constructor call
+     * @return the result of the call
+     * @exception PropertyException if the designated property
+     *            was not found
+     * @exception NotAFunctionException if this object is not a function
+     * @exception JavaScriptException if an uncaught JavaScript exception
+     *            occurred while executing the method
+     * @see org.mozilla.javascript.Function#call
+     * @deprecated
+     */
+    public Object callMethod(Object id, Object[] args)
+        throws PropertyException,
+               NotAFunctionException,
+               JavaScriptException
+    {
+        if (!hasProperty(id)) {
+            throw new PropertyException(
+                Context.getMessage("msg.prop.not.found", null));
+        }
+        Object o = getProperty(id);
+        if (o instanceof FlattenedObject)
+            return ((FlattenedObject) o).call(Context.getContext(), obj, args);
+        throw new NotAFunctionException();
+    }
+
+    /****** End of API *******/
+
+    private static Scriptable getBase(Scriptable obj, String s) {
+        Scriptable m = obj;
+        while (m != null) {
+            if (m.has(s, obj))
+                return m;
+            m = m.getPrototype();
+        }
+        return null;
+    }
+
+    private static Scriptable getBase(Scriptable obj, int index) {
+        Scriptable m = obj;
+        while (m != null) {
+            if (m.has(index, obj))
+                return m;
+            m = m.getPrototype();
+        }
+        return null;
+    }
+
+    private Scriptable obj;
+}
+

mozilla/js/rhino/org/mozilla/javascript/Function.java

@@ -0,0 +1,86 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+// API class
+
+package org.mozilla.javascript;
+
+/**
+ * This is interface that all functions in JavaScript must implement.
+ * The interface provides for calling functions and constructors.
+ *
+ * @see org.mozilla.javascript.Scriptable
+ * @author Norris Boyd
+ */
+
+public interface Function extends Scriptable {
+    /**
+     * Call the function.
+     *
+     * Note that the array of arguments is not guaranteed to have
+     * length greater than 0.
+     *
+     * @param cx the current Context for this thread
+     * @param scope the scope to execute the function relative to. This is
+     *              set to the value returned by getParentScope() except
+     *              when the function is called from a closure.
+     * @param thisObj the JavaScript <code>this</code> object
+     * @param args the array of arguments
+     * @return the result of the call
+     * @exception JavaScriptException if an uncaught exception
+     *            occurred while executing the function
+     */
+    public Object call(Context cx, Scriptable scope, Scriptable thisObj,
+                       Object[] args)
+        throws JavaScriptException;
+
+    /**
+     * Call the function as a constructor.
+     *
+     * This method is invoked by the runtime in order to satisfy a use
+     * of the JavaScript <code>new</code> operator.  This method is
+     * expected to create a new object and return it.
+     *
+     * @param cx the current Context for this thread
+     * @param scope an enclosing scope of the caller except
+     *              when the function is called from a closure.
+     * @param args the array of arguments
+     * @return the allocated object
+     * @exception JavaScriptException if an uncaught exception
+     *            occurred while executing the constructor
+     */
+    public Scriptable construct(Context cx, Scriptable scope, Object[] args)
+        throws JavaScriptException;
+}

mozilla/js/rhino/org/mozilla/javascript/FunctionNode.java

@@ -0,0 +1,94 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ * Roger Lawrence
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+import java.util.*;
+
+public class FunctionNode extends Node {
+
+    public FunctionNode(String name, Node left, Node right) {
+        super(TokenStream.FUNCTION, left, right, name);
+        itsVariableTable = new VariableTable();
+    }
+
+    public String getFunctionName() {
+        return getString();
+    }
+
+    public VariableTable getVariableTable() {
+        return itsVariableTable;
+    }
+
+    public boolean requiresActivation() {
+        return itsNeedsActivation;
+    }
+
+    public boolean setRequiresActivation(boolean b) {
+        return itsNeedsActivation = b;
+    }
+    
+    /**
+     * There are three types of functions that can be defined. The first
+     * is a function statement. This is a function appearing as a top-level
+     * statement (i.e., not nested inside some other statement) in either a
+     * script or a function.
+     * 
+     * The second is a function expression, which is a function appearing in
+     * an expression except for the third type, which is...
+     * 
+     * The third type is a function expression where the expression is the 
+     * top-level expression in an expression statement.
+     * 
+     * The three types of functions have different treatment and must be 
+     * distinquished.
+     */
+    public static final byte FUNCTION_STATEMENT            = 1;
+    public static final byte FUNCTION_EXPRESSION           = 2;
+    public static final byte FUNCTION_EXPRESSION_STATEMENT = 3;
+    
+    public byte getFunctionType() {
+        return itsFunctionType;
+    }
+
+    public void setFunctionType(byte functionType) {
+        itsFunctionType = functionType;
+    }
+
+    protected VariableTable itsVariableTable;
+    protected boolean itsNeedsActivation;
+    protected byte itsFunctionType;
+}

mozilla/js/rhino/org/mozilla/javascript/FunctionObject.java

@@ -0,0 +1,636 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-2000 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ * Ted Neward
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+// API class
+
+package org.mozilla.javascript;
+
+import java.util.Hashtable;
+import java.util.Vector;
+import java.lang.reflect.*;
+
+public class FunctionObject extends NativeFunction {
+
+    /**
+     * Create a JavaScript function object from a Java method.
+     *
+     * <p>The <code>member</code> argument must be either a java.lang.reflect.Method
+     * or a java.lang.reflect.Constructor and must match one of two forms.<p>
+     *
+     * The first form is a member with zero or more parameters
+     * of the following types: Object, String, boolean, Scriptable,
+     * byte, short, int, float, or double. The Long type is not supported
+     * because the double representation of a long (which is the 
+     * EMCA-mandated storage type for Numbers) may lose precision.
+     * If the member is a Method, the return value must be void or one 
+     * of the types allowed for parameters.<p>
+     *
+     * The runtime will perform appropriate conversions based
+     * upon the type of the parameter. A parameter type of
+     * Object specifies that no conversions are to be done. A parameter
+     * of type String will use Context.toString to convert arguments.
+     * Similarly, parameters of type double, boolean, and Scriptable
+     * will cause Context.toNumber, Context.toBoolean, and
+     * Context.toObject, respectively, to be called.<p>
+     *
+     * If the method is not static, the Java 'this' value will
+     * correspond to the JavaScript 'this' value. Any attempt
+     * to call the function with a 'this' value that is not
+     * of the right Java type will result in an error.<p>
+     *
+     * The second form is the variable arguments (or "varargs")
+     * form. If the FunctionObject will be used as a constructor,
+     * the member must have the following parameters
+     * <pre>
+     *      (Context cx, Object[] args, Function ctorObj,
+     *       boolean inNewExpr)</pre>
+     * and if it is a Method, be static and return an Object result.<p>
+     *
+     * Otherwise, if the FunctionObject will <i>not</i> be used to define a
+     * constructor, the member must be a static Method with parameters
+     *      (Context cx, Scriptable thisObj, Object[] args,
+     *       Function funObj) </pre>
+     * <pre>
+     * and an Object result.<p>
+     *
+     * When the function varargs form is called as part of a function call,
+     * the <code>args</code> parameter contains the
+     * arguments, with <code>thisObj</code>
+     * set to the JavaScript 'this' value. <code>funObj</code>
+     * is the function object for the invoked function.<p>
+     *
+     * When the constructor varargs form is called or invoked while evaluating
+     * a <code>new</code> expression, <code>args</code> contains the
+     * arguments, <code>ctorObj</code> refers to this FunctionObject, and
+     * <code>inNewExpr</code> is true if and only if  a <code>new</code>
+     * expression caused the call. This supports defining a function that
+     * has different behavior when called as a constructor than when
+     * invoked as a normal function call. (For example, the Boolean
+     * constructor, when called as a function,
+     * will convert to boolean rather than creating a new object.)<p>
+     *
+     * @param name the name of the function
+     * @param methodOrConstructor a java.lang.reflect.Method or a java.lang.reflect.Constructor
+     *                            that defines the object
+     * @param scope enclosing scope of function
+     * @see org.mozilla.javascript.Scriptable
+     */
+    public FunctionObject(String name, Member methodOrConstructor,
+                          Scriptable scope)
+    {
+        String methodName;
+        if (methodOrConstructor instanceof Constructor) {
+            ctor = (Constructor) methodOrConstructor;
+            isStatic = true; // well, doesn't take a 'this'
+            types = ctor.getParameterTypes();
+            methodName = ctor.getName();
+        } else {
+            method = (Method) methodOrConstructor;
+            isStatic = Modifier.isStatic(method.getModifiers());
+            types = method.getParameterTypes();
+            methodName = method.getName();
+        }
+        String myNames[] = { name };
+        super.names = myNames;
+        int length;
+        if (types.length == 4 && (types[1].isArray() || types[2].isArray())) {
+            // Either variable args or an error.
+            if (types[1].isArray()) {
+                if (!isStatic ||
+                    types[0] != Context.class ||
+                    types[1].getComponentType() != ScriptRuntime.ObjectClass ||
+                    types[2] != ScriptRuntime.FunctionClass ||
+                    types[3] != Boolean.TYPE)
+                {
+                    String[] args = { methodName };
+                    String message = Context.getMessage("msg.varargs.ctor",
+                                                        args);
+                    throw Context.reportRuntimeError(message);
+                }
+                parmsLength = VARARGS_CTOR;
+            } else {
+                if (!isStatic ||
+                    types[0] != Context.class ||
+                    types[1] != ScriptRuntime.ScriptableClass ||
+                    types[2].getComponentType() != ScriptRuntime.ObjectClass ||
+                    types[3] != ScriptRuntime.FunctionClass)
+                {
+                    String[] args = { methodName };
+                    String message = Context.getMessage("msg.varargs.fun",
+                                                        args);
+                    throw Context.reportRuntimeError(message);
+                }
+                parmsLength = VARARGS_METHOD;
+            }
+            // XXX check return type
+            length = 1;
+        } else {
+            parmsLength = (short) types.length;
+            boolean hasConversions = false;
+            for (int i=0; i < parmsLength; i++) {
+                Class type = types[i];
+                if (type == ScriptRuntime.ObjectClass) {
+                    // may not need conversions
+                } else if (type == ScriptRuntime.StringClass || 
+                           type == ScriptRuntime.BooleanClass ||
+                           ScriptRuntime.NumberClass.isAssignableFrom(type) ||
+                           Scriptable.class.isAssignableFrom(type))
+                {
+                    hasConversions = true;
+                } else if (type == Boolean.TYPE) {
+                    hasConversions = true;
+                    types[i] = ScriptRuntime.BooleanClass;
+                } else if (type == Byte.TYPE) {
+                    hasConversions = true;
+                    types[i] = ScriptRuntime.ByteClass;
+                } else if (type == Short.TYPE) {
+                    hasConversions = true;
+                    types[i] = ScriptRuntime.ShortClass;
+                } else if (type == Integer.TYPE) {
+                    hasConversions = true;
+                    types[i] = ScriptRuntime.IntegerClass;
+                } else if (type == Float.TYPE) {
+                    hasConversions = true;
+                    types[i] = ScriptRuntime.FloatClass;
+                } else if (type == Double.TYPE) {
+                    hasConversions = true;
+                    types[i] = ScriptRuntime.DoubleClass;
+                } 
+                // Note that long is not supported; see comments above
+                else {
+                    Object[] errArgs = { methodName };
+                    throw Context.reportRuntimeError(
+                        Context.getMessage("msg.bad.parms", errArgs));
+                }
+            }
+            if (!hasConversions)
+                types = null;
+            length = parmsLength;
+        }
+
+        // Initialize length property
+        lengthPropertyValue = (short) length;
+
+        hasVoidReturn = method != null && method.getReturnType() == Void.TYPE;
+        this.argCount = (short) length;
+
+        setParentScope(scope);
+        setPrototype(getFunctionPrototype(scope));
+        Context cx = Context.getCurrentContext();
+        useDynamicScope = cx != null && 
+                          cx.hasCompileFunctionsWithDynamicScope();
+    }
+
+    /**
+     * Override ScriptableObject's has, get, and set in order to define
+     * the "length" property of the function. <p>
+     *
+     * We could also have defined the property using ScriptableObject's
+     * defineProperty method, but that would have consumed a slot in every
+     * FunctionObject. Most FunctionObjects typically don't have any
+     * properties anyway, so having the "length" property would cause us
+     * to allocate an array of slots. <p>
+     *
+     * In particular, this method will return true for 
+     * <code>name.equals("length")</code>
+     * and will delegate to the superclass for all other
+     * values of <code>name</code>.
+     */
+    public boolean has(String name, Scriptable start) {
+        return name.equals("length") || super.has(name, start);
+    }
+
+    /**
+     * Override ScriptableObject's has, get, and set in order to define
+     * the "length" property of the function. <p>
+     *
+     * In particular, this method will return the value defined by
+     * the method used to construct the object (number of parameters
+     * of the method, or 1 if the method is a "varargs" form), unless
+     * setLength has been called with a new value.
+     *
+     * @see org.mozilla.javascript.FunctionObject#setLength
+     */
+    public Object get(String name, Scriptable start) {
+        if (name.equals("length"))
+            return new Integer(lengthPropertyValue);
+        return super.get(name, start);
+    }
+
+    /**
+     * Override ScriptableObject's has, get, and set in order to define
+     * the "length" property of the function. <p>
+     *
+     * In particular, this method will ignore all attempts to set the
+     * "length" property and forward all other requests to ScriptableObject.
+     *
+     * @see org.mozilla.javascript.FunctionObject#setLength
+     */
+    public void put(String name, Scriptable start, Object value) {
+        if (!name.equals("length"))
+            super.put(name, start, value);
+    }
+
+    /**
+     * Set the value of the "length" property.
+     *
+     * <p>Changing the value of the "length" property of a FunctionObject only
+     * affects the value retrieved from get() and does not affect the way
+     * the method itself is called. <p>
+     *
+     * The "length" property will be defined by default as the number
+     * of parameters of the method used to construct the FunctionObject,
+     * unless the method is a "varargs" form, in which case the "length"
+     * property will be defined to 1.
+     *
+     * @param length the new length
+     */
+    public void setLength(short length) {
+        lengthPropertyValue = length;
+    }
+
+    // TODO: Make not public
+    /**
+     * Finds methods of a given name in a given class.
+     *
+     * <p>Searches <code>clazz</code> for methods with name
+     * <code>name</code>. Maintains a cache so that multiple
+     * lookups on the same class are cheap.
+     *
+     * @param clazz the class to search
+     * @param name the name of the methods to find
+     * @return an array of the found methods, or null if no methods
+     *         by that name were found.
+     * @see java.lang.Class#getMethods
+     */
+    public static Method[] findMethods(Class clazz, String name) {
+        return findMethods(getMethodList(clazz), name);
+    }
+    
+    static Method[] findMethods(Method[] methods, String name) {
+        // Usually we're just looking for a single method, so optimize
+        // for that case.
+        Vector v = null;
+        Method first = null;
+        for (int i=0; i < methods.length; i++) {
+            if (methods[i] == null)
+                continue;
+            if (methods[i].getName().equals(name)) {
+                if (first == null) {
+                    first = methods[i];
+                } else {
+                    if (v == null) {
+                        v = new Vector(5);
+                        v.addElement(first);
+                    }
+                    v.addElement(methods[i]);
+                }
+            }
+        }
+        if (v == null) {
+            if (first == null)
+                return null;
+            Method[] single = { first };
+            return single;
+        }
+        Method[] result = new Method[v.size()];
+        v.copyInto(result);
+        return result;
+    }
+
+    static Method[] getMethodList(Class clazz) {
+        Method[] cached = methodsCache; // get once to avoid synchronization
+        if (cached != null && cached[0].getDeclaringClass() == clazz)
+            return cached;
+        Method[] methods = null;
+        try {
+            // getDeclaredMethods may be rejected by the security manager
+            // but getMethods is more expensive
+            if (!sawSecurityException) 
+                methods = clazz.getDeclaredMethods();
+        } catch (SecurityException e) {
+            // If we get an exception once, give up on getDeclaredMethods
+            sawSecurityException = true;
+        }
+        if (methods == null) {
+            methods = clazz.getMethods();
+        }
+        int count = 0;
+        for (int i=0; i < methods.length; i++) {
+            if (sawSecurityException 
+                ? methods[i].getDeclaringClass() != clazz
+                : !Modifier.isPublic(methods[i].getModifiers()))
+            {
+                methods[i] = null;
+            } else {
+                count++;
+            }
+        }
+        Method[] result = new Method[count];
+        int j=0;
+        for (int i=0; i < methods.length; i++) {
+            if (methods[i] != null)
+                result[j++] = methods[i];
+        }
+        if (result.length > 0 && Context.isCachingEnabled)
+            methodsCache = result;
+        return result;
+    }
+
+    /**
+     * Define this function as a JavaScript constructor.
+     * <p>
+     * Sets up the "prototype" and "constructor" properties. Also
+     * calls setParent and setPrototype with appropriate values.
+     * Then adds the function object as a property of the given scope, using
+     *      <code>prototype.getClassName()</code>
+     * as the name of the property.
+     *
+     * @param scope the scope in which to define the constructor (typically
+     *              the global object)
+     * @param prototype the prototype object
+     * @see org.mozilla.javascript.Scriptable#setParentScope
+     * @see org.mozilla.javascript.Scriptable#setPrototype
+     * @see org.mozilla.javascript.Scriptable#getClassName
+     */
+    public void addAsConstructor(Scriptable scope, Scriptable prototype) {
+        setParentScope(scope);
+        setPrototype(getFunctionPrototype(scope));
+        prototype.setParentScope(this);
+        final int attr = ScriptableObject.DONTENUM  |
+                         ScriptableObject.PERMANENT |
+                         ScriptableObject.READONLY;
+        defineProperty("prototype", prototype, attr);
+        String name = prototype.getClassName();
+        if (!name.equals("With")) {
+            // A "With" object would delegate these calls to the prototype:
+            // not the right thing to do here!
+            if (prototype instanceof ScriptableObject) {
+                ((ScriptableObject) prototype).defineProperty("constructor",
+                                                              this, attr);
+            } else {
+                prototype.put("constructor", prototype, this);
+            }
+        }
+        if (scope instanceof ScriptableObject) {
+            ((ScriptableObject) scope).defineProperty(name, this,
+                ScriptableObject.DONTENUM);
+        } else {
+            scope.put(name, scope, this);
+        }
+        setParentScope(scope);
+    }
+
+    static public Object convertArg(Scriptable scope,
+                                    Object arg, Class desired)
+    {
+        if (desired == ScriptRuntime.BooleanClass 
+                                    || desired == Boolean.TYPE)
+            return ScriptRuntime.toBoolean(arg) ? Boolean.TRUE 
+                                               : Boolean.FALSE;
+        else if (desired == ScriptRuntime.StringClass)
+            return ScriptRuntime.toString(arg);
+        else if (desired == ScriptRuntime.IntegerClass
+                                        || desired == Integer.TYPE)
+            return new Integer(ScriptRuntime.toInt32(arg));
+        else if (desired == ScriptRuntime.DoubleClass 
+                                        || desired == Double.TYPE)
+            return new Double(ScriptRuntime.toNumber(arg));
+        else if (desired == ScriptRuntime.ScriptableClass)
+            return ScriptRuntime.toObject(scope, arg);
+        else if (desired == ScriptRuntime.ObjectClass)
+            return arg;
+        // Note that the long type is not supported; see the javadoc for
+        // the constructor for this class
+        else {
+            Object[] errArgs = { desired.getName() };
+            throw Context.reportRuntimeError(
+                    Context.getMessage("msg.cant.convert", errArgs));
+        }
+    }
+
+    /**
+     * Performs conversions on argument types if needed and
+     * invokes the underlying Java method or constructor.
+     * <p>
+     * Implements Function.call.
+     *
+     * @see org.mozilla.javascript.Function#call
+     * @exception JavaScriptException if the underlying Java method or 
+     *            constructor threw an exception
+     */
+    public Object call(Context cx, Scriptable scope, Scriptable thisObj,
+                       Object[] args)
+        throws JavaScriptException
+    {
+        if (parmsLength < 0)
+            return callVarargs(cx, thisObj, args, false);
+
+        if (!isStatic) {
+            // OPT: cache "clazz"?
+            Class clazz = method != null ? method.getDeclaringClass()
+                                         : ctor.getDeclaringClass();
+            while (!clazz.isInstance(thisObj)) {
+                thisObj = thisObj.getPrototype();
+                if (thisObj == null || !useDynamicScope) {
+                    // Couldn't find an object to call this on.
+                    Object[] errArgs = { names[0] };
+                    String msg = Context.getMessage("msg.incompat.call", errArgs);
+                    throw NativeGlobal.constructError(cx, "TypeError", msg, scope);
+                }
+            }
+        }
+        Object[] invokeArgs;
+        int i;
+        if (parmsLength == args.length) {
+            invokeArgs = args;
+            // avoid copy loop if no conversions needed
+            i = (types == null) ? parmsLength : 0;
+        } else {
+            invokeArgs = new Object[parmsLength];
+            i = 0;
+        }
+        for (; i < parmsLength; i++) {
+            Object arg = (i < args.length)
+                         ? args[i]
+                         : Undefined.instance;
+            if (types != null) {
+                arg = convertArg(this, arg, types[i]);
+            }
+            invokeArgs[i] = arg;
+        }
+        try {
+            Object result = (method != null)
+                            ? method.invoke(thisObj, invokeArgs)
+                            : ctor.newInstance(invokeArgs);
+            return hasVoidReturn ? Undefined.instance : result;
+        }
+        catch (InvocationTargetException e) {
+            throw JavaScriptException.wrapException(scope, e);
+        }
+        catch (IllegalAccessException e) {
+            throw WrappedException.wrapException(e);
+        }
+        catch (InstantiationException e) {
+            throw WrappedException.wrapException(e);
+        }
+    }
+
+    /**
+     * Performs conversions on argument types if needed and
+     * invokes the underlying Java method or constructor
+     * to create a new Scriptable object.
+     * <p>
+     * Implements Function.construct.
+     *
+     * @param cx the current Context for this thread
+     * @param scope the scope to execute the function relative to. This
+     *              set to the value returned by getParentScope() except
+     *              when the function is called from a closure.
+     * @param args arguments to the constructor
+     * @see org.mozilla.javascript.Function#construct
+     * @exception JavaScriptException if the underlying Java method or constructor
+     *            threw an exception
+     */
+    public Scriptable construct(Context cx, Scriptable scope, Object[] args)
+        throws JavaScriptException
+    {
+        if (method == null || parmsLength == VARARGS_CTOR) {
+            Scriptable result;
+            if (method != null) {
+                // Ugly: allow variable-arg constructors that need access to the 
+                // scope to get it from the Context. Cleanest solution would be
+                // to modify the varargs form, but that would require users with 
+                // the old form to change their code.
+                cx.ctorScope = scope;
+                result = (Scriptable) callVarargs(cx, null, args, true);
+                cx.ctorScope = null;
+            } else {
+                result = (Scriptable) call(cx, scope, null, args);
+            }
+
+            if (result.getPrototype() == null)
+                result.setPrototype(getClassPrototype());
+            if (result.getParentScope() == null) {
+                Scriptable parent = getParentScope();
+                if (result != parent)
+                    result.setParentScope(parent);
+            }
+
+            return result;
+        } else if (method != null && !isStatic) {
+            Scriptable result;
+            try {
+                result = (Scriptable) method.getDeclaringClass().newInstance();
+            } catch (IllegalAccessException e) {
+                throw WrappedException.wrapException(e);
+            } catch (InstantiationException e) {
+                throw WrappedException.wrapException(e);
+            }
+
+            result.setPrototype(getClassPrototype());
+            result.setParentScope(getParentScope());
+
+            Object val = call(cx, scope, result, args);
+            if (val != null && val != Undefined.instance &&
+                val instanceof Scriptable)
+            {
+                return (Scriptable) val;
+            }
+            return result;
+        }
+
+        return super.construct(cx, scope, args);
+    }
+
+    private Object callVarargs(Context cx, Scriptable thisObj, Object[] args,
+                               boolean inNewExpr)
+        throws JavaScriptException
+    {
+        try {
+            if (parmsLength == VARARGS_METHOD) {
+                Object[] invokeArgs = { cx, thisObj, args, this };
+                Object result = method.invoke(null, invokeArgs);
+                return hasVoidReturn ? Undefined.instance : result;
+            } else {
+                Boolean b = inNewExpr ? Boolean.TRUE : Boolean.FALSE;
+                Object[] invokeArgs = { cx, args, this, b };
+                return (method == null)
+                       ? ctor.newInstance(invokeArgs)
+                       : method.invoke(null, invokeArgs);
+            }
+        }
+        catch (InvocationTargetException e) {
+            Throwable target = e.getTargetException();
+            if (target instanceof EvaluatorException)
+                throw (EvaluatorException) target;
+            if (target instanceof EcmaError)
+                throw (EcmaError) target;
+            Scriptable scope = thisObj == null ? this : thisObj;
+            throw JavaScriptException.wrapException(scope, target);
+        }
+        catch (IllegalAccessException e) {
+            throw WrappedException.wrapException(e);
+        }
+        catch (InstantiationException e) {
+            throw WrappedException.wrapException(e);
+        }
+    }
+    
+    boolean isVarArgsMethod() { 
+        return parmsLength == VARARGS_METHOD;
+    }
+
+    boolean isVarArgsConstructor() { 
+        return parmsLength == VARARGS_CTOR;
+    }
+
+    private static final short VARARGS_METHOD = -1;
+    private static final short VARARGS_CTOR =   -2;
+    
+    private static boolean sawSecurityException;
+
+    static Method[] methodsCache;
+
+    Method method;
+    Constructor ctor;
+    private Class[] types;
+    private short parmsLength;
+    private short lengthPropertyValue;
+    private boolean hasVoidReturn;
+    private boolean isStatic;
+    private boolean useDynamicScope;
+}

