put this here

git-svn-id: svn://10.0.0.236/branches/alecf_fastfolder_branch@51617 18797224-902f-48f8-a5cc-f745e15eee43

mozilla/mailnews/base/src/nsMsgMailSession.cpp

@@ -0,0 +1,298 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "msgCore.h" // for pre-compiled headers
+//#include "nsIMsgIdentity.h"
+#include "nsIMsgAccountManager.h"
+//#include "nsIPop3IncomingServer.h"
+#include "nsMsgMailSession.h"
+#include "nsMsgLocalCID.h"
+#include "nsMsgBaseCID.h"
+#include "nsCOMPtr.h"
+#include "nsMsgFolderCache.h"
+#include "nsIFileLocator.h"
+#include "nsFileLocations.h"
+#include "nsIMsgStatusFeedback.h"
+
+NS_IMPL_ISUPPORTS(nsMsgMailSession, nsCOMTypeInfo<nsIMsgMailSession>::GetIID());
+
+static NS_DEFINE_CID(kMsgAccountManagerCID, NS_MSGACCOUNTMANAGER_CID);
+static NS_DEFINE_CID(kMsgFolderCacheCID, NS_MSGFOLDERCACHE_CID);
+static NS_DEFINE_IID(kIFileLocatorIID,      NS_IFILELOCATOR_IID);
+static NS_DEFINE_CID(kFileLocatorCID,       NS_FILELOCATOR_CID);
+ 
+//static NS_DEFINE_CID(kMsgIdentityCID, NS_MSGIDENTITY_CID);
+//static NS_DEFINE_CID(kPop3IncomingServerCID, NS_POP3INCOMINGSERVER_CID);
+//static NS_DEFINE_CID(kPrefCID, NS_PREF_CID);
+    
+
+nsMsgMailSession::nsMsgMailSession():
+  mRefCnt(0),
+  m_accountManager(0),
+  m_msgFolderCache(0)
+{
+
+	NS_INIT_REFCNT();
+}
+
+
+nsMsgMailSession::~nsMsgMailSession()
+{
+	Shutdown();
+}
+
+nsresult nsMsgMailSession::Init()
+{
+	nsresult rv = NS_NewISupportsArray(getter_AddRefs(mListeners));
+
+	return rv;
+
+}
+
+nsresult nsMsgMailSession::Shutdown()
+{
+  if(m_accountManager)
+  {
+	  if (m_msgFolderCache)
+		m_accountManager->WriteToFolderCache(m_msgFolderCache);
+	  m_accountManager->CloseCachedConnections();
+	  m_accountManager->UnloadAccounts();
+  }
+
+  NS_IF_RELEASE(m_accountManager);
+
+  NS_IF_RELEASE(m_msgFolderCache);
+
+  return NS_OK;
+}
+
+// nsIMsgMailSession
+nsresult nsMsgMailSession::GetCurrentIdentity(nsIMsgIdentity ** aIdentity)
+{
+  nsresult rv;
+
+  nsCOMPtr<nsIMsgAccountManager> accountManager;
+  rv = GetAccountManager(getter_AddRefs(accountManager));
+  if (NS_FAILED(rv)) return rv;
+
+  nsCOMPtr<nsIMsgAccount> defaultAccount;
+  rv = accountManager->GetDefaultAccount(getter_AddRefs(defaultAccount));
+  if (NS_FAILED(rv)) return rv;
+  
+  rv = defaultAccount->GetDefaultIdentity(aIdentity);
+  if (NS_SUCCEEDED(rv))
+  	NS_ADDREF(*aIdentity);
+  
+  return rv;
+}
+
+nsresult nsMsgMailSession::GetCurrentServer(nsIMsgIncomingServer ** aServer)
+{
+  nsresult rv=NS_ERROR_UNEXPECTED;
+
+  nsCOMPtr<nsIMsgAccountManager> accountManager;
+  rv = GetAccountManager(getter_AddRefs(accountManager));
+  if (NS_FAILED(rv)) return rv;
+  
+  nsCOMPtr<nsIMsgAccount> defaultAccount;
+  rv = accountManager->GetDefaultAccount(getter_AddRefs(defaultAccount));
+  if (NS_FAILED(rv)) return rv;
+
+  //if successful aServer will be addref'd by GetIncomingServer
+  rv = defaultAccount->GetIncomingServer(aServer);
+
+  return rv;
+}
+
+nsresult nsMsgMailSession::GetAccountManager(nsIMsgAccountManager* *aAM)
+{
+  NS_ENSURE_ARG_POINTER(aAM);
+
+  nsresult rv;
+  
+  NS_WITH_SERVICE(nsIMsgAccountManager, accountManager, kMsgAccountManagerCID, &rv);
+  if (NS_FAILED(rv)) return rv;
+  accountManager->LoadAccounts();
+    
+  *aAM = accountManager;
+  NS_IF_ADDREF(*aAM);
+  return NS_OK;
+}
+
+nsresult nsMsgMailSession::GetFolderCache(nsIMsgFolderCache* *aFolderCache)
+{
+  if (!aFolderCache) return NS_ERROR_NULL_POINTER;
+
+  nsresult rv = NS_OK;
+
+  if (!m_msgFolderCache)
+  {
+    rv = nsComponentManager::CreateInstance(kMsgFolderCacheCID,
+                                            NULL,
+                                            nsCOMTypeInfo<nsIMsgFolderCache>::GetIID(),
+                                            (void **)&m_msgFolderCache);
+    if (NS_FAILED(rv))
+		return rv;
+
+    nsCOMPtr <nsIFileSpec> cacheFile;
+    NS_WITH_SERVICE(nsIFileLocator, locator, kFileLocatorCID, &rv);
+    if (NS_FAILED(rv)) return rv;
+
+    rv = locator->GetFileLocation(nsSpecialFileSpec::App_MessengerFolderCache50, getter_AddRefs(cacheFile));
+    if (NS_FAILED(rv)) return rv;
+
+    m_msgFolderCache->Init(cacheFile);
+
+  }
+
+  *aFolderCache = m_msgFolderCache;
+  NS_IF_ADDREF(*aFolderCache);
+  return rv;
+}
+
+nsresult nsMsgMailSession::GetTemporaryMsgStatusFeedback(nsIMsgStatusFeedback* *aMsgStatusFeedback)
+{
+  if (!aMsgStatusFeedback) return NS_ERROR_NULL_POINTER;
+  
+  *aMsgStatusFeedback = m_temporaryMsgStatusFeedback;
+  NS_IF_ADDREF(*aMsgStatusFeedback);
+  return NS_OK;
+}
+
+
+nsresult nsMsgMailSession::SetTemporaryMsgStatusFeedback(nsIMsgStatusFeedback* aMsgStatusFeedback)
+{
+  m_temporaryMsgStatusFeedback = do_QueryInterface(aMsgStatusFeedback);
+  return NS_OK;
+}
+
+
+NS_IMETHODIMP nsMsgMailSession::AddFolderListener(nsIFolderListener * listener)
+{
+  mListeners->AppendElement(listener);
+  return NS_OK;
+
+}
+
+NS_IMETHODIMP nsMsgMailSession::RemoveFolderListener(nsIFolderListener * listener)
+{
+  mListeners->RemoveElement(listener);
+  return NS_OK;
+
+}
+
+NS_IMETHODIMP
+nsMsgMailSession::NotifyFolderItemPropertyChanged(nsISupports *item,
+                                                  const char *property,
+                                                  const char* oldValue,
+                                                  const char* newValue)
+{
+	nsresult rv;
+	PRUint32 count;
+	rv = mListeners->Count(&count);
+	if (NS_FAILED(rv)) return rv;
+
+	
+	for(PRUint32 i = 0; i < count; i++)
+	{
+		nsCOMPtr<nsIFolderListener> listener = getter_AddRefs((nsIFolderListener*)mListeners->ElementAt(i));
+		listener->OnItemPropertyChanged(item, property, oldValue, newValue);
+	}
+
+	return NS_OK;
+
+}
+
+NS_IMETHODIMP
+nsMsgMailSession::NotifyFolderItemPropertyFlagChanged(nsISupports *item,
+                                                      const char *property,
+                                                      PRUint32 oldValue,
+                                                      PRUint32 newValue)
+{
+	nsresult rv;
+	PRUint32 count;
+	rv = mListeners->Count(&count);
+	if (NS_FAILED(rv)) return rv;
+
+	
+	for(PRUint32 i = 0; i < count; i++)
+	{
+		nsCOMPtr<nsIFolderListener> listener = getter_AddRefs((nsIFolderListener*)mListeners->ElementAt(i));
+		listener->OnItemPropertyFlagChanged(item, property, oldValue, newValue);
+	}
+
+	return NS_OK;
+
+}
+
+NS_IMETHODIMP nsMsgMailSession::NotifyFolderItemAdded(nsIFolder *folder, nsISupports *item)
+{
+	nsresult rv;
+	PRUint32 count;
+	rv = mListeners->Count(&count);
+	if (NS_FAILED(rv)) return rv;
+
+	
+	for(PRUint32 i = 0; i < count; i++)
+	{
+		nsCOMPtr<nsIFolderListener> listener = getter_AddRefs((nsIFolderListener*)mListeners->ElementAt(i));
+		listener->OnItemAdded(folder, item);
+	}
+
+	return NS_OK;
+
+}
+
+NS_IMETHODIMP nsMsgMailSession::NotifyFolderItemDeleted(nsIFolder *folder, nsISupports *item)
+{
+	nsresult rv;
+	PRUint32 count;
+	rv = mListeners->Count(&count);
+	if (NS_FAILED(rv)) return rv;
+
+	
+	for(PRUint32 i = 0; i < count; i++)
+	{
+		nsCOMPtr<nsIFolderListener> listener = getter_AddRefs((nsIFolderListener*)mListeners->ElementAt(i));
+		listener->OnItemRemoved(folder, item);
+	}
+	return NS_OK;
+
+}
+
+NS_IMETHODIMP  nsMsgMailSession::NotifyFolderLoaded(nsIFolder *folder)
+{
+
+	nsresult rv;
+	PRUint32 count;
+	rv = mListeners->Count(&count);
+	if (NS_FAILED(rv)) return rv;
+
+	
+	for(PRUint32 i = 0; i < count; i++)
+	{
+		nsCOMPtr<nsIFolderListener> listener = getter_AddRefs((nsIFolderListener*)mListeners->ElementAt(i));
+		listener->OnFolderLoaded(folder);
+	}
+	return NS_OK;
+
+
+}
+
+
+

mozilla/mailnews/base/util/MANIFEST

@@ -0,0 +1,35 @@
+# The contents of this file are subject to the Netscape Public License
+# Version 1.0 (the "NPL"); you may not use this file except in
+# compliance with the NPL.  You may obtain a copy of the NPL at
+# http://www.mozilla.org/NPL/
+#
+# Software distributed under the NPL is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+# for the specific language governing rights and limitations under the
+# NPL.
+#
+# The Initial Developer of this code under the NPL is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+# Reserved.
+#
+# This is a list of local files which get copied to the mozilla:dist:mailnews directory
+#
+
+nsMsgLineBuffer.h
+nsMsgGroupRecord.h
+nsUInt32Array.h
+nsMsgKeySet.h
+nsMsgFolder.h
+nsMsgDBFolder.h
+nsLocalFolderSummarySpec.h
+nsMsgIdentity.h
+nsMsgIncomingServer.h
+nsNewsSummarySpec.h
+nsMsgUtils.h
+nsMessage.h
+nsMsgProtocol.h
+nsMsgTxn.h
+nsMsgMailNewsUrl.h
+nsMsgI18N.h
+

mozilla/mailnews/base/util/Makefile.in

@@ -0,0 +1,75 @@
+#
+# The contents of this file are subject to the Netscape Public License
+# Version 1.0 (the "NPL"); you may not use this file except in
+# compliance with the NPL.  You may obtain a copy of the NPL at
+# http://www.mozilla.org/NPL/
+#
+# Software distributed under the NPL is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+# for the specific language governing rights and limitations under the
+# NPL.
+#
+# The Initial Developer of this code under the NPL is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+# Reserved.
+#
+
+DEPTH		= ../../..
+topsrcdir	= @top_srcdir@
+srcdir		= @srcdir@
+VPATH		= @srcdir@
+
+include $(DEPTH)/config/autoconf.mk
+
+MODULE		= msgbaseutil
+LIBRARY_NAME	= msgbaseutil
+
+CPPSRCS		= \
+		nsMsgGroupRecord.cpp \
+		nsMsgLineBuffer.cpp \
+		nsMsgFolder.cpp \
+		nsMsgDBFolder.cpp \
+		nsUInt32Array.cpp \
+		nsMsgKeySet.cpp \
+		nsLocalFolderSummarySpec.cpp \
+		nsNewsSummarySpec.cpp \
+		nsMsgIdentity.cpp \
+		nsMsgIncomingServer.cpp \
+		nsMsgUtils.cpp \
+		nsMessage.cpp \
+		nsMsgProtocol.cpp \
+		nsMsgMailNewsUrl.cpp \
+		nsMsgTxn.cpp \
+		nsMsgI18N.cpp \
+		$(NULL)
+
+EXPORTS		= \
+		nsMsgGroupRecord.h \
+		nsMsgLineBuffer.h \
+		nsUInt32Array.h \
+		nsMsgKeySet.h \
+		nsMsgFolder.h \
+		nsMsgDBFolder.h \
+		nsLocalFolderSummarySpec.h \
+		nsNewsSummarySpec.h \
+		nsMsgIdentity.h \
+		nsMsgIncomingServer.h \
+		nsMsgUtils.h \
+		nsMessage.h \
+		nsMsgProtocol.h \
+		nsMsgMailNewsUrl.h \
+		nsMsgTxn.h \
+		nsMsgI18N.h \
+		$(NULL)
+
+EXTRA_DSO_LDOPTS = \
+	-L$(DIST)/bin \
+	-L$(DIST)/lib \
+	-lxpcom \
+	-lrdfutil_s \
+	$(NSPR_LIBS) \
+	$(NULL)
+
+include $(topsrcdir)/config/rules.mk
+

mozilla/mailnews/base/util/macbuild/msgUtilPrefix.h

@@ -0,0 +1,21 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+
+
+#include "MacPrefix.h"

mozilla/mailnews/base/util/macbuild/msgUtilPrefixDebug.h

@@ -0,0 +1,21 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+
+
+#include "MacPrefix_debug.h"

mozilla/mailnews/base/util/makefile.win

@@ -0,0 +1,87 @@
+#!nmake
+#
+# The contents of this file are subject to the Netscape Public License
+# Version 1.0 (the "NPL"); you may not use this file except in
+# compliance with the NPL.  You may obtain a copy of the NPL at
+# http://www.mozilla.org/NPL/
+#
+# Software distributed under the NPL is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+# for the specific language governing rights and limitations under the
+# NPL.
+#
+# The Initial Developer of this code under the NPL is Netscape
+# Communications Corporation.  Portions created by Netscape are
+# Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+# Reserved.
+
+DEPTH=..\..\..
+MODULE= msgbsutl
+
+include <$(DEPTH)\config\config.mak>
+
+################################################################################
+## exports
+
+EXPORTS=                \
+	nsMsgLineBuffer.h	\
+	nsMsgGroupRecord.h  \
+	nsUInt32Array.h	\
+	nsMsgKeySet.h			\
+	nsMsgFolder.h			\
+	nsMsgDBFolder.h			\
+	nsLocalFolderSummarySpec.h	\
+	nsMsgIdentity.h			\
+	nsMsgIncomingServer.h	\
+	nsNewsSummarySpec.h \
+	nsMsgUtils.h \
+	nsMessage.h \
+	nsMsgProtocol.h \
+	nsMsgMailNewsUrl.h \
+	nsMsgTxn.h \
+	nsMsgI18N.h \
+	$(NULL)
+
+################################################################################
+## library
+
+LIBNAME = .\$(OBJDIR)\msgbsutl
+DLL = $(LIBNAME).dll
+
+DEFINES=-D_IMPL_NS_MSG_BASE
+
+LCFLAGS =		   \
+        $(LCFLAGS) \
+        $(DEFINES) \
+        $(NULL)
+
+CPP_OBJS=                               \
+	.\$(OBJDIR)\nsMsgGroupRecord.obj    \
+	.\$(OBJDIR)\nsMsgLineBuffer.obj     \
+	.\$(OBJDIR)\nsUInt32Array.obj		\
+	.\$(OBJDIR)\nsMsgKeySet.obj			\
+	.\$(OBJDIR)\nsMsgFolder.obj			\
+	.\$(OBJDIR)\nsMsgDBFolder.obj		\
+	.\$(OBJDIR)\nsLocalFolderSummarySpec.obj	\
+	.\$(OBJDIR)\nsMsgIdentity.obj		\
+	.\$(OBJDIR)\nsMsgIncomingServer.obj	\
+	.\$(OBJDIR)\nsNewsSummarySpec.obj	\
+	.\$(OBJDIR)\nsMsgUtils.obj			\
+	.\$(OBJDIR)\nsMessage.obj			\
+	.\$(OBJDIR)\nsMsgProtocol.obj		\
+	.\$(OBJDIR)\nsMsgMailNewsUrl.obj	\
+	.\$(OBJDIR)\nsMsgTxn.obj			\
+	.\$(OBJDIR)\nsMsgI18N.obj			\
+	$(NULL)
+
+LLIBS=								\
+	$(DIST)\lib\xpcom.lib			\
+	$(DIST)\lib\rdfutil_s.lib		\
+	$(LIBNSPR)						\
+	$(NULL)
+
+include <$(DEPTH)/config/rules.mak>
+
+libs:: $(DLL)
+	$(MAKE_INSTALL)  $(LIBNAME).$(DLL_SUFFIX) $(DIST)\bin
+	$(MAKE_INSTALL)  $(LIBNAME).$(LIB_SUFFIX) $(DIST)\lib

mozilla/mailnews/base/util/nsLocalFolderSummarySpec.cpp

@@ -0,0 +1,76 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "nsLocalFolderSummarySpec.h"
+#include "plstr.h"
+#include "nsString.h"
+
+MOZ_DECL_CTOR_COUNTER(nsLocalFolderSummarySpec);
+
+nsLocalFolderSummarySpec::~nsLocalFolderSummarySpec()
+{
+	MOZ_COUNT_DTOR(nsLocalFolderSummarySpec);
+
+}
+
+nsLocalFolderSummarySpec::nsLocalFolderSummarySpec()
+{
+	MOZ_COUNT_CTOR(nsLocalFolderSummarySpec);
+}
+
+nsLocalFolderSummarySpec::nsLocalFolderSummarySpec(const char *folderPath, PRBool create)
+  : nsFileSpec(folderPath, create)
+{
+	MOZ_COUNT_CTOR(nsLocalFolderSummarySpec);
+	CreateSummaryFileName();
+}
+
+nsLocalFolderSummarySpec::nsLocalFolderSummarySpec(const nsFileSpec& inFolderPath)
+: nsFileSpec(inFolderPath)
+{
+	MOZ_COUNT_CTOR(nsLocalFolderSummarySpec);
+	CreateSummaryFileName();
+}
+
+nsLocalFolderSummarySpec::nsLocalFolderSummarySpec(const nsFilePath &inFolderPath, PRBool create) : nsFileSpec(inFolderPath, create)
+{
+	MOZ_COUNT_CTOR(nsLocalFolderSummarySpec);
+	CreateSummaryFileName();
+}
+
+void nsLocalFolderSummarySpec::SetFolderName(const char *folderPath)
+{
+	*this = folderPath;
+}
+
+void nsLocalFolderSummarySpec::	CreateSummaryFileName()
+{
+	char *leafName = GetLeafName();
+
+	nsString fullLeafName(leafName);
+
+	// Append .msf (msg summary file) this is what windows will want.
+	// Mac and Unix can decide for themselves.
+
+	fullLeafName += ".msf";				// message summary file
+	char *cLeafName = fullLeafName.ToNewCString();
+	SetLeafName(cLeafName);
+    nsAllocator::Free(cLeafName);
+	PL_strfree(leafName);
+}
+

mozilla/mailnews/base/util/nsLocalFolderSummarySpec.h

@@ -0,0 +1,46 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#ifndef _nsLocalFolderSummarySpec_H
+#define _nsLocalFolderSummarySpec_H
+
+#include "msgCore.h"
+#include "nsFileSpec.h"
+
+// Class to name a summary file for a local mail folder,
+// given a full folder file spec. For windows, this just means tacking .msf on the end.
+// For Unix, it might mean something like putting a '.' on the front and .msgsummary on the end.
+// Note this class expects the invoking code to fully specify the folder path. 
+// This class does NOT prepend the local folder directory, or put .sbd on the containing
+// directory names.
+class NS_MSG_BASE nsLocalFolderSummarySpec : public nsFileSpec
+{
+public:
+			virtual ~nsLocalFolderSummarySpec();
+			nsLocalFolderSummarySpec();
+			nsLocalFolderSummarySpec(const char *folderPath, PRBool create = PR_FALSE);
+			nsLocalFolderSummarySpec(const nsFileSpec& inFolderPath);
+			nsLocalFolderSummarySpec(const nsFilePath &inFolderPath, PRBool create = PR_FALSE);
+			void SetFolderName(const char *folderPath);
+
+protected:
+	void	CreateSummaryFileName();
+
+};
+
+#endif

mozilla/mailnews/base/util/nsMessage.cpp

@@ -0,0 +1,509 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "msgCore.h"    // precompiled header...
+#include "nsMessage.h"
+#include "nsIMsgFolder.h"
+
+
+nsMessage::nsMessage(void)
+  : nsRDFResource(), mFolder(nsnull)
+{
+
+}
+
+nsMessage::~nsMessage(void)
+{
+	//Member variables are either nsCOMPtr's or ptrs we don't want to own.
+}
+
+NS_IMPL_ADDREF_INHERITED(nsMessage, nsRDFResource)
+NS_IMPL_RELEASE_INHERITED(nsMessage, nsRDFResource)                        
+
+NS_IMETHODIMP nsMessage::QueryInterface(REFNSIID aIID, void** aInstancePtr)
+{
+	if (!aInstancePtr) return NS_ERROR_NULL_POINTER;
+	*aInstancePtr = nsnull;
+	if (aIID.Equals(nsCOMTypeInfo<nsIMessage>::GetIID()) || aIID.Equals(nsCOMTypeInfo<nsIDBMessage>::GetIID()))
+	{
+		*aInstancePtr = NS_STATIC_CAST(nsIDBMessage*, this);
+	}              
+	if(*aInstancePtr)
+	{
+		AddRef();
+		return NS_OK;
+	}
+
+	return nsRDFResource::QueryInterface(aIID, aInstancePtr);
+}
+
+NS_IMETHODIMP
+nsMessage::Init(const char* aURI)
+{
+
+	return nsRDFResource::Init(aURI);
+}
+
+
+NS_IMETHODIMP nsMessage::GetProperty(const char *propertyName, nsString &resultProperty)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetProperty(propertyName, resultProperty);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetProperty(const char *propertyName, nsString &propertyStr)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetProperty(propertyName, propertyStr);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetUint32Property(const char *propertyName, PRUint32 *pResult)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetUint32Property(propertyName, pResult);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetUint32Property(const char *propertyName, PRUint32 propertyVal)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetUint32Property(propertyName, propertyVal);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetNumReferences(PRUint16 *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetNumReferences(result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetStringReference(PRInt32 refNum, nsCString &resultReference)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetStringReference(refNum, resultReference);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetDate(PRTime *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetDate(result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetDate(PRTime date)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetDate(date);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetMessageId(const char *messageId)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetMessageId(messageId);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetReferences(const char *references)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetReferences(references);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetCCList(const char *ccList)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetCCList(ccList);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetRecipients(const char *recipients, PRBool recipientsIsNewsgroup)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetRecipients(recipients, recipientsIsNewsgroup);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetRecipientsArray(const char *names, const char *addresses, PRUint32 numAddresses)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetRecipientsArray(names, addresses, numAddresses);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetCCListArray(const char *names, const char *addresses, PRUint32 numAddresses)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetCCListArray(names, addresses, numAddresses);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetAuthor(const char *author)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetAuthor(author);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetSubject(const char *subject)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetSubject(subject);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetStatusOffset(PRUint32 statusOffset)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetStatusOffset(statusOffset);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+
+NS_IMETHODIMP nsMessage::GetAuthor(nsString *resultAuthor)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetAuthor(resultAuthor);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetSubject(nsString *resultSubject)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetSubject(resultSubject);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetRecipients(nsString *resultRecipients)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetRecipients(resultRecipients);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetCCList(nsString *ccList)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetCCList(ccList);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetMessageId(nsCString *resultMessageId)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetMessageId(resultMessageId);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+
+NS_IMETHODIMP nsMessage::GetMime2DecodedAuthor(nsString *resultAuthor)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetMime2DecodedAuthor(resultAuthor);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetMime2DecodedSubject(nsString *resultSubject)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetMime2DecodedSubject(resultSubject);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetMime2DecodedRecipients(nsString *resultRecipients)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetMime2DecodedRecipients(resultRecipients);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+
+NS_IMETHODIMP nsMessage::GetAuthorCollationKey(nsString *resultAuthor)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetAuthorCollationKey(resultAuthor);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetSubjectCollationKey(nsString *resultSubject)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetSubjectCollationKey(resultSubject);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetRecipientsCollationKey(nsString *resultRecipients)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetRecipientsCollationKey(resultRecipients);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+
+NS_IMETHODIMP nsMessage::GetFlags(PRUint32 *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetFlags(result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetFlags(PRUint32 flags)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetFlags(flags);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::OrFlags(PRUint32 flags, PRUint32 *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->OrFlags(flags, result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::AndFlags(PRUint32 flags, PRUint32 *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->AndFlags(flags, result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::MarkRead(PRBool bRead)
+{
+	if(mMsgHdr)
+		return mMsgHdr->MarkRead(bRead);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::MarkFlagged(PRBool bFlagged)
+{
+	if(mMsgHdr)
+		return mMsgHdr->MarkFlagged(bFlagged);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetMessageKey(nsMsgKey *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetMessageKey(result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetThreadId(nsMsgKey *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetThreadId(result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetThreadId(nsMsgKey inKey)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetThreadId(inKey);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetMessageKey(nsMsgKey inKey)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetMessageKey(inKey);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetMessageSize(PRUint32 *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetMessageSize(result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetLineCount(PRUint32 *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetLineCount(result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetMessageSize(PRUint32 messageSize)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetMessageSize(messageSize);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetLineCount(PRUint32 lineCount)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetLineCount(lineCount);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetPriority(nsMsgPriority priority)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetPriority(priority);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetPriority(const char *priority)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetPriority(priority);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetPriority(nsMsgPriority *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetPriority(result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+
+NS_IMETHODIMP nsMessage::GetMessageOffset(PRUint32 *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetMessageOffset(result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetStatusOffset(PRUint32 *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetStatusOffset(result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetCharSet(nsString *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetCharSet(result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::GetThreadParent(nsMsgKey *result)
+{
+	if(mMsgHdr)
+		return mMsgHdr->GetThreadParent(result);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+NS_IMETHODIMP nsMessage::SetThreadParent(nsMsgKey inKey)
+{
+	if(mMsgHdr)
+		return mMsgHdr->SetThreadParent(inKey);
+	else
+		return NS_ERROR_FAILURE;
+}
+
+
+NS_IMETHODIMP nsMessage::GetMsgFolder(nsIMsgFolder **folder)
+{
+	if(!folder)
+		return NS_ERROR_NULL_POINTER;
+	*folder = mFolder;
+	if(mFolder)
+	{
+		NS_ADDREF(mFolder);
+		return NS_OK;
+	}
+	else
+		return NS_ERROR_NULL_POINTER;
+}
+
+
+NS_IMETHODIMP nsMessage::SetMsgFolder(nsIMsgFolder *folder)
+{
+	mFolder = folder;
+	//We don't want to own folder, so don't AddRef
+	return NS_OK;
+}
+
+
+NS_IMETHODIMP nsMessage::SetMsgDBHdr(nsIMsgDBHdr *hdr)
+{
+	mMsgHdr = dont_QueryInterface(hdr);
+	return NS_OK;
+}
+
+NS_IMETHODIMP nsMessage::GetMsgDBHdr(nsIMsgDBHdr **hdr)
+{
+	*hdr = mMsgHdr;
+	if(*hdr)
+	{
+		NS_ADDREF(*hdr);
+		return NS_OK;
+	}
+	else
+		return NS_ERROR_NULL_POINTER;
+}
+

mozilla/mailnews/base/util/nsMessage.h

@@ -0,0 +1,113 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+/********************************************************************************************************
+ 
+   Interface for representing Messenger folders.
+ 
+*********************************************************************************************************/
+
+#ifndef nsMessage_h__
+#define nsMessage_h__
+
+#include "msgCore.h"
+#include "nsIMessage.h" /* include the interface we are going to support */
+#include "nsRDFResource.h"
+#include "nsIMsgHdr.h"
+#include "nsCOMPtr.h"
+
+
+class NS_MSG_BASE nsMessage: public nsRDFResource, public nsIDBMessage
+{
+public: 
+	nsMessage(void);
+	virtual ~nsMessage(void);
+
+	NS_DECL_ISUPPORTS_INHERITED
+  NS_DECL_NSIMESSAGE
+  NS_DECL_NSIDBMESSAGE
+
+	NS_IMETHOD Init(const char *aURI);
+	//nsIMsgHdr
+	NS_IMETHOD GetProperty(const char *propertyName, nsString &resultProperty);
+    NS_IMETHOD SetProperty(const char *propertyName, nsString &propertyStr);
+    NS_IMETHOD GetUint32Property(const char *propertyName, PRUint32 *pResult);
+    NS_IMETHOD SetUint32Property(const char *propertyName, PRUint32 propertyVal);
+    NS_IMETHOD GetNumReferences(PRUint16 *result);
+    NS_IMETHOD GetStringReference(PRInt32 refNum, nsCString &resultReference);
+    NS_IMETHOD GetDate(PRTime *result);
+    NS_IMETHOD SetDate(PRTime date);
+    NS_IMETHOD SetMessageId(const char *messageId);
+    NS_IMETHOD SetReferences(const char *references);
+    NS_IMETHOD SetCCList(const char *ccList);
+    NS_IMETHOD SetRecipients(const char *recipients, PRBool recipientsIsNewsgroup);
+	NS_IMETHOD SetRecipientsArray(const char *names, const char *addresses, PRUint32 numAddresses);
+    NS_IMETHOD SetCCListArray(const char *names, const char *addresses, PRUint32 numAddresses);
+    NS_IMETHOD SetAuthor(const char *author);
+    NS_IMETHOD SetSubject(const char *subject);
+    NS_IMETHOD SetStatusOffset(PRUint32 statusOffset);
+
+	NS_IMETHOD GetAuthor(nsString *resultAuthor);
+	NS_IMETHOD GetSubject(nsString *resultSubject);
+	NS_IMETHOD GetRecipients(nsString *resultRecipients);
+	NS_IMETHOD GetCCList(nsString *ccList);
+	NS_IMETHOD GetMessageId(nsCString *resultMessageId);
+
+	NS_IMETHOD GetMime2DecodedAuthor(nsString *resultAuthor);
+	NS_IMETHOD GetMime2DecodedSubject(nsString *resultSubject);
+	NS_IMETHOD GetMime2DecodedRecipients(nsString *resultRecipients);
+
+	NS_IMETHOD GetAuthorCollationKey(nsString *resultAuthor);
+	NS_IMETHOD GetSubjectCollationKey(nsString *resultSubject);
+	NS_IMETHOD GetRecipientsCollationKey(nsString *resultRecipients);
+
+    // flag handling routines
+    NS_IMETHOD GetFlags(PRUint32 *result);
+    NS_IMETHOD SetFlags(PRUint32 flags);
+    NS_IMETHOD OrFlags(PRUint32 flags, PRUint32 *result);
+    NS_IMETHOD AndFlags(PRUint32 flags, PRUint32 *result);
+
+	// Mark message routines
+	NS_IMETHOD MarkRead(PRBool bRead);
+	NS_IMETHOD MarkFlagged(PRBool bFlagged);
+
+    NS_IMETHOD GetMessageKey(nsMsgKey *result);
+    NS_IMETHOD GetThreadId(nsMsgKey *result);
+    NS_IMETHOD SetThreadId(nsMsgKey inKey);
+    NS_IMETHOD SetMessageKey(nsMsgKey inKey);
+    NS_IMETHOD GetMessageSize(PRUint32 *result);
+    NS_IMETHOD SetMessageSize(PRUint32 messageSize);
+    NS_IMETHOD GetLineCount(PRUint32 *result);
+    NS_IMETHOD SetLineCount(PRUint32 lineCount);
+    NS_IMETHOD SetPriority(nsMsgPriority priority);
+    NS_IMETHOD SetPriority(const char *priority);
+    NS_IMETHOD GetMessageOffset(PRUint32 *result);
+    NS_IMETHOD GetStatusOffset(PRUint32 *result); 
+	NS_IMETHOD GetCharSet(nsString *result);
+    NS_IMETHOD GetPriority(nsMsgPriority *result);
+    NS_IMETHOD GetThreadParent(nsMsgKey *result);
+    NS_IMETHOD SetThreadParent(nsMsgKey inKey);
+
+protected:
+	nsIMsgFolder *mFolder;
+	nsCOMPtr<nsIMsgDBHdr> mMsgHdr;
+
+};
+
+#endif //nsMessage_h__
+

mozilla/mailnews/base/util/nsMsgDBFolder.cpp

@@ -0,0 +1,530 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "msgCore.h"
+#include "nsIMessage.h"
+#include "nsMsgDBFolder.h"
+#include "nsMsgFolderFlags.h"
+#include "nsIPref.h"
+#include "nsIMsgFolderCache.h"
+#include "nsIMsgFolderCacheElement.h"
+#include "nsIMsgMailSession.h"
+#include "nsMsgBaseCID.h"
+#include "nsIMsgMailNewsUrl.h"
+
+static NS_DEFINE_CID(kPrefServiceCID, NS_PREF_CID);
+static NS_DEFINE_CID(kMsgMailSessionCID, NS_MSGMAILSESSION_CID);
+
+NS_IMPL_ADDREF_INHERITED(nsMsgDBFolder, nsMsgFolder)
+NS_IMPL_RELEASE_INHERITED(nsMsgDBFolder, nsMsgFolder)
+
+NS_IMETHODIMP nsMsgDBFolder::QueryInterface(REFNSIID aIID, void** aInstancePtr)
+{
+	if (!aInstancePtr) return NS_ERROR_NULL_POINTER;
+	*aInstancePtr = nsnull;
+	if (aIID.Equals(nsCOMTypeInfo<nsIDBChangeListener>::GetIID()))
+	{
+		*aInstancePtr = NS_STATIC_CAST(nsIDBChangeListener*, this);
+	}              
+	else if (aIID.Equals(nsCOMTypeInfo<nsIUrlListener>::GetIID()))
+	{
+		*aInstancePtr = NS_STATIC_CAST(nsIUrlListener*, this);
+	}              
+
+	if(*aInstancePtr)
+	{
+		AddRef();
+		return NS_OK;
+	}
+
+	return nsRDFResource::QueryInterface(aIID, aInstancePtr);
+}
+
+nsMsgDBFolder::nsMsgDBFolder(void)
+: mCharset(""), mAddListener(PR_TRUE)
+{
+
+}
+
+nsMsgDBFolder::~nsMsgDBFolder(void)
+{
+	if(mDatabase)
+	{
+		mDatabase->RemoveListener(this);
+		mDatabase->Close(PR_TRUE);
+	}
+}
+
+NS_IMETHODIMP nsMsgDBFolder::StartFolderLoading(void)
+{
+	if(mDatabase)
+		mDatabase->RemoveListener(this);
+	mAddListener = PR_FALSE;
+	return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgDBFolder::EndFolderLoading(void)
+{
+	if(mDatabase)
+		mDatabase->AddListener(this);
+	mAddListener = PR_TRUE;
+	return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgDBFolder::GetThreads(nsISimpleEnumerator** threadEnumerator)
+{
+	nsresult rv = GetDatabase();
+	
+	if(NS_SUCCEEDED(rv))
+		return mDatabase->EnumerateThreads(threadEnumerator);
+	else
+		return rv;
+}
+
+NS_IMETHODIMP
+nsMsgDBFolder::GetThreadForMessage(nsIMessage *message, nsIMsgThread **thread)
+{
+	nsresult rv = GetDatabase();
+	if(NS_SUCCEEDED(rv))
+	{
+		nsCOMPtr<nsIMsgDBHdr> msgDBHdr;
+		nsCOMPtr<nsIDBMessage> dbMessage(do_QueryInterface(message, &rv));
+		if(NS_SUCCEEDED(rv))
+			rv = dbMessage->GetMsgDBHdr(getter_AddRefs(msgDBHdr));
+		if(NS_SUCCEEDED(rv))
+		{
+			rv = mDatabase->GetThreadContainingMsgHdr(msgDBHdr, thread);
+		}
+	}
+	return rv;
+
+}
+
+NS_IMETHODIMP
+nsMsgDBFolder::HasMessage(nsIMessage *message, PRBool *hasMessage)
+{
+	if(!hasMessage)
+		return NS_ERROR_NULL_POINTER;
+
+	nsresult rv = GetDatabase();
+
+	if(NS_SUCCEEDED(rv))
+	{
+		nsCOMPtr<nsIMsgDBHdr> msgDBHdr, msgDBHdrForKey;
+		nsCOMPtr<nsIDBMessage> dbMessage(do_QueryInterface(message, &rv));
+		nsMsgKey key;
+		if(NS_SUCCEEDED(rv))
+			rv = dbMessage->GetMsgDBHdr(getter_AddRefs(msgDBHdr));
+		if(NS_SUCCEEDED(rv))
+			rv = msgDBHdr->GetMessageKey(&key);
+		if(NS_SUCCEEDED(rv))
+			rv = mDatabase->ContainsKey(key, hasMessage);
+		
+	}
+	return rv;
+
+}
+
+NS_IMETHODIMP nsMsgDBFolder::GetCharset(PRUnichar * *aCharset)
+{
+	nsresult rv = NS_OK;
+	if(!aCharset)
+		return NS_ERROR_NULL_POINTER;
+
+	if(mCharset == "")
+	{
+		NS_WITH_SERVICE(nsIPref, prefs, kPrefServiceCID, &rv);
+
+		char *prefCharset = nsnull;
+		if (NS_SUCCEEDED(rv))
+		{
+			rv = prefs->CopyCharPref("intl.character_set_name", &prefCharset);
+		}
+  
+		nsString prefCharsetStr;
+		if(prefCharset)
+		{
+			prefCharsetStr = prefCharset;
+			PR_Free(prefCharset);
+		}
+		else
+		{
+			prefCharsetStr = "us-ascii";
+		}
+		*aCharset = prefCharsetStr.ToNewUnicode();
+	}
+	else
+	{
+		*aCharset = mCharset.ToNewUnicode();
+	}
+	return rv;
+}
+
+NS_IMETHODIMP nsMsgDBFolder::SetCharset(const PRUnichar * aCharset)
+{
+	nsresult rv;
+
+	nsCOMPtr<nsIDBFolderInfo> folderInfo;
+	nsCOMPtr<nsIMsgDatabase> db; 
+	rv = GetDBFolderInfoAndDB(getter_AddRefs(folderInfo), getter_AddRefs(db));
+	if(NS_SUCCEEDED(rv))
+	{
+		nsString charset(aCharset);
+		rv = folderInfo->SetCharacterSet(&charset);
+		db->Commit(nsMsgDBCommitType::kLargeCommit);
+	}
+	return rv;
+}
+
+nsresult nsMsgDBFolder::ReadDBFolderInfo(PRBool force)
+{
+	// Since it turns out to be pretty expensive to open and close
+	// the DBs all the time, if we have to open it once, get everything
+	// we might need while we're here
+
+	nsresult result;
+
+	nsCOMPtr <nsIMsgFolderCache> folderCache;
+
+	NS_WITH_SERVICE(nsIMsgMailSession, mailSession, kMsgMailSessionCID, &result); 
+	if(NS_SUCCEEDED(result))
+	{
+		result = mailSession->GetFolderCache(getter_AddRefs(folderCache));
+		if (NS_SUCCEEDED(result) && folderCache)
+		{
+			char *uri;
+
+			result = GetURI(&uri);
+			if (NS_SUCCEEDED(result) && uri)
+			{
+				nsCOMPtr <nsIMsgFolderCacheElement> cacheElement;
+				result = folderCache->GetCacheElement(uri, PR_FALSE, getter_AddRefs(cacheElement));
+				if (NS_SUCCEEDED(result) && cacheElement)
+				{
+					result = ReadFromFolderCache(cacheElement);
+				}
+				PR_Free(uri);
+			}
+
+		}
+	}
+//	if (m_master->InitFolderFromCache (this))
+//		return err;
+
+	if (force || !(mPrefFlags & MSG_FOLDER_PREF_CACHED))
+    {
+        nsCOMPtr<nsIDBFolderInfo> folderInfo;
+        nsCOMPtr<nsIMsgDatabase> db; 
+        result = GetDBFolderInfoAndDB(getter_AddRefs(folderInfo), getter_AddRefs(db));
+        if(NS_SUCCEEDED(result))
+        {
+			mIsCachable = PR_TRUE;
+            if (folderInfo)
+            {
+
+	            folderInfo->GetFlags(&mPrefFlags);
+                mPrefFlags |= MSG_FOLDER_PREF_CACHED;
+                folderInfo->SetFlags(mPrefFlags);
+
+				folderInfo->GetNumMessages(&mNumTotalMessages);
+				folderInfo->GetNumNewMessages(&mNumUnreadMessages);
+
+				//These should be put in IMAP folder only.
+				//folderInfo->GetImapTotalPendingMessages(&mNumPendingTotalMessages);
+				//folderInfo->GetImapUnreadPendingMessages(&mNumPendingUnreadMessages);
+
+				folderInfo->GetCharacterSet(&mCharset);
+        
+				if (db) {
+					PRBool hasnew;
+					nsresult rv;
+					rv = db->HasNew(&hasnew);
+					if (NS_FAILED(rv)) return rv;
+					if (!hasnew && mNumPendingUnreadMessages <= 0) {
+						ClearFlag(MSG_FOLDER_FLAG_GOT_NEW);
+					}
+				}
+            }
+
+        }
+        if (db)
+	        db->Close(PR_FALSE);
+    }
+
+	return result;
+	
+}
+
+nsresult nsMsgDBFolder::SendFlagNotifications(nsISupports *item, PRUint32 oldFlags, PRUint32 newFlags)
+{
+	nsresult rv = NS_OK;
+
+	PRUint32 changedFlags = oldFlags ^ newFlags;
+	if((changedFlags & MSG_FLAG_READ) || (changedFlags & MSG_FLAG_REPLIED)
+		|| (changedFlags & MSG_FLAG_FORWARDED)|| (changedFlags & MSG_FLAG_NEW))
+	{
+		rv = NotifyPropertyFlagChanged(item, "Status", oldFlags, newFlags);
+	}
+	else if((changedFlags & MSG_FLAG_MARKED))
+	{
+		rv = NotifyPropertyFlagChanged(item, "Flagged", oldFlags, newFlags);
+	}
+		return rv;
+}
+
+NS_IMETHODIMP
+nsMsgDBFolder::GetMsgDatabase(nsIMsgDatabase** aMsgDatabase)
+{
+    if (!aMsgDatabase || !mDatabase)
+        return NS_ERROR_NULL_POINTER;
+    *aMsgDatabase = mDatabase;
+    NS_ADDREF(*aMsgDatabase);
+    return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgDBFolder::OnKeyChange(nsMsgKey aKeyChanged, PRUint32 aOldFlags, PRUint32 aNewFlags, 
+                         nsIDBChangeListener * aInstigator)
+{
+	nsCOMPtr<nsIMsgDBHdr> pMsgDBHdr;
+	nsresult rv = mDatabase->GetMsgHdrForKey(aKeyChanged, getter_AddRefs(pMsgDBHdr));
+	if(NS_SUCCEEDED(rv) && pMsgDBHdr)
+	{
+		nsCOMPtr<nsIMessage> message;
+		rv = CreateMessageFromMsgDBHdr(pMsgDBHdr, getter_AddRefs(message));
+		if(NS_SUCCEEDED(rv))
+		{
+			nsCOMPtr<nsISupports> msgSupports(do_QueryInterface(message, &rv));
+			if(NS_SUCCEEDED(rv))
+			{
+				SendFlagNotifications(msgSupports, aOldFlags, aNewFlags);
+			}
+			UpdateSummaryTotals(PR_TRUE);
+		}
+	}
+	return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgDBFolder::OnKeyDeleted(nsMsgKey aKeyChanged, nsMsgKey  aParentKey, PRInt32 aFlags, 
+                          nsIDBChangeListener * aInstigator)
+{
+	nsCOMPtr<nsIMsgDBHdr> pMsgDBHdr;
+	nsresult rv = mDatabase->GetMsgHdrForKey(aKeyChanged, getter_AddRefs(pMsgDBHdr));
+	if(NS_SUCCEEDED(rv) && pMsgDBHdr)
+	{
+		nsCOMPtr<nsIMessage> message;
+		rv = CreateMessageFromMsgDBHdr(pMsgDBHdr, getter_AddRefs(message));
+		if(NS_SUCCEEDED(rv))
+		{
+			nsCOMPtr<nsISupports> msgSupports(do_QueryInterface(message, &rv));
+			if(NS_SUCCEEDED(rv))
+			{
+				NotifyItemDeleted(msgSupports);
+			}
+			UpdateSummaryTotals(PR_TRUE);
+		}
+	}
+
+	return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgDBFolder::OnKeyAdded(nsMsgKey aKeyChanged, nsMsgKey  aParentKey , PRInt32 aFlags, 
+                        nsIDBChangeListener * aInstigator)
+{
+	nsresult rv;
+	nsCOMPtr<nsIMsgDBHdr> msgDBHdr;
+	rv = mDatabase->GetMsgHdrForKey(aKeyChanged, getter_AddRefs(msgDBHdr));
+	if(NS_SUCCEEDED(rv) && msgDBHdr)
+	{
+		nsCOMPtr<nsIMessage> message;
+		rv = CreateMessageFromMsgDBHdr(msgDBHdr, getter_AddRefs(message));
+		if(NS_SUCCEEDED(rv))
+		{
+			nsCOMPtr<nsISupports> msgSupports(do_QueryInterface(message));
+			if(msgSupports)
+			{
+				NotifyItemAdded(msgSupports);
+			}
+			UpdateSummaryTotals(PR_TRUE);
+		}
+	}
+	return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgDBFolder::OnParentChanged(nsMsgKey aKeyChanged, nsMsgKey oldParent, nsMsgKey newParent, 
+						nsIDBChangeListener * aInstigator)
+{
+	return NS_OK;
+}
+
+
+NS_IMETHODIMP nsMsgDBFolder::OnAnnouncerGoingAway(nsIDBChangeAnnouncer *
+													 instigator)
+{
+    if (mDatabase)
+    {
+        mDatabase->RemoveListener(this);
+        mDatabase = null_nsCOMPtr();
+    }
+    return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgDBFolder::ManyHeadersToDownload(PRBool *retval)
+{
+	PRInt32 numTotalMessages;
+
+	if (!retval)
+		return NS_ERROR_NULL_POINTER;
+	if (!mDatabase)
+		*retval = PR_TRUE;
+	else if (NS_SUCCEEDED(GetTotalMessages(PR_FALSE, &numTotalMessages)) && numTotalMessages <= 0)
+		*retval = PR_TRUE;
+	else
+		*retval = PR_FALSE;
+	return NS_OK;
+}
+
+
+nsresult nsMsgDBFolder::ReadFromFolderCache(nsIMsgFolderCacheElement *element)
+{
+	nsresult rv = NS_OK;
+	char *charset;
+
+	element->GetInt32Property("flags", &mPrefFlags);
+	element->GetInt32Property("totalMsgs", &mNumTotalMessages);
+	element->GetInt32Property("totalUnreadMsgs", &mNumUnreadMessages);
+
+	element->GetStringProperty("charset", &charset);
+
+#ifdef DEBUG_bienvenu1
+	char *uri;
+
+	GetURI(&uri);
+	printf("read total %ld for %s\n", mNumTotalMessages, uri);
+	PR_Free(uri);
+#endif
+	mCharset = charset;
+	PR_FREEIF(charset);
+
+    mPrefFlags |= MSG_FOLDER_PREF_CACHED;
+	return rv;
+}
+
+NS_IMETHODIMP nsMsgDBFolder::WriteToFolderCache(nsIMsgFolderCache *folderCache)
+{
+	nsCOMPtr <nsIEnumerator> aEnumerator;
+
+	nsresult rv = GetSubFolders(getter_AddRefs(aEnumerator));
+	if(NS_FAILED(rv)) 
+		return rv;
+
+	char *uri = nsnull;
+	rv = GetURI(&uri);
+
+	if (folderCache)
+	{
+		nsCOMPtr <nsIMsgFolderCacheElement> cacheElement;
+		rv = folderCache->GetCacheElement(uri, PR_TRUE, getter_AddRefs(cacheElement));
+		if (NS_SUCCEEDED(rv) && cacheElement)
+			rv = WriteToFolderCacheElem(cacheElement);
+	}
+	PR_FREEIF(uri);
+
+	
+	nsCOMPtr<nsISupports> aItem;
+
+	rv = aEnumerator->First();
+	if (!NS_SUCCEEDED(rv))
+		return NS_OK;	// it's OK, there are no sub-folders.
+
+	while(NS_SUCCEEDED(rv))
+	{
+		rv = aEnumerator->CurrentItem(getter_AddRefs(aItem));
+		if (NS_FAILED(rv)) break;
+		nsCOMPtr<nsIMsgFolder> aMsgFolder(do_QueryInterface(aItem, &rv));
+		if (NS_SUCCEEDED(rv))
+		{
+			if (folderCache)
+			{
+				rv = aMsgFolder->WriteToFolderCache(folderCache);
+				if (!NS_SUCCEEDED(rv))
+					break;
+			}
+		}
+		rv = aEnumerator->Next();
+		if (!NS_SUCCEEDED(rv))
+		{
+			rv = NS_OK;
+			break;
+		}
+	}
+	return rv;
+}
+
+NS_IMETHODIMP nsMsgDBFolder::WriteToFolderCacheElem(nsIMsgFolderCacheElement *element)
+{
+	nsresult rv = NS_OK;
+
+	element->SetInt32Property("flags", mPrefFlags);
+	element->SetInt32Property("totalMsgs", mNumTotalMessages);
+	element->SetInt32Property("totalUnreadMsgs", mNumUnreadMessages);
+
+	element->SetStringProperty("charset", (const char *) nsCAutoString(mCharset));
+
+#ifdef DEBUG_bienvenu1
+	char *uri;
+
+	GetURI(&uri);
+	printf("writing total %ld for %s\n", mNumTotalMessages, uri);
+	PR_Free(uri);
+#endif
+	return rv;
+}
+
+NS_IMETHODIMP
+nsMsgDBFolder::MarkAllMessagesRead(void)
+{
+	nsresult rv = GetDatabase();
+	
+	if(NS_SUCCEEDED(rv))
+		return mDatabase->MarkAllRead(nsnull);
+
+	return rv;
+}
+
+NS_IMETHODIMP
+nsMsgDBFolder::OnStartRunningUrl(nsIURI *aUrl)
+{
+	NS_PRECONDITION(aUrl, "just a sanity check");
+    return NS_OK;
+}
+
+NS_IMETHODIMP
+nsMsgDBFolder::OnStopRunningUrl(nsIURI *aUrl, nsresult aExitCode)
+{
+	NS_PRECONDITION(aUrl, "just a sanity check");
+	nsCOMPtr<nsIMsgMailNewsUrl> mailUrl = do_QueryInterface(aUrl);
+	if (mailUrl)
+	{
+		PRBool updatingFolder = PR_FALSE;
+		if (NS_SUCCEEDED(mailUrl->GetUpdatingFolder(&updatingFolder)) && updatingFolder)
+		{
+			NotifyFolderLoaded();
+		}
+	}
+    return NS_OK;
+}

mozilla/mailnews/base/util/nsMsgDBFolder.h

@@ -0,0 +1,80 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#ifndef nsMsgDBFolder_h__
+#define nsMsgDBFolder_h__
+
+#include "msgCore.h"
+#include "nsMsgFolder.h" 
+#include "nsIDBFolderInfo.h"
+#include "nsIMsgDatabase.h"
+#include "nsIMessage.h"
+#include "nsCOMPtr.h"
+#include "nsIDBChangeListener.h"
+#include "nsIUrlListener.h"
+
+class nsIMsgFolderCacheElement;
+ /* 
+  * nsMsgDBFolder
+  * class derived from nsMsgFolder for those folders that use an nsIMsgDatabase
+  */ 
+
+class NS_MSG_BASE nsMsgDBFolder:  public nsMsgFolder,
+                                        public nsIDBChangeListener,
+                                        public nsIUrlListener
+{
+public: 
+	nsMsgDBFolder(void);
+	virtual ~nsMsgDBFolder(void);
+  NS_DECL_NSIDBCHANGELISTENER
+  
+	NS_IMETHOD  StartFolderLoading(void);
+	NS_IMETHOD  EndFolderLoading(void);
+	NS_IMETHOD GetThreads(nsISimpleEnumerator** threadEnumerator);
+	NS_IMETHOD GetThreadForMessage(nsIMessage *message, nsIMsgThread **thread);
+	NS_IMETHOD HasMessage(nsIMessage *message, PRBool *hasMessage);
+	NS_IMETHOD GetCharset(PRUnichar * *aCharset);
+	NS_IMETHOD SetCharset(const PRUnichar * aCharset);
+
+  NS_IMETHOD GetMsgDatabase(nsIMsgDatabase** aMsgDatabase);
+
+	NS_DECL_ISUPPORTS_INHERITED
+
+	NS_DECL_NSIURLLISTENER
+
+	NS_IMETHOD WriteToFolderCache(nsIMsgFolderCache *folderCache);
+	NS_IMETHOD WriteToFolderCacheElem(nsIMsgFolderCacheElement *element);
+	NS_IMETHOD ManyHeadersToDownload(PRBool *_retval);
+
+	NS_IMETHOD MarkAllMessagesRead(void);
+
+protected:
+	virtual nsresult ReadDBFolderInfo(PRBool force);
+	virtual nsresult GetDatabase() = 0;
+	virtual nsresult SendFlagNotifications(nsISupports *item, PRUint32 oldFlags, PRUint32 newFlags);
+	nsresult ReadFromFolderCache(nsIMsgFolderCacheElement *element);
+
+protected:
+	nsCOMPtr<nsIMsgDatabase> mDatabase;  
+	nsString mCharset;
+	PRBool mAddListener;
+
+
+};
+
+#endif

mozilla/mailnews/base/util/nsMsgFolder.h

@@ -0,0 +1,268 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+/********************************************************************************************************
+ 
+   Interface for representing Messenger folders.
+ 
+*********************************************************************************************************/
+
+#ifndef nsMsgFolder_h__
+#define nsMsgFolder_h__
+
+#include "msgCore.h"
+#include "nsIMsgFolder.h" /* include the interface we are going to support */
+#include "nsRDFResource.h"
+#include "nsIDBFolderInfo.h"
+#include "nsIMsgDatabase.h"
+#include "nsIMsgIncomingServer.h"
+#include "nsCOMPtr.h"
+#include "nsIURL.h"
+ /* 
+  * MsgFolder
+  */ 
+
+class NS_MSG_BASE nsMsgFolder: public nsRDFResource, public nsIMsgFolder
+{
+public: 
+  nsMsgFolder(void);
+  virtual ~nsMsgFolder(void);
+
+  NS_DECL_ISUPPORTS_INHERITED
+
+  NS_DECL_NSICOLLECTION
+  NS_DECL_NSIFOLDER
+  // eventually this will be an instantiable class, and we should
+  // use this macro:
+  // NS_DECL_NSIMSGFOLDER
+  
+  // right now a few of these methods are left abstract, and
+  // are commented out below
+  
+  // begin NS_DECL_NSIMSGFOLDER
+  NS_IMETHOD AddUnique(nsISupports *element);
+  NS_IMETHOD ReplaceElement(nsISupports *element, nsISupports *newElement);
+  NS_IMETHOD GetMessages(nsISimpleEnumerator **_retval);
+  NS_IMETHOD GetThreads(nsISimpleEnumerator **_retval);
+  NS_IMETHOD StartFolderLoading(void);
+  NS_IMETHOD EndFolderLoading(void);
+  NS_IMETHOD UpdateFolder(void);
+  NS_IMETHOD GetThreadForMessage(nsIMessage *message, nsIMsgThread **_retval);
+  NS_IMETHOD HasMessage(nsIMessage *message, PRBool *_retval);
+  NS_IMETHOD GetVisibleSubFolders(nsIEnumerator **_retval);
+  NS_IMETHOD GetPrettiestName(PRUnichar * *aPrettiestName);
+  NS_IMETHOD GetFolderURL(char * *aFolderURL);
+  NS_IMETHOD GetDeleteIsMoveToTrash(PRBool *aDeleteIsMoveToTrash);
+  NS_IMETHOD GetShowDeletedMessages(PRBool *aShowDeletedMessages);
+  NS_IMETHOD GetServer(nsIMsgIncomingServer * *aServer);
+  NS_IMETHOD GetIsServer(PRBool *aIsServer);
+  NS_IMETHOD OnCloseFolder(void);
+  NS_IMETHOD Delete(void);
+  NS_IMETHOD DeleteSubFolders(nsISupportsArray *folders);
+  NS_IMETHOD PropagateDelete(nsIMsgFolder *folder, PRBool deleteStorage);
+  NS_IMETHOD RecursiveDelete(PRBool deleteStorage);
+  NS_IMETHOD CreateSubfolder(const char *folderName);
+  NS_IMETHOD Compact(void);
+  NS_IMETHOD EmptyTrash(void);
+  NS_IMETHOD Rename(const char *name);
+  NS_IMETHOD Adopt(nsIMsgFolder *srcFolder, PRUint32 *outPos);
+  NS_IMETHOD ContainsChildNamed(const char *name, PRBool *_retval);
+  NS_IMETHOD IsAncestorOf(nsIMsgFolder *folder, PRBool *_retval);
+  NS_IMETHOD GenerateUniqueSubfolderName(const char *prefix, nsIMsgFolder *otherFolder, char **_retval); 
+  NS_IMETHOD UpdateSummaryTotals(PRBool force);
+  NS_IMETHOD SummaryChanged(void);
+  NS_IMETHOD GetNumUnread(PRBool deep, PRInt32 *_retval);
+  NS_IMETHOD GetTotalMessages(PRBool deep, PRInt32 *_retval);
+  NS_IMETHOD GetExpungedBytesCount(PRUint32 *aExpungedBytesCount);
+  NS_IMETHOD GetDeletable(PRBool *aDeletable);
+  NS_IMETHOD GetCanCreateChildren(PRBool *aCanCreateChildren);
+  NS_IMETHOD GetCanBeRenamed(PRBool *aCanBeRenamed);
+  NS_IMETHOD GetRequiresCleanup(PRBool *aRequiresCleanup);
+  NS_IMETHOD ClearRequiresCleanup(void);
+  NS_IMETHOD ManyHeadersToDownload(PRBool *_retval);
+  NS_IMETHOD GetKnowsSearchNntpExtension(PRBool *aKnowsSearchNntpExtension);
+  NS_IMETHOD GetAllowsPosting(PRBool *aAllowsPosting);
+  NS_IMETHOD GetDisplayRecipients(PRBool *aDisplayRecipients);
+   NS_IMETHOD GetRelativePathName(char * *aRelativePathName);
+  NS_IMETHOD GetSizeOnDisk(PRUint32 *aSizeOnDisk);
+  NS_IMETHOD RememberPassword(const char *password);
+  NS_IMETHOD GetRememberedPassword(char * *aRememberedPassword);
+  NS_IMETHOD UserNeedsToAuthenticateForFolder(PRBool displayOnly, PRBool *_retval);
+  NS_IMETHOD GetUsername(char * *aUsername);
+  NS_IMETHOD GetHostname(char * *aHostname);
+  NS_IMETHOD SetFlag(PRUint32 flag);
+  NS_IMETHOD ClearFlag(PRUint32 flag);
+  NS_IMETHOD GetFlag(PRUint32 flag, PRBool *_retval);
+  NS_IMETHOD ToggleFlag(PRUint32 flag);
+  NS_IMETHOD OnFlagChange(PRUint32 flag);
+  NS_IMETHOD GetFlags(PRUint32 *aFlags);
+  NS_IMETHOD GetFoldersWithFlag(PRUint32 flags, nsIMsgFolder **result, PRUint32 resultsize, PRUint32 *numFolders);
+  NS_IMETHOD GetExpansionArray(nsISupportsArray *expansionArray);
+  // NS_IMETHOD DeleteMessages(nsISupportsArray *message, nsITransactionManager *txnMgr, PRBool deleteStorage);
+  NS_IMETHOD CopyMessages(nsIMsgFolder *srcFolder, nsISupportsArray *messages, PRBool isMove, nsITransactionManager *txnMgr, nsIMsgCopyServiceListener *listener);
+  NS_IMETHOD CopyFileMessage(nsIFileSpec *fileSpec, nsIMessage *msgToReplace, PRBool isDraft, nsITransactionManager *txnMgr, nsIMsgCopyServiceListener *listener);
+  NS_IMETHOD AcquireSemaphore(nsISupports *semHolder);
+  NS_IMETHOD ReleaseSemaphore(nsISupports *semHolder);
+  NS_IMETHOD TestSemaphore(nsISupports *semHolder, PRBool *_retval);
+  NS_IMETHOD GetLocked(PRBool *aLocked);
+  // NS_IMETHOD CreateMessageFromMsgDBHdr(nsIMsgDBHdr *msgDBHdr, nsIMessage **_retval);
+  NS_IMETHOD GetNewMessages(void);
+  // NS_IMETHOD WriteToFolderCache(nsIMsgFolderCache *folderCache);
+  // NS_IMETHOD GetCharset(PRUnichar * *aCharset);
+  // NS_IMETHOD SetCharset(const PRUnichar * aCharset);
+  NS_IMETHOD GetBiffState(PRUint32 *aBiffState);
+  NS_IMETHOD SetBiffState(PRUint32 aBiffState);
+  NS_IMETHOD GetNumNewMessages(PRInt32 *aNumNewMessages);
+  NS_IMETHOD SetNumNewMessages(PRInt32 aNumNewMessages);
+  NS_IMETHOD GetNewMessagesNotificationDescription(PRUnichar * *aNewMessagesNotificationDescription);
+  NS_IMETHOD GetRootFolder(nsIMsgFolder * *aRootFolder);
+  NS_IMETHOD GetMsgDatabase(nsIMsgDatabase * *aMsgDatabase);
+  NS_IMETHOD GetPath(nsIFileSpec * *aPath);
+  NS_IMETHOD MarkMessagesRead(nsISupportsArray *messages, PRBool markRead);
+  NS_IMETHOD MarkAllMessagesRead(void);
+  NS_IMETHOD MarkMessagesFlagged(nsISupportsArray *messages, PRBool markFlagged);
+  NS_IMETHOD GetChildWithURI(const char *uri, PRBool deep, nsIMsgFolder **_retval); 
+
+  // end NS_DECL_NSIMSGFOLDER
+  
+  // nsRDFResource overrides
+  NS_IMETHOD Init(const char* aURI);
+  
+#if 0
+  static nsresult GetRoot(nsIMsgFolder* *result);
+#endif
+  // Gets the URL that represents the given message.  Returns a newly
+  // created string that must be free'd using XP_FREE().
+  // If the db is NULL, then returns a URL that represents the entire
+  // folder as a whole.
+#ifdef HAVE_DB
+  NS_IMETHOD BuildUrl(nsMsgDatabase *db, nsMsgKey key, char ** url);
+  
+  // updates num messages and num unread - should be pure virtual
+  // when I get around to implementing in all subclasses?
+  NS_IMETHOD GetTotalMessagesInDB(PRUint32 *totalMessages) const;					// How many messages in database.
+	// These functions are used for tricking the front end into thinking that we have more 
+	// messages than are really in the DB.  This is usually after and IMAP message copy where
+	// we don't want to do an expensive select until the user actually opens that folder
+	// These functions are called when MSG_Master::GetFolderLineById is populating a MSG_FolderLine
+	// struct used by the FE
+	int32			GetNumPendingUnread(PRBool deep = PR_FALSE);
+	int32			GetNumPendingTotalMessages(PRBool deep = PR_FALSE);
+	
+  void			ChangeNumPendingUnread(int32 delta);
+  void			ChangeNumPendingTotalMessages(int32 delta);
+
+
+  NS_IMETHOD SetFolderPrefFlags(PRUint32 flags);
+  NS_IMETHOD GetFolderPrefFlags(PRUint32 *flags);
+
+
+  NS_IMETHOD SetLastMessageLoaded(nsMsgKey lastMessageLoaded);
+  NS_IMETHOD GetLastMessageLoaded();
+#endif
+
+
+#ifdef HAVE_ADMINURL
+  NS_IMETHOD GetAdminUrl(MWContext *context, MSG_AdminURLType type);
+  NS_IMETHOD HaveAdminUrl(MSG_AdminURLType type, PRBool *hadAdminUrl);
+#endif
+
+
+#ifdef HAVE_PANE
+  NS_IMETHOD	MarkAllRead(MSG_Pane *pane, PRBool deep);
+  NS_IMETHOD SetFlagInAllFolderPanes(PRUint32 which);
+#endif
+
+#ifdef HAVE_NET
+  NS_IMETHOD EscapeMessageId(const char *messageId, const char **escapeMessageID);
+  NS_IMETHOD ShouldPerformOperationOffline(PRBool *performOffline);
+#endif
+
+#ifdef HAVE_CACHE
+	virtual nsresult WriteToCache(XP_File);
+	virtual nsresult ReadFromCache(char *);
+	virtual PRBool IsCachable();
+	void SkipCacheTokens(char **ppBuf, int numTokens);
+#endif
+
+#ifdef DOES_FOLDEROPERATIONS
+	int DownloadToTempFileAndUpload(MessageCopyInfo *copyInfo, nsMsgKeyArray &keysToSave, MSG_FolderInfo *dstFolder, nsMsgDatabase *sourceDB);
+	void UpdateMoveCopyStatus(MWContext *context, PRBool isMove, int32 curMsgCount, int32 totMessages);
+#endif
+
+	virtual nsresult GetDBFolderInfoAndDB(nsIDBFolderInfo **folderInfo, nsIMsgDatabase **db) = 0;
+
+
+	NS_IMETHOD MatchName(nsString *name, PRBool *matches);
+
+
+protected:
+	nsresult NotifyPropertyChanged(char *property, char* oldValue, char* newValue);
+	nsresult NotifyPropertyFlagChanged(nsISupports *item, char *property, PRUint32 oldValue,
+												PRUint32 newValue);
+	nsresult NotifyItemAdded(nsISupports *item);
+	nsresult NotifyItemDeleted(nsISupports *item);
+
+	nsresult NotifyFolderLoaded();
+	// this is a little helper function that is not part of the public interface. 
+	// we use it to get the IID of the incoming server for the derived folder.
+	// w/out a function like this we would have to implement GetServer in each
+	// derived folder class.
+	virtual const char* GetIncomingServerType() = 0;
+
+protected:
+  PRUint32 mFlags;
+  nsIFolder *mParent;     //This won't be refcounted for ownership reasons.
+  PRInt32 mNumUnreadMessages;        /* count of unread messages (-1 means
+                                         unknown; -2 means unknown but we already
+                                         tried to find out.) */
+  PRInt32 mNumTotalMessages;         /* count of existing messages. */
+  nsCOMPtr<nsISupportsArray> mSubFolders;
+  nsVoidArray *mListeners; //This can't be an nsISupportsArray because due to
+													 //ownership issues, listeners can't be AddRef'd
+
+  PRInt32 mPrefFlags;       // prefs like MSG_PREF_OFFLINE, MSG_PREF_ONE_PANE, etc
+  nsISupports *mSemaphoreHolder; // set when the folder is being written to
+								//Due to ownership issues, this won't be AddRef'd.
+
+  nsIMsgIncomingServer* m_server; //this won't be addrefed....ownership issue here
+
+#ifdef HAVE_DB
+  nsMsgKey	m_lastMessageLoaded;
+#endif
+  // These values are used for tricking the front end into thinking that we have more 
+  // messages than are really in the DB.  This is usually after and IMAP message copy where
+  // we don't want to do an expensive select until the user actually opens that folder
+  PRInt32 mNumPendingUnreadMessages;
+  PRInt32 mNumPendingTotalMessages;
+
+  PRUint32	mBiffState;
+  PRInt32	mNumNewBiffMessages;
+
+  PRBool mIsCachable;
+
+  //
+  // stuff from the uri
+  //
+  
+  PRBool mIsServer;
+  nsString mName;
+  
+};
+
+#endif

mozilla/mailnews/base/util/nsMsgGroupRecord.cpp

@@ -0,0 +1,598 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "msgCore.h"    // precompiled header...
+#include "prlog.h"
+
+#include "nsMsgGroupRecord.h"
+
+#include "plstr.h"
+#include "prmem.h"
+#include "nsEscape.h"
+#include "nsCRT.h"
+
+// mscott: this is lame...I know....
+#define MK_OUT_OF_MEMORY  1
+
+const PRUint32 F_ISGROUP			 = 0x00000001;
+const PRUint32 F_EXPANDED			 = 0x00000002;
+const PRUint32 F_CATCONT			 = 0x00000004;
+const PRUint32 F_VIRTUAL			 = 0x00000008;
+const PRUint32 F_DIRTY			 = 0x00000010;
+const PRUint32 F_DESCENDENTSLOADED = 0x00000020;
+const PRUint32 F_HTMLOKGROUP		 = 0x00000040;
+const PRUint32 F_HTMLOKTREE		 = 0x00000080;
+const PRUint32 F_NEEDEXTRAINFO	 = 0x00000100;
+const PRUint32 F_DOESNOTEXIST		 = 0x00000200;
+const PRUint32 RUNTIMEFLAGS =		// Flags to be sure *not* to write to disk.
+	F_DIRTY | F_DESCENDENTSLOADED | F_EXPANDED;
+
+
+
+int
+nsMsgGroupRecord::GroupNameCompare(const char* name1, const char* name2,
+								  char delimiter, PRBool caseInsensitive)
+{
+	if (caseInsensitive)
+	{
+		while (*name1 && (nsCRT::ToUpper(*name1) == nsCRT::ToUpper(*name2))) {
+			name1++;
+			name2++;
+		}		
+	}
+	else
+	{
+		while (*name1 && *name1 == *name2) {
+			name1++;
+			name2++;
+		}
+	}
+
+	if (*name1 && *name2) {
+		if (*name1 == delimiter) return -1;
+		if (*name2 == delimiter) return 1;
+	}
+
+	if (caseInsensitive)
+		return int(nsCRT::ToUpper(*name1)) - int(nsCRT::ToUpper(*name2));
+	else
+		return int(*name1) - int(*name2);
+}
+
+
+nsMsgGroupRecord*
+nsMsgGroupRecord::Create(nsMsgGroupRecord* parent, const char* partname,
+						PRInt64 aTime, PRInt32 uniqueid, PRInt32 fileoffset)
+{
+	nsMsgGroupRecord* result = new nsMsgGroupRecord(parent, partname,
+												  aTime, uniqueid, fileoffset);
+	if (result && partname && !result->m_partname) {
+		// We ran out of memory.
+		delete result;
+		result = NULL;
+	}
+	result->InitializeSibling();
+	return result;
+}
+
+MOZ_DECL_CTOR_COUNTER(nsMsgGroupRecord);
+
+nsMsgGroupRecord::nsMsgGroupRecord(nsMsgGroupRecord* parent, const char* partname,
+								 PRInt64 aTime, PRInt32 uniqueid, PRInt32 fileoffset,
+								 char delimiter /* = '.' */)
+{
+	MOZ_COUNT_CTOR(nsMsgGroupRecord);
+	int length;
+	m_prettyname = NULL;
+	m_parent = parent;
+	m_children = NULL;
+	m_sibling = NULL;
+	m_flags = 0;
+	m_partname = NULL;
+	m_addtime = aTime;
+	m_uniqueId = uniqueid;
+	m_fileoffset = fileoffset;
+	m_delimiter = delimiter;
+	if (partname) {
+		length = PL_strlen(partname);
+		// PR_ASSERT(parent != NULL);
+		m_partname = new char [length + 1];
+		if (!m_partname) {
+			m_parent = NULL;
+			return;
+		}
+		PL_strcpy(m_partname, partname);
+	}
+}
+
+
+nsMsgGroupRecord::~nsMsgGroupRecord()
+{
+	MOZ_COUNT_DTOR(nsMsgGroupRecord);
+	delete [] m_partname;
+	m_partname = NULL;
+	delete [] m_prettyname;
+	m_prettyname = NULL;
+	while (m_children) {
+		delete m_children;
+	}
+	m_children = NULL;
+	if (m_parent) {
+		nsMsgGroupRecord** ptr;
+		for (ptr = &(m_parent->m_children);
+			 *ptr;
+			 ptr = &((*ptr)->m_sibling)) {
+			if (*ptr == this) {
+				*ptr = m_sibling;
+				break;
+			}
+		}
+	}
+}
+
+void nsMsgGroupRecord::InitializeSibling()
+{
+	if (m_parent) {
+		PR_ASSERT(m_partname != NULL);
+		nsMsgGroupRecord** ptr;
+		for (ptr = &(m_parent->m_children) ; *ptr ; ptr = &((*ptr)->m_sibling)) {
+			int comp = GroupNameCompare((*ptr)->m_partname, m_partname, m_delimiter, IsIMAPGroupRecord());
+			PR_ASSERT(comp != 0);
+			if (comp >= 0) break;
+		}
+		m_sibling = *ptr;
+		*ptr = this;
+	}
+}
+
+
+nsMsgGroupRecord*
+nsMsgGroupRecord::FindDescendant(const char* name)
+{
+	if (!name || !*name) return this;
+	char* ptr = PL_strchr(name, m_delimiter);
+	if (ptr) *ptr = '\0';
+	nsMsgGroupRecord* child;
+	for (child = m_children ; child ; child = child->m_sibling) {
+		if (PL_strcmp(child->m_partname, name) == 0) {
+			break;
+		}
+	}
+	if (ptr) {
+		*ptr++ = m_delimiter;
+		if (child) {
+			return child->FindDescendant(ptr);
+		}
+	}
+	return child;
+}
+
+
+nsMsgGroupRecord*
+nsMsgGroupRecord::GetSiblingOrAncestorSibling()
+{
+	if (m_sibling) return m_sibling;
+	if (m_parent) return m_parent->GetSiblingOrAncestorSibling();
+	return NULL;
+}
+
+nsMsgGroupRecord*
+nsMsgGroupRecord::GetNextAlphabetic()
+{
+	nsMsgGroupRecord* result;
+	if (m_children) result = m_children;
+	else result = GetSiblingOrAncestorSibling();
+#ifdef DEBUG_slowAndParanoid
+	if (result) {
+		char* ptr1 = GetFullName();
+		char* ptr2 = result->GetFullName();
+		PR_ASSERT(GroupNameCompare(ptr1, ptr2) < 0);
+		delete [] ptr1;
+		delete [] ptr2;
+	}
+#endif
+	return result;
+}
+
+nsMsgGroupRecord*
+nsMsgGroupRecord::GetNextAlphabeticNoCategories()
+{
+	if (IsCategoryContainer()) {
+		return GetSiblingOrAncestorSibling();
+	} else {
+		return GetNextAlphabetic();
+	}
+}
+
+
+char*
+nsMsgGroupRecord::GetFullName()
+{
+	int length = 0;
+	nsMsgGroupRecord* ptr;
+	for (ptr = this ; ptr ; ptr = ptr->m_parent) {
+		if (ptr->m_partname) length += PL_strlen(ptr->m_partname) + 1;
+	}
+	PR_ASSERT(length > 0);
+	if (length <= 0) return NULL;
+	char* result = new char [length];
+	if (result) {
+		SuckInName(result);
+		PR_ASSERT(int(PL_strlen(result)) + 1 == length);
+	}
+	return result;
+}
+
+
+char* 
+nsMsgGroupRecord::SuckInName(char* ptr)
+{
+	if (m_parent && m_parent->m_partname) {
+		ptr = m_parent->SuckInName(ptr);
+		*ptr++ = m_delimiter;
+	}
+	PL_strcpy(ptr, m_partname);
+	return ptr + PL_strlen(ptr);
+}
+
+
+
+int
+nsMsgGroupRecord::SetPrettyName(const char* name)
+{
+	if (name == NULL && m_prettyname == NULL) return 0;
+	m_flags |= F_DIRTY;
+	delete [] m_prettyname;
+	m_prettyname = NULL;
+	if (!name || !*name) {
+		return 0;
+	}
+	int length = PL_strlen(name);
+	m_prettyname = new char [length + 1];
+	if (!m_prettyname) {
+		return MK_OUT_OF_MEMORY;
+	}
+	PL_strcpy(m_prettyname, name);
+	return 1;
+}
+
+
+PRBool
+nsMsgGroupRecord::IsCategory()
+{
+	return GetCategoryContainer() != NULL;
+}
+
+PRBool
+nsMsgGroupRecord::IsCategoryContainer()
+{
+	return (m_flags & F_CATCONT) != 0;
+}
+
+PRBool
+nsMsgGroupRecord::NeedsExtraInfo()
+{
+	return (m_flags & F_NEEDEXTRAINFO) != 0;
+}
+
+int
+nsMsgGroupRecord::SetNeedsExtraInfo(PRBool value)
+{
+	return TweakFlag(F_NEEDEXTRAINFO, value);
+}
+
+
+int
+nsMsgGroupRecord::SetIsCategoryContainer(PRBool value)
+{
+	// refuse to set a group to be a category container if it has a parent
+	// that's a category container.
+	if (! (value && GetCategoryContainer()))
+		return TweakFlag(F_CATCONT, value);
+	else
+		return 0;
+}
+
+
+nsMsgGroupRecord*
+nsMsgGroupRecord::GetCategoryContainer()
+{
+	if (IsCategoryContainer()) return NULL;
+	for (nsMsgGroupRecord* ptr = m_parent ; ptr ; ptr = ptr->m_parent) {
+		if (ptr->IsCategoryContainer()) return ptr;
+	}
+	return NULL;
+}
+
+
+nsresult
+nsMsgGroupRecord::IsVirtual(PRBool *retval)
+{
+	*retval =( (m_flags & F_VIRTUAL) != 0);
+    return NS_OK;
+}
+
+nsresult
+nsMsgGroupRecord::SetIsVirtual(PRBool value)
+{
+	TweakFlag(F_VIRTUAL, value);
+    return NS_OK;
+}
+
+
+
+PRBool
+nsMsgGroupRecord::IsExpanded()
+{
+	return (m_flags & F_EXPANDED) != 0;
+}
+
+int
+nsMsgGroupRecord::SetIsExpanded(PRBool value)
+{
+	return TweakFlag(F_EXPANDED, value);
+}
+
+
+PRBool
+nsMsgGroupRecord::IsHTMLOKGroup()
+{
+	return (m_flags & F_HTMLOKGROUP) != 0;
+}
+
+int
+nsMsgGroupRecord::SetIsHTMLOKGroup(PRBool value)
+{
+	return TweakFlag(F_HTMLOKGROUP, value);
+}
+
+
+
+PRBool
+nsMsgGroupRecord::IsHTMLOKTree()
+{
+	return (m_flags & F_HTMLOKTREE) != 0;
+}
+
+int
+nsMsgGroupRecord::SetIsHTMLOKTree(PRBool value)
+{
+	return TweakFlag(F_HTMLOKTREE, value);
+}
+
+
+
+PRBool
+nsMsgGroupRecord::IsGroup()
+{
+	return (m_flags & F_ISGROUP) != 0;
+}
+
+int
+nsMsgGroupRecord::SetIsGroup(PRBool value)
+{
+	return TweakFlag(F_ISGROUP, value);
+}
+
+
+PRBool
+nsMsgGroupRecord::IsDescendentsLoaded()
+{
+	return (m_flags & F_DESCENDENTSLOADED) != 0;
+}
+
+
+int
+nsMsgGroupRecord::SetIsDescendentsLoaded(PRBool value)
+{
+	PR_ASSERT(value);			// No reason we'd ever unset this.
+	TweakFlag(F_DESCENDENTSLOADED, PR_TRUE);
+	nsMsgGroupRecord* child;
+	for (child = m_children ; child ; child = child->m_sibling) {
+		child->SetIsDescendentsLoaded(value);
+	}
+	return 0;
+}
+
+PRBool nsMsgGroupRecord::DoesNotExistOnServer()
+{
+	return (m_flags & F_DOESNOTEXIST) != 0;
+}
+
+int nsMsgGroupRecord::SetDoesNotExistOnServer(PRBool value)
+{
+	if (value)		// turn off group flag if doesn't exist on server.
+		TweakFlag(F_ISGROUP, PR_FALSE);
+	return TweakFlag(F_DOESNOTEXIST, value);
+}
+
+int
+nsMsgGroupRecord::TweakFlag(PRUint32 flagbit, PRBool value)
+{
+	if (value) {
+		if (!(m_flags & flagbit)) {
+			m_flags |= flagbit;
+			if (flagbit & ~RUNTIMEFLAGS)
+				m_flags |= F_DIRTY;
+			return 1;
+		}
+	} else {
+		if (m_flags & flagbit) {
+			m_flags &= ~flagbit;
+			if (flagbit & ~RUNTIMEFLAGS)
+				m_flags |= F_DIRTY;
+			return 1;
+		}
+	}
+	return 0;
+}
+
+
+PRInt32
+nsMsgGroupRecord::GetNumKids()
+{
+	PRInt32 result = 0;
+	nsMsgGroupRecord* child;
+	for (child = m_children ; child ; child = child->m_sibling) {
+		if (IsIMAPGroupRecord())
+			result++;
+		else
+			if (child->m_flags & F_ISGROUP) result++;
+
+		if (!IsIMAPGroupRecord())
+			result += child->GetNumKids();
+	}
+	return result;
+}
+
+
+
+
+char*
+nsMsgGroupRecord::GetSaveString()
+{
+	char* pretty = NULL;
+	char* result = nsnull;
+	
+	if (m_prettyname) {
+		pretty = nsEscape(m_prettyname, url_XAlphas);
+		if (!pretty) return NULL;
+	}
+	char* fullname = GetFullName();
+	if (!fullname) return NULL; {
+		long nAddTime;
+		LL_L2I(nAddTime, m_addtime);
+        result = PR_smprintf("%s,%s,%lx,%lx,%lx" MSG_LINEBREAK,
+							   fullname, pretty ? pretty : "",
+							   (long) (m_flags & ~RUNTIMEFLAGS),
+							   nAddTime,
+							   (long) m_uniqueId);
+	}
+	delete [] fullname;
+	if (pretty) nsCRT::free(pretty);
+	m_flags &= ~F_DIRTY;
+	return result;
+}
+
+
+PRBool
+nsMsgGroupRecord::IsDirty()
+{
+	return (m_flags & F_DIRTY) != 0;
+}
+
+
+PRInt32
+nsMsgGroupRecord::GetDepth()
+{
+	PRInt32 result = 0;
+	nsMsgGroupRecord* tmp = m_parent;
+	while (tmp) {
+		tmp = tmp->m_parent;
+		result++;
+	}
+	return result;
+}
+
+
+
+
+nsMsgGroupRecord*
+nsMsgGroupRecord::Create(nsMsgGroupRecord* parent, const char* saveline,
+						PRInt32 savelinelength, PRInt32 fileoffset)
+{
+	char* tmp;
+	char* ptr;
+	char* endptr;
+	char* partname;
+	char* prettyname;
+	PRInt32 flags;
+	PRInt32 addtime;
+	PRInt32 uniqueid;
+	nsMsgGroupRecord* result = NULL;
+
+	if (savelinelength < 0) savelinelength = PL_strlen(saveline);
+	tmp = (char*) PR_Malloc(savelinelength + 1);
+	if (!tmp) return NULL;
+	PL_strncpy(tmp, saveline, savelinelength);
+	tmp[savelinelength] = '\0';
+	ptr = PL_strchr(tmp, ',');
+	PR_ASSERT(ptr);
+	if (!ptr) goto FAIL;
+	*ptr++ = '\0';
+	partname = PL_strrchr(tmp, '.');
+	if (!partname) partname = tmp;
+	else partname++;
+
+#ifdef DEBUG_slowAndParanoid
+	if (parent->m_partname) {
+		char* parentname = parent->GetFullName();
+		PR_ASSERT(partname > tmp && partname[-1] == '.');
+		partname[-1] = '\0';
+		PR_ASSERT(PL_strcmp(parentname, tmp) == 0);
+		partname[-1] = '.';
+		delete [] parentname;
+		parentname = NULL;
+	} else {
+		PR_ASSERT(partname == tmp);
+	}
+#endif
+
+	endptr = PL_strchr(ptr, ',');
+	PR_ASSERT(endptr);
+	if (!endptr) goto FAIL;
+	*endptr++ = '\0';
+	prettyname = nsUnescape(ptr);
+
+	ptr = endptr;
+	endptr = PL_strchr(ptr, ',');
+	PR_ASSERT(endptr);
+	if (!endptr) goto FAIL;
+	*endptr++ = '\0';
+	flags = strtol(ptr, NULL, 16);
+
+	ptr = endptr;
+	endptr = PL_strchr(ptr, ',');
+	PR_ASSERT(endptr);
+	if (!endptr) goto FAIL;
+	*endptr++ = '\0';
+	addtime = strtol(ptr, NULL, 16);
+
+	ptr = endptr;
+	uniqueid = strtol(ptr, NULL, 16);
+
+	PRInt64 llAddtime;
+	LL_I2L(llAddtime, addtime);
+	result = Create(parent, partname, llAddtime, uniqueid, fileoffset);
+	if (result) {
+		PRBool maybeCategoryContainer = flags & F_CATCONT;
+		flags &= ~F_CATCONT;
+		result->m_flags = flags;
+		if (maybeCategoryContainer)
+			result->SetIsCategoryContainer(PR_TRUE);
+		if (prettyname && *prettyname) result->SetPrettyName(prettyname);
+	}
+
+FAIL:
+	PR_Free(tmp);
+	return result;
+	
+}
+
+
+

