pull from the static tag

git-svn-id: svn://10.0.0.236/branches/NETSCAPE_7_0_RTM_MINIBRANCH@128184 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/build/mac/build_scripts/BuildMozilla.pl

@@ -0,0 +1,80 @@
+#!perl
+
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#   Simon Fraser <sfraser@netscape.com>
+#
+
+require 5.004;
+
+use strict;
+
+use Cwd;
+use Moz::BuildUtils;
+use Moz::BuildCore;
+
+#-------------------------------------------------------------
+# Where have the build options gone?
+# 
+# The various build flags have been centralized into one place. 
+# The master list of options is in MozBuildFlags.txt. However, 
+# you should never need to edit that file, or this one.
+# 
+# To customize what gets built, or where to start the build, 
+# edit the $prefs_file_name file in
+# System Folder:Preferences:Mozilla build prefs:
+# Documentation is provided in that file.
+#-------------------------------------------------------------
+
+my($prefs_file_name) = "Mozilla opt build prefs";
+my($config_header_file_name) = ":mozilla:config:mac:DefinesOptions.h";
+
+#-------------------------------------------------------------
+# hashes to hold build options
+#-------------------------------------------------------------
+my(%build);
+my(%options);
+my(%filepaths);
+my(%optiondefines);
+
+# Hash of input files for this build. Eventually, there will be
+# input files for manifests, and projects too.
+my(%inputfiles) = (
+  "buildflags",     "MozillaBuildFlags.txt",
+  "checkoutdata",   "MozillaCheckoutList.txt",
+  "buildprogress",  "¥ Mozilla opt progress",
+  "buildmodule",    "MozillaBuildList.pm",
+  "checkouttime",   "Mozilla last checkout"
+);
+#-------------------------------------------------------------
+# end build hashes
+#-------------------------------------------------------------
+
+# set the build root directory, which is the the dir above mozilla
+SetupBuildRootDir(":mozilla:build:mac:build_scripts");
+
+# Set up all the flags on $main::, like DEBUG, CARBON etc.
+# Override the defaults using the preferences files.
+SetupDefaultBuildOptions(0, ":mozilla:dist:viewer:", $config_header_file_name);
+
+my($do_checkout)    = 0;
+my($do_build)       = 1;
+
+RunBuild($do_checkout, $do_build, \%inputfiles, $prefs_file_name);

mozilla/build/mac/build_scripts/BuildMozillaDebug.pl

@@ -0,0 +1,80 @@
+#!perl
+
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#   Simon Fraser <sfraser@netscape.com>
+#
+
+require 5.004;
+
+use strict;
+
+use Cwd;
+use Moz::BuildUtils;
+use Moz::BuildCore;
+
+#-------------------------------------------------------------
+# Where have the build options gone?
+# 
+# The various build flags have been centralized into one place. 
+# The master list of options is in MozBuildFlags.txt. However, 
+# you should never need to edit that file, or this one.
+# 
+# To customize what gets built, or where to start the build, 
+# edit the $prefs_file_name file in
+# System Folder:Preferences:Mozilla build prefs:
+# Documentation is provided in that file.
+#-------------------------------------------------------------
+
+my($prefs_file_name) = "Mozilla debug build prefs";
+my($config_header_file_name) = ":mozilla:config:mac:DefinesOptionsDebug.h";
+
+#-------------------------------------------------------------
+# hashes to hold build options
+#-------------------------------------------------------------
+my(%build);
+my(%options);
+my(%filepaths);
+my(%optiondefines);
+
+# Hash of input files for this build. Eventually, there will be
+# input files for manifests, and projects too.
+my(%inputfiles) = (
+  "buildflags",     "MozillaBuildFlags.txt",
+  "checkoutdata",   "MozillaCheckoutList.txt",
+  "buildprogress",  "¥ Mozilla debug progress",
+  "buildmodule",    "MozillaBuildList.pm",
+  "checkouttime",   "Mozilla last checkout"
+);
+#-------------------------------------------------------------
+# end build hashes
+#-------------------------------------------------------------
+
+# set the build root directory, which is the the dir above mozilla
+SetupBuildRootDir(":mozilla:build:mac:build_scripts");
+
+# Set up all the flags on $main::, like DEBUG, CARBON etc.
+# Override the defaults using the preferences files.
+SetupDefaultBuildOptions(1, ":mozilla:dist:viewer_debug:", $config_header_file_name);
+
+my($do_pull)        = 0;    # overridden by flags and prefs
+my($do_build)       = 1;
+
+RunBuild($do_pull, $do_build, \%inputfiles, $prefs_file_name);

mozilla/build/mac/build_scripts/Moz/BuildCore.pm

@@ -0,0 +1,595 @@
+#!perl -w
+package Moz::BuildCore;
+
+require 5.004;
+require Exporter;
+
+use strict;
+use vars qw( @ISA @EXPORT );
+
+# perl includes
+use Cwd;
+use POSIX;
+use Time::Local;
+use File::Basename;
+use LWP::Simple;
+
+# homegrown
+use Moz::Moz;
+use Moz::Jar;
+use Moz::BuildFlags;
+use Moz::BuildUtils;
+use Moz::CodeWarriorLib;
+
+# use MozillaBuildList;   # eventually, this should go away, and be replaced by data input
+
+
+@ISA        = qw(Exporter);
+@EXPORT     = qw(
+                    RunBuild
+                );
+
+
+#//--------------------------------------------------------------------------------------------------
+#// DoPrebuildCheck
+#//
+#// Check the build tools etc before running the build.
+#//--------------------------------------------------------------------------------------------------
+sub DoPrebuildCheck()
+{
+    SanityCheckBuildOptions();
+
+    # launch codewarrior and persist its location. Have to call this before first
+    # call to getCodeWarriorPath().
+    my($ide_path_file) = $main::filepaths{"idepath"};
+    $ide_path_file = full_path_to($ide_path_file);
+    LaunchCodeWarrior($ide_path_file);
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// SanityCheckBuildOptions
+#//--------------------------------------------------------------------------------------------------
+sub SanityCheckBuildOptions()
+{
+    my($bad_options) = 0;
+
+    # Jar options
+    if (!$main::options{chrome_jars} && !$main::options{chrome_files})
+    {
+        print "Warning: Both \$options{chrome_jars} and \$options{chrome_files} are off. You won't get any chrome.\n";
+        $bad_options = 1;
+    }
+
+    if (!$main::options{chrome_jars} && $main::options{use_jars})
+    {
+        print "Warning: \$options{chrome_jars} is off but \$options{use_jars} is on. Your build won't run (expects jars, got files).\n";
+        $bad_options = 1;
+    }
+
+    if (!$main::options{chrome_files} && !$main::options{use_jars})
+    {
+        print "Warning: \$options{chrome_jars} is off but \$options{chrome_files} is on. Your build won't run (expects files, got jars).\n";
+        $bad_options = 1;
+    }
+
+    if ($main::options{ldap_experimental} && !$main::options{ldap})
+    {
+        print "Warning: \$options{ldap_experimental} is on but \$options{ldap} is off. LDAP experimental features will not be built.\n";
+        $bad_options = 1;
+    }
+
+    if ($main::options{wsp} && !$main::options{xmlextras})
+    {
+        print "Warning: \$options{wsp} is on but \$options{xmlextras} is off. wsp will not be built.\n";
+        $bad_options = 1;
+    }
+
+    if ($bad_options) {
+        print "Build will start in 5 seconds. Press command-. to stop\n";
+        
+        DelayFor(5);
+    }
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// GenBuildSystemInfo
+#//--------------------------------------------------------------------------------------------------
+
+sub GenBuildSystemInfo()
+{
+    # always rebuild the configuration program.
+    BuildProjectClean(":mozilla:build:mac:tools:BuildSystemInfo:BuildSystemInfo.mcp", "BuildSystemInfo");
+
+    # delete the configuration file.
+    unlink(":mozilla:build:mac:BuildSystemInfo.pm");
+    
+    # run the program.
+    system(":mozilla:build:mac:BuildSystemInfo");
+
+    # wait for the file to be created.
+    while (!(-e ":mozilla:build:mac:BuildSystemInfo.pm")) { WaitNextEvent(); }
+    
+    # wait for BuildSystemInfo to finish, so that we see correct results.
+    while (IsProcessRunning("BuildSystemInfo")) { WaitNextEvent(); }
+
+    # now, evaluate the contents of the file.
+    open(F, ":mozilla:build:mac:BuildSystemInfo.pm");
+    while (<F>) { eval; }
+    close(F);
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// Make library aliases
+#//--------------------------------------------------------------------------------------------------
+
+sub MakeLibAliases()
+{
+    my($dist_dir) = GetBinDirectory();
+
+    #// ProfilerLib
+    if ($main::PROFILE)
+    {
+        my($profilerlibpath) = Moz::CodeWarriorLib::getCodeWarriorPath("MacOS Support:Profiler:Profiler Common:ProfilerLib");
+        MakeAlias("$profilerlibpath", "$dist_dir"."Essential Files:");
+    }
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// ConfigureBuildSystem
+#//
+#// defines some build-system configuration variables.
+#//--------------------------------------------------------------------------------------------------
+sub ConfigureBuildSystem()
+{
+    #// In the future, we may want to do configurations based on the actual build system itself.
+    #// GenBuildSystemInfo();
+        
+    #// For now, if we discover a newer header file than existed in Universal Interfaces 3.2,
+    #// we'll assume that 3.3 or later is in use.
+    my($universal_interfaces) = Moz::CodeWarriorLib::getCodeWarriorPath("MacOS Support:Universal:Interfaces:CIncludes:");
+    if (-e ($universal_interfaces . "ControlDefinitions.h")) {
+        $main::UNIVERSAL_INTERFACES_VERSION = 0x0330;
+    }
+
+    #// Rename IC SDK folder in the Mac OS Support folder
+    my($ic_sdk_folder) = Moz::CodeWarriorLib::getCodeWarriorPath("MacOS Support:ICProgKit2.0.2");
+    if( -e $ic_sdk_folder)
+    {
+        my($new_ic_folder_name) = Moz::CodeWarriorLib::getCodeWarriorPath("MacOS Support:(ICProgKit2.0.2)");
+        rename ($ic_sdk_folder, $new_ic_folder_name);
+        # note that CodeWarrior doesn't descend into folders with () the name
+        print "Mozilla no longer needs the Internet Config SDK to build:\n  Renaming the 'ICProgKit2.0.2' folder to '(ICProgKit2.0.2)'\n";
+    }
+
+    printf("UNIVERSAL_INTERFACES_VERSION = 0x%04X\n", $main::UNIVERSAL_INTERFACES_VERSION);
+
+    # alias required CodeWarrior libs into the Essential Files folder (only the Profiler lib now)
+    MakeLibAliases();
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// CheckOutModule. Takes variable number of args; first two are required
+#//--------------------------------------------------------------------------------------------------
+sub CheckOutModule($$$$)
+{
+    my($session, $module, $revision, $date) = @_;
+
+    my($result) = $session->checkout($module, $revision, $date);
+    
+    # result of 1 is success
+    if ($result) { return; }
+    
+    my($checkout_err) = $session->getLastError();
+    if ($checkout_err == 708) {
+        die "Error: Checkout was cancelled.\n";
+    } elsif ($checkout_err == 911) {
+        die "Error: CVS session settings are incorrect. Check your password, and the CVS root settings.\n";
+    } elsif ($checkout_err == 703) {
+        die "Error: CVS checkout failed. Unknown module, unknown tag, bad username, or other CVS error.\n";
+    } elsif ($checkout_err == 711) {
+        print "Checkout of '$module' failed.\n";
+    }
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// getScriptFolder
+#//--------------------------------------------------------------------------------------------------
+sub getScriptFolder()
+{
+    return dirname($0);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// getScriptFolder
+#//--------------------------------------------------------------------------------------------------
+sub get_url_contents($)
+{
+    my($url) = @_;
+
+    my($url_contents) = LWP::Simple::get($url);
+    $url_contents =~ s/\r\n/\n/g;     # normalize linebreaks
+    $url_contents =~ s/\r/\n/g;       # normalize linebreaks
+    return $url_contents;
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// get_files_from_content
+#//--------------------------------------------------------------------------------------------------
+sub uniq
+{
+    my $lastval;
+    grep(($_ ne $lastval, $lastval = $_)[$[], @_);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// get_files_from_content
+#//--------------------------------------------------------------------------------------------------
+sub get_files_from_content($)
+{
+    my($content) = @_;
+  
+    my(@jscalls) = grep (/return js_file_menu[^{]*/, split(/\n/, $content));
+    my $i;
+  
+    for ($i = 0; $i < @jscalls ; $i++)
+    {
+        $jscalls[$i] =~ s/.*\(|\).*//g;
+        my(@callparams) = split(/,/, $jscalls[$i]);
+        my ($repos, $dir, $file, $rev) = grep(s/['\s]//g, @callparams);
+        $jscalls[$i] = "$dir/$file";
+    }
+
+  &uniq(sort(@jscalls));
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// getLastUpdateTime
+#// 
+#// Get the last time we updated. Return 0 on failure
+#//--------------------------------------------------------------------------------------------------
+sub getLastUpdateTime($)
+{
+    my($timestamp_file) = @_;
+ 
+    my($time_string);
+    
+    local(*TIMESTAMP_FILE);  
+    unless (open(TIMESTAMP_FILE, "< $timestamp_file")) { return 0; }
+
+    while (<TIMESTAMP_FILE>)
+    {
+        my($line) = $_;
+        chomp($line);
+
+        # ignore comments and empty lines
+        if ($line =~ /^\#/ || $line =~ /^\s*$/) {
+            next;
+        }
+        
+        $time_string = $line;
+    }
+
+    # get the epoch seconds
+    my($last_update_secs) = $time_string;
+    $last_update_secs =~ s/\s#.+$//;
+    
+    print "FAST_UPDATE found that you last updated at ".localtime($last_update_secs)."\n";
+    
+    # how long ago was this, in hours?
+    my($gm_now) = time();
+    my($update_hours) = 1 + ceil(($gm_now - $last_update_secs) / (60 * 60));
+    
+    return $update_hours;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// saveCheckoutTimestamp
+#// 
+#// Create a file on disk containing the current time. Param is time(), which is an Epoch seconds
+#// (and therefore in GMT).
+#// 
+#//--------------------------------------------------------------------------------------------------
+sub saveCheckoutTimestamp($$)
+{
+    my($gm_secs, $timestamp_file) = @_;
+        
+    local(*TIMESTAMP_FILE);
+    open(TIMESTAMP_FILE, ">$timestamp_file") || die "Failed to open $timestamp_file\n";
+    print(TIMESTAMP_FILE "# time of last checkout or update, in GMT. Used by FAST_UPDATE\n");
+    print(TIMESTAMP_FILE "$gm_secs \# around ".localtime()." local time\n");
+    close(TIMESTAMP_FILE);
+
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// FastUpdate
+#// 
+#// Use Bonsai url data to update only those dirs which have new files
+#// 
+#//--------------------------------------------------------------------------------------------------
+sub FastUpdate($$)
+{
+    my($modules, $timestamp_file) = @_;          # list of modules to check out
+
+    my($num_hours) = getLastUpdateTime($timestamp_file);
+    if ($num_hours == 0 || $num_hours > 170) {
+        print "Can't fast_update; last update was too long ago, or never. Doing normal checkout.\n";
+        return 0;
+    }
+
+    print "Doing fast update, pulling files changed in the last $num_hours hours\n";
+
+    my($cvsfile) = AskAndPersistFile($main::filepaths{"sessionpath"});
+    my($session) = Moz::MacCVS->new( $cvsfile );
+    unless (defined($session)) { die "Error: Checkout aborted. Cannot create session file: $session" }
+
+    # activate MacCVS
+    ActivateApplication('Mcvs');
+    
+    my($checkout_start_time) = time();
+
+    #print "Time now is $checkout_start_time ($checkout_start_time + 0)\n";
+    
+    my($this_co);
+    foreach $this_co (@$modules)
+    {
+        my($module, $revision, $date) = ($this_co->[0], $this_co->[1], $this_co->[2]);        
+        
+        # assume that things pulled by date wont change
+        if ($date ne "") {
+            print "$module is pulled by date, so ignoring in FastUpdate.\n";
+            next;
+        }
+
+        my($search_type) = "hours";
+        my($min_date) = "";
+        my($max_date) = "";
+        my($url) = "http://bonsai.mozilla.org/cvsquery.cgi?treeid=default&module=${module}&branch=${revision}&branchtype=match&dir=&file=&filetype=match&who=&whotype=match&sortby=Date&hours=${num_hours}&date=${search_type}&mindate=${min_date}&maxdate=${max_date}&cvsroot=%2Fcvsroot";
+
+        if ($revision eq "") {
+            print "Getting list of checkins to $module from Bonsai...\n";
+        } else {
+            print "Getting list of checkins to $module on branch $revision from Bonsai...\n";
+        }
+        my(@files) = &get_files_from_content(&get_url_contents($url));
+
+        if ($#files > 0)
+        {
+           my(@cvs_co_list);
+        
+           my($co_file);
+           foreach $co_file (@files)
+           {
+               print "Updating $co_file\n";
+               push(@cvs_co_list, $co_file);
+           }
+
+            my($result) = $session->update($revision, \@cvs_co_list);
+            # result of 1 is success
+            if (!$result) { die "Error: Fast update failed\n"; }
+        } else {
+            print "No files in this module changed\n";        
+        }
+    }
+    
+    saveCheckoutTimestamp($checkout_start_time, $timestamp_file);
+    return 1;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// Checkout
+#//--------------------------------------------------------------------------------------------------
+sub CheckoutModules($$$)
+{
+    my($modules, $pull_date, $timestamp_file) = @_;          # list of modules to check out
+
+    my($start_time) = TimeStart();
+
+#    assertRightDirectory();
+    my($cvsfile) = AskAndPersistFile($main::filepaths{"sessionpath"});
+    my($session) = Moz::MacCVS->new( $cvsfile );
+    unless (defined($session)) { die "Error: Checkout aborted. Cannot create session file: $session" }
+
+    my($checkout_start_time) = time();
+    
+    # activate MacCVS
+    ActivateApplication('Mcvs');
+
+    my($this_co);
+    foreach $this_co (@$modules)
+    {
+        my($module, $revision, $date) = ($this_co->[0], $this_co->[1], $this_co->[2]);
+        if ($date eq "") {
+            $date = $pull_date;
+        }
+        CheckOutModule($session, $module, $revision, $date);
+        # print "Checking out $module with ref $revision, date $date\n";
+    }
+
+    saveCheckoutTimestamp($checkout_start_time, $timestamp_file);
+    TimeEnd($start_time, "Checkout");
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// ReadCheckoutModulesFile
+#//--------------------------------------------------------------------------------------------------
+sub ReadCheckoutModulesFile($$)
+{
+    my($modules_file, $co_list) = @_;
+
+    my($checkout_file) = getScriptFolder().":".$modules_file;
+    local(*CHECKOUT_FILE);  
+    open(CHECKOUT_FILE, "< $checkout_file") || die "Error: failed to open checkout list $checkout_file\n";
+    while (<CHECKOUT_FILE>)
+    {
+        my($line) = $_;
+        chomp($line);
+    
+        # ignore comments and empty lines
+        if ($line =~ /^\#/ || $line =~ /^\s*$/) {
+            next;
+        }
+    
+        my(@cvs_co) = ["", "", ""];
+        
+        my($module, $revision, $date) = (0, 1, 2);
+        
+        if ($line =~ /\s*([^#,\s]+)\s*\,\s*([^#,\s]+)\s*\,\s*([^#]+)/)
+        {
+            @cvs_co[$module] = $1;
+            @cvs_co[$revision] = $2;
+            @cvs_co[$date] = $3;
+        }
+        elsif ($line =~ /\s*([^#,\s]+)\s*\,\s*([^#,\s]+)\s*(#.+)?/)
+        {
+            @cvs_co[$module] = $1;
+            @cvs_co[$revision] = $2;
+        }
+        elsif ($line =~ /\s*([^#,\s]+)\s*\,\s*,\s*([^#,]+)/)       
+        {
+            @cvs_co[$module] = $1;
+            @cvs_co[$date] = $2;
+        }
+        elsif ($line =~ /\s*([^#,\s]+)/)
+        {
+            @cvs_co[$module] = $1;
+        }
+        else
+        {
+            die "Error: unrecognized line '$line' in $modules_file\n";
+        }
+        
+        # strip surrounding space from date
+        @cvs_co[$date] =~ s/^\s*|\s*$//g;
+        
+        # print "Going to check out '@cvs_co[$module]', '@cvs_co[$revision]', '@cvs_co[$date]'\n";
+        push(@$co_list, \@cvs_co);
+    }
+
+    close(CHECKOUT_FILE);
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// PullFromCVS
+#//--------------------------------------------------------------------------------------------------
+sub PullFromCVS($$)
+{
+    unless ( $main::build{pull} ) { return; }
+    
+    my($modules_file, $timestamp_file) = @_;
+
+    StartBuildModule("pull");
+    
+    my(@cvs_co_list);
+    ReadCheckoutModulesFile($modules_file, \@cvs_co_list);
+
+    if ($main::FAST_UPDATE && $main::options{pull_by_date})
+    {
+        die "Error: you can't use FAST_UPDATE if you are pulling by date.\n";
+    }
+
+    my($did_fast_update) = $main::FAST_UPDATE && FastUpdate(\@cvs_co_list, $timestamp_file);
+    if (!$did_fast_update)
+    {
+        my($pull_date) = "";
+        if ($main::options{pull_by_date})
+        {
+            # acceptable CVS date formats are (in local time):
+            # ISO8601 (e.g. "1972-09-24 20:05") and Internet (e.g. "24 Sep 1972 20:05").
+            # Perl's localtime() string format also seems to work.
+            $pull_date = localtime().""; # force string interp.
+            print "Pulling by date $pull_date\n";
+        }
+
+        CheckoutModules(\@cvs_co_list, $pull_date, $timestamp_file);
+    }
+
+    EndBuildModule("pull");
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// RunBuild
+#//--------------------------------------------------------------------------------------------------
+sub RunBuild($$$$)
+{
+    my($do_pull, $do_build, $input_files, $build_prefs) = @_;
+
+    InitBuildProgress($input_files->{"buildprogress"});
+    
+    # if we are pulling, we probably want to do a full build, so clear the build progress
+    if ($do_pull) {
+        ClearBuildProgress();    
+    }
+    
+    # read local prefs, and the build progress file, and set flags to say what to build
+    SetupBuildParams(\%main::build,
+                     \%main::options,
+                     \%main::optiondefines,
+                     \%main::filepaths,
+                     $input_files->{"buildflags"},
+                     $build_prefs);
+    
+    # If we were told to pull, make sure we do, overriding prefs etc.
+    if ($do_pull)
+    {
+        $main::build{"pull"} = 1;
+    }
+    
+    # transfer this flag
+    $CodeWarriorLib::CLOSE_PROJECTS_FIRST = $main::CLOSE_PROJECTS_FIRST;
+    
+    # setup the build log
+    SetupBuildLog($main::filepaths{"buildlogfilepath"}, $main::USE_TIMESTAMPED_LOGS);
+    StopForErrors();
+    
+    if ($main::LOG_TO_FILE) {
+        RedirectOutputToFile($main::filepaths{"scriptlogfilepath"});
+    }
+        
+    # run a pre-build check to see that the tools etc are in order
+    DoPrebuildCheck();
+    
+    # do the pull
+    PullFromCVS($input_files->{"checkoutdata"}, $input_files->{"checkouttime"});
+    
+    unless ($do_build) { return; }
+
+    my($build_start) = TimeStart();
+
+    # check the build environment
+    ConfigureBuildSystem();
+
+    # here we load and call methods in the build module indirectly.
+    # we have to use indirection because the build module can be named
+    # differently for different builds.
+    chdir(dirname($0));     # change to the script dir
+    my($build_module) = $input_files->{"buildmodule"};
+    # load the build module
+    require $build_module;
+    {   # scope for no strict 'refs'
+        no strict 'refs';
+        
+        my($package_name) = $build_module;
+        $package_name =~ s/\.pm$//;
+        
+        chdir($main::MOZ_SRC);
+        &{$package_name."::BuildDist"}();
+        
+        chdir($main::MOZ_SRC);
+        &{$package_name."::BuildProjects"}();
+    }
+    
+    # the build finished, so clear the build progress state
+    ClearBuildProgress();
+    
+    TimeEnd($build_start, "Build");
+    print "Build complete\n";
+}
+
+1;

mozilla/build/mac/build_scripts/Moz/BuildFlags.pm

@@ -0,0 +1,425 @@
+#!perl -w
+package Moz::BuildFlags;
+
+require 5.004;
+require Exporter;
+
+# Package that attempts to read a file from the Preferences folder,
+# and get build settings out of it
+
+use strict;
+use Exporter;
+
+use Cwd;
+use File::Basename;
+
+use Moz::Moz;
+use Moz::Prefs;
+
+use vars qw(@ISA @EXPORT);
+
+@ISA      = qw(Exporter);
+@EXPORT   = qw(
+                SetupBuildParams
+                InitBuildProgress
+                WriteBuildProgress
+                ClearBuildProgress
+                ReadBuildProgress
+              );
+
+
+my(@build_flags);
+my(@options_flags);
+my(@filepath_flags);
+
+my(%arrays_list) = (
+  "build_flags",    \@build_flags,
+  "options_flags",  \@options_flags,
+  "filepath_flags", \@filepath_flags
+);
+
+my($progress_file) = "¥ÊBuild progress";
+
+#-------------------------------------------------------------------------------
+# appendArrayFlag
+# 
+# Set a flag in the array
+#-------------------------------------------------------------------------------
+sub appendArrayFlag(@)
+{
+  my($array_name) = shift;
+  my($setting) = shift;
+  my($value) = shift;
+  
+  my(@optional_values);
+  foreach (@_) {
+    push(@optional_values, $_);
+  }
+
+  my(@this_flag) = [$setting, $value, @optional_values];
+  my($flags_array) = $arrays_list{$array_name};
+  if ($flags_array)
+  {
+    push(@{$flags_array}, @this_flag) || die "Failed to append\n";
+  }
+  else
+  {
+    die "Error: unknown build flags array $array_name\n";
+  }
+}
+
+#-------------------------------------------------------------------------------
+# readFlagsFile
+# 
+# Read the file of build flags from disk. File path is relative to the
+# script directory.
+#-------------------------------------------------------------------------------
+sub readFlagsFile($)
+{
+  my($flags_file) = @_;
+
+  my($file_path) = $0;
+  $file_path =~ s/[^:]+$/$flags_file/;
+  
+  print "Reading build flags from '$file_path'\n";
+
+  local(*FLAGS_FILE);
+  open(FLAGS_FILE, "< $file_path") || die "Error: failed to open flags file $file_path\n";
+
+  my($cur_array) = "";
+  
+  while(<FLAGS_FILE>)
+  {
+      my($line) = $_;
+      chomp($line);
+      
+      # ignore comments and empty lines  
+      if ($line =~ /^\#/ || $line =~ /^\s*$/) {
+        next;
+      }
+
+      # 1-word line, probably array name
+      if ($line =~ /^([^#\s]+)\s*$/)
+      {
+        $cur_array = $1;
+        next;  
+      }
+      elsif ($line =~ /^([^#\s]+)\s+\"(.+)\"(\s+#.+)?$/)    # quoted option, possible comment
+      {
+        my($flag) = $1;
+        my($setting) = $2;
+        
+        appendArrayFlag($cur_array, $flag, $setting);
+      }
+      elsif ($line =~ /^([^#\s]+)((\s+[^#\s]+)+)(\s+#.+)?$/)  # multiple word line, possible comment
+      {
+        my($flag) = $1;
+        
+        appendArrayFlag($cur_array, $flag, split(' ', $2));
+      }
+      else
+      {
+        die "Error: unknown build flag at '$line'\n";
+      }
+  
+  }
+  
+  close(FLAGS_FILE);
+}
+
+
+
+#-------------------------------------------------------------------------------
+# flagsArrayToHash
+# 
+# Utility routine to migrate flag from a 2D array to a hash, where
+# item[n][0] is the hash entry name, and item[n][1] is the hash entry value.
+#-------------------------------------------------------------------------------
+
+sub flagsArrayToHash($$)
+{
+  my($src_array, $dest_hash) = @_;
+  
+  my($item);
+  foreach $item (@$src_array)
+  {
+    $dest_hash->{$item->[0]} = $item->[1];
+  }
+}
+
+#-----------------------------------------------
+# printHash
+#
+# Utility routine to print a hash
+#-----------------------------------------------
+sub printHash($)
+{
+  my($hash_ref) = @_;
+ 
+  print "Printing hash:\n";
+  
+  my($key, $value);
+  
+  while (($key, $value) = each (%$hash_ref))
+  {
+    print "  $key $value\n";
+  }
+}
+
+
+#-----------------------------------------------
+# printBuildArray
+#
+# Utility routine to print a 2D array
+#-----------------------------------------------
+sub printBuildArray($)
+{
+  my($build_array) = @_;
+  
+  my($entry);
+  foreach $entry (@$build_array)
+  {  
+    print "$entry->[0] = $entry->[1]\n";
+  }
+
+}
+
+#-------------------------------------------------------------------------------
+# SetBuildFlags
+#-------------------------------------------------------------------------------
+sub SetBuildFlags($)
+{
+  my($build) = @_;
+
+  flagsArrayToHash(\@build_flags, $build);
+}
+
+#-------------------------------------------------------------------------------
+# SetBuildOptions
+#-------------------------------------------------------------------------------
+sub SetBuildOptions($)
+{
+  my($options) = @_;
+
+  flagsArrayToHash(\@options_flags, $options);
+}
+
+#-------------------------------------------------------------------------------
+# SetFilepathFlags
+#-------------------------------------------------------------------------------
+sub SetFilepathFlags($)
+{
+  my($filepath) = @_;
+
+  flagsArrayToHash(\@filepath_flags, $filepath);
+}
+
+#-------------------------------------------------------------------------------
+# SetOptionDefines
+#-------------------------------------------------------------------------------
+sub SetOptionDefines($)
+{
+  my($optiondefines) = @_;
+
+  foreach my $entry (@options_flags)
+  {
+    if (defined($entry->[2])) {
+      $optiondefines->{$entry->[0]}{$entry->[2]} = 1;
+    }
+  }
+}
+
+
+#-------------------------------------------------------------------------------
+# PropagateAllFlags
+#-------------------------------------------------------------------------------
+sub PropagateAllFlags($)
+{
+  my($build_array) = @_;
+  
+  # if "all" is set, set all the flags to 1
+  unless ($build_array->[0][0] eq "all") { die "Error: 'all' must come first in the flags array\n"; }
+  
+  if ($build_array->[0][1] == 1)
+  {
+    my($index);
+    foreach $index (@$build_array)
+    {
+      $index->[1] = 1;
+    }
+  }
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// _getBuildProgressFile
+#//--------------------------------------------------------------------------------------------------
+sub _getBuildProgressFile()
+{
+  return $progress_file;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// setBuildProgressStart
+#// 
+#// This automagically sets $build{"all"} to 0
+#//--------------------------------------------------------------------------------------------------
+sub setBuildProgressStart($$)
+{
+  my($build_array, $name) = @_;
+
+  my($index);
+  foreach $index (@$build_array)
+  {
+    $index->[1] = 0;
+    if ($index->[0] eq $name) {
+      last;
+    }    
+  }
+
+  print "Building from module after $name, as specified by build progress\n";
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// InitBuildProgress
+#//--------------------------------------------------------------------------------------------------
+sub InitBuildProgress($)
+{
+  my($prog_file) = @_;
+  if ($prog_file ne "") {
+    $progress_file = full_path_to($prog_file);
+    print "Writing build progress to $progress_file\n";
+  }
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// WriteBuildProgress
+#//--------------------------------------------------------------------------------------------------
+sub WriteBuildProgress($)
+{
+  my($module_built) = @_;
+
+  my($progress_file) = _getBuildProgressFile();
+  
+  if ($progress_file ne "")
+  {
+    open(PROGRESS_FILE, ">>$progress_file") || die "Failed to open $progress_file\n";
+    print(PROGRESS_FILE "$module_built\n");
+    close(PROGRESS_FILE);
+  }
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// ClearBuildProgress
+#//--------------------------------------------------------------------------------------------------
+sub ClearBuildProgress()
+{
+  my($progress_file) = _getBuildProgressFile();
+  if ($progress_file ne "") {
+    unlink $progress_file;
+  }
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// WipeBuildProgress
+#//--------------------------------------------------------------------------------------------------
+sub WipeBuildProgress()
+{
+  print "Ignoring build progress\n";
+  ClearBuildProgress();
+  $progress_file = "";
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// ReadBuildProgress
+#//--------------------------------------------------------------------------------------------------
+sub ReadBuildProgress($)
+{
+  my($build_array) = @_;
+  my($progress_file) = _getBuildProgressFile();
+
+  my($last_module);
+  
+  if (open(PROGRESS_FILE, "< $progress_file"))
+  {
+    print "Getting build progress from $progress_file\n";
+    
+    while (<PROGRESS_FILE>)
+    {
+      my($line) = $_;
+      chomp($line);
+      $last_module = $line;
+    }
+    
+    close(PROGRESS_FILE);
+  }
+  
+  if ($last_module)
+  {
+    setBuildProgressStart($build_array, $last_module);
+  }
+}
+
+#-------------------------------------------------------------------------------
+# clearOldBuildSettings
+#-------------------------------------------------------------------------------
+sub clearOldBuildSettings($$$$)
+{
+  my($build, $options, $optiondefines, $filepaths) = @_;
+
+  # empty the arrays in case we're being called twice
+  @build_flags = ();
+  @options_flags = ();
+  @filepath_flags = ();
+  
+  # and empty the hashes
+  %$build = ();
+  %$options = ();
+  %$optiondefines = ();
+  %$filepaths = ();
+}
+
+#-------------------------------------------------------------------------------
+# SetupBuildParams
+#-------------------------------------------------------------------------------
+sub SetupBuildParams($$$$$$)
+{
+  my($build, $options, $optiondefines, $filepaths, $flags_file, $prefs_file) = @_;
+  
+  # Empty the hashes and arrays, to wipe out any stale data.
+  # Needed because these structures persist across two build scripts
+  # called using 'do' from a parent script.
+  clearOldBuildSettings($build, $options, $optiondefines, $filepaths);
+  
+  # Read from the flags file, which sets up the various arrays
+  readFlagsFile($flags_file);
+  
+  # If 'all' is set in the build array, propagate that to all entries
+  PropagateAllFlags(\@build_flags);
+  
+  # read the user pref file, that can change values in the array
+  ReadMozUserPrefs($prefs_file, \@build_flags, \@options_flags, \@filepath_flags);
+
+  # If build progress exists, this clears flags in the array up to a certain point
+  if ($main::USE_BUILD_PROGRESS) {
+    ReadBuildProgress(\@build_flags);
+  } else {
+    WipeBuildProgress();
+  }
+  
+#  printBuildArray(\@build_flags);
+#  printBuildArray(\@options_flags);
+  
+  SetBuildFlags($build);
+  SetBuildOptions($options);
+  SetOptionDefines($optiondefines);
+  SetFilepathFlags($filepaths);
+  
+#  printHash($build);
+#  printHash($options);
+}
+
+
+1;

mozilla/build/mac/build_scripts/Moz/BuildUtils.pm

@@ -0,0 +1,786 @@
+
+package Moz::BuildUtils;
+
+require 5.004;
+require Exporter;
+
+# Package that contains build util functions specific to the Mozilla build
+# process.
+
+use strict;
+use Exporter;
+
+use Cwd;
+use File::Path;
+use File::Basename;
+
+use Mac::Events;
+use Mac::StandardFile;
+
+use Moz::Moz;
+use Moz::BuildFlags;
+use Moz::MacCVS;
+#use Moz::ProjectXML;  #optional; required for static build only
+
+use vars qw(@ISA @EXPORT);
+
+@ISA      = qw(Exporter);
+@EXPORT   = qw(
+                SetupDefaultBuildOptions
+                SetupBuildRootDir
+                StartBuildModule
+                EndBuildModule
+                GetBinDirectory
+                BuildOneProjectWithOutput
+                BuildOneProject
+                BuildProject
+                BuildProjectClean
+                BuildIDLProject
+                BuildFolderResourceAliases
+                AskAndPersistFile
+                DelayFor
+                TimeStart
+                TimeEnd
+                EmptyTree
+                SetupBuildLog
+                SetBuildNumber
+                SetTimeBomb
+                UpdateConfigHeader
+              );
+
+#//--------------------------------------------------------------------------------------------------
+#// SetupDefaultBuildOptions
+#//--------------------------------------------------------------------------------------------------
+sub SetupDefaultBuildOptions($$$)
+{
+    my($debug, $bin_dir, $config_header_file_name) = @_;
+
+    # Here we set up defaults for the various build flags.
+    # If you want to override any of these, it's best to do
+    # so via the relevant preferences file, which lives in
+    # System Folder:Preferences:Mozilla build prefs:{build prefs file}.
+    # For the name of the prefs file, see the .pl script that you
+    # run to start this build. The prefs files are created when
+    # you run the build, and contain some documentation.
+    
+    #-------------------------------------------------------------
+    # configuration variables that globally affect what is built
+    #-------------------------------------------------------------
+    $main::DEBUG                  = $debug;
+    $main::PROFILE                = 0;
+    $main::RUNTIME                = 0;    # turn on to just build runtime support and NSPR projects
+    $main::GC_LEAK_DETECTOR       = 0;    # turn on to use GC leak detection
+    $main::MOZILLA_OFFICIAL       = 0;    # generate build number
+    $main::LOG_TO_FILE            = 0;    # write perl output to a file
+    
+    #-------------------------------------------------------------
+    # configuration variables that affect the manner of building, 
+    # but possibly affecting the outcome.
+    #-------------------------------------------------------------    
+    $main::ALIAS_SYM_FILES        = $main::DEBUG;
+    $main::CLOBBER_LIBS           = 1;      # turn on to clobber existing libs and .xSYM files before
+                                            # building each project                         
+    # The following two options will delete all dist files (if you have $main::build{dist} turned on),
+    # but leave the directory structure intact.
+    $main::CLOBBER_DIST_ALL       = 1;    # turn on to clobber all aliases/files inside dist (headers/xsym/libs)
+    $main::CLOBBER_DIST_LIBS      = 0;    # turn on to clobber only aliases/files for libraries/sym files in dist
+    $main::CLOBBER_IDL_PROJECTS   = 0;    # turn on to clobber all IDL projects.
+    $main::CLOBBER_PROJECTS       = 0;    # turn on to remove object code from each project before building it
+    
+    $main::UNIVERSAL_INTERFACES_VERSION = 0x0320;
+    
+    #-------------------------------------------------------------
+    # configuration variables that are preferences for the build,
+    # style and do not affect what is built.
+    #-------------------------------------------------------------
+    $main::CLOSE_PROJECTS_FIRST   = 0;
+                                    # 1 = close then make (for development),
+                                    # 0 = make then close (for tinderbox).
+    $main::USE_TIMESTAMPED_LOGS   = 0;
+    $main::USE_BUILD_PROGRESS     = 1;    # track build progress for restartable builds
+    #-------------------------------------------------------------
+    # END OF CONFIG SWITCHES
+    #-------------------------------------------------------------
+    
+    $main::BIN_DIRECTORY = $bin_dir;
+    $main::DEFINESOPTIONS_FILE = $config_header_file_name;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// SetupBuildRootDir
+#//--------------------------------------------------------------------------------------------------
+sub SetupBuildRootDir($)
+{
+    my($rel_path_to_script) = @_;
+
+    my($cur_dir) = cwd();
+    $cur_dir =~ s/$rel_path_to_script$//;
+    chdir($cur_dir) || die "Error: failed to set build root directory to '$cur_dir'.\nYou probably need to put 'mozilla' one level down (in a folder).\n";
+    $main::MOZ_SRC = cwd();
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// StartBuildModule
+#//--------------------------------------------------------------------------------------------------
+sub StartBuildModule($)
+{
+    my($module) = @_;
+
+    print("---- Start of $module ----\n");
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// EndBuildModule
+#//--------------------------------------------------------------------------------------------------
+sub EndBuildModule($)
+{
+    my($module) = @_;
+    WriteBuildProgress($module);
+    print("---- End of $module ----\n");
+}
+
+#--------------------------------------------------------------------------------------------------
+# GetBinDirectory
+#--------------------------------------------------------------------------------------------------
+sub GetBinDirectory()
+{
+    if ($main::BIN_DIRECTORY eq "") { die "Dist directory not set\n"; }
+    return $main::BIN_DIRECTORY;
+}
+
+#--------------------------------------------------------------------------------------------------
+# AskAndPersistFile stores the information about the user pick inside
+# the file $session_storage
+#--------------------------------------------------------------------------------------------------
+sub AskAndPersistFile($)
+{
+    my ($sessionStorage) = @_;
+    my $cvsfile;
+
+    if (( -e $sessionStorage) &&
+        open( SESSIONFILE, $sessionStorage ))
+    {
+    # Read in the path if available
+        $cvsfile = <SESSIONFILE>;
+        chomp $cvsfile;
+        close SESSIONFILE;
+        if ( ! -e $cvsfile )
+        {
+            print STDERR "$cvsfile has disappeared\n";
+            undef $cvsfile;
+        }
+    }
+    unless (defined ($cvsfile))
+    {
+        # make sure that MacPerl is a front process
+        ActivateApplication('McPL');
+        MacPerl::Answer("Could not find your MacCVS session file. Please choose one", "OK");
+        
+        # prompt user for the file name, and store it
+        my $macFile = StandardGetFile( 0, "McvD");  
+        if ( $macFile->sfGood() )
+        {
+            $cvsfile = $macFile->sfFile();
+            # save the choice if we can
+            if ( open (SESSIONFILE, ">" . $sessionStorage))
+            {
+                printf SESSIONFILE $cvsfile, "\n";
+                close SESSIONFILE;
+            }
+            else
+            {
+                print STDERR "Could not open storage file $sessionStorage for saving $cvsfile\n";
+            }
+        }
+    }
+    return $cvsfile;
+}
+
+
+#--------------------------------------------------------------------------------------------------
+# BuildIDLProject
+#
+#--------------------------------------------------------------------------------------------------
+
+sub BuildIDLProject($$)
+{
+    my ($project_path, $module_name) = @_;
+
+    if ($main::CLOBBER_IDL_PROJECTS)
+    {
+        my (@suffix_list) = (".mcp", ".xml");
+        my ($project_name, $project_dir, $suffix) = fileparse($project_path, @suffix_list);
+        if ($suffix eq "") { die "Error: Project, $project_path must end in .xml or .mcp\n"; }
+
+        my($datafolder_path);
+        if ($suffix eq ".xml")
+        {
+            $datafolder_path = $project_dir . "_" . $project_name . " Data:";
+        }
+        else {
+            $datafolder_path = $project_dir . $project_name . " Data:";
+        }
+
+        print STDERR "Deleting IDL data folder: $datafolder_path\n";
+        EmptyTree($datafolder_path);
+    }
+
+    BuildOneProject($project_path,  "headers", 0, 0, 0);
+    BuildOneProject($project_path,  $module_name.".xpt", 1, 0, 1);
+}
+
+
+#--------------------------------------------------------------------------------------------------
+# CreateStaticLibTargets
+#
+#--------------------------------------------------------------------------------------------------
+sub CreateXMLStaticLibTargets($)
+{
+    my($xml_path) = @_;
+
+    my (@suffix_list) = (".xml");
+    my ($project_name, $project_dir, $suffix) = fileparse($xml_path, @suffix_list);
+    if ($suffix eq "") { die "XML munging: $xml_path must end in .xml\n"; }
+
+    #sniff the file to see if we need to fix up broken Pro5-exported XML
+    print "Parsing $xml_path\n";
+    
+    my $ide_version = Moz::ProjectXML::SniffProjectXMLIDEVersion($xml_path);
+    if ($ide_version eq "4.0")
+    {
+        my $new_file = $project_dir.$project_name."2.xml";
+        
+        print "Cleaning up Pro 5 xml to $new_file\n";
+        
+        Moz::ProjectXML::CleanupPro5XML($xml_path, $new_file);
+
+        unlink $xml_path;
+        rename ($new_file, $xml_path);
+    }
+    
+    my $doc = Moz::ProjectXML::ParseXMLDocument($xml_path);
+    my @target_list = Moz::ProjectXML::GetTargetsList($doc);
+    my $target;
+    
+    my %target_hash;    # for easy lookups below
+    foreach $target (@target_list) { $target_hash{$target} = 1; }
+    
+    foreach $target (@target_list)
+    {
+        if ($target =~ /(.+).shlb$/)        # if this is a shared lib target
+        {
+            my $target_base = $1;
+            my $static_target = $target_base.".o";
+            
+            # ensure that this does not exist already
+            if ($target_hash{$static_target}) {
+                print "Static target $static_target already exists in project. Not making\n";
+                next;
+            }
+            
+            print "Making static target '$static_target' from target '$target'\n";
+
+            Moz::ProjectXML::CloneTarget($doc, $target, $static_target);
+            Moz::ProjectXML::SetAsStaticLibraryTarget($doc, $static_target, $static_target);
+        }
+    }
+    
+    print "Writing XML file to $xml_path\n";
+    my $temp_path = $project_dir."_".$project_name.".xml";
+    Moz::ProjectXML::WriteXMLDocument($doc, $temp_path, $ide_version);
+    Moz::ProjectXML::DisposeXMLDocument($doc);
+    
+    if (-e $temp_path)
+    {
+        unlink $xml_path;
+        rename ($temp_path, $xml_path);
+    }
+    else
+    {
+        die "Error: Failed to add new targets to XML project\n";
+    }
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// ProcessProjectXML
+#// 
+#// Helper routine to allow for XML pre-processing. This should read in the XML, process it,
+#// and replace the original file with the processed version.
+#//--------------------------------------------------------------------------------------------------
+sub ProcessProjectXML($)
+{
+    my($xml_path) = @_;
+  
+    # we need to manually load Moz::ProjectXML, becaues not everyone will have the
+    # required perl modules in their distro.
+    my($cur_dir) = cwd();
+    
+    chdir(dirname($0));     # change to the script dir
+    eval "require Moz::ProjectXML";
+    if ($@) { die "Error: could not do Project XML munging because you do not have the correct XML modules installed. Error is:\n################\n $@################"; }
+    
+    chdir($cur_dir);
+    
+    CreateXMLStaticLibTargets($xml_path);
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// Build one project, and make the alias. Parameters are project path, target name, shared  library
+#// name, make shlb alias (boolean), make xSYM alias (boolean), and is component (boolean).
+#//--------------------------------------------------------------------------------------------------
+
+sub BuildOneProjectWithOutput($$$$$$)
+{
+    my ($project_path, $target_name, $output_name, $alias_lib, $alias_xSYM, $component) = @_;
+
+    unless ($project_path =~ m/^$main::BUILD_ROOT.+/) { return; }
+
+    my (@suffix_list) = (".mcp", ".xml");
+    my ($project_name, $project_dir, $suffix) = fileparse($project_path, @suffix_list);
+    if ($suffix eq "") { die "Error: Project, $project_path must end in .xml or .mcp\n"; }
+    
+    my($dist_dir) = GetBinDirectory();
+    
+    # Put libraries in "Essential Files" folder, Components in "Components" folder
+    my($output_dir)  = $component ? "Components:" : "Essential Files:";
+    my($output_path) = $dist_dir.$output_dir;
+
+    if ($main::options{static_build})
+    {      
+      if ($output_name =~ /\.o$/ || $output_name =~ /\.[Ll]ib$/)
+      {
+        $alias_xSYM = 0;
+        $alias_lib  = 1;
+        $output_path = $main::DEBUG ? ":mozilla:dist:static_libs_debug:" : ":mozilla:dist:static_libs:";
+      }
+    }
+
+    # if the flag is on to export projects to XML, export and munge them
+    if ($main::EXPORT_PROJECTS && !($project_path =~ /IDL\.mcp$/))
+    {
+        my $xml_out_path = $project_path;
+
+        $xml_out_path =~ s/\.mcp$/\.xml/;
+
+        # only do this if project is newer?
+        if (! -e $xml_out_path)
+        {
+          ExportProjectToXML(full_path_to($project_path), full_path_to($xml_out_path));
+          ProcessProjectXML($xml_out_path);
+        }
+    }
+        
+    # if the flag is set to use XML projects, default to XML if the file 
+    # is present.
+    if ($main::USE_XML_PROJECTS && !($project_path =~ /IDL\.mcp$/))
+    {
+      my $xml_project_path = $project_dir.$project_name.".xml";
+      if (-e $xml_project_path)
+      {
+        $project_path = $xml_project_path;
+        $suffix = ".xml";
+      }
+    }
+    
+    if ($suffix eq ".xml")
+    {
+        my($xml_path) = $project_path;
+        # Prepend an "_" onto the name of the generated project file so it doesn't conflict
+        $project_path = $project_dir . "_" . $project_name . ".mcp";
+        my($project_modtime) = (-e $project_path ? GetFileModDate($project_path) : 0);
+        my($xml_modtime) = (-e $xml_path ? GetFileModDate($xml_path) : 0);
+
+        if ($xml_modtime > $project_modtime)
+        {
+            print("Importing $project_path from $project_name.xml.\n");
+            unlink($project_path);
+            # Might want to delete the "xxx.mcp Data" dir ???
+            ImportXMLProject(full_path_to($xml_path), full_path_to($project_path));
+        }
+    }
+
+
+    if ($main::CLOBBER_LIBS)
+    {
+        unlink "$project_dir$output_name";              # it's OK if these fail
+        unlink "$project_dir$output_name.xSYM";
+    }
+    
+    DoBuildProject($project_path, $target_name, $main::CLOBBER_PROJECTS);
+    
+    $alias_lib  ? MakeAlias("$project_dir$output_name",      "$output_path") : 0;
+    $alias_xSYM ? MakeAlias("$project_dir$output_name.xSYM", "$output_path") : 0;
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// For compatiblity with existing scripts, BuildOneProject now just calls
+#// BuildOneProjectWithOutput, with the output name and target name identical.
+#// Note that this routine assumes that the target name and the shared libary name
+#// are the same.
+#//--------------------------------------------------------------------------------------------------
+
+sub BuildOneProject($$$$$)
+{
+    my ($project_path, $target_name, $alias_lib, $alias_xSYM, $component) = @_;
+    
+	BuildOneProjectWithOutput($project_path, $target_name, $target_name,
+							  $alias_lib, $alias_xSYM, $component);
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// For compatiblity with existing scripts, BuildProject now just calls
+#// BuildOneProjectWithOutput, with the output name and target name identical.
+#// Note that this routine assumes that the target name and the shared libary name
+#// are the same. No aliases of the output are made.
+#//--------------------------------------------------------------------------------------------------
+
+sub BuildProject($$)
+{
+    my ($project_path, $target_name) = @_;
+    
+	BuildOneProjectWithOutput($project_path, $target_name, $target_name, 0, 0, 0);
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// Identical to BuildProject but clobbers the project before building it.
+#//--------------------------------------------------------------------------------------------------
+
+sub BuildProjectClean($$)
+{
+    my ($project_path, $target_name) = @_;
+    my ($save_clobber_flag) = $main::CLOBBER_PROJECTS;
+    $main::CLOBBER_PROJECTS = 1;
+	BuildOneProjectWithOutput($project_path, $target_name, $target_name, 0, 0, 0);
+	$main::CLOBBER_PROJECTS = $save_clobber_flag;
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// Make resource aliases for one directory
+#//--------------------------------------------------------------------------------------------------
+
+sub BuildFolderResourceAliases($$)
+{
+    my($src_dir, $dest_dir) = @_;
+        
+    # get a list of all the resource files
+    opendir(SRCDIR, $src_dir) || die("can't open $src_dir");
+    my(@resource_files) = readdir(SRCDIR);
+    closedir(SRCDIR);
+    
+    # make aliases for each one into the dest directory
+    print("Placing aliases to all files from $src_dir in $dest_dir\n");
+    for ( @resource_files )
+    {
+        next if $_ eq "CVS";
+        #print("    Doing $_\n");
+        if (-l $src_dir.$_)
+        {
+            print("     $_ is an alias\n");
+            next;
+        }
+        my($file_name) = $src_dir . $_; 
+        MakeAlias($file_name, $dest_dir);
+    }
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// DelayFor
+#//
+#// Delay for the given number of seconds, allowing the script to be cancelled
+#//--------------------------------------------------------------------------------------------------
+
+sub DelayFor($)
+{
+  my($delay_secs) = @_;
+  
+  STDOUT->autoflush(1);
+  
+  my($end_time) = time() + $delay_secs;
+    
+  my($last_time) = 0;
+  my($cur_time) = time();
+  
+  while ($cur_time < $end_time)
+  {
+    $cur_time = time();
+    if ($cur_time > $last_time)
+    {
+      print ".";
+      $last_time = $cur_time;
+    }
+    
+    WaitNextEvent();
+  }
+
+  print "\n";
+  STDOUT->autoflush(0);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// TimeStart
+#//--------------------------------------------------------------------------------------------------
+sub TimeStart()
+{
+    return time();
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// TimeEnd
+#//--------------------------------------------------------------------------------------------------
+sub TimeEnd($$)
+{
+    use integer;
+    
+    my($start_time, $operation_name) = @_;
+    my($end_time) = time();
+    
+    my($tot_sec) = $end_time - $start_time;
+    
+    my($seconds) = $tot_sec;
+    
+    my($hours) = $seconds / (60 * 60);
+    $seconds -= $hours * (60 * 60);
+    
+    my($minutes) = $seconds / 60;
+    $seconds -= $minutes * 60;
+        
+    print "$operation_name took $hours hours $minutes minutes and $seconds seconds\n";
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// Remove all files from a tree, leaving directories intact (except "CVS").
+#//--------------------------------------------------------------------------------------------------
+
+sub EmptyTree($)
+{
+    my ($root) = @_; 
+    #print "EmptyTree($root)\n";
+    opendir(DIR, $root);
+    my $sub;
+    foreach $sub (readdir(DIR))
+    {
+        my $fullpathname = $root.$sub; # -f, -d only work on full paths
+
+        # Don't call empty tree for the alias of a directory.
+        # -d returns true for the alias of a directory, false for a broken alias)
+
+        if (-d $fullpathname)
+        {
+            if (-l $fullpathname)   # delete aliases
+            {
+                unlink $fullpathname;
+                next;
+            }
+            EmptyTree($fullpathname.":");
+            if ($sub eq "CVS")
+            {
+                #print "rmdir $fullpathname\n";
+                rmdir $fullpathname;
+            }
+        }
+        else
+        {
+            unless (unlink $fullpathname) { die "Failed to delete $fullpathname\n"; }
+        }
+    }
+    closedir(DIR);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// Recurse through a directory hierarchy, looking for MANIFEST files.
+#// Currently unused.
+#//--------------------------------------------------------------------------------------------------
+
+sub ScanForManifestFiles($$$$)
+{
+    my($dir, $theme_root, $theme_name, $dist_dir) = @_;
+
+    opendir(DIR, $dir) or die "Cannot open dir $dir\n";
+    my @files = readdir(DIR);
+    closedir DIR;
+
+    my $file;
+
+    foreach $file (@files)
+    {    
+        my $filepath = $dir.":".$file;
+
+        if (-d $filepath)
+        {
+            # print "Looking for MANIFEST files in $filepath\n";        
+            ScanForManifestFiles($filepath, $theme_root, $theme_name, $dist_dir);
+        }
+        elsif ($file eq "MANIFEST")
+        {
+            # print "Doing manifest file $filepath\n";
+
+            # Get the dest path from the first line of the file
+
+            open(MANIFEST, $filepath) || die "Could not open file $file";
+            # Read in the path if available
+            my($dest_line) = <MANIFEST>;
+            chomp $dest_line;
+            close MANIFEST;
+
+            $dest_line =~ s|^#!dest[\t ]+|| || die "No destination line found in $filepath\n";
+
+            my($dest_path) = $dist_dir."chrome:skins:$theme_name:$dest_line";
+            # print " Destination is $dest_path\n";
+
+            InstallResources($filepath, "$dest_path", 0);
+        }
+    }
+}
+
+
+#-----------------------------------------------
+# SetupBuildLog
+#-----------------------------------------------
+sub SetupBuildLog($$)
+{
+    my($logfile_path, $timestamped_log) = @_;
+    
+    my($logdir) = "";
+    my($logfile) = $logfile_path;
+    
+    if ($logfile_path =~ /(.+?:)([^:]+)$/)       # ? for non-greedy match
+    {
+        $logdir = $1;
+        $logfile = $2;
+        
+        mkpath($logdir);
+    }
+    
+    if ($timestamped_log)
+    {
+        #Use time-stamped names so that you don't clobber your previous log file!
+        my $now = localtime();
+        while ($now =~ s@:@.@) {} # replace all colons by periods
+        OpenErrorLog("${logdir}${now}");
+    }
+    else
+    {
+        OpenErrorLog("${logdir}${logfile}");
+    }
+}
+
+#-----------------------------------------------
+# SetBuildNumber
+#-----------------------------------------------
+sub SetBuildNumber($$)
+{
+    my($build_num_file, $files_to_touch) = @_;
+
+    # Make sure we add the config dir to search, to pick up mozBDate.pm
+    # Need to do this dynamically, because this module can be used before
+    # mozilla/config has been checked out.
+    
+    my ($inc_path) = $0;        # $0 is the path to the parent script
+    $inc_path =~ s/:build:mac:build_scripts:.+$/:config/;
+    push(@INC, $inc_path);
+
+    require mozBDate;
+    
+    mozBDate::UpdateBuildNumber($build_num_file, $main::MOZILLA_OFFICIAL);
+   
+    my($file);
+    foreach $file (@$files_to_touch)
+    {
+        print "Writing build number to $file from ${file}.in\n";
+        mozBDate::SubstituteBuildNumber($file, $build_num_file, "${file}.in");
+    }
+}
+
+#-----------------------------------------------
+# SetTimeBomb
+#-----------------------------------------------
+sub SetTimeBomb($$)		
+{
+  my ($warn_days, $bomb_days) = @_;
+  
+  system("perl :mozilla:config:mac-set-timebomb.pl $warn_days $bomb_days");
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// Regenerate a configuration header file if necessary
+#//--------------------------------------------------------------------------------------------------
+sub UpdateConfigHeader($)
+{
+    my($config_path) = @_;
+    
+    my($config, $oldconfig) = ("", "");
+    my($define, $definevalue, $defines);
+    my($k, $l,);
+
+    foreach $k (keys(%main::options))
+    {
+        if ($main::options{$k})
+        {
+            foreach $l (keys(%{$main::optiondefines{$k}}))
+            {
+                $my::defines{$l} = $main::optiondefines{$k}{$l};
+                print "Setting up my::defines{$l}\n";
+            }
+        }
+    }
+
+    my $config_headerfile = current_directory().$config_path;
+    if (-e $config_headerfile)
+    {
+        open(CONFIG_HEADER, "< $config_headerfile") || die "$config_headerfile: $!\n";
+        my($line);
+        while ($line = <CONFIG_HEADER>)
+        {
+            if ($line =~ m/#define\s+([^\s]*)\s+([^\s]*)\s*\n/)
+            {
+                $define = $1;
+                $definevalue = $2;
+                
+                #canonicalize so that whitespace changes are not significant
+                my $canon_value = "#define " . $define . " " . $definevalue . "\n";
+                $oldconfig .= $canon_value;
+                
+                if (exists ($my::defines{$define}) and ($my::defines{$define} == $definevalue))
+                {
+                    delete $my::defines{$define};
+                    $config .= $canon_value;
+                }
+            }
+        }
+        close(CONFIG_HEADER);
+    }
+
+    if (%my::defines)
+    {
+        foreach $k (keys(%my::defines))
+        {
+            $config .= "#define " . $k . " " . $my::defines{$k} . "\n";
+        }
+    }
+
+    my $file_name = basename($config_headerfile);
+    if (($config ne $oldconfig) || (!-e $config_headerfile))
+    {
+        printf("Writing new configuration header $file_name\n");
+        open(CONFIG_HEADER, "> $config_headerfile") || die "$config_headerfile: $!\n";
+        print(CONFIG_HEADER "/* This file is auto-generated based on build options. Do not edit. */\n");
+        print CONFIG_HEADER ($config);
+        close(CONFIG_HEADER);
+
+        MacPerl::SetFileInfo("CWIE", "TEXT", $config_headerfile);
+    }
+    else
+    {
+        printf("Configuration header $file_name is up-to-date\n");
+    }
+}
+
+
+1;
+

mozilla/build/mac/build_scripts/Moz/CodeWarriorLib.pm

@@ -0,0 +1,660 @@
+#!perl
+package Moz::CodeWarriorLib;
+
+=pod
+
+=head1 NAME
+
+CodeWarriorLib - supply interface to CodeWarrior
+
+=head1 SYNOPSIS
+
+	#!perl
+	use CodeWarriorLib;
+	CodeWarriorLib::activate();
+	$had_errors = CodeWarriorLib::build_project(
+		$project_path, $target_name, $recent_errors_file, $clean_build
+	);
+
+=head1 DESCRIPTION
+
+Replaces the AppleScript library I<CodeWarriorLib>.
+
+=over 4
+
+=cut
+
+use strict;
+
+use Cwd;
+use File::Basename;
+
+use Mac::Types;
+use Mac::Events;
+use Mac::AppleEvents;
+use Mac::AppleEvents::Simple;
+use Mac::Processes;
+use Mac::MoreFiles;
+use Mac::StandardFile;
+
+
+use vars qw($VERSION);
+$VERSION = '1.02';
+
+my($app)  = 'CWIE';
+my($scriptDir) = cwd();         # could use $0 for this
+my($ide_loc_file) = "";
+
+# 0 == don't switch CWIE to front app in do_event(), 1 == do switch
+# note: activate() still switches when called
+$Mac::AppleEvents::Simple::SWITCH = 0;
+# $Mac::AppleEvents::Simple::WARN = 1;
+
+# supply your own path to the source here
+#_test('PowerPudgeIV:mozilla:mozilla:');
+
+# If you want to understand the gobbldeygook that's used to build Apple Events,
+# you should start by reading the AEGizmos documentation.
+
+=pod
+
+=item _get_project($full_path)
+
+A private routine returning a reference to the open project with the given name,
+or else the empty string (when that project is not open)
+
+full_path is a string identifying the project to be built and is of the form, 
+e.g., "HD:ProjectFolder:MyProject.mcp".  It must be supplied.
+
+=cut
+
+sub _get_project ($) {
+	my(
+		$full_path, $candidate_projects
+	) = @_;
+	$candidate_projects = _doc_named(basename($full_path, '*'));
+	if ($candidate_projects) {
+		my($cps) = _get_dobj($candidate_projects);
+		my($num) = AECountItems($cps);
+		if ($num) {  # is a list
+			foreach (1 .. AECountItems($cps)) {
+				my($cp) = AEGetNthDesc($cps, $_);
+				if (lc $full_path eq lc _full_path($cp)) {
+					return($cp);
+				}
+			}
+		} else {     # is only one, not a list
+			if (lc $full_path eq lc _full_path($cps)) {
+				return($cps);
+			}
+		}
+	}
+	return;
+}
+
+=pod
+
+=item build_project
+
+Build a selected target of a project, saving any errors to a file, if supplied.
+	
+full_path is a string identifying the project to be built and is of the form, 
+e.g., "HD:ProjectFolder:MyProject.mcp".  It must be supplied.
+
+If target_name is the empty string, the current target of the selected project 
+will be built, else, target_name should be a string matching a target name in 
+the selected project.
+	
+If error_path is the empty string, errors will not be saved to a file,
+else, error_path should be the full path of a file to save error messages into.
+
+=cut
+
+$CodeWarriorLib::CLOSE_PROJECTS_FIRST = 0; # If true we close then make. If false, make then close.
+my $last_project_built = "";
+my $last_project_was_closed = 0;
+
+sub build_project ($;$$$) {
+	my(
+		$full_path, $target_name, $error_path,
+		$remove_object, $p, $project_was_closed, $had_errors
+	) = @_;
+	_close_errors_window();
+
+	if ($CodeWarriorLib::CLOSE_PROJECTS_FIRST && ($last_project_built ne $full_path))
+	{
+		# If we're in "close first" mode, we don't close if the current project
+		# is the same as the previous one.
+		if ($last_project_was_closed) {
+			$p = _get_project($last_project_built);
+			_close($p);
+		}
+		$last_project_built = $full_path;
+		$last_project_was_closed = 0; # now refers to the new project
+	}
+	$project_was_closed = 0;
+	while (1) {
+		$p = _get_project($full_path);
+		if (!$p) {
+			if ($project_was_closed) {
+				print "### Error - request for project document failed after opening\n";
+				die "### possibly CW Pro 4 bug: be sure to close your Find window\n";
+			}
+			$project_was_closed = 1;
+			$last_project_was_closed = 1;
+			_open_file($full_path);
+		} else {
+			last;
+		}
+	}
+
+	$had_errors = 0;
+	if ($target_name eq '') {
+		if ($remove_object) {_remove_object($p)}
+		_build($p);
+	} else {
+		if ($remove_object) {_remove_object($p, $target_name)}
+		_build($p, $target_name);
+	}
+
+	if ($error_path ne '') {
+		_save_errors_window($error_path);
+	}
+	$had_errors = _close_errors_window();
+
+	if (!$CodeWarriorLib::CLOSE_PROJECTS_FIRST)
+	{
+		if ($project_was_closed) {
+			$p = _get_project($full_path);
+			_close($p);
+		}
+	}
+
+	return($had_errors);
+}
+
+=pod
+
+=item appIsRunning()
+
+=cut
+sub _appIsRunning($)
+{
+	my ($appSignature) = @_;
+	my ($psi);
+	my ($found) = 0;
+	my ($appPSN);
+
+	foreach $psi (values(%Process))
+	{
+		if ($psi->processSignature() eq $appSignature)
+		{
+			$appPSN = $psi->processNumber();
+			$found = 1;
+            last;
+		}
+	}
+	
+	return $found;
+}
+
+=pod
+
+=item appIsFrontmost()
+
+=cut
+sub _appIsFrontmost($)
+{
+	my ($appSignature) = @_;
+	my ($psi);
+	my ($found) = 0;
+	my ($appPSN);
+
+	foreach $psi (values(%Process))
+	{
+		if ($psi->processSignature() eq $appSignature)
+		{
+			$appPSN = $psi->processNumber();
+			$found = 1;
+            last;
+		}
+	}
+	
+	return (GetFrontProcess() == $appPSN);
+}
+
+
+=pod
+
+=item activate()
+
+Launches CodeWarrior and brings it to the front.
+
+Once found, path will be saved in $idepath_file for future reference.
+Edit or delete this file to change the location of the IDE.  If app is
+moved, C<activate()> will prompt for a new location.
+
+First looks for an open CodeWarrior app.  Second, tries to open previously
+saved location in ':idepath.txt'.  Third, tries to find it and allow user
+to choose it with Navigation Services (if present).  Fourth, uses good old
+GUSI routines built-in to MacPerl for a Choose Directory dialog box.
+
+=cut
+
+sub activate ($) {
+
+    $ide_loc_file = $_[0];     # save in global
+        
+	my($filepath, $appath, $psi) = ($ide_loc_file);
+
+	foreach $psi (values(%Process)) {
+		if ($psi->processSignature() eq $app) {
+			$appath = $psi->processAppSpec();
+			_save_appath($filepath, $appath);
+			last;
+		}
+	}
+
+	if (!$appath || !-x $appath) {
+		$appath = _read_appath($filepath);
+	}
+	
+	if (!$appath || ! -x $appath)
+	{
+		# make sure that MacPerl is a front process
+		#ActivateApplication('McPL');
+		MacPerl::Answer("Please locate the CodeWarrior application.", "OK");
+		
+		# prompt user for the file name, and store it
+		my $macFile = StandardGetFile( 0, "APPL");
+		if ( $macFile->sfGood() )
+		{
+			$appath = $macFile->sfFile();
+		}
+		else
+		{
+			die "Operation canceled\n";
+		}
+	
+#		if (eval {require Mac::Navigation}) {
+#			my($options, $nav);
+#			Mac::Navigation->import();
+#			$options = NavGetDefaultDialogOptions();
+#			$options->message('Where is CodeWarrior IDE?');
+#			$options->windowTitle('Find CodeWarrior IDE');
+#			$nav = NavChooseObject($Application{$app}, $options);
+#			die "CodeWarrior IDE not found.\n" if (!$nav || !$nav->file(1));
+#			$appath = $nav->file(1);
+#		} else {
+#			local(*D);
+#			my $cwd = `pwd`;
+#			$appath = _get_folder(
+#                               'Where is the CW IDE folder?',
+#				dirname($Application{$app})
+#			);
+#			die "CodeWarrior IDE not found.\n" if !$appath;
+#			opendir(D, $appath) or die $!;
+#			chdir($appath);
+#			foreach my $file (sort readdir (D)) {
+#				my(@app) = MacPerl::GetFileInfo($file);
+#				if ($app[0] && $app[1] &&
+#					$app[1] eq 'APPL' && $app[0] eq $app
+#				) {
+#					$appath .= $file;
+#					last;
+#				}
+#			}
+#			chomp($cwd);
+#			chdir($cwd);
+#		}
+		_save_appath($filepath, $appath);
+	}
+
+	my($lp) = LaunchParam->new(
+		launchAppSpec => $appath,
+		launchControlFlags => launchContinue() + launchNoFileFlags()
+	);
+	
+	unless (LaunchApplication($lp)) {
+		unlink($filepath);
+		die $^E;
+	}
+	
+	# wait for CodeWarrior to show up in the list of processes
+	while (!_appIsRunning('CWIE'))
+	{
+		WaitNextEvent();
+	}
+
+	# wait for CodeWarrior to come to the front
+	while (!_appIsFrontmost('CWIE'))
+	{
+		WaitNextEvent();
+	}
+}
+
+=pod
+
+=item getCodeWarriorPath()
+
+Returns a file path relative to the CodeWarrior folder
+
+=cut
+
+sub getCodeWarriorPath($)
+{
+    my($subfolder)=@_;
+    
+    my($app_path) = _read_appath($ide_loc_file);
+    if ($app_path eq "") { die "Error: Failed to get CodeWarrior IDE path\n"; }
+    
+    my($codewarrior_root) = $app_path;
+    $codewarrior_root =~ s/[^:]*$//;
+    return ($codewarrior_root . $subfolder);
+}
+
+
+=pod
+
+=item getCodeWarriorIDEName()
+
+Returns the name of the CodeWarrior application
+
+=cut
+
+sub getCodeWarriorIDEName()
+{
+    my($subfolder)=@_;
+
+    my($app_path) = _read_appath($ide_loc_file);
+    if ($app_path eq "") { die "Error: Failed to get CodeWarrior IDE path\n"; }
+
+    my(@codewarrior_path) = split(/:/, $app_path);
+    return pop(@codewarrior_path);
+}
+
+
+=pod
+
+=item quit()
+
+Quits CodeWarrior.
+
+=cut
+
+sub quit() {
+
+	$last_project_built = "";
+	$last_project_was_closed = 0;
+
+	my($evt) = do_event(qw/aevt quit/, $app);
+}
+
+
+sub _build ($;$) {
+	my($evt);
+	if ($_[1]) {
+		my($prm) =
+			q"'----':obj {form:name, want:type(TRGT), seld:TEXT(@), from:" .
+			AEPrint($_[0]) . '}';
+		$evt = do_event(qw/CWIE MAKE/, $app, $prm, $_[1]);
+	} else {
+		my($prm) = q"'----':" . AEPrint($_[0]);
+		$evt = do_event(qw/CWIE MAKE/, $app, $prm);
+	}
+}
+
+sub _remove_object ($;$) {
+	my($evt);
+	if ($_[1]) {
+		my($prm) =
+			q"'----':obj {form:name, want:type(TRGT), seld:TEXT(@), from:" .
+			AEPrint($_[0]) . '}';
+		$evt = do_event(qw/CWIE RMOB/, $app, $prm, $_[1]);
+	} else {
+		my($prm) = q"'----':" . AEPrint($_[0]);
+		$evt = do_event(qw/CWIE RMOB/, $app, $prm);
+	}
+}
+
+sub _open_file ($) {
+	my($prm) =
+		q"'----':obj {form:name, want:type(alis), " .
+		q"seld:TEXT(@), from:'null'()}";
+
+	do_event(qw/aevt odoc/, $app, $prm, $_[0]);
+}
+
+sub import_project ($$) {
+	my($xml_file, $project_path) = @_;
+	
+	my($prm) = "kocl:type(PRJD), rtyp:TEXT(@), data:TEXT(@), &subj:'null'()";
+	
+	my($evt) = do_event(qw/core crel/, $app, $prm, $project_path, $xml_file);    
+	my($result) = _get_event_result($evt);
+	
+	if ($result eq "") {
+		_close(_get_project($project_path));
+	}
+	return $result;
+}
+
+sub export_project ($$) {
+	my($project_path, $xml_out_path) = @_;
+	my($p, $project_was_closed);
+	
+	$project_was_closed = 0;
+	while (1) {
+		$p = _get_project($project_path);
+		if (!$p) {
+			if ($project_was_closed) {
+				print "### Error - request for project document failed after opening\n";
+				die "### possibly CW bug: be sure to close your Find window\n";
+}
+			$project_was_closed = 1;
+			_open_file($project_path);
+		} else {
+			last;
+		}
+	}
+
+    # avoid problems with the Project Messages window
+    _close_named_window("Project Messages");
+    
+	my($prm) =
+		q"'----':obj {form:indx, want:type(PRJD), " .
+		q"seld:1, from:'null'()}, kfil:TEXT(@)";
+
+	my($evt) = do_event(qw/CWIE EXPT/, $app, $prm, $xml_out_path);    
+	
+	if ($project_was_closed) {
+		$p = _get_project($project_path);
+		_close($p);
+	}
+	
+	return _get_event_result($evt);
+}
+
+sub _doc_named ($) {
+	my($prm) =
+		q"'----':obj {form:test, want:type(docu), from:'null'(), " .
+		q"seld:cmpd{relo:'=   ', 'obj1':obj {form:prop, want:type" .
+		q"(prop), seld:type(pnam), from:'exmn'()}, 'obj2':TEXT(@)}}";
+
+	my($evt) = do_event(qw/core getd/, $app, $prm, $_[0]);
+	return($evt->{REPLY} eq 'aevt\ansr{}' ? undef : $evt);
+}
+
+sub _full_path ($) {
+	my($obj) = $_[0];
+	my($prm) =
+		q"'----':obj {form:prop, want:type(prop), seld:type(FILE), " .
+		q"from:" . AEPrint($_[0]) . q"}, rtyp:type(TEXT)";
+	my($evt) = do_event(qw/core getd/, $app, $prm);
+
+	return MacPerl::MakePath(
+		MacUnpack('fss ', (
+			AEGetParamDesc($evt->{REP}, keyDirectObject()))->data()->get()
+		)
+	);
+}
+
+sub _save_errors_window ($) {
+	my($prm) = 
+		q"'----':obj {form:name, want:type(alis), seld:TEXT(@), from:'null'()}";
+	do_event(qw/MMPR SvMs/, $app, $prm, $_[0]);
+}
+
+
+sub _close_errors_window () {
+    return _close_named_window('Errors & Warnings');
+}
+
+
+sub _close_named_window ($) {
+    my($window_name) = @_;
+    
+	my($prm) =
+		q"'----':obj {form:name, want:type(cwin), " .
+		q"seld:TEXT(@), from:'null'()}";
+
+	my($evt) = do_event(qw/core clos/, $app, $prm, $window_name);
+	return($evt->{REPLY} eq 'aevt\ansr{}' ? 1 : 0);
+}
+
+sub _close () {
+	my($prm) = q"'----':" . AEPrint($_[0]);
+	do_event(qw/core clos/, $app, $prm);
+}
+
+sub _get_dobj ($) {
+	return(AEGetParamDesc($_[0]->{REP}, keyDirectObject()));
+}
+
+sub _get_folder ($$) {
+    require 'GUSI.ph';
+    my($prompt, $default) = @_;
+    MacPerl::Choose(
+        GUSI::AF_FILE(), 0, $prompt, '',
+        GUSI::CHOOSE_DIR() + ($default ? &GUSI::CHOOSE_DEFAULT : 0),
+        $default
+    );
+}
+
+sub _get_event_result ($)
+{
+    my($evt) = @_;
+
+    my($result) = $evt->{ERROR};
+    
+    if ( $result eq "" && $evt->{ERRNO} != 0 )
+    {
+        $result = "unknown error (".$evt->{ERRNO}.")";
+    }
+    
+    return $result;
+}
+
+
+sub _save_appath ($$) {
+
+	my($cwd) = cwd();	# remember the current working dir
+	chdir($scriptDir);	# change dir to the script dir
+
+	local(*F);
+	open(F, '>' . $_[0]) or die $!;
+	print F $_[1];
+	close(F);
+		
+	chdir($cwd);		# restore the cwd
+}
+
+sub _read_appath ($) {
+
+	my($filepath) = @_;
+
+	my($cwd) = cwd();	# remember the current working dir
+	chdir($scriptDir);	# change dir to the script dir
+	
+	if (! -e $filepath) {
+		return "";
+	}
+
+	local(*F);
+	open(F, $filepath);
+	my($appath) = <F>;
+	close(F);
+		
+	chdir($cwd);		# restore the cwd
+	return($appath);
+}
+
+
+sub _test ($) {
+	activate($ide_loc_file);
+	my($path) = $_[0];
+	build_project(
+	  "${path}modules:xml:macbuild:XML.mcp", '',
+	  "${path}build:mac:Mozilla.BuildLog.part"
+	);
+}
+
+1;
+
+=pod
+
+=back
+
+=head1 HISTORY
+
+=over 4
+
+=item v1.02, September 23, 1998
+
+Made fixes in finding and saving location of CodeWarrior IDE.
+
+=item v1.01, June 1, 1998
+
+Made fixes to C<chdir()> in C<activate()>, made C<activate()> more robust 
+in finding CodeWarrior IDE, added global variable to NOT switch to IDE
+for each sent event, a few other fixes.
+
+=item v1.00, May 30, 1998
+
+First shot
+
+=back
+
+
+=head1 AUTHORS
+
+Chris Nandor F<E<lt>pudge@pobox.comE<gt>>, and the author of the
+original I<CodeWarriorLib>, Scott Collins F<E<lt>scc@netscape.comE<gt>>.
+
+=head1 SEE ALSO
+
+BuildProject L<Moz>.
+
+=head1 COPYRIGHT
+
+The contents of this file are subject to the Netscape Public
+License Version 1.1 (the "License"); you may not use this file
+except in compliance with the License. You may obtain a copy of
+the License at http://www.mozilla.org/NPL/
+
+Software distributed under the License is distributed on an "AS
+IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+implied. See the License for the specific language governing
+rights and limitations under the License.
+
+The Original Code is Mozilla Communicator client code, released
+March 31, 1998.
+
+The Initial Developer of the Original Code is Netscape
+Communications Corporation. Portions created by Netscape are
+Copyright (C) 1998-1999 Netscape Communications Corporation. All
+Rights Reserved.
+
+Contributor(s): 
+
+=cut

mozilla/build/mac/build_scripts/Moz/Jar.pm

@@ -0,0 +1,573 @@
+#!perl -w
+package Moz::Jar;
+
+#
+# Module for creating jar files, either using a jar manifest, or
+# simply jarring up folders on disk.
+#
+
+require 5.004;
+require Exporter;
+
+use strict;
+use Archive::Zip;
+use File::Path;
+
+use Mac::Files;
+
+use Moz::Moz;
+
+use vars qw( @ISA @EXPORT );
+
+@ISA        = qw(Exporter);
+@EXPORT     = qw(
+                    CreateJarFileFromDirectory
+                    CreateJarFromManifest
+                    WriteOutJarFiles
+                    SanityCheckJarOptions
+                );
+
+
+#-------------------------------------------------------------------------------
+# Add the contents of a directory to the zip file
+#
+#-------------------------------------------------------------------------------
+sub _addDirToJar($$$$)
+{
+    my($dir, $jar_root, $zip, $compress) = @_;
+
+    opendir(DIR, $dir) or die "Error: Cannot open dir $dir\n";
+    my @files = readdir(DIR);
+    closedir DIR;
+    
+    my $unix_jar_root = $jar_root;
+    $unix_jar_root =~ s|:|/|g;       # colon to slash conversion
+    
+    my $file;
+    
+    foreach $file (@files)
+    {        
+        my $filepath = $dir.":".$file;
+        
+        if (-d $filepath)
+        {
+            print "Adding files to jar from $filepath\n";            
+            _addDirToJar($filepath, $jar_root, $zip, $compress);
+        }
+        else
+        {
+            my $member = Archive::Zip::Member->newFromFile($filepath);
+            die "Error: Failed to create zip file member $filepath\n" unless $member;
+            
+            my $unixName = $filepath;
+            $unixName =~ s|:|/|g;               # colon to slash conversion
+            $unixName =~ s|^$unix_jar_root||;   # relativise
+            
+            $member->fileName($unixName);
+            
+            # print "Adding $file as $unixName\n";
+            
+            if ($compress) {
+                $member->desiredCompressionMethod(Archive::Zip::COMPRESSION_DEFLATED);            
+            } else {
+                $member->desiredCompressionMethod(Archive::Zip::COMPRESSION_STORED);
+            }
+            
+            $zip->addMember($member);
+        }
+    }
+}
+
+#-------------------------------------------------------------------------------
+# Add the contents of a directory to the zip file
+#
+#-------------------------------------------------------------------------------
+
+sub CreateJarFileFromDirectory($$$)
+{
+    my($srcdir, $jarpath, $compress) = @_;
+
+    my $zip = Archive::Zip->new();
+
+    _addDirToJar($srcdir, $srcdir, $zip, $compress);
+
+    print "Saving zip file...\n";
+    my $status = $zip->writeToFileNamed($jarpath);
+    if ($status == 0) {
+        print "Zipping completed successfully\n";
+    } else {
+        print "Error saving zip file\n";
+    }
+    
+    # set the file type/creator to something reasonable
+    MacPerl::SetFileInfo("ZIP ", "ZIP ", $jarpath);
+}
+
+
+#-------------------------------------------------------------------------------
+# printZipContents
+# 
+#-------------------------------------------------------------------------------
+sub printZipContents($)
+{
+    my($zip) = @_;
+
+    my(@members) = $zip->memberNames();
+    
+    print "Zip contains:\n";
+    
+    my($member);
+    foreach $member (@members)
+    {
+        print "  $member\n";
+    }
+}
+
+
+#-------------------------------------------------------------------------------
+# safeSaveJarFile
+# 
+# Archive::Zip has a problem where you cannot save a zip file on top of
+# an existing zip file that it has open, because it holds references
+# into that zip. So we have to save to a temp file, then do a swap.
+# 
+# Note that the zip will become invalid after this operation.
+# If you want to do further operations on it, you'll have to reread it.
+#-------------------------------------------------------------------------------
+sub safeSaveJarFile($$)
+{
+    my($zip, $full_dest_path) = @_;
+    
+    my($temp_file_name) = $full_dest_path."_temp";
+
+    ($zip->writeToFileNamed($temp_file_name) == Archive::Zip::AZ_OK) || die "Error: died writing jar to temp file $temp_file_name\n";
+    
+    unlink $full_dest_path;
+    
+    (rename $temp_file_name, $full_dest_path) || die "Error: Failed to rename $temp_file_name\n";
+    
+    MacPerl::SetFileInfo("ZIP ", "ZIP ", $full_dest_path);
+}
+
+
+#-------------------------------------------------------------------------------
+# addToJarFile
+# 
+# Add a file to a jar file
+#
+# Parameters:
+#   1. Jar ID. Unix path of jar file inside chrome.
+#   2. Abs path to jar.mn file (i.e. source)    (mac breaks)
+#   3. File source, relative to jar.mn path     (mac breaks)
+#   4. Abs path to the resulting .jar file      (mac breaks)
+#   5. Relative file path within the jar        (unix breaks)
+#   6. Reference to hash of jar files
+#
+#-------------------------------------------------------------------------------
+
+sub addToJarFile($$$$$$$)
+{
+    my($jar_id, $jar_man_dir, $file_src, $jar_path, $file_jar_path, $override, $jars) = @_;
+
+    # print "addToJarFile with:\n  $jar_man_dir\n  $file_src\n  $jar_path\n  $file_jar_path\n";
+
+    unless ($jar_path =~ m/(.+:)([^:]+)$/) { die "Error: Bad jar path $jar_path\n"; }
+    
+    my($target_dir) = $1;
+    my($jar_name) = $2;
+
+    $target_dir =~ s/[^:]+$//;
+    
+    # print "¥ $target_dir $jar_name\n";
+
+    # find the source file
+    my($src) = $jar_man_dir.":".$file_src;
+    if ((!-e $src) && ($file_src =~ m/.+:([^:]+)$/))    # src does not exist. Fall back to looking for src in jar.mn dir
+    {
+        $file_src = $1;
+        $src = $jar_man_dir.":".$file_src;
+        
+        if (!-e $src) {
+            die "Error: Can't find chrome file $src\n";
+        }
+    }
+    
+    if ($main::options{chrome_jars})
+    {
+        my($zip) = $jars->{$jar_id};
+        unless ($zip) { die "Error: Can't find Zip entry for $jar_id\n"; }
+        
+        # print "Adding $file_src to jar file $jar_path at $file_jar_path\n";
+        my($member) = Archive::Zip::Member->newFromFile($src);
+        unless ($member) { die "Error: Failed to create zip file member $src\n"; }
+
+        $member->fileName($file_jar_path);    
+    
+        my($compress) = 1;
+        if ($compress) {
+            $member->desiredCompressionMethod(Archive::Zip::COMPRESSION_DEFLATED);            
+            $member->desiredCompressionLevel(Archive::Zip::COMPRESSION_LEVEL_DEFAULT);   # defaults to 6
+        } else {
+            $member->desiredCompressionMethod(Archive::Zip::COMPRESSION_STORED);
+        }
+
+        my($old_member) = $zip->memberNamed($file_jar_path);
+        
+        if ($override)
+        {
+            if ($old_member)
+            {
+                # print "Overriding $file_jar_path in jar file $jar_id\n";
+                # need to compare mod dates or use the + here
+                $zip->removeMember($old_member);
+            }
+        
+            $zip->addMember($member);
+        }
+        else
+        {
+            if ($old_member)
+            {
+                #compare dates here
+                my($member_moddate) = $old_member->lastModTime();
+                my($file_moddate) = GetFileModDate($src);
+            
+                if ($file_moddate > $member_moddate)
+                {
+                    print "Updating older file $file_jar_path in $jar_id\n";
+                    $zip->removeMember($old_member);
+                    $zip->addMember($member);
+                }
+                else
+                {
+                    print "File $file_jar_path in $jar_id is more recent. Not updating.\n";
+                }
+            }
+            else
+            {
+                $zip->addMember($member);
+            }
+        }
+    }
+    
+    if ($main::options{chrome_files})  # we install raw files too
+    {
+        my($rel_path) = $file_jar_path;
+        $rel_path =~ s|/|:|g;       # slash to colons
+        
+        my($dir_name) = $jar_name;
+        $dir_name =~ s/\.jar$//;
+        
+        my($dst) = $target_dir.$dir_name.":".$rel_path;
+                
+        # print "Aliassing $src\n to\n$dst\n";        
+        if ($override)
+        {
+            unlink $dst;
+        MakeAlias($src, $dst);      # don't check errors, otherwise we fail on replacement
+    }
+        else
+        {
+            if (-e $dst)
+            {
+                #compare dates here
+                my($dst_moddate) = GetFileModDate($dst);
+                my($file_moddate) = GetFileModDate($src);
+            
+                if ($file_moddate > $dst_moddate)
+                {
+                    print "Updating older file $rel_path in $dir_name\n";
+                    unlink $dst;
+                    MakeAlias($src, $dst);
+                }
+                else
+                {
+                    print "File $file_jar_path in $jar_id is more recent. Not updating.\n";
+                }
+            
+            }
+            else
+            {
+                MakeAlias($src, $dst);
+            }
+        }
+        
+    }
+}
+
+
+#-------------------------------------------------------------------------------
+# setupJarFile
+# 
+# setup a zip for writing
+#-------------------------------------------------------------------------------
+
+sub setupJarFile($$$)
+{
+    my($jar_id, $dest_path, $jar_hash) = @_;
+
+    # print "Creating jar file $jar_id at $jar_path\n";
+    
+    my($jar_file) = $jar_id;
+    $jar_file =~ s|/|:|g;           # slash to colons
+    my($full_jar_path) = full_path_to($dest_path.":".$jar_file);
+
+    if ($main::options{chrome_jars})
+    {
+        my($zip) = $jar_hash->{$jar_id};
+        if (!$zip)      # if we haven't made it already, do so
+        {
+	        my($zip) = Archive::Zip->new();
+	        $jar_hash->{$jar_id} = $zip;
+
+            # does the jar file exist already? If so, read it in
+            if (-e $full_jar_path)
+            {
+                print "Reading in jar file $jar_id\n";
+                if ($zip->read($full_jar_path) != Archive::Zip::AZ_OK) { die "Error: Failed to re-read $full_jar_path\n"; }
+                
+                # printZipContents($zip);
+            }
+
+        }
+    }
+    else
+    {
+        # installing files.
+        # nothing to do. MakeAlias creates dirs as needed.
+
+	    # add this jar to the list
+	    $jar_hash->{$jar_id} = 1;
+    }
+}
+
+
+#-------------------------------------------------------------------------------
+# closeJarFile
+# 
+# We're done with this jar file _for this jar.mn_. We may add more entries
+# to it later, so keep it open in the hash.
+#-------------------------------------------------------------------------------
+sub closeJarFile($$)
+{
+    my($jar_path, $jar_hash) = @_;
+
+    # print "Closing jar file $jar_path\n";
+
+    if ($main::options{chrome_jars})
+    {
+    
+    }
+    else
+    {
+        # installing files.
+        # nothing to do
+    }
+}
+
+
+#-------------------------------------------------------------------------------
+# WriteOutJarFiles
+# 
+# Now we dump out the jars
+#-------------------------------------------------------------------------------
+sub WriteOutJarFiles($$)
+{
+    my($chrome_dir, $jars) = @_;
+
+    unless ($main::options{chrome_jars}) { return; }
+    
+    my($full_chrome_path) = full_path_to($chrome_dir);
+
+    my($key);
+    foreach $key (keys %$jars)
+    {
+        my($zip) = $jars->{$key};
+        
+        my($rel_path) = $key;
+        $rel_path =~ s/\//:/g;
+        
+        my($output_path) = $full_chrome_path.":".$rel_path;
+        
+        print "Writing zip file $key to $output_path\n";
+
+        # ensure the target dirs exist
+        my($path) = $output_path;
+        $path =~ s/[^:]+$//;
+        mkpath($path);
+        
+        # unlink $output_path;        # remove any existing jar
+        safeSaveJarFile($zip, $output_path);
+        # $zip is invalid after this operation, so nuke it here
+        $jars->{$key} = 0;
+    }
+}
+
+
+#-------------------------------------------------------------------------------
+# registerChromePackage
+# 
+# Enter a chrome package into the installed-chrome.txt file
+#-------------------------------------------------------------------------------
+sub registerChromePackage($$$$$$)
+{
+    my($jar_file, $file_path, $chrome_dir, $jar_hash, $chrome_type, $pkg_name) = @_;
+
+    my($manifest_subdir) = $jar_file;
+    $manifest_subdir =~ s/:/\//g;
+    
+    my($chrome_entry);
+    
+    if ($main::options{use_jars}) {
+        $chrome_entry = "$chrome_type,install,url,jar:resource:/chrome/$manifest_subdir!/$chrome_type/$pkg_name";
+    } else {
+        $manifest_subdir =~ s/\.jar$//;
+        $chrome_entry = "$chrome_type,install,url,resource:/chrome/$manifest_subdir/$chrome_type/$pkg_name";
+    }
+
+    # print "Entering $chrome_entry in installed-chrome.txt\n";
+    
+    # ensure chrome_dir exists
+    mkpath($chrome_dir);
+    
+    my($inst_chrome) = ${chrome_dir}.":installed-chrome.txt";
+    
+    if (open(CHROMEFILE, "<$inst_chrome")) {
+        while (<CHROMEFILE>) {
+            chomp;
+            if ($_ eq $chrome_entry) {
+                # $chrome_entry already appears in installed-chrome.txt file
+                # just update the mod date
+                my $now = time;
+                utime($now, $now, $inst_chrome) || die "Error: Couldn't touch $inst_chrome";
+                print "+++ updating chrome $inst_chrome\n+++\t\t$chrome_entry\n";
+                close(CHROMEFILE) || die "Error: can't close $inst_chrome: $!";
+                return 0;
+            }
+        }
+        close(CHROMEFILE) || die "Error: can't close $inst_chrome: $!";
+    }
+    open(CHROMEFILE, ">>${inst_chrome}") || die "Error: Failed to open $inst_chrome\n";
+    print(CHROMEFILE "${chrome_entry}\n");
+    close(CHROMEFILE) || die "Error: Failed to close $inst_chrome\n";
+    print "+++ adding chrome $inst_chrome\n+++\t\t$chrome_entry\n";
+}
+
+#-------------------------------------------------------------------------------
+# Create or add to a jar file from a jar.mn file.
+# Both arguments are relative to the mozilla root dir.
+#
+#
+#-------------------------------------------------------------------------------
+sub CreateJarFromManifest($$$)
+{
+    my($jar_man_path, $dest_path, $jars) = @_;
+    
+    if ($main::options{chrome_jars}) {
+        print "Jarring from $jar_man_path\n";
+    }
+    if ($main::options{chrome_files}) {
+        print "Installing files from $jar_man_path\n";
+    }
+
+    $jar_man_path = full_path_to($jar_man_path);
+    $dest_path = full_path_to($dest_path);
+
+    # if the jars hash is empty, nuke installed-chrome.txt
+    if (! scalar(%$jars))
+    {
+        print "Nuking installed-chrome.txt\n";
+	    my($installed_chrome) = $dest_path.":installed-chrome.txt";
+	    # unlink $installed_chrome;
+    }
+    
+    my $jar_man_dir = "";
+    my $jar_man_file = "";
+    
+    if ($jar_man_path =~ /(.+):([^:]+)$/)
+    {
+        $jar_man_dir = $1;      # no trailing :
+        $jar_man_file = $2;
+    }
+
+    # Keep a hash of jar files, keyed on relative jar path (e.g. "packages/core.jar")
+    # Entries are open Archive::Zips (if zipping), and installed-chrome entries.
+    
+    my($jar_id) = "";       # Current foo/bar.jar from jar.mn file
+    my($jar_file) = "";     # relative path to jar file (from $dest_path), with mac separators
+    my($full_jar_path);
+    
+    open(FILE, "<$jar_man_path") || die "Error: could not open \"$jar_man_path\": $!";
+    while (<FILE>)
+    {
+        my($line) = $_;
+        chomp($line);
+        
+        # print "$line\n";
+        
+        if ($line =~ /^\s*\#.*$/) {     # skip comments
+            next;
+        }
+        
+        if ($line =~/^([\w\d.\-\_\\\/]+)\:\s*$/)                                  # line start jar file entries
+        {
+            $jar_id = $1;
+            $jar_file = $jar_id;
+            $jar_file =~ s|/|:|g;           # slash to colons
+            $full_jar_path = $dest_path.":".$jar_file;
+                        
+            setupJarFile($jar_id, $dest_path, $jars);
+
+        }
+        elsif ($line =~ /^(\+?)\s+([\w\d.\-\_\\\/]+)\s*(\([\w\d.\-\_\\\/]+\))?$\s*/)     # jar file entry
+        {
+            my($override) = ($1 eq "+");
+            my($file_dest) = $2;
+            my($file_src) = $3;
+ 
+            if ($file_src) {  
+                $file_src = substr($file_src, 1, -1);      #strip the ()
+            } else {
+                $file_src = $file_dest;
+            }
+            
+            $file_src =~ s|/|:|g;
+            
+            if ($jar_file ne "")    # if jar is open, add to jar
+            {
+                if ($file_dest =~ /([\w\d.\-\_]+)\/([\w\d.\-\_\\\/]+)contents.rdf/)
+                {
+                    my $chrome_type = $1;
+                    my $pkg_name = $2;
+                    registerChromePackage($jar_file, $file_dest, $dest_path, $jars, $chrome_type, $pkg_name);
+                }
+                
+                addToJarFile($jar_id, $jar_man_dir, $file_src, $full_jar_path, $file_dest, $override, $jars);
+            }
+            else
+            {
+                die "Error: bad jar.mn format at $line\n";
+            }
+        }
+        elsif ($line =~ /^\s*$/ )                                               # blank line
+        {
+            if ($jar_file ne "")    #if a jar file is open, close it
+            {
+                closeJarFile($full_jar_path, $jars);
+                
+                $jar_file = "";
+                $full_jar_path = "";
+            }
+        }
+    }
+    
+    close(FILE);
+
+    if ($jar_file ne "")    #if a jar file is open, close it
+    {
+        closeJarFile($full_jar_path, $jars);
+    }
+
+}
+
+1;