mozilla/js/rhino/org/mozilla/javascript/ImporterTopLevel.java

@@ -0,0 +1,144 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+// API class
+
+package org.mozilla.javascript;
+
+import java.util.Vector;
+
+/**
+ * Class ImporterTopLevel
+ * 
+ * This class defines a ScriptableObject that can be instantiated 
+ * as a top-level ("global") object to provide functionality similar
+ * to Java's "import" statement.
+ * <p>
+ * This class can be used to create a top-level scope using the following code: 
+ * <pre>
+ *  Scriptable scope = cx.initStandardObjects(new ImporterTopLevel());
+ * </pre>
+ * Then JavaScript code will have access to the following methods:
+ * <ul>
+ * <li>importClass - will "import" a class by making its unqualified name 
+ *                   available as a property of the top-level scope
+ * <li>importPackage - will "import" all the classes of the package by 
+ *                     searching for unqualified names as classes qualified
+ *                     by the given package.
+ * </ul>
+ * The following code from the shell illustrates this use:
+ * <pre>
+ * js> importClass(java.io.File)
+ * js> f = new File('help.txt')
+ * help.txt
+ * js> importPackage(java.util)
+ * js> v = new Vector()
+ * []
+ * 
+ * @author Norris Boyd
+ */
+public class ImporterTopLevel extends ScriptableObject {
+    
+    public ImporterTopLevel() {
+        String[] names = { "importClass", "importPackage" };
+
+        try {
+            this.defineFunctionProperties(names, ImporterTopLevel.class,
+                                          ScriptableObject.DONTENUM);
+        } catch (PropertyException e) {
+            throw new Error();  // should never happen
+        }
+    }
+    
+    public String getClassName() { 
+        return "global";
+    }
+    
+    public Object get(String name, Scriptable start) {
+        Object result = super.get(name, start);
+        if (result == NOT_FOUND && importedPackages != null) {
+            for (int i=0; i < importedPackages.size(); i++) {
+                Object o = importedPackages.elementAt(i);
+                NativeJavaPackage p = (NativeJavaPackage) o;
+                Object v = p.getPkgProperty(name, start, false);
+                if (v != null && !(v instanceof NativeJavaPackage)) {
+                    if (result == NOT_FOUND) {
+                        result = v;
+                    } else {
+                        String[] args = { result.toString(), v.toString() };
+                        throw Context.reportRuntimeError(
+                            Context.getMessage("msg.ambig.import", 
+                                               args));
+                    }
+                }
+            }
+        }
+        return result;          
+    }
+    
+    public void importClass(Object cl) {
+        if (!(cl instanceof NativeJavaClass)) {
+            String[] args = { Context.toString(cl) };
+            throw Context.reportRuntimeError(
+                Context.getMessage("msg.not.class", args));
+        }
+        String s = ((NativeJavaClass) cl).getClassObject().getName();
+        String n = s.substring(s.lastIndexOf('.')+1);
+        Object val = this.get(n, this);
+        if (val != NOT_FOUND && val != cl) {
+            String[] args = { n };
+            throw Context.reportRuntimeError(
+                Context.getMessage("msg.prop.defined", args));
+        }
+        this.defineProperty(n, cl, DONTENUM);
+    }
+    
+    public void importPackage(Object pkg) {
+        if (importedPackages == null)
+            importedPackages = new Vector();
+        if (!(pkg instanceof NativeJavaPackage)) {
+            String[] args = { Context.toString(pkg) };
+            throw Context.reportRuntimeError(
+                Context.getMessage("msg.not.pkg", args));
+        }
+        for (int i=0; i < importedPackages.size(); i++) {
+            if (pkg == importedPackages.elementAt(i))
+                return;     // allready in list
+        }
+        importedPackages.addElement(pkg);
+    }
+    
+    private Vector importedPackages;
+}

mozilla/js/rhino/org/mozilla/javascript/InterpretedFunction.java

@@ -0,0 +1,113 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-2000 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Roger Lawrence
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+import java.util.*;
+import org.mozilla.javascript.debug.DebuggableScript;
+
+class InterpretedFunction extends NativeFunction implements DebuggableScript {
+    
+    InterpretedFunction(InterpreterData theData, Context cx)
+    {
+        itsData = theData;
+        init(cx);
+    }
+    
+    void init(Context cx)
+    {
+// probably too much copying going on from theData to the InterpretedFunction object
+// should pass them as parameters - unless we need them in the data block anyway?
+
+        names = new String[itsData.itsVariableTable.size() + 1];
+        names[0] = itsData.itsName;
+        for (int i = 0; i < itsData.itsVariableTable.size(); i++)
+            names[i + 1] = itsData.itsVariableTable.getName(i);
+        argCount = (short)itsData.itsVariableTable.getParameterCount();
+        source = itsData.itsSource;
+        nestedFunctions = itsData.itsNestedFunctions;
+        if (cx != null)
+            version = (short)cx.getLanguageVersion();
+    }
+    
+    InterpretedFunction(InterpretedFunction theOther,
+                        Scriptable theScope, Context cx)
+    {
+        itsData = theOther.itsData;
+        itsClosure = theScope;
+        init(cx);
+    }
+    
+    public Object call(Context cx, Scriptable scope, Scriptable thisObj,
+                       Object[] args)
+        throws JavaScriptException
+    {            
+        itsData.itsCX = cx;
+        if (itsClosure != null)
+        	scope = itsClosure;
+        else if (!itsData.itsUseDynamicScope)
+            scope = getParentScope();
+        if (itsData.itsNeedsActivation)
+            scope = ScriptRuntime.initVarObj(cx, scope, this, thisObj, args);
+        itsData.itsScope = scope;
+        itsData.itsThisObj = thisObj;
+        itsData.itsInArgs = args;
+        return Interpreter.interpret(itsData, this);
+    }
+    
+    public Scriptable getScriptable() {
+        return this;
+    }
+    
+    public String getSourceName() {
+        return itsData.itsSourceFile;
+    }
+    
+    public Enumeration getLineNumbers() { 
+        return itsData.itsLineNumberTable.keys();
+    }
+    
+    public boolean placeBreakpoint(int line) { // XXX throw exn?
+        return itsData.placeBreakpoint(line);
+    }
+    
+    public boolean removeBreakpoint(int line) {
+        return itsData.removeBreakpoint(line);
+    }
+    
+    InterpreterData itsData;
+    Scriptable itsClosure;
+}
+    

mozilla/js/rhino/org/mozilla/javascript/InterpretedScript.java

@@ -0,0 +1,96 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Roger Lawrence
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+import org.mozilla.javascript.debug.*;
+
+import java.util.*;
+
+public class InterpretedScript extends NativeScript implements DebuggableScript {
+
+    InterpretedScript(InterpreterData theData, Context cx)
+    {
+        itsData = theData;
+        names = new String[itsData.itsVariableTable.size() + 1];
+        names[0] = "";
+        for (int i = 0; i < itsData.itsVariableTable.size(); i++)
+            names[i + 1] = itsData.itsVariableTable.getName(i);
+        nestedFunctions = itsData.itsNestedFunctions;
+        version = (short)cx.getLanguageVersion();   
+    }
+    
+    public Object exec(Context cx, Scriptable scope)
+        throws JavaScriptException
+    {
+        return call(cx, scope, scope, null);    
+    }
+
+    public Object call(Context cx, Scriptable scope, 
+                       Scriptable thisObj, Object[] args)
+        throws JavaScriptException
+    {
+        scope = ScriptRuntime.initScript(cx, scope, this, thisObj, 
+                                         itsData.itsFromEvalCode);
+        itsData.itsCX = cx;
+        itsData.itsScope = scope;
+        itsData.itsThisObj = thisObj;
+        itsData.itsInArgs = args;
+        return Interpreter.interpret(itsData, this);    
+    }
+    
+    public Scriptable getScriptable() {
+        return this;
+    }
+    
+    public String getSourceName() {
+        return itsData.itsSourceFile;
+    }
+    
+    public Enumeration getLineNumbers() {
+        return itsData.itsLineNumberTable.keys();
+    }
+    
+    public boolean placeBreakpoint(int line) { // XXX throw exn?
+        return itsData.placeBreakpoint(line);
+    }
+    
+    public boolean removeBreakpoint(int line) {
+        return itsData.removeBreakpoint(line);
+    }
+    
+    InterpreterData itsData;
+}
+

mozilla/js/rhino/org/mozilla/javascript/InterpreterData.java

@@ -0,0 +1,138 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-2000 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Roger Lawrence
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+import java.util.Vector;
+
+class InterpreterData {
+    
+    static final int INITIAL_MAX_ICODE_LENGTH = 1024;
+    static final int INITIAL_STRINGTABLE_SIZE = 64;
+    static final int INITIAL_NUMBERTABLE_SIZE = 64;
+    
+    InterpreterData(int lastICodeTop, int lastStringTableIndex, 
+                    int lastNumberTableIndex, Object securityDomain,
+                    boolean useDynamicScope)
+    {
+        itsICodeTop = lastICodeTop == 0 
+                      ? INITIAL_MAX_ICODE_LENGTH
+                      : lastICodeTop * 2;
+        itsICode = new byte[itsICodeTop];
+
+        itsStringTable = new String[lastStringTableIndex == 0
+                                    ? INITIAL_STRINGTABLE_SIZE
+                                    : lastStringTableIndex * 2];
+
+        itsNumberTable = new Number[lastNumberTableIndex == 0
+                                    ? INITIAL_NUMBERTABLE_SIZE
+                                    : lastNumberTableIndex * 2];
+        
+        itsUseDynamicScope = useDynamicScope;
+        if (securityDomain == null && Context.isSecurityDomainRequired())
+            throw new SecurityException("Required security context missing");
+        this.securityDomain = securityDomain;
+    }
+    
+    public boolean placeBreakpoint(int line) { // XXX throw exn?
+        int offset = getOffset(line);
+        if (offset != -1 && (itsICode[offset] == TokenStream.LINE ||
+                             itsICode[offset] == TokenStream.BREAKPOINT))
+        {
+            itsICode[offset] = (byte) TokenStream.BREAKPOINT;
+            return true;
+        }
+        return false;
+    }
+    
+    public boolean removeBreakpoint(int line) {
+        int offset = getOffset(line);
+        if (offset != -1 && itsICode[offset] == TokenStream.BREAKPOINT)
+        {
+            itsICode[offset] = (byte) TokenStream.LINE;
+            return true;
+        }
+        return false;
+    }
+    
+    private int getOffset(int line) {
+        Object offset = itsLineNumberTable.get(new Integer(line));
+        if (offset != null && offset instanceof Integer) {
+            int i = ((Integer)offset).intValue();
+            if (i >= 0 && i < itsICode.length)
+            {
+                return i;
+            }
+        }
+        return -1;
+    }    
+    
+    VariableTable itsVariableTable;
+    
+    String itsName;
+    String itsSource;
+    String itsSourceFile;
+    boolean itsNeedsActivation;
+    boolean itsFromEvalCode;
+    boolean itsUseDynamicScope;
+    byte itsFunctionType;
+
+    String[] itsStringTable;
+    int itsStringTableIndex;
+
+    Number[] itsNumberTable;
+    int itsNumberTableIndex;
+    
+    InterpretedFunction[] itsNestedFunctions;
+    
+    Object[] itsRegExpLiterals;
+
+    byte[] itsICode;
+    int itsICodeTop;
+    
+    int itsMaxLocals;
+    int itsMaxArgs;
+    int itsMaxStack;
+    int itsMaxTryDepth;
+    
+    java.util.Hashtable itsLineNumberTable;
+
+    Object securityDomain;
+    
+    Context itsCX;
+    Scriptable itsScope;
+    Scriptable itsThisObj;
+    Object[] itsInArgs;
+}

mozilla/js/rhino/org/mozilla/javascript/InterpreterFrame.java

@@ -0,0 +1,77 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-2000 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+import java.util.Vector;
+
+import org.mozilla.javascript.debug.*;
+
+class InterpreterFrame implements Frame {
+    
+    InterpreterFrame(Scriptable scope, InterpreterData data, Scriptable obj) {
+        this.scope = scope;
+        this.data = data;
+        this.lineNumber = -1;
+        this.obj = obj;
+    }
+
+    public Scriptable getVariableObject() {
+        return scope;
+    }
+    
+    public String getSourceName() {
+        return data.itsSourceFile;
+    }
+    
+    public void setLineNumber(int lineNumber) {
+        this.lineNumber = lineNumber;
+    }
+    
+    public int getLineNumber() {
+        return lineNumber;
+    }
+    
+    public DebuggableScript getScript() {
+        if (obj instanceof DebuggableScript)
+            return (DebuggableScript) obj;
+        return null;
+    }
+    
+    private Scriptable scope;
+    private InterpreterData data;
+    private Scriptable obj;
+    private int lineNumber;
+}