mozilla/mailnews/base/util/nsMsgGroupRecord.h

@@ -0,0 +1,160 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+// This class should only be used by the subscribe UI and by newshost.cpp.
+// And, well, a bit by the category code.  Everyone else should use the stuff
+// in newshost.h.
+
+#ifndef _nsMsgGroupRecord_h_
+#define _nsMsgGroupRecord_h__
+
+#include "msgCore.h"
+#include "prtypes.h"
+#include "nsISupports.h"
+
+class nsIMAPGroupRecord;
+
+class NS_MSG_BASE nsMsgGroupRecord {
+public:
+	static nsMsgGroupRecord* Create(nsMsgGroupRecord* parent,
+								   const char* partname,
+                                   PRInt64 m_addtime,
+								   PRInt32 uniqueid,
+								   PRInt32 fileoffset);
+	static nsMsgGroupRecord* Create(nsMsgGroupRecord* parent,
+								   const char* saveline,
+								   PRInt32 savelinelength,
+								   PRInt32 fileoffset);
+
+
+	virtual void	InitializeSibling();
+	virtual PRBool IsIMAPGroupRecord() { return PR_FALSE; }
+	virtual nsIMAPGroupRecord *GetIMAPGroupRecord() { return 0; }
+	
+	// This is just like PL_strcmp(), except it works on news group names.
+	// A container groupname is always less than any contained groups.
+	// So, "netscape.devs-client-technical" > "netscape.devs.directory", even
+	// though PL_strcmp says otherwise.  (YICK!)
+	static int GroupNameCompare(const char* name1,
+								const char* name2,
+								char delimiter = '.',
+								PRBool caseInsensitive = PR_FALSE);
+
+
+	virtual ~nsMsgGroupRecord();
+
+	nsMsgGroupRecord* FindDescendant(const char* name);
+
+	nsMsgGroupRecord* GetParent() {return m_parent;}
+	nsMsgGroupRecord* GetChildren() {return m_children;}
+	nsMsgGroupRecord* GetSibling() {return m_sibling;}
+	nsMsgGroupRecord* GetSiblingOrAncestorSibling();
+	nsMsgGroupRecord* GetNextAlphabetic();
+
+	nsMsgGroupRecord* GetNextAlphabeticNoCategories();
+
+	const char* GetPartName() {return m_partname;}
+
+	// The resulting string must be free'd using delete[].
+	char* GetFullName();
+
+	const char* GetPrettyName() {return m_prettyname;}
+	int SetPrettyName(const char* prettyname);
+
+	PRInt64 GetAddTime() {return m_addtime;}
+
+	virtual PRBool IsCategory();
+	virtual PRBool IsCategoryContainer();
+	virtual int SetIsCategoryContainer(PRBool value);
+
+	nsMsgGroupRecord* GetCategoryContainer();
+
+	// Get/Set whether this is a virtual newsgroup.
+	nsresult IsVirtual(PRBool *retval);
+    nsresult SetIsVirtual(PRBool value);
+
+	// Get/Set whether this is really a newsgroup (and not just a container
+	// for newsgroups).
+	virtual PRBool IsGroup();
+	int SetIsGroup(PRBool value);
+
+	PRBool IsDescendentsLoaded();
+	int SetIsDescendentsLoaded(PRBool value);
+
+	PRBool IsExpanded();
+	int SetIsExpanded(PRBool value);
+
+	PRBool IsHTMLOKGroup();
+	int SetIsHTMLOKGroup(PRBool value);
+
+	PRBool IsHTMLOKTree();
+	int SetIsHTMLOKTree(PRBool value);
+
+	PRBool NeedsExtraInfo();
+	int SetNeedsExtraInfo(PRBool value);
+
+	PRBool DoesNotExistOnServer();
+	int SetDoesNotExistOnServer(PRBool value);
+
+	PRInt32 GetUniqueID() {return m_uniqueId;}
+
+	PRInt32 GetFileOffset() {return m_fileoffset;}
+	int SetFileOffset(PRInt32 value) {m_fileoffset = value; return 0;}
+
+	// Get the number of descendents (not including ourself) that are
+	// really newsgroups.
+	PRInt32 GetNumKids();
+
+	// Gets the string that represents this group in the save file.  The
+	// resulting string must be free'd with PR_Free().
+	char* GetSaveString();
+
+	PRBool IsDirty();			// Whether this record has had changes made
+								// to it.  Cleared by calls to GetSaveString().
+
+	PRInt32 GetDepth();			// Returns how deep in the heirarchy we are.
+								// Basically, the number of dots in the full
+								// newsgroup name, plus 1.
+	virtual char GetHierarchySeparator() { return '.'; }
+
+protected:
+	nsMsgGroupRecord(nsMsgGroupRecord* parent,
+								   const char* partname,
+								   PRInt64 m_addtime,
+								   PRInt32 uniqueid,
+								   PRInt32 fileoffset,
+								   char delimiter = '.');
+	int TweakFlag(PRUint32 flagbit, PRBool value);
+	char* SuckInName(char* ptr);
+
+	char* m_partname;
+	char* m_prettyname;
+	nsMsgGroupRecord* m_parent;
+	nsMsgGroupRecord* m_children;
+	nsMsgGroupRecord* m_sibling;
+	PRUint32 m_flags;
+	PRInt64 m_addtime;
+	PRInt32 m_uniqueId;
+	PRInt32 m_fileoffset;
+	char m_delimiter;
+};
+
+
+
+
+#endif /* _grec_h_ */

mozilla/mailnews/base/util/nsMsgI18N.cpp

@@ -0,0 +1,363 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */ 
+
+// as does this
+#define NS_IMPL_IDS
+#include "nsIServiceManager.h"
+#include "nsICharsetConverterManager.h"
+
+#include "nsISupports.h"
+#include "nsIPref.h"
+#include "nsIMimeConverter.h"
+#include "msgCore.h"
+#include "rosetta_mailnews.h"
+#include "nsMsgI18N.h"
+#include "nsFileSpec.h"
+#include "nsFileStream.h"
+#include "nsMsgMimeCID.h"
+#include "nsMimeTypes.h"
+#include "nsIEntityConverter.h"
+#include "nsISaveAsCharset.h"
+
+static NS_DEFINE_CID(kPrefCID, NS_PREF_CID);
+static NS_DEFINE_CID(kCMimeConverterCID, NS_MIME_CONVERTER_CID);
+static NS_DEFINE_CID(kCharsetConverterManagerCID, NS_ICHARSETCONVERTERMANAGER_CID);
+static NS_DEFINE_CID(kEntityConverterCID, NS_ENTITYCONVERTER_CID);
+static NS_DEFINE_CID(kSaveAsCharsetCID, NS_SAVEASCHARSET_CID);
+
+//
+// International functions necessary for composition
+//
+
+// Convert an unicode string to a C string with a given charset.
+nsresult ConvertFromUnicode(const nsString& aCharset, 
+                            const nsString& inString,
+                            char** outCString)
+{
+  nsresult res;
+
+  NS_WITH_SERVICE(nsICharsetConverterManager, ccm, kCharsetConverterManagerCID, &res); 
+
+  if(NS_SUCCEEDED(res) && (nsnull != ccm)) {
+    nsIUnicodeEncoder* encoder = nsnull;
+    nsString convCharset;
+
+    // map to converter charset
+    if (aCharset.EqualsIgnoreCase("us-ascii")) {
+      convCharset.SetString("iso-8859-1");
+    }
+    else {
+      convCharset = aCharset; 
+    }
+
+    // get an unicode converter
+    res = ccm->GetUnicodeEncoder(&convCharset, &encoder);
+    if(NS_SUCCEEDED(res) && (nsnull != encoder)) {
+      PRUnichar *unichars = (PRUnichar *) inString.GetUnicode();
+      PRInt32 unicharLength = inString.Length();
+      PRInt32 dstLength;
+      res = encoder->GetMaxLength(unichars, unicharLength, &dstLength);
+      // allocale an output buffer
+      *outCString = (char *) PR_Malloc(dstLength + 1);
+      if (nsnull != *outCString) {
+        PRInt32 oldUnicharLength = unicharLength;
+        char *tempCString = *outCString;
+        PRInt32 totalCLength = 0;
+        while (1) {
+          res = encoder->Convert(unichars, &unicharLength, tempCString, &dstLength);
+
+          // increment for destination
+          tempCString += dstLength;
+          totalCLength += dstLength;
+
+          // break: this is usually the case
+          // source length <= zero and no error or unrecoverable error
+          if (0 >= unicharLength || NS_ERROR_UENC_NOMAPPING != res) {
+            break;
+          }
+          // could not map unicode to the destination charset, skip one unichar and continue
+          // increment for source unicode, skip one unichar
+          unichars += unicharLength + 1;
+          oldUnicharLength -= (unicharLength + 1);
+          unicharLength = oldUnicharLength;
+          // estimate target length again
+          (void) encoder->GetMaxLength(unichars, unicharLength, &dstLength);
+        }
+        (*outCString)[totalCLength] = '\0';
+      }
+      else {
+        res = NS_ERROR_OUT_OF_MEMORY;
+      }
+      NS_IF_RELEASE(encoder);
+    }    
+  }
+  return res;
+}
+
+// Convert a C string to an unicode string.
+nsresult ConvertToUnicode(const nsString& aCharset, 
+                          const char* inCString, 
+                          nsString& outString)
+{
+  nsresult res;
+  NS_WITH_SERVICE(nsICharsetConverterManager, ccm, kCharsetConverterManagerCID, &res); 
+
+  if(NS_SUCCEEDED(res) && (nsnull != ccm)) {
+    nsIUnicodeDecoder* decoder = nsnull;
+    PRUnichar *unichars;
+    PRInt32 unicharLength;
+    nsString convCharset;
+
+    // map to converter charset
+    if (aCharset.EqualsIgnoreCase("us-ascii")) {
+      convCharset.SetString("iso-8859-1");
+    }
+    else {
+      convCharset = aCharset; 
+    }
+    // get an unicode converter
+    res = ccm->GetUnicodeDecoder(&convCharset, &decoder);
+    if(NS_SUCCEEDED(res) && (nsnull != decoder)) {
+      PRInt32 srcLen = PL_strlen(inCString);
+      res = decoder->GetMaxLength(inCString, srcLen, &unicharLength);
+      // allocale an output buffer
+      unichars = (PRUnichar *) PR_Malloc(unicharLength * sizeof(PRUnichar));
+      if (unichars != nsnull) {
+        // convert to unicode
+        res = decoder->Convert(inCString, &srcLen, unichars, &unicharLength);
+        outString.SetString(unichars, unicharLength);
+        PR_Free(unichars);
+      }
+      else {
+        res = NS_ERROR_OUT_OF_MEMORY;
+      }
+      NS_IF_RELEASE(decoder);
+    }    
+  }  
+  return res;
+}
+
+// Charset to be used for the internatl processing.
+const char *msgCompHeaderInternalCharset()
+{
+  // UTF-8 is a super set of us-ascii. 
+  // We can use the same string manipulation methods as us-ascii without breaking non us-ascii characters. 
+  return "UTF-8";
+}
+
+// MIME encoder, output string should be freed by PR_FREE
+char * nsMsgI18NEncodeMimePartIIStr(const char *header, const char *charset, PRBool bUseMime) 
+{
+  // No MIME, just duplicate the string.
+  if (PR_FALSE == bUseMime) {
+    return PL_strdup(header);
+  }
+
+  char *encodedString = nsnull;
+  nsIMimeConverter *converter;
+  nsresult res = nsComponentManager::CreateInstance(kCMimeConverterCID, nsnull, 
+                                           nsCOMTypeInfo<nsIMimeConverter>::GetIID(), (void **)&converter);
+  if (NS_SUCCEEDED(res) && nsnull != converter) {
+    res = converter->EncodeMimePartIIStr_UTF8(header, charset, kMIME_ENCODED_WORD_SIZE, &encodedString);
+    NS_RELEASE(converter);
+  }
+  return NS_SUCCEEDED(res) ? encodedString : nsnull;
+}
+
+// MIME decoder
+nsresult nsMsgI18NDecodeMimePartIIStr(const nsString& header, nsString& charset, nsString& decodedString)
+{
+  nsIMimeConverter *converter;
+  nsresult res = nsComponentManager::CreateInstance(kCMimeConverterCID, nsnull, 
+                                                    nsCOMTypeInfo<nsIMimeConverter>::GetIID(), (void **)&converter);
+  if (NS_SUCCEEDED(res) && nsnull != converter) {
+    res = converter->DecodeMimePartIIStr(header, charset, decodedString);
+    NS_RELEASE(converter);
+  }
+  return res;
+}
+
+// Get a default mail character set.
+char * nsMsgI18NGetDefaultMailCharset()
+{
+  nsresult res = NS_OK;
+  char * retVal = nsnull;
+  NS_WITH_SERVICE(nsIPref, prefs, kPrefCID, &res); 
+  if (nsnull != prefs && NS_SUCCEEDED(res))
+  {
+      char *prefValue;
+	  res = prefs->CopyCharPref("intl.character_set_name", &prefValue);
+	  
+	  if (NS_SUCCEEDED(res)) 
+	  {
+  		//TODO: map to mail charset (e.g. Shift_JIS -> ISO-2022-JP) bug#3941.
+  		 retVal = prefValue;
+	  }
+	  else 
+		  retVal = PL_strdup("iso-8859-1");
+  }
+
+  return (nsnull != retVal) ? retVal : PL_strdup("iso-8859-1");
+}
+
+// Return True if a charset is stateful (e.g. JIS).
+PRBool nsMsgI18Nstateful_charset(const char *charset)
+{
+  //TODO: use charset manager's service
+  return (PL_strcasecmp(charset, "iso-2022-jp") == 0);
+}
+
+// Check 7bit in a given buffer.
+// This is expensive (both memory and performance).
+// The check would be very simple if applied to an unicode text (e.g. nsString or utf-8).
+// Possible optimazaion is to search ESC(0x1B) in case of iso-2022-jp and iso-2022-kr.
+// Or convert and check line by line.
+PRBool nsMsgI18N7bit_data_part(const char *charset, const char *inString, const PRUint32 size)
+{
+  char *aCString;
+  nsString aCharset(charset);
+  nsString outString;
+  nsresult res;
+  
+  aCString = (char *) PR_Malloc(size + 1);
+  if (nsnull != aCString) {
+    PL_strncpy(aCString, inString, size); // make a C string
+    res = ConvertToUnicode(aCharset, aCString, outString);
+    PR_Free(aCString);
+    if (NS_SUCCEEDED(res)) {
+      for (PRInt32 i = 0; i < outString.Length(); i++) {
+        if (outString.CharAt(i) > 127) {
+          return PR_FALSE;
+        }
+      }
+    }
+  }
+  return PR_TRUE;  // all 7 bit
+}
+
+// Simple parser to parse META charset. 
+// It only supports the case when the description is within one line. 
+const char * 
+nsMsgI18NParseMetaCharset(nsFileSpec* fileSpec) 
+{ 
+  static char charset[65]; 
+  char buffer[512]; 
+  nsInputFileStream fileStream(*fileSpec); 
+
+  *charset = '\0'; 
+
+  while (!fileStream.eof() && !fileStream.failed() && 
+         fileStream.is_open()) { 
+    fileStream.readline(buffer, 512); 
+    if (*buffer == CR || *buffer == LF || *buffer == 0) 
+      continue; 
+
+    for (int i = 0; i < (int)PL_strlen(buffer); i++) { 
+      buffer[i] = toupper(buffer[i]); 
+    } 
+
+    if (PL_strstr(buffer, "/HEAD")) 
+      break; 
+
+    if (PL_strstr(buffer, "META") && 
+        PL_strstr(buffer, "HTTP-EQUIV") && 
+        PL_strstr(buffer, "CONTENT-TYPE") && 
+        PL_strstr(buffer, "CHARSET") 
+        ) 
+    { 
+      char *cp = PL_strstr(PL_strstr(buffer, "CHARSET"), "=") + 1; 
+      char seps[]   = " \"\'"; 
+      char *token; 
+      char* newStr; 
+      token = nsCRT::strtok(cp, seps, &newStr); 
+      if (token != NULL) 
+      { 
+        PL_strcpy(charset, token); 
+      } 
+    } 
+  } 
+
+  return charset; 
+} 
+
+nsresult nsMsgI18NConvertToEntity(const nsString& inString, nsString* outString)
+{
+  nsresult res;
+
+  outString->SetString("");
+  nsCOMPtr <nsIEntityConverter> entityConv;
+  res = nsComponentManager::CreateInstance(kEntityConverterCID, NULL, 
+                                           nsIEntityConverter::GetIID(), getter_AddRefs(entityConv));
+  if(NS_SUCCEEDED(res)) {
+    PRUnichar *entities = NULL;
+    res = entityConv->ConvertToEntities(inString.GetUnicode(), nsIEntityConverter::html40Latin1, &entities);
+    if (NS_SUCCEEDED(res) && (NULL != entities)) {
+      outString->SetString(entities);
+      nsAllocator::Free(entities);
+     }
+   }
+ 
+  return res;
+}
+
+nsresult nsMsgI18NSaveAsCharset(const char* contentType, const char *charset, const PRUnichar* inString, char** outString)
+{
+  NS_ASSERTION(contentType, "null ptr- contentType");
+  NS_ASSERTION(charset, "null ptr- charset");
+  NS_ASSERTION(outString, "null ptr- outString");
+  if(!contentType || !charset || !outString)
+    return NS_ERROR_NULL_POINTER;
+  *outString = NULL;
+
+  PRBool bTEXT_HTML = PR_FALSE;
+  nsresult res;
+
+  if (!nsCRT::strcasecmp(contentType, TEXT_HTML)) {
+    bTEXT_HTML = PR_TRUE;
+  }
+  else if (nsCRT::strcasecmp(contentType, TEXT_PLAIN)) {
+    return NS_ERROR_ILLEGAL_VALUE;  // not supported type
+  }
+
+  nsCOMPtr <nsISaveAsCharset> aConv;  // charset converter plus entity, NCR generation
+  res = nsComponentManager::CreateInstance(kSaveAsCharsetCID, NULL, 
+                                           nsISaveAsCharset::GetIID(), getter_AddRefs(aConv));
+  if(NS_SUCCEEDED(res)) {
+    // attribute: 
+    // html text - charset conv then fallback to entity or NCR
+    // plain text - charset conv then fallback to '?'
+    res = aConv->Init(charset, 
+                      bTEXT_HTML ? 
+                      nsISaveAsCharset::attr_EntityAfterCharsetConv + nsISaveAsCharset::attr_FallbackDecimalNCR : 
+                      nsISaveAsCharset::attr_plainTextDefault + nsISaveAsCharset::attr_FallbackQuestionMark, 
+                      nsIEntityConverter::html40);
+    if (NS_SUCCEEDED(res)) {
+      res = aConv->Convert(inString, outString);
+    }
+  }
+ 
+  return res;
+}
+
+// RICHIE - not sure about this one?? need to see what it did in the old
+// world.
+char *
+nsMsgI18NGetAcceptLanguage(void)
+{
+  return "en";
+}

mozilla/mailnews/base/util/nsMsgI18N.h

@@ -0,0 +1,49 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#ifndef _nsMsgI18N_H_
+#define _nsMsgI18N_H_
+
+#include "nscore.h"
+#include "msgCore.h"
+
+
+NS_MSG_BASE char      *nsMsgI18NEncodeMimePartIIStr(const char *header, const char *charset, PRBool bUseMime);
+NS_MSG_BASE PRBool    nsMsgI18Nstateful_charset(const char *charset);
+NS_MSG_BASE PRBool    nsMsgI18N7bit_data_part(const char *charset, const char *string, const PRUint32 size);
+NS_MSG_BASE char      *nsMsgI18NGetAcceptLanguage(void); 
+
+NS_MSG_BASE const char *msgCompHeaderInternalCharset(void);
+
+NS_MSG_BASE char * nsMsgI18NGetDefaultMailCharset(void);
+NS_MSG_BASE nsresult ConvertFromUnicode(const nsString& aCharset, 
+                                   const nsString& inString,
+                                   char** outCString);
+NS_MSG_BASE nsresult ConvertToUnicode(const nsString& aCharset, 
+                                 const char* inCString, 
+                                 nsString& outString);
+
+NS_MSG_BASE nsresult nsMsgI18NDecodeMimePartIIStr(const nsString& header, nsString& charset, nsString& decodedString);
+
+NS_MSG_BASE const char *nsMsgI18NParseMetaCharset(nsFileSpec* fileSpec);
+
+NS_MSG_BASE nsresult nsMsgI18NConvertToEntity(const nsString& inString, nsString* outString);
+
+NS_MSG_BASE nsresult nsMsgI18NSaveAsCharset(const char* contentType, const char* charset, const PRUnichar* inString, char** outString);
+
+#endif /* _nsMsgI18N_H_ */

mozilla/mailnews/base/util/nsMsgIdentity.cpp

@@ -0,0 +1,356 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "msgCore.h" // for pre-compiled headers
+#include "nsMsgIdentity.h"
+#include "nsIPref.h"
+#include "nsXPIDLString.h"
+
+static NS_DEFINE_CID(kPrefServiceCID, NS_PREF_CID);
+
+NS_IMPL_ISUPPORTS2(nsMsgIdentity,
+                   nsIMsgIdentity,
+                   nsIShutdownListener)
+
+nsMsgIdentity::nsMsgIdentity():
+  m_signature(0),
+  m_vCard(0),
+  m_identityKey(0),
+  m_prefs(0)
+{
+	NS_INIT_REFCNT();
+}
+
+nsMsgIdentity::~nsMsgIdentity()
+{
+  PR_FREEIF(m_identityKey);
+  if (m_prefs) nsServiceManager::ReleaseService(kPrefServiceCID,
+                                                m_prefs,
+                                                nsnull);
+}
+
+nsresult
+nsMsgIdentity::getPrefService()
+{
+  if (m_prefs) return NS_OK;
+  return nsServiceManager::GetService(kPrefServiceCID,
+                                      nsCOMTypeInfo<nsIPref>::GetIID(),
+                                      (nsISupports**)&m_prefs,
+                                      this);
+}
+
+
+/* called if the prefs service goes offline */
+NS_IMETHODIMP
+nsMsgIdentity::OnShutdown(const nsCID& aClass, nsISupports *service)
+{
+  if (aClass.Equals(kPrefServiceCID)) {
+    if (m_prefs) nsServiceManager::ReleaseService(kPrefServiceCID, m_prefs);
+    m_prefs = nsnull;
+  }
+
+  return NS_OK;
+}
+
+/*
+ * accessors for pulling values directly out of preferences
+ * instead of member variables, etc
+ */
+
+/* convert an identity key and preference name
+   to mail.identity.<identityKey>.<prefName>
+*/
+char *
+nsMsgIdentity::getPrefName(const char *identityKey,
+                           const char *prefName)
+{
+  return PR_smprintf("mail.identity.%s.%s", identityKey, prefName);
+}
+
+// this will be slightly faster than the above, and allows
+// the "default" identity preference root to be set in one place
+char *
+nsMsgIdentity::getDefaultPrefName(const char *fullPrefName)
+{
+  return PR_smprintf("mail.identity.default.%s", fullPrefName);
+}
+
+/* The following are equivalent to the nsIPref's Get/CopyXXXPref
+   except they construct the preference name with the above function
+*/
+nsresult
+nsMsgIdentity::getBoolPref(const char *prefname,
+                           PRBool *val)
+{
+  nsresult rv = getPrefService();
+  if (NS_FAILED(rv)) return rv;
+  
+  char *fullPrefName = getPrefName(m_identityKey, prefname);
+  rv = m_prefs->GetBoolPref(fullPrefName, val);
+  PR_Free(fullPrefName);
+
+  if (NS_FAILED(rv))
+    rv = getDefaultBoolPref(prefname, val);
+  
+  return rv;
+}
+
+nsresult
+nsMsgIdentity::getDefaultBoolPref(const char *prefname,
+                                        PRBool *val) {
+  
+  nsresult rv = getPrefService();
+  if (NS_FAILED(rv)) return rv;
+  
+  char *fullPrefName = getDefaultPrefName(prefname);
+  rv = m_prefs->GetBoolPref(fullPrefName, val);
+  PR_Free(fullPrefName);
+
+  if (NS_FAILED(rv)) {
+    *val = PR_FALSE;
+    rv = NS_OK;
+  }
+  return rv;
+}
+
+nsresult
+nsMsgIdentity::setBoolPref(const char *prefname,
+                           PRBool val)
+{
+  nsresult rv = getPrefService();
+  if (NS_FAILED(rv)) return rv;
+  
+  char *prefName = getPrefName(m_identityKey, prefname);
+  rv = m_prefs->SetBoolPref(prefName, val);
+  PR_Free(prefName);
+  return rv;
+}
+
+nsresult
+nsMsgIdentity::getCharPref(const char *prefname,
+                           char **val)
+{
+  nsresult rv = getPrefService();
+  if (NS_FAILED(rv)) return rv;
+  
+  char *fullPrefName = getPrefName(m_identityKey, prefname);
+  rv = m_prefs->CopyCharPref(fullPrefName, val);
+  PR_Free(fullPrefName);
+
+  if (NS_FAILED(rv))
+    rv = getDefaultCharPref(prefname, val);
+
+  return rv;
+}
+
+nsresult
+nsMsgIdentity::getDefaultCharPref(const char *prefname,
+                                        char **val)
+{
+  nsresult rv = getPrefService();
+  if (NS_FAILED(rv)) return rv;
+  
+  char *fullPrefName = getDefaultPrefName(prefname);
+  rv = m_prefs->CopyCharPref(fullPrefName, val);
+  PR_Free(fullPrefName);
+
+  if (NS_FAILED(rv)) {
+    *val = nsnull;              // null is ok to return here
+    rv = NS_OK;
+  }
+  return rv;
+}
+
+nsresult
+nsMsgIdentity::setCharPref(const char *prefname,
+                           const char *val)
+{
+  nsresult rv = getPrefService();
+  if (NS_FAILED(rv)) return rv;
+  
+  rv = NS_OK;
+  char *prefName = getPrefName(m_identityKey, prefname);
+  if (val) 
+    rv = m_prefs->SetCharPref(prefName, val);
+  else
+    m_prefs->ClearUserPref(prefName);
+  PR_Free(prefName);
+  return rv;
+}
+
+nsresult
+nsMsgIdentity::getIntPref(const char *prefname,
+                                PRInt32 *val)
+{
+  nsresult rv = getPrefService();
+  if (NS_FAILED(rv)) return rv;
+  
+  char *fullPrefName = getPrefName(m_identityKey, prefname);
+  rv = m_prefs->GetIntPref(fullPrefName, val);
+  PR_Free(fullPrefName);
+
+  if (NS_FAILED(rv))
+	rv = getDefaultIntPref(prefname, val);
+
+  return rv;
+}
+
+nsresult
+nsMsgIdentity::getDefaultIntPref(const char *prefname,
+                                        PRInt32 *val) {
+  
+  nsresult rv = getPrefService();
+  if (NS_FAILED(rv)) return rv;
+  
+  char *fullPrefName = getDefaultPrefName(prefname);
+  rv = m_prefs->GetIntPref(fullPrefName, val);
+  PR_Free(fullPrefName);
+
+  if (NS_FAILED(rv)) {
+    *val = 0;
+    rv = NS_OK;
+  }
+  
+  return rv;
+}
+
+nsresult
+nsMsgIdentity::setIntPref(const char *prefname,
+                                 PRInt32 val)
+{
+  nsresult rv = getPrefService();
+  if (NS_FAILED(rv)) return rv;
+  
+  char *prefName = getPrefName(m_identityKey, prefname);
+  rv = m_prefs->SetIntPref(prefName, val);
+  PR_Free(prefName);
+  return rv;
+}
+
+nsresult
+nsMsgIdentity::SetKey(const char* identityKey)
+{
+  PR_FREEIF(m_identityKey);
+  m_identityKey = PL_strdup(identityKey);
+  return NS_OK;
+}
+
+nsresult
+nsMsgIdentity::GetIdentityName(char **idName) {
+  if (!idName) return NS_ERROR_NULL_POINTER;
+
+  *idName = nsnull;
+  nsresult rv = getCharPref("identityName",idName);
+  if (NS_FAILED(rv)) return rv;
+
+  // there's probably a better way of doing this
+  // thats unicode friendly?
+  if (!(*idName)) {
+    nsXPIDLCString fullName;
+    rv = GetFullName(getter_Copies(fullName));
+    if (NS_FAILED(rv)) return rv;
+    
+    nsXPIDLCString email;
+    rv = GetEmail(getter_Copies(email));
+    if (NS_FAILED(rv)) return rv;
+    
+    *idName = PR_smprintf("%s <%s>", (const char*)fullName,
+                          (const char*)email);
+    rv = NS_OK;
+  }
+
+  return rv;
+}
+
+nsresult nsMsgIdentity::SetIdentityName(const char *idName) {
+  return setCharPref("identityName", idName);
+}
+
+NS_IMETHODIMP
+nsMsgIdentity::ToString(PRUnichar **aResult)
+{
+  nsString idname("[nsIMsgIdentity: ");
+  idname += m_identityKey;
+  idname += "]";
+
+  *aResult = idname.ToNewUnicode();
+  return NS_OK;
+}
+
+/* Identity attribute accessors */
+
+// XXX - these are a COM objects, use NS_ADDREF
+//NS_IMPL_GETSET(nsMsgIdentity, Signature, nsIMsgSignature*, m_signature);
+NS_IMETHODIMP
+nsMsgIdentity::GetSignature(nsIFileSpec **sig) {
+  nsresult rv = getPrefService();
+  if (NS_FAILED(rv)) return rv;
+  
+  char *prefName = getPrefName(m_identityKey, "sig_file");
+  rv = m_prefs->GetFilePref(prefName, sig);
+  if (NS_FAILED(rv))
+    *sig = nsnull;
+  return NS_OK;
+}
+
+NS_IMETHODIMP
+nsMsgIdentity::SetSignature(nsIFileSpec *sig)
+{
+
+  nsresult rv = getPrefService();
+  if (NS_FAILED(rv)) return rv;
+  
+  rv = NS_OK;
+  char *prefName = getPrefName(m_identityKey, "sig_file");
+  if (sig) 
+    rv = m_prefs->SetFilePref(NS_CONST_CAST(const char*,prefName), sig,
+                              PR_FALSE);
+  /*
+  else
+    m_prefs->ClearFilePref(prefName);
+  */
+  PR_Free(prefName);
+  return rv;
+  
+  return NS_OK;
+}
+
+NS_IMPL_GETSET(nsMsgIdentity, VCard, nsIMsgVCard*, m_vCard);
+  
+NS_IMPL_GETTER_STR(nsMsgIdentity::GetKey, m_identityKey);
+
+NS_IMPL_IDPREF_STR(FullName, "fullName");
+NS_IMPL_IDPREF_STR(Email, "useremail");
+NS_IMPL_IDPREF_STR(ReplyTo, "reply_to");
+NS_IMPL_IDPREF_STR(Organization, "organization");
+NS_IMPL_IDPREF_BOOL(ComposeHtml, "compose_html");
+NS_IMPL_IDPREF_BOOL(AttachVCard, "attach_vcard");
+NS_IMPL_IDPREF_BOOL(AttachSignature, "attach_signature");
+
+NS_IMPL_IDPREF_BOOL(DoFcc, "fcc");
+NS_IMPL_IDPREF_STR(FccFolder, "fcc_folder");
+
+NS_IMPL_IDPREF_BOOL(BccSelf, "bcc_self");
+NS_IMPL_IDPREF_BOOL(BccOthers, "bcc_other");
+NS_IMPL_IDPREF_STR (BccList, "bcc_other_list");
+
+NS_IMPL_IDPREF_STR (DraftFolder, "draft_folder");
+NS_IMPL_IDPREF_STR (StationaryFolder, "stationary_folder");
+NS_IMPL_IDPREF_STR (JunkMailFolder, "spam_folder");
+
+

mozilla/mailnews/base/util/nsMsgIdentity.h

@@ -0,0 +1,110 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#ifndef nsMsgIdentity_h___
+#define nsMsgIdentity_h___
+
+#include "nsIMsgIdentity.h"
+#include "nsIPref.h"
+#include "msgCore.h"
+
+///////////////////////////////////////////////////////////////////////////////////
+// an identity is an object designed to encapsulate all the information we need 
+// to know about a user identity. I expect this interface to grow and change a lot
+// as we flesh out our thoughts on multiple identities and what properties go into
+// these identities.
+//////////////////////////////////////////////////////////////////////////////////
+
+
+class NS_MSG_BASE nsMsgIdentity : public nsIMsgIdentity,
+                                  public nsIShutdownListener
+{
+public:
+  nsMsgIdentity();
+  virtual ~nsMsgIdentity();
+  
+  NS_DECL_ISUPPORTS
+  NS_DECL_NSIMSGIDENTITY
+
+  // nsIShutdownListener
+  
+  NS_IMETHOD OnShutdown(const nsCID& aClass, nsISupports *service);
+  
+private:
+  nsIMsgSignature* m_signature;
+  nsIMsgVCard* m_vCard;
+  char *m_identityKey;
+  nsIPref *m_prefs;
+
+protected:
+  nsresult getPrefService();
+  char *getPrefName(const char *identityKey, const char *pref);
+  char *getDefaultPrefName(const char *pref);
+  nsresult getCharPref(const char *pref, char **);
+  nsresult getDefaultCharPref(const char *pref, char **);
+  nsresult setCharPref(const char *pref, const char *);
+
+  nsresult getBoolPref(const char *pref, PRBool *);
+  nsresult getDefaultBoolPref(const char *pref, PRBool *);
+  nsresult setBoolPref(const char *pref, PRBool);
+
+  nsresult getIntPref(const char *pref, PRInt32 *);
+  nsresult getDefaultIntPref(const char *pref, PRInt32 *);
+  nsresult setIntPref(const char *pref, PRInt32);
+
+};
+
+
+#define NS_IMPL_IDPREF_STR(_postfix, _prefname)	\
+NS_IMETHODIMP								   	\
+nsMsgIdentity::Get##_postfix(char **retval)   	\
+{											   	\
+  return getCharPref(_prefname, retval);		\
+}												\
+NS_IMETHODIMP	   								\
+nsMsgIdentity::Set##_postfix(const char *value)		\
+{												\
+  return setCharPref(_prefname, value);\
+}
+
+#define NS_IMPL_IDPREF_BOOL(_postfix, _prefname)\
+NS_IMETHODIMP								   	\
+nsMsgIdentity::Get##_postfix(PRBool *retval)   	\
+{											   	\
+  return getBoolPref(_prefname, retval);		\
+}												\
+NS_IMETHODIMP	   								\
+nsMsgIdentity::Set##_postfix(PRBool value)		\
+{												\
+  return setBoolPref(_prefname, value);			\
+}
+
+#define NS_IMPL_IDPREF_INT(_postfix, _prefname) \
+NS_IMETHODIMP								   	\
+nsMsgIdentity::Get##_postfix(PRInt32 *retval)   \
+{											   	\
+  return getIntPref(_prefname, retval);		\
+}												\
+NS_IMETHODIMP	   								\
+nsMsgIdentity::Set##_postfix(PRInt32 value)		\
+{												\
+  return setIntPref(_prefname, value);			\
+}
+
+
+#endif /* nsMsgIdentity_h___ */

mozilla/mailnews/base/util/nsMsgIncomingServer.cpp

@@ -0,0 +1,603 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "nsMsgIncomingServer.h"
+#include "nscore.h"
+#include "nsCom.h"
+#include "plstr.h"
+#include "prmem.h"
+#include "prprf.h"
+
+#include "nsIServiceManager.h"
+#include "nsIPref.h"
+#include "nsCOMPtr.h"
+#include "nsIMsgFolder.h"
+#include "nsIMsgFolderCache.h"
+#include "nsIMsgFolderCacheElement.h"
+#include "nsINetSupportDialogService.h"
+#include "nsIPrompt.h"
+#include "nsXPIDLString.h"
+#include "nsIRDFService.h"
+#include "nsIMsgProtocolInfo.h"
+#include "nsRDFCID.h"
+
+static NS_DEFINE_CID(kPrefServiceCID, NS_PREF_CID);
+static NS_DEFINE_CID(kNetSupportDialogCID, NS_NETSUPPORTDIALOG_CID);
+static NS_DEFINE_CID(kRDFServiceCID, NS_RDFSERVICE_CID);
+
+MOZ_DECL_CTOR_COUNTER(nsMsgIncomingServer);
+
+nsMsgIncomingServer::nsMsgIncomingServer():
+    m_prefs(0),
+    m_serverKey(0),
+    m_rootFolder(0)
+{
+  MOZ_COUNT_CTOR(nsMsgIncomingServer);
+
+  NS_INIT_REFCNT();
+  m_serverBusy = PR_FALSE;
+  m_password = "";
+}
+
+nsMsgIncomingServer::~nsMsgIncomingServer()
+{
+	
+	MOZ_COUNT_DTOR(nsMsgIncomingServer);
+
+    if (m_prefs) nsServiceManager::ReleaseService(kPrefServiceCID,
+                                                  m_prefs,
+                                                  nsnull);
+    PR_FREEIF(m_serverKey)
+}
+
+NS_IMPL_ISUPPORTS1(nsMsgIncomingServer, nsIMsgIncomingServer)
+
+NS_IMPL_GETSET(nsMsgIncomingServer, ServerBusy, PRBool, m_serverBusy)
+NS_IMPL_GETTER_STR(nsMsgIncomingServer::GetKey, m_serverKey)
+
+
+NS_IMETHODIMP
+nsMsgIncomingServer::SetKey(const char * serverKey)
+{
+    nsresult rv = NS_OK;
+    // in order to actually make use of the key, we need the prefs
+    if (!m_prefs)
+        rv = nsServiceManager::GetService(kPrefServiceCID,
+                                          nsCOMTypeInfo<nsIPref>::GetIID(),
+                                          (nsISupports**)&m_prefs);
+
+    PR_FREEIF(m_serverKey);
+    m_serverKey = PL_strdup(serverKey);
+    return rv;
+}
+    
+NS_IMETHODIMP
+nsMsgIncomingServer::SetRootFolder(nsIFolder * aRootFolder)
+{
+	m_rootFolder = aRootFolder;
+	return NS_OK;
+}
+
+NS_IMETHODIMP
+nsMsgIncomingServer::GetRootFolder(nsIFolder * *aRootFolder)
+{
+	if (!aRootFolder)
+		return NS_ERROR_NULL_POINTER;
+    if (m_rootFolder) {
+      *aRootFolder = m_rootFolder;
+      NS_ADDREF(*aRootFolder);
+    } else {
+      nsresult rv = CreateRootFolder();
+      if (NS_FAILED(rv)) return rv;
+      
+      *aRootFolder = m_rootFolder;
+      NS_IF_ADDREF(*aRootFolder);
+    }
+	return NS_OK;
+}
+  
+NS_IMETHODIMP
+nsMsgIncomingServer::PerformBiff()
+{
+	//This had to be implemented in the derived class, but in case someone doesn't implement it
+	//just return not implemented.
+	return NS_ERROR_NOT_IMPLEMENTED;	
+}
+
+NS_IMETHODIMP nsMsgIncomingServer::WriteToFolderCache(nsIMsgFolderCache *folderCache)
+{
+	nsresult rv = NS_OK;
+	if (m_rootFolder)
+	{
+		nsCOMPtr <nsIMsgFolder> msgFolder = do_QueryInterface(m_rootFolder, &rv);
+		if (NS_SUCCEEDED(rv) && msgFolder)
+			rv = msgFolder->WriteToFolderCache(folderCache);
+	}
+	return rv;
+}
+
+NS_IMETHODIMP
+nsMsgIncomingServer::CloseCachedConnections()
+{
+	// derived class should override if they cache connections.
+	return NS_OK;
+}
+
+
+NS_IMETHODIMP
+nsMsgIncomingServer::GetServerURI(char **)
+{
+  return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+nsresult
+nsMsgIncomingServer::CreateRootFolder()
+{
+	nsresult rv;
+			  // get the URI from the incoming server
+  nsXPIDLCString serverUri;
+  rv = GetServerURI(getter_Copies(serverUri));
+  if (NS_FAILED(rv)) return rv;
+
+  NS_WITH_SERVICE(nsIRDFService, rdf,
+                        kRDFServiceCID, &rv);
+
+  // get the corresponding RDF resource
+  // RDF will create the server resource if it doesn't already exist
+  nsCOMPtr<nsIRDFResource> serverResource;
+  rv = rdf->GetResource(serverUri, getter_AddRefs(serverResource));
+  if (NS_FAILED(rv)) return rv;
+
+  // make incoming server know about its root server folder so we 
+  // can find sub-folders given an incoming server.
+  m_rootFolder = do_QueryInterface(serverResource, &rv);
+  return rv;
+}
+
+char *
+nsMsgIncomingServer::getPrefName(const char *serverKey,
+                                 const char *fullPrefName)
+{
+  return PR_smprintf("mail.server.%s.%s", serverKey, fullPrefName);
+}
+
+// this will be slightly faster than the above, and allows
+// the "default" server preference root to be set in one place
+char *
+nsMsgIncomingServer::getDefaultPrefName(const char *fullPrefName)
+{
+  return PR_smprintf("mail.server.default.%s", fullPrefName);
+}
+
+
+nsresult
+nsMsgIncomingServer::GetBoolValue(const char *prefname,
+                                 PRBool *val)
+{
+  char *fullPrefName = getPrefName(m_serverKey, prefname);
+  nsresult rv = m_prefs->GetBoolPref(fullPrefName, val);
+  PR_Free(fullPrefName);
+  
+  if (NS_FAILED(rv))
+    rv = getDefaultBoolPref(prefname, val);
+  
+  return rv;
+}
+
+nsresult
+nsMsgIncomingServer::getDefaultBoolPref(const char *prefname,
+                                        PRBool *val) {
+  
+  char *fullPrefName = getDefaultPrefName(prefname);
+  nsresult rv = m_prefs->GetBoolPref(fullPrefName, val);
+  PR_Free(fullPrefName);
+
+  if (NS_FAILED(rv)) {
+    *val = PR_FALSE;
+    rv = NS_OK;
+  }
+  return rv;
+}
+
+nsresult
+nsMsgIncomingServer::SetBoolValue(const char *prefname,
+                                 PRBool val)
+{
+  nsresult rv;
+  char *fullPrefName = getPrefName(m_serverKey, prefname);
+
+  PRBool defaultValue;
+  rv = getDefaultBoolPref(prefname, &defaultValue);
+
+  if (NS_SUCCEEDED(rv) &&
+      val == defaultValue)
+    m_prefs->ClearUserPref(fullPrefName);
+  else
+    rv = m_prefs->SetBoolPref(fullPrefName, val);
+  
+  PR_Free(fullPrefName);
+  
+  return rv;
+}
+
+nsresult
+nsMsgIncomingServer::GetIntValue(const char *prefname,
+                                PRInt32 *val)
+{
+  char *fullPrefName = getPrefName(m_serverKey, prefname);
+  nsresult rv = m_prefs->GetIntPref(fullPrefName, val);
+  PR_Free(fullPrefName);
+
+  if (NS_FAILED(rv))
+    rv = getDefaultIntPref(prefname, val);
+  
+  return rv;
+}
+
+nsresult
+nsMsgIncomingServer::GetFileValue(const char* prefname,
+                                  nsIFileSpec **spec)
+{
+  char *fullPrefName = getPrefName(m_serverKey, prefname);
+  nsresult rv = m_prefs->GetFilePref(fullPrefName, spec);
+  PR_Free(fullPrefName);
+
+  return rv;
+}
+
+nsresult
+nsMsgIncomingServer::SetFileValue(const char* prefname,
+                                    nsIFileSpec *spec)
+{
+  char *fullPrefName = getPrefName(m_serverKey, prefname);
+  nsresult rv = m_prefs->SetFilePref(fullPrefName, spec, PR_FALSE);
+  PR_Free(fullPrefName);
+
+  return rv;
+}
+
+nsresult
+nsMsgIncomingServer::getDefaultIntPref(const char *prefname,
+                                        PRInt32 *val) {
+  
+  char *fullPrefName = getDefaultPrefName(prefname);
+  nsresult rv = m_prefs->GetIntPref(fullPrefName, val);
+  PR_Free(fullPrefName);
+
+  if (NS_FAILED(rv)) {
+    *val = 0;
+    rv = NS_OK;
+  }
+  
+  return rv;
+}
+
+nsresult
+nsMsgIncomingServer::SetIntValue(const char *prefname,
+                                 PRInt32 val)
+{
+  nsresult rv;
+  char *fullPrefName = getPrefName(m_serverKey, prefname);
+  
+  PRInt32 defaultVal;
+  rv = getDefaultIntPref(prefname, &defaultVal);
+  
+  if (NS_SUCCEEDED(rv) && defaultVal == val)
+    m_prefs->ClearUserPref(fullPrefName);
+  else
+    rv = m_prefs->SetIntPref(fullPrefName, val);
+  
+  PR_Free(fullPrefName);
+  
+  return rv;
+}
+
+nsresult
+nsMsgIncomingServer::GetCharValue(const char *prefname,
+                                 char  **val)
+{
+  char *fullPrefName = getPrefName(m_serverKey, prefname);
+  nsresult rv = m_prefs->CopyCharPref(fullPrefName, val);
+  PR_Free(fullPrefName);
+  
+  if (NS_FAILED(rv))
+    rv = getDefaultCharPref(prefname, val);
+  
+  return rv;
+}
+
+nsresult
+nsMsgIncomingServer::getDefaultCharPref(const char *prefname,
+                                        char **val) {
+  
+  char *fullPrefName = getDefaultPrefName(prefname);
+  nsresult rv = m_prefs->CopyCharPref(fullPrefName, val);
+  PR_Free(fullPrefName);
+
+  if (NS_FAILED(rv)) {
+    *val = nsnull;              // null is ok to return here
+    rv = NS_OK;
+  }
+  return rv;
+}
+
+nsresult
+nsMsgIncomingServer::SetCharValue(const char *prefname,
+                                 const char * val)
+{
+  nsresult rv;
+  char *fullPrefName = getPrefName(m_serverKey, prefname);
+
+  if (!val) {
+    m_prefs->ClearUserPref(fullPrefName);
+    return NS_OK;
+  }
+  
+  char *defaultVal=nsnull;
+  rv = getDefaultCharPref(prefname, &defaultVal);
+  
+  if (NS_SUCCEEDED(rv) &&
+      PL_strcmp(defaultVal, val) == 0)
+    m_prefs->ClearUserPref(fullPrefName);
+  else
+    rv = m_prefs->SetCharPref(fullPrefName, val);
+  
+  PR_FREEIF(defaultVal);
+  PR_Free(fullPrefName);
+  
+  return rv;
+}
+
+// pretty name is the display name to show to the user
+NS_IMETHODIMP
+nsMsgIncomingServer::GetPrettyName(PRUnichar **retval) {
+
+  char *val=nsnull;
+  nsresult rv = GetCharValue("name", &val);
+  if (NS_FAILED(rv)) return rv;
+
+  nsString prettyName;
+  
+  // if there's no name, then just return the hostname
+  if (val) {
+    prettyName = val;
+  } else {
+    
+    nsXPIDLCString username;
+    rv = GetUsername(getter_Copies(username));
+    if (NS_FAILED(rv)) return rv;
+    if ((const char*)username &&
+        PL_strcmp((const char*)username, "")!=0) {
+      prettyName = username;
+      prettyName += " on ";
+    }
+    
+    nsXPIDLCString hostname;
+    rv = GetHostName(getter_Copies(hostname));
+    if (NS_FAILED(rv)) return rv;
+
+
+    prettyName += hostname;
+  }
+
+  *retval = prettyName.ToNewUnicode();
+  
+  return NS_OK;
+}
+
+NS_IMETHODIMP
+nsMsgIncomingServer::SetPrettyName(const PRUnichar *value) {
+  // this is lossy. Not sure what to do.
+  nsCString str(value);
+  return SetCharValue("name", str.GetBuffer());
+}
+
+NS_IMETHODIMP
+nsMsgIncomingServer::ToString(PRUnichar** aResult) {
+  nsString servername("[nsIMsgIncomingServer: ");
+  servername += m_serverKey;
+  servername += "]";
+  
+  *aResult = servername.ToNewUnicode();
+  NS_ASSERTION(*aResult, "no server name!");
+  return NS_OK;
+}
+  
+
+NS_IMETHODIMP nsMsgIncomingServer::SetPassword(const char * aPassword)
+{
+	// if remember password is turned on, write the password to preferences
+	// otherwise, just set the password so we remember it for the rest of the current
+	// session.
+
+	PRBool rememberPassword = PR_FALSE;
+	GetRememberPassword(&rememberPassword);
+	
+	if (rememberPassword)
+	{
+		SetPrefPassword((char *) aPassword);
+	}
+
+	m_password = aPassword;
+
+	return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgIncomingServer::GetPassword(char ** aPassword)
+{
+	nsresult rv = NS_OK;
+	PRBool rememberPassword = PR_FALSE;
+	// okay, here's the scoop for this messs...
+	// (1) if we have a password already, go ahead and use it!
+	// (2) if remember password is turned on, try reading in from the prefs and if we have one, go ahead
+	//	   and use it
+	// (3) otherwise prompt the user for a password and then remember that password in the server
+
+	if (m_password.IsEmpty())
+	{
+
+		// case (2)
+		GetRememberPassword(&rememberPassword);
+		if (rememberPassword)
+		{
+			nsXPIDLCString password;
+			GetPrefPassword(getter_Copies(password));
+			m_password = password;
+		}
+	}
+    
+	*aPassword = m_password.ToNewCString();
+    return rv;
+}
+
+NS_IMETHODIMP
+nsMsgIncomingServer::GetPasswordWithUI(const PRUnichar * aPromptMessage, char **aPassword) 
+{
+
+    nsXPIDLCString prefvalue;
+    GetPassword(getter_Copies(prefvalue));
+
+    nsresult rv = NS_OK;
+    if (m_password.IsEmpty()) {
+		// prompt the user for the password
+		NS_WITH_SERVICE(nsIPrompt, dialog, kNetSupportDialogCID, &rv);
+		if (NS_SUCCEEDED(rv))
+		{
+			PRUnichar * uniPassword;
+			PRBool okayValue = PR_TRUE;
+			dialog->PromptPassword(aPromptMessage, &uniPassword, &okayValue);
+				
+			if (!okayValue) // if the user pressed cancel, just return NULL;
+			{
+				*aPassword = nsnull;
+				return rv;
+			}
+
+			// we got a password back...so remember it
+			nsCString aCStr(uniPassword); 
+
+			SetPassword((const char *) aCStr);
+		} // if we got a prompt dialog
+	} // if the password is empty
+
+	*aPassword = m_password.ToNewCString();
+	return rv;
+}
+
+NS_IMETHODIMP
+nsMsgIncomingServer::SetDefaultLocalPath(nsIFileSpec *aDefaultLocalPath)
+{
+    nsresult rv;
+    nsXPIDLCString type;
+    GetType(getter_Copies(type));
+
+    nsCAutoString progid(NS_MSGPROTOCOLINFO_PROGID_PREFIX);
+    progid += type;
+
+    NS_WITH_SERVICE(nsIMsgProtocolInfo, protocolInfo, progid, &rv);
+    if (NS_FAILED(rv)) return rv;
+
+    rv = protocolInfo->SetDefaultLocalPath(aDefaultLocalPath);
+    return rv;
+}
+
+NS_IMETHODIMP
+nsMsgIncomingServer::GetLocalPath(nsIFileSpec **aLocalPath)
+{
+    nsresult rv;
+
+    // if the local path has already been set, use it
+    rv = GetFileValue("directory", aLocalPath);
+    if (NS_SUCCEEDED(rv) && *aLocalPath) return rv;
+    
+    // otherwise, create the path using.  note we are using the
+    // server key instead of the hostname
+    //
+    // TODO:  handle the case where they migrated a server of hostname "server4"
+    // and we create a server (with the account wizard) with key "server4"
+    // we'd get a collision.
+    // need to modify the code that creates keys to check for disk collision
+    nsXPIDLCString type;
+    GetType(getter_Copies(type));
+
+    nsCAutoString progid(NS_MSGPROTOCOLINFO_PROGID_PREFIX);
+    progid += type;
+
+    NS_WITH_SERVICE(nsIMsgProtocolInfo, protocolInfo, progid, &rv);
+    if (NS_FAILED(rv)) return rv;
+    
+    nsCOMPtr<nsIFileSpec> path;
+    rv = protocolInfo->GetDefaultLocalPath(getter_AddRefs(path));
+    if (NS_FAILED(rv)) return rv;
+    
+    path->CreateDir();
+    
+    nsXPIDLCString key;
+    rv = GetKey(getter_Copies(key));
+    if (NS_FAILED(rv)) return rv;
+    rv = path->AppendRelativeUnixPath(key);
+    if (NS_FAILED(rv)) return rv;
+    rv = SetLocalPath(path);
+    if (NS_FAILED(rv)) return rv;
+
+    *aLocalPath = path;
+    NS_ADDREF(*aLocalPath);
+
+    return NS_OK;
+}
+
+NS_IMETHODIMP
+nsMsgIncomingServer::SetLocalPath(nsIFileSpec *spec)
+{
+    if (spec) {
+        spec->CreateDir();
+        return SetFileValue("directory", spec);
+    }
+    else {
+        return NS_ERROR_NULL_POINTER;
+    }
+}
+
+NS_IMETHODIMP
+nsMsgIncomingServer::SetRememberPassword(PRBool value)
+{
+    if (value)
+        SetPrefPassword(m_password);
+    else
+        SetPrefPassword(nsnull);
+    return SetBoolValue("remember_password", value);
+}
+
+NS_IMETHODIMP
+nsMsgIncomingServer::GetRememberPassword(PRBool* value)
+{
+    return GetBoolValue("remember_password", value);
+}
+
+// use the convenience macros to implement the accessors
+NS_IMPL_SERVERPREF_STR(nsMsgIncomingServer, HostName, "hostname");
+NS_IMPL_SERVERPREF_STR(nsMsgIncomingServer, Username, "userName");
+NS_IMPL_SERVERPREF_STR(nsMsgIncomingServer, PrefPassword, "password");
+NS_IMPL_SERVERPREF_BOOL(nsMsgIncomingServer, DoBiff, "check_new_mail");
+NS_IMPL_SERVERPREF_INT(nsMsgIncomingServer, BiffMinutes, "check_time");
+NS_IMPL_SERVERPREF_STR(nsMsgIncomingServer, Type, "type");
+
+/* what was this called in 4.x? */
+// pref("mail.pop3_gets_new_mail",				true);
+
+NS_IMPL_SERVERPREF_BOOL(nsMsgIncomingServer, DownloadOnBiff, "download_on_biff");

mozilla/mailnews/base/util/nsMsgIncomingServer.h

@@ -0,0 +1,70 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#ifndef nsMsgIncomingServer_h__
+#define nsMsgIncomingServer_h__
+
+#include "nsIMsgIncomingServer.h"
+#include "nsIPref.h"
+#include "msgCore.h"
+#include "nsIFolder.h"
+#include "nsCOMPtr.h"
+
+class nsIMsgFolderCache;
+
+/*
+ * base class for nsIMsgIncomingServer - derive your class from here
+ * if you want to get some free implementation
+ * 
+ * this particular implementation is not meant to be used directly.
+ */
+
+class NS_MSG_BASE nsMsgIncomingServer : public nsIMsgIncomingServer {
+ public:
+  nsMsgIncomingServer();
+  virtual ~nsMsgIncomingServer();
+
+  NS_DECL_ISUPPORTS
+
+  NS_DECL_NSIMSGINCOMINGSERVER
+  
+private:
+  nsIPref *m_prefs;
+  char *m_serverKey;
+  nsCString m_password;
+  PRBool m_serverBusy;
+
+protected:
+  char *getPrefName(const char *serverKey, const char *pref);
+  char *getDefaultPrefName(const char *pref);
+
+  // these are private pref getters and setters for the password
+  // field. Callers should be using Get/Set Password
+  NS_IMETHOD GetPrefPassword(char * *aPassword);
+  NS_IMETHOD SetPrefPassword(const char * aPassword);
+  
+  nsCOMPtr <nsIFolder> m_rootFolder;
+  nsresult getDefaultCharPref(const char *pref, char **);
+  nsresult getDefaultBoolPref(const char *pref, PRBool *);
+  nsresult getDefaultIntPref(const char *pref, PRInt32 *);
+  
+  nsresult CreateRootFolder();
+
+};
+
+#endif // nsMsgIncomingServer_h__

mozilla/mailnews/base/util/nsMsgKeySet.h

@@ -0,0 +1,115 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#ifndef _nsMsgKeySet_H_
+#define _nsMsgKeySet_H_
+
+#include "msgCore.h"
+
+// nsMsgKeySet represents a set of articles.  Typically, it is the set of
+// read articles from a .newsrc file, but it can be used for other purposes
+// too.
+
+#if 0
+// If a MSG_NewsHost* is supplied to the creation routine, then that
+// MSG_NewsHost will be notified whenever a change is made to set.
+class MSG_NewsHost;
+#endif
+
+class NS_MSG_BASE nsMsgKeySet {
+public:
+  // Creates an empty set.
+  static nsMsgKeySet* Create(/* MSG_NewsHost* host = NULL*/);
+
+  // Creates a set from the list of numbers, as might be found in a
+  // newsrc file.
+  static nsMsgKeySet* Create(const char* str/* , MSG_NewsHost* host = NULL*/);
+  ~nsMsgKeySet();
+  
+  // FirstNonMember() returns the lowest non-member of the set that is
+  // greater than 0.
+  PRInt32 FirstNonMember();
+
+  // Output() converts to a string representation suitable for writing to a
+  // .newsrc file.  (The result must be freed by the caller using delete[].)
+  char* Output();		
+
+  // IsMember() returns whether the given article is a member of this set.
+  PRBool IsMember(PRInt32 art);
+  
+  // Add() adds the given article to the set.  (Returns 1 if a change was
+  // made, 0 if it was already there, and negative on error.)
+  int Add(PRInt32 art);
+  
+  // Remove() removes the given article from the set. 
+  int Remove(PRInt32 art);
+  
+  // AddRange() adds the (inclusive) given range of articles to the set.
+  int AddRange(PRInt32 first, PRInt32 last);
+  
+  // CountMissingInRange() takes an inclusive range of articles and returns
+  // the number of articles in that range which are not in the set.
+  PRInt32 CountMissingInRange(PRInt32 start, PRInt32 end);
+  
+  // FirstMissingRange() takes an inclusive range and finds the first range
+  // of articles that are not in the set.  If none, return zeros. 
+  int FirstMissingRange(PRInt32 min, PRInt32 max, PRInt32* first, PRInt32* last);
+  
+
+  // LastMissingRange() takes an inclusive range and finds the last range
+  // of articles that are not in the set.  If none, return zeros. 
+  int LastMissingRange(PRInt32 min, PRInt32 max, PRInt32* first, PRInt32* last);
+  
+  PRInt32 GetLastMember();
+  PRInt32 GetFirstMember();
+  void  SetLastMember(PRInt32 highWaterMark);
+  // For debugging only...
+  PRInt32 getLength() {return m_length;}
+  
+#ifdef DEBUG
+  static void RunTests();
+#endif
+
+protected:
+  nsMsgKeySet(/* MSG_NewsHost* host */);
+  nsMsgKeySet(const char* /* , MSG_NewsHost* host */);
+  PRBool Grow();
+  PRBool Optimize();
+  
+#ifdef DEBUG
+  static void test_decoder(const char*);
+  static void test_adder();
+  static void test_ranges();
+  static void test_member(PRBool with_cache);
+#endif
+  
+  PRInt32 *m_data;					/* the numbers composing the `chunks' */
+  PRInt32 m_data_size;				/* size of that malloc'ed block */
+  PRInt32 m_length;				/* active area */
+  
+  PRInt32 m_cached_value;			/* a potential set member, or -1 if unset*/
+  PRInt32 m_cached_value_index;		/* the index into `data' at which a search
+									   to determine whether `cached_value' was
+									   a member of the set ended. */
+#ifdef NEWSRC_DOES_HOST_STUFF
+  MSG_NewsHost* m_host;
+#endif
+};
+
+
+#endif /* _nsMsgKeySet_H_ */

mozilla/mailnews/base/util/nsMsgLineBuffer.cpp

@@ -0,0 +1,384 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "msgCore.h"
+#include "prlog.h"
+#include "nsMsgLineBuffer.h"
+
+#include "nsIInputStream.h" // used by nsMsgLineStreamBuffer
+
+MOZ_DECL_CTOR_COUNTER(nsByteArray);
+
+nsByteArray::nsByteArray()
+{
+	MOZ_COUNT_CTOR(nsByteArray);
+	m_buffer = NULL;
+	m_bufferSize = 0;
+	m_bufferPos = 0;
+}
+
+nsByteArray::~nsByteArray()
+{
+	MOZ_COUNT_DTOR(nsByteArray);
+	PR_FREEIF(m_buffer);
+}
+
+nsresult nsByteArray::GrowBuffer(PRUint32 desired_size, PRUint32 quantum)
+{
+	if (m_bufferSize < desired_size)
+	{
+		char *new_buf;
+		PRUint32 increment = desired_size - m_bufferSize;
+		if (increment < quantum) /* always grow by a minimum of N bytes */
+			increment = quantum;
+
+
+		new_buf = (m_buffer
+				 ? (char *) PR_REALLOC (m_buffer, (m_bufferSize + increment))
+				 : (char *) PR_MALLOC (m_bufferSize + increment));
+		if (! new_buf)
+			return NS_ERROR_OUT_OF_MEMORY;
+		m_buffer = new_buf;
+		m_bufferSize += increment;
+	}
+  return 0;
+}
+
+nsresult nsByteArray::AppendString(const char *string)
+{
+	PRUint32 strLength = (string) ? PL_strlen(string) : 0;
+	return AppendBuffer(string, strLength);
+
+}
+
+nsresult nsByteArray::AppendBuffer(const char *buffer, PRUint32 length)
+{
+	nsresult ret = NS_OK;
+	if (m_bufferPos + length > m_bufferSize)
+		ret = GrowBuffer(m_bufferPos + length, 1024);
+	if (ret == NS_OK)
+	{
+		memcpy(m_buffer + m_bufferPos, buffer, length);
+		m_bufferPos += length;
+	}
+	return ret;
+}
+
+MOZ_DECL_CTOR_COUNTER(nsMsgLineBuffer);
+
+nsMsgLineBuffer::nsMsgLineBuffer(nsMsgLineBufferHandler *handler, PRBool convertNewlinesP)
+{
+	MOZ_COUNT_CTOR(nsMsgLineBuffer);
+	m_handler = handler;
+	m_convertNewlinesP = convertNewlinesP;
+    m_lookingForCRLF = PR_TRUE;
+}
+
+nsMsgLineBuffer::~nsMsgLineBuffer()
+{
+	MOZ_COUNT_DTOR(nsMsgLineBuffer);
+}
+
+void
+nsMsgLineBuffer::SetLookingForCRLF(PRBool b)
+{
+  m_lookingForCRLF = b;
+}
+
+PRInt32	nsMsgLineBuffer::BufferInput(const char *net_buffer, PRInt32 net_buffer_size)
+{
+    int status = 0;
+    if (m_bufferPos > 0 && m_buffer && m_buffer[m_bufferPos - 1] == CR &&
+        net_buffer_size > 0 && net_buffer[0] != LF) {
+        /* The last buffer ended with a CR.  The new buffer does not start
+           with a LF.  This old buffer should be shipped out and discarded. */
+        PR_ASSERT(m_bufferSize > m_bufferPos);
+        if (m_bufferSize <= m_bufferPos) return -1;
+        status = ConvertAndSendBuffer();
+        if (status < 0) 
+			return status;
+        m_bufferPos = 0;
+    }
+    while (net_buffer_size > 0)
+	{
+        const char *net_buffer_end = net_buffer + net_buffer_size;
+        const char *newline = 0;
+        const char *s;
+        
+        
+        for (s = net_buffer; s < net_buffer_end; s++)
+		{
+          if (m_lookingForCRLF) {
+            /* Move forward in the buffer until the first newline.
+               Stop when we see CRLF, CR, or LF, or the end of the buffer.
+               *But*, if we see a lone CR at the *very end* of the buffer,
+               treat this as if we had reached the end of the buffer without
+               seeing a line terminator.  This is to catch the case of the
+               buffers splitting a CRLF pair, as in "FOO\r\nBAR\r" "\nBAZ\r\n".
+            */
+            if (*s == CR || *s == LF) {
+              newline = s;
+              if (newline[0] == CR) {
+                if (s == net_buffer_end - 1) {
+                  /* CR at end - wait for the next character. */
+                  newline = 0;
+                  break;
+                }
+                else if (newline[1] == LF) {
+                  /* CRLF seen; swallow both. */
+                  newline++;
+                }
+              }
+              newline++;
+              break;
+			}
+          }
+          else {
+            /* if not looking for a CRLF, stop at CR or LF.  (for example, when parsing the newsrc file).  this fixes #9896, where we'd lose the last line of anything we'd parse that used CR as the line break. */
+            if (*s == CR || *s == LF) {
+              newline = s;
+              newline++;
+              break;
+            }
+          }
+		}
+        
+        /* Ensure room in the net_buffer and append some or all of the current
+           chunk of data to it. */
+        {
+            const char *end = (newline ? newline : net_buffer_end);
+            PRUint32 desired_size = (end - net_buffer) + m_bufferPos + 1;
+            
+            if (desired_size >= m_bufferSize)
+            {
+                status = GrowBuffer (desired_size, 1024);
+                if (status < 0) 
+					return status;
+            }
+            memcpy (m_buffer + m_bufferPos, net_buffer, (end - net_buffer));
+            m_bufferPos += (end - net_buffer);
+        }
+        
+        /* Now m_buffer contains either a complete line, or as complete
+           a line as we have read so far.
+           
+           If we have a line, process it, and then remove it from `m_buffer'.
+           Then go around the loop again, until we drain the incoming data.
+           */
+        if (!newline)
+            return 0;
+        
+        status = ConvertAndSendBuffer();
+        if (status < 0) return status;
+        
+        net_buffer_size -= (newline - net_buffer);
+        net_buffer = newline;
+        m_bufferPos = 0;
+	}
+#ifdef DEBUG_bienvenu
+	printf("returning from buffer input m_bufferPos = %ld\n", m_bufferPos);
+#endif	
+    return 0;
+}
+
+PRInt32 nsMsgLineBuffer::HandleLine(char *line, PRUint32 line_length)
+{
+	NS_ASSERTION(PR_FALSE, "must override this method if you don't provide a handler");
+	return 0;
+}
+
+PRInt32 nsMsgLineBuffer::ConvertAndSendBuffer()
+{
+    /* Convert the line terminator to the native form.
+     */
+
+	char *buf = m_buffer;
+	PRInt32 length = m_bufferPos;
+
+    char* newline;
+    
+    PR_ASSERT(buf && length > 0);
+    if (!buf || length <= 0) 
+		return -1;
+    newline = buf + length;
+    
+    PR_ASSERT(newline[-1] == CR || newline[-1] == LF);
+    if (newline[-1] != CR && newline[-1] != LF)
+		return -1;
+    
+    if (!m_convertNewlinesP)
+	{
+	}
+#if (MSG_LINEBREAK_LEN == 1)
+    else if ((newline - buf) >= 2 &&
+             newline[-2] == CR &&
+             newline[-1] == LF)
+	{
+        /* CRLF -> CR or LF */
+        buf [length - 2] = MSG_LINEBREAK[0];
+        length--;
+	}
+    else if (newline > buf + 1 &&
+             newline[-1] != MSG_LINEBREAK[0])
+	{
+        /* CR -> LF or LF -> CR */
+        buf [length - 1] = MSG_LINEBREAK[0];
+	}
+#else
+    else if (((newline - buf) >= 2 && newline[-2] != CR) ||
+             ((newline - buf) >= 1 && newline[-1] != LF))
+	{
+        /* LF -> CRLF or CR -> CRLF */
+        length++;
+        buf[length - 2] = MSG_LINEBREAK[0];
+        buf[length - 1] = MSG_LINEBREAK[1];
+	}
+#endif
+    
+    return (m_handler) ? m_handler->HandleLine(buf, length) : HandleLine(buf, length);
+}
+
+// If there's still some data (non CRLF terminated) flush it out
+PRInt32 nsMsgLineBuffer::FlushLastLine()
+{
+	char *buf = m_buffer + m_bufferPos;
+	PRInt32 length = m_bufferPos - 1;
+	if (length > 0)
+		return (m_handler) ? m_handler->HandleLine(buf, length) : HandleLine(buf, length);
+	else
+		return 0;
+}
+
+///////////////////////////////////////////////////////////////////////////////////////////////////
+// This is a utility class used to efficiently extract lines from an input stream by buffering
+// read but unprocessed stream data in a buffer. 
+///////////////////////////////////////////////////////////////////////////////////////////////////
+
+nsMsgLineStreamBuffer::nsMsgLineStreamBuffer(PRUint32 aBufferSize, const char * aEndOfLineToken, 
+											 PRBool aAllocateNewLines, PRBool aEatCRLFs) 
+											: m_eatCRLFs(aEatCRLFs), m_allocateNewLines(aAllocateNewLines),
+											  m_endOfLineToken(aEndOfLineToken)
+{
+	NS_PRECONDITION(aBufferSize > 0, "invalid buffer size!!!");
+	m_dataBuffer = nsnull;
+	m_startPos = nsnull;
+
+	// used to buffer incoming data by ReadNextLineFromInput
+	if (aBufferSize > 0)
+	{
+		m_dataBuffer = (char *) PR_CALLOC(sizeof(char) * aBufferSize);
+		m_startPos = m_dataBuffer;
+	}
+
+	m_dataBufferSize = aBufferSize;
+}
+
+nsMsgLineStreamBuffer::~nsMsgLineStreamBuffer()
+{
+	PR_FREEIF(m_dataBuffer); // release our buffer...
+}
+
+// the design for this method has an inherit bug: if the length of the line is greater than the size of m_dataBufferSize, 
+// then we'll never find the next line because we can't hold the whole line in memory. 
+// aInputStream - the input stream we want to read a line from
+// aPauseForMoreData is returned as PR_TRUE if the stream does not yet contain a line and we must wait for more
+// data to come into the stream.
+
+// Note to people wishing to modify this function: Be *VERY CAREFUL* this is a critical function used by all of
+// our mail protocols including imap, nntp, and pop. If you screw it up, you could break a lot of stuff.....
+
+char * nsMsgLineStreamBuffer::ReadNextLine(nsIInputStream * aInputStream, PRUint32 &aNumBytesInLine, PRBool &aPauseForMoreData)
+{
+	// try to extract a line from m_inputBuffer. If we don't have an entire line, 
+	// then read more bytes out from the stream. If the stream is empty then wait
+	// on the monitor for more data to come in.
+
+	NS_PRECONDITION(m_startPos && m_dataBufferSize > 0, "invalid input arguments for read next line from input");
+	
+	// initialize out values
+	aPauseForMoreData = PR_FALSE;
+	aNumBytesInLine = 0;
+	char * endOfLine = nsnull;
+
+	PRUint32 numBytesInBuffer = PL_strlen(m_startPos);
+	
+	if (numBytesInBuffer > 0) // any data in our internal buffer?
+		endOfLine = PL_strstr(m_startPos, m_endOfLineToken); // see if we already have a line ending...
+
+	// it's possible that we got here before the first time we receive data from the server
+	// so aInputStream will be nsnull...
+	if (!endOfLine && aInputStream) // get some more data from the server
+	{
+		PRUint32 numBytesInStream = 0;
+		PRUint32 numBytesCopied = 0;
+		aInputStream->Available(&numBytesInStream);
+		// if the number of bytes we want to read from the stream, is greater than the number
+		// of bytes left in our buffer, then we need to shift the start pos and its contents
+		// down to the beginning of m_dataBuffer...
+		PRUint32 numFreeBytesInBuffer = (m_dataBuffer + m_dataBufferSize) - (m_startPos + numBytesInBuffer);
+		if (numBytesInStream >= numFreeBytesInBuffer)
+		{
+			nsCRT::memcpy(m_dataBuffer, m_startPos, numBytesInBuffer);
+			m_dataBuffer[numBytesInBuffer] = '\0'; // make sure the end of the buffer is terminated
+			m_startPos = m_dataBuffer; // update the new start position
+			// update the number of free bytes in the buffer
+			numFreeBytesInBuffer = m_dataBufferSize - numBytesInBuffer;
+		}
+
+		PRUint32 numBytesToCopy = PR_MIN(numFreeBytesInBuffer - 1 /* leave one for a null terminator */, numBytesInStream);
+		// read the data into the end of our data buffer
+		if (numBytesToCopy > 0)
+		{
+			aInputStream->Read(m_startPos + numBytesInBuffer, numBytesToCopy, &numBytesCopied);
+			m_startPos[numBytesInBuffer + numBytesCopied] = '\0';
+		}
+
+		// okay, now that we've tried to read in more data from the stream, look for another end of line 
+		// character 
+		endOfLine = PL_strstr(m_startPos, m_endOfLineToken);
+
+	}
+
+	// okay, now check again for endOfLine.
+	if (endOfLine)
+	{
+		if (!m_eatCRLFs)
+			endOfLine += PL_strlen(m_endOfLineToken); // count for CRLF
+
+		// PR_CALLOC zeros out the allocated line
+		char* newLine = (char*) PR_CALLOC(endOfLine-m_startPos+1);
+		if (!newLine)
+			return nsnull;
+
+		nsCRT::memcpy(newLine, m_startPos, endOfLine-m_startPos); // copy the string into the new line buffer
+		aNumBytesInLine = endOfLine - m_startPos;
+
+		if (m_eatCRLFs)
+			endOfLine += PL_strlen(m_endOfLineToken); // advance past CRLF if we haven't already done so...
+
+		// now we need to update the data buffer to go past the line we just read out. 
+		if (PL_strlen(endOfLine) <= 0) // if no more data in the buffer, then just zero out the buffer...
+			m_startPos[0] = '\0';
+		else  // advance 
+			m_startPos = endOfLine; // move us up to the end of the line
+		return newLine;
+	}
+
+	aPauseForMoreData = PR_TRUE;
+	return nsnull; // if we somehow got here. we don't have another line in the buffer yet...need to wait for more data...
+}

mozilla/mailnews/base/util/nsMsgLineBuffer.h

@@ -0,0 +1,113 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+#ifndef _nsMsgLineBuffer_H
+#define _nsMsgLineBuffer_H
+
+#include "msgCore.h"    // precompiled header...
+
+// I can't believe I have to have this stupid class, but I can't find
+// anything suitable (nsStrImpl might be, when its done). nsIByteBuffer
+// would do, if I had a stream for input, which I don't.
+
+class NS_MSG_BASE nsByteArray 
+{
+public:
+	nsByteArray();
+	virtual ~nsByteArray();
+	PRUint32	GetSize() {return m_bufferSize;}
+	PRUint32	GetBufferPos() {return m_bufferPos;}
+	nsresult	GrowBuffer(PRUint32 desired_size, PRUint32 quantum = 1024);
+	nsresult	AppendString(const char *string);
+	nsresult	AppendBuffer(const char *buffer, PRUint32 length);
+	void		ResetWritePos() {m_bufferPos = 0;}
+	char		*GetBuffer() {return m_buffer;}
+protected:
+	char		*m_buffer;
+	PRUint32	m_bufferSize;
+	PRUint32	m_bufferPos;	// write Pos in m_buffer - where the next byte should go.
+};
+
+
+class NS_MSG_BASE nsMsgLineBufferHandler : public nsByteArray
+{
+public:
+	virtual PRInt32 HandleLine(char *line, PRUint32 line_length) = 0;
+};
+
+class NS_MSG_BASE nsMsgLineBuffer : public nsByteArray
+{
+public:
+	nsMsgLineBuffer(nsMsgLineBufferHandler *handler, PRBool convertNewlinesP);
+
+	virtual ~nsMsgLineBuffer();
+	PRInt32	BufferInput(const char *net_buffer, PRInt32 net_buffer_size);
+	// Not sure why anyone cares, by NNTPHost seems to want to know the buf pos.
+	PRUint32	GetBufferPos() {return m_bufferPos;}
+
+	virtual PRInt32 HandleLine(char *line, PRUint32 line_length);
+	// flush last line, though it won't be CRLF terminated.
+	virtual PRInt32 FlushLastLine();
+protected:
+	nsMsgLineBuffer(PRBool convertNewlinesP);
+
+	PRInt32 ConvertAndSendBuffer();
+    void SetLookingForCRLF(PRBool b);
+
+	nsMsgLineBufferHandler *m_handler;
+	PRBool		m_convertNewlinesP;
+    PRBool      m_lookingForCRLF; 
+};
+
+// I'm adding this utility class here for lack of a better place. This utility class is similar to nsMsgLineBuffer
+// except it works from an input stream. It is geared towards efficiently parsing new lines out of a stream by storing
+// read but unprocessed bytes in a buffer. I envision the primary use of this to be our mail protocols such as imap, news and
+// pop which need to process line by line data being returned in the form of a proxied stream from the server.
+
+class nsIInputStream;
+
+class NS_MSG_BASE nsMsgLineStreamBuffer
+{
+public:
+	// aBufferSize -- size of the buffer you want us to use for buffering stream data
+	// aEndOfLinetoken -- The delimeter string to be used for determining the end of line. This 
+	//				      allows us to parse platform specific end of line endings by making it
+	//					  a parameter.
+	// aAllocateNewLines -- PR_TRUE if you want calls to ReadNextLine to allocate new memory for the line. 
+	//						if false, the char * returned is just a ptr into the buffer. Subsequent calls to
+	//						ReadNextLine will alter the data so your ptr only has a life time of a per call.
+	// aEatCRLFs  -- PR_TRUE if you don't want to see the CRLFs on the lines returned by ReadNextLine. 
+	//				 PR_FALSE if you do want to see them.
+	nsMsgLineStreamBuffer(PRUint32 aBufferSize, const char * aEndOfLineToken, PRBool aAllocateNewLines, PRBool aEatCRLFs = PR_TRUE); // specify the size of the buffer you want the class to use....
+	virtual ~nsMsgLineStreamBuffer();
+
+	// Caller must free the line returned using PR_Free
+	// aEndOfLinetoken -- delimeter used to denote the end of a line.
+	// aNumBytesInLine -- The number of bytes in the line returned
+	// aPauseForMoreData -- There is not enough data in the stream to make a line at this time...
+	char * ReadNextLine(nsIInputStream * aInputStream, PRUint32 &anumBytesInLine, PRBool &aPauseForMoreData);
+protected:
+	PRBool m_eatCRLFs;
+	PRBool m_allocateNewLines;
+	char * m_dataBuffer;
+	char * m_startPos;
+	const char * m_endOfLineToken;
+	PRUint32 m_dataBufferSize;
+};
+
+
+#endif