mozilla/build/mac/build_scripts/Moz/MacCVS.pm

@@ -0,0 +1,228 @@
+#!perl -w
+package Moz::MacCVS;
+
+# package Mac::Apps::MacCVS; this should really be the name of the package
+# but due to our directory hierarchy in mozilla, I am not doing it
+
+require 5.004;
+require Exporter;
+
+use strict;
+use Exporter;
+
+use vars qw($VERSION @ISA @EXPORT);
+
+use Cwd;
+
+use File::Basename;
+
+use Mac::StandardFile;
+use Mac::AppleEvents;
+use Mac::AppleEvents::Simple;
+
+@ISA        = qw(Exporter);
+@EXPORT     = qw(new describe checkout update);
+$VERSION = "1.00";
+
+# If you want to understand the gobbldeygook that's used to build Apple Events,
+# you should start by reading the AEGizmos documentation.
+
+
+# Architecture:
+# cvs session object:
+# name - session name
+# session_file - session file
+# 
+# 
+
+my($last_error) = 0;
+my($gAppSig)    = 'Mcvs';   # MacCVS Pro
+
+#
+# utility routines
+#
+
+
+sub _checkForEventError($)
+{
+  my($evt) = @_;
+
+  if ($evt->{ERRNO} != 0)
+  {
+    print STDERR "Error. Script returned '$evt->{ERROR} (error $evt->{ERRNO})\n";
+    $last_error = $evt->{ERRNO};
+    return 0;
+  }
+  
+  return 1; # success
+}
+
+
+#
+# Session object methods
+#
+
+sub new
+{
+  my ( $proto, $session_file) = @_;
+  my $class = ref($proto) || $proto;
+  my $self = {};
+
+  if ( defined($session_file) && ( -e $session_file) )
+  {
+    $self->{"name"} = basename( $session_file );
+    $self->{"session_file"} = $session_file;
+    bless $self, $class;
+    return $self;
+  }
+  else
+  {
+    print STDERR "MacCVS->new cvs file < $session_file > does not exist\n";
+    return;
+  }
+}
+
+# makes sure that the session is open
+# assertSessionOpen()
+# returns 1 on success
+sub assertSessionOpen()
+{
+  my ($self) = shift;
+
+  $last_error = 0;
+
+  my($prm) =
+    q"'----':obj {form:name, want:type(alis), seld:TEXT(@), from:'null'()}";
+
+  my($evt) = do_event(qw/aevt odoc/, $gAppSig, $prm, $self->{session_file});
+  return _checkForEventError($evt);
+}
+
+# prints the cvs object, used mostly for debugging
+sub describe
+{
+  my($self) = shift;
+  $last_error = 0;
+  print "MacCVS:: name: ", $self->{name}, " session file: ", $self->{session_file}, "\n";
+}
+
+# checkout( self, module, revision, date)
+# MacCVS checkout command
+# returns 1 on success.
+sub checkout()
+{
+  my($self, $module, $revision, $date ) = @_;
+  unless( defined ($module) ) { $module = ""; } # get rid of the pesky undefined warnings
+  unless( defined ($revision) ) { $revision = ""; }
+  unless( defined ($date) ) { $date = ""; }
+
+  $last_error = 0;
+    
+  $self->assertSessionOpen() || die "Error: failed to open MacCVS session file at $self->{session_file}\n";
+  
+  my($revstring) = ($revision ne "") ? $revision : "(none)";
+  my($datestring) = ($date ne "") ? $date : "(none)";
+  
+  print "Checking out $module with revision $revstring, date $datestring\n";
+
+  my($prm) =
+    q"'----':obj {form:name, want:type(docu), seld:TEXT(@), from:'null'()}, ".
+    q"modl:'TEXT'(@), tagr:'TEXT'(@), tagd:'TEXT'(@) ";
+  
+  my($evt) = do_event(qw/MCvs cout/, $gAppSig, $prm, $self->{name}, $module, $revision, $date);
+  return _checkForEventError($evt);
+}
+
+
+# update( self, branch tag, list of paths)
+# MacCVS udate command
+# returns 1 on success.
+# NOTE: MacCVS Pro does not correctly support this stuff yet (as of version 2.7d5).
+sub update()
+{
+  my($self, $branch, $paths ) = @_;
+
+  $last_error = 0;
+    
+  $self->assertSessionOpen() || die "Error: failed to open MacCVS session file at $self->{session_file}\n";
+
+  if ($branch eq "HEAD") {
+    $branch = "";
+  }
+  
+  my($paths_list) = "";
+  
+  my($path);
+  foreach $path (@$paths)
+  {
+    if ($paths_list ne "") {
+      $paths_list = $paths_list.", ";
+    }
+    
+    $paths_list = $paths_list."Ò".$path."Ó";
+  }
+    
+  my($prm) =
+    q"'----':obj {form:name, want:type(docu), seld:TEXT(@), from:'null'()}, ".
+    q"tagr:'TEXT'(@), tFls:[";
+
+  $prm = $prm.$paths_list."]";
+    
+  my($evt) = do_event(qw/MCvs updt/, $gAppSig, $prm, $self->{name}, $branch);
+  return _checkForEventError($evt);
+};
+
+
+sub getLastError()
+{
+  return $last_error;
+}
+
+1;
+=pod
+
+=head1 NAME
+
+MacCVS - Interface to MacCVS
+
+=head1 SYNOPSIS
+
+  use MacCVS;
+  $session = MacCVS->new( <session_file_path>) || die "cannot create session";
+  $session->checkout([module] [revision] [date]) || die "Could not check out";
+    
+=head1 DESCRIPTION
+
+This is a MacCVS interface for talking to MacCVS Pro client.
+MacCVSSession is the class used to manipulate the session
+
+=item new
+  MacCVS->new( <cvs session file path>);
+  
+  Creates a new session. Returns undef on failure.
+
+=item checkout( <module> [revision] [date] )
+
+  cvs checkout command. Revision and date are optional
+  returns 0 on failure
+  
+=cut
+
+=head1 SEE ALSO
+
+=over
+
+=item MacCVS Home Page
+
+http://www.maccvs.org/
+
+=back 
+
+=head1 AUTHORS
+
+Aleks Totic atotic@netscape.com
+Simon Fraser sfraser@netscape.com
+
+=cut
+
+__END__

mozilla/build/mac/build_scripts/Moz/Moz.pm

@@ -0,0 +1,603 @@
+=head1 NAME
+
+B<Moz> - routines for automating CodeWarrior builds, and some extra-curricular
+activities related to building Mozilla
+
+=head1 SYNOPSIS
+
+    use Moz;
+
+    OpenErrorLog(":::BuildLog");
+    StopForErrors();
+
+		$Moz::QUIET = 1;
+		InstallFromManifest(":projects:MANIFEST", $dist_dir);
+
+    BuildProjectClean(":projects:SomeProject.mcp", "SomeTarget");
+    MakeAlias(":projects:SomeProject.shlb", $dist_dir);
+
+    DontStopForErrors();
+
+    BuildProject(":projects:SomeOtherProject.mcp", "SomeTarget");
+
+=head1 DESCRIPTION
+
+B<Moz> comprises the routines needed to slap CodeWarrior around, force it
+to build a sequence of projects, report the results, and a few other things.
+This module should only contain functions that are generic to any build,
+not just the Mozilla build.
+
+=cut
+
+
+package			Moz::Moz;
+require			Exporter;
+
+use Cwd;
+
+use File::Copy;
+use File::Path;
+use File::Basename;
+
+use Mac::Types;
+use Mac::Events;
+use Mac::Processes;
+
+use ExtUtils::Manifest 'maniread';
+
+use Moz::CodeWarriorLib;
+
+@ISA				= qw(Exporter);
+
+@EXPORT			= qw( LaunchCodeWarrior
+                  GetCodeWarriorRelativePath
+                  current_directory
+                  full_path_to
+                  DoBuildProject
+                  ImportXMLProject
+                  ExportProjectToXML
+                  OpenErrorLog
+                  MakeAlias
+                  GetFileModDate
+                  StopForErrors
+                  DontStopForErrors
+                  InstallFromManifest
+                  InstallResources
+                  RedirectOutputToFile
+                  Delay
+                  ActivateApplication
+                  IsProcessRunning);
+
+@EXPORT_OK	= qw(CloseErrorLog QUIET);
+
+
+sub current_directory()
+	{
+		my $current_directory = cwd();
+		chop($current_directory) if ( $current_directory =~ m/:$/ );
+		return $current_directory;
+	}
+
+sub full_path_to($)
+	{
+		my ($path) = @_;
+		if ( $path =~ m/^[^:]+$/ )
+			{
+				$path = ":" . $path;
+			}
+
+		if ( $path =~ m/^:/ )
+			{
+				$path = current_directory() . $path;
+			}
+
+		return $path;
+	}
+
+$logging								= 0;
+$recent_errors_file			= "";
+$stop_on_1st_error			= 1;
+$QUIET									= 0;
+
+
+
+=head2 Logging all the errors and warnings - C<OpenErrorLog($log_file)>, C<CloseErrorLog()>
+
+The warnings and errors generated in the course of building projects can be logged to a file.
+Tinderbox uses this facility to show why a remote build failed.
+
+Logging is off by default.
+  Start logging at any point in your build process with C<OpenErrorLog($log_file)>.
+  Stop with C<CloseErrorLog()>.
+  You never need to close the log explicitly, unless you want to just log a couple of projects in the middle of a big list.
+  C<CloseErrorLog()> is not exported by default. 
+
+=cut
+
+sub CloseErrorLog()
+	{
+		if ( $logging )
+			{
+				close(ERROR_LOG);
+				$logging = 0;
+				StopForErrors() if $stop_on_1st_error;
+			}
+	}
+
+
+
+sub OpenErrorLog($)
+	{
+		my ($log_file) = @_;
+
+		CloseErrorLog();
+		if ( $log_file )
+			{
+				$log_file = full_path_to($log_file);
+ 
+				open(ERROR_LOG, ">$log_file") || die "Error: Can't open $log_file\n";
+				MacPerl::SetFileInfo("CWIE", "TEXT", $log_file);
+
+				$log_file =~ m/.+:(.+)/;
+				$recent_errors_file = full_path_to("$1.part");
+				$logging = 1;
+			}
+	}
+
+
+=head2 Stopping before it's too late - C<StopForErrors()>, C<DontStopForErrors()>
+
+When building a long list of projects, you decide whether to continue building subsequent projects when one fails.
+  By default, your build script will C<die> after the first project that generates an error while building.
+  Change this behavior with C<DontStopForErrors()>.
+  Re-enable it with C<StopForErrors()>.
+
+=cut
+
+sub StopForErrors()
+	{
+		$stop_on_1st_error = 1;
+		
+			# Can't stop for errors unless we notice them.
+			# Can't notice them unless we are logging.
+			# If the user didn't explicitly request logging, log to a temporary file.
+
+		if ( ! $recent_errors_file )
+			{
+				OpenErrorLog("${TMPDIR}BuildResults");
+			}
+	}
+
+sub DontStopForErrors()
+	{
+		$stop_on_1st_error = 0;		
+	}
+
+sub log_message($)
+	{
+		if ( $logging )
+			{
+				my ($message) = @_;
+				print ERROR_LOG $message;
+			}
+	}
+
+sub log_message_with_time($)
+	{
+		if ( $logging )
+			{
+				my ($message) = @_;
+				my $time_stamp = localtime();
+				log_message("$message ($time_stamp)\n");
+			}
+	}
+
+sub log_recent_errors($)
+	{
+		my ($project_name) = @_;
+		my $found_errors = 0;
+	
+		if ( $logging )
+			{
+				open(RECENT_ERRORS, "<$recent_errors_file");
+
+				while( <RECENT_ERRORS> )
+					{
+						if ( /^Error/ || /^CouldnÕt find project file/ || /^Link Error/ )
+							{
+#								if (!$found_errors)
+#									print $_;
+								$found_errors = 1;
+							}
+						print ERROR_LOG $_;
+					}
+
+				close(RECENT_ERRORS);
+				unlink("$recent_errors_file");
+			}
+		
+		if ( $stop_on_1st_error && $found_errors )
+			{
+				print ERROR_LOG "### Build failed.\n";
+				die "### Errors encountered building \"$project_name\".\n";
+			}
+	}
+	
+sub DoBuildProject($$$)
+	{
+		my ($project_path, $target_name, $clean_build) = @_;
+		$project_path = full_path_to($project_path);
+
+#		$project_path =~ m/.+:(.+)/;
+#		my $project_name = $1;
+
+		log_message_with_time("### Building \"$project_path\"");
+
+			# Check that the given project exists
+		if (! -e $project_path)
+			{
+				print ERROR_LOG "### Build failed.\n";
+				die "### Can't find project file \"$project_path\".\n";
+			}
+		
+		print "Building \"$project_path\[$target_name\]\"\n";
+		
+		$had_errors = Moz::CodeWarriorLib::build_project(
+			$project_path, $target_name, $recent_errors_file, $clean_build
+		);
+		WaitNextEvent();
+
+#		$had_errors =
+#MacPerl::DoAppleScript(<<END_OF_APPLESCRIPT);
+#	tell (load script file "$CodeWarriorLib") to BuildProject("$project_path", "$project_name", "$target_name", "$recent_errors_file", $clean_build)
+#END_OF_APPLESCRIPT
+
+			# Append any errors to the globally accumulated log file
+#		if ( $had_errors ) # Removed this test, because we want warnings, too.  -- jrm
+			{
+				log_recent_errors($project_path);
+			}
+	}
+
+
+sub ImportXMLProject($$)
+{
+    my ($xml_path, $project_path) = @_;
+
+#    my ($codewarrior_ide_name) = Moz::CodeWarriorLib::getCodeWarriorIDEName();
+#    my $ascript = <<EOS;
+#      tell application "$codewarrior_ide_name"
+#        make new (project document) as ("$project_path") with data ("$xml_path")
+#      end tell
+#EOS
+#    print $ascript."\n";
+#    my($result) = MacPerl::DoAppleScript($ascript);
+#    unless ($result) { die "Error: ImportXMLProject AppleScript failed $^E $result\n";  }
+#    
+
+    my($import_error) = Moz::CodeWarriorLib::import_project($xml_path, $project_path);
+    if ($import_error ne "") {
+      die "Error: ImportXMLProject failed with error $import_error\n";
+    }
+}
+
+sub ExportProjectToXML($$)
+{
+    my ($project_path, $xml_path) = @_;
+
+    my (@suffix_list) = (".mcp");
+    my ($project_name, $project_dir, $suffix) = fileparse($project_path, @suffix_list);
+    if ($suffix eq "") { die "Project: $project_path doesn't look like a project file.\n"; }
+    
+    if (-e $xml_path) {
+        print "$xml_path exists - not exporting $project_path\n";
+    }
+    else {
+        print "Exporting $project_path to $xml_path\n";
+        my($export_error) = Moz::CodeWarriorLib::export_project($project_path, $xml_path);
+        if ($export_error ne "") {
+            die "Error: export_project failed with error '$export_error'\n";
+        }
+        
+        if (! -e $xml_path) {
+          die "Error: XML export to $xml_path failed\n";
+        }
+    }
+}
+
+
+=head2 Miscellaneous
+
+C<MakeAlias($old_file, $new_file)> functions like C<symlink()>, except with better argument defaulting and more explicit error messages.
+
+=cut
+
+sub MakeAlias($$)
+	{
+		my ($old_file, $new_file) = @_;
+
+			# if the directory to hold $new_file doesn't exist, create it
+		if ( ($new_file =~ m/(.+:)/) && !-d $1 )
+			{
+				mkpath($1);
+			}
+
+			# if a leaf name wasn't specified for $new_file, use the leaf from $old_file
+		if ( ($new_file =~ m/:$/) && ($old_file =~ m/.+:(.+)/) )
+			{
+				$new_file .= $1;
+			}
+
+		my $message = "Can't create a Finder alias (at \"$new_file\")\n for \"$old_file\"; because ";
+
+		die "Error: $message \"$old_file\" doesn't exist.\n" unless -e $old_file;
+		die "Error: $message I won't replace an existing (non-alias) file with an alias.\n" if ( -e $new_file && ! -l $new_file );
+
+			# now: $old_file exists; $new_file doesn't (or else, is an alias already)
+
+		if ( -l $new_file )
+			{
+					# ...then see if it already points to $old_file
+				my $current_target	= full_path_to(readlink($new_file));
+				my $new_target			= full_path_to($old_file);
+
+				return if ( $current_target eq $new_target );
+					# if the desired alias already exists and points to the right thing, then we're done
+				
+				unlink $new_file;
+			}
+		
+		symlink($old_file, $new_file) || die "Error: $message symlink returned an unexpected error.\n";
+	}
+	
+	
+=pod
+
+C<InstallFromManifest()>
+
+=cut
+
+sub InstallFromManifest($;$$)
+	{
+		my ($manifest_file, $dest_dir, $flat) = @_;
+		
+		$flat = 0 unless defined($flat); # if $flat, all rel. paths in MANIFEST get aliased to the root of $dest_dir
+
+		$dest_dir ||= ":";
+
+		$manifest_file =~ m/(.+):/;
+		my $source_dir =  $1;
+
+		chop($dest_dir) if $dest_dir =~ m/:$/;
+
+		#Mac::Events->import();
+		WaitNextEvent();
+		if ($flat)
+		{
+			print "Doing manifest on \"$manifest_file\" FLAT\n" unless $QUIET;
+		}
+		else
+		{
+			print "Doing manifest on \"$manifest_file\"\n" unless $QUIET;
+		}
+		
+		my $read = maniread(full_path_to($manifest_file));
+		foreach $file (keys %$read)
+			{
+				next unless $file;
+
+				$subdir = ":";
+				if (!$flat && ($file =~ /:.+:/ ))
+					{
+						$subdir = $&;
+					}
+
+				$file = ":$file" unless $file =~ m/^:/;
+				MakeAlias("$source_dir$file", "$dest_dir$subdir");
+			}
+	}
+
+
+=pod
+
+C<InstallResources()>
+
+=cut
+
+# parameters are path to MANIFEST file, destination dir, true (to make copies) or false (to make aliases)
+sub InstallResources($;$;$)
+	{
+		my ($manifest_file, $dest_dir, $copy_files) = @_;
+
+		$dest_dir ||= ":";
+		mkpath($dest_dir) if !-d $dest_dir;
+
+		$manifest_file =~ m/(.+):/;
+		my $source_dir =  $1;
+
+		chop($dest_dir) if $dest_dir =~ m/:$/;
+
+		WaitNextEvent();
+		print "Installing resources from \"$manifest_file\"\n" unless $QUIET;
+		
+		my $read = maniread(full_path_to($manifest_file));
+		foreach $file (keys %$read)
+			{
+				next unless $file;
+				
+				if ($copy_files)
+					{
+						copy("$source_dir:$file", "$dest_dir:$file");
+					}
+				else
+					{
+						MakeAlias("$source_dir:$file", "$dest_dir:$file");
+					}
+			}
+	}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// Delay
+#//--------------------------------------------------------------------------------------------------
+sub Delay($)		
+{
+  my ($delay_seconds) = @_;
+
+  $now = time;
+  
+  $exit_time = $now + $delay_seconds;
+
+  while ($exit_time > $now) {
+     $now = time;
+  }
+	
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// GetFileModDate
+#//--------------------------------------------------------------------------------------------------
+sub GetFileModDate($)
+{
+    my($filePath)=@_;
+    my($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
+        $atime,$mtime,$ctime,$blksize,$blocks) = stat($filePath);
+    return $mtime;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// LaunchCodeWarrior
+#//--------------------------------------------------------------------------------------------------
+sub LaunchCodeWarrior($)
+{
+  my($idepath_file) = @_;   # full path to IDE location file
+  my($cur_dir) = cwd();
+  
+  # this both launches and writes the IDE path file
+  Moz::CodeWarriorLib::activate($idepath_file);
+  
+  chdir($cur_dir);
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// GetCodeWarriorRelativePath
+#//--------------------------------------------------------------------------------------------------
+sub GetCodeWarriorRelativePath($)
+{
+  my($rel_path) = @_;
+  return Moz::CodeWarriorLib::getCodeWarriorPath($rel_path);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// RedirectOutputToFile
+#//--------------------------------------------------------------------------------------------------
+sub RedirectOutputToFile($)
+{
+    my($log_file) = @_;
+    
+    # ensure that folders in the path exist
+    my($logdir) = "";
+    my($logfile) = $log_file;
+    
+    if ($log_file =~ /(.+?:)([^:]+)$/)       # ? for non-greedy match
+    {
+        $logdir = $1;
+        $logfile = $2;
+        
+        mkpath($logdir);
+    }
+
+    print "Output is now being redirected to the file '$log_file'\n";
+    
+    open(STDOUT, "> $log_file") || die "Can't redirect stdout";
+    open(STDERR, ">&STDOUT") || die "Can't dup stdout";
+    select(STDERR); $| = 1;     # make unbuffered
+    select(STDOUT); $| = 1;     # make unbuffered
+    
+    MacPerl::SetFileInfo("CWIE", "TEXT", $log_file);
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// ActivateApplication
+#//--------------------------------------------------------------------------------------------------
+
+sub ActivateApplication($)
+{
+	my ($appSignature) = @_;
+	my ($psi, $found);
+	my ($appPSN);
+	
+	$found = 0;
+		
+	foreach $psi (values(%Process))
+	{
+		if ($psi->processSignature() eq $appSignature)
+		{
+			$appPSN = $psi->processNumber();
+			$found = 1;
+            last;
+		}
+	}
+
+	if ($found == 0 || SameProcess($appPSN, GetFrontProcess()))
+	{
+		return;
+	}
+
+	SetFrontProcess($appPSN);
+
+	while (GetFrontProcess() != $appPSN)
+	{
+		WaitNextEvent();
+	}
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// IsProcessRunning
+#//--------------------------------------------------------------------------------------------------
+
+sub IsProcessRunning($)
+{
+    my($processName, $psn, $psi) = @_;
+    while ( ($psn, $psi) = each(%Process) ) {
+     if ($psi->processName eq $processName) { return 1; }
+    }
+    return 0;
+}
+
+
+1;
+
+=head1 AUTHORS
+
+Scott Collins <scc@netscape.com>, Simon Fraser <sfraser@netscape.com>, Chris Yeh <cyeh@netscape.com>
+
+=head1 SEE ALSO
+
+BuildMozillaDebug.pl (et al), BuildList.pm, CodeWarriorLib (an AppleScript library)
+
+=head1 COPYRIGHT
+
+The contents of this file are subject to the Netscape Public
+License Version 1.1 (the "License"); you may not use this file
+except in compliance with the License. You may obtain a copy of
+the License at http://www.mozilla.org/NPL/
+
+Software distributed under the License is distributed on an "AS
+IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+implied. See the License for the specific language governing
+rights and limitations under the License.
+
+The Original Code is Mozilla Communicator client code, released
+March 31, 1998.
+
+The Initial Developer of the Original Code is Netscape
+Communications Corporation. Portions created by Netscape are
+Copyright (C) 1998-1999 Netscape Communications Corporation. All
+Rights Reserved.
+
+Contributor(s): 
+
+=cut

mozilla/build/mac/build_scripts/Moz/Prefs.pm

@@ -0,0 +1,272 @@
+
+package Moz::Prefs;
+
+require 5.004;
+require Exporter;
+
+# Package that attempts to read a file from the Preferences folder,
+# and get build settings out of it
+
+use strict;
+
+use Exporter;
+use File::Path;
+
+use Mac::Files;
+
+use vars qw(@ISA @EXPORT);
+
+@ISA		  = qw(Exporter);
+@EXPORT 	= qw(ReadMozUserPrefs);
+
+
+#-------------------------------------------------------------------------------
+#
+# GetPrefsFolder
+#
+#-------------------------------------------------------------------------------
+
+sub GetPrefsFolder()
+{
+  my($prefs_folder) = FindFolder(kOnSystemDisk, kPreferencesFolderType, 1);
+  return $prefs_folder.":Mozilla build prefs";
+}
+
+
+#-------------------------------------------------------------------------------
+#
+# SetArrayValue
+#
+#-------------------------------------------------------------------------------
+sub SetArrayValue($$$)
+{
+  my($array_ref, $index1, $index2) = @_;
+
+  my($index);
+  foreach $index (@$array_ref)
+  {
+    if ($index->[0] eq $index1)
+    {
+      $index->[1] = $index2;
+      return 1;
+    }
+  }
+  
+  return 0;
+}
+
+
+#-------------------------------------------------------------------------------
+#
+# WriteDefaultPrefsFile
+#
+#-------------------------------------------------------------------------------
+
+sub WriteDefaultPrefsFile($)
+{
+  my($file_path) = @_;
+
+  my($file_contents);
+  $file_contents = <<'EOS';
+% You can use this file to customize the Mozilla build system.
+% The following kinds of lines are allowable:
+%   Comment lines, which start with a '%' in the first column
+%   Lines which modify the default build settings. For the list of flags,
+%   see MozBuildFlags.pm. Examples are:
+%
+%    build       pull            0                    % don't pull
+%    options     mng             1                    % turn mng on
+%   
+%   Line containing the special 'buildfrom' flag, which specifies
+%   where to start the build. Example:
+%   
+%    buildfrom   nglayout                % where to start the build
+%
+%   Lines which specify the location of the files used to store paths
+%   to the CodeWarrior IDE, and the MacCVS Pro session file. Note quoting
+%   of paths containing whitespace. Examples:
+%
+%    filepath   idepath         ::codewarrior.txt
+%    filepath   sessionpath     ":Some folder:MacCVS session path.txt"
+%
+%   Lines which modify the build settings like %main::DEBUG.
+%   Any lines which do not match either of the above are assumed
+%   to set variables on $main::. Examples:
+%   
+%    MOZILLA_OFFICIAL    1
+%
+EOS
+
+  $file_contents =~ s/%/#/g;
+   
+  local(*PREFS_FILE);
+
+  open(PREFS_FILE, "> $file_path") || die "Could not write default prefs file\n";
+  print PREFS_FILE ($file_contents);
+  close(PREFS_FILE);
+
+  MacPerl::SetFileInfo("McPL", "TEXT", $file_path);
+}
+
+
+#-------------------------------------------------------------------------------
+#
+# HandlePrefSet
+#
+#-------------------------------------------------------------------------------
+sub HandlePrefSet($$$$)
+{
+  my($flags, $name, $value, $desc) = @_;
+
+  if (SetArrayValue($flags, $name, $value)) {
+    print "Prefs set $desc flag '$name' to '$value'\n";
+  } else {
+    die "$desc setting '$name' is not a valid option\n";
+  }
+
+}
+
+
+#-------------------------------------------------------------------------------
+#
+# HandleBuildFromPref
+#
+#-------------------------------------------------------------------------------
+sub HandleBuildFromPref($$)
+{
+  my($build_array, $name) = @_;
+
+  my($setting) = 0;
+  my($index);
+  foreach $index (@$build_array)
+  {
+    if ($index->[0] eq $name) {
+      $setting = 1;
+    }
+    
+    $index->[1] = $setting;    
+  }
+
+  if ($setting == 1) {
+    print "Building from $name onwards, as specified by prefs\n";
+  } else {
+    printf "Failed to find buildfrom setting '$name'\n";
+  }
+}
+
+
+#-------------------------------------------------------------------------------
+#
+# ReadPrefsFile
+#
+#-------------------------------------------------------------------------------
+
+sub ReadPrefsFile($$$$$)
+{
+  my($file_path, $build_flags, $options_flags, $filepath_flags, $create_if_missing) = @_;
+  
+  local(*PREFS_FILE);
+  
+  if (open(PREFS_FILE, "< $file_path"))
+  {
+    print "Reading build prefs from '$file_path'\n";
+  
+    while (<PREFS_FILE>)
+    {
+      my($line) = $_;
+      chomp($line);
+      
+      if ($line =~ /^\#/ || $line =~ /^\s*$/) {    # ignore comments and empty lines
+        next;
+      }
+            
+      if (($line =~ /^\s*([^#\s]+)\s+([^#\s]+)\s+\"(.+)\"(\s+#.+)?/) ||
+          ($line =~ /^\s*([^#\s]+)\s+([^#\s]+)\s+\'(.+)\'(\s+#.+)?/) ||
+          ($line =~ /^\s*([^#\s]+)\s+([^#\s]+)\s+([^#\s]+)(\s+#.+)?/))
+      {
+        my($array_name) = $1;      
+        my($option_name) = $2;
+        my($option_value) = $3;      
+      
+        # print "Read '$array_name' '$option_name' '$option_value'\n";
+        
+        if ($array_name eq "build")
+        {
+          HandlePrefSet($build_flags, $option_name, $option_value, "Build");
+        }
+        elsif ($array_name eq "options")
+        {
+          HandlePrefSet($options_flags, $option_name, $option_value, "Options");
+        }
+        elsif ($array_name eq "filepath" && $option_name && $option_value)
+        {
+          HandlePrefSet($filepath_flags, $option_name, $option_value, "Filepath");
+        }
+        else
+        {
+          print "Unknown pref option at $line\n";
+        }
+      }
+      elsif ($line =~ /^\s*buildfrom\s+([^#\s]+)(\s+#.+)?/)
+      {
+        my($build_start) = $1;
+        HandleBuildFromPref($build_flags, $build_start);
+      }
+      elsif ($line =~ /^\s*([^#\s]+)\s+([^#\s]+)(\s+#.+)?/)
+      {
+        my($build_var) = $1;
+        my($var_setting) = $2;
+        
+        print "Setting \$main::$build_var to $var_setting\n";
+        eval "\$main::$build_var = \"$var_setting\"";
+      }
+      else
+      {
+        print "Unrecognized input line at $line\n";
+      }
+      
+    }
+    
+    close(PREFS_FILE);  
+  }
+  elsif ($create_if_missing)
+  {
+    print "No prefs file found at $file_path; using defaults\n";
+    
+    my($folder_path) = $file_path;
+    $folder_path =~ s/[^:]+$//;
+    mkpath($folder_path);
+    WriteDefaultPrefsFile($file_path);
+  }
+}
+
+
+#-------------------------------------------------------------------------------
+#
+# ReadMozUserPrefs
+#
+#-------------------------------------------------------------------------------
+
+sub ReadMozUserPrefs($$$$)
+{
+  my($prefs_file_name, $build_flags, $options_flags, $filepath_flags) = @_;
+  
+  if ($prefs_file_name eq "") { return; }
+  
+  # if local prefs exist, just use those. Othewise, look in the prefs folder
+  if (-e $prefs_file_name)
+  {
+    # read local prefs
+    ReadPrefsFile($prefs_file_name, $build_flags, $options_flags, $filepath_flags, 0);
+  }
+  else
+  {
+    # first read prefs folder prefs
+    my($prefs_path) = GetPrefsFolder();
+    $prefs_path .= ":$prefs_file_name";
+
+    ReadPrefsFile($prefs_path, $build_flags, $options_flags, $filepath_flags, 1);
+  }
+}
+
+1;

mozilla/build/mac/build_scripts/Moz/ProjectXML.pm

@@ -0,0 +1,932 @@
+#!/usr/bin/perl
+
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#   Simon Fraser <sfraser@netscape.com>
+#
+
+package Moz::ProjectXML;
+
+require 5.004;
+require Exporter;
+
+use strict;
+use Exporter;
+
+use Cwd;
+use XML::DOM;
+
+use vars qw(@ISA @EXPORT);
+
+@ISA      = qw(Exporter);
+@EXPORT   = qw(
+                ParseXMLDocument
+                DisposeXMLDocument
+                WriteXMLDocument
+                CleanupPro5XML
+                GetTargetsList
+                CloneTarget
+                SetAsSharedLibraryTarget
+                SetAsStaticLibraryTarget
+                AddTarget
+                RemoveTarget
+                GetTargetSetting
+                SetTargetSetting
+                getChildElementTextContents
+              );
+
+
+#--------------------------------------------------------------------------------------------------
+# A module for reading, manipulating, and writing XML-format CodeWarrior project files.
+# 
+# Sample usage:
+# 
+# use ProjectXML;
+# 
+# my $doc = ProjectXML::ParseXMLDocument("Test.mcp.xml");
+# ProjectXML::CloneTarget($doc, "Test.shlb", "Test.lib");
+# ProjectXML::SetAsStaticLibraryTarget($doc, "Test.lib", "TestOutput.lib");
+# ProjectXML::WriteXMLDocument($doc, "Test_out.xml");
+# ProjectXML::DisposeXMLDocument($doc);
+# 
+#--------------------------------------------------------------------------------------------------
+
+
+#//--------------------------------------------------------------------------------------------------
+#// ParseXMLDocument
+#// Note that the caller must call DisposeXMLDocument on the returned doc
+#//--------------------------------------------------------------------------------------------------
+sub ParseXMLDocument($)
+{
+  my($doc_path) = @_;
+
+  my $parser = new XML::DOM::Parser(ErrorContext => 2);
+  my $doc = $parser->parsefile($doc_path);
+
+  return $doc;
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// DisposeXMLDocument
+#// Needed to avoid memory leaks - cleanup circular references for garbage collection
+#//--------------------------------------------------------------------------------------------------
+sub DisposeXMLDocument($)
+{
+  my($doc) = @_;
+  
+  $doc->dispose();
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// WriteXMLDocument
+#//--------------------------------------------------------------------------------------------------
+
+sub _pro5_tag_compression($$)
+{
+   return 1;    # Pro 5 is broken and can't import XML with <foo/> style tags
+}
+
+sub _pro6plus_tag_compression($$)
+{
+   return 0;    # Pro 6 can deal with empty XML tags like <foo/>
+}
+
+sub WriteXMLDocument($$$)
+{
+  my($doc, $file_path, $ide_version) = @_;
+
+  if ($ide_version eq "4.0")
+  {
+    XML::DOM::setTagCompression(\&_pro5_tag_compression);
+  }
+  else
+  {
+    XML::DOM::setTagCompression(\&_pro6plus_tag_compression);
+  }
+
+  $doc->printToFile($file_path);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// CleanupPro5XML
+#// XML Projects exported by Pro 5 contain garbage data under the MWMerge_MacOS_skipResources
+#// setting. This routine cleans this up, saving the result to a new file
+#//--------------------------------------------------------------------------------------------------
+sub CleanupPro5XML($$)
+{
+  my($xml_path, $out_path) = @_;
+  
+  local(*XML_FILE);
+  open(XML_FILE, "< $xml_path") || die "Error: failed to open file $xml_path\n";
+  
+  local(*CLEANED_FILE);
+  open(CLEANED_FILE, "> $out_path") || die "Error: failed to open file $out_path for writing\n";
+  
+  my $in_skip_resources_settings = 0;
+  
+  while(<XML_FILE>)
+  {
+      my($line) = $_;
+
+      if ($line =~ /^<\?codewarrior/)    # is processing inst line
+      {
+        my $test_line = $line;
+        chomp($test_line);
+  
+        my $out_line = $test_line;
+        if ($test_line =~ /^<\?codewarrior\s+exportversion=\"(.+)\"\s+ideversion=\"(.+)\"\s*\?>$/)
+        {
+          my $export_version = $1;
+          my $ide_version    = $2;
+
+          $ide_version = "4.0_mozilla";   # pseudo IDE version so we know we touched it
+          $out_line = "<?codewarrior exportversion=\"".$export_version."\" ideversion=\"".$ide_version."\"?>";
+        }
+
+        print CLEANED_FILE "$out_line\n";
+        next;
+      }
+      
+      if ($line =~ /MWMerge_MacOS_skipResources/)
+      {
+        $in_skip_resources_settings = 1;
+        print CLEANED_FILE "$line";
+      }
+      elsif($in_skip_resources_settings && $line =~ /<!-- Settings for/)
+      {
+        # leaving bad settings lines. Write closing tag
+        print CLEANED_FILE "                    <!-- Corrupted setting entries removed by script -->\n";
+        print CLEANED_FILE "                </SETTING>\n\n";
+        
+        print CLEANED_FILE "$line";
+
+        $in_skip_resources_settings = 0;
+      }
+      elsif (!$in_skip_resources_settings)
+      {      
+        print CLEANED_FILE "$line";
+      }
+  }
+  
+  close(XML_FILE);
+  close(CLEANED_FILE);
+
+}
+
+#--------------------------------------------------------------------------------------------------
+# SniffProjectXMLIDEVersion
+#
+#--------------------------------------------------------------------------------------------------
+sub SniffProjectXMLIDEVersion($)
+{
+  my($xml_path) = @_;
+  
+  my $found_version = "";
+  
+  local(*XML_FILE);
+  open(XML_FILE, "< $xml_path") || die "Error: failed to open file $xml_path\n";
+  
+  while(<XML_FILE>)
+  {
+      my($line) = $_;
+      chomp($line);
+      
+      if ($line =~ /^<\?codewarrior/)    # is processing inst line
+      {
+        unless ($line =~ /^<\?codewarrior\s+exportversion=\"(.+)\"\s+ideversion=\"(.+)\"\s*\?>$/)
+        {
+          die "Error: Failed to find ideversion in $xml_path in line $line\n";
+        }
+        
+        my $export_version = $1;
+        my $ide_version    = $2;
+
+        $found_version = $ide_version;         
+        last;
+      }
+  }
+  
+  close(XML_FILE);
+
+  return $found_version;
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// GetTargetsList
+#// Returns an array of target names
+#//--------------------------------------------------------------------------------------------------
+sub GetTargetsList($)
+{
+  my($doc) = @_;
+
+  my $nodes = $doc->getElementsByTagName("TARGET");
+  my $n = $nodes->getLength;
+  
+  my @target_names;
+  
+  for (my $i = 0; $i < $n; $i++)
+  {
+    my ($node) = $nodes->item($i);   
+   
+    my($target_name) = getChildElementTextContents($node, "NAME");
+    push(@target_names, $target_name);
+  }
+
+  return @target_names;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// CloneTarget
+#// Clone the named target, renaming it to 'new_name'
+#//--------------------------------------------------------------------------------------------------
+sub CloneTarget($$$)
+{
+  my($doc, $target_name, $new_name) = @_;
+
+  my $target_node   = getTargetNode($doc, $target_name);
+
+  # clone here
+  my $target_clone  = $target_node->cloneNode(1);   # deep clone
+  
+  # -- munge target settings --
+
+  # set the target name field
+  setChildElementTextContents($doc, $target_clone, "NAME", $new_name);
+  
+  # set the targetname pref
+  setTargetNodeSetting($doc, $target_clone, "Targetname", $new_name);
+
+  # -- insert new target subtree --
+  
+  my $target_list   = $target_node->getParentNode();
+  $target_list->appendChild($target_clone);
+  
+  # -- now add to targetorder --
+  my (@target_order_nodes) = getChildOfDocument($doc, "TARGETORDER");
+  
+  my $target_order = @target_order_nodes[0];
+  
+  my $new_order     = $doc->createElement("ORDEREDTARGET");
+  my $order_name    = $doc->createElement("NAME");
+  
+  $new_order->appendChild($order_name);
+
+  setChildElementTextContents($doc, $new_order, "NAME", $new_name);
+  $target_order->appendChild($new_order);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// SetAsSharedLibraryTarget
+#// 
+#//--------------------------------------------------------------------------------------------------
+sub SetAsSharedLibraryTarget($$$)
+{
+  my($doc, $target_name, $output_name) = @_;
+
+  my $target_node = getTargetNode($doc, $target_name);
+
+  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_type", "SharedLibrary");
+  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_filetype", "1936223330"); #'shlb'
+  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_outfile", $output_name);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// AddFileToTarget
+#// 
+#// Add a file to the specified target(s).
+#// 
+#//--------------------------------------------------------------------------------------------------
+sub AddFileToTarget($$$)
+{
+  my($doc, $target_list, $file_name) = @_;
+
+  # the file must be added in 3 places:
+  # 1. in <TARGET><FILELIST><FILE> (with linkage flags if necessary)
+  # 2. in <TARGET><LINKORDER><FILEREF>
+  # 3. in <GROUPLIST><GROUP><FILEREF>
+  die "Write me\n";
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// RemoveFileFromTarget
+#// 
+#// Remove a file from the specified target, removing it from the entire project
+#// if no other targets reference it.
+#// 
+#//--------------------------------------------------------------------------------------------------
+sub RemoveFileFromTarget($$$)
+{
+  my($doc, $target_node, $file_name) = @_;
+  
+  # the file must be removed in 3 places:
+  # 1. in <TARGET><FILELIST><FILE>
+  # 2. in <TARGET><LINKORDER><FILEREF>
+  # 3. in <GROUPLIST><GROUP><FILEREF>
+  
+  # first, remove from <FILELIST>
+  my $filelist_node = getFirstChildElement($target_node, "FILELIST");
+  unless ($filelist_node) { die "Error: failed to find FILELIST node\n"; }
+  
+  my $file_node = getChildNodeByGrandchildContents($doc, $filelist_node, "FILE", "PATH", $file_name);
+  unless ($file_node) { return; }
+
+  $filelist_node->removeChild($file_node);
+  
+  # next, remove from <LINKORDER>
+  my $linkorder_node = getFirstChildElement($target_node, "LINKORDER");
+  unless ($linkorder_node) { die "Error: failed to find LINKORDER node\n"; }
+  
+  my $fileref_node = getChildNodeByGrandchildContents($doc, $linkorder_node, "FILEREF", "PATH", $file_name);
+  unless ($fileref_node) { die "Error: link order node for file $file_name not found\n"; }
+
+  $linkorder_node->removeChild($fileref_node);
+  
+  # last, remove from <GROUPLIST>
+  # <GROUPLIST> is cross-target, so we have to be careful here.
+  my $grouplist_node = getChildOfDocument($doc, "GROUPLIST");
+  unless ($grouplist_node) { die "Error: failed to find GROUPLIST node\n"; }
+
+  # if the file isn't in any other targets, remove it from the groups
+  if (!GetFileInUse($doc, $file_name))
+  {
+    print "File $file_name is in no other targest. Removing from project\n";
+
+    my @group_nodes;
+    getChildElementsOfType($doc, $grouplist_node, "GROUP", \@group_nodes);
+    my $group_node;
+    foreach $group_node (@group_nodes)
+    {
+      my @fileref_nodes;
+      getChildElementsOfType($doc, $group_node, "FILEREF", \@fileref_nodes);
+  
+      my $fileref_node;
+      foreach $fileref_node (@fileref_nodes)
+      {
+        my $path_name = getChildElementTextContents($fileref_node, "PATH");
+        if ($path_name eq $file_name)
+        {
+          print "Removing $file_name from project group list\n";
+          $group_node->removeChild($fileref_node);
+          last;
+        }
+      }
+      
+      # can a file appear in more than one group?
+    }
+  }
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// SetAsStaticLibraryTarget
+#// 
+#//--------------------------------------------------------------------------------------------------
+sub SetAsStaticLibraryTarget($$$)
+{
+  my($doc, $target_name, $output_name) = @_;
+
+  my $target_node = getTargetNode($doc, $target_name);
+
+  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_type", "Library");
+  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_filetype", "1061109567"); #'????'
+  setTargetNodeSetting($doc, $target_node, "MWProject_PPC_outfile", $output_name);
+
+  # static targets don't need any library linkage, so we can remove linkage
+  # with all .shlb and .Lib files.
+  
+  my(@obsolete_files) = ("NSStdLibStubs", "InterfacesStubs", "InterfaceLib", "InternetConfigLib");
+
+  print " Removing libraries etc. from target\n";
+
+  # get all files in target
+  my @target_files = GetTargetFilesList($doc, $target_name);
+  my $target_file;
+  foreach $target_file (@target_files)
+  {
+    if ($target_file =~ /(\.shlb|\.lib|\.Lib|\.o|\.exp)$/)
+    {
+      RemoveFileFromTarget($doc, $target_node, $target_file);
+    }
+  }
+  
+  print " Removing stub libraries from target\n";
+  
+  # then remove files with known names
+  my $obs_file;
+  foreach $obs_file (@obsolete_files)
+  {
+    RemoveFileFromTarget($doc, $target_node, $obs_file);
+  }
+
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// AddTarget
+#// 
+#//--------------------------------------------------------------------------------------------------
+sub AddTarget($$)
+{
+  my($doc, $target_name) = @_;
+
+  die "Write me\n";
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// RemoveTarget
+#// 
+#//--------------------------------------------------------------------------------------------------
+sub RemoveTarget($$)
+{
+  my($doc, $target_name) = @_;
+
+  die "Write me\n";
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// GetTargetSetting
+#// Get the value for the specified setting in the specified target
+#//--------------------------------------------------------------------------------------------------
+sub GetTargetSetting($$$)
+{
+  my($doc, $target_name, $setting_name) = @_;
+
+  my $target_node   = getTargetNode($doc, $target_name);
+  return getTargetNodeSetting($target_node, "VALUE");
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// SetTargetSetting
+#// Set the value for the specified setting in the specified target
+#//--------------------------------------------------------------------------------------------------
+sub SetTargetSetting($$$$)
+{
+  my($doc, $target_name, $setting_name, $new_value) = @_;
+
+  my $target_node   = getTargetNode($doc, $target_name);
+  setTargetNodeSetting($doc, $target_node, "VALUE", $new_value);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// GetTargetFilesList
+#// Return an array of the files in the target (in filelist order)
+#//--------------------------------------------------------------------------------------------------
+sub GetTargetFilesList($$)
+{
+  my($doc, $target_name) = @_;
+
+  my $target_node = getTargetNode($doc, $target_name);
+
+  my @files_list;
+    
+  my $filelist_node = getFirstChildElement($target_node, "FILELIST");
+  unless ($filelist_node) { die "Error: failed to find FILELIST node\n"; }
+
+  my @file_nodes;
+  getChildElementsOfType($doc, $filelist_node, "FILE", \@file_nodes);
+  
+  my $node;
+  foreach $node (@file_nodes)
+  {
+    my $file_name = getChildElementTextContents($node, "PATH");
+    push(@files_list, $file_name);
+  }
+  
+  return @files_list;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// FileIsInTarget
+#// 
+#//--------------------------------------------------------------------------------------------------
+sub FileIsInTarget($$$)
+{
+  my($doc, $file_name, $target_name) = @_;
+
+  my $target_node = getTargetNode($doc, $target_name);
+  unless ($target_node) { die "Error: no target found called $target_name\n"; }
+
+  my $file_node = GetTargetFileNode($doc, $target_node, $file_name);
+  if ($file_node) {
+    return 1;
+  }
+  
+  return 0;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// GetFileTargetsList
+#// Return an array of the targets that a file is in (expensive)
+#//--------------------------------------------------------------------------------------------------
+sub GetFileTargetsList($$)
+{
+  my ($doc, $file_name) = @_;
+
+  my @target_list;
+
+  my @targets = GetTargetsList($doc);
+  my $target;
+  
+  foreach $target (@targets)
+  {
+    if (FileIsInTarget($doc, $file_name, $target))
+    {
+      push(@target_list, $target);
+    }
+  }
+  
+  return @target_list;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// GetTargetFileNode
+#// 
+#//--------------------------------------------------------------------------------------------------
+sub GetTargetFileNode($$$)
+{
+  my($doc, $target_node, $file_name) = @_;
+
+  my $filelist_node = getFirstChildElement($target_node, "FILELIST");
+  unless ($filelist_node) { die "Error: failed to find FILELIST node\n"; }
+  
+  my $file_node = getChildNodeByGrandchildContents($doc, $filelist_node, "FILE", "PATH", $file_name);
+
+  return $file_node;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// GetFileInUse
+#// Return true if the file is used by any target
+#//--------------------------------------------------------------------------------------------------
+sub GetFileInUse($$)
+{
+  my($doc, $file_name) = @_;
+
+  my $targetlist_node = getChildOfDocument($doc, "TARGETLIST");
+
+  my $target_node = $targetlist_node->getFirstChild();
+ 
+  while ($target_node)
+  {
+    if ($target_node->getNodeTypeName eq "ELEMENT_NODE" &&
+        $target_node->getTagName() eq "TARGET")
+    {
+      # if this is a target node
+      my $file_node = GetTargetFileNode($doc, $target_node, $file_name);
+      if ($file_node) {
+        return 1;   # found it
+      }      
+    }
+
+    $target_node = $target_node->getNextSibling();
+  }
+  
+  # not found
+  return 0;
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// getChildOfDocument
+#//--------------------------------------------------------------------------------------------------
+sub getChildOfDocument($$)
+{
+  my($doc, $child_type) = @_;
+
+  return getFirstChildElement($doc->getDocumentElement(), $child_type);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// getFirstChildElement
+#//--------------------------------------------------------------------------------------------------
+sub getFirstChildElement($$)
+{
+  my($node, $element_name) = @_;
+
+  my $found_node;
+  
+  unless ($node) { die "getFirstChildElement called with empty node\n"; }
+  
+  #look for the first "element_name" child
+
+  my $child_node = $node->getFirstChild();
+ 
+  while ($child_node)
+  {
+    if ($child_node->getNodeTypeName eq "ELEMENT_NODE" &&
+        $child_node->getTagName() eq $element_name)
+    {
+      $found_node = $child_node;
+      last;
+    }
+
+    $child_node = $child_node->getNextSibling();
+  }
+   
+  return $found_node;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// getChildElementsOfType
+#// 
+#// Return an array of refs to child nodes of the given type
+#//--------------------------------------------------------------------------------------------------
+sub getChildElementsOfType($$$$)
+{
+  my($doc, $node, $child_type, $array_ref) = @_;
+
+  my $child_node = $node->getFirstChild();
+ 
+  while ($child_node)
+  {
+    if ($child_node->getNodeTypeName eq "ELEMENT_NODE" &&
+        $child_node->getTagName() eq $child_type)
+    {
+      push(@$array_ref, $child_node);
+    }
+
+    $child_node = $child_node->getNextSibling();
+  }
+
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// getChildElementTextContents
+#//--------------------------------------------------------------------------------------------------
+#
+# Given <FOOPY><NERD>Hi!</NERD></FOOPY>, where $node is <FOOPY>,
+# returns "Hi!". If > 1 <NERD> node, returns the contents of the first.
+#
+sub getChildElementTextContents($$)
+{
+  my($node, $tag_name) = @_;
+
+  my $first_element = getFirstChildElement($node, $tag_name);  
+  my $text_node     = $first_element->getFirstChild();
+  
+  my $text_contents = "";
+  
+  # concat adjacent text nodes
+  while ($text_node)
+  {
+    if ($text_node->getNodeTypeName() ne "TEXT_NODE")
+    {
+      last;
+    }
+
+    $text_contents = $text_contents.$text_node->getData();
+    $text_node = $text_node->getNextSibling();
+  }
+
+  return $text_contents;
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// setChildElementTextContents
+#//--------------------------------------------------------------------------------------------------
+sub setChildElementTextContents($$$$)
+{
+  my($doc, $node, $tag_name, $contents_text) = @_;
+  
+  my $first_element = getFirstChildElement($node, $tag_name);  
+  my $new_text_node = $doc->createTextNode($contents_text);
+  
+  # replace all child elements with a text element
+  removeAllChildren($first_element);
+  
+  $first_element->appendChild($new_text_node);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// getChildNodeByContents
+#// 
+#// Consider <foo><bar><baz>Foopy</baz></bar><bar><baz>Loopy</baz></bar></foo>
+#// This function, when called with getChildNodeByContents($foonode, "bar", "baz", "Loopy")
+#// returns the second <bar> node.
+#//--------------------------------------------------------------------------------------------------
+sub getChildNodeByGrandchildContents($$$$$)
+{
+  my($doc, $node, $child_type, $gc_type, $gc_contents) = @_;    # gc = grandchild
+
+  my $found_node;
+  my $child_node = $node->getFirstChild();
+  while ($child_node)
+  {
+    if ($child_node->getNodeTypeName eq "ELEMENT_NODE" &&
+        $child_node->getTagName() eq $child_type)
+    {
+      # check for a child of this node of type 
+      my $child_contents = getChildElementTextContents($child_node, $gc_type);
+
+      if ($child_contents eq $gc_contents)
+      {
+        $found_node = $child_node;
+        last;
+      }
+    }
+
+    $child_node = $child_node->getNextSibling();
+  }
+
+  return $found_node;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// getTargetNode
+#//--------------------------------------------------------------------------------------------------
+sub getTargetNode($$)
+{
+  my($doc, $target_name) = @_;
+
+  my $targetlist_node = getChildOfDocument($doc, "TARGETLIST");
+  return getChildNodeByGrandchildContents($doc, $targetlist_node, "TARGET", "NAME", $target_name);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// getTargetNamedSettingNode
+#//--------------------------------------------------------------------------------------------------
+sub getTargetNamedSettingNode($$)
+{
+  my($target_node, $setting_name) = @_;
+
+  my $setting_node;
+
+  my $settinglist_node = getFirstChildElement($target_node, "SETTINGLIST");
+  my $child_node = $settinglist_node->getFirstChild();
+ 
+  while ($child_node)
+  {
+    if ($child_node->getNodeTypeName ne "ELEMENT_NODE")
+    {
+      $child_node = $child_node->getNextSibling();
+      next;
+    }
+    
+    if ($child_node->getTagName() eq "SETTING")
+    {
+      my $set_name = getChildElementTextContents($child_node, "NAME");
+
+      if ($set_name eq $setting_name)
+      {
+        $setting_node = $child_node;
+        last;
+      }
+    }
+
+    $child_node = $child_node->getNextSibling();
+  }
+
+  return $setting_node;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// getTargetNodeSetting
+#//--------------------------------------------------------------------------------------------------
+sub getTargetNodeSetting($$)
+{
+  my($target_node, $setting_name) = @_;
+  
+  my $setting_node  = getTargetNamedSettingNode($target_node, $setting_name);
+  return getChildElementTextContents($setting_node, "VALUE");
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// setTargetNodeSetting
+#//--------------------------------------------------------------------------------------------------
+sub setTargetNodeSetting($$$$)
+{
+  my($doc, $target_node, $setting_name, $new_value) = @_;
+
+  my $setting_node  = getTargetNamedSettingNode($target_node, $setting_name);
+
+  setChildElementTextContents($doc, $setting_node, "VALUE", $new_value);
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// elementInArray
+#//--------------------------------------------------------------------------------------------------
+sub elementInArray($$)
+{
+  my($element, $array) = @_;
+  my $test;
+  foreach $test (@$array)
+  {
+    if ($test eq $element) {
+      return 1;
+    }
+  }
+  return 0;
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// removeAllChildren
+#//--------------------------------------------------------------------------------------------------
+sub removeAllChildren($)
+{
+  my($node) = @_;
+  
+  my $child_node = $node->getFirstChild();
+  
+  while ($child_node)
+  {
+    $node->removeChild($child_node);
+    $child_node = $node->getFirstChild();
+  }
+}
+
+
+#//--------------------------------------------------------------------------------------------------
+#// dumpNodeData
+#//--------------------------------------------------------------------------------------------------
+sub dumpNodeData($)
+{
+  my($node) = @_;
+  
+  unless ($node) { die "Null node passed to dumpNodeData\n"; }
+  
+  print "Dumping node $node\n";
+  
+  my($node_type) = $node->getNodeTypeName();
+  
+  if ($node_type eq "ELEMENT_NODE")
+  {
+    my($node_name) = $node->getTagName();
+    print "Element $node_name\n";
+  }
+  elsif ($node_type eq "TEXT_NODE")
+  {
+    my($node_data) = $node->getData;
+    # my(@node_vals) = unpack("C*", $node_data);
+    print "Text '$node_data'\n";    # may contain LF chars
+  }
+  else
+  {
+    print "Node $node_type\n";
+  }
+
+}
+
+#//--------------------------------------------------------------------------------------------------
+#// dumpNodeTree
+#//--------------------------------------------------------------------------------------------------
+sub dumpNodeTree($)
+{
+  my($node) = @_;
+  
+  my($child_node) = $node->getFirstChild();
+  
+  unless ($child_node) { return; }
+
+  # recurse
+  dumpNodeData($child_node);
+  
+  # then go through child nodes
+  while ($child_node)
+  {
+    dumpNodeTree($child_node);
+  
+    $child_node = $child_node->getNextSibling();
+  }
+}
+
+
+
+
+1;
+

mozilla/build/mac/build_scripts/MozillaBuildFlags.txt

@@ -0,0 +1,90 @@
+#-------------------------------------------------------------------------------
+# These 3 lists are the 'master lists' to control what gets built.
+# 
+# Ordering in these arrays is important; it has to reflect the order in
+# which the build occurs.
+#
+# Setting containing spaces must be quoted with double quotes.
+#-------------------------------------------------------------------------------
+
+build_flags
+all             1
+pull            0
+dist            0
+config          0
+xpidl           0
+idl             0
+stubs           0
+runtime         0
+common          0
+imglib          0
+libimg2         0
+necko           0
+security        0
+browserutils    0
+intl            0
+nglayout        0
+accessiblity    0
+editor          0
+embedding       0
+viewer          0
+xpapp           0
+extensions      0
+plugins         0
+mailnews        0
+apprunner       0
+resources       0
+
+options_flags
+pull_by_date    0
+chrome_jars     1
+chrome_files    0
+use_jars        1
+transformiix    1
+mathml          0      MOZ_MATHML
+svg             0      MOZ_SVG
+# svg requires libart, which is an lgpl library. You need to pull it 
+# explicitly.
+libart_lgpl     0
+mng             1
+ldap            1      MOZ_LDAP_XPCOM
+ldap_experimental 0    MOZ_LDAP_XPCOM_EXPERIMENTAL
+xmlextras       1
+wsp             0      MOZ_WSP
+inspector       1
+mailextras      1
+xptlink         0
+psm             0      MOZ_PSM
+embedding_test  1
+embedding_chrome 0
+embedding_xulprefs 0
+embedding_xulsecurity 0
+carbon          0      TARGET_CARBON
+useimg2         1      USE_IMG2
+lowmem          0      MOZ_MAC_LOWMEM
+accessible      1      ACCESSIBILITY
+bidi            1      IBMBIDI
+p3p             0
+jsd             1
+venkman         1
+moz_logging     1      MOZ_LOGGING
+chatzilla       1
+content_packs   1
+xml_rpc         1
+cview           1
+help            1
+timeline        0      MOZ_TIMELINE
+static_build    0      MOZ_STATIC_COMPONENT_LIBS
+string_debug    0      DEBUG_STRING
+string_stats    0      DEBUG_STRING_STATS
+xpctools        0      XPC_TOOLS_SUPPORT
+smime           1
+mdn             1
+print_preview   1      NS_PRINT_PREVIEW
+moz_xul         1      MOZ_XUL
+
+filepath_flags
+idepath             ":CodeWarrior IDE Path.txt"
+sessionpath         ":Mozilla session path.txt"
+buildlogfilepath    ":Build Logs:Mozilla build log.txt"   # this is a path
+scriptlogfilepath   ":Build Logs:Mozilla script log.txt"

mozilla/build/mac/build_scripts/MozillaCheckoutList.txt

@@ -0,0 +1,22 @@
+# List of modules to check out. Format is
+#   module, (tag), (date)
+# where tag and date are optional (non-trailing commas are required)
+#
+# Examples:
+#   mozilla/nsprpub, NSPRPUB_CLIENT_TAG
+#   mozilla/gc, , 10/25/2000 12:00:00
+#
+
+mozilla/nsprpub,        	NETSCAPE_7_0_RTM
+mozilla/security/nss,   	NETSCAPE_7_0_RTM
+mozilla/security/manager,	NETSCAPE_7_0_RTM
+mozilla/accessible,			NETSCAPE_7_0_RTM
+mozilla/directory/c-sdk,	NETSCAPE_7_0_RTM
+mozilla/lib/mac/Instrumentation, 	NETSCAPE_7_0_RTM
+mozilla/gfx2, 				NETSCAPE_7_0_RTM
+mozilla/modules/libpr0n,	NETSCAPE_7_0_RTM
+SeaMonkeyAll, 				NETSCAPE_7_0_RTM
+
+## You need this if you want to be able to use SVG
+## Note that this library is under the LGPL, not the MPL
+#mozilla/other-licenses/libart_lgpl

mozilla/build/mac/build_scripts/PullMozilla.pl

@@ -0,0 +1,79 @@
+#!perl
+
+#
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+#   Simon Fraser <sfraser@netscape.com>
+#
+
+require 5.004;
+
+use strict;
+
+use Cwd;
+use Moz::BuildUtils;
+use Moz::BuildCore;
+
+#-------------------------------------------------------------
+# Where have the build options gone?
+# 
+# The various build flags have been centralized into one place. 
+# The master list of options is in MozBuildFlags.txt. However, 
+# you should never need to edit that file, or this one.
+# 
+# To customize what gets built, or where to start the build, 
+# edit the $prefs_file_name file in
+# System Folder:Preferences:Mozilla build prefs:
+# Documentation is provided in that file.
+#-------------------------------------------------------------
+
+my($prefs_file_name) = "Mozilla pull prefs";
+
+#-------------------------------------------------------------
+# hashes to hold build options
+#-------------------------------------------------------------
+my(%build);
+my(%options);
+my(%filepaths);
+my(%optiondefines);
+
+# Hash of input files for this build. Eventually, there will be
+# input files for manifests, and projects too.
+my(%inputfiles) = (
+  "buildflags",     "MozillaBuildFlags.txt",
+  "checkoutdata",   "MozillaCheckoutList.txt",
+  "buildprogress",  "",
+  "buildmodule",    "MozillaBuildList.pm",
+  "checkouttime",   "Mozilla last checkout"
+);
+#-------------------------------------------------------------
+# end build hashes
+#-------------------------------------------------------------
+
+# set the build root directory, which is the the dir above mozilla
+SetupBuildRootDir(":mozilla:build:mac:build_scripts");
+
+# Set up all the flags on $main::, like DEBUG, CARBON etc.
+# Override the defaults using the preferences files.
+SetupDefaultBuildOptions(0, ":mozilla:dist:viewer:", "");
+
+my($do_checkout)    = 1;
+my($do_build)       = 0;
+
+RunBuild($do_checkout, $do_build, \%inputfiles, $prefs_file_name);

mozilla/client.mak

@@ -0,0 +1,511 @@
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): 
+
+DEPTH=.
+
+!if !defined(MOZ_TOP)
+#enable builds from changed top level directories
+MOZ_TOP=mozilla
+!endif
+
+MOZ_SRC_FLIPPED = $(MOZ_SRC:\=/)
+MOZ_DIST_FLIPPED = $(MOZ_SRC_FLIPPED)/mozilla/dist
+!ifdef MOZ_DEBUG
+MOZ_OBJDIR = WIN32_D.OBJ
+!else
+MOZ_OBJDIR = WIN32_O.OBJ
+!endif
+
+#
+# Command macro defines
+#
+
+#//------------------------------------------------------------------------
+#// Figure out how to do the pull.
+#//------------------------------------------------------------------------
+# uncomment these, modify branch tag, and check in to branch for milestones
+MOZ_BRANCH=NETSCAPE_7_0_RTM
+NSPR_CO_TAG=NETSCAPE_7_0_RTM
+PSM_CO_TAG=NETSCAPE_7_0_RTM
+NSS_CO_TAG=NETSCAPE_7_0_RTM
+LDAPCSDK_CO_TAG=NETSCAPE_7_0_RTM
+ACCESSIBLE_CO_TAG=NETSCAPE_7_0_RTM
+IMGLIB2_CO_TAG=NETSCAPE_7_0_RTM
+GFX2_CO_TAG=NETSCAPE_7_0_RTM
+
+
+!ifdef MOZ_BRANCH
+CVS_BRANCH=-r $(MOZ_BRANCH)
+!endif
+
+!ifdef MOZ_DATE
+CVS_BRANCH=$(CVS_BRANCH) -D "$(MOZ_DATE)"
+!endif
+
+# default pull is "quiet" but it can be overridden with MOZ_CVS_VERBOSE
+!ifndef MOZ_CVS_VERBOSE
+CVS_FLAGS=-q
+!endif
+
+# honor any user-defined CVS flags
+!ifdef MOZ_CVS_FLAGS
+CVS_FLAGS=$(CVS_FLAGS) $(MOZ_CVS_FLAGS)
+!endif
+
+# let's be explicit about CVSROOT... some windows cvs clients
+# are too stupid to correctly work without the -d option 
+#
+#  if they are too stupid, they should fail.  I am
+#  commenting this out because this does not work
+#  under 4nt.  (%'s are evaluted differently)
+#
+#  If it breaks you, mail dougt@netscape.com
+#  and leaf@mozilla.org
+#
+!if 0
+!if defined(CVSROOT)
+CVS_FLAGS=$(CVS_FLAGS) -d "$(CVSROOT)"
+!endif
+!endif
+
+!ifndef MOZ_CO_FLAGS
+MOZ_CO_FLAGS = -P
+!endif
+
+CVSCO = cvs $(CVS_FLAGS) co $(MOZ_CO_FLAGS) $(CVS_BRANCH)
+
+#//------------------------------------------------------------------------
+#// Figure out how to pull NSPR.
+#// If no NSPR_CO_TAG is specified, use the default static tag
+#//------------------------------------------------------------------------
+
+!ifndef NSPR_CO_FLAGS
+NSPR_CO_FLAGS=$(MOZ_CO_FLAGS)
+!endif
+
+NSPR_CO_FLAGS=$(NSPR_CO_FLAGS) $(CVS_BRANCH)
+
+
+CVSCO_NSPR = cvs $(CVS_FLAGS) co $(NSPR_CO_FLAGS)
+
+#//------------------------------------------------------------------------
+#// Figure out how to pull NSS and PSM libs.
+#// If no NSS_CO_TAG or PSM_CO_TAG is specified, use the default static tag
+#//------------------------------------------------------------------------
+
+!ifndef NSS_CO_FLAGS
+NSS_CO_FLAGS=$(MOZ_CO_FLAGS)
+!endif
+
+NSS_CO_FLAGS=$(NSS_CO_FLAGS) $(CVS_BRANCH)
+
+CVSCO_NSS = cvs $(CVS_FLAGS) co $(NSS_CO_FLAGS)
+
+!ifndef PSM_CO_FLAGS
+PSM_CO_FLAGS=$(MOZ_CO_FLAGS)
+!endif
+
+PSM_CO_FLAGS=$(PSM_CO_FLAGS) $(CVS_BRANCH)
+
+CVSCO_PSM = cvs $(CVS_FLAGS) co $(PSM_CO_FLAGS)
+
+#//------------------------------------------------------------------------
+#// Figure out how to pull LDAP C SDK client libs.
+#// If no LDAPCSDK_CO_TAG is specified, use the default tag
+#//------------------------------------------------------------------------
+
+
+!ifndef LDAPCSDK_CO_FLAGS
+LDAPCSDK_CO_FLAGS=$(MOZ_CO_FLAGS)
+!endif
+
+LDAPCSDK_CO_FLAGS=$(LDAPCSDK_CO_FLAGS) $(CVS_BRANCH)
+
+CVSCO_LDAPCSDK = cvs $(CVS_FLAGS) co $(LDAPCSDK_CO_FLAGS)
+
+#//------------------------------------------------------------------------
+#// Figure out how to pull accessibility libs.
+#// If no ACCESSIBLE_CO_TAG is specified, use the default tag
+#//------------------------------------------------------------------------
+
+!ifndef ACCESSIBLE_CO_FLAGS
+ACCESSIBLE_CO_FLAGS=$(MOZ_CO_FLAGS)
+!endif
+
+ACCESSIBLE_CO_FLAGS=$(ACCESSIBLE_CO_FLAGS) $(CVS_BRANCH)
+
+CVSCO_ACCESSIBLE = cvs $(CVS_FLAGS) co $(ACCESSIBLE_CO_FLAGS)
+
+#//------------------------------------------------------------------------
+#// Figure out how to pull new image library.
+#// If no IMGLIB2_CO_TAG is specified, use the default tag
+#//------------------------------------------------------------------------
+
+!ifndef IMGLIB2_CO_FLAGS
+IMGLIB2_CO_FLAGS=$(MOZ_CO_FLAGS)
+!endif
+
+IMGLIB2_CO_FLAGS=$(IMGLIB2_CO_FLAGS) $(CVS_BRANCH)
+
+CVSCO_IMGLIB2 = cvs $(CVS_FLAGS) co $(IMGLIB2_CO_FLAGS)
+
+#//------------------------------------------------------------------------
+#// Figure out how to pull new image library.
+#// If no GFX2_CO_TAG is specified, use the default tag
+#//------------------------------------------------------------------------
+
+!ifndef GFX2_CO_FLAGS
+GFX2_CO_FLAGS=$(MOZ_CO_FLAGS)
+!endif
+
+GFX2_CO_FLAGS=$(GFX2_CO_FLAGS) $(CVS_BRANCH)
+
+CVSCO_GFX2 = cvs $(CVS_FLAGS) co $(GFX2_CO_FLAGS)
+
+#//------------------------------------------------------------------------
+#// Figure out how to pull the internal libart
+#// (only pulled and built if MOZ_INTERNAL_LIBART_LGPL is set)
+#// If no MOZ_INTERNAL_LIBART_CO_TAG is specified, use the default tag
+#//------------------------------------------------------------------------
+
+!if defined(MOZ_SVG) && !defined(MOZ_INTERNAL_LIBART_LGPL)
+ERR_MESSAGE = ^
+You are trying to build Mozilla with SVG support (MOZ_SVG=1), but you ^
+haven not specified that mozilla/other-licenses/libart_lgpl should be ^
+pulled and built. At the moment Mozilla SVG builds need this patched ^
+version of libart. You either need to disable SVG support (unset MOZ_SVG) ^
+or enable pulling and building by setting MOZ_INTERNAL_LIBART_LGPL=1.^
+^
+If you choose to pull and build libart, note that it is only licensed^
+under the terms of the LGPL, not the MPL. (Which is why you have to opt^
+in explicitly.)
+!endif
+
+!if defined(MOZ_INTERNAL_LIBART_LGPL)
+
+!ifndef MOZ_INTERNAL_LIBART_CO_FLAGS
+MOZ_INTERNAL_LIBART_CO_FLAGS=$(MOZ_CO_FLAGS)
+!endif
+
+!if "$(MOZ_INTERNAL_LIBART_CO_TAG)" != ""
+MOZ_INTERNAL_LIBART_CO_FLAGS=$(MOZ_INTERNAL_LIBART_CO_FLAGS) -r $(MOZ_INTERNAL_LIBART_CO_TAG)
+!else
+MOZ_INTERNAL_LIBART_CO_FLAGS=$(MOZ_INTERNAL_LIBART_CO_FLAGS) $(CVS_BRANCH)
+!endif
+
+CVSCO_MOZ_INTERNAL_LIBART = cvs $(CVS_FLAGS) co $(MOZ_INTERNAL_LIBART_CO_FLAGS)
+
+!endif
+
+## The master target
+############################################################
+
+pull_and_build_all: pull_all build_all_dep
+
+
+## Rules for pulling the source from the cvs repository
+############################################################
+
+pull_clobber_and_build_all: pull_all clobber_all build_all
+
+!if !defined(MOZ_INTERNAL_LIBART_LGPL)
+pull_all: pull_nspr pull_psm pull_ldapcsdk pull_accessible pull_gfx2 pull_imglib2 pull_seamonkey
+!else
+pull_all: pull_nspr pull_psm pull_ldapcsdk pull_accessible pull_gfx2 pull_imglib2 pull_moz_internal_libart pull_seamonkey
+!endif
+
+pull_nspr: pull_clientmak
+      cd $(MOZ_SRC)\.
+      $(CVSCO_NSPR) mozilla/nsprpub
+
+pull_nss:
+	cd $(MOZ_SRC)\.
+	$(CVSCO_NSS) mozilla/security/coreconf
+	$(CVSCO_NSS) mozilla/security/nss
+
+pull_psm: pull_nss
+	cd $(MOZ_SRC)\.
+	$(CVSCO_PSM) mozilla/security/manager
+	$(CVSCO_PSM) mozilla/security/makefile.win
+
+pull_ldapcsdk:
+	cd $(MOZ_SRC)\.
+	$(CVSCO_LDAPCSDK) mozilla/directory/c-sdk
+
+pull_accessible:
+	cd $(MOZ_SRC)\.
+	$(CVSCO_ACCESSIBLE) mozilla/accessible
+
+pull_gfx2:
+  cd $(MOZ_SRC)\.
+  $(CVSCO_GFX2) mozilla/gfx2
+
+pull_imglib2:
+  cd $(MOZ_SRC)\.
+  $(CVSCO_IMGLIB2) mozilla/modules/libpr0n
+
+!if defined(MOZ_INTERNAL_LIBART_LGPL)
+pull_moz_internal_libart:
+  cd $(MOZ_SRC)\.
+  $(CVSCO_MOZ_INTERNAL_LIBART) mozilla/other-licenses/libart_lgpl
+!endif
+
+pull_xpconnect: pull_nspr
+	cd $(MOZ_SRC)\.
+	$(CVSCO) mozilla/include
+	$(CVSCO) mozilla/config
+	$(CVSCO) -l mozilla/js
+	$(CVSCO) -l mozilla/js/src
+	$(CVSCO) mozilla/js/src/fdlibm
+	$(CVSCO) mozilla/js/src/xpconnect
+	$(CVSCO) mozilla/modules/libreg
+	$(CVSCO) mozilla/xpcom
+	$(CVSCO) mozilla/string
+
+# pull either layout only or seamonkey the browser
+pull_layout:
+	cd $(MOZ_SRC)\.
+	$(CVSCO) RaptorWin
+
+pull_seamonkey: pull_clientmak
+	cd $(MOZ_SRC)\.
+	$(CVSCO) SeaMonkeyAll
+
+pull_clientmak:
+    cd $(MOZ_SRC)\.
+    $(CVSCO) mozilla/client.mak
+
+############################################################
+
+# nmake has to be hardcoded, or we have to depend on mozilla/config
+# being pulled already to figure out what $(NMAKE) should be.
+
+clobber_all: clobber_nspr clobber_ldapcsdk clobber_psm clobber_seamonkey
+
+build_all: build_nspr build_ldapcsdk build_seamonkey
+
+build_all_dep: depend libs
+
+distclean: 
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\directory\c-sdk
+	gmake -f gmakefile.win distclean MOZ_SRC_FLIPPED=$(MOZ_SRC_FLIPPED)
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\nsprpub
+	gmake -f gmakefile.win distclean MOZ_SRC_FLIPPED=$(MOZ_SRC_FLIPPED)
+	@cd $(MOZ_SRC)\$(MOZ_TOP)
+	nmake /f client.mak clobber_psm
+	nmake /f client.mak clobber_seamonkey
+
+clobber_ldapcsdk:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\directory\c-sdk
+	gmake -f gmakefile.win clobber_all MOZ_SRC_FLIPPED=$(MOZ_SRC_FLIPPED) \
+		SHELL=sh
+
+clobber_nspr: 
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\nsprpub
+	gmake -f gmakefile.win clobber_all MOZ_SRC_FLIPPED=$(MOZ_SRC_FLIPPED)
+
+clobber_psm:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\security
+	nmake -f makefile.win clobber_all
+
+clobber_xpconnect:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\.
+	-rd /s /q dist
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\nsprpub
+	gmake -f gmakefile.win clobber_all  MOZ_SRC_FLIPPED=$(MOZ_SRC_FLIPPED)
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\include
+	nmake -f makefile.win clobber_all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\modules\libreg
+	nmake -f makefile.win clobber_all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\string
+	nmake -f makefile.win clobber_all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\xpcom
+	nmake -f makefile.win clobber_all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\js
+	nmake -f makefile.win clobber_all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\js\src\xpconnect
+	nmake -f makefile.win clobber_all
+
+clobber_seamonkey:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\.
+	-rd /s /q dist
+	nmake -f makefile.win clobber_all 
+
+depend: export
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\.
+	nmake -f makefile.win depend 
+
+depend_xpconnect:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\include
+	nmake -f makefile.win depend
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\modules\libreg
+	nmake -f makefile.win depend
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\string
+	nmake -f makefile.win depend
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\xpcom
+	nmake -f makefile.win depend
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\js\src
+	nmake -f makefile.win depend
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\js\src\xpconnect
+	nmake -f makefile.win depend
+
+build_nspr: 
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\nsprpub
+	gmake -f gmakefile.win MOZ_SRC_FLIPPED=$(MOZ_SRC_FLIPPED)
+
+build_ldapcsdk:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\directory\c-sdk
+	gmake -f gmakefile.win MOZ_SRC_FLIPPED=$(MOZ_SRC_FLIPPED) SHELL=sh
+
+build_psm:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\security
+	nmake -f makefile.win 
+
+build_xpconnect: build_nspr
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\include
+	nmake -f makefile.win all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\modules\libreg
+	nmake -f makefile.win all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\xpcom
+	nmake -f makefile.win export
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\string
+	nmake -f makefile.win all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\xpcom
+	nmake -f makefile.win libs
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\js\src
+	nmake -f makefile.win all
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\js\src\xpconnect
+	nmake -f makefile.win all
+
+build_seamonkey:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\.
+	nmake -f makefile.win all
+
+build_client:
+	@cd $(MOZ_SRC)\mozilla\.
+	nmake -f makefile.win all
+
+build_layout:
+	@cd $(MOZ_SRC)\mozilla\.
+	nmake -f makefile.win all
+
+build_dist:
+	@cd $(MOZ_SRC)\mozilla\.
+	nmake -f makefile.win all
+
+libs:
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\.
+	nmake -f makefile.win libs
+
+export: build_nspr build_ldapcsdk
+	@cd $(MOZ_SRC)\$(MOZ_TOP)\.
+	nmake -f makefile.win export
+
+clobber_dist:
+	@cd $(MOZ_SRC)\mozilla\.
+	nmake -f makefile.win clobber_all
+
+clobber_client:
+	@cd $(MOZ_SRC)\mozilla\.
+	nmake -f makefile.win clobber_all
+
+clobber_layout:
+	@cd $(MOZ_SRC)\mozilla\.
+	nmake -f makefile.win clobber_all
+
+browse_info::
+	cd $(MOZ_SRC)\$(MOZ_TOP)
+	-dir /s /b *.sbr > sbrlist.tmp
+	-bscmake /Es /o mozilla.bsc @sbrlist.tmp
+	-rm sbrlist.tmp
+
+regchrome::
+	@cd $(MOZ_SRC)\mozilla\.
+	nmake /f makefile.win regchrome
+
+deliver::
+	@cd $(MOZ_SRC)\mozilla\.
+	nmake /f makefile.win splitsymbols
+
+#//------------------------------------------------------------------------
+#// Utility stuff...
+#//------------------------------------------------------------------------
+
+#//------------------------------------------------------------------------
+# Verify that MOZ_SRC is set correctly
+#//------------------------------------------------------------------------
+
+# Check to see if it is set at all
+!if "$(MOZ_SRC)"==""
+MOZ_SRC = $(MAKEDIR)\..
+!endif
+
+#
+# create a temp file at the root and make sure it is visible from MOZ_SRC
+#
+!if [copy $(MAKEDIR)\client.mak $(MAKEDIR)\xyzzy.tmp > NUL] == 0
+!endif
+
+!if !EXIST( $(MOZ_SRC)\mozilla\xyzzy.tmp )
+ERR_MESSAGE=$(ERR_MESSAGE)^
+MOZ_SRC isn't set correctly: [$(MOZ_SRC)\mozilla]!=[$(MAKEDIR)]
+!endif
+
+!if [del $(MAKEDIR)\xyzzy.tmp]
+!endif
+
+#//------------------------------------------------------------------------
+# Verify that MOZ_BITS is set
+#//------------------------------------------------------------------------
+!if !defined(MOZ_BITS)
+ERR_MESSAGE=$(ERR_MESSAGE)^
+Environment variable MOZ_BITS isn't set.
+!endif
+
+!if !defined(MOZ_TOOLS)
+ERR_MESSAGE=$(ERR_MESSAGE)^
+Environment variable MOZ_TOOLS isn't set.
+!endif
+
+
+#//------------------------------------------------------------------------
+#// Display error 
+#//------------------------------------------------------------------------
+
+!if "$(ERR_MESSAGE)" != ""
+ERR_MESSAGE = ^
+client.mak:  ^
+$(ERR_MESSAGE) ^
+^
+client.mak: usage^
+^
+nmake -f client.mak [MOZ_BRANCH=<cvs_branch_name>] ^
+		    [MOZ_DATE=<cvs_date>]^
+		    [pull_and_build_all]^
+		    [pull_all]^
+		    [build_all]^
+^
+Environment variables:^
+^
+MOZ_BITS    set to 32^
+MOZ_TOOLS   set to the directory containing the needed tools ^
+
+!ERROR $(ERR_MESSAGE)
+
+!endif