mozilla/js/rhino/org/mozilla/javascript/JavaAdapter.java

@@ -0,0 +1,849 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Patrick Beard
+ * Norris Boyd
+ * Mike McCabe
+ * Matthias Radestock
+ * Andi Vajda
+ * Andrew Wason
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+import org.mozilla.classfile.*;
+import java.lang.reflect.*;
+import java.io.*;
+import java.util.*;
+
+public class JavaAdapter extends ScriptableObject {
+    public boolean equals(Object obj) {
+    	return super.equals(obj);
+    }
+    
+    public String getClassName() {
+        return "JavaAdapter";
+    }
+
+    public static Object convertResult(Object result, String classname)
+        throws ClassNotFoundException 
+    {
+        Class c = ScriptRuntime.loadClassName(classname);
+        if (result == Undefined.instance && 
+            (c != ScriptRuntime.ObjectClass && 
+             c != ScriptRuntime.StringClass))
+        {
+            // Avoid an error for an undefined value; return null instead.
+            return null;
+        }
+        return NativeJavaObject.coerceType(c, result);
+    }
+    
+    public static Object js_JavaAdapter(Context cx, Object[] args, 
+                                        Function ctorObj, boolean inNewExpr)
+        throws InstantiationException, NoSuchMethodException, 
+               IllegalAccessException, InvocationTargetException,
+               ClassNotFoundException
+    {
+        Class superClass = Object.class;
+        Class[] intfs = new Class[args.length-1];
+        int interfaceCount = 0;
+        for (int i=0; i < args.length-1; i++) {
+            if (!(args[i] instanceof NativeJavaClass)) {
+                // TODO: report error
+                throw new RuntimeException("expected java class object");
+            }
+            Class c = ((NativeJavaClass) args[i]).getClassObject();
+            if (!c.isInterface()) {
+                superClass = c;
+                break;
+            }
+            intfs[interfaceCount++] = c;
+        }
+        
+        Class[] interfaces = new Class[interfaceCount];
+        System.arraycopy(intfs, 0, interfaces, 0, interfaceCount);
+        Scriptable obj = (Scriptable) args[args.length - 1];
+        
+        ClassSignature sig = new ClassSignature(superClass, interfaces, obj);
+        Class adapterClass = (Class) generatedClasses.get(sig);
+        if (adapterClass == null) {
+            String adapterName = "adapter" + serial++;
+            adapterClass = createAdapterClass(cx, obj, adapterName, 
+                                              superClass, interfaces, 
+                                              null, null);
+            generatedClasses.put(sig, adapterClass);
+        }
+        
+        Class[] ctorParms = { Scriptable.class };
+        Object[] ctorArgs = { obj };
+        Object v = adapterClass.getConstructor(ctorParms).newInstance(ctorArgs);
+        return cx.toObject(v, ScriptableObject.getTopLevelScope(ctorObj));                           
+    }
+
+    public static Class createAdapterClass(Context cx, Scriptable jsObj,
+                                           String adapterName, Class superClass, 
+                                           Class[] interfaces, 
+                                           String scriptClassName,
+                                           ClassNameHelper nameHelper)
+        throws ClassNotFoundException
+    {
+        ClassFileWriter cfw = new ClassFileWriter(adapterName, 
+                                                  superClass.getName(), 
+                                                  "<adapter>");
+        cfw.addField("self", "Lorg/mozilla/javascript/Scriptable;",
+                     (short) (ClassFileWriter.ACC_PUBLIC | 
+                              ClassFileWriter.ACC_FINAL));
+        int interfacesCount = interfaces == null ? 0 : interfaces.length;
+        for (int i=0; i < interfacesCount; i++) {
+            if (interfaces[i] != null)
+                cfw.addInterface(interfaces[i].getName());
+        }
+        
+        String superName = superClass.getName().replace('.', '/');
+        generateCtor(cfw, adapterName, superName);
+        if (scriptClassName != null)
+            generateEmptyCtor(cfw, adapterName, superName, scriptClassName);
+        
+        Hashtable generatedOverrides = new Hashtable();
+        Hashtable generatedMethods = new Hashtable();
+        
+        // generate methods to satisfy all specified interfaces.
+        for (int i = 0; i < interfacesCount; i++) {
+            Method[] methods = interfaces[i].getMethods();
+            for (int j = 0; j < methods.length; j++) {
+            	Method method = methods[j];
+                int mods = method.getModifiers();
+                if (Modifier.isStatic(mods) || Modifier.isFinal(mods))
+                    continue;
+                // make sure to generate only one instance of a particular 
+                // method/signature.
+                String methodName = method.getName();
+            	String methodKey = methodName + getMethodSignature(method);
+            	if (! generatedOverrides.containsKey(methodKey)) {
+                    generateMethod(cfw, adapterName, methodName,
+                                   method.getParameterTypes(),
+                                   method.getReturnType());
+                    generatedOverrides.put(methodKey, Boolean.TRUE);
+                    generatedMethods.put(methodName, Boolean.TRUE);
+                }
+            }
+        }
+
+        // Now, go through the superclasses methods, checking for abstract 
+        // methods or additional methods to override.
+
+        // generate any additional overrides that the object might contain.
+        Method[] methods = superClass.getMethods();
+        for (int j = 0; j < methods.length; j++) {
+            Method method = methods[j];
+            int mods = method.getModifiers();
+            if (Modifier.isStatic(mods) || Modifier.isFinal(mods))
+                continue;
+            // if a method is marked abstract, must implement it or the 
+            // resulting class won't be instantiable. otherwise, if the object 
+            // has a property of the same name, then an override is intended.
+            boolean isAbstractMethod = Modifier.isAbstract(mods);
+            if (isAbstractMethod || 
+                (jsObj != null && jsObj.has(method.getName(), jsObj)))
+            {
+                // make sure to generate only one instance of a particular 
+                // method/signature.
+                String methodName = method.getName();
+                String methodSignature = getMethodSignature(method);
+                String methodKey = methodName + methodSignature;
+                if (! generatedOverrides.containsKey(methodKey)) {
+                    generateMethod(cfw, adapterName, methodName,
+                                   method.getParameterTypes(),
+                                   method.getReturnType());
+                    generatedOverrides.put(methodKey, Boolean.TRUE);
+                    generatedMethods.put(methodName, Boolean.TRUE);
+                }
+                // if a method was overridden, generate a "super$method"
+                // which lets the delegate call the superclass' version.
+                if (!isAbstractMethod) {
+                    generateSuper(cfw, adapterName, superName,
+                                  methodName, methodSignature,
+                                  method.getParameterTypes(),
+                                  method.getReturnType());
+                }
+            }
+        }
+        
+        // Generate Java methods, fields for remaining properties that
+        // are not overrides.
+        Object[] ids = jsObj.getIds();
+        for (int j=0; j < ids.length; j++) {
+            if (!(ids[j] instanceof String)) 
+                continue;
+            String id = (String) ids[j];
+            if (generatedMethods.containsKey(id))
+                continue;
+            Object f = jsObj.get(id, jsObj);
+            int length;
+            if (f instanceof Scriptable) {
+                Scriptable p = (Scriptable) f;
+                if (!(p instanceof Function))
+                    continue;
+                length = (int) Context.toNumber(
+                            ScriptableObject.getProperty(p, "length"));
+            } else if (f instanceof FunctionNode) {
+                length = ((FunctionNode) f).getVariableTable().getParameterCount();
+            } else {
+                continue;
+            }
+            Class[] parms = new Class[length];
+            for (int k=0; k < length; k++) 
+                parms[k] = Object.class;
+            generateMethod(cfw, adapterName, id, parms, Object.class);
+        }  
+        
+        ByteArrayOutputStream out = new ByteArrayOutputStream(512);
+        try {
+            cfw.write(out);
+        }
+        catch (IOException ioe) {
+            throw new RuntimeException("unexpected IOException");
+        }
+        byte[] bytes = out.toByteArray();
+        
+        if (nameHelper != null)
+        {
+            if (nameHelper.getGeneratingDirectory() != null) {
+                try {
+                    int lastDot = adapterName.lastIndexOf('.');
+                    if (lastDot != -1)
+                        adapterName = adapterName.substring(lastDot+1);
+                    String filename = nameHelper.getTargetClassFileName(adapterName);
+                    FileOutputStream file = new FileOutputStream(filename);
+                    file.write(bytes);
+                    file.close();
+                }
+                catch (IOException iox) {
+                    throw WrappedException.wrapException(iox);
+                }
+                return null;
+            } else {
+                try {
+                    ClassOutput classOutput = nameHelper.getClassOutput();
+
+                    if (classOutput != null) {
+                        OutputStream cOut =
+                            classOutput.getOutputStream(adapterName);
+
+                        cOut.write(bytes);
+                        cOut.close();
+                    }
+                } catch (IOException iox) {
+                    throw WrappedException.wrapException(iox);
+                }
+            }
+        }
+            
+        SecuritySupport ss = cx.getSecuritySupport();
+        if (ss != null)  {
+            Object securityDomain = cx.getSecurityDomainForStackDepth(-1);
+            return ss.defineClass(adapterName, bytes, securityDomain);
+        } else {
+            if (classLoader == null)
+                classLoader = new MyClassLoader();
+            classLoader.defineClass(adapterName, bytes);
+            return classLoader.loadClass(adapterName, true);
+        }
+    }
+    
+    /**
+     * Utility method, which dynamically binds a Context to the current thread, 
+     * if none already exists.
+     */
+    public static Object callMethod(Scriptable object, String methodId,
+                                    Object[] args) 
+    {
+    	if (object.has(methodId, object)) {
+	        try {
+		        Context cx = Context.enter();
+		        Object fun = object.get(methodId, object);
+		        return ScriptRuntime.call(cx, fun, object, args, object);
+	        } catch (JavaScriptException ex) {
+	              // TODO: could occur
+	        } finally {	
+	            Context.exit();
+	        }
+	    }
+        return Context.getUndefinedValue();
+    }
+    
+    public static Scriptable toObject(Object value, Scriptable scope,
+                                      Class staticType)
+    {
+        Context.enter();
+        try {
+            return Context.toObject(value, scope, staticType);
+        } finally {
+            Context.exit();
+        }
+    }
+    
+    private static void generateCtor(ClassFileWriter cfw, String adapterName, 
+                                     String superName) 
+    {
+        cfw.startMethod("<init>", 
+                        "(Lorg/mozilla/javascript/Scriptable;)V",
+                        ClassFileWriter.ACC_PUBLIC);
+        
+        // Invoke base class constructor
+        cfw.add(ByteCode.ALOAD_0);  // this
+        cfw.add(ByteCode.INVOKESPECIAL, superName, "<init>", "()", "V");
+        
+        // Save parameter in instance variable "self"
+        cfw.add(ByteCode.ALOAD_0);  // this
+        cfw.add(ByteCode.ALOAD_1);  // first arg
+        cfw.add(ByteCode.PUTFIELD, adapterName, "self", 
+                "Lorg/mozilla/javascript/Scriptable;");
+
+        // Set the prototype of the js object to be a LiveConnect 
+        // wrapper of the generated class's object
+        cfw.add(ByteCode.ALOAD_1);  // first arg
+        cfw.add(ByteCode.ALOAD_0);  // this
+        cfw.add(ByteCode.INVOKESTATIC,
+                "org/mozilla/javascript/ScriptRuntime",
+                "setAdapterProto",
+                "(Lorg/mozilla/javascript/Scriptable;" +
+                 "Ljava/lang/Object;)",
+                "V");
+        
+        cfw.add(ByteCode.RETURN);
+        cfw.stopMethod((short)20, null); // TODO: magic number "20"
+    }
+
+    private static void generateEmptyCtor(ClassFileWriter cfw, String adapterName, 
+                                          String superName, String scriptClassName) 
+    {
+        cfw.startMethod("<init>", "()V", ClassFileWriter.ACC_PUBLIC);
+        
+        // Invoke base class constructor
+        cfw.add(ByteCode.ALOAD_0);  // this
+        cfw.add(ByteCode.INVOKESPECIAL, superName, "<init>", "()", "V");
+        
+        // Load script class
+        cfw.add(ByteCode.NEW, scriptClassName);
+        cfw.add(ByteCode.DUP);
+        cfw.add(ByteCode.INVOKESPECIAL, scriptClassName, "<init>", "()", "V");
+        
+        // Run script and save resulting scope
+        cfw.add(ByteCode.INVOKESTATIC,
+                "org/mozilla/javascript/ScriptRuntime",
+                "runScript",
+                "(Lorg/mozilla/javascript/Script;)",
+                "Lorg/mozilla/javascript/Scriptable;");
+        cfw.add(ByteCode.ASTORE_1);
+                
+        // Save the Scriptable in instance variable "self"
+        cfw.add(ByteCode.ALOAD_0);  // this
+        cfw.add(ByteCode.ALOAD_1);  // the Scriptable
+        cfw.add(ByteCode.PUTFIELD, adapterName, "self", 
+                "Lorg/mozilla/javascript/Scriptable;");
+
+        // Set the prototype of the js object to be a LiveConnect 
+        // wrapper of the generated class's object
+        cfw.add(ByteCode.ALOAD_1);  // the Scriptable
+        cfw.add(ByteCode.ALOAD_0);  // this
+        cfw.add(ByteCode.INVOKESTATIC,
+                "org/mozilla/javascript/ScriptRuntime",
+                "setAdapterProto",
+                "(Lorg/mozilla/javascript/Scriptable;" +
+                 "Ljava/lang/Object;)",
+                "V");
+
+        cfw.add(ByteCode.RETURN);
+        cfw.stopMethod((short)20, null); // TODO: magic number "20"
+    }
+
+    /**
+     * Generates code to create a java.lang.Boolean, java.lang.Character or a 
+     * java.lang.Double to wrap the specified primitive parameter. Leaves the 
+     * wrapper object on the top of the stack.
+     */
+    private static int generateWrapParam(ClassFileWriter cfw, int paramOffset, 
+                                         Class paramType) 
+    {
+        if (paramType.equals(Boolean.TYPE)) {
+            // wrap boolean values with java.lang.Boolean.
+            cfw.add(ByteCode.NEW, "java/lang/Boolean");
+            cfw.add(ByteCode.DUP);
+            cfw.add(ByteCode.ILOAD, paramOffset++);
+            cfw.add(ByteCode.INVOKESPECIAL, "java/lang/Boolean", 
+                    "<init>", "(Z)", "V");
+        } else
+            if (paramType.equals(Character.TYPE)) {
+                // Create a string of length 1 using the character parameter.
+                cfw.add(ByteCode.NEW, "java/lang/String");
+                cfw.add(ByteCode.DUP);
+                cfw.add(ByteCode.ICONST_1);       
+                cfw.add(ByteCode.NEWARRAY, ByteCode.T_CHAR);
+                cfw.add(ByteCode.DUP);
+                cfw.add(ByteCode.ICONST_0);
+                cfw.add(ByteCode.ILOAD, paramOffset++);
+                cfw.add(ByteCode.CASTORE);                
+                cfw.add(ByteCode.INVOKESPECIAL, "java/lang/String", 
+                        "<init>", "([C)", "V");
+            } else {
+                // convert all numeric values to java.lang.Double.
+                cfw.add(ByteCode.NEW, "java/lang/Double");
+                cfw.add(ByteCode.DUP);
+                String typeName = paramType.getName();
+                switch (typeName.charAt(0)) {
+                case 'b':
+                case 's':
+                case 'i':
+                    // load an int value, convert to double.
+                    cfw.add(ByteCode.ILOAD, paramOffset++);
+                    cfw.add(ByteCode.I2D);
+                    break;
+                case 'l':
+                    // load a long, convert to double.
+                    cfw.add(ByteCode.LLOAD, paramOffset);
+                    cfw.add(ByteCode.L2D);
+                    paramOffset += 2;
+                    break;
+                case 'f':
+                    // load a float, convert to double.
+                    cfw.add(ByteCode.FLOAD, paramOffset++);
+                    cfw.add(ByteCode.F2D);
+                    break;
+                case 'd':
+                    cfw.add(ByteCode.DLOAD, paramOffset);
+                    paramOffset += 2;
+                    break;
+                }
+                cfw.add(ByteCode.INVOKESPECIAL, "java/lang/Double", 
+                        "<init>", "(D)", "V");
+            }
+        return paramOffset;
+    }
+
+    /**
+     * Generates code to convert a wrapped value type to a primitive type.
+     * Handles unwrapping java.lang.Boolean, and java.lang.Number types.
+     * May need to map between char and java.lang.String as well.
+     * Generates the appropriate RETURN bytecode.
+     */
+    private static void generateReturnResult(ClassFileWriter cfw, 
+                                             Class retType) 
+    {
+        // wrap boolean values with java.lang.Boolean, convert all other 
+        // primitive values to java.lang.Double.
+        if (retType.equals(Boolean.TYPE)) {
+            cfw.add(ByteCode.INVOKESTATIC, 
+                    "org/mozilla/javascript/Context", 
+                    "toBoolean", "(Ljava/lang/Object;)", 
+                    "Z");
+            cfw.add(ByteCode.IRETURN);
+        } else if (retType.equals(Character.TYPE)) {
+                // characters are represented as strings in JavaScript. 
+                // return the first character.
+                // first convert the value to a string if possible.
+                cfw.add(ByteCode.INVOKESTATIC, 
+                        "org/mozilla/javascript/Context", 
+                        "toString", "(Ljava/lang/Object;)", 
+                        "Ljava/lang/String;");
+                cfw.add(ByteCode.ICONST_0);
+                cfw.add(ByteCode.INVOKEVIRTUAL, "java/lang/String", "charAt", 
+                        "(I)", "C");
+                cfw.add(ByteCode.IRETURN);
+        } else if (retType.isPrimitive()) {
+            cfw.add(ByteCode.INVOKESTATIC, 
+                    "org/mozilla/javascript/Context", 
+                    "toNumber", "(Ljava/lang/Object;)", 
+                    "D");
+            String typeName = retType.getName();
+            switch (typeName.charAt(0)) {
+            case 'b':
+            case 's':
+            case 'i':
+                cfw.add(ByteCode.D2I);
+                cfw.add(ByteCode.IRETURN);
+                break;
+            case 'l':
+                cfw.add(ByteCode.D2L);
+                cfw.add(ByteCode.LRETURN);
+                break;
+            case 'f':
+                cfw.add(ByteCode.D2F);
+                cfw.add(ByteCode.FRETURN);
+                break;
+            case 'd':
+                cfw.add(ByteCode.DRETURN);
+                break;
+            default:
+                throw new RuntimeException("Unexpected return type " + 
+                                           retType.toString());
+            }
+        } else {
+            String retTypeStr = retType.getName();
+            cfw.addLoadConstant(retTypeStr);
+            cfw.add(ByteCode.INVOKESTATIC, 
+                    "org/mozilla/javascript/JavaAdapter", 
+                    "convertResult",
+                    "(Ljava/lang/Object;" +
+                    "Ljava/lang/String;)", 
+                    "Ljava/lang/Object;");
+            // Now cast to return type
+            cfw.add(ByteCode.CHECKCAST, retTypeStr.replace('.', '/'));
+            cfw.add(ByteCode.ARETURN);
+        }
+    }
+
+    private static void generateMethod(ClassFileWriter cfw, String genName, 
+                                       String methodName, Class[] parms,
+                                       Class returnType) 
+    {
+        StringBuffer sb = new StringBuffer();
+        sb.append('(');
+        short arrayLocal = 1;	// includes this.
+        for (int i = 0; i < parms.length; i++) {
+            Class type = parms[i];
+            appendTypeString(sb, type);
+            if (type.equals(Long.TYPE) || type.equals(Double.TYPE))
+                arrayLocal += 2;
+            else
+                arrayLocal += 1;
+        }
+        sb.append(')');
+        appendTypeString(sb, returnType);
+        String methodSignature = sb.toString();
+        // System.out.println("generating " + m.getName() + methodSignature);
+        // System.out.flush();
+        cfw.startMethod(methodName, methodSignature, 
+                        ClassFileWriter.ACC_PUBLIC);
+        cfw.add(ByteCode.BIPUSH, (byte) parms.length);  // > 255 parms?
+        cfw.add(ByteCode.ANEWARRAY, "java/lang/Object");
+        cfw.add(ByteCode.ASTORE, arrayLocal);
+        
+        // allocate a local variable to store the scope used to wrap native objects.
+        short scopeLocal = (short) (arrayLocal + 1);
+        boolean loadedScope = false;
+
+        int paramOffset = 1;
+        for (int i = 0; i < parms.length; i++) {
+            cfw.add(ByteCode.ALOAD, arrayLocal);
+            cfw.add(ByteCode.BIPUSH, i);
+            if (parms[i].isPrimitive()) {
+                paramOffset = generateWrapParam(cfw, paramOffset, parms[i]);
+            } else {
+                // An arbitary Java object; call Context.toObject to wrap in 
+                // a Scriptable object
+                cfw.add(ByteCode.ALOAD, paramOffset++);
+                if (! loadedScope) {
+                    // load this.self into a local the first time it's needed.
+                    // it will provide the scope needed by Context.toObject().
+                    cfw.add(ByteCode.ALOAD_0);
+                    cfw.add(ByteCode.GETFIELD, genName, "self", 
+                            "Lorg/mozilla/javascript/Scriptable;");
+                    cfw.add(ByteCode.ASTORE, scopeLocal);
+                    loadedScope = true;
+                }
+                cfw.add(ByteCode.ALOAD, scopeLocal);
+
+                // Get argument Class 
+                cfw.addLoadConstant(parms[i].getName());
+                cfw.add(ByteCode.INVOKESTATIC, 
+                        "org/mozilla/javascript/ScriptRuntime", 
+                        "loadClassName", 
+                        "(Ljava/lang/String;)",                        
+                        "Ljava/lang/Class;");
+      
+                cfw.add(ByteCode.INVOKESTATIC, 
+                        "org/mozilla/javascript/JavaAdapter", 
+                        "toObject", 
+                        "(Ljava/lang/Object;" +
+                         "Lorg/mozilla/javascript/Scriptable;" +
+                         "Ljava/lang/Class;)",                         
+                        "Lorg/mozilla/javascript/Scriptable;");
+            }
+            cfw.add(ByteCode.AASTORE);
+        }
+        
+        cfw.add(ByteCode.ALOAD_0);  // this
+        cfw.add(ByteCode.GETFIELD, genName, "self", 
+                "Lorg/mozilla/javascript/Scriptable;");
+        
+        cfw.addLoadConstant(methodName);
+        cfw.add(ByteCode.ALOAD, arrayLocal);
+        
+        // go through utility method, which creates a Context to run the 
+        // method in.
+        cfw.add(ByteCode.INVOKESTATIC,
+                "org/mozilla/javascript/JavaAdapter",
+                "callMethod",
+                "(Lorg/mozilla/javascript/Scriptable;" +
+                 "Ljava/lang/String;[Ljava/lang/Object;)",
+                "Ljava/lang/Object;");
+
+        Class retType = returnType;
+        if (retType.equals(Void.TYPE)) {
+            cfw.add(ByteCode.POP);
+            cfw.add(ByteCode.RETURN);
+        } else {
+            generateReturnResult(cfw, retType);
+        }
+        cfw.stopMethod((short)(scopeLocal + 1), null);
+    }
+
+    /**
+     * Generates code to push typed parameters onto the operand stack
+     * prior to a direct Java method call.
+     */
+    private static int generatePushParam(ClassFileWriter cfw, int paramOffset, 
+                                         Class paramType) 
+    {
+        String typeName = paramType.getName();
+        switch (typeName.charAt(0)) {
+        case 'z':
+        case 'b':
+        case 'c':
+        case 's':
+        case 'i':
+            // load an int value, convert to double.
+            cfw.add(ByteCode.ILOAD, paramOffset++);
+            break;
+        case 'l':
+            // load a long, convert to double.
+            cfw.add(ByteCode.LLOAD, paramOffset);
+            paramOffset += 2;
+            break;
+        case 'f':
+            // load a float, convert to double.
+            cfw.add(ByteCode.FLOAD, paramOffset++);
+            break;
+        case 'd':
+            cfw.add(ByteCode.DLOAD, paramOffset);
+            paramOffset += 2;
+            break;
+        }
+        return paramOffset;
+    }
+
+    /**
+     * Generates code to return a Java type, after calling a Java method
+     * that returns the same type.
+     * Generates the appropriate RETURN bytecode.
+     */
+    private static void generatePopResult(ClassFileWriter cfw, 
+                                          Class retType) 
+    {
+        if (retType.isPrimitive()) {
+            String typeName = retType.getName();
+            switch (typeName.charAt(0)) {
+            case 'b':
+            case 'c':
+            case 's':
+            case 'i':
+            case 'z':
+                cfw.add(ByteCode.IRETURN);
+                break;
+            case 'l':
+                cfw.add(ByteCode.LRETURN);
+                break;
+            case 'f':
+                cfw.add(ByteCode.FRETURN);
+                break;
+            case 'd':
+                cfw.add(ByteCode.DRETURN);
+                break;
+            }
+        } else {
+            cfw.add(ByteCode.ARETURN);
+        }
+    }
+
+	/**
+	 * Generates a method called "super$methodName()" which can be called
+	 * from JavaScript that is equivalent to calling "super.methodName()"
+	 * from Java. Eventually, this may be supported directly in JavaScript.
+	 */
+    private static void generateSuper(ClassFileWriter cfw,
+                                      String genName, String superName,
+                                      String methodName, String methodSignature,
+                                      Class[] parms, Class returnType)
+    {
+        cfw.startMethod("super$" + methodName, methodSignature, 
+                        ClassFileWriter.ACC_PUBLIC);
+        
+		// push "this"
+        cfw.add(ByteCode.ALOAD, 0);
+
+		// push the rest of the parameters.
+        int paramOffset = 1;
+        for (int i = 0; i < parms.length; i++) {
+            if (parms[i].isPrimitive()) {
+                paramOffset = generatePushParam(cfw, paramOffset, parms[i]);
+            } else {
+                cfw.add(ByteCode.ALOAD, paramOffset++);
+            }
+        }
+        
+        // split the method signature at the right parentheses.
+        int rightParen = methodSignature.indexOf(')');
+        
+        // call the superclass implementation of the method.
+        cfw.add(ByteCode.INVOKESPECIAL,
+                superName,
+                methodName,
+                methodSignature.substring(0, rightParen + 1),
+                methodSignature.substring(rightParen + 1));
+
+		// now, handle the return type appropriately.        
+        Class retType = returnType;
+        if (!retType.equals(Void.TYPE)) {
+            generatePopResult(cfw, retType);
+        } else {
+        	cfw.add(ByteCode.RETURN);
+        }
+        cfw.stopMethod((short)(paramOffset + 1), null);
+    }
+    
+    /**
+     * Returns a fully qualified method name concatenated with its signature.
+     */
+    private static String getMethodSignature(Method method) {
+        Class[] parms = method.getParameterTypes();
+        StringBuffer sb = new StringBuffer();
+        sb.append('(');
+        for (int i = 0; i < parms.length; i++) {
+            Class type = parms[i];
+            appendTypeString(sb, type);
+        }
+        sb.append(')');
+        appendTypeString(sb, method.getReturnType());
+        return sb.toString();
+    }
+    
+    private static StringBuffer appendTypeString(StringBuffer sb, Class type) 
+    {
+        while (type.isArray()) {
+            sb.append('[');
+            type = type.getComponentType();
+        }
+        if (type.isPrimitive()) {
+            if (type.equals(Boolean.TYPE)) {
+                sb.append('Z');
+            } else
+                if (type.equals(Long.TYPE)) {
+                    sb.append('J');
+                } else {
+                    String typeName = type.getName();
+                    sb.append(Character.toUpperCase(typeName.charAt(0)));
+                }
+        } else {
+            sb.append('L');
+            sb.append(type.getName().replace('.', '/'));
+            sb.append(';');
+        }
+        return sb;
+    }
+    
+    static final class MyClassLoader extends ClassLoader {
+        public Class defineClass(String name, byte data[]) {
+            return super.defineClass(name, data, 0, data.length);
+        }
+
+        protected Class loadClass(String name, boolean resolve)
+            throws ClassNotFoundException
+        {
+            Class clazz = findLoadedClass(name);
+            if (clazz == null) {
+                ClassLoader loader = getClass().getClassLoader();
+                try {
+                    if (loader != null)
+                        return loader.loadClass(name);
+                    clazz = findSystemClass(name);
+                } catch (ClassNotFoundException e) {
+                    return ScriptRuntime.loadClassName(name);
+                }
+            }
+            if (resolve)
+                resolveClass(clazz);
+            return clazz;
+        }
+    }
+
+	/**
+	 * Provides a key with which to distinguish previously generated
+	 * adapter classes stored in a hash table.
+	 */
+    static class ClassSignature {
+    	Class mSuperClass;
+    	Class[] mInterfaces;
+    	Object[] mProperties;
+    
+    	ClassSignature(Class superClass, Class[] interfaces, Scriptable jsObj) {
+    		mSuperClass = superClass;
+    		mInterfaces = interfaces;
+    		mProperties = jsObj.getIds();
+	    }
+	    
+	    public boolean equals(Object obj) {
+	    	if (obj instanceof ClassSignature) {
+	    		ClassSignature sig = (ClassSignature) obj;
+	    		if (mSuperClass == sig.mSuperClass) {
+    				Class[] interfaces = sig.mInterfaces;
+	    			if (mInterfaces != interfaces) {
+	    				if (mInterfaces == null || interfaces == null)
+	    					return false;
+	    				if (mInterfaces.length != interfaces.length)
+	    					return false;
+	    				for (int i = 0; i < interfaces.length; i++)
+	    					if (mInterfaces[i] != interfaces[i])
+	    						return false;
+	    			}
+	    			Object[] properties = sig.mProperties;
+	    			if (mProperties.length != properties.length)
+	    				return false;
+	    			for (int i = 0; i < properties.length; i++)
+	    				if (!mProperties[i].equals(properties[i]))
+	    					return false;
+	    			return true;
+	    		}
+	    	}
+	    	return false;
+	    }
+	    
+	    public int hashCode() {
+	    	return mSuperClass.hashCode();
+	    }
+	}
+    
+    private static int serial;
+    private static MyClassLoader classLoader;
+    private static Hashtable generatedClasses = new Hashtable(7);
+}