mozilla/mailnews/base/util/nsMsgMailNewsUrl.cpp

@@ -0,0 +1,399 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "msgCore.h"
+#include "nsMsgMailNewsUrl.h"
+#include "nsMsgBaseCID.h"
+#include "nsIMsgMailSession.h"
+#include "nsXPIDLString.h"
+
+static NS_DEFINE_CID(kUrlListenerManagerCID, NS_URLLISTENERMANAGER_CID);
+static NS_DEFINE_CID(kStandardUrlCID, NS_STANDARDURL_CID);
+static NS_DEFINE_CID(kMsgMailSessionCID, NS_MSGMAILSESSION_CID);
+
+nsMsgMailNewsUrl::nsMsgMailNewsUrl()
+{
+    NS_INIT_REFCNT();
+ 
+	// nsIURI specific state
+	m_errorMessage = nsnull;
+	m_runningUrl = PR_FALSE;
+	m_updatingFolder = PR_FALSE;
+
+	nsComponentManager::CreateInstance(kUrlListenerManagerCID, nsnull, nsCOMTypeInfo<nsIUrlListenerManager>::GetIID(), (void **) getter_AddRefs(m_urlListeners));
+	nsComponentManager::CreateInstance(kStandardUrlCID, nsnull, nsCOMTypeInfo<nsIURL>::GetIID(), (void **) getter_AddRefs(m_baseURL));
+}
+ 
+nsMsgMailNewsUrl::~nsMsgMailNewsUrl()
+{
+	PR_FREEIF(m_errorMessage);
+}
+  
+NS_IMPL_ADDREF(nsMsgMailNewsUrl);
+NS_IMPL_RELEASE(nsMsgMailNewsUrl);
+
+nsresult nsMsgMailNewsUrl::QueryInterface(const nsIID &aIID, void** aInstancePtr)
+{
+    if (NULL == aInstancePtr) {
+        return NS_ERROR_NULL_POINTER;
+    }
+    if (aIID.Equals(nsCOMTypeInfo<nsIURI>::GetIID())) {
+        *aInstancePtr = (void*) ((nsIURI*)this);
+        NS_ADDREF_THIS();
+        return NS_OK;
+    }
+	if (aIID.Equals(nsCOMTypeInfo<nsIURL>::GetIID())) {
+        *aInstancePtr = (void*) ((nsIURL*)this);
+        NS_ADDREF_THIS();
+        return NS_OK;
+    }
+	if (aIID.Equals(nsCOMTypeInfo<nsIMsgMailNewsUrl>::GetIID()))
+	{
+		*aInstancePtr = (void *) ((nsIMsgMailNewsUrl*) this);
+		NS_ADDREF_THIS();
+		return NS_OK;
+	}
+ 
+	if (aIID.Equals(nsCOMTypeInfo<nsISupports>::GetIID()))    
+	{
+		*aInstancePtr = (void *) ((nsIMsgMailNewsUrl*) this);
+		NS_ADDREF_THIS();
+		return NS_OK;
+	}
+#if defined(NS_DEBUG)
+    /*
+     * Check for the debug-only interface indicating thread-safety
+     */
+    static NS_DEFINE_IID(kIsThreadsafeIID, NS_ISTHREADSAFE_IID);
+    if (aIID.Equals(kIsThreadsafeIID)) {
+        return NS_OK;
+    }
+#endif
+    return NS_NOINTERFACE;
+}
+
+////////////////////////////////////////////////////////////////////////////////////
+// Begin nsIMsgMailNewsUrl specific support
+////////////////////////////////////////////////////////////////////////////////////
+
+nsresult nsMsgMailNewsUrl::GetUrlState(PRBool * aRunningUrl)
+{
+	if (aRunningUrl)
+		*aRunningUrl = m_runningUrl;
+
+	return NS_OK;
+}
+
+nsresult nsMsgMailNewsUrl::SetUrlState(PRBool aRunningUrl, nsresult aExitCode)
+{
+	m_runningUrl = aRunningUrl;
+	nsCOMPtr <nsIMsgStatusFeedback> statusFeedback;
+
+	if (NS_SUCCEEDED(GetStatusFeedback(getter_AddRefs(statusFeedback))) && statusFeedback)
+	{
+		if (m_runningUrl)
+			statusFeedback->StartMeteors();
+		else
+		{
+			statusFeedback->ShowProgress(0);
+			statusFeedback->StopMeteors();
+		}
+	}
+	if (m_urlListeners)
+	{
+		if (m_runningUrl)
+		{
+			m_urlListeners->OnStartRunningUrl(this);
+		}
+		else
+		{
+			m_urlListeners->OnStopRunningUrl(this, aExitCode);
+		}
+	}
+
+	return NS_OK;
+}
+
+nsresult nsMsgMailNewsUrl::RegisterListener (nsIUrlListener * aUrlListener)
+{
+	if (m_urlListeners)
+		m_urlListeners->RegisterListener(aUrlListener);
+	return NS_OK;
+}
+
+nsresult nsMsgMailNewsUrl::UnRegisterListener (nsIUrlListener * aUrlListener)
+{
+	if (m_urlListeners)
+		m_urlListeners->UnRegisterListener(aUrlListener);
+	return NS_OK;
+}
+
+nsresult nsMsgMailNewsUrl::SetErrorMessage (const char * errorMessage)
+{
+	// functionality has been moved to nsIMsgStatusFeedback
+	return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+nsresult nsMsgMailNewsUrl::GetErrorMessage (char ** errorMessage)
+{
+	// functionality has been moved to nsIMsgStatusFeedback
+	return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetServer(nsIMsgIncomingServer ** aIncomingServer)
+{
+	// mscott --> we could cache a copy of the server here....but if we did, we run
+	// the risk of leaking the server if any single url gets leaked....of course that
+	// shouldn't happen...but it could. so i'm going to look it up every time and
+	// we can look at caching it later.
+
+	nsXPIDLCString host;
+	nsXPIDLCString scheme;
+
+	nsresult rv = GetHost(getter_Copies(host));
+	rv = GetScheme(getter_Copies(scheme));
+    if (NS_SUCCEEDED(rv))
+    {
+        NS_WITH_SERVICE(nsIMsgMailSession, session, kMsgMailSessionCID, &rv); 
+        if (NS_FAILED(rv)) return rv;
+        
+        nsCOMPtr<nsIMsgAccountManager> accountManager;
+        rv = session->GetAccountManager(getter_AddRefs(accountManager));
+        if(NS_FAILED(rv)) return rv;
+        
+        nsCOMPtr<nsIMsgIncomingServer> server;
+        rv = accountManager->FindServer(GetUserName(),
+                                        host,
+                                        scheme,
+                                        aIncomingServer);
+    }
+
+    return rv;
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetStatusFeedback(nsIMsgStatusFeedback *aMsgFeedback)
+{
+	if (aMsgFeedback)
+		m_statusFeedback = do_QueryInterface(aMsgFeedback);
+	return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetStatusFeedback(nsIMsgStatusFeedback **aMsgFeedback)
+{
+	nsresult rv = NS_OK;
+	// note: it is okay to return a null status feedback and not return an error
+	// it's possible the url really doesn't have status feedback
+	if (!m_statusFeedback)
+	{
+		NS_WITH_SERVICE(nsIMsgMailSession, mailSession, kMsgMailSessionCID, &rv); 
+
+		if(NS_SUCCEEDED(rv))
+			mailSession->GetTemporaryMsgStatusFeedback(getter_AddRefs(m_statusFeedback));
+	}
+	if (aMsgFeedback)
+	{
+		*aMsgFeedback = m_statusFeedback;
+		NS_IF_ADDREF(*aMsgFeedback);
+	}
+	else
+		rv = NS_ERROR_NULL_POINTER;
+	return rv;
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetUpdatingFolder(PRBool *aResult)
+{
+	if (!aResult)
+		return NS_ERROR_NULL_POINTER;
+	*aResult = m_updatingFolder;
+	return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetUpdatingFolder(PRBool updatingFolder)
+{
+	m_updatingFolder = updatingFolder;
+	return NS_OK;
+}
+
+
+////////////////////////////////////////////////////////////////////////////////////
+// End nsIMsgMailNewsUrl specific support
+////////////////////////////////////////////////////////////////////////////////////
+
+////////////////////////////////////////////////////////////////////////////////////
+// Begin nsIURI support
+////////////////////////////////////////////////////////////////////////////////////
+
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetSpec(char * *aSpec)
+{
+	return m_baseURL->GetSpec(aSpec);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetSpec(const char * aSpec)
+{
+	return m_baseURL->SetSpec(aSpec);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetScheme(char * *aScheme)
+{
+	return m_baseURL->GetScheme(aScheme);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetScheme(const char * aScheme)
+{
+	return m_baseURL->SetScheme(aScheme);
+}
+
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetPreHost(char * *aPreHost)
+{
+	return m_baseURL->GetPreHost(aPreHost);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetPreHost(const char * aPreHost)
+{
+	return m_baseURL->SetPreHost(aPreHost);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetHost(char * *aHost)
+{
+	return m_baseURL->GetHost(aHost);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetHost(const char * aHost)
+{
+	return m_baseURL->SetHost(aHost);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetPort(PRInt32 *aPort)
+{
+	return m_baseURL->GetPort(aPort);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetPort(PRInt32 aPort)
+{
+	return m_baseURL->SetPort(aPort);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetPath(char * *aPath)
+{
+	return m_baseURL->GetPath(aPath);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetPath(const char * aPath)
+{
+	return m_baseURL->SetPath(aPath);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::Equals(nsIURI *other, PRBool *_retval)
+{
+	return m_baseURL->Equals(other, _retval);
+}
+
+
+NS_IMETHODIMP nsMsgMailNewsUrl::Clone(nsIURI **_retval)
+{
+	return m_baseURL->Clone(_retval);
+}	
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetRelativePath(const char *i_RelativePath)
+{
+	return m_baseURL->SetRelativePath(i_RelativePath);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetDirectory(char * *aDirectory)
+{
+	return m_baseURL->GetDirectory(aDirectory);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetDirectory(const char *aDirectory)
+{
+
+	return m_baseURL->SetDirectory(aDirectory);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetFileName(char * *aFileName)
+{
+	return m_baseURL->GetFileName(aFileName);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetFileBaseName(char * *aFileBaseName)
+{
+    return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetFileBaseName(const char * aFileBaseName)
+{
+    return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetFileExtension(char * *aFileExtension)
+{
+    return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetFileExtension(const char * aFileExtension)
+{
+    return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetFileName(const char * aFileName)
+{
+	return m_baseURL->SetFileName(aFileName);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetParam(char * *aParam)
+{
+	return m_baseURL->GetParam(aParam);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetParam(const char *aParam)
+{
+	return m_baseURL->SetParam(aParam);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetQuery(char * *aQuery)
+{
+	return m_baseURL->GetQuery(aQuery);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetQuery(const char *aQuery)
+{
+	return m_baseURL->SetQuery(aQuery);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetRef(char * *aRef)
+{
+	return m_baseURL->GetRef(aRef);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetRef(const char *aRef)
+{
+	return m_baseURL->SetRef(aRef);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::GetFilePath(char **o_DirFile)
+{
+	return m_baseURL->GetFilePath(o_DirFile);
+}
+
+NS_IMETHODIMP nsMsgMailNewsUrl::SetFilePath(const char *i_DirFile)
+{
+	return m_baseURL->SetFilePath(i_DirFile);
+}
+

mozilla/mailnews/base/util/nsMsgMailNewsUrl.h

@@ -0,0 +1,66 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#ifndef nsMsgMailNewsUrl_h___
+#define nsMsgMailNewsUrl_h___
+
+#include "nscore.h"
+#include "nsISupports.h"
+#include "nsIUrlListener.h"
+#include "nsIUrlListenerManager.h"
+#include "nsIMsgStatusFeedback.h"
+#include "nsCOMPtr.h"
+#include "nsIMsgMailNewsUrl.h"
+#include "nsIURL.h"
+
+///////////////////////////////////////////////////////////////////////////////////
+// Okay, I found that all of the mail and news url interfaces needed to support
+// several common interfaces (in addition to those provided through nsIURI). 
+// So I decided to group them all in this implementation so we don't have to
+// duplicate the code.
+//
+//////////////////////////////////////////////////////////////////////////////////
+
+class NS_MSG_BASE nsMsgMailNewsUrl : public nsIMsgMailNewsUrl
+{
+public:
+	nsMsgMailNewsUrl();
+
+	NS_DECL_ISUPPORTS
+    NS_DECL_NSIMSGMAILNEWSURL
+    NS_DECL_NSIURI
+    NS_DECL_NSIURL
+
+protected:
+	virtual ~nsMsgMailNewsUrl();
+
+	// a helper function I needed from derived urls...
+	virtual const char * GetUserName() = 0;
+
+	nsCOMPtr<nsIURL> m_baseURL;
+	nsCOMPtr<nsIMsgStatusFeedback> m_statusFeedback;
+	char		*m_errorMessage;
+	PRBool		m_runningUrl;
+	PRBool		m_updatingFolder;
+
+	// manager of all of current url listeners....
+	nsCOMPtr<nsIUrlListenerManager> m_urlListeners;
+};
+
+
+#endif /* nsMsgMailNewsUrl_h___ */

mozilla/mailnews/base/util/nsMsgProtocol.cpp

@@ -0,0 +1,369 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "msgCore.h"
+#include "nsMsgProtocol.h"
+#include "nsIMsgMailNewsUrl.h"
+#include "nsISocketTransportService.h"
+#include "nsXPIDLString.h"
+#include "nsSpecialSystemDirectory.h"
+#include "nsILoadGroup.h"
+#include "nsIIOService.h"
+
+static NS_DEFINE_CID(kSocketTransportServiceCID, NS_SOCKETTRANSPORTSERVICE_CID);
+static NS_DEFINE_CID(kIOServiceCID, NS_IOSERVICE_CID);
+
+NS_IMPL_ISUPPORTS3(nsMsgProtocol, nsIStreamListener, nsIStreamObserver, nsIChannel)
+
+nsMsgProtocol::nsMsgProtocol()
+{
+	NS_INIT_REFCNT();
+	m_flags = 0;
+	m_startPosition = 0;
+	m_readCount = 0;
+	m_socketIsOpen = PR_FALSE;
+		
+	m_tempMsgFileSpec = nsSpecialSystemDirectory(nsSpecialSystemDirectory::OS_TemporaryDirectory);
+	m_tempMsgFileSpec += "tempMessage.eml";
+}
+
+nsMsgProtocol::~nsMsgProtocol()
+{}
+
+nsresult nsMsgProtocol::OpenNetworkSocket(nsIURI * aURL) // open a connection on this url
+{
+	nsresult rv = NS_OK;
+	nsXPIDLCString hostName;
+	PRInt32 port = 0;
+
+	m_readCount = -1; // with socket connections we want to read as much data as arrives
+	m_startPosition = 0;
+
+    NS_WITH_SERVICE(nsISocketTransportService, socketService, kSocketTransportServiceCID, &rv);
+
+	if (NS_SUCCEEDED(rv) && aURL)
+	{
+		aURL->GetPort(&port);
+		aURL->GetHost(getter_Copies(hostName));
+
+		rv = socketService->CreateTransport(hostName, port, nsnull, getter_AddRefs(m_channel));
+		if (NS_SUCCEEDED(rv) && m_channel)
+		{
+			m_socketIsOpen = PR_FALSE;
+			rv = SetupTransportState();
+		}
+	}
+
+	return rv;
+}
+
+nsresult nsMsgProtocol::OpenFileSocket(nsIURI * aURL, const nsFileSpec * aFileSpec, PRUint32 aStartPosition, PRInt32 aReadCount)
+{
+	// mscott - file needs to be encoded directly into aURL. I should be able to get
+	// rid of this method completely.
+
+	nsresult rv = NS_OK;
+	m_startPosition = aStartPosition;
+	m_readCount = aReadCount;
+
+    NS_WITH_SERVICE(nsIIOService, netService, kIOServiceCID, &rv);
+	if (NS_SUCCEEDED(rv) && aURL)
+	{
+		// extract the file path from the uri...
+		nsXPIDLCString filePath;
+		aURL->GetPath(getter_Copies(filePath));
+		char * urlSpec = PR_smprintf("file://%s", (const char *) filePath);
+
+		rv = netService->NewChannel("Load", urlSpec, 
+                                    nsnull,     // null base URI
+                                    nsnull,     // null load group
+                                    nsnull,     // null eventsink getter
+                                    getter_AddRefs(m_channel));
+		PR_FREEIF(urlSpec);
+
+		if (NS_SUCCEEDED(rv) && m_channel)
+		{
+			m_socketIsOpen = PR_FALSE;
+			// rv = SetupTransportState();
+		}
+	}
+
+	return rv;
+}
+
+nsresult nsMsgProtocol::SetupTransportState()
+{
+	nsresult rv = NS_OK;
+
+	if (!m_socketIsOpen && m_channel)
+	{
+		rv = m_channel->OpenOutputStream(0 /* start position */, getter_AddRefs(m_outputStream));
+
+		NS_ASSERTION(NS_SUCCEEDED(rv), "unable to create an output stream");
+		// we want to open the stream 
+	} // if m_transport
+
+	return rv;
+}
+
+nsresult nsMsgProtocol::CloseSocket()
+{
+	// release all of our socket state
+	m_socketIsOpen = PR_FALSE;
+	m_outputStream = null_nsCOMPtr();
+	m_channel = null_nsCOMPtr();
+
+	return NS_OK;
+}
+
+/*
+ * Writes the data contained in dataBuffer into the current output stream. It also informs
+ * the transport layer that this data is now available for transmission.
+ * Returns a positive number for success, 0 for failure (not all the bytes were written to the
+ * stream, etc). We need to make another pass through this file to install an error system (mscott)
+ */
+
+PRInt32 nsMsgProtocol::SendData(nsIURI * aURL, const char * dataBuffer)
+{
+	PRUint32 writeCount = 0; 
+	PRInt32 status = 0; 
+
+//	NS_PRECONDITION(m_outputStream, "oops....we don't have an output stream...how did that happen?");
+	if (dataBuffer && m_outputStream)
+	{
+		status = m_outputStream->Write(dataBuffer, PL_strlen(dataBuffer), &writeCount);
+	}
+
+	return status;
+}
+
+// Whenever data arrives from the connection, core netlib notifices the protocol by calling
+// OnDataAvailable. We then read and process the incoming data from the input stream. 
+NS_IMETHODIMP nsMsgProtocol::OnDataAvailable(nsIChannel * /* aChannel */, nsISupports *ctxt, nsIInputStream *inStr, PRUint32 sourceOffset, PRUint32 count)
+{
+	// right now, this really just means turn around and churn through the state machine
+	nsCOMPtr<nsIURI> uri = do_QueryInterface(ctxt);
+	return ProcessProtocolState(uri, inStr, sourceOffset, count);
+}
+
+NS_IMETHODIMP nsMsgProtocol::OnStartRequest(nsIChannel * aChannel, nsISupports *ctxt)
+{
+	nsresult rv = NS_OK;
+	nsCOMPtr <nsIMsgMailNewsUrl> aMsgUrl = do_QueryInterface(ctxt, &rv);
+	if (NS_SUCCEEDED(rv) && aMsgUrl)
+		rv = aMsgUrl->SetUrlState(PR_TRUE, NS_OK);
+
+	// if we are set up as a channel, we should notify our channel listener that we are starting...
+	// so pass in ourself as the channel and not the underlying socket or file channel the protocol
+	// happens to be using
+	if (m_channelListener)
+		rv = m_channelListener->OnStartRequest(this, m_channelContext);
+
+	return rv;
+}
+
+// stop binding is a "notification" informing us that the stream associated with aURL is going away. 
+NS_IMETHODIMP nsMsgProtocol::OnStopRequest(nsIChannel * aChannel, nsISupports *ctxt, nsresult aStatus, const PRUnichar* aMsg)
+{
+	nsresult rv = NS_OK;
+	nsCOMPtr <nsIMsgMailNewsUrl> aMsgUrl = do_QueryInterface(ctxt, &rv);
+	if (NS_SUCCEEDED(rv) && aMsgUrl)
+		rv = aMsgUrl->SetUrlState(PR_FALSE, aStatus);
+
+	// if we are set up as a channel, we should notify our channel listener that we are starting...
+	// so pass in ourself as the channel and not the underlying socket or file channel the protocol
+	// happens to be using
+	if (m_channelListener)
+		rv = m_channelListener->OnStopRequest(this, m_channelContext, aStatus, aMsg);
+
+	return rv;
+}
+
+nsresult nsMsgProtocol::LoadUrl(nsIURI * aURL, nsISupports * aConsumer)
+{
+	// okay now kick us off to the next state...
+	// our first state is a process state so drive the state machine...
+	nsresult rv = NS_OK;
+	nsCOMPtr <nsIMsgMailNewsUrl> aMsgUrl = do_QueryInterface(aURL);
+
+	if (NS_SUCCEEDED(rv))
+	{
+		rv = aMsgUrl->SetUrlState(PR_TRUE, NS_OK); // set the url as a url currently being run...
+
+    // if the url is given a stream consumer then we should use it to forward calls to...
+    if (!m_channelListener && aConsumer) // if we don't have a registered listener already
+    {
+      m_channelListener = do_QueryInterface(aConsumer);
+      if (!m_channelContext)
+        m_channelContext = do_QueryInterface(aURL);
+    }
+
+		if (!m_socketIsOpen)
+		{
+			nsCOMPtr<nsISupports> urlSupports = do_QueryInterface(aURL);
+
+			// put us in a state where we are always notified of incoming data
+			m_channel->AsyncRead(m_startPosition, m_readCount, urlSupports ,this /* stream observer */);
+			m_socketIsOpen = PR_TRUE; // mark the channel as open
+		} // if we got an event queue service
+		else  // the connection is already open so we should begin processing our new url...
+			rv = ProcessProtocolState(aURL, nsnull, 0, 0); 
+	}
+
+	return rv;
+}
+
+///////////////////////////////////////////////////////////////////////
+// The rest of this file is mostly nsIChannel mumbo jumbo stuff
+///////////////////////////////////////////////////////////////////////
+
+nsresult nsMsgProtocol::SetUrl(nsIURI * aURL)
+{
+	m_url = dont_QueryInterface(aURL);
+	return NS_OK;
+}
+
+nsresult nsMsgProtocol::SetLoadGroup(nsILoadGroup * aLoadGroup)
+{
+	m_loadGroup = dont_QueryInterface(aLoadGroup);
+	return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgProtocol::GetURI(nsIURI * *aURI)
+{
+	nsresult rv = NS_OK;
+	if (aURI)
+	{
+		if (m_url)
+			rv = m_url->QueryInterface(NS_GET_IID(nsIURI), (void **) aURI);
+		else
+			*aURI = nsnull;
+	}
+	else
+		rv = NS_ERROR_NULL_POINTER;
+	return rv;
+}
+ 
+NS_IMETHODIMP nsMsgProtocol::OpenInputStream(PRUint32 startPosition, PRInt32 readCount, nsIInputStream **_retval)
+{
+	return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgProtocol::OpenOutputStream(PRUint32 startPosition, nsIOutputStream **_retval)
+{
+	return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgProtocol::AsyncOpen(nsIStreamObserver *observer, nsISupports* ctxt)
+{
+    return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgProtocol::AsyncRead(PRUint32 startPosition, PRInt32 readCount, nsISupports *ctxt, nsIStreamListener *listener)
+{
+	// set the stream listener and then load the url
+	m_channelContext = ctxt;
+	m_channelListener = listener;
+
+	// the following load group code is completely bogus....
+	nsresult rv = NS_OK;
+	if (m_loadGroup)
+	{
+		nsCOMPtr<nsILoadGroupListenerFactory> factory;
+		//
+		// Create a load group "proxy" listener...
+		//
+		rv = m_loadGroup->GetGroupListenerFactory(getter_AddRefs(factory));
+		if (factory) 
+		{
+			nsCOMPtr<nsIStreamListener> newListener;
+			rv = factory->CreateLoadGroupListener(m_channelListener, getter_AddRefs(newListener));
+			if (NS_SUCCEEDED(rv)) 
+				m_channelListener = newListener;
+		}
+	} // if aLoadGroup
+
+	return LoadUrl(m_url, nsnull);
+}
+
+NS_IMETHODIMP nsMsgProtocol::AsyncWrite(nsIInputStream *fromStream, PRUint32 startPosition, PRInt32 writeCount, nsISupports *ctxt, nsIStreamObserver *observer)
+{
+	return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgProtocol::GetLoadAttributes(nsLoadFlags *aLoadAttributes)
+{
+	return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgProtocol::SetLoadAttributes(nsLoadFlags aLoadAttributes)
+{
+	return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgProtocol::GetContentType(char * *aContentType)
+{
+	*aContentType = nsCRT::strdup("message/rfc822");
+	return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgProtocol::GetContentLength(PRInt32 * aContentLength)
+{
+  *aContentLength = -1;
+  return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgProtocol::GetOwner(nsISupports * *aPrincipal)
+{
+	return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgProtocol::SetOwner(nsISupports * aPrincipal)
+{
+	return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgProtocol::GetLoadGroup(nsILoadGroup * *aLoadGroup)
+{
+	return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+////////////////////////////////////////////////////////////////////////////////
+// From nsIRequest
+////////////////////////////////////////////////////////////////////////////////
+
+NS_IMETHODIMP nsMsgProtocol::IsPending(PRBool *result)
+{
+    *result = PR_TRUE;
+    return NS_OK; 
+}
+
+NS_IMETHODIMP nsMsgProtocol::Cancel()
+{
+    return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgProtocol::Suspend()
+{
+    return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgProtocol::Resume()
+{
+    return NS_ERROR_NOT_IMPLEMENTED;
+}

mozilla/mailnews/base/util/nsMsgProtocol.h

@@ -0,0 +1,108 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#ifndef nsMsgProtocol_h__
+#define nsMsgProtocol_h__
+
+#include "nsIStreamListener.h"
+#include "nsIInputStream.h"
+#include "nsIOutputStream.h"
+#include "nsIEventQueue.h"
+#include "nsIChannel.h"
+#include "nsIURL.h"
+#include "nsILoadGroup.h"
+#include "nsCOMPtr.h"
+
+// This is a helper class used to encapsulate code shared between all of the
+// mailnews protocol objects (imap, news, pop, smtp, etc.) In particular,
+// it unifies the core networking code for the protocols. My hope is that
+// this will make unification with Necko easier as we'll only have to change
+// this class and not all of the mailnews protocols.
+class NS_MSG_BASE nsMsgProtocol : public nsIStreamListener, public nsIChannel
+{
+public:
+	nsMsgProtocol();
+	virtual ~nsMsgProtocol();
+
+	NS_DECL_ISUPPORTS
+	// nsIChannel support
+	NS_DECL_NSICHANNEL
+	NS_DECL_NSIREQUEST
+  
+  NS_DECL_NSISTREAMLISTENER
+  NS_DECL_NSISTREAMOBSERVER
+
+	// LoadUrl -- A protocol typically overrides this function, sets up any local state for the url and
+	// then calls the base class which opens the socket if it needs opened. If the socket is 
+	// already opened then we just call ProcessProtocolState to start the churning process.
+	// aConsumer is the consumer for the url. It can be null if this argument is not appropriate
+	virtual nsresult LoadUrl(nsIURI * aURL, nsISupports * aConsumer = nsnull);
+
+	virtual nsresult SetUrl(nsIURI * aURL); // sometimes we want to set the url before we load it
+	virtual nsresult SetLoadGroup(nsILoadGroup * aLoadGroup);
+
+	// Flag manipulators
+	PRBool TestFlag  (PRUint32 flag) {return flag & m_flags;}
+	void   SetFlag   (PRUint32 flag) { m_flags |= flag; }
+	void   ClearFlag (PRUint32 flag) { m_flags &= ~flag; }
+
+protected:
+	// methods for opening and closing a socket with core netlib....
+	// mscott -okay this is lame. I should break this up into a file protocol and a socket based
+	// protocool class instead of cheating and putting both methods here...
+	virtual nsresult OpenNetworkSocket(nsIURI * aURL); // open a connection on this url
+	virtual nsresult OpenFileSocket(nsIURI * aURL, const nsFileSpec * aFileSpec, PRUint32 aStartPosition, PRInt32 aReadCount); // used to open a file socket connection
+
+	// a Protocol typically overrides this method. They free any of their own connection state and then
+	// they call up into the base class to free the generic connection objects
+	virtual nsresult CloseSocket(); 
+
+	virtual nsresult SetupTransportState(); // private method used by OpenNetworkSocket and OpenFileSocket
+
+	// ProcessProtocolState - This is the function that gets churned by calls to OnDataAvailable. 
+	// As data arrives on the socket, OnDataAvailable calls ProcessProtocolState.
+	
+	virtual nsresult ProcessProtocolState(nsIURI * url, nsIInputStream * inputStream, 
+									      PRUint32 sourceOffset, PRUint32 length) = 0;
+
+	// SendData -- Writes the data contained in dataBuffer into the current output stream. 
+	// It also informs the transport layer that this data is now available for transmission.
+	// Returns a positive number for success, 0 for failure (not all the bytes were written to the
+	// stream, etc). 
+	virtual PRInt32 SendData(nsIURI * aURL, const char * dataBuffer);
+
+	// Ouput stream for writing commands to the socket
+	nsCOMPtr<nsIChannel>		m_channel; 
+	nsCOMPtr<nsIOutputStream>	m_outputStream;   // this will be obtained from the transport interface
+
+	PRBool	  m_socketIsOpen; // mscott: we should look into keeping this state in the nsSocketTransport...
+							  // I'm using it to make sure I open the socket the first time a URL is loaded into the connection
+	PRUint32	m_flags; // used to store flag information
+	PRUint32	m_startPosition;
+	PRInt32		m_readCount;
+
+	nsFileSpec	m_tempMsgFileSpec;  // we currently have a hack where displaying a msg involves writing it to a temp file first
+
+	// the following is a catch all for nsIChannel related data
+	nsCOMPtr<nsIURI>  m_url; // the running url
+	nsCOMPtr<nsIStreamListener> m_channelListener;
+	nsCOMPtr<nsISupports>		m_channelContext;
+	nsCOMPtr<nsILoadGroup>		m_loadGroup;
+};
+
+#endif /* nsMsgProtocol_h__ */

mozilla/mailnews/base/util/nsMsgTxn.cpp

@@ -0,0 +1,99 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998, 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "nsMsgTxn.h"
+static NS_DEFINE_IID(kISupportsIID, NS_ISUPPORTS_IID);
+static NS_DEFINE_IID(kITransactionIID, NS_ITRANSACTION_IID);
+
+NS_IMPL_ADDREF(nsMsgTxn)
+NS_IMPL_RELEASE(nsMsgTxn)
+
+// note that aEditor is not refcounted
+nsMsgTxn::nsMsgTxn()
+{
+  NS_INIT_REFCNT();
+}
+
+nsMsgTxn::~nsMsgTxn()
+{
+}
+
+NS_IMETHODIMP nsMsgTxn::Do(void)
+{
+  return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgTxn::GetIsTransient(PRBool *aIsTransient)
+{
+  if (nsnull!=aIsTransient)
+    *aIsTransient = PR_FALSE;
+  else
+	  return NS_ERROR_NULL_POINTER;
+  return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgTxn::Merge(PRBool *aDidMerge, nsITransaction *aTransaction)
+{
+  return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgTxn::Write(nsIOutputStream *aOutputStream)
+{
+  return NS_ERROR_NOT_IMPLEMENTED;
+}
+
+NS_IMETHODIMP nsMsgTxn::GetUndoString(nsString *aString)
+{
+  if (nsnull!=aString)
+    *aString="Undo";
+  else
+	  return NS_ERROR_NULL_POINTER;
+  return NS_OK;
+}
+
+NS_IMETHODIMP nsMsgTxn::GetRedoString(nsString *aString)
+{
+  if (nsnull!=aString)
+    *aString="Redo";
+  else
+	  return NS_ERROR_NULL_POINTER;
+  return NS_OK;
+}
+
+NS_IMETHODIMP
+nsMsgTxn::QueryInterface(REFNSIID aIID, void** aInstancePtr)
+{
+  if (NULL == aInstancePtr) {
+    return NS_ERROR_NULL_POINTER;
+  }
+  if (aIID.Equals(kISupportsIID)) {
+    *aInstancePtr = (void*)(nsISupports*)this;
+    NS_ADDREF_THIS();
+    return NS_OK;
+  }
+  if (aIID.Equals(kITransactionIID)) {
+    *aInstancePtr = (void*)(nsITransaction*)this;
+    NS_ADDREF_THIS();
+    return NS_OK;
+  }
+  *aInstancePtr = 0;
+  return NS_NOINTERFACE;
+}
+
+
+

mozilla/mailnews/base/util/nsMsgTxn.h

@@ -0,0 +1,57 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998, 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#ifndef nsMsgTxn_h__
+#define nsMsgTxn_h__
+
+#include "nsITransaction.h"
+#include "msgCore.h"
+
+#define NS_MESSAGETRANSACTION_IID \
+{ /* da621b30-1efc-11d3-abe4-00805f8ac968 */ \
+    0xda621b30, 0x1efc, 0x11d3, \
+	{ 0xab, 0xe4, 0x00, 0x80, 0x5f, 0x8a, 0xc9, 0x68 } }
+/**
+ * base class for all message undo/redo transactions.
+ */
+class NS_MSG_BASE nsMsgTxn : public nsITransaction
+{
+    NS_DECL_ISUPPORTS 
+
+    nsMsgTxn();
+    virtual ~nsMsgTxn();
+
+    NS_IMETHOD Do(void);
+    
+    NS_IMETHOD Undo(void) = 0;
+    
+    NS_IMETHOD Redo(void) = 0;
+    
+    NS_IMETHOD GetIsTransient(PRBool *aIsTransient);
+
+    NS_IMETHOD Merge(PRBool *aDidMerge, nsITransaction *aTransaction);
+
+    NS_IMETHOD Write(nsIOutputStream *aOutputStream);
+
+    NS_IMETHOD GetUndoString(nsString *aString);
+
+    NS_IMETHOD GetRedoString(nsString *aString);
+
+};
+
+#endif

mozilla/mailnews/base/util/nsMsgUtils.cpp

@@ -0,0 +1,326 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "msgCore.h"
+#include "nsIMessage.h"
+#include "nsIMsgHdr.h"
+#include "nsMsgUtils.h"
+#include "nsString.h"
+#include "nsFileSpec.h"
+#include "nsIServiceManager.h"
+#include "nsCOMPtr.h"
+#include "nsString.h"
+#include "nsIImapUrl.h"
+#include "nsIMailboxUrl.h"
+#include "nsINntpUrl.h"
+#include "nsMsgNewsCID.h"
+#include "nsMsgLocalCID.h"
+#include "nsMsgBaseCID.h"
+#include "nsMsgImapCID.h"
+
+static NS_DEFINE_CID(kImapUrlCID, NS_IMAPURL_CID);
+static NS_DEFINE_CID(kCMailboxUrl, NS_MAILBOXURL_CID);
+static NS_DEFINE_CID(kCNntpUrlCID, NS_NNTPURL_CID);
+
+#if defined(DEBUG_sspitzer_) || defined(DEBUG_seth_)
+#define DEBUG_NS_MsgHashIfNecessary 1
+#endif
+
+nsresult GetMessageServiceProgIDForURI(const char *uri, nsString &progID)
+{
+
+	nsresult rv = NS_OK;
+	//Find protocol
+	nsString uriStr = uri;
+	PRInt32 pos = uriStr.FindChar(':');
+	if(pos == -1)
+		return NS_ERROR_FAILURE;
+	nsString protocol;
+	uriStr.Left(protocol, pos);
+
+	//Build message service progid
+	progID = "component://netscape/messenger/messageservice;type=";
+	progID += protocol;
+
+	return rv;
+}
+
+nsresult GetMessageServiceFromURI(const char *uri, nsIMsgMessageService **messageService)
+{
+
+	nsAutoString progID;
+	nsresult rv;
+
+	rv = GetMessageServiceProgIDForURI(uri, progID);
+
+	if(NS_SUCCEEDED(rv))
+	{
+		rv = nsServiceManager::GetService((const char *) nsCAutoString(progID), nsCOMTypeInfo<nsIMsgMessageService>::GetIID(),
+		           (nsISupports**)messageService, nsnull);
+	}
+
+	return rv;
+}
+
+
+nsresult ReleaseMessageServiceFromURI(const char *uri, nsIMsgMessageService *messageService)
+{
+	nsAutoString progID;
+	nsresult rv;
+
+	rv = GetMessageServiceProgIDForURI(uri, progID);
+	if(NS_SUCCEEDED(rv))
+		rv = nsServiceManager::ReleaseService(nsCAutoString(progID), messageService);
+	return rv;
+}
+
+
+nsresult CreateStartupUrl(char *uri, nsIURI** aUrl)
+{
+    nsresult rv = NS_ERROR_NULL_POINTER;
+    if (!uri || !*uri || !aUrl) return rv;
+    *aUrl = nsnull;
+    if (PL_strncasecmp(uri, "imap", 4) == 0)
+    {
+        nsCOMPtr<nsIImapUrl> imapUrl;
+        rv = nsComponentManager::CreateInstance(kImapUrlCID, nsnull,
+                                                nsIImapUrl::GetIID(),
+                                                getter_AddRefs(imapUrl));
+        if (NS_SUCCEEDED(rv) && imapUrl)
+            rv = imapUrl->QueryInterface(nsCOMTypeInfo<nsIURI>::GetIID(),
+                                         (void**) aUrl);
+    }
+    else if (PL_strncasecmp(uri, "mailbox", 7) == 0)
+    {
+        nsCOMPtr<nsIMailboxUrl> mailboxUrl;
+        rv = nsComponentManager::CreateInstance(kCMailboxUrl, nsnull,
+                                                nsIMailboxUrl::GetIID(),
+                                                getter_AddRefs(mailboxUrl));
+        if (NS_SUCCEEDED(rv) && mailboxUrl)
+            rv = mailboxUrl->QueryInterface(nsCOMTypeInfo<nsIURI>::GetIID(),
+                                            (void**) aUrl);
+    }
+    else if (PL_strncasecmp(uri, "news", 4) == 0)
+    {
+        nsCOMPtr<nsINntpUrl> nntpUrl;
+        rv = nsComponentManager::CreateInstance(kCNntpUrlCID, nsnull,
+                                                nsINntpUrl::GetIID(),
+                                                getter_AddRefs(nntpUrl));
+        if (NS_SUCCEEDED(rv) && nntpUrl)
+            rv = nntpUrl->QueryInterface(nsCOMTypeInfo<nsIURI>::GetIID(),
+                                         (void**) aUrl);
+    }
+    if (*aUrl)
+        (*aUrl)->SetSpec(uri);
+    return rv;
+}
+
+
+NS_IMPL_ISUPPORTS(nsMessageFromMsgHdrEnumerator, nsCOMTypeInfo<nsISimpleEnumerator>::GetIID())
+
+nsMessageFromMsgHdrEnumerator::nsMessageFromMsgHdrEnumerator(nsISimpleEnumerator *srcEnumerator,
+															 nsIMsgFolder *folder)
+{
+    NS_INIT_REFCNT();
+
+	mSrcEnumerator = dont_QueryInterface(srcEnumerator);
+	mFolder = dont_QueryInterface(folder);
+
+}
+
+nsMessageFromMsgHdrEnumerator::~nsMessageFromMsgHdrEnumerator()
+{
+	//member variables are nsCOMPtr's
+}
+
+
+NS_IMETHODIMP nsMessageFromMsgHdrEnumerator::GetNext(nsISupports **aItem)
+{
+	nsCOMPtr<nsISupports> currentItem;
+	nsCOMPtr<nsIMsgDBHdr> msgDBHdr;
+	nsCOMPtr<nsIMessage> message;
+	nsresult rv;
+
+	rv = mSrcEnumerator->GetNext(getter_AddRefs(currentItem));
+	if(NS_SUCCEEDED(rv))
+	{
+		msgDBHdr = do_QueryInterface(currentItem, &rv);
+	}
+
+	if(NS_SUCCEEDED(rv))
+	{
+		rv = mFolder->CreateMessageFromMsgDBHdr(msgDBHdr, getter_AddRefs(message));
+	}
+
+	if(NS_SUCCEEDED(rv))
+	{
+		currentItem = do_QueryInterface(message, &rv);
+		*aItem = currentItem;
+		NS_IF_ADDREF(*aItem);
+	}
+
+	NS_ASSERTION(NS_SUCCEEDED(rv),"getnext shouldn't fail");
+	return rv;
+}
+
+NS_IMETHODIMP nsMessageFromMsgHdrEnumerator::HasMoreElements(PRBool *aResult)
+{
+	return mSrcEnumerator->HasMoreElements(aResult);
+}
+
+nsresult NS_NewMessageFromMsgHdrEnumerator(nsISimpleEnumerator *srcEnumerator,
+										   nsIMsgFolder *folder,	
+										   nsMessageFromMsgHdrEnumerator **messageEnumerator)
+{
+	if(!messageEnumerator)
+		return NS_ERROR_NULL_POINTER;
+
+	*messageEnumerator =	new nsMessageFromMsgHdrEnumerator(srcEnumerator, folder);
+
+	if(!messageEnumerator)
+		return NS_ERROR_OUT_OF_MEMORY;
+
+	NS_ADDREF(*messageEnumerator);
+	return NS_OK;
+
+}
+
+// Where should this live? It's a utility used to convert a string priority, e.g., "High, Low, Normal" to an enum.
+// Perhaps we should have an interface that groups together all these utilities...
+nsresult NS_MsgGetPriorityFromString(const char *priority, nsMsgPriority *outPriority)
+{
+	if (!outPriority)
+		return NS_ERROR_NULL_POINTER;
+
+	nsMsgPriority retPriority = nsMsgPriorityNormal;
+
+	if (PL_strcasestr(priority, "Normal") != NULL)
+		retPriority = nsMsgPriorityNormal;
+	else if (PL_strcasestr(priority, "Lowest") != NULL)
+		retPriority = nsMsgPriorityLowest;
+	else if (PL_strcasestr(priority, "Highest") != NULL)
+		retPriority = nsMsgPriorityHighest;
+	else if (PL_strcasestr(priority, "High") != NULL || 
+			 PL_strcasestr(priority, "Urgent") != NULL)
+		retPriority = nsMsgPriorityHigh;
+	else if (PL_strcasestr(priority, "Low") != NULL ||
+			 PL_strcasestr(priority, "Non-urgent") != NULL)
+		retPriority = nsMsgPriorityLow;
+	else if (PL_strcasestr(priority, "1") != NULL)
+		retPriority = nsMsgPriorityHighest;
+	else if (PL_strcasestr(priority, "2") != NULL)
+		retPriority = nsMsgPriorityHigh;
+	else if (PL_strcasestr(priority, "3") != NULL)
+		retPriority = nsMsgPriorityNormal;
+	else if (PL_strcasestr(priority, "4") != NULL)
+		retPriority = nsMsgPriorityLow;
+	else if (PL_strcasestr(priority, "5") != NULL)
+	    retPriority = nsMsgPriorityLowest;
+	else
+		retPriority = nsMsgPriorityNormal;
+	*outPriority = retPriority;
+	return NS_OK;
+		//return nsMsgNoPriority;
+}
+
+
+nsresult NS_MsgGetUntranslatedPriorityName (nsMsgPriority p, nsString *outName)
+{
+	if (!outName)
+		return NS_ERROR_NULL_POINTER;
+	switch (p)
+	{
+	case nsMsgPriorityNotSet:
+	case nsMsgPriorityNone:
+		*outName = "None";
+		break;
+	case nsMsgPriorityLowest:
+		*outName = "Lowest";
+		break;
+	case nsMsgPriorityLow:
+		*outName = "Low";
+		break;
+	case nsMsgPriorityNormal:
+		*outName = "Normal";
+		break;
+	case nsMsgPriorityHigh:
+		*outName = "High";
+		break;
+	case nsMsgPriorityHighest:
+		*outName = "Highest";
+		break;
+	default:
+		NS_ASSERTION(PR_FALSE, "invalid priority value");
+	}
+	return NS_OK;
+}
+
+/* this used to be XP_StringHash2 from xp_hash.c */
+/* phong's linear congruential hash  */
+static PRUint32 StringHash(const char *ubuf)
+{
+  unsigned char * buf = (unsigned char*) ubuf;
+  PRUint32 h=1;
+  while(*buf) {
+    h = 0x63c63cd9*h + 0x9c39c33d + (int32)*buf;
+    buf++;
+  }
+  return h;
+}
+
+nsresult NS_MsgHashIfNecessary(nsCAutoString &name)
+{
+#if defined(XP_WIN16) || defined(XP_OS2)
+  const PRUint32 MAX_LEN = 8;
+#elif defined(XP_MAC)
+  const PRUint32 MAX_LEN = 25;
+#elif defined(XP_UNIX) || defined(XP_PC) || defined(XP_BEOS)
+  const PRUint32 MAX_LEN = 55;
+#else
+#error need_to_define_your_max_filename_length
+#endif
+  nsCAutoString str(name);
+
+#ifdef DEBUG_NS_MsgHashIfNecessary
+  printf("in: %s\n",str.GetBuffer());
+#endif
+
+  // Given a name, use either that name, if it fits on our
+  // filesystem, or a hashified version of it, if the name is too
+  // long to fit.
+  char hashedname[MAX_LEN + 1];
+  PRBool needshash = PL_strlen(str.GetBuffer()) > MAX_LEN;
+#if defined(XP_WIN16)  || defined(XP_OS2)
+  if (!needshash) {
+    needshash = PL_strchr(str.GetBuffer(), '.') != NULL ||
+      PL_strchr(str.GetBuffer(), ':') != NULL;
+  }
+#endif
+  PL_strncpy(hashedname, str.GetBuffer(), MAX_LEN + 1);
+  if (needshash) {
+    PR_snprintf(hashedname + MAX_LEN - 8, 9, "%08lx",
+                (unsigned long) StringHash(str.GetBuffer()));
+  }
+  name = hashedname;
+#ifdef DEBUG_NS_MsgHashIfNecessary
+  printf("out: %s\n",hashedname);
+#endif
+  
+  return NS_OK;
+}
+

mozilla/mailnews/base/util/nsMsgUtils.h

@@ -0,0 +1,67 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#ifndef _NSMSGUTILS_H
+#define _NSMSGUTILS_H
+
+#include "nsIURL.h"
+#include "nsIMsgMessageService.h"
+#include "nsString.h"
+#include "nsIEnumerator.h"
+#include "nsIMsgFolder.h"
+#include "msgCore.h"
+#include "nsCOMPtr.h"
+
+//These are utility functions that can used throughout the mailnews code
+
+//Utilities for getting a message service.
+NS_MSG_BASE nsresult GetMessageServiceProgIDForURI(const char *uri, nsString &progID);
+//Use ReleaseMessageServiceFromURI to release the service.
+NS_MSG_BASE nsresult GetMessageServiceFromURI(const char *uri, nsIMsgMessageService **messageService);
+NS_MSG_BASE nsresult ReleaseMessageServiceFromURI(const char *uri, nsIMsgMessageService *messageService);
+
+NS_MSG_BASE nsresult CreateStartupUrl(char *uri, nsIURI** aUrl);
+
+//An enumerator for converting nsIMsgHdrs to nsIMessages.
+class NS_MSG_BASE nsMessageFromMsgHdrEnumerator: public nsISimpleEnumerator
+{
+protected:
+	nsCOMPtr<nsISimpleEnumerator> mSrcEnumerator;
+	nsCOMPtr<nsIMsgFolder> mFolder;
+
+public:
+	NS_DECL_ISUPPORTS
+	nsMessageFromMsgHdrEnumerator(nsISimpleEnumerator *srcEnumerator, nsIMsgFolder *folder);
+	nsMessageFromMsgHdrEnumerator(){} //Default constructor that does nothing so nsComPtr will work.
+	virtual ~nsMessageFromMsgHdrEnumerator();
+
+  NS_DECL_NSISIMPLEENUMERATOR
+};
+
+NS_MSG_BASE nsresult NS_NewMessageFromMsgHdrEnumerator(nsISimpleEnumerator *srcEnumerator,
+										   nsIMsgFolder *folder,	
+										   nsMessageFromMsgHdrEnumerator **messageEnumerator);
+
+NS_MSG_BASE nsresult NS_MsgGetPriorityFromString(const char *priority, nsMsgPriority *outPriority);
+
+NS_MSG_BASE nsresult NS_MsgGetUntranslatedPriorityName (nsMsgPriority p, nsString *outName);
+
+NS_MSG_BASE nsresult NS_MsgHashIfNecessary(nsCAutoString &name);
+
+#endif
+

mozilla/mailnews/base/util/nsNewsSummarySpec.cpp

@@ -0,0 +1,71 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "nsNewsSummarySpec.h"
+#include "plstr.h"
+#include "nsString.h"
+
+MOZ_DECL_CTOR_COUNTER(nsNewsSummarySpec);
+
+nsNewsSummarySpec::~nsNewsSummarySpec()
+{
+	MOZ_COUNT_DTOR(nsNewsSummarySpec);
+}
+
+nsNewsSummarySpec::nsNewsSummarySpec()
+{
+	MOZ_COUNT_CTOR(nsNewsSummarySpec);
+}
+
+nsNewsSummarySpec::nsNewsSummarySpec(const char *folderPath)
+  : nsFileSpec(folderPath)
+{
+	MOZ_COUNT_CTOR(nsNewsSummarySpec);
+	CreateSummaryFileName();
+}
+
+nsNewsSummarySpec::nsNewsSummarySpec(const nsFileSpec& inFolderPath)
+: nsFileSpec(inFolderPath)
+{
+	MOZ_COUNT_CTOR(nsNewsSummarySpec);
+	CreateSummaryFileName();
+}
+
+nsNewsSummarySpec::nsNewsSummarySpec(const nsFilePath &inFolderPath) : nsFileSpec(inFolderPath)
+{
+	MOZ_COUNT_CTOR(nsNewsSummarySpec);
+	CreateSummaryFileName();
+}
+
+void nsNewsSummarySpec::SetFolderName(const char *folderPath)
+{
+	*this = folderPath;
+}
+
+void nsNewsSummarySpec::CreateSummaryFileName()
+{
+	char *leafName = GetLeafName();
+
+    nsCAutoString fullLeafName((const char*)leafName);
+
+	// Append .msf (message summary file) 
+	fullLeafName += ".msf";	
+
+	SetLeafName(fullLeafName.GetBuffer());
+	PL_strfree(leafName);
+}

mozilla/mailnews/base/util/nsNewsSummarySpec.h

@@ -0,0 +1,45 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1999 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#ifndef _nsNewsSummarySpec_H
+#define _nsNewsSummarySpec_H
+
+#include "nsFileSpec.h"
+#include "msgCore.h"
+
+// Class to name a summary file for a newsgroup,
+// given a full folder file spec. 
+// Note this class expects the invoking code to fully specify the folder path. 
+// This class does NOT prepend the local folder directory, or put .sbd on the containing
+// directory names.
+class NS_MSG_BASE nsNewsSummarySpec : public nsFileSpec
+{
+public:
+  nsNewsSummarySpec();
+  nsNewsSummarySpec(const char *folderPath);
+  nsNewsSummarySpec(const nsFileSpec& inFolderPath);
+  nsNewsSummarySpec(const nsFilePath &inFolderPath);
+  ~nsNewsSummarySpec();
+  void SetFolderName(const char *folderPath);
+
+protected:
+  void	CreateSummaryFileName();
+  
+};
+
+#endif /* _nsNewsSummarySpec_H */

mozilla/mailnews/base/util/nsUInt32Array.cpp

@@ -0,0 +1,277 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+
+#include "msgCore.h"    // precompiled header...
+#include "prlog.h"
+
+#include "MailNewsTypes.h"
+#include "nsUInt32Array.h"
+#include "nsQuickSort.h"
+
+MOZ_DECL_CTOR_COUNTER(nsUInt32Array);
+
+nsUInt32Array::nsUInt32Array()
+{
+	MOZ_COUNT_CTOR(nsUInt32Array);
+	m_nSize = 0;
+	m_nMaxSize = 0;
+	m_nGrowBy = 0;
+	m_pData = NULL;
+}
+
+nsUInt32Array::~nsUInt32Array()
+{
+	MOZ_COUNT_DTOR(nsUInt32Array);
+	SetSize(0);
+}
+
+/////////////////////////////////////////////////////////////////////////////
+
+PRUint32 nsUInt32Array::GetSize() const
+{
+	return m_nSize;
+}
+
+PRBool nsUInt32Array::SetSize(PRUint32 nSize,
+                              PRBool adjustGrowth,
+                              PRUint32 nGrowBy)
+{
+	if (adjustGrowth)
+		m_nGrowBy = nGrowBy;
+
+#ifdef MAX_ARR_ELEMS
+	if (nSize > MAX_ARR_ELEMS);
+	{
+		PR_ASSERT(nSize <= MAX_ARR_ELEMS); // Will fail
+		return PR_FALSE;
+	}
+#endif
+
+	if (nSize == 0)
+	{
+		// Remove all elements
+		PR_Free(m_pData);
+		m_nSize = 0;
+		m_nMaxSize = 0;
+		m_pData = NULL;
+	}
+	else if (m_pData == NULL)
+	{
+		// Create a new array
+		m_nMaxSize = PR_MAX(8, nSize);
+		m_pData = (PRUint32 *)PR_Calloc(1, m_nMaxSize * sizeof(PRUint32));
+		if (m_pData)
+			m_nSize = nSize;
+		else
+			m_nSize = m_nMaxSize = 0;
+	}
+	else if (nSize <= m_nMaxSize)
+	{
+		// The new size is within the current maximum size, make sure new
+		// elements are to initialized to zero
+		if (nSize > m_nSize)
+			nsCRT::memset(&m_pData[m_nSize], 0, (nSize - m_nSize) * sizeof(PRUint32));
+
+		m_nSize = nSize;
+	}
+	else
+	{
+		// The array needs to grow, figure out how much
+		PRUint32 nMaxSize;
+		nGrowBy  = PR_MAX(m_nGrowBy, PR_MIN(1024, PR_MAX(8, m_nSize / 8)));
+		nMaxSize = PR_MAX(nSize, m_nMaxSize + nGrowBy);
+#ifdef MAX_ARR_ELEMS
+		nMaxSize = PR_MIN(MAX_ARR_ELEMS, nMaxSize);
+#endif
+
+		PRUint32 *pNewData = (PRUint32 *)PR_Malloc(nMaxSize * sizeof(PRUint32));
+		if (pNewData)
+		{
+			// Copy the data from the old array to the new one
+			nsCRT::memcpy(pNewData, m_pData, m_nSize * sizeof(PRUint32));
+
+			// Zero out the remaining elements
+			nsCRT::memset(&pNewData[m_nSize], 0, (nSize - m_nSize) * sizeof(PRUint32));
+			m_nSize = nSize;
+			m_nMaxSize = nMaxSize;
+
+			// Free the old array
+			PR_Free(m_pData);
+			m_pData = pNewData;
+		}
+	}
+
+	return nSize == m_nSize;
+}
+
+/////////////////////////////////////////////////////////////////////////////
+
+PRUint32 &nsUInt32Array::ElementAt(PRUint32 nIndex)
+{
+	PR_ASSERT(nIndex < m_nSize);
+	return m_pData[nIndex];
+}
+
+PRUint32 nsUInt32Array::GetAt(PRUint32 nIndex) const
+{
+	PR_ASSERT(nIndex < m_nSize);
+	return m_pData[nIndex];
+}
+
+PRUint32 *nsUInt32Array::GetData() 
+{
+	return m_pData;
+}
+
+void nsUInt32Array::SetAt(PRUint32 nIndex, PRUint32 newElement)
+{
+	PR_ASSERT(nIndex < m_nSize);
+	m_pData[nIndex] = newElement;
+}
+
+/////////////////////////////////////////////////////////////////////////////
+
+PRUint32 nsUInt32Array::Add(PRUint32 newElement)
+{
+	PRUint32 nIndex = m_nSize;
+
+#ifdef MAX_ARR_ELEMS
+	if (nIndex >= MAX_ARR_ELEMS) 
+		return -1;	     
+#endif			
+
+	SetAtGrow(nIndex, newElement);
+	return nIndex;
+}
+
+PRUint32 nsUInt32Array::Add(PRUint32 *elementPtr, PRUint32 numElements) 
+{ 
+	if (SetSize(m_nSize + numElements))
+		nsCRT::memcpy(m_pData + m_nSize, elementPtr, numElements * sizeof(PRUint32)); 
+
+	return m_nSize; 
+} 
+
+PRUint32 *nsUInt32Array::CloneData() 
+{ 
+	PRUint32 *copyOfData = (PRUint32 *)PR_Malloc(m_nSize * sizeof(PRUint32)); 
+	if (copyOfData) 
+		nsCRT::memcpy(copyOfData, m_pData, m_nSize * sizeof(PRUint32)); 
+
+	return copyOfData; 
+} 
+
+void nsUInt32Array::InsertAt(PRUint32 nIndex, PRUint32 newElement, PRUint32 nCount)
+{
+	PR_ASSERT(nCount > 0);
+
+	if (nIndex >= m_nSize)
+	{
+		// If the new element is after the end of the array, grow the array
+		SetSize(nIndex + nCount);
+	}
+	else
+	{
+		// The element is being insert inside the array
+		int nOldSize = m_nSize;
+		SetSize(m_nSize + nCount);
+
+		// Move the data after the insertion point
+		nsCRT::memmove(&m_pData[nIndex + nCount], &m_pData[nIndex],
+			       (nOldSize - nIndex) * sizeof(PRUint32));
+	}
+
+	// Insert the new elements
+	PR_ASSERT(nIndex + nCount <= m_nSize);
+	while (nCount--)
+		m_pData[nIndex++] = newElement;
+}
+
+void nsUInt32Array::InsertAt(PRUint32 nStartIndex, const nsUInt32Array *pNewArray)
+{
+	PR_ASSERT(pNewArray != NULL);
+
+	if (pNewArray->GetSize() > 0)
+	{
+		InsertAt(nStartIndex, pNewArray->GetAt(0), pNewArray->GetSize());
+		for (PRUint32 i = 1; i < pNewArray->GetSize(); i++)
+			m_pData[nStartIndex + i] = pNewArray->GetAt(i);
+	}
+}
+
+void nsUInt32Array::RemoveAll()
+{
+	SetSize(0);
+}
+
+void nsUInt32Array::RemoveAt(PRUint32 nIndex, PRUint32 nCount)
+{
+	PR_ASSERT(nIndex + nCount <= m_nSize);
+
+	if (nCount > 0)
+	{
+		// Make sure not to overstep the end of the array
+		int nMoveCount = m_nSize - (nIndex + nCount);
+		if (nCount && nMoveCount)
+			nsCRT::memmove(&m_pData[nIndex], &m_pData[nIndex + nCount],
+		               nMoveCount * sizeof(PRUint32));
+
+		m_nSize -= nCount;
+	}
+}
+
+void nsUInt32Array::SetAtGrow(PRUint32 nIndex, PRUint32 newElement)
+{
+	if (nIndex >= m_nSize)
+		SetSize(nIndex+1);
+	m_pData[nIndex] = newElement;
+}
+
+/////////////////////////////////////////////////////////////////////////////
+
+void nsUInt32Array::CopyArray(nsUInt32Array *oldA)
+{
+	CopyArray(*oldA);
+}
+
+void nsUInt32Array::CopyArray(nsUInt32Array &oldA)
+{
+	if (m_pData)
+		PR_Free(m_pData);
+	m_nSize = oldA.m_nSize;
+	m_nMaxSize = oldA.m_nMaxSize;
+	m_pData = (PRUint32 *)PR_Malloc(m_nSize * sizeof(PRUint32));
+	if (m_pData)
+		nsCRT::memcpy(m_pData, oldA.m_pData, m_nSize * sizeof(PRUint32));
+}
+
+/////////////////////////////////////////////////////////////////////////////
+
+static int CompareDWord (const void *v1, const void *v2, void *)
+{
+	// QuickSort callback to compare array values
+	PRUint32 i1 = *(PRUint32 *)v1;
+	PRUint32 i2 = *(PRUint32 *)v2;
+	return i1 - i2;
+}
+
+void nsUInt32Array::QuickSort (int (*compare) (const void *elem1, const void *elem2, void *data))
+{
+	if (m_nSize > 1)
+		NS_QuickSort(m_pData, m_nSize, sizeof(void*), compare ? compare : CompareDWord, nsnull);
+}

mozilla/mailnews/base/util/nsUInt32Array.h

@@ -0,0 +1,73 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * The contents of this file are subject to the Netscape Public License
+ * Version 1.0 (the "NPL"); you may not use this file except in
+ * compliance with the NPL.  You may obtain a copy of the NPL at
+ * http://www.mozilla.org/NPL/
+ *
+ * Software distributed under the NPL is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
+ * for the specific language governing rights and limitations under the
+ * NPL.
+ *
+ * The Initial Developer of this code under the NPL is Netscape
+ * Communications Corporation.  Portions created by Netscape are
+ * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
+ * Reserved.
+ */
+#ifndef _nsUInt32Array_H_
+#define _nsUInt32Array_H_
+
+#include "nscore.h"
+#include "nsCRT.h"
+#include "prmem.h"
+#include "msgCore.h"
+
+class NS_MSG_BASE nsUInt32Array
+{
+public:
+	// Construction/destruction
+    nsUInt32Array();
+    virtual ~nsUInt32Array();
+
+	// State/attribute member functions
+	PRUint32          GetSize() const;
+	PRBool            SetSize(PRUint32 nNewSize, PRBool AdjustGrowth=PR_FALSE, PRUint32 nGrowBy = 0);
+
+	// Accessor member functions
+	PRUint32            &ElementAt(PRUint32 nIndex);
+	PRUint32             GetAt(PRUint32 nIndex) const;
+	PRUint32            *GetData();
+	void               SetAt(PRUint32 nIndex, PRUint32 newElement);
+
+	// Insertion/deletion member functions
+	PRUint32			Add(PRUint32 newElement);
+	PRUint32           Add(PRUint32 *elementPtr, PRUint32 numElements); 
+	void	           InsertAt(PRUint32 nIndex, PRUint32 newElement, PRUint32 nCount = 1);
+	void               InsertAt(PRUint32 nStartIndex, const nsUInt32Array *pNewArray);
+	void               RemoveAll();
+	void               RemoveAt(PRUint32 nIndex, PRUint32 nCount = 1);
+	void               SetAtGrow(PRUint32 nIndex, PRUint32 newElement);
+
+	// Sorting member functions
+	void               QuickSort(int (*compare) (const void *elem1, const void *elem2, void *) = NULL);
+
+	// Overloaded operators
+	PRUint32             operator[](PRUint32 nIndex) const { return GetAt(nIndex); }
+	PRUint32            &operator[](PRUint32 nIndex) { return ElementAt(nIndex); }
+
+	// Miscellaneous member functions
+	PRUint32            *CloneData(); 
+	void               CopyArray(nsUInt32Array *oldA);
+	void               CopyArray(nsUInt32Array &oldA);
+
+protected:
+    // Member data
+	PRUint32 m_nSize;
+	PRUint32 m_nMaxSize;
+	PRUint32 m_nGrowBy;
+	PRUint32* m_pData;
+};
+
+
+#endif // _DWordArray_H_

mozilla/mstone/Building

@@ -1,46 +0,0 @@
-Mstone building instructions
-
-For Unix, just "gmake" one of these
-	release		The usual optimized build
-	debug		Debug build includes some asserts
-
-	rpackage	Build the release and package it
-	dpackage	Build the debug version and package it
-
-	all_OPT		Build a multi-platform package
-	all_DBG		Build a multi-platform debug package
-
-For NT, run autobuild.bat.  This will build and package both the debug
-and optimized versions.  Perl must already be built and installed in
-\.  The NT build may be behind the Unix stuff.  Pull the build/package/*
-subdirectories into the main build/package before doing a 'make all_???'.
-
-You can build multiple OSes in the same tree.  Debug and optimized
-builds are kept separately.  The all_??? targets will combine whatever
-OSes are present into a multi-architecture package (including NT).
-Note that you have ot build and package each OS before doing the all_
-step.
-
-
-Helper components
-
-Linux usually comes with workable versions of gnuplot and perl.  Most
-other OSes don't.  Mstone can build and package perl, gnuplot, and gd
-with the right settings.  These will be automatically built and
-packaged if they are present.
-
-Unpack gd1.3 or later in the mstone directory.  You can probably find
-gd from here: http://www.boutell.com/gd/.  The directory should look
-like gd?.*.  Right now we need the (obsolete) version 1.3 to generate
-GIF files (without patented run-length coding).  The scripts need to
-be updated to be able to handle PNG or GIF files.
-
-Unpack gnuplot 3.7 or later in the mstone directory.  You can probably
-find gnuplot from http://www.cs.dartmouth.edu/gnuplot_info.html.  The
-directory should look like gnuplot-?.* (the exact version should not
-matter).  Gnuplot requres gd to generate GIFs (which is what we need).
-
-Unpack perl 5.005 or later in the mstone directory.  You can probably
-find perl from http://www.perl.com/pub/language/info/software.html.
-The directory should look like perl5.* (the exact version should
-not matter).

mozilla/mstone/ChangeLog

@@ -1,73 +0,0 @@
-2005-02-19  Dan Christian  <robodan@idiom.com>
-
-	* Merge big Sendmail patch see ChangeLog-Sendmail for details
-
-	* src/bench.h (VERSION): Start working toward version 5.0 (now 4.9)
-
-2004-09-07  Dan Christian  <robodan@idiom.com>
-
-	* data/*.msg: Updated with more realistic messages
-
-	* bin/args.pl: Really fix doc link to be relative
-
-	* src/smtp.c (sendSMTPLoop): Handle file lists (random selection)
-	(sendFile): New, send file with option offset and head/tail
-	(SmtpFilePrep): Split a glob pattern to a list
-	(SmtpFileInit): New, split out initial file scan
-
-	* src/bench.c (rangeNext): Get to last value in a random range
-
-2004-06-14  Dan Christian  <robodan@idiom.com>
-
-	* Makefile (VERSION): Bump version to 4.3
-
-	* Make build work on recent versions of Linux and Solaris
-
-	* Make ssh the default way to get a remote shell
-
-	* Support SVG graph output (not supported by all browsers)
-
-	* Use rfc822 style from addresses
-
-	* Fix documentation link on index page to be local
-
-2000-04-28  Dan Christian  <dac@x.cx>
-
-	* http and wmap now use common routines from http-util
-
-	* http is now separated from the pish command structure.
-
-2000-04-27  Dan Christian  <dac@x.cx>
-
-	* bin/genplot.pl: Support gnuplot generating images other than gif
-
-	* src/smtp.c (sendSMTPStart): Send domain name with HELO
-
-2000-04-05  Dan Christian <robodan@netscape.com>
-	* Fix bug in WMAP where the login field was reporting banner data.
-
-	* Add a reconnect concept to WMAP.  This separates out the
-	reconnect activity from the initial connections.  There is still a
-	bug/feature that the reconnect increments an error which can
-	eventually hit the maxErrors limit.  You have to record the error
-	or else you could not get the "connections" graph right.
-	
-2000-03-31  Dan Christian <robodan@netscape.com>
-	
-	* Merged setup and mstone into one script to reduce command
-	namespace polution.  "mstone setup" is the the same as "setup".
-
-	* Made setup try to be more tolerant of OSes that were not
-	include in the distribution.  SunOS 5.7 will fall back to 5.6.
-
-	* Now package conf/general.wld.in and only copy to general.wld if
-	there isn't one already in place.  This means that you can unpack
-	new bits over old bits without blowing away your configuration.
-	
-	* Added <includeOnce file> command to workloads.  This allows
-	tests to be used either as a stand alone or as part of another
-	test (e.g. smtp).
-
-	* Converted ChangeLog to more common formating
-
-	* Spilt off old ChangeLog entries to ChangeLog.1 and ChangeLog.2

mozilla/mstone/ChangeLog-Sendmail

@@ -1,86 +0,0 @@
-2005-02-03  Thom O'Connor <thom@sendmail.com>
-
-        * Merge Mozilla mstone HEAD with Sendmail,Inc. modifications. In
-          particular, this included some hand-waving around the bitwise
-          operators "leaveMailOnServer" in the Mozilla branch and the
-          dinst_t struct pish->leaveMailOnServerDist.
-
-2005-01-25  Thom O'Connor <thom@sendmail.com>
-
-        * Fix comments, properly attribute Sean O'Rourke's contributions.
-
-2004-09-21  Thom O'Connor <thom@sendmail.com>
-
-	* Modified config/config.mk to build SSL version of mailclient.
-
-2004-06-07  Thom O'Connor <thom@sendmail.com>
-
-	* Remove _thread_sys_poll defininition for poll in FreeBSD builds
-	(bench.h).
-
-2001-04-27  Sean O'Rourke  <sean@sendmail.com>
-
-	* distributions can now be truncated.  This is used to prevent
-	0-recipient messages, and could be used to prevent enormous
-	messages.
-
-	* throttling: Preload workloads use some additional mstone magic
-	to throttle delivery rate based on server responsiveness.  This is
-	still in the experimental phase, and may change.
-
-	* fix for parsing bug exposed by distribution truncation notation.
-	
-2001-03-10    Sean O'Rourke <sean@sendmail.com>
-
-	* clients: Fixed up code for specifying client counts on a
-	per-host or per-group basis.  This eliminates the need to force
-	the mozilla distribution code to do one's bidding.
-
-	* smtpsink.pl: Very basic threaded perl SMTP sink.  This may go
-	away to be replaced by the sink from smtpslam.  Needs much better
-	statistics.
-
-2001-02-24    Sean O'Rourke <sean@sendmail.com>
-
-	* checksums added.  See {checksum,md5}.{c,h}.  Auto-generated
-	messages can currently have checksums computed over the body, and
-	pop and multipop retrieval will verify the sum.
-
-2001-02-21    Sean O'Rourke <sean@sendmail.com>
-
-	* MIME generation changed to generate deep messages rather than
-	  several parts.  This should be a better test of MIME parsers,
-	  forcing them to save more state.
-
-2001-02-18    Sean O'Rourke <sean@sendmail.com>
-
-	* mstone_changes.html: update SSL documentation.
-
-	* wld, defaults.pm: divide the ever-expanding "config" section
-	  into more descriptive subparts: clients, server, sink, mstone.
-
-	* report: now in bin directory, where it should be.
-
-2001-02-17    Sean O'Rourke <sean@sendmail.com>
-
-	* client.c, main.c, parse.c: removed old throttling code, as it
-	  wasn't being used.
-	
-	* ALL: General code cleanup.
-	
-	* sysdep.c: simplified rlimit-bumping code, added increase for
-	  RLIM_NPROC, as threads are procs on some systems.
-
-	* imap4.c: removed silliness of malloc()ing a buffer the size of
-	  the entire message every time we retrieve a message.
-
-	* xalloc.c, xalloc.h: consolidated memory allocation so everyone
-	  handles OOM the same way (for now, dump core).
-
-	* constants.h: various assumptions and limits, were in bench.h.
-
-	* events: added event-queue model to reduce thread requirements.
-	  Eventually, it would be nice for a consultant to be able to run
-	  this off a laptop to test a small- to medium-sized box.  For
-	  now, at least, configuration remains the same.  This doesn't
-	  work on NT.  Oh, well.

mozilla/mstone/ChangeLog.1

@@ -1,129 +0,0 @@
-MailStone 4.1: Changes to since version 4.0
-	
-	* threads are used on all platforms reduces memory requirements by
-	10x for large numbers of clients must run as root for maximum
-	connections per process
-	
-	* massive internal code and script cleanup / rewrite performance
-	improvements for socket handling (blocking) and caching files and
-	name lookups
-	
-	* filename and path conventions restructuring '/mailstone'
-	hardwired path no longer required mailstone/results/index.html
-	(index of test runs) mailstone/results/<datestamp>/stderr (look
-	here for errors) mailstone/results/<datestamp>/results.html
-	mailstone/results/<datestamp>/results.txt
-	mailstone/results/<datestamp>/work.wld (workload config used)
-	mailstone/results/<datestamp>/testbed.tbd (testbed used)
-	mailstone/results/<datestamp>/summary.csv (per client summary)
-	mailstone/results/<datestamp>/*.gif (graphs)
-	mailstone/tmp/<datestamp>/*.out (raw results from each client)
-	mailstone/conf/*.wld (workload file) mailstone/conf/*.html
-	(machine descriptions for reports) mailstone/data/*.msg (sample
-	test messages)
-	
-	* periodic statistics reporting allows for trend analysis of many
-	variables per protocol.  sampling rate is automatically determined
-	by mailmaster Can now generate on-the-fly reports for above by
-	running "process"
-	
-	* The accountFormat directive is now obsolete.  Use loginFormat
-	and addressFormat instead.
-	
-	* The numAccounts and beginAccounts directives are now obsolete.
-	Use numLogins, firstLogin, numAddresses, and firstAddress instead.
-	
-	* The sequentialLogins directive disables random account number
-	selection.  This insures a predictable account sequence.
-	
-	* The checkMailInterval directive for IMAP is now obsolete.  Use
-	loopDelay instead.
-	
-	* The directives idleTime, loopDelay, and numLoops now apply to
-	all protocols.  See the manual for how loopDelay and numLoops are
-	used by each protocol.
-	
-	* a command directive such as <SMTP> without HOSTS=xxx will now
-	apply to all clients in the testbed
-	
-	* <include> directive for workload and testbed files (e.g. for
-	user profile)
-	
-	* workloads are now passed to 'mailclient' through stdin no test
-	specific files need to be copied to client machines more
-	synchonized test startup
-	
-	* 'setup' script will copy mailclient and test messages
-	(data/*.msg) to each testbed machine in /var/tmp
-	
-	* 'cleanup' form of setup will remove mailclient and test messages
-	from each testbed machine in /var/tmp
-	
-	* 'checktime' form of setup will (nearly) simultaneously retrieve
-	time from each client.  This lets you easily check for clock
-	problems.
-	
-	* 'timesync' form of setup will (nearly) simultaneously set time
-	on each client.  This only works on OSs that support setting
-	seconds through the "date" command.  rdate or ntpdate should be
-	used if available.  You must be the root user and be able to rsh
-	as root for timesync to work.
-	
-	* Improved reports in text and html (formatting and content)
-	
-	* The text version of the report is now only displayed
-	automatically if "-v" is given.
-	
-	* Graphs with more than one protocol will also display a "Total"
-	graph
-	
-	* The graphs can now be customized for each test (see sample.wld
-	for the default)
-	
-	* You can now add graphs (in addition to the default or configured
-	ones) by using "process timestamp -a conf/moregraph.wld".
-	
-	* An informative index of test runs is now generated in
-	results/index.html
-	
-	* The index is updated while the run is in progress to make
-	checking for errors easier.
-	
-	* The error log now displays times relative to test start.
-	
-	* Memory use while processing results has been greatly reduced.
-	
-	* A summary of the data from each process is now saved in a
-	Comma-separated-value (CSV) file.  results/timestamp/clients.csv
-	
-	* A summary of the data over time is now saved in a
-	Comma-separated-value (CSV) file.
-	results/timestamp/protocol-time.csv
-	
-	* new gnuplot binary included, can output directly to gif format
-	
-	* read and write performance numbers now reported separately
-	
-	* new runtime banners and copyrights (ooh boy)
-	
-	* idleTime option for IMAP fixed, plus now applies to all commands
-	
-	* blockTime now sets a delay between command blocks
-	
-	* Process model is as follows
-	  User runs the top-level 'mstone' script
-	  This calls 'conf/testname.pl' with command line arguments
-	  This calls 'mailmaster.pl' with config and command line arguments
-	  mailmaster uses 'rsh' or equivalent to launch mailclients
-          mailclient runs on each testbed and forks numprocs
-	  each proc spawns numthreads (one per client)
-
-          <run tests> (note: results are being sent continuously)
-
-          threads send results back through sockets to top mailclient
-	  mailclient forwards results back over stdout via rsh pipe
-          (for future work - do some data reduction/combining here)
-	  mailmaster directs output to each client-<hostname> file
-	  mailmaster launches report generator
-	
-	* sample LDIF fragment for a postmaster entry included

mozilla/mstone/ChangeLog.2

@@ -1,77 +0,0 @@
-MailStone 4.15: Changes to Mailstone since version 4.1
-	
-	* Setup now checks license acceptance and configures a basic
-	setup.  By default, it will also create a user LDIF file with a
-	'allusers' account.
-	
-	* All parameters and and testbed information may now be specified
-	in the workload files (*.wld).  New sections: CONFIG, CLIENT,
-	MONITOR, PRETEST, and POSTTEST.  Command line parameters still
-	override the files.  A complete copy of the configuration is saved
-	in results/<TIMESTAMP>/all.wld.
-	
-	* The '*.pl', '*.tbd', and 'config*' files in ./conf/ are
-	depreciated.  These should still work, but the new sections are
-	simpler and more flexible.
-	
-	* Any CONFIG parameter can now be specified on the command line
-	using the form: 'PARAMETER=value'.  Note that PARAMETER is case
-	insensitive.  No whitespace is allowed before or after the '='.
-	
-	* The new switch '-l' or CONFIG parameter 'ClientCount' can now
-	specify the total number of clients.  The 'MaxClients' and
-	'MaxThreads' parameters in each CLIENT section control load
-	balancing.  If the 'processes' and 'threads' parameters are set,
-	then the load for that CLIENT section will not be adjusted, but
-	will be taken into account when calculating other CLIENT sections.
-	If just 'processes' is set, then only the thread count will be
-	adjusted.  All hosts in a CLIENT section will run the same number
-	of processes and threads.
-	
-	* bin/makeusers.pl now creates users, broadcast account, etc.
-	Numbered passwords are now suppored.  The new user/password format
-	now replaces '%ld' with the user number to match the rest of
-	mailstone.  The ldif/ directory is obsolete.  Run "perl/bin/perl
-	bin/makeusers.pl -h" for usage.
-	
-	* NT client machines may now be used from a Unix test master.  See
-	conf/sample.wld for configuration details.
-	
-	* Commands can now be run for a specified block count, error
-	count, or time (whichever comes first).  Set 'maxBlocks' and/or
-	'maxErrors'.
-	
-	* Telemetry logging to /var/tmp/mstone-log.pn.tn is now performed
-	when "telemetry 1" is specified.
-	
-	* The name used in the "CLIENT" section is now used to match
-	"HOSTS=..." qualifier.  Compatibility with "hostname" is no longer
-	needed.
-	
-	* Config values can now use quoted characters such as \n, \r, \t
-	
-	* Config values can be continued using \ (backslash)
-	
-	* System configuration information (SYSCONFIG) can now be
-	specified entirely within a workload file by quoting the newlines.
-	
-	* Config values get enclosing double-quotes stripped
-	
-	* Preliminary support for HTTP and WMAP (WebMail) testing.
-	
-	* New table formats are easier to interpret and allow more protocols.
-	
-	* The new text format report is easier to machine processes.
-	
-	* The following command line switches are now obsolete: -f, -g,
-	-e, -p, and -l.  The same functionality can be obtained by
-	FREQUENCY=<interval>, GNUPLOT=<path>, RSH=<path>, RCP=<path>, and
-	TEMPDIR=<directory> respectively.
-	
-	* File backups are now created.  When ./process is run multiple
-	times, the old files are moved to the ./tmp/<TIMESTAMP>/
-	directory.
-	
-	* perl has been updated to include full perl5.005_03 install
-	package.  Perl support for each architecture is now under the
-	perl/ directory.

mozilla/mstone/INSTALL

@@ -1,222 +0,0 @@
-
-		Mstone 4.15 Quick Installation
-
-This version of Mstone runs on many current UNIX platforms and NT.
-Only a web browser and text editor are needed to view the results and
-configure tests.
-
-
-QUICK INSTALL
--------------
-
-IMPORTANT: If you have an existing mstone, save a copy of the
-mstone/conf directory to preserve any configuration files you may want
-to keep.
-
-Unpack distribution:
-
-	tar xzf /tmp/mstone_OPT.tar.gz
-or
-	gunzip -c /tmp/mstone_OPT.tar.gz | tar xf -
-or
-	unzip /tmp/mstone_OPT.zip
-
-	cd mstone
-
-Both the tar.gz file and the zip file are identical.  Use whichever is
-more convenient for you.
-
-This will create a sub-directory named "mstone" with files and
-directories under that.  
-
-cd mstone
-
-NOTE: all scripts must be run from the mstone directory.
-
-
-Do initial configuration:
-
-Run "mstone config".  It will ask you about your system configuration.
-Fill in the appropriate values and create the optional user accounts
-and broadcast account.  When it asks about client machines, enter them
-seperated by commas, with no spaces (e.g. host1,host2,host3).  If you
-need to re-configure, run "mstone config".
-
-The machine starting the test may also be a client.  For accurate
-results, clients should not be run on the test mailserver machine (or
-its directory server).  If all the client machines are not running
-the same operating system version, see "Configuring Client Machines"
-below to configure for different OSes.
-
-When the test master is on NT, only the local machine may be a client
-and only one process is allowed.  You will not be asked about client
-machines.
-
-Setup only configures the most important parameters.  If you have more
-advanced needs, edit conf/general.wld appropriately.
-
-Run "mstone setup".  It will now push the necessary files to each
-client machine.  If there are problems (i.e. with rsh permissions),
-fix them and re-run "mstone setup" until everything works.
-
-
-Install test accounts:
-
-Setup will create a file called conf/MAILHOST.ldif (where MAILHOST is the
-name of your mail server).  If you are not using Netscape Messaging
-and Directory Servers, then you may have to edit the ldif file or use
-alternate means to create the user accounts.
-
-To import these users into Netscape Messaging Server, use "add
-entries" from the directory console or use the ldapmodify command line
-utility.
-
-Note: imports will go faster if access logging is disabled.  For large
-user counts (more than 10,000 users), it may be much faster to export
-the current database, merge the files together manually, and then
-import the new database.
-
-Here is how the ldapmodify supplied with Netscape Messaging Server
-would be used.
-
-setenv LD_LIBRARY_PATH /usr/netscape/messaging/lib
-cd /usr/netscape/messaging
-shared/bin/ldapmodify -h mailhost -a -D 'cn=directory manager' -w d_m_password < conf/MAILHOST.ldif
-
-
-Check time consistency:
-
-IMPORTANT: The system time on each client machine must be synchronized
-within one second of each other for accurate results graphs.
-
-Run "checktime" to see the time on each client.  There should not be
-more than two seconds difference among the displayed time.
-
-The best way to synchronize clients is use NTP (Network Time Protocol)
-or similar protocols (like rdate or timeslave) that have sub second
-accuracy.
-
-A simple utility called "timesync" is provide to push the local
-system time to all clients.  You must be root and have root rsh
-permissions to use timesync.  Timesync only works on OSs that support
-setting seconds using "date MMDDhhmmCCYY.ss".  Timesync is only
-accurate to a second (at best) and should only be used if better
-protocols aren't available.
-
-When running the test master on NT, "checktime" and "timesync" are
-never needed (because there is only one client machine).  Timesync
-will be ignored for NT clients, another method must be used
-(e.g. timeserv or Dimension4).
-
-
-Run tests:
-
-Try it out.  Use small process and thread counts until everything is
-working.
-
-mstone pop -t 30s
-
-The script will tell you how many processes and threads it is running
-on each system and where errors are logged.  At the end of the test,
-it will print out a URL for the test results and an indication of the
-size of the errorlog file (stderr).
-
-The results of the mstone run will display statistics for each
-protocol that was tested.  The results are presented in both a HTML
-web page and a text file.  The text file is simple and uniform, while
-the web page is more user readable.  The web page has links to the
-test configuration files, error log, and the text version.
-
-For long tests run (e.g. 8 hours), the results can be updated while
-the test is running by using the "process" utility.  Don't run
-"process" near the very end of the test.
-
-If a test has to be aborted, then use "process" to generate a report
-using the available data.
-
-
-Customize tests:
-
-Copy and edit the scripts (e.g. "conf/pop.wld") to define new tests.
-The CONFIG section specifies all the attributes used in the test.
-Other sections specify the protocols to be tested and the parameters
-for them.
-
-All switches can be overridden on the command line to facilitate
-easier testing.  The exact configuration (include command line
-overrides) is stored with the results from each test.
-
-
-Maintenance:
-
-You can run "mstone setup" at any time (except during a test :-) to
-update the files on the client machines.
-
-Use "mstone cleanup" to remove the files created by "mstone setup".
-
-After the test is finished, the directories under "tmp/" can be
-compressed or deleted to save space.  All the information about a test
-run is stored in the "results/" directories.
-
-
-Configuring client machines:
-
-Edit conf/general.wld to include CLIENT sections for each machines to
-use.
-
-You can also specify the OS type for each client machine.  Set the
-"Arch" parameter in each CLIENT section as appropriate (e.g. SunOS5.6,
-Linux2.2_x86, AIX4.2, HP-UXB.11.00, IRIX6.5, OSF1V4.0, WINNT4.0). The
-directories under "bin" specify the available OS types.
-
-For NT4.0 clients with a UNIX test master, you will need to configure
-"command" and "tempDir" for proper operation.  See the "HOSTS=winnt01"
-example in conf/sample.wld.
-
-The total number of processes and threads that can be supported on a
-client is dependent on the number of commands in the test, the OS, and
-available memory.  Check the stderr log for messages about not being
-able to create processes or threads.  Check on the client machines
-during the test and make sure they aren't running out of CPU.  The
-UNIX programs "top" and "vmstat" are good for this.  If the client CPU
-is more than 75% busy, use more machines.
-
-Also watch out for network saturation.  You may have to use machines
-with separate networks to the server to reach full server load.
-
-
-Know problems:
-
-There can be extraneous errors or connections after the specified end
-of the test.  These are most likely do to stopping the test and should
-be ignored.
-
-At the end of the test, all current connections will logout without
-any delays.  This can cause very high peak loads.
-
-If one process exits early (due to misconfiguration or resource
-exhaustion) and the monitoring command did not specify a count (%c),
-then the monitoring tasks will be terminated early as well.
-
-Monitoring commands that specify a count (%c), may take longer than
-predicted and delay the processing of test results.  This is because
-vmstat actually delays the requested time plus the time needed to
-generate the statistics summary.
-
-If you are doing tests with large thread counts, you may have to run
-as root to allow mailclient to raise its resource limits.
-
-The telemetry logging for SMTP, POP3, and IMAP4 is incomplete.  Most
-commands are captured, but banners and message contents may be missing.
-
-The MaxBlocks parameter gets divided by the total number of processes
-before starting each client.  This doesn't account for clients that
-don't have commands to run.
-
-The HTTP protocol used by WMAP allows connections to be dropped and
-re-connected as needed.  WMAP logs this as an error and an additional
-connect.  The error log must be consulted to distinguish another types
-of connection errors (timeout or connection refused) from an automatic
-re-connect.
-
-The HTTP protocol test is experimental and subject to change.