mozilla/client.mk

@@ -0,0 +1,650 @@
+# The contents of this file are subject to the Netscape Public
+# License Version 1.1 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.mozilla.org/NPL/
+#
+# Software distributed under the License is distributed on an "AS
+# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+# implied. See the License for the specific language governing
+# rights and limitations under the License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation. All
+# Rights Reserved.
+#
+# Contributor(s): Stephen Lamm
+
+# Build the Mozilla client.
+#
+# This needs CVSROOT set to work, e.g.,
+#   setenv CVSROOT :pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
+# or
+#   setenv CVSROOT :pserver:username%somedomain.org@cvs.mozilla.org:/cvsroot
+# 
+# To checkout and build a tree,
+#    1. cvs co mozilla/client.mk
+#    2. cd mozilla
+#    3. gmake -f client.mk
+#
+# Other targets (gmake -f client.mk [targets...]),
+#    checkout
+#    build
+#    clean (realclean is now the same as clean)
+#    distclean
+#
+# See http://www.mozilla.org/build/unix.html for more information.
+#
+# Options:
+#   MOZ_OBJDIR           - Destination object directory
+#   MOZ_CO_DATE          - Date tag to use for checkout (default: none)
+#   MOZ_CO_MODULE        - Module to checkout (default: SeaMonkeyAll)
+#   MOZ_CVS_FLAGS        - Flags to pass cvs (default: -q -z3)
+#   MOZ_CO_FLAGS         - Flags to pass after 'cvs co' (default: -P)
+#   MOZ_MAKE_FLAGS       - Flags to pass to $(MAKE)
+#   MOZ_CO_BRANCH        - Branch tag (Deprecated. Use MOZ_CO_TAG below.)
+#
+
+#######################################################################
+# Checkout Tags
+#
+# For branches, uncomment the MOZ_CO_TAG line with the proper tag,
+# and commit this file on that tag.
+MOZ_CO_TAG = NETSCAPE_7_0_RTM
+NSPR_CO_TAG = NETSCAPE_7_0_RTM
+PSM_CO_TAG = NETSCAPE_7_0_RTM
+NSS_CO_TAG = NETSCAPE_7_0_RTM
+LDAPCSDK_CO_TAG = NETSCAPE_7_0_RTM
+ACCESSIBLE_CO_TAG = NETSCAPE_7_0_RTM
+GFX2_CO_TAG = NETSCAPE_7_0_RTM
+IMGLIB2_CO_TAG = NETSCAPE_7_0_RTM
+BUILD_MODULES = all
+
+#######################################################################
+# Defines
+#
+CVS = cvs
+
+CWD := $(shell pwd)
+
+ifeq "$(CWD)" "/"
+CWD   := /.
+endif
+
+ifneq (, $(wildcard client.mk))
+# Ran from mozilla directory
+ROOTDIR   := $(shell dirname $(CWD))
+TOPSRCDIR := $(CWD)
+else
+# Ran from mozilla/.. directory (?)
+ROOTDIR   := $(CWD)
+TOPSRCDIR := $(CWD)/mozilla
+endif
+
+# on os2, TOPSRCDIR may have two forward slashes in a row, which doesn't
+#  work;  replace first instance with one forward slash
+TOPSRCDIR := $(shell echo "$(TOPSRCDIR)" | sed -e 's%//%/%')
+
+ifndef TOPSRCDIR_MOZ
+TOPSRCDIR_MOZ=$(TOPSRCDIR)
+endif
+
+# if ROOTDIR equals only drive letter (i.e. "C:"), set to "/"
+DIRNAME := $(shell echo "$(ROOTDIR)" | sed -e 's/^.://')
+ifeq ($(DIRNAME),)
+ROOTDIR := /.
+endif
+
+AUTOCONF := autoconf
+MKDIR := mkdir
+SH := /bin/sh
+ifndef MAKE
+MAKE := gmake
+endif
+
+CONFIG_GUESS_SCRIPT := $(wildcard $(TOPSRCDIR)/build/autoconf/config.guess)
+ifdef CONFIG_GUESS_SCRIPT
+  CONFIG_GUESS = $(shell $(CONFIG_GUESS_SCRIPT))
+else
+  _IS_FIRST_CHECKOUT := 1
+endif
+
+####################################
+# CVS
+
+# Add the CVS root to CVS_FLAGS if needed
+CVS_ROOT_IN_TREE := $(shell cat $(TOPSRCDIR)/CVS/Root 2>/dev/null)
+ifneq ($(CVS_ROOT_IN_TREE),)
+ifneq ($(CVS_ROOT_IN_TREE),$(CVSROOT))
+  CVS_FLAGS := -d $(CVS_ROOT_IN_TREE)
+endif
+endif
+
+CVSCO = $(strip $(CVS) $(CVS_FLAGS) co $(CVS_CO_FLAGS))
+CVSCO_LOGFILE := $(ROOTDIR)/cvsco.log
+CVSCO_LOGFILE := $(shell echo $(CVSCO_LOGFILE) | sed s%//%/%)
+
+ifdef MOZ_CO_TAG
+  CVS_CO_FLAGS := -r $(MOZ_CO_TAG)
+endif
+
+####################################
+# Load mozconfig Options
+
+# See build pages, http://www.mozilla.org/build/unix.html, 
+# for how to set up mozconfig.
+MOZCONFIG_LOADER := mozilla/build/autoconf/mozconfig2client-mk
+MOZCONFIG_FINDER := mozilla/build/autoconf/mozconfig-find 
+MOZCONFIG_MODULES := mozilla/build/unix/modules.mk
+run_for_side_effects := \
+  $(shell cd $(ROOTDIR); \
+     if test "$(_IS_FIRST_CHECKOUT)"; then \
+        $(CVSCO) $(MOZCONFIG_FINDER) $(MOZCONFIG_LOADER) $(MOZCONFIG_MODULES); \
+     else true; \
+     fi; \
+     $(MOZCONFIG_LOADER) $(TOPSRCDIR) mozilla/.mozconfig.mk > mozilla/.mozconfig.out)
+include $(TOPSRCDIR)/.mozconfig.mk
+include $(TOPSRCDIR)/build/unix/modules.mk
+
+####################################
+# Options that may come from mozconfig
+
+# Change CVS flags if anonymous root is requested
+ifdef MOZ_CO_USE_MIRROR
+  CVS_FLAGS := -d :pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
+endif
+
+# MOZ_CVS_FLAGS - Basic CVS flags
+ifeq "$(origin MOZ_CVS_FLAGS)" "undefined"
+  CVS_FLAGS := $(CVS_FLAGS) -q -z 3 
+else
+  CVS_FLAGS := $(MOZ_CVS_FLAGS)
+endif
+
+# This option is deprecated. The best way to have client.mk pull a tag
+# is to set MOZ_CO_TAG (see above) and commit that change on the tag.
+ifdef MOZ_CO_BRANCH
+  $(warning Use MOZ_CO_TAG instead of MOZ_CO_BRANCH)
+  CVS_CO_FLAGS := -r $(MOZ_CO_BRANCH)
+endif
+
+# MOZ_CO_FLAGS - Anything that we should use on all checkouts
+ifeq "$(origin MOZ_CO_FLAGS)" "undefined"
+  CVS_CO_FLAGS := $(CVS_CO_FLAGS) -P
+else
+  CVS_CO_FLAGS := $(CVS_CO_FLAGS) $(MOZ_CO_FLAGS)
+endif
+
+ifdef MOZ_CO_DATE
+  CVS_CO_DATE_FLAGS := -D "$(MOZ_CO_DATE)"
+endif
+
+ifdef MOZ_OBJDIR
+  OBJDIR := $(MOZ_OBJDIR)
+  MOZ_MAKE := $(MAKE) $(MOZ_MAKE_FLAGS) -C $(OBJDIR)
+else
+  OBJDIR := $(TOPSRCDIR)
+  MOZ_MAKE := $(MAKE) $(MOZ_MAKE_FLAGS)
+endif
+
+####################################
+# CVS defines for PSM
+#
+PSM_CO_MODULE= mozilla/security/manager
+PSM_CO_FLAGS := -P -A
+ifdef MOZ_CO_FLAGS
+  PSM_CO_FLAGS := $(MOZ_CO_FLAGS)
+endif
+ifdef PSM_CO_TAG
+  PSM_CO_FLAGS := $(PSM_CO_FLAGS) -r $(PSM_CO_TAG)
+endif
+CVSCO_PSM = $(CVS) $(CVS_FLAGS) co $(PSM_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(PSM_CO_MODULE)
+
+####################################
+# CVS defines for NSS
+#
+NSS_CO_MODULE = mozilla/security/nss \
+		mozilla/security/coreconf \
+		$(NULL)
+
+NSS_CO_FLAGS := -P
+ifdef MOZ_CO_FLAGS
+  NSS_CO_FLAGS := $(MOZ_CO_FLAGS)
+endif
+ifdef NSS_CO_TAG
+   NSS_CO_FLAGS := $(NSS_CO_FLAGS) -r $(NSS_CO_TAG)
+endif
+# Cannot pull static tags by date
+ifeq ($(NSS_CO_TAG),NSS_CLIENT_TAG)
+CVSCO_NSS = $(CVS) $(CVS_FLAGS) co $(NSS_CO_FLAGS) $(NSS_CO_MODULE)
+else
+CVSCO_NSS = $(CVS) $(CVS_FLAGS) co $(NSS_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(NSS_CO_MODULE)
+endif
+
+####################################
+# CVS defines for NSPR
+#
+NSPR_CO_MODULE = mozilla/nsprpub
+NSPR_CO_FLAGS := -P
+ifdef MOZ_CO_FLAGS
+  NSPR_CO_FLAGS := $(MOZ_CO_FLAGS)
+endif
+ifdef NSPR_CO_TAG
+  NSPR_CO_FLAGS := $(NSPR_CO_FLAGS) -r $(NSPR_CO_TAG)
+endif
+# Cannot pull static tags by date
+ifeq ($(NSPR_CO_TAG),NSPRPUB_CLIENT_TAG)
+CVSCO_NSPR = $(CVS) $(CVS_FLAGS) co $(NSPR_CO_FLAGS) $(NSPR_CO_MODULE)
+else
+CVSCO_NSPR = $(CVS) $(CVS_FLAGS) co $(NSPR_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(NSPR_CO_MODULE)
+endif
+
+####################################
+# CVS defines for the C LDAP SDK
+#
+LDAPCSDK_CO_MODULE = mozilla/directory/c-sdk
+LDAPCSDK_CO_FLAGS := -P
+ifdef MOZ_CO_FLAGS
+  LDAPCSDK_CO_FLAGS := $(MOZ_CO_FLAGS)
+endif
+ifdef LDAPCSDK_CO_TAG
+  LDAPCSDK_CO_FLAGS := $(LDAPCSDK_CO_FLAGS) -r $(LDAPCSDK_CO_TAG)
+endif
+CVSCO_LDAPCSDK = $(CVS) $(CVS_FLAGS) co $(LDAPCSDK_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(LDAPCSDK_CO_MODULE)
+
+####################################
+# CVS defines for the C LDAP SDK
+#
+ACCESSIBLE_CO_MODULE = mozilla/accessible
+ACCESSIBLE_CO_FLAGS := -P
+ifdef MOZ_CO_FLAGS
+  ACCESSIBLE_CO_FLAGS := $(MOZ_CO_FLAGS)
+endif
+ifdef ACCESSIBLE_CO_TAG
+  ACCESSIBLE_CO_FLAGS := $(ACCESSIBLE_CO_FLAGS) -r $(ACCESSIBLE_CO_TAG)
+endif
+CVSCO_ACCESSIBLE = $(CVS) $(CVS_FLAGS) co $(ACCESSIBLE_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(ACCESSIBLE_CO_MODULE)
+
+####################################
+# CVS defines for gfx2
+#
+GFX2_CO_MODULE = mozilla/gfx2
+GFX2_CO_FLAGS := -P
+ifdef MOZ_CO_FLAGS
+  GFX2_CO_FLAGS := $(MOZ_CO_FLAGS)
+endif
+ifdef GFX2_CO_TAG
+  GFX2_CO_FLAGS := $(GFX2_CO_FLAGS) -r $(GFX2_CO_TAG)
+endif
+CVSCO_GFX2 = $(CVS) $(CVS_FLAGS) co $(GFX2_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(GFX2_CO_MODULE)
+
+####################################
+# CVS defines for new image library
+#
+IMGLIB2_CO_MODULE = mozilla/modules/libpr0n
+IMGLIB2_CO_FLAGS := -P
+ifdef MOZ_CO_FLAGS
+  IMGLIB2_CO_FLAGS := $(MOZ_CO_FLAGS)
+endif
+ifdef IMGLIB2_CO_TAG
+  IMGLIB2_CO_FLAGS := $(IMGLIB2_CO_FLAGS) -r $(IMGLIB2_CO_TAG)
+endif
+CVSCO_IMGLIB2 = $(CVS) $(CVS_FLAGS) co $(IMGLIB2_CO_FLAGS) $(CVS_CO_DATE_FLAGS) $(IMGLIB2_CO_MODULE)
+
+####################################
+# CVS defines for standalone modules
+#
+ifneq ($(BUILD_MODULES),all)
+  MOZ_CO_MODULE := $(filter-out $(NSPRPUB_DIR) security directory/c-sdk, $(BUILD_MODULE_CVS))
+  MOZ_CO_MODULE += allmakefiles.sh client.mk aclocal.m4 configure configure.in
+  MOZ_CO_MODULE += Makefile.in
+  MOZ_CO_MODULE := $(addprefix mozilla/, $(MOZ_CO_MODULE))
+
+  NOSUBDIRS_MODULE := $(addprefix mozilla/, $(BUILD_MODULE_CVS_NS))
+ifneq ($(NOSUBDIRS_MODULE),)
+  CVSCO_NOSUBDIRS := $(CVSCO) -l $(CVS_CO_DATE_FLAGS) $(NOSUBDIRS_MODULE)
+endif
+
+ifeq (,$(filter $(NSPRPUB_DIR), $(BUILD_MODULE_CVS)))
+  CVSCO_NSPR :=
+endif
+ifeq (,$(filter security security/manager, $(BUILD_MODULE_CVS)))
+  CVSCO_PSM :=
+  CVSCO_NSS :=
+endif
+ifeq (,$(filter directory/c-sdk, $(BUILD_MODULE_CVS)))
+  CVSCO_LDAPCSDK :=
+endif
+ifeq (,$(filter accessible, $(BUILD_MODULE_CVS)))
+  CVSCO_ACCESSIBLE :=
+endif
+ifeq (,$(filter gfx2, $(BUILD_MODULE_CVS)))
+  CVSCO_GFX2 :=
+endif
+ifeq (,$(filter modules/libpr0n, $(BUILD_MODULE_CVS)))
+  CVSCO_IMGLIB2 :=
+endif
+endif
+
+####################################
+# CVS defines for SeaMonkey
+#
+ifeq ($(MOZ_CO_MODULE),)
+  MOZ_CO_MODULE := SeaMonkeyAll
+endif
+CVSCO_SEAMONKEY := $(CVSCO) $(CVS_CO_DATE_FLAGS) $(MOZ_CO_MODULE)
+
+####################################
+# CVS defined for libart (pulled and built if MOZ_INTERNAL_LIBART_LGPL is set)
+#
+CVSCO_LIBART := $(CVSCO) $(CVS_CO_DATE_FLAGS) mozilla/other-licenses/libart_lgpl
+
+ifdef MOZ_INTERNAL_LIBART_LGPL
+FASTUPDATE_LIBART := fast_update $(CVSCO_LIBART)
+CHECKOUT_LIBART := cvs_co $(CVSCO_LIBART)
+else
+CHECKOUT_LIBART := true
+FASTUPDATE_LIBART := true
+endif
+
+####################################
+# CVS defines for Calendar (pulled and built if MOZ_CALENDAR is set)
+#
+CVSCO_CALENDAR := $(CVSCO) $(CVS_CO_DATE_FLAGS) mozilla/calendar
+
+ifdef MOZ_CALENDAR
+FASTUPDATE_CALENDAR := fast_update $(CVSCO_CALENDAR)
+CHECKOUT_CALENDAR := cvs_co $(CVSCO_CALENDAR)
+else
+CHECKOUT_CALENDAR := true
+FASTUPDATE_CALENDAR := true
+endif
+
+
+# because some cygwin tools can't handle native dos-drive paths & vice-versa
+# force configure to use a relative path for --srcdir
+# need a better check for win32
+# and we need to get OBJDIR earlier
+ifdef MOZ_TOOLS
+_tmpobjdir := $(shell cygpath -u $(OBJDIR))
+_abs2rel := $(shell cygpath -w $(TOPSRCDIR)/build/unix/abs2rel.pl | sed -e 's|\\|/|g')
+_OBJ2SRCPATH := $(shell $(_abs2rel) $(TOPSRCDIR) $(_tmpobjdir))
+endif 
+
+#######################################################################
+# Rules
+# 
+
+# Print out any options loaded from mozconfig.
+all build checkout clean depend distclean export libs install realclean::
+	@if test -f .mozconfig.out; then \
+	  cat .mozconfig.out; \
+	  rm -f .mozconfig.out; \
+	else true; \
+	fi
+
+ifdef _IS_FIRST_CHECKOUT
+all:: checkout build
+else
+all:: checkout alldep
+endif
+
+# Windows equivalents
+pull_all: checkout
+build_all: build
+build_all_dep: alldep
+build_all_depend: alldep
+clobber clobber_all: clean
+pull_and_build_all: checkout alldep
+
+# Do everything from scratch
+everything: checkout clean build
+
+####################################
+# CVS checkout
+#
+checkout::
+#	@: Backup the last checkout log.
+	@if test -f $(CVSCO_LOGFILE) ; then \
+	  mv $(CVSCO_LOGFILE) $(CVSCO_LOGFILE).old; \
+	else true; \
+	fi
+ifdef RUN_AUTOCONF_LOCALLY
+	@echo "Removing local configures" ; \
+	cd $(ROOTDIR) && \
+	$(RM) -f mozilla/configure mozilla/nsprpub/configure \
+		mozilla/directory/c-sdk/configure
+endif
+	@echo "checkout start: "`date` | tee $(CVSCO_LOGFILE)
+	@echo '$(CVSCO) mozilla/client.mk mozilla/build/unix/modules.mk'; \
+        cd $(ROOTDIR) && \
+	$(CVSCO) mozilla/client.mk mozilla/build/unix/modules.mk
+	@cd $(ROOTDIR) && $(MAKE) -f mozilla/client.mk real_checkout
+
+real_checkout:
+#	@: Start the checkout. Split the output to the tty and a log file. \
+#	 : If it fails, touch an error file because "tee" hides the error.
+	@failed=.cvs-failed.tmp; rm -f $$failed*; \
+	cvs_co() { echo "$$@" ; \
+	  ("$$@" || touch $$failed) 2>&1 | tee -a $(CVSCO_LOGFILE) && \
+	  if test -f $$failed; then false; else true; fi; }; \
+	cvs_co $(CVSCO_NSPR) && \
+	cvs_co $(CVSCO_NSS) && \
+	cvs_co $(CVSCO_PSM) && \
+        cvs_co $(CVSCO_LDAPCSDK) && \
+        cvs_co $(CVSCO_ACCESSIBLE) && \
+        cvs_co $(CVSCO_GFX2) && \
+        cvs_co $(CVSCO_IMGLIB2) && \
+	$(CHECKOUT_CALENDAR) && \
+	$(CHECKOUT_LIBART) && \
+	cvs_co $(CVSCO_SEAMONKEY) && \
+	cvs_co $(CVSCO_NOSUBDIRS)
+	@echo "checkout finish: "`date` | tee -a $(CVSCO_LOGFILE)
+#	@: Check the log for conflicts. ;
+	@conflicts=`egrep "^C " $(CVSCO_LOGFILE)` ;\
+	if test "$$conflicts" ; then \
+	  echo "$(MAKE): *** Conflicts during checkout." ;\
+	  echo "$$conflicts" ;\
+	  echo "$(MAKE): Refer to $(CVSCO_LOGFILE) for full log." ;\
+	  false; \
+	else true; \
+	fi
+ifdef RUN_AUTOCONF_LOCALLY
+	@echo Generating configures using $(AUTOCONF) ; \
+	cd $(TOPSRCDIR) && $(AUTOCONF) && \
+	cd $(TOPSRCDIR)/nsprpub && $(AUTOCONF) && \
+	cd $(TOPSRCDIR)/directory/c-sdk && $(AUTOCONF)
+endif
+
+fast-update:
+#	@: Backup the last checkout log.
+	@if test -f $(CVSCO_LOGFILE) ; then \
+	  mv $(CVSCO_LOGFILE) $(CVSCO_LOGFILE).old; \
+	else true; \
+	fi
+ifdef RUN_AUTOCONF_LOCALLY
+	@echo "Removing local configures" ; \
+	cd $(ROOTDIR) && \
+	$(RM) -f mozilla/configure mozilla/nsprpub/configure \
+		mozilla/directory/c-sdk/configure
+endif
+	@echo "checkout start: "`date` | tee $(CVSCO_LOGFILE)
+	@echo '$(CVSCO) mozilla/client.mk mozilla/build/unix/modules.mk'; \
+        cd $(ROOTDIR) && \
+	$(CVSCO) mozilla/client.mk mozilla/build/unix/modules.mk
+	@cd $(TOPSRCDIR) && \
+	$(MAKE) -f client.mk real_fast-update
+
+real_fast-update:
+#	@: Start the update. Split the output to the tty and a log file. \
+#	 : If it fails, touch an error file because "tee" hides the error.
+	@failed=.fast_update-failed.tmp; rm -f $$failed*; \
+	fast_update() { (config/cvsco-fast-update.pl $$@ || touch $$failed) 2>&1 | tee -a $(CVSCO_LOGFILE) && \
+	  if test -f $$failed; then false; else true; fi; }; \
+	cvs_co() { echo "$$@" ; \
+	  ("$$@" || touch $$failed) 2>&1 | tee -a $(CVSCO_LOGFILE) && \
+	  if test -f $$failed; then false; else true; fi; }; \
+	fast_update $(CVSCO_NSPR) && \
+	cd $(ROOTDIR) && \
+	failed=mozilla/.fast_update-failed.tmp && \
+	cvs_co $(CVSCO_NSS) && \
+	failed=.fast_update-failed.tmp && \
+	cd mozilla && \
+	fast_update $(CVSCO_PSM) && \
+	fast_update $(CVSCO_LDAPCSDK) && \
+	fast_update $(CVSCO_ACCESSIBLE) && \
+	fast_update $(CVSCO_GFX2) && \
+	fast_update $(CVSCO_IMGLIB2) && \
+	$(FASTUPDATE_CALENDAR) && \
+	$(FASTUPDATE_LIBART) && \
+	fast_update $(CVSCO_SEAMONKEY) && \
+	fast_update $(CVSCO_NOSUBDIRS)
+	@echo "fast_update finish: "`date` | tee -a $(CVSCO_LOGFILE)
+#	@: Check the log for conflicts. ;
+	@conflicts=`egrep "^C " $(CVSCO_LOGFILE)` ;\
+	if test "$$conflicts" ; then \
+	  echo "$(MAKE): *** Conflicts during fast-update." ;\
+	  echo "$$conflicts" ;\
+	  echo "$(MAKE): Refer to $(CVSCO_LOGFILE) for full log." ;\
+	  false; \
+	else true; \
+	fi
+ifdef RUN_AUTOCONF_LOCALLY
+	@echo Generating configures using $(AUTOCONF) ; \
+	cd $(TOPSRCDIR) && $(AUTOCONF) && \
+	cd $(TOPSRCDIR)/nsprpub && $(AUTOCONF) && \
+	cd $(TOPSRCDIR)/directory/c-sdk && $(AUTOCONF)
+endif
+
+####################################
+# Web configure
+
+WEBCONFIG_FILE  := $(HOME)/.mozconfig
+
+MOZCONFIG2CONFIGURATOR := build/autoconf/mozconfig2configurator
+webconfig:
+	@cd $(TOPSRCDIR); \
+	url=`$(MOZCONFIG2CONFIGURATOR) $(TOPSRCDIR)`; \
+	echo Running mozilla with the following url: ;\
+	echo ;\
+	echo $$url ;\
+	mozilla -remote "openURL($$url)" || \
+	netscape -remote "openURL($$url)" || \
+	mozilla $$url || \
+	netscape $$url ;\
+	echo ;\
+	echo   1. Fill out the form on the browser. ;\
+	echo   2. Save the results to $(WEBCONFIG_FILE)
+
+#####################################################
+# First Checkout
+
+ifdef _IS_FIRST_CHECKOUT
+# First time, do build target in a new process to pick up new files.
+build::
+	$(MAKE) -f $(TOPSRCDIR)/client.mk build
+else
+
+#####################################################
+# After First Checkout
+
+
+####################################
+# Configure
+
+CONFIG_STATUS := $(wildcard $(OBJDIR)/config.status)
+CONFIG_CACHE  := $(wildcard $(OBJDIR)/config.cache)
+
+ifdef RUN_AUTOCONF_LOCALLY
+EXTRA_CONFIG_DEPS := \
+	$(TOPSRCDIR)/aclocal.m4 \
+	$(wildcard $(TOPSRCDIR)/build/autoconf/*.m4) \
+	$(NULL)
+
+$(TOPSRCDIR)/configure: $(TOPSRCDIR)/configure.in $(EXTRA_CONFIG_DEPS)
+	@echo Generating $@ using autoconf
+	cd $(TOPSRCDIR); $(AUTOCONF)
+endif
+
+CONFIG_STATUS_DEPS_L10N := $(wildcard $(TOPSRCDIR)/l10n/makefiles.all)
+
+CONFIG_STATUS_DEPS := \
+	$(TOPSRCDIR)/configure \
+	$(TOPSRCDIR)/allmakefiles.sh \
+	$(TOPSRCDIR)/.mozconfig.mk \
+	$(wildcard $(TOPSRCDIR)/nsprpub/configure) \
+	$(wildcard $(TOPSRCDIR)/directory/c-sdk/configure) \
+	$(wildcard $(TOPSRCDIR)/mailnews/makefiles) \
+	$(CONFIG_STATUS_DEPS_L10N) \
+	$(wildcard $(TOPSRCDIR)/themes/makefiles) \
+	$(NULL)
+
+# configure uses the program name to determine @srcdir@. Calling it without
+#   $(TOPSRCDIR) will set @srcdir@ to "."; otherwise, it is set to the full
+#   path of $(TOPSRCDIR).
+ifeq ($(TOPSRCDIR),$(OBJDIR))
+  CONFIGURE := ./configure
+else
+  CONFIGURE := $(TOPSRCDIR)/configure
+endif
+
+ifdef _OBJ2SRCPATH
+CONFIGURE_ARGS := --srcdir=$(_OBJ2SRCPATH) $(CONFIGURE_ARGS)
+endif
+
+$(OBJDIR)/Makefile $(OBJDIR)/config.status: $(CONFIG_STATUS_DEPS)
+	@if test ! -d $(OBJDIR); then $(MKDIR) $(OBJDIR); else true; fi
+	@echo cd $(OBJDIR);
+	@echo $(CONFIGURE) $(CONFIGURE_ARGS)
+	@cd $(OBJDIR) && $(CONFIGURE_ENV_ARGS) $(CONFIGURE) $(CONFIGURE_ARGS) \
+	  || ( echo "*** Fix above errors and then restart with\
+               \"$(MAKE) -f client.mk build\"" && exit 1 )
+	@touch $(OBJDIR)/Makefile
+
+ifdef CONFIG_STATUS
+$(OBJDIR)/config/autoconf.mk: $(TOPSRCDIR)/config/autoconf.mk.in
+	cd $(OBJDIR); \
+	  CONFIG_FILES=config/autoconf.mk ./config.status
+endif
+
+
+####################################
+# Depend
+
+depend:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
+	$(MOZ_MAKE) export && $(MOZ_MAKE) depend
+
+####################################
+# Build it
+
+build::  $(OBJDIR)/Makefile $(OBJDIR)/config.status
+	$(MOZ_MAKE)
+
+####################################
+# Other targets
+
+# Pass these target onto the real build system
+install export libs clean realclean distclean alldep:: $(OBJDIR)/Makefile $(OBJDIR)/config.status
+	$(MOZ_MAKE) $@
+
+cleansrcdir:
+	@cd $(TOPSRCDIR); \
+        if [ -f webshell/embed/gtk/Makefile ]; then \
+          $(MAKE) -C webshell/embed/gtk distclean; \
+        fi; \
+	if [ -f Makefile ]; then \
+	  $(MAKE) distclean ; \
+	else \
+	  echo "Removing object files from srcdir..."; \
+	  rm -fr `find . -type d \( -name .deps -print -o -name CVS \
+	          -o -exec test ! -d {}/CVS \; \) -prune \
+	          -o \( -name '*.[ao]' -o -name '*.so' \) -type f -print`; \
+	   build/autoconf/clean-config.sh; \
+	fi;
+
+# (! IS_FIRST_CHECKOUT)
+endif
+
+.PHONY: checkout real_checkout depend build export libs alldep install clean realclean distclean cleansrcdir pull_all build_all clobber clobber_all pull_and_build_all everything

mozilla/mstone/Building

@@ -1,46 +0,0 @@
-Mstone building instructions
-
-For Unix, just "gmake" one of these
-	release		The usual optimized build
-	debug		Debug build includes some asserts
-
-	rpackage	Build the release and package it
-	dpackage	Build the debug version and package it
-
-	all_OPT		Build a multi-platform package
-	all_DBG		Build a multi-platform debug package
-
-For NT, run autobuild.bat.  This will build and package both the debug
-and optimized versions.  Perl must already be built and installed in
-\.  The NT build may be behind the Unix stuff.  Pull the build/package/*
-subdirectories into the main build/package before doing a 'make all_???'.
-
-You can build multiple OSes in the same tree.  Debug and optimized
-builds are kept separately.  The all_??? targets will combine whatever
-OSes are present into a multi-architecture package (including NT).
-Note that you have ot build and package each OS before doing the all_
-step.
-
-
-Helper components
-
-Linux usually comes with workable versions of gnuplot and perl.  Most
-other OSes don't.  Mstone can build and package perl, gnuplot, and gd
-with the right settings.  These will be automatically built and
-packaged if they are present.
-
-Unpack gd1.3 or later in the mstone directory.  You can probably find
-gd from here: http://www.boutell.com/gd/.  The directory should look
-like gd?.*.  Right now we need the (obsolete) version 1.3 to generate
-GIF files (without patented run-length coding).  The scripts need to
-be updated to be able to handle PNG or GIF files.
-
-Unpack gnuplot 3.7 or later in the mstone directory.  You can probably
-find gnuplot from http://www.cs.dartmouth.edu/gnuplot_info.html.  The
-directory should look like gnuplot-?.* (the exact version should not
-matter).  Gnuplot requres gd to generate GIFs (which is what we need).
-
-Unpack perl 5.005 or later in the mstone directory.  You can probably
-find perl from http://www.perl.com/pub/language/info/software.html.
-The directory should look like perl5.* (the exact version should
-not matter).

mozilla/mstone/ChangeLog

@@ -1,73 +0,0 @@
-2005-02-19  Dan Christian  <robodan@idiom.com>
-
-	* Merge big Sendmail patch see ChangeLog-Sendmail for details
-
-	* src/bench.h (VERSION): Start working toward version 5.0 (now 4.9)
-
-2004-09-07  Dan Christian  <robodan@idiom.com>
-
-	* data/*.msg: Updated with more realistic messages
-
-	* bin/args.pl: Really fix doc link to be relative
-
-	* src/smtp.c (sendSMTPLoop): Handle file lists (random selection)
-	(sendFile): New, send file with option offset and head/tail
-	(SmtpFilePrep): Split a glob pattern to a list
-	(SmtpFileInit): New, split out initial file scan
-
-	* src/bench.c (rangeNext): Get to last value in a random range
-
-2004-06-14  Dan Christian  <robodan@idiom.com>
-
-	* Makefile (VERSION): Bump version to 4.3
-
-	* Make build work on recent versions of Linux and Solaris
-
-	* Make ssh the default way to get a remote shell
-
-	* Support SVG graph output (not supported by all browsers)
-
-	* Use rfc822 style from addresses
-
-	* Fix documentation link on index page to be local
-
-2000-04-28  Dan Christian  <dac@x.cx>
-
-	* http and wmap now use common routines from http-util
-
-	* http is now separated from the pish command structure.
-
-2000-04-27  Dan Christian  <dac@x.cx>
-
-	* bin/genplot.pl: Support gnuplot generating images other than gif
-
-	* src/smtp.c (sendSMTPStart): Send domain name with HELO
-
-2000-04-05  Dan Christian <robodan@netscape.com>
-	* Fix bug in WMAP where the login field was reporting banner data.
-
-	* Add a reconnect concept to WMAP.  This separates out the
-	reconnect activity from the initial connections.  There is still a
-	bug/feature that the reconnect increments an error which can
-	eventually hit the maxErrors limit.  You have to record the error
-	or else you could not get the "connections" graph right.
-	
-2000-03-31  Dan Christian <robodan@netscape.com>
-	
-	* Merged setup and mstone into one script to reduce command
-	namespace polution.  "mstone setup" is the the same as "setup".
-
-	* Made setup try to be more tolerant of OSes that were not
-	include in the distribution.  SunOS 5.7 will fall back to 5.6.
-
-	* Now package conf/general.wld.in and only copy to general.wld if
-	there isn't one already in place.  This means that you can unpack
-	new bits over old bits without blowing away your configuration.
-	
-	* Added <includeOnce file> command to workloads.  This allows
-	tests to be used either as a stand alone or as part of another
-	test (e.g. smtp).
-
-	* Converted ChangeLog to more common formating
-
-	* Spilt off old ChangeLog entries to ChangeLog.1 and ChangeLog.2

mozilla/mstone/ChangeLog-Sendmail

@@ -1,86 +0,0 @@
-2005-02-03  Thom O'Connor <thom@sendmail.com>
-
-        * Merge Mozilla mstone HEAD with Sendmail,Inc. modifications. In
-          particular, this included some hand-waving around the bitwise
-          operators "leaveMailOnServer" in the Mozilla branch and the
-          dinst_t struct pish->leaveMailOnServerDist.
-
-2005-01-25  Thom O'Connor <thom@sendmail.com>
-
-        * Fix comments, properly attribute Sean O'Rourke's contributions.
-
-2004-09-21  Thom O'Connor <thom@sendmail.com>
-
-	* Modified config/config.mk to build SSL version of mailclient.
-
-2004-06-07  Thom O'Connor <thom@sendmail.com>
-
-	* Remove _thread_sys_poll defininition for poll in FreeBSD builds
-	(bench.h).
-
-2001-04-27  Sean O'Rourke  <sean@sendmail.com>
-
-	* distributions can now be truncated.  This is used to prevent
-	0-recipient messages, and could be used to prevent enormous
-	messages.
-
-	* throttling: Preload workloads use some additional mstone magic
-	to throttle delivery rate based on server responsiveness.  This is
-	still in the experimental phase, and may change.
-
-	* fix for parsing bug exposed by distribution truncation notation.
-	
-2001-03-10    Sean O'Rourke <sean@sendmail.com>
-
-	* clients: Fixed up code for specifying client counts on a
-	per-host or per-group basis.  This eliminates the need to force
-	the mozilla distribution code to do one's bidding.
-
-	* smtpsink.pl: Very basic threaded perl SMTP sink.  This may go
-	away to be replaced by the sink from smtpslam.  Needs much better
-	statistics.
-
-2001-02-24    Sean O'Rourke <sean@sendmail.com>
-
-	* checksums added.  See {checksum,md5}.{c,h}.  Auto-generated
-	messages can currently have checksums computed over the body, and
-	pop and multipop retrieval will verify the sum.
-
-2001-02-21    Sean O'Rourke <sean@sendmail.com>
-
-	* MIME generation changed to generate deep messages rather than
-	  several parts.  This should be a better test of MIME parsers,
-	  forcing them to save more state.
-
-2001-02-18    Sean O'Rourke <sean@sendmail.com>
-
-	* mstone_changes.html: update SSL documentation.
-
-	* wld, defaults.pm: divide the ever-expanding "config" section
-	  into more descriptive subparts: clients, server, sink, mstone.
-
-	* report: now in bin directory, where it should be.
-
-2001-02-17    Sean O'Rourke <sean@sendmail.com>
-
-	* client.c, main.c, parse.c: removed old throttling code, as it
-	  wasn't being used.
-	
-	* ALL: General code cleanup.
-	
-	* sysdep.c: simplified rlimit-bumping code, added increase for
-	  RLIM_NPROC, as threads are procs on some systems.
-
-	* imap4.c: removed silliness of malloc()ing a buffer the size of
-	  the entire message every time we retrieve a message.
-
-	* xalloc.c, xalloc.h: consolidated memory allocation so everyone
-	  handles OOM the same way (for now, dump core).
-
-	* constants.h: various assumptions and limits, were in bench.h.
-
-	* events: added event-queue model to reduce thread requirements.
-	  Eventually, it would be nice for a consultant to be able to run
-	  this off a laptop to test a small- to medium-sized box.  For
-	  now, at least, configuration remains the same.  This doesn't
-	  work on NT.  Oh, well.

mozilla/mstone/ChangeLog.1

@@ -1,129 +0,0 @@
-MailStone 4.1: Changes to since version 4.0
-	
-	* threads are used on all platforms reduces memory requirements by
-	10x for large numbers of clients must run as root for maximum
-	connections per process
-	
-	* massive internal code and script cleanup / rewrite performance
-	improvements for socket handling (blocking) and caching files and
-	name lookups
-	
-	* filename and path conventions restructuring '/mailstone'
-	hardwired path no longer required mailstone/results/index.html
-	(index of test runs) mailstone/results/<datestamp>/stderr (look
-	here for errors) mailstone/results/<datestamp>/results.html
-	mailstone/results/<datestamp>/results.txt
-	mailstone/results/<datestamp>/work.wld (workload config used)
-	mailstone/results/<datestamp>/testbed.tbd (testbed used)
-	mailstone/results/<datestamp>/summary.csv (per client summary)
-	mailstone/results/<datestamp>/*.gif (graphs)
-	mailstone/tmp/<datestamp>/*.out (raw results from each client)
-	mailstone/conf/*.wld (workload file) mailstone/conf/*.html
-	(machine descriptions for reports) mailstone/data/*.msg (sample
-	test messages)
-	
-	* periodic statistics reporting allows for trend analysis of many
-	variables per protocol.  sampling rate is automatically determined
-	by mailmaster Can now generate on-the-fly reports for above by
-	running "process"
-	
-	* The accountFormat directive is now obsolete.  Use loginFormat
-	and addressFormat instead.
-	
-	* The numAccounts and beginAccounts directives are now obsolete.
-	Use numLogins, firstLogin, numAddresses, and firstAddress instead.
-	
-	* The sequentialLogins directive disables random account number
-	selection.  This insures a predictable account sequence.
-	
-	* The checkMailInterval directive for IMAP is now obsolete.  Use
-	loopDelay instead.
-	
-	* The directives idleTime, loopDelay, and numLoops now apply to
-	all protocols.  See the manual for how loopDelay and numLoops are
-	used by each protocol.
-	
-	* a command directive such as <SMTP> without HOSTS=xxx will now
-	apply to all clients in the testbed
-	
-	* <include> directive for workload and testbed files (e.g. for
-	user profile)
-	
-	* workloads are now passed to 'mailclient' through stdin no test
-	specific files need to be copied to client machines more
-	synchonized test startup
-	
-	* 'setup' script will copy mailclient and test messages
-	(data/*.msg) to each testbed machine in /var/tmp
-	
-	* 'cleanup' form of setup will remove mailclient and test messages
-	from each testbed machine in /var/tmp
-	
-	* 'checktime' form of setup will (nearly) simultaneously retrieve
-	time from each client.  This lets you easily check for clock
-	problems.
-	
-	* 'timesync' form of setup will (nearly) simultaneously set time
-	on each client.  This only works on OSs that support setting
-	seconds through the "date" command.  rdate or ntpdate should be
-	used if available.  You must be the root user and be able to rsh
-	as root for timesync to work.
-	
-	* Improved reports in text and html (formatting and content)
-	
-	* The text version of the report is now only displayed
-	automatically if "-v" is given.
-	
-	* Graphs with more than one protocol will also display a "Total"
-	graph
-	
-	* The graphs can now be customized for each test (see sample.wld
-	for the default)
-	
-	* You can now add graphs (in addition to the default or configured
-	ones) by using "process timestamp -a conf/moregraph.wld".
-	
-	* An informative index of test runs is now generated in
-	results/index.html
-	
-	* The index is updated while the run is in progress to make
-	checking for errors easier.
-	
-	* The error log now displays times relative to test start.
-	
-	* Memory use while processing results has been greatly reduced.
-	
-	* A summary of the data from each process is now saved in a
-	Comma-separated-value (CSV) file.  results/timestamp/clients.csv
-	
-	* A summary of the data over time is now saved in a
-	Comma-separated-value (CSV) file.
-	results/timestamp/protocol-time.csv
-	
-	* new gnuplot binary included, can output directly to gif format
-	
-	* read and write performance numbers now reported separately
-	
-	* new runtime banners and copyrights (ooh boy)
-	
-	* idleTime option for IMAP fixed, plus now applies to all commands
-	
-	* blockTime now sets a delay between command blocks
-	
-	* Process model is as follows
-	  User runs the top-level 'mstone' script
-	  This calls 'conf/testname.pl' with command line arguments
-	  This calls 'mailmaster.pl' with config and command line arguments
-	  mailmaster uses 'rsh' or equivalent to launch mailclients
-          mailclient runs on each testbed and forks numprocs
-	  each proc spawns numthreads (one per client)
-
-          <run tests> (note: results are being sent continuously)
-
-          threads send results back through sockets to top mailclient
-	  mailclient forwards results back over stdout via rsh pipe
-          (for future work - do some data reduction/combining here)
-	  mailmaster directs output to each client-<hostname> file
-	  mailmaster launches report generator
-	
-	* sample LDIF fragment for a postmaster entry included

mozilla/mstone/ChangeLog.2

@@ -1,77 +0,0 @@
-MailStone 4.15: Changes to Mailstone since version 4.1
-	
-	* Setup now checks license acceptance and configures a basic
-	setup.  By default, it will also create a user LDIF file with a
-	'allusers' account.
-	
-	* All parameters and and testbed information may now be specified
-	in the workload files (*.wld).  New sections: CONFIG, CLIENT,
-	MONITOR, PRETEST, and POSTTEST.  Command line parameters still
-	override the files.  A complete copy of the configuration is saved
-	in results/<TIMESTAMP>/all.wld.
-	
-	* The '*.pl', '*.tbd', and 'config*' files in ./conf/ are
-	depreciated.  These should still work, but the new sections are
-	simpler and more flexible.
-	
-	* Any CONFIG parameter can now be specified on the command line
-	using the form: 'PARAMETER=value'.  Note that PARAMETER is case
-	insensitive.  No whitespace is allowed before or after the '='.
-	
-	* The new switch '-l' or CONFIG parameter 'ClientCount' can now
-	specify the total number of clients.  The 'MaxClients' and
-	'MaxThreads' parameters in each CLIENT section control load
-	balancing.  If the 'processes' and 'threads' parameters are set,
-	then the load for that CLIENT section will not be adjusted, but
-	will be taken into account when calculating other CLIENT sections.
-	If just 'processes' is set, then only the thread count will be
-	adjusted.  All hosts in a CLIENT section will run the same number
-	of processes and threads.
-	
-	* bin/makeusers.pl now creates users, broadcast account, etc.
-	Numbered passwords are now suppored.  The new user/password format
-	now replaces '%ld' with the user number to match the rest of
-	mailstone.  The ldif/ directory is obsolete.  Run "perl/bin/perl
-	bin/makeusers.pl -h" for usage.
-	
-	* NT client machines may now be used from a Unix test master.  See
-	conf/sample.wld for configuration details.
-	
-	* Commands can now be run for a specified block count, error
-	count, or time (whichever comes first).  Set 'maxBlocks' and/or
-	'maxErrors'.
-	
-	* Telemetry logging to /var/tmp/mstone-log.pn.tn is now performed
-	when "telemetry 1" is specified.
-	
-	* The name used in the "CLIENT" section is now used to match
-	"HOSTS=..." qualifier.  Compatibility with "hostname" is no longer
-	needed.
-	
-	* Config values can now use quoted characters such as \n, \r, \t
-	
-	* Config values can be continued using \ (backslash)
-	
-	* System configuration information (SYSCONFIG) can now be
-	specified entirely within a workload file by quoting the newlines.
-	
-	* Config values get enclosing double-quotes stripped
-	
-	* Preliminary support for HTTP and WMAP (WebMail) testing.
-	
-	* New table formats are easier to interpret and allow more protocols.
-	
-	* The new text format report is easier to machine processes.
-	
-	* The following command line switches are now obsolete: -f, -g,
-	-e, -p, and -l.  The same functionality can be obtained by
-	FREQUENCY=<interval>, GNUPLOT=<path>, RSH=<path>, RCP=<path>, and
-	TEMPDIR=<directory> respectively.
-	
-	* File backups are now created.  When ./process is run multiple
-	times, the old files are moved to the ./tmp/<TIMESTAMP>/
-	directory.
-	
-	* perl has been updated to include full perl5.005_03 install
-	package.  Perl support for each architecture is now under the
-	perl/ directory.

mozilla/mstone/INSTALL

@@ -1,222 +0,0 @@
-
-		Mstone 4.15 Quick Installation
-
-This version of Mstone runs on many current UNIX platforms and NT.
-Only a web browser and text editor are needed to view the results and
-configure tests.
-
-
-QUICK INSTALL
--------------
-
-IMPORTANT: If you have an existing mstone, save a copy of the
-mstone/conf directory to preserve any configuration files you may want
-to keep.
-
-Unpack distribution:
-
-	tar xzf /tmp/mstone_OPT.tar.gz
-or
-	gunzip -c /tmp/mstone_OPT.tar.gz | tar xf -
-or
-	unzip /tmp/mstone_OPT.zip
-
-	cd mstone
-
-Both the tar.gz file and the zip file are identical.  Use whichever is
-more convenient for you.
-
-This will create a sub-directory named "mstone" with files and
-directories under that.  
-
-cd mstone
-
-NOTE: all scripts must be run from the mstone directory.
-
-
-Do initial configuration:
-
-Run "mstone config".  It will ask you about your system configuration.
-Fill in the appropriate values and create the optional user accounts
-and broadcast account.  When it asks about client machines, enter them
-seperated by commas, with no spaces (e.g. host1,host2,host3).  If you
-need to re-configure, run "mstone config".
-
-The machine starting the test may also be a client.  For accurate
-results, clients should not be run on the test mailserver machine (or
-its directory server).  If all the client machines are not running
-the same operating system version, see "Configuring Client Machines"
-below to configure for different OSes.
-
-When the test master is on NT, only the local machine may be a client
-and only one process is allowed.  You will not be asked about client
-machines.
-
-Setup only configures the most important parameters.  If you have more
-advanced needs, edit conf/general.wld appropriately.
-
-Run "mstone setup".  It will now push the necessary files to each
-client machine.  If there are problems (i.e. with rsh permissions),
-fix them and re-run "mstone setup" until everything works.
-
-
-Install test accounts:
-
-Setup will create a file called conf/MAILHOST.ldif (where MAILHOST is the
-name of your mail server).  If you are not using Netscape Messaging
-and Directory Servers, then you may have to edit the ldif file or use
-alternate means to create the user accounts.
-
-To import these users into Netscape Messaging Server, use "add
-entries" from the directory console or use the ldapmodify command line
-utility.
-
-Note: imports will go faster if access logging is disabled.  For large
-user counts (more than 10,000 users), it may be much faster to export
-the current database, merge the files together manually, and then
-import the new database.
-
-Here is how the ldapmodify supplied with Netscape Messaging Server
-would be used.
-
-setenv LD_LIBRARY_PATH /usr/netscape/messaging/lib
-cd /usr/netscape/messaging
-shared/bin/ldapmodify -h mailhost -a -D 'cn=directory manager' -w d_m_password < conf/MAILHOST.ldif
-
-
-Check time consistency:
-
-IMPORTANT: The system time on each client machine must be synchronized
-within one second of each other for accurate results graphs.
-
-Run "checktime" to see the time on each client.  There should not be
-more than two seconds difference among the displayed time.
-
-The best way to synchronize clients is use NTP (Network Time Protocol)
-or similar protocols (like rdate or timeslave) that have sub second
-accuracy.
-
-A simple utility called "timesync" is provide to push the local
-system time to all clients.  You must be root and have root rsh
-permissions to use timesync.  Timesync only works on OSs that support
-setting seconds using "date MMDDhhmmCCYY.ss".  Timesync is only
-accurate to a second (at best) and should only be used if better
-protocols aren't available.
-
-When running the test master on NT, "checktime" and "timesync" are
-never needed (because there is only one client machine).  Timesync
-will be ignored for NT clients, another method must be used
-(e.g. timeserv or Dimension4).
-
-
-Run tests:
-
-Try it out.  Use small process and thread counts until everything is
-working.
-
-mstone pop -t 30s
-
-The script will tell you how many processes and threads it is running
-on each system and where errors are logged.  At the end of the test,
-it will print out a URL for the test results and an indication of the
-size of the errorlog file (stderr).
-
-The results of the mstone run will display statistics for each
-protocol that was tested.  The results are presented in both a HTML
-web page and a text file.  The text file is simple and uniform, while
-the web page is more user readable.  The web page has links to the
-test configuration files, error log, and the text version.
-
-For long tests run (e.g. 8 hours), the results can be updated while
-the test is running by using the "process" utility.  Don't run
-"process" near the very end of the test.
-
-If a test has to be aborted, then use "process" to generate a report
-using the available data.
-
-
-Customize tests:
-
-Copy and edit the scripts (e.g. "conf/pop.wld") to define new tests.
-The CONFIG section specifies all the attributes used in the test.
-Other sections specify the protocols to be tested and the parameters
-for them.
-
-All switches can be overridden on the command line to facilitate
-easier testing.  The exact configuration (include command line
-overrides) is stored with the results from each test.
-
-
-Maintenance:
-
-You can run "mstone setup" at any time (except during a test :-) to
-update the files on the client machines.
-
-Use "mstone cleanup" to remove the files created by "mstone setup".
-
-After the test is finished, the directories under "tmp/" can be
-compressed or deleted to save space.  All the information about a test
-run is stored in the "results/" directories.
-
-
-Configuring client machines:
-
-Edit conf/general.wld to include CLIENT sections for each machines to
-use.
-
-You can also specify the OS type for each client machine.  Set the
-"Arch" parameter in each CLIENT section as appropriate (e.g. SunOS5.6,
-Linux2.2_x86, AIX4.2, HP-UXB.11.00, IRIX6.5, OSF1V4.0, WINNT4.0). The
-directories under "bin" specify the available OS types.
-
-For NT4.0 clients with a UNIX test master, you will need to configure
-"command" and "tempDir" for proper operation.  See the "HOSTS=winnt01"
-example in conf/sample.wld.
-
-The total number of processes and threads that can be supported on a
-client is dependent on the number of commands in the test, the OS, and
-available memory.  Check the stderr log for messages about not being
-able to create processes or threads.  Check on the client machines
-during the test and make sure they aren't running out of CPU.  The
-UNIX programs "top" and "vmstat" are good for this.  If the client CPU
-is more than 75% busy, use more machines.
-
-Also watch out for network saturation.  You may have to use machines
-with separate networks to the server to reach full server load.
-
-
-Know problems:
-
-There can be extraneous errors or connections after the specified end
-of the test.  These are most likely do to stopping the test and should
-be ignored.
-
-At the end of the test, all current connections will logout without
-any delays.  This can cause very high peak loads.
-
-If one process exits early (due to misconfiguration or resource
-exhaustion) and the monitoring command did not specify a count (%c),
-then the monitoring tasks will be terminated early as well.
-
-Monitoring commands that specify a count (%c), may take longer than
-predicted and delay the processing of test results.  This is because
-vmstat actually delays the requested time plus the time needed to
-generate the statistics summary.
-
-If you are doing tests with large thread counts, you may have to run
-as root to allow mailclient to raise its resource limits.
-
-The telemetry logging for SMTP, POP3, and IMAP4 is incomplete.  Most
-commands are captured, but banners and message contents may be missing.
-
-The MaxBlocks parameter gets divided by the total number of processes
-before starting each client.  This doesn't account for clients that
-don't have commands to run.
-
-The HTTP protocol used by WMAP allows connections to be dropped and
-re-connected as needed.  WMAP logs this as an error and an additional
-connect.  The error log must be consulted to distinguish another types
-of connection errors (timeout or connection refused) from an automatic
-re-connect.
-
-The HTTP protocol test is experimental and subject to change.

mozilla/mstone/LICENSE

@@ -1,19 +0,0 @@
-The contents of this software package are subject to the Netscape
-Public License Version 1.1 (the "License"); you may not use this
-software except in compliance with the License. You may obtain a copy
-of the License at http://www.mozilla.org/NPL/
-
-Software distributed under the License is distributed on an "AS IS"
-basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-the License for the specific language governing rights and limitations
-under the License.
-
-Alternatively, the this software package may be used under the terms
-of the GNU Public License (the "GPL"), in which case the provisions of
-the GPL are applicable instead of those above.  If you wish to allow
-use of your version of this file only under the terms of the GPL and
-not to allow others to use your version of this file under the NPL,
-indicate your decision by deleting the provisions above and replace
-them with the notice and other provisions required by the GPL.  If you
-do not delete the provisions above, a recipient may use your version
-of this file under either the NPL or the GPL.

mozilla/mstone/LICENSE.npl

@@ -1,535 +0,0 @@
-                          MOZILLA PUBLIC LICENSE
-                                Version 1.1
-
-                              ---------------
-
-1. Definitions.
-
-     1.0.1. "Commercial Use" means distribution or otherwise making the
-     Covered Code available to a third party.
-
-     1.1. "Contributor" means each entity that creates or contributes to
-     the creation of Modifications.
-
-     1.2. "Contributor Version" means the combination of the Original
-     Code, prior Modifications used by a Contributor, and the Modifications
-     made by that particular Contributor.
-
-     1.3. "Covered Code" means the Original Code or Modifications or the
-     combination of the Original Code and Modifications, in each case
-     including portions thereof.
-
-     1.4. "Electronic Distribution Mechanism" means a mechanism generally
-     accepted in the software development community for the electronic
-     transfer of data.
-
-     1.5. "Executable" means Covered Code in any form other than Source
-     Code.
-
-     1.6. "Initial Developer" means the individual or entity identified
-     as the Initial Developer in the Source Code notice required by Exhibit
-     A.
-
-     1.7. "Larger Work" means a work which combines Covered Code or
-     portions thereof with code not governed by the terms of this License.
-
-     1.8. "License" means this document.
-
-     1.8.1. "Licensable" means having the right to grant, to the maximum
-     extent possible, whether at the time of the initial grant or
-     subsequently acquired, any and all of the rights conveyed herein.
-
-     1.9. "Modifications" means any addition to or deletion from the
-     substance or structure of either the Original Code or any previous
-     Modifications. When Covered Code is released as a series of files, a
-     Modification is:
-          A. Any addition to or deletion from the contents of a file
-          containing Original Code or previous Modifications.
-
-          B. Any new file that contains any part of the Original Code or
-          previous Modifications.
-
-     1.10. "Original Code" means Source Code of computer software code
-     which is described in the Source Code notice required by Exhibit A as
-     Original Code, and which, at the time of its release under this
-     License is not already Covered Code governed by this License.
-
-     1.10.1. "Patent Claims" means any patent claim(s), now owned or
-     hereafter acquired, including without limitation,  method, process,
-     and apparatus claims, in any patent Licensable by grantor.
-
-     1.11. "Source Code" means the preferred form of the Covered Code for
-     making modifications to it, including all modules it contains, plus
-     any associated interface definition files, scripts used to control
-     compilation and installation of an Executable, or source code
-     differential comparisons against either the Original Code or another
-     well known, available Covered Code of the Contributor's choice. The
-     Source Code can be in a compressed or archival form, provided the
-     appropriate decompression or de-archiving software is widely available
-     for no charge.
-
-     1.12. "You" (or "Your")  means an individual or a legal entity
-     exercising rights under, and complying with all of the terms of, this
-     License or a future version of this License issued under Section 6.1.
-     For legal entities, "You" includes any entity which controls, is
-     controlled by, or is under common control with You. For purposes of
-     this definition, "control" means (a) the power, direct or indirect,
-     to cause the direction or management of such entity, whether by
-     contract or otherwise, or (b) ownership of more than fifty percent
-     (50%) of the outstanding shares or beneficial ownership of such
-     entity.
-
-2. Source Code License.
-
-     2.1. The Initial Developer Grant.
-     The Initial Developer hereby grants You a world-wide, royalty-free,
-     non-exclusive license, subject to third party intellectual property
-     claims:
-          (a)  under intellectual property rights (other than patent or
-          trademark) Licensable by Initial Developer to use, reproduce,
-          modify, display, perform, sublicense and distribute the Original
-          Code (or portions thereof) with or without Modifications, and/or
-          as part of a Larger Work; and
-
-          (b) under Patents Claims infringed by the making, using or
-          selling of Original Code, to make, have made, use, practice,
-          sell, and offer for sale, and/or otherwise dispose of the
-          Original Code (or portions thereof).
-
-          (c) the licenses granted in this Section 2.1(a) and (b) are
-          effective on the date Initial Developer first distributes
-          Original Code under the terms of this License.
-
-          (d) Notwithstanding Section 2.1(b) above, no patent license is
-          granted: 1) for code that You delete from the Original Code; 2)
-          separate from the Original Code;  or 3) for infringements caused
-          by: i) the modification of the Original Code or ii) the
-          combination of the Original Code with other software or devices.
-
-     2.2. Contributor Grant.
-     Subject to third party intellectual property claims, each Contributor
-     hereby grants You a world-wide, royalty-free, non-exclusive license
-
-          (a)  under intellectual property rights (other than patent or
-          trademark) Licensable by Contributor, to use, reproduce, modify,
-          display, perform, sublicense and distribute the Modifications
-          created by such Contributor (or portions thereof) either on an
-          unmodified basis, with other Modifications, as Covered Code
-          and/or as part of a Larger Work; and
-
-          (b) under Patent Claims infringed by the making, using, or
-          selling of  Modifications made by that Contributor either alone
-          and/or in combination with its Contributor Version (or portions
-          of such combination), to make, use, sell, offer for sale, have
-          made, and/or otherwise dispose of: 1) Modifications made by that
-          Contributor (or portions thereof); and 2) the combination of
-          Modifications made by that Contributor with its Contributor
-          Version (or portions of such combination).
-
-          (c) the licenses granted in Sections 2.2(a) and 2.2(b) are
-          effective on the date Contributor first makes Commercial Use of
-          the Covered Code.
-
-          (d)    Notwithstanding Section 2.2(b) above, no patent license is
-          granted: 1) for any code that Contributor has deleted from the
-          Contributor Version; 2)  separate from the Contributor Version;
-          3)  for infringements caused by: i) third party modifications of
-          Contributor Version or ii)  the combination of Modifications made
-          by that Contributor with other software  (except as part of the
-          Contributor Version) or other devices; or 4) under Patent Claims
-          infringed by Covered Code in the absence of Modifications made by
-          that Contributor.
-
-3. Distribution Obligations.
-
-     3.1. Application of License.
-     The Modifications which You create or to which You contribute are
-     governed by the terms of this License, including without limitation
-     Section 2.2. The Source Code version of Covered Code may be
-     distributed only under the terms of this License or a future version
-     of this License released under Section 6.1, and You must include a
-     copy of this License with every copy of the Source Code You
-     distribute. You may not offer or impose any terms on any Source Code
-     version that alters or restricts the applicable version of this
-     License or the recipients' rights hereunder. However, You may include
-     an additional document offering the additional rights described in
-     Section 3.5.
-
-     3.2. Availability of Source Code.
-     Any Modification which You create or to which You contribute must be
-     made available in Source Code form under the terms of this License
-     either on the same media as an Executable version or via an accepted
-     Electronic Distribution Mechanism to anyone to whom you made an
-     Executable version available; and if made available via Electronic
-     Distribution Mechanism, must remain available for at least twelve (12)
-     months after the date it initially became available, or at least six
-     (6) months after a subsequent version of that particular Modification
-     has been made available to such recipients. You are responsible for
-     ensuring that the Source Code version remains available even if the
-     Electronic Distribution Mechanism is maintained by a third party.
-
-     3.3. Description of Modifications.
-     You must cause all Covered Code to which You contribute to contain a
-     file documenting the changes You made to create that Covered Code and
-     the date of any change. You must include a prominent statement that
-     the Modification is derived, directly or indirectly, from Original
-     Code provided by the Initial Developer and including the name of the
-     Initial Developer in (a) the Source Code, and (b) in any notice in an
-     Executable version or related documentation in which You describe the
-     origin or ownership of the Covered Code.
-
-     3.4. Intellectual Property Matters
-          (a) Third Party Claims.
-          If Contributor has knowledge that a license under a third party's
-          intellectual property rights is required to exercise the rights
-          granted by such Contributor under Sections 2.1 or 2.2,
-          Contributor must include a text file with the Source Code
-          distribution titled "LEGAL" which describes the claim and the
-          party making the claim in sufficient detail that a recipient will
-          know whom to contact. If Contributor obtains such knowledge after
-          the Modification is made available as described in Section 3.2,
-          Contributor shall promptly modify the LEGAL file in all copies
-          Contributor makes available thereafter and shall take other steps
-          (such as notifying appropriate mailing lists or newsgroups)
-          reasonably calculated to inform those who received the Covered
-          Code that new knowledge has been obtained.
-
-          (b) Contributor APIs.
-          If Contributor's Modifications include an application programming
-          interface and Contributor has knowledge of patent licenses which
-          are reasonably necessary to implement that API, Contributor must
-          also include this information in the LEGAL file.
-
-               (c)    Representations.
-          Contributor represents that, except as disclosed pursuant to
-          Section 3.4(a) above, Contributor believes that Contributor's
-          Modifications are Contributor's original creation(s) and/or
-          Contributor has sufficient rights to grant the rights conveyed by
-          this License.
-
-     3.5. Required Notices.
-     You must duplicate the notice in Exhibit A in each file of the Source
-     Code.  If it is not possible to put such notice in a particular Source
-     Code file due to its structure, then You must include such notice in a
-     location (such as a relevant directory) where a user would be likely
-     to look for such a notice.  If You created one or more Modification(s)
-     You may add your name as a Contributor to the notice described in
-     Exhibit A.  You must also duplicate this License in any documentation
-     for the Source Code where You describe recipients' rights or ownership
-     rights relating to Covered Code.  You may choose to offer, and to
-     charge a fee for, warranty, support, indemnity or liability
-     obligations to one or more recipients of Covered Code. However, You
-     may do so only on Your own behalf, and not on behalf of the Initial
-     Developer or any Contributor. You must make it absolutely clear than
-     any such warranty, support, indemnity or liability obligation is
-     offered by You alone, and You hereby agree to indemnify the Initial
-     Developer and every Contributor for any liability incurred by the
-     Initial Developer or such Contributor as a result of warranty,
-     support, indemnity or liability terms You offer.
-
-     3.6. Distribution of Executable Versions.
-     You may distribute Covered Code in Executable form only if the
-     requirements of Section 3.1-3.5 have been met for that Covered Code,
-     and if You include a notice stating that the Source Code version of
-     the Covered Code is available under the terms of this License,
-     including a description of how and where You have fulfilled the
-     obligations of Section 3.2. The notice must be conspicuously included
-     in any notice in an Executable version, related documentation or
-     collateral in which You describe recipients' rights relating to the
-     Covered Code. You may distribute the Executable version of Covered
-     Code or ownership rights under a license of Your choice, which may
-     contain terms different from this License, provided that You are in
-     compliance with the terms of this License and that the license for the
-     Executable version does not attempt to limit or alter the recipient's
-     rights in the Source Code version from the rights set forth in this
-     License. If You distribute the Executable version under a different
-     license You must make it absolutely clear that any terms which differ
-     from this License are offered by You alone, not by the Initial
-     Developer or any Contributor. You hereby agree to indemnify the
-     Initial Developer and every Contributor for any liability incurred by
-     the Initial Developer or such Contributor as a result of any such
-     terms You offer.
-
-     3.7. Larger Works.
-     You may create a Larger Work by combining Covered Code with other code
-     not governed by the terms of this License and distribute the Larger
-     Work as a single product. In such a case, You must make sure the
-     requirements of this License are fulfilled for the Covered Code.
-
-4. Inability to Comply Due to Statute or Regulation.
-
-     If it is impossible for You to comply with any of the terms of this
-     License with respect to some or all of the Covered Code due to
-     statute, judicial order, or regulation then You must: (a) comply with
-     the terms of this License to the maximum extent possible; and (b)
-     describe the limitations and the code they affect. Such description
-     must be included in the LEGAL file described in Section 3.4 and must
-     be included with all distributions of the Source Code. Except to the
-     extent prohibited by statute or regulation, such description must be
-     sufficiently detailed for a recipient of ordinary skill to be able to
-     understand it.
-
-5. Application of this License.
-
-     This License applies to code to which the Initial Developer has
-     attached the notice in Exhibit A and to related Covered Code.
-
-6. Versions of the License.
-
-     6.1. New Versions.
-     Netscape Communications Corporation ("Netscape") may publish revised
-     and/or new versions of the License from time to time. Each version
-     will be given a distinguishing version number.
-
-     6.2. Effect of New Versions.
-     Once Covered Code has been published under a particular version of the
-     License, You may always continue to use it under the terms of that
-     version. You may also choose to use such Covered Code under the terms
-     of any subsequent version of the License published by Netscape. No one
-     other than Netscape has the right to modify the terms applicable to
-     Covered Code created under this License.
-
-     6.3. Derivative Works.
-     If You create or use a modified version of this License (which you may
-     only do in order to apply it to code which is not already Covered Code
-     governed by this License), You must (a) rename Your license so that
-     the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape",
-     "MPL", "NPL" or any confusingly similar phrase do not appear in your
-     license (except to note that your license differs from this License)
-     and (b) otherwise make it clear that Your version of the license
-     contains terms which differ from the Mozilla Public License and
-     Netscape Public License. (Filling in the name of the Initial
-     Developer, Original Code or Contributor in the notice described in
-     Exhibit A shall not of themselves be deemed to be modifications of
-     this License.)
-
-7. DISCLAIMER OF WARRANTY.
-
-     COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS,
-     WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
-     WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF
-     DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING.
-     THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE
-     IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT,
-     YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE
-     COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER
-     OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF
-     ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
-
-8. TERMINATION.
-
-     8.1.  This License and the rights granted hereunder will terminate
-     automatically if You fail to comply with terms herein and fail to cure
-     such breach within 30 days of becoming aware of the breach. All
-     sublicenses to the Covered Code which are properly granted shall
-     survive any termination of this License. Provisions which, by their
-     nature, must remain in effect beyond the termination of this License
-     shall survive.
-
-     8.2.  If You initiate litigation by asserting a patent infringement
-     claim (excluding declatory judgment actions) against Initial Developer
-     or a Contributor (the Initial Developer or Contributor against whom
-     You file such action is referred to as "Participant")  alleging that:
-
-     (a)  such Participant's Contributor Version directly or indirectly
-     infringes any patent, then any and all rights granted by such
-     Participant to You under Sections 2.1 and/or 2.2 of this License
-     shall, upon 60 days notice from Participant terminate prospectively,
-     unless if within 60 days after receipt of notice You either: (i)
-     agree in writing to pay Participant a mutually agreeable reasonable
-     royalty for Your past and future use of Modifications made by such
-     Participant, or (ii) withdraw Your litigation claim with respect to
-     the Contributor Version against such Participant.  If within 60 days
-     of notice, a reasonable royalty and payment arrangement are not
-     mutually agreed upon in writing by the parties or the litigation claim
-     is not withdrawn, the rights granted by Participant to You under
-     Sections 2.1 and/or 2.2 automatically terminate at the expiration of
-     the 60 day notice period specified above.
-
-     (b)  any software, hardware, or device, other than such Participant's
-     Contributor Version, directly or indirectly infringes any patent, then
-     any rights granted to You by such Participant under Sections 2.1(b)
-     and 2.2(b) are revoked effective as of the date You first made, used,
-     sold, distributed, or had made, Modifications made by that
-     Participant.
-
-     8.3.  If You assert a patent infringement claim against Participant
-     alleging that such Participant's Contributor Version directly or
-     indirectly infringes any patent where such claim is resolved (such as
-     by license or settlement) prior to the initiation of patent
-     infringement litigation, then the reasonable value of the licenses
-     granted by such Participant under Sections 2.1 or 2.2 shall be taken
-     into account in determining the amount or value of any payment or
-     license.
-
-     8.4.  In the event of termination under Sections 8.1 or 8.2 above,
-     all end user license agreements (excluding distributors and resellers)
-     which have been validly granted by You or any distributor hereunder
-     prior to termination shall survive termination.
-
-9. LIMITATION OF LIABILITY.
-
-     UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT
-     (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL
-     DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,
-     OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
-     ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
-     CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL,
-     WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
-     COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN
-     INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF
-     LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY
-     RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW
-     PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE
-     EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
-     THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
-
-10. U.S. GOVERNMENT END USERS.
-
-     The Covered Code is a "commercial item," as that term is defined in
-     48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer
-     software" and "commercial computer software documentation," as such
-     terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48
-     C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995),
-     all U.S. Government End Users acquire Covered Code with only those
-     rights set forth herein.
-
-11. MISCELLANEOUS.
-
-     This License represents the complete agreement concerning subject
-     matter hereof. If any provision of this License is held to be
-     unenforceable, such provision shall be reformed only to the extent
-     necessary to make it enforceable. This License shall be governed by
-     California law provisions (except to the extent applicable law, if
-     any, provides otherwise), excluding its conflict-of-law provisions.
-     With respect to disputes in which at least one party is a citizen of,
-     or an entity chartered or registered to do business in the United
-     States of America, any litigation relating to this License shall be
-     subject to the jurisdiction of the Federal Courts of the Northern
-     District of California, with venue lying in Santa Clara County,
-     California, with the losing party responsible for costs, including
-     without limitation, court costs and reasonable attorneys' fees and
-     expenses. The application of the United Nations Convention on
-     Contracts for the International Sale of Goods is expressly excluded.
-     Any law or regulation which provides that the language of a contract
-     shall be construed against the drafter shall not apply to this
-     License.
-
-12. RESPONSIBILITY FOR CLAIMS.
-
-     As between Initial Developer and the Contributors, each party is
-     responsible for claims and damages arising, directly or indirectly,
-     out of its utilization of rights under this License and You agree to
-     work with Initial Developer and Contributors to distribute such
-     responsibility on an equitable basis. Nothing herein is intended or
-     shall be deemed to constitute any admission of liability.
-
-13. MULTIPLE-LICENSED CODE.
-
-     Initial Developer may designate portions of the Covered Code as
-     "Multiple-Licensed".  "Multiple-Licensed" means that the Initial
-     Developer permits you to utilize portions of the Covered Code under
-     Your choice of the NPL or the alternative licenses, if any, specified
-     by the Initial Developer in the file described in Exhibit A.
-
-     EXHIBIT A-Netscape Public License.
-
-          "The contents of this file are subject to the Netscape Public
-          License Version 1.1 (the "License"); you may not use this file
-          except in compliance with the License. You may obtain a copy of
-          the License at http://www.mozilla.org/NPL/
-
-          Software distributed under the License is distributed on an "AS
-          IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-          implied. See the License for the specific language governing
-          rights and limitations under the License.
-
-          The Original Code is the Netscape Mailstone code, released
-          March 17, 2000.
-
-          The Initial Developer of the Original Code is Netscape
-          Communications Corporation. Portions created by Netscape are
-          Copyright (C) 1999-2000 Netscape Communications Corporation. All
-          Rights Reserved.
-
-          Contributor(s): Dan Christian <robodan@netscape.com>
-			  Marcel DePaolis <marcel@netscape.com>
-			  Jim Salter <jsalter@netscape.com>
-			  Mike Blakely, David Shak, Brain Williams
-
-          Alternatively, the contents of this file may be used under the
-          terms of the GNU General Public license Version 2 or later
-	  (the "GPL"), in which case the provisions of GPL are
-	  applicable instead of those above.  If you wish to allow use
- 	  of your version of this file only under the terms of the GPL
-	  and not to allow others to use your version of this file
-	  under the NPL, indicate your decision by deleting the
-	  provisions above and replace them with the notice and other
-	  provisions required by the GPL.  If you do not delete the
-	  provisions above, a recipient may use your version of this
-	  file under either the NPL or the GPL License."
-
-     ----------------------------------------------------------------------
-
-     AMENDMENTS
-
-     The Netscape Public License Version 1.1 ("NPL") consists of the
-     Mozilla Public License Version 1.1 with the following Amendments,
-     including Exhibit A-Netscape Public License.  Files identified with
-     "Exhibit A-Netscape Public License" are governed by the Netscape
-     Public License Version 1.1.
-
-     Additional Terms applicable to the Netscape Public License.
-          I. Effect.
-          These additional terms described in this Netscape Public
-          License -- Amendments shall apply to the Mozilla Communicator
-          client code and to all Covered Code under this License.
-
-          II. "Netscape's Branded Code" means Covered Code that Netscape
-          distributes and/or permits others to distribute under one or more
-          trademark(s) which are controlled by Netscape but which are not
-          licensed for use under this License.
-
-          III. Netscape and logo.
-          This License does not grant any rights to use the trademarks
-          "Netscape", the "Netscape N and horizon" logo or the "Netscape
-          lighthouse" logo, "Netcenter", "Gecko", "Java" or "JavaScript",
-          "Smart Browsing" even if such marks are included in the Original
-          Code or Modifications.
-
-          IV. Inability to Comply Due to Contractual Obligation.
-          Prior to licensing the Original Code under this License, Netscape
-          has licensed third party code for use in Netscape's Branded Code.
-          To the extent that Netscape is limited contractually from making
-          such third party code available under this License, Netscape may
-          choose to reintegrate such code into Covered Code without being
-          required to distribute such code in Source Code form, even if
-          such code would otherwise be considered "Modifications" under
-          this License.
-
-          V. Use of Modifications and Covered Code by Initial Developer.
-               V.1. In General.
-               The obligations of Section 3 apply to Netscape, except to
-               the extent specified in this Amendment, Section V.2 and V.3.
-
-               V.2. Other Products.
-               Netscape may include Covered Code in products other than the
-               Netscape's Branded Code which are released by Netscape
-               during the two (2) years following the release date of the
-               Original Code, without such additional products becoming
-               subject to the terms of this License, and may license such
-               additional products on different terms from those contained
-               in this License.
-
-               V.3. Alternative Licensing.
-               Netscape may license the Source Code of Netscape's Branded
-               Code, including Modifications incorporated therein, without
-               such Netscape Branded Code becoming subject to the terms of
-               this License, and may license such Netscape Branded Code on
-               different terms from those contained in this License.
-
-          VI. Litigation.
-          Notwithstanding the limitations of Section 11 above, the
-          provisions regarding litigation in Section 11(a), (b) and (c) of
-          the License shall apply to all disputes relating to this License.
-

mozilla/mstone/Makefile

@@ -1,246 +0,0 @@
-# Makefile for mstone
-# use gmake
-# Builds each of the components and then packages everything
-
-topsrcdir	= .
-
-CP := cp -p
-
-ifndef INCLUDED_CONFIG_MK
-include $(topsrcdir)/config/config.mk
-endif
-
-
-# dynamically find the optional directories names
-LIBGD_DIR	= $(wildcard gd?.*)
-GNUPLOT_DIR	= $(wildcard gnuplot-?.*)
-PERL_DIR	= $(wildcard perl5.*)
-
-# file that we package
-GDFILES		= gd.txt gd.html libgd.* gd.h demoin.gif gddemo giftogd webgif
-GNUPLOTFILES	= gnuplot Copyright gnuplot_x11 gnuplot.1 gnuplot.gih 
-
-VERSION		= 4.3
-TARBALL		= mstone-$(VERSION)-$(NSARCH)$(OBJDIR_TAG).tar.gz
-ZIPFILE		= mstone-$(VERSION)-$(NSARCH)$(OBJDIR_TAG).zip
-TARBALL_ALL	= mstone-$(VERSION)-all$(OBJDIR_TAG).tar.gz
-ZIPFILE_ALL	= mstone-$(VERSION)-all$(OBJDIR_TAG).zip
-
-NTFILES		= mstone.bat process.bat setup.bat
-
-all:: usage
-
-usage::
-	@$(ECHO) "gmake [ release | rpackage | debug | dpackage ]"
-	@$(ECHO) "      [ DIST=/m/dist/mailstone/1999xxxx dist ]"
-	@$(ECHO) "      [ all_DBG | all_OPT ]"
-	@$(ECHO) "perl is" $(PERL_DIR) ". gd is" $(LIBGD_DIR) ". gnuplot is" $(GNUPLOT_DIR) "."
-
-targets::	$(OBJDIR) mailclient
-
-ifneq (,$(LIBGD_DIR))
-targets::	libgd
-endif
-
-ifneq (,$(GNUPLOT_DIR))
-targets::	gnuplot
-endif
-
-ifneq (,$(PERL_DIR))
-targets::	perl
-endif
-
-$(OBJDIR):
-	-mkdir -p $(OBJDIR)
-
-mailclient::
-	@$(ECHO) "\n===== [`date`] making OS_CONFIG=$(NSARCH) BUILD_VARIANT=$(BUILD_VARIANT)\n"
-	cd src; $(MAKE) BUILD_VARIANT=$(BUILD_VARIANT) OBJDIR=../$(OBJDIR) PKGDIR=../$(PKGDIR) all
-
-# Use our top level makefiles to drive the component builds
-libgd $(OBJDIR)/gd/libgd.a::
-	$(MAKE) -f gd.mk LIBGD_DIR=$(LIBGD_DIR) libgd
-
-gnuplot $(OBJDIR)/gnuplot/gnuplot::
-	$(MAKE) -f gnuplot.mk LIBGD_DIR=$(LIBGD_DIR) GNUPLOT_DIR=$(GNUPLOT_DIR) gnuplot
-
-perl $(OBJDIR)/perl/perl::
-	$(MAKE) -f perl.mk PERL_DIR=$(PERL_DIR) perl
-
-# Create packaging binary directories
-# Note: dont make gd or gnuplot here.  For multi-OS, they are links
-mkpkgdirs::	$(PKGDIR)/bin $(PKGDIR)/conf $(PKGDIR)/data $(PKGDIR)/doc
-
-$(PKGDIR)/bin:
-	mkdir -p $(PKGDIR)/bin
-
-$(PKGDIR)/conf:
-	mkdir -p $(PKGDIR)/conf
-
-$(PKGDIR)/data:
-	mkdir -p $(PKGDIR)/data
-
-$(PKGDIR)/doc:
-	mkdir -p $(PKGDIR)/doc
-
-$(PKGDIR)/gd:
-	mkdir -p $(PKGDIR)/gd
-
-$(PKGDIR)/gnuplot:
-	mkdir -p $(PKGDIR)/gnuplot
-
-$(PKGDIR)/perl:
-	mkdir -p $(PKGDIR)/perl
-
-
-# operating system independent share-files (at least for Unix)
-pkg-share-files:: mkpkgdirs
-	@$(ECHO) "\n===== [`date`] making package share-files...\n"
-	$(CP) mstone process $(PKGDIR)
-	(cd $(PKGDIR); [ ! -f setup ] || rm -f setup; ln -s mstone setup)
-	(cd $(PKGDIR); [ ! -f cleanup ] || rm -f cleanup; ln -s mstone cleanup)
-	(cd $(PKGDIR); [ ! -f checktime ] || rm -f checktime; ln -s mstone checktime)
-	(cd $(PKGDIR); [ ! -f timesync ] || rm -f timesync; ln -s mstone timesync)
-	-$(CP) nsarch bin/*.pl $(PKGDIR)/bin
-	-$(CP) conf/*.wld conf/*.wld.in conf/*.html $(PKGDIR)/conf
-	-$(CP) data/*.msg $(PKGDIR)/data
-	-$(CP) doc/*.html doc/*.gif $(PKGDIR)/doc
-	-$(CP) INSTALL $(PKGDIR)
-	-$(CP) README $(PKGDIR)
-	-$(CP) ChangeLog $(PKGDIR)
-	-$(CP) LICENSE $(PKGDIR)
-
-# split out OS specific file so that combined packaging possible (set PKGDIR)
-pkg-arch-files-gd::	 $(PKGDIR)/gd $(OBJDIR)/gd/libgd.a
-	$(CP) $(addprefix $(OBJDIR)/gd/, $(GDFILES)) $(PKGDIR)/gd
-	-$(STRIP) $(PKGDIR)/gd/webgif $(PKGDIR)/gd/giftogd $(PKGDIR)/gd/gddemo
-
-pkg-arch-files-gnuplot::	$(PKGDIR)/gnuplot $(OBJDIR)/gnuplot/gnuplot
-	$(CP) $(addprefix $(OBJDIR)/gnuplot/, $(GNUPLOTFILES)) $(PKGDIR)/gnuplot
-	-$(STRIP) $(PKGDIR)/gnuplot/gnuplot $(PKGDIR)/gnuplot/gnuplot_x11
-
-ifneq (,$(LIBGD_DIR))
-pkg-arch-files::	pkg-arch-files-gd
-endif
-
-ifneq (,$(GNUPLOT_DIR))
-pkg-arch-files::	pkg-arch-files-gnuplot
-endif
-
-pkg-arch-files::	$(PKGDIR)/bin $(OBJDIR)/mailclient
-	@$(ECHO) "\n===== [`date`] making package arch-files...\n"
-	$(CP) $(OBJDIR)/mailclient $(PKGDIR)/bin
-	-$(STRIP) $(PKGDIR)/bin/mailclient
-
-pkg-perl-files:: $(PKGDIR)/bin $(OBJDIR)/perl/perl
-	@$(ECHO) "\n===== [`date`] making package perl-files...\n"
-	$(MAKE) -f perl.mk PERL_DIR=$(PERL_DIR) \
-		BUILD_VARIANT=$(BUILD_VARIANT) \
-		OBJDIR=$(OBJDIR) PKGDIR=$(PKGDIR) package-perl
-	find $(PKGDIR)/perl/lib -name .packlist -exec rm {} \; -print
-	-$(STRIP) $(PKGDIR)/perl/bin/perl
-	-$(STRIP) $(PKGDIR)/perl/bin/a2p
-
-# for combined packaging, this should not be part of pkg-arch-files
-# perl is handled seperately do to its size
-ifneq (,$(PERL_DIR))
-pkg::	pkg-perl-files
-endif
-
-pkg::	targets pkg-share-files pkg-arch-files
-
-tarball:	build/$(TARBALL)
-
-build/$(TARBALL):
-	@$(ECHO) "\n===== [`date`] making os tar file...\n"
-	-rm -f build/$(TARBALL)
-	cd $(dir $(PKGDIR)) && tar cf - . | gzip > ../../$(TARBALL)
-
-zipfile:	build/$(ZIPFILE)
-
-build/$(ZIPFILE):
-	@$(ECHO) "\n===== [`date`] making os zip file...\n"
-	-rm -f build/$(ZIPFILE)
-	cd $(dir $(PKGDIR)) && zip -r -q ../../$(ZIPFILE) .
-
-
-########################################################################
-# Generate a combined build for every Unix OS that is already packaged
-# NT has to be done seperately because it has different file names
-# We have to nuke some old parts, because permissions wont allow overwrites
-# Finally, dont ship perl development headers and libraries
-all_DBG all_OPT::
-	@$(ECHO) "===== [`date`] unified packaging for $@..."
-	$(MAKE) NSARCH=$@ OBJDIR_TAG='' \
-		PKGDIR=$(topsrcdir)/build/package/$@.OBJ/mstone pkg-share-files
-	./ospkg.sh $@.OBJ \
-	    $(notdir $(shell ls -d build/package/[A-Z]*$(subst all,,$@.OBJ)))
-	[ -d $(topsrcdir)/build/package/$@.OBJ/mstone/bin/WINNT4.0 ] \
-		&& cp -p $(NTFILES) $(topsrcdir)/build/package/$@.OBJ/mstone; :
-	-rm -f ./build/mstone-$(VERSION)-$@.tar.gz
-	cd ./build/package/$@.OBJ \
-		&& tar cf - . | gzip > ../../mstone-$(VERSION)-$@.tar.gz
-	-rm -f ./build/mstone-$(VERSION)-$@.zip
-	cd ./build/package/$@.OBJ \
-		&& zip -r -q ../../mstone-$(VERSION)-$@.zip .
-
-
-########################################################################
-# Copy all the packaged trees to the distribution site
-# Copy in the unified tarball and zip file
-# Link mstone to mailstone for Netscape back compatibility
-# Re-map short Linux name to standard Netscape convention
-dist::
-	@[ "$(DIST)" != "" ] || ($(MAKE) usage && /bin/false)
-	@[ ! -d "$(DIST)" ] || ($(ECHO) "Error: $(DIST) already exists" && \
-		$(MAKE) usage && /bin/false)
-	mkdir -p $(DIST)
-	cp -p build/mstone-$(VERSION)-all_*.*[a-z] $(DIST)/
-	(cd build/package; tar cf - *.OBJ) | (cd $(DIST); tar xf - )
-	for l in $(DIST)/*_???.OBJ ; do \
-		(cd $$l; ln -s mstone mailstone); done
-	cd $(DIST); for l in Linux*_???.OBJ ; do \
-		nn=`echo $$l | sed -e 's/_OPT/_glibc_PTH_OPT/' | sed -e 's/_DBG/_glibc_PTH_DBG/'`; \
-		ln -s $$l $$nn; done
-
-# since the default is release mode, this can just work off a dependency
-release::	targets
-#release::
-#	@$(ECHO) "\n===== [`date`] making release build..."
-#	$(MAKE) BUILD_VARIANT=release OBJDIR_TAG=_OPT targets
-	@$(ECHO) "\n===== [`date`] making release build done."
-
-rpackage:: release pkg #tarball zipfile
-#rpackage:: release
-#	@$(ECHO) "\n===== [`date`] making release package..."
-#	$(MAKE) BUILD_VARIANT=release OBJDIR_TAG=_OPT pkg tarball zipfile
-	@$(ECHO) "\n===== [`date`] making release package done."
-
-# since the default is release mode, start a make with the right mode
-debug::	
-	@$(ECHO) "\n===== [`date`] making debug build..."
-	$(MAKE) BUILD_VARIANT=debug OBJDIR_TAG=_DBG targets
-	@$(ECHO) "\n===== [`date`] making debug build done."
-
-# We dont usually bother to tar up a debug build
-dpackage:: debug
-	@$(ECHO) "\n===== [`date`] making debug package..."
-	$(MAKE) BUILD_VARIANT=debug OBJDIR_TAG=_DBG pkg
-	@$(ECHO) "\n===== [`date`] making debug package done."
-
-# These are old and may be broken
-cleanvariant::
-	(cd src; $(MAKE) OBJDIR=../$(OBJDIR) clean)
-	rm -rf $(PKGDIR)
-
-clean::
-	$(MAKE) BUILD_VARIANT=release OBJDIR_TAG=_OPT cleanvariant
-	$(MAKE) BUILD_VARIANT=debug OBJDIR_TAG=_DBG cleanvariant
-
-distcleanvariant::
-	(cd src; $(MAKE) OBJDIR=../$(OBJDIR) distclean)
-	rm -rf $(OBJDIR) $(PKGDIR)
-
-distclean:: clean
-	$(MAKE) BUILD_VARIANT=release OBJDIR_TAG=_OPT distcleanvariant
-	$(MAKE) BUILD_VARIANT=debug OBJDIR_TAG=_DBG distcleanvariant

mozilla/mstone/README

@@ -1,75 +0,0 @@
-
-                    MSTONE 4.2
-
-Mstone is a mail server performance testing tool designed to simulate
-the different types and volume of mail traffic a mail server would
-experience during a peak activity period.  Mstone was formerly known
-as Mailstone.
-
-A quick installation guide is available in INSTALL.
-
-The full Mailstone 4.15 user manual is available at
-http://lxr.mozilla.org/mozilla/source/mstone/doc/MailStone.html
-
-Testing strategy
-----------------
-
-Mstone is capable of opening SMTP, POP3, IMAP4, and other protocol
-connections to mail servers.  The number and type of connections made
-to the mail server is based on a weighted command list which provides
-the ability to test mail server implementation requirements.
-
-A series of perl script allow you to setup client machines, run tests,
-and then cleanup client machine files.  Each client machine has a copy
-of the mailclient program and SMTP message files.  When the test is
-run, the mailclient is started with the proper command line and work load.
-
-After experimenting with mstone loads, you will notice that there
-are a few factors that can distort server the byte and message
-throughput.  You will find that the server byte throughput is related
-to the average SMTP message (file) size.  Also, server throughput, in
-bytes and messages, is affected by larger than normal POP3/IMAP4
-mailboxes.  So it is important to approach the mstone command
-configuration with data collected from existing mail server
-implementations, for example, a customer might say "during our peak
-activity in the morning, we handle up to two thousand employees
-sending an average of 5 messages of 20K average size and receiving 25
-messages of same size". With input like this, you can begin tuning
-mstone to generate relevant data.
-
-There are two important things to consider when reviewing the results of
-mstone performance analysis:  Was the test run on target for
-simulating the type and volume of mail traffic; and did the server, both
-software and machine, handle the load within an acceptable margin?
-
-With this information, it can be determined: whether enough SMTP
-connections were made to the server during the run, and how many
-messages were downloaded over how many POP3/IMAP4 connections.  If the
-number of SMTP connections is not in the acceptable range, then
-consider adding more client processes/machines or checking the server
-performance during the run.  The message/connection ratio for
-POP3/IMAP4 should be checked for soundness, and adjustments should be
-made to the mailboxes before running the next test.
-
-Monitoring the server performance during test runs is crucial in
-understanding the results.  If the number of client connections is not
-being achieved and the server cpu usage and process run queue is not
-settling down after the initial spike, then modifications to the server
-architecture could be in order.
-
-The analysis of mstone results is an iterative process of client
-(mstone client) and server tuning.  The bottom line is to determine
-whether the messaging solution can handle the type of load expected in
-an acceptable manner.
-
-
-Server Log Tuning
------------------
-The Messaging and Directory server ship with access logging enabled by
-default.  This gives the most information about what is going on in
-the system, but can reduce performance.  You should test the way the
-system will be run.  
-
-Noticeable performance increases are often obtained by disabling access
-logging on the directory server and by reducing the logging level of
-the messaging servers from "Notice" to "Warning".