mozilla/js/rhino/org/mozilla/javascript/JavaMembers.java

@@ -0,0 +1,595 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-2000 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ * Frank Mitchell
+ * Mike Shaver
+ * Kurt Westerfeld
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+import java.lang.reflect.*;
+import java.util.Hashtable;
+import java.util.Enumeration;
+
+/**
+ *
+ * @author Mike Shaver
+ * @author Norris Boyd
+ * @see NativeJavaObject
+ * @see NativeJavaClass
+ */
+class JavaMembers {
+
+    JavaMembers(Scriptable scope, Class cl) {
+        this.members = new Hashtable(23);
+        this.staticMembers = new Hashtable(7);
+        this.cl = cl;
+        reflect(scope, cl);
+    }
+
+    boolean has(String name, boolean isStatic) {
+        Hashtable ht = isStatic ? staticMembers : members;
+        Object obj = ht.get(name);
+        if (obj != null) {
+            return true;
+        } else {
+            Member member = this.findExplicitFunction(name, isStatic);
+            return member != null;
+        }
+    }
+
+    Object get(Scriptable scope, String name, Object javaObject,
+               boolean isStatic)
+    {
+        Hashtable ht = isStatic ? staticMembers : members;
+        Object member = ht.get(name);
+        if (!isStatic && member == null) {
+            // Try to get static member from instance (LC3)
+            member = staticMembers.get(name);
+        }
+        if (member == null) {
+            member = this.getExplicitFunction(scope, name, 
+                                              javaObject, isStatic);
+            if (member == null)
+                return Scriptable.NOT_FOUND;
+        }
+        if (member instanceof Scriptable)
+            return member;      // why is this here?
+        Object rval;
+        Class type;
+        try {
+            if (member instanceof BeanProperty) {
+                BeanProperty bp = (BeanProperty) member;
+                rval = bp.getter.invoke(javaObject, ScriptRuntime.emptyArgs);
+                type = bp.getter.getReturnType();
+            } else {
+                Field field = (Field) member;
+                rval = field.get(isStatic ? null : javaObject);
+                type = field.getType();
+            }
+        } catch (IllegalAccessException accEx) {
+            throw new RuntimeException("unexpected IllegalAccessException "+
+                                       "accessing Java field");
+        } catch (InvocationTargetException e) {
+            throw new WrappedException(e.getTargetException());
+        }
+        // Need to wrap the object before we return it.
+        scope = ScriptableObject.getTopLevelScope(scope);
+        return NativeJavaObject.wrap(scope, rval, type);
+    }
+
+    Member findExplicitFunction(String name, boolean isStatic) {
+        Hashtable ht = isStatic ? staticMembers : members;
+        int sigStart = name.indexOf('(');
+        Member[] methodsOrCtors = null;
+        NativeJavaMethod method = null;
+        boolean isCtor = (isStatic && sigStart == 0);
+
+        if (isCtor) {
+            // Explicit request for an overloaded constructor
+            methodsOrCtors = ctors;
+        }
+        else if (sigStart > 0) {
+            // Explicit request for an overloaded method
+            String trueName = name.substring(0,sigStart);
+            Object obj = ht.get(trueName);
+            if (!isStatic && obj == null) {
+                // Try to get static member from instance (LC3)
+                obj = staticMembers.get(trueName);
+            }
+            if (obj != null && obj instanceof NativeJavaMethod) {
+                method = (NativeJavaMethod)obj;
+                methodsOrCtors = method.getMethods();
+            }
+        }
+
+        if (methodsOrCtors != null) {
+            for (int i = 0; i < methodsOrCtors.length; i++) {
+                String nameWithSig = 
+                    NativeJavaMethod.signature(methodsOrCtors[i]);
+                if (name.equals(nameWithSig)) {
+                    return methodsOrCtors[i];
+                }
+            }
+        }
+
+        return null;
+    }
+
+    Object getExplicitFunction(Scriptable scope, String name, 
+                               Object javaObject, boolean isStatic) 
+    {
+        Hashtable ht = isStatic ? staticMembers : members;
+        Object member = null;
+        Member methodOrCtor = this.findExplicitFunction(name, isStatic);
+
+        if (methodOrCtor != null) {
+            Scriptable prototype = 
+                ScriptableObject.getFunctionPrototype(scope);
+
+            if (methodOrCtor instanceof Constructor) {
+                NativeJavaConstructor fun = 
+                    new NativeJavaConstructor((Constructor)methodOrCtor);
+                fun.setPrototype(prototype);
+                member = fun;
+                ht.put(name, fun);
+            } else {
+                String trueName = methodOrCtor.getName();
+                member = ht.get(trueName);
+
+                if (member instanceof NativeJavaMethod &&
+                    ((NativeJavaMethod)member).getMethods().length > 1 ) {
+                    NativeJavaMethod fun = 
+                        new NativeJavaMethod((Method)methodOrCtor, name);
+                    fun.setPrototype(prototype);
+                    ht.put(name, fun);
+                    member = fun;
+                }
+            }
+        }
+
+        return member;
+    }
+
+
+    public void put(String name, Object javaObject, Object value,
+                    boolean isStatic)
+    {
+        Hashtable ht = isStatic ? staticMembers : members;
+        Object member = ht.get(name);
+        if (!isStatic && member == null) {
+            // Try to get static member from instance (LC3)
+            member = staticMembers.get(name);
+        }
+        if (member == null)
+            throw reportMemberNotFound(name);
+        if (member instanceof FieldAndMethods) {
+            FieldAndMethods fam = (FieldAndMethods) ht.get(name);
+            member = fam.getField();
+        }
+        
+        // Is this a bean property "set"?
+        if (member instanceof BeanProperty) { 
+            try {
+                Method method = ((BeanProperty) member).setter;
+                if (method == null)
+                    throw reportMemberNotFound(name);
+                Class[] types = method.getParameterTypes();
+                Object[] params = { NativeJavaObject.coerceType(types[0], value) };
+                method.invoke(javaObject, params);
+            } catch (IllegalAccessException accessEx) {
+                throw new RuntimeException("unexpected IllegalAccessException " +
+                                           "accessing Java field");
+            } catch (InvocationTargetException e) {
+                throw new WrappedException(e.getTargetException());
+            }
+        }
+        else {
+            Field field = null;
+            try {
+                field = (Field) member;
+                if (field == null) {
+                    Object[] args = {name};
+                    throw Context.reportRuntimeError(
+                        Context.getMessage("msg.java.internal.private", args));
+                }
+                field.set(javaObject, NativeJavaObject.coerceType(field.getType(),
+                                                                  value));
+            } catch (ClassCastException e) {
+                Object errArgs[] = { name };
+                throw Context.reportRuntimeError(Context.getMessage
+                                              ("msg.java.method.assign",
+                                              errArgs));
+            } catch (IllegalAccessException accessEx) {
+                throw new RuntimeException("unexpected IllegalAccessException "+
+                                           "accessing Java field");
+            } catch (IllegalArgumentException argEx) {
+                Object errArgs[] = { value.getClass().getName(), field,
+                                     javaObject.getClass().getName() };
+                throw Context.reportRuntimeError(Context.getMessage(
+                    "msg.java.internal.field.type", errArgs));
+            }
+        }
+    }
+
+    Object[] getIds(boolean isStatic) {
+        Hashtable ht = isStatic ? staticMembers : members;
+        int len = ht.size();
+        Object[] result = new Object[len];
+        Enumeration keys = ht.keys();
+        for (int i=0; i < len; i++)
+            result[i] = keys.nextElement();
+        return result;
+    }
+    
+    Class getReflectedClass() {
+        return cl;
+    }
+    
+    void reflectField(Scriptable scope, Field field) {
+        int mods = field.getModifiers();
+        if (!Modifier.isPublic(mods))
+            return;
+        boolean isStatic = Modifier.isStatic(mods);
+        Hashtable ht = isStatic ? staticMembers : members;
+        String name = field.getName();
+        Object member = ht.get(name);
+        if (member != null) {
+            if (member instanceof NativeJavaMethod) {
+                NativeJavaMethod method = (NativeJavaMethod) member;
+                FieldAndMethods fam = new FieldAndMethods(method.getMethods(),
+                                                          field,
+                                                          null);
+                fam.setPrototype(ScriptableObject.getFunctionPrototype(scope));
+                getFieldAndMethodsTable(isStatic).put(name, fam);
+                ht.put(name, fam);
+                return;
+            }
+            if (member instanceof Field) {
+            	Field oldField = (Field) member;
+            	// If this newly reflected field shadows an inherited field, 
+                // then replace it. Otherwise, since access to the field 
+                // would be ambiguous from Java, no field should be reflected.
+            	// For now, the first field found wins, unless another field 
+                // explicitly shadows it.
+            	if (oldField.getDeclaringClass().isAssignableFrom(field.getDeclaringClass()))
+            		ht.put(name, field);
+            	return;
+            }
+            throw new RuntimeException("unknown member type");
+        }
+        ht.put(name, field);
+    }
+
+    void reflectMethod(Scriptable scope, Method method) {
+        int mods = method.getModifiers();
+        if (!Modifier.isPublic(mods))
+            return;
+        boolean isStatic = Modifier.isStatic(mods);
+        Hashtable ht = isStatic ? staticMembers : members;
+        String name = method.getName();
+        NativeJavaMethod fun = (NativeJavaMethod) ht.get(name);
+        if (fun == null) {
+            fun = new NativeJavaMethod();
+            if (scope != null)
+                fun.setPrototype(ScriptableObject.getFunctionPrototype(scope));
+            ht.put(name, fun);
+            fun.add(method);
+        } else {
+            fun.add(method);
+        }
+    }
+
+    void reflect(Scriptable scope, Class cl) {
+        // We reflect methods first, because we want overloaded field/method
+        // names to be allocated to the NativeJavaMethod before the field
+        // gets in the way.
+        Method[] methods = cl.getMethods();
+        for (int i = 0; i < methods.length; i++)
+            reflectMethod(scope, methods[i]);
+        
+        Field[] fields = cl.getFields();
+        for (int i = 0; i < fields.length; i++)
+            reflectField(scope, fields[i]);
+
+        makeBeanProperties(scope, false);
+        makeBeanProperties(scope, true);
+        
+        ctors = cl.getConstructors();
+    }
+    
+    Hashtable getFieldAndMethodsTable(boolean isStatic) {
+        Hashtable fmht = isStatic ? staticFieldAndMethods
+                                  : fieldAndMethods;
+        if (fmht == null) {
+            fmht = new Hashtable(11);
+            if (isStatic)
+                staticFieldAndMethods = fmht;
+            else
+                fieldAndMethods = fmht;
+        }
+        
+        return fmht;
+    }
+
+    void makeBeanProperties(Scriptable scope, boolean isStatic) {
+        Hashtable ht = isStatic ? staticMembers : members;
+        Hashtable toAdd = new Hashtable();
+        
+        // Now, For each member, make "bean" properties.
+        for (Enumeration e = ht.keys(); e.hasMoreElements(); ) {
+            
+            // Is this a getter?
+            String name = (String) e.nextElement();
+            boolean memberIsGetMethod = name.startsWith("get");
+            boolean memberIsIsMethod = name.startsWith("is");
+            if (memberIsGetMethod || memberIsIsMethod) {
+                // Double check name component.
+                String nameComponent = name.substring(memberIsGetMethod ? 3 : 2);
+                if (nameComponent.length() == 0) 
+                    continue;
+                
+                // Make the bean property name.
+                String beanPropertyName = nameComponent;
+                if (nameComponent.length() > 1 && 
+                    Character.isUpperCase(nameComponent.charAt(0)) && 
+                    !Character.isUpperCase(nameComponent.charAt(1)))
+                {
+                   beanPropertyName = Character.toLowerCase(nameComponent.charAt(0)) + 
+                                      nameComponent.substring(1);
+                }
+                
+                // If we already have a member by this name, don't do this
+                // property.
+                if (ht.containsKey(beanPropertyName))
+                    continue;
+                
+                // Get the method by this name.
+                Object method = ht.get(name);
+                if (!(method instanceof NativeJavaMethod))
+                    continue;
+                NativeJavaMethod getJavaMethod = (NativeJavaMethod) method;
+                
+                // Grab and inspect the getter method; does it have an empty parameter list,
+                // with a return value (eg. a getSomething() or isSomething())?
+                Class[] params;
+                Method[] getMethods = getJavaMethod.getMethods();
+                Class type;
+                if (getMethods != null && 
+                    getMethods.length == 1 && 
+                    (type = getMethods[0].getReturnType()) != null &&
+                    (params = getMethods[0].getParameterTypes()) != null && 
+                    params.length == 0) 
+                { 
+                    
+                    // Make sure the method static-ness is preserved for this property.
+                    if (isStatic && !Modifier.isStatic(getMethods[0].getModifiers()))
+                        continue;
+                        
+                    // We have a getter.  Now, do we have a setter?
+                    Method setMethod = null;
+                    String setter = "set" + nameComponent;
+                    if (ht.containsKey(setter)) { 
+
+                        // Is this value a method?
+                        method = ht.get(setter);
+                        if (method instanceof NativeJavaMethod) {
+                        
+                            //
+                            // Note: it may be preferable to allow NativeJavaMethod.findFunction()
+                            //       to find the appropriate setter; unfortunately, it requires an
+                            //       instance of the target arg to determine that.
+                            //
+
+                            // Make two passes: one to find a method with direct type assignment, 
+                            // and one to find a widening conversion.
+                            NativeJavaMethod setJavaMethod = (NativeJavaMethod) method;
+                            Method[] setMethods = setJavaMethod.getMethods();
+                            for (int pass = 1; pass <= 2 && setMethod == null; ++pass) {
+                                for (int i = 0; i < setMethods.length; ++i) {
+                                    if (setMethods[i].getReturnType() == void.class &&
+                                        (!isStatic || Modifier.isStatic(setMethods[i].getModifiers())) &&
+                                        (params = setMethods[i].getParameterTypes()) != null && 
+                                        params.length == 1 ) { 
+                                        
+                                        if ((pass == 1 && params[0] == type) ||
+                                            (pass == 2 && params[0].isAssignableFrom(type))) { 
+                                            setMethod = setMethods[i];
+                                            break;
+                                        }
+                                    }
+                                }
+                            }
+                        }
+                    }
+                            
+                    // Make the property.
+                    BeanProperty bp = new BeanProperty(getMethods[0], setMethod);
+                    toAdd.put(beanPropertyName, bp);
+                }
+            }
+        }           
+        
+        // Add the new bean properties.
+        for (Enumeration e = toAdd.keys(); e.hasMoreElements();) {
+            String key = (String) e.nextElement();
+            Object value = toAdd.get(key);
+            ht.put(key, value);
+        }
+    }
+
+    Hashtable getFieldAndMethodsObjects(Scriptable scope, Object javaObject,
+                                        boolean isStatic) 
+    {
+        Hashtable ht = isStatic ? staticFieldAndMethods : fieldAndMethods;
+        if (ht == null)
+            return null;
+        int len = ht.size();
+        Hashtable result = new Hashtable(Math.max(len,1));
+        Enumeration e = ht.elements();
+        while (len-- > 0) {
+            FieldAndMethods fam = (FieldAndMethods) e.nextElement();
+            fam = (FieldAndMethods) fam.clone();
+            fam.setJavaObject(javaObject);
+            result.put(fam.getName(), fam);
+        }
+        return result;
+    }
+
+    Constructor[] getConstructors() {
+        return ctors;
+    }
+
+    static JavaMembers lookupClass(Scriptable scope, Class dynamicType,
+                                   Class staticType)
+    {
+        Class cl = dynamicType;
+        Hashtable ct = classTable;  // use local reference to avoid synchronize
+        JavaMembers members = (JavaMembers) ct.get(cl);
+        if (members != null)
+            return members;
+        if (staticType != null && staticType != dynamicType &&
+            !Modifier.isPublic(dynamicType.getModifiers()) &&
+            Modifier.isPublic(staticType.getModifiers()))
+        {
+            cl = staticType;
+            
+            // We can use the static type, and that is OK, but we'll trace
+            // back the java class chain here to look for something more suitable.
+            for (Class parentType = dynamicType; 
+                 parentType != null && parentType != ScriptRuntime.ObjectClass;
+                 parentType = parentType.getSuperclass())
+            {
+                if (Modifier.isPublic(parentType.getModifiers())) {
+                   cl = parentType;
+                   break;
+                }
+            }
+        }
+        try {
+            members = new JavaMembers(scope, cl);
+        } catch (SecurityException e) {
+            // Reflection may fail for objects that are in a restricted 
+            // access package (e.g. sun.*).  If we get a security
+            // exception, try again with the static type. Otherwise, 
+            // rethrow the exception.
+            if (cl != staticType)
+                members = new JavaMembers(scope, staticType);
+            else
+                throw e;
+        }
+        if (Context.isCachingEnabled) 
+            ct.put(cl, members);
+        return members;
+    }
+
+    RuntimeException reportMemberNotFound(String memberName) {
+        Object errArgs[] = { cl.getName(), 
+                             memberName };
+        return Context.reportRuntimeError(
+            Context.getMessage("msg.java.member.not.found",
+                               errArgs));
+    }
+
+    static Hashtable classTable = new Hashtable();
+
+    private Class cl;
+    private Hashtable members;
+    private Hashtable fieldAndMethods;
+    private Hashtable staticMembers;
+    private Hashtable staticFieldAndMethods;
+    private Constructor[] ctors;
+}
+
+class BeanProperty {
+    BeanProperty(Method getter, Method setter) {
+        this.getter = getter;
+        this.setter = setter;
+    }
+    Method getter;
+    Method setter;
+}
+
+class FieldAndMethods extends NativeJavaMethod {
+
+    FieldAndMethods(Method[] methods, Field field, String name) {
+        super(methods);
+        this.field = field;
+        this.name = name;
+    }
+
+    void setJavaObject(Object javaObject) {
+        this.javaObject = javaObject;
+    }
+
+    String getName() {
+        if (field == null)
+            return name;
+        return field.getName();
+    }
+
+    Field getField() {
+        return field;
+    }
+    
+    public Object getDefaultValue(Class hint) {
+        if (hint == ScriptRuntime.FunctionClass)
+            return this;
+        Object rval;
+        Class type;
+        try {
+            rval = field.get(javaObject);
+            type = field.getType();
+        } catch (IllegalAccessException accEx) {
+            Object[] args = {getName()};
+            throw Context.reportRuntimeError(Context.getMessage
+                                          ("msg.java.internal.private", args));
+        }
+        rval = NativeJavaObject.wrap(this, rval, type);
+        if (rval instanceof Scriptable) {
+            rval = ((Scriptable) rval).getDefaultValue(hint);
+        }
+        return rval;
+    }
+
+    public Object clone() {
+        FieldAndMethods result = new FieldAndMethods(methods, field, name);
+        result.javaObject = javaObject;
+        return result;
+    }
+    
+    private Field field;
+    private Object javaObject;
+    private String name;
+}

mozilla/js/rhino/org/mozilla/javascript/JavaScriptException.java

@@ -0,0 +1,109 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+// API class
+
+package org.mozilla.javascript;
+
+import java.lang.reflect.InvocationTargetException;
+
+/**
+ * Java reflection of JavaScript exceptions.  (Possibly wrapping a Java exception.)
+ *
+ * @author Mike McCabe
+ */
+public class JavaScriptException extends Exception {
+
+    /**
+     * Create a JavaScript exception wrapping the given JavaScript value.
+     *
+     * Instances of this class are thrown by the JavaScript 'throw' keyword.
+     *
+     * @param value the JavaScript value thrown.
+     */
+    public JavaScriptException(Object value) {
+        super(ScriptRuntime.toString(value));
+        this.value = value;
+    }
+
+    /**
+     * Get the exception message.
+     *
+     * <p>Will just convert the wrapped exception to a string.
+     */
+    public String getMessage() {
+        return ScriptRuntime.toString(value);
+    }
+
+    static JavaScriptException wrapException(Scriptable scope,
+                                             Throwable exn)
+    {
+        if (exn instanceof InvocationTargetException)
+            exn = ((InvocationTargetException)exn).getTargetException();
+        if (exn instanceof JavaScriptException)
+            return (JavaScriptException)exn;
+        Object wrapper = NativeJavaObject.wrap(scope, exn, Throwable.class);
+        return new JavaScriptException(wrapper);
+    }
+
+    /**
+     * Get the exception value originally thrown.  This may be a
+     * JavaScript value (null, undefined, Boolean, Number, String,
+     * Scriptable or Function) or a Java exception value thrown from a
+     * host object or from Java called through LiveConnect.
+     *
+     * @return the value wrapped by this exception
+     */
+    public Object getValue() {
+        if (value != null && value instanceof Wrapper)
+            // this will also catch NativeStrings...
+            return ((Wrapper)value).unwrap();
+        else
+            return value;
+    }
+
+    /**
+     * The JavaScript exception value.  This value is not
+     * intended for general use; if the JavaScriptException wraps a
+     * Java exception, getScriptableValue may return a Scriptable
+     * wrapping the original Java exception object.
+     *
+     * We would prefer to go through a getter to encapsulate the value,
+     * however that causes the bizarre error "nanosecond timeout value 
+     * out of range" on the MS JVM. 
+     * @serial 
+     */
+    Object value;
+}

mozilla/js/rhino/org/mozilla/javascript/Label.java

@@ -0,0 +1,104 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Roger Lawrence
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+public class Label {
+    
+    private static final int FIXUPTABLE_SIZE = 8;
+
+    private static final boolean DEBUG = true;
+
+    public Label()
+    {
+        itsPC = -1;
+    }
+
+    public short getPC()
+    {
+        return itsPC;
+    }
+    
+    public void fixGotos(byte theCodeBuffer[])
+    {
+        if (DEBUG) {
+            if ((itsPC == -1) && (itsFixupTable != null))
+                throw new RuntimeException("Unlocated label");
+        }
+        if (itsFixupTable != null) {
+            for (int i = 0; i < itsFixupTableTop; i++) {
+                int fixupSite = itsFixupTable[i];
+                // -1 to get delta from instruction start
+                short offset = (short)(itsPC - (fixupSite - 1));
+                theCodeBuffer[fixupSite++] = (byte)(offset >> 8);
+                theCodeBuffer[fixupSite] = (byte)offset;
+            }
+        }
+        itsFixupTable = null;
+    }
+
+    public void setPC(short thePC)
+    {
+        if (DEBUG) {
+            if ((itsPC != -1) && (itsPC != thePC))
+                throw new RuntimeException("Duplicate label");
+        }
+        itsPC = thePC;
+    }
+
+    public void addFixup(int fixupSite)
+    {
+        if (itsFixupTable == null) {
+            itsFixupTableTop = 1;
+            itsFixupTable = new int[FIXUPTABLE_SIZE];
+            itsFixupTable[0] = fixupSite;            
+        }
+        else {
+            if (itsFixupTableTop == itsFixupTable.length) {
+                int oldLength = itsFixupTable.length;
+                int newTable[] = new int[oldLength + FIXUPTABLE_SIZE];
+                System.arraycopy(itsFixupTable, 0, newTable, 0, oldLength);
+                itsFixupTable = newTable;
+            }
+            itsFixupTable[itsFixupTableTop++] = fixupSite;            
+        }
+    }
+
+    private short itsPC;
+    private int itsFixupTable[];
+    private int itsFixupTableTop;
+
+}
+