mozilla/mstone/LICENSE

@@ -1,19 +0,0 @@
-The contents of this software package are subject to the Netscape
-Public License Version 1.1 (the "License"); you may not use this
-software except in compliance with the License. You may obtain a copy
-of the License at http://www.mozilla.org/NPL/
-
-Software distributed under the License is distributed on an "AS IS"
-basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-the License for the specific language governing rights and limitations
-under the License.
-
-Alternatively, the this software package may be used under the terms
-of the GNU Public License (the "GPL"), in which case the provisions of
-the GPL are applicable instead of those above.  If you wish to allow
-use of your version of this file only under the terms of the GPL and
-not to allow others to use your version of this file under the NPL,
-indicate your decision by deleting the provisions above and replace
-them with the notice and other provisions required by the GPL.  If you
-do not delete the provisions above, a recipient may use your version
-of this file under either the NPL or the GPL.

mozilla/mstone/LICENSE.npl

@@ -1,535 +0,0 @@
-                          MOZILLA PUBLIC LICENSE
-                                Version 1.1
-
-                              ---------------
-
-1. Definitions.
-
-     1.0.1. "Commercial Use" means distribution or otherwise making the
-     Covered Code available to a third party.
-
-     1.1. "Contributor" means each entity that creates or contributes to
-     the creation of Modifications.
-
-     1.2. "Contributor Version" means the combination of the Original
-     Code, prior Modifications used by a Contributor, and the Modifications
-     made by that particular Contributor.
-
-     1.3. "Covered Code" means the Original Code or Modifications or the
-     combination of the Original Code and Modifications, in each case
-     including portions thereof.
-
-     1.4. "Electronic Distribution Mechanism" means a mechanism generally
-     accepted in the software development community for the electronic
-     transfer of data.
-
-     1.5. "Executable" means Covered Code in any form other than Source
-     Code.
-
-     1.6. "Initial Developer" means the individual or entity identified
-     as the Initial Developer in the Source Code notice required by Exhibit
-     A.
-
-     1.7. "Larger Work" means a work which combines Covered Code or
-     portions thereof with code not governed by the terms of this License.
-
-     1.8. "License" means this document.
-
-     1.8.1. "Licensable" means having the right to grant, to the maximum
-     extent possible, whether at the time of the initial grant or
-     subsequently acquired, any and all of the rights conveyed herein.
-
-     1.9. "Modifications" means any addition to or deletion from the
-     substance or structure of either the Original Code or any previous
-     Modifications. When Covered Code is released as a series of files, a
-     Modification is:
-          A. Any addition to or deletion from the contents of a file
-          containing Original Code or previous Modifications.
-
-          B. Any new file that contains any part of the Original Code or
-          previous Modifications.
-
-     1.10. "Original Code" means Source Code of computer software code
-     which is described in the Source Code notice required by Exhibit A as
-     Original Code, and which, at the time of its release under this
-     License is not already Covered Code governed by this License.
-
-     1.10.1. "Patent Claims" means any patent claim(s), now owned or
-     hereafter acquired, including without limitation,  method, process,
-     and apparatus claims, in any patent Licensable by grantor.
-
-     1.11. "Source Code" means the preferred form of the Covered Code for
-     making modifications to it, including all modules it contains, plus
-     any associated interface definition files, scripts used to control
-     compilation and installation of an Executable, or source code
-     differential comparisons against either the Original Code or another
-     well known, available Covered Code of the Contributor's choice. The
-     Source Code can be in a compressed or archival form, provided the
-     appropriate decompression or de-archiving software is widely available
-     for no charge.
-
-     1.12. "You" (or "Your")  means an individual or a legal entity
-     exercising rights under, and complying with all of the terms of, this
-     License or a future version of this License issued under Section 6.1.
-     For legal entities, "You" includes any entity which controls, is
-     controlled by, or is under common control with You. For purposes of
-     this definition, "control" means (a) the power, direct or indirect,
-     to cause the direction or management of such entity, whether by
-     contract or otherwise, or (b) ownership of more than fifty percent
-     (50%) of the outstanding shares or beneficial ownership of such
-     entity.
-
-2. Source Code License.
-
-     2.1. The Initial Developer Grant.
-     The Initial Developer hereby grants You a world-wide, royalty-free,
-     non-exclusive license, subject to third party intellectual property
-     claims:
-          (a)  under intellectual property rights (other than patent or
-          trademark) Licensable by Initial Developer to use, reproduce,
-          modify, display, perform, sublicense and distribute the Original
-          Code (or portions thereof) with or without Modifications, and/or
-          as part of a Larger Work; and
-
-          (b) under Patents Claims infringed by the making, using or
-          selling of Original Code, to make, have made, use, practice,
-          sell, and offer for sale, and/or otherwise dispose of the
-          Original Code (or portions thereof).
-
-          (c) the licenses granted in this Section 2.1(a) and (b) are
-          effective on the date Initial Developer first distributes
-          Original Code under the terms of this License.
-
-          (d) Notwithstanding Section 2.1(b) above, no patent license is
-          granted: 1) for code that You delete from the Original Code; 2)
-          separate from the Original Code;  or 3) for infringements caused
-          by: i) the modification of the Original Code or ii) the
-          combination of the Original Code with other software or devices.
-
-     2.2. Contributor Grant.
-     Subject to third party intellectual property claims, each Contributor
-     hereby grants You a world-wide, royalty-free, non-exclusive license
-
-          (a)  under intellectual property rights (other than patent or
-          trademark) Licensable by Contributor, to use, reproduce, modify,
-          display, perform, sublicense and distribute the Modifications
-          created by such Contributor (or portions thereof) either on an
-          unmodified basis, with other Modifications, as Covered Code
-          and/or as part of a Larger Work; and
-
-          (b) under Patent Claims infringed by the making, using, or
-          selling of  Modifications made by that Contributor either alone
-          and/or in combination with its Contributor Version (or portions
-          of such combination), to make, use, sell, offer for sale, have
-          made, and/or otherwise dispose of: 1) Modifications made by that
-          Contributor (or portions thereof); and 2) the combination of
-          Modifications made by that Contributor with its Contributor
-          Version (or portions of such combination).
-
-          (c) the licenses granted in Sections 2.2(a) and 2.2(b) are
-          effective on the date Contributor first makes Commercial Use of
-          the Covered Code.
-
-          (d)    Notwithstanding Section 2.2(b) above, no patent license is
-          granted: 1) for any code that Contributor has deleted from the
-          Contributor Version; 2)  separate from the Contributor Version;
-          3)  for infringements caused by: i) third party modifications of
-          Contributor Version or ii)  the combination of Modifications made
-          by that Contributor with other software  (except as part of the
-          Contributor Version) or other devices; or 4) under Patent Claims
-          infringed by Covered Code in the absence of Modifications made by
-          that Contributor.
-
-3. Distribution Obligations.
-
-     3.1. Application of License.
-     The Modifications which You create or to which You contribute are
-     governed by the terms of this License, including without limitation
-     Section 2.2. The Source Code version of Covered Code may be
-     distributed only under the terms of this License or a future version
-     of this License released under Section 6.1, and You must include a
-     copy of this License with every copy of the Source Code You
-     distribute. You may not offer or impose any terms on any Source Code
-     version that alters or restricts the applicable version of this
-     License or the recipients' rights hereunder. However, You may include
-     an additional document offering the additional rights described in
-     Section 3.5.
-
-     3.2. Availability of Source Code.
-     Any Modification which You create or to which You contribute must be
-     made available in Source Code form under the terms of this License
-     either on the same media as an Executable version or via an accepted
-     Electronic Distribution Mechanism to anyone to whom you made an
-     Executable version available; and if made available via Electronic
-     Distribution Mechanism, must remain available for at least twelve (12)
-     months after the date it initially became available, or at least six
-     (6) months after a subsequent version of that particular Modification
-     has been made available to such recipients. You are responsible for
-     ensuring that the Source Code version remains available even if the
-     Electronic Distribution Mechanism is maintained by a third party.
-
-     3.3. Description of Modifications.
-     You must cause all Covered Code to which You contribute to contain a
-     file documenting the changes You made to create that Covered Code and
-     the date of any change. You must include a prominent statement that
-     the Modification is derived, directly or indirectly, from Original
-     Code provided by the Initial Developer and including the name of the
-     Initial Developer in (a) the Source Code, and (b) in any notice in an
-     Executable version or related documentation in which You describe the
-     origin or ownership of the Covered Code.
-
-     3.4. Intellectual Property Matters
-          (a) Third Party Claims.
-          If Contributor has knowledge that a license under a third party's
-          intellectual property rights is required to exercise the rights
-          granted by such Contributor under Sections 2.1 or 2.2,
-          Contributor must include a text file with the Source Code
-          distribution titled "LEGAL" which describes the claim and the
-          party making the claim in sufficient detail that a recipient will
-          know whom to contact. If Contributor obtains such knowledge after
-          the Modification is made available as described in Section 3.2,
-          Contributor shall promptly modify the LEGAL file in all copies
-          Contributor makes available thereafter and shall take other steps
-          (such as notifying appropriate mailing lists or newsgroups)
-          reasonably calculated to inform those who received the Covered
-          Code that new knowledge has been obtained.
-
-          (b) Contributor APIs.
-          If Contributor's Modifications include an application programming
-          interface and Contributor has knowledge of patent licenses which
-          are reasonably necessary to implement that API, Contributor must
-          also include this information in the LEGAL file.
-
-               (c)    Representations.
-          Contributor represents that, except as disclosed pursuant to
-          Section 3.4(a) above, Contributor believes that Contributor's
-          Modifications are Contributor's original creation(s) and/or
-          Contributor has sufficient rights to grant the rights conveyed by
-          this License.
-
-     3.5. Required Notices.
-     You must duplicate the notice in Exhibit A in each file of the Source
-     Code.  If it is not possible to put such notice in a particular Source
-     Code file due to its structure, then You must include such notice in a
-     location (such as a relevant directory) where a user would be likely
-     to look for such a notice.  If You created one or more Modification(s)
-     You may add your name as a Contributor to the notice described in
-     Exhibit A.  You must also duplicate this License in any documentation
-     for the Source Code where You describe recipients' rights or ownership
-     rights relating to Covered Code.  You may choose to offer, and to
-     charge a fee for, warranty, support, indemnity or liability
-     obligations to one or more recipients of Covered Code. However, You
-     may do so only on Your own behalf, and not on behalf of the Initial
-     Developer or any Contributor. You must make it absolutely clear than
-     any such warranty, support, indemnity or liability obligation is
-     offered by You alone, and You hereby agree to indemnify the Initial
-     Developer and every Contributor for any liability incurred by the
-     Initial Developer or such Contributor as a result of warranty,
-     support, indemnity or liability terms You offer.
-
-     3.6. Distribution of Executable Versions.
-     You may distribute Covered Code in Executable form only if the
-     requirements of Section 3.1-3.5 have been met for that Covered Code,
-     and if You include a notice stating that the Source Code version of
-     the Covered Code is available under the terms of this License,
-     including a description of how and where You have fulfilled the
-     obligations of Section 3.2. The notice must be conspicuously included
-     in any notice in an Executable version, related documentation or
-     collateral in which You describe recipients' rights relating to the
-     Covered Code. You may distribute the Executable version of Covered
-     Code or ownership rights under a license of Your choice, which may
-     contain terms different from this License, provided that You are in
-     compliance with the terms of this License and that the license for the
-     Executable version does not attempt to limit or alter the recipient's
-     rights in the Source Code version from the rights set forth in this
-     License. If You distribute the Executable version under a different
-     license You must make it absolutely clear that any terms which differ
-     from this License are offered by You alone, not by the Initial
-     Developer or any Contributor. You hereby agree to indemnify the
-     Initial Developer and every Contributor for any liability incurred by
-     the Initial Developer or such Contributor as a result of any such
-     terms You offer.
-
-     3.7. Larger Works.
-     You may create a Larger Work by combining Covered Code with other code
-     not governed by the terms of this License and distribute the Larger
-     Work as a single product. In such a case, You must make sure the
-     requirements of this License are fulfilled for the Covered Code.
-
-4. Inability to Comply Due to Statute or Regulation.
-
-     If it is impossible for You to comply with any of the terms of this
-     License with respect to some or all of the Covered Code due to
-     statute, judicial order, or regulation then You must: (a) comply with
-     the terms of this License to the maximum extent possible; and (b)
-     describe the limitations and the code they affect. Such description
-     must be included in the LEGAL file described in Section 3.4 and must
-     be included with all distributions of the Source Code. Except to the
-     extent prohibited by statute or regulation, such description must be
-     sufficiently detailed for a recipient of ordinary skill to be able to
-     understand it.
-
-5. Application of this License.
-
-     This License applies to code to which the Initial Developer has
-     attached the notice in Exhibit A and to related Covered Code.
-
-6. Versions of the License.
-
-     6.1. New Versions.
-     Netscape Communications Corporation ("Netscape") may publish revised
-     and/or new versions of the License from time to time. Each version
-     will be given a distinguishing version number.
-
-     6.2. Effect of New Versions.
-     Once Covered Code has been published under a particular version of the
-     License, You may always continue to use it under the terms of that
-     version. You may also choose to use such Covered Code under the terms
-     of any subsequent version of the License published by Netscape. No one
-     other than Netscape has the right to modify the terms applicable to
-     Covered Code created under this License.
-
-     6.3. Derivative Works.
-     If You create or use a modified version of this License (which you may
-     only do in order to apply it to code which is not already Covered Code
-     governed by this License), You must (a) rename Your license so that
-     the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape",
-     "MPL", "NPL" or any confusingly similar phrase do not appear in your
-     license (except to note that your license differs from this License)
-     and (b) otherwise make it clear that Your version of the license
-     contains terms which differ from the Mozilla Public License and
-     Netscape Public License. (Filling in the name of the Initial
-     Developer, Original Code or Contributor in the notice described in
-     Exhibit A shall not of themselves be deemed to be modifications of
-     this License.)
-
-7. DISCLAIMER OF WARRANTY.
-
-     COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS,
-     WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
-     WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF
-     DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING.
-     THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE
-     IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT,
-     YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE
-     COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER
-     OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF
-     ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
-
-8. TERMINATION.
-
-     8.1.  This License and the rights granted hereunder will terminate
-     automatically if You fail to comply with terms herein and fail to cure
-     such breach within 30 days of becoming aware of the breach. All
-     sublicenses to the Covered Code which are properly granted shall
-     survive any termination of this License. Provisions which, by their
-     nature, must remain in effect beyond the termination of this License
-     shall survive.
-
-     8.2.  If You initiate litigation by asserting a patent infringement
-     claim (excluding declatory judgment actions) against Initial Developer
-     or a Contributor (the Initial Developer or Contributor against whom
-     You file such action is referred to as "Participant")  alleging that:
-
-     (a)  such Participant's Contributor Version directly or indirectly
-     infringes any patent, then any and all rights granted by such
-     Participant to You under Sections 2.1 and/or 2.2 of this License
-     shall, upon 60 days notice from Participant terminate prospectively,
-     unless if within 60 days after receipt of notice You either: (i)
-     agree in writing to pay Participant a mutually agreeable reasonable
-     royalty for Your past and future use of Modifications made by such
-     Participant, or (ii) withdraw Your litigation claim with respect to
-     the Contributor Version against such Participant.  If within 60 days
-     of notice, a reasonable royalty and payment arrangement are not
-     mutually agreed upon in writing by the parties or the litigation claim
-     is not withdrawn, the rights granted by Participant to You under
-     Sections 2.1 and/or 2.2 automatically terminate at the expiration of
-     the 60 day notice period specified above.
-
-     (b)  any software, hardware, or device, other than such Participant's
-     Contributor Version, directly or indirectly infringes any patent, then
-     any rights granted to You by such Participant under Sections 2.1(b)
-     and 2.2(b) are revoked effective as of the date You first made, used,
-     sold, distributed, or had made, Modifications made by that
-     Participant.
-
-     8.3.  If You assert a patent infringement claim against Participant
-     alleging that such Participant's Contributor Version directly or
-     indirectly infringes any patent where such claim is resolved (such as
-     by license or settlement) prior to the initiation of patent
-     infringement litigation, then the reasonable value of the licenses
-     granted by such Participant under Sections 2.1 or 2.2 shall be taken
-     into account in determining the amount or value of any payment or
-     license.
-
-     8.4.  In the event of termination under Sections 8.1 or 8.2 above,
-     all end user license agreements (excluding distributors and resellers)
-     which have been validly granted by You or any distributor hereunder
-     prior to termination shall survive termination.
-
-9. LIMITATION OF LIABILITY.
-
-     UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT
-     (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL
-     DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,
-     OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
-     ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
-     CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL,
-     WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
-     COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN
-     INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF
-     LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY
-     RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW
-     PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE
-     EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
-     THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
-
-10. U.S. GOVERNMENT END USERS.
-
-     The Covered Code is a "commercial item," as that term is defined in
-     48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer
-     software" and "commercial computer software documentation," as such
-     terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48
-     C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995),
-     all U.S. Government End Users acquire Covered Code with only those
-     rights set forth herein.
-
-11. MISCELLANEOUS.
-
-     This License represents the complete agreement concerning subject
-     matter hereof. If any provision of this License is held to be
-     unenforceable, such provision shall be reformed only to the extent
-     necessary to make it enforceable. This License shall be governed by
-     California law provisions (except to the extent applicable law, if
-     any, provides otherwise), excluding its conflict-of-law provisions.
-     With respect to disputes in which at least one party is a citizen of,
-     or an entity chartered or registered to do business in the United
-     States of America, any litigation relating to this License shall be
-     subject to the jurisdiction of the Federal Courts of the Northern
-     District of California, with venue lying in Santa Clara County,
-     California, with the losing party responsible for costs, including
-     without limitation, court costs and reasonable attorneys' fees and
-     expenses. The application of the United Nations Convention on
-     Contracts for the International Sale of Goods is expressly excluded.
-     Any law or regulation which provides that the language of a contract
-     shall be construed against the drafter shall not apply to this
-     License.
-
-12. RESPONSIBILITY FOR CLAIMS.
-
-     As between Initial Developer and the Contributors, each party is
-     responsible for claims and damages arising, directly or indirectly,
-     out of its utilization of rights under this License and You agree to
-     work with Initial Developer and Contributors to distribute such
-     responsibility on an equitable basis. Nothing herein is intended or
-     shall be deemed to constitute any admission of liability.
-
-13. MULTIPLE-LICENSED CODE.
-
-     Initial Developer may designate portions of the Covered Code as
-     "Multiple-Licensed".  "Multiple-Licensed" means that the Initial
-     Developer permits you to utilize portions of the Covered Code under
-     Your choice of the NPL or the alternative licenses, if any, specified
-     by the Initial Developer in the file described in Exhibit A.
-
-     EXHIBIT A-Netscape Public License.
-
-          "The contents of this file are subject to the Netscape Public
-          License Version 1.1 (the "License"); you may not use this file
-          except in compliance with the License. You may obtain a copy of
-          the License at http://www.mozilla.org/NPL/
-
-          Software distributed under the License is distributed on an "AS
-          IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-          implied. See the License for the specific language governing
-          rights and limitations under the License.
-
-          The Original Code is the Netscape Mailstone code, released
-          March 17, 2000.
-
-          The Initial Developer of the Original Code is Netscape
-          Communications Corporation. Portions created by Netscape are
-          Copyright (C) 1999-2000 Netscape Communications Corporation. All
-          Rights Reserved.
-
-          Contributor(s): Dan Christian <robodan@netscape.com>
-			  Marcel DePaolis <marcel@netscape.com>
-			  Jim Salter <jsalter@netscape.com>
-			  Mike Blakely, David Shak, Brain Williams
-
-          Alternatively, the contents of this file may be used under the
-          terms of the GNU General Public license Version 2 or later
-	  (the "GPL"), in which case the provisions of GPL are
-	  applicable instead of those above.  If you wish to allow use
- 	  of your version of this file only under the terms of the GPL
-	  and not to allow others to use your version of this file
-	  under the NPL, indicate your decision by deleting the
-	  provisions above and replace them with the notice and other
-	  provisions required by the GPL.  If you do not delete the
-	  provisions above, a recipient may use your version of this
-	  file under either the NPL or the GPL License."
-
-     ----------------------------------------------------------------------
-
-     AMENDMENTS
-
-     The Netscape Public License Version 1.1 ("NPL") consists of the
-     Mozilla Public License Version 1.1 with the following Amendments,
-     including Exhibit A-Netscape Public License.  Files identified with
-     "Exhibit A-Netscape Public License" are governed by the Netscape
-     Public License Version 1.1.
-
-     Additional Terms applicable to the Netscape Public License.
-          I. Effect.
-          These additional terms described in this Netscape Public
-          License -- Amendments shall apply to the Mozilla Communicator
-          client code and to all Covered Code under this License.
-
-          II. "Netscape's Branded Code" means Covered Code that Netscape
-          distributes and/or permits others to distribute under one or more
-          trademark(s) which are controlled by Netscape but which are not
-          licensed for use under this License.
-
-          III. Netscape and logo.
-          This License does not grant any rights to use the trademarks
-          "Netscape", the "Netscape N and horizon" logo or the "Netscape
-          lighthouse" logo, "Netcenter", "Gecko", "Java" or "JavaScript",
-          "Smart Browsing" even if such marks are included in the Original
-          Code or Modifications.
-
-          IV. Inability to Comply Due to Contractual Obligation.
-          Prior to licensing the Original Code under this License, Netscape
-          has licensed third party code for use in Netscape's Branded Code.
-          To the extent that Netscape is limited contractually from making
-          such third party code available under this License, Netscape may
-          choose to reintegrate such code into Covered Code without being
-          required to distribute such code in Source Code form, even if
-          such code would otherwise be considered "Modifications" under
-          this License.
-
-          V. Use of Modifications and Covered Code by Initial Developer.
-               V.1. In General.
-               The obligations of Section 3 apply to Netscape, except to
-               the extent specified in this Amendment, Section V.2 and V.3.
-
-               V.2. Other Products.
-               Netscape may include Covered Code in products other than the
-               Netscape's Branded Code which are released by Netscape
-               during the two (2) years following the release date of the
-               Original Code, without such additional products becoming
-               subject to the terms of this License, and may license such
-               additional products on different terms from those contained
-               in this License.
-
-               V.3. Alternative Licensing.
-               Netscape may license the Source Code of Netscape's Branded
-               Code, including Modifications incorporated therein, without
-               such Netscape Branded Code becoming subject to the terms of
-               this License, and may license such Netscape Branded Code on
-               different terms from those contained in this License.
-
-          VI. Litigation.
-          Notwithstanding the limitations of Section 11 above, the
-          provisions regarding litigation in Section 11(a), (b) and (c) of
-          the License shall apply to all disputes relating to this License.
-

mozilla/mstone/Makefile

@@ -1,246 +0,0 @@
-# Makefile for mstone
-# use gmake
-# Builds each of the components and then packages everything
-
-topsrcdir	= .
-
-CP := cp -p
-
-ifndef INCLUDED_CONFIG_MK
-include $(topsrcdir)/config/config.mk
-endif
-
-
-# dynamically find the optional directories names
-LIBGD_DIR	= $(wildcard gd?.*)
-GNUPLOT_DIR	= $(wildcard gnuplot-?.*)
-PERL_DIR	= $(wildcard perl5.*)
-
-# file that we package
-GDFILES		= gd.txt gd.html libgd.* gd.h demoin.gif gddemo giftogd webgif
-GNUPLOTFILES	= gnuplot Copyright gnuplot_x11 gnuplot.1 gnuplot.gih 
-
-VERSION		= 4.3
-TARBALL		= mstone-$(VERSION)-$(NSARCH)$(OBJDIR_TAG).tar.gz
-ZIPFILE		= mstone-$(VERSION)-$(NSARCH)$(OBJDIR_TAG).zip
-TARBALL_ALL	= mstone-$(VERSION)-all$(OBJDIR_TAG).tar.gz
-ZIPFILE_ALL	= mstone-$(VERSION)-all$(OBJDIR_TAG).zip
-
-NTFILES		= mstone.bat process.bat setup.bat
-
-all:: usage
-
-usage::
-	@$(ECHO) "gmake [ release | rpackage | debug | dpackage ]"
-	@$(ECHO) "      [ DIST=/m/dist/mailstone/1999xxxx dist ]"
-	@$(ECHO) "      [ all_DBG | all_OPT ]"
-	@$(ECHO) "perl is" $(PERL_DIR) ". gd is" $(LIBGD_DIR) ". gnuplot is" $(GNUPLOT_DIR) "."
-
-targets::	$(OBJDIR) mailclient
-
-ifneq (,$(LIBGD_DIR))
-targets::	libgd
-endif
-
-ifneq (,$(GNUPLOT_DIR))
-targets::	gnuplot
-endif
-
-ifneq (,$(PERL_DIR))
-targets::	perl
-endif
-
-$(OBJDIR):
-	-mkdir -p $(OBJDIR)
-
-mailclient::
-	@$(ECHO) "\n===== [`date`] making OS_CONFIG=$(NSARCH) BUILD_VARIANT=$(BUILD_VARIANT)\n"
-	cd src; $(MAKE) BUILD_VARIANT=$(BUILD_VARIANT) OBJDIR=../$(OBJDIR) PKGDIR=../$(PKGDIR) all
-
-# Use our top level makefiles to drive the component builds
-libgd $(OBJDIR)/gd/libgd.a::
-	$(MAKE) -f gd.mk LIBGD_DIR=$(LIBGD_DIR) libgd
-
-gnuplot $(OBJDIR)/gnuplot/gnuplot::
-	$(MAKE) -f gnuplot.mk LIBGD_DIR=$(LIBGD_DIR) GNUPLOT_DIR=$(GNUPLOT_DIR) gnuplot
-
-perl $(OBJDIR)/perl/perl::
-	$(MAKE) -f perl.mk PERL_DIR=$(PERL_DIR) perl
-
-# Create packaging binary directories
-# Note: dont make gd or gnuplot here.  For multi-OS, they are links
-mkpkgdirs::	$(PKGDIR)/bin $(PKGDIR)/conf $(PKGDIR)/data $(PKGDIR)/doc
-
-$(PKGDIR)/bin:
-	mkdir -p $(PKGDIR)/bin
-
-$(PKGDIR)/conf:
-	mkdir -p $(PKGDIR)/conf
-
-$(PKGDIR)/data:
-	mkdir -p $(PKGDIR)/data
-
-$(PKGDIR)/doc:
-	mkdir -p $(PKGDIR)/doc
-
-$(PKGDIR)/gd:
-	mkdir -p $(PKGDIR)/gd
-
-$(PKGDIR)/gnuplot:
-	mkdir -p $(PKGDIR)/gnuplot
-
-$(PKGDIR)/perl:
-	mkdir -p $(PKGDIR)/perl
-
-
-# operating system independent share-files (at least for Unix)
-pkg-share-files:: mkpkgdirs
-	@$(ECHO) "\n===== [`date`] making package share-files...\n"
-	$(CP) mstone process $(PKGDIR)
-	(cd $(PKGDIR); [ ! -f setup ] || rm -f setup; ln -s mstone setup)
-	(cd $(PKGDIR); [ ! -f cleanup ] || rm -f cleanup; ln -s mstone cleanup)
-	(cd $(PKGDIR); [ ! -f checktime ] || rm -f checktime; ln -s mstone checktime)
-	(cd $(PKGDIR); [ ! -f timesync ] || rm -f timesync; ln -s mstone timesync)
-	-$(CP) nsarch bin/*.pl $(PKGDIR)/bin
-	-$(CP) conf/*.wld conf/*.wld.in conf/*.html $(PKGDIR)/conf
-	-$(CP) data/*.msg $(PKGDIR)/data
-	-$(CP) doc/*.html doc/*.gif $(PKGDIR)/doc
-	-$(CP) INSTALL $(PKGDIR)
-	-$(CP) README $(PKGDIR)
-	-$(CP) ChangeLog $(PKGDIR)
-	-$(CP) LICENSE $(PKGDIR)
-
-# split out OS specific file so that combined packaging possible (set PKGDIR)
-pkg-arch-files-gd::	 $(PKGDIR)/gd $(OBJDIR)/gd/libgd.a
-	$(CP) $(addprefix $(OBJDIR)/gd/, $(GDFILES)) $(PKGDIR)/gd
-	-$(STRIP) $(PKGDIR)/gd/webgif $(PKGDIR)/gd/giftogd $(PKGDIR)/gd/gddemo
-
-pkg-arch-files-gnuplot::	$(PKGDIR)/gnuplot $(OBJDIR)/gnuplot/gnuplot
-	$(CP) $(addprefix $(OBJDIR)/gnuplot/, $(GNUPLOTFILES)) $(PKGDIR)/gnuplot
-	-$(STRIP) $(PKGDIR)/gnuplot/gnuplot $(PKGDIR)/gnuplot/gnuplot_x11
-
-ifneq (,$(LIBGD_DIR))
-pkg-arch-files::	pkg-arch-files-gd
-endif
-
-ifneq (,$(GNUPLOT_DIR))
-pkg-arch-files::	pkg-arch-files-gnuplot
-endif
-
-pkg-arch-files::	$(PKGDIR)/bin $(OBJDIR)/mailclient
-	@$(ECHO) "\n===== [`date`] making package arch-files...\n"
-	$(CP) $(OBJDIR)/mailclient $(PKGDIR)/bin
-	-$(STRIP) $(PKGDIR)/bin/mailclient
-
-pkg-perl-files:: $(PKGDIR)/bin $(OBJDIR)/perl/perl
-	@$(ECHO) "\n===== [`date`] making package perl-files...\n"
-	$(MAKE) -f perl.mk PERL_DIR=$(PERL_DIR) \
-		BUILD_VARIANT=$(BUILD_VARIANT) \
-		OBJDIR=$(OBJDIR) PKGDIR=$(PKGDIR) package-perl
-	find $(PKGDIR)/perl/lib -name .packlist -exec rm {} \; -print
-	-$(STRIP) $(PKGDIR)/perl/bin/perl
-	-$(STRIP) $(PKGDIR)/perl/bin/a2p
-
-# for combined packaging, this should not be part of pkg-arch-files
-# perl is handled seperately do to its size
-ifneq (,$(PERL_DIR))
-pkg::	pkg-perl-files
-endif
-
-pkg::	targets pkg-share-files pkg-arch-files
-
-tarball:	build/$(TARBALL)
-
-build/$(TARBALL):
-	@$(ECHO) "\n===== [`date`] making os tar file...\n"
-	-rm -f build/$(TARBALL)
-	cd $(dir $(PKGDIR)) && tar cf - . | gzip > ../../$(TARBALL)
-
-zipfile:	build/$(ZIPFILE)
-
-build/$(ZIPFILE):
-	@$(ECHO) "\n===== [`date`] making os zip file...\n"
-	-rm -f build/$(ZIPFILE)
-	cd $(dir $(PKGDIR)) && zip -r -q ../../$(ZIPFILE) .
-
-
-########################################################################
-# Generate a combined build for every Unix OS that is already packaged
-# NT has to be done seperately because it has different file names
-# We have to nuke some old parts, because permissions wont allow overwrites
-# Finally, dont ship perl development headers and libraries
-all_DBG all_OPT::
-	@$(ECHO) "===== [`date`] unified packaging for $@..."
-	$(MAKE) NSARCH=$@ OBJDIR_TAG='' \
-		PKGDIR=$(topsrcdir)/build/package/$@.OBJ/mstone pkg-share-files
-	./ospkg.sh $@.OBJ \
-	    $(notdir $(shell ls -d build/package/[A-Z]*$(subst all,,$@.OBJ)))
-	[ -d $(topsrcdir)/build/package/$@.OBJ/mstone/bin/WINNT4.0 ] \
-		&& cp -p $(NTFILES) $(topsrcdir)/build/package/$@.OBJ/mstone; :
-	-rm -f ./build/mstone-$(VERSION)-$@.tar.gz
-	cd ./build/package/$@.OBJ \
-		&& tar cf - . | gzip > ../../mstone-$(VERSION)-$@.tar.gz
-	-rm -f ./build/mstone-$(VERSION)-$@.zip
-	cd ./build/package/$@.OBJ \
-		&& zip -r -q ../../mstone-$(VERSION)-$@.zip .
-
-
-########################################################################
-# Copy all the packaged trees to the distribution site
-# Copy in the unified tarball and zip file
-# Link mstone to mailstone for Netscape back compatibility
-# Re-map short Linux name to standard Netscape convention
-dist::
-	@[ "$(DIST)" != "" ] || ($(MAKE) usage && /bin/false)
-	@[ ! -d "$(DIST)" ] || ($(ECHO) "Error: $(DIST) already exists" && \
-		$(MAKE) usage && /bin/false)
-	mkdir -p $(DIST)
-	cp -p build/mstone-$(VERSION)-all_*.*[a-z] $(DIST)/
-	(cd build/package; tar cf - *.OBJ) | (cd $(DIST); tar xf - )
-	for l in $(DIST)/*_???.OBJ ; do \
-		(cd $$l; ln -s mstone mailstone); done
-	cd $(DIST); for l in Linux*_???.OBJ ; do \
-		nn=`echo $$l | sed -e 's/_OPT/_glibc_PTH_OPT/' | sed -e 's/_DBG/_glibc_PTH_DBG/'`; \
-		ln -s $$l $$nn; done
-
-# since the default is release mode, this can just work off a dependency
-release::	targets
-#release::
-#	@$(ECHO) "\n===== [`date`] making release build..."
-#	$(MAKE) BUILD_VARIANT=release OBJDIR_TAG=_OPT targets
-	@$(ECHO) "\n===== [`date`] making release build done."
-
-rpackage:: release pkg #tarball zipfile
-#rpackage:: release
-#	@$(ECHO) "\n===== [`date`] making release package..."
-#	$(MAKE) BUILD_VARIANT=release OBJDIR_TAG=_OPT pkg tarball zipfile
-	@$(ECHO) "\n===== [`date`] making release package done."
-
-# since the default is release mode, start a make with the right mode
-debug::	
-	@$(ECHO) "\n===== [`date`] making debug build..."
-	$(MAKE) BUILD_VARIANT=debug OBJDIR_TAG=_DBG targets
-	@$(ECHO) "\n===== [`date`] making debug build done."
-
-# We dont usually bother to tar up a debug build
-dpackage:: debug
-	@$(ECHO) "\n===== [`date`] making debug package..."
-	$(MAKE) BUILD_VARIANT=debug OBJDIR_TAG=_DBG pkg
-	@$(ECHO) "\n===== [`date`] making debug package done."
-
-# These are old and may be broken
-cleanvariant::
-	(cd src; $(MAKE) OBJDIR=../$(OBJDIR) clean)
-	rm -rf $(PKGDIR)
-
-clean::
-	$(MAKE) BUILD_VARIANT=release OBJDIR_TAG=_OPT cleanvariant
-	$(MAKE) BUILD_VARIANT=debug OBJDIR_TAG=_DBG cleanvariant
-
-distcleanvariant::
-	(cd src; $(MAKE) OBJDIR=../$(OBJDIR) distclean)
-	rm -rf $(OBJDIR) $(PKGDIR)
-
-distclean:: clean
-	$(MAKE) BUILD_VARIANT=release OBJDIR_TAG=_OPT distcleanvariant
-	$(MAKE) BUILD_VARIANT=debug OBJDIR_TAG=_DBG distcleanvariant

mozilla/mstone/README

@@ -1,75 +0,0 @@
-
-                    MSTONE 4.2
-
-Mstone is a mail server performance testing tool designed to simulate
-the different types and volume of mail traffic a mail server would
-experience during a peak activity period.  Mstone was formerly known
-as Mailstone.
-
-A quick installation guide is available in INSTALL.
-
-The full Mailstone 4.15 user manual is available at
-http://lxr.mozilla.org/mozilla/source/mstone/doc/MailStone.html
-
-Testing strategy
-----------------
-
-Mstone is capable of opening SMTP, POP3, IMAP4, and other protocol
-connections to mail servers.  The number and type of connections made
-to the mail server is based on a weighted command list which provides
-the ability to test mail server implementation requirements.
-
-A series of perl script allow you to setup client machines, run tests,
-and then cleanup client machine files.  Each client machine has a copy
-of the mailclient program and SMTP message files.  When the test is
-run, the mailclient is started with the proper command line and work load.
-
-After experimenting with mstone loads, you will notice that there
-are a few factors that can distort server the byte and message
-throughput.  You will find that the server byte throughput is related
-to the average SMTP message (file) size.  Also, server throughput, in
-bytes and messages, is affected by larger than normal POP3/IMAP4
-mailboxes.  So it is important to approach the mstone command
-configuration with data collected from existing mail server
-implementations, for example, a customer might say "during our peak
-activity in the morning, we handle up to two thousand employees
-sending an average of 5 messages of 20K average size and receiving 25
-messages of same size". With input like this, you can begin tuning
-mstone to generate relevant data.
-
-There are two important things to consider when reviewing the results of
-mstone performance analysis:  Was the test run on target for
-simulating the type and volume of mail traffic; and did the server, both
-software and machine, handle the load within an acceptable margin?
-
-With this information, it can be determined: whether enough SMTP
-connections were made to the server during the run, and how many
-messages were downloaded over how many POP3/IMAP4 connections.  If the
-number of SMTP connections is not in the acceptable range, then
-consider adding more client processes/machines or checking the server
-performance during the run.  The message/connection ratio for
-POP3/IMAP4 should be checked for soundness, and adjustments should be
-made to the mailboxes before running the next test.
-
-Monitoring the server performance during test runs is crucial in
-understanding the results.  If the number of client connections is not
-being achieved and the server cpu usage and process run queue is not
-settling down after the initial spike, then modifications to the server
-architecture could be in order.
-
-The analysis of mstone results is an iterative process of client
-(mstone client) and server tuning.  The bottom line is to determine
-whether the messaging solution can handle the type of load expected in
-an acceptable manner.
-
-
-Server Log Tuning
------------------
-The Messaging and Directory server ship with access logging enabled by
-default.  This gives the most information about what is going on in
-the system, but can reduce performance.  You should test the way the
-system will be run.  
-
-Noticeable performance increases are often obtained by disabling access
-logging on the directory server and by reducing the logging level of
-the messaging servers from "Notice" to "Warning".

mozilla/mstone/README.Sendmail-contributions

@@ -1,16 +0,0 @@
-Under the terms of the Mozilla Public License, Version 1.1, granted
-by Mozilla, Sendmail Inc. is contributing the following Source Code
-changes to the Mozilla mstone source repository.
-
-Sendmail, Inc. is making available these source code modifications
-according to the Distribution Obligations as listed in section 3
-of the Mozilla Public License, Version 1.1
-
-The changes provided herein are described in the included files:
-
-  README.Sendmail-mstone_changes.html
-  ChangeLog-Sendmail
-
-All modifications are derived, directly or indirectly, from the original
-code as provided by Mozilla.
-

mozilla/mstone/README.Sendmail-mstone_changes.html

@@ -1,419 +0,0 @@
-<html>
-<head><title>Sendmail, Inc. Mstone changes</title></head>
-<body>
-
-<h3>Mstone modifications</h3>
-
-<ol>
-<li><h4>Random Variable Parameters</h4>
-
-In addition to taking on constant values, some parameters can now be
-sampled from probability distributions.  These variables are:
-<ul>
-<li><code>startDelay</code>
-<li><code>idleTime</code>
-<li><code>blockTime</code>
-<li><code>loopDelay</code>
-<li><code>numRecips</code>
-<li><code>size</code>
-<li><code>headers</code>
-<li><code>mime</code>
-<li><code>leaveMailOnServer</code>
-<li><code>bandwidth</code>
-<li><code>latency</code>
-</ul>
-
-<p>
-The following distributions are currently implemented:
-<ul>
-<li>Uniform (~unif(a, b))
-<li>Normal (~normal(a, b))
-<li>Log-Normal (~lognormal(a, b))
-<li>Weibull (~weib(a, b, c))
-<li>Exponential (~exp(a))
-<li>Constant (~const(a))
-<li>Binomial (~binomial(a))
-</ul>
-
-<p>
-Sampled values may also be constrained by a minimum and maximum value.
-This is particularly useful for e.g. the normal and lognormal
-distributions, though over-tight constraints will create a "lump" at
-the end of the generated distribution, and any constraints may change
-the distribution's characteristics (e.g. mean).  To specify
-constraints, do the following:
-
-<h5>getdist</h5>
-
-<p>
-There is also a helper tool called "getdist" in the Sendmail mstone
-distribution. Building getdist:
-
-<pre>
-  file: mstone/src/idle.c
-  # gcc -DTEST_PROB -Dxalloc=malloc -Dxfree=free -lm idle.c
-</pre>
-
-<p>
-Rename the resulting binary to "getdist"
-
-<p>
-<b>Using getdist</b>
-
-<p>
-To run it interactively:
-
-<ol>
-<li>Start up getdist</li>
-<li>Enter the distribution you want to see a sample and mean (ignore warning about 'gets()')</li>
-</ol>
-
-<p>
-Example:
-
-<pre>
-% getdist
-warning: this program uses gets(), which is unsafe.
-~lognormal(3,4.5)
-Samples:
-6.846493
-0.109578
-31.402784
-0.467486
-21.905714
-7.113645
-0.225102
-29.372181
-4.252427
-1.444493
-mean: 29.128932
-</pre>
-
-<p>
-It will only OUTPUT 10 samples as examples but the mean
-is calculated based on 2000 samples by default.  You can specify
-the mean sample size on the command line by giving it a -n option:
-
-<pre>
-% getdist -n 1000000
-</pre>
-
-<p>
-This will calculate the mean based on a sample of 1000000 entries.
-
-<p>
-The above data was calculated with 2M samples.
-
-<p>
-<i>Known Problems</i><BR>
-It appears (anecdotally) that the first set of samples returned by
-getdist are inaccurate. After starting the getdist program interactively,
-it may appear necessary to ignore the first set of output, but that entering
-the distribution again will return a more accurate result.<BR>
-
-<p>
-For example:
-
-<pre>
-# getdist
-~lognormal(10,2)
-Samples:
-670043.575395
-48.842052
-54.039792
-0.460849
-2.152179
-32.534664
-6.163511
-42.827706
-27.806642
-4.966444
-mean:   364.747532
-var:    224352671.855287
-stddev: 14978.406853
-~lognormal(10,2)
-Samples:
-1.842800
-39.760727
-4.798239
-10.722216
-27.052030
-28.923926
-61.504273
-20.743583
-5.373420
-42.195531
-mean:   25.510130
-var:    2674.124997
-stddev: 51.711942
-</pre>
-
-
-<dl>
-  <dt><code>~dist(...) : [min,]</code>
-  <dd>force all sampled values to be >= <code>min</code>
-  <dt><code>~dist(...) : [min,max]</code>
-  <dd>force all sampled values X to be <code>min</code> <= X <= <code>max</code>.
-  <dt><code>~dist(...) : [,max]</code>
-  <dd>force values to be <= <code>max</code>
-</dl>
-
-<li><h4>Parsing Changes</h4>
-
-All of the time-valued test parameters except <code>rampTime</code>
-and <code>time</code> now have millisecond values.  In particular,
-this means that a value of "17" parses to 17
-<strong>milliseconds</strong>, not 17 seconds.  Use "17s" instead.
-<p>
-
-    Size-valued parameters can have units of "k" or "m" to indicate
-kilobytes or megabytes, respectively.
-<p>
-
-    For parameters supporting random-variable values, a value starting
-with "~" will be interpreted as a random variable specification of the
-form "~NAME([ARGS ...])".  Unit suffixes (e.g. "s", and "m") apply to
-random variable parameters as well as constant values.  This implies
-that for unitless parameters, the suffixes corresponding to the random
-variable's units will still be recognized (i.e. the values will be
-multiplied by the appropriate factors).  This is probably best
-considered as a "bug" rather than excercised as a "feature."
-<p>
-
-    <code>blockTime</code>, <code>loopDelay</code>, and
-<code>idleTime</code> now refer to the total amount of time a command
-block, loop, and initialization phase should take, respectively, not
-the amount of time the simulation should stall after completing each
-phase.  For example, if a block takes 2 seconds to complete, and the
-block time is 4 seconds, the client thread will sleep for 2 seconds
-after finishing instead of the full 4.<p>
-
-<code>rampTime</code> is now solely for the benefit of the client
-machines, to control the rate at which threads are started.  The rate
-at which commands from a given protocol are started is now controlled
-by the <code>startDelay</code> variable, which is
-distribution-valued.  Thus the actual command loop now looks like
-this:
-
-<pre>
-wait for startDelay
-start counting idleTime
-start counting blockTime
-execute start function
-wait for remainder of idleTime
-for (1 ... numLoops)
-       	start counting loopDelay
-       	execute loop function
-       	wait for remainder of loopDelay
-execute	end function
-wait for remainder of blockTime
-</pre>
-
-<li><h4>Automatic Message Generation</h4>
-
-Both MIME and text/plain messages can now be generated automatically.
-To enable automatic message generation, set the <code>file</code>
-attribute of an SMTP block to "auto".  The messages will then have at
-least as many headers as the value of the <code>headers</code>
-attribute, have bodies <code>size</code> bytes long, and have
-<code>mime</code> MIME parts.  To generate text/plain messages, set
-<code>mime</code> to zero.
-
-<table border=1 cellpadding=2>
-<tr><th>Attribute</th><th>Description</th></tr>
-
-<tr>
-  <td><code>headers <i>N</i></code></td>
-  <td>(optional; default=5) Each automatically generated message will
-      have <code>min(<i>N</i>, min_hdrs)</code> headers, where
-      <code>min_hdrs</code> is 5 for text/plain, and about 7 for MIME
-      messages.  Additional headers are named
-      "X-generated-header-%d". </td>
-</tr>
-
-<tr>
-  <td><code>size <i>N</i></code></td>
-  <td>(required) Each generated message will have a body be <i>N</i>
-      bytes long.</td>
-</tr>
-
-<tr>
-  <td><code>mime <i>N</i></code></td>
-  <td>Each generated message will have <code>N</code> MIME parts.  If
-      the value of <code>size</code> does not allow <code>N</code> parts,
-      one part is generated.  If <code>N</code> is zero, the message is
-      text/plain.</td>
-</tr>
-
-<tr>
-  <td><code>checksum <i>{yes|no|save}</i></code></td>
-  <td>For SMTP: each generated message will have the MD5 sum of the
-  message body appended to the message unless the value is <i>no</i>.
-  For retrieval protocols, checksums will be verified.  (NOT
-  IMPLEMENTED: if <code>checksum</code> is <i>save</i>, messages with
-  incorrect checksums will be saved to temporary files for later
-  examination.) </td>
-</tr>
-
-</table>
-
-<li><h4>Linespeed Emulation</h4>
-
-SMTP, POP, and IMAP all support a form of linespeed emulation,
-controlled via the <code>latency</code> and <code>bandwidth</code>
-parameters.
-
-<table border=1 cellpadding=2>
-<tr><th>Attribute</th><th>Description</th></tr>
-
-<tr><td><code>latency <i>N</i></code></td>
-<td>Set the network latency to <code>N</code> milliseconds.</td></tr>
-
-<tr><td><code>bandwidth <i>N</i></code></td>
-
-<td>Transfer at most <code>N</code> bytes per second.</td></tr>
-
-</table>
-
-<li><h4>TLS support</h4>
-
-If you have openssl, mstone now supports STARTTLS for SMTP and IMAP,
-and STLS for POP (both old-style and MULTIPOP), as well as SSL
-tunneling.  This support is <strong>not</strong> well-tested, and TLS
-can be a bit tricky to set up, so use at your own risk.  TLS
-introduces several new attributes to the protocol blocks:
-
-<table border=1 cellpadding=2>
-<tr><th>Attribute</th><th>Description</th></tr>
-
-<tr><td><code>sslcert <i>filename</i></code></td>
-<td>Read the client's cert from <i>filename</i>, which should be in
-PEM format. </td></tr>
-
-<tr><td><code>sslkey <i>filename</i></code></td>
-
-<td>Read the client's private key from <i>filename</i>, which should
-be in PEM format.</td></tr>
-
-<tr><td><code>usetls {0|1}</code></td>
-
-<td>Turn STARTTLS/STLS on or off (default: off).  <b>Note</b>:
-<code>starttls</code> and <code>ssltunnel</code> are mutually
-exlcusive.</td></tr>
-
-<tr><td><code>ssltunnel {0|1}</code></td>
-
-<td>Turn SSL tunneling on or off (default: off).</td></tr>
-
-</table>
-
-<li><h4>"Multi-POP" protocol</h4>
-
-<b>Note</b>: multipop, always a band-aid, is hopefully obsoleted by
-the new event-queue execution model.  Though it has not been tested,
-it should be easier, more efficient, and more accurate to use the
-normal POP protocol with events to simulate a large number of users
-with a reasonable number of threads.  Once this has been tested,
-automatically-generated workloads should revert to using POP.
-
-<p>To simulate a large number of concurrently active POP users with
-Mstone's extravagant use of threads, and to simulate a period of
-activity comprised of several POP sessions one can use the MULTIPOP
-protocol to multiplex active users onto a single thread.  The protocol
-has all the same parameters as POP, plus the following:
-
-<table border=1 cellpadding=2>
-<tr><th>Attribute</th><th>Description</th></tr>
-
-<tr><td><code>userSpacing</code></td>
-
-    <td>Total time for each user's session.</td>
-</tr>
-<tr><td><code>usersPerModem</code></td>
-
-    <td>The maximum number of concurrently connected users is limited
-	to <code>users / usersPerModem</code></td>
-</tr>
-</table>
-
-<p>
-
-The protocol functions are substantially different.  Instead of
-simulating a single login-check-logout sequence, a protocol block
-simulates an entire active period for a set of users.  Each user
-checks mail once in the initialization function, once each time the
-loop body is executed, and once more in the protocol conclusion
-function.  
-<p>
-
-<li><h4>"Event-queue" implementation</h4>
-
-<p>
-Unless the "noevents" parameter in the "&lt;config&gt;" section is set to 1,
-or mailclient is not given the "-e" flag, mstone will run in
-"event-queue" mode.  Instead of creating one thread per client, it
-will multiplex clients over a much smaller number of threads.  This is
-intended to increase the tool's scalability.
-
-<p>
-Note that I/O is still synchronous with this model, so the number of
-threads required will approximately equal the maximum number of
-concurrent operations.  Also note that this change does not reduce the
-number of required file descriptors.
-
-<p>
-
-<li><h4>Other Minor Additions</h4>
-
-<ul>
-
-<li>IMAP now has a ramp-down time, enabled by defining
-<code>IMAP_RAMPDOWN</code>.  IMAP threads now exit uniformly between
-the time the test is supposed to be over and the time Mstone starts
-killing them.
-
-<li>Mstone used to always time out connections after 60 seconds.  The
-timeout value can now be configured on a per-block basis via the
-<code>timeout</code> parameter. The value of the timeout parameter must
-be defined in milliseconds, so the following value would mean a timeout
-of one (1) hour:<BR>
-
-&nbsp;&nbsp;&nbsp;timeout 3600000
-
-<li>Simplified client allocation.  It is now possible to specify the
-number of clients in each group by specifying a value for
-<code>clients</code> in each <code>&lt;CLIENT&gt;</code> section and
-<em>not</em> specifying a global <code>clientCount</code> in the
-<code>&lt;CONFIG&gt;</code> section.
-
-</ul>
-
-<li><h4>Bug Fixes</h4>
-
-<ul>
-
-<li>SMTP now ignores debugging output appearing over the connection.
-Before, Mstone would generate an error when talking to
-e.g. <code>sendmail -d64.5</code>.
-
-<li>(now it works...)  The old sequence of IMAP commands used by
-Mstone was incorrect.  Instead of only downloading unread messages, it
-would download all messages received since the start of the session
-each time a new messages was received.  Depending on what you were
-doing, this could have a serious effect on your results.
-
-</ul>
-
-<li><h4>Wish List</h4>
-
-<ul>
-  <li>Scriptable user behavior for POP and IMAP protocols.  While we should
-      probably not go overboard, adding more configuration options to Mstone
-      is probably not the answer.  There is already some support for more
-      complex behaviors in the IMAP code -- we may or may not want to make
-      use of it.  More to the point, wider coverage of the IMAP
-      protocol is vital to QA's use of the tool.
-</ul>
-
-</ol>
-</body></html>

mozilla/mstone/ToDo

@@ -1,189 +0,0 @@
-Mstone TODO List
-
-Updated:
-	3-20-2000	Dan Christian
-
-======================================================================
-Minor improvements
-
-Data reduction at each testbed client
-
-Test message generator (plain and MIME styles)
-
-More graphs for multiple runs
-
-Option to drop a fraction of connections
-
-IMAP delete without reading
-	Just get the message list and delete everything.  This could
-be the fastest way to drain out the store.
-
-
-Display MIN/MAX or standard deviation on graphs
-	Gnuplot can do data points with error bars.  You could either
-use MIN/MAX or the standard deviation for the error bars.  There are
-issues with calculating the standard deviation numbers throughout the
-graph that need to be addressed.
-
-
-Statistics reset
-	At least the MIN and MAX statistics could be easily reset
-during the test (after ramp up).  This keeps the transients during
-startup and shutdown from dominating these numbers.  The standard
-deviation statistics are much trickier to reset during the run.  It
-may be better to isolate sections in post processing.
-
-
-Perl web server
-	Sometimes it would be nice to include our own web server to
-provide the results (instead of using file: URLs).  This would also be
-a gateway to form based test configuration editing and allow results
-to be interactively updated during tests.  Perl with a socket library
-could handle this without too much trouble.
-
-
-Dynamic test loading
-	Finalize an API for dynamically loading tests.  This would
-allow tests to be added or updated separately from the core
-functionality.  This may be needed for some types of security testing.
-
-
-Link graphs to the results tables
-	There are already tags by each graph.  You should be able to
-link the appropriate results table entry to each graph.  This sort of
-tricky since graphs often combine multiple entries.
-
-
-Show statistics for every block
-	Statistics are actually kept for every block in every thread.
-There should be a way to view information at this detail.
-
-
-Man pages
-	The online docs are nice, but good 'ol man pages would be
-great in a different way.
-
-
-Reduce namespace polution
-	Scripts names like setup and cleanup are too general.  They
-
-should be part of the main 'mstone' script (e.g. mstone setup).
-
-Examples of script series
-	Include example scripts to run entire series of tests in a
-sane way.
-
-
-Fix FORMAT clash
-	At the start of a test, each client process outputs the
-information needed to report all its protocols.  When there are
-multiple processes on one client, these FORMAT lines can intermix and
-cause parsing errors.
-
-
-Set connection drop rate
-	Drop some percentage of the connections without a proper
-shutdown.  This tests how well a server can detect and recover from
-hard disconnects.
-
-
-Improve randomness
-	The way that we generate random numbers in a range may be not
-generate the proper randomness.  We are using lrand48()%range we
-should use (lrand48/RAND_RANGE)*range.  There are some end conditions
-that need to be thought about.  All of this is in the sequence code;
-one change should fix (or break :) everything.
-
-	Also, we may be generating numbers that are never used.  This
-may be costly, and can create holes in the proper sequence.
-
-
-Improve printing
-	The color graphs are great on screen, but tend to print
-poorly.  Either we need a better way to generate a printable version
-(maybe through a CGI button), or the seperate protocols need to be
-printed individually.  Also, Communicator does a lousy job of keeping
-title with tables or graphs.  Hopefully, Mozilla will do better.
-
-
-======================================================================
-Whole new protocol tests:
-
-ICQ
-	Test high volume instant messaging.  Very useful for the
-bridges and gateways that people are considering using.
-
-
-WAP
-	WAP is the emerging standard for mobile phones.
-
-
-WCAP
-	Web based calendar services
-
-
-LDAP
-	Use the LDAP SDK to do basic LDAP testing.  The SDK probably
-isn't fast enough to call this a real performance test, but you can at
-least test performance degredation due to load from a real application
-(like a mail server).
-
-
-DNS
-	Mail servers use DNS a lot.  You should at least be able to
-see if performance is degrading due to load.
-
-
-Disk/filesystem
-	Test read, write, sync, link, un-link, and append performance under
-multiple threads.
-
-
-Cert servers
-	Test certificate authenticity checking performance
-
-
-======================================================================
-Possible dummy servers:
-
-SMTP
-	Receive mail via SMTP and ignore it.  Usefull for SMTP relay
-testing.
-
-
-DNS
-	Simulate slow DNS server lookups.  Usefull for SMTP relay testing.
-
-
-======================================================================
-Major changes
-
-Throttling
-	Monitor and control transaction rates so that specific load
-levels can be easily specified.  The rates should be able to vary to
-simulate peek hour usage and disconnect-restore.
-
-
-NSPR threading
-	Use NSPR for threading and sockets.  This may allow other OSes
-to be used as clients.  This might be easy, since mstone does not need
-any locking, just simple thread creation and harvesting.  NSPR
-argument parsing and hashes may also be useful.
-
-
-SSL
-	Support SSL on the protocols that allow it.  May require NSPR.
-
-
-Line speed emulation
-	Simulate the variable delays and limited throughput of dial up
-connections.
-
-
-Scripting
-	Allow more detailed control of protocol tests.  It looks
-difficult to make this scalable and fast.
-
-
-Combined tests
-	Deliver mail over SMTP and then see when it arrives using IMAP.

mozilla/mstone/allbuild

@@ -1,462 +0,0 @@
-#!/bin/ksh
-########################################################################
-# buildall - automated multi-platform build tool
-#
-# 10/09/97 - marcel - created
-# 10/13/97 - marcel - support shared build tree
-#  2/11/98 - marcel - updated for 4.0 Beta builds (need -update)
-#  2/26/98 - marcel - added -r, -t and host specifiers
-#  7/01/99 - robodan - added VAR=value ability
-#  8/01/99 - robodan - explicitly know about building on localhost
-#  10/15/99 - robodan - remove older OSes from build list
-#  2000/4/7 - robodan - Created mstone version
-########################################################################
-#
-# This script is intended to do a set of UNIX builds for a
-# given CVS module.  It is designed to use 'rsh' between a
-# set of trusting hosts and use shared NFS storage with common
-# mount points (e.g. /u/username/...)
-#
-# To check if you have rights to rsh to a particular host, try:
-#   rsh hostname "echo $PATH"
-# You may have to edit your .rhosts or /etc/hosts.equiv
-#
-# A target directory will be created based on the current date.
-#
-# A set of global build logs plus a log per platform are kept
-# in a log directory under the target
-#
-# It will checkout a copy of the source, duplicate it for
-# each platform and perform a set of remote builds in parallel.
-# The script will exit when all the work has been completed.
-#
-# Example usage:
-#  cd ~/src; buildall msg
-# Result:
-#  ~/src/19980210_40.1/
-#  ~/src/19980210_40.1/logs/...
-#  ~/src/19980210_40.1/src/...
-#  ...
-#
-
-# Buildhosts
-DEFAULT_BUILDHOSTS="kimo nugget vsync shave purgatory trex0"
-
-usage() {
-  echo ""
-  echo "usage: buildall [ make assigns... ] < -t | target > [ -r ] [ buildhosts... ]"
-  echo "   [ -t | --test]:	just test rsh and report OS versions."
-  echo "  [-r | --respin]:	rebuild in place using existing source."
-  echo "  [-p | --postbuild]:	Execute post build command too."
-  echo "  [make assigns]:	e.g. VARIANT=release"
-  echo "         <target>:	one of: mstone42"
-  echo "  [buildhosts...]:	default [$DEFAULT_BUILDHOSTS]"
-  echo ""
-  exit 1
-}
-
-########################################################################
-# Set these defaults and options for your desired build
-########################################################################
-
-# Target base destination directory
-DESTBASE=`pwd`
-
-# Can we do multiple ARCH builds in same source tree
-SHARESRC=yes
-
-DESCRIPTION=""
-BUILDHOSTS=""
-RESPIN="no"
-POSTBUILD="no"
-JUST_TEST="no"
-DESTTYPE=""
-CO_CMD="cvs -d $CVSROOT -q checkout"
-CHECKOUT=""
-CHECKOUT2=""
-#MOZCVSROOT=':pserver:anonymous@cvs.mozilla.org:/cvsroot'
-MOZCVSROOT=':pserver:robodan%netscape.com@cvs.mozilla.org:/cvsroot'
-
-MAKE="gmake"
-MK_ARG=""
-
-ARGS="$@"
-
-for ARG in "$@"; do
-
-# If this is a make assignment (FOO=whatever), add it to make command
-# Arguments with quotes in them dont go all the way through.
-# Make args trick: 'FOO=nop -j 2'
-# The pre-post arg stuff uses hostnames as a switch, ugly calling syntax.
-if [[ -n "`echo z$ARG | egrep '^z[A-Z0-9_]+=[^ 	]'`" ]] ; then
-  if [[ -n "$DESCRIPTION" ]] ; then
-	echo "Arg after target is ignored! ($ARG)"
-	continue
-  fi
-  if [[ -z "$BUILDHOSTS" ]] ; then	# pre  args
-    MAKE="$MAKE $ARG"
-  else					# post args
-    MK_ARG="$MK_ARG $ARG"
-  fi
-  continue
-fi
-
-# should we just rebuild todays latest source...
-if [[ "$ARG" = "-r" || "$ARG" = "--respin" || "$ARG" = "respin" ]]; then
-  RESPIN="yes"
-  continue
-fi
-
-# should we just run post build command...
-if [[ "$ARG" = "-p" || "$ARG" = "--postbuild" || "$ARG" = "postbuild" ]]; then
-  POSTBUILD="yes"
-  continue
-fi
-
-# should we just test remote connectivity and execute permissions...
-if [[ "$ARG" = "-t" || "$ARG" = "--test" ]]; then
-  JUST_TEST="yes"
-  RESPIN="yes"
-  continue
-fi
-
-# We will pull source using: "$CHECKOUT"
-# And build on each machine: "cd $BUILDDIR && $BUILDCMD"
-
-
-# expand targets (but dont confuse hosts for targets (msg7))
-
-# These will build just mstone
-# expand targets (but dont confuse hosts for targets (msg7))
-if [[ "$BUILDCMD" = "" && "$ARG" = mailstone* ]]; then
-  case ${ARG#mstone} in
-	"")
-	"42")
-		DESTTYPE=_MSTONE42
-		MS_BRANCH=""
-		#BUILDCMD="$MAKE $MK_ARG debug release"
-		#POSTCMD="$MAKE $MK_ARG all_DBG.OBJ all_OPT.OBJ"
-		BUILDCMD="$MAKE $MK_ARG rpackage"
-		POSTCMD="$MAKE $MK_ARG all_OPT"
-		;;
-	*)
-		echo "Unknown mstone version in $ARG"
-		echo "Try mstone42"
-		exit 1;;
-  esac
-
-  DESCRIPTION="Mstone $MS_BRANCH"
-  BUILDDIR=./mozilla/mstone
-  CVSROOT=$MOZCVSROOT
-  CHECKOUT="$CO_CMD $MS_BRANCH mozilla/mstone"
-  # BUG No way to unpack perl, gd, and gnuplot before building
-  continue
-fi
-
-#########################
-# Other...
-#########################
-
-# These will print some tools info
-if [[ "$ARG" = "tools" ]]; then
-  CHECKOUT="$CO_CMD modules"
-  BUILDDIR=.
-  BUILDCMD="which gcc && ls -l /tools/ns/bin/gcc && which gcc-2.7.2.1 && ls -l /tools/ns/bin/gcc-2.7.2.1"
-  continue
-fi
-
-#########################
-# Everything else is assumed to be a hostname
-#########################
-
-BUILDHOSTS="$ARG $BUILDHOSTS"
-
-done # for ARG in $*; do
-
-if [[ "$BUILDHOSTS" = "" ]]; then
-  BUILDHOSTS=$DEFAULT_BUILDHOSTS
-fi
-
-if [[ "$BUILDCMD" = "" && "$JUST_TEST" = "no" ]]; then
-  usage
-fi
-
-########################################################################
-# You shouldn't have to modify stuff below here too much
-########################################################################
-
-# Who and Where are we
-PROG=buildall
-RSH=rsh
-SYS=`uname -s`
-echo SYS=$SYS
-if [[ "$SYS" = "HP-UX" ]]; then
-  RSH=remsh
-fi
-
-########################################################################
-# Simple log output function
-########################################################################
-
-log() {
-#  echo "[`date +\"%Y/%m/%d %H:%M:%S\"`] $PROG: $*"
-  echo "`date +\"%H:%M:%S\"` $PROG: $*"
-}
-
-########################################################################
-# Error
-########################################################################
-
-quit() {
-  log "$* (exiting)..."
-  exit 1
-}
-
-# Where should the work be done
-REV=1
-WORKDIR=$DESTBASE/`date +"%Y%m%d"`$DESTTYPE.$REV
-LASTWORKDIR=$WORKDIR
-LASTREV=$REV
-
-while [[ -d $WORKDIR ]]; do
-  LASTREV=$REV
-  let "REV= REV + 1"
-  LASTWORKDIR=$WORKDIR
-  WORKDIR=$DESTBASE/`date +"%Y%m%d"`$DESTTYPE.$REV
-done
-
-if [[ "$RESPIN" = "yes" ]]; then
-  WORKDIR=$LASTWORKDIR
-  REV=$LASTREV
-fi
-BUILDREV=$REV
-
-if [[ ! -d $WORKDIR && "$RESPIN" = "yes" ]]; then
-  quit "missing expected respin workdir ($WORKDIR)"
-fi
-
-mkdir -p $WORKDIR
-
-# Where to send logs
-LOGDIR=$WORKDIR/logs
-[[ -d $LOGDIR ]] || mkdir $LOGDIR
-
-# What tool to use for compressed tar
-if [[ -x /tools/ns/bin/tar ]] ; then	# ROBDAN 9-15-98 for Linux
-  TAR=/tools/ns/bin/tar
-else
-  TAR=tar
-fi
-
-SRCDIR=$WORKDIR/src
-SRCTAR=$WORKDIR/src.tar.gz
-
-########################################################################
-# The function which extracts the source and prepares for copies
-########################################################################
-
-prepare_source() {
-  log "Preparing source code..."
-  mkdir $SRCDIR
-  (cd $SRCDIR;
-   log "Extracting source in $SRCDIR...";
-   log "$CHECKOUT > $LOGDIR/cvs-co.txt";
-   $CHECKOUT > $LOGDIR/cvs-co.txt;
-   RET=$?
-   if [[ $RET -ne 0 ]]; then quit "### Failed($RET): $CHECKOUT"; fi
-   if [[ "$CHECKOUT2" != "" ]]; then
-      log "$CHECKOUT2 >> $LOGDIR/cvs-co.txt";
-      $CHECKOUT2 >> $LOGDIR/cvs-co.txt;
-      RET=$?
-      if [[ $RET -ne 0 ]]; then quit "### Failed($RET): $CHECKOUT2"; fi
-   fi
-   log "Listing source...";
-   ls -Rl > $LOGDIR/src-ls-Rl.txt
-   log "Archiving source..."
-   $TAR czf $SRCTAR .
-  )
-  RET=$?
-  if [[ $RET -ne 0 ]]; then
-    quit "### Failed($RET): cannot prepare source";
-  else
-    log "Source extraction complete";
-  fi
-}
-
-########################################################################
-# The function which does a build
-########################################################################
-
-do_rbuild() {
-  OSDEST=$1
-
-  if [ "$SHARESRC" = "yes" ]; then
-    RSRCDIR=$SRCDIR
-  else
-    RSRCDIR=$WORKDIR/$OSDEST
-  fi
-
-  [[ -d $RSRCDIR ]] || mkdir -p $RSRCDIR
-
-  cd $RSRCDIR;
-
-  # do any late variable expansions
-  RAWCMD=$BUILDCMD
-  BUILDCMD=$(eval echo $RAWCMD)
-  
-  if [[ $RHOST = localhost ]] ; then
-    log "Build locally for $OSDEST ($BUILDCMD)...";
-    cd $BUILDDIR && pwd && $BUILDCMD && echo $PROG: Success
-    RET=$?
-    if [[ $RET -ne 0 ]]; then quit "### Failed($RET): $OSDEST build"; fi
-
-    log "Completed local build..."
-    return
-  fi
-
-  if [[ "$SHARESRC" != "yes" ]]; then
-     log "Extracting source for $OSDEST...";
-     $RSH $RHOST -n "cd $RSRCDIR && pwd && $TAR xzf $SRCTAR";
-     RET=$?
-     if [[ $RET -ne 0 ]]; then quit "### Failed($RET): $OSDEST source extraction"; fi
-  else
-     log "Using common source in $RSRCDIR";
-  fi
-  
-  log "Building for $OSDEST ($BUILDCMD)...";
-  $RSH $RHOST -n "cd $RSRCDIR/$BUILDDIR && pwd && $BUILDCMD && echo $PROG: Success"
-  RET=$?
-  if [[ $RET -ne 0 ]]; then quit "### Failed($RET): $OSDEST build"; fi
-
-  log "Completed $OSDEST...";
-}
-
-buildhost() {
-  RHOST=$1
-
-  log "Query $RHOST configuration...";
-
-  if [[ $RHOST = localhost ]] ; then
-     uname -s > /tmp/$$.$RHOST 2>&1
-  else
-    $RSH $RHOST -n "uname -s" > /tmp/$$.$RHOST 2>&1
-    RET=$?
-    if [[ $RET -ne 0 ]]; then
-      quit "..[$RHOST] ### Failed($RET): $RSH $RHOST -n \"uname -s\"";
-    fi
-  fi
-  ROSTYPE=`tail -1 /tmp/$$.$RHOST`
-
-  if [[ "$ROSTYPE" = "AIX" ]]; then
-    $RSH $RHOST -n "uname -v" > /tmp/$$.$RHOST 2>&1
-    ROSTYPE=${ROSTYPE}`tail -1 /tmp/$$.$RHOST`
-  fi
-
-  if [[ $RHOST = localhost ]] ; then
-     uname -r > /tmp/$$.$RHOST 2>&1
-  else
-    $RSH $RHOST -n "uname -r" > /tmp/$$.$RHOST 2>&1
-  fi
-  ROSREV=`tail -1 /tmp/$$.$RHOST`
-  rm /tmp/$$.$RHOST
-
-  if [[ $RHOST = localhost ]] ; then
-    OSDEST=`hostname | cut -f1 -d.`-${ROSTYPE}${ROSREV}
-  else
-    OSDEST=${RHOST}-${ROSTYPE}${ROSREV}
-  fi
-  log "..Building on [$OSDEST]..."
-
-  REV=1				# find unique logfile name
-  OSLOG=$LOGDIR/$OSDEST.$REV
-  while [[ -f $OSLOG ]]; do
-    let "REV = REV + 1"
-    OSLOG=$LOGDIR/$OSDEST.$REV
-  done
-
-  if [[ "$JUST_TEST" = "yes" ]]; then
-    echo "$PROG: Success" > $OSLOG
-  else
-    ( do_rbuild $OSDEST ) > $OSLOG 2>&1
-  fi
-
-  grep "$PROG: Success" $OSLOG > /dev/null
-  RET=$?
-  if [[ $RET -eq 0 ]]; then
-    RESULT="SUCCESS";
-  else
-    RESULT="FAILURE($RET)";
-  fi
-  log "..Completed [$OSDEST] <$RESULT>.";
-}
-
-########################################################################
-# The function which initiates all the builds
-########################################################################
-
-do_builds() {
-  log "Launching builds..."
-
-  for HOST in $BUILDHOSTS; do
-    buildhost $HOST &
-  done
-}
-
-########################################################################
-# main
-########################################################################
-
-main() {
-  if [[ "$JUST_TEST" = "yes" ]]; then
-    log "Automated test starting..."
-  else
-    log "Automated build of [$DESCRIPTION] starting..."
-  fi
-  log ""
-  log "       ARGS = $ARGS"
-  log " BUILDHOSTS = $BUILDHOSTS"
-  log "    WORKDIR = $WORKDIR"
-  log "     SRCDIR = $SRCDIR"
-  log "     LOGDIR = $LOGDIR"
-  log "   CHECKOUT = $CHECKOUT"
-  log "   BUILDDIR = $BUILDDIR"
-  log "   BUILDCMD = $BUILDCMD"
-  log "     RESPIN = $RESPIN"
-  log ""
-
-  [[ "$RESPIN" = "no" ]] && prepare_source
-  do_builds
-  log "Waiting for all builds to complete..."
-  wait
-  log "All builds completed."
-
-  if [[ -n "$POSTCMD" && "$POSTBUILD" = "yes" ]] ; then
-	log "Running post build command."
-
-	REV=1				# find unique logfile name
-	POSTLOG=$LOGDIR/postbuild.$REV
-  	while [[ -f $POSTLOG ]]; do
- 	  let "REV = REV + 1"
- 	  POSTLOG=$LOGDIR/postbuild.$REV
-	done
-
-	echo "Dir $SRCDIR/$BUILDDIR" > $POSTLOG
-	echo "Cmd $POSTCMD" >> $POSTLOG
-	(cd $SRCDIR/$BUILDDIR && $POSTCMD && echo $PROG: Success) >> $POSTLOG 2>&1
-
-        log "Post build command completed."
-  elif [[ -n "$POSTCMD" ]] ; then
-	echo "Skipping post build command: $POSTCMD"
-  fi
-}
-
-REV=1
-PROGLOG=$LOGDIR/$PROG.$REV
-
-while [[ -f $PROGLOG ]]; do
-  REV=`expr $REV + 1`
-  PROGLOG=$LOGDIR/$PROG.$REV
-done
-
-main | tee $PROGLOG 2>&1
-exit 0

mozilla/mstone/autobuild.bat

@@ -1,164 +0,0 @@
-@if not "%echo%" == "on" echo off
-
-REM ************ simple autobuild for mailstone
-
-setlocal
-
-set BOTH=0
-
-if not "%1" == "" goto GetTag
-
-set BOTH=1
-set TAG=_OPT
-goto SetConfig
-
-:GetTag
-
-if %1 == dbg set TAG=_DBG
-if %1 == DBG set TAG=_DBG
-if %1 == Debug set TAG=_DBG
-if %1 == debug set TAG=_DBG
-if %1 == Release set TAG=_OPT
-if %1 == release set TAG=_OPT
-if %1 == opt set TAG=_OPT
-if %1 == OPT set TAG=_OPT
-if %1 == optimize set TAG=_OPT
-if %1 == Optimize set TAG=_OPT
-if %1 == optimized set TAG=_OPT
-if %1 == Optimized set TAG=_OPT
-if %1 == clean goto CleanBoth
-
-:SetConfig
-
-if %TAG% == _DBG set Config=Debug
-if %TAG% == _OPT set Config=Release
-
-set ARCH=WINNT4.0%TAG%.OBJ
-
-set FINAL_PATH=built\package\%ARCH%\mailstone
-
-if not "%2" == "clean" if not exist %FINAL_PATH%\nul mkdir %FINAL_PATH%
-
-
-REM ************ first, clean the binary release
-nmake /f mailstone.mak CFG="mailstone - Win32 %Config%" /nologo NO_EXTERNAL_DEPS=1 CLEAN
-
-if not "%2" == "clean" goto BuildMailstone
-
-if exist src\%Config%\nul echo y | rd /s src\%Config% > nul
-if exist src\gnuplot-3.7\%Config%\nul echo y | rd /s src\gnuplot-3.7\%Config% > nul
-if exist src\gd1.3\%Config%\nul echo y | rd /s src\gd1.3\%Config% > nul
-if exist built\%ARCH%\nul echo y | rd /s built\%ARCH% > nul
-if exist %FINAL_PATH%\nul echo y | rd /s %FINAL_PATH% > nul
-
-goto done
-
-:BuildMailstone
-
-REM **************** next, build it
-nmake /f mailstone.mak CFG="mailstone - Win32 %Config%" /nologo NO_EXTERNAL_DEPS=1
-if errorlevel 1 goto BadBuild
-
-REM ************ next, copy the top-level files
-copy mstone.bat %FINAL_PATH%
-copy setup.bat %FINAL_PATH%
-copy CHANGELOG %FINAL_PATH%
-copy INSTALL %FINAL_PATH%
-copy README %FINAL_PATH%
-copy LICENSE %FINAL_PATH%
-
-REM ************ now, copy the files for running mailstone into bin
-if not exist %FINAL_PATH%\bin\nul mkdir %FINAL_PATH%\bin
-copy built\%ARCH%\mailclient.exe %FINAL_PATH%\bin
-if exist built\package\%ARCH%\mailclient.exe copy built\package\%ARCH%\mailclient.exe %FINAL_PATH%\bin
-if exist built\package\%ARCH%\mailclient.exe del /f /q built\package\%ARCH%\mailclient.exe
-copy bin\*.pl %FINAL_PATH%\bin
-
-REM ************ now, copy the configuration files into conf
-if not exist %FINAL_PATH%\conf\nul mkdir %FINAL_PATH%\conf
-copy conf\*.* %FINAL_PATH%\conf
-
-REM ************ now, copy the data files into data
-if not exist %FINAL_PATH%\data\nul mkdir %FINAL_PATH%\data
-copy data\*.msg %FINAL_PATH%\data
-
-REM ************ now, copy the gd files into gd
-if not exist %FINAL_PATH%\gd\nul mkdir %FINAL_PATH%\gd
-copy src\gd1.3\index.html %FINAL_PATH%\gd\gd.html
-
-REM ************ now, copy the gnuplot files into gnuplot
-if not exist %FINAL_PATH%\gnuplot\nul mkdir %FINAL_PATH%\gnuplot
-copy built\%ARCH%\gnuplot\gnuplot.exe %FINAL_PATH%\gnuplot
-copy src\gnuplot-3.7\Copyright %FINAL_PATH%\gnuplot
-copy src\gnuplot-3.7\docs\gnuplot.1 %FINAL_PATH%\gnuplot
-
-REM ************ now, copy the perl files into perl
-if not exist %FINAL_PATH%\perl\nul mkdir %FINAL_PATH%\perl
-if not exist %FINAL_PATH%\perl\bin\nul mkdir %FINAL_PATH%\perl\bin
-if not exist %FINAL_PATH%\perl\lib\nul mkdir %FINAL_PATH%\perl\lib
-if not exist %FINAL_PATH%\perl\lib\5.00503\nul mkdir %FINAL_PATH%\perl\lib\5.00503
-if not exist %FINAL_PATH%\perl\lib\5.00503\MSWin32-x86\nul mkdir %FINAL_PATH%\perl\lib\5.00503\MSWin32-x86
-#copy built\%ARCH%\perl\perl.exe %FINAL_PATH%\perl\bin
-#rcp -b sandpit:/share/builds/components/perl5/WINNT-perl5/perl.exe %FINAL_PATH%\perl\bin\perl.exe
-#if errorlevel 1 goto BadRcp
-#if not exist %FINAL_PATH%\perl\perl.exe goto BadRcp
-#rcp -b sandpit:/share/builds/components/perl5/WINNT-perl5/perl300.dll %FINAL_PATH%\perl\bin\perl300.dll
-#if errorlevel 1 goto BadRcp
-#if not exist %FINAL_PATH%\perl\perl300.dll goto BadRcp
-
-copy src\perl5.005_03\Artistic %FINAL_PATH%\perl
-copy c:\perl\5.00503\bin\MSWin32-x86\perl.exe %FINAL_PATH%\perl\bin
-copy c:\perl\5.00503\bin\MSWin32-x86\perl.dll %FINAL_PATH%\perl\bin
-copy c:\perl\5.00503\lib\*.pm %FINAL_PATH%\perl\lib\5.00503
-copy c:\perl\5.00503\lib\*.pl %FINAL_PATH%\perl\lib\5.00503
-copy c:\perl\5.00503\lib\MSWin32-x86\*.pm %FINAL_PATH%\perl\lib\5.00503\MSWin32-x86
-
-
-goto end
-
-:CleanBoth
-
-echo.
-echo NOTICE: CLEANING debug build
-call autobuild.bat debug clean
-
-echo NOTICE: CLEANING optimized build
-call autobuild.bat release clean
-
-echo NOTICE: Removing generated dependency files
-del /s *.dep
-
-if exist built\nul echo y | rd /s built > nul
-
-goto done
-
-:BadRcp
-
-echo.
-echo ERROR: Failed to rcp perl files over to mailstone packaging
-echo ERROR: Two common causes of this are .rhosts permissions or a broken rcp.exe
-echo ERROR: Make sure you are not using rcp.exe from NT4.0 SP4
-echo ERROR: The SP5 version is available in \\cobra\engineering\bin\rcp_sp5.exe
-echo ERROR: Use this version to replace ...\system32\rcp.exe
-goto done
-
-:BadBuild
-
-echo.
-echo ERROR: Failed to build mailstone
-goto done
-
-:end
-
-echo.
-
-if %BOTH% == 0 goto done
-if %TAG% == _DBG goto done
-
-set TAG=_DBG
-goto SetConfig
-
-:done
-
-endlocal
-

mozilla/mstone/bin/args.pl

@@ -1,64 +0,0 @@
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# This file does argument processing, file IO, and other utility routines
-
-# Where the online docs live
-#$mailstoneURL =
-#    "http://home.netscape.com/eng/server/messaging/4.1/mailston/stone.htm";
-#$mailstoneURL =
-#    "http://lxr.mozilla.org/mozilla/source/mstone/doc/MailStone.html";
-#$mailstoneURL =
-#    "http://docs.iplanet.com/docs/manuals/messaging/nms415/mailstone/stone.htm"
-$mailstoneURL = "doc/MailStone.html";
-
-# Subdirs for results (each under a timestamp dir).  Should just hardwire.
-$tmpbase = "tmp";
-$resultbase = "results";
-
-# This holds everything about the test and system configuration
-@workload = ();
-# Setup the special CONFIG section
-$params{"sectionTitle"} = "CONFIG";
-$params{"sectionParams"} = "";
-$params{"lineList"} = ();
-push @workload, \%params;
-
-# Get the lists discribing the data we process
-do 'protoconf.pl' || die "$@\n";
-
-%includedFiles = ();		# array of included files
-
-do 'util.pl' || die "$@\n";
-
-return 1;