mozilla/mstone/README.Sendmail-contributions

@@ -1,16 +0,0 @@
-Under the terms of the Mozilla Public License, Version 1.1, granted
-by Mozilla, Sendmail Inc. is contributing the following Source Code
-changes to the Mozilla mstone source repository.
-
-Sendmail, Inc. is making available these source code modifications
-according to the Distribution Obligations as listed in section 3
-of the Mozilla Public License, Version 1.1
-
-The changes provided herein are described in the included files:
-
-  README.Sendmail-mstone_changes.html
-  ChangeLog-Sendmail
-
-All modifications are derived, directly or indirectly, from the original
-code as provided by Mozilla.
-

mozilla/mstone/README.Sendmail-mstone_changes.html

@@ -1,419 +0,0 @@
-<html>
-<head><title>Sendmail, Inc. Mstone changes</title></head>
-<body>
-
-<h3>Mstone modifications</h3>
-
-<ol>
-<li><h4>Random Variable Parameters</h4>
-
-In addition to taking on constant values, some parameters can now be
-sampled from probability distributions.  These variables are:
-<ul>
-<li><code>startDelay</code>
-<li><code>idleTime</code>
-<li><code>blockTime</code>
-<li><code>loopDelay</code>
-<li><code>numRecips</code>
-<li><code>size</code>
-<li><code>headers</code>
-<li><code>mime</code>
-<li><code>leaveMailOnServer</code>
-<li><code>bandwidth</code>
-<li><code>latency</code>
-</ul>
-
-<p>
-The following distributions are currently implemented:
-<ul>
-<li>Uniform (~unif(a, b))
-<li>Normal (~normal(a, b))
-<li>Log-Normal (~lognormal(a, b))
-<li>Weibull (~weib(a, b, c))
-<li>Exponential (~exp(a))
-<li>Constant (~const(a))
-<li>Binomial (~binomial(a))
-</ul>
-
-<p>
-Sampled values may also be constrained by a minimum and maximum value.
-This is particularly useful for e.g. the normal and lognormal
-distributions, though over-tight constraints will create a "lump" at
-the end of the generated distribution, and any constraints may change
-the distribution's characteristics (e.g. mean).  To specify
-constraints, do the following:
-
-<h5>getdist</h5>
-
-<p>
-There is also a helper tool called "getdist" in the Sendmail mstone
-distribution. Building getdist:
-
-<pre>
-  file: mstone/src/idle.c
-  # gcc -DTEST_PROB -Dxalloc=malloc -Dxfree=free -lm idle.c
-</pre>
-
-<p>
-Rename the resulting binary to "getdist"
-
-<p>
-<b>Using getdist</b>
-
-<p>
-To run it interactively:
-
-<ol>
-<li>Start up getdist</li>
-<li>Enter the distribution you want to see a sample and mean (ignore warning about 'gets()')</li>
-</ol>
-
-<p>
-Example:
-
-<pre>
-% getdist
-warning: this program uses gets(), which is unsafe.
-~lognormal(3,4.5)
-Samples:
-6.846493
-0.109578
-31.402784
-0.467486
-21.905714
-7.113645
-0.225102
-29.372181
-4.252427
-1.444493
-mean: 29.128932
-</pre>
-
-<p>
-It will only OUTPUT 10 samples as examples but the mean
-is calculated based on 2000 samples by default.  You can specify
-the mean sample size on the command line by giving it a -n option:
-
-<pre>
-% getdist -n 1000000
-</pre>
-
-<p>
-This will calculate the mean based on a sample of 1000000 entries.
-
-<p>
-The above data was calculated with 2M samples.
-
-<p>
-<i>Known Problems</i><BR>
-It appears (anecdotally) that the first set of samples returned by
-getdist are inaccurate. After starting the getdist program interactively,
-it may appear necessary to ignore the first set of output, but that entering
-the distribution again will return a more accurate result.<BR>
-
-<p>
-For example:
-
-<pre>
-# getdist
-~lognormal(10,2)
-Samples:
-670043.575395
-48.842052
-54.039792
-0.460849
-2.152179
-32.534664
-6.163511
-42.827706
-27.806642
-4.966444
-mean:   364.747532
-var:    224352671.855287
-stddev: 14978.406853
-~lognormal(10,2)
-Samples:
-1.842800
-39.760727
-4.798239
-10.722216
-27.052030
-28.923926
-61.504273
-20.743583
-5.373420
-42.195531
-mean:   25.510130
-var:    2674.124997
-stddev: 51.711942
-</pre>
-
-
-<dl>
-  <dt><code>~dist(...) : [min,]</code>
-  <dd>force all sampled values to be >= <code>min</code>
-  <dt><code>~dist(...) : [min,max]</code>
-  <dd>force all sampled values X to be <code>min</code> <= X <= <code>max</code>.
-  <dt><code>~dist(...) : [,max]</code>
-  <dd>force values to be <= <code>max</code>
-</dl>
-
-<li><h4>Parsing Changes</h4>
-
-All of the time-valued test parameters except <code>rampTime</code>
-and <code>time</code> now have millisecond values.  In particular,
-this means that a value of "17" parses to 17
-<strong>milliseconds</strong>, not 17 seconds.  Use "17s" instead.
-<p>
-
-    Size-valued parameters can have units of "k" or "m" to indicate
-kilobytes or megabytes, respectively.
-<p>
-
-    For parameters supporting random-variable values, a value starting
-with "~" will be interpreted as a random variable specification of the
-form "~NAME([ARGS ...])".  Unit suffixes (e.g. "s", and "m") apply to
-random variable parameters as well as constant values.  This implies
-that for unitless parameters, the suffixes corresponding to the random
-variable's units will still be recognized (i.e. the values will be
-multiplied by the appropriate factors).  This is probably best
-considered as a "bug" rather than excercised as a "feature."
-<p>
-
-    <code>blockTime</code>, <code>loopDelay</code>, and
-<code>idleTime</code> now refer to the total amount of time a command
-block, loop, and initialization phase should take, respectively, not
-the amount of time the simulation should stall after completing each
-phase.  For example, if a block takes 2 seconds to complete, and the
-block time is 4 seconds, the client thread will sleep for 2 seconds
-after finishing instead of the full 4.<p>
-
-<code>rampTime</code> is now solely for the benefit of the client
-machines, to control the rate at which threads are started.  The rate
-at which commands from a given protocol are started is now controlled
-by the <code>startDelay</code> variable, which is
-distribution-valued.  Thus the actual command loop now looks like
-this:
-
-<pre>
-wait for startDelay
-start counting idleTime
-start counting blockTime
-execute start function
-wait for remainder of idleTime
-for (1 ... numLoops)
-       	start counting loopDelay
-       	execute loop function
-       	wait for remainder of loopDelay
-execute	end function
-wait for remainder of blockTime
-</pre>
-
-<li><h4>Automatic Message Generation</h4>
-
-Both MIME and text/plain messages can now be generated automatically.
-To enable automatic message generation, set the <code>file</code>
-attribute of an SMTP block to "auto".  The messages will then have at
-least as many headers as the value of the <code>headers</code>
-attribute, have bodies <code>size</code> bytes long, and have
-<code>mime</code> MIME parts.  To generate text/plain messages, set
-<code>mime</code> to zero.
-
-<table border=1 cellpadding=2>
-<tr><th>Attribute</th><th>Description</th></tr>
-
-<tr>
-  <td><code>headers <i>N</i></code></td>
-  <td>(optional; default=5) Each automatically generated message will
-      have <code>min(<i>N</i>, min_hdrs)</code> headers, where
-      <code>min_hdrs</code> is 5 for text/plain, and about 7 for MIME
-      messages.  Additional headers are named
-      "X-generated-header-%d". </td>
-</tr>
-
-<tr>
-  <td><code>size <i>N</i></code></td>
-  <td>(required) Each generated message will have a body be <i>N</i>
-      bytes long.</td>
-</tr>
-
-<tr>
-  <td><code>mime <i>N</i></code></td>
-  <td>Each generated message will have <code>N</code> MIME parts.  If
-      the value of <code>size</code> does not allow <code>N</code> parts,
-      one part is generated.  If <code>N</code> is zero, the message is
-      text/plain.</td>
-</tr>
-
-<tr>
-  <td><code>checksum <i>{yes|no|save}</i></code></td>
-  <td>For SMTP: each generated message will have the MD5 sum of the
-  message body appended to the message unless the value is <i>no</i>.
-  For retrieval protocols, checksums will be verified.  (NOT
-  IMPLEMENTED: if <code>checksum</code> is <i>save</i>, messages with
-  incorrect checksums will be saved to temporary files for later
-  examination.) </td>
-</tr>
-
-</table>
-
-<li><h4>Linespeed Emulation</h4>
-
-SMTP, POP, and IMAP all support a form of linespeed emulation,
-controlled via the <code>latency</code> and <code>bandwidth</code>
-parameters.
-
-<table border=1 cellpadding=2>
-<tr><th>Attribute</th><th>Description</th></tr>
-
-<tr><td><code>latency <i>N</i></code></td>
-<td>Set the network latency to <code>N</code> milliseconds.</td></tr>
-
-<tr><td><code>bandwidth <i>N</i></code></td>
-
-<td>Transfer at most <code>N</code> bytes per second.</td></tr>
-
-</table>
-
-<li><h4>TLS support</h4>
-
-If you have openssl, mstone now supports STARTTLS for SMTP and IMAP,
-and STLS for POP (both old-style and MULTIPOP), as well as SSL
-tunneling.  This support is <strong>not</strong> well-tested, and TLS
-can be a bit tricky to set up, so use at your own risk.  TLS
-introduces several new attributes to the protocol blocks:
-
-<table border=1 cellpadding=2>
-<tr><th>Attribute</th><th>Description</th></tr>
-
-<tr><td><code>sslcert <i>filename</i></code></td>
-<td>Read the client's cert from <i>filename</i>, which should be in
-PEM format. </td></tr>
-
-<tr><td><code>sslkey <i>filename</i></code></td>
-
-<td>Read the client's private key from <i>filename</i>, which should
-be in PEM format.</td></tr>
-
-<tr><td><code>usetls {0|1}</code></td>
-
-<td>Turn STARTTLS/STLS on or off (default: off).  <b>Note</b>:
-<code>starttls</code> and <code>ssltunnel</code> are mutually
-exlcusive.</td></tr>
-
-<tr><td><code>ssltunnel {0|1}</code></td>
-
-<td>Turn SSL tunneling on or off (default: off).</td></tr>
-
-</table>
-
-<li><h4>"Multi-POP" protocol</h4>
-
-<b>Note</b>: multipop, always a band-aid, is hopefully obsoleted by
-the new event-queue execution model.  Though it has not been tested,
-it should be easier, more efficient, and more accurate to use the
-normal POP protocol with events to simulate a large number of users
-with a reasonable number of threads.  Once this has been tested,
-automatically-generated workloads should revert to using POP.
-
-<p>To simulate a large number of concurrently active POP users with
-Mstone's extravagant use of threads, and to simulate a period of
-activity comprised of several POP sessions one can use the MULTIPOP
-protocol to multiplex active users onto a single thread.  The protocol
-has all the same parameters as POP, plus the following:
-
-<table border=1 cellpadding=2>
-<tr><th>Attribute</th><th>Description</th></tr>
-
-<tr><td><code>userSpacing</code></td>
-
-    <td>Total time for each user's session.</td>
-</tr>
-<tr><td><code>usersPerModem</code></td>
-
-    <td>The maximum number of concurrently connected users is limited
-	to <code>users / usersPerModem</code></td>
-</tr>
-</table>
-
-<p>
-
-The protocol functions are substantially different.  Instead of
-simulating a single login-check-logout sequence, a protocol block
-simulates an entire active period for a set of users.  Each user
-checks mail once in the initialization function, once each time the
-loop body is executed, and once more in the protocol conclusion
-function.  
-<p>
-
-<li><h4>"Event-queue" implementation</h4>
-
-<p>
-Unless the "noevents" parameter in the "&lt;config&gt;" section is set to 1,
-or mailclient is not given the "-e" flag, mstone will run in
-"event-queue" mode.  Instead of creating one thread per client, it
-will multiplex clients over a much smaller number of threads.  This is
-intended to increase the tool's scalability.
-
-<p>
-Note that I/O is still synchronous with this model, so the number of
-threads required will approximately equal the maximum number of
-concurrent operations.  Also note that this change does not reduce the
-number of required file descriptors.
-
-<p>
-
-<li><h4>Other Minor Additions</h4>
-
-<ul>
-
-<li>IMAP now has a ramp-down time, enabled by defining
-<code>IMAP_RAMPDOWN</code>.  IMAP threads now exit uniformly between
-the time the test is supposed to be over and the time Mstone starts
-killing them.
-
-<li>Mstone used to always time out connections after 60 seconds.  The
-timeout value can now be configured on a per-block basis via the
-<code>timeout</code> parameter. The value of the timeout parameter must
-be defined in milliseconds, so the following value would mean a timeout
-of one (1) hour:<BR>
-
-&nbsp;&nbsp;&nbsp;timeout 3600000
-
-<li>Simplified client allocation.  It is now possible to specify the
-number of clients in each group by specifying a value for
-<code>clients</code> in each <code>&lt;CLIENT&gt;</code> section and
-<em>not</em> specifying a global <code>clientCount</code> in the
-<code>&lt;CONFIG&gt;</code> section.
-
-</ul>
-
-<li><h4>Bug Fixes</h4>
-
-<ul>
-
-<li>SMTP now ignores debugging output appearing over the connection.
-Before, Mstone would generate an error when talking to
-e.g. <code>sendmail -d64.5</code>.
-
-<li>(now it works...)  The old sequence of IMAP commands used by
-Mstone was incorrect.  Instead of only downloading unread messages, it
-would download all messages received since the start of the session
-each time a new messages was received.  Depending on what you were
-doing, this could have a serious effect on your results.
-
-</ul>
-
-<li><h4>Wish List</h4>
-
-<ul>
-  <li>Scriptable user behavior for POP and IMAP protocols.  While we should
-      probably not go overboard, adding more configuration options to Mstone
-      is probably not the answer.  There is already some support for more
-      complex behaviors in the IMAP code -- we may or may not want to make
-      use of it.  More to the point, wider coverage of the IMAP
-      protocol is vital to QA's use of the tool.
-</ul>
-
-</ol>
-</body></html>

mozilla/mstone/ToDo

@@ -1,189 +0,0 @@
-Mstone TODO List
-
-Updated:
-	3-20-2000	Dan Christian
-
-======================================================================
-Minor improvements
-
-Data reduction at each testbed client
-
-Test message generator (plain and MIME styles)
-
-More graphs for multiple runs
-
-Option to drop a fraction of connections
-
-IMAP delete without reading
-	Just get the message list and delete everything.  This could
-be the fastest way to drain out the store.
-
-
-Display MIN/MAX or standard deviation on graphs
-	Gnuplot can do data points with error bars.  You could either
-use MIN/MAX or the standard deviation for the error bars.  There are
-issues with calculating the standard deviation numbers throughout the
-graph that need to be addressed.
-
-
-Statistics reset
-	At least the MIN and MAX statistics could be easily reset
-during the test (after ramp up).  This keeps the transients during
-startup and shutdown from dominating these numbers.  The standard
-deviation statistics are much trickier to reset during the run.  It
-may be better to isolate sections in post processing.
-
-
-Perl web server
-	Sometimes it would be nice to include our own web server to
-provide the results (instead of using file: URLs).  This would also be
-a gateway to form based test configuration editing and allow results
-to be interactively updated during tests.  Perl with a socket library
-could handle this without too much trouble.
-
-
-Dynamic test loading
-	Finalize an API for dynamically loading tests.  This would
-allow tests to be added or updated separately from the core
-functionality.  This may be needed for some types of security testing.
-
-
-Link graphs to the results tables
-	There are already tags by each graph.  You should be able to
-link the appropriate results table entry to each graph.  This sort of
-tricky since graphs often combine multiple entries.
-
-
-Show statistics for every block
-	Statistics are actually kept for every block in every thread.
-There should be a way to view information at this detail.
-
-
-Man pages
-	The online docs are nice, but good 'ol man pages would be
-great in a different way.
-
-
-Reduce namespace polution
-	Scripts names like setup and cleanup are too general.  They
-
-should be part of the main 'mstone' script (e.g. mstone setup).
-
-Examples of script series
-	Include example scripts to run entire series of tests in a
-sane way.
-
-
-Fix FORMAT clash
-	At the start of a test, each client process outputs the
-information needed to report all its protocols.  When there are
-multiple processes on one client, these FORMAT lines can intermix and
-cause parsing errors.
-
-
-Set connection drop rate
-	Drop some percentage of the connections without a proper
-shutdown.  This tests how well a server can detect and recover from
-hard disconnects.
-
-
-Improve randomness
-	The way that we generate random numbers in a range may be not
-generate the proper randomness.  We are using lrand48()%range we
-should use (lrand48/RAND_RANGE)*range.  There are some end conditions
-that need to be thought about.  All of this is in the sequence code;
-one change should fix (or break :) everything.
-
-	Also, we may be generating numbers that are never used.  This
-may be costly, and can create holes in the proper sequence.
-
-
-Improve printing
-	The color graphs are great on screen, but tend to print
-poorly.  Either we need a better way to generate a printable version
-(maybe through a CGI button), or the seperate protocols need to be
-printed individually.  Also, Communicator does a lousy job of keeping
-title with tables or graphs.  Hopefully, Mozilla will do better.
-
-
-======================================================================
-Whole new protocol tests:
-
-ICQ
-	Test high volume instant messaging.  Very useful for the
-bridges and gateways that people are considering using.
-
-
-WAP
-	WAP is the emerging standard for mobile phones.
-
-
-WCAP
-	Web based calendar services
-
-
-LDAP
-	Use the LDAP SDK to do basic LDAP testing.  The SDK probably
-isn't fast enough to call this a real performance test, but you can at
-least test performance degredation due to load from a real application
-(like a mail server).
-
-
-DNS
-	Mail servers use DNS a lot.  You should at least be able to
-see if performance is degrading due to load.
-
-
-Disk/filesystem
-	Test read, write, sync, link, un-link, and append performance under
-multiple threads.
-
-
-Cert servers
-	Test certificate authenticity checking performance
-
-
-======================================================================
-Possible dummy servers:
-
-SMTP
-	Receive mail via SMTP and ignore it.  Usefull for SMTP relay
-testing.
-
-
-DNS
-	Simulate slow DNS server lookups.  Usefull for SMTP relay testing.
-
-
-======================================================================
-Major changes
-
-Throttling
-	Monitor and control transaction rates so that specific load
-levels can be easily specified.  The rates should be able to vary to
-simulate peek hour usage and disconnect-restore.
-
-
-NSPR threading
-	Use NSPR for threading and sockets.  This may allow other OSes
-to be used as clients.  This might be easy, since mstone does not need
-any locking, just simple thread creation and harvesting.  NSPR
-argument parsing and hashes may also be useful.
-
-
-SSL
-	Support SSL on the protocols that allow it.  May require NSPR.
-
-
-Line speed emulation
-	Simulate the variable delays and limited throughput of dial up
-connections.
-
-
-Scripting
-	Allow more detailed control of protocol tests.  It looks
-difficult to make this scalable and fast.
-
-
-Combined tests
-	Deliver mail over SMTP and then see when it arrives using IMAP.

mozilla/mstone/allbuild

@@ -1,462 +0,0 @@
-#!/bin/ksh
-########################################################################
-# buildall - automated multi-platform build tool
-#
-# 10/09/97 - marcel - created
-# 10/13/97 - marcel - support shared build tree
-#  2/11/98 - marcel - updated for 4.0 Beta builds (need -update)
-#  2/26/98 - marcel - added -r, -t and host specifiers
-#  7/01/99 - robodan - added VAR=value ability
-#  8/01/99 - robodan - explicitly know about building on localhost
-#  10/15/99 - robodan - remove older OSes from build list
-#  2000/4/7 - robodan - Created mstone version
-########################################################################
-#
-# This script is intended to do a set of UNIX builds for a
-# given CVS module.  It is designed to use 'rsh' between a
-# set of trusting hosts and use shared NFS storage with common
-# mount points (e.g. /u/username/...)
-#
-# To check if you have rights to rsh to a particular host, try:
-#   rsh hostname "echo $PATH"
-# You may have to edit your .rhosts or /etc/hosts.equiv
-#
-# A target directory will be created based on the current date.
-#
-# A set of global build logs plus a log per platform are kept
-# in a log directory under the target
-#
-# It will checkout a copy of the source, duplicate it for
-# each platform and perform a set of remote builds in parallel.
-# The script will exit when all the work has been completed.
-#
-# Example usage:
-#  cd ~/src; buildall msg
-# Result:
-#  ~/src/19980210_40.1/
-#  ~/src/19980210_40.1/logs/...
-#  ~/src/19980210_40.1/src/...
-#  ...
-#
-
-# Buildhosts
-DEFAULT_BUILDHOSTS="kimo nugget vsync shave purgatory trex0"
-
-usage() {
-  echo ""
-  echo "usage: buildall [ make assigns... ] < -t | target > [ -r ] [ buildhosts... ]"
-  echo "   [ -t | --test]:	just test rsh and report OS versions."
-  echo "  [-r | --respin]:	rebuild in place using existing source."
-  echo "  [-p | --postbuild]:	Execute post build command too."
-  echo "  [make assigns]:	e.g. VARIANT=release"
-  echo "         <target>:	one of: mstone42"
-  echo "  [buildhosts...]:	default [$DEFAULT_BUILDHOSTS]"
-  echo ""
-  exit 1
-}
-
-########################################################################
-# Set these defaults and options for your desired build
-########################################################################
-
-# Target base destination directory
-DESTBASE=`pwd`
-
-# Can we do multiple ARCH builds in same source tree
-SHARESRC=yes
-
-DESCRIPTION=""
-BUILDHOSTS=""
-RESPIN="no"
-POSTBUILD="no"
-JUST_TEST="no"
-DESTTYPE=""
-CO_CMD="cvs -d $CVSROOT -q checkout"
-CHECKOUT=""
-CHECKOUT2=""
-#MOZCVSROOT=':pserver:anonymous@cvs.mozilla.org:/cvsroot'
-MOZCVSROOT=':pserver:robodan%netscape.com@cvs.mozilla.org:/cvsroot'
-
-MAKE="gmake"
-MK_ARG=""
-
-ARGS="$@"
-
-for ARG in "$@"; do
-
-# If this is a make assignment (FOO=whatever), add it to make command
-# Arguments with quotes in them dont go all the way through.
-# Make args trick: 'FOO=nop -j 2'
-# The pre-post arg stuff uses hostnames as a switch, ugly calling syntax.
-if [[ -n "`echo z$ARG | egrep '^z[A-Z0-9_]+=[^ 	]'`" ]] ; then
-  if [[ -n "$DESCRIPTION" ]] ; then
-	echo "Arg after target is ignored! ($ARG)"
-	continue
-  fi
-  if [[ -z "$BUILDHOSTS" ]] ; then	# pre  args
-    MAKE="$MAKE $ARG"
-  else					# post args
-    MK_ARG="$MK_ARG $ARG"
-  fi
-  continue
-fi
-
-# should we just rebuild todays latest source...
-if [[ "$ARG" = "-r" || "$ARG" = "--respin" || "$ARG" = "respin" ]]; then
-  RESPIN="yes"
-  continue
-fi
-
-# should we just run post build command...
-if [[ "$ARG" = "-p" || "$ARG" = "--postbuild" || "$ARG" = "postbuild" ]]; then
-  POSTBUILD="yes"
-  continue
-fi
-
-# should we just test remote connectivity and execute permissions...
-if [[ "$ARG" = "-t" || "$ARG" = "--test" ]]; then
-  JUST_TEST="yes"
-  RESPIN="yes"
-  continue
-fi
-
-# We will pull source using: "$CHECKOUT"
-# And build on each machine: "cd $BUILDDIR && $BUILDCMD"
-
-
-# expand targets (but dont confuse hosts for targets (msg7))
-
-# These will build just mstone
-# expand targets (but dont confuse hosts for targets (msg7))
-if [[ "$BUILDCMD" = "" && "$ARG" = mailstone* ]]; then
-  case ${ARG#mstone} in
-	"")
-	"42")
-		DESTTYPE=_MSTONE42
-		MS_BRANCH=""
-		#BUILDCMD="$MAKE $MK_ARG debug release"
-		#POSTCMD="$MAKE $MK_ARG all_DBG.OBJ all_OPT.OBJ"
-		BUILDCMD="$MAKE $MK_ARG rpackage"
-		POSTCMD="$MAKE $MK_ARG all_OPT"
-		;;
-	*)
-		echo "Unknown mstone version in $ARG"
-		echo "Try mstone42"
-		exit 1;;
-  esac
-
-  DESCRIPTION="Mstone $MS_BRANCH"
-  BUILDDIR=./mozilla/mstone
-  CVSROOT=$MOZCVSROOT
-  CHECKOUT="$CO_CMD $MS_BRANCH mozilla/mstone"
-  # BUG No way to unpack perl, gd, and gnuplot before building
-  continue
-fi
-
-#########################
-# Other...
-#########################
-
-# These will print some tools info
-if [[ "$ARG" = "tools" ]]; then
-  CHECKOUT="$CO_CMD modules"
-  BUILDDIR=.
-  BUILDCMD="which gcc && ls -l /tools/ns/bin/gcc && which gcc-2.7.2.1 && ls -l /tools/ns/bin/gcc-2.7.2.1"
-  continue
-fi
-
-#########################
-# Everything else is assumed to be a hostname
-#########################
-
-BUILDHOSTS="$ARG $BUILDHOSTS"
-
-done # for ARG in $*; do
-
-if [[ "$BUILDHOSTS" = "" ]]; then
-  BUILDHOSTS=$DEFAULT_BUILDHOSTS
-fi
-
-if [[ "$BUILDCMD" = "" && "$JUST_TEST" = "no" ]]; then
-  usage
-fi
-
-########################################################################
-# You shouldn't have to modify stuff below here too much
-########################################################################
-
-# Who and Where are we
-PROG=buildall
-RSH=rsh
-SYS=`uname -s`
-echo SYS=$SYS
-if [[ "$SYS" = "HP-UX" ]]; then
-  RSH=remsh
-fi
-
-########################################################################
-# Simple log output function
-########################################################################
-
-log() {
-#  echo "[`date +\"%Y/%m/%d %H:%M:%S\"`] $PROG: $*"
-  echo "`date +\"%H:%M:%S\"` $PROG: $*"
-}
-
-########################################################################
-# Error
-########################################################################
-
-quit() {
-  log "$* (exiting)..."
-  exit 1
-}
-
-# Where should the work be done
-REV=1
-WORKDIR=$DESTBASE/`date +"%Y%m%d"`$DESTTYPE.$REV
-LASTWORKDIR=$WORKDIR
-LASTREV=$REV
-
-while [[ -d $WORKDIR ]]; do
-  LASTREV=$REV
-  let "REV= REV + 1"
-  LASTWORKDIR=$WORKDIR
-  WORKDIR=$DESTBASE/`date +"%Y%m%d"`$DESTTYPE.$REV
-done
-
-if [[ "$RESPIN" = "yes" ]]; then
-  WORKDIR=$LASTWORKDIR
-  REV=$LASTREV
-fi
-BUILDREV=$REV
-
-if [[ ! -d $WORKDIR && "$RESPIN" = "yes" ]]; then
-  quit "missing expected respin workdir ($WORKDIR)"
-fi
-
-mkdir -p $WORKDIR
-
-# Where to send logs
-LOGDIR=$WORKDIR/logs
-[[ -d $LOGDIR ]] || mkdir $LOGDIR
-
-# What tool to use for compressed tar
-if [[ -x /tools/ns/bin/tar ]] ; then	# ROBDAN 9-15-98 for Linux
-  TAR=/tools/ns/bin/tar
-else
-  TAR=tar
-fi
-
-SRCDIR=$WORKDIR/src
-SRCTAR=$WORKDIR/src.tar.gz
-
-########################################################################
-# The function which extracts the source and prepares for copies
-########################################################################
-
-prepare_source() {
-  log "Preparing source code..."
-  mkdir $SRCDIR
-  (cd $SRCDIR;
-   log "Extracting source in $SRCDIR...";
-   log "$CHECKOUT > $LOGDIR/cvs-co.txt";
-   $CHECKOUT > $LOGDIR/cvs-co.txt;
-   RET=$?
-   if [[ $RET -ne 0 ]]; then quit "### Failed($RET): $CHECKOUT"; fi
-   if [[ "$CHECKOUT2" != "" ]]; then
-      log "$CHECKOUT2 >> $LOGDIR/cvs-co.txt";
-      $CHECKOUT2 >> $LOGDIR/cvs-co.txt;
-      RET=$?
-      if [[ $RET -ne 0 ]]; then quit "### Failed($RET): $CHECKOUT2"; fi
-   fi
-   log "Listing source...";
-   ls -Rl > $LOGDIR/src-ls-Rl.txt
-   log "Archiving source..."
-   $TAR czf $SRCTAR .
-  )
-  RET=$?
-  if [[ $RET -ne 0 ]]; then
-    quit "### Failed($RET): cannot prepare source";
-  else
-    log "Source extraction complete";
-  fi
-}
-
-########################################################################
-# The function which does a build
-########################################################################
-
-do_rbuild() {
-  OSDEST=$1
-
-  if [ "$SHARESRC" = "yes" ]; then
-    RSRCDIR=$SRCDIR
-  else
-    RSRCDIR=$WORKDIR/$OSDEST
-  fi
-
-  [[ -d $RSRCDIR ]] || mkdir -p $RSRCDIR
-
-  cd $RSRCDIR;
-
-  # do any late variable expansions
-  RAWCMD=$BUILDCMD
-  BUILDCMD=$(eval echo $RAWCMD)
-  
-  if [[ $RHOST = localhost ]] ; then
-    log "Build locally for $OSDEST ($BUILDCMD)...";
-    cd $BUILDDIR && pwd && $BUILDCMD && echo $PROG: Success
-    RET=$?
-    if [[ $RET -ne 0 ]]; then quit "### Failed($RET): $OSDEST build"; fi
-
-    log "Completed local build..."
-    return
-  fi
-
-  if [[ "$SHARESRC" != "yes" ]]; then
-     log "Extracting source for $OSDEST...";
-     $RSH $RHOST -n "cd $RSRCDIR && pwd && $TAR xzf $SRCTAR";
-     RET=$?
-     if [[ $RET -ne 0 ]]; then quit "### Failed($RET): $OSDEST source extraction"; fi
-  else
-     log "Using common source in $RSRCDIR";
-  fi
-  
-  log "Building for $OSDEST ($BUILDCMD)...";
-  $RSH $RHOST -n "cd $RSRCDIR/$BUILDDIR && pwd && $BUILDCMD && echo $PROG: Success"
-  RET=$?
-  if [[ $RET -ne 0 ]]; then quit "### Failed($RET): $OSDEST build"; fi
-
-  log "Completed $OSDEST...";
-}
-
-buildhost() {
-  RHOST=$1
-
-  log "Query $RHOST configuration...";
-
-  if [[ $RHOST = localhost ]] ; then
-     uname -s > /tmp/$$.$RHOST 2>&1
-  else
-    $RSH $RHOST -n "uname -s" > /tmp/$$.$RHOST 2>&1
-    RET=$?
-    if [[ $RET -ne 0 ]]; then
-      quit "..[$RHOST] ### Failed($RET): $RSH $RHOST -n \"uname -s\"";
-    fi
-  fi
-  ROSTYPE=`tail -1 /tmp/$$.$RHOST`
-
-  if [[ "$ROSTYPE" = "AIX" ]]; then
-    $RSH $RHOST -n "uname -v" > /tmp/$$.$RHOST 2>&1
-    ROSTYPE=${ROSTYPE}`tail -1 /tmp/$$.$RHOST`
-  fi
-
-  if [[ $RHOST = localhost ]] ; then
-     uname -r > /tmp/$$.$RHOST 2>&1
-  else
-    $RSH $RHOST -n "uname -r" > /tmp/$$.$RHOST 2>&1
-  fi
-  ROSREV=`tail -1 /tmp/$$.$RHOST`
-  rm /tmp/$$.$RHOST
-
-  if [[ $RHOST = localhost ]] ; then
-    OSDEST=`hostname | cut -f1 -d.`-${ROSTYPE}${ROSREV}
-  else
-    OSDEST=${RHOST}-${ROSTYPE}${ROSREV}
-  fi
-  log "..Building on [$OSDEST]..."
-
-  REV=1				# find unique logfile name
-  OSLOG=$LOGDIR/$OSDEST.$REV
-  while [[ -f $OSLOG ]]; do
-    let "REV = REV + 1"
-    OSLOG=$LOGDIR/$OSDEST.$REV
-  done
-
-  if [[ "$JUST_TEST" = "yes" ]]; then
-    echo "$PROG: Success" > $OSLOG
-  else
-    ( do_rbuild $OSDEST ) > $OSLOG 2>&1
-  fi
-
-  grep "$PROG: Success" $OSLOG > /dev/null
-  RET=$?
-  if [[ $RET -eq 0 ]]; then
-    RESULT="SUCCESS";
-  else
-    RESULT="FAILURE($RET)";
-  fi
-  log "..Completed [$OSDEST] <$RESULT>.";
-}
-
-########################################################################
-# The function which initiates all the builds
-########################################################################
-
-do_builds() {
-  log "Launching builds..."
-
-  for HOST in $BUILDHOSTS; do
-    buildhost $HOST &
-  done
-}
-
-########################################################################
-# main
-########################################################################
-
-main() {
-  if [[ "$JUST_TEST" = "yes" ]]; then
-    log "Automated test starting..."
-  else
-    log "Automated build of [$DESCRIPTION] starting..."
-  fi
-  log ""
-  log "       ARGS = $ARGS"
-  log " BUILDHOSTS = $BUILDHOSTS"
-  log "    WORKDIR = $WORKDIR"
-  log "     SRCDIR = $SRCDIR"
-  log "     LOGDIR = $LOGDIR"
-  log "   CHECKOUT = $CHECKOUT"
-  log "   BUILDDIR = $BUILDDIR"
-  log "   BUILDCMD = $BUILDCMD"
-  log "     RESPIN = $RESPIN"
-  log ""
-
-  [[ "$RESPIN" = "no" ]] && prepare_source
-  do_builds
-  log "Waiting for all builds to complete..."
-  wait
-  log "All builds completed."
-
-  if [[ -n "$POSTCMD" && "$POSTBUILD" = "yes" ]] ; then
-	log "Running post build command."
-
-	REV=1				# find unique logfile name
-	POSTLOG=$LOGDIR/postbuild.$REV
-  	while [[ -f $POSTLOG ]]; do
- 	  let "REV = REV + 1"
- 	  POSTLOG=$LOGDIR/postbuild.$REV
-	done
-
-	echo "Dir $SRCDIR/$BUILDDIR" > $POSTLOG
-	echo "Cmd $POSTCMD" >> $POSTLOG
-	(cd $SRCDIR/$BUILDDIR && $POSTCMD && echo $PROG: Success) >> $POSTLOG 2>&1
-
-        log "Post build command completed."
-  elif [[ -n "$POSTCMD" ]] ; then
-	echo "Skipping post build command: $POSTCMD"
-  fi
-}
-
-REV=1
-PROGLOG=$LOGDIR/$PROG.$REV
-
-while [[ -f $PROGLOG ]]; do
-  REV=`expr $REV + 1`
-  PROGLOG=$LOGDIR/$PROG.$REV
-done
-
-main | tee $PROGLOG 2>&1
-exit 0

mozilla/mstone/autobuild.bat

@@ -1,164 +0,0 @@
-@if not "%echo%" == "on" echo off
-
-REM ************ simple autobuild for mailstone
-
-setlocal
-
-set BOTH=0
-
-if not "%1" == "" goto GetTag
-
-set BOTH=1
-set TAG=_OPT
-goto SetConfig
-
-:GetTag
-
-if %1 == dbg set TAG=_DBG
-if %1 == DBG set TAG=_DBG
-if %1 == Debug set TAG=_DBG
-if %1 == debug set TAG=_DBG
-if %1 == Release set TAG=_OPT
-if %1 == release set TAG=_OPT
-if %1 == opt set TAG=_OPT
-if %1 == OPT set TAG=_OPT
-if %1 == optimize set TAG=_OPT
-if %1 == Optimize set TAG=_OPT
-if %1 == optimized set TAG=_OPT
-if %1 == Optimized set TAG=_OPT
-if %1 == clean goto CleanBoth
-
-:SetConfig
-
-if %TAG% == _DBG set Config=Debug
-if %TAG% == _OPT set Config=Release
-
-set ARCH=WINNT4.0%TAG%.OBJ
-
-set FINAL_PATH=built\package\%ARCH%\mailstone
-
-if not "%2" == "clean" if not exist %FINAL_PATH%\nul mkdir %FINAL_PATH%
-
-
-REM ************ first, clean the binary release
-nmake /f mailstone.mak CFG="mailstone - Win32 %Config%" /nologo NO_EXTERNAL_DEPS=1 CLEAN
-
-if not "%2" == "clean" goto BuildMailstone
-
-if exist src\%Config%\nul echo y | rd /s src\%Config% > nul
-if exist src\gnuplot-3.7\%Config%\nul echo y | rd /s src\gnuplot-3.7\%Config% > nul
-if exist src\gd1.3\%Config%\nul echo y | rd /s src\gd1.3\%Config% > nul
-if exist built\%ARCH%\nul echo y | rd /s built\%ARCH% > nul
-if exist %FINAL_PATH%\nul echo y | rd /s %FINAL_PATH% > nul
-
-goto done
-
-:BuildMailstone
-
-REM **************** next, build it
-nmake /f mailstone.mak CFG="mailstone - Win32 %Config%" /nologo NO_EXTERNAL_DEPS=1
-if errorlevel 1 goto BadBuild
-
-REM ************ next, copy the top-level files
-copy mstone.bat %FINAL_PATH%
-copy setup.bat %FINAL_PATH%
-copy CHANGELOG %FINAL_PATH%
-copy INSTALL %FINAL_PATH%
-copy README %FINAL_PATH%
-copy LICENSE %FINAL_PATH%
-
-REM ************ now, copy the files for running mailstone into bin
-if not exist %FINAL_PATH%\bin\nul mkdir %FINAL_PATH%\bin
-copy built\%ARCH%\mailclient.exe %FINAL_PATH%\bin
-if exist built\package\%ARCH%\mailclient.exe copy built\package\%ARCH%\mailclient.exe %FINAL_PATH%\bin
-if exist built\package\%ARCH%\mailclient.exe del /f /q built\package\%ARCH%\mailclient.exe
-copy bin\*.pl %FINAL_PATH%\bin
-
-REM ************ now, copy the configuration files into conf
-if not exist %FINAL_PATH%\conf\nul mkdir %FINAL_PATH%\conf
-copy conf\*.* %FINAL_PATH%\conf
-
-REM ************ now, copy the data files into data
-if not exist %FINAL_PATH%\data\nul mkdir %FINAL_PATH%\data
-copy data\*.msg %FINAL_PATH%\data
-
-REM ************ now, copy the gd files into gd
-if not exist %FINAL_PATH%\gd\nul mkdir %FINAL_PATH%\gd
-copy src\gd1.3\index.html %FINAL_PATH%\gd\gd.html
-
-REM ************ now, copy the gnuplot files into gnuplot
-if not exist %FINAL_PATH%\gnuplot\nul mkdir %FINAL_PATH%\gnuplot
-copy built\%ARCH%\gnuplot\gnuplot.exe %FINAL_PATH%\gnuplot
-copy src\gnuplot-3.7\Copyright %FINAL_PATH%\gnuplot
-copy src\gnuplot-3.7\docs\gnuplot.1 %FINAL_PATH%\gnuplot
-
-REM ************ now, copy the perl files into perl
-if not exist %FINAL_PATH%\perl\nul mkdir %FINAL_PATH%\perl
-if not exist %FINAL_PATH%\perl\bin\nul mkdir %FINAL_PATH%\perl\bin
-if not exist %FINAL_PATH%\perl\lib\nul mkdir %FINAL_PATH%\perl\lib
-if not exist %FINAL_PATH%\perl\lib\5.00503\nul mkdir %FINAL_PATH%\perl\lib\5.00503
-if not exist %FINAL_PATH%\perl\lib\5.00503\MSWin32-x86\nul mkdir %FINAL_PATH%\perl\lib\5.00503\MSWin32-x86
-#copy built\%ARCH%\perl\perl.exe %FINAL_PATH%\perl\bin
-#rcp -b sandpit:/share/builds/components/perl5/WINNT-perl5/perl.exe %FINAL_PATH%\perl\bin\perl.exe
-#if errorlevel 1 goto BadRcp
-#if not exist %FINAL_PATH%\perl\perl.exe goto BadRcp
-#rcp -b sandpit:/share/builds/components/perl5/WINNT-perl5/perl300.dll %FINAL_PATH%\perl\bin\perl300.dll
-#if errorlevel 1 goto BadRcp
-#if not exist %FINAL_PATH%\perl\perl300.dll goto BadRcp
-
-copy src\perl5.005_03\Artistic %FINAL_PATH%\perl
-copy c:\perl\5.00503\bin\MSWin32-x86\perl.exe %FINAL_PATH%\perl\bin
-copy c:\perl\5.00503\bin\MSWin32-x86\perl.dll %FINAL_PATH%\perl\bin
-copy c:\perl\5.00503\lib\*.pm %FINAL_PATH%\perl\lib\5.00503
-copy c:\perl\5.00503\lib\*.pl %FINAL_PATH%\perl\lib\5.00503
-copy c:\perl\5.00503\lib\MSWin32-x86\*.pm %FINAL_PATH%\perl\lib\5.00503\MSWin32-x86
-
-
-goto end
-
-:CleanBoth
-
-echo.
-echo NOTICE: CLEANING debug build
-call autobuild.bat debug clean
-
-echo NOTICE: CLEANING optimized build
-call autobuild.bat release clean
-
-echo NOTICE: Removing generated dependency files
-del /s *.dep
-
-if exist built\nul echo y | rd /s built > nul
-
-goto done
-
-:BadRcp
-
-echo.
-echo ERROR: Failed to rcp perl files over to mailstone packaging
-echo ERROR: Two common causes of this are .rhosts permissions or a broken rcp.exe
-echo ERROR: Make sure you are not using rcp.exe from NT4.0 SP4
-echo ERROR: The SP5 version is available in \\cobra\engineering\bin\rcp_sp5.exe
-echo ERROR: Use this version to replace ...\system32\rcp.exe
-goto done
-
-:BadBuild
-
-echo.
-echo ERROR: Failed to build mailstone
-goto done
-
-:end
-
-echo.
-
-if %BOTH% == 0 goto done
-if %TAG% == _DBG goto done
-
-set TAG=_DBG
-goto SetConfig
-
-:done
-
-endlocal
-

mozilla/mstone/bin/args.pl

@@ -1,64 +0,0 @@
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# This file does argument processing, file IO, and other utility routines
-
-# Where the online docs live
-#$mailstoneURL =
-#    "http://home.netscape.com/eng/server/messaging/4.1/mailston/stone.htm";
-#$mailstoneURL =
-#    "http://lxr.mozilla.org/mozilla/source/mstone/doc/MailStone.html";
-#$mailstoneURL =
-#    "http://docs.iplanet.com/docs/manuals/messaging/nms415/mailstone/stone.htm"
-$mailstoneURL = "doc/MailStone.html";
-
-# Subdirs for results (each under a timestamp dir).  Should just hardwire.
-$tmpbase = "tmp";
-$resultbase = "results";
-
-# This holds everything about the test and system configuration
-@workload = ();
-# Setup the special CONFIG section
-$params{"sectionTitle"} = "CONFIG";
-$params{"sectionParams"} = "";
-$params{"lineList"} = ();
-push @workload, \%params;
-
-# Get the lists discribing the data we process
-do 'protoconf.pl' || die "$@\n";
-
-%includedFiles = ();		# array of included files
-
-do 'util.pl' || die "$@\n";
-
-return 1;

mozilla/mstone/bin/genplot.pl

@@ -1,310 +0,0 @@
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-#			Sean O'Rourke <sean@sendmail.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# This file deals with the graphs data only
-# Interfaces to gnuplot to generate gifs for HTML inclusion.
-
-do 'util.pl';
-sub warn_system;
-sub die_system;
-
-# Type of images to hold plots (e.g. png, gif, jpeg, svg, tiff, pbm, etc)
-unless ($params{IMAGETYPE}) {
-    # Should probe gnuplot and see if it can generate one of:
-    #	png, gif, jpeg, svg, tiff, or pbm.
-    # Not all the programs that use args.pl need this (or have gnuplot, yet)
-    my $outfile = "$tmpbase/termtypes.out";
-    my %types = ();		# hash of interesting types that we spot
-
-    unless (open(NEW, "<$outfile")) { # re-use old file if present
-	($params{DEBUG}) &&
-	    print "Asking gnuplot what output types it supports\n";
-
-	# SEAN: this appears to do what they want:
-	warn_system "echo 'set term' | $params{GNUPLOT} > $outfile";
-
-	open(NEW, "<$outfile") ||
-	    warn ": Could not open gnuplot output for parsing ($outfile): $!";
-    }
-
-    # now check through the output for terminal types we can use.
-    # I havent verified the jpeg or tiff types.  e-mail me success or failure
-    while (<NEW>) {
-	(/\spng\s/) && ++$types{"png"} && next;
-	(/\sgif\s/) && ++$types{"gif"} && next;
-	(/\sjpeg\s/) && ++$types{"jpeg"} && next;
-	(/\ssvg\s/) && ++$types{"svg"} && next;
-	(/\stiff\s/) && ++$types{"tiff"} && next;
-	(/\spbm\s/) && ++$types{"pbm"} && next;
-    }
-    close (NEW);
-
-    ($params{DEBUG}) &&
-	print "Found these gnuplot types: " . (join " ", (keys %types)) . "\n";
-
-    # The ordering here determines our preferences
-    # This list is by likely browser compatibility and image compactness
-    # png is about 10x smaller than gif
-    # svg is smooth and scalable but usually requires a plug-in
-    # jpeg will probably look bad, but will be directly supported
-    if ($types{"png"}) { $params{IMAGETYPE}="png"; }
-    elsif ($types{"gif"}) { $params{IMAGETYPE}="gif"; }
-    elsif ($types{"jpeg"}) { $params{IMAGETYPE}="jpeg"; }
-    elsif ($types{"svg"}) { $params{IMAGETYPE}="svg"; }
-    elsif ($types{"tiff"}) { $params{IMAGETYPE}="tiff"; }
-    elsif ($types{"pbm"}) { $params{IMAGETYPE}="pbm"; }
-    else {
-	warn "Gnuplot doesn't support any good image types.  Check $outfile.\n";
-	$params{IMAGETYPE} = undef;
-    }
-    # leave the output file around to speed up repeat runs
-}
-
-# sub function to write data files, fire off gnuscript, and clean up
-# Uses global startTime and endTime figured above
-# genPlot counterName title label \@protocols \@variables
-sub genPlot {
-    my $name = shift;
-    my $title = shift;
-    my $label = shift;
-    my $protos = shift || die "genPlot: '$name' missing protocols";
-    my $f = shift;
-    my $vars = shift || die "genPlot: '$name' missing vars";
-
-    my $runlist = "";
-    my $totPoints = 0;
-    my $totProtos = 0;
-    my @realProtos;
-    my @goodProtos;
-
-    # user fewer data points than pixels to look good.
-    #   on 640x480 gif, the graph is about 579x408
-    my $maxData = int (($params{CHARTWIDTH}-60) * 0.9);
-    my $averageCnt = int (($endTime - $startTime + ($maxData - 1))/$maxData);
-    if ($averageCnt < 1) { $averageCnt = 1; } # must be a positive int
-
-    ($params{DEBUG}) && print "$name: averageCnt=$averageCnt vars = @$vars \n";
-
-    foreach $p (@$protos) { # First see if there is anything to graph
-	($p =~ /^Total$/o) && next; # derived if needed
-	my $pPoints = 0;
-	my $gp = $graphs{$p};
-	ALLVAR: foreach $vm (@$vars) {
-	    my $vp =  ($f) ? $gp->{$vm}->{$f} : $gp->{$vm};
-
-	    unless (($vp) && (scalar %$vp)) {
-		#print "genplot Checking: $p $vm $f => NO\n";
-		next;
-	    }
-	    #print "genplot Checking: $p $vm $f => ";
-	    foreach $time (keys %$vp) {
-		next unless ($vp->{$time} != 0);
-		$totPoints++;
-		$pPoints++;
-		#print "VALUES\n";
-		last ALLVAR;
-	    }
-	    #print "nothing\n"
-	}
-	if ($pPoints > 0) {	# count how many protocols have non 0
-	    $totProtos++;
-	    push @goodProtos, $p;
-	}
-    }
-    ($params{DEBUG}) && print "\tprotocols: @goodProtos\n";
-
-    if ($totPoints == 0) {	# nothing in any protocol
-	print "No data for graph '$name', variables '@$vars'\n";
-	return 0;
-    }
-
-    foreach $p (@$protos) {
-	unlink ("$tmpdir/$name.$p"); # remove any previous runs
-
-	(($p =~ /^Total$/o) && ($totProtos <= 1))
-	    && next;		# skip Totally if only 1 protocol plus total
-
-	($p !~ /^Total$/o) && push @realProtos, $p; # everything but Total
-
-#  	if ($p =~ /^Total$/o) {	# move from last to first
-#  	    $runlist = "\'$name.$p\' with lines, " . $runlist;
-#  	    next;
-#  	}
-
-	$runlist .= ", " if ($runlist); # later ones
-
-	$runlist .= "\'$name.$p\' with lines";
-    }
-
-    $totPoints = 0;
-    foreach $p (@realProtos) {	# create the plot data files
-	open(DATA, ">$tmpdir/$name.$p") || 
-	    die "Can't open $tmpdir/$name.$p:$!";
-	my $gp = $graphs{$p};
-	my $n = 0;
-	my $s = 0.0;
-	my $sTime = 0.0;
-	my $vp = ($f) ? $gp->{$vars->[0]}->{$f} : $gp->{$vars->[0]};
-
-#	foreach $time (sort numeric keys %$vp) {
-	for (my $tm = $startTime; $tm <= $endTime; $tm++) {
-	    my $v = 0.0;
-	    foreach $vm (@$vars) {
-		$vp = ($f) ? $gp->{$vm}->{$f} : $gp->{$vm};
-
-		$totPoints++;
-
-		# due to optimization in updateDelta, 
-		#    0 entries are undefined (also avoids warning)
-		$v += ($vp->{$tm}) ? $vp->{$tm} : 0;
-
-		# if ($vp->{$tm} < 0) {
-		# print $name, ": proto=", $p, " var=", $vm,
-		# " value=", $vp->{$tm}, "\n";
-		# }
-	    }
-	    $s += $v;
-	    $n += 1;
-	    if ($n == 1) {	# NOTE: shifts left in sliding window
-		$sTime = $tm-$startTime;
-	    }
-	    if ($n >= $averageCnt) {
-		printf (DATA "%d %f\n", $sTime * $timeStep, $s/$n);
-		$n = 0;
-		$s = 0.0;
-	    }
-	}
-	if ($n > 0) {		# handle end case
-	    printf (DATA "%d %f\n", $sTime * $timeStep, $s/$n);
-	}
-	close(DATA);
-    }
-    #($params{DEBUG}) && print "\tpoints: $totPoints\n";
-
-    # need to handle "Total" case
-    # read the other files and write out the sum
-    # FIX: total my be mis-aligned with data
-    if (($#$protos > $#realProtos) && ($totProtos > 1)) { 
-	unlink ("$tmpdir/$name.Total");
-	open(DATA, ">$tmpdir/$name.Total") || 
-	    die "Can't open $tmpdir/$name.Total:$!";
-
-	foreach $r (@goodProtos) { # get file handles
-	    open($r, "$tmpdir/$name.$r")
-		|| die "Couldn't open $tmpdir/$name.$r: $!";
-	}
-				# ASSUMES files are identical in order
-	my $first = shift @goodProtos;
-	# print "First protocol: $first  Rest: @realProtos\n";
-	while (<$first>) {
-	    my ($t, $s) = split ' ', $_;
-	    foreach $r (@goodProtos) { # get file handles
-		$l = <$r>;
-		if ($l) {
-		    my ($tt, $v) = split ' ', $l;
-		    $t = $tt unless ($t); # in case first proto missing time
-		    $s += $v;
-		}
-	    }
-	    printf (DATA "%d %f\n", $t, $s);
-	}
-
-	foreach $r (@goodProtos) { close($r); }
-	close (DATA);
-    }
-
-    # SEAN: don't even try if we aren't generating images:
-    return 0 unless $params{IMAGETYPE};
-
-    # Create a script to feed to gnuplot, which creates a .gif graph.
-    $runTime = ($endTime - $startTime + 1) * $timeStep;
-    unlink("$tmpdir/$name.gpt");
-    open(SCRIPT, ">$tmpdir/$name.gpt")
-	|| die "Can't open $tmpdir/$name.gpt:$!";
-    
-    $gnuplot = $params{GNUPLOT};
-    return 1 unless $gnuplot;
-    if ($gnuplot !~ /^\//) {	# if not absolute, adjust for cd $tmpbase
-	$gnuplot = "../../$gnuplot"; # ASSUME $tmpbase is single dir
-    }
-    #print "gnuplot is $gnuplot $params{GNUPLOT}\n";
-
-    my $varstring = "";		# create display version of names
-    foreach $t (@$vars) {
-	$varstring .= ", " if ($varstring);
-	$varstring .= ($timerNames{$t}) ? $timerNames{$t} : $t;
-    }
-
-    # Setup output "terminal type"
-    if ($params{IMAGETYPE} eq "gif") { # gif type has different arguments
-	print SCRIPT "set terminal $params{IMAGETYPE} small size $params{CHARTWIDTH},$params{CHARTHEIGHT}\n";
-    } elsif ($params{IMAGETYPE} eq "svg") { # svg type has different args too
-	print SCRIPT "set terminal $params{IMAGETYPE} size $params{CHARTWIDTH} $params{CHARTHEIGHT}\n";
-    } else {			# most types work like this
-	print SCRIPT "set terminal $params{IMAGETYPE} small color\n";
-	if (($params{CHARTWIDTH} != 640) || ($params{CHARTHEIGHT} != 480)) {
-	    my $xscale = $params{CHARTWIDTH} / 640;
-	    my $yscale = $params{CHARTHEIGHT} / 480;
-	    print SCRIPT "set size $xscale,$yscale\n";
-	}
-    }
-    print SCRIPT<<"!GROK!THIS!";
-set output "../../$resultdir/$name.$params{IMAGETYPE}" # ASSUME $tmpbase is single dir
-set autoscale
-set xlabel "Test time (seconds)"
-set ylabel "$label"
-set title "$title ($varstring) -- $params{TSTAMP}"
-plot [0:$runTime] $runlist
-!GROK!THIS!
-    close(SCRIPT);
-
-    # run script from tmpbase to clean up line labeling
-#    my $olddir=getcwd();
-    chdir $tmpdir;
-    warn_system (split (/\s/, $gnuplot), "$name.gpt");
-    chdir "../..";
-#    chdir $olddir;
-
-    unless ($params{DEBUG}) {
-	# cleanup the plot data (or leave around for debugging)
-	foreach $p (@$protos) {
-	    unlink("$tmpdir/$name.$p");
-	}
-	unlink("$tmpdir/$name.gpt");
-    }
-    return 1;
-}
-
-
-return 1;

mozilla/mstone/bin/mailmaster.pl

@@ -1,629 +0,0 @@
-#!/usr/bin/env perl
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-#			Mike Blakely
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-#  see setup.pl for full usage
-#	mailmaster [-d] [-c <config file>] ...
-
-# This script reads in the client configuration files and will
-# fork children to rsh the mailclient process on network clients,
-# each child will write test results to /mailstone directory before
-# dying.  The parent will the read and combine the results.
-#
-# Make sure the user running this script has rsh privilege across
-# all client machines
-
-print "Netscape Mailstone version 4.2\n";
-print "Copyright (c) Netscape Communications Corp. 1997-2000\n";
-
-# this parses the command line and config file
-do 'args.pl'|| die "$@\n";
-sub die_system;
-sub warn_system;
-
-parseArgs();			# parse command line
-
-{				# get unique date string
-    my ($sec, $min, $hour, $mday, $mon, $year) = localtime;
-    my $tstamp = sprintf ("%04d%02d%02d.%02d%02d",
-		       1900+$year, 1+$mon, $mday, $hour, $min);
-
-    if ( -d "$resultbase/$tstamp") { # check for runs within a minute
-	my $tail = 'a';
-	while ( -d "$resultbase/$tstamp$tail" ) { $tail++; }
-	$tstamp .= $tail;
-    }
-    $params{TSTAMP} = $tstamp;
-}
-
-$resultdir = "$resultbase/$params{TSTAMP}";
-$tmpdir = "$tmpbase/$params{TSTAMP}";
-$resultstxt = "$resultdir/results.txt";
-$resultshtml = "$resultdir/results.html";
-mkdir ("$resultbase", 0775);
-mkdir ("$tmpbase", 0775);
-mkdir ("$resultdir", 0775);
-mkdir ("$tmpdir", 0775);
-
-# Make sure we have everything
-die "Must specify the test time" unless $params{TIME};
-die "Must specify a workload file" unless $params{WORKLOAD};
-
-if ($params{TESTBED}) {		# BACK COMPATIBILITY
-    readTestbedFile ($params{TESTBED}) || die "Error reading testbed: $@\n";
-}
-
-$testsecs = figureTimeSeconds ($params{TIME}, "seconds");
-
-# figure out the processes and thread, given the desired number
-# takes into account all the constraints.  todo can be a float.
-sub figurePT {
-    my $sec = shift;
-    my $todo = shift;
-    my $p = 1;			# first guess
-    my $t = 1;
-    my $start = 1;		# initial process guess
-    my $end = 250;		# highest process guess
-
-    if ($todo < 1) {		# mark this client as inactive
-	$sec->{PROCESSES} = 0;
-	$sec->{THREADS} = 0;
-	return 0;
-    }
-
-    if (($section->{MAXCLIENTS}) && ($todo > $section->{MAXCLIENTS})) {
-	$todo = $section->{MAXCLIENTS};	# trim to max client per host
-    }
-    if ($section->{PROCESSES}) { # they set this part already
-	$start = int ($section->{PROCESSES});
-	$end = $start;
-	$p = $start;
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	print "Using specified $p processes for clients $slist\n";
-    }
-
-    $end = int ($section->{MAXPROCESSES})
-	if ($section->{MAXPROCESSES}); # they set a max
-    
-    if (($params{NT}) || ($section->{ARCH} eq "NT4.0")) {
-	$end = 1;		#  # NT is currently limited to 1 process
-	$start = 1;
-	$p = 1;
-    }
-
-    # step through some process counts
-    # it should first reduce errors due to MAXTHREADS,
-    # the it will reduce errors due to integer math.
-    # not optimal, just good enough
-    my $misses = 0;
-    for (my $n = $start; $n <= $end; $n++) { # try some process counts
-	my $tryt = int ($todo / $n);
-	if (($sec->{MAXTHREADS}) && ($tryt > $sec->{MAXTHREADS})) {
-	    $tryt = $sec->{MAXTHREADS};
-	}
-	# see if this is a better match than the last one
-	if (abs ($todo - ($n * $tryt)) < abs ($todo - ($p * $t))) {
-	    $p = $n;
-	    $t = $tryt;
-	    $misses = 0;
-	} else {
-	    $misses++;
-	    last if ($misses > 1); # getting worse
-	}
-    }
-    $sec->{PROCESSES} = $p;
-    $sec->{THREADS} = $t;
-    return $p * $t;
-}
-
-# Allocate CLIENTCOUNT to the client machines
-# try NOT to turn this into a massive linear programming project
-# works best to put bigger machines last
-if ($params{CLIENTCOUNT}) {
-    my $todo = $params{CLIENTCOUNT};
-    my $softcli = 0;		# how many can we play with
-
-    foreach $section (@workload) { # see which are already fixed
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	unless (($section->{PROCESSES}) && ($section->{THREADS})) {
-	    $softcli++;
-	    next;
-	}
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my @hlist = split /[\s,]/, $slist;
-	my $hcnt = (1 + $#hlist);
-
-	# subtract fixed entries
-	my $tcount = ($section->{THREADS}) ? $section->{THREADS} : 1;
-	$todo -= $tcount * $section->{PROCESSES} * $hcnt;
-	$clientProcCount += $section->{PROCESSES} * $hcnt; # total processes
-	$params{DEBUG} &&
-	    print "Fixed load group with $hcnt hosts: $section->{PROCESSES} x $tcount\n";
-    }
-
-    $params{DEBUG} &&
-	    print "Allocating $todo clients over $softcli groups\n";
-    if ($softcli) {
-	foreach $section (@workload) {
-	    next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	    next if (($section->{PROCESSES}) && ($section->{THREADS}));
-	    my $slist = $section->{sectionParams};
-	    $slist =~ s/HOSTS=\s*//; # strip off initial bit
-	    my @hlist = split /[\s,]/, $slist;
-	    my $hcnt = (1 + $#hlist);
-
-	    #print "todo=$todo softcli=$softcli hcnt=$hcnt\n";
-	    $todo -= $hcnt * figurePT ($section, $todo / ($softcli * $hcnt));
-	    $clientProcCount += $hcnt * $section->{PROCESSES}; # total procs
-
-	    $softcli--;
-	    last if ($softcli <= 0); # should not happen
-	}
-    }
-    if ($todo) {
-	print "Warning: Could not allocate $todo of $params{CLIENTCOUNT} clients.\n";
-	$params{CLIENTCOUNT} -= $todo;
-    }
-	    
-   
-} else {			# figure out the client count
-    my $cnt = 0;
-    foreach $section (@workload) { # see which are already fixed
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-#  	next unless ($section->{PROCESSES});
-	next unless $section->{CLIENTS};
-
-	my $clients = $section->{CLIENTS};
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my @hlist = split /[\s,]/, $slist;
-	my $hcnt = scalar @hlist;
-	
-	$clients /= $hcnt;
-	my $maxp = ($section->{MAXPROCESSES} || 10000);
-	my $maxt = ($section->{MAXTHREADS} || 10000);
-	if ($maxp * $maxt < $clients) {
-	    die <<EOS;
-Too many clients for hosts $section->{sectionParams}:
-clients 	= $section->{CLIENTS}
-maxThreads 	= $section->{MAXTHREADS}
-maxProcesses 	= $section->{MAXPROCESSES}
-EOS
-	}
-	my ($nt, $np);
-	if ($maxt >= $clients) {
-	    $nt = $clients;
-	    $np = 1;
-	} else {
-	    $np = int (($clients / $maxt) + (($clients % $maxt) ? 1 : 0));
-	    $nt = int ($clients / $np);
-	}
-
-	$section->{THREADS} = $nt;
-	$section->{PROCESSES} = $np;
-#  	$section->{CLIENTS} = $np * $nt * $hcnt;
-	$cnt += $nt * $np * $hcnt;
-	$clientProcCount += $np * $hcnt; # total processes
-    }
-    $params{CLIENTCOUNT} = $cnt;
-    die "No clients configured!\n" unless ($cnt > 0);
-}
-
-# This has to be written into save workload file for later processing
-unless ($params{FREQUENCY}) {	# unless frequency set on command line
-    my $chartp = ($params{CHARTPOINTS}) ? $params{CHARTPOINTS} : 464;
-
-    # approximate data points for good graphs (up to 2 times this)
-    $params{FREQUENCY} = int ($testsecs / $chartp);
-    if ($params{FREQUENCY} < 2) { # fastest is every 2 seconds
-	$params{FREQUENCY} = 2;
-    } elsif ($params{FREQUENCY} > 60) {	# slowest is every minute
-	$params{FREQUENCY} = 60;
-    }
-}
-
-{ # set a unique block id on every section
-    my $id = 0;
-    my $configSeen = 0;
-    my $defaultSeen = 0;
-    foreach $section (@workload) {
-	if ($section->{"sectionTitle"} =~ /^CONFIG$/) {
-	    next if $configSeen;
-	    $configSeen++;
-	}
-	if ($section->{"sectionTitle"} =~ /^DEFAULT$/) {
-	    next if $defaultSeen;
-	    $defaultSeen++;
-	}
-	$id++;			# number 1, 2, ...
-	if ($section->{"sectionTitle"} =~ /^(CONFIG|CLIENT)$/) {
-	    $section->{BLOCKID} = $id;
-	} else {
-	    push @{$section->{"lineList"}}, "blockID\t$id\n";
-	}
-    }
-}
-
-# Write the version we pass to mailclient
-writeWorkloadFile ("$resultdir/work.wld", \@workload,
-		   \@scriptWorkloadSections);
-
-# Write the complete inclusive version
-writeWorkloadFile ("$resultdir/all.wld", \@workload);
-
-# SEAN: copy the wld.in file to the result directory for later
-# statistics gathering.
-my $wld = $params{WORKLOAD};
-if (-f "$wld.in") {
-    die_system "cp $wld.in $resultdir/wld.in";
-} else {
-    unless ($wld !~ /\.preload_(new|old|touch)$/) {
-	warn "Can't find wld.in file for `$wld'\n" unless -f "$wld.in";
-    }
-}
-
-setConfigDefaults();		# pick up any missing defaults
-
-unless ($#protocolsAll > 0) {
-    die "No protocols found.  Test Failed!\n";
-}
-
-print "Starting: ", scalar(localtime), "\n";
-
-# redirect STDERR
-open SAVEERR, ">&STDERR";
-open(STDERR, ">$resultdir/stderr") || warn "Can't redirect STDERR:$!\n";
-
-$totalProcs = 0;		# number of clients started
-
-# iterate over every client in the testbed, complete the cmd and rsh
-if ($params{NT}) {		# single client on local host 
-    pathprint ("Starting clients (errors logged to $resultdir/stderr)\n");
-
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	my $tcount = ($section->{THREADS}) ? $section->{THREADS} : 1;
-
-
-	# Build the initial Mailclient command line
-	my $preCmd = ($section->{COMMAND})
-	    ? $section->{COMMAND} : $params{CLIENTCOMMAND};
-	$preCmd .= " -s -t $params{TIME} -f $params{FREQUENCY}";
-	$preCmd .= " -d" if ($params{DEBUG});
-	$preCmd .= " -r" if ($params{TELEMETRY});
-	$preCmd .= " -R $params{RAMPTIME}" if ($params{RAMPTIME});
-	$preCmd .= " -m $params{MAXERRORS}" if ($params{MAXERRORS});
-	$preCmd .= " -M $params{MAXBLOCKS}" if ($params{MAXBLOCKS});
-	$preCmd .= " -n 1 -N $tcount";
-	$preCmd .= ($params{USEGROUPS} && $section->{GROUP})
-	    ? " -H $section->{GROUP}" : " -H $cli";
-
-	my $stdout = "$tmpdir/localhost.out";
-
-	$totalProcs += $tcount;
-	do 'makeindex.pl' || warn "$@\n";	# html index
-
-	printf "\nTest duration: %d %s.  Rampup time: %d %s.  Number of clients: %d\n",
-	figureTimeNumber ($params{TIME}),
-	figureTimeUnits ($params{TIME}, "seconds"),
-	figureTimeNumber ($params{RAMPTIME}),
-	figureTimeUnits ($params{RAMPTIME}, "seconds"),
-	$totalProcs;
-
-	print STDERR  "localhost: cd $params{TEMPDIR}; $preCmd\n";
-
-	# Redirect STDIN, and STDOUT
-	#open SAVEIN, "<STDIN";
-	open STDIN, "<$resultdir/work.wld"
-	    || die "Coundn't open $resultdir/work.wld for input\n";
-	open SAVEOUT, ">&STDOUT";
-	open STDOUT, ">$stdout"
-	    || die "Couldnt open $stdout for output\n";
-
-	chdir $params{TEMPDIR} || die "Could not cd $params{TEMPDIR}: $!\n";
-	warn_system $preCmd;
-	close STDOUT;
-	open STDOUT, ">&SAVEOUT";
-	printf "Test done.\n";
-
-	chdir $cwd || die "Could not cd $cwd: $!\n";
-	last;			# only do the first one
-    }
-} else {			# not NT (forking works)
-
-    foreach $section (@workload) {	# do pre run commands
-	next unless ($section->{sectionTitle} =~ /PRETEST/i);
-	unless ($section->{COMMAND}) {
-	    print "PreTest with no Command for $section->{sectionParams}\n";
-	    next;
-	}
-
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my $myCmd = $section->{COMMAND};
-	$myCmd =~ s/%f/$params{FREQUENCY}/; # fill in frequency variable
-	if ($myCmd =~ m/%c/o) { # dont force down if count is used
-	    $count = $testsecs / $params{FREQUENCY};
-	    $myCmd =~ s/%c/$count/; # fill in count variable
-	}
-	my $rsh = ($section->{RSH}) ? $section->{RSH} : $params{RSH};
-
-	foreach $cli (split /[\s,]/, $slist) {
-	    print "Running pre test command on $cli\n";
-	    open PRE, ">>$resultdir/$cli-pre.log";
-	    print PRE "========\n";
-	    print PRE "$myCmd\n";
-	    print PRE "========\n";
-	    close PRE;
-	    print STDERR "$cli: $myCmd\n"; # log the actual command
-	    forkproc ($rsh, $cli, $myCmd,
-		      "/dev/null", "$resultdir/$cli-pre.log");
-	}
-	foreach $cli (split /[\s,]/, $slist) {
-	    wait();		# run multiple PRETEST section sequentially
-	}
-    }
-
-    foreach $section (@workload) { # start monitors
-	next unless ($section->{sectionTitle} =~ /MONITOR/i);
-
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my $myCmd = ($section->{COMMAND})
-	    ? $section->{COMMAND} : $params{MONITORCOMMAND};
-	my $forceDown = 0;
-	$myCmd =~ s/,/ /g;	# turn commas into spaces BACK COMPATIBIILITY
-	$myCmd =~ s/%f/$params{FREQUENCY}/; # fill in frequency variable
-
-	if ($myCmd =~ m/%c/o) { # dont force down if count is used
-	    $count = $testsecs / $params{FREQUENCY};
-	    $myCmd =~ s/%c/$count/; # fill in count variable
-	} else {
-	    $forceDown = 1;
-	}
-	my $rsh = ($section->{RSH}) ? $section->{RSH} : $params{RSH};
-
-	foreach $cli (split /[\s,]/, $slist) {
-	    printf "Monitoring on $cli\n";
-	    open PRE, ">>$resultdir/$cli-run.log";
-	    print PRE "========\n";
-	    print PRE "$myCmd\n";
-	    print PRE "========\n";
-	    close PRE;
-	    print STDERR "$cli: $myCmd\n"; # log the actual command
-	    $pid = forkproc ($rsh, $cli, $myCmd,
-			     "/dev/null", "$resultdir/$cli-run.log");
-	    push @forceDownPids, $pid if ($forceDown); # save PID for shutdown
-	}
-    }
-
-    print "Starting clients (errors logged to $resultdir/stderr)\n";
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	next unless ($section->{PROCESSES}); # unused client
-
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my $rsh = ($section->{RSH}) ? $section->{RSH} : $params{RSH};
-	my $pcount = $section->{PROCESSES};
-	my $tcount = ($section->{THREADS}) ? $section->{THREADS} : 0;
-	my $tempdir;
-	if ($section->{TEMPDIR}) {
-	    $tempdir = $section->{TEMPDIR};
-	} elsif ($params{TEMPDIR}) {
-	    $tempdir = $params{TEMPDIR};
-	}
-	my $preCmd = "./" . (($section->{COMMAND})
-			     ? $section->{COMMAND} : $params{CLIENTCOMMAND});
-	$preCmd .= " -e" unless ($params{NOEVENTS});
-	$preCmd .= " -s -t $params{TIME} -f $params{FREQUENCY}";
-	$preCmd .= " -d" if ($params{DEBUG});
-	$preCmd .= " -r" if ($params{TELEMETRY});
-	$preCmd .= " -R $params{RAMPTIME}" if ($params{RAMPTIME});
-	if ($params{MAXERRORS}) {
-	    # distribute error count over processes, rounding up
-	    my $n = int (($params{MAXERRORS} + $clientProcCount - 1)
-			 / $clientProcCount);
-	    $n = 1 if ($n < 1);
-	    $preCmd .= " -m $n";
-	}
-	if ($params{MAXBLOCKS}) {
-	    # distribute block count over processes, rounding up
-	    my $n = int (($params{MAXBLOCKS} + $clientProcCount - 1)
-			 / $clientProcCount);
-	    $n = 1 if ($n < 1);
-	    $preCmd .= " -M $n";
-	}
-	$preCmd = "cd $tempdir; " . $preCmd if ($tempdir);
-	$preCmd =~ s!/!\\!g if ($section->{ARCH} eq "NT4.0");
-	$preCmd =~ s/;/&&/g if ($section->{ARCH} eq "NT4.0");
-
-        my $total_clients = $section->{CLIENTS};
-	my $residue = $total_clients - ($tcount * $pcount);
-	foreach $cli (split /[\s,]/, $slist) {
-	    my $stdout = getClientFilename ($cli, $section);
-	    my $myCmd = $preCmd;
- 	    $myCmd .= ($params{USEGROUPS} && $section->{GROUP})
-		? " -H $section->{GROUP}" : " -H $cli";
-	    my $foo = ($params{USEGROUPS} && $section->{GROUP})
-		? $section->{GROUP} : undef;
-
-	    if ($tcount) {
-		my $nt = $tcount;
-		if ($residue > 0) {
-		    ++$nt;
-		    $residue -= $pcount;
-		}
-		$myCmd .= " -n $pcount -N $nt";
-		printf "Starting $pcount x $nt on $cli%s\n", 
-		    $foo?" (group = $foo)":'';
-		$totalProcs += $pcount * $nt;
-	    } else {
-		my $np = $pcount;
-		if ($residue > 0) {
-		    ++$np;
-		    --$residue;
-		}
-		$myCmd .= " -n $np";
-		printf "Starting $np processes on $foo\n";
-		$totalProcs += $np;
-	    }
-
-	    print STDERR "$cli: $myCmd\n"; # log the actual command
-	    $pid = forkproc ($rsh, $cli, $myCmd,
-			     "$resultdir/work.wld", $stdout);
-	    push @localPids, $pid if ($cli =~ /^localhost$/i);
-	}
-    }
-
-    if (@localPids) {
-	# print "Trapping extraneous local signals\n";
-	# This doesnt trap quite right.  We dont die, but shell returns...
-	$SIG{ALRM} = 'IGNORE';	# in case we get an ALRM from the mailclient
-    }
-
-    printf "\nTest duration: %d %s.  Rampup time: %d %s.  Number of clients: %d\n",
-    figureTimeNumber ($params{TIME}),
-    figureTimeUnits ($params{TIME}, "seconds"),
-    figureTimeNumber ($params{RAMPTIME}),
-    figureTimeUnits ($params{RAMPTIME}, "seconds"),
-    $totalProcs;
-
-    do 'makeindex.pl' || warn "$@\n";	# html index
-
-    print "Waiting for test to finish.\n";
-    print "Waiting: ", scalar(localtime), "\n";
-    # wait for children to finish
-    $pid = wait();
-    if (@forceDownPids) {		# shut down after the first return.
-	print "Shutting down @forceDownPids\n";
-	kill 1 => @forceDownPids;	# sigHUP
-	# kill 9 => @forceDownPids;	# sigTERM
-    }
-    while ($pid != -1) {	# wait for all children
-	$pid = wait();
-    }
-
-    foreach $section (@workload) {	# do post test commands
-	next unless ($section->{sectionTitle} =~ /POSTTEST/i);
-	unless ($section->{COMMAND}) {
-	    print "PostTest with no command for $section->{sectionParams}\n";
-	    next;
-	}
-
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my $myCmd = $section->{COMMAND};
-	$myCmd =~ s/%f/$params{FREQUENCY}/; # fill in frequency variable
-	if ($myCmd =~ m/%c/o) { # dont force down if count is used
-	    $count = $testsecs / $params{FREQUENCY};
-	    $myCmd =~ s/%c/$count/; # fill in count variable
-	}
-	my $rsh = ($section->{RSH}) ? $section->{RSH} : $params{RSH};
-
-	foreach $cli (split /[\s,]/, $slist) {
-	    printf "Running post test command on $cli\n";
-	    open PRE, ">>$resultdir/$cli-post.log";
-	    print PRE "========\n";
-	    print PRE "$myCmd\n";
-	    print PRE "========\n";
-	    close PRE;
-	    print STDERR "$cli: $myCmd\n"; # log the actual command
-	    forkproc ($rsh, $cli, $myCmd,
-		      "/dev/null", "$resultdir/$cli-post.log");
-	}
-	foreach $cli (split /[\s,]/, $slist) {
-	    wait();		# run multiple POSTTEST section sequentially
-	}
-    }
-
-}
-
-print STDERR "\nDone.\n";
-close(STDERR);
-open STDERR, ">&SAVEERR";
-
-print "\nClients done: ", scalar(localtime), "\n";
-print "Collecting results\n";
-
-do 'reduce.pl' || die "$@\n";	# generate graphs and sums
-
-print "Generating results pages\n";
-
-do 'report.pl' || die "$@\n";
-
-# Now display that data to console
-if ($params{VERBOSE}) {
-    fileShow ($resultstxt);
-    print "\n";
-}
-print "Processing done: ", scalar (localtime), "\n";
-
-pathprint ("\nResults (text):\t$resultstxt\n");
-pathprint (  "Results (HTML):\t$resultshtml\n");
-print        "Index of runs: \tfile://$cwd/$resultbase/index.html\n";
-
-
-# Now check for major problems in the stderr file
-if (open(RESULTSTXT, "$resultdir/stderr")) {
-    $ERRCNT=0;
-    while (<RESULTSTXT>) { $ERRCNT++; }
-    close(RESULTSTXT);
-    pathprint ("Error log ($ERRCNT lines):\t$resultdir/stderr\n");
-}
-
-{				# list user requested logging
-    my @logfiles = <$resultdir/*-pre.log>;
-    if (@logfiles) {
-	foreach $f (@logfiles) {
-	    print "Pre test log:   \t$f\n";
-	}
-    }
-    @logfiles = <$resultdir/*-run.log>;
-    if (@logfiles) {
-	foreach $f (@logfiles) {
-	    print "Monitoring log: \t$f\n";
-	}
-    }
-    @logfiles = <$resultdir/*-post.log>;
-    if (@logfiles) {
-	foreach $f (@logfiles) {
-	    print "Post test log:  \t$f\n";
-	}
-    }
-}
-
-print "Mailmaster done: ", scalar(localtime), "\n"; exit 0;

mozilla/mstone/bin/makeindex.pl

@@ -1,115 +0,0 @@
-#!/usr/bin/env perl
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# usage: perl -Ibin makeindex.pl
-# Look at all the results files and create a top level index
-
-unless ($resultbase) {		# pick up systematic defaults, if needed
-    do 'args.pl'|| die $@;
-    parseArgs();		# parse command line
-}
-
-($testname = $params{WORKLOAD}) =~ s:conf/::;
-$testname =~ s:.wld::;
-
-my $entry = "";
-
-$entry .= "<TR><TD><BR><A HREF=\"$params{TSTAMP}/results.html\">$params{TSTAMP}</A></TD>";
-$entry .= "<TD>$testname</TD>\n";
-$entry .= "<TD>$params{TITLE}</TD>\n";
-$entry .= "<TD>$params{TIME}</TD>\n";
-$entry .= "<TD>$params{CLIENTCOUNT}</TD>\n";
-$entry .= "<TD><A HREF=\"$params{TSTAMP}/all.wld\">workload</A></TD>\n";
-$entry .= "<TD><A HREF=\"$params{TSTAMP}/stderr\">stderr</A></TD></TR>\n";
-
-if (-r "$resultbase/index.html") {
-    fileInsertAfter ("$resultbase/index.html",
-		     "^<!-- INSERT TAGS HERE",
-		     $entry);
-} else {			# create index from scratch
-    system ("cd $resultbase; ln -s ../doc .");
-    open(INDEXNEW, ">$resultbase/index.new") || 
-	die "Couldn't open $resultbase/index.new: $!";
-
-    print INDEXNEW <<END;
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
-<HTML>
-<TITLE>
-MailStone Results
-</TITLE>
-<HEAD>
-</HEAD>
-<BODY TEXT="#000000" BGCOLOR="#FFFFFF" LINK="#0000FF" VLINK="#FF0000" ALINK="#000088">
-<A HREF=$mailstoneURL>Mailstone documentation</A><BR>
-<TABLE BORDER=2>
-<CAPTION> Mozilla MailStone Results Index </CAPTION>
-<TR>
-<TH>Run</TH> <TH>Testname</TH> <TH> Title </TH>
-    <TH>Duration</TH> <TH>Clients</TH> <TH>Details</TH> <TH>Error log</TH> 
-</TR>
-<!-- INSERT TAGS HERE - DO NOT DELETE THIS LINE -->
-END
-
-    print INDEXNEW $entry;	# put in this entry
-
-    # Add in any existing entries
-    # get a list of all the results files
-    @resall = <$resultbase/*/results.html>;
-    # Write out all the links
-    # This could be rather slow, but we only do it when index.html is missing
-    foreach $filefull (reverse @resall) {
-	my $file = $filefull;
-	$file =~ s:$resultbase/::;
-	if ($file eq $params{TSTAMP}) { next; } # written above
-	my $dir = $file;
-	$dir =~ s:/results.html::;
-	# dont read in old workloads, it will override the current one
-	print INDEXNEW "<TR><TD><BR><A HREF=\"$file\">$dir</A></TD>\n";
-	print INDEXNEW "<TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD>\n";
-	print INDEXNEW "<TD><A HREF=\"$dir/all.wld\">workload</A></TD>\n";
-	print INDEXNEW "<TD><A HREF=\"$dir/stderr\">stderr</A></TD></TR>\n";
-    }
-
-    print INDEXNEW <<END;
-</TABLE>
-</BODY>
-</HTML>
-END
-    close (INDEXNEW);
-    fileBackup ("$resultbase/index.html");
-    rename ("$resultbase/index.new", "$resultbase/index.html");
-    print "Created $resultbase/index.html\n";
-}
-
-return 1;

mozilla/mstone/bin/makeusers.pl

@@ -1,414 +0,0 @@
-#!/usr/bin/perl
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# script to create test user accounts for Netscape Messaging Server 3, 4
-#
-# Given a set of parameters, this script will create an LDIF file
-# for a number of email users of the form:
-#	test1, test2, test3, ...	
-#
-# usage: perl create_accounts_ldif [users] [broadcast] [postmaster] [ options ]
-#   [ -a allUsersAlias ]
-#   [ -b basedn ]
-#   [ -d maildomain ]
-#   [ -f firstaccount ]
-#   [ -k ]
-#   [ -m mailhost ]
-#   [ -n numaccounts ]
-#   [ -o outputfile ]
-#   [ -p password ]
-#   [ -s storebase ]
-#   [ -u username ]
-#   [ -v ]
-#   [ -w workload ]
-#   [ -x maxstores ]
-#   [ -3 ]
-#
-#perl -Ibin -- bin/makeusers.pl -d mailhost.example.com -m mailhost.example.com -b 'o=example.com' -u mailhost-test -n 100 -4 -o mailhost100.ldif
-
-# Create the ldif for the user accounts and/or broadcast, postmaster account.
-#
-# The ldif then must be added to 
-# the directory by hand (ldapadd, or through the dir admin server's
-# Database Mgmt->Add entries from an ldif file).  
-
-# A faster way
-# is to export the existing directory, append the results of
-# this script, and re-import the combined file.  This can be
-# done using the following Netscape Directory Server commands:
-#   stop-slapd
-#   db2ldif outputfile
-#   [ merge files ]
-#   ldif2db inputfile  # for DS4 you would typically use -noconfig
-#   start-sladp
-#
-
-print "Netscape Mailstone.\nCopyright (c) 1998,1999 Netscape Communications Corp.\n";
-
-# server to be used in the internet mail address of the users
-$domain = "newdomain.example.net";
-
-# machine that will act as the user's mailhost
-$mailhost = "mailhost.example.net";
-
-# base dn for the user entries, e.g. o=Ace Industry,c=US 
-$basedn = "o=Benchmark Lab, c=US";
-
-# name of broadcast account
-$bcastacct = "allusers";
-
-# name of broadcast account
-$postmasteraddr = "root\@localhost";
-
-# base name to build user names, will construct test0, test1, ...
-$username = "test%ld";
-
-# user passwds, in SHA format, the passwd below is 'netscape'
-#$userpassword =  "{SHA}aluWfd0LYY9ImsJb3h4afrI4AXk=";
-# these can also be imported as cleartext
-$userpassword = "netscape";
-
-# 0: no numbered passwords, 1: number with userID
-$maxpass = 0;
-
-# first account to use
-$firstaccount = 0;
-
-# number of user accounts to create ($first - $first+$num-1)
-$numaccounts = 1_000;
-
-# For larger systems, spreading the users over multiple partitions
-# is usually a good idea.  This example assumes you have
-# created partitions named p0, p1, etc.
-
-# store partition base name
-$storebase = "p%ld";
-
-# max store number (0 - maxstores-1), skip if 0
-$maxstores = 0;
-
-#default to msg 4 schemas
-$usemsg4schema = 1;
-
-#default to writing to stdout
-$outfile = STDOUT;
-
-# Initial UID for genpasswd
-$firstuid = 1000;
-
-sub usage {
-    print "Usage: perl -Ibin -- makeusers [users] [broadcast] [postmaster]\n";
-    print "\t[ -w workload ] [ -o outputFile ]\n";
-    print "\t[ -d mailDomain ] [ -m mailHost ] [ -b baseDN ]\n";
-    print "\t[ -u username ] [ -f firstAccount ] [ -n numAccounts ]\n";
-    print "\t[ -p password ] [ -k ]\n";
-    print "\t[ -s storeBase ] [ -x numStores ]\n";
-    print "\t[ -a allUsersAlias ] [ -t postmasterAddress ]\n";
-    print "\t[ -3 ]|[ -4 ]\n";
-}
-
-sub readWorkConfig {		# read the workload in, parse our params
-    my $workloadfile = shift || die "Workload file name expected\n";
-
-    do 'args.pl'|| die $@;
-    readWorkloadFile ($workloadfile, \@workload)
-	|| die "Error reading workload: $@\n";
-				# assign all the parameters from the config
-    $mailhost = $defaultSection->{SERVER}
-	if ($defaultSection->{SERVER});
-    if ($defaultSection->{ADDRESSFORMAT}) {
-	my $addr = $defaultSection->{ADDRESSFORMAT};
-	$addr =~ s/^.*@//;
-	$domain = $addr;
-    }
-    if ($defaultSection->{LOGINFORMAT}) {
-	my $user = $defaultSection->{LOGINFORMAT};
-	#$user =~ s/%ld$//;
-	$username = $user;
-    }
-    $numaccounts = $defaultSection->{NUMLOGINS}
-        if ($defaultSection->{NUMLOGINS});
-    $firstaccount = $defaultSection->{FIRSTLOGINS}
-        if ($defaultSection->{FIRSTLOGINS});
-
-    $userpassword = $defaultSection->{PASSWDFORMAT}
-    if ($defaultSection->{SERVER});
-
-    if ($userpassword =~ m/%ld/) { # see if numbered passwords
-	$maxpass++;
-	#$userpassword =~ s/%ld//g;
-    }
-
-    # what isnt set: basedn, storebase, maxstores, usemsg4schema
-}
-
-while (@ARGV) {
-    $arg = shift(@ARGV);
-
-    if ($arg =~ /^-a$/i) {	# allusers (broadcast) user name
-	$bcastacct = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-b$/i) {	# LDAP base DN
-	$basedn = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-d$/i) {	# mail domain
-	$domain = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-f$/i) {	# initial account
-	$firstaccount = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-k$/i) {	# use numbered passwords
-	$maxpass++;
-	next;
-    }
-    if ($arg =~ /^-h$/i) {	# help
-	usage();
-	exit 0;
-    }
-    if ($arg =~ /^-m$/i) {	# mail server name
-	$mailhost = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-n$/i) {	# number of accounts
-	$numaccounts = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-o$/i) {	# name output file
-	my $fname = shift || die "File name expected\n";
-	open OUTFILE, ">$fname" || die "Error opening file $@\n";
-	$outfile = OUTFILE;
-	next;			# use msg4 user admin schema
-    }
-    if ($arg =~ /^-p$/i) {	# password
-	$userpassword = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-s$/i) {	# base name for above
-	$storebase = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-t$/i) {	# postmaster address
-	$postmasteraddress = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-u$/i) {	# user name base
-	$username = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-v$/i) {	# be verbose
-	$verbose++;
-	next;
-    }
-    # do this when read, so that later switches can override
-    if ($arg =~ /^-w$/i) {	# get a workload file
-	readWorkConfig (shift(@ARGV));
-	next;
-    }
-    if ($arg =~ /^-x$/i) {	# number of partitions (0 to skip)
-	$maxstores = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-3$/) {	# no msg4 schema
-	$usemsg4schema = 0;
-	next;
-    }
-    if ($arg =~ /^-4$/) {	# use msg4 user admin schema
-	$usemsg4schema = 1;
-	next;
-    }
-    if ($arg =~ /^users$/i) {
-	$genusers++;
-	next;
-    }
-    if ($arg =~ /^broadcast$/i) {
-	$genbroadcast++;
-	next;
-    }
-    if ($arg =~ /^passwd$/i) {
-	$genpasswd++;
-	next;
-    }
-    if ($arg =~ /^postmaster$/i) {
-	$genpostmaster++;
-	next;
-    }
-
-    print STDERR "Unknown argument $arg.  Use -h for help.\n";
-    exit 1;
-}
-
-unless (($genusers) || ($genbroadcast) || ($genpasswd) || ($genpostmaster)) {
-    print STDERR "Must specify mode [users] [broadcast] [postmaster] ...\n";
-    usage();
-    exit 0;
-}
-
-# specify number fields, if needed
-unless ($username =~ /%ld/) {
-    $username .= '%ld';
-}
-if (($maxpass) && !($userpassword =~ /%ld/)) {
-    $userpassword .= '%ld';
-}
-if (($maxstores) && !($storename =~ /%ld/)) {
-    $storename .= '%ld';
-}
-
-if ($verbose) {
-    print STDERR "Here is the configuration:\n";
-    print STDERR "baseDN='$basedn' \t";
-    print STDERR (($usemsg4schema) ? "-4\n" : "-3\n");
-    print STDERR "mailHost='$mailhost' \tdomain='$domain'\n";
-    print STDERR "userName='$username' \tnumAccounts=$numaccounts \tfirstAccount=$firstaccount\n";
-    print STDERR "userPassword='$userpassword'\n";
-    print STDERR "allUsersAccount='$bcastacct'\n" if ($genbroadcast);
-    print STDERR "postmasterAddress='$postmasterAddress'\n" if ($genpostmaster);
-}
-
-
-if ($genusers) {		# Create the user accounts
-    $storenum=0;
-    for ($i = $firstaccount; $i < $firstaccount+$numaccounts; $i++) {
-	# build user account name
-	my $acctname = $username;
-	$acctname =~ s/%ld/$i/;	# insert user number
-	my $password = $userpassword;
-	$password =~ s/%ld/$i/;	# insert user number
-
-
-
-	# MAKE SURE THERE ARE NO TRAILING SPACES IN THE LDIF
-	my $extradata = "";
-
-	if ($maxstores > 0) {	# assign them to a store
-	    my $storename = $storebase;
-	    $storename =~ s/%ld/$storenum/;
-	    $extradata .= "mailmessagestore: $storename\n";
-	    $storenum++;
-	    $storenum=0 if ($storenum >= $maxstores);
-	}
-
-	$extradata .= "objectclass: nsMessagingServerUser\n"
-	    if ($usemsg4schema);
-
-print $outfile <<END;
-dn: uid=$acctname, $basedn
-userpassword: $password
-givenname: $acctname
-sn: $acctname
-cn: $acctname
-uid: $acctname
-mail: $acctname\@$domain
-mailhost: $mailhost
-maildeliveryoption: mailbox
-objectclass: top
-objectclass: person
-objectclass: organizationalPerson
-objectclass: inetOrgPerson
-objectclass: mailRecipient
-$extradata
-END
-    }
-}
-
-if ($genbroadcast) {		# Create the broadcast account
-    # MAKE SURE THERE ARE NO TRAILING SPACES IN THE LDIF
-    my $password = $userpassword;
-    $password =~ s/%ld//;	# strip user number
-    # initial part
-    print $outfile <<END;
-dn: uid=$bcastacct, $basedn
-userpassword: $password
-givenname: $bcastacct
-sn: $bcastacct
-cn: $bcastacct
-uid: $bcastacct
-mail: $bcastacct\@$domain
-mailhost: $mailhost
-maildeliveryoption: forward
-END
-
-    # now put in each address
-    for ($i = $firstaccount; $i < $firstaccount+$numaccounts; $i++) {
-	# build user account name
-	my $acctname = $username;
-	$acctname =~ s/%ld/$i/;	# insert user number
-
-	print $outfile "mailforwardingaddress: $acctname\@$domain\n";
-    }
-
-    # final part
-    print $outfile <<END;
-objectclass: top
-objectclass: person
-objectclass: organizationalPerson
-objectclass: inetOrgPerson
-objectclass: mailRecipient
-
-END
-}
-
-if ($genpostmaster) {		# Create the postmaster account
-    # MAKE SURE THERE ARE NO TRAILING SPACES IN THE LDIF
-    print $outfile <<END;
-dn: cn=postmaster, $basedn
-cn: postmaster
-mail: postmaster\@$domain
-mailalternateaddress: postmaster\@$mailhost
-mgrprfc822mailmember: $postmasterAddress
-objectclass: top
-objectclass: mailGroup
-objectclass: groupOfUniqueNames
-
-END
-}
-
-# mixing passwd output with the ldif output above would be quite silly
-if ($genpasswd) {		# Create passwd entries for makeusers
-    for ($i = $firstaccount; $i < $firstaccount+$numaccounts; $i++) {
-	# build user account name
-	my $acctname = $username;
-	$acctname =~ s/%ld/$i/;	# insert user number
-	my $password = $userpassword;
-	$password =~ s/%ld/$i/;	# insert user number
-	my $uid = $firstuid + $i;
-	print $outfile "$acctname:$password:$uid:$uid:Mail user $acctname:/home/$acctname:/bin/sh\n";
-    }
-}
-
-exit 0;

mozilla/mstone/bin/nsarch

@@ -1,147 +0,0 @@
-#!/bin/sh
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1999-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# Figure out standard system names
-
-UNAME_REPORTS=`uname`
-UNAME_OS_ARCH=`uname -s`
-UNAME_OS_RELEASE=`uname -r`
-
-OS_ARCH=$UNAME_OS_ARCH
-OS_RELEASE=$UNAME_OS_RELEASE
-OS_CONFIG=${OS_ARCH}${OS_RELEASE}
-
-if [ "$UNAME_OS_ARCH" = "SunOS" ]; then
-  PROCESSOR=`uname -p`
-  if [ "$PROCESSOR" = "i386" ]; then
-    BUILD_ARCH=x86
-  else
-    BUILD_ARCH=SPARC
-  fi
-  BUILD_OS=SOLARIS
-  if [ "$UNAME_OS_RELEASE" = "5.5" ]; then
-    BUILD_VER=2.5
-  elif [ "$UNAME_OS_RELEASE" = "5.5.1" ]; then
-    BUILD_VER=2.5
-  elif [ "$UNAME_OS_RELEASE" = "5.6" ]; then
-    BUILD_VER=2.6
-  elif [ "$UNAME_OS_RELEASE" = "5.7" ]; then
-    BUILD_VER=7
-  elif [ "$UNAME_OS_RELEASE" = "5.8" ]; then
-    BUILD_VER=8
-  fi
-
-elif [ "$UNAME_OS_ARCH" = "HP-UX" ]; then
-  BUILD_ARCH=HPPA
-  BUILD_OS=$UNAME_OS_ARCH
-  BUILD_VER=$OS_RELEASE
-
-elif [ "$UNAME_OS_ARCH" = "AIX" ]; then
-  BUILD_ARCH=POWER
-  BUILD_OS=$UNAME_OS_ARCH
-  BUILD_VER=`uname -v`.`uname -r`
-  OS_CONFIG=${BUILD_OS}${BUILD_VER}
-
-elif [ "$UNAME_OS_ARCH" = "OSF1" ]; then
-  BUILD_ARCH=ALPHA
-  BUILD_OS=$UNAME_OS_ARCH
-  BUILD_VER=$OS_RELEASE
-
-elif [ "$UNAME_OS_ARCH" = "IRIX64" -o "$UNAME_OS_ARCH" = "IRIX" ]; then
-  BUILD_ARCH=MIPS
-  BUILD_OS=IRIX
-  BUILD_VER=$OS_RELEASE
-  OS_CONFIG=${BUILD_OS}${OS_RELEASE}
-
-elif [ "$UNAME_OS_ARCH" = "BSD/386" ]; then
-  BUILD_ARCH=x86
-  BUILD_OS=BSDI
-  BUILD_VER=$OS_RELEASE
-
-elif [ "$UNAME_OS_ARCH" = "FreeBSD" ]; then
-  BUILD_ARCH=`uname -p`
-  BUILD_OS=$UNAME_OS_ARCH
-  BUILD_VER=$UNAME_OS_RELEASE
-  if [ "$BUILD_ARCH" = "i386" ]; then
-    BUILD_ARCH=x86
-  fi
-  OS_CONFIG=${BUILD_OS}${BUILD_VER}_${BUILD_ARCH}
-
-elif [ "$UNAME_OS_ARCH" = "SCO_SV" ]; then
-  BUILD_ARCH=x86
-  BUILD_OS=SCO
-  BUILD_VER=$OS_RELEASE
-
-elif [ "$UNAME_OS_ARCH" = "UNIX_SV" ]; then
-  # Check for braindamage
-  grep NCR /etc/bcheckrc > /dev/null 2>&1
-  BUILD_ARCH=x86
-  if [ $? = 0  ]; then
-      BUILD_OS=NCR
-  else
-      BUILD_OS=UNIXWARE
-  fi
-  BUILD_VER=$OS_RELEASE
-
-elif [ "$UNAME_OS_ARCH" = "NEWS-OS" ]; then
-  BUILD_ARCH=`uname -p`
-  BUILD_OS=SONY
-  BUILD_VER=$OS_RELEASE
-
-elif [ "$UNAME_OS_ARCH" = "UNIX_System_V" ]; then
-  BUILD_ARCH=`uname -p`
-  BUILD_OS=NEC
-  BUILD_VER=$OS_RELEASE
-
-elif [ $UNAME_OS_ARCH = Linux ]; then
-  BUILD_ARCH=`uname -m`
-  if [ -n "`echo $BUILD_ARCH | grep -e '86$'`" ] ; then
-	  BUILD_ARCH=x86
-  fi
-  BUILD_OS=$UNAME_OS_ARCH
-  BUILD_VER=`echo $OS_RELEASE | cut -f1,2 -d.`
-  OS_CONFIG=${BUILD_OS}${BUILD_VER}_${BUILD_ARCH}
-fi
-
-case "$UNAME_OS_ARCH" in
-SINIX*|ReliantUNIX*)
-  BUILD_ARCH=`uname -p`
-  BUILD_OS="ReliantUNIX"
-  BUILD_VER=$OS_RELEASE
-  ;;
-esac
-
-#PLATFORM=${BUILD_ARCH}_${BUILD_OS}_${BUILD_VER}
-#echo $PLATFORM
-echo $OS_CONFIG