mozilla/js/rhino/org/mozilla/javascript/LabelTable.java

@@ -0,0 +1,80 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Roger Lawrence
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+public class LabelTable {
+
+    private static final boolean DEBUGLABELS = false;
+    
+    private static final int LabelTableSize = 32;
+    protected Label itsLabelTable[];
+    protected int itsLabelTableTop;
+
+    public int acquireLabel()
+    {
+        if (itsLabelTable == null) {
+            itsLabelTable = new Label[LabelTableSize];
+            itsLabelTable[0] = new Label();
+            itsLabelTableTop = 1;
+            return 0x80000000;
+        }
+        else {
+            if (itsLabelTableTop == itsLabelTable.length) {
+                Label oldTable[] = itsLabelTable;
+                itsLabelTable = new Label[itsLabelTableTop * 2];
+                System.arraycopy(oldTable, 0, itsLabelTable, 0, itsLabelTableTop);
+            }
+            itsLabelTable[itsLabelTableTop] = new Label();
+            int result = itsLabelTableTop++;
+            return result | 0x80000000;
+        }
+    }
+
+    public int markLabel(int theLabel, int pc)
+    {
+        if (DEBUGLABELS) {
+            if ((theLabel & 0x80000000) != 0x80000000)
+                throw new RuntimeException("Bad label, no biscuit");
+        }
+        theLabel &= 0x7FFFFFFF;
+        if (DEBUGLABELS) {
+            System.out.println("Marking label " + theLabel + " at " + pc);
+        }
+        itsLabelTable[theLabel].setPC((short)pc);
+        return theLabel | 0x80000000;
+    }
+
+}

mozilla/js/rhino/org/mozilla/javascript/LazilyLoadedCtor.java

@@ -0,0 +1,99 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-2000 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+import java.lang.reflect.*;
+
+/**
+ * Avoid loading classes unless they are used.
+ *
+ * <p> This improves startup time and average memory usage.
+ */
+class LazilyLoadedCtor {
+
+    LazilyLoadedCtor(ScriptableObject scope, String ctorName,
+                     String className, int attributes)
+        throws PropertyException
+    {
+        this.className = className;
+        this.ctorName = ctorName;
+        Class cl = getClass();
+        Method[] getter = FunctionObject.findMethods(cl, "getProperty");
+        Method[] setter = FunctionObject.findMethods(cl, "setProperty");
+        scope.defineProperty(this.ctorName, this, getter[0], setter[0],
+                             attributes);
+    }
+
+    public Object getProperty(ScriptableObject obj) {
+        try {
+            synchronized (obj) {
+                if (!isReplaced)
+                    ScriptableObject.defineClass(obj, Class.forName(className));
+                isReplaced = true;
+            }
+        }
+        catch (ClassNotFoundException e) {
+            throw WrappedException.wrapException(e);
+        }
+        catch (InstantiationException e) {
+            throw WrappedException.wrapException(e);
+        }
+        catch (IllegalAccessException e) {
+            throw WrappedException.wrapException(e);
+        }
+        catch (InvocationTargetException e) {
+            throw WrappedException.wrapException(e);
+        }
+        catch (ClassDefinitionException e) {
+            throw WrappedException.wrapException(e);
+        }
+        catch (PropertyException e) {
+            throw WrappedException.wrapException(e);
+        }
+        return obj.get(ctorName, obj);
+    }
+
+    public Object setProperty(ScriptableObject obj, Object val) {
+        synchronized (obj) {
+            isReplaced = true;
+            return val;
+        }
+    }
+
+    private String ctorName;
+    private String className;
+    private boolean isReplaced;
+}

mozilla/js/rhino/org/mozilla/javascript/LineBuffer.java

@@ -0,0 +1,412 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Mike McCabe
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+import java.io.Reader;
+import java.io.IOException;
+
+/**
+ * An input buffer that combines fast character-based access with
+ * (slower) support for retrieving the text of the current line.  It
+ * also supports building strings directly out of the internal buffer
+ * to support fast scanning with minimal object creation.
+ *
+ * Note that it is customized in several ways to support the
+ * TokenStream class, and should not be considered general.
+ *
+ * Credits to Kipp Hickman and John Bandhauer.
+ *
+ * @author Mike McCabe
+ */
+final class LineBuffer {
+    /*
+     * for smooth operation of getLine(), this should be greater than
+     * the length of any expected line.  Currently, 256 is 3% slower
+     * than 4096 for large compiles, but seems safer given evaluateString.
+     * Strings for the scanner are are built with StringBuffers
+     * instead of directly out of the buffer whenever a string crosses
+     * a buffer boundary, so small buffer sizes will mean that more
+     * objects are created.
+     */
+    static final int BUFLEN = 256;
+
+    LineBuffer(Reader in, int lineno) {
+        this.in = in;
+        this.lineno = lineno;
+    }
+
+    int read() throws IOException {
+		for(;;) {
+			if (end == offset && !fill())
+			    return -1;
+
+			// Do only a bitmask + branch per character, at the cost of
+			// three branches per low-bits-only (or 2028/9) character.
+            if ((buffer[offset] & '\udfd0') == 0) {
+			    if (buffer[offset] == '\r') {
+			        // if the next character is a newline, skip past it.
+			        if ((offset + 1) < end) {
+			            if (buffer[offset + 1] == '\n')
+			                offset++;
+			        } else {
+			            // set a flag for fill(), in case the first char of the
+			            // next fill is a newline.
+			            lastWasCR = true;
+			        }
+			    }
+                else 
+                    if ((buffer[offset] != '\n') 
+                        && (buffer[offset] != '\u2028')
+                        && (buffer[offset] != '\u2029'))
+                    { 
+                        if (Character.getType(buffer[offset])
+                                                    == Character.FORMAT) {
+				            hadCFSinceStringStart = true;
+				            offset++;
+                            continue;
+                        }
+                        return (int) buffer[offset++];
+			        }
+			    offset++;
+			    prevStart = lineStart;
+			    lineStart = offset;
+			    lineno++;
+			    return '\n';
+			}
+			if ((buffer[offset] >= 128) 
+				  && (Character.getType(buffer[offset]) == Character.FORMAT)) {
+				hadCFSinceStringStart = true;
+				offset++;
+			}
+			else
+				break;
+		}
+		
+        return (int) buffer[offset++];
+    }
+
+    void unread() {
+        if (offset == 0)
+            // We can get here when we're asked to unread() an
+            // implicit EOF_CHAR.
+            
+            // This would also be wrong behavior in the general case,
+            // because a peek() could map a buffer.length offset to 0
+            // in the process of a fill(), and leave it there.  But
+            // the scanner never calls peek() or a failed match()
+            // followed by unread()... this would violate 1-character
+            // lookahead.  So we're OK.
+            return;
+        offset--;
+        if ((buffer[offset] & '\ufff0') == 0
+            && (buffer[offset] == '\r' || buffer[offset] == '\n')) {
+            // back off from the line start we presumably just registered...
+            lineStart = prevStart;
+            lineno--;
+        }
+    }
+
+    int peek() throws IOException {
+        if (end == offset && !fill())
+            return -1;
+
+        if (buffer[offset] == '\r')
+            return '\n';
+
+        return buffer[offset];
+    }
+
+    boolean match(char c) throws IOException {
+        if (end == offset && !fill())
+            return false;
+
+        // This'd be a place where we'd need to map '\r' to '\n' and
+        // do other updates, but TokenStream never looks ahead for
+        // '\n', so we don't bother.
+        if (buffer[offset] == c) {
+            offset++;
+            return true;
+        }
+        return false;
+    }
+
+    // Reconstruct a source line from the buffers.  This can be slow...
+    String getLine() {
+        StringBuffer result = new StringBuffer();
+
+        int start = lineStart;
+        if (start >= offset) {
+            // the line begins somewhere in the other buffer; get that first.
+            if (otherStart < otherEnd)
+                // if a line ending was seen in the other buffer... otherwise
+                // just ignore this strange case.
+                result.append(otherBuffer, otherStart,
+                              otherEnd - otherStart);
+            start = 0;
+        }
+
+        // get the part of the line in the current buffer.
+        result.append(buffer, start, offset - start);
+
+        // Get the remainder of the line.
+        int i = offset;
+        while(true) {
+            if (i == buffer.length) {
+                // we're out of buffer, let's just expand it.  We do
+                // this instead of reading into a StringBuffer to
+                // preserve the stream for later reads.
+                char[] newBuffer = new char[buffer.length * 2];
+                System.arraycopy(buffer, 0, newBuffer, 0, buffer.length);
+                buffer = newBuffer;
+                int charsRead = 0;
+                try {
+                    charsRead = in.read(buffer, end, buffer.length - end);
+                } catch (IOException ioe) {
+                    // ignore it, we're already displaying an error...
+                }
+                if (charsRead < 0)
+                    break;
+                end += charsRead;
+            }
+            if (buffer[i] == '\r' || buffer[i] == '\n')
+                break;
+            i++;
+        }
+
+        result.append(buffer, offset, i - offset);
+        return result.toString();
+    }
+
+    // Get the offset of the current character, relative to
+    // the line that getLine() returns.
+    int getOffset() {
+        if (lineStart >= offset)
+            // The line begins somewhere in the other buffer.
+            return offset + (otherEnd - otherStart);
+        else
+            return offset - lineStart;
+    }
+
+    // Set a mark to indicate that the reader should begin
+    // accumulating characters for getString().  The string begins
+    // with the last character read.
+    void startString() {
+        if (offset == 0) {
+            // We can get here if startString is called after a peek()
+            // or failed match() with offset past the end of the
+            // buffer.
+
+            // We're at the beginning of the buffer, and the previous character
+            // (which we want to include) is at the end of the last one, so
+            // we just go to StringBuffer mode.
+            stringSoFar = new StringBuffer();
+			
+            stringSoFar.append(otherBuffer, otherEnd - 1, 1);
+
+            stringStart = -1; // Set sentinel value.
+			hadCFSinceStringStart = ((otherBuffer[otherEnd - 1] >= 128) 
+					&& Character.getType(otherBuffer[otherEnd - 1])
+													== Character.FORMAT);
+        } else {
+            // Support restarting strings
+            stringSoFar = null;
+            stringStart = offset - 1;
+			hadCFSinceStringStart = ((buffer[stringStart] >= 128) 
+					&& Character.getType(buffer[stringStart]) == Character.FORMAT);
+        }
+		
+    }
+
+    // Get a string consisting of the characters seen since the last
+    // startString.
+    String getString() {
+        String result;
+
+        /*
+         * There's one strange case here:  If the character offset currently
+         * points to (which we never want to include in the string) is
+         * a newline, then if the previous character is a carriage return,
+         * we probably want to exclude that as well.  If the offset is 0,
+         * then we hope that fill() handled excluding it from stringSoFar.
+         */
+        int loseCR = (offset > 0 &&
+                      buffer[offset] == '\n' && buffer[offset - 1] == '\r') ?
+            1 : 0;
+
+        if (stringStart != -1) {
+            // String mark is valid, and in this buffer.
+
+            result = new String(buffer, stringStart, 
+                                offset - stringStart - loseCR);
+        } else {
+            if (stringSoFar == null) 
+                stringSoFar = new StringBuffer();
+            // Exclude cr as well as nl of newline.  If offset is 0, then
+            // hopefully fill() did the right thing.
+            result = (stringSoFar.append(buffer, 0, offset - loseCR)).toString();
+        }
+        
+        stringStart = -1;
+        stringSoFar = null;
+		
+		if (hadCFSinceStringStart) {
+			char c[] = result.toCharArray();
+			StringBuffer x = null;
+			for (int i = 0; i < c.length; i++) {
+				if (Character.getType(c[i]) == Character.FORMAT) {
+					if (x == null) {
+						x = new StringBuffer();
+						x.append(c, 0, i);
+					}
+				}
+				else
+					if (x != null) x.append(c[i]);
+			}
+			if (x != null) result = x.toString();	
+		}
+		
+        return result;
+    }            
+
+    boolean fill() throws IOException {
+        // not sure I care...
+        if (end - offset != 0) 
+            throw new IOException("fill of non-empty buffer");
+
+        // If there's a string currently being accumulated, save
+        // off the progress.
+
+        /*
+         * Exclude an end-of-buffer carriage return.  NOTE this is not
+         * fully correct in the general case, because we really only
+         * want to exclude the carriage return if it's followed by a
+         * linefeed at the beginning of the next buffer.  But we fudge
+         * because the scanner doesn't do this.
+         */
+        int loseCR = (offset > 0 && lastWasCR) ? 1 : 0;
+
+        if (stringStart != -1) {
+            // The mark is in the current buffer, save off from the mark to the
+            // end.
+            stringSoFar = new StringBuffer();
+
+            stringSoFar.append(buffer, stringStart, end - stringStart - loseCR);
+            stringStart = -1;
+        } else if (stringSoFar != null) {
+            // the string began prior to the current buffer, so save the
+            // whole current buffer.
+            stringSoFar.append(buffer, 0, end - loseCR);
+        }
+
+        // swap buffers
+        char[] tempBuffer = buffer;
+        buffer = otherBuffer;
+        otherBuffer = tempBuffer;
+
+        // allocate the buffers lazily, in case we're handed a short string.
+        if (buffer == null) {
+            buffer = new char[BUFLEN];
+        }
+
+        // buffers have switched, so move the newline marker.
+        otherStart = lineStart;
+        otherEnd = end;
+
+        // set lineStart to a sentinel value, unless this is the first
+        // time around.
+        prevStart = lineStart = (otherBuffer == null) ? 0 : buffer.length + 1;
+        
+        offset = 0;
+        end = in.read(buffer, 0, buffer.length);
+        if (end < 0) {
+            end = 0;
+
+            // can't null buffers here, because a string might be retrieved
+            // out of the other buffer, and a 0-length string might be
+            // retrieved out of this one.
+
+            hitEOF = true;
+            return false;
+        }
+
+        // If the last character of the previous fill was a carriage return,
+        // then ignore a newline.
+
+        // There's another bizzare special case here.  If lastWasCR is
+        // true, and we see a newline, and the buffer length is
+        // 1... then we probably just read the last character of the
+        // file, and returning after advancing offset is not the right
+        // thing to do.  Instead, we try to ignore the newline (and
+        // likely get to EOF for real) by doing yet another fill().
+        if (lastWasCR) {
+            if (buffer[0] == '\n') {
+              offset++;
+              if (end == 1)
+                  return fill();
+            }
+            lineStart = offset;
+            lastWasCR = false;
+        }
+        return true;
+    }
+
+    int getLineno() { return lineno; }
+    boolean eof() { return hitEOF; }
+    
+    private Reader in;
+    private char[] otherBuffer = null;
+    private char[] buffer = null;
+
+    // Yes, there are too too many of these.
+    private int offset = 0;
+    private int end = 0;
+    private int otherEnd;
+    private int lineno;
+
+    private int lineStart = 0;
+    private int otherStart = 0;
+    private int prevStart = 0;
+    
+    private boolean lastWasCR = false;
+    private boolean hitEOF = false;
+
+    private int stringStart = -1;
+    private StringBuffer stringSoFar = null;
+	private boolean hadCFSinceStringStart = false;
+
+}
+
+

mozilla/js/rhino/org/mozilla/javascript/ListenerCollection.java

@@ -0,0 +1,114 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is ListenerCollection, released
+ * May 15, 1998.
+ *
+ * The Initial Developer of the Original Code is Ian D. Stewart.
+ * Portions created by Ian D. Stewart are Copyright (C) 1998, 1999
+ * Ian D. Stewart.
+ * Rights Reserved.
+ *
+ * Contributor(s):
+ * Ian D. Stewart
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+
+/* This class provides a series of methods for accessing event listeners. */
+
+package org.mozilla.javascript;
+
+import java.util.Enumeration;
+import java.util.Vector;
+
+/**
+ * This class acts as central storage location for miscelanious 
+ * event listeners.  It provides methods for adding, removing
+ * and accessing listeners, both individually and collectively,
+ * by the listener interface implemented
+ *
+ * Note: This class performs the same functions as 
+ * javax.swing.event.EventListenerList, and is provided
+ * primarily for implementations lacking the Swing packages
+ *
+ * @author  Ian D. Stewart
+ * @since JavaScript-Java 1.4 rel 3
+ */
+public class ListenerCollection extends Vector {
+    /**
+     * Create a new ListenerCollection
+     */
+    public ListenerCollection() {
+        super();
+    } // Constructor
+
+    /**
+     * Add a new listener to the collection
+     * @param  listener  the listener
+     */
+    public void addListener(Object listener) {
+        this.addElement(listener);
+    }
+    
+    /**
+     * Remove a listener from the collection
+     * @param  listener  the listener
+     */
+    public void removeListener(Object listener) {
+        this.removeElement(listener);
+    }
+    
+    /**
+     * Returns an Enumeration of all the listeners 
+     * being stored in this collection
+     * @return an Enumeration of all listeners
+     */
+    public Enumeration getAllListeners() {
+        return this.elements();
+    }
+    
+    /**
+     * Return all the listeners in this collection which
+     * implement the specified interface
+     *
+     * @param  iface  the interface
+     * @return an array of listeners which implement the given
+     *     interface
+     */
+    public Object[] getListeners(Class iface) {
+        Vector array = new Vector();
+                
+        for(Enumeration enum = getAllListeners();enum.hasMoreElements();) {
+            Object listener = enum.nextElement();
+            if(iface.isInstance(listener)) {
+                array.addElement(listener);
+            }
+        }
+        Object[] result = new Object[array.size()];
+        array.copyInto(result);
+        return result;
+    }
+} // ListenerCollection
+
+// end of ListenerCollection.java ...
+

mozilla/js/rhino/org/mozilla/javascript/LocalVariable.java

@@ -0,0 +1,79 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Roger Lawrence
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+public class LocalVariable {
+    
+    public LocalVariable(String name, boolean isParameter) {
+        itsName = name;
+        itsIsParameter = isParameter; 
+    }
+    
+    public void setIndex(int index){ itsIndex = index; }
+    public int getIndex()          { return itsIndex; }
+        
+    public void setIsParameter()   { itsIsParameter = true; }
+    public boolean isParameter()   { return itsIsParameter; }
+            
+    public String getName()        { return itsName; }
+        
+    /**
+     * Return the starting PC where this variable is live, or -1
+     * if it is not a Java register.
+     */
+    public int getStartPC() {
+        return -1;
+    }
+
+    /**
+     * Return the Java register number or -1 if it is not a Java register.
+     */
+    public short getJRegister() {
+        return -1;
+    }
+
+    /**
+     * Return true if the local variable is a Java register with double type.
+     */
+    public boolean isNumber() {
+        return false;
+    }
+
+    private String itsName;
+    private int itsIndex = -1;
+    
+    private boolean itsIsParameter;
+}