mozilla/mstone/bin/genplot.pl

@@ -1,310 +0,0 @@
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-#			Sean O'Rourke <sean@sendmail.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# This file deals with the graphs data only
-# Interfaces to gnuplot to generate gifs for HTML inclusion.
-
-do 'util.pl';
-sub warn_system;
-sub die_system;
-
-# Type of images to hold plots (e.g. png, gif, jpeg, svg, tiff, pbm, etc)
-unless ($params{IMAGETYPE}) {
-    # Should probe gnuplot and see if it can generate one of:
-    #	png, gif, jpeg, svg, tiff, or pbm.
-    # Not all the programs that use args.pl need this (or have gnuplot, yet)
-    my $outfile = "$tmpbase/termtypes.out";
-    my %types = ();		# hash of interesting types that we spot
-
-    unless (open(NEW, "<$outfile")) { # re-use old file if present
-	($params{DEBUG}) &&
-	    print "Asking gnuplot what output types it supports\n";
-
-	# SEAN: this appears to do what they want:
-	warn_system "echo 'set term' | $params{GNUPLOT} > $outfile";
-
-	open(NEW, "<$outfile") ||
-	    warn ": Could not open gnuplot output for parsing ($outfile): $!";
-    }
-
-    # now check through the output for terminal types we can use.
-    # I havent verified the jpeg or tiff types.  e-mail me success or failure
-    while (<NEW>) {
-	(/\spng\s/) && ++$types{"png"} && next;
-	(/\sgif\s/) && ++$types{"gif"} && next;
-	(/\sjpeg\s/) && ++$types{"jpeg"} && next;
-	(/\ssvg\s/) && ++$types{"svg"} && next;
-	(/\stiff\s/) && ++$types{"tiff"} && next;
-	(/\spbm\s/) && ++$types{"pbm"} && next;
-    }
-    close (NEW);
-
-    ($params{DEBUG}) &&
-	print "Found these gnuplot types: " . (join " ", (keys %types)) . "\n";
-
-    # The ordering here determines our preferences
-    # This list is by likely browser compatibility and image compactness
-    # png is about 10x smaller than gif
-    # svg is smooth and scalable but usually requires a plug-in
-    # jpeg will probably look bad, but will be directly supported
-    if ($types{"png"}) { $params{IMAGETYPE}="png"; }
-    elsif ($types{"gif"}) { $params{IMAGETYPE}="gif"; }
-    elsif ($types{"jpeg"}) { $params{IMAGETYPE}="jpeg"; }
-    elsif ($types{"svg"}) { $params{IMAGETYPE}="svg"; }
-    elsif ($types{"tiff"}) { $params{IMAGETYPE}="tiff"; }
-    elsif ($types{"pbm"}) { $params{IMAGETYPE}="pbm"; }
-    else {
-	warn "Gnuplot doesn't support any good image types.  Check $outfile.\n";
-	$params{IMAGETYPE} = undef;
-    }
-    # leave the output file around to speed up repeat runs
-}
-
-# sub function to write data files, fire off gnuscript, and clean up
-# Uses global startTime and endTime figured above
-# genPlot counterName title label \@protocols \@variables
-sub genPlot {
-    my $name = shift;
-    my $title = shift;
-    my $label = shift;
-    my $protos = shift || die "genPlot: '$name' missing protocols";
-    my $f = shift;
-    my $vars = shift || die "genPlot: '$name' missing vars";
-
-    my $runlist = "";
-    my $totPoints = 0;
-    my $totProtos = 0;
-    my @realProtos;
-    my @goodProtos;
-
-    # user fewer data points than pixels to look good.
-    #   on 640x480 gif, the graph is about 579x408
-    my $maxData = int (($params{CHARTWIDTH}-60) * 0.9);
-    my $averageCnt = int (($endTime - $startTime + ($maxData - 1))/$maxData);
-    if ($averageCnt < 1) { $averageCnt = 1; } # must be a positive int
-
-    ($params{DEBUG}) && print "$name: averageCnt=$averageCnt vars = @$vars \n";
-
-    foreach $p (@$protos) { # First see if there is anything to graph
-	($p =~ /^Total$/o) && next; # derived if needed
-	my $pPoints = 0;
-	my $gp = $graphs{$p};
-	ALLVAR: foreach $vm (@$vars) {
-	    my $vp =  ($f) ? $gp->{$vm}->{$f} : $gp->{$vm};
-
-	    unless (($vp) && (scalar %$vp)) {
-		#print "genplot Checking: $p $vm $f => NO\n";
-		next;
-	    }
-	    #print "genplot Checking: $p $vm $f => ";
-	    foreach $time (keys %$vp) {
-		next unless ($vp->{$time} != 0);
-		$totPoints++;
-		$pPoints++;
-		#print "VALUES\n";
-		last ALLVAR;
-	    }
-	    #print "nothing\n"
-	}
-	if ($pPoints > 0) {	# count how many protocols have non 0
-	    $totProtos++;
-	    push @goodProtos, $p;
-	}
-    }
-    ($params{DEBUG}) && print "\tprotocols: @goodProtos\n";
-
-    if ($totPoints == 0) {	# nothing in any protocol
-	print "No data for graph '$name', variables '@$vars'\n";
-	return 0;
-    }
-
-    foreach $p (@$protos) {
-	unlink ("$tmpdir/$name.$p"); # remove any previous runs
-
-	(($p =~ /^Total$/o) && ($totProtos <= 1))
-	    && next;		# skip Totally if only 1 protocol plus total
-
-	($p !~ /^Total$/o) && push @realProtos, $p; # everything but Total
-
-#  	if ($p =~ /^Total$/o) {	# move from last to first
-#  	    $runlist = "\'$name.$p\' with lines, " . $runlist;
-#  	    next;
-#  	}
-
-	$runlist .= ", " if ($runlist); # later ones
-
-	$runlist .= "\'$name.$p\' with lines";
-    }
-
-    $totPoints = 0;
-    foreach $p (@realProtos) {	# create the plot data files
-	open(DATA, ">$tmpdir/$name.$p") || 
-	    die "Can't open $tmpdir/$name.$p:$!";
-	my $gp = $graphs{$p};
-	my $n = 0;
-	my $s = 0.0;
-	my $sTime = 0.0;
-	my $vp = ($f) ? $gp->{$vars->[0]}->{$f} : $gp->{$vars->[0]};
-
-#	foreach $time (sort numeric keys %$vp) {
-	for (my $tm = $startTime; $tm <= $endTime; $tm++) {
-	    my $v = 0.0;
-	    foreach $vm (@$vars) {
-		$vp = ($f) ? $gp->{$vm}->{$f} : $gp->{$vm};
-
-		$totPoints++;
-
-		# due to optimization in updateDelta, 
-		#    0 entries are undefined (also avoids warning)
-		$v += ($vp->{$tm}) ? $vp->{$tm} : 0;
-
-		# if ($vp->{$tm} < 0) {
-		# print $name, ": proto=", $p, " var=", $vm,
-		# " value=", $vp->{$tm}, "\n";
-		# }
-	    }
-	    $s += $v;
-	    $n += 1;
-	    if ($n == 1) {	# NOTE: shifts left in sliding window
-		$sTime = $tm-$startTime;
-	    }
-	    if ($n >= $averageCnt) {
-		printf (DATA "%d %f\n", $sTime * $timeStep, $s/$n);
-		$n = 0;
-		$s = 0.0;
-	    }
-	}
-	if ($n > 0) {		# handle end case
-	    printf (DATA "%d %f\n", $sTime * $timeStep, $s/$n);
-	}
-	close(DATA);
-    }
-    #($params{DEBUG}) && print "\tpoints: $totPoints\n";
-
-    # need to handle "Total" case
-    # read the other files and write out the sum
-    # FIX: total my be mis-aligned with data
-    if (($#$protos > $#realProtos) && ($totProtos > 1)) { 
-	unlink ("$tmpdir/$name.Total");
-	open(DATA, ">$tmpdir/$name.Total") || 
-	    die "Can't open $tmpdir/$name.Total:$!";
-
-	foreach $r (@goodProtos) { # get file handles
-	    open($r, "$tmpdir/$name.$r")
-		|| die "Couldn't open $tmpdir/$name.$r: $!";
-	}
-				# ASSUMES files are identical in order
-	my $first = shift @goodProtos;
-	# print "First protocol: $first  Rest: @realProtos\n";
-	while (<$first>) {
-	    my ($t, $s) = split ' ', $_;
-	    foreach $r (@goodProtos) { # get file handles
-		$l = <$r>;
-		if ($l) {
-		    my ($tt, $v) = split ' ', $l;
-		    $t = $tt unless ($t); # in case first proto missing time
-		    $s += $v;
-		}
-	    }
-	    printf (DATA "%d %f\n", $t, $s);
-	}
-
-	foreach $r (@goodProtos) { close($r); }
-	close (DATA);
-    }
-
-    # SEAN: don't even try if we aren't generating images:
-    return 0 unless $params{IMAGETYPE};
-
-    # Create a script to feed to gnuplot, which creates a .gif graph.
-    $runTime = ($endTime - $startTime + 1) * $timeStep;
-    unlink("$tmpdir/$name.gpt");
-    open(SCRIPT, ">$tmpdir/$name.gpt")
-	|| die "Can't open $tmpdir/$name.gpt:$!";
-    
-    $gnuplot = $params{GNUPLOT};
-    return 1 unless $gnuplot;
-    if ($gnuplot !~ /^\//) {	# if not absolute, adjust for cd $tmpbase
-	$gnuplot = "../../$gnuplot"; # ASSUME $tmpbase is single dir
-    }
-    #print "gnuplot is $gnuplot $params{GNUPLOT}\n";
-
-    my $varstring = "";		# create display version of names
-    foreach $t (@$vars) {
-	$varstring .= ", " if ($varstring);
-	$varstring .= ($timerNames{$t}) ? $timerNames{$t} : $t;
-    }
-
-    # Setup output "terminal type"
-    if ($params{IMAGETYPE} eq "gif") { # gif type has different arguments
-	print SCRIPT "set terminal $params{IMAGETYPE} small size $params{CHARTWIDTH},$params{CHARTHEIGHT}\n";
-    } elsif ($params{IMAGETYPE} eq "svg") { # svg type has different args too
-	print SCRIPT "set terminal $params{IMAGETYPE} size $params{CHARTWIDTH} $params{CHARTHEIGHT}\n";
-    } else {			# most types work like this
-	print SCRIPT "set terminal $params{IMAGETYPE} small color\n";
-	if (($params{CHARTWIDTH} != 640) || ($params{CHARTHEIGHT} != 480)) {
-	    my $xscale = $params{CHARTWIDTH} / 640;
-	    my $yscale = $params{CHARTHEIGHT} / 480;
-	    print SCRIPT "set size $xscale,$yscale\n";
-	}
-    }
-    print SCRIPT<<"!GROK!THIS!";
-set output "../../$resultdir/$name.$params{IMAGETYPE}" # ASSUME $tmpbase is single dir
-set autoscale
-set xlabel "Test time (seconds)"
-set ylabel "$label"
-set title "$title ($varstring) -- $params{TSTAMP}"
-plot [0:$runTime] $runlist
-!GROK!THIS!
-    close(SCRIPT);
-
-    # run script from tmpbase to clean up line labeling
-#    my $olddir=getcwd();
-    chdir $tmpdir;
-    warn_system (split (/\s/, $gnuplot), "$name.gpt");
-    chdir "../..";
-#    chdir $olddir;
-
-    unless ($params{DEBUG}) {
-	# cleanup the plot data (or leave around for debugging)
-	foreach $p (@$protos) {
-	    unlink("$tmpdir/$name.$p");
-	}
-	unlink("$tmpdir/$name.gpt");
-    }
-    return 1;
-}
-
-
-return 1;

mozilla/mstone/bin/mailmaster.pl

@@ -1,629 +0,0 @@
-#!/usr/bin/env perl
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-#			Mike Blakely
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-#  see setup.pl for full usage
-#	mailmaster [-d] [-c <config file>] ...
-
-# This script reads in the client configuration files and will
-# fork children to rsh the mailclient process on network clients,
-# each child will write test results to /mailstone directory before
-# dying.  The parent will the read and combine the results.
-#
-# Make sure the user running this script has rsh privilege across
-# all client machines
-
-print "Netscape Mailstone version 4.2\n";
-print "Copyright (c) Netscape Communications Corp. 1997-2000\n";
-
-# this parses the command line and config file
-do 'args.pl'|| die "$@\n";
-sub die_system;
-sub warn_system;
-
-parseArgs();			# parse command line
-
-{				# get unique date string
-    my ($sec, $min, $hour, $mday, $mon, $year) = localtime;
-    my $tstamp = sprintf ("%04d%02d%02d.%02d%02d",
-		       1900+$year, 1+$mon, $mday, $hour, $min);
-
-    if ( -d "$resultbase/$tstamp") { # check for runs within a minute
-	my $tail = 'a';
-	while ( -d "$resultbase/$tstamp$tail" ) { $tail++; }
-	$tstamp .= $tail;
-    }
-    $params{TSTAMP} = $tstamp;
-}
-
-$resultdir = "$resultbase/$params{TSTAMP}";
-$tmpdir = "$tmpbase/$params{TSTAMP}";
-$resultstxt = "$resultdir/results.txt";
-$resultshtml = "$resultdir/results.html";
-mkdir ("$resultbase", 0775);
-mkdir ("$tmpbase", 0775);
-mkdir ("$resultdir", 0775);
-mkdir ("$tmpdir", 0775);
-
-# Make sure we have everything
-die "Must specify the test time" unless $params{TIME};
-die "Must specify a workload file" unless $params{WORKLOAD};
-
-if ($params{TESTBED}) {		# BACK COMPATIBILITY
-    readTestbedFile ($params{TESTBED}) || die "Error reading testbed: $@\n";
-}
-
-$testsecs = figureTimeSeconds ($params{TIME}, "seconds");
-
-# figure out the processes and thread, given the desired number
-# takes into account all the constraints.  todo can be a float.
-sub figurePT {
-    my $sec = shift;
-    my $todo = shift;
-    my $p = 1;			# first guess
-    my $t = 1;
-    my $start = 1;		# initial process guess
-    my $end = 250;		# highest process guess
-
-    if ($todo < 1) {		# mark this client as inactive
-	$sec->{PROCESSES} = 0;
-	$sec->{THREADS} = 0;
-	return 0;
-    }
-
-    if (($section->{MAXCLIENTS}) && ($todo > $section->{MAXCLIENTS})) {
-	$todo = $section->{MAXCLIENTS};	# trim to max client per host
-    }
-    if ($section->{PROCESSES}) { # they set this part already
-	$start = int ($section->{PROCESSES});
-	$end = $start;
-	$p = $start;
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	print "Using specified $p processes for clients $slist\n";
-    }
-
-    $end = int ($section->{MAXPROCESSES})
-	if ($section->{MAXPROCESSES}); # they set a max
-    
-    if (($params{NT}) || ($section->{ARCH} eq "NT4.0")) {
-	$end = 1;		#  # NT is currently limited to 1 process
-	$start = 1;
-	$p = 1;
-    }
-
-    # step through some process counts
-    # it should first reduce errors due to MAXTHREADS,
-    # the it will reduce errors due to integer math.
-    # not optimal, just good enough
-    my $misses = 0;
-    for (my $n = $start; $n <= $end; $n++) { # try some process counts
-	my $tryt = int ($todo / $n);
-	if (($sec->{MAXTHREADS}) && ($tryt > $sec->{MAXTHREADS})) {
-	    $tryt = $sec->{MAXTHREADS};
-	}
-	# see if this is a better match than the last one
-	if (abs ($todo - ($n * $tryt)) < abs ($todo - ($p * $t))) {
-	    $p = $n;
-	    $t = $tryt;
-	    $misses = 0;
-	} else {
-	    $misses++;
-	    last if ($misses > 1); # getting worse
-	}
-    }
-    $sec->{PROCESSES} = $p;
-    $sec->{THREADS} = $t;
-    return $p * $t;
-}
-
-# Allocate CLIENTCOUNT to the client machines
-# try NOT to turn this into a massive linear programming project
-# works best to put bigger machines last
-if ($params{CLIENTCOUNT}) {
-    my $todo = $params{CLIENTCOUNT};
-    my $softcli = 0;		# how many can we play with
-
-    foreach $section (@workload) { # see which are already fixed
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	unless (($section->{PROCESSES}) && ($section->{THREADS})) {
-	    $softcli++;
-	    next;
-	}
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my @hlist = split /[\s,]/, $slist;
-	my $hcnt = (1 + $#hlist);
-
-	# subtract fixed entries
-	my $tcount = ($section->{THREADS}) ? $section->{THREADS} : 1;
-	$todo -= $tcount * $section->{PROCESSES} * $hcnt;
-	$clientProcCount += $section->{PROCESSES} * $hcnt; # total processes
-	$params{DEBUG} &&
-	    print "Fixed load group with $hcnt hosts: $section->{PROCESSES} x $tcount\n";
-    }
-
-    $params{DEBUG} &&
-	    print "Allocating $todo clients over $softcli groups\n";
-    if ($softcli) {
-	foreach $section (@workload) {
-	    next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	    next if (($section->{PROCESSES}) && ($section->{THREADS}));
-	    my $slist = $section->{sectionParams};
-	    $slist =~ s/HOSTS=\s*//; # strip off initial bit
-	    my @hlist = split /[\s,]/, $slist;
-	    my $hcnt = (1 + $#hlist);
-
-	    #print "todo=$todo softcli=$softcli hcnt=$hcnt\n";
-	    $todo -= $hcnt * figurePT ($section, $todo / ($softcli * $hcnt));
-	    $clientProcCount += $hcnt * $section->{PROCESSES}; # total procs
-
-	    $softcli--;
-	    last if ($softcli <= 0); # should not happen
-	}
-    }
-    if ($todo) {
-	print "Warning: Could not allocate $todo of $params{CLIENTCOUNT} clients.\n";
-	$params{CLIENTCOUNT} -= $todo;
-    }
-	    
-   
-} else {			# figure out the client count
-    my $cnt = 0;
-    foreach $section (@workload) { # see which are already fixed
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-#  	next unless ($section->{PROCESSES});
-	next unless $section->{CLIENTS};
-
-	my $clients = $section->{CLIENTS};
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my @hlist = split /[\s,]/, $slist;
-	my $hcnt = scalar @hlist;
-	
-	$clients /= $hcnt;
-	my $maxp = ($section->{MAXPROCESSES} || 10000);
-	my $maxt = ($section->{MAXTHREADS} || 10000);
-	if ($maxp * $maxt < $clients) {
-	    die <<EOS;
-Too many clients for hosts $section->{sectionParams}:
-clients 	= $section->{CLIENTS}
-maxThreads 	= $section->{MAXTHREADS}
-maxProcesses 	= $section->{MAXPROCESSES}
-EOS
-	}
-	my ($nt, $np);
-	if ($maxt >= $clients) {
-	    $nt = $clients;
-	    $np = 1;
-	} else {
-	    $np = int (($clients / $maxt) + (($clients % $maxt) ? 1 : 0));
-	    $nt = int ($clients / $np);
-	}
-
-	$section->{THREADS} = $nt;
-	$section->{PROCESSES} = $np;
-#  	$section->{CLIENTS} = $np * $nt * $hcnt;
-	$cnt += $nt * $np * $hcnt;
-	$clientProcCount += $np * $hcnt; # total processes
-    }
-    $params{CLIENTCOUNT} = $cnt;
-    die "No clients configured!\n" unless ($cnt > 0);
-}
-
-# This has to be written into save workload file for later processing
-unless ($params{FREQUENCY}) {	# unless frequency set on command line
-    my $chartp = ($params{CHARTPOINTS}) ? $params{CHARTPOINTS} : 464;
-
-    # approximate data points for good graphs (up to 2 times this)
-    $params{FREQUENCY} = int ($testsecs / $chartp);
-    if ($params{FREQUENCY} < 2) { # fastest is every 2 seconds
-	$params{FREQUENCY} = 2;
-    } elsif ($params{FREQUENCY} > 60) {	# slowest is every minute
-	$params{FREQUENCY} = 60;
-    }
-}
-
-{ # set a unique block id on every section
-    my $id = 0;
-    my $configSeen = 0;
-    my $defaultSeen = 0;
-    foreach $section (@workload) {
-	if ($section->{"sectionTitle"} =~ /^CONFIG$/) {
-	    next if $configSeen;
-	    $configSeen++;
-	}
-	if ($section->{"sectionTitle"} =~ /^DEFAULT$/) {
-	    next if $defaultSeen;
-	    $defaultSeen++;
-	}
-	$id++;			# number 1, 2, ...
-	if ($section->{"sectionTitle"} =~ /^(CONFIG|CLIENT)$/) {
-	    $section->{BLOCKID} = $id;
-	} else {
-	    push @{$section->{"lineList"}}, "blockID\t$id\n";
-	}
-    }
-}
-
-# Write the version we pass to mailclient
-writeWorkloadFile ("$resultdir/work.wld", \@workload,
-		   \@scriptWorkloadSections);
-
-# Write the complete inclusive version
-writeWorkloadFile ("$resultdir/all.wld", \@workload);
-
-# SEAN: copy the wld.in file to the result directory for later
-# statistics gathering.
-my $wld = $params{WORKLOAD};
-if (-f "$wld.in") {
-    die_system "cp $wld.in $resultdir/wld.in";
-} else {
-    unless ($wld !~ /\.preload_(new|old|touch)$/) {
-	warn "Can't find wld.in file for `$wld'\n" unless -f "$wld.in";
-    }
-}
-
-setConfigDefaults();		# pick up any missing defaults
-
-unless ($#protocolsAll > 0) {
-    die "No protocols found.  Test Failed!\n";
-}
-
-print "Starting: ", scalar(localtime), "\n";
-
-# redirect STDERR
-open SAVEERR, ">&STDERR";
-open(STDERR, ">$resultdir/stderr") || warn "Can't redirect STDERR:$!\n";
-
-$totalProcs = 0;		# number of clients started
-
-# iterate over every client in the testbed, complete the cmd and rsh
-if ($params{NT}) {		# single client on local host 
-    pathprint ("Starting clients (errors logged to $resultdir/stderr)\n");
-
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	my $tcount = ($section->{THREADS}) ? $section->{THREADS} : 1;
-
-
-	# Build the initial Mailclient command line
-	my $preCmd = ($section->{COMMAND})
-	    ? $section->{COMMAND} : $params{CLIENTCOMMAND};
-	$preCmd .= " -s -t $params{TIME} -f $params{FREQUENCY}";
-	$preCmd .= " -d" if ($params{DEBUG});
-	$preCmd .= " -r" if ($params{TELEMETRY});
-	$preCmd .= " -R $params{RAMPTIME}" if ($params{RAMPTIME});
-	$preCmd .= " -m $params{MAXERRORS}" if ($params{MAXERRORS});
-	$preCmd .= " -M $params{MAXBLOCKS}" if ($params{MAXBLOCKS});
-	$preCmd .= " -n 1 -N $tcount";
-	$preCmd .= ($params{USEGROUPS} && $section->{GROUP})
-	    ? " -H $section->{GROUP}" : " -H $cli";
-
-	my $stdout = "$tmpdir/localhost.out";
-
-	$totalProcs += $tcount;
-	do 'makeindex.pl' || warn "$@\n";	# html index
-
-	printf "\nTest duration: %d %s.  Rampup time: %d %s.  Number of clients: %d\n",
-	figureTimeNumber ($params{TIME}),
-	figureTimeUnits ($params{TIME}, "seconds"),
-	figureTimeNumber ($params{RAMPTIME}),
-	figureTimeUnits ($params{RAMPTIME}, "seconds"),
-	$totalProcs;
-
-	print STDERR  "localhost: cd $params{TEMPDIR}; $preCmd\n";
-
-	# Redirect STDIN, and STDOUT
-	#open SAVEIN, "<STDIN";
-	open STDIN, "<$resultdir/work.wld"
-	    || die "Coundn't open $resultdir/work.wld for input\n";
-	open SAVEOUT, ">&STDOUT";
-	open STDOUT, ">$stdout"
-	    || die "Couldnt open $stdout for output\n";
-
-	chdir $params{TEMPDIR} || die "Could not cd $params{TEMPDIR}: $!\n";
-	warn_system $preCmd;
-	close STDOUT;
-	open STDOUT, ">&SAVEOUT";
-	printf "Test done.\n";
-
-	chdir $cwd || die "Could not cd $cwd: $!\n";
-	last;			# only do the first one
-    }
-} else {			# not NT (forking works)
-
-    foreach $section (@workload) {	# do pre run commands
-	next unless ($section->{sectionTitle} =~ /PRETEST/i);
-	unless ($section->{COMMAND}) {
-	    print "PreTest with no Command for $section->{sectionParams}\n";
-	    next;
-	}
-
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my $myCmd = $section->{COMMAND};
-	$myCmd =~ s/%f/$params{FREQUENCY}/; # fill in frequency variable
-	if ($myCmd =~ m/%c/o) { # dont force down if count is used
-	    $count = $testsecs / $params{FREQUENCY};
-	    $myCmd =~ s/%c/$count/; # fill in count variable
-	}
-	my $rsh = ($section->{RSH}) ? $section->{RSH} : $params{RSH};
-
-	foreach $cli (split /[\s,]/, $slist) {
-	    print "Running pre test command on $cli\n";
-	    open PRE, ">>$resultdir/$cli-pre.log";
-	    print PRE "========\n";
-	    print PRE "$myCmd\n";
-	    print PRE "========\n";
-	    close PRE;
-	    print STDERR "$cli: $myCmd\n"; # log the actual command
-	    forkproc ($rsh, $cli, $myCmd,
-		      "/dev/null", "$resultdir/$cli-pre.log");
-	}
-	foreach $cli (split /[\s,]/, $slist) {
-	    wait();		# run multiple PRETEST section sequentially
-	}
-    }
-
-    foreach $section (@workload) { # start monitors
-	next unless ($section->{sectionTitle} =~ /MONITOR/i);
-
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my $myCmd = ($section->{COMMAND})
-	    ? $section->{COMMAND} : $params{MONITORCOMMAND};
-	my $forceDown = 0;
-	$myCmd =~ s/,/ /g;	# turn commas into spaces BACK COMPATIBIILITY
-	$myCmd =~ s/%f/$params{FREQUENCY}/; # fill in frequency variable
-
-	if ($myCmd =~ m/%c/o) { # dont force down if count is used
-	    $count = $testsecs / $params{FREQUENCY};
-	    $myCmd =~ s/%c/$count/; # fill in count variable
-	} else {
-	    $forceDown = 1;
-	}
-	my $rsh = ($section->{RSH}) ? $section->{RSH} : $params{RSH};
-
-	foreach $cli (split /[\s,]/, $slist) {
-	    printf "Monitoring on $cli\n";
-	    open PRE, ">>$resultdir/$cli-run.log";
-	    print PRE "========\n";
-	    print PRE "$myCmd\n";
-	    print PRE "========\n";
-	    close PRE;
-	    print STDERR "$cli: $myCmd\n"; # log the actual command
-	    $pid = forkproc ($rsh, $cli, $myCmd,
-			     "/dev/null", "$resultdir/$cli-run.log");
-	    push @forceDownPids, $pid if ($forceDown); # save PID for shutdown
-	}
-    }
-
-    print "Starting clients (errors logged to $resultdir/stderr)\n";
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	next unless ($section->{PROCESSES}); # unused client
-
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my $rsh = ($section->{RSH}) ? $section->{RSH} : $params{RSH};
-	my $pcount = $section->{PROCESSES};
-	my $tcount = ($section->{THREADS}) ? $section->{THREADS} : 0;
-	my $tempdir;
-	if ($section->{TEMPDIR}) {
-	    $tempdir = $section->{TEMPDIR};
-	} elsif ($params{TEMPDIR}) {
-	    $tempdir = $params{TEMPDIR};
-	}
-	my $preCmd = "./" . (($section->{COMMAND})
-			     ? $section->{COMMAND} : $params{CLIENTCOMMAND});
-	$preCmd .= " -e" unless ($params{NOEVENTS});
-	$preCmd .= " -s -t $params{TIME} -f $params{FREQUENCY}";
-	$preCmd .= " -d" if ($params{DEBUG});
-	$preCmd .= " -r" if ($params{TELEMETRY});
-	$preCmd .= " -R $params{RAMPTIME}" if ($params{RAMPTIME});
-	if ($params{MAXERRORS}) {
-	    # distribute error count over processes, rounding up
-	    my $n = int (($params{MAXERRORS} + $clientProcCount - 1)
-			 / $clientProcCount);
-	    $n = 1 if ($n < 1);
-	    $preCmd .= " -m $n";
-	}
-	if ($params{MAXBLOCKS}) {
-	    # distribute block count over processes, rounding up
-	    my $n = int (($params{MAXBLOCKS} + $clientProcCount - 1)
-			 / $clientProcCount);
-	    $n = 1 if ($n < 1);
-	    $preCmd .= " -M $n";
-	}
-	$preCmd = "cd $tempdir; " . $preCmd if ($tempdir);
-	$preCmd =~ s!/!\\!g if ($section->{ARCH} eq "NT4.0");
-	$preCmd =~ s/;/&&/g if ($section->{ARCH} eq "NT4.0");
-
-        my $total_clients = $section->{CLIENTS};
-	my $residue = $total_clients - ($tcount * $pcount);
-	foreach $cli (split /[\s,]/, $slist) {
-	    my $stdout = getClientFilename ($cli, $section);
-	    my $myCmd = $preCmd;
- 	    $myCmd .= ($params{USEGROUPS} && $section->{GROUP})
-		? " -H $section->{GROUP}" : " -H $cli";
-	    my $foo = ($params{USEGROUPS} && $section->{GROUP})
-		? $section->{GROUP} : undef;
-
-	    if ($tcount) {
-		my $nt = $tcount;
-		if ($residue > 0) {
-		    ++$nt;
-		    $residue -= $pcount;
-		}
-		$myCmd .= " -n $pcount -N $nt";
-		printf "Starting $pcount x $nt on $cli%s\n", 
-		    $foo?" (group = $foo)":'';
-		$totalProcs += $pcount * $nt;
-	    } else {
-		my $np = $pcount;
-		if ($residue > 0) {
-		    ++$np;
-		    --$residue;
-		}
-		$myCmd .= " -n $np";
-		printf "Starting $np processes on $foo\n";
-		$totalProcs += $np;
-	    }
-
-	    print STDERR "$cli: $myCmd\n"; # log the actual command
-	    $pid = forkproc ($rsh, $cli, $myCmd,
-			     "$resultdir/work.wld", $stdout);
-	    push @localPids, $pid if ($cli =~ /^localhost$/i);
-	}
-    }
-
-    if (@localPids) {
-	# print "Trapping extraneous local signals\n";
-	# This doesnt trap quite right.  We dont die, but shell returns...
-	$SIG{ALRM} = 'IGNORE';	# in case we get an ALRM from the mailclient
-    }
-
-    printf "\nTest duration: %d %s.  Rampup time: %d %s.  Number of clients: %d\n",
-    figureTimeNumber ($params{TIME}),
-    figureTimeUnits ($params{TIME}, "seconds"),
-    figureTimeNumber ($params{RAMPTIME}),
-    figureTimeUnits ($params{RAMPTIME}, "seconds"),
-    $totalProcs;
-
-    do 'makeindex.pl' || warn "$@\n";	# html index
-
-    print "Waiting for test to finish.\n";
-    print "Waiting: ", scalar(localtime), "\n";
-    # wait for children to finish
-    $pid = wait();
-    if (@forceDownPids) {		# shut down after the first return.
-	print "Shutting down @forceDownPids\n";
-	kill 1 => @forceDownPids;	# sigHUP
-	# kill 9 => @forceDownPids;	# sigTERM
-    }
-    while ($pid != -1) {	# wait for all children
-	$pid = wait();
-    }
-
-    foreach $section (@workload) {	# do post test commands
-	next unless ($section->{sectionTitle} =~ /POSTTEST/i);
-	unless ($section->{COMMAND}) {
-	    print "PostTest with no command for $section->{sectionParams}\n";
-	    next;
-	}
-
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my $myCmd = $section->{COMMAND};
-	$myCmd =~ s/%f/$params{FREQUENCY}/; # fill in frequency variable
-	if ($myCmd =~ m/%c/o) { # dont force down if count is used
-	    $count = $testsecs / $params{FREQUENCY};
-	    $myCmd =~ s/%c/$count/; # fill in count variable
-	}
-	my $rsh = ($section->{RSH}) ? $section->{RSH} : $params{RSH};
-
-	foreach $cli (split /[\s,]/, $slist) {
-	    printf "Running post test command on $cli\n";
-	    open PRE, ">>$resultdir/$cli-post.log";
-	    print PRE "========\n";
-	    print PRE "$myCmd\n";
-	    print PRE "========\n";
-	    close PRE;
-	    print STDERR "$cli: $myCmd\n"; # log the actual command
-	    forkproc ($rsh, $cli, $myCmd,
-		      "/dev/null", "$resultdir/$cli-post.log");
-	}
-	foreach $cli (split /[\s,]/, $slist) {
-	    wait();		# run multiple POSTTEST section sequentially
-	}
-    }
-
-}
-
-print STDERR "\nDone.\n";
-close(STDERR);
-open STDERR, ">&SAVEERR";
-
-print "\nClients done: ", scalar(localtime), "\n";
-print "Collecting results\n";
-
-do 'reduce.pl' || die "$@\n";	# generate graphs and sums
-
-print "Generating results pages\n";
-
-do 'report.pl' || die "$@\n";
-
-# Now display that data to console
-if ($params{VERBOSE}) {
-    fileShow ($resultstxt);
-    print "\n";
-}
-print "Processing done: ", scalar (localtime), "\n";
-
-pathprint ("\nResults (text):\t$resultstxt\n");
-pathprint (  "Results (HTML):\t$resultshtml\n");
-print        "Index of runs: \tfile://$cwd/$resultbase/index.html\n";
-
-
-# Now check for major problems in the stderr file
-if (open(RESULTSTXT, "$resultdir/stderr")) {
-    $ERRCNT=0;
-    while (<RESULTSTXT>) { $ERRCNT++; }
-    close(RESULTSTXT);
-    pathprint ("Error log ($ERRCNT lines):\t$resultdir/stderr\n");
-}
-
-{				# list user requested logging
-    my @logfiles = <$resultdir/*-pre.log>;
-    if (@logfiles) {
-	foreach $f (@logfiles) {
-	    print "Pre test log:   \t$f\n";
-	}
-    }
-    @logfiles = <$resultdir/*-run.log>;
-    if (@logfiles) {
-	foreach $f (@logfiles) {
-	    print "Monitoring log: \t$f\n";
-	}
-    }
-    @logfiles = <$resultdir/*-post.log>;
-    if (@logfiles) {
-	foreach $f (@logfiles) {
-	    print "Post test log:  \t$f\n";
-	}
-    }
-}
-
-print "Mailmaster done: ", scalar(localtime), "\n"; exit 0;

mozilla/mstone/bin/makeindex.pl

@@ -1,115 +0,0 @@
-#!/usr/bin/env perl
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# usage: perl -Ibin makeindex.pl
-# Look at all the results files and create a top level index
-
-unless ($resultbase) {		# pick up systematic defaults, if needed
-    do 'args.pl'|| die $@;
-    parseArgs();		# parse command line
-}
-
-($testname = $params{WORKLOAD}) =~ s:conf/::;
-$testname =~ s:.wld::;
-
-my $entry = "";
-
-$entry .= "<TR><TD><BR><A HREF=\"$params{TSTAMP}/results.html\">$params{TSTAMP}</A></TD>";
-$entry .= "<TD>$testname</TD>\n";
-$entry .= "<TD>$params{TITLE}</TD>\n";
-$entry .= "<TD>$params{TIME}</TD>\n";
-$entry .= "<TD>$params{CLIENTCOUNT}</TD>\n";
-$entry .= "<TD><A HREF=\"$params{TSTAMP}/all.wld\">workload</A></TD>\n";
-$entry .= "<TD><A HREF=\"$params{TSTAMP}/stderr\">stderr</A></TD></TR>\n";
-
-if (-r "$resultbase/index.html") {
-    fileInsertAfter ("$resultbase/index.html",
-		     "^<!-- INSERT TAGS HERE",
-		     $entry);
-} else {			# create index from scratch
-    system ("cd $resultbase; ln -s ../doc .");
-    open(INDEXNEW, ">$resultbase/index.new") || 
-	die "Couldn't open $resultbase/index.new: $!";
-
-    print INDEXNEW <<END;
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
-<HTML>
-<TITLE>
-MailStone Results
-</TITLE>
-<HEAD>
-</HEAD>
-<BODY TEXT="#000000" BGCOLOR="#FFFFFF" LINK="#0000FF" VLINK="#FF0000" ALINK="#000088">
-<A HREF=$mailstoneURL>Mailstone documentation</A><BR>
-<TABLE BORDER=2>
-<CAPTION> Mozilla MailStone Results Index </CAPTION>
-<TR>
-<TH>Run</TH> <TH>Testname</TH> <TH> Title </TH>
-    <TH>Duration</TH> <TH>Clients</TH> <TH>Details</TH> <TH>Error log</TH> 
-</TR>
-<!-- INSERT TAGS HERE - DO NOT DELETE THIS LINE -->
-END
-
-    print INDEXNEW $entry;	# put in this entry
-
-    # Add in any existing entries
-    # get a list of all the results files
-    @resall = <$resultbase/*/results.html>;
-    # Write out all the links
-    # This could be rather slow, but we only do it when index.html is missing
-    foreach $filefull (reverse @resall) {
-	my $file = $filefull;
-	$file =~ s:$resultbase/::;
-	if ($file eq $params{TSTAMP}) { next; } # written above
-	my $dir = $file;
-	$dir =~ s:/results.html::;
-	# dont read in old workloads, it will override the current one
-	print INDEXNEW "<TR><TD><BR><A HREF=\"$file\">$dir</A></TD>\n";
-	print INDEXNEW "<TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD>\n";
-	print INDEXNEW "<TD><A HREF=\"$dir/all.wld\">workload</A></TD>\n";
-	print INDEXNEW "<TD><A HREF=\"$dir/stderr\">stderr</A></TD></TR>\n";
-    }
-
-    print INDEXNEW <<END;
-</TABLE>
-</BODY>
-</HTML>
-END
-    close (INDEXNEW);
-    fileBackup ("$resultbase/index.html");
-    rename ("$resultbase/index.new", "$resultbase/index.html");
-    print "Created $resultbase/index.html\n";
-}
-
-return 1;

mozilla/mstone/bin/makeusers.pl

@@ -1,414 +0,0 @@
-#!/usr/bin/perl
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# script to create test user accounts for Netscape Messaging Server 3, 4
-#
-# Given a set of parameters, this script will create an LDIF file
-# for a number of email users of the form:
-#	test1, test2, test3, ...	
-#
-# usage: perl create_accounts_ldif [users] [broadcast] [postmaster] [ options ]
-#   [ -a allUsersAlias ]
-#   [ -b basedn ]
-#   [ -d maildomain ]
-#   [ -f firstaccount ]
-#   [ -k ]
-#   [ -m mailhost ]
-#   [ -n numaccounts ]
-#   [ -o outputfile ]
-#   [ -p password ]
-#   [ -s storebase ]
-#   [ -u username ]
-#   [ -v ]
-#   [ -w workload ]
-#   [ -x maxstores ]
-#   [ -3 ]
-#
-#perl -Ibin -- bin/makeusers.pl -d mailhost.example.com -m mailhost.example.com -b 'o=example.com' -u mailhost-test -n 100 -4 -o mailhost100.ldif
-
-# Create the ldif for the user accounts and/or broadcast, postmaster account.
-#
-# The ldif then must be added to 
-# the directory by hand (ldapadd, or through the dir admin server's
-# Database Mgmt->Add entries from an ldif file).  
-
-# A faster way
-# is to export the existing directory, append the results of
-# this script, and re-import the combined file.  This can be
-# done using the following Netscape Directory Server commands:
-#   stop-slapd
-#   db2ldif outputfile
-#   [ merge files ]
-#   ldif2db inputfile  # for DS4 you would typically use -noconfig
-#   start-sladp
-#
-
-print "Netscape Mailstone.\nCopyright (c) 1998,1999 Netscape Communications Corp.\n";
-
-# server to be used in the internet mail address of the users
-$domain = "newdomain.example.net";
-
-# machine that will act as the user's mailhost
-$mailhost = "mailhost.example.net";
-
-# base dn for the user entries, e.g. o=Ace Industry,c=US 
-$basedn = "o=Benchmark Lab, c=US";
-
-# name of broadcast account
-$bcastacct = "allusers";
-
-# name of broadcast account
-$postmasteraddr = "root\@localhost";
-
-# base name to build user names, will construct test0, test1, ...
-$username = "test%ld";
-
-# user passwds, in SHA format, the passwd below is 'netscape'
-#$userpassword =  "{SHA}aluWfd0LYY9ImsJb3h4afrI4AXk=";
-# these can also be imported as cleartext
-$userpassword = "netscape";
-
-# 0: no numbered passwords, 1: number with userID
-$maxpass = 0;
-
-# first account to use
-$firstaccount = 0;
-
-# number of user accounts to create ($first - $first+$num-1)
-$numaccounts = 1_000;
-
-# For larger systems, spreading the users over multiple partitions
-# is usually a good idea.  This example assumes you have
-# created partitions named p0, p1, etc.
-
-# store partition base name
-$storebase = "p%ld";
-
-# max store number (0 - maxstores-1), skip if 0
-$maxstores = 0;
-
-#default to msg 4 schemas
-$usemsg4schema = 1;
-
-#default to writing to stdout
-$outfile = STDOUT;
-
-# Initial UID for genpasswd
-$firstuid = 1000;
-
-sub usage {
-    print "Usage: perl -Ibin -- makeusers [users] [broadcast] [postmaster]\n";
-    print "\t[ -w workload ] [ -o outputFile ]\n";
-    print "\t[ -d mailDomain ] [ -m mailHost ] [ -b baseDN ]\n";
-    print "\t[ -u username ] [ -f firstAccount ] [ -n numAccounts ]\n";
-    print "\t[ -p password ] [ -k ]\n";
-    print "\t[ -s storeBase ] [ -x numStores ]\n";
-    print "\t[ -a allUsersAlias ] [ -t postmasterAddress ]\n";
-    print "\t[ -3 ]|[ -4 ]\n";
-}
-
-sub readWorkConfig {		# read the workload in, parse our params
-    my $workloadfile = shift || die "Workload file name expected\n";
-
-    do 'args.pl'|| die $@;
-    readWorkloadFile ($workloadfile, \@workload)
-	|| die "Error reading workload: $@\n";
-				# assign all the parameters from the config
-    $mailhost = $defaultSection->{SERVER}
-	if ($defaultSection->{SERVER});
-    if ($defaultSection->{ADDRESSFORMAT}) {
-	my $addr = $defaultSection->{ADDRESSFORMAT};
-	$addr =~ s/^.*@//;
-	$domain = $addr;
-    }
-    if ($defaultSection->{LOGINFORMAT}) {
-	my $user = $defaultSection->{LOGINFORMAT};
-	#$user =~ s/%ld$//;
-	$username = $user;
-    }
-    $numaccounts = $defaultSection->{NUMLOGINS}
-        if ($defaultSection->{NUMLOGINS});
-    $firstaccount = $defaultSection->{FIRSTLOGINS}
-        if ($defaultSection->{FIRSTLOGINS});
-
-    $userpassword = $defaultSection->{PASSWDFORMAT}
-    if ($defaultSection->{SERVER});
-
-    if ($userpassword =~ m/%ld/) { # see if numbered passwords
-	$maxpass++;
-	#$userpassword =~ s/%ld//g;
-    }
-
-    # what isnt set: basedn, storebase, maxstores, usemsg4schema
-}
-
-while (@ARGV) {
-    $arg = shift(@ARGV);
-
-    if ($arg =~ /^-a$/i) {	# allusers (broadcast) user name
-	$bcastacct = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-b$/i) {	# LDAP base DN
-	$basedn = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-d$/i) {	# mail domain
-	$domain = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-f$/i) {	# initial account
-	$firstaccount = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-k$/i) {	# use numbered passwords
-	$maxpass++;
-	next;
-    }
-    if ($arg =~ /^-h$/i) {	# help
-	usage();
-	exit 0;
-    }
-    if ($arg =~ /^-m$/i) {	# mail server name
-	$mailhost = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-n$/i) {	# number of accounts
-	$numaccounts = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-o$/i) {	# name output file
-	my $fname = shift || die "File name expected\n";
-	open OUTFILE, ">$fname" || die "Error opening file $@\n";
-	$outfile = OUTFILE;
-	next;			# use msg4 user admin schema
-    }
-    if ($arg =~ /^-p$/i) {	# password
-	$userpassword = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-s$/i) {	# base name for above
-	$storebase = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-t$/i) {	# postmaster address
-	$postmasteraddress = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-u$/i) {	# user name base
-	$username = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-v$/i) {	# be verbose
-	$verbose++;
-	next;
-    }
-    # do this when read, so that later switches can override
-    if ($arg =~ /^-w$/i) {	# get a workload file
-	readWorkConfig (shift(@ARGV));
-	next;
-    }
-    if ($arg =~ /^-x$/i) {	# number of partitions (0 to skip)
-	$maxstores = shift(@ARGV);
-	next;
-    }
-    if ($arg =~ /^-3$/) {	# no msg4 schema
-	$usemsg4schema = 0;
-	next;
-    }
-    if ($arg =~ /^-4$/) {	# use msg4 user admin schema
-	$usemsg4schema = 1;
-	next;
-    }
-    if ($arg =~ /^users$/i) {
-	$genusers++;
-	next;
-    }
-    if ($arg =~ /^broadcast$/i) {
-	$genbroadcast++;
-	next;
-    }
-    if ($arg =~ /^passwd$/i) {
-	$genpasswd++;
-	next;
-    }
-    if ($arg =~ /^postmaster$/i) {
-	$genpostmaster++;
-	next;
-    }
-
-    print STDERR "Unknown argument $arg.  Use -h for help.\n";
-    exit 1;
-}
-
-unless (($genusers) || ($genbroadcast) || ($genpasswd) || ($genpostmaster)) {
-    print STDERR "Must specify mode [users] [broadcast] [postmaster] ...\n";
-    usage();
-    exit 0;
-}
-
-# specify number fields, if needed
-unless ($username =~ /%ld/) {
-    $username .= '%ld';
-}
-if (($maxpass) && !($userpassword =~ /%ld/)) {
-    $userpassword .= '%ld';
-}
-if (($maxstores) && !($storename =~ /%ld/)) {
-    $storename .= '%ld';
-}
-
-if ($verbose) {
-    print STDERR "Here is the configuration:\n";
-    print STDERR "baseDN='$basedn' \t";
-    print STDERR (($usemsg4schema) ? "-4\n" : "-3\n");
-    print STDERR "mailHost='$mailhost' \tdomain='$domain'\n";
-    print STDERR "userName='$username' \tnumAccounts=$numaccounts \tfirstAccount=$firstaccount\n";
-    print STDERR "userPassword='$userpassword'\n";
-    print STDERR "allUsersAccount='$bcastacct'\n" if ($genbroadcast);
-    print STDERR "postmasterAddress='$postmasterAddress'\n" if ($genpostmaster);
-}
-
-
-if ($genusers) {		# Create the user accounts
-    $storenum=0;
-    for ($i = $firstaccount; $i < $firstaccount+$numaccounts; $i++) {
-	# build user account name
-	my $acctname = $username;
-	$acctname =~ s/%ld/$i/;	# insert user number
-	my $password = $userpassword;
-	$password =~ s/%ld/$i/;	# insert user number
-
-
-
-	# MAKE SURE THERE ARE NO TRAILING SPACES IN THE LDIF
-	my $extradata = "";
-
-	if ($maxstores > 0) {	# assign them to a store
-	    my $storename = $storebase;
-	    $storename =~ s/%ld/$storenum/;
-	    $extradata .= "mailmessagestore: $storename\n";
-	    $storenum++;
-	    $storenum=0 if ($storenum >= $maxstores);
-	}
-
-	$extradata .= "objectclass: nsMessagingServerUser\n"
-	    if ($usemsg4schema);
-
-print $outfile <<END;
-dn: uid=$acctname, $basedn
-userpassword: $password
-givenname: $acctname
-sn: $acctname
-cn: $acctname
-uid: $acctname
-mail: $acctname\@$domain
-mailhost: $mailhost
-maildeliveryoption: mailbox
-objectclass: top
-objectclass: person
-objectclass: organizationalPerson
-objectclass: inetOrgPerson
-objectclass: mailRecipient
-$extradata
-END
-    }
-}
-
-if ($genbroadcast) {		# Create the broadcast account
-    # MAKE SURE THERE ARE NO TRAILING SPACES IN THE LDIF
-    my $password = $userpassword;
-    $password =~ s/%ld//;	# strip user number
-    # initial part
-    print $outfile <<END;
-dn: uid=$bcastacct, $basedn
-userpassword: $password
-givenname: $bcastacct
-sn: $bcastacct
-cn: $bcastacct
-uid: $bcastacct
-mail: $bcastacct\@$domain
-mailhost: $mailhost
-maildeliveryoption: forward
-END
-
-    # now put in each address
-    for ($i = $firstaccount; $i < $firstaccount+$numaccounts; $i++) {
-	# build user account name
-	my $acctname = $username;
-	$acctname =~ s/%ld/$i/;	# insert user number
-
-	print $outfile "mailforwardingaddress: $acctname\@$domain\n";
-    }
-
-    # final part
-    print $outfile <<END;
-objectclass: top
-objectclass: person
-objectclass: organizationalPerson
-objectclass: inetOrgPerson
-objectclass: mailRecipient
-
-END
-}
-
-if ($genpostmaster) {		# Create the postmaster account
-    # MAKE SURE THERE ARE NO TRAILING SPACES IN THE LDIF
-    print $outfile <<END;
-dn: cn=postmaster, $basedn
-cn: postmaster
-mail: postmaster\@$domain
-mailalternateaddress: postmaster\@$mailhost
-mgrprfc822mailmember: $postmasterAddress
-objectclass: top
-objectclass: mailGroup
-objectclass: groupOfUniqueNames
-
-END
-}
-
-# mixing passwd output with the ldif output above would be quite silly
-if ($genpasswd) {		# Create passwd entries for makeusers
-    for ($i = $firstaccount; $i < $firstaccount+$numaccounts; $i++) {
-	# build user account name
-	my $acctname = $username;
-	$acctname =~ s/%ld/$i/;	# insert user number
-	my $password = $userpassword;
-	$password =~ s/%ld/$i/;	# insert user number
-	my $uid = $firstuid + $i;
-	print $outfile "$acctname:$password:$uid:$uid:Mail user $acctname:/home/$acctname:/bin/sh\n";
-    }
-}
-
-exit 0;

mozilla/mstone/bin/nsarch

@@ -1,147 +0,0 @@
-#!/bin/sh
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1999-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# Figure out standard system names
-
-UNAME_REPORTS=`uname`
-UNAME_OS_ARCH=`uname -s`
-UNAME_OS_RELEASE=`uname -r`
-
-OS_ARCH=$UNAME_OS_ARCH
-OS_RELEASE=$UNAME_OS_RELEASE
-OS_CONFIG=${OS_ARCH}${OS_RELEASE}
-
-if [ "$UNAME_OS_ARCH" = "SunOS" ]; then
-  PROCESSOR=`uname -p`
-  if [ "$PROCESSOR" = "i386" ]; then
-    BUILD_ARCH=x86
-  else
-    BUILD_ARCH=SPARC
-  fi
-  BUILD_OS=SOLARIS
-  if [ "$UNAME_OS_RELEASE" = "5.5" ]; then
-    BUILD_VER=2.5
-  elif [ "$UNAME_OS_RELEASE" = "5.5.1" ]; then
-    BUILD_VER=2.5
-  elif [ "$UNAME_OS_RELEASE" = "5.6" ]; then
-    BUILD_VER=2.6
-  elif [ "$UNAME_OS_RELEASE" = "5.7" ]; then
-    BUILD_VER=7
-  elif [ "$UNAME_OS_RELEASE" = "5.8" ]; then
-    BUILD_VER=8
-  fi
-
-elif [ "$UNAME_OS_ARCH" = "HP-UX" ]; then
-  BUILD_ARCH=HPPA
-  BUILD_OS=$UNAME_OS_ARCH
-  BUILD_VER=$OS_RELEASE
-
-elif [ "$UNAME_OS_ARCH" = "AIX" ]; then
-  BUILD_ARCH=POWER
-  BUILD_OS=$UNAME_OS_ARCH
-  BUILD_VER=`uname -v`.`uname -r`
-  OS_CONFIG=${BUILD_OS}${BUILD_VER}
-
-elif [ "$UNAME_OS_ARCH" = "OSF1" ]; then
-  BUILD_ARCH=ALPHA
-  BUILD_OS=$UNAME_OS_ARCH
-  BUILD_VER=$OS_RELEASE
-
-elif [ "$UNAME_OS_ARCH" = "IRIX64" -o "$UNAME_OS_ARCH" = "IRIX" ]; then
-  BUILD_ARCH=MIPS
-  BUILD_OS=IRIX
-  BUILD_VER=$OS_RELEASE
-  OS_CONFIG=${BUILD_OS}${OS_RELEASE}
-
-elif [ "$UNAME_OS_ARCH" = "BSD/386" ]; then
-  BUILD_ARCH=x86
-  BUILD_OS=BSDI
-  BUILD_VER=$OS_RELEASE
-
-elif [ "$UNAME_OS_ARCH" = "FreeBSD" ]; then
-  BUILD_ARCH=`uname -p`
-  BUILD_OS=$UNAME_OS_ARCH
-  BUILD_VER=$UNAME_OS_RELEASE
-  if [ "$BUILD_ARCH" = "i386" ]; then
-    BUILD_ARCH=x86
-  fi
-  OS_CONFIG=${BUILD_OS}${BUILD_VER}_${BUILD_ARCH}
-
-elif [ "$UNAME_OS_ARCH" = "SCO_SV" ]; then
-  BUILD_ARCH=x86
-  BUILD_OS=SCO
-  BUILD_VER=$OS_RELEASE
-
-elif [ "$UNAME_OS_ARCH" = "UNIX_SV" ]; then
-  # Check for braindamage
-  grep NCR /etc/bcheckrc > /dev/null 2>&1
-  BUILD_ARCH=x86
-  if [ $? = 0  ]; then
-      BUILD_OS=NCR
-  else
-      BUILD_OS=UNIXWARE
-  fi
-  BUILD_VER=$OS_RELEASE
-
-elif [ "$UNAME_OS_ARCH" = "NEWS-OS" ]; then
-  BUILD_ARCH=`uname -p`
-  BUILD_OS=SONY
-  BUILD_VER=$OS_RELEASE
-
-elif [ "$UNAME_OS_ARCH" = "UNIX_System_V" ]; then
-  BUILD_ARCH=`uname -p`
-  BUILD_OS=NEC
-  BUILD_VER=$OS_RELEASE
-
-elif [ $UNAME_OS_ARCH = Linux ]; then
-  BUILD_ARCH=`uname -m`
-  if [ -n "`echo $BUILD_ARCH | grep -e '86$'`" ] ; then
-	  BUILD_ARCH=x86
-  fi
-  BUILD_OS=$UNAME_OS_ARCH
-  BUILD_VER=`echo $OS_RELEASE | cut -f1,2 -d.`
-  OS_CONFIG=${BUILD_OS}${BUILD_VER}_${BUILD_ARCH}
-fi
-
-case "$UNAME_OS_ARCH" in
-SINIX*|ReliantUNIX*)
-  BUILD_ARCH=`uname -p`
-  BUILD_OS="ReliantUNIX"
-  BUILD_VER=$OS_RELEASE
-  ;;
-esac
-
-#PLATFORM=${BUILD_ARCH}_${BUILD_OS}_${BUILD_VER}
-#echo $PLATFORM
-echo $OS_CONFIG

mozilla/mstone/bin/process

@@ -1,70 +0,0 @@
-#!/bin/sh
-# The conZtents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1999-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# re-process a data run
-# by default, use the most recent one
-# Usage: process
-# or
-# Usage: process TIMESTAMP [args...]
-# or
-# Usage: process results/TIMESTAMP [args...]
-
-if [ ! -x perl/bin/perl -o ! -f .license ] ; then # see if setup was ever run
-   echo "Critical files are missing.  Run setup."
-   exit 2;
-fi
-
-if [ $# -lt 1 ] ; then		# do most recent run
-	# since the directories are time stamps with fixed fields,
-	#  alphabetical order is also time order
-	dir=`ls -d results/[0-9]*.[0-9]* | tail -1`
-else				# use specified run
-	if  [ -d results/$1 ] ; then	#  timestamp
- 	    dir=results/$1
-	    shift
-	elif  [ -d $1 ] ; then	# results/timestamp
- 	    dir=$1
-	    shift
-	fi
-fi
-
-if [ -n "$dir" ] ; then
-	if  [ -f $dir/all.wld ] ; then	# unified workload file
-		perl/bin/perl -Ibin -- bin/process.pl -w $dir/all.wld "$@"
-	else			# BACK COMPATIBILITY form
-		perl/bin/perl -Ibin -- bin/process.pl -c $dir/config.cfg "$@"
-	fi
-else				# pass in whatever they gave us
-	perl/bin/perl -Ibin -- bin/process.pl "$@"
-fi

mozilla/mstone/bin/process.pl

@@ -1,371 +0,0 @@
-#!/usr/bin/env perl
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# Generate reports independently of mailmaster
-# Can be used during a run or after mailmaster has finished
-
-print "Netscape Mailstone\n";
-print "Copyright (c) 1997-2000 Netscape Communications Corp.\n";
-
-# this parses the command line and config file
-do 'args.pl'|| die $@;
-parseArgs();			# parse command line
-setConfigDefaults();		# pick up any missing defaults
-
-$resultdir = "$resultbase/$params{TSTAMP}";
-$tmpdir = "$tmpbase/$params{TSTAMP}";
-$resultstxt = "$resultdir/results.txt";
-$resultshtml = "$resultdir/results.html";
-
-if ($params{TESTBED}) {		# BACK COMPATIBILITY
-    $params{TESTBED} = "$resultdir/testbed.tbd"; # use saved testbed
-    # open the saved testbed conf file
-    readTestbedFile($params{TESTBED}) || die "$@\n";
-}
-
-# Convert old style to new.  Write the complete inclusive workload
-writeWorkloadFile ("$resultdir/all.wld", \@workload)
-    unless ((-r "$resultdir/all.wld") || (-r "$resultdir/all.wld.gz"));
-
-$testsecs = figureTimeSeconds ($params{TIME}, "minutes");
-
-print "Starting data reduction\n";
-
-sub readClientCSV {
-    my $file = shift;
-    my @fields;
-    my $line;
-
-    print "Reading client summary: $file\n";
-    open(CSV, "<$file")	||	# Summary of all clients
-	open(CSV, "gunzip -c $file.gz |") || 
-	    return 0;		# failed
-
-    # Title line: Verify that arguments are in the same order
-    $line = <CSV>;
-    unless ($line) {
-	print "readClientCSV: Error reading $file. \n";
-	return 0;
-    }
-    chomp $line;		# strip newline
-    @fields = split /,/, $line; # turn into an array
-    my $cli = shift @fields;	# pull off client header
-    my $cn = shift @fields;	# pull off num header
-    my $pro = shift @fields;	# pull off protocol header
-
-    # Client array, per variable, per protocol
-    foreach $p (@protocols) {
-	# This hash will hold the timers
-	$clidata{$p} = ArrayInstance->new();
-	foreach $t (@timers) {
-	    # This hash will hold the values in the timer
-	    $clidata{$p}->{$t} = ArrayInstance->new();
-	    foreach $f (@{$timerFields{$t}}) {
-		# This hash that will hold the actual values per client
-		$clidata{$p}->{$t}->{$f} = ArrayInstance->new();
-	    }
-	}
-	foreach $t (@scalarClientFields) { # non-timer fields
-	    # This hash that will hold the actual values per client
-	    $clidata{$p}->{$t} = ArrayInstance->new();
-	}
-    }
-
-    foreach $f (@commClientFields) { # proto independent
-	my $v = shift @fields;
-	if ($v !~ m/$f/i) {
-	    print "readClientCSV: Protocol order mismatch '$v', '$f' \n";
-	    return 0;
-	}
-    }
-    foreach $t (@timers) {	# timers
-	foreach $f (@{$timerFields{$t}}) {
-	    my $v = shift @fields;
-	    if ($v !~ m/$t:$f/i) {
-		print "readClientCSV: Protocol order mismatch '$v', '$t:$f' \n";
-		return 0;
-	    }
-	}
-    }
-    foreach $t (@scalarClientFields) { # scalars
-	my $v = shift @fields;
-	if ($v !~ m/$t/i) {
-	    print "readClientCSV: Protocol order mismatch '$v', '$t' \n";
-	    return 0;
-	}
-    }
-
-    # Now read actual data
-    while (<CSV>) {
-	chomp;			# strip newline
-	@fields = split /,/;	# turn into an array
-	my $cli = shift @fields; # pull off client header
-	my $cn = shift @fields;	# pull off num header
-	my $p = shift @fields;	# pull off protocol header
-	my $cp = $clidata{$p};
-
-	# Create the needed finals arrays
-	unless ($finals{$p}) {
-	    #print "Creating finals{$p}\n"; # DEBUG
-	    $finals{$p} = ArrayInstance->new();
-	    foreach $t (@timers) {
-		$finals{$p}->{$t} = ArrayInstance->new();
-	    }
-	}
-
-	foreach $f (@commClientFields) { # proto independent
-	    $cliGen{$f}->{$cn} = shift @fields;
-	}
-	foreach $t (@timers) {	# timers
-	    foreach $f (@{$timerFields{$t}}) {
-		$cp->{$t}->{$f}->{$cn} = shift @fields;
-		$finals{$p}->{$t}->{$f} += $cp->{$t}->{$f}->{$cn};
-	    }
-	}
-	foreach $t (@scalarClientFields) { # scalars
-	    $cp->{$t}->{$cn} = shift @fields;
-	    $finals{$p}->{$t} += $cp->{$t}->{$cn};
-	}
-
-	foreach $section (@workload) { # find thread count for this client
-	    next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	    next unless ($section->{sectionParams} =~ /$cli/);
-	    #print "Process $cli has threads $section->{THREADS}\n";
-	    $reportingClients += ($section->{THREADS})
-		? $section->{THREADS} : 1;
-	    last;
-	}
-    }
-
-    close (CSV);
-    return 1;			# success
-}
-
-sub readTimeCSV {
-    my $file = shift;
-    my $p = shift;
-    my $gp = $graphs{$p};
-    my $line;
-
-    print "Reading time $p summary: $file\n";
-    open(CSV, "<$file")	||	# Summary over time
-	open(CSV, "gunzip -c $file.gz |") || 
-	    return 0;		# failed
-
-    # Verify that arguments are in the same order
-    $line = <CSV>;
-    unless ($line) {
-	print "readTimeCSV: Error reading $file. \n";
-	return 0;
-    }
-    chomp $line;		# strip newline
-    @fields = split /,/, $line;
-    my $t = shift @fields;	# pull off time header
-    foreach $t (@timers) {
-	foreach $f (@{$timerFields{$t}}) {
-	    my $v = shift @fields;
-	    if ($v !~ m/$t:$f/i) {
-		print "readTimeCSV: Protocol order mismatch '$v', '$t:$f' \n";
-		return 0;
-	    }
-	}
-    }
-    foreach $t (@scalarGraphFields) {
-	my $v = shift @fields;
-	if ($v !~ m/$t/i) {
-	    print "readTimeCSV: Protocol order mismatch '$v', '$t' \n";
-	    return 0;
-	}
-    }
-    while (<CSV>) {
-	chomp;
-	#print "LINE: $_\n";
-	@fields = split /,/;
-	my $tm = shift @fields;	# pull off time header
-	#print "t=$t ";
-	foreach $t (@timers) {
-	    foreach $f (@{$timerFields{$t}}) {
-		$gp->{$t}->{$f}->{$tm} = shift @fields;
-		#print "$v=$gp->{$v}->{$tm} ";
-	    }
-	}
-	foreach $t (@scalarGraphFields) {
-	    $gp->{$t}->{$tm} = shift @fields;
-	    #print "$v=$gp->{$v}->{$tm} ";
-	}
-	#print "\n";
-    }
-    close (CSV);
-    return 1;			# success
-}
-
-sub loadCSV {
-    my @csvs = <$resultdir/time-*.csv>;
-    @csvs = <$resultdir/time-*.csv.gz> unless (@csvs);
-    return 0 unless (@csvs);	# no time.csv files
-
-    # stuff normally done from reduce.pl (should all be in protoconf?)
-    # Basic sanity check
-    return 0 unless ($testsecs > 0);
-
-    $startTime = 0;			# these are timeInSeconds/$timeStep
-    $endTime = 0;
-
-    # keep graphs with somewhat more precision than sample rate;
-    $timeStep = int ($params{FREQUENCY} / 2);
-    if ($timeStep < 1) { $timeStep = 1; }
-
-    # global results initialization
-    $reportingClients = 0;
-    $totalProcs = 0;		# number of clients started
-
-    foreach $f (@commClientFields) { # protocol independent fields
-	$cliGen{$f} = ArrayInstance->new();
-    }
-
-    return 0 unless (readClientCSV ("$resultdir/clients.csv")); # client info
-
-    foreach $c (@csvs) { # read time info
-	$c =~ s/.gz$//;		# strip .gz extension
-	my $p = $c;		# strip down to protocol portion
-	$p =~ s/$resultdir\/time-//;
-	$p =~ s/.csv$//;
-	return 0 unless (readTimeCSV ($c, $p));
-    }
-
-    return 0 unless ($reportingClients > 0);
-
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my @hlist = split /[\s,]/, $slist;
-	my $hcnt = (1 + $#hlist);
-	my $pcount = $section->{PROCESSES};
-	my $tcount = ($section->{THREADS}) ? $section->{THREADS} : 1;
-
-	$totalProcs += $pcount * $tcount * $hcnt;
-    }
-
-    # Find time extent for a key graph
-    ($startTime, $endTime) = dataMinMax ("blocks", \@protocols,
-					 $startTime, $endTime);
-
-    $realTestSecs = ($endTime - $startTime) * $timeStep;
-    $realTestSecs = 1 unless ($realTestSecs); # in case of small MaxBlocks
-    printf "Reported test duration %d seconds with %d second resolution\n",
-    $realTestSecs, $timeStep;
-    $realTestSecs = $testsecs if ($realTestSecs > $testsecs);
-
-    my @newProtos;	# figure real protocol list
-    foreach $p (@protocols) {
-	my $gp = $graphs{$p};
-	my $numValid = 0;
-	# See if there is real data here
-	CHECKVAL: foreach $t (@timers) {
-	    foreach $f (@{$timerFields{$t}}) {
-		my $vp = $gp->{$t}->{$f};
-		next unless ($vp);	# no data
-		next unless (scalar %$vp); # redundant???
-
-		#print "Checking: $p $t $f => ENTRIES\n";
-		$numValid++;
-		last CHECKVAL;
-	    }
-	}
-	($numValid > 0) || next;
-
-	push @newProtos, $p;
-    }
-    # update protocol list to only have what was used
-    @protocols = @newProtos;
-    @protocolsAll = @newProtos;
-    push @protocolsAll, "Total";
-}
-
-
-my $doFull = 1;			# re-processing is currently broken
-
-#  if (!((-f "$resultdir/clients.csv")
-#        || (-f "$resultdir/clients.csv.gz"))) { # no processing yet
-#      $doFull = 1;
-#  } else {			# see if any source is newer than csv
-#      foreach $section (@workload) {
-#  	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-#  	my $slist = $section->{sectionParams};
-#  	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-#  	foreach $cli (split /[\s,]/, $slist) {
-#  	    my $fname = getClientFilename ($cli, $section);
-#  	    if ((-r $fname)	# raw source exists
-#  		&& ((-M "$resultdir/clients.csv")
-#  		    > (-M $fname))) { # newer
-#  		#print "$fname is newer than $resultdir/clients.csv\n";
-#  		$doFull++;
-#  		last;
-#  	    }
-#  	}
-#      }
-#  }
-
-#  unless ($doFull) {		# do CSV load
-#      # if this is a csv only run, then these may not exist yet
-#      mkdir ("$tmpbase", 0775);
-#      mkdir ("$tmpdir", 0775);
-#      unless (-r "$resultbase/index.html") {
-#  	do 'makeindex.pl' || warn "$@\n";	# html index
-#      }
-
-#      $doFull = 1 unless (loadCSV); # if CSV fails, fall back to full processing
-#  }
-
-if ($doFull) {
-    do 'reduce.pl' || die "$@\n";
-}
-
-
-print "Generating results pages:\t", scalar (localtime), "\n";
-
-do 'report.pl' || die "$@\n";
-
-# Now display that data to console
-if ($params{VERBOSE}) {
-    fileShow ($resultstxt);
-    print "\n";
-}
-
-pathprint ("\nResults (text):\t$resultstxt\n");
-pathprint (  "Results (HTML):\t$resultshtml\n");
-print        "Index of runs: \tfile://$cwd/$resultbase/index.html\n";
-
-print "Process done:\t", scalar (localtime), "\n";

mozilla/mstone/bin/protoconf.pl

@@ -1,158 +0,0 @@
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# This define the structures that hold summary, client, and graph data,
-
-# This sets the names used for display.  Can be internationalized.
-# All top level names are here (both timers and scalars).
-# Any unlisted names will map to themselves.
-%timerNames
-    = (
-       #internal name,	Printed name
-       "total",		"total",
-       "conn",		"connect",
-       "reconn",	"reconnect",
-       "banner",	"banner",
-       "login",		"login",
-       "cmd",		"command",
-       "submit",	"submit",
-       "retrieve",	"retrieve",
-       "logout",	"logout",
-       "idle",		"idle",
-       "connections",	"connections",
-       "blocks",	"blocks",
-       );
-
-# This sets the names used for display.  Can be internationalized.
-%fieldNames
-    = (
-       #internal name,	Printed name
-       "Try",		"Try",
-       "Error",		"Error",
-       "BytesR",	"BytesR",
-       "BytesW",	"BytesW",
-       "Time",		"Time",
-       "TimeMin",	"TMin",
-       "TimeMax",	"TMax",
-       "Time2",		"TStd",
-       );
-
-
-# hold time graphs for each protocol
-%graphs = ();
-
-# Totals are done during plotting, if needed
-%finals = ();			# create base finals hash
-
-# These are sections that dont get passed to mailclient (case insensitive)
-@scriptWorkloadSections
-    = (
-       "Config",		# special, references %params
-       "Client",		# testbed client(s)
-       "Graph",			# graph generation
-       "Setup",			# things to run with ./setup
-       "Startup",		# things to run before test
-       "Monitor",		# other performance monitoring
-       "PreTest",		# things to run before test
-       "PostTest",		# things to run after test
-       );
-
-# These are sections that arent protocols.  Anything else must be.
-@nonProtocolSections
-    = (@scriptWorkloadSections, ("Default"));
-
-# These are the known workload parameters (as they will print)
-# These are coerced to upper case internally (do NOT internationize)
-@workloadParameters
-    = (
-       "addressFormat",
-       "arch",
-       "blockID",
-       "blockTime",
-       "chartHeight",
-       "chartPoints",
-       "chartWidth",
-       "clientCount",
-       "command",
-       "comments",
-       "file",
-       "firstAddress",
-       "firstLogin",
-       "frequency",
-       "gnuplot",
-       "group",
-       "idleTime",
-       "leaveMailOnServer",
-       "loginFormat",
-       "loopDelay",
-       "numAddresses",
-       "numLogins",
-       "numLoops",
-       "numRecips",
-       "mailClient",
-       "maxBlocks",
-       "maxClients",
-       "maxErrors",
-       "maxThreads",
-       "maxProcesses",
-       "passwdFormat",
-       "processes",
-       "rampTime",
-       "rcp",
-       "rsh",
-       "sequentialAddresses",
-       "sequentialLogins",
-       "server",
-       "smtpMailFrom",
-       "sysConfig",
-       "threads",
-       "telemetry",
-       "tempDir",
-       "time",
-       "title",
-       "TStamp",
-       "useAuthLogin",
-       "useEHLO",
-       "weight",
-       "wmapBannerCmds",
-       "wmapClientHeader",
-       "wmapInBoxCmds",
-       "wmapLoginCmd",
-       "wmapLoginData",
-       "wmapLogoutCmds",
-       "wmapMsgReadCmds",
-       "wmapMsgWriteCmds",
-       "workload",
-       );
-       
-return 1;

mozilla/mstone/bin/report.pl

@@ -1,605 +0,0 @@
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1997-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# This file deals with the summary data only
-
-# Should be packages
-do 'genplot.pl' || die "$@\n";
-
-sub walkSetupTotals {
-    my $a = shift; my $f = shift; my $p = shift;
-    if ($p =~ /(\w+):(\w+):$/) {
-	my $tm = $2;
-	if (!($finals{Total}->{$tm}->{$f})) {
-	    $finals{Total}->{$tm}->{$f} = $a;
-	} elsif ($f =~ /Min$/) {
-	    $finals{Total}->{$tm}->{$f} = $a
-		if (($a > 0.0) && ($a < $finals{Total}->{$tm}->{$f}));
-	} elsif ($f =~ /Max$/) {
-	    $finals{Total}->{$tm}->{$f} = $a if ($a > $finals{Total}->{$tm}->{$f});
-	} else {
-	    $finals{Total}->{$tm}->{$f} += $a;}
-    }
-    elsif ($p =~ /(\w+):$/) {
-	$finals{Total}->{$f} += $a;
-    }
-}
-
-sub setupTotals {
-    # Figure out combined timers for "Total" protocol
-    # We might do a smarter merge here (look at context and try to match order)
-    # As long as the first protocol is a superset, it wont matter
-    my @tnames;
-    foreach $proto (@protocols) {
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;
-	    $t =~ s/([][{}*+?^.\/])/\\$1/g; # quote regex syntax
-	    my $found = 0;
-	    foreach $tn (@tnames) { # see if it is in the list already
-		next unless ($tn =~ /$t/);
-		$found = 1;
-		last;
-	    }
-	    #print "proto $proto: Found $n\n" if ($found > 0);
-	    next if ($found > 0);
-	    #print "proto $proto: Add $n\n";
-	    push @tnames, $n;	# add to list
-	}
-    }
-    #print "'Total' timers @tnames\n";
-    $protocolFields{"Total"} = \@tnames;
-
-    # Create "Total" hashes
-    $finals{Total} =  ArrayInstance->new();
-    foreach $n (@{$protocolFields{"Total"}}) { # all timers
-	my $t = $n;	# dont modify original list
-	if ($t =~ /^\[(\w+)\]$/) { # Timer case, strip off brackets
-	    $finals{Total}->{$1} = ArrayInstance->new();
-	    #print "Creating Total timer field $1\n";
-	} else {		# scalar
-	    $finals{Total}->{$n} = 0;
-	    #print "Creating Total scalar field $n\n";
-	}
-    }
-
-    # Total finals array
-    foreach $proto (@protocols) {
-	foreach $t (@{$protocolFields{$proto}}) {
-	    if ($t =~ /^\[(\w+)\]$/) { # Timer case, strip off brackets
-		my $tm = $1;
-		foreach $f (@timerFieldsAll) {
-		    my $a = $finals{$proto}->{$tm}->{$f};
-		    if (!($finals{Total}->{$tm}->{$f})) { # never touched
-			$finals{Total}->{$tm}->{$f} = $a;
-		    } elsif ($f =~ /Min$/) {
-			$finals{Total}->{$tm}->{$f} = $a
-			    if (($a > 0.0)
-				&& ($a < $finals{Total}->{$tm}->{$f}));
-		    } elsif ($f =~ /Max$/) {
-			$finals{Total}->{$tm}->{$f} = $a
-			    if ($a > $finals{Total}->{$tm}->{$f});
-		    } else {
-			$finals{Total}->{$tm}->{$f} += $a;
-		    }
-		}
-	    } else {
-		$finals{Total}->{$t} += $finals{$proto}->{$t};
-	    }
-	}
-    }    
-		    
-    # Convert Time2 to standard deviation
-    foreach $proto (@protocolsAll) {
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;	# dont modify original list
-	    if ($t =~ /^\[(\w+)\]$/) { $t = $1; } # strip off brackets
-	    next unless ($finals{$proto}->{$t}); # proto doesnt have timer
-	    next unless ($finals{$proto}->{$t}->{Try});
-	    next unless ($finals{$proto}->{$t}->{Time2} > 0);
-	    my $ss = $finals{$proto}->{$t}->{Time2};
-	    my $tot = $finals{$proto}->{$t}->{Time};
-	    my $n = $finals{$proto}->{$t}->{Try};
-	    next unless ($n > 0); # skip if this is 0
-
-	    my $var = ($ss - (($tot * $tot) / $n)) / $n;
-	    print "$proto->$t var < 0: Time2=$ss Time=$tot n=$n\n"
-		if ($var < 0);
-	    $finals{$proto}->{$t}->{Time2} = ($var > 0) ? sqrt ($var) : 0.0;
-	}
-    }
-
-    # Divide total times by trys to get averate time
-    foreach $proto (@protocolsAll) {
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;	# dont modify original list
-	    if ($t =~ /^\[(\w+)\]$/) { $t = $1; } # strip off brackets
-	    next unless ($finals{$proto}->{$t}); # proto doesnt have timer
-	    ($finals{$proto}->{$t}->{Try}) || next;
-	    $finals{$proto}->{$t}->{Time} /= $finals{$proto}->{$t}->{Try}
-	}
-    }
-}
-
-# The text version is designed to be machine processable
-# commify and kformat are not used
-sub genTextReport {
-    fileBackup ($resultstxt);	# if processing as we go, backup old file
-    # Open a text file to hold the results
-    open(RESULTSTXT, ">$resultstxt") || 
-	die "Couldn't open $resultstxt: $!";
-
-    # Store results as text
-    printf RESULTSTXT "---- Mozilla MailStone Results $params{TSTAMP} ----\n";
-
-    printf RESULTSTXT "\t\t%s\n", $params{TITLE};
-    printf RESULTSTXT "\t\t%s\n", $params{COMMENTS};
-    printf RESULTSTXT "\n";
-    printf RESULTSTXT "Test duration: %d %s.  Rampup: %d %s.  Reported duration %s seconds\n",
-    figureTimeNumber ($params{TIME}),
-    figureTimeUnits ($params{TIME}, "minutes"),
-    figureTimeNumber ($params{RAMPTIME}),
-    figureTimeUnits ($params{RAMPTIME}, "seconds"), $realTestSecs;
-    printf RESULTSTXT "Number of reporting clients: %s of %s\n",
-    $reportingClients, $totalProcs;
-
-    foreach $proto (@protocolsAll) {
-	# do op counters
-	printf RESULTSTXT "\n%-15s  ", $proto;
-	foreach $f (@timerFieldsAll) {
-	    #($f =~ m/^Time2$/o) && next;
-	    printf RESULTSTXT "%13s",
-	    ($fieldNames{$f}) ? $fieldNames{$f} : $f;
-	}
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;	# dont modify original list
-	    unless ($t =~ /^\[(\w+)\]$/) { # scalar case
-		#next;		# skip scalars for now
-		# do scalar counters. Column should line up with "Try"
-		printf RESULTSTXT "\n%-15s  ",
-		$proto . ":" . (($timerNames{$t}) ? $timerNames{$t} : $t);
-		printf RESULTSTXT
-		    "%13s", $finals{$proto}->{$t};
-		next;
-	    } else {		# strip off brackets
-		$t = $1;
-	    }
-	    printf RESULTSTXT "\n%-15s  ",
-	    $proto . ":" . (($timerNames{$t}) ? $timerNames{$t} : $t);
-	    foreach $f (@timerFieldsAll) {
-		#($f =~ m/^Time2$/o) && next;
-		if ($f =~ m/Time/o) {
-		    printf RESULTSTXT
-			"%13.3f", $finals{$proto}->{$t}->{$f};
-		} elsif ($f =~ m/Bytes/o) {
-		    printf RESULTSTXT
-			"%13d", $finals{$proto}->{$t}->{$f};
-		} else {
-		    printf RESULTSTXT
-			"%13s", $finals{$proto}->{$t}->{$f};
-		}
-	    }
-	}
-
-	# do ops/sec
-	printf RESULTSTXT "\n\n%-15s  ", $proto;
-	foreach $f (@timerFieldsAll) {
-	    ($f =~ m/^Time/o) && next;
-	    printf RESULTSTXT "%9s/sec", 
-	    ($fieldNames{$f}) ? $fieldNames{$f} : $f;
-	}
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;	# dont modify original list
-	    unless ($t =~ /^\[(\w+)\]$/) { # scalar case
-		#next;		# skip scalars for now
-		# do scalar counter/sec. Column should line up with "Try"
-		printf RESULTSTXT "\n%-15s  ",
-		$proto . ":" . (($timerNames{$t}) ? $timerNames{$t} : $t) . "/s";
-		printf RESULTSTXT
-		    "%13.3f", $finals{$proto}->{$t} / $realTestSecs;
-		next;
-	    } else {
-		$t = $1;
-	    }
-	    printf RESULTSTXT "\n%-15s  ",
-	    $proto . ":" . (($timerNames{$t}) ? $timerNames{$t} : $t) . "/s";
-	    foreach $f (@timerFieldsAll) {
-		($f =~ m/^Time/o) && next;
-		if ($f =~ m/Bytes/o) {
-		    printf RESULTSTXT
-			"%13d",
-			$finals{$proto}->{$t}->{$f} / $realTestSecs;
-		} else {
-		    printf RESULTSTXT
-			"%13.3f",
-			$finals{$proto}->{$t}->{$f} / $realTestSecs;
-		}
-	    }
-	}
-	printf RESULTSTXT "\n\n";
-    }
-
-    if ($params{SYSCONFIG}) {
-	print RESULTSTXT "\nSytem config details\n";
-	if (($params{SYSCONFIG} =~ m/^\S+$/o)
-	    && (open(SCFILE, "<$params{SYSCONFIG}"))) {
-	    while (<SCFILE>) {
-		(m/^<\S+>\s*$/o) && next; # skip HTML only on them
-		s/<\S+>//g;	# trim out obvious HTML commands
-		s/<!--.*-->//g;	# trim out HTML comments
-		print RESULTSTXT $_;
-	    }
-	    close(SCFILE);
-	} else {
-	    my $l = $params{SYSCONFIG};	# filter similar to above
-	    $l =~ s/<\S+>//g;	# trim out obvious HTML commands
-	    $l =~ s/<!--.*-->//g; # trim out HTML comments
-	    $l =~ s/\\\n/\n/g;	# turn quoted newline to plain newline
-	    print RESULTSTXT $l;
-	}
-    }
-
-    close(RESULTSTXT);
-}
-
-# Write the main part of the HTML page
-sub genHTMLReportStart {
-    fileBackup ($resultshtml);	# if processing as we go, backup old file
-    # Open an html file to hold the results
-    open(RESULTSHTML, ">$resultshtml") || 
-	die "Couldn't open $resultshtml: $!";
-
-    print RESULTSHTML <<END;
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
-<HTML>
-<A NAME=TitleSection>
-<TITLE>
-Mozilla MailStone Results $params{TSTAMP}
-</TITLE>
-</A>
-<HEAD>
-</HEAD>
-<BODY TEXT="#000000" BGCOLOR="#FFFFFF" LINK="#0000FF" VLINK="#FF0000" ALINK="#000088">
-<CENTER>
-<HR NOSHADE WIDTH="100%">
-<H1>Mozilla MailStone Results $params{TSTAMP}</H1>
-<H2>$params{TITLE}</H2>
-<I>$params{COMMENTS}</I>
-<HR WIDTH="100%">
-</CENTER>
-
-END
-    printf RESULTSHTML "<BR><B>Test duration:</B> %d %s.  ",
-    figureTimeNumber ($params{TIME}),
-    figureTimeUnits ($params{TIME}, "minutes");
-    printf RESULTSHTML "<B>Rampup:</B> %d %s.  ",
-    figureTimeNumber ($params{RAMPTIME}),
-    figureTimeUnits ($params{RAMPTIME}, "seconds");
-    printf RESULTSHTML "<B>Reported duration:</B> %s seconds\n",
-    commify ($realTestSecs);
-
-    printf RESULTSHTML "<BR><B>Reporting clients:</B> %s of %s\n",
-    commify ($reportingClients), commify ($totalProcs);
-
-    print RESULTSHTML <<END;
-<BR>
-Test <A HREF="all.wld">complete workload</a> description.  
-Filtered <A HREF="work.wld">workload</a> description.
-<BR>
-Plain <A HREF="results.txt">text version</a> of results.  
-Log of <A HREF="stderr">stderr</a> and debugging output.
-<BR>
-
-<A NAME=MonitoringSection></A>
-END
-
-    {				# list user requested logging
-	my @logfiles = <$resultdir/*-pre.log>;
-	if (@logfiles) {
-	    foreach $f (@logfiles) {
-		$f =~ s/$resultdir\///o; # strip directory out
-		$f =~ s/-pre\.log$//o; # strip extension off
-		print RESULTSHTML "Pre test log: <A HREF=\"$f-pre.log\">$f</a><BR>\n";
-	    }
-	}
-	@logfiles = <$resultdir/*-run.log>;
-	if (@logfiles) {
-	    foreach $f (@logfiles) {
-		$f =~ s/$resultdir\///o; # strip directory out
-		$f =~ s/-run\.log$//o; # strip extension off
-		print RESULTSHTML "Monitoring log: <A HREF=\"$f-run.log\">$f</a><BR>\n";
-	    }
-	}
-	@logfiles = <$resultdir/*-post.log>;
-	if (@logfiles) {
-	    foreach $f (@logfiles) {
-		$f =~ s/$resultdir\///o; # strip directory out
-		$f =~ s/-post\.log$//o; # strip extension off
-		print RESULTSHTML "Post test log: <A HREF=\"$f-post.log\">$f</a><BR>\n";
-	    }
-	}
-    }
-
-    #print RESULTSHTML
-	#"<CENTER><H2>Results per protocol</H2></CENTER>\n";
-
-    foreach $proto (@protocolsAll) {
-	printf RESULTSHTML "<A NAME=%sTable></A>\n", $proto;
-	printf RESULTSHTML
-	    "<TABLE BORDER=2 CELLSPACING=2 CELLPADDING=2 COLS=%d WIDTH=\"95%%\">",
-	    2+$#{@{$protocolFields{$proto}}};
-	print RESULTSHTML
-	    "<CAPTION>$proto Counters</CAPTION>\n";
-	# do op counters
-	print RESULTSHTML
-	    "<TR><TH>$proto</TH>\n";
-	foreach $f (@timerFieldsAll) {
-	    #($f =~ m/^Time2$/o) && next;
-	    printf RESULTSHTML "<TH>%s</TH> ",
-	    ($fieldNames{$f}) ? $fieldNames{$f} : $f;
-	}
-	print RESULTSHTML
-	    "</TR>\n";
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;	# dont modify original list
-	    unless ($t =~ /^\[(\w+)\]$/) { # scalar case
-		next;		# skip scalars for now
-		# do scalar counters. Column should line up with "Try"
-		printf RESULTSHTML "<TR ALIGN=RIGHT><TH>%s</TH>\n",
-		($timerNames{$t}) ? $timerNames{$t} : $t;
-		printf RESULTSHTML
-		    "<TD>%s</TD> ",
-		    commify ($finals{$proto}->{$t});
-		next;
-	    } else {
-		$t = $1;
-	    }
-	    printf RESULTSHTML "<TR ALIGN=RIGHT><TH>%s</TH>\n",
-	    ($timerNames{$t}) ? $timerNames{$t} : $t;
-	    foreach $f (@timerFieldsAll) {
-		#($f =~ m/^Time2$/o) && next;
-		if ($f =~ m/Time/o) {
-		    printf RESULTSHTML
-			"<TD>%s</TD> ",
-			tformat ($finals{$proto}->{$t}->{$f});
-		} elsif ($f =~ m/Bytes/o) {
-		    printf RESULTSHTML
-			"<TD>%s</TD> ",
-			kformat ($finals{$proto}->{$t}->{$f});
-		} else {
-		    printf RESULTSHTML
-			"<TD>%s</TD> ",
-			commify ($finals{$proto}->{$t}->{$f});
-		}
-	    }
-	    print RESULTSHTML "</TR>\n";
-	}
-
-	# do ops/sec
-	print RESULTSHTML
-	    "<TR><TH>$proto</TH>\n";
-	foreach $f (@timerFieldsAll) {
-	    ($f =~ m/^Time/o) && next;
-	    printf RESULTSHTML "<TH>%s/sec</TH> ",
-	    ($fieldNames{$f}) ? $fieldNames{$f} : $f;
-	}
-	print RESULTSHTML
-	    "</TR>\n";
-	foreach $n (@{$protocolFields{$proto}}) {
-	    my $t = $n;	# dont modify original list
-	    unless ($t =~ /^\[(\w+)\]$/) { # scalar case
-		next;		# skip scalars for now
-		# do scalar counters. Column should line up with "Try"
-		printf RESULTSHTML "<TR ALIGN=RIGHT><TH>%s</TH>\n",
-		($timerNames{$t}) ? $timerNames{$t} : $t;
-		printf RESULTSHTML
-		    "<TD>%.3f</TD> ",
-		    $finals{$proto}->{$t} / $realTestSecs;
-		next;
-	    } else {
-		$t = $1;
-	    }
-	    printf RESULTSHTML "<TR ALIGN=RIGHT><TH>%s</TH>\n",
-	    ($timerNames{$t}) ? $timerNames{$t} : $t;
-	    foreach $f (@timerFieldsAll) {
-		($f =~ m/^Time/o) && next;
-		if ($f =~ m/Bytes/o) {
-		    printf RESULTSHTML
-			"<TD>%s</TD> ",
-			kformat ($finals{$proto}->{$t}->{$f} / $realTestSecs);
-		} else {
-		    printf RESULTSHTML
-			"<TD>%.3f</TD> ",
-			$finals{$proto}->{$t}->{$f} / $realTestSecs;
-		}
-	    }
-	    print RESULTSHTML "</TR>\n";
-	}
-	printf RESULTSHTML "</TABLE> <BR>\n\n";
-    }
-
-    print RESULTSHTML <<END;
-
-<BR>
-
-<CENTER>
-<A NAME=GraphSection></A>
-END
-}
-
-%genplotGraphs = ();
-
-# Call genplot; and, if a graph is generated, insert the HTML reference to it
-sub genHTMLReportGraph {
-    my $name = shift;
-    my $title = shift;
-    my $label = shift;
-    my $protos = shift || die "genHTMLReportGraph: '$name' missing protocols";
-    my $field = shift;
-    my $vars = shift || die "genHTMLReportGraph: '$name' missing vars";
-
-    if ($genplotGraphs{$name}) {
-	print "Graph $name has already been generated.\n";
-	return;
-    }
-
-    $genplotGraphs{$name} = $title;
-
-    # Delineate and tag each graph
-    print RESULTSHTML "<A NAME=$name><HR SIZE=4 WIDTH=\"90%\"></A>\n";
-    if (genPlot ($name, $title, $label, $protos, $field, $vars) > 0) {
-	print RESULTSHTML <<END;
-<P><H3>$title</H3>
-<IMG SRC=$name.$params{IMAGETYPE} ALT="$label"></P>
-END
-    } else {
-	print RESULTSHTML "<BR>Graph \"$name\" contained no data (@{$vars}).<BR>\n";
-    }
-	
-}
-
-# Write the final parts of the HTML page
-sub genHTMLReportEnd {
-    print RESULTSHTML <<END;
-<!-- INSERT IMAGES HERE - DO NOT DELETE THIS LINE -->
-</CENTER>
-<A NAME=EndSection></A>
-END
-
-    if ($params{SYSCONFIG}) {
-	print RESULTSHTML "<HR WIDTH=\"100%\">";
-	print RESULTSHTML "<CENTER><H2>Details</H2></CENTER>\n";
-	if (($params{SYSCONFIG} =~ m/^\S+$/o)
-	    && (open(SCFILE, "<$params{SYSCONFIG}"))) { # see if its a file
-	    while (<SCFILE>) {
-		print RESULTSHTML $_;
-	    }
-	    close(SCFILE);
-	} else {		# output text directly
-	    my $l = $params{SYSCONFIG};
-	    $l =~ s/\\\n/\n/g;	# turn quoted newline to plain newline
-	    print RESULTSHTML $l;
-	}
-    }
-
-    print RESULTSHTML <<END;
-
-<HR NOSHADE WIDTH="100%">
-
-</BODY>
-</HTML>
-END
-    close(RESULTSHTML);
-}
-
-
-# Actually generate the standard stuff
-setupTotals();
-genTextReport();
-
-
-genHTMLReportStart();
-
-my $graphCount = 0;
-foreach $section (@workload) {
-    next unless ($section->{sectionTitle} =~ /GRAPH/i);
-    my $name = $section->{sectionParams};
-    $name =~ s/name=\s*//;	# strip off initial bit
-    my @varlist = split (/[\s,]+/, $section->{VARIABLES});
-
-    $graphCount++;
-    genHTMLReportGraph ($name, $section->{TITLE}, $section->{LABEL}, 
-			($section->{FIELD} =~ /Time/o)
-			? \@protocols : \@protocolsAll,
-			$section->{FIELD}, \@varlist);
-}
-
-if ($graphCount <= 0) {		# use built ins
-
-# generate the graphs we want
-# NOTE: the first argument (name), must be unique; sets file name
-    genHTMLReportGraph ("connects",
-			"Number of connections attempted", "Connections/sec",
-			\@protocolsAll, "Try", ["conn" ]);
-    genHTMLReportGraph ("connections",
-			"Total connections", "Connections",
-			\@protocolsAll, "", ["connections" ]);
-    genHTMLReportGraph ("errors",
-			"Number of connection errors", "Errors/sec",
-			\@protocolsAll, "Error", ["conn", "banner", "login", "logout" ]);
-    genHTMLReportGraph ("retrieves",
-			"Number of messages read", "Messages/sec",
-			\@protocolsAll, "Try", ["retrieve" ]);
-    genHTMLReportGraph ("submits",
-			"Number of messages written", "Messages/sec",
-			\@protocolsAll, "Try", ["submit" ]);
-    genHTMLReportGraph ("commands",
-			"Protocol commands", "Commands/sec",
-			\@protocolsAll, "Try", ["cmd" ]);
-    genHTMLReportGraph ("readBytes",
-			"Bytes read", "Bytes/sec",
-			\@protocolsAll, "BytesR", ["login", "banner", "cmd", "retrieve", "submit", "logout" ]);
-    genHTMLReportGraph ("writeBytes",
-			"Bytes written", "Bytes/sec",
-			\@protocolsAll, "BytesW", ["login", "banner", "cmd", "retrieve", "submit", "logout" ]);
-    genHTMLReportGraph ("msgTime",
-			"Message transfer time", "Seconds per message",
-			\@protocols, "Time", ["cmd", "submit", "retrieve" ]);
-    genHTMLReportGraph ("setupTime",
-			"Connection setup time", "Seconds per connection",
-			\@protocols, "Time", ["conn", "banner", "login" ]);
-    genHTMLReportGraph ("blocks",
-			"Number of mailstone blocks executed", "Blocks/sec",
-			\@protocolsAll, "", ["blocks" ]);
-}
-
-if ($params{ADDGRAPHS}) {	# pick up additional graphs
-    my @graphs = ();
-    readWorkloadFile ($params{ADDGRAPHS}, \@graphs);
-    foreach $section (@graphs) {
-	next unless ($section->{sectionTitle} =~ /GRAPH/i);
-	my $name = $section->{sectionParams};
-	$name =~ s/name=\s*//;	# strip off initial bit
-	my @varlist = split (/[\s,]+/, $section->{VARIABLES});
-
-	$graphCount++;
-	genHTMLReportGraph ($name, $section->{TITLE}, $section->{LABEL}, 
-			    ($section->{FIELD} =~ /Time/o)
-			    ? \@protocols : \@protocolsAll,
-			    $section->{FIELD}, \@varlist);
-    }
-}
-
-
-genHTMLReportEnd();
-
-return 1;