mozilla/mstone/bin/process

@@ -1,70 +0,0 @@
-#!/bin/sh
-# The conZtents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1999-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# re-process a data run
-# by default, use the most recent one
-# Usage: process
-# or
-# Usage: process TIMESTAMP [args...]
-# or
-# Usage: process results/TIMESTAMP [args...]
-
-if [ ! -x perl/bin/perl -o ! -f .license ] ; then # see if setup was ever run
-   echo "Critical files are missing.  Run setup."
-   exit 2;
-fi
-
-if [ $# -lt 1 ] ; then		# do most recent run
-	# since the directories are time stamps with fixed fields,
-	#  alphabetical order is also time order
-	dir=`ls -d results/[0-9]*.[0-9]* | tail -1`
-else				# use specified run
-	if  [ -d results/$1 ] ; then	#  timestamp
- 	    dir=results/$1
-	    shift
-	elif  [ -d $1 ] ; then	# results/timestamp
- 	    dir=$1
-	    shift
-	fi
-fi
-
-if [ -n "$dir" ] ; then
-	if  [ -f $dir/all.wld ] ; then	# unified workload file
-		perl/bin/perl -Ibin -- bin/process.pl -w $dir/all.wld "$@"
-	else			# BACK COMPATIBILITY form
-		perl/bin/perl -Ibin -- bin/process.pl -c $dir/config.cfg "$@"
-	fi
-else				# pass in whatever they gave us
-	perl/bin/perl -Ibin -- bin/process.pl "$@"
-fi

mozilla/mstone/bin/process.pl

@@ -1,371 +0,0 @@
-#!/usr/bin/env perl
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# Generate reports independently of mailmaster
-# Can be used during a run or after mailmaster has finished
-
-print "Netscape Mailstone\n";
-print "Copyright (c) 1997-2000 Netscape Communications Corp.\n";
-
-# this parses the command line and config file
-do 'args.pl'|| die $@;
-parseArgs();			# parse command line
-setConfigDefaults();		# pick up any missing defaults
-
-$resultdir = "$resultbase/$params{TSTAMP}";
-$tmpdir = "$tmpbase/$params{TSTAMP}";
-$resultstxt = "$resultdir/results.txt";
-$resultshtml = "$resultdir/results.html";
-
-if ($params{TESTBED}) {		# BACK COMPATIBILITY
-    $params{TESTBED} = "$resultdir/testbed.tbd"; # use saved testbed
-    # open the saved testbed conf file
-    readTestbedFile($params{TESTBED}) || die "$@\n";
-}
-
-# Convert old style to new.  Write the complete inclusive workload
-writeWorkloadFile ("$resultdir/all.wld", \@workload)
-    unless ((-r "$resultdir/all.wld") || (-r "$resultdir/all.wld.gz"));
-
-$testsecs = figureTimeSeconds ($params{TIME}, "minutes");
-
-print "Starting data reduction\n";
-
-sub readClientCSV {
-    my $file = shift;
-    my @fields;
-    my $line;
-
-    print "Reading client summary: $file\n";
-    open(CSV, "<$file")	||	# Summary of all clients
-	open(CSV, "gunzip -c $file.gz |") || 
-	    return 0;		# failed
-
-    # Title line: Verify that arguments are in the same order
-    $line = <CSV>;
-    unless ($line) {
-	print "readClientCSV: Error reading $file. \n";
-	return 0;
-    }
-    chomp $line;		# strip newline
-    @fields = split /,/, $line; # turn into an array
-    my $cli = shift @fields;	# pull off client header
-    my $cn = shift @fields;	# pull off num header
-    my $pro = shift @fields;	# pull off protocol header
-
-    # Client array, per variable, per protocol
-    foreach $p (@protocols) {
-	# This hash will hold the timers
-	$clidata{$p} = ArrayInstance->new();
-	foreach $t (@timers) {
-	    # This hash will hold the values in the timer
-	    $clidata{$p}->{$t} = ArrayInstance->new();
-	    foreach $f (@{$timerFields{$t}}) {
-		# This hash that will hold the actual values per client
-		$clidata{$p}->{$t}->{$f} = ArrayInstance->new();
-	    }
-	}
-	foreach $t (@scalarClientFields) { # non-timer fields
-	    # This hash that will hold the actual values per client
-	    $clidata{$p}->{$t} = ArrayInstance->new();
-	}
-    }
-
-    foreach $f (@commClientFields) { # proto independent
-	my $v = shift @fields;
-	if ($v !~ m/$f/i) {
-	    print "readClientCSV: Protocol order mismatch '$v', '$f' \n";
-	    return 0;
-	}
-    }
-    foreach $t (@timers) {	# timers
-	foreach $f (@{$timerFields{$t}}) {
-	    my $v = shift @fields;
-	    if ($v !~ m/$t:$f/i) {
-		print "readClientCSV: Protocol order mismatch '$v', '$t:$f' \n";
-		return 0;
-	    }
-	}
-    }
-    foreach $t (@scalarClientFields) { # scalars
-	my $v = shift @fields;
-	if ($v !~ m/$t/i) {
-	    print "readClientCSV: Protocol order mismatch '$v', '$t' \n";
-	    return 0;
-	}
-    }
-
-    # Now read actual data
-    while (<CSV>) {
-	chomp;			# strip newline
-	@fields = split /,/;	# turn into an array
-	my $cli = shift @fields; # pull off client header
-	my $cn = shift @fields;	# pull off num header
-	my $p = shift @fields;	# pull off protocol header
-	my $cp = $clidata{$p};
-
-	# Create the needed finals arrays
-	unless ($finals{$p}) {
-	    #print "Creating finals{$p}\n"; # DEBUG
-	    $finals{$p} = ArrayInstance->new();
-	    foreach $t (@timers) {
-		$finals{$p}->{$t} = ArrayInstance->new();
-	    }
-	}
-
-	foreach $f (@commClientFields) { # proto independent
-	    $cliGen{$f}->{$cn} = shift @fields;
-	}
-	foreach $t (@timers) {	# timers
-	    foreach $f (@{$timerFields{$t}}) {
-		$cp->{$t}->{$f}->{$cn} = shift @fields;
-		$finals{$p}->{$t}->{$f} += $cp->{$t}->{$f}->{$cn};
-	    }
-	}
-	foreach $t (@scalarClientFields) { # scalars
-	    $cp->{$t}->{$cn} = shift @fields;
-	    $finals{$p}->{$t} += $cp->{$t}->{$cn};
-	}
-
-	foreach $section (@workload) { # find thread count for this client
-	    next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	    next unless ($section->{sectionParams} =~ /$cli/);
-	    #print "Process $cli has threads $section->{THREADS}\n";
-	    $reportingClients += ($section->{THREADS})
-		? $section->{THREADS} : 1;
-	    last;
-	}
-    }
-
-    close (CSV);
-    return 1;			# success
-}
-
-sub readTimeCSV {
-    my $file = shift;
-    my $p = shift;
-    my $gp = $graphs{$p};
-    my $line;
-
-    print "Reading time $p summary: $file\n";
-    open(CSV, "<$file")	||	# Summary over time
-	open(CSV, "gunzip -c $file.gz |") || 
-	    return 0;		# failed
-
-    # Verify that arguments are in the same order
-    $line = <CSV>;
-    unless ($line) {
-	print "readTimeCSV: Error reading $file. \n";
-	return 0;
-    }
-    chomp $line;		# strip newline
-    @fields = split /,/, $line;
-    my $t = shift @fields;	# pull off time header
-    foreach $t (@timers) {
-	foreach $f (@{$timerFields{$t}}) {
-	    my $v = shift @fields;
-	    if ($v !~ m/$t:$f/i) {
-		print "readTimeCSV: Protocol order mismatch '$v', '$t:$f' \n";
-		return 0;
-	    }
-	}
-    }
-    foreach $t (@scalarGraphFields) {
-	my $v = shift @fields;
-	if ($v !~ m/$t/i) {
-	    print "readTimeCSV: Protocol order mismatch '$v', '$t' \n";
-	    return 0;
-	}
-    }
-    while (<CSV>) {
-	chomp;
-	#print "LINE: $_\n";
-	@fields = split /,/;
-	my $tm = shift @fields;	# pull off time header
-	#print "t=$t ";
-	foreach $t (@timers) {
-	    foreach $f (@{$timerFields{$t}}) {
-		$gp->{$t}->{$f}->{$tm} = shift @fields;
-		#print "$v=$gp->{$v}->{$tm} ";
-	    }
-	}
-	foreach $t (@scalarGraphFields) {
-	    $gp->{$t}->{$tm} = shift @fields;
-	    #print "$v=$gp->{$v}->{$tm} ";
-	}
-	#print "\n";
-    }
-    close (CSV);
-    return 1;			# success
-}
-
-sub loadCSV {
-    my @csvs = <$resultdir/time-*.csv>;
-    @csvs = <$resultdir/time-*.csv.gz> unless (@csvs);
-    return 0 unless (@csvs);	# no time.csv files
-
-    # stuff normally done from reduce.pl (should all be in protoconf?)
-    # Basic sanity check
-    return 0 unless ($testsecs > 0);
-
-    $startTime = 0;			# these are timeInSeconds/$timeStep
-    $endTime = 0;
-
-    # keep graphs with somewhat more precision than sample rate;
-    $timeStep = int ($params{FREQUENCY} / 2);
-    if ($timeStep < 1) { $timeStep = 1; }
-
-    # global results initialization
-    $reportingClients = 0;
-    $totalProcs = 0;		# number of clients started
-
-    foreach $f (@commClientFields) { # protocol independent fields
-	$cliGen{$f} = ArrayInstance->new();
-    }
-
-    return 0 unless (readClientCSV ("$resultdir/clients.csv")); # client info
-
-    foreach $c (@csvs) { # read time info
-	$c =~ s/.gz$//;		# strip .gz extension
-	my $p = $c;		# strip down to protocol portion
-	$p =~ s/$resultdir\/time-//;
-	$p =~ s/.csv$//;
-	return 0 unless (readTimeCSV ($c, $p));
-    }
-
-    return 0 unless ($reportingClients > 0);
-
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my @hlist = split /[\s,]/, $slist;
-	my $hcnt = (1 + $#hlist);
-	my $pcount = $section->{PROCESSES};
-	my $tcount = ($section->{THREADS}) ? $section->{THREADS} : 1;
-
-	$totalProcs += $pcount * $tcount * $hcnt;
-    }
-
-    # Find time extent for a key graph
-    ($startTime, $endTime) = dataMinMax ("blocks", \@protocols,
-					 $startTime, $endTime);
-
-    $realTestSecs = ($endTime - $startTime) * $timeStep;
-    $realTestSecs = 1 unless ($realTestSecs); # in case of small MaxBlocks
-    printf "Reported test duration %d seconds with %d second resolution\n",
-    $realTestSecs, $timeStep;
-    $realTestSecs = $testsecs if ($realTestSecs > $testsecs);
-
-    my @newProtos;	# figure real protocol list
-    foreach $p (@protocols) {
-	my $gp = $graphs{$p};
-	my $numValid = 0;
-	# See if there is real data here
-	CHECKVAL: foreach $t (@timers) {
-	    foreach $f (@{$timerFields{$t}}) {
-		my $vp = $gp->{$t}->{$f};
-		next unless ($vp);	# no data
-		next unless (scalar %$vp); # redundant???
-
-		#print "Checking: $p $t $f => ENTRIES\n";
-		$numValid++;
-		last CHECKVAL;
-	    }
-	}
-	($numValid > 0) || next;
-
-	push @newProtos, $p;
-    }
-    # update protocol list to only have what was used
-    @protocols = @newProtos;
-    @protocolsAll = @newProtos;
-    push @protocolsAll, "Total";
-}
-
-
-my $doFull = 1;			# re-processing is currently broken
-
-#  if (!((-f "$resultdir/clients.csv")
-#        || (-f "$resultdir/clients.csv.gz"))) { # no processing yet
-#      $doFull = 1;
-#  } else {			# see if any source is newer than csv
-#      foreach $section (@workload) {
-#  	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-#  	my $slist = $section->{sectionParams};
-#  	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-#  	foreach $cli (split /[\s,]/, $slist) {
-#  	    my $fname = getClientFilename ($cli, $section);
-#  	    if ((-r $fname)	# raw source exists
-#  		&& ((-M "$resultdir/clients.csv")
-#  		    > (-M $fname))) { # newer
-#  		#print "$fname is newer than $resultdir/clients.csv\n";
-#  		$doFull++;
-#  		last;
-#  	    }
-#  	}
-#      }
-#  }
-
-#  unless ($doFull) {		# do CSV load
-#      # if this is a csv only run, then these may not exist yet
-#      mkdir ("$tmpbase", 0775);
-#      mkdir ("$tmpdir", 0775);
-#      unless (-r "$resultbase/index.html") {
-#  	do 'makeindex.pl' || warn "$@\n";	# html index
-#      }
-
-#      $doFull = 1 unless (loadCSV); # if CSV fails, fall back to full processing
-#  }
-
-if ($doFull) {
-    do 'reduce.pl' || die "$@\n";
-}
-
-
-print "Generating results pages:\t", scalar (localtime), "\n";
-
-do 'report.pl' || die "$@\n";
-
-# Now display that data to console
-if ($params{VERBOSE}) {
-    fileShow ($resultstxt);
-    print "\n";
-}
-
-pathprint ("\nResults (text):\t$resultstxt\n");
-pathprint (  "Results (HTML):\t$resultshtml\n");
-print        "Index of runs: \tfile://$cwd/$resultbase/index.html\n";
-
-print "Process done:\t", scalar (localtime), "\n";

mozilla/mstone/bin/protoconf.pl

@@ -1,158 +0,0 @@
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# This define the structures that hold summary, client, and graph data,
-
-# This sets the names used for display.  Can be internationalized.
-# All top level names are here (both timers and scalars).
-# Any unlisted names will map to themselves.
-%timerNames
-    = (
-       #internal name,	Printed name
-       "total",		"total",
-       "conn",		"connect",
-       "reconn",	"reconnect",
-       "banner",	"banner",
-       "login",		"login",
-       "cmd",		"command",
-       "submit",	"submit",
-       "retrieve",	"retrieve",
-       "logout",	"logout",
-       "idle",		"idle",
-       "connections",	"connections",
-       "blocks",	"blocks",
-       );
-
-# This sets the names used for display.  Can be internationalized.
-%fieldNames
-    = (
-       #internal name,	Printed name
-       "Try",		"Try",
-       "Error",		"Error",
-       "BytesR",	"BytesR",
-       "BytesW",	"BytesW",
-       "Time",		"Time",
-       "TimeMin",	"TMin",
-       "TimeMax",	"TMax",
-       "Time2",		"TStd",
-       );
-
-
-# hold time graphs for each protocol
-%graphs = ();
-
-# Totals are done during plotting, if needed
-%finals = ();			# create base finals hash
-
-# These are sections that dont get passed to mailclient (case insensitive)
-@scriptWorkloadSections
-    = (
-       "Config",		# special, references %params
-       "Client",		# testbed client(s)
-       "Graph",			# graph generation
-       "Setup",			# things to run with ./setup
-       "Startup",		# things to run before test
-       "Monitor",		# other performance monitoring
-       "PreTest",		# things to run before test
-       "PostTest",		# things to run after test
-       );
-
-# These are sections that arent protocols.  Anything else must be.
-@nonProtocolSections
-    = (@scriptWorkloadSections, ("Default"));
-
-# These are the known workload parameters (as they will print)
-# These are coerced to upper case internally (do NOT internationize)
-@workloadParameters
-    = (
-       "addressFormat",
-       "arch",
-       "blockID",
-       "blockTime",
-       "chartHeight",
-       "chartPoints",
-       "chartWidth",
-       "clientCount",
-       "command",
-       "comments",
-       "file",
-       "firstAddress",
-       "firstLogin",
-       "frequency",
-       "gnuplot",
-       "group",
-       "idleTime",
-       "leaveMailOnServer",
-       "loginFormat",
-       "loopDelay",
-       "numAddresses",
-       "numLogins",
-       "numLoops",
-       "numRecips",
-       "mailClient",
-       "maxBlocks",
-       "maxClients",
-       "maxErrors",
-       "maxThreads",
-       "maxProcesses",
-       "passwdFormat",
-       "processes",
-       "rampTime",
-       "rcp",
-       "rsh",
-       "sequentialAddresses",
-       "sequentialLogins",
-       "server",
-       "smtpMailFrom",
-       "sysConfig",
-       "threads",
-       "telemetry",
-       "tempDir",
-       "time",
-       "title",
-       "TStamp",
-       "useAuthLogin",
-       "useEHLO",
-       "weight",
-       "wmapBannerCmds",
-       "wmapClientHeader",
-       "wmapInBoxCmds",
-       "wmapLoginCmd",
-       "wmapLoginData",
-       "wmapLogoutCmds",
-       "wmapMsgReadCmds",
-       "wmapMsgWriteCmds",
-       "workload",
-       );
-       
-return 1;

mozilla/mstone/bin/report.pl

@@ -1,605 +0,0 @@
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# This file deals with the summary data only
-
-# Should be packages
-do 'genplot.pl' || die "$@\n";
-
-sub walkSetupTotals {
-    my $a = shift; my $f = shift; my $p = shift;
-    if ($p =~ /(\w+):(\w+):$/) {
-	my $tm = $2;
-	if (!($finals{Total}->{$tm}->{$f})) {
-	    $finals{Total}->{$tm}->{$f} = $a;
-	} elsif ($f =~ /Min$/) {
-	    $finals{Total}->{$tm}->{$f} = $a
-		if (($a > 0.0) && ($a < $finals{Total}->{$tm}->{$f}));
-	} elsif ($f =~ /Max$/) {
-	    $finals{Total}->{$tm}->{$f} = $a if ($a > $finals{Total}->{$tm}->{$f});
-	} else {
-	    $finals{Total}->{$tm}->{$f} += $a;}
-    }
-    elsif ($p =~ /(\w+):$/) {
-	$finals{Total}->{$f} += $a;
-    }
-}
-
-sub setupTotals {
-    # Figure out combined timers for "Total" protocol
-    # We might do a smarter merge here (look at context and try to match order)
-    # As long as the first protocol is a superset, it wont matter
-    my @tnames;
-    foreach $proto (@protocols) {
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;
-	    $t =~ s/([][{}*+?^.\/])/\\$1/g; # quote regex syntax
-	    my $found = 0;
-	    foreach $tn (@tnames) { # see if it is in the list already
-		next unless ($tn =~ /$t/);
-		$found = 1;
-		last;
-	    }
-	    #print "proto $proto: Found $n\n" if ($found > 0);
-	    next if ($found > 0);
-	    #print "proto $proto: Add $n\n";
-	    push @tnames, $n;	# add to list
-	}
-    }
-    #print "'Total' timers @tnames\n";
-    $protocolFields{"Total"} = \@tnames;
-
-    # Create "Total" hashes
-    $finals{Total} =  ArrayInstance->new();
-    foreach $n (@{$protocolFields{"Total"}}) { # all timers
-	my $t = $n;	# dont modify original list
-	if ($t =~ /^\[(\w+)\]$/) { # Timer case, strip off brackets
-	    $finals{Total}->{$1} = ArrayInstance->new();
-	    #print "Creating Total timer field $1\n";
-	} else {		# scalar
-	    $finals{Total}->{$n} = 0;
-	    #print "Creating Total scalar field $n\n";
-	}
-    }
-
-    # Total finals array
-    foreach $proto (@protocols) {
-	foreach $t (@{$protocolFields{$proto}}) {
-	    if ($t =~ /^\[(\w+)\]$/) { # Timer case, strip off brackets
-		my $tm = $1;
-		foreach $f (@timerFieldsAll) {
-		    my $a = $finals{$proto}->{$tm}->{$f};
-		    if (!($finals{Total}->{$tm}->{$f})) { # never touched
-			$finals{Total}->{$tm}->{$f} = $a;
-		    } elsif ($f =~ /Min$/) {
-			$finals{Total}->{$tm}->{$f} = $a
-			    if (($a > 0.0)
-				&& ($a < $finals{Total}->{$tm}->{$f}));
-		    } elsif ($f =~ /Max$/) {
-			$finals{Total}->{$tm}->{$f} = $a
-			    if ($a > $finals{Total}->{$tm}->{$f});
-		    } else {
-			$finals{Total}->{$tm}->{$f} += $a;
-		    }
-		}
-	    } else {
-		$finals{Total}->{$t} += $finals{$proto}->{$t};
-	    }
-	}
-    }    
-		    
-    # Convert Time2 to standard deviation
-    foreach $proto (@protocolsAll) {
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;	# dont modify original list
-	    if ($t =~ /^\[(\w+)\]$/) { $t = $1; } # strip off brackets
-	    next unless ($finals{$proto}->{$t}); # proto doesnt have timer
-	    next unless ($finals{$proto}->{$t}->{Try});
-	    next unless ($finals{$proto}->{$t}->{Time2} > 0);
-	    my $ss = $finals{$proto}->{$t}->{Time2};
-	    my $tot = $finals{$proto}->{$t}->{Time};
-	    my $n = $finals{$proto}->{$t}->{Try};
-	    next unless ($n > 0); # skip if this is 0
-
-	    my $var = ($ss - (($tot * $tot) / $n)) / $n;
-	    print "$proto->$t var < 0: Time2=$ss Time=$tot n=$n\n"
-		if ($var < 0);
-	    $finals{$proto}->{$t}->{Time2} = ($var > 0) ? sqrt ($var) : 0.0;
-	}
-    }
-
-    # Divide total times by trys to get averate time
-    foreach $proto (@protocolsAll) {
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;	# dont modify original list
-	    if ($t =~ /^\[(\w+)\]$/) { $t = $1; } # strip off brackets
-	    next unless ($finals{$proto}->{$t}); # proto doesnt have timer
-	    ($finals{$proto}->{$t}->{Try}) || next;
-	    $finals{$proto}->{$t}->{Time} /= $finals{$proto}->{$t}->{Try}
-	}
-    }
-}
-
-# The text version is designed to be machine processable
-# commify and kformat are not used
-sub genTextReport {
-    fileBackup ($resultstxt);	# if processing as we go, backup old file
-    # Open a text file to hold the results
-    open(RESULTSTXT, ">$resultstxt") || 
-	die "Couldn't open $resultstxt: $!";
-
-    # Store results as text
-    printf RESULTSTXT "---- Mozilla MailStone Results $params{TSTAMP} ----\n";
-
-    printf RESULTSTXT "\t\t%s\n", $params{TITLE};
-    printf RESULTSTXT "\t\t%s\n", $params{COMMENTS};
-    printf RESULTSTXT "\n";
-    printf RESULTSTXT "Test duration: %d %s.  Rampup: %d %s.  Reported duration %s seconds\n",
-    figureTimeNumber ($params{TIME}),
-    figureTimeUnits ($params{TIME}, "minutes"),
-    figureTimeNumber ($params{RAMPTIME}),
-    figureTimeUnits ($params{RAMPTIME}, "seconds"), $realTestSecs;
-    printf RESULTSTXT "Number of reporting clients: %s of %s\n",
-    $reportingClients, $totalProcs;
-
-    foreach $proto (@protocolsAll) {
-	# do op counters
-	printf RESULTSTXT "\n%-15s  ", $proto;
-	foreach $f (@timerFieldsAll) {
-	    #($f =~ m/^Time2$/o) && next;
-	    printf RESULTSTXT "%13s",
-	    ($fieldNames{$f}) ? $fieldNames{$f} : $f;
-	}
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;	# dont modify original list
-	    unless ($t =~ /^\[(\w+)\]$/) { # scalar case
-		#next;		# skip scalars for now
-		# do scalar counters. Column should line up with "Try"
-		printf RESULTSTXT "\n%-15s  ",
-		$proto . ":" . (($timerNames{$t}) ? $timerNames{$t} : $t);
-		printf RESULTSTXT
-		    "%13s", $finals{$proto}->{$t};
-		next;
-	    } else {		# strip off brackets
-		$t = $1;
-	    }
-	    printf RESULTSTXT "\n%-15s  ",
-	    $proto . ":" . (($timerNames{$t}) ? $timerNames{$t} : $t);
-	    foreach $f (@timerFieldsAll) {
-		#($f =~ m/^Time2$/o) && next;
-		if ($f =~ m/Time/o) {
-		    printf RESULTSTXT
-			"%13.3f", $finals{$proto}->{$t}->{$f};
-		} elsif ($f =~ m/Bytes/o) {
-		    printf RESULTSTXT
-			"%13d", $finals{$proto}->{$t}->{$f};
-		} else {
-		    printf RESULTSTXT
-			"%13s", $finals{$proto}->{$t}->{$f};
-		}
-	    }
-	}
-
-	# do ops/sec
-	printf RESULTSTXT "\n\n%-15s  ", $proto;
-	foreach $f (@timerFieldsAll) {
-	    ($f =~ m/^Time/o) && next;
-	    printf RESULTSTXT "%9s/sec", 
-	    ($fieldNames{$f}) ? $fieldNames{$f} : $f;
-	}
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;	# dont modify original list
-	    unless ($t =~ /^\[(\w+)\]$/) { # scalar case
-		#next;		# skip scalars for now
-		# do scalar counter/sec. Column should line up with "Try"
-		printf RESULTSTXT "\n%-15s  ",
-		$proto . ":" . (($timerNames{$t}) ? $timerNames{$t} : $t) . "/s";
-		printf RESULTSTXT
-		    "%13.3f", $finals{$proto}->{$t} / $realTestSecs;
-		next;
-	    } else {
-		$t = $1;
-	    }
-	    printf RESULTSTXT "\n%-15s  ",
-	    $proto . ":" . (($timerNames{$t}) ? $timerNames{$t} : $t) . "/s";
-	    foreach $f (@timerFieldsAll) {
-		($f =~ m/^Time/o) && next;
-		if ($f =~ m/Bytes/o) {
-		    printf RESULTSTXT
-			"%13d",
-			$finals{$proto}->{$t}->{$f} / $realTestSecs;
-		} else {
-		    printf RESULTSTXT
-			"%13.3f",
-			$finals{$proto}->{$t}->{$f} / $realTestSecs;
-		}
-	    }
-	}
-	printf RESULTSTXT "\n\n";
-    }
-
-    if ($params{SYSCONFIG}) {
-	print RESULTSTXT "\nSytem config details\n";
-	if (($params{SYSCONFIG} =~ m/^\S+$/o)
-	    && (open(SCFILE, "<$params{SYSCONFIG}"))) {
-	    while (<SCFILE>) {
-		(m/^<\S+>\s*$/o) && next; # skip HTML only on them
-		s/<\S+>//g;	# trim out obvious HTML commands
-		s/<!--.*-->//g;	# trim out HTML comments
-		print RESULTSTXT $_;
-	    }
-	    close(SCFILE);
-	} else {
-	    my $l = $params{SYSCONFIG};	# filter similar to above
-	    $l =~ s/<\S+>//g;	# trim out obvious HTML commands
-	    $l =~ s/<!--.*-->//g; # trim out HTML comments
-	    $l =~ s/\\\n/\n/g;	# turn quoted newline to plain newline
-	    print RESULTSTXT $l;
-	}
-    }
-
-    close(RESULTSTXT);
-}
-
-# Write the main part of the HTML page
-sub genHTMLReportStart {
-    fileBackup ($resultshtml);	# if processing as we go, backup old file
-    # Open an html file to hold the results
-    open(RESULTSHTML, ">$resultshtml") || 
-	die "Couldn't open $resultshtml: $!";
-
-    print RESULTSHTML <<END;
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
-<HTML>
-<A NAME=TitleSection>
-<TITLE>
-Mozilla MailStone Results $params{TSTAMP}
-</TITLE>
-</A>
-<HEAD>
-</HEAD>
-<BODY TEXT="#000000" BGCOLOR="#FFFFFF" LINK="#0000FF" VLINK="#FF0000" ALINK="#000088">
-<CENTER>
-<HR NOSHADE WIDTH="100%">
-<H1>Mozilla MailStone Results $params{TSTAMP}</H1>
-<H2>$params{TITLE}</H2>
-<I>$params{COMMENTS}</I>
-<HR WIDTH="100%">
-</CENTER>
-
-END
-    printf RESULTSHTML "<BR><B>Test duration:</B> %d %s.  ",
-    figureTimeNumber ($params{TIME}),
-    figureTimeUnits ($params{TIME}, "minutes");
-    printf RESULTSHTML "<B>Rampup:</B> %d %s.  ",
-    figureTimeNumber ($params{RAMPTIME}),
-    figureTimeUnits ($params{RAMPTIME}, "seconds");
-    printf RESULTSHTML "<B>Reported duration:</B> %s seconds\n",
-    commify ($realTestSecs);
-
-    printf RESULTSHTML "<BR><B>Reporting clients:</B> %s of %s\n",
-    commify ($reportingClients), commify ($totalProcs);
-
-    print RESULTSHTML <<END;
-<BR>
-Test <A HREF="all.wld">complete workload</a> description.  
-Filtered <A HREF="work.wld">workload</a> description.
-<BR>
-Plain <A HREF="results.txt">text version</a> of results.  
-Log of <A HREF="stderr">stderr</a> and debugging output.
-<BR>
-
-<A NAME=MonitoringSection></A>
-END
-
-    {				# list user requested logging
-	my @logfiles = <$resultdir/*-pre.log>;
-	if (@logfiles) {
-	    foreach $f (@logfiles) {
-		$f =~ s/$resultdir\///o; # strip directory out
-		$f =~ s/-pre\.log$//o; # strip extension off
-		print RESULTSHTML "Pre test log: <A HREF=\"$f-pre.log\">$f</a><BR>\n";
-	    }
-	}
-	@logfiles = <$resultdir/*-run.log>;
-	if (@logfiles) {
-	    foreach $f (@logfiles) {
-		$f =~ s/$resultdir\///o; # strip directory out
-		$f =~ s/-run\.log$//o; # strip extension off
-		print RESULTSHTML "Monitoring log: <A HREF=\"$f-run.log\">$f</a><BR>\n";
-	    }
-	}
-	@logfiles = <$resultdir/*-post.log>;
-	if (@logfiles) {
-	    foreach $f (@logfiles) {
-		$f =~ s/$resultdir\///o; # strip directory out
-		$f =~ s/-post\.log$//o; # strip extension off
-		print RESULTSHTML "Post test log: <A HREF=\"$f-post.log\">$f</a><BR>\n";
-	    }
-	}
-    }
-
-    #print RESULTSHTML
-	#"<CENTER><H2>Results per protocol</H2></CENTER>\n";
-
-    foreach $proto (@protocolsAll) {
-	printf RESULTSHTML "<A NAME=%sTable></A>\n", $proto;
-	printf RESULTSHTML
-	    "<TABLE BORDER=2 CELLSPACING=2 CELLPADDING=2 COLS=%d WIDTH=\"95%%\">",
-	    2+$#{@{$protocolFields{$proto}}};
-	print RESULTSHTML
-	    "<CAPTION>$proto Counters</CAPTION>\n";
-	# do op counters
-	print RESULTSHTML
-	    "<TR><TH>$proto</TH>\n";
-	foreach $f (@timerFieldsAll) {
-	    #($f =~ m/^Time2$/o) && next;
-	    printf RESULTSHTML "<TH>%s</TH> ",
-	    ($fieldNames{$f}) ? $fieldNames{$f} : $f;
-	}
-	print RESULTSHTML
-	    "</TR>\n";
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;	# dont modify original list
-	    unless ($t =~ /^\[(\w+)\]$/) { # scalar case
-		next;		# skip scalars for now
-		# do scalar counters. Column should line up with "Try"
-		printf RESULTSHTML "<TR ALIGN=RIGHT><TH>%s</TH>\n",
-		($timerNames{$t}) ? $timerNames{$t} : $t;
-		printf RESULTSHTML
-		    "<TD>%s</TD> ",
-		    commify ($finals{$proto}->{$t});
-		next;
-	    } else {
-		$t = $1;
-	    }
-	    printf RESULTSHTML "<TR ALIGN=RIGHT><TH>%s</TH>\n",
-	    ($timerNames{$t}) ? $timerNames{$t} : $t;
-	    foreach $f (@timerFieldsAll) {
-		#($f =~ m/^Time2$/o) && next;
-		if ($f =~ m/Time/o) {
-		    printf RESULTSHTML
-			"<TD>%s</TD> ",
-			tformat ($finals{$proto}->{$t}->{$f});
-		} elsif ($f =~ m/Bytes/o) {
-		    printf RESULTSHTML
-			"<TD>%s</TD> ",
-			kformat ($finals{$proto}->{$t}->{$f});
-		} else {
-		    printf RESULTSHTML
-			"<TD>%s</TD> ",
-			commify ($finals{$proto}->{$t}->{$f});
-		}
-	    }
-	    print RESULTSHTML "</TR>\n";
-	}
-
-	# do ops/sec
-	print RESULTSHTML
-	    "<TR><TH>$proto</TH>\n";
-	foreach $f (@timerFieldsAll) {
-	    ($f =~ m/^Time/o) && next;
-	    printf RESULTSHTML "<TH>%s/sec</TH> ",
-	    ($fieldNames{$f}) ? $fieldNames{$f} : $f;
-	}
-	print RESULTSHTML
-	    "</TR>\n";
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;	# dont modify original list
-	    unless ($t =~ /^\[(\w+)\]$/) { # scalar case
-		next;		# skip scalars for now
-		# do scalar counters. Column should line up with "Try"
-		printf RESULTSHTML "<TR ALIGN=RIGHT><TH>%s</TH>\n",
-		($timerNames{$t}) ? $timerNames{$t} : $t;
-		printf RESULTSHTML
-		    "<TD>%.3f</TD> ",
-		    $finals{$proto}->{$t} / $realTestSecs;
-		next;
-	    } else {
-		$t = $1;
-	    }
-	    printf RESULTSHTML "<TR ALIGN=RIGHT><TH>%s</TH>\n",
-	    ($timerNames{$t}) ? $timerNames{$t} : $t;
-	    foreach $f (@timerFieldsAll) {
-		($f =~ m/^Time/o) && next;
-		if ($f =~ m/Bytes/o) {
-		    printf RESULTSHTML
-			"<TD>%s</TD> ",
-			kformat ($finals{$proto}->{$t}->{$f} / $realTestSecs);
-		} else {
-		    printf RESULTSHTML
-			"<TD>%.3f</TD> ",
-			$finals{$proto}->{$t}->{$f} / $realTestSecs;
-		}
-	    }
-	    print RESULTSHTML "</TR>\n";
-	}
-	printf RESULTSHTML "</TABLE> <BR>\n\n";
-    }
-
-    print RESULTSHTML <<END;
-
-<BR>
-
-<CENTER>
-<A NAME=GraphSection></A>
-END
-}
-
-%genplotGraphs = ();
-
-# Call genplot; and, if a graph is generated, insert the HTML reference to it
-sub genHTMLReportGraph {
-    my $name = shift;
-    my $title = shift;
-    my $label = shift;
-    my $protos = shift || die "genHTMLReportGraph: '$name' missing protocols";
-    my $field = shift;
-    my $vars = shift || die "genHTMLReportGraph: '$name' missing vars";
-
-    if ($genplotGraphs{$name}) {
-	print "Graph $name has already been generated.\n";
-	return;
-    }
-
-    $genplotGraphs{$name} = $title;
-
-    # Delineate and tag each graph
-    print RESULTSHTML "<A NAME=$name><HR SIZE=4 WIDTH=\"90%\"></A>\n";
-    if (genPlot ($name, $title, $label, $protos, $field, $vars) > 0) {
-	print RESULTSHTML <<END;
-<P><H3>$title</H3>
-<IMG SRC=$name.$params{IMAGETYPE} ALT="$label"></P>
-END
-    } else {
-	print RESULTSHTML "<BR>Graph \"$name\" contained no data (@{$vars}).<BR>\n";
-    }
-	
-}
-
-# Write the final parts of the HTML page
-sub genHTMLReportEnd {
-    print RESULTSHTML <<END;
-<!-- INSERT IMAGES HERE - DO NOT DELETE THIS LINE -->
-</CENTER>
-<A NAME=EndSection></A>
-END
-
-    if ($params{SYSCONFIG}) {
-	print RESULTSHTML "<HR WIDTH=\"100%\">";
-	print RESULTSHTML "<CENTER><H2>Details</H2></CENTER>\n";
-	if (($params{SYSCONFIG} =~ m/^\S+$/o)
-	    && (open(SCFILE, "<$params{SYSCONFIG}"))) { # see if its a file
-	    while (<SCFILE>) {
-		print RESULTSHTML $_;
-	    }
-	    close(SCFILE);
-	} else {		# output text directly
-	    my $l = $params{SYSCONFIG};
-	    $l =~ s/\\\n/\n/g;	# turn quoted newline to plain newline
-	    print RESULTSHTML $l;
-	}
-    }
-
-    print RESULTSHTML <<END;
-
-<HR NOSHADE WIDTH="100%">
-
-</BODY>
-</HTML>
-END
-    close(RESULTSHTML);
-}
-
-
-# Actually generate the standard stuff
-setupTotals();
-genTextReport();
-
-
-genHTMLReportStart();
-
-my $graphCount = 0;
-foreach $section (@workload) {
-    next unless ($section->{sectionTitle} =~ /GRAPH/i);
-    my $name = $section->{sectionParams};
-    $name =~ s/name=\s*//;	# strip off initial bit
-    my @varlist = split (/[\s,]+/, $section->{VARIABLES});
-
-    $graphCount++;
-    genHTMLReportGraph ($name, $section->{TITLE}, $section->{LABEL}, 
-			($section->{FIELD} =~ /Time/o)
-			? \@protocols : \@protocolsAll,
-			$section->{FIELD}, \@varlist);
-}
-
-if ($graphCount <= 0) {		# use built ins
-
-# generate the graphs we want
-# NOTE: the first argument (name), must be unique; sets file name
-    genHTMLReportGraph ("connects",
-			"Number of connections attempted", "Connections/sec",
-			\@protocolsAll, "Try", ["conn" ]);
-    genHTMLReportGraph ("connections",
-			"Total connections", "Connections",
-			\@protocolsAll, "", ["connections" ]);
-    genHTMLReportGraph ("errors",
-			"Number of connection errors", "Errors/sec",
-			\@protocolsAll, "Error", ["conn", "banner", "login", "logout" ]);
-    genHTMLReportGraph ("retrieves",
-			"Number of messages read", "Messages/sec",
-			\@protocolsAll, "Try", ["retrieve" ]);
-    genHTMLReportGraph ("submits",
-			"Number of messages written", "Messages/sec",
-			\@protocolsAll, "Try", ["submit" ]);
-    genHTMLReportGraph ("commands",
-			"Protocol commands", "Commands/sec",
-			\@protocolsAll, "Try", ["cmd" ]);
-    genHTMLReportGraph ("readBytes",
-			"Bytes read", "Bytes/sec",
-			\@protocolsAll, "BytesR", ["login", "banner", "cmd", "retrieve", "submit", "logout" ]);
-    genHTMLReportGraph ("writeBytes",
-			"Bytes written", "Bytes/sec",
-			\@protocolsAll, "BytesW", ["login", "banner", "cmd", "retrieve", "submit", "logout" ]);
-    genHTMLReportGraph ("msgTime",
-			"Message transfer time", "Seconds per message",
-			\@protocols, "Time", ["cmd", "submit", "retrieve" ]);
-    genHTMLReportGraph ("setupTime",
-			"Connection setup time", "Seconds per connection",
-			\@protocols, "Time", ["conn", "banner", "login" ]);
-    genHTMLReportGraph ("blocks",
-			"Number of mailstone blocks executed", "Blocks/sec",
-			\@protocolsAll, "", ["blocks" ]);
-}
-
-if ($params{ADDGRAPHS}) {	# pick up additional graphs
-    my @graphs = ();
-    readWorkloadFile ($params{ADDGRAPHS}, \@graphs);
-    foreach $section (@graphs) {
-	next unless ($section->{sectionTitle} =~ /GRAPH/i);
-	my $name = $section->{sectionParams};
-	$name =~ s/name=\s*//;	# strip off initial bit
-	my @varlist = split (/[\s,]+/, $section->{VARIABLES});
-
-	$graphCount++;
-	genHTMLReportGraph ($name, $section->{TITLE}, $section->{LABEL}, 
-			    ($section->{FIELD} =~ /Time/o)
-			    ? \@protocols : \@protocolsAll,
-			    $section->{FIELD}, \@varlist);
-    }
-}
-
-
-genHTMLReportEnd();
-
-return 1;

mozilla/mstone/bin/series_utils.ksh

@@ -1,205 +0,0 @@
-#!/bin/ksh
-
-# global configuration parameters.
-# Fill in defaults for anything that is not already set
-
-# Look for testname$test_form, first
-export test_form=${test_form:-""}
-
-# string appended to every description
-export desc_conf=${desc_conf:-""}
-
-# extra arguments common to all tests
-export extra_args=${extra_args:-""}
-
-# error limit to abort sequence
-export error_limit=${error_limit:-100}
-
-# set this to only show what it will do
-export only_show_it=${only_show_it:-0}
-
-# time to allow the server to calm down after each run
-export sleep_time=${sleep_time:-5}
-
-# This is where we store the important runs
-export save_dir=${save_dir:-"results.save"}
-
-# Basic sanity test
-if [[ ! -x /usr/bin/perl || ! -f .license ]] ; then # see if setup was ever run
-   echo "Critical files are missing.  Run setup."
-   exit 2;
-fi
-
-find_timestamp () {		# find the timestamp string from latest run
-  #OLD timestamp=`ls -d results/[0-9]*.[0-9][0-9][0-9][0-9]?(a-z) | tail -1`
-
-  # list all directories with the timestamp pattern
-  timestamp=`echo results/[0-9]*.[0-9][0-9][0-9][0-9]?([a-z])`
-  # strip all but the last one
-  timestamp=${timestamp##* }
-
-  # strip the top directory name out
-  timestamp=${timestamp#results/}
-
-  # return it
-  echo $timestamp
-  return 0
-}
-
-
-# copy last mailstone run from the current directory to good results directory
-save_run () {
-
-  [[ -d $save_dir ]] || \
-	mkdir $save_dir
-
-  [[ $only_show_it -gt 0 ]] && return 0	# dont do anything important
-
-  if [[ -n "$last_timestamp" && -d "results/$last_timestamp/" ]] ; then
-	cp -pR results/$last_timestamp $save_dir/
-	# index probably has lots of extra junk, but its better than nothing
-	cp -pf results/index.html $save_dir/
-  fi
-}
-
-# Display and run a command.  Skip if in only_show mode.
-run () {
-  if [[ $only_show_it -gt 0 ]] ; then
-	echo  "Would run:" "$@"
-	return 0
-  fi
-  echo "Running: " "$@"
-  "$@"
-}
-
-# Sleep.  Skip if in only_show mode.
-run_sleep () {
-  if [[ $only_show_it -gt 0 ]] ; then
-	echo  "Would sleep:" "$@"
-	return 0
-  fi
-  echo "Sleeping: " "$@"
-  sleep "$@"
-}
-# for readability, just use sleep
-alias sleep=run_sleep
-
-
-# This runs the actual mstone run and check for errors
-# compress tmp files
-# Usage: run_test testname description [args...]
-run_test () {
-  testname="$1"; shift;
-  desc="$1"; shift;
-
-  # see if a special version of this test exists
-  if [[ -f conf/$testname$test_form.wld ]] ; then
-	testname=$testname$test_form
-  fi
-
-  #oldtimestamp=`find_timestamp`
-
-  if [[ $only_show_it -gt 0 ]] ; then
-	echo  "Would run:" mstone $testname -b "$desc $desc_conf" $extra_args "$@"
-	if [[ ! -f conf/$testname.wld ]] ; then
-	  echo "Configuration Error: No such test $testname"
-	fi
-	return 0
-  fi
-
-  echo "\n##########################################################"
-  if [[ ! -f conf/$testname.wld ]] ; then
-    echo "CONFIGURATION ERROR: No such test $testname"
-    exit 2
-  fi
-
-  echo  "\nRunning:" mstone $testname -b "$desc $desc_conf" $extra_args "$@"
-  # We actually bypass the mstone script
-  /usr/bin/perl -Ibin -- bin/mailmaster.pl -w conf/$testname.wld  -b "$desc $desc_conf" $extra_args "$@"
-  stat=$?
-
-  # BUG if another test is running at the same time, this is wrong
-  timestamp="`find_timestamp`"
-
-  # test failed to even run
-  if [[ $stat -ne 0 ]]
-  then
-	echo "ABORT! Test failed to start"
-        [[ -n "$mail_list" ]] && \
-	    mail_series "DotCom Failed run: `date`" "$mail_list"
-	exit 2
-  fi
-
-  # compress tmp files.  get the csv files, too.
-  gzip tmp/$timestamp/* results/$timestamp/*.csv
-
-  # stick the timestamp someplace global for a save_run
-  export last_timestamp=$timestamp
-  export all_timestamps="$all_timestamps $timestamp"
-
-  # save the results
-  save_run
-
-  # see how many errors we hit
-  totline=`grep 'Total:total ' results/$timestamp/results.txt`
-
-  # strip label and first field
-  errors=${totline##+([+-z])+( )+([+-9])+( )}
-  # strip trailing fields
-  errors=${errors%% *}
-
-  echo ""			# space things out
-
-  if [[ $errors -gt $error_limit ]] ; then
-	echo "ABORT! Errors ($errors) exceed error limit ($error_limit)"
-        [[ -n "$mail_list" ]] && \
-	    mail_series "DotCom Aborted run: `date`" "$mail_list"
-	exit 1
-  fi
-  echo "Run completed OK ($errors errors).  Timestamp $timestamp"
-
-  sleep $sleep_time
-
-  return 0
-}
-
-# Usage: mail_series subject "address,address,..."
-mail_series () {
-  subject=$1; shift
-  file=/tmp/series$$.tar
-
-  if [[ $only_show_it -gt 0 ]] ; then
-	echo  "Would mail results about $subject" to "$@"
-	return 0
-  fi
-  echo "Mailing results about $subject" to "$@"
-
-  tar cf $file $save_dir/index.html
-  for f in $all_timestamps ; do
-      tar rf $file $save_dir/$f
-  done
-  gzip $file
-  echo "$all_timestamps" | uuenview -b -30000 -s "$subject" -m "$@" $file.gz
-  rm -f $file.gz
-}
-
-# parse command line arguments
-while [[ -n "$1" ]]
-do
-  case $1 in
-  # -n mode, do not execute, just show
-  -n)	only_show_it=1; shift;;
-
-  # set test form
-  -f)	shift; test_form=$1; shift;;
-
-  # set test extra description
-  -d)	shift; desc_conf=$1; shift;;
-
-  # Rest are to be passed in exactly
-  --)	shift; break;;
-
-  #default, pick up as an extra arg
-  *)	extra_args="$extra_args $1"; shift;;
-  esac
-done

mozilla/mstone/bin/setup.pl

@@ -1,464 +0,0 @@
-#!/usr/bin/env perl
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1999-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-#			Jim Salter <jsalter@netscape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# usage: setup.pl setup|cleanup|checktime|timesync -m machine_file
-# message files are expected to be in ./data/ and end with ".msg"
-
-print "Netscape Mailstone.\nCopyright (c) 1997-2000 Netscape Communications Corp.\n";
-
-$mode = shift;			# mode must be first
-
-# this parses the command line for -m machinefile
-# also sets many defaults
-do 'args.pl'|| die $@;
-sub warn_system;
-sub die_system;
-
-parseArgs();			# parse command line
-
-setConfigDefaults();		# setup RSH and RCP
-
-$cpcmd = "cp";			# copy files... dir
-$rmcmd = "rm -f";		# remove files...
-
-die "Must specify workload file" unless (@workload);
-
-# Add or change client machines
-sub configClients {
-    print "\n    You can enter multiple machines like this: host1,host2\n";
-    my @d = <bin/*/bin>;
-    if (@d) {
-	my @d2;
-	foreach (@d2 = @d) { s/^bin\/// }
-	foreach (@d = @d2) { s/\/bin$// }
-	print "    These OS versions are available:\n@d\n";
-    }
-
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my $arch = "default OS";
-	$arch = $section->{ARCH} if ($section->{ARCH});
-	print "\nWhat is the name of the client(s) for $arch [$slist]: ";
-	my $ans = <STDIN>; chomp $ans;
-	if ($ans) {
-	    $ans =~ s/\s//g;	# strip any whitespace
-	    fileReplaceText ($params{WORKLOAD}, "<CLIENT", $slist, $ans);
-	}
-    }
-    while (1) {
-	print "\nWhat additional client(s) [none]: ";
-	my $ans = <STDIN>; chomp $ans;
-	last unless ($ans);	# done
-	last if ($ans =~ /^none$/i);
-	$ans =~ s/\s//g;	# strip any whitespace
-	my $block = "\n<CLIENT HOSTS=$ans>\n";
-
-	print "What OS type [default]: ";
-	my $ans = <STDIN>; chomp $ans;
-	$block .= "  Arch\t$ans\n" if ($ans && !($ans =~ /^default$/i));
-
-	$block .= "</CLIENT>\n";
-	fileInsertAfter ($params{WORKLOAD}, "^</CLIENT>", $block);
-    }
-}
-
-# Create a user ldif file
-sub configUserLdif {
-    my $name = "conf/$defaultSection->{SERVER}.ldif";
-    print "\nWhat file to you want to create [$name]? ";
-    $ans = <STDIN>; chomp $ans;
-    $name = $ans if ($ans);
-
-    my $mode = "users";
-    print "\nDo you want to create a broadcast account [y]? ";
-    $ans = <STDIN>;
-    $mode .= " broadcast" unless ($ans =~ /^n/i);
-
-    my $basedn = $defaultSection->{SERVER};	# pick a default
-    $basedn =~ s/^.*?\.//;	# strip off before first dot
-    $basedn = "o=$basedn";
-
-    print "\nWhat is LDAP base DN [$basedn]? ";
-    $ans = <STDIN>; chomp $ans;
-    $basedn = $ans if ($ans);
-
-    my $args = $params{MAKEUSERSARGS};
-
-    print "\n    Common additional makeusers arguments:\n";
-    print "\t-s storeName -x storeCount \tMultiple store partitions\n";
-    print "\t[-3|-4]                    \tConfigure for NSMS 3.x or 4.x\n";
-    print "Any extra arguments to makeusers [$args]? ";
-    $ans = <STDIN>; chomp $ans;
-    $args = $ans if ($ans);
-
-    my $perlbin = "/usr/bin/perl";
-
-    $params{DEBUG} &&
-	print "$perlbin -Ibin -- bin/makeusers.pl $mode -w $params{WORKLOAD} -b '$basedn' -o $name $args\n";
-
-    print "\nGenerating $name (this can take a while)\n";
-    warn_system "$perlbin -Ibin -- bin/makeusers.pl $mode -w $params{WORKLOAD} -b '$basedn' -o $name $args";
-    print "LDIF generation complete.  See $name\n";
-    print "\tSee the manual or INSTALL to create users using the LDIF file.\n";
-}
-
-# This uses a match pattern plus text to text replacements.  
-# Could make all changes and then write out new workload
-# 	You would have to be carefull about sections with multi-line support.
-sub configWorkload {
-    my $ans;
-
-    print "\nWhat is the name of the mail host [$defaultSection->{SERVER}]: ";
-    $ans = <STDIN>; chomp $ans;
-    if ($ans) {
-	fileReplaceText ($params{WORKLOAD},
-			 "(SERVER|SMTPMAILFROM|ADDRESSFORMAT)", 
-			 $defaultSection->{SERVER}, $ans);
-	$defaultSection->{SERVER} = $ans; # needed for ldif generation
-    }
-    print "\nWhat is the user name pattern [$defaultSection->{LOGINFORMAT}]: ";
-    $ans = <STDIN>; chomp $ans;
-    if ($ans) {
-	fileReplaceText ($params{WORKLOAD},
-			 "(LOGINFORMAT|ADDRESSFORMAT)",
-			 $defaultSection->{LOGINFORMAT}, $ans);
-	$ans =~ s/%ld/0/;	# create smtpMailFrom user
-	my $olduser = $defaultSection->{SMTPMAILFROM};
-	$olduser =~ s/@.*$//;	# strip off after @
-	fileReplaceText ($params{WORKLOAD},
-			 "SMTPMAILFROM",
-			 $olduser, $ans);
-    }
-
-    print "\nWhat is the password pattern [$defaultSection->{PASSWDFORMAT}]: ";
-    $ans = <STDIN>; chomp $ans;
-    fileReplaceText ($params{WORKLOAD}, "PASSWDFORMAT", 
-		     $defaultSection->{PASSWDFORMAT}, $ans);
-
-    $defaultSection->{NUMLOGINS} = 100 unless ($defaultSection->{NUMLOGINS});
-    print "\nHow many users [$defaultSection->{NUMLOGINS}]: ";
-    $ans = <STDIN>; chomp $ans;
-    fileReplaceText ($params{WORKLOAD}, "(NUMADDRESSES|NUMLOGINS)",
-		     $defaultSection->{NUMLOGINS}, $ans);
-
-    $defaultSection->{FIRSTLOGIN} = 0 unless ($defaultSection->{FIRSTLOGIN});
-    print "\nWhat is the first user number [$defaultSection->{FIRSTLOGIN}]: ";
-    $ans = <STDIN>; chomp $ans;
-    fileReplaceText ($params{WORKLOAD}, "(FIRSTADDRESS|FIRSTLOGIN)",
-		     $defaultSection->{FIRSTLOGIN}, $ans);
-
-    unless ($params{NT}) {
-	configClients ();
-    }
-
-    print "\nDo you want to view the edited $params{WORKLOAD} [y]? ";
-    $ans = <STDIN>;
-    unless ($ans =~ /^n/i) {
-	print "Here is the edited $params{WORKLOAD}:\n\n";
-	fileShow ($params{WORKLOAD});
-	print "\n";
-    }
-
-    print "\nDo you want to generate a user LDIF file [y]? ";
-    $ans = <STDIN>;
-    unless ($ans =~ /^n/i) {
-	configUserLdif ();
-    }
-}
-
-# See if license file has been displayed
-if (($mode ne "cleanup") && (! -f ".license" )) {
-    fileShow ("LICENSE");
-    # SEAN: blow off annoying agreement message.
-#      print "\nDo you agree to the terms of the license? (yes/no) ";
-#      my $ans = <STDIN>;
-#      print "\n";
-#      unless ($ans =~ /^yes$/i) {
-#  	print "License not agreed to.\n";
-#  	exit 0;
-#      }
-    my ($sec, $min, $hour, $mday, $mon, $year) = localtime;
-    open (LIC, ">.license");
-    printf LIC "%04d$mon$mday$hour$min\n", $year+1900;
-    close (LIC);
-}
-
-if ($mode eq "config") {	# re-run config
-    configWorkload ();
-
-    print "\nMake any additional changes to $params{WORKLOAD} and then re-run 'setup'\n";
-    exit 0;
-} elsif ($mode ne "cleanup") {	# check if configured
-    my $unconf = 0; # see if default values are in use
-    foreach $section (@workload) {
-	($section->{SERVER})
-	    && ($section->{SERVER} =~ /example\.com$/)
-		&& $unconf++;
-	($section->{SMTPMAILFROM})
-	    && ($section->{SMTPMAILFROM} =~ /example\.com$/)
-		&& $unconf++;
-	($section->{ADDRESSFORMAT})
-	    && ($section->{ADDRESSFORMAT} =~ /example\.com$/)
-		&& $unconf++;
-	last if ($unconf > 0);
-    }
-    if ($unconf > 0) {
-	print "Server has not been configured (example.com is an invalid address).\n";
-	print "Do you want to setup a simple configuration now [y]?";
-	my $ans = <STDIN>;
-	if ($ans =~ /^n/i) {
-	    print "Re-run setup when you have edited the configuration.\n";
-	    exit 0;
-	}
-	configWorkload ();
-
-	print "\nMake any additional changes to $params{WORKLOAD} and then re-run 'setup'\n";
-	exit 0;
-    }
-}
-
-if ($mode eq "timesync") {
-    if ($params{NT}) {
-	print "Timesync has no effect on NT\n";
-	exit 0;
-    }
-    my ($sec, $min, $hour, $mday, $mon, $year) = localtime;
-    $mon += 1;			# adjust from 0 based to std
-    $systime = sprintf ("%02d%02d%02d%02d%04d.%02d",
-		     $mon, $mday, $hour, $min, 1900+$year, $sec);
-} elsif ($mode eq "checktime") {
-    if ($params{NT}) {		# if running on NT, then only single client
-	print "Checktime not needed on NT\n";
-	exit 0;
-    }
-    mkdir ("$resultbase", 0775);
-    mkdir ("$tmpbase", 0775);
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	foreach $cli (split /[\s,]/, $slist) {
-	    open MAKEIT, ">$tmpbase/$cli.tim";
-	    close MAKEIT;
-	}
-    }
-} elsif (($mode eq "setup") || ($mode eq "cleanup")) {
-    @msgs = <data/*.msg>;
-    foreach (@files = @msgs) { s/data\/// }
-    print "Found these message files:\n@files\n\n";
-    if ($params{NT}) {		# handle NT localhost here
-	exit 0 if ($mode =~ /cleanup$/);
-	my $clipath = "bin/WINNT4.0/bin/mailclient.exe";
-	print "Copying $clipath and message files to $cli\n";
-	die_system "copy $clipath $params{TEMPDIR}";
-	foreach $f (@files) {
-	    die_system "copy $f $params{TEMPDIR}";
-	}
-	exit 0;			# without perl:fork, no more to do
-    }
-}
-
-# iterate over every client in the testbed, complete the cmd and rsh
-foreach $section (@workload) {
-    next unless ($section->{sectionTitle} =~ /CLIENT/i);
-    my $slist = $section->{sectionParams};
-    $slist =~ s/HOSTS=\s*//; # strip off initial bit
-    foreach $cli (split /[\s,]/, $slist) {
-	my $rsh = ($section->{RSH}) ? $section->{RSH} : $params{RSH};
-	my $rcp = ($section->{RCP}) ? $section->{RCP} : $params{RCP};
-	my $tempdir;
-	if ($section->{TEMPDIR}) {
-	    $tempdir = $section->{TEMPDIR};
-	} elsif ($params{TEMPDIR}) {
-	    $tempdir = $params{TEMPDIR};
-	}
-
-	my $cliarch = $section->{ARCH};
-
-	# presumed architecture for bin/mailclient on localhost:
-	my $local_arch = `bin/nsarch`;
-	chomp $local_arch;
-
-	# Try to determine arch if it hasn't been explicitly set.
-	if (!$cliarch) {
-	    if ($cli =~ /localhost/) {
-		$cliarch = `bin/nsarch`;
-		chomp $cliarch;
-	    } else {
-		$cliarch = `$rsh $cli sh < bin/nsarch`;
-		chomp $cliarch;
-	    }
-	}
-
-	# most time critical first
-	if ($mode eq "timesync") {
-	    next if ($cli =~ /^localhost$/i); # dont reset our own time
-	    # run all these in parallel to minimize skew
-	    next if ($cliarch eq "NT4.0");
-	    forkproc ($rsh, $cli, "date $systime");
-	}
-
-	elsif ($mode eq "checktime") {
-	    # run all these in parallel to minimize skew
-	    forkproc ($rsh, $cli, ($cliarch eq "NT4.0")
-		      ? "time" : "date",
-		      "/dev/null", "$tmpbase/$cli.tim");
-	}
-
-	elsif ($mode eq "setup") {
-	    my ($clibin) = split /\s/, (($section->{COMMAND})
-					? $section->{COMMAND}
-					: $params{CLIENTCOMMAND});
-	    my $clipath = '';	# do nothing by default
-
-	    # Look for architecture-specific binary.
-	    if ($cliarch) {
-
-		# fallback to just os-name if we can't find an exact match.
-		my $approx = $cliarch;
-		$approx =~ s/^(\D+).*/$1/;
-		my $approx_bin = <"bin/${approx}*/bin/$clibin">;
-
-		if (-x "bin/$cliarch/bin/$clibin") {
-		    # exact match.
-		    $clipath = "bin/$cliarch/bin/$clibin";
-		} elsif (-x $approx_bin) {
-		    # approximate match
-		    $clipath = $approx_bin;
-		} elsif ($local_arch =~ /^$approx/) {
-		    # same arch as localhost
-		    $clipath = "bin/mailclient";
-		} else {
-		    print STDERR
-			"Requested OS $cliarch for $cli not found.  ",
-			"Not copying binary.\n";
-		}
-	    } else {
-		# arch not found
-		print STDERR "Cannot determine architecture for $cli.  ",
-		"Not copying binary.\n";
-	    }
-	    # See if we have anything to copy:
-	    if ("$clipath @files" !~ /\S/) {
-		print STDERR "Nothing to copy to $cli.  Skipping.\n";
-		next;
-	    }
-	    my $rdir = ($tempdir) ?  "$tempdir/" : ".";
-	    # chmod so that the remote files can be easily cleaned up
-	    my $rcmd = "chmod g+w @files $clibin; uname -a";
-	    $rcmd = "cd $tempdir; " . $rcmd if ($tempdir);
-	    $rdir =~ s!/!\\!g if ($cliarch eq "NT4.0");
-	    if ($cli =~ /^localhost$/i) {
-		die "TEMPDIR must be set for 'localhost'\n"
-		    unless ($tempdir);
-		die "Invalid local NT copy.  Should never get here.\n"
-		    if ($cliarch eq "NT4.0"); # should never happen
-		print "Copying $clipath and message files to $rdir\n";
-		die_system ("$cpcmd @msgs $clipath $rdir");
-		die_system ($rcmd);
-	    } else {
-		print "$rcp $clipath @msgs $cli:$rdir\n" if ($params{DEBUG});
-		print "Copying $clipath and message files to $cli:$rdir\n";
-		warn_system (split (/\s+/, $rcp), $clipath, @msgs, "$cli:$rdir");
-		next if ($cliarch eq "NT4.0"); # chmod not valid
-		print "rcmd='$rcmd'\n" if ($params{DEBUG});
-		die_system (split (/\s+/, $rsh), $cli, $rcmd);
-	    }
-	    print "\n";
-	}
-
-	elsif ($mode eq "cleanup") {
-	    if ($params{DEBUG}) {	# get debug files
-		print "Cleaning up debug files on $cli\n";
-		my $rcmd = ($cliarch eq "NT4.0") ? "DEL" : "$rmcmd";
-		$rmcmd .= " mstone-debug.[0-9]*";
-		$rcmd = "cd $tempdir; " . $rcmd if ($tempdir);
-		$rcmd =~ s/;/&&/g if ($cliarch eq "NT4.0");
-		if ($cli =~ /^localhost$/i) {
-		    die "TEMPDIR must be set for 'localhost'\n"
-			unless ($tempdir);
-		    warn_system ($rcmd);
-		} else {
-		    warn_system (split (/\s+/, $rsh), $cli, $rcmd);
-		}
-	    } else {
-		print "Cleaning $cli\n";
-		my $rcmd = ($cliarch eq "NT4.0") ? "DEL" : "$rmcmd";
-		$rcmd .= " $clibin @files";
-		$rcmd = "cd $tempdir; " . $rcmd if ($tempdir);
-		$rcmd =~ s/;/&&/g if ($cliarch eq "NT4.0");
-		if ($cli =~ /^localhost$/i) {
-		    die "TEMPDIR must be set for 'localhost'\n"
-			unless ($tempdir);
-		    warn_system ($rcmd);
-		} else {
-		    warn_system (split (/\s+/, $rsh), $cli, $rcmd);
-		}
-	    }
-	}
-
-	else {
-	    die "Couldn't recognize mode $mode!\n";
-	}
-    }
-}
-
-# wait for children to finish
-if (($mode eq "timesync") || ($mode eq "checktime")) {
-    $pid = wait();
-    while ($pid != -1) {
-	$pid = wait();
-    }
-}
-
-# Print the results of the time checks
-if ($mode eq "checktime") {
-    print "Time from each client:\n";
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	foreach $cli (split /[\s,]/, $slist) {
-	    open TIMEFILE, "$tmpbase/$cli.tim"
-		|| warn "Counldn't open $tmpbase/$cli.tim\n";
-	    printf "%32s: ", $cli;
-	    while (<TIMEFILE>) { print; last;} # single line (2 on NT)
-	    close(TIMEFILE);
-	    unlink "$tmpbase/$cli.tim";
-	}
-    }
-}

mozilla/mstone/bin/smtpsink.pl

@@ -1,280 +0,0 @@
-/*
- * The contents of this file are subject to the Netscape Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/NPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is the Netscape Mailstone utility,
- * released March 17, 2000.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation. Portions created by Netscape are
- * Copyright (C) 1999-2000 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):     Sean O'Rourke <sean@sendmail.com>
- *                     Thom O'Connor <thom@sendmail.com>
- *                     Sendmail, Inc.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU Public License Version 2 or later (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of
- * those above.  If you wish to allow use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the NPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the NPL or the GPL.
- */
-
-use Thread qw(async);
-use FileHandle qw(_IOLBF);
-use Socket;
-use strict;
-use Getopt::Long;
-
-# options
-my $maxconn = SOMAXCONN;
-my $t_banner = 0;
-my $t_from = 0;
-my $t_rcpt = 0;
-my $t_dot = 0;
-my $port = 25;
-my $cs = '';
-my $log = '';
-my $proto = getprotobyname('tcp');
-
-# statistics
-my ($cmds, $errs, $bytesw, $bytesr, $msgs);
-
-GetOptions('maxconn:i'		=> \$maxconn,
-	   'banner-delay:i'	=> \$t_banner,
-	   'from-delay:i'	=> \$t_from,
-	   'rcpt-delay:i'	=> \$t_rcpt,
-	   'dot-delay:i'	=> \$t_dot,
-	   'log:s'		=> \$log,
-	   'checksums:s'	=> sub { use Digest::MD5; $cs = $_[0]; })
-    || &usage;
-
-if (@ARGV == 1) {
-    ($port) = @ARGV;
-}
-
-if ($log) {
-    if (open(LOG, ">$log")) {
-	print STDERR "Logging messages to $log\n";
-    } else {
-	warn ("Cannot open logfile $log\n");
-	$log = '';
-    }
-}
-
-socket(S, PF_INET, SOCK_STREAM, $proto) || die $!;
-setsockopt(S, SOL_SOCKET, SO_REUSEADDR, pack("l", 1)) || die $!;
-
-(bind(S, sockaddr_in($port, INADDR_ANY))
- && listen(S, $maxconn))
-    || die $!;
-
-my $addr;
-my $fh = new FileHandle;
-my $cnt = 0;
-
-$SIG{INT} = sub { close(LOG); print STDERR "done\n"; exit 0; };
-
-while(my $addr = accept($fh, S)) {
-    if (++$cnt % 100 == 0) {
-	print STDERR "$cnt\r";
-    }
-    my $thr = async { do_smtp($addr, $fh); };
-    $thr->join;
-    $fh = new FileHandle;
-}
-
-sub usage
-{
-    print STDERR <<EOS;
-Usage: $0 [options] [port]
-EOS
-    exit -1;
-}
-
-sub netline
-{
-    my $fh = shift;
-    my $line = $fh->getline;
-    $line =~ s/\r\n$// if $line;
-    $line;
-}
-
-sub millisleep
-{
-    my $t = shift;
-    select(undef, undef, undef, $t) if $t > 0;
-}
-
-sub netprint($@)
-{
-    my ($fh, @stuff) = @_;
-    foreach (@_) {
-	s/([^\r])\n/$1\r\n/g;
-	$fh->print($_);
-    }
-}
-
-sub do_smtp
-{
-    my ($addr, $s) = @_;
-    my $buf;
-    my ($port, $iaddr) = sockaddr_in($addr);
-    my $name = gethostbyaddr($iaddr, AF_INET);
-    $s->setvbuf($buf, _IOLBF, 1024);
-
-    millisleep($t_banner);
-    $s->print("220 wazzup, bro?\r\n");
-    my %state = ('conn'		=> $s,
-		 'host'		=> $name);
-    my %funcs = ('helo'		=> \&do_helo,
-		 'ehlo'		=> \&do_helo,
-		 'word'		=> \&do_helo,
-
-		 'quit'		=> \&do_quit,
-		 'latr'		=> \&do_quit,
-
-		 'mail'		=> \&do_from,
-		 'rcpt'		=> \&do_rcpt,
-		 'data'		=> \&do_data,
-		 'rset'		=> \&do_ok,
-		 'vrfy'		=> \&do_ok,
-		 'noop'		=> \&do_ok,
-		);
-    while (my $line = netline($s))
-    {
-	my ($cmd, $arg) = ($line =~ /^\s*(\S+)\s*(.*)$/);
-	die "cmd = `$cmd'" unless ($cmd = lc($cmd));
-	# fail 1% of commands
-	if ($funcs{$cmd}) {
-	    &{$funcs{$cmd}}(\%state, $cmd, $arg, \%funcs);
-	} else {
-	    $s->print("500 5.0.0 no.  Just... no.\r\n");
-	}
-    }
-    return 0;
-}
-
-sub already_said_that
-{
-    my ($state, $cmd, $arg) = @_;
-    $state->{conn}->print("503 5.0.0 Dude, you already said that.\r\n");
-}
-
-sub do_helo
-{
-    my ($state, $cmd, $arg) = @_;
-    $state->{helohost} = $arg;
-    die unless $cmd;
-    if ($cmd eq 'helo') {
-	if ($arg eq $state->{host}) {
-	    $state->{conn}->print("221 hello Mr. Honest\r\n");
-	} else {
-	    $state->{conn}->print("221 We know where you live, $state->{iaddr}\r\n");
-	}
-    } elsif ($cmd eq 'ehlo') {
-	my $esmtp = <<EOS;
-250-localhost is pleased to make your acquaintance, and offers:
-250 8bitmime
-EOS
-	if ($arg) {
-	    netprint($state->{conn}, $esmtp);
-	} else {
-	    $state->{conn}->print("501 5.0.0 tell me more...\r\n");
-	    return;
-	}
-    } else {
-	$state->{conn}->print("221 2.0.0 peace brother\r\n");
-    }
-}
-
-sub do_quit
-{
-    my ($state, $cmd) = @_;
-    $state->{conn}->print( "221 2.0.0 drop in any time\r\n");
-    close ($state->{conn});
-}
-
-sub do_from
-{
-    my ($state, $cmd, $args, $funcs) = @_;
-    millisleep($t_from);
-    $state->{conn}->print( "250 2.1.0 Okay, keep talking\r\n");
-    $funcs->{rcpt} = \&do_rcpt;
-}
-
-sub do_rcpt
-{
-    my ($state, $cmd, $args, $funcs) = @_;
-    my ($rcpt) = ($args =~ /to\:\s*(.+)/i);
-    millisleep($t_rcpt);
-    $state->{conn}->print("250 2.1.5 ${rcpt}'s cool\r\n");
-    $funcs->{data} = \&do_data;
-}
-
-sub do_data
-{
-    my ($state, $cmd, $args, $funcs) = @_;
-    $state->{conn}->print( "354 up to the dot...\r\n");
-    if ($cs) {
-	my $line;
-	my $md5 = Digest::MD5->new;
-	# skip headers
-    header: while ($_ = netline($state->{conn})) {
-	    last header if /^$/;
-	    last body if /^\.$/;
-	}
-
-    body: while ($_ = $state->{conn}->getline) {
-	    if (/^=CS=MD5=(.+)\r/) {
-		my $sum = $1;
-		my $end = netline($state->{conn});
-
-		if ($end ne '.') {
-		    print STDERR "Fake checksum?: $sum\n";
-		    while (netline($state->{conn}) ne '.') { }
-		} elsif (lc($sum) eq lc($md5->hexdigest)) {
-#  		    print STDERR "MD5 sum OK.\n";
-		} else {
-		    print STDERR "MD5 sum mismatch: $sum, ",
-			$md5->hexdigest, "\n";
-		}
-		last body;
-	    } elsif (/^\.\r$/) {
-  		print STDERR "no checksum\n" if $cs =~ /^r/;
-		last body;
-	    }
-	    print LOG $_ if $log;
-	    $md5->add($_);
-	}
-	print LOG ".\r\n" if $log;
-    } else {
-	local ($/) = "\r\n.\r\n";
-	$state->{conn}->getline;
-    }
-    millisleep($t_dot);
-    if (rand() % 100 == 0) {
-	$state->{conn}->print("451 ohshit\r\n");
-    } else {
-	$state->{conn}->print("250 2.0.0 I will deliver\r\n");
-    }
-}
-
-sub do_ok
-{
-    my ($state) = @_;
-    $state->{conn}->print("220 uhhuh\r\n");
-}

mozilla/mstone/bin/util.pl

@@ -1,825 +0,0 @@
-# util.pl -- utilities which used to live in bin/args.pl
-
-sub my_system {
-    my ($file, $line);
-    $file = shift;
-    $line = shift;
-    my $ret;
-    if (($ret = system(@_)) != 0) {
-	my $msg = "$file:$line: @_\n\t";
-	my ($excode, $sig, $cored) = ($ret >> 8, $ret & 127, $ret & 128);
-	if ($sig) {
-	    $msg .= "died with signal $sig";
-	    $msg .= ' (core dumped)' if ($cored);
-	    $msg .= "\n";
-	} else {
-	    $msg .= "exited abnormally with code $excode\n";
-	}
-	return $msg;
-    }
-    undef;
-}
-
-sub warn_system {
-    my ($pack, $file, $line) = caller;
-    my $msg = my_system($file, $line, @_);
-    warn $msg if $msg;
-}
-
-sub die_system {
-    my ($pack, $file, $line) = caller;
-    my $msg = my_system($file, $line, @_);
-    die $msg if $msg;
-}
-
-# Utility functions
-# Create a unique hash array. Programming Perl, 2nd edition, p291 (p217?)
-package ArrayInstance;
-sub new {
-    my $type = shift;
-    my %params = @_;
-    my $self = {};
-    return bless $self, $type;
-}
-
-package main;
-
-# run a command in the background, return its PID
-# Uses fork: will not run on NT in perl 5.004
-# if the server is "localhost", ignore the rcmd part
-# if stdin, stdout, and/or stderr is set, redirect those for the sub process
-sub forkproc {
-    my $rcmd = shift;
-    my $server = shift;
-    my $command = shift;
-    my $stdin = shift;
-    my $stdout = shift;
-    my $stderr = shift;
-
-    if (my $pid = fork()) {
-	return $pid;		# parent
-    }
-
-    # rest of this is in the child
-    if ($stdin) {		# redirect stdin if needed
-	close (STDIN);
-	open STDIN, "<$stdin"
-	    || die "Couldn't open $stdin for input\n";
-    }
-
-    if ($stdout) {		# redirect stdout if needed
-	close (STDOUT);
-	open STDOUT, ">>$stdout"
-	    || die "Couldn't open $stdout for output\n";
-    }
-
-    if ($stderr) {		# redirect stderr if needed
-	close (STDERR);
-	open STDERR, ">>$stderr"
-	    || die "Couldn't open $stderr for output\n";
-    }
-
-    if ($server =~ /^localhost$/i) {
-	exec $command;
-	die "Coundn't exec $command:$!\n";
-    } else {
-	exec split (/\s+/, $rcmd), $server, $command;
-	die "Coundn't exec $rcmd $server $command:$!\n";
-    } 
-}
-
-# Relocate file to tmp directory (if it is in the results directory),
-#  and put a ~ on the end of it.
-# ASSUMES tmp and results are on the same partition (on NT, same drive).
-# Usage: fileBackup (filename)
-sub fileBackup {
-    my $filename = shift;
-    my $bfile = $filename;
-
-    (-f $filename) || return 0;	# file doent exist
-    $bfile =~ s/$resultbase/$tmpbase/; # move to tmp
-    $bfile .= "~";		# indicate that this is a backup
-    (-f $bfile) && unlink ($bfile);
-    #print "Backing up $filename to $bfile\n"; # DEBUG
-    rename ($filename, $bfile) || unlink ($filename);
-}
-
-# Insert text into a file after a tagline
-# fileInsertAfter (filename, tagstring, newtext)
-sub fileInsertAfter {
-    my $filename = shift || die "fileInsertAfter: missing filename";
-    my $tagline = shift || die "fileInsertAfter: missing tagline";
-    my $newtext = shift || die "fileInsertAfter: missing text";
-    my $foundit = 0;
-
-    open(OLD, "<$filename") ||
-	open(OLD, "gunzip -c $filename |") ||
-	    die "fileInsertAfter: Could not open input $filename: $!";
-    open(NEW, ">$filename+") ||
-	die "fileInsertAfter: Could not open output $filename+: $!";
-
-    while (<OLD>) {
-	print NEW $_;		# copy (including tagline)
-
-	next unless (/$tagline/); # matched tagline
-
-	print NEW $newtext;	# insert new text
-	$foundit++;
-	last;			# only change first occurance
-    }
-
-    if ($foundit) {		# copy rest of file
-	while (<OLD>) {
-	    print NEW $_;
-	}
-    }
-
-    close (OLD);
-    close (NEW);
-    if ($foundit) {
-	fileBackup ($filename);
-	rename ("$filename+", "$filename");
-	#print "Updated $filename\n"; # DEBUG
-	return $foundit;
-    } else {
-	($params{DEBUG}) && print "No change to $filename\n"; # DEBUG
-	unlink ("$filename+");
-	return 0;
-    }
-}
-
-# Do text for text replacements in a file.
-# Perl wildcards are automatically quoted.
-# fileReplace (filename, matchPat, oldtext, newtext)
-sub fileReplaceText {
-    my $filename = shift || die "fileReplaceText: missing filename";
-    my $tagline = shift || die "fileReplaceText: missing tagline ($filename)";
-    my $oldtext = shift;
-    my $newtext = shift;
-    my $foundit = 0;
-
-    return if ($newtext eq "");	# nothing to do
-    return if ($oldtext eq "");	# nothing can be done
-
-    open(OLD, "<$filename") ||
-	open(OLD, "gunzip -c $filename |") ||
-	    die "fileReplaceText: Could not open input $filename: $!";
-    open(NEW, ">$filename+") ||
-	die "fileReplaceText: Could not open output $filename+: $!";
-
-    $oldtext =~ s/([][{}*+?^.\/])/\\$1/g; # quote regex syntax
-
-    while (<OLD>) {
-	if (/$tagline/i) { # matched tagline
-	    $foundit++;
-	    s/$oldtext/$newtext/; # do the replace
-	}
-	print NEW $_;
-    }
-
-    close (OLD);
-    close (NEW);
-    if ($foundit) {
-	fileBackup ($filename);
-	rename ("$filename+", "$filename");
-	#print "Updated $filename\n"; # DEBUG
-	return $foundit;
-    } else {
-	($params{DEBUG}) && print "No change to $filename\n"; # DEBUG
-	unlink ("$filename+");
-	return 0;
-    }
-}
-
-# copy a file to a new name.  Handles possible compression.  OS independent.
-# fileCopy (filename, newname)
-sub fileCopy {
-    my $filename = shift || die "fileReplaceText: missing filename";
-    my $newname = shift || die "fileReplaceText: missing newname ($filename)";
-
-    open(OLD, "<$filename") ||
-	open(OLD, "gunzip -c $filename |") ||
-	    die "fileReplaceText: Could not open input $filename: $!";
-    open(NEW, ">$newname") ||
-	die "fileReplaceText: Could not open output $newname: $!";
-
-    while (<OLD>) {		# copy it
-	print NEW $_;
-    }
-
-    close (OLD);
-    close (NEW);
-    return 0;
-}
-
-# display a file to STDOUT.  Handles possible compression
-sub fileShow {
-    my $filename = shift || die "fileShow: missing filename";
-    open(SHOWIT, "<$filename") ||
-	open(SHOWIT, "gunzip -c $filename.gz |") ||
-	    die "fileShow: Couldn't open $filename: $!";
-    while (<SHOWIT>) { print; }
-    close(SHOWIT);
-}
-
-# sub function to figure time extents
-# (start, end) = dataMinMax counterName \@protocols oldstarttime oldendtime
-# Use 0 for uninitialized start or end
-sub dataMinMax {
-    my $name = shift;
-    my $protos = shift;
-    my $start = shift;
-    my $end = shift;
-    
-    # make global
-    # create the plot script and data files
-    # Figure out the encompassing time extent
-    foreach $p (@$protos) {	# create the plot data files
-	my @times = sort numeric keys %{ $graphs{$p}->{$name}};
-	if ($#times <= 0) {
-	    next;
-	}
-	if (($start == 0) || ($times[0] < $start)) {
-	    $start = $times[0];
-	}
-	if (($end == 0) || ($times[0] > $end)) {
-	    $end = $times[$#times];
-	}
-    }
-    #printf ("Data $name start=$start end=$end (%d points)...\n",
-	#    $end - $start);
-    return ($start, $end);
-}
-
-# simple function to formatted a number into n, n K, n M, or n G
-sub kformat {
-    my $n = shift;
-    my $r = "";
-    if ($n > (1024*1024*1024)) {
-	$r = sprintf "%.2fG", $n / (1024*1024*1024);
-    } elsif ($n > (1024*1024)) {
-	$r = sprintf "%.2fM", $n / (1024*1024);
-    } elsif ($n > 1024) {
-	$r = sprintf "%.2fK", $n / 1024;
-    } else {
-	$r = sprintf "%d ", $n;
-    }
-    return $r;
-}
-
-# simple function to formatted a time into Ns, Nms, or Nus
-# the goal is to make a table of timss uncluttered and easy to read
-# I dont convert to minutes or hours because the non-1000x multipliers
-#   are hard to back solve in your head for comparisons
-sub tformat {
-    my $n = shift;
-    my $r = "";
-    if ($n == 0.0) {
-	$r = "0.0";		# make exactly 0 explicit
-    } elsif ($n < 0.001) {
-	$r = sprintf "%.2fus", $n * 1000 * 1000;
-    } elsif ($n < 1.0) {
-	$r = sprintf "%.2fms", $n * 1000;
-    } elsif ($n >= 1000.0) {
-	$r = sprintf "%.0fs", $n;
-    } elsif ($n >= 100.0) {
-	$r = sprintf "%.1fs", $n;
-    } else {
-	$r = sprintf "%.3fs", $n;
-    }
-    return $r;
-}
-
-#Usage: commify (1234567) returns 1,234,567
-sub commify {			# perl cookbook p64-65
-    my $text = reverse $_[0];
-    $text  =~ s/(\d\d\d)(?=\d)(?!\d*\.)/$1,/g;
-    return scalar reverse $text;
-}
-
-# subroutine to enable numeric sorts.  Programming Perl p218
-# Use: sort numeric ...
-sub numeric { $a <=> $b; }
-
-# on NT, turn slash to backslash, then print.  Else print.
-sub pathprint {
-    my $str = shift;
-    $str =~ s!/!\\!g if ($params{NT});	# turn slash to back slash
-    print $str;
-}
-    
-# figureTimeNumber number
-# Given an number like: 60m, 1h, 100s, 4d, 200
-# Return 60, 1, 100, 4, 200
-sub figureTimeNumber {
-    my $arg = shift;
-
-    ($arg =~ /([0-9]+)(s|sec|second|seconds|m|min|minute|minutes|h|hr|hour|hours|d|day|days)$/i)
-	&& return $1;
-    return $arg;			# return default
-}
-
-# figureTimeUnits number, default
-# Given an number like: 60m, 1h, 100s, 4d
-# Return a string of minutes, hours, seconds, days
-# Else return the second argument
-sub figureTimeUnits {
-    my $arg = shift;
-
-    ($arg =~ /(s|sec|second|seconds)$/i)	&& return "seconds";
-    ($arg =~ /(m|min|minute|minutes)$/i)	&& return "minutes";
-    ($arg =~ /(h|hr|hour|hours)$/i)	&& return "hours";
-    ($arg =~ /(d|day|days)$/i)		&& return "days";
-
-    return shift;		# return default
-}
-
-# figureTimeSeconds number, defaultUnits
-# Given an number like: 60m, 2h, 100s, 4d
-# Return 60*60, 2*60*60, 100, 4*24*60*60
-sub figureTimeSeconds {
-    my $arg = shift;
-
-    ($arg =~ /([0-9]+)(s|sec|second|seconds)$/i)	&& return $1;
-    ($arg =~ /([0-9]+)(m|min|minute|minutes)$/i)	&& return (60*$1);
-    ($arg =~ /([0-9]+)(h|hr|hour|hours)$/i)	&& return (60*60*$1);
-    ($arg =~ /([0-9]+)(d|day|days)$/i)		&& return (24*60*60*$1);
-
-    if ($_) { 
-	my $def = shift;
-	return $arg * figureTimeSeconds ("1$def"); # return scaled by default
-    } else {
-	return $arg;		# return it
-    }
-}
-
-# BACK COMPATIBILITY (everything now in the workload file)
-# read the testbed conf file, convert to workload sections
-# machine, how many processes, how many threads/proc, arch
-# only the first 2 fields are required.  Lines starting with # are ignored.
-# You can include other files using <include conf/filename.tbd>
-# exampe:
-#	client1  5 10 SunOS5.5.1
-sub readTestbedFile {
-    my $filename = shift;
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	print "Testbed $filename skipped, clients read in workload\n";
-	return 1;			# clients already read in workload
-    }
-
-    my $level = 0;
-    if ($_) {
-	$level = 1 + shift;
-	die "Too many nested includes ($level) in $filename!"
-	    unless ($level < 100);
-    }
-    my $handle = "$filename$level";
-    open($handle, "<$filename") ||
-	open($handle, "gunzip -c $filename.gz |") ||
-	    die "Couldn't open testbed $filename: $!";
-
-    while(<$handle>) {
-	chomp;
-
-	s/#.*//;		# strip any comments from line
-
-	m/^\s*$/o &&  next; 	# continue if blank line
-
-	# handle include statement
-	if (m/^<(include|INCLUDE)\s+([^\s]+)\s*>/o) {
-	    #print "Including $2 from $filename\n";
-	    readTestbedFile ($2, $level) || die;
-	    next;
-	}
-
-	# get the server name and number of processes 
-	my @line = split(/\s+/);
-				# create CLIENT entry in workload
-	my $sparm = ArrayInstance->new();
-	if ($line[1]) {
-	    $sparm->{"sectionTitle"} = "CLIENT";
-	    $sparm->{"sectionParams"} = "HOSTS=$line[0]";
-	    $sparm->{"PROCESSES"} = $line[1];
-	    $sparm->{"THREADS"} = $line[2] if ($line[2]);
-	    $sparm->{"ARCH"} = $line[3] if ($line[3]);
-	} else {
-	    $sparm->{"sectionTitle"} = "MONITOR";
-	    $sparm->{"sectionParams"} = "HOSTS=$line[0]";
-	    $sparm->{"COMMAND"} = $line[2];
-	}
-	($params{DEBUG})
-	    && print "<$sparm->{sectionTitle} $sparm->{sectionParams}>\n";
-	push @workload, $sparm;
-    }
-    close ($handle);
-}
-
-# BACK COMPATIBILITY (everything now in the saved workload file)
-# This is now only needed to process mailstone4.1 runs
-sub readConfigFile {
-    my $filename = shift;
-    open(CONFIG, "<$filename") ||
-	open(CONFIG, "gunzip -c $filename.gz |") ||
-	    die "Couldn't open config file $filename: $!";
-
-    while(<CONFIG>) {
-	chomp;
-
-	s/#.*//;		# strip any comments from line
-
-	m/^\s*$/o && next; 	# continue if blank line
-
-	# get the property and value
-	my @line = split(/=/);
-	$params{$line[0]} = $line[1];
-    }
-    close CONFIG;
-}
-
-# read the workload file and store it as a list of hashes
-# Each hash always has the fields: sectionTitle and sectionParams
-# usage: readWorkloadFile filename, \@list
-sub readWorkloadFile {
-    my $filename = shift || die "readWorkloadFile: Missing file name";
-    my $plist = shift || die "readWorkloadFile: Missing return list";
-    my $level = 0;		# file inclusion level
-    my @handles;
-
-    my $fh = "$filename$level";
-
-    ($params{DEBUG}) && print "Reading workload from $filename.\n";
-    open($fh, "<$filename") ||
-	open($fh, "gunzip -c $filename.gz |") ||
-	    die "readWorkloadFile Couldn't open testbed $filename: $!";
-    $includedFiles{$filename} = 1; # mark file as included
-
-    my $sparm=0;
-    my $conline = "";
-    
-    while($fh) {
-	while(<$fh>) {
-	    s/#.*//;		# strip any comments from line (quoting?)
-	    s/\s*$//;		# strip trailing white space
-	    if ($conline) {	# utilize line continue
-		$_ = $conline . "\\\n" . $_;
-		$conline = "";
-	    }
-	    if (m/\\$/o) {	# check for quoted line continue
-		s/\\$//;	# 
-		$conline = $_;
-		next;
-	    }
-	    s/^\s*//;		# strip initial white space
-	    m/^$/o &&  next;	# continue if blank line
-
-	    # handle include and includeOnce statements
-	    if ((m/^<(include)\s+(\S+)\s*>/i)
-		|| (m/^<(includeonce)\s+(\S+)\s*>/i)) {
-		my $incfile = $2;
-		if (($1 =~ m/^includeonce/i) && ($includedFiles{$incfile})) {
-		    ($params{DEBUG})
-			&& print "readWorkloadFile:includeOnce $incfile already read.\n";
-		    next;
-		}
-		($params{DEBUG})
-		    && print "readWorkloadFile include $incfile from $filename.\n";
-		$includedFiles{$incfile} = 1; # mark file
-		push @handles, $fh; # push current handle on to stack
-		if ($level++ > 99) { # check recursion and make handles unique
-		    die "readWorkloadFile: include level too deep: $filename $level\n";
-		}
-		$fh = "$incfile$level";
-		open($fh, "<$incfile") ||
-		    open($fh, "gunzip -c $incfile.gz |") ||
-			die "readWorkloadFile Couldn't open testbed file $incfile: $!";
-		$filename = $incfile;	# for error messages
-		next;
-	    }
-
-	    if (m!^</(\w+)>$!o) { # end of section
-		my $end = $1;
-		unless ($sparm->{"sectionTitle"} =~ /$end/i) {
-		    die "readWorkloadFile Mismatched section $filename: $. '$sparm->{sectionTitle}' '$end'\n";
-		    return 0;
-		}
-		($params{DEBUG}) && print "</$sparm->{sectionTitle}>\n";
-		push @$plist, $sparm;
-		$sparm = 0;
-		next;
-	    }
-
-	    if (m!^<(\w+)\s*(.*)>$!o) { # start of section
-		my $sec = $1;
-		my $more = $2;
-
-		if ($sparm) {
-		    die "readWorkloadFile Missing section end $filename: $. '$sparm->{sectionTitle}'\n";
-		}
-		if ($sec =~ /CONFIG/i) { # special case, map to existing global
-		    $sparm = \%params;
-		} elsif ($sec =~ /DEFAULT/i) { # special case, only one DEFAULT
-		    if ($defaultSection) { # use existing defaultSection
-			$sparm = $defaultSection;
-		    } else {	# create a new one
-			$sparm = ArrayInstance->new();
-			$sparm->{"sectionTitle"} = uc $sec; # ignore case
-			$sparm->{"lineList"} = ();
-			$defaultSection = $sparm;
-		    }
-		} else {
-		    $sparm = ArrayInstance->new();
-		    $sparm->{"sectionTitle"} = uc $sec; # ignore case
-		    $sparm->{"lineList"} = ();
-		}
-		$sparm->{"sectionParams"} = $more; # take newest more info
-		($params{DEBUG})
-		    && print "<$sparm->{sectionTitle} $sparm->{sectionParams}>\n";
-		next;
-	    }
-
-	    # must be in a section, get parameters
-	    unless ($sparm) {
-		die "readWorkloadFile Entry encountered outside a section $filename: $. $_\n";
-		return 0;
-	    }
-	    my ($nm, $val) = split (/[\s=]+/, $_, 2);
-	    $nm = uc $nm;	# ignore case
-	    ($params{DEBUG}) && print "    $nm = $val\n";
-	    if ($nm =~ /ACCOUNTFORMAT/) { # BACK COMPATIBILITY
-		print "WARNING: 'accountFormat' is obsolete.  Use 'addressFormat' and 'loginFormat'\n";
-		$sparm->{"addressFormat"} = $val;
-		push @{$sparm->{"lineList"}}, "addressFormat $val";
-		$val =~ s/@.+$//; # strip at and everything after
-		$sparm->{"loginFormat"} = $val;
-		push @{$sparm->{"lineList"}}, "loginFormat $val";
-		next;
-	    } elsif ($nm =~ /NUMACCOUNTS/) { # BACK COMPATIBILITY
-		print "WARNING: 'numAccounts' is obsolete.  Use 'numAddresses' and 'numLogins'\n";
-		$sparm->{"numAddresses"} = $val;
-		push @{$sparm->{"lineList"}}, "numAddresses $val";
-		$sparm->{"numLogins"} = $val;
-		push @{$sparm->{"lineList"}}, "numLogins $val";
-		next;
-	    } elsif ($nm =~ /BEGINACCOUNTS/) { # BACK COMPATIBILITY
-		print "WARNING: 'beginAccounts' is obsolete.  Use 'firstAddress' and 'firstLogin'\n";
-		$sparm->{"firstAddress"} = $val;
-		push @{$sparm->{"lineList"}}, "firstAddress $val";
-		$sparm->{"firstLogin"} = $val;
-		push @{$sparm->{"lineList"}}, "firstLogin $val";
-		next;
-	    } 
-	    push @{$sparm->{"lineList"}}, $_; # save lines in original order
-	    $sparm->{$nm} = $val;
-	    next;
-	}
-	close ($fh);
-	$fh = pop @handles || last; # empty include stack
-	$filename = $fh;
-	$sparm = 0;		# can only include whole sections
-    }
-    return 1;			# success
-}
-
-# Write out a workload list to a file
-# Optionally, pass in a list of sectionTitle's it should ignore
-# usage: writeWorkloadFile filename \@list [\@skipList]
-sub writeWorkloadFile {
-    my $filename = shift || die "writeWorkloadFile: Missing file name";
-    my $plist = shift || die "writeWorkloadFile: Missing return list";
-    my $skip = shift;
-    my @skipH;
-    my $configSeen = 0;
-    my $defaultSeen = 0;
-    my @paramH;
-
-    if ($skip) {
-	foreach $s (@$skip) {	# turn list into a hash
-	    $skipH{(uc $s)} = $s; # fix case for index
-	}
-    }
-    foreach $s (@workloadParameters) { # turn list into a hash
-	$paramH{(uc $s)} = $s;	# fix case for index
-    }
-
-    ($params{DEBUG}) && print "Writing workload to $filename.\n";
-    unless (open(WORKOUT, ">$filename")) {
-	die "Couldn't open testbed $filename: $!";
-    }
-    
-    foreach $sparm (@$plist) {	# each hash reference in the list
-	if (($skip)
-	    && ($skipH{$sparm->{"sectionTitle"}})) {
-	    #($params{DEBUG}) &&
-	    #print "Skipping section $sparm->{sectionTitle}\n";
-	    next;
-	}
-	
-	# all CONFIG,DEFAULT sections point to the same hash, output once only
-	if ($sparm->{"sectionTitle"} =~ /^CONFIG$/) {
-	    next if $configSeen;
-	    $configSeen++;
-	}
-	if ($sparm->{"sectionTitle"} =~ /^DEFAULT$/) {
-	    next if $defaultSeen;
-	    $defaultSeen++;
-	}
-	if ($sparm->{sectionParams}) { # write section with extra args
-	    print WORKOUT "<$sparm->{sectionTitle} $sparm->{sectionParams}>\n";
-	} else {
-	    print WORKOUT "<$sparm->{sectionTitle}>\n";
-	}
-	if ($sparm->{"sectionTitle"} =~ /^(CONFIG|CLIENT)$/) {
-	    # for Config or Client, output the hash  to get computed config
-	    foreach $k (sort keys %$sparm) { # output each parameter
-		# skip sectionTitle and sectionParams
-		($k =~ /^(sectionTitle|sectionParams|lineList)$/) && next;
-		printf WORKOUT "  %s\t%s\n",
-		($paramH{$k}) ? $paramH{$k} : $k,
-		$sparm->{$k};
-	    }
-	} else {	# write out the line list
-	    foreach $l (@{$sparm->{"lineList"}}) {
-		print WORKOUT "  $l\n";
-	    }
-	}
-	print WORKOUT "</$sparm->{sectionTitle}>\n\n";
-    }
-    close WORKOUT;
-}
-
-# Usage: getClientFilename hostname section
-sub getClientFilename  {
-    my $cli = shift || die "Missing client name";
-    my $section = shift || die "Missing section hash";
-    return "$tmpdir/$cli-$section->{GROUP}.out"
-	if ($params{USEGROUPS} && $section->{GROUP});
-    return "$tmpdir/$cli.out"
-}
-
-sub setConfigDefaults {		# set CONFIG defaults
-    # These are set after writing out the test copy to avoid clutter
-
-    # Path to gnuplot executable
-    $params{GNUPLOT}="gnuplot/gnuplot"
-	unless ($params{GNUPLOT});
-
-    # This is the directory the client lives in
-    $params{TEMPDIR} = "/var/tmp"
-	unless($params{TEMPDIR});
-
-    # Set default remote shell
-    #$params{RSH} = "rsh"
-    $params{RSH} = "ssh"
-	unless($params{RSH});
-
-    # Set default remote copy
-    #$params{RCP} = "rcp"
-    $params{RCP} = "scp"
-	unless($params{RCP});
-
-    # Size of generated gifs
-    $params{CHARTHEIGHT} = 480
-	unless($params{CHARTHEIGHT});
-    $params{CHARTWIDTH} = 640
-	unless($params{CHARTWIDTH});
-    $params{CHARTPOINTS} = int (($params{CHARTWIDTH}-60)*0.8)
-	unless($params{CHARTPOINTS});
-
-
-    # The name of the remote executable
-    $params{CLIENTCOMMAND} = "mailclient"
-	unless ($params{CLIENTCOMMAND});
-
-    # Set default monitoring command
-    $params{MONITORCOMMAND} = "vmstat %f"
-	unless($params{MONITORCOMMAND});
-
-    # Set default switches to makeusers
-    $params{MAKEUSERSARGS} = "-4"
-	unless ($params{MAKEUSERSARGS});
-
-    # Figure out @protocols, this sets the report order
-    @protocols = ();
-    {
-	my %skipH;
-	foreach $s (@nonProtocolSections) { # turn list into a hash
-	    #print "$s ";
-	    $skipH{(uc $s)} = $s; # fix case for index
-	}
-	print "\n";
-	foreach $sparm (@workload) {	# each hash reference in the list
-	    next if ($skipH{$sparm->{"sectionTitle"}});
-
-	    ($params{DEBUG}) &&
-		print "Found protocol ". $sparm->{"sectionTitle"} . "\n";
-
-	    push @protocols, $sparm->{"sectionTitle"};
-				# add to skip list so only added once
-	    $skipH{(uc $sparm->{"sectionTitle"})} = $sparm->{"sectionTitle"};
-	}
-    }
-    @protocolsAll = @protocols;
-    push @protocolsAll, "Total";
-
-    # figure out the graphs ???
-}
-
-sub parseArgs {			# get args
-    while (@ARGV) {
-	my $arg = shift(@ARGV);
-
-	if ($arg =~ /^-a$/i) {	# was undocumented feature in 4.1
-	    $params{ADDGRAPHS} = shift(@ARGV); # extra graphs
-	    next;
-	}
-	if ($arg =~ /^-b$/i) {
-	    $params{TITLE} = shift(@ARGV); # banner
-	    next;
-	}
-
-	# BACK COMPATIBILITY (everything now in the saved workload file)
-	if ($arg =~ /^-c$/i) {	# config file, read when encountered
-	    my $configFile = shift(@ARGV);
-	    readConfigFile ($configFile);
-	    next;
-	}
-
-	if ($arg =~ /^-d$/i) {
-	    $params{DEBUG}++;	# Debug
-	    next;
-	}
-
-	if ($arg =~ /^-h$/i) {	# Help
-	    print "Usage: -w workfile [-t time] [-r ramptime] [-l load] [-v] [-d]\n";
-	    print "\t[-b banner] [-n notes] [-s sysconfigfile] [-a add_graphs_file]\n";
-	    print "\t[-c configfile] [-m machinefile] [-z] [PARAM=value]...\n";
-
-	    die "Usage";
-	}
-
-	if ($arg =~ /^-l$/i) {	# "load", FIX: naming conventions
-	    $params{CLIENTCOUNT} = shift(@ARGV); # desired client count
-	    next;
-	}
-
-	# BACK COMPATIBILITY (everything now in the saved workload file)
-	if ($arg =~ /^-m$/i) {
-	    $params{TESTBED} = shift(@ARGV);	# testbed machines file
-	    next;
-	}
-
-	if ($arg =~ /^-n$/i) {
-	    $params{COMMENTS} = shift(@ARGV); # notes
-	    next;
-	}
-
-	if ($arg =~ /^-r$/i) {
-	    $params{RAMPTIME} = shift(@ARGV); # ramptime
-	    next;
-	}
-	if ($arg =~ /^-s$/i) {
-	    $params{SYSCONFIG} = shift(@ARGV); # system config html file
-	    next;
-	}
-	if ($arg =~ /^-t$/i) {
-	    $params{TIME} = shift(@ARGV); # test time
-	    next;
-	}
-
-	if ($arg =~ /^-v$/i) {
-	    $params{VERBOSE} = 1;	# verbose mode
-	    next;
-	}
-
-	if ($arg =~ /^-w$/i) {	# workload file (may occur multiple times)
-	    my $f = shift(@ARGV);
-	    readWorkloadFile ($f, \@workload) || die "Error reading workload: $@\n";
-	    $params{WORKLOAD} = $f;
-	    next;
-	}
-
-	if ($arg =~ /^-z$/i) {
-	    $params{NT} = 1;		# NT mode
-	    next;
-	}
-
-	# any other CONFIG parameter: FIELD=value
-	if ($arg =~ /^(\w+)=(\S.*)$/) {
-	    my $field = uc $1;
-	    $params{$field} = $2;
-	    next;
-	}
-	die "Unknown argument '$arg'";
-    }
-
-    if ($params{NT}) {		# should use Cwd module
-	$cwd = `cd`;		# NT get current directory
-	$cwd = `pwd` unless ($cwd); # in case we are really on UNIX
-    } else {
-	$cwd = `pwd`;		# in case we are really on UNIX
-    }
-    chomp $cwd;		# strip NL
-}
-
-return 1;