mozilla/js/rhino/org/mozilla/javascript/Makefile

@@ -0,0 +1,244 @@
+#! gmake
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is Rhino code, released
+# May 6, 1998.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1999 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#
+# Alternatively, the contents of this file may be used under the
+# terms of the GNU Public License (the "GPL"), in which case the
+# provisions of the GPL are applicable instead of those above.
+# If you wish to allow use of your version of this file only
+# under the terms of the GPL and not to allow others to use your
+# version of this file under the NPL, indicate your decision by
+# deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL.  If you do not delete
+# the provisions above, a recipient may use your version of this
+# file under either the NPL or the GPL.
+
+#
+# Makefile the core javascript classes.
+#
+# This Makefile is intended to be called from the toplevel Makefile.
+#
+
+# List files explicitly to exclude .java files in this dir we don't want
+# to compile.  Also hack in classfile stuff...
+SOURCES =						\
+	$(PATH_PREFIX)/Arguments.java			\
+	$(PATH_PREFIX)/BinaryDigitReader.java		\
+	$(PATH_PREFIX)/ClassDefinitionException.java	\
+	$(PATH_PREFIX)/ClassNameHelper.java		\
+	$(PATH_PREFIX)/Context.java			\
+	$(PATH_PREFIX)/DeepBytecodeHook.java		\
+	$(PATH_PREFIX)/DeepCallHook.java		\
+	$(PATH_PREFIX)/DeepErrorReporterHook.java	\
+	$(PATH_PREFIX)/DeepExecuteHook.java		\
+	$(PATH_PREFIX)/DeepNewObjectHook.java		\
+	$(PATH_PREFIX)/DeepScriptHook.java		\
+	$(PATH_PREFIX)/DefaultErrorReporter.java	\
+	$(PATH_PREFIX)/EcmaError.java			\
+	$(PATH_PREFIX)/ErrorReporter.java		\
+	$(PATH_PREFIX)/EvaluatorException.java		\
+	$(PATH_PREFIX)/FlattenedObject.java		\
+	$(PATH_PREFIX)/Function.java			\
+	$(PATH_PREFIX)/FunctionNode.java		\
+	$(PATH_PREFIX)/FunctionObject.java		\
+	$(PATH_PREFIX)/IRFactory.java			\
+	$(PATH_PREFIX)/ImporterTopLevel.java		\
+	$(PATH_PREFIX)/InterpretedFunction.java		\
+	$(PATH_PREFIX)/InterpretedScript.java		\
+	$(PATH_PREFIX)/Interpreter.java			\
+	$(PATH_PREFIX)/InterpreterData.java		\
+	$(PATH_PREFIX)/JavaAdapter.java			\
+	$(PATH_PREFIX)/JavaMembers.java			\
+	$(PATH_PREFIX)/JavaScriptException.java		\
+	$(PATH_PREFIX)/Label.java			\
+	$(PATH_PREFIX)/LabelTable.java			\
+	$(PATH_PREFIX)/LazilyLoadedCtor.java		\
+	$(PATH_PREFIX)/LineBuffer.java			\
+	$(PATH_PREFIX)/ListenerCollection.java		\
+	$(PATH_PREFIX)/LocalVariable.java		\
+	$(PATH_PREFIX)/NativeArray.java			\
+	$(PATH_PREFIX)/NativeBoolean.java		\
+	$(PATH_PREFIX)/NativeCall.java			\
+	$(PATH_PREFIX)/NativeDate.java			\
+	$(PATH_PREFIX)/NativeError.java			\
+	$(PATH_PREFIX)/NativeFunction.java		\
+	$(PATH_PREFIX)/NativeGlobal.java		\
+	$(PATH_PREFIX)/NativeJavaArray.java		\
+	$(PATH_PREFIX)/NativeJavaClass.java		\
+	$(PATH_PREFIX)/NativeJavaConstructor.java	\
+	$(PATH_PREFIX)/NativeJavaMethod.java		\
+	$(PATH_PREFIX)/NativeJavaObject.java		\
+	$(PATH_PREFIX)/NativeJavaPackage.java		\
+	$(PATH_PREFIX)/NativeMath.java			\
+	$(PATH_PREFIX)/NativeNumber.java		\
+	$(PATH_PREFIX)/NativeObject.java		\
+	$(PATH_PREFIX)/NativeScript.java		\
+	$(PATH_PREFIX)/NativeString.java		\
+	$(PATH_PREFIX)/NativeWith.java			\
+	$(PATH_PREFIX)/Node.java			\
+	$(PATH_PREFIX)/NodeTransformer.java		\
+	$(PATH_PREFIX)/NotAFunctionException.java	\
+	$(PATH_PREFIX)/Parser.java			\
+	$(PATH_PREFIX)/PreorderNodeIterator.java	\
+	$(PATH_PREFIX)/PropertyException.java		\
+	$(PATH_PREFIX)/RegExpProxy.java			\
+	$(PATH_PREFIX)/Script.java			\
+	$(PATH_PREFIX)/ScriptRuntime.java		\
+	$(PATH_PREFIX)/Scriptable.java			\
+	$(PATH_PREFIX)/ScriptableObject.java		\
+	$(PATH_PREFIX)/SecuritySupport.java		\
+	$(PATH_PREFIX)/ShallowNodeIterator.java		\
+	$(PATH_PREFIX)/SourceTextItem.java		\
+	$(PATH_PREFIX)/SourceTextManager.java		\
+	$(PATH_PREFIX)/TokenStream.java			\
+	$(PATH_PREFIX)/Undefined.java			\
+	$(PATH_PREFIX)/VariableTable.java		\
+	$(PATH_PREFIX)/WrappedException.java		\
+	$(PATH_PREFIX)/Wrapper.java			\
+	$(PATH_PREFIX)/regexp/NativeRegExp.java		\
+	$(PATH_PREFIX)/regexp/NativeRegExpCtor.java	\
+	$(PATH_PREFIX)/regexp/RegExpImpl.java		\
+	$(PATH_PREFIX)/regexp/SubString.java		\
+	$(PATH_PREFIX)/optimizer/Block.java		\
+	$(PATH_PREFIX)/optimizer/Codegen.java		\
+	$(PATH_PREFIX)/optimizer/DataFlowBitSet.java	\
+	$(PATH_PREFIX)/optimizer/FatBlock.java		\
+	$(PATH_PREFIX)/optimizer/JavaScriptClassLoader.java\
+	$(PATH_PREFIX)/optimizer/OptClassNameHelper.java\
+	$(PATH_PREFIX)/optimizer/OptFunctionNode.java	\
+	$(PATH_PREFIX)/optimizer/OptIRFactory.java	\
+	$(PATH_PREFIX)/optimizer/OptLocalVariable.java	\
+	$(PATH_PREFIX)/optimizer/OptRuntime.java	\
+	$(PATH_PREFIX)/optimizer/OptTransformer.java	\
+	$(PATH_PREFIX)/optimizer/OptVariableTable.java	\
+	$(PATH_PREFIX)/optimizer/Optimizer.java		\
+	$(PATH_PREFIX)/optimizer/StmtNodeIterator.java	\
+	$(PATH_PREFIX)/optimizer/TypeEvent.java		\
+	$(PATH_PREFIX)/../classfile/ByteCode.java	\
+	$(PATH_PREFIX)/../classfile/ClassFileWriter.java\
+	$(NULL)
+
+RESOURCEDIR = $(PATH_PREFIX)/resources
+RESOURCES = $(RESOURCEDIR)/*.properties
+
+# This must be evaluated in some context where the classes can be
+# found; we can't use a simple translation from sources, because a
+# .java file may produce more than one .class file.
+# (use org/mozilla/classfile explicitly for now; should be replaced
+# with something parameterized, but jar doesn't understand ..)
+CLASSES = $(PATH_PREFIX)/*.class $(PATH_PREFIX)/regexp/*.class \
+	$(PATH_PREFIX)/optimizer/*.class org/mozilla/classfile/*.class
+
+# A class or set of classes as visible from the top level.  For want
+# of ${subst ,,}.  This variable is only used to trigger dependency
+# analysis, and multiple words confuse gmake, so it can be smaller
+# than the full set of sources.  (We assume we'll never need to do the
+# same thing with RESOURCES.)
+TLCLASS = $(CLASSDIR)/$(PATH_PREFIX)/*.class
+
+# An empty file, used mainly for timestamp/dependency purposes by 
+# "fast" builds
+FASTTARGET=$(CLASSDIR)/.lastbuild
+
+
+$(JAR) : $(TLCLASS) $(CLASSDIR)/$(RESOURCES)
+	cd $(CLASSDIR) ; \
+		jar cf ../$(JAR) $(CLASSES) $(RESOURCES)
+
+$(TLCLASS) : $(SOURCES)
+	- mkdir -p $(CLASSDIR)
+	echo "" > $(FASTTARGET)
+	$(JAVAC) $(JFLAGS) -d $(CLASSDIR) $(SOURCES)
+
+$(CLASSDIR)/$(RESOURCES) : $(RESOURCES)
+	- mkdir -p $(CLASSDIR)/$(RESOURCEDIR)
+	cp $(RESOURCES) $(CLASSDIR)/$(RESOURCEDIR)
+
+# Since the jar file is a target for regular builds, "fast" builds use a 
+# dummy file, updated before each compilation to provide a timestamp.
+# Even so, using a dummy file is far from foolproof, so we still need 
+# the regular build. 
+
+fast: $(FASTTARGET)
+
+# So that we recompile only the files that have changed, we pretend 
+# the only real dependencies are the source files, and recopy the 
+# resources every time.  Right now (14 Jun 99), the only resource is 
+# Messages.properties, so it's a small price to pay.
+$(FASTTARGET) : $(SOURCES)
+	- mkdir -p $(CLASSDIR)/$(RESOURCEDIR)
+	cp $(RESOURCES) $(CLASSDIR)/$(RESOURCEDIR)
+	echo "" > $(FASTTARGET)
+	$(JAVAC) $(JFLAGS) -d $(CLASSDIR) $(?)
+	cd $(CLASSDIR) ; \
+		jar cf ../$(JAR) $(CLASSES) $(RESOURCES)
+
+clean :
+	- cd $(CLASSDIR)
+	- rm $(CLASSES)
+	- rm $(PATH_PREFIX)/message.ids \
+		$(PATH_PREFIX)/property.ids \
+		$(PATH_PREFIX)/MANIFEST
+
+clobber : clean
+	-rm $(JAR)
+
+$(PATH_PREFIX)/MANIFEST : $(SOURCES) $(RESOURCES) $(PATH_PREFIX)/Makefile
+	ls $(SOURCES) $(RESOURCES) $(PATH_PREFIX)/Makefile \
+		> $(@)
+
+# A sed/grep regular expression.
+MESSAGE_PREFIX = msg\.
+
+
+# Find all the msg.* strings in the source, and condense them to a sorted list,
+# excluding duplicates.
+
+$(PATH_PREFIX)/message.ids : $(SOURCES)
+	grep '$(MESSAGE_PREFIX)' $(SOURCES) |\
+	sed -e 's/.*\"\($(MESSAGE_PREFIX)\)\([^\"]*\).*/\1\2/' | \
+	sort | uniq > $(PATH_PREFIX)/message.ids
+
+
+# Find all the msg.* strings in the resource files, and condense them to a
+# sorted list, not excluding duplicates.
+$(PATH_PREFIX)/property.ids : $(RESOURCES)
+	grep '^$(MESSAGE_PREFIX)' $(RESOURCES) |\
+	sed -e 's/.*\($(MESSAGE_PREFIX)\)\([^ =]*\).*/\1\2/' |\
+	sort > $(PATH_PREFIX)/property.ids
+
+
+# Compare the resulting message.ids and property.ids files and confirm
+# that they do not differ.  This means that every message string used
+# in the source is defined somewhere in the resource file, every
+# resource in the resource file is used somewhere in the source, and
+# no resource is defined more than once.
+check : $(PATH_PREFIX)/message.ids $(PATH_PREFIX)/property.ids FORCE
+	- diff $(PATH_PREFIX)/message.ids $(PATH_PREFIX)/property.ids
+
+# look for unmatched single quotes ... seems to fail when none!
+#	- sed -e s/\'\'//g $($RESOURCES) | grep \'
+
+# Emulate .PHONY
+FORCE :
+
+
+
+

mozilla/js/rhino/org/mozilla/javascript/NativeArray.java

@@ -0,0 +1,954 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ * Mike McCabe
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+import java.util.Hashtable;
+
+/**
+ * This class implements the Array native object.
+ * @author Norris Boyd
+ * @author Mike McCabe
+ */
+public class NativeArray extends ScriptableObject {
+
+    /*
+     * Optimization possibilities and open issues:
+     * - Long vs. double schizophrenia.  I suspect it might be better
+     * to use double throughout.
+
+     * - Most array operations go through getElem or setElem (defined
+     * in this file) to handle the full 2^32 range; it might be faster
+     * to have versions of most of the loops in this file for the
+     * (infinitely more common) case of indices < 2^31.
+
+     * - Functions that need a new Array call "new Array" in the
+     * current scope rather than using a hardwired constructor;
+     * "Array" could be redefined.  It turns out that js calls the
+     * equivalent of "new Array" in the current scope, except that it
+     * always gets at least an object back, even when Array == null.
+     */
+
+    /**
+     * Zero-parameter constructor: just used to create Array.prototype
+     */
+    public NativeArray() {
+        dense = null;
+        this.length = 0;
+    }
+
+    public NativeArray(long length) {
+        int intLength = (int) length;
+        if (intLength == length && intLength > 0) {
+            if (intLength > maximumDenseLength)
+                intLength = maximumDenseLength;
+            dense = new Object[intLength];
+            for (int i=0; i < intLength; i++)
+                dense[i] = NOT_FOUND;
+        }
+        this.length = length;
+    }
+
+    public NativeArray(Object[] array) {
+        dense = array;
+        this.length = array.length;
+    }
+
+    public static void finishInit(Scriptable scope, FunctionObject ctor,
+                                  Scriptable proto)
+    {
+        // Set some method length values.
+        // See comment for NativeString.finishInit()
+
+        String[] specialLengthNames = { "reverse",
+                                        "toString",
+                                      };
+
+        short[] specialLengthValues = { 0,
+                                        0,
+                                      };
+
+        for (int i=0; i < specialLengthNames.length; i++) {
+            Object obj = proto.get(specialLengthNames[i], proto);
+            ((FunctionObject) obj).setLength(specialLengthValues[i]);
+        }
+    }
+    
+    public String getClassName() {
+        return "Array";
+    }
+
+    public Object get(int index, Scriptable start) {
+        if (dense != null && 0 <= index && index < dense.length)
+            return dense[index];
+        return super.get(index, start);
+    }
+
+    public boolean has(int index, Scriptable start) {
+        if (dense != null && 0 <= index && index < dense.length)
+            return dense[index] != NOT_FOUND;
+        return super.has(index, start);
+    }
+
+    public void put(String id, Scriptable start, Object value) {
+        // only set the array length if given an array index (ECMA 15.4.0)
+
+        // try to get an array index from id
+        double d = ScriptRuntime.toNumber(id);
+
+        if (ScriptRuntime.toUint32(d) == d &&
+            ScriptRuntime.numberToString(d, 10).equals(id) &&
+            this.length <= d && d != 4294967295.0)
+        {
+            this.length = (long)d + 1;
+        }
+
+        super.put(id, start, value);
+    }
+
+    public void put(int index, Scriptable start, Object value) {
+        // only set the array length if given an array index (ECMA 15.4.0)
+
+        if (this.length <= index) {
+            // avoid overflowing index!
+            this.length = (long)index + 1;
+        }
+
+        if (dense != null && 0 <= index && index < dense.length) {
+            dense[index] = value;
+            return;
+        }
+
+        super.put(index, start, value);
+    }
+
+    public void delete(int index) {
+        if (dense != null && 0 <= index && index < dense.length) {
+            dense[index] = NOT_FOUND;
+            return;
+        }
+        super.delete(index);
+    }
+
+    public Object[] getIds() {
+        Object[] superIds = super.getIds();
+        if (dense == null)
+            return superIds;
+        int count = 0;
+        int last = dense.length;
+        if (last > length)
+            last = (int) length;
+        for (int i=last-1; i >= 0; i--) {
+            if (dense[i] != NOT_FOUND)
+                count++;
+        }
+        count += superIds.length;
+        Object[] result = new Object[count];
+        System.arraycopy(superIds, 0, result, 0, superIds.length);
+        for (int i=last-1; i >= 0; i--) {
+            if (dense[i] != NOT_FOUND)
+                result[--count] = new Integer(i);
+        }
+        return result;
+    }
+    
+    public Object getDefaultValue(Class hint) {
+        if (hint == ScriptRuntime.NumberClass) {
+            Context cx = Context.getContext();
+            if (cx.getLanguageVersion() == Context.VERSION_1_2)
+                return new Long(length);
+        }
+        return super.getDefaultValue(hint);
+    }
+
+    /**
+     * See ECMA 15.4.1,2
+     */
+    public static Object jsConstructor(Context cx, Object[] args, 
+                                       Function ctorObj, boolean inNewExpr)
+        throws JavaScriptException
+    {
+        if (!inNewExpr) {
+            // FunctionObject.construct will set up parent, proto
+            return ctorObj.construct(cx, ctorObj.getParentScope(), args);
+        }
+        if (args.length == 0)
+            return new NativeArray();
+
+        // Only use 1 arg as first element for version 1.2; for
+        // any other version (including 1.3) follow ECMA and use it as
+        // a length.
+        if (cx.getLanguageVersion() == cx.VERSION_1_2) {
+            return new NativeArray(args);
+        }
+        else {
+            if ((args.length > 1) || (!(args[0] instanceof Number)))
+                return new NativeArray(args);
+            else {
+                long len = ScriptRuntime.toUint32(args[0]);
+                if (len != (((Number)(args[0])).doubleValue()))
+                    throw Context.reportRuntimeError(Context.getMessage
+                                     ("msg.arraylength.bad", null));
+                return new NativeArray(len);
+            }
+        }
+    }
+
+    private static final int lengthAttr = ScriptableObject.DONTENUM |
+                                          ScriptableObject.PERMANENT;
+
+    public long jsGet_length() {
+        return length;
+    }
+
+    public void jsSet_length(Object val) {
+        /* XXX do we satisfy this?
+         * 15.4.5.1 [[Put]](P, V):
+         * 1. Call the [[CanPut]] method of A with name P.
+         * 2. If Result(1) is false, return.
+         * ?
+         */
+
+        if (!(val instanceof Number))
+            throw Context.reportRuntimeError(Context.getMessage
+                                     ("msg.arraylength.bad", null));
+        
+        long longVal = ScriptRuntime.toUint32(val);
+        if (longVal != (((Number)val).doubleValue()))
+            throw Context.reportRuntimeError(Context.getMessage
+                             ("msg.arraylength.bad", null));
+
+        if (longVal < length) {
+            // remove all properties between longVal and length
+            if (length - longVal > 0x1000) {
+                // assume that the representation is sparse
+                Object[] e = getIds(); // will only find in object itself
+                for (int i=0; i < e.length; i++) {
+                    if (e[i] instanceof String) {
+                        // > MAXINT will appear as string
+                        String id = (String) e[i];
+                        double d = ScriptRuntime.toNumber(id);
+                        if (d == d && d < length)
+                            delete(id);
+                        continue;
+                    }
+                    int index = ((Number) e[i]).intValue();
+                    if (index >= longVal)
+                        delete(index);
+                }
+            } else {
+                // assume a dense representation
+                for (long i=longVal; i < length; i++) {
+                    // only delete if defined in the object itself
+                    if (hasElem(this, i))
+                        ScriptRuntime.delete(this, new Long(i));
+                }
+            }
+        }
+        length = longVal;
+    }
+
+    /* Support for generic Array-ish objects.  Most of the Array
+     * functions try to be generic; anything that has a length
+     * property is assumed to be an array.  hasLengthProperty is
+     * needed in addition to getLengthProperty, because
+     * getLengthProperty always succeeds - tries to convert strings, etc.
+     */
+    static double getLengthProperty(Scriptable obj) {
+        // These will both give numeric lengths within Uint32 range.
+        if (obj instanceof NativeString)
+            return (double)((NativeString)obj).jsGet_length();
+        if (obj instanceof NativeArray)
+            return (double)((NativeArray)obj).jsGet_length();
+        return ScriptRuntime.toUint32(ScriptRuntime
+                                      .getProp(obj, "length", obj));
+    }
+
+    static boolean hasLengthProperty(Object obj) {
+        if (!(obj instanceof Scriptable) || obj == Context.getUndefinedValue())
+            return false;
+        if (obj instanceof NativeString || obj instanceof NativeArray)
+            return true;
+        Scriptable sobj = (Scriptable)obj;
+
+        // XXX some confusion as to whether or not to walk to get the length
+        // property.  Pending review of js/[new ecma submission] treatment
+        // of 'arrayness'.
+
+        Object property = ScriptRuntime.getProp(sobj, "length", sobj);
+        return property instanceof Number;
+    }
+
+    /* Utility functions to encapsulate index > Integer.MAX_VALUE
+     * handling.  Also avoids unnecessary object creation that would
+     * be necessary to use the general ScriptRuntime.get/setElem
+     * functions... though this is probably premature optimization.
+     */
+    private static boolean hasElem(Scriptable target, long index) {
+        return index > Integer.MAX_VALUE
+               ? target.has(Long.toString(index), target)
+               : target.has((int)index, target);
+    }
+
+    private static Object getElem(Scriptable target, long index) {
+        if (index > Integer.MAX_VALUE) {
+            String id = Long.toString(index);
+            return ScriptRuntime.getElem(target, id, target);
+        } else {
+            return ScriptRuntime.getElem(target, (int)index);
+        }
+    }
+
+    private static void setElem(Scriptable target, long index, Object value) {
+        if (index > Integer.MAX_VALUE) {
+            String id = Long.toString(index);
+            ScriptRuntime.setElem(target, id, value, target);
+        } else {
+            ScriptRuntime.setElem(target, (int)index, value);
+        }
+    }
+
+    public static String jsFunction_toString(Context cx, Scriptable thisObj,
+                                             Object[] args, Function funObj)
+    {
+        return toStringHelper(cx, thisObj, 
+                              cx.getLanguageVersion() == cx.VERSION_1_2);
+    }
+    
+    private static String toStringHelper(Context cx, Scriptable thisObj,
+                                         boolean toSource)
+    {
+        /* It's probably redundant to handle long lengths in this
+         * function; StringBuffers are limited to 2^31 in java.
+         */
+
+        long length = (long)getLengthProperty(thisObj);
+
+        StringBuffer result = new StringBuffer();
+
+        if (cx.iterating == null)
+            cx.iterating = new Hashtable(31);
+        boolean iterating = cx.iterating.get(thisObj) == Boolean.TRUE;
+
+        // whether to return '4,unquoted,5' or '[4, "quoted", 5]'
+        String separator;
+
+        if (toSource) {
+            result.append("[");
+            separator = ", ";
+        } else {
+            separator = ",";
+        }
+
+        boolean haslast = false;
+        long i = 0;
+
+        if (!iterating) {
+            for (i = 0; i < length; i++) {
+                if (i > 0)
+                    result.append(separator);
+                Object elem = getElem(thisObj, i);
+                if (elem == null || elem == Undefined.instance) {
+                    haslast = false;
+                    continue;
+                }
+                haslast = true;
+
+                if (elem instanceof String) {
+                    if (toSource) {
+                        result.append("\"");
+                        result.append(ScriptRuntime.escapeString
+                                      (ScriptRuntime.toString(elem)));
+                        result.append("\"");
+                    } else {
+                        result.append(ScriptRuntime.toString(elem));
+                    }
+                } else {
+                    /* wrap changes to cx.iterating in a try/finally
+                     * so that the reference always gets removed, and
+                     * we don't leak memory.  Good place for weak
+                     * references, if we had them.  */
+                    try {
+                        // stop recursion.
+                        cx.iterating.put(thisObj, Boolean.TRUE);
+                        result.append(ScriptRuntime.toString(elem));
+                    } finally {
+                        cx.iterating.remove(thisObj);
+                    }
+                }
+            }
+        }
+
+        if (toSource) {
+            //for [,,].length behavior; we want toString to be symmetric.
+            if (!haslast && i > 0)
+                result.append(", ]");
+            else
+                result.append("]");
+        }
+        return result.toString();
+    }
+
+    /**
+     * See ECMA 15.4.4.3
+     */
+    public static String jsFunction_join(Context cx, Scriptable thisObj,
+                                         Object[] args, Function funObj)
+    {
+        StringBuffer result = new StringBuffer();
+        String separator;
+
+        double length = getLengthProperty(thisObj);
+
+        // if no args, use "," as separator
+        if (args.length < 1) {
+            separator = ",";
+        } else {
+            separator = ScriptRuntime.toString(args[0]);
+        }
+        for (long i=0; i < length; i++) {
+            if (i > 0)
+                result.append(separator);
+            Object temp = getElem(thisObj, i);
+            if (temp == null || temp == Undefined.instance)
+                continue;
+            result.append(ScriptRuntime.toString(temp));
+        }
+        return result.toString();
+    }
+
+    /**
+     * See ECMA 15.4.4.4
+     */
+    public static Scriptable jsFunction_reverse(Context cx, Scriptable thisObj,
+                                                Object[] args, Function funObj)
+    {
+        long len = (long)getLengthProperty(thisObj);
+
+        long half = len / 2;
+        for(long i=0; i < half; i++) {
+            long j = len - i - 1;
+            Object temp1 = getElem(thisObj, i);
+            Object temp2 = getElem(thisObj, j);
+            setElem(thisObj, i, temp2);
+            setElem(thisObj, j, temp1);
+        }
+        return thisObj;
+    }
+
+    /**
+     * See ECMA 15.4.4.5
+     */
+    public static Scriptable jsFunction_sort(Context cx, Scriptable thisObj,
+                                             Object[] args, Function funObj)
+        throws JavaScriptException
+    {
+        long length = (long)getLengthProperty(thisObj);
+
+        Object compare;
+        if (args.length > 0 && Undefined.instance != args[0])
+            // sort with given compare function
+            compare = args[0];
+        else
+            // sort with default compare
+            compare = null;
+
+
+        // OPT: Would it make sense to use the extended sort for very small
+        // arrays?
+
+        // Should we use the extended sort function, or the faster one?
+        if (length >= Integer.MAX_VALUE) {
+            qsort_extended(cx, compare, thisObj, 0, length - 1);
+        } else {
+            // copy the JS array into a working array, so it can be
+            // sorted cheaply.
+            Object[] working = new Object[(int)length];
+            for (int i=0; i<length; i++) {
+                working[i] = getElem(thisObj, i);
+            }
+
+            qsort(cx, compare, working, 0, (int)length - 1, funObj);
+
+            // copy the working array back into thisObj
+            for (int i=0; i<length; i++) {
+                setElem(thisObj, i, working[i]);
+            }
+        }
+        return thisObj;
+    }
+
+    private static double qsortCompare(Context cx, Object jsCompare, Object x,
+                                       Object y, Scriptable scope)
+        throws JavaScriptException
+    {
+        Object undef = Undefined.instance;
+
+        // sort undefined to end
+        if (undef == x || undef == y) {
+            if (undef != x)
+                return -1;
+            if (undef != y)
+                return 1;
+            return 0;
+        }
+
+        if (jsCompare == null) {
+            // if no compare function supplied, sort lexicographically
+            String a = ScriptRuntime.toString(x);
+            String b = ScriptRuntime.toString(y);
+
+            return a.compareTo(b);
+        } else {
+            // assemble args and call supplied JS compare function
+            // OPT: put this argument creation in the caller and reuse it.
+            // XXX what to do when compare function returns NaN?  ECMA states
+            // that it's then not a 'consistent compararison function'... but
+            // then what do we do?  Back out and start over with the generic
+            // compare function when we see a NaN?  Throw an error?
+            Object[] args = {x, y};
+//             return ScriptRuntime.toNumber(ScriptRuntime.call(jsCompare, null,
+//                                                              args));
+            // for now, just ignore it:
+            double d = ScriptRuntime.
+                toNumber(ScriptRuntime.call(cx, jsCompare, null, args, scope));
+
+            return (d == d) ? d : 0;
+        }
+    }
+
+    private static void qsort(Context cx, Object jsCompare, Object[] working,
+                              int lo, int hi, Scriptable scope)
+        throws JavaScriptException
+    {
+        Object pivot;
+        int i, j;
+        int a, b;
+
+        while (lo < hi) {
+            i = lo;
+            j = hi;
+            a = i;
+            pivot = working[a];
+            while (i < j) {
+                for(;;) {
+                    b = j;
+                    if (qsortCompare(cx, jsCompare, working[j], pivot, 
+                                     scope) <= 0)
+                        break;
+                    j--;
+                }
+                working[a] = working[b];
+                while (i < j && qsortCompare(cx, jsCompare, working[a],
+                                             pivot, scope) <= 0)
+                {
+                    i++;
+                    a = i;
+                }
+                working[b] = working[a];
+            }
+            working[a] = pivot;
+            if (i - lo < hi - i) {
+                qsort(cx, jsCompare, working, lo, i - 1, scope);
+                lo = i + 1;
+            } else {
+                qsort(cx, jsCompare, working, i + 1, hi, scope);
+                hi = i - 1;
+            }
+        }
+    }
+
+    // A version that knows about long indices and doesn't use
+    // a working array.  Probably will never be used.
+    private static void qsort_extended(Context cx, Object jsCompare,
+                                       Scriptable target, long lo, long hi)
+        throws JavaScriptException
+    {
+        Object pivot;
+        long i, j;
+        long a, b;
+
+        while (lo < hi) {
+            i = lo;
+            j = hi;
+            a = i;
+            pivot = getElem(target, a);
+            while (i < j) {
+                for(;;) {
+                    b = j;
+                    if (qsortCompare(cx, jsCompare, getElem(target, j),
+                                     pivot, target) <= 0)
+                        break;
+                    j--;
+                }
+                setElem(target, a, getElem(target, b));
+                while (i < j && qsortCompare(cx, jsCompare,
+                                             getElem(target, a), 
+                                             pivot, target) <= 0)
+                {
+                    i++;
+                    a = i;
+                }
+                setElem(target, b, getElem(target, a));
+            }
+            setElem(target, a, pivot);
+            if (i - lo < hi - i) {
+                qsort_extended(cx, jsCompare, target, lo, i - 1);
+                lo = i + 1;
+            } else {
+                qsort_extended(cx, jsCompare, target, i + 1, hi);
+                hi = i - 1;
+            }
+        }
+    }
+
+    /**
+     * Non-ECMA methods.
+     */
+
+    public static Object jsFunction_push(Context cx, Scriptable thisObj,
+                                         Object[] args, Function funObj)
+    {
+        double length = getLengthProperty(thisObj);
+        for (int i = 0; i < args.length; i++) {
+            setElem(thisObj, (long)length + i, args[i]);
+        }
+
+        length += args.length;
+        ScriptRuntime.setProp(thisObj, "length", new Double(length), thisObj);
+
+        /*
+         * If JS1.2, follow Perl4 by returning the last thing pushed.
+         * Otherwise, return the new array length.
+         */
+        if (cx.getLanguageVersion() == Context.VERSION_1_2)
+            // if JS1.2 && no arguments, return undefined.
+            return args.length == 0
+                ? Context.getUndefinedValue()
+                : args[args.length - 1];
+
+        else
+            return new Long((long)length);
+    }
+
+    public static Object jsFunction_pop(Context cx, Scriptable thisObj, 
+                                        Object[] args, Function funObj)
+    {
+        Object result;
+        double length = getLengthProperty(thisObj);
+        if (length > 0) {
+            length--;
+
+            // Get the to-be-deleted property's value.
+            result = getElem(thisObj, (long)length);
+
+            // We don't need to delete the last property, because
+            // setLength does that for us.
+        } else {
+            result = Context.getUndefinedValue();
+        }
+        // necessary to match js even when length < 0; js pop will give a
+        // length property to any target it is called on.
+        ScriptRuntime.setProp(thisObj, "length", new Double(length), thisObj);
+
+        return result;
+    }
+
+    public static Object jsFunction_shift(Context cx, Scriptable thisObj, 
+                                          Object[] args, Function funOjb)
+    {
+        Object result;
+        double length = getLengthProperty(thisObj);
+        if (length > 0) {
+            long i = 0;
+            length--;
+
+            // Get the to-be-deleted property's value.
+            result = getElem(thisObj, i);
+
+            /*
+             * Slide down the array above the first element.  Leave i
+             * set to point to the last element.
+             */
+            if (length > 0) {
+                for (i = 1; i <= length; i++) {
+                    Object temp = getElem(thisObj, i);
+                    setElem(thisObj, i - 1, temp);
+                }
+            }
+            // We don't need to delete the last property, because
+            // setLength does that for us.
+        } else {
+            result = Context.getUndefinedValue();
+        }
+        ScriptRuntime.setProp(thisObj, "length", new Double(length), thisObj);
+        return result;
+    }
+
+    public static Object jsFunction_unshift(Context cx, Scriptable thisObj,
+                                            Object[] args, Function funOjb)
+    {
+        Object result;
+        double length = (double)getLengthProperty(thisObj);
+        int argc = args.length;
+
+        if (args.length > 0) {
+            /*  Slide up the array to make room for args at the bottom */
+            if (length > 0) {
+                for (long last = (long)length - 1; last >= 0; last--) {
+                    Object temp = getElem(thisObj, last);
+                    setElem(thisObj, last + argc, temp);
+                }
+            }
+
+            /* Copy from argv to the bottom of the array. */
+            for (int i = 0; i < args.length; i++) {
+                setElem(thisObj, i, args[i]);
+            }
+
+            /* Follow Perl by returning the new array length. */
+            length += args.length;
+            ScriptRuntime.setProp(thisObj, "length",
+                                  new Double(length), thisObj);
+        }
+        return new Long((long)length);
+    }
+
+    public static Object jsFunction_splice(Context cx, Scriptable thisObj, 
+                                           Object[] args, Function funObj)
+    {
+        /* create an empty Array to return. */
+        Scriptable scope = getTopLevelScope(funObj);
+        Object result = ScriptRuntime.newObject(cx, scope, "Array", null);
+        int argc = args.length;
+        if (argc == 0)
+            return result;
+        double length = getLengthProperty(thisObj);
+
+        /* Convert the first argument into a starting index. */
+        double begin = ScriptRuntime.toInteger(args[0]);
+        double end;
+        double delta;
+        double count;
+
+        if (begin < 0) {
+            begin += length;
+            if (begin < 0)
+                begin = 0;
+        } else if (begin > length) {
+            begin = length;
+        }
+        argc--;
+
+        /* Convert the second argument from a count into a fencepost index. */
+        delta = length - begin;
+
+        if (args.length == 1) {
+            count = delta;
+            end = length;
+        } else {
+            count = ScriptRuntime.toInteger(args[1]);
+            if (count < 0)
+                count = 0;
+            else if (count > delta)
+                count = delta;
+            end = begin + count;
+
+            argc--;
+        }
+
+        long lbegin = (long)begin;
+        long lend = (long)end;
+
+        /* If there are elements to remove, put them into the return value. */
+        if (count > 0) {
+            if (count == 1
+                && (cx.getLanguageVersion() == Context.VERSION_1_2))
+            {
+                /*
+                 * JS lacks "list context", whereby in Perl one turns the
+                 * single scalar that's spliced out into an array just by
+                 * assigning it to @single instead of $single, or by using it
+                 * as Perl push's first argument, for instance.
+                 *
+                 * JS1.2 emulated Perl too closely and returned a non-Array for
+                 * the single-splice-out case, requiring callers to test and
+                 * wrap in [] if necessary.  So JS1.3, default, and other
+                 * versions all return an array of length 1 for uniformity.
+                 */
+                result = getElem(thisObj, lbegin);
+            } else {
+                for (long last = lbegin; last < lend; last++) {
+                    Scriptable resultArray = (Scriptable)result;
+                    Object temp = getElem(thisObj, last);
+                    setElem(resultArray, last - lbegin, temp);
+                }
+            }
+        } else if (count == 0
+                   && cx.getLanguageVersion() == Context.VERSION_1_2)
+        {
+            /* Emulate C JS1.2; if no elements are removed, return undefined. */
+            result = Context.getUndefinedValue();
+        }
+
+        /* Find the direction (up or down) to copy and make way for argv. */
+        delta = argc - count;
+
+        if (delta > 0) {
+            for (long last = (long)length - 1; last >= lend; last--) {
+                Object temp = getElem(thisObj, last);
+                setElem(thisObj, last + (long)delta, temp);
+            }
+        } else if (delta < 0) {
+            for (long last = lend; last < length; last++) {
+                Object temp = getElem(thisObj, last);
+                setElem(thisObj, last + (long)delta, temp);
+            }
+        }
+
+        /* Copy from argv into the hole to complete the splice. */
+        int argoffset = args.length - argc;
+        for (int i = 0; i < argc; i++) {
+            setElem(thisObj, lbegin + i, args[i + argoffset]);
+        }
+
+        /* Update length in case we deleted elements from the end. */
+        ScriptRuntime.setProp(thisObj, "length",
+                              new Double(length + delta), thisObj);
+        return result;
+    }
+
+    /*
+     * Python-esque sequence operations.
+     */
+    public static Scriptable jsFunction_concat(Context cx, Scriptable thisObj,
+                                               Object[] args, Function funObj)
+    {
+        /* Concat tries to keep the definition of an array as general
+         * as possible; if it finds that an object has a numeric
+         * 'length' property, then it treats that object as an array.
+         * This treats string atoms and string objects differently; as
+         * string objects have a length property and are accessible by
+         * index, they get exploded into arrays when added, while
+         * atomic strings are just added as strings.
+         */
+
+        // create an empty Array to return.
+        Scriptable scope = getTopLevelScope(funObj);
+        Scriptable result = ScriptRuntime.newObject(cx, scope, "Array", null);
+        double length;
+        long slot = 0;
+
+        /* Put the target in the result array; only add it as an array
+         * if it looks like one.
+         */
+        if (hasLengthProperty(thisObj)) {
+            length = getLengthProperty(thisObj);
+
+            // Copy from the target object into the result
+            for (slot = 0; slot < length; slot++) {
+                Object temp = getElem(thisObj, slot);
+                setElem(result, slot, temp);
+            }
+        } else {
+            setElem(result, slot++, thisObj);
+        }
+
+        /* Copy from the arguments into the result.  If any argument
+         * has a numeric length property, treat it as an array and add
+         * elements separately; otherwise, just copy the argument.
+         */
+        for (int i = 0; i < args.length; i++) {
+            if (hasLengthProperty(args[i])) {
+                // hasLengthProperty => instanceOf Scriptable.
+                Scriptable arg = (Scriptable)args[i];
+                length = getLengthProperty(arg);
+                for (long j = 0; j < length; j++, slot++) {
+                    Object temp = getElem(arg, j);
+                    setElem(result, slot, temp);
+                }
+            } else {
+                setElem(result, slot++, args[i]);
+            }
+        }
+        return result;
+    }
+
+    public static Scriptable jsFunction_slice(Context cx, Scriptable thisObj,
+                                              Object[] args, Function funObj)
+    {
+        Scriptable scope = getTopLevelScope(funObj);
+        Scriptable result = ScriptRuntime.newObject(cx, scope, "Array", null);
+        double length = getLengthProperty(thisObj);
+
+        double begin = 0;
+        double end = length;
+
+        if (args.length > 0) {
+            begin = ScriptRuntime.toInteger(args[0]);
+            if (begin < 0) {
+                begin += length;
+                if (begin < 0)
+                    begin = 0;
+            } else if (begin > length) {
+                begin = length;
+            }
+
+            if (args.length > 1) {
+                end = ScriptRuntime.toInteger(args[1]);
+                if (end < 0) {
+                    end += length;
+                    if (end < 0)
+                        end = 0;
+                } else if (end > length) {
+                    end = length;
+                }
+            }
+        }
+
+        long lbegin = (long)begin;
+        long lend = (long)end;
+        for (long slot = lbegin; slot < lend; slot++) {
+            Object temp = getElem(thisObj, slot);
+            setElem(result, slot - lbegin, temp);
+        }
+
+        return result;
+    }
+
+    private long length;
+    private Object[] dense;
+    private static final int maximumDenseLength = 10000;
+}