mozilla/mstone/bin/series_utils.ksh

@@ -1,205 +0,0 @@
-#!/bin/ksh
-
-# global configuration parameters.
-# Fill in defaults for anything that is not already set
-
-# Look for testname$test_form, first
-export test_form=${test_form:-""}
-
-# string appended to every description
-export desc_conf=${desc_conf:-""}
-
-# extra arguments common to all tests
-export extra_args=${extra_args:-""}
-
-# error limit to abort sequence
-export error_limit=${error_limit:-100}
-
-# set this to only show what it will do
-export only_show_it=${only_show_it:-0}
-
-# time to allow the server to calm down after each run
-export sleep_time=${sleep_time:-5}
-
-# This is where we store the important runs
-export save_dir=${save_dir:-"results.save"}
-
-# Basic sanity test
-if [[ ! -x /usr/bin/perl || ! -f .license ]] ; then # see if setup was ever run
-   echo "Critical files are missing.  Run setup."
-   exit 2;
-fi
-
-find_timestamp () {		# find the timestamp string from latest run
-  #OLD timestamp=`ls -d results/[0-9]*.[0-9][0-9][0-9][0-9]?(a-z) | tail -1`
-
-  # list all directories with the timestamp pattern
-  timestamp=`echo results/[0-9]*.[0-9][0-9][0-9][0-9]?([a-z])`
-  # strip all but the last one
-  timestamp=${timestamp##* }
-
-  # strip the top directory name out
-  timestamp=${timestamp#results/}
-
-  # return it
-  echo $timestamp
-  return 0
-}
-
-
-# copy last mailstone run from the current directory to good results directory
-save_run () {
-
-  [[ -d $save_dir ]] || \
-	mkdir $save_dir
-
-  [[ $only_show_it -gt 0 ]] && return 0	# dont do anything important
-
-  if [[ -n "$last_timestamp" && -d "results/$last_timestamp/" ]] ; then
-	cp -pR results/$last_timestamp $save_dir/
-	# index probably has lots of extra junk, but its better than nothing
-	cp -pf results/index.html $save_dir/
-  fi
-}
-
-# Display and run a command.  Skip if in only_show mode.
-run () {
-  if [[ $only_show_it -gt 0 ]] ; then
-	echo  "Would run:" "$@"
-	return 0
-  fi
-  echo "Running: " "$@"
-  "$@"
-}
-
-# Sleep.  Skip if in only_show mode.
-run_sleep () {
-  if [[ $only_show_it -gt 0 ]] ; then
-	echo  "Would sleep:" "$@"
-	return 0
-  fi
-  echo "Sleeping: " "$@"
-  sleep "$@"
-}
-# for readability, just use sleep
-alias sleep=run_sleep
-
-
-# This runs the actual mstone run and check for errors
-# compress tmp files
-# Usage: run_test testname description [args...]
-run_test () {
-  testname="$1"; shift;
-  desc="$1"; shift;
-
-  # see if a special version of this test exists
-  if [[ -f conf/$testname$test_form.wld ]] ; then
-	testname=$testname$test_form
-  fi
-
-  #oldtimestamp=`find_timestamp`
-
-  if [[ $only_show_it -gt 0 ]] ; then
-	echo  "Would run:" mstone $testname -b "$desc $desc_conf" $extra_args "$@"
-	if [[ ! -f conf/$testname.wld ]] ; then
-	  echo "Configuration Error: No such test $testname"
-	fi
-	return 0
-  fi
-
-  echo "\n##########################################################"
-  if [[ ! -f conf/$testname.wld ]] ; then
-    echo "CONFIGURATION ERROR: No such test $testname"
-    exit 2
-  fi
-
-  echo  "\nRunning:" mstone $testname -b "$desc $desc_conf" $extra_args "$@"
-  # We actually bypass the mstone script
-  /usr/bin/perl -Ibin -- bin/mailmaster.pl -w conf/$testname.wld  -b "$desc $desc_conf" $extra_args "$@"
-  stat=$?
-
-  # BUG if another test is running at the same time, this is wrong
-  timestamp="`find_timestamp`"
-
-  # test failed to even run
-  if [[ $stat -ne 0 ]]
-  then
-	echo "ABORT! Test failed to start"
-        [[ -n "$mail_list" ]] && \
-	    mail_series "DotCom Failed run: `date`" "$mail_list"
-	exit 2
-  fi
-
-  # compress tmp files.  get the csv files, too.
-  gzip tmp/$timestamp/* results/$timestamp/*.csv
-
-  # stick the timestamp someplace global for a save_run
-  export last_timestamp=$timestamp
-  export all_timestamps="$all_timestamps $timestamp"
-
-  # save the results
-  save_run
-
-  # see how many errors we hit
-  totline=`grep 'Total:total ' results/$timestamp/results.txt`
-
-  # strip label and first field
-  errors=${totline##+([+-z])+( )+([+-9])+( )}
-  # strip trailing fields
-  errors=${errors%% *}
-
-  echo ""			# space things out
-
-  if [[ $errors -gt $error_limit ]] ; then
-	echo "ABORT! Errors ($errors) exceed error limit ($error_limit)"
-        [[ -n "$mail_list" ]] && \
-	    mail_series "DotCom Aborted run: `date`" "$mail_list"
-	exit 1
-  fi
-  echo "Run completed OK ($errors errors).  Timestamp $timestamp"
-
-  sleep $sleep_time
-
-  return 0
-}
-
-# Usage: mail_series subject "address,address,..."
-mail_series () {
-  subject=$1; shift
-  file=/tmp/series$$.tar
-
-  if [[ $only_show_it -gt 0 ]] ; then
-	echo  "Would mail results about $subject" to "$@"
-	return 0
-  fi
-  echo "Mailing results about $subject" to "$@"
-
-  tar cf $file $save_dir/index.html
-  for f in $all_timestamps ; do
-      tar rf $file $save_dir/$f
-  done
-  gzip $file
-  echo "$all_timestamps" | uuenview -b -30000 -s "$subject" -m "$@" $file.gz
-  rm -f $file.gz
-}
-
-# parse command line arguments
-while [[ -n "$1" ]]
-do
-  case $1 in
-  # -n mode, do not execute, just show
-  -n)	only_show_it=1; shift;;
-
-  # set test form
-  -f)	shift; test_form=$1; shift;;
-
-  # set test extra description
-  -d)	shift; desc_conf=$1; shift;;
-
-  # Rest are to be passed in exactly
-  --)	shift; break;;
-
-  #default, pick up as an extra arg
-  *)	extra_args="$extra_args $1"; shift;;
-  esac
-done

mozilla/mstone/bin/setup.pl

@@ -1,464 +0,0 @@
-#!/usr/bin/env perl
-# The contents of this file are subject to the Netscape Public
-# License Version 1.1 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.mozilla.org/NPL/
-# 
-# Software distributed under the License is distributed on an "AS
-# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-# implied. See the License for the specific language governing
-# rights and limitations under the License.
-# 
-# The Original Code is the Netscape Mailstone utility, 
-# released March 17, 2000.
-# 
-# The Initial Developer of the Original Code is Netscape
-# Communications Corporation. Portions created by Netscape are
-# Copyright (C) 1999-2000 Netscape Communications Corporation. All
-# Rights Reserved.
-# 
-# Contributor(s):	Dan Christian <robodan@netscape.com>
-#			Marcel DePaolis <marcel@netcape.com>
-#			Jim Salter <jsalter@netscape.com>
-# 
-# Alternatively, the contents of this file may be used under the
-# terms of the GNU Public License (the "GPL"), in which case the
-# provisions of the GPL are applicable instead of those above.
-# If you wish to allow use of your version of this file only
-# under the terms of the GPL and not to allow others to use your
-# version of this file under the NPL, indicate your decision by
-# deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL.  If you do not delete
-# the provisions above, a recipient may use your version of this
-# file under either the NPL or the GPL.
-#####################################################
-
-# usage: setup.pl setup|cleanup|checktime|timesync -m machine_file
-# message files are expected to be in ./data/ and end with ".msg"
-
-print "Netscape Mailstone.\nCopyright (c) 1997-2000 Netscape Communications Corp.\n";
-
-$mode = shift;			# mode must be first
-
-# this parses the command line for -m machinefile
-# also sets many defaults
-do 'args.pl'|| die $@;
-sub warn_system;
-sub die_system;
-
-parseArgs();			# parse command line
-
-setConfigDefaults();		# setup RSH and RCP
-
-$cpcmd = "cp";			# copy files... dir
-$rmcmd = "rm -f";		# remove files...
-
-die "Must specify workload file" unless (@workload);
-
-# Add or change client machines
-sub configClients {
-    print "\n    You can enter multiple machines like this: host1,host2\n";
-    my @d = <bin/*/bin>;
-    if (@d) {
-	my @d2;
-	foreach (@d2 = @d) { s/^bin\/// }
-	foreach (@d = @d2) { s/\/bin$// }
-	print "    These OS versions are available:\n@d\n";
-    }
-
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	my $arch = "default OS";
-	$arch = $section->{ARCH} if ($section->{ARCH});
-	print "\nWhat is the name of the client(s) for $arch [$slist]: ";
-	my $ans = <STDIN>; chomp $ans;
-	if ($ans) {
-	    $ans =~ s/\s//g;	# strip any whitespace
-	    fileReplaceText ($params{WORKLOAD}, "<CLIENT", $slist, $ans);
-	}
-    }
-    while (1) {
-	print "\nWhat additional client(s) [none]: ";
-	my $ans = <STDIN>; chomp $ans;
-	last unless ($ans);	# done
-	last if ($ans =~ /^none$/i);
-	$ans =~ s/\s//g;	# strip any whitespace
-	my $block = "\n<CLIENT HOSTS=$ans>\n";
-
-	print "What OS type [default]: ";
-	my $ans = <STDIN>; chomp $ans;
-	$block .= "  Arch\t$ans\n" if ($ans && !($ans =~ /^default$/i));
-
-	$block .= "</CLIENT>\n";
-	fileInsertAfter ($params{WORKLOAD}, "^</CLIENT>", $block);
-    }
-}
-
-# Create a user ldif file
-sub configUserLdif {
-    my $name = "conf/$defaultSection->{SERVER}.ldif";
-    print "\nWhat file to you want to create [$name]? ";
-    $ans = <STDIN>; chomp $ans;
-    $name = $ans if ($ans);
-
-    my $mode = "users";
-    print "\nDo you want to create a broadcast account [y]? ";
-    $ans = <STDIN>;
-    $mode .= " broadcast" unless ($ans =~ /^n/i);
-
-    my $basedn = $defaultSection->{SERVER};	# pick a default
-    $basedn =~ s/^.*?\.//;	# strip off before first dot
-    $basedn = "o=$basedn";
-
-    print "\nWhat is LDAP base DN [$basedn]? ";
-    $ans = <STDIN>; chomp $ans;
-    $basedn = $ans if ($ans);
-
-    my $args = $params{MAKEUSERSARGS};
-
-    print "\n    Common additional makeusers arguments:\n";
-    print "\t-s storeName -x storeCount \tMultiple store partitions\n";
-    print "\t[-3|-4]                    \tConfigure for NSMS 3.x or 4.x\n";
-    print "Any extra arguments to makeusers [$args]? ";
-    $ans = <STDIN>; chomp $ans;
-    $args = $ans if ($ans);
-
-    my $perlbin = "/usr/bin/perl";
-
-    $params{DEBUG} &&
-	print "$perlbin -Ibin -- bin/makeusers.pl $mode -w $params{WORKLOAD} -b '$basedn' -o $name $args\n";
-
-    print "\nGenerating $name (this can take a while)\n";
-    warn_system "$perlbin -Ibin -- bin/makeusers.pl $mode -w $params{WORKLOAD} -b '$basedn' -o $name $args";
-    print "LDIF generation complete.  See $name\n";
-    print "\tSee the manual or INSTALL to create users using the LDIF file.\n";
-}
-
-# This uses a match pattern plus text to text replacements.  
-# Could make all changes and then write out new workload
-# 	You would have to be carefull about sections with multi-line support.
-sub configWorkload {
-    my $ans;
-
-    print "\nWhat is the name of the mail host [$defaultSection->{SERVER}]: ";
-    $ans = <STDIN>; chomp $ans;
-    if ($ans) {
-	fileReplaceText ($params{WORKLOAD},
-			 "(SERVER|SMTPMAILFROM|ADDRESSFORMAT)", 
-			 $defaultSection->{SERVER}, $ans);
-	$defaultSection->{SERVER} = $ans; # needed for ldif generation
-    }
-    print "\nWhat is the user name pattern [$defaultSection->{LOGINFORMAT}]: ";
-    $ans = <STDIN>; chomp $ans;
-    if ($ans) {
-	fileReplaceText ($params{WORKLOAD},
-			 "(LOGINFORMAT|ADDRESSFORMAT)",
-			 $defaultSection->{LOGINFORMAT}, $ans);
-	$ans =~ s/%ld/0/;	# create smtpMailFrom user
-	my $olduser = $defaultSection->{SMTPMAILFROM};
-	$olduser =~ s/@.*$//;	# strip off after @
-	fileReplaceText ($params{WORKLOAD},
-			 "SMTPMAILFROM",
-			 $olduser, $ans);
-    }
-
-    print "\nWhat is the password pattern [$defaultSection->{PASSWDFORMAT}]: ";
-    $ans = <STDIN>; chomp $ans;
-    fileReplaceText ($params{WORKLOAD}, "PASSWDFORMAT", 
-		     $defaultSection->{PASSWDFORMAT}, $ans);
-
-    $defaultSection->{NUMLOGINS} = 100 unless ($defaultSection->{NUMLOGINS});
-    print "\nHow many users [$defaultSection->{NUMLOGINS}]: ";
-    $ans = <STDIN>; chomp $ans;
-    fileReplaceText ($params{WORKLOAD}, "(NUMADDRESSES|NUMLOGINS)",
-		     $defaultSection->{NUMLOGINS}, $ans);
-
-    $defaultSection->{FIRSTLOGIN} = 0 unless ($defaultSection->{FIRSTLOGIN});
-    print "\nWhat is the first user number [$defaultSection->{FIRSTLOGIN}]: ";
-    $ans = <STDIN>; chomp $ans;
-    fileReplaceText ($params{WORKLOAD}, "(FIRSTADDRESS|FIRSTLOGIN)",
-		     $defaultSection->{FIRSTLOGIN}, $ans);
-
-    unless ($params{NT}) {
-	configClients ();
-    }
-
-    print "\nDo you want to view the edited $params{WORKLOAD} [y]? ";
-    $ans = <STDIN>;
-    unless ($ans =~ /^n/i) {
-	print "Here is the edited $params{WORKLOAD}:\n\n";
-	fileShow ($params{WORKLOAD});
-	print "\n";
-    }
-
-    print "\nDo you want to generate a user LDIF file [y]? ";
-    $ans = <STDIN>;
-    unless ($ans =~ /^n/i) {
-	configUserLdif ();
-    }
-}
-
-# See if license file has been displayed
-if (($mode ne "cleanup") && (! -f ".license" )) {
-    fileShow ("LICENSE");
-    # SEAN: blow off annoying agreement message.
-#      print "\nDo you agree to the terms of the license? (yes/no) ";
-#      my $ans = <STDIN>;
-#      print "\n";
-#      unless ($ans =~ /^yes$/i) {
-#  	print "License not agreed to.\n";
-#  	exit 0;
-#      }
-    my ($sec, $min, $hour, $mday, $mon, $year) = localtime;
-    open (LIC, ">.license");
-    printf LIC "%04d$mon$mday$hour$min\n", $year+1900;
-    close (LIC);
-}
-
-if ($mode eq "config") {	# re-run config
-    configWorkload ();
-
-    print "\nMake any additional changes to $params{WORKLOAD} and then re-run 'setup'\n";
-    exit 0;
-} elsif ($mode ne "cleanup") {	# check if configured
-    my $unconf = 0; # see if default values are in use
-    foreach $section (@workload) {
-	($section->{SERVER})
-	    && ($section->{SERVER} =~ /example\.com$/)
-		&& $unconf++;
-	($section->{SMTPMAILFROM})
-	    && ($section->{SMTPMAILFROM} =~ /example\.com$/)
-		&& $unconf++;
-	($section->{ADDRESSFORMAT})
-	    && ($section->{ADDRESSFORMAT} =~ /example\.com$/)
-		&& $unconf++;
-	last if ($unconf > 0);
-    }
-    if ($unconf > 0) {
-	print "Server has not been configured (example.com is an invalid address).\n";
-	print "Do you want to setup a simple configuration now [y]?";
-	my $ans = <STDIN>;
-	if ($ans =~ /^n/i) {
-	    print "Re-run setup when you have edited the configuration.\n";
-	    exit 0;
-	}
-	configWorkload ();
-
-	print "\nMake any additional changes to $params{WORKLOAD} and then re-run 'setup'\n";
-	exit 0;
-    }
-}
-
-if ($mode eq "timesync") {
-    if ($params{NT}) {
-	print "Timesync has no effect on NT\n";
-	exit 0;
-    }
-    my ($sec, $min, $hour, $mday, $mon, $year) = localtime;
-    $mon += 1;			# adjust from 0 based to std
-    $systime = sprintf ("%02d%02d%02d%02d%04d.%02d",
-		     $mon, $mday, $hour, $min, 1900+$year, $sec);
-} elsif ($mode eq "checktime") {
-    if ($params{NT}) {		# if running on NT, then only single client
-	print "Checktime not needed on NT\n";
-	exit 0;
-    }
-    mkdir ("$resultbase", 0775);
-    mkdir ("$tmpbase", 0775);
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	foreach $cli (split /[\s,]/, $slist) {
-	    open MAKEIT, ">$tmpbase/$cli.tim";
-	    close MAKEIT;
-	}
-    }
-} elsif (($mode eq "setup") || ($mode eq "cleanup")) {
-    @msgs = <data/*.msg>;
-    foreach (@files = @msgs) { s/data\/// }
-    print "Found these message files:\n@files\n\n";
-    if ($params{NT}) {		# handle NT localhost here
-	exit 0 if ($mode =~ /cleanup$/);
-	my $clipath = "bin/WINNT4.0/bin/mailclient.exe";
-	print "Copying $clipath and message files to $cli\n";
-	die_system "copy $clipath $params{TEMPDIR}";
-	foreach $f (@files) {
-	    die_system "copy $f $params{TEMPDIR}";
-	}
-	exit 0;			# without perl:fork, no more to do
-    }
-}
-
-# iterate over every client in the testbed, complete the cmd and rsh
-foreach $section (@workload) {
-    next unless ($section->{sectionTitle} =~ /CLIENT/i);
-    my $slist = $section->{sectionParams};
-    $slist =~ s/HOSTS=\s*//; # strip off initial bit
-    foreach $cli (split /[\s,]/, $slist) {
-	my $rsh = ($section->{RSH}) ? $section->{RSH} : $params{RSH};
-	my $rcp = ($section->{RCP}) ? $section->{RCP} : $params{RCP};
-	my $tempdir;
-	if ($section->{TEMPDIR}) {
-	    $tempdir = $section->{TEMPDIR};
-	} elsif ($params{TEMPDIR}) {
-	    $tempdir = $params{TEMPDIR};
-	}
-
-	my $cliarch = $section->{ARCH};
-
-	# presumed architecture for bin/mailclient on localhost:
-	my $local_arch = `bin/nsarch`;
-	chomp $local_arch;
-
-	# Try to determine arch if it hasn't been explicitly set.
-	if (!$cliarch) {
-	    if ($cli =~ /localhost/) {
-		$cliarch = `bin/nsarch`;
-		chomp $cliarch;
-	    } else {
-		$cliarch = `$rsh $cli sh < bin/nsarch`;
-		chomp $cliarch;
-	    }
-	}
-
-	# most time critical first
-	if ($mode eq "timesync") {
-	    next if ($cli =~ /^localhost$/i); # dont reset our own time
-	    # run all these in parallel to minimize skew
-	    next if ($cliarch eq "NT4.0");
-	    forkproc ($rsh, $cli, "date $systime");
-	}
-
-	elsif ($mode eq "checktime") {
-	    # run all these in parallel to minimize skew
-	    forkproc ($rsh, $cli, ($cliarch eq "NT4.0")
-		      ? "time" : "date",
-		      "/dev/null", "$tmpbase/$cli.tim");
-	}
-
-	elsif ($mode eq "setup") {
-	    my ($clibin) = split /\s/, (($section->{COMMAND})
-					? $section->{COMMAND}
-					: $params{CLIENTCOMMAND});
-	    my $clipath = '';	# do nothing by default
-
-	    # Look for architecture-specific binary.
-	    if ($cliarch) {
-
-		# fallback to just os-name if we can't find an exact match.
-		my $approx = $cliarch;
-		$approx =~ s/^(\D+).*/$1/;
-		my $approx_bin = <"bin/${approx}*/bin/$clibin">;
-
-		if (-x "bin/$cliarch/bin/$clibin") {
-		    # exact match.
-		    $clipath = "bin/$cliarch/bin/$clibin";
-		} elsif (-x $approx_bin) {
-		    # approximate match
-		    $clipath = $approx_bin;
-		} elsif ($local_arch =~ /^$approx/) {
-		    # same arch as localhost
-		    $clipath = "bin/mailclient";
-		} else {
-		    print STDERR
-			"Requested OS $cliarch for $cli not found.  ",
-			"Not copying binary.\n";
-		}
-	    } else {
-		# arch not found
-		print STDERR "Cannot determine architecture for $cli.  ",
-		"Not copying binary.\n";
-	    }
-	    # See if we have anything to copy:
-	    if ("$clipath @files" !~ /\S/) {
-		print STDERR "Nothing to copy to $cli.  Skipping.\n";
-		next;
-	    }
-	    my $rdir = ($tempdir) ?  "$tempdir/" : ".";
-	    # chmod so that the remote files can be easily cleaned up
-	    my $rcmd = "chmod g+w @files $clibin; uname -a";
-	    $rcmd = "cd $tempdir; " . $rcmd if ($tempdir);
-	    $rdir =~ s!/!\\!g if ($cliarch eq "NT4.0");
-	    if ($cli =~ /^localhost$/i) {
-		die "TEMPDIR must be set for 'localhost'\n"
-		    unless ($tempdir);
-		die "Invalid local NT copy.  Should never get here.\n"
-		    if ($cliarch eq "NT4.0"); # should never happen
-		print "Copying $clipath and message files to $rdir\n";
-		die_system ("$cpcmd @msgs $clipath $rdir");
-		die_system ($rcmd);
-	    } else {
-		print "$rcp $clipath @msgs $cli:$rdir\n" if ($params{DEBUG});
-		print "Copying $clipath and message files to $cli:$rdir\n";
-		warn_system (split (/\s+/, $rcp), $clipath, @msgs, "$cli:$rdir");
-		next if ($cliarch eq "NT4.0"); # chmod not valid
-		print "rcmd='$rcmd'\n" if ($params{DEBUG});
-		die_system (split (/\s+/, $rsh), $cli, $rcmd);
-	    }
-	    print "\n";
-	}
-
-	elsif ($mode eq "cleanup") {
-	    if ($params{DEBUG}) {	# get debug files
-		print "Cleaning up debug files on $cli\n";
-		my $rcmd = ($cliarch eq "NT4.0") ? "DEL" : "$rmcmd";
-		$rmcmd .= " mstone-debug.[0-9]*";
-		$rcmd = "cd $tempdir; " . $rcmd if ($tempdir);
-		$rcmd =~ s/;/&&/g if ($cliarch eq "NT4.0");
-		if ($cli =~ /^localhost$/i) {
-		    die "TEMPDIR must be set for 'localhost'\n"
-			unless ($tempdir);
-		    warn_system ($rcmd);
-		} else {
-		    warn_system (split (/\s+/, $rsh), $cli, $rcmd);
-		}
-	    } else {
-		print "Cleaning $cli\n";
-		my $rcmd = ($cliarch eq "NT4.0") ? "DEL" : "$rmcmd";
-		$rcmd .= " $clibin @files";
-		$rcmd = "cd $tempdir; " . $rcmd if ($tempdir);
-		$rcmd =~ s/;/&&/g if ($cliarch eq "NT4.0");
-		if ($cli =~ /^localhost$/i) {
-		    die "TEMPDIR must be set for 'localhost'\n"
-			unless ($tempdir);
-		    warn_system ($rcmd);
-		} else {
-		    warn_system (split (/\s+/, $rsh), $cli, $rcmd);
-		}
-	    }
-	}
-
-	else {
-	    die "Couldn't recognize mode $mode!\n";
-	}
-    }
-}
-
-# wait for children to finish
-if (($mode eq "timesync") || ($mode eq "checktime")) {
-    $pid = wait();
-    while ($pid != -1) {
-	$pid = wait();
-    }
-}
-
-# Print the results of the time checks
-if ($mode eq "checktime") {
-    print "Time from each client:\n";
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	my $slist = $section->{sectionParams};
-	$slist =~ s/HOSTS=\s*//; # strip off initial bit
-	foreach $cli (split /[\s,]/, $slist) {
-	    open TIMEFILE, "$tmpbase/$cli.tim"
-		|| warn "Counldn't open $tmpbase/$cli.tim\n";
-	    printf "%32s: ", $cli;
-	    while (<TIMEFILE>) { print; last;} # single line (2 on NT)
-	    close(TIMEFILE);
-	    unlink "$tmpbase/$cli.tim";
-	}
-    }
-}

mozilla/mstone/bin/smtpsink.pl

@@ -1,280 +0,0 @@
-/*
- * The contents of this file are subject to the Netscape Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/NPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is the Netscape Mailstone utility,
- * released March 17, 2000.
- *
- * The Initial Developer of the Original Code is Netscape
- * Communications Corporation. Portions created by Netscape are
- * Copyright (C) 1999-2000 Netscape Communications Corporation. All
- * Rights Reserved.
- *
- * Contributor(s):     Sean O'Rourke <sean@sendmail.com>
- *                     Thom O'Connor <thom@sendmail.com>
- *                     Sendmail, Inc.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU Public License Version 2 or later (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of
- * those above.  If you wish to allow use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the NPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the NPL or the GPL.
- */
-
-use Thread qw(async);
-use FileHandle qw(_IOLBF);
-use Socket;
-use strict;
-use Getopt::Long;
-
-# options
-my $maxconn = SOMAXCONN;
-my $t_banner = 0;
-my $t_from = 0;
-my $t_rcpt = 0;
-my $t_dot = 0;
-my $port = 25;
-my $cs = '';
-my $log = '';
-my $proto = getprotobyname('tcp');
-
-# statistics
-my ($cmds, $errs, $bytesw, $bytesr, $msgs);
-
-GetOptions('maxconn:i'		=> \$maxconn,
-	   'banner-delay:i'	=> \$t_banner,
-	   'from-delay:i'	=> \$t_from,
-	   'rcpt-delay:i'	=> \$t_rcpt,
-	   'dot-delay:i'	=> \$t_dot,
-	   'log:s'		=> \$log,
-	   'checksums:s'	=> sub { use Digest::MD5; $cs = $_[0]; })
-    || &usage;
-
-if (@ARGV == 1) {
-    ($port) = @ARGV;
-}
-
-if ($log) {
-    if (open(LOG, ">$log")) {
-	print STDERR "Logging messages to $log\n";
-    } else {
-	warn ("Cannot open logfile $log\n");
-	$log = '';
-    }
-}
-
-socket(S, PF_INET, SOCK_STREAM, $proto) || die $!;
-setsockopt(S, SOL_SOCKET, SO_REUSEADDR, pack("l", 1)) || die $!;
-
-(bind(S, sockaddr_in($port, INADDR_ANY))
- && listen(S, $maxconn))
-    || die $!;
-
-my $addr;
-my $fh = new FileHandle;
-my $cnt = 0;
-
-$SIG{INT} = sub { close(LOG); print STDERR "done\n"; exit 0; };
-
-while(my $addr = accept($fh, S)) {
-    if (++$cnt % 100 == 0) {
-	print STDERR "$cnt\r";
-    }
-    my $thr = async { do_smtp($addr, $fh); };
-    $thr->join;
-    $fh = new FileHandle;
-}
-
-sub usage
-{
-    print STDERR <<EOS;
-Usage: $0 [options] [port]
-EOS
-    exit -1;
-}
-
-sub netline
-{
-    my $fh = shift;
-    my $line = $fh->getline;
-    $line =~ s/\r\n$// if $line;
-    $line;
-}
-
-sub millisleep
-{
-    my $t = shift;
-    select(undef, undef, undef, $t) if $t > 0;
-}
-
-sub netprint($@)
-{
-    my ($fh, @stuff) = @_;
-    foreach (@_) {
-	s/([^\r])\n/$1\r\n/g;
-	$fh->print($_);
-    }
-}
-
-sub do_smtp
-{
-    my ($addr, $s) = @_;
-    my $buf;
-    my ($port, $iaddr) = sockaddr_in($addr);
-    my $name = gethostbyaddr($iaddr, AF_INET);
-    $s->setvbuf($buf, _IOLBF, 1024);
-
-    millisleep($t_banner);
-    $s->print("220 wazzup, bro?\r\n");
-    my %state = ('conn'		=> $s,
-		 'host'		=> $name);
-    my %funcs = ('helo'		=> \&do_helo,
-		 'ehlo'		=> \&do_helo,
-		 'word'		=> \&do_helo,
-
-		 'quit'		=> \&do_quit,
-		 'latr'		=> \&do_quit,
-
-		 'mail'		=> \&do_from,
-		 'rcpt'		=> \&do_rcpt,
-		 'data'		=> \&do_data,
-		 'rset'		=> \&do_ok,
-		 'vrfy'		=> \&do_ok,
-		 'noop'		=> \&do_ok,
-		);
-    while (my $line = netline($s))
-    {
-	my ($cmd, $arg) = ($line =~ /^\s*(\S+)\s*(.*)$/);
-	die "cmd = `$cmd'" unless ($cmd = lc($cmd));
-	# fail 1% of commands
-	if ($funcs{$cmd}) {
-	    &{$funcs{$cmd}}(\%state, $cmd, $arg, \%funcs);
-	} else {
-	    $s->print("500 5.0.0 no.  Just... no.\r\n");
-	}
-    }
-    return 0;
-}
-
-sub already_said_that
-{
-    my ($state, $cmd, $arg) = @_;
-    $state->{conn}->print("503 5.0.0 Dude, you already said that.\r\n");
-}
-
-sub do_helo
-{
-    my ($state, $cmd, $arg) = @_;
-    $state->{helohost} = $arg;
-    die unless $cmd;
-    if ($cmd eq 'helo') {
-	if ($arg eq $state->{host}) {
-	    $state->{conn}->print("221 hello Mr. Honest\r\n");
-	} else {
-	    $state->{conn}->print("221 We know where you live, $state->{iaddr}\r\n");
-	}
-    } elsif ($cmd eq 'ehlo') {
-	my $esmtp = <<EOS;
-250-localhost is pleased to make your acquaintance, and offers:
-250 8bitmime
-EOS
-	if ($arg) {
-	    netprint($state->{conn}, $esmtp);
-	} else {
-	    $state->{conn}->print("501 5.0.0 tell me more...\r\n");
-	    return;
-	}
-    } else {
-	$state->{conn}->print("221 2.0.0 peace brother\r\n");
-    }
-}
-
-sub do_quit
-{
-    my ($state, $cmd) = @_;
-    $state->{conn}->print( "221 2.0.0 drop in any time\r\n");
-    close ($state->{conn});
-}
-
-sub do_from
-{
-    my ($state, $cmd, $args, $funcs) = @_;
-    millisleep($t_from);
-    $state->{conn}->print( "250 2.1.0 Okay, keep talking\r\n");
-    $funcs->{rcpt} = \&do_rcpt;
-}
-
-sub do_rcpt
-{
-    my ($state, $cmd, $args, $funcs) = @_;
-    my ($rcpt) = ($args =~ /to\:\s*(.+)/i);
-    millisleep($t_rcpt);
-    $state->{conn}->print("250 2.1.5 ${rcpt}'s cool\r\n");
-    $funcs->{data} = \&do_data;
-}
-
-sub do_data
-{
-    my ($state, $cmd, $args, $funcs) = @_;
-    $state->{conn}->print( "354 up to the dot...\r\n");
-    if ($cs) {
-	my $line;
-	my $md5 = Digest::MD5->new;
-	# skip headers
-    header: while ($_ = netline($state->{conn})) {
-	    last header if /^$/;
-	    last body if /^\.$/;
-	}
-
-    body: while ($_ = $state->{conn}->getline) {
-	    if (/^=CS=MD5=(.+)\r/) {
-		my $sum = $1;
-		my $end = netline($state->{conn});
-
-		if ($end ne '.') {
-		    print STDERR "Fake checksum?: $sum\n";
-		    while (netline($state->{conn}) ne '.') { }
-		} elsif (lc($sum) eq lc($md5->hexdigest)) {
-#  		    print STDERR "MD5 sum OK.\n";
-		} else {
-		    print STDERR "MD5 sum mismatch: $sum, ",
-			$md5->hexdigest, "\n";
-		}
-		last body;
-	    } elsif (/^\.\r$/) {
-  		print STDERR "no checksum\n" if $cs =~ /^r/;
-		last body;
-	    }
-	    print LOG $_ if $log;
-	    $md5->add($_);
-	}
-	print LOG ".\r\n" if $log;
-    } else {
-	local ($/) = "\r\n.\r\n";
-	$state->{conn}->getline;
-    }
-    millisleep($t_dot);
-    if (rand() % 100 == 0) {
-	$state->{conn}->print("451 ohshit\r\n");
-    } else {
-	$state->{conn}->print("250 2.0.0 I will deliver\r\n");
-    }
-}
-
-sub do_ok
-{
-    my ($state) = @_;
-    $state->{conn}->print("220 uhhuh\r\n");
-}

mozilla/mstone/bin/util.pl

@@ -1,825 +0,0 @@
-# util.pl -- utilities which used to live in bin/args.pl
-
-sub my_system {
-    my ($file, $line);
-    $file = shift;
-    $line = shift;
-    my $ret;
-    if (($ret = system(@_)) != 0) {
-	my $msg = "$file:$line: @_\n\t";
-	my ($excode, $sig, $cored) = ($ret >> 8, $ret & 127, $ret & 128);
-	if ($sig) {
-	    $msg .= "died with signal $sig";
-	    $msg .= ' (core dumped)' if ($cored);
-	    $msg .= "\n";
-	} else {
-	    $msg .= "exited abnormally with code $excode\n";
-	}
-	return $msg;
-    }
-    undef;
-}
-
-sub warn_system {
-    my ($pack, $file, $line) = caller;
-    my $msg = my_system($file, $line, @_);
-    warn $msg if $msg;
-}
-
-sub die_system {
-    my ($pack, $file, $line) = caller;
-    my $msg = my_system($file, $line, @_);
-    die $msg if $msg;
-}
-
-# Utility functions
-# Create a unique hash array. Programming Perl, 2nd edition, p291 (p217?)
-package ArrayInstance;
-sub new {
-    my $type = shift;
-    my %params = @_;
-    my $self = {};
-    return bless $self, $type;
-}
-
-package main;
-
-# run a command in the background, return its PID
-# Uses fork: will not run on NT in perl 5.004
-# if the server is "localhost", ignore the rcmd part
-# if stdin, stdout, and/or stderr is set, redirect those for the sub process
-sub forkproc {
-    my $rcmd = shift;
-    my $server = shift;
-    my $command = shift;
-    my $stdin = shift;
-    my $stdout = shift;
-    my $stderr = shift;
-
-    if (my $pid = fork()) {
-	return $pid;		# parent
-    }
-
-    # rest of this is in the child
-    if ($stdin) {		# redirect stdin if needed
-	close (STDIN);
-	open STDIN, "<$stdin"
-	    || die "Couldn't open $stdin for input\n";
-    }
-
-    if ($stdout) {		# redirect stdout if needed
-	close (STDOUT);
-	open STDOUT, ">>$stdout"
-	    || die "Couldn't open $stdout for output\n";
-    }
-
-    if ($stderr) {		# redirect stderr if needed
-	close (STDERR);
-	open STDERR, ">>$stderr"
-	    || die "Couldn't open $stderr for output\n";
-    }
-
-    if ($server =~ /^localhost$/i) {
-	exec $command;
-	die "Coundn't exec $command:$!\n";
-    } else {
-	exec split (/\s+/, $rcmd), $server, $command;
-	die "Coundn't exec $rcmd $server $command:$!\n";
-    } 
-}
-
-# Relocate file to tmp directory (if it is in the results directory),
-#  and put a ~ on the end of it.
-# ASSUMES tmp and results are on the same partition (on NT, same drive).
-# Usage: fileBackup (filename)
-sub fileBackup {
-    my $filename = shift;
-    my $bfile = $filename;
-
-    (-f $filename) || return 0;	# file doent exist
-    $bfile =~ s/$resultbase/$tmpbase/; # move to tmp
-    $bfile .= "~";		# indicate that this is a backup
-    (-f $bfile) && unlink ($bfile);
-    #print "Backing up $filename to $bfile\n"; # DEBUG
-    rename ($filename, $bfile) || unlink ($filename);
-}
-
-# Insert text into a file after a tagline
-# fileInsertAfter (filename, tagstring, newtext)
-sub fileInsertAfter {
-    my $filename = shift || die "fileInsertAfter: missing filename";
-    my $tagline = shift || die "fileInsertAfter: missing tagline";
-    my $newtext = shift || die "fileInsertAfter: missing text";
-    my $foundit = 0;
-
-    open(OLD, "<$filename") ||
-	open(OLD, "gunzip -c $filename |") ||
-	    die "fileInsertAfter: Could not open input $filename: $!";
-    open(NEW, ">$filename+") ||
-	die "fileInsertAfter: Could not open output $filename+: $!";
-
-    while (<OLD>) {
-	print NEW $_;		# copy (including tagline)
-
-	next unless (/$tagline/); # matched tagline
-
-	print NEW $newtext;	# insert new text
-	$foundit++;
-	last;			# only change first occurance
-    }
-
-    if ($foundit) {		# copy rest of file
-	while (<OLD>) {
-	    print NEW $_;
-	}
-    }
-
-    close (OLD);
-    close (NEW);
-    if ($foundit) {
-	fileBackup ($filename);
-	rename ("$filename+", "$filename");
-	#print "Updated $filename\n"; # DEBUG
-	return $foundit;
-    } else {
-	($params{DEBUG}) && print "No change to $filename\n"; # DEBUG
-	unlink ("$filename+");
-	return 0;
-    }
-}
-
-# Do text for text replacements in a file.
-# Perl wildcards are automatically quoted.
-# fileReplace (filename, matchPat, oldtext, newtext)
-sub fileReplaceText {
-    my $filename = shift || die "fileReplaceText: missing filename";
-    my $tagline = shift || die "fileReplaceText: missing tagline ($filename)";
-    my $oldtext = shift;
-    my $newtext = shift;
-    my $foundit = 0;
-
-    return if ($newtext eq "");	# nothing to do
-    return if ($oldtext eq "");	# nothing can be done
-
-    open(OLD, "<$filename") ||
-	open(OLD, "gunzip -c $filename |") ||
-	    die "fileReplaceText: Could not open input $filename: $!";
-    open(NEW, ">$filename+") ||
-	die "fileReplaceText: Could not open output $filename+: $!";
-
-    $oldtext =~ s/([][{}*+?^.\/])/\\$1/g; # quote regex syntax
-
-    while (<OLD>) {
-	if (/$tagline/i) { # matched tagline
-	    $foundit++;
-	    s/$oldtext/$newtext/; # do the replace
-	}
-	print NEW $_;
-    }
-
-    close (OLD);
-    close (NEW);
-    if ($foundit) {
-	fileBackup ($filename);
-	rename ("$filename+", "$filename");
-	#print "Updated $filename\n"; # DEBUG
-	return $foundit;
-    } else {
-	($params{DEBUG}) && print "No change to $filename\n"; # DEBUG
-	unlink ("$filename+");
-	return 0;
-    }
-}
-
-# copy a file to a new name.  Handles possible compression.  OS independent.
-# fileCopy (filename, newname)
-sub fileCopy {
-    my $filename = shift || die "fileReplaceText: missing filename";
-    my $newname = shift || die "fileReplaceText: missing newname ($filename)";
-
-    open(OLD, "<$filename") ||
-	open(OLD, "gunzip -c $filename |") ||
-	    die "fileReplaceText: Could not open input $filename: $!";
-    open(NEW, ">$newname") ||
-	die "fileReplaceText: Could not open output $newname: $!";
-
-    while (<OLD>) {		# copy it
-	print NEW $_;
-    }
-
-    close (OLD);
-    close (NEW);
-    return 0;
-}
-
-# display a file to STDOUT.  Handles possible compression
-sub fileShow {
-    my $filename = shift || die "fileShow: missing filename";
-    open(SHOWIT, "<$filename") ||
-	open(SHOWIT, "gunzip -c $filename.gz |") ||
-	    die "fileShow: Couldn't open $filename: $!";
-    while (<SHOWIT>) { print; }
-    close(SHOWIT);
-}
-
-# sub function to figure time extents
-# (start, end) = dataMinMax counterName \@protocols oldstarttime oldendtime
-# Use 0 for uninitialized start or end
-sub dataMinMax {
-    my $name = shift;
-    my $protos = shift;
-    my $start = shift;
-    my $end = shift;
-    
-    # make global
-    # create the plot script and data files
-    # Figure out the encompassing time extent
-    foreach $p (@$protos) {	# create the plot data files
-	my @times = sort numeric keys %{ $graphs{$p}->{$name}};
-	if ($#times <= 0) {
-	    next;
-	}
-	if (($start == 0) || ($times[0] < $start)) {
-	    $start = $times[0];
-	}
-	if (($end == 0) || ($times[0] > $end)) {
-	    $end = $times[$#times];
-	}
-    }
-    #printf ("Data $name start=$start end=$end (%d points)...\n",
-	#    $end - $start);
-    return ($start, $end);
-}
-
-# simple function to formatted a number into n, n K, n M, or n G
-sub kformat {
-    my $n = shift;
-    my $r = "";
-    if ($n > (1024*1024*1024)) {
-	$r = sprintf "%.2fG", $n / (1024*1024*1024);
-    } elsif ($n > (1024*1024)) {
-	$r = sprintf "%.2fM", $n / (1024*1024);
-    } elsif ($n > 1024) {
-	$r = sprintf "%.2fK", $n / 1024;
-    } else {
-	$r = sprintf "%d ", $n;
-    }
-    return $r;
-}
-
-# simple function to formatted a time into Ns, Nms, or Nus
-# the goal is to make a table of timss uncluttered and easy to read
-# I dont convert to minutes or hours because the non-1000x multipliers
-#   are hard to back solve in your head for comparisons
-sub tformat {
-    my $n = shift;
-    my $r = "";
-    if ($n == 0.0) {
-	$r = "0.0";		# make exactly 0 explicit
-    } elsif ($n < 0.001) {
-	$r = sprintf "%.2fus", $n * 1000 * 1000;
-    } elsif ($n < 1.0) {
-	$r = sprintf "%.2fms", $n * 1000;
-    } elsif ($n >= 1000.0) {
-	$r = sprintf "%.0fs", $n;
-    } elsif ($n >= 100.0) {
-	$r = sprintf "%.1fs", $n;
-    } else {
-	$r = sprintf "%.3fs", $n;
-    }
-    return $r;
-}
-
-#Usage: commify (1234567) returns 1,234,567
-sub commify {			# perl cookbook p64-65
-    my $text = reverse $_[0];
-    $text  =~ s/(\d\d\d)(?=\d)(?!\d*\.)/$1,/g;
-    return scalar reverse $text;
-}
-
-# subroutine to enable numeric sorts.  Programming Perl p218
-# Use: sort numeric ...
-sub numeric { $a <=> $b; }
-
-# on NT, turn slash to backslash, then print.  Else print.
-sub pathprint {
-    my $str = shift;
-    $str =~ s!/!\\!g if ($params{NT});	# turn slash to back slash
-    print $str;
-}
-    
-# figureTimeNumber number
-# Given an number like: 60m, 1h, 100s, 4d, 200
-# Return 60, 1, 100, 4, 200
-sub figureTimeNumber {
-    my $arg = shift;
-
-    ($arg =~ /([0-9]+)(s|sec|second|seconds|m|min|minute|minutes|h|hr|hour|hours|d|day|days)$/i)
-	&& return $1;
-    return $arg;			# return default
-}
-
-# figureTimeUnits number, default
-# Given an number like: 60m, 1h, 100s, 4d
-# Return a string of minutes, hours, seconds, days
-# Else return the second argument
-sub figureTimeUnits {
-    my $arg = shift;
-
-    ($arg =~ /(s|sec|second|seconds)$/i)	&& return "seconds";
-    ($arg =~ /(m|min|minute|minutes)$/i)	&& return "minutes";
-    ($arg =~ /(h|hr|hour|hours)$/i)	&& return "hours";
-    ($arg =~ /(d|day|days)$/i)		&& return "days";
-
-    return shift;		# return default
-}
-
-# figureTimeSeconds number, defaultUnits
-# Given an number like: 60m, 2h, 100s, 4d
-# Return 60*60, 2*60*60, 100, 4*24*60*60
-sub figureTimeSeconds {
-    my $arg = shift;
-
-    ($arg =~ /([0-9]+)(s|sec|second|seconds)$/i)	&& return $1;
-    ($arg =~ /([0-9]+)(m|min|minute|minutes)$/i)	&& return (60*$1);
-    ($arg =~ /([0-9]+)(h|hr|hour|hours)$/i)	&& return (60*60*$1);
-    ($arg =~ /([0-9]+)(d|day|days)$/i)		&& return (24*60*60*$1);
-
-    if ($_) { 
-	my $def = shift;
-	return $arg * figureTimeSeconds ("1$def"); # return scaled by default
-    } else {
-	return $arg;		# return it
-    }
-}
-
-# BACK COMPATIBILITY (everything now in the workload file)
-# read the testbed conf file, convert to workload sections
-# machine, how many processes, how many threads/proc, arch
-# only the first 2 fields are required.  Lines starting with # are ignored.
-# You can include other files using <include conf/filename.tbd>
-# exampe:
-#	client1  5 10 SunOS5.5.1
-sub readTestbedFile {
-    my $filename = shift;
-    foreach $section (@workload) {
-	next unless ($section->{sectionTitle} =~ /CLIENT/i);
-	print "Testbed $filename skipped, clients read in workload\n";
-	return 1;			# clients already read in workload
-    }
-
-    my $level = 0;
-    if ($_) {
-	$level = 1 + shift;
-	die "Too many nested includes ($level) in $filename!"
-	    unless ($level < 100);
-    }
-    my $handle = "$filename$level";
-    open($handle, "<$filename") ||
-	open($handle, "gunzip -c $filename.gz |") ||
-	    die "Couldn't open testbed $filename: $!";
-
-    while(<$handle>) {
-	chomp;
-
-	s/#.*//;		# strip any comments from line
-
-	m/^\s*$/o &&  next; 	# continue if blank line
-
-	# handle include statement
-	if (m/^<(include|INCLUDE)\s+([^\s]+)\s*>/o) {
-	    #print "Including $2 from $filename\n";
-	    readTestbedFile ($2, $level) || die;
-	    next;
-	}
-
-	# get the server name and number of processes 
-	my @line = split(/\s+/);
-				# create CLIENT entry in workload
-	my $sparm = ArrayInstance->new();
-	if ($line[1]) {
-	    $sparm->{"sectionTitle"} = "CLIENT";
-	    $sparm->{"sectionParams"} = "HOSTS=$line[0]";
-	    $sparm->{"PROCESSES"} = $line[1];
-	    $sparm->{"THREADS"} = $line[2] if ($line[2]);
-	    $sparm->{"ARCH"} = $line[3] if ($line[3]);
-	} else {
-	    $sparm->{"sectionTitle"} = "MONITOR";
-	    $sparm->{"sectionParams"} = "HOSTS=$line[0]";
-	    $sparm->{"COMMAND"} = $line[2];
-	}
-	($params{DEBUG})
-	    && print "<$sparm->{sectionTitle} $sparm->{sectionParams}>\n";
-	push @workload, $sparm;
-    }
-    close ($handle);
-}
-
-# BACK COMPATIBILITY (everything now in the saved workload file)
-# This is now only needed to process mailstone4.1 runs
-sub readConfigFile {
-    my $filename = shift;
-    open(CONFIG, "<$filename") ||
-	open(CONFIG, "gunzip -c $filename.gz |") ||
-	    die "Couldn't open config file $filename: $!";
-
-    while(<CONFIG>) {
-	chomp;
-
-	s/#.*//;		# strip any comments from line
-
-	m/^\s*$/o && next; 	# continue if blank line
-
-	# get the property and value
-	my @line = split(/=/);
-	$params{$line[0]} = $line[1];
-    }
-    close CONFIG;
-}
-
-# read the workload file and store it as a list of hashes
-# Each hash always has the fields: sectionTitle and sectionParams
-# usage: readWorkloadFile filename, \@list
-sub readWorkloadFile {
-    my $filename = shift || die "readWorkloadFile: Missing file name";
-    my $plist = shift || die "readWorkloadFile: Missing return list";
-    my $level = 0;		# file inclusion level
-    my @handles;
-
-    my $fh = "$filename$level";
-
-    ($params{DEBUG}) && print "Reading workload from $filename.\n";
-    open($fh, "<$filename") ||
-	open($fh, "gunzip -c $filename.gz |") ||
-	    die "readWorkloadFile Couldn't open testbed $filename: $!";
-    $includedFiles{$filename} = 1; # mark file as included
-
-    my $sparm=0;
-    my $conline = "";
-    
-    while($fh) {
-	while(<$fh>) {
-	    s/#.*//;		# strip any comments from line (quoting?)
-	    s/\s*$//;		# strip trailing white space
-	    if ($conline) {	# utilize line continue
-		$_ = $conline . "\\\n" . $_;
-		$conline = "";
-	    }
-	    if (m/\\$/o) {	# check for quoted line continue
-		s/\\$//;	# 
-		$conline = $_;
-		next;
-	    }
-	    s/^\s*//;		# strip initial white space
-	    m/^$/o &&  next;	# continue if blank line
-
-	    # handle include and includeOnce statements
-	    if ((m/^<(include)\s+(\S+)\s*>/i)
-		|| (m/^<(includeonce)\s+(\S+)\s*>/i)) {
-		my $incfile = $2;
-		if (($1 =~ m/^includeonce/i) && ($includedFiles{$incfile})) {
-		    ($params{DEBUG})
-			&& print "readWorkloadFile:includeOnce $incfile already read.\n";
-		    next;
-		}
-		($params{DEBUG})
-		    && print "readWorkloadFile include $incfile from $filename.\n";
-		$includedFiles{$incfile} = 1; # mark file
-		push @handles, $fh; # push current handle on to stack
-		if ($level++ > 99) { # check recursion and make handles unique
-		    die "readWorkloadFile: include level too deep: $filename $level\n";
-		}
-		$fh = "$incfile$level";
-		open($fh, "<$incfile") ||
-		    open($fh, "gunzip -c $incfile.gz |") ||
-			die "readWorkloadFile Couldn't open testbed file $incfile: $!";
-		$filename = $incfile;	# for error messages
-		next;
-	    }
-
-	    if (m!^</(\w+)>$!o) { # end of section
-		my $end = $1;
-		unless ($sparm->{"sectionTitle"} =~ /$end/i) {
-		    die "readWorkloadFile Mismatched section $filename: $. '$sparm->{sectionTitle}' '$end'\n";
-		    return 0;
-		}
-		($params{DEBUG}) && print "</$sparm->{sectionTitle}>\n";
-		push @$plist, $sparm;
-		$sparm = 0;
-		next;
-	    }
-
-	    if (m!^<(\w+)\s*(.*)>$!o) { # start of section
-		my $sec = $1;
-		my $more = $2;
-
-		if ($sparm) {
-		    die "readWorkloadFile Missing section end $filename: $. '$sparm->{sectionTitle}'\n";
-		}
-		if ($sec =~ /CONFIG/i) { # special case, map to existing global
-		    $sparm = \%params;
-		} elsif ($sec =~ /DEFAULT/i) { # special case, only one DEFAULT
-		    if ($defaultSection) { # use existing defaultSection
-			$sparm = $defaultSection;
-		    } else {	# create a new one
-			$sparm = ArrayInstance->new();
-			$sparm->{"sectionTitle"} = uc $sec; # ignore case
-			$sparm->{"lineList"} = ();
-			$defaultSection = $sparm;
-		    }
-		} else {
-		    $sparm = ArrayInstance->new();
-		    $sparm->{"sectionTitle"} = uc $sec; # ignore case
-		    $sparm->{"lineList"} = ();
-		}
-		$sparm->{"sectionParams"} = $more; # take newest more info
-		($params{DEBUG})
-		    && print "<$sparm->{sectionTitle} $sparm->{sectionParams}>\n";
-		next;
-	    }
-
-	    # must be in a section, get parameters
-	    unless ($sparm) {
-		die "readWorkloadFile Entry encountered outside a section $filename: $. $_\n";
-		return 0;
-	    }
-	    my ($nm, $val) = split (/[\s=]+/, $_, 2);
-	    $nm = uc $nm;	# ignore case
-	    ($params{DEBUG}) && print "    $nm = $val\n";
-	    if ($nm =~ /ACCOUNTFORMAT/) { # BACK COMPATIBILITY
-		print "WARNING: 'accountFormat' is obsolete.  Use 'addressFormat' and 'loginFormat'\n";
-		$sparm->{"addressFormat"} = $val;
-		push @{$sparm->{"lineList"}}, "addressFormat $val";
-		$val =~ s/@.+$//; # strip at and everything after
-		$sparm->{"loginFormat"} = $val;
-		push @{$sparm->{"lineList"}}, "loginFormat $val";
-		next;
-	    } elsif ($nm =~ /NUMACCOUNTS/) { # BACK COMPATIBILITY
-		print "WARNING: 'numAccounts' is obsolete.  Use 'numAddresses' and 'numLogins'\n";
-		$sparm->{"numAddresses"} = $val;
-		push @{$sparm->{"lineList"}}, "numAddresses $val";
-		$sparm->{"numLogins"} = $val;
-		push @{$sparm->{"lineList"}}, "numLogins $val";
-		next;
-	    } elsif ($nm =~ /BEGINACCOUNTS/) { # BACK COMPATIBILITY
-		print "WARNING: 'beginAccounts' is obsolete.  Use 'firstAddress' and 'firstLogin'\n";
-		$sparm->{"firstAddress"} = $val;
-		push @{$sparm->{"lineList"}}, "firstAddress $val";
-		$sparm->{"firstLogin"} = $val;
-		push @{$sparm->{"lineList"}}, "firstLogin $val";
-		next;
-	    } 
-	    push @{$sparm->{"lineList"}}, $_; # save lines in original order
-	    $sparm->{$nm} = $val;
-	    next;
-	}
-	close ($fh);
-	$fh = pop @handles || last; # empty include stack
-	$filename = $fh;
-	$sparm = 0;		# can only include whole sections
-    }
-    return 1;			# success
-}
-
-# Write out a workload list to a file
-# Optionally, pass in a list of sectionTitle's it should ignore
-# usage: writeWorkloadFile filename \@list [\@skipList]
-sub writeWorkloadFile {
-    my $filename = shift || die "writeWorkloadFile: Missing file name";
-    my $plist = shift || die "writeWorkloadFile: Missing return list";
-    my $skip = shift;
-    my @skipH;
-    my $configSeen = 0;
-    my $defaultSeen = 0;
-    my @paramH;
-
-    if ($skip) {
-	foreach $s (@$skip) {	# turn list into a hash
-	    $skipH{(uc $s)} = $s; # fix case for index
-	}
-    }
-    foreach $s (@workloadParameters) { # turn list into a hash
-	$paramH{(uc $s)} = $s;	# fix case for index
-    }
-
-    ($params{DEBUG}) && print "Writing workload to $filename.\n";
-    unless (open(WORKOUT, ">$filename")) {
-	die "Couldn't open testbed $filename: $!";
-    }
-    
-    foreach $sparm (@$plist) {	# each hash reference in the list
-	if (($skip)
-	    && ($skipH{$sparm->{"sectionTitle"}})) {
-	    #($params{DEBUG}) &&
-	    #print "Skipping section $sparm->{sectionTitle}\n";
-	    next;
-	}
-	
-	# all CONFIG,DEFAULT sections point to the same hash, output once only
-	if ($sparm->{"sectionTitle"} =~ /^CONFIG$/) {
-	    next if $configSeen;
-	    $configSeen++;
-	}
-	if ($sparm->{"sectionTitle"} =~ /^DEFAULT$/) {
-	    next if $defaultSeen;
-	    $defaultSeen++;
-	}
-	if ($sparm->{sectionParams}) { # write section with extra args
-	    print WORKOUT "<$sparm->{sectionTitle} $sparm->{sectionParams}>\n";
-	} else {
-	    print WORKOUT "<$sparm->{sectionTitle}>\n";
-	}
-	if ($sparm->{"sectionTitle"} =~ /^(CONFIG|CLIENT)$/) {
-	    # for Config or Client, output the hash  to get computed config
-	    foreach $k (sort keys %$sparm) { # output each parameter
-		# skip sectionTitle and sectionParams
-		($k =~ /^(sectionTitle|sectionParams|lineList)$/) && next;
-		printf WORKOUT "  %s\t%s\n",
-		($paramH{$k}) ? $paramH{$k} : $k,
-		$sparm->{$k};
-	    }
-	} else {	# write out the line list
-	    foreach $l (@{$sparm->{"lineList"}}) {
-		print WORKOUT "  $l\n";
-	    }
-	}
-	print WORKOUT "</$sparm->{sectionTitle}>\n\n";
-    }
-    close WORKOUT;
-}
-
-# Usage: getClientFilename hostname section
-sub getClientFilename  {
-    my $cli = shift || die "Missing client name";
-    my $section = shift || die "Missing section hash";
-    return "$tmpdir/$cli-$section->{GROUP}.out"
-	if ($params{USEGROUPS} && $section->{GROUP});
-    return "$tmpdir/$cli.out"
-}
-
-sub setConfigDefaults {		# set CONFIG defaults
-    # These are set after writing out the test copy to avoid clutter
-
-    # Path to gnuplot executable
-    $params{GNUPLOT}="gnuplot/gnuplot"
-	unless ($params{GNUPLOT});
-
-    # This is the directory the client lives in
-    $params{TEMPDIR} = "/var/tmp"
-	unless($params{TEMPDIR});
-
-    # Set default remote shell
-    #$params{RSH} = "rsh"
-    $params{RSH} = "ssh"
-	unless($params{RSH});
-
-    # Set default remote copy
-    #$params{RCP} = "rcp"
-    $params{RCP} = "scp"
-	unless($params{RCP});
-
-    # Size of generated gifs
-    $params{CHARTHEIGHT} = 480
-	unless($params{CHARTHEIGHT});
-    $params{CHARTWIDTH} = 640
-	unless($params{CHARTWIDTH});
-    $params{CHARTPOINTS} = int (($params{CHARTWIDTH}-60)*0.8)
-	unless($params{CHARTPOINTS});
-
-
-    # The name of the remote executable
-    $params{CLIENTCOMMAND} = "mailclient"
-	unless ($params{CLIENTCOMMAND});
-
-    # Set default monitoring command
-    $params{MONITORCOMMAND} = "vmstat %f"
-	unless($params{MONITORCOMMAND});
-
-    # Set default switches to makeusers
-    $params{MAKEUSERSARGS} = "-4"
-	unless ($params{MAKEUSERSARGS});
-
-    # Figure out @protocols, this sets the report order
-    @protocols = ();
-    {
-	my %skipH;
-	foreach $s (@nonProtocolSections) { # turn list into a hash
-	    #print "$s ";
-	    $skipH{(uc $s)} = $s; # fix case for index
-	}
-	print "\n";
-	foreach $sparm (@workload) {	# each hash reference in the list
-	    next if ($skipH{$sparm->{"sectionTitle"}});
-
-	    ($params{DEBUG}) &&
-		print "Found protocol ". $sparm->{"sectionTitle"} . "\n";
-
-	    push @protocols, $sparm->{"sectionTitle"};
-				# add to skip list so only added once
-	    $skipH{(uc $sparm->{"sectionTitle"})} = $sparm->{"sectionTitle"};
-	}
-    }
-    @protocolsAll = @protocols;
-    push @protocolsAll, "Total";
-
-    # figure out the graphs ???
-}
-
-sub parseArgs {			# get args
-    while (@ARGV) {
-	my $arg = shift(@ARGV);
-
-	if ($arg =~ /^-a$/i) {	# was undocumented feature in 4.1
-	    $params{ADDGRAPHS} = shift(@ARGV); # extra graphs
-	    next;
-	}
-	if ($arg =~ /^-b$/i) {
-	    $params{TITLE} = shift(@ARGV); # banner
-	    next;
-	}
-
-	# BACK COMPATIBILITY (everything now in the saved workload file)
-	if ($arg =~ /^-c$/i) {	# config file, read when encountered
-	    my $configFile = shift(@ARGV);
-	    readConfigFile ($configFile);
-	    next;
-	}
-
-	if ($arg =~ /^-d$/i) {
-	    $params{DEBUG}++;	# Debug
-	    next;
-	}
-
-	if ($arg =~ /^-h$/i) {	# Help
-	    print "Usage: -w workfile [-t time] [-r ramptime] [-l load] [-v] [-d]\n";
-	    print "\t[-b banner] [-n notes] [-s sysconfigfile] [-a add_graphs_file]\n";
-	    print "\t[-c configfile] [-m machinefile] [-z] [PARAM=value]...\n";
-
-	    die "Usage";
-	}
-
-	if ($arg =~ /^-l$/i) {	# "load", FIX: naming conventions
-	    $params{CLIENTCOUNT} = shift(@ARGV); # desired client count
-	    next;
-	}
-
-	# BACK COMPATIBILITY (everything now in the saved workload file)
-	if ($arg =~ /^-m$/i) {
-	    $params{TESTBED} = shift(@ARGV);	# testbed machines file
-	    next;
-	}
-
-	if ($arg =~ /^-n$/i) {
-	    $params{COMMENTS} = shift(@ARGV); # notes
-	    next;
-	}
-
-	if ($arg =~ /^-r$/i) {
-	    $params{RAMPTIME} = shift(@ARGV); # ramptime
-	    next;
-	}
-	if ($arg =~ /^-s$/i) {
-	    $params{SYSCONFIG} = shift(@ARGV); # system config html file
-	    next;
-	}
-	if ($arg =~ /^-t$/i) {
-	    $params{TIME} = shift(@ARGV); # test time
-	    next;
-	}
-
-	if ($arg =~ /^-v$/i) {
-	    $params{VERBOSE} = 1;	# verbose mode
-	    next;
-	}
-
-	if ($arg =~ /^-w$/i) {	# workload file (may occur multiple times)
-	    my $f = shift(@ARGV);
-	    readWorkloadFile ($f, \@workload) || die "Error reading workload: $@\n";
-	    $params{WORKLOAD} = $f;
-	    next;
-	}
-
-	if ($arg =~ /^-z$/i) {
-	    $params{NT} = 1;		# NT mode
-	    next;
-	}
-
-	# any other CONFIG parameter: FIELD=value
-	if ($arg =~ /^(\w+)=(\S.*)$/) {
-	    my $field = uc $1;
-	    $params{$field} = $2;
-	    next;
-	}
-	die "Unknown argument '$arg'";
-    }
-
-    if ($params{NT}) {		# should use Cwd module
-	$cwd = `cd`;		# NT get current directory
-	$cwd = `pwd` unless ($cwd); # in case we are really on UNIX
-    } else {
-	$cwd = `pwd`;		# in case we are really on UNIX
-    }
-    chomp $cwd;		# strip NL
-}
-
-return 1;

mozilla/mstone/conf/README.wld.in

@@ -1,271 +0,0 @@
-I.   Format
-II.  Workload Configuration Sections
-III. Report Generation Sections
-
----------
-I. Format
----------
-
-The config-file format is very free-form -- for example, this text is
-skipped as a "comment" because it doesn't look like anything else.  A
-section always starts with a line ending in a colon.  Everything up to
-the next section, end-of-file, or `__END__' is part of the current
-section.
-
-Name/value pairs within a section are pairs starting with whitespace,
-and separated by a colon followed by whitespace.  So you can write
-something like this
-
-#	hello there:		     mister foo
-
-and it will be ignored.  Had the '#' before the "hello" not been
-there, the attribute name would have been `hello there' and its value
-would have been `mister foo'.  Leading and trailing whitespace is
-skipped, but internal whitespace is perfectly OK.  Note that the
-"comment" character doesn't have to be a '#', but can be anything you
-want (except whitespace).
-
-Leading whitespace also denotes continued values.  So
-
-	foo:				blah blah
-    and some more words which are part of foo's value.
-
-creates a variable named 'foo' with this value (including the \n) -- 
-"blah blah
-and some more words which are part of foo's value."
-
-Finally, anything after '__END__' on a line by itself gets inserted
-literally into each .wld file.  This is the place to put <monitor>
-sections.
-
---------------------------
-II. Workload Configuration
---------------------------
-
-Parameters with no default are required.
-
-Messages
---------
-
-Message attributes are defined in the `message' section.  
-
-Parameter	Default		Description
----------	-------		-----------
-size				size distribution (including headers).
-recipients		    	number of recipients
-headers		~unif(10, 30)	number of headers
-line length	60		line length
-mime	 	0		number of MIME parts
-
-Users
------
-
-User behavior parameters are described in the `user' section.
-
-Parameter	Default		Description
----------	-------		-----------
-messages per day
-protocol			mail read
-activity			`DURATION each TIME' or `START - STOP'
-check interval			how often user checks mail when active
-read messages	0		number of old msgs each user has
-read time	0		how long user takes to `read' a message
-keep		0		proportion of messages kept on server
-connection type <unlimited>	`latency = X ; bandwidth = X'
-drop rate	0		proportion of connections dropped before logout
-
-Delivery
---------
-
-Delivery parameters are described in the `delivery' section.
-
-Parameter		Default		Description
----------		-------		-----------
-messages per connection	1		messages sent per SMTP session
-percent remote		0		% mail going to remote host (sink)
-connection type		<unlimited>	
-fluctuation		<uniform>	`START - END = X % ; ...'
-
-Test
-----
-
-The `test' section configures the number of users, the time of day to
-be simulated, etc.
-
-Parameter		Default		Description
----------		-------		-----------
-start					time of day to start sim
-end					end time of day.
-length					duration.  Either length or end 
-					must be specified.
-users					total user base
-percent active				percentage of total user base active
-					during test period
-messages per second			messages per second to delivery for
-					SMTP-only simulation.  Either
-					`messages per second' or `users'
-					and `percent active' must be
-					specified.
-comments		<nothing>	notes on test.
-preparer		Anonymous	Name to use on reports.
-date			<ctime(3)>
-configuration		<nothing>	Configuration name for report.
-
-Environment Configuration
--------------------------
-
-Several sections describe the test environment:
-
-Sink
-----
-
-The `sink' section describes the remote mail sink.
-
-Parameter		Default		Description
----------		-------		-----------
-addressFormat		smuser%ld@	Like addressFormat, but used to 
-					generate remote addresses.
-					`hostname' will be appended if it
-					ends in `@'.
-hostname				host on which SMTP sink lives.  Used
-					for remote delivery.
-
-Server
-------
-
-The `server' section describes the mail server to be sized:
-
-Parameter		Default		Description
----------		-------		-----------
-smtp port		25
-pop port		110
-imap port		143
-web port		1066
-
-hostname				Mail server
-
-addressFormat		smuser%ld@	Passed to
-					sprintf(recipient, addressFormat,
-					        userNum, domainNum).  If
-					addressFormat ends in `@', `server'
-					is automatically appended.
-loginFormat		smuser%ld@	Same as addressFormat, but used to
-					generate usernames.
-passwdFormat		twang		passed to sprintf(passwd, passwdFormat,
-						          userNum, domainNum).
-firstAddress		0		first userNum for addresses
-firstLogin		0		first userNum for logins
-smtpMailFrom		$USER@$HOST	sending address on test mail.
-
-name					Printable server name for reports.
-hardware				Brief hardware description.
-software				Brief software description.
-
-Clients
--------
-
-The `clients' section describes test client configuration.
-
-Parameter		Default		Description
----------		-------		-----------
-smtp			localhost	client machines for SMTP
-imap			localhost	for IMAP
-pop			localhost	for POP3
-web			localhost	for WEBMAIL
-
-rsh			rsh		rsh program to start remote clients
-rcp			rcp		rcp program to distribute files
-command			mailclient	program to run to start clients
-
-cert file				file containing SSL certificate
-key file				file containing SSL key
-
-Ugly Mstone details
--------------------
-
-The `mstone' section controls low-level details of how the workload
-description is translated into mstone terms.  The parameters make some
-assumptions about the size of both the test clients and the server, so
-they may have to be tweaked.  For small- to mid-size configurations,
-the defaults should work.
-
-Parameter		Default		Description
----------		-------		-----------
-preload rate		5		msgs/sec to deliver during preload.
-preload per connection	100		messages per SMTP session
-preload delivery time	750		msec expected message delivery time.
-					used to control throttling.
-preload throttle	500		msec faster/slower than expected at
-					which to throttle
-throttleFactor		1.1		factor by which to increase/decrease
-					delivery rate when throttling
-
-read rate		40		msgs/sec to read when aging old
-					messages.
-read clients		5		test clients to use for aging
-read protocol		(user:protocol)	protocol to age messages (e.g. imap)
-
-rampTime		0		test rampup time
-smtp connection time	10s
-pop user spacing	10s		MULTIPOP: time between users
-pop connections per client 10		MULTIPOP: connections per client
-no event queues		false		use 1 thread per client
-max threads per proc	250
-clientCount		10000		artificial global clientCount
-
-----------------------
-III. Report Generation
-----------------------
-
-There are several additional configuration sections to provide
-additional information for sizing reports.  The code is in
-`lib/{sizing,hardware}_defaults.pm'.
-
-QoS Constraints
----------------
-
-Quality of Service constraints are specified in the `qos' section.
-See reports/qos.in for an example.  The qos section can have any
-number of members.  The name of each member is a description which
-will appear in the sizing report.  The value is a block of perl code
-which should return a pair of values when evaluated in a context where
-`$run' is a reference to a hash containing data on the test run to be
-evaluated.  The first value is a value corresponding to this
-constraint which will be printed in the report.  The second is true if
-the run passed this constraint.
-
-Hardware
---------
-
-The `machine' section describes the hardware under test.  Unlike
-previous, simple sections, it containts nested values (as hash refs).
-
-Parameter		Description
----------		-----------
-
-processors
-	speed
-	cache
-
-network
-
-storage
-	controllers
-	disks
-		type
-		speed
-		model
-		timing
-OS
-	parameters
-	disks
-	logging
-
-Software
---------
-
-The `software' section describes the software under test.  If multiple
-types of software are in use, multiple software sections should be
-specified.  The only default parameter for software is the `name'.
-Other parameters should describe configuration information, version,
-etc.

mozilla/mstone/conf/com.wld.in

@@ -1,53 +0,0 @@
-test:
-	start:			8 AM
-	length:			1h
-	users:			** Number of users here ***
-
-	percent active:		100
-
-	comments:		auto-generated Corporate workload.
-
--- mail server configuration --
-
-server:
-	hostname:		** SERVER **
-
-# defaults given below --
-#	addressFormat:		smuser%ld@
-#	loginFormat:		smuser%ld@
-#	passwdFormat:		twang
-
--- test client configuration --
-
-clients:
-	smtp:			** SMTP clients here **
-	imap:			** IMAP clients here **
-
-# defaults are `rsh' and `rcp'
-#	rsh:			ssh
-#	rcp:			scp
-
--- Don't edit between here and the `__END__' marker --
-
-mstone:
-	rampTime:		30s
-
-message:
-	size: 			~lognormal(4k,4.5)
-	recipients:		~lognormal(1,2)		: [1, ]
-	mime:			~binomial(0.3)
-
-delivery:
-	fluctuation: 		8 AM - 4 PM = 90%
-
-user:
-	messages per day: 	50
-	read messages:	  	50
-	protocol:	  	IMAP
-	check interval:	  	~unif(5m, 8m)
-	connection type:  	latency = 0; bandwidth = 56k
-	keep:		  	100%
-	activity: 		8 AM - 4 PM; arrival rate = ~normal(20m, 10m) 
-
-__END__
-# your monitor sections go here...