mozilla/mstone/conf/README.wld.in

@@ -1,271 +0,0 @@
-I.   Format
-II.  Workload Configuration Sections
-III. Report Generation Sections
-
----------
-I. Format
----------
-
-The config-file format is very free-form -- for example, this text is
-skipped as a "comment" because it doesn't look like anything else.  A
-section always starts with a line ending in a colon.  Everything up to
-the next section, end-of-file, or `__END__' is part of the current
-section.
-
-Name/value pairs within a section are pairs starting with whitespace,
-and separated by a colon followed by whitespace.  So you can write
-something like this
-
-#	hello there:		     mister foo
-
-and it will be ignored.  Had the '#' before the "hello" not been
-there, the attribute name would have been `hello there' and its value
-would have been `mister foo'.  Leading and trailing whitespace is
-skipped, but internal whitespace is perfectly OK.  Note that the
-"comment" character doesn't have to be a '#', but can be anything you
-want (except whitespace).
-
-Leading whitespace also denotes continued values.  So
-
-	foo:				blah blah
-    and some more words which are part of foo's value.
-
-creates a variable named 'foo' with this value (including the \n) -- 
-"blah blah
-and some more words which are part of foo's value."
-
-Finally, anything after '__END__' on a line by itself gets inserted
-literally into each .wld file.  This is the place to put <monitor>
-sections.
-
---------------------------
-II. Workload Configuration
---------------------------
-
-Parameters with no default are required.
-
-Messages
---------
-
-Message attributes are defined in the `message' section.  
-
-Parameter	Default		Description
----------	-------		-----------
-size				size distribution (including headers).
-recipients		    	number of recipients
-headers		~unif(10, 30)	number of headers
-line length	60		line length
-mime	 	0		number of MIME parts
-
-Users
------
-
-User behavior parameters are described in the `user' section.
-
-Parameter	Default		Description
----------	-------		-----------
-messages per day
-protocol			mail read
-activity			`DURATION each TIME' or `START - STOP'
-check interval			how often user checks mail when active
-read messages	0		number of old msgs each user has
-read time	0		how long user takes to `read' a message
-keep		0		proportion of messages kept on server
-connection type <unlimited>	`latency = X ; bandwidth = X'
-drop rate	0		proportion of connections dropped before logout
-
-Delivery
---------
-
-Delivery parameters are described in the `delivery' section.
-
-Parameter		Default		Description
----------		-------		-----------
-messages per connection	1		messages sent per SMTP session
-percent remote		0		% mail going to remote host (sink)
-connection type		<unlimited>	
-fluctuation		<uniform>	`START - END = X % ; ...'
-
-Test
-----
-
-The `test' section configures the number of users, the time of day to
-be simulated, etc.
-
-Parameter		Default		Description
----------		-------		-----------
-start					time of day to start sim
-end					end time of day.
-length					duration.  Either length or end 
-					must be specified.
-users					total user base
-percent active				percentage of total user base active
-					during test period
-messages per second			messages per second to delivery for
-					SMTP-only simulation.  Either
-					`messages per second' or `users'
-					and `percent active' must be
-					specified.
-comments		<nothing>	notes on test.
-preparer		Anonymous	Name to use on reports.
-date			<ctime(3)>
-configuration		<nothing>	Configuration name for report.
-
-Environment Configuration
--------------------------
-
-Several sections describe the test environment:
-
-Sink
-----
-
-The `sink' section describes the remote mail sink.
-
-Parameter		Default		Description
----------		-------		-----------
-addressFormat		smuser%ld@	Like addressFormat, but used to 
-					generate remote addresses.
-					`hostname' will be appended if it
-					ends in `@'.
-hostname				host on which SMTP sink lives.  Used
-					for remote delivery.
-
-Server
-------
-
-The `server' section describes the mail server to be sized:
-
-Parameter		Default		Description
----------		-------		-----------
-smtp port		25
-pop port		110
-imap port		143
-web port		1066
-
-hostname				Mail server
-
-addressFormat		smuser%ld@	Passed to
-					sprintf(recipient, addressFormat,
-					        userNum, domainNum).  If
-					addressFormat ends in `@', `server'
-					is automatically appended.
-loginFormat		smuser%ld@	Same as addressFormat, but used to
-					generate usernames.
-passwdFormat		twang		passed to sprintf(passwd, passwdFormat,
-						          userNum, domainNum).
-firstAddress		0		first userNum for addresses
-firstLogin		0		first userNum for logins
-smtpMailFrom		$USER@$HOST	sending address on test mail.
-
-name					Printable server name for reports.
-hardware				Brief hardware description.
-software				Brief software description.
-
-Clients
--------
-
-The `clients' section describes test client configuration.
-
-Parameter		Default		Description
----------		-------		-----------
-smtp			localhost	client machines for SMTP
-imap			localhost	for IMAP
-pop			localhost	for POP3
-web			localhost	for WEBMAIL
-
-rsh			rsh		rsh program to start remote clients
-rcp			rcp		rcp program to distribute files
-command			mailclient	program to run to start clients
-
-cert file				file containing SSL certificate
-key file				file containing SSL key
-
-Ugly Mstone details
--------------------
-
-The `mstone' section controls low-level details of how the workload
-description is translated into mstone terms.  The parameters make some
-assumptions about the size of both the test clients and the server, so
-they may have to be tweaked.  For small- to mid-size configurations,
-the defaults should work.
-
-Parameter		Default		Description
----------		-------		-----------
-preload rate		5		msgs/sec to deliver during preload.
-preload per connection	100		messages per SMTP session
-preload delivery time	750		msec expected message delivery time.
-					used to control throttling.
-preload throttle	500		msec faster/slower than expected at
-					which to throttle
-throttleFactor		1.1		factor by which to increase/decrease
-					delivery rate when throttling
-
-read rate		40		msgs/sec to read when aging old
-					messages.
-read clients		5		test clients to use for aging
-read protocol		(user:protocol)	protocol to age messages (e.g. imap)
-
-rampTime		0		test rampup time
-smtp connection time	10s
-pop user spacing	10s		MULTIPOP: time between users
-pop connections per client 10		MULTIPOP: connections per client
-no event queues		false		use 1 thread per client
-max threads per proc	250
-clientCount		10000		artificial global clientCount
-
-----------------------
-III. Report Generation
-----------------------
-
-There are several additional configuration sections to provide
-additional information for sizing reports.  The code is in
-`lib/{sizing,hardware}_defaults.pm'.
-
-QoS Constraints
----------------
-
-Quality of Service constraints are specified in the `qos' section.
-See reports/qos.in for an example.  The qos section can have any
-number of members.  The name of each member is a description which
-will appear in the sizing report.  The value is a block of perl code
-which should return a pair of values when evaluated in a context where
-`$run' is a reference to a hash containing data on the test run to be
-evaluated.  The first value is a value corresponding to this
-constraint which will be printed in the report.  The second is true if
-the run passed this constraint.
-
-Hardware
---------
-
-The `machine' section describes the hardware under test.  Unlike
-previous, simple sections, it containts nested values (as hash refs).
-
-Parameter		Description
----------		-----------
-
-processors
-	speed
-	cache
-
-network
-
-storage
-	controllers
-	disks
-		type
-		speed
-		model
-		timing
-OS
-	parameters
-	disks
-	logging
-
-Software
---------
-
-The `software' section describes the software under test.  If multiple
-types of software are in use, multiple software sections should be
-specified.  The only default parameter for software is the `name'.
-Other parameters should describe configuration information, version,
-etc.

mozilla/mstone/conf/com.wld.in

@@ -1,53 +0,0 @@
-test:
-	start:			8 AM
-	length:			1h
-	users:			** Number of users here ***
-
-	percent active:		100
-
-	comments:		auto-generated Corporate workload.
-
--- mail server configuration --
-
-server:
-	hostname:		** SERVER **
-
-# defaults given below --
-#	addressFormat:		smuser%ld@
-#	loginFormat:		smuser%ld@
-#	passwdFormat:		twang
-
--- test client configuration --
-
-clients:
-	smtp:			** SMTP clients here **
-	imap:			** IMAP clients here **
-
-# defaults are `rsh' and `rcp'
-#	rsh:			ssh
-#	rcp:			scp
-
--- Don't edit between here and the `__END__' marker --
-
-mstone:
-	rampTime:		30s
-
-message:
-	size: 			~lognormal(4k,4.5)
-	recipients:		~lognormal(1,2)		: [1, ]
-	mime:			~binomial(0.3)
-
-delivery:
-	fluctuation: 		8 AM - 4 PM = 90%
-
-user:
-	messages per day: 	50
-	read messages:	  	50
-	protocol:	  	IMAP
-	check interval:	  	~unif(5m, 8m)
-	connection type:  	latency = 0; bandwidth = 56k
-	keep:		  	100%
-	activity: 		8 AM - 4 PM; arrival rate = ~normal(20m, 10m) 
-
-__END__
-# your monitor sections go here...

mozilla/mstone/conf/general.wld

@@ -1,2 +0,0 @@
-<client HOSTS=localhost>
-</client>

mozilla/mstone/conf/general.wld.in

@@ -1,38 +0,0 @@
-# common setup info for tests
-# See sample.wld for detailed usage
-
-# Information on how the test is distributed and reported
-# Test independent configuration
-<CONFIG>
-  comments	Netscape MSG4.15
-  sysConfig 	conf/sample.html	# File for additonal system config
-
-  # Debug with short runs and a few clients, then increase test time
-  # These get overridden in the test specific files (or the command line)
-  clientCount	5	# nominal clientCount (usually overriden)
-  rampTime 	10s
-  time		30s
-
-  # each test should set a title in their CONFIG section
-  # This is a reminder when using old test workloads
-  title		Need to set test title
-</CONFIG>
-
-# Specify client machines
-<CLIENT HOSTS=localhost>
-</CLIENT>
-
-# Information on the test itself
-
-# Use the <Default> tag to set command defaults
-<DEFAULT>
-  server	mailhost.example.com
-  smtpMailFrom	mailtestuser0@mailhost.example.com
-  loginFormat	mailtestuser%ld
-  addressFormat	mailtestuser%ld@mailhost.example.com
-  passwdFormat	myPassword
-  numLogins	100
-  firstLogin	0
-  numAddresses	100
-  firstAddress	0
-</DEFAULT>

mozilla/mstone/conf/http.wld

@@ -1,10 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical HTTP GETs
-
-<includeOnce conf/general.wld>
-
-<HTTP>
-weight 100
-numLoops 1 
-httpcommand GET /
-</HTTP>

mozilla/mstone/conf/imap.series

@@ -1,74 +0,0 @@
-#!/bin/ksh
-# fire off the series of Mailstone IMAP tests
-
-# To test series setup, do: go_imap -n
-
-
-# Look for testname$test_form, first.  Override with: go_series -f <string>.
-export test_form="_mail02"
-
-export test_host="mail02"
-
-# string appended to every description.  Override with: go_series -d <string>.
-export desc_conf="12 CPUs"
-
-# Extra arguments common to all tests.  Any other args go here.
-# Note that arguments with embedded spaces wont work here.  
-#   Instead use: go_series -- <args...>
-export extra_args=""
-
-# error limit to abort sequence
-export error_limit=500
-
-# time to allow the server to calm down after each run (seconds)
-export sleep_time=120
-
-# who to mail results to
-#export mail_list="me@example.com,you@example.com"
-export mail_list=""
-
-# Get all the helper functions
-. test_utils.ksh
-
-### This is where the series of tests is defined
-
-# clean and re-start server
-if [[ $only_show_it -gt 0 ]] ; then
-  echo  "Would run:" "$@"
-  return 0
-else
-  # BUG: rsh never returns.
-  #   individual commands in clean work fine, but fail as a whole
-  rsh -n $test_host /bin/ksh /iplanet/bin/clean$test_form &
-  sleep 300 && kill -9 $!
-  wait
-fi
-
-# check our setup
-run timesync
-
-###echo "DEBUG exit" && exit 0
-
-run_test popdel 'Create mailboxes (random order)' -t 60m maxblocks=100000 "$@"
-run_test allpop 'Create mailboxes (exhaustive)' "$@"
-
-run_test imaplogin 'IMAP login rate' "$@"
-
-run_test smtp10k-5-5k 'Deliver 5, 5k messages to 10k users' "$@"
-sleep 200			# let queue drain (2000/(10 msg/sec))
-run_test imapread10k 'IMAP Message downloads 5k from 10k users' "$@"
-
-run_test smtp10k-5-5k 'Deliver 5, 5k messages to 10k users' "$@"
-sleep 200			# let queue drain (2000/(10 msg/sec))
-run_test imapread 'IMAP Message downloads 5k' "$@"
-
-run_test imapsmtp-throttle 'Combined IMAP-SMTP load (1 of 3)' "$@"
-run_test imapsmtp-throttle 'Combined IMAP-SMTP load (2 of 3)' "$@"
-run_test imapsmtp-throttle 'Combined IMAP-SMTP load (3 of 3)' "$@"
-
-# Some messages will be left from previous test
-run_test imapmaxusers 'IMAP 30K simultaneous users' "$@"
-
-# e-mail the whole batch
-[[ -n "$mail_list" ]] && \
-	    mail_series "DotCom IMAP: `date`" "$mail_list"

mozilla/mstone/conf/imap.wld

@@ -1,19 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical IMAP checks/reads
-
-<includeOnce conf/general.wld>
-
-<CONFIG>	# test specific config
-  title		IMAP reads
-  clientCount	100	# since IMAP has long sleeps, use lots of clients
-</CONFIG>
-
-<IMAP4>
-  weight	100
- #leaveMailOnServer	1
-
-  idleTime	2s	# time between login and first download check
-  loopDelay	5m	# time between download checks
-  numLoops	10	# how many check to do before closing the connection
-  blockTime	2s	# time between logout and next login (or other block)
-</IMAP4>

mozilla/mstone/conf/isp.wld.in

@@ -1,51 +0,0 @@
--- test size --
-
-test:
-	length:			90m
-	users:			** Number of users here ***
-	percent active:		10
-
-	comments:		Auto-generated ISP workload.
-
--- mail server configuration --
-
-server:
-	hostname:		** SERVER **
-
-# defaults -- 
-#	 addressFormat:		smuser%ld@
-#	 firstAddress:		0
-#	 loginFormat:		smuser%ld@
-#	 firstLogin:		0
-#	 passwdFormat:		twang
-#
-
--- test client configuration --
-
-clients:
-	smtp:			** SMTP clients here **
-	pop:			** POP clients go here **
-
-# defaults are `rsh' and `rcp'
-#	rsh:			rsh
-#	rcp:			rcp
-
--- Do not edit between here and the `__END__' marker
-
-message:
-	size: 			~lognormal(3k,4.5)
-	recipients:		~lognormal(1,1.5)	: [1, ]
-	mime:			30 %
-
-user:
-	messages per day: 	5
-	read messages:	  	0
-	protocol:	  	POP
-	check interval:	  	~unif(5m, 8m)
-	connection type:	latency = 0; bandwidth = 56k
-	keep:		  	5%
-	activity:		30 m each 24 h
-	drop rate:		0.5%
-
-__END__
-# other things (e.g. <monitor> sections) can go here...

mozilla/mstone/conf/lmtp_imap.wld

@@ -1,36 +0,0 @@
-<default>
-  addressFormat           smuser%ld@** DOMAIN **
-  loginFormat             smuser%ld@** DOMAIN **
-  passwdFormat            twang
-  server                  ** SERVER **
-</default>
-
-<smtp HOSTS=smtp>
-  blockTime               0
-  file                    auto
-  firstAddress            0
-  headers                 ~unif(10, 30)
-  mime                    ~binomial(0.3)
-  numAddresses            1000
-  numLoops                1
-  numRecips               ~lognormal(1,2)	: [1, ]
-  size                    ~lognormal(4k,4.5)
-  smtpMailFrom            sender0@** DOMAIN **
-  useEHLO                 2
-  portNum                 2003
-</smtp>
-
-<client HOSTS=localhost>
-  clients                 50
-  group                   smtp
-</client>
-<config>
-  comments                lmtp delivery
-  rampTime                0
-  time                    5m
-  title                   lmtp delivery - IMAP
-  useGroups               1
-</config>
-
-# other things (e.g. <monitor> sections) can go here...
-

mozilla/mstone/conf/lmtp_pop.wld

@@ -1,36 +0,0 @@
-<default>
-  addressFormat           smuser%ld@** DOMAIN **
-  loginFormat             smuser%ld@** DOMAIN **
-  passwdFormat            twang
-  server                  ** SERVER **
-</default>
-
-<smtp HOSTS=smtp>
-  blockTime               0
-  file                    auto
-  firstAddress            0
-  headers                 ~unif(10, 30)
-  mime                    30 %
-  numAddresses            1000
-  numLoops                1
-  numRecips               ~lognormal(1,1.5)	: [1, ]
-  size                    ~lognormal(3k,4.5)
-  smtpMailFrom            sender0@** DOMAIN **
-  useEHLO                 2
-  portNum                 2003
-</smtp>
-
-<client HOSTS=localhost>
-  clients                 50
-  group                   smtp
-</client>
-<config>
-  comments                lmtp delivery
-  rampTime                0
-  time                    5m
-  title                   lmtp delivery - POP
-  useGroups               1
-</config>
-
-# other things (e.g. <monitor> sections) can go here...
-

mozilla/mstone/conf/pop.series

@@ -1,84 +0,0 @@
-#!/bin/ksh
-# fire off the series of Mailstone tests
-
-# To test series, do: go_series -n
-
-
-# Look for testname$test_form, first.  Override with: go_series -f <string>.
-export test_form="_mail02"
-
-export test_host="mail02"
-
-# string appended to every description.  Override with: go_series -d <string>.
-export desc_conf="12 CPUs"
-
-# Extra arguments common to all tests.  Any other args go here.
-# Note that arguments with embedded spaces wont work here.  
-#   Instead use: go_series -- <args...>
-export extra_args=""
-
-# error limit to abort sequence
-export error_limit=500
-
-# time to allow the server to calm down after each run (seconds)
-export sleep_time=120
-
-# who to mail results to
-#export mail_list="me@example.com,you@example.com"
-export mail_list=""
-
-# Get all the helper functions
-. test_utils.ksh
-
-### This is where the series of tests is defined
-
-# clean and re-start server
-if [[ $only_show_it -gt 0 ]] ; then
-  echo  "Would run:" "$@"
-  return 0
-else
-  # BUG: this never returns.  rsh never returns
-  #   individual commands in clean work fine, but fail as a whole
-  rsh -n $test_host /bin/ksh /iplanet/bin/clean$test_form &
-  sleep 300 && kill -9 $!
-  wait
-fi
-
-# check our setup
-run timesync
-
-###echo "DEBUG exit" && exit 0
-
-run_test popdel 'Create mailboxes (random order)' -t 60m maxblocks=100000 "$@"
-run_test allpop 'Create mailboxes (exhaustive)' "$@"
-
-run_test popdel 'Empty checks: never used (1 of 3)' "$@"
-run_test popdel 'Empty checks: never used (2 of 3)' "$@"
-run_test popdel 'Empty checks: never used (3 of 3)' "$@"
-
-run_test smtp10k-5-5k 'Deliver 5, 5k messages to 10k users' "$@"
-sleep 200			# let queue drain (2000/(10 msg/sec))
-
-run_test popsave10k 'Message downloads 5k from 10k users (1 of 3)' "$@"
-run_test popsave10k 'Message downloads 5k from 10k users (2 of 3)' "$@"
-run_test popsave10k 'Message downloads 5k from 10k users (3 of 3)' "$@"
-
-run_test popsave 'Message downloads 5k (1 of 3)' "$@"
-run_test popsave 'Message downloads 5k (2 of 3)' "$@"
-run_test popsave 'Message downloads 5k (3 of 3)' "$@"
-
-run_test popsmtp-throttle 'Combined load (1 of 3)' "$@"
-run_test popsmtp-throttle 'Combined load (2 of 3)' "$@"
-run_test popsmtp-throttle 'Combined load (3 of 3)' "$@"
-
-run_test smtp100k 'SMTP delivery rate' "$@"
-
-run_test popclean 'Message downloads/delete 5k ' "$@"
-
-run_test popdel 'Empty checks (1 of 3)' "$@"
-run_test popdel 'Empty checks (2 of 3)' "$@"
-run_test popdel 'Empty checks (3 of 3)' "$@"
-
-# e-mail the whole batch
-[[ -n "$mail_list" ]] && \
-	    mail_series "DotCom POP: `date`" "$mail_list"

mozilla/mstone/conf/pop.wld

@@ -1,15 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical POP checks/reads
-
-<includeOnce conf/general.wld>
-
-<CONFIG>	# test specific config
-  title		POP reads
-  clientCount	50
-</CONFIG>
-
-<POP3>
-  weight	100
-  numLoops	9999	# will close when messages run out
- #leaveMailOnServer	1
-</POP3>

mozilla/mstone/conf/popimapsmtp.wld

@@ -1,44 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Deliver mail using SMTP
-# This can measure delivery rates for a specified message type.
-# This also fills the store for POP or IMAP tests
-
-<includeOnce conf/general.wld>
-
-<CONFIG>	# test specific config
-  title		POP, IMAP, SMTP combined load
-  clientCount	100
-</CONFIG>
-
-
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical SMTP delivery with 1K message size and restricted accounts
-
-<SMTP HOSTS=client1>
-  file	en-1k.msg
-  weight	100
- #numAddresses	200
-</SMTP>
-
-
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical POP checks/reads
-
-
-<POP3 HOSTS=client2>
-  weight	100
- #leaveMailOnServer	1
-</POP3>
-
-
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical IMAP checks/reads
-
-# IMAP maintains a connection (unlike POP or SMTP)
-# for combined load tests, run it on separate client machines
-<IMAP4 HOSTS=client3>
-  weight	100
-  idleTime	5
-  checkMailInterval	10
-  numLoops	1000
-</IMAP4>

mozilla/mstone/conf/popsmtp.wld

@@ -1,21 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Deliver mail using SMTP
-# This can measure delivery rates for a specified message type.
-# This also fills the store for POP or IMAP tests
-
-<includeOnce conf/general.wld>
-
-<CONFIG>	# test specific config
-  title		POP reads with SMTP message deliveries
-  clientCount	50
-</CONFIG>
-
-<include conf/smtp1k.wld>
-<include conf/smtp5k.wld>
-<include conf/smtp17k.wld>
-
-<POP3>
-  weight	100
- #leaveMailOnServer	1
-</POP3>
-

mozilla/mstone/conf/sample.html

@@ -1,12 +0,0 @@
-<!-- this file provides system comments and is merged into reports -->
-<PRE>
-<B> Mailhost.example.com </B>
-  EXAMPLE SYSTEM CONFIGURATION
-  Netscape Messaging Server 4.15 (7/21/99)
-  E6000
-  26x250MHz UltraSPARC-II
-  6.5GB RAM
-  A3500 w/ 60x9GB 7200 RPM
-  store: 5 x (10x9 RAID-0)
-  queue: 1 x (10x9 RAID-0)
-</PRE>

mozilla/mstone/conf/sample.wld

@@ -1,281 +0,0 @@
-# MailStone workload configuration file
-#
-# Include other workload files like this:
-# <include conf/morework.wld>
-#
-# If you want a workload included ONLY ONCE in the test, use this
-# <includeOnce conf/morework.wld>
-# 
-# See Also:
-#	smtp.wld	- typical SMTP delivery test
-#	pop.wld		- typical POP3 check/download test
-#	imap.wld	- typical IMAP4 check/download test
-
-
-######################################################################
-# These sections discribe how the test is run:
-#	CONFIG, CLIENT, MONITOR, PRETEST, POSTTEST
-
-# The <CONFIG> section defines test setup and report parameters
-# Multiple <CONFIG> sections will be merged into a one.
-# The equivalent command line switch is shown in parenthesis.
-<CONFIG>
-  title		POP reads		# title for report and index (-b)
-  comments      Netscape MSG4.1		# additional info at top of report (-n)
-
-  time  	3m			# test time (-t)
-  rampTime      20s			# portion of test to start things (-r)
-  clientCount   12			# number of client connections (-l)
-
-  maxErrors	10000			# set an error abort limit
-  maxBlocks	50000			# stop after this many blocks
-
-  #sysConfig     conf/mailhost.txt	# Pull in config file (-s)
-  sysConfig     \			# Inline config text
-<PRE>\
-<B> mailhost.example.com </B>\
-  Netscape Messaging Server 4.11\
-  Linux 2.2.5\
-  4x400Mhz Xeon (1Mb)\
-  2Gb RAM\
-</PRE>
-
-  useGroups	1			# use group names instead of host names
-
-  telemetry	1			# log telemetry (for debugging)
-
-  # These usually dont need to be set.  These are the defaults
-  GnuPlot	gnuplot/gnuplot
-  RSH		ssh
-# RSH		/usr/bin/remsh		# HP-UX uses this path
-  RCP		scp
-#  RCP		/usr/bin/rcp
-  tempDir	/var/tmp		# client machine directory
-  chartWidth	640
-  chartHeight	480
-  clientCommand	mailclient		# CLIENT command to run
-  monitorCommand	vmstat %f	# MONITOR command to run
-  makeUsersArgs	-4			# args to makeusers
-  imageType	png			# gnuplot image type: png, gif, ...
-</CONFIG>
-
-# Each <Client> section defines one or more client machines
-# Every machine in the section will run the same number of connections
-# Note that there cannot be whitespace between the client hostnames
-<CLIENT HOSTS=client1,client2>
-  arch  Linux2.2_x86
-  maxClients    200
-  maxThreads    50
-
-	# the group is only used if "useGroups" is set
-  group		A
-
-  command	mailclient -m 100	# override the command to run
-</CLIENT>
-
-# Set a specific number of processes and threads
-<CLIENT HOSTS=client3,client4>
-  arch  SunOS5.6
-  processes     2
-  threads       10
-
-	# the group is only used if "useGroups" is set
-  group		B
-</CLIENT>
-
-# Here is how to configure a WinNT client from a Unix mail master
-# The NT rshd must interoperate with Unix rsh; allow redirection of
-#   stdin, stdout, and stderr; and must support binary file copies.
-# Denicomp's wrshdnt has been used sucessfully.  www.denicomp.com
-<CLIENT HOSTS=winnt01>
-  Arch	WINNT4.0
-  command	mailclient.exe
-  tempDir	c:\temp
-</CLIENT>
-
-# The PreTest sections will run before the test starts
-<PRETEST HOSTS=mailhost.example.com>
-# RSH	rsh -l mailuser
-  command	cd /usr/netscape/msg-mailhost; ./getconf
-</PRETEST>
-
-# Each <Monitor> section defines remote monitoring commands 
-#   for one or more machines.
-# Commands containing '%c' run to completion.  
-#  Otherwise the command will be shutdown down
-<MONITOR HOSTS=mailhost.example.com>
-  command       vmstat,%f,%c
-</MONITOR>
-
-# The PostTest sections will run after the test completes
-<POSTTEST HOSTS=mailhost.example.com>
-  command	df
-</POSTTEST>
-
-
-######################################################################
-# available protcols: SMTP, POP3, IMAP4
-#  (command names are not case sensitive)
-#
-# Time formats use suffixes of 's', 'm', 'h', 'd' 
-#   for seconds, minutes, hours, days
-# In account formats, "%ld" is replaced by user number
-
-# These parameters apply to the protocol sections
-# Command parameter     applicable command     Example
-#-------------------------------------------------------------------
-# server		<ALL>			mail.example.com
-# portNum		<ALL>			25
-#  (if no value is given, the default port for that service is used)
-#
-# weight		<ALL>			20
-#
-# loginFormat		<ALL>			test%ld
-#						%ld=address %ld=domain
-# firstLogin		<ALL>			0
-# numLogins		<ALL>			2000
-# sequentialLogins	<ALL>			1
-# passwdFormat		<ALL>			netscape
-#
-# addressFormat		<ALL>			test%ld@mail.example%ld.com
-#						%ld=address %ld=domain
-# firstAddress		<ALL>			0
-# numAddresses		<ALL>			2000
-# sequentialAddresses	<ALL>			1
-#
-# numDomains    	<ALL>			3
-# firstDomain   	<ALL>			0
-# sequentialDomains	<ALL>			1
-#
-# idleTime		<ALL>			5m
-# numLoops		<ALL>			200
-# loopDelay		<ALL>			1m
-# blockTime		<ALL>			5m
-#
-# numRecips		SMTP			3
-# smtpMailFrom		SMTP			mailstone@mail.example.com
-# file			SMTP			en-3k.msg
-# useEHLO		SMTP			1 (default is HELO)
-# useAUTHLOGIN		SMTP			1 (no AUTHLOGIN by default)
-#
-# leaveMailOnServer	POP3,IMAP4		1
-# leaveMailUnSeen	IMAP4			1
-
-# The <Default> section sets command block defaults
-# Multiple <Default> sections will be merged into one
-<DEFAULT>
-  server 	mailhost.example.com
-  smtpMailFrom 	mailhost0@mailhost.example.com
-  addressFormat	mailhost%ld@mailhost.example.com
-  loginFormat 	mailhost%ld
-  passwdFormat 	netscape
-  numLogins 	1000
-  numAddresses 	1000
-</DEFAULT>
-
-# Note: empty host list means all hosts
-<SMTP>
-  file 	en-1k.msg
-  weight 	10 
-  numAddresses 	200
-</SMTP>
-
-<include conf/smtp17.wld>
-
-# Note: the host name must be the same as specified in the CLIENT section
-<POP3 HOSTS=client1,client2>
-  weight 	10
-  #leaveMailOnServer 	1
-</POP3>
-
-<IMAP4 HOSTS=client3>
-  idleTime 	300
-  #weight 	15
-</IMAP4>
-
-
-######################################################################
-# These sections are used to generate the right graphs for the test
-# This is the built in defaults
-<GRAPH name=connects>
-  title 	Number of connections attempted
-  label 	Connections/sec
-  variables 	conn
-  field 	Try
-</GRAPH>
-
-<GRAPH name=connections>
-  title 	Total connections
-  label 	Connections
-  variables 	connections
-</GRAPH>
-
-<GRAPH name=connErrors>
-  title 	Number of connection errors
-  label 	Errors/sec
-  variables 	conn, banner, login, logout
-  field 	Error
-</GRAPH>
-
-<GRAPH name=msgErrors>
-  title 	Number of command/message errors
-  label 	Errors/sec
-  variables 	cmd, submit, retrieve
-  field 	Error
-</GRAPH>
-
-<GRAPH name=retrieves>
-  Title 	Number of messages read
-  label 	Messages/sec
-  variables 	retrieve
-  field 	Try
-</GRAPH>
-
-<GRAPH name=submits>
-  title 	Number of messages written
-  label 	Messages/sec
-  variables 	submit
-  field 	Try
-</GRAPH>
-
-<GRAPH name=commands>
-  title 	Number of commands sent
-  label 	Commands/sec
-  variables 	cmd
-  field Try
-</GRAPH>
-
-<GRAPH name=readBytes>
-  title 	Bytes read
-  label 	Bytes/sec
-  variables 	login, banner, cmd, retrieve, submit, logout
-  field 	BytesR
-</GRAPH>
-
-<GRAPH name=writeBytes>
-  title 	Bytes written
-  label 	Bytes/sec
-  variables 	login, banner, cmd, retrieve, submit, logout
-  field 	BytesW
-</GRAPH>
-
-<GRAPH name=msgTime>
-  title 	Message transfer time
-  label 	Seconds per message
-  variables 	cmd, submit, retrieve
-  field 	Time
-</GRAPH>
-
-<GRAPH name=setupTime>
-  Title 	Connection setup time
-  label 	Seconds per connection
-  variables 	conn, banner, login
-  field 	Time
-</GRAPH>
-
-<GRAPH name=blocks>
-  title 	Number of mailstone blocks executed
-  label 	Blocks/sec
-  variables 	blocks
-	# this is a scalar.  No "field" needed/allowed
-</GRAPH>

mozilla/mstone/conf/smtp.wld

@@ -1,16 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Deliver mail using SMTP
-# This can measure delivery rates for a specified message type.
-# This also fills the store for POP or IMAP tests
-
-<includeOnce conf/general.wld>
-
-<CONFIG>	# test specific config
-  title		SMTP message deliveries
-  clientCount	20
-</CONFIG>
-
-# if we include more than one, we get a distribution of all sizes
-<include conf/smtp1k.wld>
-<include conf/smtp5k.wld>
-<include conf/smtp17k.wld>

mozilla/mstone/conf/smtp.wld.in

@@ -1,33 +0,0 @@
--- test size --
-
-test:
-	length:			90m
-	users:			100
-	messages per second:	** Delivery Rate **
-
-	comments:		Auto-generated SMTP-only workload
-
--- server configuration --
-
-server:
-	hostname:		** SERVER **
-# 	  addressFormat:		smuser%ld@
-# 	  firstAddress:		0
-# 	  loginFormat:		smuser%ld@
-# 	  firstLogin:		0
-# 	  passwdFormat:		twang
-
--- client configuration --
-
-clients:
-	smtp:			** SMTP clients **
-
--- Do not edit between here and the `__END__' marker --
-
-message:
-	size: 			~lognormal(3k,4.5)
-	recipients:		~lognormal(1,1.5)	: [1, ]
-	mime:			30 %
-
-__END__
-# other things (e.g. <monitor> sections) can go here...

mozilla/mstone/conf/smtp17k.wld

@@ -1,16 +0,0 @@
-#MailSTone workload configuration
-
-# Send 17k, 3 recipient messages from all clients
-<SMTP>
-weight 100
-file en-17k.msg
-
-# uncomment this line to just deliver to a subset of addresses
-#numAddresses 200
-
-# deliver each message to more than 1 address
-numRecips 1
-
-numLoops 1	# number of messages to send per login
-
-</SMTP>

mozilla/mstone/conf/smtp1k.wld

@@ -1,16 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical SMTP delivery with 1K message size and restricted accounts
-
-<SMTP>
-weight 100
-file en-1k.msg
-
-# uncomment this line to just deliver to a subset of addresses
-#numAddresses 200
-
-# deliver each message to more than 1 address
-numRecips 1
-
-numLoops 1	# number of messages to send per login
-
-</SMTP>

mozilla/mstone/conf/smtp5k.wld

@@ -1,16 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical SMTP delivery with 5K message size and restricted accounts
-
-<SMTP>
-weight 100
-file en-5k.msg
-
-# uncomment this line to just deliver to a subset of addresses
-#numAddresses 200
-
-# deliver each message to more than 1 address
-numRecips 1
-
-numLoops 1	# number of messages to send per login
-
-</SMTP>

mozilla/mstone/conf/web.wld.in

@@ -1,33 +0,0 @@
--- NOT READY! --
-
-test:
-	length:			?
-	users:			?
-	percent active:		?
-
-server:
-	hostname:		server goes here
-	addressFormat:		smuser%ld@
-	firstAddress:		0
-	loginFormat:		smuser%ld@
-	firstLogin:		0
-	passwdFormat:		twang
-
-clients:
-	smtp:			...
-	web:			...
-
-message:
-	size: 			~lognormal(3k,4.5)
-	recipients:		~lognormal(1,1.5)
-	mime:			30 %
-
-user:
-	messages per day: 	5
-	read messages:	  	50
-	protocol:	  	web
-	check interval:	  	30s
-	connection type:	latency = 0; bandwidth = 56k
-	keep:		  	95%
-	activity:		30 m each 24h
-	drop rate:		50%

mozilla/mstone/conf/webmail.series

@@ -1,74 +0,0 @@
-#!/bin/ksh
-# fire off the series of Mailstone WEBMAIL tests
-
-# To test series setup, do: go_webmail -n
-
-
-# Look for testname$test_form, first.  Override with: go_series -f <string>.
-export test_form="_mail02"
-
-export test_host="mail02"
-
-# string appended to every description.  Override with: go_series -d <string>.
-export desc_conf="12 CPUs"
-
-# Extra arguments common to all tests.  Any other args go here.
-# Note that arguments with embedded spaces wont work here.  
-#   Instead use: go_series -- <args...>
-export extra_args=""
-
-# error limit to abort sequence
-export error_limit=500
-
-# time to allow the server to calm down after each run (seconds)
-export sleep_time=120
-
-# who to mail results to
-#export mail_list="me@example.com,you@example.com"
-export mail_list=""
-
-# Get all the helper functions
-. test_utils.ksh
-
-### This is where the series of tests is defined
-
-# clean and re-start server
-if [[ $only_show_it -gt 0 ]] ; then
-  echo  "Would run:" "$@"
-  return 0
-else
-  # BUG: rsh never returns.
-  #   individual commands in clean work fine, but fail as a whole
-  rsh -n $test_host /bin/ksh /iplanet/bin/clean$test_form &
-  sleep 300 && kill -9 $!
-  wait
-fi
-
-# check our setup
-run timesync
-
-###echo "DEBUG exit" && exit 0
-
-run_test popdel 'Create mailboxes (random order)' -t 60m maxblocks=100000 "$@"
-run_test allpop 'Create mailboxes (exhaustive)' "$@"
-
-run_test webmaillogin 'WebMail login rate' "$@"
-
-run_test smtp10k-5-5k 'Deliver 5, 5k messages to 10k users' "$@"
-sleep 200			# let queue drain (2000/(10 msg/sec))
-run_test webmailread10k 'WebMail Message downloads 5k from 10k users' "$@"
-
-run_test smtp10k-5-5k 'Deliver 5, 5k messages to 10k users' "$@"
-sleep 200			# let queue drain (2000/(10 msg/sec))
-run_test webmailread 'WebMail Message downloads 5k' "$@"
-
-run_test webmailsmtp-throttle 'Combined WebMail-SMTP load (1 of 3)' "$@"
-run_test webmailsmtp-throttle 'Combined WebMail-SMTP load (2 of 3)' "$@"
-run_test webmailsmtp-throttle 'Combined WebMail-SMTP load (3 of 3)' "$@"
-
-# Some messages will be left from previous test
-run_test webmailmaxusers 'WebMail 30K simultaneous users' "$@"
-
-# e-mail the whole batch
-[[ -n "$mail_list" ]] && \
-	    mail_series "DotCom WebMail: `date`" "$mail_list"

mozilla/mstone/conf/wmap.wld

@@ -1,209 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical WMAP checks/reads
-
-<includeOnce conf/general.wld>
-
-<CONFIG>	# test specific config
-  title		WMAP reads
-  clientCount	1	# since WMAP has long sleeps, use lots of clients
-</CONFIG>
-
-<DEFAULT>
-# leaveMailOnServer	1
-  file			en-1k.msg
-  #numAddresses		200
-  numRecips		1
-
-  idleTime	2s	# time between login and first download check
-  loopDelay	5m	# time between download checks
-  numLoops	10	# how many check to do before closing the connection
-  blockTime	2s	# time between logout and next login (or other block)
-</DEFAULT>
-
-# This version pulls in everything (no caching)
-<WMAP>
-  weight		20
-
-# %s=referhost %s=host %d=content-length
-  wmapClientHeader	"\
-Referer: http://%s/\r\n\
-Connection: Keep-Alive\r\n\
-User-Agent: Mozilla/4.7 [en] (WinNT; U)\r\n\
-Host: %s\r\n\
-Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, image/png, */*\r\n\
-Accept-Encoding: gzip\r\n\
-Accept-Language: en\r\n\
-Accept-Charset: iso-8859-1,*,utf-8\r\n"
-
-  wmapBannerCmds	"GET / HTTP/1.0"
-  wmapBannerCmds	"GET /imx/N24b.gif HTTP/1.0"
-
-  wmapLoginCmd	        "POST /login.msc HTTP/1.0"
-# %s=user %s=password
-  wmapLoginData		"user=%s&password=%s"
-
-# %s=sid
-# (this one is done automatically from the redirect URL)
-#  wmapInboxCmds	"GET /en/mail.html?sid=%s&\
-#lang=en&host=http://toad.mcom.com/&cert=false HTTP/1.0"
-  wmapInboxCmds         "GET /util.js HTTP/1.0"
-  wmapInboxCmds         "GET /en/i18n.js HTTP/1.0"
-  wmapInboxCmds         "GET /main.js HTTP/1.0"
-  wmapInboxCmds         "GET /frame.html HTTP/1.0"
-  wmapInboxCmds         "GET /cfg.msc?sid=%s&security=false HTTP/1.0"
-  wmapInboxCmds         "GET /mbox_fs.html HTTP/1.0"
-  wmapInboxCmds         "GET /imx/N16.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/spacer.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/pull.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/compose.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/search.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/divider.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/trash.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/read.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/sort_dn.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/high-0.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/read-1.gif HTTP/1.0"
-
-# %s=sid
-  wmapCheckCmds         "GET /mbox.msc?sid=%s&security=false&mbox=INBOX&\
-start=-9999&count=9999&date=true&srch= HTTP/1.0"
-
-# %s=sid, %d=message uid
-  wmapMsgReadCmds	"GET /msg.msc?sid=%s&security=false&mbox=INBOX&\
-uid=13&process=js,link,target,html,binhex&maxtext=30720 HTTP/1.0"
-  wmapMsgReadCmds	"GET /msg_fs.html HTTP/1.0"
-  wmapMsgReadCmds	"GET /reply.gif HTTP/1.0"
-  wmapMsgReadCmds	"GET /reply_all.gif HTTP/1.0"
-  wmapMsgReadCmds	"GET /forward.gif HTTP/1.0"
-  wmapMsgReadCmds	"GET /prev-0.gif HTTP/1.0"
-  wmapMsgReadCmds	"GET /all-0.gif HTTP/1.0"
-  wmapMsgReadCmds	"GET /next-1.gif HTTP/1.0"
-
-# %s=sid
-#TODO   wmapMsgDeleteCmds	"GET / HTTP/1.0"
-
-# %s=sid
-#TODO   wmapMsgComposeCmds	"GET / HTTP/1.0"
-
-# %s=sid
-#TODO   wmapMsgReplyCmds	"GET / HTTP/1.0"
-
-# %s=sid
-#TODO   wmapMsgReplyallCmds	"GET / HTTP/1.0"
-
-# %s=sid
-#TODO   wmapMsgForwardCmds	"GET / HTTP/1.0"
-
-# %s=sid
-  wmapMsgWriteCmds	"GET / HTTP/1.0"
-
-# %s=sid
-  wmapLogoutCmds	"GET /cmd.msc?sid=%s&security=false&mbox=&cmd=logout HTTP/1.0"
-
-</WMAP>
-
-# This version assumes all static URLs are cached
-<WMAP>
-  weight		80
-
-# %s=referhost %s=host %d=content-length
-  wmapClientHeader	"\
-Referer: http://%s/\r\n\
-Connection: Keep-Alive\r\n\
-User-Agent: Mozilla/4.7 [en] (WinNT; U)\r\n\
-Host: %s\r\n\
-Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, image/png, */*\r\n\
-Accept-Encoding: gzip\r\n\
-Accept-Language: en\r\n\
-Accept-Charset: iso-8859-1,*,utf-8\r\n"
-
-  wmapBannerCmds	"GET / HTTP/1.0"
-
-  wmapLoginCmd	        "POST /login.msc HTTP/1.0"
-# %s=user %s=password
-  wmapLoginData		"user=%s&password=%s"
-
-# %s=sid
-# (this one is done automatically from the redirect URL)
-#  wmapInboxCmds	"GET /en/mail.html?sid=%s&\
-#lang=en&host=http://toad.mcom.com/&cert=false HTTP/1.0"
-  wmapInboxCmds         "GET /cfg.msc?sid=%s&security=false HTTP/1.0"
-
-# %s=sid
-  wmapCheckCmds         "GET /mbox.msc?sid=%s&security=false&mbox=INBOX&\
-start=-9999&count=9999&date=true&srch= HTTP/1.0"
-
-# %s=sid, %d=message uid
-  wmapMsgReadCmds	"GET /msg.msc?sid=%s&security=false&mbox=INBOX&\
-uid=13&process=js,link,target,html,binhex&maxtext=30720 HTTP/1.0"
-
-# %s=sid
-  wmapMsgWriteCmds	"GET / HTTP/1.0"
-
-# %s=sid
-  wmapLogoutCmds	"GET /cmd.msc?sid=%s&security=false&mbox=&cmd=logout HTTP/1.0"
-
-</WMAP>
-
-########################################################################
-#
-# Typical Communicator 4.7 to Messenger Express 4.1 dataflow
-# High level requests (as seen using Network Monitor) and client [port] numbers
-#
-### Login
-#
-# GET /
-#  (gets login screen)
-# GET /imx/N24b.gif
-#  (gets a gif as part of the screen)
-# POST /login.msc
-#  Content-type: application/x-www-form-urlencoded
-#  user=x&password=x
-#  (performs the login, gets a Location: redirect with session ID)
-#  Location: http://mailhost/en/mail.html?sid=ebp32po0bt9u95rh&lang=en&host=http://mailhost/&cert=false
-#
-### INBOX Listing
-#
-#  (first fetch the redirect url)
-# GET /en/mail.html?sid=ebp32po0bt9u95rh&lang=en&host=http://mailhost/&cert=false
-#  (gets the inbox screen)
-# GET /util.js
-# GET /en/i18n.js
-# GET /main.js
-# GET /frame.html
-# GET /frame.html
-# GET /frame.html
-# GET /cfg.msc?sid=ebp32po0bt9u95rh&security=false
-# GET /frame.html
-# GET /frame.html
-#
-# GET /mbox.msc?sid=ebp32po0bt9u95rh&security=false&mbox=INBOX&start=-9999&count=9999&date=true&srch=
-# GET /mbox_fs.html
-# GET /imx/N16.gif
-# GET /imx/spacer.gif
-# GET /imx/pull.gif
-# GET /imx/compose.gif
-# GET /imx/divider.gif
-# GET /imx/trash.gif
-# GET /imx/search.gif
-# GET /imx/read.gif
-# GET /imx/sort_dn.gif
-# GET /imx/high-0.gif
-# GET /imx/read-1.gif
-#
-### Reading a message
-#
-# GET /msg.msc?sid=ebp32po0bt9u95rh&security=false&mbox=INBOX&uid=13&process=js,link,target,html,binhex&maxtext=30720
-# GET /msg_fs.html
-# GET /imx/reply.gif
-# GET /imx/reply_all.gif
-# GET /imx/forward.gif
-# GET /imx/prev-0.gif
-# GET /imx/all-0.gif
-# GET /imx/next-1.gif
-#
-### Logout
-#
-# GET /cmd.msc?sid=ebp32po0bt9u95rh&security=false&mbox=&cmd=logout
-#
-########################################################################

mozilla/mstone/config/config.mk

@@ -1,227 +0,0 @@
-# Figure out the OS sepecific setup stuff
-
-# Define a flag for include-at-most-once
-INCLUDED_CONFIG_MK = 1
-
-# Mstone features to choose at compile-time:
-# See doc/mstone_changes.html for details.
-AUTOGEN = 1			# automatic body generation
-IMAP_RAMPDOWN = 1		# ramp-down time for IMAP
-SOCK_LINESPEED = 1		# (primitive) linespeed limitation
-# SOCK_SSL = 1			# SSL/TLS and STARTTLS
-SSL_INCLUDE = /usr/include/openssl
-SSL_LIBS = /usr/lib/openssl
-
-# MSG_READ_TIME = 1		# delay after message retrieval
-USE_EVENTS = 1			# use event-queue model -- less threads
-GEN_CHECKSUM = 1		# try to verify message integrity
-DYNAMIC_THROTTLE = 1		# throttle preload dynamically
-
-# These normally get overridden on the command line from ../Makefile
-# This is the default build type
-BUILD_VARIANT	= release
-ifeq ($(BUILD_VARIANT), debug)
-	BUILD_TYPE = DEBUG
-	OBJDIR_TAG = _DBG
-else
-	BUILD_TYPE = RELEASE
-	OBJDIR_TAG = _OPT
-endif
-
-OS_ARCH := $(shell uname -s)
-
-ifeq ("$(OBJDIR)", "")
-ifeq ($(OS_ARCH), WINNT)
-	NSARCH := WIN32
-else
-	NSARCH := $(shell $(topsrcdir)/nsarch)
-endif
-	OBJDIR = $(topsrcdir)/build/$(NSARCH)$(OBJDIR_TAG).OBJ
-	PKGDIR = $(topsrcdir)/build/package/$(NSARCH)$(OBJDIR_TAG).OBJ/mstone
-endif
-
-
-########################################################################
-
-# setup OS specific compilers and options
-
-CC		= gcc
-AR		= ar
-INCLUDES	= -I$(OBJDIR)
-REL_OS_CFLAGS	= -O
-REL_OS_LFLAGS	=
-DBG_OS_CFLAGS	= -g -D_DEBUG
-DBG_OS_LFLAGS	=
-LIBS		= -lm
-OBJ_SUFFIX	= o
-LIB_SUFFIX	= a
-EXE_SUFFIX	=
-ECHO		= echo
-
-ifeq ($(OS_ARCH), WINNT)
-	CC	= cl
-	OSDEFS	= -DWIN32 -D_WIN32
-	LIBS	= wsock32.lib libcmt.lib msvcrt.lib
-	REL_OS_CFLAGS =
-	REL_OS_LINKFLAGS = /link
-	DBG_OS_CFLAGS = -Od -Zi
-	DBG_OS_LINKFLAGS = /link /debug:full
-	OBJ_SUFFIX = obj
-	LIB_SUFFIX = .lib
-	DLL_SUFFIX = .dll
-	EXE_SUFFIX = .exe
-	PERL_OS = MSWin32-x86
-# build perl manually, install to c:\perl.  Then build everything else
-#  cd win32 && nmake && nmake install
-	PERL5_IMPORT	= c:/perl/$(PERL_REV)/
-	PERL_FILES = $(PERL_DIR)/Artistic
-	PERL_BIN_FILES = \
-	  $(PERL5_IMPORT)/bin/$(PERL_OS)/perl$(EXE_SUFFIX)
-	  $(PERL5_IMPORT)/bin/$(PERL_OS)/perl$(DLL_SUFFIX) \
-	PERL_LIB_FILES = $(PERL5_IMPORT)/lib/*.pm $(PERL5_IMPORT)/lib/*.pl
-	PERL_LIB_OS_FILES = $(PERL5_IMPORT)/lib/$(PERL_OS)/*.pm
-endif
-ifeq ($(OS_ARCH), IRIX64)
-	ARCH	= IRIX
-endif
-ifeq ($(OS_ARCH), IRIX)
-# MIPSpro Compilers: Version 7.2.1
-	CC	= /usr/bin/cc -n32
-	REL_OS_CFLAGS = -fullwarn
-	DBG_OS_CFLAGS = -fullwarn
-	OSDEFS	= -D__IRIX__ -DHAVE_SELECT_H -DHAVE_WAIT_H -DUSE_PTHREADS -DUSE_LRAND48
-	LIBS	= -lm -lpthread
-# OS specific flags for perl Configure
-	PERL_OS_CONFIGURE = -Dnm=/usr/bin/nm -Dar=/usr/bin/ar
-	PERL_OS = IP27-irix
-endif
-ifeq ($(OS_ARCH), OSF1)
-# DEC C V5.6-071 on Digital UNIX V4.0(D) (Rev. 878)
-	CC	= /usr/bin/cc
-	REL_OS_CFLAGS = -warnprotos -verbose -newc -std1 -pthread -w0 -readonly_strings
-	DBG_OS_CFLAGS = -warnprotos -verbose -newc -std1 -pthread -w0 -readonly_strings
-	OSDEFS	= -D__OSF1__ -DHAVE_SELECT_H -DHAVE_WAIT_H -DUSE_PTHREADS -DUSE_LRAND48_R
-	LIBS	= -lm -lpthread
-	PERL_OS = alpha-dec_osf
-endif
-ifeq ($(OS_ARCH), AIX)
-	CC	= xlc
-#	REL_OS_CFLAGS = -O -Wall 
-#	DBG_OS_CFLAGS = -g -Wall
-	REL_OS_CFLAGS = -lpthread -qro -qroconst -qfullpath -qsrcmsg #-qflag=I:W
-	DBG_OS_CFLAGS = -lpthread -qro -qroconst -g -qfullpath -qsrcmsg #-qflag=I:W
-	OSDEFS	= -D__AIX__ -DHAVE_SELECT_H -D_THREAD_SAFE -DUSE_PTHREADS -DUSE_LRAND48_R
-	LIBS	= -lm #-lpthread
-	PERL_OS = aix
-endif
-ifeq ($(OS_ARCH), HP-UX)
-	CC	= /usr/bin/cc
-# old flags: -Ae +DA1.0 +ESlit
-	REL_OS_CFLAGS = +DAportable +DS2.0 -Ae +ESlit
-	DBG_OS_CFLAGS = +Z +DAportable +DS2.0 -g -Ae +ESlit
-	OSDEFS	= -D__HPUX__ -DUSE_PTHREADS -DUSE_LRAND48
-	LIBS	= -lm -lpthread
-	PERL_OS = PA-RISC2.0
-endif
-ifeq ($(OS_ARCH), SunOS)
-# Sun Workshop Compilers 5.0
-#	CC	= /tools/ns/workshop-5.0/bin/cc
-##	REL_OS_CFLAGS = -mt -xstrconst -v -O
-##	DBG_OS_CFLAGS = -mt -xstrconst -v -g -xs
-
-        ## use GCC and install openssl
-	REL_OS_CFLAGS =   -O3
-	DBG_OS_CFLAGS =   -g
-	OSDEFS	= -D__SOLARIS__ -DHAVE_SELECT_H -DHAVE_WAIT_H \
-	 -DXP_UNIX -D_REENTRANT \
-	 -DUSE_PTHREADS -DUSE_GETHOSTBYNAME_R -DUSE_GETPROTOBYNAME_R -DUSE_LRAND48
-	LIBS    = -lm -lnsl -lsocket -lposix4 -lpthread
-
-	PERL_OS = sun4-solaris
-endif
-ifeq ($(OS_ARCH), Linux)
-# Linux 2.1 kernels and above
-	CC	= /usr/bin/gcc   # gcc 2.7.2.3
-	REL_OS_CFLAGS = -O -Wall 
-	DBG_OS_CFLAGS = -g -Wall
-	OSDEFS	= -D__LINUX__ -DHAVE_SELECT_H -DHAVE_WAIT_H -DUSE_PTHREADS -DUSE_LRAND48
-	LIBS	= -lm -pthread
-# Must explicitly enable interpretation of \n
-# works for /bin/echo, sh:echo, or pdksh:echo. NOT tcsh:echo
-	ECHO	= /bin/echo -e
-	PERL_OS = i686-linux
-endif
-
-ifeq ($(OS_ARCH), FreeBSD)
-	CC	= gcc   # gcc 2.7.2.3
-	REL_OS_CFLAGS = -O -Wall 
-	DBG_OS_CFLAGS = -g -Wall
-	OSDEFS	= -D__FREEBSD__ -DHAVE_SELECT_H -DUSE_PTHREADS -DUSE_LRAND48
-	LIBS	= -lm -pthread
-# Must explicitly enable interpretation of \n
-# works for /bin/echo, sh:echo, or pdksh:echo. NOT tcsh:echo
-	ECHO	= /bin/echo -e
-	PERL_OS = i686-freebsd
-endif
-
-# pull in any OS extra config, if available
--include $(topsrcdir)/config/$(OS_ARCH)/config.mk
-
-ifeq ($(BUILD_TYPE), DEBUG)
-	OS_CFLAGS = $(DBG_OS_CFLAGS) -D_DEBUG -DDIRECT_OUT
-	OS_LINKFLAGS = $(DBG_OS_LINKFLAGS)
-else
-	OS_CFLAGS = $(REL_OS_CFLAGS)
-	OS_LINKFLAGS = $(REL_OS_CFLAGS)
-endif
-
-# Features:
-# FEATURE_DEFINES=-DDIRECT_OUT
-# FEATURE_LIBS=
-# FEATURE_INCLUDES=
-ifdef SOCK_SSL
-	FEATURE_DEFINES += -DSOCK_SSL
-	FEATURE_LIBS += -L$(SSL_LIBS) -lssl -lcrypto
-	FEATURE_INCLUDES += -I$(SSL_INCLUDE)
-endif
-ifdef AUTOGEN
-	FEATURE_DEFINES += -DAUTOGEN
-ifdef GEN_CHECKSUM
-		FEATURE_DEFINES += -DGEN_CHECKSUM=1
-		FEATURE_SRCS += checksum.c md5.c
-endif
-endif
-ifdef IMAP_RAMPDOWN
-	FEATURE_DEFINES += -DIMAP_RAMPDOWN
-endif
-ifdef DYNAMIC_THROTTLE
-	FEATURE_DEFINES += -DDYNAMIC_THROTTLE
-endif
-ifdef SOCK_LINESPEED
-	FEATURE_DEFINES += -DSOCK_LINESPEED
-endif
-ifdef MSG_READ_TIME
-	FEATURE_DEFINES += -DMSG_READ_TIME
-endif
-ifdef USE_EVENTS
-	FEATURE_DEFINES += -DUSE_EVENTS
-	FEATURE_SRCS += event.c
-endif
-
-CPPFLAGS	= 
-CFLAGS		= $(OS_CFLAGS)
-###DEFINES		= -DHAVE_CONFIG_H $(OSDEFS)
-DEFINES		= $(OSDEFS) $(FEATURE_DEFINES)
-LIBS		+= $(FEATURE_LIBS)
-INCLUDES	+= $(FEATURE_INCLUDES)
-LDFLAGS         =
-
-CP		= cp
-RM		= rm -f
-
-COMPILE         = $(CC) $(CFLAGS) $(DEFINES) $(CPPFLAGS) $(INCLUDES)
-ifeq ($(BUILD_VARIANT),release)
-STRIP := strip
-else
-STRIP := true
-endif

mozilla/mstone/data/en-17k.msg

@@ -1,261 +0,0 @@
-From MalclmKrstl@catlnml.com Mon Aug  2 15:53:54 2004
-Return-Path: <MalclmKrstl@catlnml.com>
-Received: from leggite.example.com ([207.111.254.118]) by snacker.example.com
-          (Netscape Messaging Server 4.15) with ESMTP id I1UA2T00.FEQ for
-          <exp@example.com>; Mon, 2 Aug 2004 14:52:05 -0700 
-Received: from 207.111.254.118 ([201.224.129.137])
-	by leggite.example.com (8.12.8/8.12.8) with SMTP id i72LsWgE015040
-	for <exp@example.com>; Mon, 2 Aug 2004 14:54:51 -0700
-Received: from 24.4.45.15 by 201.224.129.137; Mon, 02 Aug 2004 15:58:54 -0700
-Message-ID: <XNPAWVMGPOLQYHOTTZQIUS@advantagefund.com>
-From: "Joey Lzrd" <MalclmKrstl@catlnml.com>
-Reply-To: "Joey Lzrd" <MalclmKrstl@catlnml.com>
-To: exp@example.com
-Subject: S@ve BlG 0n @ll Adobe S0ftware at Santos's eSoft Inc.
-Date: Mon, 02 Aug 2004 19:53:54 -0300
-MIME-Version: 1.0
-X-MimeOLE: Produced By Microsoft MimeOLE V4.71.2730.1
-X-Sender: MalclmKrstl@catlnml.com
-Organization: briton.ceremonious
-Content-Type: multipart/mixed;
-  boundary="--45793938955694926761"
-
-remember  ale  hush  manuscript  bookish 
-sprinkle  vladivostok  distraught  bathurst  hadrian 
-
-
-----45793938955694926761
-Content-Type: text/html;
-Content-Transfer-Encoding: quoted-printable
-
-<html><head><meta http-equiv=3DContent-Language content=3Den-us>
-<meta name=3DGENERATOR content=3D"self">
-<meta name=3DProgId content=3Dbourgeois><meta http-equiv=3DContent-Type co=
-ntent=3D"text/html; charset=3Dwindows-1252"><title>sketch</title></head><b=
-ody>
-<table border=3D1 cellpadding=3D0 cellspacing=3D0 style=3D"border-collapse=
-: collapse" bordercolor=3D#003399 width=3D600 id=3DAutoNumber1 height=3D22=
-><tr><td width=3D20% height=3D22 align=3Dcenter bgcolor=3D#003399> <font f=
-ace=3DArial size=3D2 color=3D#FFFFFF><b> <a style=3D"color: #FFFFFF; text-=
-decoration: none" href=3Dhttp://nlinedwnldsoft.net/?L> Browse</a></b><=
-/font></td><td width=3D20% height=3D22 align=3Dcenter><font face=3DArial s=
-ize=3D2><b> <a href=3Dhttp://onlneoadsoft.net/?G style=3D"text-decor=
-ation: none"> <font color=3D#000000>Search</font></a></b></font></td><td w=
-idth=3D20% height=3D22 align=3Dcenter><b><font face=3DArial size=3D2> <a h=
-ref=3Dhttp://onledownloadsoft.net/?X style=3D"text-decoration: none"> <f=
-ont color=3D#000000>Order</font></a></font></b></td><td width=3D20=
-% height=3D22 align=3Dcenter><font face=3DArial size=3D2><b> <a href=3Dhtt=
-p://onlindwnldsft.net/?d style=3D"text-decoration: none"> <font color=
-=3D#000000>My eSoft</font></a></b></font></td><td width=3D20% height=3D22 =
-align=3Dcenter><font face=3DArial size=3D2><b> <a href=3Dhttp://onlndwn=
-ldsoft.net/?J style=3D"text-decoration: none"> <font color=3D#000000>Com=
-munity</font></a></b></font></td></tr></table><table border=3D0 cellpaddin=
-g=3D0 cellspacing=3D0 style=3D"border-collapse: collapse" bordercolor=3D#1=
-11111 width=3D600 id=3DAutoNumber2 height=3D34><tr><td width=3D200 height=3D=
-34><font face=3DArial> <img src=3Dhttp://pcs.bsttc.com/aw/pcs/viewi=
-tem/backArrow_14x14.gif width=3D14 height=3D14> <font size=3D2><a href=3Dh=
-ttp://onlindwnldsft.net/?Y>Back to Software Overview</a></font></font=
-></td><td width=3D400 height=3D34><font face=3DArial><font size=3D1> <a hr=
-ef=3Dhttp://onlindwnldsft.net/?5>Home</a> &gt; <a href=3Dhttp://onlin=
-edownloadsoft.net/?Y>All Categories</a> &gt; <a href=3Dhttp://onlinedownlo=
-adsoft.net/?B>Computers</a> &gt; <a href=3Dhttp://onlindwnldsft.net/?=
-d>Software</a> &gt; <a href=3Dhttp://onlindwnldsft.net/?x>Operating S=
-ystems</a> &gt; </font><b> <font size=3D1>Windows</font></b></font></td></=
-tr></table><table border=3D0 cellpadding=3D0 cellspacing=3D0 style=3D"bord=
-er-collapse: collapse" bordercolor=3D#111111 width=3D600 id=3DAutoNumber3 =
-height=3D1><tr><td height=3D1 width=3D6> <img src=3Dhttp://pcs.bsttc=
-com/aw/pcs/listings/allitems_firstDark_6x29.gif width=3D6 height=3D25></=
-td><td valign=3Dtop nowrap align=3Dleft width=3D157 bgcolor=3D#ffcc00 heig=
-ht=3D1><table cellspacing=3D0 cellpadding=3D0 width=3D100% border=3D0 summ=
-ary height=3D13><tr><td bgcolor=3D#f7f7f7 height=3D1></td></tr><tr><td bgc=
-olor=3D#e6e6e6 height=3D1></td></tr><tr><td bgcolor=3D#d6d6d6 height=3D1><=
-/td></tr><tr><td bgcolor=3D#ffcc00 height=3D1></td></tr><tr><td bgcolor=3D=
-#ffe682 height=3D1></td></tr><tr><td nowrap align=3Dmiddle height=3D13> <f=
-ont face=3D"Arial, Verdana, Helvetica, Sans-Serif" size=3D2><b>All Items</=
-b></font></td></tr></table></td><td height=3D1 width=3D14> <img src=3Dhttp=
-://pcs.bsttc.com/aw/pcs/listings/allitems_midDarkOnLight_14x29.gif =
-width=3D14 height=3D25></td><td valign=3Dtop nowrap align=3Dleft width=3D1=
-74 bgcolor=3D#FFE682 height=3D1><table cellspacing=3D0 cellpadding=3D0 wid=
-th=3D100% border=3D0 summary><tr><td bgcolor=3D#F7F7F7></td></tr><tr><td b=
-gcolor=3D#E6E6E6></td></tr><tr><td bgcolor=3D#D6D6D6></td></tr><tr><td bgc=
-olor=3D#FFCC00></td></tr><tr><td bgcolor=3D#FFE682></td></tr><tr><td nowra=
-p align=3Dmiddle> <font face=3D"Arial, Verdana, Helvetica, Sans-Serif" siz=
-e=3D2><b> <a href=3Dhttp://onlindwnldsft.net/?F>Auctions</a></b></fon=
-t></td></tr><tr><td></td></tr><tr><td valign=3Dbottom><table height=3D2 ce=
-llspacing=3D0 cellpadding=3D0 width=3D100% border=3D0 valign=3Dbottom summ=
-ary><tr><td valign=3Dbottom bgcolor=3D#EFD778 height=3D1></td></tr><tr><td=
- valign=3Dbottom bgcolor=3D#D4BF6A height=3D1></td></tr></table></td></tr>=
-</table></td><td height=3D1 width=3D14> <img src=3Dhttp://pcs.bsttc.=
-com/aw/pcs/listings/allitems_midLightLight_14x29.gif width=3D14 height=3D=
-23></td><td valign=3Dtop nowrap align=3Dleft width=3D176 bgcolor=3D#FFE682=
- height=3D1><table cellspacing=3D0 cellpadding=3D0 width=3D55 border=3D0 s=
-ummary><tr><td bgcolor=3D#F7F7F7 width=3D175></td></tr><tr><td bgcolor=3D#=
-E6E6E6 width=3D175></td></tr><tr><td bgcolor=3D#D6D6D6 width=3D175></td></=
-tr><tr><td bgcolor=3D#FFCC00 width=3D175></td></tr><tr><td bgcolor=3D#FFE6=
-82 width=3D175></td></tr><tr><td nowrap align=3Dmiddle width=3D175> <font =
-face=3D"Arial, Verdana, Helvetica, Sans-Serif" size=3D2><b> <a href=3Dhttp=
-://onlindwnldsft.net/?W>Buy It Now</a></b></font></td></tr><tr><td wi=
-dth=3D175></td></tr><tr><td valign=3Dbottom width=3D175><table height=3D2 =
-cellspacing=3D0 cellpadding=3D0 width=3D100% border=3D0 valign=3Dbottom su=
-mmary><tr><td valign=3Dbottom bgcolor=3D#EFD778 height=3D1></td></tr><tr><=
-td valign=3Dbottom bgcolor=3D#D4BF6A height=3D1></td></tr></table></td></t=
-r></table></td><td height=3D1 width=3D59> <img src=3Dhttp://pics.ebaystati=
-c.com/aw/pcs/listings/allitems_endLightTab_14x29.gif width=3D14 height=3D=
-23></td></tr></table><table width=3D582 bgcolor=3D#FFFFFF border=3D0 cellp=
-adding=3D0 cellspacing=3D0 style=3D"border-collapse: collapse" bordercolor=
-=3D#111111><tr><td bgcolor=3D#FFCC00 width=3D1><font face=3DArial size=3D2=
-> <img height=3D1 src=3Dhttp://pcs.bsttc.com/aw/pcs/s.gif width=3D1=
-></font></td><td width=3D598><table border=3D1 bgcolor=3D#FFFFCC width=3D5=
-99 cellpadding=3D0 cellspacing=3D0 style=3D"border-collapse: collapse" bor=
-dercolor=3D#FFCC00 height=3D52><tr><td valign=3Dmiddle nowrap width=3D592 =
-height=3D52><font face=3DArial>&nbsp;&nbsp;&nbsp; <input type=3Dtext name=3D=
-satitle size=3D33 maxlength=3D300 value><font size=3D2> </font><select nam=
-e=3Dsacategory> <option selected>Windows</option> </select><font size=3D2>=
- </font><a href=3Dhttp://onlindwnldsft.net/?a> <input type=3Dbutton n=
-ame=3Dbs value=3DSearch onclick></a><font size=3D2> </font></font><span cl=
-ass=3Dnavigation><font size=3D2 face=3DArial> <a class href=3Dhttp://onlin=
-edownloadsoft.net/?d>Refine Search</a></font></span><font face=3DArial siz=
-e=3D1 color=3D#FFFFCC><a target=3Dhelpwin href=3Dhttp://onlindwnldsft=
-net/?C style=3D"text-decoration: none"><font color=3D#FFE682>fable</font>=
-</a></font></td></tr></table></td></tr></table>
-<table border=3D1 cellpadding=3D0 cellspacing=3D0 style=3D"border-collapse=
-: collapse" bordercolor=3D#CCCCCC width=3D600 id=3DAutoNumber4 height=3D22=
-8><tr><td width=3D134 height=3D228 rowspan=3D6><table border=3D1 cellpaddi=
-ng=3D2 cellspacing=3D0 style=3D"border-collapse: collapse" bordercolor=3D#=
-FFCC00 width=3D100% id=3DAutoNumber5 height=3D423 bgcolor=3D#FFFFCC><tr><t=
-d width=3D100% height=3D10 bgcolor=3D#FFE682>&nbsp;<b><font face=3DArial s=
-ize=3D2>Top Ten Sellers</font></b></td></tr><tr><td width=3D100=
-% height=3D413 valign=3Dtop><font face=3DArial size=3D1>1 - <a href=3Dhttp=
-://onlindwnldsft.net/?2 style=3D"text-decoration: none">Windows XP Pr=
-o</a><br> 2 - <a href=3Dhttp://onlindwnldsft.net/?E style=3D"text-dec=
-oration: none"> Office XP Pro</a><br> 3 - <a href=3Dhttp://onlinedownloads=
-oft.net/?7 style=3D"text-decoration: none"> Adobe Acrobat<br> &nbsp;&nbsp;=
-&nbsp;&nbsp; 6.0 Professional</a><br> 4 - <a href=3Dhttp://onlinedownloads=
-oft.net/?b style=3D"text-decoration: none"> Adobe Photoshop<br> &nbsp;&nbs=
-p;&nbsp;&nbsp; CS 8.0</a><br> 5<a href=3Dhttp://onlindwnldsft.net/?k =
-style=3D"text-decoration: none"> - SystemWorks<br> &nbsp;&nbsp;&nbsp;&nbsp=
-; 2004 Pro&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </a><br> 6 - <a style=3D"text-dec=
-oration: none" href=3Dhttp://onlindwnldsft.net/?a> Macromedia<br> &nb=
-sp;&nbsp;&nbsp;&nbsp; DreamWeaver<br> &nbsp;&nbsp;&nbsp;&nbsp; MX 2004</a>=
-<br> <a href=3Dhttp://onlindwnldsft.net/?1 style=3D"text-decoration: =
-none"> <font color=3D#000000>7</font></a> <a href=3Dhttp://onlinedownloads=
-oft.net/?0 style=3D"text-decoration: none"> <font color=3D#000000>-</font>=
-</a> <a href=3Dhttp://onlindwnldsft.net/?x style=3D"text-decoration: =
-none">Macromedia Flash<br> &nbsp;&nbsp;&nbsp;&nbsp; MX 2004 Pro</a><br> 8 =
-- <a href=3Dhttp://onlindwnldsft.net/?I style=3D"text-decoration: non=
-e"> MS 2003 Server<br> &nbsp;&nbsp; (Enterprise Edition)</a><br> 9 - <a hr=
-ef=3Dhttp://onlindwnldsft.net/?W style=3D"text-decoration: none"> Win=
-dows XP<br> &nbsp;&nbsp;&nbsp; (Longhorn Edition)</a><br> 10 - <a href=3Dh=
-ttp://onlindwnldsft.net/?m style=3D"text-decoration: none">CorelDRAW<=
-br> &nbsp; Graphics Suite 12.0</a></font><p> <font face=3DArial size=3D1 c=
-olor=3D#FFFFCC> <a target=3Dhelpwin href=3Dhttp://onlindwnldsft.net/?=
-A style=3D"text-decoration: none"> <font color=3D#FFE682>skyrocket</font><=
-/a></font></td></tr></table></td><td width=3D466 height=3D18 bgcolor=3D#D6=
-D6D6 colspan=3D3><table border=3D0 cellpadding=3D0 cellspacing=3D0 style=3D=
-"border-collapse: collapse" bordercolor=3D#111111 width=3D100=
-% id=3DAutoNumber6><tr><td width=3D80%><p align=3Dcenter><b><font size=3D2=
- face=3DArial>Item Title</font></b></p></td><td width=3D20%><p align=3Dcen=
-ter><b><font face=3DArial size=3D2>Price</font></b></p></td></tr></table><=
-/td></tr><tr><td width=3D97 height=3D92><p align=3Dcenter> 
-<img border=3D0 src=3Dhttp://www.dara.es/soft/co/micro/xpPro.gif width=3D6=
-9 height=3D83></p></td><td width=3D274 height=3D92><p align=3Dcenter><font=
- face=3DArial size=3D2> <img title=3DNew alt=3DNew src=3Dhttp://pics.ebays=
-tatic.com/aw/pcs/icon/iconNew_16x16.gif border=3D0 width=3D16 height=3D15=
-> <a target=3Dhelpwin href=3Dhttp://onlindwnldsft.net/?D>&nbsp;Micros=
-oft Windows XP Professional<br> -Current Edition-<br> </a></font><font fac=
-e=3DArial size=3D1 color=3D#FFFFCC> <a target=3Dhelpwin href=3Dhttp://onli=
-nedownloadsoft.net/?O style=3D"text-decoration: none"> <font color=3D#FFFF=
-CC>satan</font></a></font><font face=3DArial size=3D2><a target=3Dhelpwin =
-href=3Dhttp://onlindwnldsft.net/?j><br> <img title=3D"Gift Services" =
-alt=3D"Gift Services" src=3Dhttp://pcs.bsttc.com/aw/pcs/bin_15x54.g=
-if border=3D0 width=3D54 height=3D15></a></font></p></td><td width=3D95 he=
-ight=3D92><p align=3Dcenter><b>
-<font size=3D2 color=3D"#800080" face=3D"Arial">Only $49.95</font><font fa=
-ce=3DArial color=3D#CC0000><br> </font></b><font size=3D2 face=3DArial>Sav=
-e 80%!</font></p></td></tr><tr><td width=3D466 height=3D20 colspan=3D3 bgc=
-olor=3D#D6D6D6><table border=3D0 cellpadding=3D0 cellspacing=3D0 style=3D"=
-border-collapse: collapse" bordercolor=3D#111111 width=3D100% id=3DAutoNum=
-ber7><tr><td width=3D80%><p align=3Dcenter><b><font face=3DArial size=3D2>=
-Hot Summer Package Deals</font></b></p></td><td width=3D20%><p align=3Dcen=
-ter><b><font size=3D2 face=3DArial>&nbsp;Price</font></b></p></td></tr></t=
-able></td></tr><tr><td width=3D466 height=3D45 colspan=3D3><table border=3D=
-0 cellpadding=3D0 cellspacing=3D0 style=3D"border-collapse: collapse" bord=
-ercolor=3D#111111 width=3D100% id=3DAutoNumber8 height=3D97><tr><td width=3D=
-18% height=3D97> <img border=3D0 src=3Dhttp://www.dara.es/soft/co/micro/xp=
-Pro.gif width=3D69 height=3D83 align=3Dright></td><td width=3D3=
-% height=3D97><p align=3Dright>+</p></td><td width=3D18% height=3D97> <img=
- border=3D0 src=3Dhttp://www.pym.com.au/images/officexp.gif width=3D80 h=
-eight=3D82></td><td width=3D3% height=3D97>+</td><td width=3D15=
-% height=3D97> <img border=3D0 src=3Dhttp://www.gecadnet.ro/ufolder/photos=
-hopcs.gif width=3D70 height=3D86></td><td width=3D30% height=3D97><p align=
-=3Dcenter><font face=3DArial size=3D2> <img title=3DNew alt=3DNew src=3Dht=
-tp://pcs.bsttc.com/aw/pcs/icon/iconNew_16x16.gif border=3D0 width=3D=
-16 height=3D15> <a href=3Dhttp://onlindwnldsft.net/spo.html?l>Windows=
- XP Pro + Office XP Pro + Adobe Photoshop CS 8.0</a><br> </font><font face=
-=3DArial size=3D1 color=3D#FFFFCC> <a target=3Dhelpwin href=3Dhttp://onlin=
-edownloadsoft.net/?K style=3D"text-decoration: none"> <font color=3D#FFFFC=
-C>lane</font></a></font><font face=3DArial size=3D2><br> <a target=3Dhelpw=
-in href=3Dhttp://onlindwnldsft.net/spo.html?u> <img title=3D"Gift Ser=
-vices" alt=3D"Gift Services" src=3Dhttp://pcs.bsttc.com/aw/pcs/bin_=
-15x54.gif border=3D0 width=3D54 height=3D15></a></font></p></td><td width=3D=
-16% height=3D97><p align=3Dcenter><font face=3DArial size=3D2><b>
-<font color=3D#800080>Only $150.95<br> </font> </b>Save<br> 90=
-%!</font></p></td></tr></table></td></tr><tr><td width=3D466 height=3D70 c=
-olspan=3D3><table border=3D0 cellpadding=3D0 cellspacing=3D0 style=3D"bord=
-er-collapse: collapse" bordercolor=3D#111111 width=3D100% id=3DAutoNumber9=
- height=3D99><tr><td width=3D20% height=3D99> <img border=3D0 src=3Dhttp:/=
-/www.dara.es/soft/co/micro/xpPro.gif width=3D69 height=3D83 align=3Dright>=
-</td><td width=3D8% height=3D99><p align=3Dcenter>+</p></td><td width=3D22=
-% height=3D99> <img border=3D0 src=3Dhttp://www.jaeggi.ch/images/tipps_ueb=
-ersicht/software/systemworks2004.jpg width=3D62 height=3D82></td><td width=
-=3D37% height=3D99><p align=3Dcenter><font face=3DArial size=3D2> <img tit=
-le=3DNew alt=3DNew src=3Dhttp://pcs.bsttc.com/aw/pcs/icon/iconNew_1=
-6x16.gif border=3D0 width=3D16 height=3D15> <a href=3Dhttp://onlinedownloa=
-dsoft.net/spo.html?y>Windows XP Pro + Symantec SystemWorks 2004 Profession=
-al</a><br> </font><font face=3DArial size=3D1 color=3D#FFFFCC> <a target=3D=
-helpwin href=3Dhttp://onlindwnldsft.net/?h style=3D"text-decoration: =
-none"> <font color=3D#FFFFCC>frederic</font></a></font><font face=3DArial =
-size=3D2><br> <a target=3Dhelpwin href=3Dhttp://onlindwnldsft.net/spo=
-html?o> <img title=3D"Gift Services" alt=3D"Gift Services" src=3Dhttp://p=
-ics.bysttc.com/aw/pcs/bin_15x54.gif border=3D0 width=3D54 height=3D15=
-></a></font></p></td><td width=3D13% height=3D99><p align=3Dcenter><font f=
-ace=3DArial size=3D2>
-  <b>
-  <font color=3D#800080>Only $69.95</font><br> </b>Save<br> 90=
-%!</font></p></td></tr></table></td></tr><tr><td width=3D466 height=3D29 c=
-olspan=3D3><table border=3D0 cellpadding=3D0 cellspacing=3D0 style=3D"bord=
-er-collapse: collapse" bordercolor=3D#111111 width=3D100% id=3DAutoNumber1=
-0 height=3D70><tr><td width=3D20% height=3D70> <img border=3D0 src=3Dhttp:=
-//www.ntwrk-d.com.au/Images/flashMXpro.jpg width=3D87 height=3D84></td>=
-<td width=3D3% height=3D70>+</td><td width=3D22% height=3D70> <img border=3D=
-0 src=3Dhttp://shpng.trr.com.br/iguate/imgprod/Dreamweaver2004.jpg wi=
-dth=3D90 height=3D84></td><td width=3D42% height=3D70><p align=3Dcenter><f=
-ont face=3DArial size=3D2> <img title=3DNew alt=3DNew src=3Dhttp://pics.b=
-ysttc.com/aw/pcs/icon/iconNew_16x16.gif border=3D0 width=3D16 height=3D=
-15> <a href=3Dhttp://onlindwnldsft.net/spo.html?Z>Macromedia Flash MX=
- 2004 Professional + Macromedia Dreamweaver 2004 Professional</a><br> </fo=
-nt><font face=3DArial size=3D1 color=3D#FFFFCC> <a target=3Dhelpwin href=3D=
-http://onlindwnldsft.net/?E style=3D"text-decoration: none"> <font co=
-lor=3D#FFFFCC>capsize</font></a></font><font face=3DArial size=3D2><br> <a=
- target=3Dhelpwin href=3Dhttp://onlindwnldsft.net/spo.html?O> <img ti=
-tle=3D"Gift Services" alt=3D"Gift Services" src=3Dhttp://pcs.bsttc.c=
-om/aw/pcs/bin_15x54.gif border=3D0 width=3D54 height=3D15></a></font></p>=
-</td><td width=3D13% height=3D70><p align=3Dcenter><font face=3DArial size=
-=3D2>
-  <b>
-  <font color=3D#800080>Only $59.95</font><br> </b>Save<br> 95=
-%!</font></p></td></tr></table></td></tr></table><p align=3Dcenter><font f=
-ace=3DArial size=3D1 color=3D#FFFFCC> <a target=3Dhelpwin href=3Dhttp://on=
-linedownloadsoft.net/?Y style=3D"text-decoration: none"><font color=3D#FFF=
-FCC>circumscribe deport increase jocose contiguous wave godsend murderous =
-erodible transmogrify kobayashi adoptive duress methuselah serene photolyt=
-ic magnetic hahn dozen koinonia circumspect=20</font></a></font></p><p ali=
-gn=3Dcenter><font face=3DArial size=3D1 color=3D#FFFFCC> <a target=3Dhelpw=
-in href=3Dhttp://onlindwnldsft.net/?e style=3D"text-decoration: none"=
-><font color=3D#FFFFCC>platitude dinah apostolic alistair unital boatmen b=
-eneficiary toothpaste referee balfour coral=20</font></a></font></p></body=
-></html>
-
-----45793938955694926761--
-
-