mozilla/js/rhino/org/mozilla/javascript/NativeBoolean.java

@@ -0,0 +1,92 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ * Mike McCabe
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+/**
+ * This class implements the Boolean native object.
+ * See ECMA 15.6.
+ * @author Norris Boyd
+ */
+public class NativeBoolean extends ScriptableObject {
+
+    /**
+     * Zero-parameter constructor: just used to create Boolean.prototype
+     */
+    public NativeBoolean() {
+    }
+
+    public NativeBoolean(boolean b) {
+        booleanValue = b;
+    }
+
+    public String getClassName() {
+        return "Boolean";
+    }
+
+    public Object getDefaultValue(Class typeHint) {
+        // This is actually non-ECMA, but will be proposed
+        // as a change in round 2.
+        if (typeHint == ScriptRuntime.BooleanClass)
+	    return booleanValue ? Boolean.TRUE : Boolean.FALSE;
+        return super.getDefaultValue(typeHint);
+    }
+
+    public static Object jsConstructor(Context cx, Object[] args, 
+                                       Function ctorObj, boolean inNewExpr)
+    {
+        boolean b = args.length >= 1
+                    ? ScriptRuntime.toBoolean(args[0])
+                    : false;
+    	if (inNewExpr) {
+    	    // new Boolean(val) creates a new boolean object.
+    	    return new NativeBoolean(b);
+    	}
+
+    	// Boolean(val) converts val to a boolean.
+    	return b ? Boolean.TRUE : Boolean.FALSE;
+    }
+
+    public String jsFunction_toString() {
+	    return booleanValue ? "true" : "false";
+    }
+
+    public boolean jsFunction_valueOf() {
+	    return booleanValue;
+    }
+
+    private boolean booleanValue;
+}

mozilla/js/rhino/org/mozilla/javascript/NativeCall.java

@@ -0,0 +1,135 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+/**
+ * This class implements the activation object.
+ *
+ * See ECMA 10.1.6
+ *
+ * @see org.mozilla.javascript.Arguments
+ * @author Norris Boyd
+ */
+public final class NativeCall extends ScriptableObject {
+
+    NativeCall(Context cx, Scriptable scope, NativeFunction funObj, 
+               Scriptable thisObj, Object[] args)
+    {
+        this(cx, scope, funObj, thisObj);
+        this.originalArgs = args;
+        
+        // initialize values of arguments
+        String[] names = funObj.names;
+        if (names != null) {
+            for (int i=0; i < funObj.argCount; i++) {
+                Object val = i < args.length ? args[i] 
+                                             : Undefined.instance;
+                super.put(names[i+1], this, val);
+            }
+        }
+        
+        // initialize "arguments" property
+        super.put("arguments", this, new Arguments(this));
+    }
+    
+    NativeCall(Context cx, Scriptable scope, NativeFunction funObj, 
+               Scriptable thisObj)
+    {
+        this.funObj = funObj;
+        this.thisObj = thisObj;
+        
+        setParentScope(scope);
+        // leave prototype null
+        
+        // save current activation
+        this.caller = cx.currentActivation;
+        cx.currentActivation = this;
+    }
+    
+    // Needed in order to use this class with ScriptableObject.defineClass
+    public NativeCall() {
+    }
+
+    public String getClassName() {
+        return "Call";
+    }
+    
+    public static Object jsConstructor(Context cx, Object[] args, 
+                                       Function ctorObj, boolean inNewExpr)
+    {
+        if (!inNewExpr) {
+            Object[] errArgs = { "Call" };
+            throw Context.reportRuntimeError(Context.getMessage
+                                             ("msg.only.from.new", errArgs));
+        }
+        ScriptRuntime.checkDeprecated(cx, "Call");
+        NativeCall result = new NativeCall();
+        result.setPrototype(getObjectPrototype(ctorObj));
+        return result;
+    }
+    
+    NativeCall getActivation(NativeFunction f) {
+        NativeCall x = this;
+        do {
+            if (x.funObj == f)
+                return x;
+            x = x.caller;
+        } while (x != null);
+        return null;
+    }
+        
+    public NativeFunction getFunctionObject() {
+        return funObj;
+    }
+
+    public Object[] getOriginalArguments() {
+        return originalArgs;
+    }
+    
+    public NativeCall getCaller() {
+        return caller;
+    }
+        
+    public Scriptable getThisObj() {
+        return thisObj;
+    }
+    
+    NativeCall caller;
+    NativeFunction funObj;
+    Scriptable thisObj;
+    Object[] originalArgs;
+    public int debugPC;
+}

mozilla/js/rhino/org/mozilla/javascript/NativeError.java

@@ -0,0 +1,82 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Roger Lawrence
+ * 
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+
+package org.mozilla.javascript;
+
+/**
+ *
+ * The class of error objects
+ *
+ *  ECMA 15.11
+ */
+public class NativeError extends ScriptableObject {
+
+    public NativeError() {
+    }
+    
+    public String getClassName() { 
+        return "Error"; 
+    }
+
+    public String toString() {
+        return getName() + ": " + getMessage();
+    }
+    
+    public String jsFunction_toString() {
+        return toString();
+    }
+    
+    public String getName() {
+        return ScriptRuntime.toString(
+                ScriptRuntime.getProp(this, "name", this));
+    }
+    
+    public String getMessage() {
+        return ScriptRuntime.toString(
+                ScriptRuntime.getProp(this, "message", this));
+    }    
+    
+    public static void finishInit(Scriptable scope, FunctionObject ctor,
+                                  Scriptable proto)
+        throws PropertyException
+    {
+        ((ScriptableObject) proto).defineProperty("message", "", 
+                                                  ScriptableObject.EMPTY);
+        ((ScriptableObject) proto).defineProperty("name", "Error", 
+                                                  ScriptableObject.EMPTY);
+    }
+
+}