mozilla/mstone/conf/general.wld

@@ -1,2 +0,0 @@
-<client HOSTS=localhost>
-</client>

mozilla/mstone/conf/general.wld.in

@@ -1,38 +0,0 @@
-# common setup info for tests
-# See sample.wld for detailed usage
-
-# Information on how the test is distributed and reported
-# Test independent configuration
-<CONFIG>
-  comments	Netscape MSG4.15
-  sysConfig 	conf/sample.html	# File for additonal system config
-
-  # Debug with short runs and a few clients, then increase test time
-  # These get overridden in the test specific files (or the command line)
-  clientCount	5	# nominal clientCount (usually overriden)
-  rampTime 	10s
-  time		30s
-
-  # each test should set a title in their CONFIG section
-  # This is a reminder when using old test workloads
-  title		Need to set test title
-</CONFIG>
-
-# Specify client machines
-<CLIENT HOSTS=localhost>
-</CLIENT>
-
-# Information on the test itself
-
-# Use the <Default> tag to set command defaults
-<DEFAULT>
-  server	mailhost.example.com
-  smtpMailFrom	mailtestuser0@mailhost.example.com
-  loginFormat	mailtestuser%ld
-  addressFormat	mailtestuser%ld@mailhost.example.com
-  passwdFormat	myPassword
-  numLogins	100
-  firstLogin	0
-  numAddresses	100
-  firstAddress	0
-</DEFAULT>

mozilla/mstone/conf/http.wld

@@ -1,10 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical HTTP GETs
-
-<includeOnce conf/general.wld>
-
-<HTTP>
-weight 100
-numLoops 1 
-httpcommand GET /
-</HTTP>

mozilla/mstone/conf/imap.series

@@ -1,74 +0,0 @@
-#!/bin/ksh
-# fire off the series of Mailstone IMAP tests
-
-# To test series setup, do: go_imap -n
-
-
-# Look for testname$test_form, first.  Override with: go_series -f <string>.
-export test_form="_mail02"
-
-export test_host="mail02"
-
-# string appended to every description.  Override with: go_series -d <string>.
-export desc_conf="12 CPUs"
-
-# Extra arguments common to all tests.  Any other args go here.
-# Note that arguments with embedded spaces wont work here.  
-#   Instead use: go_series -- <args...>
-export extra_args=""
-
-# error limit to abort sequence
-export error_limit=500
-
-# time to allow the server to calm down after each run (seconds)
-export sleep_time=120
-
-# who to mail results to
-#export mail_list="me@example.com,you@example.com"
-export mail_list=""
-
-# Get all the helper functions
-. test_utils.ksh
-
-### This is where the series of tests is defined
-
-# clean and re-start server
-if [[ $only_show_it -gt 0 ]] ; then
-  echo  "Would run:" "$@"
-  return 0
-else
-  # BUG: rsh never returns.
-  #   individual commands in clean work fine, but fail as a whole
-  rsh -n $test_host /bin/ksh /iplanet/bin/clean$test_form &
-  sleep 300 && kill -9 $!
-  wait
-fi
-
-# check our setup
-run timesync
-
-###echo "DEBUG exit" && exit 0
-
-run_test popdel 'Create mailboxes (random order)' -t 60m maxblocks=100000 "$@"
-run_test allpop 'Create mailboxes (exhaustive)' "$@"
-
-run_test imaplogin 'IMAP login rate' "$@"
-
-run_test smtp10k-5-5k 'Deliver 5, 5k messages to 10k users' "$@"
-sleep 200			# let queue drain (2000/(10 msg/sec))
-run_test imapread10k 'IMAP Message downloads 5k from 10k users' "$@"
-
-run_test smtp10k-5-5k 'Deliver 5, 5k messages to 10k users' "$@"
-sleep 200			# let queue drain (2000/(10 msg/sec))
-run_test imapread 'IMAP Message downloads 5k' "$@"
-
-run_test imapsmtp-throttle 'Combined IMAP-SMTP load (1 of 3)' "$@"
-run_test imapsmtp-throttle 'Combined IMAP-SMTP load (2 of 3)' "$@"
-run_test imapsmtp-throttle 'Combined IMAP-SMTP load (3 of 3)' "$@"
-
-# Some messages will be left from previous test
-run_test imapmaxusers 'IMAP 30K simultaneous users' "$@"
-
-# e-mail the whole batch
-[[ -n "$mail_list" ]] && \
-	    mail_series "DotCom IMAP: `date`" "$mail_list"

mozilla/mstone/conf/imap.wld

@@ -1,19 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical IMAP checks/reads
-
-<includeOnce conf/general.wld>
-
-<CONFIG>	# test specific config
-  title		IMAP reads
-  clientCount	100	# since IMAP has long sleeps, use lots of clients
-</CONFIG>
-
-<IMAP4>
-  weight	100
- #leaveMailOnServer	1
-
-  idleTime	2s	# time between login and first download check
-  loopDelay	5m	# time between download checks
-  numLoops	10	# how many check to do before closing the connection
-  blockTime	2s	# time between logout and next login (or other block)
-</IMAP4>

mozilla/mstone/conf/isp.wld.in

@@ -1,51 +0,0 @@
--- test size --
-
-test:
-	length:			90m
-	users:			** Number of users here ***
-	percent active:		10
-
-	comments:		Auto-generated ISP workload.
-
--- mail server configuration --
-
-server:
-	hostname:		** SERVER **
-
-# defaults -- 
-#	 addressFormat:		smuser%ld@
-#	 firstAddress:		0
-#	 loginFormat:		smuser%ld@
-#	 firstLogin:		0
-#	 passwdFormat:		twang
-#
-
--- test client configuration --
-
-clients:
-	smtp:			** SMTP clients here **
-	pop:			** POP clients go here **
-
-# defaults are `rsh' and `rcp'
-#	rsh:			rsh
-#	rcp:			rcp
-
--- Do not edit between here and the `__END__' marker
-
-message:
-	size: 			~lognormal(3k,4.5)
-	recipients:		~lognormal(1,1.5)	: [1, ]
-	mime:			30 %
-
-user:
-	messages per day: 	5
-	read messages:	  	0
-	protocol:	  	POP
-	check interval:	  	~unif(5m, 8m)
-	connection type:	latency = 0; bandwidth = 56k
-	keep:		  	5%
-	activity:		30 m each 24 h
-	drop rate:		0.5%
-
-__END__
-# other things (e.g. <monitor> sections) can go here...

mozilla/mstone/conf/lmtp_imap.wld

@@ -1,36 +0,0 @@
-<default>
-  addressFormat           smuser%ld@** DOMAIN **
-  loginFormat             smuser%ld@** DOMAIN **
-  passwdFormat            twang
-  server                  ** SERVER **
-</default>
-
-<smtp HOSTS=smtp>
-  blockTime               0
-  file                    auto
-  firstAddress            0
-  headers                 ~unif(10, 30)
-  mime                    ~binomial(0.3)
-  numAddresses            1000
-  numLoops                1
-  numRecips               ~lognormal(1,2)	: [1, ]
-  size                    ~lognormal(4k,4.5)
-  smtpMailFrom            sender0@** DOMAIN **
-  useEHLO                 2
-  portNum                 2003
-</smtp>
-
-<client HOSTS=localhost>
-  clients                 50
-  group                   smtp
-</client>
-<config>
-  comments                lmtp delivery
-  rampTime                0
-  time                    5m
-  title                   lmtp delivery - IMAP
-  useGroups               1
-</config>
-
-# other things (e.g. <monitor> sections) can go here...
-

mozilla/mstone/conf/lmtp_pop.wld

@@ -1,36 +0,0 @@
-<default>
-  addressFormat           smuser%ld@** DOMAIN **
-  loginFormat             smuser%ld@** DOMAIN **
-  passwdFormat            twang
-  server                  ** SERVER **
-</default>
-
-<smtp HOSTS=smtp>
-  blockTime               0
-  file                    auto
-  firstAddress            0
-  headers                 ~unif(10, 30)
-  mime                    30 %
-  numAddresses            1000
-  numLoops                1
-  numRecips               ~lognormal(1,1.5)	: [1, ]
-  size                    ~lognormal(3k,4.5)
-  smtpMailFrom            sender0@** DOMAIN **
-  useEHLO                 2
-  portNum                 2003
-</smtp>
-
-<client HOSTS=localhost>
-  clients                 50
-  group                   smtp
-</client>
-<config>
-  comments                lmtp delivery
-  rampTime                0
-  time                    5m
-  title                   lmtp delivery - POP
-  useGroups               1
-</config>
-
-# other things (e.g. <monitor> sections) can go here...
-

mozilla/mstone/conf/pop.series

@@ -1,84 +0,0 @@
-#!/bin/ksh
-# fire off the series of Mailstone tests
-
-# To test series, do: go_series -n
-
-
-# Look for testname$test_form, first.  Override with: go_series -f <string>.
-export test_form="_mail02"
-
-export test_host="mail02"
-
-# string appended to every description.  Override with: go_series -d <string>.
-export desc_conf="12 CPUs"
-
-# Extra arguments common to all tests.  Any other args go here.
-# Note that arguments with embedded spaces wont work here.  
-#   Instead use: go_series -- <args...>
-export extra_args=""
-
-# error limit to abort sequence
-export error_limit=500
-
-# time to allow the server to calm down after each run (seconds)
-export sleep_time=120
-
-# who to mail results to
-#export mail_list="me@example.com,you@example.com"
-export mail_list=""
-
-# Get all the helper functions
-. test_utils.ksh
-
-### This is where the series of tests is defined
-
-# clean and re-start server
-if [[ $only_show_it -gt 0 ]] ; then
-  echo  "Would run:" "$@"
-  return 0
-else
-  # BUG: this never returns.  rsh never returns
-  #   individual commands in clean work fine, but fail as a whole
-  rsh -n $test_host /bin/ksh /iplanet/bin/clean$test_form &
-  sleep 300 && kill -9 $!
-  wait
-fi
-
-# check our setup
-run timesync
-
-###echo "DEBUG exit" && exit 0
-
-run_test popdel 'Create mailboxes (random order)' -t 60m maxblocks=100000 "$@"
-run_test allpop 'Create mailboxes (exhaustive)' "$@"
-
-run_test popdel 'Empty checks: never used (1 of 3)' "$@"
-run_test popdel 'Empty checks: never used (2 of 3)' "$@"
-run_test popdel 'Empty checks: never used (3 of 3)' "$@"
-
-run_test smtp10k-5-5k 'Deliver 5, 5k messages to 10k users' "$@"
-sleep 200			# let queue drain (2000/(10 msg/sec))
-
-run_test popsave10k 'Message downloads 5k from 10k users (1 of 3)' "$@"
-run_test popsave10k 'Message downloads 5k from 10k users (2 of 3)' "$@"
-run_test popsave10k 'Message downloads 5k from 10k users (3 of 3)' "$@"
-
-run_test popsave 'Message downloads 5k (1 of 3)' "$@"
-run_test popsave 'Message downloads 5k (2 of 3)' "$@"
-run_test popsave 'Message downloads 5k (3 of 3)' "$@"
-
-run_test popsmtp-throttle 'Combined load (1 of 3)' "$@"
-run_test popsmtp-throttle 'Combined load (2 of 3)' "$@"
-run_test popsmtp-throttle 'Combined load (3 of 3)' "$@"
-
-run_test smtp100k 'SMTP delivery rate' "$@"
-
-run_test popclean 'Message downloads/delete 5k ' "$@"
-
-run_test popdel 'Empty checks (1 of 3)' "$@"
-run_test popdel 'Empty checks (2 of 3)' "$@"
-run_test popdel 'Empty checks (3 of 3)' "$@"
-
-# e-mail the whole batch
-[[ -n "$mail_list" ]] && \
-	    mail_series "DotCom POP: `date`" "$mail_list"

mozilla/mstone/conf/pop.wld

@@ -1,15 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical POP checks/reads
-
-<includeOnce conf/general.wld>
-
-<CONFIG>	# test specific config
-  title		POP reads
-  clientCount	50
-</CONFIG>
-
-<POP3>
-  weight	100
-  numLoops	9999	# will close when messages run out
- #leaveMailOnServer	1
-</POP3>

mozilla/mstone/conf/popimapsmtp.wld

@@ -1,44 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Deliver mail using SMTP
-# This can measure delivery rates for a specified message type.
-# This also fills the store for POP or IMAP tests
-
-<includeOnce conf/general.wld>
-
-<CONFIG>	# test specific config
-  title		POP, IMAP, SMTP combined load
-  clientCount	100
-</CONFIG>
-
-
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical SMTP delivery with 1K message size and restricted accounts
-
-<SMTP HOSTS=client1>
-  file	en-1k.msg
-  weight	100
- #numAddresses	200
-</SMTP>
-
-
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical POP checks/reads
-
-
-<POP3 HOSTS=client2>
-  weight	100
- #leaveMailOnServer	1
-</POP3>
-
-
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical IMAP checks/reads
-
-# IMAP maintains a connection (unlike POP or SMTP)
-# for combined load tests, run it on separate client machines
-<IMAP4 HOSTS=client3>
-  weight	100
-  idleTime	5
-  checkMailInterval	10
-  numLoops	1000
-</IMAP4>

mozilla/mstone/conf/popsmtp.wld

@@ -1,21 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Deliver mail using SMTP
-# This can measure delivery rates for a specified message type.
-# This also fills the store for POP or IMAP tests
-
-<includeOnce conf/general.wld>
-
-<CONFIG>	# test specific config
-  title		POP reads with SMTP message deliveries
-  clientCount	50
-</CONFIG>
-
-<include conf/smtp1k.wld>
-<include conf/smtp5k.wld>
-<include conf/smtp17k.wld>
-
-<POP3>
-  weight	100
- #leaveMailOnServer	1
-</POP3>
-

mozilla/mstone/conf/sample.html

@@ -1,12 +0,0 @@
-<!-- this file provides system comments and is merged into reports -->
-<PRE>
-<B> Mailhost.example.com </B>
-  EXAMPLE SYSTEM CONFIGURATION
-  Netscape Messaging Server 4.15 (7/21/99)
-  E6000
-  26x250MHz UltraSPARC-II
-  6.5GB RAM
-  A3500 w/ 60x9GB 7200 RPM
-  store: 5 x (10x9 RAID-0)
-  queue: 1 x (10x9 RAID-0)
-</PRE>

mozilla/mstone/conf/sample.wld

@@ -1,281 +0,0 @@
-# MailStone workload configuration file
-#
-# Include other workload files like this:
-# <include conf/morework.wld>
-#
-# If you want a workload included ONLY ONCE in the test, use this
-# <includeOnce conf/morework.wld>
-# 
-# See Also:
-#	smtp.wld	- typical SMTP delivery test
-#	pop.wld		- typical POP3 check/download test
-#	imap.wld	- typical IMAP4 check/download test
-
-
-######################################################################
-# These sections discribe how the test is run:
-#	CONFIG, CLIENT, MONITOR, PRETEST, POSTTEST
-
-# The <CONFIG> section defines test setup and report parameters
-# Multiple <CONFIG> sections will be merged into a one.
-# The equivalent command line switch is shown in parenthesis.
-<CONFIG>
-  title		POP reads		# title for report and index (-b)
-  comments      Netscape MSG4.1		# additional info at top of report (-n)
-
-  time  	3m			# test time (-t)
-  rampTime      20s			# portion of test to start things (-r)
-  clientCount   12			# number of client connections (-l)
-
-  maxErrors	10000			# set an error abort limit
-  maxBlocks	50000			# stop after this many blocks
-
-  #sysConfig     conf/mailhost.txt	# Pull in config file (-s)
-  sysConfig     \			# Inline config text
-<PRE>\
-<B> mailhost.example.com </B>\
-  Netscape Messaging Server 4.11\
-  Linux 2.2.5\
-  4x400Mhz Xeon (1Mb)\
-  2Gb RAM\
-</PRE>
-
-  useGroups	1			# use group names instead of host names
-
-  telemetry	1			# log telemetry (for debugging)
-
-  # These usually dont need to be set.  These are the defaults
-  GnuPlot	gnuplot/gnuplot
-  RSH		ssh
-# RSH		/usr/bin/remsh		# HP-UX uses this path
-  RCP		scp
-#  RCP		/usr/bin/rcp
-  tempDir	/var/tmp		# client machine directory
-  chartWidth	640
-  chartHeight	480
-  clientCommand	mailclient		# CLIENT command to run
-  monitorCommand	vmstat %f	# MONITOR command to run
-  makeUsersArgs	-4			# args to makeusers
-  imageType	png			# gnuplot image type: png, gif, ...
-</CONFIG>
-
-# Each <Client> section defines one or more client machines
-# Every machine in the section will run the same number of connections
-# Note that there cannot be whitespace between the client hostnames
-<CLIENT HOSTS=client1,client2>
-  arch  Linux2.2_x86
-  maxClients    200
-  maxThreads    50
-
-	# the group is only used if "useGroups" is set
-  group		A
-
-  command	mailclient -m 100	# override the command to run
-</CLIENT>
-
-# Set a specific number of processes and threads
-<CLIENT HOSTS=client3,client4>
-  arch  SunOS5.6
-  processes     2
-  threads       10
-
-	# the group is only used if "useGroups" is set
-  group		B
-</CLIENT>
-
-# Here is how to configure a WinNT client from a Unix mail master
-# The NT rshd must interoperate with Unix rsh; allow redirection of
-#   stdin, stdout, and stderr; and must support binary file copies.
-# Denicomp's wrshdnt has been used sucessfully.  www.denicomp.com
-<CLIENT HOSTS=winnt01>
-  Arch	WINNT4.0
-  command	mailclient.exe
-  tempDir	c:\temp
-</CLIENT>
-
-# The PreTest sections will run before the test starts
-<PRETEST HOSTS=mailhost.example.com>
-# RSH	rsh -l mailuser
-  command	cd /usr/netscape/msg-mailhost; ./getconf
-</PRETEST>
-
-# Each <Monitor> section defines remote monitoring commands 
-#   for one or more machines.
-# Commands containing '%c' run to completion.  
-#  Otherwise the command will be shutdown down
-<MONITOR HOSTS=mailhost.example.com>
-  command       vmstat,%f,%c
-</MONITOR>
-
-# The PostTest sections will run after the test completes
-<POSTTEST HOSTS=mailhost.example.com>
-  command	df
-</POSTTEST>
-
-
-######################################################################
-# available protcols: SMTP, POP3, IMAP4
-#  (command names are not case sensitive)
-#
-# Time formats use suffixes of 's', 'm', 'h', 'd' 
-#   for seconds, minutes, hours, days
-# In account formats, "%ld" is replaced by user number
-
-# These parameters apply to the protocol sections
-# Command parameter     applicable command     Example
-#-------------------------------------------------------------------
-# server		<ALL>			mail.example.com
-# portNum		<ALL>			25
-#  (if no value is given, the default port for that service is used)
-#
-# weight		<ALL>			20
-#
-# loginFormat		<ALL>			test%ld
-#						%ld=address %ld=domain
-# firstLogin		<ALL>			0
-# numLogins		<ALL>			2000
-# sequentialLogins	<ALL>			1
-# passwdFormat		<ALL>			netscape
-#
-# addressFormat		<ALL>			test%ld@mail.example%ld.com
-#						%ld=address %ld=domain
-# firstAddress		<ALL>			0
-# numAddresses		<ALL>			2000
-# sequentialAddresses	<ALL>			1
-#
-# numDomains    	<ALL>			3
-# firstDomain   	<ALL>			0
-# sequentialDomains	<ALL>			1
-#
-# idleTime		<ALL>			5m
-# numLoops		<ALL>			200
-# loopDelay		<ALL>			1m
-# blockTime		<ALL>			5m
-#
-# numRecips		SMTP			3
-# smtpMailFrom		SMTP			mailstone@mail.example.com
-# file			SMTP			en-3k.msg
-# useEHLO		SMTP			1 (default is HELO)
-# useAUTHLOGIN		SMTP			1 (no AUTHLOGIN by default)
-#
-# leaveMailOnServer	POP3,IMAP4		1
-# leaveMailUnSeen	IMAP4			1
-
-# The <Default> section sets command block defaults
-# Multiple <Default> sections will be merged into one
-<DEFAULT>
-  server 	mailhost.example.com
-  smtpMailFrom 	mailhost0@mailhost.example.com
-  addressFormat	mailhost%ld@mailhost.example.com
-  loginFormat 	mailhost%ld
-  passwdFormat 	netscape
-  numLogins 	1000
-  numAddresses 	1000
-</DEFAULT>
-
-# Note: empty host list means all hosts
-<SMTP>
-  file 	en-1k.msg
-  weight 	10 
-  numAddresses 	200
-</SMTP>
-
-<include conf/smtp17.wld>
-
-# Note: the host name must be the same as specified in the CLIENT section
-<POP3 HOSTS=client1,client2>
-  weight 	10
-  #leaveMailOnServer 	1
-</POP3>
-
-<IMAP4 HOSTS=client3>
-  idleTime 	300
-  #weight 	15
-</IMAP4>
-
-
-######################################################################
-# These sections are used to generate the right graphs for the test
-# This is the built in defaults
-<GRAPH name=connects>
-  title 	Number of connections attempted
-  label 	Connections/sec
-  variables 	conn
-  field 	Try
-</GRAPH>
-
-<GRAPH name=connections>
-  title 	Total connections
-  label 	Connections
-  variables 	connections
-</GRAPH>
-
-<GRAPH name=connErrors>
-  title 	Number of connection errors
-  label 	Errors/sec
-  variables 	conn, banner, login, logout
-  field 	Error
-</GRAPH>
-
-<GRAPH name=msgErrors>
-  title 	Number of command/message errors
-  label 	Errors/sec
-  variables 	cmd, submit, retrieve
-  field 	Error
-</GRAPH>
-
-<GRAPH name=retrieves>
-  Title 	Number of messages read
-  label 	Messages/sec
-  variables 	retrieve
-  field 	Try
-</GRAPH>
-
-<GRAPH name=submits>
-  title 	Number of messages written
-  label 	Messages/sec
-  variables 	submit
-  field 	Try
-</GRAPH>
-
-<GRAPH name=commands>
-  title 	Number of commands sent
-  label 	Commands/sec
-  variables 	cmd
-  field Try
-</GRAPH>
-
-<GRAPH name=readBytes>
-  title 	Bytes read
-  label 	Bytes/sec
-  variables 	login, banner, cmd, retrieve, submit, logout
-  field 	BytesR
-</GRAPH>
-
-<GRAPH name=writeBytes>
-  title 	Bytes written
-  label 	Bytes/sec
-  variables 	login, banner, cmd, retrieve, submit, logout
-  field 	BytesW
-</GRAPH>
-
-<GRAPH name=msgTime>
-  title 	Message transfer time
-  label 	Seconds per message
-  variables 	cmd, submit, retrieve
-  field 	Time
-</GRAPH>
-
-<GRAPH name=setupTime>
-  Title 	Connection setup time
-  label 	Seconds per connection
-  variables 	conn, banner, login
-  field 	Time
-</GRAPH>
-
-<GRAPH name=blocks>
-  title 	Number of mailstone blocks executed
-  label 	Blocks/sec
-  variables 	blocks
-	# this is a scalar.  No "field" needed/allowed
-</GRAPH>

mozilla/mstone/conf/smtp.wld

@@ -1,16 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Deliver mail using SMTP
-# This can measure delivery rates for a specified message type.
-# This also fills the store for POP or IMAP tests
-
-<includeOnce conf/general.wld>
-
-<CONFIG>	# test specific config
-  title		SMTP message deliveries
-  clientCount	20
-</CONFIG>
-
-# if we include more than one, we get a distribution of all sizes
-<include conf/smtp1k.wld>
-<include conf/smtp5k.wld>
-<include conf/smtp17k.wld>

mozilla/mstone/conf/smtp.wld.in

@@ -1,33 +0,0 @@
--- test size --
-
-test:
-	length:			90m
-	users:			100
-	messages per second:	** Delivery Rate **
-
-	comments:		Auto-generated SMTP-only workload
-
--- server configuration --
-
-server:
-	hostname:		** SERVER **
-# 	  addressFormat:		smuser%ld@
-# 	  firstAddress:		0
-# 	  loginFormat:		smuser%ld@
-# 	  firstLogin:		0
-# 	  passwdFormat:		twang
-
--- client configuration --
-
-clients:
-	smtp:			** SMTP clients **
-
--- Do not edit between here and the `__END__' marker --
-
-message:
-	size: 			~lognormal(3k,4.5)
-	recipients:		~lognormal(1,1.5)	: [1, ]
-	mime:			30 %
-
-__END__
-# other things (e.g. <monitor> sections) can go here...

mozilla/mstone/conf/smtp17k.wld

@@ -1,16 +0,0 @@
-#MailSTone workload configuration
-
-# Send 17k, 3 recipient messages from all clients
-<SMTP>
-weight 100
-file en-17k.msg
-
-# uncomment this line to just deliver to a subset of addresses
-#numAddresses 200
-
-# deliver each message to more than 1 address
-numRecips 1
-
-numLoops 1	# number of messages to send per login
-
-</SMTP>

mozilla/mstone/conf/smtp1k.wld

@@ -1,16 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical SMTP delivery with 1K message size and restricted accounts
-
-<SMTP>
-weight 100
-file en-1k.msg
-
-# uncomment this line to just deliver to a subset of addresses
-#numAddresses 200
-
-# deliver each message to more than 1 address
-numRecips 1
-
-numLoops 1	# number of messages to send per login
-
-</SMTP>

mozilla/mstone/conf/smtp5k.wld

@@ -1,16 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical SMTP delivery with 5K message size and restricted accounts
-
-<SMTP>
-weight 100
-file en-5k.msg
-
-# uncomment this line to just deliver to a subset of addresses
-#numAddresses 200
-
-# deliver each message to more than 1 address
-numRecips 1
-
-numLoops 1	# number of messages to send per login
-
-</SMTP>

mozilla/mstone/conf/web.wld.in

@@ -1,33 +0,0 @@
--- NOT READY! --
-
-test:
-	length:			?
-	users:			?
-	percent active:		?
-
-server:
-	hostname:		server goes here
-	addressFormat:		smuser%ld@
-	firstAddress:		0
-	loginFormat:		smuser%ld@
-	firstLogin:		0
-	passwdFormat:		twang
-
-clients:
-	smtp:			...
-	web:			...
-
-message:
-	size: 			~lognormal(3k,4.5)
-	recipients:		~lognormal(1,1.5)
-	mime:			30 %
-
-user:
-	messages per day: 	5
-	read messages:	  	50
-	protocol:	  	web
-	check interval:	  	30s
-	connection type:	latency = 0; bandwidth = 56k
-	keep:		  	95%
-	activity:		30 m each 24h
-	drop rate:		50%

mozilla/mstone/conf/webmail.series

@@ -1,74 +0,0 @@
-#!/bin/ksh
-# fire off the series of Mailstone WEBMAIL tests
-
-# To test series setup, do: go_webmail -n
-
-
-# Look for testname$test_form, first.  Override with: go_series -f <string>.
-export test_form="_mail02"
-
-export test_host="mail02"
-
-# string appended to every description.  Override with: go_series -d <string>.
-export desc_conf="12 CPUs"
-
-# Extra arguments common to all tests.  Any other args go here.
-# Note that arguments with embedded spaces wont work here.  
-#   Instead use: go_series -- <args...>
-export extra_args=""
-
-# error limit to abort sequence
-export error_limit=500
-
-# time to allow the server to calm down after each run (seconds)
-export sleep_time=120
-
-# who to mail results to
-#export mail_list="me@example.com,you@example.com"
-export mail_list=""
-
-# Get all the helper functions
-. test_utils.ksh
-
-### This is where the series of tests is defined
-
-# clean and re-start server
-if [[ $only_show_it -gt 0 ]] ; then
-  echo  "Would run:" "$@"
-  return 0
-else
-  # BUG: rsh never returns.
-  #   individual commands in clean work fine, but fail as a whole
-  rsh -n $test_host /bin/ksh /iplanet/bin/clean$test_form &
-  sleep 300 && kill -9 $!
-  wait
-fi
-
-# check our setup
-run timesync
-
-###echo "DEBUG exit" && exit 0
-
-run_test popdel 'Create mailboxes (random order)' -t 60m maxblocks=100000 "$@"
-run_test allpop 'Create mailboxes (exhaustive)' "$@"
-
-run_test webmaillogin 'WebMail login rate' "$@"
-
-run_test smtp10k-5-5k 'Deliver 5, 5k messages to 10k users' "$@"
-sleep 200			# let queue drain (2000/(10 msg/sec))
-run_test webmailread10k 'WebMail Message downloads 5k from 10k users' "$@"
-
-run_test smtp10k-5-5k 'Deliver 5, 5k messages to 10k users' "$@"
-sleep 200			# let queue drain (2000/(10 msg/sec))
-run_test webmailread 'WebMail Message downloads 5k' "$@"
-
-run_test webmailsmtp-throttle 'Combined WebMail-SMTP load (1 of 3)' "$@"
-run_test webmailsmtp-throttle 'Combined WebMail-SMTP load (2 of 3)' "$@"
-run_test webmailsmtp-throttle 'Combined WebMail-SMTP load (3 of 3)' "$@"
-
-# Some messages will be left from previous test
-run_test webmailmaxusers 'WebMail 30K simultaneous users' "$@"
-
-# e-mail the whole batch
-[[ -n "$mail_list" ]] && \
-	    mail_series "DotCom WebMail: `date`" "$mail_list"

mozilla/mstone/conf/wmap.wld

@@ -1,209 +0,0 @@
-# MailStone workload configuration file. See sample.wld for detailed usage
-# Typical WMAP checks/reads
-
-<includeOnce conf/general.wld>
-
-<CONFIG>	# test specific config
-  title		WMAP reads
-  clientCount	1	# since WMAP has long sleeps, use lots of clients
-</CONFIG>
-
-<DEFAULT>
-# leaveMailOnServer	1
-  file			en-1k.msg
-  #numAddresses		200
-  numRecips		1
-
-  idleTime	2s	# time between login and first download check
-  loopDelay	5m	# time between download checks
-  numLoops	10	# how many check to do before closing the connection
-  blockTime	2s	# time between logout and next login (or other block)
-</DEFAULT>
-
-# This version pulls in everything (no caching)
-<WMAP>
-  weight		20
-
-# %s=referhost %s=host %d=content-length
-  wmapClientHeader	"\
-Referer: http://%s/\r\n\
-Connection: Keep-Alive\r\n\
-User-Agent: Mozilla/4.7 [en] (WinNT; U)\r\n\
-Host: %s\r\n\
-Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, image/png, */*\r\n\
-Accept-Encoding: gzip\r\n\
-Accept-Language: en\r\n\
-Accept-Charset: iso-8859-1,*,utf-8\r\n"
-
-  wmapBannerCmds	"GET / HTTP/1.0"
-  wmapBannerCmds	"GET /imx/N24b.gif HTTP/1.0"
-
-  wmapLoginCmd	        "POST /login.msc HTTP/1.0"
-# %s=user %s=password
-  wmapLoginData		"user=%s&password=%s"
-
-# %s=sid
-# (this one is done automatically from the redirect URL)
-#  wmapInboxCmds	"GET /en/mail.html?sid=%s&\
-#lang=en&host=http://toad.mcom.com/&cert=false HTTP/1.0"
-  wmapInboxCmds         "GET /util.js HTTP/1.0"
-  wmapInboxCmds         "GET /en/i18n.js HTTP/1.0"
-  wmapInboxCmds         "GET /main.js HTTP/1.0"
-  wmapInboxCmds         "GET /frame.html HTTP/1.0"
-  wmapInboxCmds         "GET /cfg.msc?sid=%s&security=false HTTP/1.0"
-  wmapInboxCmds         "GET /mbox_fs.html HTTP/1.0"
-  wmapInboxCmds         "GET /imx/N16.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/spacer.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/pull.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/compose.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/search.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/divider.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/trash.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/read.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/sort_dn.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/high-0.gif HTTP/1.0"
-  wmapInboxCmds         "GET /imx/read-1.gif HTTP/1.0"
-
-# %s=sid
-  wmapCheckCmds         "GET /mbox.msc?sid=%s&security=false&mbox=INBOX&\
-start=-9999&count=9999&date=true&srch= HTTP/1.0"
-
-# %s=sid, %d=message uid
-  wmapMsgReadCmds	"GET /msg.msc?sid=%s&security=false&mbox=INBOX&\
-uid=13&process=js,link,target,html,binhex&maxtext=30720 HTTP/1.0"
-  wmapMsgReadCmds	"GET /msg_fs.html HTTP/1.0"
-  wmapMsgReadCmds	"GET /reply.gif HTTP/1.0"
-  wmapMsgReadCmds	"GET /reply_all.gif HTTP/1.0"
-  wmapMsgReadCmds	"GET /forward.gif HTTP/1.0"
-  wmapMsgReadCmds	"GET /prev-0.gif HTTP/1.0"
-  wmapMsgReadCmds	"GET /all-0.gif HTTP/1.0"
-  wmapMsgReadCmds	"GET /next-1.gif HTTP/1.0"
-
-# %s=sid
-#TODO   wmapMsgDeleteCmds	"GET / HTTP/1.0"
-
-# %s=sid
-#TODO   wmapMsgComposeCmds	"GET / HTTP/1.0"
-
-# %s=sid
-#TODO   wmapMsgReplyCmds	"GET / HTTP/1.0"
-
-# %s=sid
-#TODO   wmapMsgReplyallCmds	"GET / HTTP/1.0"
-
-# %s=sid
-#TODO   wmapMsgForwardCmds	"GET / HTTP/1.0"
-
-# %s=sid
-  wmapMsgWriteCmds	"GET / HTTP/1.0"
-
-# %s=sid
-  wmapLogoutCmds	"GET /cmd.msc?sid=%s&security=false&mbox=&cmd=logout HTTP/1.0"
-
-</WMAP>
-
-# This version assumes all static URLs are cached
-<WMAP>
-  weight		80
-
-# %s=referhost %s=host %d=content-length
-  wmapClientHeader	"\
-Referer: http://%s/\r\n\
-Connection: Keep-Alive\r\n\
-User-Agent: Mozilla/4.7 [en] (WinNT; U)\r\n\
-Host: %s\r\n\
-Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, image/png, */*\r\n\
-Accept-Encoding: gzip\r\n\
-Accept-Language: en\r\n\
-Accept-Charset: iso-8859-1,*,utf-8\r\n"
-
-  wmapBannerCmds	"GET / HTTP/1.0"
-
-  wmapLoginCmd	        "POST /login.msc HTTP/1.0"
-# %s=user %s=password
-  wmapLoginData		"user=%s&password=%s"
-
-# %s=sid
-# (this one is done automatically from the redirect URL)
-#  wmapInboxCmds	"GET /en/mail.html?sid=%s&\
-#lang=en&host=http://toad.mcom.com/&cert=false HTTP/1.0"
-  wmapInboxCmds         "GET /cfg.msc?sid=%s&security=false HTTP/1.0"
-
-# %s=sid
-  wmapCheckCmds         "GET /mbox.msc?sid=%s&security=false&mbox=INBOX&\
-start=-9999&count=9999&date=true&srch= HTTP/1.0"
-
-# %s=sid, %d=message uid
-  wmapMsgReadCmds	"GET /msg.msc?sid=%s&security=false&mbox=INBOX&\
-uid=13&process=js,link,target,html,binhex&maxtext=30720 HTTP/1.0"
-
-# %s=sid
-  wmapMsgWriteCmds	"GET / HTTP/1.0"
-
-# %s=sid
-  wmapLogoutCmds	"GET /cmd.msc?sid=%s&security=false&mbox=&cmd=logout HTTP/1.0"
-
-</WMAP>
-
-########################################################################
-#
-# Typical Communicator 4.7 to Messenger Express 4.1 dataflow
-# High level requests (as seen using Network Monitor) and client [port] numbers
-#
-### Login
-#
-# GET /
-#  (gets login screen)
-# GET /imx/N24b.gif
-#  (gets a gif as part of the screen)
-# POST /login.msc
-#  Content-type: application/x-www-form-urlencoded
-#  user=x&password=x
-#  (performs the login, gets a Location: redirect with session ID)
-#  Location: http://mailhost/en/mail.html?sid=ebp32po0bt9u95rh&lang=en&host=http://mailhost/&cert=false
-#
-### INBOX Listing
-#
-#  (first fetch the redirect url)
-# GET /en/mail.html?sid=ebp32po0bt9u95rh&lang=en&host=http://mailhost/&cert=false
-#  (gets the inbox screen)
-# GET /util.js
-# GET /en/i18n.js
-# GET /main.js
-# GET /frame.html
-# GET /frame.html
-# GET /frame.html
-# GET /cfg.msc?sid=ebp32po0bt9u95rh&security=false
-# GET /frame.html
-# GET /frame.html
-#
-# GET /mbox.msc?sid=ebp32po0bt9u95rh&security=false&mbox=INBOX&start=-9999&count=9999&date=true&srch=
-# GET /mbox_fs.html
-# GET /imx/N16.gif
-# GET /imx/spacer.gif
-# GET /imx/pull.gif
-# GET /imx/compose.gif
-# GET /imx/divider.gif
-# GET /imx/trash.gif
-# GET /imx/search.gif
-# GET /imx/read.gif
-# GET /imx/sort_dn.gif
-# GET /imx/high-0.gif
-# GET /imx/read-1.gif
-#
-### Reading a message
-#
-# GET /msg.msc?sid=ebp32po0bt9u95rh&security=false&mbox=INBOX&uid=13&process=js,link,target,html,binhex&maxtext=30720
-# GET /msg_fs.html
-# GET /imx/reply.gif
-# GET /imx/reply_all.gif
-# GET /imx/forward.gif
-# GET /imx/prev-0.gif
-# GET /imx/all-0.gif
-# GET /imx/next-1.gif
-#
-### Logout
-#
-# GET /cmd.msc?sid=ebp32po0bt9u95rh&security=false&mbox=&cmd=logout
-#
-########################################################################

mozilla/mstone/config/config.mk

@@ -1,227 +0,0 @@
-# Figure out the OS sepecific setup stuff
-
-# Define a flag for include-at-most-once
-INCLUDED_CONFIG_MK = 1
-
-# Mstone features to choose at compile-time:
-# See doc/mstone_changes.html for details.
-AUTOGEN = 1			# automatic body generation
-IMAP_RAMPDOWN = 1		# ramp-down time for IMAP
-SOCK_LINESPEED = 1		# (primitive) linespeed limitation
-# SOCK_SSL = 1			# SSL/TLS and STARTTLS
-SSL_INCLUDE = /usr/include/openssl
-SSL_LIBS = /usr/lib/openssl
-
-# MSG_READ_TIME = 1		# delay after message retrieval
-USE_EVENTS = 1			# use event-queue model -- less threads
-GEN_CHECKSUM = 1		# try to verify message integrity
-DYNAMIC_THROTTLE = 1		# throttle preload dynamically
-
-# These normally get overridden on the command line from ../Makefile
-# This is the default build type
-BUILD_VARIANT	= release
-ifeq ($(BUILD_VARIANT), debug)
-	BUILD_TYPE = DEBUG
-	OBJDIR_TAG = _DBG
-else
-	BUILD_TYPE = RELEASE
-	OBJDIR_TAG = _OPT
-endif
-
-OS_ARCH := $(shell uname -s)
-
-ifeq ("$(OBJDIR)", "")
-ifeq ($(OS_ARCH), WINNT)
-	NSARCH := WIN32
-else
-	NSARCH := $(shell $(topsrcdir)/nsarch)
-endif
-	OBJDIR = $(topsrcdir)/build/$(NSARCH)$(OBJDIR_TAG).OBJ
-	PKGDIR = $(topsrcdir)/build/package/$(NSARCH)$(OBJDIR_TAG).OBJ/mstone
-endif
-
-
-########################################################################
-
-# setup OS specific compilers and options
-
-CC		= gcc
-AR		= ar
-INCLUDES	= -I$(OBJDIR)
-REL_OS_CFLAGS	= -O
-REL_OS_LFLAGS	=
-DBG_OS_CFLAGS	= -g -D_DEBUG
-DBG_OS_LFLAGS	=
-LIBS		= -lm
-OBJ_SUFFIX	= o
-LIB_SUFFIX	= a
-EXE_SUFFIX	=
-ECHO		= echo
-
-ifeq ($(OS_ARCH), WINNT)
-	CC	= cl
-	OSDEFS	= -DWIN32 -D_WIN32
-	LIBS	= wsock32.lib libcmt.lib msvcrt.lib
-	REL_OS_CFLAGS =
-	REL_OS_LINKFLAGS = /link
-	DBG_OS_CFLAGS = -Od -Zi
-	DBG_OS_LINKFLAGS = /link /debug:full
-	OBJ_SUFFIX = obj
-	LIB_SUFFIX = .lib
-	DLL_SUFFIX = .dll
-	EXE_SUFFIX = .exe
-	PERL_OS = MSWin32-x86
-# build perl manually, install to c:\perl.  Then build everything else
-#  cd win32 && nmake && nmake install
-	PERL5_IMPORT	= c:/perl/$(PERL_REV)/
-	PERL_FILES = $(PERL_DIR)/Artistic
-	PERL_BIN_FILES = \
-	  $(PERL5_IMPORT)/bin/$(PERL_OS)/perl$(EXE_SUFFIX)
-	  $(PERL5_IMPORT)/bin/$(PERL_OS)/perl$(DLL_SUFFIX) \
-	PERL_LIB_FILES = $(PERL5_IMPORT)/lib/*.pm $(PERL5_IMPORT)/lib/*.pl
-	PERL_LIB_OS_FILES = $(PERL5_IMPORT)/lib/$(PERL_OS)/*.pm
-endif
-ifeq ($(OS_ARCH), IRIX64)
-	ARCH	= IRIX
-endif
-ifeq ($(OS_ARCH), IRIX)
-# MIPSpro Compilers: Version 7.2.1
-	CC	= /usr/bin/cc -n32
-	REL_OS_CFLAGS = -fullwarn
-	DBG_OS_CFLAGS = -fullwarn
-	OSDEFS	= -D__IRIX__ -DHAVE_SELECT_H -DHAVE_WAIT_H -DUSE_PTHREADS -DUSE_LRAND48
-	LIBS	= -lm -lpthread
-# OS specific flags for perl Configure
-	PERL_OS_CONFIGURE = -Dnm=/usr/bin/nm -Dar=/usr/bin/ar
-	PERL_OS = IP27-irix
-endif
-ifeq ($(OS_ARCH), OSF1)
-# DEC C V5.6-071 on Digital UNIX V4.0(D) (Rev. 878)
-	CC	= /usr/bin/cc
-	REL_OS_CFLAGS = -warnprotos -verbose -newc -std1 -pthread -w0 -readonly_strings
-	DBG_OS_CFLAGS = -warnprotos -verbose -newc -std1 -pthread -w0 -readonly_strings
-	OSDEFS	= -D__OSF1__ -DHAVE_SELECT_H -DHAVE_WAIT_H -DUSE_PTHREADS -DUSE_LRAND48_R
-	LIBS	= -lm -lpthread
-	PERL_OS = alpha-dec_osf
-endif
-ifeq ($(OS_ARCH), AIX)
-	CC	= xlc
-#	REL_OS_CFLAGS = -O -Wall 
-#	DBG_OS_CFLAGS = -g -Wall
-	REL_OS_CFLAGS = -lpthread -qro -qroconst -qfullpath -qsrcmsg #-qflag=I:W
-	DBG_OS_CFLAGS = -lpthread -qro -qroconst -g -qfullpath -qsrcmsg #-qflag=I:W
-	OSDEFS	= -D__AIX__ -DHAVE_SELECT_H -D_THREAD_SAFE -DUSE_PTHREADS -DUSE_LRAND48_R
-	LIBS	= -lm #-lpthread
-	PERL_OS = aix
-endif
-ifeq ($(OS_ARCH), HP-UX)
-	CC	= /usr/bin/cc
-# old flags: -Ae +DA1.0 +ESlit
-	REL_OS_CFLAGS = +DAportable +DS2.0 -Ae +ESlit
-	DBG_OS_CFLAGS = +Z +DAportable +DS2.0 -g -Ae +ESlit
-	OSDEFS	= -D__HPUX__ -DUSE_PTHREADS -DUSE_LRAND48
-	LIBS	= -lm -lpthread
-	PERL_OS = PA-RISC2.0
-endif
-ifeq ($(OS_ARCH), SunOS)
-# Sun Workshop Compilers 5.0
-#	CC	= /tools/ns/workshop-5.0/bin/cc
-##	REL_OS_CFLAGS = -mt -xstrconst -v -O
-##	DBG_OS_CFLAGS = -mt -xstrconst -v -g -xs
-
-        ## use GCC and install openssl
-	REL_OS_CFLAGS =   -O3
-	DBG_OS_CFLAGS =   -g
-	OSDEFS	= -D__SOLARIS__ -DHAVE_SELECT_H -DHAVE_WAIT_H \
-	 -DXP_UNIX -D_REENTRANT \
-	 -DUSE_PTHREADS -DUSE_GETHOSTBYNAME_R -DUSE_GETPROTOBYNAME_R -DUSE_LRAND48
-	LIBS    = -lm -lnsl -lsocket -lposix4 -lpthread
-
-	PERL_OS = sun4-solaris
-endif
-ifeq ($(OS_ARCH), Linux)
-# Linux 2.1 kernels and above
-	CC	= /usr/bin/gcc   # gcc 2.7.2.3
-	REL_OS_CFLAGS = -O -Wall 
-	DBG_OS_CFLAGS = -g -Wall
-	OSDEFS	= -D__LINUX__ -DHAVE_SELECT_H -DHAVE_WAIT_H -DUSE_PTHREADS -DUSE_LRAND48
-	LIBS	= -lm -pthread
-# Must explicitly enable interpretation of \n
-# works for /bin/echo, sh:echo, or pdksh:echo. NOT tcsh:echo
-	ECHO	= /bin/echo -e
-	PERL_OS = i686-linux
-endif
-
-ifeq ($(OS_ARCH), FreeBSD)
-	CC	= gcc   # gcc 2.7.2.3
-	REL_OS_CFLAGS = -O -Wall 
-	DBG_OS_CFLAGS = -g -Wall
-	OSDEFS	= -D__FREEBSD__ -DHAVE_SELECT_H -DUSE_PTHREADS -DUSE_LRAND48
-	LIBS	= -lm -pthread
-# Must explicitly enable interpretation of \n
-# works for /bin/echo, sh:echo, or pdksh:echo. NOT tcsh:echo
-	ECHO	= /bin/echo -e
-	PERL_OS = i686-freebsd
-endif
-
-# pull in any OS extra config, if available
--include $(topsrcdir)/config/$(OS_ARCH)/config.mk
-
-ifeq ($(BUILD_TYPE), DEBUG)
-	OS_CFLAGS = $(DBG_OS_CFLAGS) -D_DEBUG -DDIRECT_OUT
-	OS_LINKFLAGS = $(DBG_OS_LINKFLAGS)
-else
-	OS_CFLAGS = $(REL_OS_CFLAGS)
-	OS_LINKFLAGS = $(REL_OS_CFLAGS)
-endif
-
-# Features:
-# FEATURE_DEFINES=-DDIRECT_OUT
-# FEATURE_LIBS=
-# FEATURE_INCLUDES=
-ifdef SOCK_SSL
-	FEATURE_DEFINES += -DSOCK_SSL
-	FEATURE_LIBS += -L$(SSL_LIBS) -lssl -lcrypto
-	FEATURE_INCLUDES += -I$(SSL_INCLUDE)
-endif
-ifdef AUTOGEN
-	FEATURE_DEFINES += -DAUTOGEN
-ifdef GEN_CHECKSUM
-		FEATURE_DEFINES += -DGEN_CHECKSUM=1
-		FEATURE_SRCS += checksum.c md5.c
-endif
-endif
-ifdef IMAP_RAMPDOWN
-	FEATURE_DEFINES += -DIMAP_RAMPDOWN
-endif
-ifdef DYNAMIC_THROTTLE
-	FEATURE_DEFINES += -DDYNAMIC_THROTTLE
-endif
-ifdef SOCK_LINESPEED
-	FEATURE_DEFINES += -DSOCK_LINESPEED
-endif
-ifdef MSG_READ_TIME
-	FEATURE_DEFINES += -DMSG_READ_TIME
-endif
-ifdef USE_EVENTS
-	FEATURE_DEFINES += -DUSE_EVENTS
-	FEATURE_SRCS += event.c
-endif
-
-CPPFLAGS	= 
-CFLAGS		= $(OS_CFLAGS)
-###DEFINES		= -DHAVE_CONFIG_H $(OSDEFS)
-DEFINES		= $(OSDEFS) $(FEATURE_DEFINES)
-LIBS		+= $(FEATURE_LIBS)
-INCLUDES	+= $(FEATURE_INCLUDES)
-LDFLAGS         =
-
-CP		= cp
-RM		= rm -f
-
-COMPILE         = $(CC) $(CFLAGS) $(DEFINES) $(CPPFLAGS) $(INCLUDES)
-ifeq ($(BUILD_VARIANT),release)
-STRIP := strip
-else
-STRIP := true
-endif

mozilla/mstone/data/en-17k.msg

@@ -1,261 +0,0 @@
-From MalclmKrstl@catlnml.com Mon Aug  2 15:53:54 2004
-Return-Path: <MalclmKrstl@catlnml.com>
-Received: from leggite.example.com ([207.111.254.118]) by snacker.example.com
-          (Netscape Messaging Server 4.15) with ESMTP id I1UA2T00.FEQ for
-          <exp@example.com>; Mon, 2 Aug 2004 14:52:05 -0700 
-Received: from 207.111.254.118 ([201.224.129.137])
-	by leggite.example.com (8.12.8/8.12.8) with SMTP id i72LsWgE015040
-	for <exp@example.com>; Mon, 2 Aug 2004 14:54:51 -0700
-Received: from 24.4.45.15 by 201.224.129.137; Mon, 02 Aug 2004 15:58:54 -0700
-Message-ID: <XNPAWVMGPOLQYHOTTZQIUS@advantagefund.com>
-From: "Joey Lzrd" <MalclmKrstl@catlnml.com>
-Reply-To: "Joey Lzrd" <MalclmKrstl@catlnml.com>
-To: exp@example.com
-Subject: S@ve BlG 0n @ll Adobe S0ftware at Santos's eSoft Inc.
-Date: Mon, 02 Aug 2004 19:53:54 -0300
-MIME-Version: 1.0
-X-MimeOLE: Produced By Microsoft MimeOLE V4.71.2730.1
-X-Sender: MalclmKrstl@catlnml.com
-Organization: briton.ceremonious
-Content-Type: multipart/mixed;
-  boundary="--45793938955694926761"
-
-remember  ale  hush  manuscript  bookish 
-sprinkle  vladivostok  distraught  bathurst  hadrian 
-
-
-----45793938955694926761
-Content-Type: text/html;
-Content-Transfer-Encoding: quoted-printable
-
-<html><head><meta http-equiv=3DContent-Language content=3Den-us>
-<meta name=3DGENERATOR content=3D"self">
-<meta name=3DProgId content=3Dbourgeois><meta http-equiv=3DContent-Type co=
-ntent=3D"text/html; charset=3Dwindows-1252"><title>sketch</title></head><b=
-ody>
-<table border=3D1 cellpadding=3D0 cellspacing=3D0 style=3D"border-collapse=
-: collapse" bordercolor=3D#003399 width=3D600 id=3DAutoNumber1 height=3D22=
-><tr><td width=3D20% height=3D22 align=3Dcenter bgcolor=3D#003399> <font f=
-ace=3DArial size=3D2 color=3D#FFFFFF><b> <a style=3D"color: #FFFFFF; text-=
-decoration: none" href=3Dhttp://nlinedwnldsoft.net/?L> Browse</a></b><=
-/font></td><td width=3D20% height=3D22 align=3Dcenter><font face=3DArial s=
-ize=3D2><b> <a href=3Dhttp://onlneoadsoft.net/?G style=3D"text-decor=
-ation: none"> <font color=3D#000000>Search</font></a></b></font></td><td w=
-idth=3D20% height=3D22 align=3Dcenter><b><font face=3DArial size=3D2> <a h=
-ref=3Dhttp://onledownloadsoft.net/?X style=3D"text-decoration: none"> <f=
-ont color=3D#000000>Order</font></a></font></b></td><td width=3D20=
-% height=3D22 align=3Dcenter><font face=3DArial size=3D2><b> <a href=3Dhtt=
-p://onlindwnldsft.net/?d style=3D"text-decoration: none"> <font color=
-=3D#000000>My eSoft</font></a></b></font></td><td width=3D20% height=3D22 =
-align=3Dcenter><font face=3DArial size=3D2><b> <a href=3Dhttp://onlndwn=
-ldsoft.net/?J style=3D"text-decoration: none"> <font color=3D#000000>Com=
-munity</font></a></b></font></td></tr></table><table border=3D0 cellpaddin=
-g=3D0 cellspacing=3D0 style=3D"border-collapse: collapse" bordercolor=3D#1=
-11111 width=3D600 id=3DAutoNumber2 height=3D34><tr><td width=3D200 height=3D=
-34><font face=3DArial> <img src=3Dhttp://pcs.bsttc.com/aw/pcs/viewi=
-tem/backArrow_14x14.gif width=3D14 height=3D14> <font size=3D2><a href=3Dh=
-ttp://onlindwnldsft.net/?Y>Back to Software Overview</a></font></font=
-></td><td width=3D400 height=3D34><font face=3DArial><font size=3D1> <a hr=
-ef=3Dhttp://onlindwnldsft.net/?5>Home</a> &gt; <a href=3Dhttp://onlin=
-edownloadsoft.net/?Y>All Categories</a> &gt; <a href=3Dhttp://onlinedownlo=
-adsoft.net/?B>Computers</a> &gt; <a href=3Dhttp://onlindwnldsft.net/?=
-d>Software</a> &gt; <a href=3Dhttp://onlindwnldsft.net/?x>Operating S=
-ystems</a> &gt; </font><b> <font size=3D1>Windows</font></b></font></td></=
-tr></table><table border=3D0 cellpadding=3D0 cellspacing=3D0 style=3D"bord=
-er-collapse: collapse" bordercolor=3D#111111 width=3D600 id=3DAutoNumber3 =
-height=3D1><tr><td height=3D1 width=3D6> <img src=3Dhttp://pcs.bsttc=
-com/aw/pcs/listings/allitems_firstDark_6x29.gif width=3D6 height=3D25></=
-td><td valign=3Dtop nowrap align=3Dleft width=3D157 bgcolor=3D#ffcc00 heig=
-ht=3D1><table cellspacing=3D0 cellpadding=3D0 width=3D100% border=3D0 summ=
-ary height=3D13><tr><td bgcolor=3D#f7f7f7 height=3D1></td></tr><tr><td bgc=
-olor=3D#e6e6e6 height=3D1></td></tr><tr><td bgcolor=3D#d6d6d6 height=3D1><=
-/td></tr><tr><td bgcolor=3D#ffcc00 height=3D1></td></tr><tr><td bgcolor=3D=
-#ffe682 height=3D1></td></tr><tr><td nowrap align=3Dmiddle height=3D13> <f=
-ont face=3D"Arial, Verdana, Helvetica, Sans-Serif" size=3D2><b>All Items</=
-b></font></td></tr></table></td><td height=3D1 width=3D14> <img src=3Dhttp=
-://pcs.bsttc.com/aw/pcs/listings/allitems_midDarkOnLight_14x29.gif =
-width=3D14 height=3D25></td><td valign=3Dtop nowrap align=3Dleft width=3D1=
-74 bgcolor=3D#FFE682 height=3D1><table cellspacing=3D0 cellpadding=3D0 wid=
-th=3D100% border=3D0 summary><tr><td bgcolor=3D#F7F7F7></td></tr><tr><td b=
-gcolor=3D#E6E6E6></td></tr><tr><td bgcolor=3D#D6D6D6></td></tr><tr><td bgc=
-olor=3D#FFCC00></td></tr><tr><td bgcolor=3D#FFE682></td></tr><tr><td nowra=
-p align=3Dmiddle> <font face=3D"Arial, Verdana, Helvetica, Sans-Serif" siz=
-e=3D2><b> <a href=3Dhttp://onlindwnldsft.net/?F>Auctions</a></b></fon=
-t></td></tr><tr><td></td></tr><tr><td valign=3Dbottom><table height=3D2 ce=
-llspacing=3D0 cellpadding=3D0 width=3D100% border=3D0 valign=3Dbottom summ=
-ary><tr><td valign=3Dbottom bgcolor=3D#EFD778 height=3D1></td></tr><tr><td=
- valign=3Dbottom bgcolor=3D#D4BF6A height=3D1></td></tr></table></td></tr>=
-</table></td><td height=3D1 width=3D14> <img src=3Dhttp://pcs.bsttc.=
-com/aw/pcs/listings/allitems_midLightLight_14x29.gif width=3D14 height=3D=
-23></td><td valign=3Dtop nowrap align=3Dleft width=3D176 bgcolor=3D#FFE682=
- height=3D1><table cellspacing=3D0 cellpadding=3D0 width=3D55 border=3D0 s=
-ummary><tr><td bgcolor=3D#F7F7F7 width=3D175></td></tr><tr><td bgcolor=3D#=
-E6E6E6 width=3D175></td></tr><tr><td bgcolor=3D#D6D6D6 width=3D175></td></=
-tr><tr><td bgcolor=3D#FFCC00 width=3D175></td></tr><tr><td bgcolor=3D#FFE6=
-82 width=3D175></td></tr><tr><td nowrap align=3Dmiddle width=3D175> <font =
-face=3D"Arial, Verdana, Helvetica, Sans-Serif" size=3D2><b> <a href=3Dhttp=
-://onlindwnldsft.net/?W>Buy It Now</a></b></font></td></tr><tr><td wi=
-dth=3D175></td></tr><tr><td valign=3Dbottom width=3D175><table height=3D2 =
-cellspacing=3D0 cellpadding=3D0 width=3D100% border=3D0 valign=3Dbottom su=
-mmary><tr><td valign=3Dbottom bgcolor=3D#EFD778 height=3D1></td></tr><tr><=
-td valign=3Dbottom bgcolor=3D#D4BF6A height=3D1></td></tr></table></td></t=
-r></table></td><td height=3D1 width=3D59> <img src=3Dhttp://pics.ebaystati=
-c.com/aw/pcs/listings/allitems_endLightTab_14x29.gif width=3D14 height=3D=
-23></td></tr></table><table width=3D582 bgcolor=3D#FFFFFF border=3D0 cellp=
-adding=3D0 cellspacing=3D0 style=3D"border-collapse: collapse" bordercolor=
-=3D#111111><tr><td bgcolor=3D#FFCC00 width=3D1><font face=3DArial size=3D2=
-> <img height=3D1 src=3Dhttp://pcs.bsttc.com/aw/pcs/s.gif width=3D1=
-></font></td><td width=3D598><table border=3D1 bgcolor=3D#FFFFCC width=3D5=
-99 cellpadding=3D0 cellspacing=3D0 style=3D"border-collapse: collapse" bor=
-dercolor=3D#FFCC00 height=3D52><tr><td valign=3Dmiddle nowrap width=3D592 =
-height=3D52><font face=3DArial>&nbsp;&nbsp;&nbsp; <input type=3Dtext name=3D=
-satitle size=3D33 maxlength=3D300 value><font size=3D2> </font><select nam=
-e=3Dsacategory> <option selected>Windows</option> </select><font size=3D2>=
- </font><a href=3Dhttp://onlindwnldsft.net/?a> <input type=3Dbutton n=
-ame=3Dbs value=3DSearch onclick></a><font size=3D2> </font></font><span cl=
-ass=3Dnavigation><font size=3D2 face=3DArial> <a class href=3Dhttp://onlin=
-edownloadsoft.net/?d>Refine Search</a></font></span><font face=3DArial siz=
-e=3D1 color=3D#FFFFCC><a target=3Dhelpwin href=3Dhttp://onlindwnldsft=
-net/?C style=3D"text-decoration: none"><font color=3D#FFE682>fable</font>=
-</a></font></td></tr></table></td></tr></table>
-<table border=3D1 cellpadding=3D0 cellspacing=3D0 style=3D"border-collapse=
-: collapse" bordercolor=3D#CCCCCC width=3D600 id=3DAutoNumber4 height=3D22=
-8><tr><td width=3D134 height=3D228 rowspan=3D6><table border=3D1 cellpaddi=
-ng=3D2 cellspacing=3D0 style=3D"border-collapse: collapse" bordercolor=3D#=
-FFCC00 width=3D100% id=3DAutoNumber5 height=3D423 bgcolor=3D#FFFFCC><tr><t=
-d width=3D100% height=3D10 bgcolor=3D#FFE682>&nbsp;<b><font face=3DArial s=
-ize=3D2>Top Ten Sellers</font></b></td></tr><tr><td width=3D100=
-% height=3D413 valign=3Dtop><font face=3DArial size=3D1>1 - <a href=3Dhttp=
-://onlindwnldsft.net/?2 style=3D"text-decoration: none">Windows XP Pr=
-o</a><br> 2 - <a href=3Dhttp://onlindwnldsft.net/?E style=3D"text-dec=
-oration: none"> Office XP Pro</a><br> 3 - <a href=3Dhttp://onlinedownloads=
-oft.net/?7 style=3D"text-decoration: none"> Adobe Acrobat<br> &nbsp;&nbsp;=
-&nbsp;&nbsp; 6.0 Professional</a><br> 4 - <a href=3Dhttp://onlinedownloads=
-oft.net/?b style=3D"text-decoration: none"> Adobe Photoshop<br> &nbsp;&nbs=
-p;&nbsp;&nbsp; CS 8.0</a><br> 5<a href=3Dhttp://onlindwnldsft.net/?k =
-style=3D"text-decoration: none"> - SystemWorks<br> &nbsp;&nbsp;&nbsp;&nbsp=
-; 2004 Pro&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </a><br> 6 - <a style=3D"text-dec=
-oration: none" href=3Dhttp://onlindwnldsft.net/?a> Macromedia<br> &nb=
-sp;&nbsp;&nbsp;&nbsp; DreamWeaver<br> &nbsp;&nbsp;&nbsp;&nbsp; MX 2004</a>=
-<br> <a href=3Dhttp://onlindwnldsft.net/?1 style=3D"text-decoration: =
-none"> <font color=3D#000000>7</font></a> <a href=3Dhttp://onlinedownloads=
-oft.net/?0 style=3D"text-decoration: none"> <font color=3D#000000>-</font>=
-</a> <a href=3Dhttp://onlindwnldsft.net/?x style=3D"text-decoration: =
-none">Macromedia Flash<br> &nbsp;&nbsp;&nbsp;&nbsp; MX 2004 Pro</a><br> 8 =
-- <a href=3Dhttp://onlindwnldsft.net/?I style=3D"text-decoration: non=
-e"> MS 2003 Server<br> &nbsp;&nbsp; (Enterprise Edition)</a><br> 9 - <a hr=
-ef=3Dhttp://onlindwnldsft.net/?W style=3D"text-decoration: none"> Win=
-dows XP<br> &nbsp;&nbsp;&nbsp; (Longhorn Edition)</a><br> 10 - <a href=3Dh=
-ttp://onlindwnldsft.net/?m style=3D"text-decoration: none">CorelDRAW<=
-br> &nbsp; Graphics Suite 12.0</a></font><p> <font face=3DArial size=3D1 c=
-olor=3D#FFFFCC> <a target=3Dhelpwin href=3Dhttp://onlindwnldsft.net/?=
-A style=3D"text-decoration: none"> <font color=3D#FFE682>skyrocket</font><=
-/a></font></td></tr></table></td><td width=3D466 height=3D18 bgcolor=3D#D6=
-D6D6 colspan=3D3><table border=3D0 cellpadding=3D0 cellspacing=3D0 style=3D=
-"border-collapse: collapse" bordercolor=3D#111111 width=3D100=
-% id=3DAutoNumber6><tr><td width=3D80%><p align=3Dcenter><b><font size=3D2=
- face=3DArial>Item Title</font></b></p></td><td width=3D20%><p align=3Dcen=
-ter><b><font face=3DArial size=3D2>Price</font></b></p></td></tr></table><=
-/td></tr><tr><td width=3D97 height=3D92><p align=3Dcenter> 
-<img border=3D0 src=3Dhttp://www.dara.es/soft/co/micro/xpPro.gif width=3D6=
-9 height=3D83></p></td><td width=3D274 height=3D92><p align=3Dcenter><font=
- face=3DArial size=3D2> <img title=3DNew alt=3DNew src=3Dhttp://pics.ebays=
-tatic.com/aw/pcs/icon/iconNew_16x16.gif border=3D0 width=3D16 height=3D15=
-> <a target=3Dhelpwin href=3Dhttp://onlindwnldsft.net/?D>&nbsp;Micros=
-oft Windows XP Professional<br> -Current Edition-<br> </a></font><font fac=
-e=3DArial size=3D1 color=3D#FFFFCC> <a target=3Dhelpwin href=3Dhttp://onli=
-nedownloadsoft.net/?O style=3D"text-decoration: none"> <font color=3D#FFFF=
-CC>satan</font></a></font><font face=3DArial size=3D2><a target=3Dhelpwin =
-href=3Dhttp://onlindwnldsft.net/?j><br> <img title=3D"Gift Services" =
-alt=3D"Gift Services" src=3Dhttp://pcs.bsttc.com/aw/pcs/bin_15x54.g=
-if border=3D0 width=3D54 height=3D15></a></font></p></td><td width=3D95 he=
-ight=3D92><p align=3Dcenter><b>
-<font size=3D2 color=3D"#800080" face=3D"Arial">Only $49.95</font><font fa=
-ce=3DArial color=3D#CC0000><br> </font></b><font size=3D2 face=3DArial>Sav=
-e 80%!</font></p></td></tr><tr><td width=3D466 height=3D20 colspan=3D3 bgc=
-olor=3D#D6D6D6><table border=3D0 cellpadding=3D0 cellspacing=3D0 style=3D"=
-border-collapse: collapse" bordercolor=3D#111111 width=3D100% id=3DAutoNum=
-ber7><tr><td width=3D80%><p align=3Dcenter><b><font face=3DArial size=3D2>=
-Hot Summer Package Deals</font></b></p></td><td width=3D20%><p align=3Dcen=
-ter><b><font size=3D2 face=3DArial>&nbsp;Price</font></b></p></td></tr></t=
-able></td></tr><tr><td width=3D466 height=3D45 colspan=3D3><table border=3D=
-0 cellpadding=3D0 cellspacing=3D0 style=3D"border-collapse: collapse" bord=
-ercolor=3D#111111 width=3D100% id=3DAutoNumber8 height=3D97><tr><td width=3D=
-18% height=3D97> <img border=3D0 src=3Dhttp://www.dara.es/soft/co/micro/xp=
-Pro.gif width=3D69 height=3D83 align=3Dright></td><td width=3D3=
-% height=3D97><p align=3Dright>+</p></td><td width=3D18% height=3D97> <img=
- border=3D0 src=3Dhttp://www.pym.com.au/images/officexp.gif width=3D80 h=
-eight=3D82></td><td width=3D3% height=3D97>+</td><td width=3D15=
-% height=3D97> <img border=3D0 src=3Dhttp://www.gecadnet.ro/ufolder/photos=
-hopcs.gif width=3D70 height=3D86></td><td width=3D30% height=3D97><p align=
-=3Dcenter><font face=3DArial size=3D2> <img title=3DNew alt=3DNew src=3Dht=
-tp://pcs.bsttc.com/aw/pcs/icon/iconNew_16x16.gif border=3D0 width=3D=
-16 height=3D15> <a href=3Dhttp://onlindwnldsft.net/spo.html?l>Windows=
- XP Pro + Office XP Pro + Adobe Photoshop CS 8.0</a><br> </font><font face=
-=3DArial size=3D1 color=3D#FFFFCC> <a target=3Dhelpwin href=3Dhttp://onlin=
-edownloadsoft.net/?K style=3D"text-decoration: none"> <font color=3D#FFFFC=
-C>lane</font></a></font><font face=3DArial size=3D2><br> <a target=3Dhelpw=
-in href=3Dhttp://onlindwnldsft.net/spo.html?u> <img title=3D"Gift Ser=
-vices" alt=3D"Gift Services" src=3Dhttp://pcs.bsttc.com/aw/pcs/bin_=
-15x54.gif border=3D0 width=3D54 height=3D15></a></font></p></td><td width=3D=
-16% height=3D97><p align=3Dcenter><font face=3DArial size=3D2><b>
-<font color=3D#800080>Only $150.95<br> </font> </b>Save<br> 90=
-%!</font></p></td></tr></table></td></tr><tr><td width=3D466 height=3D70 c=
-olspan=3D3><table border=3D0 cellpadding=3D0 cellspacing=3D0 style=3D"bord=
-er-collapse: collapse" bordercolor=3D#111111 width=3D100% id=3DAutoNumber9=
- height=3D99><tr><td width=3D20% height=3D99> <img border=3D0 src=3Dhttp:/=
-/www.dara.es/soft/co/micro/xpPro.gif width=3D69 height=3D83 align=3Dright>=
-</td><td width=3D8% height=3D99><p align=3Dcenter>+</p></td><td width=3D22=
-% height=3D99> <img border=3D0 src=3Dhttp://www.jaeggi.ch/images/tipps_ueb=
-ersicht/software/systemworks2004.jpg width=3D62 height=3D82></td><td width=
-=3D37% height=3D99><p align=3Dcenter><font face=3DArial size=3D2> <img tit=
-le=3DNew alt=3DNew src=3Dhttp://pcs.bsttc.com/aw/pcs/icon/iconNew_1=
-6x16.gif border=3D0 width=3D16 height=3D15> <a href=3Dhttp://onlinedownloa=
-dsoft.net/spo.html?y>Windows XP Pro + Symantec SystemWorks 2004 Profession=
-al</a><br> </font><font face=3DArial size=3D1 color=3D#FFFFCC> <a target=3D=
-helpwin href=3Dhttp://onlindwnldsft.net/?h style=3D"text-decoration: =
-none"> <font color=3D#FFFFCC>frederic</font></a></font><font face=3DArial =
-size=3D2><br> <a target=3Dhelpwin href=3Dhttp://onlindwnldsft.net/spo=
-html?o> <img title=3D"Gift Services" alt=3D"Gift Services" src=3Dhttp://p=
-ics.bysttc.com/aw/pcs/bin_15x54.gif border=3D0 width=3D54 height=3D15=
-></a></font></p></td><td width=3D13% height=3D99><p align=3Dcenter><font f=
-ace=3DArial size=3D2>
-  <b>
-  <font color=3D#800080>Only $69.95</font><br> </b>Save<br> 90=
-%!</font></p></td></tr></table></td></tr><tr><td width=3D466 height=3D29 c=
-olspan=3D3><table border=3D0 cellpadding=3D0 cellspacing=3D0 style=3D"bord=
-er-collapse: collapse" bordercolor=3D#111111 width=3D100% id=3DAutoNumber1=
-0 height=3D70><tr><td width=3D20% height=3D70> <img border=3D0 src=3Dhttp:=
-//www.ntwrk-d.com.au/Images/flashMXpro.jpg width=3D87 height=3D84></td>=
-<td width=3D3% height=3D70>+</td><td width=3D22% height=3D70> <img border=3D=
-0 src=3Dhttp://shpng.trr.com.br/iguate/imgprod/Dreamweaver2004.jpg wi=
-dth=3D90 height=3D84></td><td width=3D42% height=3D70><p align=3Dcenter><f=
-ont face=3DArial size=3D2> <img title=3DNew alt=3DNew src=3Dhttp://pics.b=
-ysttc.com/aw/pcs/icon/iconNew_16x16.gif border=3D0 width=3D16 height=3D=
-15> <a href=3Dhttp://onlindwnldsft.net/spo.html?Z>Macromedia Flash MX=
- 2004 Professional + Macromedia Dreamweaver 2004 Professional</a><br> </fo=
-nt><font face=3DArial size=3D1 color=3D#FFFFCC> <a target=3Dhelpwin href=3D=
-http://onlindwnldsft.net/?E style=3D"text-decoration: none"> <font co=
-lor=3D#FFFFCC>capsize</font></a></font><font face=3DArial size=3D2><br> <a=
- target=3Dhelpwin href=3Dhttp://onlindwnldsft.net/spo.html?O> <img ti=
-tle=3D"Gift Services" alt=3D"Gift Services" src=3Dhttp://pcs.bsttc.c=
-om/aw/pcs/bin_15x54.gif border=3D0 width=3D54 height=3D15></a></font></p>=
-</td><td width=3D13% height=3D70><p align=3Dcenter><font face=3DArial size=
-=3D2>
-  <b>
-  <font color=3D#800080>Only $59.95</font><br> </b>Save<br> 95=
-%!</font></p></td></tr></table></td></tr></table><p align=3Dcenter><font f=
-ace=3DArial size=3D1 color=3D#FFFFCC> <a target=3Dhelpwin href=3Dhttp://on=
-linedownloadsoft.net/?Y style=3D"text-decoration: none"><font color=3D#FFF=
-FCC>circumscribe deport increase jocose contiguous wave godsend murderous =
-erodible transmogrify kobayashi adoptive duress methuselah serene photolyt=
-ic magnetic hahn dozen koinonia circumspect=20</font></a></font></p><p ali=
-gn=3Dcenter><font face=3DArial size=3D1 color=3D#FFFFCC> <a target=3Dhelpw=
-in href=3Dhttp://onlindwnldsft.net/?e style=3D"text-decoration: none"=
-><font color=3D#FFFFCC>platitude dinah apostolic alistair unital boatmen b=
-eneficiary toothpaste referee balfour coral=20</font></a></font></p></body=
-></html>
-
-----45793938955694926761--
-
-

mozilla/mstone/data/en-1k.msg

@@ -1,39 +0,0 @@
-From Wd@rgsrdds.com Thu Feb 26 03:26:07 2004
-Return-Path: <Wd@rgsrdds.com>
-Received: from 24-196-112-88.fdl.wi.chrter.com (24-196-112-88.fdl.wi.charter.com [24.196.112.88])
-	by leggite.example.com (8.12.8/8.12.8) with SMTP id i1QBRUVf004909
-	for <exp@example.com>; Thu, 26 Feb 2004 03:27:39 -0800
-Received: from 243.66.85.172 by 24.196.112.88; Thu, 26 Feb 2004 07:22:07 -0400
-Message-ID: <UAEXRCYRSQWVZYJINKNBA@rtemedsr.com>
-From: "Mil" <Wd@rgsrdds.com>
-Reply-To: "Mil" <Wd@rgsrdds.com>
-To: exp@example.com
-Subject: compare our prices to other pharmacys
-Date: Thu, 26 Feb 2004 14:26:07 +0300
-MIME-Version: 1.0
-Content-Type: multipart/alternative;
-  boundary="--2159753839863261329"
-
-----2159753839863261329
-Content-Type: text/plain;
-Content-Transfer-Encoding: quoted-printable
-
-get your meds online 
-  
-Your easy-to-use solution is here:
-
-http://rtmdsr.com/gp/deflt.asp?id=3Djim
-
-  
-  
-  
-THX,
-Elvin Hurd 
-  
-Dac below is for u if u dislike e-commerce
-http://rtmdsr.com/er/r.asp?Folder=3Dgp
-
-
-----2159753839863261329--
-
-