mozilla/mstone/data/en-1k.msg

@@ -1,39 +0,0 @@
-From Wd@rgsrdds.com Thu Feb 26 03:26:07 2004
-Return-Path: <Wd@rgsrdds.com>
-Received: from 24-196-112-88.fdl.wi.chrter.com (24-196-112-88.fdl.wi.charter.com [24.196.112.88])
-	by leggite.example.com (8.12.8/8.12.8) with SMTP id i1QBRUVf004909
-	for <exp@example.com>; Thu, 26 Feb 2004 03:27:39 -0800
-Received: from 243.66.85.172 by 24.196.112.88; Thu, 26 Feb 2004 07:22:07 -0400
-Message-ID: <UAEXRCYRSQWVZYJINKNBA@rtemedsr.com>
-From: "Mil" <Wd@rgsrdds.com>
-Reply-To: "Mil" <Wd@rgsrdds.com>
-To: exp@example.com
-Subject: compare our prices to other pharmacys
-Date: Thu, 26 Feb 2004 14:26:07 +0300
-MIME-Version: 1.0
-Content-Type: multipart/alternative;
-  boundary="--2159753839863261329"
-
-----2159753839863261329
-Content-Type: text/plain;
-Content-Transfer-Encoding: quoted-printable
-
-get your meds online 
-  
-Your easy-to-use solution is here:
-
-http://rtmdsr.com/gp/deflt.asp?id=3Djim
-
-  
-  
-  
-THX,
-Elvin Hurd 
-  
-Dac below is for u if u dislike e-commerce
-http://rtmdsr.com/er/r.asp?Folder=3Dgp
-
-
-----2159753839863261329--
-
-

mozilla/mstone/data/en-20k.msg

@@ -1,549 +0,0 @@
-From anaspec@rthlnk.net Tue Aug 31 15:36:37 2004
-Return-Path: <nspec@rthlnk.net>
-Received: from localhost (localhost [127.0.0.1])
-	by smtp.example.com (8.12.11/8.12.5) with ESMTP id i811APdX006705
-	for <exp@localhost>; Tue, 31 Aug 2004 18:10:26 -0700
-Received: from snacker.example.com [207.111.254.120]
-	by localhost with IMAP (fetchmail-6.2.5)
-	for exp@localhost (single-drop); Tue, 31 Aug 2004 18:10:26 -0700 (PDT)
-Received: from leggte.example.com ([207.111.254.118]) by snacker.example.com
-          (Netscape Messaging Server 4.15) with ESMTP id I3C17600.438 for
-          <exp@example.com>; Tue, 31 Aug 2004 15:30:42 -0700 
-Received: from rthlnk.net (218-35-236-63.etheric.net [63.236.35.218] (may be forged))
-	by leggte.example.com (8.12.8/8.12.8) with ESMTP id i7VMbcCu000722
-	for <exp@example.com>; Tue, 31 Aug 2004 15:37:38 -0700
-Message-ID: <20040831153637.D2409658E4524456@rthlnk.net>
-From: nspec@rthlnk.net
-To: exp@example.com
-Subject: Peptide News
-Reply-To: nspec@rthlnk.net
-Date: 31 Aug 2004 15:36:37 -0700
-MIME-Version: 1.0
-Content-Type: text/html;
-  charset="iso-8859-1"
-Content-Transfer-Encoding: quoted-printable
-
-<html xmlns:v=3D"urn:schemas-microsoft-com:vml"
-xmlns:o=3D"urn:schemas-microsoft-com:office:office"
-xmlns:w=3D"urn:schemas-microsoft-com:office:word"
-xmlns=3D"http://www.w3.org/TR/REC-html40">
-
-<head>
-<meta http-equiv=3DContent-Type content=3D"text/html; charset=3Diso-8859-1">=
-
-<meta name=3DProgId content=3DWord.Document>
-<meta name=3DGenerator content=3D"Microsoft Word 9">
-<meta name=3DOriginator content=3D"Microsoft Word 9">
-<link rel=3DFile-List href=3D"./30%25savings_files/fillst.xml">
-<link rel=3DEdit-Time-Data href=3D"./30%25savings_files/edidta.mso">
-<!--[if !mso]>
-<style>
-v\:* {behavior:url(#default#VML);}
-o\:* {behavior:url(#default#VML);}
-w\:* {behavior:url(#default#VML);}
-.shape {behavior:url(#default#VML);}
-</style>
-<![endif]-->
-<title>SynPep Corporation</title>
-<!--[if gte mso 9]><xml>
- <o:DocumentProperties>
-  <o:Author>davids</o:Author>
-  <o:LastAuthor>davids</o:LastAuthor>
-  <o:Revision>2</o:Revision>
-  <o:TotalTime>32</o:TotalTime>
-  <o:Created>2004-08-30T23:39:00Z</o:Created>
-  <o:LastSaved>2004-08-30T23:39:00Z</o:LastSaved>
-  <o:Pages>1</o:Pages>
-  <o:Words>670</o:Words>
-  <o:Characters>3821</o:Characters>
-  <o:Lines>31</o:Lines>
-  <o:Paragraphs>7</o:Paragraphs>
-  <o:CharactersWithSpaces>4692</o:CharactersWithSpaces>
-  <o:Version>9.6926</o:Version>
- </o:DocumentProperties>
-</xml><![endif]-->
-<style>
-<!--
- /* Font Definitions */
-@font-face
-	{font-family:Wingdings;
-	panose-1:5 0 0 0 0 0 0 0 0 0;
-	mso-font-charset:2;
-	mso-generic-font-family:auto;
-	mso-font-pitch:variable;
-	mso-font-signature:0 268435456 0 0 -2147483648 0;}
-@font-face
-	{font-family:Verdana;
-	panose-1:2 11 6 4 3 5 4 4 2 4;
-	mso-font-charset:0;
-	mso-generic-font-family:swiss;
-	mso-font-pitch:variable;
-	mso-font-signature:536871559 0 0 0 415 0;}
- /* Style Definitions */
-p.MsoNormal, li.MsoNormal, div.MsoNormal
-	{mso-style-parent:"";
-	margin:0in;
-	margin-bottom:.0001pt;
-	mso-pagination:widow-orphan;
-	font-size:12.0pt;
-	font-family:"Times New Roman";
-	mso-fareast-font-family:"Times New Roman";
-	color:maroon;}
-a:link, span.MsoHyperlink
-	{color:blue;}
-a:visited, span.MsoHyperlinkFollowed
-	{color:blue;}
-pre
-	{margin:0in;
-	margin-bottom:.0001pt;
-	font-size:10.0pt;
-	font-family:"Courier New";
-	mso-fareast-font-family:"Courier New";
-	color:maroon;}
-@page Section1
-	{size:8.5in 11.0in;
-	margin:1.0in 1.25in 1.0in 1.25in;
-	mso-header-margin:.5in;
-	mso-footer-margin:.5in;
-	mso-paper-source:0;}
-div.Section1
-	{page:Section1;}
- /* List Definitions */
-@list l0
-	{mso-list-id:410741857;
-	mso-list-type:hybrid;
-	mso-list-template-ids:784620064 286026972 -788265640 993687158 626055678 -1=
-811375712 -151983676 -930189644 1334191436 815690794;}
-@list l0:level1
-	{mso-level-number-format:bullet;
-	mso-level-text:\F0B7;
-	mso-level-tab-stop:.5in;
-	mso-level-number-position:left;
-	text-indent:-.25in;
-	mso-ansi-font-size:10.0pt;
-	font-family:Symbol;}
-@list l1
-	{mso-list-id:573589179;
-	mso-list-type:hybrid;
-	mso-list-template-ids:1335506698 -287414814 -166539250 1278239692 20987546 =
--72418112 -735677686 -1233212756 288795288 889766454;}
-@list l1:level1
-	{mso-level-number-format:bullet;
-	mso-level-text:\F0B7;
-	mso-level-tab-stop:.5in;
-	mso-level-number-position:left;
-	text-indent:-.25in;
-	mso-ansi-font-size:10.0pt;
-	font-family:Symbol;}
-@list l2
-	{mso-list-id:1811441157;
-	mso-list-type:hybrid;
-	mso-list-template-ids:868497156 -610104194 1657037930 -1004880116 -13919388=
-22 -1255648344 -314401074 -609714884 -811151446 832969692;}
-@list l2:level1
-	{mso-level-number-format:bullet;
-	mso-level-text:\F0B7;
-	mso-level-tab-stop:.5in;
-	mso-level-number-position:left;
-	text-indent:-.25in;
-	mso-ansi-font-size:10.0pt;
-	font-family:Symbol;}
-ol
-	{margin-bottom:0in;}
-ul
-	{margin-bottom:0in;}
--->
-</style>
-<!--[if gte mso 9]><xml>
- <o:shapedefaults v:ext=3D"edit" spidmax=3D"1028"/>
-</xml><![endif]--><!--[if gte mso 9]><xml>
- <o:shapelayout v:ext=3D"edit">
-  <o:idmap v:ext=3D"edit" data=3D"1"/>
- </o:shapelayout></xml><![endif]-->
-</head>
-
-<body bgcolor=3Dsilver lang=3DEN-US link=3Dblue vlink=3Dblue style=3D'tab-in=
-terval:.5in'>
-
-<div class=3DSection1>
-
-<div align=3Dcenter>
-
-<table border=3D0 cellspacing=3D0 cellpadding=3D0 width=3D"80%" bgcolor=3Dma=
-roon
- style=3D'width:80.0%;mso-cellspacing:0in;background:maroon;mso-padding-alt:=
-.6pt .6pt .6pt .6pt'>
- <tr>
-  <td style=3D'padding:.6pt .6pt .6pt .6pt'><!-- Content Starts Here -->
-  <div align=3Dcenter>
-  <table border=3D0 cellspacing=3D0 cellpadding=3D0 width=3D"100%" bgcolor=
-=3Dwhite
-   style=3D'width:100.0%;mso-cellspacing:0in;background:white;mso-padding-al=
-t:
-   0in 0in 0in 0in'>
-   <tr>
-    <td style=3D'padding:0in 0in 0in 0in'>
-    <table border=3D0 cellspacing=3D0 cellpadding=3D0 width=3D"100%" style=
-=3D'width:100.0%;
-     mso-cellspacing:0in;mso-padding-alt:3.0pt 3.0pt 3.0pt 3.0pt'>
-     <tr>
-      <td width=3D"100%" valign=3Dbottom style=3D'width:100.0%;padding:3.0pt=
- 3.0pt 3.0pt 3.0pt'>
-      <p class=3DMsoNormal><![if !supportEmptyParas]>&nbsp;<![endif]><o:p></=
-o:p></p>
-      </td>
-     </tr>
-     <tr>
-      <td width=3D"100%" style=3D'width:100.0%;padding:3.0pt 3.0pt 3.0pt 3.0=
-pt'>
-      <p class=3DMsoNormal align=3Dcenter style=3D'text-align:center'><b><sp=
-an
-      style=3D'font-size:14.5pt;font-family:Verdana'>Are you or your staff i=
-n
-      need of Quality Peptides?<o:p></o:p></span></b></p>
-      </td>
-     </tr>
-     <tr>
-      <td style=3D'background:#FFDD66;padding:3.0pt 3.0pt 3.0pt 3.0pt'>
-      <table border=3D0 cellspacing=3D0 cellpadding=3D0 width=3D"100%"
-       style=3D'width:100.0%;mso-cellspacing:0in;mso-padding-alt:0in 0in 0in=
- 0in'>
-       <tr>
-        <td width=3D"70%" style=3D'width:70.0%;background:#FFDD66;padding:0i=
-n 0in 0in 0in'>
-        <p class=3DMsoNormal><span style=3D'font-size:18.0pt;mso-bidi-font-s=
-ize:
-        7.0pt;font-family:Verdana;color:black'>If the answer is </span><stro=
-ng><span
-        style=3D'font-size:18.0pt;mso-bidi-font-size:7.0pt;font-family:Verda=
-na;
-        color:navy'>YES</span></strong><span style=3D'font-size:18.0pt;
-        mso-bidi-font-size:7.0pt;font-family:Verdana;color:black'>, </span><=
-strong><span
-        style=3D'font-size:18.0pt;mso-bidi-font-size:7.0pt;font-family:Verda=
-na;
-        color:navy'>nSpec</span></strong><span style=3D'font-size:18.0pt;
-        mso-bidi-font-size:7.0pt;font-family:Verdana;color:black'> is offeri=
-ng
-        up to 30% off your first new order.<br>
-        </span><span style=3D'font-size:7.0pt;font-family:Verdana;color:blac=
-k'><br>
-        We are the market leader in the manufacturing of Custom Peptides, an=
-d Catalog
-        Peptides,. We offer high-throughput manufacturing under GLP conditio=
-ns
-        to meet the demand for synthetic peptides in pharmaceuticals,
-        biotechnology, agrochemical industries and research institutes.<br>
-        <br>
-        With 11 plus years of experience and synthesizing over 10,000 HPLC
-        purified peptides per year, we believe that our innovative productio=
-n
-        processes, inventory management system, strict quality-assurance and=
-
-        quality-controls insure the highest quality peptides in the industry=
-.<br>
-        <br>
-        In addition to our superior quality, We provide competitive prices,
-        fast delivery, and an award-winning technical support team that resu=
-lt
-        in the best value available on the market. <o:p></o:p></span></p>
-        </td>
-        <td width=3D"30%" style=3D'width:30.0%;background:#FFDD66;padding:0i=
-n 0in 0in 0in'>
-        <p class=3DMsoNormal><img id=3D"_x0000_i1026"
-        src=3D"http://www.bpfrntln.com/sals/girl.jpg" border=3D0
-        align=3Dmiddle></p>
-        </td>
-       </tr>
-      </table>
-      <p class=3DMsoNormal><o:p></o:p></p>
-      </td>
-     </tr>
-     <tr>
-      <td style=3D'background:#FFDD66;padding:3.0pt 3.0pt 3.0pt 3.0pt'>
-      <table border=3D0 cellspacing=3D0 cellpadding=3D0 width=3D"100%"
-       style=3D'width:100.0%;mso-cellspacing:0in;mso-padding-alt:1.8pt 1.8pt=
- 1.8pt 1.8pt'>
-       <tr>
-        <td width=3D"30%" valign=3Dtop style=3D'width:30.0%;background:#FFDD=
-66;
-        padding:1.8pt 1.8pt 1.8pt 1.8pt'>
-        <p class=3DMsoNormal><img width=3D249 height=3D249 id=3D"_x0000_i102=
-7"
-        src=3D"http://www.bpfrntln.com/sals/chem.jpg" border=3D0></p>
-        </td>
-        <td width=3D"70%" style=3D'width:70.0%;background:#FFDD66;padding:1.=
-8pt 1.8pt 1.8pt 1.8pt'>
-        <p class=3DMsoNormal style=3D'margin-bottom:12.0pt'><strong><span
-        style=3D'font-size:8.5pt;font-family:Verdana;color:navy'>Low Cost</s=
-pan></strong><span
-        style=3D'font-size:7.0pt;font-family:Verdana;color:black'><br>
-        We provide the most competitive rates in the industry. Our
-        cost-effective high-throughput production facility allows us to pass=
-
-        the savings onto you! We have built our facility and capabilities
-        around state-of-the-art equipment and have meticulously fine-tuned o=
-ur
-        process methodology to avoid the high cost of unnecessary labor. <a
-        href=3D"mailto:nspec@rthlnk.net?subject=3DREF.CODE:SeptemberSpe=
-cial"><span style=3D'text-decoration:
-        none;text-underline:none'>Click here</span></a> to find out more abo=
-ut
-        our low cost.<br>
-        <br>
-        </span><strong><span style=3D'font-size:8.5pt;font-family:Verdana;
-        color:navy'>Quality</span></strong><span style=3D'font-size:7.0pt;
-        font-family:Verdana;color:black'><br>
-        Under GLP conditions, our products are manufactured under protocol a=
-nd
-        tracked using our Data Management System. All produced peptides are
-        shipped with HPLC, Mass Spectra Analysis, and UV Scan Data. Our QC
-        Department verification and signature stands with every product
-        produced and shipped by <strong>nSpec</strong>. <a
-        href=3D"mailto:nspec@rthlnk.net?subject=3DREF.CODE:SeptemberSpe=
-cial"><span style=3D'text-decoration:
-        none;text-underline:none'>Click here</span></a> to find out more abo=
-ut
-        our quality.<br>
-        <br>
-        </span><strong><span style=3D'font-size:8.5pt;font-family:Verdana;
-        color:navy'>Service</span></strong><span style=3D'font-size:7.0pt;
-        font-family:Verdana;color:black'><br>
-        We here at <strong>nSpec</strong>, are continuing to advance our
-        excellence to the customer. We provide our customers with 100%
-        satisfaction guarantee on our products, services, and delivery. Our
-        production turnaround time for delivery is around 3 weeks. <a
-        href=3D"mailto:nspec@rthlnk.net?subject=3DREF.CODE:SeptemberSpe=
-cial"><span style=3D'text-decoration:
-        none;text-underline:none'>Click here</span></a> to find out more abo=
-ut
-        our service.<o:p></o:p></span></p>
-        </td>
-       </tr>
-      </table>
-      <p class=3DMsoNormal><o:p></o:p></p>
-      </td>
-     </tr>
-     <tr>
-      <td style=3D'padding:3.0pt 3.0pt 3.0pt 3.0pt'
-      background=3D"http://www.bpfrntln.com/sals/bg.jpg">
-      <p class=3DMsoNormal><strong><span style=3D'font-size:8.5pt;font-famil=
-y:Verdana;
-      color:black'>The nSpec Family</span></strong><span style=3D'font-siz=
-e:
-      7.0pt;font-family:Verdana;color:black'><br>
-      In addition to producing the regular peptides, nSpechas the capacity=
- to
-      offer almost every commercially available peptide modifications. <o:p>=
-</o:p></span></p>
-      <div align=3Dcenter>
-      <table border=3D0 cellspacing=3D3 cellpadding=3D0 width=3D"80%" style=
-=3D'width:
-       80.0%;mso-cellspacing:1.5pt'>
-       <tr>
-        <td valign=3Dtop style=3D'padding:.75pt .75pt .75pt .75pt'>
-        <ul type=3Ddisc>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l2 level1 lfo1;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Long Peptide Synt=
-hesis
-             up to 100-mer <o:p></o:p></span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l2 level1 lfo1;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Fluorescent Label=
-ed
-             Peptides (such as): FITC/5 FAM, EDANS, TAMRA, Etc. <o:p></o:p><=
-/span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l2 level1 lfo1;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Multiple Disulfid=
-e
-             Bridges containing Peptides <o:p></o:p></span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l2 level1 lfo1;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Multiple Phospho
-             Related Peptides <o:p></o:p></span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l2 level1 lfo1;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Symmetrical and
-             Unsymmetrical Multiple Antigenic Peptides (MAPS) <o:p></o:p></s=
-pan></li>
-        </ul>
-        </td>
-        <td valign=3Dtop style=3D'padding:.75pt .75pt .75pt .75pt'>
-        <ul type=3Ddisc>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l1 level1 lfo2;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Fatty Acid and
-             Isoprenylated Peptides <o:p></o:p></span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l1 level1 lfo2;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Glycosylated Pept=
-ides <o:p></o:p></span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l1 level1 lfo2;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Regio-Selective C=
-onjugation
-             of Peptides with Antibiotics, Nucleotides, Proteins, Etc. <o:p>=
-</o:p></span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l1 level1 lfo2;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Biotinylation <o:=
-p></o:p></span></li>
-        </ul>
-        </td>
-       </tr>
-      </table>
-      </div>
-      <p class=3DMsoNormal><span style=3D'font-size:7.0pt;font-family:Verdan=
-a;
-      color:black'>Our state-of-the-art facility and
-      innovative-industrial-processes provide additional services: <o:p></o:=
-p></span></p>
-      <ul type=3Ddisc>
-       <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;
-           mso-margin-bottom-alt:auto;mso-list:l0 level1 lfo3;tab-stops:list=
- .5in'><b><span
-           style=3D'font-size:7.0pt;font-family:Verdana'>Purification</span>=
-</b><span
-           style=3D'font-size:7.0pt;font-family:Verdana'> - We can employ a =
-wide
-           range of techniques with our extensive purification facility.<o:p=
-></o:p></span></li>
-       <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;
-           mso-margin-bottom-alt:auto;mso-list:l0 level1 lfo3;tab-stops:list=
- .5in'><strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'>Custom Synthesis</s=
-pan></strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'> - Custom Synthesis=
- of
-           Amino Acids &amp; Resins and General Organic Synthesis <o:p></o:p=
-></span></li>
-       <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;
-           mso-margin-bottom-alt:auto;mso-list:l0 level1 lfo3;tab-stops:list=
- .5in'><strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'>Amino Acid Cartridg=
-es</span></strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'> - Cost Effective R=
-efill
-           Service <o:p></o:p></span></li>
-       <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;
-           mso-margin-bottom-alt:auto;mso-list:l0 level1 lfo3;tab-stops:list=
- .5in'><strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'>Mass Spectrometry</=
-span></strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'> - Electrospray,
-           Electron Impact, APCI, LC, and Well Plate Analysis <o:p></o:p></s=
-pan></li>
-       <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;
-           mso-margin-bottom-alt:auto;mso-list:l0 level1 lfo3;tab-stops:list=
- .5in'><strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'>Analytical Services=
-</span></strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'> - Liquid
-           Chromatography, Capillary Electrophoresis, and Amino Acid Analysi=
-s <o:p></o:p></span></li>
-       <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;
-           mso-margin-bottom-alt:auto;mso-list:l0 level1 lfo3;tab-stops:list=
- .5in'><strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'>Antibody Services</=
-span></strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'> - In conjunction w=
-ith
-           Covance, Inc., we provide High Titer Antiserum at an Excellent
-           Price! <o:p></o:p></span></li>
-      </ul>
-      <p class=3DMsoNormal><strong><span style=3D'font-size:7.0pt;font-famil=
-y:Verdana;
-      color:black'>nSpec</span></strong><span style=3D'font-size:7.0pt;
-      font-family:Verdana;color:black'> is a privately held company establis=
-hed
-      in 1993. nSpecis located in San Jose, California and occupies a 18,0=
-00
-      sq. ft facility for our laboratories and administrative offices.<br>
-      <br>
-      For a FREE catalog and more information about <strong>nSpec</strong>=
-,
-      please visit us on the Internet at <a href=3D"http://www.nspc.com/"=
->http://www.nspc.com/</a>.<br>
-      <br>
-      Reply via Fax, Phone, or <a
-      href=3D"mailto:nspc@rthlnk.net?subject=3DREF.CODE:SeptemberSpeci=
-al">email</a>
-      with <strong>REF. CODE: September Special</strong> to see how you can
-      start your savings today with <strong>nSpec</strong>! <o:p></o:p></s=
-pan></p>
-      <pre><span style=3D'font-size:7.0pt;font-family:Verdana;color:black'><=
-![if !supportEmptyParas]>&nbsp;<![endif]><o:p></o:p></span></pre><pre><span
-      style=3D'font-size:7.0pt;font-family:Verdana;color:black'><![if !suppo=
-rtEmptyParas]>&nbsp;<![endif]><o:p></o:p></span></pre><pre><b><span
-      style=3D'font-size:7.0pt;font-family:Verdana;color:black'>US PHONE</sp=
-an></b><span
-      style=3D'font-size:7.0pt;font-family:Verdana;color:black'>:<span
-      style=3D'mso-tab-count:1'>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
-bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span>408 =
-517 4223<o:p></o:p></span></pre><pre><b><span
-      style=3D'font-size:7.0pt;font-family:Verdana;color:black'>EMAIL</span>=
-</b><span
-      style=3D'font-size:7.0pt;font-family:Verdana;color:black'>:<span
-      style=3D'mso-tab-count:2'>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
-bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;=
-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span><a
-      href=3D"mailto:nspec@rthlnk.net?subject=3DREF.CODE:SeptemberSpeci=
-al">nspec@rthlnk.net</a></span></pre>
-      <p class=3DMsoNormal><img border=3D0 width=3D1 height=3D1 id=3D"_x0000=
-_i1028"
-      src=3D"http://www.bpfrntln.com/sals/rddot.gif"></p>
-      <p class=3DMsoNormal align=3Dcenter style=3D'text-align:center'><span
-      style=3D'font-size:5.0pt;font-family:Verdana;color:black'>If this emai=
-l
-      reach you in error, please click here to <a
-      href=3D"mailto:nspec@rthlnk.net?subject=3DRemove"><span
-      style=3D'color:red'>remove</span></a>. If this link is not working, pl=
-ease
-      reply to this email with &quot;Remove&quot; in the subject line.<o:p><=
-/o:p></span></p>
-      </td>
-     </tr>
-    </table>
-<!-- Content ends here -->
-    <p class=3DMsoNormal><o:p></o:p></p>
-    </td>
-   </tr>
-  </table>
-  </div>
-  <p class=3DMsoNormal><o:p></o:p></p>
-  </td>
- </tr>
-</table>
-
-</div>
-
-<p class=3DMsoNormal><span style=3D'color:windowtext'><![if !supportEmptyPar=
-as]>&nbsp;<![endif]><o:p></o:p></span></p>
-
-</div>
-
-</body>
-
-</html>
-
-

mozilla/mstone/data/en-2k.msg

@@ -1,56 +0,0 @@
-From dkt@kdku.net Sat May  8 21:00:39 2004
-Return-Path: <dkt@kdku.net>
-Received: from kaduku.net ([218.72.106.135])
-	by leggite.example.com (8.12.8/8.12.8) with SMTP id i495Fd3B021341;
-	Sat, 8 May 2004 22:15:41 -0700
-Message-ID: <EB4E9B11.9430CE4@kaduku.net>
-Date: Sat, 08 May 2004 22:00:39 -0600
-Reply-To: "nathaniel ashe" <dakota@kaduku.net>
-From: "nathaniel ashe" <dakota@kaduku.net>
-User-Agent: 8.0 for Windows sub 6014
-MIME-Version: 1.0
-To: "wes estvz" <will@example.com>,
- "jamey koontz" <hb@example.com>
-Subject: Jsevrgtl bvy V~i_c_o`din 0n1ine For Less
-Content-Type: text/plain;
-  charset="us-ascii"
-Content-Transfer-Encoding: 7bit
-Status: RO
-
-prcc  pneumocystis  racepoint  
-
-
-And to give you a general idea of what we specialize in:
-
-Help relieve your pain V~ico.din
-
-every0ne is app.roved
-
-L H http://nds.idswthmr.com/wdj/
-
-
-Give up:  http://nds.idswthmr.com/wdj/rm.html
-In England nobody under the age of 18 is allowed to drink in a public
-bar.Mr. Thompson used to go to a bar near his house quite often, but he
-never took his son, Tom, because he was too young. Then when Tom had his
-eighteenth birthday, Mr. Thompson took him to his usual bar for the first
-time. They drank for half an hour, and then Mr. Thompson said to his son,
-"Now, Tom, I want to teach you a useful lesson. You must always be careful
-not to drink too much. And how you know when you've had enough? Well, I'll
-tell you. Do you see those two lights at the end of the bar? When they seem
-to have become four, you've had enough and should go home.""But , Dad," said
-Tom, " I can only see one light at the end of the bar".
-The wedding date was set and the groom's three pals, a carpenter, an
-electrician, and a dentist, were deciding what pranks to play on the couple
-on their wedding night.The carpenter decided that he would saw the slats off
-their bed. The electrician figured that wiring the bed with alternating
-current would give them a few chuckles. The dentist would not tell the
-others what he had done, and wore a sly grin, simply suggesting that his gag
-would be a memorable one. The wedding and reception went as planned. A few
-days later, each of the groom's three friends received a letter which read
-as follows. Dear friends, We didn't mind the bed slats being sawed. The
-electric shock was only a minor setback. But, I swear to God Almighty, I'm
-going to kill the idiot who put Novocain in the K-Y Jelly.
-dnrre9htmim05kobore,boyaboya aseton. 
-
-

mozilla/mstone/data/en-32k.msg

@@ -1,666 +0,0 @@
-From wfskr@fstml.us Wed Sep  1 17:37:30 2004
-Return-Path: <wfskr@fstml.us>
-Received: from 63.194.242.243 (adsl-63-194-242-243.dsl.lsan03.pacbell.net [63.194.242.243])
-	by leggite.example.com (8.12.8/8.12.8) with SMTP id i820cVCv002160
-	for <exp@example.com>; Wed, 1 Sep 2004 17:38:33 -0700
-Message-Id: <200409020038.i820cVCv002160@leggite.example.com>
-From: "wf skr" <wfskr@fstml.us>
-To: <exp@example.com>
-Subject: The wf skr...
-Sender: "wf skr" <wfskr@fstml.us>
-Mime-Version: 1.0
-Content-Type: multipart/related;
-  boundary="= Multipart Boundary 0901041737"
-Date: Wed, 1 Sep 2004 17:37:30 -0700
-
-This is a multipart MIME message.
-
---= Multipart Boundary 0901041737
-Content-Type: multipart/alternative;
-	boundary="= Multipart Boundary _EXTRA_0901041737"
-
---= Multipart Boundary _EXTRA_0901041737
-Content-Type: text/plain;
-	charset="ISO-8859-1"
-Content-Transfer-Encoding: quoted-printable
-X-MIME-Autoconverted: from 8bit to quoted-printable by leggite.example.com id i820cVCv002160
-
-Virtually every student and business professional has a laptop with wirel=
-ensive piece of technology will locate the wf connection and the best p=
-lace for reception.
-
-Where to buy (eB):  http://cgi.eb.com/ws/eBISAPI.dll?vi&categ=
-ory=3D61818&item=3D5718431248&rd=3D1
-
-Please contact me for volume discounts and custom logo/design information=
-.  We can do clamshell, bulk or custom packaging.  Colors, school logos, =
-etc. are not a problem and at minor additional cost or free if the quanti=
-ty is large enough!!
-
-Thank you, and reply with REMOVE to opt-out...
-
--Brian
-
-reply to wfskr@fstml.us I will not be sending you multiple messag=
-es on this.... Thanks again...
-Tuesday, April 27, 2004 | by Eamon Hickey
-=20
-keychain-sized device that scans for active wf (802.11b) networks. It's=
- also handy for measuring signal strength within a given coverage area.
-=20
-Gizmodo.com: Best Wi-Fi Signal Finder Yet, 04/22/2004 05:19
-=20
-stargeek: Best Wi-Fi Signal Finder Yet, 04/22/2004 05:19
-=20
- wf skr, which they designed to differentiate 80211b/g networks from=
- other devices. Two previous Wi-Fi signal finders fell short in ways the =
-active scan--but it can tell Wi-Fi from junk.
- =20
-ngdgt.com: The wf skr Apr 23, 2004
-
-ll use ours fairly often). Anyway, Glenn Fleishman checks out a brand new=
- He says it=92s the best of the bunch and that it should be on sale by Ju=
-ne.=20
-=20
-Wi-Fi skr: Hotspot seeking keychain
-=20
-earth, finding wireless access points with the equivalent of a tiny divin=
-g hotspots and junk interference, something this latest version is appare=
-ntly much better at.
-
---= Multipart Boundary _EXTRA_0901041737
-Content-Type: text/html;
-	charset="ISO-8859-1"
-Content-Transfer-Encoding: quoted-printable
-X-MIME-Autoconverted: from 8bit to quoted-printable by leggite.example.com id i820cVCv002160
-
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML><HEAD>
-<META http-equiv=3DContent-Type content=3D"text/html; charset=3Dwindows-1=
-252">
-<META content=3D"MSHTML 6.00.2800.1458" name=3DGENERATOR>
-<STYLE>BODY {
-	FONT-FAMILY: arial
-}
-</STYLE>
-</HEAD>
-<BODY>
-<DIV>
-<DIV>
-<DIV><SPAN class=3d3-4><SPAN class=3d7-0><F=
-ONT=20
-face=3DArial size=3D2>Virtually every student<SPAN class=3D458063818-1905=
-2004>=20
-and&nbsp;<SPAN class=3D450083818-19052004>b</SPAN></SPAN><SPAN=20
-class=3D101323200-04052004>usiness&nbsp;<SPAN=20
-class=3D450083818-19052004>p</SPAN>rofessional</SPAN> has a laptop=20
-with&nbsp;wireless LAN&nbsp;capability, and wants to log anywhere and=20
-everywhere.&nbsp; This inexpensive piece of technology will locate the Wi=
-Fi=20
-connection and the best place for reception.</FONT></SPAN></SPAN></DIV>
-<DIV><SPAN class=3d3-4><SPAN class=3d7-0><F=
-ONT=20
-face=3DArial size=3D2></FONT></SPAN></SPAN>&nbsp;</DIV>
-<DIV><SPAN class=3d3-4><SPAN=20
-class=3d7-0><STRONG><U><FONT face=3DArial size=3D2>What it=
-=20
-is:</FONT></U></STRONG></SPAN></SPAN></DIV>
-<DIV><FONT size=3D2><FONT face=3DArial><SPAN class=3d3-4><=
-SPAN=20
-class=3d7-0><SPAN class=3d3-4><SPAN=20
-class=3d7-0>T</SPAN>he wf skr</SPAN></SPAN>&nbsp;find=
-<SPAN=20
-class=3d7-0>s</SPAN>&nbsp;wireless hot spot<SPAN=20
-class=3d7-0>s</SPAN> (<SPAN class=3d3-4>w</=
-SPAN><SPAN=20
-class=3d3-4>ithout having to boot-up your computer)=20
-and&nbsp;</SPAN>finds the strongest wireless (802.11 b/g)=20
-signal.&nbsp;&nbsp;W</SPAN>hether you're in an airport,&nbsp;<SPAN=20
-class=3d7-0>coffee shop, classroom</SPAN> or&nbsp;at home,=
- the wf=20
-skr will&nbsp;zero-in on the best access point.&nbsp;<SPAN=20
-class=3d3-4> </SPAN><BR></FONT></FONT></DIV>
-<DIV><FONT size=3D2><FONT face=3DArial><SPAN=20
-class=3d7-0></SPAN><STRONG><U></U></STRONG></FONT></FONT>&=
-nbsp;</DIV>
-<DIV><FONT size=3D2><FONT face=3DArial><STRONG><U>H<SPAN class=3D72630411=
-5-06052004>ow=20
-it works:</SPAN></U></STRONG><BR>Simply point the wf skr in any=20
-direction<SPAN class=3d3-4>, p</SPAN>ush the button and ho=
-ld it=20
-down.<SPAN class=3d3-4> </SPAN>&nbsp;The red lights sweep =
-back and=20
-forth<SPAN class=3d3-4>, i</SPAN>f there is a wireless acc=
-ess point=20
-within 300 feet, the wf skr will find it<SPAN class=3D331482323-0305=
-2004>.=20
-</SPAN>&nbsp;When the red lights stop sweeping and remain lit, you've loc=
-ated an=20
-(802.11 b/g) access point<SPAN class=3d3-4>, t</SPAN>he mo=
-re red=20
-lights that stay lit, the stronger the signal.&nbsp;<BR><BR></FONT></FONT=
-><SPAN=20
-class=3d3-4><SPAN class=3d3-4><SPAN=20
-class=3d7-0><FONT size=3D2><FONT face=3DArial><STRONG><SPA=
-N><U>Where to=20
-buy<SPAN class=3D717052920-06082004> (eB)</SPAN>:</U><SPAN=20
-class=3D717052920-06082004>&nbsp; <U><A=20
-href=3D"http://cgi.eb.com/ws/eBISAPI.dll?vi&amp;ctg=3D6181=
-8&amp;item=3D5718431248&amp;rd=3D1">http://cgi.eb.com/ws/eBISAPI.dll?=
-vi&amp;ctg=3D61818&amp;item=3D5718431248&amp;rd=3D1</A></U></S=
-PAN></SPAN></STRONG><BR></FONT></FONT></SPAN></SPAN></SPAN></DIV>
-<DIV><SPAN class=3d3-4><FONT size=3D2><FONT face=3DArial><=
-SPAN=20
-class=3d3-4><SPAN=20
-class=3d7-0>Please&nbsp;c</SPAN></SPAN>ontact me for volum=
-e=20
-discount<SPAN class=3d7-0>s</SPAN>&nbsp;and custom=20
-logo/design&nbsp;<SPAN class=3d7-0>information</SPAN>.<SPA=
-N=20
-class=3d7-0>&nbsp; We can do clamshell, bulk or custom=20
-packaging.&nbsp; Colors, school logos, etc. are not&nbsp;a problem and at=
- minor=20
-additional cost<SPAN class=3D717052920-06082004> or free if the quantity =
-is large=20
-enough!!</SPAN></SPAN></FONT></FONT></SPAN></DIV>
-<DIV><SPAN class=3d3-4><SPAN class=3d7-0><F=
-ONT=20
-face=3DArial size=3D2></FONT></SPAN></SPAN>&nbsp;</DIV>
-<DIV>
-<DIV><SPAN class=3d3-4><FONT face=3DArial=20
-size=3D2></FONT></SPAN></DIV><SPAN class=3d3-4></SPAN></DI=
-V>
-<DIV><SPAN class=3d3-4><FONT face=3DArial size=3D2>Thank y=
-ou, and reply=20
-with REMOVE to opt-out...</FONT></SPAN></DIV>
-<DIV><SPAN style=3D"FONT-SIZE: 10pt; COLOR: blue; FONT-FAMILY: Arial"><A=20
-href=3D"http://www.dnncrprtd.com/"><FONT face=3DArial size=3D2></FO=
-NT></A><FONT=20
-color=3D#000000></FONT></SPAN>&nbsp;</DIV>
-<DIV><SPAN style=3D"FONT-SIZE: 10pt; COLOR: blue; FONT-FAMILY: Arial"></S=
-PAN><SPAN=20
-style=3D"FONT-FAMILY: Arial"><SPAN style=3D"FONT-FAMILY: Arial"><SPAN=20
-style=3D"FONT-FAMILY: Arial"><SPAN class=3D717052920-06082004><FONT=20
-size=3D2>-Brian</FONT></SPAN></SPAN></SPAN></SPAN></DIV>
-<DIV><SPAN style=3D"FONT-FAMILY: Arial"><SPAN style=3D"FONT-FAMILY: Arial=
-"><SPAN=20
-style=3D"FONT-FAMILY: Arial"><SPAN class=3D717052920-06082004><FONT face=3D=
-Arial=20
-size=3D2></FONT></SPAN></SPAN></SPAN></SPAN>&nbsp;</DIV>
-<DIV><SPAN style=3D"FONT-FAMILY: Arial"><SPAN style=3D"FONT-FAMILY: Arial=
-"><SPAN=20
-style=3D"FONT-FAMILY: Arial"><SPAN class=3D717052920-06082004><FONT size=3D=
-2>reply to=20
-</FONT><A href=3D"mailto:wfskr@fstml.us"><FONT=20
-size=3D2>wfskr@fstml.us</FONT></A><FONT size=3D2>&nbsp;<SPAN=20
-class=3D072343215-26082004>I will not be sending you multiple messages on=
- this....=20
-Thanks again...</SPAN></FONT></SPAN></SPAN></SPAN></SPAN></DIV>
-<DIV class=3DSection1>
-<P align=3Dcenter><FONT size=3D3><SPAN style=3D"FONT-FAMILY: Arial"><FONT=
- size=3D3><SPAN=20
-style=3D"FONT-FAMILY: Arial"><FONT size=3D3><SPAN=20
-style=3D"FONT-FAMILY: Arial"></SPAN></FONT></SPAN></FONT></SPAN></FONT></=
-P>
-<P align=3Dcenter><FONT size=3D3><SPAN style=3D"FONT-FAMILY: Arial"><FONT=
- size=3D3><SPAN=20
-style=3D"FONT-FAMILY: Arial"><FONT size=3D3><SPAN style=3D"FONT-FAMILY: A=
-rial"><SPAN=20
-style=3D"FONT-FAMILY: Arial"><SPAN=20
-style=3D"FONT-FAMILY: Arial"><STRONG><U></U></STRONG></SPAN></SPAN></SPAN=
-></FONT></SPAN></FONT></SPAN></FONT></P>
-<P align=3Dleft><FONT size=3D3><SPAN style=3D"FONT-FAMILY: Arial"><FONT s=
-ize=3D3><SPAN=20
-style=3D"FONT-FAMILY: Arial"><FONT size=3D3><SPAN=20
-style=3D"FONT-FAMILY: Arial"><SPAN><FONT size=3D4><IMG alt=3D"" hspace=3D=
-0=20
-src=3D"cid:2183279"=20
-align=3Dbaseline border=3D0>Wi-Fi Networking News: Crsls wf=20
-seeker&nbsp;&nbsp;<?xml:namespace prefix =3D o ns =3D=20
-"urn:schemas-microsoft-com:office:office" /><o:p></o:p></FONT></SPAN></P>
-<H1 class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN class=3Dbodytex=
-tbold1><SPAN=20
-style=3D"FONT-SIZE: 9pt; COLOR: black; LETTER-SPACING: 0pt">Tuesday,&nbsp=
-;April&nbsp;27,&nbsp;2004</SPAN></SPAN><SPAN=20
-style=3D"FONT-SIZE: 9pt; COLOR: black">&nbsp;|&nbsp;by Eamon Hickey</SPAN=
-></H1>
-<H1 class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN style=3D"COLOR:=
- black"><FONT=20
-size=3D2>&nbsp;<o:p></o:p></FONT></SPAN></H1></DIV>
-<DIV class=3DSection1 style=3D"MARGIN: 0in 0in 0pt"><SPAN=20
-style=3D"FONT-SIZE: 9pt; COLOR: black"><FONT size=3D2>Wi-Fi Networking Ne=
-ws has=20
-this<SPAN class=3d3-4> </SPAN><SPAN class=3D331482323-0305=
-2004>brief=20
-report on Crsls Wi Fi skr,&nbsp;</SPAN>a keychain-sized device tha=
-t scans=20
-for active wf (802.11b) networks. It's also handy for measuring signal=20
-strength within a given coverage area.<o:p></o:p></FONT></SPAN></DIV>
-<H1 class=3DSection1 style=3D"MARGIN: 0in 0in 0pt">
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT=20
-size=3D2>&nbsp;<o:p></o:p></FONT></P>
-<H1 style=3D"MARGIN: 0in 0in 0pt"><FONT size=3D4><SPAN>Gizmd.com<SPAN=20
-class=3D130050304-05052004>:</SPAN></SPAN> Best Wi-Fi Signal Finder=20
-Yet</FONT><FONT size=3D3>, </FONT><SPAN style=3D"FONT-SIZE: 8.5pt">04/22/=
-2004=20
-05:19</SPAN><SPAN=20
-style=3D"FONT-SIZE: 14pt; COLOR: #666699; FONT-FAMILY: Verdana; mso-bidi-=
-font-size: 10.0pt"><o:p></o:p></SPAN></H1>
-<P style=3D"MARGIN: 0in 0in 0pt; LINE-HEIGHT: 12pt"><SPAN=20
-style=3D"FONT-SIZE: 9pt; COLOR: blue; FONT-FAMILY: Arial"></SPAN></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN=20
-style=3D"COLOR: black; FONT-FAMILY: 'Times New Roman'"><FONT=20
-size=3D2>&nbsp;<o:p></o:p></FONT></SPAN></P></H1>
-<H1 class=3DMsoBodyText style=3D"MARGIN: 0in 0in 0pt"><FONT size=3D2>Glen=
-n Fleishman=20
-got a hold of the Crsls wf skr, a keychain-sized sniffer to dete=
-ct=20
-802.11b/g networks and says it's the best yet:</FONT></H1>
-<H1 class=3DSection1 style=3D"MARGIN: 0in 0in 0pt">
-<P class=3DMsoBodyText style=3D"MARGIN: 0in 0in 0pt"><FONT size=3D2>Push =
-the button on=20
-signal strength in zero to four LEDs. Keep the button held down and it=92=
-s a Wi-Fi=20
-dowser, allowing you to move around and see immediate response to differe=
-nt=20
-signal strengths.</FONT></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN style=3D"COLOR: =
-black"><FONT=20
-size=3D2><FONT face=3DArial>&nbsp;<o:p></o:p></FONT></FONT></SPAN></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT color=3D#000080>=
-<SPAN=20
-style=3D"FONT-SIZE: 14pt; COLOR: #333399; FONT-FAMILY: Verdana; mso-bidi-=
-font-size: 10.0pt"><FONT=20
-size=3D4>stargeek<SPAN class=3D130050304-05052004>:</SPAN><SPAN=20
-class=3D130050304-05052004>&nbsp;</SPAN></FONT></SPAN><SPAN=20
-style=3D"FONT-FAMILY: Georgia"><FONT size=3D2>Best Wi-Fi Signal Finder Ye=
-t,=20
-</FONT></SPAN><SPAN style=3D"FONT-SIZE: 8.5pt; FONT-FAMILY: Georgia">04/2=
-2/2004=20
-05:19</SPAN></FONT></P></H1>
-<DIV class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT color=3D#00008=
-0><SPAN=20
-style=3D"FONT-SIZE: 8.5pt; FONT-FAMILY: Georgia"></SPAN><SPAN=20
-style=3D"FONT-FAMILY: Georgia"><o:p></o:p></SPAN></FONT><FONT=20
-size=3D2>&nbsp;</FONT></DIV>
-<DIV class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT color=3D#00008=
-0><FONT=20
-size=3D2><SPAN style=3D"FONT-FAMILY: Georgia; LETTER-SPACING: 0.2pt">Chry=
-salis=20
-previous Wi-Fi signal finders fell short in ways the skr does not. The=
-=20
-displaying the results instant of a constant active scan--but it can tell=
- Wi-Fi=20
-from junk.</SPAN><SPAN=20
-style=3D"COLOR: black"><o:p></o:p></SPAN></FONT></FONT></DIV>
-<H1 class=3DSection1 style=3D"MARGIN: 0in 0in 0pt">
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN style=3D"COLOR: =
-black"><FONT=20
-size=3D2>&nbsp;</FONT></SPAN><SPAN style=3D"COLOR: black"><FONT=20
-size=3D2>&nbsp;<o:p></o:p></FONT></SPAN></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN><FONT=20
-size=3D4>ngdgt.com<SPAN class=3d3-4>: The wf=20
-skr</SPAN></FONT>&nbsp;</SPAN><FONT size=3D2>Apr 23, 2004</FONT></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT=20
-size=3D2></FONT>&nbsp;</P></H1>
-<DIV class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT size=3D2>There=
- were a=20
-couple of&nbsp;credit card-sized&nbsp;wf detectors that came out last y=
-ear,=20
-signals occupying the 2.4GHz part of the spectrum. He says it=92s the bes=
-t of the=20
-bunch and that it should be on sale by&nbsp;June.&nbsp;</FONT></DIV>
-<H1 class=3DSection1 style=3D"MARGIN: 0in 0in 0pt">
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT=20
-size=3D2>&nbsp;<o:p></o:p></FONT></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN=20
-style=3D"FONT-SIZE: 14pt; COLOR: #333399; FONT-FAMILY: Verdana; mso-bidi-=
-font-size: 9.5pt"><A=20
-href=3D"http://www.brdbndrprts.com/shnws/42831"></A><A=20
-href=3D"http://www.brdbndrprts.com/shnws/42831"><SPAN=20
-style=3D"COLOR: #333399; TEXT-DECORATION: none; mso-bidi-font-size: 10.0p=
-t; text-underline: none"><FONT=20
-color=3D#000000 size=3D4>Wi-Fi skr</FONT></SPAN></A><FONT color=3D#000=
-000><FONT=20
-size=3D4><SPAN class=3d3-4></SPAN>: </FONT></FONT><A=20
-href=3D"http://www.brdbndrprts.com/shnws/42831"><SPAN=20
-style=3D"COLOR: #333399; TEXT-DECORATION: none; text-underline: none"><FO=
-NT=20
-color=3D#000000 size=3D4>Hotspot seeking=20
-keychain</FONT></SPAN></A><o:p></o:p></SPAN></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN=20
-style=3D"FONT-SIZE: 9.5pt; COLOR: black; FONT-FAMILY: Verdana"><FONT=20
-size=3D2>&nbsp;<o:p></o:p></FONT></SPAN></P></H1>
-<DIV class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN class=3Dnews1>=
-<SPAN=20
-style=3D"FONT-SIZE: 9.5pt; COLOR: black; FONT-FAMILY: Verdana"><A=20
-href=3D"http://wifntnws.com/archives/003248.html"><SPAN=20
-style=3D"COLOR: black"><FONT size=3D2>Wi-Fi Networking News</FONT></SPAN>=
-</A><FONT=20
-size=3D2> takes a look at the new "</FONT><A=20
-href=3D"http://wifntnws.com/archives/003248.html"><SPAN=20
-style=3D"COLOR: black"><FONT size=3D2>Wi-Fi skr</FONT></SPAN></A><FONT=
- size=3D2>"=20
-and junk interference, something this latest version is apparently much b=
-etter=20
-at.</FONT></SPAN></SPAN></DIV></SPAN></FONT></SPAN></FONT></SPAN></FONT><=
-/DIV></DIV></BODY></HTML>
-
---= Multipart Boundary _EXTRA_0901041737--
-
---= Multipart Boundary 0901041737
-Content-Type: application/octet-stream;
-	name="retail.jpg"
-Content-ID: <2183279>
-Content-Disposition: attachment;
-	filename="retail.jpg"
-Content-Transfer-Encoding: base64
-
-/9j/6wJgRVBTAHic7ZjJigIxEIbn/Z/EiwfxoHjQgyfB5aKg4oKouIH7goow
-UPAdDJPpZKxMO0N/l5+mO92V6qSWfHwkJCT8d87ns+hmsxGtVqui5XJZNJVK
-ic7n8y/HX69X0VarJZrJZJ7G9fv9EGYHYzqdimI/mk6nRYvFomilUhFtNpui
-+Xxe1Jw/yv16vf40LpvNiv4VP2Hvcrn0GsfzzJvr2+327Tju4793YzabiRYK
-BdHJZBKLHcPhMJbvDgYDUeZvrnvWC/tFi6h1Y0J8Ox6Pqnas12tR1/nzn06n
-k6odJp1OR/R+v3uN6/V6Kt/fbreixE3iHvvD9/9pcblcvJ4nv0Gj0VCxI5fL
-icblh8ViIcq+0IL4/iqs39CMRiNRbT/YiCs//BWIi6vVKsj749pv2lBva8M+
-IK+Hej/5kvxIXW0qcdK3PqaPCYV2PUrfQJ3gWx9QV+CvKLTitA3sob/05fF4
-iOJnrXqJ/d9ut799jv7Et37ytaNUKv1oPH7xjWfUM/QttVpNlDxI/WfLU4fD
-4el6PB57fd8X376Bde26XogTtrrdjEfcJ451u90vvw9a9bQN7HCNj5zr2NYN
-72OezJv97Lre8D/7iPeZ5wb7/d7pfa/iGq/N8wlgv9DPaNdxvucp2rj2pZyP
-sU52u50ofvmtOjoufOM1ceS3/ELfHRf0+VHgj9B+0erXtWB/kXdthM4b1Ffk
-g3eDvGM7T7fZHeXXKDjPe/d4Rh4mX3FeEhW/8aurn+gD+Q/v7pdXwa9mvWdT
-4jv/4b+cL7jCOqB+QUOfbyckJCTExSfQUQHQ/+AAEEpGSUYAAQIBAGAAYAAA
-//4AJkNyZWF0ZWQgYnkgSW1hZ2VHZWFyLCBBY2N1U29mdCBDb3JwLv/AABEI
-ASwBkAMBIgACEQEDEQH/2wCEAAcFBQYFBAcGBgYICAcJCxMMCwoKCxgREg4T
-HBkeHRwZGxsfIy0mHyErIhsbJzYoKy8wMzMzHiY4PDcxOy0yMzEBCAgICwoL
-FwwMFzEgGyAgMTExMTExMTExMTExMTExMTExMTExMTExMTExMTExMTExMTEx
-MTExMTExMTExMTExMf/EAaIAAAEFAQEBAQEBAAAAAAAAAAABAgMEBQYHCAkK
-CxAAAgEDAwIEAwUFBAQAAAF9AQIDAAQRBRIhMUEGE1FhByJxFDKBkaEII0Kx
-wRVS0fAkM2JyggkKFhcYGRolJicoKSo0NTY3ODk6Q0RFRkdISUpTVFVWV1hZ
-WmNkZWZnaGlqc3R1dnd4eXqDhIWGh4iJipKTlJWWl5iZmqKjpKWmp6ipqrKz
-tLW2t7i5usLDxMXGx8jJytLT1NXW19jZ2uHi4+Tl5ufo6erx8vP09fb3+Pn6
-AQADAQEBAQEBAQEBAAAAAAAAAQIDBAUGBwgJCgsRAAIBAgQEAwQHBQQEAAEC
-dwABAgMRBAUhMQYSQVEHYXETIjKBCBRCkaGxwQkjM1LwFWJy0QoWJDThJfEX
-GBkaJicoKSo1Njc4OTpDREVGR0hJSlNUVVZXWFlaY2RlZmdoaWpzdHV2d3h5
-eoKDhIWGh4iJipKTlJWWl5iZmqKjpKWmp6ipqrKztLW2t7i5usLDxMXGx8jJ
-ytLT1NXW19jZ2uLj5OXm5+jp6vLz9PX29/j5+v/aAAwDAQACEQMRAD8A+kaK
-KKACiiigAooooAKKKKACiiigCK6/485v9w/yrnBXR3X/AB5zf7h/lXOVnMaD
-8KWkpagYopeKaKdTELxRSUtABS0lLQAUtJRQAtFJRRYBaPak7UdqLALxRSUd
-qACiikpALSUUnSiwBSUZpKACm0uaQ0WASkpaSkMQ11lcma6ytKYmFFFFaCCi
-iigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKAIrr/jzm/3D/Kub
-rpLr/jzm/wBw/wAq5us5jQUtJUsETTzLGvU96SQDBS9q249Pt40+ZA2OpNRy
-Q24QlYBgd6pQEZNFaPkRTKoWH7w4ZAf59KQaUrEg+YMd9w5p8gGfS1e/slcZ
-xLx23jmmnScchZD7eZ0o5AKdFWzpDdAGPuZTxTDo8xGAij3Mzc/pRyAQUVP/
-AGPOR9yMEdB5zHP6Un9jXGMhYgf7vmtj88UcgXIe1HSpv7FuByPJ56gu3FL/
-AGHMDjdFj1y2aOQLkGaSrA0OUnBkjA7EbqX+w5T1kjH0Lf40cgXK1HarP9hy
-7s+an5t/jTToc4PyyRkZ7swxRyBcr0lT/wBh3X3fMjxjht7Z/Kk/sS7wTmIE
-dAJW5/SjkAgpKlOmXMa72VBjjaJXx+eKng06aIhzbhww6CTO388UuQLlKkq9
-DFGXnUYDqOQ6/d9OKz53kjbDhAT0wODRyBcWkpiSb1zjFPrNqwxDXW1yVdbV
-0wYUUUVoIKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAiuv
-+POb/cP8q5uukuv+POb/AHD/ACrm6znuNBV7SB/pZ/3TVA9K0dHH+kufRKI7
-gaVxJtAUfkKigTzmLEq0GMAddx75pty7CRioY47YqWdSkEcEGELHaMDoO9ao
-kc9zbwkI0irjoKadQtAB+/U5OOOaWKyt4lwIlJ7lhkmphGigAIoA9BRoBAb6
-3HHmH/vk0h1G2A++3/fB/wAKsbV/uj8qNq+go0GVTqlqDje2f9w0h1W1UgEv
-/wB8GppJQnQYqubog9cUWAf/AGnbkZAkI9kNH9pQAgbZef8ApmazJPEunxKz
-NcsVU4LxozLn6gEVXfxtoUfDaiAfQq3+FAGyNWt2TcEuCB/0xb/Cj+1IdpYQ
-3OB/0wb/AArnLjxlpclvNNHq8SRRA/u0cebIfQA8gfhXO2njuKK6Lm9vGVj9
-xyGVfz5/Wk2kI9FGqwn/AJZXI+sDD+lSLfxuuRFPj3jIrnF8f6EgVLi9MUpA
-yhjc4/EDFO/4Tzw6ScarHx14bj9KYHQHUIwB+6n54/1RpRfIWAEM/wD37NVL
-LV7W/t1mtLqKaNhkNG4Iq0LjnG6gY77YAceTN/3xS/axj/Uzf981JHIHFPpA
-VJNQjRfmt7gj0ERNRLf2pP8AqbiMHuY2UVo0nanoBUktoLy1xFKwydyyK2SD
-WDPH5hmjkXDRkjPv/wDXH862Zs2eqwOjBYrjKOv+11BH60moQM9xvUgDaM0C
-ObgY5Ix1qyOlReUI55FHQGpV6VjNDQlddXImuup0xsKKKK0EFFFFABRRRQAU
-UUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUARXX/AB5zf7h/lXNV0t1/x5zf
-7jfyrmqznuNAa09FH7yU+wrL71q6L/y2/D+tEQLMob7TlMDkZ5qWYgXduvqW
-/lUMwH2jO4/fXiluJQmpWqkgZz/KtUSSXMhjdMNjrQLtAPmIrH1vUbaJwJJ1
-QgEjnk1xeoeJQVPlXQZR2AppaAehza3aQttMgB9Cay7vxbaxcBhn2NeX3evS
-OMqzM2P73WsefXGOV38n3/pRZAemX/jmKH7vI9+K56/8bSTpIkcgG8bMHPQ9
-a88m1VlYneP+AjFZdxqjY+WRs9aAOk1GW8vr5jcEtsOxRyQoHYe1ReRMo+RG
-qhaeN7y0Zf8AR7aRAgXDJ6Drmr0fxQu1BH9l6ecDrsbP86jlAv6bptxdyASo
-wWtxvCmI98bPn0rlU+KupbsLY6cgH/TNv/iqX/hbWthfltbAfSNv/iqXKM07
-zSrq3ztDHHtWNLNdwtgpIMfWnN8WNcY/8e1gR7wn/wCKprfE7UpIyr6dprZ/
-i8o8f+PUcoHXeCvEGyC4tLyNtpZTFKo+dHPHBrdtfHyBzDLIC6naTngkV5PN
-451KeNkihtbbd1aCPDD6Ek4/CqdtqcqoPnyPfmrWwrH0Ba+NrX+PKmtyw8S2
-d2PlnX8a+fLHWpNoBIx6HofyrZtbyZ+Vl8v2BosB7/HeRSAFSCPWpldWHFeS
-aL4gubRsPMGQ8ZY13mk6yt5GoLLux0FFhlnXiqfYZT1S4BWrN+sZkUsVzt7j
-ms/xFMv2G24588D6cGruqCMPE7A5wQMH6UCM1442huHRNpGO+e4qqtWZJT++
-QgAFRj3FVV61lMaFNddXImuuogNhRRRWggooooAKKKKACiiigAooooAKKKKA
-CiiigAooooAKKKKACiiigCK6/wCPOb/cb+VczXTXX/HlN/1zb+Vcx2rOY0Fa
-2ifdn+o/rWRWvof3JvqKIiH3UqpOp2jd5i8Z9xWXqN+rapbyKeF64/Grmpys
-nRekg5x2rm55AViOex/rWyJZxvjy9m+327CZR8r9T15FcVNqDLnc4zn+E1t/
-EmbyruxYKCdrdfwrhpboMuWUhqFsM1JL7cAMkLjjmqktzu6ufzptoqyvFLIR
-5WcYIPzeo61o3Ediuwx2ygd8MT/OqUbptB5GFJM23apOPrVUyE+9duttZLaI
-psrRmZc7nXnn8azYNNsZZmMlshVQMknaCScDAyO/cnFP2ctPMLo5RpB0IqPc
-A3cD1rqrvSCLeWXToINqbmMbqCcDhsFhnI7g4x15FZsIjTTY3+xxS7VJdiCT
-1PvWkcPzaJkOdtzIRv3mMblBp24EnHA7c9Knl1GBGZFsIVbpkKeP1pdQN35C
-maCKNM8bNmf05qXRSV7jUr9CqXx6cd6A47HFQjJU4IxUeXXkZxWBZdD89TU6
-OVHUcVUtAk1xHHNL5aM2C4XO0fSu+b4W6hKJF069guniuGglVh5e0jbyM9R8
-4ppAcpFckY2gAita11B2wueB2yRVvSfAeo397cRebAq21wLeUo285PcDpjkc
-kitSL4a658rGayIxniQkqME88eimnYQWN6q7QxY+x/8A112OgaqLeRGVlxnH
-DVhH4f6tbmLZdWg4VXLORhycEDrke/6VFeaRe6MYDKVdW+86IxCtuYYJOOfl
-NMD1fVLpbnRbeQDP79efwNdDqRxFEQoY5wPUcV5VoOqvcW5tHkyA6uF/Tj86
-9Uv2P2aHacEkfyqWBz9ywF22DjK5x6UgpL1sXmNv8PJoHSspjQ8111ch2rr6
-KY2FFFFaCCiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKAIrv
-/jym/wCubfyrmK6e7/48pv8Arm38q5es57jQnatfRGCwzE8fMKyDTo7qSAAJ
-naWyQO9EBMs6y7iAFXGN+evXrXOSOMIcdj/WtnWpI/ssRJbJfgAdPlNYEr5C
-jFaks83+J74ubDB52OP1FcCzgnmu0+KUh+3aeOmEc/qK4oCOOLzJF3ZxW1Cj
-Kpe2yBtI2dO1G0FrHbXSKpQOA5ztZWGCDjkeoIzg9QR01mjguYVKqjI2NxyA
-Om0nI45HUDPtiuU+02skaq0O0AdagtZZ+Vh3kg8FTirhGMXZy0aKlBtLlV2d
-fc29vLfCUbD6EtUEloBbSqH/AHTHJwc8DB59Og/KsCSTVYx5rSz7Qc8SE4/W
-q7vd6lmKMSyt3y2cVSrxs5SltsEsPVUlDkd2acl6sNrKyz+ZKzS/dORlxhiT
-06dhms1J3itInU5AU8HoeTTn069srFjJbsVySWUg44p8enXM+h/alCCONDnJ
-54Jp0sbh4QUnJbNfPohzy/FObjyPv8u5BLrLSxMhhgGRjiJBj6cVHfscD60a
-foeo6lE0lrb+ZGvBYsAB+dadt4a1nXkLWtniMHHmO4AP09fwrmeY0Iwn7WaW
-nkL6pVbi4xZz6thTzjigOe546Vr6n4R1rR2iW7tCqysER1YFST0GR0/Grkvw
-88TW93BbPpjtLPnYEdW6YySQcDqOtcP17DWT9otdtV0LdOa0aMrRVsn1+xj1
-Bitk06CdgcYTIzz9K7+ax8KyCS5h8Tyw+Yskgt0mJCsCCoJI3cgeh5AriTp9
-34Z8X29vqNks01vNG8ltw+8cHbxkHI/nXWya/pi63YXOm+Ep4JrG6Mk4WPBI
-wTtIA49eemOOK6ac4zjzRd0yGrF99O8Gec5i8V3ex5GJzJ0wPlJOM+nOD1x2
-qKybw6uuTp/wkN5aWhtk8qZGLbmZcOp+XPUn8AfWpZL7T4WiRfAM8ZAjZmiR
-ZNy43FfukdCCT97jBqxqmoQmC4sE8AukjRukUiRh/LLDcCCq8kBvXjA96uwi
-vJZeFF06a6tNevJJY4TIULYywICryo5O7tnG01zdrqchi8oOxQncVDHGf8k1
-kz2l3ZGMXNvLAZFDp5iFdy+oz1FPt5xG38J+tIZ6L4Mu1k1qOHaOcD6c17JP
-qHmyLbnG0Pw3fp/+uvCPAN35niy0jOAWzwB7GvXo5WXUiM5j3kOufrj9aGLq
-WL0sbxQoG3bxmlXpUN8f9JQg4G3pnpUq9KymUh/auwrjweK7CiAMKKKK0EFF
-FFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAQ3f/HlP/1zb+Vc
-vmuou/8Ajxn/AOubfyrlqznuNB2qN2IAx68U/tVebqADRETJtYlP2a3AjUkv
-ySP9k1hSEnb06Vs6x532O3AYhA3r1G01hvuCDJzWhLPMPikA17Yf7j/zFcTD
-P5ahXUkCu1+KKFr6x29o2/mK4iO5jKgSRZx3FdmEny3alb9RS9C2Ire4iBVc
-EcEgYIqWJI4tNZRIY8/eYD3qobtY4tsCYz3NR2941upjlUPG1TiJRltv5HpY
-StThL3uxoWFxaWquDdtIrdip4q1bxwx6M7LMYkc5MijJHNZ8NzYIdy2rMfTP
-FSWmpfZDLbzxB4jk7TxtryK9GUlePc9jD46jTahUa2aVr6X7vf7i3p99p9gr
-q+oNKr/wsh4rQ02OGbw5NHv2QMXG49lz/hVOws4r+XfYaFNLg4Mj/LGp92Jw
-K6ODw/PFpM1ndzWdsZA3HmZxn8MfrXHVwtSavBO91vY6qePo07RnKLSjK1r9
-baXfco6mksPh62i07aLN2VZHXrtJH862PEsOmQafaW19qM9jbDIUQxkhsAdc
-DtTdFt9L0vTnsbvVBPEeNuxeAeo+8a1oH0OawFnqd0t5CvCF4QDjtk7uvuMV
-w1MsxUZJqN1GTd01d3669UcNTHUKkW07XitNdLdPQy4vEnhweFTo66pNdyDA
-iaWF87t2VGcdjitX4n+JtW8OW2nHSrnyDOzh22Kx4xjqDjrSXFjpCadLb6Ba
-6aJJxgs8uHxntgN/MVg/EeXWNehtFbQZoBalmLRyCbg46henTvXNSyeTxdOT
-pvku2+ble67LzPLrVk4tX18jhotV1bWfGFrfPItzqTzxhC8YIZgQFyoGCOB2
-r0T7N4+0rXL/AFIzafBcXUYabjcrJEqjcBg9mA9eTx1ryoHZeOULhgwKsowR
-/hUx1jU2JJv7rAOcmVs5xj+VfXwhGEVGKskcG56sbf4i2k8e7UtPV4FWIjeD
-gPtXLYHGNi8nHt1qPTbj4h6tcXkEWoWYfT5/JdJU2gttPYrgjGT839a8rXUL
-47Qb2fAxgeaeMdKDqN8lpLbLdTeRK4kkQMcMwyMn35NUFj07VfAfibW4bVr6
-/smmt0MS5XYNg27cELkn58YIGK5fxP4Z/wCEXuLaF7xbh5kLErGVA54wT14r
-kftU5JJlkz1J3GnCeRsFizY45PSi4Hd/DyVR43sAOnz/APoDV7KCE1ncG+YS
-tx69a8K+HU23x5YAjnLjj/cavcXKjWnHIPnNt+uTSewupdvyDOhc/Nt5qaP7
-oxVW+G2VASD8vBFWIsbBj0rOZSJhXY1xorsqKYMKKKK0EFFFFABRRRQAUUUU
-AFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAQ3f/HjP/wBc2/lXK11V5/x4z/8A
-XNv5VylZzGg7VXmIDj6VY7VVuMbqIiYurRoYLbMgzvyBj/ZNZEigADPatbVG
-iCW4wxbd36D5TWU+DJWhLPLPikxW/slH/PM/zrhFQkHOK774mqG1az4yoiPf
-3rhN4LEKOKa2GQtgLxURYmvSofh5pOoaVpaQaq8OrXtutwIpCGUrhy2FAyMB
-eOec4pH+E7JYfvL+OOQO7mc7ivlCJZBlMZDYPr+HenYDzmCXY55A4ru/CGk2
-EttPrepBXiQsI4nOQSo689eSAB069cYrN8VeA/8AhFtOgnfUBNO91JbsoTai
-7QCDuPqCOP8ACqlitybGNftMJhg6ASeuT/jV0VGVRQb3CakocyR1l1qWoXOF
-MpgjI+WOLjavpnrVUQ+pLE9yetdD4Z0i21/TmurrUIraOAhXXGZH/wB0Vu/Z
-vDOnKRFYyXjBM77iU8n02rjFfSxVCi+WELteX6s8tupPWUtDhxCiIWIGAM8i
-mxbJoydoBHY1vXHiaQ/Jb6Rp8KdAPskbf+h0638UlFbz9D0yQ+v2VAf/AB2u
-jmqW+H8TK0e5zUsC5xgCmpdXdowMNzImP4c8flXWSaz4XvP3eoaQbNjwJ7Vy
-uPwbg1n6z4bji006npl+l5YhgG3DZImTgZXuMkcis3GjUfLVhZ+a/VFXnFXh
-Izp7PT/FWnXRdUg1uBd6yjjzh7nvzjOegORgAg+cFNiASqeCeM13NxaCGO7K
-sRJFCpyP9p1Qj8mritWPlahcRMRuSVgT7g187jaUaVVxhsejQm5wTkUecnFG
-T70xQSetTKVGBjNchuIqkngCnhSOODSlgVGBj2FCYz1waAOj+HpKeP8ASsDr
-KR/46a94nYjWpBj/AJbnn8a8F8Ckp480j3uVH58V7vcE/wBsyHt5p/nUvYXU
-v3xBaIqpC4IGanhP7tfpUF6xJjLLg4IxipYWBjXjtUTKROK7OuLFdpRTBhRR
-RWggooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigCG8/48Z/+
-ubfyrk66y8/48J/+ubfyrk6znuNAelVZz89WTVSc/vDilETDVZQVgURrwTyP
-pWVIRn04rV1VpykOQdnP8qx5mwDxWhLPJvitPs1ayUf88j/OuFjuOeOK7T4q
-Ef2xZggf6k/zrgx7ULYZqrf3HmROJ5A8QAjbecoB2HpSy6jeuHY3k53Elv3h
-5JGDn8KzBJjGalWQMKYxZ726uFZJrmV0LbyrOSC2MZ+tXNNkZdsYJCtyR64q
-iVBOas2BxdovoP611YP+NFea/MyrfA/Q7nwreGG8mj5IYAYrqdQMn2UZljQf
-3VOD9K47wwXXUJmQDhRnP1rT1G6k87DYUei/419XWpOckoyseRTmox1VzRiX
-ThCxkf8AeEcDBqSzNiyMJnAOMAEVzyTCRsHJ/wCBH+lK52Dcpb/vo1yyy2lJ
-NOT1ZssVJWslodHZWNtdyFM457c8VJo2nQ2/iy3syQ0E0gUx4wp5A6VzttdO
-HBWU5B79fzFdJpEs7+LdIlfBQ3EYz/wICk8POlzPnvHl28xe0jO2lnc5iY7r
-bU2PU26E/wDf+OuD8QEjxLqa+l1KP/HjXoMrQxRaoJo2YCAcK2P+W8ftXHeI
-5tOPijUsWcxb7XJuYTjBO9skfL9PyPrx4WZSarPS/wDwyO/CK8bXH+FvCU/i
-WG/kguUj+xxiQxhGeRwT/CqjJA7+laUPww8WStAF0sjzk3qWlQADj73Pyn5h
-wfWrPw0sNXv9auBok1vZSRQ+Y1zPAspQ9PlJB2k5P4Dvit7Q7zxlqmoajbz6
-qIZtNgAlDWKSPKhIABG3LcYPNcSd0dLVnY5TxD4F1Dw3plnf3JBinQbwwCmO
-QlspjPONvX3Fc6ABxivTdY0LxrrOmrZJdJeaf5UcypIkMOCVZwFA5zjd0wex
-GK5bxB4Ju/DnhmDUr+VFuJLnyGtlIYoNgcEkHg4PSmIreDm2+NtH4/5e4/8A
-0IV7vcAjVXYHjzOlfPvhKfHjTSCP+fuL/wBCFe/znOosQcHfUvYXU0r4uPL3
-nJwe9S25zCnHGBVe8GFiw4brzU1sT5CZ9KzmUi0DxXa1xI6V21OmDCiiitBB
-RRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFAEN5/x4T/9c2/l
-XJV1t7/x4XH/AFzb+VciKzmNC9qpTn96QKuE1QnP75h70oiYupKQYiXU8HgH
-6VlTd61NRMe+EKW3YPXp2rLmyWYVbJPIPisf+JxZf9cT/OuCzxgV3vxYGNas
-h/0xP864HpQthjgfloDEd677RPAmj6n4O0+9uNVe11K/laG3RiCjOHVQNuM9
-GyTnjFOm+EuoQPNE2oW5nSAzpAqnfIAzKQoOM/cz9COKqwzghI2Kuaad10P9
-0/zrpPG/gaHw3YW+o2V35lrK0cTRPnejtErnnABHJ/SsDSLYmJrjIwhCY+uT
-/SurBfx4+q/Mxr/w36HT6A2Lqc89B061Y1i5eJkEURZmYIqk4yar6A22edgO
-cCjVnP2i3LEZMw4/CvsZfGeKvhK//EyDHD2kZ9Pmb+lDPqSj/XWbj0O8f0qX
-zeTSq/qCa05BXEs7qYzGKaEIwXcCrbgwrr9KfbrGksCxP2iM4J6fMK5O2wdR
-QKmf3RP6iur05wb/AE9+AFmjzxjowrmrr3X6GlMyPEP+j3evR4+6pXH0uI64
-jX8f8JJqRIHN1L/6Ea7bxgANV8RY9X/9KY64PxJIB4m1MZ6XUn/oRr5fHu9T
-7vyR6uGXulvQ/Feq+G3lfS7oQmXbvBjVwSpyDhgeQehqGTxVqjzalIbn59SB
-F0di/vMtu9OOfTFYfmjbt6VGzH0rhOg6yP4heJII4o49UZUiVVQCNOAqlR2/
-usR+NVda8X63rthDaajqD3EEbBlRlX7wG0EkDJOOOa5sORTw3HUj2poDc8LO
-R4t0gg9LuP8A9CFfQs5H9ptk4O4Zr5z8OyBPE2mNj7tzGf8Ax4V9FXGP7SYn
-++KmQupqXYAjiCsSMnqKmtMi3T6VBeMHjjwoUAkcVLaf8e6c1nIpFxTXb1wy
-13NOmDCiiitBBRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFA
-EF7/AMeFx/1zb+VcjXXXv/IPuP8Arm38q5AVnMEKelUZhulJzyDV09KoyY81
-ue9KIMTUXRpYVWMKcNzn6Vmy/eNamptOZIBICEw2OPpWVL95qtiPIviyD/bV
-l/1xP86XwZ8O4vFHhm/1CaeWOZCUtFRlAdgMtnPYZXPTgk9sUfFUj+3LMf8A
-TA/zNcpaatqGnwNHZ39zbxtyyQysoY+4Boi9BpHZeEvBsHiPS7OefV5rfZqn
-2REWX5QCm4mPg/NkD24rZsPh9rT3kb6h4iu5bWeI+ckU7htrI7oNx4bocj3r
-y+2vb2GJBb3M0aK/mBUcgBumeO+O9K2q6kqRIL66CR5Ma+a2Fzwcc8VWgM7H
-xf4UuPDXhC2ur3UJ7u8a8EbK5JhAMIYYB6kA4yPp2rndMaSfTXlwiosioVRQ
-MnDYP6frWZd315cWccNxdTypGRtR5CQvHGB9KfpUsiv5QYhDyV7Ejp/M104K
-KeIi/NfmZ15NUmvI6rRJNkkoGByDUmsqJJbd17SjI/CodDIE0h9xzWnqNr9o
-t8RvskVtwOM9q+yk7TPEirxMgHnpzU8ZBIBNRLY3m4k3MBwO8R/xqT7HeqoI
-ubcg8f6o/wCNbOSISHLIiaqgCn/UnnPvXRWM4Q2zFflEinBPXkVgWFlI12ZZ
-5Fd8bRtXAArUysBUHsQcVzVUmrGkdNRfHimLXfEakfxSEf8AgRGa8z8SuT4q
-1Qg8fapP/QjXp3xMkUeJNbK8Bx/7UjNeW+ITnxNqRz1uZP8A0I18ljHefyX5
-I9ehsZ+c0ozjFIBg0/FchuAA9KCM9KVR6U/bjGRSHYs6S5TWbNv7syH9RX0n
-M2b9iB/EK+bbVwlzBgDiRT+tfR5YGZiB3HNJi6mxebjDEXGDnjjHFPs8eQuD
-61HdZWGPcwY57HOKdZkeQPqf51MxouCu7rgx0rvKKYMKKKK0EFFFFABRRRQA
-UUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAQXv/IPuP+ubfyrjxXYX3/IO
-uP8Ark38q44Gs5ghSeKoSEea3+9V09KoO375hj+KkgYaigWeE+ajHa3Cn/dr
-Nl6tWhqBiFxDs37tjdcY6rWdIRlqsR5H8Vv+Q3Z/9cP/AGY1wRcgc9K7z4q/
-8hqz/wCuJ/nXAP0pIuOxPDcmNBipBdbiQVBqipwo/lSgkGqGWxIHd81Pph/0
-v2waz1fBIzV/S/8AX5x2rswC/wBoj6o58T/DfodRpEvltKfcVsedGyt1OR1H
-auesWwZB712Oh6RqFnfwS3lg/wBkmwjF8DhuBn05I619diZqnHmZ49CHO+Uw
-d7FXI6Y61JHI/wC7jxjnNdf9jtLW1d1sgJNOQwyszqwaRgoUkfUmtTVfsWmv
-bRzJH9onneNXFpG5YjaBknGMZ6gVw08w59OQ6auEVPaVzzm1uMXJ3cDnvUrX
-I3sgOQDwaseJbT7P4tv4lOESUgHAHb0AArLZgZRtHOMfWvRVpx5u6ON3TsXf
-iTceZrd5IMYdQePqleea3h/EF847zuf1rsvHTk3QJ6lFP/oNcTqB36nct6yH
-+dfH45WqNen5I9nD6xIZVVXwOmBSdqV23NnPYU30riOglQc4BzUj/dXgcVCh
-xTmdcYFAyaEgSxn0Yfzr6PVskntkV82Rtgr9RX0fC52ZxxgH9Kl7Evc3LnYL
-ZAhLfNzke1SWZHkDjuainZGt02JtAPPOc8U+0P7r8TUyGi4CMV31efrXoFOm
-DCiiitBBRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFAEF9/y
-Drj/AK5N/KuNHSuyvv8AkHXP/XJv5VxYrOYCk8VnOf37f71aB6Vmyf69uf4q
-SAW/eNriERxBSEbJyT3Ws6Q/e4rT1FpzPD5iFV2Nj5cf3azJM5arYjyP4rkD
-WbL/AK4n+dcAzfLXoHxWQtrNmR/zxP8AM150+4DFJFrYcn3BS55qJX2qKTzO
-aqwXJB1NaWk/8fH/AAGssHitTSR+9J/2P6iu3L/94j6nPif4bOi08gM+SRzX
-oqeJ9CM0U1+Bfzq6bZRa+W4Udd/OG7ce1eb2iusbMY2COflbHBxVjkkEA/lX
-11ahGra72PFhUcFoeijxPpW9t9xE1x5e2O6EMmVG7OGOd3Pt0qQeKdBbykl8
-ssDIxkjhYKuWUkBT/eAPPUV52OnINIwHoa5/qFPuzT28ux6LdeJ9H8i8dJbS
-WQxP9mDW7Myk4wp3LjHH0rzue4aa8eZwNzks20ADJPYDpTQh7Bqjm/dLuYHL
-cCt6OHhSTUepE5ue5V8Wz+d5L9flA/lXKS/PO7dyxroNecPHCoPRa50/fP1z
-XyuYq1eXr+iPXwr9xDcCk9qcVxzSY9BXn2OkTNJnilpCeMUAPQ8gD1r6PtiT
-AjZ6qD+lfOETsj5VipPHB7V9G2hJtIiDyY1PH0qXsJ7nQXMjNaIQioA2OBjP
-FPssiE59TTbsTi2TzifvcAnpxS2nEZwf4qmQ0XAa9BrzwGvQ6dMGFFFFaCCi
-iigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKAK9/wD8g25/65N/
-KuLB4rtL/wD5Btz/ANcm/lXFdqzmAE8VnSf69v8Aeq+TxWfKR57D3pIBdQRl
-uIS0qv8AI3Rs/wB2s9+rc1dvhEs8OyQsdrfw4xytZ7nlvrViPKfis5XWLID/
-AJ4n+dcA4V4zxzXd/Fk/8Tmy/wCuJ/nXAbuKSNFsRCImMMKhPBq2pxGB7VFJ
-HxlRzVJktDA3y1qaRIPM+dtiDqxBx9KyCPlFWbK5ktZN0YUgjDIwyGHoa2o1
-XSmpx6GdSCnHlZ2a6hG1vEjXW+JB+7TJwgPJGO3NPinimbbG+4+grlJ9RkvS
-MwxReWMDylxn61WRZ5plhRmy5C4B616LzafY5Vg49zu4Skyjy5N3uOR+lOmZ
-II2d2OFGTkEVnWMP2CNrRZg7wnaxHY9cU3UrtrXT3mkRZRkDY/RvY170ZRdD
-23TlucDTU+TzLUOp2sqbkmU46ru5FSi9tHT52XHuc1zt7p9jcaMmsaRugZGC
-XFvuJ2H1B9DVWzKT27/a5pFAjYgqAfmAO3Oe2a8JZs7/AA/id/1RdyxrlzDN
-dH7OQURQOBgVkZ5HrROZEEYLfKVDAVGGIxXn4iu60+ZnTSpqEbImJ5xSZAqN
-mO7igNWBqOYg8YpuR3pM80vGaQDkI3CvomwIOnQnpmFT/wCOivnQcMK+iNPY
-f2VATwPIU/8AjopMXU6WaMRwKPMRzn+E9KfaY8s4/vVFOIVhUI7Oc85XFPtD
-8hx61EhourXolecqa9Gp0wYUUUVoIKKKKACiiigAooooAKKKKACiiigAoooo
-AKKKKACiiigAooooAr3/APyDbn/rk38jXEdq7fUP+QZc/wDXJv5GuHrOYAel
-UJ8ecfrV09KoTn98aEA2+eNpYQkQQ7Wyck56VnueWrSvzcFoDLnZtOOntWY/
-3mqhHlHxZ/5Clif+mTfzrz7PFeg/Fj/kKWH/AFyb+dedk4ojsWth4+6MUmeK
-aGwKYW5pgKU6U5AQRQMECgYB4pkksP3HPvitfwreQ2PiuwuJ4leNZMENjGSC
-AfwJB/CsZDiL6mu0+GngOXxvrUqOzR2duuZZV4IJB24/EUpbCbsYsF2+n6zd
-W92rKzykkkdDmk1u7F3AFjJMYPJxXaeObbw63iGDRZbgx6hYxCKa+jTKyHnh
-gO4GOfXI6AAUz4d8O29mfP8AEiTgjiO3t2LH2OcAfrXZHMav1f2HQx+rwc/a
-HN6DEq+F9enlbCeWiIp7sW/pj9ay4WBgdParmtX6eXHpllE0NjC24Bj80jf3
-mrMhf5setcS7m45mE0cYYY2Jt+vJpjRDbkelLGMZFPb7hpgivINrkdqTbxwK
-dLy+fbtTOQKBi0CmjOaeM4wO9IYDqK+htNIOiwE5x9mXP/fIr58TaFIK5J6H
-0r6C0vA0G3JXI+zLx/wEUmSzpJ/I8lRFvznndipbXHl/jUM8kbKoSIJz6k1N
-a8R/jUyGiyK9IrzcYr0inTBhRRRWggooooAKKKKACiiigAooooAKKKKACiii
-gAooooAKKKKACiiigCvqH/IMuv8Ark38jXC9q7nUf+QXdf8AXFv5GuFzUSAD
-0qhcH9+1XSaoXP8Arj9BSQmNvFjDQFZdzYPG3HaqTfeb61au5I/9GCxYOSN2
-f9mqjnDNVMDyb4tNjVbAf9Mm/nXnh5FegfFw/wDE2sP+uJ/nXnobihbFIMn0
-pMUuaWmMUdKUUoXjpRiglirxHj3Ne7fBqXT9K8HXrzXyw3M7+bgngKBgZ/HP
-5ivGLawa70yaWHDSQnLJ3x6/59/Smx6pfWoZY7qVMpsbDHlcYx9MUOzJauX3
-mk1DVbrUZvv3ErSc+5zU4GAcVVsMi0QH649K0VjBQNkD1oKMzVbR5lSSNMkc
-HFZ01nNaeQ0q4E0YkT6ZI/pXSBgxCIQaj1y48/SbKGSGJBa7kSRR8zgnOD7A
-k0COcTuak6jFNXhcCtzw5ZSXzXkUVrBO5iwPNONpz1Bxj88fUUxnPONuPpUZ
-r0iDTbg2wUeHNNkZcBd8yEtjHPH59f65qWugXdrHJDLodlKMsSJLlMrkjHPX
-j69O1Kw0cEOtOrv7TToWmu4l0GwRocKxlnOMYJJHHI9/pWUvgvUL5pLuBLaG
-BzuRDMMLk8L+AP6UrDOXA5r6E0fI8O2hwD/oqcH/AHRXhF5YyWNw8EwAkQDO
-DkcjNe9aGG/4R6yK/e+zR4x/uihiZ0E0pk2gxov+6uKmtxiP8ahnMx8vzSxG
-Plz6VPAP3QqJAiYCvSa83Ar0inTBhRRRWggooooAKKKKACiiigAooooAKKKK
-ACiiigAooooAKKKKACiiigCtqP8AyC7r/ri/8jXB54rvNR/5BV3/ANcX/ka4
-AGokA4niqN1/rPwq2TxVK5+/+FJALdtOIYA64jPT5cdqosOScVaulASAiVW/
-2Rn0psVlc3EMrQoWC4zg9Pw79KqxJ4z8XB/xN7ADOPJP8688A5r33xh4Oi8S
-6aF81YruLJibqM+h9q8qm+H3iGGQobEtjujAihO25SOZCjPJI+lKBiuh/wCE
-G8QDk6dJ+lA8Ea//ANA6X8qLjuYSnAprEiuhHgvXgOdNm/Km/wDCFa9/0Dpf
-youDMS1vJ7O5WeByrD071pWq2mqTnzWELnoBgAmrY8Fa7j/kHSflTv8AhCtc
-J40+QU7oRL9jlgXJhcqOhXlfzFEcm7gRMXJxtAzmli8L+J7cjybedSPQ1K+h
-+MZUKsk5U9RupAJLdi0T/SFSP/Y/i/8ArVgX1+97NuIwg4Va1D4L8RO257CR
-j7kU4eCde/6B7/mKLoDABwMVe0y8s7SSRrywF2rLhVMjJtPrxWj/AMITr3T+
-z3/MUh8E6/njT3/MUXKTF/tzRBMrL4eAUZOPtT/z/wA9vxRdf0wXMztoiNDI
-EHlmU5XaD0bGeTgn6Un/AAhOv/8AQPf8xTv+EI1/H/IPf8xRzDuhW8QaRuLR
-eH4o23qwJmZuAQSMHjnGPxqxH4m0zB3eH4TnkqszBc4wSF5A/pVf/hCdeA50
-9/zFC+DNf6DT3p3C6K+rXunXcEIstPNrKM+ZiQsp9Ote2aArf2Bp6N8rfZ4x
-zxj5RXnnhr4dXsl7HcasixwociEHJc++Ogr1BIxbpmTCKMDjtSZLfY0Jl2eW
-d6tkdj0q1Af3QqpKqAoEfd+GKswnES1EgRYB4r0mvNAeK9Lp0wYUUUVoIKKK
-KACiikJxQAtFNLhRkkCq4vDKWEERk2nBI4H60AWqKqfarnfs+xvnGeox+ecV
-JFcF3KPGUcDO00AT0UUUAFFFFABRRRQAUUUUAFFFFAFbUv8AkFXf/XF/5GvP
-s16DqX/IJu/+uL/yNeeZqJAKTxUW2KSUq23IGfmJFPNRsaSYD3jjaNUaRdi9
-BuOB+lS297b2lrLCI1bzBgtlsiqTHioHbjinzAOlW2Lkgj/gRP8AQVWkWD/n
-pCPxb/CmyNxVSU1PMIc6Wv8AFcR/QBv8KryR2x+7cQge+7/CoZKgYUcwE/l2
-4/5eof8AvljTCLMHm7X8ImP9arstRlaXMBcBsO9y/wCEB/8Aiqd5mnD/AJby
-f+A//wBlWfto49KOYZoiXTx/y3f8bb/7KgPp+f8Aj4f/AMBv/sqztwHalDj0
-o5gNPdp+eJ2+n2c//FU4tppHDtn/AK5N/wDFVliQelOEg9KOYDSAsT0mI/4A
-f/iqeEsu0+Pqp/xrMDinBhRzAaQjtz0uox9Vb/CnrHFji8t/xD//ABNZysKe
-CKOYRoiKM9bq3P4sP5rUq28R6TQH/toBWauM1OmOKOZDN/TjZ2brK8cMzD+F
-pV20kyR3M7uFQBmyVEi4rJjIzVqMinzBY0DBE2N3BHpIo/pSRY2DHT3OagQi
-plOBxSbuOxMDxXp1eXg16hVUwYUUUVoIKKKKACqmpXDWti0qjkVbqG7hE9s0
-ZHBFAFZ7W1ji33dwWBx8zvtH4Yps7s9gh0to0Qv8zjACjv1/Cq9u3m6cYpBm
-Wzbv3X/9WfyqNI4JC9w8BlPmeXFCvRmxnJ/D+VAD/t8kVg0S3iz3Och0XIA+
-vQ1bjlMotLjAzIm1iPX0/nTRGQqpd/YokPSILyB7HI5/CgW/2Oz2MQVSbMXP
-UH/9ZoA0aKKKACiiigAooooAKKKKACiiigCtqX/IJu/+uL/yNefY4r0HUv8A
-kE3f/XF/5GvPe1TJANYVC2fSrIAIpNoPapsIoPn0qB8+lahiU9qaYUI6UrDM
-ZgfSoHQntW4bePH3aabaL+7SsI55oSR0qI27eldIbaL+7QLaLH3aVgOXNo56
-Cm/YpMdDXV/Zov7tKLaL+7TsByX2GT0o+wS+ldeLaL+7S/Zov7tKwzj/ALBL
-/dpPsMv92uyFtF/dFH2WL+7RYDjfsUv92k+xyf3a7T7LD/cpPskP9yiwWON+
-yyf3aBbOP4a7D7HD/cpps4f7tFgOTELgfdNOETD+GunNnD/dpptIc/dpWA5x
-VYdqeu4djW8bSHP3aT7LEB92iwGOrsD0q1FKeOKu/ZYs/dpRBGOgp2GMjk4q
-wj8UwRKBwKeFAoAkDV6pXlIAFerVcAYUUUVoIKKKKACkNLSGgDKuAbHU47oc
-RP8AJJ7D1qe2ihsd9uLtd0rEopIyOOMetXGVWGGAIqA2FqUKiCMA9QFxQBQG
-lTNEUkSEMfvysSxPvU1uiTzRrFlra3XahP8AEfX/AD71N/Z1uQAwd1H8LuWH
-5E4q0qhVAUAAdhQB/9k=
-
---= Multipart Boundary 0901041737--
-
-