mozilla/js/rhino/org/mozilla/javascript/NativeGlobal.java

@@ -0,0 +1,758 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ * Mike McCabe
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+import java.io.StringReader;
+import java.io.IOException;
+import java.lang.reflect.Method;
+
+/**
+ * This class implements the global native object (function and value 
+ * properties only).
+ * 
+ * See ECMA 15.1.[12].
+ *
+ * @author Mike Shaver
+ */
+
+public class NativeGlobal {
+
+    public static void init(Scriptable scope)
+        throws PropertyException,
+               NotAFunctionException,
+               JavaScriptException
+    {
+
+        String names[] = { "eval",
+                           "parseInt",
+                           "parseFloat",
+                           "escape",
+                           "unescape",
+                           "isNaN",
+                           "isFinite",
+						   "decodeURI",
+						   "decodeURIComponent",
+						   "encodeURI",
+						   "encodeURIComponent"
+                         };
+
+        // We can downcast here because Context.initStandardObjects
+        // takes a ScriptableObject scope.
+        ScriptableObject global = (ScriptableObject) scope;
+        global.defineFunctionProperties(names, NativeGlobal.class,
+                                        ScriptableObject.DONTENUM);
+
+        global.defineProperty("NaN", ScriptRuntime.NaNobj, 
+                              ScriptableObject.DONTENUM);
+        global.defineProperty("Infinity", new Double(Double.POSITIVE_INFINITY),
+                              ScriptableObject.DONTENUM);
+        global.defineProperty("undefined", Undefined.instance,
+                              ScriptableObject.DONTENUM);
+
+        String[] errorMethods = { "ConversionError",
+                                  "EvalError",  
+                                  "RangeError",
+                                  "ReferenceError",
+                                  "SyntaxError",
+                                  "TypeError",
+                                  "URIError"
+                                };          
+        Method[] m = FunctionObject.findMethods(NativeGlobal.class, 
+                                                "CommonError");
+        Context cx = Context.getContext();
+        /*
+            Each error constructor gets its own Error object as a prototype,
+            with the 'name' property set to the name of the error.
+        */
+        for (int i = 0; i < errorMethods.length; i++) {
+            String name = errorMethods[i];
+            FunctionObject ctor = new FunctionObject(name, m[0], global);
+            global.defineProperty(name, ctor, ScriptableObject.DONTENUM);
+            Scriptable errorProto = cx.newObject(scope, "Error");
+            errorProto.put("name", errorProto, name);
+            ctor.put("prototype", ctor, errorProto);
+        }
+    
+    }
+
+    /**
+     * The global method parseInt, as per ECMA-262 15.1.2.2.
+     */
+    public static Object parseInt(String s, int radix) {
+        int len = s.length();
+        if (len == 0)
+            return ScriptRuntime.NaNobj;
+
+        boolean negative = false;
+        int start = 0;
+        char c;
+        do {
+            c = s.charAt(start);
+            if (!Character.isWhitespace(c))
+                break;
+            start++;
+        } while (start < len);
+
+        if (c == '+' || (negative = (c == '-')))
+            start++;
+
+        final int NO_RADIX = -1;
+        if (radix == 0) {
+            radix = NO_RADIX;
+        } else if (radix < 2 || radix > 36) {
+            return ScriptRuntime.NaNobj;
+        } else if (radix == 16 && len - start > 1 &&
+                 s.charAt(start) == '0')
+        {
+            c = s.charAt(start+1);
+            if (c == 'x' || c == 'X')
+                start += 2;
+        }
+
+        if (radix == NO_RADIX) {
+            radix = 10;
+            if (len - start > 1 && s.charAt(start) == '0') {
+                c = s.charAt(start+1);
+                if (c == 'x' || c == 'X') {
+                    radix = 16;
+                    start += 2;
+                } else if (c != '.') {
+                    radix = 8;
+                    start++;
+                }
+            }
+        }
+        
+        double d = ScriptRuntime.stringToNumber(s, start, radix);
+        return new Double(negative ? -d : d);
+    }
+
+    /**
+     * The global method parseFloat, as per ECMA-262 15.1.2.3.
+     *
+     * @param cx unused
+     * @param thisObj unused
+     * @param args the arguments to parseFloat, ignoring args[>=1]
+     * @param funObj unused
+     */
+    public static Object parseFloat(Context cx, Scriptable thisObj,
+                                    Object[] args, Function funObj)
+    {
+        if (args.length < 1)
+            return ScriptRuntime.NaNobj;
+        String s = ScriptRuntime.toString(args[0]);
+        int len = s.length();
+        if (len == 0)
+            return ScriptRuntime.NaNobj;
+
+        int i;
+        char c;
+        // Scan forward to the first digit or .
+        for (i=0; TokenStream.isJSSpace(c = s.charAt(i)) && i+1 < len; i++)
+            /* empty */
+            ;
+
+        int start = i;
+
+        if (c == '+' || c == '-')
+            c = s.charAt(++i);
+
+        if (c == 'I') {
+            // check for "Infinity"
+            double d;
+            if (i+8 <= len && s.substring(i, i+8).equals("Infinity"))
+                d = s.charAt(start) == '-' ? Double.NEGATIVE_INFINITY
+                                           : Double.POSITIVE_INFINITY;
+            else
+                return ScriptRuntime.NaNobj;
+            return new Double(d);
+        }
+
+        // Find the end of the legal bit
+        int decimal = -1;
+        int exponent = -1;
+        for (; i < len; i++) {
+            switch (s.charAt(i)) {
+              case '.':
+                if (decimal != -1) // Only allow a single decimal point.
+                    break;
+                decimal = i;
+                continue;
+
+              case 'e':
+              case 'E':
+                if (exponent != -1)
+                    break;
+                exponent = i;
+                continue;
+
+              case '+':
+              case '-':
+                 // Only allow '+' or '-' after 'e' or 'E'
+                if (exponent != i-1)
+                    break;
+                continue;
+
+              case '0': case '1': case '2': case '3': case '4':
+              case '5': case '6': case '7': case '8': case '9':
+                continue;
+
+              default:
+                break;
+            }
+            break;
+        }
+        s = s.substring(start, i);
+        try {
+            return Double.valueOf(s);
+        }
+        catch (NumberFormatException ex) {
+            return ScriptRuntime.NaNobj;
+        }
+    }
+
+    /**
+     * The global method escape, as per ECMA-262 15.1.2.4.
+
+     * Includes code for the 'mask' argument supported by the C escape
+     * method, which used to be part of the browser imbedding.  Blame
+     * for the strange constant names should be directed there.
+     */
+    private static int
+        URL_XALPHAS = 1,
+        URL_XPALPHAS = 2,
+        URL_PATH = 4;
+
+    public static Object escape(Context cx, Scriptable thisObj,
+                                Object[] args, Function funObj)
+    {
+        char digits[] = {'0', '1', '2', '3', '4', '5', '6', '7',
+                         '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' };
+        
+        if (args.length < 1)
+            args = ScriptRuntime.padArguments(args, 1);
+	
+        String s = ScriptRuntime.toString(args[0]);
+
+        int mask = URL_XALPHAS | URL_XPALPHAS | URL_PATH;
+        if (args.length > 1) { // the 'mask' argument.  Non-ECMA.
+            double d = ScriptRuntime.toNumber(args[1]);
+            if (d != d || ((mask = (int) d) != d) ||
+                0 != (mask & ~(URL_XALPHAS | URL_XPALPHAS | URL_PATH)))
+            {
+                String message = Context.getMessage
+                    ("msg.bad.esc.mask", null);
+                cx.reportError(message);
+                // do the ecma thing, in case reportError returns.
+                mask = URL_XALPHAS | URL_XPALPHAS | URL_PATH;
+            }
+        }
+
+	StringBuffer R = new StringBuffer();
+	for (int k = 0; k < s.length(); k++) {
+	    char c = s.charAt(k);
+	    if (mask != 0 && 
+                ((c >= '0' && c <= '9') ||
+		(c >= 'A' && c <= 'Z') ||
+		(c >= 'a' && c <= 'z') ||
+		c == '@' || c == '*' || c == '_' ||
+                c == '-' || c == '.' ||
+		((c == '/' || c == '+') && mask > 3)))
+		R.append(c);
+	    else if (c < 256) {
+                if (c == ' ' && mask == URL_XPALPHAS) {
+                    R.append('+');
+                } else {
+                    R.append('%');
+                    R.append(digits[c >> 4]);
+                    R.append(digits[c & 0xF]);
+                }
+	    } else {
+                R.append('%');
+                R.append('u');
+                R.append(digits[c >> 12]);
+                R.append(digits[(c & 0xF00) >> 8]);
+                R.append(digits[(c & 0xF0) >> 4]);
+                R.append(digits[c & 0xF]);
+	    }
+	}
+	return R.toString();
+    }
+
+    /**
+     * The global unescape method, as per ECMA-262 15.1.2.5.
+     */
+
+    public static Object unescape(Context cx, Scriptable thisObj,
+                                  Object[] args, Function funObj)
+    {
+	if (args.length < 1)
+            args = ScriptRuntime.padArguments(args, 1);
+
+	String s = ScriptRuntime.toString(args[0]);
+	StringBuffer R = new StringBuffer();
+	stringIter: for (int k = 0; k < s.length(); k++) {
+	    char c = s.charAt(k);
+	    if (c != '%' || k == s.length() -1) {
+		R.append(c);
+		continue;
+	    }
+	    String hex;
+	    int end, start;
+	    if (s.charAt(k+1) == 'u') {
+		start = k+2;
+		end = k+6;
+	    } else {
+		start = k+1;
+		end = k+3;
+	    }
+	    if (end > s.length()) {
+		R.append('%');
+		continue;
+	    }
+	    hex = s.substring(start, end);
+	    for (int i = 0; i < hex.length(); i++)
+		if (!TokenStream.isXDigit(hex.charAt(i))) {
+		    R.append('%');
+		    continue stringIter;
+		}
+	    k = end - 1;
+	    R.append((new Character((char) Integer.valueOf(hex, 16).intValue())));
+	}
+
+	return R.toString();
+    }
+
+    /**
+     * The global method isNaN, as per ECMA-262 15.1.2.6.
+     */
+
+    public static Object isNaN(Context cx, Scriptable thisObj,
+                               Object[] args, Function funObj)
+    {
+        if (args.length < 1)
+            return Boolean.TRUE;
+        double d = ScriptRuntime.toNumber(args[0]);
+        return (d != d) ? Boolean.TRUE : Boolean.FALSE;
+    }
+
+    public static Object isFinite(Context cx, Scriptable thisObj,
+                                  Object[] args, Function funObj)
+    {
+        if (args.length < 1)
+            return Boolean.FALSE;
+        double d = ScriptRuntime.toNumber(args[0]);
+        return (d != d || d == Double.POSITIVE_INFINITY || 
+                d == Double.NEGATIVE_INFINITY)
+               ? Boolean.FALSE
+               : Boolean.TRUE;
+    }
+
+    public static Object eval(Context cx, Scriptable thisObj,
+                              Object[] args, Function funObj)
+        throws JavaScriptException
+    {
+        Object[] a = { "eval" };
+        String m = ScriptRuntime.getMessage("msg.cant.call.indirect", a);
+        throw NativeGlobal.constructError(cx, "EvalError", m, funObj);
+    }
+    
+    /**
+     * The eval function property of the global object.
+     *
+     * See ECMA 15.1.2.1
+     */
+    public static Object evalSpecial(Context cx, Scriptable scope, 
+                                     Object thisArg, Object[] args, 
+                                     String filename, int lineNumber)
+        throws JavaScriptException
+    {
+        if (args.length < 1)
+            return Undefined.instance;
+        Object x = args[0];
+        if (!(x instanceof String)) {
+            String message = Context.getMessage("msg.eval.nonstring", null);
+            Context.reportWarning(message);
+            return x;
+        }
+        int[] linep = { lineNumber };
+        if (filename == null) {
+            filename = Context.getSourcePositionFromStack(linep);
+            if (filename == null) {
+                filename = "<eval'ed string>";
+                linep[0] = 1;
+            }
+        }
+        
+        try {
+            StringReader in = new StringReader((String) x);
+            Object securityDomain = cx.getSecurityDomainForStackDepth(3);
+            
+            // Compile the reader with opt level of -1 to force interpreter
+            // mode.
+            int oldOptLevel = cx.getOptimizationLevel();
+            cx.setOptimizationLevel(-1);
+            Script script = cx.compileReader(scope, in, filename, linep[0], 
+                                             securityDomain);
+            cx.setOptimizationLevel(oldOptLevel);
+            
+            // if the compile fails, an error has been reported by the
+            // compiler, but we need to stop execution to avoid
+            // infinite looping on while(true) { eval('foo bar') } -
+            // so we throw an EvaluatorException.
+            if (script == null) {
+                String message = Context.getMessage("msg.syntax", null);
+                throw new EvaluatorException(message);
+            }
+
+            InterpretedScript is = (InterpretedScript) script;
+            is.itsData.itsFromEvalCode = true;
+            Object result = is.call(cx, scope, (Scriptable) thisArg, null);
+                             
+            return result;
+        }
+        catch (IOException ioe) {
+            // should never happen since we just made the Reader from a String
+            throw new RuntimeException("unexpected io exception");
+        }
+    }
+    
+    
+    /**
+     * The NativeError functions
+     *
+     * See ECMA 15.11.6
+     */
+    public static EcmaError constructError(Context cx, 
+                                           String error, 
+                                           String message,
+                                           Object scope)
+    {
+        int[] linep = { 0 };
+        String filename = cx.getSourcePositionFromStack(linep);
+        return constructError(cx, error, message, scope,
+                              filename, linep[0], 0, null);
+    }
+    
+    /**
+     * The NativeError functions
+     *
+     * See ECMA 15.11.6
+     */
+    public static EcmaError constructError(Context cx, 
+                                           String error, 
+                                           String message,
+                                           Object scope,
+                                           String sourceName,
+                                           int lineNumber,
+                                           int columnNumber,
+                                           String lineSource)
+    {
+        Scriptable scopeObject;
+        try {
+            scopeObject = (Scriptable) scope;
+        }
+        catch (ClassCastException x) {
+            throw new RuntimeException(x.toString());
+        }
+            
+        Object args[] = { message };
+        try {
+            Object errorObject = cx.newObject(scopeObject, error, args);
+            return new EcmaError((NativeError)errorObject, sourceName, 
+                                 lineNumber, columnNumber, lineSource);
+        }
+        catch (PropertyException x) {
+            throw new RuntimeException(x.toString());
+        }
+        catch (JavaScriptException x) {
+            throw new RuntimeException(x.toString());
+        }
+        catch (NotAFunctionException x) {
+            throw new RuntimeException(x.toString());
+        }
+    }
+    
+    /**
+     * The implementation of all the ECMA error constructors (SyntaxError, 
+     * TypeError, etc.)
+     */
+    public static Object CommonError(Context cx, Object[] args, 
+                                     Function ctorObj, boolean inNewExpr)
+    {
+        Scriptable newInstance = new NativeError();
+        newInstance.setPrototype((Scriptable)(ctorObj.get("prototype", ctorObj)));
+        newInstance.setParentScope(cx.ctorScope);
+        if (args.length > 0)
+            newInstance.put("message", newInstance, args[0]);
+        return newInstance;
+    }
+
+	/* 
+	*   ECMA 3, 15.1.3 URI Handling Function Properties
+	*
+	*   The following are implementations of the algorithms
+	*   given in the ECMA specification for the hidden functions
+	*   'Encode' and 'Decode'.
+	*/
+	private static String encode(Context cx, String str, String unescapedSet)
+	{
+	    int j, k = 0, L;
+	    char C, C2;
+	    int V;
+	    char utf8buf[] = new char[6];
+	    StringBuffer R;
+
+	    R = new StringBuffer();
+			
+	    while (k < str.length()) {
+	        C = str.charAt(k);
+			if (unescapedSet.indexOf(C) != -1) {
+				R.append(C);
+	        } else {
+	            if ((C >= 0xDC00) && (C <= 0xDFFF)) {
+		            throw cx.reportRuntimeError(
+										cx.getMessage("msg.bad.uri", null));
+	            }
+	            if ((C < 0xD800) || (C > 0xDBFF))
+	                V = C;
+	            else {
+	                k++;
+	                if (k == str.length()) {
+						throw cx.reportRuntimeError(
+										cx.getMessage("msg.bad.uri", null));
+	                }
+	                C2 = str.charAt(k);
+	                if ((C2 < 0xDC00) || (C2 > 0xDFFF)) {
+	                    throw cx.reportRuntimeError(
+										cx.getMessage("msg.bad.uri", null));
+	                }
+	                V = ((C - 0xD800) << 10) + (C2 - 0xDC00) + 0x10000;
+	            }
+	            L = oneUcs4ToUtf8Char(utf8buf, V);
+	            for (j = 0; j < L; j++) {
+					R.append('%');
+					if (utf8buf[j] < 16)
+						R.append('0');
+					R.append(Integer.toHexString(utf8buf[j]));
+	            }
+	        }
+	        k++;
+	    }
+	    return R.toString();			
+	}
+
+    private static boolean isHex(char c) {
+        return ((c >= '0' && c <= '9')
+                || (c >= 'a' && c <= 'f')
+                || (c >= 'A' && c <= 'F'));
+    }
+
+    private static int unHex(char c) {
+		if (c >= '0' && c <= '9')
+			return c - '0';
+		else
+			if (c >= 'a' && c <= 'f')
+				return c - 'a' + 10;
+			else
+				return c - 'A' +10;
+    }
+
+	private static String decode(Context cx, String str, String reservedSet)
+	{
+	    int start, k = 0;
+	    char C, H;
+	    int V;
+	    int B;
+	    char[] octets = new char[6];
+	    StringBuffer R;
+	    int j, n;
+
+	    R = new StringBuffer();
+
+	    while (k < str.length()) {
+	        C = str.charAt(k);
+	        if (C == '%') {
+	            start = k;
+	            if ((k + 2) >= str.length())
+					throw cx.reportRuntimeError(
+									cx.getMessage("msg.bad.uri", null));
+	            if (!isHex(str.charAt(k + 1)) || !isHex(str.charAt(k + 2)))
+	                throw cx.reportRuntimeError(
+										cx.getMessage("msg.bad.uri", null));
+	            B = unHex(str.charAt(k + 1)) * 16 + unHex(str.charAt(k + 2));
+	            k += 2;
+	            if ((B & 0x80) == 0)
+	                C = (char)B;
+	            else {
+	                n = 1;
+	                while ((B & (0x80 >>> n)) != 0) n++;
+					if ((n == 1) || (n > 6))
+						throw cx.reportRuntimeError(
+										cx.getMessage("msg.bad.uri", null));
+	                octets[0] = (char)B;
+	                if ((k + 3 * (n - 1)) >= str.length())
+						throw cx.reportRuntimeError(
+										cx.getMessage("msg.bad.uri", null));
+	                for (j = 1; j < n; j++) {
+	                    k++;
+	                    if (str.charAt(k) != '%')
+							throw cx.reportRuntimeError(
+										cx.getMessage("msg.bad.uri", null));
+	                    if (!isHex(str.charAt(k + 1)) 
+												|| !isHex(str.charAt(k + 2)))
+							throw cx.reportRuntimeError(
+										cx.getMessage("msg.bad.uri", null));
+	                    B = unHex(str.charAt(k + 1)) * 16 
+												+ unHex(str.charAt(k + 2));
+	                    if ((B & 0xC0) != 0x80)
+							throw cx.reportRuntimeError(
+										cx.getMessage("msg.bad.uri", null));
+	                    k += 2;
+	                    octets[j] = (char)B;
+	                }
+	                V = utf8ToOneUcs4Char(octets, n);
+	                if (V >= 0x10000) {
+	                    V -= 0x10000;
+	                    if (V > 0xFFFFF)
+							throw cx.reportRuntimeError(
+										cx.getMessage("msg.bad.uri", null));
+	                    C = (char)((V & 0x3FF) + 0xDC00);
+	                    H = (char)((V >>> 10) + 0xD800);
+						R.append(H);
+	                }
+	                else
+	                    C = (char)V;
+	            }
+				if (reservedSet.indexOf(C) != -1) {
+					for (int x = 0; x < (k - start + 1); x++)
+						R.append(str.charAt(start + x));
+	            }
+	            else
+	                R.append(C);
+	        }
+	        else
+	            R.append(C);
+	        k++;
+	    }
+	    return R.toString();
+	}
+	
+	private static String uriReservedPlusPound = ";/?:@&=+$,#";
+	private static String uriUnescaped = 
+	"0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz-_.!~*'()";
+
+	public static String decodeURI(Context cx, Scriptable thisObj,
+										Object[] args, Function funObj)
+    {
+		String str = ScriptRuntime.toString(args[0]);
+	    return decode(cx, str, uriReservedPlusPound);
+	}	
+	
+    public static String decodeURIComponent(Context cx, Scriptable thisObj,
+												Object[] args, Function funObj)
+    {
+		String str = ScriptRuntime.toString(args[0]);
+	    return decode(cx, str, "");
+	}	
+	
+    public static Object encodeURI(Context cx, Scriptable thisObj,
+										Object[] args, Function funObj)
+    {
+		String str = ScriptRuntime.toString(args[0]);
+	    return encode(cx, str, uriReservedPlusPound + uriUnescaped);
+	}	
+	
+    public static String encodeURIComponent(Context cx, Scriptable thisObj,
+												Object[] args, Function funObj)
+    {
+		String str = ScriptRuntime.toString(args[0]);
+	    return encode(cx, str, uriUnescaped);
+	}	
+	
+	/* Convert one UCS-4 char and write it into a UTF-8 buffer, which must be
+	 * at least 6 bytes long.  Return the number of UTF-8 bytes of data written.
+	 */
+	private static int oneUcs4ToUtf8Char(char[] utf8Buffer, int ucs4Char)
+	{
+	    int utf8Length = 1;
+
+//	    JS_ASSERT(ucs4Char <= 0x7FFFFFFF);
+	    if ((ucs4Char < 0x80) && (ucs4Char >= 0))
+	        utf8Buffer[0] = (char)ucs4Char;
+	    else {
+	        int i;
+	        int a = ucs4Char >>> 11;
+	        utf8Length = 2;
+	        while (a != 0) {
+	            a >>>= 5;
+	            utf8Length++;
+	        }
+	        i = utf8Length;
+	        while (--i > 0) {
+	            utf8Buffer[i] = (char)((ucs4Char & 0x3F) | 0x80);
+	            ucs4Char >>>= 6;
+	        }
+	        utf8Buffer[0] = (char)(0x100 - (1 << (8-utf8Length)) + ucs4Char);
+	    }
+	    return utf8Length;
+	}
+
+
+	/* Convert a utf8 character sequence into a UCS-4 character and return that
+	 * character.  It is assumed that the caller already checked that the sequence is valid.
+	 */
+	private static int utf8ToOneUcs4Char(char[] utf8Buffer, int utf8Length)
+	{
+	    int ucs4Char;
+		int k = 0;
+//	    JS_ASSERT(utf8Length >= 1 && utf8Length <= 6);
+	    if (utf8Length == 1) {
+	        ucs4Char = utf8Buffer[0];
+//			JS_ASSERT(!(ucs4Char & 0x80));
+	    } else {
+//	        JS_ASSERT((*utf8Buffer & (0x100 - (1 << (7-utf8Length)))) == (0x100 - (1 << (8-utf8Length))));
+	        ucs4Char = utf8Buffer[k++] & ((1<<(7-utf8Length))-1);
+	        while (--utf8Length > 0) {
+//	            JS_ASSERT((*utf8Buffer & 0xC0) == 0x80);
+	            ucs4Char = ucs4Char<<6 | (utf8Buffer[k++] & 0x3F);
+	        }
+	    }
+	    return ucs4Char;
+	}
+
+}

mozilla/js/rhino/org/mozilla/javascript/NativeJavaArray.java

@@ -0,0 +1,158 @@
+/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public
+ * License Version 1.1 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ * The Original Code is Rhino code, released
+ * May 6, 1999.
+ *
+ * The Initial Developer of the Original Code is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1997-1999 Netscape Communications Corporation. All
+ * Rights Reserved.
+ *
+ * Contributor(s): 
+ * Norris Boyd
+ * Frank Mitchell
+ * Mike Shaver
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU Public License (the "GPL"), in which case the
+ * provisions of the GPL are applicable instead of those above.
+ * If you wish to allow use of your version of this file only
+ * under the terms of the GPL and not to allow others to use your
+ * version of this file under the NPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL.  If you do not delete
+ * the provisions above, a recipient may use your version of this
+ * file under either the NPL or the GPL.
+ */
+
+package org.mozilla.javascript;
+
+import java.lang.reflect.Array;
+
+/**
+ * This class reflects Java arrays into the JavaScript environment.
+ *
+ * @author Mike Shaver
+ * @see NativeJavaClass
+ * @see NativeJavaObject
+ * @see NativeJavaPackage
+ */
+
+public class NativeJavaArray extends NativeJavaObject {
+
+    public String getClassName() {
+        return "JavaArray";
+    }
+
+    public static NativeJavaArray wrap(Scriptable scope, Object array) {
+        return new NativeJavaArray(scope, array);
+    }
+
+    public Object unwrap() {
+        return array;
+    }
+
+    public NativeJavaArray(Scriptable scope, Object array) {
+        super(scope, null, ScriptRuntime.ObjectClass);
+        Class cl = array.getClass();
+        if (!cl.isArray()) {
+            throw new RuntimeException("Array expected");
+        }
+        this.array = array;
+        this.length = Array.getLength(array);
+        this.cls = cl.getComponentType();
+    }
+
+    public boolean has(String id, Scriptable start) {
+        return id.equals("length") || super.has(id, start);
+    }
+
+    public boolean has(int index, Scriptable start) {
+        return 0 <= index && index < length;
+    }
+
+    public Object get(String id, Scriptable start) {
+        if (id.equals("length"))
+            return new Integer(length);
+        Object result = super.get(id, start);
+        if (result == NOT_FOUND && 
+            !ScriptRuntime.hasProp(getPrototype(), id)) 
+        {
+            Object errArgs[] = { array.getClass().getName(), 
+                                 id };
+            throw Context.reportRuntimeError(
+                Context.getMessage("msg.java.member.not.found",
+                                   errArgs));
+        }
+        return result;  
+    }
+
+    public Object get(int index, Scriptable start) {
+        if (0 <= index && index < length)
+            return NativeJavaObject.wrap(this, Array.get(array, index), cls);
+        return Undefined.instance;
+    }
+
+    public void put(String id, Scriptable start, Object value) {
+        // Ignore assignments to "length"--it's readonly.
+        if (!id.equals("length"))
+            super.put(id, start, value);
+    }
+    
+    public void put(int index, Scriptable start, Object value) {
+        if (0 <= index && index < length) {
+            Array.set(array, index, NativeJavaObject.coerceType(cls, value));
+            return;
+        }
+        super.put(index, start, value);
+    }
+
+    public Object getDefaultValue(Class hint) {
+        if (hint == null || hint == ScriptRuntime.StringClass) 
+            return array.toString();
+        if (hint == ScriptRuntime.BooleanClass)
+            return Boolean.TRUE;
+        if (hint == ScriptRuntime.NumberClass)
+            return ScriptRuntime.NaNobj;
+        return this;
+    }
+    
+    public Object[] getIds() {
+        Object[] result = new Object[length];
+        int i = length;
+        while (--i >= 0)
+            result[i] = new Integer(i);
+        return result;
+    }
+
+    public boolean hasInstance(Scriptable value) {
+        if (!(value instanceof NativeJavaObject))
+            return false;
+        Object instance = ((NativeJavaObject)value).unwrap();
+        return cls.isInstance(instance);
+    }
+
+    public Scriptable getPrototype() {
+        if (prototype == null) {
+            prototype = 
+                ScriptableObject.getClassPrototype(this.getParentScope(),
+                                                   "Array");
+        }
+        return prototype;
+    }
+
+    Object array;
+    int length;
+    Class cls;
+    Scriptable prototype;
+}