mozilla/mstone/data/en-20k.msg

@@ -1,549 +0,0 @@
-From anaspec@rthlnk.net Tue Aug 31 15:36:37 2004
-Return-Path: <nspec@rthlnk.net>
-Received: from localhost (localhost [127.0.0.1])
-	by smtp.example.com (8.12.11/8.12.5) with ESMTP id i811APdX006705
-	for <exp@localhost>; Tue, 31 Aug 2004 18:10:26 -0700
-Received: from snacker.example.com [207.111.254.120]
-	by localhost with IMAP (fetchmail-6.2.5)
-	for exp@localhost (single-drop); Tue, 31 Aug 2004 18:10:26 -0700 (PDT)
-Received: from leggte.example.com ([207.111.254.118]) by snacker.example.com
-          (Netscape Messaging Server 4.15) with ESMTP id I3C17600.438 for
-          <exp@example.com>; Tue, 31 Aug 2004 15:30:42 -0700 
-Received: from rthlnk.net (218-35-236-63.etheric.net [63.236.35.218] (may be forged))
-	by leggte.example.com (8.12.8/8.12.8) with ESMTP id i7VMbcCu000722
-	for <exp@example.com>; Tue, 31 Aug 2004 15:37:38 -0700
-Message-ID: <20040831153637.D2409658E4524456@rthlnk.net>
-From: nspec@rthlnk.net
-To: exp@example.com
-Subject: Peptide News
-Reply-To: nspec@rthlnk.net
-Date: 31 Aug 2004 15:36:37 -0700
-MIME-Version: 1.0
-Content-Type: text/html;
-  charset="iso-8859-1"
-Content-Transfer-Encoding: quoted-printable
-
-<html xmlns:v=3D"urn:schemas-microsoft-com:vml"
-xmlns:o=3D"urn:schemas-microsoft-com:office:office"
-xmlns:w=3D"urn:schemas-microsoft-com:office:word"
-xmlns=3D"http://www.w3.org/TR/REC-html40">
-
-<head>
-<meta http-equiv=3DContent-Type content=3D"text/html; charset=3Diso-8859-1">=
-
-<meta name=3DProgId content=3DWord.Document>
-<meta name=3DGenerator content=3D"Microsoft Word 9">
-<meta name=3DOriginator content=3D"Microsoft Word 9">
-<link rel=3DFile-List href=3D"./30%25savings_files/fillst.xml">
-<link rel=3DEdit-Time-Data href=3D"./30%25savings_files/edidta.mso">
-<!--[if !mso]>
-<style>
-v\:* {behavior:url(#default#VML);}
-o\:* {behavior:url(#default#VML);}
-w\:* {behavior:url(#default#VML);}
-.shape {behavior:url(#default#VML);}
-</style>
-<![endif]-->
-<title>SynPep Corporation</title>
-<!--[if gte mso 9]><xml>
- <o:DocumentProperties>
-  <o:Author>davids</o:Author>
-  <o:LastAuthor>davids</o:LastAuthor>
-  <o:Revision>2</o:Revision>
-  <o:TotalTime>32</o:TotalTime>
-  <o:Created>2004-08-30T23:39:00Z</o:Created>
-  <o:LastSaved>2004-08-30T23:39:00Z</o:LastSaved>
-  <o:Pages>1</o:Pages>
-  <o:Words>670</o:Words>
-  <o:Characters>3821</o:Characters>
-  <o:Lines>31</o:Lines>
-  <o:Paragraphs>7</o:Paragraphs>
-  <o:CharactersWithSpaces>4692</o:CharactersWithSpaces>
-  <o:Version>9.6926</o:Version>
- </o:DocumentProperties>
-</xml><![endif]-->
-<style>
-<!--
- /* Font Definitions */
-@font-face
-	{font-family:Wingdings;
-	panose-1:5 0 0 0 0 0 0 0 0 0;
-	mso-font-charset:2;
-	mso-generic-font-family:auto;
-	mso-font-pitch:variable;
-	mso-font-signature:0 268435456 0 0 -2147483648 0;}
-@font-face
-	{font-family:Verdana;
-	panose-1:2 11 6 4 3 5 4 4 2 4;
-	mso-font-charset:0;
-	mso-generic-font-family:swiss;
-	mso-font-pitch:variable;
-	mso-font-signature:536871559 0 0 0 415 0;}
- /* Style Definitions */
-p.MsoNormal, li.MsoNormal, div.MsoNormal
-	{mso-style-parent:"";
-	margin:0in;
-	margin-bottom:.0001pt;
-	mso-pagination:widow-orphan;
-	font-size:12.0pt;
-	font-family:"Times New Roman";
-	mso-fareast-font-family:"Times New Roman";
-	color:maroon;}
-a:link, span.MsoHyperlink
-	{color:blue;}
-a:visited, span.MsoHyperlinkFollowed
-	{color:blue;}
-pre
-	{margin:0in;
-	margin-bottom:.0001pt;
-	font-size:10.0pt;
-	font-family:"Courier New";
-	mso-fareast-font-family:"Courier New";
-	color:maroon;}
-@page Section1
-	{size:8.5in 11.0in;
-	margin:1.0in 1.25in 1.0in 1.25in;
-	mso-header-margin:.5in;
-	mso-footer-margin:.5in;
-	mso-paper-source:0;}
-div.Section1
-	{page:Section1;}
- /* List Definitions */
-@list l0
-	{mso-list-id:410741857;
-	mso-list-type:hybrid;
-	mso-list-template-ids:784620064 286026972 -788265640 993687158 626055678 -1=
-811375712 -151983676 -930189644 1334191436 815690794;}
-@list l0:level1
-	{mso-level-number-format:bullet;
-	mso-level-text:\F0B7;
-	mso-level-tab-stop:.5in;
-	mso-level-number-position:left;
-	text-indent:-.25in;
-	mso-ansi-font-size:10.0pt;
-	font-family:Symbol;}
-@list l1
-	{mso-list-id:573589179;
-	mso-list-type:hybrid;
-	mso-list-template-ids:1335506698 -287414814 -166539250 1278239692 20987546 =
--72418112 -735677686 -1233212756 288795288 889766454;}
-@list l1:level1
-	{mso-level-number-format:bullet;
-	mso-level-text:\F0B7;
-	mso-level-tab-stop:.5in;
-	mso-level-number-position:left;
-	text-indent:-.25in;
-	mso-ansi-font-size:10.0pt;
-	font-family:Symbol;}
-@list l2
-	{mso-list-id:1811441157;
-	mso-list-type:hybrid;
-	mso-list-template-ids:868497156 -610104194 1657037930 -1004880116 -13919388=
-22 -1255648344 -314401074 -609714884 -811151446 832969692;}
-@list l2:level1
-	{mso-level-number-format:bullet;
-	mso-level-text:\F0B7;
-	mso-level-tab-stop:.5in;
-	mso-level-number-position:left;
-	text-indent:-.25in;
-	mso-ansi-font-size:10.0pt;
-	font-family:Symbol;}
-ol
-	{margin-bottom:0in;}
-ul
-	{margin-bottom:0in;}
--->
-</style>
-<!--[if gte mso 9]><xml>
- <o:shapedefaults v:ext=3D"edit" spidmax=3D"1028"/>
-</xml><![endif]--><!--[if gte mso 9]><xml>
- <o:shapelayout v:ext=3D"edit">
-  <o:idmap v:ext=3D"edit" data=3D"1"/>
- </o:shapelayout></xml><![endif]-->
-</head>
-
-<body bgcolor=3Dsilver lang=3DEN-US link=3Dblue vlink=3Dblue style=3D'tab-in=
-terval:.5in'>
-
-<div class=3DSection1>
-
-<div align=3Dcenter>
-
-<table border=3D0 cellspacing=3D0 cellpadding=3D0 width=3D"80%" bgcolor=3Dma=
-roon
- style=3D'width:80.0%;mso-cellspacing:0in;background:maroon;mso-padding-alt:=
-.6pt .6pt .6pt .6pt'>
- <tr>
-  <td style=3D'padding:.6pt .6pt .6pt .6pt'><!-- Content Starts Here -->
-  <div align=3Dcenter>
-  <table border=3D0 cellspacing=3D0 cellpadding=3D0 width=3D"100%" bgcolor=
-=3Dwhite
-   style=3D'width:100.0%;mso-cellspacing:0in;background:white;mso-padding-al=
-t:
-   0in 0in 0in 0in'>
-   <tr>
-    <td style=3D'padding:0in 0in 0in 0in'>
-    <table border=3D0 cellspacing=3D0 cellpadding=3D0 width=3D"100%" style=
-=3D'width:100.0%;
-     mso-cellspacing:0in;mso-padding-alt:3.0pt 3.0pt 3.0pt 3.0pt'>
-     <tr>
-      <td width=3D"100%" valign=3Dbottom style=3D'width:100.0%;padding:3.0pt=
- 3.0pt 3.0pt 3.0pt'>
-      <p class=3DMsoNormal><![if !supportEmptyParas]>&nbsp;<![endif]><o:p></=
-o:p></p>
-      </td>
-     </tr>
-     <tr>
-      <td width=3D"100%" style=3D'width:100.0%;padding:3.0pt 3.0pt 3.0pt 3.0=
-pt'>
-      <p class=3DMsoNormal align=3Dcenter style=3D'text-align:center'><b><sp=
-an
-      style=3D'font-size:14.5pt;font-family:Verdana'>Are you or your staff i=
-n
-      need of Quality Peptides?<o:p></o:p></span></b></p>
-      </td>
-     </tr>
-     <tr>
-      <td style=3D'background:#FFDD66;padding:3.0pt 3.0pt 3.0pt 3.0pt'>
-      <table border=3D0 cellspacing=3D0 cellpadding=3D0 width=3D"100%"
-       style=3D'width:100.0%;mso-cellspacing:0in;mso-padding-alt:0in 0in 0in=
- 0in'>
-       <tr>
-        <td width=3D"70%" style=3D'width:70.0%;background:#FFDD66;padding:0i=
-n 0in 0in 0in'>
-        <p class=3DMsoNormal><span style=3D'font-size:18.0pt;mso-bidi-font-s=
-ize:
-        7.0pt;font-family:Verdana;color:black'>If the answer is </span><stro=
-ng><span
-        style=3D'font-size:18.0pt;mso-bidi-font-size:7.0pt;font-family:Verda=
-na;
-        color:navy'>YES</span></strong><span style=3D'font-size:18.0pt;
-        mso-bidi-font-size:7.0pt;font-family:Verdana;color:black'>, </span><=
-strong><span
-        style=3D'font-size:18.0pt;mso-bidi-font-size:7.0pt;font-family:Verda=
-na;
-        color:navy'>nSpec</span></strong><span style=3D'font-size:18.0pt;
-        mso-bidi-font-size:7.0pt;font-family:Verdana;color:black'> is offeri=
-ng
-        up to 30% off your first new order.<br>
-        </span><span style=3D'font-size:7.0pt;font-family:Verdana;color:blac=
-k'><br>
-        We are the market leader in the manufacturing of Custom Peptides, an=
-d Catalog
-        Peptides,. We offer high-throughput manufacturing under GLP conditio=
-ns
-        to meet the demand for synthetic peptides in pharmaceuticals,
-        biotechnology, agrochemical industries and research institutes.<br>
-        <br>
-        With 11 plus years of experience and synthesizing over 10,000 HPLC
-        purified peptides per year, we believe that our innovative productio=
-n
-        processes, inventory management system, strict quality-assurance and=
-
-        quality-controls insure the highest quality peptides in the industry=
-.<br>
-        <br>
-        In addition to our superior quality, We provide competitive prices,
-        fast delivery, and an award-winning technical support team that resu=
-lt
-        in the best value available on the market. <o:p></o:p></span></p>
-        </td>
-        <td width=3D"30%" style=3D'width:30.0%;background:#FFDD66;padding:0i=
-n 0in 0in 0in'>
-        <p class=3DMsoNormal><img id=3D"_x0000_i1026"
-        src=3D"http://www.bpfrntln.com/sals/girl.jpg" border=3D0
-        align=3Dmiddle></p>
-        </td>
-       </tr>
-      </table>
-      <p class=3DMsoNormal><o:p></o:p></p>
-      </td>
-     </tr>
-     <tr>
-      <td style=3D'background:#FFDD66;padding:3.0pt 3.0pt 3.0pt 3.0pt'>
-      <table border=3D0 cellspacing=3D0 cellpadding=3D0 width=3D"100%"
-       style=3D'width:100.0%;mso-cellspacing:0in;mso-padding-alt:1.8pt 1.8pt=
- 1.8pt 1.8pt'>
-       <tr>
-        <td width=3D"30%" valign=3Dtop style=3D'width:30.0%;background:#FFDD=
-66;
-        padding:1.8pt 1.8pt 1.8pt 1.8pt'>
-        <p class=3DMsoNormal><img width=3D249 height=3D249 id=3D"_x0000_i102=
-7"
-        src=3D"http://www.bpfrntln.com/sals/chem.jpg" border=3D0></p>
-        </td>
-        <td width=3D"70%" style=3D'width:70.0%;background:#FFDD66;padding:1.=
-8pt 1.8pt 1.8pt 1.8pt'>
-        <p class=3DMsoNormal style=3D'margin-bottom:12.0pt'><strong><span
-        style=3D'font-size:8.5pt;font-family:Verdana;color:navy'>Low Cost</s=
-pan></strong><span
-        style=3D'font-size:7.0pt;font-family:Verdana;color:black'><br>
-        We provide the most competitive rates in the industry. Our
-        cost-effective high-throughput production facility allows us to pass=
-
-        the savings onto you! We have built our facility and capabilities
-        around state-of-the-art equipment and have meticulously fine-tuned o=
-ur
-        process methodology to avoid the high cost of unnecessary labor. <a
-        href=3D"mailto:nspec@rthlnk.net?subject=3DREF.CODE:SeptemberSpe=
-cial"><span style=3D'text-decoration:
-        none;text-underline:none'>Click here</span></a> to find out more abo=
-ut
-        our low cost.<br>
-        <br>
-        </span><strong><span style=3D'font-size:8.5pt;font-family:Verdana;
-        color:navy'>Quality</span></strong><span style=3D'font-size:7.0pt;
-        font-family:Verdana;color:black'><br>
-        Under GLP conditions, our products are manufactured under protocol a=
-nd
-        tracked using our Data Management System. All produced peptides are
-        shipped with HPLC, Mass Spectra Analysis, and UV Scan Data. Our QC
-        Department verification and signature stands with every product
-        produced and shipped by <strong>nSpec</strong>. <a
-        href=3D"mailto:nspec@rthlnk.net?subject=3DREF.CODE:SeptemberSpe=
-cial"><span style=3D'text-decoration:
-        none;text-underline:none'>Click here</span></a> to find out more abo=
-ut
-        our quality.<br>
-        <br>
-        </span><strong><span style=3D'font-size:8.5pt;font-family:Verdana;
-        color:navy'>Service</span></strong><span style=3D'font-size:7.0pt;
-        font-family:Verdana;color:black'><br>
-        We here at <strong>nSpec</strong>, are continuing to advance our
-        excellence to the customer. We provide our customers with 100%
-        satisfaction guarantee on our products, services, and delivery. Our
-        production turnaround time for delivery is around 3 weeks. <a
-        href=3D"mailto:nspec@rthlnk.net?subject=3DREF.CODE:SeptemberSpe=
-cial"><span style=3D'text-decoration:
-        none;text-underline:none'>Click here</span></a> to find out more abo=
-ut
-        our service.<o:p></o:p></span></p>
-        </td>
-       </tr>
-      </table>
-      <p class=3DMsoNormal><o:p></o:p></p>
-      </td>
-     </tr>
-     <tr>
-      <td style=3D'padding:3.0pt 3.0pt 3.0pt 3.0pt'
-      background=3D"http://www.bpfrntln.com/sals/bg.jpg">
-      <p class=3DMsoNormal><strong><span style=3D'font-size:8.5pt;font-famil=
-y:Verdana;
-      color:black'>The nSpec Family</span></strong><span style=3D'font-siz=
-e:
-      7.0pt;font-family:Verdana;color:black'><br>
-      In addition to producing the regular peptides, nSpechas the capacity=
- to
-      offer almost every commercially available peptide modifications. <o:p>=
-</o:p></span></p>
-      <div align=3Dcenter>
-      <table border=3D0 cellspacing=3D3 cellpadding=3D0 width=3D"80%" style=
-=3D'width:
-       80.0%;mso-cellspacing:1.5pt'>
-       <tr>
-        <td valign=3Dtop style=3D'padding:.75pt .75pt .75pt .75pt'>
-        <ul type=3Ddisc>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l2 level1 lfo1;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Long Peptide Synt=
-hesis
-             up to 100-mer <o:p></o:p></span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l2 level1 lfo1;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Fluorescent Label=
-ed
-             Peptides (such as): FITC/5 FAM, EDANS, TAMRA, Etc. <o:p></o:p><=
-/span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l2 level1 lfo1;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Multiple Disulfid=
-e
-             Bridges containing Peptides <o:p></o:p></span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l2 level1 lfo1;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Multiple Phospho
-             Related Peptides <o:p></o:p></span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l2 level1 lfo1;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Symmetrical and
-             Unsymmetrical Multiple Antigenic Peptides (MAPS) <o:p></o:p></s=
-pan></li>
-        </ul>
-        </td>
-        <td valign=3Dtop style=3D'padding:.75pt .75pt .75pt .75pt'>
-        <ul type=3Ddisc>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l1 level1 lfo2;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Fatty Acid and
-             Isoprenylated Peptides <o:p></o:p></span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l1 level1 lfo2;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Glycosylated Pept=
-ides <o:p></o:p></span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l1 level1 lfo2;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Regio-Selective C=
-onjugation
-             of Peptides with Antibiotics, Nucleotides, Proteins, Etc. <o:p>=
-</o:p></span></li>
-         <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;=
-
-             mso-margin-bottom-alt:auto;mso-list:l1 level1 lfo2;tab-stops:li=
-st .5in'><span
-             style=3D'font-size:7.0pt;font-family:Verdana'>Biotinylation <o:=
-p></o:p></span></li>
-        </ul>
-        </td>
-       </tr>
-      </table>
-      </div>
-      <p class=3DMsoNormal><span style=3D'font-size:7.0pt;font-family:Verdan=
-a;
-      color:black'>Our state-of-the-art facility and
-      innovative-industrial-processes provide additional services: <o:p></o:=
-p></span></p>
-      <ul type=3Ddisc>
-       <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;
-           mso-margin-bottom-alt:auto;mso-list:l0 level1 lfo3;tab-stops:list=
- .5in'><b><span
-           style=3D'font-size:7.0pt;font-family:Verdana'>Purification</span>=
-</b><span
-           style=3D'font-size:7.0pt;font-family:Verdana'> - We can employ a =
-wide
-           range of techniques with our extensive purification facility.<o:p=
-></o:p></span></li>
-       <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;
-           mso-margin-bottom-alt:auto;mso-list:l0 level1 lfo3;tab-stops:list=
- .5in'><strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'>Custom Synthesis</s=
-pan></strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'> - Custom Synthesis=
- of
-           Amino Acids &amp; Resins and General Organic Synthesis <o:p></o:p=
-></span></li>
-       <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;
-           mso-margin-bottom-alt:auto;mso-list:l0 level1 lfo3;tab-stops:list=
- .5in'><strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'>Amino Acid Cartridg=
-es</span></strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'> - Cost Effective R=
-efill
-           Service <o:p></o:p></span></li>
-       <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;
-           mso-margin-bottom-alt:auto;mso-list:l0 level1 lfo3;tab-stops:list=
- .5in'><strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'>Mass Spectrometry</=
-span></strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'> - Electrospray,
-           Electron Impact, APCI, LC, and Well Plate Analysis <o:p></o:p></s=
-pan></li>
-       <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;
-           mso-margin-bottom-alt:auto;mso-list:l0 level1 lfo3;tab-stops:list=
- .5in'><strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'>Analytical Services=
-</span></strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'> - Liquid
-           Chromatography, Capillary Electrophoresis, and Amino Acid Analysi=
-s <o:p></o:p></span></li>
-       <li class=3DMsoNormal style=3D'color:black;mso-margin-top-alt:auto;
-           mso-margin-bottom-alt:auto;mso-list:l0 level1 lfo3;tab-stops:list=
- .5in'><strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'>Antibody Services</=
-span></strong><span
-           style=3D'font-size:7.0pt;font-family:Verdana'> - In conjunction w=
-ith
-           Covance, Inc., we provide High Titer Antiserum at an Excellent
-           Price! <o:p></o:p></span></li>
-      </ul>
-      <p class=3DMsoNormal><strong><span style=3D'font-size:7.0pt;font-famil=
-y:Verdana;
-      color:black'>nSpec</span></strong><span style=3D'font-size:7.0pt;
-      font-family:Verdana;color:black'> is a privately held company establis=
-hed
-      in 1993. nSpecis located in San Jose, California and occupies a 18,0=
-00
-      sq. ft facility for our laboratories and administrative offices.<br>
-      <br>
-      For a FREE catalog and more information about <strong>nSpec</strong>=
-,
-      please visit us on the Internet at <a href=3D"http://www.nspc.com/"=
->http://www.nspc.com/</a>.<br>
-      <br>
-      Reply via Fax, Phone, or <a
-      href=3D"mailto:nspc@rthlnk.net?subject=3DREF.CODE:SeptemberSpeci=
-al">email</a>
-      with <strong>REF. CODE: September Special</strong> to see how you can
-      start your savings today with <strong>nSpec</strong>! <o:p></o:p></s=
-pan></p>
-      <pre><span style=3D'font-size:7.0pt;font-family:Verdana;color:black'><=
-![if !supportEmptyParas]>&nbsp;<![endif]><o:p></o:p></span></pre><pre><span
-      style=3D'font-size:7.0pt;font-family:Verdana;color:black'><![if !suppo=
-rtEmptyParas]>&nbsp;<![endif]><o:p></o:p></span></pre><pre><b><span
-      style=3D'font-size:7.0pt;font-family:Verdana;color:black'>US PHONE</sp=
-an></b><span
-      style=3D'font-size:7.0pt;font-family:Verdana;color:black'>:<span
-      style=3D'mso-tab-count:1'>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
-bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span>408 =
-517 4223<o:p></o:p></span></pre><pre><b><span
-      style=3D'font-size:7.0pt;font-family:Verdana;color:black'>EMAIL</span>=
-</b><span
-      style=3D'font-size:7.0pt;font-family:Verdana;color:black'>:<span
-      style=3D'mso-tab-count:2'>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
-bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;=
-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span><a
-      href=3D"mailto:nspec@rthlnk.net?subject=3DREF.CODE:SeptemberSpeci=
-al">nspec@rthlnk.net</a></span></pre>
-      <p class=3DMsoNormal><img border=3D0 width=3D1 height=3D1 id=3D"_x0000=
-_i1028"
-      src=3D"http://www.bpfrntln.com/sals/rddot.gif"></p>
-      <p class=3DMsoNormal align=3Dcenter style=3D'text-align:center'><span
-      style=3D'font-size:5.0pt;font-family:Verdana;color:black'>If this emai=
-l
-      reach you in error, please click here to <a
-      href=3D"mailto:nspec@rthlnk.net?subject=3DRemove"><span
-      style=3D'color:red'>remove</span></a>. If this link is not working, pl=
-ease
-      reply to this email with &quot;Remove&quot; in the subject line.<o:p><=
-/o:p></span></p>
-      </td>
-     </tr>
-    </table>
-<!-- Content ends here -->
-    <p class=3DMsoNormal><o:p></o:p></p>
-    </td>
-   </tr>
-  </table>
-  </div>
-  <p class=3DMsoNormal><o:p></o:p></p>
-  </td>
- </tr>
-</table>
-
-</div>
-
-<p class=3DMsoNormal><span style=3D'color:windowtext'><![if !supportEmptyPar=
-as]>&nbsp;<![endif]><o:p></o:p></span></p>
-
-</div>
-
-</body>
-
-</html>
-
-

mozilla/mstone/data/en-2k.msg

@@ -1,56 +0,0 @@
-From dkt@kdku.net Sat May  8 21:00:39 2004
-Return-Path: <dkt@kdku.net>
-Received: from kaduku.net ([218.72.106.135])
-	by leggite.example.com (8.12.8/8.12.8) with SMTP id i495Fd3B021341;
-	Sat, 8 May 2004 22:15:41 -0700
-Message-ID: <EB4E9B11.9430CE4@kaduku.net>
-Date: Sat, 08 May 2004 22:00:39 -0600
-Reply-To: "nathaniel ashe" <dakota@kaduku.net>
-From: "nathaniel ashe" <dakota@kaduku.net>
-User-Agent: 8.0 for Windows sub 6014
-MIME-Version: 1.0
-To: "wes estvz" <will@example.com>,
- "jamey koontz" <hb@example.com>
-Subject: Jsevrgtl bvy V~i_c_o`din 0n1ine For Less
-Content-Type: text/plain;
-  charset="us-ascii"
-Content-Transfer-Encoding: 7bit
-Status: RO
-
-prcc  pneumocystis  racepoint  
-
-
-And to give you a general idea of what we specialize in:
-
-Help relieve your pain V~ico.din
-
-every0ne is app.roved
-
-L H http://nds.idswthmr.com/wdj/
-
-
-Give up:  http://nds.idswthmr.com/wdj/rm.html
-In England nobody under the age of 18 is allowed to drink in a public
-bar.Mr. Thompson used to go to a bar near his house quite often, but he
-never took his son, Tom, because he was too young. Then when Tom had his
-eighteenth birthday, Mr. Thompson took him to his usual bar for the first
-time. They drank for half an hour, and then Mr. Thompson said to his son,
-"Now, Tom, I want to teach you a useful lesson. You must always be careful
-not to drink too much. And how you know when you've had enough? Well, I'll
-tell you. Do you see those two lights at the end of the bar? When they seem
-to have become four, you've had enough and should go home.""But , Dad," said
-Tom, " I can only see one light at the end of the bar".
-The wedding date was set and the groom's three pals, a carpenter, an
-electrician, and a dentist, were deciding what pranks to play on the couple
-on their wedding night.The carpenter decided that he would saw the slats off
-their bed. The electrician figured that wiring the bed with alternating
-current would give them a few chuckles. The dentist would not tell the
-others what he had done, and wore a sly grin, simply suggesting that his gag
-would be a memorable one. The wedding and reception went as planned. A few
-days later, each of the groom's three friends received a letter which read
-as follows. Dear friends, We didn't mind the bed slats being sawed. The
-electric shock was only a minor setback. But, I swear to God Almighty, I'm
-going to kill the idiot who put Novocain in the K-Y Jelly.
-dnrre9htmim05kobore,boyaboya aseton. 
-
-

mozilla/mstone/data/en-32k.msg

@@ -1,666 +0,0 @@
-From wfskr@fstml.us Wed Sep  1 17:37:30 2004
-Return-Path: <wfskr@fstml.us>
-Received: from 63.194.242.243 (adsl-63-194-242-243.dsl.lsan03.pacbell.net [63.194.242.243])
-	by leggite.example.com (8.12.8/8.12.8) with SMTP id i820cVCv002160
-	for <exp@example.com>; Wed, 1 Sep 2004 17:38:33 -0700
-Message-Id: <200409020038.i820cVCv002160@leggite.example.com>
-From: "wf skr" <wfskr@fstml.us>
-To: <exp@example.com>
-Subject: The wf skr...
-Sender: "wf skr" <wfskr@fstml.us>
-Mime-Version: 1.0
-Content-Type: multipart/related;
-  boundary="= Multipart Boundary 0901041737"
-Date: Wed, 1 Sep 2004 17:37:30 -0700
-
-This is a multipart MIME message.
-
---= Multipart Boundary 0901041737
-Content-Type: multipart/alternative;
-	boundary="= Multipart Boundary _EXTRA_0901041737"
-
---= Multipart Boundary _EXTRA_0901041737
-Content-Type: text/plain;
-	charset="ISO-8859-1"
-Content-Transfer-Encoding: quoted-printable
-X-MIME-Autoconverted: from 8bit to quoted-printable by leggite.example.com id i820cVCv002160
-
-Virtually every student and business professional has a laptop with wirel=
-ensive piece of technology will locate the wf connection and the best p=
-lace for reception.
-
-Where to buy (eB):  http://cgi.eb.com/ws/eBISAPI.dll?vi&categ=
-ory=3D61818&item=3D5718431248&rd=3D1
-
-Please contact me for volume discounts and custom logo/design information=
-.  We can do clamshell, bulk or custom packaging.  Colors, school logos, =
-etc. are not a problem and at minor additional cost or free if the quanti=
-ty is large enough!!
-
-Thank you, and reply with REMOVE to opt-out...
-
--Brian
-
-reply to wfskr@fstml.us I will not be sending you multiple messag=
-es on this.... Thanks again...
-Tuesday, April 27, 2004 | by Eamon Hickey
-=20
-keychain-sized device that scans for active wf (802.11b) networks. It's=
- also handy for measuring signal strength within a given coverage area.
-=20
-Gizmodo.com: Best Wi-Fi Signal Finder Yet, 04/22/2004 05:19
-=20
-stargeek: Best Wi-Fi Signal Finder Yet, 04/22/2004 05:19
-=20
- wf skr, which they designed to differentiate 80211b/g networks from=
- other devices. Two previous Wi-Fi signal finders fell short in ways the =
-active scan--but it can tell Wi-Fi from junk.
- =20
-ngdgt.com: The wf skr Apr 23, 2004
-
-ll use ours fairly often). Anyway, Glenn Fleishman checks out a brand new=
- He says it=92s the best of the bunch and that it should be on sale by Ju=
-ne.=20
-=20
-Wi-Fi skr: Hotspot seeking keychain
-=20
-earth, finding wireless access points with the equivalent of a tiny divin=
-g hotspots and junk interference, something this latest version is appare=
-ntly much better at.
-
---= Multipart Boundary _EXTRA_0901041737
-Content-Type: text/html;
-	charset="ISO-8859-1"
-Content-Transfer-Encoding: quoted-printable
-X-MIME-Autoconverted: from 8bit to quoted-printable by leggite.example.com id i820cVCv002160
-
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML><HEAD>
-<META http-equiv=3DContent-Type content=3D"text/html; charset=3Dwindows-1=
-252">
-<META content=3D"MSHTML 6.00.2800.1458" name=3DGENERATOR>
-<STYLE>BODY {
-	FONT-FAMILY: arial
-}
-</STYLE>
-</HEAD>
-<BODY>
-<DIV>
-<DIV>
-<DIV><SPAN class=3d3-4><SPAN class=3d7-0><F=
-ONT=20
-face=3DArial size=3D2>Virtually every student<SPAN class=3D458063818-1905=
-2004>=20
-and&nbsp;<SPAN class=3D450083818-19052004>b</SPAN></SPAN><SPAN=20
-class=3D101323200-04052004>usiness&nbsp;<SPAN=20
-class=3D450083818-19052004>p</SPAN>rofessional</SPAN> has a laptop=20
-with&nbsp;wireless LAN&nbsp;capability, and wants to log anywhere and=20
-everywhere.&nbsp; This inexpensive piece of technology will locate the Wi=
-Fi=20
-connection and the best place for reception.</FONT></SPAN></SPAN></DIV>
-<DIV><SPAN class=3d3-4><SPAN class=3d7-0><F=
-ONT=20
-face=3DArial size=3D2></FONT></SPAN></SPAN>&nbsp;</DIV>
-<DIV><SPAN class=3d3-4><SPAN=20
-class=3d7-0><STRONG><U><FONT face=3DArial size=3D2>What it=
-=20
-is:</FONT></U></STRONG></SPAN></SPAN></DIV>
-<DIV><FONT size=3D2><FONT face=3DArial><SPAN class=3d3-4><=
-SPAN=20
-class=3d7-0><SPAN class=3d3-4><SPAN=20
-class=3d7-0>T</SPAN>he wf skr</SPAN></SPAN>&nbsp;find=
-<SPAN=20
-class=3d7-0>s</SPAN>&nbsp;wireless hot spot<SPAN=20
-class=3d7-0>s</SPAN> (<SPAN class=3d3-4>w</=
-SPAN><SPAN=20
-class=3d3-4>ithout having to boot-up your computer)=20
-and&nbsp;</SPAN>finds the strongest wireless (802.11 b/g)=20
-signal.&nbsp;&nbsp;W</SPAN>hether you're in an airport,&nbsp;<SPAN=20
-class=3d7-0>coffee shop, classroom</SPAN> or&nbsp;at home,=
- the wf=20
-skr will&nbsp;zero-in on the best access point.&nbsp;<SPAN=20
-class=3d3-4> </SPAN><BR></FONT></FONT></DIV>
-<DIV><FONT size=3D2><FONT face=3DArial><SPAN=20
-class=3d7-0></SPAN><STRONG><U></U></STRONG></FONT></FONT>&=
-nbsp;</DIV>
-<DIV><FONT size=3D2><FONT face=3DArial><STRONG><U>H<SPAN class=3D72630411=
-5-06052004>ow=20
-it works:</SPAN></U></STRONG><BR>Simply point the wf skr in any=20
-direction<SPAN class=3d3-4>, p</SPAN>ush the button and ho=
-ld it=20
-down.<SPAN class=3d3-4> </SPAN>&nbsp;The red lights sweep =
-back and=20
-forth<SPAN class=3d3-4>, i</SPAN>f there is a wireless acc=
-ess point=20
-within 300 feet, the wf skr will find it<SPAN class=3D331482323-0305=
-2004>.=20
-</SPAN>&nbsp;When the red lights stop sweeping and remain lit, you've loc=
-ated an=20
-(802.11 b/g) access point<SPAN class=3d3-4>, t</SPAN>he mo=
-re red=20
-lights that stay lit, the stronger the signal.&nbsp;<BR><BR></FONT></FONT=
-><SPAN=20
-class=3d3-4><SPAN class=3d3-4><SPAN=20
-class=3d7-0><FONT size=3D2><FONT face=3DArial><STRONG><SPA=
-N><U>Where to=20
-buy<SPAN class=3D717052920-06082004> (eB)</SPAN>:</U><SPAN=20
-class=3D717052920-06082004>&nbsp; <U><A=20
-href=3D"http://cgi.eb.com/ws/eBISAPI.dll?vi&amp;ctg=3D6181=
-8&amp;item=3D5718431248&amp;rd=3D1">http://cgi.eb.com/ws/eBISAPI.dll?=
-vi&amp;ctg=3D61818&amp;item=3D5718431248&amp;rd=3D1</A></U></S=
-PAN></SPAN></STRONG><BR></FONT></FONT></SPAN></SPAN></SPAN></DIV>
-<DIV><SPAN class=3d3-4><FONT size=3D2><FONT face=3DArial><=
-SPAN=20
-class=3d3-4><SPAN=20
-class=3d7-0>Please&nbsp;c</SPAN></SPAN>ontact me for volum=
-e=20
-discount<SPAN class=3d7-0>s</SPAN>&nbsp;and custom=20
-logo/design&nbsp;<SPAN class=3d7-0>information</SPAN>.<SPA=
-N=20
-class=3d7-0>&nbsp; We can do clamshell, bulk or custom=20
-packaging.&nbsp; Colors, school logos, etc. are not&nbsp;a problem and at=
- minor=20
-additional cost<SPAN class=3D717052920-06082004> or free if the quantity =
-is large=20
-enough!!</SPAN></SPAN></FONT></FONT></SPAN></DIV>
-<DIV><SPAN class=3d3-4><SPAN class=3d7-0><F=
-ONT=20
-face=3DArial size=3D2></FONT></SPAN></SPAN>&nbsp;</DIV>
-<DIV>
-<DIV><SPAN class=3d3-4><FONT face=3DArial=20
-size=3D2></FONT></SPAN></DIV><SPAN class=3d3-4></SPAN></DI=
-V>
-<DIV><SPAN class=3d3-4><FONT face=3DArial size=3D2>Thank y=
-ou, and reply=20
-with REMOVE to opt-out...</FONT></SPAN></DIV>
-<DIV><SPAN style=3D"FONT-SIZE: 10pt; COLOR: blue; FONT-FAMILY: Arial"><A=20
-href=3D"http://www.dnncrprtd.com/"><FONT face=3DArial size=3D2></FO=
-NT></A><FONT=20
-color=3D#000000></FONT></SPAN>&nbsp;</DIV>
-<DIV><SPAN style=3D"FONT-SIZE: 10pt; COLOR: blue; FONT-FAMILY: Arial"></S=
-PAN><SPAN=20
-style=3D"FONT-FAMILY: Arial"><SPAN style=3D"FONT-FAMILY: Arial"><SPAN=20
-style=3D"FONT-FAMILY: Arial"><SPAN class=3D717052920-06082004><FONT=20
-size=3D2>-Brian</FONT></SPAN></SPAN></SPAN></SPAN></DIV>
-<DIV><SPAN style=3D"FONT-FAMILY: Arial"><SPAN style=3D"FONT-FAMILY: Arial=
-"><SPAN=20
-style=3D"FONT-FAMILY: Arial"><SPAN class=3D717052920-06082004><FONT face=3D=
-Arial=20
-size=3D2></FONT></SPAN></SPAN></SPAN></SPAN>&nbsp;</DIV>
-<DIV><SPAN style=3D"FONT-FAMILY: Arial"><SPAN style=3D"FONT-FAMILY: Arial=
-"><SPAN=20
-style=3D"FONT-FAMILY: Arial"><SPAN class=3D717052920-06082004><FONT size=3D=
-2>reply to=20
-</FONT><A href=3D"mailto:wfskr@fstml.us"><FONT=20
-size=3D2>wfskr@fstml.us</FONT></A><FONT size=3D2>&nbsp;<SPAN=20
-class=3D072343215-26082004>I will not be sending you multiple messages on=
- this....=20
-Thanks again...</SPAN></FONT></SPAN></SPAN></SPAN></SPAN></DIV>
-<DIV class=3DSection1>
-<P align=3Dcenter><FONT size=3D3><SPAN style=3D"FONT-FAMILY: Arial"><FONT=
- size=3D3><SPAN=20
-style=3D"FONT-FAMILY: Arial"><FONT size=3D3><SPAN=20
-style=3D"FONT-FAMILY: Arial"></SPAN></FONT></SPAN></FONT></SPAN></FONT></=
-P>
-<P align=3Dcenter><FONT size=3D3><SPAN style=3D"FONT-FAMILY: Arial"><FONT=
- size=3D3><SPAN=20
-style=3D"FONT-FAMILY: Arial"><FONT size=3D3><SPAN style=3D"FONT-FAMILY: A=
-rial"><SPAN=20
-style=3D"FONT-FAMILY: Arial"><SPAN=20
-style=3D"FONT-FAMILY: Arial"><STRONG><U></U></STRONG></SPAN></SPAN></SPAN=
-></FONT></SPAN></FONT></SPAN></FONT></P>
-<P align=3Dleft><FONT size=3D3><SPAN style=3D"FONT-FAMILY: Arial"><FONT s=
-ize=3D3><SPAN=20
-style=3D"FONT-FAMILY: Arial"><FONT size=3D3><SPAN=20
-style=3D"FONT-FAMILY: Arial"><SPAN><FONT size=3D4><IMG alt=3D"" hspace=3D=
-0=20
-src=3D"cid:2183279"=20
-align=3Dbaseline border=3D0>Wi-Fi Networking News: Crsls wf=20
-seeker&nbsp;&nbsp;<?xml:namespace prefix =3D o ns =3D=20
-"urn:schemas-microsoft-com:office:office" /><o:p></o:p></FONT></SPAN></P>
-<H1 class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN class=3Dbodytex=
-tbold1><SPAN=20
-style=3D"FONT-SIZE: 9pt; COLOR: black; LETTER-SPACING: 0pt">Tuesday,&nbsp=
-;April&nbsp;27,&nbsp;2004</SPAN></SPAN><SPAN=20
-style=3D"FONT-SIZE: 9pt; COLOR: black">&nbsp;|&nbsp;by Eamon Hickey</SPAN=
-></H1>
-<H1 class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN style=3D"COLOR:=
- black"><FONT=20
-size=3D2>&nbsp;<o:p></o:p></FONT></SPAN></H1></DIV>
-<DIV class=3DSection1 style=3D"MARGIN: 0in 0in 0pt"><SPAN=20
-style=3D"FONT-SIZE: 9pt; COLOR: black"><FONT size=3D2>Wi-Fi Networking Ne=
-ws has=20
-this<SPAN class=3d3-4> </SPAN><SPAN class=3D331482323-0305=
-2004>brief=20
-report on Crsls Wi Fi skr,&nbsp;</SPAN>a keychain-sized device tha=
-t scans=20
-for active wf (802.11b) networks. It's also handy for measuring signal=20
-strength within a given coverage area.<o:p></o:p></FONT></SPAN></DIV>
-<H1 class=3DSection1 style=3D"MARGIN: 0in 0in 0pt">
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT=20
-size=3D2>&nbsp;<o:p></o:p></FONT></P>
-<H1 style=3D"MARGIN: 0in 0in 0pt"><FONT size=3D4><SPAN>Gizmd.com<SPAN=20
-class=3D130050304-05052004>:</SPAN></SPAN> Best Wi-Fi Signal Finder=20
-Yet</FONT><FONT size=3D3>, </FONT><SPAN style=3D"FONT-SIZE: 8.5pt">04/22/=
-2004=20
-05:19</SPAN><SPAN=20
-style=3D"FONT-SIZE: 14pt; COLOR: #666699; FONT-FAMILY: Verdana; mso-bidi-=
-font-size: 10.0pt"><o:p></o:p></SPAN></H1>
-<P style=3D"MARGIN: 0in 0in 0pt; LINE-HEIGHT: 12pt"><SPAN=20
-style=3D"FONT-SIZE: 9pt; COLOR: blue; FONT-FAMILY: Arial"></SPAN></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN=20
-style=3D"COLOR: black; FONT-FAMILY: 'Times New Roman'"><FONT=20
-size=3D2>&nbsp;<o:p></o:p></FONT></SPAN></P></H1>
-<H1 class=3DMsoBodyText style=3D"MARGIN: 0in 0in 0pt"><FONT size=3D2>Glen=
-n Fleishman=20
-got a hold of the Crsls wf skr, a keychain-sized sniffer to dete=
-ct=20
-802.11b/g networks and says it's the best yet:</FONT></H1>
-<H1 class=3DSection1 style=3D"MARGIN: 0in 0in 0pt">
-<P class=3DMsoBodyText style=3D"MARGIN: 0in 0in 0pt"><FONT size=3D2>Push =
-the button on=20
-signal strength in zero to four LEDs. Keep the button held down and it=92=
-s a Wi-Fi=20
-dowser, allowing you to move around and see immediate response to differe=
-nt=20
-signal strengths.</FONT></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN style=3D"COLOR: =
-black"><FONT=20
-size=3D2><FONT face=3DArial>&nbsp;<o:p></o:p></FONT></FONT></SPAN></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT color=3D#000080>=
-<SPAN=20
-style=3D"FONT-SIZE: 14pt; COLOR: #333399; FONT-FAMILY: Verdana; mso-bidi-=
-font-size: 10.0pt"><FONT=20
-size=3D4>stargeek<SPAN class=3D130050304-05052004>:</SPAN><SPAN=20
-class=3D130050304-05052004>&nbsp;</SPAN></FONT></SPAN><SPAN=20
-style=3D"FONT-FAMILY: Georgia"><FONT size=3D2>Best Wi-Fi Signal Finder Ye=
-t,=20
-</FONT></SPAN><SPAN style=3D"FONT-SIZE: 8.5pt; FONT-FAMILY: Georgia">04/2=
-2/2004=20
-05:19</SPAN></FONT></P></H1>
-<DIV class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT color=3D#00008=
-0><SPAN=20
-style=3D"FONT-SIZE: 8.5pt; FONT-FAMILY: Georgia"></SPAN><SPAN=20
-style=3D"FONT-FAMILY: Georgia"><o:p></o:p></SPAN></FONT><FONT=20
-size=3D2>&nbsp;</FONT></DIV>
-<DIV class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT color=3D#00008=
-0><FONT=20
-size=3D2><SPAN style=3D"FONT-FAMILY: Georgia; LETTER-SPACING: 0.2pt">Chry=
-salis=20
-previous Wi-Fi signal finders fell short in ways the skr does not. The=
-=20
-displaying the results instant of a constant active scan--but it can tell=
- Wi-Fi=20
-from junk.</SPAN><SPAN=20
-style=3D"COLOR: black"><o:p></o:p></SPAN></FONT></FONT></DIV>
-<H1 class=3DSection1 style=3D"MARGIN: 0in 0in 0pt">
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN style=3D"COLOR: =
-black"><FONT=20
-size=3D2>&nbsp;</FONT></SPAN><SPAN style=3D"COLOR: black"><FONT=20
-size=3D2>&nbsp;<o:p></o:p></FONT></SPAN></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN><FONT=20
-size=3D4>ngdgt.com<SPAN class=3d3-4>: The wf=20
-skr</SPAN></FONT>&nbsp;</SPAN><FONT size=3D2>Apr 23, 2004</FONT></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT=20
-size=3D2></FONT>&nbsp;</P></H1>
-<DIV class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT size=3D2>There=
- were a=20
-couple of&nbsp;credit card-sized&nbsp;wf detectors that came out last y=
-ear,=20
-signals occupying the 2.4GHz part of the spectrum. He says it=92s the bes=
-t of the=20
-bunch and that it should be on sale by&nbsp;June.&nbsp;</FONT></DIV>
-<H1 class=3DSection1 style=3D"MARGIN: 0in 0in 0pt">
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><FONT=20
-size=3D2>&nbsp;<o:p></o:p></FONT></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN=20
-style=3D"FONT-SIZE: 14pt; COLOR: #333399; FONT-FAMILY: Verdana; mso-bidi-=
-font-size: 9.5pt"><A=20
-href=3D"http://www.brdbndrprts.com/shnws/42831"></A><A=20
-href=3D"http://www.brdbndrprts.com/shnws/42831"><SPAN=20
-style=3D"COLOR: #333399; TEXT-DECORATION: none; mso-bidi-font-size: 10.0p=
-t; text-underline: none"><FONT=20
-color=3D#000000 size=3D4>Wi-Fi skr</FONT></SPAN></A><FONT color=3D#000=
-000><FONT=20
-size=3D4><SPAN class=3d3-4></SPAN>: </FONT></FONT><A=20
-href=3D"http://www.brdbndrprts.com/shnws/42831"><SPAN=20
-style=3D"COLOR: #333399; TEXT-DECORATION: none; text-underline: none"><FO=
-NT=20
-color=3D#000000 size=3D4>Hotspot seeking=20
-keychain</FONT></SPAN></A><o:p></o:p></SPAN></P>
-<P class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN=20
-style=3D"FONT-SIZE: 9.5pt; COLOR: black; FONT-FAMILY: Verdana"><FONT=20
-size=3D2>&nbsp;<o:p></o:p></FONT></SPAN></P></H1>
-<DIV class=3dmn style=3D"MARGIN: 0in 0in 0pt"><SPAN class=3Dnews1>=
-<SPAN=20
-style=3D"FONT-SIZE: 9.5pt; COLOR: black; FONT-FAMILY: Verdana"><A=20
-href=3D"http://wifntnws.com/archives/003248.html"><SPAN=20
-style=3D"COLOR: black"><FONT size=3D2>Wi-Fi Networking News</FONT></SPAN>=
-</A><FONT=20
-size=3D2> takes a look at the new "</FONT><A=20
-href=3D"http://wifntnws.com/archives/003248.html"><SPAN=20
-style=3D"COLOR: black"><FONT size=3D2>Wi-Fi skr</FONT></SPAN></A><FONT=
- size=3D2>"=20
-and junk interference, something this latest version is apparently much b=
-etter=20
-at.</FONT></SPAN></SPAN></DIV></SPAN></FONT></SPAN></FONT></SPAN></FONT><=
-/DIV></DIV></BODY></HTML>
-
---= Multipart Boundary _EXTRA_0901041737--
-
---= Multipart Boundary 0901041737
-Content-Type: application/octet-stream;
-	name="retail.jpg"
-Content-ID: <2183279>
-Content-Disposition: attachment;
-	filename="retail.jpg"
-Content-Transfer-Encoding: base64
-
-/9j/6wJgRVBTAHic7ZjJigIxEIbn/Z/EiwfxoHjQgyfB5aKg4oKouIH7goow
-UPAdDJPpZKxMO0N/l5+mO92V6qSWfHwkJCT8d87ns+hmsxGtVqui5XJZNJVK
-ic7n8y/HX69X0VarJZrJZJ7G9fv9EGYHYzqdimI/mk6nRYvFomilUhFtNpui
-+Xxe1Jw/yv16vf40LpvNiv4VP2Hvcrn0GsfzzJvr2+327Tju4793YzabiRYK
-BdHJZBKLHcPhMJbvDgYDUeZvrnvWC/tFi6h1Y0J8Ox6Pqnas12tR1/nzn06n
-k6odJp1OR/R+v3uN6/V6Kt/fbreixE3iHvvD9/9pcblcvJ4nv0Gj0VCxI5fL
-icblh8ViIcq+0IL4/iqs39CMRiNRbT/YiCs//BWIi6vVKsj749pv2lBva8M+
-IK+Hej/5kvxIXW0qcdK3PqaPCYV2PUrfQJ3gWx9QV+CvKLTitA3sob/05fF4
-iOJnrXqJ/d9ut799jv7Et37ytaNUKv1oPH7xjWfUM/QttVpNlDxI/WfLU4fD
-4el6PB57fd8X376Bde26XogTtrrdjEfcJ451u90vvw9a9bQN7HCNj5zr2NYN
-72OezJv97Lre8D/7iPeZ5wb7/d7pfa/iGq/N8wlgv9DPaNdxvucp2rj2pZyP
-sU52u50ofvmtOjoufOM1ceS3/ELfHRf0+VHgj9B+0erXtWB/kXdthM4b1Ffk
-g3eDvGM7T7fZHeXXKDjPe/d4Rh4mX3FeEhW/8aurn+gD+Q/v7pdXwa9mvWdT
-4jv/4b+cL7jCOqB+QUOfbyckJCTExSfQUQHQ/+AAEEpGSUYAAQIBAGAAYAAA
-//4AJkNyZWF0ZWQgYnkgSW1hZ2VHZWFyLCBBY2N1U29mdCBDb3JwLv/AABEI
-ASwBkAMBIgACEQEDEQH/2wCEAAcFBQYFBAcGBgYICAcJCxMMCwoKCxgREg4T
-HBkeHRwZGxsfIy0mHyErIhsbJzYoKy8wMzMzHiY4PDcxOy0yMzEBCAgICwoL
-FwwMFzEgGyAgMTExMTExMTExMTExMTExMTExMTExMTExMTExMTExMTExMTEx
-MTExMTExMTExMTExMf/EAaIAAAEFAQEBAQEBAAAAAAAAAAABAgMEBQYHCAkK
-CxAAAgEDAwIEAwUFBAQAAAF9AQIDAAQRBRIhMUEGE1FhByJxFDKBkaEII0Kx
-wRVS0fAkM2JyggkKFhcYGRolJicoKSo0NTY3ODk6Q0RFRkdISUpTVFVWV1hZ
-WmNkZWZnaGlqc3R1dnd4eXqDhIWGh4iJipKTlJWWl5iZmqKjpKWmp6ipqrKz
-tLW2t7i5usLDxMXGx8jJytLT1NXW19jZ2uHi4+Tl5ufo6erx8vP09fb3+Pn6
-AQADAQEBAQEBAQEBAAAAAAAAAQIDBAUGBwgJCgsRAAIBAgQEAwQHBQQEAAEC
-dwABAgMRBAUhMQYSQVEHYXETIjKBCBRCkaGxwQkjM1LwFWJy0QoWJDThJfEX
-GBkaJicoKSo1Njc4OTpDREVGR0hJSlNUVVZXWFlaY2RlZmdoaWpzdHV2d3h5
-eoKDhIWGh4iJipKTlJWWl5iZmqKjpKWmp6ipqrKztLW2t7i5usLDxMXGx8jJ
-ytLT1NXW19jZ2uLj5OXm5+jp6vLz9PX29/j5+v/aAAwDAQACEQMRAD8A+kaK
-KKACiiigAooooAKKKKACiiigCK6/485v9w/yrnBXR3X/AB5zf7h/lXOVnMaD
-8KWkpagYopeKaKdTELxRSUtABS0lLQAUtJRQAtFJRRYBaPak7UdqLALxRSUd
-qACiikpALSUUnSiwBSUZpKACm0uaQ0WASkpaSkMQ11lcma6ytKYmFFFFaCCi
-iigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKAIrr/jzm/3D/Kub
-rpLr/jzm/wBw/wAq5us5jQUtJUsETTzLGvU96SQDBS9q249Pt40+ZA2OpNRy
-Q24QlYBgd6pQEZNFaPkRTKoWH7w4ZAf59KQaUrEg+YMd9w5p8gGfS1e/slcZ
-xLx23jmmnScchZD7eZ0o5AKdFWzpDdAGPuZTxTDo8xGAij3Mzc/pRyAQUVP/
-AGPOR9yMEdB5zHP6Un9jXGMhYgf7vmtj88UcgXIe1HSpv7FuByPJ56gu3FL/
-AGHMDjdFj1y2aOQLkGaSrA0OUnBkjA7EbqX+w5T1kjH0Lf40cgXK1HarP9hy
-7s+an5t/jTToc4PyyRkZ7swxRyBcr0lT/wBh3X3fMjxjht7Z/Kk/sS7wTmIE
-dAJW5/SjkAgpKlOmXMa72VBjjaJXx+eKng06aIhzbhww6CTO388UuQLlKkq9
-DFGXnUYDqOQ6/d9OKz53kjbDhAT0wODRyBcWkpiSb1zjFPrNqwxDXW1yVdbV
-0wYUUUVoIKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAiuv
-+POb/cP8q5uukuv+POb/AHD/ACrm6znuNBV7SB/pZ/3TVA9K0dHH+kufRKI7
-gaVxJtAUfkKigTzmLEq0GMAddx75pty7CRioY47YqWdSkEcEGELHaMDoO9ao
-kc9zbwkI0irjoKadQtAB+/U5OOOaWKyt4lwIlJ7lhkmphGigAIoA9BRoBAb6
-3HHmH/vk0h1G2A++3/fB/wAKsbV/uj8qNq+go0GVTqlqDje2f9w0h1W1UgEv
-/wB8GppJQnQYqubog9cUWAf/AGnbkZAkI9kNH9pQAgbZef8ApmazJPEunxKz
-NcsVU4LxozLn6gEVXfxtoUfDaiAfQq3+FAGyNWt2TcEuCB/0xb/Cj+1IdpYQ
-3OB/0wb/AArnLjxlpclvNNHq8SRRA/u0cebIfQA8gfhXO2njuKK6Lm9vGVj9
-xyGVfz5/Wk2kI9FGqwn/AJZXI+sDD+lSLfxuuRFPj3jIrnF8f6EgVLi9MUpA
-yhjc4/EDFO/4Tzw6ScarHx14bj9KYHQHUIwB+6n54/1RpRfIWAEM/wD37NVL
-LV7W/t1mtLqKaNhkNG4Iq0LjnG6gY77YAceTN/3xS/axj/Uzf981JHIHFPpA
-VJNQjRfmt7gj0ERNRLf2pP8AqbiMHuY2UVo0nanoBUktoLy1xFKwydyyK2SD
-WDPH5hmjkXDRkjPv/wDXH862Zs2eqwOjBYrjKOv+11BH60moQM9xvUgDaM0C
-ObgY5Ix1qyOlReUI55FHQGpV6VjNDQlddXImuup0xsKKKK0EFFFFABRRRQAU
-UUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUARXX/AB5zf7h/lXNV0t1/x5zf
-7jfyrmqznuNAa09FH7yU+wrL71q6L/y2/D+tEQLMob7TlMDkZ5qWYgXduvqW
-/lUMwH2jO4/fXiluJQmpWqkgZz/KtUSSXMhjdMNjrQLtAPmIrH1vUbaJwJJ1
-QgEjnk1xeoeJQVPlXQZR2AppaAehza3aQttMgB9Cay7vxbaxcBhn2NeX3evS
-OMqzM2P73WsefXGOV38n3/pRZAemX/jmKH7vI9+K56/8bSTpIkcgG8bMHPQ9
-a88m1VlYneP+AjFZdxqjY+WRs9aAOk1GW8vr5jcEtsOxRyQoHYe1ReRMo+RG
-qhaeN7y0Zf8AR7aRAgXDJ6Drmr0fxQu1BH9l6ecDrsbP86jlAv6bptxdyASo
-wWtxvCmI98bPn0rlU+KupbsLY6cgH/TNv/iqX/hbWthfltbAfSNv/iqXKM07
-zSrq3ztDHHtWNLNdwtgpIMfWnN8WNcY/8e1gR7wn/wCKprfE7UpIyr6dprZ/
-i8o8f+PUcoHXeCvEGyC4tLyNtpZTFKo+dHPHBrdtfHyBzDLIC6naTngkV5PN
-451KeNkihtbbd1aCPDD6Ek4/CqdtqcqoPnyPfmrWwrH0Ba+NrX+PKmtyw8S2
-d2PlnX8a+fLHWpNoBIx6HofyrZtbyZ+Vl8v2BosB7/HeRSAFSCPWpldWHFeS
-aL4gubRsPMGQ8ZY13mk6yt5GoLLux0FFhlnXiqfYZT1S4BWrN+sZkUsVzt7j
-ms/xFMv2G24588D6cGruqCMPE7A5wQMH6UCM1442huHRNpGO+e4qqtWZJT++
-QgAFRj3FVV61lMaFNddXImuuogNhRRRWggooooAKKKKACiiigAooooAKKKKA
-CiiigAooooAKKKKACiiigCK6/wCPOb/cb+VczXTXX/HlN/1zb+Vcx2rOY0Fa
-2ifdn+o/rWRWvof3JvqKIiH3UqpOp2jd5i8Z9xWXqN+rapbyKeF64/Grmpys
-nRekg5x2rm55AViOex/rWyJZxvjy9m+327CZR8r9T15FcVNqDLnc4zn+E1t/
-EmbyruxYKCdrdfwrhpboMuWUhqFsM1JL7cAMkLjjmqktzu6ufzptoqyvFLIR
-5WcYIPzeo61o3Ediuwx2ygd8MT/OqUbptB5GFJM23apOPrVUyE+9duttZLaI
-psrRmZc7nXnn8azYNNsZZmMlshVQMknaCScDAyO/cnFP2ctPMLo5RpB0IqPc
-A3cD1rqrvSCLeWXToINqbmMbqCcDhsFhnI7g4x15FZsIjTTY3+xxS7VJdiCT
-1PvWkcPzaJkOdtzIRv3mMblBp24EnHA7c9Knl1GBGZFsIVbpkKeP1pdQN35C
-maCKNM8bNmf05qXRSV7jUr9CqXx6cd6A47HFQjJU4IxUeXXkZxWBZdD89TU6
-OVHUcVUtAk1xHHNL5aM2C4XO0fSu+b4W6hKJF069guniuGglVh5e0jbyM9R8
-4ppAcpFckY2gAita11B2wueB2yRVvSfAeo397cRebAq21wLeUo285PcDpjkc
-kitSL4a658rGayIxniQkqME88eimnYQWN6q7QxY+x/8A112OgaqLeRGVlxnH
-DVhH4f6tbmLZdWg4VXLORhycEDrke/6VFeaRe6MYDKVdW+86IxCtuYYJOOfl
-NMD1fVLpbnRbeQDP79efwNdDqRxFEQoY5wPUcV5VoOqvcW5tHkyA6uF/Tj86
-9Uv2P2aHacEkfyqWBz9ywF22DjK5x6UgpL1sXmNv8PJoHSspjQ8111ch2rr6
-KY2FFFFaCCiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKAIrv
-/jym/wCubfyrmK6e7/48pv8Arm38q5es57jQnatfRGCwzE8fMKyDTo7qSAAJ
-naWyQO9EBMs6y7iAFXGN+evXrXOSOMIcdj/WtnWpI/ssRJbJfgAdPlNYEr5C
-jFaks83+J74ubDB52OP1FcCzgnmu0+KUh+3aeOmEc/qK4oCOOLzJF3ZxW1Cj
-Kpe2yBtI2dO1G0FrHbXSKpQOA5ztZWGCDjkeoIzg9QR01mjguYVKqjI2NxyA
-Om0nI45HUDPtiuU+02skaq0O0AdagtZZ+Vh3kg8FTirhGMXZy0aKlBtLlV2d
-fc29vLfCUbD6EtUEloBbSqH/AHTHJwc8DB59Og/KsCSTVYx5rSz7Qc8SE4/W
-q7vd6lmKMSyt3y2cVSrxs5SltsEsPVUlDkd2acl6sNrKyz+ZKzS/dORlxhiT
-06dhms1J3itInU5AU8HoeTTn069srFjJbsVySWUg44p8enXM+h/alCCONDnJ
-54Jp0sbh4QUnJbNfPohzy/FObjyPv8u5BLrLSxMhhgGRjiJBj6cVHfscD60a
-foeo6lE0lrb+ZGvBYsAB+dadt4a1nXkLWtniMHHmO4AP09fwrmeY0Iwn7WaW
-nkL6pVbi4xZz6thTzjigOe546Vr6n4R1rR2iW7tCqysER1YFST0GR0/Grkvw
-88TW93BbPpjtLPnYEdW6YySQcDqOtcP17DWT9otdtV0LdOa0aMrRVsn1+xj1
-Bitk06CdgcYTIzz9K7+ax8KyCS5h8Tyw+Yskgt0mJCsCCoJI3cgeh5AriTp9
-34Z8X29vqNks01vNG8ltw+8cHbxkHI/nXWya/pi63YXOm+Ep4JrG6Mk4WPBI
-wTtIA49eemOOK6ac4zjzRd0yGrF99O8Gec5i8V3ex5GJzJ0wPlJOM+nOD1x2
-qKybw6uuTp/wkN5aWhtk8qZGLbmZcOp+XPUn8AfWpZL7T4WiRfAM8ZAjZmiR
-ZNy43FfukdCCT97jBqxqmoQmC4sE8AukjRukUiRh/LLDcCCq8kBvXjA96uwi
-vJZeFF06a6tNevJJY4TIULYywICryo5O7tnG01zdrqchi8oOxQncVDHGf8k1
-kz2l3ZGMXNvLAZFDp5iFdy+oz1FPt5xG38J+tIZ6L4Mu1k1qOHaOcD6c17JP
-qHmyLbnG0Pw3fp/+uvCPAN35niy0jOAWzwB7GvXo5WXUiM5j3kOufrj9aGLq
-WL0sbxQoG3bxmlXpUN8f9JQg4G3pnpUq9KymUh/auwrjweK7CiAMKKKK0EFF
-FFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAQ3f/HlP/1zb+Vc
-vmuou/8Ajxn/AOubfyrlqznuNB2qN2IAx68U/tVebqADRETJtYlP2a3AjUkv
-ySP9k1hSEnb06Vs6x532O3AYhA3r1G01hvuCDJzWhLPMPikA17Yf7j/zFcTD
-P5ahXUkCu1+KKFr6x29o2/mK4iO5jKgSRZx3FdmEny3alb9RS9C2Ire4iBVc
-EcEgYIqWJI4tNZRIY8/eYD3qobtY4tsCYz3NR2941upjlUPG1TiJRltv5HpY
-StThL3uxoWFxaWquDdtIrdip4q1bxwx6M7LMYkc5MijJHNZ8NzYIdy2rMfTP
-FSWmpfZDLbzxB4jk7TxtryK9GUlePc9jD46jTahUa2aVr6X7vf7i3p99p9gr
-q+oNKr/wsh4rQ02OGbw5NHv2QMXG49lz/hVOws4r+XfYaFNLg4Mj/LGp92Jw
-K6ODw/PFpM1ndzWdsZA3HmZxn8MfrXHVwtSavBO91vY6qePo07RnKLSjK1r9
-baXfco6mksPh62i07aLN2VZHXrtJH862PEsOmQafaW19qM9jbDIUQxkhsAdc
-DtTdFt9L0vTnsbvVBPEeNuxeAeo+8a1oH0OawFnqd0t5CvCF4QDjtk7uvuMV
-w1MsxUZJqN1GTd01d3669UcNTHUKkW07XitNdLdPQy4vEnhweFTo66pNdyDA
-iaWF87t2VGcdjitX4n+JtW8OW2nHSrnyDOzh22Kx4xjqDjrSXFjpCadLb6Ba
-6aJJxgs8uHxntgN/MVg/EeXWNehtFbQZoBalmLRyCbg46henTvXNSyeTxdOT
-pvku2+ble67LzPLrVk4tX18jhotV1bWfGFrfPItzqTzxhC8YIZgQFyoGCOB2
-r0T7N4+0rXL/AFIzafBcXUYabjcrJEqjcBg9mA9eTx1ryoHZeOULhgwKsowR
-/hUx1jU2JJv7rAOcmVs5xj+VfXwhGEVGKskcG56sbf4i2k8e7UtPV4FWIjeD
-gPtXLYHGNi8nHt1qPTbj4h6tcXkEWoWYfT5/JdJU2gttPYrgjGT839a8rXUL
-47Qb2fAxgeaeMdKDqN8lpLbLdTeRK4kkQMcMwyMn35NUFj07VfAfibW4bVr6
-/smmt0MS5XYNg27cELkn58YIGK5fxP4Z/wCEXuLaF7xbh5kLErGVA54wT14r
-kftU5JJlkz1J3GnCeRsFizY45PSi4Hd/DyVR43sAOnz/APoDV7KCE1ncG+YS
-tx69a8K+HU23x5YAjnLjj/cavcXKjWnHIPnNt+uTSewupdvyDOhc/Nt5qaP7
-oxVW+G2VASD8vBFWIsbBj0rOZSJhXY1xorsqKYMKKKK0EFFFFABRRRQAUUUU
-AFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAQ3f/HjP/wBc2/lXK11V5/x4z/8A
-XNv5VylZzGg7VXmIDj6VY7VVuMbqIiYurRoYLbMgzvyBj/ZNZEigADPatbVG
-iCW4wxbd36D5TWU+DJWhLPLPikxW/slH/PM/zrhFQkHOK774mqG1az4yoiPf
-3rhN4LEKOKa2GQtgLxURYmvSofh5pOoaVpaQaq8OrXtutwIpCGUrhy2FAyMB
-eOec4pH+E7JYfvL+OOQO7mc7ivlCJZBlMZDYPr+HenYDzmCXY55A4ru/CGk2
-EttPrepBXiQsI4nOQSo689eSAB069cYrN8VeA/8AhFtOgnfUBNO91JbsoTai
-7QCDuPqCOP8ACqlitybGNftMJhg6ASeuT/jV0VGVRQb3CakocyR1l1qWoXOF
-MpgjI+WOLjavpnrVUQ+pLE9yetdD4Z0i21/TmurrUIraOAhXXGZH/wB0Vu/Z
-vDOnKRFYyXjBM77iU8n02rjFfSxVCi+WELteX6s8tupPWUtDhxCiIWIGAM8i
-mxbJoydoBHY1vXHiaQ/Jb6Rp8KdAPskbf+h0638UlFbz9D0yQ+v2VAf/AB2u
-jmqW+H8TK0e5zUsC5xgCmpdXdowMNzImP4c8flXWSaz4XvP3eoaQbNjwJ7Vy
-uPwbg1n6z4bji006npl+l5YhgG3DZImTgZXuMkcis3GjUfLVhZ+a/VFXnFXh
-Izp7PT/FWnXRdUg1uBd6yjjzh7nvzjOegORgAg+cFNiASqeCeM13NxaCGO7K
-sRJFCpyP9p1Qj8mritWPlahcRMRuSVgT7g187jaUaVVxhsejQm5wTkUecnFG
-T70xQSetTKVGBjNchuIqkngCnhSOODSlgVGBj2FCYz1waAOj+HpKeP8ASsDr
-KR/46a94nYjWpBj/AJbnn8a8F8Ckp480j3uVH58V7vcE/wBsyHt5p/nUvYXU
-v3xBaIqpC4IGanhP7tfpUF6xJjLLg4IxipYWBjXjtUTKROK7OuLFdpRTBhRR
-RWggooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigCG8/48Z/+
-ubfyrk66y8/48J/+ubfyrk6znuNAelVZz89WTVSc/vDilETDVZQVgURrwTyP
-pWVIRn04rV1VpykOQdnP8qx5mwDxWhLPJvitPs1ayUf88j/OuFjuOeOK7T4q
-Ef2xZggf6k/zrgx7ULYZqrf3HmROJ5A8QAjbecoB2HpSy6jeuHY3k53Elv3h
-5JGDn8KzBJjGalWQMKYxZ726uFZJrmV0LbyrOSC2MZ+tXNNkZdsYJCtyR64q
-iVBOas2BxdovoP611YP+NFea/MyrfA/Q7nwreGG8mj5IYAYrqdQMn2UZljQf
-3VOD9K47wwXXUJmQDhRnP1rT1G6k87DYUei/419XWpOckoyseRTmox1VzRiX
-ThCxkf8AeEcDBqSzNiyMJnAOMAEVzyTCRsHJ/wCBH+lK52Dcpb/vo1yyy2lJ
-NOT1ZssVJWslodHZWNtdyFM457c8VJo2nQ2/iy3syQ0E0gUx4wp5A6VzttdO
-HBWU5B79fzFdJpEs7+LdIlfBQ3EYz/wICk8POlzPnvHl28xe0jO2lnc5iY7r
-bU2PU26E/wDf+OuD8QEjxLqa+l1KP/HjXoMrQxRaoJo2YCAcK2P+W8ftXHeI
-5tOPijUsWcxb7XJuYTjBO9skfL9PyPrx4WZSarPS/wDwyO/CK8bXH+FvCU/i
-WG/kguUj+xxiQxhGeRwT/CqjJA7+laUPww8WStAF0sjzk3qWlQADj73Pyn5h
-wfWrPw0sNXv9auBok1vZSRQ+Y1zPAspQ9PlJB2k5P4Dvit7Q7zxlqmoajbz6
-qIZtNgAlDWKSPKhIABG3LcYPNcSd0dLVnY5TxD4F1Dw3plnf3JBinQbwwCmO
-QlspjPONvX3Fc6ABxivTdY0LxrrOmrZJdJeaf5UcypIkMOCVZwFA5zjd0wex
-GK5bxB4Ju/DnhmDUr+VFuJLnyGtlIYoNgcEkHg4PSmIreDm2+NtH4/5e4/8A
-0IV7vcAjVXYHjzOlfPvhKfHjTSCP+fuL/wBCFe/znOosQcHfUvYXU0r4uPL3
-nJwe9S25zCnHGBVe8GFiw4brzU1sT5CZ9KzmUi0DxXa1xI6V21OmDCiiitBB
-RRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFAEN5/x4T/9c2/l
-XJV1t7/x4XH/AFzb+VciKzmNC9qpTn96QKuE1QnP75h70oiYupKQYiXU8HgH
-6VlTd61NRMe+EKW3YPXp2rLmyWYVbJPIPisf+JxZf9cT/OuCzxgV3vxYGNas
-h/0xP864HpQthjgfloDEd677RPAmj6n4O0+9uNVe11K/laG3RiCjOHVQNuM9
-GyTnjFOm+EuoQPNE2oW5nSAzpAqnfIAzKQoOM/cz9COKqwzghI2Kuaad10P9
-0/zrpPG/gaHw3YW+o2V35lrK0cTRPnejtErnnABHJ/SsDSLYmJrjIwhCY+uT
-/SurBfx4+q/Mxr/w36HT6A2Lqc89B061Y1i5eJkEURZmYIqk4yar6A22edgO
-cCjVnP2i3LEZMw4/CvsZfGeKvhK//EyDHD2kZ9Pmb+lDPqSj/XWbj0O8f0qX
-zeTSq/qCa05BXEs7qYzGKaEIwXcCrbgwrr9KfbrGksCxP2iM4J6fMK5O2wdR
-QKmf3RP6iur05wb/AE9+AFmjzxjowrmrr3X6GlMyPEP+j3evR4+6pXH0uI64
-jX8f8JJqRIHN1L/6Ea7bxgANV8RY9X/9KY64PxJIB4m1MZ6XUn/oRr5fHu9T
-7vyR6uGXulvQ/Feq+G3lfS7oQmXbvBjVwSpyDhgeQehqGTxVqjzalIbn59SB
-F0di/vMtu9OOfTFYfmjbt6VGzH0rhOg6yP4heJII4o49UZUiVVQCNOAqlR2/
-usR+NVda8X63rthDaajqD3EEbBlRlX7wG0EkDJOOOa5sORTw3HUj2poDc8LO
-R4t0gg9LuP8A9CFfQs5H9ptk4O4Zr5z8OyBPE2mNj7tzGf8Ax4V9FXGP7SYn
-++KmQupqXYAjiCsSMnqKmtMi3T6VBeMHjjwoUAkcVLaf8e6c1nIpFxTXb1wy
-13NOmDCiiitBBRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFA
-EF7/AMeFx/1zb+VcjXXXv/IPuP8Arm38q5AVnMEKelUZhulJzyDV09KoyY81
-ue9KIMTUXRpYVWMKcNzn6Vmy/eNamptOZIBICEw2OPpWVL95qtiPIviyD/bV
-l/1xP86XwZ8O4vFHhm/1CaeWOZCUtFRlAdgMtnPYZXPTgk9sUfFUj+3LMf8A
-TA/zNcpaatqGnwNHZ39zbxtyyQysoY+4Boi9BpHZeEvBsHiPS7OefV5rfZqn
-2REWX5QCm4mPg/NkD24rZsPh9rT3kb6h4iu5bWeI+ckU7htrI7oNx4bocj3r
-y+2vb2GJBb3M0aK/mBUcgBumeO+O9K2q6kqRIL66CR5Ma+a2Fzwcc8VWgM7H
-xf4UuPDXhC2ur3UJ7u8a8EbK5JhAMIYYB6kA4yPp2rndMaSfTXlwiosioVRQ
-MnDYP6frWZd315cWccNxdTypGRtR5CQvHGB9KfpUsiv5QYhDyV7Ejp/M104K
-KeIi/NfmZ15NUmvI6rRJNkkoGByDUmsqJJbd17SjI/CodDIE0h9xzWnqNr9o
-t8RvskVtwOM9q+yk7TPEirxMgHnpzU8ZBIBNRLY3m4k3MBwO8R/xqT7HeqoI
-ubcg8f6o/wCNbOSISHLIiaqgCn/UnnPvXRWM4Q2zFflEinBPXkVgWFlI12ZZ
-5Fd8bRtXAArUysBUHsQcVzVUmrGkdNRfHimLXfEakfxSEf8AgRGa8z8SuT4q
-1Qg8fapP/QjXp3xMkUeJNbK8Bx/7UjNeW+ITnxNqRz1uZP8A0I18ljHefyX5
-I9ehsZ+c0ozjFIBg0/FchuAA9KCM9KVR6U/bjGRSHYs6S5TWbNv7syH9RX0n
-M2b9iB/EK+bbVwlzBgDiRT+tfR5YGZiB3HNJi6mxebjDEXGDnjjHFPs8eQuD
-61HdZWGPcwY57HOKdZkeQPqf51MxouCu7rgx0rvKKYMKKKK0EFFFFABRRRQA
-UUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAQXv/IPuP+ubfyrjxXYX3/IO
-uP8Ark38q44Gs5ghSeKoSEea3+9V09KoO375hj+KkgYaigWeE+ajHa3Cn/dr
-Nl6tWhqBiFxDs37tjdcY6rWdIRlqsR5H8Vv+Q3Z/9cP/AGY1wRcgc9K7z4q/
-8hqz/wCuJ/nXAP0pIuOxPDcmNBipBdbiQVBqipwo/lSgkGqGWxIHd81Pph/0
-v2waz1fBIzV/S/8AX5x2rswC/wBoj6o58T/DfodRpEvltKfcVsedGyt1OR1H
-auesWwZB712Oh6RqFnfwS3lg/wBkmwjF8DhuBn05I619diZqnHmZ49CHO+Uw
-d7FXI6Y61JHI/wC7jxjnNdf9jtLW1d1sgJNOQwyszqwaRgoUkfUmtTVfsWmv
-bRzJH9onneNXFpG5YjaBknGMZ6gVw08w59OQ6auEVPaVzzm1uMXJ3cDnvUrX
-I3sgOQDwaseJbT7P4tv4lOESUgHAHb0AArLZgZRtHOMfWvRVpx5u6ON3TsXf
-iTceZrd5IMYdQePqleea3h/EF847zuf1rsvHTk3QJ6lFP/oNcTqB36nct6yH
-+dfH45WqNen5I9nD6xIZVVXwOmBSdqV23NnPYU30riOglQc4BzUj/dXgcVCh
-xTmdcYFAyaEgSxn0Yfzr6PVskntkV82Rtgr9RX0fC52ZxxgH9Kl7Evc3LnYL
-ZAhLfNzke1SWZHkDjuainZGt02JtAPPOc8U+0P7r8TUyGi4CMV31efrXoFOm
-DCiiitBBRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAUUUUAFFFFAEF9/y
-Drj/AK5N/KuNHSuyvv8AkHXP/XJv5VxYrOYCk8VnOf37f71aB6Vmyf69uf4q
-SAW/eNriERxBSEbJyT3Ws6Q/e4rT1FpzPD5iFV2Nj5cf3azJM5arYjyP4rkD
-WbL/AK4n+dcAzfLXoHxWQtrNmR/zxP8AM150+4DFJFrYcn3BS55qJX2qKTzO
-aqwXJB1NaWk/8fH/AAGssHitTSR+9J/2P6iu3L/94j6nPif4bOi08gM+SRzX
-oqeJ9CM0U1+Bfzq6bZRa+W4Udd/OG7ce1eb2iusbMY2COflbHBxVjkkEA/lX
-11ahGra72PFhUcFoeijxPpW9t9xE1x5e2O6EMmVG7OGOd3Pt0qQeKdBbykl8
-ssDIxkjhYKuWUkBT/eAPPUV52OnINIwHoa5/qFPuzT28ux6LdeJ9H8i8dJbS
-WQxP9mDW7Myk4wp3LjHH0rzue4aa8eZwNzks20ADJPYDpTQh7Bqjm/dLuYHL
-cCt6OHhSTUepE5ue5V8Wz+d5L9flA/lXKS/PO7dyxroNecPHCoPRa50/fP1z
-XyuYq1eXr+iPXwr9xDcCk9qcVxzSY9BXn2OkTNJnilpCeMUAPQ8gD1r6PtiT
-AjZ6qD+lfOETsj5VipPHB7V9G2hJtIiDyY1PH0qXsJ7nQXMjNaIQioA2OBjP
-FPssiE59TTbsTi2TzifvcAnpxS2nEZwf4qmQ0XAa9BrzwGvQ6dMGFFFFaCCi
-iigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKAK9/wD8g25/65N/
-KuLB4rtL/wD5Btz/ANcm/lXFdqzmAE8VnSf69v8Aeq+TxWfKR57D3pIBdQRl
-uIS0qv8AI3Rs/wB2s9+rc1dvhEs8OyQsdrfw4xytZ7nlvrViPKfis5XWLID/
-AJ4n+dcA4V4zxzXd/Fk/8Tmy/wCuJ/nXAbuKSNFsRCImMMKhPBq2pxGB7VFJ
-HxlRzVJktDA3y1qaRIPM+dtiDqxBx9KyCPlFWbK5ktZN0YUgjDIwyGHoa2o1
-XSmpx6GdSCnHlZ2a6hG1vEjXW+JB+7TJwgPJGO3NPinimbbG+4+grlJ9RkvS
-MwxReWMDylxn61WRZ5plhRmy5C4B616LzafY5Vg49zu4Skyjy5N3uOR+lOmZ
-II2d2OFGTkEVnWMP2CNrRZg7wnaxHY9cU3UrtrXT3mkRZRkDY/RvY170ZRdD
-23TlucDTU+TzLUOp2sqbkmU46ru5FSi9tHT52XHuc1zt7p9jcaMmsaRugZGC
-XFvuJ2H1B9DVWzKT27/a5pFAjYgqAfmAO3Oe2a8JZs7/AA/id/1RdyxrlzDN
-dH7OQURQOBgVkZ5HrROZEEYLfKVDAVGGIxXn4iu60+ZnTSpqEbImJ5xSZAqN
-mO7igNWBqOYg8YpuR3pM80vGaQDkI3CvomwIOnQnpmFT/wCOivnQcMK+iNPY
-f2VATwPIU/8AjopMXU6WaMRwKPMRzn+E9KfaY8s4/vVFOIVhUI7Oc85XFPtD
-8hx61EhourXolecqa9Gp0wYUUUVoIKKKKACiiigAooooAKKKKACiiigAoooo
-AKKKKACiiigAooooAr3/APyDbn/rk38jXEdq7fUP+QZc/wDXJv5GuHrOYAel
-UJ8ecfrV09KoTn98aEA2+eNpYQkQQ7Wyck56VnueWrSvzcFoDLnZtOOntWY/
-3mqhHlHxZ/5Clif+mTfzrz7PFeg/Fj/kKWH/AFyb+dedk4ojsWth4+6MUmeK
-aGwKYW5pgKU6U5AQRQMECgYB4pkksP3HPvitfwreQ2PiuwuJ4leNZMENjGSC
-AfwJB/CsZDiL6mu0+GngOXxvrUqOzR2duuZZV4IJB24/EUpbCbsYsF2+n6zd
-W92rKzykkkdDmk1u7F3AFjJMYPJxXaeObbw63iGDRZbgx6hYxCKa+jTKyHnh
-gO4GOfXI6AAUz4d8O29mfP8AEiTgjiO3t2LH2OcAfrXZHMav1f2HQx+rwc/a
-HN6DEq+F9enlbCeWiIp7sW/pj9ay4WBgdParmtX6eXHpllE0NjC24Bj80jf3
-mrMhf5setcS7m45mE0cYYY2Jt+vJpjRDbkelLGMZFPb7hpgivINrkdqTbxwK
-dLy+fbtTOQKBi0CmjOaeM4wO9IYDqK+htNIOiwE5x9mXP/fIr58TaFIK5J6H
-0r6C0vA0G3JXI+zLx/wEUmSzpJ/I8lRFvznndipbXHl/jUM8kbKoSIJz6k1N
-a8R/jUyGiyK9IrzcYr0inTBhRRRWggooooAKKKKACiiigAooooAKKKKACiii
-gAooooAKKKKACiiigCvqH/IMuv8Ark38jXC9q7nUf+QXdf8AXFv5GuFzUSAD
-0qhcH9+1XSaoXP8Arj9BSQmNvFjDQFZdzYPG3HaqTfeb61au5I/9GCxYOSN2
-f9mqjnDNVMDyb4tNjVbAf9Mm/nXnh5FegfFw/wDE2sP+uJ/nXnobihbFIMn0
-pMUuaWmMUdKUUoXjpRiglirxHj3Ne7fBqXT9K8HXrzXyw3M7+bgngKBgZ/HP
-5ivGLawa70yaWHDSQnLJ3x6/59/Smx6pfWoZY7qVMpsbDHlcYx9MUOzJauX3
-mk1DVbrUZvv3ErSc+5zU4GAcVVsMi0QH649K0VjBQNkD1oKMzVbR5lSSNMkc
-HFZ01nNaeQ0q4E0YkT6ZI/pXSBgxCIQaj1y48/SbKGSGJBa7kSRR8zgnOD7A
-k0COcTuak6jFNXhcCtzw5ZSXzXkUVrBO5iwPNONpz1Bxj88fUUxnPONuPpUZ
-r0iDTbg2wUeHNNkZcBd8yEtjHPH59f65qWugXdrHJDLodlKMsSJLlMrkjHPX
-j69O1Kw0cEOtOrv7TToWmu4l0GwRocKxlnOMYJJHHI9/pWUvgvUL5pLuBLaG
-BzuRDMMLk8L+AP6UrDOXA5r6E0fI8O2hwD/oqcH/AHRXhF5YyWNw8EwAkQDO
-DkcjNe9aGG/4R6yK/e+zR4x/uihiZ0E0pk2gxov+6uKmtxiP8ahnMx8vzSxG
-Plz6VPAP3QqJAiYCvSa83Ar0inTBhRRRWggooooAKKKKACiiigAooooAKKKK
-ACiiigAooooAKKKKACiiigCtqP8AyC7r/ri/8jXB54rvNR/5BV3/ANcX/ka4
-AGokA4niqN1/rPwq2TxVK5+/+FJALdtOIYA64jPT5cdqosOScVaulASAiVW/
-2Rn0psVlc3EMrQoWC4zg9Pw79KqxJ4z8XB/xN7ADOPJP8688A5r33xh4Oi8S
-6aF81YruLJibqM+h9q8qm+H3iGGQobEtjujAihO25SOZCjPJI+lKBiuh/wCE
-G8QDk6dJ+lA8Ea//ANA6X8qLjuYSnAprEiuhHgvXgOdNm/Km/wDCFa9/0Dpf
-youDMS1vJ7O5WeByrD071pWq2mqTnzWELnoBgAmrY8Fa7j/kHSflTv8AhCtc
-J40+QU7oRL9jlgXJhcqOhXlfzFEcm7gRMXJxtAzmli8L+J7cjybedSPQ1K+h
-+MZUKsk5U9RupAJLdi0T/SFSP/Y/i/8ArVgX1+97NuIwg4Va1D4L8RO257CR
-j7kU4eCde/6B7/mKLoDABwMVe0y8s7SSRrywF2rLhVMjJtPrxWj/AMITr3T+
-z3/MUh8E6/njT3/MUXKTF/tzRBMrL4eAUZOPtT/z/wA9vxRdf0wXMztoiNDI
-EHlmU5XaD0bGeTgn6Un/AAhOv/8AQPf8xTv+EI1/H/IPf8xRzDuhW8QaRuLR
-eH4o23qwJmZuAQSMHjnGPxqxH4m0zB3eH4TnkqszBc4wSF5A/pVf/hCdeA50
-9/zFC+DNf6DT3p3C6K+rXunXcEIstPNrKM+ZiQsp9Ote2aArf2Bp6N8rfZ4x
-zxj5RXnnhr4dXsl7HcasixwociEHJc++Ogr1BIxbpmTCKMDjtSZLfY0Jl2eW
-d6tkdj0q1Af3QqpKqAoEfd+GKswnES1EgRYB4r0mvNAeK9Lp0wYUUUVoIKKK
-KACiikJxQAtFNLhRkkCq4vDKWEERk2nBI4H60AWqKqfarnfs+xvnGeox+ecV
-JFcF3KPGUcDO00AT0UUUAFFFFABRRRQAUUUUAFFFFAFbUv8AkFXf/XF/5GvP
-s16DqX/IJu/+uL/yNeeZqJAKTxUW2KSUq23IGfmJFPNRsaSYD3jjaNUaRdi9
-BuOB+lS297b2lrLCI1bzBgtlsiqTHioHbjinzAOlW2Lkgj/gRP8AQVWkWD/n
-pCPxb/CmyNxVSU1PMIc6Wv8AFcR/QBv8KryR2x+7cQge+7/CoZKgYUcwE/l2
-4/5eof8AvljTCLMHm7X8ImP9arstRlaXMBcBsO9y/wCEB/8Aiqd5mnD/AJby
-f+A//wBlWfto49KOYZoiXTx/y3f8bb/7KgPp+f8Aj4f/AMBv/sqztwHalDj0
-o5gNPdp+eJ2+n2c//FU4tppHDtn/AK5N/wDFVliQelOEg9KOYDSAsT0mI/4A
-f/iqeEsu0+Pqp/xrMDinBhRzAaQjtz0uox9Vb/CnrHFji8t/xD//ABNZysKe
-CKOYRoiKM9bq3P4sP5rUq28R6TQH/toBWauM1OmOKOZDN/TjZ2brK8cMzD+F
-pV20kyR3M7uFQBmyVEi4rJjIzVqMinzBY0DBE2N3BHpIo/pSRY2DHT3OagQi
-plOBxSbuOxMDxXp1eXg16hVUwYUUUVoIKKKKACqmpXDWti0qjkVbqG7hE9s0
-ZHBFAFZ7W1ji33dwWBx8zvtH4Yps7s9gh0to0Qv8zjACjv1/Cq9u3m6cYpBm
-Wzbv3X/9WfyqNI4JC9w8BlPmeXFCvRmxnJ/D+VAD/t8kVg0S3iz3Och0XIA+
-vQ1bjlMotLjAzIm1iPX0/nTRGQqpd/YokPSILyB7HI5/CgW/2Oz2MQVSbMXP
-UH/9ZoA0aKKKACiiigAooooAKKKKACiiigCtqX/IJu/+uL/yNefY4r0HUv8A
-kE3f/XF/5GvPe1TJANYVC2fSrIAIpNoPapsIoPn0qB8+lahiU9qaYUI6UrDM
-ZgfSoHQntW4bePH3aabaL+7SsI55oSR0qI27eldIbaL+7QLaLH3aVgOXNo56
-Cm/YpMdDXV/Zov7tKLaL+7TsByX2GT0o+wS+ldeLaL+7S/Zov7tKwzj/ALBL
-/dpPsMv92uyFtF/dFH2WL+7RYDjfsUv92k+xyf3a7T7LD/cpPskP9yiwWON+
-yyf3aBbOP4a7D7HD/cpps4f7tFgOTELgfdNOETD+GunNnD/dpptIc/dpWA5x
-VYdqeu4djW8bSHP3aT7LEB92iwGOrsD0q1FKeOKu/ZYs/dpRBGOgp2GMjk4q
-wj8UwRKBwKeFAoAkDV6pXlIAFerVcAYUUUVoIKKKKACkNLSGgDKuAbHU47oc
-RP8AJJ7D1qe2ihsd9uLtd0rEopIyOOMetXGVWGGAIqA2FqUKiCMA9QFxQBQG
-lTNEUkSEMfvysSxPvU1uiTzRrFlra3XahP8AEfX/AD71N/Z1uQAwd1H8LuWH
-5E4q0qhVAUAAdhQB/9k=
-
---= Multipart Boundary 0901041737--
-
-

mozilla/mstone/data/en-3k.msg

@@ -1,57 +0,0 @@
-From bownrdstrm@attb.com Sun Jun  6 07:52:37 2004
-Return-Path: <purgcrw@attb.com>
-Received: from leggite.example.com ([207.111.254.118]) by snacker.example.com
-          (Netscape Messaging Server 4.15) with ESMTP id HYW65I00.GCU for
-          <exp@example.com>; Sun, 6 Jun 2004 07:41:42 -0700 
-Received: from accfd8ce.ipt.aol.com (ACCFD8CE.ipt.aol.com [172.207.216.206])
-	by leggite.example.com (8.12.8/8.12.8) with SMTP id i56EpkRt007759
-	for <exp@example.com>; Sun, 6 Jun 2004 07:52:03 -0700
-Received: from [220.15.207.252] by 172.207.216.206 with dazzle SMTP;
-	Sun, 06 Jun 2004 08:52:37 -0600
-X-Authentication-Warning: ryder ancestral 
-Date: Sun, 06 Jun 2004 08:52:37 -0600
-From: "Stphn Hand" <bownrdstrm@attb.com>
-Reply-To: "Stphn Hand" <resceflblb@attb.com>
-Message-ID: <3749823059370.835538001008932913@chckwll>
-To: exp@example.com
-Subject: 
-References: <168425683841079245159@duke>
-In-Reply-To: <7406146144666267721836@prevalent>
-X-Mailer: silicic leafy 
-Content-Type: text/html;
-  charset=us-ascii
-Content-Transfer-Encoding: 7bit
-
-<html>
-
-
-
-<body>
-
-<p><br>
-</p>
-
-<p align="center"><a href="http://www.cFZ.phrnw.com/tp/indx.asp?ID=w">&nbsp;</p>
-
-<p align="center"><img src="http://www.zP6.qwmeds.com/wlt.gif" border="0"></a></p>
-<p><br>
-<br>
-<br><br><br><br>
-<br><br><br><br>
-
-To say adios muchachos head on over to go to: pharmnw.com/host/emlremve.asp<br>
-
-
-<br><br><br><br>
-broach glutamine gurkha disciplinarian brawl atypic ridicule dandy hereof difficulty yourself satellite courtney alicia elude mcleod consist dunedin charlotte shoe bequest aluminate handlebar nebular bent booty  shutout concision algonquin more connector tuple barge downriver denebola urgent caleb gordon shield prima perhaps dar dreg weir ecuador edible broke compactify circuitry forsook fiske moscow tall influence alterman mountain such excuse railbird caw  
-
-</body>
-</html>
-
-
-<br><br>
-ghana managua ptolemaic ritter tina aden travel wang morn someone cocoon apparatus manchester crime daniel florin aile handicapped effort hairy poodle allegation doubloon basis fantasia windward chisel brink bibb fashion aspire farcical sorority eastward callahan cyrillic thoroughgoing awoke thyrotoxic adopt  dial simultaneous zeiss partisan elm commission eat ornately drumlin grandeur shields awaken meningitis aren't equipped intractable dwarf behest featherbrain 
-shell vacationland disseminate regurgitate decolonize jules methodology beverly drowse cried earl applied storeroom cattle revved kim sharp frizzle bevel continua hangable  rhodonite carcinogen bodybuild dusenbury acapulco pine stormbound ark suspension katz fabulous lend lilly matthews firewood groggy gallop 
-apocalypse break valois emporium flown cookbook jeff fanout nathaniel mollify royalty twirl whittle amethystine ladylike plywood terpsichorean analyses avocate basis hemingway aluminate gladiolus levin polymer arkansan diagnostician danielson augustus deplore rachmaninoff assyriology model alexander importune civic sprite concise haughty  wean peripatetic shove booky sonny book lyric presence cruz boisterous buttercup sidelong breed distributor 
-
-