mozilla/mstone/data/en-3k.msg

@@ -1,57 +0,0 @@
-From bownrdstrm@attb.com Sun Jun  6 07:52:37 2004
-Return-Path: <purgcrw@attb.com>
-Received: from leggite.example.com ([207.111.254.118]) by snacker.example.com
-          (Netscape Messaging Server 4.15) with ESMTP id HYW65I00.GCU for
-          <exp@example.com>; Sun, 6 Jun 2004 07:41:42 -0700 
-Received: from accfd8ce.ipt.aol.com (ACCFD8CE.ipt.aol.com [172.207.216.206])
-	by leggite.example.com (8.12.8/8.12.8) with SMTP id i56EpkRt007759
-	for <exp@example.com>; Sun, 6 Jun 2004 07:52:03 -0700
-Received: from [220.15.207.252] by 172.207.216.206 with dazzle SMTP;
-	Sun, 06 Jun 2004 08:52:37 -0600
-X-Authentication-Warning: ryder ancestral 
-Date: Sun, 06 Jun 2004 08:52:37 -0600
-From: "Stphn Hand" <bownrdstrm@attb.com>
-Reply-To: "Stphn Hand" <resceflblb@attb.com>
-Message-ID: <3749823059370.835538001008932913@chckwll>
-To: exp@example.com
-Subject: 
-References: <168425683841079245159@duke>
-In-Reply-To: <7406146144666267721836@prevalent>
-X-Mailer: silicic leafy 
-Content-Type: text/html;
-  charset=us-ascii
-Content-Transfer-Encoding: 7bit
-
-<html>
-
-
-
-<body>
-
-<p><br>
-</p>
-
-<p align="center"><a href="http://www.cFZ.phrnw.com/tp/indx.asp?ID=w">&nbsp;</p>
-
-<p align="center"><img src="http://www.zP6.qwmeds.com/wlt.gif" border="0"></a></p>
-<p><br>
-<br>
-<br><br><br><br>
-<br><br><br><br>
-
-To say adios muchachos head on over to go to: pharmnw.com/host/emlremve.asp<br>
-
-
-<br><br><br><br>
-broach glutamine gurkha disciplinarian brawl atypic ridicule dandy hereof difficulty yourself satellite courtney alicia elude mcleod consist dunedin charlotte shoe bequest aluminate handlebar nebular bent booty  shutout concision algonquin more connector tuple barge downriver denebola urgent caleb gordon shield prima perhaps dar dreg weir ecuador edible broke compactify circuitry forsook fiske moscow tall influence alterman mountain such excuse railbird caw  
-
-</body>
-</html>
-
-
-<br><br>
-ghana managua ptolemaic ritter tina aden travel wang morn someone cocoon apparatus manchester crime daniel florin aile handicapped effort hairy poodle allegation doubloon basis fantasia windward chisel brink bibb fashion aspire farcical sorority eastward callahan cyrillic thoroughgoing awoke thyrotoxic adopt  dial simultaneous zeiss partisan elm commission eat ornately drumlin grandeur shields awaken meningitis aren't equipped intractable dwarf behest featherbrain 
-shell vacationland disseminate regurgitate decolonize jules methodology beverly drowse cried earl applied storeroom cattle revved kim sharp frizzle bevel continua hangable  rhodonite carcinogen bodybuild dusenbury acapulco pine stormbound ark suspension katz fabulous lend lilly matthews firewood groggy gallop 
-apocalypse break valois emporium flown cookbook jeff fanout nathaniel mollify royalty twirl whittle amethystine ladylike plywood terpsichorean analyses avocate basis hemingway aluminate gladiolus levin polymer arkansan diagnostician danielson augustus deplore rachmaninoff assyriology model alexander importune civic sprite concise haughty  wean peripatetic shove booky sonny book lyric presence cruz boisterous buttercup sidelong breed distributor 
-
-

mozilla/mstone/data/en-5k.msg

@@ -1,134 +0,0 @@
-From ladymrs@hotmail.com Wed Feb  4 15:18:52 2004
-Return-Path: <ladymrs@htmal.com>
-Received: from psszone01 ([220.85.210.40])
-	by seagrss.example.com (8.12.8/8.12.8) with SMTP id i1501w8m026266
-	for <exp@example.com>; Wed, 4 Feb 2004 19:01:59 -0500
-Message-Id: <200402050001.i1501w8m026266@seagrss.example.com>
-From: ladymore <ladymrs@htmal.com>
-To: exp@example.com
-Subject: =?euc-kr?q?(=B1=A4=B0=ED)=B9=CC=B1=B9=C1=F7=B9=E8=BC=DB...=B0=C7=B0=AD=BD=C4=C7=B0=B0=FA_=B4=D9=C0=CC=BE=EE=C6=AE_=C1=A6=C7=B0=B8=A6_=BC=D2=B0=B3=C7=D5=B4=CF=B4=D9._@?=
-Content-Transfer-Encoding: quoted-printable
-MIME-Version: 1.0
-Content-Type: multipart/related;
-  boundary="def67978-b4e7-4853-987a-b20e2bc5050e"
-Reply-To: ladymr <ladymrs@htmal.com>
-Date: Thu, 05 Feb 2004 08:18:52 +0900
-
-This is a multi-part message in MIME format
---def67978-b4e7-4853-987a-b20e2bc5050e
-Content-Type: text/html; charset=euc-kr
-Content-Transfer-Encoding: quoted-printable
-
-<HTML>
-<HEAD>
-<TITLE>spam_mail6</TITLE>
-<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; charset=3Deuc-kr">
-</HEAD>
-<BODY BGCOLOR=3D#FFFFFF LEFTMARGIN=3D0 TOPMARGIN=3D0 MARGINWIDTH=3D0 =
-MARGINHEIGHT=3D0>
-<TABLE WIDTH=3D595 BORDER=3D0 align=3D"center" CELLPADDING=3D0 CELLSPACING=3D=
-0>
-	<TR>
-		<TD COLSPAN=3D2>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_01.jpg" ALT=3D"" WIDTH=3D595 =
-HEIGHT=3D24 border=3D"0"></a></TD>
-	</TR>
-	<TR>
-		<TD COLSPAN=3D2>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_02.jpg" ALT=3D"" WIDTH=3D595 =
-HEIGHT=3D51 border=3D"0"></a></TD>
-	</TR>
-	<TR>
-		<TD COLSPAN=3D2>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_03.jpg" ALT=3D"" WIDTH=3D595 =
-HEIGHT=3D161 border=3D"0"></a></TD>
-	</TR>
-	<TR>
-		<TD>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_04.jpg" ALT=3D"" WIDTH=3D173 =
-HEIGHT=3D166 border=3D"0"></a></TD>
-		<TD>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_05.jpg" ALT=3D"" WIDTH=3D422 =
-HEIGHT=3D166 border=3D"0"></a></TD>
-	</TR>
-	<TR>
-		<TD>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_06.jpg" ALT=3D"" WIDTH=3D173 =
-HEIGHT=3D163 border=3D"0"></a></TD>
-		<TD>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_07.jpg" ALT=3D"" WIDTH=3D422 =
-HEIGHT=3D163 border=3D"0"></a></TD>
-	</TR>
-	<TR>
-		<TD>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_08.jpg" ALT=3D"" WIDTH=3D173 =
-HEIGHT=3D163 border=3D"0"></a></TD>
-		<TD>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_09.jpg" ALT=3D"" WIDTH=3D422 =
-HEIGHT=3D163 border=3D"0"></a></TD>
-	</TR>
-	<TR>
-		<TD>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_10.jpg" ALT=3D"" WIDTH=3D173 =
-HEIGHT=3D170 border=3D"0"></a></TD>
-		<TD>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_11.jpg" ALT=3D"" WIDTH=3D422 =
-HEIGHT=3D170 border=3D"0"></a></TD>
-	</TR>
-	<TR>
-		<TD>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_12.jpg" ALT=3D"" WIDTH=3D173 =
-HEIGHT=3D170 border=3D"0"></a></TD>
-		<TD>
-			<a href=3D"http://www.ldymr.com" target=3D"_blank"><IMG SRC=3D=
-"http://www.ldymr.com/ad_mail07/imgs/mail7_13.jpg" ALT=3D"" WIDTH=3D422 =
-HEIGHT=3D170 border=3D"0"></a></TD>
-	</TR>
-	<TR>
-		<TD COLSPAN=3D2>
-			<IMG SRC=3D"http://www.ldymr.com/ad_mail07/imgs/mail7_14.jpg" WIDTH=3D=
-595 HEIGHT=3D114 ALT=3D""></TD>
-	</TR>
-	<TR>
-		<TD COLSPAN=3D2>
-			<IMG SRC=3D"http://www.ldymr.com/ad_mail07/imgs/mail7_15.jpg" WIDTH=3D=
-595 HEIGHT=3D113 ALT=3D""></TD>
-	</TR>
-	<TR>
-		<TD COLSPAN=3D2>
-			<IMG SRC=3D"http://www.ldymr.com/ad_mail07/imgs/mail7_16.jpg" WIDTH=3D=
-595 HEIGHT=3D115 ALT=3D""></TD>
-	</TR>
-</TABLE>
-<table border=3D0 cellpadding=3D0 cellspacing=3D0 width=3D595 align=3D=
-"center" style=3D"font-size: 9pt; line-height: 150%">
-	<tr>
-		<td>=B1=CD=C7=CF=C0=C7 =C0=CC=B8=DE=C0=CF=C1=D6=BC=D2=B4=C2 =C0=CE=C5=CD=B3=
-=DD=BC=AD=C7=CE=C1=DF=BE=CB=B0=D4=B5=C7=BE=FA=C0=B8=B8=E7, =B8=DE=C0=CF=C1=D6=
-=BC=D2=C0=CC=BF=DC=C0=C7 =BE=EE=B6=B0=C7=D1 =C1=A4=BA=B8=B5=B5 =B0=A1=C1=F6=B0=
-=ED =C0=D6=C1=F6 =BE=CA=BD=C0=B4=CF=B4=D9.<br> =B8=DE=C0=CF=BC=F6=BD=C5=C0=BB =
-=BF=F8=C7=CF=C1=F6 =BE=CA=C0=BB=B0=E6=BF=EC <a href=3D=
-"mailto:ldymr@nvr.com">[=BC=F6=BD=C5=B0=C5=BA=CE]</a>=B8=A6 =B4=AD=B7=AF=
-=C1=D6=BD=CA=BD=C3=BF=E4.. =B0=A8=BB=E7 =C7=D5=B4=CF=B4=D9. If you feel that =
-this information is not what you want, please click [HERE] requesting to be =
-removed. Thank you, and we apologize for any inconvenience.</td>
-	</tr>
-	<tr><td>&nbsp;</td></tr>
-</table>
-</BODY>
-</HTML>
---def67978-b4e7-4853-987a-b20e2bc5050e--
-
-

mozilla/mstone/data/en-750.msg

@@ -1,32 +0,0 @@
-From tiffany21action@hotmail.com Mon Feb 23 06:25:12 2004
-Return-Path: <mmimcha@hotmail.com>
-Received: from e.com (ns.lefco.co.jp [210.162.221.66])
-	by leggite.e.com (8.12.8/8.12.8) with SMTP id i1NETCVg022171
-	for <en1k@example.com>; Mon, 23 Feb 2004 06:29:12 -0800
-To: <en1k@example.com>
-From: "jesph" <tffn21ctn@htmal.com>
-Date: Mon, 23 Feb 2004 14:25:12 GMT
-Message-Id: <1077546312-23378@excite.com>
-Sender: krn1crrll@htmal.com
-Subject: Super Cheap V-!-A-G-R-A!!
-Content-Type: text/plain;
-Status: RO
-
-Starting at $2.50 a dose!!
-
-http://prescrbdmds.com/gv/indx.php?pid=eph9106
-
-Isn't $2.50 worth it for you and your lady?!
-
-
-
-
-
-
-
-
-rufus bobcatelliot jared amanda1 nautica sarah1 japan 
-metallic metallicgray chance wolfMan
-oranges young philip 
-
-

mozilla/mstone/data/en-gif-17k.msg

@@ -1,239 +0,0 @@
-From ycruhaztbxo@yh.com Mon Aug 30 20:22:16 2004
-Return-Path: <ycruhaztbx@yh.com>
-Received: from localhost (localhost [127.0.0.1])
-	by smtp.example.com (8.12.11/8.12.5) with ESMTP id i7V4RAvY010450
-	for <exp@localhost>; Mon, 30 Aug 2004 21:27:10 -0700
-Received: from snacker.example.com [207.111.254.120]
-	by localhost with IMAP (fetchmail-6.2.5)
-	for exp@localhost (single-drop); Mon, 30 Aug 2004 21:27:10 -0700 (PDT)
-Received: from leggte.example.com ([207.111.254.118]) by snacker.example.com
-          (Netscape Messaging Server 4.15) with ESMTP id I3AH9K00.F2I for
-          <exp@example.com>; Mon, 30 Aug 2004 19:22:32 -0700 
-Received: from 207.111.254.118 ([211.53.120.209])
-	by leggte.example.com (8.12.8/8.12.8) with SMTP id i7V2THZe005873
-	for <exp@example.com>; Mon, 30 Aug 2004 19:29:20 -0700
-Message-Id: <200408310229.i7V2THZe005873@leggte.example.com>
-X-Mozilla-Status: 0001
-X-Mozilla-Status2: 00000000
-FCC: mailbox://ycruhaztbx@yh.com/Sent
-X-Identity-Key: id1
-Date: Mon, 30 Aug 2004 23:22:16 -0400
-From: Kimberly Murdock <ycruhaztbx@yh.com>
-X-Mozilla-Draft-Info: internal/draft; vcard=0; receipt=0; uuencode=0
-User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.4) Gecko/20030624 Netscape/7.1 (ax)
-X-Accept-Language: en-us, en
-MIME-Version: 1.0
-To: exp@example.com
-Subject: re[15]
-Content-Type: multipart/related;
-  boundary="------------040805020002040802060003"
-
-This is a multi-part message in MIME format.
---------------040805020002040802060003
-Content-Type: text/html; charset=us-ascii
-Content-Transfer-Encoding: 7bit
-
-<html><head><meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"></head><body bgcolor="#FFFFFE" text="#1BDDE2"><p><IMG SRC="cid:part1.04080303.03020805@vmcva@html.com" border="0" ALT=""></p><p><font color="#FFFFF0">aren't you? Jessica Alba Nostradamus in 1851</font></p><p><font color="#FFFFF7">Stephen King Easter</font></p></body></html>
-
---------------040805020002040802060003
-Content-Type: image/gif;
- name="radon.GIF"
-Content-Transfer-Encoding: base64
-Content-ID: <part1.04080303.03020805@vmcva@html.com>
-Content-Disposition: inline;
- filename="radon.GIF"
-
-R0lGODlh4wGPAfY9AAABAICAAMDAwMDcwKbK8EAgAGAgAKAgAABAACBAAGBAAIBAAKBAAMBAACBgAGBg
-AIBgAMBgAOBgAOCAACCgAMCgAMDAAAAgQCAgQEAgQKAgQMAgQCBAQEBAQGBAQIBAQKBAQMBAQOBAQEBg
-QGBgQIBgQKBgQMBgQOBgQCCAQECAQGCAQKCAQMCAQOCAQACgQCCgQECgQGCgQICgQKCgQMCgQOCgQEDA
-QGDAQIDAQODAQCBAgEBAgGBggGCAgICAgKCAgMCAgOCAgGCggICggKCggMCggOCggEDAgGDAgIDAgKDA
-gMDAgODAgIDggKDggMDggODggGBgwECAwGCAwGCgwICgwKCgwMCgwOCgwGDAwIDAwKDAwP/78KCgpP8A
-AP//AAAA/////wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
-AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAQAAAAALAAAAADbAYoBAAf/gGKC
-g4SFhoeIiYqLjI2Oj5CRkpOUlZaXmJmam5ydnp+goaKjpKWmp6ipqqusiF9fna+trq+whLW2s7q7vL2+
-prjBwpy4sbm7smK1gsnLlcm/0dLT1KXQhdea2dWUx823x5Lb3OTl5ueD48ye6uiK4+2T8e709fbW4bfs
-+feH8PzPAPYbSLCgPIGf5g38RwyhwYcQIyrj5zCgRHD+KkJSeLGjx3LwwDmbmC2YoWYjSXpbFg7lyGLp
-YDYyKRKmsJUpJzK7xvGjz5+9tglteTJXyZVF02HcCS0nUaaMeOZjiC2mrWFSgWrdKu1mzp1KseFcClZs
-2LIxya47i5ZWUrVp//WpbaeRq927oYZmhDW171y/bVsilatT5Lu9cAMLNiqwLt7HkC+FRPz23WCyX+Nq
-xnkzkbqslVUOa1s1sunTmyZnXL0I9N+vR9n21GyWNu15dFHr3n0wEuyKrm2rrB1XsG+AwW87zM27uXPP
-CJ/GPvk3tGHhsoxTd8uatGJ/wtk+H++crjer15Unbkq8MMbF2ymXDi91anjy+MkzX2s7pXbvTV3mXmIk
-EcYdXFShJ5tj+TUI2T+MWdcZgowV81J7901oWYRi9bWYTANi6OCIQHk1IYg0MfVhfVcZBZVVTjWWGS2/
-0aThcDAmSOKOPPbo449ABinkkEQWaeSRSCap5P+STDbp5JNQRinllFRWaeWVWGap5ZZcdunll2BeEsaY
-ZI7JShiVoCmGmj+xKYqb0piZCpxhQkInJXc2kmcke6LSJyd/ahJoK24OKmideB46iaGLMPqmKY6mWU2h
-p0SKqCB/ljkImmRi2qmncoKqpqZwfnpIp6MSoqmqoYJaCKWYrinnqque2uqasubJaau7bmoqrr/miqsh
-u5YaKqyxEhusqaTWOmyyuVJ67K2WXtonrMdC++yw2G6qqrfE+gotsmyWC6625Zr7LLLfoqvuq+/y2q6s
-56Zra73gsksnufjmOy+388qL7qWS7FnqwOu+qm2/256qcMLhRswwxMm+i8j/wQg/7O+547aLscYAexxr
-qhL/G3LHwFasMbsUE+xImcG6ui3J8NIcMMcOi7zwzg1b7DPKiXzM8sI2s/pzzzmrrDOnPN+JMb8pNyxs
-xkC7rKcin9qs9ay+Zlt10kqLijPRHB9daMxIU41z0VmXTXbJo8Kcqrm6Mvswv3R3XbXcFlvdaNB365x2
-4F+XfDLhILds9sWGH5241isL3rTk3+b9d9p4e8u224z7fXXnG4f9seB9N87z4WtzPvPp+0Y+NuYmL24y
-wk8nHOjmq4+s+du5T+w54KDTm7vPkCv+ur3GA+2416LPnnzT8f7LPMW3Zuw46zfvHXvZfZf+++UXo0r7
-/6zii+2qsQabuTW17O+rPudZoy2z6pUL3DXTVJcP8tmjS31/zdLjWgDft7Nlfe+ACEygAhdYJ7458IEQ
-jKAEJ0jBClrwghjMoAY3yMEOevCDzmKgCEdIwhKa8IQoTKEKV8jCFrrwhTCMoQxnSMMa2vCGOMyhDnfI
-wx768IdADKIQh0jEIhrxiEhMohKXyMQmOvGJUIyiFKdIxSQyaBEASEQWxbDFVACgi4UAoyDEyMUyRoKM
-nUDjFr/Ixi8ioo1snIQbM4HGS9TxEW08xBzdeEc86nGMcKxjIPuoRUL6MY3iOIoiATLHMBoyFF0koxiz
-OElKPNKOYRyEJP+YSUhcsv8Vn+TkGDtpxk1UcpSkJMQmPUmOUIomRxXKTCNV6UpORFKUZQRjLTVZilvy
-0hCrTCUjdokKYpbyl6g8piZ8mUxVAhOXw2zlRviik6w44yuUzOQaHXnLRsaRlrPkojcHmcps/lKX4pwk
-H8GJzGOu8ZtvbKcan0lPSkZynPjkpi7hqU50whOQs7xjHwUJUDgq85/pVAQzldnMhqLSnprE5z37uU9v
-clOb4cyjQy2jjOokJ5fabKYvA4pMdCaTmfM86TlpWdKIttSdzjRpPE8pTIaakaQqfSlMdyrTe+q0lAJV
-aDxzulOgtvOZNHVmTW/aU3n+dJsrfSpKlRpKFCHlo1D/vSlRldrQrHL1oUcl6ki/6lWtUnWUUA1lMMPK
-0IWecqFmXSpcvVpWuH6Vnnid6kaTitewppSrMgVrV/cqSpqa9K3HYRFKEpPVtLI1sHG9a2OHOlaRnvWy
-UTVnWYVKUYRG1KBOxSxi+/rTyErSovr0rE2NKlZoBrWz4fysRi0r2k7+FbCkhGxCV7uhWC5WON2Mqk0h
-O9G5bjWmIaWtYIUL1uAWVKjKxSJ0BwvUQMoWnHpl7kSPe9elsva7arRuYbs71PIe9KTiTWdFs7vV7Ub2
-ERa6qoBUWtnhSpaTo12tOXnpVswut7n8hSZu2SpgstqWwHI9Ll2py9uBlje7t52u/27N29f8PjKlxqVt
-fq9rFr54+D3zNWp9b8vX/8aVoJXsL3Pfu03netewjnDwUSdLXgzPWMO51aJ0y6nTCPsYwd6N7okTXM8b
-49i/UaFmduTbonwEdsEmZi+EEUxiA6P3qTl+LH5jPN3W9ti/UP6uae3KSiOLecqkNbGO1/zlNv83zE8W
-6WZbI5PRiIYfcT4oatmJ3YuWNLb2Da2c97tbM6u3wGjlMps/K9mM/nO2/bTyocnsSc+yt9AARTRIGyFj
-PnfV0QHlp58Fncc50/lDHbpiFVctHla7uhqDjLWsZ03rWpPz1bjOta53zete+/rXDFR1fgxJSGMWErQb
-/YSx3/+YXj0225aeuDWbKQ1rYAJ6mhRBdU1OQ2hNJ9sSwVRrJZYdzS5/mxvELq2iy2xHGHcDRAWCpbwj
-0+00B3ncWz6kHEdRbG9TI93c5bQkyE3oEs9EybFUUDVdQu/hrpPR/I2tas3dXFBzGNOHjnikNS7wHR84
-nzHd454zHXGIU3y87eWwRiH63IxjmuUHNjR8qQli9Xx0KxkWZ49VzNsCv9PNTVXunlFKbSATVudSdemb
-/zzgRU8byzxlaWiDjvQuGzzJJfFOWm6uFZ5HmbpXF7CKLRzzCoP93hfO632jS2PtBvmSaFZzUc8r5vea
-N+ynzjZ3uA4Ur7P47ORlNrKjXlv/JE+97Oe+cLOJK+ghg/nt65by0ZP9zQynXebYBkyHvoMXaW/47+qd
-uLcPW3bDPhrJdT25veWZ3jwXt/LYFT3c3VzdkW+87XI3e6OlnWoRvSTEXc/yilPfc5cDmfSF1/KRh696
-tAd+7riXdLmnL/kiN97xK777vaHT0ekofECziYi7mU93vDuf/DlvOujDPvtFj5/w5V/76lF+5nwLOfqm
-5vHzOfrh6mw+3nbxVz4lVjwnbu5He9VXVER3fOvmWo2HfF6mbkbXdAsIf9AHZxNId8XXW5rnFSoSfhBB
-Yg9HcmglcdfmdPpHgoWGULN1gf50gpPHgKPGdp+mW6IXaMJX/1G1514UxVTudW5+BYMHp3cf+HsgaETL
-Rm7noIR4IWy+loQ4B2ypZWtUWIUfwYRSmIVauIVc2IVe+IVgmAlOWA5BRYZAOIVYaA5lGGEXp4JuuH9Y
-dGvEBHD2F3gtiHF4mIFFQYQw0nu+AGhC2Au7tFY/AYjpp34F6Gz4RmH6VkiKyGDCV397VUsp8iJFOG+8
-YIhquG/zJxGaKIHxh3rJxYn+hoLW9ogBF4rkF2DT1H0J9yIswXCZeF7rNWowd3qVZ3EXVVeqRVC59IMX
-Z0/vFGY7aGa4uEkppn7Q9XkQyIhU1mdtKIwzNYp1t2bMaHh01lE19x1850W0SGrnRHXjhP+ASpdndghI
-iEhVA7hpy7d+TPdHyYhcinaN2Qd5D/Z46EhY8ciKHUePuQcdWece1gR8q0BjxFdl+Ph1qlhivsh4qkh4
-msVg9fWPBtmJkQh61WiPdWh3QrZcm/VJlpeDiZQgA0kgBZlTpzVnDul6iMeRlkZZ8gdxLLlpKflSn1d4
-++hx9DhhoWeCyFaT+lVjKEmNEtaSxDhzesGNBKkKLsaDMbhhhyVeULlHq0dXrUeV0JdoWrlb/iRbsHeP
-iehxD8mOQFiGhYWVxjdhTamMuHSN5geQ/1GS98GU/HiQbYl4zbh2hxiUc6eXVrZfEWlglGaWgMmWwuSW
-vDd/a0hkfUn/X+Boboj5bHcIFv23GfJlknS5lXape26HfqVXUwLolwmpVc6VVIWJjY6pYCjoj3Boltan
-fI0pYqXlmoAHm46QHSESIE0WbzOSme04dBL5gFCHdG5FiH0pZcSYc/t0mKCYlTh4jkLnjA2Ilxhom3kZ
-g+lIeSOZlJfYnbNIanGkgw51eg/ok2M2gl6ZUdbWg8lpaKUGmjh1l/xIWrxnaSdoTIQZntEolE5Fm/Vp
-ntJ5at2hIn4Yhkg0hgaaoIJYhQzaoA76oIGooBI6oRRaoRZ6oRiqJQh6JYvJlL7YXfU2faCAYc+WnoPI
-hGlIeSwIoNAYEJzBIlryiSc5nkQ5h6Tw/37YuYHbtwuhOZxUdxBGGKRHeCQy6ptVxpMdx2/XR6MWuaO6
-QIibuYrH4YoAIotW0m2BaXK3CGob15PqOZ8LtqIFZ3vqCIN+x6Qf94OQxqUt2qW/2IMTGKXa2Rtj0R5D
-WiRYalrhSIF8GnBotpwEaJOCuX95mmYk2qcRqKcKqHSSuIFyypfbWRMBgplPUpEZuZIOeKltNpOeSZNn
-CKL2Fm6iOZaTB5XBWZSi2KS9BUstQqlOYqlkhqn0mYqW6pw7qZX5h1RoKHgtKKukioOmaos6aZSlmHdo
-EYuu2iRrqanGKGrJV6ON6o5n1ZQ3eKYBepzo9ZOP5qwP6ZSJN6poGv97k9mHSdGNr1qXfhqTnRqU+8ip
-ClmYbDicYsmZHpmkz6qoOKquxKeH3Pdhcql1UbKssaqu70pgeep1j9pi82mwF2mK14d/PqeaFpiRbUWs
-/NqvC7eb13SnROKuEwleiEptCBmd+RitJnt07UdhCTh2CcmyjBqvjYqkiaWbQrqhQuKuK7ie+jSDwGid
-0qefJgeJ4/pa0wmfxMWmwcizgAW0bbV4LOqllhAji5ShB0q1VvuqEJq1Wnu1XNu1Xvu1YBu2YsskNjse
-dHitcTh4KYq24DaZg2evaIufBVmi4HZGbjuu2FagBDpsxddvlqR2jchuiCR9OrqVcbuI3uikRQv/mQSL
-lDT7uGV7hX07r4Jbjw4roqa0kZ9Klv4mt74Jh4F7cipJpwsHYrtJHiHKtC+HhxNnY2IajEj7pkore5SL
-aKmLnscIlGqXi3DKaOL5lD4ZaftalqlBc0qZrJChnBAWlkQGnCn3vM5bXQxbu4xpejv3mLm1jswbvT3q
-nNKrgWfIhFa1jQCLGn6XsJCIpnkJsc+JvqpKu4BbmwULqjQ4lo9ad+5rg5wWocY6b+bacPcnvxhpon/5
-mdi4vum7uSRYnw8rwMP7vOOJlu+6eEZ7qhWLR/xLI77VqnNpGp5nsW9Vop0mrRoIaalqcINotCZ8wrYl
-wsJJcgcplbu3po6F/6gXO2OxpsHgV5khshs4mr+Yq39kx58IDL43nMA/7MDh+8K3mqlzKqWpS4qt6K+X
-2cEAPJtKbMQ9V8R7ia8WG6rYCaVG1sR+xcQg/MX2K7SQesCku2Sma4m80b3cy7yEGrI2XJ3fu8UpuMTx
-O8fYm51vVoEgm4LF+Y6Gy5yY57gbjInNIYJj+oK6e36D5mliirAkdYMFlZIR6sjudMlPC8jFqIO/275s
-Ksrb97ahJxlTu22utrY+/Auu3A1hGMudB7qJi0Jam8sZ/G9EisleRMtjG8zCPMzEXMzFHLkJ1KG/vL8m
-6FIEh190C7UDh6LRxqsz+IZ4K6CSysojVKS3PP/C5rhMDcuGrgTMdER/MWuYebfBTdab3+PNxfSMkbi2
-1mqchavArCDGaazF/FcYk7qxyIwlB1uDJeeGd8hPicmu4am6GFetS3rBaaqlCN27Luem0tiijprFqrp1
-BPK/VjPQi1p1gxyBgwmTPtqcnEvO0HzHUNeMgkzHJi2ltkyulDmpVuw3sOqzbHyv0yuOTix2YDzPBlyP
-3bt0JTysqaq43HwiS/k7Of2ULVmbH4qXEsh+eobKmRyfCxnVwErVwoqqMo3P5ArQO9zN6MqsEsmt9Wq7
-JOtwWH2y1+qrnret0WvUXCmDGn3EffivPYxAAqvTyjfEVdnWMBu/hQvOQy3/uhJbxA2GyHwlSKqFm268
-dU3tOX8N1USc2KCJvT82q5uL2Pcar+zL2FOd18Qk2RycsXCsQB67ituL0uH82jnKkaMnkuRogdUHqM8J
-yDKLdZDLyAuEs2pt0K/7ZwLFgspY3JCXsmKn1Q1N13Ol1cVVjf8ZyQmNdXqLI8ZcQwG93d7Nbboc3lT4
-3eRd3uZ93uid3uq93uzd3u793vAd3/I93/Rd3/Z93/id3/q93/zd3/793wAe4AI+4ARe4AZ+4Aie4MSg
-4AbRBQ7eBVzhzvDlot19Cu1sDxX+f/wh4SOJHxDOCB++CA5+DpXYG++W4dbwfeiA4t9XIcbA4gQx4pTw
-/+A0XuM2fuOtcCN5e+IY7uL0wLHvNgocTiI3/uADQONi8OCCUOQyrgomEql7HRs14mGnmyMECtBLhhw1
-WyBSG+Va/uRknWrtPLWrjB5UfuZ2pt3x5eJVPiJM/uACIABYYARBAARAYARZoOSKYORHzgomMhtU3nu/
-p93btubH6hKBDoBafugJN+g029e/NRxubNO8+RnIWhY2LYtGWByNPtlWSh5FPgBxngV0DgQf8AEgkOqq
-ruonIARHkOdJnuQOLuoC0AV93uSp8OdDnugKEuaZ4euaHuw+nm2nu+mVnugbu4ewiOjILuw0AhXAfhXL
-PuzOzuXfwB+6EepxHudGAP8EJmACp47qIKAB4q4BGnAA6M4AIBACJ3ACQWAETTAA8i7vs27rJPADs+7n
-f36bLV7tv+7vAM/mz37svc7sn67sBM+q077aBd/sF97wEJ/wsRiQPhHihADhNy7vS7AEXkAEHk8EQNAC
-LeACJxACJt8ADRACqc4A6g4CJuDu724Eom7rXCAG8r7tXvADXtADHQAAHZDvq/DkEw7H0c7wEr9IxQ6j
-lBHmR+8hG8Lo6bGHBw/xTF9nVlr0TX8eWhHqA8AFSkAEQzAEMhADZB8DKlD2MiADM1AERnAELoAC7d7u
-LtD22z7iD/4DPTACGNADP/ADHdABJNABGPD3f/8Dsq7/7yU+hCmC9f+e9Gxe7XuL8FUP+Sq+F3Vq9BNv
-9ATP9Dgy+Y6/8JH/ETU+7wOwBESABGWf+jFwA6zP+qqfBErwBPO+7XF+5BZfCF1AAm3E84F/7/fuBbV/
-+EEPb/yeHowPIaB//P8h+VdP+ZrfakQ/FJ+/9FkOi8mvm9evsaAPEbPe9UqQBKp/AzKAAzgw9jEw/klA
-/jgA+7FP+raP8bevCANAAoPP917gBbTe54Wg/07OsdoGCF+CYmKCX4SFh4aDiISGjoyPiYqSlYyIl42Y
-h4mbipOQnKCFoZqai4uljZWlqaCinpSbkLOdo4+UopG6u7K2kqbBwsPExcbFXV1E/0QyMjcxNzjS0jHT
-OElKT1wDA8neycfBXY0CAt3giOiN6uHtxrDuk7yoqa6dmbG5+q30g/aOxf69qgfMFaph/fqdAjawVzBc
-8P7lCuXwIMV88iaqisexo0cxXX6oUIHjxrMYMnAoweZk27lv3z4iO9alm8ybOHPqlAlv586EPokxDEq0
-qFGP37isUEGEGzdvIKFGnTk13ThxhK6GS2bzqNevX3GB5flw7CizaNPmBKdVTLmXIDW1VYtsLt27eFcN
-zYvQVM+je/kKFiw1K7vBNLsiXmwWH+OFAr1afEzZbOGodivLVay5s+fPoEMvPnw4dM3MolOrXs26NTHS
-qD2fdv9Nu7bt25Rhs56Nu7fv38B31pQb2zPn4MiTK1c+fF1xzbyXS59OvXVzq6u5Pq/Ovbt3tZfjdoSJ
-LIrWuVdRXyVA4On39/Djgw2/vd04bwOaNDlyxMURw+LJZdg37LEXnXwIJqhgPPSt1UUW+vHnggsoSIAC
-CkekJ14XBXbooYc1DbDgiCSWSJyAW8H0DYRH2DAhhReiMGET933YISI2FiiGeyb26CN8pKWYn35NnDMA
-hETydwSRM46TI3s4Pjngj1RWOV2QxnhDZJEqdplMkzd2uMWTHhJyjpVopukblq/h91J9Xcw4wIdbbKFF
-nTniqSOPavbpp2oHwhnTMJd10d//ESKSSYBW7G1BRRUEjEnAjsf9aemljB0YIKGcoZOeVN4cep8YBUqa
-lYdbVFHFmFosqh2msMZK2HHPJUMjOQJsZygKNtSoqJ2RVnGnjoPKauyx87EpTBdR3ErODz94kesAXkAr
-LThNuNArSI1KemeddWohrqrgjulSpcimq+5NDb6mnzrJCACEBwVggEEBAOSbAAkCiJHtthxGKmmkAotL
-gKqQEnBnFVS4VN+6EEe8LHrIvPtpTQI0YUQHBbjAQgEjrABAD/7652u5dXLBBcGprgruwVQsiq7ENNd8
-4joVOxsiVxoDUIINJiSwhBIIePGgf+Z1IYDKTHNRjgB4WvFo/6StpmoFezPbrLXEyorDY01eGFFOFkAU
-AIQLH3TwhAwAXCFGFtrSmEU5XtRtxN38cVEnucAenHB7D28teKzXZZUlvAR40UMPJeBrgAEAXKCCAxyM
-A7cNROJ9txEt2OC53lqQO2wVUwyc9eCoy3paW5mxBVdUS/9AAgccTLFDAhAoMPJ9E9rAn4svvuj53o8m
-LPXVHZaW+vKwrk7egF4a1k17P1wQsxQPgFEBAD9403vw4GtrAxdWIOxyFchjfSbz7BPu1FNehugUW+bM
-yV4PGFhhBQ8BgGFBAf36krbCJzzPVUtVPhhT+QYGkvW174GW4sYTlvC+CloQLvKqlhV+0P8BDHRgBwAI
-gA4ekIH09Ad4wfOcCl1QBC/ozwvsgSF7DEapwOnkLxDMoWoGIAAlKGEJFOTh+562NCGqQwA9GAEGAGCv
-ewGgAAUgWVb6MyEZpXCFYruCtARwhVwFq1UNtGFOAvMOevjFMQHJBA6FERlMeIIuB5lMOMiow6Pw0Ic+
-BCIQuaFHPQ6pSIYDyVu+0QMAeCEdR7DihcCnQhsYwQtcuIIWvZAoHdVQLXJsBxnpyEY1xoOO88CkPwjy
-STTW8ShKw6Mqf9jHPjJhPzoL5IYoabhEVpGAvnMkJCcpIta153RFUYg7OIkTUyLElMZszCWIecw1nnIt
-6xDANPCIgxz/rBKPS2CCizK0LAAByJYUwmWLHlk3o63DQ8AkSkKcCZmHQGSUnLAEPAviGHieESgEiSc+
-iGmPOEpkme88yzO/UhMlpEQlSpAGHq2Zg4b+0EXbwgyhtHSEFkwoAotkpA2C4AUiSIs46UlnUNaZzDe6
-U5/zvIVDZqHGfdzTpPnUyD3WuAuTCnSUsZgpOweqk4JaoxnSSII0TPIMGeTABjJSz326wCQXnOCpFApB
-CGIkIxS04KochaQDNyPGYpK0pJtcqTxVQU+NjPWlZBVrRdB41rK+sa3x5OlYfDoNoMYgBjDIKwzuWk2k
-ugA9tvrdiyokAamGQAQikGpin8rYE1xV/1oieo1IffLVY4QVpWnF7FmEedZ2ZvazGWGrWkNJkc66Ua4E
-HUBCg2oNGKRgr3d9xlEn9I0IadSphpXqBna7gdyC4LcgMMFTjRBZyXb1JuvUJDJHC1q3ejYwzoWrZpsJ
-2s3Ws56oTe1qrUGNu0LDuziowYQkRED/7Ae3IeDtBjTAXg0A973CPUG/cGYKTYFFmMqNSHOZa92emNam
-0q1uJzXrXIFuJLto6YJBD2oN7+p1rzIQ72DBVwP+CIBzKEhsCH7bXva+F7gfAMEJ/pqY4/KkjWXUr0oJ
-zF8Dr/ikMOUvP1tcYJseGMFB6cITflqSZzw4ryiR8ItaUAMjMIEJff/E8Al+G2LguvfDv2UACC6UBRRx
-VZQ7pW4tAvziV5CVpZERC5ej20labIQhrDAwM3GMlB3XFRo4+DEMnhFeq9Igm3r0YRKSMIQh/KAFJzDB
-AqDMYUJP9QRNsLImtnrfj1SWpPIIrWkFgtMBS/qdLo10M+cxT1gY5J9ZZjNHasLdaODAuw4GMkpk0OdW
-e3ckzTCCEJZM6A+717AXSvQxGC3qXienJkKdhqlPglcYUOAFqkZ1sVMwEhWgRD9C8G2tQWBYEeS6Prz2
-tbbXpFpho+TUDy62nH98V1ZLQz8ukCoKcivV3+aWqhJwVjGyve1614auPU6JuO/64Nfm9QYMNvX/qXFg
-hP7ESMNTjRGMqIoCRGNbefaO+G66zWNxy5mv1bQGsWWgBCNU8QQMh7cELDTeI2ThYfaVuMpTU5MlcDcl
-PsY4dzXuXWw4JVsEjJGFZLSk8GRpsisP+mgG4PKZc3fPDcVBM77N8Se8jqktetEEwumfnvt8K0AXutbz
-kownBDsaQJ15bK+hBChkLQtR753VJ+qOlG/97Yj5BtGHYJKhelcG2NiGrpKxJB6a+Od/h7vgiwKqAey4
-3NmAH8Tr+zykyOUHuQrjZwZAgcrHQAmBH/zyCqe0+S3eMv2qFrVk18us00UJlU89BWRQXM0jGDaZz0kv
-exCtaGHAaNGSvHFU/696zLv+9a3fFF2u4oUOQEsAXgBArjDwAzHUTfeeWQLvUx+D2P+ea52KPetYJ0sB
-/KAHRkOiGDpAgh1hoF/kHwDkob/76VMgBteXa6BaR6g2raOXoSdBB8j/A26AhAQk0wWG5H3VEkBulxsy
-4H6sF3/PVCiAxSmtg3yRNQ7Uon4dIAAkkC/kxy8gAXm1533dIwakZybWZxYDkAQKGHwMyD7t0iZK833z
-JRf2kiscpH/c0wEAsH89sH/50j20Vw7rhx8/oHwkOHE+FAOqt4Ar2D4tKEtcgXzIVzfHgXz2Unw5mC9M
-tEQ5iESygwHdcHxZ8TT4g4PzZXqUMQBImHpKuP+EqeOAhqM0GBMt1QItPUACHOgWRuMFWniFRsNEOAiA
-3CMAHdQDIuJ9eIhEHvR99kKEO/J5ooGGSaiCbFgzboiHilM3yPd90oKD5Od9JLBE+GNIGZgvfUgCegh5
-dwgOVPh9HXSDHrR/HRBZ9MYakKiGkjiJEcMOzVEt1bI4uYKDpbiDhYQBo5iDIshEfnh+Ith8V/E0+qeH
-zDeE3GOHkMcWjViCiFGLlbeGuIh993cfuSIAS9Q9oCgA3FNI6DgAe7iD3FN8pvh/lCQtxUd+r5iDHUB7
-W9QN1GJOlwQc2rh6t9iNODFDYPQegSIXfyiOfqh8QziEJKCOAPCJzPdRmNH/kDu4RLAokRdYN/ECfnQT
-eez3G//IjQIpE10gLihJQ98xf5ogjWOYL144hIUUi+SnNLzIFV4AgDjYkLA4MrTnf24hh7liFweIGyMZ
-kCV5DCm5lJOyktmHkBqohzkYEiNDAt0DDjvIia34Ax6kfPbSATcJL4PEKdRxlEkZDwqzlCkJJF3TBYW0
-O8CIh4XRBR30iXXJfPfohVAofOnwc9xhlmdpDGmplgXJljeDCArZfBIoS41QSPySfBh4e0rDmKN2dcsB
-mIFpCoNJmNjoGl1DCG8RDhmYf6/yd3LHJ92BmYG5mWq5KAqii7E3gvDyjTTBFe9jmWWZhtuIlAzImq2C
-/5uGiR3sMip9GS8giJRuoniOWB2quYK+WZg9Ujh8SV9iFC+YOJSMZ5vK2XgJ0pyu55uuWSUHqWhtpzQE
-6HetIz9vEj8l4p1b95xNiSYs+REYUzfVqDzJGT/RYyLuqXLg2ZnUMZ8MQjfyGIPEUUH6qZ8/0p/aBp+X
-IqB1QS1RGJp9iRnyk6AxsZ8LqpsAGXH/2TywWX/1+ZG0cprbiaEKaiUMylMOaiwh6hzWWU7mRDGn4Xko
-KihqwqC8KTgfiiwvipjXeS0Tc5vsaZIAOh3emYDVxzXF0KLqApTelA4UClLquZ7LySARxKHcmICrBzEn
-CZ2N0KMQA6VVcTgX2iWohP8pgDkAxkYBSaAuXwqmTso1PwpSCKoicxUrZkl5lacEyDKYWxCmrXmkPtJ5
-zsF4d6qhOHaUfEoBS2Asg9mUc2oz98FBM/opiZqivjaSqFd5O1olkUoqg8o8GLODkKWeN3qlcvWPqvep
-PvKcKRmfLBiHPTCUqaqqCMaqnmopsPqbOnSazoOiKod6iMehqeeqIwKrsppDGXqrQed+7gcDhJocvRqr
-zHqrxaJyaGis7rekVmInhEmY14qt0wpBIcIFPiQDd2V55dob4RqugWqu5NqNuJqZoDGv9pqv93aj+tqv
-nimsBMWv/jqwWpNcP0FTOFRSWPYJFpFJoJZJZgYaCov/FmsmSl7lXxPraDXFGp50sMdUZosBULUQsSTb
-UiN7sp6RscpUGSorFH/Rsh2xsavRsXCUsp52svvkaTqLsmRRFtUBs40xRi8bahprG5GQF0BLscuEszu7
-ECObtO4UtT9LtGlBtR97RmFhtZRxtDnFD3rRaZzWEPY0EF+7F/00thCBVnqxtjwrsiU7VmWlDzqrEJjW
-UteFWXdrVm4Ftxi7tyj1tw2haZqWtqTQtZAxt3a7VhdhuGE2EYS7uLaAF5Mhs2LBtoW7sfr0tm+VuZG7
-ZbwQsZXrWfmAZhg7ulL7C5zLuU4Lup5rZte1uVgLEKjbuq0QuwDFsKmrC27EtZjr/w+2a7u5S7te1ruy
-y7Vsq7iz27lwFFeu+7ll5rykq7nNO72r67Zuq2XSS7Kgy07WO13Ku72fQLsy+7Sq+1bCS7kIu73H+7mV
-G73JC2NpRL3va7KoO7cgS7zvKxjGi74f67zWlb34+7qRy78++79MG7vfu7rze72Wew/rW1qlK79rC70U
-zLPn27QiG7pxO75qe7jBK7+Je7tfK7UBDLGSG8EM7LT+q1IArLptRMApfFrqi7L0q70IPL6WcLpq9sEg
-m782BsMrXL0rjMPly8IKbGlCDMIu3LQdbLYfzMGIIcAx3MC8G7xL7LrxO8BXfLoMnLNUzL0VfLmZGxHh
-q7z4W/+4lgvF0tu9FqzED3y+IGzDpyXFPEzArCvGxYvCT6y7CTwWZlS2hnvDmLa4vbAPdTu0ORtTZfFp
-8pTIiGtMIZxpCVzDpQXIhxtp0EXGjpxSi3y7iJvEkDu4l5WwDTu5/pS4jOvEkNbIbWwl+IUcUDtHCCwZ
-BPsjKhYcvjBSZdzKQovGtWwiJtwbFcsRqqy1+fXLyJzMyrzMzNzMzvzM0BzN0jzN1FzN1nzN2JzNOxEG
-3OwZ3awJ37wc3BwGxzDO2iwd5lzO5AzO61wU4YwI75wc6VwM83zOyFHPw4DP+LzN7QzP/awc+xwMAW3P
-vTHQ7PzPBn0T8SwGC33PDU3Q3pH/0P6M0A+NEwtd0b8h0RA9HRrN0PHc0Rxx0f8M0Bi90Rz9zeP8zilt
-zisdzumc0sKwzyId0ytNDC0t0CgN0xP90S1d0/Sc0w09zz3t0yYNGkMt1Dfd0xPt0US91OxsCiI91Dit
-1I3A0klN1YRw1Bqt1RTdzlw90kVdGUSt01nN013t0vo8009d1fUs0yrd1mR902Vd0h1N1kzdzxIN0mHN
-F3bN1Gzd1QcN2Mag1n8N1W890nBt1oJN02A91Yvt1/lc0nuNGG6N12Z90FM92Ij92IUN2Ybt1VH92TYt
-2XOd2aUd2Y092YxR2Z3t1K7d2pFt2Jht2gON1Jt926jdDgFt/9u5rdqfwdqv7dmnPduxvdaw3dlfjda4
-TdzMrdlgzdum7dveHNrBndbPTdebLdq0ndzBLdzDfdzOHd27TdrSzdfU/d3ePd6pXday3dxODdLADd56
-3d2eHd/l3Rn2bd3u7d3tzdbard3wfd7VTd77Dd30fd+Pkd+XDd787d/GzeCQ3dfDbd/fPd8MbuANjuAJ
-LuD6/dec3d/+zNj/zd+JPeITTuCf/dgYruGaoeCcPdYd7tEg7uE0vtM1jt4krtzqfNagfdgHzuKL4eLK
-reNY/d7ZjdpFPtdJTuER/tXHzdWzzd1ALhgUbtdxDdSN/dJHPtoS7uFBLeCnLeXoreVfvv/OYj7lwGHh
-aC7Nar7m0Nzmbu7McB7nzDzndK7Mdn7ner7nfN7nfv7ngK4WA4CuMfCoge7MBcWth57MBcWl0Oqni54p
-yWBJLCgDbdqtSUBBkX4Xk06Q4bqsy6Or1OdDZrjpMvGurVlHXACt03d5SlDqph4OqG6tp6RgvMetrU7q
-7frnAeMNhAnqOvSPS1BQSYDrt67rsc4u8Ipgq059rUfsxq56rg7rhx6n4opjtp56SaAeqlXsrD7qr77r
-vm3td2Ltm6qbhv5zKxHt4E7tLE7uW+AkKFlvzY6sm7Hu3255yN7n8L4e8x6Y0J7v77fvaN7vOIKS4m5v
-AZ/vl4eC0v6E6ntt8I2AksA+sAsv8M6+0RKvCQqT8Jp38d+e7tm88UXdBexOAdpM8pM9AI7Oe296zSpf
-3qqlSvb+yzGf7P168zifrzq/85nZ8z5/lkAf9N34nPFO9DwPrkt59Ehvr7Dq8U0vau9a8VGPi1Nf9Zlp
-9Fjv9EwJ9VvPZgXi9V8/9mRfG4EAACH+dHR0dHR0dHR0dHR0dHR0dHR0dHR0dHR0dHR0dHR0dHR0dHR0
-bGdsemJvd2xucnVhbndidXlpdWdxdmF0eGd1cmhqd3FueWpnZm5mZWZkADt=
-
---------------040805020002040802060003--
-
-

mozilla/mstone/data/gr-3k.msg

@@ -1,65 +0,0 @@
-From mri-srvce@fstmal.gr Mon Aug  2 08:53:44 2004
-Return-Path: <root@77qq.net>
-Received: from 77qq.net (S0106000f662071da.vc.shawcable.net [24.81.14.82])
-	by leggite.example.com (8.12.8/8.12.8) with ESMTP id i72Ft8gE010695
-	for <exp@example.com>; Mon, 2 Aug 2004 08:55:21 -0700
-Received: from 77qq.net (77qq.net [127.0.0.1])
-	by 77qq.net (8.12.10/8.12.10) with ESMTP id i72FrjjM013257
-	for <exp@example.com>; Mon, 2 Aug 2004 08:53:45 -0700
-Received: (from root@localhost)
-	by 77qq.net (8.12.10/8.12.10/Submit) id i72Frib7013231;
-	Mon, 2 Aug 2004 08:53:44 -0700
-Date: Mon, 2 Aug 2004 08:53:44 -0700
-Message-Id: <200408021553.i72Frib7013231@77qq.net>
-To: dcl@example.com
-Subject: =?ISO-2022-JP?B?TVJJGyRCRDQ6OiVsJV0hPCVIGyhCIHZvbC4zOBskQiEhKCFGQ0pMSEco?=
- =?ISO-2022-JP?B?IRsoQg==?=
-MIME-Version: 1.0
-From: mri-srvce@fstmal.gr
-Reply-To: mri-srvce@fstmal.gr
-Content-type: text/plain;
-  charset=JIS
-Content-Transfer-Encoding: 7bit
-
-
-$B(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(B 4,313,786$BItH/9T(B $B(,(B
-
-           MRI$BD4::%l%]!<%H(B vol.38$B!!(!FCJLHG(!(B
-
-$B(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(B
-$B"":#2s$N$b$/$8(B
-$B"#IW!"?M:J$G$"$k$3$H$rK:$l$?$$%*%H%J5^A}Cf!*(B
-$B!!!|%5%$%H2q0w$XEEOC<h:`!*!!40A4F?L>$G8l$i$l$?%*%H%J$N%[%s%M(B
-
-$B"#:G8e$K$O$d$C$Q$j!"%^%a$JCK$,%H%/$r$9$k(B
-$B!!!|=P2q$$%3%_%e%K%F%#%5%$%H4IM}?M$@$+$i$o$+$k!":#$N%[%s%H(B
-
-$B!&!&!#!&!,!z!&!#!&!&!#!&!,!z!&!#!&!&!#!&!,!z!&!#!&!#!&!,!z!&!#!&!&!#!&!,(B
-
-$B(.(,(,(,(,(B $BIW!"?M:J$G$"$k$3$H$rK:$l$?$$%*%H%J5^A}Cf!*(B $B(,(,(,(,(/(B
-$B!!!!!!!!!!!!!!!!!!!!(Bhttp://7qq.net/mrs/1/
-$B(1(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(0(B
-  $B%5%$%H4IM}<T$N6(NO$G!"F?L>$r>r7o$K8==w@-2q0w$X$NEEOC<h:`$N5v2D$rF@$F(B
-  $BD>@\<h:`$7$^$7$?!#$*$H$J$N=w@-$,<g:E$9$k=P2q$$%5%$%HN";v>p$D$-$G$9!#(B
-$B!!(B  $BFbMF$O%3%A%i(B-----------http://7qq.net/mrs/1/
-
-
-$B(.(,(,(,(,(,(B $B:G8e$K$O$d$C$Q$j!"%^%a$JCK$,%H%/$r$9$k(B $B(,(,(,(,(,(/(B
-$B!!!!!!!!!!!!!!!!!!!!(Bhttp://77qq.net/mrs/2/
-$B(1(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(0(B
-$B!!%5%$%H4IM}<T$H$N!"%a!<%k$G$N#Q!u#A$G8=:_$N=P2q$$%3%_%e%K%F%#>u67(B
-  $B96N,K!$J$I$rD4::$7$^$7$?!#<c<T$N=P2q$$;v>p$rLVMe$7$F$$$^$9!#(B
-$B!!!!FbMF$O%3%A%i(B-----------http://7qq.net/mrs/2/
-
-$B"#(B------------------------------------------------------------------$B"#(B
-$B!!!!;d$I$b!JM-!K=P2q$$D4::%7%9%F%`$G$O!"J@<RFH<+$N%3%M%/%7%g%s$d(B
-$B!!!!@:1T<h:`?X$K$h$kD>@\$N<h:`$K$h$C$F!"3'$5$^$K$*4+$a$G$-$k=P2q$$(B
-$B!!!!%3%_%e%K%F%#$N>R2p$r$7$F$*$j$^$9!#(B
-$B"#(B------------------------------------------------------------------$B"#(B
-$B!!!!J@<R$G$OK\%[!<%`%Z!<%8$N@.$jN)$A!"J@<R$N9M$(J}$K$4;?F1$$$?$@$1$k(B
-$B!!!!9-9p<gMM$rJg=8$$$?$7$F$*$j$^$9!#$*5$7Z$K$*Ld$$9g$o$;$/$@$5$$!#(B
-
-$B!!!!!!!!!!!JM-!K=P2q$$D4::%7%9%F%`!!(B
-
-
-

mozilla/mstone/data/nu-5k.msg

@@ -1,115 +0,0 @@
-From dlvry@hosy-r.mn.nu Mon Apr 12 00:25:51 2004
-Return-Path: <dlvry@hosy-r.mn.nu>
-Received: from leggite.example.com ([207.111.254.118]) by snacker.example.com
-          (Netscape Messaging Server 4.15) with ESMTP id HW1R7A00.G23 for
-          <exp@example.com>; Mon, 12 Apr 2004 00:23:34 -0700 
-Received: from hosyou-r.mine.nu (p1061-ipad402marunouchi.tokyo.ocn.ne.jp [222.146.113.61])
-	by leggite.example.com (8.12.8/8.12.8) with ESMTP id i3C7QYBl032246
-	for <exp@example.com>; Mon, 12 Apr 2004 00:26:34 -0700
-Received: from hosy-r.mn.nu (unknown [192.168.3.80])
-	by hosy-r.mn.nu (Postfix) with ESMTP id 2F2BA5540B7
-	for <exp@example.com>; Mon, 12 Apr 2004 16:25:51 +0900 (JST)
-Message-ID: <12845318.1081754751281.JavaMail.postgres@hosyou-r.mine.nu>
-Date: Mon, 12 Apr 2004 16:25:51 +0900 (JST)
-From: =?iso-2022-jp?Q?=1B=24B=22!3Z!9=25H=25/=25H=25/=25S=258=25M=1B=28B?= =?iso-2022-jp?Q?=1B=24B=259=3EpJs=24H=24*E75=24=3EpJs=3CR=1B=28B?= <delivery@hosyou-r.mine.nu>
-To: exp@example.com
-Subject: =?iso-2022-jp?Q?=1B$B!Z$*E75$%a%k%^%,![#52/#9=1B(B?=
- =?iso-2022-jp?Q?=1B$B@iK|1=5F>Z5r!&=3DPMh$k:=5FBp%S%8=1B(B?=
- =?iso-2022-jp?Q?=1B$B%M%9$HA49q$*E75$>pJs!!Bh=1B(B4?=
- =?iso-2022-jp?Q?10=1B$B9f!J=1B(B8,000=1B$BItG[=3F.=1B(B)?=
-Mime-Version: 1.0
-Content-Type: text/plain
-Content-Transfer-Encoding: 7bit
-
-exp@example.com$BMM!"(B
-   $B$*FI$_D:$-!"$"$j$,$H$&$4$6$$$^$9!#(B
-
-$B!~K\%a%k%^%,$NG[?.ITMW!"$^$?$OEPO?$7$?3P$($N$J$$>l9g$O(B
-$B!!0lHV2<$N!z!z!z!!:#F|$NE75$M=Js!!!z!z!z(B
-$B!!!!!!!!$H(,KhD+8+$l$k!*!!A49q$N$*E75$(,!!(B
-$B!!!!!!$N4V$K$"$k%"%I%l%9$G2r=|$5$;$FD:$-$^$9!#!!(B
-
-$B!!!!(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(B
-$B!!!!!~#52/#9@iK|1_>Z5rM-%S%8%M%9!*9b3[6b3[$O4X?4$,9b$$!~(B
-$B!!!!(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(B
-$B!y#5@iK|1_Cy6b$,M_$7$$!*(B
-$B!y#32/1_$N;v6H;q6b$,M_$7$$!*(B
-$B!yO78e$N$?$a$K#4@iK|1_M_$7$$(B
-$B!y0B?4$N0Y$KJ]>Z$,M_$7$$(B
-$B!y%M%C%H$G#7@iK|1_0J>e<}F~$,M_$7$$(B
-
-$B$=$s$J5.J}$K:GE,$J4JC1:_Bp%S%8%M%9$G$9!#(B
-$B4{$K#32/!"#52/#9@iK|1_$N<}F~<TB3=P$7$F$$$^$9!#(B
-$B$^$:$O!">Z5r$r8+$F$/$@$5$$!"$=$l$+$i$G$9!*(B
-$B!z>Z5r$OEl5~9b:[$K$FH=7h!z(B 
-$B"!9b3[<}F~$N>Z5r%"%j!*"!(B
-$B>\$7$/$O(BHP$B$K$F$43NG'$/$@$5$$!#(B
-
-$B!!(Bhttp://brk.at/hosy
-
-$B2?;v$bO@$h$j>Z5r!&:[H=41$NL\$G$*3N$+$a?d>)!*!*(B
-$B!!!!!!!!!!!!(B
-$B!!!!!!!!!!!!(,(,(,(,(,(,(,(,(,(,(,(,(,(B
-$B!!!!!!!!!!(B   $B5.J}MM$O!*$4B8$8$G$9$+!*(B
-$B!!!!!!!!!!!!(,(,(,(,(,(,(,(,(,(,(,(,(,(B
-$B!!$D$$$K%0%i%s%I%*!<%W%s$NF|Dx$,7h$^$j$^$7$?!*(B
-$B!!$=$l$^$G$K5.J}$N%]%8%7%g%s$r3NJ]$7$FCV$$$F2<$5$$!*(B
-$B!!"-!!!!"-!!(B
-http://fortn.lv-jpn.com/indx.cgi?id=world
-$B!!!!!!(B
-$B!!!!!!!!!!!!!!(,(,(,(,(,(,(,(,(,(,(,(,(,(,(B
-$B!!!!!!!!!!!!!!F/$/%^%^$N!*;d$K$b=PMh$k;v!*(B
-$B!!!!!!!!!!!!!!(,(,(,(,(,(,(,(,(,(,(,(,(,(,(B
-$B:_8K$J$7!&%;%_%J!<;22C$J$7!&=i?4<T$K$b4JC1!*!&%5%]!<%H(B
-$BBN@)%P%C%A%j(B
-$B;22C<T$N(B8$B3d$,=w@-$NJ}$H$$$&$N$bG<F@$G$9(B
-
-http://stag-n.jp/jc/mo/
-
-$B!!!!!!!!!!!!(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(B
-$B!Z9-9pEj9F?o;~Jg=8Cf(B !!$B![(B
-$B9-9p!!#52s7G:\#3#0F|$G#3#0#0#01_(B
-$B9-9p!!#72s7G:\#5F|$G#4#0#0#01_(B
-$B9-9p#1#02s7G:\#6#0F|$G#5#0#0#01_(B
-$B!!!!!!!!(B
-$B!}!!K\F|$bEj9F!*$"$j$,$H$&$4$6$$$^$7$?"v!}(B
- <<$B%a%k%^%,H/9T<T!d!d3Z!9%H%/%H%/>pJs<R(B
-yazawa@easy.to
-
-$B"#LH@U;v9`(B
-$BEv%a!<%k%^%,%8%s$K7G:\$7$F$$$k>pJs$K4X$7$FH/9T<T$G$O0l@Z$N(B
-$B@UG$$rIi$$$^$;$s!#(B
-$B0l@Z$N@UG$$rIi$$$+$M$^$9$N$G$4N;>5$/$@$5$$!#7G:\5-;v$K4X$9(B
-$B$k$*Ld$$9g$o$;$OD>@\Ej9F<T$X$*4j$$$$$?$7$^$9!#(B
-
-$B!!!!!!!!!!!z!z!z!!:#F|$NE75$M=Js!!!z!z!z(B
-
-$B"#!!%"%I%l%9$GG[?.2r=|!!"#(B
-$B!~K\%a%k%^%,$NG[?.ITMW!"$^$?$OEPO?$7$?3P$($N$J$$>l9g$O(B
-$B!!<!$N%"%I%l%9$+$i$NEPO?$K$h$j2r=|$5$;$FD:$-$^$9!#!!!!!!!!!!!!!!(B
-http://bck.t/mlstp
-
-$B!!!!!!(,(,(,KhD+8+$l$k!*!!A49q$N$*E75$(,(,!!(B
-
--------------------------------------------
-4$B7n(B12$BF|(B11$B;~H/I=(B
-
-$B<gMWET;T(B    $B:#Lk(B                $BL@F|(B
-$B;%KZ(B        $BF^$j$N$A;~!9@2$l(B    $B@2$l(B                
-$B@gBf(B        $B@2$l(B                $BF^$j;~!9@2$l(B        
-$BEl5~(B        $B@2$l(B                $B@2$l$N$A;~!9F^$j(B    
-$BD9Ln(B        $B@2$l(B                $B@2$l(B                
-$B@E2,(B        $B@2$l(B                $B@2$l$N$A;~!9F^$j(B    
-$BL>8E20(B      $B@2$l(B                $B@2$l$N$A;~!9F^$j(B    
-$B?73c(B        $B@2$l(B                $B@2$l(B                
-$B6bBt(B        $B@2$l(B                $B@2$l(B                
-$BBg:e(B        $B@2$l(B                $B@2$l$N$A;~!9F^$j(B    
-$B2,;3(B        $B@2$l(B                $B@2$l$N$A;~!9F^$j(B    
-$B9-Eg(B        $B@2$l(B                $B@2$l$N$A0l;~1+(B      
-$B9b>>(B        $B@2$l(B                $BF^$j(B                
-$BJ!2,(B        $B@2$l$N$A;~!9F^$j(B    $BF^$j0l;~1+(B          
-$B</;yEg(B      $B@2$l$N$A;~!9F^$j(B    $B1+(B                  
-$BFaGF(B        $B@2$l(B                $B@2$l(B                
-
-
-

mozilla/mstone/gd.mk

@@ -1,64 +0,0 @@
-# optional component libgd
-# This should be run using 'gmake'
-########################################################################
-
-topsrcdir	= .
-
-ifndef INCLUDED_CONFIG_MK
-include $(topsrcdir)/config/config.mk
-endif
-
-ifneq ("$(LIBGD_DIR)", "")
-LIBGD_OBJDIR	= $(OBJDIR)/gd
-LIBGD		= $(LIBGD_OBJDIR)/libgd.$(LIB_SUFFIX)
-GDDEMO		= $(LIBGD_OBJDIR)/gddemo$(EXE_SUFFIX)
-GIFTOGD		= $(LIBGD_OBJDIR)/giftogd$(EXE_SUFFIX)
-WEBGIF		= $(LIBGD_OBJDIR)/webgif$(EXE_SUFFIX)
-
-#LIBPATH	+= -L$(LIBGD_OBJDIR)
-#INCLUDES	+= -I./$(LIBGD_DIR)
-
-LIBGD_SRCS	= gd.c gdfontt.c gdfonts.c gdfontmb.c gdfontl.c gdfontg.c
-LIBGD_SRCS2	= $(addprefix $(LIBGD_DIR)/, $(LIBGD_SRCS))
-
-LIBGD_OBJS	= $(addprefix $(LIBGD_OBJDIR)/, $(LIBGD_SRCS:.c=.$(OBJ_SUFFIX)))
-
-LIBGD_ALL	= $(LIBGD_OBJDIR) $(LIBGD) $(GDDEMO) $(GIFTOGD) $(WEBGIF)
-
-libgd:: $(LIBGD_ALL)
-
-$(LIBGD_OBJDIR):
-ifeq ($(ARCH), WINNT)
-	mkdir $(LIBGD_OBJDIR)
-else
-	[ -d $(LIBGD_OBJDIR) ] || mkdir -p $(LIBGD_OBJDIR)
-endif
-
-$(LIBGD): $(LIBGD_OBJS)
-	@$(ECHO) "\n===== [`date`] making libgd...\n"
-	$(AR) rc $(LIBGD) $(LIBGD_OBJS)
-	cp $(LIBGD_DIR)/gd.h $(LIBGD_OBJDIR)
-	cp $(LIBGD_DIR)/demoin.gif $(LIBGD_OBJDIR)
-	cp $(LIBGD_DIR)/readme.txt $(LIBGD_OBJDIR)/gd.txt
-	cp $(LIBGD_DIR)/index.html $(LIBGD_OBJDIR)/gd.html
-
-$(GDDEMO): $(LIBGD) $(LIBGD_OBJDIR)/gddemo.$(OBJ_SUFFIX)
-	$(COMPILE) $(LIBGD_OBJDIR)/gddemo.$(OBJ_SUFFIX) $(LIBPATH) $(LIBGD) $(LIBS) $(OS_LINKFLAGS) -o $(GDDEMO)
-
-$(GIFTOGD): $(LIBGD) $(LIBGD_OBJDIR)/giftogd.$(OBJ_SUFFIX)
-	$(COMPILE) $(LIBGD_OBJDIR)/giftogd.$(OBJ_SUFFIX) $(LIBPATH) $(LIBGD) $(LIBS) $(OS_LINKFLAGS) -o $(GIFTOGD)
-
-$(WEBGIF): $(LIBGD) $(LIBGD_OBJDIR)/webgif.$(OBJ_SUFFIX)
-	$(COMPILE) $(LIBGD_OBJDIR)/webgif.$(OBJ_SUFFIX) $(LIBPATH) $(LIBGD) $(LIBS) $(OS_LINKFLAGS) -o $(WEBGIF)
-
-distclean::
-	$(RM) $(LIBGD) $(LIBGD_OBJS)
-
-$(LIBGD_OBJDIR)/%.$(OBJ_SUFFIX): $(LIBGD_DIR)/%.c
-ifeq ($(ARCH), WINNT)
-	$(COMPILE) -c -MT $< -Fo$(LIBGD_OBJDIR)/$*.$(OBJ_SUFFIX)
-else	
-	$(COMPILE) -c $< -o $(LIBGD_OBJDIR)/$*.$(OBJ_SUFFIX)
-endif
-
-endif

mozilla/mstone/gnuplot.mk

@@ -1,57 +0,0 @@
-# optional component gnuplot (can use libgd)
-# This should be run using 'gmake'
-########################################################################
-
-topsrcdir	= .
-
-ifndef INCLUDED_CONFIG_MK
-include $(topsrcdir)/config/config.mk
-endif
-
-ifneq ("$(GNUPLOT_DIR)", "")
-GNUPLOT		= gnuplot$(EXESUFFIX)
-GNUPLOT_OBJDIR	= $(OBJDIR)/gnuplot
-GNUPLOT_TARGET	= $(GNUPLOT_OBJDIR)/$(GNUPLOT)
-GNUPLOT_HELP	= $(GNUPLOT_OBJDIR)/gnuplot.gih
-GNUPLOT_CONFIG_H = $(GNUPLOT_OBJDIR)/config.h
-ifneq ("$(LIBGD_DIR)", "")
-  GNUPLOT_CONFIG_OPTS = --prefix=/opt/mailstone --with-gd=../$(OBJDIR)/gd --with-png=no --without-linux-vga
-endif
-
-GNUPLOT_ALL	= $(GNUPLOT_OBJDIR) $(GNUPLOT_TARGET) $(GNUPLOT_HELP)
-
-gnuplot:: $(GNUPLOT_ALL)
-
-$(GNUPLOT_OBJDIR):
-ifeq ($(ARCH), WINNT)
-	mkdir $(GNUPLOT_OBJDIR)
-else
-	[ -d $(GNUPLOT_OBJDIR) ] || mkdir -p $(GNUPLOT_OBJDIR)
-endif
-
-$(GNUPLOT_TARGET): $(GNUPLOT_CONFIG_H)
-	@$(ECHO) "\n===== [`date`] making gnuplot...\n"
-	(cd $(GNUPLOT_OBJDIR); $(MAKE) MAKE=$(MAKE) all)
-
-$(GNUPLOT_HELP):
-	cp $(GNUPLOT_DIR)/docs/gnuplot.1 $(GNUPLOT_OBJDIR)
-	cp $(GNUPLOT_DIR)/Copyright $(GNUPLOT_OBJDIR)
-	cp $(GNUPLOT_OBJDIR)/docs/gnuplot.gih $(GNUPLOT_HELP)
-
-$(GNUPLOT_CONFIG_H):
-	@$(ECHO) "\n===== [`date`] making gnuplot config.h...\n"
-	(cd $(GNUPLOT_OBJDIR); CC="$(CC) $(CFLAGS)" ../../../$(GNUPLOT_DIR)/configure $(GNUPLOT_CONFIG_OPTS))
-
-distclean::
-	[ ! -f $(GNUPLOT_OBJDIR)/Makefile ] || \
-	  (cd $(GNUPLOT_OBJDIR); $(MAKE) MAKE=$(MAKE) distclean)
-	$(RM) $(GNUPLOT_TARGET) $(GNUPLOT_CONFIG_H)
-
-$(GNUPLOT_OBJDIR)/%.$(OBJ_SUFFIX): $(GNUPLOT_DIR)/%.c
-ifeq ($(ARCH), WINNT)
-	$(COMPILE) -c -MT $< -Fo$(GNUPLOT_OBJDIR)/$*.$(OBJ_SUFFIX)
-else	
-	$(COMPILE) -c $< -o $(GNUPLOT_OBJDIR)/$*.$(OBJ_SUFFIX)
-endif
-
-endif

mozilla/mstone/mailstone.dsp

@@ -1,97 +0,0 @@
-# Microsoft Developer Studio Project File - Name="mailstone" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Console Application" 0x0103
-
-CFG=mailstone - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "mailstone.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "mailstone.mak" CFG="mailstone - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "mailstone - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "mailstone - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "mailstone - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "built\WINNT4.0_OPT.OBJ"
-# PROP Intermediate_Dir "built\WINNT4.0_OPT.OBJ"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D VERSION="4.1" /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /FD /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# Begin Special Build Tool
-OutDir=.\built\WINNT4.0_OPT.OBJ
-SOURCE="$(InputPath)"
-PostBuild_Cmds=if not exist built\package\WINNT4.0_OPT.OBJ\nul mkdir built\package\WINNT4.0_OPT.OBJ	copy $(OutDir)\mailclient.exe built\package\WINNT4.0_OPT.OBJ
-# End Special Build Tool
-
-!ELSEIF  "$(CFG)" == "mailstone - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "built\WINNT4.0_DBG.OBJ"
-# PROP Intermediate_Dir "built\WINNT4.0_DBG.OBJ"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /Zi /Od /D VERSION="4.1" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN32" /FR /FD /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# Begin Special Build Tool
-OutDir=.\built\WINNT4.0_DBG.OBJ
-SOURCE="$(InputPath)"
-PostBuild_Cmds=if not exist built\package\WINNT4.0_DBG.OBJ\nul mkdir built\package\WINNT4.0_DBG.OBJ	copy $(OutDir)\mailclient.exe built\package\WINNT4.0_DBG.OBJ
-# End Special Build Tool
-
-!ENDIF 
-
-# Begin Target
-
-# Name "mailstone - Win32 Release"
-# Name "mailstone - Win32 Debug"
-# End Target
-# End Project

mozilla/mstone/mailstone.dsw

@@ -1,74 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "gnuplot"=".\src\gnuplot-3.7\gnuplot.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-    Begin Project Dependency
-    Project_Dep_Name libgd
-    End Project Dependency
-}}}
-
-###############################################################################
-
-Project: "libgd"=.\src\gd1.3\libgd.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Project: "mailclient"=.\src\mailclient.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Project: "mailstone"=.\mailstone.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-    Begin Project Dependency
-    Project_Dep_Name mailclient
-    End Project Dependency
-    Begin Project Dependency
-    Project_Dep_Name gnuplot
-    End Project Dependency
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

mozilla/mstone/mailstone.mak

@@ -1,221 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Based on mailstone.dsp
-!IF "$(CFG)" == ""
-CFG=mailstone - Win32 Debug
-!MESSAGE No configuration specified. Defaulting to mailstone - Win32 Debug.
-!ENDIF 
-
-!IF "$(CFG)" != "mailstone - Win32 Release" && "$(CFG)" != "mailstone - Win32 Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "mailstone.mak" CFG="mailstone - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "mailstone - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "mailstone - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "mailstone - Win32 Release"
-
-OUTDIR=.\built\WINNT4.0_OPT.OBJ
-INTDIR=.\built\WINNT4.0_OPT.OBJ
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : 
-
-!ELSE 
-
-ALL : "gnuplot - Win32 Release" "mailclient - Win32 Release" 
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"mailclient - Win32 ReleaseCLEAN" "gnuplot - Win32 ReleaseCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@if exist $(INTDIR)\postbld.dep erase $(INTDIR)\postbld.dep
-	-@if exist built\package\WINNT4.0_OPT.OBJ\mailclient.exe erase built\package\WINNT4.0_OPT.OBJ\mailclient.exe
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\mailstone.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\mailstone.pdb" /machine:I386 /out:"$(OUTDIR)\mailstone.exe" 
-LINK32_OBJS= \
-	
-OutDir=.\built\WINNT4.0_OPT.OBJ
-SOURCE="$(InputPath)"
-DS_POSTBUILD_DEP=$(INTDIR)\postbld.dep
-
-ALL : $(DS_POSTBUILD_DEP)
-
-$(DS_POSTBUILD_DEP) : "gnuplot - Win32 Release" "mailclient - Win32 Release" 
-   if not exist built\package\WINNT4.0_OPT.OBJ\nul mkdir built\package\WINNT4.0_OPT.OBJ
-	copy .\built\WINNT4.0_OPT.OBJ\mailclient.exe built\package\WINNT4.0_OPT.OBJ
-	echo Helper for Post-build step > "$(DS_POSTBUILD_DEP)"
-
-!ELSEIF  "$(CFG)" == "mailstone - Win32 Debug"
-
-OUTDIR=.\built\WINNT4.0_DBG.OBJ
-INTDIR=.\built\WINNT4.0_DBG.OBJ
-
-!IF "$(RECURSE)" == "0" 
-
-ALL : 
-
-!ELSE 
-
-ALL : "gnuplot - Win32 Debug" "mailclient - Win32 Debug" 
-
-!ENDIF 
-
-!IF "$(RECURSE)" == "1" 
-CLEAN :"mailclient - Win32 DebugCLEAN" "gnuplot - Win32 DebugCLEAN" 
-!ELSE 
-CLEAN :
-!ENDIF 
-	-@if exist $(INTDIR)\postbld.dep erase /q $(INTDIR)\postbld.dep
-	-@if exist built\package\WINNT4.0_DBG.OBJ\mailclient.exe erase /q built\package\WINNT4.0_DBG.OBJ\mailclient.exe
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP_PROJ=/nologo /MLd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN32" /FR"$(INTDIR)\\" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\mailstone.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-LINK32_FLAGS=kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\mailstone.pdb" /debug /machine:I386 /out:"$(OUTDIR)\mailstone.exe" /pdbtype:sept 
-LINK32_OBJS= \
-	
-OutDir=.\built\WINNT4.0_DBG.OBJ
-SOURCE="$(InputPath)"
-DS_POSTBUILD_DEP=$(INTDIR)\postbld.dep
-
-ALL : $(DS_POSTBUILD_DEP)
-
-$(DS_POSTBUILD_DEP) : "gnuplot - Win32 Debug" "mailclient - Win32 Debug" 
-   if not exist built\package\WINNT4.0_DBG.OBJ\nul mkdir built\package\WINNT4.0_DBG.OBJ
-	copy .\built\WINNT4.0_DBG.OBJ\mailclient.exe built\package\WINNT4.0_DBG.OBJ
-	echo Helper for Post-build step > "$(DS_POSTBUILD_DEP)"
-
-!ENDIF 
-
-.c{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.obj::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.c{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cpp{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-.cxx{$(INTDIR)}.sbr::
-   $(CPP) @<<
-   $(CPP_PROJ) $< 
-<<
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("mailstone.dep")
-!INCLUDE "mailstone.dep"
-!ELSE 
-!MESSAGE Warning: cannot find "mailstone.dep"
-!ENDIF 
-!ENDIF 
-
-
-!IF "$(CFG)" == "mailstone - Win32 Release" || "$(CFG)" == "mailstone - Win32 Debug"
-
-!IF  "$(CFG)" == "mailstone - Win32 Release"
-
-"mailclient - Win32 Release" : 
-   cd ".\src"
-   $(MAKE) /$(MAKEFLAGS) /F .\mailclient.mak CFG="mailclient - Win32 Release" 
-   cd ".."
-
-"mailclient - Win32 ReleaseCLEAN" : 
-   cd ".\src"
-   $(MAKE) /$(MAKEFLAGS) /F .\mailclient.mak CFG="mailclient - Win32 Release" RECURSE=1 CLEAN 
-   cd ".."
-
-!ELSEIF  "$(CFG)" == "mailstone - Win32 Debug"
-
-"mailclient - Win32 Debug" : 
-   cd ".\src"
-   $(MAKE) /$(MAKEFLAGS) /F .\mailclient.mak CFG="mailclient - Win32 Debug" 
-   cd ".."
-
-"mailclient - Win32 DebugCLEAN" : 
-   cd ".\src"
-   $(MAKE) /$(MAKEFLAGS) /F .\mailclient.mak CFG="mailclient - Win32 Debug" RECURSE=1 CLEAN 
-   cd ".."
-
-!ENDIF 
-
-!IF  "$(CFG)" == "mailstone - Win32 Release"
-
-"gnuplot - Win32 Release" : 
-   cd ".\src\gnuplot-3.7"
-   $(MAKE) /$(MAKEFLAGS) /F ".\gnuplot.mak" CFG="gnuplot - Win32 Release" 
-   cd "..\.."
-
-"gnuplot - Win32 ReleaseCLEAN" : 
-   cd ".\src\gnuplot-3.7"
-   $(MAKE) /$(MAKEFLAGS) /F ".\gnuplot.mak" CFG="gnuplot - Win32 Release" RECURSE=1 CLEAN 
-   cd "..\.."
-
-!ELSEIF  "$(CFG)" == "mailstone - Win32 Debug"
-
-"gnuplot - Win32 Debug" : 
-   cd ".\src\gnuplot-3.7"
-   $(MAKE) /$(MAKEFLAGS) /F ".\gnuplot.mak" CFG="gnuplot - Win32 Debug" 
-   cd "..\.."
-
-"gnuplot - Win32 DebugCLEAN" : 
-   cd ".\src\gnuplot-3.7"
-   $(MAKE) /$(MAKEFLAGS) /F ".\gnuplot.mak" CFG="gnuplot - Win32 Debug" RECURSE=1 CLEAN 
-   cd "..\.."
-
-!ENDIF 
-
-
-!ENDIF 
-

mozilla/mstone/man/man1/setup.1

@@ -1,56 +0,0 @@
-.\" @(#)template.1  1.2 10/22/96 template.1 "
-.TH setup 1 "5 Nov 1999" "iPlanet" "Mailstone"
-.SH NAME
-setup \- Configure Mailstone and copy bits to client machines
-.SH SYNOPSIS
-.B setup
-[
-.B \-w workload_file
-]
-.SH FILES
-Workload file are store in the
-.BR conf/
-directory and have the extension
-.BR .wld.
-
-
-.SH DESCRIPTION
-.B Setup
-will ask you to accept the licensing terms and ask for an initial
-configuration (if these steps have never been performed).  The test
-system configuration is stored in
-.BR conf/general.wld.
-.PP
-Once there is a valid configuration
-.B setup
-will copy the appropriate
-.B bin/mailclient
-and 
-.B data/*.msg
-files to each client machine.
-.PP
-.B Setup
-should be run whenever a new client machine is added, the message file change,
-or files are missing on the client machine (due to a clean up of
-.B /var/tmp.
-.SH OPTIONS
-.TP 12
-.B \-w workload_file
-Specify a workload other than conf/general.wld.  This file must define
-(or include)
-.B CLIENT
-sections that list the client machines to use.
-.SH EXAMPLES
-.IP
-.BR example%  " setup"
-.SH SEE ALSO
-.PP
-.BR mailstone (1)
-.BR checktime (1)
-.BR timesync (1)
-.BR mstone (1)
-.BR workloads (5)
-.SH DIAGNOSTICS
-The most common problem is insufficient rsh permissions.
-
-Most errors should be self explanitory.

mozilla/mstone/mstone

@@ -1,188 +0,0 @@
-#!/bin/sh
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1999-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# push or clean up mailclient and message files to client hosts
-# Usage: setup|cleanup|timesync|checktime|config [mode] [-w workload_file]
-#
-# Setup (or cleanup) OS specific versions of mailclient and utilities
-
-gconf=conf/general.wld	# default file for machines info
-
-# figure out the host arch
-run_nsarch() {
-    if [ ! -x bin/nsarch ] ; then
-	echo "Installation error!  Cannot locate $1 or nsarch.\n"
-	exit 1
-    fi
-
-    OUROS=`bin/nsarch`
-    # deal with new versions of OS falling back to versions we have
-    if [ ! -d build/$OUROS ] ; then
-	shortos=`echo $OUROS | sed -e 's/[0-9].*//'`
-	near=`ls build | grep $shortos`
-	if [ -n "$near" ] ; then
-	  near=`echo $near | cut -f2 -d' '`
-	  echo "No support for $OUROS, using $near"
-	  OUROS=$near
-	else
-	  echo "No support for $OUROS and nothing similar"
- 	fi
-    fi
-    export OUROS
-}
-
-# Setup perl to work from perl/bin/perl
-setup_perl() {
-    [ -n "$OUROS" ] || run_nsarch $1
-    if [ -d  perl ] ; then	# found it in our distribution
-	(cd perl; ln -s arch/$OUROS bin)
-    else
-	  local=`which perl | wc -w`
-	  if [ 1 -eq "$local" ] ; then
-	    [ -d perl/bin ] || mkdir -p perl/bin
-	    (cd perl/bin; ln -s `which perl` perl)
-	  else
-	    echo "No packaged version of perl and no local version"
-	    exit 1;
-	  fi
-    fi
-}
-
-# we always need this
-[ -d perl/bin ] || setup_perl	# need perl, even for cleanup mode
-
-# Get the default version of mailclient
-setup_mailclient() {
-    [ -n "$OUROS" ] || run_nsarch $1
-    (cd bin; ln -s ../build/$OUROS/mailclient ./ )
-}
-
-# setup_file source_dir directory filename
-# usually link in a directory.
-# if needed, make the directory and link a local executable.
-setup_dir_file() {
-    [ -n "$OUROS" ] || run_nsarch $1
-    if [ -d  $1/$OUROS/$2 ] ; then	# found it in our distribution
-      ln -s $1/$OUROS/$2 $2
-    else			# look for a system copy
-      local=`which $3 | wc -w`
-      if [ 1 -eq "$local" ] ; then
-	[ -d $2 ] || mkdir -p $2
-	(cd $2; ln -s `which $3` $3)
-      else
-	echo "WARNING: No packaged version of $3 and no local version"
-	echo "	Operation may be severely limited"
-      fi
-    fi
-}
-
-
-# Pick up mode as an argument
-if [ $# -gt 0 -a \( "$1" = timesync -o "$1" = checktime \
-	-o "$1" = setup -o "$1" = cleanup -o "$1" = config \
-	-o "$1" = mstone \) ] ; then
-	mode=$1
-	shift
-else				# or the name we were called
-	mode=$0
-	sm=`echo $mode | cut -f2 -d/`	# strip ./ from name
-	if [ -n "$sm" ] ; then
-		mode=$sm
-	fi
-fi
-
-# see if setup was ever run
-if [ "$mode" != setup -a "$mode" != cleanup \
-	-a \( ! -x perl/bin/perl -o ! -f .license \) ] ; then
-    echo "mstone setup was never run.  Running setup."
-    mode=setup
-fi
-
-if [ "$mode" = setup ] ; then	# setup mode
-    # check to see if our binaries are configured right
-    #echo "Checking links"
-    [ -x gnuplot/gnuplot ] || setup_dir_file bin gnuplot gnuplot
-    [ -x bin/mailclient ] || setup_mailclient
-
-    # copy in an initial conf/general.wld, if needed
-    [ ! -f $gconf -a -f ${gconf}.in ] && cp ${gconf}.in $gconf
-fi
-
-# figure out an OS specific flags
-extra=""
-if [ `uname -s` = HP-UX ] ; then        # HP uses remsh for remote exec
-    extra="RSH=/usr/bin/remsh $extra"
-fi
-
-if [ "$mode" != mstone ] ; then	# other setup modes
-    perl/bin/perl -Ibin -- bin/setup.pl $mode -w $gconf $extra "$@"
-else				# run a mstone test
-    # This just runs the test with the right path to perl
-    # Usage: mstone testname
-    if [ -z "$1" -o "$1" = "-h" -o "$1" = "--help" ] ; then
-       echo "Usage: $0 testname [arguments]"
-       echo "Common arguments:"
-       echo "  -t time          Test time.  s=seconds, m=minutes, h=hours"
-       echo "  -r ramp_time     Connection ramp up time.  s=seconds, m=..."
-       echo "  -l load          Number of test clients to use."
-       echo "  -b 'banner'      Test description banner."
-       echo "  -n 'notes'       Test notes."
-       echo "Example:"
-       echo " ./mstone pop -t 10m -r 90s -l 24 -b 'Pop reads (full store)'"
-       exit 1
-    fi
-
-    testcase=$1			# get testname
-    shift
-
-    if [ -f $testcase ] ; then	# if they gave us the full path
-	testfile=$testcase
-    elif [ -f conf/$testcase.wld ] ; then
-	testfile="conf/$testcase.wld"
-    else
-	echo "Cannot find test: $testcase"
-    fi
-
-    exec perl/bin/perl -Ibin -- bin/mailmaster.pl $extra -w $testfile "$@"
-    # no need to return
-fi
-
-if [ "$mode" = cleanup ] ; then # cleanup mode
-    #echo "Check for old links"
-    # remove any configured links. if these are directories, it will fail
-    rm -f perl/bin gd gnuplot 2> /dev/null
-
-    # the built in [ on Solaris does not have -L
-    /usr/bin/test -L bin/mailclient && rm -f bin/mailclient
-fi